diff options
Diffstat (limited to 'drivers/scsi/mpt2sas/mpt2sas_base.c')
-rw-r--r-- | drivers/scsi/mpt2sas/mpt2sas_base.c | 84 |
1 files changed, 42 insertions, 42 deletions
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index efa0255491c..83035bd1c48 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -94,7 +94,7 @@ module_param(diag_buffer_enable, int, 0); MODULE_PARM_DESC(diag_buffer_enable, " post diag buffers " "(TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)"); -int mpt2sas_fwfault_debug; +static int mpt2sas_fwfault_debug; MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault " "and halt firmware - (default=0)"); @@ -857,7 +857,7 @@ _base_interrupt(int irq, void *bus_id) completed_cmds = 0; cb_idx = 0xFF; do { - rd.word = rpf->Words; + rd.word = le64_to_cpu(rpf->Words); if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX) goto out; reply = 0; @@ -906,7 +906,7 @@ _base_interrupt(int irq, void *bus_id) next: - rpf->Words = ULLONG_MAX; + rpf->Words = cpu_to_le64(ULLONG_MAX); ioc->reply_post_host_index = (ioc->reply_post_host_index == (ioc->reply_post_queue_depth - 1)) ? 0 : ioc->reply_post_host_index + 1; @@ -1740,9 +1740,11 @@ _base_display_dell_branding(struct MPT2SAS_ADAPTER *ioc) static void _base_display_intel_branding(struct MPT2SAS_ADAPTER *ioc) { - if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_INTEL && - ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008) { + if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_INTEL) + return; + switch (ioc->pdev->device) { + case MPI2_MFGPAGE_DEVID_SAS2008: switch (ioc->pdev->subsystem_device) { case MPT2SAS_INTEL_RMS2LL080_SSDID: printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, @@ -1752,7 +1754,20 @@ _base_display_intel_branding(struct MPT2SAS_ADAPTER *ioc) printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, MPT2SAS_INTEL_RMS2LL040_BRANDING); break; + default: + break; + } + case MPI2_MFGPAGE_DEVID_SAS2308_2: + switch (ioc->pdev->subsystem_device) { + case MPT2SAS_INTEL_RS25GB008_SSDID: + printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, + MPT2SAS_INTEL_RS25GB008_BRANDING); + break; + default: + break; } + default: + break; } } @@ -1817,7 +1832,9 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc) char desc[16]; u8 revision; u32 iounit_pg1_flags; + u32 bios_version; + bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion); pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision); strncpy(desc, ioc->manu_pg0.ChipName, 16); printk(MPT2SAS_INFO_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), " @@ -1828,10 +1845,10 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc) (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8, ioc->facts.FWVersion.Word & 0x000000FF, revision, - (ioc->bios_pg3.BiosVersion & 0xFF000000) >> 24, - (ioc->bios_pg3.BiosVersion & 0x00FF0000) >> 16, - (ioc->bios_pg3.BiosVersion & 0x0000FF00) >> 8, - ioc->bios_pg3.BiosVersion & 0x000000FF); + (bios_version & 0xFF000000) >> 24, + (bios_version & 0x00FF0000) >> 16, + (bios_version & 0x0000FF00) >> 8, + bios_version & 0x000000FF); _base_display_dell_branding(ioc); _base_display_intel_branding(ioc); @@ -2150,7 +2167,7 @@ _base_release_memory_pools(struct MPT2SAS_ADAPTER *ioc) static int _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) { - Mpi2IOCFactsReply_t *facts; + struct mpt2sas_facts *facts; u32 queue_size, queue_diff; u16 max_sge_elements; u16 num_of_reply_frames; @@ -2783,7 +2800,7 @@ _base_handshake_req_reply_wait(struct MPT2SAS_ADAPTER *ioc, int request_bytes, int i; u8 failed; u16 dummy; - u32 *mfp; + __le32 *mfp; /* make sure doorbell is not in use */ if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) { @@ -2871,7 +2888,7 @@ _base_handshake_req_reply_wait(struct MPT2SAS_ADAPTER *ioc, int request_bytes, writel(0, &ioc->chip->HostInterruptStatus); if (ioc->logging_level & MPT_DEBUG_INIT) { - mfp = (u32 *)reply; + mfp = (__le32 *)reply; printk(KERN_INFO "\toffset:data\n"); for (i = 0; i < reply_bytes/4; i++) printk(KERN_INFO "\t[0x%02x]:%08x\n", i*4, @@ -3097,7 +3114,8 @@ static int _base_get_port_facts(struct MPT2SAS_ADAPTER *ioc, int port, int sleep_flag) { Mpi2PortFactsRequest_t mpi_request; - Mpi2PortFactsReply_t mpi_reply, *pfacts; + Mpi2PortFactsReply_t mpi_reply; + struct mpt2sas_port_facts *pfacts; int mpi_reply_sz, mpi_request_sz, r; dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, @@ -3139,7 +3157,8 @@ static int _base_get_ioc_facts(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) { Mpi2IOCFactsRequest_t mpi_request; - Mpi2IOCFactsReply_t mpi_reply, *facts; + Mpi2IOCFactsReply_t mpi_reply; + struct mpt2sas_facts *facts; int mpi_reply_sz, mpi_request_sz, r; dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, @@ -3225,17 +3244,6 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) mpi_request.MsgVersion = cpu_to_le16(MPI2_VERSION); mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION); - /* In MPI Revision I (0xA), the SystemReplyFrameSize(offset 0x18) was - * removed and made reserved. For those with older firmware will need - * this fix. It was decided that the Reply and Request frame sizes are - * the same. - */ - if ((ioc->facts.HeaderVersion >> 8) < 0xA) { - mpi_request.Reserved7 = cpu_to_le16(ioc->reply_sz); -/* mpi_request.SystemReplyFrameSize = - * cpu_to_le16(ioc->reply_sz); - */ - } mpi_request.SystemRequestFrameSize = cpu_to_le16(ioc->request_sz/4); mpi_request.ReplyDescriptorPostQueueDepth = @@ -3243,25 +3251,17 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) mpi_request.ReplyFreeQueueDepth = cpu_to_le16(ioc->reply_free_queue_depth); -#if BITS_PER_LONG > 32 mpi_request.SenseBufferAddressHigh = - cpu_to_le32(ioc->sense_dma >> 32); + cpu_to_le32((u64)ioc->sense_dma >> 32); mpi_request.SystemReplyAddressHigh = - cpu_to_le32(ioc->reply_dma >> 32); + cpu_to_le32((u64)ioc->reply_dma >> 32); mpi_request.SystemRequestFrameBaseAddress = - cpu_to_le64(ioc->request_dma); + cpu_to_le64((u64)ioc->request_dma); mpi_request.ReplyFreeQueueAddress = - cpu_to_le64(ioc->reply_free_dma); + cpu_to_le64((u64)ioc->reply_free_dma); mpi_request.ReplyDescriptorPostQueueAddress = - cpu_to_le64(ioc->reply_post_free_dma); -#else - mpi_request.SystemRequestFrameBaseAddress = - cpu_to_le32(ioc->request_dma); - mpi_request.ReplyFreeQueueAddress = - cpu_to_le32(ioc->reply_free_dma); - mpi_request.ReplyDescriptorPostQueueAddress = - cpu_to_le32(ioc->reply_post_free_dma); -#endif + cpu_to_le64((u64)ioc->reply_post_free_dma); + /* This time stamp specifies number of milliseconds * since epoch ~ midnight January 1, 1970. @@ -3271,10 +3271,10 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) (current_time.tv_usec / 1000)); if (ioc->logging_level & MPT_DEBUG_INIT) { - u32 *mfp; + __le32 *mfp; int i; - mfp = (u32 *)&mpi_request; + mfp = (__le32 *)&mpi_request; printk(KERN_INFO "\toffset:data\n"); for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++) printk(KERN_INFO "\t[0x%02x]:%08x\n", i*4, @@ -3759,7 +3759,7 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) /* initialize Reply Post Free Queue */ for (i = 0; i < ioc->reply_post_queue_depth; i++) - ioc->reply_post_free[i].Words = ULLONG_MAX; + ioc->reply_post_free[i].Words = cpu_to_le64(ULLONG_MAX); r = _base_send_ioc_init(ioc, sleep_flag); if (r) |