summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla2xxx/qla_os.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_os.c')
-rw-r--r--drivers/scsi/qla2xxx/qla_os.c117
1 files changed, 71 insertions, 46 deletions
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 9000659bfbc..8982978c42f 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -79,7 +79,7 @@ module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR);
MODULE_PARM_DESC(ql2xloginretrycount,
"Specify an alternate value for the NVRAM login retry count.");
-int ql2xfwloadbin;
+int ql2xfwloadbin=1;
module_param(ql2xfwloadbin, int, S_IRUGO|S_IRUSR);
MODULE_PARM_DESC(ql2xfwloadbin,
"Load ISP2xxx firmware image via hotplug.");
@@ -88,6 +88,12 @@ static void qla2x00_free_device(scsi_qla_host_t *);
static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
+int ql2xfdmienable;
+module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(ql2xfdmienable,
+ "Enables FDMI registratons "
+ "Default is 0 - no FDMI. 1 - perfom FDMI.");
+
/*
* SCSI host template entry points
*/
@@ -105,6 +111,9 @@ static int qla2xxx_eh_host_reset(struct scsi_cmnd *);
static int qla2x00_loop_reset(scsi_qla_host_t *ha);
static int qla2x00_device_reset(scsi_qla_host_t *, fc_port_t *);
+static int qla2x00_change_queue_depth(struct scsi_device *, int);
+static int qla2x00_change_queue_type(struct scsi_device *, int);
+
static struct scsi_host_template qla2x00_driver_template = {
.module = THIS_MODULE,
.name = "qla2xxx",
@@ -119,6 +128,8 @@ static struct scsi_host_template qla2x00_driver_template = {
.slave_alloc = qla2xxx_slave_alloc,
.slave_destroy = qla2xxx_slave_destroy,
+ .change_queue_depth = qla2x00_change_queue_depth,
+ .change_queue_type = qla2x00_change_queue_type,
.this_id = -1,
.cmd_per_lun = 3,
.use_clustering = ENABLE_CLUSTERING,
@@ -129,6 +140,7 @@ static struct scsi_host_template qla2x00_driver_template = {
* which equates to 0x800000 sectors.
*/
.max_sectors = 0xFFFF,
+ .shost_attrs = qla2x00_host_attrs,
};
static struct scsi_host_template qla24xx_driver_template = {
@@ -145,12 +157,15 @@ static struct scsi_host_template qla24xx_driver_template = {
.slave_alloc = qla2xxx_slave_alloc,
.slave_destroy = qla2xxx_slave_destroy,
+ .change_queue_depth = qla2x00_change_queue_depth,
+ .change_queue_type = qla2x00_change_queue_type,
.this_id = -1,
.cmd_per_lun = 3,
.use_clustering = ENABLE_CLUSTERING,
.sg_tablesize = SG_ALL,
.max_sectors = 0xFFFF,
+ .shost_attrs = qla2x00_host_attrs,
};
static struct scsi_transport_template *qla2xxx_transport_template = NULL;
@@ -487,14 +502,13 @@ qc24_fail_command:
static int
qla2x00_eh_wait_on_command(scsi_qla_host_t *ha, struct scsi_cmnd *cmd)
{
-#define ABORT_POLLING_PERIOD HZ
-#define ABORT_WAIT_ITER ((10 * HZ) / (ABORT_POLLING_PERIOD))
+#define ABORT_POLLING_PERIOD 1000
+#define ABORT_WAIT_ITER ((10 * 1000) / (ABORT_POLLING_PERIOD))
unsigned long wait_iter = ABORT_WAIT_ITER;
int ret = QLA_SUCCESS;
while (CMD_SP(cmd)) {
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(ABORT_POLLING_PERIOD);
+ msleep(ABORT_POLLING_PERIOD);
if (--wait_iter)
break;
@@ -1016,7 +1030,7 @@ qla2x00_loop_reset(scsi_qla_host_t *ha)
if (fcport->port_type != FCT_TARGET)
continue;
- status = qla2x00_target_reset(ha, fcport);
+ status = qla2x00_device_reset(ha, fcport);
if (status != QLA_SUCCESS)
break;
}
@@ -1103,6 +1117,28 @@ qla2xxx_slave_destroy(struct scsi_device *sdev)
sdev->hostdata = NULL;
}
+static int
+qla2x00_change_queue_depth(struct scsi_device *sdev, int qdepth)
+{
+ scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
+ return sdev->queue_depth;
+}
+
+static int
+qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type)
+{
+ if (sdev->tagged_supported) {
+ scsi_set_tag_type(sdev, tag_type);
+ if (tag_type)
+ scsi_activate_tcq(sdev, sdev->queue_depth);
+ else
+ scsi_deactivate_tcq(sdev, sdev->queue_depth);
+ } else
+ tag_type = 0;
+
+ return tag_type;
+}
+
/**
* qla2x00_config_dma_addressing() - Configure OS DMA addressing method.
