diff options
Diffstat (limited to 'drivers/scsi/qlogicpti.h')
| -rw-r--r-- | drivers/scsi/qlogicpti.h | 508 |
1 files changed, 508 insertions, 0 deletions
diff --git a/drivers/scsi/qlogicpti.h b/drivers/scsi/qlogicpti.h new file mode 100644 index 00000000000..6cd1c0771d2 --- /dev/null +++ b/drivers/scsi/qlogicpti.h @@ -0,0 +1,508 @@ +/* qlogicpti.h: Performance Technologies QlogicISP sbus card defines. + * + * Copyright (C) 1996 David S. Miller (davem@caipfs.rutgers.edu) + */ + +#ifndef _QLOGICPTI_H +#define _QLOGICPTI_H + +/* Qlogic/SBUS controller registers. */ +#define SBUS_CFG1 0x006UL +#define SBUS_CTRL 0x008UL +#define SBUS_STAT 0x00aUL +#define SBUS_SEMAPHORE 0x00cUL +#define CMD_DMA_CTRL 0x022UL +#define DATA_DMA_CTRL 0x042UL +#define MBOX0 0x080UL +#define MBOX1 0x082UL +#define MBOX2 0x084UL +#define MBOX3 0x086UL +#define MBOX4 0x088UL +#define MBOX5 0x08aUL +#define CPU_CMD 0x214UL +#define CPU_ORIDE 0x224UL +#define CPU_PCTRL 0x272UL +#define CPU_PDIFF 0x276UL +#define RISC_PSR 0x420UL +#define RISC_MTREG 0x42EUL +#define HCCTRL 0x440UL + +/* SCSI parameters for this driver. */ +#define MAX_TARGETS 16 +#define MAX_LUNS 8 + +/* With the qlogic interface, every queue slot can hold a SCSI + * command with up to 4 scatter/gather entries. If we need more + * than 4 entries, continuation entries can be used that hold + * another 7 entries each. Unlike for other drivers, this means + * that the maximum number of scatter/gather entries we can + * support at any given time is a function of the number of queue + * slots available. That is, host->can_queue and host->sg_tablesize + * are dynamic and _not_ independent. This all works fine because + * requests are queued serially and the scatter/gather limit is + * determined for each queue request anew. + */ +#define QLOGICPTI_REQ_QUEUE_LEN 255 /* must be power of two - 1 */ +#define QLOGICPTI_MAX_SG(ql) (4 + ((ql) > 0) ? 7*((ql) - 1) : 0) + +/* mailbox command complete status codes */ +#define MBOX_COMMAND_COMPLETE 0x4000 +#define INVALID_COMMAND 0x4001 +#define HOST_INTERFACE_ERROR 0x4002 +#define TEST_FAILED 0x4003 +#define COMMAND_ERROR 0x4005 +#define COMMAND_PARAM_ERROR 0x4006 + +/* async event status codes */ +#define ASYNC_SCSI_BUS_RESET 0x8001 +#define SYSTEM_ERROR 0x8002 +#define REQUEST_TRANSFER_ERROR 0x8003 +#define RESPONSE_TRANSFER_ERROR 0x8004 +#define REQUEST_QUEUE_WAKEUP 0x8005 +#define EXECUTION_TIMEOUT_RESET 0x8006 + +/* Am I fucking pedantic or what? */ +struct Entry_header { +#ifdef __BIG_ENDIAN + u8 entry_cnt; + u8 entry_type; + u8 flags; + u8 sys_def_1; +#else /* __LITTLE_ENDIAN */ + u8 entry_type; + u8 entry_cnt; + u8 sys_def_1; + u8 flags; +#endif +}; + +/* entry header type commands */ +#define ENTRY_COMMAND 1 +#define ENTRY_CONTINUATION 2 +#define ENTRY_STATUS 3 +#define ENTRY_MARKER 4 +#define