summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla2xxx/qla_def.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_def.h')
-rw-r--r--drivers/scsi/qla2xxx/qla_def.h44
1 files changed, 42 insertions, 2 deletions
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index bad066e5772..b31a03bbd14 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -29,6 +29,7 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_transport_fc.h>
#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
#if defined(CONFIG_SCSI_QLA21XX) || defined(CONFIG_SCSI_QLA21XX_MODULE)
@@ -181,6 +182,13 @@
#define WRT_REG_DWORD(addr, data) writel(data,addr)
/*
+ * The ISP2312 v2 chip cannot access the FLASH/GPIO registers via MMIO in an
+ * 133Mhz slot.
+ */
+#define RD_REG_WORD_PIO(addr) (inw((unsigned long)addr))
+#define WRT_REG_WORD_PIO(addr, data) (outw(data,(unsigned long)addr))
+
+/*
* Fibre Channel device definitions.
*/
#define WWN_SIZE 8 /* Size of WWPN, WWN & WWNN */
@@ -432,6 +440,9 @@ struct device_reg_2xxx {
#define GPIO_LED_GREEN_ON_AMBER_OFF 0x0040
#define GPIO_LED_GREEN_OFF_AMBER_ON 0x0080
#define GPIO_LED_GREEN_ON_AMBER_ON 0x00C0
+#define GPIO_LED_ALL_OFF 0x0000
+#define GPIO_LED_RED_ON_OTHER_OFF 0x0001 /* isp2322 */
+#define GPIO_LED_RGA_ON 0x00C1 /* isp2322: red green amber */
union {
struct {
@@ -2199,6 +2210,15 @@ struct isp_operations {
void (*fw_dump) (struct scsi_qla_host *, int);
void (*ascii_fw_dump) (struct scsi_qla_host *);
+
+ int (*beacon_on) (struct scsi_qla_host *);
+ int (*beacon_off) (struct scsi_qla_host *);
+ void (*beacon_blink) (struct scsi_qla_host *);
+
+ uint8_t * (*read_optrom) (struct scsi_qla_host *, uint8_t *,
+ uint32_t, uint32_t);
+ int (*write_optrom) (struct scsi_qla_host *, uint8_t *, uint32_t,
+ uint32_t);
};
/*
@@ -2331,6 +2351,10 @@ typedef struct scsi_qla_host {
uint16_t min_external_loopid; /* First external loop Id */
uint16_t link_data_rate; /* F/W operating speed */
+#define LDR_1GB 0
+#define LDR_2GB 1
+#define LDR_4GB 3
+#define LDR_UNKNOWN 0xFFFF
uint8_t current_topology;
uint8_t prev_topology;
@@ -2486,12 +2510,26 @@ typedef struct scsi_qla_host {
uint8_t *port_name;
uint32_t isp_abort_cnt;
+ /* Option ROM information. */
+ char *optrom_buffer;
+ uint32_t optrom_size;
+ int optrom_state;
+#define QLA_SWAITING 0
+#define QLA_SREADING 1
+#define QLA_SWRITING 2
+
/* Needed for BEACON */
uint16_t beacon_blink_led;
- uint16_t beacon_green_on;
+ uint8_t beacon_color_state;
+#define QLA_LED_GRN_ON 0x01
+#define QLA_LED_YLW_ON 0x02
+#define QLA_LED_ABR_ON 0x04
+#define QLA_LED_ALL_ON 0x07 /* yellow, green, amber. */
+ /* ISP2322: red, green, amber. */
uint16_t zio_mode;
uint16_t zio_timer;
+ struct fc_host_statistics fc_host_stat;
} scsi_qla_host_t;
@@ -2557,7 +2595,9 @@ struct _qla2x00stats {
/*
* Flash support definitions
*/
-#define FLASH_IMAGE_SIZE 131072
+#define OPTROM_SIZE_2300 0x20000
+#define OPTROM_SIZE_2322 0x100000
+#define OPTROM_SIZE_24XX 0x100000
#include "qla_gbl.h"
#include "qla_dbg.h"