diff options
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_os.c')
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_os.c | 4456 |
1 files changed, 4456 insertions, 0 deletions
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c new file mode 100644 index 00000000000..b5863d8769e --- /dev/null +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -0,0 +1,4456 @@ +/* + * QLOGIC LINUX SOFTWARE + * + * QLogic ISP2x00 device driver for Linux 2.6.x + * Copyright (C) 2003-2004 QLogic Corporation + * (www.qlogic.com) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + */ +#include "qla_def.h" + +#include <linux/moduleparam.h> +#include <linux/vmalloc.h> +#include <linux/smp_lock.h> +#include <linux/delay.h> + +#include <scsi/scsi_tcq.h> +#include <scsi/scsicam.h> +#include <scsi/scsi_transport.h> +#include <scsi/scsi_transport_fc.h> + +/* + * Driver version + */ +char qla2x00_version_str[40]; + +/* + * SRB allocation cache + */ +char srb_cachep_name[16]; +kmem_cache_t *srb_cachep; + +/* + * Stats for all adpaters. + */ +struct _qla2x00stats qla2x00_stats; + +/* + * Ioctl related information. + */ +int num_hosts; +int apiHBAInstance; + +/* + * Module parameter information and variables + */ +int ql2xmaxqdepth; +module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(ql2xmaxqdepth, + "Maximum queue depth to report for target devices."); + +int ql2xlogintimeout = 20; +module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR); +MODULE_PARM_DESC(ql2xlogintimeout, + "Login timeout value in seconds."); + +int qlport_down_retry; +module_param(qlport_down_retry, int, S_IRUGO|S_IRUSR); +MODULE_PARM_DESC(qlport_down_retry, + "Maximum number of command retries to a port that returns" + "a PORT-DOWN status."); + +int ql2xretrycount = 20; +module_param(ql2xretrycount, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(ql2xretrycount, + "Maximum number of mid-layer retries allowed for a command. " + "Default value is 20, "); + +int displayConfig; +module_param(displayConfig, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(displayConfig, + "If 1 then display the configuration used in /etc/modprobe.conf."); + +int ql2xplogiabsentdevice; +module_param(ql2xplogiabsentdevice, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(ql2xplogiabsentdevice, + "Option to enable PLOGI to devices that are not present after " + "a Fabric scan. This is needed for several broken switches." + "Default is 0 - no PLOGI. 1 - perfom PLOGI."); + +int ql2xenablezio = 0; +module_param(ql2xenablezio, int, S_IRUGO|S_IRUSR); +MODULE_PARM_DESC(ql2xenablezio, + "Option to enable ZIO:If 1 then enable it otherwise" + " use the default set in the NVRAM." + " Default is 0 : disabled"); + +int ql2xintrdelaytimer = 10; +module_param(ql2xintrdelaytimer, int, S_IRUGO|S_IRUSR); +MODULE_PARM_DESC(ql2xintrdelaytimer, + "ZIO: Waiting time for Firmware before it generates an " + "interrupt to the host to notify completion of request."); + +int ConfigRequired; +module_param(ConfigRequired, int, S_IRUGO|S_IRUSR); +MODULE_PARM_DESC(ConfigRequired, + "If 1, then only configured devices passed in through the" + "ql2xopts parameter will be presented to the OS"); + +int Bind = BIND_BY_PORT_NAME; +module_param(Bind, int, S_IRUGO|S_IRUSR); +MODULE_PARM_DESC(Bind, + "Target persistent binding method: " + "0 by Portname (default); 1 by PortID; 2 by Nodename. "); + +int ql2xsuspendcount = SUSPEND_COUNT; +module_param(ql2xsuspendcount, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(ql2xsuspendcount, + "Number of 6-second suspend iterations to perform while a " + "target returns a <NOT READY> status. Default is 10 " + "iterations."); + +int ql2xdoinitscan = 1; +module_param(ql2xdoinitscan, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(ql2xdoinitscan, + "Signal mid-layer to perform scan after driver load: 0 -- no " + "signal sent to mid-layer."); + +int ql2xloginretrycount = 0; +module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR); +MODULE_PARM_DESC(ql2xloginretrycount, + "Specify an alternate value for the NVRAM login retry count."); + +/* + * Proc structures and functions + */ +struct info_str { + char *buffer; + int length; + off_t offset; + int pos; +}; + +static void copy_mem_info(struct info_str *, char *, int); +static int copy_info(struct info_str *, char *, ...); + +static void qla2x00_free_device(scsi_qla_host_t *); + +static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha); + +/* + * SCSI host template entry points + */ +static int qla2xxx_slave_configure(struct scsi_device * device); +static int qla2x00_queuecommand(struct scsi_cmnd *cmd, + void (*fn)(struct scsi_cmnd *)); +static int qla2xxx_eh_abort(struct scsi_cmnd *); +static int qla2xxx_eh_device_reset(struct scsi_cmnd *); +static int qla2xxx_eh_bus_reset(struct scsi_cmnd *); +static int qla2xxx_eh_host_reset(struct scsi_cmnd *); +static int qla2x00_loop_reset(scsi_qla_host_t *ha); +static int qla2x00_device_reset(scsi_qla_host_t *, fc_port_t *); + +static int qla2x00_proc_info(struct Scsi_Host *, char *, char **, + off_t, int, int); + +static struct scsi_host_template qla2x00_driver_template = { + .module = THIS_MODULE, + .name = "qla2xxx", + .proc_name = "qla2xxx", + .proc_info = qla2x00_proc_info, + .queuecommand = qla2x00_queuecommand, + + .eh_abort_handler = qla2xxx_eh_abort, + .eh_device_reset_handler = qla2xxx_eh_device_reset, + .eh_bus_reset_handler = qla2xxx_eh_bus_reset, + .eh_host_reset_handler = qla2xxx_eh_host_reset, + + .slave_configure = qla2xxx_slave_configure, + + .this_id = -1, + .cmd_per_lun = 3, + .use_clustering = ENABLE_CLUSTERING, + .sg_tablesize = SG_ALL, + + /* + * The RISC allows for each command to transfer (2^32-1) bytes of data, + * which equates to 0x800000 sectors. + */ + .max_sectors = 0xFFFF, +}; + +static struct scsi_transport_template *qla2xxx_transport_template = NULL; + +static void qla2x00_display_fc_names(scsi_qla_host_t *); + +/* TODO Convert to inlines + * + * Timer routines + */ +#define WATCH_INTERVAL 1 /* number of seconds */ + +static void qla2x00_timer(scsi_qla_host_t *); + +static __inline__ void qla2x00_start_timer(scsi_qla_host_t *, + void *, unsigned long); +static __inline__ void qla2x00_restart_timer(scsi_qla_host_t *, unsigned long); +static __inline__ void qla2x00_stop_timer(scsi_qla_host_t *); + +static inline void +qla2x00_start_timer(scsi_qla_host_t *ha, void *func, unsigned long interval) +{ + init_timer(&ha->timer); + ha->timer.expires = jiffies + interval * HZ; + ha->timer.data = (unsigned long)ha; + ha->timer.function = (void (*)(unsigned long))func; + add_timer(&ha->timer); + ha->timer_active = 1; +} + +static inline void +qla2x00_restart_timer(scsi_qla_host_t *ha, unsigned long interval) +{ + mod_timer(&ha->timer, jiffies + interval * HZ); +} + +static __inline__ void +qla2x00_stop_timer(scsi_qla_host_t *ha) +{ + del_timer_sync(&ha->timer); + ha->timer_active = 0; +} + +void qla2x00_cmd_timeout(srb_t *); + +static __inline__ void qla2x00_callback(scsi_qla_host_t *, struct scsi_cmnd *); +static __inline__ void sp_put(struct scsi_qla_host * ha, srb_t *sp); +static __inline__ void sp_get(struct scsi_qla_host * ha, srb_t *sp); +static __inline__ void +qla2x00_delete_from_done_queue(scsi_qla_host_t *, srb_t *); + +/* +* qla2x00_callback +* Returns the completed SCSI command to LINUX. +* +* Input: +* ha -- Host adapter structure +* cmd -- SCSI mid-level command structure. +* Returns: +* None +* Note:From failover point of view we always get the sp +* from vis_ha pool in queuecommand.So when we put it +* back to the pool it has to be the vis_ha. +* So rely on struct scsi_cmnd to get the vis_ha and not on sp. +*/ +static inline void +qla2x00_callback(scsi_qla_host_t *ha, struct scsi_cmnd *cmd) +{ + srb_t *sp = (srb_t *) CMD_SP(cmd); + scsi_qla_host_t *vis_ha; + os_lun_t *lq; + int got_sense; + unsigned long cpu_flags = 0; + + cmd->host_scribble = (unsigned char *) NULL; + vis_ha = (scsi_qla_host_t *) cmd->device->host->hostdata; + + if (sp == NULL) { + qla_printk(KERN_INFO, ha, + "%s(): **** CMD derives a NULL SP\n", + __func__); + DEBUG2(BUG();) + return; + } + + /* + * If command status is not DID_BUS_BUSY then go ahead and freed sp. + */ + /* + * Cancel command timeout + */ + qla2x00_delete_timer_from_cmd(sp); + + /* + * Put SP back in the free queue + */ + sp->cmd = NULL; + CMD_SP(cmd) = NULL; + lq = sp->lun_queue; + got_sense = (sp->flags & SRB_GOT_SENSE)? 1: 0; + add_to_free_queue(vis_ha, sp); + + if (host_byte(cmd->result) == DID_OK) { + /* device ok */ + ha->total_bytes += cmd->bufflen; + if (!got_sense) { + /* If lun was suspended then clear retry count */ + spin_lock_irqsave(&lq->q_lock, cpu_flags); + if (!test_bit(LUN_EXEC_DELAYED, &lq->q_flag)) + lq->q_state = LUN_STATE_READY; + spin_unlock_irqrestore(&lq->q_lock, cpu_flags); + } + } else if (host_byte(cmd->result) == DID_ERROR) { + /* device error */ + ha->total_dev_errs++; + } + + /* Call the mid-level driver interrupt handler */ + (*(cmd)->scsi_done)(cmd); +} + +/************************************************************************** +* sp_put +* +* Description: +* Decrement reference count and call the callback if we're the last +* owner of the specified sp. Will get the host_lock before calling +* the callback. +* +* Input: +* ha - pointer to the scsi_qla_host_t where the callback is to occur. +* sp - pointer to srb_t structure to use. +* +* Returns: +* +**************************************************************************/ +static inline void +sp_put(struct scsi_qla_host * ha, srb_t *sp) +{ + if (atomic_read(&sp->ref_count) == 0) { + qla_printk(KERN_INFO, ha, + "%s(): **** SP->ref_count not zero\n", + __func__); + DEBUG2(BUG();) + + return; + } + + if (!atomic_dec_and_test(&sp->ref_count)) { + return; + } + + qla2x00_callback(ha, sp->cmd); +} + +/************************************************************************** +* sp_get +* +* Description: +* Increment reference count of the specified sp. +* +* Input: +* sp - pointer to srb_t structure to use. +* +* Returns: +* +**************************************************************************/ +static inline void +sp_get(struct scsi_qla_host * ha, srb_t *sp) +{ + atomic_inc(&sp->ref_count); + + if (atomic_read(&sp->ref_count) > 2) { + qla_printk(KERN_INFO, ha, + "%s(): **** SP->ref_count greater than two\n", + __func__); + DEBUG2(BUG();) + + return; + } +} + +static inline void +qla2x00_delete_from_done_queue(scsi_qla_host_t *dest_ha, srb_t *sp) +{ + /* remove command from done list */ + list_del_init(&sp->list); + dest_ha->done_q_cnt--; + sp->state = SRB_NO_QUEUE_STATE; + + if (sp->flags & SRB_DMA_VALID) { + sp->flags &= ~SRB_DMA_VALID; + + /* Release memory used for this I/O */ + if (sp->cmd->use_sg) { + pci_unmap_sg(dest_ha->pdev, sp->cmd->request_buffer, + sp->cmd->use_sg, sp->cmd->sc_data_direction); + } else if (sp->cmd->request_bufflen) { + pci_unmap_page(dest_ha->pdev, sp->dma_handle, + sp->cmd->request_bufflen, + sp->cmd->sc_data_direction); + } + } +} + +static int qla2x00_do_dpc(void *data); + +static void qla2x00_rst_aen(scsi_qla_host_t *); + +static uint8_t qla2x00_mem_alloc(scsi_qla_host_t *); +static void qla2x00_mem_free(scsi_qla_host_t *ha); +static int qla2x00_allocate_sp_pool( scsi_qla_host_t *ha); +static void qla2x00_free_sp_pool(scsi_qla_host_t *ha); +static srb_t *qla2x00_get_new_sp(scsi_qla_host_t *ha); + +static ssize_t qla2x00_sysfs_read_fw_dump(struct kobject *, char *, loff_t, + size_t); +static ssize_t qla2x00_sysfs_write_fw_dump(struct kobject *, char *, loff_t, + size_t); +static struct bin_attribute sysfs_fw_dump_attr = { + .attr = { + .name = "fw_dump", + .mode = S_IRUSR | S_IWUSR, + .owner = THIS_MODULE, + }, + .size = 0, + .read = qla2x00_sysfs_read_fw_dump, + .write = qla2x00_sysfs_write_fw_dump, +}; +static ssize_t qla2x00_sysfs_read_nvram(struct kobject *, char *, loff_t, + size_t); +static ssize_t qla2x00_sysfs_write_nvram(struct kobject *, char *, loff_t, + size_t); +static struct bin_attribute sysfs_nvram_attr = { + .attr = { + .name = "nvram", + .mode = S_IRUSR | S_IWUSR, + .owner = THIS_MODULE, + }, + .size = sizeof(nvram_t), + .read = qla2x00_sysfs_read_nvram, + .write = qla2x00_sysfs_write_nvram, +}; + +/* -------------------------------------------------------------------------- */ + + +/* SysFS attributes. */ +static ssize_t qla2x00_sysfs_read_fw_dump(struct kobject *kobj, char *buf, + loff_t off, size_t count) +{ + struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj, + struct device, kobj))); + + if (ha->fw_dump_reading == 0) + return 0; + if (off > ha->fw_dump_buffer_len) + return 0; + if (off + count > ha->fw_dump_buffer_len) + count = ha->fw_dump_buffer_len - off; + + memcpy(buf, &ha->fw_dump_buffer[off], count); + + return (count); +} + +static ssize_t qla2x00_sysfs_write_fw_dump(struct kobject *kobj, char *buf, + loff_t off, size_t count) +{ + struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj, + struct device, kobj))); + int reading; + uint32_t dump_size; + + if (off != 0) + return (0); + + reading = simple_strtol(buf, NULL, 10); + switch (reading) { + case 0: + if (ha->fw_dump_reading == 1) { + qla_printk(KERN_INFO, ha, + "Firmware dump cleared on (%ld).\n", + ha->host_no); + + vfree(ha->fw_dump_buffer); + free_pages((unsigned long)ha->fw_dump, + ha->fw_dump_order); + + ha->fw_dump_reading = 0; + ha->fw_dump_buffer = NULL; + ha->fw_dump = NULL; + } + break; + case 1: + if (ha->fw_dump != NULL && !ha->fw_dump_reading) { + ha->fw_dump_reading = 1; + + dump_size = FW_DUMP_SIZE_1M; + if (ha->fw_memory_size < 0x20000) + dump_size = FW_DUMP_SIZE_128K; + else if (ha->fw_memory_size < 0x80000) + dump_size = FW_DUMP_SIZE_512K; + ha->fw_dump_buffer = (char *)vmalloc(dump_size); + if (ha->fw_dump_buffer == NULL) { + qla_printk(KERN_WARNING, ha, + "Unable to allocate memory for firmware " + "dump buffer (%d).\n", dump_size); + + ha->fw_dump_reading = 0; + return (count); + } + qla_printk(KERN_INFO, ha, + "Firmware dump ready for read on (%ld).