* @ha: HA context
@@ -1113,36 +1149,23 @@ qla2xxx_slave_destroy(struct scsi_device *sdev)
static void
qla2x00_config_dma_addressing(scsi_qla_host_t *ha)
{
- /* Assume 32bit DMA address */
+ /* Assume a 32bit DMA mask. */
ha->flags.enable_64bit_addressing = 0;
- /*
- * Given the two variants pci_set_dma_mask(), allow the compiler to
- * assist in setting the proper dma mask.
- */
- if (sizeof(dma_addr_t) > 4) {
- if (pci_set_dma_mask(ha->pdev, DMA_64BIT_MASK) == 0) {
+ if (!dma_set_mask(&ha->pdev->dev, DMA_64BIT_MASK)) {
+ /* Any upper-dword bits set? */
+ if (MSD(dma_get_required_mask(&ha->pdev->dev)) &&
+ !pci_set_consistent_dma_mask(ha->pdev, DMA_64BIT_MASK)) {
+ /* Ok, a 64bit DMA mask is applicable. */
ha->flags.enable_64bit_addressing = 1;
ha->isp_ops.calc_req_entries = qla2x00_calc_iocbs_64;
ha->isp_ops.build_iocbs = qla2x00_build_scsi_iocbs_64;
-
- if (pci_set_consistent_dma_mask(ha->pdev,
- DMA_64BIT_MASK)) {
- qla_printk(KERN_DEBUG, ha,
- "Failed to set 64 bit PCI consistent mask; "
- "using 32 bit.\n");
- pci_set_consistent_dma_mask(ha->pdev,
- DMA_32BIT_MASK);
- }
- } else {
- qla_printk(KERN_DEBUG, ha,
- "Failed to set 64 bit PCI DMA mask, falling back "
- "to 32 bit MASK.\n");
- pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK);
+ return;
}
- } else {
- pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK);
}
+
+ dma_set_mask(&ha->pdev->dev, DMA_32BIT_MASK);
+ pci_set_consistent_dma_mask(ha->pdev, DMA_32BIT_MASK);
}
static int
@@ -1316,6 +1339,7 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
ha->prev_topology = 0;
ha->ports = MAX_BUSES;
ha->init_cb_size = sizeof(init_cb_t);
+ ha->mgmt_svr_loop_id = MANAGEMENT_SERVER;
/* Assign ISP specific operations. */
ha->isp_ops.pci_config = qla2100_pci_config;
@@ -1338,6 +1362,7 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
ha->isp_ops.calc_req_entries = qla2x00_calc_iocbs_32;
ha->isp_ops.build_iocbs = qla2x00_build_scsi_iocbs_32;
ha->isp_ops.prep_ms_iocb = qla2x00_prep_ms_iocb;
+ ha->isp_ops.prep_ms_fdmi_iocb = qla2x00_prep_ms_fdmi_iocb;
ha->isp_ops.read_nvram = qla2x00_read_nvram_data;
ha->isp_ops.write_nvram = qla2x00_write_nvram_data;
ha->isp_ops.fw_dump = qla2100_fw_dump;
@@ -1375,6 +1400,7 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
ha->init_cb_size = sizeof(struct init_cb_24xx);
+ ha->mgmt_svr_loop_id = 10;
ha->isp_ops.pci_config = qla24xx_pci_config;
ha->isp_ops.reset_chip = qla24xx_reset_chip;
