1 files changed, 92 insertions, 140 deletions

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 9db097a28a7..f7e316368c9 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -140,7 +140,7 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
 	cmd->result = 0;
 	spin_lock_irqsave(q->queue_lock, flags);
 	blk_requeue_request(q, cmd->request);
-	kblockd_schedule_work(q, &device->requeue_work);
+	kblockd_schedule_work(&device->requeue_work);
 	spin_unlock_irqrestore(q->queue_lock, flags);
 }
 
@@ -195,6 +195,7 @@ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
 	req = blk_get_request(sdev->request_queue, write, __GFP_WAIT);
 	if (!req)
 		return ret;
+	blk_rq_set_block_pc(req);
 
 	if (bufflen &&	blk_rq_map_kern(sdev->request_queue, req,
 					buffer, bufflen, __GFP_WAIT))
@@ -206,7 +207,6 @@ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
 	req->sense_len = 0;
 	req->retries = retries;
 	req->timeout = timeout;
-	req->cmd_type = REQ_TYPE_BLOCK_PC;
 	req->cmd_flags |= flags | REQ_QUIET | REQ_PREEMPT;
 
 	/*
@@ -512,68 +512,6 @@ void scsi_run_host_queues(struct Scsi_Host *shost)
 		scsi_run_queue(sdev->request_queue);
 }
 
-static void __scsi_release_buffers(struct scsi_cmnd *, int);
-
-/*
- * Function:    scsi_end_request()
- *
- * Purpose:     Post-processing of completed commands (usually invoked at end
- *		of upper level post-processing and scsi_io_completion).
- *
- * Arguments:   cmd	 - command that is complete.
- *              error    - 0 if I/O indicates success, < 0 for I/O error.
- *              bytes    - number of bytes of completed I/O
- *		requeue  - indicates whether we should requeue leftovers.
- *
- * Lock status: Assumed that lock is not held upon entry.
- *
- * Returns:     cmd if requeue required, NULL otherwise.
- *
- * Notes:       This is called for block device requests in order to
- *              mark some number of sectors as complete.
- * 
- *		We are guaranteeing that the request queue will be goosed
- *		at some point during this call.
- * Notes:	If cmd was requeued, upon return it will be a stale pointer.
- */
-static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int error,
-					  int bytes, int requeue)
-{
-	struct request_queue *q = cmd->device->request_queue;
-	struct request *req = cmd->request;
-
-	/*
-	 * If there are blocks left over at the end, set up the command
-	 * to queue the remainder of them.
-	 */
-	if (blk_end_request(req, error, bytes)) {
-		/* kill remainder if no retrys */
-		if (error && scsi_noretry_cmd(cmd))
-			blk_end_request_all(req, error);
-		else {
-			if (requeue) {
-				/*
-				 * Bleah.  Leftovers again.  Stick the
-				 * leftovers in the front of the
-				 * queue, and goose the queue again.
-				 */
-				scsi_release_buffers(cmd);
-				scsi_requeue_command(q, cmd);
-				cmd = NULL;
-			}
-			return cmd;
-		}
-	}
-
-	/*
-	 * This will goose the queue request function at the end, so we don't
-	 * need to worry about launching another command.
-	 */
-	__scsi_release_buffers(cmd, 0);
-	scsi_next_command(cmd);
-	return NULL;
-}
-
 static inline unsigned int scsi_sgtable_index(unsigned short nents)
 {
 	unsigned int index;
@@ -625,30 +563,10 @@ static void scsi_free_sgtable(struct scsi_data_buffer *sdb)
 	__sg_free_table(&sdb->table, SCSI_MAX_SG_SEGMENTS, scsi_sg_free);
 }
 
-static void __scsi_release_buffers(struct scsi_cmnd *cmd, int do_bidi_check)
-{
-
-	if (cmd->sdb.table.nents)
-		scsi_free_sgtable(&cmd->sdb);
-
-	memset(&cmd->sdb, 0, sizeof(cmd->sdb));
-
-	if (do_bidi_check && scsi_bidi_cmnd(cmd)) {
-		struct scsi_data_buffer *bidi_sdb =
-			cmd->request->next_rq->special;
-		scsi_free_sgtable(bidi_sdb);
-		kmem_cache_free(scsi_sdb_cache, bidi_sdb);
-		cmd->request->next_rq->special = NULL;
-	}
-
-	if (scsi_prot_sg_count(cmd))
-		scsi_free_sgtable(cmd->prot_sdb);
-}
-
 /*
  * Function:    scsi_release_buffers()
  *
- * Purpose:     Completion processing for block device I/O requests.
+ * Purpose:     Free resources allocate for a scsi_command.
  *
  * Arguments:   cmd	- command that we are bailing.
  *
@@ -659,15 +577,29 @@ static void __scsi_release_buffers(struct scsi_cmnd *cmd, int do_bidi_check)
  * Notes:       In the event that an upper level driver rejects a
  *		command, we must release resources allocated during
  *		the __init_io() function.  Primarily this would involve
- *		the scatter-gather table, and potentially any bounce
- *		buffers.
+ *		the scatter-gather table.
  */
 void scsi_release_buffers(struct scsi_cmnd *cmd)
 {
-	__scsi_release_buffers(cmd, 1);
+	if (cmd->sdb.table.nents)
+		scsi_free_sgtable(&cmd->sdb);
+
+	memset(&cmd->sdb, 0, sizeof(cmd->sdb));
+
+	if (scsi_prot_sg_count(cmd))
+		scsi_free_sgtable(cmd->prot_sdb);
 }
 EXPORT_SYMBOL(scsi_release_buffers);
 
