diff options
Diffstat (limited to 'drivers/scsi')
50 files changed, 1748 insertions, 10000 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 14fc7f39e83..a5f0aaaf0dd 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -179,7 +179,15 @@ config CHR_DEV_SCH say M here and read <file:Documentation/kbuild/modules.txt> and <file:Documentation/scsi/scsi.txt>. The module will be called ch.o. If unsure, say N. - + +config SCSI_ENCLOSURE + tristate "SCSI Enclosure Support" + depends on SCSI && ENCLOSURE_SERVICES + help + Enclosures are devices sitting on or in SCSI backplanes that + manage devices. If you have a disk cage, the chances are that + it has an enclosure device. Selecting this option will just allow + certain enclosure conditions to be reported and is not required. comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs" depends on SCSI @@ -350,17 +358,6 @@ config SGIWD93_SCSI If you have a Western Digital WD93 SCSI controller on an SGI MIPS system, say Y. Otherwise, say N. -config SCSI_DECNCR - tristate "DEC NCR53C94 Scsi Driver" - depends on MACH_DECSTATION && SCSI && TC - help - Say Y here to support the NCR53C94 SCSI controller chips on IOASIC - based TURBOchannel DECstations and TURBOchannel PMAZ-A cards. - -config SCSI_DECSII - tristate "DEC SII Scsi Driver" - depends on MACH_DECSTATION && SCSI && 32BIT - config BLK_DEV_3W_XXXX_RAID tristate "3ware 5/6/7/8xxx ATA-RAID support" depends on PCI && SCSI @@ -1263,17 +1260,6 @@ config SCSI_NCR53C8XX_NO_DISCONNECT not allow targets to disconnect is not reasonable if there is more than 1 device on a SCSI bus. The normal answer therefore is N. -config SCSI_MCA_53C9X - tristate "NCR MCA 53C9x SCSI support" - depends on MCA_LEGACY && SCSI && BROKEN_ON_SMP - help - Some MicroChannel machines, notably the NCR 35xx line, use a SCSI - controller based on the NCR 53C94. This driver will allow use of - the controller on the 3550, and very possibly others. - - To compile this driver as a module, choose M here: the - module will be called mca_53c9x. - config SCSI_PAS16 tristate "PAS16 SCSI support" depends on ISA && SCSI @@ -1600,45 +1586,6 @@ config GVP11_SCSI To compile this driver as a module, choose M here: the module will be called gvp11. -config CYBERSTORM_SCSI - tristate "CyberStorm SCSI support" - depends on ZORRO && SCSI - help - If you have an Amiga with an original (MkI) Phase5 Cyberstorm - accelerator board and the optional Cyberstorm SCSI controller, - answer Y. Otherwise, say N. - -config CYBERSTORMII_SCSI - tristate "CyberStorm Mk II SCSI support" - depends on ZORRO && SCSI - help - If you have an Amiga with a Phase5 Cyberstorm MkII accelerator board - and the optional Cyberstorm SCSI controller, say Y. Otherwise, - answer N. - -config BLZ2060_SCSI - tristate "Blizzard 2060 SCSI support" - depends on ZORRO && SCSI - help - If you have an Amiga with a Phase5 Blizzard 2060 accelerator board - and want to use the onboard SCSI controller, say Y. Otherwise, - answer N. - -config BLZ1230_SCSI - tristate "Blizzard 1230IV/1260 SCSI support" - depends on ZORRO && SCSI - help - If you have an Amiga 1200 with a Phase5 Blizzard 1230IV or Blizzard - 1260 accelerator, and the optional SCSI module, say Y. Otherwise, - say N. - -config FASTLANE_SCSI - tristate "Fastlane SCSI support" - depends on ZORRO && SCSI - help - If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use - one in the near future, say Y to this question. Otherwise, say N. - config SCSI_A4000T tristate "A4000T NCR53c710 SCSI support (EXPERIMENTAL)" depends on AMIGA && SCSI && EXPERIMENTAL @@ -1666,15 +1613,6 @@ config SCSI_ZORRO7XX accelerator card for the Amiga 1200, - the SCSI controller on the GVP Turbo 040/060 accelerator. -config OKTAGON_SCSI - tristate "BSC Oktagon SCSI support (EXPERIMENTAL)" - depends on ZORRO && SCSI && EXPERIMENTAL - help - If you have the BSC Oktagon SCSI disk controller for the Amiga, say - Y to this question. If you're in doubt about whether you have one, - see the picture at - <http://amiga.resource.cx/exp/search.pl?product=oktagon>. - config ATARI_SCSI tristate "Atari native SCSI support" depends on ATARI && SCSI @@ -1727,18 +1665,6 @@ config MAC_SCSI SCSI-HOWTO, available from <http://www.tldp.org/docs.html#howto>. -config SCSI_MAC_ESP - tristate "Macintosh NCR53c9[46] SCSI" - depends on MAC && SCSI - help - This is the NCR 53c9x SCSI controller found on most of the 68040 - based Macintoshes. If you have one of these say Y and read the - SCSI-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here: the - module will be called mac_esp. - config MVME147_SCSI bool "WD33C93 SCSI driver for MVME147" depends on MVME147 && SCSI=y @@ -1779,6 +1705,7 @@ config SUN3_SCSI config SUN3X_ESP bool "Sun3x ESP SCSI" depends on SUN3X && SCSI=y + select SCSI_SPI_ATTRS help The ESP was an on-board SCSI controller used on Sun 3/80 machines. Say Y here to compile in support for it. diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 93e1428d03f..925c26b4fff 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -44,15 +44,8 @@ obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o obj-$(CONFIG_MVME147_SCSI) += mvme147.o wd33c93.o obj-$(CONFIG_SGIWD93_SCSI) += sgiwd93.o wd33c93.o -obj-$(CONFIG_CYBERSTORM_SCSI) += NCR53C9x.o cyberstorm.o -obj-$(CONFIG_CYBERSTORMII_SCSI) += NCR53C9x.o cyberstormII.o -obj-$(CONFIG_BLZ2060_SCSI) += NCR53C9x.o blz2060.o -obj-$(CONFIG_BLZ1230_SCSI) += NCR53C9x.o blz1230.o -obj-$(CONFIG_FASTLANE_SCSI) += NCR53C9x.o fastlane.o -obj-$(CONFIG_OKTAGON_SCSI) += NCR53C9x.o oktagon_esp_mod.o obj-$(CONFIG_ATARI_SCSI) += atari_scsi.o obj-$(CONFIG_MAC_SCSI) += mac_scsi.o -obj-$(CONFIG_SCSI_MAC_ESP) += mac_esp.o NCR53C9x.o obj-$(CONFIG_SUN3_SCSI) += sun3_scsi.o sun3_scsi_vme.o obj-$(CONFIG_MVME16x_SCSI) += 53c700.o mvme16x_scsi.o obj-$(CONFIG_BVME6000_SCSI) += 53c700.o bvme6000_scsi.o @@ -95,7 +88,6 @@ obj-$(CONFIG_SCSI_SYM53C8XX_2) += sym53c8xx_2/ obj-$(CONFIG_SCSI_ZALON) += zalon7xx.o obj-$(CONFIG_SCSI_EATA_PIO) += eata_pio.o obj-$(CONFIG_SCSI_7000FASST) += wd7000.o -obj-$(CONFIG_SCSI_MCA_53C9X) += NCR53C9x.o mca_53c9x.o obj-$(CONFIG_SCSI_IBMMCA) += ibmmca.o obj-$(CONFIG_SCSI_EATA) += eata.o obj-$(CONFIG_SCSI_DC395x) += dc395x.o @@ -112,13 +104,12 @@ obj-$(CONFIG_SCSI_QLOGICPTI) += qlogicpti.o obj-$(CONFIG_BLK_DEV_IDESCSI) += ide-scsi.o obj-$(CONFIG_SCSI_MESH) += mesh.o obj-$(CONFIG_SCSI_MAC53C94) += mac53c94.o -obj-$(CONFIG_SCSI_DECNCR) += NCR53C9x.o dec_esp.o obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o obj-$(CONFIG_SCSI_3W_9XXX) += 3w-9xxx.o obj-$(CONFIG_SCSI_PPA) += ppa.o obj-$(CONFIG_SCSI_IMM) += imm.o obj-$(CONFIG_JAZZ_ESP) += esp_scsi.o jazz_esp.o -obj-$(CONFIG_SUN3X_ESP) += NCR53C9x.o sun3x_esp.o +obj-$(CONFIG_SUN3X_ESP) += esp_scsi.o sun3x_esp.o obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o obj-$(CONFIG_SCSI_SNI_53C710) += 53c700.o sni_53c710.o obj-$(CONFIG_SCSI_NSP32) += nsp32.o @@ -138,6 +129,7 @@ obj-$(CONFIG_BLK_DEV_SD) += sd_mod.o obj-$(CONFIG_BLK_DEV_SR) += sr_mod.o obj-$(CONFIG_CHR_DEV_SG) += sg.o obj-$(CONFIG_CHR_DEV_SCH) += ch.o +obj-$(CONFIG_SCSI_ENCLOSURE) += ses.o # This goes last, so that "real" scsi devices probe earlier obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o diff --git a/drivers/scsi/NCR53C9x.c b/drivers/scsi/NCR53C9x.c deleted file mode 100644 index 5b0efc90391..00000000000 --- a/drivers/scsi/NCR53C9x.c +++ /dev/null @@ -1,3654 +0,0 @@ -/* NCR53C9x.c: Generic SCSI driver code for NCR53C9x chips. - * - * Originally esp.c : EnhancedScsiProcessor Sun SCSI driver code. - * - * Copyright (C) 1995, 1998 David S. Miller (davem@caip.rutgers.edu) - * - * Most DMA dependencies put in driver specific files by - * Jesper Skov (jskov@cygnus.co.uk) - * - * Set up to use esp_read/esp_write (preprocessor macros in NCR53c9x.h) by - * Tymm Twillman (tymm@coe.missouri.edu) - */ - -/* TODO: - * - * 1) Maybe disable parity checking in config register one for SCSI1 - * targets. (Gilmore says parity error on the SBus can lock up - * old sun4c's) - * 2) Add support for DMA2 pipelining. - * 3) Add tagged queueing. - * 4) Maybe change use of "esp" to something more "NCR"'ish. - */ - -#include <linux/module.h> - -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/blkdev.h> -#include <linux/interrupt.h> -#include <linux/proc_fs.h> -#include <linux/stat.h> -#include <linux/init.h> - -#include "scsi.h" -#include <scsi/scsi_host.h> -#include "NCR53C9x.h" - -#include <asm/system.h> -#include <asm/ptrace.h> -#include <asm/pgtable.h> -#include <asm/io.h> -#include <asm/irq.h> - -/* Command phase enumeration. */ -enum { - not_issued = 0x00, /* Still in the issue_SC queue. */ - - /* Various forms of selecting a target. */ -#define in_slct_mask 0x10 - in_slct_norm = 0x10, /* ESP is arbitrating, normal selection */ - in_slct_stop = 0x11, /* ESP will select, then stop with IRQ */ - in_slct_msg = 0x12, /* select, then send a message */ - in_slct_tag = 0x13, /* select and send tagged queue msg */ - in_slct_sneg = 0x14, /* select and acquire sync capabilities */ - - /* Any post selection activity. */ -#define in_phases_mask 0x20 - in_datain = 0x20, /* Data is transferring from the bus */ - in_dataout = 0x21, /* Data is transferring to the bus */ - in_data_done = 0x22, /* Last DMA data operation done (maybe) */ - in_msgin = 0x23, /* Eating message from target */ - in_msgincont = 0x24, /* Eating more msg bytes from target */ - in_msgindone = 0x25, /* Decide what to do with what we got */ - in_msgout = 0x26, /* Sending message to target */ - in_msgoutdone = 0x27, /* Done sending msg out */ - in_cmdbegin = 0x28, /* Sending cmd after abnormal selection */ - in_cmdend = 0x29, /* Done sending slow cmd */ - in_status = 0x2a, /* Was in status phase, finishing cmd */ - in_freeing = 0x2b, /* freeing the bus for cmd cmplt or disc */ - in_the_dark = 0x2c, /* Don't know what bus phase we are in */ - - /* Special states, ie. not normal bus transitions... */ -#define in_spec_mask 0x80 - in_abortone = 0x80, /* Aborting one command currently */ - in_abortall = 0x81, /* Blowing away all commands we have */ - in_resetdev = 0x82, /* SCSI target reset in progress */ - in_resetbus = 0x83, /* SCSI bus reset in progress */ - in_tgterror = 0x84, /* Target did something stupid */ -}; - -enum { - /* Zero has special meaning, see skipahead[12]. */ -/*0*/ do_never, - -/*1*/ do_phase_determine, -/*2*/ do_reset_bus, -/*3*/ do_reset_complete, -/*4*/ do_work_bus, -/*5*/ do_intr_end -}; - -/* The master ring of all esp hosts we are managing in this driver. */ -static struct NCR_ESP *espchain; -int nesps = 0, esps_in_use = 0, esps_running = 0; -EXPORT_SYMBOL(nesps); -EXPORT_SYMBOL(esps_running); - -irqreturn_t esp_intr(int irq, void *dev_id); - -/* Debugging routines */ -static struct esp_cmdstrings { - unchar cmdchar; - char *text; -} esp_cmd_strings[] = { - /* Miscellaneous */ - { ESP_CMD_NULL, "ESP_NOP", }, - { ESP_CMD_FLUSH, "FIFO_FLUSH", }, - { ESP_CMD_RC, "RSTESP", }, - { ESP_CMD_RS, "RSTSCSI", }, - /* Disconnected State Group */ - { ESP_CMD_RSEL, "RESLCTSEQ", }, - { ESP_CMD_SEL, "SLCTNATN", }, - { ESP_CMD_SELA, "SLCTATN", }, - { ESP_CMD_SELAS, "SLCTATNSTOP", }, - { ESP_CMD_ESEL, "ENSLCTRESEL", }, - { ESP_CMD_DSEL, "DISSELRESEL", }, - { ESP_CMD_SA3, "SLCTATN3", }, - { ESP_CMD_RSEL3, "RESLCTSEQ", }, - /* Target State Group */ - { ESP_CMD_SMSG, "SNDMSG", }, - { ESP_CMD_SSTAT, "SNDSTATUS", }, - { ESP_CMD_SDATA, "SNDDATA", }, - { ESP_CMD_DSEQ, "DISCSEQ", }, - { ESP_CMD_TSEQ, "TERMSEQ", }, - { ESP_CMD_TCCSEQ, "TRGTCMDCOMPSEQ", }, - { ESP_CMD_DCNCT, "DISC", }, - { ESP_CMD_RMSG, "RCVMSG", }, - { ESP_CMD_RCMD, "RCVCMD", }, - { ESP_CMD_RDATA, "RCVDATA", }, - { ESP_CMD_RCSEQ, "RCVCMDSEQ", }, - /* Initiator State Group */ - { ESP_CMD_TI, "TRANSINFO", }, - { ESP_CMD_ICCSEQ, "INICMDSEQCOMP", }, - { ESP_CMD_MOK, "MSGACCEPTED", }, - { ESP_CMD_TPAD, "TPAD", }, - { ESP_CMD_SATN, "SATN", }, - { ESP_CMD_RATN, "RATN", }, -}; -#define NUM_ESP_COMMANDS ((sizeof(esp_cmd_strings)) / (sizeof(struct esp_cmdstrings))) - -/* Print textual representation of an ESP command */ -static inline void esp_print_cmd(unchar espcmd) -{ - unchar dma_bit = espcmd & ESP_CMD_DMA; - int i; - - espcmd &= ~dma_bit; - for(i=0; i<NUM_ESP_COMMANDS; i++) - if(esp_cmd_strings[i].cmdchar == espcmd) - break; - if(i==NUM_ESP_COMMANDS) - printk("ESP_Unknown"); - else - printk("%s%s", esp_cmd_strings[i].text, - ((dma_bit) ? "+DMA" : "")); -} - -/* Print the status register's value */ -static inline void esp_print_statreg(unchar statreg) -{ - unchar phase; - - printk("STATUS<"); - phase = statreg & ESP_STAT_PMASK; - printk("%s,", (phase == ESP_DOP ? "DATA-OUT" : - (phase == ESP_DIP ? "DATA-IN" : - (phase == ESP_CMDP ? "COMMAND" : - (phase == ESP_STATP ? "STATUS" : - (phase == ESP_MOP ? "MSG-OUT" : - (phase == ESP_MIP ? "MSG_IN" : - "unknown"))))))); - if(statreg & ESP_STAT_TDONE) - printk("TRANS_DONE,"); - if(statreg & ESP_STAT_TCNT) - printk("TCOUNT_ZERO,"); - if(statreg & ESP_STAT_PERR) - printk("P_ERROR,"); - if(statreg & ESP_STAT_SPAM) - printk("SPAM,"); - if(statreg & ESP_STAT_INTR) - printk("IRQ,"); - printk(">"); -} - -/* Print the interrupt register's value */ -static inline void esp_print_ireg(unchar intreg) -{ - printk("INTREG< "); - if(intreg & ESP_INTR_S) - printk("SLCT_NATN "); - if(intreg & ESP_INTR_SATN) - printk("SLCT_ATN "); - if(intreg & ESP_INTR_RSEL) - printk("RSLCT "); - if(intreg & ESP_INTR_FDONE) - printk("FDONE "); - if(intreg & ESP_INTR_BSERV) - printk("BSERV "); - if(intreg & ESP_INTR_DC) - printk("DISCNCT "); - if(intreg & ESP_INTR_IC) - printk("ILL_CMD "); - if(intreg & ESP_INTR_SR) - printk("SCSI_BUS_RESET "); - printk(">"); -} - -/* Print the sequence step registers contents */ -static inline void esp_print_seqreg(unchar stepreg) -{ - stepreg &= ESP_STEP_VBITS; - printk("STEP<%s>", - (stepreg == ESP_STEP_ASEL ? "SLCT_ARB_CMPLT" : - (stepreg == ESP_STEP_SID ? "1BYTE_MSG_SENT" : - (stepreg == ESP_STEP_NCMD ? "NOT_IN_CMD_PHASE" : - (stepreg == ESP_STEP_PPC ? "CMD_BYTES_LOST" : - (stepreg == ESP_STEP_FINI4 ? "CMD_SENT_OK" : - "UNKNOWN")))))); -} - -static char *phase_string(int phase) -{ - switch(phase) { - case not_issued: - return "UNISSUED"; - case in_slct_norm: - return "SLCTNORM"; - case in_slct_stop: - return "SLCTSTOP"; - case in_slct_msg: - return "SLCTMSG"; - case in_slct_tag: - return "SLCTTAG"; - case in_slct_sneg: - return "SLCTSNEG"; - case in_datain: - return "DATAIN"; - case in_dataout: - return "DATAOUT"; - case in_data_done: - return "DATADONE"; - case in_msgin: - return "MSGIN"; - case in_msgincont: - return "MSGINCONT"; - case in_msgindone: - return "MSGINDONE"; - case in_msgout: - return "MSGOUT"; - case in_msgoutdone: - return "MSGOUTDONE"; - case in_cmdbegin: - return "CMDBEGIN"; - case in_cmdend: - return "CMDEND"; - case in_status: - return "STATUS"; - case in_freeing: - return "FREEING"; - case in_the_dark: - return "CLUELESS"; - case in_abortone: - return "ABORTONE"; - case in_abortall: - return "ABORTALL"; - case in_resetdev: - return "RESETDEV"; - case in_resetbus: - return "RESETBUS"; - case in_tgterror: - return "TGTERROR"; - default: - return "UNKNOWN"; - }; -} - -#ifdef DEBUG_STATE_MACHINE -static inline void esp_advance_phase(Scsi_Cmnd *s, int newphase) -{ - ESPLOG(("<%s>", phase_string(newphase))); - s->SCp.sent_command = s->SCp.phase; - s->SCp.phase = newphase; -} -#else -#define esp_advance_phase(__s, __newphase) \ - (__s)->SCp.sent_command = (__s)->SCp.phase; \ - (__s)->SCp.phase = (__newphase); -#endif - -#ifdef DEBUG_ESP_CMDS -static inline void esp_cmd(struct NCR_ESP *esp, struct ESP_regs *eregs, - unchar cmd) -{ - esp->espcmdlog[esp->espcmdent] = cmd; - esp->espcmdent = (esp->espcmdent + 1) & 31; - esp_write(eregs->esp_cmnd, cmd); -} -#else -#define esp_cmd(__esp, __eregs, __cmd) esp_write((__eregs)->esp_cmnd, (__cmd)) -#endif - -/* How we use the various Linux SCSI data structures for operation. - * - * struct scsi_cmnd: - * - * We keep track of the syncronous capabilities of a target - * in the device member, using sync_min_period and - * sync_max_offset. These are the values we directly write - * into the ESP registers while running a command. If offset - * is zero the ESP will use asynchronous transfers. - * If the borken flag is set we assume we shouldn't even bother - * trying to negotiate for synchronous transfer as this target - * is really stupid. If we notice the target is dropping the - * bus, and we have been allowing it to disconnect, we clear - * the disconnect flag. - */ - -/* Manipulation of the ESP command queues. Thanks to the aha152x driver - * and its author, Juergen E. Fischer, for the methods used here. - * Note that these are per-ESP queues, not global queues like - * the aha152x driver uses. - */ -static inline void append_SC(Scsi_Cmnd **SC, Scsi_Cmnd *new_SC) -{ - Scsi_Cmnd *end; - - new_SC->host_scribble = (unsigned char *) NULL; - if(!*SC) - *SC = new_SC; - else { - for(end=*SC;end->host_scribble;end=(Scsi_Cmnd *)end->host_scribble) - ; - end->host_scribble = (unsigned char *) new_SC; - } -} - -static inline void prepend_SC(Scsi_Cmnd **SC, Scsi_Cmnd *new_SC) -{ - new_SC->host_scribble = (unsigned char *) *SC; - *SC = new_SC; -} - -static inline Scsi_Cmnd *remove_first_SC(Scsi_Cmnd **SC) -{ - Scsi_Cmnd *ptr; - - ptr = *SC; - if(ptr) - *SC = (Scsi_Cmnd *) (*SC)->host_scribble; - return ptr; -} - -static inline Scsi_Cmnd *remove_SC(Scsi_Cmnd **SC, int target, int lun) -{ - Scsi_Cmnd *ptr, *prev; - - for(ptr = *SC, prev = NULL; - ptr && ((ptr->device->id != target) || (ptr->device->lun != lun)); - prev = ptr, ptr = (Scsi_Cmnd *) ptr->host_scribble) - ; - if(ptr) { - if(prev) - prev->host_scribble=ptr->host_scribble; - else - *SC=(Scsi_Cmnd *)ptr->host_scribble; - } - return ptr; -} - -/* Resetting various pieces of the ESP scsi driver chipset */ - -/* Reset the ESP chip, _not_ the SCSI bus. */ -static void esp_reset_esp(struct NCR_ESP *esp, struct ESP_regs *eregs) -{ - int family_code, version, i; - volatile int trash; - - /* Now reset the ESP chip */ - esp_cmd(esp, eregs, ESP_CMD_RC); - esp_cmd(esp, eregs, ESP_CMD_NULL | ESP_CMD_DMA); - if(esp->erev == fast) - esp_write(eregs->esp_cfg2, ESP_CONFIG2_FENAB); - esp_cmd(esp, eregs, ESP_CMD_NULL | ESP_CMD_DMA); - - /* This is the only point at which it is reliable to read - * the ID-code for a fast ESP chip variant. - */ - esp->max_period = ((35 * esp->ccycle) / 1000); - if(esp->erev == fast) { - char *erev2string[] = { - "Emulex FAS236", - "Emulex FPESP100A", - "fast", - "QLogic FAS366", - "Emulex FAS216", - "Symbios Logic 53CF9x-2", - "unknown!" - }; - - version = esp_read(eregs->esp_uid); - family_code = (version & 0xf8) >> 3; - if(family_code == 0x02) { - if ((version & 7) == 2) - esp->erev = fas216; - else - esp->erev = fas236; - } else if(family_code == 0x0a) - esp->erev = fas366; /* Version is usually '5'. */ - else if(family_code == 0x00) { - if ((version & 7) == 2) - esp->erev = fas100a; /* NCR53C9X */ - else - esp->erev = espunknown; - } else if(family_code == 0x14) { - if ((version & 7) == 2) - esp->erev = fsc; - else - esp->erev = espunknown; - } else if(family_code == 0x00) { - if ((version & 7) == 2) - esp->erev = fas100a; /* NCR53C9X */ - else - esp->erev = espunknown; - } else - esp->erev = espunknown; - ESPLOG(("esp%d: FAST chip is %s (family=%d, version=%d)\n", - esp->esp_id, erev2string[esp->erev - fas236], - family_code, (version & 7))); - - esp->min_period = ((4 * esp->ccycle) / 1000); - } else { - esp->min_period = ((5 * esp->ccycle) / 1000); - } - - /* Reload the configuration registers */ - esp_write(eregs->esp_cfact, esp->cfact); - esp->prev_stp = 0; - esp_write(eregs->esp_stp, 0); - esp->prev_soff = 0; - esp_write(eregs->esp_soff, 0); - esp_write(eregs->esp_timeo, esp->neg_defp); - esp->max_period = (esp->max_period + 3)>>2; - esp->min_period = (esp->min_period + 3)>>2; - - esp_write(eregs->esp_cfg1, esp->config1); - switch(esp->erev) { - case esp100: - /* nothing to do */ - break; - case esp100a: - esp_write(eregs->esp_cfg2, esp->config2); - break; - case esp236: - /* Slow 236 */ - esp_write(eregs->esp_cfg2, esp->config2); - esp->prev_cfg3 = esp->config3[0]; - esp_write(eregs->esp_cfg3, esp->prev_cfg3); - break; - case fas366: - panic("esp: FAS366 support not present, please notify " - "jongk@cs.utwente.nl"); - break; - case fas216: - case fas236: - case fsc: - /* Fast ESP variants */ - esp_write(eregs->esp_cfg2, esp->config2); - for(i=0; i<8; i++) - esp->config3[i] |= ESP_CONFIG3_FCLK; - esp->prev_cfg3 = esp->config3[0]; - esp_write(eregs->esp_cfg3, esp->prev_cfg3); - if(esp->diff) - esp->radelay = 0; - else - esp->radelay = 16; - /* Different timeout constant for these chips */ - esp->neg_defp = - FSC_NEG_DEFP(esp->cfreq, - (esp->cfact == ESP_CCF_F0 ? - ESP_CCF_F7 + 1 : esp->cfact)); - esp_write(eregs->esp_timeo, esp->neg_defp); - /* Enable Active Negotiation if possible */ - if((esp->erev == fsc) && !esp->diff) - esp_write(eregs->esp_cfg4, ESP_CONFIG4_EAN); - break; - case fas100a: - /* Fast 100a */ - esp_write(eregs->esp_cfg2, esp->config2); - for(i=0; i<8; i++) - esp->config3[i] |= ESP_CONFIG3_FCLOCK; - esp->prev_cfg3 = esp->config3[0]; - esp_write(eregs->esp_cfg3, esp->prev_cfg3); - esp->radelay = 32; - break; - default: - panic("esp: what could it be... I wonder..."); - break; - }; - - /* Eat any bitrot in the chip */ - trash = esp_read(eregs->esp_intrpt); - udelay(100); -} - -/* This places the ESP into a known state at boot time. */ -void esp_bootup_reset(struct NCR_ESP *esp, struct ESP_regs *eregs) -{ - volatile unchar trash; - - /* Reset the DMA */ - if(esp->dma_reset) - esp->dma_reset(esp); - - /* Reset the ESP */ - esp_reset_esp(esp, eregs); - - /* Reset the SCSI bus, but tell ESP not to generate an irq */ - esp_write(eregs->esp_cfg1, (esp_read(eregs->esp_cfg1) | ESP_CONFIG1_SRRDISAB)); - esp_cmd(esp, eregs, ESP_CMD_RS); - udelay(400); - esp_write(eregs->esp_cfg1, esp->config1); - - /* Eat any bitrot in the chip and we are done... */ - trash = esp_read(eregs->esp_intrpt); -} -EXPORT_SYMBOL(esp_bootup_reset); - -/* Allocate structure and insert basic data such as SCSI chip frequency - * data and a pointer to the device - */ -struct NCR_ESP* esp_allocate(struct scsi_host_template *tpnt, void *esp_dev, - int hotplug) -{ - struct NCR_ESP *esp, *elink; - struct Scsi_Host *esp_host; - - if (hotplug) - esp_host = scsi_host_alloc(tpnt, sizeof(struct NCR_ESP)); - else - esp_host = scsi_register(tpnt, sizeof(struct NCR_ESP)); - if(!esp_host) - panic("Cannot register ESP SCSI host"); - esp = (struct NCR_ESP *) esp_host->hostdata; - if(!esp) - panic("No esp in hostdata"); - esp->ehost = esp_host; - esp->edev = esp_dev; - esp->esp_id = nesps++; - - /* Set bitshift value (only used on Amiga with multiple ESPs) */ - esp->shift = 2; - - /* Put into the chain of esp chips detected */ - if(espchain) { - elink = espchain; - while(elink->next) elink = elink->next; - elink->next = esp; - } else { - espchain = esp; - } - esp->next = NULL; - - return esp; -} - -void esp_deallocate(struct NCR_ESP *esp) -{ - struct NCR_ESP *elink; - - if(espchain == esp) { - espchain = NULL; - } else { - for(elink = espchain; elink && (elink->next != esp); elink = elink->next); - if(elink) - elink->next = esp->next; - } - nesps--; -} - -/* Complete initialization of ESP structure and device - * Caller must have initialized appropriate parts of the ESP structure - * between the call to esp_allocate and this function. - */ -void esp_initialize(struct NCR_ESP *esp) -{ - struct ESP_regs *eregs = esp->eregs; - unsigned int fmhz; - unchar ccf; - int i; - - /* Check out the clock properties of the chip. */ - - /* This is getting messy but it has to be done - * correctly or else you get weird behavior all - * over the place. We are trying to basically - * figure out three pieces of information. - * - * a) Clock Conversion Factor - * - * This is a representation of the input - * crystal clock frequency going into the - * ESP on this machine. Any operation whose - * timing is longer than 400ns depends on this - * value being correct. For example, you'll - * get blips for arbitration/selection during - * high load or with multiple targets if this - * is not set correctly. - * - * b) Selection Time-Out - * - * The ESP isn't very bright and will arbitrate - * for the bus and try to select a target - * forever if you let it. This value tells - * the ESP when it has taken too long to - * negotiate and that it should interrupt - * the CPU so we can see what happened. - * The value is computed as follows (from - * NCR/Symbios chip docs). - * - * (Time Out Period) * (Input Clock) - * STO = ---------------------------------- - * (8192) * (Clock Conversion Factor) - * - * You usually want the time out period to be - * around 250ms, I think we'll set it a little - * bit higher to account for fully loaded SCSI - * bus's and slow devices that don't respond so - * quickly to selection attempts. (yeah, I know - * this is out of spec. but there is a lot of - * buggy pieces of firmware out there so bite me) - * - * c) Imperical constants for synchronous offset - * and transfer period register values - * - * This entails the smallest and largest sync - * period we could ever handle on this ESP. - */ - - fmhz = esp->cfreq; - - if(fmhz <= (5000000)) - ccf = 0; - else - ccf = (((5000000 - 1) + (fmhz))/(5000000)); - if(!ccf || ccf > 8) { - /* If we can't find anything reasonable, - * just assume 20MHZ. This is the clock - * frequency of the older sun4c's where I've - * been unable to find the clock-frequency - * PROM property. All other machines provide - * useful values it seems. - */ - ccf = ESP_CCF_F4; - fmhz = (20000000); - } - if(ccf==(ESP_CCF_F7+1)) - esp->cfact = ESP_CCF_F0; - else if(ccf == ESP_CCF_NEVER) - esp->cfact = ESP_CCF_F2; - else - esp->cfact = ccf; - esp->cfreq = fmhz; - esp->ccycle = ESP_MHZ_TO_CYCLE(fmhz); - esp->ctick = ESP_TICK(ccf, esp->ccycle); - esp->neg_defp = ESP_NEG_DEFP(fmhz, ccf); - esp->sync_defp = SYNC_DEFP_SLOW; - - printk("SCSI ID %d Clk %dMHz CCF=%d TOut %d ", - esp->scsi_id, (esp->cfreq / 1000000), - ccf, (int) esp->neg_defp); - - /* Fill in ehost data */ - esp->ehost->base = (unsigned long)eregs; - esp->ehost->this_id = esp->scsi_id; - esp->ehost->irq = esp->irq; - - /* SCSI id mask */ - esp->scsi_id_mask = (1 << esp->scsi_id); - - /* Probe the revision of this esp */ - esp->config1 = (ESP_CONFIG1_PENABLE | (esp->scsi_id & 7)); - esp->config2 = (ESP_CONFIG2_SCSI2ENAB | ESP_CONFIG2_REGPARITY); - esp_write(eregs->esp_cfg2, esp->config2); - if((esp_read(eregs->esp_cfg2) & ~(ESP_CONFIG2_MAGIC)) != - (ESP_CONFIG2_SCSI2ENAB | ESP_CONFIG2_REGPARITY)) { - printk("NCR53C90(esp100)\n"); - esp->erev = esp100; - } else { - esp->config2 = 0; - esp_write(eregs->esp_cfg2, 0); - esp_write(eregs->esp_cfg3, 5); - if(esp_read(eregs->esp_cfg3) != 5) { - printk("NCR53C90A(esp100a)\n"); - esp->erev = esp100a; - } else { - int target; - - for(target=0; target<8; target++) - esp->config3[target] = 0; - esp->prev_cfg3 = 0; - esp_write(eregs->esp_cfg3, 0); - if(ccf > ESP_CCF_F5) { - printk("NCR53C9XF(espfast)\n"); - esp->erev = fast; - esp->sync_defp = SYNC_DEFP_FAST; - } else { - printk("NCR53C9x(esp236)\n"); - esp->erev = esp236; - } - } - } - - /* Initialize the command queues */ - esp->current_SC = NULL; - esp->disconnected_SC = NULL; - esp->issue_SC = NULL; - - /* Clear the state machines. */ - esp->targets_present = 0; - esp->resetting_bus = 0; - esp->snip = 0; - - init_waitqueue_head(&esp->reset_queue); - - esp->fas_premature_intr_workaround = 0; - for(i = 0; i < 32; i++) - esp->espcmdlog[i] = 0; - esp->espcmdent = 0; - for(i = 0; i < 16; i++) { - esp->cur_msgout[i] = 0; - esp->cur_msgin[i] = 0; - } - esp->prevmsgout = esp->prevmsgin = 0; - esp->msgout_len = esp->msgin_len = 0; - - /* Clear the one behind caches to hold unmatchable values. */ - esp->prev_soff = esp->prev_stp = esp->prev_cfg3 = 0xff; - - /* Reset the thing before we try anything... */ - esp_bootup_reset(esp, eregs); - - esps_in_use++; -} - -/* The info function will return whatever useful - * information the developer sees fit. If not provided, then - * the name field will be used instead. - */ -const char *esp_info(struct Scsi_Host *host) -{ - struct NCR_ESP *esp; - - esp = (struct NCR_ESP *) host->hostdata; - switch(esp->erev) { - case esp100: - return "ESP100 (NCR53C90)"; - case esp100a: - return "ESP100A (NCR53C90A)"; - case esp236: - return "ESP236 (NCR53C9x)"; - case fas216: - return "Emulex FAS216"; - case fas236: - return "Emulex FAS236"; - case fas366: - return "QLogic FAS366"; - case fas100a: - return "FPESP100A"; - case fsc: - return "Symbios Logic 53CF9x-2"; - default: - panic("Bogon ESP revision"); - }; -} -EXPORT_SYMBOL(esp_info); - -/* From Wolfgang Stanglmeier's NCR scsi driver. */ -struct info_str -{ - char *buffer; - int length; - int offset; - int pos; -}; - -static void copy_mem_info(struct info_str *info, char *data, int len) -{ - if (info->pos + len > info->length) - len = info->length - info->pos; - - if (info->pos + len < info->offset) { - info->pos += len; - return; - } - if (info->pos < info->offset) { - data += (info->offset - info->pos); - len -= (info->offset - info->pos); - } - - if (len > 0) { - memcpy(info->buffer + info->pos, data, len); - info->pos += len; - } -} - -static int copy_info(struct info_str *info, char *fmt, ...) -{ - va_list args; - char buf[81]; - int len; - - va_start(args, fmt); - len = vsprintf(buf, fmt, args); - va_end(args); - - copy_mem_info(info, buf, len); - return len; -} - -static int esp_host_info(struct NCR_ESP *esp, char *ptr, off_t offset, int len) -{ - struct scsi_device *sdev; - struct info_str info; - int i; - - info.buffer = ptr; - info.length = len; - info.offset = offset; - info.pos = 0; - - copy_info(&info, "ESP Host Adapter:\n"); - copy_info(&info, "\tESP Model\t\t"); - switch(esp->erev) { - case esp100: - copy_info(&info, "ESP100 (NCR53C90)\n"); - break; - case esp100a: - copy_info(&info, "ESP100A (NCR53C90A)\n"); - break; - case esp236: - copy_info(&info, "ESP236 (NCR53C9x)\n"); - break; - case fas216: - copy_info(&info, "Emulex FAS216\n"); - break; - case fas236: - copy_info(&info, "Emulex FAS236\n"); - break; - case fas100a: - copy_info(&info, "FPESP100A\n"); - break; - case fast: - copy_info(&info, "Generic FAST\n"); - break; - case fas366: - copy_info(&info, "QLogic FAS366\n"); - break; - case fsc: - copy_info(&info, "Symbios Logic 53C9x-2\n"); - break; - case espunknown: - default: - copy_info(&info, "Unknown!\n"); - break; - }; - copy_info(&info, "\tLive Targets\t\t[ "); - for(i = 0; i < 15; i++) { - if(esp->targets_present & (1 << i)) - copy_info(&info, "%d ", i); - } - copy_info(&info, "]\n\n"); - - /* Now describe the state of each existing target. */ - copy_info(&info, "Target #\tconfig3\t\tSync Capabilities\tDisconnect\n"); - - shost_for_each_device(sdev, esp->ehost) { - struct esp_device *esp_dev = sdev->hostdata; - uint id = sdev->id; - - if (!