diff options
Diffstat (limited to 'drivers/scsi/qla2xxx')
-rw-r--r-- | drivers/scsi/qla2xxx/qla_isr.c | 192 |
1 files changed, 63 insertions, 129 deletions
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index a1968eb5e9c..b92f9a6ee4f 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1283,6 +1283,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) struct sts_entry_24xx *sts24; uint16_t comp_status; uint16_t scsi_status; + uint16_t ox_id; uint8_t lscsi_status; int32_t resid; uint32_t sense_len, rsp_info_len, resid_len, fw_resid_len; @@ -1291,6 +1292,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) uint32_t handle; uint16_t que; struct req_que *req; + int logit = 1; sts = (sts_entry_t *) pkt; sts24 = (struct sts_entry_24xx *) pkt; @@ -1320,9 +1322,9 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) sp = NULL; if (sp == NULL) { - DEBUG2(printk("scsi(%ld): Status Entry invalid handle.\n", - vha->host_no)); - qla_printk(KERN_WARNING, ha, "Status Entry invalid handle.\n"); + qla_printk(KERN_WARNING, ha, + "scsi(%ld): Invalid status handle (0x%x).\n", vha->host_no, + sts->handle); set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); qla2xxx_wake_dpc(vha); @@ -1330,10 +1332,9 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) } cp = sp->cmd; if (cp == NULL) { - DEBUG2(printk("scsi(%ld): Command already returned back to OS " - "pkt->handle=%d sp=%p.\n", vha->host_no, handle, sp)); qla_printk(KERN_WARNING, ha, - "Command is NULL: already returned to OS (sp=%p)\n", sp); + "scsi(%ld): Command already returned (0x%x/%p).\n", + vha->host_no, sts->handle, sp); return; } @@ -1342,6 +1343,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) fcport = sp->fcport; + ox_id = 0; sense_len = rsp_info_len = resid_len = fw_resid_len = 0; if (IS_FWI2_CAPABLE(ha)) { if (scsi_status & SS_SENSE_LEN_VALID) @@ -1355,6 +1357,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) rsp_info = sts24->data; sense_data = sts24->data; host_to_fcp_swap(sts24->data, sizeof(sts24->data)); + ox_id = le16_to_cpu(sts24->ox_id); } else { if (scsi_status & SS_SENSE_LEN_VALID) sense_len = le16_to_cpu(sts->req_sense_length); @@ -1371,17 +1374,13 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) if (IS_FWI2_CAPABLE(ha)) sense_data += rsp_info_len; if (rsp_info_len > 3 && rsp_info[3]) { - DEBUG2(printk("scsi(%ld:%d:%d:%d) FCP I/O protocol " - "failure (%x/%02x%02x%02x%02x%02x%02x%02x%02x)..." - "retrying command\n", vha->host_no, - cp->device->channel, cp->device->id, - cp->device->lun, rsp_info_len, rsp_info[0], - rsp_info[1], rsp_info[2], rsp_info[3], rsp_info[4], - rsp_info[5], rsp_info[6], rsp_info[7])); + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d): FCP I/O protocol failure " + "(0x%x/0x%x).\n", vha->host_no, cp->device->id, + cp->device->lun, rsp_info_len, rsp_info[3])); cp->result = DID_BUS_BUSY << 16; - qla2x00_sp_compl(ha, sp); - return; + goto out; } } @@ -1408,12 +1407,10 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) ((unsigned)(scsi_bufflen(cp) - resid) < cp->underflow)) { qla_printk(KERN_INFO, ha, - "scsi(%ld:%d:%d:%d): Mid-layer underflow " - "detected (%x of %x bytes)...returning " - "error status.\n", vha->host_no, - cp->device->channel, cp->device->id, - cp->device->lun, resid, - scsi_bufflen(cp)); + "scsi(%ld:%d:%d): Mid-layer underflow " + "detected (0x%x of 0x%x bytes).