ha->isp_ops.chip_diag = qla24xx_chip_diag;
@@ -1395,6 +1421,7 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
ha->isp_ops.fabric_login = qla24xx_login_fabric;
ha->isp_ops.fabric_logout = qla24xx_fabric_logout;
ha->isp_ops.prep_ms_iocb = qla24xx_prep_ms_iocb;
+ ha->isp_ops.prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb;
ha->isp_ops.read_nvram = qla24xx_read_nvram_data;
ha->isp_ops.write_nvram = qla24xx_write_nvram_data;
ha->isp_ops.fw_dump = qla24xx_fw_dump;
@@ -1558,8 +1585,6 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
return 0;
probe_failed:
- fc_remove_host(ha->host);
-
qla2x00_free_device(ha);
scsi_host_put(host);
@@ -1601,10 +1626,6 @@ qla2x00_free_device(scsi_qla_host_t *ha)
if (!IS_QLA2100(ha) && !IS_QLA2200(ha))
qla2x00_cancel_io_descriptors(ha);
- /* turn-off interrupts on the card */
- if (ha->interrupts_on)
- ha->isp_ops.disable_intrs(ha);
-
/* Disable timer */
if (ha->timer_active)
qla2x00_stop_timer(ha);
@@ -1624,8 +1645,14 @@ qla2x00_free_device(scsi_qla_host_t *ha)
}
}
- qla2x00_mem_free(ha);
+ /* Stop currently executing firmware. */
+ qla2x00_stop_firmware(ha);
+
+ /* turn-off interrupts on the card */
+ if (ha->interrupts_on)
+ ha->isp_ops.disable_intrs(ha);
+ qla2x00_mem_free(ha);
ha->flags.online = 0;
@@ -1934,7 +1961,7 @@ qla2x00_mem_free(scsi_qla_host_t *ha)
{
struct list_head *fcpl, *fcptemp;
fc_port_t *fcport;
- unsigned long wtime;/* max wait time if mbx cmd is busy. */
+ unsigned int wtime;/* max wait time if mbx cmd is busy. */
if (ha == NULL) {
/* error */
@@ -1943,11 +1970,9 @@ qla2x00_mem_free(scsi_qla_host_t *ha)
}
/* Make sure all other threads are stopped. */
- wtime = 60 * HZ;
- while (ha->dpc_wait && wtime) {
- set_current_state(TASK_INTERRUPTIBLE);
- wtime = schedule_timeout(wtime);
- }
+ wtime = 60 * 1000;
+ while (ha->dpc_wait && wtime)
+ wtime = msleep_interruptible(wtime);
/* free ioctl memory */
qla2x00_free_ioctl_mem(ha);
@@ -2478,15 +2503,15 @@ qla2x00_timer(scsi_qla_host_t *ha)
int
qla2x00_down_timeout(struct semaphore *sema, unsigned long timeout)
{
- const unsigned int step = HZ/10;
+ const unsigned int step = 100; /* msecs */
+ unsigned int iterations = jiffies_to_msecs(timeout)/100;
do {
if (!down_trylock(sema))
return 0;
- set_current_state(TASK_INTERRUPTIBLE);
- if (schedule_timeout(step))
+ if (msleep_interruptible(step))
break;
- } while ((timeout -= step) > 0);
+ } while (--iterations >= 0);
return -ETIMEDOUT;
}