(esp->targets_present & (1 << id))) - continue; - - copy_info(&info, "%d\t\t", id); - copy_info(&info, "%08lx\t", esp->config3[id]); - copy_info(&info, "[%02lx,%02lx]\t\t\t", - esp_dev->sync_max_offset, - esp_dev->sync_min_period); - copy_info(&info, "%s\n", esp_dev->disconnect ? "yes" : "no"); - } - - return info.pos > info.offset? info.pos - info.offset : 0; -} - -/* ESP proc filesystem code. */ -int esp_proc_info(struct Scsi_Host *shost, char *buffer, char **start, off_t offset, int length, - int inout) -{ - struct NCR_ESP *esp = (struct NCR_ESP *)shost->hostdata; - - if(inout) - return -EINVAL; /* not yet */ - if(start) - *start = buffer; - return esp_host_info(esp, buffer, offset, length); -} -EXPORT_SYMBOL(esp_proc_info); - -static void esp_get_dmabufs(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - if(sp->use_sg == 0) { - sp->SCp.this_residual = sp->request_bufflen; - sp->SCp.buffer = (struct scatterlist *) sp->request_buffer; - sp->SCp.buffers_residual = 0; - if (esp->dma_mmu_get_scsi_one) - esp->dma_mmu_get_scsi_one(esp, sp); - else - sp->SCp.ptr = - (char *) virt_to_phys(sp->request_buffer); - } else { - sp->SCp.buffer = (struct scatterlist *) sp->request_buffer; - sp->SCp.buffers_residual = sp->use_sg - 1; - sp->SCp.this_residual = sp->SCp.buffer->length; - if (esp->dma_mmu_get_scsi_sgl) - esp->dma_mmu_get_scsi_sgl(esp, sp); - else - sp->SCp.ptr = - (char *) virt_to_phys(sg_virt(sp->SCp.buffer)); - } -} - -static void esp_release_dmabufs(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - if(sp->use_sg == 0) { - if (esp->dma_mmu_release_scsi_one) - esp->dma_mmu_release_scsi_one(esp, sp); - } else { - if (esp->dma_mmu_release_scsi_sgl) - esp->dma_mmu_release_scsi_sgl(esp, sp); - } -} - -static void esp_restore_pointers(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - struct esp_pointers *ep = &esp->data_pointers[scmd_id(sp)]; - - sp->SCp.ptr = ep->saved_ptr; - sp->SCp.buffer = ep->saved_buffer; - sp->SCp.this_residual = ep->saved_this_residual; - sp->SCp.buffers_residual = ep->saved_buffers_residual; -} - -static void esp_save_pointers(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - struct esp_pointers *ep = &esp->data_pointers[scmd_id(sp)]; - - ep->saved_ptr = sp->SCp.ptr; - ep->saved_buffer = sp->SCp.buffer; - ep->saved_this_residual = sp->SCp.this_residual; - ep->saved_buffers_residual = sp->SCp.buffers_residual; -} - -/* Some rules: - * - * 1) Never ever panic while something is live on the bus. - * If there is to be any chance of syncing the disks this - * rule is to be obeyed. - * - * 2) Any target that causes a foul condition will no longer - * have synchronous transfers done to it, no questions - * asked. - * - * 3) Keep register accesses to a minimum. Think about some - * day when we have Xbus machines this is running on and - * the ESP chip is on the other end of the machine on a - * different board from the cpu where this is running. - */ - -/* Fire off a command. We assume the bus is free and that the only - * case where we could see an interrupt is where we have disconnected - * commands active and they are trying to reselect us. - */ -static inline void esp_check_cmd(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - switch(sp->cmd_len) { - case 6: - case 10: - case 12: - esp->esp_slowcmd = 0; - break; - - default: - esp->esp_slowcmd = 1; - esp->esp_scmdleft = sp->cmd_len; - esp->esp_scmdp = &sp->cmnd[0]; - break; - }; -} - -static inline void build_sync_nego_msg(struct NCR_ESP *esp, int period, int offset) -{ - esp->cur_msgout[0] = EXTENDED_MESSAGE; - esp->cur_msgout[1] = 3; - esp->cur_msgout[2] = EXTENDED_SDTR; - esp->cur_msgout[3] = period; - esp->cur_msgout[4] = offset; - esp->msgout_len = 5; -} - -static void esp_exec_cmd(struct NCR_ESP *esp) -{ - struct ESP_regs *eregs = esp->eregs; - struct esp_device *esp_dev; - Scsi_Cmnd *SCptr; - struct scsi_device *SDptr; - volatile unchar *cmdp = esp->esp_command; - unsigned char the_esp_command; - int lun, target; - int i; - - /* Hold off if we have disconnected commands and - * an IRQ is showing... - */ - if(esp->disconnected_SC && esp->dma_irq_p(esp)) - return; - - /* Grab first member of the issue queue. */ - SCptr = esp->current_SC = remove_first_SC(&esp->issue_SC); - - /* Safe to panic here because current_SC is null. */ - if(!SCptr) - panic("esp: esp_exec_cmd and issue queue is NULL"); - - SDptr = SCptr->device; - esp_dev = SDptr->hostdata; - lun = SCptr->device->lun; - target = SCptr->device->id; - - esp->snip = 0; - esp->msgout_len = 0; - - /* Send it out whole, or piece by piece? The ESP - * only knows how to automatically send out 6, 10, - * and 12 byte commands. I used to think that the - * Linux SCSI code would never throw anything other - * than that to us, but then again there is the - * SCSI generic driver which can send us anything. - */ - esp_check_cmd(esp, SCptr); - - /* If arbitration/selection is successful, the ESP will leave - * ATN asserted, causing the target to go into message out - * phase. The ESP will feed the target the identify and then - * the target can only legally go to one of command, - * datain/out, status, or message in phase, or stay in message - * out phase (should we be trying to send a sync negotiation - * message after the identify). It is not allowed to drop - * BSY, but some buggy targets do and we check for this - * condition in the selection complete code. Most of the time - * we'll make the command bytes available to the ESP and it - * will not interrupt us until it finishes command phase, we - * cannot do this for command sizes the ESP does not - * understand and in this case we'll get interrupted right - * when the target goes into command phase. - * - * It is absolutely _illegal_ in the presence of SCSI-2 devices - * to use the ESP select w/o ATN command. When SCSI-2 devices are - * present on the bus we _must_ always go straight to message out - * phase with an identify message for the target. Being that - * selection attempts in SCSI-1 w/o ATN was an option, doing SCSI-2 - * selections should not confuse SCSI-1 we hope. - */ - - if(esp_dev->sync) { - /* this targets sync is known */ -#ifdef CONFIG_SCSI_MAC_ESP -do_sync_known: -#endif - if(esp_dev->disconnect) - *cmdp++ = IDENTIFY(1, lun); - else - *cmdp++ = IDENTIFY(0, lun); - - if(esp->esp_slowcmd) { - the_esp_command = (ESP_CMD_SELAS | ESP_CMD_DMA); - esp_advance_phase(SCptr, in_slct_stop); - } else { - the_esp_command = (ESP_CMD_SELA | ESP_CMD_DMA); - esp_advance_phase(SCptr, in_slct_norm); - } - } else if(!(esp->targets_present & (1<<target)) || !(esp_dev->disconnect)) { - /* After the bootup SCSI code sends both the - * TEST_UNIT_READY and INQUIRY commands we want - * to at least attempt allowing the device to - * disconnect. - */ - ESPMISC(("esp: Selecting device for first time. target=%d " - "lun=%d\n", target, SCptr->device->lun)); - if(!SDptr->borken && !esp_dev->disconnect) - esp_dev->disconnect = 1; - - *cmdp++ = IDENTIFY(0, lun); - esp->prevmsgout = NOP; - esp_advance_phase(SCptr, in_slct_norm); - the_esp_command = (ESP_CMD_SELA | ESP_CMD_DMA); - - /* Take no chances... */ - esp_dev->sync_max_offset = 0; - esp_dev->sync_min_period = 0; - } else { - int toshiba_cdrom_hwbug_wkaround = 0; - -#ifdef CONFIG_SCSI_MAC_ESP - /* Never allow synchronous transfers (disconnect OK) on - * Macintosh. Well, maybe later when we figured out how to - * do DMA on the machines that support it ... - */ - esp_dev->disconnect = 1; - esp_dev->sync_max_offset = 0; - esp_dev->sync_min_period = 0; - esp_dev->sync = 1; - esp->snip = 0; - goto do_sync_known; -#endif - /* We've talked to this guy before, - * but never negotiated. Let's try - * sync negotiation. - */ - if(!SDptr->borken) { - if((SDptr->type == TYPE_ROM) && - (!strncmp(SDptr->vendor, "TOSHIBA", 7))) { - /* Nice try sucker... */ - ESPMISC(("esp%d: Disabling sync for buggy " - "Toshiba CDROM.