diff options
Diffstat (limited to 'drivers/scsi/mpt2sas/mpt2sas_scsih.c')
| -rw-r--r-- | drivers/scsi/mpt2sas/mpt2sas_scsih.c | 820 |
1 files changed, 511 insertions, 309 deletions
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 2e9a4445596..86ab32d7ab1 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -2,7 +2,7 @@ * Scsi Host Layer for MPT (Message Passing Technology) based controllers * * This code is based on drivers/scsi/mpt2sas/mpt2_scsih.c - * Copyright (C) 2007-2008 LSI Corporation + * Copyright (C) 2007-2009 LSI Corporation * (mailto:DL-MPTFusionLinux@lsi.com) * * This program is free software; you can redistribute it and/or @@ -79,6 +79,9 @@ static u8 transport_cb_idx = -1; static u8 config_cb_idx = -1; static int mpt_ids; +static u8 tm_tr_cb_idx = -1 ; +static u8 tm_sas_control_cb_idx = -1; + /* command line options */ static u32 logging_level; MODULE_PARM_DESC(logging_level, " bits for enabling additional logging info " @@ -103,13 +106,13 @@ struct sense_info { }; -#define MPT2SAS_RESCAN_AFTER_HOST_RESET (0xFFFF) /** * struct fw_event_work - firmware event struct * @list: link list framework * @work: work object (ioc->fault_reset_work_q) * @ioc: per adapter object * @VF_ID: virtual function id + * @VP_ID: virtual port id * @host_reset_handling: handling events during host reset * @ignore: flag meaning this event has been marked to ignore * @event: firmware event MPI2_EVENT_XXX defined in mpt2_ioc.h @@ -122,6 +125,7 @@ struct fw_event_work { struct work_struct work; struct MPT2SAS_ADAPTER *ioc; u8 VF_ID; + u8 VP_ID; u8 host_reset_handling; u8 ignore; u16 event; @@ -139,8 +143,10 @@ struct fw_event_work { * @lun: lun number * @cdb_length: cdb length * @cdb: cdb contents - * @valid_reply: flag set for reply message * @timeout: timeout for this command + * @VF_ID: virtual function id + * @VP_ID: virtual port id + * @valid_reply: flag set for reply message * @sense_length: sense length * @ioc_status: ioc status * @scsi_state: scsi state @@ -162,6 +168,8 @@ struct _scsi_io_transfer { u8 cdb_length; u8 cdb[32]; u8 timeout; + u8 VF_ID; + u8 VP_ID; u8 valid_reply; /* the following bits are only valid when 'valid_reply = 1' */ u32 sense_length; @@ -757,66 +765,16 @@ _scsih_is_end_device(u32 device_info) } /** - * _scsih_scsi_lookup_get - returns scmd entry + * mptscsih_get_scsi_lookup - returns scmd entry * @ioc: per adapter object * @smid: system request message index - * Context: This function will acquire ioc->scsi_lookup_lock. * * Returns the smid stored scmd pointer. */ static struct scsi_cmnd * _scsih_scsi_lookup_get(struct MPT2SAS_ADAPTER *ioc, u16 smid) { - unsigned long flags; - struct scsi_cmnd *scmd; - - spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); - scmd = ioc->scsi_lookup[smid - 1].scmd; - spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); - return scmd; -} - -/** - * mptscsih_getclear_scsi_lookup - returns scmd entry - * @ioc: per adapter object - * @smid: system request message index - * Context: This function will acquire ioc->scsi_lookup_lock. - * - * Returns the smid stored scmd pointer, as well as clearing the scmd pointer. - */ -static struct scsi_cmnd * -_scsih_scsi_lookup_getclear(struct MPT2SAS_ADAPTER *ioc, u16 smid) -{ - unsigned long flags; - struct scsi_cmnd *scmd; - - spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); - scmd = ioc->scsi_lookup[smid - 1].scmd; - ioc->scsi_lookup[smid - 1].scmd = NULL; - spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); - return scmd; -} - -/** - * _scsih_scsi_lookup_set - updates scmd entry in lookup - * @ioc: per adapter object - * @smid: system request message index - * @scmd: pointer to scsi command object - * Context: This function will acquire ioc->scsi_lookup_lock. - * - * This will save scmd pointer in the scsi_lookup array. - * - * Return nothing. - */ -static void -_scsih_scsi_lookup_set(struct MPT2SAS_ADAPTER *ioc, u16 smid, - struct scsi_cmnd *scmd) -{ - unsigned long flags; - - spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); - ioc->scsi_lookup[smid - 1].scmd = scmd; - spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return ioc->scsi_lookup[smid - 1].scmd; } /** @@ -839,9 +797,9 @@ _scsih_scsi_lookup_find_by_scmd(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); smid = 0; - for (i = 0; i < ioc->request_depth; i++) { + for (i = 0; i < ioc->scsiio_depth; i++) { if (ioc->scsi_lookup[i].scmd == scmd) { - smid = i + 1; + smid = ioc->scsi_lookup[i].smid; goto out; } } @@ -870,7 +828,7 @@ _scsih_scsi_lookup_find_by_target(struct MPT2SAS_ADAPTER *ioc, int id, spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); found = 0; - for (i = 0 ; i < ioc->request_depth; i++) { + for (i = 0 ; i < ioc->scsiio_depth; i++) { if (ioc->scsi_lookup[i].scmd && (ioc->scsi_lookup[i].scmd->device->id == id && ioc->scsi_lookup[i].scmd->device->channel == channel)) { @@ -904,7 +862,7 @@ _scsih_scsi_lookup_find_by_lun(struct MPT2SAS_ADAPTER *ioc, int id, spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); found = 0; - for (i = 0 ; i < ioc->request_depth; i++) { + for (i = 0 ; i < ioc->scsiio_depth; i++) { if (ioc->scsi_lookup[i].scmd && (ioc->scsi_lookup[i].scmd->device->id == id && ioc->scsi_lookup[i].scmd->device->channel == channel && @@ -1114,7 +1072,7 @@ _scsih_change_queue_depth(struct scsi_device *sdev, int qdepth) } /** - * _scsih_change_queue_depth - changing device queue tag type + * _scsih_change_queue_type - changing device queue tag type * @sdev: scsi device struct * @tag_type: requested tag type * @@ -1502,7 +1460,13 @@ _scsih_slave_configure(struct scsi_device *sdev) break; case MPI2_RAID_VOL_TYPE_RAID1E: qdepth = MPT2SAS_RAID_QUEUE_DEPTH; - r_level = "RAID1E"; + if (ioc->manu_pg10.OEMIdentifier && + (ioc->manu_pg10.GenericFlags0 & + MFG10_GF0_R10_DISPLAY) && + !