4 files changed, 6 insertions, 2 deletions
diff --git a/drivers/scsi/pm8001/pm8001_ctl.c b/drivers/scsi/pm8001/pm8001_ctl.c
index 14b13acae6d..45bc197bc22 100644
--- a/drivers/scsi/pm8001/pm8001_ctl.c
+++ b/drivers/scsi/pm8001/pm8001_ctl.c
@@ -38,6 +38,7 @@
  *
  */
 #include <linux/firmware.h>
+#include <linux/slab.h>
 #include "pm8001_sas.h"
 #include "pm8001_ctl.h"
 
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 9b44c6f1b10..909c00ec044 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -37,6 +37,7 @@
  * POSSIBILITY OF SUCH DAMAGES.
  *
  */
+ #include <linux/slab.h>
  #include "pm8001_sas.h"
  #include "pm8001_hwi.h"
  #include "pm8001_chips.h"
@@ -2924,7 +2925,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		break;
 	default:
 		PM8001_MSG_DBG(pm8001_ha,
-			pm8001_printk("unkown device type(%x)\n", deviceType));
+			pm8001_printk("unknown device type(%x)\n", deviceType));
 		break;
 	}
 	phy->phy_type |= PORT_TYPE_SAS;
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index f80c1da8f6c..f8c86b28f03 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -38,6 +38,7 @@
  *
  */
 
+#include <linux/slab.h>
 #include "pm8001_sas.h"
 #include "pm8001_chips.h"
 
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 7f9c83a7639..bff4f5139b9 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -38,6 +38,7 @@
  *
  */
 
+#include <linux/slab.h>
 #include "pm8001_sas.h"
 
 /**
@@ -600,7 +601,7 @@ static void pm8001_free_dev(struct pm8001_device *pm8001_dev)
   * by the command "OPC_INB_REG_DEV", after that the HBA will assign a
   * device ID(according to device's sas address) and returned it to LLDD. From
   * now on, we communicate with HBA FW with the device ID which HBA assigned
-  * rather than sas address. it is the neccessary step for our HBA but it is
+  * rather than sas address. it is the necessary step for our HBA but it is
   * the optional for other HBA driver.
   */
 static int pm8001_dev_found_notify(struct domain_device *dev)