summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/ahci.c10
-rw-r--r--drivers/scsi/ata_piix.c3
-rw-r--r--drivers/scsi/libata-core.c73
-rw-r--r--drivers/scsi/sata_promise.c16
-rw-r--r--drivers/scsi/sata_svw.c1
5 files changed, 93 insertions, 10 deletions
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index d113290b5fc..19bd346951d 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -276,6 +276,16 @@ static const struct pci_device_id ahci_pci_tbl[] = {
board_ahci }, /* ESB2 */
{ PCI_VENDOR_ID_INTEL, 0x27c6, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_ahci }, /* ICH7-M DH */
+ { PCI_VENDOR_ID_INTEL, 0x2821, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ICH8 */
+ { PCI_VENDOR_ID_INTEL, 0x2822, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ICH8 */
+ { PCI_VENDOR_ID_INTEL, 0x2824, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ICH8 */
+ { PCI_VENDOR_ID_INTEL, 0x2829, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ICH8M */
+ { PCI_VENDOR_ID_INTEL, 0x282a, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ICH8M */
{ } /* terminate list */
};
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 557788ec4ee..fc3ca051cee 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -157,6 +157,9 @@ static const struct pci_device_id piix_pci_tbl[] = {
{ 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
{ 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
{ 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+ { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+ { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+ { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
{ } /* terminate list */
};
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 99bae8369ab..46c4cdbaee8 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -611,6 +611,10 @@ int ata_rwcmd_protocol(struct ata_queued_cmd *qc)
if (dev->flags & ATA_DFLAG_PIO) {
tf->protocol = ATA_PROT_PIO;
index = dev->multi_count ? 0 : 8;
+ } else if (lba48 && (qc->ap->flags & ATA_FLAG_PIO_LBA48)) {
+ /* Unable to use DMA due to host limitation */
+ tf->protocol = ATA_PROT_PIO;
+ index = dev->multi_count ? 0 : 4;
} else {
tf->protocol = ATA_PROT_DMA;
index = 16;
@@ -1051,18 +1055,22 @@ static unsigned int ata_pio_modes(const struct ata_device *adev)
{
u16 modes;
- /* Usual case. Word 53 indicates word 88 is valid */
- if (adev->id[ATA_ID_FIELD_VALID] & (1 << 2)) {
+ /* Usual case. Word 53 indicates word 64 is valid */
+ if (adev->id[ATA_ID_FIELD_VALID] & (1 << 1)) {
modes = adev->id[ATA_ID_PIO_MODES] & 0x03;
modes <<= 3;
modes |= 0x7;
return modes;
}
- /* If word 88 isn't valid then Word 51 holds the PIO timing number
- for the maximum. Turn it into a mask and return it */
- modes = (2 << (adev->id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ;
+ /* If word 64 isn't valid then Word 51 high byte holds the PIO timing
+ number for the maximum. Turn it into a mask and return it */
+ modes = (2 << ((adev->id[ATA_ID_OLD_PIO_MODES] >> 8) & 0xFF)) - 1 ;
return modes;
+ /* But wait.. there's more. Design your standards by committee and
+ you too can get a free iordy field to process. However its the
+ speeds not the modes that are supported... Note drivers using the
+ timing API will get this right anyway */
}
struct ata_exec_internal_arg {
@@ -1165,6 +1173,39 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev,
}
/**
+ * ata_pio_need_iordy - check if iordy needed
+ * @adev: ATA device
+ *
+ * Check if the current speed of the device requires IORDY. Used
+ * by various controllers for chip configuration.