(raid_device->num_pds % 2)) + r_level = "RAID10"; + else + r_level = "RAID1E"; break; case MPI2_RAID_VOL_TYPE_RAID1: qdepth = MPT2SAS_RAID_QUEUE_DEPTH; @@ -1674,23 +1638,24 @@ _scsih_response_code(struct MPT2SAS_ADAPTER *ioc, u8 response_code) * _scsih_tm_done - tm completion routine * @ioc: per adapter object * @smid: system request message index - * @VF_ID: virtual function id + * @msix_index: MSIX table index supplied by the OS * @reply: reply message frame(lower 32bit addr) * Context: none. * * The callback handler when using scsih_issue_tm. * - * Return nothing. + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. */ -static void -_scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) +static u8 +_scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) { MPI2DefaultReply_t *mpi_reply; if (ioc->tm_cmds.status == MPT2_CMD_NOT_USED) - return; + return 1; if (ioc->tm_cmds.smid != smid) - return; + return 1; ioc->tm_cmds.status |= MPT2_CMD_COMPLETE; mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); if (mpi_reply) { @@ -1699,6 +1664,7 @@ _scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) } ioc->tm_cmds.status &= ~MPT2_CMD_PENDING; complete(&ioc->tm_cmds.done); + return 1; } /** @@ -1785,18 +1751,18 @@ mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun, u16 smid = 0; u32 ioc_state; unsigned long timeleft; - u8 VF_ID = 0; - unsigned long flags; - spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); - if (ioc->tm_cmds.status != MPT2_CMD_NOT_USED || - ioc->shost_recovery) { - spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->tm_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_INFO_FMT "%s: tm_cmd busy!!!\n", + __func__, ioc->name); + return; + } + + if (ioc->shost_recovery) { printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n", __func__, ioc->name); return; } - spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); ioc_state = mpt2sas_base_get_iocstate(ioc, 0); if (ioc_state & MPI2_DOORBELL_USED) { @@ -1811,7 +1777,7 @@ mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun, goto issue_host_reset; } - smid = mpt2sas_base_get_smid(ioc, ioc->tm_cb_idx); + smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_cb_idx); if (!smid) { printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", ioc->name, __func__); @@ -1819,7 +1785,8 @@ mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun, } dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "sending tm: handle(0x%04x)," - " task_type(0x%02x), smid(%d)\n", ioc->name, handle, type, smid)); + " task_type(0x%02x), smid(%d)\n", ioc->name, handle, type, + smid_task)); ioc->tm_cmds.status = MPT2_CMD_PENDING; mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); ioc->tm_cmds.smid = smid; @@ -1828,9 +1795,12 @@ mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun, mpi_request->DevHandle = cpu_to_le16(handle); mpi_request->TaskType = type; mpi_request->TaskMID = cpu_to_le16(smid_task); + mpi_request->VP_ID = 0; /* TODO */ + mpi_request->VF_ID = 0; int_to_scsilun(lun, (struct scsi_lun *)mpi_request->LUN); mpt2sas_scsih_set_tm_flag(ioc, handle); - mpt2sas_base_put_smid_hi_priority(ioc, smid, VF_ID); + init_completion(&ioc->tm_cmds.done); + mpt2sas_base_put_smid_hi_priority(ioc, smid); timeleft = wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ); mpt2sas_scsih_clear_tm_flag(ioc, handle); if (!(ioc->tm_cmds.status & MPT2_CMD_COMPLETE)) { @@ -2068,7 +2038,7 @@ _scsih_target_reset(struct scsi_cmnd *scmd) } /** - * _scsih_abort - eh threads main host reset routine + * _scsih_host_reset - eh threads main host reset routine * @sdev: scsi device struct * * Returns SUCCESS if command aborted else FAILED @@ -2222,7 +2192,7 @@ _scsih_ublock_io_device(struct MPT2SAS_ADAPTER *ioc, u16 handle) MPT2SAS_INFO_FMT "SDEV_RUNNING: " "handle(0x%04x)\n", ioc->name, handle)); sas_device_priv_data->block = 0; - scsi_device_set_state(sdev, SDEV_RUNNING); + scsi_internal_device_unblock(sdev); } } } @@ -2251,7 +2221,7 @@ _scsih_block_io_device(struct MPT2SAS_ADAPTER *ioc, u16 handle) MPT2SAS_INFO_FMT "SDEV_BLOCK: " "handle(0x%04x)\n", ioc->name, handle)); sas_device_priv_data->block = 1; - scsi_device_set_state(sdev, SDEV_BLOCK); + scsi_internal_device_block(sdev); } } } @@ -2327,6 +2297,7 @@ _scsih_block_io_to_children_attached_directly(struct MPT2SAS_ADAPTER *ioc, u16 handle; u16 reason_code; u8 phy_number; + u8 link_rate; for (i = 0; i < event_data->NumEntries; i++) { handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); @@ -2337,7 +2308,237 @@ _scsih_block_io_to_children_attached_directly(struct MPT2SAS_ADAPTER *ioc, MPI2_EVENT_SAS_TOPO_RC_MASK; if (reason_code == MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING) _scsih_block_io_device(ioc, handle); + if (reason_code == MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED) { + link_rate = event_data->PHY[i].LinkRate >> 4; + if (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5) + _scsih_ublock_io_device(ioc, handle); + } + } +} + +/** + * _scsih_tm_tr_send - send task management request + * @ioc: per adapter object + * @handle: device handle + * Context: interrupt time. + * + * This code is to initiate the device removal handshake protocal + * with controller firmware. This function will issue target reset + * using high priority request queue. It will send a sas iounit + * controll request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion. + * + * This is designed to send muliple task management request at the same + * time to the fifo. If the fifo is full, we will append the request, + * and process it in a future completion. + */ +static void +_scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + Mpi2SCSITaskManagementRequest_t *mpi_request; + struct MPT2SAS_TARGET *sas_target_priv_data; + u16 smid; + struct _sas_device *sas_device; + unsigned long flags; + struct _tr_list *delayed_tr; + + if (ioc->shost_recovery) { + printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n", + __func__, ioc->name); + return; + } + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + if (!sas_device) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + printk(MPT2SAS_ERR_FMT "%s: failed finding sas_device\n", + ioc->name, __func__); + return; + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + /* skip is hidden raid component */ + if (sas_device->hidden_raid_component) + return; + + smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_cb_idx); + if (!smid) { + delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC); + if (!delayed_tr) + return; + INIT_LIST_HEAD(&delayed_tr->list); + delayed_tr->handle = handle; + delayed_tr->state = MPT2SAS_REQ_SAS_CNTRL; + list_add_tail(&delayed_tr->list, + &ioc->delayed_tr_list); + if (sas_device->starget) + dewtprintk(ioc, starget_printk(KERN_INFO, + sas_device->starget, "DELAYED:tr:handle(0x%04x), " + "(open)\n", sas_device->handle)); + return; + } + + if (sas_device->starget && sas_device->starget->hostdata) { + sas_target_priv_data = sas_device->starget->hostdata; + sas_target_priv_data->tm_busy = 1; + dewtprintk(ioc, starget_printk(KERN_INFO, sas_device->starget, + "tr:handle(0x%04x), (open)\n", sas_device->handle)); + } + + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t)); + mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT; + mpi_request->DevHandle = cpu_to_le16(handle); + mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET; + sas_device->state |= MPTSAS_STATE_TR_SEND; + sas_device->state |= MPT2SAS_REQ_SAS_CNTRL; + mpt2sas_base_put_smid_hi_priority(ioc, smid); +} + + + +/** + * _scsih_sas_control_complete - completion routine + * @ioc: per adapter object + * @smid: system request message index + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * Context: interrupt time. + * + * This is the sas iounit controll completion routine. + * This code is part of the code to initiate the device removal + * handshake protocal with controller firmware. + * + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. + */ +static u8 +_scsih_sas_control_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, + u8 msix_index, u32 reply) +{ + unsigned long flags; + u16 handle; + struct _sas_device *sas_device; + Mpi2SasIoUnitControlReply_t *mpi_reply = + mpt2sas_base_get_reply_virt_addr(ioc, reply); + + handle = le16_to_cpu(mpi_reply->DevHandle); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + if (!sas_device) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + printk(MPT2SAS_ERR_FMT "%s: failed finding sas_device\n", + ioc->name, __func__); + return 1; + } + sas_device->state |= MPTSAS_STATE_CNTRL_COMPLETE; + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + if (sas_device->starget) + dewtprintk(ioc, starget_printk(KERN_INFO, sas_device->starget, + "sc_complete:handle(0x%04x), " + "ioc_status(0x%04x), loginfo(0x%08x)\n", + handle, le16_to_cpu(mpi_reply->IOCStatus), + le32_to_cpu(mpi_reply->IOCLogInfo))); + return 1; +} + +/** + * _scsih_tm_tr_complete - + * @ioc: per adapter object + * @smid: system request message index + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * Context: interrupt time. + * + * This is the target reset completion routine. + * This code is part of the code to initiate the device removal + * handshake protocal with controller firmware. + * It will send a sas iounit controll request (MPI2_SAS_OP_REMOVE_DEVICE) + * + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. + */ +static u8 +_scsih_tm_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, + u32 reply) +{ + unsigned long flags; + u16 handle; + struct _sas_device *sas_device; + Mpi2SCSITaskManagementReply_t *mpi_reply = + mpt2sas_base_get_reply_virt_addr(ioc, reply); + Mpi2SasIoUnitControlRequest_t *mpi_request; + u16 smid_sas_ctrl; + struct MPT2SAS_TARGET *sas_target_priv_data; + struct _tr_list *delayed_tr; + u8 rc; + + handle = le16_to_cpu(mpi_reply->DevHandle); + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + if (!sas_device) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + printk(MPT2SAS_ERR_FMT "%s: failed finding sas_device\n", + ioc->name, __func__); + return 1; } + sas_device->state |= MPTSAS_STATE_TR_COMPLETE; + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + if (sas_device->starget) + dewtprintk(ioc, starget_printk(KERN_INFO, sas_device->starget, + "tr_complete:handle(0x%04x), (%s) ioc_status(0x%04x), " + "loginfo(0x%08x), completed(%d)\n", + sas_device->handle, (sas_device->state & + MPT2SAS_REQ_SAS_CNTRL) ? "open" : "active", + le16_to_cpu(mpi_reply->IOCStatus), + le32_to_cpu(mpi_reply->IOCLogInfo), + le32_to_cpu(mpi_reply->TerminationCount))); + + if (sas_device->starget && sas_device->starget->hostdata) { + sas_target_priv_data = sas_device->starget->hostdata; + sas_target_priv_data->tm_busy = 0; + } + + if (!list_empty(&ioc->delayed_tr_list)) { + delayed_tr = list_entry(ioc->delayed_tr_list.next, + struct _tr_list, list); + mpt2sas_base_free_smid(ioc, smid); + if (delayed_tr->state & MPT2SAS_REQ_SAS_CNTRL) + _scsih_tm_tr_send(ioc, delayed_tr->handle); + list_del(&delayed_tr->list); + kfree(delayed_tr); + rc = 0; /* tells base_interrupt not to free mf */ + } else + rc = 1; + + + if (!(sas_device->state & MPT2SAS_REQ_SAS_CNTRL)) + return rc; + + if (ioc->shost_recovery) { + printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n", + __func__, ioc->name); + return rc; + } + + smid_sas_ctrl = mpt2sas_base_get_smid(ioc, ioc->tm_sas_control_cb_idx); + if (!smid_sas_ctrl) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + return rc; + } + + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid_sas_ctrl); + memset(mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t)); + mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL; + mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE; + mpi_request->DevHandle = mpi_reply->DevHandle; + sas_device->state |= MPTSAS_STATE_CNTRL_SEND; + mpt2sas_base_put_smid_default(ioc, smid_sas_ctrl); + return rc; } /** @@ -2362,6 +2563,21 @@ _scsih_check_topo_delete_events(struct MPT2SAS_ADAPTER *ioc, u16 expander_handle; struct _sas_node *sas_expander; unsigned long flags; + int i, reason_code; + u16 handle; + + for (i = 0 ; i < event_data->NumEntries; i++) { + if (event_data->PHY[i].PhyStatus & + MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT) + continue; + handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); + if (!handle) + continue; + reason_code = event_data->PHY[i].PhyStatus & + MPI2_EVENT_SAS_TOPO_RC_MASK; + if (reason_code == MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING) + _scsih_tm_tr_send(ioc, handle); + } expander_handle = le16_to_cpu(event_data->ExpanderDevHandle); if (expander_handle < ioc->sas_hba.num_phys) { @@ -2405,27 +2621,6 @@ _scsih_check_topo_delete_events(struct MPT2SAS_ADAPTER *ioc, } /** - * _scsih_queue_rescan - queue a topology rescan from user context - * @ioc: per adapter object - * - * Return nothing. - */ -static void -_scsih_queue_rescan(struct MPT2SAS_ADAPTER *ioc) -{ - struct