summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla2xxx/qla_os.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_os.c')
-rw-r--r--drivers/scsi/qla2xxx/qla_os.c86
1 files changed, 10 insertions, 76 deletions
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index fd14c7bfc62..f9e5b85e84d 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -201,12 +201,12 @@ MODULE_PARM_DESC(ql2xmdcapmask,
"Set the Minidump driver capture mask level. "
"Default is 0x7F - Can be set to 0x3, 0x7, 0xF, 0x1F, 0x7F.");
-int ql2xmdenable;
+int ql2xmdenable = 1;
module_param(ql2xmdenable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xmdenable,
"Enable/disable MiniDump. "
- "0 (Default) - MiniDump disabled. "
- "1 - MiniDump enabled.");
+ "0 - MiniDump disabled. "
+ "1 (Default) - MiniDump enabled.");
/*
* SCSI host template entry points
@@ -423,6 +423,7 @@ fail2:
qla25xx_delete_queues(vha);
destroy_workqueue(ha->wq);
ha->wq = NULL;
+ vha->req = ha->req_q_map[0];
fail:
ha->mqenable = 0;
kfree(ha->req_q_map);
@@ -814,49 +815,6 @@ qla2x00_wait_for_chip_reset(scsi_qla_host_t *vha)
return return_status;
}
-/*
- * qla2x00_wait_for_loop_ready
- * Wait for MAX_LOOP_TIMEOUT(5 min) value for loop
- * to be in LOOP_READY state.
- * Input:
- * ha - pointer to host adapter structure
- *
- * Note:
- * Does context switching-Release SPIN_LOCK
- * (if any) before calling this routine.
- *
- *
- * Return:
- * Success (LOOP_READY) : 0
- * Failed (LOOP_NOT_READY) : 1
- */
-static inline int
-qla2x00_wait_for_loop_ready(scsi_qla_host_t *vha)
-{
- int return_status = QLA_SUCCESS;
- unsigned long loop_timeout ;
- struct qla_hw_data *ha = vha->hw;
- scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
-
- /* wait for 5 min at the max for loop to be ready */
- loop_timeout = jiffies + (MAX_LOOP_TIMEOUT * HZ);
-
- while ((!atomic_read(&base_vha->loop_down_timer) &&
- atomic_read(&base_vha->loop_state) == LOOP_DOWN) ||
- atomic_read(&base_vha->loop_state) != LOOP_READY) {
- if (atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
- return_status = QLA_FUNCTION_FAILED;
- break;
- }
- msleep(1000);
- if (time_after_eq(jiffies, loop_timeout)) {
- return_status = QLA_FUNCTION_FAILED;
- break;
- }
- }
- return (return_status);
-}
-
static void
sp_get(struct srb *sp)
{
@@ -1035,12 +993,6 @@ __qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
"Wait for hba online failed for cmd=%p.\n", cmd);
goto eh_reset_failed;
}
- err = 1;
- if (qla2x00_wait_for_loop_ready(vha) != QLA_SUCCESS) {
- ql_log(ql_log_warn, vha, 0x800b,
- "Wait for loop ready failed for cmd=%p.\n", cmd);
- goto eh_reset_failed;
- }
err = 2;
if (do_reset(fcport, cmd->device->lun, cmd->request->cpu + 1)
!= QLA_SUCCESS) {
@@ -1137,10 +1089,9 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
goto eh_bus_reset_done;
}
- if (qla2x00_wait_for_loop_ready(vha) == QLA_SUCCESS) {
- if (qla2x00_loop_reset(vha) == QLA_SUCCESS)
- ret = SUCCESS;
- }
+ if (qla2x00_loop_reset(vha) == QLA_SUCCESS)
+ ret = SUCCESS;
+
if (ret == FAILED)
goto eh_bus_reset_done;
@@ -1206,15 +1157,6 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
if (qla2x00_wait_for_reset_ready(vha) != QLA_SUCCESS)
goto eh_host_reset_lock;
- /*
- * Fixme-may be dpc thread is active and processing
- * loop_resync,so wait a while for it to
- * be completed and then issue big hammer.Otherwise
- * it may cause I/O failure as big hammer marks the
- * devices as lost kicking of the port_down_timer
- * while dpc is stuck for the mailbox to complete.
- */
- qla2x00_wait_for_loop_ready(vha);
if (vha != base_vha) {
if (qla2x00_vp_abort_isp(vha))
goto eh_host_reset_lock;
@@ -1297,16 +1239,13 @@ qla2x00_loop_reset(scsi_qla_host_t *vha)
atomic_set(&vha->loop_state, LOOP_DOWN);
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
qla2x00_mark_all_devices_lost(vha, 0);
- qla2x00_wait_for_loop_ready(vha);
}
if (ha->flags.enable_lip_reset) {
ret = qla2x00_lip_reset(vha);
- if (ret != QLA_SUCCESS) {
+ if (ret != QLA_SUCCESS)
ql_dbg(ql_dbg_taskm, vha, 0x802e,
"lip_reset failed (%d).\n", ret);
- } else
- qla2x00_wait_for_loop_ready(vha);
}
/* Issue marker command only when we are going to start the I/O */
@@ -4070,13 +4009,8 @@ qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
/* For ISP82XX complete any pending mailbox cmd */
if (IS_QLA82XX(ha)) {
ha->flags.isp82xx_fw_hung = 1;
- if (ha->flags.mbox_busy) {
- ha->flags.mbox_int = 1;
- ql_dbg(ql_dbg_aer, vha, 0x9001,
- "Due to pci channel io frozen, doing premature "
- "completion of mbx command.\n");
- complete(&ha->mbx_intr_comp);
- }
+ ql_dbg(ql_dbg_aer, vha, 0x9001, "Pci channel io frozen\n");
+ qla82xx_clear_pending_mbx(vha);
}
qla2x00_free_irqs(vha);
pci_disable_device(pdev);