diff options
Diffstat (limited to 'drivers/scsi/scsi_proc.c')
| -rw-r--r-- | drivers/scsi/scsi_proc.c | 110 |
1 files changed, 108 insertions, 2 deletions
diff --git a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c index bb6f051beda..ed395154a5b 100644 --- a/drivers/scsi/scsi_proc.c +++ b/drivers/scsi/scsi_proc.c @@ -45,6 +45,16 @@ static struct proc_dir_entry *proc_scsi; /* Protect sht->present and sht->proc_dir */ static DEFINE_MUTEX(global_host_template_mutex); +/** + * proc_scsi_read - handle read from /proc by calling host's proc_info() command + * @buffer: passed to proc_info + * @start: passed to proc_info + * @offset: passed to proc_info + * @length: passed to proc_info + * @eof: returns whether length read was less than requested + * @data: pointer to a &struct Scsi_Host + */ + static int proc_scsi_read(char *buffer, char **start, off_t offset, int length, int *eof, void *data) { @@ -57,6 +67,13 @@ static int proc_scsi_read(char *buffer, char **start, off_t offset, return n; } +/** + * proc_scsi_write_proc - Handle write to /proc by calling host's proc_info() + * @file: not used + * @buf: source of data to write. + * @count: number of bytes (at most PROC_BLOCK_SIZE) to write. + * @data: pointer to &struct Scsi_Host + */ static int proc_scsi_write_proc(struct file *file, const char __user *buf, unsigned long count, void *data) { @@ -80,6 +97,13 @@ out: return ret; } +/** + * scsi_proc_hostdir_add - Create directory in /proc for a scsi host + * @sht: owner of this directory + * + * Sets sht->proc_dir to the new directory. + */ + void scsi_proc_hostdir_add(struct scsi_host_template *sht) { if (!sht->proc_info) @@ -97,6 +121,10 @@ void scsi_proc_hostdir_add(struct scsi_host_template *sht) mutex_unlock(&global_host_template_mutex); } +/** + * scsi_proc_hostdir_rm - remove directory in /proc for a scsi host + * @sht: owner of directory + */ void scsi_proc_hostdir_rm(struct scsi_host_template *sht) { if (!sht->proc_info) @@ -110,6 +138,11 @@ void scsi_proc_hostdir_rm(struct scsi_host_template *sht) mutex_unlock(&global_host_template_mutex); } + +/** + * scsi_proc_host_add - Add entry for this host to appropriate /proc dir + * @shost: host to add + */ void scsi_proc_host_add(struct Scsi_Host *shost) { struct scsi_host_template *sht = shost->hostt; @@ -133,6 +166,10 @@ void scsi_proc_host_add(struct Scsi_Host *shost) p->owner = sht->module; } +/** + * scsi_proc_host_rm - remove this host's entry from /proc + * @shost: which host + */ void scsi_proc_host_rm(struct Scsi_Host *shost) { char name[10]; @@ -143,7 +180,14 @@ void scsi_proc_host_rm(struct Scsi_Host *shost) sprintf(name,"%d", shost->host_no); remove_proc_entry(name, shost->hostt->proc_dir); } - +/** + * proc_print_scsidevice - return data about this host + * @dev: A scsi device + * @data: &struct seq_file to output to. + * + * Description: prints Host, Channel, Id, Lun, Vendor, Model, Rev, Type, + * and revision. + */ static int proc_print_scsidevice(struct device *dev, void *data) { struct scsi_device *sdev = to_scsi_device(dev); @@ -189,6 +233,21 @@ static int proc_print_scsidevice(struct device *dev, void *data) return 0; } +/** + * scsi_add_single_device - Respond to user request to probe for/add device + * @host: user-supplied decimal integer + * @channel: user-supplied decimal integer + * @id: user-supplied decimal integer + * @lun: user-supplied decimal integer + * + * Description: called by writing "scsi add-single-device" to /proc/scsi/scsi. + * + * does scsi_host_lookup() and either user_scan() if that transport + * type supports it, or else scsi_scan_host_selected() + * + * Note: this seems to be aimed exclusively at SCSI parallel busses. + */ + static int scsi_add_single_device(uint host, uint channel, uint id, uint lun) { struct Scsi_Host *shost; @@ -206,6 +265,16 @@ static int scsi_add_single_device(uint host, uint channel, uint id, uint lun) return error; } +/** + * scsi_remove_single_device - Respond to user request to remove a device + * @host: user-supplied decimal integer + * @channel: user-supplied decimal integer + * @id: user-supplied decimal integer + * @lun: user-supplied decimal integer + * + * Description: called by writing "scsi remove-single-device" to + * /proc/scsi/scsi. Does a scsi_device_lookup() and scsi_remove_device() + */ static int scsi_remove_single_device(uint host, uint channel, uint id, uint lun) { struct scsi_device *sdev; @@ -226,6 +295,25 @@ static int scsi_remove_single_device(uint host, uint channel, uint id, uint lun) return error; } +/** + * proc_scsi_write - handle writes to /proc/scsi/scsi + * @file: not used + * @buf: buffer to write + * @length: length of buf, at most PAGE_SIZE + * @ppos: not used + * + * Description: this provides a legacy mechanism to add or remove devices by + * Host, Channel, ID, and Lun. To use, + * "echo 'scsi add-single-device 0 1 2 3' > /proc/scsi/scsi" or + * "echo 'scsi remove-single-device 0 1 2 3' > /proc/scsi/scsi" with + * "0 1 2 3" replaced by the Host, Channel, Id, and Lun. + * + * Note: this seems to be aimed at parallel SCSI. Most modern busses (USB, + * SATA, Firewire, Fibre Channel, etc) dynamically assign these values to + * provide a unique identifier and nothing more. + */ + + static ssize_t proc_scsi_write(struct file *file, const char __user *buf, size_t length, loff_t *ppos) { @@ -291,6 +379,11 @@ static ssize_t proc_scsi_write(struct file *file, const char __user *buf, return err; } +/** + * proc_scsi_show - show contents of /proc/scsi/scsi (attached devices) + * @s: output goes here + * @p: not used + */ static int proc_scsi_show(struct seq_file *s, void *p) { seq_printf(s, "Attached devices:\n"); @@ -298,10 +391,17 @@ static int proc_scsi_show(struct seq_file *s, void *p) return 0; } +/** + * proc_scsi_open - glue function + * @inode: not used + * @file: passed to single_open() + * + * Associates proc_scsi_show with this file + */ static int proc_scsi_open(struct inode *inode, struct file *file) { /* - * We don't really needs this for the write case but it doesn't + * We don't really need this for the write case but it doesn't * harm either. */ return single_open(file, proc_scsi_show, NULL); @@ -315,6 +415,9 @@ static const struct file_operations proc_scsi_operations = { .release = single_release, }; +/** + * scsi_init_procfs - create scsi and scsi/scsi in procfs + */ int __init scsi_init_procfs(void) { struct proc_dir_entry *pde; @@ -336,6 +439,9 @@ err1: return -ENOMEM; } +/** + * scsi_exit_procfs - Remove scsi/scsi and scsi from procfs + */ void scsi_exit_procfs(void) { remove_proc_entry("scsi/scsi", NULL); |