\n", esp->esp_id)); - toshiba_cdrom_hwbug_wkaround = 1; - build_sync_nego_msg(esp, 0, 0); - } else { - build_sync_nego_msg(esp, esp->sync_defp, 15); - } - } else { - build_sync_nego_msg(esp, 0, 0); - } - esp_dev->sync = 1; - esp->snip = 1; - - /* A fix for broken SCSI1 targets, when they disconnect - * they lock up the bus and confuse ESP. So disallow - * disconnects for SCSI1 targets for now until we - * find a better fix. - * - * Addendum: This is funny, I figured out what was going - * on. The blotzed SCSI1 target would disconnect, - * one of the other SCSI2 targets or both would be - * disconnected as well. The SCSI1 target would - * stay disconnected long enough that we start - * up a command on one of the SCSI2 targets. As - * the ESP is arbitrating for the bus the SCSI1 - * target begins to arbitrate as well to reselect - * the ESP. The SCSI1 target refuses to drop it's - * ID bit on the data bus even though the ESP is - * at ID 7 and is the obvious winner for any - * arbitration. The ESP is a poor sport and refuses - * to lose arbitration, it will continue indefinitely - * trying to arbitrate for the bus and can only be - * stopped via a chip reset or SCSI bus reset. - * Therefore _no_ disconnects for SCSI1 targets - * thank you very much. ;-) - */ - if(((SDptr->scsi_level < 3) && (SDptr->type != TYPE_TAPE)) || - toshiba_cdrom_hwbug_wkaround || SDptr->borken) { - ESPMISC((KERN_INFO "esp%d: Disabling DISCONNECT for target %d " - "lun %d\n", esp->esp_id, SCptr->device->id, SCptr->device->lun)); - esp_dev->disconnect = 0; - *cmdp++ = IDENTIFY(0, lun); - } else { - *cmdp++ = IDENTIFY(1, lun); - } - - /* ESP fifo is only so big... - * Make this look like a slow command. - */ - esp->esp_slowcmd = 1; - esp->esp_scmdleft = SCptr->cmd_len; - esp->esp_scmdp = &SCptr->cmnd[0]; - - the_esp_command = (ESP_CMD_SELAS | ESP_CMD_DMA); - esp_advance_phase(SCptr, in_slct_msg); - } - - if(!esp->esp_slowcmd) - for(i = 0; i < SCptr->cmd_len; i++) - *cmdp++ = SCptr->cmnd[i]; - - esp_write(eregs->esp_busid, (target & 7)); - if (esp->prev_soff != esp_dev->sync_max_offset || - esp->prev_stp != esp_dev->sync_min_period || - (esp->erev > esp100a && - esp->prev_cfg3 != esp->config3[target])) { - esp->prev_soff = esp_dev->sync_max_offset; - esp_write(eregs->esp_soff, esp->prev_soff); - esp->prev_stp = esp_dev->sync_min_period; - esp_write(eregs->esp_stp, esp->prev_stp); - if(esp->erev > esp100a) { - esp->prev_cfg3 = esp->config3[target]; - esp_write(eregs->esp_cfg3, esp->prev_cfg3); - } - } - i = (cmdp - esp->esp_command); - - /* Set up the DMA and ESP counters */ - if(esp->do_pio_cmds){ - int j = 0; - - /* - * XXX MSch: - * - * It seems this is required, at least to clean up - * after failed commands when using PIO mode ... - */ - esp_cmd(esp, eregs, ESP_CMD_FLUSH); - - for(;j<i;j++) - esp_write(eregs->esp_fdata, esp->esp_command[j]); - the_esp_command &= ~ESP_CMD_DMA; - - /* Tell ESP to "go". */ - esp_cmd(esp, eregs, the_esp_command); - } else { - /* Set up the ESP counters */ - esp_write(eregs->esp_tclow, i); - esp_write(eregs->esp_tcmed, 0); - esp->dma_init_write(esp, esp->esp_command_dvma, i); - - /* Tell ESP to "go". */ - esp_cmd(esp, eregs, the_esp_command); - } -} - -/* Queue a SCSI command delivered from the mid-level Linux SCSI code. */ -int esp_queue(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *)) -{ - struct NCR_ESP *esp; - - /* Set up func ptr and initial driver cmd-phase. */ - SCpnt->scsi_done = done; - SCpnt->SCp.phase = not_issued; - - esp = (struct NCR_ESP *) SCpnt->device->host->hostdata; - - if(esp->dma_led_on) - esp->dma_led_on(esp); - - /* We use the scratch area. */ - ESPQUEUE(("esp_queue: target=%d lun=%d ", SCpnt->device->id, SCpnt->lun)); - ESPDISC(("N<%02x,%02x>", SCpnt->device->id, SCpnt->lun)); - - esp_get_dmabufs(esp, SCpnt); - esp_save_pointers(esp, SCpnt); /* FIXME for tag queueing */ - - SCpnt->SCp.Status = CHECK_CONDITION; - SCpnt->SCp.Message = 0xff; - SCpnt->SCp.sent_command = 0; - - /* Place into our queue. */ - if(SCpnt->cmnd[0] == REQUEST_SENSE) { - ESPQUEUE(("RQSENSE\n")); - prepend_SC(&esp->issue_SC, SCpnt); - } else { - ESPQUEUE(("\n")); - append_SC(&esp->issue_SC, SCpnt); - } - - /* Run it now if we can. */ - if(!esp->current_SC && !esp->resetting_bus) - esp_exec_cmd(esp); - - return 0; -} - -/* Dump driver state. */ -static void esp_dump_cmd(Scsi_Cmnd *SCptr) -{ - ESPLOG(("[tgt<%02x> lun<%02x> " - "pphase<%s> cphase<%s>]", - SCptr->device->id, SCptr->device->lun, - phase_string(SCptr->SCp.sent_command), - phase_string(SCptr->SCp.phase))); -} - -static void esp_dump_state(struct NCR_ESP *esp, - struct ESP_regs *eregs) -{ - Scsi_Cmnd *SCptr = esp->current_SC; -#ifdef DEBUG_ESP_CMDS - int i; -#endif - - ESPLOG(("esp%d: dumping state\n", esp->esp_id)); - - /* Print DMA status */ - esp->dma_dump_state(esp); - - ESPLOG(("esp%d: SW [sreg<%02x> sstep<%02x> ireg<%02x>]\n", - esp->esp_id, esp->sreg, esp->seqreg, esp->ireg)); - ESPLOG(("esp%d: HW reread [sreg<%02x> sstep<%02x> ireg<%02x>]\n", - esp->esp_id, esp_read(eregs->esp_status), esp_read(eregs->esp_sstep), - esp_read(eregs->esp_intrpt))); -#ifdef DEBUG_ESP_CMDS - printk("esp%d: last ESP cmds [", esp->esp_id); - i = (esp->espcmdent - 1) & 31; - printk("<"); - esp_print_cmd(esp->espcmdlog[i]); - printk(">"); - i = (i - 1) & 31; - printk("<"); - esp_print_cmd(esp->espcmdlog[i]); - printk(">"); - i = (i - 1) & 31; - printk("<"); - esp_print_cmd(esp->espcmdlog[i]); - printk(">"); - i = (i - 1) & 31; - printk("<"); - esp_print_cmd(esp->espcmdlog[i]); - printk(">"); - printk("]\n"); -#endif /* (DEBUG_ESP_CMDS) */ - - if(SCptr) { - ESPLOG(("esp%d: current command ", esp->esp_id)); - esp_dump_cmd(SCptr); - } - ESPLOG(("\n")); - SCptr = esp->disconnected_SC; - ESPLOG(("esp%d: disconnected ", esp->esp_id)); - while(SCptr) { - esp_dump_cmd(SCptr); - SCptr = (Scsi_Cmnd *) SCptr->host_scribble; - } - ESPLOG(("\n")); -} - -/* Abort a command. The host_lock is acquired by caller. */ -int esp_abort(Scsi_Cmnd *SCptr) -{ - struct NCR_ESP *esp = (struct NCR_ESP *) SCptr->device->host->hostdata; - struct ESP_regs *eregs = esp->eregs; - int don; - - ESPLOG(("esp%d: Aborting command\n", esp->esp_id)); - esp_dump_state(esp, eregs); - - /* Wheee, if this is the current command on the bus, the - * best we can do is assert ATN and wait for msgout phase. - * This should even fix a hung SCSI bus when we lose state - * in the driver and timeout because the eventual phase change - * will cause the ESP to (eventually) give an interrupt. - */ - if(esp->current_SC == SCptr) { - esp->cur_msgout[0] = ABORT; - esp->msgout_len = 1; - esp->msgout_ctr = 0; - esp_cmd(esp, eregs, ESP_CMD_SATN); - return SUCCESS; - } - - /* If it is still in the issue queue then we can safely - * call the completion routine and report abort success. - */ - don = esp->dma_ports_p(esp); - if(don) { - esp->dma_ints_off(esp); - synchronize_irq(esp->irq); - } - if(esp->issue_SC) { - Scsi_Cmnd **prev, *this; - for(prev = (&esp->issue_SC), this = esp->issue_SC; - this; - prev = (Scsi_Cmnd **) &(this->host_scribble), - this = (Scsi_Cmnd *) this->host_scribble) { - if(this == SCptr) { - *prev = (Scsi_Cmnd *) this->host_scribble; - this->host_scribble = NULL; - esp_release_dmabufs(esp, this); - this->result = DID_ABORT << 16; - this->scsi_done(this); - if(don) - esp->dma_ints_on(esp); - return