diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_mbox.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_mbox.c | 674 |
1 files changed, 631 insertions, 43 deletions
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index 134fc7fc212..b9b451c0901 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2008 Emulex. All rights reserved. * + * Copyright (C) 2004-2009 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -28,8 +28,10 @@ #include <scsi/scsi.h> +#include "lpfc_hw4.h" #include "lpfc_hw.h" #include "lpfc_sli.h" +#include "lpfc_sli4.h" #include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" @@ -39,6 +41,44 @@ #include "lpfc_compat.h" /** + * lpfc_dump_static_vport - Dump HBA's static vport information. + * @phba: pointer to lpfc hba data structure. + * @pmb: pointer to the driver internal queue element for mailbox command. + * @offset: offset for dumping vport info. + * + * The dump mailbox command provides a method for the device driver to obtain + * various types of information from the HBA device. + * + * This routine prepares the mailbox command for dumping list of static + * vports to be created. + **/ +void +lpfc_dump_static_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, + uint16_t offset) +{ + MAILBOX_t *mb; + void *ctx; + + mb = &pmb->u.mb; + ctx = pmb->context2; + + /* Setup to dump vport info region */ + memset(pmb, 0, sizeof(LPFC_MBOXQ_t)); + mb->mbxCommand = MBX_DUMP_MEMORY; + mb->un.varDmp.cv = 1; + mb->un.varDmp.type = DMP_NV_PARAMS; + mb->un.varDmp.entry_index = offset; + mb->un.varDmp.region_id = DMP_REGION_VPORT; + mb->un.varDmp.word_cnt = DMP_RSP_SIZE/sizeof(uint32_t); + mb->un.varDmp.co = 0; + mb->un.varDmp.resp_offset = 0; + pmb->context2 = ctx; + mb->mbxOwner = OWN_HOST; + + return; +} + +/** * lpfc_dump_mem - Prepare a mailbox command for retrieving HBA's VPD memory * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. @@ -58,7 +98,7 @@ lpfc_dump_mem(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint16_t offset) MAILBOX_t *mb; void *ctx; - mb = &pmb->mb; + mb = &pmb->u.mb; ctx = pmb->context2; /* Setup to dump VPD region */ @@ -90,7 +130,7 @@ lpfc_dump_wakeup_param(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) MAILBOX_t *mb; void *ctx; - mb = &pmb->mb; + mb = &pmb->u.mb; /* Save context so that we can restore after memset */ ctx = pmb->context2; @@ -125,7 +165,7 @@ lpfc_read_nv(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { MAILBOX_t *mb; - mb = &pmb->mb; + mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->mbxCommand = MBX_READ_NV; mb->mbxOwner = OWN_HOST; @@ -151,7 +191,7 @@ lpfc_config_async(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, { MAILBOX_t *mb; - mb = &pmb->mb; + mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->mbxCommand = MBX_ASYNCEVT_ENABLE; mb->un.varCfgAsyncEvent.ring = ring; @@ -177,7 +217,7 @@ lpfc_heart_beat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { MAILBOX_t *mb; - mb = &pmb->mb; + mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->mbxCommand = MBX_HEARTBEAT; mb->mbxOwner = OWN_HOST; @@ -211,7 +251,7 @@ lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, struct lpfc_dmabuf *mp) struct lpfc_sli *psli; psli = &phba->sli; - mb = &pmb->mb; + mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); INIT_LIST_HEAD(&mp->list); @@ -248,7 +288,7 @@ lpfc_clear_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { MAILBOX_t *mb; - mb = &pmb->mb; + mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->un.varClearLA.eventTag = phba->fc_eventTag; @@ -275,7 +315,7 @@ void lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { struct lpfc_vport *vport = phba->pport; - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); /* NEW_FEATURE @@ -321,7 +361,7 @@ lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) int