diff options
Diffstat (limited to 'drivers/scsi/sym53c8xx_2/sym_glue.c')
-rw-r--r-- | drivers/scsi/sym53c8xx_2/sym_glue.c | 120 |
1 files changed, 53 insertions, 67 deletions
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index 5b07c6ec3ec..be58ffd5a43 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -155,10 +155,11 @@ pci_get_base_address(struct pci_dev *pdev, int index, unsigned long *basep) base = tmp; if ((tmp & 0x7) == PCI_BASE_ADDRESS_MEM_TYPE_64) { pci_read_config_dword(pdev, PCI_BAR_OFFSET(index++), &tmp); - if (tmp > 0) + if (tmp > 0) { dev_err(&pdev->dev, "BAR %d is 64-bit, disabling\n", index - 1); - base = 0; + base = 0; + } } if ((base & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) { @@ -389,13 +390,20 @@ static int sym_scatter_no_sglist(struct sym_hcb *np, struct sym_ccb *cp, struct { struct sym_tblmove *data = &cp->phys.data[SYM_CONF_MAX_SG-1]; int segment; + unsigned int len = cmd->request_bufflen; - cp->data_len = cmd->request_bufflen; - - if (cmd->request_bufflen) { + if (len) { dma_addr_t baddr = map_scsi_single_data(np, cmd); if (baddr) { - sym_build_sge(np, data, baddr, cmd->request_bufflen); + if (len & 1) { + struct sym_tcb *tp = &np->target[cp->target]; + if (tp->head.wval & EWS) { + len++; + cp->odd_byte_adjustment++; + } + } + cp->data_len = len; + sym_build_sge(np, data, baddr, len); segment = 1; } else { segment = -2; @@ -418,6 +426,7 @@ static int sym_scatter(struct sym_hcb *np, struct sym_ccb *cp, struct scsi_cmnd segment = sym_scatter_no_sglist(np, cp, cmd); else if ((use_sg = map_scsi_sg_data(np, cmd)) > 0) { struct scatterlist *scatter = (struct scatterlist *)cmd->buffer; + struct sym_tcb *tp = &np->target[cp->target]; struct sym_tblmove *data; if (use_sg > SYM_CONF_MAX_SG) { @@ -431,6 +440,11 @@ static int sym_scatter(struct sym_hcb *np, struct sym_ccb *cp, struct scsi_cmnd dma_addr_t baddr = sg_dma_address(&scatter[segment]); unsigned int len = sg_dma_len(&scatter[segment]); + if ((len & 1) && (tp->head.wval & EWS)) { + len++; + cp->odd_byte_adjustment++; + } + sym_build_sge(np, &data[segment], baddr, len); cp->data_len += len; } @@ -456,10 +470,8 @@ static int sym_queue_command(struct sym_hcb *np, struct scsi_cmnd *cmd) * Minimal checkings, so that we will not * go outside our tables. */ - if (sdev->id == np->myaddr || - sdev->id >= SYM_CONF_MAX_TARGET || - sdev->lun >= SYM_CONF_MAX_LUN) { - sym_xpt_done2(np, cmd, CAM_DEV_NOT_THERE); + if (sdev->id == np->myaddr) { + sym_xpt_done2(np, cmd, DID_NO_CONNECT); return 0; } @@ -469,28 +481,6 @@ static int sym_queue_command(struct sym_hcb *np, struct scsi_cmnd *cmd) tp = &np->target[sdev->id]; /* - * Complete the 1st INQUIRY command with error - * condition if the device is flagged NOSCAN - * at BOOT in the NVRAM. This may speed up - * the boot and maintain coherency with BIOS - * device numbering. Clearing the flag allows - * user to rescan skipped devices later. - * We also return error for devices not flagged - * for SCAN LUNS in the NVRAM since some mono-lun - * devices behave badly when asked for some non - * zero LUN. Btw, this is an absolute hack.:-) - */ - if (cmd->cmnd[0] == 0x12 || cmd->cmnd[0] == 0x0) { - if ((tp->usrflags & SYM_SCAN_BOOT_DISABLED) || - ((tp->usrflags & SYM_SCAN_LUNS_DISABLED) && - sdev->lun != 0)) { - tp->usrflags &= ~SYM_SCAN_BOOT_DISABLED; - sym_xpt_done2(np, cmd, CAM_DEV_NOT_THERE); - return 0; - } - } - - /* * Select tagged/untagged. */ lp = sym_lp(tp, sdev->lun); @@ -511,23 +501,10 @@ static int sym_queue_command(struct sym_hcb *np, struct scsi_cmnd *cmd) */ static inline int