summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/mpt2sas/mpt2sas_scsih.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/mpt2sas/mpt2sas_scsih.c')
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_scsih.c819
1 files changed, 559 insertions, 260 deletions
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 86ab32d7ab1..55ee014a7e0 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -76,6 +76,7 @@ static u8 tm_cb_idx = -1;
static u8 ctl_cb_idx = -1;
static u8 base_cb_idx = -1;
static u8 transport_cb_idx = -1;
+static u8 scsih_cb_idx = -1;
static u8 config_cb_idx = -1;
static int mpt_ids;
@@ -196,10 +197,28 @@ static struct pci_device_id scsih_pci_table[] = {
PCI_ANY_ID, PCI_ANY_ID },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_3,
PCI_ANY_ID, PCI_ANY_ID },
+ /* Meteor ~ 2116 */
{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_1,
PCI_ANY_ID, PCI_ANY_ID },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_2,
PCI_ANY_ID, PCI_ANY_ID },
+ /* Thunderbolt ~ 2208 */
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_1,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_2,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_3,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_4,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_5,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_6,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_7,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_8,
+ PCI_ANY_ID, PCI_ANY_ID },
{0} /* Terminating entry */
};
MODULE_DEVICE_TABLE(pci, scsih_pci_table);
@@ -317,6 +336,47 @@ _scsih_is_boot_device(u64 sas_address, u64 device_name,
}
/**
+ * _scsih_get_sas_address - set the sas_address for given device handle
+ * @handle: device handle
+ * @sas_address: sas address
+ *
+ * Returns 0 success, non-zero when failure
+ */
+static int
+_scsih_get_sas_address(struct MPT2SAS_ADAPTER *ioc, u16 handle,
+ u64 *sas_address)
+{
+ Mpi2SasDevicePage0_t sas_device_pg0;
+ Mpi2ConfigReply_t mpi_reply;
+ u32 ioc_status;
+
+ if (handle <= ioc->sas_hba.num_phys) {
+ *sas_address = ioc->sas_hba.sas_address;
+ return 0;
+ } else
+ *sas_address = 0;
+
+ if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+ MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return -ENXIO;
+ }
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x)"
+ "\nfailure at %s:%d/%s()!\n", ioc->name, handle, ioc_status,
+ __FILE__, __LINE__, __func__);
+ return -EIO;
+ }
+
+ *sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+ return 0;
+}
+
+/**
* _scsih_determine_boot_device - determine boot device.
* @ioc: per adapter object
* @device: either sas_device or raid_device object
@@ -510,8 +570,6 @@ _scsih_sas_device_add(struct MPT2SAS_ADAPTER *ioc,
struct _sas_device *sas_device)
{
unsigned long flags;
- u16 handle, parent_handle;
- u64 sas_address;
dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle"
"(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__,
@@ -521,10 +579,8 @@ _scsih_sas_device_add(struct MPT2SAS_ADAPTER *ioc,
list_add_tail(&sas_device->list, &ioc->sas_device_list);
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- handle = sas_device->handle;
- parent_handle = sas_device->parent_handle;
- sas_address = sas_device->sas_address;
- if (!mpt2sas_transport_port_add(ioc, handle, parent_handle))
+ if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
+ sas_device->sas_address_parent))
_scsih_sas_device_remove(ioc, sas_device);
}
@@ -553,31 +609,6 @@ _scsih_sas_device_init_add(struct MPT2SAS_ADAPTER *ioc,
}
/**
- * mpt2sas_scsih_expander_find_by_handle - expander device search
- * @ioc: per adapter object
- * @handle: expander handle (assigned by firmware)
- * Context: Calling function should acquire ioc->sas_device_lock
- *
- * This searches for expander device based on handle, then returns the
- * sas_node object.
- */
-struct _sas_node *
-mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
- struct _sas_node *sas_expander, *r;
-
- r = NULL;
- list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
- if (sas_expander->handle != handle)
- continue;
- r = sas_expander;
- goto out;
- }
- out:
- return r;
-}
-
-/**
* _scsih_raid_device_find_by_id - raid device search
* @ioc: per adapter object
* @id: sas device target id
@@ -699,6 +730,31 @@ _scsih_raid_device_remove(struct MPT2SAS_ADAPTER *ioc,
}
/**
+ * mpt2sas_scsih_expander_find_by_handle - expander device search
+ * @ioc: per adapter object
+ * @handle: expander handle (assigned by firmware)
+ * Context: Calling function should acquire ioc->sas_device_lock
+ *
+ * This searches for expander device based on handle, then returns the
+ * sas_node object.
+ */
+struct _sas_node *
+mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
+{
+ struct _sas_node *sas_expander, *r;
+
+ r = NULL;
+ list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
+ if (sas_expander->handle != handle)
+ continue;
+ r = sas_expander;
+ goto out;
+ }
+ out:
+ return r;
+}
+
+/**
* mpt2sas_scsih_expander_find_by_sas_address - expander device search
* @ioc: per adapter object
* @sas_address: sas address
@@ -1043,17 +1099,46 @@ _scsih_build_scatter_gather(struct MPT2SAS_ADAPTER *ioc,
* _scsih_change_queue_depth - setting device queue depth
* @sdev: scsi device struct
* @qdepth: requested queue depth
+ * @reason: calling context
*
* Returns queue depth.