lpfc_config_msi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) { - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; uint32_t attentionConditions[2]; /* Sanity check */ @@ -405,7 +445,7 @@ lpfc_init_link(struct lpfc_hba * phba, struct lpfc_sli *psli; MAILBOX_t *mb; - mb = &pmb->mb; + mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); psli = &phba->sli; @@ -492,7 +532,7 @@ lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi) struct lpfc_sli *psli; psli = &phba->sli; - mb = &pmb->mb; + mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->mbxOwner = OWN_HOST; @@ -515,7 +555,7 @@ lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi) mb->un.varRdSparm.un.sp64.tus.f.bdeSize = sizeof (struct serv_parm); mb->un.varRdSparm.un.sp64.addrHigh = putPaddrHigh(mp->phys); mb->un.varRdSparm.un.sp64.addrLow = putPaddrLow(mp->phys); - mb->un.varRdSparm.vpi = vpi; + mb->un.varRdSparm.vpi = vpi + phba->vpi_base; /* save address for completion */ pmb->context1 = mp; @@ -544,10 +584,12 @@ lpfc_unreg_did(struct lpfc_hba * phba, uint16_t vpi, uint32_t did, { MAILBOX_t *mb; - mb = &pmb->mb; + mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->un.varUnregDID.did = did; + if (vpi != 0xffff) + vpi += phba->vpi_base; mb->un.varUnregDID.vpi = vpi; mb->mbxCommand = MBX_UNREG_D_ID; @@ -573,7 +615,7 @@ lpfc_read_config(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { MAILBOX_t *mb; - mb = &pmb->mb; + mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->mbxCommand = MBX_READ_CONFIG; @@ -598,7 +640,7 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { MAILBOX_t *mb; - mb = &pmb->mb; + mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->mbxCommand = MBX_READ_LNK_STAT; @@ -607,7 +649,7 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_reg_login - Prepare a mailbox command for registering remote login + * lpfc_reg_rpi - Prepare a mailbox command for registering remote login * @phba: pointer to lpfc hba data structure. * @vpi: virtual N_Port identifier. * @did: remote port identifier. @@ -631,17 +673,23 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) * 1 - DMA memory allocation failed **/ int -lpfc_reg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t did, +lpfc_reg_rpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t did, uint8_t *param, LPFC_MBOXQ_t *pmb, uint32_t flag) { - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; uint8_t *sparam; struct lpfc_dmabuf *mp; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->un.varRegLogin.rpi = 0; - mb->un.varRegLogin.vpi = vpi; + if (phba->sli_rev == LPFC_SLI_REV4) { + mb->un.varRegLogin.rpi = lpfc_sli4_alloc_rpi(phba); + if (mb->un.varRegLogin.rpi == LPFC_RPI_ALLOC_ERROR) + return 1; + } + + mb->un.varRegLogin.vpi = vpi + phba->vpi_base; mb->un.varRegLogin.did = did; mb->un.varWords[30] = flag; /* Set flag to issue action on cmpl */ @@ -697,15 +745,16 @@ lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi, { MAILBOX_t *mb; - mb = &pmb->mb; + mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->un.varUnregLogin.rpi = (uint16_t) rpi; mb->un.varUnregLogin.rsvd1 = 0; - mb->un.varUnregLogin.vpi = vpi; + mb->un.varUnregLogin.vpi = vpi + phba->vpi_base; mb->mbxCommand = MBX_UNREG_LOGIN; mb->mbxOwner = OWN_HOST; + return; } @@ -725,15 +774,15 @@ lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi, * This routine prepares the mailbox command for registering a virtual N_Port. **/ void -lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid, - LPFC_MBOXQ_t *pmb) +lpfc_reg_vpi(struct lpfc_vport *vport, LPFC_MBOXQ_t *pmb) { - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); - mb->un.varRegVpi.vpi = vpi; - mb->un.varRegVpi.sid = sid; + mb->un.varRegVpi.vpi = vport->vpi + vport->phba->vpi_base; + mb->un.varRegVpi.sid = vport->fc_myDID; + mb->un.varRegVpi.vfi = vport->vfi + vport->phba->vfi_base; mb->mbxCommand = MBX_REG_VPI; mb->mbxOwner = OWN_HOST; @@ -760,10 +809,10 @@ lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid, void lpfc_unreg_vpi(struct lpfc_hba *phba, uint16_t vpi, LPFC_MBOXQ_t *pmb) { - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); - mb->un.varUnregVpi.vpi = vpi; + mb->un.varUnregVpi.vpi = vpi + phba->vpi_base; mb->mbxCommand = MBX_UNREG_VPI; mb->mbxOwner = OWN_HOST; @@ -852,7 +901,7 @@ lpfc_config_pcb_setup(struct lpfc_hba * phba) void lpfc_read_rev(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->un.varRdRev.cv = 1; mb->un.varRdRev.v3req = 1; /* Request SLI3 info */ @@ -945,7 +994,7 @@ lpfc_config_hbq(struct lpfc_hba *phba, uint32_t id, uint32_t hbq_entry_index, LPFC_MBOXQ_t *pmb) { int i; - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; struct config_hbq_var *hbqmb = &mb->un.varCfgHbq; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); @@ -1020,7 +1069,7 @@ void lpfc_config_ring(struct lpfc_hba * phba, int ring, LPFC_MBOXQ_t * pmb) { int i; - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; struct lpfc_sli *psli; struct lpfc_sli_ring *pring; @@ -1075,7 +1124,7 @@ void lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) { MAILBOX_t __iomem *mb_slim = (MAILBOX_t __iomem *) phba->MBslimaddr; - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; dma_addr_t pdma_addr; uint32_t bar_low, bar_high; size_t offset; @@ -1099,21 +1148,22 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) /* If HBA supports SLI=3 ask for it */ - if (phba->sli_rev == 3 && phba->vpd.sli3Feat.cerbm) { + if (phba->sli_rev == LPFC_SLI_REV3 && phba->vpd.sli3Feat.cerbm) { if (phba->cfg_enable_bg) mb->un.varCfgPort.cbg = 1; /* configure BlockGuard */ + mb->un.varCfgPort.cdss = 1; /* Configure Security */ mb->un.varCfgPort.cerbm = 1; /* Request HBQs */ mb->un.varCfgPort.ccrp = 1; /* Command Ring Polling */ mb->un.varCfgPort.cinb = 1; /* Interrupt Notification Block */ mb->un.varCfgPort.max_hbq = lpfc_sli_hbq_count(); if (phba->max_vpi && phba->cfg_enable_npiv && phba->vpd.sli3Feat.cmv) { - mb->un.varCfgPort.max_vpi = phba->max_vpi; + mb->un.varCfgPort.max_vpi = LPFC_MAX_VPI; mb->un.varCfgPort.cmv = 1; } else mb->un.varCfgPort.max_vpi = phba->max_vpi = 0; } else - phba->sli_rev = 2; + phba->sli_rev = LPFC_SLI_REV2; mb->un.varCfgPort.sli_mode = phba->sli_rev; /* Now setup pcb */ @@ -1245,7 +1295,7 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) void lpfc_kill_board(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) { - MAILBOX_t *mb = &pmb->mb; + MAILBOX_t *mb = &pmb->u.mb; memset(pmb, 0, sizeof(LPFC_MBOXQ_t)); mb->mbxCommand = MBX_KILL_BOARD; @@ -1305,29 +1355,98 @@ lpfc_mbox_get(struct lpfc_hba * phba) } /** + * __lpfc_mbox_cmpl_put - Put mailbox cmd into mailbox cmd complete list + * @phba: pointer to lpfc hba data structure. + * @mbq: pointer to the driver internal queue element for mailbox command. + * + * This routine put the completed mailbox command into the mailbox command + * complete list. This is the unlocked version of the routine. The mailbox + * complete list is used by the driver worker thread to process mailbox + * complete callback functions outside the driver interrupt handler. + **/ +void +__lpfc_mbox_cmpl_put(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbq) +{ + list_add_tail(&mbq->list, &phba->sli.mboxq_cmpl); +} + +/** * lpfc_mbox_cmpl_put - Put mailbox command into mailbox command complete list * @phba: pointer to lpfc hba data structure. * @mbq: pointer to the driver internal queue element for mailbox command. * * This routine put the completed mailbox command into the mailbox command - * complete list. This routine is called from driver interrupt handler - * context.The mailbox complete list is used by the driver worker thread - * to process mailbox complete callback functions outside the driver interrupt - * handler. + * complete list. This is the locked version of the routine. The mailbox + * complete list is used by the driver worker thread to process mailbox + * complete callback functions outside the driver interrupt handler. **/ void -lpfc_mbox_cmpl_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq) +lpfc_mbox_cmpl_put(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbq) { unsigned long iflag; /* This function expects to be called from interrupt context */ spin_lock_irqsave(&phba->hbalock, iflag); - list_add_tail(&mbq->list, &phba->sli.mboxq_cmpl); + __lpfc_mbox_cmpl_put(phba, mbq); spin_unlock_irqrestore(&phba->hbalock, iflag); return; } /** + * lpfc_mbox_cmd_check - Check the validality of a mailbox command + * @phba: pointer to lpfc hba data structure. + * @mboxq: pointer to the driver internal queue element for mailbox command. + * + * This routine is to check whether a mailbox command is valid to be issued. + * This check will be performed by both the mailbox issue API when a client + * is to issue a mailbox command to the mailbox transport. + * + * Return 0 - pass the check, -ENODEV - fail the check + **/ +int +lpfc_mbox_cmd_check(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) +{ + /* Mailbox command that have a completion handler must also have a + * vport specified. + */ + if (mboxq->mbox_cmpl && mboxq->mbox_cmpl != lpfc_sli_def_mbox_cmpl && + mboxq->mbox_cmpl != lpfc_sli_wake_mbox_wait) { + if (!mboxq->vport) { + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_VPORT, + "1814 Mbox x%x failed, no vport\n", + mboxq->u.mb.mbxCommand); + dump_stack(); + return -ENODEV; + } + } + return 0; +} + +/** + * lpfc_mbox_dev_check - Check the device state for issuing a mailbox command + * @phba: pointer to lpfc hba data structure. + * + * This routine is to check whether the HBA device is ready for posting a + * mailbox command. It is used by the mailbox transport API at the time the + * to post a mailbox command to the device. + * + * Return 0 - pass the check, -ENODEV - fail the check + **/ +int +lpfc_mbox_dev_check(struct lpfc_hba *phba) +{ + /* If the PCI channel is in offline state, do not issue mbox */ + if (unlikely(pci_channel_offline(phba->pcidev))) + return -ENODEV; + + /* If the HBA is in error state, do not issue mbox */ + if (phba->link_state == LPFC_HBA_ERROR) + return -ENODEV; + + return 0; +} + +/** * lpfc_mbox_tmo_val - Retrieve mailbox command timeout value * @phba: pointer to lpfc hba data structure. * @cmd: mailbox command code. @@ -1350,6 +1469,475 @@ lpfc_mbox_tmo_val(struct lpfc_hba *phba, int cmd) case MBX_WRITE_WWN: /* 0x98 */ case MBX_LOAD_EXP_ROM: /* 0x9C */ return LPFC_MBOX_TMO_FLASH_CMD; + case MBX_SLI4_CONFIG: /* 0x9b */ + return LPFC_MBOX_SLI4_CONFIG_TMO; } return LPFC_MBOX_TMO; } + +/** + * lpfc_sli4_mbx_sge_set - Set a sge entry in non-embedded mailbox command + * @mbox: pointer to lpfc mbox command. + * @sgentry: sge entry index. + * @phyaddr: physical address for the sge + * @length: Length of the sge. + * + * This routine sets up an entry in the non-embedded mailbox command at the sge + * index location. + **/ +void +lpfc_sli4_mbx_sge_set(struct lpfcMboxq *mbox, uint32_t sgentry, + dma_addr_t phyaddr, uint32_t length) +{ + struct lpfc_mbx_nembed_cmd *nembed_sge; + + nembed_sge = (struct lpfc_mbx_nembed_cmd *) + &mbox->u.mqe.un.nembed_cmd; + nembed_sge->sge[sgentry].pa_lo = putPaddrLow(phyaddr); + nembed_sge->sge[sgentry].pa_hi = putPaddrHigh(phyaddr); + nembed_sge->sge[sgentry].length = length; +} + +/** + * lpfc_sli4_mbx_sge_get - Get a sge entry from non-embedded mailbox command + * @mbox: pointer to lpfc mbox command. + * @sgentry: sge entry index. + * + * This routine gets an entry from the non-embedded mailbox command at the sge + * index location. + **/ +void +lpfc_sli4_mbx_sge_get(struct lpfcMboxq *mbox, uint32_t sgentry, + struct lpfc_mbx_sge *sge) +{ + struct lpfc_mbx_nembed_cmd *nembed_sge; + + nembed_sge = (struct