diff options
Diffstat (limited to 'drivers/scsi/megaraid/megaraid_sas.c')
-rw-r--r-- | drivers/scsi/megaraid/megaraid_sas.c | 2799 |
1 files changed, 2799 insertions, 0 deletions
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c new file mode 100644 index 00000000000..3c32e69afcd --- /dev/null +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -0,0 +1,2799 @@ +/* + * + * Linux MegaRAID driver for SAS based RAID controllers + * + * Copyright (c) 2003-2005 LSI Logic Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * FILE : megaraid_sas.c + * Version : v00.00.02.00-rc4 + * + * Authors: + * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com> + * Sumant Patro <Sumant.Patro@lsil.com> + * + * List of supported controllers + * + * OEM Product Name VID DID SSVID SSID + * --- ------------ --- --- ---- ---- + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/list.h> +#include <linux/moduleparam.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/uio.h> +#include <asm/uaccess.h> +#include <linux/fs.h> +#include <linux/compat.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include "megaraid_sas.h" + +MODULE_LICENSE("GPL"); +MODULE_VERSION(MEGASAS_VERSION); +MODULE_AUTHOR("sreenivas.bagalkote@lsil.com"); +MODULE_DESCRIPTION("LSI Logic MegaRAID SAS Driver"); + +/* + * PCI ID table for all supported controllers + */ +static struct pci_device_id megasas_pci_table[] = { + + { + PCI_VENDOR_ID_LSI_LOGIC, + PCI_DEVICE_ID_LSI_SAS1064R, + PCI_ANY_ID, + PCI_ANY_ID, + }, + { + PCI_VENDOR_ID_DELL, + PCI_DEVICE_ID_DELL_PERC5, + PCI_ANY_ID, + PCI_ANY_ID, + }, + {0} /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(pci, megasas_pci_table); + +static int megasas_mgmt_majorno; +static struct megasas_mgmt_info megasas_mgmt_info; +static struct fasync_struct *megasas_async_queue; +static DECLARE_MUTEX(megasas_async_queue_mutex); + +/** + * megasas_get_cmd - Get a command from the free pool + * @instance: Adapter soft state + * + * Returns a free command from the pool + */ +static inline struct megasas_cmd *megasas_get_cmd(struct megasas_instance + *instance) +{ + unsigned long flags; + struct megasas_cmd *cmd = NULL; + + spin_lock_irqsave(&instance->cmd_pool_lock, flags); + + if (!list_empty(&instance->cmd_pool)) { + cmd = list_entry((&instance->cmd_pool)->next, + struct megasas_cmd, list); + list_del_init(&cmd->list); + } else { + printk(KERN_ERR "megasas: Command pool empty!\n"); + } + + spin_unlock_irqrestore(&instance->cmd_pool_lock, flags); + return cmd; +} + +/** + * megasas_return_cmd - Return a cmd to free command pool + * @instance: Adapter soft state + * @cmd: Command packet to be returned to free command pool + */ +static inline void +megasas_return_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd) +{ + unsigned long flags; + + spin_lock_irqsave(&instance->cmd_pool_lock, flags); + + cmd->scmd = NULL; + list_add_tail(&cmd->list, &instance->cmd_pool); + + spin_unlock_irqrestore(&instance->cmd_pool_lock, flags); +} + +/** + * megasas_enable_intr - Enables interrupts + * @regs: MFI register set + */ +static inline void +megasas_enable_intr(struct megasas_register_set __iomem * regs) +{ + writel(1, &(regs)->outbound_intr_mask); + + /* Dummy readl to force pci flush */ + readl(®s->outbound_intr_mask); +} + +/** + * megasas_disable_intr - Disables interrupts + * @regs: MFI register set + */ +static inline void +megasas_disable_intr(struct megasas_register_set __iomem * regs) +{ + u32 mask = readl(®s->outbound_intr_mask) & (~0x00000001); + writel(mask, ®s->outbound_intr_mask); + + /* Dummy readl to force pci flush */ + readl(®s->outbound_intr_mask); +} + +/** + * megasas_issue_polled - Issues a polling command + * @instance: Adapter soft state + * @cmd: Command packet to be issued + * + * For polling, MFI requires the cmd_status to be set to 0xFF before posting. + */ +static int +megasas_issue_polled(struct megasas_instance *instance, struct megasas_cmd *cmd) +{ + int i; + u32 msecs = MFI_POLL_TIMEOUT_SECS * 1000; + + struct megasas_header *frame_hdr = &cmd->frame->hdr; + + frame_hdr->cmd_status = 0xFF; + frame_hdr->flags |= MFI_FRAME_DONT_POST_IN_REPLY_QUEUE; + + /* + * Issue the frame using inbound queue port + */ + writel(cmd->frame_phys_addr >> 3, + &instance->reg_set->inbound_queue_port); + + /* + * Wait for cmd_status to change + */ + for (i = 0; (i < msecs) && (frame_hdr->cmd_status == 0xff); i++) { + rmb(); + msleep(1); + } + + if (frame_hdr->cmd_status == 0xff) + return -ETIME; + + return 0; +} + +/** + * megasas_issue_blocked_cmd - Synchronous wrapper around regular FW cmds + * @instance: Adapter soft state + * @cmd: Command to be issued + * + * This function waits on an event for the command to be returned from ISR. + * Used to issue ioctl commands. + */ +static int +megasas_issue_blocked_cmd(struct megasas_instance *instance, + struct megasas_cmd *cmd) +{ + cmd->cmd_status = ENODATA; + + writel(cmd->frame_phys_addr >> 3, + &instance->reg_set->inbound_queue_port); + + wait_event(instance->int_cmd_wait_q, (cmd->cmd_status != ENODATA)); + + return 0; +} + +/** + * megasas_issue_blocked_abort_cmd - Aborts previously issued cmd + * @instance: Adapter soft state + * @cmd_to_abort: Previously issued cmd to be aborted + * + * MFI firmware can abort previously issued AEN comamnd (automatic event + * notification). The megasas_issue_blocked_abort_cmd() issues such abort + * cmd and blocks till it is completed. + */ +static int +megasas_issue_blocked_abort_cmd(struct megasas_instance *instance, + struct megasas_cmd *cmd_to_abort) +{ + struct megasas_cmd *cmd; + struct megasas_abort_frame *abort_fr; + + cmd = megasas_get_cmd(instance); + + if (!cmd) + return -1; + + abort_fr = &cmd->frame->abort; + + /* + * Prepare and issue the abort frame + */ + abort_fr->cmd = MFI_CMD_ABORT; + abort_fr->cmd_status = 0xFF; + abort_fr->flags = 0; + abort_fr->abort_context = cmd_to_abort->index; + abort_fr->abort_mfi_phys_addr_lo = cmd_to_abort->frame_phys_addr; + abort_fr->abort_mfi_phys_addr_hi = 0; + + cmd->sync_cmd = 1; + cmd->cmd_status = 0xFF; + + writel(cmd->frame_phys_addr >> 3, + &instance->reg_set->inbound_queue_port); + + /* + * Wait for this cmd to complete + */ + wait_event(instance->abort_cmd_wait_q, (cmd->cmd_status != 0xFF)); + + megasas_return_cmd(instance, cmd); + return 0; +} + +/** + * megasas_make_sgl32 - Prepares 32-bit SGL + * @instance: Adapter soft state + * @scp: SCSI command from the mid-layer + * @mfi_sgl: SGL to be filled in + * + * If successful, this function returns the number of SG elements. Otherwise, + * it returnes -1. + */ +static inline int +megasas_make_sgl32(struct megasas_instance *instance, struct scsi_cmnd *scp, + union megasas_sgl *mfi_sgl) +{ + int i; + int sge_count; + struct scatterlist *os_sgl; + + /* + * Return 0 if there is no data transfer + */ + if (!scp->request_buffer || !scp->request_bufflen) + return 0; + + if (!scp->use_sg) { + mfi_sgl->sge32[0].phys_addr = pci_map_single(instance->pdev, + scp-> + request_buffer, + scp-> + request_bufflen, + scp-> + sc_data_direction); + mfi_sgl->sge32[0].length = scp->request_bufflen; + + return 1; + } + + os_sgl = (struct scatterlist *)scp->request_buffer; + sge_count = pci_map_sg(instance->pdev, os_sgl, scp->use_sg, + scp->sc_data_direction); + + for (i = 0; i < sge_count; i++, os_sgl++) { + mfi_sgl->sge32[i].length = sg_dma_len(os_sgl); + mfi_sgl->sge32[i].phys_addr = sg_dma_address(os_sgl); + } + + return sge_count; +} + +/** + * megasas_make_sgl64 - Prepares 64-bit SGL + * @instance: Adapter soft state + * @scp: SCSI command from the mid-layer + * @mfi_sgl: SGL to be filled in + * + * If successful, this function returns the number of SG elements. Otherwise, + * it returnes -1. + */ +static inline int +megasas_make_sgl64(struct megasas_instance *instance, struct scsi_cmnd *scp, + union megasas_sgl *mfi_sgl) +{ + int i; + int sge_count; + struct scatterlist *os_sgl; + + /* + * Return 0 if there is no data transfer + */ + if (!scp->request_buffer || !scp->request_bufflen) + return 0; + + if (!scp->use_sg) { + mfi_sgl->sge64[0].phys_addr = pci_map_single(instance->pdev, + scp-> + request_buffer, + scp-> + request_bufflen, + scp-> + sc_data_direction); + + mfi_sgl->sge64[0].length = scp->request_bufflen; + + return 1; + } + + os_sgl = (struct scatterlist *)scp->request_buffer; + sge_count = pci_map_sg(instance->pdev, os_sgl, scp->use_sg, + scp->sc_data_direction); + + for (i = 0; i < sge_count; i++, os_sgl++) { + mfi_sgl->sge64[i].length = sg_dma_len(os_sgl); + mfi_sgl->sge64[i].phys_addr = sg_dma_address(os_sgl); + } + + return sge_count; +} + +/** + * megasas_build_dcdb - Prepares a direct cdb (DCDB) command + * @instance: Adapter