*/
static int
-_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
+_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
{
struct Scsi_Host *shost = sdev->host;
int max_depth;
int tag_type;
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+ struct MPT2SAS_DEVICE *sas_device_priv_data;
+ struct MPT2SAS_TARGET *sas_target_priv_data;
+ struct _sas_device *sas_device;
+ unsigned long flags;
+
+ if (reason != SCSI_QDEPTH_DEFAULT)
+ return -EOPNOTSUPP;
max_depth = shost->can_queue;
+
+ /* limit max device queue for SATA to 32 */
+ sas_device_priv_data = sdev->hostdata;
+ if (!sas_device_priv_data)
+ goto not_sata;
+ sas_target_priv_data = sas_device_priv_data->sas_target;
+ if (!sas_target_priv_data)
+ goto not_sata;
+ if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))
+ goto not_sata;
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
+ sas_device_priv_data->sas_target->sas_address);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ if (sas_device && sas_device->device_info &
+ MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
+ max_depth = MPT2SAS_SATA_QUEUE_DEPTH;
+
+ not_sata:
+
if (!sdev->tagged_supported)
max_depth = 1;
if (qdepth > max_depth)
@@ -1488,7 +1573,7 @@ _scsih_slave_configure(struct scsi_device *sdev)
r_level, raid_device->handle,
(unsigned long long)raid_device->wwid,
raid_device->num_pds, ds);
- _scsih_change_queue_depth(sdev, qdepth);
+ _scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT);
return 0;
}
@@ -1534,7 +1619,7 @@ _scsih_slave_configure(struct scsi_device *sdev)
_scsih_display_sata_capabilities(ioc, sas_device, sdev);
}
- _scsih_change_queue_depth(sdev, qdepth);
+ _scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT);
if (ssp_target)
sas_read_port_mode_page(sdev);
@@ -1874,6 +1959,8 @@ _scsih_abort(struct scsi_cmnd *scmd)
goto out;
}
+ mpt2sas_halt_firmware(ioc);
+
mutex_lock(&ioc->tm_cmds.mutex);
handle = sas_device_priv_data->sas_target->handle;
mpt2sas_scsih_issue_tm(ioc, handle, sas_device_priv_data->lun,
@@ -2297,7 +2384,6 @@ _scsih_block_io_to_children_attached_directly(struct MPT2SAS_ADAPTER *ioc,
u16 handle;
u16 reason_code;
u8 phy_number;
- u8 link_rate;
for (i = 0; i < event_data->NumEntries; i++) {
handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
@@ -2308,11 +2394,6 @@ _scsih_block_io_to_children_attached_directly(struct MPT2SAS_ADAPTER *ioc,
MPI2_EVENT_SAS_TOPO_RC_MASK;
if (reason_code == MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING)
_scsih_block_io_device(ioc, handle);
- if (reason_code == MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED) {
- link_rate = event_data->PHY[i].LinkRate >> 4;
- if (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)
- _scsih_ublock_io_device(ioc, handle);
- }
}
}
@@ -2349,16 +2430,10 @@ _scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle)
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
- if (!sas_device) {
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- printk(MPT2SAS_ERR_FMT "%s: failed finding sas_device\n",
- ioc->name, __func__);
- return;
- }
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
/* skip is hidden raid component */
- if (sas_device->hidden_raid_component)
+ if (sas_device && sas_device->hidden_raid_component)
return;
smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_cb_idx);
@@ -2371,18 +2446,31 @@ _scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle)
delayed_tr->state = MPT2SAS_REQ_SAS_CNTRL;
list_add_tail(&delayed_tr->list,
&ioc->delayed_tr_list);
- if (sas_device->starget)
+ if (sas_device && sas_device->starget) {
dewtprintk(ioc, starget_printk(KERN_INFO,
sas_device->starget, "DELAYED:tr:handle(0x%04x), "
- "(open)\n", sas_device->handle));
+ "(open)\n", handle));
+ } else {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
+ "DELAYED:tr:handle(0x%04x), (open)\n",
+ ioc->name, handle));
+ }
return;
}
- if (sas_device->starget && sas_device->starget->hostdata) {
- sas_target_priv_data = sas_device->starget->hostdata;
- sas_target_priv_data->tm_busy = 1;
- dewtprintk(ioc, starget_printk(KERN_INFO, sas_device->starget,
- "tr:handle(0x%04x), (open)\n", sas_device->handle));
+ if (sas_device) {
+ sas_device->state |= MPTSAS_STATE_TR_SEND;
+ sas_device->state |= MPT2SAS_REQ_SAS_CNTRL;
+ if (sas_device->starget && sas_device->starget->hostdata) {
+ sas_target_priv_data = sas_device->starget->hostdata;
+ sas_target_priv_data->tm_busy = 1;
+ dewtprintk(ioc, starget_printk(KERN_INFO,
+ sas_device->starget, "tr:handle(0x%04x), (open)\n",
+ handle));
+ }
+ } else {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
+ "tr:handle(0x%04x), (open)\n", ioc->name, handle));
}
mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
@@ -2390,8 +2478,6 @@ _scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle)
mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
mpi_request->DevHandle = cpu_to_le16(handle);
mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
- sas_device->state |= MPTSAS_STATE_TR_SEND;
- sas_device->state |= MPT2SAS_REQ_SAS_CNTRL;
mpt2sas_base_put_smid_hi_priority(ioc, smid);
}
@@ -2426,21 +2512,25 @@ _scsih_sas_control_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid,
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
- if (!sas_device) {
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- printk(MPT2SAS_ERR_FMT "%s: failed finding sas_device\n",
- ioc->name, __func__);
- return 1;
- }
- sas_device->state |= MPTSAS_STATE_CNTRL_COMPLETE;
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- if (sas_device->starget)
- dewtprintk(ioc, starget_printk(KERN_INFO, sas_device->starget,
+ if (sas_device) {
+ sas_device->state |= MPTSAS_STATE_CNTRL_COMPLETE;
+ if (sas_device->starget)
+ dewtprintk(ioc, starget_printk(KERN_INFO,
+ sas_device->starget,
+ "sc_complete:handle(0x%04x), "
+ "ioc_status(0x%04x), loginfo(0x%08x)\n",
+ handle, le16_to_cpu(mpi_reply->IOCStatus),
+ le32_to_cpu(mpi_reply->IOCLogInfo)));
+ } else {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
"sc_complete:handle(0x%04x), "
"ioc_status(0x%04x), loginfo(0x%08x)\n",
- handle, le16_to_cpu(mpi_reply->IOCStatus),
+ ioc->name, handle, le16_to_cpu(mpi_reply->IOCStatus),
le32_to_cpu(mpi_reply->IOCLogInfo)));
+ }
+
return 1;
}
@@ -2478,28 +2568,33 @@ _scsih_tm_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
handle = le16_to_cpu(mpi_reply->DevHandle);
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
- if (!sas_device) {
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- printk(MPT2SAS_ERR_FMT "%s: failed finding sas_device\n",
- ioc->name, __func__);
- return 1;
- }
- sas_device->state |= MPTSAS_STATE_TR_COMPLETE;
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- if (sas_device->starget)
- dewtprintk(ioc, starget_printk(KERN_INFO, sas_device->starget,
- "tr_complete:handle(0x%04x), (%s) ioc_status(0x%04x), "
- "loginfo(0x%08x), completed(%d)\n",
- sas_device->handle, (sas_device->state &
- MPT2SAS_REQ_SAS_CNTRL) ? "open" : "active",
- le16_to_cpu(mpi_reply->IOCStatus),
+ if (sas_device) {
+ sas_device->state |= MPTSAS_STATE_TR_COMPLETE;
+ if (sas_device->starget) {
+ dewtprintk(ioc, starget_printk(KERN_INFO,
+ sas_device->starget, "tr_complete:handle(0x%04x), "
+ "(%s) ioc_status(0x%04x), loginfo(0x%08x), "
+ "completed(%d)\n", sas_device->handle,
+ (sas_device->state & MPT2SAS_REQ_SAS_CNTRL) ?
