summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qlogicpti.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qlogicpti.c')
-rw-r--r--drivers/scsi/qlogicpti.c50
1 files changed, 29 insertions, 21 deletions
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index c4195ea869e..594887205b0 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -193,7 +193,8 @@ static int qlogicpti_mbox_command(struct qlogicpti *qpti, u_short param[], int f
cpu_relax();
}
if (!loop_count)
- printk(KERN_EMERG "qlogicpti: mbox_command loop timeout #1\n");
+ printk(KERN_EMERG "qlogicpti%d: mbox_command loop timeout #1\n",
+ qpti->qpti_id);
/* Write mailbox command registers. */
switch (mbox_param[param[0]] >> 4) {
@@ -224,8 +225,8 @@ static int qlogicpti_mbox_command(struct qlogicpti *qpti, u_short param[], int f
(sbus_readw(qpti->qregs + HCCTRL) & HCCTRL_CRIRQ))
udelay(20);
if (!loop_count)
- printk(KERN_EMERG "qlogicpti: mbox_command[%04x] loop timeout #2\n",
- param[0]);
+ printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #2\n",
+ qpti->qpti_id, param[0]);
/* Wait for SBUS semaphore to get set. */
loop_count = DEFAULT_LOOP_COUNT;
@@ -238,16 +239,16 @@ static int qlogicpti_mbox_command(struct qlogicpti *qpti, u_short param[], int f
break;
}
if (!loop_count)
- printk(KERN_EMERG "qlogicpti: mbox_command[%04x] loop timeout #3\n",
- param[0]);
+ printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #3\n",
+ qpti->qpti_id, param[0]);
/* Wait for MBOX busy condition to go away. */
loop_count = DEFAULT_LOOP_COUNT;
while (--loop_count && (sbus_readw(qpti->qregs + MBOX0) == 0x04))
udelay(20);
if (!loop_count)
- printk(KERN_EMERG "qlogicpti: mbox_command[%04x] loop timeout #4\n",
- param[0]);
+ printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #4\n",
+ qpti->qpti_id, param[0]);
/* Read back output parameters. */
switch (mbox_param[param[0]] & 0xf) {
@@ -342,7 +343,8 @@ static int qlogicpti_reset_hardware(struct Scsi_Host *host)
while (--loop_count && ((sbus_readw(qpti->qregs + MBOX0) & 0xff) == 0x04))
udelay(20);
if (!loop_count)
- printk(KERN_EMERG "qlogicpti: reset_hardware loop timeout\n");
+ printk(KERN_EMERG "qlogicpti%d: reset_hardware loop timeout\n",
+ qpti->qpti_id);
sbus_writew(HCCTRL_PAUSE, qpti->qregs + HCCTRL);
set_sbus_cfg1(qpti);
@@ -721,12 +723,12 @@ static int __init qpti_register_irq(struct qlogicpti *qpti)
IRQF_SHARED, "Qlogic/PTI", qpti))
goto fail;
- printk("qpti%d: IRQ %d ", qpti->qpti_id, qpti->irq);
+ printk("qlogicpti%d: IRQ %d ", qpti->qpti_id, qpti->irq);
return 0;
fail:
- printk("qpti%d: Cannot acquire irq line\n", qpti->qpti_id);
+ printk("qlogicpti%d: Cannot acquire irq line\n", qpti->qpti_id);
return -1;
}
@@ -1210,7 +1212,7 @@ static int qlogicpti_return_status(struct Status_Entry *sts, int id)
host_status = DID_OK;
break;
default:
- printk(KERN_EMERG "qpti%d: unknown completion status 0x%04x\n",
+ printk(KERN_EMERG "qlogicpti%d: unknown completion status 0x%04x\n",
id, sts->completion_status);
host_status = DID_ERROR;
break;
@@ -1329,8 +1331,8 @@ static int qlogicpti_abort(struct scsi_cmnd *Cmnd)
u32 cmd_cookie;
int i;
- printk(KERN_WARNING "qlogicpti : Aborting cmd for tgt[%d] lun[%d]\n",
- (int)Cmnd->device->id, (int)Cmnd->device->lun);
+ printk(KERN_WARNING "qlogicpti%d: Aborting cmd for tgt[%d] lun[%d]\n",
+ qpti->qpti_id, (int)Cmnd->device->id, (int)Cmnd->device->lun);
qlogicpti_disable_irqs(qpti);
@@ -1348,7 +1350,8 @@ static int qlogicpti_abort(struct scsi_cmnd *Cmnd)
param[3] = cmd_cookie & 0xffff;
if (qlogicpti_mbox_command(qpti, param, 0) ||
(param[0] != MBOX_COMMAND_COMPLETE)) {
- printk(KERN_EMERG "qlogicpti : scsi abort failure: %x\n", param[0]);
+ printk(KERN_EMERG "qlogicpti%d: scsi abort failure: %x\n",
+ qpti->qpti_id, param[0]);
return_status = FAILED;
}
@@ -1364,7 +1367,8 @@ static int qlogicpti_reset(struct scsi_cmnd *Cmnd)
struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
int return_status = SUCCESS;
- printk(KERN_WARNING "qlogicpti : Resetting SCSI bus!\n");
+ printk(KERN_WARNING "qlogicpti%d: Resetting SCSI bus!\n",
+ qpti->qpti_id);
qlogicpti_disable_irqs(qpti);
@@ -1372,7 +1376,8 @@ static int qlogicpti_reset(struct scsi_cmnd *Cmnd)
param[1] = qpti->host_param.bus_reset_delay;
if (qlogicpti_mbox_command(qpti, param, 0) ||
(param[0] != MBOX_COMMAND_COMPLETE)) {
- printk(KERN_EMERG "qlogicisp : scsi bus reset failure: %x\n", param[0]);
+ printk(KERN_EMERG "qlogicisp%d: scsi bus reset failure: %x\n",
+ qpti->qpti_id, param[0]);
return_status = FAILED;
}
@@ -1454,22 +1459,25 @@ static int __devinit qpti_sbus_probe(struct of_device *dev, const struct of_devi
if (qlogicpti_reset_hardware(host))
goto fail_unmap_queues;
- if (scsi_add_host(host, &dev->dev))
- goto fail_unmap_queues;
-
printk("(Firmware v%d.%d.%d)", qpti->fware_majrev,
qpti->fware_minrev, qpti->fware_micrev);
fcode = of_get_property(dp, "isp-fcode", NULL);
if (fcode && fcode[0])
- printk("(Firmware %s)", fcode);
+ printk("(FCode %s)", fcode);
if (of_find_property(dp, "differential", NULL) != NULL)
qpti->differential = 1;
- printk (" [%s Wide, using %s interface]\n",
+ printk("\nqlogicpti%d: [%s Wide, using %s interface]\n",
+ qpti->qpti_id,
(qpti->ultra ? "Ultra" : "Fast"),
(qpti->differential ? "differential" : "single ended"));
+ if (scsi_add_host(host, &dev->dev)) {
+ printk("qlogicpti%d: Failed scsi_add_host\n", qpti->qpti_id);
+ goto fail_unmap_queues;
+ }
+
dev_set_drvdata(&sdev->ofdev.dev, qpti);
qpti_chain_add(qpti);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-13 23:32:19 +0000