summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla4xxx/ql4_os.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla4xxx/ql4_os.c')
-rw-r--r--drivers/scsi/qla4xxx/ql4_os.c262
1 files changed, 171 insertions, 91 deletions
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 519f6667dc0..3e0e5de2c33 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -18,6 +18,7 @@
#include "ql4_glbl.h"
#include "ql4_dbg.h"
#include "ql4_inline.h"
+#include "ql4_83xx.h"
/*
* Driver version
@@ -2315,8 +2316,17 @@ static void qla4xxx_mem_free(struct scsi_qla_host *ha)
if (ha->nx_pcibase)
iounmap(
(struct device_reg_82xx __iomem *)ha->nx_pcibase);
- } else if (ha->reg)
+ } else if (is_qla8032(ha)) {
+ if (ha->nx_pcibase)
+ iounmap(
+ (struct device_reg_83xx __iomem *)ha->nx_pcibase);
+ } else if (ha->reg) {
iounmap(ha->reg);
+ }
+
+ if (ha->reset_tmplt.buff)
+ vfree(ha->reset_tmplt.buff);
+
pci_release_regions(ha->pdev);
}
@@ -2454,7 +2464,6 @@ static int qla4_8xxx_check_temp(struct scsi_qla_host *ha)
static int qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha)
{
uint32_t fw_heartbeat_counter;
- uint32_t halt_status1, halt_status2;
int status = QLA_SUCCESS;
fw_heartbeat_counter = qla4_8xxx_rd_direct(ha,
@@ -2472,28 +2481,7 @@ static int qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha)
/* FW not alive after 2 seconds */
if (ha->seconds_since_last_heartbeat == 2) {
ha->seconds_since_last_heartbeat = 0;
- halt_status1 = qla4_8xxx_rd_direct(ha,
- QLA8XXX_PEG_HALT_STATUS1);
- halt_status2 = qla4_8xxx_rd_direct(ha,
- QLA8XXX_PEG_HALT_STATUS2);
-
- ql4_printk(KERN_INFO, ha,
- "scsi(%ld): %s, Dumping hw/fw registers:\n "
- " PEG_HALT_STATUS1: 0x%x, PEG_HALT_STATUS2:"
- " 0x%x,\n PEG_NET_0_PC: 0x%x, PEG_NET_1_PC:"
- " 0x%x,\n PEG_NET_2_PC: 0x%x, PEG_NET_3_PC:"
- " 0x%x,\n PEG_NET_4_PC: 0x%x\n", ha->host_no,
- __func__, halt_status1, halt_status2,
- qla4_82xx_rd_32(ha, QLA82XX_CRB_PEG_NET_0 +
- 0x3c),
- qla4_82xx_rd_32(ha, QLA82XX_CRB_PEG_NET_1 +
- 0x3c),
- qla4_82xx_rd_32(ha, QLA82XX_CRB_PEG_NET_2 +
- 0x3c),
- qla4_82xx_rd_32(ha, QLA82XX_CRB_PEG_NET_3 +
- 0x3c),
- qla4_82xx_rd_32(ha, QLA82XX_CRB_PEG_NET_4 +
- 0x3c));
+ qla4_8xxx_dump_peg_reg(ha);
status = QLA_ERROR;
}
} else
@@ -2503,6 +2491,48 @@ static int qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha)
return status;
}
+static void qla4_8xxx_process_fw_error(struct scsi_qla_host *ha)
+{
+ uint32_t halt_status;
+ int halt_status_unrecoverable = 0;
+
+ halt_status = qla4_8xxx_rd_direct(ha, QLA8XXX_PEG_HALT_STATUS1);
+
+ if (is_qla8022(ha)) {
+ ql4_printk(KERN_INFO, ha, "%s: disabling pause transmit on port 0 & 1.\n",
+ __func__);
+ qla4_82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x98,
+ CRB_NIU_XG_PAUSE_CTL_P0 |
+ CRB_NIU_XG_PAUSE_CTL_P1);
+
+ if (QLA82XX_FWERROR_CODE(halt_status) == 0x67)
