diff options
Diffstat (limited to 'drivers/scsi/scsi_debug.c')
-rw-r--r-- | drivers/scsi/scsi_debug.c | 132 |
1 files changed, 127 insertions, 5 deletions
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 7b8b51bc29b..113232135d2 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -80,6 +80,8 @@ static const char *scsi_debug_version_date = "20141022"; #define INVALID_FIELD_IN_PARAM_LIST 0x26 #define UA_RESET_ASC 0x29 #define UA_CHANGED_ASC 0x2a +#define TARGET_CHANGED_ASC 0x3f +#define LUNS_CHANGED_ASCQ 0x0e #define INSUFF_RES_ASC 0x55 #define INSUFF_RES_ASCQ 0x3 #define POWER_ON_RESET_ASCQ 0x0 @@ -91,6 +93,8 @@ static const char *scsi_debug_version_date = "20141022"; #define THRESHOLD_EXCEEDED 0x5d #define LOW_POWER_COND_ON 0x5e #define MISCOMPARE_VERIFY_ASC 0x1d +#define MICROCODE_CHANGED_ASCQ 0x1 /* with TARGET_CHANGED_ASC */ +#define MICROCODE_CHANGED_WO_RESET_ASCQ 0x16 /* Additional Sense Code Qualifier (ASCQ) */ #define ACK_NAK_TO 0x3 @@ -180,7 +184,10 @@ static const char *scsi_debug_version_date = "20141022"; #define SDEBUG_UA_BUS_RESET 1 #define SDEBUG_UA_MODE_CHANGED 2 #define SDEBUG_UA_CAPACITY_CHANGED 3 -#define SDEBUG_NUM_UAS 4 +#define SDEBUG_UA_LUNS_CHANGED 4 +#define SDEBUG_UA_MICROCODE_CHANGED 5 /* simulate firmware change */ +#define SDEBUG_UA_MICROCODE_CHANGED_WO_RESET 6 +#define SDEBUG_NUM_UAS 7 /* for check_readiness() */ #define UAS_ONLY 1 /* check for UAs only */ @@ -326,6 +333,7 @@ static int resp_write_same_10(struct scsi_cmnd *, struct sdebug_dev_info *); static int resp_write_same_16(struct scsi_cmnd *, struct sdebug_dev_info *); static int resp_xdwriteread_10(struct scsi_cmnd *, struct sdebug_dev_info *); static int resp_comp_write(struct scsi_cmnd *, struct sdebug_dev_info *); +static int resp_write_buffer(struct scsi_cmnd *, struct sdebug_dev_info *); struct opcode_info_t { u8 num_attached; /* 0 if this is it (i.e. a leaf); use 0xff @@ -480,8 +488,9 @@ static const struct opcode_info_t opcode_info_arr[SDEB_I_LAST_ELEMENT + 1] = { {0, 0x53, 0, F_D_IN | F_D_OUT | FF_DIRECT_IO, resp_xdwriteread_10, NULL, {10, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0, 0} }, - {0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* WRITE_BUFFER */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} }, + {0, 0x3b, 0, F_D_OUT_MAYBE, resp_write_buffer, NULL, + {10, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc7, 0, 0, + 0, 0, 0, 0} }, /* WRITE_BUFFER */ {1, 0x41, 0, F_D_OUT_MAYBE | FF_DIRECT_IO, resp_write_same_10, write_same_iarr, {10, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0, 0} }, @@ -782,6 +791,22 @@ static int scsi_debug_ioctl(struct scsi_device *dev, int cmd, void __user *arg) /* return -ENOTTY; // correct return but upsets fdisk */ } +static void clear_luns_changed_on_target(struct sdebug_dev_info *devip) +{ + struct sdebug_host_info *sdhp; + struct sdebug_dev_info *dp; + + spin_lock(&sdebug_host_list_lock); + list_for_each_entry(sdhp, &sdebug_host_list, host_list) { + list_for_each_entry(dp, &sdhp->dev_info_list, dev_list) { + if ((devip->sdbg_host == dp->sdbg_host) && + (devip->target == dp->target)) + clear_bit(SDEBUG_UA_LUNS_CHANGED, dp->uas_bm); + } + } + spin_unlock(&sdebug_host_list_lock); +} + static int check_readiness(struct scsi_cmnd *SCpnt, int uas_only, struct sdebug_dev_info * devip) { @@ -817,6 +842,36 @@ static int check_readiness(struct scsi_cmnd *SCpnt, int uas_only, if (debug) cp = "capacity data changed"; break; + case SDEBUG_UA_MICROCODE_CHANGED: + mk_sense_buffer(SCpnt, UNIT_ATTENTION, + TARGET_CHANGED_ASC, MICROCODE_CHANGED_ASCQ); + if (debug) + cp = "microcode has been changed"; + break; + case SDEBUG_UA_MICROCODE_CHANGED_WO_RESET: + mk_sense_buffer(SCpnt, UNIT_ATTENTION, + TARGET_CHANGED_ASC, + MICROCODE_CHANGED_WO_RESET_ASCQ); + if (debug) + cp = "microcode has been changed without reset"; + break; + case SDEBUG_UA_LUNS_CHANGED: + /* + * SPC-3 behavior is to report a UNIT ATTENTION with + * ASC/ASCQ REPORTED LUNS DATA HAS CHANGED on every LUN + * on the