diff options
Diffstat (limited to 'drivers/scsi/pm8001/pm8001_init.c')
| -rw-r--r-- | drivers/scsi/pm8001/pm8001_init.c | 65 |
1 files changed, 64 insertions, 1 deletions
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index f7c189606b8..662bf13c42f 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -54,6 +54,9 @@ static const struct pm8001_chip_info pm8001_chips[] = { [chip_8009] = {1, 8, &pm8001_80xx_dispatch,}, [chip_8018] = {0, 16, &pm8001_80xx_dispatch,}, [chip_8019] = {1, 16, &pm8001_80xx_dispatch,}, + [chip_8074] = {0, 8, &pm8001_80xx_dispatch,}, + [chip_8076] = {0, 16, &pm8001_80xx_dispatch,}, + [chip_8077] = {0, 16, &pm8001_80xx_dispatch,}, }; static int pm8001_id; @@ -344,6 +347,10 @@ static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha, /* Memory region for fw flash */ pm8001_ha->memoryMap.region[FW_FLASH].total_len = 4096; + pm8001_ha->memoryMap.region[FORENSIC_MEM].num_elements = 1; + pm8001_ha->memoryMap.region[FORENSIC_MEM].total_len = 0x10000; + pm8001_ha->memoryMap.region[FORENSIC_MEM].element_size = 0x10000; + pm8001_ha->memoryMap.region[FORENSIC_MEM].alignment = 0x10000; for (i = 0; i < USI_MAX_MEMCNT; i++) { if (pm8001_mem_alloc(pm8001_ha->pdev, &pm8001_ha->memoryMap.region[i].virt_ptr, @@ -664,6 +671,31 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha) #endif } +/* + * pm8001_get_phy_settings_info : Read phy setting values. + * @pm8001_ha : our hba. + */ +void pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha) +{ + +#ifdef PM8001_READ_VPD + /*OPTION ROM FLASH read for the SPC cards */ + DECLARE_COMPLETION_ONSTACK(completion); + struct pm8001_ioctl_payload payload; + + pm8001_ha->nvmd_completion = &completion; + /* SAS ADDRESS read from flash / EEPROM */ + payload.minor_function = 6; + payload.offset = 0; + payload.length = 4096; + payload.func_specific = kzalloc(4096, GFP_KERNEL); + /* Read phy setting values from flash */ + PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload); + wait_for_completion(&completion); + pm8001_set_phy_profile(pm8001_ha, sizeof(u8), payload.func_specific); +#endif +} + #ifdef PM8001_USE_MSIX /** * pm8001_setup_msix - enable MSI-X interrupt @@ -844,6 +876,10 @@ static int pm8001_pci_probe(struct pci_dev *pdev, } pm8001_init_sas_add(pm8001_ha); + /* phy setting support for motherboard controller */ + if (pdev->subsystem_vendor != PCI_VENDOR_ID_ADAPTEC2 && + pdev->subsystem_vendor != 0) + pm8001_get_phy_settings_info(pm8001_ha); pm8001_post_sas_ha_init(shost, chip); rc = sas_register_ha(SHOST_TO_SAS_HA(shost)); if (rc) @@ -1037,6 +1073,12 @@ static struct pci_device_id pm8001_pci_table[] = { { PCI_VDEVICE(ADAPTEC2, 0x8009), chip_8009 }, { PCI_VDEVICE(PMC_Sierra, 0x8019), chip_8019 }, { PCI_VDEVICE(ADAPTEC2, 0x8019), chip_8019 }, + { PCI_VDEVICE(PMC_Sierra, 0x8074), chip_8074 }, + { PCI_VDEVICE(ADAPTEC2, 0x8074), chip_8074 }, + { PCI_VDEVICE(PMC_Sierra, 0x8076), chip_8076 }, + { PCI_VDEVICE(ADAPTEC2, 0x8076), chip_8076 }, + { PCI_VDEVICE(PMC_Sierra, 0x8077), chip_8077 }, + { PCI_VDEVICE(ADAPTEC2, 0x8077), chip_8077 }, { PCI_VENDOR_ID_ADAPTEC2, 0x8081, PCI_VENDOR_ID_ADAPTEC2, 0x0400, 0, 0, chip_8001 }, { PCI_VENDOR_ID_ADAPTEC2, 0x8081, @@ -1057,6 +1099,24 @@ static struct pci_device_id pm8001_pci_table[] = { PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8019 }, { PCI_VENDOR_ID_ADAPTEC2, 0x8089, PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8019 }, + { PCI_VENDOR_ID_ADAPTEC2, 0x8074, + PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8074 }, + { PCI_VENDOR_ID_ADAPTEC2, 0x8076, + PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8076 }, + { PCI_VENDOR_ID_ADAPTEC2, 0x8077, + PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8077 }, + { PCI_VENDOR_ID_ADAPTEC2, 0x8074, + PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8074 }, + { PCI_VENDOR_ID_ADAPTEC2, 0x8076, + PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8076 }, + { PCI_VENDOR_ID_ADAPTEC2, 0x8077, + PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8077 }, + { PCI_VENDOR_ID_ADAPTEC2, 0x8076, + PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8076 }, + { PCI_VENDOR_ID_ADAPTEC2, 0x8077, + PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8077 }, + { PCI_VENDOR_ID_ADAPTEC2, 0x8074, + PCI_VENDOR_ID_ADAPTEC2, 0x0404, 0, 0, chip_8074 }, {} /* terminate list */ }; @@ -1108,8 +1168,11 @@ module_init(pm8001_init); module_exit(pm8001_exit); MODULE_AUTHOR("Jack Wang <jack_wang@usish.com>"); +MODULE_AUTHOR("Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>"); +MODULE_AUTHOR("Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com>"); MODULE_DESCRIPTION( - "PMC-Sierra PM8001/8081/8088/8089 SAS/SATA controller driver"); + "PMC-Sierra PM8001/8081/8088/8089/8074/8076/8077 " + "SAS/SATA controller driver"); MODULE_VERSION(DRV_VERSION); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, pm8001_pci_table); |