+ ql4_printk(KERN_ERR, ha, "%s: Firmware aborted with error code 0x00006700. Device is being reset\n",
+ __func__);
+ if (halt_status & HALT_STATUS_UNRECOVERABLE)
+ halt_status_unrecoverable = 1;
+ } else if (is_qla8032(ha)) {
+ if (halt_status & QLA83XX_HALT_STATUS_FW_RESET)
+ ql4_printk(KERN_ERR, ha, "%s: Firmware error detected device is being reset\n",
+ __func__);
+ else if (halt_status & QLA83XX_HALT_STATUS_UNRECOVERABLE)
+ halt_status_unrecoverable = 1;
+ }
+
+ /*
+ * Since we cannot change dev_state in interrupt context,
+ * set appropriate DPC flag then wakeup DPC
+ */
+ if (halt_status_unrecoverable) {
+ set_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags);
+ } else {
+ ql4_printk(KERN_INFO, ha, "%s: detect abort needed!\n",
+ __func__);
+ set_bit(DPC_RESET_HA, &ha->dpc_flags);
+ }
+ qla4xxx_mailbox_premature_completion(ha);
+ qla4xxx_wake_dpc(ha);
+}
+
/**
* qla4_8xxx_watchdog - Poll dev state
* @ha: Pointer to host adapter structure.
@@ -2511,7 +2541,7 @@ static int qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha)
**/
void qla4_8xxx_watchdog(struct scsi_qla_host *ha)
{
- uint32_t dev_state, halt_status;
+ uint32_t dev_state;
/* don't poll if reset is going on */
if (!(test_bit(DPC_RESET_ACTIVE, &ha->dpc_flags) ||
@@ -2520,16 +2550,18 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha)
dev_state = qla4_8xxx_rd_direct(ha, QLA8XXX_CRB_DEV_STATE);
if (qla4_8xxx_check_temp(ha)) {
- ql4_printk(KERN_INFO, ha, "disabling pause"
- " transmit on port 0 & 1.\n");
- qla4_82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x98,
- CRB_NIU_XG_PAUSE_CTL_P0 |
- CRB_NIU_XG_PAUSE_CTL_P1);
+ if (is_qla8022(ha)) {
+ ql4_printk(KERN_INFO, ha, "disabling pause transmit on port 0 & 1.\n");
+ qla4_82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x98,
+ CRB_NIU_XG_PAUSE_CTL_P0 |
+ CRB_NIU_XG_PAUSE_CTL_P1);
+ }
set_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags);
qla4xxx_wake_dpc(ha);
} else if (dev_state == QLA8XXX_DEV_NEED_RESET &&
- !test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
- if (!ql4xdontresethba) {
+ !test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
+ if (is_qla8032(ha) ||
+ (is_qla8022(ha) && !ql4xdontresethba)) {
ql4_printk(KERN_INFO, ha, "%s: HW State: "
"NEED RESET!\n", __func__);
set_bit(DPC_RESET_HA, &ha->dpc_flags);
@@ -2543,36 +2575,8 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha)
qla4xxx_wake_dpc(ha);
} else {
/* Check firmware health */
- if (qla4_8xxx_check_fw_alive(ha)) {
- ql4_printk(KERN_INFO, ha, "disabling pause"
- " transmit on port 0 & 1.\n");
- qla4_82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x98,
- CRB_NIU_XG_PAUSE_CTL_P0 |
- CRB_NIU_XG_PAUSE_CTL_P1);
- halt_status = qla4_8xxx_rd_direct(ha,
- QLA8XXX_PEG_HALT_STATUS1);
-
- if (QLA82XX_FWERROR_CODE(halt_status) == 0x67)
- ql4_printk(KERN_ERR, ha, "%s:"
- " Firmware aborted with"
- " error code 0x00006700."
