diff options
Diffstat (limited to 'drivers/scsi')
74 files changed, 26279 insertions, 1107 deletions
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index 5311317c2e4..a12783ebb42 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -4,7 +4,7 @@ Written By: Adam Radford <linuxraid@amcc.com> Modifications By: Tom Couch <linuxraid@amcc.com> - Copyright (C) 2004-2008 Applied Micro Circuits Corporation. + Copyright (C) 2004-2009 Applied Micro Circuits Corporation. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -75,6 +75,7 @@ Add MSI support and "use_msi" module parameter. Fix bug in twa_get_param() on 4GB+. Use pci_resource_len() for ioremap(). + 2.26.02.012 - Add power management support. */ #include <linux/module.h> @@ -99,7 +100,7 @@ #include "3w-9xxx.h" /* Globals */ -#define TW_DRIVER_VERSION "2.26.02.011" +#define TW_DRIVER_VERSION "2.26.02.012" static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT]; static unsigned int twa_device_extension_count; static int twa_major = -1; @@ -2182,6 +2183,98 @@ static void twa_remove(struct pci_dev *pdev) twa_device_extension_count--; } /* End twa_remove() */ +#ifdef CONFIG_PM +/* This function is called on PCI suspend */ +static int twa_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct Scsi_Host *host = pci_get_drvdata(pdev); + TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata; + + printk(KERN_WARNING "3w-9xxx: Suspending host %d.\n", tw_dev->host->host_no); + + TW_DISABLE_INTERRUPTS(tw_dev); + free_irq(tw_dev->tw_pci_dev->irq, tw_dev); + + if (test_bit(TW_USING_MSI, &tw_dev->flags)) + pci_disable_msi(pdev); + + /* Tell the card we are shutting down */ + if (twa_initconnection(tw_dev, 1, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL)) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x38, "Connection shutdown failed during suspend"); + } else { + printk(KERN_WARNING "3w-9xxx: Suspend complete.\n"); + } + TW_CLEAR_ALL_INTERRUPTS(tw_dev); + + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} /* End twa_suspend() */ + +/* This function is called on PCI resume */ +static int twa_resume(struct pci_dev *pdev) +{ + int retval = 0; + struct Scsi_Host *host = pci_get_drvdata(pdev); + TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata; + + printk(KERN_WARNING "3w-9xxx: Resuming host %d.\n", tw_dev->host->host_no); + pci_set_power_state(pdev, PCI_D0); + pci_enable_wake(pdev, PCI_D0, 0); + pci_restore_state(pdev); + + retval = pci_enable_device(pdev); + if (retval) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x39, "Enable device failed during resume"); + return retval; + } + + pci_set_master(pdev); + pci_try_set_mwi(pdev); + + if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) + || pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) + || pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) { + TW_PRINTK(host, TW_DRIVER, 0x40, "Failed to set dma mask during resume"); + retval = -ENODEV; + goto out_disable_device; + } + + /* Initialize the card */ + if (twa_reset_sequence(tw_dev, 0)) { + retval = -ENODEV; + goto out_disable_device; + } + + /* Now setup the interrupt handler */ + retval = request_irq(pdev->irq, twa_interrupt, IRQF_SHARED, "3w-9xxx", tw_dev); + if (retval) { + TW_PRINTK(tw_dev->host, TW_DRIVER, 0x42, "Error requesting IRQ during resume"); + retval = -ENODEV; + goto out_disable_device; + } + + /* Now enable MSI if enabled */ + if (test_bit(TW_USING_MSI, &tw_dev->flags)) + pci_enable_msi(pdev); + + /* Re-enable interrupts on the card */ + TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev); + + printk(KERN_WARNING "3w-9xxx: Resume complete.\n"); + return 0; + +out_disable_device: + scsi_remove_host(host); + pci_disable_device(pdev); + + return retval; +} /* End twa_resume() */ +#endif + /* PCI Devices supported by this driver */ static struct pci_device_id twa_pci_tbl[] __devinitdata = { { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9000, @@ -2202,6 +2295,10 @@ static struct pci_driver twa_driver = { .id_table = twa_pci_tbl, .probe = twa_probe, .remove = twa_remove, +#ifdef CONFIG_PM + .suspend = twa_suspend, + .resume = twa_resume, +#endif .shutdown = twa_shutdown }; diff --git a/drivers/scsi/3w-9xxx.h b/drivers/scsi/3w-9xxx.h index 1729a8785fe..2893eec78ed 100644 --- a/drivers/scsi/3w-9xxx.h +++ b/drivers/scsi/3w-9xxx.h @@ -4,7 +4,7 @@ Written By: Adam Radford <linuxraid@amcc.com> Modifications By: Tom Couch <linuxraid@amcc.com> - Copyright (C) 2004-2008 Applied Micro Circuits Corporation. + Copyright (C) 2004-2009 Applied Micro Circuits Corporation. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 256c7bec7bd..e2f44e6c0bc 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -224,14 +224,15 @@ config SCSI_LOGGING can enable logging by saying Y to "/proc file system support" and "Sysctl support" below and executing the command - echo "scsi log token [level]" > /proc/scsi/scsi + echo <bitmask> > /proc/sys/dev/scsi/logging_level - at boot time after the /proc file system has been mounted. + where <bitmask> is a four byte value representing the logging type + and logging level for each type of logging selected. - There are a number of things that can be used for 'token' (you can - find them in the source: <file:drivers/scsi/scsi.c>), and this - allows you to select the types of information you want, and the - level allows you to select the level of verbosity. + There are a number of logging types and you can find them in the + source at <file:drivers/scsi/scsi_logging.h>. The logging levels + are also described in that file and they determine the verbosity of + the logging for each logging type. If you say N here, it may be harder to track down some types of SCSI problems. If you say Y here your kernel will be somewhat larger, but @@ -570,6 +571,7 @@ config SCSI_ARCMSR_AER To enable this function, choose Y here. source "drivers/scsi/megaraid/Kconfig.megaraid" +source "drivers/scsi/mpt2sas/Kconfig" config SCSI_HPTIOP tristate "HighPoint RocketRAID 3xxx/4xxx Controller support" @@ -608,6 +610,7 @@ config SCSI_FLASHPOINT config LIBFC tristate "LibFC module" select SCSI_FC_ATTRS + select CRC32 ---help--- Fibre Channel library module @@ -1535,6 +1538,7 @@ config SCSI_NSP32 config SCSI_DEBUG tristate "SCSI debugging host simulator" depends on SCSI + select CRC_T10DIF help This is a host adapter simulator that can simulate multiple hosts each with multiple dummy SCSI devices (disks). It defaults to one @@ -1803,4 +1807,6 @@ source "drivers/scsi/pcmcia/Kconfig" source "drivers/scsi/device_handler/Kconfig" +source "drivers/scsi/osd/Kconfig" + endmenu diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 7461eb09a03..cf792963466 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -99,6 +99,7 @@ obj-$(CONFIG_SCSI_DC390T) += tmscsim.o obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/ obj-$(CONFIG_MEGARAID_SAS) += megaraid/ +obj-$(CONFIG_SCSI_MPT2SAS) += mpt2sas/ obj-$(CONFIG_SCSI_ACARD) += atp870u.o obj-$(CONFIG_SCSI_SUNESP) += esp_scsi.o sun_esp.o obj-$(CONFIG_SCSI_GDTH) += gdth.o @@ -137,6 +138,8 @@ obj-$(CONFIG_CHR_DEV_SG) += sg.o obj-$(CONFIG_CHR_DEV_SCH) += ch.o obj-$(CONFIG_SCSI_ENCLOSURE) += ses.o +obj-$(CONFIG_SCSI_OSD_INITIATOR) += osd/ + # This goes last, so that "real" scsi devices probe earlier obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c index af9725409f4..7b1633a8c15 100644 --- a/drivers/scsi/ch.c +++ b/drivers/scsi/ch.c @@ -41,6 +41,7 @@ MODULE_DESCRIPTION("device driver for scsi media changer devices"); MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org>"); MODULE_LICENSE("GPL"); MODULE_ALIAS_CHARDEV_MAJOR(SCSI_CHANGER_MAJOR); +MODULE_ALIAS_SCSI_DEVICE(TYPE_MEDIUM_CHANGER); static int init = 1; module_param(init, int, 0444); diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c index 4003deefb7d..e79e18101f8 100644 --- a/drivers/scsi/constants.c +++ b/drivers/scsi/constants.c @@ -1373,21 +1373,14 @@ static const char * const driverbyte_table[]={ "DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD", "DRIVER_SENSE"}; #define NUM_DRIVERBYTE_STRS ARRAY_SIZE(driverbyte_table) -static const char * const driversuggest_table[]={"SUGGEST_OK", -"SUGGEST_RETRY", "SUGGEST_ABORT", "SUGGEST_REMAP", "SUGGEST_DIE", -"SUGGEST_5", "SUGGEST_6", "SUGGEST_7", "SUGGEST_SENSE"}; -#define NUM_SUGGEST_STRS ARRAY_SIZE(driversuggest_table) - void scsi_show_result(int result) { int hb = host_byte(result); - int db = (driver_byte(result) & DRIVER_MASK); - int su = ((driver_byte(result) & SUGGEST_MASK) >> 4); + int db = driver_byte(result); - printk("Result: hostbyte=%s driverbyte=%s,%s\n", + printk("Result: hostbyte=%s driverbyte=%s\n", (hb < NUM_HOSTBYTE_STRS ? hostbyte_table[hb] : "invalid"), - (db < NUM_DRIVERBYTE_STRS ? driverbyte_table[db] : "invalid"), - (su < NUM_SUGGEST_STRS ? driversuggest_table[su] : "invalid")); + (db < NUM_DRIVERBYTE_STRS ? driverbyte_table[db] : "invalid")); } #else diff --git a/drivers/scsi/cxgb3i/cxgb3i_ddp.c b/drivers/scsi/cxgb3i/cxgb3i_ddp.c index a83d36e4926..4eb6f5593b3 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_ddp.c +++ b/drivers/scsi/cxgb3i/cxgb3i_ddp.c @@ -196,7 +196,7 @@ static inline int ddp_alloc_gl_skb(struct cxgb3i_ddp_info *ddp, int idx, } /** - * cxgb3i_ddp_find_page_index - return ddp page index for a given page size. + * cxgb3i_ddp_find_page_index - return ddp page index for a given page size * @pgsz: page size * return the ddp page index, if no match is found return DDP_PGIDX_MAX. */ @@ -355,8 +355,7 @@ EXPORT_SYMBOL_GPL(cxgb3i_ddp_release_gl); * @tdev: t3cdev adapter * @tid: connection id * @tformat: tag format - * @tagp: the s/w tag, if ddp setup is successful, it will be updated with - * ddp/hw tag + * @tagp: contains s/w tag initially, will be updated with ddp/hw tag * @gl: the page momory list * @gfp: allocation mode * diff --git a/drivers/scsi/cxgb3i/cxgb3i_ddp.h b/drivers/scsi/cxgb3i/cxgb3i_ddp.h index 3faae7831c8..75a63a81e87 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_ddp.h +++ b/drivers/scsi/cxgb3i/cxgb3i_ddp.h @@ -185,12 +185,11 @@ static inline int cxgb3i_is_ddp_tag(struct cxgb3i_tag_format *tformat, u32 tag) } /** - * cxgb3i_sw_tag_usable - check if a given s/w tag has enough bits left for - * the reserved/hw bits + * cxgb3i_sw_tag_usable - check if s/w tag has enough bits left for hw bits * @tformat: tag format information * @sw_tag: s/w tag to be checked * - * return true if the tag is a ddp tag, false otherwise. + * return true if the tag can be used for hw ddp tag, false otherwise. */ static inline int cxgb3i_sw_tag_usable(struct cxgb3i_tag_format *tformat, u32 sw_tag) @@ -222,8 +221,7 @@ static inline u32 cxgb3i_set_non_ddp_tag(struct cxgb3i_tag_format *tformat, } /** - * cxgb3i_ddp_tag_base - shift the s/w tag bits so that reserved bits are not - * used. + * cxgb3i_ddp_tag_base - shift s/w tag bits so that reserved bits are not used * @tformat: tag format information * @sw_tag: s/w tag to be checked */ diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c index fa2a44f37b3..e185dedc4c1 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c +++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c @@ -101,8 +101,7 @@ free_snic: } /** - * cxgb3i_adapter_remove - release all the resources held and cleanup any - * h/w settings + * cxgb3i_adapter_remove - release the resources held and cleanup h/w settings * @t3dev: t3cdev adapter */ void cxgb3i_adapter_remove(struct t3cdev *t3dev) @@ -135,8 +134,7 @@ void cxgb3i_adapter_remove(struct t3cdev *t3dev) } /** - * cxgb3i_hba_find_by_netdev - find the cxgb3i_hba structure with a given - * net_device + * cxgb3i_hba_find_by_netdev - find the cxgb3i_hba structure via net_device * @t3dev: t3cdev adapter */ struct cxgb3i_hba *cxgb3i_hba_find_by_netdev(struct net_device *ndev) @@ -170,8 +168,7 @@ struct cxgb3i_hba *cxgb3i_hba_host_add(struct cxgb3i_adapter *snic, int err; shost = iscsi_host_alloc(&cxgb3i_host_template, - sizeof(struct cxgb3i_hba), - CXGB3I_SCSI_QDEPTH_DFLT); + sizeof(struct cxgb3i_hba), 1); if (!shost) { cxgb3i_log_info("iscsi_host_alloc failed.\n"); return NULL; @@ -335,13 +332,12 @@ static void cxgb3i_ep_disconnect(struct iscsi_endpoint *ep) * @cmds_max: max # of commands * @qdepth: scsi queue depth * @initial_cmdsn: initial iscsi CMDSN for this session - * @host_no: pointer to return host no * * Creates a new iSCSI session */ static struct iscsi_cls_session * cxgb3i_session_create(struct iscsi_endpoint *ep, u16 cmds_max, u16 qdepth, - u32 initial_cmdsn, u32 *host_no) + u32 initial_cmdsn) { struct cxgb3i_endpoint *cep; struct cxgb3i_hba *hba; @@ -360,8 +356,6 @@ cxgb3i_session_create(struct iscsi_endpoint *ep, u16 cmds_max, u16 qdepth, cxgb3i_api_debug("ep 0x%p, cep 0x%p, hba 0x%p.\n", ep, cep, hba); BUG_ON(hba != iscsi_host_priv(shost)); - *host_no = shost->host_no; - cls_session = iscsi_session_setup(&cxgb3i_iscsi_transport, shost, cmds_max, sizeof(struct iscsi_tcp_task) + @@ -394,9 +388,9 @@ static void cxgb3i_session_destroy(struct iscsi_cls_session *cls_session) } /** - * cxgb3i_conn_max_xmit_dlength -- check the max. xmit pdu segment size, - * reduce it to be within the hardware limit if needed + * cxgb3i_conn_max_xmit_dlength -- calc the max. xmit pdu segment size * @conn: iscsi connection + * check the max. xmit pdu payload, reduce it if needed */ static inline int cxgb3i_conn_max_xmit_dlength(struct iscsi_conn *conn) @@ -417,8 +411,7 @@ static inline int cxgb3i_conn_max_xmit_dlength(struct iscsi_conn *conn) } /** - * cxgb3i_conn_max_recv_dlength -- check the max. recv pdu segment size against - * the hardware limit + * cxgb3i_conn_max_recv_dlength -- check the max. recv pdu segment size * @conn: iscsi connection * return 0 if the value is valid, < 0 otherwise. */ @@ -759,9 +752,9 @@ static void cxgb3i_parse_itt(struct iscsi_conn *conn, itt_t itt, /** * cxgb3i_reserve_itt - generate tag for a give task - * Try to set up ddp for a scsi read task. * @task: iscsi task * @hdr_itt: tag, filled in by this function + * Set up ddp for scsi read tasks if possible. */ int cxgb3i_reserve_itt(struct iscsi_task *task, itt_t *hdr_itt) { @@ -809,9 +802,9 @@ int cxgb3i_reserve_itt(struct iscsi_task *task, itt_t *hdr_itt) /** * cxgb3i_release_itt - release the tag for a given task - * if the tag is a ddp tag, release the ddp setup * @task: iscsi task * @hdr_itt: tag + * If the tag is a ddp tag, release the ddp setup */ void cxgb3i_release_itt(struct iscsi_task *task, itt_t hdr_itt) { @@ -843,7 +836,7 @@ static struct scsi_host_template cxgb3i_host_template = { .can_queue = CXGB3I_SCSI_QDEPTH_DFLT - 1, .sg_tablesize = SG_ALL, .max_sectors = 0xFFFF, - .cmd_per_lun = ISCSI_DEF_CMD_PER_LUN, + .cmd_per_lun = CXGB3I_SCSI_QDEPTH_DFLT, .eh_abort_handler = iscsi_eh_abort, .eh_device_reset_handler = iscsi_eh_device_reset, .eh_target_reset_handler = iscsi_eh_target_reset, diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c index de3b3b614cc..c2e434e54e2 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_offload.c +++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c @@ -1417,8 +1417,7 @@ static void c3cn_active_close(struct s3_conn *c3cn) } /** - * cxgb3i_c3cn_release - close and release an iscsi tcp connection and any - * resource held + * cxgb3i_c3cn_release - close and release an iscsi tcp connection * @c3cn: the iscsi tcp connection */ void cxgb3i_c3cn_release(struct s3_conn *c3cn) diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.h b/drivers/scsi/cxgb3i/cxgb3i_offload.h index 6344b9eb258..275f23f16eb 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_offload.h +++ b/drivers/scsi/cxgb3i/cxgb3i_offload.h @@ -139,6 +139,7 @@ enum c3cn_flags { /** * cxgb3i_sdev_data - Per adapter data. + * * Linked off of each Ethernet device port on the adapter. * Also available via the t3cdev structure since we have pointers to our port * net_device's there ... diff --git a/drivers/scsi/cxgb3i/cxgb3i_pdu.c b/drivers/scsi/cxgb3i/cxgb3i_pdu.c index 17115c230d6..7eebc9a7cb3 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_pdu.c +++ b/drivers/scsi/cxgb3i/cxgb3i_pdu.c @@ -479,7 +479,7 @@ void cxgb3i_conn_tx_open(struct s3_conn *c3cn) cxgb3i_tx_debug("cn 0x%p.\n", c3cn); if (conn) { cxgb3i_tx_debug("cn 0x%p, cid %d.\n", c3cn, conn->id); - scsi_queue_work(conn->session->host, &conn->xmitwork); + iscsi_conn_queue_work(conn); } } diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index e356b43753f..dba154c8ff6 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -247,8 +247,8 @@ static unsigned submit_stpg(struct scsi_device *sdev, struct alua_dh_data *h) /* Prepare the data buffer */ memset(h->buff, 0, stpg_len); h->buff[4] = TPGS_STATE_OPTIMIZED & 0x0f; - h->buff[6] = (h->group_id >> 8) & 0x0f; - h->buff[7] = h->group_id & 0x0f; + h->buff[6] = (h->group_id >> 8) & 0xff; + h->buff[7] = h->group_id & 0xff; rq = get_alua_req(sdev, h->buff, stpg_len, WRITE); if (!rq) @@ -461,6 +461,15 @@ static int alua_check_sense(struct scsi_device *sdev, */ return ADD_TO_MLQUEUE; } + if (sense_hdr->asc == 0x3f && sense_hdr->ascq == 0x0e) { + /* + * REPORTED_LUNS_DATA_HAS_CHANGED is reported + * when switching controllers on targets like + * Intel Multi-Flex. We can just retry. + */ + return ADD_TO_MLQUEUE; + } + break; } @@ -691,6 +700,7 @@ static const struct scsi_dh_devlist alua_dev_list[] = { {"IBM", "2107900" }, {"IBM", "2145" }, {"Pillar", "Axiom" }, + {"Intel", "Multi-Flex"}, {NULL, NULL} }; diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c index 53664765570..43b8c51e98d 100644 --- a/drivers/scsi/device_handler/scsi_dh_rdac.c +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -449,28 +449,40 @@ static int mode_select_handle_sense(struct scsi_device *sdev, unsigned char *sensebuf) { struct scsi_sense_hdr sense_hdr; - int sense, err = SCSI_DH_IO, ret; + int err = SCSI_DH_IO, ret; ret = scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, &sense_hdr); if (!ret) goto done; err = SCSI_DH_OK; - sense = (sense_hdr.sense_key << 16) | (sense_hdr.asc << 8) | - sense_hdr.ascq; - /* If it is retryable failure, submit the c9 inquiry again */ - if (sense == 0x59136 || sense == 0x68b02 || sense == 0xb8b02 || - sense == 0x62900) { - /* 0x59136 - Command lock contention - * 0x[6b]8b02 - Quiesense in progress or achieved - * 0x62900 - Power On, Reset, or Bus Device Reset - */ + + switch (sense_hdr.sense_key) { + case NO_SENSE: + case ABORTED_COMMAND: + case UNIT_ATTENTION: err = SCSI_DH_RETRY; + break; + case NOT_READY: + if (sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x01) + /* LUN Not Ready and is in the Process of Becoming + * Ready + */ + err = SCSI_DH_RETRY; + break; + case ILLEGAL_REQUEST: + if (sense_hdr.asc == 0x91 && sense_hdr.ascq == 0x36) + /* + * Command Lock contention + */ + err = SCSI_DH_RETRY; + break; + default: + sdev_printk(KERN_INFO, sdev, + "MODE_SELECT failed with sense %02x/%02x/%02x.\n", + sense_hdr.sense_key, sense_hdr.asc, sense_hdr.ascq); } - if (sense) - sdev_printk(KERN_INFO, sdev, - "MODE_SELECT failed with sense 0x%x.\n", sense); done: return err; } @@ -562,6 +574,12 @@ static int rdac_check_sense(struct scsi_device *sdev, * Just retry and wait. */ return ADD_TO_MLQUEUE; + if (sense_hdr->asc == 0xA1 && sense_hdr->ascq == 0x02) + /* LUN Not Ready - Quiescense in progress + * or has been achieved + * Just retry. + */ + return ADD_TO_MLQUEUE; break; case ILLEGAL_REQUEST: if (sense_hdr->asc == 0x94 && sense_hdr->ascq == 0x01) { @@ -579,6 +597,11 @@ static int rdac_check_sense(struct scsi_device *sdev, * Power On, Reset, or Bus Device Reset, just retry. */ return ADD_TO_MLQUEUE; + if (sense_hdr->asc == 0x8b && sense_hdr->ascq == 0x02) + /* + * Quiescence in progress , just retry. + */ + return ADD_TO_MLQUEUE; break; } /* success just means we do not care what scsi-ml does */ diff --git a/drivers/scsi/fcoe/fcoe_sw.c b/drivers/scsi/fcoe/fcoe_sw.c index da210eba194..2bbbe3c0cc7 100644 --- a/drivers/scsi/fcoe/fcoe_sw.c +++ b/drivers/scsi/fcoe/fcoe_sw.c @@ -133,6 +133,13 @@ static int fcoe_sw_lport_config(struct fc_lport *lp) /* lport fc_lport related configuration */ fc_lport_config(lp); + /* offload related configuration */ + lp->crc_offload = 0; + lp->seq_offload = 0; + lp->lro_enabled = 0; + lp->lro_xid = 0; + lp->lso_max = 0; + return 0; } @@ -186,7 +193,27 @@ static int fcoe_sw_netdev_config(struct fc_lport *lp, struct net_device *netdev) if (fc->real_dev->features & NETIF_F_SG) lp->sg_supp = 1; - +#ifdef NETIF_F_FCOE_CRC + if (netdev->features & NETIF_F_FCOE_CRC) { + lp->crc_offload = 1; + printk(KERN_DEBUG "fcoe:%s supports FCCRC offload\n", + netdev->name); + } +#endif +#ifdef NETIF_F_FSO + if (netdev->features & NETIF_F_FSO) { + lp->seq_offload = 1; + lp->lso_max = netdev->gso_max_size; + printk(KERN_DEBUG "fcoe:%s supports LSO for max len 0x%x\n", + netdev->name, lp->lso_max); + } +#endif + if (netdev->fcoe_ddp_xid) { + lp->lro_enabled = 1; + lp->lro_xid = netdev->fcoe_ddp_xid; + printk(KERN_DEBUG "fcoe:%s supports LRO for max xid 0x%x\n", + netdev->name, lp->lro_xid); + } skb_queue_head_init(&fc->fcoe_pending_queue); fc->fcoe_pending_queue_active = 0; @@ -346,8 +373,46 @@ static int fcoe_sw_destroy(struct net_device *netdev) return 0; } +/* + * fcoe_sw_ddp_setup - calls LLD's ddp_setup through net_device + * @lp: the corresponding fc_lport + * @xid: the exchange id for this ddp transfer + * @sgl: the scatterlist describing this transfer + * @sgc: number of sg items + * + * Returns : 0 no ddp + */ +static int fcoe_sw_ddp_setup(struct fc_lport *lp, u16 xid, + struct scatterlist *sgl, unsigned int sgc) +{ + struct net_device *n = fcoe_netdev(lp); + + if (n->netdev_ops && n->netdev_ops->ndo_fcoe_ddp_setup) + return n->netdev_ops->ndo_fcoe_ddp_setup(n, xid, sgl, sgc); + + return 0; +} + +/* + * fcoe_sw_ddp_done - calls LLD's ddp_done through net_device + * @lp: the corresponding fc_lport + * @xid: the exchange id for this ddp transfer + * + * Returns : the length of data that have been completed by ddp + */ +static int fcoe_sw_ddp_done(struct fc_lport *lp, u16 xid) +{ + struct net_device *n = fcoe_netdev(lp); + + if (n->netdev_ops && n->netdev_ops->ndo_fcoe_ddp_done) + return n->netdev_ops->ndo_fcoe_ddp_done(n, xid); + return 0; +} + static struct libfc_function_template fcoe_sw_libfc_fcn_templ = { .frame_send = fcoe_xmit, + .ddp_setup = fcoe_sw_ddp_setup, + .ddp_done = fcoe_sw_ddp_done, }; /** diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 5548bf3bb58..0d6f5beb7f9 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -423,7 +423,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) /* crc offload */ if (likely(lp->crc_offload)) { - skb->ip_summed = CHECKSUM_COMPLETE; + skb->ip_summed = CHECKSUM_PARTIAL; skb->csum_start = skb_headroom(skb); skb->csum_offset = skb->len; crc = 0; @@ -460,7 +460,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) skb_reset_mac_header(skb); skb_reset_network_header(skb); skb->mac_len = elen; - skb->protocol = htons(ETH_P_802_3); + skb->protocol = htons(ETH_P_FCOE); skb->dev = fc->real_dev; /* fill up mac and fcoe headers */ @@ -483,6 +483,16 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) FC_FCOE_ENCAPS_VER(hp, FC_FCOE_VER); hp->fcoe_sof = sof; +#ifdef NETIF_F_FSO + /* fcoe lso, mss is in max_payload which is non-zero for FCP data */ + if (lp->seq_offload && fr_max_payload(fp)) { + skb_shinfo(skb)->gso_type = SKB_GSO_FCOE; + skb_shinfo(skb)->gso_size = fr_max_payload(fp); + } else { + skb_shinfo(skb)->gso_type = 0; + skb_shinfo(skb)->gso_size = 0; + } +#endif /* update tx stats: regardless if LLD fails */ stats = lp->dev_stats[smp_processor_id()]; if (stats) { @@ -623,7 +633,7 @@ int fcoe_percpu_receive_thread(void *arg) * it's solicited data, in which case, the FCP layer would * check it during the copy. */ - if (lp->crc_offload) + if (lp->crc_offload && skb->ip_summed == CHECKSUM_UNNECESSARY) fr_flags(fp) &= ~FCPHF_CRC_UNCHECKED; else fr_flags(fp) |= FCPHF_CRC_UNCHECKED; diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index aa670a1d151..89d41a424b3 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -176,7 +176,6 @@ void scsi_remove_host(struct Scsi_Host *shost) transport_unregister_device(&shost->shost_gendev); device_unregister(&shost->shost_dev); device_del(&shost->shost_gendev); - scsi_proc_hostdir_rm(shost->hostt); } EXPORT_SYMBOL(scsi_remove_host); @@ -270,6 +269,8 @@ static void scsi_host_dev_release(struct device *dev) struct Scsi_Host *shost = dev_to_shost(dev); struct device *parent = dev->parent; + scsi_proc_hostdir_rm(shost->hostt); + if (shost->ehandler) kthread_stop(shost->ehandler); if (shost->work_q) diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c index 34be88d7afa..af1f0af0c5a 100644 --- a/drivers/scsi/hptiop.c +++ b/drivers/scsi/hptiop.c @@ -580,8 +580,7 @@ static void hptiop_finish_scsi_req(struct hptiop_hba *hba, u32 tag, break; default: - scp->result = ((DRIVER_INVALID|SUGGEST_ABORT)<<24) | - (DID_ABORT<<16); + scp->result = DRIVER_INVALID << 24 | DID_ABORT << 16; break; } diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index ed1e728763a..93d1fbe4ee5 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -2767,6 +2767,40 @@ static void ibmvfc_retry_tgt_init(struct ibmvfc_target *tgt, ibmvfc_init_tgt(tgt, job_step); } +/* Defined in FC-LS */ +static const struct { + int code; + int retry; + int logged_in; +} prli_rsp [] = { + { 0, 1, 0 }, + { 1, 0, 1 }, + { 2, 1, 0 }, + { 3, 1, 0 }, + { 4, 0, 0 }, + { 5, 0, 0 }, + { 6, 0, 1 }, + { 7, 0, 0 }, + { 8, 1, 0 }, +}; + +/** + * ibmvfc_get_prli_rsp - Find PRLI response index + * @flags: PRLI response flags + * + **/ +static int ibmvfc_get_prli_rsp(u16 flags) +{ + int i; + int code = (flags & 0x0f00) >> 8; + + for (i = 0; i < ARRAY_SIZE(prli_rsp); i++) + if (prli_rsp[i].code == code) + return i; + + return 0; +} + /** * ibmvfc_tgt_prli_done - Completion handler for Process Login * @evt: ibmvfc event struct @@ -2777,15 +2811,36 @@ static void ibmvfc_tgt_prli_done(struct ibmvfc_event *evt) struct ibmvfc_target *tgt = evt->tgt; struct ibmvfc_host *vhost = evt->vhost; struct ibmvfc_process_login *rsp = &evt->xfer_iu->prli; + struct ibmvfc_prli_svc_parms *parms = &rsp->parms; u32 status = rsp->common.status; + int index; vhost->discovery_threads--; ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE); switch (status) { case IBMVFC_MAD_SUCCESS: - tgt_dbg(tgt, "Process Login succeeded\n"); - tgt->need_login = 0; - ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_ADD_RPORT); + tgt_dbg(tgt, "Process Login succeeded: %X %02X %04X\n", + parms->type, parms->flags, parms->service_parms); + + if (parms->type == IBMVFC_SCSI_FCP_TYPE) { + index = ibmvfc_get_prli_rsp(parms->flags); + if (prli_rsp[index].logged_in) { + if (parms->flags & IBMVFC_PRLI_EST_IMG_PAIR) { + tgt->need_login = 0; + tgt->ids.roles = 0; + if (parms->service_parms & IBMVFC_PRLI_TARGET_FUNC) + tgt->ids.roles |= FC_PORT_ROLE_FCP_TARGET; + if (parms->service_parms & IBMVFC_PRLI_INITIATOR_FUNC) + tgt->ids.roles |= FC_PORT_ROLE_FCP_INITIATOR; + ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_ADD_RPORT); + } else + ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT); + } else if (prli_rsp[index].retry) + ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_prli); + else + ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT); + } else + ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT); break; case IBMVFC_MAD_DRIVER_FAILED: break; @@ -2874,7 +2929,6 @@ static void ibmvfc_tgt_plogi_done(struct ibmvfc_event *evt) tgt->ids.node_name = wwn_to_u64(rsp->service_parms.node_name); tgt->ids.port_name = wwn_to_u64(rsp->service_parms.port_name); tgt->ids.port_id = tgt->scsi_id; - tgt->ids.roles = FC_PORT_ROLE_FCP_TARGET; memcpy(&tgt->service_parms, &rsp->service_parms, sizeof(tgt->service_parms)); memcpy(&tgt->service_parms_change, &rsp->service_parms_change, diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 07829009a8b..def473f0a98 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -152,13 +152,13 @@ module_param_named(log_level, ipr_log_level, uint, 0); MODULE_PARM_DESC(log_level, "Set to 0 - 4 for increasing verbosity of device driver"); module_param_named(testmode, ipr_testmode, int, 0); MODULE_PARM_DESC(testmode, "DANGEROUS!!! Allows unsupported configurations"); -module_param_named(fastfail, ipr_fastfail, int, 0); +module_param_named(fastfail, ipr_fastfail, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(fastfail, "Reduce timeouts and retries"); module_param_named(transop_timeout, ipr_transop_timeout, int, 0); MODULE_PARM_DESC(transop_timeout, "Time in seconds to wait for adapter to come operational (default: 300)"); module_param_named(enable_cache, ipr_enable_cache, int, 0); MODULE_PARM_DESC(enable_cache, "Enable adapter's non-volatile write cache (default: 1)"); -module_param_named(debug, ipr_debug, int, 0); +module_param_named(debug, ipr_debug, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Enable device driver debugging logging. Set to 1 to enable. (default: 0)"); module_param_named(dual_ioa_raid, ipr_dual_ioa_raid, int, 0); MODULE_PARM_DESC(dual_ioa_raid, "Enable dual adapter RAID support. Set to 1 to enable. (default: 1)"); @@ -354,6 +354,8 @@ struct ipr_error_table_t ipr_error_table[] = { "9076: Configuration error, missing remote IOA"}, {0x06679100, 0, IPR_DEFAULT_LOG_LEVEL, "4050: Enclosure does not support a required multipath function"}, + {0x06690000, 0, IPR_DEFAULT_LOG_LEVEL, + "4070: Logically bad block written on device"}, {0x06690200, 0, IPR_DEFAULT_LOG_LEVEL, "9041: Array protection temporarily suspended"}, {0x06698200, 0, IPR_DEFAULT_LOG_LEVEL, @@ -7147,6 +7149,7 @@ static void ipr_free_all_resources(struct ipr_ioa_cfg *ioa_cfg) ENTER; free_irq(pdev->irq, ioa_cfg); + pci_disable_msi(pdev); iounmap(ioa_cfg->hdw_dma_regs); pci_release_regions(pdev); ipr_free_mem(ioa_cfg); @@ -7432,6 +7435,11 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev, goto out; } + if (!(rc = pci_enable_msi(pdev))) + dev_info(&pdev->dev, "MSI enabled\n"); + else if (ipr_debug) + dev_info(&pdev->dev, "Cannot enable MSI\n"); + dev_info(&pdev->dev, "Found IOA with IRQ: %d\n", pdev->irq); host = scsi_host_alloc(&driver_template, sizeof(*ioa_cfg)); @@ -7574,6 +7582,7 @@ out_release_regions: out_scsi_host_put: scsi_host_put(host); out_disable: + pci_disable_msi(pdev); pci_disable_device(pdev); goto out; } diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h index 8f872f816fe..79a3ae4fb2c 100644 --- a/drivers/scsi/ipr.h +++ b/drivers/scsi/ipr.h @@ -37,8 +37,8 @@ /* * Literals */ -#define IPR_DRIVER_VERSION "2.4.1" -#define IPR_DRIVER_DATE "(April 24, 2007)" +#define IPR_DRIVER_VERSION "2.4.2" +#define IPR_DRIVER_DATE "(January 21, 2009)" /* * IPR_MAX_CMD_PER_LUN: This defines the maximum number of outstanding diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index ef683f0d2b5..457d76a4cfe 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -1004,8 +1004,7 @@ static int __ips_eh_reset(struct scsi_cmnd *SC) DEBUG_VAR(1, "(%s%d) Failing active commands", ips_name, ha->host_num); while ((scb = ips_removeq_scb_head(&ha->scb_activelist))) { - scb->scsi_cmd->result = - (DID_RESET << 16) | (SUGGEST_RETRY << 24); + scb->scsi_cmd->result = DID_RESET << 16; scb->scsi_cmd->scsi_done(scb->scsi_cmd); ips_freescb(ha, scb); } diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 23808dfe22b..b3e5e08e44a 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -48,13 +48,6 @@ MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu>, " "Alex Aizman <itn780@yahoo.com>"); MODULE_DESCRIPTION("iSCSI/TCP data-path"); MODULE_LICENSE("GPL"); -#undef DEBUG_TCP - -#ifdef DEBUG_TCP -#define debug_tcp(fmt...) printk(KERN_INFO "tcp: " fmt) -#else -#define debug_tcp(fmt...) -#endif static struct scsi_transport_template *iscsi_sw_tcp_scsi_transport; static struct scsi_host_template iscsi_sw_tcp_sht; @@ -63,6 +56,21 @@ static struct iscsi_transport iscsi_sw_tcp_transport; static unsigned int iscsi_max_lun = 512; module_param_named(max_lun, iscsi_max_lun, uint, S_IRUGO); +static int iscsi_sw_tcp_dbg; +module_param_named(debug_iscsi_tcp, iscsi_sw_tcp_dbg, int, + S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug_iscsi_tcp, "Turn on debugging for iscsi_tcp module " + "Set to 1 to turn on, and zero to turn off. Default is off."); + +#define ISCSI_SW_TCP_DBG(_conn, dbg_fmt, arg...) \ + do { \ + if (iscsi_sw_tcp_dbg) \ + iscsi_conn_printk(KERN_INFO, _conn, \ + "%s " dbg_fmt, \ + __func__, ##arg); \ + } while (0); + + /** * iscsi_sw_tcp_recv - TCP receive in sendfile fashion * @rd_desc: read descriptor @@ -77,7 +85,7 @@ static int iscsi_sw_tcp_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, unsigned int consumed, total_consumed = 0; int status; - debug_tcp("in %d bytes\n", skb->len - offset); + ISCSI_SW_TCP_DBG(conn, "in %d bytes\n", skb->len - offset); do { status = 0; @@ -86,7 +94,8 @@ static int iscsi_sw_tcp_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, total_consumed += consumed; } while (consumed != 0 && status != ISCSI_TCP_SKB_DONE); - debug_tcp("read %d bytes status %d\n", skb->len - offset, status); + ISCSI_SW_TCP_DBG(conn, "read %d bytes status %d\n", + skb->len - offset, status); return total_consumed; } @@ -131,7 +140,8 @@ static void iscsi_sw_tcp_state_change(struct sock *sk) if ((sk->sk_state == TCP_CLOSE_WAIT || sk->sk_state == TCP_CLOSE) && !atomic_read(&sk->sk_rmem_alloc)) { - debug_tcp("iscsi_tcp_state_change: TCP_CLOSE|TCP_CLOSE_WAIT\n"); + ISCSI_SW_TCP_DBG(conn, "iscsi_tcp_state_change: " + "TCP_CLOSE|TCP_CLOSE_WAIT\n"); iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); } @@ -155,8 +165,8 @@ static void iscsi_sw_tcp_write_space(struct sock *sk) struct iscsi_sw_tcp_conn *tcp_sw_conn = tcp_conn->dd_data; tcp_sw_conn->old_write_space(sk); - debug_tcp("iscsi_write_space: cid %d\n", conn->id); - scsi_queue_work(conn->session->host, &conn->xmitwork); + ISCSI_SW_TCP_DBG(conn, "iscsi_write_space\n"); + iscsi_conn_queue_work(conn); } static void iscsi_sw_tcp_conn_set_callbacks(struct iscsi_conn *conn) @@ -283,7 +293,7 @@ static int iscsi_sw_tcp_xmit(struct iscsi_conn *conn) } } - debug_tcp("xmit %d bytes\n", consumed); + ISCSI_SW_TCP_DBG(conn, "xmit %d bytes\n", consumed); conn->txdata_octets += consumed; return consumed; @@ -291,7 +301,7 @@ static int iscsi_sw_tcp_xmit(struct iscsi_conn *conn) error: /* Transmit error. We could initiate error recovery * here. */ - debug_tcp("Error sending PDU, errno=%d\n", rc); + ISCSI_SW_TCP_DBG(conn, "Error sending PDU, errno=%d\n", rc); iscsi_conn_failure(conn, rc); return -EIO; } @@ -334,9 +344,10 @@ static int iscsi_sw_tcp_send_hdr_done(struct iscsi_tcp_conn *tcp_conn, struct iscsi_sw_tcp_conn *tcp_sw_conn = tcp_conn->dd_data; tcp_sw_conn->out.segment = tcp_sw_conn->out.data_segment; - debug_tcp("Header done. Next segment size %u total_size %u\n", - tcp_sw_conn->out.segment.size, - tcp_sw_conn->out.segment.total_size); + ISCSI_SW_TCP_DBG(tcp_conn->iscsi_conn, + "Header done. Next segment size %u total_size %u\n", + tcp_sw_conn->out.segment.size, + tcp_sw_conn->out.segment.total_size); return 0; } @@ -346,8 +357,8 @@ static void iscsi_sw_tcp_send_hdr_prep(struct iscsi_conn *conn, void *hdr, struct iscsi_tcp_conn *tcp_conn = conn->dd_data; struct iscsi_sw_tcp_conn *tcp_sw_conn = tcp_conn->dd_data; - debug_tcp("%s(%p%s)\n", __func__, tcp_conn, - conn->hdrdgst_en? ", digest enabled" : ""); + ISCSI_SW_TCP_DBG(conn, "%s\n", conn->hdrdgst_en ? + "digest enabled" : "digest disabled"); /* Clear the data segment - needs to be filled in by the * caller using iscsi_tcp_send_data_prep() */ @@ -389,9 +400,9 @@ iscsi_sw_tcp_send_data_prep(struct iscsi_conn *conn, struct scatterlist *sg, struct hash_desc *tx_hash = NULL; unsigned int hdr_spec_len; - debug_tcp("%s(%p, offset=%d, datalen=%d%s)\n", __func__, - tcp_conn, offset, len, - conn->datadgst_en? ", digest enabled" : ""); + ISCSI_SW_TCP_DBG(conn, "offset=%d, datalen=%d %s\n", offset, len, + conn->datadgst_en ? + "digest enabled" : "digest disabled"); /* Make sure the datalen matches what the caller said he would send. */ @@ -415,8 +426,8 @@ iscsi_sw_tcp_send_linear_data_prep(struct iscsi_conn *conn, void *data, struct hash_desc *tx_hash = NULL; unsigned int hdr_spec_len; - debug_tcp("%s(%p, datalen=%d%s)\n", __func__, tcp_conn, len, - conn->datadgst_en? ", digest enabled" : ""); + ISCSI_SW_TCP_DBG(conn, "datalen=%zd %s\n", len, conn->datadgst_en ? + "digest enabled" : "digest disabled"); /* Make sure the datalen matches what the caller said he would send. */ @@ -754,8 +765,7 @@ iscsi_sw_tcp_conn_get_stats(struct iscsi_cls_conn *cls_conn, static struct iscsi_cls_session * iscsi_sw_tcp_session_create(struct iscsi_endpoint *ep, uint16_t cmds_max, - uint16_t qdepth, uint32_t initial_cmdsn, - uint32_t *hostno) + uint16_t qdepth, uint32_t initial_cmdsn) { struct iscsi_cls_session *cls_session; struct iscsi_session *session; @@ -766,10 +776,11 @@ iscsi_sw_tcp_session_create(struct iscsi_endpoint *ep, uint16_t cmds_max, return NULL; } - shost = iscsi_host_alloc(&iscsi_sw_tcp_sht, 0, qdepth); + shost = iscsi_host_alloc(&iscsi_sw_tcp_sht, 0, 1); if (!shost) return NULL; shost->transportt = iscsi_sw_tcp_scsi_transport; + shost->cmd_per_lun = qdepth; shost->max_lun = iscsi_max_lun; shost->max_id = 0; shost->max_channel = 0; @@ -777,7 +788,6 @@ iscsi_sw_tcp_session_create(struct iscsi_endpoint *ep, uint16_t cmds_max, if (iscsi_host_add(shost, NULL)) goto free_host; - *hostno = shost->host_no; cls_session = iscsi_session_setup(&iscsi_sw_tcp_transport, shost, cmds_max, @@ -813,6 +823,12 @@ static void iscsi_sw_tcp_session_destroy(struct iscsi_cls_session *cls_session) iscsi_host_free(shost); } +static int iscsi_sw_tcp_slave_alloc(struct scsi_device *sdev) +{ + set_bit(QUEUE_FLAG_BIDI, &sdev->request_queue->queue_flags); + return 0; +} + static int iscsi_sw_tcp_slave_configure(struct scsi_device *sdev) { blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_ANY); @@ -833,6 +849,7 @@ static struct scsi_host_template iscsi_sw_tcp_sht = { .eh_device_reset_handler= iscsi_eh_device_reset, .eh_target_reset_handler= iscsi_eh_target_reset, .use_clustering = DISABLE_CLUSTERING, + .slave_alloc = iscsi_sw_tcp_slave_alloc, .slave_configure = iscsi_sw_tcp_slave_configure, .proc_name = "iscsi_tcp", .this_id = -1, diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 505825b6124..992af05aacf 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -281,7 +281,7 @@ static void fc_exch_release(struct fc_exch *ep) ep->destructor(&ep->seq, ep->arg); if (ep->lp->tt.exch_put) ep->lp->tt.exch_put(ep->lp, mp, ep->xid); - WARN_ON(!ep->esb_stat & ESB_ST_COMPLETE); + WARN_ON(!(ep->esb_stat & ESB_ST_COMPLETE)); mempool_free(ep, mp->ep_pool); } } @@ -489,7 +489,7 @@ static u16 fc_em_alloc_xid(struct fc_exch_mgr *mp, const struct fc_frame *fp) struct fc_exch *ep = NULL; if (mp->max_read) { - if (fc_frame_is_read(fp)) { + if (fc_fcp_is_read(fr_fsp(fp))) { min = mp->min_xid; max = mp->max_read; plast = &mp->last_read; @@ -1841,6 +1841,8 @@ struct fc_seq *fc_exch_seq_send(struct fc_lport *lp, fc_exch_setup_hdr(ep, fp, ep->f_ctl); sp->cnt++; + fc_fcp_ddp_setup(fr_fsp(fp), ep->xid); + if (unlikely(lp->tt.frame_send(lp, fp))) goto err; diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 2a631d7dbce..a5725f3b7ce 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -259,12 +259,62 @@ static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp) } fsp->state &= ~FC_SRB_ABORT_PENDING; - fsp->io_status = SUGGEST_RETRY << 24; + fsp->io_status = 0; fsp->status_code = FC_ERROR; fc_fcp_complete_locked(fsp); } /* + * fc_fcp_ddp_setup - calls to LLD's ddp_setup to set up DDP + * transfer for a read I/O indicated by the fc_fcp_pkt. + * @fsp: ptr to the fc_fcp_pkt + * + * This is called in exch_seq_send() when we have a newly allocated + * exchange with a valid exchange id to setup ddp. + * + * returns: none + */ +void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid) +{ + struct fc_lport *lp; + + if (!fsp) + return; + + lp = fsp->lp; + if ((fsp->req_flags & FC_SRB_READ) && + (lp->lro_enabled) && (lp->tt.ddp_setup)) { + if (lp->tt.ddp_setup(lp, xid, scsi_sglist(fsp->cmd), + scsi_sg_count(fsp->cmd))) + fsp->xfer_ddp = xid; + } +} +EXPORT_SYMBOL(fc_fcp_ddp_setup); + +/* + * fc_fcp_ddp_done - calls to LLD's ddp_done to release any + * DDP related resources for this I/O if it is initialized + * as a ddp transfer + * @fsp: ptr to the fc_fcp_pkt + * + * returns: none + */ +static void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp) +{ + struct fc_lport *lp; + + if (!fsp) + return; + + lp = fsp->lp; + if (fsp->xfer_ddp && lp->tt.ddp_done) { + fsp->xfer_len = lp->tt.ddp_done(lp, fsp->xfer_ddp); + fsp->xfer_ddp = 0; + } +} + + +/* * Receive SCSI data from target. * Called after receiving solicited data. */ @@ -289,6 +339,9 @@ static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp) len = fr_len(fp) - sizeof(*fh); buf = fc_frame_payload_get(fp, 0); + /* if this I/O is ddped, update xfer len */ + fc_fcp_ddp_done(fsp); + if (offset + len > fsp->data_len) { /* this should never happen */ if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) && @@ -435,7 +488,13 @@ static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq, * burst length (t_blen) to seq_blen, otherwise set t_blen * to max FC frame payload previously set in fsp->max_payload. */ - t_blen = lp->seq_offload ? seq_blen : fsp->max_payload; + t_blen = fsp->max_payload; + if (lp->seq_offload) { + t_blen = min(seq_blen, (size_t)lp->lso_max); + FC_DEBUG_FCP("fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n", + fsp, seq_blen, lp->lso_max, t_blen); + } + WARN_ON(t_blen < FC_MIN_MAX_PAYLOAD); if (t_blen > 512) t_blen &= ~(512 - 1); /* round down to block size */ @@ -744,6 +803,9 @@ static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp) fsp->scsi_comp_flags = flags; expected_len = fsp->data_len; + /* if ddp, update xfer len */ + fc_fcp_ddp_done(fsp); + if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) { rp_ex = (void *)(fc_rp + 1); if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) { @@ -859,7 +921,7 @@ static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp) (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) || fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) { fsp->status_code = FC_DATA_UNDRUN; - fsp->io_status = SUGGEST_RETRY << 24; + fsp->io_status = 0; } } @@ -1006,7 +1068,7 @@ static int fc_fcp_cmd_send(struct fc_lport *lp, struct fc_fcp_pkt *fsp, } memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len); - fr_cmd(fp) = fsp->cmd; + fr_fsp(fp) = fsp; rport = fsp->rport; fsp->max_payload = rport->maxframe_size; rp = rport->dd_data; @@ -1267,7 +1329,7 @@ static void fc_fcp_rec(struct fc_fcp_pkt *fsp) rp = rport->dd_data; if (!fsp->seq_ptr || rp->rp_state != RPORT_ST_READY) { fsp->status_code = FC_HRD_ERROR; - fsp->io_status = SUGGEST_RETRY << 24; + fsp->io_status = 0; fc_fcp_complete_locked(fsp); return; } @@ -1740,6 +1802,9 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp) struct fc_lport *lp; unsigned long flags; + /* release outstanding ddp context */ + fc_fcp_ddp_done(fsp); + fsp->state |= FC_SRB_COMPL; if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) { spin_unlock_bh(&fsp->scsi_pkt_lock); diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 2ae50a1188e..7ef44501ecc 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -762,10 +762,11 @@ static void fc_lport_recv_flogi_req(struct fc_seq *sp_in, remote_wwpn = get_unaligned_be64(&flp->fl_wwpn); if (remote_wwpn == lport->wwpn) { FC_DBG("FLOGI from port with same WWPN %llx " - "possible configuration error\n", remote_wwpn); + "possible configuration error\n", + (unsigned long long)remote_wwpn); goto out; } - FC_DBG("FLOGI from port WWPN %llx\n", remote_wwpn); + FC_DBG("FLOGI from port WWPN %llx\n", (unsigned long long)remote_wwpn); /* * XXX what is the right thing to do for FIDs? diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index dae65133a83..0472bb73221 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -988,7 +988,7 @@ static void fc_rport_recv_plogi_req(struct fc_rport *rport, switch (rdata->rp_state) { case RPORT_ST_INIT: FC_DEBUG_RPORT("incoming PLOGI from %6x wwpn %llx state INIT " - "- reject\n", sid, wwpn); + "- reject\n", sid, (unsigned long long)wwpn); reject = ELS_RJT_UNSUP; break; case RPORT_ST_PLOGI: diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 809d32d95c7..dfaa8adf099 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -38,6 +38,28 @@ #include <scsi/scsi_transport_iscsi.h> #include <scsi/libiscsi.h> +static int iscsi_dbg_lib; +module_param_named(debug_libiscsi, iscsi_dbg_lib, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug_libiscsi, "Turn on debugging for libiscsi module. " + "Set to 1 to turn on, and zero to turn off. Default " + "is off."); + +#define ISCSI_DBG_CONN(_conn, dbg_fmt, arg...) \ + do { \ + if (iscsi_dbg_lib) \ + iscsi_conn_printk(KERN_INFO, _conn, \ + "%s " dbg_fmt, \ + __func__, ##arg); \ + } while (0); + +#define ISCSI_DBG_SESSION(_session, dbg_fmt, arg...) \ + do { \ + if (iscsi_dbg_lib) \ + iscsi_session_printk(KERN_INFO, _session, \ + "%s " dbg_fmt, \ + __func__, ##arg); \ + } while (0); + /* Serial Number Arithmetic, 32 bits, less than, RFC1982 */ #define SNA32_CHECK 2147483648UL @@ -54,6 +76,15 @@ static int iscsi_sna_lte(u32 n1, u32 n2) (n1 > n2 && (n2 - n1 < SNA32_CHECK))); } +inline void iscsi_conn_queue_work(struct iscsi_conn *conn) +{ + struct Scsi_Host *shost = conn->session->host; + struct iscsi_host *ihost = shost_priv(shost); + + queue_work(ihost->workq, &conn->xmitwork); +} +EXPORT_SYMBOL_GPL(iscsi_conn_queue_work); + void iscsi_update_cmdsn(struct iscsi_session *session, struct iscsi_nopin *hdr) { @@ -81,8 +112,7 @@ iscsi_update_cmdsn(struct iscsi_session *session, struct iscsi_nopin *hdr) if (!list_empty(&session->leadconn->xmitqueue) || !list_empty(&session->leadconn->mgmtqueue)) { if (!(session->tt->caps & CAP_DATA_PATH_OFFLOAD)) - scsi_queue_work(session->host, - &session->leadconn->xmitwork); + iscsi_conn_queue_work(session->leadconn); } } } @@ -176,10 +206,11 @@ static int iscsi_prep_ecdb_ahs(struct iscsi_task *task) ecdb_ahdr->reserved = 0; memcpy(ecdb_ahdr->ecdb, cmd->cmnd + ISCSI_CDB_SIZE, rlen); - debug_scsi("iscsi_prep_ecdb_ahs: varlen_cdb_len %d " - "rlen %d pad_len %d ahs_length %d iscsi_headers_size %u\n", - cmd->cmd_len, rlen, pad_len, ahslength, task->hdr_len); - + ISCSI_DBG_SESSION(task->conn->session, + "iscsi_prep_ecdb_ahs: varlen_cdb_len %d " + "rlen %d pad_len %d ahs_length %d iscsi_headers_size " + "%u\n", cmd->cmd_len, rlen, pad_len, ahslength, + task->hdr_len); return 0; } @@ -201,10 +232,11 @@ static int iscsi_prep_bidi_ahs(struct iscsi_task *task) rlen_ahdr->reserved = 0; rlen_ahdr->read_length = cpu_to_be32(scsi_in(sc)->length); - debug_scsi("bidi-in rlen_ahdr->read_length(%d) " - "rlen_ahdr->ahslength(%d)\n", - be32_to_cpu(rlen_ahdr->read_length), - be16_to_cpu(rlen_ahdr->ahslength)); + ISCSI_DBG_SESSION(task->conn->session, + "bidi-in rlen_ahdr->read_length(%d) " + "rlen_ahdr->ahslength(%d)\n", + be32_to_cpu(rlen_ahdr->read_length), + be16_to_cpu(rlen_ahdr->ahslength)); return 0; } @@ -335,13 +367,15 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_task *task) list_move_tail(&task->running, &conn->run_list); conn->scsicmd_pdus_cnt++; - debug_scsi("iscsi prep [%s cid %d sc %p cdb 0x%x itt 0x%x len %d " - "bidi_len %d cmdsn %d win %d]\n", scsi_bidi_cmnd(sc) ? - "bidirectional" : sc->sc_data_direction == DMA_TO_DEVICE ? - "write" : "read", conn->id, sc, sc->cmnd[0], task->itt, - scsi_bufflen(sc), - scsi_bidi_cmnd(sc) ? scsi_in(sc)->length : 0, - session->cmdsn, session->max_cmdsn - session->exp_cmdsn + 1); + ISCSI_DBG_SESSION(session, "iscsi prep [%s cid %d sc %p cdb 0x%x " + "itt 0x%x len %d bidi_len %d cmdsn %d win %d]\n", + scsi_bidi_cmnd(sc) ? "bidirectional" : + sc->sc_data_direction == DMA_TO_DEVICE ? + "write" : "read", conn->id, sc, sc->cmnd[0], + task->itt, scsi_bufflen(sc), + scsi_bidi_cmnd(sc) ? scsi_in(sc)->length : 0, + session->cmdsn, + session->max_cmdsn - session->exp_cmdsn + 1); return 0; } @@ -483,9 +517,9 @@ static int iscsi_prep_mgmt_task(struct iscsi_conn *conn, task->state = ISCSI_TASK_RUNNING; list_move_tail(&task->running, &conn->mgmt_run_list); - debug_scsi("mgmtpdu [op 0x%x hdr->itt 0x%x datalen %d]\n", - hdr->opcode & ISCSI_OPCODE_MASK, hdr->itt, - task->data_count); + ISCSI_DBG_SESSION(session, "mgmtpdu [op 0x%x hdr->itt 0x%x " + "datalen %d]\n", hdr->opcode & ISCSI_OPCODE_MASK, + hdr->itt, task->data_count); return 0; } @@ -560,7 +594,7 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, goto free_task; } else - scsi_queue_work(conn->session->host, &conn->xmitwork); + iscsi_conn_queue_work(conn); return task; @@ -637,8 +671,9 @@ invalid_datalen: memcpy(sc->sense_buffer, data + 2, min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE)); - debug_scsi("copied %d bytes of sense\n", - min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE)); + ISCSI_DBG_SESSION(session, "copied %d bytes of sense\n", + min_t(uint16_t, senselen, + SCSI_SENSE_BUFFERSIZE)); } if (rhdr->flags & (ISCSI_FLAG_CMD_BIDI_UNDERFLOW | @@ -666,8 +701,8 @@ invalid_datalen: sc->result = (DID_BAD_TARGET << 16) | rhdr->cmd_status; } out: - debug_scsi("done [sc %lx res %d itt 0x%x]\n", - (long)sc, sc->result, task->itt); + ISCSI_DBG_SESSION(session, "done [sc %p res %d itt 0x%x]\n", + sc, sc->result, task->itt); conn->scsirsp_pdus_cnt++; __iscsi_put_task(task); @@ -835,8 +870,8 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, else itt = ~0U; - debug_scsi("[op 0x%x cid %d itt 0x%x len %d]\n", - opcode, conn->id, itt, datalen); + ISCSI_DBG_SESSION(session, "[op 0x%x cid %d itt 0x%x len %d]\n", + opcode, conn->id, itt, datalen); if (itt == ~0U) { iscsi_update_cmdsn(session, (struct iscsi_nopin*)hdr); @@ -1034,10 +1069,9 @@ struct iscsi_task *iscsi_itt_to_ctask(struct iscsi_conn *conn, itt_t itt) } EXPORT_SYMBOL_GPL(iscsi_itt_to_ctask); -void iscsi_session_failure(struct iscsi_cls_session *cls_session, +void iscsi_session_failure(struct iscsi_session *session, enum iscsi_err err) { - struct iscsi_session *session = cls_session->dd_data; struct iscsi_conn *conn; struct device *dev; unsigned long flags; @@ -1095,10 +1129,10 @@ static int iscsi_check_cmdsn_window_closed(struct iscsi_conn *conn) * Check for iSCSI window and take care of CmdSN wrap-around */ if (!iscsi_sna_lte(session->queued_cmdsn, session->max_cmdsn)) { - debug_scsi("iSCSI CmdSN closed. ExpCmdSn %u MaxCmdSN %u " - "CmdSN %u/%u\n", session->exp_cmdsn, - session->max_cmdsn, session->cmdsn, - session->queued_cmdsn); + ISCSI_DBG_SESSION(session, "iSCSI CmdSN closed. ExpCmdSn " + "%u MaxCmdSN %u CmdSN %u/%u\n", + session->exp_cmdsn, session->max_cmdsn, + session->cmdsn, session->queued_cmdsn); return -ENOSPC; } return 0; @@ -1133,7 +1167,7 @@ void iscsi_requeue_task(struct iscsi_task *task) struct iscsi_conn *conn = task->conn; list_move_tail(&task->running, &conn->requeue); - scsi_queue_work(conn->session->host, &conn->xmitwork); + iscsi_conn_queue_work(conn); } EXPORT_SYMBOL_GPL(iscsi_requeue_task); @@ -1152,7 +1186,7 @@ static int iscsi_data_xmit(struct iscsi_conn *conn) spin_lock_bh(&conn->session->lock); if (unlikely(conn->suspend_tx)) { - debug_scsi("conn %d Tx suspended!\n", conn->id); + ISCSI_DBG_SESSION(conn->session, "Tx suspended!\n"); spin_unlock_bh(&conn->session->lock); return -ENODATA; } @@ -1386,7 +1420,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) goto prepd_reject; } } else - scsi_queue_work(session->host, &conn->xmitwork); + iscsi_conn_queue_work(conn); session->queued_cmdsn++; spin_unlock(&session->lock); @@ -1398,7 +1432,8 @@ prepd_reject: iscsi_complete_command(task); reject: spin_unlock(&session->lock); - debug_scsi("cmd 0x%x rejected (%d)\n", sc->cmnd[0], reason); + ISCSI_DBG_SESSION(session, "cmd 0x%x rejected (%d)\n", + sc->cmnd[0], reason); spin_lock(host->host_lock); return SCSI_MLQUEUE_TARGET_BUSY; @@ -1407,7 +1442,8 @@ prepd_fault: iscsi_complete_command(task); fault: spin_unlock(&session->lock); - debug_scsi("iscsi: cmd 0x%x is not queued (%d)\n", sc->cmnd[0], reason); + ISCSI_DBG_SESSION(session, "iscsi: cmd 0x%x is not queued (%d)\n", + sc->cmnd[0], reason); if (!scsi_bidi_cmnd(sc)) scsi_set_resid(sc, scsi_bufflen(sc)); else { @@ -1422,8 +1458,6 @@ EXPORT_SYMBOL_GPL(iscsi_queuecommand); int iscsi_change_queue_depth(struct scsi_device *sdev, int depth) { - if (depth > ISCSI_MAX_CMD_PER_LUN) - depth = ISCSI_MAX_CMD_PER_LUN; scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth); return sdev->queue_depth; } @@ -1457,8 +1491,10 @@ int iscsi_eh_target_reset(struct scsi_cmnd *sc) spin_lock_bh(&session->lock); if (session->state == ISCSI_STATE_TERMINATE) { failed: - debug_scsi("failing target reset: session terminated " - "[CID %d age %d]\n", conn->id, session->age); + iscsi_session_printk(KERN_INFO, session, + "failing target reset: Could not log " + "back into target [age %d]\n", + session->age); spin_unlock_bh(&session->lock); mutex_unlock(&session->eh_mutex); return FAILED; @@ -1472,7 +1508,7 @@ failed: */ iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); - debug_scsi("iscsi_eh_target_reset wait for relogin\n"); + ISCSI_DBG_SESSION(session, "wait for relogin\n"); wait_event_interruptible(conn->ehwait, session->state == ISCSI_STATE_TERMINATE || session->state == ISCSI_STATE_LOGGED_IN || @@ -1501,7 +1537,7 @@ static void iscsi_tmf_timedout(unsigned long data) spin_lock(&session->lock); if (conn->tmf_state == TMF_QUEUED) { conn->tmf_state = TMF_TIMEDOUT; - debug_scsi("tmf timedout\n"); + ISCSI_DBG_SESSION(session, "tmf timedout\n"); /* unblock eh_abort() */ wake_up(&conn->ehwait); } @@ -1521,7 +1557,7 @@ static int iscsi_exec_task_mgmt_fn(struct iscsi_conn *conn, spin_unlock_bh(&session->lock); iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); spin_lock_bh(&session->lock); - debug_scsi("tmf exec failure\n"); + ISCSI_DBG_SESSION(session, "tmf exec failure\n"); return -EPERM; } conn->tmfcmd_pdus_cnt++; @@ -1529,7 +1565,7 @@ static int iscsi_exec_task_mgmt_fn(struct iscsi_conn *conn, conn->tmf_timer.function = iscsi_tmf_timedout; conn->tmf_timer.data = (unsigned long)conn; add_timer(&conn->tmf_timer); - debug_scsi("tmf set timeout\n"); + ISCSI_DBG_SESSION(session, "tmf set timeout\n"); spin_unlock_bh(&session->lock); mutex_unlock(&session->eh_mutex); @@ -1567,22 +1603,27 @@ static void fail_all_commands(struct iscsi_conn *conn, unsigned lun, { struct iscsi_task *task, *tmp; - if (conn->task && (conn->task->sc->device->lun == lun || lun == -1)) - conn->task = NULL; + if (conn->task) { + if (lun == -1 || + (conn->task->sc && conn->task->sc->device->lun == lun)) + conn->task = NULL; + } /* flush pending */ list_for_each_entry_safe(task, tmp, &conn->xmitqueue, running) { if (lun == task->sc->device->lun || lun == -1) { - debug_scsi("failing pending sc %p itt 0x%x\n", - task->sc, task->itt); + ISCSI_DBG_SESSION(conn->session, + "failing pending sc %p itt 0x%x\n", + task->sc, task->itt); fail_command(conn, task, error << 16); } } list_for_each_entry_safe(task, tmp, &conn->requeue, running) { if (lun == task->sc->device->lun || lun == -1) { - debug_scsi("failing requeued sc %p itt 0x%x\n", - task->sc, task->itt); + ISCSI_DBG_SESSION(conn->session, + "failing requeued sc %p itt 0x%x\n", + task->sc, task->itt); fail_command(conn, task, error << 16); } } @@ -1590,8 +1631,9 @@ static void fail_all_commands(struct iscsi_conn *conn, unsigned lun, /* fail all other running */ list_for_each_entry_safe(task, tmp, &conn->run_list, running) { if (lun == task->sc->device->lun || lun == -1) { - debug_scsi("failing in progress sc %p itt 0x%x\n", - task->sc, task->itt); + ISCSI_DBG_SESSION(conn->session, + "failing in progress sc %p itt 0x%x\n", + task->sc, task->itt); fail_command(conn, task, error << 16); } } @@ -1599,9 +1641,12 @@ static void fail_all_commands(struct iscsi_conn *conn, unsigned lun, void iscsi_suspend_tx(struct iscsi_conn *conn) { + struct Scsi_Host *shost = conn->session->host; + struct iscsi_host *ihost = shost_priv(shost); + set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); if (!(conn->session->tt->caps & CAP_DATA_PATH_OFFLOAD)) - scsi_flush_work(conn->session->host); + flush_workqueue(ihost->workq); } EXPORT_SYMBOL_GPL(iscsi_suspend_tx); @@ -1609,7 +1654,7 @@ static void iscsi_start_tx(struct iscsi_conn *conn) { clear_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); if (!(conn->session->tt->caps & CAP_DATA_PATH_OFFLOAD)) - scsi_queue_work(conn->session->host, &conn->xmitwork); + iscsi_conn_queue_work(conn); } static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd) @@ -1622,7 +1667,7 @@ static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd) cls_session = starget_to_session(scsi_target(scmd->device)); session = cls_session->dd_data; - debug_scsi("scsi cmd %p timedout\n", scmd); + ISCSI_DBG_SESSION(session, "scsi cmd %p timedout\n", scmd); spin_lock(&session->lock); if (session->state != ISCSI_STATE_LOGGED_IN) { @@ -1662,8 +1707,8 @@ static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd) rc = BLK_EH_RESET_TIMER; done: spin_unlock(&session->lock); - debug_scsi("return %s\n", rc == BLK_EH_RESET_TIMER ? - "timer reset" : "nh"); + ISCSI_DBG_SESSION(session, "return %s\n", rc == BLK_EH_RESET_TIMER ? + "timer reset" : "nh"); return rc; } @@ -1697,13 +1742,13 @@ static void iscsi_check_transport_timeouts(unsigned long data) if (time_before_eq(last_recv + recv_timeout, jiffies)) { /* send a ping to try to provoke some traffic */ - debug_scsi("Sending nopout as ping on conn %p\n", conn); + ISCSI_DBG_CONN(conn, "Sending nopout as ping\n"); iscsi_send_nopout(conn, NULL); next_timeout = conn->last_ping + (conn->ping_timeout * HZ); } else next_timeout = last_recv + recv_timeout; - debug_scsi("Setting next tmo %lu\n", next_timeout); + ISCSI_DBG_CONN(conn, "Setting next tmo %lu\n", next_timeout); mod_timer(&conn->transport_timer, next_timeout); done: spin_unlock(&session->lock); @@ -1740,7 +1785,8 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) * got the command. */ if (!sc->SCp.ptr) { - debug_scsi("sc never reached iscsi layer or it completed.\n"); + ISCSI_DBG_SESSION(session, "sc never reached iscsi layer or " + "it completed.\n"); spin_unlock_bh(&session->lock); mutex_unlock(&session->eh_mutex); return SUCCESS; @@ -1762,11 +1808,13 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) age = session->age; task = (struct iscsi_task *)sc->SCp.ptr; - debug_scsi("aborting [sc %p itt 0x%x]\n", sc, task->itt); + ISCSI_DBG_SESSION(session, "aborting [sc %p itt 0x%x]\n", + sc, task->itt); /* task completed before time out */ if (!task->sc) { - debug_scsi("sc completed while abort in progress\n"); + ISCSI_DBG_SESSION(session, "sc completed while abort in " + "progress\n"); goto success; } @@ -1815,7 +1863,8 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) if (!sc->SCp.ptr) { conn->tmf_state = TMF_INITIAL; /* task completed before tmf abort response */ - debug_scsi("sc completed while abort in progress\n"); + ISCSI_DBG_SESSION(session, "sc completed while abort " + "in progress\n"); goto success; } /* fall through */ @@ -1827,15 +1876,16 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) success: spin_unlock_bh(&session->lock); success_unlocked: - debug_scsi("abort success [sc %lx itt 0x%x]\n", (long)sc, task->itt); + ISCSI_DBG_SESSION(session, "abort success [sc %p itt 0x%x]\n", + sc, task->itt); mutex_unlock(&session->eh_mutex); return SUCCESS; failed: spin_unlock_bh(&session->lock); failed_unlocked: - debug_scsi("abort failed [sc %p itt 0x%x]\n", sc, - task ? task->itt : 0); + ISCSI_DBG_SESSION(session, "abort failed [sc %p itt 0x%x]\n", sc, + task ? task->itt : 0); mutex_unlock(&session->eh_mutex); return FAILED; } @@ -1862,7 +1912,8 @@ int iscsi_eh_device_reset(struct scsi_cmnd *sc) cls_session = starget_to_session(scsi_target(sc->device)); session = cls_session->dd_data; - debug_scsi("LU Reset [sc %p lun %u]\n", sc, sc->device->lun); + ISCSI_DBG_SESSION(session, "LU Reset [sc %p lun %u]\n", + sc, sc->device->lun); mutex_lock(&session->eh_mutex); spin_lock_bh(&session->lock); @@ -1916,8 +1967,8 @@ int iscsi_eh_device_reset(struct scsi_cmnd *sc) unlock: spin_unlock_bh(&session->lock); done: - debug_scsi("iscsi_eh_device_reset %s\n", - rc == SUCCESS ? "SUCCESS" : "FAILED"); + ISCSI_DBG_SESSION(session, "dev reset result = %s\n", + rc == SUCCESS ? "SUCCESS" : "FAILED"); mutex_unlock(&session->eh_mutex); return rc; } @@ -1944,7 +1995,7 @@ iscsi_pool_init(struct iscsi_pool *q, int max, void ***items, int item_size) num_arrays++; q->pool = kzalloc(num_arrays * max * sizeof(void*), GFP_KERNEL); if (q->pool == NULL) - goto enomem; + return -ENOMEM; q->queue = kfifo_init((void*)q->pool, max * sizeof(void*), GFP_KERNEL, NULL); @@ -1979,8 +2030,7 @@ void iscsi_pool_free(struct iscsi_pool *q) for (i = 0; i < q->max; i++) kfree(q->pool[i]); - if (q->pool) - kfree(q->pool); + kfree(q->pool); kfree(q->queue); } EXPORT_SYMBOL_GPL(iscsi_pool_free); @@ -1998,6 +2048,9 @@ int iscsi_host_add(struct Scsi_Host *shost, struct device *pdev) if (!shost->can_queue) shost->can_queue = ISCSI_DEF_XMIT_CMDS_MAX; + if (!shost->cmd_per_lun) + shost->cmd_per_lun = ISCSI_DEF_CMD_PER_LUN; + if (!shost->transportt->eh_timed_out) shost->transportt->eh_timed_out = iscsi_eh_cmd_timed_out; return scsi_add_host(shost, pdev); @@ -2008,13 +2061,13 @@ EXPORT_SYMBOL_GPL(iscsi_host_add); * iscsi_host_alloc - allocate a host and driver data * @sht: scsi host template * @dd_data_size: driver host data size - * @qdepth: default device queue depth + * @xmit_can_sleep: bool indicating if LLD will queue IO from a work queue * * This should be called by partial offload and software iscsi drivers. * To access the driver specific memory use the iscsi_host_priv() macro. */ struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht, - int dd_data_size, uint16_t qdepth) + int dd_data_size, bool xmit_can_sleep) { struct Scsi_Host *shost; struct iscsi_host *ihost; @@ -2022,28 +2075,31 @@ struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht, shost = scsi_host_alloc(sht, sizeof(struct iscsi_host) + dd_data_size); if (!shost) return NULL; + ihost = shost_priv(shost); - if (qdepth > ISCSI_MAX_CMD_PER_LUN || qdepth < 1) { - if (qdepth != 0) - printk(KERN_ERR "iscsi: invalid queue depth of %d. " - "Queue depth must be between 1 and %d.\n", - qdepth, ISCSI_MAX_CMD_PER_LUN); - qdepth = ISCSI_DEF_CMD_PER_LUN; + if (xmit_can_sleep) { + snprintf(ihost->workq_name, sizeof(ihost->workq_name), + "iscsi_q_%d", shost->host_no); + ihost->workq = create_singlethread_workqueue(ihost->workq_name); + if (!ihost->workq) + goto free_host; } - shost->cmd_per_lun = qdepth; - ihost = shost_priv(shost); spin_lock_init(&ihost->lock); ihost->state = ISCSI_HOST_SETUP; ihost->num_sessions = 0; init_waitqueue_head(&ihost->session_removal_wq); return shost; + +free_host: + scsi_host_put(shost); + return NULL; } EXPORT_SYMBOL_GPL(iscsi_host_alloc); static void iscsi_notify_host_removed(struct iscsi_cls_session *cls_session) { - iscsi_session_failure(cls_session, ISCSI_ERR_INVALID_HOST); + iscsi_session_failure(cls_session->dd_data, ISCSI_ERR_INVALID_HOST); } /** @@ -2069,6 +2125,8 @@ void iscsi_host_remove(struct Scsi_Host *shost) flush_signals(current); scsi_remove_host(shost); + if (ihost->workq) + destroy_workqueue(ihost->workq); } EXPORT_SYMBOL_GPL(iscsi_host_remove); @@ -2467,14 +2525,16 @@ flush_control_queues(struct iscsi_session *session, struct iscsi_conn *conn) /* handle pending */ list_for_each_entry_safe(task, tmp, &conn->mgmtqueue, running) { - debug_scsi("flushing pending mgmt task itt 0x%x\n", task->itt); + ISCSI_DBG_SESSION(session, "flushing pending mgmt task " + "itt 0x%x\n", task->itt); /* release ref from prep task */ __iscsi_put_task(task); } /* handle running */ list_for_each_entry_safe(task, tmp, &conn->mgmt_run_list, running) { - debug_scsi("flushing running mgmt task itt 0x%x\n", task->itt); + ISCSI_DBG_SESSION(session, "flushing running mgmt task " + "itt 0x%x\n", task->itt); /* release ref from prep task */ __iscsi_put_task(task); } @@ -2524,7 +2584,7 @@ static void iscsi_start_session_recovery(struct iscsi_session *session, conn->datadgst_en = 0; if (session->state == ISCSI_STATE_IN_RECOVERY && old_stop_stage != STOP_CONN_RECOVER) { - debug_scsi("blocking session\n"); + ISCSI_DBG_SESSION(session, "blocking session\n"); iscsi_block_session(session->cls_session); } } diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c index e7705d3532c..91f8ce4d8d0 100644 --- a/drivers/scsi/libiscsi_tcp.c +++ b/drivers/scsi/libiscsi_tcp.c @@ -49,13 +49,21 @@ MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu>, " "Alex Aizman <itn780@yahoo.com>"); MODULE_DESCRIPTION("iSCSI/TCP data-path"); MODULE_LICENSE("GPL"); -#undef DEBUG_TCP -#ifdef DEBUG_TCP -#define debug_tcp(fmt...) printk(KERN_INFO "tcp: " fmt) -#else -#define debug_tcp(fmt...) -#endif +static int iscsi_dbg_libtcp; +module_param_named(debug_libiscsi_tcp, iscsi_dbg_libtcp, int, + S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug_libiscsi_tcp, "Turn on debugging for libiscsi_tcp " + "module. Set to 1 to turn on, and zero to turn off. Default " + "is off."); + +#define ISCSI_DBG_TCP(_conn, dbg_fmt, arg...) \ + do { \ + if (iscsi_dbg_libtcp) \ + iscsi_conn_printk(KERN_INFO, _conn, \ + "%s " dbg_fmt, \ + __func__, ##arg); \ + } while (0); static int iscsi_tcp_hdr_recv_done(struct iscsi_tcp_conn *tcp_conn, struct iscsi_segment *segment); @@ -123,18 +131,13 @@ static void iscsi_tcp_segment_map(struct iscsi_segment *segment, int recv) if (page_count(sg_page(sg)) >= 1 && !recv) return; - debug_tcp("iscsi_tcp_segment_map %s %p\n", recv ? "recv" : "xmit", - segment); segment->sg_mapped = kmap_atomic(sg_page(sg), KM_SOFTIRQ0); segment->data = segment->sg_mapped + sg->offset + segment->sg_offset; } void iscsi_tcp_segment_unmap(struct iscsi_segment *segment) { - debug_tcp("iscsi_tcp_segment_unmap %p\n", segment); - if (segment->sg_mapped) { - debug_tcp("iscsi_tcp_segment_unmap valid\n"); kunmap_atomic(segment->sg_mapped, KM_SOFTIRQ0); segment->sg_mapped = NULL; segment->data = NULL; @@ -180,8 +183,9 @@ int iscsi_tcp_segment_done(struct iscsi_tcp_conn *tcp_conn, struct scatterlist sg; unsigned int pad; - debug_tcp("copied %u %u size %u %s\n", segment->copied, copied, - segment->size, recv ? "recv" : "xmit"); + ISCSI_DBG_TCP(tcp_conn->iscsi_conn, "copied %u %u size %u %s\n", + segment->copied, copied, segment->size, + recv ? "recv" : "xmit"); if (segment->hash && copied) { /* * If a segment is kmapd we must unmap it before sending @@ -214,8 +218,8 @@ int iscsi_tcp_segment_done(struct iscsi_tcp_conn *tcp_conn, iscsi_tcp_segment_unmap(segment); /* Do we have more scatterlist entries? */ - debug_tcp("total copied %u total size %u\n", segment->total_copied, - segment->total_size); + ISCSI_DBG_TCP(tcp_conn->iscsi_conn, "total copied %u total size %u\n", + segment->total_copied, segment->total_size); if (segment->total_copied < segment->total_size) { /* Proceed to the next entry in the scatterlist. */ iscsi_tcp_segment_init_sg(segment, sg_next(segment->sg), @@ -229,7 +233,8 @@ int iscsi_tcp_segment_done(struct iscsi_tcp_conn *tcp_conn, if (!(tcp_conn->iscsi_conn->session->tt->caps & CAP_PADDING_OFFLOAD)) { pad = iscsi_padding(segment->total_copied); if (pad != 0) { - debug_tcp("consume %d pad bytes\n", pad); + ISCSI_DBG_TCP(tcp_conn->iscsi_conn, + "consume %d pad bytes\n", pad); segment->total_size += pad; segment->size = pad; segment->data = segment->padbuf; @@ -278,13 +283,13 @@ iscsi_tcp_segment_recv(struct iscsi_tcp_conn *tcp_conn, while (!iscsi_tcp_segment_done(tcp_conn, segment, 1, copy)) { if (copied == len) { - debug_tcp("iscsi_tcp_segment_recv copied %d bytes\n", - len); + ISCSI_DBG_TCP(tcp_conn->iscsi_conn, + "copied %d bytes\n", len); break; } copy = min(len - copied, segment->size - segment->copied); - debug_tcp("iscsi_tcp_segment_recv copying %d\n", copy); + ISCSI_DBG_TCP(tcp_conn->iscsi_conn, "copying %d\n", copy); memcpy(segment->data + segment->copied, ptr + copied, copy); copied += copy; } @@ -311,7 +316,7 @@ iscsi_tcp_dgst_verify(struct iscsi_tcp_conn *tcp_conn, if (memcmp(segment->recv_digest, segment->digest, segment->digest_len)) { - debug_scsi("digest mismatch\n"); + ISCSI_DBG_TCP(tcp_conn->iscsi_conn, "digest mismatch\n"); return 0; } @@ -355,12 +360,8 @@ iscsi_segment_seek_sg(struct iscsi_segment *segment, struct scatterlist *sg; unsigned int i; - debug_scsi("iscsi_segment_seek_sg offset %u size %llu\n", - offset, size); __iscsi_segment_init(segment, size, done, hash); for_each_sg(sg_list, sg, sg_count, i) { - debug_scsi("sg %d, len %u offset %u\n", i, sg->length, - sg->offset); if (offset < sg->length) { iscsi_tcp_segment_init_sg(segment, sg, offset); return 0; @@ -382,8 +383,9 @@ EXPORT_SYMBOL_GPL(iscsi_segment_seek_sg); */ void iscsi_tcp_hdr_recv_prep(struct iscsi_tcp_conn *tcp_conn) { - debug_tcp("iscsi_tcp_hdr_recv_prep(%p%s)\n", tcp_conn, - tcp_conn->iscsi_conn->hdrdgst_en ? ", digest enabled" : ""); + ISCSI_DBG_TCP(tcp_conn->iscsi_conn, + "(%s)\n", tcp_conn->iscsi_conn->hdrdgst_en ? + "digest enabled" : "digest disabled"); iscsi_segment_init_linear(&tcp_conn->in.segment, tcp_conn->in.hdr_buf, sizeof(struct iscsi_hdr), iscsi_tcp_hdr_recv_done, NULL); @@ -446,7 +448,7 @@ void iscsi_tcp_cleanup_task(struct iscsi_task *task) while (__kfifo_get(tcp_task->r2tqueue, (void*)&r2t, sizeof(void*))) { __kfifo_put(tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); - debug_scsi("iscsi_tcp_cleanup_task pending r2t dropped\n"); + ISCSI_DBG_TCP(task->conn, "pending r2t dropped\n"); } r2t = tcp_task->r2t; @@ -476,8 +478,8 @@ static int iscsi_tcp_data_in(struct iscsi_conn *conn, struct iscsi_task *task) return 0; if (tcp_task->exp_datasn != datasn) { - debug_tcp("%s: task->exp_datasn(%d) != rhdr->datasn(%d)\n", - __func__, tcp_task->exp_datasn, datasn); + ISCSI_DBG_TCP(conn, "task->exp_datasn(%d) != rhdr->datasn(%d)" + "\n", tcp_task->exp_datasn, datasn); return ISCSI_ERR_DATASN; } @@ -485,9 +487,9 @@ static int iscsi_tcp_data_in(struct iscsi_conn *conn, struct iscsi_task *task) tcp_task->data_offset = be32_to_cpu(rhdr->offset); if (tcp_task->data_offset + tcp_conn->in.datalen > total_in_length) { - debug_tcp("%s: data_offset(%d) + data_len(%d) > total_length_in(%d)\n", - __func__, tcp_task->data_offset, - tcp_conn->in.datalen, total_in_length); + ISCSI_DBG_TCP(conn, "data_offset(%d) + data_len(%d) > " + "total_length_in(%d)\n", tcp_task->data_offset, + tcp_conn->in.datalen, total_in_length); return ISCSI_ERR_DATA_OFFSET; } @@ -518,8 +520,8 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task) } if (tcp_task->exp_datasn != r2tsn){ - debug_tcp("%s: task->exp_datasn(%d) != rhdr->r2tsn(%d)\n", - __func__, tcp_task->exp_datasn, r2tsn); + ISCSI_DBG_TCP(conn, "task->exp_datasn(%d) != rhdr->r2tsn(%d)\n", + tcp_task->exp_datasn, r2tsn); return ISCSI_ERR_R2TSN; } @@ -552,9 +554,9 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task) } if (r2t->data_length > session->max_burst) - debug_scsi("invalid R2T with data len %u and max burst %u." - "Attempting to execute request.\n", - r2t->data_length, session->max_burst); + ISCSI_DBG_TCP(conn, "invalid R2T with data len %u and max " + "burst %u. Attempting to execute request.\n", + r2t->data_length, session->max_burst); r2t->data_offset = be32_to_cpu(rhdr->data_offset); if (r2t->data_offset + r2t->data_length > scsi_out(task->sc)->length) { @@ -641,8 +643,8 @@ iscsi_tcp_hdr_dissect(struct iscsi_conn *conn, struct iscsi_hdr *hdr) if (rc) return rc; - debug_tcp("opcode 0x%x ahslen %d datalen %d\n", - opcode, ahslen, tcp_conn->in.datalen); + ISCSI_DBG_TCP(conn, "opcode 0x%x ahslen %d datalen %d\n", + opcode, ahslen, tcp_conn->in.datalen); switch(opcode) { case ISCSI_OP_SCSI_DATA_IN: @@ -674,10 +676,10 @@ iscsi_tcp_hdr_dissect(struct iscsi_conn *conn, struct iscsi_hdr *hdr) !(conn->session->tt->caps & CAP_DIGEST_OFFLOAD)) rx_hash = tcp_conn->rx_hash; - debug_tcp("iscsi_tcp_begin_data_in(%p, offset=%d, " - "datalen=%d)\n", tcp_conn, - tcp_task->data_offset, - tcp_conn->in.datalen); + ISCSI_DBG_TCP(conn, "iscsi_tcp_begin_data_in( " + "offset=%d, datalen=%d)\n", + tcp_task->data_offset, + tcp_conn->in.datalen); rc = iscsi_segment_seek_sg(&tcp_conn->in.segment, sdb->table.sgl, sdb->table.nents, @@ -854,10 +856,10 @@ int iscsi_tcp_recv_skb(struct iscsi_conn *conn, struct sk_buff *skb, unsigned int consumed = 0; int rc = 0; - debug_tcp("in %d bytes\n", skb->len - offset); + ISCSI_DBG_TCP(conn, "in %d bytes\n", skb->len - offset); if (unlikely(conn->suspend_rx)) { - debug_tcp("conn %d Rx suspended!\n", conn->id); + ISCSI_DBG_TCP(conn, "Rx suspended!\n"); *status = ISCSI_TCP_SUSPENDED; return 0; } @@ -874,15 +876,16 @@ int iscsi_tcp_recv_skb(struct iscsi_conn *conn, struct sk_buff *skb, avail = skb_seq_read(consumed, &ptr, &seq); if (avail == 0) { - debug_tcp("no more data avail. Consumed %d\n", - consumed); + ISCSI_DBG_TCP(conn, "no more data avail. Consumed %d\n", + consumed); *status = ISCSI_TCP_SKB_DONE; skb_abort_seq_read(&seq); goto skb_done; } BUG_ON(segment->copied >= segment->size); - debug_tcp("skb %p ptr=%p avail=%u\n", skb, ptr, avail); + ISCSI_DBG_TCP(conn, "skb %p ptr=%p avail=%u\n", skb, ptr, + avail); rc = iscsi_tcp_segment_recv(tcp_conn, segment, ptr, avail); BUG_ON(rc == 0); consumed += rc; @@ -895,11 +898,11 @@ int iscsi_tcp_recv_skb(struct iscsi_conn *conn, struct sk_buff *skb, segment_done: *status = ISCSI_TCP_SEGMENT_DONE; - debug_tcp("segment done\n"); + ISCSI_DBG_TCP(conn, "segment done\n"); rc = segment->done(tcp_conn, segment); if (rc != 0) { *status = ISCSI_TCP_CONN_ERR; - debug_tcp("Error receiving PDU, errno=%d\n", rc); + ISCSI_DBG_TCP(conn, "Error receiving PDU, errno=%d\n", rc); iscsi_conn_failure(conn, rc); return 0; } @@ -929,8 +932,7 @@ int iscsi_tcp_task_init(struct iscsi_task *task) * mgmt tasks do not have a scatterlist since they come * in from the iscsi interface. */ - debug_scsi("mtask deq [cid %d itt 0x%x]\n", conn->id, - task->itt); + ISCSI_DBG_TCP(conn, "mtask deq [itt 0x%x]\n", task->itt); return conn->session->tt->init_pdu(task, 0, task->data_count); } @@ -939,9 +941,8 @@ int iscsi_tcp_task_init(struct iscsi_task *task) tcp_task->exp_datasn = 0; /* Prepare PDU, optionally w/ immediate data */ - debug_scsi("task deq [cid %d itt 0x%x imm %d unsol %d]\n", - conn->id, task->itt, task->imm_count, - task->unsol_r2t.data_length); + ISCSI_DBG_TCP(conn, "task deq [itt 0x%x imm %d unsol %d]\n", + task->itt, task->imm_count, task->unsol_r2t.data_length); err = conn->session->tt->init_pdu(task, 0, task->imm_count); if (err) @@ -965,7 +966,8 @@ static struct iscsi_r2t_info *iscsi_tcp_get_curr_r2t(struct iscsi_task *task) r2t = tcp_task->r2t; /* Continue with this R2T? */ if (r2t->data_length <= r2t->sent) { - debug_scsi(" done with r2t %p\n", r2t); + ISCSI_DBG_TCP(task->conn, + " done with r2t %p\n", r2t); __kfifo_put(tcp_task->r2tpool.queue, (void *)&tcp_task->r2t, sizeof(void *)); @@ -1019,7 +1021,7 @@ flush: r2t = iscsi_tcp_get_curr_r2t(task); if (r2t == NULL) { /* Waiting for more R2Ts to arrive. */ - debug_tcp("no R2Ts yet\n"); + ISCSI_DBG_TCP(conn, "no R2Ts yet\n"); return 0; } @@ -1028,9 +1030,9 @@ flush: return rc; iscsi_prep_data_out_pdu(task, r2t, (struct iscsi_data *) task->hdr); - debug_scsi("sol dout %p [dsn %d itt 0x%x doff %d dlen %d]\n", - r2t, r2t->datasn - 1, task->hdr->itt, - r2t->data_offset + r2t->sent, r2t->data_count); + ISCSI_DBG_TCP(conn, "sol dout %p [dsn %d itt 0x%x doff %d dlen %d]\n", + r2t, r2t->datasn - 1, task->hdr->itt, + r2t->data_offset + r2t->sent, r2t->data_count); rc = conn->session->tt->init_pdu(task, r2t->data_offset + r2t->sent, r2t->data_count); diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index b615eda361d..81cdcf46c47 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -1132,7 +1132,7 @@ lpfc_debugfs_dumpDataDif_release(struct inode *inode, struct file *file) } #undef lpfc_debugfs_op_disc_trc -static struct file_operations lpfc_debugfs_op_disc_trc = { +static const struct file_operations lpfc_debugfs_op_disc_trc = { .owner = THIS_MODULE, .open = lpfc_debugfs_disc_trc_open, .llseek = lpfc_debugfs_lseek, @@ -1141,7 +1141,7 @@ static struct file_operations lpfc_debugfs_op_disc_trc = { }; #undef lpfc_debugfs_op_nodelist -static struct file_operations lpfc_debugfs_op_nodelist = { +static const struct file_operations lpfc_debugfs_op_nodelist = { .owner = THIS_MODULE, .open = lpfc_debugfs_nodelist_open, .llseek = lpfc_debugfs_lseek, @@ -1150,7 +1150,7 @@ static struct file_operations lpfc_debugfs_op_nodelist = { }; #undef lpfc_debugfs_op_hbqinfo -static struct file_operations lpfc_debugfs_op_hbqinfo = { +static const struct file_operations lpfc_debugfs_op_hbqinfo = { .owner = THIS_MODULE, .open = lpfc_debugfs_hbqinfo_open, .llseek = lpfc_debugfs_lseek, @@ -1159,7 +1159,7 @@ static struct file_operations lpfc_debugfs_op_hbqinfo = { }; #undef lpfc_debugfs_op_dumpHBASlim -static struct file_operations lpfc_debugfs_op_dumpHBASlim = { +static const struct file_operations lpfc_debugfs_op_dumpHBASlim = { .owner = THIS_MODULE, .open = lpfc_debugfs_dumpHBASlim_open, .llseek = lpfc_debugfs_lseek, @@ -1168,7 +1168,7 @@ static struct file_operations lpfc_debugfs_op_dumpHBASlim = { }; #undef lpfc_debugfs_op_dumpHostSlim -static struct file_operations lpfc_debugfs_op_dumpHostSlim = { +static const struct file_operations lpfc_debugfs_op_dumpHostSlim = { .owner = THIS_MODULE, .open = lpfc_debugfs_dumpHostSlim_open, .llseek = lpfc_debugfs_lseek, @@ -1177,7 +1177,7 @@ static struct file_operations lpfc_debugfs_op_dumpHostSlim = { }; #undef lpfc_debugfs_op_dumpData -static struct file_operations lpfc_debugfs_op_dumpData = { +static const struct file_operations lpfc_debugfs_op_dumpData = { .owner = THIS_MODULE, .open = lpfc_debugfs_dumpData_open, .llseek = lpfc_debugfs_lseek, @@ -1187,7 +1187,7 @@ static struct file_operations lpfc_debugfs_op_dumpData = { }; #undef lpfc_debugfs_op_dumpDif -static struct file_operations lpfc_debugfs_op_dumpDif = { +static const struct file_operations lpfc_debugfs_op_dumpDif = { .owner = THIS_MODULE, .open = lpfc_debugfs_dumpDif_open, .llseek = lpfc_debugfs_lseek, @@ -1197,7 +1197,7 @@ static struct file_operations lpfc_debugfs_op_dumpDif = { }; #undef lpfc_debugfs_op_slow_ring_trc -static struct file_operations lpfc_debugfs_op_slow_ring_trc = { +static const struct file_operations lpfc_debugfs_op_slow_ring_trc = { .owner = THIS_MODULE, .open = lpfc_debugfs_slow_ring_trc_open, .llseek = lpfc_debugfs_lseek, diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index b103b6ed497..b1bd3fc7bae 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -1357,7 +1357,7 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, 0x10, 0x1); - cmd->result = (DRIVER_SENSE|SUGGEST_DIE) << 24 + cmd->result = DRIVER_SENSE << 24 | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION); phba->bg_guard_err_cnt++; printk(KERN_ERR "BLKGRD: guard_tag error\n"); @@ -1368,7 +1368,7 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, 0x10, 0x3); - cmd->result = (DRIVER_SENSE|SUGGEST_DIE) << 24 + cmd->result = DRIVER_SENSE << 24 | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION); phba->bg_reftag_err_cnt++; @@ -1380,7 +1380,7 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, 0x10, 0x2); - cmd->result = (DRIVER_SENSE|SUGGEST_DIE) << 24 + cmd->result = DRIVER_SENSE << 24 | ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION); phba->bg_apptag_err_cnt++; diff --git a/drivers/scsi/mpt2sas/Kconfig b/drivers/scsi/mpt2sas/Kconfig new file mode 100644 index 00000000000..4a86855c23b --- /dev/null +++ b/drivers/scsi/mpt2sas/Kconfig @@ -0,0 +1,66 @@ +# +# Kernel configuration file for the MPT2SAS +# +# This code is based on drivers/scsi/mpt2sas/Kconfig +# Copyright (C) 2007-2008 LSI Corporation +# (mailto:DL-MPTFusionLinux@lsi.com) + +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; either version 2 +# of the License, or (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# NO WARRANTY +# THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR +# CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT +# LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, +# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is +# solely responsible for determining the appropriateness of using and +# distributing the Program and assumes all risks associated with its +# exercise of rights under this Agreement, including but not limited to +# the risks and costs of program errors, damage to or loss of data, +# programs or equipment, and unavailability or interruption of operations. + +# DISCLAIMER OF LIABILITY +# NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY +# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +# DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND +# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +# TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE +# USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED +# HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, +# USA. + +config SCSI_MPT2SAS + tristate "LSI MPT Fusion SAS 2.0 Device Driver" + depends on PCI && SCSI + select SCSI_SAS_ATTRS + ---help--- + This driver supports PCI-Express SAS 6Gb/s Host Adapters. + +config SCSI_MPT2SAS_MAX_SGE + int "LSI MPT Fusion Max number of SG Entries (16 - 128)" + depends on PCI && SCSI && SCSI_MPT2SAS + default "128" + range 16 128 + ---help--- + This option allows you to specify the maximum number of scatter- + gather entries per I/O. The driver default is 128, which matches + SAFE_PHYS_SEGMENTS. However, it may decreased down to 16. + Decreasing this parameter will reduce memory requirements + on a per controller instance. + +config SCSI_MPT2SAS_LOGGING + bool "LSI MPT Fusion logging facility" + depends on PCI && SCSI && SCSI_MPT2SAS + ---help--- + This turns on a logging facility. diff --git a/drivers/scsi/mpt2sas/Makefile b/drivers/scsi/mpt2sas/Makefile new file mode 100644 index 00000000000..728f0475711 --- /dev/null +++ b/drivers/scsi/mpt2sas/Makefile @@ -0,0 +1,7 @@ +# mpt2sas makefile +obj-$(CONFIG_SCSI_MPT2SAS) += mpt2sas.o +mpt2sas-y += mpt2sas_base.o \ + mpt2sas_config.o \ + mpt2sas_scsih.o \ + mpt2sas_transport.o \ + mpt2sas_ctl.o diff --git a/drivers/scsi/mpt2sas/mpi/mpi2.h b/drivers/scsi/mpt2sas/mpi/mpi2.h new file mode 100644 index 00000000000..7bb2ece8b2e --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2.h @@ -0,0 +1,1067 @@ +/* + * Copyright (c) 2000-2009 LSI Corporation. + * + * + * Name: mpi2.h + * Title: MPI Message independent structures and definitions + * including System Interface Register Set and + * scatter/gather formats. + * Creation Date: June 21, 2006 + * + * mpi2.h Version: 02.00.11 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-04-07 02.00.01 Bumped MPI2_HEADER_VERSION_UNIT. + * 06-26-07 02.00.02 Bumped MPI2_HEADER_VERSION_UNIT. + * 08-31-07 02.00.03 Bumped MPI2_HEADER_VERSION_UNIT. + * Moved ReplyPostHostIndex register to offset 0x6C of the + * MPI2_SYSTEM_INTERFACE_REGS and modified the define for + * MPI2_REPLY_POST_HOST_INDEX_OFFSET. + * Added union of request descriptors. + * Added union of reply descriptors. + * 10-31-07 02.00.04 Bumped MPI2_HEADER_VERSION_UNIT. + * Added define for MPI2_VERSION_02_00. + * Fixed the size of the FunctionDependent5 field in the + * MPI2_DEFAULT_REPLY structure. + * 12-18-07 02.00.05 Bumped MPI2_HEADER_VERSION_UNIT. + * Removed the MPI-defined Fault Codes and extended the + * product specific codes up to 0xEFFF. + * Added a sixth key value for the WriteSequence register + * and changed the flush value to 0x0. + * Added message function codes for Diagnostic Buffer Post + * and Diagnsotic Release. + * New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED + * Moved MPI2_VERSION_UNION from mpi2_ioc.h. + * 02-29-08 02.00.06 Bumped MPI2_HEADER_VERSION_UNIT. + * 03-03-08 02.00.07 Bumped MPI2_HEADER_VERSION_UNIT. + * 05-21-08 02.00.08 Bumped MPI2_HEADER_VERSION_UNIT. + * Added #defines for marking a reply descriptor as unused. + * 06-27-08 02.00.09 Bumped MPI2_HEADER_VERSION_UNIT. + * 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT. + * Moved LUN field defines from mpi2_init.h. + * 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_H +#define MPI2_H + + +/***************************************************************************** +* +* MPI Version Definitions +* +*****************************************************************************/ + +#define MPI2_VERSION_MAJOR (0x02) +#define MPI2_VERSION_MINOR (0x00) +#define MPI2_VERSION_MAJOR_MASK (0xFF00) +#define MPI2_VERSION_MAJOR_SHIFT (8) +#define MPI2_VERSION_MINOR_MASK (0x00FF) +#define MPI2_VERSION_MINOR_SHIFT (0) +#define MPI2_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \ + MPI2_VERSION_MINOR) + +#define MPI2_VERSION_02_00 (0x0200) + +/* versioning for this MPI header set */ +#define MPI2_HEADER_VERSION_UNIT (0x0B) +#define MPI2_HEADER_VERSION_DEV (0x00) +#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00) +#define MPI2_HEADER_VERSION_UNIT_SHIFT (8) +#define MPI2_HEADER_VERSION_DEV_MASK (0x00FF) +#define MPI2_HEADER_VERSION_DEV_SHIFT (0) +#define MPI2_HEADER_VERSION ((MPI2_HEADER_VERSION_UNIT << 8) | MPI2_HEADER_VERSION_DEV) + + +/***************************************************************************** +* +* IOC State Definitions +* +*****************************************************************************/ + +#define MPI2_IOC_STATE_RESET (0x00000000) +#define MPI2_IOC_STATE_READY (0x10000000) +#define MPI2_IOC_STATE_OPERATIONAL (0x20000000) +#define MPI2_IOC_STATE_FAULT (0x40000000) + +#define MPI2_IOC_STATE_MASK (0xF0000000) +#define MPI2_IOC_STATE_SHIFT (28) + +/* Fault state range for prodcut specific codes */ +#define MPI2_FAULT_PRODUCT_SPECIFIC_MIN (0x0000) +#define MPI2_FAULT_PRODUCT_SPECIFIC_MAX (0xEFFF) + + +/***************************************************************************** +* +* System Interface Register Definitions +* +*****************************************************************************/ + +typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS +{ + U32 Doorbell; /* 0x00 */ + U32 WriteSequence; /* 0x04 */ + U32 HostDiagnostic; /* 0x08 */ + U32 Reserved1; /* 0x0C */ + U32 DiagRWData; /* 0x10 */ + U32 DiagRWAddressLow; /* 0x14 */ + U32 DiagRWAddressHigh; /* 0x18 */ + U32 Reserved2[5]; /* 0x1C */ + U32 HostInterruptStatus; /* 0x30 */ + U32 HostInterruptMask; /* 0x34 */ + U32 DCRData; /* 0x38 */ + U32 DCRAddress; /* 0x3C */ + U32 Reserved3[2]; /* 0x40 */ + U32 ReplyFreeHostIndex; /* 0x48 */ + U32 Reserved4[8]; /* 0x4C */ + U32 ReplyPostHostIndex; /* 0x6C */ + U32 Reserved5; /* 0x70 */ + U32 HCBSize; /* 0x74 */ + U32 HCBAddressLow; /* 0x78 */ + U32 HCBAddressHigh; /* 0x7C */ + U32 Reserved6[16]; /* 0x80 */ + U32 RequestDescriptorPostLow; /* 0xC0 */ + U32 RequestDescriptorPostHigh; /* 0xC4 */ + U32 Reserved7[14]; /* 0xC8 */ +} MPI2_SYSTEM_INTERFACE_REGS, MPI2_POINTER PTR_MPI2_SYSTEM_INTERFACE_REGS, + Mpi2SystemInterfaceRegs_t, MPI2_POINTER pMpi2SystemInterfaceRegs_t; + +/* + * Defines for working with the Doorbell register. + */ +#define MPI2_DOORBELL_OFFSET (0x00000000) + +/* IOC --> System values */ +#define MPI2_DOORBELL_USED (0x08000000) +#define MPI2_DOORBELL_WHO_INIT_MASK (0x07000000) +#define MPI2_DOORBELL_WHO_INIT_SHIFT (24) +#define MPI2_DOORBELL_FAULT_CODE_MASK (0x0000FFFF) +#define MPI2_DOORBELL_DATA_MASK (0x0000FFFF) + +/* System --> IOC values */ +#define MPI2_DOORBELL_FUNCTION_MASK (0xFF000000) +#define MPI2_DOORBELL_FUNCTION_SHIFT (24) +#define MPI2_DOORBELL_ADD_DWORDS_MASK (0x00FF0000) +#define MPI2_DOORBELL_ADD_DWORDS_SHIFT (16) + + +/* + * Defines for the WriteSequence register + */ +#define MPI2_WRITE_SEQUENCE_OFFSET (0x00000004) +#define MPI2_WRSEQ_KEY_VALUE_MASK (0x0000000F) +#define MPI2_WRSEQ_FLUSH_KEY_VALUE (0x0) +#define MPI2_WRSEQ_1ST_KEY_VALUE (0xF) +#define MPI2_WRSEQ_2ND_KEY_VALUE (0x4) +#define MPI2_WRSEQ_3RD_KEY_VALUE (0xB) +#define MPI2_WRSEQ_4TH_KEY_VALUE (0x2) +#define MPI2_WRSEQ_5TH_KEY_VALUE (0x7) +#define MPI2_WRSEQ_6TH_KEY_VALUE (0xD) + +/* + * Defines for the HostDiagnostic register + */ +#define MPI2_HOST_DIAGNOSTIC_OFFSET (0x00000008) + +#define MPI2_DIAG_BOOT_DEVICE_SELECT_MASK (0x00001800) +#define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT (0x00000000) +#define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW (0x00000800) + +#define MPI2_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400) +#define MPI2_DIAG_FORCE_HCB_ON_RESET (0x00000200) +#define MPI2_DIAG_HCB_MODE (0x00000100) +#define MPI2_DIAG_DIAG_WRITE_ENABLE (0x00000080) +#define MPI2_DIAG_FLASH_BAD_SIG (0x00000040) +#define MPI2_DIAG_RESET_HISTORY (0x00000020) +#define MPI2_DIAG_DIAG_RW_ENABLE (0x00000010) +#define MPI2_DIAG_RESET_ADAPTER (0x00000004) +#define MPI2_DIAG_HOLD_IOC_RESET (0x00000002) + +/* + * Offsets for DiagRWData and address + */ +#define MPI2_DIAG_RW_DATA_OFFSET (0x00000010) +#define MPI2_DIAG_RW_ADDRESS_LOW_OFFSET (0x00000014) +#define MPI2_DIAG_RW_ADDRESS_HIGH_OFFSET (0x00000018) + +/* + * Defines for the HostInterruptStatus register + */ +#define MPI2_HOST_INTERRUPT_STATUS_OFFSET (0x00000030) +#define MPI2_HIS_SYS2IOC_DB_STATUS (0x80000000) +#define MPI2_HIS_IOP_DOORBELL_STATUS MPI2_HIS_SYS2IOC_DB_STATUS +#define MPI2_HIS_RESET_IRQ_STATUS (0x40000000) +#define MPI2_HIS_REPLY_DESCRIPTOR_INTERRUPT (0x00000008) +#define MPI2_HIS_IOC2SYS_DB_STATUS (0x00000001) +#define MPI2_HIS_DOORBELL_INTERRUPT MPI2_HIS_IOC2SYS_DB_STATUS + +/* + * Defines for the HostInterruptMask register + */ +#define MPI2_HOST_INTERRUPT_MASK_OFFSET (0x00000034) +#define MPI2_HIM_RESET_IRQ_MASK (0x40000000) +#define MPI2_HIM_REPLY_INT_MASK (0x00000008) +#define MPI2_HIM_RIM MPI2_HIM_REPLY_INT_MASK +#define MPI2_HIM_IOC2SYS_DB_MASK (0x00000001) +#define MPI2_HIM_DIM MPI2_HIM_IOC2SYS_DB_MASK + +/* + * Offsets for DCRData and address + */ +#define MPI2_DCR_DATA_OFFSET (0x00000038) +#define MPI2_DCR_ADDRESS_OFFSET (0x0000003C) + +/* + * Offset for the Reply Free Queue + */ +#define MPI2_REPLY_FREE_HOST_INDEX_OFFSET (0x00000048) + +/* + * Offset for the Reply Descriptor Post Queue + */ +#define MPI2_REPLY_POST_HOST_INDEX_OFFSET (0x0000006C) + +/* + * Defines for the HCBSize and address + */ +#define MPI2_HCB_SIZE_OFFSET (0x00000074) +#define MPI2_HCB_SIZE_SIZE_MASK (0xFFFFF000) +#define MPI2_HCB_SIZE_HCB_ENABLE (0x00000001) + +#define MPI2_HCB_ADDRESS_LOW_OFFSET (0x00000078) +#define MPI2_HCB_ADDRESS_HIGH_OFFSET (0x0000007C) + +/* + * Offsets for the Request Queue + */ +#define MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET (0x000000C0) +#define MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET (0x000000C4) + + +/***************************************************************************** +* +* Message Descriptors +* +*****************************************************************************/ + +/* Request Descriptors */ + +/* Default Request Descriptor */ +typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR +{ + U8 RequestFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 SMID; /* 0x02 */ + U16 LMID; /* 0x04 */ + U16 DescriptorTypeDependent; /* 0x06 */ +} MPI2_DEFAULT_REQUEST_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_DEFAULT_REQUEST_DESCRIPTOR, + Mpi2DefaultRequestDescriptor_t, MPI2_POINTER pMpi2DefaultRequestDescriptor_t; + +/* defines for the RequestFlags field */ +#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK (0x0E) +#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO (0x00) +#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET (0x02) +#define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY (0x06) +#define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE (0x08) + +#define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01) + + +/* High Priority Request Descriptor */ +typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR +{ + U8 RequestFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 SMID; /* 0x02 */ + U16 LMID; /* 0x04 */ + U16 Reserved1; /* 0x06 */ +} MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR, + Mpi2HighPriorityRequestDescriptor_t, + MPI2_POINTER pMpi2HighPriorityRequestDescriptor_t; + + +/* SCSI IO Request Descriptor */ +typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR +{ + U8 RequestFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 SMID; /* 0x02 */ + U16 LMID; /* 0x04 */ + U16 DevHandle; /* 0x06 */ +} MPI2_SCSI_IO_REQUEST_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST_DESCRIPTOR, + Mpi2SCSIIORequestDescriptor_t, MPI2_POINTER pMpi2SCSIIORequestDescriptor_t; + + +/* SCSI Target Request Descriptor */ +typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR +{ + U8 RequestFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 SMID; /* 0x02 */ + U16 LMID; /* 0x04 */ + U16 IoIndex; /* 0x06 */ +} MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR, + Mpi2SCSITargetRequestDescriptor_t, + MPI2_POINTER pMpi2SCSITargetRequestDescriptor_t; + +/* union of Request Descriptors */ +typedef union _MPI2_REQUEST_DESCRIPTOR_UNION +{ + MPI2_DEFAULT_REQUEST_DESCRIPTOR Default; + MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR HighPriority; + MPI2_SCSI_IO_REQUEST_DESCRIPTOR SCSIIO; + MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget; + U64 Words; +} MPI2_REQUEST_DESCRIPTOR_UNION, MPI2_POINTER PTR_MPI2_REQUEST_DESCRIPTOR_UNION, + Mpi2RequestDescriptorUnion_t, MPI2_POINTER pMpi2RequestDescriptorUnion_t; + + +/* Reply Descriptors */ + +/* Default Reply Descriptor */ +typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR +{ + U8 ReplyFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 DescriptorTypeDependent1; /* 0x02 */ + U32 DescriptorTypeDependent2; /* 0x04 */ +} MPI2_DEFAULT_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_DEFAULT_REPLY_DESCRIPTOR, + Mpi2DefaultReplyDescriptor_t, MPI2_POINTER pMpi2DefaultReplyDescriptor_t; + +/* defines for the ReplyFlags field */ +#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK (0x0F) +#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00) +#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY (0x01) +#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS (0x02) +#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03) +#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F) + +/* values for marking a reply descriptor as unused */ +#define MPI2_RPY_DESCRIPT_UNUSED_WORD0_MARK (0xFFFFFFFF) +#define MPI2_RPY_DESCRIPT_UNUSED_WORD1_MARK (0xFFFFFFFF) + +/* Address Reply Descriptor */ +typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR +{ + U8 ReplyFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 SMID; /* 0x02 */ + U32 ReplyFrameAddress; /* 0x04 */ +} MPI2_ADDRESS_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_ADDRESS_REPLY_DESCRIPTOR, + Mpi2AddressReplyDescriptor_t, MPI2_POINTER pMpi2AddressReplyDescriptor_t; + +#define MPI2_ADDRESS_REPLY_SMID_INVALID (0x00) + + +/* SCSI IO Success Reply Descriptor */ +typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR +{ + U8 ReplyFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 SMID; /* 0x02 */ + U16 TaskTag; /* 0x04 */ + U16 DevHandle; /* 0x06 */ +} MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR, + Mpi2SCSIIOSuccessReplyDescriptor_t, + MPI2_POINTER pMpi2SCSIIOSuccessReplyDescriptor_t; + + +/* TargetAssist Success Reply Descriptor */ +typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR +{ + U8 ReplyFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 SMID; /* 0x02 */ + U8 SequenceNumber; /* 0x04 */ + U8 Reserved1; /* 0x05 */ + U16 IoIndex; /* 0x06 */ +} MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR, + Mpi2TargetAssistSuccessReplyDescriptor_t, + MPI2_POINTER pMpi2TargetAssistSuccessReplyDescriptor_t; + + +/* Target Command Buffer Reply Descriptor */ +typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR +{ + U8 ReplyFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U8 VP_ID; /* 0x02 */ + U8 Flags; /* 0x03 */ + U16 InitiatorDevHandle; /* 0x04 */ + U16 IoIndex; /* 0x06 */ +} MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR, + Mpi2TargetCommandBufferReplyDescriptor_t, + MPI2_POINTER pMpi2TargetCommandBufferReplyDescriptor_t; + +/* defines for Flags field */ +#define MPI2_RPY_DESCRIPT_TCB_FLAGS_PHYNUM_MASK (0x3F) + + +/* union of Reply Descriptors */ +typedef union _MPI2_REPLY_DESCRIPTORS_UNION +{ + MPI2_DEFAULT_REPLY_DESCRIPTOR Default; + MPI2_ADDRESS_REPLY_DESCRIPTOR AddressReply; + MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR SCSIIOSuccess; + MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess; + MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer; + U64 Words; +} MPI2_REPLY_DESCRIPTORS_UNION, MPI2_POINTER PTR_MPI2_REPLY_DESCRIPTORS_UNION, + Mpi2ReplyDescriptorsUnion_t, MPI2_POINTER pMpi2ReplyDescriptorsUnion_t; + + + +/***************************************************************************** +* +* Message Functions +* 0x80 -> 0x8F reserved for private message use per product +* +* +*****************************************************************************/ + +#define MPI2_FUNCTION_SCSI_IO_REQUEST (0x00) /* SCSI IO */ +#define MPI2_FUNCTION_SCSI_TASK_MGMT (0x01) /* SCSI Task Management */ +#define MPI2_FUNCTION_IOC_INIT (0x02) /* IOC Init */ +#define MPI2_FUNCTION_IOC_FACTS (0x03) /* IOC Facts */ +#define MPI2_FUNCTION_CONFIG (0x04) /* Configuration */ +#define MPI2_FUNCTION_PORT_FACTS (0x05) /* Port Facts */ +#define MPI2_FUNCTION_PORT_ENABLE (0x06) /* Port Enable */ +#define MPI2_FUNCTION_EVENT_NOTIFICATION (0x07) /* Event Notification */ +#define MPI2_FUNCTION_EVENT_ACK (0x08) /* Event Acknowledge */ +#define MPI2_FUNCTION_FW_DOWNLOAD (0x09) /* FW Download */ +#define MPI2_FUNCTION_TARGET_ASSIST (0x0B) /* Target Assist */ +#define MPI2_FUNCTION_TARGET_STATUS_SEND (0x0C) /* Target Status Send */ +#define MPI2_FUNCTION_TARGET_MODE_ABORT (0x0D) /* Target Mode Abort */ +#define MPI2_FUNCTION_FW_UPLOAD (0x12) /* FW Upload */ +#define MPI2_FUNCTION_RAID_ACTION (0x15) /* RAID Action */ +#define MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH (0x16) /* SCSI IO RAID Passthrough */ +#define MPI2_FUNCTION_TOOLBOX (0x17) /* Toolbox */ +#define MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR (0x18) /* SCSI Enclosure Processor */ +#define MPI2_FUNCTION_SMP_PASSTHROUGH (0x1A) /* SMP Passthrough */ +#define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B) /* SAS IO Unit Control */ +#define MPI2_FUNCTION_SATA_PASSTHROUGH (0x1C) /* SATA Passthrough */ +#define MPI2_FUNCTION_DIAG_BUFFER_POST (0x1D) /* Diagnostic Buffer Post */ +#define MPI2_FUNCTION_DIAG_RELEASE (0x1E) /* Diagnostic Release */ +#define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24) /* Target Command Buffer Post Base */ +#define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25) /* Target Command Buffer Post List */ + + + +/* Doorbell functions */ +#define MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET (0x40) +/* #define MPI2_FUNCTION_IO_UNIT_RESET (0x41) */ +#define MPI2_FUNCTION_HANDSHAKE (0x42) + + +/***************************************************************************** +* +* IOC Status Values +* +*****************************************************************************/ + +/* mask for IOCStatus status value */ +#define MPI2_IOCSTATUS_MASK (0x7FFF) + +/**************************************************************************** +* Common IOCStatus values for all replies +****************************************************************************/ + +#define MPI2_IOCSTATUS_SUCCESS (0x0000) +#define MPI2_IOCSTATUS_INVALID_FUNCTION (0x0001) +#define MPI2_IOCSTATUS_BUSY (0x0002) +#define MPI2_IOCSTATUS_INVALID_SGL (0x0003) +#define MPI2_IOCSTATUS_INTERNAL_ERROR (0x0004) +#define MPI2_IOCSTATUS_INVALID_VPID (0x0005) +#define MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006) +#define MPI2_IOCSTATUS_INVALID_FIELD (0x0007) +#define MPI2_IOCSTATUS_INVALID_STATE (0x0008) +#define MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED (0x0009) + +/**************************************************************************** +* Config IOCStatus values +****************************************************************************/ + +#define MPI2_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020) +#define MPI2_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021) +#define MPI2_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022) +#define MPI2_IOCSTATUS_CONFIG_INVALID_DATA (0x0023) +#define MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024) +#define MPI2_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025) + +/**************************************************************************** +* SCSI IO Reply +****************************************************************************/ + +#define MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040) +#define MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE (0x0042) +#define MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043) +#define MPI2_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044) +#define MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045) +#define MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046) +#define MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047) +#define MPI2_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048) +#define MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049) +#define MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004A) +#define MPI2_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B) +#define MPI2_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C) + +/**************************************************************************** +* For use by SCSI Initiator and SCSI Target end-to-end data protection +****************************************************************************/ + +#define MPI2_IOCSTATUS_EEDP_GUARD_ERROR (0x004D) +#define MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR (0x004E) +#define MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F) + +/**************************************************************************** +* SCSI Target values +****************************************************************************/ + +#define MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062) +#define MPI2_IOCSTATUS_TARGET_ABORTED (0x0063) +#define MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064) +#define MPI2_IOCSTATUS_TARGET_NO_CONNECTION (0x0065) +#define MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A) +#define MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006D) +#define MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E) +#define MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006F) +#define MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070) +#define MPI2_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071) + +/**************************************************************************** +* Serial Attached SCSI values +****************************************************************************/ + +#define MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090) +#define MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN (0x0091) + +/**************************************************************************** +* Diagnostic Buffer Post / Diagnostic Release values +****************************************************************************/ + +#define MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00A0) + + +/**************************************************************************** +* IOCStatus flag to indicate that log info is available +****************************************************************************/ + +#define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000) + +/**************************************************************************** +* IOCLogInfo Types +****************************************************************************/ + +#define MPI2_IOCLOGINFO_TYPE_MASK (0xF0000000) +#define MPI2_IOCLOGINFO_TYPE_SHIFT (28) +#define MPI2_IOCLOGINFO_TYPE_NONE (0x0) +#define MPI2_IOCLOGINFO_TYPE_SCSI (0x1) +#define MPI2_IOCLOGINFO_TYPE_FC (0x2) +#define MPI2_IOCLOGINFO_TYPE_SAS (0x3) +#define MPI2_IOCLOGINFO_TYPE_ISCSI (0x4) +#define MPI2_IOCLOGINFO_LOG_DATA_MASK (0x0FFFFFFF) + + +/***************************************************************************** +* +* Standard Message Structures +* +*****************************************************************************/ + +/**************************************************************************** +* Request Message Header for all request messages +****************************************************************************/ + +typedef struct _MPI2_REQUEST_HEADER +{ + U16 FunctionDependent1; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 FunctionDependent2; /* 0x04 */ + U8 FunctionDependent3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ +} MPI2_REQUEST_HEADER, MPI2_POINTER PTR_MPI2_REQUEST_HEADER, + MPI2RequestHeader_t, MPI2_POINTER pMPI2RequestHeader_t; + + +/**************************************************************************** +* Default Reply +****************************************************************************/ + +typedef struct _MPI2_DEFAULT_REPLY +{ + U16 FunctionDependent1; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 FunctionDependent2; /* 0x04 */ + U8 FunctionDependent3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U16 FunctionDependent5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_DEFAULT_REPLY, MPI2_POINTER PTR_MPI2_DEFAULT_REPLY, + MPI2DefaultReply_t, MPI2_POINTER pMPI2DefaultReply_t; + + +/* common version structure/union used in messages and configuration pages */ + +typedef struct _MPI2_VERSION_STRUCT +{ + U8 Dev; /* 0x00 */ + U8 Unit; /* 0x01 */ + U8 Minor; /* 0x02 */ + U8 Major; /* 0x03 */ +} MPI2_VERSION_STRUCT; + +typedef union _MPI2_VERSION_UNION +{ + MPI2_VERSION_STRUCT Struct; + U32 Word; +} MPI2_VERSION_UNION; + + +/* LUN field defines, common to many structures */ +#define MPI2_LUN_FIRST_LEVEL_ADDRESSING (0x0000FFFF) +#define MPI2_LUN_SECOND_LEVEL_ADDRESSING (0xFFFF0000) +#define MPI2_LUN_THIRD_LEVEL_ADDRESSING (0x0000FFFF) +#define MPI2_LUN_FOURTH_LEVEL_ADDRESSING (0xFFFF0000) +#define MPI2_LUN_LEVEL_1_WORD (0xFF00) +#define MPI2_LUN_LEVEL_1_DWORD (0x0000FF00) + + +/***************************************************************************** +* +* Fusion-MPT MPI Scatter Gather Elements +* +*****************************************************************************/ + +/**************************************************************************** +* MPI Simple Element structures +****************************************************************************/ + +typedef struct _MPI2_SGE_SIMPLE32 +{ + U32 FlagsLength; + U32 Address; +} MPI2_SGE_SIMPLE32, MPI2_POINTER PTR_MPI2_SGE_SIMPLE32, + Mpi2SGESimple32_t, MPI2_POINTER pMpi2SGESimple32_t; + +typedef struct _MPI2_SGE_SIMPLE64 +{ + U32 FlagsLength; + U64 Address; +} MPI2_SGE_SIMPLE64, MPI2_POINTER PTR_MPI2_SGE_SIMPLE64, + Mpi2SGESimple64_t, MPI2_POINTER pMpi2SGESimple64_t; + +typedef struct _MPI2_SGE_SIMPLE_UNION +{ + U32 FlagsLength; + union + { + U32 Address32; + U64 Address64; + } u; +} MPI2_SGE_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_SGE_SIMPLE_UNION, + Mpi2SGESimpleUnion_t, MPI2_POINTER pMpi2SGESimpleUnion_t; + + +/**************************************************************************** +* MPI Chain Element structures +****************************************************************************/ + +typedef struct _MPI2_SGE_CHAIN32 +{ + U16 Length; + U8 