diff options
Diffstat (limited to 'drivers/scsi/pm8001/pm80xx_hwi.c')
| -rw-r--r-- | drivers/scsi/pm8001/pm80xx_hwi.c | 262 |
1 files changed, 250 insertions, 12 deletions
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 7dee46716a5..f0dbe79b049 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -270,6 +270,9 @@ static void init_default_table_values(struct pm8001_hba_info *pm8001_ha) pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_severity = 0x01; pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt = 0x01; + /* Disable end to end CRC checking */ + pm8001_ha->main_cfg_tbl.pm80xx_tbl.crc_core_dump = (0x1 << 16); + for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) { pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt = PM8001_MPI_QUEUE | (64 << 16) | (0x00<<30); @@ -353,6 +356,8 @@ static void update_main_config_table(struct pm8001_hba_info *pm8001_ha) pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_severity); pm8001_mw32(address, MAIN_FATAL_ERROR_INTERRUPT, pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt); + pm8001_mw32(address, MAIN_EVENT_CRC_CHECK, + pm8001_ha->main_cfg_tbl.pm80xx_tbl.crc_core_dump); /* SPCv specific */ pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping &= 0xCFFFFFFF; @@ -1026,6 +1031,123 @@ pm80xx_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec) pm80xx_chip_intx_interrupt_disable(pm8001_ha); } +static void pm80xx_send_abort_all(struct pm8001_hba_info *pm8001_ha, + struct pm8001_device *pm8001_ha_dev) +{ + int res; + u32 ccb_tag; + struct pm8001_ccb_info *ccb; + struct sas_task *task = NULL; + struct task_abort_req task_abort; + struct inbound_queue_table *circularQ; + u32 opc = OPC_INB_SATA_ABORT; + int ret; + + if (!pm8001_ha_dev) { + PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("dev is null\n")); + return; + } + + task = sas_alloc_slow_task(GFP_ATOMIC); + + if (!task) { + PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("cannot " + "allocate task\n")); + return; + } + + task->task_done = pm8001_task_done; + + res = pm8001_tag_alloc(pm8001_ha, &ccb_tag); + if (res) + return; + + ccb = &pm8001_ha->ccb_info[ccb_tag]; + ccb->device = pm8001_ha_dev; + ccb->ccb_tag = ccb_tag; + ccb->task = task; + + circularQ = &pm8001_ha->inbnd_q_tbl[0]; + + memset(&task_abort, 0, sizeof(task_abort)); + task_abort.abort_all = cpu_to_le32(1); + task_abort.device_id = cpu_to_le32(pm8001_ha_dev->device_id); + task_abort.tag = cpu_to_le32(ccb_tag); + + ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &task_abort, 0); + +} + +static void pm80xx_send_read_log(struct pm8001_hba_info *pm8001_ha, + struct pm8001_device *pm8001_ha_dev) +{ + struct sata_start_req sata_cmd; + int res; + u32 ccb_tag; + struct pm8001_ccb_info *ccb; + struct sas_task *task = NULL; + struct host_to_dev_fis fis; + struct domain_device *dev; + struct inbound_queue_table *circularQ; + u32 opc = OPC_INB_SATA_HOST_OPSTART; + + task = sas_alloc_slow_task(GFP_ATOMIC); + + if (!task) { + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("cannot allocate task !!!\n")); + return; + } + task->task_done = pm8001_task_done; + + res = pm8001_tag_alloc(pm8001_ha, &ccb_tag); + if (res) { + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("cannot allocate tag !!!