\n", + vha->host_no, cp->device->id, + cp->device->lun, resid, scsi_bufflen(cp)); cp->result = DID_ERROR << 16; break; @@ -1422,12 +1419,12 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) cp->result = DID_OK << 16 | lscsi_status; if (lscsi_status == SAM_STAT_TASK_SET_FULL) { - DEBUG2(printk(KERN_INFO - "scsi(%ld): QUEUE FULL status detected " - "0x%x-0x%x.\n", vha->host_no, comp_status, - scsi_status)); + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d) QUEUE FULL detected.\n", + vha->host_no, cp->device->id, cp->device->lun)); break; } + logit = 0; if (lscsi_status != SS_CHECK_CONDITION) break; @@ -1439,23 +1436,14 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) break; case CS_DATA_UNDERRUN: - DEBUG2(printk(KERN_INFO - "scsi(%ld:%d:%d) UNDERRUN status detected 0x%x-0x%x. " - "resid=0x%x fw_resid=0x%x cdb=0x%x os_underflow=0x%x\n", - vha->host_no, cp->device->id, cp->device->lun, comp_status, - scsi_status, resid_len, fw_resid_len, cp->cmnd[0], - cp->underflow)); - /* Use F/W calculated residual length. */ resid = IS_FWI2_CAPABLE(ha) ? fw_resid_len : resid_len; scsi_set_resid(cp, resid); if (scsi_status & SS_RESIDUAL_UNDER) { if (IS_FWI2_CAPABLE(ha) && fw_resid_len != resid_len) { - DEBUG2(printk( - "scsi(%ld:%d:%d:%d) Dropped frame(s) " - "detected (%x of %x bytes)...residual " - "length mismatch...retrying command.\n", - vha->host_no, cp->device->channel, + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d) Dropped frame(s) detected " + "(0x%x of 0x%x bytes).\n", vha->host_no, cp->device->id, cp->device->lun, resid, scsi_bufflen(cp))); @@ -1467,21 +1455,18 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) ((unsigned)(scsi_bufflen(cp) - resid) < cp->underflow)) { qla_printk(KERN_INFO, ha, - "scsi(%ld:%d:%d:%d): Mid-layer underflow " - "detected (%x of %x bytes)...returning " - "error status.\n", vha->host_no, - cp->device->channel, cp->device->id, + "scsi(%ld:%d:%d): Mid-layer underflow " + "detected (0x%x of 0x%x bytes).\n", + vha->host_no, cp->device->id, cp->device->lun, resid, scsi_bufflen(cp)); cp->result = DID_ERROR << 16; break; } } else if (!lscsi_status) { - DEBUG2(printk( - "scsi(%ld:%d:%d:%d) Dropped frame(s) detected " - "(%x of %x bytes)...firmware reported underrun..." - "retrying command.\n", vha->host_no, - cp->device->channel, cp->device->id, + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d) Dropped frame(s) detected (0x%x " + "of 0x%x bytes).\n", vha->host_no, cp->device->id, cp->device->lun, resid, scsi_bufflen(cp))); cp->result = DID_ERROR << 16; @@ -1489,6 +1474,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) } cp->result = DID_OK << 16 | lscsi_status; + logit = 0; /* * Check to see if SCSI Status is non zero. If so report SCSI @@ -1496,10 +1482,11 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) */ if (lscsi_status != 0) { if (lscsi_status == SAM_STAT_TASK_SET_FULL) { - DEBUG2(printk(KERN_INFO - "scsi(%ld): QUEUE FULL status detected " - "0x%x-0x%x.\n", vha->host_no, comp_status, - scsi_status)); + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d) QUEUE FULL detected.\n", + vha->host_no, cp->device->id, + cp->device->lun)); + logit = 1; break; } if (lscsi_status != SS_CHECK_CONDITION) @@ -1513,109 +1500,56 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) } break; - case CS_DATA_OVERRUN: - DEBUG2(printk(KERN_INFO - "scsi(%ld:%d:%d): OVERRUN status detected 0x%x-0x%x\n", - vha->host_no, cp->device->id, cp->device->lun, comp_status, - scsi_status)); - DEBUG2(printk(KERN_INFO - "CDB: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", - cp->cmnd[0], cp->cmnd[1], cp->cmnd[2], cp->cmnd[3], - cp->cmnd[4], cp->cmnd[5])); - DEBUG2(printk(KERN_INFO - "PID=0x%lx req=0x%x xtra=0x%x -- returning DID_ERROR " - "status!