summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla4xxx/ql4_init.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla4xxx/ql4_init.c')
-rw-r--r--drivers/scsi/qla4xxx/ql4_init.c45
1 files changed, 10 insertions, 35 deletions
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 9e81b810dc8..cc210f297a7 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -259,10 +259,16 @@ static int qla4xxx_fw_ready(struct scsi_qla_host *ha)
"seconds expired= %d\n", ha->host_no, __func__,
ha->firmware_state, ha->addl_fw_state,
timeout_count));
+ if (is_qla4032(ha) &&
+ !(ha->addl_fw_state & FW_ADDSTATE_LINK_UP) &&
+ (timeout_count < ADAPTER_INIT_TOV - 5)) {
+ break;
+ }
+
msleep(1000);
} /* end of for */
- if (timeout_count <= 0)
+ if (timeout_count == 0)
DEBUG2(printk("scsi%ld: %s: FW Initialization timed out!\n",
ha->host_no, __func__));
@@ -806,32 +812,6 @@ int qla4xxx_relogin_device(struct scsi_qla_host *ha,
return QLA_SUCCESS;
}
-/**
- * qla4010_get_topcat_presence - check if it is QLA4040 TopCat Chip
- * @ha: Pointer to host adapter structure.
- *
- **/
-static int qla4010_get_topcat_presence(struct scsi_qla_host *ha)
-{
- unsigned long flags;
- uint16_t topcat;
-
- if (ql4xxx_lock_nvram(ha) != QLA_SUCCESS)
- return QLA_ERROR;
- spin_lock_irqsave(&ha->hardware_lock, flags);
- topcat = rd_nvram_word(ha, offsetof(struct eeprom_data,
- isp4010.topcat));
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
-
- if ((topcat & TOPCAT_MASK) == TOPCAT_PRESENT)
- set_bit(AF_TOPCAT_CHIP_PRESENT, &ha->flags);
- else
- clear_bit(AF_TOPCAT_CHIP_PRESENT, &ha->flags);
- ql4xxx_unlock_nvram(ha);
- return QLA_SUCCESS;
-}
-
-
static int qla4xxx_config_nvram(struct scsi_qla_host *ha)
{
unsigned long flags;
@@ -866,7 +846,7 @@ static int qla4xxx_config_nvram(struct scsi_qla_host *ha)
/* set defaults */
if (is_qla4010(ha))
extHwConfig.Asuint32_t = 0x1912;
- else if (is_qla4022(ha))
+ else if (is_qla4022(ha) | is_qla4032(ha))
extHwConfig.Asuint32_t = 0x0023;
}
DEBUG(printk("scsi%ld: %s: Setting extHwConfig to 0xFFFF%04x\n",
@@ -927,7 +907,7 @@ static int qla4xxx_start_firmware_from_flash(struct scsi_qla_host *ha)
spin_lock_irqsave(&ha->hardware_lock, flags);
writel(jiffies, &ha->reg->mailbox[7]);
- if (is_qla4022(ha))
+ if (is_qla4022(ha) | is_qla4032(ha))
writel(set_rmask(NVR_WRITE_ENABLE),
&ha->reg->u1.isp4022.nvram);
@@ -1018,12 +998,7 @@ static int qla4xxx_start_firmware(struct scsi_qla_host *ha)
int soft_reset = 1;
int config_chip = 0;
- if (is_qla4010(ha)){
- if (qla4010_get_topcat_presence(ha) != QLA_SUCCESS)
- return QLA_ERROR;
- }
-
- if (is_qla4022(ha))
+ if (is_qla4022(ha) | is_qla4032(ha))
ql4xxx_set_mac_number(ha);
if (ql4xxx_lock_drvr_wait(ha) != QLA_SUCCESS)