diff options
Diffstat (limited to 'drivers/scsi/scsi.c')
| -rw-r--r-- | drivers/scsi/scsi.c | 122 |
1 files changed, 15 insertions, 107 deletions
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 180676d7115..245ca99a641 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -55,6 +55,7 @@ #include <linux/interrupt.h> #include <linux/notifier.h> #include <linux/cpu.h> +#include <linux/mutex.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> @@ -69,7 +70,6 @@ #include "scsi_logging.h" static void scsi_done(struct scsi_cmnd *cmd); -static int scsi_retry_command(struct scsi_cmnd *cmd); /* * Definitions and constants. @@ -210,7 +210,7 @@ static struct scsi_host_cmd_pool scsi_cmd_dma_pool = { .gfp_mask = __GFP_DMA, }; -static DECLARE_MUTEX(host_cmd_pool_mutex); +static DEFINE_MUTEX(host_cmd_pool_mutex); static struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, gfp_t gfp_mask) @@ -331,7 +331,7 @@ int scsi_setup_command_freelist(struct Scsi_Host *shost) * Select a command slab for this host and create it if not * yet existant. */ - down(&host_cmd_pool_mutex); + mutex_lock(&host_cmd_pool_mutex); pool = (shost->unchecked_isa_dma ? &scsi_cmd_dma_pool : &scsi_cmd_pool); if (!pool->users) { pool->slab = kmem_cache_create(pool->name, @@ -343,7 +343,7 @@ int scsi_setup_command_freelist(struct Scsi_Host *shost) pool->users++; shost->cmd_pool = pool; - up(&host_cmd_pool_mutex); + mutex_unlock(&host_cmd_pool_mutex); /* * Get one backup command for this host. @@ -360,7 +360,7 @@ int scsi_setup_command_freelist(struct Scsi_Host *shost) kmem_cache_destroy(pool->slab); return -ENOMEM; fail: - up(&host_cmd_pool_mutex); + mutex_unlock(&host_cmd_pool_mutex); return -ENOMEM; } @@ -382,10 +382,10 @@ void scsi_destroy_command_freelist(struct Scsi_Host *shost) kmem_cache_free(shost->cmd_pool->slab, cmd); } - down(&host_cmd_pool_mutex); + mutex_lock(&host_cmd_pool_mutex); if (!--shost->cmd_pool->users) kmem_cache_destroy(shost->cmd_pool->slab); - up(&host_cmd_pool_mutex); + mutex_unlock(&host_cmd_pool_mutex); } #ifdef CONFIG_SCSI_LOGGING @@ -752,7 +752,7 @@ static void scsi_done(struct scsi_cmnd *cmd) * isn't running --- used by scsi_times_out */ void __scsi_done(struct scsi_cmnd *cmd) { - unsigned long flags; + struct request *rq = cmd->request; /* * Set the serial numbers back to zero @@ -763,71 +763,14 @@ void __scsi_done(struct scsi_cmnd *cmd) if (cmd->result) atomic_inc(&cmd->device->ioerr_cnt); + BUG_ON(!rq); + /* - * Next, enqueue the command into the done queue. - * It is a per-CPU queue, so we just disable local interrupts - * and need no spinlock. + * The uptodate/nbytes values don't matter, as we allow partial + * completes and thus will check this in the softirq callback */ - local_irq_save(flags); - list_add_tail(&cmd->eh_entry, &__get_cpu_var(scsi_done_q)); - raise_softirq_irqoff(SCSI_SOFTIRQ); - local_irq_restore(flags); -} - -/** - * scsi_softirq - Perform post-interrupt processing of finished SCSI commands. - * - * This is the consumer of the done queue. - * - * This is called with all interrupts enabled. This should reduce - * interrupt latency, stack depth, and reentrancy of the low-level - * drivers. - */ -static void scsi_softirq(struct softirq_action *h) -{ - int disposition; - LIST_HEAD(local_q); - - local_irq_disable(); - list_splice_init(&__get_cpu_var(scsi_done_q), &local_q); - local_irq_enable(); - - while (!list_empty(&local_q)) { - struct scsi_cmnd *cmd = list_entry(local_q.next, - struct scsi_cmnd, eh_entry); - /* The longest time any command should be outstanding is the - * per command timeout multiplied by the number of retries. - * - * For a typical command, this is 2.5 minutes */ - unsigned long wait_for - = cmd->allowed * cmd->timeout_per_command; - list_del_init(&cmd->eh_entry); - - disposition = scsi_decide_disposition(cmd); - if (disposition != SUCCESS && - time_before(cmd->jiffies_at_alloc + wait_for, jiffies)) { - sdev_printk(KERN_ERR, cmd->device, - "timing out command, waited %lus\n", - wait_for/HZ); - disposition = SUCCESS; - } - - scsi_log_completion(cmd, disposition); - switch (disposition) { - case SUCCESS: - scsi_finish_command(cmd); - break; - case NEEDS_RETRY: - scsi_retry_command(cmd); - break; - case ADD_TO_MLQUEUE: - scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY); - break; - default: - if (!scsi_eh_scmd_add(cmd, 0)) - scsi_finish_command(cmd); - } - } + rq->completion_data = cmd; + blk_complete_request(rq); } /* @@ -840,7 +783,7 @@ static void scsi_softirq(struct softirq_action *h) * level drivers should not become re-entrant as a result of * this. */ -static int scsi_retry_command(struct scsi_cmnd *cmd) +int scsi_retry_command(struct scsi_cmnd *cmd) { /* * Restore the SCSI command state. @@ -1273,38 +1216,6 @@ int scsi_device_cancel(struct scsi_device *sdev, int recovery) } EXPORT_SYMBOL(scsi_device_cancel); -#ifdef CONFIG_HOTPLUG_CPU -static int scsi_cpu_notify(struct notifier_block *self, - unsigned long action, void *hcpu) -{ - int cpu = (unsigned long)hcpu; - - switch(action) { - case CPU_DEAD: - /* Drain scsi_done_q. */ - local_irq_disable(); - list_splice_init(&per_cpu(scsi_done_q, cpu), - &__get_cpu_var(scsi_done_q)); - raise_softirq_irqoff(SCSI_SOFTIRQ); - local_irq_enable(); - break; - default: - break; - } - return NOTIFY_OK; -} - -static struct notifier_block __devinitdata scsi_cpu_nb = { - .notifier_call = scsi_cpu_notify, -}; - -#define register_scsi_cpu() register_cpu_notifier(&scsi_cpu_nb) -#define unregister_scsi_cpu() unregister_cpu_notifier(&scsi_cpu_nb) -#else -#define register_scsi_cpu() -#define unregister_scsi_cpu() -#endif /* CONFIG_HOTPLUG_CPU */ - MODULE_DESCRIPTION("SCSI core"); MODULE_LICENSE("GPL"); @@ -1338,8 +1249,6 @@ static int __init init_scsi(void) INIT_LIST_HEAD(&per_cpu(scsi_done_q, i)); devfs_mk_dir("scsi"); - open_softirq(SCSI_SOFTIRQ, scsi_softirq, NULL); - register_scsi_cpu(); printk(KERN_NOTICE "SCSI subsystem initialized\n"); return 0; @@ -1367,7 +1276,6 @@ static void __exit exit_scsi(void) devfs_remove("scsi"); scsi_exit_procfs(); scsi_exit_queue(); - unregister_scsi_cpu(); } subsys_initcall(init_scsi); |