ENTRY_EXTENDED_COMMAND 5 + +/* entry header flag definitions */ +#define EFLAG_CONTINUATION 1 +#define EFLAG_BUSY 2 +#define EFLAG_BAD_HEADER 4 +#define EFLAG_BAD_PAYLOAD 8 + +struct dataseg { + u32 d_base; + u32 d_count; +}; + +struct Command_Entry { + struct Entry_header hdr; + u32 handle; +#ifdef __BIG_ENDIAN + u8 target_id; + u8 target_lun; +#else /* __LITTLE_ENDIAN */ + u8 target_lun; + u8 target_id; +#endif + u16 cdb_length; + u16 control_flags; + u16 rsvd; + u16 time_out; + u16 segment_cnt; + u8 cdb[12]; + struct dataseg dataseg[4]; +}; + +/* command entry control flag definitions */ +#define CFLAG_NODISC 0x01 +#define CFLAG_HEAD_TAG 0x02 +#define CFLAG_ORDERED_TAG 0x04 +#define CFLAG_SIMPLE_TAG 0x08 +#define CFLAG_TAR_RTN 0x10 +#define CFLAG_READ 0x20 +#define CFLAG_WRITE 0x40 + +struct Ext_Command_Entry { + struct Entry_header hdr; + u32 handle; +#ifdef __BIG_ENDIAN + u8 target_id; + u8 target_lun; +#else /* __LITTLE_ENDIAN */ + u8 target_lun; + u8 target_id; +#endif + u16 cdb_length; + u16 control_flags; + u16 rsvd; + u16 time_out; + u16 segment_cnt; + u8 cdb[44]; +}; + +struct Continuation_Entry { + struct Entry_header hdr; + u32 reserved; + struct dataseg dataseg[7]; +}; + +struct Marker_Entry { + struct Entry_header hdr; + u32 reserved; +#ifdef __BIG_ENDIAN + u8 target_id; + u8 target_lun; +#else /* __LITTLE_ENDIAN */ + u8 target_lun; + u8 target_id; +#endif +#ifdef __BIG_ENDIAN + u8 rsvd; + u8 modifier; +#else /* __LITTLE_ENDIAN */ + u8 modifier; + u8 rsvd; +#endif + u8 rsvds[52]; +}; + +/* marker entry modifier definitions */ +#define SYNC_DEVICE 0 +#define SYNC_TARGET 1 +#define SYNC_ALL 2 + +struct Status_Entry { + struct Entry_header hdr; + u32 handle; + u16 scsi_status; + u16 completion_status; + u16 state_flags; + u16 status_flags; + u16 time; + u16 req_sense_len; + u32 residual; + u8 rsvd[8]; + u8 req_sense_data[32]; +}; + +/* status entry completion status definitions */ +#define CS_COMPLETE 0x0000 +#define CS_INCOMPLETE 0x0001 +#define CS_DMA_ERROR 0x0002 +#define CS_TRANSPORT_ERROR 0x0003 +#define CS_RESET_OCCURRED 0x0004 +#define CS_ABORTED 0x0005 +#define CS_TIMEOUT 0x0006 +#define CS_DATA_OVERRUN 0x0007 +#define CS_COMMAND_OVERRUN 0x0008 +#define CS_STATUS_OVERRUN 0x0009 +#define CS_BAD_MESSAGE 0x000a +#define CS_NO_MESSAGE_OUT 0x000b +#define CS_EXT_ID_FAILED 0x000c +#define CS_IDE_MSG_FAILED 0x000d +#define CS_ABORT_MSG_FAILED 0x000e +#define CS_REJECT_MSG_FAILED 0x000f +#define CS_NOP_MSG_FAILED 0x0010 +#define CS_PARITY_ERROR_MSG_FAILED 0x0011 +#define CS_DEVICE_RESET_MSG_FAILED 0x0012 +#define CS_ID_MSG_FAILED 0x0013 +#define CS_UNEXP_BUS_FREE 0x0014 +#define CS_DATA_UNDERRUN 0x0015 +#define CS_BUS_RESET 0x001c + +/* status entry state flag definitions */ +#define SF_GOT_BUS 0x0100 +#define SF_GOT_TARGET 0x0200 +#define SF_SENT_CDB 