diff options
Diffstat (limited to 'drivers/scsi/mpt3sas/mpt3sas_base.c')
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_base.c | 4840 |
1 files changed, 4840 insertions, 0 deletions
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c new file mode 100644 index 00000000000..04f8010f077 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -0,0 +1,4840 @@ +/* + * This is the Fusion MPT base driver providing common API layer interface + * for access to MPT (Message Passing Technology) firmware. + * + * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c + * Copyright (C) 2012 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/time.h> +#include <linux/kthread.h> +#include <linux/aer.h> + + +#include "mpt3sas_base.h" + +static MPT_CALLBACK mpt_callbacks[MPT_MAX_CALLBACKS]; + + +#define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */ + + /* maximum controller queue depth */ +#define MAX_HBA_QUEUE_DEPTH 30000 +#define MAX_CHAIN_DEPTH 100000 +static int max_queue_depth = -1; +module_param(max_queue_depth, int, 0); +MODULE_PARM_DESC(max_queue_depth, " max controller queue depth "); + +static int max_sgl_entries = -1; +module_param(max_sgl_entries, int, 0); +MODULE_PARM_DESC(max_sgl_entries, " max sg entries "); + +static int msix_disable = -1; +module_param(msix_disable, int, 0); +MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)"); + + +static int mpt3sas_fwfault_debug; +MODULE_PARM_DESC(mpt3sas_fwfault_debug, + " enable detection of firmware fault and halt firmware - (default=0)"); + + +/** + * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug. + * + */ +static int +_scsih_set_fwfault_debug(const char *val, struct kernel_param *kp) +{ + int ret = param_set_int(val, kp); + struct MPT3SAS_ADAPTER *ioc; + + if (ret) + return ret; + + pr_info("setting fwfault_debug(%d)\n", mpt3sas_fwfault_debug); + list_for_each_entry(ioc, &mpt3sas_ioc_list, list) + ioc->fwfault_debug = mpt3sas_fwfault_debug; + return 0; +} +module_param_call(mpt3sas_fwfault_debug, _scsih_set_fwfault_debug, + param_get_int, &mpt3sas_fwfault_debug, 0644); + +/** + * mpt3sas_remove_dead_ioc_func - kthread context to remove dead ioc + * @arg: input argument, used to derive ioc + * + * Return 0 if controller is removed from pci subsystem. + * Return -1 for other case. + */ +static int mpt3sas_remove_dead_ioc_func(void *arg) +{ + struct MPT3SAS_ADAPTER *ioc = (struct MPT3SAS_ADAPTER *)arg; + struct pci_dev *pdev; + + if ((ioc == NULL)) + return -1; + + pdev = ioc->pdev; + if ((pdev == NULL)) + return -1; + pci_stop_and_remove_bus_device(pdev); + return 0; +} + +/** + * _base_fault_reset_work - workq handling ioc fault conditions + * @work: input argument, used to derive ioc + * Context: sleep. + * + * Return nothing. + */ +static void +_base_fault_reset_work(struct work_struct *work) +{ + struct MPT3SAS_ADAPTER *ioc = + container_of(work, struct MPT3SAS_ADAPTER, fault_reset_work.work); + unsigned long flags; + u32 doorbell; + int rc; + struct task_struct *p; + + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->shost_recovery) + goto rearm_timer; + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + doorbell = mpt3sas_base_get_iocstate(ioc, 0); + if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_MASK) { + pr_err(MPT3SAS_FMT "SAS host is non-operational !!!!\n", + ioc->name); + + /* + * Call _scsih_flush_pending_cmds callback so that we flush all + * pending commands back to OS. This call is required to aovid + * deadlock at block layer. Dead IOC will fail to do diag reset, + * and this call is safe since dead ioc will never return any + * command back from HW. + */ + ioc->schedule_dead_ioc_flush_running_cmds(ioc); + /* + * Set remove_host flag early since kernel thread will + * take some time to execute. + */ + ioc->remove_host = 1; + /*Remove the Dead Host */ + p = kthread_run(mpt3sas_remove_dead_ioc_func, ioc, + "mpt3sas_dead_ioc_%d", ioc->id); + if (IS_ERR(p)) + pr_err(MPT3SAS_FMT + "%s: Running mpt3sas_dead_ioc thread failed !!!!\n", + ioc->name, __func__); + else + pr_err(MPT3SAS_FMT + "%s: Running mpt3sas_dead_ioc thread success !!!!\n", + ioc->name, __func__); + return; /* don't rearm timer */ + } + + if ((doorbell & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) { + rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + pr_warn(MPT3SAS_FMT "%s: hard reset: %s\n", ioc->name, + __func__, (rc == 0) ? "success" : "failed"); + doorbell = mpt3sas_base_get_iocstate(ioc, 0); + if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) + mpt3sas_base_fault_info(ioc, doorbell & + MPI2_DOORBELL_DATA_MASK); + if (rc && (doorbell & MPI2_IOC_STATE_MASK) != + MPI2_IOC_STATE_OPERATIONAL) + return; /* don't rearm timer */ + } + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + rearm_timer: + if (ioc->fault_reset_work_q) + queue_delayed_work(ioc->fault_reset_work_q, + &ioc->fault_reset_work, + msecs_to_jiffies(FAULT_POLLING_INTERVAL)); + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); +} + +/** + * mpt3sas_base_start_watchdog - start the fault_reset_work_q + * @ioc: per adapter object + * Context: sleep. + * + * Return nothing. + */ +void +mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc) +{ + unsigned long flags; + + if (ioc->fault_reset_work_q) + return; + + /* initialize fault polling */ + + INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work); + snprintf(ioc->fault_reset_work_q_name, + sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id); + ioc->fault_reset_work_q = + create_singlethread_workqueue(ioc->fault_reset_work_q_name); + if (!ioc->fault_reset_work_q) { + pr_err(MPT3SAS_FMT "%s: failed (line=%d)\n", + ioc->name, __func__, __LINE__); + return; + } + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->fault_reset_work_q) + queue_delayed_work(ioc->fault_reset_work_q, + &ioc->fault_reset_work, + msecs_to_jiffies(FAULT_POLLING_INTERVAL)); + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); +} + +/** + * mpt3sas_base_stop_watchdog - stop the fault_reset_work_q + * @ioc: per adapter object + * Context: sleep. + * + * Return nothing. + */ +void +mpt3sas_base_stop_watchdog(struct MPT3SAS_ADAPTER *ioc) +{ + unsigned long flags; + struct workqueue_struct *wq; + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + wq = ioc->fault_reset_work_q; + ioc->fault_reset_work_q = NULL; + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + if (wq) { + if (!cancel_delayed_work(&ioc->fault_reset_work)) + flush_workqueue(wq); + destroy_workqueue(wq); + } +} + +/** + * mpt3sas_base_fault_info - verbose translation of firmware FAULT code + * @ioc: per adapter object + * @fault_code: fault code + * + * Return nothing. + */ +void +mpt3sas_base_fault_info(struct MPT3SAS_ADAPTER *ioc , u16 fault_code) +{ + pr_err(MPT3SAS_FMT "fault_state(0x%04x)!\n", + ioc->name, fault_code); +} + +/** + * mpt3sas_halt_firmware - halt's mpt controller firmware + * @ioc: per adapter object + * + * For debugging timeout related issues. Writing 0xCOFFEE00 + * to the doorbell register will halt controller firmware. With + * the purpose to stop both driver and firmware, the enduser can + * obtain a ring buffer from controller UART. + */ +void +mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc) +{ + u32 doorbell; + + if (!ioc->fwfault_debug) + return; + + dump_stack(); + + doorbell = readl(&ioc->chip->Doorbell); + if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) + mpt3sas_base_fault_info(ioc , doorbell); + else { + writel(0xC0FFEE00, &ioc->chip->Doorbell); + pr_err(MPT3SAS_FMT "Firmware is halted due to command timeout\n", + ioc->name); + } + + if (ioc->fwfault_debug == 2) + for (;;) + ; + else + panic("panic in %s\n", __func__); +} + +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING +/** + * _base_sas_ioc_info - verbose translation of the ioc status + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @request_hdr: request mf + * + * Return nothing. + */ +static void +_base_sas_ioc_info(struct MPT3SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply, + MPI2RequestHeader_t *request_hdr) +{ + u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & + MPI2_IOCSTATUS_MASK; + char *desc = NULL; + u16 frame_sz; + char *func_str = NULL; + + /* SCSI_IO, RAID_PASS are handled from _scsih_scsi_ioc_info */ + if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || + request_hdr->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH || + request_hdr->Function == MPI2_FUNCTION_EVENT_NOTIFICATION) + return; + + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + return; + + switch (ioc_status) { + +/**************************************************************************** +* Common IOCStatus values for all replies +****************************************************************************/ + + case MPI2_IOCSTATUS_INVALID_FUNCTION: + desc = "invalid function"; + break; + case MPI2_IOCSTATUS_BUSY: + desc = "busy"; + break; + case MPI2_IOCSTATUS_INVALID_SGL: + desc = "invalid sgl"; + break; + case MPI2_IOCSTATUS_INTERNAL_ERROR: + desc = "internal error"; + break; + case MPI2_IOCSTATUS_INVALID_VPID: + desc = "invalid vpid"; + break; + case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES: + desc = "insufficient resources"; + break; + case MPI2_IOCSTATUS_INVALID_FIELD: + desc = "invalid field"; + break; + case MPI2_IOCSTATUS_INVALID_STATE: + desc = "invalid state"; + break; + case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED: + desc = "op state not supported"; + break; + +/**************************************************************************** +* Config IOCStatus values +****************************************************************************/ + + case MPI2_IOCSTATUS_CONFIG_INVALID_ACTION: + desc = "config invalid action"; + break; + case MPI2_IOCSTATUS_CONFIG_INVALID_TYPE: + desc = "config invalid type"; + break; + case MPI2_IOCSTATUS_CONFIG_INVALID_PAGE: + desc = "config invalid page"; + break; + case MPI2_IOCSTATUS_CONFIG_INVALID_DATA: + desc = "config invalid data"; + break; + case MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS: + desc = "config no defaults"; + break; + case MPI2_IOCSTATUS_CONFIG_CANT_COMMIT: + desc = "config cant commit"; + break; + +/**************************************************************************** +* SCSI IO Reply +****************************************************************************/ + + case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR: + case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE: + case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE: + case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN: + case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN: + case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR: + case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR: + case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED: + case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: + case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED: + case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED: + case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED: + break; + +/**************************************************************************** +* For use by SCSI Initiator and SCSI Target end-to-end data protection +****************************************************************************/ + + case MPI2_IOCSTATUS_EEDP_GUARD_ERROR: + desc = "eedp guard error"; + break; + case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR: + desc = "eedp ref tag error"; + break; + case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR: + desc = "eedp app tag error"; + break; + +/**************************************************************************** +* SCSI Target values +****************************************************************************/ + + case MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX: + desc = "target invalid io index"; + break; + case MPI2_IOCSTATUS_TARGET_ABORTED: + desc = "target aborted"; + break; + case MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: + desc = "target no conn retryable"; + break; + case MPI2_IOCSTATUS_TARGET_NO_CONNECTION: + desc = "target no connection"; + break; + case MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: + desc = "target xfer count mismatch"; + break; + case MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: + desc = "target data offset error"; + break; + case MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: + desc = "target too much write data"; + break; + case MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT: + desc = "target iu too short"; + break; + case MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: + desc = "target ack nak timeout"; + break; + case MPI2_IOCSTATUS_TARGET_NAK_RECEIVED: + desc = "target nak received"; + break; + +/**************************************************************************** +* Serial Attached SCSI values +****************************************************************************/ + + case MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED: + desc = "smp request failed"; + break; + case MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN: + desc = "smp data overrun"; + break; + +/**************************************************************************** +* Diagnostic Buffer Post / Diagnostic Release values +****************************************************************************/ + + case MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED: + desc = "diagnostic released"; + break; + default: + break; + } + + if (!desc) + return; + + switch (request_hdr->Function) { + case MPI2_FUNCTION_CONFIG: + frame_sz = sizeof(Mpi2ConfigRequest_t) + ioc->sge_size; + func_str = "config_page"; + break; + case MPI2_FUNCTION_SCSI_TASK_MGMT: + frame_sz = sizeof(Mpi2SCSITaskManagementRequest_t); + func_str = "task_mgmt"; + break; + case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL: + frame_sz = sizeof(Mpi2SasIoUnitControlRequest_t); + func_str = "sas_iounit_ctl"; + break; + case MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR: + frame_sz = sizeof(Mpi2SepRequest_t); + func_str = "enclosure"; + break; + case MPI2_FUNCTION_IOC_INIT: + frame_sz = sizeof(Mpi2IOCInitRequest_t); + func_str = "ioc_init"; + break; + case MPI2_FUNCTION_PORT_ENABLE: + frame_sz = sizeof(Mpi2PortEnableRequest_t); + func_str = "port_enable"; + break; + case MPI2_FUNCTION_SMP_PASSTHROUGH: + frame_sz = sizeof(Mpi2SmpPassthroughRequest_t) + ioc->sge_size; + func_str = "smp_passthru"; + break; + default: + frame_sz = 32; + func_str = "unknown"; + break; + } + + pr_warn(MPT3SAS_FMT "ioc_status: %s(0x%04x), request(0x%p),(%s)\n", + ioc->name, desc, ioc_status, request_hdr, func_str); + + _debug_dump_mf(request_hdr, frame_sz/4); +} + +/** + * _base_display_event_data - verbose translation of firmware asyn events + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * + * Return nothing. + */ +static void +_base_display_event_data(struct MPT3SAS_ADAPTER *ioc, + Mpi2EventNotificationReply_t *mpi_reply) +{ + char *desc = NULL; + u16 event; + + if (!