+ "open" : "active",
+ le16_to_cpu(mpi_reply->IOCStatus),
+ le32_to_cpu(mpi_reply->IOCLogInfo),
+ le32_to_cpu(mpi_reply->TerminationCount)));
+ if (sas_device->starget->hostdata) {
+ sas_target_priv_data =
+ sas_device->starget->hostdata;
+ sas_target_priv_data->tm_busy = 0;
+ }
+ }
+ } else {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
+ "tr_complete:handle(0x%04x), (open) ioc_status(0x%04x), "
+ "loginfo(0x%08x), completed(%d)\n", ioc->name,
+ handle, le16_to_cpu(mpi_reply->IOCStatus),
le32_to_cpu(mpi_reply->IOCLogInfo),
le32_to_cpu(mpi_reply->TerminationCount)));
-
- if (sas_device->starget && sas_device->starget->hostdata) {
- sas_target_priv_data = sas_device->starget->hostdata;
- sas_target_priv_data->tm_busy = 0;
}
if (!list_empty(&ioc->delayed_tr_list)) {
@@ -2514,8 +2609,7 @@ _scsih_tm_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
} else
rc = 1;
-
- if (!(sas_device->state & MPT2SAS_REQ_SAS_CNTRL))
+ if (sas_device && !(sas_device->state & MPT2SAS_REQ_SAS_CNTRL))
return rc;
if (ioc->shost_recovery) {
@@ -2531,12 +2625,14 @@ _scsih_tm_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
return rc;
}
+ if (sas_device)
+ sas_device->state |= MPTSAS_STATE_CNTRL_SEND;
+
mpi_request = mpt2sas_base_get_msg_frame(ioc, smid_sas_ctrl);
memset(mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t));
mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE;
mpi_request->DevHandle = mpi_reply->DevHandle;
- sas_device->state |= MPTSAS_STATE_CNTRL_SEND;
mpt2sas_base_put_smid_default(ioc, smid_sas_ctrl);
return rc;
}
@@ -2678,8 +2774,6 @@ _scsih_setup_eedp(struct scsi_cmnd *scmd, Mpi2SCSIIORequest_t *mpi_request)
else
return;
- mpi_request->EEDPBlockSize = scmd->device->sector_size;
-
switch (prot_type) {
case SCSI_PROT_DIF_TYPE1:
@@ -2687,8 +2781,7 @@ _scsih_setup_eedp(struct scsi_cmnd *scmd, Mpi2SCSIIORequest_t *mpi_request)
* enable ref/guard checking
* auto increment ref tag
*/
- mpi_request->EEDPFlags = eedp_flags |
- MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
+ eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG |
MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
mpi_request->CDB.EEDP32.PrimaryReferenceTag =
@@ -2701,11 +2794,11 @@ _scsih_setup_eedp(struct scsi_cmnd *scmd, Mpi2SCSIIORequest_t *mpi_request)
/*
* enable guard checking
*/
- mpi_request->EEDPFlags = eedp_flags |
- MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
-
+ eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
break;
}
+ mpi_request->EEDPBlockSize = cpu_to_le32(scmd->device->sector_size);
+ mpi_request->EEDPFlags = cpu_to_le16(eedp_flags);
}
/**
@@ -2788,7 +2881,7 @@ _scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
}
/* see if we are busy with task managment stuff */
- if (sas_target_priv_data->tm_busy)
+ if (sas_device_priv_data->block || sas_target_priv_data->tm_busy)
return SCSI_MLQUEUE_DEVICE_BUSY;
else if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress)
return SCSI_MLQUEUE_HOST_BUSY;
@@ -2842,7 +2935,7 @@ _scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
mpi_request->MsgFlags = MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR;
mpi_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
mpi_request->SenseBufferLowAddress =
- (u32)mpt2sas_base_get_sense_buffer_dma(ioc, smid);
+ mpt2sas_base_get_sense_buffer_dma(ioc, smid);
mpi_request->SGLOffset0 = offsetof(Mpi2SCSIIORequest_t, SGL) / 4;
mpi_request->SGLFlags = cpu_to_le16(MPI2_SCSIIO_SGLFLAGS_TYPE_MPI +
MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR);
@@ -3059,7 +3152,7 @@ _scsih_scsi_ioc_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) {
response_info = le32_to_cpu(mpi_reply->ResponseInfo);
response_bytes = (u8 *)&response_info;
- _scsih_response_code(ioc, response_bytes[3]);
+ _scsih_response_code(ioc, response_bytes[0]);
}
}
#endif
@@ -3177,7 +3270,7 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
u8 scsi_status;
u32 log_info;
struct MPT2SAS_DEVICE *sas_device_priv_data;
- u32 response_code;
+ u32 response_code = 0;
mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
scmd = _scsih_scsi_lookup_get(ioc, smid);
@@ -3199,16 +3292,16 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
}
/* turning off TLR */
+ scsi_state = mpi_reply->SCSIState;
+ if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID)
+ response_code =
+ le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF;
if (!sas_device_priv_data->tlr_snoop_check) {
sas_device_priv_data->tlr_snoop_check++;
- if (sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) {
- response_code = (le32_to_cpu(mpi_reply->ResponseInfo)
- >> 24);
- if (response_code ==
- MPI2_SCSITASKMGMT_RSP_INVALID_FRAME)
- sas_device_priv_data->flags &=
- ~MPT_DEVICE_TLR_ON;
- }
+ if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) &&
+ response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME)
+ sas_device_priv_data->flags &=
+ ~MPT_DEVICE_TLR_ON;
}
xfer_cnt = le32_to_cpu(mpi_reply->TransferCount);
@@ -3219,7 +3312,6 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
else
log_info = 0;
ioc_status &= MPI2_IOCSTATUS_MASK;
- scsi_state = mpi_reply->SCSIState;
scsi_status = mpi_reply->SCSIStatus;
if (ioc_status == MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 &&
@@ -3255,10 +3347,9 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
if (sas_device_priv_data->block) {
- scmd->result = (DID_BUS_BUSY << 16);
- break;
+ scmd->result = DID_TRANSPORT_DISRUPTED << 16;
+ goto out;
}
-
case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
scmd->result = DID_RESET << 16;
@@ -3304,8 +3395,10 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
case MPI2_IOCSTATUS_SUCCESS:
scmd->result = (DID_OK << 16) | scsi_status;
- if (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED |
- MPI2_SCSI_STATE_NO_SCSI_STATUS))
+ if (response_code ==
+ MPI2_SCSITASKMGMT_RSP_INVALID_FRAME ||
+ (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED |
+ MPI2_SCSI_STATE_NO_SCSI_STATUS)))
scmd->result = DID_SOFT_ERROR << 16;
else if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
scmd->result = DID_RESET << 16;
@@ -3344,7 +3437,6 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
/**
* _scsih_sas_host_refresh - refreshing sas host object contents
* @ioc: per adapter object
- * @update: update link information
* Context: user
*
* During port enable, fw will send topology events for every device. Its
@@ -3354,13 +3446,14 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
* Return nothing.
