summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/aacraid/aachba.c39
-rw-r--r--drivers/scsi/aacraid/aacraid.h4
-rw-r--r--drivers/scsi/aacraid/commctrl.c2
-rw-r--r--drivers/scsi/aacraid/commsup.c258
-rw-r--r--drivers/scsi/aacraid/linit.c14
5 files changed, 296 insertions, 21 deletions
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 699351c15cc..37c55ddce21 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -175,7 +175,7 @@ MODULE_PARM_DESC(acbsize, "Request a specific adapter control block (FIB) size.
*
* Query config status, and commit the configuration if needed.
*/
-int aac_get_config_status(struct aac_dev *dev)
+int aac_get_config_status(struct aac_dev *dev, int commit_flag)
{
int status = 0;
struct fib * fibptr;
@@ -219,7 +219,7 @@ int aac_get_config_status(struct aac_dev *dev)
aac_fib_complete(fibptr);
/* Send a CT_COMMIT_CONFIG to enable discovery of devices */
if (status >= 0) {
- if (commit == 1) {
+ if ((commit == 1) || commit_flag) {
struct aac_commit_config * dinfo;
aac_fib_init(fibptr);
dinfo = (struct aac_commit_config *) fib_data(fibptr);
@@ -784,8 +784,9 @@ int aac_get_adapter_info(struct aac_dev* dev)
dev->maximum_num_channels = le32_to_cpu(bus_info->BusCount);
}
- tmp = le32_to_cpu(dev->adapter_info.kernelrev);
- printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d] %.*s\n",
+ if (!dev->in_reset) {
+ tmp = le32_to_cpu(dev->adapter_info.kernelrev);
+ printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d] %.*s\n",
dev->name,
dev->id,
tmp>>24,
@@ -794,20 +795,21 @@ int aac_get_adapter_info(struct aac_dev* dev)
le32_to_cpu(dev->adapter_info.kernelbuild),
(int)sizeof(dev->supplement_adapter_info.BuildDate),
dev->supplement_adapter_info.BuildDate);
- tmp = le32_to_cpu(dev->adapter_info.monitorrev);
- printk(KERN_INFO "%s%d: monitor %d.%d-%d[%d]\n",
+ tmp = le32_to_cpu(dev->adapter_info.monitorrev);
+ printk(KERN_INFO "%s%d: monitor %d.%d-%d[%d]\n",
dev->name, dev->id,
tmp>>24,(tmp>>16)&0xff,tmp&0xff,
le32_to_cpu(dev->adapter_info.monitorbuild));
- tmp = le32_to_cpu(dev->adapter_info.biosrev);
- printk(KERN_INFO "%s%d: bios %d.%d-%d[%d]\n",
+ tmp = le32_to_cpu(dev->adapter_info.biosrev);
+ printk(KERN_INFO "%s%d: bios %d.%d-%d[%d]\n",
dev->name, dev->id,
tmp>>24,(tmp>>16)&0xff,tmp&0xff,
le32_to_cpu(dev->adapter_info.biosbuild));
- if (le32_to_cpu(dev->adapter_info.serial[0]) != 0xBAD0)
- printk(KERN_INFO "%s%d: serial %x\n",
- dev->name, dev->id,
- le32_to_cpu(dev->adapter_info.serial[0]));
+ if (le32_to_cpu(dev->adapter_info.serial[0]) != 0xBAD0)
+ printk(KERN_INFO "%s%d: serial %x\n",
+ dev->name, dev->id,
+ le32_to_cpu(dev->adapter_info.serial[0]));
+ }
dev->nondasd_support = 0;
dev->raid_scsi_mode = 0;
@@ -1417,6 +1419,9 @@ static int aac_synchronize(struct scsi_cmnd *scsicmd, int cid)
return SCSI_MLQUEUE_DEVICE_BUSY;
aac = (struct aac_dev *)scsicmd->device->host->hostdata;
+ if (aac->in_reset)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
/*
* Allocate and initialize a Fib
*/
@@ -1504,6 +1509,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
case INQUIRY:
case READ_CAPACITY:
case TEST_UNIT_READY:
+ if (dev->in_reset)
+ return -1;
spin_unlock_irq(host->host_lock);
aac_probe_container(dev, cid);
if ((fsa_dev_ptr[cid].valid & 1) == 0)
@@ -1529,6 +1536,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
}
} else { /* check for physical non-dasd devices */
if(dev->nondasd_support == 1){
+ if (dev->in_reset)
+ return -1;
return aac_send_srb_fib(scsicmd);
} else {
scsicmd->result = DID_NO_CONNECT << 16;
@@ -1584,6 +1593,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
scsicmd->scsi_done(scsicmd);
return 0;
}
+ if (dev->in_reset)
+ return -1;
setinqstr(dev, (void *) (inq_data.inqd_vid), fsa_dev_ptr[cid].type);
inq_data.inqd_pdt = INQD_PDT_DA; /* Direct/random access device */
aac_internal_transfer(scsicmd, &inq_data, 0, sizeof(inq_data));
@@ -1739,6 +1750,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
case READ_10:
case READ_12:
case READ_16:
+ if (dev->in_reset)
+ return -1;
/*
* Hack to keep track of ordinal number of the device that
* corresponds to a container. Needed to convert
@@ -1757,6 +1770,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
case WRITE_10:
case WRITE_12:
case WRITE_16:
+ if (dev->in_reset)
+ return -1;
return aac_write(scsicmd, cid);
case SYNCHRONIZE_CACHE:
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 05f80982efa..8924c183d9c 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -1029,6 +1029,7 @@ struct aac_dev
init->InitStructRevision==cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4)
u8 raw_io_64;
u8 printf_enabled;
+ u8 in_reset;
};
#define aac_adapter_interrupt(dev) \
@@ -1789,7 +1790,7 @@ void aac_consumer_free(struct aac_dev * dev, struct aac_queue * q, u32 qnum);
int aac_fib_complete(struct fib * context);
#define fib_data(fibctx) ((void *)(fibctx)->hw_fib->data)
struct aac_dev *aac_init_adapter(struct aac_dev *dev);
-int aac_get_config_status(struct aac_dev *dev);
+int aac_get_config_status(struct aac_dev *dev, int commit_flag);
int aac_get_containers(struct aac_dev *dev);
int aac_scsi_cmd(struct scsi_cmnd *cmd);
int aac_dev_ioctl(struct aac_dev *dev, int cmd, void __user *arg);
@@ -1800,6 +1801,7 @@ int aac_sa_init(struct aac_dev *dev);
unsigned int aac_response_normal(struct aac_queue * q);
unsigned int aac_command_normal(struct aac_queue * q);
unsigned int aac_intr_normal(struct aac_dev * dev, u32 Index);
+int aac_check_health(struct aac_dev * dev);
int aac_command_thread(void *data);
int aac_close_fib_context(struct aac_dev * dev, struct aac_fib_context *fibctx);
int aac_fib_adapter_complete(struct fib * fibptr, unsigned short size);
diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c
index 14d7aa9b7df..da1d3a9212f 100644
--- a/drivers/scsi/aacraid/commctrl.c
+++ b/drivers/scsi/aacraid/commctrl.c
@@ -298,7 +298,7 @@ return_fib:
spin_unlock_irqrestore(&dev->fib_lock, flags);
/* If someone killed the AIF aacraid thread, restart it */
status = !dev->aif_thread;
- if (status && dev->queues && dev->fsa_dev) {
+ if (status && !dev->in_reset && dev->queues && dev->fsa_dev) {
/* Be paranoid, be very paranoid! */
kthread_stop(dev->thread);
ssleep(1);
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index c67da132113..53add53be0b 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -40,8 +40,10 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/kthread.h>
+#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
#include <asm/semaphore.h>
#include "aacraid.h"
@@ -1054,6 +1056,262 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
}
+static int _aac_reset_adapter(struct aac_dev *aac)
+{
+ int index, quirks;
+ u32 ret;
+ int retval;
+ struct Scsi_Host *host;
+ struct scsi_device *dev;
+ struct scsi_cmnd *command;
+ struct scsi_cmnd *command_list;
+
+ /*
+ * Assumptions:
+ * - host is locked.
+ * - in_reset is asserted, so no new i/o is getting to the
+ * card.
+ * - The card is dead.
+ */
+ host = aac->scsi_host_ptr;
+ scsi_block_requests(host);
+ aac_adapter_disable_int(aac);
+ spin_unlock_irq(host->host_lock);
+ kthread_stop(aac->thread);
+
+ /*
+ * If a positive health, means in a known DEAD PANIC
+ * state and the adapter could be reset to `try again'.
+ */
+ retval = aac_adapter_check_health(aac);
+ if (retval == 0)
+ retval = aac_adapter_sync_cmd(aac, IOP_RESET_ALWAYS,
+ 0, 0, 0, 0, 0, 0, &ret, NULL, NULL, NULL, NULL);
+ if (retval)
+ retval = aac_adapter_sync_cmd(aac, IOP_RESET,
+ 0, 0, 0, 0, 0, 0, &ret, NULL, NULL, NULL, NULL);
+
+ if (retval)
+ goto out;
+ if (ret != 0x00000001) {
+ retval = -ENODEV;
+ goto out;
+ }
+
+ index = aac->cardtype;
+
+ /*
+ * Re-initialize the adapter, first free resources, then carefully
+ * apply the initialization sequence to come back again. Only risk
+ * is a change in Firmware dropping cache, it is assumed the caller
+ * will ensure that i/o is queisced and the card is flushed in that
+ * case.