0x0400 +#define SF_TRANSFERRED_DATA 0x0800 +#define SF_GOT_STATUS 0x1000 +#define SF_GOT_SENSE 0x2000 + +/* status entry status flag definitions */ +#define STF_DISCONNECT 0x0001 +#define STF_SYNCHRONOUS 0x0002 +#define STF_PARITY_ERROR 0x0004 +#define STF_BUS_RESET 0x0008 +#define STF_DEVICE_RESET 0x0010 +#define STF_ABORTED 0x0020 +#define STF_TIMEOUT 0x0040 +#define STF_NEGOTIATION 0x0080 + +/* mailbox commands */ +#define MBOX_NO_OP 0x0000 +#define MBOX_LOAD_RAM 0x0001 +#define MBOX_EXEC_FIRMWARE 0x0002 +#define MBOX_DUMP_RAM 0x0003 +#define MBOX_WRITE_RAM_WORD 0x0004 +#define MBOX_READ_RAM_WORD 0x0005 +#define MBOX_MAILBOX_REG_TEST 0x0006 +#define MBOX_VERIFY_CHECKSUM 0x0007 +#define MBOX_ABOUT_FIRMWARE 0x0008 +#define MBOX_CHECK_FIRMWARE 0x000e +#define MBOX_INIT_REQ_QUEUE 0x0010 +#define MBOX_INIT_RES_QUEUE 0x0011 +#define MBOX_EXECUTE_IOCB 0x0012 +#define MBOX_WAKE_UP 0x0013 +#define MBOX_STOP_FIRMWARE 0x0014 +#define MBOX_ABORT 0x0015 +#define MBOX_ABORT_DEVICE 0x0016 +#define MBOX_ABORT_TARGET 0x0017 +#define MBOX_BUS_RESET 0x0018 +#define MBOX_STOP_QUEUE 0x0019 +#define MBOX_START_QUEUE 0x001a +#define MBOX_SINGLE_STEP_QUEUE 0x001b +#define MBOX_ABORT_QUEUE 0x001c +#define MBOX_GET_DEV_QUEUE_STATUS 0x001d +#define MBOX_GET_FIRMWARE_STATUS 0x001f +#define MBOX_GET_INIT_SCSI_ID 0x0020 +#define MBOX_GET_SELECT_TIMEOUT 0x0021 +#define MBOX_GET_RETRY_COUNT 0x0022 +#define MBOX_GET_TAG_AGE_LIMIT 0x0023 +#define MBOX_GET_CLOCK_RATE 0x0024 +#define MBOX_GET_ACT_NEG_STATE 0x0025 +#define MBOX_GET_ASYNC_DATA_SETUP_TIME 0x0026 +#define MBOX_GET_SBUS_PARAMS 0x0027 +#define MBOX_GET_TARGET_PARAMS 0x0028 +#define MBOX_GET_DEV_QUEUE_PARAMS 0x0029 +#define MBOX_SET_INIT_SCSI_ID 0x0030 +#define MBOX_SET_SELECT_TIMEOUT 0x0031 +#define MBOX_SET_RETRY_COUNT 0x0032 +#define MBOX_SET_TAG_AGE_LIMIT 0x0033 +#define MBOX_SET_CLOCK_RATE 0x0034 +#define MBOX_SET_ACTIVE_NEG_STATE 0x0035 +#define MBOX_SET_ASYNC_DATA_SETUP_TIME 0x0036 +#define MBOX_SET_SBUS_CONTROL_PARAMS 0x0037 +#define MBOX_SET_TARGET_PARAMS 0x0038 +#define MBOX_SET_DEV_QUEUE_PARAMS 0x0039 + +struct host_param { + u_short initiator_scsi_id; + u_short bus_reset_delay; + u_short retry_count; + u_short retry_delay; + u_short async_data_setup_time; + u_short req_ack_active_negation; + u_short data_line_active_negation; + u_short data_dma_burst_enable; + u_short command_dma_burst_enable; + u_short tag_aging; + u_short selection_timeout; + u_short max_queue_depth; +}; + +/* + * Device Flags: + * + * Bit Name + * --------- + * 7 Disconnect Privilege + * 6 Parity Checking + * 5 Wide Data Transfers + * 4 Synchronous Data Transfers + * 3 Tagged Queuing + * 2 Automatic Request Sense + * 1 Stop Queue on Check Condition + * 0 Renegotiate on Error + */ + +struct dev_param { + u_short device_flags; + u_short execution_throttle; + u_short