*/
static void
-_scsih_sas_host_refresh(struct MPT2SAS_ADAPTER *ioc, u8 update)
+_scsih_sas_host_refresh(struct MPT2SAS_ADAPTER *ioc)
{
u16 sz;
u16 ioc_status;
int i;
Mpi2ConfigReply_t mpi_reply;
Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
+ u16 attached_handle;
dtmprintk(ioc, printk(MPT2SAS_INFO_FMT
"updating handles for sas_host(0x%016llx)\n",
@@ -3374,27 +3467,24 @@ _scsih_sas_host_refresh(struct MPT2SAS_ADAPTER *ioc, u8 update)
ioc->name, __FILE__, __LINE__, __func__);
return;
}
- if (!(mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
- sas_iounit_pg0, sz))) {
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
- goto out;
- for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
- ioc->sas_hba.phy[i].handle =
- le16_to_cpu(sas_iounit_pg0->PhyData[i].
- ControllerDevHandle);
- if (update)
- mpt2sas_transport_update_links(
- ioc,
- ioc->sas_hba.phy[i].handle,
- le16_to_cpu(sas_iounit_pg0->PhyData[i].
- AttachedDevHandle), i,
- sas_iounit_pg0->PhyData[i].
- NegotiatedLinkRate >> 4);
- }
- }
+ if ((mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
+ sas_iounit_pg0, sz)) != 0)
+ goto out;
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+ goto out;
+ for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
+ if (i == 0)
+ ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0->
+ PhyData[0].ControllerDevHandle);
+ ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
+ attached_handle = le16_to_cpu(sas_iounit_pg0->PhyData[i].
+ AttachedDevHandle);
+ mpt2sas_transport_update_links(ioc, ioc->sas_hba.sas_address,
+ attached_handle, i, sas_iounit_pg0->PhyData[i].
+ NegotiatedLinkRate >> 4);
+ }
out:
kfree(sas_iounit_pg0);
}
@@ -3507,19 +3597,21 @@ _scsih_sas_host_add(struct MPT2SAS_ADAPTER *ioc)
ioc->name, __FILE__, __LINE__, __func__);
goto out;
}
- ioc->sas_hba.phy[i].handle =
- le16_to_cpu(sas_iounit_pg0->PhyData[i].ControllerDevHandle);
+
+ if (i == 0)
+ ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0->
+ PhyData[0].ControllerDevHandle);
+ ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
ioc->sas_hba.phy[i].phy_id = i;
mpt2sas_transport_add_host_phy(ioc, &ioc->sas_hba.phy[i],
phy_pg0, ioc->sas_hba.parent_dev);
}
if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
- MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, ioc->sas_hba.phy[0].handle))) {
+ MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, ioc->sas_hba.handle))) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
goto out;
}
- ioc->sas_hba.handle = le16_to_cpu(sas_device_pg0.DevHandle);
ioc->sas_hba.enclosure_handle =
le16_to_cpu(sas_device_pg0.EnclosureHandle);
ioc->sas_hba.sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
@@ -3562,7 +3654,7 @@ _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle)
Mpi2SasEnclosurePage0_t enclosure_pg0;
u32 ioc_status;
u16 parent_handle;
- __le64 sas_address;
+ __le64 sas_address, sas_address_parent = 0;
int i;
unsigned long flags;
struct _sas_port *mpt2sas_port = NULL;
@@ -3591,10 +3683,16 @@ _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle)
/* handle out of order topology events */
parent_handle = le16_to_cpu(expander_pg0.ParentDevHandle);
- if (parent_handle >= ioc->sas_hba.num_phys) {
+ if (_scsih_get_sas_address(ioc, parent_handle, &sas_address_parent)
+ != 0) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return -1;
+ }
+ if (sas_address_parent != ioc->sas_hba.sas_address) {
spin_lock_irqsave(&ioc->sas_node_lock, flags);
- sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc,
- parent_handle);
+ sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc,
+ sas_address_parent);
spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
if (!sas_expander) {
rc = _scsih_expander_add(ioc, parent_handle);
@@ -3622,14 +3720,12 @@ _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle)
sas_expander->handle = handle;
sas_expander->num_phys = expander_pg0.NumPhys;
- sas_expander->parent_handle = parent_handle;
- sas_expander->enclosure_handle =
- le16_to_cpu(expander_pg0.EnclosureHandle);
+ sas_expander->sas_address_parent = sas_address_parent;
sas_expander->sas_address = sas_address;
printk(MPT2SAS_INFO_FMT "expander_add: handle(0x%04x),"
" parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n", ioc->name,
- handle, sas_expander->parent_handle, (unsigned long long)
+ handle, parent_handle, (unsigned long long)
sas_expander->sas_address, sas_expander->num_phys);
if (!sas_expander->num_phys)
@@ -3645,7 +3741,7 @@ _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle)
INIT_LIST_HEAD(&sas_expander->sas_port_list);
mpt2sas_port = mpt2sas_transport_port_add(ioc, handle,
- sas_expander->parent_handle);
+ sas_address_parent);
if (!mpt2sas_port) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
@@ -3691,20 +3787,54 @@ _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle)
if (mpt2sas_port)
mpt2sas_transport_port_remove(ioc, sas_expander->sas_address,
- sas_expander->parent_handle);
+ sas_address_parent);
kfree(sas_expander);
return rc;
}
/**
+ * _scsih_done - scsih callback handler.
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Callback handler when sending internal generated message frames.