sym_setup_cdb(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *cp) { - u32 cmd_ba; - int cmd_len; - - /* - * CDB is 16 bytes max. - */ - if (cmd->cmd_len > sizeof(cp->cdb_buf)) { - sym_set_cam_status(cp->cmd, CAM_REQ_INVALID); - return -1; - } - memcpy(cp->cdb_buf, cmd->cmnd, cmd->cmd_len); - cmd_ba = CCB_BA (cp, cdb_buf[0]); - cmd_len = cmd->cmd_len; - cp->phys.cmd.addr = cpu_to_scr(cmd_ba); - cp->phys.cmd.size = cpu_to_scr(cmd_len); + cp->phys.cmd.addr = CCB_BA(cp, cdb_buf[0]); + cp->phys.cmd.size = cpu_to_scr(cmd->cmd_len); return 0; } @@ -554,10 +531,7 @@ int sym_setup_data_and_start(struct sym_hcb *np, struct scsi_cmnd *cmd, struct s if (dir != DMA_NONE) { cp->segments = sym_scatter(np, cp, cmd); if (cp->segments < 0) { - if (cp->segments == -2) - sym_set_cam_status(cmd, CAM_RESRC_UNAVAIL); - else - sym_set_cam_status(cmd, CAM_REQ_TOO_BIG); + sym_set_cam_status(cmd, DID_ERROR); goto out_abort; } } else { @@ -855,7 +829,7 @@ prepare: ep->to_do = to_do; /* Complete the command with locks held as required by the driver */ if (to_do == SYM_EH_DO_COMPLETE) - sym_xpt_done2(np, cmd, CAM_REQ_ABORTED); + sym_xpt_done2(np, cmd, DID_ABORT); /* Wait for completion with locks released, as required by kernel */ if (to_do == SYM_EH_DO_WAIT) { @@ -921,7 +895,7 @@ static void sym_tune_dev_queuing(struct sym_tcb *tp, int lun, u_short reqtags) lp->s.reqtags = reqtags; if (reqtags != oldtags) { - dev_info(&tp->sdev->sdev_target->dev, + dev_info(&tp->starget->dev, "tagged command queuing %s, command queue depth %d.\n", lp->s.reqtags ? "enabled" : "disabled", lp->started_limit); @@ -981,22 +955,34 @@ static int device_queue_depth(struct sym_hcb *np, int target, int lun) return DEF_DEPTH; } -static int sym53c8xx_slave_alloc(struct scsi_device *device) +static int sym53c8xx_slave_alloc(struct scsi_device *sdev) { - struct sym_hcb *np = sym_get_hcb(device->host); - struct sym_tcb *tp = &np->target[device->id]; - if (!tp->sdev) - tp->sdev = device; + struct sym_hcb *np; + struct sym_tcb *tp; - return 0; -} + if (sdev->id >= SYM_CONF_MAX_TARGET || sdev->lun >= SYM_CONF_MAX_LUN) + return -ENXIO; -static void sym53c8xx_slave_destroy(struct scsi_device *device) -{ - struct sym_hcb *np = sym_get_hcb(device->host); - struct sym_tcb *tp = &np->target[device->id]; - if (tp->sdev == device) - tp->sdev = NULL; + np = sym_get_hcb(sdev->host); + tp = &np->target[sdev->id]; + + /* + * Fail the device init if the device is flagged NOSCAN at BOOT in + * the NVRAM. This may speed up boot and maintain coherency with + * BIOS device numbering. Clearing the flag allows the user to + * rescan skipped devices later. We also return an error for + * devices not flagged for SCAN LUNS in the NVRAM since some single + * lun devices behave badly when asked for a non zero LUN. + */ + + if ((tp->usrflags & SYM_SCAN_BOOT_DISABLED) || + ((tp->usrflags & SYM_SCAN_LUNS_DISABLED) && sdev->lun != 0)) { + tp->usrflags &= ~SYM_SCAN_BOOT_DISABLED; + return -ENXIO; + } + + tp->starget = sdev->sdev_target; + return 0; } /* @@ -1897,6 +1883,7 @@ static int sym_detach(struct sym_hcb *np, struct pci_dev *pdev) */ printk("%s: resetting chip\n", sym_name(np)); OUTB(np, nc_istat, SRST); + INB(np, nc_mbox1); udelay(10); OUTB(np, nc_istat, 0); @@ -1915,7 +1902,6 @@ static struct scsi_host_template sym2_template = { .queuecommand = sym53c8xx_queue_command, .slave_alloc = sym53c8xx_slave_alloc, .slave_configure = sym53c8xx_slave_configure, - .slave_destroy = sym53c8xx_slave_destroy, .eh_abort_handler = sym53c8xx_eh_abort_handler, .eh_device_reset_handler = sym53c8xx_eh_device_reset_handler, .eh_bus_reset_handler = sym53c8xx_eh_bus_reset_handler, |