summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla4xxx/ql4_fw.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla4xxx/ql4_fw.h')
-rw-r--r--drivers/scsi/qla4xxx/ql4_fw.h139
1 files changed, 138 insertions, 1 deletions
diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h
index 855226e0866..c94c9ddfb3a 100644
--- a/drivers/scsi/qla4xxx/ql4_fw.h
+++ b/drivers/scsi/qla4xxx/ql4_fw.h
@@ -11,7 +11,7 @@
#define MAX_PRST_DEV_DB_ENTRIES 64
#define MIN_DISC_DEV_DB_ENTRY MAX_PRST_DEV_DB_ENTRIES
-#define MAX_DEV_DB_ENTRIES 512
+#define MAX_DEV_DB_ENTRIES 512
/*************************************************************************
*
@@ -37,6 +37,33 @@ struct host_mem_cfg_regs {
__le32 rsrvd1[31]; /* 0x84-0xFF */
};
+/*
+ * ISP 82xx I/O Register Set structure definitions.
+ */
+struct device_reg_82xx {
+ __le32 req_q_out; /* 0x0000 (R): Request Queue out-Pointer. */
+ __le32 reserve1[63]; /* Request Queue out-Pointer. (64 * 4) */
+ __le32 rsp_q_in; /* 0x0100 (R/W): Response Queue In-Pointer. */
+ __le32 reserve2[63]; /* Response Queue In-Pointer. */
+ __le32 rsp_q_out; /* 0x0200 (R/W): Response Queue Out-Pointer. */
+ __le32 reserve3[63]; /* Response Queue Out-Pointer. */
+
+ __le32 mailbox_in[8]; /* 0x0300 (R/W): Mail box In registers */
+ __le32 reserve4[24];
+ __le32 hint; /* 0x0380 (R/W): Host interrupt register */
+#define HINT_MBX_INT_PENDING BIT_0
+ __le32 reserve5[31];
+ __le32 mailbox_out[8]; /* 0x0400 (R): Mail box Out registers */
+ __le32 reserve6[56];
+
+ __le32 host_status; /* Offset 0x500 (R): host status */
+#define HSRX_RISC_MB_INT BIT_0 /* RISC to Host Mailbox interrupt */
+#define HSRX_RISC_IOCB_INT BIT_1 /* RISC to Host IOCB interrupt */
+
+ __le32 host_int; /* Offset 0x0504 (R/W): Interrupt status. */
+#define ISRX_82XX_RISC_INT BIT_0 /* RISC interrupt. */
+};
+
/* remote register set (access via PCI memory read/write) */
struct isp_reg {
#define MBOX_REG_COUNT 8
@@ -206,6 +233,79 @@ union external_hw_config_reg {
uint32_t Asuint32_t;
};
+/* 82XX Support start */
+/* 82xx Default FLT Addresses */
+#define FA_FLASH_LAYOUT_ADDR_82 0xFC400
+#define FA_FLASH_DESCR_ADDR_82 0xFC000
+#define FA_BOOT_LOAD_ADDR_82 0x04000
+#define FA_BOOT_CODE_ADDR_82 0x20000
+#define FA_RISC_CODE_ADDR_82 0x40000
+#define FA_GOLD_RISC_CODE_ADDR_82 0x80000
+
+/* Flash Description Table */
+struct qla_fdt_layout {
+ uint8_t sig[4];
+ uint16_t version;
+ uint16_t len;
+ uint16_t checksum;
+ uint8_t unused1[2];
+ uint8_t model[16];
+ uint16_t man_id;
+ uint16_t id;
+ uint8_t flags;
+ uint8_t erase_cmd;
+ uint8_t alt_erase_cmd;
+ uint8_t wrt_enable_cmd;
+ uint8_t wrt_enable_bits;
+ uint8_t wrt_sts_reg_cmd;
+ uint8_t unprotect_sec_cmd;
+ uint8_t read_man_id_cmd;
+ uint32_t block_size;
+ uint32_t alt_block_size;
+ uint32_t flash_size;
+ uint32_t wrt_enable_data;
+ uint8_t read_id_addr_len;
+ uint8_t wrt_disable_bits;
+ uint8_t read_dev_id_len;
+ uint8_t chip_erase_cmd;
+ uint16_t read_timeout;
+ uint8_t protect_sec_cmd;
+ uint8_t unused2[65];
+};
+
+/* Flash Layout Table */