+ * The callback index passed is `ioc->scsih_cb_idx`
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
+ */
+static u8
+_scsih_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
+{
+ MPI2DefaultReply_t *mpi_reply;
+
+ mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
+ if (ioc->scsih_cmds.status == MPT2_CMD_NOT_USED)
+ return 1;
+ if (ioc->scsih_cmds.smid != smid)
+ return 1;
+ ioc->scsih_cmds.status |= MPT2_CMD_COMPLETE;
+ if (mpi_reply) {
+ memcpy(ioc->scsih_cmds.reply, mpi_reply,
+ mpi_reply->MsgLength*4);
+ ioc->scsih_cmds.status |= MPT2_CMD_REPLY_VALID;
+ }
+ ioc->scsih_cmds.status &= ~MPT2_CMD_PENDING;
+ complete(&ioc->scsih_cmds.done);
+ return 1;
+}
+
+/**
* _scsih_expander_remove - removing expander object
* @ioc: per adapter object
- * @handle: expander handle
+ * @sas_address: expander sas_address
*
* Return nothing.
*/
static void
-_scsih_expander_remove(struct MPT2SAS_ADAPTER *ioc, u16 handle)
+_scsih_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address)
{
struct _sas_node *sas_expander;
unsigned long flags;
@@ -3713,7 +3843,8 @@ _scsih_expander_remove(struct MPT2SAS_ADAPTER *ioc, u16 handle)
return;
spin_lock_irqsave(&ioc->sas_node_lock, flags);
- sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc, handle);
+ sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc,
+ sas_address);
spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
_scsih_expander_node_remove(ioc, sas_expander);
}
@@ -3805,8 +3936,11 @@ _scsih_add_device(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u8 is_pd)
}
sas_device->handle = handle;
- sas_device->parent_handle =
- le16_to_cpu(sas_device_pg0.ParentDevHandle);
+ if (_scsih_get_sas_address(ioc, le16_to_cpu
+ (sas_device_pg0.ParentDevHandle),
+ &sas_device->sas_address_parent) != 0)
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
sas_device->enclosure_handle =
le16_to_cpu(sas_device_pg0.EnclosureHandle);
sas_device->slot =
@@ -3836,43 +3970,39 @@ _scsih_add_device(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u8 is_pd)
/**
* _scsih_remove_device - removing sas device object
* @ioc: per adapter object
- * @handle: sas device handle
+ * @sas_device: the sas_device object
*
* Return nothing.
*/
static void
-_scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
+_scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, struct _sas_device
+ *sas_device)
{
struct MPT2SAS_TARGET *sas_target_priv_data;
- struct _sas_device *sas_device;
- unsigned long flags;
Mpi2SasIoUnitControlReply_t mpi_reply;
Mpi2SasIoUnitControlRequest_t mpi_request;
- u16 device_handle;
+ u16 device_handle, handle;
- /* lookup sas_device */
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
- if (!sas_device) {
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ if (!sas_device)
return;
- }
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter: handle"
- "(0x%04x)\n", ioc->name, __func__, handle));
+ handle = sas_device->handle;
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter: handle(0x%04x),"
+ " sas_addr(0x%016llx)\n", ioc->name, __func__, handle,
+ (unsigned long long) sas_device->sas_address));
if (sas_device->starget && sas_device->starget->hostdata) {
sas_target_priv_data = sas_device->starget->hostdata;
sas_target_priv_data->deleted = 1;
}
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- if (ioc->remove_host)
+ if (ioc->remove_host || ioc->shost_recovery || !handle)
goto out;
if ((sas_device->state & MPTSAS_STATE_TR_COMPLETE)) {
dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "\tskip "
- "target_reset handle(0x%04x)\n", ioc->name, handle));
+ "target_reset handle(0x%04x)\n", ioc->name,
+ handle));
goto skip_tr;
}
@@ -3925,10 +4055,10 @@ _scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
_scsih_ublock_io_device(ioc, handle);
mpt2sas_transport_port_remove(ioc, sas_device->sas_address,
- sas_device->parent_handle);
+ sas_device->sas_address_parent);
printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), sas_addr"
- "(0x%016llx)\n", ioc->name, sas_device->handle,
+ "(0x%016llx)\n", ioc->name, handle,
(unsigned long long) sas_device->sas_address);
_scsih_sas_device_remove(ioc, sas_device);
@@ -3952,7 +4082,7 @@ _scsih_sas_topology_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
u16 reason_code;
u8 phy_number;
char *status_str = NULL;
- char link_rate[25];
+ u8 link_rate, prev_link_rate;
switch (event_data->ExpStatus) {
case MPI2_EVENT_SAS_TOPO_ES_ADDED:
@@ -3962,6 +4092,7 @@ _scsih_sas_topology_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
status_str = "remove";
break;
case MPI2_EVENT_SAS_TOPO_ES_RESPONDING:
+ case 0:
status_str = "responding";
break;
case MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING:
@@ -3987,30 +4118,30 @@ _scsih_sas_topology_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
MPI2_EVENT_SAS_TOPO_RC_MASK;
switch (reason_code) {
case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
- snprintf(link_rate, 25, ": add, link(0x%02x)",
- (event_data->PHY[i].LinkRate >> 4));
- status_str = link_rate;
+ status_str = "target add";
break;
case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
- status_str = ": remove";
+ status_str = "target remove";
break;
case MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING:
- status_str = ": remove_delay";
+ status_str = "delay target remove";
break;
case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
- snprintf(link_rate, 25, ": link(0x%02x)",
- (event_data->PHY[i].LinkRate >> 4));
- status_str = link_rate;
+ status_str = "link rate change";
break;
case MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE:
- status_str = ": responding";
+ status_str = "target responding";
break;
default:
- status_str = ": unknown";
+ status_str = "unknown";
break;
}
- printk(KERN_DEBUG "\tphy(%02d), attached_handle(0x%04x)%s\n",
- phy_number, handle, status_str);
+ link_rate = event_data->PHY[i].LinkRate >> 4;
+ prev_link_rate = event_data->PHY[i].LinkRate & 0xF;
+ printk(KERN_DEBUG "\tphy(%02d), attached_handle(0x%04x): %s:"
+ " link rate: new(0x%02x), old(0x%02x)\n", phy_number,
+ handle, status_str, link_rate, prev_link_rate);
+
}
}
#endif
@@ -4031,8 +4162,10 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc,
u16 reason_code;
u8 phy_number;
struct _sas_node *sas_expander;
+ struct _sas_device *sas_device;
+ u64 sas_address;
unsigned long flags;
- u8 link_rate_;
+ u8 link_rate, prev_link_rate;
Mpi2EventDataSasTopologyChangeList_t *event_data = fw_event->event_data;
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
@@ -4040,10 +4173,13 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc,
_scsih_sas_topology_change_event_debug(ioc, event_data);
#endif
+ if (ioc->shost_recovery)
+ return;
+
if (!ioc->sas_hba.num_phys)
_scsih_sas_host_add(ioc);
else
- _scsih_sas_host_refresh(ioc, 0);
