diff options
Diffstat (limited to 'drivers/scsi/mpt3sas/mpi/mpi2_sas.h')
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_sas.h | 295 |
1 files changed, 295 insertions, 0 deletions
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_sas.h b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h new file mode 100644 index 00000000000..b4e7084aba3 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h @@ -0,0 +1,295 @@ +/* + * Copyright (c) 2000-2012 LSI Corporation. + * + * + * Name: mpi2_sas.h + * Title: MPI Serial Attached SCSI structures and definitions + * Creation Date: February 9, 2007 + * + * mpi2_sas.h Version: 02.00.07 + * + * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 + * prefix are for use only on MPI v2.5 products, and must not be used + * with MPI v2.0 products. Unless otherwise noted, names beginning with + * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit + * Control Request. + * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control + * Request. + * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST + * to MPI2_SGE_IO_UNION since it supports chained SGLs. + * 05-12-10 02.00.04 Modified some comments. + * 08-11-10 02.00.05 Added NCQ operations to SAS IO Unit Control. + * 11-18-11 02.00.06 Incorporating additions for MPI v2.5. + * 07-10-12 02.00.07 Added MPI2_SATA_PT_SGE_UNION for use in the SATA + * Passthrough Request message. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_SAS_H +#define MPI2_SAS_H + +/* + *Values for SASStatus. + */ +#define MPI2_SASSTATUS_SUCCESS (0x00) +#define MPI2_SASSTATUS_UNKNOWN_ERROR (0x01) +#define MPI2_SASSTATUS_INVALID_FRAME (0x02) +#define MPI2_SASSTATUS_UTC_BAD_DEST (0x03) +#define MPI2_SASSTATUS_UTC_BREAK_RECEIVED (0x04) +#define MPI2_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05) +#define MPI2_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06) +#define MPI2_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07) +#define MPI2_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08) +#define MPI2_SASSTATUS_UTC_WRONG_DESTINATION (0x09) +#define MPI2_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A) +#define MPI2_SASSTATUS_LONG_INFORMATION_UNIT (0x0B) +#define MPI2_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C) +#define MPI2_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D) +#define MPI2_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E) +#define MPI2_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F) +#define MPI2_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10) +#define MPI2_SASSTATUS_DATA_OFFSET_ERROR (0x11) +#define MPI2_SASSTATUS_SDSF_NAK_RECEIVED (0x12) +#define MPI2_SASSTATUS_SDSF_CONNECTION_FAILED (0x13) +#define MPI2_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14) + +/* + *Values for the SAS DeviceInfo field used in SAS Device Status Change Event + *data and SAS Configuration pages. + */ +#define MPI2_SAS_DEVICE_INFO_SEP (0x00004000) +#define MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000) +#define MPI2_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000) +#define MPI2_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800) +#define MPI2_SAS_DEVICE_INFO_SSP_TARGET (0x00000400) +#define MPI2_SAS_DEVICE_INFO_STP_TARGET (0x00000200) +#define MPI2_SAS_DEVICE_INFO_SMP_TARGET (0x00000100) +#define MPI2_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080) +#define MPI2_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040) +#define MPI2_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020) +#define MPI2_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010) +#define MPI2_SAS_DEVICE_INFO_SATA_HOST (0x00000008) + +#define MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007) +#define MPI2_SAS_DEVICE_INFO_NO_DEVICE (0x00000000) +#define MPI2_SAS_DEVICE_INFO_END_DEVICE (0x00000001) +#define MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002) +#define MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003) + +/***************************************************************************** +* +* SAS Messages +* +*****************************************************************************/ + +/**************************************************************************** +* SMP Passthrough messages +****************************************************************************/ + +/*SMP Passthrough Request Message */ +typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST { + U8 PassthroughFlags; /*0x00 */ + U8 PhysicalPort; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 RequestDataLength; /*0x04 */ + U8 SGLFlags; /*0x06*//*MPI v2.0 only. Reserved on MPI v2.5*/ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved1; /*0x0A */ + U32 Reserved2; /*0x0C */ + U64 SASAddress; /*0x10 */ + U32 Reserved3; /*0x18 */ + U32 Reserved4; /*0x1C */ + MPI2_SIMPLE_SGE_UNION SGL;/*0x20 */ +} MPI2_SMP_PASSTHROUGH_REQUEST, *PTR_MPI2_SMP_PASSTHROUGH_REQUEST, + Mpi2SmpPassthroughRequest_t, *pMpi2SmpPassthroughRequest_t; + +/*values for PassthroughFlags field */ +#define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80) + +/*MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ + +/*SMP Passthrough Reply Message */ +typedef struct _MPI2_SMP_PASSTHROUGH_REPLY { + U8 PassthroughFlags; /*0x00 */ + U8 PhysicalPort; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 ResponseDataLength; /*0x04 */ + U8 SGLFlags; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved1; /*0x0A */ + U8 Reserved2; /*0x0C */ + U8 SASStatus; /*0x0D */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U32 Reserved3; /*0x14 */ + U8 ResponseData[4]; /*0x18 */ +} MPI2_SMP_PASSTHROUGH_REPLY, *PTR_MPI2_SMP_PASSTHROUGH_REPLY, + Mpi2SmpPassthroughReply_t, *pMpi2SmpPassthroughReply_t; + +/*values for PassthroughFlags field */ +#define MPI2_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80) + +/*values for SASStatus field are at the top of this file */ + +/**************************************************************************** +* SATA Passthrough messages +****************************************************************************/ + +typedef union _MPI2_SATA_PT_SGE_UNION { + MPI2_SGE_SIMPLE_UNION MpiSimple; /*MPI v2.0 only */ + MPI2_SGE_CHAIN_UNION MpiChain; /*MPI v2.0 only */ + MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple; + MPI2_IEEE_SGE_CHAIN_UNION IeeeChain; /*MPI v2.0 only */ + MPI25_IEEE_SGE_CHAIN64 IeeeChain64; /*MPI v2.5 only */ +} MPI2_SATA_PT_SGE_UNION, *PTR_MPI2_SATA_PT_SGE_UNION, + Mpi2SataPTSGEUnion_t, *pMpi2SataPTSGEUnion_t; + +/*SATA Passthrough Request Message */ +typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST { + U16 DevHandle; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 PassthroughFlags; /*0x04 */ + U8 SGLFlags; /*0x06*//*MPI v2.0 only. Reserved on MPI v2.5*/ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved1; /*0x0A */ + U32 Reserved2; /*0x0C */ + U32 Reserved3; /*0x10 */ + U32 Reserved4; /*0x14 */ + U32 DataLength; /*0x18 */ + U8 CommandFIS[20]; /*0x1C */ + MPI2_SATA_PT_SGE_UNION SGL;/*0x30*//*MPI v2.5: IEEE 64 elements only*/ +} MPI2_SATA_PASSTHROUGH_REQUEST, *PTR_MPI2_SATA_PASSTHROUGH_REQUEST, + Mpi2SataPassthroughRequest_t, + *pMpi2SataPassthroughRequest_t; + +/*values for PassthroughFlags field */ +#define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100) +#define