12 files changed, 463 insertions, 104 deletions

diff --git a/drivers/scsi/lpfc/Makefile b/drivers/scsi/lpfc/Makefile
index fe5d396aca7..e2516ba8ebf 100644
--- a/drivers/scsi/lpfc/Makefile
+++ b/drivers/scsi/lpfc/Makefile
@@ -22,7 +22,9 @@
 ccflags-$(GCOV) := -fprofile-arcs -ftest-coverage
 ccflags-$(GCOV) += -O0
 
+ifdef WARNINGS_BECOME_ERRORS
 ccflags-y += -Werror
+endif
 
 obj-$(CONFIG_SCSI_LPFC) := lpfc.o
 
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index e5da6da20f8..a65c05a8d48 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -96,6 +96,10 @@ struct lpfc_sli2_slim;
 /* queue dump line buffer size */
 #define LPFC_LBUF_SZ		128
 
+/* mailbox system shutdown options */
+#define LPFC_MBX_NO_WAIT	0
+#define LPFC_MBX_WAIT		1
+
 enum lpfc_polling_flags {
 	ENABLE_FCP_RING_POLLING = 0x1,
 	DISABLE_FCP_RING_INT    = 0x2
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 5eb2bc11618..adef5bb2100 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -3617,6 +3617,91 @@ lpfc_sriov_nr_virtfn_init(struct lpfc_hba *phba, int val)
 static DEVICE_ATTR(lpfc_sriov_nr_virtfn, S_IRUGO | S_IWUSR,
 		   lpfc_sriov_nr_virtfn_show, lpfc_sriov_nr_virtfn_store);
 
+/**
+ * lpfc_fcp_imax_store
+ *
+ * @dev: class device that is converted into a Scsi_host.
+ * @attr: device attribute, not used.
+ * @buf: string with the number of fast-path FCP interrupts per second.
+ * @count: unused variable.
+ *
+ * Description:
+ * If val is in a valid range [636,651042], then set the adapter's
+ * maximum number of fast-path FCP interrupts per second.
+ *
+ * Returns:
+ * length of the buf on success if val is in range the intended mode
+ * is supported.
+ * -EINVAL if val out of range or intended mode is not supported.
+ **/
+static ssize_t
+lpfc_fcp_imax_store(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
+	struct lpfc_hba *phba = vport->phba;
+	int val = 0, i;
+
+	/* Sanity check on user data */
+	if (!isdigit(buf[0]))
+		return -EINVAL;
+	if (sscanf(buf, "%i", &val) != 1)
+		return -EINVAL;
+
+	/* Value range is [636,651042] */
+	if (val < LPFC_MIM_IMAX || val > LPFC_DMULT_CONST)
+		return -EINVAL;
+
+	phba->cfg_fcp_imax = (uint32_t)val;
+	for (i = 0; i < phba->cfg_fcp_eq_count; i += LPFC_MAX_EQ_DELAY)
+		lpfc_modify_fcp_eq_delay(phba, i);
+
+	return strlen(buf);
+}
+
+/*
+# lpfc_fcp_imax: The maximum number of fast-path FCP interrupts per second
+#
+# Value range is [636,651042]. Default value is 10000.
+*/
+static int lpfc_fcp_imax = LPFC_FP_DEF_IMAX;
+module_param(lpfc_fcp_imax, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(lpfc_fcp_imax,
+	    "Set the maximum number of fast-path FCP interrupts per second");
+lpfc_param_show(fcp_imax)
+
+/**
+ * lpfc_fcp_imax_init - Set the initial sr-iov virtual function enable
+ * @phba: lpfc_hba pointer.
+ * @val: link speed value.
+ *
+ * Description:
+ * If val is in a valid range [636,651042], then initialize the adapter's
+ * maximum number of fast-path FCP interrupts per second.
+ *
+ * Returns:
+ * zero if val saved.
+ * -EINVAL val out of range
+ **/
+static int
+lpfc_fcp_imax_init(struct lpfc_hba *phba, int val)
+{
+	if (val >= LPFC_MIM_IMAX && val <= LPFC_DMULT_CONST) {
+		phba->cfg_fcp_imax = val;
+		return 0;
+	}
+
+	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"3016 fcp_imax: %d out of range, using default\n", val);
+	phba->cfg_fcp_imax = LPFC_FP_DEF_IMAX;
+
+	return 0;
+}
+
+static DEVICE_ATTR(lpfc_fcp_imax, S_IRUGO | S_IWUSR,
+		   lpfc_fcp_imax_show, lpfc_fcp_imax_store);
+
 /*
 # lpfc_fcp_class:  Determines FC class to use for the FCP protocol.
 # Value range is [2,3]. Default value is 3.
@@ -3758,14 +3843,6 @@ LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or "
 	    "MSI-X (2), if possible");
 