(ioc->logging_level & MPT_DEBUG_EVENTS)) + return; + + event = le16_to_cpu(mpi_reply->Event); + + switch (event) { + case MPI2_EVENT_LOG_DATA: + desc = "Log Data"; + break; + case MPI2_EVENT_STATE_CHANGE: + desc = "Status Change"; + break; + case MPI2_EVENT_HARD_RESET_RECEIVED: + desc = "Hard Reset Received"; + break; + case MPI2_EVENT_EVENT_CHANGE: + desc = "Event Change"; + break; + case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: + desc = "Device Status Change"; + break; + case MPI2_EVENT_IR_OPERATION_STATUS: + desc = "IR Operation Status"; + break; + case MPI2_EVENT_SAS_DISCOVERY: + { + Mpi2EventDataSasDiscovery_t *event_data = + (Mpi2EventDataSasDiscovery_t *)mpi_reply->EventData; + pr_info(MPT3SAS_FMT "Discovery: (%s)", ioc->name, + (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ? + "start" : "stop"); + if (event_data->DiscoveryStatus) + pr_info("discovery_status(0x%08x)", + le32_to_cpu(event_data->DiscoveryStatus)); + pr_info("\n"); + return; + } + case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: + desc = "SAS Broadcast Primitive"; + break; + case MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE: + desc = "SAS Init Device Status Change"; + break; + case MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW: + desc = "SAS Init Table Overflow"; + break; + case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: + desc = "SAS Topology Change List"; + break; + case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: + desc = "SAS Enclosure Device Status Change"; + break; + case MPI2_EVENT_IR_VOLUME: + desc = "IR Volume"; + break; + case MPI2_EVENT_IR_PHYSICAL_DISK: + desc = "IR Physical Disk"; + break; + case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: + desc = "IR Configuration Change List"; + break; + case MPI2_EVENT_LOG_ENTRY_ADDED: + desc = "Log Entry Added"; + break; + } + + if (!desc) + return; + + pr_info(MPT3SAS_FMT "%s\n", ioc->name, desc); +} +#endif + +/** + * _base_sas_log_info - verbose translation of firmware log info + * @ioc: per adapter object + * @log_info: log info + * + * Return nothing. + */ +static void +_base_sas_log_info(struct MPT3SAS_ADAPTER *ioc , u32 log_info) +{ + union loginfo_type { + u32 loginfo; + struct { + u32 subcode:16; + u32 code:8; + u32 originator:4; + u32 bus_type:4; + } dw; + }; + union loginfo_type sas_loginfo; + char *originator_str = NULL; + + sas_loginfo.loginfo = log_info; + if (sas_loginfo.dw.bus_type != 3 /*SAS*/) + return; + + /* each nexus loss loginfo */ + if (log_info == 0x31170000) + return; + + /* eat the loginfos associated with task aborts */ + if (ioc->ignore_loginfos && (log_info == 0x30050000 || log_info == + 0x31140000 || log_info == 0x31130000)) + return; + + switch (sas_loginfo.dw.originator) { + case 0: + originator_str = "IOP"; + break; + case 1: + originator_str = "PL"; + break; + case 2: + originator_str = "IR"; + break; + } + + pr_warn(MPT3SAS_FMT + "log_info(0x%08x): originator(%s), code(0x%02x), sub_code(0x%04x)\n", + ioc->name, log_info, + originator_str, sas_loginfo.dw.code, + sas_loginfo.dw.subcode); +} + +/** + * _base_display_reply_info - + * @ioc: per adapter object + * @smid: system request message index + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * + * Return nothing. + */ +static void +_base_display_reply_info(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, + u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + u16 ioc_status; + u32 loginfo = 0; + + mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); + if (unlikely(!mpi_reply)) { + pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + ioc_status = le16_to_cpu(mpi_reply->IOCStatus); +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING + if ((ioc_status & MPI2_IOCSTATUS_MASK) && + (ioc->logging_level & MPT_DEBUG_REPLY)) { + _base_sas_ioc_info(ioc , mpi_reply, + mpt3sas_base_get_msg_frame(ioc, smid)); + } +#endif + if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) { + loginfo = le32_to_cpu(mpi_reply->IOCLogInfo); + _base_sas_log_info(ioc, loginfo); + } + + if (ioc_status || loginfo) { + ioc_status &= MPI2_IOCSTATUS_MASK; + mpt3sas_trigger_mpi(ioc, ioc_status, loginfo); + } +} + +/** + * mpt3sas_base_done - base internal command completion routine + * @ioc: per adapter object + * @smid: system request message index + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. + */ +u8 +mpt3sas_base_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, + u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + + mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); + if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK) + return 1; + + if (ioc->base_cmds.status == MPT3_CMD_NOT_USED) + return 1; + + ioc->base_cmds.status |= MPT3_CMD_COMPLETE; + if (mpi_reply) { + ioc->base_cmds.status |= MPT3_CMD_REPLY_VALID; + memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); + } + ioc->base_cmds.status &= ~MPT3_CMD_PENDING; + + complete(&ioc->base_cmds.done); + return 1; +} + +/** + * _base_async_event - main callback handler for firmware asyn events + * @ioc: per adapter object + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. + */ +static u8 +_base_async_event(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, u32 reply) +{ + Mpi2EventNotificationReply_t *mpi_reply; + Mpi2EventAckRequest_t *ack_request; + u16 smid; + + mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); + if (!mpi_reply) + return 1; + if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION) + return 1; +#ifdef CONFIG_SCSI_MPT3SAS_LOGGING + _base_display_event_data(ioc, mpi_reply); +#endif + if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED)) + goto out; + smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + goto out; + } + + ack_request = mpt3sas_base_get_msg_frame(ioc, smid); + memset(ack_request, 0, sizeof(Mpi2EventAckRequest_t)); + ack_request->Function = MPI2_FUNCTION_EVENT_ACK; + ack_request->Event = mpi_reply->Event; + ack_request->EventContext = mpi_reply->EventContext; + ack_request->VF_ID = 0; /* TODO */ + ack_request->VP_ID = 0; + mpt3sas_base_put_smid_default(ioc, smid); + + out: + + /* scsih callback handler */ + mpt3sas_scsih_event_callback(ioc, msix_index, reply); + + /* ctl callback handler */ + mpt3sas_ctl_event_callback(ioc, msix_index, reply); + + return 1; +} + +/** + * _base_get_cb_idx - obtain the callback index + * @ioc: per adapter object + * @smid: system request message index + * + * Return callback index. + */ +static u8 +_base_get_cb_idx(struct MPT3SAS_ADAPTER *ioc, u16 smid) +{ + int i; + u8 cb_idx; + + if (smid < ioc->hi_priority_smid) { + i = smid - 1; + cb_idx = ioc->scsi_lookup[i].cb_idx; + } else if (smid < ioc->internal_smid) { + i = smid - ioc->hi_priority_smid; + cb_idx = ioc->hpr_lookup[i].cb_idx; + } else if (smid <= ioc->hba_queue_depth) { + i = smid - ioc->internal_smid; + cb_idx = ioc->internal_lookup[i].cb_idx; + } else + cb_idx = 0xFF; + return cb_idx; +} + +/** + * _base_mask_interrupts - disable interrupts + * @ioc: per adapter object + * + * Disabling ResetIRQ, Reply and Doorbell Interrupts + * + * Return nothing. + */ +static void +_base_mask_interrupts(struct MPT3SAS_ADAPTER *ioc) +{ + u32 him_register; + + ioc->mask_interrupts = 1; + him_register = readl(&ioc->chip->HostInterruptMask); + him_register |= MPI2_HIM_DIM + MPI2_HIM_RIM + MPI2_HIM_RESET_IRQ_MASK; + writel(him_register, &ioc->chip->HostInterruptMask); + readl(&ioc->chip->HostInterruptMask); +} + +/** + * _base_unmask_interrupts - enable interrupts + * @ioc: per adapter object + * + * Enabling only Reply Interrupts + * + * Return nothing. + */ +static void +_base_unmask_interrupts(struct MPT3SAS_ADAPTER *ioc) +{ + u32 him_register; + + him_register = readl(&ioc->chip->HostInterruptMask); + him_register &= ~MPI2_HIM_RIM; + writel(him_register, &ioc->chip->HostInterruptMask); + ioc->mask_interrupts = 0; +} + +union reply_descriptor { + u64 word; + struct { + u32 low; + u32 high; + } u; +}; + +/** + * _base_interrupt - MPT adapter (IOC) specific interrupt handler. + * @irq: irq number (not used) + * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure + * @r: pt_regs pointer (not used) + * + * Return IRQ_HANDLE if processed, else IRQ_NONE. + */ +static irqreturn_t +_base_interrupt(int irq, void *bus_id) +{ + struct adapter_reply_queue *reply_q = bus_id; + union reply_descriptor rd; + u32 completed_cmds; + u8 request_desript_type; + u16 smid; + u8 cb_idx; + u32 reply; + u8 msix_index = reply_q->msix_index; + struct MPT3SAS_ADAPTER *ioc = reply_q->ioc; + Mpi2ReplyDescriptorsUnion_t *rpf; + u8 rc; + + if (ioc->mask_interrupts) + return IRQ_NONE; + + if (!atomic_add_unless(&reply_q->busy, 1, 1)) + return IRQ_NONE; + + rpf = &reply_q->reply_post_free[reply_q->reply_post_host_index]; + request_desript_type = rpf->Default.ReplyFlags + & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; + if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) { + atomic_dec(&reply_q->busy); + return IRQ_NONE; + } + + completed_cmds = 0; + cb_idx = 0xFF; + do { + rd.word = le64_to_cpu(rpf->Words); + if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX) + goto out; + reply = 0; + smid = le16_to_cpu(rpf->Default.DescriptorTypeDependent1); + if (request_desript_type == + MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS || + request_desript_type == + MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS) { + cb_idx = _base_get_cb_idx(ioc, smid); + if ((likely(cb_idx < MPT_MAX_CALLBACKS)) && + (likely(mpt_callbacks[cb_idx] != NULL))) { + rc = mpt_callbacks[cb_idx](ioc, smid, + msix_index, 0); + if (rc) + mpt3sas_base_free_smid(ioc, smid); + } + } else if (request_desript_type == + MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) { + reply = le32_to_cpu( + rpf->AddressReply.ReplyFrameAddress); + if (reply > ioc->reply_dma_max_address || + reply < ioc->reply_dma_min_address) + reply = 0; + if (smid) { + cb_idx = _base_get_cb_idx(ioc, smid); + if ((likely(cb_idx < MPT_MAX_CALLBACKS)) && + (likely(mpt_callbacks[cb_idx] != NULL))) { + rc = mpt_callbacks[cb_idx](ioc, smid, + msix_index, reply); + if (reply) + _base_display_reply_info(ioc, + smid, msix_index, reply); + if (rc) + mpt3sas_base_free_smid(ioc, + smid); + } + } else { + _base_async_event(ioc, msix_index, reply); + } + + /* reply free queue handling */ + if (reply) { + ioc->reply_free_host_index = + (ioc->reply_free_host_index == + (ioc->reply_free_queue_depth - 1)) ? + 0 : ioc->reply_free_host_index + 1; + ioc->reply_free[ioc->reply_free_host_index] = + cpu_to_le32(reply); + wmb(); + writel(ioc->reply_free_host_index, + &ioc->chip->ReplyFreeHostIndex); + } + } + + rpf->Words = cpu_to_le64(ULLONG_MAX); + reply_q->reply_post_host_index = + (reply_q->reply_post_host_index == + (ioc->reply_post_queue_depth - 1)) ? 0 : + reply_q->reply_post_host_index + 1; + request_desript_type = + reply_q->reply_post_free[reply_q->reply_post_host_index]. + Default.ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; + completed_cmds++; + if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) + goto out; + if (!reply_q->reply_post_host_index) + rpf = reply_q->reply_post_free; + else + rpf++; + } while (1); + + out: + + if (!completed_cmds) { + atomic_dec(&reply_q->busy); + return IRQ_NONE; + } + + wmb(); + writel(reply_q->reply_post_host_index | (msix_index << + MPI2_RPHI_MSIX_INDEX_SHIFT), &ioc->chip->ReplyPostHostIndex); + atomic_dec(&reply_q->busy); + return IRQ_HANDLED; +} + +/** + * _base_is_controller_msix_enabled - is controller support muli-reply queues + * @ioc: per adapter object + * + */ +static inline int +_base_is_controller_msix_enabled(struct MPT3SAS_ADAPTER *ioc) +{ + return (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable; +} + +/** + * mpt3sas_base_flush_reply_queues - flushing the MSIX reply queues + * @ioc: per adapter object + * Context: ISR conext + * + * Called when a Task Management request has completed. We want + * to flush the other reply queues so all the outstanding IO has been + * completed back to OS before we process the TM completetion. + * + * Return nothing. + */ +void +mpt3sas_base_flush_reply_queues(struct MPT3SAS_ADAPTER *ioc) +{ + struct adapter_reply_queue *reply_q; + + /* If MSIX capability is turned off + * then multi-queues are not enabled + */ + if (!_base_is_controller_msix_enabled(ioc)) + return; + + list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { + if (ioc->shost_recovery) + return; + /* TMs are on msix_index == 0 */ + if (reply_q->msix_index == 0) + continue; + _base_interrupt(reply_q->vector, (void *)reply_q); + } +} + +/** + * mpt3sas_base_release_callback_handler - clear interrupt callback handler + * @cb_idx: callback index + * + * Return nothing. + */ +void +mpt3sas_base_release_callback_handler(u8 cb_idx) +{ + mpt_callbacks[cb_idx] = NULL; +} + +/** + * mpt3sas_base_register_callback_handler - obtain index for the interrupt callback handler + * @cb_func: callback function + * + * Returns cb_func. + */ +u8 +mpt3sas_base_register_callback_handler(MPT_CALLBACK cb_func) +{ + u8 cb_idx; + + for (cb_idx = MPT_MAX_CALLBACKS-1; cb_idx; cb_idx--) + if (mpt_callbacks[cb_idx] == NULL) + break; + + mpt_callbacks[cb_idx] = cb_func; + return cb_idx; +} + +/** + * mpt3sas_base_initialize_callback_handler - initialize the interrupt callback handler + * + * Return nothing. + */ +void +mpt3sas_base_initialize_callback_handler(void) +{ + u8 cb_idx; + + for (cb_idx = 0; cb_idx < MPT_MAX_CALLBACKS; cb_idx++) + mpt3sas_base_release_callback_handler(cb_idx); +} + + +/** + * _base_build_zero_len_sge - build zero length sg entry + * @ioc: per adapter object + * @paddr: virtual address for SGE + * + * Create a zero length scatter gather entry to insure the IOCs hardware has + * something to use if the target device goes brain dead and tries + * to send data even when none is asked for. + * + * Return nothing. + */ +static void +_base_build_zero_len_sge(struct MPT3SAS_ADAPTER *ioc, void *paddr) +{ + u32 flags_length = (u32)((MPI2_SGE_FLAGS_LAST_ELEMENT | + MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST | + MPI2_SGE_FLAGS_SIMPLE_ELEMENT) << + MPI2_SGE_FLAGS_SHIFT); + ioc->base_add_sg_single(paddr, flags_length, -1); +} + +/** + * _base_add_sg_single_32 - Place a simple 32 bit SGE at address pAddr. + * @paddr: virtual address for SGE + * @flags_length: SGE flags and data transfer length + * @dma_addr: Physical address + * + * Return nothing. + */ +static void +_base_add_sg_single_32(void *paddr, u32 flags_length, dma_addr_t dma_addr) +{ + Mpi2SGESimple32_t *sgel = paddr; + + flags_length |= (MPI2_SGE_FLAGS_32_BIT_ADDRESSING | + MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT; + sgel->FlagsLength = cpu_to_le32(flags_length); + sgel->Address = cpu_to_le32(dma_addr); +} + + +/** + * _base_add_sg_single_64 - Place a simple 64 bit SGE at address pAddr. + * @paddr: virtual address for SGE + * @flags_length: SGE flags and data transfer length + * @dma_addr: Physical address + * + * Return nothing. + */ +static void +_base_add_sg_single_64(void *paddr, u32 flags_length, dma_addr_t dma_addr) +{ + Mpi2SGESimple64_t *sgel = paddr; + + flags_length |= (MPI2_SGE_FLAGS_64_BIT_ADDRESSING | + MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT; + sgel->FlagsLength = cpu_to_le32(flags_length); + sgel->Address = cpu_to_le64(dma_addr); +} + +/** + * _base_get_chain_buffer_tracker - obtain chain tracker + * @ioc: per adapter object + * @smid: smid associated to an IO request + * + * Returns chain tracker(from ioc->free_chain_list) + */ +static struct chain_tracker * +_base_get_chain_buffer_tracker(struct MPT3SAS_ADAPTER *ioc, u16 smid) +{ + struct chain_tracker *chain_req; + unsigned long flags; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + if (list_empty(&ioc->free_chain_list)) { + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + dfailprintk(ioc, pr_warn(MPT3SAS_FMT + "chain buffers not available\n", ioc->name)); + return NULL; + } + chain_req = list_entry(ioc->free_chain_list.next, + struct chain_tracker, tracker_list); + list_del_init(&chain_req->tracker_list); + list_add_tail(&chain_req->tracker_list, + &ioc->scsi_lookup[smid - 1].chain_list); + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return chain_req; +} + + +/** + * _base_build_sg - build generic sg + * @ioc: per adapter object + * @psge: virtual address for SGE + * @data_out_dma: physical address for WRITES + * @data_out_sz: data xfer size for WRITES + * @data_in_dma: physical address for READS + * @data_in_sz: data xfer size for READS + * + * Return nothing. + */ +static void +_base_build_sg(struct MPT3SAS_ADAPTER *ioc, void *psge, + dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma, + size_t data_in_sz) +{ + u32 sgl_flags; + + if (!data_out_sz && !data_in_sz) { + _base_build_zero_len_sge(ioc, psge); + return; + } + + if (data_out_sz && data_in_sz) { + /* WRITE sgel first */ + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + data_out_sz, data_out_dma); + + /* incr sgel */ + psge += ioc->sge_size; + + /* READ sgel last */ + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | + MPI2_SGE_FLAGS_END_OF_LIST); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + data_in_sz, data_in_dma); + } else if (data_out_sz) /* WRITE */ { + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | + MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + data_out_sz, data_out_dma); + } else if (data_in_sz) /* READ */ { + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | + MPI2_SGE_FLAGS_END_OF_LIST); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + data_in_sz, data_in_dma); + } +} + +/* IEEE format sgls */ + +/** + * _base_add_sg_single_ieee - add sg element for IEEE format + * @paddr: virtual address for SGE + * @flags: SGE flags + * @chain_offset: number of 128 byte elements from start of segment + * @length: data transfer length + * @dma_addr: Physical address + * + * Return nothing. + */ +static void +_base_add_sg_single_ieee(void *paddr, u8 flags, u8 chain_offset, u32 length, + dma_addr_t dma_addr) +{ + Mpi25IeeeSgeChain64_t *sgel = paddr; + + sgel->Flags = flags; + sgel->NextChainOffset = chain_offset; + sgel->Length = cpu_to_le32(length); + sgel->Address = cpu_to_le64(dma_addr); +} + +/** + * _base_build_zero_len_sge_ieee - build zero length sg entry for IEEE format + * @ioc: per adapter object + * @paddr: virtual address for SGE + * + * Create a zero length scatter gather entry to insure the IOCs hardware has + * something to use if the target device goes brain dead and tries + * to send data even when none is asked for. + * + * Return nothing. + */ +static void +_base_build_zero_len_sge_ieee(struct MPT3SAS_ADAPTER *ioc, void *paddr) +{ + u8 sgl_flags = (MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR | + MPI25_IEEE_SGE_FLAGS_END_OF_LIST); + _base_add_sg_single_ieee(paddr, sgl_flags, 0, 0, -1); +} + +/** + * _base_build_sg_scmd_ieee - main sg creation routine for IEEE format + * @ioc: per adapter object + * @scmd: scsi command + * @smid: system request message index + * Context: none. + * + * The main routine that builds scatter gather table from a given + * scsi request sent via the .queuecommand main handler. + * + * Returns 0 success, anything else error + */ +static int +_base_build_sg_scmd_ieee(struct MPT3SAS_ADAPTER *ioc, + struct scsi_cmnd *scmd, u16 smid) +{ + Mpi2SCSIIORequest_t *mpi_request; + dma_addr_t chain_dma; + struct scatterlist *sg_scmd; + void *sg_local, *chain; + u32 chain_offset; + u32 chain_length; + u32 chain_flags; + int sges_left; + u32 sges_in_segment; + u8 simple_sgl_flags; + u8 simple_sgl_flags_last; + u8 chain_sgl_flags; + struct chain_tracker *chain_req; + + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + + /* init scatter gather flags */ + simple_sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR; + simple_sgl_flags_last = simple_sgl_flags | + MPI25_IEEE_SGE_FLAGS_END_OF_LIST; + chain_sgl_flags = MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT | + MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR; + + sg_scmd = scsi_sglist(scmd); + sges_left = scsi_dma_map(scmd); + if (!sges_left) { + sdev_printk(KERN_ERR, scmd->device, + "pci_map_sg failed: request for %d bytes!