MPI2_SATA_PT_REQ_PT_FLAGS_DMA (0x0020) +#define MPI2_SATA_PT_REQ_PT_FLAGS_PIO (0x0010) +#define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004) +#define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002) +#define MPI2_SATA_PT_REQ_PT_FLAGS_READ (0x0001) + +/*MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */ + +/*SATA Passthrough Reply Message */ +typedef struct _MPI2_SATA_PASSTHROUGH_REPLY { + U16 DevHandle; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 PassthroughFlags; /*0x04 */ + U8 SGLFlags; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved1; /*0x0A */ + U8 Reserved2; /*0x0C */ + U8 SASStatus; /*0x0D */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U8 StatusFIS[20]; /*0x14 */ + U32 StatusControlRegisters; /*0x28 */ + U32 TransferCount; /*0x2C */ +} MPI2_SATA_PASSTHROUGH_REPLY, *PTR_MPI2_SATA_PASSTHROUGH_REPLY, + Mpi2SataPassthroughReply_t, *pMpi2SataPassthroughReply_t; + +/*values for SASStatus field are at the top of this file */ + +/**************************************************************************** +* SAS IO Unit Control messages +****************************************************************************/ + +/*SAS IO Unit Control Request Message */ +typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST { + U8 Operation; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 DevHandle; /*0x04 */ + U8 IOCParameter; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved3; /*0x0A */ + U16 Reserved4; /*0x0C */ + U8 PhyNum; /*0x0E */ + U8 PrimFlags; /*0x0F */ + U32 Primitive; /*0x10 */ + U8 LookupMethod; /*0x14 */ + U8 Reserved5; /*0x15 */ + U16 SlotNumber; /*0x16 */ + U64 LookupAddress; /*0x18 */ + U32 IOCParameterValue; /*0x20 */ + U32 Reserved7; /*0x24 */ + U32 Reserved8; /*0x28 */ +} MPI2_SAS_IOUNIT_CONTROL_REQUEST, + *PTR_MPI2_SAS_IOUNIT_CONTROL_REQUEST, + Mpi2SasIoUnitControlRequest_t, + *pMpi2SasIoUnitControlRequest_t; + +/*values for the Operation field */ +#define MPI2_SAS_OP_CLEAR_ALL_PERSISTENT (0x02) +#define MPI2_SAS_OP_PHY_LINK_RESET (0x06) +#define MPI2_SAS_OP_PHY_HARD_RESET (0x07) +#define MPI2_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) +#define MPI2_SAS_OP_SEND_PRIMITIVE (0x0A) +#define MPI2_SAS_OP_FORCE_FULL_DISCOVERY (0x0B) +#define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C) +#define MPI2_SAS_OP_REMOVE_DEVICE (0x0D) +#define MPI2_SAS_OP_LOOKUP_MAPPING (0x0E) +#define MPI2_SAS_OP_SET_IOC_PARAMETER (0x0F) +#define MPI25_SAS_OP_ENABLE_FP_DEVICE (0x10) +#define MPI25_SAS_OP_DISABLE_FP_DEVICE (0x11) +#define MPI25_SAS_OP_ENABLE_FP_ALL (0x12) +#define MPI25_SAS_OP_DISABLE_FP_ALL (0x13) +#define MPI2_SAS_OP_DEV_ENABLE_NCQ (0x14) +#define MPI2_SAS_OP_DEV_DISABLE_NCQ (0x15) +#define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80) + +/*values for the PrimFlags field */ +#define MPI2_SAS_PRIMFLAGS_SINGLE (0x08) +#define MPI2_SAS_PRIMFLAGS_TRIPLE (0x02) +#define MPI2_SAS_PRIMFLAGS_REDUNDANT (0x01) + +/*values for the LookupMethod field */ +#define MPI2_SAS_LOOKUP_METHOD_SAS_ADDRESS (0x01) +#define MPI2_SAS_LOOKUP_METHOD_SAS_ENCLOSURE_SLOT (0x02) +#define MPI2_SAS_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03) + +/*SAS IO Unit Control Reply Message */ +typedef struct _MPI2_SAS_IOUNIT_CONTROL_REPLY { + U8 Operation; /*0x00 */ + U8 Reserved1; /*0x01 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 DevHandle; /*0x04 */ + U8 IOCParameter; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved3; /*0x0A */ + U16 Reserved4; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ +} MPI2_SAS_IOUNIT_CONTROL_REPLY, + *PTR_MPI2_SAS_IOUNIT_CONTROL_REPLY, + Mpi2SasIoUnitControlReply_t, *pMpi2SasIoUnitControlReply_t; + +#endif |