 /*
-# lpfc_fcp_imax: Set the maximum number of fast-path FCP interrupts per second
-#
-# Value range is [636,651042]. Default value is 10000.
-*/
-LPFC_ATTR_R(fcp_imax, LPFC_FP_DEF_IMAX, LPFC_MIM_IMAX, LPFC_DMULT_CONST,
-	    "Set the maximum number of fast-path FCP interrupts per second");
-
-/*
 # lpfc_fcp_wq_count: Set the number of fast-path FCP work queues
 #
 # Value range is [1,31]. Default value is 4.
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 9b2a16f3bc7..8a2a514a255 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -183,7 +183,7 @@ int lpfc_post_buffer(struct lpfc_hba *, struct lpfc_sli_ring *, int);
 void lpfc_decode_firmware_rev(struct lpfc_hba *, char *, int);
 int lpfc_online(struct lpfc_hba *);
 void lpfc_unblock_mgmt_io(struct lpfc_hba *);
-void lpfc_offline_prep(struct lpfc_hba *);
+void lpfc_offline_prep(struct lpfc_hba *, int);
 void lpfc_offline(struct lpfc_hba *);
 void lpfc_reset_hba(struct lpfc_hba *);
 
@@ -273,7 +273,7 @@ int lpfc_sli_host_down(struct lpfc_vport *);
 int lpfc_sli_hba_down(struct lpfc_hba *);
 int lpfc_sli_issue_mbox(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
 int lpfc_sli_handle_mb_event(struct lpfc_hba *);
-void lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *);
+void lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *, int);
 int lpfc_sli_check_eratt(struct lpfc_hba *);
 void lpfc_sli_handle_slow_ring_event(struct lpfc_hba *,
 				    struct lpfc_sli_ring *, uint32_t);
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.h b/drivers/scsi/lpfc/lpfc_debugfs.h
index 616c400dae1..afe368fd1b9 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.h
+++ b/drivers/scsi/lpfc/lpfc_debugfs.h
@@ -395,8 +395,13 @@ lpfc_debug_dump_fcp_cq(struct lpfc_hba *phba, int fcp_wqidx)
 	for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++)
 		if (phba->sli4_hba.fcp_cq[fcp_cqidx]->queue_id == fcp_cqid)
 			break;
-	if (fcp_cqidx >= phba->cfg_fcp_eq_count)
-		return;
+	if (phba->intr_type == MSIX) {
+		if (fcp_cqidx >= phba->cfg_fcp_eq_count)
+			return;
+	} else {
+		if (fcp_cqidx > 0)
+			return;
+	}
 
 	printk(KERN_ERR "FCP CQ: WQ[Idx:%d|Qid%d]->CQ[Idx%d|Qid%d]:\n",
 		fcp_wqidx, phba->sli4_hba.fcp_wq[fcp_wqidx]->queue_id,
@@ -426,8 +431,13 @@ lpfc_debug_dump_fcp_eq(struct lpfc_hba *phba, int fcp_wqidx)
 	for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++)
 		if (phba->sli4_hba.fcp_cq[fcp_cqidx]->queue_id == fcp_cqid)
 			break;
-	if (fcp_cqidx >= phba->cfg_fcp_eq_count)
-		return;
+	if (phba->intr_type == MSIX) {
+		if (fcp_cqidx >= phba->cfg_fcp_eq_count)
+			return;
+	} else {
+		if (fcp_cqidx > 0)
+			return;
+	}
 
 	if (phba->cfg_fcp_eq_count == 0) {
 		fcp_eqidx = -1;
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 5bb269e224f..9b4f92941dc 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -530,7 +530,7 @@ lpfc_work_list_done(struct lpfc_hba *phba)
 			break;
 		case LPFC_EVT_OFFLINE_PREP:
 			if (phba->link_state >= LPFC_LINK_DOWN)
-				lpfc_offline_prep(phba);
+				lpfc_offline_prep(phba, LPFC_MBX_WAIT);
 			*(int *)(evtp->evt_arg1) = 0;
 			complete((struct completion *)(evtp->evt_arg2));
 			break;
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index f1946dfda5b..953603a7a43 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -874,6 +874,7 @@ struct mbox_header {
 #define LPFC_MBOX_OPCODE_MQ_CREATE			0x15
 #define LPFC_MBOX_OPCODE_GET_CNTL_ATTRIBUTES		0x20
 #define LPFC_MBOX_OPCODE_NOP				0x21
+#define LPFC_MBOX_OPCODE_MODIFY_EQ_DELAY		0x29
 #define LPFC_MBOX_OPCODE_MQ_DESTROY			0x35
 #define LPFC_MBOX_OPCODE_CQ_DESTROY			0x36
 #define LPFC_MBOX_OPCODE_EQ_DESTROY			0x37
@@ -940,6 +941,13 @@ struct eq_context {
 	uint32_t reserved3;
 };
 
+struct eq_delay_info {
+	uint32_t eq_id;
+	uint32_t phase;
+	uint32_t delay_multi;
+};
+#define	LPFC_MAX_EQ_DELAY	8
+
 struct sgl_page_pairs {
 	uint32_t sgl_pg0_addr_lo;
 	uint32_t sgl_pg0_addr_hi;
@@ -1002,6 +1010,19 @@ struct lpfc_mbx_eq_create {
 	} u;
 };
 