lpfc_mbx_nembed_cmd *) + &mbox->u.mqe.un.nembed_cmd; + sge->pa_lo = nembed_sge->sge[sgentry].pa_lo; + sge->pa_hi = nembed_sge->sge[sgentry].pa_hi; + sge->length = nembed_sge->sge[sgentry].length; +} + +/** + * lpfc_sli4_mbox_cmd_free - Free a sli4 mailbox command + * @phba: pointer to lpfc hba data structure. + * @mbox: pointer to lpfc mbox command. + * + * This routine frees SLI4 specific mailbox command for sending IOCTL command. + **/ +void +lpfc_sli4_mbox_cmd_free(struct lpfc_hba *phba, struct lpfcMboxq *mbox) +{ + struct lpfc_mbx_sli4_config *sli4_cfg; + struct lpfc_mbx_sge sge; + dma_addr_t phyaddr; + uint32_t sgecount, sgentry; + + sli4_cfg = &mbox->u.mqe.un.sli4_config; + + /* For embedded mbox command, just free the mbox command */ + if (bf_get(lpfc_mbox_hdr_emb, &sli4_cfg->header.cfg_mhdr)) { + mempool_free(mbox, phba->mbox_mem_pool); + return; + } + + /* For non-embedded mbox command, we need to free the pages first */ + sgecount = bf_get(lpfc_mbox_hdr_sge_cnt, &sli4_cfg->header.cfg_mhdr); + /* There is nothing we can do if there is no sge address array */ + if (unlikely(!mbox->sge_array)) { + mempool_free(mbox, phba->mbox_mem_pool); + return; + } + /* Each non-embedded DMA memory was allocated in the length of a page */ + for (sgentry = 0; sgentry < sgecount; sgentry++) { + lpfc_sli4_mbx_sge_get(mbox, sgentry, &sge); + phyaddr = getPaddr(sge.pa_hi, sge.pa_lo); + dma_free_coherent(&phba->pcidev->dev, PAGE_SIZE, + mbox->sge_array->addr[sgentry], phyaddr); + } + /* Free the sge address array memory */ + kfree(mbox->sge_array); + /* Finally, free the mailbox command itself */ + mempool_free(mbox, phba->mbox_mem_pool); +} + +/** + * lpfc_sli4_config - Initialize the SLI4 Config Mailbox command + * @phba: pointer to lpfc hba data structure. + * @mbox: pointer to lpfc mbox command. + * @subsystem: The sli4 config sub mailbox subsystem. + * @opcode: The sli4 config sub mailbox command opcode. + * @length: Length of the sli4 config mailbox command. + * + * This routine sets up the header fields of SLI4 specific mailbox command + * for sending IOCTL command. + * + * Return: the actual length of the mbox command allocated (mostly useful + * for none embedded mailbox command). + **/ +int +lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox, + uint8_t subsystem, uint8_t opcode, uint32_t length, bool emb) +{ + struct lpfc_mbx_sli4_config *sli4_config; + union lpfc_sli4_cfg_shdr *cfg_shdr = NULL; + uint32_t alloc_len; + uint32_t resid_len; + uint32_t pagen, pcount; + void *viraddr; + dma_addr_t phyaddr; + + /* Set up SLI4 mailbox command header fields */ + memset(mbox, 0, sizeof(*mbox)); + bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_SLI4_CONFIG); + + /* Set up SLI4 ioctl command header fields */ + sli4_config = &mbox->u.mqe.un.sli4_config; + + /* Setup for the embedded mbox command */ + if (emb) { + /* Set up main header fields */ + bf_set(lpfc_mbox_hdr_emb, &sli4_config->header.cfg_mhdr, 1); + sli4_config->header.cfg_mhdr.payload_length = + LPFC_MBX_CMD_HDR_LENGTH + length; + /* Set up sub-header fields following main header */ + bf_set(lpfc_mbox_hdr_opcode, + &sli4_config->header.cfg_shdr.request, opcode); + bf_set(lpfc_mbox_hdr_subsystem, + &sli4_config->header.cfg_shdr.request, subsystem); + sli4_config->header.cfg_shdr.request.request_length = length; + return length; + } + + /* Setup for the none-embedded mbox command */ + pcount = (PAGE_ALIGN(length))/PAGE_SIZE; + pcount = (pcount > LPFC_SLI4_MBX_SGE_MAX_PAGES) ? + LPFC_SLI4_MBX_SGE_MAX_PAGES : pcount; + /* Allocate record for keeping SGE virtual addresses */ + mbox->sge_array = kmalloc(sizeof(struct lpfc_mbx_nembed_sge_virt), + GFP_KERNEL); + if (!mbox->sge_array) + return 0; + + for (pagen = 0, alloc_len = 0; pagen < pcount; pagen++) { + /* The DMA memory is always allocated in the length of a + * page even though the last SGE might