+ */
+
+unsigned int ata_pio_need_iordy(const struct ata_device *adev)
+{
+ int pio;
+ int speed = adev->pio_mode - XFER_PIO_0;
+
+ if (speed < 2)
+ return 0;
+ if (speed > 2)
+ return 1;
+
+ /* If we have no drive specific rule, then PIO 2 is non IORDY */
+
+ if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE */
+ pio = adev->id[ATA_ID_EIDE_PIO];
+ /* Is the speed faster than the drive allows non IORDY ? */
+ if (pio) {
+ /* This is cycle times not frequency - watch the logic! */
+ if (pio > 240) /* PIO2 is 240nS per cycle */
+ return 1;
+ return 0;
+ }
+ }
+ return 0;
+}
+
+/**
* ata_dev_identify - obtain IDENTIFY x DEVICE page
* @ap: port on which device we wish to probe resides
* @device: device bus address, starting at zero
@@ -1415,7 +1456,7 @@ void ata_dev_config(struct ata_port *ap, unsigned int i)
ap->udma_mask &= ATA_UDMA5;
ap->host->max_sectors = ATA_MAX_SECTORS;
ap->host->hostt->max_sectors = ATA_MAX_SECTORS;
- ap->device->flags |= ATA_DFLAG_LOCK_SECTORS;
+ ap->device[i].flags |= ATA_DFLAG_LOCK_SECTORS;
}
if (ap->ops->dev_config)
@@ -3056,10 +3097,21 @@ static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf,
static void ata_data_xfer(struct ata_port *ap, unsigned char *buf,
unsigned int buflen, int do_write)
{
- if (ap->flags & ATA_FLAG_MMIO)
- ata_mmio_data_xfer(ap, buf, buflen, do_write);
- else
- ata_pio_data_xfer(ap, buf, buflen, do_write);
+ /* Make the crap hardware pay the costs not the good stuff */
+ if (unlikely(ap->flags & ATA_FLAG_IRQ_MASK)) {
+ unsigned long flags;
+ local_irq_save(flags);
+ if (ap->flags & ATA_FLAG_MMIO)
+ ata_mmio_data_xfer(ap, buf, buflen, do_write);
+ else
+ ata_pio_data_xfer(ap, buf, buflen, do_write);
+ local_irq_restore(flags);
+ } else {
+ if (ap->flags & ATA_FLAG_MMIO)
+ ata_mmio_data_xfer(ap, buf, buflen, do_write);
+ else
+ ata_pio_data_xfer(ap, buf, buflen, do_write);
+ }
}
/**
@@ -5122,6 +5174,7 @@ EXPORT_SYMBOL_GPL(ata_dev_id_string);
EXPORT_SYMBOL_GPL(ata_dev_config);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
+EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
EXPORT_SYMBOL_GPL(ata_timing_compute);
EXPORT_SYMBOL_GPL(ata_timing_merge);
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index 3d1ea09a06a..b0b0a69b356 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -66,6 +66,7 @@ enum {
board_2037x = 0, /* FastTrak S150 TX2plus */
board_20319 = 1, /* FastTrak S150 TX4 */
board_20619 = 2, /* FastTrak TX4000 */
+ board_20771 = 3, /* FastTrak TX2300 */
PDC_HAS_PATA = (1 << 1), /* PDC20375 has PATA */
@@ -190,6 +191,16 @@ static const struct ata_port_info pdc_port_info[] = {
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &pdc_pata_ops,
},
+
+ /* board_20771 */
+ {
+ .sht = &pdc_ata_sht,
+ .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .port_ops = &pdc_sata_ops,
+ },
};
static const struct pci_device_id pdc_ata_pci_tbl[] = {
@@ -226,6 +237,8 @@ static const struct pci_device_id pdc_ata_pci_tbl[] = {
{ PCI_VENDOR_ID_PROMISE, 0x6629, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_20619 },
+ { PCI_VENDOR_ID_PROMISE, 0x3570, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_20771 },
{ } /* terminate list */
};
@@ -706,6 +719,9 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
case board_2037x:
probe_ent->n_ports = 2;
break;
+ case board_20771:
+ probe_ent->n_ports = 2;
+ break;
case board_20619:
probe_ent->n_ports = 4;
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index 668373590aa..d8472563fde 100644
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -470,6 +470,7 @@ static const struct pci_device_id k2_sata_pci_tbl[] = {
{ 0x1166, 0x0241, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
{ 0x1166, 0x0242, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },
{ 0x1166, 0x024a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
+ { 0x1166, 0x024b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
{ }
};
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-24 01:50:59 +0000