NextChainOffset; + U8 Flags; + U32 Address; +} MPI2_SGE_CHAIN32, MPI2_POINTER PTR_MPI2_SGE_CHAIN32, + Mpi2SGEChain32_t, MPI2_POINTER pMpi2SGEChain32_t; + +typedef struct _MPI2_SGE_CHAIN64 +{ + U16 Length; + U8 NextChainOffset; + U8 Flags; + U64 Address; +} MPI2_SGE_CHAIN64, MPI2_POINTER PTR_MPI2_SGE_CHAIN64, + Mpi2SGEChain64_t, MPI2_POINTER pMpi2SGEChain64_t; + +typedef struct _MPI2_SGE_CHAIN_UNION +{ + U16 Length; + U8 NextChainOffset; + U8 Flags; + union + { + U32 Address32; + U64 Address64; + } u; +} MPI2_SGE_CHAIN_UNION, MPI2_POINTER PTR_MPI2_SGE_CHAIN_UNION, + Mpi2SGEChainUnion_t, MPI2_POINTER pMpi2SGEChainUnion_t; + + +/**************************************************************************** +* MPI Transaction Context Element structures +****************************************************************************/ + +typedef struct _MPI2_SGE_TRANSACTION32 +{ + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[1]; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION32, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION32, + Mpi2SGETransaction32_t, MPI2_POINTER pMpi2SGETransaction32_t; + +typedef struct _MPI2_SGE_TRANSACTION64 +{ + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[2]; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION64, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION64, + Mpi2SGETransaction64_t, MPI2_POINTER pMpi2SGETransaction64_t; + +typedef struct _MPI2_SGE_TRANSACTION96 +{ + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[3]; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION96, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION96, + Mpi2SGETransaction96_t, MPI2_POINTER pMpi2SGETransaction96_t; + +typedef struct _MPI2_SGE_TRANSACTION128 +{ + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[4]; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION128, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION128, + Mpi2SGETransaction_t128, MPI2_POINTER pMpi2SGETransaction_t128; + +typedef struct _MPI2_SGE_TRANSACTION_UNION +{ + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + union + { + U32 TransactionContext32[1]; + U32 TransactionContext64[2]; + U32 TransactionContext96[3]; + U32 TransactionContext128[4]; + } u; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION_UNION, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION_UNION, + Mpi2SGETransactionUnion_t, MPI2_POINTER pMpi2SGETransactionUnion_t; + + +/**************************************************************************** +* MPI SGE union for IO SGL's +****************************************************************************/ + +typedef struct _MPI2_MPI_SGE_IO_UNION +{ + union + { + MPI2_SGE_SIMPLE_UNION Simple; + MPI2_SGE_CHAIN_UNION Chain; + } u; +} MPI2_MPI_SGE_IO_UNION, MPI2_POINTER PTR_MPI2_MPI_SGE_IO_UNION, + Mpi2MpiSGEIOUnion_t, MPI2_POINTER pMpi2MpiSGEIOUnion_t; + + +/**************************************************************************** +* MPI SGE union for SGL's with Simple and Transaction elements +****************************************************************************/ + +typedef struct _MPI2_SGE_TRANS_SIMPLE_UNION +{ + union + { + MPI2_SGE_SIMPLE_UNION Simple; + MPI2_SGE_TRANSACTION_UNION Transaction; + } u; +} MPI2_SGE_TRANS_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_SGE_TRANS_SIMPLE_UNION, + Mpi2SGETransSimpleUnion_t, MPI2_POINTER pMpi2SGETransSimpleUnion_t; + + +/**************************************************************************** +* All MPI SGE types union +****************************************************************************/ + +typedef struct _MPI2_MPI_SGE_UNION +{ + union + { + MPI2_SGE_SIMPLE_UNION Simple; + MPI2_SGE_CHAIN_UNION Chain; + MPI2_SGE_TRANSACTION_UNION Transaction; + } u; +} MPI2_MPI_SGE_UNION, MPI2_POINTER PTR_MPI2_MPI_SGE_UNION, + Mpi2MpiSgeUnion_t, MPI2_POINTER pMpi2MpiSgeUnion_t; + + +/**************************************************************************** +* MPI SGE field definition and masks +****************************************************************************/ + +/* Flags field bit definitions */ + +#define MPI2_SGE_FLAGS_LAST_ELEMENT (0x80) +#define MPI2_SGE_FLAGS_END_OF_BUFFER (0x40) +#define MPI2_SGE_FLAGS_ELEMENT_TYPE_MASK (0x30) +#define MPI2_SGE_FLAGS_LOCAL_ADDRESS (0x08) +#define MPI2_SGE_FLAGS_DIRECTION (0x04) +#define MPI2_SGE_FLAGS_ADDRESS_SIZE (0x02) +#define MPI2_SGE_FLAGS_END_OF_LIST (0x01) + +#define MPI2_SGE_FLAGS_SHIFT (24) + +#define MPI2_SGE_LENGTH_MASK (0x00FFFFFF) +#define MPI2_SGE_CHAIN_LENGTH_MASK (0x0000FFFF) + +/* Element Type */ + +#define MPI2_SGE_FLAGS_TRANSACTION_ELEMENT (0x00) +#define MPI2_SGE_FLAGS_SIMPLE_ELEMENT (0x10) +#define MPI2_SGE_FLAGS_CHAIN_ELEMENT (0x30) +#define MPI2_SGE_FLAGS_ELEMENT_MASK (0x30) + +/* Address location */ + +#define MPI2_SGE_FLAGS_SYSTEM_ADDRESS (0x00) + +/* Direction */ + +#define MPI2_SGE_FLAGS_IOC_TO_HOST (0x00) +#define MPI2_SGE_FLAGS_HOST_TO_IOC (0x04) + +/* Address Size */ + +#define MPI2_SGE_FLAGS_32_BIT_ADDRESSING (0x00) +#define MPI2_SGE_FLAGS_64_BIT_ADDRESSING (0x02) + +/* Context Size */ + +#define MPI2_SGE_FLAGS_32_BIT_CONTEXT (0x00) +#define MPI2_SGE_FLAGS_64_BIT_CONTEXT (0x02) +#define MPI2_SGE_FLAGS_96_BIT_CONTEXT (0x04) +#define MPI2_SGE_FLAGS_128_BIT_CONTEXT (0x06) + +#define MPI2_SGE_CHAIN_OFFSET_MASK (0x00FF0000) +#define MPI2_SGE_CHAIN_OFFSET_SHIFT (16) + +/**************************************************************************** +* MPI SGE operation Macros +****************************************************************************/ + +/* SIMPLE FlagsLength manipulations... */ +#define MPI2_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_SGE_FLAGS_SHIFT) +#define MPI2_SGE_GET_FLAGS(f) (((f) & ~MPI2_SGE_LENGTH_MASK) >> MPI2_SGE_FLAGS_SHIFT) +#define MPI2_SGE_LENGTH(f) ((f) & MPI2_SGE_LENGTH_MASK) +#define MPI2_SGE_CHAIN_LENGTH(f) ((f) & MPI2_SGE_CHAIN_LENGTH_MASK) + +#define MPI2_SGE_SET_FLAGS_LENGTH(f,l) (MPI2_SGE_SET_FLAGS(f) | MPI2_SGE_LENGTH(l)) + +#define MPI2_pSGE_GET_FLAGS(psg) MPI2_SGE_GET_FLAGS((psg)->FlagsLength) +#define MPI2_pSGE_GET_LENGTH(psg) MPI2_SGE_LENGTH((psg)->FlagsLength) +#define MPI2_pSGE_SET_FLAGS_LENGTH(psg,f,l) (psg)->FlagsLength = MPI2_SGE_SET_FLAGS_LENGTH(f,l) + +/* CAUTION - The following are READ-MODIFY-WRITE! */ +#define MPI2_pSGE_SET_FLAGS(psg,f) (psg)->FlagsLength |= MPI2_SGE_SET_FLAGS(f) +#define MPI2_pSGE_SET_LENGTH(psg,l) (psg)->FlagsLength |= MPI2_SGE_LENGTH(l) + +#define MPI2_GET_CHAIN_OFFSET(x) ((x & MPI2_SGE_CHAIN_OFFSET_MASK) >> MPI2_SGE_CHAIN_OFFSET_SHIFT) + + +/***************************************************************************** +* +* Fusion-MPT IEEE Scatter Gather Elements +* +*****************************************************************************/ + +/**************************************************************************** +* IEEE Simple Element structures +****************************************************************************/ + +typedef struct _MPI2_IEEE_SGE_SIMPLE32 +{ + U32 Address; + U32 FlagsLength; +} MPI2_IEEE_SGE_SIMPLE32, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE32, + Mpi2IeeeSgeSimple32_t, MPI2_POINTER pMpi2IeeeSgeSimple32_t; + +typedef struct _MPI2_IEEE_SGE_SIMPLE64 +{ + U64 Address; + U32 Length; + U16 Reserved1; + U8 Reserved2; + U8 Flags; +} MPI2_IEEE_SGE_SIMPLE64, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE64, + Mpi2IeeeSgeSimple64_t, MPI2_POINTER pMpi2IeeeSgeSimple64_t; + +typedef union _MPI2_IEEE_SGE_SIMPLE_UNION +{ + MPI2_IEEE_SGE_SIMPLE32 Simple32; + MPI2_IEEE_SGE_SIMPLE64 Simple64; +} MPI2_IEEE_SGE_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE_UNION, + Mpi2IeeeSgeSimpleUnion_t, MPI2_POINTER pMpi2IeeeSgeSimpleUnion_t; + + +/**************************************************************************** +* IEEE Chain Element structures +****************************************************************************/ + +typedef MPI2_IEEE_SGE_SIMPLE32 MPI2_IEEE_SGE_CHAIN32; + +typedef MPI2_IEEE_SGE_SIMPLE64 MPI2_IEEE_SGE_CHAIN64; + +typedef union _MPI2_IEEE_SGE_CHAIN_UNION +{ + MPI2_IEEE_SGE_CHAIN32 Chain32; + MPI2_IEEE_SGE_CHAIN64 Chain64; +} MPI2_IEEE_SGE_CHAIN_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_CHAIN_UNION, + Mpi2IeeeSgeChainUnion_t, MPI2_POINTER pMpi2IeeeSgeChainUnion_t; + + +/**************************************************************************** +* All IEEE SGE types union +****************************************************************************/ + +typedef struct _MPI2_IEEE_SGE_UNION +{ + union + { + MPI2_IEEE_SGE_SIMPLE_UNION Simple; + MPI2_IEEE_SGE_CHAIN_UNION Chain; + } u; +} MPI2_IEEE_SGE_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_UNION, + Mpi2IeeeSgeUnion_t, MPI2_POINTER pMpi2IeeeSgeUnion_t; + + +/**************************************************************************** +* IEEE SGE field definitions and masks +****************************************************************************/ + +/* Flags field bit definitions */ + +#define MPI2_IEEE_SGE_FLAGS_ELEMENT_TYPE_MASK (0x80) + +#define MPI2_IEEE32_SGE_FLAGS_SHIFT (24) + +#define MPI2_IEEE32_SGE_LENGTH_MASK (0x00FFFFFF) + +/* Element Type */ + +#define MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT (0x00) +#define MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT (0x80) + +/* Data Location Address Space */ + +#define MPI2_IEEE_SGE_FLAGS_ADDR_MASK (0x03) +#define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR (0x00) +#define MPI2_IEEE_SGE_FLAGS_IOCDDR_ADDR (0x01) +#define MPI2_IEEE_SGE_FLAGS_IOCPLB_ADDR (0x02) +#define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR (0x03) + + +/**************************************************************************** +* IEEE SGE operation Macros +****************************************************************************/ + +/* SIMPLE FlagsLength manipulations... */ +#define MPI2_IEEE32_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_IEEE32_SGE_FLAGS_SHIFT) +#define MPI2_IEEE32_SGE_GET_FLAGS(f) (((f) & ~MPI2_IEEE32_SGE_LENGTH_MASK) >> MPI2_IEEE32_SGE_FLAGS_SHIFT) +#define MPI2_IEEE32_SGE_LENGTH(f) ((f) & MPI2_IEEE32_SGE_LENGTH_MASK) + +#define MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f, l) (MPI2_IEEE32_SGE_SET_FLAGS(f) | MPI2_IEEE32_SGE_LENGTH(l)) + +#define MPI2_IEEE32_pSGE_GET_FLAGS(psg) MPI2_IEEE32_SGE_GET_FLAGS((psg)->FlagsLength) +#define MPI2_IEEE32_pSGE_GET_LENGTH(psg) MPI2_IEEE32_SGE_LENGTH((psg)->FlagsLength) +#define MPI2_IEEE32_pSGE_SET_FLAGS_LENGTH(psg,f,l) (psg)->FlagsLength = MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f,l) + +/* CAUTION - The following are READ-MODIFY-WRITE! */ +#define MPI2_IEEE32_pSGE_SET_FLAGS(psg,f) (psg)->FlagsLength |= MPI2_IEEE32_SGE_SET_FLAGS(f) +#define MPI2_IEEE32_pSGE_SET_LENGTH(psg,l) (psg)->FlagsLength |= MPI2_IEEE32_SGE_LENGTH(l) + + + + +/***************************************************************************** +* +* Fusion-MPT MPI/IEEE Scatter Gather Unions +* +*****************************************************************************/ + +typedef union _MPI2_SIMPLE_SGE_UNION +{ + MPI2_SGE_SIMPLE_UNION MpiSimple; + MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple; +} MPI2_SIMPLE_SGE_UNION, MPI2_POINTER PTR_MPI2_SIMPLE_SGE_UNION, + Mpi2SimpleSgeUntion_t, MPI2_POINTER pMpi2SimpleSgeUntion_t; + + +typedef union _MPI2_SGE_IO_UNION +{ + MPI2_SGE_SIMPLE_UNION MpiSimple; + MPI2_SGE_CHAIN_UNION MpiChain; + MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple; + MPI2_IEEE_SGE_CHAIN_UNION IeeeChain; +} MPI2_SGE_IO_UNION, MPI2_POINTER PTR_MPI2_SGE_IO_UNION, + Mpi2SGEIOUnion_t, MPI2_POINTER pMpi2SGEIOUnion_t; + + +/**************************************************************************** +* +* Values for SGLFlags field, used in many request messages with an SGL +* +****************************************************************************/ + +/* values for MPI SGL Data Location Address Space subfield */ +#define MPI2_SGLFLAGS_ADDRESS_SPACE_MASK (0x0C) +#define MPI2_SGLFLAGS_SYSTEM_ADDRESS_SPACE (0x00) +#define MPI2_SGLFLAGS_IOCDDR_ADDRESS_SPACE (0x04) +#define MPI2_SGLFLAGS_IOCPLB_ADDRESS_SPACE (0x08) +#define MPI2_SGLFLAGS_IOCPLBNTA_ADDRESS_SPACE (0x0C) +/* values for SGL Type subfield */ +#define MPI2_SGLFLAGS_SGL_TYPE_MASK (0x03) +#define MPI2_SGLFLAGS_SGL_TYPE_MPI (0x00) +#define MPI2_SGLFLAGS_SGL_TYPE_IEEE32 (0x01) +#define MPI2_SGLFLAGS_SGL_TYPE_IEEE64 (0x02) + + +#endif + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h new file mode 100644 index 00000000000..2f27cf6d6c6 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h @@ -0,0 +1,2151 @@ +/* + * Copyright (c) 2000-2009 LSI Corporation. + * + * + * Name: mpi2_cnfg.h + * Title: MPI Configuration messages and pages + * Creation Date: November 10, 2006 + * + * mpi2_cnfg.h Version: 02.00.10 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags. + * Added Manufacturing Page 11. + * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE + * define. + * 06-26-07 02.00.02 Adding generic structure for product-specific + * Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS. + * Rework of BIOS Page 2 configuration page. + * Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the + * forms. + * Added configuration pages IOC Page 8 and Driver + * Persistent Mapping Page 0. + * 08-31-07 02.00.03 Modified configuration pages dealing with Integrated + * RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1, + * RAID Physical Disk Pages 0 and 1, RAID Configuration + * Page 0). + * Added new value for AccessStatus field of SAS Device + * Page 0 (_SATA_NEEDS_INITIALIZATION). + * 10-31-07 02.00.04 Added missing SEPDevHandle field to + * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. + * 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for + * NVDATA. + * Modified IOC Page 7 to use masks and added field for + * SASBroadcastPrimitiveMasks. + * Added MPI2_CONFIG_PAGE_BIOS_4. + * Added MPI2_CONFIG_PAGE_LOG_0. + * 02-29-08 02.00.06 Modified various names to make them 32-character unique. + * Added SAS Device IDs. + * Updated Integrated RAID configuration pages including + * Manufacturing Page 4, IOC Page 6, and RAID Configuration + * Page 0. + * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA. + * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION. + * Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING. + * Added missing MaxNumRoutedSasAddresses field to + * MPI2_CONFIG_PAGE_EXPANDER_0. + * Added SAS Port Page 0. + * Modified structure layout for + * MPI2_CONFIG_PAGE_DRIVER_MAPPING_0. + * 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use + * MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array. + * 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF + * to 0x000000FF. + * Added two new values for the Physical Disk Coercion Size + * bits in the Flags field of Manufacturing Page 4. + * Added product-specific Manufacturing pages 16 to 31. + * Modified Flags bits for controlling write cache on SATA + * drives in IO Unit Page 1. + * Added new bit to AdditionalControlFlags of SAS IO Unit + * Page 1 to control Invalid Topology Correction. + * Added additional defines for RAID Volume Page 0 + * VolumeStatusFlags field. + * Modified meaning of RAID Volume Page 0 VolumeSettings + * define for auto-configure of hot-swap drives. + * Added SupportedPhysDisks field to RAID Volume Page 1 and + * added related defines. + * Added PhysDiskAttributes field (and related defines) to + * RAID Physical Disk Page 0. + * Added MPI2_SAS_PHYINFO_PHY_VACANT define. + * Added three new DiscoveryStatus bits for SAS IO Unit + * Page 0 and SAS Expander Page 0. + * Removed multiplexing information from SAS IO Unit pages. + * Added BootDeviceWaitTime field to SAS IO Unit Page 4. + * Removed Zone Address Resolved bit from PhyInfo and from + * Expander Page 0 Flags field. + * Added two new AccessStatus values to SAS Device Page 0 + * for indicating routing problems. Added 3 reserved words + * to this page. + * 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3. + * Inserted missing reserved field into structure for IOC + * Page 6. + * Added more pending task bits to RAID Volume Page 0 + * VolumeStatusFlags defines. + * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define. + * Added a new DiscoveryStatus bit for SAS IO Unit Page 0 + * and SAS Expander Page 0 to flag a downstream initiator + * when in simplified routing mode. + * Removed SATA Init Failure defines for DiscoveryStatus + * fields of SAS IO Unit Page 0 and SAS Expander Page 0. + * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define. + * Added PortGroups, DmaGroup, and ControlGroup fields to + * SAS Device Page 0. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_CNFG_H +#define MPI2_CNFG_H + +/***************************************************************************** +* Configuration Page Header and defines +*****************************************************************************/ + +/* Config Page Header */ +typedef struct _MPI2_CONFIG_PAGE_HEADER +{ + U8 PageVersion; /* 0x00 */ + U8 PageLength; /* 0x01 */ + U8 PageNumber; /* 0x02 */ + U8 PageType; /* 0x03 */ +} MPI2_CONFIG_PAGE_HEADER, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_HEADER, + Mpi2ConfigPageHeader_t, MPI2_POINTER pMpi2ConfigPageHeader_t; + +typedef union _MPI2_CONFIG_PAGE_HEADER_UNION +{ + MPI2_CONFIG_PAGE_HEADER Struct; + U8 Bytes[4]; + U16 Word16[2]; + U32 Word32; +} MPI2_CONFIG_PAGE_HEADER_UNION, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_HEADER_UNION, + Mpi2ConfigPageHeaderUnion, MPI2_POINTER pMpi2ConfigPageHeaderUnion; + +/* Extended Config Page Header */ +typedef struct _MPI2_CONFIG_EXTENDED_PAGE_HEADER +{ + U8 PageVersion; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 PageNumber; /* 0x02 */ + U8 PageType; /* 0x03 */ + U16 ExtPageLength; /* 0x04 */ + U8 ExtPageType; /* 0x06 */ + U8 Reserved2; /* 0x07 */ +} MPI2_CONFIG_EXTENDED_PAGE_HEADER, + MPI2_POINTER PTR_MPI2_CONFIG_EXTENDED_PAGE_HEADER, + Mpi2ConfigExtendedPageHeader_t, MPI2_POINTER pMpi2ConfigExtendedPageHeader_t; + +typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION +{ + MPI2_CONFIG_PAGE_HEADER Struct; + MPI2_CONFIG_EXTENDED_PAGE_HEADER Ext; + U8 Bytes[8]; + U16 Word16[4]; + U32 Word32[2]; +} MPI2_CONFIG_EXT_PAGE_HEADER_UNION, MPI2_POINTER PTR_MPI2_CONFIG_EXT_PAGE_HEADER_UNION, + Mpi2ConfigPageExtendedHeaderUnion, MPI2_POINTER pMpi2ConfigPageExtendedHeaderUnion; + + +/* PageType field values */ +#define MPI2_CONFIG_PAGEATTR_READ_ONLY (0x00) +#define MPI2_CONFIG_PAGEATTR_CHANGEABLE (0x10) +#define MPI2_CONFIG_PAGEATTR_PERSISTENT (0x20) +#define MPI2_CONFIG_PAGEATTR_MASK (0xF0) + +#define MPI2_CONFIG_PAGETYPE_IO_UNIT (0x00) +#define MPI2_CONFIG_PAGETYPE_IOC (0x01) +#define MPI2_CONFIG_PAGETYPE_BIOS (0x02) +#define MPI2_CONFIG_PAGETYPE_RAID_VOLUME (0x08) +#define MPI2_CONFIG_PAGETYPE_MANUFACTURING (0x09) +#define MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A) +#define MPI2_CONFIG_PAGETYPE_EXTENDED (0x0F) +#define MPI2_CONFIG_PAGETYPE_MASK (0x0F) + +#define MPI2_CONFIG_TYPENUM_MASK (0x0FFF) + + +/* ExtPageType field values */ +#define MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT (0x10) +#define MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER (0x11) +#define MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE (0x12) +#define MPI2_CONFIG_EXTPAGETYPE_SAS_PHY (0x13) +#define MPI2_CONFIG_EXTPAGETYPE_LOG (0x14) +#define MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE (0x15) +#define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG (0x16) +#define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING (0x17) +#define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18) + + +/***************************************************************************** +* PageAddress defines +*****************************************************************************/ + +/* RAID Volume PageAddress format */ +#define MPI2_RAID_VOLUME_PGAD_FORM_MASK (0xF0000000) +#define MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI2_RAID_VOLUME_PGAD_FORM_HANDLE (0x10000000) + +#define MPI2_RAID_VOLUME_PGAD_HANDLE_MASK (0x0000FFFF) + + +/* RAID Physical Disk PageAddress format */ +#define MPI2_PHYSDISK_PGAD_FORM_MASK (0xF0000000) +#define MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM (0x00000000) +#define MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM (0x10000000) +#define MPI2_PHYSDISK_PGAD_FORM_DEVHANDLE (0x20000000) + +#define MPI2_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF) +#define MPI2_PHYSDISK_PGAD_DEVHANDLE_MASK (0x0000FFFF) + + +/* SAS Expander PageAddress format */ +#define MPI2_SAS_EXPAND_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL (0x00000000) +#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM (0x10000000) +#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL (0x20000000) + +#define MPI2_SAS_EXPAND_PGAD_HANDLE_MASK (0x0000FFFF) +#define MPI2_SAS_EXPAND_PGAD_PHYNUM_MASK (0x00FF0000) +#define MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT (16) + + +/* SAS Device PageAddress format */ +#define MPI2_SAS_DEVICE_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI2_SAS_DEVICE_PGAD_FORM_HANDLE (0x20000000) + +#define MPI2_SAS_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF) + + +/* SAS PHY PageAddress format */ +#define MPI2_SAS_PHY_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x00000000) +#define MPI2_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX (0x10000000) + +#define MPI2_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000FF) +#define MPI2_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK (0x0000FFFF) + + +/* SAS Port PageAddress format */ +#define MPI2_SASPORT_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SASPORT_PGAD_FORM_GET_NEXT_PORT (0x00000000) +#define MPI2_SASPORT_PGAD_FORM_PORT_NUM (0x10000000) + +#define MPI2_SASPORT_PGAD_PORTNUMBER_MASK (0x00000FFF) + + +/* SAS Enclosure PageAddress format */ +#define MPI2_SAS_ENCLOS_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE (0x10000000) + +#define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF) + + +/* RAID Configuration PageAddress format */ +#define MPI2_RAID_PGAD_FORM_MASK (0xF0000000) +#define MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM (0x00000000) +#define MPI2_RAID_PGAD_FORM_CONFIGNUM (0x10000000) +#define MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG (0x20000000) + +#define MPI2_RAID_PGAD_CONFIGNUM_MASK (0x000000FF) + + +/* Driver Persistent Mapping PageAddress format */ +#define MPI2_DPM_PGAD_FORM_MASK (0xF0000000) +#define MPI2_DPM_PGAD_FORM_ENTRY_RANGE (0x00000000) + +#define MPI2_DPM_PGAD_ENTRY_COUNT_MASK (0x0FFF0000) +#define MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT (16) +#define MPI2_DPM_PGAD_START_ENTRY_MASK (0x0000FFFF) + + +/**************************************************************************** +* Configuration messages +****************************************************************************/ + +/* Configuration Request Message */ +typedef struct _MPI2_CONFIG_REQUEST +{ + U8 Action; /* 0x00 */ + U8 SGLFlags; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 ExtPageLength; /* 0x04 */ + U8 ExtPageType; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U32 Reserved2; /* 0x0C */ + U32 Reserved3; /* 0x10 */ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */ + U32 PageAddress; /* 0x18 */ + MPI2_SGE_IO_UNION PageBufferSGE; /* 0x1C */ +} MPI2_CONFIG_REQUEST, MPI2_POINTER PTR_MPI2_CONFIG_REQUEST, + Mpi2ConfigRequest_t, MPI2_POINTER pMpi2ConfigRequest_t; + +/* values for the Action field */ +#define MPI2_CONFIG_ACTION_PAGE_HEADER (0x00) +#define MPI2_CONFIG_ACTION_PAGE_READ_CURRENT (0x01) +#define MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02) +#define MPI2_CONFIG_ACTION_PAGE_DEFAULT (0x03) +#define MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04) +#define MPI2_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05) +#define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM (0x06) +#define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE (0x07) + +/* values for SGLFlags field are in the SGL section of mpi2.h */ + + +/* Config Reply Message */ +typedef struct _MPI2_CONFIG_REPLY +{ + U8 Action; /* 0x00 */ + U8 SGLFlags; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 ExtPageLength; /* 0x04 */ + U8 ExtPageType; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U16 Reserved2; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */ +} MPI2_CONFIG_REPLY, MPI2_POINTER PTR_MPI2_CONFIG_REPLY, + Mpi2ConfigReply_t, MPI2_POINTER pMpi2ConfigReply_t; + + + +/***************************************************************************** +* +* C o n f i g u r a t i o n P a g e s +* +*****************************************************************************/ + +/**************************************************************************** +* Manufacturing Config pages +****************************************************************************/ + +#define MPI2_MFGPAGE_VENDORID_LSI (0x1000) + +/* SAS */ +#define MPI2_MFGPAGE_DEVID_SAS2004 (0x0070) +#define MPI2_MFGPAGE_DEVID_SAS2008 (0x0072) +#define MPI2_MFGPAGE_DEVID_SAS2108_1 (0x0074) +#define MPI2_MFGPAGE_DEVID_SAS2108_2 (0x0076) +#define MPI2_MFGPAGE_DEVID_SAS2108_3 (0x0077) +#define MPI2_MFGPAGE_DEVID_SAS2116_1 (0x0064) +#define MPI2_MFGPAGE_DEVID_SAS2116_2 (0x0065) + + +/* Manufacturing Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_MAN_0 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 ChipName[16]; /* 0x04 */ + U8 ChipRevision[8]; /* 0x14 */ + U8 BoardName[16]; /* 0x1C */ + U8 BoardAssembly[16]; /* 0x2C */ + U8 BoardTracerNumber[16]; /* 0x3C */ +} MPI2_CONFIG_PAGE_MAN_0, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_0, + Mpi2ManufacturingPage0_t, MPI2_POINTER pMpi2ManufacturingPage0_t; + +#define MPI2_MANUFACTURING0_PAGEVERSION (0x00) + + +/* Manufacturing Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_MAN_1 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 VPD[256]; /* 0x04 */ +} MPI2_CONFIG_PAGE_MAN_1, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_1, + Mpi2ManufacturingPage1_t, MPI2_POINTER pMpi2ManufacturingPage1_t; + +#define MPI2_MANUFACTURING1_PAGEVERSION (0x00) + + +typedef struct _MPI2_CHIP_REVISION_ID +{ + U16 DeviceID; /* 0x00 */ + U8 PCIRevisionID; /* 0x02 */ + U8 Reserved; /* 0x03 */ +} MPI2_CHIP_REVISION_ID, MPI2_POINTER PTR_MPI2_CHIP_REVISION_ID, + Mpi2ChipRevisionId_t, MPI2_POINTER pMpi2ChipRevisionId_t; + + +/* Manufacturing Page 2 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS +#define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_MAN_2 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + MPI2_CHIP_REVISION_ID ChipId; /* 0x04 */ + U32 HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 0x08 */ +} MPI2_CONFIG_PAGE_MAN_2, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_2, + Mpi2ManufacturingPage2_t, MPI2_POINTER pMpi2ManufacturingPage2_t; + +#define MPI2_MANUFACTURING2_PAGEVERSION (0x00) + + +/* Manufacturing Page 3 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI2_MAN_PAGE_3_INFO_WORDS +#define MPI2_MAN_PAGE_3_INFO_WORDS (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_MAN_3 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + MPI2_CHIP_REVISION_ID ChipId; /* 0x04 */ + U32 Info[MPI2_MAN_PAGE_3_INFO_WORDS];/* 0x08 */ +} MPI2_CONFIG_PAGE_MAN_3, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_3, + Mpi2ManufacturingPage3_t, MPI2_POINTER pMpi2ManufacturingPage3_t; + +#define MPI2_MANUFACTURING3_PAGEVERSION (0x00) + + +/* Manufacturing Page 4 */ + +typedef struct _MPI2_MANPAGE4_PWR_SAVE_SETTINGS +{ + U8 PowerSaveFlags; /* 0x00 */ + U8 InternalOperationsSleepTime; /* 0x01 */ + U8 InternalOperationsRunTime; /* 0x02 */ + U8 HostIdleTime; /* 0x03 */ +} MPI2_MANPAGE4_PWR_SAVE_SETTINGS, + MPI2_POINTER PTR_MPI2_MANPAGE4_PWR_SAVE_SETTINGS, + Mpi2ManPage4PwrSaveSettings_t, MPI2_POINTER pMpi2ManPage4PwrSaveSettings_t; + +/* defines for the PowerSaveFlags field */ +#define MPI2_MANPAGE4_MASK_POWERSAVE_MODE (0x03) +#define MPI2_MANPAGE4_POWERSAVE_MODE_DISABLED (0x00) +#define MPI2_MANPAGE4_CUSTOM_POWERSAVE_MODE (0x01) +#define MPI2_MANPAGE4_FULL_POWERSAVE_MODE (0x02) + +typedef struct _MPI2_CONFIG_PAGE_MAN_4 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 Flags; /* 0x08 */ + U8 InquirySize; /* 0x0C */ + U8 Reserved2; /* 0x0D */ + U16 Reserved3; /* 0x0E */ + U8 InquiryData[56]; /* 0x10 */ + U32 RAID0VolumeSettings; /* 0x48 */ + U32 RAID1EVolumeSettings; /* 0x4C */ + U32 RAID1VolumeSettings; /* 0x50 */ + U32 RAID10VolumeSettings; /* 0x54 */ + U32 Reserved4; /* 0x58 */ + U32 Reserved5; /* 0x5C */ + MPI2_MANPAGE4_PWR_SAVE_SETTINGS PowerSaveSettings; /* 0x60 */ + U8 MaxOCEDisks; /* 0x64 */ + U8 ResyncRate; /* 0x65 */ + U16 DataScrubDuration; /* 0x66 */ + U8 MaxHotSpares; /* 0x68 */ + U8 MaxPhysDisksPerVol; /* 0x69 */ + U8 MaxPhysDisks; /* 0x6A */ + U8 MaxVolumes; /* 0x6B */ +} MPI2_CONFIG_PAGE_MAN_4, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_4, + Mpi2ManufacturingPage4_t, MPI2_POINTER pMpi2ManufacturingPage4_t; + +#define MPI2_MANUFACTURING4_PAGEVERSION (0x0A) + +/* Manufacturing Page 4 Flags field */ +#define MPI2_MANPAGE4_METADATA_SIZE_MASK (0x00030000) +#define MPI2_MANPAGE4_METADATA_512MB (0x00000000) + +#define MPI2_MANPAGE4_MIX_SSD_SAS_SATA (0x00008000) +#define MPI2_MANPAGE4_MIX_SSD_AND_NON_SSD (0x00004000) +#define MPI2_MANPAGE4_HIDE_PHYSDISK_NON_IR (0x00002000) + +#define MPI2_MANPAGE4_MASK_PHYSDISK_COERCION (0x00001C00) +#define MPI2_MANPAGE4_PHYSDISK_COERCION_1GB (0x00000000) +#define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION (0x00000400) +#define MPI2_MANPAGE4_PHYSDISK_ADAPTIVE_COERCION (0x00000800) +#define MPI2_MANPAGE4_PHYSDISK_ZERO_COERCION (0x00000C00) + +#define MPI2_MANPAGE4_MASK_BAD_BLOCK_MARKING (0x00000300) +#define MPI2_MANPAGE4_DEFAULT_BAD_BLOCK_MARKING (0x00000000) +#define MPI2_MANPAGE4_TABLE_BAD_BLOCK_MARKING (0x00000100) +#define MPI2_MANPAGE4_WRITE_LONG_BAD_BLOCK_MARKING (0x00000200) + +#define MPI2_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x00000080) +#define MPI2_MANPAGE4_RAID10_DISABLE (0x00000040) +#define MPI2_MANPAGE4_RAID1E_DISABLE (0x00000020) +#define MPI2_MANPAGE4_RAID1_DISABLE (0x00000010) +#define MPI2_MANPAGE4_RAID0_DISABLE (0x00000008) +#define MPI2_MANPAGE4_IR_MODEPAGE8_DISABLE (0x00000004) +#define MPI2_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x00000002) +#define MPI2_MANPAGE4_IR_NO_MIX_SAS_SATA (0x00000001) + + +/* Manufacturing Page 5 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength or NumPhys at runtime. + */ +#ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES +#define MPI2_MAN_PAGE_5_PHY_ENTRIES (1) +#endif + +typedef struct _MPI2_MANUFACTURING5_ENTRY +{ + U64 WWID; /* 0x00 */ + U64 DeviceName; /* 0x08 */ +} MPI2_MANUFACTURING5_ENTRY, MPI2_POINTER PTR_MPI2_MANUFACTURING5_ENTRY, + Mpi2Manufacturing5Entry_t, MPI2_POINTER pMpi2Manufacturing5Entry_t; + +typedef struct _MPI2_CONFIG_PAGE_MAN_5 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 NumPhys; /* 0x04 */ + U8 Reserved1; /* 0x05 */ + U16 Reserved2; /* 0x06 */ + U32 Reserved3; /* 0x08 */ + U32 Reserved4; /* 0x0C */ + MPI2_MANUFACTURING5_ENTRY Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/* 0x08 */ +} MPI2_CONFIG_PAGE_MAN_5, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_5, + Mpi2ManufacturingPage5_t, MPI2_POINTER pMpi2ManufacturingPage5_t; + +#define MPI2_MANUFACTURING5_PAGEVERSION (0x03) + + +/* Manufacturing Page 6 */ + +typedef struct _MPI2_CONFIG_PAGE_MAN_6 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 ProductSpecificInfo;/* 0x04 */ +} MPI2_CONFIG_PAGE_MAN_6, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_6, + Mpi2ManufacturingPage6_t, MPI2_POINTER pMpi2ManufacturingPage6_t; + +#define MPI2_MANUFACTURING6_PAGEVERSION (0x00) + + +/* Manufacturing Page 7 */ + +typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO +{ + U32 Pinout; /* 0x00 */ + U8 Connector[16]; /* 0x04 */ + U8 Location; /* 0x14 */ + U8 Reserved1; /* 0x15 */ + U16 Slot; /* 0x16 */ + U32 Reserved2; /* 0x18 */ +} MPI2_MANPAGE7_CONNECTOR_INFO, MPI2_POINTER PTR_MPI2_MANPAGE7_CONNECTOR_INFO, + Mpi2ManPage7ConnectorInfo_t, MPI2_POINTER pMpi2ManPage7ConnectorInfo_t; + +/* defines for the Pinout field */ +#define MPI2_MANPAGE7_PINOUT_SFF_8484_L4 (0x00080000) +#define MPI2_MANPAGE7_PINOUT_SFF_8484_L3 (0x00040000) +#define MPI2_MANPAGE7_PINOUT_SFF_8484_L2 (0x00020000) +#define MPI2_MANPAGE7_PINOUT_SFF_8484_L1 (0x00010000) +#define MPI2_MANPAGE7_PINOUT_SFF_8470_L4 (0x00000800) +#define MPI2_MANPAGE7_PINOUT_SFF_8470_L3 (0x00000400) +#define MPI2_MANPAGE7_PINOUT_SFF_8470_L2 (0x00000200) +#define MPI2_MANPAGE7_PINOUT_SFF_8470_L1 (0x00000100) +#define MPI2_MANPAGE7_PINOUT_SFF_8482 (0x00000002) +#define MPI2_MANPAGE7_PINOUT_CONNECTION_UNKNOWN (0x00000001) + +/* defines for the Location field */ +#define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01) +#define MPI2_MANPAGE7_LOCATION_INTERNAL (0x02) +#define MPI2_MANPAGE7_LOCATION_EXTERNAL (0x04) +#define MPI2_MANPAGE7_LOCATION_SWITCHABLE (0x08) +#define MPI2_MANPAGE7_LOCATION_AUTO (0x10) +#define MPI2_MANPAGE7_LOCATION_NOT_PRESENT (0x20) +#define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED (0x80) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check NumPhys at runtime. + */ +#ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX +#define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_MAN_7 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 Reserved2; /* 0x08 */ + U32 Flags; /* 0x0C */ + U8 EnclosureName[16]; /* 0x10 */ + U8 NumPhys; /* 0x20 */ + U8 Reserved3; /* 0x21 */ + U16 Reserved4; /* 0x22 */ + MPI2_MANPAGE7_CONNECTOR_INFO ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /* 0x24 */ +} MPI2_CONFIG_PAGE_MAN_7, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_7, + Mpi2ManufacturingPage7_t, MPI2_POINTER pMpi2ManufacturingPage7_t; + +#define MPI2_MANUFACTURING7_PAGEVERSION (0x00) + +/* defines for the Flags field */ +#define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001) + + +/* + * Generic structure to use for product-specific manufacturing pages + * (currently Manufacturing Page 8 through Manufacturing Page 31). + */ + +typedef struct _MPI2_CONFIG_PAGE_MAN_PS +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 ProductSpecificInfo;/* 0x04 */ +} MPI2_CONFIG_PAGE_MAN_PS, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_PS, + Mpi2ManufacturingPagePS_t, MPI2_POINTER pMpi2ManufacturingPagePS_t; + +#define MPI2_MANUFACTURING8_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING9_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING10_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING11_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING12_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING13_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING14_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING15_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING16_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING17_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING18_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING19_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING20_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING21_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING22_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING23_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING24_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING25_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING26_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING27_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING28_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING29_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING30_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING31_PAGEVERSION (0x00) + + +/**************************************************************************** +* IO Unit Config Pages +****************************************************************************/ + +/* IO Unit Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_0 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U64 UniqueValue; /* 0x04 */ + MPI2_VERSION_UNION NvdataVersionDefault; /* 0x08 */ + MPI2_VERSION_UNION NvdataVersionPersistent; /* 0x0A */ +} MPI2_CONFIG_PAGE_IO_UNIT_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_0, + Mpi2IOUnitPage0_t, MPI2_POINTER pMpi2IOUnitPage0_t; + +#define MPI2_IOUNITPAGE0_PAGEVERSION (0x02) + + +/* IO Unit Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Flags; /* 0x04 */ +} MPI2_CONFIG_PAGE_IO_UNIT_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_1, + Mpi2IOUnitPage1_t, MPI2_POINTER pMpi2IOUnitPage1_t; + +#define MPI2_IOUNITPAGE1_PAGEVERSION (0x04) + +/* IO Unit Page 1 Flags defines */ +#define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE (0x00000600) +#define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE (0x00000000) +#define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE (0x00000200) +#define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE (0x00000400) +#define MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100) +#define MPI2_IOUNITPAGE1_DISABLE_IR (0x00000040) +#define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020) +#define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004) +#define MPI2_IOUNITPAGE1_MULTI_PATHING (0x00000002) +#define MPI2_IOUNITPAGE1_SINGLE_PATHING (0x00000000) + + +/* IO Unit Page 3 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX +#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 GPIOCount; /* 0x04 */ + U8 Reserved1; /* 0x05 */ + U16 Reserved2; /* 0x06 */ + U16 GPIOVal[MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX];/* 0x08 */ +} MPI2_CONFIG_PAGE_IO_UNIT_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_3, + Mpi2IOUnitPage3_t, MPI2_POINTER pMpi2IOUnitPage3_t; + +#define MPI2_IOUNITPAGE3_PAGEVERSION (0x01) + +/* defines for IO Unit Page 3 GPIOVal field */ +#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFFFC) +#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2) +#define MPI2_IOUNITPAGE3_GPIO_SETTING_OFF (0x0000) +#define MPI2_IOUNITPAGE3_GPIO_SETTING_ON (0x0001) + + +/**************************************************************************** +* IOC Config Pages +****************************************************************************/ + +/* IOC Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_IOC_0 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 Reserved2; /* 0x08 */ + U16 VendorID; /* 0x0C */ + U16 DeviceID; /* 0x0E */ + U8 RevisionID; /* 0x10 */ + U8 Reserved3; /* 0x11 */ + U16 Reserved4; /* 0x12 */ + U32 ClassCode; /* 0x14 */ + U16 SubsystemVendorID; /* 0x18 */ + U16 SubsystemID; /* 0x1A */ +} MPI2_CONFIG_PAGE_IOC_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_0, + Mpi2IOCPage0_t, MPI2_POINTER pMpi2IOCPage0_t; + +#define MPI2_IOCPAGE0_PAGEVERSION (0x02) + + +/* IOC Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_IOC_1 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Flags; /* 0x04 */ + U32 CoalescingTimeout; /* 0x08 */ + U8 CoalescingDepth; /* 0x0C */ + U8 PCISlotNum; /* 0x0D */ + U8 PCIBusNum; /* 0x0E */ + U8 PCIDomainSegment; /* 0x0F */ + U32 Reserved1; /* 0x10 */ + U32 Reserved2; /* 0x14 */ +} MPI2_CONFIG_PAGE_IOC_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_1, + Mpi2IOCPage1_t, MPI2_POINTER pMpi2IOCPage1_t; + +#define MPI2_IOCPAGE1_PAGEVERSION (0x05) + +/* defines for IOC Page 1 Flags field */ +#define MPI2_IOCPAGE1_REPLY_COALESCING (0x00000001) + +#define MPI2_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF) +#define MPI2_IOCPAGE1_PCIBUSNUM_UNKNOWN (0xFF) +#define MPI2_IOCPAGE1_PCIDOMAIN_UNKNOWN (0xFF) + +/* IOC Page 6 */ + +typedef struct _MPI2_CONFIG_PAGE_IOC_6 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 CapabilitiesFlags; /* 0x04 */ + U8 MaxDrivesRAID0; /* 0x08 */ + U8 MaxDrivesRAID1; /* 0x09 */ + U8 MaxDrivesRAID1E; /* 0x0A */ + U8 MaxDrivesRAID10; /* 0x0B */ + U8 MinDrivesRAID0; /* 0x0C */ + U8 MinDrivesRAID1; /* 0x0D */ + U8 MinDrivesRAID1E; /* 0x0E */ + U8 MinDrivesRAID10; /* 0x0F */ + U32 Reserved1; /* 0x10 */ + U8 MaxGlobalHotSpares; /* 0x14 */ + U8 MaxPhysDisks; /* 0x15 */ + U8 MaxVolumes; /* 0x16 */ + U8 MaxConfigs; /* 0x17 */ + U8 MaxOCEDisks; /* 0x18 */ + U8 Reserved2; /* 0x19 */ + U16 Reserved3; /* 0x1A */ + U32 SupportedStripeSizeMapRAID0; /* 0x1C */ + U32 SupportedStripeSizeMapRAID1E; /* 0x20 */ + U32 SupportedStripeSizeMapRAID10; /* 0x24 */ + U32 Reserved4; /* 0x28 */ + U32 Reserved5; /* 0x2C */ + U16 DefaultMetadataSize; /* 0x30 */ + U16 Reserved6; /* 0x32 */ + U16 MaxBadBlockTableEntries; /* 0x34 */ + U16 Reserved7; /* 0x36 */ + U32 IRNvsramVersion; /* 0x38 */ +} MPI2_CONFIG_PAGE_IOC_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_6, + Mpi2IOCPage6_t, MPI2_POINTER pMpi2IOCPage6_t; + +#define MPI2_IOCPAGE6_PAGEVERSION (0x04) + +/* defines for IOC Page 6 CapabilitiesFlags */ +#define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT (0x00000010) +#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT (0x00000008) +#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT (0x00000004) +#define MPI2_IOCPAGE6_CAP_FLAGS_RAID0_SUPPORT (0x00000002) +#define MPI2_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001) + + +/* IOC Page 7 */ + +#define MPI2_IOCPAGE7_EVENTMASK_WORDS (4) + +typedef struct _MPI2_CONFIG_PAGE_IOC_7 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/* 0x08 */ + U16 SASBroadcastPrimitiveMasks; /* 0x18 */ + U16 Reserved2; /* 0x1A */ + U32 Reserved3; /* 0x1C */ +} MPI2_CONFIG_PAGE_IOC_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_7, + Mpi2IOCPage7_t, MPI2_POINTER pMpi2IOCPage7_t; + +#define MPI2_IOCPAGE7_PAGEVERSION (0x01) + + +/* IOC Page 8 */ + +typedef struct _MPI2_CONFIG_PAGE_IOC_8 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 NumDevsPerEnclosure; /* 0x04 */ + U8 Reserved1; /* 0x05 */ + U16 Reserved2; /* 0x06 */ + U16 MaxPersistentEntries; /* 0x08 */ + U16 MaxNumPhysicalMappedIDs; /* 0x0A */ + U16 Flags; /* 0x0C */ + U16 Reserved3; /* 0x0E */ + U16 IRVolumeMappingFlags; /* 0x10 */ + U16 Reserved4; /* 0x12 */ + U32 Reserved5; /* 0x14 */ +} MPI2_CONFIG_PAGE_IOC_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_8, + Mpi2IOCPage8_t, MPI2_POINTER pMpi2IOCPage8_t; + +#define MPI2_IOCPAGE8_PAGEVERSION (0x00) + +/* defines for IOC Page 8 Flags field */ +#define MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1 (0x00000020) +#define MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0 (0x00000010) + +#define MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE (0x0000000E) +#define MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING (0x00000000) +#define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING (0x00000002) + +#define MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING (0x00000001) +#define MPI2_IOCPAGE8_FLAGS_ENABLE_PERSISTENT_MAPPING (0x00000000) + +/* defines for IOC Page 8 IRVolumeMappingFlags */ +#define MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE (0x00000003) +#define MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING (0x00000000) +#define MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING (0x00000001) + + +/**************************************************************************** +* BIOS Config Pages +****************************************************************************/ + +/* BIOS Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_BIOS_1 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 BiosOptions; /* 0x04 */ + U32 IOCSettings; /* 0x08 */ + U32 Reserved1; /* 0x0C */ + U32 DeviceSettings; /* 0x10 */ + U16 NumberOfDevices; /* 0x14 */ + U16 Reserved2; /* 0x16 */ + U16 IOTimeoutBlockDevicesNonRM; /* 0x18 */ + U16 IOTimeoutSequential; /* 0x1A */ + U16 IOTimeoutOther; /* 0x1C */ + U16 IOTimeoutBlockDevicesRM; /* 0x1E */ +} MPI2_CONFIG_PAGE_BIOS_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_1, + Mpi2BiosPage1_t, MPI2_POINTER pMpi2BiosPage1_t; + +#define MPI2_BIOSPAGE1_PAGEVERSION (0x04) + +/* values for BIOS Page 1 BiosOptions field */ +#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001) + +/* values for BIOS Page 1 IOCSettings field */ +#define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000) +#define MPI2_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000) +#define MPI2_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000) + +#define MPI2_BIOSPAGE1_IOCSET_MASK_RM_SETTING (0x000000C0) +#define MPI2_BIOSPAGE1_IOCSET_NONE_RM_SETTING (0x00000000) +#define MPI2_BIOSPAGE1_IOCSET_BOOT_RM_SETTING (0x00000040) +#define MPI2_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING (0x00000080) + +#define MPI2_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT (0x00000030) +#define MPI2_BIOSPAGE1_IOCSET_NO_SUPPORT (0x00000000) +#define MPI2_BIOSPAGE1_IOCSET_BIOS_SUPPORT (0x00000010) +#define MPI2_BIOSPAGE1_IOCSET_OS_SUPPORT (0x00000020) +#define MPI2_BIOSPAGE1_IOCSET_ALL_SUPPORT (0x00000030) + +#define MPI2_BIOSPAGE1_IOCSET_ALTERNATE_CHS (0x00000008) + +/* values for BIOS Page 1 DeviceSettings field */ +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING (0x00000010) +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN (0x00000008) +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_RM_LUN (0x00000004) +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002) +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001) + + +/* BIOS Page 2 */ + +typedef struct _MPI2_BOOT_DEVICE_ADAPTER_ORDER +{ + U32 Reserved1; /* 0x00 */ + U32 Reserved2; /* 0x04 */ + U32 Reserved3; /* 0x08 */ + U32 Reserved4; /* 0x0C */ + U32 Reserved5; /* 0x10 */ + U32 Reserved6; /* 0x14 */ +} MPI2_BOOT_DEVICE_ADAPTER_ORDER, + MPI2_POINTER PTR_MPI2_BOOT_DEVICE_ADAPTER_ORDER, + Mpi2BootDeviceAdapterOrder_t, MPI2_POINTER pMpi2BootDeviceAdapterOrder_t; + +typedef struct _MPI2_BOOT_DEVICE_SAS_WWID +{ + U64 SASAddress; /* 0x00 */ + U8 LUN[8]; /* 0x08 */ + U32 Reserved1; /* 0x10 */ + U32 Reserved2; /* 0x14 */ +} MPI2_BOOT_DEVICE_SAS_WWID, MPI2_POINTER PTR_MPI2_BOOT_DEVICE_SAS_WWID, + Mpi2BootDeviceSasWwid_t, MPI2_POINTER pMpi2BootDeviceSasWwid_t; + +typedef struct _MPI2_BOOT_DEVICE_ENCLOSURE_SLOT +{ + U64 EnclosureLogicalID; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U32 Reserved2; /* 0x0C */ + U16 SlotNumber; /* 0x10 */ + U16 Reserved3; /* 0x12 */ + U32 Reserved4; /* 0x14 */ +} MPI2_BOOT_DEVICE_ENCLOSURE_SLOT, + MPI2_POINTER PTR_MPI2_BOOT_DEVICE_ENCLOSURE_SLOT, + Mpi2BootDeviceEnclosureSlot_t, MPI2_POINTER pMpi2BootDeviceEnclosureSlot_t; + +typedef struct _MPI2_BOOT_DEVICE_DEVICE_NAME +{ + U64 DeviceName; /* 0x00 */ + U8 LUN[8]; /* 0x08 */ + U32 Reserved1; /* 0x10 */ + U32 Reserved2; /* 0x14 */ +} MPI2_BOOT_DEVICE_DEVICE_NAME, MPI2_POINTER PTR_MPI2_BOOT_DEVICE_DEVICE_NAME, + Mpi2BootDeviceDeviceName_t, MPI2_POINTER pMpi2BootDeviceDeviceName_t; + +typedef union _MPI2_MPI2_BIOSPAGE2_BOOT_DEVICE +{ + MPI2_BOOT_DEVICE_ADAPTER_ORDER AdapterOrder; + MPI2_BOOT_DEVICE_SAS_WWID SasWwid; + MPI2_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot; + MPI2_BOOT_DEVICE_DEVICE_NAME DeviceName; +} MPI2_BIOSPAGE2_BOOT_DEVICE, MPI2_POINTER PTR_MPI2_BIOSPAGE2_BOOT_DEVICE, + Mpi2BiosPage2BootDevice_t, MPI2_POINTER pMpi2BiosPage2BootDevice_t; + +typedef struct _MPI2_CONFIG_PAGE_BIOS_2 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 Reserved2; /* 0x08 */ + U32 Reserved3; /* 0x0C */ + U32 Reserved4; /* 0x10 */ + U32 Reserved5; /* 0x14 */ + U32 Reserved6; /* 0x18 */ + U8 ReqBootDeviceForm; /* 0x1C */ + U8 Reserved7; /* 0x1D */ + U16 Reserved8; /* 0x1E */ + MPI2_BIOSPAGE2_BOOT_DEVICE RequestedBootDevice; /* 0x20 */ + U8 ReqAltBootDeviceForm; /* 0x38 */ + U8 Reserved9; /* 0x39 */ + U16 Reserved10; /* 0x3A */ + MPI2_BIOSPAGE2_BOOT_DEVICE RequestedAltBootDevice; /* 0x3C */ + U8 CurrentBootDeviceForm; /* 0x58 */ + U8 Reserved11; /* 0x59 */ + U16 Reserved12; /* 0x5A */ + MPI2_BIOSPAGE2_BOOT_DEVICE CurrentBootDevice; /* 0x58 */ +} MPI2_CONFIG_PAGE_BIOS_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_2, + Mpi2BiosPage2_t, MPI2_POINTER pMpi2BiosPage2_t; + +#define MPI2_BIOSPAGE2_PAGEVERSION (0x04) + +/* values for BIOS Page 2 BootDeviceForm fields */ +#define MPI2_BIOSPAGE2_FORM_MASK (0x0F) +#define MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED (0x00) +#define MPI2_BIOSPAGE2_FORM_SAS_WWID (0x05) +#define MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06) +#define MPI2_BIOSPAGE2_FORM_DEVICE_NAME (0x07) + + +/* BIOS Page 3 */ + +typedef struct _MPI2_ADAPTER_INFO +{ + U8 PciBusNumber; /* 0x00 */ + U8 PciDeviceAndFunctionNumber; /* 0x01 */ + U16 AdapterFlags; /* 0x02 */ +} MPI2_ADAPTER_INFO, MPI2_POINTER PTR_MPI2_ADAPTER_INFO, + Mpi2AdapterInfo_t, MPI2_POINTER pMpi2AdapterInfo_t; + +#define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001) +#define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002) + +typedef struct _MPI2_CONFIG_PAGE_BIOS_3 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 GlobalFlags; /* 0x04 */ + U32 BiosVersion; /* 0x08 */ + MPI2_ADAPTER_INFO AdapterOrder[4]; /* 0x0C */ + U32 Reserved1; /* 0x1C */ +} MPI2_CONFIG_PAGE_BIOS_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_3, + Mpi2BiosPage3_t, MPI2_POINTER pMpi2BiosPage3_t; + +#define MPI2_BIOSPAGE3_PAGEVERSION (0x00) + +/* values for BIOS Page 3 GlobalFlags */ +#define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR (0x00000002) +#define MPI2_BIOSPAGE3_FLAGS_VERBOSE_ENABLE (0x00000004) +#define MPI2_BIOSPAGE3_FLAGS_HOOK_INT_40_DISABLE (0x00000010) + +#define MPI2_BIOSPAGE3_FLAGS_DEV_LIST_DISPLAY_MASK (0x000000E0) +#define MPI2_BIOSPAGE3_FLAGS_INSTALLED_DEV_DISPLAY (0x00000000) +#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DISPLAY (0x00000020) +#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DEV_DISPLAY (0x00000040) + + +/* BIOS Page 4 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength or NumPhys at runtime. + */ +#ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES +#define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1) +#endif + +typedef struct _MPI2_BIOS4_ENTRY +{ + U64 ReassignmentWWID; /* 0x00 */ + U64 ReassignmentDeviceName; /* 0x08 */ +} MPI2_BIOS4_ENTRY, MPI2_POINTER PTR_MPI2_BIOS4_ENTRY, + Mpi2MBios4Entry_t, MPI2_POINTER pMpi2Bios4Entry_t; + +typedef struct _MPI2_CONFIG_PAGE_BIOS_4 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 NumPhys; /* 0x04 */ + U8 Reserved1; /* 0x05 */ + U16 Reserved2; /* 0x06 */ + MPI2_BIOS4_ENTRY Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES]; /* 0x08 */ +} MPI2_CONFIG_PAGE_BIOS_4, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_4, + Mpi2BiosPage4_t, MPI2_POINTER pMpi2BiosPage4_t; + +#define MPI2_BIOSPAGE4_PAGEVERSION (0x01) + + +/**************************************************************************** +* RAID Volume Config Pages +****************************************************************************/ + +/* RAID Volume Page 0 */ + +typedef struct _MPI2_RAIDVOL0_PHYS_DISK +{ + U8 RAIDSetNum; /* 0x00 */ + U8 PhysDiskMap; /* 0x01 */ + U8 PhysDiskNum; /* 0x02 */ + U8 Reserved; /* 0x03 */ +} MPI2_RAIDVOL0_PHYS_DISK, MPI2_POINTER PTR_MPI2_RAIDVOL0_PHYS_DISK, + Mpi2RaidVol0PhysDisk_t, MPI2_POINTER pMpi2RaidVol0PhysDisk_t; + +/* defines for the PhysDiskMap field */ +#define MPI2_RAIDVOL0_PHYSDISK_PRIMARY (0x01) +#define MPI2_RAIDVOL0_PHYSDISK_SECONDARY (0x02) + +typedef struct _MPI2_RAIDVOL0_SETTINGS +{ + U16 Settings; /* 0x00 */ + U8 HotSparePool; /* 0x01 */ + U8 Reserved; /* 0x02 */ +} MPI2_RAIDVOL0_SETTINGS, MPI2_POINTER PTR_MPI2_RAIDVOL0_SETTINGS, + Mpi2RaidVol0Settings_t, MPI2_POINTER pMpi2RaidVol0Settings_t; + +/* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */ +#define MPI2_RAID_HOT_SPARE_POOL_0 (0x01) +#define MPI2_RAID_HOT_SPARE_POOL_1 (0x02) +#define MPI2_RAID_HOT_SPARE_POOL_2 (0x04) +#define MPI2_RAID_HOT_SPARE_POOL_3 (0x08) +#define MPI2_RAID_HOT_SPARE_POOL_4 (0x10) +#define MPI2_RAID_HOT_SPARE_POOL_5 (0x20) +#define MPI2_RAID_HOT_SPARE_POOL_6 (0x40) +#define MPI2_RAID_HOT_SPARE_POOL_7 (0x80) + +/* RAID Volume Page 0 VolumeSettings defines */ +#define MPI2_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0008) +#define MPI2_RAIDVOL0_SETTING_AUTO_CONFIG_HSWAP_DISABLE (0x0004) + +#define MPI2_RAIDVOL0_SETTING_MASK_WRITE_CACHING (0x0003) +#define MPI2_RAIDVOL0_SETTING_UNCHANGED (0x0000) +#define MPI2_RAIDVOL0_SETTING_DISABLE_WRITE_CACHING (0x0001) +#define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING (0x0002) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX +#define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U16 DevHandle; /* 0x04 */ + U8 VolumeState; /* 0x06 */ + U8 VolumeType; /* 0x07 */ + U32 VolumeStatusFlags; /* 0x08 */ + MPI2_RAIDVOL0_SETTINGS VolumeSettings; /* 0x0C */ + U64 MaxLBA; /* 0x10 */ + U32 StripeSize; /* 0x18 */ + U16 BlockSize; /* 0x1C */ + U16 Reserved1; /* 0x1E */ + U8 SupportedPhysDisks; /* 0x20 */ + U8 ResyncRate; /* 0x21 */ + U16 DataScrubDuration; /* 0x22 */ + U8 NumPhysDisks; /* 0x24 */ + U8 Reserved2; /* 0x25 */ + U8 Reserved3; /* 0x26 */ + U8 InactiveStatus; /* 0x27 */ + MPI2_RAIDVOL0_PHYS_DISK PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /* 0x28 */ +} MPI2_CONFIG_PAGE_RAID_VOL_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_VOL_0, + Mpi2RaidVolPage0_t, MPI2_POINTER pMpi2RaidVolPage0_t; + +#define MPI2_RAIDVOLPAGE0_PAGEVERSION (0x0A) + +/* values for RAID VolumeState */ +#define MPI2_RAID_VOL_STATE_MISSING (0x00) +#define MPI2_RAID_VOL_STATE_FAILED (0x01) +#define MPI2_RAID_VOL_STATE_INITIALIZING (0x02) +#define MPI2_RAID_VOL_STATE_ONLINE (0x03) +#define MPI2_RAID_VOL_STATE_DEGRADED (0x04) +#define MPI2_RAID_VOL_STATE_OPTIMAL (0x05) + +/* values for RAID VolumeType */ +#define MPI2_RAID_VOL_TYPE_RAID0 (0x00) +#define MPI2_RAID_VOL_TYPE_RAID1E (0x01) +#define MPI2_RAID_VOL_TYPE_RAID1 (0x02) +#define MPI2_RAID_VOL_TYPE_RAID10 (0x05) +#define MPI2_RAID_VOL_TYPE_UNKNOWN (0xFF) + +/* values for RAID Volume Page 0 VolumeStatusFlags field */ +#define MPI2_RAIDVOL0_STATUS_FLAG_PENDING_RESYNC (0x02000000) +#define MPI2_RAIDVOL0_STATUS_FLAG_BACKG_INIT_PENDING (0x01000000) +#define MPI2_RAIDVOL0_STATUS_FLAG_MDC_PENDING (0x00800000) +#define MPI2_RAIDVOL0_STATUS_FLAG_USER_CONSIST_PENDING (0x00400000) +#define MPI2_RAIDVOL0_STATUS_FLAG_MAKE_DATA_CONSISTENT (0x00200000) +#define MPI2_RAIDVOL0_STATUS_FLAG_DATA_SCRUB (0x00100000) +#define MPI2_RAIDVOL0_STATUS_FLAG_CONSISTENCY_CHECK (0x00080000) +#define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION (0x00040000) +#define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT (0x00020000) +#define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x00010000) +#define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED (0x00000040) +#define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE (0x00000020) +#define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR (0x00000000) +#define MPI2_RAIDVOL0_STATUS_FLAG_1E_ADJACENT_MIRROR (0x00000010) +#define MPI2_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL (0x00000008) +#define MPI2_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x00000004) +#define MPI2_RAIDVOL0_STATUS_FLAG_QUIESCED (0x00000002) +#define MPI2_RAIDVOL0_STATUS_FLAG_ENABLED (0x00000001) + +/* values for RAID Volume Page 0 SupportedPhysDisks field */ +#define MPI2_RAIDVOL0_SUPPORT_SOLID_STATE_DISKS (0x08) +#define MPI2_RAIDVOL0_SUPPORT_HARD_DISKS (0x04) +#define MPI2_RAIDVOL0_SUPPORT_SAS_PROTOCOL (0x02) +#define MPI2_RAIDVOL0_SUPPORT_SATA_PROTOCOL (0x01) + +/* values for RAID Volume Page 0 InactiveStatus field */ +#define MPI2_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00) +#define MPI2_RAIDVOLPAGE0_STALE_METADATA_INACTIVE (0x01) +#define MPI2_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE (0x02) +#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03) +#define MPI2_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE (0x04) +#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05) +#define MPI2_RAIDVOLPAGE0_PREVIOUSLY_DELETED (0x06) + + +/* RAID Volume Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_1 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U16 DevHandle; /* 0x04 */ + U16 Reserved0; /* 0x06 */ + U8 GUID[24]; /* 0x08 */ + U8 Name[16]; /* 0x20 */ + U64 WWID; /* 0x30 */ + U32 Reserved1; /* 0x38 */ + U32 Reserved2; /* 0x3C */ +} MPI2_CONFIG_PAGE_RAID_VOL_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_VOL_1, + Mpi2RaidVolPage1_t, MPI2_POINTER pMpi2RaidVolPage1_t; + +#define MPI2_RAIDVOLPAGE1_PAGEVERSION (0x03) + + +/**************************************************************************** +* RAID Physical Disk Config Pages +****************************************************************************/ + +/* RAID Physical Disk Page 0 */ + +typedef struct _MPI2_RAIDPHYSDISK0_SETTINGS +{ + U16 Reserved1; /* 0x00 */ + U8 HotSparePool; /* 0x02 */ + U8 Reserved2; /* 0x03 */ +} MPI2_RAIDPHYSDISK0_SETTINGS, MPI2_POINTER PTR_MPI2_RAIDPHYSDISK0_SETTINGS, + Mpi2RaidPhysDisk0Settings_t, MPI2_POINTER pMpi2RaidPhysDisk0Settings_t; + +/* use MPI2_RAID_HOT_SPARE_POOL_ defines for the HotSparePool field */ + +typedef struct _MPI2_RAIDPHYSDISK0_INQUIRY_DATA +{ + U8 VendorID[8]; /* 0x00 */ + U8 ProductID[16]; /* 0x08 */ + U8 ProductRevLevel[4]; /* 0x18 */ + U8 SerialNum[32]; /* 0x1C */ +} MPI2_RAIDPHYSDISK0_INQUIRY_DATA, + MPI2_POINTER PTR_MPI2_RAIDPHYSDISK0_INQUIRY_DATA, + Mpi2RaidPhysDisk0InquiryData_t, MPI2_POINTER pMpi2RaidPhysDisk0InquiryData_t; + +typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U16 DevHandle; /* 0x04 */ + U8 Reserved1; /* 0x06 */ + U8 PhysDiskNum; /* 0x07 */ + MPI2_RAIDPHYSDISK0_SETTINGS PhysDiskSettings; /* 0x08 */ + U32 Reserved2; /* 0x0C */ + MPI2_RAIDPHYSDISK0_INQUIRY_DATA InquiryData; /* 0x10 */ + U32 Reserved3; /* 0x4C */ + U8 PhysDiskState; /* 0x50 */ + U8 OfflineReason; /* 0x51 */ + U8 IncompatibleReason; /* 0x52 */ + U8 PhysDiskAttributes; /* 0x53 */ + U32 PhysDiskStatusFlags; /* 0x54 */ + U64 DeviceMaxLBA; /* 0x58 */ + U64 HostMaxLBA; /* 0x60 */ + U64 CoercedMaxLBA; /* 0x68 */ + U16 BlockSize; /* 0x70 */ + U16 Reserved5; /* 0x72 */ + U32 Reserved6; /* 0x74 */ +} MPI2_CONFIG_PAGE_RD_PDISK_0, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RD_PDISK_0, + Mpi2RaidPhysDiskPage0_t, MPI2_POINTER pMpi2RaidPhysDiskPage0_t; + +#define MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION (0x05) + +/* PhysDiskState defines */ +#define MPI2_RAID_PD_STATE_NOT_CONFIGURED (0x00) +#define MPI2_RAID_PD_STATE_NOT_COMPATIBLE (0x01) +#define MPI2_RAID_PD_STATE_OFFLINE (0x02) +#define MPI2_RAID_PD_STATE_ONLINE (0x03) +#define MPI2_RAID_PD_STATE_HOT_SPARE (0x04) +#define MPI2_RAID_PD_STATE_DEGRADED (0x05) +#define MPI2_RAID_PD_STATE_REBUILDING (0x06) +#define MPI2_RAID_PD_STATE_OPTIMAL (0x07) + +/* OfflineReason defines */ +#define MPI2_PHYSDISK0_ONLINE (0x00) +#define MPI2_PHYSDISK0_OFFLINE_MISSING (0x01) +#define MPI2_PHYSDISK0_OFFLINE_FAILED (0x03) +#define MPI2_PHYSDISK0_OFFLINE_INITIALIZING (0x04) +#define MPI2_PHYSDISK0_OFFLINE_REQUESTED (0x05) +#define MPI2_PHYSDISK0_OFFLINE_FAILED_REQUESTED (0x06) +#define MPI2_PHYSDISK0_OFFLINE_OTHER (0xFF) + +/* IncompatibleReason defines */ +#define MPI2_PHYSDISK0_COMPATIBLE (0x00) +#define MPI2_PHYSDISK0_INCOMPATIBLE_PROTOCOL (0x01) +#define MPI2_PHYSDISK0_INCOMPATIBLE_BLOCKSIZE (0x02) +#define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA (0x03) +#define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD (0x04) +#define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA (0x05) +#define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN (0xFF) + +/* PhysDiskAttributes defines */ +#define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE (0x08) +#define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE (0x04) +#define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL (0x02) +#define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL (0x01) + +/* PhysDiskStatusFlags defines */ +#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED (0x00000040) +#define MPI2_PHYSDISK0_STATUS_FLAG_OCE_TARGET (0x00000020) +#define MPI2_PHYSDISK0_STATUS_FLAG_WRITE_CACHE_ENABLED (0x00000010) +#define MPI2_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS (0x00000000) +#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x00000008) +#define MPI2_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME (0x00000004) +#define MPI2_PHYSDISK0_STATUS_FLAG_QUIESCED (0x00000002) +#define MPI2_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x00000001) + + +/* RAID Physical Disk Page 1 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength or NumPhysDiskPaths at runtime. + */ +#ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX +#define MPI2_RAID_PHYS_DISK1_PATH_MAX (1) +#endif + +typedef struct _MPI2_RAIDPHYSDISK1_PATH +{ + U16 DevHandle; /* 0x00 */ + U16 Reserved1; /* 0x02 */ + U64 WWID; /* 0x04 */ + U64 OwnerWWID; /* 0x0C */ + U8 OwnerIdentifier; /* 0x14 */ + U8 Reserved2; /* 0x15 */ + U16 Flags; /* 0x16 */ +} MPI2_RAIDPHYSDISK1_PATH, MPI2_POINTER PTR_MPI2_RAIDPHYSDISK1_PATH, + Mpi2RaidPhysDisk1Path_t, MPI2_POINTER pMpi2RaidPhysDisk1Path_t; + +/* RAID Physical Disk Page 1 Physical Disk Path Flags field defines */ +#define MPI2_RAID_PHYSDISK1_FLAG_PRIMARY (0x0004) +#define MPI2_RAID_PHYSDISK1_FLAG_BROKEN (0x0002) +#define MPI2_RAID_PHYSDISK1_FLAG_INVALID (0x0001) + +typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 NumPhysDiskPaths; /* 0x04 */ + U8 PhysDiskNum; /* 0x05 */ + U16 Reserved1; /* 0x06 */ + U32 Reserved2; /* 0x08 */ + MPI2_RAIDPHYSDISK1_PATH PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/* 0x0C */ +} MPI2_CONFIG_PAGE_RD_PDISK_1, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RD_PDISK_1, + Mpi2RaidPhysDiskPage1_t, MPI2_POINTER pMpi2RaidPhysDiskPage1_t; + +#define MPI2_RAIDPHYSDISKPAGE1_PAGEVERSION (0x02) + + +/**************************************************************************** +* values for fields used by several types of SAS Config Pages +****************************************************************************/ + +/* values for NegotiatedLinkRates fields */ +#define MPI2_SAS_NEG_LINK_RATE_MASK_LOGICAL (0xF0) +#define MPI2_SAS_NEG_LINK_RATE_SHIFT_LOGICAL (4) +#define MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL (0x0F) +/* link rates used for Negotiated Physical and Logical Link Rate */ +#define MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE (0x00) +#define MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED (0x01) +#define MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED (0x02) +#define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03) +#define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04) +#define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05) +#define MPI2_SAS_NEG_LINK_RATE_1_5 (0x08) +#define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09) +#define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A) + + +/* values for AttachedPhyInfo fields */ +#define MPI2_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT (0x00000040) +#define MPI2_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS (0x00000020) +#define MPI2_SAS_APHYINFO_BREAK_REPLY_CAPABLE (0x00000010) + +#define MPI2_SAS_APHYINFO_REASON_MASK (0x0000000F) +#define MPI2_SAS_APHYINFO_REASON_UNKNOWN (0x00000000) +#define MPI2_SAS_APHYINFO_REASON_POWER_ON (0x00000001) +#define MPI2_SAS_APHYINFO_REASON_HARD_RESET (0x00000002) +#define MPI2_SAS_APHYINFO_REASON_SMP_PHY_CONTROL (0x00000003) +#define MPI2_SAS_APHYINFO_REASON_LOSS_OF_SYNC (0x00000004) +#define MPI2_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ (0x00000005) +#define MPI2_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00000006) +#define MPI2_SAS_APHYINFO_REASON_BREAK_TIMEOUT (0x00000007) +#define MPI2_SAS_APHYINFO_REASON_PHY_TEST_STOPPED (0x00000008) + + +/* values for PhyInfo fields */ +#define MPI2_SAS_PHYINFO_PHY_VACANT (0x80000000) +#define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS (0x04000000) +#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT (0x02000000) +#define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS (0x01000000) +#define MPI2_SAS_PHYINFO_ZONE_GROUP_PERSISTENT (0x00400000) +#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS (0x00200000) +#define MPI2_SAS_PHYINFO_ZONING_ENABLED (0x00100000) + +#define MPI2_SAS_PHYINFO_REASON_MASK (0x000F0000) +#define MPI2_SAS_PHYINFO_REASON_UNKNOWN (0x00000000) +#define MPI2_SAS_PHYINFO_REASON_POWER_ON (0x00010000) +#define MPI2_SAS_PHYINFO_REASON_HARD_RESET (0x00020000) +#define MPI2_SAS_PHYINFO_REASON_SMP_PHY_CONTROL (0x00030000) +#define MPI2_SAS_PHYINFO_REASON_LOSS_OF_SYNC (0x00040000) +#define MPI2_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ (0x00050000) +#define MPI2_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00060000) +#define MPI2_SAS_PHYINFO_REASON_BREAK_TIMEOUT (0x00070000) +#define MPI2_SAS_PHYINFO_REASON_PHY_TEST_STOPPED (0x00080000) + +#define MPI2_SAS_PHYINFO_MULTIPLEXING_SUPPORTED (0x00008000) +#define MPI2_SAS_PHYINFO_SATA_PORT_ACTIVE (0x00004000) +#define MPI2_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT (0x00002000) +#define MPI2_SAS_PHYINFO_VIRTUAL_PHY (0x00001000) + +#define MPI2_SAS_PHYINFO_MASK_PARTIAL_PATHWAY_TIME (0x00000F00) +#define MPI2_SAS_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME (8) + +#define MPI2_SAS_PHYINFO_MASK_ROUTING_ATTRIBUTE (0x000000F0) +#define MPI2_SAS_PHYINFO_DIRECT_ROUTING (0x00000000) +#define MPI2_SAS_PHYINFO_SUBTRACTIVE_ROUTING (0x00000010) +#define MPI2_SAS_PHYINFO_TABLE_ROUTING (0x00000020) + + +/* values for SAS ProgrammedLinkRate fields */ +#define MPI2_SAS_PRATE_MAX_RATE_MASK (0xF0) +#define MPI2_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00) +#define MPI2_SAS_PRATE_MAX_RATE_1_5 (0x80) +#define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90) +#define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0) +#define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F) +#define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00) +#define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08) +#define MPI2_SAS_PRATE_MIN_RATE_3_0 (0x09) +#define MPI2_SAS_PRATE_MIN_RATE_6_0 (0x0A) + + +/* values for SAS HwLinkRate fields */ +#define MPI2_SAS_HWRATE_MAX_RATE_MASK (0xF0) +#define MPI2_SAS_HWRATE_MAX_RATE_1_5 (0x80) +#define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90) +#define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0) +#define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F) +#define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08) +#define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09) +#define MPI2_SAS_HWRATE_MIN_RATE_6_0 (0x0A) + + + +/**************************************************************************** +* SAS IO Unit Config Pages +****************************************************************************/ + +/* SAS IO Unit Page 0 */ + +typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA +{ + U8 Port; /* 0x00 */ + U8 PortFlags; /* 0x01 */ + U8 PhyFlags; /* 0x02 */ + U8 NegotiatedLinkRate; /* 0x03 */ + U32 ControllerPhyDeviceInfo;/* 0x04 */ + U16 AttachedDevHandle; /* 0x08 */ + U16 ControllerDevHandle; /* 0x0A */ + U32 DiscoveryStatus; /* 0x0C */ + U32 Reserved; /* 0x10 */ +} MPI2_SAS_IO_UNIT0_PHY_DATA, MPI2_POINTER PTR_MPI2_SAS_IO_UNIT0_PHY_DATA, + Mpi2SasIOUnit0PhyData_t, MPI2_POINTER pMpi2SasIOUnit0PhyData_t; + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.ExtPageLength or NumPhys at runtime. + */ +#ifndef MPI2_SAS_IOUNIT0_PHY_MAX +#define MPI2_SAS_IOUNIT0_PHY_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U8 NumPhys; /* 0x0C */ + U8 Reserved2; /* 0x0D */ + U16 Reserved3; /* 0x0E */ + MPI2_SAS_IO_UNIT0_PHY_DATA PhyData[MPI2_SAS_IOUNIT0_PHY_MAX]; /* 0x10 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_0, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_0, + Mpi2SasIOUnitPage0_t, MPI2_POINTER pMpi2SasIOUnitPage0_t; + +#define MPI2_SASIOUNITPAGE0_PAGEVERSION (0x05) + +/* values for SAS IO Unit Page 0 PortFlags */ +#define MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS (0x08) +#define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01) + +/* values for SAS IO Unit Page 0 PhyFlags */ +#define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED (0x10) +#define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08) + +/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + +/* see mpi2_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */ + +/* values for SAS IO Unit Page 0 DiscoveryStatus */ +#define MPI2_SASIOUNIT0_DS_MAX_ENCLOSURES_EXCEED (0x80000000) +#define MPI2_SASIOUNIT0_DS_MAX_EXPANDERS_EXCEED (0x40000000) +#define MPI2_SASIOUNIT0_DS_MAX_DEVICES_EXCEED (0x20000000) +#define MPI2_SASIOUNIT0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) +#define MPI2_SASIOUNIT0_DS_DOWNSTREAM_INITIATOR (0x08000000) +#define MPI2_SASIOUNIT0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) +#define MPI2_SASIOUNIT0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) +#define MPI2_SASIOUNIT0_DS_MULTI_PORT_DOMAIN (0x00002000) +#define MPI2_SASIOUNIT0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) +#define MPI2_SASIOUNIT0_DS_UNSUPPORTED_DEVICE (0x00000800) +#define MPI2_SASIOUNIT0_DS_TABLE_LINK (0x00000400) +#define MPI2_SASIOUNIT0_DS_SUBTRACTIVE_LINK (0x00000200) +#define MPI2_SASIOUNIT0_DS_SMP_CRC_ERROR (0x00000100) +#define MPI2_SASIOUNIT0_DS_SMP_FUNCTION_FAILED (0x00000080) +#define MPI2_SASIOUNIT0_DS_INDEX_NOT_EXIST (0x00000040) +#define MPI2_SASIOUNIT0_DS_OUT_ROUTE_ENTRIES (0x00000020) +#define MPI2_SASIOUNIT0_DS_SMP_TIMEOUT (0x00000010) +#define MPI2_SASIOUNIT0_DS_MULTIPLE_PORTS (0x00000004) +#define MPI2_SASIOUNIT0_DS_UNADDRESSABLE_DEVICE (0x00000002) +#define MPI2_SASIOUNIT0_DS_LOOP_DETECTED (0x00000001) + + +/* SAS IO Unit Page 1 */ + +typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA +{ + U8 Port; /* 0x00 */ + U8 PortFlags; /* 0x01 */ + U8 PhyFlags; /* 0x02 */ + U8 MaxMinLinkRate; /* 0x03 */ + U32 ControllerPhyDeviceInfo; /* 0x04 */ + U16 MaxTargetPortConnectTime; /* 0x08 */ + U16 Reserved1; /* 0x0A */ +} MPI2_SAS_IO_UNIT1_PHY_DATA, MPI2_POINTER PTR_MPI2_SAS_IO_UNIT1_PHY_DATA, + Mpi2SasIOUnit1PhyData_t, MPI2_POINTER pMpi2SasIOUnit1PhyData_t; + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.ExtPageLength or NumPhys at runtime. + */ +#ifndef MPI2_SAS_IOUNIT1_PHY_MAX +#define MPI2_SAS_IOUNIT1_PHY_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U16 ControlFlags; /* 0x08 */ + U16 SASNarrowMaxQueueDepth; /* 0x0A */ + U16 AdditionalControlFlags; /* 0x0C */ + U16 SASWideMaxQueueDepth; /* 0x0E */ + U8 NumPhys; /* 0x10 */ + U8 SATAMaxQDepth; /* 0x11 */ + U8 ReportDeviceMissingDelay; /* 0x12 */ + U8 IODeviceMissingDelay; /* 0x13 */ + MPI2_SAS_IO_UNIT1_PHY_DATA PhyData[MPI2_SAS_IOUNIT1_PHY_MAX]; /* 0x14 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_1, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_1, + Mpi2SasIOUnitPage1_t, MPI2_POINTER pMpi2SasIOUnitPage1_t; + +#define MPI2_SASIOUNITPAGE1_PAGEVERSION (0x09) + +/* values for SAS IO Unit Page 1 ControlFlags */ +#define MPI2_SASIOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000) +#define MPI2_SASIOUNIT1_CONTROL_SATA_3_0_MAX (0x4000) +#define MPI2_SASIOUNIT1_CONTROL_SATA_1_5_MAX (0x2000) +#define MPI2_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000) + +#define MPI2_SASIOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600) +#define MPI2_SASIOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9) +#define MPI2_SASIOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x0) +#define MPI2_SASIOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x1) +#define MPI2_SASIOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x2) + +#define MPI2_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080) +#define MPI2_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040) +#define MPI2_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020) +#define MPI2_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010) +#define MPI2_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL (0x0008) +#define MPI2_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004) +#define MPI2_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002) +#define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001) + +/* values for SAS IO Unit Page 1 AdditionalControlFlags */ +#define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080) +#define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040) +#define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020) +#define MPI2_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010) +#define MPI2_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008) +#define MPI2_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004) +#define MPI2_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002) +#define MPI2_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001) + +/* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */ +#define MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F) +#define MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16 (0x80) + +/* values for SAS IO Unit Page 1 PortFlags */ +#define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) + +/* values for SAS IO Unit Page 2 PhyFlags */ +#define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10) +#define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08) + +/* values for SAS IO Unit Page 0 MaxMinLinkRate */ +#define MPI2_SASIOUNIT1_MAX_RATE_MASK (0xF0) +#define MPI2_SASIOUNIT1_MAX_RATE_1_5 (0x80) +#define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90) +#define MPI2_SASIOUNIT1_MAX_RATE_6_0 (0xA0) +#define MPI2_SASIOUNIT1_MIN_RATE_MASK (0x0F) +#define MPI2_SASIOUNIT1_MIN_RATE_1_5 (0x08) +#define MPI2_SASIOUNIT1_MIN_RATE_3_0 (0x09) +#define MPI2_SASIOUNIT1_MIN_RATE_6_0 (0x0A) + +/* see mpi2_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */ + + +/* SAS IO Unit Page 4 */ + +typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP +{ + U8 MaxTargetSpinup; /* 0x00 */ + U8 SpinupDelay; /* 0x01 */ + U16 Reserved1; /* 0x02 */ +} MPI2_SAS_IOUNIT4_SPINUP_GROUP, MPI2_POINTER PTR_MPI2_SAS_IOUNIT4_SPINUP_GROUP, + Mpi2SasIOUnit4SpinupGroup_t, MPI2_POINTER pMpi2SasIOUnit4SpinupGroup_t; + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * four and check Header.ExtPageLength or NumPhys at runtime. + */ +#ifndef MPI2_SAS_IOUNIT4_PHY_MAX +#define MPI2_SAS_IOUNIT4_PHY_MAX (4) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + MPI2_SAS_IOUNIT4_SPINUP_GROUP SpinupGroupParameters[4]; /* 0x08 */ + U32 Reserved1; /* 0x18 */ + U32 Reserved2; /* 0x1C */ + U32 Reserved3; /* 0x20 */ + U8 BootDeviceWaitTime; /* 0x24 */ + U8 Reserved4; /* 0x25 */ + U16 Reserved5; /* 0x26 */ + U8 NumPhys; /* 0x28 */ + U8 PEInitialSpinupDelay; /* 0x29 */ + U8 PEReplyDelay; /* 0x2A */ + U8 Flags; /* 0x2B */ + U8 PHY[MPI2_SAS_IOUNIT4_PHY_MAX]; /* 0x2C */ +} MPI2_CONFIG_PAGE_SASIOUNIT_4, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_4, + Mpi2SasIOUnitPage4_t, MPI2_POINTER pMpi2SasIOUnitPage4_t; + +#define MPI2_SASIOUNITPAGE4_PAGEVERSION (0x02) + +/* defines for Flags field */ +#define MPI2_SASIOUNIT4_FLAGS_AUTO_PORTENABLE (0x01) + +/* defines for PHY field */ +#define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK (0x03) + + +/**************************************************************************** +* SAS Expander Config Pages +****************************************************************************/ + +/* SAS Expander Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U8 PhysicalPort; /* 0x08 */ + U8 ReportGenLength; /* 0x09 */ + U16 EnclosureHandle; /* 0x0A */ + U64 SASAddress; /* 0x0C */ + U32 DiscoveryStatus; /* 0x14 */ + U16 DevHandle; /* 0x18 */ + U16 ParentDevHandle; /* 0x1A */ + U16 ExpanderChangeCount; /* 0x1C */ + U16 ExpanderRouteIndexes; /* 0x1E */ + U8 NumPhys; /* 0x20 */ + U8 SASLevel; /* 0x21 */ + U16 Flags; /* 0x22 */ + U16 STPBusInactivityTimeLimit; /* 0x24 */ + U16 STPMaxConnectTimeLimit; /* 0x26 */ + U16 STP_SMP_NexusLossTime; /* 0x28 */ + U16 MaxNumRoutedSasAddresses; /* 0x2A */ + U64 ActiveZoneManagerSASAddress;/* 0x2C */ + U16 ZoneLockInactivityLimit; /* 0x34 */ + U16 Reserved1; /* 0x36 */ +} MPI2_CONFIG_PAGE_EXPANDER_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_0, + Mpi2ExpanderPage0_t, MPI2_POINTER pMpi2ExpanderPage0_t; + +#define MPI2_SASEXPANDER0_PAGEVERSION (0x05) + +/* values for SAS Expander Page 0 DiscoveryStatus field */ +#define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED (0x80000000) +#define MPI2_SAS_EXPANDER0_DS_MAX_EXPANDERS_EXCEED (0x40000000) +#define MPI2_SAS_EXPANDER0_DS_MAX_DEVICES_EXCEED (0x20000000) +#define MPI2_SAS_EXPANDER0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) +#define MPI2_SAS_EXPANDER0_DS_DOWNSTREAM_INITIATOR (0x08000000) +#define MPI2_SAS_EXPANDER0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) +#define MPI2_SAS_EXPANDER0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) +#define MPI2_SAS_EXPANDER0_DS_MULTI_PORT_DOMAIN (0x00002000) +#define MPI2_SAS_EXPANDER0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) +#define MPI2_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE (0x00000800) +#define MPI2_SAS_EXPANDER0_DS_TABLE_LINK (0x00000400) +#define MPI2_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK (0x00000200) +#define MPI2_SAS_EXPANDER0_DS_SMP_CRC_ERROR (0x00000100) +#define MPI2_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED (0x00000080) +#define MPI2_SAS_EXPANDER0_DS_INDEX_NOT_EXIST (0x00000040) +#define MPI2_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES (0x00000020) +#define MPI2_SAS_EXPANDER0_DS_SMP_TIMEOUT (0x00000010) +#define MPI2_SAS_EXPANDER0_DS_MULTIPLE_PORTS (0x00000004) +#define MPI2_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE (0x00000002) +#define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001) + +/* values for SAS Expander Page 0 Flags field */ +#define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED (0x1000) +#define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800) +#define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400) +#define MPI2_SAS_EXPANDER0_FLAGS_ZONING_SUPPORT (0x0200) +#define MPI2_SAS_EXPANDER0_FLAGS_ENABLED_ZONING (0x0100) +#define MPI2_SAS_EXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT (0x0080) +#define MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x0010) +#define MPI2_SAS_EXPANDER0_FLAGS_OTHERS_CONFIG (0x0004) +#define MPI2_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x0002) +#define MPI2_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x0001) + + +/* SAS Expander Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_EXPANDER_1 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U8 PhysicalPort; /* 0x08 */ + U8 Reserved1; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U8 NumPhys; /* 0x0C */ + U8 Phy; /* 0x0D */ + U16 NumTableEntriesProgrammed; /* 0x0E */ + U8 ProgrammedLinkRate; /* 0x10 */ + U8 HwLinkRate; /* 0x11 */ + U16 AttachedDevHandle; /* 0x12 */ + U32 PhyInfo; /* 0x14 */ + U32 AttachedDeviceInfo; /* 0x18 */ + U16 ExpanderDevHandle; /* 0x1C */ + U8 ChangeCount; /* 0x1E */ + U8 NegotiatedLinkRate; /* 0x1F */ + U8 PhyIdentifier; /* 0x20 */ + U8 AttachedPhyIdentifier; /* 0x21 */ + U8 Reserved3; /* 0x22 */ + U8 DiscoveryInfo; /* 0x23 */ + U32 AttachedPhyInfo; /* 0x24 */ + U8 ZoneGroup; /* 0x28 */ + U8 SelfConfigStatus; /* 0x29 */ + U16 Reserved4; /* 0x2A */ +} MPI2_CONFIG_PAGE_EXPANDER_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_1, + Mpi2ExpanderPage1_t, MPI2_POINTER pMpi2ExpanderPage1_t; + +#define MPI2_SASEXPANDER1_PAGEVERSION (0x02) + +/* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */ + +/* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */ + +/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */ + +/* see mpi2_sas.h for the MPI2_SAS_DEVICE_INFO_ defines used for the AttachedDeviceInfo field */ + +/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + +/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ + +/* values for SAS Expander Page 1 DiscoveryInfo field */ +#define MPI2_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04) +#define MPI2_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02) +#define MPI2_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01) + + +/**************************************************************************** +* SAS Device Config Pages +****************************************************************************/ + +/* SAS Device Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U16 Slot; /* 0x08 */ + U16 EnclosureHandle; /* 0x0A */ + U64 SASAddress; /* 0x0C */ + U16 ParentDevHandle; /* 0x14 */ + U8 PhyNum; /* 0x16 */ + U8 AccessStatus; /* 0x17 */ + U16 DevHandle; /* 0x18 */ + U8 AttachedPhyIdentifier; /* 0x1A */ + U8 ZoneGroup; /* 0x1B */ + U32 DeviceInfo; /* 0x1C */ + U16 Flags; /* 0x20 */ + U8 PhysicalPort; /* 0x22 */ + U8 MaxPortConnections; /* 0x23 */ + U64 DeviceName; /* 0x24 */ + U8 PortGroups; /* 0x2C */ + U8 DmaGroup; /* 0x2D */ + U8 ControlGroup; /* 0x2E */ + U8 Reserved1; /* 0x2F */ + U32 Reserved2; /* 0x30 */ + U32 Reserved3; /* 0x34 */ +} MPI2_CONFIG_PAGE_SAS_DEV_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_0, + Mpi2SasDevicePage0_t, MPI2_POINTER pMpi2SasDevicePage0_t; + +#define MPI2_SASDEVICE0_PAGEVERSION (0x08) + +/* values for SAS Device Page 0 AccessStatus field */ +#define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00) +#define MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01) +#define MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02) +#define MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03) +#define MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION (0x04) +#define MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE (0x05) +#define MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE (0x06) +#define MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED (0x07) +/* specific values for SATA Init failures */ +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG (0x12) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x13) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x14) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN (0x15) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN (0x16) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN (0x17) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x18) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x19) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX (0x1F) + +/* see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */ + +/* values for SAS Device Page 0 Flags field */ +#define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200) +#define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010) +#define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008) +#define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001) + + +/* SAS Device Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_1 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U64 SASAddress; /* 0x0C */ + U32 Reserved2; /* 0x14 */ + U16 DevHandle; /* 0x18 */ + U16 Reserved3; /* 0x1A */ + U8 InitialRegDeviceFIS[20];/* 0x1C */ +} MPI2_CONFIG_PAGE_SAS_DEV_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_1, + Mpi2SasDevicePage1_t, MPI2_POINTER pMpi2SasDevicePage1_t; + +#define MPI2_SASDEVICE1_PAGEVERSION (0x01) + + +/**************************************************************************** +* SAS PHY Config Pages +****************************************************************************/ + +/* SAS PHY Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U16 OwnerDevHandle; /* 0x08 */ + U16 Reserved1; /* 0x0A */ + U16 AttachedDevHandle; /* 0x0C */ + U8 AttachedPhyIdentifier; /* 0x0E */ + U8 Reserved2; /* 0x0F */ + U32 AttachedPhyInfo; /* 0x10 */ + U8 ProgrammedLinkRate; /* 0x14 */ + U8 HwLinkRate; /* 0x15 */ + U8 ChangeCount; /* 0x16 */ + U8 Flags; /* 0x17 */ + U32 PhyInfo; /* 0x18 */ + U8 NegotiatedLinkRate; /* 0x1C */ + U8 Reserved3; /* 0x1D */ + U16 Reserved4; /* 0x1E */ +} MPI2_CONFIG_PAGE_SAS_PHY_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_0, + Mpi2SasPhyPage0_t, MPI2_POINTER pMpi2SasPhyPage0_t; + +#define MPI2_SASPHY0_PAGEVERSION (0x03) + +/* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */ + +/* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */ + +/* values for SAS PHY Page 0 Flags field */ +#define MPI2_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01) + +/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ + +/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + +/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */ + + +/* SAS PHY Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U32 InvalidDwordCount; /* 0x0C */ + U32 RunningDisparityErrorCount; /* 0x10 */ + U32 LossDwordSynchCount; /* 0x14 */ + U32 PhyResetProblemCount; /* 0x18 */ +} MPI2_CONFIG_PAGE_SAS_PHY_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_1, + Mpi2SasPhyPage1_t, MPI2_POINTER pMpi2SasPhyPage1_t; + +#define MPI2_SASPHY1_PAGEVERSION (0x01) + + +/**************************************************************************** +* SAS Port Config Pages +****************************************************************************/ + +/* SAS Port Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U8 PortNumber; /* 0x08 */ + U8 PhysicalPort; /* 0x09 */ + U8 PortWidth; /* 0x0A */ + U8 PhysicalPortWidth; /* 0x0B */ + U8 ZoneGroup; /* 0x0C */ + U8 Reserved1; /* 0x0D */ + U16 Reserved2; /* 0x0E */ + U64 SASAddress; /* 0x10 */ + U32 DeviceInfo; /* 0x18 */ + U32 Reserved3; /* 0x1C */ + U32 Reserved4; /* 0x20 */ +} MPI2_CONFIG_PAGE_SAS_PORT_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PORT_0, + Mpi2SasPortPage0_t, MPI2_POINTER pMpi2SasPortPage0_t; + +#define MPI2_SASPORT0_PAGEVERSION (0x00) + +/* see mpi2_sas.h for values for SAS Port Page 0 DeviceInfo values */ + + +/**************************************************************************** +* SAS Enclosure Config Pages +****************************************************************************/ + +/* SAS Enclosure Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U64 EnclosureLogicalID; /* 0x0C */ + U16 Flags; /* 0x14 */ + U16 EnclosureHandle; /* 0x16 */ + U16 NumSlots; /* 0x18 */ + U16 StartSlot; /* 0x1A */ + U16 Reserved2; /* 0x1C */ + U16 SEPDevHandle; /* 0x1E */ + U32 Reserved3; /* 0x20 */ + U32 Reserved4; /* 0x24 */ +} MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, + Mpi2SasEnclosurePage0_t, MPI2_POINTER pMpi2SasEnclosurePage0_t; + +#define MPI2_SASENCLOSURE0_PAGEVERSION (0x03) + +/* values for SAS Enclosure Page 0 Flags field */ +#define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES (0x0001) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005) + + +/**************************************************************************** +* Log Config Page +****************************************************************************/ + +/* Log Page 0 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.ExtPageLength or NumPhys at runtime. + */ +#ifndef MPI2_LOG_0_NUM_LOG_ENTRIES +#define MPI2_LOG_0_NUM_LOG_ENTRIES (1) +#endif + +#define MPI2_LOG_0_LOG_DATA_LENGTH (0x1C) + +typedef struct _MPI2_LOG_0_ENTRY +{ + U64 TimeStamp; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U16 LogSequence; /* 0x0C */ + U16 LogEntryQualifier; /* 0x0E */ + U8 VP_ID; /* 0x10 */ + U8 VF_ID; /* 0x11 */ + U16 Reserved2; /* 0x12 */ + U8 LogData[MPI2_LOG_0_LOG_DATA_LENGTH];/* 0x14 */ +} MPI2_LOG_0_ENTRY, MPI2_POINTER PTR_MPI2_LOG_0_ENTRY, + Mpi2Log0Entry_t, MPI2_POINTER pMpi2Log0Entry_t; + +/* values for Log Page 0 LogEntry LogEntryQualifier field */ +#define MPI2_LOG_0_ENTRY_QUAL_ENTRY_UNUSED (0x0000) +#define MPI2_LOG_0_ENTRY_QUAL_POWER_ON_RESET (0x0001) +#define MPI2_LOG_0_ENTRY_QUAL_TIMESTAMP_UPDATE (0x0002) +#define MPI2_LOG_0_ENTRY_QUAL_MIN_IMPLEMENT_SPEC (0x8000) +#define MPI2_LOG_0_ENTRY_QUAL_MAX_IMPLEMENT_SPEC (0xFFFF) + +typedef struct _MPI2_CONFIG_PAGE_LOG_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U32 Reserved2; /* 0x0C */ + U16 NumLogEntries; /* 0x10 */ + U16 Reserved3; /* 0x12 */ + MPI2_LOG_0_ENTRY LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /* 0x14 */ +} MPI2_CONFIG_PAGE_LOG_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_LOG_0, + Mpi2LogPage0_t, MPI2_POINTER pMpi2LogPage0_t; + +#define MPI2_LOG_0_PAGEVERSION (0x02) + + +/**************************************************************************** +* RAID Config Page +****************************************************************************/ + +/* RAID Page 0 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.ExtPageLength or NumPhys at runtime. + */ +#ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS +#define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1) +#endif + +typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT +{ + U16 ElementFlags; /* 0x00 */ + U16 VolDevHandle; /* 0x02 */ + U8 HotSparePool; /* 0x04 */ + U8 PhysDiskNum; /* 0x05 */ + U16 PhysDiskDevHandle; /* 0x06 */ +} MPI2_RAIDCONFIG0_CONFIG_ELEMENT, + MPI2_POINTER PTR_MPI2_RAIDCONFIG0_CONFIG_ELEMENT, + Mpi2RaidConfig0ConfigElement_t, MPI2_POINTER pMpi2RaidConfig0ConfigElement_t; + +/* values for the ElementFlags field */ +#define MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE (0x000F) +#define MPI2_RAIDCONFIG0_EFLAGS_VOLUME_ELEMENT (0x0000) +#define MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT (0x0001) +#define MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT (0x0002) +#define MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT (0x0003) + + +typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U8 NumHotSpares; /* 0x08 */ + U8 NumPhysDisks; /* 0x09 */ + U8 NumVolumes; /* 0x0A */ + U8 ConfigNum; /* 0x0B */ + U32 Flags; /* 0x0C */ + U8 ConfigGUID[24]; /* 0x10 */ + U32 Reserved1; /* 0x28 */ + U8 NumElements; /* 0x2C */ + U8 Reserved2; /* 0x2D */ + U16 Reserved3; /* 0x2E */ + MPI2_RAIDCONFIG0_CONFIG_ELEMENT ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /* 0x30 */ +} MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0, + Mpi2RaidConfigurationPage0_t, MPI2_POINTER pMpi2RaidConfigurationPage0_t; + +#define MPI2_RAIDCONFIG0_PAGEVERSION (0x00) + +/* values for RAID Configuration Page 0 Flags field */ +#define MPI2_RAIDCONFIG0_FLAG_FOREIGN_CONFIG (0x00000001) + + +/**************************************************************************** +* Driver Persistent Mapping Config Pages +****************************************************************************/ + +/* Driver Persistent Mapping Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY +{ + U64 PhysicalIdentifier; /* 0x00 */ + U16 MappingInformation; /* 0x08 */ + U16 DeviceIndex; /* 0x0A */ + U32 PhysicalBitsMapping; /* 0x0C */ + U32 Reserved1; /* 0x10 */ +} MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY, + Mpi2DriverMap0Entry_t, MPI2_POINTER pMpi2DriverMap0Entry_t; + +typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY Entry; /* 0x08 */ +} MPI2_CONFIG_PAGE_DRIVER_MAPPING_0, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_DRIVER_MAPPING_0, + Mpi2DriverMappingPage0_t, MPI2_POINTER pMpi2DriverMappingPage0_t; + +#define MPI2_DRIVERMAPPING0_PAGEVERSION (0x00) + +/* values for Driver Persistent Mapping Page 0 MappingInformation field */ +#define MPI2_DRVMAP0_MAPINFO_SLOT_MASK (0x07F0) +#define MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT (4) +#define MPI2_DRVMAP0_MAPINFO_MISSING_MASK (0x000F) + + +#endif + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_init.h b/drivers/scsi/mpt2sas/mpi/mpi2_init.h new file mode 100644 index 00000000000..f1115f0f0eb --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2_init.h @@ -0,0 +1,420 @@ +/* + * Copyright (c) 2000-2008 LSI Corporation. + * + * + * Name: mpi2_init.h + * Title: MPI SCSI initiator mode messages and structures + * Creation Date: June 23, 2006 + * + * mpi2_init.h Version: 02.00.06 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t. + * 12-18-07 02.00.02 Modified Task Management Target Reset Method defines. + * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention. + * 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY. + * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t. + * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO + * Control field Task Attribute flags. + * Moved LUN field defines to mpi2.h becasue they are + * common to many structures. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_INIT_H +#define MPI2_INIT_H + +/***************************************************************************** +* +* SCSI Initiator Messages +* +*****************************************************************************/ + +/**************************************************************************** +* SCSI IO messages and associated structures +****************************************************************************/ + +typedef struct +{ + U8 CDB[20]; /* 0x00 */ + U32 PrimaryReferenceTag; /* 0x14 */ + U16 PrimaryApplicationTag; /* 0x18 */ + U16 PrimaryApplicationTagMask; /* 0x1A */ + U32 TransferLength; /* 0x1C */ +} MPI2_SCSI_IO_CDB_EEDP32, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_EEDP32, + Mpi2ScsiIoCdbEedp32_t, MPI2_POINTER pMpi2ScsiIoCdbEedp32_t; + +/* TBD: I don't think this is needed for MPI2/Gen2 */ +#if 0 +typedef struct +{ + U8 CDB[16]; /* 0x00 */ + U32 DataLength; /* 0x10 */ + U32 PrimaryReferenceTag; /* 0x14 */ + U16 PrimaryApplicationTag; /* 0x18 */ + U16 PrimaryApplicationTagMask; /* 0x1A */ + U32 TransferLength; /* 0x1C */ +} MPI2_SCSI_IO32_CDB_EEDP16, MPI2_POINTER PTR_MPI2_SCSI_IO32_CDB_EEDP16, + Mpi2ScsiIo32CdbEedp16_t, MPI2_POINTER pMpi2ScsiIo32CdbEedp16_t; +#endif + +typedef union +{ + U8 CDB32[32]; + MPI2_SCSI_IO_CDB_EEDP32 EEDP32; + MPI2_SGE_SIMPLE_UNION SGE; +} MPI2_SCSI_IO_CDB_UNION, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_UNION, + Mpi2ScsiIoCdb_t, MPI2_POINTER pMpi2ScsiIoCdb_t; + +/* SCSI IO Request Message */ +typedef struct _MPI2_SCSI_IO_REQUEST +{ + U16 DevHandle; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved1; /* 0x04 */ + U8 Reserved2; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U32 SenseBufferLowAddress; /* 0x0C */ + U16 SGLFlags; /* 0x10 */ + U8 SenseBufferLength; /* 0x12 */ + U8 Reserved4; /* 0x13 */ + U8 SGLOffset0; /* 0x14 */ + U8 SGLOffset1; /* 0x15 */ + U8 SGLOffset2; /* 0x16 */ + U8 SGLOffset3; /* 0x17 */ + U32 SkipCount; /* 0x18 */ + U32 DataLength; /* 0x1C */ + U32 BidirectionalDataLength; /* 0x20 */ + U16 IoFlags; /* 0x24 */ + U16 EEDPFlags; /* 0x26 */ + U32 EEDPBlockSize; /* 0x28 */ + U32 SecondaryReferenceTag; /* 0x2C */ + U16 SecondaryApplicationTag; /* 0x30 */ + U16 ApplicationTagTranslationMask; /* 0x32 */ + U8 LUN[8]; /* 0x34 */ + U32 Control; /* 0x3C */ + MPI2_SCSI_IO_CDB_UNION CDB; /* 0x40 */ + MPI2_SGE_IO_UNION SGL; /* 0x60 */ +} MPI2_SCSI_IO_REQUEST, MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST, + Mpi2SCSIIORequest_t, MPI2_POINTER pMpi2SCSIIORequest_t; + +/* SCSI IO MsgFlags bits */ + +/* MsgFlags for SenseBufferAddressSpace */ +#define MPI2_SCSIIO_MSGFLAGS_MASK_SENSE_ADDR (0x0C) +#define MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR (0x00) +#define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR (0x04) +#define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR (0x08) +#define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR (0x0C) + +/* SCSI IO SGLFlags bits */ + +/* base values for Data Location Address Space */ +#define MPI2_SCSIIO_SGLFLAGS_ADDR_MASK (0x0C) +#define MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR (0x00) +#define MPI2_SCSIIO_SGLFLAGS_IOCDDR_ADDR (0x04) +#define MPI2_SCSIIO_SGLFLAGS_IOCPLB_ADDR (0x08) +#define MPI2_SCSIIO_SGLFLAGS_IOCPLBNTA_ADDR (0x0C) + +/* base values for Type */ +#define MPI2_SCSIIO_SGLFLAGS_TYPE_MASK (0x03) +#define MPI2_SCSIIO_SGLFLAGS_TYPE_MPI (0x00) +#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE32 (0x01) +#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE64 (0x02) + +/* shift values for each sub-field */ +#define MPI2_SCSIIO_SGLFLAGS_SGL3_SHIFT (12) +#define MPI2_SCSIIO_SGLFLAGS_SGL2_SHIFT (8) +#define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT (4) +#define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT (0) + +/* SCSI IO IoFlags bits */ + +/* Large CDB Address Space */ +#define MPI2_SCSIIO_CDB_ADDR_MASK (0x6000) +#define MPI2_SCSIIO_CDB_ADDR_SYSTEM (0x0000) +#define MPI2_SCSIIO_CDB_ADDR_IOCDDR (0x2000) +#define MPI2_SCSIIO_CDB_ADDR_IOCPLB (0x4000) +#define MPI2_SCSIIO_CDB_ADDR_IOCPLBNTA (0x6000) + +#define MPI2_SCSIIO_IOFLAGS_LARGE_CDB (0x1000) +#define MPI2_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800) +#define MPI2_SCSIIO_IOFLAGS_MULTICAST (0x0400) +#define MPI2_SCSIIO_IOFLAGS_CMD_DETERMINES_DATA_DIR (0x0200) +#define MPI2_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF) + +/* SCSI IO EEDPFlags bits */ + +#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG (0x8000) +#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_REFTAG (0x4000) +#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG (0x2000) +#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_APPTAG (0x1000) + +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG (0x0400) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG (0x0200) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD (0x0100) + +#define MPI2_SCSIIO_EEDPFLAGS_PASSTHRU_REFTAG (0x0008) + +#define MPI2_SCSIIO_EEDPFLAGS_MASK_OP (0x0007) +#define MPI2_SCSIIO_EEDPFLAGS_NOOP_OP (0x0000) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_OP (0x0001) +#define MPI2_SCSIIO_EEDPFLAGS_STRIP_OP (0x0002) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP (0x0003) +#define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP (0x0004) +#define MPI2_SCSIIO_EEDPFLAGS_REPLACE_OP (0x0006) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REGEN_OP (0x0007) + +/* SCSI IO LUN fields: use MPI2_LUN_ from mpi2.h */ + +/* SCSI IO Control bits */ +#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK (0xFC000000) +#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26) + +#define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000) +#define MPI2_SCSIIO_CONTROL_NODATATRANSFER (0x00000000) +#define MPI2_SCSIIO_CONTROL_WRITE (0x01000000) +#define MPI2_SCSIIO_CONTROL_READ (0x02000000) +#define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL (0x03000000) + +#define MPI2_SCSIIO_CONTROL_TASKPRI_MASK (0x00007800) +#define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT (11) + +#define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700) +#define MPI2_SCSIIO_CONTROL_SIMPLEQ (0x00000000) +#define MPI2_SCSIIO_CONTROL_HEADOFQ (0x00000100) +#define MPI2_SCSIIO_CONTROL_ORDEREDQ (0x00000200) +#define MPI2_SCSIIO_CONTROL_ACAQ (0x00000400) + +#define MPI2_SCSIIO_CONTROL_TLR_MASK (0x000000C0) +#define MPI2_SCSIIO_CONTROL_NO_TLR (0x00000000) +#define MPI2_SCSIIO_CONTROL_TLR_ON (0x00000040) +#define MPI2_SCSIIO_CONTROL_TLR_OFF (0x00000080) + + +/* SCSI IO Error Reply Message */ +typedef struct _MPI2_SCSI_IO_REPLY +{ + U16 DevHandle; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved1; /* 0x04 */ + U8 Reserved2; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U8 SCSIStatus; /* 0x0C */ + U8 SCSIState; /* 0x0D */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U32 TransferCount; /* 0x14 */ + U32 SenseCount; /* 0x18 */ + U32 ResponseInfo; /* 0x1C */ + U16 TaskTag; /* 0x20 */ + U16 Reserved4; /* 0x22 */ + U32 BidirectionalTransferCount; /* 0x24 */ + U32 Reserved5; /* 0x28 */ + U32 Reserved6; /* 0x2C */ +} MPI2_SCSI_IO_REPLY, MPI2_POINTER PTR_MPI2_SCSI_IO_REPLY, + Mpi2SCSIIOReply_t, MPI2_POINTER pMpi2SCSIIOReply_t; + +/* SCSI IO Reply SCSIStatus values (SAM-4 status codes) */ + +#define MPI2_SCSI_STATUS_GOOD (0x00) +#define MPI2_SCSI_STATUS_CHECK_CONDITION (0x02) +#define MPI2_SCSI_STATUS_CONDITION_MET (0x04) +#define MPI2_SCSI_STATUS_BUSY (0x08) +#define MPI2_SCSI_STATUS_INTERMEDIATE (0x10) +#define MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14) +#define MPI2_SCSI_STATUS_RESERVATION_CONFLICT (0x18) +#define MPI2_SCSI_STATUS_COMMAND_TERMINATED (0x22) /* obsolete */ +#define MPI2_SCSI_STATUS_TASK_SET_FULL (0x28) +#define MPI2_SCSI_STATUS_ACA_ACTIVE (0x30) +#define MPI2_SCSI_STATUS_TASK_ABORTED (0x40) + +/* SCSI IO Reply SCSIState flags */ + +#define MPI2_SCSI_STATE_RESPONSE_INFO_VALID (0x10) +#define MPI2_SCSI_STATE_TERMINATED (0x08) +#define MPI2_SCSI_STATE_NO_SCSI_STATUS (0x04) +#define MPI2_SCSI_STATE_AUTOSENSE_FAILED (0x02) +#define MPI2_SCSI_STATE_AUTOSENSE_VALID (0x01) + +#define MPI2_SCSI_TASKTAG_UNKNOWN (0xFFFF) + + +/**************************************************************************** +* SCSI Task Management messages +****************************************************************************/ + +/* SCSI Task Management Request Message */ +typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST +{ + U16 DevHandle; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U8 Reserved1; /* 0x04 */ + U8 TaskType; /* 0x05 */ + U8 Reserved2; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U8 LUN[8]; /* 0x0C */ + U32 Reserved4[7]; /* 0x14 */ + U16 TaskMID; /* 0x30 */ + U16 Reserved5; /* 0x32 */ +} MPI2_SCSI_TASK_MANAGE_REQUEST, + MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REQUEST, + Mpi2SCSITaskManagementRequest_t, + MPI2_POINTER pMpi2SCSITaskManagementRequest_t; + +/* TaskType values */ + +#define MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01) +#define MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02) +#define MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03) +#define MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05) +#define MPI2_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06) +#define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07) +#define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08) +#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET (0x09) +#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION (0x0A) + +/* MsgFlags bits */ + +#define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET (0x18) +#define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET (0x00) +#define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST (0x08) +#define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET (0x10) + +#define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01) + + + +/* SCSI Task Management Reply Message */ +typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY +{ + U16 DevHandle; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U8 ResponseCode; /* 0x04 */ + U8 TaskType; /* 0x05 */ + U8 Reserved1; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U16 Reserved3; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U32 TerminationCount; /* 0x14 */ +} MPI2_SCSI_TASK_MANAGE_REPLY, + MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REPLY, + Mpi2SCSITaskManagementReply_t, MPI2_POINTER pMpi2SCSIManagementReply_t; + +/* ResponseCode values */ + +#define MPI2_SCSITASKMGMT_RSP_TM_COMPLETE (0x00) +#define MPI2_SCSITASKMGMT_RSP_INVALID_FRAME (0x02) +#define MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED (0x04) +#define MPI2_SCSITASKMGMT_RSP_TM_FAILED (0x05) +#define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08) +#define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09) +#define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80) + + +/**************************************************************************** +* SCSI Enclosure Processor messages +****************************************************************************/ + +/* SCSI Enclosure Processor Request Message */ +typedef struct _MPI2_SEP_REQUEST +{ + U16 DevHandle; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U8 Action; /* 0x04 */ + U8 Flags; /* 0x05 */ + U8 Reserved1; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U32 SlotStatus; /* 0x0C */ + U32 Reserved3; /* 0x10 */ + U32 Reserved4; /* 0x14 */ + U32 Reserved5; /* 0x18 */ + U16 Slot; /* 0x1C */ + U16 EnclosureHandle; /* 0x1E */ +} MPI2_SEP_REQUEST, MPI2_POINTER PTR_MPI2_SEP_REQUEST, + Mpi2SepRequest_t, MPI2_POINTER pMpi2SepRequest_t; + +/* Action defines */ +#define MPI2_SEP_REQ_ACTION_WRITE_STATUS (0x00) +#define MPI2_SEP_REQ_ACTION_READ_STATUS (0x01) + +/* Flags defines */ +#define MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS (0x00) +#define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01) + +/* SlotStatus defines */ +#define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000) +#define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) +#define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200) +#define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100) +#define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080) +#define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040) +#define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004) +#define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002) +#define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001) + + +/* SCSI Enclosure Processor Reply Message */ +typedef struct _MPI2_SEP_REPLY +{ + U16 DevHandle; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U8 Action; /* 0x04 */ + U8 Flags; /* 0x05 */ + U8 Reserved1; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U16 Reserved3; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U32 SlotStatus; /* 0x14 */ + U32 Reserved4; /* 0x18 */ + U16 Slot; /* 0x1C */ + U16 EnclosureHandle; /* 0x1E */ +} MPI2_SEP_REPLY, MPI2_POINTER PTR_MPI2_SEP_REPLY, + Mpi2SepReply_t, MPI2_POINTER pMpi2SepReply_t; + +/* SlotStatus defines */ +#define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000) +#define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) +#define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200) +#define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100) +#define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080) +#define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040) +#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004) +#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002) +#define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001) + + +#endif + + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h new file mode 100644 index 00000000000..8c5d81870c0 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h @@ -0,0 +1,1295 @@ +/* + * Copyright (c) 2000-2009 LSI Corporation. + * + * + * Name: mpi2_ioc.h + * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages + * Creation Date: October 11, 2006 + * + * mpi2_ioc.h Version: 02.00.10 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to + * MaxTargets. + * Added TotalImageSize field to FWDownload Request. + * Added reserved words to FWUpload Request. + * 06-26-07 02.00.02 Added IR Configuration Change List Event. + * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit + * request and replaced it with + * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth. + * Replaced the MinReplyQueueDepth field of the IOCFacts + * reply with MaxReplyDescriptorPostQueueDepth. + * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum + * depth for the Reply Descriptor Post Queue. + * Added SASAddress field to Initiator Device Table + * Overflow Event data. + * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING + * for SAS Initiator Device Status Change Event data. + * Modified Reason Code defines for SAS Topology Change + * List Event data, including adding a bit for PHY Vacant + * status, and adding a mask for the Reason Code. + * Added define for + * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING. + * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID. + * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of + * the IOCFacts Reply. + * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. + * Moved MPI2_VERSION_UNION to mpi2.h. + * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks + * instead of enables, and added SASBroadcastPrimitiveMasks + * field. + * Added Log Entry Added Event and related structure. + * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID. + * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET. + * Added MaxVolumes and MaxPersistentEntries fields to + * IOCFacts reply. + * Added ProtocalFlags and IOCCapabilities fields to + * MPI2_FW_IMAGE_HEADER. + * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT. + * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to + * a U16 (from a U32). + * Removed extra 's' from EventMasks name. + * 06-27-08 02.00.08 Fixed an offset in a comment. + * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST. + * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and + * renamed MinReplyFrameSize to ReplyFrameSize. + * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX. + * Added two new RAIDOperation values for Integrated RAID + * Operations Status Event data. + * Added four new IR Configuration Change List Event data + * ReasonCode values. + * Added two new ReasonCode defines for SAS Device Status + * Change Event data. + * Added three new DiscoveryStatus bits for the SAS + * Discovery event data. + * Added Multiplexing Status Change bit to the PhyStatus + * field of the SAS Topology Change List event data. + * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY. + * BootFlags are now product-specific. + * Added defines for the indivdual signature bytes + * for MPI2_INIT_IMAGE_FOOTER. + * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define. + * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR + * define. + * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE + * define. + * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_IOC_H +#define MPI2_IOC_H + +/***************************************************************************** +* +* IOC Messages +* +*****************************************************************************/ + +/**************************************************************************** +* IOCInit message +****************************************************************************/ + +/* IOCInit Request message */ +typedef struct _MPI2_IOC_INIT_REQUEST +{ + U8 WhoInit; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 MsgVersion; /* 0x0C */ + U16 HeaderVersion; /* 0x0E */ + U32 Reserved5; /* 0x10 */ + U32 Reserved6; /* 0x14 */ + U16 Reserved7; /* 0x18 */ + U16 SystemRequestFrameSize; /* 0x1A */ + U16 ReplyDescriptorPostQueueDepth; /* 0x1C */ + U16 ReplyFreeQueueDepth; /* 0x1E */ + U32 SenseBufferAddressHigh; /* 0x20 */ + U32 SystemReplyAddressHigh; /* 0x24 */ + U64 SystemRequestFrameBaseAddress; /* 0x28 */ + U64 ReplyDescriptorPostQueueAddress;/* 0x30 */ + U64 ReplyFreeQueueAddress; /* 0x38 */ + U64 TimeStamp; /* 0x40 */ +} MPI2_IOC_INIT_REQUEST, MPI2_POINTER PTR_MPI2_IOC_INIT_REQUEST, + Mpi2IOCInitRequest_t, MPI2_POINTER pMpi2IOCInitRequest_t; + +/* WhoInit values */ +#define MPI2_WHOINIT_NOT_INITIALIZED (0x00) +#define MPI2_WHOINIT_SYSTEM_BIOS (0x01) +#define MPI2_WHOINIT_ROM_BIOS (0x02) +#define MPI2_WHOINIT_PCI_PEER (0x03) +#define MPI2_WHOINIT_HOST_DRIVER (0x04) +#define MPI2_WHOINIT_MANUFACTURER (0x05) + +/* MsgVersion */ +#define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK (0xFF00) +#define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT (8) +#define MPI2_IOCINIT_MSGVERSION_MINOR_MASK (0x00FF) +#define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT (0) + +/* HeaderVersion */ +#define MPI2_IOCINIT_HDRVERSION_UNIT_MASK (0xFF00) +#define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT (8) +#define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF) +#define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0) + +/* minimum depth for the Reply Descriptor Post Queue */ +#define MPI2_RDPQ_DEPTH_MIN (16) + + +/* IOCInit Reply message */ +typedef struct _MPI2_IOC_INIT_REPLY +{ + U8 WhoInit; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_IOC_INIT_REPLY, MPI2_POINTER PTR_MPI2_IOC_INIT_REPLY, + Mpi2IOCInitReply_t, MPI2_POINTER pMpi2IOCInitReply_t; + + +/**************************************************************************** +* IOCFacts message +****************************************************************************/ + +/* IOCFacts Request message */ +typedef struct _MPI2_IOC_FACTS_REQUEST +{ + U16 Reserved1; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ +} MPI2_IOC_FACTS_REQUEST, MPI2_POINTER PTR_MPI2_IOC_FACTS_REQUEST, + Mpi2IOCFactsRequest_t, MPI2_POINTER pMpi2IOCFactsRequest_t; + + +/* IOCFacts Reply message */ +typedef struct _MPI2_IOC_FACTS_REPLY +{ + U16 MsgVersion; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 HeaderVersion; /* 0x04 */ + U8 IOCNumber; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U16 IOCExceptions; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U8 MaxChainDepth; /* 0x14 */ + U8 WhoInit; /* 0x15 */ + U8 NumberOfPorts; /* 0x16 */ + U8 Reserved2; /* 0x17 */ + U16 RequestCredit; /* 0x18 */ + U16 ProductID; /* 0x1A */ + U32 IOCCapabilities; /* 0x1C */ + MPI2_VERSION_UNION FWVersion; /* 0x20 */ + U16 IOCRequestFrameSize; /* 0x24 */ + U16 Reserved3; /* 0x26 */ + U16 MaxInitiators; /* 0x28 */ + U16 MaxTargets; /* 0x2A */ + U16 MaxSasExpanders; /* 0x2C */ + U16 MaxEnclosures; /* 0x2E */ + U16 ProtocolFlags; /* 0x30 */ + U16 HighPriorityCredit; /* 0x32 */ + U16 MaxReplyDescriptorPostQueueDepth; /* 0x34 */ + U8 ReplyFrameSize; /* 0x36 */ + U8 MaxVolumes; /* 0x37 */ + U16 MaxDevHandle; /* 0x38 */ + U16 MaxPersistentEntries; /* 0x3A */ + U32 Reserved4; /* 0x3C */ +} MPI2_IOC_FACTS_REPLY, MPI2_POINTER PTR_MPI2_IOC_FACTS_REPLY, + Mpi2IOCFactsReply_t, MPI2_POINTER pMpi2IOCFactsReply_t; + +/* MsgVersion */ +#define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00) +#define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT (8) +#define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF) +#define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT (0) + +/* HeaderVersion */ +#define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK (0xFF00) +#define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT (8) +#define MPI2_IOCFACTS_HDRVERSION_DEV_MASK (0x00FF) +#define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0) + +/* IOCExceptions */ +#define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100) + +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0) +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD (0x0000) +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP (0x0020) +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED (0x0040) +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP (0x0060) + +#define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010) +#define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0008) +#define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004) +#define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002) +#define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001) + +/* defines for WhoInit field are after the IOCInit Request */ + +/* ProductID field uses MPI2_FW_HEADER_PID_ */ + +/* IOCCapabilities */ +#define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000) +#define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000) +#define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800) +#define MPI2_IOCFACTS_CAPABILITY_MULTICAST (0x00000100) +#define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET (0x00000080) +#define MPI2_IOCFACTS_CAPABILITY_EEDP (0x00000040) +#define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010) +#define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008) +#define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004) + +/* ProtocolFlags */ +#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001) +#define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002) + + +/**************************************************************************** +* PortFacts message +****************************************************************************/ + +/* PortFacts Request message */ +typedef struct _MPI2_PORT_FACTS_REQUEST +{ + U16 Reserved1; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 PortNumber; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ +} MPI2_PORT_FACTS_REQUEST, MPI2_POINTER PTR_MPI2_PORT_FACTS_REQUEST, + Mpi2PortFactsRequest_t, MPI2_POINTER pMpi2PortFactsRequest_t; + +/* PortFacts Reply message */ +typedef struct _MPI2_PORT_FACTS_REPLY +{ + U16 Reserved1; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 PortNumber; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U16 Reserved4; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U8 Reserved5; /* 0x14 */ + U8 PortType; /* 0x15 */ + U16 Reserved6; /* 0x16 */ + U16 MaxPostedCmdBuffers; /* 0x18 */ + U16 Reserved7; /* 0x1A */ +} MPI2_PORT_FACTS_REPLY, MPI2_POINTER PTR_MPI2_PORT_FACTS_REPLY, + Mpi2PortFactsReply_t, MPI2_POINTER pMpi2PortFactsReply_t; + +/* PortType values */ +#define MPI2_PORTFACTS_PORTTYPE_INACTIVE (0x00) +#define MPI2_PORTFACTS_PORTTYPE_FC (0x10) +#define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20) +#define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30) +#define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31) + + +/**************************************************************************** +* PortEnable message +****************************************************************************/ + +/* PortEnable Request message */ +typedef struct _MPI2_PORT_ENABLE_REQUEST +{ + U16 Reserved1; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U8 Reserved2; /* 0x04 */ + U8 PortFlags; /* 0x05 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ +} MPI2_PORT_ENABLE_REQUEST, MPI2_POINTER PTR_MPI2_PORT_ENABLE_REQUEST, + Mpi2PortEnableRequest_t, MPI2_POINTER pMpi2PortEnableRequest_t; + + +/* PortEnable Reply message */ +typedef struct _MPI2_PORT_ENABLE_REPLY +{ + U16 Reserved1; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U8 Reserved2; /* 0x04 */ + U8 PortFlags; /* 0x05 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_PORT_ENABLE_REPLY, MPI2_POINTER PTR_MPI2_PORT_ENABLE_REPLY, + Mpi2PortEnableReply_t, MPI2_POINTER pMpi2PortEnableReply_t; + + +/**************************************************************************** +* EventNotification message +****************************************************************************/ + +/* EventNotification Request message */ +#define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS (4) + +typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST +{ + U16 Reserved1; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U32 Reserved5; /* 0x0C */ + U32 Reserved6; /* 0x10 */ + U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];/* 0x14 */ + U16 SASBroadcastPrimitiveMasks; /* 0x24 */ + U16 Reserved7; /* 0x26 */ + U32 Reserved8; /* 0x28 */ +} MPI2_EVENT_NOTIFICATION_REQUEST, + MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REQUEST, + Mpi2EventNotificationRequest_t, MPI2_POINTER pMpi2EventNotificationRequest_t; + + +/* EventNotification Reply message */ +typedef struct _MPI2_EVENT_NOTIFICATION_REPLY +{ + U16 EventDataLength; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved1; /* 0x04 */ + U8 AckRequired; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U16 Reserved3; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U16 Event; /* 0x14 */ + U16 Reserved4; /* 0x16 */ + U32 EventContext; /* 0x18 */ + U32 EventData[1]; /* 0x1C */ +} MPI2_EVENT_NOTIFICATION_REPLY, MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REPLY, + Mpi2EventNotificationReply_t, MPI2_POINTER pMpi2EventNotificationReply_t; + +/* AckRequired */ +#define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00) +#define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED (0x01) + +/* Event */ +#define MPI2_EVENT_LOG_DATA (0x0001) +#define MPI2_EVENT_STATE_CHANGE (0x0002) +#define MPI2_EVENT_HARD_RESET_RECEIVED (0x0005) +#define MPI2_EVENT_EVENT_CHANGE (0x000A) +#define MPI2_EVENT_TASK_SET_FULL (0x000E) +#define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE (0x000F) +#define MPI2_EVENT_IR_OPERATION_STATUS (0x0014) +#define MPI2_EVENT_SAS_DISCOVERY (0x0016) +#define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE (0x0017) +#define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x0018) +#define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019) +#define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C) +#define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D) +#define MPI2_EVENT_IR_VOLUME (0x001E) +#define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F) +#define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020) +#define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021) + + +/* Log Entry Added Event data */ + +/* the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */ +#define MPI2_EVENT_DATA_LOG_DATA_LENGTH (0x1C) + +typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED +{ + U64 TimeStamp; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U16 LogSequence; /* 0x0C */ + U16 LogEntryQualifier; /* 0x0E */ + U8 VP_ID; /* 0x10 */ + U8 VF_ID; /* 0x11 */ + U16 Reserved2; /* 0x12 */ + U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH];/* 0x14 */ +} MPI2_EVENT_DATA_LOG_ENTRY_ADDED, + MPI2_POINTER PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED, + Mpi2EventDataLogEntryAdded_t, MPI2_POINTER pMpi2EventDataLogEntryAdded_t; + +/* Hard Reset Received Event data */ + +typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED +{ + U8 Reserved1; /* 0x00 */ + U8 Port; /* 0x01 */ + U16 Reserved2; /* 0x02 */ +} MPI2_EVENT_DATA_HARD_RESET_RECEIVED, + MPI2_POINTER PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED, + Mpi2EventDataHardResetReceived_t, + MPI2_POINTER pMpi2EventDataHardResetReceived_t; + +/* Task Set Full Event data */ + +typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL +{ + U16 DevHandle; /* 0x00 */ + U16 CurrentDepth; /* 0x02 */ +} MPI2_EVENT_DATA_TASK_SET_FULL, MPI2_POINTER PTR_MPI2_EVENT_DATA_TASK_SET_FULL, + Mpi2EventDataTaskSetFull_t, MPI2_POINTER pMpi2EventDataTaskSetFull_t; + + +/* SAS Device Status Change Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE +{ + U16 TaskTag; /* 0x00 */ + U8 ReasonCode; /* 0x02 */ + U8 Reserved1; /* 0x03 */ + U8 ASC; /* 0x04 */ + U8 ASCQ; /* 0x05 */ + U16 DevHandle; /* 0x06 */ + U32 Reserved2; /* 0x08 */ + U64 SASAddress; /* 0x0C */ + U8 LUN[8]; /* 0x14 */ +} MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, + Mpi2EventDataSasDeviceStatusChange_t, + MPI2_POINTER pMpi2EventDataSasDeviceStatusChange_t; + +/* SAS Device Status Change Event data ReasonCode values */ +#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) +#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) +#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) +#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) +#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) +#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) +#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) +#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10) + + +/* Integrated RAID Operation Status Event data */ + +typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS +{ + U16 VolDevHandle; /* 0x00 */ + U16 Reserved1; /* 0x02 */ + U8 RAIDOperation; /* 0x04 */ + U8 PercentComplete; /* 0x05 */ + U16 Reserved2; /* 0x06 */ + U32 Resereved3; /* 0x08 */ +} MPI2_EVENT_DATA_IR_OPERATION_STATUS, + MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS, + Mpi2EventDataIrOperationStatus_t, + MPI2_POINTER pMpi2EventDataIrOperationStatus_t; + +/* Integrated RAID Operation Status Event data RAIDOperation values */ +#define MPI2_EVENT_IR_RAIDOP_RESYNC (0x00) +#define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION (0x01) +#define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK (0x02) +#define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT (0x03) +#define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT (0x04) + + +/* Integrated RAID Volume Event data */ + +typedef struct _MPI2_EVENT_DATA_IR_VOLUME +{ + U16 VolDevHandle; /* 0x00 */ + U8 ReasonCode; /* 0x02 */ + U8 Reserved1; /* 0x03 */ + U32 NewValue; /* 0x04 */ + U32 PreviousValue; /* 0x08 */ +} MPI2_EVENT_DATA_IR_VOLUME, MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_VOLUME, + Mpi2EventDataIrVolume_t, MPI2_POINTER pMpi2EventDataIrVolume_t; + +/* Integrated RAID Volume Event data ReasonCode values */ +#define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED (0x01) +#define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED (0x02) +#define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED (0x03) + + +/* Integrated RAID Physical Disk Event data */ + +typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK +{ + U16 Reserved1; /* 0x00 */ + U8 ReasonCode; /* 0x02 */ + U8 PhysDiskNum; /* 0x03 */ + U16 PhysDiskDevHandle; /* 0x04 */ + U16 Reserved2; /* 0x06 */ + U16 Slot; /* 0x08 */ + U16 EnclosureHandle; /* 0x0A */ + U32 NewValue; /* 0x0C */ + U32 PreviousValue; /* 0x10 */ +} MPI2_EVENT_DATA_IR_PHYSICAL_DISK, + MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK, + Mpi2EventDataIrPhysicalDisk_t, MPI2_POINTER pMpi2EventDataIrPhysicalDisk_t; + +/* Integrated RAID Physical Disk Event data ReasonCode values */ +#define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED (0x01) +#define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED (0x02) +#define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED (0x03) + + +/* Integrated RAID Configuration Change List Event data */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check NumElements at runtime. + */ +#ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT +#define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT (1) +#endif + +typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT +{ + U16 ElementFlags; /* 0x00 */ + U16 VolDevHandle; /* 0x02 */ + U8 ReasonCode; /* 0x04 */ + U8 PhysDiskNum; /* 0x05 */ + U16 PhysDiskDevHandle; /* 0x06 */ +} MPI2_EVENT_IR_CONFIG_ELEMENT, MPI2_POINTER PTR_MPI2_EVENT_IR_CONFIG_ELEMENT, + Mpi2EventIrConfigElement_t, MPI2_POINTER pMpi2EventIrConfigElement_t; + +/* IR Configuration Change List Event data ElementFlags values */ +#define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK (0x000F) +#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT (0x0000) +#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001) +#define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT (0x0002) + +/* IR Configuration Change List Event data ReasonCode values */ +#define MPI2_EVENT_IR_CHANGE_RC_ADDED (0x01) +#define MPI2_EVENT_IR_CHANGE_RC_REMOVED (0x02) +#define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE (0x03) +#define MPI2_EVENT_IR_CHANGE_RC_HIDE (0x04) +#define MPI2_EVENT_IR_CHANGE_RC_UNHIDE (0x05) +#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED (0x06) +#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED (0x07) +#define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED (0x08) +#define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED (0x09) + +typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST +{ + U8 NumElements; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 Reserved2; /* 0x02 */ + U8 ConfigNum; /* 0x03 */ + U32 Flags; /* 0x04 */ + MPI2_EVENT_IR_CONFIG_ELEMENT ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT]; /* 0x08 */ +} MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, + MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, + Mpi2EventDataIrConfigChangeList_t, + MPI2_POINTER pMpi2EventDataIrConfigChangeList_t; + +/* IR Configuration Change List Event data Flags values */ +#define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG (0x00000001) + + +/* SAS Discovery Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY +{ + U8 Flags; /* 0x00 */ + U8 ReasonCode; /* 0x01 */ + U8 PhysicalPort; /* 0x02 */ + U8 Reserved1; /* 0x03 */ + U32 DiscoveryStatus; /* 0x04 */ +} MPI2_EVENT_DATA_SAS_DISCOVERY, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_DISCOVERY, + Mpi2EventDataSasDiscovery_t, MPI2_POINTER pMpi2EventDataSasDiscovery_t; + +/* SAS Discovery Event data Flags values */ +#define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE (0x02) +#define MPI2_EVENT_SAS_DISC_IN_PROGRESS (0x01) + +/* SAS Discovery Event data ReasonCode values */ +#define MPI2_EVENT_SAS_DISC_RC_STARTED (0x01) +#define MPI2_EVENT_SAS_DISC_RC_COMPLETED (0x02) + +/* SAS Discovery Event data DiscoveryStatus values */ +#define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED (0x80000000) +#define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED (0x40000000) +#define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED (0x20000000) +#define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) +#define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR (0x08000000) +#define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) +#define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) +#define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN (0x00002000) +#define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) +#define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE (0x00000800) +#define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK (0x00000400) +#define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK (0x00000200) +#define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR (0x00000100) +#define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED (0x00000080) +#define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST (0x00000040) +#define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES (0x00000020) +#define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT (0x00000010) +#define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS (0x00000004) +#define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE (0x00000002) +#define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED (0x00000001) + + +/* SAS Broadcast Primitive Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE +{ + U8 PhyNum; /* 0x00 */ + U8 Port; /* 0x01 */ + U8 PortWidth; /* 0x02 */ + U8 Primitive; /* 0x03 */ +} MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, + Mpi2EventDataSasBroadcastPrimitive_t, + MPI2_POINTER pMpi2EventDataSasBroadcastPrimitive_t; + +/* defines for the Primitive field */ +#define MPI2_EVENT_PRIMITIVE_CHANGE (0x01) +#define MPI2_EVENT_PRIMITIVE_SES (0x02) +#define MPI2_EVENT_PRIMITIVE_EXPANDER (0x03) +#define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04) +#define MPI2_EVENT_PRIMITIVE_RESERVED3 (0x05) +#define MPI2_EVENT_PRIMITIVE_RESERVED4 (0x06) +#define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07) +#define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08) + + +/* SAS Initiator Device Status Change Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE +{ + U8 ReasonCode; /* 0x00 */ + U8 PhysicalPort; /* 0x01 */ + U16 DevHandle; /* 0x02 */ + U64 SASAddress; /* 0x04 */ +} MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, + Mpi2EventDataSasInitDevStatusChange_t, + MPI2_POINTER pMpi2EventDataSasInitDevStatusChange_t; + +/* SAS Initiator Device Status Change event ReasonCode values */ +#define MPI2_EVENT_SAS_INIT_RC_ADDED (0x01) +#define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02) + + +/* SAS Initiator Device Table Overflow Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW +{ + U16 MaxInit; /* 0x00 */ + U16 CurrentInit; /* 0x02 */ + U64 SASAddress; /* 0x04 */ +} MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, + Mpi2EventDataSasInitTableOverflow_t, + MPI2_POINTER pMpi2EventDataSasInitTableOverflow_t; + + +/* SAS Topology Change List Event data */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check NumEntries at runtime. + */ +#ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT +#define MPI2_EVENT_SAS_TOPO_PHY_COUNT (1) +#endif + +typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY +{ + U16 AttachedDevHandle; /* 0x00 */ + U8 LinkRate; /* 0x02 */ + U8 PhyStatus; /* 0x03 */ +} MPI2_EVENT_SAS_TOPO_PHY_ENTRY, MPI2_POINTER PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY, + Mpi2EventSasTopoPhyEntry_t, MPI2_POINTER pMpi2EventSasTopoPhyEntry_t; + +typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST +{ + U16 EnclosureHandle; /* 0x00 */ + U16 ExpanderDevHandle; /* 0x02 */ + U8 NumPhys; /* 0x04 */ + U8 Reserved1; /* 0x05 */ + U16 Reserved2; /* 0x06 */ + U8 NumEntries; /* 0x08 */ + U8 StartPhyNum; /* 0x09 */ + U8 ExpStatus; /* 0x0A */ + U8 PhysicalPort; /* 0x0B */ + MPI2_EVENT_SAS_TOPO_PHY_ENTRY PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT]; /* 0x0C*/ +} MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, + Mpi2EventDataSasTopologyChangeList_t, + MPI2_POINTER pMpi2EventDataSasTopologyChangeList_t; + +/* values for the ExpStatus field */ +#define MPI2_EVENT_SAS_TOPO_ES_ADDED (0x01) +#define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02) +#define MPI2_EVENT_SAS_TOPO_ES_RESPONDING (0x03) +#define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04) + +/* defines for the LinkRate field */ +#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0) +#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4) +#define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F) +#define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT (0) + +#define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00) +#define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01) +#define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02) +#define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03) +#define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04) +#define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05) +#define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5 (0x08) +#define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09) +#define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A) + +/* values for the PhyStatus field */ +#define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80) +#define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE (0x10) +/* values for the PhyStatus ReasonCode sub-field */ +#define MPI2_EVENT_SAS_TOPO_RC_MASK (0x0F) +#define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED (0x01) +#define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING (0x02) +#define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED (0x03) +#define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE (0x04) +#define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING (0x05) + + +/* SAS Enclosure Device Status Change Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE +{ + U16 EnclosureHandle; /* 0x00 */ + U8 ReasonCode; /* 0x02 */ + U8 PhysicalPort; /* 0x03 */ + U64 EnclosureLogicalID; /* 0x04 */ + U16 NumSlots; /* 0x0C */ + U16 StartSlot; /* 0x0E */ + U32 PhyBits; /* 0x10 */ +} MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, + Mpi2EventDataSasEnclDevStatusChange_t, + MPI2_POINTER pMpi2EventDataSasEnclDevStatusChange_t; + +/* SAS Enclosure Device Status Change event ReasonCode values */ +#define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01) +#define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02) + + +/**************************************************************************** +* EventAck message +****************************************************************************/ + +/* EventAck Request message */ +typedef struct _MPI2_EVENT_ACK_REQUEST +{ + U16 Reserved1; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Event; /* 0x0C */ + U16 Reserved5; /* 0x0E */ + U32 EventContext; /* 0x10 */ +} MPI2_EVENT_ACK_REQUEST, MPI2_POINTER PTR_MPI2_EVENT_ACK_REQUEST, + Mpi2EventAckRequest_t, MPI2_POINTER pMpi2EventAckRequest_t; + + +/* EventAck Reply message */ +typedef struct _MPI2_EVENT_ACK_REPLY +{ + U16 Reserved1; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_EVENT_ACK_REPLY, MPI2_POINTER PTR_MPI2_EVENT_ACK_REPLY, + Mpi2EventAckReply_t, MPI2_POINTER pMpi2EventAckReply_t; + + +/**************************************************************************** +* FWDownload message +****************************************************************************/ + +/* FWDownload Request message */ +typedef struct _MPI2_FW_DOWNLOAD_REQUEST +{ + U8 ImageType; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U32 TotalImageSize; /* 0x0C */ + U32 Reserved5; /* 0x10 */ + MPI2_MPI_SGE_UNION SGL; /* 0x14 */ +} MPI2_FW_DOWNLOAD_REQUEST, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_REQUEST, + Mpi2FWDownloadRequest, MPI2_POINTER pMpi2FWDownloadRequest; + +#define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT (0x01) + +#define MPI2_FW_DOWNLOAD_ITYPE_FW (0x01) +#define MPI2_FW_DOWNLOAD_ITYPE_BIOS (0x02) +#define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06) +#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07) +#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08) +#define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09) +#define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) + +/* FWDownload TransactionContext Element */ +typedef struct _MPI2_FW_DOWNLOAD_TCSGE +{ + U8 Reserved1; /* 0x00 */ + U8 ContextSize; /* 0x01 */ + U8 DetailsLength; /* 0x02 */ + U8 Flags; /* 0x03 */ + U32 Reserved2; /* 0x04 */ + U32 ImageOffset; /* 0x08 */ + U32 ImageSize; /* 0x0C */ +} MPI2_FW_DOWNLOAD_TCSGE, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_TCSGE, + Mpi2FWDownloadTCSGE_t, MPI2_POINTER pMpi2FWDownloadTCSGE_t; + +/* FWDownload Reply message */ +typedef struct _MPI2_FW_DOWNLOAD_REPLY +{ + U8 ImageType; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_FW_DOWNLOAD_REPLY, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_REPLY, + Mpi2FWDownloadReply_t, MPI2_POINTER pMpi2FWDownloadReply_t; + + +/**************************************************************************** +* FWUpload message +****************************************************************************/ + +/* FWUpload Request message */ +typedef struct _MPI2_FW_UPLOAD_REQUEST +{ + U8 ImageType; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U32 Reserved5; /* 0x0C */ + U32 Reserved6; /* 0x10 */ + MPI2_MPI_SGE_UNION SGL; /* 0x14 */ +} MPI2_FW_UPLOAD_REQUEST, MPI2_POINTER PTR_MPI2_FW_UPLOAD_REQUEST, + Mpi2FWUploadRequest_t, MPI2_POINTER pMpi2FWUploadRequest_t; + +#define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT (0x00) +#define MPI2_FW_UPLOAD_ITYPE_FW_FLASH (0x01) +#define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02) +#define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP (0x05) +#define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING (0x06) +#define MPI2_FW_UPLOAD_ITYPE_CONFIG_1 (0x07) +#define MPI2_FW_UPLOAD_ITYPE_CONFIG_2 (0x08) +#define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09) +#define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A) +#define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) + +typedef struct _MPI2_FW_UPLOAD_TCSGE +{ + U8 Reserved1; /* 0x00 */ + U8 ContextSize; /* 0x01 */ + U8 DetailsLength; /* 0x02 */ + U8 Flags; /* 0x03 */ + U32 Reserved2; /* 0x04 */ + U32 ImageOffset; /* 0x08 */ + U32 ImageSize; /* 0x0C */ +} MPI2_FW_UPLOAD_TCSGE, MPI2_POINTER PTR_MPI2_FW_UPLOAD_TCSGE, + Mpi2FWUploadTCSGE_t, MPI2_POINTER pMpi2FWUploadTCSGE_t; + +/* FWUpload Reply message */ +typedef struct _MPI2_FW_UPLOAD_REPLY +{ + U8 ImageType; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U32 ActualImageSize; /* 0x14 */ +} MPI2_FW_UPLOAD_REPLY, MPI2_POINTER PTR_MPI2_FW_UPLOAD_REPLY, + Mpi2FWUploadReply_t, MPI2_POINTER pMPi2FWUploadReply_t; + + +/* FW Image Header */ +typedef struct _MPI2_FW_IMAGE_HEADER +{ + U32 Signature; /* 0x00 */ + U32 Signature0; /* 0x04 */ + U32 Signature1; /* 0x08 */ + U32 Signature2; /* 0x0C */ + MPI2_VERSION_UNION MPIVersion; /* 0x10 */ + MPI2_VERSION_UNION FWVersion; /* 0x14 */ + MPI2_VERSION_UNION NVDATAVersion; /* 0x18 */ + MPI2_VERSION_UNION PackageVersion; /* 0x1C */ + U16 VendorID; /* 0x20 */ + U16 ProductID; /* 0x22 */ + U16 ProtocolFlags; /* 0x24 */ + U16 Reserved26; /* 0x26 */ + U32 IOCCapabilities; /* 0x28 */ + U32 ImageSize; /* 0x2C */ + U32 NextImageHeaderOffset; /* 0x30 */ + U32 Checksum; /* 0x34 */ + U32 Reserved38; /* 0x38 */ + U32 Reserved3C; /* 0x3C */ + U32 Reserved40; /* 0x40 */ + U32 Reserved44; /* 0x44 */ + U32 Reserved48; /* 0x48 */ + U32 Reserved4C; /* 0x4C */ + U32 Reserved50; /* 0x50 */ + U32 Reserved54; /* 0x54 */ + U32 Reserved58; /* 0x58 */ + U32 Reserved5C; /* 0x5C */ + U32 Reserved60; /* 0x60 */ + U32 FirmwareVersionNameWhat; /* 0x64 */ + U8 FirmwareVersionName[32]; /* 0x68 */ + U32 VendorNameWhat; /* 0x88 */ + U8 VendorName[32]; /* 0x8C */ + U32 PackageNameWhat; /* 0x88 */ + U8 PackageName[32]; /* 0x8C */ + U32 ReservedD0; /* 0xD0 */ + U32 ReservedD4; /* 0xD4 */ + U32 ReservedD8; /* 0xD8 */ + U32 ReservedDC; /* 0xDC */ + U32 ReservedE0; /* 0xE0 */ + U32 ReservedE4; /* 0xE4 */ + U32 ReservedE8; /* 0xE8 */ + U32 ReservedEC; /* 0xEC */ + U32 ReservedF0; /* 0xF0 */ + U32 ReservedF4; /* 0xF4 */ + U32 ReservedF8; /* 0xF8 */ + U32 ReservedFC; /* 0xFC */ +} MPI2_FW_IMAGE_HEADER, MPI2_POINTER PTR_MPI2_FW_IMAGE_HEADER, + Mpi2FWImageHeader_t, MPI2_POINTER pMpi2FWImageHeader_t; + +/* Signature field */ +#define MPI2_FW_HEADER_SIGNATURE_OFFSET (0x00) +#define MPI2_FW_HEADER_SIGNATURE_MASK (0xFF000000) +#define MPI2_FW_HEADER_SIGNATURE (0xEA000000) + +/* Signature0 field */ +#define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04) +#define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A) + +/* Signature1 field */ +#define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08) +#define MPI2_FW_HEADER_SIGNATURE1 (0xA55AFAA5) + +/* Signature2 field */ +#define MPI2_FW_HEADER_SIGNATURE2_OFFSET (0x0C) +#define MPI2_FW_HEADER_SIGNATURE2 (0x5AA55AFA) + + +/* defines for using the ProductID field */ +#define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000) +#define MPI2_FW_HEADER_PID_TYPE_SAS (0x2000) + +#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00) +#define MPI2_FW_HEADER_PID_PROD_A (0x0000) + +#define MPI2_FW_HEADER_PID_FAMILY_MASK (0x00FF) +/* SAS */ +#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0010) + +/* use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */ + +/* use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */ + + +#define MPI2_FW_HEADER_IMAGESIZE_OFFSET (0x2C) +#define MPI2_FW_HEADER_NEXTIMAGE_OFFSET (0x30) +#define MPI2_FW_HEADER_VERNMHWAT_OFFSET (0x64) + +#define MPI2_FW_HEADER_WHAT_SIGNATURE (0x29232840) + +#define MPI2_FW_HEADER_SIZE (0x100) + + +/* Extended Image Header */ +typedef struct _MPI2_EXT_IMAGE_HEADER + +{ + U8 ImageType; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U32 Checksum; /* 0x04 */ + U32 ImageSize; /* 0x08 */ + U32 NextImageHeaderOffset; /* 0x0C */ + U32 PackageVersion; /* 0x10 */ + U32 Reserved3; /* 0x14 */ + U32 Reserved4; /* 0x18 */ + U32 Reserved5; /* 0x1C */ + U8 IdentifyString[32]; /* 0x20 */ +} MPI2_EXT_IMAGE_HEADER, MPI2_POINTER PTR_MPI2_EXT_IMAGE_HEADER, + Mpi2ExtImageHeader_t, MPI2_POINTER pMpi2ExtImageHeader_t; + +/* useful offsets */ +#define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET (0x00) +#define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET (0x08) +#define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0C) + +#define MPI2_EXT_IMAGE_HEADER_SIZE (0x40) + +/* defines for the ImageType field */ +#define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00) +#define MPI2_EXT_IMAGE_TYPE_FW (0x01) +#define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03) +#define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04) +#define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05) +#define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06) +#define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07) +#define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08) + +#define MPI2_EXT_IMAGE_TYPE_MAX (MPI2_EXT_IMAGE_TYPE_MEGARAID) + + + +/* FLASH Layout Extended Image Data */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check RegionsPerLayout at runtime. + */ +#ifndef MPI2_FLASH_NUMBER_OF_REGIONS +#define MPI2_FLASH_NUMBER_OF_REGIONS (1) +#endif + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check NumberOfLayouts at runtime. + */ +#ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS +#define MPI2_FLASH_NUMBER_OF_LAYOUTS (1) +#endif + +typedef struct _MPI2_FLASH_REGION +{ + U8 RegionType; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U32 RegionOffset; /* 0x04 */ + U32 RegionSize; /* 0x08 */ + U32 Reserved3; /* 0x0C */ +} MPI2_FLASH_REGION, MPI2_POINTER PTR_MPI2_FLASH_REGION, + Mpi2FlashRegion_t, MPI2_POINTER pMpi2FlashRegion_t; + +typedef struct _MPI2_FLASH_LAYOUT +{ + U32 FlashSize; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 Reserved2; /* 0x08 */ + U32 Reserved3; /* 0x0C */ + MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS];/* 0x10 */ +} MPI2_FLASH_LAYOUT, MPI2_POINTER PTR_MPI2_FLASH_LAYOUT, + Mpi2FlashLayout_t, MPI2_POINTER pMpi2FlashLayout_t; + +typedef struct _MPI2_FLASH_LAYOUT_DATA +{ + U8 ImageRevision; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 SizeOfRegion; /* 0x02 */ + U8 Reserved2; /* 0x03 */ + U16 NumberOfLayouts; /* 0x04 */ + U16 RegionsPerLayout; /* 0x06 */ + U16 MinimumSectorAlignment; /* 0x08 */ + U16 Reserved3; /* 0x0A */ + U32 Reserved4; /* 0x0C */ + MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS];/* 0x10 */ +} MPI2_FLASH_LAYOUT_DATA, MPI2_POINTER PTR_MPI2_FLASH_LAYOUT_DATA, + Mpi2FlashLayoutData_t, MPI2_POINTER pMpi2FlashLayoutData_t; + +/* defines for the RegionType field */ +#define MPI2_FLASH_REGION_UNUSED (0x00) +#define MPI2_FLASH_REGION_FIRMWARE (0x01) +#define MPI2_FLASH_REGION_BIOS (0x02) +#define MPI2_FLASH_REGION_NVDATA (0x03) +#define MPI2_FLASH_REGION_FIRMWARE_BACKUP (0x05) +#define MPI2_FLASH_REGION_MFG_INFORMATION (0x06) +#define MPI2_FLASH_REGION_CONFIG_1 (0x07) +#define MPI2_FLASH_REGION_CONFIG_2 (0x08) +#define MPI2_FLASH_REGION_MEGARAID (0x09) +#define MPI2_FLASH_REGION_INIT (0x0A) + +/* ImageRevision */ +#define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00) + + + +/* Supported Devices Extended Image Data */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check NumberOfDevices at runtime. + */ +#ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES +#define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES (1) +#endif + +typedef struct _MPI2_SUPPORTED_DEVICE +{ + U16 DeviceID; /* 0x00 */ + U16 VendorID; /* 0x02 */ + U16 DeviceIDMask; /* 0x04 */ + U16 Reserved1; /* 0x06 */ + U8 LowPCIRev; /* 0x08 */ + U8 HighPCIRev; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U32 Reserved3; /* 0x0C */ +} MPI2_SUPPORTED_DEVICE, MPI2_POINTER PTR_MPI2_SUPPORTED_DEVICE, + Mpi2SupportedDevice_t, MPI2_POINTER pMpi2SupportedDevice_t; + +typedef struct _MPI2_SUPPORTED_DEVICES_DATA +{ + U8 ImageRevision; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 NumberOfDevices; /* 0x02 */ + U8 Reserved2; /* 0x03 */ + U32 Reserved3; /* 0x04 */ + MPI2_SUPPORTED_DEVICE SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES]; /* 0x08 */ +} MPI2_SUPPORTED_DEVICES_DATA, MPI2_POINTER PTR_MPI2_SUPPORTED_DEVICES_DATA, + Mpi2SupportedDevicesData_t, MPI2_POINTER pMpi2SupportedDevicesData_t; + +/* ImageRevision */ +#define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION (0x00) + + +/* Init Extended Image Data */ + +typedef struct _MPI2_INIT_IMAGE_FOOTER + +{ + U32 BootFlags; /* 0x00 */ + U32 ImageSize; /* 0x04 */ + U32 Signature0; /* 0x08 */ + U32 Signature1; /* 0x0C */ + U32 Signature2; /* 0x10 */ + U32 ResetVector; /* 0x14 */ +} MPI2_INIT_IMAGE_FOOTER, MPI2_POINTER PTR_MPI2_INIT_IMAGE_FOOTER, + Mpi2InitImageFooter_t, MPI2_POINTER pMpi2InitImageFooter_t; + +/* defines for the BootFlags field */ +#define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET (0x00) + +/* defines for the ImageSize field */ +#define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET (0x04) + +/* defines for the Signature0 field */ +#define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET (0x08) +#define MPI2_INIT_IMAGE_SIGNATURE0 (0x5AA55AEA) + +/* defines for the Signature1 field */ +#define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET (0x0C) +#define MPI2_INIT_IMAGE_SIGNATURE1 (0xA55AEAA5) + +/* defines for the Signature2 field */ +#define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET (0x10) +#define MPI2_INIT_IMAGE_SIGNATURE2 (0x5AEAA55A) + +/* Signature fields as individual bytes */ +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0 (0xEA) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1 (0x5A) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2 (0xA5) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3 (0x5A) + +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4 (0xA5) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5 (0xEA) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6 (0x5A) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7 (0xA5) + +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8 (0x5A) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9 (0xA5) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A (0xEA) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B (0x5A) + +/* defines for the ResetVector field */ +#define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET (0x14) + + +#endif + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_raid.h b/drivers/scsi/mpt2sas/mpi/mpi2_raid.h new file mode 100644 index 00000000000..7134816d904 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2_raid.h @@ -0,0 +1,295 @@ +/* + * Copyright (c) 2000-2008 LSI Corporation. + * + * + * Name: mpi2_raid.h + * Title: MPI Integrated RAID messages and structures + * Creation Date: April 26, 2007 + * + * mpi2_raid.h Version: 02.00.03 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 08-31-07 02.00.01 Modifications to RAID Action request and reply, + * including the Actions and ActionData. + * 02-29-08 02.00.02 Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD. + * 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that + * the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT + * can be sized by the build environment. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_RAID_H +#define MPI2_RAID_H + +/***************************************************************************** +* +* Integrated RAID Messages +* +*****************************************************************************/ + +/**************************************************************************** +* RAID Action messages +****************************************************************************/ + +/* ActionDataWord defines for use with MPI2_RAID_ACTION_DELETE_VOLUME action */ +#define MPI2_RAID_ACTION_ADATA_KEEP_LBA0 (0x00000000) +#define MPI2_RAID_ACTION_ADATA_ZERO_LBA0 (0x00000001) + +/* use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */ + +/* ActionDataWord defines for use with MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES action */ +#define MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD (0x00000001) + +/* ActionDataWord for MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE Action */ +typedef struct _MPI2_RAID_ACTION_RATE_DATA +{ + U8 RateToChange; /* 0x00 */ + U8 RateOrMode; /* 0x01 */ + U16 DataScrubDuration; /* 0x02 */ +} MPI2_RAID_ACTION_RATE_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_RATE_DATA, + Mpi2RaidActionRateData_t, MPI2_POINTER pMpi2RaidActionRateData_t; + +#define MPI2_RAID_ACTION_SET_RATE_RESYNC (0x00) +#define MPI2_RAID_ACTION_SET_RATE_DATA_SCRUB (0x01) +#define MPI2_RAID_ACTION_SET_RATE_POWERSAVE_MODE (0x02) + +/* ActionDataWord for MPI2_RAID_ACTION_START_RAID_FUNCTION Action */ +typedef struct _MPI2_RAID_ACTION_START_RAID_FUNCTION +{ + U8 RAIDFunction; /* 0x00 */ + U8 Flags; /* 0x01 */ + U16 Reserved1; /* 0x02 */ +} MPI2_RAID_ACTION_START_RAID_FUNCTION, + MPI2_POINTER PTR_MPI2_RAID_ACTION_START_RAID_FUNCTION, + Mpi2RaidActionStartRaidFunction_t, + MPI2_POINTER pMpi2RaidActionStartRaidFunction_t; + +/* defines for the RAIDFunction field */ +#define MPI2_RAID_ACTION_START_BACKGROUND_INIT (0x00) +#define MPI2_RAID_ACTION_START_ONLINE_CAP_EXPANSION (0x01) +#define MPI2_RAID_ACTION_START_CONSISTENCY_CHECK (0x02) + +/* defines for the Flags field */ +#define MPI2_RAID_ACTION_START_NEW (0x00) +#define MPI2_RAID_ACTION_START_RESUME (0x01) + +/* ActionDataWord for MPI2_RAID_ACTION_STOP_RAID_FUNCTION Action */ +typedef struct _MPI2_RAID_ACTION_STOP_RAID_FUNCTION +{ + U8 RAIDFunction; /* 0x00 */ + U8 Flags; /* 0x01 */ + U16 Reserved1; /* 0x02 */ +} MPI2_RAID_ACTION_STOP_RAID_FUNCTION, + MPI2_POINTER PTR_MPI2_RAID_ACTION_STOP_RAID_FUNCTION, + Mpi2RaidActionStopRaidFunction_t, + MPI2_POINTER pMpi2RaidActionStopRaidFunction_t; + +/* defines for the RAIDFunction field */ +#define MPI2_RAID_ACTION_STOP_BACKGROUND_INIT (0x00) +#define MPI2_RAID_ACTION_STOP_ONLINE_CAP_EXPANSION (0x01) +#define MPI2_RAID_ACTION_STOP_CONSISTENCY_CHECK (0x02) + +/* defines for the Flags field */ +#define MPI2_RAID_ACTION_STOP_ABORT (0x00) +#define MPI2_RAID_ACTION_STOP_PAUSE (0x01) + +/* ActionDataWord for MPI2_RAID_ACTION_CREATE_HOT_SPARE Action */ +typedef struct _MPI2_RAID_ACTION_HOT_SPARE +{ + U8 HotSparePool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 DevHandle; /* 0x02 */ +} MPI2_RAID_ACTION_HOT_SPARE, MPI2_POINTER PTR_MPI2_RAID_ACTION_HOT_SPARE, + Mpi2RaidActionHotSpare_t, MPI2_POINTER pMpi2RaidActionHotSpare_t; + +/* ActionDataWord for MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE Action */ +typedef struct _MPI2_RAID_ACTION_FW_UPDATE_MODE +{ + U8 Flags; /* 0x00 */ + U8 DeviceFirmwareUpdateModeTimeout; /* 0x01 */ + U16 Reserved1; /* 0x02 */ +} MPI2_RAID_ACTION_FW_UPDATE_MODE, + MPI2_POINTER PTR_MPI2_RAID_ACTION_FW_UPDATE_MODE, + Mpi2RaidActionFwUpdateMode_t, MPI2_POINTER pMpi2RaidActionFwUpdateMode_t; + +/* ActionDataWord defines for use with MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE action */ +#define MPI2_RAID_ACTION_ADATA_DISABLE_FW_UPDATE (0x00) +#define MPI2_RAID_ACTION_ADATA_ENABLE_FW_UPDATE (0x01) + +typedef union _MPI2_RAID_ACTION_DATA +{ + U32 Word; + MPI2_RAID_ACTION_RATE_DATA Rates; + MPI2_RAID_ACTION_START_RAID_FUNCTION StartRaidFunction; + MPI2_RAID_ACTION_STOP_RAID_FUNCTION StopRaidFunction; + MPI2_RAID_ACTION_HOT_SPARE HotSpare; + MPI2_RAID_ACTION_FW_UPDATE_MODE FwUpdateMode; +} MPI2_RAID_ACTION_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_DATA, + Mpi2RaidActionData_t, MPI2_POINTER pMpi2RaidActionData_t; + + +/* RAID Action Request Message */ +typedef struct _MPI2_RAID_ACTION_REQUEST +{ + U8 Action; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 VolDevHandle; /* 0x04 */ + U8 PhysDiskNum; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U32 Reserved3; /* 0x0C */ + MPI2_RAID_ACTION_DATA ActionDataWord; /* 0x10 */ + MPI2_SGE_SIMPLE_UNION ActionDataSGE; /* 0x14 */ +} MPI2_RAID_ACTION_REQUEST, MPI2_POINTER PTR_MPI2_RAID_ACTION_REQUEST, + Mpi2RaidActionRequest_t, MPI2_POINTER pMpi2RaidActionRequest_t; + +/* RAID Action request Action values */ + +#define MPI2_RAID_ACTION_INDICATOR_STRUCT (0x01) +#define MPI2_RAID_ACTION_CREATE_VOLUME (0x02) +#define MPI2_RAID_ACTION_DELETE_VOLUME (0x03) +#define MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES (0x04) +#define MPI2_RAID_ACTION_ENABLE_ALL_VOLUMES (0x05) +#define MPI2_RAID_ACTION_PHYSDISK_OFFLINE (0x0A) +#define MPI2_RAID_ACTION_PHYSDISK_ONLINE (0x0B) +#define MPI2_RAID_ACTION_FAIL_PHYSDISK (0x0F) +#define MPI2_RAID_ACTION_ACTIVATE_VOLUME (0x11) +#define MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE (0x15) +#define MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE (0x17) +#define MPI2_RAID_ACTION_SET_VOLUME_NAME (0x18) +#define MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE (0x19) +#define MPI2_RAID_ACTION_ENABLE_FAILED_VOLUME (0x1C) +#define MPI2_RAID_ACTION_CREATE_HOT_SPARE (0x1D) +#define MPI2_RAID_ACTION_DELETE_HOT_SPARE (0x1E) +#define MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED (0x20) +#define MPI2_RAID_ACTION_START_RAID_FUNCTION (0x21) +#define MPI2_RAID_ACTION_STOP_RAID_FUNCTION (0x22) + + +/* RAID Volume Creation Structure */ + +/* + * The following define can be customized for the targeted product. + */ +#ifndef MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS +#define MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS (1) +#endif + +typedef struct _MPI2_RAID_VOLUME_PHYSDISK +{ + U8 RAIDSetNum; /* 0x00 */ + U8 PhysDiskMap; /* 0x01 */ + U16 PhysDiskDevHandle; /* 0x02 */ +} MPI2_RAID_VOLUME_PHYSDISK, MPI2_POINTER PTR_MPI2_RAID_VOLUME_PHYSDISK, + Mpi2RaidVolumePhysDisk_t, MPI2_POINTER pMpi2RaidVolumePhysDisk_t; + +/* defines for the PhysDiskMap field */ +#define MPI2_RAIDACTION_PHYSDISK_PRIMARY (0x01) +#define MPI2_RAIDACTION_PHYSDISK_SECONDARY (0x02) + +typedef struct _MPI2_RAID_VOLUME_CREATION_STRUCT +{ + U8 NumPhysDisks; /* 0x00 */ + U8 VolumeType; /* 0x01 */ + U16 Reserved1; /* 0x02 */ + U32 VolumeCreationFlags; /* 0x04 */ + U32 VolumeSettings; /* 0x08 */ + U8 Reserved2; /* 0x0C */ + U8 ResyncRate; /* 0x0D */ + U16 DataScrubDuration; /* 0x0E */ + U64 VolumeMaxLBA; /* 0x10 */ + U32 StripeSize; /* 0x18 */ + U8 Name[16]; /* 0x1C */ + MPI2_RAID_VOLUME_PHYSDISK PhysDisk[MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS];/* 0x2C */ +} MPI2_RAID_VOLUME_CREATION_STRUCT, + MPI2_POINTER PTR_MPI2_RAID_VOLUME_CREATION_STRUCT, + Mpi2RaidVolumeCreationStruct_t, MPI2_POINTER pMpi2RaidVolumeCreationStruct_t; + +/* use MPI2_RAID_VOL_TYPE_ defines from mpi2_cnfg.h for VolumeType */ + +/* defines for the VolumeCreationFlags field */ +#define MPI2_RAID_VOL_CREATION_USE_DEFAULT_SETTINGS (0x80) +#define MPI2_RAID_VOL_CREATION_BACKGROUND_INIT (0x04) +#define MPI2_RAID_VOL_CREATION_LOW_LEVEL_INIT (0x02) +#define MPI2_RAID_VOL_CREATION_MIGRATE_DATA (0x01) + + +/* RAID Online Capacity Expansion Structure */ + +typedef struct _MPI2_RAID_ONLINE_CAPACITY_EXPANSION +{ + U32 Flags; /* 0x00 */ + U16 DevHandle0; /* 0x04 */ + U16 Reserved1; /* 0x06 */ + U16 DevHandle1; /* 0x08 */ + U16 Reserved2; /* 0x0A */ +} MPI2_RAID_ONLINE_CAPACITY_EXPANSION, + MPI2_POINTER PTR_MPI2_RAID_ONLINE_CAPACITY_EXPANSION, + Mpi2RaidOnlineCapacityExpansion_t, + MPI2_POINTER pMpi2RaidOnlineCapacityExpansion_t; + + +/* RAID Volume Indicator Structure */ + +typedef struct _MPI2_RAID_VOL_INDICATOR +{ + U64 TotalBlocks; /* 0x00 */ + U64 BlocksRemaining; /* 0x08 */ + U32 Flags; /* 0x10 */ +} MPI2_RAID_VOL_INDICATOR, MPI2_POINTER PTR_MPI2_RAID_VOL_INDICATOR, + Mpi2RaidVolIndicator_t, MPI2_POINTER pMpi2RaidVolIndicator_t; + +/* defines for RAID Volume Indicator Flags field */ +#define MPI2_RAID_VOL_FLAGS_OP_MASK (0x0000000F) +#define MPI2_RAID_VOL_FLAGS_OP_BACKGROUND_INIT (0x00000000) +#define MPI2_RAID_VOL_FLAGS_OP_ONLINE_CAP_EXPANSION (0x00000001) +#define MPI2_RAID_VOL_FLAGS_OP_CONSISTENCY_CHECK (0x00000002) +#define MPI2_RAID_VOL_FLAGS_OP_RESYNC (0x00000003) + + +/* RAID Action Reply ActionData union */ +typedef union _MPI2_RAID_ACTION_REPLY_DATA +{ + U32 Word[5]; + MPI2_RAID_VOL_INDICATOR RaidVolumeIndicator; + U16 VolDevHandle; + U8 VolumeState; + U8 PhysDiskNum; +} MPI2_RAID_ACTION_REPLY_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_REPLY_DATA, + Mpi2RaidActionReplyData_t, MPI2_POINTER pMpi2RaidActionReplyData_t; + +/* use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */ + + +/* RAID Action Reply Message */ +typedef struct _MPI2_RAID_ACTION_REPLY +{ + U8 Action; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 VolDevHandle; /* 0x04 */ + U8 PhysDiskNum; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U16 Reserved3; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + MPI2_RAID_ACTION_REPLY_DATA ActionData; /* 0x14 */ +} MPI2_RAID_ACTION_REPLY, MPI2_POINTER PTR_MPI2_RAID_ACTION_REPLY, + Mpi2RaidActionReply_t, MPI2_POINTER pMpi2RaidActionReply_t; + + +#endif + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_sas.h b/drivers/scsi/mpt2sas/mpi/mpi2_sas.h new file mode 100644 index 00000000000..8a42b136cf5 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2_sas.h @@ -0,0 +1,282 @@ +/* + * Copyright (c) 2000-2007 LSI Corporation. + * + * + * Name: mpi2_sas.h + * Title: MPI Serial Attached SCSI structures and definitions + * Creation Date: February 9, 2007 + * + * mpi2.h Version: 02.00.02 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit + * Control Request. + * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control + * Request. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_SAS_H +#define MPI2_SAS_H + +/* + * Values for SASStatus. + */ +#define MPI2_SASSTATUS_SUCCESS (0x00) +#define MPI2_SASSTATUS_UNKNOWN_ERROR (0x01) +#define MPI2_SASSTATUS_INVALID_FRAME (0x02) +#define MPI2_SASSTATUS_UTC_BAD_DEST (0x03) +#define MPI2_SASSTATUS_UTC_BREAK_RECEIVED (0x04) +#define MPI2_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05) +#define MPI2_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06) +#define MPI2_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07) +#define MPI2_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08) +#define MPI2_SASSTATUS_UTC_WRONG_DESTINATION (0x09) +#define MPI2_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A) +#define MPI2_SASSTATUS_LONG_INFORMATION_UNIT (0x0B) +#define MPI2_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C) +#define MPI2_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D) +#define MPI2_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E) +#define MPI2_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F) +#define MPI2_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10) +#define MPI2_SASSTATUS_DATA_OFFSET_ERROR (0x11) +#define MPI2_SASSTATUS_SDSF_NAK_RECEIVED (0x12) +#define MPI2_SASSTATUS_SDSF_CONNECTION_FAILED (0x13) +#define MPI2_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14) + + +/* + * Values for the SAS DeviceInfo field used in SAS Device Status Change Event + * data and SAS Configuration pages. + */ +#define MPI2_SAS_DEVICE_INFO_SEP (0x00004000) +#define MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000) +#define MPI2_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000) +#define MPI2_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800) +#define MPI2_SAS_DEVICE_INFO_SSP_TARGET (0x00000400) +#define MPI2_SAS_DEVICE_INFO_STP_TARGET (0x00000200) +#define MPI2_SAS_DEVICE_INFO_SMP_TARGET (0x00000100) +#define MPI2_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080) +#define MPI2_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040) +#define MPI2_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020) +#define MPI2_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010) +#define MPI2_SAS_DEVICE_INFO_SATA_HOST (0x00000008) + +#define MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007) +#define MPI2_SAS_DEVICE_INFO_NO_DEVICE (0x00000000) +#define MPI2_SAS_DEVICE_INFO_END_DEVICE (0x00000001) +#define MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002) +#define MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003) + + +/***************************************************************************** +* +* SAS Messages +* +*****************************************************************************/ + +/**************************************************************************** +* SMP Passthrough messages +****************************************************************************/ + +/* SMP Passthrough Request Message */ +typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST +{ + U8 PassthroughFlags; /* 0x00 */ + U8 PhysicalPort; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 RequestDataLength; /* 0x04 */ + U8 SGLFlags; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U32 Reserved2; /* 0x0C */ + U64 SASAddress; /* 0x10 */ + U32 Reserved3; /* 0x18 */ + U32 Reserved4; /* 0x1C */ + MPI2_SIMPLE_SGE_UNION SGL; /* 0x20 */ +} MPI2_SMP_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REQUEST, + Mpi2SmpPassthroughRequest_t, MPI2_POINTER pMpi2SmpPassthroughRequest_t; + +/* values for PassthroughFlags field */ +#define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80) + +/* values for SGLFlags field are in the SGL section of mpi2.h */ + + +/* SMP Passthrough Reply Message */ +typedef struct _MPI2_SMP_PASSTHROUGH_REPLY +{ + U8 PassthroughFlags; /* 0x00 */ + U8 PhysicalPort; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 ResponseDataLength; /* 0x04 */ + U8 SGLFlags; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U8 Reserved2; /* 0x0C */ + U8 SASStatus; /* 0x0D */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U32 Reserved3; /* 0x14 */ + U8 ResponseData[4]; /* 0x18 */ +} MPI2_SMP_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REPLY, + Mpi2SmpPassthroughReply_t, MPI2_POINTER pMpi2SmpPassthroughReply_t; + +/* values for PassthroughFlags field */ +#define MPI2_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80) + +/* values for SASStatus field are at the top of this file */ + + +/**************************************************************************** +* SATA Passthrough messages +****************************************************************************/ + +/* SATA Passthrough Request Message */ +typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST +{ + U16 DevHandle; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 PassthroughFlags; /* 0x04 */ + U8 SGLFlags; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U32 Reserved2; /* 0x0C */ + U32 Reserved3; /* 0x10 */ + U32 Reserved4; /* 0x14 */ + U32 DataLength; /* 0x18 */ + U8 CommandFIS[20]; /* 0x1C */ + MPI2_SIMPLE_SGE_UNION SGL; /* 0x20 */ +} MPI2_SATA_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REQUEST, + Mpi2SataPassthroughRequest_t, MPI2_POINTER pMpi2SataPassthroughRequest_t; + +/* values for PassthroughFlags field */ +#define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100) +#define MPI2_SATA_PT_REQ_PT_FLAGS_DMA (0x0020) +#define MPI2_SATA_PT_REQ_PT_FLAGS_PIO (0x0010) +#define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004) +#define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002) +#define MPI2_SATA_PT_REQ_PT_FLAGS_READ (0x0001) + +/* values for SGLFlags field are in the SGL section of mpi2.h */ + + +/* SATA Passthrough Reply Message */ +typedef struct _MPI2_SATA_PASSTHROUGH_REPLY +{ + U16 DevHandle; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 PassthroughFlags; /* 0x04 */ + U8 SGLFlags; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U8 Reserved2; /* 0x0C */ + U8 SASStatus; /* 0x0D */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U8 StatusFIS[20]; /* 0x14 */ + U32 StatusControlRegisters; /* 0x28 */ + U32 TransferCount; /* 0x2C */ +} MPI2_SATA_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REPLY, + Mpi2SataPassthroughReply_t, MPI2_POINTER pMpi2SataPassthroughReply_t; + +/* values for SASStatus field are at the top of this file */ + + +/**************************************************************************** +* SAS IO Unit Control messages +****************************************************************************/ + +/* SAS IO Unit Control Request Message */ +typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST +{ + U8 Operation; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 DevHandle; /* 0x04 */ + U8 IOCParameter; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U16 Reserved4; /* 0x0C */ + U8 PhyNum; /* 0x0E */ + U8 PrimFlags; /* 0x0F */ + U32 Primitive; /* 0x10 */ + U8 LookupMethod; /* 0x14 */ + U8 Reserved5; /* 0x15 */ + U16 SlotNumber; /* 0x16 */ + U64 LookupAddress; /* 0x18 */ + U32 IOCParameterValue; /* 0x20 */ + U32 Reserved7; /* 0x24 */ + U32 Reserved8; /* 0x28 */ +} MPI2_SAS_IOUNIT_CONTROL_REQUEST, + MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REQUEST, + Mpi2SasIoUnitControlRequest_t, MPI2_POINTER pMpi2SasIoUnitControlRequest_t; + +/* values for the Operation field */ +#define MPI2_SAS_OP_CLEAR_ALL_PERSISTENT (0x02) +#define MPI2_SAS_OP_PHY_LINK_RESET (0x06) +#define MPI2_SAS_OP_PHY_HARD_RESET (0x07) +#define MPI2_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) +#define MPI2_SAS_OP_SEND_PRIMITIVE (0x0A) +#define MPI2_SAS_OP_FORCE_FULL_DISCOVERY (0x0B) +#define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C) +#define MPI2_SAS_OP_REMOVE_DEVICE (0x0D) +#define MPI2_SAS_OP_LOOKUP_MAPPING (0x0E) +#define MPI2_SAS_OP_SET_IOC_PARAMETER (0x0F) +#define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80) + +/* values for the PrimFlags field */ +#define MPI2_SAS_PRIMFLAGS_SINGLE (0x08) +#define MPI2_SAS_PRIMFLAGS_TRIPLE (0x02) +#define MPI2_SAS_PRIMFLAGS_REDUNDANT (0x01) + +/* values for the LookupMethod field */ +#define MPI2_SAS_LOOKUP_METHOD_SAS_ADDRESS (0x01) +#define MPI2_SAS_LOOKUP_METHOD_SAS_ENCLOSURE_SLOT (0x02) +#define MPI2_SAS_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03) + + +/* SAS IO Unit Control Reply Message */ +typedef struct _MPI2_SAS_IOUNIT_CONTROL_REPLY +{ + U8 Operation; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 DevHandle; /* 0x04 */ + U8 IOCParameter; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U16 Reserved4; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_SAS_IOUNIT_CONTROL_REPLY, + MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REPLY, + Mpi2SasIoUnitControlReply_t, MPI2_POINTER pMpi2SasIoUnitControlReply_t; + + +#endif + + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h new file mode 100644 index 00000000000..2ff4e936bd3 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h @@ -0,0 +1,249 @@ +/* + * Copyright (c) 2000-2008 LSI Corporation. + * + * + * Name: mpi2_tool.h + * Title: MPI diagnostic tool structures and definitions + * Creation Date: March 26, 2007 + * + * mpi2_tool.h Version: 02.00.02 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release + * structures and defines. + * 02-29-08 02.00.02 Modified various names to make them 32-character unique. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_TOOL_H +#define MPI2_TOOL_H + +/***************************************************************************** +* +* Toolbox Messages +* +*****************************************************************************/ + +/* defines for the Tools */ +#define MPI2_TOOLBOX_CLEAN_TOOL (0x00) +#define MPI2_TOOLBOX_MEMORY_MOVE_TOOL (0x01) +#define MPI2_TOOLBOX_BEACON_TOOL (0x05) + +/**************************************************************************** +* Toolbox reply +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_REPLY +{ + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_TOOLBOX_REPLY, MPI2_POINTER PTR_MPI2_TOOLBOX_REPLY, + Mpi2ToolboxReply_t, MPI2_POINTER pMpi2ToolboxReply_t; + + +/**************************************************************************** +* Toolbox Clean Tool request +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST +{ + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U32 Flags; /* 0x0C */ + } MPI2_TOOLBOX_CLEAN_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_CLEAN_REQUEST, + Mpi2ToolboxCleanRequest_t, MPI2_POINTER pMpi2ToolboxCleanRequest_t; + +/* values for the Flags field */ +#define MPI2_TOOLBOX_CLEAN_BOOT_SERVICES (0x80000000) +#define MPI2_TOOLBOX_CLEAN_PERSIST_MANUFACT_PAGES (0x40000000) +#define MPI2_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES (0x20000000) +#define MPI2_TOOLBOX_CLEAN_FW_CURRENT (0x10000000) +#define MPI2_TOOLBOX_CLEAN_FW_BACKUP (0x08000000) +#define MPI2_TOOLBOX_CLEAN_MEGARAID (0x02000000) +#define MPI2_TOOLBOX_CLEAN_INITIALIZATION (0x01000000) +#define MPI2_TOOLBOX_CLEAN_FLASH (0x00000004) +#define MPI2_TOOLBOX_CLEAN_SEEPROM (0x00000002) +#define MPI2_TOOLBOX_CLEAN_NVSRAM (0x00000001) + + +/**************************************************************************** +* Toolbox Memory Move request +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST +{ + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + MPI2_SGE_SIMPLE_UNION SGL; /* 0x0C */ +} MPI2_TOOLBOX_MEM_MOVE_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_MEM_MOVE_REQUEST, + Mpi2ToolboxMemMoveRequest_t, MPI2_POINTER pMpi2ToolboxMemMoveRequest_t; + + +/**************************************************************************** +* Toolbox Beacon Tool request +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_BEACON_REQUEST +{ + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U8 Reserved5; /* 0x0C */ + U8 PhysicalPort; /* 0x0D */ + U8 Reserved6; /* 0x0E */ + U8 Flags; /* 0x0F */ +} MPI2_TOOLBOX_BEACON_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_BEACON_REQUEST, + Mpi2ToolboxBeaconRequest_t, MPI2_POINTER pMpi2ToolboxBeaconRequest_t; + +/* values for the Flags field */ +#define MPI2_TOOLBOX_FLAGS_BEACONMODE_OFF (0x00) +#define MPI2_TOOLBOX_FLAGS_BEACONMODE_ON (0x01) + + +/***************************************************************************** +* +* Diagnostic Buffer Messages +* +*****************************************************************************/ + + +/**************************************************************************** +* Diagnostic Buffer Post request +****************************************************************************/ + +typedef struct _MPI2_DIAG_BUFFER_POST_REQUEST +{ + U8 Reserved1; /* 0x00 */ + U8 BufferType; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U64 BufferAddress; /* 0x0C */ + U32 BufferLength; /* 0x14 */ + U32 Reserved5; /* 0x18 */ + U32 Reserved6; /* 0x1C */ + U32 Flags; /* 0x20 */ + U32 ProductSpecific[23]; /* 0x24 */ +} MPI2_DIAG_BUFFER_POST_REQUEST, MPI2_POINTER PTR_MPI2_DIAG_BUFFER_POST_REQUEST, + Mpi2DiagBufferPostRequest_t, MPI2_POINTER pMpi2DiagBufferPostRequest_t; + +/* values for the BufferType field */ +#define MPI2_DIAG_BUF_TYPE_TRACE (0x00) +#define MPI2_DIAG_BUF_TYPE_SNAPSHOT (0x01) +/* count of the number of buffer types */ +#define MPI2_DIAG_BUF_TYPE_COUNT (0x02) + + +/**************************************************************************** +* Diagnostic Buffer Post reply +****************************************************************************/ + +typedef struct _MPI2_DIAG_BUFFER_POST_REPLY +{ + U8 Reserved1; /* 0x00 */ + U8 BufferType; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U32 TransferLength; /* 0x14 */ +} MPI2_DIAG_BUFFER_POST_REPLY, MPI2_POINTER PTR_MPI2_DIAG_BUFFER_POST_REPLY, + Mpi2DiagBufferPostReply_t, MPI2_POINTER pMpi2DiagBufferPostReply_t; + + +/**************************************************************************** +* Diagnostic Release request +****************************************************************************/ + +typedef struct _MPI2_DIAG_RELEASE_REQUEST +{ + U8 Reserved1; /* 0x00 */ + U8 BufferType; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ +} MPI2_DIAG_RELEASE_REQUEST, MPI2_POINTER PTR_MPI2_DIAG_RELEASE_REQUEST, + Mpi2DiagReleaseRequest_t, MPI2_POINTER pMpi2DiagReleaseRequest_t; + + +/**************************************************************************** +* Diagnostic Buffer Post reply +****************************************************************************/ + +typedef struct _MPI2_DIAG_RELEASE_REPLY +{ + U8 Reserved1; /* 0x00 */ + U8 BufferType; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_DIAG_RELEASE_REPLY, MPI2_POINTER PTR_MPI2_DIAG_RELEASE_REPLY, + Mpi2DiagReleaseReply_t, MPI2_POINTER pMpi2DiagReleaseReply_t; + + +#endif + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_type.h b/drivers/scsi/mpt2sas/mpi/mpi2_type.h new file mode 100644 index 00000000000..cfde017bf16 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2_type.h @@ -0,0 +1,61 @@ +/* + * Copyright (c) 2000-2007 LSI Corporation. + * + * + * Name: mpi2_type.h + * Title: MPI basic type definitions + * Creation Date: August 16, 2006 + * + * mpi2_type.h Version: 02.00.00 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_TYPE_H +#define MPI2_TYPE_H + + +/******************************************************************************* + * Define MPI2_POINTER if it hasn't already been defined. By default + * MPI2_POINTER is defined to be a near pointer. MPI2_POINTER can be defined as + * a far pointer by defining MPI2_POINTER as "far *" before this header file is + * included. + */ +#ifndef MPI2_POINTER +#define MPI2_POINTER * +#endif + +/* the basic types may have already been included by mpi_type.h */ +#ifndef MPI_TYPE_H +/***************************************************************************** +* +* Basic Types +* +*****************************************************************************/ + +typedef u8 U8; +typedef __le16 U16; +typedef __le32 U32; +typedef __le64 U64 __attribute__((aligned(4))); + +/***************************************************************************** +* +* Pointer Types +* +*****************************************************************************/ + +typedef U8 *PU8; +typedef U16 *PU16; +typedef U32 *PU32; +typedef U64 *PU64; + +#endif + +#endif + diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c new file mode 100644 index 00000000000..52427a8324f --- /dev/null +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -0,0 +1,3435 @@ +/* + * This is the Fusion MPT base driver providing common API layer interface + * for access to MPT (Message Passing Technology) firmware. + * + * This code is based on drivers/scsi/mpt2sas/mpt2_base.c + * Copyright (C) 2007-2008 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/sort.h> +#include <linux/io.h> + +#include "mpt2sas_base.h" + +static MPT_CALLBACK mpt_callbacks[MPT_MAX_CALLBACKS]; + +#define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */ +#define MPT2SAS_MAX_REQUEST_QUEUE 500 /* maximum controller queue depth */ + +static int max_queue_depth = -1; +module_param(max_queue_depth, int, 0); +MODULE_PARM_DESC(max_queue_depth, " max controller queue depth "); + +static int max_sgl_entries = -1; +module_param(max_sgl_entries, int, 0); +MODULE_PARM_DESC(max_sgl_entries, " max sg entries "); + +static int msix_disable = -1; +module_param(msix_disable, int, 0); +MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)"); + +/** + * _base_fault_reset_work - workq handling ioc fault conditions + * @work: input argument, used to derive ioc + * Context: sleep. + * + * Return nothing. + */ +static void +_base_fault_reset_work(struct work_struct *work) +{ + struct MPT2SAS_ADAPTER *ioc = + container_of(work, struct MPT2SAS_ADAPTER, fault_reset_work.work); + unsigned long flags; + u32 doorbell; + int rc; + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->ioc_reset_in_progress) + goto rearm_timer; + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + doorbell = mpt2sas_base_get_iocstate(ioc, 0); + if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { + rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + printk(MPT2SAS_WARN_FMT "%s: hard reset: %s\n", ioc->name, + __func__, (rc == 0) ? "success" : "failed"); + doorbell = mpt2sas_base_get_iocstate(ioc, 0); + if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) + mpt2sas_base_fault_info(ioc, doorbell & + MPI2_DOORBELL_DATA_MASK); + } + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + rearm_timer: + if (ioc->fault_reset_work_q) + queue_delayed_work(ioc->fault_reset_work_q, + &ioc->fault_reset_work, + msecs_to_jiffies(FAULT_POLLING_INTERVAL)); + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); +} + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _base_sas_ioc_info - verbose translation of the ioc status + * @ioc: pointer to scsi command object + * @mpi_reply: reply mf payload returned from firmware + * @request_hdr: request mf + * + * Return nothing. + */ +static void +_base_sas_ioc_info(struct MPT2SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply, + MPI2RequestHeader_t *request_hdr) +{ + u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & + MPI2_IOCSTATUS_MASK; + char *desc = NULL; + u16 frame_sz; + char *func_str = NULL; + + /* SCSI_IO, RAID_PASS are handled from _scsih_scsi_ioc_info */ + if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || + request_hdr->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH || + request_hdr->Function == MPI2_FUNCTION_EVENT_NOTIFICATION) + return; + + switch (ioc_status) { + +/**************************************************************************** +* Common IOCStatus values for all replies +****************************************************************************/ + + case MPI2_IOCSTATUS_INVALID_FUNCTION: + desc = "invalid function"; + break; + case MPI2_IOCSTATUS_BUSY: + desc = "busy"; + break; + case MPI2_IOCSTATUS_INVALID_SGL: + desc = "invalid sgl"; + break; + case MPI2_IOCSTATUS_INTERNAL_ERROR: + desc = "internal error"; + break; + case MPI2_IOCSTATUS_INVALID_VPID: + desc = "invalid vpid"; + break; + case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES: + desc = "insufficient resources"; + break; + case MPI2_IOCSTATUS_INVALID_FIELD: + desc = "invalid field"; + break; + case MPI2_IOCSTATUS_INVALID_STATE: + desc = "invalid state"; + break; + case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED: + desc = "op state not supported"; + break; + +/**************************************************************************** +* Config IOCStatus values +****************************************************************************/ + + case MPI2_IOCSTATUS_CONFIG_INVALID_ACTION: + desc = "config invalid action"; + break; + case MPI2_IOCSTATUS_CONFIG_INVALID_TYPE: + desc = "config invalid type"; + break; + case MPI2_IOCSTATUS_CONFIG_INVALID_PAGE: + desc = "config invalid page"; + break; + case MPI2_IOCSTATUS_CONFIG_INVALID_DATA: + desc = "config invalid data"; + break; + case MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS: + desc = "config no defaults"; + break; + case MPI2_IOCSTATUS_CONFIG_CANT_COMMIT: + desc = "config cant commit"; + break; + +/**************************************************************************** +* SCSI IO Reply +****************************************************************************/ + + case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR: + case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE: + case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE: + case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN: + case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN: + case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR: + case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR: + case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED: + case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: + case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED: + case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED: + case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED: + break; + +/**************************************************************************** +* For use by SCSI Initiator and SCSI Target end-to-end data protection +****************************************************************************/ + + case MPI2_IOCSTATUS_EEDP_GUARD_ERROR: + desc = "eedp guard error"; + break; + case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR: + desc = "eedp ref tag error"; + break; + case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR: + desc = "eedp app tag error"; + break; + +/**************************************************************************** +* SCSI Target values +****************************************************************************/ + + case MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX: + desc = "target invalid io index"; + break; + case MPI2_IOCSTATUS_TARGET_ABORTED: + desc = "target aborted"; + break; + case MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: + desc = "target no conn retryable"; + break; + case MPI2_IOCSTATUS_TARGET_NO_CONNECTION: + desc = "target no connection"; + break; + case MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: + desc = "target xfer count mismatch"; + break; + case MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: + desc = "target data offset error"; + break; + case MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: + desc = "target too much write data"; + break; + case MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT: + desc = "target iu too short"; + break; + case MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: + desc = "target ack nak timeout"; + break; + case MPI2_IOCSTATUS_TARGET_NAK_RECEIVED: + desc = "target nak received"; + break; + +/**************************************************************************** +* Serial Attached SCSI values +****************************************************************************/ + + case MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED: + desc = "smp request failed"; + break; + case MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN: + desc = "smp data overrun"; + break; + +/**************************************************************************** +* Diagnostic Buffer Post / Diagnostic Release values +****************************************************************************/ + + case MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED: + desc = "diagnostic released"; + break; + default: + break; + } + + if (!desc) + return; + + switch (request_hdr->Function) { + case MPI2_FUNCTION_CONFIG: + frame_sz = sizeof(Mpi2ConfigRequest_t) + ioc->sge_size; + func_str = "config_page"; + break; + case MPI2_FUNCTION_SCSI_TASK_MGMT: + frame_sz = sizeof(Mpi2SCSITaskManagementRequest_t); + func_str = "task_mgmt"; + break; + case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL: + frame_sz = sizeof(Mpi2SasIoUnitControlRequest_t); + func_str = "sas_iounit_ctl"; + break; + case MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR: + frame_sz = sizeof(Mpi2SepRequest_t); + func_str = "enclosure"; + break; + case MPI2_FUNCTION_IOC_INIT: + frame_sz = sizeof(Mpi2IOCInitRequest_t); + func_str = "ioc_init"; + break; + case MPI2_FUNCTION_PORT_ENABLE: + frame_sz = sizeof(Mpi2PortEnableRequest_t); + func_str = "port_enable"; + break; + case MPI2_FUNCTION_SMP_PASSTHROUGH: + frame_sz = sizeof(Mpi2SmpPassthroughRequest_t) + ioc->sge_size; + func_str = "smp_passthru"; + break; + default: + frame_sz = 32; + func_str = "unknown"; + break; + } + + printk(MPT2SAS_WARN_FMT "ioc_status: %s(0x%04x), request(0x%p)," + " (%s)\n", ioc->name, desc, ioc_status, request_hdr, func_str); + + _debug_dump_mf(request_hdr, frame_sz/4); +} + +/** + * _base_display_event_data - verbose translation of firmware asyn events + * @ioc: pointer to scsi command object + * @mpi_reply: reply mf payload returned from firmware + * + * Return nothing. + */ +static void +_base_display_event_data(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventNotificationReply_t *mpi_reply) +{ + char *desc = NULL; + u16 event; + + if (!(ioc->logging_level & MPT_DEBUG_EVENTS)) + return; + + event = le16_to_cpu(mpi_reply->Event); + + switch (event) { + case MPI2_EVENT_LOG_DATA: + desc = "Log Data"; + break; + case MPI2_EVENT_STATE_CHANGE: + desc = "Status Change"; + break; + case MPI2_EVENT_HARD_RESET_RECEIVED: + desc = "Hard Reset Received"; + break; + case MPI2_EVENT_EVENT_CHANGE: + desc = "Event Change"; + break; + case MPI2_EVENT_TASK_SET_FULL: + desc = "Task Set Full"; + break; + case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: + desc = "Device Status Change"; + break; + case MPI2_EVENT_IR_OPERATION_STATUS: + desc = "IR Operation Status"; + break; + case MPI2_EVENT_SAS_DISCOVERY: + desc = "Discovery"; + break; + case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: + desc = "SAS Broadcast Primitive"; + break; + case MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE: + desc = "SAS Init Device Status Change"; + break; + case MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW: + desc = "SAS Init Table Overflow"; + break; + case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: + desc = "SAS Topology Change List"; + break; + case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: + desc = "SAS Enclosure Device Status Change"; + break; + case MPI2_EVENT_IR_VOLUME: + desc = "IR Volume"; + break; + case MPI2_EVENT_IR_PHYSICAL_DISK: + desc = "IR Physical Disk"; + break; + case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: + desc = "IR Configuration Change List"; + break; + case MPI2_EVENT_LOG_ENTRY_ADDED: + desc = "Log Entry Added"; + break; + } + + if (!desc) + return; + + printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, desc); +} +#endif + +/** + * _base_sas_log_info - verbose translation of firmware log info + * @ioc: pointer to scsi command object + * @log_info: log info + * + * Return nothing. + */ +static void +_base_sas_log_info(struct MPT2SAS_ADAPTER *ioc , u32 log_info) +{ + union loginfo_type { + u32 loginfo; + struct { + u32 subcode:16; + u32 code:8; + u32 originator:4; + u32 bus_type:4; + } dw; + }; + union loginfo_type sas_loginfo; + char *originator_str = NULL; + + sas_loginfo.loginfo = log_info; + if (sas_loginfo.dw.bus_type != 3 /*SAS*/) + return; + + /* eat the loginfos associated with task aborts */ + if (ioc->ignore_loginfos && (log_info == 30050000 || log_info == + 0x31140000 || log_info == 0x31130000)) + return; + + switch (sas_loginfo.dw.originator) { + case 0: + originator_str = "IOP"; + break; + case 1: + originator_str = "PL"; + break; + case 2: + originator_str = "IR"; + break; + } + + printk(MPT2SAS_WARN_FMT "log_info(0x%08x): originator(%s), " + "code(0x%02x), sub_code(0x%04x)\n", ioc->name, log_info, + originator_str, sas_loginfo.dw.code, + sas_loginfo.dw.subcode); +} + +/** + * mpt2sas_base_fault_info - verbose translation of firmware FAULT code + * @ioc: pointer to scsi command object + * @fault_code: fault code + * + * Return nothing. + */ +void +mpt2sas_base_fault_info(struct MPT2SAS_ADAPTER *ioc , u16 fault_code) +{ + printk(MPT2SAS_ERR_FMT "fault_state(0x%04x)!\n", + ioc->name, fault_code); +} + +/** + * _base_display_reply_info - + * @ioc: pointer to scsi command object + * @smid: system request message index + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * + * Return nothing. + */ +static void +_base_display_reply_info(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, + u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + u16 ioc_status; + + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + ioc_status = le16_to_cpu(mpi_reply->IOCStatus); +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if ((ioc_status & MPI2_IOCSTATUS_MASK) && + (ioc->logging_level & MPT_DEBUG_REPLY)) { + _base_sas_ioc_info(ioc , mpi_reply, + mpt2sas_base_get_msg_frame(ioc, smid)); + } +#endif + if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) + _base_sas_log_info(ioc, le32_to_cpu(mpi_reply->IOCLogInfo)); +} + +/** + * mpt2sas_base_done - base internal command completion routine + * @ioc: pointer to scsi command object + * @smid: system request message index + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * + * Return nothing. + */ +void +mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK) + return; + + if (ioc->base_cmds.status == MPT2_CMD_NOT_USED) + return; + + ioc->base_cmds.status |= MPT2_CMD_COMPLETE; + if (mpi_reply) { + ioc->base_cmds.status |= MPT2_CMD_REPLY_VALID; + memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); + } + ioc->base_cmds.status &= ~MPT2_CMD_PENDING; + complete(&ioc->base_cmds.done); +} + +/** + * _base_async_event - main callback handler for firmware asyn events + * @ioc: pointer to scsi command object + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * + * Return nothing. + */ +static void +_base_async_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply) +{ + Mpi2EventNotificationReply_t *mpi_reply; + Mpi2EventAckRequest_t *ack_request; + u16 smid; + + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + if (!mpi_reply) + return; + if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION) + return; +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + _base_display_event_data(ioc, mpi_reply); +#endif + if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED)) + goto out; + smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + goto out; + } + + ack_request = mpt2sas_base_get_msg_frame(ioc, smid); + memset(ack_request, 0, sizeof(Mpi2EventAckRequest_t)); + ack_request->Function = MPI2_FUNCTION_EVENT_ACK; + ack_request->Event = mpi_reply->Event; + ack_request->EventContext = mpi_reply->EventContext; + ack_request->VF_ID = VF_ID; + mpt2sas_base_put_smid_default(ioc, smid, VF_ID); + + out: + + /* scsih callback handler */ + mpt2sas_scsih_event_callback(ioc, VF_ID, reply); + + /* ctl callback handler */ + mpt2sas_ctl_event_callback(ioc, VF_ID, reply); +} + +/** + * _base_mask_interrupts - disable interrupts + * @ioc: pointer to scsi command object + * + * Disabling ResetIRQ, Reply and Doorbell Interrupts + * + * Return nothing. + */ +static void +_base_mask_interrupts(struct MPT2SAS_ADAPTER *ioc) +{ + u32 him_register; + + ioc->mask_interrupts = 1; + him_register = readl(&ioc->chip->HostInterruptMask); + him_register |= MPI2_HIM_DIM + MPI2_HIM_RIM + MPI2_HIM_RESET_IRQ_MASK; + writel(him_register, &ioc->chip->HostInterruptMask); + readl(&ioc->chip->HostInterruptMask); +} + +/** + * _base_unmask_interrupts - enable interrupts + * @ioc: pointer to scsi command object + * + * Enabling only Reply Interrupts + * + * Return nothing. + */ +static void +_base_unmask_interrupts(struct MPT2SAS_ADAPTER *ioc) +{ + u32 him_register; + + writel(0, &ioc->chip->HostInterruptStatus); + him_register = readl(&ioc->chip->HostInterruptMask); + him_register &= ~MPI2_HIM_RIM; + writel(him_register, &ioc->chip->HostInterruptMask); + ioc->mask_interrupts = 0; +} + +/** + * _base_interrupt - MPT adapter (IOC) specific interrupt handler. + * @irq: irq number (not used) + * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure + * @r: pt_regs pointer (not used) + * + * Return IRQ_HANDLE if processed, else IRQ_NONE. + */ +static irqreturn_t +_base_interrupt(int irq, void *bus_id) +{ + u32 post_index, post_index_next, completed_cmds; + u8 request_desript_type; + u16 smid; + u8 cb_idx; + u32 reply; + u8 VF_ID; + int i; + struct MPT2SAS_ADAPTER *ioc = bus_id; + + if (ioc->mask_interrupts) + return IRQ_NONE; + + post_index = ioc->reply_post_host_index; + request_desript_type = ioc->reply_post_free[post_index]. + Default.ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; + if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) + return IRQ_NONE; + + completed_cmds = 0; + do { + if (ioc->reply_post_free[post_index].Words == ~0ULL) + goto out; + reply = 0; + cb_idx = 0xFF; + smid = le16_to_cpu(ioc->reply_post_free[post_index]. + Default.DescriptorTypeDependent1); + VF_ID = ioc->reply_post_free[post_index]. + Default.VF_ID; + if (request_desript_type == + MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) { + reply = le32_to_cpu(ioc->reply_post_free[post_index]. + AddressReply.ReplyFrameAddress); + } else if (request_desript_type == + MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER) + goto next; + else if (request_desript_type == + MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS) + goto next; + if (smid) + cb_idx = ioc->scsi_lookup[smid - 1].cb_idx; + if (smid && cb_idx != 0xFF) { + mpt_callbacks[cb_idx](ioc, smid, VF_ID, reply); + if (reply) + _base_display_reply_info(ioc, smid, VF_ID, + reply); + mpt2sas_base_free_smid(ioc, smid); + } + if (!smid) + _base_async_event(ioc, VF_ID, reply); + + /* reply free queue handling */ + if (reply) { + ioc->reply_free_host_index = + (ioc->reply_free_host_index == + (ioc->reply_free_queue_depth - 1)) ? + 0 : ioc->reply_free_host_index + 1; + ioc->reply_free[ioc->reply_free_host_index] = + cpu_to_le32(reply); + writel(ioc->reply_free_host_index, + &ioc->chip->ReplyFreeHostIndex); + wmb(); + } + + next: + post_index_next = (post_index == (ioc->reply_post_queue_depth - + 1)) ? 0 : post_index + 1; + request_desript_type = + ioc->reply_post_free[post_index_next].Default.ReplyFlags + & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; + completed_cmds++; + if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) + goto out; + post_index = post_index_next; + } while (1); + + out: + + if (!completed_cmds) + return IRQ_NONE; + + /* reply post descriptor handling */ + post_index_next = ioc->reply_post_host_index; + for (i = 0 ; i < completed_cmds; i++) { + post_index = post_index_next; + /* poison the reply post descriptor */ + ioc->reply_post_free[post_index_next].Words = ~0ULL; + post_index_next = (post_index == + (ioc->reply_post_queue_depth - 1)) + ? 0 : post_index + 1; + } + ioc->reply_post_host_index = post_index_next; + writel(post_index_next, &ioc->chip->ReplyPostHostIndex); + wmb(); + return IRQ_HANDLED; +} + +/** + * mpt2sas_base_release_callback_handler - clear interupt callback handler + * @cb_idx: callback index + * + * Return nothing. + */ +void +mpt2sas_base_release_callback_handler(u8 cb_idx) +{ + mpt_callbacks[cb_idx] = NULL; +} + +/** + * mpt2sas_base_register_callback_handler - obtain index for the interrupt callback handler + * @cb_func: callback function + * + * Returns cb_func. + */ +u8 +mpt2sas_base_register_callback_handler(MPT_CALLBACK cb_func) +{ + u8 cb_idx; + + for (cb_idx = MPT_MAX_CALLBACKS-1; cb_idx; cb_idx--) + if (mpt_callbacks[cb_idx] == NULL) + break; + + mpt_callbacks[cb_idx] = cb_func; + return cb_idx; +} + +/** + * mpt2sas_base_initialize_callback_handler - initialize the interrupt callback handler + * + * Return nothing. + */ +void +mpt2sas_base_initialize_callback_handler(void) +{ + u8 cb_idx; + + for (cb_idx = 0; cb_idx < MPT_MAX_CALLBACKS; cb_idx++) + mpt2sas_base_release_callback_handler(cb_idx); +} + +/** + * mpt2sas_base_build_zero_len_sge - build zero length sg entry + * @ioc: per adapter object + * @paddr: virtual address for SGE + * + * Create a zero length scatter gather entry to insure the IOCs hardware has + * something to use if the target device goes brain dead and tries + * to send data even when none is asked for. + * + * Return nothing. + */ +void +mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER *ioc, void *paddr) +{ + u32 flags_length = (u32)((MPI2_SGE_FLAGS_LAST_ELEMENT | + MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST | + MPI2_SGE_FLAGS_SIMPLE_ELEMENT) << + MPI2_SGE_FLAGS_SHIFT); + ioc->base_add_sg_single(paddr, flags_length, -1); +} + +/** + * _base_add_sg_single_32 - Place a simple 32 bit SGE at address pAddr. + * @paddr: virtual address for SGE + * @flags_length: SGE flags and data transfer length + * @dma_addr: Physical address + * + * Return nothing. + */ +static void +_base_add_sg_single_32(void *paddr, u32 flags_length, dma_addr_t dma_addr) +{ + Mpi2SGESimple32_t *sgel = paddr; + + flags_length |= (MPI2_SGE_FLAGS_32_BIT_ADDRESSING | + MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT; + sgel->FlagsLength = cpu_to_le32(flags_length); + sgel->Address = cpu_to_le32(dma_addr); +} + + +/** + * _base_add_sg_single_64 - Place a simple 64 bit SGE at address pAddr. + * @paddr: virtual address for SGE + * @flags_length: SGE flags and data transfer length + * @dma_addr: Physical address + * + * Return nothing. + */ +static void +_base_add_sg_single_64(void *paddr, u32 flags_length, dma_addr_t dma_addr) +{ + Mpi2SGESimple64_t *sgel = paddr; + + flags_length |= (MPI2_SGE_FLAGS_64_BIT_ADDRESSING | + MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT; + sgel->FlagsLength = cpu_to_le32(flags_length); + sgel->Address = cpu_to_le64(dma_addr); +} + +#define convert_to_kb(x) ((x) << (PAGE_SHIFT - 10)) + +/** + * _base_config_dma_addressing - set dma addressing + * @ioc: per adapter object + * @pdev: PCI device struct + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_config_dma_addressing(struct MPT2SAS_ADAPTER *ioc, struct pci_dev *pdev) +{ + struct sysinfo s; + char *desc = NULL; + + if (sizeof(dma_addr_t) > 4) { + const uint64_t required_mask = + dma_get_required_mask(&pdev->dev); + if ((required_mask > DMA_32BIT_MASK) && !pci_set_dma_mask(pdev, + DMA_64BIT_MASK) && !pci_set_consistent_dma_mask(pdev, + DMA_64BIT_MASK)) { + ioc->base_add_sg_single = &_base_add_sg_single_64; + ioc->sge_size = sizeof(Mpi2SGESimple64_t); + desc = "64"; + goto out; + } + } + + if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK) + && !pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) { + ioc->base_add_sg_single = &_base_add_sg_single_32; + ioc->sge_size = sizeof(Mpi2SGESimple32_t); + desc = "32"; + } else + return -ENODEV; + + out: + si_meminfo(&s); + printk(MPT2SAS_INFO_FMT "%s BIT PCI BUS DMA ADDRESSING SUPPORTED, " + "total mem (%ld kB)\n", ioc->name, desc, convert_to_kb(s.totalram)); + + return 0; +} + +/** + * _base_save_msix_table - backup msix vector table + * @ioc: per adapter object + * + * This address an errata where diag reset clears out the table + */ +static void +_base_save_msix_table(struct MPT2SAS_ADAPTER *ioc) +{ + int i; + + if (!ioc->msix_enable || ioc->msix_table_backup == NULL) + return; + + for (i = 0; i < ioc->msix_vector_count; i++) + ioc->msix_table_backup[i] = ioc->msix_table[i]; +} + +/** + * _base_restore_msix_table - this restores the msix vector table + * @ioc: per adapter object + * + */ +static void +_base_restore_msix_table(struct MPT2SAS_ADAPTER *ioc) +{ + int i; + + if (!ioc->msix_enable || ioc->msix_table_backup == NULL) + return; + + for (i = 0; i < ioc->msix_vector_count; i++) + ioc->msix_table[i] = ioc->msix_table_backup[i]; +} + +/** + * _base_check_enable_msix - checks MSIX capabable. + * @ioc: per adapter object + * + * Check to see if card is capable of MSIX, and set number + * of avaliable msix vectors + */ +static int +_base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc) +{ + int base; + u16 message_control; + u32 msix_table_offset; + + base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX); + if (!base) { + dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "msix not " + "supported\n", ioc->name)); + return -EINVAL; + } + + /* get msix vector count */ + pci_read_config_word(ioc->pdev, base + 2, &message_control); + ioc->msix_vector_count = (message_control & 0x3FF) + 1; + + /* get msix table */ + pci_read_config_dword(ioc->pdev, base + 4, &msix_table_offset); + msix_table_offset &= 0xFFFFFFF8; + ioc->msix_table = (u32 *)((void *)ioc->chip + msix_table_offset); + + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "msix is supported, " + "vector_count(%d), table_offset(0x%08x), table(%p)\n", ioc->name, + ioc->msix_vector_count, msix_table_offset, ioc->msix_table)); + return 0; +} + +/** + * _base_disable_msix - disables msix + * @ioc: per adapter object + * + */ +static void +_base_disable_msix(struct MPT2SAS_ADAPTER *ioc) +{ + if (ioc->msix_enable) { + pci_disable_msix(ioc->pdev); + kfree(ioc->msix_table_backup); + ioc->msix_table_backup = NULL; + ioc->msix_enable = 0; + } +} + +/** + * _base_enable_msix - enables msix, failback to io_apic + * @ioc: per adapter object + * + */ +static int +_base_enable_msix(struct MPT2SAS_ADAPTER *ioc) +{ + struct msix_entry entries; + int r; + u8 try_msix = 0; + + if (msix_disable == -1 || msix_disable == 0) + try_msix = 1; + + if (!try_msix) + goto try_ioapic; + + if (_base_check_enable_msix(ioc) != 0) + goto try_ioapic; + + ioc->msix_table_backup = kcalloc(ioc->msix_vector_count, + sizeof(u32), GFP_KERNEL); + if (!ioc->msix_table_backup) { + dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "allocation for " + "msix_table_backup failed!!!\n", ioc->name)); + goto try_ioapic; + } + + memset(&entries, 0, sizeof(struct msix_entry)); + r = pci_enable_msix(ioc->pdev, &entries, 1); + if (r) { + dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "pci_enable_msix " + "failed (r=%d) !!!\n", ioc->name, r)); + goto try_ioapic; + } + + r = request_irq(entries.vector, _base_interrupt, IRQF_SHARED, + ioc->name, ioc); + if (r) { + dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "unable to allocate " + "interrupt %d !!!\n", ioc->name, entries.vector)); + pci_disable_msix(ioc->pdev); + goto try_ioapic; + } + + ioc->pci_irq = entries.vector; + ioc->msix_enable = 1; + return 0; + +/* failback to io_apic interrupt routing */ + try_ioapic: + + r = request_irq(ioc->pdev->irq, _base_interrupt, IRQF_SHARED, + ioc->name, ioc); + if (r) { + printk(MPT2SAS_ERR_FMT "unable to allocate interrupt %d!\n", + ioc->name, ioc->pdev->irq); + r = -EBUSY; + goto out_fail; + } + + ioc->pci_irq = ioc->pdev->irq; + return 0; + + out_fail: + return r; +} + +/** + * mpt2sas_base_map_resources - map in controller resources (io/irq/memap) + * @ioc: per adapter object + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc) +{ + struct pci_dev *pdev = ioc->pdev; + u32 memap_sz; + u32 pio_sz; + int i, r = 0; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", + ioc->name, __func__)); + + ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM); + if (pci_enable_device_mem(pdev)) { + printk(MPT2SAS_WARN_FMT "pci_enable_device_mem: " + "failed\n", ioc->name); + return -ENODEV; + } + + + if (pci_request_selected_regions(pdev, ioc->bars, + MPT2SAS_DRIVER_NAME)) { + printk(MPT2SAS_WARN_FMT "pci_request_selected_regions: " + "failed\n", ioc->name); + r = -ENODEV; + goto out_fail; + } + + pci_set_master(pdev); + + if (_base_config_dma_addressing(ioc, pdev) != 0) { + printk(MPT2SAS_WARN_FMT "no suitable DMA mask for %s\n", + ioc->name, pci_name(pdev)); + r = -ENODEV; + goto out_fail; + } + + for (i = 0, memap_sz = 0, pio_sz = 0 ; i < DEVICE_COUNT_RESOURCE; i++) { + if (pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE_IO) { + if (pio_sz) + continue; + ioc->pio_chip = pci_resource_start(pdev, i); + pio_sz = pci_resource_len(pdev, i); + } else { + if (memap_sz) + continue; + ioc->chip_phys = pci_resource_start(pdev, i); + memap_sz = pci_resource_len(pdev, i); + ioc->chip = ioremap(ioc->chip_phys, memap_sz); + if (ioc->chip == NULL) { + printk(MPT2SAS_ERR_FMT "unable to map adapter " + "memory!\n", ioc->name); + r = -EINVAL; + goto out_fail; + } + } + } + + pci_set_drvdata(pdev, ioc->shost); + _base_mask_interrupts(ioc); + r = _base_enable_msix(ioc); + if (r) + goto out_fail; + + printk(MPT2SAS_INFO_FMT "%s: IRQ %d\n", + ioc->name, ((ioc->msix_enable) ? "PCI-MSI-X enabled" : + "IO-APIC enabled"), ioc->pci_irq); + printk(MPT2SAS_INFO_FMT "iomem(0x%lx), mapped(0x%p), size(%d)\n", + ioc->name, ioc->chip_phys, ioc->chip, memap_sz); + printk(MPT2SAS_INFO_FMT "ioport(0x%lx), size(%d)\n", + ioc->name, ioc->pio_chip, pio_sz); + + return 0; + + out_fail: + if (ioc->chip_phys) + iounmap(ioc->chip); + ioc->chip_phys = 0; + ioc->pci_irq = -1; + pci_release_selected_regions(ioc->pdev, ioc->bars); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + return r; +} + +/** + * mpt2sas_base_get_msg_frame_dma - obtain request mf pointer phys addr + * @ioc: per adapter object + * @smid: system request message index(smid zero is invalid) + * + * Returns phys pointer to message frame. + */ +dma_addr_t +mpt2sas_base_get_msg_frame_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + return ioc->request_dma + (smid * ioc->request_sz); +} + +/** + * mpt2sas_base_get_msg_frame - obtain request mf pointer + * @ioc: per adapter object + * @smid: system request message index(smid zero is invalid) + * + * Returns virt pointer to message frame. + */ +void * +mpt2sas_base_get_msg_frame(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + return (void *)(ioc->request + (smid * ioc->request_sz)); +} + +/** + * mpt2sas_base_get_sense_buffer - obtain a sense buffer assigned to a mf request + * @ioc: per adapter object + * @smid: system request message index + * + * Returns virt pointer to sense buffer. + */ +void * +mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + return (void *)(ioc->sense + ((smid - 1) * SCSI_SENSE_BUFFERSIZE)); +} + +/** + * mpt2sas_base_get_sense_buffer_dma - obtain a sense buffer assigned to a mf request + * @ioc: per adapter object + * @smid: system request message index + * + * Returns phys pointer to sense buffer. + */ +dma_addr_t +mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + return ioc->sense_dma + ((smid - 1) * SCSI_SENSE_BUFFERSIZE); +} + +/** + * mpt2sas_base_get_reply_virt_addr - obtain reply frames virt address + * @ioc: per adapter object + * @phys_addr: lower 32 physical addr of the reply + * + * Converts 32bit lower physical addr into a virt address. + */ +void * +mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr) +{ + if (!phys_addr) + return NULL; + return ioc->reply + (phys_addr - (u32)ioc->reply_dma); +} + +/** + * mpt2sas_base_get_smid - obtain a free smid + * @ioc: per adapter object + * @cb_idx: callback index + * + * Returns smid (zero is invalid) + */ +u16 +mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx) +{ + unsigned long flags; + struct request_tracker *request; + u16 smid; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + if (list_empty(&ioc->free_list)) { + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + printk(MPT2SAS_ERR_FMT "%s: smid not available\n", + ioc->name, __func__); + return 0; + } + + request = list_entry(ioc->free_list.next, + struct request_tracker, tracker_list); + request->cb_idx = cb_idx; + smid = request->smid; + list_del(&request->tracker_list); + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return smid; +} + + +/** + * mpt2sas_base_free_smid - put smid back on free_list + * @ioc: per adapter object + * @smid: system request message index + * + * Return nothing. + */ +void +mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + ioc->scsi_lookup[smid - 1].cb_idx = 0xFF; + list_add_tail(&ioc->scsi_lookup[smid - 1].tracker_list, + &ioc->free_list); + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + + /* + * See _wait_for_commands_to_complete() call with regards to this code. + */ + if (ioc->shost_recovery && ioc->pending_io_count) { + if (ioc->pending_io_count == 1) + wake_up(&ioc->reset_wq); + ioc->pending_io_count--; + } +} + +/** + * _base_writeq - 64 bit write to MMIO + * @ioc: per adapter object + * @b: data payload + * @addr: address in MMIO space + * @writeq_lock: spin lock + * + * Glue for handling an atomic 64 bit word to MMIO. This special handling takes + * care of 32 bit environment where its not quarenteed to send the entire word + * in one transfer. + */ +#ifndef writeq +static inline void _base_writeq(__u64 b, volatile void __iomem *addr, + spinlock_t *writeq_lock) +{ + unsigned long flags; + __u64 data_out = cpu_to_le64(b); + + spin_lock_irqsave(writeq_lock, flags); + writel((u32)(data_out), addr); + writel((u32)(data_out >> 32), (addr + 4)); + spin_unlock_irqrestore(writeq_lock, flags); +} +#else +static inline void _base_writeq(__u64 b, volatile void __iomem *addr, + spinlock_t *writeq_lock) +{ + writeq(cpu_to_le64(b), addr); +} +#endif + +/** + * mpt2sas_base_put_smid_scsi_io - send SCSI_IO request to firmware + * @ioc: per adapter object + * @smid: system request message index + * @vf_id: virtual function id + * @handle: device handle + * + * Return nothing. + */ +void +mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id, + u16 handle) +{ + Mpi2RequestDescriptorUnion_t descriptor; + u64 *request = (u64 *)&descriptor; + + + descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO; + descriptor.SCSIIO.VF_ID = vf_id; + descriptor.SCSIIO.SMID = cpu_to_le16(smid); + descriptor.SCSIIO.DevHandle = cpu_to_le16(handle); + descriptor.SCSIIO.LMID = 0; + _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, + &ioc->scsi_lookup_lock); +} + + +/** + * mpt2sas_base_put_smid_hi_priority - send Task Managment request to firmware + * @ioc: per adapter object + * @smid: system request message index + * @vf_id: virtual function id + * + * Return nothing. + */ +void +mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid, + u8 vf_id) +{ + Mpi2RequestDescriptorUnion_t descriptor; + u64 *request = (u64 *)&descriptor; + + descriptor.HighPriority.RequestFlags = + MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY; + descriptor.HighPriority.VF_ID = vf_id; + descriptor.HighPriority.SMID = cpu_to_le16(smid); + descriptor.HighPriority.LMID = 0; + descriptor.HighPriority.Reserved1 = 0; + _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, + &ioc->scsi_lookup_lock); +} + +/** + * mpt2sas_base_put_smid_default - Default, primarily used for config pages + * @ioc: per adapter object + * @smid: system request message index + * @vf_id: virtual function id + * + * Return nothing. + */ +void +mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id) +{ + Mpi2RequestDescriptorUnion_t descriptor; + u64 *request = (u64 *)&descriptor; + + descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; + descriptor.Default.VF_ID = vf_id; + descriptor.Default.SMID = cpu_to_le16(smid); + descriptor.Default.LMID = 0; + descriptor.Default.DescriptorTypeDependent = 0; + _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, + &ioc->scsi_lookup_lock); +} + +/** + * mpt2sas_base_put_smid_target_assist - send Target Assist/Status to firmware + * @ioc: per adapter object + * @smid: system request message index + * @vf_id: virtual function id + * @io_index: value used to track the IO + * + * Return nothing. + */ +void +mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid, + u8 vf_id, u16 io_index) +{ + Mpi2RequestDescriptorUnion_t descriptor; + u64 *request = (u64 *)&descriptor; + + descriptor.SCSITarget.RequestFlags = + MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET; + descriptor.SCSITarget.VF_ID = vf_id; + descriptor.SCSITarget.SMID = cpu_to_le16(smid); + descriptor.SCSITarget.LMID = 0; + descriptor.SCSITarget.IoIndex = cpu_to_le16(io_index); + _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, + &ioc->scsi_lookup_lock); +} + +/** + * _base_display_ioc_capabilities - Disply IOC's capabilities. + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc) +{ + int i = 0; + char desc[16]; + u8 revision; + u32 iounit_pg1_flags; + + pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision); + strncpy(desc, ioc->manu_pg0.ChipName, 16); + printk(MPT2SAS_INFO_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), " + "ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n", + ioc->name, desc, + (ioc->facts.FWVersion.Word & 0xFF000000) >> 24, + (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16, + (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8, + ioc->facts.FWVersion.Word & 0x000000FF, + revision, + (ioc->bios_pg3.BiosVersion & 0xFF000000) >> 24, + (ioc->bios_pg3.BiosVersion & 0x00FF0000) >> 16, + (ioc->bios_pg3.BiosVersion & 0x0000FF00) >> 8, + ioc->bios_pg3.BiosVersion & 0x000000FF); + + printk(MPT2SAS_INFO_FMT "Protocol=(", ioc->name); + + if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR) { + printk("Initiator"); + i++; + } + + if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET) { + printk("%sTarget", i ? "," : ""); + i++; + } + + i = 0; + printk("), "); + printk("Capabilities=("); + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) { + printk("Raid"); + i++; + } + + if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) { + printk("%sTLR", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_MULTICAST) { + printk("%sMulticast", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET) { + printk("%sBIDI Target", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) { + printk("%sEEDP", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) { + printk("%sSnapshot Buffer", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) { + printk("%sDiag Trace Buffer", i ? "," : ""); + i++; + } + + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING) { + printk("%sTask Set Full", i ? "," : ""); + i++; + } + + iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags); + if (!