+struct lpfc_mbx_modify_eq_delay {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t num_eq;
+			struct eq_delay_info eq[LPFC_MAX_EQ_DELAY];
+		} request;
+		struct {
+			uint32_t word0;
+		} response;
+	} u;
+};
+
 struct lpfc_mbx_eq_destroy {
 	struct mbox_header header;
 	union {
@@ -2875,6 +2896,7 @@ struct lpfc_mqe {
 		struct lpfc_mbx_mq_create mq_create;
 		struct lpfc_mbx_mq_create_ext mq_create_ext;
 		struct lpfc_mbx_eq_create eq_create;
+		struct lpfc_mbx_modify_eq_delay eq_delay;
 		struct lpfc_mbx_cq_create cq_create;
 		struct lpfc_mbx_wq_create wq_create;
 		struct lpfc_mbx_rq_create rq_create;
@@ -3084,6 +3106,28 @@ struct lpfc_acqe_fc_la {
 #define LPFC_FC_LA_EVENT_TYPE_SHARED_LINK	0x2
 };
 
+struct lpfc_acqe_misconfigured_event {
+	struct {
+	uint32_t word0;
+#define lpfc_sli_misconfigured_port0_SHIFT	0
+#define lpfc_sli_misconfigured_port0_MASK	0x000000FF
+#define lpfc_sli_misconfigured_port0_WORD	word0
+#define lpfc_sli_misconfigured_port1_SHIFT	8
+#define lpfc_sli_misconfigured_port1_MASK	0x000000FF
+#define lpfc_sli_misconfigured_port1_WORD	word0
+#define lpfc_sli_misconfigured_port2_SHIFT	16
+#define lpfc_sli_misconfigured_port2_MASK	0x000000FF
+#define lpfc_sli_misconfigured_port2_WORD	word0
+#define lpfc_sli_misconfigured_port3_SHIFT	24
+#define lpfc_sli_misconfigured_port3_MASK	0x000000FF
+#define lpfc_sli_misconfigured_port3_WORD	word0
+	} theEvent;
+#define LPFC_SLI_EVENT_STATUS_VALID			0x00
+#define LPFC_SLI_EVENT_STATUS_NOT_PRESENT	0x01
+#define LPFC_SLI_EVENT_STATUS_WRONG_TYPE	0x02
+#define LPFC_SLI_EVENT_STATUS_UNSUPPORTED	0x03
+};
+
 struct lpfc_acqe_sli {
 	uint32_t event_data1;
 	uint32_t event_data2;
@@ -3094,6 +3138,7 @@ struct lpfc_acqe_sli {
 #define LPFC_SLI_EVENT_TYPE_NORM_TEMP		0x3
 #define LPFC_SLI_EVENT_TYPE_NVLOG_POST		0x4
 #define LPFC_SLI_EVENT_TYPE_DIAG_DUMP		0x5
+#define LPFC_SLI_EVENT_TYPE_MISCONFIGURED	0x9
 };
 
 /*
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 411ed48d79d..45c15208be9 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -73,6 +73,8 @@ static int lpfc_hba_down_post_s4(struct lpfc_hba *phba);
 static int lpfc_sli4_cq_event_pool_create(struct lpfc_hba *);
 static void lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *);
 static void lpfc_sli4_cq_event_release_all(struct lpfc_hba *);
+static void lpfc_sli4_disable_intr(struct lpfc_hba *);
+static uint32_t lpfc_sli4_enable_intr(struct lpfc_hba *, uint32_t);
 
 static struct scsi_transport_template *lpfc_transport_template = NULL;
 static struct scsi_transport_template *lpfc_vport_transport_template = NULL;
@@ -1169,7 +1171,7 @@ lpfc_offline_eratt(struct lpfc_hba *phba)
 	spin_lock_irq(&phba->hbalock);
 	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
 	spin_unlock_irq(&phba->hbalock);
-	lpfc_offline_prep(phba);
+	lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT);
 
 	lpfc_offline(phba);
 	lpfc_reset_barrier(phba);
@@ -1193,7 +1195,7 @@ lpfc_offline_eratt(struct lpfc_hba *phba)
 static void
 lpfc_sli4_offline_eratt(struct lpfc_hba *phba)
 {
-	lpfc_offline_prep(phba);
+	lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT);
 	lpfc_offline(phba);
 	lpfc_sli4_brdreset(phba);
 	lpfc_hba_down_post(phba);
@@ -1251,7 +1253,7 @@ lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
 	 * There was a firmware error. Take the hba offline and then
 	 * attempt to restart it.
 	 */
-	lpfc_offline_prep(phba);
+	lpfc_offline_prep(phba, LPFC_MBX_WAIT);
 	lpfc_offline(phba);
 
 	/* Wait for the ER1 bit to clear.*/
@@ -1372,7 +1374,7 @@ lpfc_handle_eratt_s3(struct lpfc_hba *phba)
 		 * There was a firmware error.  Take the hba offline and then
 		 * attempt to restart it.
 		 */
-		lpfc_offline_prep(phba);
+		lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT);
 		lpfc_offline(phba);
 		lpfc_sli_brdrestart(phba);
 		if (lpfc_online(phba) == 0) {	/* Initialize the HBA */
@@ -1428,6 +1430,54 @@ lpfc_handle_eratt_s3(struct lpfc_hba *phba)
 }
 