+static void scsi_release_bidi_buffers(struct scsi_cmnd *cmd)
+{
+	struct scsi_data_buffer *bidi_sdb = cmd->request->next_rq->special;
+
+	scsi_free_sgtable(bidi_sdb);
+	kmem_cache_free(scsi_sdb_cache, bidi_sdb);
+	cmd->request->next_rq->special = NULL;
+}
+
 /**
  * __scsi_error_from_host_byte - translate SCSI error code into errno
  * @cmd:	SCSI command (unused)
@@ -725,16 +657,9 @@ static int __scsi_error_from_host_byte(struct scsi_cmnd *cmd, int result)
  *
  * Returns:     Nothing
  *
- * Notes:       This function is matched in terms of capabilities to
- *              the function that created the scatter-gather list.
- *              In other words, if there are no bounce buffers
- *              (the normal case for most drivers), we don't need
- *              the logic to deal with cleaning up afterwards.
- *
- *		We must call scsi_end_request().  This will finish off
- *		the specified number of sectors.  If we are done, the
- *		command block will be released and the queue function
- *		will be goosed.  If we are not done then we have to
+ * Notes:       We will finish off the specified number of sectors.  If we
+ *		are done, the command block will be released and the queue
+ *		function will be goosed.  If we are not done then we have to
  *		figure out what to do next:
  *
  *		a) We can call scsi_requeue_command().  The request
@@ -743,7 +668,7 @@ static int __scsi_error_from_host_byte(struct scsi_cmnd *cmd, int result)
  *		   be used if we made forward progress, or if we want
  *		   to switch from READ(10) to READ(6) for example.
  *
- *		b) We can call scsi_queue_insert().  The request will
+ *		b) We can call __scsi_queue_insert().  The request will
  *		   be put back on the queue and retried using the same
  *		   command as before, possibly after a delay.
  *
@@ -801,6 +726,8 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 			req->next_rq->resid_len = scsi_in(cmd)->resid;
 
 			scsi_release_buffers(cmd);
+			scsi_release_bidi_buffers(cmd);
+
 			blk_end_request_all(req, 0);
 
 			scsi_next_command(cmd);
@@ -840,12 +767,25 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 	}
 
 	/*
-	 * A number of bytes were successfully read.  If there
-	 * are leftovers and there is some kind of error
-	 * (result != 0), retry the rest.
+	 * If we finished all bytes in the request we are done now.
 	 */
-	if (scsi_end_request(cmd, error, good_bytes, result == 0) == NULL)
-		return;
+	if (!blk_end_request(req, error, good_bytes))
+		goto next_command;
+
+	/*
+	 * Kill remainder if no retrys.
+	 */
+	if (error && scsi_noretry_cmd(cmd)) {
+		blk_end_request_all(req, error);
+		goto next_command;
+	}
+
+	/*
+	 * If there had been no error, but we have leftover bytes in the
+	 * requeues just queue the command up again.
+	 */
+	if (result == 0)
+		goto requeue;
 
 	error = __scsi_error_from_host_byte(cmd, result);
 
@@ -973,7 +913,6 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 	switch (action) {
 	case ACTION_FAIL:
 		/* Give up and fail the remainder of the request */
-		scsi_release_buffers(cmd);
 		if (!(req->cmd_flags & REQ_QUIET)) {
 			if (description)
 				scmd_printk(KERN_INFO, cmd, "%s\n",
@@ -983,12 +922,11 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 				scsi_print_sense("", cmd);
 			scsi_print_command(cmd);
 		}
-		if (blk_end_request_err(req, error))
-			scsi_requeue_command(q, cmd);
-		else
-			scsi_next_command(cmd);
-		break;
+		if (!blk_end_request_err(req, error))
+			goto next_command;
+		/*FALLTHRU*/
 	case ACTION_REPREP:
+	requeue:
 		/* Unprep the request and put it back at the head of the queue.
 		 * A new command will be prepared and issued.
 		 */
@@ -1004,6 +942,11 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 		__scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY, 0);
 		break;
 	}
+	return;
+
+next_command:
+	scsi_release_buffers(cmd);
+	scsi_next_command(cmd);
 }
 
 static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb,
@@ -1019,8 +962,6 @@ static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb,
 		return BLKPREP_DEFER;
 	}
 
