diff options
Diffstat (limited to 'drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h')
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h | 193 |
1 files changed, 171 insertions, 22 deletions
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h index d4e9d6f8452..e3728d736d8 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h @@ -6,7 +6,7 @@ * Title: MPI Configuration messages and pages * Creation Date: November 10, 2006 * - * mpi2_cnfg.h Version: 02.00.13 + * mpi2_cnfg.h Version: 02.00.14 * * Version History * --------------- @@ -109,6 +109,18 @@ * Added Ethernet configuration pages. * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY. * Added SAS PHY Page 4 structure and defines. + * 02-10-10 02.00.14 Modified the comments for the configuration page + * structures that contain an array of data. The host + * should use the "count" field in the page data (e.g. the + * NumPhys field) to determine the number of valid elements + * in the array. + * Added/modified some MPI2_MFGPAGE_DEVID_SAS defines. + * Added PowerManagementCapabilities to IO Unit Page 7. + * Added PortWidthModGroup field to + * MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS. + * Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines. + * Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines. + * Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines. * -------------------------------------------------------------------------- */ @@ -373,8 +385,9 @@ typedef struct _MPI2_CONFIG_REPLY #define MPI2_MFGPAGE_DEVID_SAS2208_4 (0x0083) #define MPI2_MFGPAGE_DEVID_SAS2208_5 (0x0084) #define MPI2_MFGPAGE_DEVID_SAS2208_6 (0x0085) -#define MPI2_MFGPAGE_DEVID_SAS2208_7 (0x0086) -#define MPI2_MFGPAGE_DEVID_SAS2208_8 (0x0087) +#define MPI2_MFGPAGE_DEVID_SAS2308_1 (0x0086) +#define MPI2_MFGPAGE_DEVID_SAS2308_2 (0x0087) +#define MPI2_MFGPAGE_DEVID_SAS2308_3 (0x006E) /* Manufacturing Page 0 */ @@ -540,7 +553,7 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_4 /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength or NumPhys at runtime. + * one and check the value returned for NumPhys at runtime. */ #ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES #define MPI2_MAN_PAGE_5_PHY_ENTRIES (1) @@ -618,7 +631,7 @@ typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check NumPhys at runtime. + * one and check the value returned for NumPhys at runtime. */ #ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX #define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1) @@ -731,7 +744,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength at runtime. + * one and check the value returned for GPIOCount at runtime. */ #ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX #define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1) @@ -760,7 +773,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 /* * Upper layer code (drivers, utilities, etc.) should leave this define set to - * one and check Header.PageLength or NumDmaEngines at runtime. + * one and check the value returned for NumDmaEngines at runtime. */ #ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES #define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1) @@ -823,7 +836,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 { U8 PCIeWidth; /* 0x06 */ U8 PCIeSpeed; /* 0x07 */ U32 ProcessorState; /* 0x08 */ - U32 Reserved2; /* 0x0C */ + U32 PowerManagementCapabilities; /* 0x0C */ U16 IOCTemperature; /* 0x10 */ U8 IOCTemperatureUnits; /* 0x12 */ U8 IOCSpeed; /* 0x13 */ @@ -831,7 +844,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 { } MPI2_CONFIG_PAGE_IO_UNIT_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_7, Mpi2IOUnitPage7_t, MPI2_POINTER pMpi2IOUnitPage7_t; -#define MPI2_IOUNITPAGE7_PAGEVERSION (0x00) +#define MPI2_IOUNITPAGE7_PAGEVERSION (0x01) /* defines for IO Unit Page 7 PCIeWidth field */ #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1 (0x01) @@ -852,6 +865,14 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 { #define MPI2_IOUNITPAGE7_PSTATE_DISABLED (0x01) #define MPI2_IOUNITPAGE7_PSTATE_ENABLED (0x02) +/* defines for IO Unit Page 7 PowerManagementCapabilities field */ +#define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED (0x00000400) +#define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED (0x00000200) +#define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED (0x00000100) +#define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE (0x00000008) +#define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE (0x00000004) + + /* defines for IO Unit Page 7 IOCTemperatureUnits field */ #define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT (0x00) #define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT (0x01) @@ -1195,7 +1216,7 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_3 /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength or NumPhys at runtime. + * one and check the value returned for NumPhys at runtime. */ #ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES #define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1) @@ -1269,7 +1290,7 @@ typedef struct _MPI2_RAIDVOL0_SETTINGS /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength at runtime. + * one and check the value returned for NumPhysDisks at runtime. */ #ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX #define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1) @@ -1471,7 +1492,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.PageLength or NumPhysDiskPaths at runtime. + * one and check the value returned for NumPhysDiskPaths at runtime. */ #ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX #define MPI2_RAID_PHYS_DISK1_PATH_MAX (1) @@ -1633,7 +1654,7 @@ typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.ExtPageLength or NumPhys at runtime. + * one and check the value returned for NumPhys at runtime. */ #ifndef MPI2_SAS_IOUNIT0_PHY_MAX #define MPI2_SAS_IOUNIT0_PHY_MAX (1) @@ -1704,7 +1725,7 @@ typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.ExtPageLength or NumPhys at runtime. + * one and check the value returned for NumPhys at runtime. */ #ifndef MPI2_SAS_IOUNIT1_PHY_MAX #define MPI2_SAS_IOUNIT1_PHY_MAX (1) @@ -1795,7 +1816,7 @@ typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * four and check Header.ExtPageLength or NumPhys at runtime. + * one and check the value returned for NumPhys at runtime. */ #ifndef MPI2_SAS_IOUNIT4_PHY_MAX #define MPI2_SAS_IOUNIT4_PHY_MAX (4) @@ -1833,7 +1854,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4 typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS { U8 ControlFlags; /* 0x00 */ - U8 Reserved1; /* 0x01 */ + U8 PortWidthModGroup; /* 0x01 */ U16 InactivityTimerExponent; /* 0x02 */ U8 SATAPartialTimeout; /* 0x04 */ U8 Reserved2; /* 0x05 */ @@ -1853,6 +1874,9 @@ typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS { #define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE (0x02) #define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE (0x01) +/* defines for PortWidthModeGroup field */ +#define MPI2_SASIOUNIT5_PWMG_DISABLE (0xFF) + /* defines for InactivityTimerExponent field */ #define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER (0x7000) #define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER (12) @@ -1874,7 +1898,7 @@ typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS { /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.ExtPageLength or NumPhys at runtime. + * one and check the value returned for NumPhys at runtime. */ #ifndef MPI2_SAS_IOUNIT5_PHY_MAX #define MPI2_SAS_IOUNIT5_PHY_MAX (1) @@ -1892,7 +1916,132 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 { MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5, Mpi2SasIOUnitPage5_t, MPI2_POINTER pMpi2SasIOUnitPage5_t; -#define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x00) +#define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x01) + + +/* SAS IO Unit Page 6 */ + +typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS { + U8 CurrentStatus; /* 0x00 */ + U8 CurrentModulation; /* 0x01 */ + U8 CurrentUtilization; /* 0x02 */ + U8 Reserved1; /* 0x03 */ + U32 Reserved2; /* 0x04 */ +} MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS, + MPI2_POINTER PTR_MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS, + Mpi2SasIOUnit6PortWidthModGroupStatus_t, + MPI2_POINTER pMpi2SasIOUnit6PortWidthModGroupStatus_t; + +/* defines for CurrentStatus field */ +#define MPI2_SASIOUNIT6_STATUS_UNAVAILABLE (0x00) +#define MPI2_SASIOUNIT6_STATUS_UNCONFIGURED (0x01) +#define MPI2_SASIOUNIT6_STATUS_INVALID_CONFIG (0x02) +#define MPI2_SASIOUNIT6_STATUS_LINK_DOWN (0x03) +#define MPI2_SASIOUNIT6_STATUS_OBSERVATION_ONLY (0x04) +#define MPI2_SASIOUNIT6_STATUS_INACTIVE (0x05) +#define MPI2_SASIOUNIT6_STATUS_ACTIVE_IOUNIT (0x06) +#define MPI2_SASIOUNIT6_STATUS_ACTIVE_HOST (0x07) + +/* defines for CurrentModulation field */ +#define MPI2_SASIOUNIT6_MODULATION_25_PERCENT (0x00) +#define MPI2_SASIOUNIT6_MODULATION_50_PERCENT (0x01) +#define MPI2_SASIOUNIT6_MODULATION_75_PERCENT (0x02) +#define MPI2_SASIOUNIT6_MODULATION_100_PERCENT (0x03) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check the value returned for NumGroups at runtime. + */ +#ifndef MPI2_SAS_IOUNIT6_GROUP_MAX +#define MPI2_SAS_IOUNIT6_GROUP_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U32 Reserved2; /* 0x0C */ + U8 NumGroups; /* 0x10 */ + U8 Reserved3; /* 0x11 */ + U16 Reserved4; /* 0x12 */ + MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS + PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /* 0x14 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_6, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6, + Mpi2SasIOUnitPage6_t, MPI2_POINTER pMpi2SasIOUnitPage6_t; + +#define MPI2_SASIOUNITPAGE6_PAGEVERSION (0x00) + + +/* SAS IO Unit Page 7 */ + +typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS { + U8 Flags; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U8 Threshold75Pct; /* 0x04 */ + U8 Threshold50Pct; /* 0x05 */ + U8 Threshold25Pct; /* 0x06 */ + U8 Reserved3; /* 0x07 */ +} MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS, + MPI2_POINTER PTR_MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS, + Mpi2SasIOUnit7PortWidthModGroupSettings_t, + MPI2_POINTER pMpi2SasIOUnit7PortWidthModGroupSettings_t; + +/* defines for Flags field */ +#define MPI2_SASIOUNIT7_FLAGS_ENABLE_PORT_WIDTH_MODULATION (0x01) + + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check the value returned for NumGroups at runtime. + */ +#ifndef MPI2_SAS_IOUNIT7_GROUP_MAX +#define MPI2_SAS_IOUNIT7_GROUP_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U8 SamplingInterval; /* 0x08 */ + U8 WindowLength; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U32 Reserved2; /* 0x0C */ + U32 Reserved3; /* 0x10 */ + U8 NumGroups; /* 0x14 */ + U8 Reserved4; /* 0x15 */ + U16 Reserved5; /* 0x16 */ + MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS + PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX]; /* 0x18 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_7, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7, + Mpi2SasIOUnitPage7_t, MPI2_POINTER pMpi2SasIOUnitPage7_t; + +#define MPI2_SASIOUNITPAGE7_PAGEVERSION (0x00) + + +/* SAS IO Unit Page 8 */ + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U32 PowerManagementCapabilities;/* 0x0C */ + U32 Reserved2; /* 0x10 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_8, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_8, + Mpi2SasIOUnitPage8_t, MPI2_POINTER pMpi2SasIOUnitPage8_t; + +#define MPI2_SASIOUNITPAGE8_PAGEVERSION (0x00) + +/* defines for PowerManagementCapabilities field */ +#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x000001000) +#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x000000800) +#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x000000400) +#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x000000200) +#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x000000100) +#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x000000010) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x000000008) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x000000004) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x000000002) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x000000001) @@ -2182,7 +2331,7 @@ typedef struct _MPI2_SASPHY2_PHY_EVENT { /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.ExtPageLength or NumPhyEvents at runtime. + * one and check the value returned for NumPhyEvents at runtime. */ #ifndef MPI2_SASPHY2_PHY_EVENT_MAX #define MPI2_SASPHY2_PHY_EVENT_MAX (1) @@ -2274,7 +2423,7 @@ typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG { /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.ExtPageLength or NumPhyEvents at runtime. + * one and check the value returned for NumPhyEvents at runtime. */ #ifndef MPI2_SASPHY3_PHY_EVENT_MAX #define MPI2_SASPHY3_PHY_EVENT_MAX (1) @@ -2385,7 +2534,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.ExtPageLength or NumPhys at runtime. + * one and check the value returned for NumLogEntries at runtime. */ #ifndef MPI2_LOG_0_NUM_LOG_ENTRIES #define MPI2_LOG_0_NUM_LOG_ENTRIES (1) @@ -2435,7 +2584,7 @@ typedef struct _MPI2_CONFIG_PAGE_LOG_0 /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to - * one and check Header.ExtPageLength or NumPhys at runtime. + * one and check the value returned for NumElements at runtime. */ #ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS #define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1) |