 /**
+ * lpfc_sli4_port_sta_fn_reset - The SLI4 function reset due to port status reg
+ * @phba: pointer to lpfc hba data structure.
+ * @mbx_action: flag for mailbox shutdown action.
+ *
+ * This routine is invoked to perform an SLI4 port PCI function reset in
+ * response to port status register polling attention. It waits for port
+ * status register (ERR, RDY, RN) bits before proceeding with function reset.
+ * During this process, interrupt vectors are freed and later requested
+ * for handling possible port resource change.
+ **/
+static int
+lpfc_sli4_port_sta_fn_reset(struct lpfc_hba *phba, int mbx_action)
+{
+	int rc;
+	uint32_t intr_mode;
+
+	/*
+	 * On error status condition, driver need to wait for port
+	 * ready before performing reset.
+	 */
+	rc = lpfc_sli4_pdev_status_reg_wait(phba);
+	if (!rc) {
+		/* need reset: attempt for port recovery */
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2887 Reset Needed: Attempting Port "
+				"Recovery...\n");
+		lpfc_offline_prep(phba, mbx_action);
+		lpfc_offline(phba);
+		/* release interrupt for possible resource change */
+		lpfc_sli4_disable_intr(phba);
+		lpfc_sli_brdrestart(phba);
+		/* request and enable interrupt */
+		intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode);
+		if (intr_mode == LPFC_INTR_ERROR) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"3175 Failed to enable interrupt\n");
+			return -EIO;
+		} else {
+			phba->intr_mode = intr_mode;
+		}
+		rc = lpfc_online(phba);
+		if (rc == 0)
+			lpfc_unblock_mgmt_io(phba);
+	}
+	return rc;
+}
+
+/**
  * lpfc_handle_eratt_s4 - The SLI4 HBA hardware error handler
  * @phba: pointer to lpfc hba data structure.
  *
@@ -1506,30 +1556,18 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
 			 reg_err2 == SLIPORT_ERR2_REG_FUNC_PROVISON)
 			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 					"3145 Port Down: Provisioning\n");
-		/*
-		 * On error status condition, driver need to wait for port
-		 * ready before performing reset.
-		 */
-		rc = lpfc_sli4_pdev_status_reg_wait(phba);
-		if (!rc) {
-			/* need reset: attempt for port recovery */
-			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-					"2887 Reset Needed: Attempting Port "
-					"Recovery...\n");
-			lpfc_offline_prep(phba);
-			lpfc_offline(phba);
-			lpfc_sli_brdrestart(phba);
-			if (lpfc_online(phba) == 0) {
-				lpfc_unblock_mgmt_io(phba);
-				/* don't report event on forced debug dump */
-				if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 &&
-				    reg_err2 == SLIPORT_ERR2_REG_FORCED_DUMP)
-					return;
-				else
-					break;
-			}
-			/* fall through for not able to recover */
+
+		/* Check port status register for function reset */
+		rc = lpfc_sli4_port_sta_fn_reset(phba, LPFC_MBX_NO_WAIT);
+		if (rc == 0) {
+			/* don't report event on forced debug dump */
+			if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 &&
+			    reg_err2 == SLIPORT_ERR2_REG_FORCED_DUMP)
+				return;
+			else
+				break;
 		}
+		/* fall through for not able to recover */
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"3152 Unrecoverable error, bring the port "
 				"offline\n");
@@ -2494,15 +2532,19 @@ lpfc_stop_hba_timers(struct lpfc_hba *phba)
  * driver prepares the HBA interface for online or offline.
  **/
 static void
-lpfc_block_mgmt_io(struct lpfc_hba * phba)
+lpfc_block_mgmt_io(struct lpfc_hba *phba, int mbx_action)
 {
 	unsigned long iflag;
 	uint8_t actcmd = MBX_HEARTBEAT;
 	unsigned long timeout;
 
-	timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies;
 	spin_lock_irqsave(&phba->hbalock, iflag);
 	phba->sli.sli_flag |= LPFC_BLOCK_MGMT_IO;
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+	if (mbx_action == LPFC_MBX_NO_WAIT)
+		return;
+	timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies;
+	spin_lock_irqsave(&phba->hbalock, iflag);
 	if (phba->sli.mbox_active) {
 		actcmd = phba->sli.mbox_active->u.mb.mbxCommand;
 		/* Determine how long we might wait for the active mailbox
@@ -2592,7 +2634,7 @@ lpfc_online(struct lpfc_hba *phba)
 	lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
 			"0458 Bring Adapter online\n");
 
-	lpfc_block_mgmt_io(phba);
+	lpfc_block_mgmt_io(phba, LPFC_MBX_WAIT);
 
 	if (!lpfc_sli_queue_setup(phba)) {
 		lpfc_unblock_mgmt_io(phba);
@@ -2660,7 +2702,7 @@ lpfc_unblock_mgmt_io(struct lpfc_hba * phba)
  * queue to make it ready to be brought offline.
  **/
 void
-lpfc_offline_prep(struct lpfc_hba * phba)
+lpfc_offline_prep(struct lpfc_hba *phba, int mbx_action)
 {
 	struct lpfc_vport *vport = phba->pport;
 	struct lpfc_nodelist  *ndlp, *next_ndlp;
@@ -2671,7 +2713,7 @@ lpfc_offline_prep(struct lpfc_hba * phba)
 	if (vport->fc_flag & FC_OFFLINE_MODE)
 		return;
 