-	req->buffer = NULL;
-
 	/* 
 	 * Next, walk the list, and fill in the addresses and sizes of
 	 * each segment.
@@ -1130,15 +1071,7 @@ static struct scsi_cmnd *scsi_get_cmd_from_req(struct scsi_device *sdev,
 
 int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req)
 {
-	struct scsi_cmnd *cmd;
-	int ret = scsi_prep_state_check(sdev, req);
-
-	if (ret != BLKPREP_OK)
-		return ret;
-
-	cmd = scsi_get_cmd_from_req(sdev, req);
-	if (unlikely(!cmd))
-		return BLKPREP_DEFER;
+	struct scsi_cmnd *cmd = req->special;
 
 	/*
 	 * BLOCK_PC requests may transfer data, in which case they must
@@ -1158,7 +1091,6 @@ int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req)
 		BUG_ON(blk_rq_bytes(req));
 
 		memset(&cmd->sdb, 0, sizeof(cmd->sdb));
-		req->buffer = NULL;
 	}
 
 	cmd->cmd_len = req->cmd_len;
@@ -1182,15 +1114,11 @@ EXPORT_SYMBOL(scsi_setup_blk_pc_cmnd);
  */
 int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req)
 {
-	struct scsi_cmnd *cmd;
-	int ret = scsi_prep_state_check(sdev, req);
-
-	if (ret != BLKPREP_OK)
-		return ret;
+	struct scsi_cmnd *cmd = req->special;
 
 	if (unlikely(sdev->scsi_dh_data && sdev->scsi_dh_data->scsi_dh
 			 && sdev->scsi_dh_data->scsi_dh->prep_fn)) {
-		ret = sdev->scsi_dh_data->scsi_dh->prep_fn(sdev, req);
+		int ret = sdev->scsi_dh_data->scsi_dh->prep_fn(sdev, req);
 		if (ret != BLKPREP_OK)
 			return ret;
 	}
@@ -1200,16 +1128,13 @@ int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req)
 	 */
 	BUG_ON(!req->nr_phys_segments);
 
-	cmd = scsi_get_cmd_from_req(sdev, req);
-	if (unlikely(!cmd))
-		return BLKPREP_DEFER;
-
 	memset(cmd->cmnd, 0, BLK_MAX_CDB);
 	return scsi_init_io(cmd, GFP_ATOMIC);
 }
 EXPORT_SYMBOL(scsi_setup_fs_cmnd);
 
-int scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
+static int
+scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
 {
 	int ret = BLKPREP_OK;
 
@@ -1261,9 +1186,9 @@ int scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
 	}
 	return ret;
 }
-EXPORT_SYMBOL(scsi_prep_state_check);
 
-int scsi_prep_return(struct request_queue *q, struct request *req, int ret)
+static int
+scsi_prep_return(struct request_queue *q, struct request *req, int ret)
 {
 	struct scsi_device *sdev = q->queuedata;
 
@@ -1294,18 +1219,44 @@ int scsi_prep_return(struct request_queue *q, struct request *req, int ret)
 
 	return ret;
 }
-EXPORT_SYMBOL(scsi_prep_return);
 
-int scsi_prep_fn(struct request_queue *q, struct request *req)
+static int scsi_prep_fn(struct request_queue *q, struct request *req)
 {
 	struct scsi_device *sdev = q->queuedata;
-	int ret = BLKPREP_KILL;
+	struct scsi_cmnd *cmd;
+	int ret;
+
+	ret = scsi_prep_state_check(sdev, req);
+	if (ret != BLKPREP_OK)
+		goto out;
 
-	if (req->cmd_type == REQ_TYPE_BLOCK_PC)
+	cmd = scsi_get_cmd_from_req(sdev, req);
+	if (unlikely(!cmd)) {
+		ret = BLKPREP_DEFER;
+		goto out;
+	}
+
+	if (req->cmd_type == REQ_TYPE_FS)
+		ret = scsi_cmd_to_driver(cmd)->init_command(cmd);
+	else if (req->cmd_type == REQ_TYPE_BLOCK_PC)
 		ret = scsi_setup_blk_pc_cmnd(sdev, req);
+	else
+		ret = BLKPREP_KILL;
+
+out:
 	return scsi_prep_return(q, req, ret);
 }
-EXPORT_SYMBOL(scsi_prep_fn);
+
+static void scsi_unprep_fn(struct request_queue *q, struct request *req)
+{
+	if (req->cmd_type == REQ_TYPE_FS) {
+		struct scsi_cmnd *cmd = req->special;
+		struct scsi_driver *drv = scsi_cmd_to_driver(cmd);
+
+		if (drv->uninit_command)
+			drv->uninit_command(cmd);
+	}
+}
 
 /*
  * scsi_dev_queue_ready: if we can send requests to sdev, return 1 else
@@ -1726,6 +1677,7 @@ struct request_queue *scsi_alloc_queue(struct scsi_device *sdev)
 		return NULL;
 
 	blk_queue_prep_rq(q, scsi_prep_fn);
+	blk_queue_unprep_rq(q, scsi_unprep_fn);
 	blk_queue_softirq_done(q, scsi_softirq_done);
 	blk_queue_rq_timed_out(q, scsi_times_out);
 	blk_queue_lld_busy(q, scsi_lld_busy);