soft state + * @scp: SCSI command + * @cmd: Command to be prepared in + * + * This function prepares CDB commands. These are typcially pass-through + * commands to the devices. + */ +static inline int +megasas_build_dcdb(struct megasas_instance *instance, struct scsi_cmnd *scp, + struct megasas_cmd *cmd) +{ + u32 sge_sz; + int sge_bytes; + u32 is_logical; + u32 device_id; + u16 flags = 0; + struct megasas_pthru_frame *pthru; + + is_logical = MEGASAS_IS_LOGICAL(scp); + device_id = MEGASAS_DEV_INDEX(instance, scp); + pthru = (struct megasas_pthru_frame *)cmd->frame; + + if (scp->sc_data_direction == PCI_DMA_TODEVICE) + flags = MFI_FRAME_DIR_WRITE; + else if (scp->sc_data_direction == PCI_DMA_FROMDEVICE) + flags = MFI_FRAME_DIR_READ; + else if (scp->sc_data_direction == PCI_DMA_NONE) + flags = MFI_FRAME_DIR_NONE; + + /* + * Prepare the DCDB frame + */ + pthru->cmd = (is_logical) ? MFI_CMD_LD_SCSI_IO : MFI_CMD_PD_SCSI_IO; + pthru->cmd_status = 0x0; + pthru->scsi_status = 0x0; + pthru->target_id = device_id; + pthru->lun = scp->device->lun; + pthru->cdb_len = scp->cmd_len; + pthru->timeout = 0; + pthru->flags = flags; + pthru->data_xfer_len = scp->request_bufflen; + + memcpy(pthru->cdb, scp->cmnd, scp->cmd_len); + + /* + * Construct SGL + */ + sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) : + sizeof(struct megasas_sge32); + + if (IS_DMA64) { + pthru->flags |= MFI_FRAME_SGL64; + pthru->sge_count = megasas_make_sgl64(instance, scp, + &pthru->sgl); + } else + pthru->sge_count = megasas_make_sgl32(instance, scp, + &pthru->sgl); + + /* + * Sense info specific + */ + pthru->sense_len = SCSI_SENSE_BUFFERSIZE; + pthru->sense_buf_phys_addr_hi = 0; + pthru->sense_buf_phys_addr_lo = cmd->sense_phys_addr; + + sge_bytes = sge_sz * pthru->sge_count; + + /* + * Compute the total number of frames this command consumes. FW uses + * this number to pull sufficient number of frames from host memory. + */ + cmd->frame_count = (sge_bytes / MEGAMFI_FRAME_SIZE) + + ((sge_bytes % MEGAMFI_FRAME_SIZE) ? 1 : 0) + 1; + + if (cmd->frame_count > 7) + cmd->frame_count = 8; + + return cmd->frame_count; +} + +/** + * megasas_build_ldio - Prepares IOs to logical devices + * @instance: Adapter soft state + * @scp: SCSI command + * @cmd: Command to to be prepared + * + * Frames (and accompanying SGLs) for regular SCSI IOs use this function. + */ +static inline int +megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp, + struct megasas_cmd *cmd) +{ + u32 sge_sz; + int sge_bytes; + u32 device_id; + u8 sc = scp->cmnd[0]; + u16 flags = 0; + struct megasas_io_frame *ldio; + + device_id = MEGASAS_DEV_INDEX(instance, scp); + ldio = (struct megasas_io_frame *)cmd->frame; + + if (scp->sc_data_direction == PCI_DMA_TODEVICE) + flags = MFI_FRAME_DIR_WRITE; + else if (scp->sc_data_direction == PCI_DMA_FROMDEVICE) + flags = MFI_FRAME_DIR_READ; + + /* + * Preare the Logical IO frame: 2nd bit is zero for all read cmds + */ + ldio->cmd = (sc & 0x02) ? MFI_CMD_LD_WRITE : MFI_CMD_LD_READ; + ldio->cmd_status = 0x0; + ldio->scsi_status = 0x0; + ldio->target_id = device_id; + ldio->timeout = 0; + ldio->reserved_0 = 0; + ldio->pad_0 = 0; + ldio->flags = flags; + ldio->start_lba_hi = 0; + ldio->access_byte = (scp->cmd_len != 6) ? scp->cmnd[1] : 0; + + /* + * 6-byte READ(0x08) or WRITE(0x0A) cdb + */ + if (scp->cmd_len == 6) { + ldio->lba_count = (u32) scp->cmnd[4]; + ldio->start_lba_lo = ((u32) scp->cmnd[1] << 16) | + ((u32) scp->cmnd[2] << 8) | (u32) scp->cmnd[3]; + + ldio->start_lba_lo &= 0x1FFFFF; + } + + /* + * 10-byte READ(0x28) or WRITE(0x2A) cdb + */ + else if (scp->cmd_len == 10) { + ldio->lba_count = (u32) scp->cmnd[8] | + ((u32) scp->cmnd[7] << 8); + ldio->start_lba_lo = ((u32) scp->cmnd[2] << 24) | + ((u32) scp->cmnd[3] << 16) | + ((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5]; + } + + /* + * 12-byte READ(0xA8) or WRITE(0xAA) cdb + */ + else if (scp->cmd_len == 12) { + ldio->lba_count = ((u32) scp->cmnd[6] << 24) | + ((u32) scp->cmnd[7] << 16) | + ((u32) scp->cmnd[8] << 8) | (u32) scp->cmnd[9]; + + ldio->start_lba_lo = ((u32) scp->cmnd[2] << 24) | + ((u32) scp->cmnd[3] << 16) | + ((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5]; + } + + /* + * 16-byte READ(0x88) or WRITE(0x8A) cdb + */ + else if (scp->cmd_len == 16) { + ldio->lba_count = ((u32) scp->cmnd[10] << 24) | + ((u32) scp->cmnd[11] << 16) | + ((u32) scp->cmnd[12] << 8) | (u32) scp->cmnd[13]; + + ldio->start_lba_lo = ((u32) scp->cmnd[6] << 24) | + ((u32) scp->cmnd[7] << 16) | + ((u32) scp->cmnd[8] << 8) | (u32) scp->cmnd[9]; + + ldio->start_lba_hi = ((u32) scp->cmnd[2] << 24) | + ((u32) scp->cmnd[3] << 16) | + ((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5]; + + } + + /* + * Construct SGL + */ + sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) : + sizeof(struct megasas_sge32); + + if (IS_DMA64) { + ldio->flags |= MFI_FRAME_SGL64; + ldio->sge_count = megasas_make_sgl64(instance, scp, &ldio->sgl); + } else + ldio->sge_count = megasas_make_sgl32(instance, scp, &ldio->sgl); + + /* + * Sense info specific + */ + ldio->sense_len = SCSI_SENSE_BUFFERSIZE; + ldio->sense_buf_phys_addr_hi = 0; + ldio->sense_buf_phys_addr_lo = cmd->sense_phys_addr; + + sge_bytes = sge_sz * ldio->sge_count; + + cmd->frame_count = (sge_bytes / MEGAMFI_FRAME_SIZE) + + ((sge_bytes % MEGAMFI_FRAME_SIZE) ? 1 : 0) + 1; + + if (cmd->frame_count > 7) + cmd->frame_count = 8; + + return cmd->frame_count; +} + +/** + * megasas_build_cmd - Prepares a command packet + * @instance: Adapter soft state + * @scp: SCSI command + * @frame_count: [OUT] Number of frames used to prepare this command + */ +static inline struct megasas_cmd *megasas_build_cmd(struct megasas_instance + *instance, + struct scsi_cmnd *scp, + int *frame_count) +{ + u32 logical_cmd; + struct megasas_cmd *cmd; + + /* + * Find out if this is logical or physical drive command. + */ + logical_cmd = MEGASAS_IS_LOGICAL(scp); + + /* + * Logical drive command + */ + if (logical_cmd) { + + if (scp->device->id >= MEGASAS_MAX_LD) { + scp->result = DID_BAD_TARGET << 16; + return NULL; + } + + switch (scp->cmnd[0]) { + + case READ_10: + case WRITE_10: + case READ_12: + case WRITE_12: + case READ_6: + case WRITE_6: + case READ_16: + case WRITE_16: + /* + * Fail for LUN > 0 + */ + if (scp->device->lun) { + scp->result = DID_BAD_TARGET << 16; + return NULL; + } + + cmd = megasas_get_cmd(instance); + + if (!cmd) { + scp->result = DID_IMM_RETRY << 16; + return NULL; + } + + *frame_count = megasas_build_ldio(instance, scp, cmd); + + if (!(*frame_count)) { + megasas_return_cmd(instance, cmd); + return NULL; + } + + return cmd; + + default: + /* + * Fail for LUN > 0 + */ + if (scp->device->lun) { + scp->result = DID_BAD_TARGET << 16; + return NULL; + } + + cmd = megasas_get_cmd(instance); + + if (!cmd) { + scp->result = DID_IMM_RETRY << 16; + return NULL; + } + + *frame_count = megasas_build_dcdb(instance, scp, cmd); + + if (!(*frame_count)) { + megasas_return_cmd(instance, cmd); + return NULL; + } + + return cmd; + } + } else { + cmd = megasas_get_cmd(instance); + + if (!cmd) { + scp->result = DID_IMM_RETRY << 16; + return NULL; + } + + *frame_count = megasas_build_dcdb(instance, scp, cmd); + + if (!(*frame_count)) { + megasas_return_cmd(instance, cmd); + return NULL; + } + + return cmd; + } + + return NULL; +} + +/** + * megasas_queue_command - Queue entry point + * @scmd: SCSI command to be queued + * @done: Callback entry point + */ +static int +megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *)) +{ + u32 frame_count; + unsigned long flags; + struct megasas_cmd *cmd; + struct megasas_instance *instance; + + instance = (struct megasas_instance *) + scmd->device->host->hostdata; + scmd->scsi_done = done; + scmd->result = 0; + + cmd = megasas_build_cmd(instance, scmd, &frame_count); + + if (!cmd) { + done(scmd); + return 0; + } + + cmd->scmd = scmd; + scmd->SCp.ptr = (char *)cmd; + scmd->SCp.sent_command = jiffies; + + /* + * Issue the command to the FW + */ + spin_lock_irqsave(&instance->instance_lock, flags); + instance->fw_outstanding++; + spin_unlock_irqrestore(&instance->instance_lock, flags); + + writel(((cmd->frame_phys_addr >> 3) | (cmd->frame_count - 1)), + &instance->reg_set->inbound_queue_port); + + return 0; +} + +/** + * megasas_wait_for_outstanding - Wait for all outstanding cmds + * @instance: Adapter soft state + * + * This function waits for upto MEGASAS_RESET_WAIT_TIME seconds for FW to + * complete all its outstanding commands. Returns error if one or more IOs + * are pending after this time period. It also marks the controller dead. + */ +static int megasas_wait_for_outstanding(struct megasas_instance *instance) +{ + int i; + u32 