not fill up to a + * page, this is used as a priori size of PAGE_SIZE for + * the later DMA memory free. + */ + viraddr = dma_alloc_coherent(&phba->pcidev->dev, PAGE_SIZE, + &phyaddr, GFP_KERNEL); + /* In case of malloc fails, proceed with whatever we have */ + if (!viraddr) + break; + mbox->sge_array->addr[pagen] = viraddr; + /* Keep the first page for later sub-header construction */ + if (pagen == 0) + cfg_shdr = (union lpfc_sli4_cfg_shdr *)viraddr; + resid_len = length - alloc_len; + if (resid_len > PAGE_SIZE) { + lpfc_sli4_mbx_sge_set(mbox, pagen, phyaddr, + PAGE_SIZE); + alloc_len += PAGE_SIZE; + } else { + lpfc_sli4_mbx_sge_set(mbox, pagen, phyaddr, + resid_len); + alloc_len = length; + } + } + + /* Set up main header fields in mailbox command */ + sli4_config->header.cfg_mhdr.payload_length = alloc_len; + bf_set(lpfc_mbox_hdr_sge_cnt, &sli4_config->header.cfg_mhdr, pagen); + + /* Set up sub-header fields into the first page */ + if (pagen > 0) { + bf_set(lpfc_mbox_hdr_opcode, &cfg_shdr->request, opcode); + bf_set(lpfc_mbox_hdr_subsystem, &cfg_shdr->request, subsystem); + cfg_shdr->request.request_length = + alloc_len - sizeof(union lpfc_sli4_cfg_shdr); + } + /* The sub-header is in DMA memory, which needs endian converstion */ + lpfc_sli_pcimem_bcopy(cfg_shdr, cfg_shdr, + sizeof(union lpfc_sli4_cfg_shdr)); + + return alloc_len; +} + +/** + * lpfc_sli4_mbox_opcode_get - Get the opcode from a sli4 mailbox command + * @phba: pointer to lpfc hba data structure. + * @mbox: pointer to lpfc mbox command. + * + * This routine gets the opcode from a SLI4 specific mailbox command for + * sending IOCTL command. If the mailbox command is not MBX_SLI4_CONFIG + * (0x9B) or if the IOCTL sub-header is not present, opcode 0x0 shall be + * returned. + **/ +uint8_t +lpfc_sli4_mbox_opcode_get(struct lpfc_hba *phba, struct lpfcMboxq *mbox) +{ + struct lpfc_mbx_sli4_config *sli4_cfg; + union lpfc_sli4_cfg_shdr *cfg_shdr; + + if (mbox->u.mb.mbxCommand != MBX_SLI4_CONFIG) + return 0; + sli4_cfg = &mbox->u.mqe.un.sli4_config; + + /* For embedded mbox command, get opcode from embedded sub-header*/ + if (bf_get(lpfc_mbox_hdr_emb, &sli4_cfg->header.cfg_mhdr)) { + cfg_shdr = &mbox->u.mqe.un.sli4_config.header.cfg_shdr; + return bf_get(lpfc_mbox_hdr_opcode, &cfg_shdr->request); + } + + /* For non-embedded mbox command, get opcode from first dma page */ + if (unlikely(!mbox->sge_array)) + return 0; + cfg_shdr = (union lpfc_sli4_cfg_shdr *)mbox->sge_array->addr[0]; + return bf_get(lpfc_mbox_hdr_opcode, &cfg_shdr->request); +} + +/** + * lpfc_request_features: Configure SLI4 REQUEST_FEATURES mailbox + * @mboxq: pointer to lpfc mbox command. + * + * This routine sets up the mailbox for an SLI4 REQUEST_FEATURES + * mailbox command. + **/ +void +lpfc_request_features(struct lpfc_hba *phba, struct lpfcMboxq *mboxq) +{ + /* Set up SLI4 mailbox command header fields */ + memset(mboxq, 0, sizeof(LPFC_MBOXQ_t)); + bf_set(lpfc_mqe_command, &mboxq->u.mqe, MBX_SLI4_REQ_FTRS); + + /* Set up host requested features. */ + bf_set(lpfc_mbx_rq_ftr_rq_fcpi, &mboxq->u.mqe.un.req_ftrs, 1); + + /* Virtual fabrics and FIPs are not supported yet. */ + bf_set(lpfc_mbx_rq_ftr_rq_ifip, &mboxq->u.mqe.un.req_ftrs, 0); + + /* Enable DIF (block guard) only if configured to do so. */ + if (phba->cfg_enable_bg) + bf_set(lpfc_mbx_rq_ftr_rq_dif, &mboxq->u.mqe.un.req_ftrs, 1); + + /* Enable NPIV only if configured to do so. */ + if (phba->max_vpi && phba->cfg_enable_npiv) + bf_set(lpfc_mbx_rq_ftr_rq_npiv, &mboxq->u.mqe.un.req_ftrs, 1); + + return; +} + +/** + * lpfc_init_vfi - Initialize the INIT_VFI mailbox command + * @mbox: pointer to lpfc mbox command to initialize. + * @vport: Vport associated with the VF. + * + * This routine initializes @mbox to all zeros and then fills in the mailbox + * fields from @vport. INIT_VFI configures virtual fabrics