diff options
Diffstat (limited to 'drivers/scsi/sata_via.c')
-rw-r--r-- | drivers/scsi/sata_via.c | 47 |
1 files changed, 25 insertions, 22 deletions
diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 128b996b07b..c76215692da 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -41,7 +41,7 @@ #include <linux/init.h> #include <linux/blkdev.h> #include <linux/delay.h> -#include "scsi.h" +#include <linux/device.h> #include <scsi/scsi_host.h> #include <linux/libata.h> #include <asm/io.h> @@ -75,7 +75,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg); static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); -static struct pci_device_id svia_pci_tbl[] = { +static const struct pci_device_id svia_pci_tbl[] = { { 0x1106, 0x3149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 }, { 0x1106, 0x3249, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6421 }, @@ -89,7 +89,7 @@ static struct pci_driver svia_pci_driver = { .remove = ata_pci_remove_one, }; -static Scsi_Host_Template svia_sht = { +static struct scsi_host_template svia_sht = { .module = THIS_MODULE, .name = DRV_NAME, .ioctl = ata_scsi_ioctl, @@ -109,7 +109,7 @@ static Scsi_Host_Template svia_sht = { .ordered_flush = 1, }; -static struct ata_port_operations svia_sata_ops = { +static const struct ata_port_operations svia_sata_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, @@ -212,7 +212,7 @@ static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev) struct ata_probe_ent *probe_ent; struct ata_port_info *ppi = &svia_port_info; - probe_ent = ata_pci_init_native_mode(pdev, &ppi); + probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) return NULL; @@ -259,15 +259,15 @@ static void svia_configure(struct pci_dev *pdev) u8 tmp8; pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8); - printk(KERN_INFO DRV_NAME "(%s): routed to hard irq line %d\n", - pci_name(pdev), + dev_printk(KERN_INFO, &pdev->dev, "routed to hard irq line %d\n", (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f); /* make sure SATA channels are enabled */ pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8); if ((tmp8 & ALL_PORTS) != ALL_PORTS) { - printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channels (0x%x)\n", - pci_name(pdev), (int) tmp8); + dev_printk(KERN_DEBUG, &pdev->dev, + "enabling SATA channels (0x%x)\n", + (int) tmp8); tmp8 |= ALL_PORTS; pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8); } @@ -275,8 +275,9 @@ static void svia_configure(struct pci_dev *pdev) /* make sure interrupts for each channel sent to us */ pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8); if ((tmp8 & ALL_PORTS) != ALL_PORTS) { - printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel interrupts (0x%x)\n", - pci_name(pdev), (int) tmp8); + dev_printk(KERN_DEBUG, &pdev->dev, + "enabling SATA channel interrupts (0x%x)\n", + (int) tmp8); tmp8 |= ALL_PORTS; pci_write_config_byte(pdev, SATA_INT_GATE, tmp8); } @@ -284,8 +285,9 @@ static void svia_configure(struct pci_dev *pdev) /* make sure native mode is enabled */ pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8); if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) { - printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel native mode (0x%x)\n", - pci_name(pdev), (int) tmp8); + dev_printk(KERN_DEBUG, &pdev->dev, + "enabling SATA channel native mode (0x%x)\n", + (int) tmp8); tmp8 |= NATIVE_MODE_ALL; pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8); } @@ -303,7 +305,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) u8 tmp8; if (!printed_version++) - printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); rc = pci_enable_device(pdev); if (rc) @@ -318,8 +320,9 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (board_id == vt6420) { pci_read_config_byte(pdev, SATA_PATA_SHARING, &tmp8); if (tmp8 & SATA_2DEV) { - printk(KERN_ERR DRV_NAME "(%s): SATA master/slave not supported (0x%x)\n", - pci_name(pdev), (int) tmp8); + dev_printk(KERN_ERR, &pdev->dev, + "SATA master/slave not supported (0x%x)\n", + (int) tmp8); rc = -EIO; goto err_out_regions; } @@ -332,10 +335,11 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++) if ((pci_resource_start(pdev, i) == 0) || (pci_resource_len(pdev, i) < bar_sizes[i])) { - printk(KERN_ERR DRV_NAME "(%s): invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n", - pci_name(pdev), i, - pci_resource_start(pdev, i), - pci_resource_len(pdev, i)); + dev_printk(KERN_ERR, &pdev->dev, + "invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n", + i, + pci_resource_start(pdev, i), + pci_resource_len(pdev, i)); rc = -ENODEV; goto err_out_regions; } @@ -353,8 +357,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent = vt6421_init_probe_ent(pdev); if (!probe_ent) { - printk(KERN_ERR DRV_NAME "(%s): out of memory\n", - pci_name(pdev)); + dev_printk(KERN_ERR, &pdev->dev, "out of memory\n"); rc = -ENOMEM; goto err_out_regions; } |