wait_time = MEGASAS_RESET_WAIT_TIME; + + for (i = 0; i < wait_time; i++) { + + if (!instance->fw_outstanding) + break; + + if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) { + printk(KERN_NOTICE "megasas: [%2d]waiting for %d " + "commands to complete\n", i, + instance->fw_outstanding); + } + + msleep(1000); + } + + if (instance->fw_outstanding) { + instance->hw_crit_error = 1; + return FAILED; + } + + return SUCCESS; +} + +/** + * megasas_generic_reset - Generic reset routine + * @scmd: Mid-layer SCSI command + * + * This routine implements a generic reset handler for device, bus and host + * reset requests. Device, bus and host specific reset handlers can use this + * function after they do their specific tasks. + */ +static int megasas_generic_reset(struct scsi_cmnd *scmd) +{ + int ret_val; + struct megasas_instance *instance; + + instance = (struct megasas_instance *)scmd->device->host->hostdata; + + scmd_printk(KERN_NOTICE, scmd, "megasas: RESET -%ld cmd=%x\n", + scmd->serial_number, scmd->cmnd[0]); + + if (instance->hw_crit_error) { + printk(KERN_ERR "megasas: cannot recover from previous reset " + "failures\n"); + return FAILED; + } + + ret_val = megasas_wait_for_outstanding(instance); + if (ret_val == SUCCESS) + printk(KERN_NOTICE "megasas: reset successful \n"); + else + printk(KERN_ERR "megasas: failed to do reset\n"); + + return ret_val; +} + +static enum scsi_eh_timer_return megasas_reset_timer(struct scsi_cmnd *scmd) +{ + unsigned long seconds; + + if (scmd->SCp.ptr) { + seconds = (jiffies - scmd->SCp.sent_command) / HZ; + + if (seconds < 90) { + return EH_RESET_TIMER; + } else { + return EH_NOT_HANDLED; + } + } + + return EH_HANDLED; +} + +/** + * megasas_reset_device - Device reset handler entry point + */ +static int megasas_reset_device(struct scsi_cmnd *scmd) +{ + int ret; + + /* + * First wait for all commands to complete + */ + ret = megasas_generic_reset(scmd); + + return ret; +} + +/** + * megasas_reset_bus_host - Bus & host reset handler entry point + */ +static int megasas_reset_bus_host(struct scsi_cmnd *scmd) +{ + int ret; + + /* + * Frist wait for all commands to complete + */ + ret = megasas_generic_reset(scmd); + + return ret; +} + +/** + * megasas_service_aen - Processes an event notification + * @instance: Adapter soft state + * @cmd: AEN command completed by the ISR + * + * For AEN, driver sends a command down to FW that is held by the FW till an + * event occurs. When an event of interest occurs, FW completes the command + * that it was previously holding. + * + * This routines sends SIGIO signal to processes that have registered with the + * driver for AEN. + */ +static void +megasas_service_aen(struct megasas_instance *instance, struct megasas_cmd *cmd) +{ + /* + * Don't signal app if it is just an aborted previously registered aen + */ + if (!cmd->abort_aen) + kill_fasync(&megasas_async_queue, SIGIO, POLL_IN); + else + cmd->abort_aen = 0; + + instance->aen_cmd = NULL; + megasas_return_cmd(instance, cmd); +} + +/* + * Scsi host template for megaraid_sas driver + */ +static struct scsi_host_template megasas_template = { + + .module = THIS_MODULE, + .name = "LSI Logic SAS based MegaRAID driver", + .proc_name = "megaraid_sas", + .queuecommand = megasas_queue_command, + .eh_device_reset_handler = megasas_reset_device, + .eh_bus_reset_handler = megasas_reset_bus_host, + .eh_host_reset_handler = megasas_reset_bus_host, + .eh_timed_out = megasas_reset_timer, + .use_clustering = ENABLE_CLUSTERING, +}; + +/** + * megasas_complete_int_cmd - Completes an internal command + * @instance: Adapter soft state + * @cmd: Command to be completed + * + * The megasas_issue_blocked_cmd() function waits for a command to complete + * after it issues a command. This function wakes up that waiting routine by + * calling wake_up() on the wait queue. + */ +static void +megasas_complete_int_cmd(struct megasas_instance *instance, + struct megasas_cmd *cmd) +{ + cmd->cmd_status = cmd->frame->io.cmd_status; + + if (cmd->cmd_status == ENODATA) { + cmd->cmd_status = 0; + } + wake_up(&instance->int_cmd_wait_q); +} + +/** + * megasas_complete_abort - Completes aborting a command + * @instance: Adapter soft state + * @cmd: Cmd that was issued to abort another cmd + * + * The megasas_issue_blocked_abort_cmd() function waits on abort_cmd_wait_q + * after it issues an abort on a previously issued command. This function + * wakes up all functions waiting on the same wait queue. + */ +static void +megasas_complete_abort(struct megasas_instance *instance, + struct megasas_cmd *cmd) +{ + if (cmd->sync_cmd) { + cmd->sync_cmd = 0; + cmd->cmd_status = 0; + wake_up(&instance->abort_cmd_wait_q); + } + + return; +} + +/** + * megasas_unmap_sgbuf - Unmap SG buffers + * @instance: Adapter soft state + * @cmd: Completed command + */ +static inline void +megasas_unmap_sgbuf(struct megasas_instance *instance, struct megasas_cmd *cmd) +{ + dma_addr_t buf_h; + u8 opcode; + + if (cmd->scmd->use_sg) { + pci_unmap_sg(instance->pdev, cmd->scmd->request_buffer, + cmd->scmd->use_sg, cmd->scmd->sc_data_direction); + return; + } + + if (!cmd->scmd->request_bufflen) + return; + + opcode = cmd->frame->hdr.cmd; + + if ((opcode == MFI_CMD_LD_READ) || (opcode == MFI_CMD_LD_WRITE)) { + if (IS_DMA64) + buf_h = cmd->frame->io.sgl.sge64[0].phys_addr; + else + buf_h = cmd->frame->io.sgl.sge32[0].phys_addr; + } else { + if (IS_DMA64) + buf_h = cmd->frame->pthru.sgl.sge64[0].phys_addr; + else + buf_h = cmd->frame->pthru.sgl.sge32[0].phys_addr; + } + + pci_unmap_single(instance->pdev, buf_h, cmd->scmd->request_bufflen, + cmd->scmd->sc_data_direction); + return; +} + +/** + * megasas_complete_cmd - Completes a command + * @instance: Adapter soft state + * @cmd: Command to be completed + * @alt_status: If non-zero, use this value as status to + * SCSI mid-layer instead of the value returned + * by the FW. This should be used if caller wants + * an alternate status (as in the case of aborted + * commands) + */ +static inline void +megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd, + u8 alt_status) +{ + int exception = 0; + struct megasas_header *hdr = &cmd->frame->hdr; + unsigned long flags; + + if (cmd->scmd) { + cmd->scmd->SCp.ptr = (char *)0; + } + + switch (hdr->cmd) { + + case MFI_CMD_PD_SCSI_IO: + case MFI_CMD_LD_SCSI_IO: + + /* + * MFI_CMD_PD_SCSI_IO and MFI_CMD_LD_SCSI_IO could have been + * issued either through an IO path or an IOCTL path. If it + * was via IOCTL, we will send it to internal completion. + */ + if (cmd->sync_cmd) { + cmd->sync_cmd = 0; + megasas_complete_int_cmd(instance, cmd); + break; + } + + /* + * Don't export physical disk devices to mid-layer. + */ + if (!MEGASAS_IS_LOGICAL(cmd->scmd) && + (hdr->cmd_status == MFI_STAT_OK) && + (cmd->scmd->cmnd[0] == INQUIRY)) { + + if (((*(u8 *) cmd->scmd->request_buffer) & 0x1F) == + TYPE_DISK) { + cmd->scmd->result = DID_BAD_TARGET << 16; + exception = 1; + } + } + + case MFI_CMD_LD_READ: + case MFI_CMD_LD_WRITE: + + if (alt_status) { + cmd->scmd->result = alt_status << 16; + exception = 1; + } + + if (exception) { + + spin_lock_irqsave(&instance->instance_lock, flags); + instance->fw_outstanding--; + spin_unlock_irqrestore(&instance->instance_lock, flags); + + megasas_unmap_sgbuf(instance, cmd); + cmd->scmd->scsi_done(cmd->scmd); + megasas_return_cmd(instance, cmd); + + break; + } + + switch (hdr->cmd_status) { + + case MFI_STAT_OK: + cmd->scmd->result = DID_OK << 16; + break; + + case MFI_STAT_SCSI_IO_FAILED: + case MFI_STAT_LD_INIT_IN_PROGRESS: + cmd->scmd->result = + (DID_ERROR << 16) | hdr->scsi_status; + break; + + case MFI_STAT_SCSI_DONE_WITH_ERROR: + + cmd->scmd->result = (DID_OK << 16) | hdr->scsi_status; + + if (hdr->scsi_status == SAM_STAT_CHECK_CONDITION) { + memset(cmd->scmd->sense_buffer, 0, + SCSI_SENSE_BUFFERSIZE); + memcpy(cmd->scmd->sense_buffer, cmd->sense, + hdr->sense_len); + + cmd->scmd->result |= DRIVER_SENSE << 24; + } + + break; + + case MFI_STAT_LD_OFFLINE: + case MFI_STAT_DEVICE_NOT_FOUND: + cmd->scmd->result = DID_BAD_TARGET << 16; + break; + + default: + printk(KERN_DEBUG "megasas: MFI FW status %#x\n", + hdr->cmd_status); + cmd->scmd->result = DID_ERROR << 16; + break; + } + + spin_lock_irqsave(&instance->instance_lock, flags); + instance->fw_outstanding--; + spin_unlock_irqrestore(&instance->instance_lock, flags); + + megasas_unmap_sgbuf(instance, cmd); + cmd->scmd->scsi_done(cmd->scmd); + megasas_return_cmd(instance, cmd); + + break; + + case MFI_CMD_SMP: + case MFI_CMD_STP: + case MFI_CMD_DCMD: + + /* + * See if got an event notification + */ + if (cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_WAIT) + megasas_service_aen(instance, cmd); + else + megasas_complete_int_cmd(instance, cmd); + + break; + + case MFI_CMD_ABORT: + /* + * Cmd issued to abort another cmd returned + */ + megasas_complete_abort(instance, cmd); + break; + + default: + printk("megasas: Unknown command completed! [0x%X]\n", + hdr->cmd); + break; + } +} + +/** + * megasas_deplete_reply_queue - Processes all completed commands + * @instance: Adapter soft state + * @alt_status: Alternate status to be returned to + * SCSI mid-layer instead of the status + * returned by the FW + */ +static inline int +megasas_deplete_reply_queue(struct megasas_instance *instance, u8 alt_status) +{ + u32 status; + u32 producer; + u32 consumer; + u32 context; + struct megasas_cmd *cmd; + + /* + * Check if it is our interrupt + */ + status = readl(&instance->reg_set->outbound_intr_status); + + if (!