(iounit_pg1_flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE)) { + printk("%sNCQ", i ? "," : ""); + i++; + } + + printk(")\n"); +} + +/** + * _base_static_config_pages - static start of day config pages + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_base_static_config_pages(struct MPT2SAS_ADAPTER *ioc) +{ + Mpi2ConfigReply_t mpi_reply; + u32 iounit_pg1_flags; + + mpt2sas_config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0); + mpt2sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2); + mpt2sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3); + mpt2sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8); + mpt2sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0); + mpt2sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1); + _base_display_ioc_capabilities(ioc); + + /* + * Enable task_set_full handling in iounit_pg1 when the + * facts capabilities indicate that its supported. + */ + iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags); + if ((ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING)) + iounit_pg1_flags &= + ~MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING; + else + iounit_pg1_flags |= + MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING; + ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags); + mpt2sas_config_set_iounit_pg1(ioc, &mpi_reply, ioc->iounit_pg1); +} + +/** + * _base_release_memory_pools - release memory + * @ioc: per adapter object + * + * Free memory allocated from _base_allocate_memory_pools. + * + * Return nothing. + */ +static void +_base_release_memory_pools(struct MPT2SAS_ADAPTER *ioc) +{ + dexitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + if (ioc->request) { + pci_free_consistent(ioc->pdev, ioc->request_dma_sz, + ioc->request, ioc->request_dma); + dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "request_pool(0x%p)" + ": free\n", ioc->name, ioc->request)); + ioc->request = NULL; + } + + if (ioc->sense) { + pci_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma); + if (ioc->sense_dma_pool) + pci_pool_destroy(ioc->sense_dma_pool); + dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "sense_pool(0x%p)" + ": free\n", ioc->name, ioc->sense)); + ioc->sense = NULL; + } + + if (ioc->reply) { + pci_pool_free(ioc->reply_dma_pool, ioc->reply, ioc->reply_dma); + if (ioc->reply_dma_pool) + pci_pool_destroy(ioc->reply_dma_pool); + dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_pool(0x%p)" + ": free\n", ioc->name, ioc->reply)); + ioc->reply = NULL; + } + + if (ioc->reply_free) { + pci_pool_free(ioc->reply_free_dma_pool, ioc->reply_free, + ioc->reply_free_dma); + if (ioc->reply_free_dma_pool) + pci_pool_destroy(ioc->reply_free_dma_pool); + dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free_pool" + "(0x%p): free\n", ioc->name, ioc->reply_free)); + ioc->reply_free = NULL; + } + + if (ioc->reply_post_free) { + pci_pool_free(ioc->reply_post_free_dma_pool, + ioc->reply_post_free, ioc->reply_post_free_dma); + if (ioc->reply_post_free_dma_pool) + pci_pool_destroy(ioc->reply_post_free_dma_pool); + dexitprintk(ioc, printk(MPT2SAS_INFO_FMT + "reply_post_free_pool(0x%p): free\n", ioc->name, + ioc->reply_post_free)); + ioc->reply_post_free = NULL; + } + + if (ioc->config_page) { + dexitprintk(ioc, printk(MPT2SAS_INFO_FMT + "config_page(0x%p): free\n", ioc->name, + ioc->config_page)); + pci_free_consistent(ioc->pdev, ioc->config_page_sz, + ioc->config_page, ioc->config_page_dma); + } + + kfree(ioc->scsi_lookup); +} + + +/** + * _base_allocate_memory_pools - allocate start of day memory pools + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 success, anything else error + */ +static int +_base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) +{ + Mpi2IOCFactsReply_t *facts; + u32 queue_size, queue_diff; + u16 max_sge_elements; + u16 num_of_reply_frames; + u16 chains_needed_per_io; + u32 sz, total_sz; + u16 i; + u32 retry_sz; + u16 max_request_credit; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + retry_sz = 0; + facts = &ioc->facts; + + /* command line tunables for max sgl entries */ + if (max_sgl_entries != -1) { + ioc->shost->sg_tablesize = (max_sgl_entries < + MPT2SAS_SG_DEPTH) ? max_sgl_entries : + MPT2SAS_SG_DEPTH; + } else { + ioc->shost->sg_tablesize = MPT2SAS_SG_DEPTH; + } + + /* command line tunables for max controller queue depth */ + if (max_queue_depth != -1) { + max_request_credit = (max_queue_depth < facts->RequestCredit) + ? max_queue_depth : facts->RequestCredit; + } else { + max_request_credit = (facts->RequestCredit > + MPT2SAS_MAX_REQUEST_QUEUE) ? MPT2SAS_MAX_REQUEST_QUEUE : + facts->RequestCredit; + } + ioc->request_depth = max_request_credit; + + /* request frame size */ + ioc->request_sz = facts->IOCRequestFrameSize * 4; + + /* reply frame size */ + ioc->reply_sz = facts->ReplyFrameSize * 4; + + retry_allocation: + total_sz = 0; + /* calculate number of sg elements left over in the 1st frame */ + max_sge_elements = ioc->request_sz - ((sizeof(Mpi2SCSIIORequest_t) - + sizeof(Mpi2SGEIOUnion_t)) + ioc->sge_size); + ioc->max_sges_in_main_message = max_sge_elements/ioc->sge_size; + + /* now do the same for a chain buffer */ + max_sge_elements = ioc->request_sz - ioc->sge_size; + ioc->max_sges_in_chain_message = max_sge_elements/ioc->sge_size; + + ioc->chain_offset_value_for_main_message = + ((sizeof(Mpi2SCSIIORequest_t) - sizeof(Mpi2SGEIOUnion_t)) + + (ioc->max_sges_in_chain_message * ioc->sge_size)) / 4; + + /* + * MPT2SAS_SG_DEPTH = CONFIG_FUSION_MAX_SGE + */ + chains_needed_per_io = ((ioc->shost->sg_tablesize - + ioc->max_sges_in_main_message)/ioc->max_sges_in_chain_message) + + 1; + if (chains_needed_per_io > facts->MaxChainDepth) { + chains_needed_per_io = facts->MaxChainDepth; + ioc->shost->sg_tablesize = min_t(u16, + ioc->max_sges_in_main_message + (ioc->max_sges_in_chain_message + * chains_needed_per_io), ioc->shost->sg_tablesize); + } + ioc->chains_needed_per_io = chains_needed_per_io; + + /* reply free queue sizing - taking into account for events */ + num_of_reply_frames = ioc->request_depth + 32; + + /* number of replies frames can't be a multiple of 16 */ + /* decrease number of reply frames by 1 */ + if (!(num_of_reply_frames % 16)) + num_of_reply_frames--; + + /* calculate number of reply free queue entries + * (must be multiple of 16) + */ + + /* (we know reply_free_queue_depth is not a multiple of 16) */ + queue_size = num_of_reply_frames; + queue_size += 16 - (queue_size % 16); + ioc->reply_free_queue_depth = queue_size; + + /* reply descriptor post queue sizing */ + /* this size should be the number of request frames + number of reply + * frames + */ + + queue_size = ioc->request_depth + num_of_reply_frames + 1; + /* round up to 16 byte boundary */ + if (queue_size % 16) + queue_size += 16 - (queue_size % 16); + + /* check against IOC maximum reply post queue depth */ + if (queue_size > facts->MaxReplyDescriptorPostQueueDepth) { + queue_diff = queue_size - + facts->MaxReplyDescriptorPostQueueDepth; + + /* round queue_diff up to multiple of 16 */ + if (queue_diff % 16) + queue_diff += 16 - (queue_diff % 16); + + /* adjust request_depth, reply_free_queue_depth, + * and queue_size + */ + ioc->request_depth -= queue_diff; + ioc->reply_free_queue_depth -= queue_diff; + queue_size -= queue_diff; + } + ioc->reply_post_queue_depth = queue_size; + + /* max scsi host queue depth */ + ioc->shost->can_queue = ioc->request_depth - INTERNAL_CMDS_COUNT; + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsi host queue: depth" + "(%d)\n", ioc->name, ioc->shost->can_queue)); + + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scatter gather: " + "sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), " + "chains_per_io(%d)\n", ioc->name, ioc->max_sges_in_main_message, + ioc->max_sges_in_chain_message, ioc->shost->sg_tablesize, + ioc->chains_needed_per_io)); + + /* contiguous pool for request and chains, 16 byte align, one extra " + * "frame for smid=0 + */ + ioc->chain_depth = ioc->chains_needed_per_io * ioc->request_depth; + sz = ((ioc->request_depth + 1 + ioc->chain_depth) * ioc->request_sz); + + ioc->request_dma_sz = sz; + ioc->request = pci_alloc_consistent(ioc->pdev, sz, &ioc->request_dma); + if (!ioc->request) { + printk(MPT2SAS_ERR_FMT "request pool: pci_alloc_consistent " + "failed: req_depth(%d), chains_per_io(%d), frame_sz(%d), " + "total(%d kB)\n", ioc->name, ioc->request_depth, + ioc->chains_needed_per_io, ioc->request_sz, sz/1024); + if (ioc->request_depth < MPT2SAS_SAS_QUEUE_DEPTH) + goto out; + retry_sz += 64; + ioc->request_depth = max_request_credit - retry_sz; + goto retry_allocation; + } + + if (retry_sz) + printk(MPT2SAS_ERR_FMT "request pool: pci_alloc_consistent " + "succeed: req_depth(%d), chains_per_io(%d), frame_sz(%d), " + "total(%d kb)\n", ioc->name, ioc->request_depth, + ioc->chains_needed_per_io, ioc->request_sz, sz/1024); + + ioc->chain = ioc->request + ((ioc->request_depth + 1) * + ioc->request_sz); + ioc->chain_dma = ioc->request_dma + ((ioc->request_depth + 1) * + ioc->request_sz); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request pool(0x%p): " + "depth(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, + ioc->request, ioc->request_depth, ioc->request_sz, + ((ioc->request_depth + 1) * ioc->request_sz)/1024)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "chain pool(0x%p): depth" + "(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, ioc->chain, + ioc->chain_depth, ioc->request_sz, ((ioc->chain_depth * + ioc->request_sz))/1024)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request pool: dma(0x%llx)\n", + ioc->name, (unsigned long long) ioc->request_dma)); + total_sz += sz; + + ioc->scsi_lookup = kcalloc(ioc->request_depth, + sizeof(struct request_tracker), GFP_KERNEL); + if (!ioc->scsi_lookup) { + printk(MPT2SAS_ERR_FMT "scsi_lookup: kcalloc failed\n", + ioc->name); + goto out; + } + + /* initialize some bits */ + for (i = 0; i < ioc->request_depth; i++) + ioc->scsi_lookup[i].smid = i + 1; + + /* sense buffers, 4 byte align */ + sz = ioc->request_depth * SCSI_SENSE_BUFFERSIZE; + ioc->sense_dma_pool = pci_pool_create("sense pool", ioc->pdev, sz, 4, + 0); + if (!ioc->sense_dma_pool) { + printk(MPT2SAS_ERR_FMT "sense pool: pci_pool_create failed\n", + ioc->name); + goto out; + } + ioc->sense = pci_pool_alloc(ioc->sense_dma_pool , GFP_KERNEL, + &ioc->sense_dma); + if (!ioc->sense) { + printk(MPT2SAS_ERR_FMT "sense pool: pci_pool_alloc failed\n", + ioc->name); + goto out; + } + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT + "sense pool(0x%p): depth(%d), element_size(%d), pool_size" + "(%d kB)\n", ioc->name, ioc->sense, ioc->request_depth, + SCSI_SENSE_BUFFERSIZE, sz/1024)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "sense_dma(0x%llx)\n", + ioc->name, (unsigned long long)ioc->sense_dma)); + total_sz += sz; + + /* reply pool, 4 byte align */ + sz = ioc->reply_free_queue_depth * ioc->reply_sz; + ioc->reply_dma_pool = pci_pool_create("reply pool", ioc->pdev, sz, 4, + 0); + if (!ioc->reply_dma_pool) { + printk(MPT2SAS_ERR_FMT "reply pool: pci_pool_create failed\n", + ioc->name); + goto out; + } + ioc->reply = pci_pool_alloc(ioc->reply_dma_pool , GFP_KERNEL, + &ioc->reply_dma); + if (!ioc->reply) { + printk(MPT2SAS_ERR_FMT "reply pool: pci_pool_alloc failed\n", + ioc->name); + goto out; + } + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply pool(0x%p): depth" + "(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, ioc->reply, + ioc->reply_free_queue_depth, ioc->reply_sz, sz/1024)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_dma(0x%llx)\n", + ioc->name, (unsigned long long)ioc->reply_dma)); + total_sz += sz; + + /* reply free queue, 16 byte align */ + sz = ioc->reply_free_queue_depth * 4; + ioc->reply_free_dma_pool = pci_pool_create("reply_free pool", + ioc->pdev, sz, 16, 0); + if (!ioc->reply_free_dma_pool) { + printk(MPT2SAS_ERR_FMT "reply_free pool: pci_pool_create " + "failed\n", ioc->name); + goto out; + } + ioc->reply_free = pci_pool_alloc(ioc->reply_free_dma_pool , GFP_KERNEL, + &ioc->reply_free_dma); + if (!ioc->reply_free) { + printk(MPT2SAS_ERR_FMT "reply_free pool: pci_pool_alloc " + "failed\n", ioc->name); + goto out; + } + memset(ioc->reply_free, 0, sz); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free pool(0x%p): " + "depth(%d), element_size(%d), pool_size(%d kB)\n", ioc->name, + ioc->reply_free, ioc->reply_free_queue_depth, 4, sz/1024)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free_dma" + "(0x%llx)\n", ioc->name, (unsigned long long)ioc->reply_free_dma)); + total_sz += sz; + + /* reply post queue, 16 byte align */ + sz = ioc->reply_post_queue_depth * sizeof(Mpi2DefaultReplyDescriptor_t); + ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool", + ioc->pdev, sz, 16, 0); + if (!ioc->reply_post_free_dma_pool) { + printk(MPT2SAS_ERR_FMT "reply_post_free pool: pci_pool_create " + "failed\n", ioc->name); + goto out; + } + ioc->reply_post_free = pci_pool_alloc(ioc->reply_post_free_dma_pool , + GFP_KERNEL, &ioc->reply_post_free_dma); + if (!ioc->reply_post_free) { + printk(MPT2SAS_ERR_FMT "reply_post_free pool: pci_pool_alloc " + "failed\n", ioc->name); + goto out; + } + memset(ioc->reply_post_free, 0, sz); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply post free pool" + "(0x%p): depth(%d), element_size(%d), pool_size(%d kB)\n", + ioc->name, ioc->reply_post_free, ioc->reply_post_queue_depth, 8, + sz/1024)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_post_free_dma = " + "(0x%llx)\n", ioc->name, (unsigned long long) + ioc->reply_post_free_dma)); + total_sz += sz; + + ioc->config_page_sz = 512; + ioc->config_page = pci_alloc_consistent(ioc->pdev, + ioc->config_page_sz, &ioc->config_page_dma); + if (!ioc->config_page) { + printk(MPT2SAS_ERR_FMT "config page: pci_pool_alloc " + "failed\n", ioc->name); + goto out; + } + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "config page(0x%p): size" + "(%d)\n", ioc->name, ioc->config_page, ioc->config_page_sz)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "config_page_dma" + "(0x%llx)\n", ioc->name, (unsigned long long)ioc->config_page_dma)); + total_sz += ioc->config_page_sz; + + printk(MPT2SAS_INFO_FMT "Allocated physical memory: size(%d kB)\n", + ioc->name, total_sz/1024); + printk(MPT2SAS_INFO_FMT "Current Controller Queue Depth(%d), " + "Max Controller Queue Depth(%d)\n", + ioc->name, ioc->shost->can_queue, facts->RequestCredit); + printk(MPT2SAS_INFO_FMT "Scatter Gather Elements per IO(%d)\n", + ioc->name, ioc->shost->sg_tablesize); + return 0; + + out: + _base_release_memory_pools(ioc); + return -ENOMEM; +} + + +/** + * mpt2sas_base_get_iocstate - Get the current state of a MPT adapter. + * @ioc: Pointer to MPT_ADAPTER structure + * @cooked: Request raw or cooked IOC state + * + * Returns all IOC Doorbell register bits if cooked==0, else just the + * Doorbell bits in MPI_IOC_STATE_MASK. + */ +u32 +mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked) +{ + u32 s, sc; + + s = readl(&ioc->chip->Doorbell); + sc = s & MPI2_IOC_STATE_MASK; + return cooked ? sc : s; +} + +/** + * _base_wait_on_iocstate - waiting on a particular ioc state + * @ioc_state: controller state { READY, OPERATIONAL, or RESET } + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_wait_on_iocstate(struct MPT2SAS_ADAPTER *ioc, u32 ioc_state, int timeout, + int sleep_flag) +{ + u32 count, cntdn; + u32 current_state; + + count = 0; + cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; + do { + current_state = mpt2sas_base_get_iocstate(ioc, 1); + if (current_state == ioc_state) + return 0; + if (count && current_state == MPI2_IOC_STATE_FAULT) + break; + if (sleep_flag == CAN_SLEEP) + msleep(1); + else + udelay(500); + count++; + } while (--cntdn); + + return current_state; +} + +/** + * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by + * a write to the doorbell) + * @ioc: per adapter object + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + * + * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell. + */ +static int +_base_wait_for_doorbell_int(struct MPT2SAS_ADAPTER *ioc, int timeout, + int sleep_flag) +{ + u32 cntdn, count; + u32 int_status; + + count = 0; + cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; + do { + int_status = readl(&ioc->chip->HostInterruptStatus); + if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { + dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "successfull count(%d), timeout(%d)\n", ioc->name, + __func__, count, timeout)); + return 0; + } + if (sleep_flag == CAN_SLEEP) + msleep(1); + else + udelay(500); + count++; + } while (--cntdn); + + printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), " + "int_status(%x)!\n", ioc->name, __func__, count, int_status); + return -EFAULT; +} + +/** + * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell. + * @ioc: per adapter object + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + * + * Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to + * doorbell. + */ +static int +_base_wait_for_doorbell_ack(struct MPT2SAS_ADAPTER *ioc, int timeout, + int sleep_flag) +{ + u32 cntdn, count; + u32 int_status; + u32 doorbell; + + count = 0; + cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; + do { + int_status = readl(&ioc->chip->HostInterruptStatus); + if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) { + dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "successfull count(%d), timeout(%d)\n", ioc->name, + __func__, count, timeout)); + return 0; + } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { + doorbell = readl(&ioc->chip->Doorbell); + if ((doorbell & MPI2_IOC_STATE_MASK) == + MPI2_IOC_STATE_FAULT) { + mpt2sas_base_fault_info(ioc , doorbell); + return -EFAULT; + } + } else if (int_status == 0xFFFFFFFF) + goto out; + + if (sleep_flag == CAN_SLEEP) + msleep(1); + else + udelay(500); + count++; + } while (--cntdn); + + out: + printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), " + "int_status(%x)!\n", ioc->name, __func__, count, int_status); + return -EFAULT; +} + +/** + * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use + * @ioc: per adapter object + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + * + */ +static int +_base_wait_for_doorbell_not_used(struct MPT2SAS_ADAPTER *ioc, int timeout, + int sleep_flag) +{ + u32 cntdn, count; + u32 doorbell_reg; + + count = 0; + cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; + do { + doorbell_reg = readl(&ioc->chip->Doorbell); + if (!(doorbell_reg & MPI2_DOORBELL_USED)) { + dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "successfull count(%d), timeout(%d)\n", ioc->name, + __func__, count, timeout)); + return 0; + } + if (sleep_flag == CAN_SLEEP) + msleep(1); + else + udelay(500); + count++; + } while (--cntdn); + + printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), " + "doorbell_reg(%x)!\n", ioc->name, __func__, count, doorbell_reg); + return -EFAULT; +} + +/** + * _base_send_ioc_reset - send doorbell reset + * @ioc: per adapter object + * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_send_ioc_reset(struct MPT2SAS_ADAPTER *ioc, u8 reset_type, int timeout, + int sleep_flag) +{ + u32 ioc_state; + int r = 0; + + if (reset_type != MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET) { + printk(MPT2SAS_ERR_FMT "%s: unknown reset_type\n", + ioc->name, __func__); + return -EFAULT; + } + + if (!(ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY)) + return -EFAULT; + + printk(MPT2SAS_INFO_FMT "sending message unit reset !!\n", ioc->name); + + writel(reset_type << MPI2_DOORBELL_FUNCTION_SHIFT, + &ioc->chip->Doorbell); + if ((_base_wait_for_doorbell_ack(ioc, 15, sleep_flag))) { + r = -EFAULT; + goto out; + } + ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, + timeout, sleep_flag); + if (ioc_state) { + printk(MPT2SAS_ERR_FMT "%s: failed going to ready state " + " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state); + r = -EFAULT; + goto out; + } + out: + printk(MPT2SAS_INFO_FMT "message unit reset: %s\n", + ioc->name, ((r == 0) ? "SUCCESS" : "FAILED")); + return r; +} + +/** + * _base_handshake_req_reply_wait - send request thru doorbell interface + * @ioc: per adapter object + * @request_bytes: request length + * @request: pointer having request payload + * @reply_bytes: reply length + * @reply: pointer to reply payload + * @timeout: timeout in second + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_handshake_req_reply_wait(struct MPT2SAS_ADAPTER *ioc, int request_bytes, + u32 *request, int reply_bytes, u16 *reply, int timeout, int sleep_flag) +{ + MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply; + int i; + u8 failed; + u16 dummy; + u32 *mfp; + + /* make sure doorbell is not in use */ + if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) { + printk(MPT2SAS_ERR_FMT "doorbell is in use " + " (line=%d)\n", ioc->name, __LINE__); + return -EFAULT; + } + + /* clear pending doorbell interrupts from previous state changes */ + if (readl(&ioc->chip->HostInterruptStatus) & + MPI2_HIS_IOC2SYS_DB_STATUS) + writel(0, &ioc->chip->HostInterruptStatus); + + /* send message to ioc */ + writel(((MPI2_FUNCTION_HANDSHAKE<<MPI2_DOORBELL_FUNCTION_SHIFT) | + ((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)), + &ioc->chip->Doorbell); + + if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) { + printk(MPT2SAS_ERR_FMT "doorbell handshake " + "int failed (line=%d)\n", ioc->name, __LINE__); + return -EFAULT; + } + writel(0, &ioc->chip->HostInterruptStatus); + + if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) { + printk(MPT2SAS_ERR_FMT "doorbell handshake " + "ack failed (line=%d)\n", ioc->name, __LINE__); + return -EFAULT; + } + + /* send message 32-bits at a time */ + for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) { + writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell); + if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) + failed = 1; + } + + if (failed) { + printk(MPT2SAS_ERR_FMT "doorbell handshake " + "sending request failed (line=%d)\n", ioc->name, __LINE__); + return -EFAULT; + } + + /* now wait for the reply */ + if ((_base_wait_for_doorbell_int(ioc, timeout, sleep_flag))) { + printk(MPT2SAS_ERR_FMT "doorbell handshake " + "int failed (line=%d)\n", ioc->name, __LINE__); + return -EFAULT; + } + + /* read the first two 16-bits, it gives the total length of the reply */ + reply[0] = le16_to_cpu(readl(&ioc->chip->Doorbell) + & MPI2_DOORBELL_DATA_MASK); + writel(0, &ioc->chip->HostInterruptStatus); + if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) { + printk(MPT2SAS_ERR_FMT "doorbell handshake " + "int failed (line=%d)\n", ioc->name, __LINE__); + return -EFAULT; + } + reply[1] = le16_to_cpu(readl(&ioc->chip->Doorbell) + & MPI2_DOORBELL_DATA_MASK); + writel(0, &ioc->chip->HostInterruptStatus); + + for (i = 2; i < default_reply->MsgLength * 2; i++) { + if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) { + printk(MPT2SAS_ERR_FMT "doorbell " + "handshake int failed (line=%d)\n", ioc->name, + __LINE__); + return -EFAULT; + } + if (i >= reply_bytes/2) /* overflow case */ + dummy = readl(&ioc->chip->Doorbell); + else + reply[i] = le16_to_cpu(readl(&ioc->chip->Doorbell) + & MPI2_DOORBELL_DATA_MASK); + writel(0, &ioc->chip->HostInterruptStatus); + } + + _base_wait_for_doorbell_int(ioc, 5, sleep_flag); + if (_base_wait_for_doorbell_not_used(ioc, 5, sleep_flag) != 0) { + dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "doorbell is in use " + " (line=%d)\n", ioc->name, __LINE__)); + } + writel(0, &ioc->chip->HostInterruptStatus); + + if (ioc->logging_level & MPT_DEBUG_INIT) { + mfp = (u32 *)reply; + printk(KERN_DEBUG "\toffset:data\n"); + for (i = 0; i < reply_bytes/4; i++) + printk(KERN_DEBUG "\t[0x%02x]:%08x\n", i*4, + le32_to_cpu(mfp[i])); + } + return 0; +} + +/** + * mpt2sas_base_sas_iounit_control - send sas iounit control to FW + * @ioc: per adapter object + * @mpi_reply: the reply payload from FW + * @mpi_request: the request payload sent to FW + * + * The SAS IO Unit Control Request message allows the host to perform low-level + * operations, such as resets on the PHYs of the IO Unit, also allows the host + * to obtain the IOC assigned device handles for a device if it has other + * identifying information about the device, in addition allows the host to + * remove IOC resources associated with the device. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc, + Mpi2SasIoUnitControlReply_t *mpi_reply, + Mpi2SasIoUnitControlRequest_t *mpi_request) +{ + u16 smid; + u32 ioc_state; + unsigned long timeleft; + u8 issue_reset; + int rc; + void *request; + u16 wait_state_count; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + mutex_lock(&ioc->base_cmds.mutex); + + if (ioc->base_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_ERR_FMT "%s: base_cmd in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + wait_state_count = 0; + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + printk(MPT2SAS_ERR_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + ssleep(1); + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + printk(MPT2SAS_INFO_FMT "%s: waiting for " + "operational state(count=%d)\n", ioc->name, + __func__, wait_state_count); + } + + smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + ioc->base_cmds.status = MPT2_CMD_PENDING; + request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->base_cmds.smid = smid; + memcpy(request, mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t)); + if (mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET || + mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) + ioc->ioc_link_reset_in_progress = 1; + mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID); + timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, + msecs_to_jiffies(10000)); + if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET || + mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) && + ioc->ioc_link_reset_in_progress) + ioc->ioc_link_reset_in_progress = 0; + if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SasIoUnitControlRequest_t)/4); + if (!(ioc->base_cmds.status & MPT2_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID) + memcpy(mpi_reply, ioc->base_cmds.reply, + sizeof(Mpi2SasIoUnitControlReply_t)); + else + memset(mpi_reply, 0, sizeof(Mpi2SasIoUnitControlReply_t)); + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + goto out; + + issue_host_reset: + if (issue_reset) + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + rc = -EFAULT; + out: + mutex_unlock(&ioc->base_cmds.mutex); + return rc; +} + + +/** + * mpt2sas_base_scsi_enclosure_processor - sending request to sep device + * @ioc: per adapter object + * @mpi_reply: the reply payload from FW + * @mpi_request: the request payload sent to FW + * + * The SCSI Enclosure Processor request message causes the IOC to + * communicate with SES devices to control LED status signals. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc, + Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request) +{ + u16 smid; + u32 ioc_state; + unsigned long timeleft; + u8 issue_reset; + int rc; + void *request; + u16 wait_state_count; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + mutex_lock(&ioc->base_cmds.mutex); + + if (ioc->base_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_ERR_FMT "%s: base_cmd in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + wait_state_count = 0; + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + printk(MPT2SAS_ERR_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + ssleep(1); + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + printk(MPT2SAS_INFO_FMT "%s: waiting for " + "operational state(count=%d)\n", ioc->name, + __func__, wait_state_count); + } + + smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + ioc->base_cmds.status = MPT2_CMD_PENDING; + request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->base_cmds.smid = smid; + memcpy(request, mpi_request, sizeof(Mpi2SepReply_t)); + mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID); + timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, + msecs_to_jiffies(10000)); + if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SepRequest_t)/4); + if (!(ioc->base_cmds.status & MPT2_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID) + memcpy(mpi_reply, ioc->base_cmds.reply, + sizeof(Mpi2SepReply_t)); + else + memset(mpi_reply, 0, sizeof(Mpi2SepReply_t)); + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + goto out; + + issue_host_reset: + if (issue_reset) + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + rc = -EFAULT; + out: + mutex_unlock(&ioc->base_cmds.mutex); + return rc; +} + +/** + * _base_get_port_facts - obtain port facts reply and save in ioc + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_get_port_facts(struct MPT2SAS_ADAPTER *ioc, int port, int sleep_flag) +{ + Mpi2PortFactsRequest_t mpi_request; + Mpi2PortFactsReply_t mpi_reply, *pfacts; + int mpi_reply_sz, mpi_request_sz, r; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + mpi_reply_sz = sizeof(Mpi2PortFactsReply_t); + mpi_request_sz = sizeof(Mpi2PortFactsRequest_t); + memset(&mpi_request, 0, mpi_request_sz); + mpi_request.Function = MPI2_FUNCTION_PORT_FACTS; + mpi_request.PortNumber = port; + r = _base_handshake_req_reply_wait(ioc, mpi_request_sz, + (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP); + + if (r != 0) { + printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n", + ioc->name, __func__, r); + return r; + } + + pfacts = &ioc->pfacts[port]; + memset(pfacts, 0, sizeof(Mpi2PortFactsReply_t)); + pfacts->PortNumber = mpi_reply.PortNumber; + pfacts->VP_ID = mpi_reply.VP_ID; + pfacts->VF_ID = mpi_reply.VF_ID; + pfacts->MaxPostedCmdBuffers = + le16_to_cpu(mpi_reply.MaxPostedCmdBuffers); + + return 0; +} + +/** + * _base_get_ioc_facts - obtain ioc facts reply and save in ioc + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_get_ioc_facts(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) +{ + Mpi2IOCFactsRequest_t mpi_request; + Mpi2IOCFactsReply_t mpi_reply, *facts; + int mpi_reply_sz, mpi_request_sz, r; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t); + mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t); + memset(&mpi_request, 0, mpi_request_sz); + mpi_request.Function = MPI2_FUNCTION_IOC_FACTS; + r = _base_handshake_req_reply_wait(ioc, mpi_request_sz, + (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP); + + if (r != 0) { + printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n", + ioc->name, __func__, r); + return r; + } + + facts = &ioc->facts; + memset(facts, 0, sizeof(Mpi2IOCFactsReply_t)); + facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion); + facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion); + facts->VP_ID = mpi_reply.VP_ID; + facts->VF_ID = mpi_reply.VF_ID; + facts->IOCExceptions = le16_to_cpu(mpi_reply.IOCExceptions); + facts->MaxChainDepth = mpi_reply.MaxChainDepth; + facts->WhoInit = mpi_reply.WhoInit; + facts->NumberOfPorts = mpi_reply.NumberOfPorts; + facts->RequestCredit = le16_to_cpu(mpi_reply.RequestCredit); + facts->MaxReplyDescriptorPostQueueDepth = + le16_to_cpu(mpi_reply.MaxReplyDescriptorPostQueueDepth); + facts->ProductID = le16_to_cpu(mpi_reply.ProductID); + facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities); + if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID)) + ioc->ir_firmware = 1; + facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word); + facts->IOCRequestFrameSize = + le16_to_cpu(mpi_reply.IOCRequestFrameSize); + facts->MaxInitiators = le16_to_cpu(mpi_reply.MaxInitiators); + facts->MaxTargets = le16_to_cpu(mpi_reply.MaxTargets); + ioc->shost->max_id = -1; + facts->MaxSasExpanders = le16_to_cpu(mpi_reply.MaxSasExpanders); + facts->MaxEnclosures = le16_to_cpu(mpi_reply.MaxEnclosures); + facts->ProtocolFlags = le16_to_cpu(mpi_reply.ProtocolFlags); + facts->HighPriorityCredit = + le16_to_cpu(mpi_reply.HighPriorityCredit); + facts->ReplyFrameSize = mpi_reply.ReplyFrameSize; + facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle); + + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "hba queue depth(%d), " + "max chains per io(%d)\n", ioc->name, facts->RequestCredit, + facts->MaxChainDepth)); + dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request frame size(%d), " + "reply frame size(%d)\n", ioc->name, + facts->IOCRequestFrameSize * 4, facts->ReplyFrameSize * 4)); + return 0; +} + +/** + * _base_send_ioc_init - send ioc_init to firmware + * @ioc: per adapter object + * @VF_ID: virtual function id + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, int sleep_flag) +{ + Mpi2IOCInitRequest_t mpi_request; + Mpi2IOCInitReply_t mpi_reply; + int r; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + memset(&mpi_request, 0, sizeof(Mpi2IOCInitRequest_t)); + mpi_request.Function = MPI2_FUNCTION_IOC_INIT; + mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER; + mpi_request.VF_ID = VF_ID; + mpi_request.MsgVersion = cpu_to_le16(MPI2_VERSION); + mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION); + + /* In MPI Revision I (0xA), the SystemReplyFrameSize(offset 0x18) was + * removed and made reserved. For those with older firmware will need + * this fix. It was decided that the Reply and Request frame sizes are + * the same. + */ + if ((ioc->facts.HeaderVersion >> 8) < 0xA) { + mpi_request.Reserved7 = cpu_to_le16(ioc->reply_sz); +/* mpi_request.SystemReplyFrameSize = + * cpu_to_le16(ioc->reply_sz); + */ + } + + mpi_request.SystemRequestFrameSize = cpu_to_le16(ioc->request_sz/4); + mpi_request.ReplyDescriptorPostQueueDepth = + cpu_to_le16(ioc->reply_post_queue_depth); + mpi_request.ReplyFreeQueueDepth = + cpu_to_le16(ioc->reply_free_queue_depth); + +#if BITS_PER_LONG > 32 + mpi_request.SenseBufferAddressHigh = + cpu_to_le32(ioc->sense_dma >> 32); + mpi_request.SystemReplyAddressHigh = + cpu_to_le32(ioc->reply_dma >> 32); + mpi_request.SystemRequestFrameBaseAddress = + cpu_to_le64(ioc->request_dma); + mpi_request.ReplyFreeQueueAddress = + cpu_to_le64(ioc->reply_free_dma); + mpi_request.ReplyDescriptorPostQueueAddress = + cpu_to_le64(ioc->reply_post_free_dma); +#else + mpi_request.SystemRequestFrameBaseAddress = + cpu_to_le32(ioc->request_dma); + mpi_request.ReplyFreeQueueAddress = + cpu_to_le32(ioc->reply_free_dma); + mpi_request.ReplyDescriptorPostQueueAddress = + cpu_to_le32(ioc->reply_post_free_dma); +#endif + + if (ioc->logging_level & MPT_DEBUG_INIT) { + u32 *mfp; + int i; + + mfp = (u32 *)&mpi_request; + printk(KERN_DEBUG "\toffset:data\n"); + for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++) + printk(KERN_DEBUG "\t[0x%02x]:%08x\n", i*4, + le32_to_cpu(mfp[i])); + } + + r = _base_handshake_req_reply_wait(ioc, + sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request, + sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10, + sleep_flag); + + if (r != 0) { + printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n", + ioc->name, __func__, r); + return r; + } + + if (mpi_reply.IOCStatus != MPI2_IOCSTATUS_SUCCESS || + mpi_reply.IOCLogInfo) { + printk(MPT2SAS_ERR_FMT "%s: failed\n", ioc->name, __func__); + r = -EIO; + } + + return 0; +} + +/** + * _base_send_port_enable - send port_enable(discovery stuff) to firmware + * @ioc: per adapter object + * @VF_ID: virtual function id + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_send_port_enable(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, int sleep_flag) +{ + Mpi2PortEnableRequest_t *mpi_request; + u32 ioc_state; + unsigned long timeleft; + int r = 0; + u16 smid; + + printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name); + + if (ioc->base_cmds.status & MPT2_CMD_PENDING) { + printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n", + ioc->name, __func__); + return -EAGAIN; + } + + smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + return -EAGAIN; + } + + ioc->base_cmds.status = MPT2_CMD_PENDING; + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->base_cmds.smid = smid; + memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t)); + mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE; + mpi_request->VF_ID = VF_ID; + + mpt2sas_base_put_smid_default(ioc, smid, VF_ID); + timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, + 300*HZ); + if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2PortEnableRequest_t)/4); + if (ioc->base_cmds.status & MPT2_CMD_RESET) + r = -EFAULT; + else + r = -ETIME; + goto out; + } else + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: complete\n", + ioc->name, __func__)); + + ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_OPERATIONAL, + 60, sleep_flag); + if (ioc_state) { + printk(MPT2SAS_ERR_FMT "%s: failed going to operational state " + " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state); + r = -EFAULT; + } + out: + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + printk(MPT2SAS_INFO_FMT "port enable: %s\n", + ioc->name, ((r == 0) ? "SUCCESS" : "FAILED")); + return r; +} + +/** + * _base_unmask_events - turn on notification for this event + * @ioc: per adapter object + * @event: firmware event + * + * The mask is stored in ioc->event_masks. + */ +static void +_base_unmask_events(struct MPT2SAS_ADAPTER *ioc, u16 event) +{ + u32 desired_event; + + if (event >= 128) + return; + + desired_event = (1 << (event % 32)); + + if (event < 32) + ioc->event_masks[0] &= ~desired_event; + else if (event < 64) + ioc->event_masks[1] &= ~desired_event; + else if (event < 96) + ioc->event_masks[2] &= ~desired_event; + else if (event < 128) + ioc->event_masks[3] &= ~desired_event; +} + +/** + * _base_event_notification - send event notification + * @ioc: per adapter object + * @VF_ID: virtual function id + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_event_notification(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, int sleep_flag) +{ + Mpi2EventNotificationRequest_t *mpi_request; + unsigned long timeleft; + u16 smid; + int r = 0; + int i; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + if (ioc->base_cmds.status & MPT2_CMD_PENDING) { + printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n", + ioc->name, __func__); + return -EAGAIN; + } + + smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + return -EAGAIN; + } + ioc->base_cmds.status = MPT2_CMD_PENDING; + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->base_cmds.smid = smid; + memset(mpi_request, 0, sizeof(Mpi2EventNotificationRequest_t)); + mpi_request->Function = MPI2_FUNCTION_EVENT_NOTIFICATION; + mpi_request->VF_ID = VF_ID; + for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) + mpi_request->EventMasks[i] = + le32_to_cpu(ioc->event_masks[i]); + mpt2sas_base_put_smid_default(ioc, smid, VF_ID); + timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ); + if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2EventNotificationRequest_t)/4); + if (ioc->base_cmds.status & MPT2_CMD_RESET) + r = -EFAULT; + else + r = -ETIME; + } else + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: complete\n", + ioc->name, __func__)); + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + return r; +} + +/** + * mpt2sas_base_validate_event_type - validating event types + * @ioc: per adapter object + * @event: firmware event + * + * This will turn on firmware event notification when application + * ask for that event. We don't mask events that are already enabled. + */ +void +mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_type) +{ + int i, j; + u32 event_mask, desired_event; + u8 send_update_to_fw; + + for (i = 0, send_update_to_fw = 0; i < + MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) { + event_mask = ~event_type[i]; + desired_event = 1; + for (j = 0; j < 32; j++) { + if (!(event_mask & desired_event) && + (ioc->event_masks[i] & desired_event)) { + ioc->event_masks[i] &= ~desired_event; + send_update_to_fw = 1; + } + desired_event = (desired_event << 1); + } + } + + if (!send_update_to_fw) + return; + + mutex_lock(&ioc->base_cmds.mutex); + _base_event_notification(ioc, 0, CAN_SLEEP); + mutex_unlock(&ioc->base_cmds.mutex); +} + +/** + * _base_diag_reset - the "big hammer" start of day reset + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) +{ + u32 host_diagnostic; + u32 ioc_state; + u32 count; + u32 hcb_size; + + printk(MPT2SAS_INFO_FMT "sending diag reset !!\n", ioc->name); + + _base_save_msix_table(ioc); + + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "clear interrupts\n", + ioc->name)); + writel(0, &ioc->chip->HostInterruptStatus); + + count = 0; + do { + /* Write magic sequence to WriteSequence register + * Loop until in diagnostic mode + */ + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "write magic " + "sequence\n", ioc->name)); + writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_1ST_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_2ND_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_3RD_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_4TH_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_5TH_KEY_VALUE, &ioc->chip->WriteSequence); + writel(MPI2_WRSEQ_6TH_KEY_VALUE, &ioc->chip->WriteSequence); + + /* wait 100 msec */ + if (sleep_flag == CAN_SLEEP) + msleep(100); + else + mdelay(100); + + if (count++ > 20) + goto out; + + host_diagnostic = readl(&ioc->chip->HostDiagnostic); + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "wrote magic " + "sequence: count(%d), host_diagnostic(0x%08x)\n", + ioc->name, count, host_diagnostic)); + + } while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0); + + hcb_size = readl(&ioc->chip->HCBSize); + + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "diag reset: issued\n", + ioc->name)); + writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER, + &ioc->chip->HostDiagnostic); + + /* don't access any registers for 50 milliseconds */ + msleep(50); + + /* 300 second max wait */ + for (count = 0; count < 3000000 ; count++) { + + host_diagnostic = readl(&ioc->chip->HostDiagnostic); + + if (host_diagnostic == 0xFFFFFFFF) + goto out; + if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER)) + break; + + /* wait 100 msec */ + if (sleep_flag == CAN_SLEEP) + msleep(1); + else + mdelay(1); + } + + if (host_diagnostic & MPI2_DIAG_HCB_MODE) { + + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "restart the adapter " + "assuming the HCB Address points to good F/W\n", + ioc->name)); + host_diagnostic &= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK; + host_diagnostic |= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW; + writel(host_diagnostic, &ioc->chip->HostDiagnostic); + + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "re-enable the HCDW\n", ioc->name)); + writel(hcb_size | MPI2_HCB_SIZE_HCB_ENABLE, + &ioc->chip->HCBSize); + } + + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "restart the adapter\n", + ioc->name)); + writel(host_diagnostic & ~MPI2_DIAG_HOLD_IOC_RESET, + &ioc->chip->HostDiagnostic); + + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "disable writes to the " + "diagnostic register\n", ioc->name)); + writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence); + + drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "Wait for FW to go to the " + "READY state\n", ioc->name)); + ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20, + sleep_flag); + if (ioc_state) { + printk(MPT2SAS_ERR_FMT "%s: failed going to ready state " + " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state); + goto out; + } + + _base_restore_msix_table(ioc); + printk(MPT2SAS_INFO_FMT "diag reset: SUCCESS\n", ioc->name); + return 0; + + out: + printk(MPT2SAS_ERR_FMT "diag reset: FAILED\n", ioc->name); + return -EFAULT; +} + +/** + * _base_make_ioc_ready - put controller in READY state + * @ioc: per adapter object + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * @type: FORCE_BIG_HAMMER or SOFT_RESET + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_make_ioc_ready(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, + enum reset_type type) +{ + u32 ioc_state; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + ioc_state = mpt2sas_base_get_iocstate(ioc, 0); + dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: ioc_state(0x%08x)\n", + ioc->name, __func__, ioc_state)); + + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY) + return 0; + + if (ioc_state & MPI2_DOORBELL_USED) { + dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "unexpected doorbell " + "active!\n", ioc->name)); + goto issue_diag_reset; + } + + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { + mpt2sas_base_fault_info(ioc, ioc_state & + MPI2_DOORBELL_DATA_MASK); + goto issue_diag_reset; + } + + if (type == FORCE_BIG_HAMMER) + goto issue_diag_reset; + + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL) + if (!(_base_send_ioc_reset(ioc, + MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15, CAN_SLEEP))) + return 0; + + issue_diag_reset: + return _base_diag_reset(ioc, CAN_SLEEP); +} + +/** + * _base_make_ioc_operational - put controller in OPERATIONAL state + * @ioc: per adapter object + * @VF_ID: virtual function id + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * Returns 0 for success, non-zero for failure. + */ +static int +_base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + int sleep_flag) +{ + int r, i; + unsigned long flags; + u32 reply_address; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + /* initialize the scsi lookup free list */ + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + INIT_LIST_HEAD(&ioc->free_list); + for (i = 0; i < ioc->request_depth; i++) { + ioc->scsi_lookup[i].cb_idx = 0xFF; + list_add_tail(&ioc->scsi_lookup[i].tracker_list, + &ioc->free_list); + } + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + + /* initialize Reply Free Queue */ + for (i = 0, reply_address = (u32)ioc->reply_dma ; + i < ioc->reply_free_queue_depth ; i++, reply_address += + ioc->reply_sz) + ioc->reply_free[i] = cpu_to_le32(reply_address); + + /* initialize Reply Post Free Queue */ + for (i = 0; i < ioc->reply_post_queue_depth; i++) + ioc->reply_post_free[i].Words = ~0ULL; + + r = _base_send_ioc_init(ioc, VF_ID, sleep_flag); + if (r) + return r; + + /* initialize the index's */ + ioc->reply_free_host_index = ioc->reply_free_queue_depth - 1; + ioc->reply_post_host_index = 0; + writel(ioc->reply_free_host_index, &ioc->chip->ReplyFreeHostIndex); + writel(0, &ioc->chip->ReplyPostHostIndex); + + _base_unmask_interrupts(ioc); + r = _base_event_notification(ioc, VF_ID, sleep_flag); + if (r) + return r; + + if (sleep_flag == CAN_SLEEP) + _base_static_config_pages(ioc); + + r = _base_send_port_enable(ioc, VF_ID, sleep_flag); + if (r) + return r; + + return r; +} + +/** + * mpt2sas_base_free_resources - free resources controller resources (io/irq/memap) + * @ioc: per adapter object + * + * Return nothing. + */ +void +mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER *ioc) +{ + struct pci_dev *pdev = ioc->pdev; + + dexitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + _base_mask_interrupts(ioc); + _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET); + if (ioc->pci_irq) { + synchronize_irq(pdev->irq); + free_irq(ioc->pci_irq, ioc); + } + _base_disable_msix(ioc); + if (ioc->chip_phys) + iounmap(ioc->chip); + ioc->pci_irq = -1; + ioc->chip_phys = 0; + pci_release_selected_regions(ioc->pdev, ioc->bars); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + return; +} + +/** + * mpt2sas_base_attach - attach controller instance + * @ioc: per adapter object + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc) +{ + int r, i; + unsigned long flags; + + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + r = mpt2sas_base_map_resources(ioc); + if (r) + return r; + + r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET); + if (r) + goto out_free_resources; + + r = _base_get_ioc_facts(ioc, CAN_SLEEP); + if (r) + goto out_free_resources; + + r = _base_allocate_memory_pools(ioc, CAN_SLEEP); + if (r) + goto out_free_resources; + + init_waitqueue_head(&ioc->reset_wq); + + /* base internal command bits */ + mutex_init(&ioc->base_cmds.mutex); + init_completion(&ioc->base_cmds.done); + ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + + /* transport internal command bits */ + ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->transport_cmds.status = MPT2_CMD_NOT_USED; + mutex_init(&ioc->transport_cmds.mutex); + init_completion(&ioc->transport_cmds.done); + + /* task management internal command bits */ + ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; + mutex_init(&ioc->tm_cmds.mutex); + init_completion(&ioc->tm_cmds.done); + + /* config page internal command bits */ + ioc->config_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->config_cmds.status = MPT2_CMD_NOT_USED; + mutex_init(&ioc->config_cmds.mutex); + init_completion(&ioc->config_cmds.done); + + /* ctl module internal command bits */ + ioc->ctl_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; + mutex_init(&ioc->ctl_cmds.mutex); + init_completion(&ioc->ctl_cmds.done); + + for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) + ioc->event_masks[i] = -1; + + /* here we enable the events we care about */ + _base_unmask_events(ioc, MPI2_EVENT_SAS_DISCOVERY); + _base_unmask_events(ioc, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE); + _base_unmask_events(ioc, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST); + _base_unmask_events(ioc, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE); + _base_unmask_events(ioc, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE); + _base_unmask_events(ioc, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST); + _base_unmask_events(ioc, MPI2_EVENT_IR_VOLUME); + _base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK); + _base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS); + _base_unmask_events(ioc, MPI2_EVENT_TASK_SET_FULL); + _base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED); + + ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts, + sizeof(Mpi2PortFactsReply_t), GFP_KERNEL); + if (!ioc->pfacts) + goto out_free_resources; + + for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) { + r = _base_get_port_facts(ioc, i, CAN_SLEEP); + if (r) + goto out_free_resources; + } + r = _base_make_ioc_operational(ioc, 0, CAN_SLEEP); + if (r) + goto out_free_resources; + + /* initialize fault polling */ + INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work); + snprintf(ioc->fault_reset_work_q_name, + sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id); + ioc->fault_reset_work_q = + create_singlethread_workqueue(ioc->fault_reset_work_q_name); + if (!ioc->fault_reset_work_q) { + printk(MPT2SAS_ERR_FMT "%s: failed (line=%d)\n", + ioc->name, __func__, __LINE__); + goto out_free_resources; + } + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->fault_reset_work_q) + queue_delayed_work(ioc->fault_reset_work_q, + &ioc->fault_reset_work, + msecs_to_jiffies(FAULT_POLLING_INTERVAL)); + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + return 0; + + out_free_resources: + + ioc->remove_host = 1; + mpt2sas_base_free_resources(ioc); + _base_release_memory_pools(ioc); + kfree(ioc->tm_cmds.reply); + kfree(ioc->transport_cmds.reply); + kfree(ioc->config_cmds.reply); + kfree(ioc->base_cmds.reply); + kfree(ioc->ctl_cmds.reply); + kfree(ioc->pfacts); + ioc->ctl_cmds.reply = NULL; + ioc->base_cmds.reply = NULL; + ioc->tm_cmds.reply = NULL; + ioc->transport_cmds.reply = NULL; + ioc->config_cmds.reply = NULL; + ioc->pfacts = NULL; + return r; +} + + +/** + * mpt2sas_base_detach - remove controller instance + * @ioc: per adapter object + * + * Return nothing. + */ +void +mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc) +{ + unsigned long flags; + struct workqueue_struct *wq; + + dexitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + wq = ioc->fault_reset_work_q; + ioc->fault_reset_work_q = NULL; + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + if (!cancel_delayed_work(&ioc->fault_reset_work)) + flush_workqueue(wq); + destroy_workqueue(wq); + + mpt2sas_base_free_resources(ioc); + _base_release_memory_pools(ioc); + kfree(ioc->pfacts); + kfree(ioc->ctl_cmds.reply); + kfree(ioc->base_cmds.reply); + kfree(ioc->tm_cmds.reply); + kfree(ioc->transport_cmds.reply); + kfree(ioc->config_cmds.reply); +} + +/** + * _base_reset_handler - reset callback handler (for base) + * @ioc: per adapter object + * @reset_phase: phase + * + * The handler for doing any required cleanup or initialization. + * + * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET, + * MPT2_IOC_DONE_RESET + * + * Return nothing. + */ +static void +_base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) +{ + switch (reset_phase) { + case MPT2_IOC_PRE_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_PRE_RESET\n", ioc->name, __func__)); + break; + case MPT2_IOC_AFTER_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__)); + if (ioc->transport_cmds.status & MPT2_CMD_PENDING) { + ioc->transport_cmds.status |= MPT2_CMD_RESET; + mpt2sas_base_free_smid(ioc, ioc->transport_cmds.smid); + complete(&ioc->transport_cmds.done); + } + if (ioc->base_cmds.status & MPT2_CMD_PENDING) { + ioc->base_cmds.status |= MPT2_CMD_RESET; + mpt2sas_base_free_smid(ioc, ioc->base_cmds.smid); + complete(&ioc->base_cmds.done); + } + if (ioc->config_cmds.status & MPT2_CMD_PENDING) { + ioc->config_cmds.status |= MPT2_CMD_RESET; + mpt2sas_base_free_smid(ioc, ioc->config_cmds.smid); + complete(&ioc->config_cmds.done); + } + break; + case MPT2_IOC_DONE_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_DONE_RESET\n", ioc->name, __func__)); + break; + } + mpt2sas_scsih_reset_handler(ioc, reset_phase); + mpt2sas_ctl_reset_handler(ioc, reset_phase); +} + +/** + * _wait_for_commands_to_complete - reset controller + * @ioc: Pointer to MPT_ADAPTER structure + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * + * This function waiting(3s) for all pending commands to complete + * prior to putting controller in reset. + */ +static void +_wait_for_commands_to_complete(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) +{ + u32 ioc_state; + unsigned long flags; + u16 i; + + ioc->pending_io_count = 0; + if (sleep_flag != CAN_SLEEP) + return; + + ioc_state = mpt2sas_base_get_iocstate(ioc, 0); + if ((ioc_state & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) + return; + + /* pending command count */ + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + for (i = 0; i < ioc->request_depth; i++) + if (ioc->scsi_lookup[i].cb_idx != 0xFF) + ioc->pending_io_count++; + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + + if (!ioc->pending_io_count) + return; + + /* wait for pending commands to complete */ + wait_event_timeout(ioc->reset_wq, ioc->pending_io_count == 0, 3 * HZ); +} + +/** + * mpt2sas_base_hard_reset_handler - reset controller + * @ioc: Pointer to MPT_ADAPTER structure + * @sleep_flag: CAN_SLEEP or NO_SLEEP + * @type: FORCE_BIG_HAMMER or SOFT_RESET + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, + enum reset_type type) +{ + int r, i; + unsigned long flags; + + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name, + __func__)); + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->ioc_reset_in_progress) { + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + printk(MPT2SAS_ERR_FMT "%s: busy\n", + ioc->name, __func__); + return -EBUSY; + } + ioc->ioc_reset_in_progress = 1; + ioc->shost_recovery = 1; + if (ioc->shost->shost_state == SHOST_RUNNING) { + /* set back to SHOST_RUNNING in mpt2sas_scsih.c */ + scsi_host_set_state(ioc->shost, SHOST_RECOVERY); + printk(MPT2SAS_INFO_FMT "putting controller into " + "SHOST_RECOVERY\n", ioc->name); + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + _base_reset_handler(ioc, MPT2_IOC_PRE_RESET); + _wait_for_commands_to_complete(ioc, sleep_flag); + _base_mask_interrupts(ioc); + r = _base_make_ioc_ready(ioc, sleep_flag, type); + if (r) + goto out; + _base_reset_handler(ioc, MPT2_IOC_AFTER_RESET); + for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) + r = _base_make_ioc_operational(ioc, ioc->pfacts[i].VF_ID, + sleep_flag); + if (!r) + _base_reset_handler(ioc, MPT2_IOC_DONE_RESET); + out: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: %s\n", + ioc->name, __func__, ((r == 0) ? "SUCCESS" : "FAILED"))); + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + ioc->ioc_reset_in_progress = 0; + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + return r; +} diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h new file mode 100644 index 00000000000..6945ff4d382 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -0,0 +1,779 @@ +/* + * This is the Fusion MPT base driver providing common API layer interface + * for access to MPT (Message Passing Technology) firmware. + * + * This code is based on drivers/scsi/mpt2sas/mpt2_base.h + * Copyright (C) 2007-2008 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#ifndef MPT2SAS_BASE_H_INCLUDED +#define MPT2SAS_BASE_H_INCLUDED + +#include "mpi/mpi2_type.h" +#include "mpi/mpi2.h" +#include "mpi/mpi2_ioc.h" +#include "mpi/mpi2_cnfg.h" +#include "mpi/mpi2_init.h" +#include "mpi/mpi2_raid.h" +#include "mpi/mpi2_tool.h" +#include "mpi/mpi2_sas.h" + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_tcq.h> +#include <scsi/scsi_transport_sas.h> +#include <scsi/scsi_dbg.h> + +#include "mpt2sas_debug.h" + +/* driver versioning info */ +#define MPT2SAS_DRIVER_NAME "mpt2sas" +#define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>" +#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" +#define MPT2SAS_DRIVER_VERSION "00.100.11.16" +#define MPT2SAS_MAJOR_VERSION 00 +#define MPT2SAS_MINOR_VERSION 100 +#define MPT2SAS_BUILD_VERSION 11 +#define MPT2SAS_RELEASE_VERSION 16 + +/* + * Set MPT2SAS_SG_DEPTH value based on user input. + */ +#ifdef CONFIG_SCSI_MPT2SAS_MAX_SGE +#if CONFIG_SCSI_MPT2SAS_MAX_SGE < 16 +#define MPT2SAS_SG_DEPTH 16 +#elif CONFIG_SCSI_MPT2SAS_MAX_SGE > 128 +#define MPT2SAS_SG_DEPTH 128 +#else +#define MPT2SAS_SG_DEPTH CONFIG_SCSI_MPT2SAS_MAX_SGE +#endif +#else +#define MPT2SAS_SG_DEPTH 128 /* MAX_HW_SEGMENTS */ +#endif + + +/* + * Generic Defines + */ +#define MPT2SAS_SATA_QUEUE_DEPTH 32 +#define MPT2SAS_SAS_QUEUE_DEPTH 254 +#define MPT2SAS_RAID_QUEUE_DEPTH 128 + +#define MPT_NAME_LENGTH 32 /* generic length of strings */ +#define MPT_STRING_LENGTH 64 + +#define MPT_MAX_CALLBACKS 16 + +#define CAN_SLEEP 1 +#define NO_SLEEP 0 + +#define INTERNAL_CMDS_COUNT 10 /* reserved cmds */ + +#define MPI2_HIM_MASK 0xFFFFFFFF /* mask every bit*/ + +#define MPT2SAS_INVALID_DEVICE_HANDLE 0xFFFF + + +/* + * reset phases + */ +#define MPT2_IOC_PRE_RESET 1 /* prior to host reset */ +#define MPT2_IOC_AFTER_RESET 2 /* just after host reset */ +#define MPT2_IOC_DONE_RESET 3 /* links re-initialized */ + +/* + * logging format + */ +#define MPT2SAS_FMT "%s: " +#define MPT2SAS_DEBUG_FMT KERN_DEBUG MPT2SAS_FMT +#define MPT2SAS_INFO_FMT KERN_INFO MPT2SAS_FMT +#define MPT2SAS_NOTE_FMT KERN_NOTICE MPT2SAS_FMT +#define MPT2SAS_WARN_FMT KERN_WARNING MPT2SAS_FMT +#define MPT2SAS_ERR_FMT KERN_ERR MPT2SAS_FMT + +/* + * per target private data + */ +#define MPT_TARGET_FLAGS_RAID_COMPONENT 0x01 +#define MPT_TARGET_FLAGS_VOLUME 0x02 +#define MPT_TARGET_FLAGS_DELETED 0x04 + +/** + * struct MPT2SAS_TARGET - starget private hostdata + * @starget: starget object + * @sas_address: target sas address + * @handle: device handle + * @num_luns: number luns + * @flags: MPT_TARGET_FLAGS_XXX flags + * @deleted: target flaged for deletion + * @tm_busy: target is busy with TM request. + */ +struct MPT2SAS_TARGET { + struct scsi_target *starget; + u64 sas_address; + u16 handle; + int num_luns; + u32 flags; + u8 deleted; + u8 tm_busy; +}; + +/* + * per device private data + */ +#define MPT_DEVICE_FLAGS_INIT 0x01 +#define MPT_DEVICE_TLR_ON 0x02 + +/** + * struct MPT2SAS_DEVICE - sdev private hostdata + * @sas_target: starget private hostdata + * @lun: lun number + * @flags: MPT_DEVICE_XXX flags + * @configured_lun: lun is configured + * @block: device is in SDEV_BLOCK state + * @tlr_snoop_check: flag used in determining whether to disable TLR + */ +struct MPT2SAS_DEVICE { + struct MPT2SAS_TARGET *sas_target; + unsigned int lun; + u32 flags; + u8 configured_lun; + u8 block; + u8 tlr_snoop_check; +}; + +#define MPT2_CMD_NOT_USED 0x8000 /* free */ +#define MPT2_CMD_COMPLETE 0x0001 /* completed */ +#define MPT2_CMD_PENDING 0x0002 /* pending */ +#define MPT2_CMD_REPLY_VALID 0x0004 /* reply is valid */ +#define MPT2_CMD_RESET 0x0008 /* host reset dropped the command */ + +/** + * struct _internal_cmd - internal commands struct + * @mutex: mutex + * @done: completion + * @reply: reply message pointer + * @status: MPT2_CMD_XXX status + * @smid: system message id + */ +struct _internal_cmd { + struct mutex mutex; + struct completion done; + void *reply; + u16 status; + u16 smid; +}; + +/* + * SAS Topology Structures + */ + +/** + * struct _sas_device - attached device information + * @list: sas device list + * @starget: starget object + * @sas_address: device sas address + * @device_name: retrieved from the SAS IDENTIFY frame. + * @handle: device handle + * @parent_handle: handle to parent device + * @enclosure_handle: enclosure handle + * @enclosure_logical_id: enclosure logical identifier + * @volume_handle: volume handle (valid when hidden raid member) + * @volume_wwid: volume unique identifier + * @device_info: bitfield provides detailed info about the device + * @id: target id + * @channel: target channel + * @slot: number number + * @hidden_raid_component: set to 1 when this is a raid member + * @responding: used in _scsih_sas_device_mark_responding + */ +struct _sas_device { + struct list_head list; + struct scsi_target *starget; + u64 sas_address; + u64 device_name; + u16 handle; + u16 parent_handle; + u16 enclosure_handle; + u64 enclosure_logical_id; + u16 volume_handle; + u64 volume_wwid; + u32 device_info; + int id; + int channel; + u16 slot; + u8 hidden_raid_component; + u8 responding; +}; + +/** + * struct _raid_device - raid volume link list + * @list: sas device list + * @starget: starget object + * @sdev: scsi device struct (volumes are single lun) + * @wwid: unique identifier for the volume + * @handle: device handle + * @id: target id + * @channel: target channel + * @volume_type: the raid level + * @device_info: bitfield provides detailed info about the hidden components + * @num_pds: number of hidden raid components + * @responding: used in _scsih_raid_device_mark_responding + */ +struct _raid_device { + struct list_head list; + struct scsi_target *starget; + struct scsi_device *sdev; + u64 wwid; + u16 handle; + int id; + int channel; + u8 volume_type; + u32 device_info; + u8 num_pds; + u8 responding; +}; + +/** + * struct _boot_device - boot device info + * @is_raid: flag to indicate whether this is volume + * @device: holds pointer for either struct _sas_device or + * struct _raid_device + */ +struct _boot_device { + u8 is_raid; + void *device; +}; + +/** + * struct _sas_port - wide/narrow sas port information + * @port_list: list of ports belonging to expander + * @handle: device handle for this port + * @sas_address: sas address of this port + * @num_phys: number of phys belonging to this port + * @remote_identify: attached device identification + * @rphy: sas transport rphy object + * @port: sas transport wide/narrow port object + * @phy_list: _sas_phy list objects belonging to this port + */ +struct _sas_port { + struct list_head port_list; + u16 handle; + u64 sas_address; + u8 num_phys; + struct sas_identify remote_identify; + struct sas_rphy *rphy; + struct sas_port *port; + struct list_head phy_list; +}; + +/** + * struct _sas_phy - phy information + * @port_siblings: list of phys belonging to a port + * @identify: phy identification + * @remote_identify: attached device identification + * @phy: sas transport phy object + * @phy_id: unique phy id + * @handle: device handle for this phy + * @attached_handle: device handle for attached device + */ +struct _sas_phy { + struct list_head port_siblings; + struct sas_identify identify; + struct sas_identify remote_identify; + struct sas_phy *phy; + u8 phy_id; + u16 handle; + u16 attached_handle; +}; + +/** + * struct _sas_node - sas_host/expander information + * @list: list of expanders + * @parent_dev: parent device class + * @num_phys: number phys belonging to this sas_host/expander + * @sas_address: sas address of this sas_host/expander + * @handle: handle for this sas_host/expander + * @parent_handle: parent handle + * @enclosure_handle: handle for this a member of an enclosure + * @device_info: bitwise defining capabilities of this sas_host/expander + * @responding: used in _scsih_expander_device_mark_responding + * @phy: a list of phys that make up this sas_host/expander + * @sas_port_list: list of ports attached to this sas_host/expander + */ +struct _sas_node { + struct list_head list; + struct device *parent_dev; + u8 num_phys; + u64 sas_address; + u16 handle; + u16 parent_handle; + u16 enclosure_handle; + u64 enclosure_logical_id; + u8 responding; + struct _sas_phy *phy; + struct list_head sas_port_list; +}; + +/** + * enum reset_type - reset state + * @FORCE_BIG_HAMMER: issue diagnostic reset + * @SOFT_RESET: issue message_unit_reset, if fails to to big hammer + */ +enum reset_type { + FORCE_BIG_HAMMER, + SOFT_RESET, +}; + +/** + * struct request_tracker - firmware request tracker + * @smid: system message id + * @scmd: scsi request pointer + * @cb_idx: callback index + * @chain_list: list of chains associated to this IO + * @tracker_list: list of free request (ioc->free_list) + */ +struct request_tracker { + u16 smid; + struct scsi_cmnd *scmd; + u8 cb_idx; + struct list_head tracker_list; +}; + +typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr); + +/** + * struct MPT2SAS_ADAPTER - per adapter struct + * @list: ioc_list + * @shost: shost object + * @id: unique adapter id + * @pci_irq: irq number + * @name: generic ioc string + * @tmp_string: tmp string used for logging + * @pdev: pci pdev object + * @chip: memory mapped register space + * @chip_phys: physical addrss prior to mapping + * @pio_chip: I/O mapped register space + * @logging_level: see mpt2sas_debug.h + * @ir_firmware: IR firmware present + * @bars: bitmask of BAR's that must be configured + * @mask_interrupts: ignore interrupt + * @fault_reset_work_q_name: fw fault work queue + * @fault_reset_work_q: "" + * @fault_reset_work: "" + * @firmware_event_name: fw event work queue + * @firmware_event_thread: "" + * @fw_events_off: flag to turn off fw event handling + * @fw_event_lock: + * @fw_event_list: list of fw events + * @aen_event_read_flag: event log was read + * @broadcast_aen_busy: broadcast aen waiting to be serviced + * @ioc_reset_in_progress: host reset in progress + * @ioc_reset_in_progress_lock: + * @ioc_link_reset_in_progress: phy/hard reset in progress + * @ignore_loginfos: ignore loginfos during task managment + * @remove_host: flag for when driver unloads, to avoid sending dev resets + * @wait_for_port_enable_to_complete: + * @msix_enable: flag indicating msix is enabled + * @msix_vector_count: number msix vectors + * @msix_table: virt address to the msix table + * @msix_table_backup: backup msix table + * @scsi_io_cb_idx: shost generated commands + * @tm_cb_idx: task management commands + * @transport_cb_idx: transport internal commands + * @ctl_cb_idx: clt internal commands + * @base_cb_idx: base internal commands + * @config_cb_idx: base internal commands + * @base_cmds: + * @transport_cmds: + * @tm_cmds: + * @ctl_cmds: + * @config_cmds: + * @base_add_sg_single: handler for either 32/64 bit sgl's + * @event_type: bits indicating which events to log + * @event_context: unique id for each logged event + * @event_log: event log pointer + * @event_masks: events that are masked + * @facts: static facts data + * @pfacts: static port facts data + * @manu_pg0: static manufacturing page 0 + * @bios_pg2: static bios page 2 + * @bios_pg3: static bios page 3 + * @ioc_pg8: static ioc page 8 + * @iounit_pg0: static iounit page 0 + * @iounit_pg1: static iounit page 1 + * @sas_hba: sas host object + * @sas_expander_list: expander object list + * @sas_node_lock: + * @sas_device_list: sas device object list + * @sas_device_init_list: sas device object list (used only at init time) + * @sas_device_lock: + * @io_missing_delay: time for IO completed by fw when PDR enabled + * @device_missing_delay: time for device missing by fw when PDR enabled + * @config_page_sz: config page size + * @config_page: reserve memory for config page payload + * @config_page_dma: + * @sge_size: sg element size for either 32/64 bit + * @request_depth: hba request queue depth + * @request_sz: per request frame size + * @request: pool of request frames + * @request_dma: + * @request_dma_sz: + * @scsi_lookup: firmware request tracker list + * @scsi_lookup_lock: + * @free_list: free list of request + * @chain: pool of chains + * @pending_io_count: + * @reset_wq: + * @chain_dma: + * @max_sges_in_main_message: number sg elements in main message + * @max_sges_in_chain_message: number sg elements per chain + * @chains_needed_per_io: max chains per io + * @chain_offset_value_for_main_message: location 1st sg in main + * @chain_depth: total chains allocated + * @sense: pool of sense + * @sense_dma: + * @sense_dma_pool: + * @reply_depth: hba reply queue depth: + * @reply_sz: per reply frame size: + * @reply: pool of replys: + * @reply_dma: + * @reply_dma_pool: + * @reply_free_queue_depth: reply free depth + * @reply_free: pool for reply free queue (32 bit addr) + * @reply_free_dma: + * @reply_free_dma_pool: + * @reply_free_host_index: tail index in pool to insert free replys + * @reply_post_queue_depth: reply post queue depth + * @reply_post_free: pool for reply post (64bit descriptor) + * @reply_post_free_dma: + * @reply_post_free_dma_pool: + * @reply_post_host_index: head index in the pool where FW completes IO + */ +struct MPT2SAS_ADAPTER { + struct list_head list; + struct Scsi_Host *shost; + u8 id; + u32 pci_irq; + char name[MPT_NAME_LENGTH]; + char tmp_string[MPT_STRING_LENGTH]; + struct pci_dev *pdev; + Mpi2SystemInterfaceRegs_t __iomem *chip; + unsigned long chip_phys; + unsigned long pio_chip; + int logging_level; + u8 ir_firmware; + int bars; + u8 mask_interrupts; + + /* fw fault handler */ + char fault_reset_work_q_name[20]; + struct workqueue_struct *fault_reset_work_q; + struct delayed_work fault_reset_work; + + /* fw event handler */ + char firmware_event_name[20]; + struct workqueue_struct *firmware_event_thread; + u8 fw_events_off; + spinlock_t fw_event_lock; + struct list_head fw_event_list; + + /* misc flags */ + int aen_event_read_flag; + u8 broadcast_aen_busy; + u8 ioc_reset_in_progress; + u8 shost_recovery; + spinlock_t ioc_reset_in_progress_lock; + u8 ioc_link_reset_in_progress; + u8 ignore_loginfos; + u8 remove_host; + u8 wait_for_port_enable_to_complete; + + u8 msix_enable; + u16 msix_vector_count; + u32 *msix_table; + u32 *msix_table_backup; + + /* internal commands, callback index */ + u8 scsi_io_cb_idx; + u8 tm_cb_idx; + u8 transport_cb_idx; + u8 ctl_cb_idx; + u8 base_cb_idx; + u8 config_cb_idx; + struct _internal_cmd base_cmds; + struct _internal_cmd transport_cmds; + struct _internal_cmd tm_cmds; + struct _internal_cmd ctl_cmds; + struct _internal_cmd config_cmds; + + MPT_ADD_SGE base_add_sg_single; + + /* event log */ + u32 event_type[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; + u32 event_context; + void *event_log; + u32 event_masks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; + + /* static config pages */ + Mpi2IOCFactsReply_t facts; + Mpi2PortFactsReply_t *pfacts; + Mpi2ManufacturingPage0_t manu_pg0; + Mpi2BiosPage2_t bios_pg2; + Mpi2BiosPage3_t bios_pg3; + Mpi2IOCPage8_t ioc_pg8; + Mpi2IOUnitPage0_t iounit_pg0; + Mpi2IOUnitPage1_t iounit_pg1; + + struct _boot_device req_boot_device; + struct _boot_device req_alt_boot_device; + struct _boot_device current_boot_device; + + /* sas hba, expander, and device list */ + struct _sas_node sas_hba; + struct list_head sas_expander_list; + spinlock_t sas_node_lock; + struct list_head sas_device_list; + struct list_head sas_device_init_list; + spinlock_t sas_device_lock; + struct list_head raid_device_list; + spinlock_t raid_device_lock; + u8 io_missing_delay; + u16 device_missing_delay; + int sas_id; + + /* config page */ + u16 config_page_sz; + void *config_page; + dma_addr_t config_page_dma; + + /* request */ + u16 sge_size; + u16 request_depth; + u16 request_sz; + u8 *request; + dma_addr_t request_dma; + u32 request_dma_sz; + struct request_tracker *scsi_lookup; + spinlock_t scsi_lookup_lock; + struct list_head free_list; + int pending_io_count; + wait_queue_head_t reset_wq; + + /* chain */ + u8 *chain; + dma_addr_t chain_dma; + u16 max_sges_in_main_message; + u16 max_sges_in_chain_message; + u16 chains_needed_per_io; + u16 chain_offset_value_for_main_message; + u16 chain_depth; + + /* sense */ + u8 *sense; + dma_addr_t sense_dma; + struct dma_pool *sense_dma_pool; + + /* reply */ + u16 reply_sz; + u8 *reply; + dma_addr_t reply_dma; + struct dma_pool *reply_dma_pool; + + /* reply free queue */ + u16 reply_free_queue_depth; + u32 *reply_free; + dma_addr_t reply_free_dma; + struct dma_pool *reply_free_dma_pool; + u32 reply_free_host_index; + + /* reply post queue */ + u16 reply_post_queue_depth; + Mpi2ReplyDescriptorsUnion_t *reply_post_free; + dma_addr_t reply_post_free_dma; + struct dma_pool *reply_post_free_dma_pool; + u32 reply_post_host_index; + + /* diag buffer support */ + u8 *diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT]; + u32 diag_buffer_sz[MPI2_DIAG_BUF_TYPE_COUNT]; + dma_addr_t diag_buffer_dma[MPI2_DIAG_BUF_TYPE_COUNT]; + u8 diag_buffer_status[MPI2_DIAG_BUF_TYPE_COUNT]; + u32 unique_id[MPI2_DIAG_BUF_TYPE_COUNT]; + u32 product_specific[MPI2_DIAG_BUF_TYPE_COUNT][23]; + u32 diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT]; +}; + +typedef void (*MPT_CALLBACK)(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, + u32 reply); + + +/* base shared API */ +extern struct list_head mpt2sas_ioc_list; + +int mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc); +void mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc); +int mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc); +void mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER *ioc); +int mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, + enum reset_type type); + +void *mpt2sas_base_get_msg_frame(struct MPT2SAS_ADAPTER *ioc, u16 smid); +void *mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid); +void mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER *ioc, void *paddr); +dma_addr_t mpt2sas_base_get_msg_frame_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid); +dma_addr_t mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid); + +u16 mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx); +void mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid); +void mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id, + u16 handle); +void mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id); +void mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid, + u8 vf_id, u16 io_index); +void mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id); +void mpt2sas_base_initialize_callback_handler(void); +u8 mpt2sas_base_register_callback_handler(MPT_CALLBACK cb_func); +void mpt2sas_base_release_callback_handler(u8 cb_idx); + +void mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply); +void *mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr); + +u32 mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked); + +void mpt2sas_base_fault_info(struct MPT2SAS_ADAPTER *ioc , u16 fault_code); +int mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc, + Mpi2SasIoUnitControlReply_t *mpi_reply, Mpi2SasIoUnitControlRequest_t + *mpi_request); +int mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc, + Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request); +void mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_type); + +/* scsih shared API */ +void mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun, + u8 type, u16 smid_task, ulong timeout); +void mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle); +void mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle); +struct _sas_node *mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc, + u16 handle); +struct _sas_node *mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAPTER + *ioc, u64 sas_address); +struct _sas_device *mpt2sas_scsih_sas_device_find_by_sas_address( + struct MPT2SAS_ADAPTER *ioc, u64 sas_address); + +void mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply); +void mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase); + +/* config shared API */ +void mpt2sas_config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply); +int mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER *ioc, u8 *num_phys); +int mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page); +int mpt2sas_config_get_bios_pg2(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2BiosPage2_t *config_page); +int mpt2sas_config_get_bios_pg3(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2BiosPage3_t *config_page); +int mpt2sas_config_get_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2IOUnitPage0_t *config_page); +int mpt2sas_config_get_sas_device_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasDevicePage0_t *config_page, u32 form, u32 handle); +int mpt2sas_config_get_sas_device_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasDevicePage1_t *config_page, u32 form, u32 handle); +int mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasIOUnitPage0_t *config_page, u16 sz); +int mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2IOUnitPage1_t *config_page); +int mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2IOUnitPage1_t config_page); +int mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz); +int mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2IOCPage8_t *config_page); +int mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2ExpanderPage0_t *config_page, u32 form, u32 handle); +int mpt2sas_config_get_expander_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2ExpanderPage1_t *config_page, u32 phy_number, u16 handle); +int mpt2sas_config_get_enclosure_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasEnclosurePage0_t *config_page, u32 form, u32 handle); +int mpt2sas_config_get_phy_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number); +int mpt2sas_config_get_phy_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number); +int mpt2sas_config_get_raid_volume_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form, u32 handle); +int mpt2sas_config_get_number_pds(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 *num_pds); +int mpt2sas_config_get_raid_volume_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form, u32 handle, u16 sz); +int mpt2sas_config_get_phys_disk_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 form, + u32 form_specific); +int mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle, + u16 *volume_handle); +int mpt2sas_config_get_volume_wwid(struct MPT2SAS_ADAPTER *ioc, u16 volume_handle, + u64 *wwid); + +/* ctl shared API */ +extern struct device_attribute *mpt2sas_host_attrs[]; +extern struct device_attribute *mpt2sas_dev_attrs[]; +void mpt2sas_ctl_init(void); +void mpt2sas_ctl_exit(void); +void mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply); +void mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase); +void mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply); +void mpt2sas_ctl_add_to_event_log(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventNotificationReply_t *mpi_reply); + +/* transport shared API */ +void mpt2sas_transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply); +struct _sas_port *mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER *ioc, + u16 handle, u16 parent_handle); +void mpt2sas_transport_port_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, + u16 parent_handle); +int mpt2sas_transport_add_host_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy + *mpt2sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev); +int mpt2sas_transport_add_expander_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy + *mpt2sas_phy, Mpi2ExpanderPage1_t expander_pg1, struct device *parent_dev); +void mpt2sas_transport_update_phy_link_change(struct MPT2SAS_ADAPTER *ioc, u16 handle, + u16 attached_handle, u8 phy_number, u8 link_rate); +extern struct sas_function_template mpt2sas_transport_functions; +extern struct scsi_transport_template *mpt2sas_transport_template; + +#endif /* MPT2SAS_BASE_H_INCLUDED */ diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c new file mode 100644 index 00000000000..58cfb97846f --- /dev/null +++ b/drivers/scsi/mpt2sas/mpt2sas_config.c @@ -0,0 +1,1873 @@ +/* + * This module provides common API for accessing firmware configuration pages + * + * This code is based on drivers/scsi/mpt2sas/mpt2_base.c + * Copyright (C) 2007-2008 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/blkdev.h> +#include <linux/sched.h> +#include <linux/workqueue.h> +#include <linux/delay.h> +#include <linux/pci.h> + +#include "mpt2sas_base.h" + +/* local definitions */ + +/* Timeout for config page request (in seconds) */ +#define MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT 15 + +/* Common sgl flags for READING a config page. */ +#define MPT2_CONFIG_COMMON_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \ + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \ + | MPI2_SGE_FLAGS_END_OF_LIST) << MPI2_SGE_FLAGS_SHIFT) + +/* Common sgl flags for WRITING a config page. */ +#define MPT2_CONFIG_COMMON_WRITE_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \ + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \ + | MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC) \ + << MPI2_SGE_FLAGS_SHIFT) + +/** + * struct config_request - obtain dma memory via routine + * @config_page_sz: size + * @config_page: virt pointer + * @config_page_dma: phys pointer + * + */ +struct config_request{ + u16 config_page_sz; + void *config_page; + dma_addr_t config_page_dma; +}; + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _config_display_some_debug - debug routine + * @ioc: per adapter object + * @smid: system request message index + * @calling_function_name: string pass from calling function + * @mpi_reply: reply message frame + * Context: none. + * + * Function for displaying debug info helpfull when debugging issues + * in this module. + */ +static void +_config_display_some_debug(struct MPT2SAS_ADAPTER *ioc, u16 smid, + char *calling_function_name, MPI2DefaultReply_t *mpi_reply) +{ + Mpi2ConfigRequest_t *mpi_request; + char *desc = NULL; + + if (!(ioc->logging_level & MPT_DEBUG_CONFIG)) + return; + + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + switch (mpi_request->Header.PageType & MPI2_CONFIG_PAGETYPE_MASK) { + case MPI2_CONFIG_PAGETYPE_IO_UNIT: + desc = "io_unit"; + break; + case MPI2_CONFIG_PAGETYPE_IOC: + desc = "ioc"; + break; + case MPI2_CONFIG_PAGETYPE_BIOS: + desc = "bios"; + break; + case MPI2_CONFIG_PAGETYPE_RAID_VOLUME: + desc = "raid_volume"; + break; + case MPI2_CONFIG_PAGETYPE_MANUFACTURING: + desc = "manufaucturing"; + break; + case MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK: + desc = "physdisk"; + break; + case MPI2_CONFIG_PAGETYPE_EXTENDED: + switch (mpi_request->ExtPageType) { + case MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT: + desc = "sas_io_unit"; + break; + case MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER: + desc = "sas_expander"; + break; + case MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE: + desc = "sas_device"; + break; + case MPI2_CONFIG_EXTPAGETYPE_SAS_PHY: + desc = "sas_phy"; + break; + case MPI2_CONFIG_EXTPAGETYPE_LOG: + desc = "log"; + break; + case MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE: + desc = "enclosure"; + break; + case MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG: + desc = "raid_config"; + break; + case MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING: + desc = "driver_mappping"; + break; + } + break; + } + + if (!desc) + return; + + printk(MPT2SAS_DEBUG_FMT "%s: %s(%d), action(%d), form(0x%08x), " + "smid(%d)\n", ioc->name, calling_function_name, desc, + mpi_request->Header.PageNumber, mpi_request->Action, + le32_to_cpu(mpi_request->PageAddress), smid); + + if (!mpi_reply) + return; + + if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo) + printk(MPT2SAS_DEBUG_FMT + "\tiocstatus(0x%04x), loginfo(0x%08x)\n", + ioc->name, le16_to_cpu(mpi_reply->IOCStatus), + le32_to_cpu(mpi_reply->IOCLogInfo)); +} +#endif + +/** + * mpt2sas_config_done - config page completion routine + * @ioc: per adapter object + * @smid: system request message index + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * Context: none. + * + * The callback handler when using _config_request. + * + * Return nothing. + */ +void +mpt2sas_config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + + if (ioc->config_cmds.status == MPT2_CMD_NOT_USED) + return; + if (ioc->config_cmds.smid != smid) + return; + ioc->config_cmds.status |= MPT2_CMD_COMPLETE; + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + if (mpi_reply) { + ioc->config_cmds.status |= MPT2_CMD_REPLY_VALID; + memcpy(ioc->config_cmds.reply, mpi_reply, + mpi_reply->MsgLength*4); + } + ioc->config_cmds.status &= ~MPT2_CMD_PENDING; +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + _config_display_some_debug(ioc, smid, "config_done", mpi_reply); +#endif + complete(&ioc->config_cmds.done); +} + +/** + * _config_request - main routine for sending config page requests + * @ioc: per adapter object + * @mpi_request: request message frame + * @mpi_reply: reply mf payload returned from firmware + * @timeout: timeout in seconds + * Context: sleep, the calling function needs to acquire the config_cmds.mutex + * + * A generic API for config page requests to firmware. + * + * The ioc->config_cmds.status flag should be MPT2_CMD_NOT_USED before calling + * this API. + * + * The callback index is set inside `ioc->config_cb_idx. + * + * Returns 0 for success, non-zero for failure. + */ +static int +_config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t + *mpi_request, Mpi2ConfigReply_t *mpi_reply, int timeout) +{ + u16 smid; + u32 ioc_state; + unsigned long timeleft; + Mpi2ConfigRequest_t *config_request; + int r; + u8 retry_count; + u8 issue_reset; + u16 wait_state_count; + + if (ioc->config_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_ERR_FMT "%s: config_cmd in use\n", + ioc->name, __func__); + return -EAGAIN; + } + retry_count = 0; + + retry_config: + wait_state_count = 0; + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT) { + printk(MPT2SAS_ERR_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + ioc->config_cmds.status = MPT2_CMD_NOT_USED; + return -EFAULT; + } + ssleep(1); + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + printk(MPT2SAS_INFO_FMT "%s: waiting for " + "operational state(count=%d)\n", ioc->name, + __func__, wait_state_count); + } + if (wait_state_count) + printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n", + ioc->name, __func__); + + smid = mpt2sas_base_get_smid(ioc, ioc->config_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + ioc->config_cmds.status = MPT2_CMD_NOT_USED; + return -EAGAIN; + } + + r = 0; + memset(mpi_reply, 0, sizeof(Mpi2ConfigReply_t)); + ioc->config_cmds.status = MPT2_CMD_PENDING; + config_request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->config_cmds.smid = smid; + memcpy(config_request, mpi_request, sizeof(Mpi2ConfigRequest_t)); +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + _config_display_some_debug(ioc, smid, "config_request", NULL); +#endif + mpt2sas_base_put_smid_default(ioc, smid, config_request->VF_ID); + timeleft = wait_for_completion_timeout(&ioc->config_cmds.done, + timeout*HZ); + if (!(ioc->config_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2ConfigRequest_t)/4); + if (!(ioc->config_cmds.status & MPT2_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + if (ioc->config_cmds.status & MPT2_CMD_REPLY_VALID) + memcpy(mpi_reply, ioc->config_cmds.reply, + sizeof(Mpi2ConfigReply_t)); + if (retry_count) + printk(MPT2SAS_INFO_FMT "%s: retry completed!!\n", + ioc->name, __func__); + ioc->config_cmds.status = MPT2_CMD_NOT_USED; + return r; + + issue_host_reset: + if (issue_reset) + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + ioc->config_cmds.status = MPT2_CMD_NOT_USED; + if (!retry_count) { + printk(MPT2SAS_INFO_FMT "%s: attempting retry\n", + ioc->name, __func__); + retry_count++; + goto retry_config; + } + return -EFAULT; +} + +/** + * _config_alloc_config_dma_memory - obtain physical memory + * @ioc: per adapter object + * @mem: struct config_request + * + * A wrapper for obtaining dma-able memory for config page request. + * + * Returns 0 for success, non-zero for failure. + */ +static int +_config_alloc_config_dma_memory(struct MPT2SAS_ADAPTER *ioc, + struct config_request *mem) +{ + int r = 0; + + mem->config_page = pci_alloc_consistent(ioc->pdev, mem->config_page_sz, + &mem->config_page_dma); + if (!mem->config_page) + r = -ENOMEM; + return r; +} + +/** + * _config_free_config_dma_memory - wrapper to free the memory + * @ioc: per adapter object + * @mem: struct config_request + * + * A wrapper to free dma-able memory when using _config_alloc_config_dma_memory. + * + * Returns 0 for success, non-zero for failure. + */ +static void +_config_free_config_dma_memory(struct MPT2SAS_ADAPTER *ioc, + struct config_request *mem) +{ + pci_free_consistent(ioc->pdev, mem->config_page_sz, mem->config_page, + mem->config_page_dma); +} + +/** + * mpt2sas_config_get_manufacturing_pg0 - obtain manufacturing page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2ManufacturingPage0_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.Header.PageLength = mpi_reply->Header.PageLength; + mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2ManufacturingPage0_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_bios_pg2 - obtain bios page 2 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_bios_pg2(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage2_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2BiosPage2_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS; + mpi_request.Header.PageNumber = 2; + mpi_request.Header.PageVersion = MPI2_BIOSPAGE2_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.Header.PageLength = mpi_reply->Header.PageLength; + mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2BiosPage2_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_bios_pg3 - obtain bios page 3 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_bios_pg3(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2BiosPage3_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2BiosPage3_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS; + mpi_request.Header.PageNumber = 3; + mpi_request.Header.PageVersion = MPI2_BIOSPAGE3_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.Header.PageLength = mpi_reply->Header.PageLength; + mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2BiosPage3_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_iounit_pg0 - obtain iounit page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage0_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2IOUnitPage0_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_IOUNITPAGE0_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.Header.PageLength = mpi_reply->Header.PageLength; + mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2IOUnitPage0_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_iounit_pg1 - obtain iounit page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2IOUnitPage1_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.Header.PageLength = mpi_reply->Header.PageLength; + mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2IOUnitPage1_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_set_iounit_pg1 - set iounit page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.Header.PageLength = mpi_reply->Header.PageLength; + mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + + memset(mem.config_page, 0, mem.config_page_sz); + memcpy(mem.config_page, &config_page, + sizeof(Mpi2IOUnitPage1_t)); + + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_WRITE_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_ioc_pg8 - obtain ioc page 8 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage8_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2IOCPage8_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IOC; + mpi_request.Header.PageNumber = 8; + mpi_request.Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.Header.PageLength = mpi_reply->Header.PageLength; + mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2IOCPage8_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_sas_device_pg0 - obtain sas device page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @form: GET_NEXT_HANDLE or HANDLE + * @handle: device handle + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_sas_device_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasDevicePage0_t *config_page, u32 form, u32 handle) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2SasDevicePage0_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE; + mpi_request.Header.PageVersion = MPI2_SASDEVICE0_PAGEVERSION; + mpi_request.Header.PageNumber = 0; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = cpu_to_le32(form | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.ExtPageLength = mpi_reply->ExtPageLength; + mpi_request.ExtPageType = mpi_reply->ExtPageType; + mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2SasDevicePage0_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_sas_device_pg1 - obtain sas device page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @form: GET_NEXT_HANDLE or HANDLE + * @handle: device handle + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_sas_device_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasDevicePage1_t *config_page, u32 form, u32 handle) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2SasDevicePage1_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE; + mpi_request.Header.PageVersion = MPI2_SASDEVICE1_PAGEVERSION; + mpi_request.Header.PageNumber = 1; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = cpu_to_le32(form | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.ExtPageLength = mpi_reply->ExtPageLength; + mpi_request.ExtPageType = mpi_reply->ExtPageType; + mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2SasDevicePage1_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_number_hba_phys - obtain number of phys on the host + * @ioc: per adapter object + * @num_phys: pointer returned with the number of phys + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER *ioc, u8 *num_phys) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + u16 ioc_status; + Mpi2ConfigReply_t mpi_reply; + Mpi2SasIOUnitPage0_t config_page; + + mutex_lock(&ioc->config_cmds.mutex); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, &mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply.Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply.Header.PageNumber; + mpi_request.Header.PageType = mpi_reply.Header.PageType; + mpi_request.ExtPageLength = mpi_reply.ExtPageLength; + mpi_request.ExtPageType = mpi_reply.ExtPageType; + mem.config_page_sz = le16_to_cpu(mpi_reply.ExtPageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, &mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { + memcpy(&config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2SasIOUnitPage0_t))); + *num_phys = config_page.NumPhys; + } + } + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_sas_iounit_pg0 - obtain sas iounit page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @sz: size of buffer passed in config_page + * Context: sleep. + * + * Calling function should call config_get_number_hba_phys prior to + * this function, so enough memory is allocated for config_page. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasIOUnitPage0_t *config_page, u16 sz) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sz); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.ExtPageLength = mpi_reply->ExtPageLength; + mpi_request.ExtPageType = mpi_reply->ExtPageType; + mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, sz, mem.config_page_sz)); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_sas_iounit_pg1 - obtain sas iounit page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @sz: size of buffer passed in config_page + * Context: sleep. + * + * Calling function should call config_get_number_hba_phys prior to + * this function, so enough memory is allocated for config_page. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sz); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.ExtPageLength = mpi_reply->ExtPageLength; + mpi_request.ExtPageType = mpi_reply->ExtPageType; + mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, sz, mem.config_page_sz)); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_expander_pg0 - obtain expander page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @form: GET_NEXT_HANDLE or HANDLE + * @handle: expander handle + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2ExpanderPage0_t *config_page, u32 form, u32 handle) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2ExpanderPage0_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_SASEXPANDER0_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = cpu_to_le32(form | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.ExtPageLength = mpi_reply->ExtPageLength; + mpi_request.ExtPageType = mpi_reply->ExtPageType; + mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2ExpanderPage0_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_expander_pg1 - obtain expander page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @phy_number: phy number + * @handle: expander handle + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_expander_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2ExpanderPage1_t *config_page, u32 phy_number, + u16 handle) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2ExpanderPage1_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI2_SASEXPANDER1_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = + cpu_to_le32(MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM | + (phy_number << MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT) | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.ExtPageLength = mpi_reply->ExtPageLength; + mpi_request.ExtPageType = mpi_reply->ExtPageType; + mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2ExpanderPage1_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_enclosure_pg0 - obtain enclosure page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @form: GET_NEXT_HANDLE or HANDLE + * @handle: expander handle + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_enclosure_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasEnclosurePage0_t *config_page, u32 form, u32 handle) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2SasEnclosurePage0_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_SASENCLOSURE0_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = cpu_to_le32(form | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.ExtPageLength = mpi_reply->ExtPageLength; + mpi_request.ExtPageType = mpi_reply->ExtPageType; + mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2SasEnclosurePage0_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_phy_pg0 - obtain phy page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @phy_number: phy number + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_phy_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2SasPhyPage0_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_SASPHY0_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = + cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.ExtPageLength = mpi_reply->ExtPageLength; + mpi_request.ExtPageType = mpi_reply->ExtPageType; + mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2SasPhyPage0_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_phy_pg1 - obtain phy page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @phy_number: phy number + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_phy_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2SasPhyPage1_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI2_SASPHY1_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = + cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.ExtPageLength = mpi_reply->ExtPageLength; + mpi_request.ExtPageType = mpi_reply->ExtPageType; + mem.config_page_sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2SasPhyPage1_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_raid_volume_pg1 - obtain raid volume page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @form: GET_NEXT_HANDLE or HANDLE + * @handle: volume handle + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_raid_volume_pg1(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form, + u32 handle) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(config_page, 0, sizeof(Mpi2RaidVolPage1_t)); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE1_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = cpu_to_le32(form | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.Header.PageLength = mpi_reply->Header.PageLength; + mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2RaidVolPage1_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_number_pds - obtain number of phys disk assigned to volume + * @ioc: per adapter object + * @handle: volume handle + * @num_pds: returns pds count + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_number_pds(struct MPT2SAS_ADAPTER *ioc, u16 handle, + u8 *num_pds) +{ + Mpi2ConfigRequest_t mpi_request; + Mpi2RaidVolPage0_t *config_page; + Mpi2ConfigReply_t mpi_reply; + int r; + struct config_request mem; + u16 ioc_status; + + mutex_lock(&ioc->config_cmds.mutex); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + *num_pds = 0; + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, &mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = + cpu_to_le32(MPI2_RAID_VOLUME_PGAD_FORM_HANDLE | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply.Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply.Header.PageNumber; + mpi_request.Header.PageType = mpi_reply.Header.PageType; + mpi_request.Header.PageLength = mpi_reply.Header.PageLength; + mem.config_page_sz = le16_to_cpu(mpi_reply.Header.PageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, &mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { + config_page = mem.config_page; + *num_pds = config_page->NumPhysDisks; + } + } + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_raid_volume_pg0 - obtain raid volume page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @form: GET_NEXT_HANDLE or HANDLE + * @handle: volume handle + * @sz: size of buffer passed in config_page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_raid_volume_pg0(struct MPT2SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form, + u32 handle, u16 sz) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + memset(config_page, 0, sz); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = cpu_to_le32(form | handle); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.Header.PageLength = mpi_reply->Header.PageLength; + mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, sz, mem.config_page_sz)); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_phys_disk_pg0 - obtain phys disk page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @form: GET_NEXT_PHYSDISKNUM, PHYSDISKNUM, DEVHANDLE + * @form_specific: specific to the form + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_phys_disk_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t + *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 form, + u32 form_specific) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + struct config_request mem; + + mutex_lock(&ioc->config_cmds.mutex); + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + memset(config_page, 0, sizeof(Mpi2RaidPhysDiskPage0_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = cpu_to_le32(form | form_specific); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply->Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply->Header.PageNumber; + mpi_request.Header.PageType = mpi_reply->Header.PageType; + mpi_request.Header.PageLength = mpi_reply->Header.PageLength; + mem.config_page_sz = le16_to_cpu(mpi_reply->Header.PageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (!r) + memcpy(config_page, mem.config_page, + min_t(u16, mem.config_page_sz, + sizeof(Mpi2RaidPhysDiskPage0_t))); + + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_volume_handle - returns volume handle for give hidden raid components + * @ioc: per adapter object + * @pd_handle: phys disk handle + * @volume_handle: volume handle + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle, + u16 *volume_handle) +{ + Mpi2RaidConfigurationPage0_t *config_page; + Mpi2ConfigRequest_t mpi_request; + Mpi2ConfigReply_t mpi_reply; + int r, i; + struct config_request mem; + u16 ioc_status; + + mutex_lock(&ioc->config_cmds.mutex); + *volume_handle = 0; + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG; + mpi_request.Header.PageVersion = MPI2_RAIDCONFIG0_PAGEVERSION; + mpi_request.Header.PageNumber = 0; + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, &mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + mpi_request.PageAddress = + cpu_to_le32(MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + mpi_request.Header.PageVersion = mpi_reply.Header.PageVersion; + mpi_request.Header.PageNumber = mpi_reply.Header.PageNumber; + mpi_request.Header.PageType = mpi_reply.Header.PageType; + mpi_request.ExtPageLength = mpi_reply.ExtPageLength; + mpi_request.ExtPageType = mpi_reply.ExtPageType; + mem.config_page_sz = le16_to_cpu(mpi_reply.ExtPageLength) * 4; + if (mem.config_page_sz > ioc->config_page_sz) { + r = _config_alloc_config_dma_memory(ioc, &mem); + if (r) + goto out; + } else { + mem.config_page_dma = ioc->config_page_dma; + mem.config_page = ioc->config_page; + } + ioc->base_add_sg_single(&mpi_request.PageBufferSGE, + MPT2_CONFIG_COMMON_SGLFLAGS | mem.config_page_sz, + mem.config_page_dma); + r = _config_request(ioc, &mpi_request, &mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT); + if (r) + goto out; + + r = -1; + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) + goto done; + config_page = mem.config_page; + for (i = 0; i < config_page->NumElements; i++) { + if ((config_page->ConfigElement[i].ElementFlags & + MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE) != + MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT) + continue; + if (config_page->ConfigElement[i].PhysDiskDevHandle == + pd_handle) { + *volume_handle = le16_to_cpu(config_page-> + ConfigElement[i].VolDevHandle); + r = 0; + goto done; + } + } + + done: + if (mem.config_page_sz > ioc->config_page_sz) + _config_free_config_dma_memory(ioc, &mem); + + out: + mutex_unlock(&ioc->config_cmds.mutex); + return r; +} + +/** + * mpt2sas_config_get_volume_wwid - returns wwid given the volume handle + * @ioc: per adapter object + * @volume_handle: volume handle + * @wwid: volume wwid + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_config_get_volume_wwid(struct MPT2SAS_ADAPTER *ioc, u16 volume_handle, + u64 *wwid) +{ + Mpi2ConfigReply_t mpi_reply; + Mpi2RaidVolPage1_t raid_vol_pg1; + + *wwid = 0; + if (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply, + &raid_vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, + volume_handle))) { + *wwid = le64_to_cpu(raid_vol_pg1.WWID); + return 0; + } else + return -1; +} diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c new file mode 100644 index 00000000000..2d4f85c9d7a --- /dev/null +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c @@ -0,0 +1,2516 @@ +/* + * Management Module Support for MPT (Message Passing Technology) based + * controllers + * + * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.c + * Copyright (C) 2007-2008 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/smp_lock.h> +#include <linux/compat.h> +#include <linux/poll.h> + +#include <linux/io.h> +#include <linux/uaccess.h> + +#include "mpt2sas_base.h" +#include "mpt2sas_ctl.h" + +static struct fasync_struct *async_queue; +static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait); + +/** + * enum block_state - blocking state + * @NON_BLOCKING: non blocking + * @BLOCKING: blocking + * + * These states are for ioctls that need to wait for a response + * from firmware, so they probably require sleep. + */ +enum block_state { + NON_BLOCKING, + BLOCKING, +}; + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _ctl_display_some_debug - debug routine + * @ioc: per adapter object + * @smid: system request message index + * @calling_function_name: string pass from calling function + * @mpi_reply: reply message frame + * Context: none. + * + * Function for displaying debug info helpfull when debugging issues + * in this module. + */ +static void +_ctl_display_some_debug(struct MPT2SAS_ADAPTER *ioc, u16 smid, + char *calling_function_name, MPI2DefaultReply_t *mpi_reply) +{ + Mpi2ConfigRequest_t *mpi_request; + char *desc = NULL; + + if (!