\n", + ha->host_no); + memset(ha->fw_dump_buffer, 0, dump_size); + if (IS_QLA2100(ha) || IS_QLA2200(ha)) + qla2100_ascii_fw_dump(ha); + else + qla2300_ascii_fw_dump(ha); + ha->fw_dump_buffer_len = strlen(ha->fw_dump_buffer); + } + break; + } + return (count); +} + +static ssize_t qla2x00_sysfs_read_nvram(struct kobject *kobj, char *buf, + loff_t off, size_t count) +{ + struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj, + struct device, kobj))); + uint16_t *witer; + unsigned long flags; + uint16_t cnt; + + if (!capable(CAP_SYS_ADMIN) || off != 0 || count != sizeof(nvram_t)) + return 0; + + /* Read NVRAM. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + qla2x00_lock_nvram_access(ha); + witer = (uint16_t *)buf; + for (cnt = 0; cnt < count / 2; cnt++) { + *witer = cpu_to_le16(qla2x00_get_nvram_word(ha, + cnt+ha->nvram_base)); + witer++; + } + qla2x00_unlock_nvram_access(ha); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + return (count); +} + +static ssize_t qla2x00_sysfs_write_nvram(struct kobject *kobj, char *buf, + loff_t off, size_t count) +{ + struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj, + struct device, kobj))); + uint8_t *iter; + uint16_t *witer; + unsigned long flags; + uint16_t cnt; + uint8_t chksum; + + if (!capable(CAP_SYS_ADMIN) || off != 0 || count != sizeof(nvram_t)) + return 0; + + /* Checksum NVRAM. */ + iter = (uint8_t *)buf; + chksum = 0; + for (cnt = 0; cnt < count - 1; cnt++) + chksum += *iter++; + chksum = ~chksum + 1; + *iter = chksum; + + /* Write NVRAM. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + qla2x00_lock_nvram_access(ha); + qla2x00_release_nvram_protection(ha); + witer = (uint16_t *)buf; + for (cnt = 0; cnt < count / 2; cnt++) { + qla2x00_write_nvram_word(ha, cnt+ha->nvram_base, + cpu_to_le16(*witer)); + witer++; + } + qla2x00_unlock_nvram_access(ha); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + return (count); +} + +/* -------------------------------------------------------------------------- */ +static char * +qla2x00_get_pci_info_str(struct scsi_qla_host *ha, char *str) +{ + static char *pci_bus_modes[] = { + "33", "66", "100", "133", + }; + uint16_t pci_bus; + + strcpy(str, "PCI"); + pci_bus = (ha->pci_attr & (BIT_9 | BIT_10)) >> 9; + if (pci_bus) { + strcat(str, "-X ("); + strcat(str, pci_bus_modes[pci_bus]); + } else { + pci_bus = (ha->pci_attr & BIT_8) >> 8; + strcat(str, " ("); + strcat(str, pci_bus_modes[pci_bus]); + } + strcat(str, " MHz)"); + + return (str); +} + +char * +qla2x00_get_fw_version_str(struct scsi_qla_host *ha, char *str) +{ + char un_str[10]; + + sprintf(str, "%d.%02d.%02d ", ha->fw_major_version, + ha->fw_minor_version, + ha->fw_subminor_version); + + if (ha->fw_attributes & BIT_9) { + strcat(str, "FLX"); + return (str); + } + + switch (ha->fw_attributes & 0xFF) { + case 0x7: + strcat(str, "EF"); + break; + case 0x17: + strcat(str, "TP"); + break; + case 0x37: + strcat(str, "IP"); + break; + case 0x77: + strcat(str, "VI"); + break; + default: + sprintf(un_str, "(%x)", ha->fw_attributes); + strcat(str, un_str); + break; + } + if (ha->fw_attributes & 0x100) + strcat(str, "X"); + + return (str); +} + +/************************************************************************** +* qla2x00_queuecommand +* +* Description: +* Queue a command to the controller. +* +* Input: +* cmd - pointer to Scsi cmd structure +* fn - pointer to Scsi done function +* +* Returns: +* 0 - Always +* +* Note: +* The mid-level driver tries to ensures that queuecommand never gets invoked +* concurrently with itself or the interrupt handler (although the +* interrupt handler may call this routine as part of request-completion +* handling). +**************************************************************************/ +static int +qla2x00_queuecommand(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *)) +{ + fc_port_t *fcport; + os_lun_t *lq; + os_tgt_t *tq; + scsi_qla_host_t *ha, *ha2; + srb_t *sp; + struct Scsi_Host *host; + unsigned int b, t, l; + unsigned long handle; + int was_empty; + + + host = cmd->device->host; + ha = (scsi_qla_host_t *) host->hostdata; + was_empty = 1; + + cmd->scsi_done = fn; + + spin_unlock_irq(ha->host->host_lock); + + /* + * Allocate a command packet from the "sp" pool. If we cant get back + * one then let scsi layer come back later. + */ + if ((sp = qla2x00_get_new_sp(ha)) == NULL) { + qla_printk(KERN_WARNING, ha, + "Couldn't allocate memory for sp - retried.\n"); + + spin_lock_irq(ha->host->host_lock); + + return (1); + } + + sp->cmd = cmd; + CMD_SP(cmd) = (void *)sp; + + sp->flags = 0; + if (CMD_RESID_LEN(cmd) & SRB_IOCTL) { + /* Need to set sp->flags */ + sp->flags |= SRB_IOCTL; + CMD_RESID_LEN(cmd) = 0; /* Clear it since no more use. */ + } + + sp->fo_retry_cnt = 0; + sp->err_id = 0; + + /* Generate LU queue on bus, target, LUN */ + b = cmd->device->channel; + t = cmd->device->id; + l = cmd->device->lun; + + /* + * Start Command Timer. Typically it will be 2 seconds less than what + * is requested by the Host such that we can return the IO before + * aborts are called. + */ + if ((cmd->timeout_per_command / HZ) > QLA_CMD_TIMER_DELTA) + qla2x00_add_timer_to_cmd(sp, + (cmd->timeout_per_command / HZ) - QLA_CMD_TIMER_DELTA); + else + qla2x00_add_timer_to_cmd(sp, cmd->timeout_per_command / HZ); + + if (l >= ha->max_luns) { + cmd->result = DID_NO_CONNECT << 16; + sp->err_id = SRB_ERR_PORT; + + spin_lock_irq(ha->host->host_lock); + + sp_put(ha, sp); + + return (0); + } + + if ((tq = (os_tgt_t *) TGT_Q(ha, t)) != NULL && + (lq = (os_lun_t *) LUN_Q(ha, t, l)) != NULL) { + fcport = lq->fclun->fcport; + ha2 = fcport->ha; + } else { + lq = NULL; + fcport = NULL; + ha2 = ha; + } + + /* Set an invalid handle until we issue the command to ISP */ + /* then we will set the real handle value. */ + handle = INVALID_HANDLE; + cmd->host_scribble = (unsigned char *)handle; + + /* Bookkeeping information */ + sp->r_start = jiffies; /* Time the request was recieved. */ + sp->u_start = 0; + + /* Setup device queue pointers. */ + sp->tgt_queue = tq; + sp->lun_queue = lq; + + /* + * NOTE : q is NULL + * + * 1. When device is added from persistent binding but has not been + * discovered yet.The state of loopid == PORT_AVAIL. + * 2. When device is never found on the bus.(loopid == UNUSED) + * + * IF Device Queue is not created, or device is not in a valid state + * and link down error reporting is enabled, reject IO. + */ + if (fcport == NULL) { + DEBUG3(printk("scsi(%ld:%2d:%2d): port unavailable\n", + ha->host_no,t,l)); + + cmd->result = DID_NO_CONNECT << 16; + sp->err_id = SRB_ERR_PORT; + + spin_lock_irq(ha->host->host_lock); + + sp_put(ha, sp); + + return (0); + } + + /* Only modify the allowed count if the target is a *non* tape device */ + if ((fcport->flags & FCF_TAPE_PRESENT) == 0) { + sp->flags &= ~SRB_TAPE; + if (cmd->allowed < ql2xretrycount) { + cmd->allowed = ql2xretrycount; + } + } else + sp->flags |= SRB_TAPE; + + DEBUG5(printk("scsi(%ld:%2d:%2d): (queuecmd) queue sp = %p, " + "flags=0x%x fo retry=%d, pid=%ld\n", + ha->host_no, t, l, sp, sp->flags, sp->fo_retry_cnt, + cmd->serial_number)); + DEBUG5(qla2x00_print_scsi_cmd(cmd)); + + sp->fclun = lq->fclun; + sp->ha = ha2; + + if (cmd->sc_data_direction == DMA_BIDIRECTIONAL && + cmd->request_bufflen != 0) { + + DEBUG2(printk(KERN_WARNING + "scsi(%ld): Incorrect data direction - transfer " + "length=%d, direction=%d, pid=%ld, opcode=%x\n", + ha->host_no, cmd->request_bufflen, cmd->sc_data_direction, + cmd->serial_number, cmd->cmnd[0])); + } + + /* Final pre-check : + * + * Either PORT_DOWN_TIMER OR LINK_DOWN_TIMER Expired. + */ + if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD || + atomic_read(&ha2->loop_state) == LOOP_DEAD) { + /* + * Add the command to the done-queue for later failover + * processing. + */ + cmd->result = DID_NO_CONNECT << 16; + if (atomic_read(&ha2->loop_state) == LOOP_DOWN) + sp->err_id = SRB_ERR_LOOP; + else + sp->err_id = SRB_ERR_PORT; + + add_to_done_queue(ha, sp); + qla2x00_done(ha); + + spin_lock_irq(ha->host->host_lock); + return (0); + } + + if (tq && test_bit(TQF_SUSPENDED, &tq->flags) && + (sp->flags & SRB_TAPE) == 0) { + /* If target suspended put incoming I/O in retry_q. */ + qla2x00_extend_timeout(sp->cmd, 10); + add_to_scsi_retry_queue(ha, sp); + } else + was_empty = add_to_pending_queue(ha, sp); + + if ((IS_QLA2100(ha) || IS_QLA2200(ha)) && ha->flags.online) { + if (ha->response_ring_ptr->signature != RESPONSE_PROCESSED) { + unsigned long flags; + + spin_lock_irqsave(&ha->hardware_lock, flags); + qla2x00_process_response_queue(ha); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + } + } + + /* We submit to the hardware if: + * + * 1) we're on the cpu the irq's arrive on or + * 2) there are very few io's outstanding. + * + * In all other cases we'll let an irq pick up our IO and submit it + * to the controller to improve affinity. + */ + if (_smp_processor_id() == ha->last_irq_cpu || was_empty) + qla2x00_next(ha); + + spin_lock_irq(ha->host->host_lock); + + return (0); +} + +/* + * qla2x00_eh_wait_on_command + * Waits for the command to be returned by the Firmware for some + * max time. + * + * Input: + * ha = actual ha whose done queue will contain the command + * returned by firmware. + * cmd = Scsi Command to wait on. + * flag = Abort/Reset(Bus or Device Reset) + * + * Return: + * Not Found : 0 + * Found : 1 + */ +static int +qla2x00_eh_wait_on_command(scsi_qla_host_t *ha, struct scsi_cmnd *cmd) +{ +#define ABORT_POLLING_PERIOD HZ +#define ABORT_WAIT_TIME ((10 * HZ) / (ABORT_POLLING_PERIOD)) + + int found = 0; + int done = 0; + srb_t *rp = NULL; + struct list_head *list, *temp; + u_long max_wait_time = ABORT_WAIT_TIME; + + do { + /* Check on done queue */ + spin_lock(&ha->list_lock); + list_for_each_safe(list, temp, &ha->done_queue) { + rp = list_entry(list, srb_t, list); + + /* + * Found command. Just exit and wait for the cmd sent + * to OS. + */ + if (cmd == rp->cmd) { + found++; + DEBUG3(printk("%s: found in done queue.\n", + __func__);) + break; + } + } + spin_unlock(&ha->list_lock); + + /* Complete the cmd right away. */ + if (found) { + qla2x00_delete_from_done_queue(ha, rp); + sp_put(ha, rp); + done++; + break; + } + + spin_unlock_irq(ha->host->host_lock); + + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(ABORT_POLLING_PERIOD); + + spin_lock_irq(ha->host->host_lock); + + } while ((max_wait_time--)); + + if (done) + DEBUG2(printk(KERN_INFO "%s: found cmd=%p.\n", __func__, cmd)); + + return (done); +} + +/* + * qla2x00_wait_for_hba_online + * Wait till the HBA is online after going through + * <= MAX_RETRIES_OF_ISP_ABORT or + * finally HBA is disabled ie marked offline + * + * Input: + * ha - pointer to host adapter structure + * + * Note: + * Does context switching-Release SPIN_LOCK + * (if any) before calling this routine. + * + * Return: + * Success (Adapter is online) : 0 + * Failed (Adapter is offline/disabled) : 1 + */ +static int +qla2x00_wait_for_hba_online(scsi_qla_host_t *ha) +{ + int return_status; + unsigned long wait_online; + + wait_online = jiffies + (MAX_LOOP_TIMEOUT * HZ); + while (((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) || + test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags) || + test_bit(ISP_ABORT_RETRY, &ha->dpc_flags) || + ha->dpc_active) && time_before(jiffies, wait_online)) { + + msleep(1000); + } + if (ha->flags.online) + return_status = QLA_SUCCESS; + else + return_status = QLA_FUNCTION_FAILED; + + DEBUG2(printk("%s return_status=%d\n",__func__,return_status)); + + return (return_status); +} + +/* + * qla2x00_wait_for_loop_ready + * Wait for MAX_LOOP_TIMEOUT(5 min) value for loop + * to be in LOOP_READY state. + * Input: + * ha - pointer to host adapter structure + * + * Note: + * Does context switching-Release SPIN_LOCK + * (if any) before calling this routine. + * + * + * Return: + * Success (LOOP_READY) : 0 + * Failed (LOOP_NOT_READY) : 1 + */ +static inline int +qla2x00_wait_for_loop_ready(scsi_qla_host_t *ha) +{ + int return_status = QLA_SUCCESS; + unsigned long loop_timeout ; + + /* wait for 5 min at the max for loop to be ready */ + loop_timeout = jiffies + (MAX_LOOP_TIMEOUT * HZ); + + while ((!atomic_read(&ha->loop_down_timer) && + atomic_read(&ha->loop_state) == LOOP_DOWN) || + test_bit(CFG_ACTIVE, &ha->cfg_flags) || + atomic_read(&ha->loop_state) != LOOP_READY) { + msleep(1000); + if (time_after_eq(jiffies, loop_timeout)) { + return_status = QLA_FUNCTION_FAILED; + break; + } + } + return (return_status); +} + +/************************************************************************** +* qla2xxx_eh_abort +* +* Description: +* The abort function will abort the specified command. +* +* Input: +* cmd = Linux SCSI command packet to be aborted. +* +* Returns: +* Either SUCCESS or FAILED. +* +* Note: +**************************************************************************/ +int +qla2xxx_eh_abort(struct scsi_cmnd *cmd) +{ + int i; + int return_status = FAILED; + os_lun_t *q; + scsi_qla_host_t *ha; + scsi_qla_host_t *vis_ha; + srb_t *sp; + srb_t *rp; + struct list_head *list, *temp; + struct Scsi_Host *host; + uint8_t found = 0; + unsigned int b, t, l; + + /* Get the SCSI request ptr */ + sp = (srb_t *) CMD_SP(cmd); + + /* + * If sp is NULL, command is already returned. + * sp is NULLED just before we call back scsi_done + * + */ + if ((sp == NULL)) { + /* no action - we don't have command */ + qla_printk(KERN_INFO, to_qla_host(cmd->device->host), + "qla2xxx_eh_abort: cmd already done sp=%p\n", sp); + DEBUG(printk("qla2xxx_eh_abort: cmd already done sp=%p\n", sp);) + return SUCCESS; + } + if (sp) { + DEBUG(printk("qla2xxx_eh_abort: refcount %i \n", + atomic_read(&sp->ref_count));) + } + + vis_ha = (scsi_qla_host_t *) cmd->device->host->hostdata; + ha = (scsi_qla_host_t *)cmd->device->host->hostdata; + + host = ha->host; + + /* Generate LU queue on bus, target, LUN */ + b = cmd->device->channel; + t = cmd->device->id; + l = cmd->device->lun; + q = GET_LU_Q(vis_ha, t, l); + + qla_printk(KERN_INFO, ha, + "%s scsi(%ld:%d:%d:%d): cmd_timeout_in_sec=0x%x.