(status & MFI_OB_INTR_STATUS_MASK)) { + return IRQ_NONE; + } + + /* + * Clear the interrupt by writing back the same value + */ + writel(status, &instance->reg_set->outbound_intr_status); + + producer = *instance->producer; + consumer = *instance->consumer; + + while (consumer != producer) { + context = instance->reply_queue[consumer]; + + cmd = instance->cmd_list[context]; + + megasas_complete_cmd(instance, cmd, alt_status); + + consumer++; + if (consumer == (instance->max_fw_cmds + 1)) { + consumer = 0; + } + } + + *instance->consumer = producer; + + return IRQ_HANDLED; +} + +/** + * megasas_isr - isr entry point + */ +static irqreturn_t megasas_isr(int irq, void *devp, struct pt_regs *regs) +{ + return megasas_deplete_reply_queue((struct megasas_instance *)devp, + DID_OK); +} + +/** + * megasas_transition_to_ready - Move the FW to READY state + * @reg_set: MFI register set + * + * During the initialization, FW passes can potentially be in any one of + * several possible states. If the FW in operational, waiting-for-handshake + * states, driver must take steps to bring it to ready state. Otherwise, it + * has to wait for the ready state. + */ +static int +megasas_transition_to_ready(struct megasas_register_set __iomem * reg_set) +{ + int i; + u8 max_wait; + u32 fw_state; + u32 cur_state; + + fw_state = readl(®_set->outbound_msg_0) & MFI_STATE_MASK; + + while (fw_state != MFI_STATE_READY) { + + printk(KERN_INFO "megasas: Waiting for FW to come to ready" + " state\n"); + switch (fw_state) { + + case MFI_STATE_FAULT: + + printk(KERN_DEBUG "megasas: FW in FAULT state!!\n"); + return -ENODEV; + + case MFI_STATE_WAIT_HANDSHAKE: + /* + * Set the CLR bit in inbound doorbell + */ + writel(MFI_INIT_CLEAR_HANDSHAKE, + ®_set->inbound_doorbell); + + max_wait = 2; + cur_state = MFI_STATE_WAIT_HANDSHAKE; + break; + + case MFI_STATE_OPERATIONAL: + /* + * Bring it to READY state; assuming max wait 2 secs + */ + megasas_disable_intr(reg_set); + writel(MFI_INIT_READY, ®_set->inbound_doorbell); + + max_wait = 10; + cur_state = MFI_STATE_OPERATIONAL; + break; + + case MFI_STATE_UNDEFINED: + /* + * This state should not last for more than 2 seconds + */ + max_wait = 2; + cur_state = MFI_STATE_UNDEFINED; + break; + + case MFI_STATE_BB_INIT: + max_wait = 2; + cur_state = MFI_STATE_BB_INIT; + break; + + case MFI_STATE_FW_INIT: + max_wait = 20; + cur_state = MFI_STATE_FW_INIT; + break; + + case MFI_STATE_FW_INIT_2: + max_wait = 20; + cur_state = MFI_STATE_FW_INIT_2; + break; + + case MFI_STATE_DEVICE_SCAN: + max_wait = 20; + cur_state = MFI_STATE_DEVICE_SCAN; + break; + + case MFI_STATE_FLUSH_CACHE: + max_wait = 20; + cur_state = MFI_STATE_FLUSH_CACHE; + break; + + default: + printk(KERN_DEBUG "megasas: Unknown state 0x%x\n", + fw_state); + return -ENODEV; + } + + /* + * The cur_state should not last for more than max_wait secs + */ + for (i = 0; i < (max_wait * 1000); i++) { + fw_state = MFI_STATE_MASK & + readl(®_set->outbound_msg_0); + + if (fw_state == cur_state) { + msleep(1); + } else + break; + } + + /* + * Return error if fw_state hasn't changed after max_wait + */ + if (fw_state == cur_state) { + printk(KERN_DEBUG "FW state [%d] hasn't changed " + "in %d secs\n", fw_state, max_wait); + return -ENODEV; + } + }; + + return 0; +} + +/** + * megasas_teardown_frame_pool - Destroy the cmd frame DMA pool + * @instance: Adapter soft state + */ +static void megasas_teardown_frame_pool(struct megasas_instance *instance) +{ + int i; + u32 max_cmd = instance->max_fw_cmds; + struct megasas_cmd *cmd; + + if (!instance->frame_dma_pool) + return; + + /* + * Return all frames to pool + */ + for (i = 0; i < max_cmd; i++) { + + cmd = instance->cmd_list[i]; + + if (cmd->frame) + pci_pool_free(instance->frame_dma_pool, cmd->frame, + cmd->frame_phys_addr); + + if (cmd->sense) + pci_pool_free(instance->sense_dma_pool, cmd->frame, + cmd->sense_phys_addr); + } + + /* + * Now destroy the pool itself + */ + pci_pool_destroy(instance->frame_dma_pool); + pci_pool_destroy(instance->sense_dma_pool); + + instance->frame_dma_pool = NULL; + instance->sense_dma_pool = NULL; +} + +/** + * megasas_create_frame_pool - Creates DMA pool for cmd frames + * @instance: Adapter soft state + * + * Each command packet has an embedded DMA memory buffer that is used for + * filling MFI frame and the SG list that immediately follows the frame. This + * function creates those DMA memory buffers for each command packet by using + * PCI pool facility. + */ +static int megasas_create_frame_pool(struct megasas_instance *instance) +{ + int i; + u32 max_cmd; + u32 sge_sz; + u32 sgl_sz; + u32 total_sz; + u32 frame_count; + struct megasas_cmd *cmd; + + max_cmd = instance->max_fw_cmds; + + /* + * Size of our frame is 64 bytes for MFI frame, followed by max SG + * elements and finally SCSI_SENSE_BUFFERSIZE bytes for sense buffer + */ + sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) : + sizeof(struct megasas_sge32); + + /* + * Calculated the number of 64byte frames required for SGL + */ + sgl_sz = sge_sz * instance->max_num_sge; + frame_count = (sgl_sz + MEGAMFI_FRAME_SIZE - 1) / MEGAMFI_FRAME_SIZE; + + /* + * We need one extra frame for the MFI command + */ + frame_count++; + + total_sz = MEGAMFI_FRAME_SIZE * frame_count; + /* + * Use DMA pool facility provided by PCI layer + */ + instance->frame_dma_pool = pci_pool_create("megasas frame pool", + instance->pdev, total_sz, 64, + 0); + + if (!instance->frame_dma_pool) { + printk(KERN_DEBUG "megasas: failed to setup frame pool\n"); + return -ENOMEM; + } + + instance->sense_dma_pool = pci_pool_create("megasas sense pool", + instance->pdev, 128, 4, 0); + + if (!instance->sense_dma_pool) { + printk(KERN_DEBUG "megasas: failed to setup sense pool\n"); + + pci_pool_destroy(instance->frame_dma_pool); + instance->frame_dma_pool = NULL; + + return -ENOMEM; + } + + /* + * Allocate and attach a frame to each of the commands in cmd_list. + * By making cmd->index as the context instead of the &cmd, we can + * always use 32bit context regardless of the architecture + */ + for (i = 0; i < max_cmd; i++) { + + cmd = instance->cmd_list[i]; + + cmd->frame = pci_pool_alloc(instance->frame_dma_pool, + GFP_KERNEL, &cmd->frame_phys_addr); + + cmd->sense = pci_pool_alloc(instance->sense_dma_pool, + GFP_KERNEL, &cmd->sense_phys_addr); + + /* + * megasas_teardown_frame_pool() takes care of freeing + * whatever has been allocated + */ + if (!cmd->frame || !cmd->sense) { + printk(KERN_DEBUG "megasas: pci_pool_alloc failed \n"); + megasas_teardown_frame_pool(instance); + return -ENOMEM; + } + + cmd->frame->io.context = cmd->index; + } + + return 0; +} + +/** + * megasas_free_cmds - Free all the cmds in the free cmd pool + * @instance: Adapter soft state + */ +static void megasas_free_cmds(struct megasas_instance *instance) +{ + int i; + /* First free the MFI frame pool */ + megasas_teardown_frame_pool(instance); + + /* Free all the commands in the cmd_list */ + for (i = 0; i < instance->max_fw_cmds; i++) + kfree(instance->cmd_list[i]); + + /* Free the cmd_list buffer itself */ + kfree(instance->cmd_list); + instance->cmd_list = NULL; + + INIT_LIST_HEAD(&instance->cmd_pool); +} + +/** + * megasas_alloc_cmds - Allocates the command packets + * @instance: Adapter soft state + * + * Each command that is issued to the FW, whether IO commands from the OS or + * internal commands like IOCTLs, are wrapped in local data structure called + * megasas_cmd. The frame embedded in this megasas_cmd is actually issued to + * the FW. + * + * Each frame has a 32-bit field called context (tag). This context is used + * to get back the megasas_cmd from the frame when a frame gets completed in + * the ISR. Typically the address of the megasas_cmd itself would be used as + * the context. But we wanted to keep the differences between 32 and 64 bit + * systems to the mininum. We