summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc/lpfc_init.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_init.c')
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c30
1 files changed, 23 insertions, 7 deletions
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 226920d15ea..b8eb1b6e5e7 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3006,6 +3006,7 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
struct lpfc_vport *vport;
struct lpfc_nodelist *ndlp;
struct Scsi_Host *shost;
+ uint32_t link_state;
phba->fc_eventTag = acqe_fcoe->event_tag;
phba->fcoe_eventtag = acqe_fcoe->event_tag;
@@ -3052,9 +3053,12 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
break;
/*
* Currently, driver support only one FCF - so treat this as
- * a link down.
+ * a link down, but save the link state because we don't want
+ * it to be changed to Link Down unless it is already down.
*/
+ link_state = phba->link_state;
lpfc_linkdown(phba);
+ phba->link_state = link_state;
/* Unregister FCF if no devices connected to it */
lpfc_unregister_unused_fcf(phba);
break;
@@ -4506,9 +4510,13 @@ lpfc_sli_pci_mem_setup(struct lpfc_hba *phba)
pdev = phba->pcidev;
/* Set the device DMA mask size */
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0
+ || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(64)) != 0) {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0
+ || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(32)) != 0) {
return error;
+ }
+ }
/* Get the bus address of Bar0 and Bar2 and the number of bytes
* required by each mapping.
@@ -6021,9 +6029,13 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
pdev = phba->pcidev;
/* Set the device DMA mask size */
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0
+ || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(64)) != 0) {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0
+ || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(32)) != 0) {
return error;
+ }
+ }
/* Get the bus address of SLI4 device Bar0, Bar1, and Bar2 and the
* number of bytes required by each mapping. They are actually
@@ -7218,8 +7230,6 @@ lpfc_prep_dev_for_perm_failure(struct lpfc_hba *phba)
{
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2711 PCI channel permanent disable for failure\n");
- /* Block all SCSI devices' I/Os on the host */
- lpfc_scsi_dev_block(phba);
/* Clean up all driver's outstanding SCSI I/Os */
lpfc_sli_flush_fcp_rings(phba);
}
@@ -7248,6 +7258,9 @@ lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state)
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ /* Block all SCSI devices' I/Os on the host */
+ lpfc_scsi_dev_block(phba);
+
switch (state) {
case pci_channel_io_normal:
/* Non-fatal error, prepare for recovery */
@@ -7499,6 +7512,9 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
error = -ENODEV;
goto out_free_sysfs_attr;
}
+ /* Default to single FCP EQ for non-MSI-X */
+ if (phba->intr_type != MSIX)
+ phba->cfg_fcp_eq_count = 1;
/* Set up SLI-4 HBA */
if (lpfc_sli4_hba_setup(phba)) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,