1 files changed, 241 insertions, 25 deletions

diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index efabea1a3ce..c7ec3f17478 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -52,6 +52,7 @@
 #include <linux/delay.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
+#include <linux/raid_class.h>
 
 #include "mpt2sas_base.h"
 
@@ -133,6 +134,9 @@ struct fw_event_work {
 	void			*event_data;
 };
 
+/* raid transport support */
+static struct raid_template *mpt2sas_raid_template;
+
 /**
  * struct _scsi_io_transfer - scsi io transfer
  * @handle: sas device handle (assigned by firmware)
@@ -1305,7 +1309,6 @@ _scsih_slave_alloc(struct scsi_device *sdev)
 	struct MPT2SAS_DEVICE *sas_device_priv_data;
 	struct scsi_target *starget;
 	struct _raid_device *raid_device;
-	struct _sas_device *sas_device;
 	unsigned long flags;
 
 	sas_device_priv_data = kzalloc(sizeof(struct scsi_device), GFP_KERNEL);
@@ -1332,21 +1335,8 @@ _scsih_slave_alloc(struct scsi_device *sdev)
 		if (raid_device)
 			raid_device->sdev = sdev; /* raid is single lun */
 		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-	} else {
-		/* set TLR bit for SSP devices */
-		if (!(ioc->facts.IOCCapabilities &
-		     MPI2_IOCFACTS_CAPABILITY_TLR))
-			goto out;
-		spin_lock_irqsave(&ioc->sas_device_lock, flags);
-		sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
-		   sas_device_priv_data->sas_target->sas_address);
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-		if (sas_device && sas_device->device_info &
-		    MPI2_SAS_DEVICE_INFO_SSP_TARGET)
-			sas_device_priv_data->flags |= MPT_DEVICE_TLR_ON;
 	}
 
- out:
 	return 0;
 }
 
@@ -1419,6 +1409,140 @@ _scsih_display_sata_capabilities(struct MPT2SAS_ADAPTER *ioc,
 }
 
 /**
+ * _scsih_is_raid - return boolean indicating device is raid volume
+ * @dev the device struct object
+ */
+static int
+_scsih_is_raid(struct device *dev)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+
+	return (sdev->channel == RAID_CHANNEL) ? 1 : 0;
+}
+
+/**
+ * _scsih_get_resync - get raid volume resync percent complete
+ * @dev the device struct object
+ */
+static void
+_scsih_get_resync(struct device *dev)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host);
+	static struct _raid_device *raid_device;
+	unsigned long flags;
+	Mpi2RaidVolPage0_t vol_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u32 volume_status_flags;
+	u8 percent_complete = 0;
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
+	    sdev->channel);
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+
+	if (!raid_device)
+		goto out;
+
+	if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0,
+	     MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle,
+	     sizeof(Mpi2RaidVolPage0_t))) {
+		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+
+	volume_status_flags = le32_to_cpu(vol_pg0.VolumeStatusFlags);
+	if (volume_status_flags & MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS)
+		percent_complete = raid_device->percent_complete;
+ out:
+	raid_set_resync(mpt2sas_raid_template, dev, percent_complete);
+}
+
+/**
+ * _scsih_get_state - get raid volume level
+ * @dev the device struct object
+ */
+static void
+_scsih_get_state(struct device *dev)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host);
+	static struct _raid_device *raid_device;
+	unsigned long flags;
+	Mpi2RaidVolPage0_t vol_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u32 volstate;
+	enum raid_state state = RAID_STATE_UNKNOWN;
+
+	spin_lock_irqsave(&ioc->raid_device_lock, flags);
+	raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
+	    sdev->channel);
+	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+
+	if (!raid_device)
+		goto out;
+
+	if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0,
+	     MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle,
+	     sizeof(Mpi2RaidVolPage0_t))) {
+		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+
+	volstate = le32_to_cpu(vol_pg0.VolumeStatusFlags);
+	if (volstate & MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS) {
+		state = RAID_STATE_RESYNCING;
+		goto out;
+	}
+
+	switch (vol_pg0.VolumeState) {
+	case MPI2_RAID_VOL_STATE_OPTIMAL:
+	case MPI2_RAID_VOL_STATE_ONLINE:
+		state = RAID_STATE_ACTIVE;
+		break;
+	case  MPI2_RAID_VOL_STATE_DEGRADED:
+		state = RAID_STATE_DEGRADED;
+		break;
+	case MPI2_RAID_VOL_STATE_FAILED:
+	case MPI2_RAID_VOL_STATE_MISSING:
+		state = RAID_STATE_OFFLINE;
+		break;
+	}
+ out:
+	raid_set_state(mpt2sas_raid_template, dev, state);
+}
+
+/**
+ * _scsih_set_level - set raid level
+ * @sdev: scsi device struct
+ * @raid_device: raid_device object
+ */
+static void
+_scsih_set_level(struct scsi_device *sdev, struct _raid_device *raid_device)
+{
+	enum raid_level level = RAID_LEVEL_UNKNOWN;
+
+	switch (raid_device->volume_type) {
+	case MPI2_RAID_VOL_TYPE_RAID0:
+		level = RAID_LEVEL_0;
+		break;
+	case MPI2_RAID_VOL_TYPE_RAID10:
+		level = RAID_LEVEL_10;
+		break;
+	case MPI2_RAID_VOL_TYPE_RAID1E:
+		level = RAID_LEVEL_1E;
+		break;
+	case MPI2_RAID_VOL_TYPE_RAID1:
+		level = RAID_LEVEL_1;
+		break;
+	}
+
+	raid_set_level(mpt2sas_raid_template, &sdev->sdev_gendev, level);
+}
+
+/**
  * _scsih_get_volume_capabilities - volume capabilities
  * @ioc: per adapter object
  * @sas_device: the raid_device object
@@ -1479,6 +1603,32 @@ _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc,
 }
 