always use 32 bit integers for the context. In + * this driver, the 32 bit values are the indices into an array cmd_list. + * This array is used only to look up the megasas_cmd given the context. The + * free commands themselves are maintained in a linked list called cmd_pool. + */ +static int megasas_alloc_cmds(struct megasas_instance *instance) +{ + int i; + int j; + u32 max_cmd; + struct megasas_cmd *cmd; + + max_cmd = instance->max_fw_cmds; + + /* + * instance->cmd_list is an array of struct megasas_cmd pointers. + * Allocate the dynamic array first and then allocate individual + * commands. + */ + instance->cmd_list = kmalloc(sizeof(struct megasas_cmd *) * max_cmd, + GFP_KERNEL); + + if (!instance->cmd_list) { + printk(KERN_DEBUG "megasas: out of memory\n"); + return -ENOMEM; + } + + memset(instance->cmd_list, 0, sizeof(struct megasas_cmd *) * max_cmd); + + for (i = 0; i < max_cmd; i++) { + instance->cmd_list[i] = kmalloc(sizeof(struct megasas_cmd), + GFP_KERNEL); + + if (!instance->cmd_list[i]) { + + for (j = 0; j < i; j++) + kfree(instance->cmd_list[j]); + + kfree(instance->cmd_list); + instance->cmd_list = NULL; + + return -ENOMEM; + } + } + + /* + * Add all the commands to command pool (instance->cmd_pool) + */ + for (i = 0; i < max_cmd; i++) { + cmd = instance->cmd_list[i]; + memset(cmd, 0, sizeof(struct megasas_cmd)); + cmd->index = i; + cmd->instance = instance; + + list_add_tail(&cmd->list, &instance->cmd_pool); + } + + /* + * Create a frame pool and assign one frame to each cmd + */ + if (megasas_create_frame_pool(instance)) { + printk(KERN_DEBUG "megasas: Error creating frame DMA pool\n"); + megasas_free_cmds(instance); + } + + return 0; +} + +/** + * megasas_get_controller_info - Returns FW's controller structure + * @instance: Adapter soft state + * @ctrl_info: Controller information structure + * + * Issues an internal command (DCMD) to get the FW's controller structure. + * This information is mainly used to find out the maximum IO transfer per + * command supported by the FW. + */ +static int +megasas_get_ctrl_info(struct megasas_instance *instance, + struct megasas_ctrl_info *ctrl_info) +{ + int ret = 0; + struct megasas_cmd *cmd; + struct megasas_dcmd_frame *dcmd; + struct megasas_ctrl_info *ci; + dma_addr_t ci_h = 0; + + cmd = megasas_get_cmd(instance); + + if (!cmd) { + printk(KERN_DEBUG "megasas: Failed to get a free cmd\n"); + return -ENOMEM; + } + + dcmd = &cmd->frame->dcmd; + + ci = pci_alloc_consistent(instance->pdev, + sizeof(struct megasas_ctrl_info), &ci_h); + + if (!ci) { + printk(KERN_DEBUG "Failed to alloc mem for ctrl info\n"); + megasas_return_cmd(instance, cmd); + return -ENOMEM; + } + + memset(ci, 0, sizeof(*ci)); + memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); + + dcmd->cmd = MFI_CMD_DCMD; + dcmd->cmd_status = 0xFF; + dcmd->sge_count = 1; + dcmd->flags = MFI_FRAME_DIR_READ; + dcmd->timeout = 0; + dcmd->data_xfer_len = sizeof(struct megasas_ctrl_info); + dcmd->opcode = MR_DCMD_CTRL_GET_INFO; + dcmd->sgl.sge32[0].phys_addr = ci_h; + dcmd->sgl.sge32[0].length = sizeof(struct megasas_ctrl_info); + + if (!megasas_issue_polled(instance, cmd)) { + ret = 0; + memcpy(ctrl_info, ci, sizeof(struct megasas_ctrl_info)); + } else { + ret = -1; + } + + pci_free_consistent(instance->pdev, sizeof(struct megasas_ctrl_info), + ci, ci_h); + + megasas_return_cmd(instance, cmd); + return ret; +} + +/** + * megasas_init_mfi - Initializes the FW + * @instance: Adapter soft state + * + * This is the main function for initializing MFI firmware. + */ +static int megasas_init_mfi(struct megasas_instance *instance) +{ + u32 context_sz; + u32 reply_q_sz; + u32 max_sectors_1; + u32 max_sectors_2; + struct megasas_register_set __iomem *reg_set; + + struct megasas_cmd *cmd; + struct megasas_ctrl_info *ctrl_info; + + struct megasas_init_frame *init_frame; + struct megasas_init_queue_info *initq_info; + dma_addr_t init_frame_h; + dma_addr_t initq_info_h; + + /* + * Map the message registers + */ + instance->base_addr = pci_resource_start(instance->pdev, 0); + + if (pci_request_regions(instance->pdev, "megasas: LSI Logic")) { + printk(KERN_DEBUG "megasas: IO memory region busy!\n"); + return -EBUSY; + } + + instance->reg_set = ioremap_nocache(instance->base_addr, 8192); + + if (!instance->reg_set) { + printk(KERN_DEBUG "megasas: Failed to map IO mem\n"); + goto fail_ioremap; + } + + reg_set = instance->reg_set; + + /* + * We expect the FW state to be READY + */ + if (megasas_transition_to_ready(instance->reg_set)) + goto fail_ready_state; + + /* + * Get various operational parameters from status register + */ + instance->max_fw_cmds = readl(®_set->outbound_msg_0) & 0x00FFFF; + instance->max_num_sge = (readl(®_set->outbound_msg_0) & 0xFF0000) >> + 0x10; + /* + * Create a pool of commands + */ + if (megasas_alloc_cmds(instance)) + goto fail_alloc_cmds; + + /* + * Allocate memory for reply queue. Length of reply queue should + * be _one_ more than the maximum commands handled by the firmware. + * + * Note: When FW completes commands, it places corresponding contex + * values in this circular reply queue. This circular queue is a fairly + * typical producer-consumer queue. FW is the producer (of completed + * commands) and the driver is the consumer. + */ + context_sz = sizeof(u32); + reply_q_sz = context_sz * (instance->max_fw_cmds + 1); + + instance->reply_queue = pci_alloc_consistent(instance->pdev, + reply_q_sz, + &instance->reply_queue_h); + + if (!instance->reply_queue) { + printk(KERN_DEBUG "megasas: Out of DMA mem for reply queue\n"); + goto fail_reply_queue; + } + + /* + * Prepare a init frame. Note the init frame points to queue info + * structure. Each frame has SGL allocated after first 64 bytes. For + * this frame - since we don't need any SGL - we use SGL's space as + * queue info structure + * + * We will not get a NULL command below. We just created the pool. + */ + cmd = megasas_get_cmd(instance); + + init_frame = (struct megasas_init_frame *)cmd->frame; + initq_info = (struct megasas_init_queue_info *) + ((unsigned long)init_frame + 64); + + init_frame_h = cmd->frame_phys_addr; + initq_info_h = init_frame_h + 64; + + memset(init_frame, 0, MEGAMFI_FRAME_SIZE); + memset(initq_info, 0, sizeof(struct megasas_init_queue_info)); + + initq_info->reply_queue_entries = instance->max_fw_cmds + 1; + initq_info->reply_queue_start_phys_addr_lo = instance->reply_queue_h; + + initq_info->producer_index_phys_addr_lo = instance->producer_h; + initq_info->consumer_index_phys_addr_lo = instance->consumer_h; + + init_frame->cmd = MFI_CMD_INIT; + init_frame->cmd_status = 0xFF; + init_frame->queue_info_new_phys_addr_lo = initq_info_h; + + init_frame->data_xfer_len = sizeof(struct megasas_init_queue_info); + + /* + * Issue the init frame in polled mode + */ + if (megasas_issue_polled(instance, cmd)) { + printk(KERN_DEBUG "megasas: Failed to init firmware\n"); + goto fail_fw_init; + } + + megasas_return_cmd(instance, cmd); + + ctrl_info = kmalloc(sizeof(struct megasas_ctrl_info), GFP_KERNEL); + + /* + * Compute the max allowed sectors per IO: The controller info has two + * limits on max sectors. Driver should use the minimum of these two. + * + * 1 << stripe_sz_ops.min = max sectors per strip + * + * Note that older firmwares ( < FW ver 30) didn't report information + * to calculate max_sectors_1. So the number ended up as zero always. + */ + if (ctrl_info && !megasas_get_ctrl_info(instance, ctrl_info)) { + + max_sectors_1 = (1 << ctrl_info->stripe_sz_ops.min) * + ctrl_info->max_strips_per_io; + max_sectors_2 = ctrl_info->max_request_size; + + instance->max_sectors_per_req = (max_sectors_1 < max_sectors_2) + ? max_sectors_1 : max_sectors_2; + } else + instance->max_sectors_per_req = instance->max_num_sge * + PAGE_SIZE / 512; + + kfree(ctrl_info); + + return 0; + + fail_fw_init: + megasas_return_cmd(instance, cmd); + + pci_free_consistent(instance->pdev, reply_q_sz, + instance->reply_queue, instance->reply_queue_h); + fail_reply_queue: + megasas_free_cmds(instance); + + fail_alloc_cmds: + fail_ready_state: + iounmap(instance->reg_set); + + fail_ioremap: + pci_release_regions(instance->pdev); + + return -EINVAL; +} + +/** + * megasas_release_mfi - Reverses the FW initialization + * @intance: Adapter soft state + */ +static void megasas_release_mfi(struct megasas_instance *instance) +{ + u32 reply_q_sz = sizeof(u32) * (instance->max_fw_cmds + 1); + + pci_free_consistent(instance->pdev, reply_q_sz, + instance->reply_queue, instance->reply_queue_h); + + megasas_free_cmds(instance); + + iounmap(instance->reg_set); + + pci_release_regions(instance->pdev); +} + +/** + * megasas_get_seq_num - Gets latest event