+ _scsih_sas_host_refresh(ioc);
if (fw_event->ignore) {
dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ignoring expander "
@@ -4058,6 +4194,17 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc,
if (_scsih_expander_add(ioc, parent_handle) != 0)
return;
+ spin_lock_irqsave(&ioc->sas_node_lock, flags);
+ sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc,
+ parent_handle);
+ spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+ if (sas_expander)
+ sas_address = sas_expander->sas_address;
+ else if (parent_handle < ioc->sas_hba.num_phys)
+ sas_address = ioc->sas_hba.sas_address;
+ else
+ return;
+
/* handle siblings events */
for (i = 0; i < event_data->NumEntries; i++) {
if (fw_event->ignore) {
@@ -4077,48 +4224,47 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc,
handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
if (!handle)
continue;
- link_rate_ = event_data->PHY[i].LinkRate >> 4;
+ link_rate = event_data->PHY[i].LinkRate >> 4;
+ prev_link_rate = event_data->PHY[i].LinkRate & 0xF;
switch (reason_code) {
case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
+
+ if (link_rate == prev_link_rate)
+ break;
+
+ mpt2sas_transport_update_links(ioc, sas_address,
+ handle, phy_number, link_rate);
+
+ if (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)
+ _scsih_ublock_io_device(ioc, handle);
+ break;
case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
- if (!parent_handle) {
- if (phy_number < ioc->sas_hba.num_phys)
- mpt2sas_transport_update_links(
- ioc,
- ioc->sas_hba.phy[phy_number].handle,
- handle, phy_number, link_rate_);
- } else {
- spin_lock_irqsave(&ioc->sas_node_lock, flags);
- sas_expander =
- mpt2sas_scsih_expander_find_by_handle(ioc,
- parent_handle);
- spin_unlock_irqrestore(&ioc->sas_node_lock,
- flags);
- if (sas_expander) {
- if (phy_number < sas_expander->num_phys)
- mpt2sas_transport_update_links(
- ioc,
- sas_expander->
- phy[phy_number].handle,
- handle, phy_number,
- link_rate_);
- }
- }
- if (reason_code == MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED) {
- if (link_rate_ < MPI2_SAS_NEG_LINK_RATE_1_5)
- break;
- _scsih_add_device(ioc, handle, phy_number, 0);
- }
+
+ mpt2sas_transport_update_links(ioc, sas_address,
+ handle, phy_number, link_rate);
+
+ _scsih_add_device(ioc, handle, phy_number, 0);
break;
case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
- _scsih_remove_device(ioc, handle);
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = _scsih_sas_device_find_by_handle(ioc,
+ handle);
+ if (!sas_device) {
+ spin_unlock_irqrestore(&ioc->sas_device_lock,
+ flags);
+ break;
+ }
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ _scsih_remove_device(ioc, sas_device);
break;
}
}
/* handle expander removal */
- if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING)
- _scsih_expander_remove(ioc, parent_handle);
+ if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING &&
+ sas_expander)
+ _scsih_expander_remove(ioc, sas_address);
}
@@ -4170,6 +4316,12 @@ _scsih_sas_device_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
case MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION:
reason_str = "internal async notification";
break;
+ case MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY:
+ reason_str = "expander reduced functionality";
+ break;
+ case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY:
+ reason_str = "expander reduced functionality complete";
+ break;
default:
reason_str = "unknown reason";
break;
@@ -4197,11 +4349,43 @@ static void
_scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc,
struct fw_event_work *fw_event)
{
+ struct MPT2SAS_TARGET *target_priv_data;
+ struct _sas_device *sas_device;
+ __le64 sas_address;
+ unsigned long flags;
+ Mpi2EventDataSasDeviceStatusChange_t *event_data =
+ fw_event->event_data;
+
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
_scsih_sas_device_status_change_event_debug(ioc,
- fw_event->event_data);
+ event_data);
#endif
+
+ if (!(event_data->ReasonCode ==
+ MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET &&
+ event_data->ReasonCode ==
+ MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET))
+ return;
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_address = le64_to_cpu(event_data->SASAddress);
+ sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
+ sas_address);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ if (!sas_device || !sas_device->starget)
+ return;
+
+ target_priv_data = sas_device->starget->hostdata;
+ if (!target_priv_data)
+ return;
+
+ if (event_data->ReasonCode ==
+ MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET)
+ target_priv_data->tm_busy = 1;
+ else
+ target_priv_data->tm_busy = 0;
}
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
@@ -4281,6 +4465,7 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc,
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
Mpi2EventDataSasBroadcastPrimitive_t *event_data = fw_event->event_data;
#endif
+ u16 ioc_status;
dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "broadcast primative: "
"phy number(%d), width(%d)\n", ioc->name, event_data->PhyNum,
event_data->PortWidth));
@@ -4314,8 +4499,9 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc,
mpt2sas_scsih_issue_tm(ioc, handle, lun,
MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30);
ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
-
- if ((mpi_reply->IOCStatus == MPI2_IOCSTATUS_SUCCESS) &&
+ ioc_status = le16_to_cpu(mpi_reply->IOCStatus)
+ & MPI2_IOCSTATUS_MASK;
+ if ((ioc_status == MPI2_IOCSTATUS_SUCCESS) &&
(mpi_reply->ResponseCode ==
MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED ||
mpi_reply->ResponseCode ==
@@ -4570,7 +4756,7 @@ _scsih_sas_pd_delete(struct MPT2SAS_ADAPTER *ioc,
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
if (!sas_device)
return;
- _scsih_remove_device(ioc, handle);
+ _scsih_remove_device(ioc, sas_device);
}
/**
@@ -4591,6 +4777,8 @@ _scsih_sas_pd_add(struct MPT2SAS_ADAPTER *ioc,
Mpi2ConfigReply_t mpi_reply;
Mpi2SasDevicePage0_t sas_device_pg0;
u32 ioc_status;
+ u64 sas_address;
+ u16 parent_handle;
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
@@ -4615,9 +4803,10 @@ _scsih_sas_pd_add(struct MPT2SAS_ADAPTER *ioc,
return;
}
- mpt2sas_transport_update_links(ioc,
- le16_to_cpu(sas_device_pg0.ParentDevHandle),
- handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+ parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
+ if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address))
+ mpt2sas_transport_update_links(ioc, sas_address, handle,
+ sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
_scsih_add_device(ioc, handle, 0, 1);
}
@@ -4857,7 +5046,7 @@ static void
_scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc,