- " Device is being reset\n",
- __func__);
-
- /* Since we cannot change dev_state in interrupt
- * context, set appropriate DPC flag then wakeup
- * DPC */
- if (halt_status & HALT_STATUS_UNRECOVERABLE)
- set_bit(DPC_HA_UNRECOVERABLE,
- &ha->dpc_flags);
- else {
- ql4_printk(KERN_INFO, ha, "%s: detect "
- "abort needed!\n", __func__);
- set_bit(DPC_RESET_HA, &ha->dpc_flags);
- }
- qla4xxx_mailbox_premature_completion(ha);
- qla4xxx_wake_dpc(ha);
- }
+ if (qla4_8xxx_check_fw_alive(ha))
+ qla4_8xxx_process_fw_error(ha);
}
}
}
@@ -2654,9 +2658,8 @@ static void qla4xxx_timer(struct scsi_qla_host *ha)
if (!pci_channel_offline(ha->pdev))
pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w);
- if (is_qla8022(ha)) {
+ if (is_qla80XX(ha))
qla4_8xxx_watchdog(ha);
- }
if (is_qla40XX(ha)) {
/* Check for heartbeat interval. */
@@ -2955,9 +2958,9 @@ static int qla4xxx_recover_adapter(struct scsi_qla_host *ha)
goto recover_ha_init_adapter;
}
- /* For the ISP-82xx adapter, issue a stop_firmware if invoked
+ /* For the ISP-8xxx adapter, issue a stop_firmware if invoked
* from eh_host_reset or ioctl module */
- if (is_qla8022(ha) && !reset_chip &&
+ if (is_qla80XX(ha) && !reset_chip &&
test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags)) {
DEBUG2(ql4_printk(KERN_INFO, ha,
@@ -2980,13 +2983,13 @@ static int qla4xxx_recover_adapter(struct scsi_qla_host *ha)
}
/* Issue full chip reset if recovering from a catastrophic error,
- * or if stop_firmware fails for ISP-82xx.
+ * or if stop_firmware fails for ISP-8xxx.
* This is the default case for ISP-4xxx */
if (is_qla40XX(ha) || reset_chip) {
if (is_qla40XX(ha))
goto chip_reset;
- /* Check if 82XX firmware is alive or not
+ /* Check if 8XXX firmware is alive or not
* We may have arrived here from NEED_RESET
* detection only */
if (test_bit(AF_FW_RECOVERY, &ha->flags))
@@ -3041,7 +3044,7 @@ recover_ha_init_adapter:
* Since we don't want to block the DPC for too long
* with multiple resets in the same thread,
* utilize DPC to retry */
- if (is_qla8022(ha)) {
+ if (is_qla80XX(ha)) {
ha->isp_ops->idc_lock(ha);
dev_state = qla4_8xxx_rd_direct(ha,
QLA8XXX_CRB_DEV_STATE);
@@ -3386,7 +3389,7 @@ static void qla4xxx_do_dpc(struct work_struct *work)
/* post events to application */
qla4xxx_do_work(ha);
- if (is_qla8022(ha)) {
+ if (is_qla80XX(ha)) {
if (test_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags)) {
ha->isp_ops->idc_lock(ha);
qla4_8xxx_wr_direct(ha, QLA8XXX_CRB_DEV_STATE,
@@ -3404,7 +3407,8 @@ static void qla4xxx_do_dpc(struct work_struct *work)
(test_bit(DPC_RESET_HA, &ha->dpc_flags) ||
test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags) ||
test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags))) {