sequence numbers + * @instance: Adapter soft state + * @eli: FW event log sequence numbers information + * + * FW maintains a log of all events in a non-volatile area. Upper layers would + * usually find out the latest sequence number of the events, the seq number at + * the boot etc. They would "read" all the events below the latest seq number + * by issuing a direct fw cmd (DCMD). For the future events (beyond latest seq + * number), they would subsribe to AEN (asynchronous event notification) and + * wait for the events to happen. + */ +static int +megasas_get_seq_num(struct megasas_instance *instance, + struct megasas_evt_log_info *eli) +{ + struct megasas_cmd *cmd; + struct megasas_dcmd_frame *dcmd; + struct megasas_evt_log_info *el_info; + dma_addr_t el_info_h = 0; + + cmd = megasas_get_cmd(instance); + + if (!cmd) { + return -ENOMEM; + } + + dcmd = &cmd->frame->dcmd; + el_info = pci_alloc_consistent(instance->pdev, + sizeof(struct megasas_evt_log_info), + &el_info_h); + + if (!el_info) { + megasas_return_cmd(instance, cmd); + return -ENOMEM; + } + + memset(el_info, 0, sizeof(*el_info)); + memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); + + dcmd->cmd = MFI_CMD_DCMD; + dcmd->cmd_status = 0x0; + dcmd->sge_count = 1; + dcmd->flags = MFI_FRAME_DIR_READ; + dcmd->timeout = 0; + dcmd->data_xfer_len = sizeof(struct megasas_evt_log_info); + dcmd->opcode = MR_DCMD_CTRL_EVENT_GET_INFO; + dcmd->sgl.sge32[0].phys_addr = el_info_h; + dcmd->sgl.sge32[0].length = sizeof(struct megasas_evt_log_info); + + megasas_issue_blocked_cmd(instance, cmd); + + /* + * Copy the data back into callers buffer + */ + memcpy(eli, el_info, sizeof(struct megasas_evt_log_info)); + + pci_free_consistent(instance->pdev, sizeof(struct megasas_evt_log_info), + el_info, el_info_h); + + megasas_return_cmd(instance, cmd); + + return 0; +} + +/** + * megasas_register_aen - Registers for asynchronous event notification + * @instance: Adapter soft state + * @seq_num: The starting sequence number + * @class_locale: Class of the event + * + * This function subscribes for AEN for events beyond the @seq_num. It requests + * to be notified if and only if the event is of type @class_locale + */ +static int +megasas_register_aen(struct megasas_instance *instance, u32 seq_num, + u32 class_locale_word) +{ + int ret_val; + struct megasas_cmd *cmd; + struct megasas_dcmd_frame *dcmd; + union megasas_evt_class_locale curr_aen; + union megasas_evt_class_locale prev_aen; + + /* + * If there an AEN pending already (aen_cmd), check if the + * class_locale of that pending AEN is inclusive of the new + * AEN request we currently have. If it is, then we don't have + * to do anything. In other words, whichever events the current + * AEN request is subscribing to, have already been subscribed + * to. + * + * If the old_cmd is _not_ inclusive, then we have to abort + * that command, form a class_locale that is superset of both + * old and current and re-issue to the FW + */ + + curr_aen.word = class_locale_word; + + if (instance->aen_cmd) { + + prev_aen.word = instance->aen_cmd->frame->dcmd.mbox.w[1]; + + /* + * A class whose enum value is smaller is inclusive of all + * higher values. If a PROGRESS (= -1) was previously + * registered, then a new registration requests for higher + * classes need not be sent to FW. They are automatically + * included. + * + * Locale numbers don't have such hierarchy. They are bitmap + * values + */ + if ((prev_aen.members.class <= curr_aen.members.class) && + !((prev_aen.members.locale & curr_aen.members.locale) ^ + curr_aen.members.locale)) { + /* + * Previously issued event registration includes + * current request. Nothing to do. + */ + return 0; + } else { + curr_aen.members.locale |= prev_aen.members.locale; + + if (prev_aen.members.class < curr_aen.members.class) + curr_aen.members.class = prev_aen.members.class; + + instance->aen_cmd->abort_aen = 1; + ret_val = megasas_issue_blocked_abort_cmd(instance, + instance-> + aen_cmd); + + if (ret_val) { + printk(KERN_DEBUG "megasas: Failed to abort " + "previous AEN command\n"); + return ret_val; + } + } + } + + cmd = megasas_get_cmd(instance); + + if (!cmd) + return -ENOMEM; + + dcmd = &cmd->frame->dcmd; + + memset(instance->evt_detail, 0, sizeof(struct megasas_evt_detail)); + + /* + * Prepare DCMD for aen registration + */ + memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); + + dcmd->cmd = MFI_CMD_DCMD; + dcmd->cmd_status = 0x0; + dcmd->sge_count = 1; + dcmd->flags = MFI_FRAME_DIR_READ; + dcmd->timeout = 0; + dcmd->data_xfer_len = sizeof(struct megasas_evt_detail); + dcmd->opcode = MR_DCMD_CTRL_EVENT_WAIT; + dcmd->mbox.w[0] = seq_num; + dcmd->mbox.w[1] = curr_aen.word; + dcmd->sgl.sge32[0].phys_addr = (u32) instance->evt_detail_h; + dcmd->sgl.sge32[0].length = sizeof(struct megasas_evt_detail); + + /* + * Store reference to the cmd used to register for AEN. When an + * application wants us to register for AEN, we have to abort this + * cmd and re-register with a new EVENT LOCALE supplied by that app + */ + instance->aen_cmd = cmd; + + /* + * Issue the aen registration frame + */ + writel(cmd->frame_phys_addr >> 3, + &instance->reg_set->inbound_queue_port); + + return 0; +} + +/** + * megasas_start_aen - Subscribes to AEN during driver load time + * @instance: Adapter soft state + */ +static int megasas_start_aen(struct megasas_instance *instance) +{ + struct megasas_evt_log_info eli; + union megasas_evt_class_locale class_locale; + + /* + * Get the latest sequence number from FW + */ + memset(&eli, 0, sizeof(eli)); + + if (megasas_get_seq_num(instance, &eli)) + return -1; + + /* + * Register AEN with FW for latest sequence number plus 1 + */ + class_locale.members.reserved = 0; + class_locale.members.locale = MR_EVT_LOCALE_ALL; + class_locale.members.class = MR_EVT_CLASS_DEBUG; + + return megasas_register_aen(instance, eli.newest_seq_num + 1, + class_locale.word); +} + +/** + * megasas_io_attach - Attaches this driver to SCSI mid-layer + * @instance: Adapter soft state + */ +static int megasas_io_attach(struct megasas_instance *instance) +{ + struct Scsi_Host *host = instance->host; + + /* + * Export parameters required by SCSI mid-layer + */ + host->irq = instance->pdev->irq; + host->unique_id = instance->unique_id; + host->can_queue = instance->max_fw_cmds - MEGASAS_INT_CMDS; + host->this_id = instance->init_id; + host->sg_tablesize = instance->max_num_sge; + host->max_sectors = instance->max_sectors_per_req; + host->cmd_per_lun = 128; + host->max_channel = MEGASAS_MAX_CHANNELS - 1; + host->max_id = MEGASAS_MAX_DEV_PER_CHANNEL; + host->max_lun = MEGASAS_MAX_LUN; + + /* + * Notify the mid-layer about the new controller + */ + if (scsi_add_host(host, &instance->pdev->dev)) { + printk(KERN_DEBUG "megasas: scsi_add_host failed\n"); + return -ENODEV; + } + + /* + * Trigger SCSI to scan our drives + */ + scsi_scan_host(host); + return 0; +} + +/** + * megasas_probe_one - PCI hotplug entry point + * @pdev: PCI device structure + * @id: PCI ids of supported hotplugged adapter + */ +static int __devinit +megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + int rval; + struct Scsi_Host *host; + struct megasas_instance *instance; + + /* + * Announce PCI information + */ + printk(KERN_INFO "megasas: %#4.04x:%#4.04x:%#4.04x:%#4.04x: ", + pdev->vendor, pdev->device, pdev->subsystem_vendor, + pdev->subsystem_device); + + printk("bus %d:slot %d:func %d\n", + pdev->bus->number, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); + + /* + * PCI prepping: enable device set bus mastering and dma mask + */ + rval = pci_enable_device(pdev); + + if (rval) { + return rval; + } + + pci_set_master(pdev); + + /* + * All our contollers are capable of performing 64-bit DMA + */ + if (IS_DMA64) { + if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) != 0) { + + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) + goto fail_set_dma_mask; + } + } else { + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) + goto fail_set_dma_mask; + } + + host = scsi_host_alloc(&megasas_template, + sizeof(struct megasas_instance)); + + if (!host) { + printk(KERN_DEBUG "megasas: scsi_host_alloc failed\n"); + goto fail_alloc_instance; + } + + instance = (struct megasas_instance *)host->hostdata; + memset(instance, 0, sizeof(*instance)); + + instance->producer = pci_alloc_consistent(pdev, sizeof(u32), + &instance->producer_h); + instance->consumer = pci_alloc_consistent(pdev, sizeof(u32), + &instance->consumer_h); + + if (!instance->producer || !instance->consumer) { + printk(KERN_DEBUG "megasas: Failed to allocate memory for " + "producer, consumer\n"); + goto fail_alloc_dma_buf; + } + + *instance->producer = 0; + *instance->consumer = 0; + + instance->evt_detail = pci_alloc_consistent(pdev, + sizeof(struct + megasas_evt_detail), + &instance->evt_detail_h); + + if (!instance->evt_detail) { + printk(KERN_DEBUG "megasas: Failed to allocate memory for " + "event detail structure\n"); + goto fail_alloc_dma_buf; + } + + /* + * Initialize locks and queues + */ + INIT_LIST_HEAD(&instance->cmd_pool); + + init_waitqueue_head(&instance->int_cmd_wait_q); + init_waitqueue_head(&instance->abort_cmd_wait_q); + + spin_lock_init(&instance->cmd_pool_lock); + spin_lock_init(&instance->instance_lock); + + sema_init(&instance->aen_mutex, 1); + sema_init(&instance->ioctl_sem, MEGASAS_INT_CMDS); + + /* + * Initialize PCI related and misc parameters + */ + instance->pdev = pdev; + instance->host = host; + instance->unique_id = pdev->bus->number << 8 | pdev->devfn; + instance->init_id = MEGASAS_DEFAULT_INIT_ID; + + /* + * Initialize MFI Firmware + */ + if (megasas_init_mfi(instance)) + goto fail_init_mfi; + + /* + * Register IRQ + */ + if (request_irq(pdev->irq, megasas_isr, SA_SHIRQ, "megasas", instance)) { + printk(KERN_DEBUG "megasas: Failed to register IRQ\n"); + goto fail_irq; + } + + megasas_enable_intr(instance->reg_set); + + /* + * Store instance in PCI softstate + */ + pci_set_drvdata(pdev, instance); + + /* + * Add this controller to megasas_mgmt_info structure so that it + * can be exported to management applications + */ + megasas_mgmt_info.count++; + megasas_mgmt_info.instance[megasas_mgmt_info.max_index] = instance; + megasas_mgmt_info.max_index++; + + /* + * Initiate AEN (Asynchronous Event Notification) + */ + if (megasas_start_aen(instance)) { + printk(KERN_DEBUG "megasas: start aen failed\n"); + goto fail_start_aen; + } + + /* + * Register with SCSI mid-layer + */ + if (megasas_io_attach(instance)) + goto fail_io_attach; + + return 0; + + fail_start_aen: + fail_io_attach: + megasas_mgmt_info.count--; + megasas_mgmt_info.instance[megasas_mgmt_info.max_index] = NULL; + megasas_mgmt_info.max_index--; + + pci_set_drvdata(pdev, NULL); + megasas_disable_intr(instance->reg_set); + free_irq(instance->pdev->irq, instance); + + megasas_release_mfi(instance); + + fail_irq: + fail_init_mfi: + fail_alloc_dma_buf: + if (instance->evt_detail) + pci_free_consistent(pdev, sizeof(struct megasas_evt_detail), + instance->evt_detail, + instance->evt_detail_h); + + if (instance->producer) + pci_free_consistent(pdev, sizeof(u32), instance->producer, + instance->producer_h); + if (instance->consumer) + pci_free_consistent(pdev, sizeof(u32), instance->consumer, + instance->consumer_h); + scsi_host_put(host); + + fail_alloc_instance: + fail_set_dma_mask: + pci_disable_device(pdev); + + return -ENODEV; +} + +/** + * megasas_flush_cache - Requests FW to flush all its caches + * @instance: Adapter soft state + */ +static void megasas_flush_cache(struct megasas_instance *instance) +{ + struct megasas_cmd *cmd; + struct megasas_dcmd_frame *dcmd; + + cmd = megasas_get_cmd(instance); + + if (!cmd) + return; + + dcmd = &cmd->frame->dcmd; + + memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); + + dcmd->cmd = MFI_CMD_DCMD; + dcmd->cmd_status = 0x0; + dcmd->sge_count = 0; + dcmd->flags = MFI_FRAME_DIR_NONE; + dcmd->timeout = 0; + dcmd->data_xfer_len = 0; + dcmd->opcode = MR_DCMD_CTRL_CACHE_FLUSH; + dcmd->mbox.b[0] = MR_FLUSH_CTRL_CACHE | MR_FLUSH_DISK_CACHE; + + megasas_issue_blocked_cmd(instance, cmd); + + megasas_return_cmd(instance, cmd); + + return; +} + +/** + * megasas_shutdown_controller - Instructs FW to shutdown the controller + * @instance: Adapter soft state + */ +static void megasas_shutdown_controller(struct megasas_instance *instance) +{ + struct megasas_cmd *cmd; + struct megasas_dcmd_frame *dcmd; + + cmd = megasas_get_cmd(instance); + + if (!cmd) + return; + + if (instance->aen_cmd) + megasas_issue_blocked_abort_cmd(instance, instance->aen_cmd); + + dcmd = &cmd->frame->dcmd; + + memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); + + dcmd->cmd = MFI_CMD_DCMD; + dcmd->cmd_status = 0x0; + dcmd->sge_count = 0; + dcmd->flags = MFI_FRAME_DIR_NONE; + dcmd->timeout = 0; + dcmd->data_xfer_len = 0; + dcmd->opcode = MR_DCMD_CTRL_SHUTDOWN; + + megasas_issue_blocked_cmd(instance, cmd); + + megasas_return_cmd(instance, cmd); + + return; +} + +/** + * megasas_detach_one - PCI hot"un"plug entry point + * @pdev: PCI device structure + */ +static void megasas_detach_one(struct pci_dev *pdev) +{ + int i; + struct Scsi_Host *host; + struct megasas_instance *instance; + + instance = pci_get_drvdata(pdev); + host = instance->host; + + scsi_remove_host(instance->host); + megasas_flush_cache(instance); + megasas_shutdown_controller(instance); + + /* + * Take the instance off the instance array. Note that we will not + * decrement the max_index. We let this array be sparse array + */ + for (i = 0; i < megasas_mgmt_info.max_index; i++) { + if (megasas_mgmt_info.instance[i] == instance) { + megasas_mgmt_info.count--; + megasas_mgmt_info.instance[i] = NULL; + + break; + } + } + + pci_set_drvdata(instance->pdev, NULL); + + megasas_disable_intr(instance->reg_set); + + free_irq(instance->pdev->irq, instance); + + megasas_release_mfi(instance); + + pci_free_consistent(pdev, sizeof(struct megasas_evt_detail), + instance->evt_detail, instance->evt_detail_h); + + pci_free_consistent(pdev, sizeof(u32), instance->producer, + instance->producer_h); + + pci_free_consistent(pdev, sizeof(u32), instance->consumer, + instance->consumer_h); + + scsi_host_put(host); + + pci_set_drvdata(pdev, NULL); + + pci_disable_device(pdev); + + return; +} + +/** + * megasas_shutdown - Shutdown entry point + * @device: Generic device structure + */ +static void megasas_shutdown(struct pci_dev *pdev) +{ + struct megasas_instance *instance = pci_get_drvdata(pdev); + megasas_flush_cache(instance); +} + +/** + * megasas_mgmt_open - char node "open" entry point + */ +static int megasas_mgmt_open(struct inode *inode, struct file *filep) +{ + /* + * Allow only those users with admin rights + */ + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + + return 0; +} + +/** + * megasas_mgmt_release - char node "release" entry point + */ +static int megasas_mgmt_release(struct inode *inode, struct file *filep) +{ + filep->private_data = NULL; + fasync_helper(-1, filep, 0, &megasas_async_queue); + + return 0; +} + +/** + * megasas_mgmt_fasync - Async notifier registration from applications + * + * This function adds the calling process to a driver global queue. When an + * event occurs, SIGIO will be sent to all processes in this queue. + */ +static int megasas_mgmt_fasync(int fd, struct file *filep, int mode) +{ + int rc; + + down(&megasas_async_queue_mutex); + + rc = fasync_helper(fd, filep, mode, &megasas_async_queue); + + up(&megasas_async_queue_mutex); + + if (rc >= 0) { + /* For sanity check when we get ioctl */ + filep->private_data = filep; + return 0; + } + + printk(KERN_DEBUG "megasas: fasync_helper failed [%d]\n", rc); + + return rc; +} + +/** + * megasas_mgmt_fw_ioctl - Issues management ioctls to FW + * @instance: Adapter soft state + * @argp: User's ioctl packet + */ +static int +megasas_mgmt_fw_ioctl(struct megasas_instance *instance, + struct megasas_iocpacket __user * user_ioc, + struct megasas_iocpacket *ioc) +{ + struct megasas_sge32 *kern_sge32; + struct megasas_cmd *cmd; + void *kbuff_arr[MAX_IOCTL_SGE]; + dma_addr_t buf_handle = 0; + int error = 0, i; + void *sense = NULL; + dma_addr_t sense_handle; + u32 *sense_ptr; + + memset(kbuff_arr, 0, sizeof(kbuff_arr)); + + if (ioc->sge_count > MAX_IOCTL_SGE) { + printk(KERN_DEBUG "megasas: SGE count [%d] > max limit [%d]\n", + ioc->sge_count, MAX_IOCTL_SGE); + return -EINVAL; + } + + cmd = megasas_get_cmd(instance); + if (!cmd) { + printk(KERN_DEBUG "megasas: Failed to get a cmd packet\n"); + return -ENOMEM; + } + + /* + * User's IOCTL packet has 2 frames (maximum). Copy those two + * frames into our cmd's frames. cmd->frame's context will get + * overwritten when we copy from user's frames. So set that value + * alone separately + */ + memcpy(cmd->frame, ioc->frame.raw, 2 * MEGAMFI_FRAME_SIZE); + cmd->frame->hdr.context = cmd->index; + + /* + * The management interface between applications and the fw uses + * MFI frames. E.g, RAID configuration changes, LD property changes + * etc are accomplishes through different kinds of MFI frames. The + * driver needs to care only about substituting user buffers with + * kernel buffers in SGLs. The location of SGL is embedded in the + * struct iocpacket itself. + */ + kern_sge32 = (struct megasas_sge32 *) + ((unsigned long)cmd->frame + ioc->sgl_off); + + /* + * For each user buffer, create a