(ioc->logging_level & MPT_DEBUG_IOCTL)) + return; + + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + switch (mpi_request->Function) { + case MPI2_FUNCTION_SCSI_IO_REQUEST: + { + Mpi2SCSIIORequest_t *scsi_request = + (Mpi2SCSIIORequest_t *)mpi_request; + + snprintf(ioc->tmp_string, MPT_STRING_LENGTH, + "scsi_io, cmd(0x%02x), cdb_len(%d)", + scsi_request->CDB.CDB32[0], + le16_to_cpu(scsi_request->IoFlags) & 0xF); + desc = ioc->tmp_string; + break; + } + case MPI2_FUNCTION_SCSI_TASK_MGMT: + desc = "task_mgmt"; + break; + case MPI2_FUNCTION_IOC_INIT: + desc = "ioc_init"; + break; + case MPI2_FUNCTION_IOC_FACTS: + desc = "ioc_facts"; + break; + case MPI2_FUNCTION_CONFIG: + { + Mpi2ConfigRequest_t *config_request = + (Mpi2ConfigRequest_t *)mpi_request; + + snprintf(ioc->tmp_string, MPT_STRING_LENGTH, + "config, type(0x%02x), ext_type(0x%02x), number(%d)", + (config_request->Header.PageType & + MPI2_CONFIG_PAGETYPE_MASK), config_request->ExtPageType, + config_request->Header.PageNumber); + desc = ioc->tmp_string; + break; + } + case MPI2_FUNCTION_PORT_FACTS: + desc = "port_facts"; + break; + case MPI2_FUNCTION_PORT_ENABLE: + desc = "port_enable"; + break; + case MPI2_FUNCTION_EVENT_NOTIFICATION: + desc = "event_notification"; + break; + case MPI2_FUNCTION_FW_DOWNLOAD: + desc = "fw_download"; + break; + case MPI2_FUNCTION_FW_UPLOAD: + desc = "fw_upload"; + break; + case MPI2_FUNCTION_RAID_ACTION: + desc = "raid_action"; + break; + case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH: + { + Mpi2SCSIIORequest_t *scsi_request = + (Mpi2SCSIIORequest_t *)mpi_request; + + snprintf(ioc->tmp_string, MPT_STRING_LENGTH, + "raid_pass, cmd(0x%02x), cdb_len(%d)", + scsi_request->CDB.CDB32[0], + le16_to_cpu(scsi_request->IoFlags) & 0xF); + desc = ioc->tmp_string; + break; + } + case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL: + desc = "sas_iounit_cntl"; + break; + case MPI2_FUNCTION_SATA_PASSTHROUGH: + desc = "sata_pass"; + break; + case MPI2_FUNCTION_DIAG_BUFFER_POST: + desc = "diag_buffer_post"; + break; + case MPI2_FUNCTION_DIAG_RELEASE: + desc = "diag_release"; + break; + case MPI2_FUNCTION_SMP_PASSTHROUGH: + desc = "smp_passthrough"; + break; + } + + if (!desc) + return; + + printk(MPT2SAS_DEBUG_FMT "%s: %s, smid(%d)\n", + ioc->name, calling_function_name, desc, smid); + + if (!mpi_reply) + return; + + if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo) + printk(MPT2SAS_DEBUG_FMT + "\tiocstatus(0x%04x), loginfo(0x%08x)\n", + ioc->name, le16_to_cpu(mpi_reply->IOCStatus), + le32_to_cpu(mpi_reply->IOCLogInfo)); + + if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || + mpi_request->Function == + MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) { + Mpi2SCSIIOReply_t *scsi_reply = + (Mpi2SCSIIOReply_t *)mpi_reply; + if (scsi_reply->SCSIState || scsi_reply->SCSIStatus) + printk(MPT2SAS_DEBUG_FMT + "\tscsi_state(0x%02x), scsi_status" + "(0x%02x)\n", ioc->name, + scsi_reply->SCSIState, + scsi_reply->SCSIStatus); + } +} +#endif + +/** + * mpt2sas_ctl_done - ctl module completion routine + * @ioc: per adapter object + * @smid: system request message index + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * Context: none. + * + * The callback handler when using ioc->ctl_cb_idx. + * + * Return nothing. + */ +void +mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + + if (ioc->ctl_cmds.status == MPT2_CMD_NOT_USED) + return; + if (ioc->ctl_cmds.smid != smid) + return; + ioc->ctl_cmds.status |= MPT2_CMD_COMPLETE; + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + if (mpi_reply) { + memcpy(ioc->ctl_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); + ioc->ctl_cmds.status |= MPT2_CMD_REPLY_VALID; + } +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + _ctl_display_some_debug(ioc, smid, "ctl_done", mpi_reply); +#endif + ioc->ctl_cmds.status &= ~MPT2_CMD_PENDING; + complete(&ioc->ctl_cmds.done); +} + +/** + * _ctl_check_event_type - determines when an event needs logging + * @ioc: per adapter object + * @event: firmware event + * + * The bitmask in ioc->event_type[] indicates which events should be + * be saved in the driver event_log. This bitmask is set by application. + * + * Returns 1 when event should be captured, or zero means no match. + */ +static int +_ctl_check_event_type(struct MPT2SAS_ADAPTER *ioc, u16 event) +{ + u16 i; + u32 desired_event; + + if (event >= 128 || !event || !ioc->event_log) + return 0; + + desired_event = (1 << (event % 32)); + if (!desired_event) + desired_event = 1; + i = event / 32; + return desired_event & ioc->event_type[i]; +} + +/** + * mpt2sas_ctl_add_to_event_log - add event + * @ioc: per adapter object + * @mpi_reply: reply message frame + * + * Return nothing. + */ +void +mpt2sas_ctl_add_to_event_log(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventNotificationReply_t *mpi_reply) +{ + struct MPT2_IOCTL_EVENTS *event_log; + u16 event; + int i; + u32 sz, event_data_sz; + u8 send_aen = 0; + + if (!ioc->event_log) + return; + + event = le16_to_cpu(mpi_reply->Event); + + if (_ctl_check_event_type(ioc, event)) { + + /* insert entry into circular event_log */ + i = ioc->event_context % MPT2SAS_CTL_EVENT_LOG_SIZE; + event_log = ioc->event_log; + event_log[i].event = event; + event_log[i].context = ioc->event_context++; + + event_data_sz = le16_to_cpu(mpi_reply->EventDataLength)*4; + sz = min_t(u32, event_data_sz, MPT2_EVENT_DATA_SIZE); + memset(event_log[i].data, 0, MPT2_EVENT_DATA_SIZE); + memcpy(event_log[i].data, mpi_reply->EventData, sz); + send_aen = 1; + } + + /* This aen_event_read_flag flag is set until the + * application has read the event log. + * For MPI2_EVENT_LOG_ENTRY_ADDED, we always notify. + */ + if (event == MPI2_EVENT_LOG_ENTRY_ADDED || + (send_aen && !ioc->aen_event_read_flag)) { + ioc->aen_event_read_flag = 1; + wake_up_interruptible(&ctl_poll_wait); + if (async_queue) + kill_fasync(&async_queue, SIGIO, POLL_IN); + } +} + +/** + * mpt2sas_ctl_event_callback - firmware event handler (called at ISR time) + * @ioc: per adapter object + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * Context: interrupt. + * + * This function merely adds a new work task into ioc->firmware_event_thread. + * The tasks are worked from _firmware_event_work in user context. + * + * Return nothing. + */ +void +mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply) +{ + Mpi2EventNotificationReply_t *mpi_reply; + + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + mpt2sas_ctl_add_to_event_log(ioc, mpi_reply); +} + +/** + * _ctl_verify_adapter - validates ioc_number passed from application + * @ioc: per adapter object + * @iocpp: The ioc pointer is returned in this. + * + * Return (-1) means error, else ioc_number. + */ +static int +_ctl_verify_adapter(int ioc_number, struct MPT2SAS_ADAPTER **iocpp) +{ + struct MPT2SAS_ADAPTER *ioc; + + list_for_each_entry(ioc, &mpt2sas_ioc_list, list) { + if (ioc->id != ioc_number) + continue; + *iocpp = ioc; + return ioc_number; + } + *iocpp = NULL; + return -1; +} + +/** + * mpt2sas_ctl_reset_handler - reset callback handler (for ctl) + * @ioc: per adapter object + * @reset_phase: phase + * + * The handler for doing any required cleanup or initialization. + * + * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET, + * MPT2_IOC_DONE_RESET + */ +void +mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) +{ + switch (reset_phase) { + case MPT2_IOC_PRE_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_PRE_RESET\n", ioc->name, __func__)); + break; + case MPT2_IOC_AFTER_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__)); + if (ioc->ctl_cmds.status & MPT2_CMD_PENDING) { + ioc->ctl_cmds.status |= MPT2_CMD_RESET; + mpt2sas_base_free_smid(ioc, ioc->ctl_cmds.smid); + complete(&ioc->ctl_cmds.done); + } + break; + case MPT2_IOC_DONE_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_DONE_RESET\n", ioc->name, __func__)); + break; + } +} + +/** + * _ctl_fasync - + * @fd - + * @filep - + * @mode - + * + * Called when application request fasyn callback handler. + */ +static int +_ctl_fasync(int fd, struct file *filep, int mode) +{ + return fasync_helper(fd, filep, mode, &async_queue); +} + +/** + * _ctl_release - + * @inode - + * @filep - + * + * Called when application releases the fasyn callback handler. + */ +static int +_ctl_release(struct inode *inode, struct file *filep) +{ + return fasync_helper(-1, filep, 0, &async_queue); +} + +/** + * _ctl_poll - + * @file - + * @wait - + * + */ +static unsigned int +_ctl_poll(struct file *filep, poll_table *wait) +{ + struct MPT2SAS_ADAPTER *ioc; + + poll_wait(filep, &ctl_poll_wait, wait); + + list_for_each_entry(ioc, &mpt2sas_ioc_list, list) { + if (ioc->aen_event_read_flag) + return POLLIN | POLLRDNORM; + } + return 0; +} + +/** + * _ctl_do_task_abort - assign an active smid to the abort_task + * @ioc: per adapter object + * @karg - (struct mpt2_ioctl_command) + * @tm_request - pointer to mf from user space + * + * Returns 0 when an smid if found, else fail. + * during failure, the reply frame is filled. + */ +static int +_ctl_do_task_abort(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg, + Mpi2SCSITaskManagementRequest_t *tm_request) +{ + u8 found = 0; + u16 i; + u16 handle; + struct scsi_cmnd *scmd; + struct MPT2SAS_DEVICE *priv_data; + unsigned long flags; + Mpi2SCSITaskManagementReply_t *tm_reply; + u32 sz; + u32 lun; + + lun = scsilun_to_int((struct scsi_lun *)tm_request->LUN); + + handle = le16_to_cpu(tm_request->DevHandle); + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + for (i = ioc->request_depth; i && !found; i--) { + scmd = ioc->scsi_lookup[i - 1].scmd; + if (scmd == NULL || scmd->device == NULL || + scmd->device->hostdata == NULL) + continue; + if (lun != scmd->device->lun) + continue; + priv_data = scmd->device->hostdata; + if (priv_data->sas_target == NULL) + continue; + if (priv_data->sas_target->handle != handle) + continue; + tm_request->TaskMID = cpu_to_le16(ioc->scsi_lookup[i - 1].smid); + found = 1; + } + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + + if (!found) { + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ABORT_TASK: " + "DevHandle(0x%04x), lun(%d), no active mid!!\n", ioc->name, + tm_request->DevHandle, lun)); + tm_reply = ioc->ctl_cmds.reply; + tm_reply->DevHandle = tm_request->DevHandle; + tm_reply->Function = MPI2_FUNCTION_SCSI_TASK_MGMT; + tm_reply->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK; + tm_reply->MsgLength = sizeof(Mpi2SCSITaskManagementReply_t)/4; + tm_reply->VP_ID = tm_request->VP_ID; + tm_reply->VF_ID = tm_request->VF_ID; + sz = min_t(u32, karg->max_reply_bytes, ioc->reply_sz); + if (copy_to_user(karg->reply_frame_buf_ptr, ioc->ctl_cmds.reply, + sz)) + printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + return 1; + } + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ABORT_TASK: " + "DevHandle(0x%04x), lun(%d), smid(%d)\n", ioc->name, + tm_request->DevHandle, lun, tm_request->TaskMID)); + return 0; +} + +/** + * _ctl_do_mpt_command - main handler for MPT2COMMAND opcode + * @ioc: per adapter object + * @karg - (struct mpt2_ioctl_command) + * @mf - pointer to mf in user space + * @state - NON_BLOCKING or BLOCKING + */ +static long +_ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc, + struct mpt2_ioctl_command karg, void __user *mf, enum block_state state) +{ + MPI2RequestHeader_t *mpi_request; + MPI2DefaultReply_t *mpi_reply; + u32 ioc_state; + u16 ioc_status; + u16 smid; + unsigned long timeout, timeleft; + u8 issue_reset; + u32 sz; + void *psge; + void *priv_sense = NULL; + void *data_out = NULL; + dma_addr_t data_out_dma; + size_t data_out_sz = 0; + void *data_in = NULL; + dma_addr_t data_in_dma; + size_t data_in_sz = 0; + u32 sgl_flags; + long ret; + u16 wait_state_count; + + issue_reset = 0; + + if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex)) + return -EAGAIN; + else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) + return -ERESTARTSYS; + + if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n", + ioc->name, __func__); + ret = -EAGAIN; + goto out; + } + + wait_state_count = 0; + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + printk(MPT2SAS_ERR_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + ret = -EFAULT; + goto out; + } + ssleep(1); + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + printk(MPT2SAS_INFO_FMT "%s: waiting for " + "operational state(count=%d)\n", ioc->name, + __func__, wait_state_count); + } + if (wait_state_count) + printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n", + ioc->name, __func__); + + smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + ret = -EAGAIN; + goto out; + } + + ret = 0; + ioc->ctl_cmds.status = MPT2_CMD_PENDING; + memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz); + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->ctl_cmds.smid = smid; + data_out_sz = karg.data_out_size; + data_in_sz = karg.data_in_size; + + /* copy in request message frame from user */ + if (copy_from_user(mpi_request, mf, karg.data_sge_offset*4)) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, __LINE__, + __func__); + ret = -EFAULT; + mpt2sas_base_free_smid(ioc, smid); + goto out; + } + + if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || + mpi_request->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) { + if (!mpi_request->FunctionDependent1 || + mpi_request->FunctionDependent1 > + cpu_to_le16(ioc->facts.MaxDevHandle)) { + ret = -EINVAL; + mpt2sas_base_free_smid(ioc, smid); + goto out; + } + } + + /* obtain dma-able memory for data transfer */ + if (data_out_sz) /* WRITE */ { + data_out = pci_alloc_consistent(ioc->pdev, data_out_sz, + &data_out_dma); + if (!data_out) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + ret = -ENOMEM; + mpt2sas_base_free_smid(ioc, smid); + goto out; + } + if (copy_from_user(data_out, karg.data_out_buf_ptr, + data_out_sz)) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + ret = -EFAULT; + mpt2sas_base_free_smid(ioc, smid); + goto out; + } + } + + if (data_in_sz) /* READ */ { + data_in = pci_alloc_consistent(ioc->pdev, data_in_sz, + &data_in_dma); + if (!data_in) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + ret = -ENOMEM; + mpt2sas_base_free_smid(ioc, smid); + goto out; + } + } + + /* add scatter gather elements */ + psge = (void *)mpi_request + (karg.data_sge_offset*4); + + if (!data_out_sz && !data_in_sz) { + mpt2sas_base_build_zero_len_sge(ioc, psge); + } else if (data_out_sz && data_in_sz) { + /* WRITE sgel first */ + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + data_out_sz, data_out_dma); + + /* incr sgel */ + psge += ioc->sge_size; + + /* READ sgel last */ + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | + MPI2_SGE_FLAGS_END_OF_LIST); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + data_in_sz, data_in_dma); + } else if (data_out_sz) /* WRITE */ { + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | + MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + data_out_sz, data_out_dma); + } else if (data_in_sz) /* READ */ { + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | + MPI2_SGE_FLAGS_END_OF_LIST); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + data_in_sz, data_in_dma); + } + + /* send command to firmware */ +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + _ctl_display_some_debug(ioc, smid, "ctl_request", NULL); +#endif + + switch (mpi_request->Function) { + case MPI2_FUNCTION_SCSI_IO_REQUEST: + case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH: + { + Mpi2SCSIIORequest_t *scsiio_request = + (Mpi2SCSIIORequest_t *)mpi_request; + scsiio_request->SenseBufferLowAddress = + (u32)mpt2sas_base_get_sense_buffer_dma(ioc, smid); + priv_sense = mpt2sas_base_get_sense_buffer(ioc, smid); + memset(priv_sense, 0, SCSI_SENSE_BUFFERSIZE); + mpt2sas_base_put_smid_scsi_io(ioc, smid, 0, + le16_to_cpu(mpi_request->FunctionDependent1)); + break; + } + case MPI2_FUNCTION_SCSI_TASK_MGMT: + { + Mpi2SCSITaskManagementRequest_t *tm_request = + (Mpi2SCSITaskManagementRequest_t *)mpi_request; + + if (tm_request->TaskType == + MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK) { + if (_ctl_do_task_abort(ioc, &karg, tm_request)) + goto out; + } + + mutex_lock(&ioc->tm_cmds.mutex); + mpt2sas_scsih_set_tm_flag(ioc, le16_to_cpu( + tm_request->DevHandle)); + mpt2sas_base_put_smid_hi_priority(ioc, smid, + mpi_request->VF_ID); + break; + } + case MPI2_FUNCTION_SMP_PASSTHROUGH: + { + Mpi2SmpPassthroughRequest_t *smp_request = + (Mpi2SmpPassthroughRequest_t *)mpi_request; + u8 *data; + + /* ioc determines which port to use */ + smp_request->PhysicalPort = 0xFF; + if (smp_request->PassthroughFlags & + MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE) + data = (u8 *)&smp_request->SGL; + else + data = data_out; + + if (data[1] == 0x91 && (data[10] == 1 || data[10] == 2)) { + ioc->ioc_link_reset_in_progress = 1; + ioc->ignore_loginfos = 1; + } + mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID); + break; + } + case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL: + { + Mpi2SasIoUnitControlRequest_t *sasiounit_request = + (Mpi2SasIoUnitControlRequest_t *)mpi_request; + + if (sasiounit_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET + || sasiounit_request->Operation == + MPI2_SAS_OP_PHY_LINK_RESET) { + ioc->ioc_link_reset_in_progress = 1; + ioc->ignore_loginfos = 1; + } + mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID); + break; + } + default: + mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID); + break; + } + + if (karg.timeout < MPT2_IOCTL_DEFAULT_TIMEOUT) + timeout = MPT2_IOCTL_DEFAULT_TIMEOUT; + else + timeout = karg.timeout; + timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done, + timeout*HZ); + if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) { + Mpi2SCSITaskManagementRequest_t *tm_request = + (Mpi2SCSITaskManagementRequest_t *)mpi_request; + mutex_unlock(&ioc->tm_cmds.mutex); + mpt2sas_scsih_clear_tm_flag(ioc, le16_to_cpu( + tm_request->DevHandle)); + } else if ((mpi_request->Function == MPI2_FUNCTION_SMP_PASSTHROUGH || + mpi_request->Function == MPI2_FUNCTION_SAS_IO_UNIT_CONTROL) && + ioc->ioc_link_reset_in_progress) { + ioc->ioc_link_reset_in_progress = 0; + ioc->ignore_loginfos = 0; + } + if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name, + __func__); + _debug_dump_mf(mpi_request, karg.data_sge_offset); + if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + mpi_reply = ioc->ctl_cmds.reply; + ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (mpi_reply->Function == MPI2_FUNCTION_SCSI_TASK_MGMT && + (ioc->logging_level & MPT_DEBUG_TM)) { + Mpi2SCSITaskManagementReply_t *tm_reply = + (Mpi2SCSITaskManagementReply_t *)mpi_reply; + + printk(MPT2SAS_DEBUG_FMT "TASK_MGMT: " + "IOCStatus(0x%04x), IOCLogInfo(0x%08x), " + "TerminationCount(0x%08x)\n", ioc->name, + tm_reply->IOCStatus, tm_reply->IOCLogInfo, + tm_reply->TerminationCount); + } +#endif + /* copy out xdata to user */ + if (data_in_sz) { + if (copy_to_user(karg.data_in_buf_ptr, data_in, + data_in_sz)) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + ret = -ENODATA; + goto out; + } + } + + /* copy out reply message frame to user */ + if (karg.max_reply_bytes) { + sz = min_t(u32, karg.max_reply_bytes, ioc->reply_sz); + if (copy_to_user(karg.reply_frame_buf_ptr, ioc->ctl_cmds.reply, + sz)) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + ret = -ENODATA; + goto out; + } + } + + /* copy out sense to user */ + if (karg.max_sense_bytes && (mpi_request->Function == + MPI2_FUNCTION_SCSI_IO_REQUEST || mpi_request->Function == + MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) { + sz = min_t(u32, karg.max_sense_bytes, SCSI_SENSE_BUFFERSIZE); + if (copy_to_user(karg.sense_data_ptr, priv_sense, sz)) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + ret = -ENODATA; + goto out; + } + } + + issue_host_reset: + if (issue_reset) { + if ((mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || + mpi_request->Function == + MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) { + printk(MPT2SAS_INFO_FMT "issue target reset: handle " + "= (0x%04x)\n", ioc->name, + mpi_request->FunctionDependent1); + mutex_lock(&ioc->tm_cmds.mutex); + mpt2sas_scsih_issue_tm(ioc, + mpi_request->FunctionDependent1, 0, + MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 10); + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->tm_cmds.mutex); + } else + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + } + + out: + + /* free memory associated with sg buffers */ + if (data_in) + pci_free_consistent(ioc->pdev, data_in_sz, data_in, + data_in_dma); + + if (data_out) + pci_free_consistent(ioc->pdev, data_out_sz, data_out, + data_out_dma); + + ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->ctl_cmds.mutex); + return ret; +} + +/** + * _ctl_getiocinfo - main handler for MPT2IOCINFO opcode + * @arg - user space buffer containing ioctl content + */ +static long +_ctl_getiocinfo(void __user *arg) +{ + struct mpt2_ioctl_iocinfo karg; + struct MPT2SAS_ADAPTER *ioc; + u8 revision; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name, + __func__)); + + memset(&karg, 0 , sizeof(karg)); + karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2; + if (ioc->pfacts) + karg.port_number = ioc->pfacts[0].PortNumber; + pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision); + karg.hw_rev = revision; + karg.pci_id = ioc->pdev->device; + karg.subsystem_device = ioc->pdev->subsystem_device; + karg.subsystem_vendor = ioc->pdev->subsystem_vendor; + karg.pci_information.u.bits.bus = ioc->pdev->bus->number; + karg.pci_information.u.bits.device = PCI_SLOT(ioc->pdev->devfn); + karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn); + karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus); + karg.firmware_version = ioc->facts.FWVersion.Word; + strncpy(karg.driver_version, MPT2SAS_DRIVER_VERSION, + MPT2_IOCTL_VERSION_LENGTH); + karg.driver_version[MPT2_IOCTL_VERSION_LENGTH - 1] = '\0'; + karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion); + + if (copy_to_user(arg, &karg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + return 0; +} + +/** + * _ctl_eventquery - main handler for MPT2EVENTQUERY opcode + * @arg - user space buffer containing ioctl content + */ +static long +_ctl_eventquery(void __user *arg) +{ + struct mpt2_ioctl_eventquery karg; + struct MPT2SAS_ADAPTER *ioc; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name, + __func__)); + + karg.event_entries = MPT2SAS_CTL_EVENT_LOG_SIZE; + memcpy(karg.event_types, ioc->event_type, + MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32)); + + if (copy_to_user(arg, &karg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + return 0; +} + +/** + * _ctl_eventenable - main handler for MPT2EVENTENABLE opcode + * @arg - user space buffer containing ioctl content + */ +static long +_ctl_eventenable(void __user *arg) +{ + struct mpt2_ioctl_eventenable karg; + struct MPT2SAS_ADAPTER *ioc; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name, + __func__)); + + if (ioc->event_log) + return 0; + memcpy(ioc->event_type, karg.event_types, + MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32)); + mpt2sas_base_validate_event_type(ioc, ioc->event_type); + + /* initialize event_log */ + ioc->event_context = 0; + ioc->aen_event_read_flag = 0; + ioc->event_log = kcalloc(MPT2SAS_CTL_EVENT_LOG_SIZE, + sizeof(struct MPT2_IOCTL_EVENTS), GFP_KERNEL); + if (!ioc->event_log) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -ENOMEM; + } + return 0; +} + +/** + * _ctl_eventreport - main handler for MPT2EVENTREPORT opcode + * @arg - user space buffer containing ioctl content + */ +static long +_ctl_eventreport(void __user *arg) +{ + struct mpt2_ioctl_eventreport karg; + struct MPT2SAS_ADAPTER *ioc; + u32 number_bytes, max_events, max; + struct mpt2_ioctl_eventreport __user *uarg = arg; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name, + __func__)); + + number_bytes = karg.hdr.max_data_size - + sizeof(struct mpt2_ioctl_header); + max_events = number_bytes/sizeof(struct MPT2_IOCTL_EVENTS); + max = min_t(u32, MPT2SAS_CTL_EVENT_LOG_SIZE, max_events); + + /* If fewer than 1 event is requested, there must have + * been some type of error. + */ + if (!max || !ioc->event_log) + return -ENODATA; + + number_bytes = max * sizeof(struct MPT2_IOCTL_EVENTS); + if (copy_to_user(uarg->event_data, ioc->event_log, number_bytes)) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + + /* reset flag so SIGIO can restart */ + ioc->aen_event_read_flag = 0; + return 0; +} + +/** + * _ctl_do_reset - main handler for MPT2HARDRESET opcode + * @arg - user space buffer containing ioctl content + */ +static long +_ctl_do_reset(void __user *arg) +{ + struct mpt2_ioctl_diag_reset karg; + struct MPT2SAS_ADAPTER *ioc; + int retval; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name, + __func__)); + + retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + printk(MPT2SAS_INFO_FMT "host reset: %s\n", + ioc->name, ((!retval) ? "SUCCESS" : "FAILED")); + return 0; +} + +/** + * _ctl_btdh_search_sas_device - searching for sas device + * @ioc: per adapter object + * @btdh: btdh ioctl payload + */ +static int +_ctl_btdh_search_sas_device(struct MPT2SAS_ADAPTER *ioc, + struct mpt2_ioctl_btdh_mapping *btdh) +{ + struct _sas_device *sas_device; + unsigned long flags; + int rc = 0; + + if (list_empty(&ioc->sas_device_list)) + return rc; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_for_each_entry(sas_device, &ioc->sas_device_list, list) { + if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF && + btdh->handle == sas_device->handle) { + btdh->bus = sas_device->channel; + btdh->id = sas_device->id; + rc = 1; + goto out; + } else if (btdh->bus == sas_device->channel && btdh->id == + sas_device->id && btdh->handle == 0xFFFF) { + btdh->handle = sas_device->handle; + rc = 1; + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return rc; +} + +/** + * _ctl_btdh_search_raid_device - searching for raid device + * @ioc: per adapter object + * @btdh: btdh ioctl payload + */ +static int +_ctl_btdh_search_raid_device(struct MPT2SAS_ADAPTER *ioc, + struct mpt2_ioctl_btdh_mapping *btdh) +{ + struct _raid_device *raid_device; + unsigned long flags; + int rc = 0; + + if (list_empty(&ioc->raid_device_list)) + return rc; + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + list_for_each_entry(raid_device, &ioc->raid_device_list, list) { + if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF && + btdh->handle == raid_device->handle) { + btdh->bus = raid_device->channel; + btdh->id = raid_device->id; + rc = 1; + goto out; + } else if (btdh->bus == raid_device->channel && btdh->id == + raid_device->id && btdh->handle == 0xFFFF) { + btdh->handle = raid_device->handle; + rc = 1; + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + return rc; +} + +/** + * _ctl_btdh_mapping - main handler for MPT2BTDHMAPPING opcode + * @arg - user space buffer containing ioctl content + */ +static long +_ctl_btdh_mapping(void __user *arg) +{ + struct mpt2_ioctl_btdh_mapping karg; + struct MPT2SAS_ADAPTER *ioc; + int rc; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + rc = _ctl_btdh_search_sas_device(ioc, &karg); + if (!rc) + _ctl_btdh_search_raid_device(ioc, &karg); + + if (copy_to_user(arg, &karg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + return 0; +} + +/** + * _ctl_diag_capability - return diag buffer capability + * @ioc: per adapter object + * @buffer_type: specifies either TRACE or SNAPSHOT + * + * returns 1 when diag buffer support is enabled in firmware + */ +static u8 +_ctl_diag_capability(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type) +{ + u8 rc = 0; + + switch (buffer_type) { + case MPI2_DIAG_BUF_TYPE_TRACE: + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) + rc = 1; + break; + case MPI2_DIAG_BUF_TYPE_SNAPSHOT: + if (ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) + rc = 1; + break; + } + + return rc; +} + +/** + * _ctl_diag_register - application register with driver + * @arg - user space buffer containing ioctl content + * @state - NON_BLOCKING or BLOCKING + * + * This will allow the driver to setup any required buffers that will be + * needed by firmware to communicate with the driver. + */ +static long +_ctl_diag_register(void __user *arg, enum block_state state) +{ + struct mpt2_diag_register karg; + struct MPT2SAS_ADAPTER *ioc; + int rc, i; + void *request_data = NULL; + dma_addr_t request_data_dma; + u32 request_data_sz = 0; + Mpi2DiagBufferPostRequest_t *mpi_request; + Mpi2DiagBufferPostReply_t *mpi_reply; + u8 buffer_type; + unsigned long timeleft; + u16 smid; + u16 ioc_status; + u8 issue_reset = 0; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + buffer_type = karg.buffer_type; + if (!_ctl_diag_capability(ioc, buffer_type)) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -EPERM; + } + + if (ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_REGISTERED) { + printk(MPT2SAS_ERR_FMT "%s: already has a registered " + "buffer for buffer_type(0x%02x)\n", ioc->name, __func__, + buffer_type); + return -EINVAL; + } + + if (karg.requested_buffer_size % 4) { + printk(MPT2SAS_ERR_FMT "%s: the requested_buffer_size " + "is not 4 byte aligned\n", ioc->name, __func__); + return -EINVAL; + } + + if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex)) + return -EAGAIN; + else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) + return -ERESTARTSYS; + + if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + ioc->ctl_cmds.status = MPT2_CMD_PENDING; + memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz); + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->ctl_cmds.smid = smid; + + request_data = ioc->diag_buffer[buffer_type]; + request_data_sz = karg.requested_buffer_size; + ioc->unique_id[buffer_type] = karg.unique_id; + ioc->diag_buffer_status[buffer_type] = 0; + memcpy(ioc->product_specific[buffer_type], karg.product_specific, + MPT2_PRODUCT_SPECIFIC_DWORDS); + ioc->diagnostic_flags[buffer_type] = karg.diagnostic_flags; + + if (request_data) { + request_data_dma = ioc->diag_buffer_dma[buffer_type]; + if (request_data_sz != ioc->diag_buffer_sz[buffer_type]) { + pci_free_consistent(ioc->pdev, + ioc->diag_buffer_sz[buffer_type], + request_data, request_data_dma); + request_data = NULL; + } + } + + if (request_data == NULL) { + ioc->diag_buffer_sz[buffer_type] = 0; + ioc->diag_buffer_dma[buffer_type] = 0; + request_data = pci_alloc_consistent( + ioc->pdev, request_data_sz, &request_data_dma); + if (request_data == NULL) { + printk(MPT2SAS_ERR_FMT "%s: failed allocating memory" + " for diag buffers, requested size(%d)\n", + ioc->name, __func__, request_data_sz); + mpt2sas_base_free_smid(ioc, smid); + return -ENOMEM; + } + ioc->diag_buffer[buffer_type] = request_data; + ioc->diag_buffer_sz[buffer_type] = request_data_sz; + ioc->diag_buffer_dma[buffer_type] = request_data_dma; + } + + mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST; + mpi_request->BufferType = karg.buffer_type; + mpi_request->Flags = cpu_to_le32(karg.diagnostic_flags); + mpi_request->BufferAddress = cpu_to_le64(request_data_dma); + mpi_request->BufferLength = cpu_to_le32(request_data_sz); + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: diag_buffer(0x%p), " + "dma(0x%llx), sz(%d)\n", ioc->name, __func__, request_data, + (unsigned long long)request_data_dma, mpi_request->BufferLength)); + + for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++) + mpi_request->ProductSpecific[i] = + cpu_to_le32(ioc->product_specific[buffer_type][i]); + + mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID); + timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done, + MPT2_IOCTL_DEFAULT_TIMEOUT*HZ); + + if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name, + __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2DiagBufferPostRequest_t)/4); + if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + /* process the completed Reply Message Frame */ + if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) { + printk(MPT2SAS_ERR_FMT "%s: no reply message\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + + mpi_reply = ioc->ctl_cmds.reply; + ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; + + if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { + ioc->diag_buffer_status[buffer_type] |= + MPT2_DIAG_BUFFER_IS_REGISTERED; + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: success\n", + ioc->name, __func__)); + } else { + printk(MPT2SAS_DEBUG_FMT "%s: ioc_status(0x%04x) " + "log_info(0x%08x)\n", ioc->name, __func__, + ioc_status, mpi_reply->IOCLogInfo); + rc = -EFAULT; + } + + issue_host_reset: + if (issue_reset) + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + + out: + + if (rc && request_data) + pci_free_consistent(ioc->pdev, request_data_sz, + request_data, request_data_dma); + + ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->ctl_cmds.mutex); + return rc; +} + +/** + * _ctl_diag_unregister - application unregister with driver + * @arg - user space buffer containing ioctl content + * + * This will allow the driver to cleanup any memory allocated for diag + * messages and to free up any resources. + */ +static long +_ctl_diag_unregister(void __user *arg) +{ + struct mpt2_diag_unregister karg; + struct MPT2SAS_ADAPTER *ioc; + void *request_data; + dma_addr_t request_data_dma; + u32 request_data_sz; + u8 buffer_type; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + buffer_type = karg.unique_id & 0x000000ff; + if (!_ctl_diag_capability(ioc, buffer_type)) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -EPERM; + } + + if ((ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) { + printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not " + "registered\n", ioc->name, __func__, buffer_type); + return -EINVAL; + } + if ((ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_RELEASED) == 0) { + printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) has not been " + "released\n", ioc->name, __func__, buffer_type); + return -EINVAL; + } + + if (karg.unique_id != ioc->unique_id[buffer_type]) { + printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not " + "registered\n", ioc->name, __func__, karg.unique_id); + return -EINVAL; + } + + request_data = ioc->diag_buffer[buffer_type]; + if (!request_data) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -ENOMEM; + } + + request_data_sz = ioc->diag_buffer_sz[buffer_type]; + request_data_dma = ioc->diag_buffer_dma[buffer_type]; + pci_free_consistent(ioc->pdev, request_data_sz, + request_data, request_data_dma); + ioc->diag_buffer[buffer_type] = NULL; + ioc->diag_buffer_status[buffer_type] = 0; + return 0; +} + +/** + * _ctl_diag_query - query relevant info associated with diag buffers + * @arg - user space buffer containing ioctl content + * + * The application will send only buffer_type and unique_id. Driver will + * inspect unique_id first, if valid, fill in all the info. If unique_id is + * 0x00, the driver will return info specified by Buffer Type. + */ +static long +_ctl_diag_query(void __user *arg) +{ + struct mpt2_diag_query karg; + struct MPT2SAS_ADAPTER *ioc; + void *request_data; + int i; + u8 buffer_type; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + karg.application_flags = 0; + buffer_type = karg.buffer_type; + + if (!_ctl_diag_capability(ioc, buffer_type)) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -EPERM; + } + + if ((ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) { + printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not " + "registered\n", ioc->name, __func__, buffer_type); + return -EINVAL; + } + + if (karg.unique_id & 0xffffff00) { + if (karg.unique_id != ioc->unique_id[buffer_type]) { + printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not " + "registered\n", ioc->name, __func__, + karg.unique_id); + return -EINVAL; + } + } + + request_data = ioc->diag_buffer[buffer_type]; + if (!request_data) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have buffer for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -ENOMEM; + } + + if (ioc->diag_buffer_status[buffer_type] & MPT2_DIAG_BUFFER_IS_RELEASED) + karg.application_flags = (MPT2_APP_FLAGS_APP_OWNED | + MPT2_APP_FLAGS_BUFFER_VALID); + else + karg.application_flags = (MPT2_APP_FLAGS_APP_OWNED | + MPT2_APP_FLAGS_BUFFER_VALID | + MPT2_APP_FLAGS_FW_BUFFER_ACCESS); + + for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++) + karg.product_specific[i] = + ioc->product_specific[buffer_type][i]; + + karg.total_buffer_size = ioc->diag_buffer_sz[buffer_type]; + karg.driver_added_buffer_size = 0; + karg.unique_id = ioc->unique_id[buffer_type]; + karg.diagnostic_flags = ioc->diagnostic_flags[buffer_type]; + + if (copy_to_user(arg, &karg, sizeof(struct mpt2_diag_query))) { + printk(MPT2SAS_ERR_FMT "%s: unable to write mpt2_diag_query " + "data @ %p\n", ioc->name, __func__, arg); + return -EFAULT; + } + return 0; +} + +/** + * _ctl_diag_release - request to send Diag Release Message to firmware + * @arg - user space buffer containing ioctl content + * @state - NON_BLOCKING or BLOCKING + * + * This allows ownership of the specified buffer to returned to the driver, + * allowing an application to read the buffer without fear that firmware is + * overwritting information in the buffer. + */ +static long +_ctl_diag_release(void __user *arg, enum block_state state) +{ + struct mpt2_diag_release karg; + struct MPT2SAS_ADAPTER *ioc; + void *request_data; + int rc; + Mpi2DiagReleaseRequest_t *mpi_request; + Mpi2DiagReleaseReply_t *mpi_reply; + u8 buffer_type; + unsigned long timeleft; + u16 smid; + u16 ioc_status; + u8 issue_reset = 0; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + buffer_type = karg.unique_id & 0x000000ff; + if (!_ctl_diag_capability(ioc, buffer_type)) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -EPERM; + } + + if ((ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) { + printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not " + "registered\n", ioc->name, __func__, buffer_type); + return -EINVAL; + } + + if (karg.unique_id != ioc->unique_id[buffer_type]) { + printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not " + "registered\n", ioc->name, __func__, karg.unique_id); + return -EINVAL; + } + + if (ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_RELEASED) { + printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) " + "is already released\n", ioc->name, __func__, + buffer_type); + return 0; + } + + request_data = ioc->diag_buffer[buffer_type]; + + if (!request_data) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -ENOMEM; + } + + if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex)) + return -EAGAIN; + else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) + return -ERESTARTSYS; + + if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + ioc->ctl_cmds.status = MPT2_CMD_PENDING; + memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz); + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->ctl_cmds.smid = smid; + + mpi_request->Function = MPI2_FUNCTION_DIAG_RELEASE; + mpi_request->BufferType = buffer_type; + + mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID); + timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done, + MPT2_IOCTL_DEFAULT_TIMEOUT*HZ); + + if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name, + __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2DiagReleaseRequest_t)/4); + if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + /* process the completed Reply Message Frame */ + if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) { + printk(MPT2SAS_ERR_FMT "%s: no reply message\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + + mpi_reply = ioc->ctl_cmds.reply; + ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; + + if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { + ioc->diag_buffer_status[buffer_type] |= + MPT2_DIAG_BUFFER_IS_RELEASED; + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: success\n", + ioc->name, __func__)); + } else { + printk(MPT2SAS_DEBUG_FMT "%s: ioc_status(0x%04x) " + "log_info(0x%08x)\n", ioc->name, __func__, + ioc_status, mpi_reply->IOCLogInfo); + rc = -EFAULT; + } + + issue_host_reset: + if (issue_reset) + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + + out: + + ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->ctl_cmds.mutex); + return rc; +} + +/** + * _ctl_diag_read_buffer - request for copy of the diag buffer + * @arg - user space buffer containing ioctl content + * @state - NON_BLOCKING or BLOCKING + */ +static long +_ctl_diag_read_buffer(void __user *arg, enum block_state state) +{ + struct mpt2_diag_read_buffer karg; + struct mpt2_diag_read_buffer __user *uarg = arg; + struct MPT2SAS_ADAPTER *ioc; + void *request_data, *diag_data; + Mpi2DiagBufferPostRequest_t *mpi_request; + Mpi2DiagBufferPostReply_t *mpi_reply; + int rc, i; + u8 buffer_type; + unsigned long timeleft; + u16 smid; + u16 ioc_status; + u8 issue_reset = 0; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + buffer_type = karg.unique_id & 0x000000ff; + if (!_ctl_diag_capability(ioc, buffer_type)) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -EPERM; + } + + if (karg.unique_id != ioc->unique_id[buffer_type]) { + printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not " + "registered\n", ioc->name, __func__, karg.unique_id); + return -EINVAL; + } + + request_data = ioc->diag_buffer[buffer_type]; + if (!request_data) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have buffer for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -ENOMEM; + } + + if ((karg.starting_offset % 4) || (karg.bytes_to_read % 4)) { + printk(MPT2SAS_ERR_FMT "%s: either the starting_offset " + "or bytes_to_read are not 4 byte aligned\n", ioc->name, + __func__); + return -EINVAL; + } + + diag_data = (void *)(request_data + karg.starting_offset); + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: diag_buffer(%p), " + "offset(%d), sz(%d)\n", ioc->name, __func__, + diag_data, karg.starting_offset, karg.bytes_to_read)); + + if (copy_to_user((void __user *)uarg->diagnostic_data, + diag_data, karg.bytes_to_read)) { + printk(MPT2SAS_ERR_FMT "%s: Unable to write " + "mpt_diag_read_buffer_t data @ %p\n", ioc->name, + __func__, diag_data); + return -EFAULT; + } + + if ((karg.flags & MPT2_FLAGS_REREGISTER) == 0) + return 0; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: Reregister " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type)); + if ((ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_RELEASED) == 0) { + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "buffer_type(0x%02x) is still registered\n", ioc->name, + __func__, buffer_type)); + return 0; + } + /* Get a free request frame and save the message context. + */ + if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex)) + return -EAGAIN; + else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) + return -ERESTARTSYS; + + if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + ioc->ctl_cmds.status = MPT2_CMD_PENDING; + memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz); + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->ctl_cmds.smid = smid; + + mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST; + mpi_request->BufferType = buffer_type; + mpi_request->BufferLength = + cpu_to_le32(ioc->diag_buffer_sz[buffer_type]); + mpi_request->BufferAddress = + cpu_to_le64(ioc->diag_buffer_dma[buffer_type]); + for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++) + mpi_request->ProductSpecific[i] = + cpu_to_le32(ioc->product_specific[buffer_type][i]); + + mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID); + timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done, + MPT2_IOCTL_DEFAULT_TIMEOUT*HZ); + + if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name, + __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2DiagBufferPostRequest_t)/4); + if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + /* process the completed Reply Message Frame */ + if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) { + printk(MPT2SAS_ERR_FMT "%s: no reply message\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + + mpi_reply = ioc->ctl_cmds.reply; + ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; + + if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { + ioc->diag_buffer_status[buffer_type] |= + MPT2_DIAG_BUFFER_IS_REGISTERED; + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: success\n", + ioc->name, __func__)); + } else { + printk(MPT2SAS_DEBUG_FMT "%s: ioc_status(0x%04x) " + "log_info(0x%08x)\n", ioc->name, __func__, + ioc_status, mpi_reply->IOCLogInfo); + rc = -EFAULT; + } + + issue_host_reset: + if (issue_reset) + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + + out: + + ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->ctl_cmds.mutex); + return rc; +} + +/** + * _ctl_ioctl_main - main ioctl entry point + * @file - (struct file) + * @cmd - ioctl opcode + * @arg - + */ +static long +_ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg) +{ + enum block_state state; + long ret = -EINVAL; + unsigned long flags; + + state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING : + BLOCKING; + + switch (cmd) { + case MPT2IOCINFO: + if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_iocinfo)) + ret = _ctl_getiocinfo(arg); + break; + case MPT2COMMAND: + { + struct mpt2_ioctl_command karg; + struct mpt2_ioctl_command __user *uarg; + struct MPT2SAS_ADAPTER *ioc; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || + !ioc) + return -ENODEV; + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->shost_recovery) { + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, + flags); + return -EAGAIN; + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_command)) { + uarg = arg; + ret = _ctl_do_mpt_command(ioc, karg, &uarg->mf, state); + } + break; + } + case MPT2EVENTQUERY: + if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_eventquery)) + ret = _ctl_eventquery(arg); + break; + case MPT2EVENTENABLE: + if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_eventenable)) + ret = _ctl_eventenable(arg); + break; + case MPT2EVENTREPORT: + ret = _ctl_eventreport(arg); + break; + case MPT2HARDRESET: + if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_diag_reset)) + ret = _ctl_do_reset(arg); + break; + case MPT2BTDHMAPPING: + if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_btdh_mapping)) + ret = _ctl_btdh_mapping(arg); + break; + case MPT2DIAGREGISTER: + if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_register)) + ret = _ctl_diag_register(arg, state); + break; + case MPT2DIAGUNREGISTER: + if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_unregister)) + ret = _ctl_diag_unregister(arg); + break; + case MPT2DIAGQUERY: + if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_query)) + ret = _ctl_diag_query(arg); + break; + case MPT2DIAGRELEASE: + if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_release)) + ret = _ctl_diag_release(arg, state); + break; + case MPT2DIAGREADBUFFER: + if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_read_buffer)) + ret = _ctl_diag_read_buffer(arg, state); + break; + default: + { + struct mpt2_ioctl_command karg; + struct MPT2SAS_ADAPTER *ioc; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || + !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "unsupported ioctl opcode(0x%08x)\n", ioc->name, cmd)); + break; + } + } + return ret; +} + +/** + * _ctl_ioctl - main ioctl entry point (unlocked) + * @file - (struct file) + * @cmd - ioctl opcode + * @arg - + */ +static long +_ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + long ret; + lock_kernel(); + ret = _ctl_ioctl_main(file, cmd, (void __user *)arg); + unlock_kernel(); + return ret; +} + +#ifdef CONFIG_COMPAT +/** + * _ctl_compat_mpt_command - convert 32bit pointers to 64bit. + * @file - (struct file) + * @cmd - ioctl opcode + * @arg - (struct mpt2_ioctl_command32) + * + * MPT2COMMAND32 - Handle 32bit applications running on 64bit os. + */ +static long +_ctl_compat_mpt_command(struct file *file, unsigned cmd, unsigned long arg) +{ + struct mpt2_ioctl_command32 karg32; + struct mpt2_ioctl_command32 __user *uarg; + struct mpt2_ioctl_command karg; + struct MPT2SAS_ADAPTER *ioc; + enum block_state state; + unsigned long flags; + + if (_IOC_SIZE(cmd) != sizeof(struct mpt2_ioctl_command32)) + return -EINVAL; + + uarg = (struct mpt2_ioctl_command32 __user *) arg; + + if (copy_from_user(&karg32, (char __user *)arg, sizeof(karg32))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg32.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->shost_recovery) { + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, + flags); + return -EAGAIN; + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + memset(&karg, 0, sizeof(struct mpt2_ioctl_command)); + karg.hdr.ioc_number = karg32.hdr.ioc_number; + karg.hdr.port_number = karg32.hdr.port_number; + karg.hdr.max_data_size = karg32.hdr.max_data_size; + karg.timeout = karg32.timeout; + karg.max_reply_bytes = karg32.max_reply_bytes; + karg.data_in_size = karg32.data_in_size; + karg.data_out_size = karg32.data_out_size; + karg.max_sense_bytes = karg32.max_sense_bytes; + karg.data_sge_offset = karg32.data_sge_offset; + memcpy(&karg.reply_frame_buf_ptr, &karg32.reply_frame_buf_ptr, + sizeof(uint32_t)); + memcpy(&karg.data_in_buf_ptr, &karg32.data_in_buf_ptr, + sizeof(uint32_t)); + memcpy(&karg.data_out_buf_ptr, &karg32.data_out_buf_ptr, + sizeof(uint32_t)); + memcpy(&karg.sense_data_ptr, &karg32.sense_data_ptr, + sizeof(uint32_t)); + state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING : BLOCKING; + return _ctl_do_mpt_command(ioc, karg, &uarg->mf, state); +} + +/** + * _ctl_ioctl_compat - main ioctl entry point (compat) + * @file - + * @cmd - + * @arg - + * + * This routine handles 32 bit applications in 64bit os. + */ +static long +_ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg) +{ + long ret; + lock_kernel(); + if (cmd == MPT2COMMAND32) + ret = _ctl_compat_mpt_command(file, cmd, arg); + else + ret = _ctl_ioctl_main(file, cmd, (void __user *)arg); + unlock_kernel(); + return ret; +} +#endif + +/* scsi host attributes */ + +/** + * _ctl_version_fw_show - firmware version + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_version_fw_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n", + (ioc->facts.FWVersion.Word & 0xFF000000) >> 24, + (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16, + (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8, + ioc->facts.FWVersion.Word & 0x000000FF); +} +static DEVICE_ATTR(version_fw, S_IRUGO, _ctl_version_fw_show, NULL); + +/** + * _ctl_version_bios_show - bios version + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_version_bios_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + u32 version = le32_to_cpu(ioc->bios_pg3.BiosVersion); + + return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n", + (version & 0xFF000000) >> 24, + (version & 0x00FF0000) >> 16, + (version & 0x0000FF00) >> 8, + version & 0x000000FF); +} +static DEVICE_ATTR(version_bios, S_IRUGO, _ctl_version_bios_show, NULL); + +/** + * _ctl_version_mpi_show - MPI (message passing interface) version + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_version_mpi_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%03x.%02x\n", + ioc->facts.MsgVersion, ioc->facts.HeaderVersion >> 8); +} +static DEVICE_ATTR(version_mpi, S_IRUGO, _ctl_version_mpi_show, NULL); + +/** + * _ctl_version_product_show - product name + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_version_product_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, 16, "%s\n", ioc->manu_pg0.ChipName); +} +static DEVICE_ATTR(version_product, S_IRUGO, + _ctl_version_product_show, NULL); + +/** + * _ctl_version_nvdata_persistent_show - ndvata persistent version + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_version_nvdata_persistent_show(struct device *cdev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%02xh\n", + le16_to_cpu(ioc->iounit_pg0.NvdataVersionPersistent.Word)); +} +static DEVICE_ATTR(version_nvdata_persistent, S_IRUGO, + _ctl_version_nvdata_persistent_show, NULL); + +/** + * _ctl_version_nvdata_default_show - nvdata default version + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_version_nvdata_default_show(struct device *cdev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%02xh\n", + le16_to_cpu(ioc->iounit_pg0.NvdataVersionDefault.Word)); +} +static DEVICE_ATTR(version_nvdata_default, S_IRUGO, + _ctl_version_nvdata_default_show, NULL); + +/** + * _ctl_board_name_show - board name + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_board_name_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardName); +} +static DEVICE_ATTR(board_name, S_IRUGO, _ctl_board_name_show, NULL); + +/** + * _ctl_board_assembly_show - board assembly name + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_board_assembly_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardAssembly); +} +static DEVICE_ATTR(board_assembly, S_IRUGO, + _ctl_board_assembly_show, NULL); + +/** + * _ctl_board_tracer_show - board tracer number + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_board_tracer_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardTracerNumber); +} +static DEVICE_ATTR(board_tracer, S_IRUGO, + _ctl_board_tracer_show, NULL); + +/** + * _ctl_io_delay_show - io missing delay + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * This is for firmware implemention for deboucing device + * removal events. + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_io_delay_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay); +} +static DEVICE_ATTR(io_delay, S_IRUGO, + _ctl_io_delay_show, NULL); + +/** + * _ctl_device_delay_show - device missing delay + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * This is for firmware implemention for deboucing device + * removal events. + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_device_delay_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay); +} +static DEVICE_ATTR(device_delay, S_IRUGO, + _ctl_device_delay_show, NULL); + +/** + * _ctl_fw_queue_depth_show - global credits + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * This is firmware queue depth limit + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_fw_queue_depth_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->facts.RequestCredit); +} +static DEVICE_ATTR(fw_queue_depth, S_IRUGO, + _ctl_fw_queue_depth_show, NULL); + +/** + * _ctl_sas_address_show - sas address + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * This is the controller sas address + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_host_sas_address_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "0x%016llx\n", + (unsigned long long)ioc->sas_hba.sas_address); +} +static DEVICE_ATTR(host_sas_address, S_IRUGO, + _ctl_host_sas_address_show, NULL); + +/** + * _ctl_logging_level_show - logging level + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * A sysfs 'read/write' shost attribute. + */ +static ssize_t +_ctl_logging_level_show(struct device *cdev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->logging_level); +} +static ssize_t +_ctl_logging_level_store(struct device *cdev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + int val = 0; + + if (sscanf(buf, "%x", &val) != 1) + return -EINVAL; + + ioc->logging_level = val; + printk(MPT2SAS_INFO_FMT "logging_level=%08xh\n", ioc->name, + ioc->logging_level); + return strlen(buf); +} +static DEVICE_ATTR(logging_level, S_IRUGO | S_IWUSR, + _ctl_logging_level_show, _ctl_logging_level_store); + +struct device_attribute *mpt2sas_host_attrs[] = { + &dev_attr_version_fw, + &dev_attr_version_bios, + &dev_attr_version_mpi, + &dev_attr_version_product, + &dev_attr_version_nvdata_persistent, + &dev_attr_version_nvdata_default, + &dev_attr_board_name, + &dev_attr_board_assembly, + &dev_attr_board_tracer, + &dev_attr_io_delay, + &dev_attr_device_delay, + &dev_attr_logging_level, + &dev_attr_fw_queue_depth, + &dev_attr_host_sas_address, + NULL, +}; + +/* device attributes */ + +/** + * _ctl_device_sas_address_show - sas address + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * This is the sas address for the target + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_device_sas_address_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct MPT2SAS_DEVICE *sas_device_priv_data = sdev->hostdata; + + return snprintf(buf, PAGE_SIZE, "0x%016llx\n", + (unsigned long long)sas_device_priv_data->sas_target->sas_address); +} +static DEVICE_ATTR(sas_address, S_IRUGO, _ctl_device_sas_address_show, NULL); + +/** + * _ctl_device_handle_show - device handle + * @cdev - pointer to embedded class device + * @buf - the buffer returned + * + * This is the firmware assigned device handle + * + * A sysfs 'read-only' shost attribute. + */ +static ssize_t +_ctl_device_handle_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct MPT2SAS_DEVICE *sas_device_priv_data = sdev->hostdata; + + return snprintf(buf, PAGE_SIZE, "0x%04x\n", + sas_device_priv_data->sas_target->handle); +} +static DEVICE_ATTR(sas_device_handle, S_IRUGO, _ctl_device_handle_show, NULL); + +struct device_attribute *mpt2sas_dev_attrs[] = { + &dev_attr_sas_address, + &dev_attr_sas_device_handle, + NULL, +}; + +static const struct file_operations ctl_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = _ctl_ioctl, + .release = _ctl_release, + .poll = _ctl_poll, + .fasync = _ctl_fasync, +#ifdef CONFIG_COMPAT + .compat_ioctl = _ctl_ioctl_compat, +#endif +}; + +static struct miscdevice ctl_dev = { + .minor = MPT2SAS_MINOR, + .name = MPT2SAS_DEV_NAME, + .fops = &ctl_fops, +}; + +/** + * mpt2sas_ctl_init - main entry point for ctl. + * + */ +void +mpt2sas_ctl_init(void) +{ + async_queue = NULL; + if (misc_register(&ctl_dev) < 0) + printk(KERN_ERR "%s can't register misc device [minor=%d]\n", + MPT2SAS_DRIVER_NAME, MPT2SAS_MINOR); + + init_waitqueue_head(&ctl_poll_wait); +} + +/** + * mpt2sas_ctl_exit - exit point for ctl + * + */ +void +mpt2sas_ctl_exit(void) +{ + struct MPT2SAS_ADAPTER *ioc; + int i; + + list_for_each_entry(ioc, &mpt2sas_ioc_list, list) { + + /* free memory associated to diag buffers */ + for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) { + if (!ioc->diag_buffer[i]) + continue; + pci_free_consistent(ioc->pdev, ioc->diag_buffer_sz[i], + ioc->diag_buffer[i], ioc->diag_buffer_dma[i]); + ioc->diag_buffer[i] = NULL; + ioc->diag_buffer_status[i] = 0; + } + + kfree(ioc->event_log); + } + misc_deregister(&ctl_dev); +} + diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.h b/drivers/scsi/mpt2sas/mpt2sas_ctl.h new file mode 100644 index 00000000000..dbb6c0cf888 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.h @@ -0,0 +1,416 @@ +/* + * Management Module Support for MPT (Message Passing Technology) based + * controllers + * + * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.h + * Copyright (C) 2007-2008 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#ifndef MPT2SAS_CTL_H_INCLUDED +#define MPT2SAS_CTL_H_INCLUDED + +#ifdef __KERNEL__ +#include <linux/miscdevice.h> +#endif + +#define MPT2SAS_DEV_NAME "mpt2ctl" +#define MPT2_MAGIC_NUMBER 'm' +#define MPT2_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */ + +/** + * IOCTL opcodes + */ +#define MPT2IOCINFO _IOWR(MPT2_MAGIC_NUMBER, 17, \ + struct mpt2_ioctl_iocinfo) +#define MPT2COMMAND _IOWR(MPT2_MAGIC_NUMBER, 20, \ + struct mpt2_ioctl_command) +#ifdef CONFIG_COMPAT +#define MPT2COMMAND32 _IOWR(MPT2_MAGIC_NUMBER, 20, \ + struct mpt2_ioctl_command32) +#endif +#define MPT2EVENTQUERY _IOWR(MPT2_MAGIC_NUMBER, 21, \ + struct mpt2_ioctl_eventquery) +#define MPT2EVENTENABLE _IOWR(MPT2_MAGIC_NUMBER, 22, \ + struct mpt2_ioctl_eventenable) +#define MPT2EVENTREPORT _IOWR(MPT2_MAGIC_NUMBER, 23, \ + struct mpt2_ioctl_eventreport) +#define MPT2HARDRESET _IOWR(MPT2_MAGIC_NUMBER, 24, \ + struct mpt2_ioctl_diag_reset) +#define MPT2BTDHMAPPING _IOWR(MPT2_MAGIC_NUMBER, 31, \ + struct mpt2_ioctl_btdh_mapping) + +/* diag buffer support */ +#define MPT2DIAGREGISTER _IOWR(MPT2_MAGIC_NUMBER, 26, \ + struct mpt2_diag_register) +#define MPT2DIAGRELEASE _IOWR(MPT2_MAGIC_NUMBER, 27, \ + struct mpt2_diag_release) +#define MPT2DIAGUNREGISTER _IOWR(MPT2_MAGIC_NUMBER, 28, \ + struct mpt2_diag_unregister) +#define MPT2DIAGQUERY _IOWR(MPT2_MAGIC_NUMBER, 29, \ + struct mpt2_diag_query) +#define MPT2DIAGREADBUFFER _IOWR(MPT2_MAGIC_NUMBER, 30, \ + struct mpt2_diag_read_buffer) + +/** + * struct mpt2_ioctl_header - main header structure + * @ioc_number - IOC unit number + * @port_number - IOC port number + * @max_data_size - maximum number bytes to transfer on read + */ +struct mpt2_ioctl_header { + uint32_t ioc_number; + uint32_t port_number; + uint32_t max_data_size; +}; + +/** + * struct mpt2_ioctl_diag_reset - diagnostic reset + * @hdr - generic header + */ +struct mpt2_ioctl_diag_reset { + struct mpt2_ioctl_header hdr; +}; + + +/** + * struct mpt2_ioctl_pci_info - pci device info + * @device - pci device id + * @function - pci function id + * @bus - pci bus id + * @segment_id - pci segment id + */ +struct mpt2_ioctl_pci_info { + union { + struct { + uint32_t device:5; + uint32_t function:3; + uint32_t bus:24; + } bits; + uint32_t word; + } u; + uint32_t segment_id; +}; + + +#define MPT2_IOCTL_INTERFACE_SCSI (0x00) +#define MPT2_IOCTL_INTERFACE_FC (0x01) +#define MPT2_IOCTL_INTERFACE_FC_IP (0x02) +#define MPT2_IOCTL_INTERFACE_SAS (0x03) +#define MPT2_IOCTL_INTERFACE_SAS2 (0x04) +#define MPT2_IOCTL_VERSION_LENGTH (32) + +/** + * struct mpt2_ioctl_iocinfo - generic controller info + * @hdr - generic header + * @adapter_type - type of adapter (spi, fc, sas) + * @port_number - port number + * @pci_id - PCI Id + * @hw_rev - hardware revision + * @sub_system_device - PCI subsystem Device ID + * @sub_system_vendor - PCI subsystem Vendor ID + * @rsvd0 - reserved + * @firmware_version - firmware version + * @bios_version - BIOS version + * @driver_version - driver version - 32 ASCII characters + * @rsvd1 - reserved + * @scsi_id - scsi id of adapter 0 + * @rsvd2 - reserved + * @pci_information - pci info (2nd revision) + */ +struct mpt2_ioctl_iocinfo { + struct mpt2_ioctl_header hdr; + uint32_t adapter_type; + uint32_t port_number; + uint32_t pci_id; + uint32_t hw_rev; + uint32_t subsystem_device; + uint32_t subsystem_vendor; + uint32_t rsvd0; + uint32_t firmware_version; + uint32_t bios_version; + uint8_t driver_version[MPT2_IOCTL_VERSION_LENGTH]; + uint8_t rsvd1; + uint8_t scsi_id; + uint16_t rsvd2; + struct mpt2_ioctl_pci_info pci_information; +}; + + +/* number of event log entries */ +#define MPT2SAS_CTL_EVENT_LOG_SIZE (50) + +/** + * struct mpt2_ioctl_eventquery - query event count and type + * @hdr - generic header + * @event_entries - number of events returned by get_event_report + * @rsvd - reserved + * @event_types - type of events currently being captured + */ +struct mpt2_ioctl_eventquery { + struct mpt2_ioctl_header hdr; + uint16_t event_entries; + uint16_t rsvd; + uint32_t event_types[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; +}; + +/** + * struct mpt2_ioctl_eventenable - enable/disable event capturing + * @hdr - generic header + * @event_types - toggle off/on type of events to be captured + */ +struct mpt2_ioctl_eventenable { + struct mpt2_ioctl_header hdr; + uint32_t event_types[4]; +}; + +#define MPT2_EVENT_DATA_SIZE (192) +/** + * struct MPT2_IOCTL_EVENTS - + * @event - the event that was reported + * @context - unique value for each event assigned by driver + * @data - event data returned in fw reply message + */ +struct MPT2_IOCTL_EVENTS { + uint32_t event; + uint32_t context; + uint8_t data[MPT2_EVENT_DATA_SIZE]; +}; + +/** + * struct mpt2_ioctl_eventreport - returing event log + * @hdr - generic header + * @event_data - (see struct MPT2_IOCTL_EVENTS) + */ +struct mpt2_ioctl_eventreport { + struct mpt2_ioctl_header hdr; + struct MPT2_IOCTL_EVENTS event_data[1]; +}; + +/** + * struct mpt2_ioctl_command - generic mpt firmware passthru ioclt + * @hdr - generic header + * @timeout - command timeout in seconds. (if zero then use driver default + * value). + * @reply_frame_buf_ptr - reply location + * @data_in_buf_ptr - destination for read + * @data_out_buf_ptr - data source for write + * @sense_data_ptr - sense data location + * @max_reply_bytes - maximum number of reply bytes to be sent to app. + * @data_in_size - number bytes for data transfer in (read) + * @data_out_size - number bytes for data transfer out (write) + * @max_sense_bytes - maximum number of bytes for auto sense buffers + * @data_sge_offset - offset in words from the start of the request message to + * the first SGL + * @mf[1]; + */ +struct mpt2_ioctl_command { + struct mpt2_ioctl_header hdr; + uint32_t timeout; + void __user *reply_frame_buf_ptr; + void __user *data_in_buf_ptr; + void __user *data_out_buf_ptr; + void __user *sense_data_ptr; + uint32_t max_reply_bytes; + uint32_t data_in_size; + uint32_t data_out_size; + uint32_t max_sense_bytes; + uint32_t data_sge_offset; + uint8_t mf[1]; +}; + +#ifdef CONFIG_COMPAT +struct mpt2_ioctl_command32 { + struct mpt2_ioctl_header hdr; + uint32_t timeout; + uint32_t reply_frame_buf_ptr; + uint32_t data_in_buf_ptr; + uint32_t data_out_buf_ptr; + uint32_t sense_data_ptr; + uint32_t max_reply_bytes; + uint32_t data_in_size; + uint32_t data_out_size; + uint32_t max_sense_bytes; + uint32_t data_sge_offset; + uint8_t mf[1]; +}; +#endif + +/** + * struct mpt2_ioctl_btdh_mapping - mapping info + * @hdr - generic header + * @id - target device identification number + * @bus - SCSI bus number that the target device exists on + * @handle - device handle for the target device + * @rsvd - reserved + * + * To obtain a bus/id the application sets + * handle to valid handle, and bus/id to 0xFFFF. + * + * To obtain the device handle the application sets + * bus/id valid value, and the handle to 0xFFFF. + */ +struct mpt2_ioctl_btdh_mapping { + struct mpt2_ioctl_header hdr; + uint32_t id; + uint32_t bus; + uint16_t handle; + uint16_t rsvd; +}; + + +/* status bits for ioc->diag_buffer_status */ +#define MPT2_DIAG_BUFFER_IS_REGISTERED (0x01) +#define MPT2_DIAG_BUFFER_IS_RELEASED (0x02) + +/* application flags for mpt2_diag_register, mpt2_diag_query */ +#define MPT2_APP_FLAGS_APP_OWNED (0x0001) +#define MPT2_APP_FLAGS_BUFFER_VALID (0x0002) +#define MPT2_APP_FLAGS_FW_BUFFER_ACCESS (0x0004) + +/* flags for mpt2_diag_read_buffer */ +#define MPT2_FLAGS_REREGISTER (0x0001) + +#define MPT2_PRODUCT_SPECIFIC_DWORDS 23 + +/** + * struct mpt2_diag_register - application register with driver + * @hdr - generic header + * @reserved - + * @buffer_type - specifies either TRACE or SNAPSHOT + * @application_flags - misc flags + * @diagnostic_flags - specifies flags affecting command processing + * @product_specific - product specific information + * @requested_buffer_size - buffers size in bytes + * @unique_id - tag specified by application that is used to signal ownership + * of the buffer. + * + * This will allow the driver to setup any required buffers that will be + * needed by firmware to communicate with the driver. + */ +struct mpt2_diag_register { + struct mpt2_ioctl_header hdr; + uint8_t reserved; + uint8_t buffer_type; + uint16_t application_flags; + uint32_t diagnostic_flags; + uint32_t product_specific[MPT2_PRODUCT_SPECIFIC_DWORDS]; + uint32_t requested_buffer_size; + uint32_t unique_id; +}; + +/** + * struct mpt2_diag_unregister - application unregister with driver + * @hdr - generic header + * @unique_id - tag uniquely identifies the buffer to be unregistered + * + * This will allow the driver to cleanup any memory allocated for diag + * messages and to free up any resources. + */ +struct mpt2_diag_unregister { + struct mpt2_ioctl_header hdr; + uint32_t unique_id; +}; + +/** + * struct mpt2_diag_query - query relevant info associated with diag buffers + * @hdr - generic header + * @reserved - + * @buffer_type - specifies either TRACE or SNAPSHOT + * @application_flags - misc flags + * @diagnostic_flags - specifies flags affecting command processing + * @product_specific - product specific information + * @total_buffer_size - diag buffer size in bytes + * @driver_added_buffer_size - size of extra space appended to end of buffer + * @unique_id - unique id associated with this buffer. + * + * The application will send only buffer_type and unique_id. Driver will + * inspect unique_id first, if valid, fill in all the info. If unique_id is + * 0x00, the driver will return info specified by Buffer Type. + */ +struct mpt2_diag_query { + struct mpt2_ioctl_header hdr; + uint8_t reserved; + uint8_t buffer_type; + uint16_t application_flags; + uint32_t diagnostic_flags; + uint32_t product_specific[MPT2_PRODUCT_SPECIFIC_DWORDS]; + uint32_t total_buffer_size; + uint32_t driver_added_buffer_size; + uint32_t unique_id; +}; + +/** + * struct mpt2_diag_release - request to send Diag Release Message to firmware + * @hdr - generic header + * @unique_id - tag uniquely identifies the buffer to be released + * + * This allows ownership of the specified buffer to returned to the driver, + * allowing an application to read the buffer without fear that firmware is + * overwritting information in the buffer. + */ +struct mpt2_diag_release { + struct mpt2_ioctl_header hdr; + uint32_t unique_id; +}; + +/** + * struct mpt2_diag_read_buffer - request for copy of the diag buffer + * @hdr - generic header + * @status - + * @reserved - + * @flags - misc flags + * @starting_offset - starting offset within drivers buffer where to start + * reading data at into the specified application buffer + * @bytes_to_read - number of bytes to copy from the drivers buffer into the + * application buffer starting at starting_offset. + * @unique_id - unique id associated with this buffer. + * @diagnostic_data - data payload + */ +struct mpt2_diag_read_buffer { + struct mpt2_ioctl_header hdr; + uint8_t status; + uint8_t reserved; + uint16_t flags; + uint32_t starting_offset; + uint32_t bytes_to_read; + uint32_t unique_id; + uint32_t diagnostic_data[1]; +}; + +#endif /* MPT2SAS_CTL_H_INCLUDED */ diff --git a/drivers/scsi/mpt2sas/mpt2sas_debug.h b/drivers/scsi/mpt2sas/mpt2sas_debug.h new file mode 100644 index 00000000000..ad325096e84 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpt2sas_debug.h @@ -0,0 +1,181 @@ +/* + * Logging Support for MPT (Message Passing Technology) based controllers + * + * This code is based on drivers/scsi/mpt2sas/mpt2_debug.c + * Copyright (C) 2007-2008 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#ifndef MPT2SAS_DEBUG_H_INCLUDED +#define MPT2SAS_DEBUG_H_INCLUDED + +#define MPT_DEBUG 0x00000001 +#define MPT_DEBUG_MSG_FRAME 0x00000002 +#define MPT_DEBUG_SG 0x00000004 +#define MPT_DEBUG_EVENTS 0x00000008 +#define MPT_DEBUG_EVENT_WORK_TASK 0x00000010 +#define MPT_DEBUG_INIT 0x00000020 +#define MPT_DEBUG_EXIT 0x00000040 +#define MPT_DEBUG_FAIL 0x00000080 +#define MPT_DEBUG_TM 0x00000100 +#define MPT_DEBUG_REPLY 0x00000200 +#define MPT_DEBUG_HANDSHAKE 0x00000400 +#define MPT_DEBUG_CONFIG 0x00000800 +#define MPT_DEBUG_DL 0x00001000 +#define MPT_DEBUG_RESET 0x00002000 +#define MPT_DEBUG_SCSI 0x00004000 +#define MPT_DEBUG_IOCTL 0x00008000 +#define MPT_DEBUG_CSMISAS 0x00010000 +#define MPT_DEBUG_SAS 0x00020000 +#define MPT_DEBUG_TRANSPORT 0x00040000 +#define MPT_DEBUG_TASK_SET_FULL 0x00080000 + +#define MPT_DEBUG_TARGET_MODE 0x00100000 + + +/* + * CONFIG_SCSI_MPT2SAS_LOGGING - enabled in Kconfig + */ + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +#define MPT_CHECK_LOGGING(IOC, CMD, BITS) \ +{ \ + if (IOC->logging_level & BITS) \ + CMD; \ +} +#else +#define MPT_CHECK_LOGGING(IOC, CMD, BITS) +#endif /* CONFIG_SCSI_MPT2SAS_LOGGING */ + + +/* + * debug macros + */ + +#define dprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG) + +#define dsgprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SG) + +#define devtprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EVENTS) + +#define dewtprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EVENT_WORK_TASK) + +#define dinitprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_INIT) + +#define dexitprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_EXIT) + +#define dfailprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_FAIL) + +#define dtmprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TM) + +#define dreplyprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_REPLY) + +#define dhsprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_HANDSHAKE) + +#define dcprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_CONFIG) + +#define ddlprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_DL) + +#define drsprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_RESET) + +#define dsprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SCSI) + +#define dctlprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_IOCTL) + +#define dcsmisasprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_CSMISAS) + +#define dsasprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS) + +#define dsastransport(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS_WIDE) + +#define dmfprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_MSG_FRAME) + +#define dtsfprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TASK_SET_FULL) + +#define dtransportprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TRANSPORT) + +#define dTMprintk(IOC, CMD) \ + MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_TARGET_MODE) + +/* inline functions for dumping debug data*/ +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _debug_dump_mf - print message frame contents + * @mpi_request: pointer to message frame + * @sz: number of dwords + */ +static inline void +_debug_dump_mf(void *mpi_request, int sz) +{ + int i; + u32 *mfp = (u32 *)mpi_request; + + printk(KERN_INFO "mf:\n\t"); + for (i = 0; i < sz; i++) { + if (i && ((i % 8) == 0)) + printk("\n\t"); + printk("%08x ", le32_to_cpu(mfp[i])); + } + printk("\n"); +} +#else +#define _debug_dump_mf(mpi_request, sz) +#endif /* CONFIG_SCSI_MPT2SAS_LOGGING */ + +#endif /* MPT2SAS_DEBUG_H_INCLUDED */ diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c new file mode 100644 index 00000000000..0c463c483c0 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -0,0 +1,5687 @@ +/* + * Scsi Host Layer for MPT (Message Passing Technology) based controllers + * + * This code is based on drivers/scsi/mpt2sas/mpt2_scsih.c + * Copyright (C) 2007-2008 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/blkdev.h> +#include <linux/sched.h> +#include <linux/workqueue.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/interrupt.h> + +#include "mpt2sas_base.h" + +MODULE_AUTHOR(MPT2SAS_AUTHOR); +MODULE_DESCRIPTION(MPT2SAS_DESCRIPTION); +MODULE_LICENSE("GPL"); +MODULE_VERSION(MPT2SAS_DRIVER_VERSION); + +#define RAID_CHANNEL 1 + +/* forward proto's */ +static void _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc, + struct _sas_node *sas_expander); +static void _firmware_event_work(struct work_struct *work); + +/* global parameters */ +LIST_HEAD(mpt2sas_ioc_list); + +/* local parameters */ +static u8 scsi_io_cb_idx = -1; +static u8 tm_cb_idx = -1; +static u8 ctl_cb_idx = -1; +static u8 base_cb_idx = -1; +static u8 transport_cb_idx = -1; +static u8 config_cb_idx = -1; +static int mpt_ids; + +/* command line options */ +static u32 logging_level; +MODULE_PARM_DESC(logging_level, " bits for enabling additional logging info " + "(default=0)"); + +/* scsi-mid layer global parmeter is max_report_luns, which is 511 */ +#define MPT2SAS_MAX_LUN (16895) +static int max_lun = MPT2SAS_MAX_LUN; +module_param(max_lun, int, 0); +MODULE_PARM_DESC(max_lun, " max lun, default=16895 "); + +/** + * struct sense_info - common structure for obtaining sense keys + * @skey: sense key + * @asc: additional sense code + * @ascq: additional sense code qualifier + */ +struct sense_info { + u8 skey; + u8 asc; + u8 ascq; +}; + + +#define MPT2SAS_RESCAN_AFTER_HOST_RESET (0xFFFF) +/** + * struct fw_event_work - firmware event struct + * @list: link list framework + * @work: work object (ioc->fault_reset_work_q) + * @ioc: per adapter object + * @VF_ID: virtual function id + * @host_reset_handling: handling events during host reset + * @ignore: flag meaning this event has been marked to ignore + * @event: firmware event MPI2_EVENT_XXX defined in mpt2_ioc.h + * @event_data: reply event data payload follows + * + * This object stored on ioc->fw_event_list. + */ +struct fw_event_work { + struct list_head list; + struct delayed_work work; + struct MPT2SAS_ADAPTER *ioc; + u8 VF_ID; + u8 host_reset_handling; + u8 ignore; + u16 event; + void *event_data; +}; + +/** + * struct _scsi_io_transfer - scsi io transfer + * @handle: sas device handle (assigned by firmware) + * @is_raid: flag set for hidden raid components + * @dir: DMA_TO_DEVICE, DMA_FROM_DEVICE, + * @data_length: data transfer length + * @data_dma: dma pointer to data + * @sense: sense data + * @lun: lun number + * @cdb_length: cdb length + * @cdb: cdb contents + * @valid_reply: flag set for reply message + * @timeout: timeout for this command + * @sense_length: sense length + * @ioc_status: ioc status + * @scsi_state: scsi state + * @scsi_status: scsi staus + * @log_info: log information + * @transfer_length: data length transfer when there is a reply message + * + * Used for sending internal scsi commands to devices within this module. + * Refer to _scsi_send_scsi_io(). + */ +struct _scsi_io_transfer { + u16 handle; + u8 is_raid; + enum dma_data_direction dir; + u32 data_length; + dma_addr_t data_dma; + u8 sense[SCSI_SENSE_BUFFERSIZE]; + u32 lun; + u8 cdb_length; + u8 cdb[32]; + u8 timeout; + u8 valid_reply; + /* the following bits are only valid when 'valid_reply = 1' */ + u32 sense_length; + u16 ioc_status; + u8 scsi_state; + u8 scsi_status; + u32 log_info; + u32 transfer_length; +}; + +/* + * The pci device ids are defined in mpi/mpi2_cnfg.h. + */ +static struct pci_device_id scsih_pci_table[] = { + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2004, + PCI_ANY_ID, PCI_ANY_ID }, + /* Falcon ~ 2008*/ + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2008, + PCI_ANY_ID, PCI_ANY_ID }, + /* Liberator ~ 2108 */ + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_1, + PCI_ANY_ID, PCI_ANY_ID }, + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_2, + PCI_ANY_ID, PCI_ANY_ID }, + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_3, + PCI_ANY_ID, PCI_ANY_ID }, + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_1, + PCI_ANY_ID, PCI_ANY_ID }, + { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_2, + PCI_ANY_ID, PCI_ANY_ID }, + {0} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(pci, scsih_pci_table); + +/** + * scsih_set_debug_level - global setting of ioc->logging_level. + * + * Note: The logging levels are defined in mpt2sas_debug.h. + */ +static int +scsih_set_debug_level(const char *val, struct kernel_param *kp) +{ + int ret = param_set_int(val, kp); + struct MPT2SAS_ADAPTER *ioc; + + if (ret) + return ret; + + printk(KERN_INFO "setting logging_level(0x%08x)\n", logging_level); + list_for_each_entry(ioc, &mpt2sas_ioc_list, list) + ioc->logging_level = logging_level; + return 0; +} +module_param_call(logging_level, scsih_set_debug_level, param_get_int, + &logging_level, 0644); + +/** + * _scsih_srch_boot_sas_address - search based on sas_address + * @sas_address: sas address + * @boot_device: boot device object from bios page 2 + * + * Returns 1 when there's a match, 0 means no match. + */ +static inline int +_scsih_srch_boot_sas_address(u64 sas_address, + Mpi2BootDeviceSasWwid_t *boot_device) +{ + return (sas_address == le64_to_cpu(boot_device->SASAddress)) ? 1 : 0; +} + +/** + * _scsih_srch_boot_device_name - search based on device name + * @device_name: device name specified in INDENTIFY fram + * @boot_device: boot device object from bios page 2 + * + * Returns 1 when there's a match, 0 means no match. + */ +static inline int +_scsih_srch_boot_device_name(u64 device_name, + Mpi2BootDeviceDeviceName_t *boot_device) +{ + return (device_name == le64_to_cpu(boot_device->DeviceName)) ? 1 : 0; +} + +/** + * _scsih_srch_boot_encl_slot - search based on enclosure_logical_id/slot + * @enclosure_logical_id: enclosure logical id + * @slot_number: slot number + * @boot_device: boot device object from bios page 2 + * + * Returns 1 when there's a match, 0 means no match. + */ +static inline int +_scsih_srch_boot_encl_slot(u64 enclosure_logical_id, u16 slot_number, + Mpi2BootDeviceEnclosureSlot_t *boot_device) +{ + return (enclosure_logical_id == le64_to_cpu(boot_device-> + EnclosureLogicalID) && slot_number == le16_to_cpu(boot_device-> + SlotNumber)) ? 1 : 0; +} + +/** + * _scsih_is_boot_device - search for matching boot device. + * @sas_address: sas address + * @device_name: device name specified in INDENTIFY fram + * @enclosure_logical_id: enclosure logical id + * @slot_number: slot number + * @form: specifies boot device form + * @boot_device: boot device object from bios page 2 + * + * Returns 1 when there's a match, 0 means no match. + */ +static int +_scsih_is_boot_device(u64 sas_address, u64 device_name, + u64 enclosure_logical_id, u16 slot, u8 form, + Mpi2BiosPage2BootDevice_t *boot_device) +{ + int rc = 0; + + switch (form) { + case MPI2_BIOSPAGE2_FORM_SAS_WWID: + if (!sas_address) + break; + rc = _scsih_srch_boot_sas_address( + sas_address, &boot_device->SasWwid); + break; + case MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT: + if (!enclosure_logical_id) + break; + rc = _scsih_srch_boot_encl_slot( + enclosure_logical_id, + slot, &boot_device->EnclosureSlot); + break; + case MPI2_BIOSPAGE2_FORM_DEVICE_NAME: + if (!device_name) + break; + rc = _scsih_srch_boot_device_name( + device_name, &boot_device->DeviceName); + break; + case MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED: + break; + } + + return rc; +} + +/** + * _scsih_determine_boot_device - determine boot device. + * @ioc: per adapter object + * @device: either sas_device or raid_device object + * @is_raid: [flag] 1 = raid object, 0 = sas object + * + * Determines whether this device should be first reported device to + * to scsi-ml or sas transport, this purpose is for persistant boot device. + * There are primary, alternate, and current entries in bios page 2. The order + * priority is primary, alternate, then current. This routine saves + * the corresponding device object and is_raid flag in the ioc object. + * The saved data to be used later in _scsih_probe_boot_devices(). + */ +static void +_scsih_determine_boot_device(struct MPT2SAS_ADAPTER *ioc, + void *device, u8 is_raid) +{ + struct _sas_device *sas_device; + struct _raid_device *raid_device; + u64 sas_address; + u64 device_name; + u64 enclosure_logical_id; + u16 slot; + + /* only process this function when driver loads */ + if (!ioc->wait_for_port_enable_to_complete) + return; + + if (!is_raid) { + sas_device = device; + sas_address = sas_device->sas_address; + device_name = sas_device->device_name; + enclosure_logical_id = sas_device->enclosure_logical_id; + slot = sas_device->slot; + } else { + raid_device = device; + sas_address = raid_device->wwid; + device_name = 0; + enclosure_logical_id = 0; + slot = 0; + } + + if (!ioc->req_boot_device.device) { + if (_scsih_is_boot_device(sas_address, device_name, + enclosure_logical_id, slot, + (ioc->bios_pg2.ReqBootDeviceForm & + MPI2_BIOSPAGE2_FORM_MASK), + &ioc->bios_pg2.RequestedBootDevice)) { + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "%s: req_boot_device(0x%016llx)\n", + ioc->name, __func__, + (unsigned long long)sas_address)); + ioc->req_boot_device.device = device; + ioc->req_boot_device.is_raid = is_raid; + } + } + + if (!ioc->req_alt_boot_device.device) { + if (_scsih_is_boot_device(sas_address, device_name, + enclosure_logical_id, slot, + (ioc->bios_pg2.ReqAltBootDeviceForm & + MPI2_BIOSPAGE2_FORM_MASK), + &ioc->bios_pg2.RequestedAltBootDevice)) { + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "%s: req_alt_boot_device(0x%016llx)\n", + ioc->name, __func__, + (unsigned long long)sas_address)); + ioc->req_alt_boot_device.device = device; + ioc->req_alt_boot_device.is_raid = is_raid; + } + } + + if (!ioc->current_boot_device.device) { + if (_scsih_is_boot_device(sas_address, device_name, + enclosure_logical_id, slot, + (ioc->bios_pg2.CurrentBootDeviceForm & + MPI2_BIOSPAGE2_FORM_MASK), + &ioc->bios_pg2.CurrentBootDevice)) { + dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "%s: current_boot_device(0x%016llx)\n", + ioc->name, __func__, + (unsigned long long)sas_address)); + ioc->current_boot_device.device = device; + ioc->current_boot_device.is_raid = is_raid; + } + } +} + +/** + * mpt2sas_scsih_sas_device_find_by_sas_address - sas device search + * @ioc: per adapter object + * @sas_address: sas address + * Context: Calling function should acquire ioc->sas_device_lock + * + * This searches for sas_device based on sas_address, then return sas_device + * object. + */ +struct _sas_device * +mpt2sas_scsih_sas_device_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc, + u64 sas_address) +{ + struct _sas_device *sas_device, *r; + + r = NULL; + /* check the sas_device_init_list */ + list_for_each_entry(sas_device, &ioc->sas_device_init_list, + list) { + if (sas_device->sas_address != sas_address) + continue; + r = sas_device; + goto out; + } + + /* then check the sas_device_list */ + list_for_each_entry(sas_device, &ioc->sas_device_list, list) { + if (sas_device->sas_address != sas_address) + continue; + r = sas_device; + goto out; + } + out: + return r; +} + +/** + * _scsih_sas_device_find_by_handle - sas device search + * @ioc: per adapter object + * @handle: sas device handle (assigned by firmware) + * Context: Calling function should acquire ioc->sas_device_lock + * + * This searches for sas_device based on sas_address, then return sas_device + * object. + */ +static struct _sas_device * +_scsih_sas_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct _sas_device *sas_device, *r; + + r = NULL; + if (ioc->wait_for_port_enable_to_complete) { + list_for_each_entry(sas_device, &ioc->sas_device_init_list, + list) { + if (sas_device->handle != handle) + continue; + r = sas_device; + goto out; + } + } else { + list_for_each_entry(sas_device, &ioc->sas_device_list, list) { + if (sas_device->handle != handle) + continue; + r = sas_device; + goto out; + } + } + + out: + return r; +} + +/** + * _scsih_sas_device_remove - remove sas_device from list. + * @ioc: per adapter object + * @sas_device: the sas_device object + * Context: This function will acquire ioc->sas_device_lock. + * + * Removing object and freeing associated memory from the ioc->sas_device_list. + */ +static void +_scsih_sas_device_remove(struct MPT2SAS_ADAPTER *ioc, + struct _sas_device *sas_device) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_del(&sas_device->list); + memset(sas_device, 0, sizeof(struct _sas_device)); + kfree(sas_device); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); +} + +/** + * _scsih_sas_device_add - insert sas_device to the list. + * @ioc: per adapter object + * @sas_device: the sas_device object + * Context: This function will acquire ioc->sas_device_lock. + * + * Adding new object to the ioc->sas_device_list. + */ +static void +_scsih_sas_device_add(struct MPT2SAS_ADAPTER *ioc, + struct _sas_device *sas_device) +{ + unsigned long flags; + u16 handle, parent_handle; + u64 sas_address; + + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle" + "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__, + sas_device->handle, (unsigned long long)sas_device->sas_address)); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_add_tail(&sas_device->list, &ioc->sas_device_list); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + handle = sas_device->handle; + parent_handle = sas_device->parent_handle; + sas_address = sas_device->sas_address; + if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) { + _scsih_sas_device_remove(ioc, sas_device); + } else if (!sas_device->starget) { + mpt2sas_transport_port_remove(ioc, sas_address, parent_handle); + _scsih_sas_device_remove(ioc, sas_device); + } +} + +/** + * _scsih_sas_device_init_add - insert sas_device to the list. + * @ioc: per adapter object + * @sas_device: the sas_device object + * Context: This function will acquire ioc->sas_device_lock. + * + * Adding new object at driver load time to the ioc->sas_device_init_list. + */ +static void +_scsih_sas_device_init_add(struct MPT2SAS_ADAPTER *ioc, + struct _sas_device *sas_device) +{ + unsigned long flags; + + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle" + "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__, + sas_device->handle, (unsigned long long)sas_device->sas_address)); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_add_tail(&sas_device->list, &ioc->sas_device_init_list); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + _scsih_determine_boot_device(ioc, sas_device, 0); +} + +/** + * mpt2sas_scsih_expander_find_by_handle - expander device search + * @ioc: per adapter object + * @handle: expander handle (assigned by firmware) + * Context: Calling function should acquire ioc->sas_device_lock + * + * This searches for expander device based on handle, then returns the + * sas_node object. + */ +struct _sas_node * +mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct _sas_node *sas_expander, *r; + + r = NULL; + list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) { + if (sas_expander->handle != handle) + continue; + r = sas_expander; + goto out; + } + out: + return r; +} + +/** + * _scsih_raid_device_find_by_id - raid device search + * @ioc: per adapter object + * @id: sas device target id + * @channel: sas device channel + * Context: Calling function should acquire ioc->raid_device_lock + * + * This searches for raid_device based on target id, then return raid_device + * object. + */ +static struct _raid_device * +_scsih_raid_device_find_by_id(struct MPT2SAS_ADAPTER *ioc, int id, int channel) +{ + struct _raid_device *raid_device, *r; + + r = NULL; + list_for_each_entry(raid_device, &ioc->raid_device_list, list) { + if (raid_device->id == id && raid_device->channel == channel) { + r = raid_device; + goto out; + } + } + + out: + return r; +} + +/** + * _scsih_raid_device_find_by_handle - raid device search + * @ioc: per adapter object + * @handle: sas device handle (assigned by firmware) + * Context: Calling function should acquire ioc->raid_device_lock + * + * This searches for raid_device based on handle, then return raid_device + * object. + */ +static struct _raid_device * +_scsih_raid_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct _raid_device *raid_device, *r; + + r = NULL; + list_for_each_entry(raid_device, &ioc->raid_device_list, list) { + if (raid_device->handle != handle) + continue; + r = raid_device; + goto out; + } + + out: + return r; +} + +/** + * _scsih_raid_device_find_by_wwid - raid device search + * @ioc: per adapter object + * @handle: sas device handle (assigned by firmware) + * Context: Calling function should acquire ioc->raid_device_lock + * + * This searches for raid_device based on wwid, then return raid_device + * object. + */ +static struct _raid_device * +_scsih_raid_device_find_by_wwid(struct MPT2SAS_ADAPTER *ioc, u64 wwid) +{ + struct _raid_device *raid_device, *r; + + r = NULL; + list_for_each_entry(raid_device, &ioc->raid_device_list, list) { + if (raid_device->wwid != wwid) + continue; + r = raid_device; + goto out; + } + + out: + return r; +} + +/** + * _scsih_raid_device_add - add raid_device object + * @ioc: per adapter object + * @raid_device: raid_device object + * + * This is added to the raid_device_list link list. + */ +static void +_scsih_raid_device_add(struct MPT2SAS_ADAPTER *ioc, + struct _raid_device *raid_device) +{ + unsigned long flags; + + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle" + "(0x%04x), wwid(0x%016llx)\n", ioc->name, __func__, + raid_device->handle, (unsigned long long)raid_device->wwid)); + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + list_add_tail(&raid_device->list, &ioc->raid_device_list); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); +} + +/** + * _scsih_raid_device_remove - delete raid_device object + * @ioc: per adapter object + * @raid_device: raid_device object + * + * This is removed from the raid_device_list link list. + */ +static void +_scsih_raid_device_remove(struct MPT2SAS_ADAPTER *ioc, + struct _raid_device *raid_device) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + list_del(&raid_device->list); + memset(raid_device, 0, sizeof(struct _raid_device)); + kfree(raid_device); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); +} + +/** + * mpt2sas_scsih_expander_find_by_sas_address - expander device search + * @ioc: per adapter object + * @sas_address: sas address + * Context: Calling function should acquire ioc->sas_node_lock. + * + * This searches for expander device based on sas_address, then returns the + * sas_node object. + */ +struct _sas_node * +mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc, + u64 sas_address) +{ + struct _sas_node *sas_expander, *r; + + r = NULL; + list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) { + if (sas_expander->sas_address != sas_address) + continue; + r = sas_expander; + goto out; + } + out: + return r; +} + +/** + * _scsih_expander_node_add - insert expander device to the list. + * @ioc: per adapter object + * @sas_expander: the sas_device object + * Context: This function will acquire ioc->sas_node_lock. + * + * Adding new object to the ioc->sas_expander_list. + * + * Return nothing. + */ +static void +_scsih_expander_node_add(struct MPT2SAS_ADAPTER *ioc, + struct _sas_node *sas_expander) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + list_add_tail(&sas_expander->list, &ioc->sas_expander_list); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); +} + +/** + * _scsih_is_end_device - determines if device is an end device + * @device_info: bitfield providing information about the device. + * Context: none + * + * Returns 1 if end device. + */ +static int +_scsih_is_end_device(u32 device_info) +{ + if (device_info & MPI2_SAS_DEVICE_INFO_END_DEVICE && + ((device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) | + (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) | + (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE))) + return 1; + else + return 0; +} + +/** + * _scsih_scsi_lookup_get - returns scmd entry + * @ioc: per adapter object + * @smid: system request message index + * Context: This function will acquire ioc->scsi_lookup_lock. + * + * Returns the smid stored scmd pointer. + */ +static struct scsi_cmnd * +_scsih_scsi_lookup_get(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + unsigned long flags; + struct scsi_cmnd *scmd; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + scmd = ioc->scsi_lookup[smid - 1].scmd; + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return scmd; +} + +/** + * mptscsih_getclear_scsi_lookup - returns scmd entry + * @ioc: per adapter object + * @smid: system request message index + * Context: This function will acquire ioc->scsi_lookup_lock. + * + * Returns the smid stored scmd pointer, as well as clearing the scmd pointer. + */ +static struct scsi_cmnd * +_scsih_scsi_lookup_getclear(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + unsigned long flags; + struct scsi_cmnd *scmd; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + scmd = ioc->scsi_lookup[smid - 1].scmd; + ioc->scsi_lookup[smid - 1].scmd = NULL; + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return scmd; +} + +/** + * _scsih_scsi_lookup_set - updates scmd entry in lookup + * @ioc: per adapter object + * @smid: system request message index + * @scmd: pointer to scsi command object + * Context: This function will acquire ioc->scsi_lookup_lock. + * + * This will save scmd pointer in the scsi_lookup array. + * + * Return nothing. + */ +static void +_scsih_scsi_lookup_set(struct MPT2SAS_ADAPTER *ioc, u16 smid, + struct scsi_cmnd *scmd) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + ioc->scsi_lookup[smid - 1].scmd = scmd; + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); +} + +/** + * _scsih_scsi_lookup_find_by_scmd - scmd lookup + * @ioc: per adapter object + * @smid: system request message index + * @scmd: pointer to scsi command object + * Context: This function will acquire ioc->scsi_lookup_lock. + * + * This will search for a scmd pointer in the scsi_lookup array, + * returning the revelent smid. A returned value of zero means invalid. + */ +static u16 +_scsih_scsi_lookup_find_by_scmd(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd + *scmd) +{ + u16 smid; + unsigned long flags; + int i; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + smid = 0; + for (i = 0; i < ioc->request_depth; i++) { + if (ioc->scsi_lookup[i].scmd == scmd) { + smid = i + 1; + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return smid; +} + +/** + * _scsih_scsi_lookup_find_by_target - search for matching channel:id + * @ioc: per adapter object + * @id: target id + * @channel: channel + * Context: This function will acquire ioc->scsi_lookup_lock. + * + * This will search for a matching channel:id in the scsi_lookup array, + * returning 1 if found. + */ +static u8 +_scsih_scsi_lookup_find_by_target(struct MPT2SAS_ADAPTER *ioc, int id, + int channel) +{ + u8 found; + unsigned long flags; + int i; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + found = 0; + for (i = 0 ; i < ioc->request_depth; i++) { + if (ioc->scsi_lookup[i].scmd && + (ioc->scsi_lookup[i].scmd->device->id == id && + ioc->scsi_lookup[i].scmd->device->channel == channel)) { + found = 1; + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + return found; +} + +/** + * _scsih_get_chain_buffer_dma - obtain block of chains (dma address) + * @ioc: per adapter object + * @smid: system request message index + * + * Returns phys pointer to chain buffer. + */ +static dma_addr_t +_scsih_get_chain_buffer_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + return ioc->chain_dma + ((smid - 1) * (ioc->request_sz * + ioc->chains_needed_per_io)); +} + +/** + * _scsih_get_chain_buffer - obtain block of chains assigned to a mf request + * @ioc: per adapter object + * @smid: system request message index + * + * Returns virt pointer to chain buffer. + */ +static void * +_scsih_get_chain_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + return (void *)(ioc->chain + ((smid - 1) * (ioc->request_sz * + ioc->chains_needed_per_io))); +} + +/** + * _scsih_build_scatter_gather - main sg creation routine + * @ioc: per adapter object + * @scmd: scsi command + * @smid: system request message index + * Context: none. + * + * The main routine that builds scatter gather table from a given + * scsi request sent via the .queuecommand main handler. + * + * Returns 0 success, anything else error + */ +static int +_scsih_build_scatter_gather(struct MPT2SAS_ADAPTER *ioc, + struct scsi_cmnd *scmd, u16 smid) +{ + Mpi2SCSIIORequest_t *mpi_request; + dma_addr_t chain_dma; + struct scatterlist *sg_scmd; + void *sg_local, *chain; + u32 chain_offset; + u32 chain_length; + u32 chain_flags; + u32 sges_left; + u32 sges_in_segment; + u32 sgl_flags; + u32 sgl_flags_last_element; + u32 sgl_flags_end_buffer; + + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + + /* init scatter gather flags */ + sgl_flags = MPI2_SGE_FLAGS_SIMPLE_ELEMENT; + if (scmd->sc_data_direction == DMA_TO_DEVICE) + sgl_flags |= MPI2_SGE_FLAGS_HOST_TO_IOC; + sgl_flags_last_element = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT) + << MPI2_SGE_FLAGS_SHIFT; + sgl_flags_end_buffer = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT | + MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST) + << MPI2_SGE_FLAGS_SHIFT; + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + + sg_scmd = scsi_sglist(scmd); + sges_left = scsi_dma_map(scmd); + if (!sges_left) { + sdev_printk(KERN_ERR, scmd->device, "pci_map_sg" + " failed: request for %d bytes!\n", scsi_bufflen(scmd)); + return -ENOMEM; + } + + sg_local = &mpi_request->SGL; + sges_in_segment = ioc->max_sges_in_main_message; + if (sges_left <= sges_in_segment) + goto fill_in_last_segment; + + mpi_request->ChainOffset = (offsetof(Mpi2SCSIIORequest_t, SGL) + + (sges_in_segment * ioc->sge_size))/4; + + /* fill in main message segment when there is a chain following */ + while (sges_in_segment) { + if (sges_in_segment == 1) + ioc->base_add_sg_single(sg_local, + sgl_flags_last_element | sg_dma_len(sg_scmd), + sg_dma_address(sg_scmd)); + else + ioc->base_add_sg_single(sg_local, sgl_flags | + sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); + sg_scmd = sg_next(sg_scmd); + sg_local += ioc->sge_size; + sges_left--; + sges_in_segment--; + } + + /* initializing the chain flags and pointers */ + chain_flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT << MPI2_SGE_FLAGS_SHIFT; + chain = _scsih_get_chain_buffer(ioc, smid); + chain_dma = _scsih_get_chain_buffer_dma(ioc, smid); + do { + sges_in_segment = (sges_left <= + ioc->max_sges_in_chain_message) ? sges_left : + ioc->max_sges_in_chain_message; + chain_offset = (sges_left == sges_in_segment) ? + 0 : (sges_in_segment * ioc->sge_size)/4; + chain_length = sges_in_segment * ioc->sge_size; + if (chain_offset) { + chain_offset = chain_offset << + MPI2_SGE_CHAIN_OFFSET_SHIFT; + chain_length += ioc->sge_size; + } + ioc->base_add_sg_single(sg_local, chain_flags | chain_offset | + chain_length, chain_dma); + sg_local = chain; + if (!chain_offset) + goto fill_in_last_segment; + + /* fill in chain segments */ + while (sges_in_segment) { + if (sges_in_segment == 1) + ioc->base_add_sg_single(sg_local, + sgl_flags_last_element | + sg_dma_len(sg_scmd), + sg_dma_address(sg_scmd)); + else + ioc->base_add_sg_single(sg_local, sgl_flags | + sg_dma_len(sg_scmd), + sg_dma_address(sg_scmd)); + sg_scmd = sg_next(sg_scmd); + sg_local += ioc->sge_size; + sges_left--; + sges_in_segment--; + } + + chain_dma += ioc->request_sz; + chain += ioc->request_sz; + } while (1); + + + fill_in_last_segment: + + /* fill the last segment */ + while (sges_left) { + if (sges_left == 1) + ioc->base_add_sg_single(sg_local, sgl_flags_end_buffer | + sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); + else + ioc->base_add_sg_single(sg_local, sgl_flags | + sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); + sg_scmd = sg_next(sg_scmd); + sg_local += ioc->sge_size; + sges_left--; + } + + return 0; +} + +/** + * scsih_change_queue_depth - setting device queue depth + * @sdev: scsi device struct + * @qdepth: requested queue depth + * + * Returns queue depth. + */ +static int +scsih_change_queue_depth(struct scsi_device *sdev, int qdepth) +{ + struct Scsi_Host *shost = sdev->host; + int max_depth; + int tag_type; + + max_depth = shost->can_queue; + if (!sdev->tagged_supported) + max_depth = 1; + if (qdepth > max_depth) + qdepth = max_depth; + tag_type = (qdepth == 1) ? 