identified by VFI + * in the context of an FCF. The driver issues this command to setup a VFI + * before issuing a FLOGI to login to the VSAN. The driver should also issue a + * REG_VFI after a successful VSAN login. + **/ +void +lpfc_init_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport) +{ + struct lpfc_mbx_init_vfi *init_vfi; + + memset(mbox, 0, sizeof(*mbox)); + init_vfi = &mbox->u.mqe.un.init_vfi; + bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_INIT_VFI); + bf_set(lpfc_init_vfi_vr, init_vfi, 1); + bf_set(lpfc_init_vfi_vt, init_vfi, 1); + bf_set(lpfc_init_vfi_vfi, init_vfi, vport->vfi + vport->phba->vfi_base); + bf_set(lpfc_init_vfi_fcfi, init_vfi, vport->phba->fcf.fcfi); +} + +/** + * lpfc_reg_vfi - Initialize the REG_VFI mailbox command + * @mbox: pointer to lpfc mbox command to initialize. + * @vport: vport associated with the VF. + * @phys: BDE DMA bus address used to send the service parameters to the HBA. + * + * This routine initializes @mbox to all zeros and then fills in the mailbox + * fields from @vport, and uses @buf as a DMAable buffer to send the vport's + * fc service parameters to the HBA for this VFI. REG_VFI configures virtual + * fabrics identified by VFI in the context of an FCF. + **/ +void +lpfc_reg_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport, dma_addr_t phys) +{ + struct lpfc_mbx_reg_vfi *reg_vfi; + + memset(mbox, 0, sizeof(*mbox)); + reg_vfi = &mbox->u.mqe.un.reg_vfi; + bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_REG_VFI); + bf_set(lpfc_reg_vfi_vp, reg_vfi, 1); + bf_set(lpfc_reg_vfi_vfi, reg_vfi, vport->vfi + vport->phba->vfi_base); + bf_set(lpfc_reg_vfi_fcfi, reg_vfi, vport->phba->fcf.fcfi); + bf_set(lpfc_reg_vfi_vpi, reg_vfi, vport->vpi + vport->phba->vpi_base); + reg_vfi->bde.addrHigh = putPaddrHigh(phys); + reg_vfi->bde.addrLow = putPaddrLow(phys); + reg_vfi->bde.tus.f.bdeSize = sizeof(vport->fc_sparam); + reg_vfi->bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64; + bf_set(lpfc_reg_vfi_nport_id, reg_vfi, vport->fc_myDID); +} + +/** + * lpfc_init_vpi - Initialize the INIT_VPI mailbox command + * @mbox: pointer to lpfc mbox command to initialize. + * @vpi: VPI to be initialized. + * + * The INIT_VPI mailbox command supports virtual N_Ports. The driver uses the + * command to activate a virtual N_Port. The HBA assigns a MAC address to use + * with the virtual N Port. The SLI Host issues this command before issuing a + * FDISC to connect to the Fabric. The SLI Host should issue a REG_VPI after a + * successful virtual NPort login. + **/ +void +lpfc_init_vpi(struct lpfcMboxq *mbox, uint16_t vpi) +{ + memset(mbox, 0, sizeof(*mbox)); + bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_INIT_VPI); + bf_set(lpfc_init_vpi_vpi, &mbox->u.mqe.un.init_vpi, vpi); +} + +/** + * lpfc_unreg_vfi - Initialize the UNREG_VFI mailbox command + * @mbox: pointer to lpfc mbox command to initialize. + * @vfi: VFI to be unregistered. + * + * The UNREG_VFI mailbox command causes the SLI Host to put a virtual fabric + * (logical NPort) into the inactive state. The SLI Host must have logged out + * and unregistered all remote N_Ports to abort any activity on the virtual + * fabric. The SLI Port posts the mailbox response after marking the virtual + * fabric inactive. + **/ +void +lpfc_unreg_vfi(struct lpfcMboxq *mbox, uint16_t vfi) +{ + memset(mbox, 0, sizeof(*mbox)); + bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_UNREG_VFI); + bf_set(lpfc_unreg_vfi_vfi, &mbox->u.mqe.un.unreg_vfi, vfi); +} + +/** + * lpfc_dump_fcoe_param - Dump config region 23 to get FCoe parameters. + * @phba: pointer to the hba structure containing. + * @mbox: pointer to lpfc mbox command to initialize. + * + * This function create a SLI4 dump mailbox command to dump FCoE + * parameters stored in region 23. + **/ +int +lpfc_dump_fcoe_param(struct lpfc_hba *phba, + struct