\n", + scsi_bufflen(scmd)); + return -ENOMEM; + } + + sg_local = &mpi_request->SGL; + sges_in_segment = (ioc->request_sz - + offsetof(Mpi2SCSIIORequest_t, SGL))/ioc->sge_size_ieee; + if (sges_left <= sges_in_segment) + goto fill_in_last_segment; + + mpi_request->ChainOffset = (sges_in_segment - 1 /* chain element */) + + (offsetof(Mpi2SCSIIORequest_t, SGL)/ioc->sge_size_ieee); + + /* fill in main message segment when there is a chain following */ + while (sges_in_segment > 1) { + _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0, + sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); + sg_scmd = sg_next(sg_scmd); + sg_local += ioc->sge_size_ieee; + sges_left--; + sges_in_segment--; + } + + /* initializing the chain flags and pointers */ + chain_flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT << MPI2_SGE_FLAGS_SHIFT; + chain_req = _base_get_chain_buffer_tracker(ioc, smid); + if (!chain_req) + return -1; + chain = chain_req->chain_buffer; + chain_dma = chain_req->chain_buffer_dma; + do { + sges_in_segment = (sges_left <= + ioc->max_sges_in_chain_message) ? sges_left : + ioc->max_sges_in_chain_message; + chain_offset = (sges_left == sges_in_segment) ? + 0 : sges_in_segment; + chain_length = sges_in_segment * ioc->sge_size_ieee; + if (chain_offset) + chain_length += ioc->sge_size_ieee; + _base_add_sg_single_ieee(sg_local, chain_sgl_flags, + chain_offset, chain_length, chain_dma); + + sg_local = chain; + if (!chain_offset) + goto fill_in_last_segment; + + /* fill in chain segments */ + while (sges_in_segment) { + _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0, + sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); + sg_scmd = sg_next(sg_scmd); + sg_local += ioc->sge_size_ieee; + sges_left--; + sges_in_segment--; + } + + chain_req = _base_get_chain_buffer_tracker(ioc, smid); + if (!chain_req) + return -1; + chain = chain_req->chain_buffer; + chain_dma = chain_req->chain_buffer_dma; + } while (1); + + + fill_in_last_segment: + + /* fill the last segment */ + while (sges_left) { + if (sges_left == 1) + _base_add_sg_single_ieee(sg_local, + simple_sgl_flags_last, 0, sg_dma_len(sg_scmd), + sg_dma_address(sg_scmd)); + else + _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0, + sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); + sg_scmd = sg_next(sg_scmd); + sg_local += ioc->sge_size_ieee; + sges_left--; + } + + return 0; +} + +/** + * _base_build_sg_ieee - build generic sg for IEEE format + * @ioc: per adapter object + * @psge: virtual address for SGE + * @data_out_dma: physical address for WRITES + * @data_out_sz: data xfer size for WRITES + * @data_in_dma: physical address for READS + * @data_in_sz: data xfer size for READS + * + * Return nothing. + */ +static void +_base_build_sg_ieee(struct MPT3SAS_ADAPTER *ioc, void *psge, + dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma, + size_t data_in_sz) +{ + u8 sgl_flags; + + if (!data_out_sz && !data_in_sz) { + _base_build_zero_len_sge_ieee(ioc, psge); + return; + } + + if (data_out_sz && data_in_sz) { + /* WRITE sgel first */ + sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR; + _base_add_sg_single_ieee(psge, sgl_flags, 0, data_out_sz, + data_out_dma); + + /* incr sgel */ + psge += ioc->sge_size_ieee; + + /* READ sgel last */ + sgl_flags |= MPI25_IEEE_SGE_FLAGS_END_OF_LIST; + _base_add_sg_single_ieee(psge, sgl_flags, 0, data_in_sz, + data_in_dma); + } else if (data_out_sz) /* WRITE */ { + sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | + MPI25_IEEE_SGE_FLAGS_END_OF_LIST | + MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR; + _base_add_sg_single_ieee(psge, sgl_flags, 0, data_out_sz, + data_out_dma); + } else if (data_in_sz) /* READ */ { + sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | + MPI25_IEEE_SGE_FLAGS_END_OF_LIST | + MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR; + _base_add_sg_single_ieee(psge, sgl_flags, 0, data_in_sz, + data_in_dma); + } +} + +#define convert_to_kb(x) ((x) << (PAGE_SHIFT - 10)) + +/** + * _base_config_dma_addressing - set dma addressing + * @ioc: per adapter object + * @pdev: PCI device struct + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) +{ + struct sysinfo s; + char *desc = NULL; + + if (sizeof(dma_addr_t) > 4) { + const uint64_t required_mask = + dma_get_required_mask(&pdev->dev); + if ((required_mask > DMA_BIT_MASK(32)) && + !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) && + !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) { + ioc->base_add_sg_single = &_base_add_sg_single_64; + ioc->sge_size = sizeof(Mpi2SGESimple64_t); + desc = "64"; + goto out; + } + } + + if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) + && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) { + ioc->base_add_sg_single = &_base_add_sg_single_32; + ioc->sge_size = sizeof(Mpi2SGESimple32_t); + desc = "32"; + } else + return -ENODEV; + + out: + si_meminfo(&s); + pr_info(MPT3SAS_FMT + "%s BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (%ld kB)\n", + ioc->name, desc, convert_to_kb(s.totalram)); + + return 0; +} + +/** + * _base_check_enable_msix - checks MSIX capabable. + * @ioc: per adapter object + * + * Check to see if card is capable of MSIX, and set number + * of available msix vectors + */ +static int +_base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc) +{ + int base; + u16 message_control; + + base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX); + if (!base) { + dfailprintk(ioc, pr_info(MPT3SAS_FMT "msix not supported\n", + ioc->name)); + return -EINVAL; + } + + /* get msix vector count */ + + pci_read_config_word(ioc->pdev, base + 2, &message_control); + ioc->msix_vector_count = (message_control & 0x3FF) + 1; + if (ioc->msix_vector_count > 8) + ioc->msix_vector_count = 8; + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "msix is supported, vector_count(%d)\n", + ioc->name, ioc->msix_vector_count)); + return 0; +} + +/** + * _base_free_irq - free irq + * @ioc: per adapter object + * + * Freeing respective reply_queue from the list. + */ +static void +_base_free_irq(struct MPT3SAS_ADAPTER *ioc) +{ + struct adapter_reply_queue *reply_q, *next; + + if (list_empty(&ioc->reply_queue_list)) + return; + + list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) { + list_del(&reply_q->list); + synchronize_irq(reply_q->vector); + free_irq(reply_q->vector, reply_q); + kfree(reply_q); + } +} + +/** + * _base_request_irq - request irq + * @ioc: per adapter object + * @index: msix index into vector table + * @vector: irq vector + * + * Inserting respective reply_queue into the list. + */ +static int +_base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index, u32 vector) +{ + struct adapter_reply_queue *reply_q; + int r; + + reply_q = kzalloc(sizeof(struct adapter_reply_queue), GFP_KERNEL); + if (!reply_q) { + pr_err(MPT3SAS_FMT "unable to allocate memory %d!\n", + ioc->name, (int)sizeof(struct adapter_reply_queue)); + return -ENOMEM; + } + reply_q->ioc = ioc; + reply_q->msix_index = index; + reply_q->vector = vector; + atomic_set(&reply_q->busy, 0); + if (ioc->msix_enable) + snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d", + MPT3SAS_DRIVER_NAME, ioc->id, index); + else + snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d", + MPT3SAS_DRIVER_NAME, ioc->id); + r = request_irq(vector, _base_interrupt, IRQF_SHARED, reply_q->name, + reply_q); + if (r) { + pr_err(MPT3SAS_FMT "unable to allocate interrupt %d!\n", + reply_q->name, vector); + kfree(reply_q); + return -EBUSY; + } + + INIT_LIST_HEAD(&reply_q->list); + list_add_tail(&reply_q->list, &ioc->reply_queue_list); + return 0; +} + +/** + * _base_assign_reply_queues - assigning msix index for each cpu + * @ioc: per adapter object + * + * The enduser would need to set the affinity via /proc/irq/#/smp_affinity + * + * It would nice if we could call irq_set_affinity, however it is not + * an exported symbol + */ +static void +_base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc) +{ + struct adapter_reply_queue *reply_q; + int cpu_id; + int cpu_grouping, loop, grouping, grouping_mod; + int reply_queue; + + if (!_base_is_controller_msix_enabled(ioc)) + return; + + memset(ioc->cpu_msix_table, 0, ioc->cpu_msix_table_sz); + + /* NUMA Hardware bug workaround - drop to less reply queues */ + if (ioc->reply_queue_count > ioc->facts.MaxMSIxVectors) { + ioc->reply_queue_count = ioc->facts.MaxMSIxVectors; + reply_queue = 0; + list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { + reply_q->msix_index = reply_queue; + if (++reply_queue == ioc->reply_queue_count) + reply_queue = 0; + } + } + + /* when there are more cpus than available msix vectors, + * then group cpus togeather on same irq + */ + if (ioc->cpu_count > ioc->msix_vector_count) { + grouping = ioc->cpu_count / ioc->msix_vector_count; + grouping_mod = ioc->cpu_count % ioc->msix_vector_count; + if (grouping < 2 || (grouping == 2 && !grouping_mod)) + cpu_grouping = 2; + else if (grouping < 4 || (grouping == 4 && !grouping_mod)) + cpu_grouping = 4; + else if (grouping < 8 || (grouping == 8 && !grouping_mod)) + cpu_grouping = 8; + else + cpu_grouping = 16; + } else + cpu_grouping = 0; + + loop = 0; + reply_q = list_entry(ioc->reply_queue_list.next, + struct adapter_reply_queue, list); + for_each_online_cpu(cpu_id) { + if (!cpu_grouping) { + ioc->cpu_msix_table[cpu_id] = reply_q->msix_index; + reply_q = list_entry(reply_q->list.next, + struct adapter_reply_queue, list); + } else { + if (loop < cpu_grouping) { + ioc->cpu_msix_table[cpu_id] = + reply_q->msix_index; + loop++; + } else { + reply_q = list_entry(reply_q->list.next, + struct adapter_reply_queue, list); + ioc->cpu_msix_table[cpu_id] = + reply_q->msix_index; + loop = 1; + } + } + } +} + +/** + * _base_disable_msix - disables msix + * @ioc: per adapter object + * + */ +static void +_base_disable_msix(struct MPT3SAS_ADAPTER *ioc) +{ + if (!ioc->msix_enable) + return; + pci_disable_msix(ioc->pdev); + ioc->msix_enable = 0; +} + +/** + * _base_enable_msix - enables msix, failback to io_apic + * @ioc: per adapter object + * + */ +static int +_base_enable_msix(struct MPT3SAS_ADAPTER *ioc) +{ + struct msix_entry *entries, *a; + int r; + int i; + u8 try_msix = 0; + + INIT_LIST_HEAD(&ioc->reply_queue_list); + + if (msix_disable == -1 || msix_disable == 0) + try_msix = 1; + + if (!try_msix) + goto try_ioapic; + + if (_base_check_enable_msix(ioc) != 0) + goto try_ioapic; + + ioc->reply_queue_count = min_t(int, ioc->cpu_count, + ioc->msix_vector_count); + + entries = kcalloc(ioc->reply_queue_count, sizeof(struct msix_entry), + GFP_KERNEL); + if (!entries) { + dfailprintk(ioc, pr_info(MPT3SAS_FMT + "kcalloc failed @ at %s:%d/%s() !!!\n", + ioc->name, __FILE__, __LINE__, __func__)); + goto try_ioapic; + } + + for (i = 0, a = entries; i < ioc->reply_queue_count; i++, a++) + a->entry = i; + + r = pci_enable_msix(ioc->pdev, entries, ioc->reply_queue_count); + if (r) { + dfailprintk(ioc, pr_info(MPT3SAS_FMT + "pci_enable_msix failed (r=%d) !!!\n", + ioc->name, r)); + kfree(entries); + goto try_ioapic; + } + + ioc->msix_enable = 1; + for (i = 0, a = entries; i < ioc->reply_queue_count; i++, a++) { + r = _base_request_irq(ioc, i, a->vector); + if (r) { + _base_free_irq(ioc); + _base_disable_msix(ioc); + kfree(entries); + goto try_ioapic; + } + } + + kfree(entries); + return 0; + +/* failback to io_apic interrupt routing */ + try_ioapic: + + r = _base_request_irq(ioc, 0, ioc->pdev->irq); + + return r; +} + +/** + * mpt3sas_base_map_resources - map in controller resources (io/irq/memap) + * @ioc: per adapter object + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc) +{ + struct pci_dev *pdev = ioc->pdev; + u32 memap_sz; + u32 pio_sz; + int i, r = 0; + u64 pio_chip = 0; + u64 chip_phys = 0; + struct adapter_reply_queue *reply_q; + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", + ioc->name, __func__)); + + ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM); + if (pci_enable_device_mem(pdev)) { + pr_warn(MPT3SAS_FMT "pci_enable_device_mem: failed\n", + ioc->name); + return -ENODEV; + } + + + if (pci_request_selected_regions(pdev, ioc->bars, + MPT3SAS_DRIVER_NAME)) { + pr_warn(MPT3SAS_FMT "pci_request_selected_regions: failed\n", + ioc->name); + r = -ENODEV; + goto out_fail; + } + +/* AER (Advanced Error Reporting) hooks */ + pci_enable_pcie_error_reporting(pdev); + + pci_set_master(pdev); + + + if (_base_config_dma_addressing(ioc, pdev) != 0) { + pr_warn(MPT3SAS_FMT "no suitable DMA mask for %s\n", + ioc->name, pci_name(pdev)); + r = -ENODEV; + goto out_fail; + } + + for (i = 0, memap_sz = 0, pio_sz = 0 ; i < DEVICE_COUNT_RESOURCE; i++) { + if (pci_resource_flags(pdev, i) & IORESOURCE_IO) { + if (pio_sz) + continue; + pio_chip = (u64)pci_resource_start(pdev, i); + pio_sz = pci_resource_len(pdev, i); + } else if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) { + if (memap_sz) + continue; + ioc->chip_phys = pci_resource_start(pdev, i); + chip_phys = (u64)ioc->chip_phys; + memap_sz = pci_resource_len(pdev, i); + ioc->chip = ioremap(ioc->chip_phys, memap_sz); + if (ioc->chip == NULL) { + pr_err(MPT3SAS_FMT "unable to map adapter memory!