- if (ql4xdontresethba) {
+ if ((is_qla8022(ha) && ql4xdontresethba) ||
+ (is_qla8032(ha) && qla4_83xx_idc_dontreset(ha))) {
DEBUG2(printk("scsi%ld: %s: Don't Reset HBA\n",
ha->host_no, __func__));
clear_bit(DPC_RESET_HA, &ha->dpc_flags);
@@ -3514,7 +3518,7 @@ static void qla4xxx_free_adapter(struct scsi_qla_host *ha)
/* Put firmware in known state */
ha->isp_ops->reset_firmware(ha);
- if (is_qla8022(ha)) {
+ if (is_qla80XX(ha)) {
ha->isp_ops->idc_lock(ha);
qla4_8xxx_clear_drv_active(ha);
ha->isp_ops->idc_unlock(ha);
@@ -3564,16 +3568,20 @@ int qla4_8xxx_iospace_config(struct scsi_qla_host *ha)
/* Mapping of IO base pointer, door bell read and write pointer */
/* mapping of IO base pointer */
- ha->qla4_82xx_reg =
- (struct device_reg_82xx __iomem *)((uint8_t *)ha->nx_pcibase +
- 0xbc000 + (ha->pdev->devfn << 11));
+ if (is_qla8022(ha)) {
+ ha->qla4_82xx_reg = (struct device_reg_82xx __iomem *)
+ ((uint8_t *)ha->nx_pcibase + 0xbc000 +
+ (ha->pdev->devfn << 11));
+ ha->nx_db_wr_ptr = (ha->pdev->devfn == 4 ? QLA82XX_CAM_RAM_DB1 :
+ QLA82XX_CAM_RAM_DB2);
+ } else if (is_qla8032(ha)) {
+ ha->qla4_83xx_reg = (struct device_reg_83xx __iomem *)
+ ((uint8_t *)ha->nx_pcibase);
+ }
db_base = pci_resource_start(pdev, 4); /* doorbell is on bar 4 */
db_len = pci_resource_len(pdev, 4);
- ha->nx_db_wr_ptr = (ha->pdev->devfn == 4 ? QLA82XX_CAM_RAM_DB1 :
- QLA82XX_CAM_RAM_DB2);
-
return 0;
iospace_error_exit:
return -ENOMEM;
@@ -3693,6 +3701,34 @@ static struct isp_operations qla4_82xx_isp_ops = {
.process_mailbox_interrupt = qla4_82xx_process_mbox_intr,
};
+static struct isp_operations qla4_83xx_isp_ops = {
+ .iospace_config = qla4_8xxx_iospace_config,
+ .pci_config = qla4_8xxx_pci_config,
+ .disable_intrs = qla4_83xx_disable_intrs,
+ .enable_intrs = qla4_83xx_enable_intrs,
+ .start_firmware = qla4_8xxx_load_risc,
+ .restart_firmware = qla4_83xx_start_firmware,
+ .intr_handler = qla4_83xx_intr_handler,
+ .interrupt_service_routine = qla4_83xx_interrupt_service_routine,
+ .need_reset = qla4_8xxx_need_reset,
+ .reset_chip = qla4_83xx_isp_reset,
+ .reset_firmware = qla4_8xxx_stop_firmware,
+ .queue_iocb = qla4_83xx_queue_iocb,
+ .complete_iocb = qla4_83xx_complete_iocb,
+ .rd_shdw_req_q_out = qla4_83xx_rd_shdw_req_q_out,
+ .rd_shdw_rsp_q_in = qla4_83xx_rd_shdw_rsp_q_in,
+ .get_sys_info = qla4_8xxx_get_sys_info,
+ .rd_reg_direct = qla4_83xx_rd_reg,
+ .wr_reg_direct = qla4_83xx_wr_reg,
+ .rd_reg_indirect = qla4_83xx_rd_reg_indirect,
+ .wr_reg_indirect = qla4_83xx_wr_reg_indirect,
+ .idc_lock = qla4_83xx_drv_lock,
+ .idc_unlock = qla4_83xx_drv_unlock,
+ .rom_lock_recovery = qla4_83xx_rom_lock_recovery,
+ .queue_mailbox_command = qla4_83xx_queue_mbox_cmd,