lpfcMboxq *mbox) +{ + struct lpfc_dmabuf *mp = NULL; + MAILBOX_t *mb; + + memset(mbox, 0, sizeof(*mbox)); + mb = &mbox->u.mb; + + mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); + if (mp) + mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys); + + if (!mp || !mp->virt) { + kfree(mp); + /* dump_fcoe_param failed to allocate memory */ + lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX, + "2569 lpfc_dump_fcoe_param: memory" + " allocation failed \n"); + return 1; + } + + memset(mp->virt, 0, LPFC_BPL_SIZE); + INIT_LIST_HEAD(&mp->list); + + /* save address for completion */ + mbox->context1 = (uint8_t *) mp; + + mb->mbxCommand = MBX_DUMP_MEMORY; + mb->un.varDmp.type = DMP_NV_PARAMS; + mb->un.varDmp.region_id = DMP_REGION_FCOEPARAM; + mb->un.varDmp.sli4_length = DMP_FCOEPARAM_RGN_SIZE; + mb->un.varWords[3] = putPaddrLow(mp->phys); + mb->un.varWords[4] = putPaddrHigh(mp->phys); + return 0; +} + +/** + * lpfc_reg_fcfi - Initialize the REG_FCFI mailbox command + * @phba: pointer to the hba structure containing the FCF index and RQ ID. + * @mbox: pointer to lpfc mbox command to initialize. + * + * The REG_FCFI mailbox command supports Fibre Channel Forwarders (FCFs). The + * SLI Host uses the command to activate an FCF after it has acquired FCF + * information via a READ_FCF mailbox command. This mailbox command also is used + * to indicate where received unsolicited frames from this FCF will be sent. By + * default this routine will set up the FCF to forward all unsolicited frames + * the the RQ ID passed in the @phba. This can be overridden by the caller for + * more complicated setups. + **/ +void +lpfc_reg_fcfi(struct lpfc_hba *phba, struct lpfcMboxq *mbox) +{ + struct lpfc_mbx_reg_fcfi *reg_fcfi; + + memset(mbox, 0, sizeof(*mbox)); + reg_fcfi = &mbox->u.mqe.un.reg_fcfi; + bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_REG_FCFI); + bf_set(lpfc_reg_fcfi_rq_id0, reg_fcfi, phba->sli4_hba.hdr_rq->queue_id); + bf_set(lpfc_reg_fcfi_rq_id1, reg_fcfi, REG_FCF_INVALID_QID); + bf_set(lpfc_reg_fcfi_rq_id2, reg_fcfi, REG_FCF_INVALID_QID); + bf_set(lpfc_reg_fcfi_rq_id3, reg_fcfi, REG_FCF_INVALID_QID); + bf_set(lpfc_reg_fcfi_info_index, reg_fcfi, phba->fcf.fcf_indx); + /* reg_fcf addr mode is bit wise inverted value of fcf addr_mode */ + bf_set(lpfc_reg_fcfi_mam, reg_fcfi, + (~phba->fcf.addr_mode) & 0x3); + if (phba->fcf.fcf_flag & FCF_VALID_VLAN) { + bf_set(lpfc_reg_fcfi_vv, reg_fcfi, 1); + bf_set(lpfc_reg_fcfi_vlan_tag, reg_fcfi, phba->fcf.vlan_id); + } +} + +/** + * lpfc_unreg_fcfi - Initialize the UNREG_FCFI mailbox command + * @mbox: pointer to lpfc mbox command to initialize. + * @fcfi: FCFI to be unregistered. + * + * The UNREG_FCFI mailbox command supports Fibre Channel Forwarders (FCFs). + * The SLI Host uses the command to inactivate an FCFI. + **/ +void +lpfc_unreg_fcfi(struct lpfcMboxq *mbox, uint16_t fcfi) +{ + memset(mbox, 0, sizeof(*mbox)); + bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_UNREG_FCFI); + bf_set(lpfc_unreg_fcfi, &mbox->u.mqe.un.unreg_fcfi, fcfi); +} + +/** + * lpfc_resume_rpi - Initialize the RESUME_RPI mailbox command + * @mbox: pointer to lpfc mbox command to initialize. + * @ndlp: The nodelist structure that describes the RPI to resume. + * + * The RESUME_RPI mailbox command is used to restart I/O to an RPI after a + * link event. + **/ +void +lpfc_resume_rpi(struct lpfcMboxq *mbox, struct lpfc_nodelist *ndlp) +{ + struct lpfc_mbx_resume_rpi *resume_rpi; + + memset(mbox, 0, sizeof(*mbox)); + resume_rpi = &mbox->u.mqe.un.resume_rpi; + bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_RESUME_RPI); + bf_set(lpfc_resume_rpi_rpi, resume_rpi, ndlp->nlp_rpi); + bf_set(lpfc_resume_rpi_vpi, resume_rpi, + ndlp->vport->vpi + ndlp->vport->phba->vpi_base); + bf_set(lpfc_resume_rpi_vfi, resume_rpi, + ndlp->vport->vfi + ndlp->vport->phba->vfi_base); +} |