SUCCESS; - } - } - } - - /* Yuck, the command to abort is disconnected, it is not - * worth trying to abort it now if something else is live - * on the bus at this time. So, we let the SCSI code wait - * a little bit and try again later. - */ - if(esp->current_SC) { - if(don) - esp->dma_ints_on(esp); - return FAILED; - } - - /* It's disconnected, we have to reconnect to re-establish - * the nexus and tell the device to abort. However, we really - * cannot 'reconnect' per se. Don't try to be fancy, just - * indicate failure, which causes our caller to reset the whole - * bus. - */ - - if(don) - esp->dma_ints_on(esp); - return FAILED; -} - -/* We've sent ESP_CMD_RS to the ESP, the interrupt had just - * arrived indicating the end of the SCSI bus reset. Our job - * is to clean out the command queues and begin re-execution - * of SCSI commands once more. - */ -static int esp_finish_reset(struct NCR_ESP *esp, - struct ESP_regs *eregs) -{ - Scsi_Cmnd *sp = esp->current_SC; - - /* Clean up currently executing command, if any. */ - if (sp != NULL) { - esp_release_dmabufs(esp, sp); - sp->result = (DID_RESET << 16); - sp->scsi_done(sp); - esp->current_SC = NULL; - } - - /* Clean up disconnected queue, they have been invalidated - * by the bus reset. - */ - if (esp->disconnected_SC) { - while((sp = remove_first_SC(&esp->disconnected_SC)) != NULL) { - esp_release_dmabufs(esp, sp); - sp->result = (DID_RESET << 16); - sp->scsi_done(sp); - } - } - - /* SCSI bus reset is complete. */ - esp->resetting_bus = 0; - wake_up(&esp->reset_queue); - - /* Ok, now it is safe to get commands going once more. */ - if(esp->issue_SC) - esp_exec_cmd(esp); - - return do_intr_end; -} - -static int esp_do_resetbus(struct NCR_ESP *esp, - struct ESP_regs *eregs) -{ - ESPLOG(("esp%d: Resetting scsi bus\n", esp->esp_id)); - esp->resetting_bus = 1; - esp_cmd(esp, eregs, ESP_CMD_RS); - - return do_intr_end; -} - -/* Reset ESP chip, reset hanging bus, then kill active and - * disconnected commands for targets without soft reset. - * - * The host_lock is acquired by caller. - */ -int esp_reset(Scsi_Cmnd *SCptr) -{ - struct NCR_ESP *esp = (struct NCR_ESP *) SCptr->device->host->hostdata; - - spin_lock_irq(esp->ehost->host_lock); - (void) esp_do_resetbus(esp, esp->eregs); - spin_unlock_irq(esp->ehost->host_lock); - - wait_event(esp->reset_queue, (esp->resetting_bus == 0)); - - return SUCCESS; -} - -/* Internal ESP done function. */ -static void esp_done(struct NCR_ESP *esp, int error) -{ - Scsi_Cmnd *done_SC; - - if(esp->current_SC) { - done_SC = esp->current_SC; - esp->current_SC = NULL; - esp_release_dmabufs(esp, done_SC); - done_SC->result = error; - done_SC->scsi_done(done_SC); - - /* Bus is free, issue any commands in the queue. */ - if(esp->issue_SC && !esp->current_SC) - esp_exec_cmd(esp); - } else { - /* Panic is safe as current_SC is null so we may still - * be able to accept more commands to sync disk buffers. - */ - ESPLOG(("panicing\n")); - panic("esp: done() called with NULL esp->current_SC"); - } -} - -/* Wheee, ESP interrupt engine. */ - -/* Forward declarations. */ -static int esp_do_phase_determine(struct NCR_ESP *esp, - struct ESP_regs *eregs); -static int esp_do_data_finale(struct NCR_ESP *esp, struct ESP_regs *eregs); -static int esp_select_complete(struct NCR_ESP *esp, struct ESP_regs *eregs); -static int esp_do_status(struct NCR_ESP *esp, struct ESP_regs *eregs); -static int esp_do_msgin(struct NCR_ESP *esp, struct ESP_regs *eregs); -static int esp_do_msgindone(struct NCR_ESP *esp, struct ESP_regs *eregs); -static int esp_do_msgout(struct NCR_ESP *esp, struct ESP_regs *eregs); -static int esp_do_cmdbegin(struct NCR_ESP *esp, struct ESP_regs *eregs); - -#define sreg_datainp(__sreg) (((__sreg) & ESP_STAT_PMASK) == ESP_DIP) -#define sreg_dataoutp(__sreg) (((__sreg) & ESP_STAT_PMASK) == ESP_DOP) - -/* We try to avoid some interrupts by jumping ahead and see if the ESP - * has gotten far enough yet. Hence the following. - */ -static inline int skipahead1(struct NCR_ESP *esp, struct ESP_regs *eregs, - Scsi_Cmnd *scp, int prev_phase, int new_phase) -{ - if(scp->SCp.sent_command != prev_phase) - return 0; - - if(esp->dma_irq_p(esp)) { - /* Yes, we are able to save an interrupt. */ - esp->sreg = (esp_read(eregs->esp_status) & ~(ESP_STAT_INTR)); - esp->ireg = esp_read(eregs->esp_intrpt); - if(!(esp->ireg & ESP_INTR_SR)) - return 0; - else - return do_reset_complete; - } - /* Ho hum, target is taking forever... */ - scp->SCp.sent_command = new_phase; /* so we don't recurse... */ - return do_intr_end; -} - -static inline int skipahead2(struct NCR_ESP *esp, - struct ESP_regs *eregs, - Scsi_Cmnd *scp, int prev_phase1, int prev_phase2, - int new_phase) -{ - if(scp->SCp.sent_command != prev_phase1 && - scp->SCp.sent_command != prev_phase2) - return 0; - if(esp->dma_irq_p(esp)) { - /* Yes, we are able to save an interrupt. */ - esp->sreg = (esp_read(eregs->esp_status) & ~(ESP_STAT_INTR)); - esp->ireg = esp_read(eregs->esp_intrpt); - if(!(esp->ireg & ESP_INTR_SR)) - return 0; - else - return do_reset_complete; - } - /* Ho hum, target is taking forever... */ - scp->SCp.sent_command = new_phase; /* so we don't recurse... */ - return do_intr_end; -} - -/* Misc. esp helper macros. */ -#define esp_setcount(__eregs, __cnt) \ - esp_write((__eregs)->esp_tclow, ((__cnt) & 0xff)); \ - esp_write((__eregs)->esp_tcmed, (((__cnt) >> 8) & 0xff)) - -#define esp_getcount(__eregs) \ - ((esp_read((__eregs)->esp_tclow)&0xff) | \ - ((esp_read((__eregs)->esp_tcmed)&0xff) << 8)) - -#define fcount(__esp, __eregs) \ - (esp_read((__eregs)->esp_fflags) & ESP_FF_FBYTES) - -#define fnzero(__esp, __eregs) \ - (esp_read((__eregs)->esp_fflags) & ESP_FF_ONOTZERO) - -/* XXX speculative nops unnecessary when continuing amidst a data phase - * XXX even on esp100!!! another case of flooding the bus with I/O reg - * XXX writes... - */ -#define esp_maybe_nop(__esp, __eregs) \ - if((__esp)->erev == esp100) \ - esp_cmd((__esp), (__eregs), ESP_CMD_NULL) - -#define sreg_to_dataphase(__sreg) \ - ((((__sreg) & ESP_STAT_PMASK) == ESP_DOP) ? in_dataout : in_datain) - -/* The ESP100 when in synchronous data phase, can mistake a long final - * REQ pulse from the target as an extra byte, it places whatever is on - * the data lines into the fifo. For now, we will assume when this - * happens that the target is a bit quirky and we don't want to - * be talking synchronously to it anyways. Regardless, we need to - * tell the ESP to eat the extraneous byte so that we can proceed - * to the next phase. - */ -static inline int esp100_sync_hwbug(struct NCR_ESP *esp, struct ESP_regs *eregs, - Scsi_Cmnd *sp, int fifocnt) -{ - /* Do not touch this piece of code. */ - if((!(esp->erev == esp100)) || - (!(sreg_datainp((esp->sreg = esp_read(eregs->esp_status))) && !fifocnt) && - !(sreg_dataoutp(esp->sreg) && !fnzero(esp, eregs)))) { - if(sp->SCp.phase == in_dataout) - esp_cmd(esp, eregs, ESP_CMD_FLUSH); - return 0; - } else { - /* Async mode for this guy. */ - build_sync_nego_msg(esp, 0, 0); - - /* Ack the bogus byte, but set ATN first. */ - esp_cmd(esp, eregs, ESP_CMD_SATN); - esp_cmd(esp, eregs, ESP_CMD_MOK); - return 1; - } -} - -/* This closes the window during a selection with a reselect pending, because - * we use DMA for the selection process the FIFO should hold the correct - * contents if we get reselected during this process. So we just need to - * ack the possible illegal cmd interrupt pending on the esp100. - */ -static inline int esp100_reconnect_hwbug(struct NCR_ESP *esp, - struct ESP_regs *eregs) -{ - volatile unchar junk; - - if(esp->erev != esp100) - return 0; - junk = esp_read(eregs->esp_intrpt); - - if(junk & ESP_INTR_SR) - return 1; - return 0; -} - -/* This verifies the BUSID bits during a reselection so that we know which - * target is talking to us. - */ -static inline int reconnect_target(struct NCR_ESP *esp, struct ESP_regs *eregs) -{ - int it, me = esp->scsi_id_mask, targ = 0; - - if(2 != fcount(esp, eregs)) - return -1; - it = esp_read(eregs->esp_fdata); - if(!