0 : MSG_SIMPLE_TAG; + scsi_adjust_queue_depth(sdev, tag_type, qdepth); + + if (sdev->inquiry_len > 7) + sdev_printk(KERN_INFO, sdev, "qdepth(%d), tagged(%d), " + "simple(%d), ordered(%d), scsi_level(%d), cmd_que(%d)\n", + sdev->queue_depth, sdev->tagged_supported, sdev->simple_tags, + sdev->ordered_tags, sdev->scsi_level, + (sdev->inquiry[7] & 2) >> 1); + + return sdev->queue_depth; +} + +/** + * scsih_change_queue_depth - changing device queue tag type + * @sdev: scsi device struct + * @tag_type: requested tag type + * + * Returns queue tag type. + */ +static int +scsih_change_queue_type(struct scsi_device *sdev, int tag_type) +{ + if (sdev->tagged_supported) { + scsi_set_tag_type(sdev, tag_type); + if (tag_type) + scsi_activate_tcq(sdev, sdev->queue_depth); + else + scsi_deactivate_tcq(sdev, sdev->queue_depth); + } else + tag_type = 0; + + return tag_type; +} + +/** + * scsih_target_alloc - target add routine + * @starget: scsi target struct + * + * Returns 0 if ok. Any other return is assumed to be an error and + * the device is ignored. + */ +static int +scsih_target_alloc(struct scsi_target *starget) +{ + struct Scsi_Host *shost = dev_to_shost(&starget->dev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + struct MPT2SAS_TARGET *sas_target_priv_data; + struct _sas_device *sas_device; + struct _raid_device *raid_device; + unsigned long flags; + struct sas_rphy *rphy; + + sas_target_priv_data = kzalloc(sizeof(struct scsi_target), GFP_KERNEL); + if (!sas_target_priv_data) + return -ENOMEM; + + starget->hostdata = sas_target_priv_data; + sas_target_priv_data->starget = starget; + sas_target_priv_data->handle = MPT2SAS_INVALID_DEVICE_HANDLE; + + /* RAID volumes */ + if (starget->channel == RAID_CHANNEL) { + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_id(ioc, starget->id, + starget->channel); + if (raid_device) { + sas_target_priv_data->handle = raid_device->handle; + sas_target_priv_data->sas_address = raid_device->wwid; + sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME; + raid_device->starget = starget; + } + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + return 0; + } + + /* sas/sata devices */ + spin_lock_irqsave(&ioc->sas_device_lock, flags); + rphy = dev_to_rphy(starget->dev.parent); + sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + rphy->identify.sas_address); + + if (sas_device) { + sas_target_priv_data->handle = sas_device->handle; + sas_target_priv_data->sas_address = sas_device->sas_address; + sas_device->starget = starget; + sas_device->id = starget->id; + sas_device->channel = starget->channel; + if (sas_device->hidden_raid_component) + sas_target_priv_data->flags |= + MPT_TARGET_FLAGS_RAID_COMPONENT; + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + return 0; +} + +/** + * scsih_target_destroy - target destroy routine + * @starget: scsi target struct + * + * Returns nothing. + */ +static void +scsih_target_destroy(struct scsi_target *starget) +{ + struct Scsi_Host *shost = dev_to_shost(&starget->dev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + struct MPT2SAS_TARGET *sas_target_priv_data; + struct _sas_device *sas_device; + struct _raid_device *raid_device; + unsigned long flags; + struct sas_rphy *rphy; + + sas_target_priv_data = starget->hostdata; + if (!sas_target_priv_data) + return; + + if (starget->channel == RAID_CHANNEL) { + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_id(ioc, starget->id, + starget->channel); + if (raid_device) { + raid_device->starget = NULL; + raid_device->sdev = NULL; + } + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + goto out; + } + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + rphy = dev_to_rphy(starget->dev.parent); + sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + rphy->identify.sas_address); + if (sas_device) + sas_device->starget = NULL; + + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + out: + kfree(sas_target_priv_data); + starget->hostdata = NULL; +} + +/** + * scsih_slave_alloc - device add routine + * @sdev: scsi device struct + * + * Returns 0 if ok. Any other return is assumed to be an error and + * the device is ignored. + */ +static int +scsih_slave_alloc(struct scsi_device *sdev) +{ + struct Scsi_Host *shost; + struct MPT2SAS_ADAPTER *ioc; + struct MPT2SAS_TARGET *sas_target_priv_data; + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct scsi_target *starget; + struct _raid_device *raid_device; + struct _sas_device *sas_device; + unsigned long flags; + + sas_device_priv_data = kzalloc(sizeof(struct scsi_device), GFP_KERNEL); + if (!sas_device_priv_data) + return -ENOMEM; + + sas_device_priv_data->lun = sdev->lun; + sas_device_priv_data->flags = MPT_DEVICE_FLAGS_INIT; + + starget = scsi_target(sdev); + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->num_luns++; + sas_device_priv_data->sas_target = sas_target_priv_data; + sdev->hostdata = sas_device_priv_data; + if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT)) + sdev->no_uld_attach = 1; + + shost = dev_to_shost(&starget->dev); + ioc = shost_priv(shost); + if (starget->channel == RAID_CHANNEL) { + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_id(ioc, + starget->id, starget->channel); + if (raid_device) + raid_device->sdev = sdev; /* raid is single lun */ + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + } else { + /* set TLR bit for SSP devices */ + if (!(ioc->facts.IOCCapabilities & + MPI2_IOCFACTS_CAPABILITY_TLR)) + goto out; + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + sas_device_priv_data->sas_target->sas_address); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (sas_device && sas_device->device_info & + MPI2_SAS_DEVICE_INFO_SSP_TARGET) + sas_device_priv_data->flags |= MPT_DEVICE_TLR_ON; + } + + out: + return 0; +} + +/** + * scsih_slave_destroy - device destroy routine + * @sdev: scsi device struct + * + * Returns nothing. + */ +static void +scsih_slave_destroy(struct scsi_device *sdev) +{ + struct MPT2SAS_TARGET *sas_target_priv_data; + struct scsi_target *starget; + + if (!sdev->hostdata) + return; + + starget = scsi_target(sdev); + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->num_luns--; + kfree(sdev->hostdata); + sdev->hostdata = NULL; +} + +/** + * scsih_display_sata_capabilities - sata capabilities + * @ioc: per adapter object + * @sas_device: the sas_device object + * @sdev: scsi device struct + */ +static void +scsih_display_sata_capabilities(struct MPT2SAS_ADAPTER *ioc, + struct _sas_device *sas_device, struct scsi_device *sdev) +{ + Mpi2ConfigReply_t mpi_reply; + Mpi2SasDevicePage0_t sas_device_pg0; + u32 ioc_status; + u16 flags; + u32 device_info; + + if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, + MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, sas_device->handle))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + flags = le16_to_cpu(sas_device_pg0.Flags); + device_info = le16_to_cpu(sas_device_pg0.DeviceInfo); + + sdev_printk(KERN_INFO, sdev, + "atapi(%s), ncq(%s), asyn_notify(%s), smart(%s), fua(%s), " + "sw_preserve(%s)\n", + (device_info & MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE) ? "y" : "n", + (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED) ? "y" : "n", + (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY) ? "y" : + "n", + (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED) ? "y" : "n", + (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED) ? "y" : "n", + (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE) ? "y" : "n"); +} + +/** + * _scsih_get_volume_capabilities - volume capabilities + * @ioc: per adapter object + * @sas_device: the raid_device object + */ +static void +_scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc, + struct _raid_device *raid_device) +{ + Mpi2RaidVolPage0_t *vol_pg0; + Mpi2RaidPhysDiskPage0_t pd_pg0; + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2ConfigReply_t mpi_reply; + u16 sz; + u8 num_pds; + + if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle, + &num_pds)) || !num_pds) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + raid_device->num_pds = num_pds; + sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds * + sizeof(Mpi2RaidVol0PhysDisk_t)); + vol_pg0 = kzalloc(sz, GFP_KERNEL); + if (!vol_pg0) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0, + MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + kfree(vol_pg0); + return; + } + + raid_device->volume_type = vol_pg0->VolumeType; + + /* figure out what the underlying devices are by + * obtaining the device_info bits for the 1st device + */ + if (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply, + &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM, + vol_pg0->PhysDisk[0].PhysDiskNum))) { + if (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, + &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, + le16_to_cpu(pd_pg0.DevHandle)))) { + raid_device->device_info = + le32_to_cpu(sas_device_pg0.DeviceInfo); + } + } + + kfree(vol_pg0); +} + +/** + * scsih_slave_configure - device configure routine. + * @sdev: scsi device struct + * + * Returns 0 if ok. Any other return is assumed to be an error and + * the device is ignored. + */ +static int +scsih_slave_configure(struct scsi_device *sdev) +{ + struct Scsi_Host *shost = sdev->host; + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct MPT2SAS_TARGET *sas_target_priv_data; + struct _sas_device *sas_device; + struct _raid_device *raid_device; + unsigned long flags; + int qdepth; + u8 ssp_target = 0; + char *ds = ""; + char *r_level = ""; + + qdepth = 1; + sas_device_priv_data = sdev->hostdata; + sas_device_priv_data->configured_lun = 1; + sas_device_priv_data->flags &= ~MPT_DEVICE_FLAGS_INIT; + sas_target_priv_data = sas_device_priv_data->sas_target; + + /* raid volume handling */ + if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME) { + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_handle(ioc, + sas_target_priv_data->handle); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + if (!raid_device) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return 0; + } + + _scsih_get_volume_capabilities(ioc, raid_device); + + /* RAID Queue Depth Support + * IS volume = underlying qdepth of drive type, either + * MPT2SAS_SAS_QUEUE_DEPTH or MPT2SAS_SATA_QUEUE_DEPTH + * IM/IME/R10 = 128 (MPT2SAS_RAID_QUEUE_DEPTH) + */ + if (raid_device->device_info & + MPI2_SAS_DEVICE_INFO_SSP_TARGET) { + qdepth = MPT2SAS_SAS_QUEUE_DEPTH; + ds = "SSP"; + } else { + qdepth = MPT2SAS_SATA_QUEUE_DEPTH; + if (raid_device->device_info & + MPI2_SAS_DEVICE_INFO_SATA_DEVICE) + ds = "SATA"; + else + ds = "STP"; + } + + switch (raid_device->volume_type) { + case MPI2_RAID_VOL_TYPE_RAID0: + r_level = "RAID0"; + break; + case MPI2_RAID_VOL_TYPE_RAID1E: + qdepth = MPT2SAS_RAID_QUEUE_DEPTH; + r_level = "RAID1E"; + break; + case MPI2_RAID_VOL_TYPE_RAID1: + qdepth = MPT2SAS_RAID_QUEUE_DEPTH; + r_level = "RAID1"; + break; + case MPI2_RAID_VOL_TYPE_RAID10: + qdepth = MPT2SAS_RAID_QUEUE_DEPTH; + r_level = "RAID10"; + break; + case MPI2_RAID_VOL_TYPE_UNKNOWN: + default: + qdepth = MPT2SAS_RAID_QUEUE_DEPTH; + r_level = "RAIDX"; + break; + } + + sdev_printk(KERN_INFO, sdev, "%s: " + "handle(0x%04x), wwid(0x%016llx), pd_count(%d), type(%s)\n", + r_level, raid_device->handle, + (unsigned long long)raid_device->wwid, + raid_device->num_pds, ds); + scsih_change_queue_depth(sdev, qdepth); + return 0; + } + + /* non-raid handling */ + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + sas_device_priv_data->sas_target->sas_address); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (sas_device) { + if (sas_target_priv_data->flags & + MPT_TARGET_FLAGS_RAID_COMPONENT) { + mpt2sas_config_get_volume_handle(ioc, + sas_device->handle, &sas_device->volume_handle); + mpt2sas_config_get_volume_wwid(ioc, + sas_device->volume_handle, + &sas_device->volume_wwid); + } + if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) { + qdepth = MPT2SAS_SAS_QUEUE_DEPTH; + ssp_target = 1; + ds = "SSP"; + } else { + qdepth = MPT2SAS_SATA_QUEUE_DEPTH; + if (sas_device->device_info & + MPI2_SAS_DEVICE_INFO_STP_TARGET) + ds = "STP"; + else if (sas_device->device_info & + MPI2_SAS_DEVICE_INFO_SATA_DEVICE) + ds = "SATA"; + } + + sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), " + "sas_addr(0x%016llx), device_name(0x%016llx)\n", + ds, sas_device->handle, + (unsigned long long)sas_device->sas_address, + (unsigned long long)sas_device->device_name); + sdev_printk(KERN_INFO, sdev, "%s: " + "enclosure_logical_id(0x%016llx), slot(%d)\n", ds, + (unsigned long long) sas_device->enclosure_logical_id, + sas_device->slot); + + if (!ssp_target) + scsih_display_sata_capabilities(ioc, sas_device, sdev); + } + + scsih_change_queue_depth(sdev, qdepth); + + if (ssp_target) + sas_read_port_mode_page(sdev); + return 0; +} + +/** + * scsih_bios_param - fetch head, sector, cylinder info for a disk + * @sdev: scsi device struct + * @bdev: pointer to block device context + * @capacity: device size (in 512 byte sectors) + * @params: three element array to place output: + * params[0] number of heads (max 255) + * params[1] number of sectors (max 63) + * params[2] number of cylinders + * + * Return nothing. + */ +static int +scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev, + sector_t capacity, int params[]) +{ + int heads; + int sectors; + sector_t cylinders; + ulong dummy; + + heads = 64; + sectors = 32; + + dummy = heads * sectors; + cylinders = capacity; + sector_div(cylinders, dummy); + + /* + * Handle extended translation size for logical drives + * > 1Gb + */ + if ((ulong)capacity >= 0x200000) { + heads = 255; + sectors = 63; + dummy = heads * sectors; + cylinders = capacity; + sector_div(cylinders, dummy); + } + + /* return result */ + params[0] = heads; + params[1] = sectors; + params[2] = cylinders; + + return 0; +} + +/** + * _scsih_response_code - translation of device response code + * @ioc: per adapter object + * @response_code: response code returned by the device + * + * Return nothing. + */ +static void +_scsih_response_code(struct MPT2SAS_ADAPTER *ioc, u8 response_code) +{ + char *desc; + + switch (response_code) { + case MPI2_SCSITASKMGMT_RSP_TM_COMPLETE: + desc = "task management request completed"; + break; + case MPI2_SCSITASKMGMT_RSP_INVALID_FRAME: + desc = "invalid frame"; + break; + case MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED: + desc = "task management request not supported"; + break; + case MPI2_SCSITASKMGMT_RSP_TM_FAILED: + desc = "task management request failed"; + break; + case MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED: + desc = "task management request succeeded"; + break; + case MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN: + desc = "invalid lun"; + break; + case 0xA: + desc = "overlapped tag attempted"; + break; + case MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC: + desc = "task queued, however not sent to target"; + break; + default: + desc = "unknown"; + break; + } + printk(MPT2SAS_WARN_FMT "response_code(0x%01x): %s\n", + ioc->name, response_code, desc); +} + +/** + * scsih_tm_done - tm completion routine + * @ioc: per adapter object + * @smid: system request message index + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * Context: none. + * + * The callback handler when using scsih_issue_tm. + * + * Return nothing. + */ +static void +scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + + if (ioc->tm_cmds.status == MPT2_CMD_NOT_USED) + return; + if (ioc->tm_cmds.smid != smid) + return; + ioc->tm_cmds.status |= MPT2_CMD_COMPLETE; + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + if (mpi_reply) { + memcpy(ioc->tm_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); + ioc->tm_cmds.status |= MPT2_CMD_REPLY_VALID; + } + ioc->tm_cmds.status &= ~MPT2_CMD_PENDING; + complete(&ioc->tm_cmds.done); +} + +/** + * mpt2sas_scsih_set_tm_flag - set per target tm_busy + * @ioc: per adapter object + * @handle: device handle + * + * During taskmangement request, we need to freeze the device queue. + */ +void +mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct scsi_device *sdev; + u8 skip = 0; + + shost_for_each_device(sdev, ioc->shost) { + if (skip) + continue; + sas_device_priv_data = sdev->hostdata; + if (!sas_device_priv_data) + continue; + if (sas_device_priv_data->sas_target->handle == handle) { + sas_device_priv_data->sas_target->tm_busy = 1; + skip = 1; + ioc->ignore_loginfos = 1; + } + } +} + +/** + * mpt2sas_scsih_clear_tm_flag - clear per target tm_busy + * @ioc: per adapter object + * @handle: device handle + * + * During taskmangement request, we need to freeze the device queue. + */ +void +mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct scsi_device *sdev; + u8 skip = 0; + + shost_for_each_device(sdev, ioc->shost) { + if (skip) + continue; + sas_device_priv_data = sdev->hostdata; + if (!sas_device_priv_data) + continue; + if (sas_device_priv_data->sas_target->handle == handle) { + sas_device_priv_data->sas_target->tm_busy = 0; + skip = 1; + ioc->ignore_loginfos = 0; + } + } +} + +/** + * mpt2sas_scsih_issue_tm - main routine for sending tm requests + * @ioc: per adapter struct + * @device_handle: device handle + * @lun: lun number + * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h) + * @smid_task: smid assigned to the task + * @timeout: timeout in seconds + * Context: The calling function needs to acquire the tm_cmds.mutex + * + * A generic API for sending task management requests to firmware. + * + * The ioc->tm_cmds.status flag should be MPT2_CMD_NOT_USED before calling + * this API. + * + * The callback index is set inside `ioc->tm_cb_idx`. + * + * Return nothing. + */ +void +mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun, + u8 type, u16 smid_task, ulong timeout) +{ + Mpi2SCSITaskManagementRequest_t *mpi_request; + Mpi2SCSITaskManagementReply_t *mpi_reply; + u16 smid = 0; + u32 ioc_state; + unsigned long timeleft; + u8 VF_ID = 0; + unsigned long flags; + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->tm_cmds.status != MPT2_CMD_NOT_USED || + ioc->shost_recovery) { + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n", + __func__, ioc->name); + return; + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + ioc_state = mpt2sas_base_get_iocstate(ioc, 0); + if (ioc_state & MPI2_DOORBELL_USED) { + dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "unexpected doorbell " + "active!\n", ioc->name)); + goto issue_host_reset; + } + + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { + mpt2sas_base_fault_info(ioc, ioc_state & + MPI2_DOORBELL_DATA_MASK); + goto issue_host_reset; + } + + smid = mpt2sas_base_get_smid(ioc, ioc->tm_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + return; + } + + dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "sending tm: handle(0x%04x)," + " task_type(0x%02x), smid(%d)\n", ioc->name, handle, type, smid)); + ioc->tm_cmds.status = MPT2_CMD_PENDING; + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->tm_cmds.smid = smid; + memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t)); + mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT; + mpi_request->DevHandle = cpu_to_le16(handle); + mpi_request->TaskType = type; + mpi_request->TaskMID = cpu_to_le16(smid_task); + int_to_scsilun(lun, (struct scsi_lun *)mpi_request->LUN); + mpt2sas_scsih_set_tm_flag(ioc, handle); + mpt2sas_base_put_smid_hi_priority(ioc, smid, VF_ID); + timeleft = wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ); + mpt2sas_scsih_clear_tm_flag(ioc, handle); + if (!(ioc->tm_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SCSITaskManagementRequest_t)/4); + if (!(ioc->tm_cmds.status & MPT2_CMD_RESET)) + goto issue_host_reset; + } + + if (ioc->tm_cmds.status & MPT2_CMD_REPLY_VALID) { + mpi_reply = ioc->tm_cmds.reply; + dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "complete tm: " + "ioc_status(0x%04x), loginfo(0x%08x), term_count(0x%08x)\n", + ioc->name, le16_to_cpu(mpi_reply->IOCStatus), + le32_to_cpu(mpi_reply->IOCLogInfo), + le32_to_cpu(mpi_reply->TerminationCount))); + if (ioc->logging_level & MPT_DEBUG_TM) + _scsih_response_code(ioc, mpi_reply->ResponseCode); + } + return; + issue_host_reset: + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER); +} + +/** + * scsih_abort - eh threads main abort routine + * @sdev: scsi device struct + * + * Returns SUCCESS if command aborted else FAILED + */ +static int +scsih_abort(struct scsi_cmnd *scmd) +{ + struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host); + struct MPT2SAS_DEVICE *sas_device_priv_data; + u16 smid; + u16 handle; + int r; + struct scsi_cmnd *scmd_lookup; + + printk(MPT2SAS_INFO_FMT "attempting task abort! scmd(%p)\n", + ioc->name, scmd); + scsi_print_command(scmd); + + sas_device_priv_data = scmd->device->hostdata; + if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { + printk(MPT2SAS_INFO_FMT "device been deleted! scmd(%p)\n", + ioc->name, scmd); + scmd->result = DID_NO_CONNECT << 16; + scmd->scsi_done(scmd); + r = SUCCESS; + goto out; + } + + /* search for the command */ + smid = _scsih_scsi_lookup_find_by_scmd(ioc, scmd); + if (!smid) { + scmd->result = DID_RESET << 16; + r = SUCCESS; + goto out; + } + + /* for hidden raid components and volumes this is not supported */ + if (sas_device_priv_data->sas_target->flags & + MPT_TARGET_FLAGS_RAID_COMPONENT || + sas_device_priv_data->sas_target->flags & MPT_TARGET_FLAGS_VOLUME) { + scmd->result = DID_RESET << 16; + r = FAILED; + goto out; + } + + mutex_lock(&ioc->tm_cmds.mutex); + handle = sas_device_priv_data->sas_target->handle; + mpt2sas_scsih_issue_tm(ioc, handle, sas_device_priv_data->lun, + MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30); + + /* sanity check - see whether command actually completed */ + scmd_lookup = _scsih_scsi_lookup_get(ioc, smid); + if (scmd_lookup && (scmd_lookup->serial_number == scmd->serial_number)) + r = FAILED; + else + r = SUCCESS; + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->tm_cmds.mutex); + + out: + printk(MPT2SAS_INFO_FMT "task abort: %s scmd(%p)\n", + ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); + return r; +} + + +/** + * scsih_dev_reset - eh threads main device reset routine + * @sdev: scsi device struct + * + * Returns SUCCESS if command aborted else FAILED + */ +static int +scsih_dev_reset(struct scsi_cmnd *scmd) +{ + struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host); + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct _sas_device *sas_device; + unsigned long flags; + u16 handle; + int r; + + printk(MPT2SAS_INFO_FMT "attempting target reset! scmd(%p)\n", + ioc->name, scmd); + scsi_print_command(scmd); + + sas_device_priv_data = scmd->device->hostdata; + if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { + printk(MPT2SAS_INFO_FMT "device been deleted! scmd(%p)\n", + ioc->name, scmd); + scmd->result = DID_NO_CONNECT << 16; + scmd->scsi_done(scmd); + r = SUCCESS; + goto out; + } + + /* for hidden raid components obtain the volume_handle */ + handle = 0; + if (sas_device_priv_data->sas_target->flags & + MPT_TARGET_FLAGS_RAID_COMPONENT) { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, + sas_device_priv_data->sas_target->handle); + if (sas_device) + handle = sas_device->volume_handle; + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + } else + handle = sas_device_priv_data->sas_target->handle; + + if (!handle) { + scmd->result = DID_RESET << 16; + r = FAILED; + goto out; + } + + mutex_lock(&ioc->tm_cmds.mutex); + mpt2sas_scsih_issue_tm(ioc, handle, 0, + MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 30); + + /* + * sanity check see whether all commands to this target been + * completed + */ + if (_scsih_scsi_lookup_find_by_target(ioc, scmd->device->id, + scmd->device->channel)) + r = FAILED; + else + r = SUCCESS; + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->tm_cmds.mutex); + + out: + printk(MPT2SAS_INFO_FMT "target reset: %s scmd(%p)\n", + ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); + return r; +} + +/** + * scsih_abort - eh threads main host reset routine + * @sdev: scsi device struct + * + * Returns SUCCESS if command aborted else FAILED + */ +static int +scsih_host_reset(struct scsi_cmnd *scmd) +{ + struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host); + int r, retval; + + printk(MPT2SAS_INFO_FMT "attempting host reset! scmd(%p)\n", + ioc->name, scmd); + scsi_print_command(scmd); + + retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + r = (retval < 0) ? FAILED : SUCCESS; + printk(MPT2SAS_INFO_FMT "host reset: %s scmd(%p)\n", + ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); + + return r; +} + +/** + * _scsih_fw_event_add - insert and queue up fw_event + * @ioc: per adapter object + * @fw_event: object describing the event + * Context: This function will acquire ioc->fw_event_lock. + * + * This adds the firmware event object into link list, then queues it up to + * be processed from user context. + * + * Return nothing. + */ +static void +_scsih_fw_event_add(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) +{ + unsigned long flags; + + if (ioc->firmware_event_thread == NULL) + return; + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + list_add_tail(&fw_event->list, &ioc->fw_event_list); + INIT_DELAYED_WORK(&fw_event->work, _firmware_event_work); + queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, 1); + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); +} + +/** + * _scsih_fw_event_free - delete fw_event + * @ioc: per adapter object + * @fw_event: object describing the event + * Context: This function will acquire ioc->fw_event_lock. + * + * This removes firmware event object from link list, frees associated memory. + * + * Return nothing. + */ +static void +_scsih_fw_event_free(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work + *fw_event) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + list_del(&fw_event->list); + kfree(fw_event->event_data); + kfree(fw_event); + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); +} + +/** + * _scsih_fw_event_add - requeue an event + * @ioc: per adapter object + * @fw_event: object describing the event + * Context: This function will acquire ioc->fw_event_lock. + * + * Return nothing. + */ +static void +_scsih_fw_event_requeue(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work + *fw_event, unsigned long delay) +{ + unsigned long flags; + if (ioc->firmware_event_thread == NULL) + return; + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, delay); + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); +} + +/** + * _scsih_fw_event_off - turn flag off preventing event handling + * @ioc: per adapter object + * + * Used to prevent handling of firmware events during adapter reset + * driver unload. + * + * Return nothing. + */ +static void +_scsih_fw_event_off(struct MPT2SAS_ADAPTER *ioc) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + ioc->fw_events_off = 1; + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + +} + +/** + * _scsih_fw_event_on - turn flag on allowing firmware event handling + * @ioc: per adapter object + * + * Returns nothing. + */ +static void +_scsih_fw_event_on(struct MPT2SAS_ADAPTER *ioc) +{ + unsigned long flags; + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + ioc->fw_events_off = 0; + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); +} + +/** + * _scsih_ublock_io_device - set the device state to SDEV_RUNNING + * @ioc: per adapter object + * @handle: device handle + * + * During device pull we need to appropiately set the sdev state. + */ +static void +_scsih_ublock_io_device(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct scsi_device *sdev; + + shost_for_each_device(sdev, ioc->shost) { + sas_device_priv_data = sdev->hostdata; + if (!sas_device_priv_data) + continue; + if (!sas_device_priv_data->block) + continue; + if (sas_device_priv_data->sas_target->handle == handle) { + dewtprintk(ioc, sdev_printk(KERN_INFO, sdev, + MPT2SAS_INFO_FMT "SDEV_RUNNING: " + "handle(0x%04x)\n", ioc->name, handle)); + sas_device_priv_data->block = 0; + scsi_device_set_state(sdev, SDEV_RUNNING); + } + } +} + +/** + * _scsih_block_io_device - set the device state to SDEV_BLOCK + * @ioc: per adapter object + * @handle: device handle + * + * During device pull we need to appropiately set the sdev state. + */ +static void +_scsih_block_io_device(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct scsi_device *sdev; + + shost_for_each_device(sdev, ioc->shost) { + sas_device_priv_data = sdev->hostdata; + if (!sas_device_priv_data) + continue; + if (sas_device_priv_data->block) + continue; + if (sas_device_priv_data->sas_target->handle == handle) { + dewtprintk(ioc, sdev_printk(KERN_INFO, sdev, + MPT2SAS_INFO_FMT "SDEV_BLOCK: " + "handle(0x%04x)\n", ioc->name, handle)); + sas_device_priv_data->block = 1; + scsi_device_set_state(sdev, SDEV_BLOCK); + } + } +} + +/** + * _scsih_block_io_to_children_attached_to_ex + * @ioc: per adapter object + * @sas_expander: the sas_device object + * + * This routine set sdev state to SDEV_BLOCK for all devices + * attached to this expander. This function called when expander is + * pulled. + */ +static void +_scsih_block_io_to_children_attached_to_ex(struct MPT2SAS_ADAPTER *ioc, + struct _sas_node *sas_expander) +{ + struct _sas_port *mpt2sas_port; + struct _sas_device *sas_device; + struct _sas_node *expander_sibling; + unsigned long flags; + + if (!sas_expander) + return; + + list_for_each_entry(mpt2sas_port, + &sas_expander->sas_port_list, port_list) { + if (mpt2sas_port->remote_identify.device_type == + SAS_END_DEVICE) { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = + mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + mpt2sas_port->remote_identify.sas_address); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (!sas_device) + continue; + _scsih_block_io_device(ioc, sas_device->handle); + } + } + + list_for_each_entry(mpt2sas_port, + &sas_expander->sas_port_list, port_list) { + + if (mpt2sas_port->remote_identify.device_type == + MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER || + mpt2sas_port->remote_identify.device_type == + MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) { + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + expander_sibling = + mpt2sas_scsih_expander_find_by_sas_address( + ioc, mpt2sas_port->remote_identify.sas_address); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + _scsih_block_io_to_children_attached_to_ex(ioc, + expander_sibling); + } + } +} + +/** + * _scsih_block_io_to_children_attached_directly + * @ioc: per adapter object + * @event_data: topology change event data + * + * This routine set sdev state to SDEV_BLOCK for all devices + * direct attached during device pull. + */ +static void +_scsih_block_io_to_children_attached_directly(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventDataSasTopologyChangeList_t *event_data) +{ + int i; + u16 handle; + u16 reason_code; + u8 phy_number; + + for (i = 0; i < event_data->NumEntries; i++) { + handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); + if (!handle) + continue; + phy_number = event_data->StartPhyNum + i; + reason_code = event_data->PHY[i].PhyStatus & + MPI2_EVENT_SAS_TOPO_RC_MASK; + if (reason_code == MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING) + _scsih_block_io_device(ioc, handle); + } +} + +/** + * _scsih_check_topo_delete_events - sanity check on topo events + * @ioc: per adapter object + * @event_data: the event data payload + * + * This routine added to better handle cable breaker. + * + * This handles the case where driver recieves multiple expander + * add and delete events in a single shot. When there is a delete event + * the routine will void any pending add events waiting in the event queue. + * + * Return nothing. + */ +static void +_scsih_check_topo_delete_events(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventDataSasTopologyChangeList_t *event_data) +{ + struct fw_event_work *fw_event; + Mpi2EventDataSasTopologyChangeList_t *local_event_data; + u16 expander_handle; + struct _sas_node *sas_expander; + unsigned long flags; + + expander_handle = le16_to_cpu(event_data->ExpanderDevHandle); + if (expander_handle < ioc->sas_hba.num_phys) { + _scsih_block_io_to_children_attached_directly(ioc, event_data); + return; + } + + if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING + || event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING) { + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc, + expander_handle); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + _scsih_block_io_to_children_attached_to_ex(ioc, sas_expander); + } else if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_RESPONDING) + _scsih_block_io_to_children_attached_directly(ioc, event_data); + + if (event_data->ExpStatus != MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING) + return; + + /* mark ignore flag for pending events */ + spin_lock_irqsave(&ioc->fw_event_lock, flags); + list_for_each_entry(fw_event, &ioc->fw_event_list, list) { + if (fw_event->event != MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST || + fw_event->ignore) + continue; + local_event_data = fw_event->event_data; + if (local_event_data->ExpStatus == + MPI2_EVENT_SAS_TOPO_ES_ADDED || + local_event_data->ExpStatus == + MPI2_EVENT_SAS_TOPO_ES_RESPONDING) { + if (le16_to_cpu(local_event_data->ExpanderDevHandle) == + expander_handle) { + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "setting ignoring flag\n", ioc->name)); + fw_event->ignore = 1; + } + } + } + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); +} + +/** + * _scsih_queue_rescan - queue a topology rescan from user context + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_scsih_queue_rescan(struct MPT2SAS_ADAPTER *ioc) +{ + struct fw_event_work *fw_event; + + if (ioc->wait_for_port_enable_to_complete) + return; + fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); + if (!fw_event) + return; + fw_event->event = MPT2SAS_RESCAN_AFTER_HOST_RESET; + fw_event->ioc = ioc; + _scsih_fw_event_add(ioc, fw_event); +} + +/** + * _scsih_flush_running_cmds - completing outstanding commands. + * @ioc: per adapter object + * + * The flushing out of all pending scmd commands following host reset, + * where all IO is dropped to the floor. + * + * Return nothing. + */ +static void +_scsih_flush_running_cmds(struct MPT2SAS_ADAPTER *ioc) +{ + struct scsi_cmnd *scmd; + u16 smid; + u16 count = 0; + + for (smid = 1; smid <= ioc->request_depth; smid++) { + scmd = _scsih_scsi_lookup_getclear(ioc, smid); + if (!scmd) + continue; + count++; + mpt2sas_base_free_smid(ioc, smid); + scsi_dma_unmap(scmd); + scmd->result = DID_RESET << 16; + scmd->scsi_done(scmd); + } + dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "completing %d cmds\n", + ioc->name, count)); +} + +/** + * mpt2sas_scsih_reset_handler - reset callback handler (for scsih) + * @ioc: per adapter object + * @reset_phase: phase + * + * The handler for doing any required cleanup or initialization. + * + * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET, + * MPT2_IOC_DONE_RESET + * + * Return nothing. + */ +void +mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) +{ + switch (reset_phase) { + case MPT2_IOC_PRE_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_PRE_RESET\n", ioc->name, __func__)); + _scsih_fw_event_off(ioc); + break; + case MPT2_IOC_AFTER_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__)); + if (ioc->tm_cmds.status & MPT2_CMD_PENDING) { + ioc->tm_cmds.status |= MPT2_CMD_RESET; + mpt2sas_base_free_smid(ioc, ioc->tm_cmds.smid); + complete(&ioc->tm_cmds.done); + } + _scsih_fw_event_on(ioc); + _scsih_flush_running_cmds(ioc); + break; + case MPT2_IOC_DONE_RESET: + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "MPT2_IOC_DONE_RESET\n", ioc->name, __func__)); + _scsih_queue_rescan(ioc); + break; + } +} + +/** + * scsih_qcmd - main scsi request entry point + * @scmd: pointer to scsi command object + * @done: function pointer to be invoked on completion + * + * The callback index is set inside `ioc->scsi_io_cb_idx`. + * + * Returns 0 on success. If there's a failure, return either: + * SCSI_MLQUEUE_DEVICE_BUSY if the device queue is full, or + * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full + */ +static int +scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *)) +{ + struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host); + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct MPT2SAS_TARGET *sas_target_priv_data; + Mpi2SCSIIORequest_t *mpi_request; + u32 mpi_control; + u16 smid; + unsigned long flags; + + scmd->scsi_done = done; + sas_device_priv_data = scmd->device->hostdata; + if (!sas_device_priv_data) { + scmd->result = DID_NO_CONNECT << 16; + scmd->scsi_done(scmd); + return 0; + } + + sas_target_priv_data = sas_device_priv_data->sas_target; + if (!sas_target_priv_data || sas_target_priv_data->handle == + MPT2SAS_INVALID_DEVICE_HANDLE || sas_target_priv_data->deleted) { + scmd->result = DID_NO_CONNECT << 16; + scmd->scsi_done(scmd); + return 0; + } + + /* see if we are busy with task managment stuff */ + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (sas_target_priv_data->tm_busy || + ioc->shost_recovery || ioc->ioc_link_reset_in_progress) { + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + return SCSI_MLQUEUE_HOST_BUSY; + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + if (scmd->sc_data_direction == DMA_FROM_DEVICE) + mpi_control = MPI2_SCSIIO_CONTROL_READ; + else if (scmd->sc_data_direction == DMA_TO_DEVICE) + mpi_control = MPI2_SCSIIO_CONTROL_WRITE; + else + mpi_control = MPI2_SCSIIO_CONTROL_NODATATRANSFER; + + /* set tags */ + if (!(sas_device_priv_data->flags & MPT_DEVICE_FLAGS_INIT)) { + if (scmd->device->tagged_supported) { + if (scmd->device->ordered_tags) + mpi_control |= MPI2_SCSIIO_CONTROL_ORDEREDQ; + else + mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ; + } else +/* MPI Revision I (UNIT = 0xA) - removed MPI2_SCSIIO_CONTROL_UNTAGGED */ +/* mpi_control |= MPI2_SCSIIO_CONTROL_UNTAGGED; + */ + mpi_control |= (0x500); + + } else + mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ; + + if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON)) + mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON; + + smid = mpt2sas_base_get_smid(ioc, ioc->scsi_io_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + goto out; + } + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + memset(mpi_request, 0, sizeof(Mpi2SCSIIORequest_t)); + mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST; + if (sas_device_priv_data->sas_target->flags & + MPT_TARGET_FLAGS_RAID_COMPONENT) + mpi_request->Function = MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH; + else + mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST; + mpi_request->DevHandle = + cpu_to_le16(sas_device_priv_data->sas_target->handle); + mpi_request->DataLength = cpu_to_le32(scsi_bufflen(scmd)); + mpi_request->Control = cpu_to_le32(mpi_control); + mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len); + mpi_request->MsgFlags = MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR; + mpi_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE; + mpi_request->SenseBufferLowAddress = + (u32)mpt2sas_base_get_sense_buffer_dma(ioc, smid); + mpi_request->SGLOffset0 = offsetof(Mpi2SCSIIORequest_t, SGL) / 4; + mpi_request->SGLFlags = cpu_to_le16(MPI2_SCSIIO_SGLFLAGS_TYPE_MPI + + MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR); + + int_to_scsilun(sas_device_priv_data->lun, (struct scsi_lun *) + mpi_request->LUN); + memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len); + + if (!mpi_request->DataLength) { + mpt2sas_base_build_zero_len_sge(ioc, &mpi_request->SGL); + } else { + if (_scsih_build_scatter_gather(ioc, scmd, smid)) { + mpt2sas_base_free_smid(ioc, smid); + goto out; + } + } + + _scsih_scsi_lookup_set(ioc, smid, scmd); + mpt2sas_base_put_smid_scsi_io(ioc, smid, 0, + sas_device_priv_data->sas_target->handle); + return 0; + + out: + return SCSI_MLQUEUE_HOST_BUSY; +} + +/** + * _scsih_normalize_sense - normalize descriptor and fixed format sense data + * @sense_buffer: sense data returned by target + * @data: normalized skey/asc/ascq + * + * Return nothing. + */ +static void +_scsih_normalize_sense(char *sense_buffer, struct sense_info *data) +{ + if ((sense_buffer[0] & 0x7F) >= 0x72) { + /* descriptor format */ + data->skey = sense_buffer[1] & 0x0F; + data->asc = sense_buffer[2]; + data->ascq = sense_buffer[3]; + } else { + /* fixed format */ + data->skey = sense_buffer[2] & 0x0F; + data->asc = sense_buffer[12]; + data->ascq = sense_buffer[13]; + } +} + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request + * @ioc: per adapter object + * @scmd: pointer to scsi command object + * @mpi_reply: reply mf payload returned from firmware + * + * scsi_status - SCSI Status code returned from target device + * scsi_state - state info associated with SCSI_IO determined by ioc + * ioc_status - ioc supplied status info + * + * Return nothing. + */ +static void +_scsih_scsi_ioc_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, + Mpi2SCSIIOReply_t *mpi_reply, u16 smid) +{ + u32 response_info; + u8 *response_bytes; + u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & + MPI2_IOCSTATUS_MASK; + u8 scsi_state = mpi_reply->SCSIState; + u8 scsi_status = mpi_reply->SCSIStatus; + char *desc_ioc_state = NULL; + char *desc_scsi_status = NULL; + char *desc_scsi_state = ioc->tmp_string; + + switch (ioc_status) { + case MPI2_IOCSTATUS_SUCCESS: + desc_ioc_state = "success"; + break; + case MPI2_IOCSTATUS_INVALID_FUNCTION: + desc_ioc_state = "invalid function"; + break; + case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR: + desc_ioc_state = "scsi recovered error"; + break; + case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE: + desc_ioc_state = "scsi invalid dev handle"; + break; + case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE: + desc_ioc_state = "scsi device not there"; + break; + case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN: + desc_ioc_state = "scsi data overrun"; + break; + case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN: + desc_ioc_state = "scsi data underrun"; + break; + case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR: + desc_ioc_state = "scsi io data error"; + break; + case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR: + desc_ioc_state = "scsi protocol error"; + break; + case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED: + desc_ioc_state = "scsi task terminated"; + break; + case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: + desc_ioc_state = "scsi residual mismatch"; + break; + case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED: + desc_ioc_state = "scsi task mgmt failed"; + break; + case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED: + desc_ioc_state = "scsi ioc terminated"; + break; + case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED: + desc_ioc_state = "scsi ext terminated"; + break; + default: + desc_ioc_state = "unknown"; + break; + } + + switch (scsi_status) { + case MPI2_SCSI_STATUS_GOOD: + desc_scsi_status = "good"; + break; + case MPI2_SCSI_STATUS_CHECK_CONDITION: + desc_scsi_status = "check condition"; + break; + case MPI2_SCSI_STATUS_CONDITION_MET: + desc_scsi_status = "condition met"; + break; + case MPI2_SCSI_STATUS_BUSY: + desc_scsi_status = "busy"; + break; + case MPI2_SCSI_STATUS_INTERMEDIATE: + desc_scsi_status = "intermediate"; + break; + case MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET: + desc_scsi_status = "intermediate condmet"; + break; + case MPI2_SCSI_STATUS_RESERVATION_CONFLICT: + desc_scsi_status = "reservation conflict"; + break; + case MPI2_SCSI_STATUS_COMMAND_TERMINATED: + desc_scsi_status = "command terminated"; + break; + case MPI2_SCSI_STATUS_TASK_SET_FULL: + desc_scsi_status = "task set full"; + break; + case MPI2_SCSI_STATUS_ACA_ACTIVE: + desc_scsi_status = "aca active"; + break; + case MPI2_SCSI_STATUS_TASK_ABORTED: + desc_scsi_status = "task aborted"; + break; + default: + desc_scsi_status = "unknown"; + break; + } + + desc_scsi_state[0] = '\0'; + if (!scsi_state) + desc_scsi_state = " "; + if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) + strcat(desc_scsi_state, "response info "); + if (scsi_state & MPI2_SCSI_STATE_TERMINATED) + strcat(desc_scsi_state, "state terminated "); + if (scsi_state & MPI2_SCSI_STATE_NO_SCSI_STATUS) + strcat(desc_scsi_state, "no status "); + if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_FAILED) + strcat(desc_scsi_state, "autosense failed "); + if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) + strcat(desc_scsi_state, "autosense valid "); + + scsi_print_command(scmd); + printk(MPT2SAS_WARN_FMT "\tdev handle(0x%04x), " + "ioc_status(%s)(0x%04x), smid(%d)\n", ioc->name, + le16_to_cpu(mpi_reply->DevHandle), desc_ioc_state, + ioc_status, smid); + printk(MPT2SAS_WARN_FMT "\trequest_len(%d), underflow(%d), " + "resid(%d)\n", ioc->name, scsi_bufflen(scmd), scmd->underflow, + scsi_get_resid(scmd)); + printk(MPT2SAS_WARN_FMT "\ttag(%d), transfer_count(%d), " + "sc->result(0x%08x)\n", ioc->name, le16_to_cpu(mpi_reply->TaskTag), + le32_to_cpu(mpi_reply->TransferCount), scmd->result); + printk(MPT2SAS_WARN_FMT "\tscsi_status(%s)(0x%02x), " + "scsi_state(%s)(0x%02x)\n", ioc->name, desc_scsi_status, + scsi_status, desc_scsi_state, scsi_state); + + if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) { + struct sense_info data; + _scsih_normalize_sense(scmd->sense_buffer, &data); + printk(MPT2SAS_WARN_FMT "\t[sense_key,asc,ascq]: " + "[0x%02x,0x%02x,0x%02x]\n", ioc->name, data.skey, + data.asc, data.ascq); + } + + if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) { + response_info = le32_to_cpu(mpi_reply->ResponseInfo); + response_bytes = (u8 *)&response_info; + _scsih_response_code(ioc, response_bytes[3]); + } +} +#endif + +/** + * _scsih_smart_predicted_fault - illuminate Fault LED + * @ioc: per adapter object + * @handle: device handle + * + * Return nothing. + */ +static void +_scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + Mpi2SepReply_t mpi_reply; + Mpi2SepRequest_t mpi_request; + struct scsi_target *starget; + struct MPT2SAS_TARGET *sas_target_priv_data; + Mpi2EventNotificationReply_t *event_reply; + Mpi2EventDataSasDeviceStatusChange_t *event_data; + struct _sas_device *sas_device; + ssize_t sz; + unsigned long flags; + + /* only handle non-raid devices */ + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + if (!sas_device) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return; + } + starget = sas_device->starget; + sas_target_priv_data = starget->hostdata; + + if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) || + ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return; + } + starget_printk(KERN_WARNING, starget, "predicted fault\n"); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM) { + memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t)); + mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR; + mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS; + mpi_request.SlotStatus = + MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT; + mpi_request.DevHandle = cpu_to_le16(handle); + mpi_request.Flags = MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS; + if ((mpt2sas_base_scsi_enclosure_processor(ioc, &mpi_reply, + &mpi_request)) != 0) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) { + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT + "enclosure_processor: ioc_status (0x%04x), " + "loginfo(0x%08x)\n", ioc->name, + le16_to_cpu(mpi_reply.IOCStatus), + le32_to_cpu(mpi_reply.IOCLogInfo))); + return; + } + } + + /* insert into event log */ + sz = offsetof(Mpi2EventNotificationReply_t, EventData) + + sizeof(Mpi2EventDataSasDeviceStatusChange_t); + event_reply = kzalloc(sz, GFP_KERNEL); + if (!event_reply) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + event_reply->Function = MPI2_FUNCTION_EVENT_NOTIFICATION; + event_reply->Event = + cpu_to_le16(MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE); + event_reply->MsgLength = sz/4; + event_reply->EventDataLength = + cpu_to_le16(sizeof(Mpi2EventDataSasDeviceStatusChange_t)/4); + event_data = (Mpi2EventDataSasDeviceStatusChange_t *) + event_reply->EventData; + event_data->ReasonCode = MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA; + event_data->ASC = 0x5D; + event_data->DevHandle = cpu_to_le16(handle); + event_data->SASAddress = cpu_to_le64(sas_target_priv_data->sas_address); + mpt2sas_ctl_add_to_event_log(ioc, event_reply); + kfree(event_reply); +} + +/** + * scsih_io_done - scsi request callback + * @ioc: per adapter object + * @smid: system request message index + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * + * Callback handler when using scsih_qcmd. + * + * Return nothing. + */ +static void +scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) +{ + Mpi2SCSIIORequest_t *mpi_request; + Mpi2SCSIIOReply_t *mpi_reply; + struct scsi_cmnd *scmd; + u16 ioc_status; + u32 xfer_cnt; + u8 scsi_state; + u8 scsi_status; + u32 log_info; + struct MPT2SAS_DEVICE *sas_device_priv_data; + u32 response_code; + + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + scmd = _scsih_scsi_lookup_getclear(ioc, smid); + if (scmd == NULL) + return; + + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + + if (mpi_reply == NULL) { + scmd->result = DID_OK << 16; + goto out; + } + + sas_device_priv_data = scmd->device->hostdata; + if (!sas_device_priv_data || !sas_device_priv_data->sas_target || + sas_device_priv_data->sas_target->deleted) { + scmd->result = DID_NO_CONNECT << 16; + goto out; + } + + /* turning off TLR */ + if (!sas_device_priv_data->tlr_snoop_check) { + sas_device_priv_data->tlr_snoop_check++; + if (sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) { + response_code = (le32_to_cpu(mpi_reply->ResponseInfo) + >> 24); + if (response_code == + MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) + sas_device_priv_data->flags &= + ~MPT_DEVICE_TLR_ON; + } + } + + xfer_cnt = le32_to_cpu(mpi_reply->TransferCount); + scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt); + ioc_status = le16_to_cpu(mpi_reply->IOCStatus); + if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) + log_info = le32_to_cpu(mpi_reply->IOCLogInfo); + else + log_info = 0; + ioc_status &= MPI2_IOCSTATUS_MASK; + scsi_state = mpi_reply->SCSIState; + scsi_status = mpi_reply->SCSIStatus; + + if (ioc_status == MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 && + (scsi_status == MPI2_SCSI_STATUS_BUSY || + scsi_status == MPI2_SCSI_STATUS_RESERVATION_CONFLICT || + scsi_status == MPI2_SCSI_STATUS_TASK_SET_FULL)) { + ioc_status = MPI2_IOCSTATUS_SUCCESS; + } + + if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) { + struct sense_info data; + const void *sense_data = mpt2sas_base_get_sense_buffer(ioc, + smid); + memcpy(scmd->sense_buffer, sense_data, + le32_to_cpu(mpi_reply->SenseCount)); + _scsih_normalize_sense(scmd->sense_buffer, &data); + /* failure prediction threshold exceeded */ + if (data.asc == 0x5D) + _scsih_smart_predicted_fault(ioc, + le16_to_cpu(mpi_reply->DevHandle)); + } + + switch (ioc_status) { + case MPI2_IOCSTATUS_BUSY: + case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES: + scmd->result = SAM_STAT_BUSY; + break; + + case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE: + scmd->result = DID_NO_CONNECT << 16; + break; + + case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED: + if (sas_device_priv_data->block) { + scmd->result = (DID_BUS_BUSY << 16); + break; + } + + case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED: + case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED: + scmd->result = DID_RESET << 16; + break; + + case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: + if ((xfer_cnt == 0) || (scmd->underflow > xfer_cnt)) + scmd->result = DID_SOFT_ERROR << 16; + else + scmd->result = (DID_OK << 16) | scsi_status; + break; + + case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN: + scmd->result = (DID_OK << 16) | scsi_status; + + if ((scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID)) + break; + + if (xfer_cnt < scmd->underflow) { + if (scsi_status == SAM_STAT_BUSY) + scmd->result = SAM_STAT_BUSY; + else + scmd->result = DID_SOFT_ERROR << 16; + } else if (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED | + MPI2_SCSI_STATE_NO_SCSI_STATUS)) + scmd->result = DID_SOFT_ERROR << 16; + else if (scsi_state & MPI2_SCSI_STATE_TERMINATED) + scmd->result = DID_RESET << 16; + else if (!xfer_cnt && scmd->cmnd[0] == REPORT_LUNS) { + mpi_reply->SCSIState = MPI2_SCSI_STATE_AUTOSENSE_VALID; + mpi_reply->SCSIStatus = SAM_STAT_CHECK_CONDITION; + scmd->result = (DRIVER_SENSE << 24) | + SAM_STAT_CHECK_CONDITION; + scmd->sense_buffer[0] = 0x70; + scmd->sense_buffer[2] = ILLEGAL_REQUEST; + scmd->sense_buffer[12] = 0x20; + scmd->sense_buffer[13] = 0; + } + break; + + case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN: + scsi_set_resid(scmd, 0); + case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR: + case MPI2_IOCSTATUS_SUCCESS: + scmd->result = (DID_OK << 16) | scsi_status; + if (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED | + MPI2_SCSI_STATE_NO_SCSI_STATUS)) + scmd->result = DID_SOFT_ERROR << 16; + else if (scsi_state & MPI2_SCSI_STATE_TERMINATED) + scmd->result = DID_RESET << 16; + break; + + case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR: + case MPI2_IOCSTATUS_INVALID_FUNCTION: + case MPI2_IOCSTATUS_INVALID_SGL: + case MPI2_IOCSTATUS_INTERNAL_ERROR: + case MPI2_IOCSTATUS_INVALID_FIELD: + case MPI2_IOCSTATUS_INVALID_STATE: + case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR: + case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED: + default: + scmd->result = DID_SOFT_ERROR << 16; + break; + + } + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (scmd->result && (ioc->logging_level & MPT_DEBUG_REPLY)) + _scsih_scsi_ioc_info(ioc , scmd, mpi_reply, smid); +#endif + + out: + scsi_dma_unmap(scmd); + scmd->scsi_done(scmd); +} + +/** + * _scsih_link_change - process phy link changes + * @ioc: per adapter object + * @handle: phy handle + * @attached_handle: valid for devices attached to link + * @phy_number: phy number + * @link_rate: new link rate + * Context: user. + * + * Return nothing. + */ +static void +_scsih_link_change(struct MPT2SAS_ADAPTER *ioc, u16 handle, u16 attached_handle, + u8 phy_number, u8 link_rate) +{ + mpt2sas_transport_update_phy_link_change(ioc, handle, attached_handle, + phy_number, link_rate); +} + +/** + * _scsih_sas_host_refresh - refreshing sas host object contents + * @ioc: per adapter object + * @update: update link information + * Context: user + * + * During port enable, fw will send topology events for every device. Its + * possible that the handles may change from the previous setting, so this + * code keeping handles updating if changed. + * + * Return nothing. + */ +static void +_scsih_sas_host_refresh(struct MPT2SAS_ADAPTER *ioc, u8 update) +{ + u16 sz; + u16 ioc_status; + int i; + Mpi2ConfigReply_t mpi_reply; + Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL; + + dtmprintk(ioc, printk(MPT2SAS_INFO_FMT + "updating handles for sas_host(0x%016llx)\n", + ioc->name, (unsigned long long)ioc->sas_hba.sas_address)); + + sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys + * sizeof(Mpi2SasIOUnit0PhyData_t)); + sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg0) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + if (!(mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply, + sas_iounit_pg0, sz))) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) + goto out; + for (i = 0; i < ioc->sas_hba.num_phys ; i++) { + ioc->sas_hba.phy[i].handle = + le16_to_cpu(sas_iounit_pg0->PhyData[i]. + ControllerDevHandle); + if (update) + _scsih_link_change(ioc, + ioc->sas_hba.phy[i].handle, + le16_to_cpu(sas_iounit_pg0->PhyData[i]. + AttachedDevHandle), i, + sas_iounit_pg0->PhyData[i]. + NegotiatedLinkRate >> 4); + } + } + + out: + kfree(sas_iounit_pg0); +} + +/** + * _scsih_sas_host_add - create sas host object + * @ioc: per adapter object + * + * Creating host side data object, stored in ioc->sas_hba + * + * Return nothing. + */ +static void +_scsih_sas_host_add(struct MPT2SAS_ADAPTER *ioc) +{ + int i; + Mpi2ConfigReply_t mpi_reply; + Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL; + Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; + Mpi2SasPhyPage0_t phy_pg0; + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2SasEnclosurePage0_t enclosure_pg0; + u16 ioc_status; + u16 sz; + u16 device_missing_delay; + + mpt2sas_config_get_number_hba_phys(ioc, &ioc->sas_hba.num_phys); + if (!ioc->sas_hba.num_phys) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + /* sas_iounit page 0 */ + sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys * + sizeof(Mpi2SasIOUnit0PhyData_t)); + sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg0) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + if ((mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply, + sas_iounit_pg0, sz))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + + /* sas_iounit page 1 */ + sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys * + sizeof(Mpi2SasIOUnit1PhyData_t)); + sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg1) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, + sas_iounit_pg1, sz))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + + ioc->io_missing_delay = + le16_to_cpu(sas_iounit_pg1->IODeviceMissingDelay); + device_missing_delay = + le16_to_cpu(sas_iounit_pg1->ReportDeviceMissingDelay); + if (device_missing_delay & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16) + ioc->device_missing_delay = (device_missing_delay & + MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16; + else + ioc->device_missing_delay = device_missing_delay & + MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK; + + ioc->sas_hba.parent_dev = &ioc->shost->shost_gendev; + ioc->sas_hba.phy = kcalloc(ioc->sas_hba.num_phys, + sizeof(struct _sas_phy), GFP_KERNEL); + if (!ioc->sas_hba.phy) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + for (i = 0; i < ioc->sas_hba.num_phys ; i++) { + if ((mpt2sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0, + i))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc->sas_hba.phy[i].handle = + le16_to_cpu(sas_iounit_pg0->PhyData[i].ControllerDevHandle); + ioc->sas_hba.phy[i].phy_id = i; + mpt2sas_transport_add_host_phy(ioc, &ioc->sas_hba.phy[i], + phy_pg0, ioc->sas_hba.parent_dev); + } + if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, + MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, ioc->sas_hba.phy[0].handle))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc->sas_hba.handle = le16_to_cpu(sas_device_pg0.DevHandle); + ioc->sas_hba.enclosure_handle = + le16_to_cpu(sas_device_pg0.EnclosureHandle); + ioc->sas_hba.sas_address = le64_to_cpu(sas_device_pg0.SASAddress); + printk(MPT2SAS_INFO_FMT "host_add: handle(0x%04x), " + "sas_addr(0x%016llx), phys(%d)\n", ioc->name, ioc->sas_hba.handle, + (unsigned long long) ioc->sas_hba.sas_address, + ioc->sas_hba.num_phys) ; + + if (ioc->sas_hba.enclosure_handle) { + if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply, + &enclosure_pg0, + MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE, + ioc->sas_hba.enclosure_handle))) { + ioc->sas_hba.enclosure_logical_id = + le64_to_cpu(enclosure_pg0.EnclosureLogicalID); + } + } + + out: + kfree(sas_iounit_pg1); + kfree(sas_iounit_pg0); +} + +/** + * _scsih_expander_add - creating expander object + * @ioc: per adapter object + * @handle: expander handle + * + * Creating expander object, stored in ioc->sas_expander_list. + * + * Return 0 for success, else error. + */ +static int +_scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct _sas_node *sas_expander; + Mpi2ConfigReply_t mpi_reply; + Mpi2ExpanderPage0_t expander_pg0; + Mpi2ExpanderPage1_t expander_pg1; + Mpi2SasEnclosurePage0_t enclosure_pg0; + u32 ioc_status; + u16 parent_handle; + __le64 sas_address; + int i; + unsigned long flags; + struct _sas_port *mpt2sas_port; + int rc = 0; + + if (!handle) + return -1; + + if ((mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0, + MPI2_SAS_EXPAND_PGAD_FORM_HNDL, handle))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + /* handle out of order topology events */ + parent_handle = le16_to_cpu(expander_pg0.ParentDevHandle); + if (parent_handle >= ioc->sas_hba.num_phys) { + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc, + parent_handle); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + if (!sas_expander) { + rc = _scsih_expander_add(ioc, parent_handle); + if (rc != 0) + return rc; + } + } + + sas_address = le64_to_cpu(expander_pg0.SASAddress); + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc, + sas_address); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + if (sas_expander) + return 0; + + sas_expander = kzalloc(sizeof(struct _sas_node), + GFP_KERNEL); + if (!sas_expander) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + sas_expander->handle = handle; + sas_expander->num_phys = expander_pg0.NumPhys; + sas_expander->parent_handle = parent_handle; + sas_expander->enclosure_handle = + le16_to_cpu(expander_pg0.EnclosureHandle); + sas_expander->sas_address = sas_address; + + printk(MPT2SAS_INFO_FMT "expander_add: handle(0x%04x)," + " parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n", ioc->name, + handle, sas_expander->parent_handle, (unsigned long long) + sas_expander->sas_address, sas_expander->num_phys); + + if (!sas_expander->num_phys) + goto out_fail; + sas_expander->phy = kcalloc(sas_expander->num_phys, + sizeof(struct _sas_phy), GFP_KERNEL); + if (!sas_expander->phy) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -1; + goto out_fail; + } + + INIT_LIST_HEAD(&sas_expander->sas_port_list); + mpt2sas_port = mpt2sas_transport_port_add(ioc, handle, + sas_expander->parent_handle); + if (!mpt2sas_port) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -1; + goto out_fail; + } + sas_expander->parent_dev = &mpt2sas_port->rphy->dev; + + for (i = 0 ; i < sas_expander->num_phys ; i++) { + if ((mpt2sas_config_get_expander_pg1(ioc, &mpi_reply, + &expander_pg1, i, handle))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + continue; + } + sas_expander->phy[i].handle = handle; + sas_expander->phy[i].phy_id = i; + mpt2sas_transport_add_expander_phy(ioc, &sas_expander->phy[i], + expander_pg1, sas_expander->parent_dev); + } + + if (sas_expander->enclosure_handle) { + if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply, + &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE, + sas_expander->enclosure_handle))) { + sas_expander->enclosure_logical_id = + le64_to_cpu(enclosure_pg0.EnclosureLogicalID); + } + } + + _scsih_expander_node_add(ioc, sas_expander); + return 0; + + out_fail: + + if (sas_expander) + kfree(sas_expander->phy); + kfree(sas_expander); + return rc; +} + +/** + * _scsih_expander_remove - removing expander object + * @ioc: per adapter object + * @handle: expander handle + * + * Return nothing. + */ +static void +_scsih_expander_remove(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct _sas_node *sas_expander; + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + _scsih_expander_node_remove(ioc, sas_expander); +} + +/** + * _scsih_add_device - creating sas device object + * @ioc: per adapter object + * @handle: sas device handle + * @phy_num: phy number end device attached to + * @is_pd: is this hidden raid component + * + * Creating end device object, stored in ioc->sas_device_list. + * + * Returns 0 for success, non-zero for failure. + */ +static int +_scsih_add_device(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u8 is_pd) +{ + Mpi2ConfigReply_t mpi_reply; + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2SasEnclosurePage0_t enclosure_pg0; + struct _sas_device *sas_device; + u32 ioc_status; + __le64 sas_address; + u32 device_info; + unsigned long flags; + + if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, + MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + /* check if device is present */ + if (!(le16_to_cpu(sas_device_pg0.Flags) & + MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + printk(MPT2SAS_ERR_FMT "Flags = 0x%04x\n", + ioc->name, le16_to_cpu(sas_device_pg0.Flags)); + return -1; + } + + /* check if there were any issus with discovery */ + if (sas_device_pg0.AccessStatus == + MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + printk(MPT2SAS_ERR_FMT "AccessStatus = 0x%02x\n", + ioc->name, sas_device_pg0.AccessStatus); + return -1; + } + + /* check if this is end device */ + device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); + if (!(_scsih_is_end_device(device_info))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + sas_address = le64_to_cpu(sas_device_pg0.SASAddress); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + sas_address); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + if (sas_device) { + _scsih_ublock_io_device(ioc, handle); + return 0; + } + + sas_device = kzalloc(sizeof(struct _sas_device), + GFP_KERNEL); + if (!sas_device) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + sas_device->handle = handle; + sas_device->parent_handle = + le16_to_cpu(sas_device_pg0.ParentDevHandle); + sas_device->enclosure_handle = + le16_to_cpu(sas_device_pg0.EnclosureHandle); + sas_device->slot = + le16_to_cpu(sas_device_pg0.Slot); + sas_device->device_info = device_info; + sas_device->sas_address = sas_address; + sas_device->hidden_raid_component = is_pd; + + /* get enclosure_logical_id */ + if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply, &enclosure_pg0, + MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE, + sas_device->enclosure_handle))) { + sas_device->enclosure_logical_id = + le64_to_cpu(enclosure_pg0.EnclosureLogicalID); + } + + /* get device name */ + sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName); + + if (ioc->wait_for_port_enable_to_complete) + _scsih_sas_device_init_add(ioc, sas_device); + else + _scsih_sas_device_add(ioc, sas_device); + + return 0; +} + +/** + * _scsih_remove_device - removing sas device object + * @ioc: per adapter object + * @handle: sas device handle + * + * Return nothing. + */ +static void +_scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct MPT2SAS_TARGET *sas_target_priv_data; + struct _sas_device *sas_device; + unsigned long flags; + Mpi2SasIoUnitControlReply_t mpi_reply; + Mpi2SasIoUnitControlRequest_t mpi_request; + u16 device_handle; + + /* lookup sas_device */ + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + if (!sas_device) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return; + } + + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter: handle" + "(0x%04x)\n", ioc->name, __func__, handle)); + + if (sas_device->starget && sas_device->starget->hostdata) { + sas_target_priv_data = sas_device->starget->hostdata; + sas_target_priv_data->deleted = 1; + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + if (ioc->remove_host) + goto out; + + /* Target Reset to flush out all the outstanding IO */ + device_handle = (sas_device->hidden_raid_component) ? + sas_device->volume_handle : handle; + if (device_handle) { + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "issue target reset: " + "handle(0x%04x)\n", ioc->name, device_handle)); + mutex_lock(&ioc->tm_cmds.mutex); + mpt2sas_scsih_issue_tm(ioc, device_handle, 0, + MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 10); + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->tm_cmds.mutex); + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "issue target reset " + "done: handle(0x%04x)\n", ioc->name, device_handle)); + } + + /* SAS_IO_UNIT_CNTR - send REMOVE_DEVICE */ + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "sas_iounit: handle" + "(0x%04x)\n", ioc->name, handle)); + memset(&mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t)); + mpi_request.Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL; + mpi_request.Operation = MPI2_SAS_OP_REMOVE_DEVICE; + mpi_request.DevHandle = handle; + mpi_request.VF_ID = 0; + if ((mpt2sas_base_sas_iounit_control(ioc, &mpi_reply, + &mpi_request)) != 0) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + } + + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "sas_iounit: ioc_status" + "(0x%04x), loginfo(0x%08x)\n", ioc->name, + le16_to_cpu(mpi_reply.IOCStatus), + le32_to_cpu(mpi_reply.IOCLogInfo))); + + out: + mpt2sas_transport_port_remove(ioc, sas_device->sas_address, + sas_device->parent_handle); + + printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), sas_addr" + "(0x%016llx)\n", ioc->name, sas_device->handle, + (unsigned long long) sas_device->sas_address); + _scsih_sas_device_remove(ioc, sas_device); + + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit: handle" + "(0x%04x)\n", ioc->name, __func__, handle)); +} + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _scsih_sas_topology_change_event_debug - debug for topology event + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + */ +static void +_scsih_sas_topology_change_event_debug(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventDataSasTopologyChangeList_t *event_data) +{ + int i; + u16 handle; + u16 reason_code; + u8 phy_number; + char *status_str = NULL; + char link_rate[25]; + + switch (event_data->ExpStatus) { + case MPI2_EVENT_SAS_TOPO_ES_ADDED: + status_str = "add"; + break; + case MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING: + status_str = "remove"; + break; + case MPI2_EVENT_SAS_TOPO_ES_RESPONDING: + status_str = "responding"; + break; + case MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING: + status_str = "remove delay"; + break; + default: + status_str = "unknown status"; + break; + } + printk(MPT2SAS_DEBUG_FMT "sas topology change: (%s)\n", + ioc->name, status_str); + printk(KERN_DEBUG "\thandle(0x%04x), enclosure_handle(0x%04x) " + "start_phy(%02d), count(%d)\n", + le16_to_cpu(event_data->ExpanderDevHandle), + le16_to_cpu(event_data->EnclosureHandle), + event_data->StartPhyNum, event_data->NumEntries); + for (i = 0; i < event_data->NumEntries; i++) { + handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); + if (!handle) + continue; + phy_number = event_data->StartPhyNum + i; + reason_code = event_data->PHY[i].PhyStatus & + MPI2_EVENT_SAS_TOPO_RC_MASK; + switch (reason_code) { + case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED: + snprintf(link_rate, 25, ": add, link(0x%02x)", + (event_data->PHY[i].LinkRate >> 4)); + status_str = link_rate; + break; + case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING: + status_str = ": remove"; + break; + case MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING: + status_str = ": remove_delay"; + break; + case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED: + snprintf(link_rate, 25, ": link(0x%02x)", + (event_data->PHY[i].LinkRate >> 4)); + status_str = link_rate; + break; + case MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE: + status_str = ": responding"; + break; + default: + status_str = ": unknown"; + break; + } + printk(KERN_DEBUG "\tphy(%02d), attached_handle(0x%04x)%s\n", + phy_number, handle, status_str); + } +} +#endif + +/** + * _scsih_sas_topology_change_event - handle topology changes + * @ioc: per adapter object + * @VF_ID: + * @event_data: event data payload + * fw_event: + * Context: user. + * + */ +static void +_scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataSasTopologyChangeList_t *event_data, + struct fw_event_work *fw_event) +{ + int i; + u16 parent_handle, handle; + u16 reason_code; + u8 phy_number; + struct _sas_node *sas_expander; + unsigned long flags; + u8 link_rate_; + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) + _scsih_sas_topology_change_event_debug(ioc, event_data); +#endif + + if (!ioc->sas_hba.num_phys) + _scsih_sas_host_add(ioc); + else + _scsih_sas_host_refresh(ioc, 0); + + if (fw_event->ignore) { + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ignoring expander " + "event\n", ioc->name)); + return; + } + + parent_handle = le16_to_cpu(event_data->ExpanderDevHandle); + + /* handle expander add */ + if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_ADDED) + if (_scsih_expander_add(ioc, parent_handle) != 0) + return; + + /* handle siblings events */ + for (i = 0; i < event_data->NumEntries; i++) { + if (fw_event->ignore) { + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ignoring " + "expander event\n", ioc->name)); + return; + } + if (event_data->PHY[i].PhyStatus & + MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT) + continue; + handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); + if (!handle) + continue; + phy_number = event_data->StartPhyNum + i; + reason_code = event_data->PHY[i].PhyStatus & + MPI2_EVENT_SAS_TOPO_RC_MASK; + link_rate_ = event_data->PHY[i].LinkRate >> 4; + switch (reason_code) { + case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED: + case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED: + if (!parent_handle) { + if (phy_number < ioc->sas_hba.num_phys) + _scsih_link_change(ioc, + ioc->sas_hba.phy[phy_number].handle, + handle, phy_number, link_rate_); + } else { + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_expander = + mpt2sas_scsih_expander_find_by_handle(ioc, + parent_handle); + spin_unlock_irqrestore(&ioc->sas_node_lock, + flags); + if (sas_expander) { + if (phy_number < sas_expander->num_phys) + _scsih_link_change(ioc, + sas_expander-> + phy[phy_number].handle, + handle, phy_number, + link_rate_); + } + } + if (reason_code == MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED) { + if (link_rate_ >= MPI2_SAS_NEG_LINK_RATE_1_5) + _scsih_ublock_io_device(ioc, handle); + } + if (reason_code == MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED) { + if (link_rate_ < MPI2_SAS_NEG_LINK_RATE_1_5) + break; + _scsih_add_device(ioc, handle, phy_number, 0); + } + break; + case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING: + _scsih_remove_device(ioc, handle); + break; + } + } + + /* handle expander removal */ + if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING) + _scsih_expander_remove(ioc, parent_handle); + +} + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _scsih_sas_device_status_change_event_debug - debug for device event + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_device_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventDataSasDeviceStatusChange_t *event_data) +{ + char *reason_str = NULL; + + switch (event_data->ReasonCode) { + case MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA: + reason_str = "smart data"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED: + reason_str = "unsupported device discovered"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET: + reason_str = "internal device reset"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL: + reason_str = "internal task abort"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL: + reason_str = "internal task abort set"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL: + reason_str = "internal clear task set"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL: + reason_str = "internal query task"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE: + reason_str = "sata init failure"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET: + reason_str = "internal device reset complete"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL: + reason_str = "internal task abort complete"; + break; + case MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION: + reason_str = "internal async notification"; + break; + default: + reason_str = "unknown reason"; + break; + } + printk(MPT2SAS_DEBUG_FMT "device status change: (%s)\n" + "\thandle(0x%04x), sas address(0x%016llx)", ioc->name, + reason_str, le16_to_cpu(event_data->DevHandle), + (unsigned long long)le64_to_cpu(event_data->SASAddress)); + if (event_data->ReasonCode == MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA) + printk(MPT2SAS_DEBUG_FMT ", ASC(0x%x), ASCQ(0x%x)\n", ioc->name, + event_data->ASC, event_data->ASCQ); + printk(KERN_INFO "\n"); +} +#endif + +/** + * _scsih_sas_device_status_change_event - handle device status change + * @ioc: per adapter object + * @VF_ID: + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataSasDeviceStatusChange_t *event_data) +{ +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) + _scsih_sas_device_status_change_event_debug(ioc, event_data); +#endif +} + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _scsih_sas_enclosure_dev_status_change_event_debug - debug for enclosure event + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_enclosure_dev_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventDataSasEnclDevStatusChange_t *event_data) +{ + char *reason_str = NULL; + + switch (event_data->ReasonCode) { + case MPI2_EVENT_SAS_ENCL_RC_ADDED: + reason_str = "enclosure add"; + break; + case MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING: + reason_str = "enclosure remove"; + break; + default: + reason_str = "unknown reason"; + break; + } + + printk(MPT2SAS_DEBUG_FMT "enclosure status change: (%s)\n" + "\thandle(0x%04x), enclosure logical id(0x%016llx)" + " number slots(%d)\n", ioc->name, reason_str, + le16_to_cpu(event_data->EnclosureHandle), + (unsigned long long)le64_to_cpu(event_data->EnclosureLogicalID), + le16_to_cpu(event_data->StartSlot)); +} +#endif + +/** + * _scsih_sas_enclosure_dev_status_change_event - handle enclosure events + * @ioc: per adapter object + * @VF_ID: + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_enclosure_dev_status_change_event(struct MPT2SAS_ADAPTER *ioc, + u8 VF_ID, Mpi2EventDataSasEnclDevStatusChange_t *event_data) +{ +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) + _scsih_sas_enclosure_dev_status_change_event_debug(ioc, + event_data); +#endif +} + +/** + * _scsih_sas_broadcast_primative_event - handle broadcast events + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataSasBroadcastPrimitive_t *event_data) +{ + struct scsi_cmnd *scmd; + u16 smid, handle; + u32 lun; + struct MPT2SAS_DEVICE *sas_device_priv_data; + u32 termination_count; + u32 query_count; + Mpi2SCSITaskManagementReply_t *mpi_reply; + + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "broadcast primative: " + "phy number(%d), width(%d)\n", ioc->name, event_data->PhyNum, + event_data->PortWidth)); + + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name, + __func__)); + + mutex_lock(&ioc->tm_cmds.mutex); + termination_count = 0; + query_count = 0; + mpi_reply = ioc->tm_cmds.reply; + for (smid = 1; smid <= ioc->request_depth; smid++) { + scmd = _scsih_scsi_lookup_get(ioc, smid); + if (!scmd) + continue; + sas_device_priv_data = scmd->device->hostdata; + if (!sas_device_priv_data || !sas_device_priv_data->sas_target) + continue; + /* skip hidden raid components */ + if (sas_device_priv_data->sas_target->flags & + MPT_TARGET_FLAGS_RAID_COMPONENT) + continue; + /* skip volumes */ + if (sas_device_priv_data->sas_target->flags & + MPT_TARGET_FLAGS_VOLUME) + continue; + + handle = sas_device_priv_data->sas_target->handle; + lun = sas_device_priv_data->lun; + query_count++; + + mpt2sas_scsih_issue_tm(ioc, handle, lun, + MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30); + termination_count += le32_to_cpu(mpi_reply->TerminationCount); + + if ((mpi_reply->IOCStatus == MPI2_IOCSTATUS_SUCCESS) && + (mpi_reply->ResponseCode == + MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED || + mpi_reply->ResponseCode == + MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC)) + continue; + + mpt2sas_scsih_issue_tm(ioc, handle, lun, + MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, smid, 30); + termination_count += le32_to_cpu(mpi_reply->TerminationCount); + } + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; + ioc->broadcast_aen_busy = 0; + mutex_unlock(&ioc->tm_cmds.mutex); + + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "%s - exit, query_count = %d termination_count = %d\n", + ioc->name, __func__, query_count, termination_count)); +} + +/** + * _scsih_sas_discovery_event - handle discovery events + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_discovery_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataSasDiscovery_t *event_data) +{ +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) { + printk(MPT2SAS_DEBUG_FMT "discovery event: (%s)", ioc->name, + (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ? + "start" : "stop"); + if (event_data->DiscoveryStatus) + printk(MPT2SAS_DEBUG_FMT ", discovery_status(0x%08x)", + ioc->name, le32_to_cpu(event_data->DiscoveryStatus)); + printk("\n"); + } +#endif + + if (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED && + !ioc->sas_hba.num_phys) + _scsih_sas_host_add(ioc); +} + +/** + * _scsih_reprobe_lun - reprobing lun + * @sdev: scsi device struct + * @no_uld_attach: sdev->no_uld_attach flag setting + * + **/ +static void +_scsih_reprobe_lun(struct scsi_device *sdev, void *no_uld_attach) +{ + int rc; + + sdev->no_uld_attach = no_uld_attach ? 1 : 0; + sdev_printk(KERN_INFO, sdev, "%s raid component\n", + sdev->no_uld_attach ? "hidding" : "exposing"); + rc = scsi_device_reprobe(sdev); +} + +/** + * _scsih_reprobe_target - reprobing target + * @starget: scsi target struct + * @no_uld_attach: sdev->no_uld_attach flag setting + * + * Note: no_uld_attach flag determines whether the disk device is attached + * to block layer. A value of `1` means to not attach. + **/ +static void +_scsih_reprobe_target(struct scsi_target *starget, int no_uld_attach) +{ + struct MPT2SAS_TARGET *sas_target_priv_data = starget->hostdata; + + if (no_uld_attach) + sas_target_priv_data->flags |= MPT_TARGET_FLAGS_RAID_COMPONENT; + else + sas_target_priv_data->flags &= ~MPT_TARGET_FLAGS_RAID_COMPONENT; + + starget_for_each_device(starget, no_uld_attach ? (void *)1 : NULL, + _scsih_reprobe_lun); +} +/** + * _scsih_sas_volume_add - add new volume + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_volume_add(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + struct _raid_device *raid_device; + unsigned long flags; + u64 wwid; + u16 handle = le16_to_cpu(element->VolDevHandle); + int rc; + +#if 0 /* RAID_HACKS */ + if (le32_to_cpu(event_data->Flags) & + MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) + return; +#endif + + mpt2sas_config_get_volume_wwid(ioc, handle, &wwid); + if (!wwid) { + printk(MPT2SAS_ERR_FMT + "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__); + return; + } + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_wwid(ioc, wwid); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + + if (raid_device) + return; + + raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL); + if (!raid_device) { + printk(MPT2SAS_ERR_FMT + "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__); + return; + } + + raid_device->id = ioc->sas_id++; + raid_device->channel = RAID_CHANNEL; + raid_device->handle = handle; + raid_device->wwid = wwid; + _scsih_raid_device_add(ioc, raid_device); + if (!ioc->wait_for_port_enable_to_complete) { + rc = scsi_add_device(ioc->shost, RAID_CHANNEL, + raid_device->id, 0); + if (rc) + _scsih_raid_device_remove(ioc, raid_device); + } else + _scsih_determine_boot_device(ioc, raid_device, 1); +} + +/** + * _scsih_sas_volume_delete - delete volume + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_volume_delete(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + struct _raid_device *raid_device; + u16 handle = le16_to_cpu(element->VolDevHandle); + unsigned long flags; + struct MPT2SAS_TARGET *sas_target_priv_data; + +#if 0 /* RAID_HACKS */ + if (le32_to_cpu(event_data->Flags) & + MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) + return; +#endif + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + if (!raid_device) + return; + if (raid_device->starget) { + sas_target_priv_data = raid_device->starget->hostdata; + sas_target_priv_data->deleted = 1; + scsi_remove_target(&raid_device->starget->dev); + } + _scsih_raid_device_remove(ioc, raid_device); +} + +/** + * _scsih_sas_pd_expose - expose pd component to /dev/sdX + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_pd_expose(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + struct _sas_device *sas_device; + unsigned long flags; + u16 handle = le16_to_cpu(element->PhysDiskDevHandle); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (!sas_device) + return; + + /* exposing raid component */ + sas_device->volume_handle = 0; + sas_device->volume_wwid = 0; + sas_device->hidden_raid_component = 0; + _scsih_reprobe_target(sas_device->starget, 0); +} + +/** + * _scsih_sas_pd_hide - hide pd component from /dev/sdX + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_pd_hide(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + struct _sas_device *sas_device; + unsigned long flags; + u16 handle = le16_to_cpu(element->PhysDiskDevHandle); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (!sas_device) + return; + + /* hiding raid component */ + mpt2sas_config_get_volume_handle(ioc, handle, + &sas_device->volume_handle); + mpt2sas_config_get_volume_wwid(ioc, sas_device->volume_handle, + &sas_device->volume_wwid); + sas_device->hidden_raid_component = 1; + _scsih_reprobe_target(sas_device->starget, 1); +} + +/** + * _scsih_sas_pd_delete - delete pd component + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_pd_delete(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + struct _sas_device *sas_device; + unsigned long flags; + u16 handle = le16_to_cpu(element->PhysDiskDevHandle); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (!sas_device) + return; + _scsih_remove_device(ioc, handle); +} + +/** + * _scsih_sas_pd_add - remove pd component + * @ioc: per adapter object + * @element: IR config element data + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_pd_add(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventIrConfigElement_t *element) +{ + struct _sas_device *sas_device; + unsigned long flags; + u16 handle = le16_to_cpu(element->PhysDiskDevHandle); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (sas_device) + sas_device->hidden_raid_component = 1; + else + _scsih_add_device(ioc, handle, 0, 1); +} + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _scsih_sas_ir_config_change_event_debug - debug for IR Config Change events + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_config_change_event_debug(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventDataIrConfigChangeList_t *event_data) +{ + Mpi2EventIrConfigElement_t *element; + u8 element_type; + int i; + char *reason_str = NULL, *element_str = NULL; + + element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; + + printk(MPT2SAS_DEBUG_FMT "raid config change: (%s), elements(%d)\n", + ioc->name, (le32_to_cpu(event_data->Flags) & + MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? + "foreign" : "native", event_data->NumElements); + for (i = 0; i < event_data->NumElements; i++, element++) { + switch (element->ReasonCode) { + case MPI2_EVENT_IR_CHANGE_RC_ADDED: + reason_str = "add"; + break; + case MPI2_EVENT_IR_CHANGE_RC_REMOVED: + reason_str = "remove"; + break; + case MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE: + reason_str = "no change"; + break; + case MPI2_EVENT_IR_CHANGE_RC_HIDE: + reason_str = "hide"; + break; + case MPI2_EVENT_IR_CHANGE_RC_UNHIDE: + reason_str = "unhide"; + break; + case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED: + reason_str = "volume_created"; + break; + case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED: + reason_str = "volume_deleted"; + break; + case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED: + reason_str = "pd_created"; + break; + case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED: + reason_str = "pd_deleted"; + break; + default: + reason_str = "unknown reason"; + break; + } + element_type = le16_to_cpu(element->ElementFlags) & + MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK; + switch (element_type) { + case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT: + element_str = "volume"; + break; + case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT: + element_str = "phys disk"; + break; + case MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT: + element_str = "hot spare"; + break; + default: + element_str = "unknown element"; + break; + } + printk(KERN_DEBUG "\t(%s:%s), vol handle(0x%04x), " + "pd handle(0x%04x), pd num(0x%02x)\n", element_str, + reason_str, le16_to_cpu(element->VolDevHandle), + le16_to_cpu(element->PhysDiskDevHandle), + element->PhysDiskNum); + } +} +#endif + +/** + * _scsih_sas_ir_config_change_event - handle ir configuration change events + * @ioc: per adapter object + * @VF_ID: + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataIrConfigChangeList_t *event_data) +{ + Mpi2EventIrConfigElement_t *element; + int i; + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) + _scsih_sas_ir_config_change_event_debug(ioc, event_data); + +#endif + + element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; + for (i = 0; i < event_data->NumElements; i++, element++) { + + switch (element->ReasonCode) { + case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED: + case MPI2_EVENT_IR_CHANGE_RC_ADDED: + _scsih_sas_volume_add(ioc, element); + break; + case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED: + case MPI2_EVENT_IR_CHANGE_RC_REMOVED: + _scsih_sas_volume_delete(ioc, element); + break; + case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED: + _scsih_sas_pd_hide(ioc, element); + break; + case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED: + _scsih_sas_pd_expose(ioc, element); + break; + case MPI2_EVENT_IR_CHANGE_RC_HIDE: + _scsih_sas_pd_add(ioc, element); + break; + case MPI2_EVENT_IR_CHANGE_RC_UNHIDE: + _scsih_sas_pd_delete(ioc, element); + break; + } + } +} + +/** + * _scsih_sas_ir_volume_event - IR volume event + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataIrVolume_t *event_data) +{ + u64 wwid; + unsigned long flags; + struct _raid_device *raid_device; + u16 handle; + u32 state; + int rc; + struct MPT2SAS_TARGET *sas_target_priv_data; + + if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED) + return; + + handle = le16_to_cpu(event_data->VolDevHandle); + state = le32_to_cpu(event_data->NewValue); + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle(0x%04x), " + "old(0x%08x), new(0x%08x)\n", ioc->name, __func__, handle, + le32_to_cpu(event_data->PreviousValue), state)); + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + + switch (state) { + case MPI2_RAID_VOL_STATE_MISSING: + case MPI2_RAID_VOL_STATE_FAILED: + if (!raid_device) + break; + if (raid_device->starget) { + sas_target_priv_data = raid_device->starget->hostdata; + sas_target_priv_data->deleted = 1; + scsi_remove_target(&raid_device->starget->dev); + } + _scsih_raid_device_remove(ioc, raid_device); + break; + + case MPI2_RAID_VOL_STATE_ONLINE: + case MPI2_RAID_VOL_STATE_DEGRADED: + case MPI2_RAID_VOL_STATE_OPTIMAL: + if (raid_device) + break; + + mpt2sas_config_get_volume_wwid(ioc, handle, &wwid); + if (!wwid) { + printk(MPT2SAS_ERR_FMT + "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__); + break; + } + + raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL); + if (!raid_device) { + printk(MPT2SAS_ERR_FMT + "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__); + break; + } + + raid_device->id = ioc->sas_id++; + raid_device->channel = RAID_CHANNEL; + raid_device->handle = handle; + raid_device->wwid = wwid; + _scsih_raid_device_add(ioc, raid_device); + rc = scsi_add_device(ioc->shost, RAID_CHANNEL, + raid_device->id, 0); + if (rc) + _scsih_raid_device_remove(ioc, raid_device); + break; + + case MPI2_RAID_VOL_STATE_INITIALIZING: + default: + break; + } +} + +/** + * _scsih_sas_ir_physical_disk_event - PD event + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataIrPhysicalDisk_t *event_data) +{ + u16 handle; + u32 state; + struct _sas_device *sas_device; + unsigned long flags; + + if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED) + return; + + handle = le16_to_cpu(event_data->PhysDiskDevHandle); + state = le32_to_cpu(event_data->NewValue); + + dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle(0x%04x), " + "old(0x%08x), new(0x%08x)\n", ioc->name, __func__, handle, + le32_to_cpu(event_data->PreviousValue), state)); + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + switch (state) { +#if 0 + case MPI2_RAID_PD_STATE_OFFLINE: + if (sas_device) + _scsih_remove_device(ioc, handle); + break; +#endif + case MPI2_RAID_PD_STATE_ONLINE: + case MPI2_RAID_PD_STATE_DEGRADED: + case MPI2_RAID_PD_STATE_REBUILDING: + case MPI2_RAID_PD_STATE_OPTIMAL: + if (sas_device) + sas_device->hidden_raid_component = 1; + else + _scsih_add_device(ioc, handle, 0, 1); + break; + + case MPI2_RAID_PD_STATE_NOT_CONFIGURED: + case MPI2_RAID_PD_STATE_NOT_COMPATIBLE: + case MPI2_RAID_PD_STATE_HOT_SPARE: + default: + break; + } +} + +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING +/** + * _scsih_sas_ir_operation_status_event_debug - debug for IR op event + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_operation_status_event_debug(struct MPT2SAS_ADAPTER *ioc, + Mpi2EventDataIrOperationStatus_t *event_data) +{ + char *reason_str = NULL; + + switch (event_data->RAIDOperation) { + case MPI2_EVENT_IR_RAIDOP_RESYNC: + reason_str = "resync"; + break; + case MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION: + reason_str = "online capacity expansion"; + break; + case MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK: + reason_str = "consistency check"; + break; + default: + reason_str = "unknown reason"; + break; + } + + printk(MPT2SAS_INFO_FMT "raid operational status: (%s)" + "\thandle(0x%04x), percent complete(%d)\n", + ioc->name, reason_str, + le16_to_cpu(event_data->VolDevHandle), + event_data->PercentComplete); +} +#endif + +/** + * _scsih_sas_ir_operation_status_event - handle RAID operation events + * @ioc: per adapter object + * @VF_ID: + * @event_data: event data payload + * Context: user. + * + * Return nothing. + */ +static void +_scsih_sas_ir_operation_status_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataIrOperationStatus_t *event_data) +{ +#ifdef CONFIG_SCSI_MPT2SAS_LOGGING + if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) + _scsih_sas_ir_operation_status_event_debug(ioc, event_data); +#endif +} + +/** + * _scsih_task_set_full - handle task set full + * @ioc: per adapter object + * @event_data: event data payload + * Context: user. + * + * Throttle back qdepth. + */ +static void +_scsih_task_set_full(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, + Mpi2EventDataTaskSetFull_t *event_data) +{ + unsigned long flags; + struct _sas_device *sas_device; + static struct _raid_device *raid_device; + struct scsi_device *sdev; + int depth; + u16 current_depth; + u16 handle; + int id, channel; + u64 sas_address; + + current_depth = le16_to_cpu(event_data->CurrentDepth); + handle = le16_to_cpu(event_data->DevHandle); + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + if (!sas_device) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return; + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + id = sas_device->id; + channel = sas_device->channel; + sas_address = sas_device->sas_address; + + /* if hidden raid component, then change to volume characteristics */ + if (sas_device->hidden_raid_component && sas_device->volume_handle) { + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_handle( + ioc, sas_device->volume_handle); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + if (raid_device) { + id = raid_device->id; + channel = raid_device->channel; + handle = raid_device->handle; + sas_address = raid_device->wwid; + } + } + + if (ioc->logging_level & MPT_DEBUG_TASK_SET_FULL) + starget_printk(KERN_DEBUG, sas_device->starget, "task set " + "full: handle(0x%04x), sas_addr(0x%016llx), depth(%d)\n", + handle, (unsigned long long)sas_address, current_depth); + + shost_for_each_device(sdev, ioc->shost) { + if (sdev->id == id && sdev->channel == channel) { + if (current_depth > sdev->queue_depth) { + if (ioc->logging_level & + MPT_DEBUG_TASK_SET_FULL) + sdev_printk(KERN_INFO, sdev, "strange " + "observation, the queue depth is" + " (%d) meanwhile fw queue depth " + "is (%d)\n", sdev->queue_depth, + current_depth); + continue; + } + depth = scsi_track_queue_full(sdev, + current_depth - 1); + if (depth > 0) + sdev_printk(KERN_INFO, sdev, "Queue depth " + "reduced to (%d)\n", depth); + else if (depth < 0) + sdev_printk(KERN_INFO, sdev, "Tagged Command " + "Queueing is being disabled\n"); + else if (depth == 0) + if (ioc->logging_level & + MPT_DEBUG_TASK_SET_FULL) + sdev_printk(KERN_INFO, sdev, + "Queue depth not changed yet\n"); + } + } +} + +/** + * _scsih_mark_responding_sas_device - mark a sas_devices as responding + * @ioc: per adapter object + * @sas_address: sas address + * @slot: enclosure slot id + * @handle: device handle + * + * After host reset, find out whether devices are still responding. + * Used in _scsi_remove_unresponsive_sas_devices. + * + * Return nothing. + */ +static void +_scsih_mark_responding_sas_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, + u16 slot, u16 handle) +{ + struct MPT2SAS_TARGET *sas_target_priv_data; + struct scsi_target *starget; + struct _sas_device *sas_device; + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_for_each_entry(sas_device, &ioc->sas_device_list, list) { + if (sas_device->sas_address == sas_address && + sas_device->slot == slot && sas_device->starget) { + sas_device->responding = 1; + starget_printk(KERN_INFO, sas_device->starget, + "handle(0x%04x), sas_addr(0x%016llx), enclosure " + "logical id(0x%016llx), slot(%d)\n", handle, + (unsigned long long)sas_device->sas_address, + (unsigned long long) + sas_device->enclosure_logical_id, + sas_device->slot); + if (sas_device->handle == handle) + goto out; + printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n", + sas_device->handle); + sas_device->handle = handle; + starget = sas_device->starget; + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->handle = handle; + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); +} + +/** + * _scsih_search_responding_sas_devices - + * @ioc: per adapter object + * + * After host reset, find out whether devices are still responding. + * If not remove. + * + * Return nothing. + */ +static void +_scsih_search_responding_sas_devices(struct MPT2SAS_ADAPTER *ioc) +{ + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2ConfigReply_t mpi_reply; + u16 ioc_status; + __le64 sas_address; + u16 handle; + u32 device_info; + u16 slot; + + printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__); + + if (list_empty(&ioc->sas_device_list)) + return; + + handle = 0xFFFF; + while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, + &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE, + handle))) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + handle = le16_to_cpu(sas_device_pg0.DevHandle); + device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); + if (!(_scsih_is_end_device(device_info))) + continue; + sas_address = le64_to_cpu(sas_device_pg0.SASAddress); + slot = le16_to_cpu(sas_device_pg0.Slot); + _scsih_mark_responding_sas_device(ioc, sas_address, slot, + handle); + } +} + +/** + * _scsih_mark_responding_raid_device - mark a raid_device as responding + * @ioc: per adapter object + * @wwid: world wide identifier for raid volume + * @handle: device handle + * + * After host reset, find out whether devices are still responding. + * Used in _scsi_remove_unresponsive_raid_devices. + * + * Return nothing. + */ +static void +_scsih_mark_responding_raid_device(struct MPT2SAS_ADAPTER *ioc, u64 wwid, + u16 handle) +{ + struct MPT2SAS_TARGET *sas_target_priv_data; + struct scsi_target *starget; + struct _raid_device *raid_device; + unsigned long flags; + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + list_for_each_entry(raid_device, &ioc->raid_device_list, list) { + if (raid_device->wwid == wwid && raid_device->starget) { + raid_device->responding = 1; + starget_printk(KERN_INFO, raid_device->starget, + "handle(0x%04x), wwid(0x%016llx)\n", handle, + (unsigned long long)raid_device->wwid); + if (raid_device->handle == handle) + goto out; + printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n", + raid_device->handle); + raid_device->handle = handle; + starget = raid_device->starget; + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->handle = handle; + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); +} + +/** + * _scsih_search_responding_raid_devices - + * @ioc: per adapter object + * + * After host reset, find out whether devices are still responding. + * If not remove. + * + * Return nothing. + */ +static void +_scsih_search_responding_raid_devices(struct MPT2SAS_ADAPTER *ioc) +{ + Mpi2RaidVolPage1_t volume_pg1; + Mpi2ConfigReply_t mpi_reply; + u16 ioc_status; + u16 handle; + + printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__); + + if (list_empty(&ioc->raid_device_list)) + return; + + handle = 0xFFFF; + while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply, + &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + handle = le16_to_cpu(volume_pg1.DevHandle); + _scsih_mark_responding_raid_device(ioc, + le64_to_cpu(volume_pg1.WWID), handle); + } +} + +/** + * _scsih_mark_responding_expander - mark a expander as responding + * @ioc: per adapter object + * @sas_address: sas address + * @handle: + * + * After host reset, find out whether devices are still responding. + * Used in _scsi_remove_unresponsive_expanders. + * + * Return nothing. + */ +static void +_scsih_mark_responding_expander(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, + u16 handle) +{ + struct _sas_node *sas_expander; + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) { + if (sas_expander->sas_address == sas_address) { + sas_expander->responding = 1; + if (sas_expander->handle != handle) { + printk(KERN_INFO "old handle(0x%04x)\n", + sas_expander->handle); + sas_expander->handle = handle; + } + goto out; + } + } + out: + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); +} + +/** + * _scsih_search_responding_expanders - + * @ioc: per adapter object + * + * After host reset, find out whether devices are still responding. + * If not remove. + * + * Return nothing. + */ +static void +_scsih_search_responding_expanders(struct MPT2SAS_ADAPTER *ioc) +{ + Mpi2ExpanderPage0_t expander_pg0; + Mpi2ConfigReply_t mpi_reply; + u16 ioc_status; + __le64 sas_address; + u16 handle; + + printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__); + + if (list_empty(&ioc->sas_expander_list)) + return; + + handle = 0xFFFF; + while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0, + MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) { + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + + handle = le16_to_cpu(expander_pg0.DevHandle); + sas_address = le64_to_cpu(expander_pg0.SASAddress); + printk(KERN_INFO "\texpander present: handle(0x%04x), " + "sas_addr(0x%016llx)\n", handle, + (unsigned long long)sas_address); + _scsih_mark_responding_expander(ioc, sas_address, handle); + } + +} + +/** + * _scsih_remove_unresponding_devices - removing unresponding devices + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_scsih_remove_unresponding_devices(struct MPT2SAS_ADAPTER *ioc) +{ + struct _sas_device *sas_device, *sas_device_next; + struct _sas_node *sas_expander, *sas_expander_next; + struct _raid_device *raid_device, *raid_device_next; + unsigned long flags; + + _scsih_search_responding_sas_devices(ioc); + _scsih_search_responding_raid_devices(ioc); + _scsih_search_responding_expanders(ioc); + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + ioc->shost_recovery = 0; + if (ioc->shost->shost_state == SHOST_RECOVERY) { + printk(MPT2SAS_INFO_FMT "putting controller into " + "SHOST_RUNNING\n", ioc->name); + scsi_host_set_state(ioc->shost, SHOST_RUNNING); + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + list_for_each_entry_safe(sas_device, sas_device_next, + &ioc->sas_device_list, list) { + if (sas_device->responding) { + sas_device->responding = 0; + continue; + } + if (sas_device->starget) + starget_printk(KERN_INFO, sas_device->starget, + "removing: handle(0x%04x), sas_addr(0x%016llx), " + "enclosure logical id(0x%016llx), slot(%d)\n", + sas_device->handle, + (unsigned long long)sas_device->sas_address, + (unsigned long long) + sas_device->enclosure_logical_id, + sas_device->slot); + _scsih_remove_device(ioc, sas_device->handle); + } + + list_for_each_entry_safe(raid_device, raid_device_next, + &ioc->raid_device_list, list) { + if (raid_device->responding) { + raid_device->responding = 0; + continue; + } + if (raid_device->starget) { + starget_printk(KERN_INFO, raid_device->starget, + "removing: handle(0x%04x), wwid(0x%016llx)\n", + raid_device->handle, + (unsigned long long)raid_device->wwid); + scsi_remove_target(&raid_device->starget->dev); + } + _scsih_raid_device_remove(ioc, raid_device); + } + + list_for_each_entry_safe(sas_expander, sas_expander_next, + &ioc->sas_expander_list, list) { + if (sas_expander->responding) { + sas_expander->responding = 0; + continue; + } + printk("\tremoving expander: handle(0x%04x), " + " sas_addr(0x%016llx)\n", sas_expander->handle, + (unsigned long long)sas_expander->sas_address); + _scsih_expander_remove(ioc, sas_expander->handle); + } +} + +/** + * _firmware_event_work - delayed task for processing firmware events + * @ioc: per adapter object + * @work: equal to the fw_event_work object + * Context: user. + * + * Return nothing. + */ +static void +_firmware_event_work(struct work_struct *work) +{ + struct fw_event_work *fw_event = container_of(work, + struct fw_event_work, work.work); + unsigned long flags; + struct MPT2SAS_ADAPTER *ioc = fw_event->ioc; + + /* This is invoked by calling _scsih_queue_rescan(). */ + if (fw_event->event == MPT2SAS_RESCAN_AFTER_HOST_RESET) { + _scsih_fw_event_free(ioc, fw_event); + _scsih_sas_host_refresh(ioc, 1); + _scsih_remove_unresponding_devices(ioc); + return; + } + + /* the queue is being flushed so ignore this event */ + spin_lock_irqsave(&ioc->fw_event_lock, flags); + if (ioc->fw_events_off || ioc->remove_host) { + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + _scsih_fw_event_free(ioc, fw_event); + return; + } + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->shost_recovery) { + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + _scsih_fw_event_requeue(ioc, fw_event, 1000); + return; + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + switch (fw_event->event) { + case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: + _scsih_sas_topology_change_event(ioc, fw_event->VF_ID, + fw_event->event_data, fw_event); + break; + case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: + _scsih_sas_device_status_change_event(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + case MPI2_EVENT_SAS_DISCOVERY: + _scsih_sas_discovery_event(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: + _scsih_sas_broadcast_primative_event(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: + _scsih_sas_enclosure_dev_status_change_event(ioc, + fw_event->VF_ID, fw_event->event_data); + break; + case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: + _scsih_sas_ir_config_change_event(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + case MPI2_EVENT_IR_VOLUME: + _scsih_sas_ir_volume_event(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + case MPI2_EVENT_IR_PHYSICAL_DISK: + _scsih_sas_ir_physical_disk_event(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + case MPI2_EVENT_IR_OPERATION_STATUS: + _scsih_sas_ir_operation_status_event(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + case MPI2_EVENT_TASK_SET_FULL: + _scsih_task_set_full(ioc, fw_event->VF_ID, + fw_event->event_data); + break; + } + _scsih_fw_event_free(ioc, fw_event); +} + +/** + * mpt2sas_scsih_event_callback - firmware event handler (called at ISR time) + * @ioc: per adapter object + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * Context: interrupt. + * + * This function merely adds a new work task into ioc->firmware_event_thread. + * The tasks are worked from _firmware_event_work in user context. + * + * Return nothing. + */ +void +mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply) +{ + struct fw_event_work *fw_event; + Mpi2EventNotificationReply_t *mpi_reply; + unsigned long flags; + u16 event; + + /* events turned off due to host reset or driver unloading */ + spin_lock_irqsave(&ioc->fw_event_lock, flags); + if (ioc->fw_events_off || ioc->remove_host) { + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + return; + } + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + event = le16_to_cpu(mpi_reply->Event); + + switch (event) { + /* handle these */ + case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: + { + Mpi2EventDataSasBroadcastPrimitive_t *baen_data = + (Mpi2EventDataSasBroadcastPrimitive_t *) + mpi_reply->EventData; + + if (baen_data->Primitive != + MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT || + ioc->broadcast_aen_busy) + return; + ioc->broadcast_aen_busy = 1; + break; + } + + case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: + _scsih_check_topo_delete_events(ioc, + (Mpi2EventDataSasTopologyChangeList_t *) + mpi_reply->EventData); + break; + + case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: + case MPI2_EVENT_IR_OPERATION_STATUS: + case MPI2_EVENT_SAS_DISCOVERY: + case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: + case MPI2_EVENT_IR_VOLUME: + case MPI2_EVENT_IR_PHYSICAL_DISK: + case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: + case MPI2_EVENT_TASK_SET_FULL: + break; + + default: /* ignore the rest */ + return; + } + + fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); + if (!fw_event) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + fw_event->event_data = + kzalloc(mpi_reply->EventDataLength*4, GFP_ATOMIC); + if (!fw_event->event_data) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + kfree(fw_event); + return; + } + + memcpy(fw_event->event_data, mpi_reply->EventData, + mpi_reply->EventDataLength*4); + fw_event->ioc = ioc; + fw_event->VF_ID = VF_ID; + fw_event->event = event; + _scsih_fw_event_add(ioc, fw_event); +} + +/* shost template */ +static struct scsi_host_template scsih_driver_template = { + .module = THIS_MODULE, + .name = "Fusion MPT SAS Host", + .proc_name = MPT2SAS_DRIVER_NAME, + .queuecommand = scsih_qcmd, + .target_alloc = scsih_target_alloc, + .slave_alloc = scsih_slave_alloc, + .slave_configure = scsih_slave_configure, + .target_destroy = scsih_target_destroy, + .slave_destroy = scsih_slave_destroy, + .change_queue_depth = scsih_change_queue_depth, + .change_queue_type = scsih_change_queue_type, + .eh_abort_handler = scsih_abort, + .eh_device_reset_handler = scsih_dev_reset, + .eh_host_reset_handler = scsih_host_reset, + .bios_param = scsih_bios_param, + .can_queue = 1, + .this_id = -1, + .sg_tablesize = MPT2SAS_SG_DEPTH, + .max_sectors = 8192, + .cmd_per_lun = 7, + .use_clustering = ENABLE_CLUSTERING, + .shost_attrs = mpt2sas_host_attrs, + .sdev_attrs = mpt2sas_dev_attrs, +}; + +/** + * _scsih_expander_node_remove - removing expander device from list. + * @ioc: per adapter object + * @sas_expander: the sas_device object + * Context: Calling function should acquire ioc->sas_node_lock. + * + * Removing object and freeing associated memory from the + * ioc->sas_expander_list. + * + * Return nothing. + */ +static void +_scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc, + struct _sas_node *sas_expander) +{ + struct _sas_port *mpt2sas_port; + struct _sas_device *sas_device; + struct _sas_node *expander_sibling; + unsigned long flags; + + if (!sas_expander) + return; + + /* remove sibling ports attached to this expander */ + retry_device_search: + list_for_each_entry(mpt2sas_port, + &sas_expander->sas_port_list, port_list) { + if (mpt2sas_port->remote_identify.device_type == + SAS_END_DEVICE) { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = + mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + mpt2sas_port->remote_identify.sas_address); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (!sas_device) + continue; + _scsih_remove_device(ioc, sas_device->handle); + goto retry_device_search; + } + } + + retry_expander_search: + list_for_each_entry(mpt2sas_port, + &sas_expander->sas_port_list, port_list) { + + if (mpt2sas_port->remote_identify.device_type == + MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER || + mpt2sas_port->remote_identify.device_type == + MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) { + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + expander_sibling = + mpt2sas_scsih_expander_find_by_sas_address( + ioc, mpt2sas_port->remote_identify.sas_address); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + if (!expander_sibling) + continue; + _scsih_expander_remove(ioc, expander_sibling->handle); + goto retry_expander_search; + } + } + + mpt2sas_transport_port_remove(ioc, sas_expander->sas_address, + sas_expander->parent_handle); + + printk(MPT2SAS_INFO_FMT "expander_remove: handle" + "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, + sas_expander->handle, (unsigned long long) + sas_expander->sas_address); + + list_del(&sas_expander->list); + kfree(sas_expander->phy); + kfree(sas_expander); +} + +/** + * scsih_remove - detach and remove add host + * @pdev: PCI device struct + * + * Return nothing. + */ +static void __devexit +scsih_remove(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + struct _sas_port *mpt2sas_port; + struct _sas_device *sas_device; + struct _sas_node *expander_sibling; + struct workqueue_struct *wq; + unsigned long flags; + + ioc->remove_host = 1; + _scsih_fw_event_off(ioc); + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + wq = ioc->firmware_event_thread; + ioc->firmware_event_thread = NULL; + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + if (wq) + destroy_workqueue(wq); + + /* free ports attached to the sas_host */ + retry_again: + list_for_each_entry(mpt2sas_port, + &ioc->sas_hba.sas_port_list, port_list) { + if (mpt2sas_port->remote_identify.device_type == + SAS_END_DEVICE) { + sas_device = + mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + mpt2sas_port->remote_identify.sas_address); + if (sas_device) { + _scsih_remove_device(ioc, sas_device->handle); + goto retry_again; + } + } else { + expander_sibling = + mpt2sas_scsih_expander_find_by_sas_address(ioc, + mpt2sas_port->remote_identify.sas_address); + if (expander_sibling) { + _scsih_expander_remove(ioc, + expander_sibling->handle); + goto retry_again; + } + } + } + + /* free phys attached to the sas_host */ + if (ioc->sas_hba.num_phys) { + kfree(ioc->sas_hba.phy); + ioc->sas_hba.phy = NULL; + ioc->sas_hba.num_phys = 0; + } + + sas_remove_host(shost); + mpt2sas_base_detach(ioc); + list_del(&ioc->list); + scsi_remove_host(shost); + scsi_host_put(shost); +} + +/** + * _scsih_probe_boot_devices - reports 1st device + * @ioc: per adapter object + * + * If specified in bios page 2, this routine reports the 1st + * device scsi-ml or sas transport for persistent boot device + * purposes. Please refer to function _scsih_determine_boot_device() + */ +static void +_scsih_probe_boot_devices(struct MPT2SAS_ADAPTER *ioc) +{ + u8 is_raid; + void *device; + struct _sas_device *sas_device; + struct _raid_device *raid_device; + u16 handle, parent_handle; + u64 sas_address; + unsigned long flags; + int rc; + + device = NULL; + if (ioc->req_boot_device.device) { + device = ioc->req_boot_device.device; + is_raid = ioc->req_boot_device.is_raid; + } else if (ioc->req_alt_boot_device.device) { + device = ioc->req_alt_boot_device.device; + is_raid = ioc->req_alt_boot_device.is_raid; + } else if (ioc->current_boot_device.device) { + device = ioc->current_boot_device.device; + is_raid = ioc->current_boot_device.is_raid; + } + + if (!device) + return; + + if (is_raid) { + raid_device = device; + rc = scsi_add_device(ioc->shost, RAID_CHANNEL, + raid_device->id, 0); + if (rc) + _scsih_raid_device_remove(ioc, raid_device); + } else { + sas_device = device; + handle = sas_device->handle; + parent_handle = sas_device->parent_handle; + sas_address = sas_device->sas_address; + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_move_tail(&sas_device->list, &ioc->sas_device_list); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (!mpt2sas_transport_port_add(ioc, sas_device->handle, + sas_device->parent_handle)) { + _scsih_sas_device_remove(ioc, sas_device); + } else if (!sas_device->starget) { + mpt2sas_transport_port_remove(ioc, sas_address, + parent_handle); + _scsih_sas_device_remove(ioc, sas_device); + } + } +} + +/** + * _scsih_probe_raid - reporting raid volumes to scsi-ml + * @ioc: per adapter object + * + * Called during initial loading of the driver. + */ +static void +_scsih_probe_raid(struct MPT2SAS_ADAPTER *ioc) +{ + struct _raid_device *raid_device, *raid_next; + int rc; + + list_for_each_entry_safe(raid_device, raid_next, + &ioc->raid_device_list, list) { + if (raid_device->starget) + continue; + rc = scsi_add_device(ioc->shost, RAID_CHANNEL, + raid_device->id, 0); + if (rc) + _scsih_raid_device_remove(ioc, raid_device); + } +} + +/** + * _scsih_probe_sas - reporting raid volumes to sas transport + * @ioc: per adapter object + * + * Called during initial loading of the driver. + */ +static void +_scsih_probe_sas(struct MPT2SAS_ADAPTER *ioc) +{ + struct _sas_device *sas_device, *next; + unsigned long flags; + u16 handle, parent_handle; + u64 sas_address; + + /* SAS Device List */ + list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list, + list) { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_move_tail(&sas_device->list, &ioc->sas_device_list); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + handle = sas_device->handle; + parent_handle = sas_device->parent_handle; + sas_address = sas_device->sas_address; + if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) { + _scsih_sas_device_remove(ioc, sas_device); + } else if (!sas_device->starget) { + mpt2sas_transport_port_remove(ioc, sas_address, + parent_handle); + _scsih_sas_device_remove(ioc, sas_device); + } + } +} + +/** + * _scsih_probe_devices - probing for devices + * @ioc: per adapter object + * + * Called during initial loading of the driver. + */ +static void +_scsih_probe_devices(struct MPT2SAS_ADAPTER *ioc) +{ + u16 volume_mapping_flags = + le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) & + MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE; + + if (!(ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR)) + return; /* return when IOC doesn't support initiator mode */ + + _scsih_probe_boot_devices(ioc); + + if (ioc->ir_firmware) { + if ((volume_mapping_flags & + MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING)) { + _scsih_probe_sas(ioc); + _scsih_probe_raid(ioc); + } else { + _scsih_probe_raid(ioc); + _scsih_probe_sas(ioc); + } + } else + _scsih_probe_sas(ioc); +} + +/** + * scsih_probe - attach and add scsi host + * @pdev: PCI device struct + * @id: pci device id + * + * Returns 0 success, anything else error. + */ +static int +scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct MPT2SAS_ADAPTER *ioc; + struct Scsi_Host *shost; + + shost = scsi_host_alloc(&scsih_driver_template, + sizeof(struct MPT2SAS_ADAPTER)); + if (!shost) + return -ENODEV; + + /* init local params */ + ioc = shost_priv(shost); + memset(ioc, 0, sizeof(struct MPT2SAS_ADAPTER)); + INIT_LIST_HEAD(&ioc->list); + list_add_tail(&ioc->list, &mpt2sas_ioc_list); + ioc->shost = shost; + ioc->id = mpt_ids++; + sprintf(ioc->name, "%s%d", MPT2SAS_DRIVER_NAME, ioc->id); + ioc->pdev = pdev; + ioc->scsi_io_cb_idx = scsi_io_cb_idx; + ioc->tm_cb_idx = tm_cb_idx; + ioc->ctl_cb_idx = ctl_cb_idx; + ioc->base_cb_idx = base_cb_idx; + ioc->transport_cb_idx = transport_cb_idx; + ioc->config_cb_idx = config_cb_idx; + ioc->logging_level = logging_level; + /* misc semaphores and spin locks */ + spin_lock_init(&ioc->ioc_reset_in_progress_lock); + spin_lock_init(&ioc->scsi_lookup_lock); + spin_lock_init(&ioc->sas_device_lock); + spin_lock_init(&ioc->sas_node_lock); + spin_lock_init(&ioc->fw_event_lock); + spin_lock_init(&ioc->raid_device_lock); + + INIT_LIST_HEAD(&ioc->sas_device_list); + INIT_LIST_HEAD(&ioc->sas_device_init_list); + INIT_LIST_HEAD(&ioc->sas_expander_list); + INIT_LIST_HEAD(&ioc->fw_event_list); + INIT_LIST_HEAD(&ioc->raid_device_list); + INIT_LIST_HEAD(&ioc->sas_hba.sas_port_list); + + /* init shost parameters */ + shost->max_cmd_len = 16; + shost->max_lun = max_lun; + shost->transportt = mpt2sas_transport_template; + shost->unique_id = ioc->id; + + if ((scsi_add_host(shost, &pdev->dev))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + list_del(&ioc->list); + goto out_add_shost_fail; + } + + /* event thread */ + snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name), + "fw_event%d", ioc->id); + ioc->firmware_event_thread = create_singlethread_workqueue( + ioc->firmware_event_name); + if (!ioc->firmware_event_thread) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_thread_fail; + } + + ioc->wait_for_port_enable_to_complete = 1; + if ((mpt2sas_base_attach(ioc))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_attach_fail; + } + + ioc->wait_for_port_enable_to_complete = 0; + _scsih_probe_devices(ioc); + return 0; + + out_attach_fail: + destroy_workqueue(ioc->firmware_event_thread); + out_thread_fail: + list_del(&ioc->list); + scsi_remove_host(shost); + out_add_shost_fail: + return -ENODEV; +} + +#ifdef CONFIG_PM +/** + * scsih_suspend - power management suspend main entry point + * @pdev: PCI device struct + * @state: PM state change to (usually PCI_D3) + * + * Returns 0 success, anything else error. + */ +static int +scsih_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + u32 device_state; + + flush_scheduled_work(); + scsi_block_requests(shost); + device_state = pci_choose_state(pdev, state); + printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, entering " + "operating state [D%d]\n", ioc->name, pdev, + pci_name(pdev), device_state); + + mpt2sas_base_free_resources(ioc); + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, device_state); + return 0; +} + +/** + * scsih_resume - power management resume main entry point + * @pdev: PCI device struct + * + * Returns 0 success, anything else error. + */ +static int +scsih_resume(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + u32 device_state = pdev->current_state; + int r; + + printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, previous " + "operating state [D%d]\n", ioc->name, pdev, + pci_name(pdev), device_state); + + pci_set_power_state(pdev, PCI_D0); + pci_enable_wake(pdev, PCI_D0, 0); + pci_restore_state(pdev); + ioc->pdev = pdev; + r = mpt2sas_base_map_resources(ioc); + if (r) + return r; + + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, SOFT_RESET); + scsi_unblock_requests(shost); + return 0; +} +#endif /* CONFIG_PM */ + + +static struct pci_driver scsih_driver = { + .name = MPT2SAS_DRIVER_NAME, + .id_table = scsih_pci_table, + .probe = scsih_probe, + .remove = __devexit_p(scsih_remove), +#ifdef CONFIG_PM + .suspend = scsih_suspend, + .resume = scsih_resume, +#endif +}; + + +/** + * scsih_init - main entry point for this driver. + * + * Returns 0 success, anything else error. + */ +static int __init +scsih_init(void) +{ + int error; + + mpt_ids = 0; + printk(KERN_INFO "%s version %s loaded\n", MPT2SAS_DRIVER_NAME, + MPT2SAS_DRIVER_VERSION); + + mpt2sas_transport_template = + sas_attach_transport(&mpt2sas_transport_functions); + if (!mpt2sas_transport_template) + return -ENODEV; + + mpt2sas_base_initialize_callback_handler(); + + /* queuecommand callback hander */ + scsi_io_cb_idx = mpt2sas_base_register_callback_handler(scsih_io_done); + + /* task managment callback handler */ + tm_cb_idx = mpt2sas_base_register_callback_handler(scsih_tm_done); + + /* base internal commands callback handler */ + base_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_base_done); + + /* transport internal commands callback handler */ + transport_cb_idx = mpt2sas_base_register_callback_handler( + mpt2sas_transport_done); + + /* configuration page API internal commands callback handler */ + config_cb_idx = mpt2sas_base_register_callback_handler( + mpt2sas_config_done); + + /* ctl module callback handler */ + ctl_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_ctl_done); + + mpt2sas_ctl_init(); + + error = pci_register_driver(&scsih_driver); + if (error) + sas_release_transport(mpt2sas_transport_template); + + return error; +} + +/** + * scsih_exit - exit point for this driver (when it is a module). + * + * Returns 0 success, anything else error. + */ +static void __exit +scsih_exit(void) +{ + printk(KERN_INFO "mpt2sas version %s unloading\n", + MPT2SAS_DRIVER_VERSION); + + pci_unregister_driver(&scsih_driver); + + sas_release_transport(mpt2sas_transport_template); + mpt2sas_base_release_callback_handler(scsi_io_cb_idx); + mpt2sas_base_release_callback_handler(tm_cb_idx); + mpt2sas_base_release_callback_handler(base_cb_idx); + mpt2sas_base_release_callback_handler(transport_cb_idx); + mpt2sas_base_release_callback_handler(config_cb_idx); + mpt2sas_base_release_callback_handler(ctl_cb_idx); + + mpt2sas_ctl_exit(); +} + +module_init(scsih_init); +module_exit(scsih_exit); diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c new file mode 100644 index 00000000000..e03dc0b1e1a --- /dev/null +++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c @@ -0,0 +1,1211 @@ +/* + * SAS Transport Layer for MPT (Message Passing Technology) based controllers + * + * This code is based on drivers/scsi/mpt2sas/mpt2_transport.c + * Copyright (C) 2007-2008 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/workqueue.h> +#include <linux/delay.h> +#include <linux/pci.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_transport_sas.h> +#include <scsi/scsi_dbg.h> + +#include "mpt2sas_base.h" +/** + * _transport_sas_node_find_by_handle - sas node search + * @ioc: per adapter object + * @handle: expander or hba handle (assigned by firmware) + * Context: Calling function should acquire ioc->sas_node_lock. + * + * Search for either hba phys or expander device based on handle, then returns + * the sas_node object. + */ +static struct _sas_node * +_transport_sas_node_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + int i; + + for (i = 0; i < ioc->sas_hba.num_phys; i++) + if (ioc->sas_hba.phy[i].handle == handle) + return &ioc->sas_hba; + + return mpt2sas_scsih_expander_find_by_handle(ioc, handle); +} + +/** + * _transport_convert_phy_link_rate - + * @link_rate: link rate returned from mpt firmware + * + * Convert link_rate from mpi fusion into sas_transport form. + */ +static enum sas_linkrate +_transport_convert_phy_link_rate(u8 link_rate) +{ + enum sas_linkrate rc; + + switch (link_rate) { + case MPI2_SAS_NEG_LINK_RATE_1_5: + rc = SAS_LINK_RATE_1_5_GBPS; + break; + case MPI2_SAS_NEG_LINK_RATE_3_0: + rc = SAS_LINK_RATE_3_0_GBPS; + break; + case MPI2_SAS_NEG_LINK_RATE_6_0: + rc = SAS_LINK_RATE_6_0_GBPS; + break; + case MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED: + rc = SAS_PHY_DISABLED; + break; + case MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED: + rc = SAS_LINK_RATE_FAILED; + break; + case MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR: + rc = SAS_SATA_PORT_SELECTOR; + break; + case MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS: + rc = SAS_PHY_RESET_IN_PROGRESS; + break; + default: + case MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE: + case MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE: + rc = SAS_LINK_RATE_UNKNOWN; + break; + } + return rc; +} + +/** + * _transport_set_identify - set identify for phys and end devices + * @ioc: per adapter object + * @handle: device handle + * @identify: sas identify info + * + * Populates sas identify info. + * + * Returns 0 for success, non-zero for failure. + */ +static int +_transport_set_identify(struct MPT2SAS_ADAPTER *ioc, u16 handle, + struct sas_identify *identify) +{ + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2ConfigReply_t mpi_reply; + u32 device_info; + u32 ioc_status; + + if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, + MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x)" + "\nfailure at %s:%d/%s()!\n", ioc->name, handle, ioc_status, + __FILE__, __LINE__, __func__); + return -1; + } + + memset(identify, 0, sizeof(identify)); + device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); + + /* sas_address */ + identify->sas_address = le64_to_cpu(sas_device_pg0.SASAddress); + + /* device_type */ + switch (device_info & MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE) { + case MPI2_SAS_DEVICE_INFO_NO_DEVICE: + identify->device_type = SAS_PHY_UNUSED; + break; + case MPI2_SAS_DEVICE_INFO_END_DEVICE: + identify->device_type = SAS_END_DEVICE; + break; + case MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER: + identify->device_type = SAS_EDGE_EXPANDER_DEVICE; + break; + case MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER: + identify->device_type = SAS_FANOUT_EXPANDER_DEVICE; + break; + } + + /* initiator_port_protocols */ + if (device_info & MPI2_SAS_DEVICE_INFO_SSP_INITIATOR) + identify->initiator_port_protocols |= SAS_PROTOCOL_SSP; + if (device_info & MPI2_SAS_DEVICE_INFO_STP_INITIATOR) + identify->initiator_port_protocols |= SAS_PROTOCOL_STP; + if (device_info & MPI2_SAS_DEVICE_INFO_SMP_INITIATOR) + identify->initiator_port_protocols |= SAS_PROTOCOL_SMP; + if (device_info & MPI2_SAS_DEVICE_INFO_SATA_HOST) + identify->initiator_port_protocols |= SAS_PROTOCOL_SATA; + + /* target_port_protocols */ + if (device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) + identify->target_port_protocols |= SAS_PROTOCOL_SSP; + if (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) + identify->target_port_protocols |= SAS_PROTOCOL_STP; + if (device_info & MPI2_SAS_DEVICE_INFO_SMP_TARGET) + identify->target_port_protocols |= SAS_PROTOCOL_SMP; + if (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE) + identify->target_port_protocols |= SAS_PROTOCOL_SATA; + + return 0; +} + +/** + * mpt2sas_transport_done - internal transport layer callback handler. + * @ioc: per adapter object + * @smid: system request message index + * @VF_ID: virtual function id + * @reply: reply message frame(lower 32bit addr) + * + * Callback handler when sending internal generated transport cmds. + * The callback index passed is `ioc->transport_cb_idx` + * + * Return nothing. + */ +void +mpt2sas_transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, + u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + if (ioc->transport_cmds.status == MPT2_CMD_NOT_USED) + return; + if (ioc->transport_cmds.smid != smid) + return; + ioc->transport_cmds.status |= MPT2_CMD_COMPLETE; + if (mpi_reply) { + memcpy(ioc->transport_cmds.reply, mpi_reply, + mpi_reply->MsgLength*4); + ioc->transport_cmds.status |= MPT2_CMD_REPLY_VALID; + } + ioc->transport_cmds.status &= ~MPT2_CMD_PENDING; + complete(&ioc->transport_cmds.done); +} + +/* report manufacture request structure */ +struct rep_manu_request{ + u8 smp_frame_type; + u8 function; + u8 reserved; + u8 request_length; +}; + +/* report manufacture reply structure */ +struct rep_manu_reply{ + u8 smp_frame_type; /* 0x41 */ + u8 function; /* 0x01 */ + u8 function_result; + u8 response_length; + u16 expander_change_count; + u8 reserved0[2]; + u8 sas_format:1; + u8 reserved1:7; + u8 reserved2[3]; + u8 vendor_id[SAS_EXPANDER_VENDOR_ID_LEN]; + u8 product_id[SAS_EXPANDER_PRODUCT_ID_LEN]; + u8 product_rev[SAS_EXPANDER_PRODUCT_REV_LEN]; + u8 component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN]; + u16 component_id; + u8 component_revision_id; + u8 reserved3; + u8 vendor_specific[8]; +}; + +/** + * transport_expander_report_manufacture - obtain SMP report_manufacture + * @ioc: per adapter object + * @sas_address: expander sas address + * @edev: the sas_expander_device object + * + * Fills in the sas_expander_device object when SMP port is created. + * + * Returns 0 for success, non-zero for failure. + */ +static int +transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc, + u64 sas_address, struct sas_expander_device *edev) +{ + Mpi2SmpPassthroughRequest_t *mpi_request; + Mpi2SmpPassthroughReply_t *mpi_reply; + struct rep_manu_reply *manufacture_reply; + struct rep_manu_request *manufacture_request; + int rc; + u16 smid; + u32 ioc_state; + unsigned long timeleft; + void *psge; + u32 sgl_flags; + u8 issue_reset = 0; + unsigned long flags; + void *data_out = NULL; + dma_addr_t data_out_dma; + u32 sz; + u64 *sas_address_le; + u16 wait_state_count; + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->ioc_reset_in_progress) { + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n", + __func__, ioc->name); + return -EFAULT; + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + mutex_lock(&ioc->transport_cmds.mutex); + + if (ioc->transport_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_ERR_FMT "%s: transport_cmds in use\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + ioc->transport_cmds.status = MPT2_CMD_PENDING; + + wait_state_count = 0; + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + printk(MPT2SAS_ERR_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + ssleep(1); + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + printk(MPT2SAS_INFO_FMT "%s: waiting for " + "operational state(count=%d)\n", ioc->name, + __func__, wait_state_count); + } + if (wait_state_count) + printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n", + ioc->name, __func__); + + smid = mpt2sas_base_get_smid(ioc, ioc->transport_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->transport_cmds.smid = smid; + + sz = sizeof(struct rep_manu_request) + sizeof(struct rep_manu_reply); + data_out = pci_alloc_consistent(ioc->pdev, sz, &data_out_dma); + + if (!data_out) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + rc = -ENOMEM; + mpt2sas_base_free_smid(ioc, smid); + goto out; + } + + manufacture_request = data_out; + manufacture_request->smp_frame_type = 0x40; + manufacture_request->function = 1; + manufacture_request->reserved = 0; + manufacture_request->request_length = 0; + + memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); + mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; + mpi_request->PhysicalPort = 0xFF; + sas_address_le = (u64 *)&mpi_request->SASAddress; + *sas_address_le = cpu_to_le64(sas_address); + mpi_request->RequestDataLength = sizeof(struct rep_manu_request); + psge = &mpi_request->SGL; + + /* WRITE sgel first */ + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + sizeof(struct rep_manu_request), data_out_dma); + + /* incr sgel */ + psge += ioc->sge_size; + + /* READ sgel last */ + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | + MPI2_SGE_FLAGS_END_OF_LIST); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + ioc->base_add_sg_single(psge, sgl_flags | + sizeof(struct rep_manu_reply), data_out_dma + + sizeof(struct rep_manu_request)); + + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "report_manufacture - " + "send to sas_addr(0x%016llx)\n", ioc->name, + (unsigned long long)sas_address)); + mpt2sas_base_put_smid_default(ioc, smid, 0 /* VF_ID */); + timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done, + 10*HZ); + + if (!(ioc->transport_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s: timeout\n", + ioc->name, __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SmpPassthroughRequest_t)/4); + if (!(ioc->transport_cmds.status & MPT2_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "report_manufacture - " + "complete\n", ioc->name)); + + if (ioc->transport_cmds.status & MPT2_CMD_REPLY_VALID) { + u8 *tmp; + + mpi_reply = ioc->transport_cmds.reply; + + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "report_manufacture - reply data transfer size(%d)\n", + ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength))); + + if (le16_to_cpu(mpi_reply->ResponseDataLength) != + sizeof(struct rep_manu_reply)) + goto out; + + manufacture_reply = data_out + sizeof(struct rep_manu_request); + strncpy(edev->vendor_id, manufacture_reply->vendor_id, + SAS_EXPANDER_VENDOR_ID_LEN); + strncpy(edev->product_id, manufacture_reply->product_id, + SAS_EXPANDER_PRODUCT_ID_LEN); + strncpy(edev->product_rev, manufacture_reply->product_rev, + SAS_EXPANDER_PRODUCT_REV_LEN); + edev->level = manufacture_reply->sas_format; + if (manufacture_reply->sas_format) { + strncpy(edev->component_vendor_id, + manufacture_reply->component_vendor_id, + SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN); + tmp = (u8 *)&manufacture_reply->component_id; + edev->component_id = tmp[0] << 8 | tmp[1]; + edev->component_revision_id = + manufacture_reply->component_revision_id; + } + } else + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "report_manufacture - no reply\n", ioc->name)); + + issue_host_reset: + if (issue_reset) + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + out: + ioc->transport_cmds.status = MPT2_CMD_NOT_USED; + if (data_out) + pci_free_consistent(ioc->pdev, sz, data_out, data_out_dma); + + mutex_unlock(&ioc->transport_cmds.mutex); + return rc; +} + +/** + * mpt2sas_transport_port_add - insert port to the list + * @ioc: per adapter object + * @handle: handle of attached device + * @parent_handle: parent handle(either hba or expander) + * Context: This function will acquire ioc->sas_node_lock. + * + * Adding new port object to the sas_node->sas_port_list. + * + * Returns mpt2sas_port. + */ +struct _sas_port * +mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER *ioc, u16 handle, + u16 parent_handle) +{ + struct _sas_phy *mpt2sas_phy, *next; + struct _sas_port *mpt2sas_port; + unsigned long flags; + struct _sas_node *sas_node; + struct sas_rphy *rphy; + int i; + struct sas_port *port; + + if (!parent_handle) + return NULL; + + mpt2sas_port = kzalloc(sizeof(struct _sas_port), + GFP_KERNEL); + if (!mpt2sas_port) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return NULL; + } + + INIT_LIST_HEAD(&mpt2sas_port->port_list); + INIT_LIST_HEAD(&mpt2sas_port->phy_list); + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_node = _transport_sas_node_find_by_handle(ioc, parent_handle); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + if (!sas_node) { + printk(MPT2SAS_ERR_FMT "%s: Could not find parent(0x%04x)!\n", + ioc->name, __func__, parent_handle); + goto out_fail; + } + + mpt2sas_port->handle = parent_handle; + mpt2sas_port->sas_address = sas_node->sas_address; + if ((_transport_set_identify(ioc, handle, + &mpt2sas_port->remote_identify))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_fail; + } + + if (mpt2sas_port->remote_identify.device_type == SAS_PHY_UNUSED) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_fail; + } + + for (i = 0; i < sas_node->num_phys; i++) { + if (sas_node->phy[i].remote_identify.sas_address != + mpt2sas_port->remote_identify.sas_address) + continue; + list_add_tail(&sas_node->phy[i].port_siblings, + &mpt2sas_port->phy_list); + mpt2sas_port->num_phys++; + } + + if (!mpt2sas_port->num_phys) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_fail; + } + + port = sas_port_alloc_num(sas_node->parent_dev); + if ((sas_port_add(port))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out_fail; + } + + list_for_each_entry(mpt2sas_phy, &mpt2sas_port->phy_list, + port_siblings) { + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &port->dev, "add: handle(0x%04x)" + ", sas_addr(0x%016llx), phy(%d)\n", handle, + (unsigned long long) + mpt2sas_port->remote_identify.sas_address, + mpt2sas_phy->phy_id); + sas_port_add_phy(port, mpt2sas_phy->phy); + } + + mpt2sas_port->port = port; + if (mpt2sas_port->remote_identify.device_type == SAS_END_DEVICE) + rphy = sas_end_device_alloc(port); + else + rphy = sas_expander_alloc(port, + mpt2sas_port->remote_identify.device_type); + + rphy->identify = mpt2sas_port->remote_identify; + if ((sas_rphy_add(rphy))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + } + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &rphy->dev, "add: handle(0x%04x), " + "sas_addr(0x%016llx)\n", handle, + (unsigned long long) + mpt2sas_port->remote_identify.sas_address); + mpt2sas_port->rphy = rphy; + spin_lock_irqsave(&ioc->sas_node_lock, flags); + list_add_tail(&mpt2sas_port->port_list, &sas_node->sas_port_list); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + /* fill in report manufacture */ + if (mpt2sas_port->remote_identify.device_type == + MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER || + mpt2sas_port->remote_identify.device_type == + MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) + transport_expander_report_manufacture(ioc, + mpt2sas_port->remote_identify.sas_address, + rphy_to_expander_device(rphy)); + + return mpt2sas_port; + + out_fail: + list_for_each_entry_safe(mpt2sas_phy, next, &mpt2sas_port->phy_list, + port_siblings) + list_del(&mpt2sas_phy->port_siblings); + kfree(mpt2sas_port); + return NULL; +} + +/** + * mpt2sas_transport_port_remove - remove port from the list + * @ioc: per adapter object + * @sas_address: sas address of attached device + * @parent_handle: handle to the upstream parent(either hba or expander) + * Context: This function will acquire ioc->sas_node_lock. + * + * Removing object and freeing associated memory from the + * ioc->sas_port_list. + * + * Return nothing. + */ +void +mpt2sas_transport_port_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, + u16 parent_handle) +{ + int i; + unsigned long flags; + struct _sas_port *mpt2sas_port, *next; + struct _sas_node *sas_node; + u8 found = 0; + struct _sas_phy *mpt2sas_phy, *next_phy; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_node = _transport_sas_node_find_by_handle(ioc, parent_handle); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + if (!sas_node) + return; + list_for_each_entry_safe(mpt2sas_port, next, &sas_node->sas_port_list, + port_list) { + if (mpt2sas_port->remote_identify.sas_address != sas_address) + continue; + found = 1; + list_del(&mpt2sas_port->port_list); + goto out; + } + out: + if (!found) + return; + + for (i = 0; i < sas_node->num_phys; i++) { + if (sas_node->phy[i].remote_identify.sas_address == sas_address) + memset(&sas_node->phy[i].remote_identify, 0 , + sizeof(struct sas_identify)); + } + + list_for_each_entry_safe(mpt2sas_phy, next_phy, + &mpt2sas_port->phy_list, port_siblings) { + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &mpt2sas_port->port->dev, + "remove: parent_handle(0x%04x), " + "sas_addr(0x%016llx), phy(%d)\n", parent_handle, + (unsigned long long) + mpt2sas_port->remote_identify.sas_address, + mpt2sas_phy->phy_id); + sas_port_delete_phy(mpt2sas_port->port, mpt2sas_phy->phy); + list_del(&mpt2sas_phy->port_siblings); + } + sas_port_delete(mpt2sas_port->port); + kfree(mpt2sas_port); +} + +/** + * mpt2sas_transport_add_host_phy - report sas_host phy to transport + * @ioc: per adapter object + * @mpt2sas_phy: mpt2sas per phy object + * @phy_pg0: sas phy page 0 + * @parent_dev: parent device class object + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_transport_add_host_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy + *mpt2sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev) +{ + struct sas_phy *phy; + int phy_index = mpt2sas_phy->phy_id; + + + INIT_LIST_HEAD(&mpt2sas_phy->port_siblings); + phy = sas_phy_alloc(parent_dev, phy_index); + if (!phy) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + if ((_transport_set_identify(ioc, mpt2sas_phy->handle, + &mpt2sas_phy->identify))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + phy->identify = mpt2sas_phy->identify; + mpt2sas_phy->attached_handle = le16_to_cpu(phy_pg0.AttachedDevHandle); + if (mpt2sas_phy->attached_handle) + _transport_set_identify(ioc, mpt2sas_phy->attached_handle, + &mpt2sas_phy->remote_identify); + phy->identify.phy_identifier = mpt2sas_phy->phy_id; + phy->negotiated_linkrate = _transport_convert_phy_link_rate( + phy_pg0.NegotiatedLinkRate & MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL); + phy->minimum_linkrate_hw = _transport_convert_phy_link_rate( + phy_pg0.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK); + phy->maximum_linkrate_hw = _transport_convert_phy_link_rate( + phy_pg0.HwLinkRate >> 4); + phy->minimum_linkrate = _transport_convert_phy_link_rate( + phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); + phy->maximum_linkrate = _transport_convert_phy_link_rate( + phy_pg0.ProgrammedLinkRate >> 4); + + if ((sas_phy_add(phy))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + sas_phy_free(phy); + return -1; + } + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &phy->dev, + "add: handle(0x%04x), sas_addr(0x%016llx)\n" + "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", + mpt2sas_phy->handle, (unsigned long long) + mpt2sas_phy->identify.sas_address, + mpt2sas_phy->attached_handle, + (unsigned long long) + mpt2sas_phy->remote_identify.sas_address); + mpt2sas_phy->phy = phy; + return 0; +} + + +/** + * mpt2sas_transport_add_expander_phy - report expander phy to transport + * @ioc: per adapter object + * @mpt2sas_phy: mpt2sas per phy object + * @expander_pg1: expander page 1 + * @parent_dev: parent device class object + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_transport_add_expander_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy + *mpt2sas_phy, Mpi2ExpanderPage1_t expander_pg1, struct device *parent_dev) +{ + struct sas_phy *phy; + int phy_index = mpt2sas_phy->phy_id; + + INIT_LIST_HEAD(&mpt2sas_phy->port_siblings); + phy = sas_phy_alloc(parent_dev, phy_index); + if (!phy) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + if ((_transport_set_identify(ioc, mpt2sas_phy->handle, + &mpt2sas_phy->identify))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -1; + } + phy->identify = mpt2sas_phy->identify; + mpt2sas_phy->attached_handle = + le16_to_cpu(expander_pg1.AttachedDevHandle); + if (mpt2sas_phy->attached_handle) + _transport_set_identify(ioc, mpt2sas_phy->attached_handle, + &mpt2sas_phy->remote_identify); + phy->identify.phy_identifier = mpt2sas_phy->phy_id; + phy->negotiated_linkrate = _transport_convert_phy_link_rate( + expander_pg1.NegotiatedLinkRate & + MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL); + phy->minimum_linkrate_hw = _transport_convert_phy_link_rate( + expander_pg1.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK); + phy->maximum_linkrate_hw = _transport_convert_phy_link_rate( + expander_pg1.HwLinkRate >> 4); + phy->minimum_linkrate = _transport_convert_phy_link_rate( + expander_pg1.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); + phy->maximum_linkrate = _transport_convert_phy_link_rate( + expander_pg1.ProgrammedLinkRate >> 4); + + if ((sas_phy_add(phy))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + sas_phy_free(phy); + return -1; + } + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &phy->dev, + "add: handle(0x%04x), sas_addr(0x%016llx)\n" + "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", + mpt2sas_phy->handle, (unsigned long long) + mpt2sas_phy->identify.sas_address, + mpt2sas_phy->attached_handle, + (unsigned long long) + mpt2sas_phy->remote_identify.sas_address); + mpt2sas_phy->phy = phy; + return 0; +} + +/** + * mpt2sas_transport_update_phy_link_change - refreshing phy link changes and attached devices + * @ioc: per adapter object + * @handle: handle to sas_host or expander + * @attached_handle: attached device handle + * @phy_numberv: phy number + * @link_rate: new link rate + * + * Returns nothing. + */ +void +mpt2sas_transport_update_phy_link_change(struct MPT2SAS_ADAPTER *ioc, + u16 handle, u16 attached_handle, u8 phy_number, u8 link_rate) +{ + unsigned long flags; + struct _sas_node *sas_node; + struct _sas_phy *mpt2sas_phy; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_node = _transport_sas_node_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + if (!sas_node) + return; + + mpt2sas_phy = &sas_node->phy[phy_number]; + mpt2sas_phy->attached_handle = attached_handle; + if (attached_handle && (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)) + _transport_set_identify(ioc, mpt2sas_phy->attached_handle, + &mpt2sas_phy->remote_identify); + else + memset(&mpt2sas_phy->remote_identify, 0 , sizeof(struct + sas_identify)); + + if (mpt2sas_phy->phy) + mpt2sas_phy->phy->negotiated_linkrate = + _transport_convert_phy_link_rate(link_rate); + + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &mpt2sas_phy->phy->dev, + "refresh: handle(0x%04x), sas_addr(0x%016llx),\n" + "\tlink_rate(0x%02x), phy(%d)\n" + "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", + handle, (unsigned long long) + mpt2sas_phy->identify.sas_address, link_rate, + phy_number, attached_handle, + (unsigned long long) + mpt2sas_phy->remote_identify.sas_address); +} + +static inline void * +phy_to_ioc(struct sas_phy *phy) +{ + struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); + return shost_priv(shost); +} + +static inline void * +rphy_to_ioc(struct sas_rphy *rphy) +{ + struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent); + return shost_priv(shost); +} + +/** + * transport_get_linkerrors - + * @phy: The sas phy object + * + * Only support sas_host direct attached phys. + * Returns 0 for success, non-zero for failure. + * + */ +static int +transport_get_linkerrors(struct sas_phy *phy) +{ + struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy); + struct _sas_phy *mpt2sas_phy; + Mpi2ConfigReply_t mpi_reply; + Mpi2SasPhyPage1_t phy_pg1; + int i; + + for (i = 0, mpt2sas_phy = NULL; i < ioc->sas_hba.num_phys && + !mpt2sas_phy; i++) { + if (ioc->sas_hba.phy[i].phy != phy) + continue; + mpt2sas_phy = &ioc->sas_hba.phy[i]; + } + + if (!mpt2sas_phy) /* this phy not on sas_host */ + return -EINVAL; + + if ((mpt2sas_config_get_phy_pg1(ioc, &mpi_reply, &phy_pg1, + mpt2sas_phy->phy_id))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -ENXIO; + } + + if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) + printk(MPT2SAS_INFO_FMT "phy(%d), ioc_status" + "(0x%04x), loginfo(0x%08x)\n", ioc->name, + mpt2sas_phy->phy_id, + le16_to_cpu(mpi_reply.IOCStatus), + le32_to_cpu(mpi_reply.IOCLogInfo)); + + phy->invalid_dword_count = le32_to_cpu(phy_pg1.InvalidDwordCount); + phy->running_disparity_error_count = + le32_to_cpu(phy_pg1.RunningDisparityErrorCount); + phy->loss_of_dword_sync_count = + le32_to_cpu(phy_pg1.LossDwordSynchCount); + phy->phy_reset_problem_count = + le32_to_cpu(phy_pg1.PhyResetProblemCount); + return 0; +} + +/** + * transport_get_enclosure_identifier - + * @phy: The sas phy object + * + * Obtain the enclosure logical id for an expander. + * Returns 0 for success, non-zero for failure. + */ +static int +transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier) +{ + struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy); + struct _sas_node *sas_expander; + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc, + rphy->identify.sas_address); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + if (!sas_expander) + return -ENXIO; + + *identifier = sas_expander->enclosure_logical_id; + return 0; +} + +/** + * transport_get_bay_identifier - + * @phy: The sas phy object + * + * Returns the slot id for a device that resides inside an enclosure. + */ +static int +transport_get_bay_identifier(struct sas_rphy *rphy) +{ + struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy); + struct _sas_device *sas_device; + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + rphy->identify.sas_address); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + if (!sas_device) + return -ENXIO; + + return sas_device->slot; +} + +/** + * transport_phy_reset - + * @phy: The sas phy object + * @hard_reset: + * + * Only support sas_host direct attached phys. + * Returns 0 for success, non-zero for failure. + */ +static int +transport_phy_reset(struct sas_phy *phy, int hard_reset) +{ + struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy); + struct _sas_phy *mpt2sas_phy; + Mpi2SasIoUnitControlReply_t mpi_reply; + Mpi2SasIoUnitControlRequest_t mpi_request; + int i; + + for (i = 0, mpt2sas_phy = NULL; i < ioc->sas_hba.num_phys && + !mpt2sas_phy; i++) { + if (ioc->sas_hba.phy[i].phy != phy) + continue; + mpt2sas_phy = &ioc->sas_hba.phy[i]; + } + + if (!mpt2sas_phy) /* this phy not on sas_host */ + return -EINVAL; + + memset(&mpi_request, 0, sizeof(Mpi2SasIoUnitControlReply_t)); + mpi_request.Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL; + mpi_request.Operation = hard_reset ? + MPI2_SAS_OP_PHY_HARD_RESET : MPI2_SAS_OP_PHY_LINK_RESET; + mpi_request.PhyNum = mpt2sas_phy->phy_id; + + if ((mpt2sas_base_sas_iounit_control(ioc, &mpi_reply, &mpi_request))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -ENXIO; + } + + if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) + printk(MPT2SAS_INFO_FMT "phy(%d), ioc_status" + "(0x%04x), loginfo(0x%08x)\n", ioc->name, + mpt2sas_phy->phy_id, + le16_to_cpu(mpi_reply.IOCStatus), + le32_to_cpu(mpi_reply.IOCLogInfo)); + + return 0; +} + +/** + * transport_smp_handler - transport portal for smp passthru + * @shost: shost object + * @rphy: sas transport rphy object + * @req: + * + * This used primarily for smp_utils. + * Example: + * smp_rep_general /sys/class/bsg/expander-5:0 + */ +static int +transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, + struct request *req) +{ + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + Mpi2SmpPassthroughRequest_t *mpi_request; + Mpi2SmpPassthroughReply_t *mpi_reply; + int rc; + u16 smid; + u32 ioc_state; + unsigned long timeleft; + void *psge; + u32 sgl_flags; + u8 issue_reset = 0; + unsigned long flags; + dma_addr_t dma_addr_in = 0; + dma_addr_t dma_addr_out = 0; + u16 wait_state_count; + struct request *rsp = req->next_rq; + + if (!rsp) { + printk(MPT2SAS_ERR_FMT "%s: the smp response space is " + "missing\n", ioc->name, __func__); + return -EINVAL; + } + + /* do we need to support multiple segments? */ + if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) { + printk(MPT2SAS_ERR_FMT "%s: multiple segments req %u %u, " + "rsp %u %u\n", ioc->name, __func__, req->bio->bi_vcnt, + req->data_len, rsp->bio->bi_vcnt, rsp->data_len); + return -EINVAL; + } + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->ioc_reset_in_progress) { + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n", + __func__, ioc->name); + return -EFAULT; + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + + rc = mutex_lock_interruptible(&ioc->transport_cmds.mutex); + if (rc) + return rc; + + if (ioc->transport_cmds.status != MPT2_CMD_NOT_USED) { + printk(MPT2SAS_ERR_FMT "%s: transport_cmds in use\n", ioc->name, + __func__); + rc = -EAGAIN; + goto out; + } + ioc->transport_cmds.status = MPT2_CMD_PENDING; + + wait_state_count = 0; + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + if (wait_state_count++ == 10) { + printk(MPT2SAS_ERR_FMT + "%s: failed due to ioc not operational\n", + ioc->name, __func__); + rc = -EFAULT; + goto out; + } + ssleep(1); + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + printk(MPT2SAS_INFO_FMT "%s: waiting for " + "operational state(count=%d)\n", ioc->name, + __func__, wait_state_count); + } + if (wait_state_count) + printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n", + ioc->name, __func__); + + smid = mpt2sas_base_get_smid(ioc, ioc->transport_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->transport_cmds.smid = smid; + + memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); + mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; + mpi_request->PhysicalPort = 0xFF; + *((u64 *)&mpi_request->SASAddress) = (rphy) ? + cpu_to_le64(rphy->identify.sas_address) : + cpu_to_le64(ioc->sas_hba.sas_address); + mpi_request->RequestDataLength = cpu_to_le16(req->data_len - 4); + psge = &mpi_request->SGL; + + /* WRITE sgel first */ + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + dma_addr_out = pci_map_single(ioc->pdev, bio_data(req->bio), + req->data_len, PCI_DMA_BIDIRECTIONAL); + if (!dma_addr_out) { + mpt2sas_base_free_smid(ioc, le16_to_cpu(smid)); + goto unmap; + } + + ioc->base_add_sg_single(psge, sgl_flags | (req->data_len - 4), + dma_addr_out); + + /* incr sgel */ + psge += ioc->sge_size; + + /* READ sgel last */ + sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | + MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | + MPI2_SGE_FLAGS_END_OF_LIST); + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + dma_addr_in = pci_map_single(ioc->pdev, bio_data(rsp->bio), + rsp->data_len, PCI_DMA_BIDIRECTIONAL); + if (!dma_addr_in) { + mpt2sas_base_free_smid(ioc, le16_to_cpu(smid)); + goto unmap; + } + + ioc->base_add_sg_single(psge, sgl_flags | (rsp->data_len + 4), + dma_addr_in); + + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - " + "sending smp request\n", ioc->name, __func__)); + + mpt2sas_base_put_smid_default(ioc, smid, 0 /* VF_ID */); + timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done, + 10*HZ); + + if (!(ioc->transport_cmds.status & MPT2_CMD_COMPLETE)) { + printk(MPT2SAS_ERR_FMT "%s : timeout\n", + __func__, ioc->name); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SmpPassthroughRequest_t)/4); + if (!(ioc->transport_cmds.status & MPT2_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - " + "complete\n", ioc->name, __func__)); + + if (ioc->transport_cmds.status & MPT2_CMD_REPLY_VALID) { + + mpi_reply = ioc->transport_cmds.reply; + + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "%s - reply data transfer size(%d)\n", + ioc->name, __func__, + le16_to_cpu(mpi_reply->ResponseDataLength))); + + memcpy(req->sense, mpi_reply, sizeof(*mpi_reply)); + req->sense_len = sizeof(*mpi_reply); + req->data_len = 0; + rsp->data_len -= mpi_reply->ResponseDataLength; + + } else { + dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT + "%s - no reply\n", ioc->name, __func__)); + rc = -ENXIO; + } + + issue_host_reset: + if (issue_reset) { + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + rc = -ETIMEDOUT; + } + + unmap: + if (dma_addr_out) + pci_unmap_single(ioc->pdev, dma_addr_out, req->data_len, + PCI_DMA_BIDIRECTIONAL); + if (dma_addr_in) + pci_unmap_single(ioc->pdev, dma_addr_in, rsp->data_len, + PCI_DMA_BIDIRECTIONAL); + + out: + ioc->transport_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->transport_cmds.mutex); + return rc; +} + +struct sas_function_template mpt2sas_transport_functions = { + .get_linkerrors = transport_get_linkerrors, + .get_enclosure_identifier = transport_get_enclosure_identifier, + .get_bay_identifier = transport_get_bay_identifier, + .phy_reset = transport_phy_reset, + .smp_handler = transport_smp_handler, +}; + +struct scsi_transport_template *mpt2sas_transport_template; diff --git a/drivers/scsi/osd/Kbuild b/drivers/scsi/osd/Kbuild new file mode 100644 index 00000000000..0e207aa67d1 --- /dev/null +++ b/drivers/scsi/osd/Kbuild @@ -0,0 +1,45 @@ +# +# Kbuild for the OSD modules +# +# Copyright (C) 2008 Panasas Inc. All rights reserved. +# +# Authors: +# Boaz Harrosh <bharrosh@panasas.com> +# Benny Halevy <bhalevy@panasas.com> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 +# + +ifneq ($(OSD_INC),) +# we are built out-of-tree Kconfigure everything as on + +CONFIG_SCSI_OSD_INITIATOR=m +ccflags-y += -DCONFIG_SCSI_OSD_INITIATOR -DCONFIG_SCSI_OSD_INITIATOR_MODULE + +CONFIG_SCSI_OSD_ULD=m +ccflags-y += -DCONFIG_SCSI_OSD_ULD -DCONFIG_SCSI_OSD_ULD_MODULE + +# CONFIG_SCSI_OSD_DPRINT_SENSE = +# 0 - no print of errors +# 1 - print errors +# 2 - errors + warrnings +ccflags-y += -DCONFIG_SCSI_OSD_DPRINT_SENSE=1 + +# Uncomment to turn debug on +# ccflags-y += -DCONFIG_SCSI_OSD_DEBUG + +# if we are built out-of-tree and the hosting kernel has OSD headers +# then "ccflags-y +=" will not pick the out-off-tree headers. Only by doing +# this it will work. This might break in future kernels +LINUXINCLUDE := -I$(OSD_INC) $(LINUXINCLUDE) + +endif + +# libosd.ko - osd-initiator library +libosd-y := osd_initiator.o +obj-$(CONFIG_SCSI_OSD_INITIATOR) += libosd.o + +# osd.ko - SCSI ULD and char-device +osd-y := osd_uld.o +obj-$(CONFIG_SCSI_OSD_ULD) += osd.o diff --git a/drivers/scsi/osd/Kconfig b/drivers/scsi/osd/Kconfig new file mode 100644 index 00000000000..861b5cebaea --- /dev/null +++ b/drivers/scsi/osd/Kconfig @@ -0,0 +1,53 @@ +# +# Kernel configuration file for the OSD scsi protocol +# +# Copyright (C) 2008 Panasas Inc. All rights reserved. +# +# Authors: +# Boaz Harrosh <bharrosh@panasas.com> +# Benny Halevy <bhalevy@panasas.com> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public version 2 License as +# published by the Free Software Foundation +# +# FIXME: SCSI_OSD_INITIATOR should select CONFIG (HMAC) SHA1 somehow. +# How is it done properly? +# + +config SCSI_OSD_INITIATOR + tristate "OSD-Initiator library" + depends on SCSI + help + Enable the OSD-Initiator library (libosd.ko). + NOTE: You must also select CRYPTO_SHA1 + CRYPTO_HMAC and their + dependencies + +config SCSI_OSD_ULD + tristate "OSD Upper Level driver" + depends on SCSI_OSD_INITIATOR + help + Build a SCSI upper layer driver that exports /dev/osdX devices + to user-mode for testing and controlling OSD devices. It is also + needed by exofs, for mounting an OSD based file system. + +config SCSI_OSD_DPRINT_SENSE + int "(0-2) When sense is returned, DEBUG print all sense descriptors" + default 1 + depends on SCSI_OSD_INITIATOR + help + When a CHECK_CONDITION status is returned from a target, and a + sense-buffer is retrieved, turning this on will dump a full + sense-decoding message. Setting to 2 will also print recoverable + errors that might be regularly returned for some filesystem + operations. + +config SCSI_OSD_DEBUG + bool "Compile All OSD modules with lots of DEBUG prints" + default n + depends on SCSI_OSD_INITIATOR + help + OSD Code is populated with lots of OSD_DEBUG(..) printouts to + dmesg. Enable this if you found a bug and you want to help us + track the problem (see also MAINTAINERS). Setting this will also + force SCSI_OSD_DPRINT_SENSE=2. diff --git a/drivers/scsi/osd/Makefile b/drivers/scsi/osd/Makefile new file mode 100755 index 00000000000..d905344f83b --- /dev/null +++ b/drivers/scsi/osd/Makefile @@ -0,0 +1,37 @@ +# +# Makefile for the OSD modules (out of tree) +# +# Copyright (C) 2008 Panasas Inc. All rights reserved. +# +# Authors: +# Boaz Harrosh <bharrosh@panasas.com> +# Benny Halevy <bhalevy@panasas.com> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 +# +# This Makefile is used to call the kernel Makefile in case of an out-of-tree +# build. +# $KSRC should point to a Kernel source tree otherwise host's default is +# used. (eg. /lib/modules/`uname -r`/build) + +# include path for out-of-tree Headers +OSD_INC ?= `pwd`/../../../include + +# allow users to override these +# e.g. to compile for a kernel that you aren't currently running +KSRC ?= /lib/modules/$(shell uname -r)/build +KBUILD_OUTPUT ?= +ARCH ?= +V ?= 0 + +# this is the basic Kbuild out-of-tree invocation, with the M= option +KBUILD_BASE = +$(MAKE) -C $(KSRC) M=`pwd` KBUILD_OUTPUT=$(KBUILD_OUTPUT) ARCH=$(ARCH) V=$(V) + +all: libosd + +libosd: ; + $(KBUILD_BASE) OSD_INC=$(OSD_INC) modules + +clean: + $(KBUILD_BASE) clean diff --git a/drivers/scsi/osd/osd_debug.h b/drivers/scsi/osd/osd_debug.h new file mode 100644 index 00000000000..579e491f11d --- /dev/null +++ b/drivers/scsi/osd/osd_debug.h @@ -0,0 +1,30 @@ +/* + * osd_debug.h - Some kprintf macros + * + * Copyright (C) 2008 Panasas Inc. All rights reserved. + * + * Authors: + * Boaz Harrosh <bharrosh@panasas.com> + * Benny Halevy <bhalevy@panasas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * + */ +#ifndef __OSD_DEBUG_H__ +#define __OSD_DEBUG_H__ + +#define OSD_ERR(fmt, a...) printk(KERN_ERR "osd: " fmt, ##a) +#define OSD_INFO(fmt, a...) printk(KERN_NOTICE "osd: " fmt, ##a) + +#ifdef CONFIG_SCSI_OSD_DEBUG +#define OSD_DEBUG(fmt, a...) \ + printk(KERN_NOTICE "osd @%s:%d: " fmt, __func__, __LINE__, ##a) +#else +#define OSD_DEBUG(fmt, a...) do {} while (0) +#endif + +/* u64 has problems with printk this will cast it to unsigned long long */ +#define _LLU(x) (unsigned long long)(x) + +#endif /* ndef __OSD_DEBUG_H__ */ diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c new file mode 100644 index 00000000000..552f58b655d --- /dev/null +++ b/drivers/scsi/osd/osd_initiator.c @@ -0,0 +1,1657 @@ +/* + * osd_initiator - Main body of the osd initiator library. + * + * Note: The file does not contain the advanced security functionality which + * is only needed by the security_manager's initiators. + * + * Copyright (C) 2008 Panasas Inc. All rights reserved. + * + * Authors: + * Boaz Harrosh <bharrosh@panasas.com> + * Benny Halevy <bhalevy@panasas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Panasas company nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <scsi/osd_initiator.h> +#include <scsi/osd_sec.h> +#include <scsi/osd_attributes.h> +#include <scsi/osd_sense.h> + +#include <scsi/scsi_device.h> + +#include "osd_debug.h" + +#ifndef __unused +# define __unused __attribute__((unused)) +#endif + +enum { OSD_REQ_RETRIES = 1 }; + +MODULE_AUTHOR("Boaz Harrosh <bharrosh@panasas.com>"); +MODULE_DESCRIPTION("open-osd initiator library libosd.ko"); +MODULE_LICENSE("GPL"); + +static inline void build_test(void) +{ + /* structures were not packed */ + BUILD_BUG_ON(sizeof(struct osd_capability) != OSD_CAP_LEN); + BUILD_BUG_ON(sizeof(struct osdv2_cdb) != OSD_TOTAL_CDB_LEN); + BUILD_BUG_ON(sizeof(struct osdv1_cdb) != OSDv1_TOTAL_CDB_LEN); +} + +static const char *_osd_ver_desc(struct osd_request *or) +{ + return osd_req_is_ver1(or) ? "OSD1" : "OSD2"; +} + +#define ATTR_DEF_RI(id, len) ATTR_DEF(OSD_APAGE_ROOT_INFORMATION, id, len) + +static int _osd_print_system_info(struct osd_dev *od, void *caps) +{ + struct osd_request *or; + struct osd_attr get_attrs[] = { + ATTR_DEF_RI(OSD_ATTR_RI_VENDOR_IDENTIFICATION, 8), + ATTR_DEF_RI(OSD_ATTR_RI_PRODUCT_IDENTIFICATION, 16), + ATTR_DEF_RI(OSD_ATTR_RI_PRODUCT_MODEL, 32), + ATTR_DEF_RI(OSD_ATTR_RI_PRODUCT_REVISION_LEVEL, 4), + ATTR_DEF_RI(OSD_ATTR_RI_PRODUCT_SERIAL_NUMBER, 64 /*variable*/), + ATTR_DEF_RI(OSD_ATTR_RI_OSD_NAME, 64 /*variable*/), + ATTR_DEF_RI(OSD_ATTR_RI_TOTAL_CAPACITY, 8), + ATTR_DEF_RI(OSD_ATTR_RI_USED_CAPACITY, 8), + ATTR_DEF_RI(OSD_ATTR_RI_NUMBER_OF_PARTITIONS, 8), + ATTR_DEF_RI(OSD_ATTR_RI_CLOCK, 6), + /* IBM-OSD-SIM Has a bug with this one put it last */ + ATTR_DEF_RI(OSD_ATTR_RI_OSD_SYSTEM_ID, 20), + }; + void *iter = NULL, *pFirst; + int nelem = ARRAY_SIZE(get_attrs), a = 0; + int ret; + + or = osd_start_request(od, GFP_KERNEL); + if (!or) + return -ENOMEM; + + /* get attrs */ + osd_req_get_attributes(or, &osd_root_object); + osd_req_add_get_attr_list(or, get_attrs, ARRAY_SIZE(get_attrs)); + + ret = osd_finalize_request(or, 0, caps, NULL); + if (ret) + goto out; + + ret = osd_execute_request(or); + if (ret) { + OSD_ERR("Failed to detect %s => %d\n", _osd_ver_desc(or), ret); + goto out; + } + + osd_req_decode_get_attr_list(or, get_attrs, &nelem, &iter); + + OSD_INFO("Detected %s device\n", + _osd_ver_desc(or)); + + pFirst = get_attrs[a++].val_ptr; + OSD_INFO("OSD_ATTR_RI_VENDOR_IDENTIFICATION [%s]\n", + (char *)pFirst); + + pFirst = get_attrs[a++].val_ptr; + OSD_INFO("OSD_ATTR_RI_PRODUCT_IDENTIFICATION [%s]\n", + (char *)pFirst); + + pFirst = get_attrs[a++].val_ptr; + OSD_INFO("OSD_ATTR_RI_PRODUCT_MODEL [%s]\n", + (char *)pFirst); + + pFirst = get_attrs[a++].val_ptr; + OSD_INFO("OSD_ATTR_RI_PRODUCT_REVISION_LEVEL [%u]\n", + pFirst ? get_unaligned_be32(pFirst) : ~0U); + + pFirst = get_attrs[a++].val_ptr; + OSD_INFO("OSD_ATTR_RI_PRODUCT_SERIAL_NUMBER [%s]\n", + (char *)pFirst); + + pFirst = get_attrs[a].val_ptr; + OSD_INFO("OSD_ATTR_RI_OSD_NAME [%s]\n", (char *)pFirst); + a++; + + pFirst = get_attrs[a++].val_ptr; + OSD_INFO("OSD_ATTR_RI_TOTAL_CAPACITY [0x%llx]\n", + pFirst ? _LLU(get_unaligned_be64(pFirst)) : ~0ULL); + + pFirst = get_attrs[a++].val_ptr; + OSD_INFO("OSD_ATTR_RI_USED_CAPACITY [0x%llx]\n", + pFirst ? _LLU(get_unaligned_be64(pFirst)) : ~0ULL); + + pFirst = get_attrs[a++].val_ptr; + OSD_INFO("OSD_ATTR_RI_NUMBER_OF_PARTITIONS [%llu]\n", + pFirst ? _LLU(get_unaligned_be64(pFirst)) : ~0ULL); + + if (a >= nelem) + goto out; + + /* FIXME: Where are the time utilities */ + pFirst = get_attrs[a++].val_ptr; + OSD_INFO("OSD_ATTR_RI_CLOCK [0x%02x%02x%02x%02x%02x%02x]\n", + ((char *)pFirst)[0], ((char *)pFirst)[1], + ((char *)pFirst)[2], ((char *)pFirst)[3], + ((char *)pFirst)[4], ((char *)pFirst)[5]); + + if (a < nelem) { /* IBM-OSD-SIM bug, Might not have it */ + unsigned len = get_attrs[a].len; + char sid_dump[32*4 + 2]; /* 2nibbles+space+ASCII */ + + hex_dump_to_buffer(get_attrs[a].val_ptr, len, 32, 1, + sid_dump, sizeof(sid_dump), true); + OSD_INFO("OSD_ATTR_RI_OSD_SYSTEM_ID(%d) [%s]\n", len, sid_dump); + a++; + } +out: + osd_end_request(or); + return ret; +} + +int osd_auto_detect_ver(struct osd_dev *od, void *caps) +{ + int ret; + + /* Auto-detect the osd version */ + ret = _osd_print_system_info(od, caps); + if (ret) { + osd_dev_set_ver(od, OSD_VER1); + OSD_DEBUG("converting to OSD1\n"); + ret = _osd_print_system_info(od, caps); + } + + return ret; +} +EXPORT_SYMBOL(osd_auto_detect_ver); + +static unsigned _osd_req_cdb_len(struct osd_request *or) +{ + return osd_req_is_ver1(or) ? OSDv1_TOTAL_CDB_LEN : OSD_TOTAL_CDB_LEN; +} + +static unsigned _osd_req_alist_elem_size(struct osd_request *or, unsigned len) +{ + return osd_req_is_ver1(or) ? + osdv1_attr_list_elem_size(len) : + osdv2_attr_list_elem_size(len); +} + +static unsigned _osd_req_alist_size(struct osd_request *or, void *list_head) +{ + return osd_req_is_ver1(or) ? + osdv1_list_size(list_head) : + osdv2_list_size(list_head); +} + +static unsigned _osd_req_sizeof_alist_header(struct osd_request *or) +{ + return osd_req_is_ver1(or) ? + sizeof(struct osdv1_attributes_list_header) : + sizeof(struct osdv2_attributes_list_header); +} + +static void _osd_req_set_alist_type(struct osd_request *or, + void *list, int list_type) +{ + if (osd_req_is_ver1(or)) { + struct osdv1_attributes_list_header *attr_list = list; + + memset(attr_list, 0, sizeof(*attr_list)); + attr_list->type = list_type; + } else { + struct osdv2_attributes_list_header *attr_list = list; + + memset(attr_list, 0, sizeof(*attr_list)); + attr_list->type = list_type; + } +} + +static bool _osd_req_is_alist_type(struct osd_request *or, + void *list, int list_type) +{ + if (!list) + return false; + + if (osd_req_is_ver1(or)) { + struct osdv1_attributes_list_header *attr_list = list; + + return attr_list->type == list_type; + } else { + struct osdv2_attributes_list_header *attr_list = list; + + return attr_list->type == list_type; + } +} + +/* This is for List-objects not Attributes-Lists */ +static void _osd_req_encode_olist(struct osd_request *or, + struct osd_obj_id_list *list) +{ + struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb); + + if (osd_req_is_ver1(or)) { + cdbh->v1.list_identifier = list->list_identifier; + cdbh->v1.start_address = list->continuation_id; + } else { + cdbh->v2.list_identifier = list->list_identifier; + cdbh->v2.start_address = list->continuation_id; + } +} + +static osd_cdb_offset osd_req_encode_offset(struct osd_request *or, + u64 offset, unsigned *padding) +{ + return __osd_encode_offset(offset, padding, + osd_req_is_ver1(or) ? + OSDv1_OFFSET_MIN_SHIFT : OSD_OFFSET_MIN_SHIFT, + OSD_OFFSET_MAX_SHIFT); +} + +static struct osd_security_parameters * +_osd_req_sec_params(struct osd_request *or) +{ + struct osd_cdb *ocdb = &or->cdb; + + if (osd_req_is_ver1(or)) + return &ocdb->v1.sec_params; + else + return &ocdb->v2.sec_params; +} + +void osd_dev_init(struct osd_dev *osdd, struct scsi_device *scsi_device) +{ + memset(osdd, 0, sizeof(*osdd)); + osdd->scsi_device = scsi_device; + osdd->def_timeout = BLK_DEFAULT_SG_TIMEOUT; +#ifdef OSD_VER1_SUPPORT + osdd->version = OSD_VER2; +#endif + /* TODO: Allocate pools for osd_request attributes ... */ +} +EXPORT_SYMBOL(osd_dev_init); + +void osd_dev_fini(struct osd_dev *osdd) +{ + /* TODO: De-allocate pools */ + + osdd->scsi_device = NULL; +} +EXPORT_SYMBOL(osd_dev_fini); + +static struct osd_request *_osd_request_alloc(gfp_t gfp) +{ + struct osd_request *or; + + /* TODO: Use mempool with one saved request */ + or = kzalloc(sizeof(*or), gfp); + return or; +} + +static void _osd_request_free(struct osd_request *or) +{ + kfree(or); +} + +struct osd_request *osd_start_request(struct osd_dev *dev, gfp_t gfp) +{ + struct osd_request *or; + + or = _osd_request_alloc(gfp); + if (!or) + return NULL; + + or->osd_dev = dev; + or->alloc_flags = gfp; + or->timeout = dev->def_timeout; + or->retries = OSD_REQ_RETRIES; + + return or; +} +EXPORT_SYMBOL(osd_start_request); + +/* + * If osd_finalize_request() was called but the request was not executed through + * the block layer, then we must release BIOs. + */ +static void _abort_unexecuted_bios(struct request *rq) +{ + struct bio *bio; + + while ((bio = rq->bio) != NULL) { + rq->bio = bio->bi_next; + bio_endio(bio, 0); + } +} + +static void _osd_free_seg(struct osd_request *or __unused, + struct _osd_req_data_segment *seg) +{ + if (!seg->buff || !seg->alloc_size) + return; + + kfree(seg->buff); + seg->buff = NULL; + seg->alloc_size = 0; +} + +void osd_end_request(struct osd_request *or) +{ + struct request *rq = or->request; + + _osd_free_seg(or, &or->set_attr); + _osd_free_seg(or, &or->enc_get_attr); + _osd_free_seg(or, &or->get_attr); + + if (rq) { + if (rq->next_rq) { + _abort_unexecuted_bios(rq->next_rq); + blk_put_request(rq->next_rq); + } + + _abort_unexecuted_bios(rq); + blk_put_request(rq); + } + _osd_request_free(or); +} +EXPORT_SYMBOL(osd_end_request); + +int osd_execute_request(struct osd_request *or) +{ + return blk_execute_rq(or->request->q, NULL, or->request, 0); +} +EXPORT_SYMBOL(osd_execute_request); + +static void osd_request_async_done(struct request *req, int error) +{ + struct osd_request *or = req->end_io_data; + + or->async_error = error; + + if (error) + OSD_DEBUG("osd_request_async_done error recieved %d\n", error); + + if (or->async_done) + or->async_done(or, or->async_private); + else + osd_end_request(or); +} + +int osd_execute_request_async(struct osd_request *or, + osd_req_done_fn *done, void *private) +{ + or->request->end_io_data = or; + or->async_private = private; + or->async_done = done; + + blk_execute_rq_nowait(or->request->q, NULL, or->request, 0, + osd_request_async_done); + return 0; +} +EXPORT_SYMBOL(osd_execute_request_async); + +u8 sg_out_pad_buffer[1 << OSDv1_OFFSET_MIN_SHIFT]; +u8 sg_in_pad_buffer[1 << OSDv1_OFFSET_MIN_SHIFT]; + +static int _osd_realloc_seg(struct osd_request *or, + struct _osd_req_data_segment *seg, unsigned max_bytes) +{ + void *buff; + + if (seg->alloc_size >= max_bytes) + return 0; + + buff = krealloc(seg->buff, max_bytes, or->alloc_flags); + if (!buff) { + OSD_ERR("Failed to Realloc %d-bytes was-%d\n", max_bytes, + seg->alloc_size); + return -ENOMEM; + } + + memset(buff + seg->alloc_size, 0, max_bytes - seg->alloc_size); + seg->buff = buff; + seg->alloc_size = max_bytes; + return 0; +} + +static int _alloc_set_attr_list(struct osd_request *or, + const struct osd_attr *oa, unsigned nelem, unsigned add_bytes) +{ + unsigned total_bytes = add_bytes; + + for (; nelem; --nelem, ++oa) + total_bytes += _osd_req_alist_elem_size(or, oa->len); + + OSD_DEBUG("total_bytes=%d\n", total_bytes); + return _osd_realloc_seg(or, &or->set_attr, total_bytes); +} + +static int _alloc_get_attr_desc(struct osd_request *or, unsigned max_bytes) +{ + OSD_DEBUG("total_bytes=%d\n", max_bytes); + return _osd_realloc_seg(or, &or->enc_get_attr, max_bytes); +} + +static int _alloc_get_attr_list(struct osd_request *or) +{ + OSD_DEBUG("total_bytes=%d\n", or->get_attr.total_bytes); + return _osd_realloc_seg(or, &or->get_attr, or->get_attr.total_bytes); +} + +/* + * Common to all OSD commands + */ + +static void _osdv1_req_encode_common(struct osd_request *or, + __be16 act, const struct osd_obj_id *obj, u64 offset, u64 len) +{ + struct osdv1_cdb *ocdb = &or->cdb.v1; + + /* + * For speed, the commands + * OSD_ACT_PERFORM_SCSI_COMMAND , V1 0x8F7E, V2 0x8F7C + * OSD_ACT_SCSI_TASK_MANAGEMENT , V1 0x8F7F, V2 0x8F7D + * are not supported here. Should pass zero and set after the call + */ + act &= cpu_to_be16(~0x0080); /* V1 action code */ + + OSD_DEBUG("OSDv1 execute opcode 0x%x\n", be16_to_cpu(act)); + + ocdb->h.varlen_cdb.opcode = VARIABLE_LENGTH_CMD; + ocdb->h.varlen_cdb.additional_cdb_length = OSD_ADDITIONAL_CDB_LENGTH; + ocdb->h.varlen_cdb.service_action = act; + + ocdb->h.partition = cpu_to_be64(obj->partition); + ocdb->h.object = cpu_to_be64(obj->id); + ocdb->h.v1.length = cpu_to_be64(len); + ocdb->h.v1.start_address = cpu_to_be64(offset); +} + +static void _osdv2_req_encode_common(struct osd_request *or, + __be16 act, const struct osd_obj_id *obj, u64 offset, u64 len) +{ + struct osdv2_cdb *ocdb = &or->cdb.v2; + + OSD_DEBUG("OSDv2 execute opcode 0x%x\n", be16_to_cpu(act)); + + ocdb->h.varlen_cdb.opcode = VARIABLE_LENGTH_CMD; + ocdb->h.varlen_cdb.additional_cdb_length = OSD_ADDITIONAL_CDB_LENGTH; + ocdb->h.varlen_cdb.service_action = act; + + ocdb->h.partition = cpu_to_be64(obj->partition); + ocdb->h.object = cpu_to_be64(obj->id); + ocdb->h.v2.length = cpu_to_be64(len); + ocdb->h.v2.start_address = cpu_to_be64(offset); +} + +static void _osd_req_encode_common(struct osd_request *or, + __be16 act, const struct osd_obj_id *obj, u64 offset, u64 len) +{ + if (osd_req_is_ver1(or)) + _osdv1_req_encode_common(or, act, obj, offset, len); + else + _osdv2_req_encode_common(or, act, obj, offset, len); +} + +/* + * Device commands + */ +/*TODO: void osd_req_set_master_seed_xchg(struct osd_request *, ...); */ +/*TODO: void osd_req_set_master_key(struct osd_request *, ...); */ + +void osd_req_format(struct osd_request *or, u64 tot_capacity) +{ + _osd_req_encode_common(or, OSD_ACT_FORMAT_OSD, &osd_root_object, 0, + tot_capacity); +} +EXPORT_SYMBOL(osd_req_format); + +int osd_req_list_dev_partitions(struct osd_request *or, + osd_id initial_id, struct osd_obj_id_list *list, unsigned nelem) +{ + return osd_req_list_partition_objects(or, 0, initial_id, list, nelem); +} +EXPORT_SYMBOL(osd_req_list_dev_partitions); + +static void _osd_req_encode_flush(struct osd_request *or, + enum osd_options_flush_scope_values op) +{ + struct osd_cdb_head *ocdb = osd_cdb_head(&or->cdb); + + ocdb->command_specific_options = op; +} + +void osd_req_flush_obsd(struct osd_request *or, + enum osd_options_flush_scope_values op) +{ + _osd_req_encode_common(or, OSD_ACT_FLUSH_OSD, &osd_root_object, 0, 0); + _osd_req_encode_flush(or, op); +} +EXPORT_SYMBOL(osd_req_flush_obsd); + +/*TODO: void osd_req_perform_scsi_command(struct osd_request *, + const u8 *cdb, ...); */ +/*TODO: void osd_req_task_management(struct osd_request *, ...); */ + +/* + * Partition commands + */ +static void _osd_req_encode_partition(struct osd_request *or, + __be16 act, osd_id partition) +{ + struct osd_obj_id par = { + .partition = partition, + .id = 0, + }; + + _osd_req_encode_common(or, act, &par, 0, 0); +} + +void osd_req_create_partition(struct osd_request *or, osd_id partition) +{ + _osd_req_encode_partition(or, OSD_ACT_CREATE_PARTITION, partition); +} +EXPORT_SYMBOL(osd_req_create_partition); + +void osd_req_remove_partition(struct osd_request *or, osd_id partition) +{ + _osd_req_encode_partition(or, OSD_ACT_REMOVE_PARTITION, partition); +} +EXPORT_SYMBOL(osd_req_remove_partition); + +/*TODO: void osd_req_set_partition_key(struct osd_request *, + osd_id partition, u8 new_key_id[OSD_CRYPTO_KEYID_SIZE], + u8 seed[OSD_CRYPTO_SEED_SIZE]); */ + +static int _osd_req_list_objects(struct osd_request *or, + __be16 action, const struct osd_obj_id *obj, osd_id initial_id, + struct osd_obj_id_list *list, unsigned nelem) +{ + struct request_queue *q = or->osd_dev->scsi_device->request_queue; + u64 len = nelem * sizeof(osd_id) + sizeof(*list); + struct bio *bio; + + _osd_req_encode_common(or, action, obj, (u64)initial_id, len); + + if (list->list_identifier) + _osd_req_encode_olist(or, list); + + WARN_ON(or->in.bio); + bio = bio_map_kern(q, list, len, or->alloc_flags); + if (!bio) { + OSD_ERR("!!! Failed to allocate list_objects BIO\n"); + return -ENOMEM; + } + + bio->bi_rw &= ~(1 << BIO_RW); + or->in.bio = bio; + or->in.total_bytes = bio->bi_size; + return 0; +} + +int osd_req_list_partition_collections(struct osd_request *or, + osd_id partition, osd_id initial_id, struct osd_obj_id_list *list, + unsigned nelem) +{ + struct osd_obj_id par = { + .partition = partition, + .id = 0, + }; + + return osd_req_list_collection_objects(or, &par, initial_id, list, + nelem); +} +EXPORT_SYMBOL(osd_req_list_partition_collections); + +int osd_req_list_partition_objects(struct osd_request *or, + osd_id partition, osd_id initial_id, struct osd_obj_id_list *list, + unsigned nelem) +{ + struct osd_obj_id par = { + .partition = partition, + .id = 0, + }; + + return _osd_req_list_objects(or, OSD_ACT_LIST, &par, initial_id, list, + nelem); +} +EXPORT_SYMBOL(osd_req_list_partition_objects); + +void osd_req_flush_partition(struct osd_request *or, + osd_id partition, enum osd_options_flush_scope_values op) +{ + _osd_req_encode_partition(or, OSD_ACT_FLUSH_PARTITION, partition); + _osd_req_encode_flush(or, op); +} +EXPORT_SYMBOL(osd_req_flush_partition); + +/* + * Collection commands + */ +/*TODO: void osd_req_create_collection(struct osd_request *, + const struct osd_obj_id *); */ +/*TODO: void osd_req_remove_collection(struct osd_request *, + const struct osd_obj_id *); */ + +int osd_req_list_collection_objects(struct osd_request *or, + const struct osd_obj_id *obj, osd_id initial_id, + struct osd_obj_id_list *list, unsigned nelem) +{ + return _osd_req_list_objects(or, OSD_ACT_LIST_COLLECTION, obj, + initial_id, list, nelem); +} +EXPORT_SYMBOL(osd_req_list_collection_objects); + +/*TODO: void query(struct osd_request *, ...); V2 */ + +void osd_req_flush_collection(struct osd_request *or, + const struct osd_obj_id *obj, enum osd_options_flush_scope_values op) +{ + _osd_req_encode_common(or, OSD_ACT_FLUSH_PARTITION, obj, 0, 0); + _osd_req_encode_flush(or, op); +} +EXPORT_SYMBOL(osd_req_flush_collection); + +/*TODO: void get_member_attrs(struct osd_request *, ...); V2 */ +/*TODO: void set_member_attrs(struct osd_request *, ...); V2 */ + +/* + * Object commands + */ +void osd_req_create_object(struct osd_request *or, struct osd_obj_id *obj) +{ + _osd_req_encode_common(or, OSD_ACT_CREATE, obj, 0, 0); +} +EXPORT_SYMBOL(osd_req_create_object); + +void osd_req_remove_object(struct osd_request *or, struct osd_obj_id *obj) +{ + _osd_req_encode_common(or, OSD_ACT_REMOVE, obj, 0, 0); +} +EXPORT_SYMBOL(osd_req_remove_object); + + +/*TODO: void osd_req_create_multi(struct osd_request *or, + struct osd_obj_id *first, struct osd_obj_id_list *list, unsigned nelem); +*/ + +void osd_req_write(struct osd_request *or, + const struct osd_obj_id *obj, struct bio *bio, u64 offset) +{ + _osd_req_encode_common(or, OSD_ACT_WRITE, obj, offset, bio->bi_size); + WARN_ON(or->out.bio || or->out.total_bytes); + bio->bi_rw |= (1 << BIO_RW); + or->out.bio = bio; + or->out.total_bytes = bio->bi_size; +} +EXPORT_SYMBOL(osd_req_write); + +/*TODO: void osd_req_append(struct osd_request *, + const struct osd_obj_id *, struct bio *data_out); */ +/*TODO: void osd_req_create_write(struct osd_request *, + const struct osd_obj_id *, struct bio *data_out, u64 offset); */ +/*TODO: void osd_req_clear(struct osd_request *, + const struct osd_obj_id *, u64 offset, u64 len); */ +/*TODO: void osd_req_punch(struct osd_request *, + const struct osd_obj_id *, u64 offset, u64 len); V2 */ + +void osd_req_flush_object(struct osd_request *or, + const struct osd_obj_id *obj, enum osd_options_flush_scope_values op, + /*V2*/ u64 offset, /*V2*/ u64 len) +{ + if (unlikely(osd_req_is_ver1(or) && (offset || len))) { + OSD_DEBUG("OSD Ver1 flush on specific range ignored\n"); + offset = 0; + len = 0; + } + + _osd_req_encode_common(or, OSD_ACT_FLUSH, obj, offset, len); + _osd_req_encode_flush(or, op); +} +EXPORT_SYMBOL(osd_req_flush_object); + +void osd_req_read(struct osd_request *or, + const struct osd_obj_id *obj, struct bio *bio, u64 offset) +{ + _osd_req_encode_common(or, OSD_ACT_READ, obj, offset, bio->bi_size); + WARN_ON(or->in.bio || or->in.total_bytes); + bio->bi_rw &= ~(1 << BIO_RW); + or->in.bio = bio; + or->in.total_bytes = bio->bi_size; +} +EXPORT_SYMBOL(osd_req_read); + +void osd_req_get_attributes(struct osd_request *or, + const struct osd_obj_id *obj) +{ + _osd_req_encode_common(or, OSD_ACT_GET_ATTRIBUTES, obj, 0, 0); +} +EXPORT_SYMBOL(osd_req_get_attributes); + +void osd_req_set_attributes(struct osd_request *or, + const struct osd_obj_id *obj) +{ + _osd_req_encode_common(or, OSD_ACT_SET_ATTRIBUTES, obj, 0, 0); +} +EXPORT_SYMBOL(osd_req_set_attributes); + +/* + * Attributes List-mode + */ + +int osd_req_add_set_attr_list(struct osd_request *or, + const struct osd_attr *oa, unsigned nelem) +{ + unsigned total_bytes = or->set_attr.total_bytes; + void *attr_last; + int ret; + + if (or->attributes_mode && + or->attributes_mode != OSD_CDB_GET_SET_ATTR_LISTS) { + WARN_ON(1); + return -EINVAL; + } + or->attributes_mode = OSD_CDB_GET_SET_ATTR_LISTS; + + if (!total_bytes) { /* first-time: allocate and put list header */ + total_bytes = _osd_req_sizeof_alist_header(or); + ret = _alloc_set_attr_list(or, oa, nelem, total_bytes); + if (ret) + return ret; + _osd_req_set_alist_type(or, or->set_attr.buff, + OSD_ATTR_LIST_SET_RETRIEVE); + } + attr_last = or->set_attr.buff + total_bytes; + + for (; nelem; --nelem) { + struct osd_attributes_list_element *attr; + unsigned elem_size = _osd_req_alist_elem_size(or, oa->len); + + total_bytes += elem_size; + if (unlikely(or->set_attr.alloc_size < total_bytes)) { + or->set_attr.total_bytes = total_bytes - elem_size; + ret = _alloc_set_attr_list(or, oa, nelem, total_bytes); + if (ret) + return ret; + attr_last = + or->set_attr.buff + or->set_attr.total_bytes; + } + + attr = attr_last; + attr->attr_page = cpu_to_be32(oa->attr_page); + attr->attr_id = cpu_to_be32(oa->attr_id); + attr->attr_bytes = cpu_to_be16(oa->len); + memcpy(attr->attr_val, oa->val_ptr, oa->len); + + attr_last += elem_size; + ++oa; + } + + or->set_attr.total_bytes = total_bytes; + return 0; +} +EXPORT_SYMBOL(osd_req_add_set_attr_list); + +static int _append_map_kern(struct request *req, + void *buff, unsigned len, gfp_t flags) +{ + struct bio *bio; + int ret; + + bio = bio_map_kern(req->q, buff, len, flags); + if (IS_ERR(bio)) { + OSD_ERR("Failed bio_map_kern(%p, %d) => %ld\n", buff, len, + PTR_ERR(bio)); + return PTR_ERR(bio); + } + ret = blk_rq_append_bio(req->q, req, bio); + if (ret) { + OSD_ERR("Failed blk_rq_append_bio(%p) => %d\n", bio, ret); + bio_put(bio); + } + return ret; +} + +static int _req_append_segment(struct osd_request *or, + unsigned padding, struct _osd_req_data_segment *seg, + struct _osd_req_data_segment *last_seg, struct _osd_io_info *io) +{ + void *pad_buff; + int ret; + + if (padding) { + /* check if we can just add it to last buffer */ + if (last_seg && + (padding <= last_seg->alloc_size - last_seg->total_bytes)) + pad_buff = last_seg->buff + last_seg->total_bytes; + else + pad_buff = io->pad_buff; + + ret = _append_map_kern(io->req, pad_buff, padding, + or->alloc_flags); + if (ret) + return ret; + io->total_bytes += padding; + } + + ret = _append_map_kern(io->req, seg->buff, seg->total_bytes, + or->alloc_flags); + if (ret) + return ret; + + io->total_bytes += seg->total_bytes; + OSD_DEBUG("padding=%d buff=%p total_bytes=%d\n", padding, seg->buff, + seg->total_bytes); + return 0; +} + +static int _osd_req_finalize_set_attr_list(struct osd_request *or) +{ + struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb); + unsigned padding; + int ret; + + if (!or->set_attr.total_bytes) { + cdbh->attrs_list.set_attr_offset = OSD_OFFSET_UNUSED; + return 0; + } + + cdbh->attrs_list.set_attr_bytes = cpu_to_be32(or->set_attr.total_bytes); + cdbh->attrs_list.set_attr_offset = + osd_req_encode_offset(or, or->out.total_bytes, &padding); + + ret = _req_append_segment(or, padding, &or->set_attr, + or->out.last_seg, &or->out); + if (ret) + return ret; + + or->out.last_seg = &or->set_attr; + return 0; +} + +int osd_req_add_get_attr_list(struct osd_request *or, + const struct osd_attr *oa, unsigned nelem) +{ + unsigned total_bytes = or->enc_get_attr.total_bytes; + void *attr_last; + int ret; + + if (or->attributes_mode && + or->attributes_mode != OSD_CDB_GET_SET_ATTR_LISTS) { + WARN_ON(1); + return -EINVAL; + } + or->attributes_mode = OSD_CDB_GET_SET_ATTR_LISTS; + + /* first time calc data-in list header size */ + if (!or->get_attr.total_bytes) + or->get_attr.total_bytes = _osd_req_sizeof_alist_header(or); + + /* calc data-out info */ + if (!total_bytes) { /* first-time: allocate and put list header */ + unsigned max_bytes; + + total_bytes = _osd_req_sizeof_alist_header(or); + max_bytes = total_bytes + + nelem * sizeof(struct osd_attributes_list_attrid); + ret = _alloc_get_attr_desc(or, max_bytes); + if (ret) + return ret; + + _osd_req_set_alist_type(or, or->enc_get_attr.buff, + OSD_ATTR_LIST_GET); + } + attr_last = or->enc_get_attr.buff + total_bytes; + + for (; nelem; --nelem) { + struct osd_attributes_list_attrid *attrid; + const unsigned cur_size = sizeof(*attrid); + + total_bytes += cur_size; + if (unlikely(or->enc_get_attr.alloc_size < total_bytes)) { + or->enc_get_attr.total_bytes = total_bytes - cur_size; + ret = _alloc_get_attr_desc(or, + total_bytes + nelem * sizeof(*attrid)); + if (ret) + return ret; + attr_last = or->enc_get_attr.buff + + or->enc_get_attr.total_bytes; + } + + attrid = attr_last; + attrid->attr_page = cpu_to_be32(oa->attr_page); + attrid->attr_id = cpu_to_be32(oa->attr_id); + + attr_last += cur_size; + + /* calc data-in size */ + or->get_attr.total_bytes += + _osd_req_alist_elem_size(or, oa->len); + ++oa; + } + + or->enc_get_attr.total_bytes = total_bytes; + + OSD_DEBUG( + "get_attr.total_bytes=%u(%u) enc_get_attr.total_bytes=%u(%Zu)\n", + or->get_attr.total_bytes, + or->get_attr.total_bytes - _osd_req_sizeof_alist_header(or), + or->enc_get_attr.total_bytes, + (or->enc_get_attr.total_bytes - _osd_req_sizeof_alist_header(or)) + / sizeof(struct osd_attributes_list_attrid)); + + return 0; +} +EXPORT_SYMBOL(osd_req_add_get_attr_list); + +static int _osd_req_finalize_get_attr_list(struct osd_request *or) +{ + struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb); + unsigned out_padding; + unsigned in_padding; + int ret; + + if (!or->enc_get_attr.total_bytes) { + cdbh->attrs_list.get_attr_desc_offset = OSD_OFFSET_UNUSED; + cdbh->attrs_list.get_attr_offset = OSD_OFFSET_UNUSED; + return 0; + } + + ret = _alloc_get_attr_list(or); + if (ret) + return ret; + + /* The out-going buffer info update */ + OSD_DEBUG("out-going\n"); + cdbh->attrs_list.get_attr_desc_bytes = + cpu_to_be32(or->enc_get_attr.total_bytes); + + cdbh->attrs_list.get_attr_desc_offset = + osd_req_encode_offset(or, or->out.total_bytes, &out_padding); + + ret = _req_append_segment(or, out_padding, &or->enc_get_attr, + or->out.last_seg, &or->out); + if (ret) + return ret; + or->out.last_seg = &or->enc_get_attr; + + /* The incoming buffer info update */ + OSD_DEBUG("in-coming\n"); + cdbh->attrs_list.get_attr_alloc_length = + cpu_to_be32(or->get_attr.total_bytes); + + cdbh->attrs_list.get_attr_offset = + osd_req_encode_offset(or, or->in.total_bytes, &in_padding); + + ret = _req_append_segment(or, in_padding, &or->get_attr, NULL, + &or->in); + if (ret) + return ret; + or->in.last_seg = &or->get_attr; + + return 0; +} + +int osd_req_decode_get_attr_list(struct osd_request *or, + struct osd_attr *oa, int *nelem, void **iterator) +{ + unsigned cur_bytes, returned_bytes; + int n; + const unsigned sizeof_attr_list = _osd_req_sizeof_alist_header(or); + void *cur_p; + + if (!_osd_req_is_alist_type(or, or->get_attr.buff, + OSD_ATTR_LIST_SET_RETRIEVE)) { + oa->attr_page = 0; + oa->attr_id = 0; + oa->val_ptr = NULL; + oa->len = 0; + *iterator = NULL; + return 0; + } + + if (*iterator) { + BUG_ON((*iterator < or->get_attr.buff) || + (or->get_attr.buff + or->get_attr.alloc_size < *iterator)); + cur_p = *iterator; + cur_bytes = (*iterator - or->get_attr.buff) - sizeof_attr_list; + returned_bytes = or->get_attr.total_bytes; + } else { /* first time decode the list header */ + cur_bytes = sizeof_attr_list; + returned_bytes = _osd_req_alist_size(or, or->get_attr.buff) + + sizeof_attr_list; + + cur_p = or->get_attr.buff + sizeof_attr_list; + + if (returned_bytes > or->get_attr.alloc_size) { + OSD_DEBUG("target report: space was not big enough! " + "Allocate=%u Needed=%u\n", + or->get_attr.alloc_size, + returned_bytes + sizeof_attr_list); + + returned_bytes = + or->get_attr.alloc_size - sizeof_attr_list; + } + or->get_attr.total_bytes = returned_bytes; + } + + for (n = 0; (n < *nelem) && (cur_bytes < returned_bytes); ++n) { + struct osd_attributes_list_element *attr = cur_p; + unsigned inc; + + oa->len = be16_to_cpu(attr->attr_bytes); + inc = _osd_req_alist_elem_size(or, oa->len); + OSD_DEBUG("oa->len=%d inc=%d cur_bytes=%d\n", + oa->len, inc, cur_bytes); + cur_bytes += inc; + if (cur_bytes > returned_bytes) { + OSD_ERR("BAD FOOD from target. list not valid!" + "c=%d r=%d n=%d\n", + cur_bytes, returned_bytes, n); + oa->val_ptr = NULL; + break; + } + + oa->attr_page = be32_to_cpu(attr->attr_page); + oa->attr_id = be32_to_cpu(attr->attr_id); + oa->val_ptr = attr->attr_val; + + cur_p += inc; + ++oa; + } + + *iterator = (returned_bytes - cur_bytes) ? cur_p : NULL; + *nelem = n; + return returned_bytes - cur_bytes; +} +EXPORT_SYMBOL(osd_req_decode_get_attr_list); + +/* + * Attributes Page-mode + */ + +int osd_req_add_get_attr_page(struct osd_request *or, + u32 page_id, void *attar_page, unsigned max_page_len, + const struct osd_attr *set_one_attr) +{ + struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb); + + if (or->attributes_mode && + or->attributes_mode != OSD_CDB_GET_ATTR_PAGE_SET_ONE) { + WARN_ON(1); + return -EINVAL; + } + or->attributes_mode = OSD_CDB_GET_ATTR_PAGE_SET_ONE; + + or->get_attr.buff = attar_page; + or->get_attr.total_bytes = max_page_len; + + or->set_attr.buff = set_one_attr->val_ptr; + or->set_attr.total_bytes = set_one_attr->len; + + cdbh->attrs_page.get_attr_page = cpu_to_be32(page_id); + cdbh->attrs_page.get_attr_alloc_length = cpu_to_be32(max_page_len); + /* ocdb->attrs_page.get_attr_offset; */ + + cdbh->attrs_page.set_attr_page = cpu_to_be32(set_one_attr->attr_page); + cdbh->attrs_page.set_attr_id = cpu_to_be32(set_one_attr->attr_id); + cdbh->attrs_page.set_attr_length = cpu_to_be32(set_one_attr->len); + /* ocdb->attrs_page.set_attr_offset; */ + return 0; +} +EXPORT_SYMBOL(osd_req_add_get_attr_page); + +static int _osd_req_finalize_attr_page(struct osd_request *or) +{ + struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb); + unsigned in_padding, out_padding; + int ret; + + /* returned page */ + cdbh->attrs_page.get_attr_offset = + osd_req_encode_offset(or, or->in.total_bytes, &in_padding); + + ret = _req_append_segment(or, in_padding, &or->get_attr, NULL, + &or->in); + if (ret) + return ret; + + /* set one value */ + cdbh->attrs_page.set_attr_offset = + osd_req_encode_offset(or, or->out.total_bytes, &out_padding); + + ret = _req_append_segment(or, out_padding, &or->enc_get_attr, NULL, + &or->out); + return ret; +} + +static int _osd_req_finalize_data_integrity(struct osd_request *or, + bool has_in, bool has_out, const u8 *cap_key) +{ + struct osd_security_parameters *sec_parms = _osd_req_sec_params(or); + int ret; + + if (!osd_is_sec_alldata(sec_parms)) + return 0; + + if (has_out) { + struct _osd_req_data_segment seg = { + .buff = &or->out_data_integ, + .total_bytes = sizeof(or->out_data_integ), + }; + unsigned pad; + + or->out_data_integ.data_bytes = cpu_to_be64( + or->out.bio ? or->out.bio->bi_size : 0); + or->out_data_integ.set_attributes_bytes = cpu_to_be64( + or->set_attr.total_bytes); + or->out_data_integ.get_attributes_bytes = cpu_to_be64( + or->enc_get_attr.total_bytes); + + sec_parms->data_out_integrity_check_offset = + osd_req_encode_offset(or, or->out.total_bytes, &pad); + + ret = _req_append_segment(or, pad, &seg, or->out.last_seg, + &or->out); + if (ret) + return ret; + or->out.last_seg = NULL; + + /* they are now all chained to request sign them all together */ + osd_sec_sign_data(&or->out_data_integ, or->out.req->bio, + cap_key); + } + + if (has_in) { + struct _osd_req_data_segment seg = { + .buff = &or->in_data_integ, + .total_bytes = sizeof(or->in_data_integ), + }; + unsigned pad; + + sec_parms->data_in_integrity_check_offset = + osd_req_encode_offset(or, or->in.total_bytes, &pad); + + ret = _req_append_segment(or, pad, &seg, or->in.last_seg, + &or->in); + if (ret) + return ret; + + or->in.last_seg = NULL; + } + + return 0; +} + +/* + * osd_finalize_request and helpers + */ + +static int _init_blk_request(struct osd_request *or, + bool has_in, bool has_out) +{ + gfp_t flags = or->alloc_flags; + struct scsi_device *scsi_device = or->osd_dev->scsi_device; + struct request_queue *q = scsi_device->request_queue; + struct request *req; + int ret = -ENOMEM; + + req = blk_get_request(q, has_out, flags); + if (!req) + goto out; + + or->request = req; + req->cmd_type = REQ_TYPE_BLOCK_PC; + req->timeout = or->timeout; + req->retries = or->retries; + req->sense = or->sense; + req->sense_len = 0; + + if (has_out) { + or->out.req = req; + if (has_in) { + /* allocate bidi request */ + req = blk_get_request(q, READ, flags); + if (!req) { + OSD_DEBUG("blk_get_request for bidi failed\n"); + goto out; + } + req->cmd_type = REQ_TYPE_BLOCK_PC; + or->in.req = or->request->next_rq = req; + } + } else if (has_in) + or->in.req = req; + + ret = 0; +out: + OSD_DEBUG("or=%p has_in=%d has_out=%d => %d, %p\n", + or, has_in, has_out, ret, or->request); + return ret; +} + +int osd_finalize_request(struct osd_request *or, + u8 options, const void *cap, const u8 *cap_key) +{ + struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb); + bool has_in, has_out; + int ret; + + if (options & OSD_REQ_FUA) + cdbh->options |= OSD_CDB_FUA; + + if (options & OSD_REQ_DPO) + cdbh->options |= OSD_CDB_DPO; + + if (options & OSD_REQ_BYPASS_TIMESTAMPS) + cdbh->timestamp_control = OSD_CDB_BYPASS_TIMESTAMPS; + + osd_set_caps(&or->cdb, cap); + + has_in = or->in.bio || or->get_attr.total_bytes; + has_out = or->out.bio || or->set_attr.total_bytes || + or->enc_get_attr.total_bytes; + + ret = _init_blk_request(or, has_in, has_out); + if (ret) { + OSD_DEBUG("_init_blk_request failed\n"); + return ret; + } + + if (or->out.bio) { + ret = blk_rq_append_bio(or->request->q, or->out.req, + or->out.bio); + if (ret) { + OSD_DEBUG("blk_rq_append_bio out failed\n"); + return ret; + } + OSD_DEBUG("out bytes=%llu (bytes_req=%u)\n", + _LLU(or->out.total_bytes), or->out.req->data_len); + } + if (or->in.bio) { + ret = blk_rq_append_bio(or->request->q, or->in.req, or->in.bio); + if (ret) { + OSD_DEBUG("blk_rq_append_bio in failed\n"); + return ret; + } + OSD_DEBUG("in bytes=%llu (bytes_req=%u)\n", + _LLU(or->in.total_bytes), or->in.req->data_len); + } + + or->out.pad_buff = sg_out_pad_buffer; + or->in.pad_buff = sg_in_pad_buffer; + + if (!or->attributes_mode) + or->attributes_mode = OSD_CDB_GET_SET_ATTR_LISTS; + cdbh->command_specific_options |= or->attributes_mode; + if (or->attributes_mode == OSD_CDB_GET_ATTR_PAGE_SET_ONE) { + ret = _osd_req_finalize_attr_page(or); + } else { + /* TODO: I think that for the GET_ATTR command these 2 should + * be reversed to keep them in execution order (for embeded + * targets with low memory footprint) + */ + ret = _osd_req_finalize_set_attr_list(or); + if (ret) { + OSD_DEBUG("_osd_req_finalize_set_attr_list failed\n"); + return ret; + } + + ret = _osd_req_finalize_get_attr_list(or); + if (ret) { + OSD_DEBUG("_osd_req_finalize_get_attr_list failed\n"); + return ret; + } + } + + ret = _osd_req_finalize_data_integrity(or, has_in, has_out, cap_key); + if (ret) + return ret; + + osd_sec_sign_cdb(&or->cdb, cap_key); + + or->request->cmd = or->cdb.buff; + or->request->cmd_len = _osd_req_cdb_len(or); + + return 0; +} +EXPORT_SYMBOL(osd_finalize_request); + +#define OSD_SENSE_PRINT1(fmt, a...) \ + do { \ + if (__cur_sense_need_output) \ + OSD_ERR(fmt, ##a); \ + } while (0) + +#define OSD_SENSE_PRINT2(fmt, a...) OSD_SENSE_PRINT1(" " fmt, ##a) + +int osd_req_decode_sense_full(struct osd_request *or, + struct osd_sense_info *osi, bool silent, + struct osd_obj_id *bad_obj_list __unused, int max_obj __unused, + struct osd_attr *bad_attr_list, int max_attr) +{ + int sense_len, original_sense_len; + struct osd_sense_info local_osi; + struct scsi_sense_descriptor_based *ssdb; + void *cur_descriptor; +#if (CONFIG_SCSI_OSD_DPRINT_SENSE == 0) + const bool __cur_sense_need_output = false; +#else + bool __cur_sense_need_output = !silent; +#endif + + if (!or->request->errors) + return 0; + + ssdb = or->request->sense; + sense_len = or->request->sense_len; + if ((sense_len < (int)sizeof(*ssdb) || !ssdb->sense_key)) { + OSD_ERR("Block-layer returned error(0x%x) but " + "sense_len(%u) || key(%d) is empty\n", + or->request->errors, sense_len, ssdb->sense_key); + return -EIO; + } + + if ((ssdb->response_code != 0x72) && (ssdb->response_code != 0x73)) { + OSD_ERR("Unrecognized scsi sense: rcode=%x length=%d\n", + ssdb->response_code, sense_len); + return -EIO; + } + + osi = osi ? : &local_osi; + memset(osi, 0, sizeof(*osi)); + osi->key = ssdb->sense_key; + osi->additional_code = be16_to_cpu(ssdb->additional_sense_code); + original_sense_len = ssdb->additional_sense_length + 8; + +#if (CONFIG_SCSI_OSD_DPRINT_SENSE == 1) + if (__cur_sense_need_output) + __cur_sense_need_output = (osi->key > scsi_sk_recovered_error); +#endif + OSD_SENSE_PRINT1("Main Sense information key=0x%x length(%d, %d) " + "additional_code=0x%x\n", + osi->key, original_sense_len, sense_len, + osi->additional_code); + + if (original_sense_len < sense_len) + sense_len = original_sense_len; + + cur_descriptor = ssdb->ssd; + sense_len -= sizeof(*ssdb); + while (sense_len > 0) { + struct scsi_sense_descriptor *ssd = cur_descriptor; + int cur_len = ssd->additional_length + 2; + + sense_len -= cur_len; + + if (sense_len < 0) + break; /* sense was truncated */ + + switch (ssd->descriptor_type) { + case scsi_sense_information: + case scsi_sense_command_specific_information: + { + struct scsi_sense_command_specific_data_descriptor + *sscd = cur_descriptor; + + osi->command_info = + get_unaligned_be64(&sscd->information) ; + OSD_SENSE_PRINT2( + "command_specific_information 0x%llx \n", + _LLU(osi->command_info)); + break; + } + case scsi_sense_key_specific: + { + struct scsi_sense_key_specific_data_descriptor + *ssks = cur_descriptor; + + osi->sense_info = get_unaligned_be16(&ssks->value); + OSD_SENSE_PRINT2( + "sense_key_specific_information %u" + "sksv_cd_bpv_bp (0x%x)\n", + osi->sense_info, ssks->sksv_cd_bpv_bp); + break; + } + case osd_sense_object_identification: + { /*FIXME: Keep first not last, Store in array*/ + struct osd_sense_identification_data_descriptor + *osidd = cur_descriptor; + + osi->not_initiated_command_functions = + le32_to_cpu(osidd->not_initiated_functions); + osi->completed_command_functions = + le32_to_cpu(osidd->completed_functions); + osi->obj.partition = be64_to_cpu(osidd->partition_id); + osi->obj.id = be64_to_cpu(osidd->object_id); + OSD_SENSE_PRINT2( + "object_identification pid=0x%llx oid=0x%llx\n", + _LLU(osi->obj.partition), _LLU(osi->obj.id)); + OSD_SENSE_PRINT2( + "not_initiated_bits(%x) " + "completed_command_bits(%x)\n", + osi->not_initiated_command_functions, + osi->completed_command_functions); + break; + } + case osd_sense_response_integrity_check: + { + struct osd_sense_response_integrity_check_descriptor + *osricd = cur_descriptor; + const unsigned len = + sizeof(osricd->integrity_check_value); + char key_dump[len*4 + 2]; /* 2nibbles+space+ASCII */ + + hex_dump_to_buffer(osricd->integrity_check_value, len, + 32, 1, key_dump, sizeof(key_dump), true); + OSD_SENSE_PRINT2("response_integrity [%s]\n", key_dump); + } + case osd_sense_attribute_identification: + { + struct osd_sense_attributes_data_descriptor + *osadd = cur_descriptor; + int len = min(cur_len, sense_len); + int i = 0; + struct osd_sense_attr *pattr = osadd->sense_attrs; + + while (len < 0) { + u32 attr_page = be32_to_cpu(pattr->attr_page); + u32 attr_id = be32_to_cpu(pattr->attr_id); + + if (i++ == 0) { + osi->attr.attr_page = attr_page; + osi->attr.attr_id = attr_id; + } + + if (bad_attr_list && max_attr) { + bad_attr_list->attr_page = attr_page; + bad_attr_list->attr_id = attr_id; + bad_attr_list++; + max_attr--; + } + OSD_SENSE_PRINT2( + "osd_sense_attribute_identification" + "attr_page=0x%x attr_id=0x%x\n", + attr_page, attr_id); + } + } + /*These are not legal for OSD*/ + case scsi_sense_field_replaceable_unit: + OSD_SENSE_PRINT2("scsi_sense_field_replaceable_unit\n"); + break; + case scsi_sense_stream_commands: + OSD_SENSE_PRINT2("scsi_sense_stream_commands\n"); + break; + case scsi_sense_block_commands: + OSD_SENSE_PRINT2("scsi_sense_block_commands\n"); + break; + case scsi_sense_ata_return: + OSD_SENSE_PRINT2("scsi_sense_ata_return\n"); + break; + default: + if (ssd->descriptor_type <= scsi_sense_Reserved_last) + OSD_SENSE_PRINT2( + "scsi_sense Reserved descriptor (0x%x)", + ssd->descriptor_type); + else + OSD_SENSE_PRINT2( + "scsi_sense Vendor descriptor (0x%x)", + ssd->descriptor_type); + } + + cur_descriptor += cur_len; + } + + return (osi->key > scsi_sk_recovered_error) ? -EIO : 0; +} +EXPORT_SYMBOL(osd_req_decode_sense_full); + +/* + * Implementation of osd_sec.h API + * TODO: Move to a separate osd_sec.c file at a later stage. + */ + +enum { OSD_SEC_CAP_V1_ALL_CAPS = + OSD_SEC_CAP_APPEND | OSD_SEC_CAP_OBJ_MGMT | OSD_SEC_CAP_REMOVE | + OSD_SEC_CAP_CREATE | OSD_SEC_CAP_SET_ATTR | OSD_SEC_CAP_GET_ATTR | + OSD_SEC_CAP_WRITE | OSD_SEC_CAP_READ | OSD_SEC_CAP_POL_SEC | + OSD_SEC_CAP_GLOBAL | OSD_SEC_CAP_DEV_MGMT +}; + +enum { OSD_SEC_CAP_V2_ALL_CAPS = + OSD_SEC_CAP_V1_ALL_CAPS | OSD_SEC_CAP_QUERY | OSD_SEC_CAP_M_OBJECT +}; + +void osd_sec_init_nosec_doall_caps(void *caps, + const struct osd_obj_id *obj, bool is_collection, const bool is_v1) +{ + struct osd_capability *cap = caps; + u8 type; + u8 descriptor_type; + + if (likely(obj->id)) { + if (unlikely(is_collection)) { + type = OSD_SEC_OBJ_COLLECTION; + descriptor_type = is_v1 ? OSD_SEC_OBJ_DESC_OBJ : + OSD_SEC_OBJ_DESC_COL; + } else { + type = OSD_SEC_OBJ_USER; + descriptor_type = OSD_SEC_OBJ_DESC_OBJ; + } + WARN_ON(!obj->partition); + } else { + type = obj->partition ? OSD_SEC_OBJ_PARTITION : + OSD_SEC_OBJ_ROOT; + descriptor_type = OSD_SEC_OBJ_DESC_PAR; + } + + memset(cap, 0, sizeof(*cap)); + + cap->h.format = OSD_SEC_CAP_FORMAT_VER1; + cap->h.integrity_algorithm__key_version = 0; /* MAKE_BYTE(0, 0); */ + cap->h.security_method = OSD_SEC_NOSEC; +/* cap->expiration_time; + cap->AUDIT[30-10]; + cap->discriminator[42-30]; + cap->object_created_time; */ + cap->h.object_type = type; + osd_sec_set_caps(&cap->h, OSD_SEC_CAP_V1_ALL_CAPS); + cap->h.object_descriptor_type = descriptor_type; + cap->od.obj_desc.policy_access_tag = 0; + cap->od.obj_desc.allowed_partition_id = cpu_to_be64(obj->partition); + cap->od.obj_desc.allowed_object_id = cpu_to_be64(obj->id); +} +EXPORT_SYMBOL(osd_sec_init_nosec_doall_caps); + +/* FIXME: Extract version from caps pointer. + * Also Pete's target only supports caps from OSDv1 for now + */ +void osd_set_caps(struct osd_cdb *cdb, const void *caps) +{ + bool is_ver1 = true; + /* NOTE: They start at same address */ + memcpy(&cdb->v1.caps, caps, is_ver1 ? OSDv1_CAP_LEN : OSD_CAP_LEN); +} + +bool osd_is_sec_alldata(struct osd_security_parameters *sec_parms __unused) +{ + return false; +} + +void osd_sec_sign_cdb(struct osd_cdb *ocdb __unused, const u8 *cap_key __unused) +{ +} + +void osd_sec_sign_data(void *data_integ __unused, + struct bio *bio __unused, const u8 *cap_key __unused) +{ +} + +/* + * Declared in osd_protocol.h + * 4.12.5 Data-In and Data-Out buffer offsets + * byte offset = mantissa * (2^(exponent+8)) + * Returns the smallest allowed encoded offset that contains given @offset + * The actual encoded offset returned is @offset + *@padding. + */ +osd_cdb_offset __osd_encode_offset( + u64 offset, unsigned *padding, int min_shift, int max_shift) +{ + u64 try_offset = -1, mod, align; + osd_cdb_offset be32_offset; + int shift; + + *padding = 0; + if (!offset) + return 0; + + for (shift = min_shift; shift < max_shift; ++shift) { + try_offset = offset >> shift; + if (try_offset < (1 << OSD_OFFSET_MAX_BITS)) + break; + } + + BUG_ON(shift == max_shift); + + align = 1 << shift; + mod = offset & (align - 1); + if (mod) { + *padding = align - mod; + try_offset += 1; + } + + try_offset |= ((shift - 8) & 0xf) << 28; + be32_offset = cpu_to_be32((u32)try_offset); + + OSD_DEBUG("offset=%llu mantissa=%llu exp=%d encoded=%x pad=%d\n", + _LLU(offset), _LLU(try_offset & 0x0FFFFFFF), shift, + be32_offset, *padding); + return be32_offset; +} diff --git a/drivers/scsi/osd/osd_uld.c b/drivers/scsi/osd/osd_uld.c new file mode 100644 index 00000000000..f8b1a749958 --- /dev/null +++ b/drivers/scsi/osd/osd_uld.c @@ -0,0 +1,487 @@ +/* + * osd_uld.c - OSD Upper Layer Driver + * + * A Linux driver module that registers as a SCSI ULD and probes + * for OSD type SCSI devices. + * It's main function is to export osd devices to in-kernel users like + * osdfs and pNFS-objects-LD. It also provides one ioctl for running + * in Kernel tests. + * + * Copyright (C) 2008 Panasas Inc. All rights reserved. + * + * Authors: + * Boaz Harrosh <bharrosh@panasas.com> + * Benny Halevy <bhalevy@panasas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Panasas company nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/namei.h> +#include <linux/cdev.h> +#include <linux/fs.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/idr.h> +#include <linux/major.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_driver.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_ioctl.h> + +#include <scsi/osd_initiator.h> +#include <scsi/osd_sec.h> + +#include "osd_debug.h" + +#ifndef TYPE_OSD +# define TYPE_OSD 0x11 +#endif + +#ifndef SCSI_OSD_MAJOR +# define SCSI_OSD_MAJOR 260 +#endif +#define SCSI_OSD_MAX_MINOR 64 + +static const char osd_name[] = "osd"; +static const char *osd_version_string = "open-osd 0.1.0"; +const char osd_symlink[] = "scsi_osd"; + +MODULE_AUTHOR("Boaz Harrosh <bharrosh@panasas.com>"); +MODULE_DESCRIPTION("open-osd Upper-Layer-Driver osd.ko"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(SCSI_OSD_MAJOR); +MODULE_ALIAS_SCSI_DEVICE(TYPE_OSD); + +struct osd_uld_device { + int minor; + struct kref kref; + struct cdev cdev; + struct osd_dev od; + struct gendisk *disk; + struct device *class_member; +}; + +static void __uld_get(struct osd_uld_device *oud); +static void __uld_put(struct osd_uld_device *oud); + +/* + * Char Device operations + */ + +static int osd_uld_open(struct inode *inode, struct file *file) +{ + struct osd_uld_device *oud = container_of(inode->i_cdev, + struct osd_uld_device, cdev); + + __uld_get(oud); + /* cache osd_uld_device on file handle */ + file->private_data = oud; + OSD_DEBUG("osd_uld_open %p\n", oud); + return 0; +} + +static int osd_uld_release(struct inode *inode, struct file *file) +{ + struct osd_uld_device *oud = file->private_data; + + OSD_DEBUG("osd_uld_release %p\n", file->private_data); + file->private_data = NULL; + __uld_put(oud); + return 0; +} + +/* FIXME: Only one vector for now */ +unsigned g_test_ioctl; +do_test_fn *g_do_test; + +int osduld_register_test(unsigned ioctl, do_test_fn *do_test) +{ + if (g_test_ioctl) + return -EINVAL; + + g_test_ioctl = ioctl; + g_do_test = do_test; + return 0; +} +EXPORT_SYMBOL(osduld_register_test); + +void osduld_unregister_test(unsigned ioctl) +{ + if (ioctl == g_test_ioctl) { + g_test_ioctl = 0; + g_do_test = NULL; + } +} +EXPORT_SYMBOL(osduld_unregister_test); + +static do_test_fn *_find_ioctl(unsigned cmd) +{ + if (g_test_ioctl == cmd) + return g_do_test; + else + return NULL; +} + +static long osd_uld_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + struct osd_uld_device *oud = file->private_data; + int ret; + do_test_fn *do_test; + + do_test = _find_ioctl(cmd); + if (do_test) + ret = do_test(&oud->od, cmd, arg); + else { + OSD_ERR("Unknown ioctl %d: osd_uld_device=%p\n", cmd, oud); + ret = -ENOIOCTLCMD; + } + return ret; +} + +static const struct file_operations osd_fops = { + .owner = THIS_MODULE, + .open = osd_uld_open, + .release = osd_uld_release, + .unlocked_ioctl = osd_uld_ioctl, +}; + +struct osd_dev *osduld_path_lookup(const char *path) +{ + struct nameidata nd; + struct inode *inode; + struct cdev *cdev; + struct osd_uld_device *uninitialized_var(oud); + int error; + + if (!path || !*path) { + OSD_ERR("Mount with !path || !*path\n"); + return ERR_PTR(-EINVAL); + } + + error = path_lookup(path, LOOKUP_FOLLOW, &nd); + if (error) { + OSD_ERR("path_lookup of %s faild=>%d\n", path, error); + return ERR_PTR(error); + } + + inode = nd.path.dentry->d_inode; + error = -EINVAL; /* Not the right device e.g osd_uld_device */ + if (!S_ISCHR(inode->i_mode)) { + OSD_DEBUG("!S_ISCHR()\n"); + goto out; + } + + cdev = inode->i_cdev; + if (!cdev) { + OSD_ERR("Before mounting an OSD Based filesystem\n"); + OSD_ERR(" user-mode must open+close the %s device\n", path); + OSD_ERR(" Example: bash: echo < %s\n", path); + goto out; + } + + /* The Magic wand. Is it our char-dev */ + /* TODO: Support sg devices */ + if (cdev->owner != THIS_MODULE) { + OSD_ERR("Error mounting %s - is not an OSD device\n", path); + goto out; + } + + oud = container_of(cdev, struct osd_uld_device, cdev); + + __uld_get(oud); + error = 0; + +out: + path_put(&nd.path); + return error ? ERR_PTR(error) : &oud->od; +} +EXPORT_SYMBOL(osduld_path_lookup); + +void osduld_put_device(struct osd_dev *od) +{ + if (od) { + struct osd_uld_device *oud = container_of(od, + struct osd_uld_device, od); + + __uld_put(oud); + } +} +EXPORT_SYMBOL(osduld_put_device); + +/* + * Scsi Device operations + */ + +static int __detect_osd(struct osd_uld_device *oud) +{ + struct scsi_device *scsi_device = oud->od.scsi_device; + char caps[OSD_CAP_LEN]; + int error; + + /* sending a test_unit_ready as first command seems to be needed + * by some targets + */ + OSD_DEBUG("start scsi_test_unit_ready %p %p %p\n", + oud, scsi_device, scsi_device->request_queue); + error = scsi_test_unit_ready(scsi_device, 10*HZ, 5, NULL); + if (error) + OSD_ERR("warning: scsi_test_unit_ready failed\n"); + + osd_sec_init_nosec_doall_caps(caps, &osd_root_object, false, true); + if (osd_auto_detect_ver(&oud->od, caps)) + return -ENODEV; + + return 0; +} + +static struct class *osd_sysfs_class; +static DEFINE_IDA(osd_minor_ida); + +static int osd_probe(struct device *dev) +{ + struct scsi_device *scsi_device = to_scsi_device(dev); + struct gendisk *disk; + struct osd_uld_device *oud; + int minor; + int error; + + if (scsi_device->type != TYPE_OSD) + return -ENODEV; + + do { + if (!ida_pre_get(&osd_minor_ida, GFP_KERNEL)) + return -ENODEV; + + error = ida_get_new(&osd_minor_ida, &minor); + } while (error == -EAGAIN); + + if (error) + return error; + if (minor >= SCSI_OSD_MAX_MINOR) { + error = -EBUSY; + goto err_retract_minor; + } + + error = -ENOMEM; + oud = kzalloc(sizeof(*oud), GFP_KERNEL); + if (NULL == oud) + goto err_retract_minor; + + kref_init(&oud->kref); + dev_set_drvdata(dev, oud); + oud->minor = minor; + + /* allocate a disk and set it up */ + /* FIXME: do we need this since sg has already done that */ + disk = alloc_disk(1); + if (!disk) { + OSD_ERR("alloc_disk failed\n"); + goto err_free_osd; + } + disk->major = SCSI_OSD_MAJOR; + disk->first_minor = oud->minor; + sprintf(disk->disk_name, "osd%d", oud->minor); + oud->disk = disk; + + /* hold one more reference to the scsi_device that will get released + * in __release, in case a logout is happening while fs is mounted + */ + scsi_device_get(scsi_device); + osd_dev_init(&oud->od, scsi_device); + + /* Detect the OSD Version */ + error = __detect_osd(oud); + if (error) { + OSD_ERR("osd detection failed, non-compatible OSD device\n"); + goto err_put_disk; + } + + /* init the char-device for communication with user-mode */ + cdev_init(&oud->cdev, &osd_fops); + oud->cdev.owner = THIS_MODULE; + error = cdev_add(&oud->cdev, + MKDEV(SCSI_OSD_MAJOR, oud->minor), 1); + if (error) { + OSD_ERR("cdev_add failed\n"); + goto err_put_disk; + } + kobject_get(&oud->cdev.kobj); /* 2nd ref see osd_remove() */ + + /* class_member */ + oud->class_member = device_create(osd_sysfs_class, dev, + MKDEV(SCSI_OSD_MAJOR, oud->minor), "%s", disk->disk_name); + if (IS_ERR(oud->class_member)) { + OSD_ERR("class_device_create failed\n"); + error = PTR_ERR(oud->class_member); + goto err_put_cdev; + } + + dev_set_drvdata(oud->class_member, oud); + error = sysfs_create_link(&scsi_device->sdev_gendev.kobj, + &oud->class_member->kobj, osd_symlink); + if (error) + OSD_ERR("warning: unable to make symlink\n"); + + OSD_INFO("osd_probe %s\n", disk->disk_name); + return 0; + +err_put_cdev: + cdev_del(&oud->cdev); +err_put_disk: + scsi_device_put(scsi_device); + put_disk(disk); +err_free_osd: + dev_set_drvdata(dev, NULL); + kfree(oud); +err_retract_minor: + ida_remove(&osd_minor_ida, minor); + return error; +} + +static int osd_remove(struct device *dev) +{ + struct scsi_device *scsi_device = to_scsi_device(dev); + struct osd_uld_device *oud = dev_get_drvdata(dev); + + if (!oud || (oud->od.scsi_device != scsi_device)) { + OSD_ERR("Half cooked osd-device %p,%p || %p!