\n")); + return; + } + + /* allocate domain device by ourselves as libsas + * is not going to provide any + */ + dev = kzalloc(sizeof(struct domain_device), GFP_ATOMIC); + if (!dev) { + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("Domain device cannot be allocated\n")); + sas_free_task(task); + return; + } else { + task->dev = dev; + task->dev->lldd_dev = pm8001_ha_dev; + } + + ccb = &pm8001_ha->ccb_info[ccb_tag]; + ccb->device = pm8001_ha_dev; + ccb->ccb_tag = ccb_tag; + ccb->task = task; + pm8001_ha_dev->id |= NCQ_READ_LOG_FLAG; + pm8001_ha_dev->id |= NCQ_2ND_RLE_FLAG; + + memset(&sata_cmd, 0, sizeof(sata_cmd)); + circularQ = &pm8001_ha->inbnd_q_tbl[0]; + + /* construct read log FIS */ + memset(&fis, 0, sizeof(struct host_to_dev_fis)); + fis.fis_type = 0x27; + fis.flags = 0x80; + fis.command = ATA_CMD_READ_LOG_EXT; + fis.lbal = 0x10; + fis.sector_count = 0x1; + + sata_cmd.tag = cpu_to_le32(ccb_tag); + sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id); + sata_cmd.ncqtag_atap_dir_m_dad |= ((0x1 << 7) | (0x5 << 9)); + memcpy(&sata_cmd.sata_fis, &fis, sizeof(struct host_to_dev_fis)); + + res = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd, 0); + +} + /** * mpi_ssp_completion- process the event that FW response to the SSP request. * @pm8001_ha: our hba card information @@ -1480,22 +1602,50 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) struct ata_task_resp *resp ; u32 *sata_resp; struct pm8001_device *pm8001_dev; - unsigned long flags = 0; + unsigned long flags; psataPayload = (struct sata_completion_resp *)(piomb + 4); status = le32_to_cpu(psataPayload->status); tag = le32_to_cpu(psataPayload->tag); + if (!tag) { + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("tag null\n")); + return; + } ccb = &pm8001_ha->ccb_info[tag]; param = le32_to_cpu(psataPayload->param); - t = ccb->task; + if (ccb) { + t = ccb->task; + pm8001_dev = ccb->device; + } else { + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("ccb null\n")); + return; + } + + if (t) { + if (t->dev && (t->dev->lldd_dev)) + pm8001_dev = t->dev->lldd_dev; + } else { + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("task null\n")); + return; + } + + if ((pm8001_dev && !(pm8001_dev->id & NCQ_READ_LOG_FLAG)) + && unlikely(!t || !t->lldd_task || !t->dev)) { + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("task or dev null\n")); + return; + } + ts = &t->task_status; - pm8001_dev = ccb->device; - if (status) + if (!ts) { PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("sata IO status 0x%x\n", status)); - if (unlikely(!t || !t->lldd_task || !t->dev)) + pm8001_printk("ts null\n")); return; + } switch (status) { case IO_SUCCESS: @@ -1503,6 +1653,19 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) if (param == 0) { ts->resp = SAS_TASK_COMPLETE; ts->stat = SAM_STAT_GOOD; + /* check if response is for SEND READ LOG */ + if (pm8001_dev && + (pm8001_dev->id & NCQ_READ_LOG_FLAG)) { + /* set new bit for abort_all */ + pm8001_dev->id |= NCQ_ABORT_ALL_FLAG; + /* clear bit for read log */ + pm8001_dev->id = pm8001_dev->id & 0x7FFFFFFF; + pm80xx_send_abort_all(pm8001_ha, pm8001_dev); + /* Free the tag */ + pm8001_tag_free(pm8001_ha, tag); + sas_free_task(t); + return; + } } else { u8 len; ts->resp = SAS_TASK_COMPLETE; @@ -1807,16 +1970,39 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) u32 event = le32_to_cpu(psataPayload->event); u32 tag = le32_to_cpu(psataPayload->tag); u32 port_id = le32_to_cpu(psataPayload->port_id); - unsigned long flags = 0; + u32 dev_id = le32_to_cpu(psataPayload->device_id); + unsigned long flags; ccb = &pm8001_ha->ccb_info[tag]; - t = ccb->task; - pm8001_dev = ccb->device; + + if (ccb) { + t = ccb->task; + pm8001_dev = ccb->device; + } else { + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("No CCB !!!. returning\n")); + return; + } if (event) PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("sata IO status 0x%x\n", event)); - if (unlikely(!t || !t->lldd_task || !t->dev)) + pm8001_printk("SATA EVENT 0x%x\n", event)); + + /* Check if this is NCQ error */ + if (event == IO_XFER_ERROR_ABORTED_NCQ_MODE) { + /* find device using device id */ + pm8001_dev = pm8001_find_dev(pm8001_ha, dev_id); + /* send read log extension */ + if (pm8001_dev) + pm80xx_send_read_log(pm8001_ha, pm8001_dev); + return; + } + + if (unlikely(!t || !t->lldd_task || !t->dev)) { + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("task or dev null\n")); return; + } + ts = &t->task_status; PM8001_IO_DBG(pm8001_ha, pm8001_printk("port_id:0x%x, tag:0x%x, event:0x%x\n", @@ -3414,6 +3600,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, u32 ATAP = 0x0; u32 dir; struct inbound_queue_table *circularQ; + unsigned long flags; u32 opc = OPC_INB_SATA_HOST_OPSTART; memset(&sata_cmd, 0, sizeof(sata_cmd)); circularQ = &pm8001_ha->inbnd_q_tbl[inb++]; @@ -3438,8 +3625,10 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, PM8001_IO_DBG(pm8001_ha, pm8001_printk("FPDMA\n")); } } - if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) + if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) { + task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3); ncg_tag = hdr_tag; + } dir = data_dir_flags[task->data_dir] << 8; sata_cmd.tag = cpu_to_le32(tag); sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id); @@ -3547,6 +3736,55 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, (task->ata_task.atapi_packet[14] << 16) | (task->ata_task.atapi_packet[15] << 24))); } + + /* Check for read log for failed drive and return */ + if (sata_cmd.sata_fis.command == 0x2f) { + if (pm8001_ha_dev && ((pm8001_ha_dev->id & NCQ_READ_LOG_FLAG) || + (pm8001_ha_dev->id & NCQ_ABORT_ALL_FLAG) || + (pm8001_ha_dev->id & NCQ_2ND_RLE_FLAG))) { + struct task_status_struct *ts; + + pm8001_ha_dev->id &= 0xDFFFFFFF; + ts = &task->task_status; + + spin_lock_irqsave(&task->task_state_lock, flags); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAM_STAT_GOOD; + task->task_state_flags &= ~SAS_TASK_STATE_PENDING; + task->task_state_flags &= ~SAS_TASK_AT_INITIATOR; + task->task_state_flags |= SAS_TASK_STATE_DONE; + if (unlikely((task->task_state_flags & + SAS_TASK_STATE_ABORTED))) { + spin_unlock_irqrestore(&task->task_state_lock, + flags); + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("task 0x%p resp 0x%x " + " stat 0x%x but aborted by upper layer " + "\n", task, ts->resp, ts->stat)); + pm8001_ccb_task_free(pm8001_ha, task, ccb, tag); + return 0; + } else if (task->uldd_task) { + spin_unlock_irqrestore(&task->task_state_lock, + flags); + pm8001_ccb_task_free(pm8001_ha, task, ccb, tag); + mb();/* ditto */ + spin_unlock_irq(&pm8001_ha->lock); + task->task_done(task); + spin_lock_irq(&pm8001_ha->lock); + return 0; + } else if (!task->uldd_task) { + spin_unlock_irqrestore(&task->task_state_lock, + flags); + pm8001_ccb_task_free(pm8001_ha, task, ccb, tag); + mb();/*ditto*/ + spin_unlock_irq(&pm8001_ha->lock); + task->task_done(task); + spin_lock_irq(&pm8001_ha->lock); + return 0; + } + } + } + ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd, outb++); |