diff options
Diffstat (limited to 'drivers/scsi/ufs/ufshcd-pci.c')
| -rw-r--r-- | drivers/scsi/ufs/ufshcd-pci.c | 211 |
1 files changed, 211 insertions, 0 deletions
diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c new file mode 100644 index 00000000000..5cb1d75f586 --- /dev/null +++ b/drivers/scsi/ufs/ufshcd-pci.c @@ -0,0 +1,211 @@ +/* + * Universal Flash Storage Host controller PCI glue driver + * + * This code is based on drivers/scsi/ufs/ufshcd-pci.c + * Copyright (C) 2011-2013 Samsung India Software Operations + * + * Authors: + * Santosh Yaraganavi <santosh.sy@samsung.com> + * Vinayak Holikatti <h.vinayak@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * See the COPYING file in the top-level directory or visit + * <http://www.gnu.org/licenses/gpl-2.0.html> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This program is provided "AS IS" and "WITH ALL FAULTS" and + * without warranty of any kind. You are solely responsible for + * determining the appropriateness of using and distributing + * the program and assume all risks associated with your exercise + * of rights with respect to the program, including but not limited + * to infringement of third party rights, the risks and costs of + * program errors, damage to or loss of data, programs or equipment, + * and unavailability or interruption of operations. Under no + * circumstances will the contributor of this Program be liable for + * any damages of any kind arising from your use or distribution of + * this program. + */ + +#include "ufshcd.h" +#include <linux/pci.h> + +#ifdef CONFIG_PM +/** + * ufshcd_pci_suspend - suspend power management function + * @pdev: pointer to PCI device handle + * @state: power state + * + * Returns -ENOSYS + */ +static int ufshcd_pci_suspend(struct pci_dev *pdev, pm_message_t state) +{ + /* + * TODO: + * 1. Call ufshcd_suspend + * 2. Do bus specific power management + */ + + return -ENOSYS; +} + +/** + * ufshcd_pci_resume - resume power management function + * @pdev: pointer to PCI device handle + * + * Returns -ENOSYS + */ +static int ufshcd_pci_resume(struct pci_dev *pdev) +{ + /* + * TODO: + * 1. Call ufshcd_resume. + * 2. Do bus specific wake up + */ + + return -ENOSYS; +} +#endif /* CONFIG_PM */ + +/** + * ufshcd_pci_shutdown - main function to put the controller in reset state + * @pdev: pointer to PCI device handle + */ +static void ufshcd_pci_shutdown(struct pci_dev *pdev) +{ + ufshcd_hba_stop((struct ufs_hba *)pci_get_drvdata(pdev)); +} + +/** + * ufshcd_pci_remove - de-allocate PCI/SCSI host and host memory space + * data structure memory + * @pdev - pointer to PCI handle + */ +static void ufshcd_pci_remove(struct pci_dev *pdev) +{ + struct ufs_hba *hba = pci_get_drvdata(pdev); + + disable_irq(pdev->irq); + free_irq(pdev->irq, hba); + ufshcd_remove(hba); + pci_release_regions(pdev); + pci_set_drvdata(pdev, NULL); + pci_clear_master(pdev); + pci_disable_device(pdev); +} + +/** + * ufshcd_set_dma_mask - Set dma mask based on the controller + * addressing capability + * @pdev: PCI device structure + * + * Returns 0 for success, non-zero for failure + */ +static int ufshcd_set_dma_mask(struct pci_dev *pdev) +{ + int err; + + if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) + && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) + return 0; + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (!err) + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + return err; +} + +/** + * ufshcd_pci_probe - probe routine of the driver + * @pdev: pointer to PCI device handle + * @id: PCI device id + * + * Returns 0 on success, non-zero value on failure + */ +static int +ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct ufs_hba *hba; + void __iomem *mmio_base; + int err; + + err = pci_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "pci_enable_device failed\n"); + goto out_error; + } + + pci_set_master(pdev); + + + err = pci_request_regions(pdev, UFSHCD); + if (err < 0) { + dev_err(&pdev->dev, "request regions failed\n"); + goto out_disable; + } + + mmio_base = pci_ioremap_bar(pdev, 0); + if (!mmio_base) { + dev_err(&pdev->dev, "memory map failed\n"); + err = -ENOMEM; + goto out_release_regions; + } + + err = ufshcd_set_dma_mask(pdev); + if (err) { + dev_err(&pdev->dev, "set dma mask failed\n"); + goto out_iounmap; + } + + err = ufshcd_init(&pdev->dev, &hba, mmio_base, pdev->irq); + if (err) { + dev_err(&pdev->dev, "Initialization failed\n"); + goto out_iounmap; + } + + pci_set_drvdata(pdev, hba); + + return 0; + +out_iounmap: + iounmap(mmio_base); +out_release_regions: + pci_release_regions(pdev); +out_disable: + pci_clear_master(pdev); + pci_disable_device(pdev); +out_error: + return err; +} + +static DEFINE_PCI_DEVICE_TABLE(ufshcd_pci_tbl) = { + { PCI_VENDOR_ID_SAMSUNG, 0xC00C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { } /* terminate list */ +}; + +MODULE_DEVICE_TABLE(pci, ufshcd_pci_tbl); + +static struct pci_driver ufshcd_pci_driver = { + .name = UFSHCD, + .id_table = ufshcd_pci_tbl, + .probe = ufshcd_pci_probe, + .remove = ufshcd_pci_remove, + .shutdown = ufshcd_pci_shutdown, +#ifdef CONFIG_PM + .suspend = ufshcd_pci_suspend, + .resume = ufshcd_pci_resume, +#endif +}; + +module_pci_driver(ufshcd_pci_driver); + +MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>"); +MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>"); +MODULE_DESCRIPTION("UFS host controller PCI glue driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(UFSHCD_DRIVER_VERSION); |