\n", + ioc->name); + r = -EINVAL; + goto out_fail; + } + } + } + + _base_mask_interrupts(ioc); + r = _base_enable_msix(ioc); + if (r) + goto out_fail; + + list_for_each_entry(reply_q, &ioc->reply_queue_list, list) + pr_info(MPT3SAS_FMT "%s: IRQ %d\n", + reply_q->name, ((ioc->msix_enable) ? "PCI-MSI-X enabled" : + "IO-APIC enabled"), reply_q->vector); + + pr_info(MPT3SAS_FMT "iomem(0x%016llx), mapped(0x%p), size(%d)\n", + ioc->name, (unsigned long long)chip_phys, ioc->chip, memap_sz); + pr_info(MPT3SAS_FMT "ioport(0x%016llx), size(%d)\n", + ioc->name, (unsigned long long)pio_chip, pio_sz); + + /* Save PCI configuration state for recovery from PCI AER/EEH errors */ + pci_save_state(pdev); + return 0; + + out_fail: + if (ioc->chip_phys) + iounmap(ioc->chip); + ioc->chip_phys = 0; + pci_release_selected_regions(ioc->pdev, ioc->bars); + pci_disable_pcie_error_reporting(pdev); + pci_disable_device(pdev); + return r; +} + +/** + * mpt3sas_base_get_msg_frame - obtain request mf pointer + * @ioc: per adapter object + * @smid: system request message index(smid zero is invalid) + * + * Returns virt pointer to message frame. + */ +void * +mpt3sas_base_get_msg_frame(struct MPT3SAS_ADAPTER *ioc, u16 smid) +{ + return (void *)(ioc->request + (smid * ioc->request_sz)); +} + +/** + * mpt3sas_base_get_sense_buffer - obtain a sense buffer virt addr + * @ioc: per adapter object + * @smid: system request message index + * + * Returns virt pointer to sense buffer. + */ +void * +mpt3sas_base_get_sense_buffer(struct MPT3SAS_ADAPTER *ioc, u16 smid) +{ + return (void *)(ioc->sense + ((smid - 1) * SCSI_SENSE_BUFFERSIZE)); +} + +/** + * mpt3sas_base_get_sense_buffer_dma - obtain a sense buffer dma addr + * @ioc: per adapter object + * @smid: system request message index + * + * Returns phys pointer to the low 32bit address of the sense buffer. + */ +__le32 +mpt3sas_base_get_sense_buffer_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid) +{ + return cpu_to_le32(ioc->sense_dma + ((smid - 1) * + SCSI_SENSE_BUFFERSIZE)); +} + +/** + * mpt3sas_base_get_reply_virt_addr - obtain reply frames virt address + * @ioc: per adapter object + * @phys_addr: lower 32 physical addr of the reply + * + * Converts 32bit lower physical addr into a virt address. + */ +void * +mpt3sas_base_get_reply_virt_addr(struct MPT3SAS_ADAPTER *ioc, u32 phys_addr) +{ + if (!phys_addr) + return NULL; + return ioc->reply + (phys_addr - (u32)ioc->reply_dma); +} + +/** + * mpt3sas_base_get_smid - obtain a free smid from internal queue + * @ioc: per adapter object + * @cb_idx: callback index + * + * Returns smid (zero is invalid) + */ +u16 +mpt3sas_base_get_smid(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx) +{ + unsigned long flags; + struct request_tracker *request; + u16 smid; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + if (list_empty(&ioc->internal_free_list)) { + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + pr_err(MPT3SAS_FMT "%s: smid not available\n", + ioc->name, __func__); + return 0; + } + + request = list_entry(ioc->internal_free_list.next, + struct request_tracker, tracker_list); + request->cb_idx = cb_idx; + smid = request->smid; + list_del(&request->tracker_list); + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return smid; +} + +/** + * mpt3sas_base_get_smid_scsiio - obtain a free smid from scsiio queue + * @ioc: per adapter object + * @cb_idx: callback index + * @scmd: pointer to scsi command object + * + * Returns smid (zero is invalid) + */ +u16 +mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx, + struct scsi_cmnd *scmd) +{ + unsigned long flags; + struct scsiio_tracker *request; + u16 smid; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + if (list_empty(&ioc->free_list)) { + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + pr_err(MPT3SAS_FMT "%s: smid not available\n", + ioc->name, __func__); + return 0; + } + + request = list_entry(ioc->free_list.next, + struct scsiio_tracker, tracker_list); + request->scmd = scmd; + request->cb_idx = cb_idx; + smid = request->smid; + list_del(&request->tracker_list); + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return smid; +} + +/** + * mpt3sas_base_get_smid_hpr - obtain a free smid from hi-priority queue + * @ioc: per adapter object + * @cb_idx: callback index + * + * Returns smid (zero is invalid) + */ +u16 +mpt3sas_base_get_smid_hpr(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx) +{ + unsigned long flags; + struct request_tracker *request; + u16 smid; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + if (list_empty(&ioc->hpr_free_list)) { + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return 0; + } + + request = list_entry(ioc->hpr_free_list.next, + struct request_tracker, tracker_list); + request->cb_idx = cb_idx; + smid = request->smid; + list_del(&request->tracker_list); + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return smid; +} + +/** + * mpt3sas_base_free_smid - put smid back on free_list + * @ioc: per adapter object + * @smid: system request message index + * + * Return nothing. + */ +void +mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid) +{ + unsigned long flags; + int i; + struct chain_tracker *chain_req, *next; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + if (smid < ioc->hi_priority_smid) { + /* scsiio queue */ + i = smid - 1; + if (!list_empty(&ioc->scsi_lookup[i].chain_list)) { + list_for_each_entry_safe(chain_req, next, + &ioc->scsi_lookup[i].chain_list, tracker_list) { + list_del_init(&chain_req->tracker_list); + list_add(&chain_req->tracker_list, + &ioc->free_chain_list); + } + } + ioc->scsi_lookup[i].cb_idx = 0xFF; + ioc->scsi_lookup[i].scmd = NULL; + list_add(&ioc->scsi_lookup[i].tracker_list, &ioc->free_list); + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + + /* + * See _wait_for_commands_to_complete() call with regards + * to this code. + */ + if (ioc->shost_recovery && ioc->pending_io_count) { + if (ioc->pending_io_count == 1) + wake_up(&ioc->reset_wq); + ioc->pending_io_count--; + } + return; + } else if (smid < ioc->internal_smid) { + /* hi-priority */ + i = smid - ioc->hi_priority_smid; + ioc->hpr_lookup[i].cb_idx = 0xFF; + list_add(&ioc->hpr_lookup[i].tracker_list, &ioc->hpr_free_list); + } else if (smid <= ioc->hba_queue_depth) { + /* internal queue */ + i = smid - ioc->internal_smid; + ioc->internal_lookup[i].cb_idx = 0xFF; + list_add(&ioc->internal_lookup[i].tracker_list, + &ioc->internal_free_list); + } + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); +} + +/** + * _base_writeq - 64 bit write to MMIO + * @ioc: per adapter object + * @b: data payload + * @addr: address in MMIO space + * @writeq_lock: spin lock + * + * Glue for handling an atomic 64 bit word to MMIO. This special handling takes + * care of 32 bit environment where its not quarenteed to send the entire word + * in one transfer. + */ +#if defined(writeq) && defined(CONFIG_64BIT) +static inline void +_base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock) +{ + writeq(cpu_to_le64(b), addr); +} +#else +static inline void +_base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock) +{ + unsigned long flags; + __u64 data_out = cpu_to_le64(b); + + spin_lock_irqsave(writeq_lock, flags); + writel((u32)(data_out), addr); + writel((u32)(data_out >> 32), (addr + 4)); + spin_unlock_irqrestore(writeq_lock, flags); +} +#endif + +static inline u8 +_base_get_msix_index(struct MPT3SAS_ADAPTER *ioc) +{ + return ioc->cpu_msix_table[raw_smp_processor_id()]; +} + +/** + * mpt3sas_base_put_smid_scsi_io - send SCSI_IO request to firmware + * @ioc: per adapter object + * @smid: system request message index + * @handle: device handle + * + * Return nothing. + */ +void +mpt3sas_base_put_smid_scsi_io(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 handle) +{ + Mpi2RequestDescriptorUnion_t descriptor; + u64 *request = (u64 *)&descriptor; + + + descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO; + descriptor.SCSIIO.MSIxIndex = _base_get_msix_index(ioc); + descriptor.SCSIIO.SMID = cpu_to_le16(smid); + descriptor.SCSIIO.DevHandle = cpu_to_le16(handle); + descriptor.SCSIIO.LMID = 0; + _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, + &ioc->scsi_lookup_lock); +} + +/** + * mpt3sas_base_put_smid_fast_path - send fast path request to firmware + * @ioc: per adapter object + * @smid: system request message index + * @handle: device handle + * + * Return nothing. + */ +void +mpt3sas_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid, + u16 handle) +{ + Mpi2RequestDescriptorUnion_t descriptor; + u64 *request = (u64 *)&descriptor; + + descriptor.SCSIIO.RequestFlags = + MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO; + descriptor.SCSIIO.MSIxIndex = _base_get_msix_index(ioc); + descriptor.SCSIIO.SMID = cpu_to_le16(smid); + descriptor.SCSIIO.DevHandle = cpu_to_le16(handle); + descriptor.SCSIIO.LMID = 0; + _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, + &ioc->scsi_lookup_lock); +} + +/** + * mpt3sas_base_put_smid_hi_priority - send Task Managment request to firmware + * @ioc: per adapter object + * @smid: system request message index + * + * Return nothing. + */ +void +mpt3sas_base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid) +{ + Mpi2RequestDescriptorUnion_t descriptor; + u64 *request = (u64 *)&descriptor; + + descriptor.HighPriority.RequestFlags = + MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY; + descriptor.HighPriority.MSIxIndex = 0; + descriptor.HighPriority.SMID = cpu_to_le16(smid); + descriptor.HighPriority.LMID = 0; + descriptor.HighPriority.Reserved1 = 0; + _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, + &ioc->scsi_lookup_lock); +} + +/** + * mpt3sas_base_put_smid_default - Default, primarily used for config pages + * @ioc: per adapter object + * @smid: system request message index + * + * Return nothing. + */ +void +mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid) +{ + Mpi2RequestDescriptorUnion_t descriptor; + u64 *request = (u64 *)&descriptor; + + descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; + descriptor.Default.MSIxIndex = _base_get_msix_index(ioc); + descriptor.Default.SMID = cpu_to_le16(smid); + descriptor.Default.LMID = 0; + descriptor.Default.DescriptorTypeDependent = 0; + _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, + &ioc->scsi_lookup_lock); +} + + + +/** + * _base_display_ioc_capabilities - Disply IOC's capabilities. + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_base_display_ioc_capabilities(struct MPT3SAS_ADAPTER *ioc) +{ + int i = 0; + char desc[16]; + u32 iounit_pg1_flags; + u32 bios_version; + + bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion); + strncpy(desc, ioc->manu_pg0.ChipName, 16); + pr_info(MPT3SAS_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), "\ + "ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n", + ioc->name, desc, + (ioc->facts.FWVersion.Word & 0xFF000000) >> 24, + (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16, + (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8, + ioc->facts.FWVersion.Word & 0x000000FF, + ioc->pdev->revision, + (bios_version & 0xFF000000) >> 24, + (bios_version & 0x00FF0000) >> 16, + (bios_version & 0x0000FF00) >> 8, + bios_version & 0x000000FF); + + pr_info(MPT3SAS_FMT "Protocol=(", ioc->name); + + if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR) { + pr_info("Initiator"); + i++; + } + + if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET) { + pr_info("%sTarget", i ? "," : ""); + i++; + } + + i = 0; + pr_info("), "); + pr_info("Capabilities=("); + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) { + pr_info("Raid"); + i++; + } + + if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) { + pr_info("%sTLR", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_MULTICAST) { + pr_info("%sMulticast", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET) { + pr_info("%sBIDI Target", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) { + pr_info("%sEEDP", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) { + pr_info("%sSnapshot Buffer", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) { + pr_info("%sDiag Trace Buffer", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER) { + pr_info("%sDiag Extended Buffer", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING) { + pr_info("%sTask Set Full", i ? "," : ""); + i++; + } + + iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags); + if (!(iounit_pg1_flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE)) { + pr_info("%sNCQ", i ? "," : ""); + i++; + } + + pr_info(")\n"); +} + +/** + * mpt3sas_base_update_missing_delay - change the missing delay timers + * @ioc: per adapter object + * @device_missing_delay: amount of time till device is reported missing + * @io_missing_delay: interval IO is returned when there is a missing device + * + * Return nothing. + * + * Passed on the command line, this function will modify the device missing + * delay, as well as the io missing delay. This should be called at driver + * load time. + */ +void +mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc, + u16 device_missing_delay, u8 io_missing_delay) +{ + u16 dmd, dmd_new, dmd_orignal; + u8 io_missing_delay_original; + u16 sz; + Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; + Mpi2ConfigReply_t mpi_reply; + u8 num_phys = 0; + u16 ioc_status; + + mpt3sas_config_get_number_hba_phys(ioc, &num_phys); + if (!num_phys) + return; + + sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (num_phys * + sizeof(Mpi2SasIOUnit1PhyData_t)); + sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg1) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, + sas_iounit_pg1, sz))) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + + /* device missing delay */ + dmd = sas_iounit_pg1->ReportDeviceMissingDelay; + if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16) + dmd = (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16; + else + dmd = dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK; + dmd_orignal = dmd; + if (device_missing_delay > 0x7F) { + dmd = (device_missing_delay > 0x7F0) ? 0x7F0 : + device_missing_delay; + dmd = dmd / 16; + dmd |= MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16; + } else + dmd = device_missing_delay; + sas_iounit_pg1->ReportDeviceMissingDelay = dmd; + + /* io missing delay */ + io_missing_delay_original = sas_iounit_pg1->IODeviceMissingDelay; + sas_iounit_pg1->IODeviceMissingDelay = io_missing_delay; + + if (!mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, + sz)) { + if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16) + dmd_new = (dmd & + MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16; + else + dmd_new = + dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK; + pr_info(MPT3SAS_FMT "device_missing_delay: old(%d), new(%d)\n", + ioc->name, dmd_orignal, dmd_new); + pr_info(MPT3SAS_FMT "ioc_missing_delay: old(%d), new(%d)\n", + ioc->name, io_missing_delay_original, + io_missing_delay); + ioc->device_missing_delay = dmd_new; + ioc->io_missing_delay = io_missing_delay; + } + +out: + kfree(sas_iounit_pg1); +} +/** + * _base_static_config_pages - static start of day config pages + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) +{ + Mpi2ConfigReply_t mpi_reply; + u32 iounit_pg1_flags; + + mpt3sas_config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0); + if (ioc->ir_firmware) + mpt3sas_config_get_manufacturing_pg10(ioc, &mpi_reply, + &ioc->manu_pg10); + + /* + * Ensure correct T10 PI operation if vendor left EEDPTagMode + * flag unset in NVDATA. + */ + mpt3sas_config_get_manufacturing_pg11(ioc, &mpi_reply, &ioc->manu_pg11); + if (ioc->manu_pg11.EEDPTagMode == 0) { + pr_err("%s: overriding NVDATA EEDPTagMode setting\n", + ioc->name); + ioc->manu_pg11.EEDPTagMode &= ~0x3; + ioc->manu_pg11.EEDPTagMode |= 0x1; + mpt3sas_config_set_manufacturing_pg11(ioc, &mpi_reply, + &ioc->manu_pg11); + } + + mpt3sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2); + mpt3sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3); + mpt3sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8); + mpt3sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0); + mpt3sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1); + _base_display_ioc_capabilities(ioc); + + /* + * Enable task_set_full handling in iounit_pg1 when the + * facts capabilities indicate that its supported. + */ + iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags); + if ((ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING)) + iounit_pg1_flags &= + ~MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING; + else + iounit_pg1_flags |= + MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING; + ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags); + mpt3sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1); +} + +/** + * _base_release_memory_pools - release memory + * @ioc: per adapter object + * + * Free memory allocated from _base_allocate_memory_pools. + * + * Return nothing. + */ +static void +_base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc) +{ + int i; + + dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + if (ioc->request) { + pci_free_consistent(ioc->pdev, ioc->request_dma_sz, + ioc->request, ioc->request_dma); + dexitprintk(ioc, pr_info(MPT3SAS_FMT + "request_pool(0x%p): free\n", + ioc->name, ioc->request)); + ioc->request = NULL; + } + + if (ioc->sense) { + pci_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma); + if (ioc->sense_dma_pool) + pci_pool_destroy(ioc->sense_dma_pool); + dexitprintk(ioc, pr_info(MPT3SAS_FMT + "sense_pool(0x%p): free\n", + ioc->name, ioc->sense)); + ioc->sense = NULL; + } + + if (ioc->reply) { + pci_pool_free(ioc->reply_dma_pool, ioc->reply, ioc->reply_dma); + if (ioc->reply_dma_pool) + pci_pool_destroy(ioc->reply_dma_pool); + dexitprintk(ioc, pr_info(MPT3SAS_FMT + "reply_pool(0x%p): free\n", + ioc->name, ioc->reply)); + ioc->reply = NULL; + } + + if (ioc->reply_free) { + pci_pool_free(ioc->reply_free_dma_pool, ioc->reply_free, + ioc->reply_free_dma); + if (ioc->reply_free_dma_pool) + pci_pool_destroy(ioc->reply_free_dma_pool); + dexitprintk(ioc, pr_info(MPT3SAS_FMT + "reply_free_pool(0x%p): free\n", + ioc->name, ioc->reply_free)); + ioc->reply_free = NULL; + } + + if (ioc->reply_post_free) { + pci_pool_free(ioc->reply_post_free_dma_pool, + ioc->reply_post_free, ioc->reply_post_free_dma); + if (ioc->reply_post_free_dma_pool) + pci_pool_destroy(ioc->reply_post_free_dma_pool); + dexitprintk(ioc, pr_info(MPT3SAS_FMT + "reply_post_free_pool(0x%p): free\n", ioc->name, + ioc->reply_post_free)); + ioc->reply_post_free = NULL; + } + + if (ioc->config_page) { + dexitprintk(ioc, pr_info(MPT3SAS_FMT + "config_page(0x%p): free\n", ioc->name, + ioc->config_page)); + pci_free_consistent(ioc->pdev, ioc->config_page_sz, + ioc->config_page, ioc->config_page_dma); + } + + if (ioc->scsi_lookup) { + free_pages((ulong)ioc->scsi_lookup, ioc->scsi_lookup_pages); + ioc->scsi_lookup = NULL; + } + kfree(ioc->hpr_lookup); + kfree(ioc->internal_lookup); + if (ioc->chain_lookup) { + for (i = 0; i < ioc->chain_depth; i++) { + if (ioc->chain_lookup[i].chain_buffer) + pci_pool_free(ioc->chain_dma_pool, + ioc->chain_lookup[i].chain_buffer, + ioc->chain_lookup[i].chain_buffer_dma); + } + if (ioc->chain_dma_pool) + pci_pool_destroy(ioc->chain_dma_pool); + free_pages((ulong)ioc->chain_lookup, ioc->chain_pages); + ioc->chain_lookup = NULL; + } +} + +/** + * _base_allocate_memory_pools - allocate start of day memory pools + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 success, anything else error + */ +static int +_base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) +{ + struct mpt3sas_facts *facts; + u16 max_sge_elements; + u16 chains_needed_per_io; + u32 sz, total_sz, reply_post_free_sz; + u32 retry_sz; + u16 max_request_credit; + unsigned short sg_tablesize; + u16 sge_size; + int i; + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + + retry_sz = 0; + facts = &ioc->facts; + + /* command line tunables for max sgl entries */ + if (max_sgl_entries != -1) + sg_tablesize = max_sgl_entries; + else + sg_tablesize = MPT3SAS_SG_DEPTH; + + if (sg_tablesize < MPT3SAS_MIN_PHYS_SEGMENTS) + sg_tablesize = MPT3SAS_MIN_PHYS_SEGMENTS; + else if (sg_tablesize > MPT3SAS_MAX_PHYS_SEGMENTS) + sg_tablesize = MPT3SAS_MAX_PHYS_SEGMENTS; + ioc->shost->sg_tablesize = sg_tablesize; + + ioc->hi_priority_depth = facts->HighPriorityCredit; + ioc->internal_depth = ioc->hi_priority_depth + (5); + /* command line tunables for max controller queue depth */ + if (max_queue_depth != -1 && max_queue_depth != 0) { + max_request_credit = min_t(u16, max_queue_depth + + ioc->hi_priority_depth + ioc->internal_depth, + facts->RequestCredit); + if (max_request_credit > MAX_HBA_QUEUE_DEPTH) + max_request_credit = MAX_HBA_QUEUE_DEPTH; + } else + max_request_credit = min_t(u16, facts->RequestCredit, + MAX_HBA_QUEUE_DEPTH); + + ioc->hba_queue_depth = max_request_credit; + + /* request frame size */ + ioc->request_sz = facts->IOCRequestFrameSize * 4; + + /* reply frame size */ + ioc->reply_sz = facts->ReplyFrameSize * 4; + + /* calculate the max scatter element size */ + sge_size = max_t(u16, ioc->sge_size, ioc->sge_size_ieee); + + retry_allocation: + total_sz = 0; + /* calculate number of sg elements left over in the 1st frame */ + max_sge_elements = ioc->request_sz - ((sizeof(Mpi2SCSIIORequest_t) - + sizeof(Mpi2SGEIOUnion_t)) + sge_size); + ioc->max_sges_in_main_message = max_sge_elements/sge_size; + + /* now do the same for a chain buffer */ + max_sge_elements = ioc->request_sz - sge_size; + ioc->max_sges_in_chain_message = max_sge_elements/sge_size; + + /* + * MPT3SAS_SG_DEPTH = CONFIG_FUSION_MAX_SGE + */ + chains_needed_per_io = ((ioc->shost->sg_tablesize - + ioc->max_sges_in_main_message)/ioc->max_sges_in_chain_message) + + 1; + if (chains_needed_per_io > facts->MaxChainDepth) { + chains_needed_per_io = facts->MaxChainDepth; + ioc->shost->sg_tablesize = min_t(u16, + ioc->max_sges_in_main_message + (ioc->max_sges_in_chain_message + * chains_needed_per_io), ioc->shost->sg_tablesize); + } + ioc->chains_needed_per_io = chains_needed_per_io; + + /* reply free queue sizing - taking into account for 64 FW events */ + ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64; + + /* calculate reply descriptor post queue depth */ + ioc->reply_post_queue_depth = ioc->hba_queue_depth + + ioc->reply_free_queue_depth + 1 ; + /* align the reply post queue on the next 16 count boundary */ + if (ioc->reply_post_queue_depth % 16) + ioc->reply_post_queue_depth += 16 - + (ioc->reply_post_queue_depth % 16); + + + if (ioc->reply_post_queue_depth > + facts->MaxReplyDescriptorPostQueueDepth) { + ioc->reply_post_queue_depth = + facts->MaxReplyDescriptorPostQueueDepth - + (facts->MaxReplyDescriptorPostQueueDepth % 16); + ioc->hba_queue_depth = + ((ioc->reply_post_queue_depth - 64) / 2) - 1; + ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64; + } + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "scatter gather: " \ + "sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), " + "chains_per_io(%d)\n", ioc->name, ioc->max_sges_in_main_message, + ioc->max_sges_in_chain_message, ioc->shost->sg_tablesize, + ioc->chains_needed_per_io)); + + ioc->scsiio_depth = ioc->hba_queue_depth - + ioc->hi_priority_depth - ioc->internal_depth; + + /* set the scsi host can_queue depth + * with some internal commands that could be outstanding + */ + ioc->shost->can_queue = ioc->scsiio_depth; + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "scsi host: can_queue depth (%d)\n", + ioc->name, ioc->shost->can_queue)); + + + /* contiguous pool for request and chains, 16 byte align, one extra " + * "frame for smid=0 + */ + ioc->chain_depth = ioc->chains_needed_per_io * ioc->scsiio_depth; + sz = ((ioc->scsiio_depth + 1) * ioc->request_sz); + + /* hi-priority queue */ + sz += (ioc->hi_priority_depth * ioc->request_sz); + + /* internal queue */ + sz += (ioc->internal_depth * ioc->request_sz); + + ioc->request_dma_sz = sz; + ioc->request = pci_alloc_consistent(ioc->pdev, sz, &ioc->request_dma); + if (!ioc->request) { + pr_err(MPT3SAS_FMT "request pool: pci_alloc_consistent " \ + "failed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), " + "total(%d kB)\n", ioc->name, ioc->hba_queue_depth, + ioc->chains_needed_per_io, ioc->request_sz, sz/1024); + if (ioc->scsiio_depth < MPT3SAS_SAS_QUEUE_DEPTH) + goto out; + retry_sz += 64; + ioc->hba_queue_depth = max_request_credit - retry_sz; + goto retry_allocation; + } + + if (retry_sz) + pr_err(MPT3SAS_FMT "request pool: pci_alloc_consistent " \ + "succeed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), " + "total(%d kb)\n", ioc->name, ioc->hba_queue_depth, + ioc->chains_needed_per_io, ioc->request_sz, sz/1024); + + /* hi-priority queue */ + ioc->hi_priority = ioc->request + ((ioc->scsiio_depth + 1) * + ioc->request_sz); + ioc->hi_priority_dma = ioc->request_dma + ((ioc->scsiio_depth + 1) * + ioc->request_sz); + + /* internal queue */ + ioc->internal = ioc->hi_priority + (ioc->hi_priority_depth * + ioc->request_sz); + ioc->internal_dma = ioc->hi_priority_dma + (ioc->hi_priority_depth * + ioc->request_sz); + + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "request pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB)\n", + ioc->name, ioc->request, ioc->hba_queue_depth, ioc->request_sz, + (ioc->hba_queue_depth * ioc->request_sz)/1024)); + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "request pool: dma(0x%llx)\n", + ioc->name, (unsigned long long) ioc->request_dma)); + total_sz += sz; + + sz = ioc->scsiio_depth * sizeof(struct scsiio_tracker); + ioc->scsi_lookup_pages = get_order(sz); + ioc->scsi_lookup = (struct scsiio_tracker *)__get_free_pages( + GFP_KERNEL, ioc->scsi_lookup_pages); + if (!ioc->scsi_lookup) { + pr_err(MPT3SAS_FMT "scsi_lookup: get_free_pages failed, sz(%d)\n", + ioc->name, (int)sz); + goto out; + } + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "scsiio(0x%p): depth(%d)\n", + ioc->name, ioc->request, ioc->scsiio_depth)); + + ioc->chain_depth = min_t(u32, ioc->chain_depth, MAX_CHAIN_DEPTH); + sz = ioc->chain_depth * sizeof(struct chain_tracker); + ioc->chain_pages = get_order(sz); + ioc->chain_lookup = (struct chain_tracker *)__get_free_pages( + GFP_KERNEL, ioc->chain_pages); + if (!ioc->chain_lookup) { + pr_err(MPT3SAS_FMT "chain_lookup: __get_free_pages failed\n", + ioc->name); + goto out; + } + ioc->chain_dma_pool = pci_pool_create("chain pool", ioc->pdev, + ioc->request_sz, 16, 0); + if (!ioc->chain_dma_pool) { + pr_err(MPT3SAS_FMT "chain_dma_pool: pci_pool_create failed\n", + ioc->name); + goto out; + } + for (i = 0; i < ioc->chain_depth; i++) { + ioc->chain_lookup[i].chain_buffer = pci_pool_alloc( + ioc->chain_dma_pool , GFP_KERNEL, + &ioc->chain_lookup[i].chain_buffer_dma); + if (!ioc->chain_lookup[i].chain_buffer) { + ioc->chain_depth = i; + goto chain_done; + } + total_sz += ioc->request_sz; + } + chain_done: + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "chain pool depth(%d), frame_size(%d), pool_size(%d kB)\n", + ioc->name, ioc->chain_depth, ioc->request_sz, + ((ioc->chain_depth * ioc->request_sz))/1024)); + + /* initialize hi-priority queue smid's */ + ioc->hpr_lookup = kcalloc(ioc->hi_priority_depth, + sizeof(struct request_tracker), GFP_KERNEL); + if (!ioc->hpr_lookup) { + pr_err(MPT3SAS_FMT "hpr_lookup: kcalloc failed\n", + ioc->name); + goto out; + } + ioc->hi_priority_smid = ioc->scsiio_depth + 1; + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "hi_priority(0x%p): depth(%d), start smid(%d)\n", + ioc->name, ioc->hi_priority, + ioc->hi_priority_depth, ioc->hi_priority_smid)); + + /* initialize internal queue smid's */ + ioc->internal_lookup = kcalloc(ioc->internal_depth, + sizeof(struct request_tracker), GFP_KERNEL); + if (!ioc->internal_lookup) { + pr_err(MPT3SAS_FMT "internal_lookup: kcalloc failed\n", + ioc->name); + goto out; + } + ioc->internal_smid = ioc->hi_priority_smid + ioc->hi_priority_depth; + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "internal(0x%p): depth(%d), start smid(%d)\n", + ioc->name, ioc->internal, + ioc->internal_depth, ioc->internal_smid)); + + /* sense buffers, 4 byte align */ + sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE; + ioc->sense_dma_pool = pci_pool_create("sense pool", ioc->pdev, sz, 4, + 0); + if (!ioc->sense_dma_pool) { + pr_err(MPT3SAS_FMT "sense pool: pci_pool_create failed\n", + ioc->name); + goto out; + } + ioc->sense = pci_pool_alloc(ioc->sense_dma_pool , GFP_KERNEL, + &ioc->sense_dma); + if (!ioc->sense) { + pr_err(MPT3SAS_FMT "sense pool: pci_pool_alloc failed\n", + ioc->name); + goto out; + } + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "sense pool(0x%p): depth(%d), element_size(%d), pool_size" + "(%d kB)\n", ioc->name, ioc->sense, ioc->scsiio_depth, + SCSI_SENSE_BUFFERSIZE, sz/1024)); + dinitprintk(ioc, pr_info(MPT3SAS_FMT "sense_dma(0x%llx)\n", + ioc->name, (unsigned long long)ioc->sense_dma)); + total_sz += sz; + + /* reply pool, 4 byte align */ + sz = ioc->reply_free_queue_depth * ioc->reply_sz; + ioc->reply_dma_pool = pci_pool_create("reply pool", ioc->pdev, sz, 4, + 0); + if (!ioc->reply_dma_pool) { + pr_err(MPT3SAS_FMT "reply pool: pci_pool_create failed\n", + ioc->name); + goto out; + } + ioc->reply = pci_pool_alloc(ioc->reply_dma_pool , GFP_KERNEL, + &ioc->reply_dma); + if (!ioc->reply) { + pr_err(MPT3SAS_FMT "reply pool: pci_pool_alloc failed\n", + ioc->name); + goto out; + } + ioc->reply_dma_min_address = (u32)(ioc->reply_dma); + ioc->reply_dma_max_address = (u32)(ioc->reply_dma) + sz; + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "reply pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB)\n", + ioc->name, ioc->reply, + ioc->reply_free_queue_depth, ioc->reply_sz, sz/1024)); + dinitprintk(ioc, pr_info(MPT3SAS_FMT "reply_dma(0x%llx)\n", + ioc->name, (unsigned long long)ioc->reply_dma)); + total_sz += sz; + + /* reply free queue, 16 byte align */ + sz = ioc->reply_free_queue_depth * 4; + ioc->reply_free_dma_pool = pci_pool_create("reply_free pool", + ioc->pdev, sz, 16, 0); + if (!ioc->reply_free_dma_pool) { + pr_err(MPT3SAS_FMT "reply_free pool: pci_pool_create failed\n", + ioc->name); + goto out; + } + ioc->reply_free = pci_pool_alloc(ioc->reply_free_dma_pool , GFP_KERNEL, + &ioc->reply_free_dma); + if (!ioc->reply_free) { + pr_err(MPT3SAS_FMT "reply_free pool: pci_pool_alloc failed\n", + ioc->name); + goto out; + } + memset(ioc->reply_free, 0, sz); + dinitprintk(ioc, pr_info(MPT3SAS_FMT "reply_free pool(0x%p): " \ + "depth(%d), element_size(%d), pool_size(%d kB)\n", ioc->name, + ioc->reply_free, ioc->reply_free_queue_depth, 4, sz/1024)); + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "reply_free_dma (0x%llx)\n", + ioc->name, (unsigned long long)ioc->reply_free_dma)); + total_sz += sz; + + /* reply post queue, 16 byte align */ + reply_post_free_sz = ioc->reply_post_queue_depth * + sizeof(Mpi2DefaultReplyDescriptor_t); + if (_base_is_controller_msix_enabled(ioc)) + sz = reply_post_free_sz * ioc->reply_queue_count; + else + sz = reply_post_free_sz; + ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool", + ioc->pdev, sz, 16, 0); + if (!ioc->reply_post_free_dma_pool) { + pr_err(MPT3SAS_FMT + "reply_post_free pool: pci_pool_create failed\n", + ioc->name); + goto out; + } + ioc->reply_post_free = pci_pool_alloc(ioc->reply_post_free_dma_pool , + GFP_KERNEL, &ioc->reply_post_free_dma); + if (!ioc->reply_post_free) { + pr_err(MPT3SAS_FMT + "reply_post_free pool: pci_pool_alloc failed\n", + ioc->name); + goto out; + } + memset(ioc->reply_post_free, 0, sz); + dinitprintk(ioc, pr_info(MPT3SAS_FMT "reply post free pool" \ + "(0x%p): depth(%d), element_size(%d), pool_size(%d kB)\n", + ioc->name, ioc->reply_post_free, ioc->reply_post_queue_depth, 8, + sz/1024)); + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "reply_post_free_dma = (0x%llx)\n", + ioc->name, (unsigned long long) + ioc->reply_post_free_dma)); + total_sz += sz; + + ioc->config_page_sz = 512; + ioc->config_page = pci_alloc_consistent(ioc->pdev, + ioc->config_page_sz, &ioc->config_page_dma); + if (!ioc->config_page) { + pr_err(MPT3SAS_FMT + "config page: pci_pool_alloc failed\n", + ioc->name); + goto out; + } + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "config page(0x%p): size(%d)\n", + ioc->name, ioc->config_page, ioc->config_page_sz)); + dinitprintk(ioc, pr_info(MPT3SAS_FMT "config_page_dma(0x%llx)\n", + ioc->name, (unsigned long long)ioc->config_page_dma)); + total_sz += ioc->config_page_sz; + + pr_info(MPT3SAS_FMT "Allocated physical memory: size(%d kB)\n", + ioc->name, total_sz/1024); + pr_info(MPT3SAS_FMT + "Current Controller Queue Depth(%d),Max Controller Queue Depth(%d)\n", + ioc->name, ioc->shost->can_queue, facts->RequestCredit); + pr_info(MPT3SAS_FMT "Scatter Gather Elements per IO(%d)\n", + ioc->name, ioc->shost->sg_tablesize); + return 0; + + out: + return -ENOMEM; +} + +/** + * mpt3sas_base_get_iocstate - Get the current state of a MPT adapter. + * @ioc: Pointer to MPT_ADAPTER structure + * @cooked: Request raw or cooked IOC state + * + * Returns all IOC Doorbell register bits if cooked==0, else just the + * Doorbell bits in MPI_IOC_STATE_MASK. + */ +u32 +mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked) +{ + u32 s, sc; + + s = readl(&ioc->chip->Doorbell); + sc = s & MPI2_IOC_STATE_MASK; + return cooked ? sc : s; +} + +/** + * _base_wait_on_iocstate - waiting on a particular ioc state + * @ioc_state: controller state { READY, OPERATIONAL, or RESET } + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32 ioc_state, int timeout, + int sleep_flag) +{ + u32 count, cntdn; + u32 current_state; + + count = 0; + cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; + do { + current_state = mpt3sas_base_get_iocstate(ioc, 1); + if (current_state == ioc_state) + return 0; + if (count && current_state == MPI2_IOC_STATE_FAULT) + break; + if (sleep_flag == CAN_SLEEP) + usleep_range(1000, 1500); + else + udelay(500); + count++; + } while (--cntdn); + + return current_state; +} + +/** + * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by + * a write to the doorbell) + * @ioc: per adapter object + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + * + * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell. + */ +static int +_base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout, + int sleep_flag) +{ + u32 cntdn, count; + u32 int_status; + + count = 0; + cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; + do { + int_status = readl(&ioc->chip->HostInterruptStatus); + if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { + dhsprintk(ioc, pr_info(MPT3SAS_FMT + "%s: successful count(%d), timeout(%d)\n", + ioc->name, __func__, count, timeout)); + return 0; + } + if (sleep_flag == CAN_SLEEP) + usleep_range(1000, 1500); + else + udelay(500); + count++; + } while (--cntdn); + + pr_err(MPT3SAS_FMT + "%s: failed due to timeout count(%d), int_status(%x)!