diff options
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_isr.c')
-rw-r--r-- | drivers/scsi/qla2xxx/qla_isr.c | 55 |
1 files changed, 37 insertions, 18 deletions
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 0ba4c8d3787..b8f226ae263 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -143,7 +143,7 @@ qla2300_intr_handler(int irq, void *dev_id) WRT_REG_WORD(®->hccr, HCCR_RESET_RISC); RD_REG_WORD(®->hccr); - ha->isp_ops.fw_dump(ha, 1); + ha->isp_ops->fw_dump(ha, 1); set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); break; } else if ((stat & HSR_RISC_INT) == 0) @@ -247,7 +247,7 @@ void qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) { #define LS_UNKNOWN 2 - static char *link_speeds[5] = { "1", "2", "?", "4", "10" }; + static char *link_speeds[5] = { "1", "2", "?", "4", "8" }; char *link_speed; uint16_t handle_cnt; uint16_t cnt; @@ -334,9 +334,9 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) "ISP System Error - mbx1=%xh mbx2=%xh mbx3=%xh.\n", mb[1], mb[2], mb[3]); - ha->isp_ops.fw_dump(ha, 1); + ha->isp_ops->fw_dump(ha, 1); - if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) { + if (IS_FWI2_CAPABLE(ha)) { if (mb[1] == 0 && mb[2] == 0) { qla_printk(KERN_ERR, ha, "Unrecoverable Hardware Error: adapter " @@ -601,7 +601,7 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) "scsi(%ld): [R|Z]IO update completion.\n", ha->host_no)); - if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) + if (IS_FWI2_CAPABLE(ha)) qla24xx_process_response_queue(ha); else qla2x00_process_response_queue(ha); @@ -823,7 +823,7 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) sts = (sts_entry_t *) pkt; sts24 = (struct sts_entry_24xx *) pkt; - if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) { + if (IS_FWI2_CAPABLE(ha)) { comp_status = le16_to_cpu(sts24->comp_status); scsi_status = le16_to_cpu(sts24->scsi_status) & SS_MASK; } else { @@ -872,7 +872,7 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) fcport = sp->fcport; sense_len = rsp_info_len = resid_len = fw_resid_len = 0; - if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) { + if (IS_FWI2_CAPABLE(ha)) { sense_len = le32_to_cpu(sts24->sense_len); rsp_info_len = le32_to_cpu(sts24->rsp_data_len); resid_len = le32_to_cpu(sts24->rsp_residual_count); @@ -891,7 +891,7 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) /* Check for any FCP transport errors. */ if (scsi_status & SS_RESPONSE_INFO_LEN_VALID) { /* Sense data lies beyond any FCP RESPONSE data. */ - if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) + if (IS_FWI2_CAPABLE(ha)) sense_data += rsp_info_len; if (rsp_info_len > 3 && rsp_info[3]) { DEBUG2(printk("scsi(%ld:%d:%d:%d) FCP I/O protocol " @@ -990,7 +990,7 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) case CS_DATA_UNDERRUN: resid = resid_len; /* Use F/W calculated residual length. */ - if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) + if (IS_FWI2_CAPABLE(ha)) resid = fw_resid_len; if (scsi_status & SS_RESIDUAL_UNDER) { @@ -1062,6 +1062,25 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) cp->device->id, cp->device->lun, cp, cp->serial_number)); + /* + * In case of a Underrun condition, set both the lscsi + * status and the completion status to appropriate + * values. + */ + if (resid && + ((unsigned)(cp->request_bufflen - resid) < + cp->underflow)) { + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d:%d): Mid-layer underflow " + "detected (%x of %x bytes)...returning " + "error status.\n", ha->host_no, + cp->device->channel, cp->device->id, + cp->device->lun, resid, + cp->request_bufflen)); + + cp->result = DID_ERROR << 16 | lscsi_status; + } + if (sense_len) DEBUG5(qla2x00_dump_buffer(cp->sense_buffer, CMD_ACTUAL_SNSLEN(cp))); @@ -1166,7 +1185,7 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) case CS_TIMEOUT: cp->result = DID_BUS_BUSY << 16; - if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) { + if (IS_FWI2_CAPABLE(ha)) { DEBUG2(printk(KERN_INFO "scsi(%ld:%d:%d:%d): TIMEOUT status detected " "0x%x-0x%x\n", ha->host_no, cp->device->channel, @@ -1235,7 +1254,7 @@ qla2x00_status_cont_entry(scsi_qla_host_t *ha, sts_cont_entry_t *pkt) } /* Move sense data. */ - if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) + if (IS_FWI2_CAPABLE(ha)) host_to_fcp_swap(pkt->data, sizeof(pkt->data)); memcpy(sp->request_sense_ptr, pkt->data, sense_sz); DEBUG5(qla2x00_dump_buffer(sp->request_sense_ptr, sense_sz)); @@ -1483,7 +1502,7 @@ qla24xx_intr_handler(int irq, void *dev_id) qla_printk(KERN_INFO, ha, "RISC paused -- HCCR=%x, " "Dumping firmware!\n", hccr); - ha->isp_ops.fw_dump(ha, 1); + ha->isp_ops->fw_dump(ha, 1); set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); break; } else if ((stat & HSRX_RISC_INT) == 0) @@ -1617,7 +1636,7 @@ qla24xx_msix_default(int irq, void *dev_id) qla_printk(KERN_INFO, ha, "RISC paused -- HCCR=%x, " "Dumping firmware!\n", hccr); - ha->isp_ops.fw_dump(ha, 1); + ha->isp_ops->fw_dump(ha, 1); set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); break; } else if ((stat & HSRX_RISC_INT) == 0) @@ -1739,11 +1758,11 @@ qla2x00_request_irqs(scsi_qla_host_t *ha) int ret; /* If possible, enable MSI-X. */ - if (!IS_QLA2432(ha)) + if (!IS_QLA2432(ha) && !IS_QLA2532(ha)) goto skip_msix; - if (ha->chip_revision < QLA_MSIX_CHIP_REV_24XX || - !QLA_MSIX_FW_MODE_1(ha->fw_attributes)) { + if (IS_QLA2432(ha) && (ha->chip_revision < QLA_MSIX_CHIP_REV_24XX || + !QLA_MSIX_FW_MODE_1(ha->fw_attributes))) { DEBUG2(qla_printk(KERN_WARNING, ha, "MSI-X: Unsupported ISP2432 (0x%X, 0x%X).\n", ha->chip_revision, ha->fw_attributes)); @@ -1762,7 +1781,7 @@ qla2x00_request_irqs(scsi_qla_host_t *ha) "MSI-X: Falling back-to INTa mode -- %d.\n", ret); skip_msix: - if (!IS_QLA24XX(ha)) + if (!IS_QLA24XX(ha) && !IS_QLA2532(ha)) goto skip_msi; ret = pci_enable_msi(ha->pdev); @@ -1772,7 +1791,7 @@ skip_msix: } skip_msi: - ret = request_irq(ha->pdev->irq, ha->isp_ops.intr_handler, + ret = request_irq(ha->pdev->irq, ha->isp_ops->intr_handler, IRQF_DISABLED|IRQF_SHARED, QLA2XXX_DRIVER_NAME, ha); if (!ret) { ha->flags.inta_enabled = 1; |