+ .process_mailbox_interrupt = qla4_83xx_process_mbox_intr,
+};
+
uint16_t qla4xxx_rd_shdw_req_q_out(struct scsi_qla_host *ha)
{
return (uint16_t)le32_to_cpu(ha->shadow_regs->req_q_out);
@@ -3703,6 +3739,11 @@ uint16_t qla4_82xx_rd_shdw_req_q_out(struct scsi_qla_host *ha)
return (uint16_t)le32_to_cpu(readl(&ha->qla4_82xx_reg->req_q_out));
}
+uint16_t qla4_83xx_rd_shdw_req_q_out(struct scsi_qla_host *ha)
+{
+ return (uint16_t)le32_to_cpu(readl(&ha->qla4_83xx_reg->req_q_out));
+}
+
uint16_t qla4xxx_rd_shdw_rsp_q_in(struct scsi_qla_host *ha)
{
return (uint16_t)le32_to_cpu(ha->shadow_regs->rsp_q_in);
@@ -3713,6 +3754,11 @@ uint16_t qla4_82xx_rd_shdw_rsp_q_in(struct scsi_qla_host *ha)
return (uint16_t)le32_to_cpu(readl(&ha->qla4_82xx_reg->rsp_q_in));
}
+uint16_t qla4_83xx_rd_shdw_rsp_q_in(struct scsi_qla_host *ha)
+{
+ return (uint16_t)le32_to_cpu(readl(&ha->qla4_83xx_reg->rsp_q_in));
+}
+
static ssize_t qla4xxx_show_boot_eth_info(void *data, int type, char *buf)
{
struct scsi_qla_host *ha = data;
@@ -5085,6 +5131,7 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev,
ha->pdev = pdev;
ha->host = host;
ha->host_no = host->host_no;
+ ha->func_num = PCI_FUNC(ha->pdev->devfn);
pci_enable_pcie_error_reporting(pdev);
@@ -5092,24 +5139,28 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev,
if (is_qla8022(ha)) {
ha->isp_ops = &qla4_82xx_isp_ops;
ha->reg_tbl = (uint32_t *) qla4_82xx_reg_tbl;
- rwlock_init(&ha->hw_lock);
ha->qdr_sn_window = -1;
ha->ddr_mn_window = -1;
ha->curr_window = 255;
- ha->func_num = PCI_FUNC(ha->pdev->devfn);
nx_legacy_intr = &legacy_intr[ha->func_num];
ha->nx_legacy_intr.int_vec_bit = nx_legacy_intr->int_vec_bit;
ha->nx_legacy_intr.tgt_status_reg =
nx_legacy_intr->tgt_status_reg;
ha->nx_legacy_intr.tgt_mask_reg = nx_legacy_intr->tgt_mask_reg;
ha->nx_legacy_intr.pci_int_reg = nx_legacy_intr->pci_int_reg;
+ } else if (is_qla8032(ha)) {
+ ha->isp_ops = &qla4_83xx_isp_ops;
+ ha->reg_tbl = (uint32_t *)qla4_83xx_reg_tbl;
} else {
ha->isp_ops = &qla4xxx_isp_ops;
}
- /* Set EEH reset type to fundamental if required by hba */
- if (is_qla8022(ha))
+ if (is_qla80XX(ha)) {
+ rwlock_init(&ha->hw_lock);
+ ha->pf_bit = ha->func_num << 16;
+ /* Set EEH reset type to fundamental if required by hba */
pdev->needs_freset = 1;
+ }
/* Configure PCI I/O space. */
ret = ha->isp_ops->iospace_config(ha);
@@ -5165,8 +5216,20 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev,
if (ret)
goto probe_failed;
- if (is_qla8022(ha))
- (void) qla4_8xxx_get_flash_info(ha);
+ if (is_qla80XX(ha))
+ qla4_8xxx_get_flash_info(ha);
+
+ if (is_qla8032(ha)) {
+ qla4_83xx_read_reset_template(ha);
+ /*
+ * NOTE: If ql4dontresethba==1, set IDC_CTRL DONTRESET_BIT0.