+ */
+ aac_fib_map_free(aac);
+ aac->hw_fib_va = NULL;
+ aac->hw_fib_pa = 0;
+ pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr, aac->comm_phys);
+ aac->comm_addr = NULL;
+ aac->comm_phys = 0;
+ kfree(aac->queues);
+ aac->queues = NULL;
+ free_irq(aac->pdev->irq, aac);
+ kfree(aac->fsa_dev);
+ aac->fsa_dev = NULL;
+ if (aac_get_driver_ident(index)->quirks & AAC_QUIRK_31BIT) {
+ if (((retval = pci_set_dma_mask(aac->pdev, DMA_32BIT_MASK))) ||
+ ((retval = pci_set_consistent_dma_mask(aac->pdev, DMA_32BIT_MASK))))
+ goto out;
+ } else {
+ if (((retval = pci_set_dma_mask(aac->pdev, 0x7FFFFFFFULL))) ||
+ ((retval = pci_set_consistent_dma_mask(aac->pdev, 0x7FFFFFFFULL))))
+ goto out;
+ }
+ if ((retval = (*(aac_get_driver_ident(index)->init))(aac)))
+ goto out;
+ if (aac_get_driver_ident(index)->quirks & AAC_QUIRK_31BIT)
+ if ((retval = pci_set_dma_mask(aac->pdev, DMA_32BIT_MASK)))
+ goto out;
+ aac->thread = kthread_run(aac_command_thread, aac, aac->name);
+ if (IS_ERR(aac->thread)) {
+ retval = PTR_ERR(aac->thread);
+ goto out;
+ }
+ (void)aac_get_adapter_info(aac);
+ quirks = aac_get_driver_ident(index)->quirks;
+ if ((quirks & AAC_QUIRK_34SG) && (host->sg_tablesize > 34)) {
+ host->sg_tablesize = 34;
+ host->max_sectors = (host->sg_tablesize * 8) + 112;
+ }
+ if ((quirks & AAC_QUIRK_17SG) && (host->sg_tablesize > 17)) {
+ host->sg_tablesize = 17;
+ host->max_sectors = (host->sg_tablesize * 8) + 112;
+ }
+ aac_get_config_status(aac, 1);
+ aac_get_containers(aac);
+ /*
+ * This is where the assumption that the Adapter is quiesced
+ * is important.
+ */
+ command_list = NULL;
+ __shost_for_each_device(dev, host) {
+ unsigned long flags;
+ spin_lock_irqsave(&dev->list_lock, flags);
+ list_for_each_entry(command, &dev->cmd_list, list)
+ if (command->SCp.phase == AAC_OWNER_FIRMWARE) {
+ command->SCp.buffer = (struct scatterlist *)command_list;
+ command_list = command;
+ }
+ spin_unlock_irqrestore(&dev->list_lock, flags);
+ }
+ while ((command = command_list)) {
+ command_list = (struct scsi_cmnd *)command->SCp.buffer;
+ command->SCp.buffer = NULL;
+ command->result = DID_OK << 16
+ | COMMAND_COMPLETE << 8
+ | SAM_STAT_TASK_SET_FULL;
+ command->SCp.phase = AAC_OWNER_ERROR_HANDLER;
+ command->scsi_done(command);
+ }
+ retval = 0;
+
+out:
+ aac->in_reset = 0;
+ scsi_unblock_requests(host);
+ spin_lock_irq(host->host_lock);
+ return retval;
+}
+
+int aac_check_health(struct aac_dev * aac)
+{
+ int BlinkLED;
+ unsigned long time_now, flagv = 0;
+ struct list_head * entry;
+ struct Scsi_Host * host;
+
+ /* Extending the scope of fib_lock slightly to protect aac->in_reset */
+ if (spin_trylock_irqsave(&aac->fib_lock, flagv) == 0)
+ return 0;
+
+ if (aac->in_reset || !(BlinkLED = aac_adapter_check_health(aac))) {
+ spin_unlock_irqrestore(&aac->fib_lock, flagv);
+ return 0; /* OK */
+ }
+
+ aac->in_reset = 1;
+
+ /* Fake up an AIF:
+ * aac_aifcmd.command = AifCmdEventNotify = 1
+ * aac_aifcmd.seqnum = 0xFFFFFFFF
+ * aac_aifcmd.data[0] = AifEnExpEvent = 23
+ * aac_aifcmd.data[1] = AifExeFirmwarePanic = 3
+ * aac.aifcmd.data[2] = AifHighPriority = 3
+ * aac.aifcmd.data[3] = BlinkLED
+ */
+
+ time_now = jiffies/HZ;
+ entry = aac->fib_list.next;
+
+ /*
+ * For each Context that is on the
+ * fibctxList, make a copy of the
+ * fib, and then set the event to wake up the
+ * thread that is waiting for it.