+
+struct qla_flt_location {
+ uint8_t sig[4];
+ uint16_t start_lo;
+ uint16_t start_hi;
+ uint8_t version;
+ uint8_t unused[5];
+ uint16_t checksum;
+};
+
+struct qla_flt_header {
+ uint16_t version;
+ uint16_t length;
+ uint16_t checksum;
+ uint16_t unused;
+};
+
+/* 82xx FLT Regions */
+#define FLT_REG_FDT 0x1a
+#define FLT_REG_FLT 0x1c
+#define FLT_REG_BOOTLOAD_82 0x72
+#define FLT_REG_FW_82 0x74
+#define FLT_REG_GOLD_FW_82 0x75
+#define FLT_REG_BOOT_CODE_82 0x78
+
+struct qla_flt_region {
+ uint32_t code;
+ uint32_t size;
+ uint32_t start;
+ uint32_t end;
+};
+
/*************************************************************************
*
* Mailbox Commands Structures and Definitions
@@ -215,6 +315,10 @@ union external_hw_config_reg {
/* Mailbox command definitions */
#define MBOX_CMD_ABOUT_FW 0x0009
#define MBOX_CMD_PING 0x000B
+#define MBOX_CMD_ENABLE_INTRS 0x0010
+#define INTR_DISABLE 0
+#define INTR_ENABLE 1
+#define MBOX_CMD_STOP_FW 0x0014
#define MBOX_CMD_ABORT_TASK 0x0015
#define MBOX_CMD_LUN_RESET 0x0016
#define MBOX_CMD_TARGET_WARM_RESET 0x0017
@@ -243,6 +347,7 @@ union external_hw_config_reg {
#define DDB_DS_LOGIN_IN_PROCESS 0x07
#define MBOX_CMD_GET_FW_STATE 0x0069
#define MBOX_CMD_GET_INIT_FW_CTRL_BLOCK_DEFAULTS 0x006A
+#define MBOX_CMD_GET_SYS_INFO 0x0078
#define MBOX_CMD_RESTORE_FACTORY_DEFAULTS 0x0087
#define MBOX_CMD_SET_ACB 0x0088
#define MBOX_CMD_GET_ACB 0x0089
@@ -318,6 +423,15 @@ union external_hw_config_reg {
#define MBOX_ASTS_IPSEC_SYSTEM_FATAL_ERROR 0x8022
#define MBOX_ASTS_SUBNET_STATE_CHANGE 0x8027
+/* ACB State Defines */
+#define ACB_STATE_UNCONFIGURED 0x00
+#define ACB_STATE_INVALID 0x01
+#define ACB_STATE_ACQUIRING 0x02
+#define ACB_STATE_TENTATIVE 0x03
+#define ACB_STATE_DEPRICATED 0x04
+#define ACB_STATE_VALID 0x05
+#define ACB_STATE_DISABLING 0x06
+
/*************************************************************************/
/* Host Adapter Initialization Control Block (from host) */
@@ -558,6 +672,20 @@ struct flash_sys_info {
uint32_t reserved1[39]; /* 170-1ff */
}; /* 200 */
+struct mbx_sys_info {
+ uint8_t board_id_str[16]; /* Keep board ID string first */
+ /* in this structure for GUI. */
+ uint16_t board_id; /* board ID code */
+ uint16_t phys_port_cnt; /* number of physical network ports */
+ uint16_t port_num; /* network port for this PCI function */
+ /* (port 0 is first port) */
+ uint8_t mac_addr[6]; /* MAC address for this PCI function */
+ uint32_t iscsi_pci_func_cnt; /* number of iSCSI PCI functions */
+ uint32_t pci_func; /* this PCI function */
+ unsigned char serial_number[16]; /* serial number string */
+ uint8_t reserved[16];
+};
+
struct crash_record {
uint16_t fw_major_version; /* 00 - 01 */
uint16_t fw_minor_version; /* 02 - 03 */
@@ -814,4 +942,13 @@ struct passthru_status {
uint8_t res4[16]; /* 30-3F */
};
+/*
+ * ISP queue - response queue entry definition.
+ */
+struct response {
+ uint8_t data[60];
+ uint32_t signature;
+#define RESPONSE_PROCESSED 0xDEADDEAD /* Signature */
+};
+
#endif /* _QLA4X_FW_H */