\n", __func__, + ha->host_no, (int)b, (int)t, (int)l, + cmd->timeout_per_command / HZ); + + /* + * if no LUN queue then something is very wrong!!! + */ + if (q == NULL) { + qla_printk(KERN_WARNING, ha, + "qla2x00: (%x:%x:%x) No LUN queue.\n", b, t, l); + + /* no action - we don't have command */ + return FAILED; + } + + DEBUG2(printk("scsi(%ld): ABORTing cmd=%p sp=%p jiffies = 0x%lx, " + "timeout=%x, dpc_flags=%lx, vis_ha->dpc_flags=%lx q->flag=%lx\n", + ha->host_no, cmd, sp, jiffies, cmd->timeout_per_command / HZ, + ha->dpc_flags, vis_ha->dpc_flags, q->q_flag)); + DEBUG2(qla2x00_print_scsi_cmd(cmd)); + + spin_unlock_irq(ha->host->host_lock); + if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) { + DEBUG2(printk("%s failed:board disabled\n", __func__);) + spin_lock_irq(ha->host->host_lock); + return FAILED; + } + spin_lock_irq(ha->host->host_lock); + + /* Search done queue */ + spin_lock(&ha->list_lock); + list_for_each_safe(list, temp, &ha->done_queue) { + rp = list_entry(list, srb_t, list); + + if (cmd != rp->cmd) + continue; + + /* + * Found command.Remove it from done list. + * And proceed to post completion to scsi mid layer. + */ + return_status = SUCCESS; + found++; + qla2x00_delete_from_done_queue(ha, sp); + + break; + } /* list_for_each_safe() */ + spin_unlock(&ha->list_lock); + + /* + * Return immediately if the aborted command was already in the done + * queue + */ + if (found) { + qla_printk(KERN_INFO, ha, + "qla2xxx_eh_abort: Returning completed command=%p sp=%p\n", + cmd, sp); + sp_put(ha, sp); + return (return_status); + } + + + /* + * See if this command is in the retry queue + */ + DEBUG3(printk("qla2xxx_eh_abort: searching sp %p in retry " + "queue.\n", sp);) + + spin_lock(&ha->list_lock); + list_for_each_safe(list, temp, &ha->retry_queue) { + rp = list_entry(list, srb_t, list); + + if (cmd != rp->cmd) + continue; + + + DEBUG2(printk("qla2xxx_eh_abort: found " + "in retry queue. SP=%p\n", sp);) + + __del_from_retry_queue(ha, rp); + cmd->result = DID_ABORT << 16; + __add_to_done_queue(ha, rp); + + return_status = SUCCESS; + found++; + + break; + + } + spin_unlock(&ha->list_lock); + + + /* + * Our SP pointer points at the command we want to remove from the + * pending queue providing we haven't already sent it to the adapter. + */ + if (!found) { + DEBUG3(printk("qla2xxx_eh_abort: searching sp %p " + "in pending queue.\n", sp);) + + spin_lock(&vis_ha->list_lock); + list_for_each_safe(list, temp, &vis_ha->pending_queue) { + rp = list_entry(list, srb_t, list); + + if (rp->cmd != cmd) + continue; + + /* Remove srb from LUN queue. */ + rp->flags |= SRB_ABORTED; + + DEBUG2(printk("qla2xxx_eh_abort: Cmd in pending queue." + " serial_number %ld.\n", + sp->cmd->serial_number);) + + __del_from_pending_queue(vis_ha, rp); + cmd->result = DID_ABORT << 16; + + __add_to_done_queue(vis_ha, rp); + + return_status = SUCCESS; + + found++; + break; + } /* list_for_each_safe() */ + spin_unlock(&vis_ha->list_lock); + } /*End of if !found */ + + if (!found) { /* find the command in our active list */ + DEBUG3(printk("qla2xxx_eh_abort: searching sp %p " + "in outstanding queue.\n", sp);) + + spin_lock(&ha->hardware_lock); + for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) { + sp = ha->outstanding_cmds[i]; + + if (sp == NULL) + continue; + + if (sp->cmd != cmd) + continue; + + DEBUG2(printk("qla2xxx_eh_abort(%ld): aborting sp %p " + "from RISC. pid=%ld sp->state=%x q->q_flag=%lx\n", + ha->host_no, sp, sp->cmd->serial_number, + sp->state, q->q_flag);) + DEBUG(qla2x00_print_scsi_cmd(cmd);) + + /* Get a reference to the sp and drop the lock.*/ + sp_get(ha, sp); + + spin_unlock(&ha->hardware_lock); + spin_unlock_irq(ha->host->host_lock); + + if (qla2x00_abort_command(ha, sp)) { + DEBUG2(printk("qla2xxx_eh_abort: abort_command " + "mbx failed.\n");) + return_status = FAILED; + } else { + DEBUG3(printk("qla2xxx_eh_abort: abort_command " + " mbx success.\n");) + return_status = SUCCESS; + } + + sp_put(ha,sp); + + spin_lock_irq(ha->host->host_lock); + spin_lock(&ha->hardware_lock); + + /* + * Regardless of mailbox command status, go check on + * done queue just in case the sp is already done. + */ + break; + + }/*End of for loop */ + spin_unlock(&ha->hardware_lock); + + } /*End of if !found */ + + /* Waiting for our command in done_queue to be returned to OS.*/ + if (qla2x00_eh_wait_on_command(ha, cmd) != 0) { + DEBUG2(printk("qla2xxx_eh_abort: cmd returned back to OS.\n");) + return_status = SUCCESS; + } + + if (return_status == FAILED) { + qla_printk(KERN_INFO, ha, + "qla2xxx_eh_abort Exiting: status=Failed\n"); + return FAILED; + } + + DEBUG2(printk("qla2xxx_eh_abort: Exiting. return_status=0x%x.\n", + return_status)); + + return return_status; +} + +/************************************************************************** +* qla2x00_eh_wait_for_pending_target_commands +* +* Description: +* Waits for all the commands to come back from the specified target. +* +* Input: +* ha - pointer to scsi_qla_host structure. +* t - target +* Returns: +* Either SUCCESS or FAILED. +* +* Note: +**************************************************************************/ +static int +qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t) +{ + int cnt; + int status; + srb_t *sp; + struct scsi_cmnd *cmd; + + status = 0; + + /* + * Waiting for all commands for the designated target in the active + * array + */ + for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { + spin_lock(&ha->hardware_lock); + sp = ha->outstanding_cmds[cnt]; + if (sp) { + cmd = sp->cmd; + spin_unlock(&ha->hardware_lock); + if (cmd->device->id == t) { + if (!qla2x00_eh_wait_on_command(ha, cmd)) { + status = 1; + break; + } + } + } + else { + spin_unlock(&ha->hardware_lock); + } + } + return (status); +} + + +/************************************************************************** +* qla2xxx_eh_device_reset +* +* Description: +* The device reset function will reset the target and abort any +* executing commands. +* +* NOTE: The use of SP is undefined within this context. Do *NOT* +* attempt to use this value, even if you determine it is +* non-null. +* +* Input: +* cmd = Linux SCSI command packet of the command that cause the +* bus device reset. +* +* Returns: +* SUCCESS/FAILURE (defined as macro in scsi.h). +* +**************************************************************************/ +int +qla2xxx_eh_device_reset(struct scsi_cmnd *cmd) +{ + int return_status; + unsigned int b, t, l; + scsi_qla_host_t *ha; + os_tgt_t *tq; + os_lun_t *lq; + fc_port_t *fcport_to_reset; + srb_t *rp; + struct list_head *list, *temp; + + return_status = FAILED; + if (cmd == NULL) { + printk(KERN_INFO + "%s(): **** SCSI mid-layer passing in NULL cmd\n", + __func__); + + return (return_status); + } + + b = cmd->device->channel; + t = cmd->device->id; + l = cmd->device->lun; + ha = (scsi_qla_host_t *)cmd->device->host->hostdata; + + tq = TGT_Q(ha, t); + if (tq == NULL) { + qla_printk(KERN_INFO, ha, + "%s(): **** CMD derives a NULL TGT_Q\n", __func__); + + return (return_status); + } + lq = (os_lun_t *)LUN_Q(ha, t, l); + if (lq == NULL) { + printk(KERN_INFO + "%s(): **** CMD derives a NULL LUN_Q\n", __func__); + + return (return_status); + } + fcport_to_reset = lq->fclun->fcport; + + /* If we are coming in from the back-door, stall I/O until complete. */ + if (!cmd->device->host->eh_active) + set_bit(TQF_SUSPENDED, &tq->flags); + + qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d:%d): DEVICE RESET ISSUED.\n", ha->host_no, b, t, l); + + DEBUG2(printk(KERN_INFO + "scsi(%ld): DEVICE_RESET cmd=%p jiffies = 0x%lx, timeout=%x, " + "dpc_flags=%lx, status=%x allowed=%d cmd.state=%x\n", + ha->host_no, cmd, jiffies, cmd->timeout_per_command / HZ, + ha->dpc_flags, cmd->result, cmd->allowed, cmd->state)); + + /* Clear commands from the retry queue. */ + spin_lock(&ha->list_lock); + list_for_each_safe(list, temp, &ha->retry_queue) { + rp = list_entry(list, srb_t, list); + + if (t != rp->cmd->device->id) + continue; + + DEBUG2(printk(KERN_INFO + "qla2xxx_eh_reset: found in retry queue. SP=%p\n", rp)); + + __del_from_retry_queue(ha, rp); + rp->cmd->result = DID_RESET << 16; + __add_to_done_queue(ha, rp); + } + spin_unlock(&ha->list_lock); + + spin_unlock_irq(ha->host->host_lock); + + if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) { + DEBUG2(printk(KERN_INFO + "%s failed:board disabled\n",__func__)); + + spin_lock_irq(ha->host->host_lock); + goto eh_dev_reset_done; + } + + if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) { + if (qla2x00_device_reset(ha, fcport_to_reset) == 0) { + return_status = SUCCESS; + } + +#if defined(LOGOUT_AFTER_DEVICE_RESET) + if (return_status == SUCCESS) { + if (fcport_to_reset->flags & FC_FABRIC_DEVICE) { + qla2x00_fabric_logout(ha, + fcport_to_reset->loop_id); + qla2x00_mark_device_lost(ha, fcport_to_reset); + } + } +#endif + } else { + DEBUG2(printk(KERN_INFO + "%s failed: loop not ready\n",__func__);) + } + + spin_lock_irq(ha->host->host_lock); + + if (return_status == FAILED) { + DEBUG3(printk("%s(%ld): device reset failed\n", + __func__, ha->host_no)); + qla_printk(KERN_INFO, ha, "%s: device reset failed\n", + __func__); + + goto eh_dev_reset_done; + } + + /* + * If we are coming down the EH path, wait for all commands to + * complete for the device. + */ + if (cmd->device->host->eh_active) { + if (qla2x00_eh_wait_for_pending_target_commands(ha, t)) + return_status = FAILED; + + if (return_status == FAILED) { + DEBUG3(printk("%s(%ld): failed while waiting for " + "commands\n", __func__, ha->host_no)); + qla_printk(KERN_INFO, ha, + "%s: failed while waiting for commands\n", + __func__); + + goto eh_dev_reset_done; + } + } + + qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d:%d): DEVICE RESET SUCCEEDED.\n", + ha->host_no, b, t, l); + +eh_dev_reset_done: + + if (!cmd->device->host->eh_active) + clear_bit(TQF_SUSPENDED, &tq->flags); + + return (return_status); +} + +/************************************************************************** +* qla2x00_eh_wait_for_pending_commands +* +* Description: +* Waits for all the commands to come back from the specified host. +* +* Input: +* ha - pointer to scsi_qla_host structure. +* +* Returns: +* 1 : SUCCESS +* 0 : FAILED +* +* Note: +**************************************************************************/ +static int +qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha) +{ + int cnt; + int status; + srb_t *sp; + struct scsi_cmnd *cmd; + + status = 1; + + /* + * Waiting for all commands for the designated target in the active + * array + */ + for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { + spin_lock(&ha->hardware_lock); + sp = ha->outstanding_cmds[cnt]; + if (sp) { + cmd = sp->cmd; + spin_unlock(&ha->hardware_lock); + status = qla2x00_eh_wait_on_command(ha, cmd); + if (status == 0) + break; + } + else { + spin_unlock(&ha->hardware_lock); + } + } + return (status); +} + + +/************************************************************************** +* qla2xxx_eh_bus_reset +* +* Description: +* The bus reset function will reset the bus and abort any executing +* commands. +* +* Input: +* cmd = Linux SCSI command packet of the command that cause the +* bus reset. +* +* Returns: +* SUCCESS/FAILURE (defined as macro in scsi.h). +* +**************************************************************************/ +int +qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd) +{ + scsi_qla_host_t *ha; + srb_t *sp; + int rval = FAILED; + + ha = (scsi_qla_host_t *) cmd->device->host->hostdata; + sp = (srb_t *) CMD_SP(cmd); + + qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d:%d): LOOP RESET ISSUED.\n", ha->host_no, + cmd->device->channel, cmd->device->id, cmd->device->lun); + + spin_unlock_irq(ha->host->host_lock); + + if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) { + DEBUG2(printk("%s failed:board disabled\n",__func__)); + spin_lock_irq(ha->host->host_lock); + return FAILED; + } + + if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) { + if (qla2x00_loop_reset(ha) == QLA_SUCCESS) + rval = SUCCESS; + } + + spin_lock_irq(ha->host->host_lock); + if (rval == FAILED) + goto out; + + /* Waiting for our command in done_queue to be returned to OS.*/ + if (cmd->device->host->eh_active) + if (!qla2x00_eh_wait_for_pending_commands(ha)) + rval = FAILED; + + out: + qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__, + (rval == FAILED) ? "failed" : "succeded"); + + return rval; +} + +/************************************************************************** +* qla2xxx_eh_host_reset +* +* Description: +* The reset function will reset the Adapter. +* +* Input: +* cmd = Linux SCSI command packet of the command that cause the +* adapter reset. +* +* Returns: +* Either SUCCESS or FAILED. +* +* Note: +**************************************************************************/ +int +qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) +{ + scsi_qla_host_t *ha = (scsi_qla_host_t *)cmd->device->host->hostdata; + int rval = SUCCESS; + + /* Display which one we're actually resetting for debug. */ + DEBUG(printk("qla2xxx_eh_host_reset:Resetting scsi(%ld).\n", + ha->host_no)); + + /* + * Now issue reset. + */ + qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d:%d): ADAPTER RESET issued.