synchronous_period; + u_short synchronous_offset; + u_short device_enable; + u_short reserved; /* pad */ +}; + +/* + * The result queue can be quite a bit smaller since continuation entries + * do not show up there: + */ +#define RES_QUEUE_LEN 255 /* Must be power of two - 1 */ +#define QUEUE_ENTRY_LEN 64 + +#define NEXT_REQ_PTR(wheee) (((wheee) + 1) & QLOGICPTI_REQ_QUEUE_LEN) +#define NEXT_RES_PTR(wheee) (((wheee) + 1) & RES_QUEUE_LEN) +#define PREV_REQ_PTR(wheee) (((wheee) - 1) & QLOGICPTI_REQ_QUEUE_LEN) +#define PREV_RES_PTR(wheee) (((wheee) - 1) & RES_QUEUE_LEN) + +struct pti_queue_entry { + char __opaque[QUEUE_ENTRY_LEN]; +}; + +struct scsi_cmnd; + +/* Software state for the driver. */ +struct qlogicpti { + /* These are the hot elements in the cache, so they come first. */ + void __iomem *qregs; /* Adapter registers */ + struct pti_queue_entry *res_cpu; /* Ptr to RESPONSE bufs (CPU) */ + struct pti_queue_entry *req_cpu; /* Ptr to REQUEST bufs (CPU) */ + + u_int req_in_ptr; /* index of next request slot */ + u_int res_out_ptr; /* index of next result slot */ + long send_marker; /* must we send a marker? */ + struct sbus_dev *sdev; + unsigned long __pad; + + int cmd_count[MAX_TARGETS]; + unsigned long tag_ages[MAX_TARGETS]; + + /* The cmd->handler is only 32-bits, so that things work even on monster + * Ex000 sparc64 machines with >4GB of ram we just keep track of the + * scsi command pointers here. This is essentially what Matt Jacob does. -DaveM + */ + struct scsi_cmnd *cmd_slots[QLOGICPTI_REQ_QUEUE_LEN + 1]; + + /* The rest of the elements are unimportant for performance. */ + struct qlogicpti *next; + __u32 res_dvma; /* Ptr to RESPONSE bufs (DVMA)*/ + __u32 req_dvma; /* Ptr to REQUEST bufs (DVMA) */ + u_char fware_majrev, fware_minrev, fware_micrev; + struct Scsi_Host *qhost; + int qpti_id; + int scsi_id; + int prom_node; + char prom_name[64]; + int irq; + char differential, ultra, clock; + unsigned char bursts; + struct host_param host_param; + struct dev_param dev_param[MAX_TARGETS]; + + void __iomem *sreg; +#define SREG_TPOWER 0x80 /* State of termpwr */ +#define SREG_FUSE 0x40 /* State of on board fuse */ +#define SREG_PDISAB 0x20 /* Disable state for power on */ +#define SREG_DSENSE 0x10 /* Sense for differential */ +#define SREG_IMASK 0x0c /* Interrupt level */ +#define SREG_SPMASK 0x03 /* Mask for switch pack */ + unsigned char swsreg; + unsigned int + gotirq : 1, /* this instance got an irq */ + is_pti : 1, /* Non-zero if this is a PTI board. */ + sbits : 16; /* syncmode known bits */ +}; + +/* How to twiddle them bits... */ + +/* SBUS config register one. */ +#define SBUS_CFG1_EPAR 0x0100 /* Enable parity checking */ +#define SBUS_CFG1_FMASK 0x00f0 /* Forth code cycle mask */ +#define SBUS_CFG1_BENAB 0x0004 /* Burst dvma enable */ +#define