target, until a REPORT LUNS command is + * received. SPC-4 behavior is to report it only once. + * NOTE: scsi_debug_scsi_level does not use the same + * values as struct scsi_device->scsi_level. + */ + if (scsi_debug_scsi_level >= 6) /* SPC-4 and above */ + clear_luns_changed_on_target(devip); + mk_sense_buffer(SCpnt, UNIT_ATTENTION, + TARGET_CHANGED_ASC, + LUNS_CHANGED_ASCQ); + if (debug) + cp = "reported luns data has changed"; + break; default: pr_warn("%s: unexpected unit attention code=%d\n", __func__, k); @@ -1623,7 +1678,7 @@ resp_rsup_opcodes(struct scsi_cmnd *scp, struct sdebug_dev_info *devip) req_opcode = cmd[3]; req_sa = get_unaligned_be16(cmd + 4); alloc_len = get_unaligned_be32(cmd + 6); - if (alloc_len < 4 && alloc_len > 0xffff) { + if (alloc_len < 4 || alloc_len > 0xffff) { mk_sense_invalid_fld(scp, SDEB_IN_CDB, 6, -1); return check_condition_result; } @@ -1631,7 +1686,7 @@ resp_rsup_opcodes(struct scsi_cmnd *scp, struct sdebug_dev_info *devip) a_len = 8192; else a_len = alloc_len; - arr = kzalloc((a_len < 256) ? 320 : a_len + 64, GFP_KERNEL); + arr = kzalloc((a_len < 256) ? 320 : a_len + 64, GFP_ATOMIC); if (NULL == arr) { mk_sense_buffer(scp, ILLEGAL_REQUEST, INSUFF_RES_ASC, INSUFF_RES_ASCQ); @@ -3033,6 +3088,55 @@ resp_write_same_16(struct scsi_cmnd *scp, struct sdebug_dev_info *devip) return resp_write_same(scp, lba, num, ei_lba, unmap, ndob); } +/* Note the mode field is in the same position as the (lower) service action + * field. For the Report supported operation codes command, SPC-4 suggests + * each mode of this command should be reported separately; for future. */ +static int +resp_write_buffer(struct scsi_cmnd *scp, struct sdebug_dev_info *devip) +{ + u8 *cmd = scp->cmnd; + struct scsi_device *sdp = scp->device; + struct sdebug_dev_info *dp; + u8 mode; + + mode = cmd[1] & 0x1f; + switch (mode) { + case 0x4: /* download microcode (MC) and activate (ACT) */ + /* set UAs on this device only */ + set_bit(SDEBUG_UA_BUS_RESET, devip->uas_bm); + set_bit(SDEBUG_UA_MICROCODE_CHANGED, devip->uas_bm); + break; + case 0x5: /* download MC, save and ACT */ + set_bit(SDEBUG_UA_MICROCODE_CHANGED_WO_RESET, devip->uas_bm); + break; + case 0x6: /* download MC with offsets and ACT */ + /* set UAs on most devices (LUs) in this target */ + list_for_each_entry(dp, + &devip->sdbg_host->dev_info_list, + dev_list) + if (dp->target == sdp->id) { + set_bit(SDEBUG_UA_BUS_RESET, dp->uas_bm); + if (devip != dp) + set_bit(SDEBUG_UA_MICROCODE_CHANGED, + dp->uas_bm); + } + break; + case 0x7: /* download MC with offsets, save, and ACT */ + /* set UA on all devices (LUs) in this target */ + list_for_each_entry(dp, + &devip->sdbg_host->dev_info_list, + dev_list) + if (dp->target == sdp->id) + set_bit(SDEBUG_UA_MICROCODE_CHANGED_WO_RESET, + dp->uas_bm); + break; + default: + /* do nothing for this command for other mode values */ + break; + } + return 0; +} + static int resp_comp_write(struct scsi_cmnd *scp, struct sdebug_dev_info *devip) { @@ -3229,6 +3333,7 @@ static int resp_report_luns(struct scsi_cmnd * scp, unsigned char arr[SDEBUG_RLUN_ARR_SZ]; unsigned char * max_addr; + clear_luns_changed_on_target(devip); alloc_len = cmd[9] + (cmd[8] << 8) + (cmd[7] << 16) + (cmd[6] << 24); shortish = (alloc_len < 4); if (shortish || (select_report > 2)) { @@ -4369,10 +4474,27 @@ static ssize_t max_luns_store(struct device_driver *ddp, const char *buf, size_t count) { int n; + bool changed; if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) { + changed = (scsi_debug_max_luns != n); scsi_debug_max_luns = n; sdebug_max_tgts_luns(); + if (changed && (scsi_debug_scsi_level >= 5)) { /* >= SPC-3 */ + struct sdebug_host_info *sdhp; + struct sdebug_dev_info *dp; + + spin_lock(&sdebug_host_list_lock); + list_for_each_entry(sdhp, &sdebug_host_list, + host_list) { + list_for_each_entry(dp, &sdhp->dev_info_list, + dev_list) { + set_bit(SDEBUG_UA_LUNS_CHANGED, + dp->uas_bm); + } + } + spin_unlock(&sdebug_host_list_lock); + } return count; } return -EINVAL; |