\n", - cp->serial_number, scsi_bufflen(cp), resid_len)); - - cp->result = DID_ERROR << 16; - break; - case CS_PORT_LOGGED_OUT: case CS_PORT_CONFIG_CHG: case CS_PORT_BUSY: case CS_INCOMPLETE: case CS_PORT_UNAVAILABLE: - /* - * If the port is in Target Down state, return all IOs for this - * Target with DID_NO_CONNECT ELSE Queue the IOs in the - * retry_queue. - */ - DEBUG2(printk("scsi(%ld:%d:%d): status_entry: Port Down " - "pid=%ld, compl status=0x%x, port state=0x%x\n", - vha->host_no, cp->device->id, cp->device->lun, - cp->serial_number, comp_status, - atomic_read(&fcport->state))); - + case CS_TIMEOUT: /* * We are going to have the fc class block the rport * while we try to recover so instruct the mid layer * to requeue until the class decides how to handle this. */ cp->result = DID_TRANSPORT_DISRUPTED << 16; + + if (comp_status == CS_TIMEOUT) { + if (IS_FWI2_CAPABLE(ha)) + break; + else if ((le16_to_cpu(sts->status_flags) & + SF_LOGOUT_SENT) == 0) + break; + } + + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d) Port down status: port-state=0x%x\n", + vha->host_no, cp->device->id, cp->device->lun, + atomic_read(&fcport->state))); + if (atomic_read(&fcport->state) == FCS_ONLINE) qla2x00_mark_device_lost(fcport->vha, fcport, 1, 1); break; case CS_RESET: - DEBUG2(printk(KERN_INFO - "scsi(%ld): RESET status detected 0x%x-0x%x.\n", - vha->host_no, comp_status, scsi_status)); - - cp->result = DID_RESET << 16; - break; - case CS_ABORTED: - /* - * hv2.19.12 - DID_ABORT does not retry the request if we - * aborted this request then abort otherwise it must be a - * reset. - */ - DEBUG2(printk(KERN_INFO - "scsi(%ld): ABORT status detected 0x%x-0x%x.\n", - vha->host_no, comp_status, scsi_status)); - cp->result = DID_RESET << 16; break; - - case CS_TIMEOUT: - /* - * We are going to have the fc class block the rport - * while we try to recover so instruct the mid layer - * to requeue until the class decides how to handle this. - */ - cp->result = DID_TRANSPORT_DISRUPTED << 16; - - if (IS_FWI2_CAPABLE(ha)) { - DEBUG2(printk(KERN_INFO - "scsi(%ld:%d:%d:%d): TIMEOUT status detected " - "0x%x-0x%x\n", vha->host_no, cp->device->channel, - cp->device->id, cp->device->lun, comp_status, - scsi_status)); - break; - } - DEBUG2(printk(KERN_INFO - "scsi(%ld:%d:%d:%d): TIMEOUT status detected 0x%x-0x%x " - "sflags=%x.\n", vha->host_no, cp->device->channel, - cp->device->id, cp->device->lun, comp_status, scsi_status, - le16_to_cpu(sts->status_flags))); - - /* Check to see if logout occurred. */ - if ((le16_to_cpu(sts->status_flags) & SF_LOGOUT_SENT)) - qla2x00_mark_device_lost(fcport->vha, fcport, 1, 1); - break; - default: - DEBUG3(printk("scsi(%ld): Error detected (unknown status) " - "0x%x-0x%x.\n", vha->host_no, comp_status, scsi_status)); - qla_printk(KERN_INFO, ha, - "Unknown status detected 0x%x-0x%x.\n", - comp_status, scsi_status); - cp->result = DID_ERROR << 16; break; } - /* Place command on done queue. */ +out: + if (logit) + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d) FCP command status: 0x%x-0x%x (0x%x) " + "oxid=0x%x ser=0x%lx cdb=%02x%02x%02x len=0x%x " + "rsp_info=0x%x resid=0x%x fw_resid=0x%x\n", vha->host_no, + cp->device->id, cp->device->lun, comp_status, scsi_status, + cp->result, ox_id, cp->serial_number, cp->cmnd[0], + cp->cmnd[1], cp->cmnd[2], scsi_bufflen(cp), rsp_info_len, + resid_len, fw_resid_len)); + if (rsp->status_srb == NULL) qla2x00_sp_compl(ha, sp); } |