 /**
+ * _scsih_enable_tlr - setting TLR flags
+ * @ioc: per adapter object
+ * @sdev: scsi device struct
+ *
+ * Enabling Transaction Layer Retries for tape devices when
+ * vpd page 0x90 is present
+ *
+ */
+static void
+_scsih_enable_tlr(struct MPT2SAS_ADAPTER *ioc, struct scsi_device *sdev)
+{
+	/* only for TAPE */
+	if (sdev->type != TYPE_TAPE)
+		return;
+
+	if (!(ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR))
+		return;
+
+	sas_enable_tlr(sdev);
+	sdev_printk(KERN_INFO, sdev, "TLR %s\n",
+	    sas_is_tlr_enabled(sdev) ? "Enabled" : "Disabled");
+	return;
+
+}
+
+/**
  * _scsih_slave_configure - device configure routine.
  * @sdev: scsi device struct
  *
@@ -1574,6 +1724,8 @@ _scsih_slave_configure(struct scsi_device *sdev)
 		    (unsigned long long)raid_device->wwid,
 		    raid_device->num_pds, ds);
 		_scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT);
+		/* raid transport support */
+		_scsih_set_level(sdev, raid_device);
 		return 0;
 	}
 
@@ -1621,8 +1773,10 @@ _scsih_slave_configure(struct scsi_device *sdev)
 
 	_scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT);
 
-	if (ssp_target)
+	if (ssp_target) {
 		sas_read_port_mode_page(sdev);
+		_scsih_enable_tlr(ioc, sdev);
+	}
 	return 0;
 }
 
@@ -2908,8 +3062,9 @@ _scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
 
 	} else
 		mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
-
-	if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON))
+	/* Make sure Device is not raid volume */
+	if (!_scsih_is_raid(&scmd->device->sdev_gendev) &&
+	    sas_is_tlr_enabled(scmd->device))
 		mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON;
 
 	smid = mpt2sas_base_get_smid_scsiio(ioc, ioc->scsi_io_cb_idx, scmd);
@@ -3298,10 +3453,12 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
 		    le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF;
 	if (!sas_device_priv_data->tlr_snoop_check) {
 		sas_device_priv_data->tlr_snoop_check++;
-		if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) &&
-		    response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME)
-			sas_device_priv_data->flags &=
-			    ~MPT_DEVICE_TLR_ON;
+	if (!_scsih_is_raid(&scmd->device->sdev_gendev) &&
+		sas_is_tlr_enabled(scmd->device) &&
+		    response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) {
+			sas_disable_tlr(scmd->device);
+			sdev_printk(KERN_INFO, scmd->device, "TLR disabled\n");
+		}
 	}
 
