diff options
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_init.c')
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_init.c | 53 |
1 files changed, 14 insertions, 39 deletions
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 38aeb54cd9d..e2184412617 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2013 QLogic Corporation + * Copyright (c) 2003-2014 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ @@ -1476,6 +1476,7 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *vha) } ha->fw_dumped = 0; + ha->fw_dump_cap_flags = 0; dump_size = fixed_size = mem_size = eft_size = fce_size = mq_size = 0; req_q_size = rsp_q_size = 0; @@ -2061,6 +2062,10 @@ qla24xx_config_rings(struct scsi_qla_host *vha) icb->atio_q_address[0] = cpu_to_le32(LSD(ha->tgt.atio_dma)); icb->atio_q_address[1] = cpu_to_le32(MSD(ha->tgt.atio_dma)); + if (IS_SHADOW_REG_CAPABLE(ha)) + icb->firmware_options_2 |= + __constant_cpu_to_le32(BIT_30|BIT_29); + if (ha->mqenable || IS_QLA83XX(ha) || IS_QLA27XX(ha)) { icb->qos = __constant_cpu_to_le16(QLA_DEFAULT_QUE_QOS); icb->rid = __constant_cpu_to_le16(rid); @@ -2138,6 +2143,8 @@ qla2x00_init_rings(scsi_qla_host_t *vha) req = ha->req_q_map[que]; if (!req) continue; + req->out_ptr = (void *)(req->ring + req->length); + *req->out_ptr = 0; for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) req->outstanding_cmds[cnt] = NULL; @@ -2153,6 +2160,8 @@ qla2x00_init_rings(scsi_qla_host_t *vha) rsp = ha->rsp_q_map[que]; if (!rsp) continue; + rsp->in_ptr = (void *)(rsp->ring + rsp->length); + *rsp->in_ptr = 0; /* Initialize response queue entries */ if (IS_QLAFX00(ha)) qlafx00_init_response_q_entries(rsp); @@ -3406,7 +3415,7 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha) fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa); - fcport->loop_id = FC_NO_LOOP_ID; + qla2x00_clear_loop_id(fcport); } } } @@ -4727,7 +4736,6 @@ static int qla2x00_restart_isp(scsi_qla_host_t *vha) { int status = 0; - uint32_t wait_time; struct qla_hw_data *ha = vha->hw; struct req_que *req = ha->req_q_map[0]; struct rsp_que *rsp = ha->rsp_q_map[0]; @@ -4744,14 +4752,12 @@ qla2x00_restart_isp(scsi_qla_host_t *vha) if (!status && !(status = qla2x00_init_rings(vha))) { clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags); ha->flags.chip_reset_done = 1; + /* Initialize the queues in use */ qla25xx_init_queues(ha); status = qla2x00_fw_ready(vha); if (!status) { - ql_dbg(ql_dbg_taskm, vha, 0x8031, - "Start configure loop status = %d.\n", status); - /* Issue a marker after FW becomes ready. */ qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL); @@ -4766,24 +4772,12 @@ qla2x00_restart_isp(scsi_qla_host_t *vha) qlt_24xx_process_atio_queue(vha); spin_unlock_irqrestore(&ha->hardware_lock, flags); - /* Wait at most MAX_TARGET RSCNs for a stable link. */ - wait_time = 256; - do { - clear_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); - qla2x00_configure_loop(vha); - wait_time--; - } while (!atomic_read(&vha->loop_down_timer) && - !(test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) - && wait_time && (test_bit(LOOP_RESYNC_NEEDED, - &vha->dpc_flags))); + set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); } /* if no cable then assume it's good */ if ((vha->device_flags & DFLG_NO_CABLE)) status = 0; - - ql_dbg(ql_dbg_taskm, vha, 0x8032, - "Configure loop done, status = 0x%x.\n", status); } return (status); } @@ -6130,7 +6124,6 @@ int qla82xx_restart_isp(scsi_qla_host_t *vha) { int status, rval; - uint32_t wait_time; struct qla_hw_data *ha = vha->hw; struct req_que *req = ha->req_q_map[0]; struct rsp_que *rsp = ha->rsp_q_map[0]; @@ -6144,31 +6137,15 @@ qla82xx_restart_isp(scsi_qla_host_t *vha) status = qla2x00_fw_ready(vha); if (!status) { - ql_log(ql_log_info, vha, 0x803c, - "Start configure loop, status =%d.\n", status); - /* Issue a marker after FW becomes ready. */ qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL); - vha->flags.online = 1; - /* Wait at most MAX_TARGET RSCNs for a stable link. */ - wait_time = 256; - do { - clear_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); - qla2x00_configure_loop(vha); - wait_time--; - } while (!atomic_read(&vha->loop_down_timer) && - !(test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) && - wait_time && - (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))); + set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); } /* if no cable then assume it's good */ if ((vha->device_flags & DFLG_NO_CABLE)) status = 0; - - ql_log(ql_log_info, vha, 0x8000, - "Configure loop done, status = 0x%x.\n", status); } if (!status) { @@ -6182,8 +6159,6 @@ qla82xx_restart_isp(scsi_qla_host_t *vha) vha->marker_needed = 1; } - vha->flags.online = 1; - ha->isp_ops->enable_intrs(ha); ha->isp_abort_cnt = 0; |