diff options
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_os.c')
-rw-r--r-- | drivers/scsi/qla2xxx/qla_os.c | 125 |
1 files changed, 65 insertions, 60 deletions
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 93062593ebe..ec7ebb6037e 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -39,14 +39,14 @@ MODULE_PARM_DESC(ql2xlogintimeout, int qlport_down_retry = 30; module_param(qlport_down_retry, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(qlport_down_retry, - "Maximum number of command retries to a port that returns" + "Maximum number of command retries to a port that returns " "a PORT-DOWN status."); int ql2xplogiabsentdevice; module_param(ql2xplogiabsentdevice, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xplogiabsentdevice, "Option to enable PLOGI to devices that are not present after " - "a Fabric scan. This is needed for several broken switches." + "a Fabric scan. This is needed for several broken switches. " "Default is 0 - no PLOGI. 1 - perfom PLOGI."); int ql2xloginretrycount = 0; @@ -54,6 +54,19 @@ module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xloginretrycount, "Specify an alternate value for the NVRAM login retry count."); +int ql2xallocfwdump = 1; +module_param(ql2xallocfwdump, int, S_IRUGO|S_IRUSR); +MODULE_PARM_DESC(ql2xallocfwdump, + "Option to enable allocation of memory for a firmware dump " + "during HBA initialization. Memory allocation requirements " + "vary by ISP type. Default is 1 - allocate memory."); + +int extended_error_logging; +module_param(extended_error_logging, int, S_IRUGO|S_IRUSR); +MODULE_PARM_DESC(extended_error_logging, + "Option to enable extended error logging, " + "Default is 0 - no logging. 1 - log errors."); + static void qla2x00_free_device(scsi_qla_host_t *); static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha); @@ -624,7 +637,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) DEBUG2(printk("%s(%ld): aborting sp %p from RISC. pid=%ld.\n", __func__, ha->host_no, sp, serial)); - DEBUG3(qla2x00_print_scsi_cmd(cmd);) + DEBUG3(qla2x00_print_scsi_cmd(cmd)); spin_unlock_irqrestore(&ha->hardware_lock, flags); if (ha->isp_ops.abort_command(ha, sp)) { @@ -766,7 +779,7 @@ qla2xxx_eh_device_reset(struct scsi_cmnd *cmd) #endif } else { DEBUG2(printk(KERN_INFO - "%s failed: loop not ready\n",__func__);) + "%s failed: loop not ready\n",__func__)); } if (ret == FAILED) { @@ -1021,12 +1034,12 @@ qla2x00_loop_reset(scsi_qla_host_t *ha) /* Empty */ DEBUG2_3(printk("%s(%ld): **** FAILED ****\n", __func__, - ha->host_no);) + ha->host_no)); } else { /* Empty */ DEBUG3(printk("%s(%ld): exiting normally.\n", __func__, - ha->host_no);) + ha->host_no)); } return(status); @@ -1324,7 +1337,8 @@ qla24xx_disable_intrs(scsi_qla_host_t *ha) /* * PCI driver interface */ -static int qla2x00_probe_one(struct pci_dev *pdev) +static int __devinit +qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) { int ret = -ENODEV; device_reg_t __iomem *reg; @@ -1405,7 +1419,6 @@ static int qla2x00_probe_one(struct pci_dev *pdev) ha->isp_ops.read_nvram = qla2x00_read_nvram_data; ha->isp_ops.write_nvram = qla2x00_write_nvram_data; ha->isp_ops.fw_dump = qla2100_fw_dump; - ha->isp_ops.ascii_fw_dump = qla2100_ascii_fw_dump; ha->isp_ops.read_optrom = qla2x00_read_optrom_data; ha->isp_ops.write_optrom = qla2x00_write_optrom_data; if (IS_QLA2100(ha)) { @@ -1432,7 +1445,6 @@ static int qla2x00_probe_one(struct pci_dev *pdev) ha->isp_ops.pci_config = qla2300_pci_config; ha->isp_ops.intr_handler = qla2300_intr_handler; ha->isp_ops.fw_dump = qla2300_fw_dump; - ha->isp_ops.ascii_fw_dump = qla2300_ascii_fw_dump; ha->isp_ops.beacon_on = qla2x00_beacon_on; ha->isp_ops.beacon_off = qla2x00_beacon_off; ha->isp_ops.beacon_blink = qla2x00_beacon_blink; @@ -1469,7 +1481,6 @@ static int qla2x00_probe_one(struct pci_dev *pdev) ha->isp_ops.read_nvram = qla24xx_read_nvram_data; ha->isp_ops.write_nvram = qla24xx_write_nvram_data; ha->isp_ops.fw_dump = qla24xx_fw_dump; - ha->isp_ops.ascii_fw_dump = qla24xx_ascii_fw_dump; ha->isp_ops.read_optrom = qla24xx_read_optrom_data; ha->isp_ops.write_optrom = qla24xx_write_optrom_data; ha->isp_ops.beacon_on = qla24xx_beacon_on; @@ -1640,7 +1651,8 @@ probe_out: return ret; } -static void qla2x00_remove_one(struct pci_dev *pdev) +static void __devexit +qla2x00_remove_one(struct pci_dev *pdev) { scsi_qla_host_t *ha; @@ -1678,6 +1690,9 @@ qla2x00_free_device(scsi_qla_host_t *ha) kthread_stop(t); } + if (ha->eft) + qla2x00_trace_control(ha, TC_DISABLE, 0, 0); + /* Stop currently executing firmware. */ qla2x00_stop_firmware(ha); @@ -1899,17 +1914,6 @@ qla2x00_mem_alloc(scsi_qla_host_t *ha) } memset(ha->init_cb, 0, ha->init_cb_size); - /* Allocate ioctl related memory. */ - if (qla2x00_alloc_ioctl_mem(ha)) { - qla_printk(KERN_WARNING, ha, - "Memory Allocation failed - ioctl_mem\n"); - - qla2x00_mem_free(ha); - msleep(100); - - continue; - } - if (qla2x00_allocate_sp_pool(ha)) { qla_printk(KERN_WARNING, ha, "Memory Allocation failed - " @@ -1972,6 +1976,26 @@ qla2x00_mem_alloc(scsi_qla_host_t *ha) continue; } memset(ha->ct_sns, 0, sizeof(struct ct_sns_pkt)); + + if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) { + /* + * Get consistent memory allocated for SFP + * block. + */ + ha->sfp_data = dma_pool_alloc(ha->s_dma_pool, + GFP_KERNEL, &ha->sfp_data_dma); + if (ha->sfp_data == NULL) { + qla_printk(KERN_WARNING, ha, + "Memory Allocation failed - " + "sfp_data\n"); + + qla2x00_mem_free(ha); + msleep(100); + + continue; + } + memset(ha->sfp_data, 0, SFP_BLOCK_SIZE); + } } /* Done all allocations without any error. */ @@ -2006,12 +2030,16 @@ qla2x00_mem_free(scsi_qla_host_t *ha) return; } - /* free ioctl memory */ - qla2x00_free_ioctl_mem(ha); - /* free sp pool */ qla2x00_free_sp_pool(ha); + if (ha->fw_dump) { + if (ha->eft) + dma_free_coherent(&ha->pdev->dev, + ntohl(ha->fw_dump->eft_size), ha->eft, ha->eft_dma); + vfree(ha->fw_dump); + } + if (ha->sns_cmd) dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt), ha->sns_cmd, ha->sns_cmd_dma); @@ -2020,6 +2048,9 @@ qla2x00_mem_free(scsi_qla_host_t *ha) dma_free_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt), ha->ct_sns, ha->ct_sns_dma); + if (ha->sfp_data) + dma_pool_free(ha->s_dma_pool, ha->sfp_data, ha->sfp_data_dma); + if (ha->ms_iocb) dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma); @@ -2043,6 +2074,8 @@ qla2x00_mem_free(scsi_qla_host_t *ha) (ha->request_q_length + 1) * sizeof(request_t), ha->request_ring, ha->request_dma); + ha->eft = NULL; + ha->eft_dma = 0; ha->sns_cmd = NULL; ha->sns_cmd_dma = 0; ha->ct_sns = NULL; @@ -2071,13 +2104,9 @@ qla2x00_mem_free(scsi_qla_host_t *ha) } INIT_LIST_HEAD(&ha->fcports); - vfree(ha->fw_dump); - vfree(ha->fw_dump_buffer); - ha->fw_dump = NULL; ha->fw_dumped = 0; ha->fw_dump_reading = 0; - ha->fw_dump_buffer = NULL; vfree(ha->optrom_buffer); } @@ -2617,40 +2646,16 @@ static struct pci_device_id qla2xxx_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl); -static int __devinit -qla2xxx_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) -{ - return qla2x00_probe_one(pdev); -} - -static void __devexit -qla2xxx_remove_one(struct pci_dev *pdev) -{ - qla2x00_remove_one(pdev); -} - static struct pci_driver qla2xxx_pci_driver = { .name = QLA2XXX_DRIVER_NAME, .driver = { .owner = THIS_MODULE, }, .id_table = qla2xxx_pci_tbl, - .probe = qla2xxx_probe_one, - .remove = __devexit_p(qla2xxx_remove_one), + .probe = qla2x00_probe_one, + .remove = __devexit_p(qla2x00_remove_one), }; -static inline int -qla2x00_pci_module_init(void) -{ - return pci_module_init(&qla2xxx_pci_driver); -} - -static inline void -qla2x00_pci_module_exit(void) -{ - pci_unregister_driver(&qla2xxx_pci_driver); -} - /** * qla2x00_module_init - Module initialization. **/ @@ -2670,16 +2675,16 @@ qla2x00_module_init(void) /* Derive version string. */ strcpy(qla2x00_version_str, QLA2XXX_VERSION); -#if DEBUG_QLA2100 - strcat(qla2x00_version_str, "-debug"); -#endif + if (extended_error_logging) + strcat(qla2x00_version_str, "-debug"); + qla2xxx_transport_template = fc_attach_transport(&qla2xxx_transport_functions); if (!qla2xxx_transport_template) return -ENODEV; printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n"); - ret = qla2x00_pci_module_init(); + ret = pci_register_driver(&qla2xxx_pci_driver); if (ret) { kmem_cache_destroy(srb_cachep); fc_release_transport(qla2xxx_transport_template); @@ -2693,7 +2698,7 @@ qla2x00_module_init(void) static void __exit qla2x00_module_exit(void) { - qla2x00_pci_module_exit(); + pci_unregister_driver(&qla2xxx_pci_driver); qla2x00_release_firmware(); kmem_cache_destroy(srb_cachep); fc_release_transport(qla2xxx_transport_template); |