+ */
+ while (entry != &aac->fib_list) {
+ /*
+ * Extract the fibctx
+ */
+ struct aac_fib_context *fibctx = list_entry(entry, struct aac_fib_context, next);
+ struct hw_fib * hw_fib;
+ struct fib * fib;
+ /*
+ * Check if the queue is getting
+ * backlogged
+ */
+ if (fibctx->count > 20) {
+ /*
+ * It's *not* jiffies folks,
+ * but jiffies / HZ, so do not
+ * panic ...
+ */
+ u32 time_last = fibctx->jiffies;
+ /*
+ * Has it been > 2 minutes
+ * since the last read off
+ * the queue?
+ */
+ if ((time_now - time_last) > aif_timeout) {
+ entry = entry->next;
+ aac_close_fib_context(aac, fibctx);
+ continue;
+ }
+ }
+ /*
+ * Warning: no sleep allowed while
+ * holding spinlock
+ */
+ hw_fib = kmalloc(sizeof(struct hw_fib), GFP_ATOMIC);
+ fib = kmalloc(sizeof(struct fib), GFP_ATOMIC);
+ if (fib && hw_fib) {
+ struct aac_aifcmd * aif;
+
+ memset(hw_fib, 0, sizeof(struct hw_fib));
+ memset(fib, 0, sizeof(struct fib));
+ fib->hw_fib = hw_fib;
+ fib->dev = aac;
+ aac_fib_init(fib);
+ fib->type = FSAFS_NTC_FIB_CONTEXT;
+ fib->size = sizeof (struct fib);
+ fib->data = hw_fib->data;
+ aif = (struct aac_aifcmd *)hw_fib->data;
+ aif->command = cpu_to_le32(AifCmdEventNotify);
+ aif->seqnum = cpu_to_le32(0xFFFFFFFF);
+ aif->data[0] = cpu_to_le32(AifEnExpEvent);
+ aif->data[1] = cpu_to_le32(AifExeFirmwarePanic);
+ aif->data[2] = cpu_to_le32(AifHighPriority);
+ aif->data[3] = cpu_to_le32(BlinkLED);
+
+ /*
+ * Put the FIB onto the
+ * fibctx's fibs
+ */
+ list_add_tail(&fib->fiblink, &fibctx->fib_list);
+ fibctx->count++;
+ /*
+ * Set the event to wake up the
+ * thread that will waiting.
+ */
+ up(&fibctx->wait_sem);
+ } else {
+ printk(KERN_WARNING "aifd: didn't allocate NewFib.\n");
+ kfree(fib);
+ kfree(hw_fib);
+ }
+ entry = entry->next;
+ }
+
+ spin_unlock_irqrestore(&aac->fib_lock, flagv);
+
+ if (BlinkLED < 0) {
+ printk(KERN_ERR "%s: Host adapter dead %d\n", aac->name, BlinkLED);
+ goto out;
+ }
+
+ printk(KERN_ERR "%s: Host adapter BLINK LED 0x%x\n", aac->name, BlinkLED);
+
+ host = aac->scsi_host_ptr;
+ spin_lock_irqsave(host->host_lock, flagv);
+ BlinkLED = _aac_reset_adapter(aac);
+ spin_unlock_irqrestore(host->host_lock, flagv);
+ return BlinkLED;
+
+out:
+ aac->in_reset = 0;
+ return BlinkLED;
+}
+
+
/**
* aac_command_thread - command processing thread
* @dev: Adapter to monitor
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 9d8b550a91c..d67058f8081 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -454,17 +454,17 @@ static int aac_eh_reset(struct scsi_cmnd* cmd)
printk(KERN_ERR "%s: Host adapter reset request. SCSI hang ?\n",
AAC_DRIVERNAME);
aac = (struct aac_dev *)host->hostdata;
- if (aac_adapter_check_health(aac)) {
- printk(KERN_ERR "%s: Host adapter appears dead\n",
- AAC_DRIVERNAME);
- return -ENODEV;
- }
+
+ if ((count = aac_check_health(aac)))
+ return count;
/*
* Wait for all commands to complete to this specific
* target (block maximum 60 seconds).
*/
for (count = 60; count; --count) {
- int active = 0;
+ int active = aac->in_reset;
+
+ if (active == 0)
__shost_for_each_device(dev, host) {
spin_lock_irqsave(&dev->list_lock, flags);
list_for_each_entry(command, &dev->cmd_list, list) {
@@ -933,7 +933,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
else
shost->max_channel = 0;
- aac_get_config_status(aac);
+ aac_get_config_status(aac, 0);
aac_get_containers(aac);
list_add(&aac->entry, insert);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-28 01:44:02 +0000