\n", ha->host_no, + cmd->device->channel, cmd->device->id, cmd->device->lun); + + spin_unlock_irq(ha->host->host_lock); + + if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) + goto board_disabled; + + /* + * Fixme-may be dpc thread is active and processing + * loop_resync,so wait a while for it to + * be completed and then issue big hammer.Otherwise + * it may cause I/O failure as big hammer marks the + * devices as lost kicking of the port_down_timer + * while dpc is stuck for the mailbox to complete. + */ + /* Blocking call-Does context switching if loop is Not Ready */ + qla2x00_wait_for_loop_ready(ha); + set_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags); + if (qla2x00_abort_isp(ha)) { + clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags); + /* failed. schedule dpc to try */ + set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); + + if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) + goto board_disabled; + } + + clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags); + + spin_lock_irq(ha->host->host_lock); + if (rval == FAILED) + goto out; + + /* Waiting for our command in done_queue to be returned to OS.*/ + if (!qla2x00_eh_wait_for_pending_commands(ha)) + rval = FAILED; + + out: + qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__, + (rval == FAILED) ? "failed" : "succeded"); + + return rval; + + board_disabled: + spin_lock_irq(ha->host->host_lock); + + qla_printk(KERN_INFO, ha, "%s: failed:board disabled\n", __func__); + return FAILED; +} + + +/* +* qla2x00_loop_reset +* Issue loop reset. +* +* Input: +* ha = adapter block pointer. +* +* Returns: +* 0 = success +*/ +static int +qla2x00_loop_reset(scsi_qla_host_t *ha) +{ + int status = QLA_SUCCESS; + uint16_t t; + os_tgt_t *tq; + + if (ha->flags.enable_lip_reset) { + status = qla2x00_lip_reset(ha); + } + + if (status == QLA_SUCCESS && ha->flags.enable_target_reset) { + for (t = 0; t < MAX_FIBRE_DEVICES; t++) { + if ((tq = TGT_Q(ha, t)) == NULL) + continue; + + if (tq->fcport == NULL) + continue; + + status = qla2x00_target_reset(ha, 0, t); + if (status != QLA_SUCCESS) { + break; + } + } + } + + if (status == QLA_SUCCESS && + ((!ha->flags.enable_target_reset && + !ha->flags.enable_lip_reset) || + ha->flags.enable_lip_full_login)) { + + status = qla2x00_full_login_lip(ha); + } + + /* Issue marker command only when we are going to start the I/O */ + ha->marker_needed = 1; + + if (status) { + /* Empty */ + DEBUG2_3(printk("%s(%ld): **** FAILED ****\n", + __func__, + ha->host_no);) + } else { + /* Empty */ + DEBUG3(printk("%s(%ld): exiting normally.\n", + __func__, + ha->host_no);) + } + + return(status); +} + +/* + * qla2x00_device_reset + * Issue bus device reset message to the target. + * + * Input: + * ha = adapter block pointer. + * t = SCSI ID. + * TARGET_QUEUE_LOCK must be released. + * ADAPTER_STATE_LOCK must be released. + * + * Context: + * Kernel context. + */ +static int +qla2x00_device_reset(scsi_qla_host_t *ha, fc_port_t *reset_fcport) +{ + /* Abort Target command will clear Reservation */ + return qla2x00_abort_target(reset_fcport); +} + +/************************************************************************** +* qla2xxx_slave_configure +* +* Description: +**************************************************************************/ +int +qla2xxx_slave_configure(struct scsi_device *sdev) +{ + scsi_qla_host_t *ha = to_qla_host(sdev->host); + int queue_depth; + + if (IS_QLA2100(ha) || IS_QLA2200(ha)) + queue_depth = 16; + else + queue_depth = 32; + + if (sdev->tagged_supported) { + if (ql2xmaxqdepth != 0 && ql2xmaxqdepth <= 0xffffU) + queue_depth = ql2xmaxqdepth; + + ql2xmaxqdepth = queue_depth; + + scsi_activate_tcq(sdev, queue_depth); + + qla_printk(KERN_INFO, ha, + "scsi(%d:%d:%d:%d): Enabled tagged queuing, queue " + "depth %d.\n", + sdev->host->host_no, sdev->channel, sdev->id, sdev->lun, + sdev->queue_depth); + } else { + scsi_adjust_queue_depth(sdev, 0 /* TCQ off */, + sdev->host->hostt->cmd_per_lun /* 3 */); + } + + return (0); +} + +/** + * qla2x00_config_dma_addressing() - Configure OS DMA addressing method. + * @ha: HA context + * + * At exit, the @ha's flags.enable_64bit_addressing set to indicated + * supported addressing method. + */ +static void +qla2x00_config_dma_addressing(scsi_qla_host_t *ha) +{ + /* Assume 32bit DMA address */ + ha->flags.enable_64bit_addressing = 0; + ha->calc_request_entries = qla2x00_calc_iocbs_32; + ha->build_scsi_iocbs = qla2x00_build_scsi_iocbs_32; + + /* + * Given the two variants pci_set_dma_mask(), allow the compiler to + * assist in setting the proper dma mask. + */ + if (sizeof(dma_addr_t) > 4) { + if (pci_set_dma_mask(ha->pdev, DMA_64BIT_MASK) == 0) { + ha->flags.enable_64bit_addressing = 1; + ha->calc_request_entries = qla2x00_calc_iocbs_64; + ha->build_scsi_iocbs = qla2x00_build_scsi_iocbs_64; + + if (pci_set_consistent_dma_mask(ha->pdev, + DMA_64BIT_MASK)) { + qla_printk(KERN_DEBUG, ha, + "Failed to set 64 bit PCI consistent mask; " + "using 32 bit.\n"); + pci_set_consistent_dma_mask(ha->pdev, + DMA_32BIT_MASK); + } + } else { + qla_printk(KERN_DEBUG, ha, + "Failed to set 64 bit PCI DMA mask, falling back " + "to 32 bit MASK.\n"); + pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK); + } + } else { + pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK); + } +} + +static int +qla2x00_iospace_config(scsi_qla_host_t *ha) +{ + unsigned long pio, pio_len, pio_flags; + unsigned long mmio, mmio_len, mmio_flags; + + /* We only need PIO for Flash operations on ISP2312 v2 chips. */ + pio = pci_resource_start(ha->pdev, 0); + pio_len = pci_resource_len(ha->pdev, 0); + pio_flags = pci_resource_flags(ha->pdev, 0); + if (pio_flags & IORESOURCE_IO) { + if (pio_len < MIN_IOBASE_LEN) { + qla_printk(KERN_WARNING, ha, + "Invalid PCI I/O region size (%s)...\n", + pci_name(ha->pdev)); + pio = 0; + } + } else { + qla_printk(KERN_WARNING, ha, + "region #0 not a PIO resource (%s)...\n", + pci_name(ha->pdev)); + pio = 0; + } + + /* Use MMIO operations for all accesses. */ + mmio = pci_resource_start(ha->pdev, 1); + mmio_len = pci_resource_len(ha->pdev, 1); + mmio_flags = pci_resource_flags(ha->pdev, 1); + + if (!(mmio_flags & IORESOURCE_MEM)) { + qla_printk(KERN_ERR, ha, + "region #0 not an MMIO resource (%s), aborting\n", + pci_name(ha->pdev)); + goto iospace_error_exit; + } + if (mmio_len < MIN_IOBASE_LEN) { + qla_printk(KERN_ERR, ha, + "Invalid PCI mem region size (%s), aborting\n", + pci_name(ha->pdev)); + goto iospace_error_exit; + } + + if (pci_request_regions(ha->pdev, ha->brd_info->drv_name)) { + qla_printk(KERN_WARNING, ha, + "Failed to reserve PIO/MMIO regions (%s)\n", + pci_name(ha->pdev)); + + goto iospace_error_exit; + } + + ha->pio_address = pio; + ha->pio_length = pio_len; + ha->iobase = ioremap(mmio, MIN_IOBASE_LEN); + if (!ha->iobase) { + qla_printk(KERN_ERR, ha, + "cannot remap MMIO (%s), aborting\n", pci_name(ha->pdev)); + + goto iospace_error_exit; + } + + return (0); + +iospace_error_exit: + return (-ENOMEM); +} + +/* + * PCI driver interface + */ +int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) +{ + int ret; + device_reg_t __iomem *reg; + struct Scsi_Host *host; + scsi_qla_host_t *ha; + unsigned long flags = 0; + unsigned long wait_switch = 0; + char pci_info[20]; + char fw_str[30]; + + if (pci_enable_device(pdev)) + return -1; + + host = scsi_host_alloc(&qla2x00_driver_template, + sizeof(scsi_qla_host_t)); + if (host == NULL) { + printk(KERN_WARNING + "qla2xxx: Couldn't allocate host from scsi layer!\n"); + goto probe_disable_device; + } + + /* Clear our data area */ + ha = (scsi_qla_host_t *)host->hostdata; + memset(ha, 0, sizeof(scsi_qla_host_t)); + + ha->pdev = pdev; + ha->host = host; + ha->host_no = host->host_no; + ha->brd_info = brd_info; + sprintf(ha->host_str, "%s_%ld", ha->brd_info->drv_name, ha->host_no); + + /* Configure PCI I/O space */ + ret = qla2x00_iospace_config(ha); + if (ret != 0) { + goto probe_failed; + } + + /* Sanitize the information from PCI BIOS. */ + host->irq = pdev->irq; + + qla_printk(KERN_INFO, ha, + "Found an %s, irq %d, iobase 0x%p\n", ha->brd_info->isp_name, + host->irq, ha->iobase); + + spin_lock_init(&ha->hardware_lock); + + /* 4.23 Initialize /proc/scsi/qla2x00 counters */ + ha->actthreads = 0; + ha->qthreads = 0; + ha->total_isr_cnt = 0; + ha->total_isp_aborts = 0; + ha->total_lip_cnt = 0; + ha->total_dev_errs = 0; + ha->total_ios = 0; + ha->total_bytes = 0; + + ha->prev_topology = 0; + ha->ports = MAX_BUSES; + + if (IS_QLA2100(ha)) { + ha->max_targets = MAX_TARGETS_2100; + ha->mbx_count = MAILBOX_REGISTER_COUNT_2100; + ha->request_q_length = REQUEST_ENTRY_CNT_2100; + ha->response_q_length = RESPONSE_ENTRY_CNT_2100; + ha->last_loop_id = SNS_LAST_LOOP_ID_2100; + host->sg_tablesize = 32; + } else if (IS_QLA2200(ha)) { + ha->max_targets = MAX_TARGETS_2200; + ha->mbx_count = MAILBOX_REGISTER_COUNT; + ha->request_q_length = REQUEST_ENTRY_CNT_2200; + ha->response_q_length = RESPONSE_ENTRY_CNT_2100; + ha->last_loop_id = SNS_LAST_LOOP_ID_2100; + } else /*if (IS_QLA2300(ha))*/ { + ha->max_targets = MAX_TARGETS_2200; + ha->mbx_count = MAILBOX_REGISTER_COUNT; + ha->request_q_length = REQUEST_ENTRY_CNT_2200; + ha->response_q_length = RESPONSE_ENTRY_CNT_2300; + ha->last_loop_id = SNS_LAST_LOOP_ID_2300; + } + host->can_queue = ha->request_q_length + 128; + + /* load the F/W, read paramaters, and init the H/W */ + ha->instance = num_hosts; + + init_MUTEX(&ha->mbx_cmd_sem); + init_MUTEX_LOCKED(&ha->mbx_intr_sem); + + INIT_LIST_HEAD(&ha->list); + INIT_LIST_HEAD(&ha->fcports); + INIT_LIST_HEAD(&ha->rscn_fcports); + INIT_LIST_HEAD(&ha->done_queue); + INIT_LIST_HEAD(&ha->retry_queue); + INIT_LIST_HEAD(&ha->scsi_retry_queue); + INIT_LIST_HEAD(&ha->pending_queue); + + /* + * These locks are used to prevent more than one CPU + * from modifying the queue at the same time. The + * higher level "host_lock" will reduce most + * contention for these locks. + */ + spin_lock_init(&ha->mbx_reg_lock); + spin_lock_init(&ha->list_lock); + + ha->dpc_pid = -1; + init_completion(&ha->dpc_inited); + init_completion(&ha->dpc_exited); + + qla2x00_config_dma_addressing(ha); + if (qla2x00_mem_alloc(ha)) { + qla_printk(KERN_WARNING, ha, + "[ERROR] Failed to allocate memory for adapter\n"); + + goto probe_failed; + } + + if (qla2x00_initialize_adapter(ha) && + !(ha->device_flags & DFLG_NO_CABLE)) { + + qla_printk(KERN_WARNING, ha, + "Failed to initialize adapter\n"); + + DEBUG2(printk("scsi(%ld): Failed to initialize adapter - " + "Adapter flags %x.\n", + ha->host_no, ha->device_flags)); + + goto probe_failed; + } + + /* + * Startup the kernel thread for this host adapter + */ + ha->dpc_should_die = 0; + ha->dpc_pid = kernel_thread(qla2x00_do_dpc, ha, 0); + if (ha->dpc_pid < 0) { + qla_printk(KERN_WARNING, ha, + "Unable to start DPC thread!\n"); + + goto probe_failed; + } + wait_for_completion(&ha->dpc_inited); + + host->this_id = 255; + host->cmd_per_lun = 3; + host->max_cmd_len = MAX_CMDSZ; + host->max_channel = ha->ports - 1; + host->max_lun = ha->max_luns; + BUG_ON(qla2xxx_transport_template == NULL); + host->transportt = qla2xxx_transport_template; + host->unique_id = ha->instance; + host->max_id = ha->max_targets; + + if (IS_QLA2100(ha) || IS_QLA2200(ha)) + ret = request_irq(host->irq, qla2100_intr_handler, + SA_INTERRUPT|SA_SHIRQ, ha->brd_info->drv_name, ha); + else + ret = request_irq(host->irq, qla2300_intr_handler, + SA_INTERRUPT|SA_SHIRQ, ha->brd_info->drv_name, ha); + if (ret != 0) { + qla_printk(KERN_WARNING, ha, + "Failed to reserve interrupt %d already in use.\n", + host->irq); + goto probe_failed; + } + + /* Initialized the timer */ + qla2x00_start_timer(ha, qla2x00_timer, WATCH_INTERVAL); + + DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n", + ha->host_no, ha)); + + reg = ha->iobase; + + /* Disable ISP interrupts. */ + qla2x00_disable_intrs(ha); + + /* Ensure mailbox registers are free. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + WRT_REG_WORD(®->semaphore, 0); + WRT_REG_WORD(®->hccr, HCCR_CLR_RISC_INT); + WRT_REG_WORD(®->hccr, HCCR_CLR_HOST_INT); + + /* Enable proper parity */ + if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) { + if (IS_QLA2300(ha)) + /* SRAM parity */ + WRT_REG_WORD(®->hccr, (HCCR_ENABLE_PARITY + 0x1)); + else + /* SRAM, Instruction RAM and GP RAM parity */ + WRT_REG_WORD(®->hccr, (HCCR_ENABLE_PARITY + 0x7)); + } + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + /* Enable chip interrupts. */ + qla2x00_enable_intrs(ha); + + /* v2.19.5b6 */ + /* + * Wait around max loop_reset_delay secs for the devices to come + * on-line. We don't want Linux scanning before we are ready. + * + */ + for (wait_switch = jiffies + (ha->loop_reset_delay * HZ); + time_before(jiffies,wait_switch) && + !