 	xfer_cnt = le32_to_cpu(mpi_reply->TransferCount);
@@ -5170,11 +5327,33 @@ static void
 _scsih_sas_ir_operation_status_event(struct MPT2SAS_ADAPTER *ioc,
     struct fw_event_work *fw_event)
 {
+	Mpi2EventDataIrOperationStatus_t *event_data = fw_event->event_data;
+	static struct _raid_device *raid_device;
+	unsigned long flags;
+	u16 handle;
+
 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
 		_scsih_sas_ir_operation_status_event_debug(ioc,
-		     fw_event->event_data);
+		     event_data);
 #endif
+
+	/* code added for raid transport support */
+	if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC) {
+
+		handle = le16_to_cpu(event_data->VolDevHandle);
+
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+
+		if (!raid_device)
+			return;
+
+		if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC)
+			raid_device->percent_complete =
+			    event_data->PercentComplete;
+	}
 }
 
 /**
@@ -5998,6 +6177,8 @@ _scsih_remove(struct pci_dev *pdev)
 	struct _sas_port *mpt2sas_port;
 	struct _sas_device *sas_device;
 	struct _sas_node *expander_sibling;
+	struct _raid_device *raid_device, *next;
+	struct MPT2SAS_TARGET *sas_target_priv_data;
 	struct workqueue_struct	*wq;
 	unsigned long flags;
 
@@ -6011,6 +6192,21 @@ _scsih_remove(struct pci_dev *pdev)
 	if (wq)
 		destroy_workqueue(wq);
 
+	/* release all the volumes */
+	list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list,
+	    list) {
+		if (raid_device->starget) {
+			sas_target_priv_data =
+			    raid_device->starget->hostdata;
+			sas_target_priv_data->deleted = 1;
+			scsi_remove_target(&raid_device->starget->dev);
+		}
+		printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), wwid"
+		    "(0x%016llx)\n", ioc->name,  raid_device->handle,
+		    (unsigned long long) raid_device->wwid);
+		_scsih_raid_device_remove(ioc, raid_device);
+	}
+
 	/* free ports attached to the sas_host */
  retry_again:
 	list_for_each_entry(mpt2sas_port,
@@ -6373,6 +6569,13 @@ static struct pci_driver scsih_driver = {
 #endif
 };
 
+/* raid transport support */
+static struct raid_function_template mpt2sas_raid_functions = {
+	.cookie		= &scsih_driver_template,
+	.is_raid	= _scsih_is_raid,
+	.get_resync	= _scsih_get_resync,
+	.get_state	= _scsih_get_state,
+};
 
 /**
  * _scsih_init - main entry point for this driver.
@@ -6392,6 +6595,12 @@ _scsih_init(void)
 	    sas_attach_transport(&mpt2sas_transport_functions);
 	if (!mpt2sas_transport_template)
 		return -ENODEV;
+	/* raid transport support */
+	mpt2sas_raid_template = raid_class_attach(&mpt2sas_raid_functions);
+	if (!mpt2sas_raid_template) {
+		sas_release_transport(mpt2sas_transport_template);
+		return -ENODEV;
+	}
 
 	mpt2sas_base_initialize_callback_handler();
 
@@ -6426,8 +6635,11 @@ _scsih_init(void)
 	mpt2sas_ctl_init();
 
 	error = pci_register_driver(&scsih_driver);
-	if (error)
+	if (error) {
+		/* raid transport support */
+		raid_class_release(mpt2sas_raid_template);
 		sas_release_transport(mpt2sas_transport_template);
+	}
 
 	return error;
 }
@@ -6445,7 +6657,8 @@ _scsih_exit(void)
 
 	pci_unregister_driver(&scsih_driver);
 
-	sas_release_transport(mpt2sas_transport_template);
+	mpt2sas_ctl_exit();
+
 	mpt2sas_base_release_callback_handler(scsi_io_cb_idx);
 	mpt2sas_base_release_callback_handler(tm_cb_idx);
 	mpt2sas_base_release_callback_handler(base_cb_idx);
@@ -6457,7 +6670,10 @@ _scsih_exit(void)
 	mpt2sas_base_release_callback_handler(tm_tr_cb_idx);
 	mpt2sas_base_release_callback_handler(tm_sas_control_cb_idx);
 
-	mpt2sas_ctl_exit();
+	/* raid transport support */
+	raid_class_release(mpt2sas_raid_template);
+	sas_release_transport(mpt2sas_transport_template);
+
 }
 
 module_init(_scsih_init);