SBUS_CFG1_B64 0x0003 /* Enable 64byte bursts */ +#define SBUS_CFG1_B32 0x0002 /* Enable 32byte bursts */ +#define SBUS_CFG1_B16 0x0001 /* Enable 16byte bursts */ +#define SBUS_CFG1_B8 0x0008 /* Enable 8byte bursts */ + +/* SBUS control register */ +#define SBUS_CTRL_EDIRQ 0x0020 /* Enable Data DVMA Interrupts */ +#define SBUS_CTRL_ECIRQ 0x0010 /* Enable Command DVMA Interrupts */ +#define SBUS_CTRL_ESIRQ 0x0008 /* Enable SCSI Processor Interrupts */ +#define SBUS_CTRL_ERIRQ 0x0004 /* Enable RISC Processor Interrupts */ +#define SBUS_CTRL_GENAB 0x0002 /* Global Interrupt Enable */ +#define SBUS_CTRL_RESET 0x0001 /* Soft Reset */ + +/* SBUS status register */ +#define SBUS_STAT_DINT 0x0020 /* Data DVMA IRQ pending */ +#define SBUS_STAT_CINT 0x0010 /* Command DVMA IRQ pending */ +#define SBUS_STAT_SINT 0x0008 /* SCSI Processor IRQ pending */ +#define SBUS_STAT_RINT 0x0004 /* RISC Processor IRQ pending */ +#define SBUS_STAT_GINT 0x0002 /* Global IRQ pending */ + +/* SBUS semaphore register */ +#define SBUS_SEMAPHORE_STAT 0x0002 /* Semaphore status bit */ +#define SBUS_SEMAPHORE_LCK 0x0001 /* Semaphore lock bit */ + +/* DVMA control register */ +#define DMA_CTRL_CSUSPEND 0x0010 /* DMA channel suspend */ +#define DMA_CTRL_CCLEAR 0x0008 /* DMA channel clear and reset */ +#define DMA_CTRL_FCLEAR 0x0004 /* DMA fifo clear */ +#define DMA_CTRL_CIRQ 0x0002 /* DMA irq clear */ +#define DMA_CTRL_DMASTART 0x0001 /* DMA transfer start */ + +/* SCSI processor override register */ +#define CPU_ORIDE_ETRIG 0x8000 /* External trigger enable */ +#define CPU_ORIDE_STEP 0x4000 /* Single step mode enable */ +#define CPU_ORIDE_BKPT 0x2000 /* Breakpoint reg enable */ +#define CPU_ORIDE_PWRITE 0x1000 /* SCSI pin write enable */ +#define CPU_ORIDE_OFORCE 0x0800 /* Force outputs on */ +#define CPU_ORIDE_LBACK 0x0400 /* SCSI loopback enable */ +#define CPU_ORIDE_PTEST 0x0200 /* Parity test enable */ +#define CPU_ORIDE_TENAB 0x0100 /* SCSI pins tristate enable */ +#define CPU_ORIDE_TPINS 0x0080 /* SCSI pins enable */ +#define CPU_ORIDE_FRESET 0x0008 /* FIFO reset */ +#define CPU_ORIDE_CTERM 0x0004 /* Command terminate */ +#define CPU_ORIDE_RREG 0x0002 /* Reset SCSI processor regs */ +#define CPU_ORIDE_RMOD 0x0001 /* Reset SCSI processor module */ + +/* SCSI processor commands */ +#define CPU_CMD_BRESET 0x300b /* Reset SCSI bus */ + +/* SCSI processor pin control register */ +#define CPU_PCTRL_PVALID 0x8000 /* Phase bits are valid */ +#define CPU_PCTRL_PHI 0x0400 /* Parity bit high */ +#define CPU_PCTRL_PLO 0x0200 /* Parity bit low */ +#define CPU_PCTRL_REQ 0x0100 /* REQ bus signal */ +#define CPU_PCTRL_ACK 0x0080 /* ACK bus signal */ +#define CPU_PCTRL_RST 0x0040 /* RST bus signal */ +#define CPU_PCTRL_BSY 0x0020 /* BSY bus signal */ +#define CPU_PCTRL_SEL 0x0010 /* SEL bus signal */ +#define CPU_PCTRL_ATN 