-	lpfc_block_mgmt_io(phba);
+	lpfc_block_mgmt_io(phba, mbx_action);
 
 	lpfc_linkdown(phba);
 
@@ -2718,7 +2760,7 @@ lpfc_offline_prep(struct lpfc_hba * phba)
 	}
 	lpfc_destroy_vport_work_array(phba, vports);
 
-	lpfc_sli_mbox_sys_shutdown(phba);
+	lpfc_sli_mbox_sys_shutdown(phba, mbx_action);
 }
 
 /**
@@ -3684,12 +3726,76 @@ out_free_pmb:
 static void
 lpfc_sli4_async_sli_evt(struct lpfc_hba *phba, struct lpfc_acqe_sli *acqe_sli)
 {
-	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
-			"2901 Async SLI event - Event Data1:x%08x Event Data2:"
-			"x%08x SLI Event Type:%d",
-			acqe_sli->event_data1, acqe_sli->event_data2,
-			bf_get(lpfc_trailer_type, acqe_sli));
-	return;
+	char port_name;
+	char message[80];
+	uint8_t status;
+	struct lpfc_acqe_misconfigured_event *misconfigured;
+
+	/* special case misconfigured event as it contains data for all ports */
+	if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+		 LPFC_SLI_INTF_IF_TYPE_2) ||
+		(bf_get(lpfc_trailer_type, acqe_sli) !=
+			LPFC_SLI_EVENT_TYPE_MISCONFIGURED)) {
+		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"2901 Async SLI event - Event Data1:x%08x Event Data2:"
+				"x%08x SLI Event Type:%d\n",
+				acqe_sli->event_data1, acqe_sli->event_data2,
+				bf_get(lpfc_trailer_type, acqe_sli));
+		return;
+	}
+
+	port_name = phba->Port[0];
+	if (port_name == 0x00)
+		port_name = '?'; /* get port name is empty */
+
+	misconfigured = (struct lpfc_acqe_misconfigured_event *)
+					&acqe_sli->event_data1;
+
+	/* fetch the status for this port */
+	switch (phba->sli4_hba.lnk_info.lnk_no) {
+	case LPFC_LINK_NUMBER_0:
+		status = bf_get(lpfc_sli_misconfigured_port0,
+					&misconfigured->theEvent);
+		break;
+	case LPFC_LINK_NUMBER_1:
+		status = bf_get(lpfc_sli_misconfigured_port1,
+					&misconfigured->theEvent);
+		break;
+	case LPFC_LINK_NUMBER_2:
+		status = bf_get(lpfc_sli_misconfigured_port2,
+					&misconfigured->theEvent);
+		break;
+	case LPFC_LINK_NUMBER_3:
+		status = bf_get(lpfc_sli_misconfigured_port3,
+					&misconfigured->theEvent);
+		break;
+	default:
+		status = ~LPFC_SLI_EVENT_STATUS_VALID;
+		break;
+	}
+
+	switch (status) {
+	case LPFC_SLI_EVENT_STATUS_VALID:
+		return; /* no message if the sfp is okay */
+	case LPFC_SLI_EVENT_STATUS_NOT_PRESENT:
+		sprintf(message, "Not installed");
+		break;
+	case LPFC_SLI_EVENT_STATUS_WRONG_TYPE:
+		sprintf(message,
+			"Optics of two types installed");
+		break;
+	case LPFC_SLI_EVENT_STATUS_UNSUPPORTED:
+		sprintf(message, "Incompatible optics");
+		break;
+	default:
+		/* firmware is reporting a status we don't know about */
+		sprintf(message, "Unknown event status x%02x", status);
+		break;
+	}
+
+	lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"3176 Misconfigured Physical Port - "
+			"Port Name %c %s\n", port_name, message);
 }
 