\n", + ioc->name, __func__, count, int_status); + return -EFAULT; +} + +/** + * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell. + * @ioc: per adapter object + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + * + * Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to + * doorbell. + */ +static int +_base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout, + int sleep_flag) +{ + u32 cntdn, count; + u32 int_status; + u32 doorbell; + + count = 0; + cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; + do { + int_status = readl(&ioc->chip->HostInterruptStatus); + if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) { + dhsprintk(ioc, pr_info(MPT3SAS_FMT + "%s: successful count(%d), timeout(%d)\n", + ioc->name, __func__, count, timeout)); + return 0; + } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { + doorbell = readl(&ioc->chip->Doorbell); + if ((doorbell & MPI2_IOC_STATE_MASK) == + MPI2_IOC_STATE_FAULT) { + mpt3sas_base_fault_info(ioc , doorbell); + return -EFAULT; + } + } else if (int_status == 0xFFFFFFFF) + goto out; + + if (sleep_flag == CAN_SLEEP) + usleep_range(1000, 1500); + else + udelay(500); + count++; + } while (--cntdn); + + out: + pr_err(MPT3SAS_FMT + "%s: failed due to timeout count(%d), int_status(%x)!\n", + ioc->name, __func__, count, int_status); + return -EFAULT; +} + +/** + * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use + * @ioc: per adapter object + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + * + */ +static int +_base_wait_for_doorbell_not_used(struct MPT3SAS_ADAPTER *ioc, int timeout, + int sleep_flag) +{ + u32 cntdn, count; + u32 doorbell_reg; + + count = 0; + cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; + do { + doorbell_reg = readl(&ioc->chip->Doorbell); + if (!(doorbell_reg & MPI2_DOORBELL_USED)) { + dhsprintk(ioc, pr_info(MPT3SAS_FMT + "%s: successful count(%d), timeout(%d)\n", + ioc->name, __func__, count, timeout)); + return 0; + } + if (sleep_flag == CAN_SLEEP) + usleep_range(1000, 1500); + else + udelay(500); + count++; + } while (--cntdn); + + pr_err(MPT3SAS_FMT + "%s: failed due to timeout count(%d), doorbell_reg(%x)!\n", + ioc->name, __func__, count, doorbell_reg); + return -EFAULT; +} + +/** + * _base_send_ioc_reset - send doorbell reset + * @ioc: per adapter object + * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout, + int sleep_flag) +{ + u32 ioc_state; + int r = 0; + + if (reset_type != MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET) { + pr_err(MPT3SAS_FMT "%s: unknown reset_type\n", + ioc->name, __func__); + return -EFAULT; + } + + if (!(ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY)) + return -EFAULT; + + pr_info(MPT3SAS_FMT "sending message unit reset !!\n", ioc->name); + + writel(reset_type << MPI2_DOORBELL_FUNCTION_SHIFT, + &ioc->chip->Doorbell); + if ((_base_wait_for_doorbell_ack(ioc, 15, sleep_flag))) { + r = -EFAULT; + goto out; + } + ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, + timeout, sleep_flag); + if (ioc_state) { + pr_err(MPT3SAS_FMT + "%s: failed going to ready state (ioc_state=0x%x)\n", + ioc->name, __func__, ioc_state); + r = -EFAULT; + goto out; + } + out: + pr_info(MPT3SAS_FMT "message unit reset: %s\n", + ioc->name, ((r == 0) ? "SUCCESS" : "FAILED")); + return r; +} + +/** + * _base_handshake_req_reply_wait - send request thru doorbell interface + * @ioc: per adapter object + * @request_bytes: request length + * @request: pointer having request payload + * @reply_bytes: reply length + * @reply: pointer to reply payload + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes, + u32 *request, int reply_bytes, u16 *reply, int timeout, int sleep_flag) +{ + MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply; + int i; + u8 failed; + u16 dummy; + __le32 *mfp; + + /* make sure doorbell is not in use */ + if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) { + pr_err(MPT3SAS_FMT + "doorbell is in use (line=%d)\n", + ioc->name, __LINE__); + return -EFAULT; + } + + /* clear pending doorbell interrupts from previous state changes */ + if (readl(&ioc->chip->HostInterruptStatus) & + MPI2_HIS_IOC2SYS_DB_STATUS) + writel(0, &ioc->chip->HostInterruptStatus); + + /* send message to ioc */ + writel(((MPI2_FUNCTION_HANDSHAKE<<MPI2_DOORBELL_FUNCTION_SHIFT) | + ((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)), + &ioc->chip->Doorbell); + + if ((_base_wait_for_doorbell_int(ioc, 5, NO_SLEEP))) { + pr_err(MPT3SAS_FMT + "doorbell handshake int failed (line=%d)\n", + ioc->name, __LINE__); + return -EFAULT; + } + writel(0, &ioc->chip->HostInterruptStatus); + + if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) { + pr_err(MPT3SAS_FMT + "doorbell handshake ack failed (line=%d)\n", + ioc->name, __LINE__); + return -EFAULT; + } + + /* send message 32-bits at a time */ + for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) { + writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell); + if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) + failed = 1; + } + + if (failed) { + pr_err(MPT3SAS_FMT + "doorbell handshake sending request failed (line=%d)\n", + ioc->name, __LINE__); + return -EFAULT; + } + + /* now wait for the reply */ + if ((_base_wait_for_doorbell_int(ioc, timeout, sleep_flag))) { + pr_err(MPT3SAS_FMT + "doorbell handshake int failed (line=%d)\n", + ioc->name, __LINE__); + return -EFAULT; + } + + /* read the first two 16-bits, it gives the total length of the reply */ + reply[0] = le16_to_cpu(readl(&ioc->chip->Doorbell) + & MPI2_DOORBELL_DATA_MASK); + writel(0, &ioc->chip->HostInterruptStatus); + if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) { + pr_err(MPT3SAS_FMT + "doorbell handshake int failed (line=%d)\n", + ioc->name, __LINE__); + return -EFAULT; + } + reply[1] = le16_to_cpu(readl(&ioc->chip->Doorbell) + & MPI2_DOORBELL_DATA_MASK); + writel(0, &ioc->chip->HostInterruptStatus); + + for (i = 2; i < default_reply->MsgLength * 2; i++) { + if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) { + pr_err(MPT3SAS_FMT + "doorbell handshake int failed (line=%d)\n", + ioc->name, __LINE__); + return -EFAULT; + } + if (i >= reply_bytes/2) /* overflow case */ + dummy = readl(&ioc->chip->Doorbell); + else + reply[i] = le16_to_cpu(readl(&ioc->chip->Doorbell) + & MPI2_DOORBELL_DATA_MASK); + writel(0, &ioc->chip->HostInterruptStatus); + } + + _base_wait_for_doorbell_int(ioc, 5, sleep_flag); + if (_base_wait_for_doorbell_not_used(ioc, 5, sleep_flag) != 0) { + dhsprintk(ioc, pr_info(MPT3SAS_FMT + "doorbell is in use (line=%d)\n", ioc->name, __LINE__)); + } + writel(0, &ioc->chip->HostInterruptStatus); + + if (ioc->logging_level & MPT_DEBUG_INIT) { + mfp = (__le32 *)reply; + pr_info("\toffset:data\n"); + for (i = 0; i < reply_bytes/4; i++) + pr_info("\t[0x%02x]:%08x\n", i*4, + le32_to_cpu(mfp[i])); + } + return 0; +} + +/** + * mpt3sas_base_sas_iounit_control - send sas iounit control to FW + * @ioc: per adapter object + * @mpi_reply: the reply payload from FW + * @mpi_request: the request payload sent to FW + * + * The SAS IO Unit Control Request message allows the host to perform low-level + * operations, such as resets on the PHYs of the IO Unit, also allows the host + * to obtain the IOC assigned device handles for a device if it has other + * identifying information about the device, in addition allows the host to + * remove IOC resources associated with the device. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc, + Mpi2SasIoUnitControlReply_t *mpi_reply, + Mpi2SasIoUnitControlRequest_t *mpi_request) +{ + u16 smid; + u32 ioc_state; + unsigned long timeleft; + u8 issue_reset; + int rc; + void *request; + u16 wait_state_count; + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + mutex_lock(&ioc->base_cmds.mutex); + + if (ioc->base_cmds.status != MPT3_CMD_NOT_USED) { + pr_err(MPT3SAS_FMT "%s: base_cmd in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + wait_state_count = 0; + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + pr_err(MPT3SAS_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + ssleep(1); + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + pr_info(MPT3SAS_FMT + "%s: waiting for operational state(count=%d)\n", + ioc->name, __func__, wait_state_count); + } + + smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + ioc->base_cmds.status = MPT3_CMD_PENDING; + request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->base_cmds.smid = smid; + memcpy(request, mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t)); + if (mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET || + mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) + ioc->ioc_link_reset_in_progress = 1; + init_completion(&ioc->base_cmds.done); + mpt3sas_base_put_smid_default(ioc, smid); + timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, + msecs_to_jiffies(10000)); + if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET || + mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) && + ioc->ioc_link_reset_in_progress) + ioc->ioc_link_reset_in_progress = 0; + if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) { + pr_err(MPT3SAS_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SasIoUnitControlRequest_t)/4); + if (!(ioc->base_cmds.status & MPT3_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID) + memcpy(mpi_reply, ioc->base_cmds.reply, + sizeof(Mpi2SasIoUnitControlReply_t)); + else + memset(mpi_reply, 0, sizeof(Mpi2SasIoUnitControlReply_t)); + ioc->base_cmds.status = MPT3_CMD_NOT_USED; + goto out; + + issue_host_reset: + if (issue_reset) + mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + ioc->base_cmds.status = MPT3_CMD_NOT_USED; + rc = -EFAULT; + out: + mutex_unlock(&ioc->base_cmds.mutex); + return rc; +} + +/** + * mpt3sas_base_scsi_enclosure_processor - sending request to sep device + * @ioc: per adapter object + * @mpi_reply: the reply payload from FW + * @mpi_request: the request payload sent to FW + * + * The SCSI Enclosure Processor request message causes the IOC to + * communicate with SES devices to control LED status signals. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc, + Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request) +{ + u16 smid; + u32 ioc_state; + unsigned long timeleft; + u8 issue_reset; + int rc; + void *request; + u16 wait_state_count; + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + mutex_lock(&ioc->base_cmds.mutex); + + if (ioc->base_cmds.status != MPT3_CMD_NOT_USED) { + pr_err(MPT3SAS_FMT "%s: base_cmd in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + wait_state_count = 0; + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + pr_err(MPT3SAS_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + ssleep(1); + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + pr_info(MPT3SAS_FMT + "%s: waiting for operational state(count=%d)\n", + ioc->name, + __func__, wait_state_count); + } + + smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + ioc->base_cmds.status = MPT3_CMD_PENDING; + request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->base_cmds.smid = smid; + memcpy(request, mpi_request, sizeof(Mpi2SepReply_t)); + init_completion(&ioc->base_cmds.done); + mpt3sas_base_put_smid_default(ioc, smid); + timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, + msecs_to_jiffies(10000)); + if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) { + pr_err(MPT3SAS_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SepRequest_t)/4); + if (!(ioc->base_cmds.status & MPT3_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID) + memcpy(mpi_reply, ioc->base_cmds.reply, + sizeof(Mpi2SepReply_t)); + else + memset(mpi_reply, 0, sizeof(Mpi2SepReply_t)); + ioc->base_cmds.status = MPT3_CMD_NOT_USED; + goto out; + + issue_host_reset: + if (issue_reset) + mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + ioc->base_cmds.status = MPT3_CMD_NOT_USED; + rc = -EFAULT; + out: + mutex_unlock(&ioc->base_cmds.mutex); + return rc; +} + +/** + * _base_get_port_facts - obtain port facts reply and save in ioc + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_get_port_facts(struct MPT3SAS_ADAPTER *ioc, int port, int sleep_flag) +{ + Mpi2PortFactsRequest_t mpi_request; + Mpi2PortFactsReply_t mpi_reply; + struct mpt3sas_port_facts *pfacts; + int mpi_reply_sz, mpi_request_sz, r; + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + mpi_reply_sz = sizeof(Mpi2PortFactsReply_t); + mpi_request_sz = sizeof(Mpi2PortFactsRequest_t); + memset(&mpi_request, 0, mpi_request_sz); + mpi_request.Function = MPI2_FUNCTION_PORT_FACTS; + mpi_request.PortNumber = port; + r = _base_handshake_req_reply_wait(ioc, mpi_request_sz, + (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP); + + if (r != 0) { + pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n", + ioc->name, __func__, r); + return r; + } + + pfacts = &ioc->pfacts[port]; + memset(pfacts, 0, sizeof(struct mpt3sas_port_facts)); + pfacts->PortNumber = mpi_reply.PortNumber; + pfacts->VP_ID = mpi_reply.VP_ID; + pfacts->VF_ID = mpi_reply.VF_ID; + pfacts->MaxPostedCmdBuffers = + le16_to_cpu(mpi_reply.MaxPostedCmdBuffers); + + return 0; +} + +/** + * _base_get_ioc_facts - obtain ioc facts reply and save in ioc + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) +{ + Mpi2IOCFactsRequest_t mpi_request; + Mpi2IOCFactsReply_t mpi_reply; + struct mpt3sas_facts *facts; + int mpi_reply_sz, mpi_request_sz, r; + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t); + mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t); + memset(&mpi_request, 0, mpi_request_sz); + mpi_request.Function = MPI2_FUNCTION_IOC_FACTS; + r = _base_handshake_req_reply_wait(ioc, mpi_request_sz, + (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP); + + if (r != 0) { + pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n", + ioc->name, __func__, r); + return r; + } + + facts = &ioc->facts; + memset(facts, 0, sizeof(struct mpt3sas_facts)); + facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion); + facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion); + facts->VP_ID = mpi_reply.VP_ID; + facts->VF_ID = mpi_reply.VF_ID; + facts->IOCExceptions = le16_to_cpu(mpi_reply.IOCExceptions); + facts->MaxChainDepth = mpi_reply.MaxChainDepth; + facts->WhoInit = mpi_reply.WhoInit; + facts->NumberOfPorts = mpi_reply.NumberOfPorts; + facts->MaxMSIxVectors = mpi_reply.MaxMSIxVectors; + facts->RequestCredit = le16_to_cpu(mpi_reply.RequestCredit); + facts->MaxReplyDescriptorPostQueueDepth = + le16_to_cpu(mpi_reply.MaxReplyDescriptorPostQueueDepth); + facts->ProductID = le16_to_cpu(mpi_reply.ProductID); + facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities); + if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID)) + ioc->ir_firmware = 1; + facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word); + facts->IOCRequestFrameSize = + le16_to_cpu(mpi_reply.IOCRequestFrameSize); + facts->MaxInitiators = le16_to_cpu(mpi_reply.MaxInitiators); + facts->MaxTargets = le16_to_cpu(mpi_reply.MaxTargets); + ioc->shost->max_id = -1; + facts->MaxSasExpanders = le16_to_cpu(mpi_reply.MaxSasExpanders); + facts->MaxEnclosures = le16_to_cpu(mpi_reply.MaxEnclosures); + facts->ProtocolFlags = le16_to_cpu(mpi_reply.ProtocolFlags); + facts->HighPriorityCredit = + le16_to_cpu(mpi_reply.HighPriorityCredit); + facts->ReplyFrameSize = mpi_reply.ReplyFrameSize; + facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle); + + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "hba queue depth(%d), max chains per io(%d)\n", + ioc->name, facts->RequestCredit, + facts->MaxChainDepth)); + dinitprintk(ioc, pr_info(MPT3SAS_FMT + "request frame size(%d), reply frame size(%d)\n", ioc->name, + facts->IOCRequestFrameSize * 4, facts->ReplyFrameSize * 4)); + return 0; +} + +/** + * _base_send_ioc_init - send ioc_init to firmware + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) +{ + Mpi2IOCInitRequest_t mpi_request; + Mpi2IOCInitReply_t mpi_reply; + int r; + struct timeval current_time; + u16 