mirror buffer and copy in + */ + for (i = 0; i < ioc->sge_count; i++) { + kbuff_arr[i] = pci_alloc_consistent(instance->pdev, + ioc->sgl[i].iov_len, + &buf_handle); + if (!kbuff_arr[i]) { + printk(KERN_DEBUG "megasas: Failed to alloc " + "kernel SGL buffer for IOCTL \n"); + error = -ENOMEM; + goto out; + } + + /* + * We don't change the dma_coherent_mask, so + * pci_alloc_consistent only returns 32bit addresses + */ + kern_sge32[i].phys_addr = (u32) buf_handle; + kern_sge32[i].length = ioc->sgl[i].iov_len; + + /* + * We created a kernel buffer corresponding to the + * user buffer. Now copy in from the user buffer + */ + if (copy_from_user(kbuff_arr[i], ioc->sgl[i].iov_base, + (u32) (ioc->sgl[i].iov_len))) { + error = -EFAULT; + goto out; + } + } + + if (ioc->sense_len) { + sense = pci_alloc_consistent(instance->pdev, ioc->sense_len, + &sense_handle); + if (!sense) { + error = -ENOMEM; + goto out; + } + + sense_ptr = + (u32 *) ((unsigned long)cmd->frame + ioc->sense_off); + *sense_ptr = sense_handle; + } + + /* + * Set the sync_cmd flag so that the ISR knows not to complete this + * cmd to the SCSI mid-layer + */ + cmd->sync_cmd = 1; + megasas_issue_blocked_cmd(instance, cmd); + cmd->sync_cmd = 0; + + /* + * copy out the kernel buffers to user buffers + */ + for (i = 0; i < ioc->sge_count; i++) { + if (copy_to_user(ioc->sgl[i].iov_base, kbuff_arr[i], + ioc->sgl[i].iov_len)) { + error = -EFAULT; + goto out; + } + } + + /* + * copy out the sense + */ + if (ioc->sense_len) { + /* + * sense_ptr points to the location that has the user + * sense buffer address + */ + sense_ptr = (u32 *) ((unsigned long)ioc->frame.raw + + ioc->sense_off); + + if (copy_to_user((void __user *)((unsigned long)(*sense_ptr)), + sense, ioc->sense_len)) { + error = -EFAULT; + goto out; + } + } + + /* + * copy the status codes returned by the fw + */ + if (copy_to_user(&user_ioc->frame.hdr.cmd_status, + &cmd->frame->hdr.cmd_status, sizeof(u8))) { + printk(KERN_DEBUG "megasas: Error copying out cmd_status\n"); + error = -EFAULT; + } + + out: + if (sense) { + pci_free_consistent(instance->pdev, ioc->sense_len, + sense, sense_handle); + } + + for (i = 0; i < ioc->sge_count && kbuff_arr[i]; i++) { + pci_free_consistent(instance->pdev, + kern_sge32[i].length, + kbuff_arr[i], kern_sge32[i].phys_addr); + } + + megasas_return_cmd(instance, cmd); + return error; +} + +static struct megasas_instance *megasas_lookup_instance(u16 host_no) +{ + int i; + + for (i = 0; i < megasas_mgmt_info.max_index; i++) { + + if ((megasas_mgmt_info.instance[i]) && + (megasas_mgmt_info.instance[i]->host->host_no == host_no)) + return megasas_mgmt_info.instance[i]; + } + + return NULL; +} + +static int megasas_mgmt_ioctl_fw(struct file *file, unsigned long arg) +{ + struct megasas_iocpacket __user *user_ioc = + (struct megasas_iocpacket __user *)arg; + struct megasas_iocpacket *ioc; + struct megasas_instance *instance; + int error; + + ioc = kmalloc(sizeof(*ioc), GFP_KERNEL); + if (!ioc) + return -ENOMEM; + + if (copy_from_user(ioc, user_ioc, sizeof(*ioc))) { + error = -EFAULT; + goto out_kfree_ioc; + } + + instance = megasas_lookup_instance(ioc->host_no); + if (!instance) { + error = -ENODEV; + goto out_kfree_ioc; + } + + /* + * We will allow only MEGASAS_INT_CMDS number of parallel ioctl cmds + */ + if (down_interruptible(&instance->ioctl_sem)) { + error = -ERESTARTSYS; + goto out_kfree_ioc; + } + error = megasas_mgmt_fw_ioctl(instance, user_ioc, ioc); + up(&instance->ioctl_sem); + + out_kfree_ioc: + kfree(ioc); + return error; +} + +static int megasas_mgmt_ioctl_aen(struct file *file, unsigned long arg) +{ + struct megasas_instance *instance; + struct megasas_aen aen; + int error; + + if (file->private_data != file) { + printk(KERN_DEBUG "megasas: fasync_helper was not " + "called first\n"); + return -EINVAL; + } + + if (copy_from_user(&aen, (void __user *)arg, sizeof(aen))) + return -EFAULT; + + instance = megasas_lookup_instance(aen.host_no); + + if (!instance) + return -ENODEV; + + down(&instance->aen_mutex); + error = megasas_register_aen(instance, aen.seq_num, + aen.class_locale_word); + up(&instance->aen_mutex); + return error; +} + +/** + * megasas_mgmt_ioctl - char node ioctl entry point + */ +static long +megasas_mgmt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + switch (cmd) { + case MEGASAS_IOC_FIRMWARE: + return megasas_mgmt_ioctl_fw(file, arg); + + case MEGASAS_IOC_GET_AEN: + return megasas_mgmt_ioctl_aen(file, arg); + } + + return -ENOTTY; +} + +#ifdef CONFIG_COMPAT +static int megasas_mgmt_compat_ioctl_fw(struct file *file, unsigned long arg) +{ + struct compat_megasas_iocpacket __user *cioc = + (struct compat_megasas_iocpacket __user *)arg; + struct megasas_iocpacket __user *ioc = + compat_alloc_user_space(sizeof(struct megasas_iocpacket)); + int i; + int error = 0; + + clear_user(ioc, sizeof(*ioc)); + + if (copy_in_user(&ioc->host_no, &cioc->host_no, sizeof(u16)) || + copy_in_user(&ioc->sgl_off, &cioc->sgl_off, sizeof(u32)) || + copy_in_user(&ioc->sense_off, &cioc->sense_off, sizeof(u32)) || + copy_in_user(&ioc->sense_len, &cioc->sense_len, sizeof(u32)) || + copy_in_user(ioc->frame.raw, cioc->frame.raw, 128) || + copy_in_user(&ioc->sge_count, &cioc->sge_count, sizeof(u32))) + return -EFAULT; + + for (i = 0; i < MAX_IOCTL_SGE; i++) { + compat_uptr_t ptr; + + if (get_user(ptr, &cioc->sgl[i].iov_base) || + put_user(compat_ptr(ptr), &ioc->sgl[i].iov_base) || + copy_in_user(&ioc->sgl[i].iov_len, + &cioc->sgl[i].iov_len, sizeof(compat_size_t))) + return -EFAULT; + } + + error = megasas_mgmt_ioctl_fw(file, (unsigned long)ioc); + + if (copy_in_user(&cioc->frame.hdr.cmd_status, + &ioc->frame.hdr.cmd_status, sizeof(u8))) { + printk(KERN_DEBUG "megasas: error copy_in_user cmd_status\n"); + return -EFAULT; + } + return error; +} + +static long +megasas_mgmt_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + switch (cmd) { + case MEGASAS_IOC_FIRMWARE:{ + return megasas_mgmt_compat_ioctl_fw(file, arg); + } + case MEGASAS_IOC_GET_AEN: + return megasas_mgmt_ioctl_aen(file, arg); + } + + return -ENOTTY; +} +#endif + +/* + * File operations structure for management interface + */ +static struct file_operations megasas_mgmt_fops = { + .owner = THIS_MODULE, + .open = megasas_mgmt_open, + .release = megasas_mgmt_release, + .fasync = megasas_mgmt_fasync, + .unlocked_ioctl = megasas_mgmt_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = megasas_mgmt_compat_ioctl, +#endif +}; + +/* + * PCI hotplug support registration structure + */ +static struct pci_driver megasas_pci_driver = { + + .name = "megaraid_sas", + .id_table = megasas_pci_table, + .probe = megasas_probe_one, + .remove = __devexit_p(megasas_detach_one), + .shutdown = megasas_shutdown, +}; + +/* + * Sysfs driver attributes + */ +static ssize_t megasas_sysfs_show_version(struct device_driver *dd, char *buf) +{ + return snprintf(buf, strlen(MEGASAS_VERSION) + 2, "%s\n", + MEGASAS_VERSION); +} + +static DRIVER_ATTR(version, S_IRUGO, megasas_sysfs_show_version, NULL); + +static ssize_t +megasas_sysfs_show_release_date(struct device_driver *dd, char *buf) +{ + return snprintf(buf, strlen(MEGASAS_RELDATE) + 2, "%s\n", + MEGASAS_RELDATE); +} + +static DRIVER_ATTR(release_date, S_IRUGO, megasas_sysfs_show_release_date, + NULL); + +/** + * megasas_init - Driver load entry point + */ +static int __init megasas_init(void) +{ + int rval; + + /* + * Announce driver version and other information + */ + printk(KERN_INFO "megasas: %s %s\n", MEGASAS_VERSION, + MEGASAS_EXT_VERSION); + + memset(&megasas_mgmt_info, 0, sizeof(megasas_mgmt_info)); + + /* + * Register character device node + */ + rval = register_chrdev(0, "megaraid_sas_ioctl", &megasas_mgmt_fops); + + if (rval < 0) { + printk(KERN_DEBUG "megasas: failed to open device node\n"); + return rval; + } + + megasas_mgmt_majorno = rval; + + /* + * Register ourselves as PCI hotplug module + */ + rval = pci_module_init(&megasas_pci_driver); + + if (rval) { + printk(KERN_DEBUG "megasas: PCI hotplug regisration failed \n"); + unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl"); + } + + driver_create_file(&megasas_pci_driver.driver, &driver_attr_version); + driver_create_file(&megasas_pci_driver.driver, + &driver_attr_release_date); + + return rval; +} + +/** + * megasas_exit - Driver unload entry point + */ +static void __exit megasas_exit(void) +{ + driver_remove_file(&megasas_pci_driver.driver, &driver_attr_version); + driver_remove_file(&megasas_pci_driver.driver, + &driver_attr_release_date); + + pci_unregister_driver(&megasas_pci_driver); + unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl"); +} + +module_init(megasas_init); +module_exit(megasas_exit); |