struct fw_event_work *fw_event)
{
- u16 handle;
+ u16 handle, parent_handle;
u32 state;
struct _sas_device *sas_device;
unsigned long flags;
@@ -4865,6 +5054,7 @@ _scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc,
Mpi2SasDevicePage0_t sas_device_pg0;
u32 ioc_status;
Mpi2EventDataIrPhysicalDisk_t *event_data = fw_event->event_data;
+ u64 sas_address;
if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED)
return;
@@ -4906,9 +5096,10 @@ _scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc,
return;
}
- mpt2sas_transport_update_links(ioc,
- le16_to_cpu(sas_device_pg0.ParentDevHandle),
- handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+ parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
+ if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address))
+ mpt2sas_transport_update_links(ioc, sas_address, handle,
+ sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
_scsih_add_device(ioc, handle, 0, 1);
@@ -4948,11 +5139,17 @@ _scsih_sas_ir_operation_status_event_debug(struct MPT2SAS_ADAPTER *ioc,
case MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK:
reason_str = "consistency check";
break;
- default:
- reason_str = "unknown reason";
+ case MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT:
+ reason_str = "background init";
+ break;
+ case MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT:
+ reason_str = "make data consistent";
break;
}
+ if (!reason_str)
+ return;
+
printk(MPT2SAS_INFO_FMT "raid operational status: (%s)"
"\thandle(0x%04x), percent complete(%d)\n",
ioc->name, reason_str,
@@ -5252,18 +5449,23 @@ _scsih_mark_responding_expander(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
{
struct _sas_node *sas_expander;
unsigned long flags;
+ int i;
spin_lock_irqsave(&ioc->sas_node_lock, flags);
list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
- if (sas_expander->sas_address == sas_address) {
- sas_expander->responding = 1;
- if (sas_expander->handle != handle) {
- printk(KERN_INFO "old handle(0x%04x)\n",
- sas_expander->handle);
- sas_expander->handle = handle;
- }
+ if (sas_expander->sas_address != sas_address)
+ continue;
+ sas_expander->responding = 1;
+ if (sas_expander->handle == handle)
goto out;
- }
+ printk(KERN_INFO "\texpander(0x%016llx): handle changed"
+ " from(0x%04x) to (0x%04x)!!!\n",
+ (unsigned long long)sas_expander->sas_address,
+ sas_expander->handle, handle);
+ sas_expander->handle = handle;
+ for (i = 0 ; i < sas_expander->num_phys ; i++)
+ sas_expander->phy[i].handle = handle;
+ goto out;
}
out:
spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
@@ -5340,7 +5542,9 @@ _scsih_remove_unresponding_devices(struct MPT2SAS_ADAPTER *ioc)
(unsigned long long)
sas_device->enclosure_logical_id,
sas_device->slot);
- _scsih_remove_device(ioc, sas_device->handle);
+ /* invalidate the device handle */
+ sas_device->handle = 0;
+ _scsih_remove_device(ioc, sas_device);
}
list_for_each_entry_safe(raid_device, raid_device_next,
@@ -5366,7 +5570,7 @@ _scsih_remove_unresponding_devices(struct MPT2SAS_ADAPTER *ioc)
sas_expander->responding = 0;
continue;
}
- _scsih_expander_remove(ioc, sas_expander->handle);
+ _scsih_expander_remove(ioc, sas_expander->sas_address);
goto retry_expander_search;
}
}
@@ -5406,7 +5610,7 @@ mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
case MPT2_IOC_DONE_RESET:
dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
"MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
- _scsih_sas_host_refresh(ioc, 0);
+ _scsih_sas_host_refresh(ioc);
_scsih_search_responding_sas_devices(ioc);
_scsih_search_responding_raid_devices(ioc);
_scsih_search_responding_expanders(ioc);
@@ -5646,7 +5850,7 @@ _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc,
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
if (!sas_device)
continue;
- _scsih_remove_device(ioc, sas_device->handle);
+ _scsih_remove_device(ioc, sas_device);
if (ioc->shost_recovery)
return;
goto retry_device_search;
@@ -5669,7 +5873,8 @@ _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc,
spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
if (!expander_sibling)
continue;
- _scsih_expander_remove(ioc, expander_sibling->handle);
+ _scsih_expander_remove(ioc,
+ expander_sibling->sas_address);
if (ioc->shost_recovery)
return;
goto retry_expander_search;
@@ -5677,7 +5882,7 @@ _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc,
}
mpt2sas_transport_port_remove(ioc, sas_expander->sas_address,
- sas_expander->parent_handle);
+ sas_expander->sas_address_parent);
printk(MPT2SAS_INFO_FMT "expander_remove: handle"
"(0x%04x), sas_addr(0x%016llx)\n", ioc->name,
@@ -5690,9 +5895,99 @@ _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc,
}
/**
+ * _scsih_ir_shutdown - IR shutdown notification
+ * @ioc: per adapter object
+ *
+ * Sending RAID Action to alert the Integrated RAID subsystem of the IOC that
+ * the host system is shutting down.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_ir_shutdown(struct MPT2SAS_ADAPTER *ioc)
+{
+ Mpi2RaidActionRequest_t *mpi_request;
+ Mpi2RaidActionReply_t *mpi_reply;
+ u16 smid;
+
+ /* is IR firmware build loaded ? */
+ if (!ioc->ir_firmware)
+ return;
+
+ /* are there any volumes ? */
+ if (list_empty(&ioc->raid_device_list))
+ return;
+
+ mutex_lock(&ioc->scsih_cmds.mutex);
+
+ if (ioc->scsih_cmds.status != MPT2_CMD_NOT_USED) {
+ printk(MPT2SAS_ERR_FMT "%s: scsih_cmd in use\n",
+ ioc->name, __func__);
+ goto out;
+ }
+ ioc->scsih_cmds.status = MPT2_CMD_PENDING;
+
+ smid = mpt2sas_base_get_smid(ioc, ioc->scsih_cb_idx);
+ if (!smid) {
+ printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ ioc->scsih_cmds.status = MPT2_CMD_NOT_USED;
+ goto out;
+ }
+
+ mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
+ ioc->scsih_cmds.smid = smid;
+ memset(mpi_request, 0, sizeof(Mpi2RaidActionRequest_t));
+
+ mpi_request->Function = MPI2_FUNCTION_RAID_ACTION;
+ mpi_request->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED;
+
+ printk(MPT2SAS_INFO_FMT "IR shutdown (sending)\n", ioc->name);
+ init_completion(&ioc->scsih_cmds.done);
+ mpt2sas_base_put_smid_default(ioc, smid);
+ wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ);
+
+ if (!(ioc->scsih_cmds.status & MPT2_CMD_COMPLETE)) {
+ printk(MPT2SAS_ERR_FMT "%s: timeout\n",
+ ioc->name, __func__);
+ goto out;
+ }
+
+ if (ioc->scsih_cmds.status & MPT2_CMD_REPLY_VALID) {
+ mpi_reply = ioc->scsih_cmds.reply;
+
+ printk(MPT2SAS_INFO_FMT "IR shutdown (complete): "
+ "ioc_status(0x%04x), loginfo(0x%08x)\n",
+ ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
+ le32_to_cpu(mpi_reply->IOCLogInfo));
+ }
+
+ out:
+ ioc->scsih_cmds.status = MPT2_CMD_NOT_USED;
+ mutex_unlock(&ioc->scsih_cmds.mutex);
+}
+
+/**
+ * _scsih_shutdown - routine call during system shutdown
+ * @pdev: PCI device struct
+ *
+ * Return nothing.