(ha->device_flags & (DFLG_NO_CABLE | DFLG_FABRIC_DEVICES)) + && (ha->device_flags & SWITCH_FOUND) ;) { + + qla2x00_check_fabric_devices(ha); + + msleep(10); + } + + pci_set_drvdata(pdev, ha); + ha->flags.init_done = 1; + num_hosts++; + + /* List the target we have found */ + if (displayConfig) { + qla2x00_display_fc_names(ha); + } + + if (scsi_add_host(host, &pdev->dev)) + goto probe_failed; + + sysfs_create_bin_file(&host->shost_gendev.kobj, &sysfs_fw_dump_attr); + sysfs_create_bin_file(&host->shost_gendev.kobj, &sysfs_nvram_attr); + + qla_printk(KERN_INFO, ha, "\n" + " QLogic Fibre Channel HBA Driver: %s\n" + " QLogic %s - %s\n" + " %s: %s @ %s hdma%c, host#=%ld, fw=%s\n", qla2x00_version_str, + ha->model_number, ha->model_desc ? ha->model_desc: "", + ha->brd_info->isp_name, qla2x00_get_pci_info_str(ha, pci_info), + pci_name(ha->pdev), ha->flags.enable_64bit_addressing ? '+': '-', + ha->host_no, qla2x00_get_fw_version_str(ha, fw_str)); + + if (ql2xdoinitscan) + scsi_scan_host(host); + + return 0; + +probe_failed: + qla2x00_free_device(ha); + + scsi_host_put(host); + +probe_disable_device: + pci_disable_device(pdev); + + return -1; +} +EXPORT_SYMBOL_GPL(qla2x00_probe_one); + +void qla2x00_remove_one(struct pci_dev *pdev) +{ + scsi_qla_host_t *ha; + + ha = pci_get_drvdata(pdev); + + sysfs_remove_bin_file(&ha->host->shost_gendev.kobj, + &sysfs_fw_dump_attr); + sysfs_remove_bin_file(&ha->host->shost_gendev.kobj, &sysfs_nvram_attr); + + scsi_remove_host(ha->host); + + qla2x00_free_device(ha); + + scsi_host_put(ha->host); + + pci_set_drvdata(pdev, NULL); +} +EXPORT_SYMBOL_GPL(qla2x00_remove_one); + +static void +qla2x00_free_device(scsi_qla_host_t *ha) +{ + int ret; + + /* Abort any outstanding IO descriptors. */ + if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) + qla2x00_cancel_io_descriptors(ha); + + /* turn-off interrupts on the card */ + if (ha->interrupts_on) + qla2x00_disable_intrs(ha); + + /* Disable timer */ + if (ha->timer_active) + qla2x00_stop_timer(ha); + + /* Kill the kernel thread for this host */ + if (ha->dpc_pid >= 0) { + ha->dpc_should_die = 1; + wmb(); + ret = kill_proc(ha->dpc_pid, SIGHUP, 1); + if (ret) { + qla_printk(KERN_ERR, ha, + "Unable to signal DPC thread -- (%d)\n", ret); + + /* TODO: SOMETHING MORE??? */ + } else { + wait_for_completion(&ha->dpc_exited); + } + } + + qla2x00_mem_free(ha); + + + ha->flags.online = 0; + + /* Detach interrupts */ + if (ha->pdev->irq) + free_irq(ha->pdev->irq, ha); + + /* release io space registers */ + if (ha->iobase) + iounmap(ha->iobase); + pci_release_regions(ha->pdev); + + pci_disable_device(ha->pdev); +} + + +/* + * The following support functions are adopted to handle + * the re-entrant qla2x00_proc_info correctly. + */ +static void +copy_mem_info(struct info_str *info, char *data, int len) +{ + if (info->pos + len > info->offset + info->length) + len = info->offset + info->length - info->pos; + + if (info->pos + len < info->offset) { + info->pos += len; + return; + } + + if (info->pos < info->offset) { + off_t partial; + + partial = info->offset - info->pos; + data += partial; + info->pos += partial; + len -= partial; + } + + if (len > 0) { + memcpy(info->buffer, data, len); + info->pos += len; + info->buffer += len; + } +} + +static int +copy_info(struct info_str *info, char *fmt, ...) +{ + va_list args; + char buf[256]; + int len; + + va_start(args, fmt); + len = vsprintf(buf, fmt, args); + va_end(args); + + copy_mem_info(info, buf, len); + + return (len); +} + +/************************************************************************* +* qla2x00_proc_info +* +* Description: +* Return information to handle /proc support for the driver. +* +* inout : decides the direction of the dataflow and the meaning of the +* variables +* buffer: If inout==0 data is being written to it else read from it +* (ptr to a page buffer) +* *start: If inout==0 start of the valid data in the buffer +* offset: If inout==0 starting offset from the beginning of all +* possible data to return. +* length: If inout==0 max number of bytes to be written into the buffer +* else number of bytes in "buffer" +* Returns: +* < 0: error. errno value. +* >= 0: sizeof data returned. +*************************************************************************/ +int +qla2x00_proc_info(struct Scsi_Host *shost, char *buffer, + char **start, off_t offset, int length, int inout) +{ + struct info_str info; + int retval = -EINVAL; + os_lun_t *up; + os_tgt_t *tq; + unsigned int t, l; + uint32_t tmp_sn; + uint32_t *flags; + uint8_t *loop_state; + scsi_qla_host_t *ha; + char fw_info[30]; + + DEBUG3(printk(KERN_INFO + "Entering proc_info buff_in=%p, offset=0x%lx, length=0x%x\n", + buffer, offset, length);) + + ha = (scsi_qla_host_t *) shost->hostdata; + + if (inout) { + /* Has data been written to the file? */ + DEBUG3(printk( + "%s: has data been written to the file. \n", + __func__);) + + return -ENOSYS; + } + + if (start) { + *start = buffer; + } + + info.buffer = buffer; + info.length = length; + info.offset = offset; + info.pos = 0; + + /* start building the print buffer */ + copy_info(&info, + "QLogic PCI to Fibre Channel Host Adapter for %s:\n" + " Firmware version %s, ", + ha->model_number, qla2x00_get_fw_version_str(ha, fw_info)); + + copy_info(&info, "Driver version %s\n", qla2x00_version_str); + + tmp_sn = ((ha->serial0 & 0x1f) << 16) | (ha->serial2 << 8) | + ha->serial1; + copy_info(&info, "ISP: %s, Serial# %c%05d\n", + ha->brd_info->isp_name, ('A' + tmp_sn/100000), (tmp_sn%100000)); + + copy_info(&info, + "Request Queue = 0x%llx, Response Queue = 0x%llx\n", + (unsigned long long)ha->request_dma, + (unsigned long long)ha->response_dma); + + copy_info(&info, + "Request Queue count = %d, Response Queue count = %d\n", + ha->request_q_length, ha->response_q_length); + + copy_info(&info, + "Total number of active commands = %ld\n", + ha->actthreads); + + copy_info(&info, + "Total number of interrupts = %ld\n", + (long)ha->total_isr_cnt); + + copy_info(&info, + " Device queue depth = 0x%x\n", + (ql2xmaxqdepth == 0) ? 16 : ql2xmaxqdepth); + + copy_info(&info, + "Number of free request entries = %d\n", ha->req_q_cnt); + + copy_info(&info, + "Number of mailbox timeouts = %ld\n", ha->total_mbx_timeout); + + copy_info(&info, + "Number of ISP aborts = %ld\n", ha->total_isp_aborts); + + copy_info(&info, + "Number of loop resyncs = %ld\n", ha->total_loop_resync); + + copy_info(&info, + "Number of retries for empty slots = %ld\n", + qla2x00_stats.outarray_full); + + copy_info(&info, + "Number of reqs in pending_q= %ld, retry_q= %d, " + "done_q= %ld, scsi_retry_q= %d\n", + ha->qthreads, ha->retry_q_cnt, + ha->done_q_cnt, ha->scsi_retry_q_cnt); + + + flags = (uint32_t *) &ha->flags; + + if (atomic_read(&ha->loop_state) == LOOP_DOWN) { + loop_state = "DOWN"; + } else if (atomic_read(&ha->loop_state) == LOOP_UP) { + loop_state = "UP"; + } else if (atomic_read(&ha->loop_state) == LOOP_READY) { + loop_state = "READY"; + } else if (atomic_read(&ha->loop_state) == LOOP_TIMEOUT) { + loop_state = "TIMEOUT"; + } else if (atomic_read(&ha->loop_state) == LOOP_UPDATE) { + loop_state = "UPDATE"; + } else { + loop_state = "UNKNOWN"; + } + + copy_info(&info, + "Host adapter:loop state = <%s>, flags = 0x%lx\n", + loop_state , *flags); + + copy_info(&info, "Dpc flags = 0x%lx\n", ha->dpc_flags); + + copy_info(&info, "MBX flags = 0x%x\n", ha->mbx_flags); + + copy_info(&info, "Link down Timeout = %3.3d\n", + ha->link_down_timeout); + + copy_info(&info, "Port down retry = %3.3d\n", + ha->port_down_retry_count); + + copy_info(&info, "Login retry count = %3.3d\n", + ha->login_retry_count); + + copy_info(&info, + "Commands retried with dropped frame(s) = %d\n", + ha->dropped_frame_error_cnt); + + copy_info(&info, + "Product ID = %04x %04x %04x %04x\n", ha->product_id[0], + ha->product_id[1], ha->product_id[2], ha->product_id[3]); + + copy_info(&info, "\n"); + + /* 2.25 node/port display to proc */ + /* Display the node name for adapter */ + copy_info(&info, "\nSCSI Device Information:\n"); + copy_info(&info, + "scsi-qla%d-adapter-node=" + "%02x%02x%02x%02x%02x%02x%02x%02x;\n", + (int)ha->instance, + ha->init_cb->node_name[0], + ha->init_cb->node_name[1], + ha->init_cb->node_name[2], + ha->init_cb->node_name[3], + ha->init_cb->node_name[4], + ha->init_cb->node_name[5], + ha->init_cb->node_name[6], + ha->init_cb->node_name[7]); + + /* display the port name for adapter */ + copy_info(&info, + "scsi-qla%d-adapter-port=" + "%02x%02x%02x%02x%02x%02x%02x%02x;\n", + (int)ha->instance, + ha->init_cb->port_name[0], + ha->init_cb->port_name[1], + ha->init_cb->port_name[2], + ha->init_cb->port_name[3], + ha->init_cb->port_name[4], + ha->init_cb->port_name[5], + ha->init_cb->port_name[6], + ha->init_cb->port_name[7]); + + /* Print out device port names */ + for (t = 0; t < MAX_FIBRE_DEVICES; t++) { + if ((tq = TGT_Q(ha, t)) == NULL) + continue; + + copy_info(&info, + "scsi-qla%d-target-%d=" + "%02x%02x%02x%02x%02x%02x%02x%02x;\n", + (int)ha->instance, t, + tq->port_name[0], tq->port_name[1], + tq->port_name[2], tq->port_name[3], + tq->port_name[4], tq->port_name[5], + tq->port_name[6], tq->port_name[7]); + } + + copy_info(&info, "\nSCSI LUN Information:\n"); + copy_info(&info, + "(Id:Lun) * - indicates lun is not registered with the OS.\n"); + + /* scan for all equipment stats */ + for (t = 0; t < MAX_FIBRE_DEVICES; t++) { + /* scan all luns */ + for (l = 0; l < ha->max_luns; l++) { + up = (os_lun_t *) GET_LU_Q(ha, t, l); + + if (up == NULL) { + continue; + } + if (up->fclun == NULL) { + continue; + } + + copy_info(&info, + "(%2d:%2d): Total reqs %ld,", + t,l,up->io_cnt); + + copy_info(&info, + " Pending reqs %ld,", + up->out_cnt); + + if (up->io_cnt < 4) { + copy_info(&info, + " flags 0x%x*,", + (int)up->q_flag); + } else { + copy_info(&info, + " flags 0x%x,", + (int)up->q_flag); + } + + copy_info(&info, + " %ld:%d:%02x %02x", + up->fclun->fcport->ha->instance, + up->fclun->fcport->cur_path, + up->fclun->fcport->loop_id, + up->fclun->device_type); + + copy_info(&info, "\n"); + + if (info.pos >= info.offset + info.length) { + /* No need to continue */ + goto profile_stop; + } + } + + if (info.pos >= info.offset + info.length) { + /* No need to continue */ + break; + } + } + +profile_stop: + + retval = info.pos > info.offset ? info.pos - info.offset : 0; + + DEBUG3(printk(KERN_INFO + "Exiting proc_info: info.pos=%d, offset=0x%lx, " + "length=0x%x\n", info.pos, offset, length);) + + return (retval); +} + +/* +* qla2x00_display_fc_names +* This routine will the node names of the different devices found +* after port inquiry. +* +* Input: +* cmd = SCSI command structure +* +* Returns: +* None. +*/ +static void +qla2x00_display_fc_names(scsi_qla_host_t *ha) +{ + uint16_t tgt; + os_tgt_t *tq; + + /* Display the node name for adapter */ + qla_printk(KERN_INFO, ha, + "scsi-qla%d-adapter-node=%02x%02x%02x%02x%02x%02x%02x%02x\\;\n", + (int)ha->instance, + ha->init_cb->node_name[0], + ha->init_cb->node_name[1], + ha->init_cb->node_name[2], + ha->init_cb->node_name[3], + ha->init_cb->node_name[4], + ha->init_cb->node_name[5], + ha->init_cb->node_name[6], + ha->init_cb->node_name[7]); + + /* display the port name for adapter */ + qla_printk(KERN_INFO, ha, + "scsi-qla%d-adapter-port=%02x%02x%02x%02x%02x%02x%02x%02x\\;\n", + (int)ha->instance, + ha->init_cb->port_name[0], + ha->init_cb->port_name[1], + ha->init_cb->port_name[2], + ha->init_cb->port_name[3], + ha->init_cb->port_name[4], + ha->init_cb->port_name[5], + ha->init_cb->port_name[6], + ha->init_cb->port_name[7]); + + /* Print out device port names */ + for (tgt = 0; tgt < MAX_TARGETS; tgt++) { + if ((tq = ha->otgt[tgt]) == NULL) + continue; + + if (tq->fcport == NULL) + continue; + + switch (ha->binding_type) { + case BIND_BY_PORT_NAME: + qla_printk(KERN_INFO, ha, + "scsi-qla%d-tgt-%d-di-0-port=" + "%02x%02x%02x%02x%02x%02x%02x%02x\\;\n", + (int)ha->instance, + tgt, + tq->port_name[0], + tq->port_name[1], + tq->port_name[2], + tq->port_name[3], + tq->port_name[4], + tq->port_name[5], + tq->port_name[6], + tq->port_name[7]); + + break; + + case BIND_BY_PORT_ID: + qla_printk(KERN_INFO, ha, + "scsi-qla%d-tgt-%d-di-0-pid=" + "%02x%02x%02x\\;\n", + (int)ha->instance, + tgt, + tq->d_id.b.domain, + tq->d_id.b.area, + tq->d_id.b.al_pa); + break; + } + +#if VSA + qla_printk(KERN_INFO, ha, + "scsi-qla%d-target-%d-vsa=01;\n", (int)ha->instance, tgt); +#endif + } +} + +/* + * qla2x00_suspend_lun + * Suspend lun and start port down timer + * + * Input: + * ha = visable adapter block pointer. + * lq = lun queue + * cp = Scsi command pointer + * time = time in seconds + * count = number of times to let time expire + * delay_lun = non-zero, if lun should be delayed rather than suspended + * + * Return: + * QLA_SUCCESS -- suspended lun + * QLA_FUNCTION_FAILED -- Didn't suspend lun + * + * Context: + * Interrupt context. + */ +int +__qla2x00_suspend_lun(scsi_qla_host_t *ha, + os_lun_t *lq, int time, int count, int delay_lun) +{ + int rval; + srb_t *sp; + struct list_head *list, *temp; + unsigned long flags; + + rval = QLA_SUCCESS; + + /* if the lun_q is already suspended then don't do it again */ + if (lq->q_state == LUN_STATE_READY ||lq->q_state == LUN_STATE_RUN) { + + spin_lock_irqsave(&lq->q_lock, flags); + if (lq->q_state == LUN_STATE_READY) { + lq->q_max = count; + lq->q_count = 0; + } + /* Set the suspend time usually 6 secs */ + atomic_set(&lq->q_timer, time); + + /* now suspend the lun */ + lq->q_state = LUN_STATE_WAIT; + + if (delay_lun) { + set_bit(LUN_EXEC_DELAYED, &lq->q_flag); + DEBUG(printk(KERN_INFO + "scsi(%ld): Delay lun execution for %d secs, " + "count=%d, max count=%d, state=%d\n", + ha->host_no, + time, + lq->q_count, lq->q_max, lq->q_state)); + } else { + DEBUG(printk(KERN_INFO + "scsi(%ld): Suspend lun for %d secs, count=%d, " + "max count=%d, state=%d\n", + ha->host_no, + time, + lq->q_count, lq->q_max, lq->q_state)); + } + spin_unlock_irqrestore(&lq->q_lock, flags); + + /* + * Remove all pending commands from request queue and put them + * in the scsi_retry queue. + */ + spin_lock_irqsave(&ha->list_lock, flags); + list_for_each_safe(list, temp, &ha->pending_queue) { + sp = list_entry(list, srb_t, list); + if (sp->lun_queue != lq) + continue; + + __del_from_pending_queue(ha, sp); + + if (sp->cmd->allowed < count) + sp->cmd->allowed = count; + __add_to_scsi_retry_queue(ha, sp); + + } /* list_for_each_safe */ + spin_unlock_irqrestore(&ha->list_lock, flags); + rval = QLA_SUCCESS; + } else { + rval = QLA_FUNCTION_FAILED; + } + + return (rval); +} + +/* + * qla2x00_mark_device_lost Updates fcport state when device goes offline. + * + * Input: ha = adapter block pointer. fcport = port structure pointer. + * + * Return: None. + * + * Context: + */ +void qla2x00_mark_device_lost(scsi_qla_host_t *ha, fc_port_t *fcport, + int do_login) +{ + /* + * We may need to retry the login, so don't change the state of the + * port but do the retries. + */ + if (atomic_read(&fcport->state) != FCS_DEVICE_DEAD) + atomic_set(&fcport->state, FCS_DEVICE_LOST); + + if (!do_login) + return; + + if (fcport->login_retry == 0) { + fcport->login_retry = ha->login_retry_count; + set_bit(RELOGIN_NEEDED, &ha->dpc_flags); + + DEBUG(printk("scsi(%ld): Port login retry: " + "%02x%02x%02x%02x%02x%02x%02x%02x, " + "id = 0x%04x retry cnt=%d\n", + ha->host_no, + fcport->port_name[0], + fcport->port_name[1], + fcport->port_name[2], + fcport->port_name[3], + fcport->port_name[4], + fcport->port_name[5], + fcport->port_name[6], + fcport->port_name[7], + fcport->loop_id, + fcport->login_retry)); + } +} + +/* + * qla2x00_mark_all_devices_lost + * Updates fcport state when device goes offline. + * + * Input: + * ha = adapter block pointer. + * fcport = port structure pointer. + * + * Return: + * None. + * + * Context: + */ +void +qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha) +{ + fc_port_t *fcport; + + list_for_each_entry(fcport, &ha->fcports, list) { + if (fcport->port_type != FCT_TARGET) + continue; + + /* + * No point in marking the device as lost, if the device is + * already DEAD. + */ + if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD) + continue; + + atomic_set(&fcport->state, FCS_DEVICE_LOST); + } +} + +/* +* qla2x00_mem_alloc +* Allocates adapter memory. +* +* Returns: +* 0 = success. +* 1 = failure. +*/ +static uint8_t +qla2x00_mem_alloc(scsi_qla_host_t *ha) +{ + char name[16]; + uint8_t status = 1; + int retry= 10; + + do { + /* + * This will loop only once if everything goes well, else some + * number of retries will be performed to get around a kernel + * bug where available mem is not allocated until after a + * little delay and a retry. + */ + ha->request_ring = dma_alloc_coherent(&ha->pdev->dev, + (ha->request_q_length + 1) * sizeof(request_t), + &ha->request_dma, GFP_KERNEL); + if (ha->request_ring == NULL) { + qla_printk(KERN_WARNING, ha, + "Memory Allocation failed - request_ring\n"); + + qla2x00_mem_free(ha); + msleep(100); + + continue; + } + + ha->response_ring = dma_alloc_coherent(&ha->pdev->dev, + (ha->response_q_length + 1) * sizeof(response_t), + &ha->response_dma, GFP_KERNEL); + if (ha->response_ring == NULL) { + qla_printk(KERN_WARNING, ha, + "Memory Allocation failed - response_ring\n"); + + qla2x00_mem_free(ha); + msleep(100); + + continue; + } + + ha->gid_list = dma_alloc_coherent(&ha->pdev->dev, GID_LIST_SIZE, + &ha->gid_list_dma, GFP_KERNEL); + if (ha->gid_list == NULL) { + qla_printk(KERN_WARNING, ha, + "Memory Allocation failed - gid_list\n"); + + qla2x00_mem_free(ha); + msleep(100); + + continue; + } + + ha->rlc_rsp = dma_alloc_coherent(&ha->pdev->dev, + sizeof(rpt_lun_cmd_rsp_t), &ha->rlc_rsp_dma, GFP_KERNEL); + if (ha->rlc_rsp == NULL) { + qla_printk(KERN_WARNING, ha, + "Memory Allocation failed - rlc"); + + qla2x00_mem_free(ha); + msleep(100); + + continue; + } + + snprintf(name, sizeof(name), "qla2xxx_%ld", ha->host_no); + ha->s_dma_pool = dma_pool_create(name, &ha->pdev->dev, + DMA_POOL_SIZE, 8, 0); + if (ha->s_dma_pool == NULL) { + qla_printk(KERN_WARNING, ha, + "Memory Allocation failed - s_dma_pool\n"); + + qla2x00_mem_free(ha); + msleep(100); + + continue; + } + + /* get consistent memory allocated for init control block */ + ha->init_cb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, + &ha->init_cb_dma); + if (ha->init_cb == NULL) { + qla_printk(KERN_WARNING, ha, + "Memory Allocation failed - init_cb\n"); + + qla2x00_mem_free(ha); + msleep(100); + + continue; + } + memset(ha->init_cb, 0, sizeof(init_cb_t)); + + /* Get consistent memory allocated for Get Port Database cmd */ + ha->iodesc_pd = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, + &ha->iodesc_pd_dma); + if (ha->iodesc_pd == NULL) { + /* error */ + qla_printk(KERN_WARNING, ha, + "Memory Allocation failed - iodesc_pd\n"); + + qla2x00_mem_free(ha); + msleep(100); + + continue; + } + memset(ha->iodesc_pd, 0, PORT_DATABASE_SIZE); + + /* Allocate ioctl related memory. */ + if (qla2x00_alloc_ioctl_mem(ha)) { + qla_printk(KERN_WARNING, ha, + "Memory Allocation failed - ioctl_mem\n"); + + qla2x00_mem_free(ha); + msleep(100); + + continue; + } + + if (qla2x00_allocate_sp_pool(ha)) { + qla_printk(KERN_WARNING, ha, + "Memory Allocation failed - " + "qla2x00_allocate_sp_pool()\n"); + + qla2x00_mem_free(ha); + msleep(100); + + continue; + } + + /* Allocate memory for SNS commands */ + if (IS_QLA2100(ha) || IS_QLA2200(ha)) { + /* Get consistent memory allocated for SNS commands */ + ha->sns_cmd = dma_alloc_coherent(&ha->pdev->dev, + sizeof(struct sns_cmd_pkt), &ha->sns_cmd_dma, + GFP_KERNEL); + if (ha->sns_cmd == NULL) { + /* error */ + qla_printk(KERN_WARNING, ha, + "Memory Allocation failed - sns_cmd\n"); + + qla2x00_mem_free(ha); + msleep(100); + + continue; + } + memset(ha->sns_cmd, 0, sizeof(struct sns_cmd_pkt)); + } else { + /* Get consistent memory allocated for MS IOCB */ + ha->ms_iocb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, + &ha->ms_iocb_dma); + if (ha->ms_iocb == NULL) { + /* error */ + qla_printk(KERN_WARNING, ha, + "Memory Allocation failed - ms_iocb\n"); + + qla2x00_mem_free(ha); + msleep(100); + + continue; + } + memset(ha->ms_iocb, 0, sizeof(ms_iocb_entry_t)); + + /* + * Get consistent memory allocated for CT SNS + * commands + */ + ha->ct_sns = dma_alloc_coherent(&ha->pdev->dev, + sizeof(struct ct_sns_pkt), &ha->ct_sns_dma, + GFP_KERNEL); + if (ha->ct_sns == NULL) { + /* error */ + qla_printk(KERN_WARNING, ha, + "Memory Allocation failed - ct_sns\n"); + + qla2x00_mem_free(ha); + msleep(100); + + continue; + } + memset(ha->ct_sns, 0, sizeof(struct ct_sns_pkt)); + } + + /* Done all allocations without any error. */ + status = 0; + + } while (retry-- && status != 0); + + if (status) { + printk(KERN_WARNING + "%s(): **** FAILED ****\n", __func__); + } + + return(status); +} + +/* +* qla2x00_mem_free +* Frees all adapter allocated memory. +* +* Input: +* ha = adapter block pointer. +*/ +static void +qla2x00_mem_free(scsi_qla_host_t *ha) +{ + uint32_t t; + struct list_head *fcpl, *fcptemp; + fc_port_t *fcport; + struct list_head *fcll, *fcltemp; + fc_lun_t *fclun; + unsigned long wtime;/* max wait time if mbx cmd is busy. */ + + if (ha == NULL) { + /* error */ + DEBUG2(printk("%s(): ERROR invalid ha pointer.\n", __func__)); + return; + } + + /* Free the target queues */ + for (t = 0; t < MAX_TARGETS; t++) { + qla2x00_tgt_free(ha, t); + } + + /* Make sure all other threads are stopped. */ + wtime = 60 * HZ; + while (ha->dpc_wait && wtime) { + set_current_state(TASK_INTERRUPTIBLE); + wtime = schedule_timeout(wtime); + } + + /* free ioctl memory */ + qla2x00_free_ioctl_mem(ha); + + /* free sp pool */ + qla2x00_free_sp_pool(ha); + + if (ha->sns_cmd) + dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt), + ha->sns_cmd, ha->sns_cmd_dma); + + if (ha->ct_sns) + dma_free_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt), + ha->ct_sns, ha->ct_sns_dma); + + if (ha->ms_iocb) + dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma); + + if (ha->iodesc_pd) + dma_pool_free(ha->s_dma_pool, ha->iodesc_pd, ha->iodesc_pd_dma); + + if (ha->init_cb) + dma_pool_free(ha->s_dma_pool, ha->init_cb, ha->init_cb_dma); + + if (ha->s_dma_pool) + dma_pool_destroy(ha->s_dma_pool); + + if (ha->rlc_rsp) + dma_free_coherent(&ha->pdev->dev, + sizeof(rpt_lun_cmd_rsp_t), ha->rlc_rsp, + ha->rlc_rsp_dma); + + if (ha->gid_list) + dma_free_coherent(&ha->pdev->dev, GID_LIST_SIZE, ha->gid_list, + ha->gid_list_dma); + + if (ha->response_ring) + dma_free_coherent(&ha->pdev->dev, + (ha->response_q_length + 1) * sizeof(response_t), + ha->response_ring, ha->response_dma); + + if (ha->request_ring) + dma_free_coherent(&ha->pdev->dev, + (ha->request_q_length + 1) * sizeof(request_t), + ha->request_ring, ha->request_dma); + + ha->sns_cmd = NULL; + ha->sns_cmd_dma = 0; + ha->ct_sns = NULL; + ha->ct_sns_dma = 0; + ha->ms_iocb = NULL; + ha->ms_iocb_dma = 0; + ha->iodesc_pd = NULL; + ha->iodesc_pd_dma = 0; + ha->init_cb = NULL; + ha->init_cb_dma = 0; + + ha->s_dma_pool = NULL; + + ha->rlc_rsp = NULL; + ha->rlc_rsp_dma = 0; + ha->gid_list = NULL; + ha->gid_list_dma = 0; + + ha->response_ring = NULL; + ha->response_dma = 0; + ha->request_ring = NULL; + ha->request_dma = 0; + + list_for_each_safe(fcpl, fcptemp, &ha->fcports) { + fcport = list_entry(fcpl, fc_port_t, list); + + /* fc luns */ + list_for_each_safe(fcll, fcltemp, &fcport->fcluns) { + fclun = list_entry(fcll, fc_lun_t, list); + + list_del_init(&fclun->list); + kfree(fclun); + } + + /* fc ports */ + list_del_init(&fcport->list); + kfree(fcport); + } + INIT_LIST_HEAD(&ha->fcports); + + if (ha->fw_dump) + free_pages((unsigned long)ha->fw_dump, ha->fw_dump_order); + + if (ha->fw_dump_buffer) + vfree(ha->fw_dump_buffer); + + ha->fw_dump = NULL; + ha->fw_dump_reading = 0; + ha->fw_dump_buffer = NULL; +} + +/* + * qla2x00_allocate_sp_pool + * This routine is called during initialization to allocate + * memory for local srb_t. + * + * Input: + * ha = adapter block pointer. + * + * Context: + * Kernel context. + * + * Note: Sets the ref_count for non Null sp to one. + */ +static int +qla2x00_allocate_sp_pool(scsi_qla_host_t *ha) +{ + int rval; + + rval = QLA_SUCCESS; + ha->srb_mempool = mempool_create(SRB_MIN_REQ, mempool_alloc_slab, + mempool_free_slab, srb_cachep); + if (ha->srb_mempool == NULL) { + qla_printk(KERN_INFO, ha, "Unable to allocate SRB mempool.\n"); + rval = QLA_FUNCTION_FAILED; + } + return (rval); +} + +/* + * This routine frees all adapter allocated memory. + * + */ +static void +qla2x00_free_sp_pool( scsi_qla_host_t *ha) +{ + if (ha->srb_mempool) { + mempool_destroy(ha->srb_mempool); + ha->srb_mempool = NULL; + } +} + +/************************************************************************** +* qla2x00_do_dpc +* This kernel thread is a task that is schedule by the interrupt handler +* to perform the background processing for interrupts. +* +* Notes: +* This task always run in the context of a kernel thread. It +* is kick-off by the driver's detect code and starts up +* up one per adapter. It immediately goes to sleep and waits for +* some fibre event. When either the interrupt handler or +* the timer routine detects a event it will one of the task +* bits then wake us up. +**************************************************************************/ +static int +qla2x00_do_dpc(void *data) +{ + DECLARE_MUTEX_LOCKED(sem); + scsi_qla_host_t *ha; + fc_port_t *fcport; + os_lun_t *q; + srb_t *sp; + uint8_t status; + unsigned long flags = 0; + struct list_head *list, *templist; + int dead_cnt, online_cnt; + int retry_cmds = 0; + uint16_t next_loopid; + int t; + os_tgt_t *tq; + + ha = (scsi_qla_host_t *)data; + + lock_kernel(); + + daemonize("%s_dpc", ha->host_str); + allow_signal(SIGHUP); + + ha->dpc_wait = &sem; + + set_user_nice(current, -20); + + unlock_kernel(); + + complete(&ha->dpc_inited); + + while (1) { + DEBUG3(printk("qla2x00: DPC handler sleeping\n")); + + if (down_interruptible(&sem)) + break; + + if (ha->dpc_should_die) + break; + + DEBUG3(printk("qla2x00: DPC handler waking up\n")); + + /* Initialization not yet finished. Don't do anything yet. */ + if (!ha->flags.init_done || ha->dpc_active) + continue; + + DEBUG3(printk("scsi(%ld): DPC handler\n", ha->host_no)); + + ha->dpc_active = 1; + + if (!list_empty(&ha->done_queue)) + qla2x00_done(ha); + + /* Process commands in retry queue */ + if (test_and_clear_bit(PORT_RESTART_NEEDED, &ha->dpc_flags)) { + DEBUG(printk("scsi(%ld): DPC checking retry_q. " + "total=%d\n", + ha->host_no, ha->retry_q_cnt)); + + spin_lock_irqsave(&ha->list_lock, flags); + dead_cnt = online_cnt = 0; + list_for_each_safe(list, templist, &ha->retry_queue) { + sp = list_entry(list, srb_t, list); + q = sp->lun_queue; + DEBUG3(printk("scsi(%ld): pid=%ld sp=%p, " + "spflags=0x%x, q_flag= 0x%lx\n", + ha->host_no, sp->cmd->serial_number, sp, + sp->flags, q->q_flag)); + + if (q == NULL) + continue; + fcport = q->fclun->fcport; + + if (atomic_read(&fcport->state) == + FCS_DEVICE_DEAD || + atomic_read(&fcport->ha->loop_state) == LOOP_DEAD) { + + __del_from_retry_queue(ha, sp); + sp->cmd->result = DID_NO_CONNECT << 16; + if (atomic_read(&fcport->ha->loop_state) == + LOOP_DOWN) + sp->err_id = SRB_ERR_LOOP; + else + sp->err_id = SRB_ERR_PORT; + sp->cmd->host_scribble = + (unsigned char *) NULL; + __add_to_done_queue(ha, sp); + dead_cnt++; + } else if (atomic_read(&fcport->state) != + FCS_DEVICE_LOST) { + + __del_from_retry_queue(ha, sp); + sp->cmd->result = DID_BUS_BUSY << 16; + sp->cmd->host_scribble = + (unsigned char *) NULL; + __add_to_done_queue(ha, sp); + online_cnt++; + } + } /* list_for_each_safe() */ + spin_unlock_irqrestore(&ha->list_lock, flags); + + DEBUG(printk("scsi(%ld): done processing retry queue " + "- dead=%d, online=%d\n ", + ha->host_no, dead_cnt, online_cnt)); + } + + /* Process commands in scsi retry queue */ + if (test_and_clear_bit(SCSI_RESTART_NEEDED, &ha->dpc_flags)) { + /* + * Any requests we want to delay for some period is put + * in the scsi retry queue with a delay added. The + * timer will schedule a "scsi_restart_needed" every + * second as long as there are requests in the scsi + * queue. + */ + DEBUG(printk("scsi(%ld): DPC checking scsi " + "retry_q.total=%d\n", + ha->host_no, ha->scsi_retry_q_cnt)); + + online_cnt = 0; + spin_lock_irqsave(&ha->list_lock, flags); + list_for_each_safe(list, templist, + &ha->scsi_retry_queue) { + + sp = list_entry(list, srb_t, list); + q = sp->lun_queue; + tq = sp->tgt_queue; + + DEBUG3(printk("scsi(%ld): scsi_retry_q: " + "pid=%ld sp=%p, spflags=0x%x, " + "q_flag= 0x%lx,q_state=%d\n", + ha->host_no, sp->cmd->serial_number, + sp, sp->flags, q->q_flag, q->q_state)); + + /* Was this lun suspended */ + if (q->q_state != LUN_STATE_WAIT) { + online_cnt++; + __del_from_scsi_retry_queue(ha, sp); + + if (test_bit(TQF_RETRY_CMDS, + &tq->flags)) { + qla2x00_extend_timeout(sp->cmd, + (sp->cmd->timeout_per_command / HZ) - QLA_CMD_TIMER_DELTA); + __add_to_pending_queue(ha, sp); + retry_cmds++; + } else + __add_to_retry_queue(ha, sp); + } + + /* Was this command suspended for N secs */ + if (sp->delay != 0) { + sp->delay--; + if (sp->delay == 0) { + online_cnt++; + __del_from_scsi_retry_queue( + ha, sp); + __add_to_retry_queue(ha,sp); + } + } + } + spin_unlock_irqrestore(&ha->list_lock, flags); + + /* Clear all Target Unsuspended bits */ + for (t = 0; t < ha->max_targets; t++) { + if ((tq = ha->otgt[t]) == NULL) + continue; + + if (test_bit(TQF_RETRY_CMDS, &tq->flags)) + clear_bit(TQF_RETRY_CMDS, &tq->flags); + } + if (retry_cmds) + qla2x00_next(ha); + + DEBUG(if (online_cnt > 0)) + DEBUG(printk("scsi(%ld): dpc() found scsi reqs to " + "restart= %d\n", + ha->host_no, online_cnt)); + } + + if (ha->flags.mbox_busy) { + if (!list_empty(&ha->done_queue)) + qla2x00_done(ha); + + ha->dpc_active = 0; + continue; + } + + if (test_and_clear_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) { + + DEBUG(printk("scsi(%ld): dpc: sched " + "qla2x00_abort_isp ha = %p\n", + ha->host_no, ha)); + if (!