fw_event_work *fw_event; - - if (ioc->wait_for_port_enable_to_complete) - return; - fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); - if (!fw_event) - return; - fw_event->event = MPT2SAS_RESCAN_AFTER_HOST_RESET; - fw_event->ioc = ioc; - _scsih_fw_event_add(ioc, fw_event); -} - -/** * _scsih_flush_running_cmds - completing outstanding commands. * @ioc: per adapter object * @@ -2441,8 +2636,8 @@ _scsih_flush_running_cmds(struct MPT2SAS_ADAPTER *ioc) u16 smid; u16 count = 0; - for (smid = 1; smid <= ioc->request_depth; smid++) { - scmd = _scsih_scsi_lookup_getclear(ioc, smid); + for (smid = 1; smid <= ioc->scsiio_depth; smid++) { + scmd = _scsih_scsi_lookup_get(ioc, smid); if (!scmd) continue; count++; @@ -2456,46 +2651,6 @@ _scsih_flush_running_cmds(struct MPT2SAS_ADAPTER *ioc) } /** - * mpt2sas_scsih_reset_handler - reset callback handler (for scsih) - * @ioc: per adapter object - * @reset_phase: phase - * - * The handler for doing any required cleanup or initialization. - * - * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET, - * MPT2_IOC_DONE_RESET - * - * Return nothing. - */ -void -mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) -{ - switch (reset_phase) { - case MPT2_IOC_PRE_RESET: - dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " - "MPT2_IOC_PRE_RESET\n", ioc->name, __func__)); - _scsih_fw_event_off(ioc); - break; - case MPT2_IOC_AFTER_RESET: - dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " - "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__)); - if (ioc->tm_cmds.status & MPT2_CMD_PENDING) { - ioc->tm_cmds.status |= MPT2_CMD_RESET; - mpt2sas_base_free_smid(ioc, ioc->tm_cmds.smid); - complete(&ioc->tm_cmds.done); - } - _scsih_fw_event_on(ioc); - _scsih_flush_running_cmds(ioc); - break; - case MPT2_IOC_DONE_RESET: - dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " - "MPT2_IOC_DONE_RESET\n", ioc->name, __func__)); - _scsih_queue_rescan(ioc); - break; - } -} - -/** * _scsih_setup_eedp - setup MPI request for EEDP transfer * @scmd: pointer to scsi command object * @mpi_request: pointer to the SCSI_IO reqest message frame @@ -2615,7 +2770,6 @@ _scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *)) Mpi2SCSIIORequest_t *mpi_request; u32 mpi_control; u16 smid; - unsigned long flags; scmd->scsi_done = done; sas_device_priv_data = scmd->device->hostdata; @@ -2634,13 +2788,10 @@ _scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *)) } /* see if we are busy with task managment stuff */ - spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); - if (sas_target_priv_data->tm_busy || - ioc->shost_recovery || ioc->ioc_link_reset_in_progress) { - spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + if (sas_target_priv_data->tm_busy) + return SCSI_MLQUEUE_DEVICE_BUSY; + else if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress) return SCSI_MLQUEUE_HOST_BUSY; - } - spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); if (scmd->sc_data_direction == DMA_FROM_DEVICE) mpi_control = MPI2_SCSIIO_CONTROL_READ; @@ -2668,7 +2819,7 @@ _scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *)) if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON)) mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON; - smid = mpt2sas_base_get_smid(ioc, ioc->scsi_io_cb_idx); + smid = mpt2sas_base_get_smid_scsiio(ioc, ioc->scsi_io_cb_idx, scmd); if (!smid) { printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", ioc->name, __func__); @@ -2695,7 +2846,8 @@ _scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *)) mpi_request->SGLOffset0 = offsetof(Mpi2SCSIIORequest_t, SGL) / 4; mpi_request->SGLFlags = cpu_to_le16(MPI2_SCSIIO_SGLFLAGS_TYPE_MPI + MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR); - + mpi_request->VF_ID = 0; /* TODO */ + mpi_request->VP_ID = 0; int_to_scsilun(sas_device_priv_data->lun, (struct scsi_lun *) mpi_request->LUN); memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len); @@ -2709,8 +2861,7 @@ _scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *)) } } - _scsih_scsi_lookup_set(ioc, smid, scmd); - mpt2sas_base_put_smid_scsi_io(ioc, smid, 0, + mpt2sas_base_put_smid_scsi_io(ioc, smid, sas_device_priv_data->sas_target->handle); return 0; @@ -3006,15 +3157,16 @@ _scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle) * _scsih_io_done - scsi request callback * @ioc: per adapter object * @smid: system request message index - * @VF_ID: virtual function id + * @msix_index: MSIX table index supplied by the OS * @reply: reply message frame(lower 32bit addr) * - * Callback handler when using scsih_qcmd. + * Callback handler when using _scsih_qcmd. * - * Return nothing. + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. */ -static void -_scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) +static u8 +_scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) { Mpi2SCSIIORequest_t *mpi_request; Mpi2SCSIIOReply_t *mpi_reply; @@ -3028,9 +3180,9 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) u32 response_code; mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); - scmd = _scsih_scsi_lookup_getclear(ioc, smid); + scmd = _scsih_scsi_lookup_get(ioc, smid); if (scmd == NULL) - return; + return 1; mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); @@ -3186,25 +3338,7 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) out: scsi_dma_unmap(scmd); scmd->scsi_done(scmd); -} - -/** - * _scsih_link_change - process phy link changes - * @ioc: per adapter object - * @handle: phy handle - * @attached_handle: valid for devices attached to link - * @phy_number: phy number - * @link_rate: new link rate - * Context: user. - * - * Return nothing. - */ -static void -_scsih_link_change(struct MPT2SAS_ADAPTER *ioc, u16 handle, u16 attached_handle, - u8 phy_number, u8 link_rate) -{ - mpt2sas_transport_update_phy_link_change(ioc, handle, attached_handle, - phy_number, link_rate); + return 1; } /** @@ -3251,7 +3385,8 @@ _scsih_sas_host_refresh(struct MPT2SAS_ADAPTER *ioc, u8 update) le16_to_cpu(sas_iounit_pg0->PhyData[i]. ControllerDevHandle); if (update) - _scsih_link_change(ioc, + mpt2sas_transport_update_links( + ioc, ioc->sas_hba.phy[i].handle, le16_to_cpu(sas_iounit_pg0->PhyData[i]. AttachedDevHandle), i, @@ -3436,6 +3571,9 @@ _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle) if (!handle) return -1; + if (ioc->shost_recovery) + return -1; + if ((mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0, MPI2_SAS_EXPAND_PGAD_FORM_HNDL, handle))) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", @@ -3465,9 +3603,8 @@ _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle) } } - sas_address = le64_to_cpu(expander_pg0.SASAddress); - spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_address = le64_to_cpu(expander_pg0.SASAddress); sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc, sas_address); spin_unlock_irqrestore(&ioc->sas_node_lock, flags); @@ -3572,6 +3709,9 @@ _scsih_expander_remove(struct MPT2SAS_ADAPTER *ioc, u16 handle) struct _sas_node *sas_expander; unsigned long flags; + if (ioc->shost_recovery) + return; + spin_lock_irqsave(&ioc->sas_node_lock, flags); sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc, handle); spin_unlock_irqrestore(&ioc->sas_node_lock, flags); @@ -3730,6 +3870,12 @@ _scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, u16 handle) if (ioc->remove_host) goto out; + if ((sas_device->state & MPTSAS_STATE_TR_COMPLETE)) { + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "\tskip " + "target_reset handle(0x%04x)\n", ioc->name, handle)); + goto skip_tr; + } + /* Target Reset to flush out all the outstanding IO */ device_handle = (sas_device->hidden_raid_component) ? sas_device->volume_handle : handle; @@ -3743,6 +3889,15 @@ _scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, u16 handle) mutex_unlock(&ioc->tm_cmds.mutex); dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "issue target reset " "done: handle(0x%04x)\n", ioc->name, device_handle)); + if (ioc->shost_recovery) + goto out; + } + skip_tr: + + if ((sas_device->state & MPTSAS_STATE_CNTRL_COMPLETE)) { + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "\tskip " + "sas_cntrl handle(0x%04x)\n", ioc->name, handle)); + goto out; } /* SAS_IO_UNIT_CNTR - send REMOVE_DEVICE */ @@ -3752,7 +3907,8 @@ _scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, u16 handle) mpi_request.Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL; mpi_request.Operation = MPI2_SAS_OP_REMOVE_DEVICE; mpi_request.DevHandle = handle; - mpi_request.VF_ID = 0; + mpi_request.VF_ID = 0; /* TODO */ + mpi_request.VP_ID = 0; if ((mpt2sas_base_sas_iounit_control(ioc, &mpi_reply, &mpi_request)) != 0) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", @@ -3765,6 +3921,9 @@ _scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, u16 handle) le32_to_cpu(mpi_reply.IOCLogInfo))); out: + + _scsih_ublock_io_device(ioc, handle); + mpt2sas_transport_port_remove(ioc, sas_device->sas_address, sas_device->parent_handle); @@ -3859,15 +4018,12 @@ _scsih_sas_topology_change_event_debug(struct MPT2SAS_ADAPTER *ioc, /** * _scsih_sas_topology_change_event - handle topology changes * @ioc: per adapter object - * @VF_ID: - * @event_data: event data payload - * fw_event: + * @fw_event: The fw_event_work object * Context: user. * */ static void -_scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, - Mpi2EventDataSasTopologyChangeList_t *event_data, +_scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) { int i; @@ -3877,6 +4033,7 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, struct _sas_node *sas_expander; unsigned long flags; u8 link_rate_; + Mpi2EventDataSasTopologyChangeList_t *event_data = fw_event->event_data; #ifdef CONFIG_SCSI_MPT2SAS_LOGGING if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) @@ -3908,24 +4065,28 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, "expander event\n", ioc->name)); return; } - if (event_data->PHY[i].PhyStatus & - MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT) + if (ioc->shost_recovery) + return; + phy_number = event_data->StartPhyNum + i; + reason_code = event_data->PHY[i].PhyStatus & + MPI2_EVENT_SAS_TOPO_RC_MASK; + if ((event_data->PHY[i].PhyStatus & + MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT) && (reason_code != + MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING)) continue; handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); if (!handle) continue; - phy_number = event_data->StartPhyNum + i; - reason_code = event_data->PHY[i].PhyStatus & - MPI2_EVENT_SAS_TOPO_RC_MASK; link_rate_ = event_data->PHY[i].LinkRate >> 4; switch (reason_code) { case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED: case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED: if (!parent_handle) { if (phy_number < ioc->sas_hba.num_phys) - _scsih_link_change(ioc, - ioc->sas_hba.phy[phy_number].handle, - handle, phy_number, link_rate_); + mpt2sas_transport_update_links( + ioc, + ioc->sas_hba.phy[phy_number].handle, + handle, phy_number, link_rate_); } else { spin_lock_irqsave(&ioc->sas_node_lock, flags); sas_expander = @@ -3935,17 +4096,14 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, flags); if (sas_expander) { if (phy_number < sas_expander->num_phys) - _scsih_link_change(ioc, - sas_expander-> - phy[phy_number].handle, - handle, phy_number, - link_rate_); + mpt2sas_transport_update_links( + ioc, + sas_expander-> + phy[phy_number].handle, + handle, phy_number, + link_rate_); } } - if (reason_code == MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED) { - if (link_rate_ >= MPI2_SAS_NEG_LINK_RATE_1_5) - _scsih_ublock_io_device(ioc, handle); - } if (reason_code == MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED) { if (link_rate_ < MPI2_SAS_NEG_LINK_RATE_1_5) break; @@ -4030,19 +4188,19 @@ _scsih_sas_device_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc, /** * _scsih_sas_device_status_change_event - handle device status change * @ioc: per adapter object - * @VF_ID: - * @event_data: event data payload + * @fw_event: The fw_event_work object * Context: user. * * Return nothing. */ static void -_scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, - Mpi2EventDataSasDeviceStatusChange_t *event_data) +_scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc, + struct fw_event_work *fw_event) { #ifdef CONFIG_SCSI_MPT2SAS_LOGGING if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) - _scsih_sas_device_status_change_event_debug(ioc, event_data); + _scsih_sas_device_status_change_event_debug(ioc, + fw_event->event_data); #endif } @@ -4085,34 +4243,33 @@ _scsih_sas_enclosure_dev_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc, /** * _scsih_sas_enclosure_dev_status_change_event - handle enclosure events * @ioc: per adapter object - * @VF_ID: - * @event_data: event data payload + * @fw_event: The fw_event_work object * Context: user. * * Return nothing. */ static void _scsih_sas_enclosure_dev_status_change_event(struct MPT2SAS_ADAPTER *ioc, - u8 VF_ID, Mpi2EventDataSasEnclDevStatusChange_t *event_data) + struct fw_event_work *fw_event) { #ifdef CONFIG_SCSI_MPT2SAS_LOGGING if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) _scsih_sas_enclosure_dev_status_change_event_debug(ioc, - event_data); + fw_event->event_data); #endif } /** * _scsih_sas_broadcast_primative_event - handle broadcast events * @ioc: per adapter object - * @event_data: event data payload + * @fw_event: The fw_event_work object * Context: user. * * Return nothing. */ static void -_scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, - Mpi2EventDataSasBroadcastPrimitive_t *event_data) +_scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, + struct fw_event_work *fw_event) { struct scsi_cmnd *scmd; u16 smid, handle; @@ -4121,11 +4278,12 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 termination_count; u32 query_count; Mpi2SCSITaskManagementReply_t *mpi_reply; - +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + Mpi2EventDataSasBroadcastPrimitive_t *event_data = fw_event->event_data; +#endif dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "broadcast primative: " "phy number(%d), width(%d)\n", ioc->name, event_data->PhyNum, event_data->PortWidth)); - dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name, __func__)); @@ -4133,7 +4291,7 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, termination_count = 0; query_count = 0; mpi_reply = ioc->tm_cmds.reply; - for (smid = 1; smid <= ioc->request_depth; smid++) { + for (smid = 1; smid <= ioc->scsiio_depth; smid++) { scmd = _scsih_scsi_lookup_get(ioc, smid); if (!scmd) continue; @@ -4180,23 +4338,25 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, /** * _scsih_sas_discovery_event - handle discovery events * @ioc: per adapter object - * @event_data: event data payload + * @fw_event: The fw_event_work object * Context: user. * * Return nothing. */ static void -_scsih_sas_discovery_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, - Mpi2EventDataSasDiscovery_t *event_data) +_scsih_sas_discovery_event(struct MPT2SAS_ADAPTER *ioc, + struct fw_event_work *fw_event) { + Mpi2EventDataSasDiscovery_t *event_data = fw_event->event_data; + #ifdef CONFIG_SCSI_MPT2SAS_LOGGING if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) { printk(MPT2SAS_DEBUG_FMT "discovery event: (%s)", ioc->name, (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ? "start" : "stop"); if (event_data->DiscoveryStatus) - printk(MPT2SAS_DEBUG_FMT ", discovery_status(0x%08x)", - ioc->name, le32_to_cpu(event_data->DiscoveryStatus)); + printk("discovery_status(0x%08x)", + le32_to_cpu(event_data->DiscoveryStatus)); printk("\n"); } #endif @@ -4455,7 +4615,7 @@ _scsih_sas_pd_add(struct MPT2SAS_ADAPTER *ioc, return; } - _scsih_link_change(ioc, + mpt2sas_transport_update_links(ioc, le16_to_cpu(sas_device_pg0.ParentDevHandle), handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5); @@ -4547,19 +4707,19 @@ _scsih_sas_ir_config_change_event_debug(struct MPT2SAS_ADAPTER *ioc, /** * _scsih_sas_ir_config_change_event - handle ir configuration change events * @ioc: per adapter object - * @VF_ID: - * @event_data: event data payload + * @fw_event: The fw_event_work object * Context: user. * * Return nothing. */ static void -_scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, - Mpi2EventDataIrConfigChangeList_t *event_data) +_scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc, + struct fw_event_work *fw_event) { Mpi2EventIrConfigElement_t *element; int i; u8 foreign_config; + Mpi2EventDataIrConfigChangeList_t *event_data = fw_event->event_data; #ifdef CONFIG_SCSI_MPT2SAS_LOGGING if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) @@ -4602,14 +4762,14 @@ _scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, /** * _scsih_sas_ir_volume_event - IR volume event * @ioc: per adapter object - * @event_data: event data payload + * @fw_event: The fw_event_work object * Context: user. * * Return nothing. */ static void -_scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, - Mpi2EventDataIrVolume_t *event_data) +_scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc, + struct fw_event_work *fw_event) { u64 wwid; unsigned long flags; @@ -4618,6 +4778,7 @@ _scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 state; int rc; struct MPT2SAS_TARGET *sas_target_priv_data; + Mpi2EventDataIrVolume_t *event_data = fw_event->event_data; if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED) return; @@ -4687,14 +4848,14 @@ _scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, /** * _scsih_sas_ir_physical_disk_event - PD event * @ioc: per adapter object - * @event_data: event data payload + * @fw_event: The fw_event_work object * Context: user. * * Return nothing. */ static void -_scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, - Mpi2EventDataIrPhysicalDisk_t *event_data) +_scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc, + struct fw_event_work *fw_event) { u16 handle; u32 state; @@ -4703,6 +4864,7 @@ _scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, Mpi2ConfigReply_t mpi_reply; Mpi2SasDevicePage0_t sas_device_pg0; u32 ioc_status; + Mpi2EventDataIrPhysicalDisk_t *event_data = fw_event->event_data; if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED) return; @@ -4744,7 +4906,7 @@ _scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, return; } - _scsih_link_change(ioc, + mpt2sas_transport_update_links(ioc, le16_to_cpu(sas_device_pg0.ParentDevHandle), handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5); @@ -4802,33 +4964,33 @@ _scsih_sas_ir_operation_status_event_debug(struct MPT2SAS_ADAPTER *ioc, /** * _scsih_sas_ir_operation_status_event - handle RAID operation events * @ioc: per adapter object - * @VF_ID: - * @event_data: event data payload + * @fw_event: The fw_event_work object * Context: user. * * Return nothing. */ static void -_scsih_sas_ir_operation_status_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, - Mpi2EventDataIrOperationStatus_t *event_data) +_scsih_sas_ir_operation_status_event(struct MPT2SAS_ADAPTER *ioc, + struct fw_event_work *fw_event) { #ifdef CONFIG_SCSI_MPT2SAS_LOGGING if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) - _scsih_sas_ir_operation_status_event_debug(ioc, event_data); + _scsih_sas_ir_operation_status_event_debug(ioc, + fw_event->event_data); #endif } /** * _scsih_task_set_full - handle task set full * @ioc: per adapter object - * @event_data: event data payload + * @fw_event: The fw_event_work object * Context: user. * * Throttle back qdepth. */ static void -_scsih_task_set_full(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, - Mpi2EventDataTaskSetFull_t *event_data) +_scsih_task_set_full(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work + *fw_event) { unsigned long flags; struct _sas_device *sas_device; @@ -4839,6 +5001,7 @@ _scsih_task_set_full(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u16 handle; int id, channel; u64 sas_address; + Mpi2EventDataTaskSetFull_t *event_data = fw_event->event_data; current_depth = le16_to_cpu(event_data->CurrentDepth); handle = le16_to_cpu(event_data->DevHandle); @@ -4927,6 +5090,10 @@ _scsih_mark_responding_sas_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, if (sas_device->sas_address == sas_address && sas_device->slot == slot && sas_device->starget) { sas_device->responding = 1; + sas_device->state = 0; + starget = sas_device->starget; + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->tm_busy = 0; starget_printk(KERN_INFO, sas_device->starget, "handle(0x%04x), sas_addr(0x%016llx), enclosure " "logical id(0x%016llx), slot(%d)\n", handle, @@ -4939,8 +5106,6 @@ _scsih_mark_responding_sas_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n", sas_device->handle); sas_device->handle = handle; - starget = sas_device->starget; - sas_target_priv_data = starget->hostdata; sas_target_priv_data->handle = handle; goto out; } @@ -5156,22 +5321,9 @@ static void _scsih_remove_unresponding_devices(struct MPT2SAS_ADAPTER *ioc) { struct _sas_device *sas_device, *sas_device_next; - struct _sas_node *sas_expander, *sas_expander_next; + struct _sas_node *sas_expander; struct _raid_device *raid_device, *raid_device_next; - unsigned long flags; - - _scsih_search_responding_sas_devices(ioc); - _scsih_search_responding_raid_devices(ioc); - _scsih_search_responding_expanders(ioc); - spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); - ioc->shost_recovery = 0; - if (ioc->shost->shost_state == SHOST_RECOVERY) { - printk(MPT2SAS_INFO_FMT "putting controller into " - "SHOST_RUNNING\n", ioc->name); - scsi_host_set_state(ioc->shost, SHOST_RUNNING); - } - spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); list_for_each_entry_safe(sas_device, sas_device_next, &ioc->sas_device_list, list) { @@ -5207,16 +5359,63 @@ _scsih_remove_unresponding_devices(struct MPT2SAS_ADAPTER *ioc) _scsih_raid_device_remove(ioc, raid_device); } - list_for_each_entry_safe(sas_expander, sas_expander_next, - &ioc->sas_expander_list, list) { + retry_expander_search: + sas_expander = NULL; + list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) { if (sas_expander->responding) { sas_expander->responding = 0; continue; } - printk("\tremoving expander: handle(0x%04x), " - " sas_addr(0x%016llx)\n", sas_expander->handle, - (unsigned long long)sas_expander->sas_address); _scsih_expander_remove(ioc, sas_expander->handle); + goto retry_expander_search; + } +} + +/** + * mpt2sas_scsih_reset_handler - reset callback handler (for scsih) + * @ioc: per adapter object + * @reset_phase: phase + * + * The handler for doing any required cleanup or initialization. + * + * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET, + * MPT2_IOC_DONE_RESET + * + * Return nothing. + */ +void +mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) +{ + switch (reset_phase) { + case MPT2_IOC_PRE_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_PRE_RESET\n", ioc->name, __func__)); + _scsih_fw_event_off(ioc); + break; + case MPT2_IOC_AFTER_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__)); + if (ioc->tm_cmds.status & MPT2_CMD_PENDING) { + ioc->tm_cmds.status |= MPT2_CMD_RESET; + mpt2sas_base_free_smid(ioc, ioc->tm_cmds.smid); + complete(&ioc->tm_cmds.done); + } + _scsih_fw_event_on(ioc); + _scsih_flush_running_cmds(ioc); + break; + case MPT2_IOC_DONE_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_DONE_RESET\n", ioc->name, __func__)); + _scsih_sas_host_refresh(ioc, 0); + _scsih_search_responding_sas_devices(ioc); + _scsih_search_responding_raid_devices(ioc); + _scsih_search_responding_expanders(ioc); + break; + case MPT2_IOC_RUNNING: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_RUNNING\n", ioc->name, __func__)); + _scsih_remove_unresponding_devices(ioc); + break; } } @@ -5236,14 +5435,6 @@ _firmware_event_work(struct work_struct *work) unsigned long flags; struct MPT2SAS_ADAPTER *ioc = fw_event->ioc; - /* This is invoked by calling _scsih_queue_rescan(). */ - if (fw_event->event == MPT2SAS_RESCAN_AFTER_HOST_RESET) { - _scsih_fw_event_free(ioc, fw_event); - _scsih_sas_host_refresh(ioc, 1); - _scsih_remove_unresponding_devices(ioc); - return; - } - /* the queue is being flushed so ignore this event */ spin_lock_irqsave(&ioc->fw_event_lock, flags); if (ioc->fw_events_off || ioc->remove_host) { @@ -5253,54 +5444,45 @@ _firmware_event_work(struct work_struct *work) } spin_unlock_irqrestore(&ioc->fw_event_lock, flags); - spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); if (ioc->shost_recovery) { - spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); _scsih_fw_event_requeue(ioc, fw_event, 1000); return; } - spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); switch (fw_event->event) { case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: - _scsih_sas_topology_change_event(ioc, fw_event->VF_ID, - fw_event->event_data, fw_event); + _scsih_sas_topology_change_event(ioc, fw_event); break; case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: - _scsih_sas_device_status_change_event(ioc, fw_event->VF_ID, - fw_event->event_data); + _scsih_sas_device_status_change_event(ioc, + fw_event); break; case MPI2_EVENT_SAS_DISCOVERY: - _scsih_sas_discovery_event(ioc, fw_event->VF_ID, - fw_event->event_data); + _scsih_sas_discovery_event(ioc, + fw_event); break; case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: - _scsih_sas_broadcast_primative_event(ioc, fw_event->VF_ID, - fw_event->event_data); + _scsih_sas_broadcast_primative_event(ioc, + fw_event); break; case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: _scsih_sas_enclosure_dev_status_change_event(ioc, - fw_event->VF_ID, fw_event->event_data); + fw_event); break; case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: - _scsih_sas_ir_config_change_event(ioc, fw_event->VF_ID, - fw_event->event_data); + _scsih_sas_ir_config_change_event(ioc, fw_event); break; case MPI2_EVENT_IR_VOLUME: - _scsih_sas_ir_volume_event(ioc, fw_event->VF_ID, - fw_event->event_data); + _scsih_sas_ir_volume_event(ioc, fw_event); break; case MPI2_EVENT_IR_PHYSICAL_DISK: - _scsih_sas_ir_physical_disk_event(ioc, fw_event->VF_ID, - fw_event->event_data); + _scsih_sas_ir_physical_disk_event(ioc, fw_event); break; case MPI2_EVENT_IR_OPERATION_STATUS: - _scsih_sas_ir_operation_status_event(ioc, fw_event->VF_ID, - fw_event->event_data); + _scsih_sas_ir_operation_status_event(ioc, fw_event); break; case MPI2_EVENT_TASK_SET_FULL: - _scsih_task_set_full(ioc, fw_event->VF_ID, - fw_event->event_data); + _scsih_task_set_full(ioc, fw_event); break; } _scsih_fw_event_free(ioc, fw_event); @@ -5309,17 +5491,19 @@ _firmware_event_work(struct work_struct *work) /** * mpt2sas_scsih_event_callback - firmware event handler (called at ISR time) * @ioc: per adapter object - * @VF_ID: virtual function id + * @msix_index: MSIX table index supplied by the OS * @reply: reply message frame(lower 32bit addr) * Context: interrupt. * * This function merely adds a new work task into ioc->firmware_event_thread. * The tasks are worked from _firmware_event_work in user context. * - * Return nothing. + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. */ -void -mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply) +u8 +mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, + u32 reply) { struct fw_event_work *fw_event; Mpi2EventNotificationReply_t *mpi_reply; @@ -5330,11 +5514,11 @@ mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply) spin_lock_irqsave(&ioc->fw_event_lock, flags); if (ioc->fw_events_off || ioc->remove_host) { spin_unlock_irqrestore(&ioc->fw_event_lock, flags); - return; + return 1; } spin_unlock_irqrestore(&ioc->fw_event_lock, flags); - mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); event = le16_to_cpu(mpi_reply->Event); switch (event) { @@ -5348,7 +5532,7 @@ mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply) if (baen_data->Primitive != MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT || ioc->broadcast_aen_busy) - return; + return 1; ioc->broadcast_aen_busy = 1; break; } @@ -5370,14 +5554,14 @@ mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply) break; default: /* ignore the rest */ - return; + return 1; } fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); if (!fw_event) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); - return; + return 1; } fw_event->event_data = kzalloc(mpi_reply->EventDataLength*4, GFP_ATOMIC); @@ -5385,15 +5569,17 @@ mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply) printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); kfree(fw_event); - return; + return 1; } memcpy(fw_event->event_data, mpi_reply->EventData, mpi_reply->EventDataLength*4); fw_event->ioc = ioc; - fw_event->VF_ID = VF_ID; + fw_event->VF_ID = mpi_reply->VF_ID; + fw_event->VP_ID = mpi_reply->VP_ID; fw_event->event = event; _scsih_fw_event_add(ioc, fw_event); + return 1; } /* shost template */ @@ -5461,6 +5647,8 @@ _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc, if (!sas_device) continue; _scsih_remove_device(ioc, sas_device->handle); + if (ioc->shost_recovery) + return; goto retry_device_search; } } @@ -5482,6 +5670,8 @@ _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc, if (!expander_sibling) continue; _scsih_expander_remove(ioc, expander_sibling->handle); + if (ioc->shost_recovery) + return; goto retry_expander_search; } } @@ -5649,7 +5839,7 @@ _scsih_probe_raid(struct MPT2SAS_ADAPTER *ioc) } /** - * _scsih_probe_sas - reporting raid volumes to sas transport + * _scsih_probe_sas - reporting sas devices to sas transport * @ioc: per adapter object * * Called during initial loading of the driver. @@ -5746,6 +5936,8 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) ioc->base_cb_idx = base_cb_idx; ioc->transport_cb_idx = transport_cb_idx; ioc->config_cb_idx = config_cb_idx; + ioc->tm_tr_cb_idx = tm_tr_cb_idx; + ioc->tm_sas_control_cb_idx = tm_sas_control_cb_idx; ioc->logging_level = logging_level; /* misc semaphores and spin locks */ spin_lock_init(&ioc->ioc_reset_in_progress_lock); @@ -5761,6 +5953,7 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) INIT_LIST_HEAD(&ioc->fw_event_list); INIT_LIST_HEAD(&ioc->raid_device_list); INIT_LIST_HEAD(&ioc->sas_hba.sas_port_list); + INIT_LIST_HEAD(&ioc->delayed_tr_list); /* init shost parameters */ shost->max_cmd_len = 16; @@ -5777,6 +5970,7 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) scsi_host_set_prot(shost, SHOST_DIF_TYPE1_PROTECTION | SHOST_DIF_TYPE3_PROTECTION); + scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC); /* event thread */ snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name), @@ -5926,6 +6120,11 @@ _scsih_init(void) /* ctl module callback handler */ ctl_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_ctl_done); + tm_tr_cb_idx = mpt2sas_base_register_callback_handler( + _scsih_tm_tr_complete); + tm_sas_control_cb_idx = mpt2sas_base_register_callback_handler( + _scsih_sas_control_complete); + mpt2sas_ctl_init(); error = pci_register_driver(&scsih_driver); @@ -5956,6 +6155,9 @@ _scsih_exit(void) mpt2sas_base_release_callback_handler(config_cb_idx); mpt2sas_base_release_callback_handler(ctl_cb_idx); + mpt2sas_base_release_callback_handler(tm_tr_cb_idx); + mpt2sas_base_release_callback_handler(tm_sas_control_cb_idx); + mpt2sas_ctl_exit(); } |