ioc_status; + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + memset(&mpi_request, 0, sizeof(Mpi2IOCInitRequest_t)); + mpi_request.Function = MPI2_FUNCTION_IOC_INIT; + mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER; + mpi_request.VF_ID = 0; /* TODO */ + mpi_request.VP_ID = 0; + mpi_request.MsgVersion = cpu_to_le16(MPI2_VERSION); + mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION); + + if (_base_is_controller_msix_enabled(ioc)) + mpi_request.HostMSIxVectors = ioc->reply_queue_count; + mpi_request.SystemRequestFrameSize = cpu_to_le16(ioc->request_sz/4); + mpi_request.ReplyDescriptorPostQueueDepth = + cpu_to_le16(ioc->reply_post_queue_depth); + mpi_request.ReplyFreeQueueDepth = + cpu_to_le16(ioc->reply_free_queue_depth); + + mpi_request.SenseBufferAddressHigh = + cpu_to_le32((u64)ioc->sense_dma >> 32); + mpi_request.SystemReplyAddressHigh = + cpu_to_le32((u64)ioc->reply_dma >> 32); + mpi_request.SystemRequestFrameBaseAddress = + cpu_to_le64((u64)ioc->request_dma); + mpi_request.ReplyFreeQueueAddress = + cpu_to_le64((u64)ioc->reply_free_dma); + mpi_request.ReplyDescriptorPostQueueAddress = + cpu_to_le64((u64)ioc->reply_post_free_dma); + + + /* This time stamp specifies number of milliseconds + * since epoch ~ midnight January 1, 1970. + */ + do_gettimeofday(¤t_time); + mpi_request.TimeStamp = cpu_to_le64((u64)current_time.tv_sec * 1000 + + (current_time.tv_usec / 1000)); + + if (ioc->logging_level & MPT_DEBUG_INIT) { + __le32 *mfp; + int i; + + mfp = (__le32 *)&mpi_request; + pr_info("\toffset:data\n"); + for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++) + pr_info("\t[0x%02x]:%08x\n", i*4, + le32_to_cpu(mfp[i])); + } + + r = _base_handshake_req_reply_wait(ioc, + sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request, + sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10, + sleep_flag); + + if (r != 0) { + pr_err(MPT3SAS_FMT "%s: handshake failed (r=%d)\n", + ioc->name, __func__, r); + return r; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS || + mpi_reply.IOCLogInfo) { + pr_err(MPT3SAS_FMT "%s: failed\n", ioc->name, __func__); + r = -EIO; + } + + return 0; +} + +/** + * mpt3sas_port_enable_done - command completion routine for port enable + * @ioc: per adapter object + * @smid: system request message index + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. + */ +u8 +mpt3sas_port_enable_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, + u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + u16 ioc_status; + + if (ioc->port_enable_cmds.status == MPT3_CMD_NOT_USED) + return 1; + + mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); + if (!mpi_reply) + return 1; + + if (mpi_reply->Function != MPI2_FUNCTION_PORT_ENABLE) + return 1; + + ioc->port_enable_cmds.status &= ~MPT3_CMD_PENDING; + ioc->port_enable_cmds.status |= MPT3_CMD_COMPLETE; + ioc->port_enable_cmds.status |= MPT3_CMD_REPLY_VALID; + memcpy(ioc->port_enable_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); + ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) + ioc->port_enable_failed = 1; + + if (ioc->is_driver_loading) { + if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { + mpt3sas_port_enable_complete(ioc); + return 1; + } else { + ioc->start_scan_failed = ioc_status; + ioc->start_scan = 0; + return 1; + } + } + complete(&ioc->port_enable_cmds.done); + return 1; +} + +/** + * _base_send_port_enable - send port_enable(discovery stuff) to firmware + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_send_port_enable(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) +{ + Mpi2PortEnableRequest_t *mpi_request; + Mpi2PortEnableReply_t *mpi_reply; + unsigned long timeleft; + int r = 0; + u16 smid; + u16 ioc_status; + + pr_info(MPT3SAS_FMT "sending port enable !!\n", ioc->name); + + if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) { + pr_err(MPT3SAS_FMT "%s: internal command already in use\n", + ioc->name, __func__); + return -EAGAIN; + } + + smid = mpt3sas_base_get_smid(ioc, ioc->port_enable_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + return -EAGAIN; + } + + ioc->port_enable_cmds.status = MPT3_CMD_PENDING; + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->port_enable_cmds.smid = smid; + memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t)); + mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE; + + init_completion(&ioc->port_enable_cmds.done); + mpt3sas_base_put_smid_default(ioc, smid); + timeleft = wait_for_completion_timeout(&ioc->port_enable_cmds.done, + 300*HZ); + if (!(ioc->port_enable_cmds.status & MPT3_CMD_COMPLETE)) { + pr_err(MPT3SAS_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2PortEnableRequest_t)/4); + if (ioc->port_enable_cmds.status & MPT3_CMD_RESET) + r = -EFAULT; + else + r = -ETIME; + goto out; + } + + mpi_reply = ioc->port_enable_cmds.reply; + ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + pr_err(MPT3SAS_FMT "%s: failed with (ioc_status=0x%08x)\n", + ioc->name, __func__, ioc_status); + r = -EFAULT; + goto out; + } + + out: + ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED; + pr_info(MPT3SAS_FMT "port enable: %s\n", ioc->name, ((r == 0) ? + "SUCCESS" : "FAILED")); + return r; +} + +/** + * mpt3sas_port_enable - initiate firmware discovery (don't wait for reply) + * @ioc: per adapter object + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc) +{ + Mpi2PortEnableRequest_t *mpi_request; + u16 smid; + + pr_info(MPT3SAS_FMT "sending port enable !!\n", ioc->name); + + if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) { + pr_err(MPT3SAS_FMT "%s: internal command already in use\n", + ioc->name, __func__); + return -EAGAIN; + } + + smid = mpt3sas_base_get_smid(ioc, ioc->port_enable_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + return -EAGAIN; + } + + ioc->port_enable_cmds.status = MPT3_CMD_PENDING; + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->port_enable_cmds.smid = smid; + memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t)); + mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE; + + mpt3sas_base_put_smid_default(ioc, smid); + return 0; +} + +/** + * _base_determine_wait_on_discovery - desposition + * @ioc: per adapter object + * + * Decide whether to wait on discovery to complete. Used to either + * locate boot device, or report volumes ahead of physical devices. + * + * Returns 1 for wait, 0 for don't wait + */ +static int +_base_determine_wait_on_discovery(struct MPT3SAS_ADAPTER *ioc) +{ + /* We wait for discovery to complete if IR firmware is loaded. + * The sas topology events arrive before PD events, so we need time to + * turn on the bit in ioc->pd_handles to indicate PD + * Also, it maybe required to report Volumes ahead of physical + * devices when MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING is set. + */ + if (ioc->ir_firmware) + return 1; + + /* if no Bios, then we don't need to wait */ + if (!ioc->bios_pg3.BiosVersion) + return 0; + + /* Bios is present, then we drop down here. + * + * If there any entries in the Bios Page 2, then we wait + * for discovery to complete. + */ + + /* Current Boot Device */ + if ((ioc->bios_pg2.CurrentBootDeviceForm & + MPI2_BIOSPAGE2_FORM_MASK) == + MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED && + /* Request Boot Device */ + (ioc->bios_pg2.ReqBootDeviceForm & + MPI2_BIOSPAGE2_FORM_MASK) == + MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED && + /* Alternate Request Boot Device */ + (ioc->bios_pg2.ReqAltBootDeviceForm & + MPI2_BIOSPAGE2_FORM_MASK) == + MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED) + return 0; + + return 1; +} + +/** + * _base_unmask_events - turn on notification for this event + * @ioc: per adapter object + * @event: firmware event + * + * The mask is stored in ioc->event_masks. + */ +static void +_base_unmask_events(struct MPT3SAS_ADAPTER *ioc, u16 event) +{ + u32 desired_event; + + if (event >= 128) + return; + + desired_event = (1 << (event % 32)); + + if (event < 32) + ioc->event_masks[0] &= ~desired_event; + else if (event < 64) + ioc->event_masks[1] &= ~desired_event; + else if (event < 96) + ioc->event_masks[2] &= ~desired_event; + else if (event < 128) + ioc->event_masks[3] &= ~desired_event; +} + +/** + * _base_event_notification - send event notification + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_event_notification(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) +{ + Mpi2EventNotificationRequest_t *mpi_request; + unsigned long timeleft; + u16 smid; + int r = 0; + int i; + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + if (ioc->base_cmds.status & MPT3_CMD_PENDING) { + pr_err(MPT3SAS_FMT "%s: internal command already in use\n", + ioc->name, __func__); + return -EAGAIN; + } + + smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + return -EAGAIN; + } + ioc->base_cmds.status = MPT3_CMD_PENDING; + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->base_cmds.smid = smid; + memset(mpi_request, 0, sizeof(Mpi2EventNotificationRequest_t)); + mpi_request->Function = MPI2_FUNCTION_EVENT_NOTIFICATION; + mpi_request->VF_ID = 0; /* TODO */ + mpi_request->VP_ID = 0; + for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) + mpi_request->EventMasks[i] = + cpu_to_le32(ioc->event_masks[i]); + init_completion(&ioc->base_cmds.done); + mpt3sas_base_put_smid_default(ioc, smid); + timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ); + if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) { + pr_err(MPT3SAS_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2EventNotificationRequest_t)/4); + if (ioc->base_cmds.status & MPT3_CMD_RESET) + r = -EFAULT; + else + r = -ETIME; + } else + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s: complete\n", + ioc->name, __func__)); + ioc->base_cmds.status = MPT3_CMD_NOT_USED; + return r; +} + +/** + * mpt3sas_base_validate_event_type - validating event types + * @ioc: per adapter object + * @event: firmware event + * + * This will turn on firmware event notification when application + * ask for that event. We don't mask events that are already enabled. + */ +void +mpt3sas_base_validate_event_type(struct MPT3SAS_ADAPTER *ioc, u32 *event_type) +{ + int i, j; + u32 event_mask, desired_event; + u8 send_update_to_fw; + + for (i = 0, send_update_to_fw = 0; i < + MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) { + event_mask = ~event_type[i]; + desired_event = 1; + for (j = 0; j < 32; j++) { + if (!(event_mask & desired_event) && + (ioc->event_masks[i] & desired_event)) { + ioc->event_masks[i] &= ~desired_event; + send_update_to_fw = 1; + } + desired_event = (desired_event << 1); + } + } + + if (!send_update_to_fw) + return; + + mutex_lock(&ioc->base_cmds.mutex); + _base_event_notification(ioc, CAN_SLEEP); + mutex_unlock(&ioc->base_cmds.mutex); +} + +/** + * _base_diag_reset - the "big hammer" start of day reset + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_diag_reset(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) +{ + u32 host_diagnostic; + u32 ioc_state; + u32 count; + u32 hcb_size; + + pr_info(MPT3SAS_FMT "sending diag reset !!\n", ioc->name); + + drsprintk(ioc, pr_info(MPT3SAS_FMT "clear interrupts\n", + ioc->name)); + + count = 0; + do { + /* Write magic sequence to WriteSequence register + * Loop until in diagnostic mode + */ + drsprintk(ioc, pr_info(MPT3SAS_FMT + "write magic sequence\n", ioc->name)); + writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_1ST_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_2ND_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_3RD_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_4TH_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_5TH_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_6TH_KEY_VALUE, &ioc->chip->WriteSequence); + + /* wait 100 msec */ + if (sleep_flag == CAN_SLEEP) + msleep(100); + else + mdelay(100); + + if (count++ > 20) + goto out; + + host_diagnostic = readl(&ioc->chip->HostDiagnostic); + drsprintk(ioc, pr_info(MPT3SAS_FMT + "wrote magic sequence: count(%d), host_diagnostic(0x%08x)\n", + ioc->name, count, host_diagnostic)); + + } while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0); + + hcb_size = readl(&ioc->chip->HCBSize); + + drsprintk(ioc, pr_info(MPT3SAS_FMT "diag reset: issued\n", + ioc->name)); + writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER, + &ioc->chip->HostDiagnostic); + + /* don't access any registers for 50 milliseconds */ + msleep(50); + + /* 300 second max wait */ + for (count = 0; count < 3000000 ; count++) { + + host_diagnostic = readl(&ioc->chip->HostDiagnostic); + + if (host_diagnostic == 0xFFFFFFFF) + goto out; + if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER)) + break; + + /* wait 1 msec */ + if (sleep_flag == CAN_SLEEP) + usleep_range(1000, 1500); + else + mdelay(1); + } + + if (host_diagnostic & MPI2_DIAG_HCB_MODE) { + + drsprintk(ioc, pr_info(MPT3SAS_FMT + "restart the adapter assuming the HCB Address points to good F/W\n", + ioc->name)); + host_diagnostic &= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK; + host_diagnostic |= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW; + writel(host_diagnostic, &ioc->chip->HostDiagnostic); + + drsprintk(ioc, pr_info(MPT3SAS_FMT + "re-enable the HCDW\n", ioc->name)); + writel(hcb_size | MPI2_HCB_SIZE_HCB_ENABLE, + &ioc->chip->HCBSize); + } + + drsprintk(ioc, pr_info(MPT3SAS_FMT "restart the adapter\n", + ioc->name)); + writel(host_diagnostic & ~MPI2_DIAG_HOLD_IOC_RESET, + &ioc->chip->HostDiagnostic); + + drsprintk(ioc, pr_info(MPT3SAS_FMT + "disable writes to the diagnostic register\n", ioc->name)); + writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence); + + drsprintk(ioc, pr_info(MPT3SAS_FMT + "Wait for FW to go to the READY state\n", ioc->name)); + ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20, + sleep_flag); + if (ioc_state) { + pr_err(MPT3SAS_FMT + "%s: failed going to ready state (ioc_state=0x%x)\n", + ioc->name, __func__, ioc_state); + goto out; + } + + pr_info(MPT3SAS_FMT "diag reset: SUCCESS\n", ioc->name); + return 0; + + out: + pr_err(MPT3SAS_FMT "diag reset: FAILED\n", ioc->name); + return -EFAULT; +} + +/** + * _base_make_ioc_ready - put controller in READY state + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * @type: FORCE_BIG_HAMMER or SOFT_RESET + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, int sleep_flag, + enum reset_type type) +{ + u32 ioc_state; + int rc; + int count; + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + if (ioc->pci_error_recovery) + return 0; + + ioc_state = mpt3sas_base_get_iocstate(ioc, 0); + dhsprintk(ioc, pr_info(MPT3SAS_FMT "%s: ioc_state(0x%08x)\n", + ioc->name, __func__, ioc_state)); + + /* if in RESET state, it should move to READY state shortly */ + count = 0; + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_RESET) { + while ((ioc_state & MPI2_IOC_STATE_MASK) != + MPI2_IOC_STATE_READY) { + if (count++ == 10) { + pr_err(MPT3SAS_FMT + "%s: failed going to ready state (ioc_state=0x%x)\n", + ioc->name, __func__, ioc_state); + return -EFAULT; + } + if (sleep_flag == CAN_SLEEP) + ssleep(1); + else + mdelay(1000); + ioc_state = mpt3sas_base_get_iocstate(ioc, 0); + } + } + + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY) + return 0; + + if (ioc_state & MPI2_DOORBELL_USED) { + dhsprintk(ioc, pr_info(MPT3SAS_FMT + "unexpected doorbell active!\n", + ioc->name)); + goto issue_diag_reset; + } + + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { + mpt3sas_base_fault_info(ioc, ioc_state & + MPI2_DOORBELL_DATA_MASK); + goto issue_diag_reset; + } + + if (type == FORCE_BIG_HAMMER) + goto issue_diag_reset; + + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL) + if (!