(test_and_set_bit(ABORT_ISP_ACTIVE, + &ha->dpc_flags))) { + + if (qla2x00_abort_isp(ha)) { + /* failed. retry later */ + set_bit(ISP_ABORT_NEEDED, + &ha->dpc_flags); + } + clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags); + } + DEBUG(printk("scsi(%ld): dpc: qla2x00_abort_isp end\n", + ha->host_no)); + } + + if (test_and_clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) && + (!(test_and_set_bit(RESET_ACTIVE, &ha->dpc_flags)))) { + + DEBUG(printk("scsi(%ld): qla2x00_reset_marker()\n", + ha->host_no)); + + qla2x00_rst_aen(ha); + clear_bit(RESET_ACTIVE, &ha->dpc_flags); + } + + /* Retry each device up to login retry count */ + if ((test_and_clear_bit(RELOGIN_NEEDED, &ha->dpc_flags)) && + !test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) && + atomic_read(&ha->loop_state) != LOOP_DOWN) { + + DEBUG(printk("scsi(%ld): qla2x00_port_login()\n", + ha->host_no)); + + next_loopid = 0; + list_for_each_entry(fcport, &ha->fcports, list) { + if (fcport->port_type != FCT_TARGET) + continue; + + /* + * If the port is not ONLINE then try to login + * to it if we haven't run out of retries. + */ + if (atomic_read(&fcport->state) != FCS_ONLINE && + fcport->login_retry) { + + fcport->login_retry--; + if (fcport->flags & FCF_FABRIC_DEVICE) { + if (fcport->flags & + FCF_TAPE_PRESENT) + qla2x00_fabric_logout( + ha, + fcport->loop_id); + status = qla2x00_fabric_login( + ha, fcport, &next_loopid); + } else + status = + qla2x00_local_device_login( + ha, fcport->loop_id); + + if (status == QLA_SUCCESS) { + fcport->old_loop_id = fcport->loop_id; + + DEBUG(printk("scsi(%ld): port login OK: logged in ID 0x%x\n", + ha->host_no, fcport->loop_id)); + + fcport->port_login_retry_count = + ha->port_down_retry_count * PORT_RETRY_TIME; + atomic_set(&fcport->state, FCS_ONLINE); + atomic_set(&fcport->port_down_timer, + ha->port_down_retry_count * PORT_RETRY_TIME); + + fcport->login_retry = 0; + } else if (status == 1) { + set_bit(RELOGIN_NEEDED, &ha->dpc_flags); + /* retry the login again */ + DEBUG(printk("scsi(%ld): Retrying %d login again loop_id 0x%x\n", + ha->host_no, + fcport->login_retry, fcport->loop_id)); + } else { + fcport->login_retry = 0; + } + } + if (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) + break; + } + DEBUG(printk("scsi(%ld): qla2x00_port_login - end\n", + ha->host_no)); + } + + if ((test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags)) && + atomic_read(&ha->loop_state) != LOOP_DOWN) { + + clear_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags); + DEBUG(printk("scsi(%ld): qla2x00_login_retry()\n", + ha->host_no)); + + set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags); + + DEBUG(printk("scsi(%ld): qla2x00_login_retry - end\n", + ha->host_no)); + } + + if (test_and_clear_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) { + + DEBUG(printk("scsi(%ld): qla2x00_loop_resync()\n", + ha->host_no)); + + if (!(test_and_set_bit(LOOP_RESYNC_ACTIVE, + &ha->dpc_flags))) { + + qla2x00_loop_resync(ha); + + clear_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags); + } + + DEBUG(printk("scsi(%ld): qla2x00_loop_resync - end\n", + ha->host_no)); + } + + + if (test_bit(RESTART_QUEUES_NEEDED, &ha->dpc_flags)) { + DEBUG(printk("scsi(%ld): qla2x00_restart_queues()\n", + ha->host_no)); + + qla2x00_restart_queues(ha, 0); + + DEBUG(printk("scsi(%ld): qla2x00_restart_queues - end\n", + ha->host_no)); + } + + if (test_bit(ABORT_QUEUES_NEEDED, &ha->dpc_flags)) { + + DEBUG(printk("scsi(%ld): qla2x00_abort_queues()\n", + ha->host_no)); + + qla2x00_abort_queues(ha, 0); + + DEBUG(printk("scsi(%ld): qla2x00_abort_queues - end\n", + ha->host_no)); + } + + if (test_and_clear_bit(FCPORT_RESCAN_NEEDED, &ha->dpc_flags)) { + + DEBUG(printk("scsi(%ld): Rescan flagged fcports...\n", + ha->host_no)); + + qla2x00_rescan_fcports(ha); + + DEBUG(printk("scsi(%ld): Rescan flagged fcports..." + "end.\n", + ha->host_no)); + } + + + if (!ha->interrupts_on) + qla2x00_enable_intrs(ha); + + if (!list_empty(&ha->done_queue)) + qla2x00_done(ha); + + ha->dpc_active = 0; + } /* End of while(1) */ + + DEBUG(printk("scsi(%ld): DPC handler exiting\n", ha->host_no)); + + /* + * Make sure that nobody tries to wake us up again. + */ + ha->dpc_wait = NULL; + ha->dpc_active = 0; + + complete_and_exit(&ha->dpc_exited, 0); +} + +/* + * qla2x00_abort_queues + * Abort all commands on queues on device + * + * Input: + * ha = adapter block pointer. + * + * Context: + * Interrupt context. + */ +void +qla2x00_abort_queues(scsi_qla_host_t *ha, uint8_t doneqflg) +{ + + srb_t *sp; + struct list_head *list, *temp; + unsigned long flags; + + clear_bit(ABORT_QUEUES_NEEDED, &ha->dpc_flags); + + /* Return all commands device queues. */ + spin_lock_irqsave(&ha->list_lock,flags); + list_for_each_safe(list, temp, &ha->pending_queue) { + sp = list_entry(list, srb_t, list); + + if (sp->flags & SRB_ABORTED) + continue; + + /* Remove srb from LUN queue. */ + __del_from_pending_queue(ha, sp); + + /* Set ending status. */ + sp->cmd->result = DID_BUS_BUSY << 16; + + __add_to_done_queue(ha, sp); + } + spin_unlock_irqrestore(&ha->list_lock, flags); +} + +/* +* qla2x00_rst_aen +* Processes asynchronous reset. +* +* Input: +* ha = adapter block pointer. +*/ +static void +qla2x00_rst_aen(scsi_qla_host_t *ha) +{ + if (ha->flags.online && !ha->flags.reset_active && + !atomic_read(&ha->loop_down_timer) && + !(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags))) { + do { + clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags); + + /* + * Issue marker command only when we are going to start + * the I/O. + */ + ha->marker_needed = 1; + } while (!atomic_read(&ha->loop_down_timer) && + (test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags))); + } +} + + +/* + * This routine will allocate SP from the free queue + * input: + * scsi_qla_host_t * + * output: + * srb_t * or NULL + */ +static srb_t * +qla2x00_get_new_sp(scsi_qla_host_t *ha) +{ + srb_t *sp; + + sp = mempool_alloc(ha->srb_mempool, GFP_ATOMIC); + if (sp) + atomic_set(&sp->ref_count, 1); + return (sp); +} + +/************************************************************************** +* qla2x00_timer +* +* Description: +* One second timer +* +* Context: Interrupt +***************************************************************************/ +static void +qla2x00_timer(scsi_qla_host_t *ha) +{ + int t,l; + unsigned long cpu_flags = 0; + fc_port_t *fcport; + os_lun_t *lq; + os_tgt_t *tq; + int start_dpc = 0; + int index; + srb_t *sp; + + /* + * We try and restart any request in the retry queue every second. + */ + if (!list_empty(&ha->retry_queue)) { + set_bit(PORT_RESTART_NEEDED, &ha->dpc_flags); + start_dpc++; + } + + /* + * We try and restart any request in the scsi_retry queue every second. + */ + if (!list_empty(&ha->scsi_retry_queue)) { + set_bit(SCSI_RESTART_NEEDED, &ha->dpc_flags); + start_dpc++; + } + + /* + * Ports - Port down timer. + * + * Whenever, a port is in the LOST state we start decrementing its port + * down timer every second until it reaches zero. Once it reaches zero + * the port it marked DEAD. + */ + t = 0; + list_for_each_entry(fcport, &ha->fcports, list) { + if (fcport->port_type != FCT_TARGET) + continue; + + if (atomic_read(&fcport->state) == FCS_DEVICE_LOST) { + + if (atomic_read(&fcport->port_down_timer) == 0) + continue; + + if (atomic_dec_and_test(&fcport->port_down_timer) != 0) + atomic_set(&fcport->state, FCS_DEVICE_DEAD); + + DEBUG(printk("scsi(%ld): fcport-%d - port retry count: " + "%d remainning\n", + ha->host_no, + t, atomic_read(&fcport->port_down_timer))); + } + t++; + } /* End of for fcport */ + + /* + * LUNS - lun suspend timer. + * + * Whenever, a lun is suspended the timer starts decrementing its + * suspend timer every second until it reaches zero. Once it reaches + * zero the lun retry count is decremented. + */ + + /* + * FIXME(dg) - Need to convert this linear search of luns into a search + * of a list of suspended luns. + */ + for (t = 0; t < ha->max_targets; t++) { + if ((tq = ha->otgt[t]) == NULL) + continue; + + for (l = 0; l < ha->max_luns; l++) { + if ((lq = (os_lun_t *) tq->olun[l]) == NULL) + continue; + + spin_lock_irqsave(&lq->q_lock, cpu_flags); + if (lq->q_state == LUN_STATE_WAIT && + atomic_read(&lq->q_timer) != 0) { + + if (atomic_dec_and_test(&lq->q_timer) != 0) { + /* + * A delay should immediately + * transition to a READY state + */ + if (test_and_clear_bit(LUN_EXEC_DELAYED, + &lq->q_flag)) { + lq->q_state = LUN_STATE_READY; + } + else { + lq->q_count++; + if (lq->q_count == lq->q_max) + lq->q_state = + LUN_STATE_TIMEOUT; + else + lq->q_state = + LUN_STATE_RUN; + } + } + DEBUG3(printk("scsi(%ld): lun%d - timer %d, " + "count=%d, max=%d, state=%d\n", + ha->host_no, + l, + atomic_read(&lq->q_timer), + lq->q_count, lq->q_max, lq->q_state)); + } + spin_unlock_irqrestore(&lq->q_lock, cpu_flags); + } /* End of for luns */ + } /* End of for targets */ + + /* Loop down handler. */ + if (atomic_read(&ha->loop_down_timer) > 0 && + !(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags)) && ha->flags.online) { + + if (atomic_read(&ha->loop_down_timer) == + ha->loop_down_abort_time) { + + DEBUG(printk("scsi(%ld): Loop Down - aborting the " + "queues before time expire\n", + ha->host_no)); + + if (!IS_QLA2100(ha) && ha->link_down_timeout) + atomic_set(&ha->loop_state, LOOP_DEAD); + + /* Schedule an ISP abort to return any tape commands. */ + spin_lock_irqsave(&ha->hardware_lock, cpu_flags); + for (index = 1; index < MAX_OUTSTANDING_COMMANDS; + index++) { + sp = ha->outstanding_cmds[index]; + if (!sp) + continue; + if (!(sp->fclun->fcport->flags & + FCF_TAPE_PRESENT)) + continue; + + set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); + break; + } + spin_unlock_irqrestore(&ha->hardware_lock, cpu_flags); + + set_bit(ABORT_QUEUES_NEEDED, &ha->dpc_flags); + start_dpc++; + } + + /* if the loop has been down for 4 minutes, reinit adapter */ + if (atomic_dec_and_test(&ha->loop_down_timer) != 0) { + DEBUG(printk("scsi(%ld): Loop down exceed 4 mins - " + "restarting queues.\n", + ha->host_no)); + + set_bit(RESTART_QUEUES_NEEDED, &ha->dpc_flags); + start_dpc++; + + if (!(ha->device_flags & DFLG_NO_CABLE)) { + DEBUG(printk("scsi(%ld): Loop down - " + "aborting ISP.\n", + ha->host_no)); + qla_printk(KERN_WARNING, ha, + "Loop down - aborting ISP.\n"); + + set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); + } + } + DEBUG3(printk("scsi(%ld): Loop Down - seconds remainning %d\n", + ha->host_no, + atomic_read(&ha->loop_down_timer))); + } + + /* + * Done Q Handler -- dgFIXME This handler will kick off doneq if we + * haven't process it in 2 seconds. + */ + if (!list_empty(&ha->done_queue)) + qla2x00_done(ha); + + + /* Schedule the DPC routine if needed */ + if ((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) || + test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || + start_dpc || + test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags) || + test_bit(RELOGIN_NEEDED, &ha->dpc_flags)) && + ha->dpc_wait && !ha->dpc_active) { + + up(ha->dpc_wait); + } + + qla2x00_restart_timer(ha, WATCH_INTERVAL); +} + +/* + * qla2x00_extend_timeout + * This routine will extend the timeout to the specified value. + * + * Input: + * cmd = SCSI command structure + * + * Returns: + * None. + */ +void +qla2x00_extend_timeout(struct scsi_cmnd *cmd, int timeout) +{ + srb_t *sp = (srb_t *) CMD_SP(cmd); + u_long our_jiffies = (timeout * HZ) + jiffies; + + sp->ext_history= 0; + sp->e_start = jiffies; + if (cmd->eh_timeout.function) { + mod_timer(&cmd->eh_timeout,our_jiffies); + sp->ext_history |= 1; + } + if (sp->timer.function != NULL) { + /* + * Our internal timer should timeout before the midlayer has a + * chance begin the abort process + */ + mod_timer(&sp->timer,our_jiffies - (QLA_CMD_TIMER_DELTA * HZ)); + + sp->ext_history |= 2; + } +} + +/************************************************************************** +* qla2x00_cmd_timeout +* +* Description: +* Handles the command if it times out in any state. +* +* Input: +* sp - pointer to validate +* +* Returns: +* None. +* Note:Need to add the support for if( sp->state == SRB_FAILOVER_STATE). +**************************************************************************/ +void +qla2x00_cmd_timeout(srb_t *sp) +{ + int t, l; + int processed; + scsi_qla_host_t *vis_ha, *dest_ha; + struct scsi_cmnd *cmd; + unsigned long flags, cpu_flags; + fc_port_t *fcport; + + cmd = sp->cmd; + vis_ha = (scsi_qla_host_t *)cmd->device->host->hostdata; + + DEBUG3(printk("cmd_timeout: Entering sp->state = %x\n", sp->state)); + + t = cmd->device->id; + l = cmd->device->lun; + fcport = sp->fclun->fcport; + dest_ha = sp->ha; + + /* + * If IO is found either in retry Queue + * OR in Lun Queue + * Return this IO back to host + */ + spin_lock_irqsave(&vis_ha->list_lock, flags); + processed = 0; + if (sp->state == SRB_PENDING_STATE) { + __del_from_pending_queue(vis_ha, sp); + DEBUG2(printk("scsi(%ld): Found in Pending queue pid %ld, " + "State = %x., fcport state=%d sjiffs=%lx njiffs=%lx\n", + vis_ha->host_no, cmd->serial_number, sp->state, + atomic_read(&fcport->state), sp->r_start, jiffies)); + + /* + * If FC_DEVICE is marked as dead return the cmd with + * DID_NO_CONNECT status. Otherwise set the host_byte to + * DID_BUS_BUSY to let the OS retry this cmd. + */ + if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD || + atomic_read(&fcport->ha->loop_state) == LOOP_DEAD) { + cmd->result = DID_NO_CONNECT << 16; + if (atomic_read(&fcport->ha->loop_state) == LOOP_DOWN) + sp->err_id = SRB_ERR_LOOP; + else + sp->err_id = SRB_ERR_PORT; + } else { + cmd->result = DID_BUS_BUSY << 16; + } + __add_to_done_queue(vis_ha, sp); + processed++; + } + spin_unlock_irqrestore(&vis_ha->list_lock, flags); + + if (processed) { + qla2x00_done(vis_ha); + return; + } + + spin_lock_irqsave(&dest_ha->list_lock, flags); + if ((sp->state == SRB_RETRY_STATE) || + (sp->state == SRB_SCSI_RETRY_STATE)) { + + DEBUG2(printk("scsi(%ld): Found in (Scsi) Retry queue or " + "failover Q pid %ld, State = %x., fcport state=%d " + "jiffies=%lx retried=%d\n", + dest_ha->host_no, cmd->serial_number, sp->state, + atomic_read(&fcport->state), jiffies, cmd->retries)); + + if ((sp->state == SRB_RETRY_STATE)) { + __del_from_retry_queue(dest_ha, sp); + } else if ((sp->state == SRB_SCSI_RETRY_STATE)) { + __del_from_scsi_retry_queue(dest_ha, sp); + } + + /* + * If FC_DEVICE is marked as dead return the cmd with + * DID_NO_CONNECT status. Otherwise set the host_byte to + * DID_BUS_BUSY to let the OS retry this cmd. + */ + if ((atomic_read(&fcport->state) == FCS_DEVICE_DEAD) || + atomic_read(&dest_ha->loop_state) == LOOP_DEAD) { + qla2x00_extend_timeout(cmd, EXTEND_CMD_TIMEOUT); + cmd->result = DID_NO_CONNECT << 16; + if (atomic_read(&dest_ha->loop_state) == LOOP_DOWN) + sp->err_id = SRB_ERR_LOOP; + else + sp->err_id = SRB_ERR_PORT; + } else { + cmd->result = DID_BUS_BUSY << 16; + } + + __add_to_done_queue(dest_ha, sp); + processed++; + } + spin_unlock_irqrestore(&dest_ha->list_lock, flags); + + if (processed) { + qla2x00_done(dest_ha); + return; + } + + spin_lock_irqsave(&dest_ha->list_lock, cpu_flags); + if (sp->state == SRB_DONE_STATE) { + /* IO in done_q -- leave it */ + DEBUG(printk("scsi(%ld): Found in Done queue pid %ld sp=%p.