+ */
+static void
+_scsih_shutdown(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ _scsih_ir_shutdown(ioc);
+ mpt2sas_base_detach(ioc);
+}
+
+/**
* _scsih_remove - detach and remove add host
* @pdev: PCI device struct
*
+ * Routine called when unloading the driver.
* Return nothing.
*/
static void __devexit
@@ -5726,7 +6021,7 @@ _scsih_remove(struct pci_dev *pdev)
mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
mpt2sas_port->remote_identify.sas_address);
if (sas_device) {
- _scsih_remove_device(ioc, sas_device->handle);
+ _scsih_remove_device(ioc, sas_device);
goto retry_again;
}
} else {
@@ -5735,7 +6030,7 @@ _scsih_remove(struct pci_dev *pdev)
mpt2sas_port->remote_identify.sas_address);
if (expander_sibling) {
_scsih_expander_remove(ioc,
- expander_sibling->handle);
+ expander_sibling->sas_address);
goto retry_again;
}
}
@@ -5749,7 +6044,7 @@ _scsih_remove(struct pci_dev *pdev)
}
sas_remove_host(shost);
- mpt2sas_base_detach(ioc);
+ _scsih_shutdown(pdev);
list_del(&ioc->list);
scsi_remove_host(shost);
scsi_host_put(shost);
@@ -5770,7 +6065,8 @@ _scsih_probe_boot_devices(struct MPT2SAS_ADAPTER *ioc)
void *device;
struct _sas_device *sas_device;
struct _raid_device *raid_device;
- u16 handle, parent_handle;
+ u16 handle;
+ u64 sas_address_parent;
u64 sas_address;
unsigned long flags;
int rc;
@@ -5799,17 +6095,17 @@ _scsih_probe_boot_devices(struct MPT2SAS_ADAPTER *ioc)
} else {
sas_device = device;
handle = sas_device->handle;
- parent_handle = sas_device->parent_handle;
+ sas_address_parent = sas_device->sas_address_parent;
sas_address = sas_device->sas_address;
spin_lock_irqsave(&ioc->sas_device_lock, flags);
list_move_tail(&sas_device->list, &ioc->sas_device_list);
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
- sas_device->parent_handle)) {
+ sas_device->sas_address_parent)) {
_scsih_sas_device_remove(ioc, sas_device);
} else if (!sas_device->starget) {
mpt2sas_transport_port_remove(ioc, sas_address,
- parent_handle);
+ sas_address_parent);
_scsih_sas_device_remove(ioc, sas_device);
}
}
@@ -5849,8 +6145,6 @@ _scsih_probe_sas(struct MPT2SAS_ADAPTER *ioc)
{
struct _sas_device *sas_device, *next;
unsigned long flags;
- u16 handle, parent_handle;
- u64 sas_address;
/* SAS Device List */
list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list,
@@ -5859,14 +6153,13 @@ _scsih_probe_sas(struct MPT2SAS_ADAPTER *ioc)
list_move_tail(&sas_device->list, &ioc->sas_device_list);
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- handle = sas_device->handle;
- parent_handle = sas_device->parent_handle;
- sas_address = sas_device->sas_address;
- if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) {
+ if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
+ sas_device->sas_address_parent)) {
_scsih_sas_device_remove(ioc, sas_device);
} else if (!sas_device->starget) {
- mpt2sas_transport_port_remove(ioc, sas_address,
- parent_handle);
+ mpt2sas_transport_port_remove(ioc,
+ sas_device->sas_address,
+ sas_device->sas_address_parent);
_scsih_sas_device_remove(ioc, sas_device);
}
}
@@ -5935,6 +6228,7 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->ctl_cb_idx = ctl_cb_idx;
ioc->base_cb_idx = base_cb_idx;
ioc->transport_cb_idx = transport_cb_idx;
+ ioc->scsih_cb_idx = scsih_cb_idx;
ioc->config_cb_idx = config_cb_idx;
ioc->tm_tr_cb_idx = tm_tr_cb_idx;
ioc->tm_sas_control_cb_idx = tm_sas_control_cb_idx;
@@ -6072,6 +6366,7 @@ static struct pci_driver scsih_driver = {
.id_table = scsih_pci_table,
.probe = _scsih_probe,
.remove = __devexit_p(_scsih_remove),
+ .shutdown = _scsih_shutdown,
#ifdef CONFIG_PM
.suspend = _scsih_suspend,
.resume = _scsih_resume,
@@ -6113,6 +6408,9 @@ _scsih_init(void)
transport_cb_idx = mpt2sas_base_register_callback_handler(
mpt2sas_transport_done);
+ /* scsih internal commands callback handler */
+ scsih_cb_idx = mpt2sas_base_register_callback_handler(_scsih_done);
+
/* configuration page API internal commands callback handler */
config_cb_idx = mpt2sas_base_register_callback_handler(
mpt2sas_config_done);
@@ -6152,6 +6450,7 @@ _scsih_exit(void)
mpt2sas_base_release_callback_handler(tm_cb_idx);
mpt2sas_base_release_callback_handler(base_cb_idx);
mpt2sas_base_release_callback_handler(transport_cb_idx);
+ mpt2sas_base_release_callback_handler(scsih_cb_idx);
mpt2sas_base_release_callback_handler(config_cb_idx);
mpt2sas_base_release_callback_handler(ctl_cb_idx);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-21 13:50:23 +0000