(_base_send_ioc_reset(ioc, + MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15, CAN_SLEEP))) { + return 0; + } + + issue_diag_reset: + rc = _base_diag_reset(ioc, CAN_SLEEP); + return rc; +} + +/** + * _base_make_ioc_operational - put controller in OPERATIONAL state + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) +{ + int r, i; + unsigned long flags; + u32 reply_address; + u16 smid; + struct _tr_list *delayed_tr, *delayed_tr_next; + struct adapter_reply_queue *reply_q; + long reply_post_free; + u32 reply_post_free_sz; + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + /* clean the delayed target reset list */ + list_for_each_entry_safe(delayed_tr, delayed_tr_next, + &ioc->delayed_tr_list, list) { + list_del(&delayed_tr->list); + kfree(delayed_tr); + } + + + list_for_each_entry_safe(delayed_tr, delayed_tr_next, + &ioc->delayed_tr_volume_list, list) { + list_del(&delayed_tr->list); + kfree(delayed_tr); + } + + /* initialize the scsi lookup free list */ + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + INIT_LIST_HEAD(&ioc->free_list); + smid = 1; + for (i = 0; i < ioc->scsiio_depth; i++, smid++) { + INIT_LIST_HEAD(&ioc->scsi_lookup[i].chain_list); + ioc->scsi_lookup[i].cb_idx = 0xFF; + ioc->scsi_lookup[i].smid = smid; + ioc->scsi_lookup[i].scmd = NULL; + list_add_tail(&ioc->scsi_lookup[i].tracker_list, + &ioc->free_list); + } + + /* hi-priority queue */ + INIT_LIST_HEAD(&ioc->hpr_free_list); + smid = ioc->hi_priority_smid; + for (i = 0; i < ioc->hi_priority_depth; i++, smid++) { + ioc->hpr_lookup[i].cb_idx = 0xFF; + ioc->hpr_lookup[i].smid = smid; + list_add_tail(&ioc->hpr_lookup[i].tracker_list, + &ioc->hpr_free_list); + } + + /* internal queue */ + INIT_LIST_HEAD(&ioc->internal_free_list); + smid = ioc->internal_smid; + for (i = 0; i < ioc->internal_depth; i++, smid++) { + ioc->internal_lookup[i].cb_idx = 0xFF; + ioc->internal_lookup[i].smid = smid; + list_add_tail(&ioc->internal_lookup[i].tracker_list, + &ioc->internal_free_list); + } + + /* chain pool */ + INIT_LIST_HEAD(&ioc->free_chain_list); + for (i = 0; i < ioc->chain_depth; i++) + list_add_tail(&ioc->chain_lookup[i].tracker_list, + &ioc->free_chain_list); + + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + + /* initialize Reply Free Queue */ + for (i = 0, reply_address = (u32)ioc->reply_dma ; + i < ioc->reply_free_queue_depth ; i++, reply_address += + ioc->reply_sz) + ioc->reply_free[i] = cpu_to_le32(reply_address); + + /* initialize reply queues */ + if (ioc->is_driver_loading) + _base_assign_reply_queues(ioc); + + /* initialize Reply Post Free Queue */ + reply_post_free = (long)ioc->reply_post_free; + reply_post_free_sz = ioc->reply_post_queue_depth * + sizeof(Mpi2DefaultReplyDescriptor_t); + list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { + reply_q->reply_post_host_index = 0; + reply_q->reply_post_free = (Mpi2ReplyDescriptorsUnion_t *) + reply_post_free; + for (i = 0; i < ioc->reply_post_queue_depth; i++) + reply_q->reply_post_free[i].Words = + cpu_to_le64(ULLONG_MAX); + if (!_base_is_controller_msix_enabled(ioc)) + goto skip_init_reply_post_free_queue; + reply_post_free += reply_post_free_sz; + } + skip_init_reply_post_free_queue: + + r = _base_send_ioc_init(ioc, sleep_flag); + if (r) + return r; + + /* initialize reply free host index */ + ioc->reply_free_host_index = ioc->reply_free_queue_depth - 1; + writel(ioc->reply_free_host_index, &ioc->chip->ReplyFreeHostIndex); + + /* initialize reply post host index */ + list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { + writel(reply_q->msix_index << MPI2_RPHI_MSIX_INDEX_SHIFT, + &ioc->chip->ReplyPostHostIndex); + if (!_base_is_controller_msix_enabled(ioc)) + goto skip_init_reply_post_host_index; + } + + skip_init_reply_post_host_index: + + _base_unmask_interrupts(ioc); + r = _base_event_notification(ioc, sleep_flag); + if (r) + return r; + + if (sleep_flag == CAN_SLEEP) + _base_static_config_pages(ioc); + + + if (ioc->is_driver_loading) { + ioc->wait_for_discovery_to_complete = + _base_determine_wait_on_discovery(ioc); + + return r; /* scan_start and scan_finished support */ + } + + r = _base_send_port_enable(ioc, sleep_flag); + if (r) + return r; + + return r; +} + +/** + * mpt3sas_base_free_resources - free resources controller resources + * @ioc: per adapter object + * + * Return nothing. + */ +void +mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc) +{ + struct pci_dev *pdev = ioc->pdev; + + dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + _base_mask_interrupts(ioc); + ioc->shost_recovery = 1; + _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET); + ioc->shost_recovery = 0; + _base_free_irq(ioc); + _base_disable_msix(ioc); + if (ioc->chip_phys) + iounmap(ioc->chip); + ioc->chip_phys = 0; + pci_release_selected_regions(ioc->pdev, ioc->bars); + pci_disable_pcie_error_reporting(pdev); + pci_disable_device(pdev); + return; +} + +/** + * mpt3sas_base_attach - attach controller instance + * @ioc: per adapter object + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) +{ + int r, i; + int cpu_id, last_cpu_id = 0; + + dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + /* setup cpu_msix_table */ + ioc->cpu_count = num_online_cpus(); + for_each_online_cpu(cpu_id) + last_cpu_id = cpu_id; + ioc->cpu_msix_table_sz = last_cpu_id + 1; + ioc->cpu_msix_table = kzalloc(ioc->cpu_msix_table_sz, GFP_KERNEL); + ioc->reply_queue_count = 1; + if (!ioc->cpu_msix_table) { + dfailprintk(ioc, pr_info(MPT3SAS_FMT + "allocation for cpu_msix_table failed!!!\n", + ioc->name)); + r = -ENOMEM; + goto out_free_resources; + } + + r = mpt3sas_base_map_resources(ioc); + if (r) + goto out_free_resources; + + + pci_set_drvdata(ioc->pdev, ioc->shost); + r = _base_get_ioc_facts(ioc, CAN_SLEEP); + if (r) + goto out_free_resources; + + /* + * In SAS3.0, + * SCSI_IO, SMP_PASSTHRU, SATA_PASSTHRU, Target Assist, and + * Target Status - all require the IEEE formated scatter gather + * elements. + */ + + ioc->build_sg_scmd = &_base_build_sg_scmd_ieee; + ioc->build_sg = &_base_build_sg_ieee; + ioc->build_zero_len_sge = &_base_build_zero_len_sge_ieee; + ioc->mpi25 = 1; + ioc->sge_size_ieee = sizeof(Mpi2IeeeSgeSimple64_t); + + /* + * These function pointers for other requests that don't + * the require IEEE scatter gather elements. + * + * For example Configuration Pages and SAS IOUNIT Control don't. + */ + ioc->build_sg_mpi = &_base_build_sg; + ioc->build_zero_len_sge_mpi = &_base_build_zero_len_sge; + + r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET); + if (r) + goto out_free_resources; + + ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts, + sizeof(struct mpt3sas_port_facts), GFP_KERNEL); + if (!ioc->pfacts) { + r = -ENOMEM; + goto out_free_resources; + } + + for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) { + r = _base_get_port_facts(ioc, i, CAN_SLEEP); + if (r) + goto out_free_resources; + } + + r = _base_allocate_memory_pools(ioc, CAN_SLEEP); + if (r) + goto out_free_resources; + + init_waitqueue_head(&ioc->reset_wq); + + /* allocate memory pd handle bitmask list */ + ioc->pd_handles_sz = (ioc->facts.MaxDevHandle / 8); + if (ioc->facts.MaxDevHandle % 8) + ioc->pd_handles_sz++; + ioc->pd_handles = kzalloc(ioc->pd_handles_sz, + GFP_KERNEL); + if (!ioc->pd_handles) { + r = -ENOMEM; + goto out_free_resources; + } + ioc->blocking_handles = kzalloc(ioc->pd_handles_sz, + GFP_KERNEL); + if (!ioc->blocking_handles) { + r = -ENOMEM; + goto out_free_resources; + } + + ioc->fwfault_debug = mpt3sas_fwfault_debug; + + /* base internal command bits */ + mutex_init(&ioc->base_cmds.mutex); + ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->base_cmds.status = MPT3_CMD_NOT_USED; + + /* port_enable command bits */ + ioc->port_enable_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED; + + /* transport internal command bits */ + ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->transport_cmds.status = MPT3_CMD_NOT_USED; + mutex_init(&ioc->transport_cmds.mutex); + + /* scsih internal command bits */ + ioc->scsih_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->scsih_cmds.status = MPT3_CMD_NOT_USED; + mutex_init(&ioc->scsih_cmds.mutex); + + /* task management internal command bits */ + ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->tm_cmds.status = MPT3_CMD_NOT_USED; + mutex_init(&ioc->tm_cmds.mutex); + + /* config page internal command bits */ + ioc->config_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->config_cmds.status = MPT3_CMD_NOT_USED; + mutex_init(&ioc->config_cmds.mutex); + + /* ctl module internal command bits */ + ioc->ctl_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->ctl_cmds.sense = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL); + ioc->ctl_cmds.status = MPT3_CMD_NOT_USED; + mutex_init(&ioc->ctl_cmds.mutex); + + if (!ioc->base_cmds.reply || !ioc->transport_cmds.reply || + !ioc->scsih_cmds.reply || !ioc->tm_cmds.reply || + !ioc->config_cmds.reply || !ioc->ctl_cmds.reply || + !ioc->ctl_cmds.sense) { + r = -ENOMEM; + goto out_free_resources; + } + + for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) + ioc->event_masks[i] = -1; + + /* here we enable the events we care about */ + _base_unmask_events(ioc, MPI2_EVENT_SAS_DISCOVERY); + _base_unmask_events(ioc, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE); + _base_unmask_events(ioc, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST); + _base_unmask_events(ioc, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE); + _base_unmask_events(ioc, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE); + _base_unmask_events(ioc, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST); + _base_unmask_events(ioc, MPI2_EVENT_IR_VOLUME); + _base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK); + _base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS); + _base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED); + + r = _base_make_ioc_operational(ioc, CAN_SLEEP); + if (r) + goto out_free_resources; + + return 0; + + out_free_resources: + + ioc->remove_host = 1; + + mpt3sas_base_free_resources(ioc); + _base_release_memory_pools(ioc); + pci_set_drvdata(ioc->pdev, NULL); + kfree(ioc->cpu_msix_table); + kfree(ioc->pd_handles); + kfree(ioc->blocking_handles); + kfree(ioc->tm_cmds.reply); + kfree(ioc->transport_cmds.reply); + kfree(ioc->scsih_cmds.reply); + kfree(ioc->config_cmds.reply); + kfree(ioc->base_cmds.reply); + kfree(ioc->port_enable_cmds.reply); + kfree(ioc->ctl_cmds.reply); + kfree(ioc->ctl_cmds.sense); + kfree(ioc->pfacts); + ioc->ctl_cmds.reply = NULL; + ioc->base_cmds.reply = NULL; + ioc->tm_cmds.reply = NULL; + ioc->scsih_cmds.reply = NULL; + ioc->transport_cmds.reply = NULL; + ioc->config_cmds.reply = NULL; + ioc->pfacts = NULL; + return r; +} + + +/** + * mpt3sas_base_detach - remove controller instance + * @ioc: per adapter object + * + * Return nothing. + */ +void +mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc) +{ + dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, + __func__)); + + mpt3sas_base_stop_watchdog(ioc); + mpt3sas_base_free_resources(ioc); + _base_release_memory_pools(ioc); + pci_set_drvdata(ioc->pdev, NULL); + kfree(ioc->cpu_msix_table); + kfree(ioc->pd_handles); + kfree(ioc->blocking_handles); + kfree(ioc->pfacts); + kfree(ioc->ctl_cmds.reply); + kfree(ioc->ctl_cmds.sense); + kfree(ioc->base_cmds.reply); + kfree(ioc->port_enable_cmds.reply); + kfree(ioc->tm_cmds.reply); + kfree(ioc->transport_cmds.reply); + kfree(ioc->scsih_cmds.reply); + kfree(ioc->config_cmds.reply); +} + +/** + * _base_reset_handler - reset callback handler (for base) + * @ioc: per adapter object + * @reset_phase: phase + * + * The handler for doing any required cleanup or initialization. + * + * The reset phase can be MPT3_IOC_PRE_RESET, MPT3_IOC_AFTER_RESET, + * MPT3_IOC_DONE_RESET + * + * Return nothing. + */ +static void +_base_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase) +{ + mpt3sas_scsih_reset_handler(ioc, reset_phase); + mpt3sas_ctl_reset_handler(ioc, reset_phase); + switch (reset_phase) { + case MPT3_IOC_PRE_RESET: + dtmprintk(ioc, pr_info(MPT3SAS_FMT + "%s: MPT3_IOC_PRE_RESET\n", ioc->name, __func__)); + break; + case MPT3_IOC_AFTER_RESET: + dtmprintk(ioc, pr_info(MPT3SAS_FMT + "%s: MPT3_IOC_AFTER_RESET\n", ioc->name, __func__)); + if (ioc->transport_cmds.status & MPT3_CMD_PENDING) { + ioc->transport_cmds.status |= MPT3_CMD_RESET; + mpt3sas_base_free_smid(ioc, ioc->transport_cmds.smid); + complete(&ioc->transport_cmds.done); + } + if (ioc->base_cmds.status & MPT3_CMD_PENDING) { + ioc->base_cmds.status |= MPT3_CMD_RESET; + mpt3sas_base_free_smid(ioc, ioc->base_cmds.smid); + complete(&ioc->base_cmds.done); + } + if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) { + ioc->port_enable_failed = 1; + ioc->port_enable_cmds.status |= MPT3_CMD_RESET; + mpt3sas_base_free_smid(ioc, ioc->port_enable_cmds.smid); + if (ioc->is_driver_loading) { + ioc->start_scan_failed = + MPI2_IOCSTATUS_INTERNAL_ERROR; + ioc->start_scan = 0; + ioc->port_enable_cmds.status = + MPT3_CMD_NOT_USED; + } else + complete(&ioc->port_enable_cmds.done); + } + if (ioc->config_cmds.status & MPT3_CMD_PENDING) { + ioc->config_cmds.status |= MPT3_CMD_RESET; + mpt3sas_base_free_smid(ioc, ioc->config_cmds.smid); + ioc->config_cmds.smid = USHRT_MAX; + complete(&ioc->config_cmds.done); + } + break; + case MPT3_IOC_DONE_RESET: + dtmprintk(ioc, pr_info(MPT3SAS_FMT + "%s: MPT3_IOC_DONE_RESET\n", ioc->name, __func__)); + break; + } +} + +/** + * _wait_for_commands_to_complete - reset controller + * @ioc: Pointer to MPT_ADAPTER structure + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * This function waiting(3s) for all pending commands to complete + * prior to putting controller in reset. + */ +static void +_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) +{ + u32 ioc_state; + unsigned long flags; + u16 i; + + ioc->pending_io_count = 0; + if (sleep_flag != CAN_SLEEP) + return; + + ioc_state = mpt3sas_base_get_iocstate(ioc, 0); + if ((ioc_state & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) + return; + + /* pending command count */ + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + for (i = 0; i < ioc->scsiio_depth; i++) + if (ioc->scsi_lookup[i].cb_idx != 0xFF) + ioc->pending_io_count++; + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + + if (!ioc->pending_io_count) + return; + + /* wait for pending commands to complete */ + wait_event_timeout(ioc->reset_wq, ioc->pending_io_count == 0, 10 * HZ); +} + +/** + * mpt3sas_base_hard_reset_handler - reset controller + * @ioc: Pointer to MPT_ADAPTER structure + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * @type: FORCE_BIG_HAMMER or SOFT_RESET + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag, + enum reset_type type) +{ + int r; + unsigned long flags; + u32 ioc_state; + u8 is_fault = 0, is_trigger = 0; + + dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: enter\n", ioc->name, + __func__)); + + if (ioc->pci_error_recovery) { + pr_err(MPT3SAS_FMT "%s: pci error recovery reset\n", + ioc->name, __func__); + r = 0; + goto out_unlocked; + } + + if (mpt3sas_fwfault_debug) + mpt3sas_halt_firmware(ioc); + + /* TODO - What we really should be doing is pulling + * out all the code associated with NO_SLEEP; its never used. + * That is legacy code from mpt fusion driver, ported over. + * I will leave this BUG_ON here for now till its been resolved. + */ + BUG_ON(sleep_flag == NO_SLEEP); + + /* wait for an active reset in progress to complete */ + if (!mutex_trylock(&ioc->reset_in_progress_mutex)) { + do { + ssleep(1); + } while (ioc->shost_recovery == 1); + dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name, + __func__)); + return ioc->ioc_reset_in_progress_status; + } + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + ioc->shost_recovery = 1; + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & + MPT3_DIAG_BUFFER_IS_REGISTERED) && + (!(ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & + MPT3_DIAG_BUFFER_IS_RELEASED))) { + is_trigger = 1; + ioc_state = mpt3sas_base_get_iocstate(ioc, 0); + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) + is_fault = 1; + } + _base_reset_handler(ioc, MPT3_IOC_PRE_RESET); + _wait_for_commands_to_complete(ioc, sleep_flag); + _base_mask_interrupts(ioc); + r = _base_make_ioc_ready(ioc, sleep_flag, type); + if (r) + goto out; + _base_reset_handler(ioc, MPT3_IOC_AFTER_RESET); + + /* If this hard reset is called while port enable is active, then + * there is no reason to call make_ioc_operational + */ + if (ioc->is_driver_loading && ioc->port_enable_failed) { + ioc->remove_host = 1; + r = -EFAULT; + goto out; + } + r = _base_get_ioc_facts(ioc, CAN_SLEEP); + if (r) + goto out; + r = _base_make_ioc_operational(ioc, sleep_flag); + if (!r) + _base_reset_handler(ioc, MPT3_IOC_DONE_RESET); + + out: + dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: %s\n", + ioc->name, __func__, ((r == 0) ? "SUCCESS" : "FAILED"))); + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + ioc->ioc_reset_in_progress_status = r; + ioc->shost_recovery = 0; + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + ioc->ioc_reset_count++; + mutex_unlock(&ioc->reset_in_progress_mutex); + + out_unlocked: + if ((r == 0) && is_trigger) { + if (is_fault) + mpt3sas_trigger_master(ioc, MASTER_TRIGGER_FW_FAULT); + else + mpt3sas_trigger_master(ioc, + MASTER_TRIGGER_ADAPTER_RESET); + } + dtmprintk(ioc, pr_info(MPT3SAS_FMT "%s: exit\n", ioc->name, + __func__)); + return r; +} |