 /**
@@ -4312,7 +4418,7 @@ lpfc_reset_hba(struct lpfc_hba *phba)
 		phba->link_state = LPFC_HBA_ERROR;
 		return;
 	}
-	lpfc_offline_prep(phba);
+	lpfc_offline_prep(phba, LPFC_MBX_WAIT);
 	lpfc_offline(phba);
 	lpfc_sli_brdrestart(phba);
 	lpfc_online(phba);
@@ -5514,14 +5620,45 @@ lpfc_destroy_shost(struct lpfc_hba *phba)
 static void
 lpfc_setup_bg(struct lpfc_hba *phba, struct Scsi_Host *shost)
 {
+	uint32_t old_mask;
+	uint32_t old_guard;
+
 	int pagecnt = 10;
 	if (lpfc_prot_mask && lpfc_prot_guard) {
 		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
 				"1478 Registering BlockGuard with the "
 				"SCSI layer\n");
-		scsi_host_set_prot(shost, lpfc_prot_mask);
-		scsi_host_set_guard(shost, lpfc_prot_guard);
+
+		old_mask = lpfc_prot_mask;
+		old_guard = lpfc_prot_guard;
+
+		/* Only allow supported values */
+		lpfc_prot_mask &= (SHOST_DIF_TYPE1_PROTECTION |
+			SHOST_DIX_TYPE0_PROTECTION |
+			SHOST_DIX_TYPE1_PROTECTION);
+		lpfc_prot_guard &= (SHOST_DIX_GUARD_IP | SHOST_DIX_GUARD_CRC);
+
+		/* DIF Type 1 protection for profiles AST1/C1 is end to end */
+		if (lpfc_prot_mask == SHOST_DIX_TYPE1_PROTECTION)
+			lpfc_prot_mask |= SHOST_DIF_TYPE1_PROTECTION;
+
+		if (lpfc_prot_mask && lpfc_prot_guard) {
+			if ((old_mask != lpfc_prot_mask) ||
+				(old_guard != lpfc_prot_guard))
+				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"1475 Registering BlockGuard with the "
+					"SCSI layer: mask %d  guard %d\n",
+					lpfc_prot_mask, lpfc_prot_guard);
+
+			scsi_host_set_prot(shost, lpfc_prot_mask);
+			scsi_host_set_guard(shost, lpfc_prot_guard);
+		} else
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1479 Not Registering BlockGuard with the SCSI "
+				"layer, Bad protection parameters: %d %d\n",
+				old_mask, old_guard);
 	}
+
 	if (!_dump_buf_data) {
 		while (pagecnt) {
 			spin_lock_init(&_dump_buf_lock);
@@ -8859,7 +8996,7 @@ lpfc_pci_suspend_one_s3(struct pci_dev *pdev, pm_message_t msg)
 			"0473 PCI device Power Management suspend.\n");
 
 	/* Bring down the device */
-	lpfc_offline_prep(phba);
+	lpfc_offline_prep(phba, LPFC_MBX_WAIT);
 	lpfc_offline(phba);
 	kthread_stop(phba->worker_thread);
 
@@ -8985,7 +9122,7 @@ lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba)
 			"2710 PCI channel disable preparing for reset\n");
 
 	/* Block any management I/Os to the device */
-	lpfc_block_mgmt_io(phba);
+	lpfc_block_mgmt_io(phba, LPFC_MBX_WAIT);
 
 	/* Block all SCSI devices' I/Os on the host */
 	lpfc_scsi_dev_block(phba);
@@ -9129,7 +9266,7 @@ lpfc_io_slot_reset_s3(struct pci_dev *pdev)
 		phba->intr_mode = intr_mode;
 
 	/* Take device offline, it will perform cleanup */
-	lpfc_offline_prep(phba);
+	lpfc_offline_prep(phba, LPFC_MBX_WAIT);
 	lpfc_offline(phba);
 	lpfc_sli_brdrestart(phba);
 
@@ -9603,7 +9740,7 @@ lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg)
 			"2843 PCI device Power Management suspend.\n");
 
 	/* Bring down the device */
-	lpfc_offline_prep(phba);
+	lpfc_offline_prep(phba, LPFC_MBX_WAIT);
 	lpfc_offline(phba);
 	kthread_stop(phba->worker_thread);
 
@@ -9729,7 +9866,7 @@ lpfc_sli4_prep_dev_for_reset(struct lpfc_hba *phba)
 			"2826 PCI channel disable preparing for reset\n");
 
 	/* Block any management I/Os to the device */
-	lpfc_block_mgmt_io(phba);
+	lpfc_block_mgmt_io(phba, LPFC_MBX_NO_WAIT);
 
 	/* Block all SCSI devices' I/Os on the host */
 	lpfc_scsi_dev_block(phba);
@@ -9902,7 +10039,7 @@ lpfc_io_resume_s4(struct pci_dev *pdev)
 	 */
 	if (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE)) {
 		/* Perform device reset */
-		lpfc_offline_prep(phba);
+		lpfc_offline_prep(phba, LPFC_MBX_WAIT);
 		lpfc_offline(phba);
 		lpfc_sli_brdrestart(phba);
 		/* Bring the device back online */
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 66e09069f28..925975d2d76 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -4275,10 +4275,8 @@ lpfc_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 	 * Catch race where our node has transitioned, but the
 	 * transport is still transitioning.
 	 */
-	if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
-		cmnd->result = ScsiResult(DID_IMM_RETRY, 0);
-		goto out_fail_command;
-	}
+	if (!ndlp || !NLP_CHK_NODE_ACT(ndlp))
+		goto out_tgt_busy;
 	if (atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth)
 		goto out_tgt_busy;
 
@@ -4412,12 +4410,12 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 	struct lpfc_iocbq *abtsiocb;
 	struct lpfc_scsi_buf *lpfc_cmd;
 	IOCB_t *cmd, *icmd;
-	int ret = SUCCESS;
+	int ret = SUCCESS, status = 0;
 	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waitq);
 