0x0008 /* ATN bus signal */ +#define CPU_PCTRL_MSG 0x0004 /* MSG bus signal */ +#define CPU_PCTRL_CD 0x0002 /* CD bus signal */ +#define CPU_PCTRL_IO 0x0001 /* IO bus signal */ + +/* SCSI processor differential pins register */ +#define CPU_PDIFF_SENSE 0x0200 /* Differential sense */ +#define CPU_PDIFF_MODE 0x0100 /* Differential mode */ +#define CPU_PDIFF_OENAB 0x0080 /* Outputs enable */ +#define CPU_PDIFF_PMASK 0x007c /* Differential control pins */ +#define CPU_PDIFF_TGT 0x0002 /* Target mode enable */ +#define CPU_PDIFF_INIT 0x0001 /* Initiator mode enable */ + +/* RISC processor status register */ +#define RISC_PSR_FTRUE 0x8000 /* Force true */ +#define RISC_PSR_LCD 0x4000 /* Loop counter shows done status */ +#define RISC_PSR_RIRQ 0x2000 /* RISC irq status */ +#define RISC_PSR_TOFLOW 0x1000 /* Timer overflow (rollover) */ +#define RISC_PSR_AOFLOW 0x0800 /* Arithmetic overflow */ +#define RISC_PSR_AMSB 0x0400 /* Arithmetic big endian */ +#define RISC_PSR_ACARRY 0x0200 /* Arithmetic carry */ +#define RISC_PSR_AZERO 0x0100 /* Arithmetic zero */ +#define RISC_PSR_ULTRA 0x0020 /* Ultra mode */ +#define RISC_PSR_DIRQ 0x0010 /* DVMA interrupt */ +#define RISC_PSR_SIRQ 0x0008 /* SCSI processor interrupt */ +#define RISC_PSR_HIRQ 0x0004 /* Host interrupt */ +#define RISC_PSR_IPEND 0x0002 /* Interrupt pending */ +#define RISC_PSR_FFALSE 0x0001 /* Force false */ + +/* RISC processor memory timing register */ +#define RISC_MTREG_P1DFLT 0x1200 /* Default read/write timing, pg1 */ +#define RISC_MTREG_P0DFLT 0x0012 /* Default read/write timing, pg0 */ +#define RISC_MTREG_P1ULTRA 0x2300 /* Ultra-mode rw timing, pg1 */ +#define RISC_MTREG_P0ULTRA 0x0023 /* Ultra-mode rw timing, pg0 */ + +/* Host command/ctrl register */ +#define HCCTRL_NOP 0x0000 /* CMD: No operation */ +#define HCCTRL_RESET 0x1000 /* CMD: Reset RISC cpu */ +#define HCCTRL_PAUSE 0x2000 /* CMD: Pause RISC cpu */ +#define HCCTRL_REL 0x3000 /* CMD: Release paused RISC cpu */ +#define HCCTRL_STEP 0x4000 /* CMD: Single step RISC cpu */ +#define HCCTRL_SHIRQ 0x5000 /* CMD: Set host irq */ +#define HCCTRL_CHIRQ 0x6000 /* CMD: Clear host irq */ +#define HCCTRL_CRIRQ 0x7000 /* CMD: Clear RISC cpu irq */ +#define HCCTRL_BKPT 0x8000 /* CMD: Breakpoint enables change */ +#define HCCTRL_TMODE 0xf000 /* CMD: Enable test mode */ +#define HCCTRL_HIRQ 0x0080 /* Host IRQ pending */ +#define HCCTRL_RRIP 0x0040 /* RISC cpu reset in happening now */ +#define HCCTRL_RPAUSED 0x0020 /* RISC cpu is paused now */ +#define HCCTRL_EBENAB 0x0010 /* External breakpoint enable */ +#define HCCTRL_B1ENAB 0x0008 /* Breakpoint 1 enable */ +#define HCCTRL_B0ENAB 0x0004 /* Breakpoint 0 enable */ + +/* For our interrupt engine. */ +#define for_each_qlogicpti(qp) \ + for((qp) = qptichain; (qp); (qp) = (qp)->next) + +#endif /* !(_QLOGICPTI_H) */ |