+ * If DONRESET_BIT0 is set, drivers should not set dev_state
+ * to NEED_RESET. But if NEED_RESET is set, drivers should
+ * should honor the reset.
+ */
+ if (ql4xdontresethba == 1)
+ qla4_83xx_set_idc_dontreset(ha);
+ }
/*
* Initialize the Host adapter request/response queues and
@@ -5177,7 +5240,7 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev,
while ((!test_bit(AF_ONLINE, &ha->flags)) &&
init_retry_count++ < MAX_INIT_RETRIES) {
- if (is_qla8022(ha)) {
+ if (is_qla80XX(ha)) {
ha->isp_ops->idc_lock(ha);
dev_state = qla4_8xxx_rd_direct(ha,
QLA82XX_CRB_DEV_STATE);
@@ -5201,7 +5264,8 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev,
if (!test_bit(AF_ONLINE, &ha->flags)) {
ql4_printk(KERN_WARNING, ha, "Failed to initialize adapter\n");
- if (is_qla8022(ha) && ql4xdontresethba) {
+ if ((is_qla8022(ha) && ql4xdontresethba) ||
+ (is_qla8032(ha) && qla4_83xx_idc_dontreset(ha))) {
/* Put the device in failed state. */
DEBUG2(printk(KERN_ERR "HW STATE: FAILED\n"));
ha->isp_ops->idc_lock(ha);
@@ -5233,7 +5297,8 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev,
goto remove_host;
}
- /* For ISP-82XX, request_irqs is called in qla4_8xxx_load_risc
+ /*
+ * For ISP-8XXX, request_irqs is called in qla4_8xxx_load_risc
* (which is called indirectly by qla4xxx_initialize_adapter),
* so that irqs will be registered after crbinit but before
* mbx_intr_enable.
@@ -5793,7 +5858,16 @@ static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd)
ha = to_qla_host(cmd->device->host);
- if (ql4xdontresethba) {
+ if (is_qla8032(ha) && ql4xdontresethba)
+ qla4_83xx_set_idc_dontreset(ha);
+
+ /*
+ * For ISP8324, if IDC_CTRL DONTRESET_BIT0 is set by other
+ * protocol drivers, we should not set device_state to
+ * NEED_RESET
+ */
+ if (ql4xdontresethba ||
+ (is_qla8032(ha) && qla4_83xx_idc_dontreset(ha))) {
DEBUG2(printk("scsi%ld: %s: Don't Reset HBA\n",
ha->host_no, __func__));
@@ -5817,7 +5891,7 @@ static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd)
}
if (!test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
- if (is_qla8022(ha))
+ if (is_qla80XX(ha))
set_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags);
else
set_bit(DPC_RESET_HA, &ha->dpc_flags);
@@ -5912,7 +5986,7 @@ static int qla4xxx_host_reset(struct Scsi_Host *shost, int reset_type)
break;
case SCSI_FIRMWARE_RESET:
if (!test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
- if (is_qla8022(ha))
+ if (is_qla80XX(ha))
/* set firmware context reset */
set_bit(DPC_RESET_HA_FW_CONTEXT,
&ha->dpc_flags);
@@ -6150,7 +6224,7 @@ qla4xxx_pci_slot_reset(struct pci_dev *pdev)
ha->isp_ops->disable_intrs(ha);
- if (is_qla8022(ha)) {
+ if (is_qla80XX(ha)) {
if (qla4_8xxx_error_recovery(ha) == QLA_SUCCESS) {
ret = PCI_ERS_RESULT_RECOVERED;
goto exit_slot_reset;
@@ -6216,6 +6290,12 @@ static struct pci_device_id qla4xxx_pci_tbl[] = {
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
+ {
+ .vendor = PCI_VENDOR_ID_QLOGIC,
+ .device = PCI_DEVICE_ID_QLOGIC_ISP8324,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ },
{0, 0},
};
MODULE_DEVICE_TABLE(pci, qla4xxx_pci_tbl);