-	ret = fc_block_scsi_eh(cmnd);
-	if (ret)
-		return ret;
+	status = fc_block_scsi_eh(cmnd);
+	if (status)
+		return status;
 
 	spin_lock_irq(&phba->hbalock);
 	/* driver queued commands are in process of being flushed */
@@ -4435,7 +4433,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 		lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
 			 "2873 SCSI Layer I/O Abort Request IO CMPL Status "
 			 "x%x ID %d LUN %d\n",
-			 ret, cmnd->device->id, cmnd->device->lun);
+			 SUCCESS, cmnd->device->id, cmnd->device->lun);
 		return SUCCESS;
 	}
 
@@ -4762,7 +4760,7 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
 	unsigned tgt_id = cmnd->device->id;
 	unsigned int lun_id = cmnd->device->lun;
 	struct lpfc_scsi_event_header scsi_event;
-	int status;
+	int status, ret = SUCCESS;
 
 	if (!rdata) {
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
@@ -4803,9 +4801,9 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
 	 * So, continue on.
 	 * We will report success if all the i/o aborts successfully.
 	 */
-	status = lpfc_reset_flush_io_context(vport, tgt_id, lun_id,
+	ret = lpfc_reset_flush_io_context(vport, tgt_id, lun_id,
 						LPFC_CTX_LUN);
-	return status;
+	return ret;
 }
 
 /**
@@ -4829,7 +4827,7 @@ lpfc_target_reset_handler(struct scsi_cmnd *cmnd)
 	unsigned tgt_id = cmnd->device->id;
 	unsigned int lun_id = cmnd->device->lun;
 	struct lpfc_scsi_event_header scsi_event;
-	int status;
+	int status, ret = SUCCESS;
 
 	if (!rdata) {
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
@@ -4870,9 +4868,9 @@ lpfc_target_reset_handler(struct scsi_cmnd *cmnd)
 	 * So, continue on.
 	 * We will report success if all the i/o aborts successfully.
 	 */
-	status = lpfc_reset_flush_io_context(vport, tgt_id, lun_id,
-					LPFC_CTX_TGT);
-	return status;
+	ret = lpfc_reset_flush_io_context(vport, tgt_id, lun_id,
+					  LPFC_CTX_TGT);
+	return ret;
 }
 
 /**
@@ -4982,7 +4980,7 @@ lpfc_host_reset_handler(struct scsi_cmnd *cmnd)
 	struct lpfc_hba *phba = vport->phba;
 	int rc, ret = SUCCESS;
 
-	lpfc_offline_prep(phba);
+	lpfc_offline_prep(phba, LPFC_MBX_WAIT);
 	lpfc_offline(phba);
 	rc = lpfc_sli_brdrestart(phba);
 	if (rc)
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index b4720a10981..9cbd20b1328 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -8984,7 +8984,7 @@ lpfc_sli_hba_down(struct lpfc_hba *phba)
 	int i;
 
 	/* Shutdown the mailbox command sub-system */
-	lpfc_sli_mbox_sys_shutdown(phba);
+	lpfc_sli_mbox_sys_shutdown(phba, LPFC_MBX_WAIT);
 
 	lpfc_hba_down_prep(phba);
 
@@ -9996,11 +9996,17 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq,
  * sub-system flush routine to gracefully bring down mailbox sub-system.
  **/
 void
-lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba)
+lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba, int mbx_action)
 {
 	struct lpfc_sli *psli = &phba->sli;
 	unsigned long timeout;
 
+	if (mbx_action == LPFC_MBX_NO_WAIT) {
+		/* delay 100ms for port state */
+		msleep(100);
+		lpfc_sli_mbox_sys_flush(phba);
+		return;
+	}
 	timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies;
 