\n", + dest_ha->host_no, cmd->serial_number, sp)); + } else if (sp->state == SRB_SUSPENDED_STATE) { + DEBUG(printk("scsi(%ld): Found SP %p in suspended state " + "- pid %ld:\n", + dest_ha->host_no, sp, cmd->serial_number)); + DEBUG(qla2x00_dump_buffer((uint8_t *)sp, sizeof(srb_t));) + } else if (sp->state == SRB_ACTIVE_STATE) { + /* + * IO is with ISP find the command in our active list. + */ + spin_unlock_irqrestore(&dest_ha->list_lock, cpu_flags); + spin_lock_irqsave(&dest_ha->hardware_lock, flags); + if (sp == dest_ha->outstanding_cmds[ + (unsigned long)sp->cmd->host_scribble]) { + + DEBUG(printk("cmd_timeout: Found in ISP \n")); + + if (sp->flags & SRB_TAPE) { + /* + * We cannot allow the midlayer error handler + * to wakeup and begin the abort process. + * Extend the timer so that the firmware can + * properly return the IOCB. + */ + DEBUG(printk("cmd_timeout: Extending timeout " + "of FCP2 tape command!\n")); + qla2x00_extend_timeout(sp->cmd, + EXTEND_CMD_TIMEOUT); + } + sp->state = SRB_ACTIVE_TIMEOUT_STATE; + spin_unlock_irqrestore(&dest_ha->hardware_lock, flags); + } else { + spin_unlock_irqrestore(&dest_ha->hardware_lock, flags); + printk(KERN_INFO + "qla_cmd_timeout: State indicates it is with " + "ISP, But not in active array\n"); + } + spin_lock_irqsave(&dest_ha->list_lock, cpu_flags); + } else if (sp->state == SRB_ACTIVE_TIMEOUT_STATE) { + DEBUG(printk("qla2100%ld: Found in Active timeout state" + "pid %ld, State = %x., \n", + dest_ha->host_no, + sp->cmd->serial_number, sp->state);) + } else { + /* EMPTY */ + DEBUG2(printk("cmd_timeout%ld: LOST command state = " + "0x%x, sp=%p\n", + vis_ha->host_no, sp->state,sp);) + + qla_printk(KERN_INFO, vis_ha, + "cmd_timeout: LOST command state = 0x%x\n", sp->state); + } + spin_unlock_irqrestore(&dest_ha->list_lock, cpu_flags); + + DEBUG3(printk("cmd_timeout: Leaving\n");) +} + +/************************************************************************** +* qla2x00_done +* Process completed commands. +* +* Input: +* old_ha = adapter block pointer. +* +**************************************************************************/ +void +qla2x00_done(scsi_qla_host_t *old_ha) +{ + os_lun_t *lq; + struct scsi_cmnd *cmd; + unsigned long flags = 0; + scsi_qla_host_t *ha; + scsi_qla_host_t *vis_ha; + int send_marker_once = 0; + srb_t *sp, *sptemp; + LIST_HEAD(local_sp_list); + + /* + * Get into local queue such that we do not wind up calling done queue + * tasklet for the same IOs from DPC or any other place. + */ + spin_lock_irqsave(&old_ha->list_lock, flags); + list_splice_init(&old_ha->done_queue, &local_sp_list); + spin_unlock_irqrestore(&old_ha->list_lock, flags); + + /* + * All done commands are in the local queue, now do the call back. + */ + list_for_each_entry_safe(sp, sptemp, &local_sp_list, list) { + old_ha->done_q_cnt--; + sp->state = SRB_NO_QUEUE_STATE; + + /* remove command from local list */ + list_del_init(&sp->list); + + cmd = sp->cmd; + if (cmd == NULL) + continue; + + vis_ha = (scsi_qla_host_t *)cmd->device->host->hostdata; + lq = sp->lun_queue; + ha = sp->ha; + + if (sp->flags & SRB_DMA_VALID) { + sp->flags &= ~SRB_DMA_VALID; + + /* Release memory used for this I/O */ + if (cmd->use_sg) { + pci_unmap_sg(ha->pdev, cmd->request_buffer, + cmd->use_sg, cmd->sc_data_direction); + } else if (cmd->request_bufflen) { + pci_unmap_page(ha->pdev, sp->dma_handle, + cmd->request_bufflen, + cmd->sc_data_direction); + } + } + + + switch (host_byte(cmd->result)) { + case DID_OK: + case DID_ERROR: + break; + + case DID_RESET: + /* + * Set marker needed, so we don't have to + * send multiple markers + */ + if (!send_marker_once) { + ha->marker_needed = 1; + send_marker_once++; + } + + /* + * WORKAROUND + * + * A backdoor device-reset requires different + * error handling. This code differentiates + * between normal error handling and the + * backdoor method. + * + */ + if (ha->host->eh_active != EH_ACTIVE) + cmd->result = DID_BUS_BUSY << 16; + break; + + + case DID_ABORT: + sp->flags &= ~SRB_ABORT_PENDING; + sp->flags |= SRB_ABORTED; + + if (sp->flags & SRB_TIMEOUT) + cmd->result = DID_TIME_OUT << 16; + + break; + + default: + DEBUG2(printk("scsi(%ld:%d:%d) %s: did_error " + "= %d, comp-scsi= 0x%x-0x%x pid=%ld.\n", + vis_ha->host_no, + cmd->device->id, cmd->device->lun, + __func__, + host_byte(cmd->result), + CMD_COMPL_STATUS(cmd), + CMD_SCSI_STATUS(cmd), cmd->serial_number)); + break; + } + + /* + * Call the mid-level driver interrupt handler -- via sp_put() + */ + sp_put(ha, sp); + } /* end of while */ +} + +/* + * qla2x00_process_response_queue_in_zio_mode + * Process response queue completion as fast as possible + * to achieve Zero Interrupt Opertions-ZIO + * + * Input: + * ha = adapter block pointer. + * + * Context: + * Kernel context. + */ +static inline void +qla2x00_process_response_queue_in_zio_mode(scsi_qla_host_t *ha) +{ + unsigned long flags; + + /* Check for unprocessed commands in response queue. */ + if (!ha->flags.process_response_queue) + return; + if (!ha->flags.online) + return; + if (ha->response_ring_ptr->signature == RESPONSE_PROCESSED) + return; + + spin_lock_irqsave(&ha->hardware_lock,flags); + qla2x00_process_response_queue(ha); + spin_unlock_irqrestore(&ha->hardware_lock, flags); +} + +/* + * qla2x00_next + * Retrieve and process next job in the LUN queue. + * + * Input: + * tq = SCSI target queue pointer. + * lq = SCSI LUN queue pointer. + * TGT_LOCK must be already obtained. + * + * Output: + * Releases TGT_LOCK upon exit. + * + * Context: + * Kernel/Interrupt context. + * + * Note: This routine will always try to start I/O from visible HBA. + */ +void +qla2x00_next(scsi_qla_host_t *vis_ha) +{ + int rval; + unsigned long flags; + scsi_qla_host_t *dest_ha; + fc_port_t *fcport; + srb_t *sp, *sptemp; + LIST_HEAD(local_sp_list); + + dest_ha = NULL; + + spin_lock_irqsave(&vis_ha->list_lock, flags); + list_splice_init(&vis_ha->pending_queue, &local_sp_list); + vis_ha->qthreads = 0; + spin_unlock_irqrestore(&vis_ha->list_lock, flags); + + list_for_each_entry_safe(sp, sptemp, &local_sp_list, list) { + list_del_init(&sp->list); + sp->state = SRB_NO_QUEUE_STATE; + + fcport = sp->fclun->fcport; + dest_ha = fcport->ha; + + /* If device is dead then send request back to OS */ + if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD) { + sp->cmd->result = DID_NO_CONNECT << 16; + if (atomic_read(&dest_ha->loop_state) == LOOP_DOWN) + sp->err_id = SRB_ERR_LOOP; + else + sp->err_id = SRB_ERR_PORT; + + DEBUG3(printk("scsi(%ld): loop/port is down - pid=%ld, " + "sp=%p err_id=%d loopid=0x%x queued to dest HBA " + "scsi%ld.\n", dest_ha->host_no, + sp->cmd->serial_number, sp, sp->err_id, + fcport->loop_id, dest_ha->host_no)); + /* + * Initiate a failover - done routine will initiate. + */ + add_to_done_queue(vis_ha, sp); + + continue; + } + + /* + * SCSI Kluge: Whenever, we need to wait for an event such as + * loop down (i.e. loop_down_timer ) or port down (i.e. LUN + * request qeueue is suspended) then we will recycle new + * commands back to the SCSI layer. We do this because this is + * normally a temporary condition and we don't want the + * mid-level scsi.c driver to get upset and start aborting + * commands. The timeout value is extracted from the command + * minus 1-second and put on a retry queue (watchdog). Once the + * command timeout it is returned to the mid-level with a BUSY + * status, so the mid-level will retry it. This process + * continues until the LOOP DOWN time expires or the condition + * goes away. + */ + if (!(sp->flags & (SRB_IOCTL | SRB_TAPE)) && + (atomic_read(&fcport->state) != FCS_ONLINE || + test_bit(ABORT_ISP_ACTIVE, &dest_ha->dpc_flags) || + atomic_read(&dest_ha->loop_state) != LOOP_READY)) { + + DEBUG3(printk("scsi(%ld): pid=%ld port=0x%x state=%d " + "loop state=%d, loop counter=0x%x " + "dpc_flags=0x%lx\n", sp->cmd->serial_number, + dest_ha->host_no, fcport->loop_id, + atomic_read(&fcport->state), + atomic_read(&dest_ha->loop_state), + atomic_read(&dest_ha->loop_down_timer), + dest_ha->dpc_flags)); + + qla2x00_extend_timeout(sp->cmd, EXTEND_CMD_TIMEOUT); + add_to_retry_queue(vis_ha, sp); + + continue; + } + + /* + * If this request's lun is suspended then put the request on + * the scsi_retry queue. + */ + if (!(sp->flags & (SRB_IOCTL | SRB_TAPE)) && + sp->lun_queue->q_state == LUN_STATE_WAIT) { + DEBUG3(printk("scsi(%ld): lun wait state - pid=%ld, " + "opcode=%d, allowed=%d, retries=%d\n", + dest_ha->host_no, + sp->cmd->serial_number, + sp->cmd->cmnd[0], + sp->cmd->allowed, + sp->cmd->retries)); + + add_to_scsi_retry_queue(vis_ha, sp); + + continue; + } + + sp->lun_queue->io_cnt++; + + rval = qla2x00_start_scsi(sp); + if (rval != QLA_SUCCESS) { + /* Place request back on top of device queue */ + /* add to the top of queue */ + add_to_pending_queue_head(vis_ha, sp); + + sp->lun_queue->io_cnt--; + } + } + + if (!IS_QLA2100(vis_ha) && !IS_QLA2200(vis_ha)) { + /* Process response_queue if ZIO support is enabled*/ + qla2x00_process_response_queue_in_zio_mode(vis_ha); + + } +} + +/* XXX(hch): crude hack to emulate a down_timeout() */ +int +qla2x00_down_timeout(struct semaphore *sema, unsigned long timeout) +{ + const unsigned int step = HZ/10; + + do { + if (!down_trylock(sema)) + return 0; + set_current_state(TASK_INTERRUPTIBLE); + if (schedule_timeout(step)) + break; + } while ((timeout -= step) > 0); + + return -ETIMEDOUT; +} + +static void +qla2xxx_get_port_id(struct scsi_target *starget) +{ + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + scsi_qla_host_t *ha = to_qla_host(shost); + struct fc_port *fc; + + list_for_each_entry(fc, &ha->fcports, list) { + if (fc->os_target_id == starget->id) { + fc_starget_port_id(starget) = fc->d_id.b.domain << 16 | + fc->d_id.b.area << 8 | + fc->d_id.b.al_pa; + return; + } + } + fc_starget_port_id(starget) = -1; +} + +static void +qla2xxx_get_port_name(struct scsi_target *starget) +{ + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + scsi_qla_host_t *ha = to_qla_host(shost); + struct fc_port *fc; + + list_for_each_entry(fc, &ha->fcports, list) { + if (fc->os_target_id == starget->id) { + fc_starget_port_name(starget) = + __be64_to_cpu(*(uint64_t *)fc->port_name); + return; + } + } + fc_starget_port_name(starget) = -1; +} + +static void +qla2xxx_get_node_name(struct scsi_target *starget) +{ + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + scsi_qla_host_t *ha = to_qla_host(shost); + struct fc_port *fc; + + list_for_each_entry(fc, &ha->fcports, list) { + if (fc->os_target_id == starget->id) { + fc_starget_node_name(starget) = + __be64_to_cpu(*(uint64_t *)fc->node_name); + return; + } + } + fc_starget_node_name(starget) = -1; +} + +static struct fc_function_template qla2xxx_transport_functions = { + .get_starget_port_id = qla2xxx_get_port_id, + .show_starget_port_id = 1, + .get_starget_port_name = qla2xxx_get_port_name, + .show_starget_port_name = 1, + .get_starget_node_name = qla2xxx_get_node_name, + .show_starget_node_name = 1, +}; + +/** + * qla2x00_module_init - Module initialization. + **/ +static int __init +qla2x00_module_init(void) +{ + /* Allocate cache for SRBs. */ + sprintf(srb_cachep_name, "qla2xxx_srbs"); + srb_cachep = kmem_cache_create(srb_cachep_name, sizeof(srb_t), 0, + SLAB_HWCACHE_ALIGN, NULL, NULL); + if (srb_cachep == NULL) { + printk(KERN_ERR + "qla2xxx: Unable to allocate SRB cache...Failing load!\n"); + return -ENOMEM; + } + + /* Derive version string. */ + strcpy(qla2x00_version_str, QLA2XXX_VERSION); +#if DEBUG_QLA2100 + strcat(qla2x00_version_str, "-debug"); +#endif + + qla2xxx_transport_template = fc_attach_transport(&qla2xxx_transport_functions); + if (!qla2xxx_transport_template) + return -ENODEV; + + printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n"); + return 0; +} + +/** + * qla2x00_module_exit - Module cleanup. + **/ +static void __exit +qla2x00_module_exit(void) +{ + /* Free SRBs cache. */ + if (srb_cachep != NULL) { + if (kmem_cache_destroy(srb_cachep) != 0) { + printk(KERN_ERR + "qla2xxx: Unable to free SRB cache...Memory pools " + "still active?\n"); + } + srb_cachep = NULL; + } + + fc_release_transport(qla2xxx_transport_template); +} + +module_init(qla2x00_module_init); +module_exit(qla2x00_module_exit); + +MODULE_AUTHOR("QLogic Corporation"); +MODULE_DESCRIPTION("QLogic Fibre Channel HBA Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(QLA2XXX_VERSION); |