=%p", + dev, oud, oud ? oud->od.scsi_device : NULL, + scsi_device); + } + + sysfs_remove_link(&oud->od.scsi_device->sdev_gendev.kobj, osd_symlink); + + if (oud->class_member) + device_destroy(osd_sysfs_class, + MKDEV(SCSI_OSD_MAJOR, oud->minor)); + + /* We have 2 references to the cdev. One is released here + * and also takes down the /dev/osdX mapping. The second + * Will be released in __remove() after all users have released + * the osd_uld_device. + */ + if (oud->cdev.owner) + cdev_del(&oud->cdev); + + __uld_put(oud); + return 0; +} + +static void __remove(struct kref *kref) +{ + struct osd_uld_device *oud = container_of(kref, + struct osd_uld_device, kref); + struct scsi_device *scsi_device = oud->od.scsi_device; + + /* now let delete the char_dev */ + kobject_put(&oud->cdev.kobj); + + osd_dev_fini(&oud->od); + scsi_device_put(scsi_device); + + OSD_INFO("osd_remove %s\n", + oud->disk ? oud->disk->disk_name : NULL); + + if (oud->disk) + put_disk(oud->disk); + + ida_remove(&osd_minor_ida, oud->minor); + kfree(oud); +} + +static void __uld_get(struct osd_uld_device *oud) +{ + kref_get(&oud->kref); +} + +static void __uld_put(struct osd_uld_device *oud) +{ + kref_put(&oud->kref, __remove); +} + +/* + * Global driver and scsi registration + */ + +static struct scsi_driver osd_driver = { + .owner = THIS_MODULE, + .gendrv = { + .name = osd_name, + .probe = osd_probe, + .remove = osd_remove, + } +}; + +static int __init osd_uld_init(void) +{ + int err; + + osd_sysfs_class = class_create(THIS_MODULE, osd_symlink); + if (IS_ERR(osd_sysfs_class)) { + OSD_ERR("Unable to register sysfs class => %ld\n", + PTR_ERR(osd_sysfs_class)); + return PTR_ERR(osd_sysfs_class); + } + + err = register_chrdev_region(MKDEV(SCSI_OSD_MAJOR, 0), + SCSI_OSD_MAX_MINOR, osd_name); + if (err) { + OSD_ERR("Unable to register major %d for osd ULD => %d\n", + SCSI_OSD_MAJOR, err); + goto err_out; + } + + err = scsi_register_driver(&osd_driver.gendrv); + if (err) { + OSD_ERR("scsi_register_driver failed => %d\n", err); + goto err_out_chrdev; + } + + OSD_INFO("LOADED %s\n", osd_version_string); + return 0; + +err_out_chrdev: + unregister_chrdev_region(MKDEV(SCSI_OSD_MAJOR, 0), SCSI_OSD_MAX_MINOR); +err_out: + class_destroy(osd_sysfs_class); + return err; +} + +static void __exit osd_uld_exit(void) +{ + scsi_unregister_driver(&osd_driver.gendrv); + unregister_chrdev_region(MKDEV(SCSI_OSD_MAJOR, 0), SCSI_OSD_MAX_MINOR); + class_destroy(osd_sysfs_class); + OSD_INFO("UNLOADED %s\n", osd_version_string); +} + +module_init(osd_uld_init); +module_exit(osd_uld_exit); diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c index 0ea78d9a37d..acb835837ee 100644 --- a/drivers/scsi/osst.c +++ b/drivers/scsi/osst.c @@ -280,8 +280,8 @@ static int osst_chk_result(struct osst_tape * STp, struct osst_request * SRpnt) static int notyetprinted = 1; printk(KERN_WARNING - "%s:W: Warning %x (sugg. bt 0x%x, driver bt 0x%x, host bt 0x%x).\n", - name, result, suggestion(result), driver_byte(result) & DRIVER_MASK, + "%s:W: Warning %x (driver bt 0x%x, host bt 0x%x).\n", + name, result, driver_byte(result), host_byte(result)); if (notyetprinted) { notyetprinted = 0; @@ -317,18 +317,25 @@ static int osst_chk_result(struct osst_tape * STp, struct osst_request * SRpnt) /* Wakeup from interrupt */ -static void osst_sleep_done(void *data, char *sense, int result, int resid) +static void osst_end_async(struct request *req, int update) { - struct osst_request *SRpnt = data; + struct osst_request *SRpnt = req->end_io_data; struct osst_tape *STp = SRpnt->stp; + struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data; - memcpy(SRpnt->sense, sense, SCSI_SENSE_BUFFERSIZE); - STp->buffer->cmdstat.midlevel_result = SRpnt->result = result; + STp->buffer->cmdstat.midlevel_result = SRpnt->result = req->errors; #if DEBUG STp->write_pending = 0; #endif if (SRpnt->waiting) complete(SRpnt->waiting); + + if (SRpnt->bio) { + kfree(mdata->pages); + blk_rq_unmap_user(SRpnt->bio); + } + + __blk_put_request(req->q, req); } /* osst_request memory management */ @@ -342,6 +349,74 @@ static void osst_release_request(struct osst_request *streq) kfree(streq); } +static int osst_execute(struct osst_request *SRpnt, const unsigned char *cmd, + int cmd_len, int data_direction, void *buffer, unsigned bufflen, + int use_sg, int timeout, int retries) +{ + struct request *req; + struct page **pages = NULL; + struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data; + + int err = 0; + int write = (data_direction == DMA_TO_DEVICE); + + req = blk_get_request(SRpnt->stp->device->request_queue, write, GFP_KERNEL); + if (!req) + return DRIVER_ERROR << 24; + + req->cmd_type = REQ_TYPE_BLOCK_PC; + req->cmd_flags |= REQ_QUIET; + + SRpnt->bio = NULL; + + if (use_sg) { + struct scatterlist *sg, *sgl = (struct scatterlist *)buffer; + int i; + + pages = kzalloc(use_sg * sizeof(struct page *), GFP_KERNEL); + if (!pages) + goto free_req; + + for_each_sg(sgl, sg, use_sg, i) + pages[i] = sg_page(sg); + + mdata->null_mapped = 1; + + mdata->page_order = get_order(sgl[0].length); + mdata->nr_entries = + DIV_ROUND_UP(bufflen, PAGE_SIZE << mdata->page_order); + mdata->offset = 0; + + err = blk_rq_map_user(req->q, req, mdata, NULL, bufflen, GFP_KERNEL); + if (err) { + kfree(pages); + goto free_req; + } + SRpnt->bio = req->bio; + mdata->pages = pages; + + } else if (bufflen) { + err = blk_rq_map_kern(req->q, req, buffer, bufflen, GFP_KERNEL); + if (err) + goto free_req; + } + + req->cmd_len = cmd_len; + memset(req->cmd, 0, BLK_MAX_CDB); /* ATAPI hates garbage after CDB */ + memcpy(req->cmd, cmd, req->cmd_len); + req->sense = SRpnt->sense; + req->sense_len = 0; + req->timeout = timeout; + req->retries = retries; + req->end_io_data = SRpnt; + + blk_execute_rq_nowait(req->q, NULL, req, 1, osst_end_async); + return 0; +free_req: + blk_put_request(req); + return DRIVER_ERROR << 24; +} + /* Do the scsi command. Waits until command performed if do_wait is true. Otherwise osst_write_behind_check() is used to check that the command has finished. */ @@ -403,8 +478,8 @@ static struct osst_request * osst_do_scsi(struct osst_request *SRpnt, struct oss STp->buffer->cmdstat.have_sense = 0; STp->buffer->syscall_result = 0; - if (scsi_execute_async(STp->device, cmd, COMMAND_SIZE(cmd[0]), direction, bp, bytes, - use_sg, timeout, retries, SRpnt, osst_sleep_done, GFP_KERNEL)) + if (osst_execute(SRpnt, cmd, COMMAND_SIZE(cmd[0]), direction, bp, bytes, + use_sg, timeout, retries)) /* could not allocate the buffer or request was too large */ (STp->buffer)->syscall_result = (-EBUSY); else if (do_wait) { @@ -5286,11 +5361,6 @@ static int enlarge_buffer(struct osst_buffer *STbuffer, int need_dma) struct page *page = alloc_pages(priority, (OS_FRAME_SIZE - got <= PAGE_SIZE) ? 0 : order); STbuffer->sg[segs].offset = 0; if (page == NULL) { - if (OS_FRAME_SIZE - got <= (max_segs - segs) * b_size / 2 && order) { - b_size /= 2; /* Large enough for the rest of the buffers */ - order--; - continue; - } printk(KERN_WARNING "osst :W: Failed to enlarge buffer to %d bytes.\n", OS_FRAME_SIZE); #if DEBUG diff --git a/drivers/scsi/osst.h b/drivers/scsi/osst.h index 5aa22740b5d..11d26c57f3f 100644 --- a/drivers/scsi/osst.h +++ b/drivers/scsi/osst.h @@ -520,6 +520,7 @@ struct osst_buffer { int syscall_result; struct osst_request *last_SRpnt; struct st_cmdstatus cmdstat; + struct rq_map_data map_data; unsigned char *b_data; os_aux_t *aux; /* onstream AUX structure at end of each block */ unsigned short use_sg; /* zero or number of s/g segments for this adapter */ @@ -634,6 +635,7 @@ struct osst_request { int result; struct osst_tape *stp; struct completion *waiting; + struct bio *bio; }; /* Values of write_type */ diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index cbcd3f681b6..a2ef03243a2 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -967,6 +967,110 @@ int scsi_track_queue_full(struct scsi_device *sdev, int depth) EXPORT_SYMBOL(scsi_track_queue_full); /** + * scsi_vpd_inquiry - Request a device provide us with a VPD page + * @sdev: The device to ask + * @buffer: Where to put the result + * @page: Which Vital Product Data to return + * @len: The length of the buffer + * + * This is an internal helper function. You probably want to use + * scsi_get_vpd_page instead. + * + * Returns 0 on success or a negative error number. + */ +static int scsi_vpd_inquiry(struct scsi_device *sdev, unsigned char *buffer, + u8 page, unsigned len) +{ + int result; + unsigned char cmd[16]; + + cmd[0] = INQUIRY; + cmd[1] = 1; /* EVPD */ + cmd[2] = page; + cmd[3] = len >> 8; + cmd[4] = len & 0xff; + cmd[5] = 0; /* Control byte */ + + /* + * I'm not convinced we need to try quite this hard to get VPD, but + * all the existing users tried this hard. + */ + result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer, + len + 4, NULL, 30 * HZ, 3, NULL); + if (result) + return result; + + /* Sanity check that we got the page back that we asked for */ + if (buffer[1] != page) + return -EIO; + + return 0; +} + +/** + * scsi_get_vpd_page - Get Vital Product Data from a SCSI device + * @sdev: The device to ask + * @page: Which Vital Product Data to return + * + * SCSI devices may optionally supply Vital Product Data. Each 'page' + * of VPD is defined in the appropriate SCSI document (eg SPC, SBC). + * If the device supports this VPD page, this routine returns a pointer + * to a buffer containing the data from that page. The caller is + * responsible for calling kfree() on this pointer when it is no longer + * needed. If we cannot retrieve the VPD page this routine returns %NULL. + */ +unsigned char *scsi_get_vpd_page(struct scsi_device *sdev, u8 page) +{ + int i, result; + unsigned int len; + unsigned char *buf = kmalloc(259, GFP_KERNEL); + + if (!buf) + return NULL; + + /* Ask for all the pages supported by this device */ + result = scsi_vpd_inquiry(sdev, buf, 0, 255); + if (result) + goto fail; + + /* If the user actually wanted this page, we can skip the rest */ + if (page == 0) + return buf; + + for (i = 0; i < buf[3]; i++) + if (buf[i + 4] == page) + goto found; + /* The device claims it doesn't support the requested page */ + goto fail; + + found: + result = scsi_vpd_inquiry(sdev, buf, page, 255); + if (result) + goto fail; + + /* + * Some pages are longer than 255 bytes. The actual length of + * the page is returned in the header. + */ + len = (buf[2] << 8) | buf[3]; + if (len <= 255) + return buf; + + kfree(buf); + buf = kmalloc(len + 4, GFP_KERNEL); + result = scsi_vpd_inquiry(sdev, buf, page, len); + if (result) + goto fail; + + return buf; + + fail: + kfree(buf); + return NULL; +} +EXPORT_SYMBOL_GPL(scsi_get_vpd_page); + +/** * scsi_device_get - get an additional reference to a scsi_device * @sdev: device to get a reference to * diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 6eebd0bbe8a..213123b0486 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -40,6 +40,9 @@ #include <linux/moduleparam.h> #include <linux/scatterlist.h> #include <linux/blkdev.h> +#include <linux/crc-t10dif.h> + +#include <net/checksum.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> @@ -48,8 +51,7 @@ #include <scsi/scsicam.h> #include <scsi/scsi_eh.h> -#include <linux/stat.h> - +#include "sd.h" #include "scsi_logging.h" #define SCSI_DEBUG_VERSION "1.81" @@ -95,6 +97,10 @@ static const char * scsi_debug_version_date = "20070104"; #define DEF_FAKE_RW 0 #define DEF_VPD_USE_HOSTNO 1 #define DEF_SECTOR_SIZE 512 +#define DEF_DIX 0 +#define DEF_DIF 0 +#define DEF_GUARD 0 +#define DEF_ATO 1 /* bit mask values for scsi_debug_opts */ #define SCSI_DEBUG_OPT_NOISE 1 @@ -102,6 +108,8 @@ static const char * scsi_debug_version_date = "20070104"; #define SCSI_DEBUG_OPT_TIMEOUT 4 #define SCSI_DEBUG_OPT_RECOVERED_ERR 8 #define SCSI_DEBUG_OPT_TRANSPORT_ERR 16 +#define SCSI_DEBUG_OPT_DIF_ERR 32 +#define SCSI_DEBUG_OPT_DIX_ERR 64 /* When "every_nth" > 0 then modulo "every_nth" commands: * - a no response is simulated if SCSI_DEBUG_OPT_TIMEOUT is set * - a RECOVERED_ERROR is simulated on successful read and write @@ -144,6 +152,10 @@ static int scsi_debug_virtual_gb = DEF_VIRTUAL_GB; static int scsi_debug_fake_rw = DEF_FAKE_RW; static int scsi_debug_vpd_use_hostno = DEF_VPD_USE_HOSTNO; static int scsi_debug_sector_size = DEF_SECTOR_SIZE; +static int scsi_debug_dix = DEF_DIX; +static int scsi_debug_dif = DEF_DIF; +static int scsi_debug_guard = DEF_GUARD; +static int scsi_debug_ato = DEF_ATO; static int scsi_debug_cmnd_count = 0; @@ -204,11 +216,15 @@ struct sdebug_queued_cmd { static struct sdebug_queued_cmd queued_arr[SCSI_DEBUG_CANQUEUE]; static unsigned char * fake_storep; /* ramdisk storage */ +static unsigned char *dif_storep; /* protection info */ static int num_aborts = 0; static int num_dev_resets = 0; static int num_bus_resets = 0; static int num_host_resets = 0; +static int dix_writes; +static int dix_reads; +static int dif_errors; static DEFINE_SPINLOCK(queued_arr_lock); static DEFINE_RWLOCK(atomic_rw); @@ -217,6 +233,11 @@ static char sdebug_proc_name[] = "scsi_debug"; static struct bus_type pseudo_lld_bus; +static inline sector_t dif_offset(sector_t sector) +{ + return sector << 3; +} + static struct device_driver sdebug_driverfs_driver = { .name = sdebug_proc_name, .bus = &pseudo_lld_bus, @@ -225,6 +246,9 @@ static struct device_driver sdebug_driverfs_driver = { static const int check_condition_result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; +static const int illegal_condition_result = + (DRIVER_SENSE << 24) | (DID_ABORT << 16) | SAM_STAT_CHECK_CONDITION; + static unsigned char ctrl_m_pg[] = {0xa, 10, 2, 0, 0, 0, 0, 0, 0, 0, 0x2, 0x4b}; static unsigned char iec_m_pg[] = {0x1c, 0xa, 0x08, 0, 0, 0, 0, 0, @@ -726,7 +750,12 @@ static int resp_inquiry(struct scsi_cmnd * scp, int target, } else if (0x86 == cmd[2]) { /* extended inquiry */ arr[1] = cmd[2]; /*sanity */ arr[3] = 0x3c; /* number of following entries */ - arr[4] = 0x0; /* no protection stuff */ + if (scsi_debug_dif == SD_DIF_TYPE3_PROTECTION) + arr[4] = 0x4; /* SPT: GRD_CHK:1 */ + else if (scsi_debug_dif) + arr[4] = 0x5; /* SPT: GRD_CHK:1, REF_CHK:1 */ + else + arr[4] = 0x0; /* no protection stuff */ arr[5] = 0x7; /* head of q, ordered + simple q's */ } else if (0x87 == cmd[2]) { /* mode page policy */ arr[1] = cmd[2]; /*sanity */ @@ -767,6 +796,7 @@ static int resp_inquiry(struct scsi_cmnd * scp, int target, arr[2] = scsi_debug_scsi_level; arr[3] = 2; /* response_data_format==2 */ arr[4] = SDEBUG_LONG_INQ_SZ - 5; + arr[5] = scsi_debug_dif ? 1 : 0; /* PROTECT bit */ if (0 == scsi_debug_vpd_use_hostno) arr[5] = 0x10; /* claim: implicit TGPS */ arr[6] = 0x10; /* claim: MultiP */ @@ -915,6 +945,12 @@ static int resp_readcap16(struct scsi_cmnd * scp, arr[9] = (scsi_debug_sector_size >> 16) & 0xff; arr[10] = (scsi_debug_sector_size >> 8) & 0xff; arr[11] = scsi_debug_sector_size & 0xff; + + if (scsi_debug_dif) { + arr[12] = (scsi_debug_dif - 1) << 1; /* P_TYPE */ + arr[12] |= 1; /* PROT_EN */ + } + return fill_from_dev_buffer(scp, arr, min(alloc_len, SDEBUG_READCAP16_ARR_SZ)); } @@ -1066,6 +1102,10 @@ static int resp_ctrl_m_pg(unsigned char * p, int pcontrol, int target) ctrl_m_pg[2] |= 0x4; else ctrl_m_pg[2] &= ~0x4; + + if (scsi_debug_ato) + ctrl_m_pg[5] |= 0x80; /* ATO=1 */ + memcpy(p, ctrl_m_pg, sizeof(ctrl_m_pg)); if (1 == pcontrol) memcpy(p + 2, ch_ctrl_m_pg, sizeof(ch_ctrl_m_pg)); @@ -1536,6 +1576,87 @@ static int do_device_access(struct scsi_cmnd *scmd, return ret; } +static int prot_verify_read(struct scsi_cmnd *SCpnt, sector_t start_sec, + unsigned int sectors) +{ + unsigned int i, resid; + struct scatterlist *psgl; + struct sd_dif_tuple *sdt; + sector_t sector; + sector_t tmp_sec = start_sec; + void *paddr; + + start_sec = do_div(tmp_sec, sdebug_store_sectors); + + sdt = (struct sd_dif_tuple *)(dif_storep + dif_offset(start_sec)); + + for (i = 0 ; i < sectors ; i++) { + u16 csum; + + if (sdt[i].app_tag == 0xffff) + continue; + + sector = start_sec + i; + + switch (scsi_debug_guard) { + case 1: + csum = ip_compute_csum(fake_storep + + sector * scsi_debug_sector_size, + scsi_debug_sector_size); + break; + case 0: + csum = crc_t10dif(fake_storep + + sector * scsi_debug_sector_size, + scsi_debug_sector_size); + csum = cpu_to_be16(csum); + break; + default: + BUG(); + } + + if (sdt[i].guard_tag != csum) { + printk(KERN_ERR "%s: GUARD check failed on sector %lu" \ + " rcvd 0x%04x, data 0x%04x\n", __func__, + (unsigned long)sector, + be16_to_cpu(sdt[i].guard_tag), + be16_to_cpu(csum)); + dif_errors++; + return 0x01; + } + + if (scsi_debug_dif != SD_DIF_TYPE3_PROTECTION && + be32_to_cpu(sdt[i].ref_tag) != (sector & 0xffffffff)) { + printk(KERN_ERR "%s: REF check failed on sector %lu\n", + __func__, (unsigned long)sector); + dif_errors++; + return 0x03; + } + } + + resid = sectors * 8; /* Bytes of protection data to copy into sgl */ + sector = start_sec; + + scsi_for_each_prot_sg(SCpnt, psgl, scsi_prot_sg_count(SCpnt), i) { + int len = min(psgl->length, resid); + + paddr = kmap_atomic(sg_page(psgl), KM_IRQ0) + psgl->offset; + memcpy(paddr, dif_storep + dif_offset(sector), len); + + sector += len >> 3; + if (sector >= sdebug_store_sectors) { + /* Force wrap */ + tmp_sec = sector; + sector = do_div(tmp_sec, sdebug_store_sectors); + } + resid -= len; + kunmap_atomic(paddr, KM_IRQ0); + } + + dix_reads++; + + return 0; +} + static int resp_read(struct scsi_cmnd *SCpnt, unsigned long long lba, unsigned int num, struct sdebug_dev_info *devip) { @@ -1563,12 +1684,162 @@ static int resp_read(struct scsi_cmnd *SCpnt, unsigned long long lba, } return check_condition_result; } + + /* DIX + T10 DIF */ + if (scsi_debug_dix && scsi_prot_sg_count(SCpnt)) { + int prot_ret = prot_verify_read(SCpnt, lba, num); + + if (prot_ret) { + mk_sense_buffer(devip, ABORTED_COMMAND, 0x10, prot_ret); + return illegal_condition_result; + } + } + read_lock_irqsave(&atomic_rw, iflags); ret = do_device_access(SCpnt, devip, lba, num, 0); read_unlock_irqrestore(&atomic_rw, iflags); return ret; } +void dump_sector(unsigned char *buf, int len) +{ + int i, j; + + printk(KERN_ERR ">>> Sector Dump <<<\n"); + + for (i = 0 ; i < len ; i += 16) { + printk(KERN_ERR "%04d: ", i); + + for (j = 0 ; j < 16 ; j++) { + unsigned char c = buf[i+j]; + if (c >= 0x20 && c < 0x7e) + printk(" %c ", buf[i+j]); + else + printk("%02x ", buf[i+j]); + } + + printk("\n"); + } +} + +static int prot_verify_write(struct scsi_cmnd *SCpnt, sector_t start_sec, + unsigned int sectors) +{ + int i, j, ret; + struct sd_dif_tuple *sdt; + struct scatterlist *dsgl = scsi_sglist(SCpnt); + struct scatterlist *psgl = scsi_prot_sglist(SCpnt); + void *daddr, *paddr; + sector_t tmp_sec = start_sec; + sector_t sector; + int ppage_offset; + unsigned short csum; + + sector = do_div(tmp_sec, sdebug_store_sectors); + + if (((SCpnt->cmnd[1] >> 5) & 7) != 1) { + printk(KERN_WARNING "scsi_debug: WRPROTECT != 1\n"); + return 0; + } + + BUG_ON(scsi_sg_count(SCpnt) == 0); + BUG_ON(scsi_prot_sg_count(SCpnt) == 0); + + paddr = kmap_atomic(sg_page(psgl), KM_IRQ1) + psgl->offset; + ppage_offset = 0; + + /* For each data page */ + scsi_for_each_sg(SCpnt, dsgl, scsi_sg_count(SCpnt), i) { + daddr = kmap_atomic(sg_page(dsgl), KM_IRQ0) + dsgl->offset; + + /* For each sector-sized chunk in data page */ + for (j = 0 ; j < dsgl->length ; j += scsi_debug_sector_size) { + + /* If we're at the end of the current + * protection page advance to the next one + */ + if (ppage_offset >= psgl->length) { + kunmap_atomic(paddr, KM_IRQ1); + psgl = sg_next(psgl); + BUG_ON(psgl == NULL); + paddr = kmap_atomic(sg_page(psgl), KM_IRQ1) + + psgl->offset; + ppage_offset = 0; + } + + sdt = paddr + ppage_offset; + + switch (scsi_debug_guard) { + case 1: + csum = ip_compute_csum(daddr, + scsi_debug_sector_size); + break; + case 0: + csum = cpu_to_be16(crc_t10dif(daddr, + scsi_debug_sector_size)); + break; + default: + BUG(); + ret = 0; + goto out; + } + + if (sdt->guard_tag != csum) { + printk(KERN_ERR + "%s: GUARD check failed on sector %lu " \ + "rcvd 0x%04x, calculated 0x%04x\n", + __func__, (unsigned long)sector, + be16_to_cpu(sdt->guard_tag), + be16_to_cpu(csum)); + ret = 0x01; + dump_sector(daddr, scsi_debug_sector_size); + goto out; + } + + if (scsi_debug_dif != SD_DIF_TYPE3_PROTECTION && + be32_to_cpu(sdt->ref_tag) + != (start_sec & 0xffffffff)) { + printk(KERN_ERR + "%s: REF check failed on sector %lu\n", + __func__, (unsigned long)sector); + ret = 0x03; + dump_sector(daddr, scsi_debug_sector_size); + goto out; + } + + /* Would be great to copy this in bigger + * chunks. However, for the sake of + * correctness we need to verify each sector + * before writing it to "stable" storage + */ + memcpy(dif_storep + dif_offset(sector), sdt, 8); + + sector++; + + if (sector == sdebug_store_sectors) + sector = 0; /* Force wrap */ + + start_sec++; + daddr += scsi_debug_sector_size; + ppage_offset += sizeof(struct sd_dif_tuple); + } + + kunmap_atomic(daddr, KM_IRQ0); + } + + kunmap_atomic(paddr, KM_IRQ1); + + dix_writes++; + + return 0; + +out: + dif_errors++; + kunmap_atomic(daddr, KM_IRQ0); + kunmap_atomic(paddr, KM_IRQ1); + return ret; +} + static int resp_write(struct scsi_cmnd *SCpnt, unsigned long long lba, unsigned int num, struct sdebug_dev_info *devip) { @@ -1579,6 +1850,16 @@ static int resp_write(struct scsi_cmnd *SCpnt, unsigned long long lba, if (ret) return ret; + /* DIX + T10 DIF */ + if (scsi_debug_dix && scsi_prot_sg_count(SCpnt)) { + int prot_ret = prot_verify_write(SCpnt, lba, num); + + if (prot_ret) { + mk_sense_buffer(devip, ILLEGAL_REQUEST, 0x10, prot_ret); + return illegal_condition_result; + } + } + write_lock_irqsave(&atomic_rw, iflags); ret = do_device_access(SCpnt, devip, lba, num, 1); write_unlock_irqrestore(&atomic_rw, iflags); @@ -2095,6 +2376,10 @@ module_param_named(virtual_gb, scsi_debug_virtual_gb, int, S_IRUGO | S_IWUSR); module_param_named(vpd_use_hostno, scsi_debug_vpd_use_hostno, int, S_IRUGO | S_IWUSR); module_param_named(sector_size, scsi_debug_sector_size, int, S_IRUGO); +module_param_named(dix, scsi_debug_dix, int, S_IRUGO); +module_param_named(dif, scsi_debug_dif, int, S_IRUGO); +module_param_named(guard, scsi_debug_guard, int, S_IRUGO); +module_param_named(ato, scsi_debug_ato, int, S_IRUGO); MODULE_AUTHOR("Eric Youngdale + Douglas Gilbert"); MODULE_DESCRIPTION("SCSI debug adapter driver"); @@ -2117,7 +2402,10 @@ MODULE_PARM_DESC(scsi_level, "SCSI level to simulate(def=5[SPC-3])"); MODULE_PARM_DESC(virtual_gb, "virtual gigabyte size (def=0 -> use dev_size_mb)"); MODULE_PARM_DESC(vpd_use_hostno, "0 -> dev ids ignore hostno (def=1 -> unique dev ids)"); MODULE_PARM_DESC(sector_size, "hardware sector size in bytes (def=512)"); - +MODULE_PARM_DESC(dix, "data integrity extensions mask (def=0)"); +MODULE_PARM_DESC(dif, "data integrity field type: 0-3 (def=0)"); +MODULE_PARM_DESC(guard, "protection checksum: 0=crc, 1=ip (def=0)"); +MODULE_PARM_DESC(ato, "application tag ownership: 0=disk 1=host (def=1)"); static char sdebug_info[256]; @@ -2164,14 +2452,14 @@ static int scsi_debug_proc_info(struct Scsi_Host *host, char *buffer, char **sta "delay=%d, max_luns=%d, scsi_level=%d\n" "sector_size=%d bytes, cylinders=%d, heads=%d, sectors=%d\n" "number of aborts=%d, device_reset=%d, bus_resets=%d, " - "host_resets=%d\n", + "host_resets=%d\ndix_reads=%d dix_writes=%d dif_errors=%d\n", SCSI_DEBUG_VERSION, scsi_debug_version_date, scsi_debug_num_tgts, scsi_debug_dev_size_mb, scsi_debug_opts, scsi_debug_every_nth, scsi_debug_cmnd_count, scsi_debug_delay, scsi_debug_max_luns, scsi_debug_scsi_level, scsi_debug_sector_size, sdebug_cylinders_per, sdebug_heads, sdebug_sectors_per, num_aborts, num_dev_resets, num_bus_resets, - num_host_resets); + num_host_resets, dix_reads, dix_writes, dif_errors); if (pos < offset) { len = 0; begin = pos; @@ -2452,6 +2740,31 @@ static ssize_t sdebug_sector_size_show(struct device_driver * ddp, char * buf) } DRIVER_ATTR(sector_size, S_IRUGO, sdebug_sector_size_show, NULL); +static ssize_t sdebug_dix_show(struct device_driver *ddp, char *buf) +{ + return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_dix); +} +DRIVER_ATTR(dix, S_IRUGO, sdebug_dix_show, NULL); + +static ssize_t sdebug_dif_show(struct device_driver *ddp, char *buf) +{ + return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_dif); +} +DRIVER_ATTR(dif, S_IRUGO, sdebug_dif_show, NULL); + +static ssize_t sdebug_guard_show(struct device_driver *ddp, char *buf) +{ + return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_guard); +} +DRIVER_ATTR(guard, S_IRUGO, sdebug_guard_show, NULL); + +static ssize_t sdebug_ato_show(struct device_driver *ddp, char *buf) +{ + return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_ato); +} +DRIVER_ATTR(ato, S_IRUGO, sdebug_ato_show, NULL); + + /* Note: The following function creates attribute files in the /sys/bus/pseudo/drivers/scsi_debug directory. The advantage of these files (over those found in the /sys/module/scsi_debug/parameters @@ -2478,11 +2791,19 @@ static int do_create_driverfs_files(void) ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_virtual_gb); ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_vpd_use_hostno); ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_sector_size); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_dix); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_dif); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_guard); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_ato); return ret; } static void do_remove_driverfs_files(void) { + driver_remove_file(&sdebug_driverfs_driver, &driver_attr_ato); + driver_remove_file(&sdebug_driverfs_driver, &driver_attr_guard); + driver_remove_file(&sdebug_driverfs_driver, &driver_attr_dif); + driver_remove_file(&sdebug_driverfs_driver, &driver_attr_dix); driver_remove_file(&sdebug_driverfs_driver, &driver_attr_sector_size); driver_remove_file(&sdebug_driverfs_driver, &driver_attr_vpd_use_hostno); driver_remove_file(&sdebug_driverfs_driver, &driver_attr_virtual_gb); @@ -2526,11 +2847,33 @@ static int __init scsi_debug_init(void) case 4096: break; default: - printk(KERN_ERR "scsi_debug_init: invalid sector_size %u\n", + printk(KERN_ERR "scsi_debug_init: invalid sector_size %d\n", scsi_debug_sector_size); return -EINVAL; } + switch (scsi_debug_dif) { + + case SD_DIF_TYPE0_PROTECTION: + case SD_DIF_TYPE1_PROTECTION: + case SD_DIF_TYPE3_PROTECTION: + break; + + default: + printk(KERN_ERR "scsi_debug_init: dif must be 0, 1 or 3\n"); + return -EINVAL; + } + + if (scsi_debug_guard > 1) { + printk(KERN_ERR "scsi_debug_init: guard must be 0 or 1\n"); + return -EINVAL; + } + + if (scsi_debug_ato > 1) { + printk(KERN_ERR "scsi_debug_init: ato must be 0 or 1\n"); + return -EINVAL; + } + if (scsi_debug_dev_size_mb < 1) scsi_debug_dev_size_mb = 1; /* force minimum 1 MB ramdisk */ sz = (unsigned long)scsi_debug_dev_size_mb * 1048576; @@ -2563,6 +2906,24 @@ static int __init scsi_debug_init(void) if (scsi_debug_num_parts > 0) sdebug_build_parts(fake_storep, sz); + if (scsi_debug_dif) { + int dif_size; + + dif_size = sdebug_store_sectors * sizeof(struct sd_dif_tuple); + dif_storep = vmalloc(dif_size); + + printk(KERN_ERR "scsi_debug_init: dif_storep %u bytes @ %p\n", + dif_size, dif_storep); + + if (dif_storep == NULL) { + printk(KERN_ERR "scsi_debug_init: out of mem. (DIX)\n"); + ret = -ENOMEM; + goto free_vm; + } + + memset(dif_storep, 0xff, dif_size); + } + ret = device_register(&pseudo_primary); if (ret < 0) { printk(KERN_WARNING "scsi_debug: device_register error: %d\n", @@ -2615,6 +2976,8 @@ bus_unreg: dev_unreg: device_unregister(&pseudo_primary); free_vm: + if (dif_storep) + vfree(dif_storep); vfree(fake_storep); return ret; @@ -2632,6 +2995,9 @@ static void __exit scsi_debug_exit(void) bus_unregister(&pseudo_lld_bus); device_unregister(&pseudo_primary); + if (dif_storep) + vfree(dif_storep); + vfree(fake_storep); } @@ -2732,6 +3098,8 @@ int scsi_debug_queuecommand(struct scsi_cmnd *SCpnt, done_funct_t done) struct sdebug_dev_info *devip = NULL; int inj_recovered = 0; int inj_transport = 0; + int inj_dif = 0; + int inj_dix = 0; int delay_override = 0; scsi_set_resid(SCpnt, 0); @@ -2769,6 +3137,10 @@ int scsi_debug_queuecommand(struct scsi_cmnd *SCpnt, done_funct_t done) inj_recovered = 1; /* to reads and writes below */ else if (SCSI_DEBUG_OPT_TRANSPORT_ERR & scsi_debug_opts) inj_transport = 1; /* to reads and writes below */ + else if (SCSI_DEBUG_OPT_DIF_ERR & scsi_debug_opts) + inj_dif = 1; /* to reads and writes below */ + else if (SCSI_DEBUG_OPT_DIX_ERR & scsi_debug_opts) + inj_dix = 1; /* to reads and writes below */ } if (devip->wlun) { @@ -2870,6 +3242,12 @@ int scsi_debug_queuecommand(struct scsi_cmnd *SCpnt, done_funct_t done) mk_sense_buffer(devip, ABORTED_COMMAND, TRANSPORT_PROBLEM, ACK_NAK_TO); errsts = check_condition_result; + } else if (inj_dif && (0 == errsts)) { + mk_sense_buffer(devip, ABORTED_COMMAND, 0x10, 1); + errsts = illegal_condition_result; + } else if (inj_dix && (0 == errsts)) { + mk_sense_buffer(devip, ILLEGAL_REQUEST, 0x10, 1); + errsts = illegal_condition_result; } break; case REPORT_LUNS: /* mandatory, ignore unit attention */ @@ -2894,6 +3272,12 @@ int scsi_debug_queuecommand(struct scsi_cmnd *SCpnt, done_funct_t done) mk_sense_buffer(devip, RECOVERED_ERROR, THRESHOLD_EXCEEDED, 0); errsts = check_condition_result; + } else if (inj_dif && (0 == errsts)) { + mk_sense_buffer(devip, ABORTED_COMMAND, 0x10, 1); + errsts = illegal_condition_result; + } else if (inj_dix && (0 == errsts)) { + mk_sense_buffer(devip, ILLEGAL_REQUEST, 0x10, 1); + errsts = illegal_condition_result; } break; case MODE_SENSE: @@ -2982,6 +3366,7 @@ static int sdebug_driver_probe(struct device * dev) int error = 0; struct sdebug_host_info *sdbg_host; struct Scsi_Host *hpnt; + int host_prot; sdbg_host = to_sdebug_host(dev); @@ -3000,6 +3385,50 @@ static int sdebug_driver_probe(struct device * dev) hpnt->max_id = scsi_debug_num_tgts; hpnt->max_lun = SAM2_WLUN_REPORT_LUNS; /* = scsi_debug_max_luns; */ + host_prot = 0; + + switch (scsi_debug_dif) { + + case SD_DIF_TYPE1_PROTECTION: + host_prot = SHOST_DIF_TYPE1_PROTECTION; + if (scsi_debug_dix) + host_prot |= SHOST_DIX_TYPE1_PROTECTION; + break; + + case SD_DIF_TYPE2_PROTECTION: + host_prot = SHOST_DIF_TYPE2_PROTECTION; + if (scsi_debug_dix) + host_prot |= SHOST_DIX_TYPE2_PROTECTION; + break; + + case SD_DIF_TYPE3_PROTECTION: + host_prot = SHOST_DIF_TYPE3_PROTECTION; + if (scsi_debug_dix) + host_prot |= SHOST_DIX_TYPE3_PROTECTION; + break; + + default: + if (scsi_debug_dix) + host_prot |= SHOST_DIX_TYPE0_PROTECTION; + break; + } + + scsi_host_set_prot(hpnt, host_prot); + + printk(KERN_INFO "scsi_debug: host protection%s%s%s%s%s%s%s\n", + (host_prot & SHOST_DIF_TYPE1_PROTECTION) ? " DIF1" : "", + (host_prot & SHOST_DIF_TYPE2_PROTECTION) ? " DIF2" : "", + (host_prot & SHOST_DIF_TYPE3_PROTECTION) ? " DIF3" : "", + (host_prot & SHOST_DIX_TYPE0_PROTECTION) ? " DIX0" : "", + (host_prot & SHOST_DIX_TYPE1_PROTECTION) ? " DIX1" : "", + (host_prot & SHOST_DIX_TYPE2_PROTECTION) ? " DIX2" : "", + (host_prot & SHOST_DIX_TYPE3_PROTECTION) ? " DIX3" : ""); + + if (scsi_debug_guard == 1) + scsi_host_set_guard(hpnt, SHOST_DIX_GUARD_IP); + else + scsi_host_set_guard(hpnt, SHOST_DIX_GUARD_CRC); + error = scsi_add_host(hpnt, &sdbg_host->dev); if (error) { printk(KERN_ERR "%s: scsi_add_host failed\n", __func__); diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index ad6a1370761..0c2c73be197 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1441,6 +1441,11 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) } } +static void eh_lock_door_done(struct request *req, int uptodate) +{ + __blk_put_request(req->q, req); +} + /** * scsi_eh_lock_door - Prevent medium removal for the specified device * @sdev: SCSI device to prevent medium removal @@ -1463,19 +1468,28 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) */ static void scsi_eh_lock_door(struct scsi_device *sdev) { - unsigned char cmnd[MAX_COMMAND_SIZE]; + struct request *req; - cmnd[0] = ALLOW_MEDIUM_REMOVAL; - cmnd[1] = 0; - cmnd[2] = 0; - cmnd[3] = 0; - cmnd[4] = SCSI_REMOVAL_PREVENT; - cmnd[5] = 0; + req = blk_get_request(sdev->request_queue, READ, GFP_KERNEL); + if (!req) + return; - scsi_execute_async(sdev, cmnd, 6, DMA_NONE, NULL, 0, 0, 10 * HZ, - 5, NULL, NULL, GFP_KERNEL); -} + req->cmd[0] = ALLOW_MEDIUM_REMOVAL; + req->cmd[1] = 0; + req->cmd[2] = 0; + req->cmd[3] = 0; + req->cmd[4] = SCSI_REMOVAL_PREVENT; + req->cmd[5] = 0; + req->cmd_len = COMMAND_SIZE(req->cmd[0]); + + req->cmd_type = REQ_TYPE_BLOCK_PC; + req->cmd_flags |= REQ_QUIET; + req->timeout = 10 * HZ; + req->retries = 5; + + blk_execute_rq_nowait(req->q, NULL, req, 1, eh_lock_door_done); +} /** * scsi_restart_operations - restart io operations to the specified host. diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index b82ffd90632..4b13e36d3aa 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -277,196 +277,6 @@ int scsi_execute_req(struct scsi_device *sdev, const unsigned char *cmd, } EXPORT_SYMBOL(scsi_execute_req); -struct scsi_io_context { - void *data; - void (*done)(void *data, char *sense, int result, int resid); - char sense[SCSI_SENSE_BUFFERSIZE]; -}; - -static struct kmem_cache *scsi_io_context_cache; - -static void scsi_end_async(struct request *req, int uptodate) -{ - struct scsi_io_context *sioc = req->end_io_data; - - if (sioc->done) - sioc->done(sioc->data, sioc->sense, req->errors, req->data_len); - - kmem_cache_free(scsi_io_context_cache, sioc); - __blk_put_request(req->q, req); -} - -static int scsi_merge_bio(struct request *rq, struct bio *bio) -{ - struct request_queue *q = rq->q; - - bio->bi_flags &= ~(1 << BIO_SEG_VALID); - if (rq_data_dir(rq) == WRITE) - bio->bi_rw |= (1 << BIO_RW); - blk_queue_bounce(q, &bio); - - return blk_rq_append_bio(q, rq, bio); -} - -static void scsi_bi_endio(struct bio *bio, int error) -{ - bio_put(bio); -} - -/** - * scsi_req_map_sg - map a scatterlist into a request - * @rq: request to fill - * @sgl: scatterlist - * @nsegs: number of elements - * @bufflen: len of buffer - * @gfp: memory allocation flags - * - * scsi_req_map_sg maps a scatterlist into a request so that the - * request can be sent to the block layer. We do not trust the scatterlist - * sent to use, as some ULDs use that struct to only organize the pages. - */ -static int scsi_req_map_sg(struct request *rq, struct scatterlist *sgl, - int nsegs, unsigned bufflen, gfp_t gfp) -{ - struct request_queue *q = rq->q; - int nr_pages = (bufflen + sgl[0].offset + PAGE_SIZE - 1) >> PAGE_SHIFT; - unsigned int data_len = bufflen, len, bytes, off; - struct scatterlist *sg; - struct page *page; - struct bio *bio = NULL; - int i, err, nr_vecs = 0; - - for_each_sg(sgl, sg, nsegs, i) { - page = sg_page(sg); - off = sg->offset; - len = sg->length; - - while (len > 0 && data_len > 0) { - /* - * sg sends a scatterlist that is larger than - * the data_len it wants transferred for certain - * IO sizes - */ - bytes = min_t(unsigned int, len, PAGE_SIZE - off); - bytes = min(bytes, data_len); - - if (!bio) { - nr_vecs = min_t(int, BIO_MAX_PAGES, nr_pages); - nr_pages -= nr_vecs; - - bio = bio_alloc(gfp, nr_vecs); - if (!bio) { - err = -ENOMEM; - goto free_bios; - } - bio->bi_end_io = scsi_bi_endio; - } - - if (bio_add_pc_page(q, bio, page, bytes, off) != - bytes) { - bio_put(bio); - err = -EINVAL; - goto free_bios; - } - - if (bio->bi_vcnt >= nr_vecs) { - err = scsi_merge_bio(rq, bio); - if (err) { - bio_endio(bio, 0); - goto free_bios; - } - bio = NULL; - } - - page++; - len -= bytes; - data_len -=bytes; - off = 0; - } - } - - rq->buffer = rq->data = NULL; - rq->data_len = bufflen; - return 0; - -free_bios: - while ((bio = rq->bio) != NULL) { - rq->bio = bio->bi_next; - /* - * call endio instead of bio_put incase it was bounced - */ - bio_endio(bio, 0); - } - - return err; -} - -/** - * scsi_execute_async - insert request - * @sdev: scsi device - * @cmd: scsi command - * @cmd_len: length of scsi cdb - * @data_direction: DMA_TO_DEVICE, DMA_FROM_DEVICE, or DMA_NONE - * @buffer: data buffer (this can be a kernel buffer or scatterlist) - * @bufflen: len of buffer - * @use_sg: if buffer is a scatterlist this is the number of elements - * @timeout: request timeout in seconds - * @retries: number of times to retry request - * @privdata: data passed to done() - * @done: callback function when done - * @gfp: memory allocation flags - */ -int scsi_execute_async(struct scsi_device *sdev, const unsigned char *cmd, - int cmd_len, int data_direction, void *buffer, unsigned bufflen, - int use_sg, int timeout, int retries, void *privdata, - void (*done)(void *, char *, int, int), gfp_t gfp) -{ - struct request *req; - struct scsi_io_context *sioc; - int err = 0; - int write = (data_direction == DMA_TO_DEVICE); - - sioc = kmem_cache_zalloc(scsi_io_context_cache, gfp); - if (!sioc) - return DRIVER_ERROR << 24; - - req = blk_get_request(sdev->request_queue, write, gfp); - if (!req) - goto free_sense; - req->cmd_type = REQ_TYPE_BLOCK_PC; - req->cmd_flags |= REQ_QUIET; - - if (use_sg) - err = scsi_req_map_sg(req, buffer, use_sg, bufflen, gfp); - else if (bufflen) - err = blk_rq_map_kern(req->q, req, buffer, bufflen, gfp); - - if (err) - goto free_req; - - req->cmd_len = cmd_len; - memset(req->cmd, 0, BLK_MAX_CDB); /* ATAPI hates garbage after CDB */ - memcpy(req->cmd, cmd, req->cmd_len); - req->sense = sioc->sense; - req->sense_len = 0; - req->timeout = timeout; - req->retries = retries; - req->end_io_data = sioc; - - sioc->data = privdata; - sioc->done = done; - - blk_execute_rq_nowait(req->q, NULL, req, 1, scsi_end_async); - return 0; - -free_req: - blk_put_request(req); -free_sense: - kmem_cache_free(scsi_io_context_cache, sioc); - return DRIVER_ERROR << 24; -} -EXPORT_SYMBOL_GPL(scsi_execute_async); - /* * Function: scsi_init_cmd_errh() * @@ -1920,20 +1730,12 @@ int __init scsi_init_queue(void) { int i; - scsi_io_context_cache = kmem_cache_create("scsi_io_context", - sizeof(struct scsi_io_context), - 0, 0, NULL); - if (!scsi_io_context_cache) { - printk(KERN_ERR "SCSI: can't init scsi io context cache\n"); - return -ENOMEM; - } - scsi_sdb_cache = kmem_cache_create("scsi_data_buffer", sizeof(struct scsi_data_buffer), 0, 0, NULL); if (!scsi_sdb_cache) { printk(KERN_ERR "SCSI: can't init scsi sdb cache\n"); - goto cleanup_io_context; + return -ENOMEM; } for (i = 0; i < SG_MEMPOOL_NR; i++) { @@ -1968,8 +1770,6 @@ cleanup_sdb: kmem_cache_destroy(sgp->slab); } kmem_cache_destroy(scsi_sdb_cache); -cleanup_io_context: - kmem_cache_destroy(scsi_io_context_cache); return -ENOMEM; } @@ -1978,7 +1778,6 @@ void scsi_exit_queue(void) { int i; - kmem_cache_destroy(scsi_io_context_cache); kmem_cache_destroy(scsi_sdb_cache); for (i = 0; i < SG_MEMPOOL_NR; i++) { diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 8f4de20c9de..a14d245a66b 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -797,6 +797,7 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, case TYPE_ENCLOSURE: case TYPE_COMM: case TYPE_RAID: + case TYPE_OSD: sdev->writeable = 1; break; case TYPE_ROM: diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index da63802cbf9..fa4711d1274 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -1043,7 +1043,6 @@ EXPORT_SYMBOL(scsi_register_interface); /** * scsi_sysfs_add_host - add scsi host to subsystem * @shost: scsi host struct to add to subsystem - * @dev: parent struct device pointer **/ int scsi_sysfs_add_host(struct Scsi_Host *shost) { diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 3ee4eb40abc..a152f89ae51 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -95,7 +95,7 @@ static struct { { FC_PORTTYPE_NPORT, "NPort (fabric via point-to-point)" }, { FC_PORTTYPE_NLPORT, "NLPort (fabric via loop)" }, { FC_PORTTYPE_LPORT, "LPort (private loop)" }, - { FC_PORTTYPE_PTP, "Point-To-Point (direct nport connection" }, + { FC_PORTTYPE_PTP, "Point-To-Point (direct nport connection)" }, { FC_PORTTYPE_NPIV, "NPIV VPORT" }, }; fc_enum_name_search(port_type, fc_port_type, fc_port_type_names) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 2adfab8c11c..09479545529 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -246,30 +246,13 @@ static int iscsi_setup_host(struct transport_container *tc, struct device *dev, memset(ihost, 0, sizeof(*ihost)); atomic_set(&ihost->nr_scans, 0); mutex_init(&ihost->mutex); - - snprintf(ihost->scan_workq_name, sizeof(ihost->scan_workq_name), - "iscsi_scan_%d", shost->host_no); - ihost->scan_workq = create_singlethread_workqueue( - ihost->scan_workq_name); - if (!ihost->scan_workq) - return -ENOMEM; - return 0; -} - -static int iscsi_remove_host(struct transport_container *tc, struct device *dev, - struct device *cdev) -{ - struct Scsi_Host *shost = dev_to_shost(dev); - struct iscsi_cls_host *ihost = shost->shost_data; - - destroy_workqueue(ihost->scan_workq); return 0; } static DECLARE_TRANSPORT_CLASS(iscsi_host_class, "iscsi_host", iscsi_setup_host, - iscsi_remove_host, + NULL, NULL); static DECLARE_TRANSPORT_CLASS(iscsi_session_class, @@ -568,7 +551,7 @@ static void __iscsi_unblock_session(struct work_struct *work) * scanning from userspace). */ if (shost->hostt->scan_finished) { - if (queue_work(ihost->scan_workq, &session->scan_work)) + if (scsi_queue_work(shost, &session->scan_work)) atomic_inc(&ihost->nr_scans); } } @@ -636,14 +619,6 @@ static void __iscsi_unbind_session(struct work_struct *work) iscsi_session_event(session, ISCSI_KEVENT_UNBIND_SESSION); } -static int iscsi_unbind_session(struct iscsi_cls_session *session) -{ - struct Scsi_Host *shost = iscsi_session_to_shost(session); - struct iscsi_cls_host *ihost = shost->shost_data; - - return queue_work(ihost->scan_workq, &session->unbind_work); -} - struct iscsi_cls_session * iscsi_alloc_session(struct Scsi_Host *shost, struct iscsi_transport *transport, int dd_size) @@ -796,7 +771,6 @@ static int iscsi_iter_destroy_conn_fn(struct device *dev, void *data) void iscsi_remove_session(struct iscsi_cls_session *session) { struct Scsi_Host *shost = iscsi_session_to_shost(session); - struct iscsi_cls_host *ihost = shost->shost_data; unsigned long flags; int err; @@ -821,7 +795,7 @@ void iscsi_remove_session(struct iscsi_cls_session *session) scsi_target_unblock(&session->dev); /* flush running scans then delete devices */ - flush_workqueue(ihost->scan_workq); + scsi_flush_work(shost); __iscsi_unbind_session(&session->unbind_work); /* hw iscsi may not have removed all connections from session */ @@ -1215,14 +1189,15 @@ iscsi_if_create_session(struct iscsi_internal *priv, struct iscsi_endpoint *ep, { struct iscsi_transport *transport = priv->iscsi_transport; struct iscsi_cls_session *session; - uint32_t host_no; + struct Scsi_Host *shost; session = transport->create_session(ep, cmds_max, queue_depth, - initial_cmdsn, &host_no); + initial_cmdsn); if (!session) return -ENOMEM; - ev->r.c_session_ret.host_no = host_no; + shost = iscsi_session_to_shost(session); + ev->r.c_session_ret.host_no = shost->host_no; ev->r.c_session_ret.sid = session->sid; return 0; } @@ -1439,7 +1414,8 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh) case ISCSI_UEVENT_UNBIND_SESSION: session = iscsi_session_lookup(ev->u.d_session.sid); if (session) - iscsi_unbind_session(session); + scsi_queue_work(iscsi_session_to_shost(session), + &session->unbind_work); else err = -EINVAL; break; @@ -1801,8 +1777,7 @@ iscsi_register_transport(struct iscsi_transport *tt) priv->daemon_pid = -1; priv->iscsi_transport = tt; priv->t.user_scan = iscsi_user_scan; - if (!(tt->caps & CAP_DATA_PATH_OFFLOAD)) - priv->t.create_work_queue = 1; + priv->t.create_work_queue = 1; priv->dev.class = &iscsi_transport_class; dev_set_name(&priv->dev, "%s", tt->name); diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 4970ae4a62d..aeab5d9dff2 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1273,42 +1273,126 @@ disable: sdkp->capacity = 0; } -/* - * read disk capacity - */ -static void -sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer) +static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp, + struct scsi_sense_hdr *sshdr, int sense_valid, + int the_result) +{ + sd_print_result(sdkp, the_result); + if (driver_byte(the_result) & DRIVER_SENSE) + sd_print_sense_hdr(sdkp, sshdr); + else + sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n"); + + /* + * Set dirty bit for removable devices if not ready - + * sometimes drives will not report this properly. + */ + if (sdp->removable && + sense_valid && sshdr->sense_key == NOT_READY) + sdp->changed = 1; + + /* + * We used to set media_present to 0 here to indicate no media + * in the drive, but some drives fail read capacity even with + * media present, so we can't do that. + */ + sdkp->capacity = 0; /* unknown mapped to zero - as usual */ +} + +#define RC16_LEN 32 +#if RC16_LEN > SD_BUF_SIZE +#error RC16_LEN must not be more than SD_BUF_SIZE +#endif + +static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp, + unsigned char *buffer) { unsigned char cmd[16]; - int the_result, retries; - int sector_size = 0; - /* Force READ CAPACITY(16) when PROTECT=1 */ - int longrc = scsi_device_protection(sdkp->device) ? 1 : 0; struct scsi_sense_hdr sshdr; int sense_valid = 0; - struct scsi_device *sdp = sdkp->device; + int the_result; + int retries = 3; + unsigned long long lba; + unsigned sector_size; -repeat: - retries = 3; do { - if (longrc) { - memset((void *) cmd, 0, 16); - cmd[0] = SERVICE_ACTION_IN; - cmd[1] = SAI_READ_CAPACITY_16; - cmd[13] = 13; - memset((void *) buffer, 0, 13); - } else { - cmd[0] = READ_CAPACITY; - memset((void *) &cmd[1], 0, 9); - memset((void *) buffer, 0, 8); + memset(cmd, 0, 16); + cmd[0] = SERVICE_ACTION_IN; + cmd[1] = SAI_READ_CAPACITY_16; + cmd[13] = RC16_LEN; + memset(buffer, 0, RC16_LEN); + + the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE, + buffer, RC16_LEN, &sshdr, + SD_TIMEOUT, SD_MAX_RETRIES, NULL); + + if (media_not_present(sdkp, &sshdr)) + return -ENODEV; + + if (the_result) { + sense_valid = scsi_sense_valid(&sshdr); + if (sense_valid && + sshdr.sense_key == ILLEGAL_REQUEST && + (sshdr.asc == 0x20 || sshdr.asc == 0x24) && + sshdr.ascq == 0x00) + /* Invalid Command Operation Code or + * Invalid Field in CDB, just retry + * silently with RC10 */ + return -EINVAL; } - + retries--; + + } while (the_result && retries); + + if (the_result) { + sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY(16) failed\n"); + read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result); + return -EINVAL; + } + + sector_size = (buffer[8] << 24) | (buffer[9] << 16) | + (buffer[10] << 8) | buffer[11]; + lba = (((u64)buffer[0] << 56) | ((u64)buffer[1] << 48) | + ((u64)buffer[2] << 40) | ((u64)buffer[3] << 32) | + ((u64)buffer[4] << 24) | ((u64)buffer[5] << 16) | + ((u64)buffer[6] << 8) | (u64)buffer[7]); + + sd_read_protection_type(sdkp, buffer); + + if ((sizeof(sdkp->capacity) == 4) && (lba >= 0xffffffffULL)) { + sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a " + "kernel compiled with support for large block " + "devices.\n"); + sdkp->capacity = 0; + return -EOVERFLOW; + } + + sdkp->capacity = lba + 1; + return sector_size; +} + +static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp, + unsigned char *buffer) +{ + unsigned char cmd[16]; + struct scsi_sense_hdr sshdr; + int sense_valid = 0; + int the_result; + int retries = 3; + sector_t lba; + unsigned sector_size; + + do { + cmd[0] = READ_CAPACITY; + memset(&cmd[1], 0, 9); + memset(buffer, 0, 8); + the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE, - buffer, longrc ? 13 : 8, &sshdr, - SD_TIMEOUT, SD_MAX_RETRIES, NULL); + buffer, 8, &sshdr, + SD_TIMEOUT, SD_MAX_RETRIES, NULL); if (media_not_present(sdkp, &sshdr)) - return; + return -ENODEV; if (the_result) sense_valid = scsi_sense_valid(&sshdr); @@ -1316,85 +1400,96 @@ repeat: } while (the_result && retries); - if (the_result && !longrc) { + if (the_result) { sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY failed\n"); - sd_print_result(sdkp, the_result); - if (driver_byte(the_result) & DRIVER_SENSE) - sd_print_sense_hdr(sdkp, &sshdr); - else - sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n"); + read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result); + return -EINVAL; + } - /* Set dirty bit for removable devices if not ready - - * sometimes drives will not report this properly. */ - if (sdp->removable && - sense_valid && sshdr.sense_key == NOT_READY) - sdp->changed = 1; + sector_size = (buffer[4] << 24) | (buffer[5] << 16) | + (buffer[6] << 8) | buffer[7]; + lba = (buffer[0] << 24) | (buffer[1] << 16) | + (buffer[2] << 8) | buffer[3]; - /* Either no media are present but the drive didn't tell us, - or they are present but the read capacity command fails */ - /* sdkp->media_present = 0; -- not always correct */ - sdkp->capacity = 0; /* unknown mapped to zero - as usual */ + if ((sizeof(sdkp->capacity) == 4) && (lba == 0xffffffff)) { + sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a " + "kernel compiled with support for large block " + "devices.\n"); + sdkp->capacity = 0; + return -EOVERFLOW; + } - return; - } else if (the_result && longrc) { - /* READ CAPACITY(16) has been failed */ - sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY(16) failed\n"); - sd_print_result(sdkp, the_result); - sd_printk(KERN_NOTICE, sdkp, "Use 0xffffffff as device size\n"); + sdkp->capacity = lba + 1; + return sector_size; +} - sdkp->capacity = 1 + (sector_t) 0xffffffff; - goto got_data; - } - - if (!longrc) { - sector_size = (buffer[4] << 24) | - (buffer[5] << 16) | (buffer[6] << 8) | buffer[7]; - if (buffer[0] == 0xff && buffer[1] == 0xff && - buffer[2] == 0xff && buffer[3] == 0xff) { - if(sizeof(sdkp->capacity) > 4) { - sd_printk(KERN_NOTICE, sdkp, "Very big device. " - "Trying to use READ CAPACITY(16).\n"); - longrc = 1; - goto repeat; - } - sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use " - "a kernel compiled with support for large " - "block devices.\n"); - sdkp->capacity = 0; +static int sd_try_rc16_first(struct scsi_device *sdp) +{ + if (sdp->scsi_level > SCSI_SPC_2) + return 1; + if (scsi_device_protection(sdp)) + return 1; + return 0; +} + +/* + * read disk capacity + */ +static void +sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer) +{ + int sector_size; + struct scsi_device *sdp = sdkp->device; + sector_t old_capacity = sdkp->capacity; + + if (sd_try_rc16_first(sdp)) { + sector_size = read_capacity_16(sdkp, sdp, buffer); + if (sector_size == -EOVERFLOW) goto got_data; - } - sdkp->capacity = 1 + (((sector_t)buffer[0] << 24) | - (buffer[1] << 16) | - (buffer[2] << 8) | - buffer[3]); + if (sector_size == -ENODEV) + return; + if (sector_size < 0) + sector_size = read_capacity_10(sdkp, sdp, buffer); + if (sector_size < 0) + return; } else { - sdkp->capacity = 1 + (((u64)buffer[0] << 56) | - ((u64)buffer[1] << 48) | - ((u64)buffer[2] << 40) | - ((u64)buffer[3] << 32) | - ((sector_t)buffer[4] << 24) | - ((sector_t)buffer[5] << 16) | - ((sector_t)buffer[6] << 8) | - (sector_t)buffer[7]); - - sector_size = (buffer[8] << 24) | - (buffer[9] << 16) | (buffer[10] << 8) | buffer[11]; - - sd_read_protection_type(sdkp, buffer); - } - - /* Some devices return the total number of sectors, not the - * highest sector number. Make the necessary adjustment. */ - if (sdp->fix_capacity) { - --sdkp->capacity; + sector_size = read_capacity_10(sdkp, sdp, buffer); + if (sector_size == -EOVERFLOW) + goto got_data; + if (sector_size < 0) + return; + if ((sizeof(sdkp->capacity) > 4) && + (sdkp->capacity > 0xffffffffULL)) { + int old_sector_size = sector_size; + sd_printk(KERN_NOTICE, sdkp, "Very big device. " + "Trying to use READ CAPACITY(16).\n"); + sector_size = read_capacity_16(sdkp, sdp, buffer); + if (sector_size < 0) { + sd_printk(KERN_NOTICE, sdkp, + "Using 0xffffffff as device size\n"); + sdkp->capacity = 1 + (sector_t) 0xffffffff; + sector_size = old_sector_size; + goto got_data; + } + } + } - /* Some devices have version which report the correct sizes - * and others which do not. We guess size according to a heuristic - * and err on the side of lowering the capacity. */ - } else { - if (sdp->guess_capacity) - if (sdkp->capacity & 0x01) /* odd sizes are odd */ - --sdkp->capacity; + /* Some devices are known to return the total number of blocks, + * not the highest block number. Some devices have versions + * which do this and others which do not. Some devices we might + * suspect of doing this but we don't know for certain. + * + * If we know the reported capacity is wrong, decrement it. If + * we can only guess, then assume the number of blocks is even + * (usually true but not always) and err on the side of lowering + * the capacity. + */ + if (sdp->fix_capacity || + (sdp->guess_capacity && (sdkp->capacity & 0x01))) { + sd_printk(KERN_INFO, sdkp, "Adjusting the sector count " + "from its reported value: %llu\n", + (unsigned long long) sdkp->capacity); + --sdkp->capacity; } got_data: @@ -1437,10 +1532,11 @@ got_data: string_get_size(sz, STRING_UNITS_10, cap_str_10, sizeof(cap_str_10)); - sd_printk(KERN_NOTICE, sdkp, - "%llu %d-byte hardware sectors: (%s/%s)\n", - (unsigned long long)sdkp->capacity, - sector_size, cap_str_10, cap_str_2); + if (sdkp->first_scan || old_capacity != sdkp->capacity) + sd_printk(KERN_NOTICE, sdkp, + "%llu %d-byte hardware sectors: (%s/%s)\n", + (unsigned long long)sdkp->capacity, + sector_size, cap_str_10, cap_str_2); } /* Rescale capacity to 512-byte units */ @@ -1477,6 +1573,7 @@ sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer) int res; struct scsi_device *sdp = sdkp->device; struct scsi_mode_data data; + int old_wp = sdkp->write_prot; set_disk_ro(sdkp->disk, 0); if (sdp->skip_ms_page_3f) { @@ -1517,11 +1614,13 @@ sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer) } else { sdkp->write_prot = ((data.device_specific & 0x80) != 0); set_disk_ro(sdkp->disk, sdkp->write_prot); - sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n", - sdkp->write_prot ? "on" : "off"); - sd_printk(KERN_DEBUG, sdkp, - "Mode Sense: %02x %02x %02x %02x\n", - buffer[0], buffer[1], buffer[2], buffer[3]); + if (sdkp->first_scan || old_wp != sdkp->write_prot) { + sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n", + sdkp->write_prot ? "on" : "off"); + sd_printk(KERN_DEBUG, sdkp, + "Mode Sense: %02x %02x %02x %02x\n", + buffer[0], buffer[1], buffer[2], buffer[3]); + } } } @@ -1539,6 +1638,9 @@ sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer) int modepage; struct scsi_mode_data data; struct scsi_sense_hdr sshdr; + int old_wce = sdkp->WCE; + int old_rcd = sdkp->RCD; + int old_dpofua = sdkp->DPOFUA; if (sdp->skip_ms_page_8) goto defaults; @@ -1610,12 +1712,14 @@ sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer) sdkp->DPOFUA = 0; } - sd_printk(KERN_NOTICE, sdkp, - "Write cache: %s, read cache: %s, %s\n", - sdkp->WCE ? "enabled" : "disabled", - sdkp->RCD ? "disabled" : "enabled", - sdkp->DPOFUA ? "supports DPO and FUA" - : "doesn't support DPO or FUA"); + if (sdkp->first_scan || old_wce != sdkp->WCE || + old_rcd != sdkp->RCD || old_dpofua != sdkp->DPOFUA) + sd_printk(KERN_NOTICE, sdkp, + "Write cache: %s, read cache: %s, %s\n", + sdkp->WCE ? "enabled" : "disabled", + sdkp->RCD ? "disabled" : "enabled", + sdkp->DPOFUA ? "supports DPO and FUA" + : "doesn't support DPO or FUA"); return; } @@ -1711,15 +1815,6 @@ static int sd_revalidate_disk(struct gendisk *disk) goto out; } - /* defaults, until the device tells us otherwise */ - sdp->sector_size = 512; - sdkp->capacity = 0; - sdkp->media_present = 1; - sdkp->write_prot = 0; - sdkp->WCE = 0; - sdkp->RCD = 0; - sdkp->ATO = 0; - sd_spinup_disk(sdkp); /* @@ -1733,6 +1828,8 @@ static int sd_revalidate_disk(struct gendisk *disk) sd_read_app_tag_own(sdkp, buffer); } + sdkp->first_scan = 0; + /* * We now have all cache related info, determine how we deal * with ordered requests. Note that as the current SCSI @@ -1843,6 +1940,16 @@ static void sd_probe_async(void *data, async_cookie_t cookie) gd->private_data = &sdkp->driver; gd->queue = sdkp->device->request_queue; + /* defaults, until the device tells us otherwise */ + sdp->sector_size = 512; + sdkp->capacity = 0; + sdkp->media_present = 1; + sdkp->write_prot = 0; + sdkp->WCE = 0; + sdkp->RCD = 0; + sdkp->ATO = 0; + sdkp->first_scan = 1; + sd_revalidate_disk(gd); blk_queue_prep_rq(sdp->request_queue, sd_prep_fn); diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index 75638e7d3f6..708778cf5f0 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -53,6 +53,7 @@ struct scsi_disk { unsigned WCE : 1; /* state of disk WCE bit */ unsigned RCD : 1; /* state of disk RCD bit, unused */ unsigned DPOFUA : 1; /* state of disk DPOFUA bit */ + unsigned first_scan : 1; }; #define to_scsi_disk(obj) container_of(obj,struct scsi_disk,dev) diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index e946e05db7f..c9146d751cb 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -345,44 +345,21 @@ static int ses_enclosure_find_by_addr(struct enclosure_device *edev, return 0; } -#define VPD_INQUIRY_SIZE 36 - static void ses_match_to_enclosure(struct enclosure_device *edev, struct scsi_device *sdev) { - unsigned char *buf = kmalloc(VPD_INQUIRY_SIZE, GFP_KERNEL); + unsigned char *buf; unsigned char *desc; - u16 vpd_len; + unsigned int vpd_len; struct efd efd = { .addr = 0, }; - unsigned char cmd[] = { - INQUIRY, - 1, - 0x83, - VPD_INQUIRY_SIZE >> 8, - VPD_INQUIRY_SIZE & 0xff, - 0 - }; + buf = scsi_get_vpd_page(sdev, 0x83); if (!buf) return; - if (scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, - VPD_INQUIRY_SIZE, NULL, SES_TIMEOUT, SES_RETRIES, - NULL)) - goto free; - - vpd_len = (buf[2] << 8) + buf[3]; - kfree(buf); - buf = kmalloc(vpd_len, GFP_KERNEL); - if (!buf) - return; - cmd[3] = vpd_len >> 8; - cmd[4] = vpd_len & 0xff; - if (scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, - vpd_len, NULL, SES_TIMEOUT, SES_RETRIES, NULL)) - goto free; + vpd_len = ((buf[2] << 8) | buf[3]) + 4; desc = buf + 4; while (desc < buf + vpd_len) { @@ -393,7 +370,7 @@ static void ses_match_to_enclosure(struct enclosure_device *edev, u8 type = desc[1] & 0x0f; u8 len = desc[3]; - if (piv && code_set == 1 && assoc == 1 && code_set == 1 + if (piv && code_set == 1 && assoc == 1 && proto == SCSI_PROTOCOL_SAS && type == 3 && len == 8) efd.addr = (u64)desc[4] << 56 | (u64)desc[5] << 48 | diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index b4ef2f84ea3..ffc87851f2e 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -98,7 +98,6 @@ static int scatter_elem_sz = SG_SCATTER_SZ; static int scatter_elem_sz_prev = SG_SCATTER_SZ; #define SG_SECTOR_SZ 512 -#define SG_SECTOR_MSK (SG_SECTOR_SZ - 1) static int sg_add(struct device *, struct class_interface *); static void sg_remove(struct device *, struct class_interface *); @@ -137,10 +136,11 @@ typedef struct sg_request { /* SG_MAX_QUEUE requests outstanding per file */ volatile char done; /* 0->before bh, 1->before read, 2->read */ struct request *rq; struct bio *bio; + struct execute_work ew; } Sg_request; typedef struct sg_fd { /* holds the state of a file descriptor */ - struct sg_fd *nextfp; /* NULL when last opened fd on this device */ + struct list_head sfd_siblings; struct sg_device *parentdp; /* owning device */ wait_queue_head_t read_wait; /* queue read until command done */ rwlock_t rq_list_lock; /* protect access to list in req_arr */ @@ -158,6 +158,8 @@ typedef struct sg_fd { /* holds the state of a file descriptor */ char next_cmd_len; /* 0 -> automatic (def), >0 -> use on next write() */ char keep_orphan; /* 0 -> drop orphan (def), 1 -> keep for read() */ char mmap_called; /* 0 -> mmap() never called on this fd */ + struct kref f_ref; + struct execute_work ew; } Sg_fd; typedef struct sg_device { /* holds the state of each scsi generic device */ @@ -165,27 +167,25 @@ typedef struct sg_device { /* holds the state of each scsi generic device */ wait_queue_head_t o_excl_wait; /* queue open() when O_EXCL in use */ int sg_tablesize; /* adapter's max scatter-gather table size */ u32 index; /* device index number */ - Sg_fd *headfp; /* first open fd belonging to this device */ + struct list_head sfds; volatile char detached; /* 0->attached, 1->detached pending removal */ volatile char exclude; /* opened for exclusive access */ char sgdebug; /* 0->off, 1->sense, 9->dump dev, 10-> all devs */ struct gendisk *disk; struct cdev * cdev; /* char_dev [sysfs: /sys/cdev/major/sg<n>] */ + struct kref d_ref; } Sg_device; -static int sg_fasync(int fd, struct file *filp, int mode); /* tasklet or soft irq callback */ static void sg_rq_end_io(struct request *rq, int uptodate); static int sg_start_req(Sg_request *srp, unsigned char *cmd); static void sg_finish_rem_req(Sg_request * srp); static int sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size); -static int sg_build_sgat(Sg_scatter_hold * schp, const Sg_fd * sfp, - int tablesize); static ssize_t sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp); static ssize_t sg_new_write(Sg_fd *sfp, struct file *file, const char __user *buf, size_t count, int blocking, - int read_only, Sg_request **o_srp); + int read_only, int sg_io_owned, Sg_request **o_srp); static int sg_common_write(Sg_fd * sfp, Sg_request * srp, unsigned char *cmnd, int timeout, int blocking); static int sg_read_oxfer(Sg_request * srp, char __user *outp, int num_read_xfer); @@ -194,16 +194,13 @@ static void sg_build_reserve(Sg_fd * sfp, int req_size); static void sg_link_reserve(Sg_fd * sfp, Sg_request * srp, int size); static void sg_unlink_reserve(Sg_fd * sfp, Sg_request * srp); static Sg_fd *sg_add_sfp(Sg_device * sdp, int dev); -static int sg_remove_sfp(Sg_device * sdp, Sg_fd * sfp); -static void __sg_remove_sfp(Sg_device * sdp, Sg_fd * sfp); +static void sg_remove_sfp(struct kref *); static Sg_request *sg_get_rq_mark(Sg_fd * sfp, int pack_id); static Sg_request *sg_add_request(Sg_fd * sfp); static int sg_remove_request(Sg_fd * sfp, Sg_request * srp); static int sg_res_in_use(Sg_fd * sfp); static Sg_device *sg_get_dev(int dev); -#ifdef CONFIG_SCSI_PROC_FS -static int sg_last_dev(void); -#endif +static void sg_put_dev(Sg_device *sdp); #define SZ_SG_HEADER sizeof(struct sg_header) #define SZ_SG_IO_HDR sizeof(sg_io_hdr_t) @@ -237,22 +234,17 @@ sg_open(struct inode *inode, struct file *filp) nonseekable_open(inode, filp); SCSI_LOG_TIMEOUT(3, printk("sg_open: dev=%d, flags=0x%x\n", dev, flags)); sdp = sg_get_dev(dev); - if ((!sdp) || (!sdp->device)) { - unlock_kernel(); - return -ENXIO; - } - if (sdp->detached) { - unlock_kernel(); - return -ENODEV; + if (IS_ERR(sdp)) { + retval = PTR_ERR(sdp); + sdp = NULL; + goto sg_put; } /* This driver's module count bumped by fops_get in <linux/fs.h> */ /* Prevent the device driver from vanishing while we sleep */ retval = scsi_device_get(sdp->device); - if (retval) { - unlock_kernel(); - return retval; - } + if (retval) + goto sg_put; if (!((flags & O_NONBLOCK) || scsi_block_when_processing_errors(sdp->device))) { @@ -266,13 +258,13 @@ sg_open(struct inode *inode, struct file *filp) retval = -EPERM; /* Can't lock it with read only access */ goto error_out; } - if (sdp->headfp && (flags & O_NONBLOCK)) { + if (!list_empty(&sdp->sfds) && (flags & O_NONBLOCK)) { retval = -EBUSY; goto error_out; } res = 0; __wait_event_interruptible(sdp->o_excl_wait, - ((sdp->headfp || sdp->exclude) ? 0 : (sdp->exclude = 1)), res); + ((!list_empty(&sdp->sfds) || sdp->exclude) ? 0 : (sdp->exclude = 1)), res); if (res) { retval = res; /* -ERESTARTSYS because signal hit process */ goto error_out; @@ -294,7 +286,7 @@ sg_open(struct inode *inode, struct file *filp) retval = -ENODEV; goto error_out; } - if (!sdp->headfp) { /* no existing opens on this device */ + if (list_empty(&sdp->sfds)) { /* no existing opens on this device */ sdp->sgdebug = 0; q = sdp->device->request_queue; sdp->sg_tablesize = min(q->max_hw_segments, @@ -303,16 +295,20 @@ sg_open(struct inode *inode, struct file *filp) if ((sfp = sg_add_sfp(sdp, dev))) filp->private_data = sfp; else { - if (flags & O_EXCL) + if (flags & O_EXCL) { sdp->exclude = 0; /* undo if error */ + wake_up_interruptible(&sdp->o_excl_wait); + } retval = -ENOMEM; goto error_out; } - unlock_kernel(); - return 0; - - error_out: - scsi_device_put(sdp->device); + retval = 0; +error_out: + if (retval) + scsi_device_put(sdp->device); +sg_put: + if (sdp) + sg_put_dev(sdp); unlock_kernel(); return retval; } @@ -327,13 +323,13 @@ sg_release(struct inode *inode, struct file *filp) if ((!(sfp = (Sg_fd *) filp->private_data)) || (!(sdp = sfp->parentdp))) return -ENXIO; SCSI_LOG_TIMEOUT(3, printk("sg_release: %s\n", sdp->disk->disk_name)); - if (0 == sg_remove_sfp(sdp, sfp)) { /* Returns 1 when sdp gone */ - if (!sdp->detached) { - scsi_device_put(sdp->device); - } - sdp->exclude = 0; - wake_up_interruptible(&sdp->o_excl_wait); - } + + sfp->closed = 1; + + sdp->exclude = 0; + wake_up_interruptible(&sdp->o_excl_wait); + + kref_put(&sfp->f_ref, sg_remove_sfp); return 0; } @@ -557,7 +553,8 @@ sg_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos) return -EFAULT; blocking = !(filp->f_flags & O_NONBLOCK); if (old_hdr.reply_len < 0) - return sg_new_write(sfp, filp, buf, count, blocking, 0, NULL); + return sg_new_write(sfp, filp, buf, count, + blocking, 0, 0, NULL); if (count < (SZ_SG_HEADER + 6)) return -EIO; /* The minimum scsi command length is 6 bytes. */ @@ -638,7 +635,7 @@ sg_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos) static ssize_t sg_new_write(Sg_fd *sfp, struct file *file, const char __user *buf, - size_t count, int blocking, int read_only, + size_t count, int blocking, int read_only, int sg_io_owned, Sg_request **o_srp) { int k; @@ -658,6 +655,7 @@ sg_new_write(Sg_fd *sfp, struct file *file, const char __user *buf, SCSI_LOG_TIMEOUT(1, printk("sg_new_write: queue full\n")); return -EDOM; } + srp->sg_io_owned = sg_io_owned; hp = &srp->header; if (__copy_from_user(hp, buf, SZ_SG_IO_HDR)) { sg_remove_request(sfp, srp); @@ -755,24 +753,13 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp, hp->duration = jiffies_to_msecs(jiffies); srp->rq->timeout = timeout; + kref_get(&sfp->f_ref); /* sg_rq_end_io() does kref_put(). */ blk_execute_rq_nowait(sdp->device->request_queue, sdp->disk, srp->rq, 1, sg_rq_end_io); return 0; } static int -sg_srp_done(Sg_request *srp, Sg_fd *sfp) -{ - unsigned long iflags; - int done; - - read_lock_irqsave(&sfp->rq_list_lock, iflags); - done = srp->done; - read_unlock_irqrestore(&sfp->rq_list_lock, iflags); - return done; -} - -static int sg_ioctl(struct inode *inode, struct file *filp, unsigned int cmd_in, unsigned long arg) { @@ -804,27 +791,26 @@ sg_ioctl(struct inode *inode, struct file *filp, return -EFAULT; result = sg_new_write(sfp, filp, p, SZ_SG_IO_HDR, - blocking, read_only, &srp); + blocking, read_only, 1, &srp); if (result < 0) return result; - srp->sg_io_owned = 1; while (1) { result = 0; /* following macro to beat race condition */ __wait_event_interruptible(sfp->read_wait, - (sdp->detached || sfp->closed || sg_srp_done(srp, sfp)), - result); + (srp->done || sdp->detached), + result); if (sdp->detached) return -ENODEV; - if (sfp->closed) - return 0; /* request packet dropped already */ - if (0 == result) + write_lock_irq(&sfp->rq_list_lock); + if (srp->done) { + srp->done = 2; + write_unlock_irq(&sfp->rq_list_lock); break; + } srp->orphan = 1; + write_unlock_irq(&sfp->rq_list_lock); return result; /* -ERESTARTSYS because signal hit process */ } - write_lock_irqsave(&sfp->rq_list_lock, iflags); - srp->done = 2; - write_unlock_irqrestore(&sfp->rq_list_lock, iflags); result = sg_new_read(sfp, p, SZ_SG_IO_HDR, srp); return (result < 0) ? result : 0; } @@ -1238,6 +1224,15 @@ sg_mmap(struct file *filp, struct vm_area_struct *vma) return 0; } +static void sg_rq_end_io_usercontext(struct work_struct *work) +{ + struct sg_request *srp = container_of(work, struct sg_request, ew.work); + struct sg_fd *sfp = srp->parentfp; + + sg_finish_rem_req(srp); + kref_put(&sfp->f_ref, sg_remove_sfp); +} + /* * This function is a "bottom half" handler that is called by the mid * level when a command is completed (or has failed). @@ -1245,24 +1240,23 @@ sg_mmap(struct file *filp, struct vm_area_struct *vma) static void sg_rq_end_io(struct request *rq, int uptodate) { struct sg_request *srp = rq->end_io_data; - Sg_device *sdp = NULL; + Sg_device *sdp; Sg_fd *sfp; unsigned long iflags; unsigned int ms; char *sense; - int result, resid; + int result, resid, done = 1; - if (NULL == srp) { - printk(KERN_ERR "sg_cmd_done: NULL request\n"); + if (WARN_ON(srp->done != 0)) return; - } + sfp = srp->parentfp; - if (sfp) - sdp = sfp->parentdp; - if ((NULL == sdp) || sdp->detached) { - printk(KERN_INFO "sg_cmd_done: device detached\n"); + if (WARN_ON(sfp == NULL)) return; - } + + sdp = sfp->parentdp; + if (unlikely(sdp->detached)) + printk(KERN_INFO "sg_rq_end_io: device detached\n"); sense = rq->sense; result = rq->errors; @@ -1301,33 +1295,25 @@ static void sg_rq_end_io(struct request *rq, int uptodate) } /* Rely on write phase to clean out srp status values, so no "else" */ - if (sfp->closed) { /* whoops this fd already released, cleanup */ - SCSI_LOG_TIMEOUT(1, printk("sg_cmd_done: already closed, freeing ...\n")); - sg_finish_rem_req(srp); - srp = NULL; - if (NULL == sfp->headrp) { - SCSI_LOG_TIMEOUT(1, printk("sg_cmd_done: already closed, final cleanup\n")); - if (0 == sg_remove_sfp(sdp, sfp)) { /* device still present */ - scsi_device_put(sdp->device); - } - sfp = NULL; - } - } else if (srp && srp->orphan) { + write_lock_irqsave(&sfp->rq_list_lock, iflags); + if (unlikely(srp->orphan)) { if (sfp->keep_orphan) srp->sg_io_owned = 0; - else { - sg_finish_rem_req(srp); - srp = NULL; - } + else + done = 0; } - if (sfp && srp) { - /* Now wake up any sg_read() that is waiting for this packet. */ - kill_fasync(&sfp->async_qp, SIGPOLL, POLL_IN); - write_lock_irqsave(&sfp->rq_list_lock, iflags); - srp->done = 1; + srp->done = done; + write_unlock_irqrestore(&sfp->rq_list_lock, iflags); + + if (likely(done)) { + /* Now wake up any sg_read() that is waiting for this + * packet. + */ wake_up_interruptible(&sfp->read_wait); - write_unlock_irqrestore(&sfp->rq_list_lock, iflags); - } + kill_fasync(&sfp->async_qp, SIGPOLL, POLL_IN); + kref_put(&sfp->f_ref, sg_remove_sfp); + } else + execute_in_process_context(sg_rq_end_io_usercontext, &srp->ew); } static struct file_operations sg_fops = { @@ -1362,17 +1348,18 @@ static Sg_device *sg_alloc(struct gendisk *disk, struct scsi_device *scsidp) printk(KERN_WARNING "kmalloc Sg_device failure\n"); return ERR_PTR(-ENOMEM); } - error = -ENOMEM; + if (!idr_pre_get(&sg_index_idr, GFP_KERNEL)) { printk(KERN_WARNING "idr expansion Sg_device failure\n"); + error = -ENOMEM; goto out; } write_lock_irqsave(&sg_index_lock, iflags); - error = idr_get_new(&sg_index_idr, sdp, &k); - write_unlock_irqrestore(&sg_index_lock, iflags); + error = idr_get_new(&sg_index_idr, sdp, &k); if (error) { + write_unlock_irqrestore(&sg_index_lock, iflags); printk(KERN_WARNING "idr allocation Sg_device failure: %d\n", error); goto out; @@ -1386,9 +1373,13 @@ static Sg_device *sg_alloc(struct gendisk *disk, struct scsi_device *scsidp) disk->first_minor = k; sdp->disk = disk; sdp->device = scsidp; + INIT_LIST_HEAD(&sdp->sfds); init_waitqueue_head(&sdp->o_excl_wait); sdp->sg_tablesize = min(q->max_hw_segments, q->max_phys_segments); sdp->index = k; + kref_init(&sdp->d_ref); + + write_unlock_irqrestore(&sg_index_lock, iflags); error = 0; out: @@ -1399,6 +1390,8 @@ static Sg_device *sg_alloc(struct gendisk *disk, struct scsi_device *scsidp) return sdp; overflow: + idr_remove(&sg_index_idr, k); + write_unlock_irqrestore(&sg_index_lock, iflags); sdev_printk(KERN_WARNING, scsidp, "Unable to attach sg device type=%d, minor " "number exceeds %d\n", scsidp->type, SG_MAX_DEVS - 1); @@ -1486,49 +1479,46 @@ out: return error; } -static void -sg_remove(struct device *cl_dev, struct class_interface *cl_intf) +static void sg_device_destroy(struct kref *kref) +{ + struct sg_device *sdp = container_of(kref, struct sg_device, d_ref); + unsigned long flags; + + /* CAUTION! Note that the device can still be found via idr_find() + * even though the refcount is 0. Therefore, do idr_remove() BEFORE + * any other cleanup. + */ + + write_lock_irqsave(&sg_index_lock, flags); + idr_remove(&sg_index_idr, sdp->index); + write_unlock_irqrestore(&sg_index_lock, flags); + + SCSI_LOG_TIMEOUT(3, + printk("sg_device_destroy: %s\n", + sdp->disk->disk_name)); + + put_disk(sdp->disk); + kfree(sdp); +} + +static void sg_remove(struct device *cl_dev, struct class_interface *cl_intf) { struct scsi_device *scsidp = to_scsi_device(cl_dev->parent); Sg_device *sdp = dev_get_drvdata(cl_dev); unsigned long iflags; Sg_fd *sfp; - Sg_fd *tsfp; - Sg_request *srp; - Sg_request *tsrp; - int delay; - if (!sdp) + if (!sdp || sdp->detached) return; - delay = 0; + SCSI_LOG_TIMEOUT(3, printk("sg_remove: %s\n", sdp->disk->disk_name)); + + /* Need a write lock to set sdp->detached. */ write_lock_irqsave(&sg_index_lock, iflags); - if (sdp->headfp) { - sdp->detached = 1; - for (sfp = sdp->headfp; sfp; sfp = tsfp) { - tsfp = sfp->nextfp; - for (srp = sfp->headrp; srp; srp = tsrp) { - tsrp = srp->nextrp; - if (sfp->closed || (0 == sg_srp_done(srp, sfp))) - sg_finish_rem_req(srp); - } - if (sfp->closed) { - scsi_device_put(sdp->device); - __sg_remove_sfp(sdp, sfp); - } else { - delay = 1; - wake_up_interruptible(&sfp->read_wait); - kill_fasync(&sfp->async_qp, SIGPOLL, - POLL_HUP); - } - } - SCSI_LOG_TIMEOUT(3, printk("sg_remove: dev=%d, dirty\n", sdp->index)); - if (NULL == sdp->headfp) { - idr_remove(&sg_index_idr, sdp->index); - } - } else { /* nothing active, simple case */ - SCSI_LOG_TIMEOUT(3, printk("sg_remove: dev=%d\n", sdp->index)); - idr_remove(&sg_index_idr, sdp->index); + sdp->detached = 1; + list_for_each_entry(sfp, &sdp->sfds, sfd_siblings) { + wake_up_interruptible(&sfp->read_wait); + kill_fasync(&sfp->async_qp, SIGPOLL, POLL_HUP); } write_unlock_irqrestore(&sg_index_lock, iflags); @@ -1536,13 +1526,8 @@ sg_remove(struct device *cl_dev, struct class_interface *cl_intf) device_destroy(sg_sysfs_class, MKDEV(SCSI_GENERIC_MAJOR, sdp->index)); cdev_del(sdp->cdev); sdp->cdev = NULL; - put_disk(sdp->disk); - sdp->disk = NULL; - if (NULL == sdp->headfp) - kfree(sdp); - if (delay) - msleep(10); /* dirty detach so delay device destruction */ + sg_put_dev(sdp); } module_param_named(scatter_elem_sz, scatter_elem_sz, int, S_IRUGO | S_IWUSR); @@ -1736,8 +1721,8 @@ sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size) return -EFAULT; if (0 == blk_size) ++blk_size; /* don't know why */ -/* round request up to next highest SG_SECTOR_SZ byte boundary */ - blk_size = (blk_size + SG_SECTOR_MSK) & (~SG_SECTOR_MSK); + /* round request up to next highest SG_SECTOR_SZ byte boundary */ + blk_size = ALIGN(blk_size, SG_SECTOR_SZ); SCSI_LOG_TIMEOUT(4, printk("sg_build_indirect: buff_size=%d, blk_size=%d\n", buff_size, blk_size)); @@ -1939,22 +1924,6 @@ sg_get_rq_mark(Sg_fd * sfp, int pack_id) return resp; } -#ifdef CONFIG_SCSI_PROC_FS -static Sg_request * -sg_get_nth_request(Sg_fd * sfp, int nth) -{ - Sg_request *resp; - unsigned long iflags; - int k; - - read_lock_irqsave(&sfp->rq_list_lock, iflags); - for (k = 0, resp = sfp->headrp; resp && (k < nth); - ++k, resp = resp->nextrp) ; - read_unlock_irqrestore(&sfp->rq_list_lock, iflags); - return resp; -} -#endif - /* always adds to end of list */ static Sg_request * sg_add_request(Sg_fd * sfp) @@ -2030,22 +1999,6 @@ sg_remove_request(Sg_fd * sfp, Sg_request * srp) return res; } -#ifdef CONFIG_SCSI_PROC_FS -static Sg_fd * -sg_get_nth_sfp(Sg_device * sdp, int nth) -{ - Sg_fd *resp; - unsigned long iflags; - int k; - - read_lock_irqsave(&sg_index_lock, iflags); - for (k = 0, resp = sdp->headfp; resp && (k < nth); - ++k, resp = resp->nextfp) ; - read_unlock_irqrestore(&sg_index_lock, iflags); - return resp; -} -#endif - static Sg_fd * sg_add_sfp(Sg_device * sdp, int dev) { @@ -2060,6 +2013,7 @@ sg_add_sfp(Sg_device * sdp, int dev) init_waitqueue_head(&sfp->read_wait); rwlock_init(&sfp->rq_list_lock); + kref_init(&sfp->f_ref); sfp->timeout = SG_DEFAULT_TIMEOUT; sfp->timeout_user = SG_DEFAULT_TIMEOUT_USER; sfp->force_packid = SG_DEF_FORCE_PACK_ID; @@ -2069,14 +2023,7 @@ sg_add_sfp(Sg_device * sdp, int dev) sfp->keep_orphan = SG_DEF_KEEP_ORPHAN; sfp->parentdp = sdp; write_lock_irqsave(&sg_index_lock, iflags); - if (!sdp->headfp) - sdp->headfp = sfp; - else { /* add to tail of existing list */ - Sg_fd *pfp = sdp->headfp; - while (pfp->nextfp) - pfp = pfp->nextfp; - pfp->nextfp = sfp; - } + list_add_tail(&sfp->sfd_siblings, &sdp->sfds); write_unlock_irqrestore(&sg_index_lock, iflags); SCSI_LOG_TIMEOUT(3, printk("sg_add_sfp: sfp=0x%p\n", sfp)); if (unlikely(sg_big_buff != def_reserved_size)) @@ -2087,75 +2034,52 @@ sg_add_sfp(Sg_device * sdp, int dev) sg_build_reserve(sfp, bufflen); SCSI_LOG_TIMEOUT(3, printk("sg_add_sfp: bufflen=%d, k_use_sg=%d\n", sfp->reserve.bufflen, sfp->reserve.k_use_sg)); + + kref_get(&sdp->d_ref); + __module_get(THIS_MODULE); return sfp; } -static void -__sg_remove_sfp(Sg_device * sdp, Sg_fd * sfp) +static void sg_remove_sfp_usercontext(struct work_struct *work) { - Sg_fd *fp; - Sg_fd *prev_fp; + struct sg_fd *sfp = container_of(work, struct sg_fd, ew.work); + struct sg_device *sdp = sfp->parentdp; + + /* Cleanup any responses which were never read(). */ + while (sfp->headrp) + sg_finish_rem_req(sfp->headrp); - prev_fp = sdp->headfp; - if (sfp == prev_fp) - sdp->headfp = prev_fp->nextfp; - else { - while ((fp = prev_fp->nextfp)) { - if (sfp == fp) { - prev_fp->nextfp = fp->nextfp; - break; - } - prev_fp = fp; - } - } if (sfp->reserve.bufflen > 0) { - SCSI_LOG_TIMEOUT(6, - printk("__sg_remove_sfp: bufflen=%d, k_use_sg=%d\n", - (int) sfp->reserve.bufflen, (int) sfp->reserve.k_use_sg)); + SCSI_LOG_TIMEOUT(6, + printk("sg_remove_sfp: bufflen=%d, k_use_sg=%d\n", + (int) sfp->reserve.bufflen, + (int) sfp->reserve.k_use_sg)); sg_remove_scat(&sfp->reserve); } - sfp->parentdp = NULL; - SCSI_LOG_TIMEOUT(6, printk("__sg_remove_sfp: sfp=0x%p\n", sfp)); + + SCSI_LOG_TIMEOUT(6, + printk("sg_remove_sfp: %s, sfp=0x%p\n", + sdp->disk->disk_name, + sfp)); kfree(sfp); + + scsi_device_put(sdp->device); + sg_put_dev(sdp); + module_put(THIS_MODULE); } -/* Returns 0 in normal case, 1 when detached and sdp object removed */ -static int -sg_remove_sfp(Sg_device * sdp, Sg_fd * sfp) +static void sg_remove_sfp(struct kref *kref) { - Sg_request *srp; - Sg_request *tsrp; - int dirty = 0; - int res = 0; + struct sg_fd *sfp = container_of(kref, struct sg_fd, f_ref); + struct sg_device *sdp = sfp->parentdp; + unsigned long iflags; - for (srp = sfp->headrp; srp; srp = tsrp) { - tsrp = srp->nextrp; - if (sg_srp_done(srp, sfp)) - sg_finish_rem_req(srp); - else - ++dirty; - } - if (0 == dirty) { - unsigned long iflags; - - write_lock_irqsave(&sg_index_lock, iflags); - __sg_remove_sfp(sdp, sfp); - if (sdp->detached && (NULL == sdp->headfp)) { - idr_remove(&sg_index_idr, sdp->index); - kfree(sdp); - res = 1; - } - write_unlock_irqrestore(&sg_index_lock, iflags); - } else { - /* MOD_INC's to inhibit unloading sg and associated adapter driver */ - /* only bump the access_count if we actually succeeded in - * throwing another counter on the host module */ - scsi_device_get(sdp->device); /* XXX: retval ignored? */ - sfp->closed = 1; /* flag dirty state on this fd */ - SCSI_LOG_TIMEOUT(1, printk("sg_remove_sfp: worrisome, %d writes pending\n", - dirty)); - } - return res; + write_lock_irqsave(&sg_index_lock, iflags); + list_del(&sfp->sfd_siblings); + write_unlock_irqrestore(&sg_index_lock, iflags); + wake_up_interruptible(&sdp->o_excl_wait); + + execute_in_process_context(sg_remove_sfp_usercontext, &sfp->ew); } static int @@ -2197,19 +2121,38 @@ sg_last_dev(void) } #endif -static Sg_device * -sg_get_dev(int dev) +/* must be called with sg_index_lock held */ +static Sg_device *sg_lookup_dev(int dev) { - Sg_device *sdp; - unsigned long iflags; + return idr_find(&sg_index_idr, dev); +} - read_lock_irqsave(&sg_index_lock, iflags); - sdp = idr_find(&sg_index_idr, dev); - read_unlock_irqrestore(&sg_index_lock, iflags); +static Sg_device *sg_get_dev(int dev) +{ + struct sg_device *sdp; + unsigned long flags; + + read_lock_irqsave(&sg_index_lock, flags); + sdp = sg_lookup_dev(dev); + if (!sdp) + sdp = ERR_PTR(-ENXIO); + else if (sdp->detached) { + /* If sdp->detached, then the refcount may already be 0, in + * which case it would be a bug to do kref_get(). + */ + sdp = ERR_PTR(-ENODEV); + } else + kref_get(&sdp->d_ref); + read_unlock_irqrestore(&sg_index_lock, flags); return sdp; } +static void sg_put_dev(struct sg_device *sdp) +{ + kref_put(&sdp->d_ref, sg_device_destroy); +} + #ifdef CONFIG_SCSI_PROC_FS static struct proc_dir_entry *sg_proc_sgp = NULL; @@ -2466,8 +2409,10 @@ static int sg_proc_seq_show_dev(struct seq_file *s, void *v) struct sg_proc_deviter * it = (struct sg_proc_deviter *) v; Sg_device *sdp; struct scsi_device *scsidp; + unsigned long iflags; - sdp = it ? sg_get_dev(it->index) : NULL; + read_lock_irqsave(&sg_index_lock, iflags); + sdp = it ? sg_lookup_dev(it->index) : NULL; if (sdp && (scsidp = sdp->device) && (!sdp->detached)) seq_printf(s, "%d\t%d\t%d\t%d\t%d\t%d\t%d\t%d\t%d\n", scsidp->host->host_no, scsidp->channel, @@ -2478,6 +2423,7 @@ static int sg_proc_seq_show_dev(struct seq_file *s, void *v) (int) scsi_device_online(scsidp)); else seq_printf(s, "-1\t-1\t-1\t-1\t-1\t-1\t-1\t-1\t-1\n"); + read_unlock_irqrestore(&sg_index_lock, iflags); return 0; } @@ -2491,16 +2437,20 @@ static int sg_proc_seq_show_devstrs(struct seq_file *s, void *v) struct sg_proc_deviter * it = (struct sg_proc_deviter *) v; Sg_device *sdp; struct scsi_device *scsidp; + unsigned long iflags; - sdp = it ? sg_get_dev(it->index) : NULL; + read_lock_irqsave(&sg_index_lock, iflags); + sdp = it ? sg_lookup_dev(it->index) : NULL; if (sdp && (scsidp = sdp->device) && (!sdp->detached)) seq_printf(s, "%8.8s\t%16.16s\t%4.4s\n", scsidp->vendor, scsidp->model, scsidp->rev); else seq_printf(s, "<no active device>\n"); + read_unlock_irqrestore(&sg_index_lock, iflags); return 0; } +/* must be called while holding sg_index_lock */ static void sg_proc_debug_helper(struct seq_file *s, Sg_device * sdp) { int k, m, new_interface, blen, usg; @@ -2510,9 +2460,12 @@ static void sg_proc_debug_helper(struct seq_file *s, Sg_device * sdp) const char * cp; unsigned int ms; - for (k = 0; (fp = sg_get_nth_sfp(sdp, k)); ++k) { + k = 0; + list_for_each_entry(fp, &sdp->sfds, sfd_siblings) { + k++; + read_lock(&fp->rq_list_lock); /* irqs already disabled */ seq_printf(s, " FD(%d): timeout=%dms bufflen=%d " - "(res)sgat=%d low_dma=%d\n", k + 1, + "(res)sgat=%d low_dma=%d\n", k, jiffies_to_msecs(fp->timeout), fp->reserve.bufflen, (int) fp->reserve.k_use_sg, @@ -2520,7 +2473,9 @@ static void sg_proc_debug_helper(struct seq_file *s, Sg_device * sdp) seq_printf(s, " cmd_q=%d f_packid=%d k_orphan=%d closed=%d\n", (int) fp->cmd_q, (int) fp->force_packid, (int) fp->keep_orphan, (int) fp->closed); - for (m = 0; (srp = sg_get_nth_request(fp, m)); ++m) { + for (m = 0, srp = fp->headrp; + srp != NULL; + ++m, srp = srp->nextrp) { hp = &srp->header; new_interface = (hp->interface_id == '\0') ? 0 : 1; if (srp->res_used) { @@ -2557,6 +2512,7 @@ static void sg_proc_debug_helper(struct seq_file *s, Sg_device * sdp) } if (0 == m) seq_printf(s, " No requests active\n"); + read_unlock(&fp->rq_list_lock); } } @@ -2569,39 +2525,34 @@ static int sg_proc_seq_show_debug(struct seq_file *s, void *v) { struct sg_proc_deviter * it = (struct sg_proc_deviter *) v; Sg_device *sdp; + unsigned long iflags; if (it && (0 == it->index)) { seq_printf(s, "max_active_device=%d(origin 1)\n", (int)it->max); seq_printf(s, " def_reserved_size=%d\n", sg_big_buff); } - sdp = it ? sg_get_dev(it->index) : NULL; - if (sdp) { - struct scsi_device *scsidp = sdp->device; - if (NULL == scsidp) { - seq_printf(s, "device %d detached ??\n", - (int)it->index); - return 0; - } + read_lock_irqsave(&sg_index_lock, iflags); + sdp = it ? sg_lookup_dev(it->index) : NULL; + if (sdp && !list_empty(&sdp->sfds)) { + struct scsi_device *scsidp = sdp->device; - if (sg_get_nth_sfp(sdp, 0)) { - seq_printf(s, " >>> device=%s ", - sdp->disk->disk_name); - if (sdp->detached) - seq_printf(s, "detached pending close "); - else - seq_printf - (s, "scsi%d chan=%d id=%d lun=%d em=%d", - scsidp->host->host_no, - scsidp->channel, scsidp->id, - scsidp->lun, - scsidp->host->hostt->emulated); - seq_printf(s, " sg_tablesize=%d excl=%d\n", - sdp->sg_tablesize, sdp->exclude); - } + seq_printf(s, " >>> device=%s ", sdp->disk->disk_name); + if (sdp->detached) + seq_printf(s, "detached pending close "); + else + seq_printf + (s, "scsi%d chan=%d id=%d lun=%d em=%d", + scsidp->host->host_no, + scsidp->channel, scsidp->id, + scsidp->lun, + scsidp->host->hostt->emulated); + seq_printf(s, " sg_tablesize=%d excl=%d\n", + sdp->sg_tablesize, sdp->exclude); sg_proc_debug_helper(s, sdp); } + read_unlock_irqrestore(&sg_index_lock, iflags); return 0; } diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index c6f19ee8f2c..eb24efea8f1 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -374,9 +374,9 @@ static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt) if (!debugging) { /* Abnormal conditions for tape */ if (!cmdstatp->have_sense) printk(KERN_WARNING - "%s: Error %x (sugg. bt 0x%x, driver bt 0x%x, host bt 0x%x).\n", - name, result, suggestion(result), - driver_byte(result) & DRIVER_MASK, host_byte(result)); + "%s: Error %x (driver bt 0x%x, host bt 0x%x).\n", + name, result, driver_byte(result), + host_byte(result)); else if (cmdstatp->have_sense && scode != NO_SENSE && scode != RECOVERED_ERROR && diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c index a3a18ad7312..47b614e8580 100644 --- a/drivers/scsi/stex.c +++ b/drivers/scsi/stex.c @@ -1,7 +1,7 @@ /* * SuperTrak EX Series Storage Controller driver for Linux * - * Copyright (C) 2005, 2006 Promise Technology Inc. + * Copyright (C) 2005-2009 Promise Technology Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -36,8 +36,8 @@ #include <scsi/scsi_eh.h> #define DRV_NAME "stex" -#define ST_DRIVER_VERSION "3.6.0000.1" -#define ST_VER_MAJOR 3 +#define ST_DRIVER_VERSION "4.6.0000.1" +#define ST_VER_MAJOR 4 #define ST_VER_MINOR 6 #define ST_OEM 0 #define ST_BUILD_VER 1 @@ -103,7 +103,7 @@ enum { MU_REQ_COUNT = (MU_MAX_REQUEST + 1), MU_STATUS_COUNT = (MU_MAX_REQUEST + 1), - STEX_CDB_LENGTH = MAX_COMMAND_SIZE, + STEX_CDB_LENGTH = 16, REQ_VARIABLE_LEN = 1024, STATUS_VAR_LEN = 128, ST_CAN_QUEUE = MU_MAX_REQUEST, @@ -114,15 +114,19 @@ enum { SG_CF_EOT = 0x80, /* end of table */ SG_CF_64B = 0x40, /* 64 bit item */ SG_CF_HOST = 0x20, /* sg in host memory */ + MSG_DATA_DIR_ND = 0, + MSG_DATA_DIR_IN = 1, + MSG_DATA_DIR_OUT = 2, st_shasta = 0, st_vsc = 1, st_vsc1 = 2, st_yosemite = 3, + st_seq = 4, PASSTHRU_REQ_TYPE = 0x00000001, PASSTHRU_REQ_NO_WAKEUP = 0x00000100, - ST_INTERNAL_TIMEOUT = 30, + ST_INTERNAL_TIMEOUT = 180, ST_TO_CMD = 0, ST_FROM_CMD = 1, @@ -152,35 +156,6 @@ enum { ST_ADDITIONAL_MEM = 0x200000, }; -/* SCSI inquiry data */ -typedef struct st_inq { - u8 DeviceType :5; - u8 DeviceTypeQualifier :3; - u8 DeviceTypeModifier :7; - u8 RemovableMedia :1; - u8 Versions; - u8 ResponseDataFormat :4; - u8 HiSupport :1; - u8 NormACA :1; - u8 ReservedBit :1; - u8 AERC :1; - u8 AdditionalLength; - u8 Reserved[2]; - u8 SoftReset :1; - u8 CommandQueue :1; - u8 Reserved2 :1; - u8 LinkedCommands :1; - u8 Synchronous :1; - u8 Wide16Bit :1; - u8 Wide32Bit :1; - u8 RelativeAddressing :1; - u8 VendorId[8]; - u8 ProductId[16]; - u8 ProductRevisionLevel[4]; - u8 VendorSpecific[20]; - u8 Reserved3[40]; -} ST_INQ; - struct st_sgitem { u8 ctrl; /* SG_CF_xxx */ u8 reserved[3]; @@ -222,7 +197,7 @@ struct req_msg { u8 target; u8 task_attr; u8 task_manage; - u8 prd_entry; + u8 data_dir; u8 payload_sz; /* payload size in 4-byte, not used */ u8 cdb[STEX_CDB_LENGTH]; u8 variable[REQ_VARIABLE_LEN]; @@ -284,7 +259,7 @@ struct st_drvver { #define MU_REQ_BUFFER_SIZE (MU_REQ_COUNT * sizeof(struct req_msg)) #define MU_STATUS_BUFFER_SIZE (MU_STATUS_COUNT * sizeof(struct status_msg)) #define MU_BUFFER_SIZE (MU_REQ_BUFFER_SIZE + MU_STATUS_BUFFER_SIZE) -#define STEX_EXTRA_SIZE max(sizeof(struct st_frame), sizeof(ST_INQ)) +#define STEX_EXTRA_SIZE sizeof(struct st_frame) #define STEX_BUFFER_SIZE (MU_BUFFER_SIZE + STEX_EXTRA_SIZE) struct st_ccb { @@ -346,8 +321,8 @@ MODULE_VERSION(ST_DRIVER_VERSION); static void stex_gettime(__le32 *time) { struct timeval tv; - do_gettimeofday(&tv); + do_gettimeofday(&tv); *time = cpu_to_le32(tv.tv_sec & 0xffffffff); *(time + 1) = cpu_to_le32((tv.tv_sec >> 16) >> 16); } @@ -368,7 +343,7 @@ static void stex_invalid_field(struct scsi_cmnd *cmd, { cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; - /* "Invalid field in cbd" */ + /* "Invalid field in cdb" */ scsi_build_sense_buffer(0, cmd->sense_buffer, ILLEGAL_REQUEST, 0x24, 0x0); done(cmd); @@ -497,6 +472,7 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *)) unsigned int id,lun; struct req_msg *req; u16 tag; + host = cmd->device->host; id = cmd->device->id; lun = cmd->device->lun; @@ -508,6 +484,7 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *)) static char ms10_caching_page[12] = { 0, 0x12, 0, 0, 0, 0, 0, 0, 0x8, 0xa, 0x4, 0 }; unsigned char page; + page = cmd->cmnd[2] & 0x3f; if (page == 0x8 || page == 0x3f) { scsi_sg_copy_from_buffer(cmd, ms10_caching_page, @@ -551,6 +528,7 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *)) if (cmd->cmnd[1] == PASSTHRU_GET_DRVVER) { struct st_drvver ver; size_t cp_len = sizeof(ver); + ver.major = ST_VER_MAJOR; ver.minor = ST_VER_MINOR; ver.oem = ST_OEM; @@ -584,6 +562,13 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *)) /* cdb */ memcpy(req->cdb, cmd->cmnd, STEX_CDB_LENGTH); + if (cmd->sc_data_direction == DMA_FROM_DEVICE) + req->data_dir = MSG_DATA_DIR_IN; + else if (cmd->sc_data_direction == DMA_TO_DEVICE) + req->data_dir = MSG_DATA_DIR_OUT; + else + req->data_dir = MSG_DATA_DIR_ND; + hba->ccb[tag].cmd = cmd; hba->ccb[tag].sense_bufflen = SCSI_SENSE_BUFFERSIZE; hba->ccb[tag].sense_buffer = cmd->sense_buffer; @@ -642,6 +627,7 @@ static void stex_copy_data(struct st_ccb *ccb, struct status_msg *resp, unsigned int variable) { size_t count = variable; + if (resp->scsi_status != SAM_STAT_GOOD) { if (ccb->sense_buffer != NULL) memcpy(ccb->sense_buffer, resp->variable, @@ -661,24 +647,6 @@ static void stex_ys_commands(struct st_hba *hba, resp->scsi_status != SAM_STAT_CHECK_CONDITION) { scsi_set_resid(ccb->cmd, scsi_bufflen(ccb->cmd) - le32_to_cpu(*(__le32 *)&resp->variable[0])); - return; - } - - if (resp->srb_status != 0) - return; - - /* determine inquiry command status by DeviceTypeQualifier */ - if (ccb->cmd->cmnd[0] == INQUIRY && - resp->scsi_status == SAM_STAT_GOOD) { - ST_INQ *inq_data; - - scsi_sg_copy_to_buffer(ccb->cmd, hba->copy_buffer, - STEX_EXTRA_SIZE); - inq_data = (ST_INQ *)hba->copy_buffer; - if (inq_data->DeviceTypeQualifier != 0) - ccb->srb_status = SRB_STATUS_SELECTION_TIMEOUT; - else - ccb->srb_status = SRB_STATUS_SUCCESS; } } @@ -746,6 +714,7 @@ static void stex_mu_intr(struct st_hba *hba, u32 doorbell) stex_copy_data(ccb, resp, size); } + ccb->req = NULL; ccb->srb_status = resp->srb_status; ccb->scsi_status = resp->scsi_status; @@ -983,6 +952,7 @@ static int stex_reset(struct scsi_cmnd *cmd) struct st_hba *hba; unsigned long flags; unsigned long before; + hba = (struct st_hba *) &cmd->device->host->hostdata[0]; printk(KERN_INFO DRV_NAME @@ -1067,6 +1037,7 @@ static struct scsi_host_template driver_template = { static int stex_set_dma_mask(struct pci_dev * pdev) { int ret; + if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK) && !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) return 0; @@ -1124,9 +1095,9 @@ stex_probe(struct pci_dev *pdev, const struct pci_device_id *id) } hba->cardtype = (unsigned int) id->driver_data; - if (hba->cardtype == st_vsc && (pdev->subsystem_device & 0xf) == 0x1) + if (hba->cardtype == st_vsc && (pdev->subsystem_device & 1)) hba->cardtype = st_vsc1; - hba->dma_size = (hba->cardtype == st_vsc1) ? + hba->dma_size = (hba->cardtype == st_vsc1 || hba->cardtype == st_seq) ? (STEX_BUFFER_SIZE + ST_ADDITIONAL_MEM) : (STEX_BUFFER_SIZE); hba->dma_mem = dma_alloc_coherent(&pdev->dev, hba->dma_size, &hba->dma_handle, GFP_KERNEL); @@ -1146,10 +1117,10 @@ stex_probe(struct pci_dev *pdev, const struct pci_device_id *id) host->max_lun = 8; host->max_id = 16 + 1; } else if (hba->cardtype == st_yosemite) { - host->max_lun = 128; + host->max_lun = 256; host->max_id = 1 + 1; } else { - /* st_vsc and st_vsc1 */ + /* st_vsc , st_vsc1 and st_seq */ host->max_lun = 1; host->max_id = 128 + 1; } @@ -1299,18 +1270,10 @@ static struct pci_device_id stex_pci_tbl[] = { { 0x105a, 0x7250, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_vsc }, /* st_yosemite */ - { 0x105a, 0x8650, PCI_ANY_ID, 0x4600, 0, 0, - st_yosemite }, /* SuperTrak EX4650 */ - { 0x105a, 0x8650, PCI_ANY_ID, 0x4610, 0, 0, - st_yosemite }, /* SuperTrak EX4650o */ - { 0x105a, 0x8650, PCI_ANY_ID, 0x8600, 0, 0, - st_yosemite }, /* SuperTrak EX8650EL */ - { 0x105a, 0x8650, PCI_ANY_ID, 0x8601, 0, 0, - st_yosemite }, /* SuperTrak EX8650 */ - { 0x105a, 0x8650, PCI_ANY_ID, 0x8602, 0, 0, - st_yosemite }, /* SuperTrak EX8654 */ - { 0x105a, 0x8650, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - st_yosemite }, /* generic st_yosemite */ + { 0x105a, 0x8650, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_yosemite }, + + /* st_seq */ + { 0x105a, 0x3360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_seq }, { } /* terminate list */ }; MODULE_DEVICE_TABLE(pci, stex_pci_tbl); diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index f4e6cde1fd0..23e78201588 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -792,9 +792,9 @@ static int sym53c8xx_slave_configure(struct scsi_device *sdev) /* * Select queue depth from driver setup. - * Donnot use more than configured by user. - * Use at least 2. - * Donnot use more than our maximum. + * Do not use more than configured by user. + * Use at least 1. + * Do not use more than our maximum. */ reqtags = sym_driver_setup.max_tag; if (reqtags > tp->usrtags) @@ -803,7 +803,7 @@ static int sym53c8xx_slave_configure(struct scsi_device *sdev) reqtags = 0; if (reqtags > SYM_CONF_MAX_TAG) reqtags = SYM_CONF_MAX_TAG; - depth_to_use = reqtags ? reqtags : 2; + depth_to_use = reqtags ? reqtags : 1; scsi_adjust_queue_depth(sdev, sdev->tagged_supported ? MSG_SIMPLE_TAG : 0, depth_to_use); @@ -1236,14 +1236,29 @@ static int sym53c8xx_proc_info(struct Scsi_Host *shost, char *buffer, #endif /* SYM_LINUX_PROC_INFO_SUPPORT */ /* + * Free resources claimed by sym_iomap_device(). Note that + * sym_free_resources() should be used instead of this function after calling + * sym_attach(). + */ +static void __devinit +sym_iounmap_device(struct sym_device *device) +{ + if (device->s.ioaddr) + pci_iounmap(device->pdev, device->s.ioaddr); + if (device->s.ramaddr) + pci_iounmap(device->pdev, device->s.ramaddr); +} + +/* * Free controller resources. */ -static void sym_free_resources(struct sym_hcb *np, struct pci_dev *pdev) +static void sym_free_resources(struct sym_hcb *np, struct pci_dev *pdev, + int do_free_irq) { /* * Free O/S specific resources. */ - if (pdev->irq) + if (do_free_irq) free_irq(pdev->irq, np->s.host); if (np->s.ioaddr) pci_iounmap(pdev, np->s.ioaddr); @@ -1271,10 +1286,11 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, { struct sym_data *sym_data; struct sym_hcb *np = NULL; - struct Scsi_Host *shost; + struct Scsi_Host *shost = NULL; struct pci_dev *pdev = dev->pdev; unsigned long flags; struct sym_fw *fw; + int do_free_irq = 0; printk(KERN_INFO "sym%d: <%s> rev 0x%x at pci %s irq %u\n", unit, dev->chip.name, pdev->revision, pci_name(pdev), @@ -1285,11 +1301,11 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, */ fw = sym_find_firmware(&dev->chip); if (!fw) - return NULL; + goto attach_failed; shost = scsi_host_alloc(tpnt, sizeof(*sym_data)); if (!shost) - return NULL; + goto attach_failed; sym_data = shost_priv(shost); /* @@ -1319,6 +1335,10 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, np->maxoffs = dev->chip.offset_max; np->maxburst = dev->chip.burst_max; np->myaddr = dev->host_id; + np->mmio_ba = (u32)dev->mmio_base; + np->ram_ba = (u32)dev->ram_base; + np->s.ioaddr = dev->s.ioaddr; + np->s.ramaddr = dev->s.ramaddr; /* * Edit its name. @@ -1334,22 +1354,6 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, goto attach_failed; } - /* - * Try to map the controller chip to - * virtual and physical memory. - */ - np->mmio_ba = (u32)dev->mmio_base; - np->s.ioaddr = dev->s.ioaddr; - np->s.ramaddr = dev->s.ramaddr; - - /* - * Map on-chip RAM if present and supported. - */ - if (!(np->features & FE_RAM)) - dev->ram_base = 0; - if (dev->ram_base) - np->ram_ba = (u32)dev->ram_base; - if (sym_hcb_attach(shost, fw, dev->nvram)) goto attach_failed; @@ -1364,6 +1368,7 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, sym_name(np), pdev->irq); goto attach_failed; } + do_free_irq = 1; /* * After SCSI devices have been opened, we cannot @@ -1416,12 +1421,13 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, "TERMINATION, DEVICE POWER etc.!\n", sym_name(np)); spin_unlock_irqrestore(shost->host_lock, flags); attach_failed: - if (!shost) - return NULL; - printf_info("%s: giving up ...\n", sym_name(np)); + printf_info("sym%d: giving up ...\n", unit); if (np) - sym_free_resources(np, pdev); - scsi_host_put(shost); + sym_free_resources(np, pdev, do_free_irq); + else + sym_iounmap_device(dev); + if (shost) + scsi_host_put(shost); return NULL; } @@ -1550,30 +1556,28 @@ static int __devinit sym_set_workarounds(struct sym_device *device) } /* - * Read and check the PCI configuration for any detected NCR - * boards and save data for attaching after all boards have - * been detected. + * Map HBA registers and on-chip SRAM (if present). */ -static void __devinit -sym_init_device(struct pci_dev *pdev, struct sym_device *device) +static int __devinit +sym_iomap_device(struct sym_device *device) { - int i = 2; + struct pci_dev *pdev = device->pdev; struct pci_bus_region bus_addr; - - device->host_id = SYM_SETUP_HOST_ID; - device->pdev = pdev; + int i = 2; pcibios_resource_to_bus(pdev, &bus_addr, &pdev->resource[1]); device->mmio_base = bus_addr.start; - /* - * If the BAR is 64-bit, resource 2 will be occupied by the - * upper 32 bits - */ - if (!pdev->resource[i].flags) - i++; - pcibios_resource_to_bus(pdev, &bus_addr, &pdev->resource[i]); - device->ram_base = bus_addr.start; + if (device->chip.features & FE_RAM) { + /* + * If the BAR is 64-bit, resource 2 will be occupied by the + * upper 32 bits + */ + if (!pdev->resource[i].flags) + i++; + pcibios_resource_to_bus(pdev, &bus_addr, &pdev->resource[i]); + device->ram_base = bus_addr.start; + } #ifdef CONFIG_SCSI_SYM53C8XX_MMIO if (device->mmio_base) @@ -1583,9 +1587,21 @@ sym_init_device(struct pci_dev *pdev, struct sym_device *device) if (!device->s.ioaddr) device->s.ioaddr = pci_iomap(pdev, 0, pci_resource_len(pdev, 0)); - if (device->ram_base) + if (!device->s.ioaddr) { + dev_err(&pdev->dev, "could not map registers; giving up.\n"); + return -EIO; + } + if (device->ram_base) { device->s.ramaddr = pci_iomap(pdev, i, pci_resource_len(pdev, i)); + if (!device->s.ramaddr) { + dev_warn(&pdev->dev, + "could not map SRAM; continuing anyway.\n"); + device->ram_base = 0; + } + } + + return 0; } /* @@ -1659,7 +1675,8 @@ static int sym_detach(struct Scsi_Host *shost, struct pci_dev *pdev) udelay(10); OUTB(np, nc_istat, 0); - sym_free_resources(np, pdev); + sym_free_resources(np, pdev, 1); + scsi_host_put(shost); return 1; } @@ -1696,9 +1713,13 @@ static int __devinit sym2_probe(struct pci_dev *pdev, struct sym_device sym_dev; struct sym_nvram nvram; struct Scsi_Host *shost; + int do_iounmap = 0; + int do_disable_device = 1; memset(&sym_dev, 0, sizeof(sym_dev)); memset(&nvram, 0, sizeof(nvram)); + sym_dev.pdev = pdev; + sym_dev.host_id = SYM_SETUP_HOST_ID; if (pci_enable_device(pdev)) goto leave; @@ -1708,12 +1729,17 @@ static int __devinit sym2_probe(struct pci_dev *pdev, if (pci_request_regions(pdev, NAME53C8XX)) goto disable; - sym_init_device(pdev, &sym_dev); if (sym_check_supported(&sym_dev)) goto free; - if (sym_check_raid(&sym_dev)) - goto leave; /* Don't disable the device */ + if (sym_iomap_device(&sym_dev)) + goto free; + do_iounmap = 1; + + if (sym_check_raid(&sym_dev)) { + do_disable_device = 0; /* Don't disable the device */ + goto free; + } if (sym_set_workarounds(&sym_dev)) goto free; @@ -1722,6 +1748,7 @@ static int __devinit sym2_probe(struct pci_dev *pdev, sym_get_nvram(&sym_dev, &nvram); + do_iounmap = 0; /* Don't sym_iounmap_device() after sym_attach(). */ shost = sym_attach(&sym2_template, attach_count, &sym_dev); if (!shost) goto free; @@ -1737,9 +1764,12 @@ static int __devinit sym2_probe(struct pci_dev *pdev, detach: sym_detach(pci_get_drvdata(pdev), pdev); free: + if (do_iounmap) + sym_iounmap_device(&sym_dev); pci_release_regions(pdev); disable: - pci_disable_device(pdev); + if (do_disable_device) + pci_disable_device(pdev); leave: return -ENODEV; } @@ -1749,7 +1779,6 @@ static void sym2_remove(struct pci_dev *pdev) struct Scsi_Host *shost = pci_get_drvdata(pdev); scsi_remove_host(shost); - scsi_host_put(shost); sym_detach(shost, pdev); pci_release_regions(pdev); pci_disable_device(pdev); diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index 98df1651404..ccea7db59f4 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -1433,13 +1433,12 @@ static int sym_prepare_nego(struct sym_hcb *np, struct sym_ccb *cp, u_char *msgp * Many devices implement PPR in a buggy way, so only use it if we * really want to. */ - if (goal->offset && - (goal->iu || goal->dt || goal->qas || (goal->period < 0xa))) { + if (goal->renego == NS_PPR || (goal->offset && + (goal->iu || goal->dt || goal->qas || (goal->period < 0xa)))) { nego = NS_PPR; - } else if (spi_width(starget) != goal->width) { + } else if (goal->renego == NS_WIDE || goal->width) { nego = NS_WIDE; - } else if (spi_period(starget) != goal->period || - spi_offset(starget) != goal->offset) { + } else if (goal->renego == NS_SYNC || goal->offset) { nego = NS_SYNC; } else { goal->check_nego = 0; @@ -2040,6 +2039,29 @@ static void sym_settrans(struct sym_hcb *np, int target, u_char opts, u_char ofs } } +static void sym_announce_transfer_rate(struct sym_tcb *tp) +{ + struct scsi_target *starget = tp->starget; + + if (tp->tprint.period != spi_period(starget) || + tp->tprint.offset != spi_offset(starget) || + tp->tprint.width != spi_width(starget) || + tp->tprint.iu != spi_iu(starget) || + tp->tprint.dt != spi_dt(starget) || + tp->tprint.qas != spi_qas(starget) || + !tp->tprint.check_nego) { + tp->tprint.period = spi_period(starget); + tp->tprint.offset = spi_offset(starget); + tp->tprint.width = spi_width(starget); + tp->tprint.iu = spi_iu(starget); + tp->tprint.dt = spi_dt(starget); + tp->tprint.qas = spi_qas(starget); + tp->tprint.check_nego = 1; + + spi_display_xfer_agreement(starget); + } +} + /* * We received a WDTR. * Let everything be aware of the changes. @@ -2049,11 +2071,13 @@ static void sym_setwide(struct sym_hcb *np, int target, u_char wide) struct sym_tcb *tp = &np->target[target]; struct scsi_target *starget = tp->starget; - if (spi_width(starget) == wide) - return; - sym_settrans(np, target, 0, 0, 0, wide, 0, 0); + if (wide) + tp->tgoal.renego = NS_WIDE; + else + tp->tgoal.renego = 0; + tp->tgoal.check_nego = 0; tp->tgoal.width = wide; spi_offset(starget) = 0; spi_period(starget) = 0; @@ -2063,7 +2087,7 @@ static void sym_setwide(struct sym_hcb *np, int target, u_char wide) spi_qas(starget) = 0; if (sym_verbose >= 3) - spi_display_xfer_agreement(starget); + sym_announce_transfer_rate(tp); } /* @@ -2080,6 +2104,12 @@ sym_setsync(struct sym_hcb *np, int target, sym_settrans(np, target, 0, ofs, per, wide, div, fak); + if (wide) + tp->tgoal.renego = NS_WIDE; + else if (ofs) + tp->tgoal.renego = NS_SYNC; + else + tp->tgoal.renego = 0; spi_period(starget) = per; spi_offset(starget) = ofs; spi_iu(starget) = spi_dt(starget) = spi_qas(starget) = 0; @@ -2090,7 +2120,7 @@ sym_setsync(struct sym_hcb *np, int target, tp->tgoal.check_nego = 0; } - spi_display_xfer_agreement(starget); + sym_announce_transfer_rate(tp); } /* @@ -2106,6 +2136,10 @@ sym_setpprot(struct sym_hcb *np, int target, u_char opts, u_char ofs, sym_settrans(np, target, opts, ofs, per, wide, div, fak); + if (wide || ofs) + tp->tgoal.renego = NS_PPR; + else + tp->tgoal.renego = 0; spi_width(starget) = tp->tgoal.width = wide; spi_period(starget) = tp->tgoal.period = per; spi_offset(starget) = tp->tgoal.offset = ofs; @@ -2114,7 +2148,7 @@ sym_setpprot(struct sym_hcb *np, int target, u_char opts, u_char ofs, spi_qas(starget) = tp->tgoal.qas = !!(opts & PPR_OPT_QAS); tp->tgoal.check_nego = 0; - spi_display_xfer_agreement(starget); + sym_announce_transfer_rate(tp); } /* @@ -3516,6 +3550,7 @@ static void sym_sir_task_recovery(struct sym_hcb *np, int num) spi_dt(starget) = 0; spi_qas(starget) = 0; tp->tgoal.check_nego = 1; + tp->tgoal.renego = 0; } /* @@ -5135,9 +5170,14 @@ int sym_queue_scsiio(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb * /* * Build a negotiation message if needed. * (nego_status is filled by sym_prepare_nego()) + * + * Always negotiate on INQUIRY and REQUEST SENSE. + * */ cp->nego_status = 0; - if (tp->tgoal.check_nego && !tp->nego_cp && lp) { + if ((tp->tgoal.check_nego || + cmd->cmnd[0] == INQUIRY || cmd->cmnd[0] == REQUEST_SENSE) && + !tp->nego_cp && lp) { msglen += sym_prepare_nego(np, cp, msgptr + msglen); } diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h index ad078805e62..61d28fcfffb 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.h +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h @@ -354,6 +354,7 @@ struct sym_trans { unsigned int dt:1; unsigned int qas:1; unsigned int check_nego:1; + unsigned int renego:2; }; /* @@ -419,6 +420,9 @@ struct sym_tcb { /* Transfer goal */ struct sym_trans tgoal; + /* Last printed transfer speed */ + struct sym_trans tprint; + /* * Keep track of the CCB used for the negotiation in order * to ensure that only 1 negotiation is queued at a time. |