 	spin_lock_irq(&phba->hbalock);
@@ -12042,6 +12048,83 @@ out_fail:
 }
 
 /**
+ * lpfc_modify_fcp_eq_delay - Modify Delay Multiplier on FCP EQs
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @startq: The starting FCP EQ to modify
+ *
+ * This function sends an MODIFY_EQ_DELAY mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @startq
+ * is used to get the starting FCP EQ to change.
+ * This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return -ENOMEM. If the queue create mailbox command
+ * fails this function will return -ENXIO.
+ **/
+uint32_t
+lpfc_modify_fcp_eq_delay(struct lpfc_hba *phba, uint16_t startq)
+{
+	struct lpfc_mbx_modify_eq_delay *eq_delay;
+	LPFC_MBOXQ_t *mbox;
+	struct lpfc_queue *eq;
+	int cnt, rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	int fcp_eqidx;
+	union lpfc_sli4_cfg_shdr *shdr;
+	uint16_t dmult;
+
+	if (startq >= phba->cfg_fcp_eq_count)
+		return 0;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_modify_eq_delay) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_MODIFY_EQ_DELAY,
+			 length, LPFC_SLI4_MBX_EMBED);
+	eq_delay = &mbox->u.mqe.un.eq_delay;
+
+	/* Calculate delay multiper from maximum interrupt per second */
+	dmult = LPFC_DMULT_CONST/phba->cfg_fcp_imax - 1;
+
+	cnt = 0;
+	for (fcp_eqidx = startq; fcp_eqidx < phba->cfg_fcp_eq_count;
+	    fcp_eqidx++) {
+		eq = phba->sli4_hba.fp_eq[fcp_eqidx];
+		if (!eq)
+			continue;
+		eq_delay->u.request.eq[cnt].eq_id = eq->queue_id;
+		eq_delay->u.request.eq[cnt].phase = 0;
+		eq_delay->u.request.eq[cnt].delay_multi = dmult;
+		cnt++;
+		if (cnt >= LPFC_MAX_EQ_DELAY)
+			break;
+	}
+	eq_delay->u.request.num_eq = cnt;
+
+	mbox->vport = phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	mbox->context1 = NULL;
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	shdr = (union lpfc_sli4_cfg_shdr *) &eq_delay->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2512 MODIFY_EQ_DELAY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+	mempool_free(mbox, phba->mbox_mem_pool);
+	return status;
+}
+
+/**
  * lpfc_eq_create - Create an Event Queue on the HBA
  * @phba: HBA structure that indicates port to create a queue on.
  * @eq: The queue structure to use to create the event queue.
@@ -12228,8 +12311,10 @@ lpfc_cq_create(struct lpfc_hba *phba, struct lpfc_queue *cq,
 		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 				"0361 Unsupported CQ count. (%d)\n",
 				cq->entry_count);
-		if (cq->entry_count < 256)
-			return -EINVAL;
+		if (cq->entry_count < 256) {
+			status = -EINVAL;
+			goto out;
+		}
 		/* otherwise default to smallest count (drop through) */
 	case 256:
 		bf_set(lpfc_cq_context_count, &cq_create->u.request.context,
@@ -12420,8 +12505,10 @@ lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq,
 		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 				"0362 Unsupported MQ count. (%d)\n",
 				mq->entry_count);
-		if (mq->entry_count < 16)
-			return -EINVAL;
+		if (mq->entry_count < 16) {
+			status = -EINVAL;
+			goto out;
+		}
 		/* otherwise default to smallest count (drop through) */
 	case 16:
 		bf_set(lpfc_mq_context_ring_size,
@@ -12710,8 +12797,10 @@ lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq,
 			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 					"2535 Unsupported RQ count. (%d)\n",
 					hrq->entry_count);
-			if (hrq->entry_count < 512)
-				return -EINVAL;
+			if (hrq->entry_count < 512) {
+				status = -EINVAL;
+				goto out;
+			}
 			/* otherwise default to smallest count (drop through) */
 		case 512:
 			bf_set(lpfc_rq_context_rqe_count,
@@ -12791,8 +12880,10 @@ lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq,
 			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 					"2536 Unsupported RQ count. (%d)\n",
 					drq->entry_count);
-			if (drq->entry_count < 512)
-				return -EINVAL;
+			if (drq->entry_count < 512) {
+				status = -EINVAL;
+				goto out;
+			}
 			/* otherwise default to smallest count (drop through) */
 		case 512:
 			bf_set(lpfc_rq_context_rqe_count,
@@ -15855,24 +15946,18 @@ lpfc_drain_txq(struct lpfc_hba *phba)
 		spin_lock_irqsave(&phba->hbalock, iflags);
 
 		piocbq = lpfc_sli_ringtx_get(phba, pring);
+		if (!piocbq) {
+			spin_unlock_irqrestore(&phba->hbalock, iflags);
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2823 txq empty and txq_cnt is %d\n ",
+				pring->txq_cnt);
+			break;
+		}
 		sglq = __lpfc_sli_get_sglq(phba, piocbq);
 		if (!sglq) {
 			__lpfc_sli_ringtx_put(phba, pring, piocbq);
 			spin_unlock_irqrestore(&phba->hbalock, iflags);
 			break;
-		} else {
-			if (!piocbq) {
-				/* The txq_cnt out of sync. This should
-				 * never happen
-				 */
-				sglq = __lpfc_clear_active_sglq(phba,
-						 sglq->sli4_lxritag);
-				spin_unlock_irqrestore(&phba->hbalock, iflags);
-				lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
-					"2823 txq empty and txq_cnt is %d\n ",
-					pring->txq_cnt);
-				break;
-			}
 		}
 
 		/* The xri and iocb resources secured,
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index a4a77080091..ec756118c5c 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -598,6 +598,7 @@ struct lpfc_queue *lpfc_sli4_queue_alloc(struct lpfc_hba *, uint32_t,
 			uint32_t);
 void lpfc_sli4_queue_free(struct lpfc_queue *);
 uint32_t lpfc_eq_create(struct lpfc_hba *, struct lpfc_queue *, uint16_t);
+uint32_t lpfc_modify_fcp_eq_delay(struct lpfc_hba *, uint16_t);
 uint32_t lpfc_cq_create(struct lpfc_hba *, struct lpfc_queue *,
 			struct lpfc_queue *, uint32_t, uint32_t);
 int32_t lpfc_mq_create(struct lpfc_hba *, struct lpfc_queue *,
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 59c57a40998..4704e5b5088 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "8.3.31"
+#define LPFC_DRIVER_VERSION "8.3.32"
 #define LPFC_DRIVER_NAME		"lpfc"
 #define LPFC_SP_DRIVER_HANDLER_NAME	"lpfc:sp"
 #define LPFC_FP_DRIVER_HANDLER_NAME	"lpfc:fp"