summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/mvsas/mv_64xx.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/mvsas/mv_64xx.h')
-rw-r--r--drivers/scsi/mvsas/mv_64xx.h151
1 files changed, 151 insertions, 0 deletions
diff --git a/drivers/scsi/mvsas/mv_64xx.h b/drivers/scsi/mvsas/mv_64xx.h
new file mode 100644
index 00000000000..42e947d9795
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_64xx.h
@@ -0,0 +1,151 @@
+/*
+ * Marvell 88SE64xx hardware specific head file
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#ifndef _MVS64XX_REG_H_
+#define _MVS64XX_REG_H_
+
+#include <linux/types.h>
+
+#define MAX_LINK_RATE SAS_LINK_RATE_3_0_GBPS
+
+/* enhanced mode registers (BAR4) */
+enum hw_registers {
+ MVS_GBL_CTL = 0x04, /* global control */
+ MVS_GBL_INT_STAT = 0x08, /* global irq status */
+ MVS_GBL_PI = 0x0C, /* ports implemented bitmask */
+
+ MVS_PHY_CTL = 0x40, /* SOC PHY Control */
+ MVS_PORTS_IMP = 0x9C, /* SOC Port Implemented */
+
+ MVS_GBL_PORT_TYPE = 0xa0, /* port type */
+
+ MVS_CTL = 0x100, /* SAS/SATA port configuration */
+ MVS_PCS = 0x104, /* SAS/SATA port control/status */
+ MVS_CMD_LIST_LO = 0x108, /* cmd list addr */
+ MVS_CMD_LIST_HI = 0x10C,
+ MVS_RX_FIS_LO = 0x110, /* RX FIS list addr */
+ MVS_RX_FIS_HI = 0x114,
+
+ MVS_TX_CFG = 0x120, /* TX configuration */
+ MVS_TX_LO = 0x124, /* TX (delivery) ring addr */
+ MVS_TX_HI = 0x128,
+
+ MVS_TX_PROD_IDX = 0x12C, /* TX producer pointer */
+ MVS_TX_CONS_IDX = 0x130, /* TX consumer pointer (RO) */
+ MVS_RX_CFG = 0x134, /* RX configuration */
+ MVS_RX_LO = 0x138, /* RX (completion) ring addr */
+ MVS_RX_HI = 0x13C,
+ MVS_RX_CONS_IDX = 0x140, /* RX consumer pointer (RO) */
+
+ MVS_INT_COAL = 0x148, /* Int coalescing config */
+ MVS_INT_COAL_TMOUT = 0x14C, /* Int coalescing timeout */
+ MVS_INT_STAT = 0x150, /* Central int status */
+ MVS_INT_MASK = 0x154, /* Central int enable */
+ MVS_INT_STAT_SRS_0 = 0x158, /* SATA register set status */
+ MVS_INT_MASK_SRS_0 = 0x15C,
+
+ /* ports 1-3 follow after this */
+ MVS_P0_INT_STAT = 0x160, /* port0 interrupt status */
+ MVS_P0_INT_MASK = 0x164, /* port0 interrupt mask */
+ /* ports 5-7 follow after this */
+ MVS_P4_INT_STAT = 0x200, /* Port4 interrupt status */
+ MVS_P4_INT_MASK = 0x204, /* Port4 interrupt enable mask */
+
+ /* ports 1-3 follow after this */
+ MVS_P0_SER_CTLSTAT = 0x180, /* port0 serial control/status */
+ /* ports 5-7 follow after this */
+ MVS_P4_SER_CTLSTAT = 0x220, /* port4 serial control/status */
+
+ MVS_CMD_ADDR = 0x1B8, /* Command register port (addr) */
+ MVS_CMD_DATA = 0x1BC, /* Command register port (data) */
+
+ /* ports 1-3 follow after this */
+ MVS_P0_CFG_ADDR = 0x1C0, /* port0 phy register address */
+ MVS_P0_CFG_DATA = 0x1C4, /* port0 phy register data */
+ /* ports 5-7 follow after this */
+ MVS_P4_CFG_ADDR = 0x230, /* Port4 config address */
+ MVS_P4_CFG_DATA = 0x234, /* Port4 config data */
+
+ /* ports 1-3 follow after this */
+ MVS_P0_VSR_ADDR = 0x1E0, /* port0 VSR address */
+ MVS_P0_VSR_DATA = 0x1E4, /* port0 VSR data */
+ /* ports 5-7 follow after this */
+ MVS_P4_VSR_ADDR = 0x250, /* port4 VSR addr */
+ MVS_P4_VSR_DATA = 0x254, /* port4 VSR data */
+};
+
+enum pci_cfg_registers {
+ PCR_PHY_CTL = 0x40,
+ PCR_PHY_CTL2 = 0x90,
+ PCR_DEV_CTRL = 0xE8,
+ PCR_LINK_STAT = 0xF2,
+};
+
+/* SAS/SATA Vendor Specific Port Registers */
+enum sas_sata_vsp_regs {
+ VSR_PHY_STAT = 0x00, /* Phy Status */
+ VSR_PHY_MODE1 = 0x01, /* phy tx */
+ VSR_PHY_MODE2 = 0x02, /* tx scc */
+ VSR_PHY_MODE3 = 0x03, /* pll */
+ VSR_PHY_MODE4 = 0x04, /* VCO */
+ VSR_PHY_MODE5 = 0x05, /* Rx */
+ VSR_PHY_MODE6 = 0x06, /* CDR */
+ VSR_PHY_MODE7 = 0x07, /* Impedance */
+ VSR_PHY_MODE8 = 0x08, /* Voltage */
+ VSR_PHY_MODE9 = 0x09, /* Test */
+ VSR_PHY_MODE10 = 0x0A, /* Power */
+ VSR_PHY_MODE11 = 0x0B, /* Phy Mode */
+ VSR_PHY_VS0 = 0x0C, /* Vednor Specific 0 */
+ VSR_PHY_VS1 = 0x0D, /* Vednor Specific 1 */
+};
+
+enum chip_register_bits {
+ PHY_MIN_SPP_PHYS_LINK_RATE_MASK = (0xF << 8),
+ PHY_MAX_SPP_PHYS_LINK_RATE_MASK = (0xF << 12),
+ PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET = (16),
+ PHY_NEG_SPP_PHYS_LINK_RATE_MASK =
+ (0xF << PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET),
+};
+
+#define MAX_SG_ENTRY 64
+
+struct mvs_prd {
+ __le64 addr; /* 64-bit buffer address */
+ __le32 reserved;
+ __le32 len; /* 16-bit length */
+};
+
+#define SPI_CTRL_REG 0xc0
+#define SPI_CTRL_VENDOR_ENABLE (1U<<29)
+#define SPI_CTRL_SPIRDY (1U<<22)
+#define SPI_CTRL_SPISTART (1U<<20)
+
+#define SPI_CMD_REG 0xc4
+#define SPI_DATA_REG 0xc8
+
+#define SPI_CTRL_REG_64XX 0x10
+#define SPI_CMD_REG_64XX 0x14
+#define SPI_DATA_REG_64XX 0x18
+
+#endif