(it & me)) - return -1; - it &= ~me; - if(it & (it - 1)) - return -1; - while(!(it & 1)) - targ++, it >>= 1; - return targ; -} - -/* This verifies the identify from the target so that we know which lun is - * being reconnected. - */ -static inline int reconnect_lun(struct NCR_ESP *esp, struct ESP_regs *eregs) -{ - int lun; - - if((esp->sreg & ESP_STAT_PMASK) != ESP_MIP) - return -1; - lun = esp_read(eregs->esp_fdata); - - /* Yes, you read this correctly. We report lun of zero - * if we see parity error. ESP reports parity error for - * the lun byte, and this is the only way to hope to recover - * because the target is connected. - */ - if(esp->sreg & ESP_STAT_PERR) - return 0; - - /* Check for illegal bits being set in the lun. */ - if((lun & 0x40) || !(lun & 0x80)) - return -1; - - return lun & 7; -} - -/* This puts the driver in a state where it can revitalize a command that - * is being continued due to reselection. - */ -static inline void esp_connect(struct NCR_ESP *esp, struct ESP_regs *eregs, - Scsi_Cmnd *sp) -{ - struct scsi_device *dp = sp->device; - struct esp_device *esp_dev = dp->hostdata; - - if(esp->prev_soff != esp_dev->sync_max_offset || - esp->prev_stp != esp_dev->sync_min_period || - (esp->erev > esp100a && - esp->prev_cfg3 != esp->config3[scmd_id(sp)])) { - esp->prev_soff = esp_dev->sync_max_offset; - esp_write(eregs->esp_soff, esp->prev_soff); - esp->prev_stp = esp_dev->sync_min_period; - esp_write(eregs->esp_stp, esp->prev_stp); - if(esp->erev > esp100a) { - esp->prev_cfg3 = esp->config3[scmd_id(sp)]; - esp_write(eregs->esp_cfg3, esp->prev_cfg3); - } - } - esp->current_SC = sp; -} - -/* This will place the current working command back into the issue queue - * if we are to receive a reselection amidst a selection attempt. - */ -static inline void esp_reconnect(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - if(!esp->disconnected_SC) - ESPLOG(("esp%d: Weird, being reselected but disconnected " - "command queue is empty.\n", esp->esp_id)); - esp->snip = 0; - esp->current_SC = NULL; - sp->SCp.phase = not_issued; - append_SC(&esp->issue_SC, sp); -} - -/* Begin message in phase. */ -static int esp_do_msgin(struct NCR_ESP *esp, struct ESP_regs *eregs) -{ - esp_cmd(esp, eregs, ESP_CMD_FLUSH); - esp_maybe_nop(esp, eregs); - esp_cmd(esp, eregs, ESP_CMD_TI); - esp->msgin_len = 1; - esp->msgin_ctr = 0; - esp_advance_phase(esp->current_SC, in_msgindone); - return do_work_bus; -} - -static inline void advance_sg(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - ++sp->SCp.buffer; - --sp->SCp.buffers_residual; - sp->SCp.this_residual = sp->SCp.buffer->length; - if (esp->dma_advance_sg) - esp->dma_advance_sg (sp); - else - sp->SCp.ptr = (char *) virt_to_phys(sg_virt(sp->SCp.buffer)); - -} - -/* Please note that the way I've coded these routines is that I _always_ - * check for a disconnect during any and all information transfer - * phases. The SCSI standard states that the target _can_ cause a BUS - * FREE condition by dropping all MSG/CD/IO/BSY signals. Also note - * that during information transfer phases the target controls every - * change in phase, the only thing the initiator can do is "ask" for - * a message out phase by driving ATN true. The target can, and sometimes - * will, completely ignore this request so we cannot assume anything when - * we try to force a message out phase to abort/reset a target. Most of - * the time the target will eventually be nice and go to message out, so - * we may have to hold on to our state about what we want to tell the target - * for some period of time. - */ - -/* I think I have things working here correctly. Even partial transfers - * within a buffer or sub-buffer should not upset us at all no matter - * how bad the target and/or ESP fucks things up. - */ -static int esp_do_data(struct NCR_ESP *esp, struct ESP_regs *eregs) -{ - Scsi_Cmnd *SCptr = esp->current_SC; - int thisphase, hmuch; - - ESPDATA(("esp_do_data: ")); - esp_maybe_nop(esp, eregs); - thisphase = sreg_to_dataphase(esp->sreg); - esp_advance_phase(SCptr, thisphase); - ESPDATA(("newphase<%s> ", (thisphase == in_datain) ? "DATAIN" : "DATAOUT")); - hmuch = esp->dma_can_transfer(esp, SCptr); - - /* - * XXX MSch: cater for PIO transfer here; PIO used if hmuch == 0 - */ - if (hmuch) { /* DMA */ - /* - * DMA - */ - ESPDATA(("hmuch<%d> ", hmuch)); - esp->current_transfer_size = hmuch; - esp_setcount(eregs, (esp->fas_premature_intr_workaround ? - (hmuch + 0x40) : hmuch)); - esp->dma_setup(esp, (__u32)((unsigned long)SCptr->SCp.ptr), - hmuch, (thisphase == in_datain)); - ESPDATA(("DMA|TI --> do_intr_end\n")); - esp_cmd(esp, eregs, ESP_CMD_DMA | ESP_CMD_TI); - return do_intr_end; - /* - * end DMA - */ - } else { - /* - * PIO - */ - int oldphase, i = 0; /* or where we left off last time ?? esp->current_data ?? */ - int fifocnt = 0; - unsigned char *p = phys_to_virt((unsigned long)SCptr->SCp.ptr); - - oldphase = esp_read(eregs->esp_status) & ESP_STAT_PMASK; - - /* - * polled transfer; ugly, can we make this happen in a DRQ - * interrupt handler ?? - * requires keeping track of state information in host or - * command struct! - * Problem: I've never seen a DRQ happen on Mac, not even - * with ESP_CMD_DMA ... - */ - - /* figure out how much needs to be transferred */ - hmuch = SCptr->SCp.this_residual; - ESPDATA(("hmuch<%d> pio ", hmuch)); - esp->current_transfer_size = hmuch; - - /* tell the ESP ... */ - esp_setcount(eregs, hmuch); - - /* loop */ - while (hmuch) { - int j, fifo_stuck = 0, newphase; - unsigned long timeout; -#if 0 - unsigned long flags; -#endif -#if 0 - if ( i % 10 ) - ESPDATA(("\r")); - else - ESPDATA(( /*"\n"*/ "\r")); -#endif -#if 0 - local_irq_save(flags); -#endif - if(thisphase == in_datain) { - /* 'go' ... */ - esp_cmd(esp, eregs, ESP_CMD_TI); - - /* wait for data */ - timeout = 1000000; - while (!((esp->sreg=esp_read(eregs->esp_status)) & ESP_STAT_INTR) && --timeout) - udelay(2); - if (timeout == 0) - printk("DRQ datain timeout! \n"); - - newphase = esp->sreg & ESP_STAT_PMASK; - - /* see how much we got ... */ - fifocnt = (esp_read(eregs->esp_fflags) & ESP_FF_FBYTES); - - if (!fifocnt) - fifo_stuck++; - else - fifo_stuck = 0; - - ESPDATA(("\rgot %d st %x ph %x", fifocnt, esp->sreg, newphase)); - - /* read fifo */ - for(j=0;j<fifocnt;j++) - p[i++] = esp_read(eregs->esp_fdata); - - ESPDATA(("(%d) ", i)); - - /* how many to go ?? */ - hmuch -= fifocnt; - - /* break if status phase !! */ - if(newphase == ESP_STATP) { - /* clear int. */ - esp->ireg = esp_read(eregs->esp_intrpt); - break; - } - } else { -#define MAX_FIFO 8 - /* how much will fit ? */ - int this_count = MAX_FIFO - fifocnt; - if (this_count > hmuch) - this_count = hmuch; - - /* fill fifo */ - for(j=0;j<this_count;j++) - esp_write(eregs->esp_fdata, p[i++]); - - /* how many left if this goes out ?? */ - hmuch -= this_count; - - /* 'go' ... */ - esp_cmd(esp, eregs, ESP_CMD_TI); - - /* wait for 'got it' */ - timeout = 1000000; - while (!((esp->sreg=esp_read(eregs->esp_status)) & ESP_STAT_INTR) && --timeout) - udelay(2); - if (timeout == 0) - printk("DRQ dataout timeout! \n"); - - newphase = esp->sreg & ESP_STAT_PMASK; - - /* need to check how much was sent ?? */ - fifocnt = (esp_read(eregs->esp_fflags) & ESP_FF_FBYTES); - - ESPDATA(("\rsent %d st %x ph %x", this_count - fifocnt, esp->sreg, newphase)); - - ESPDATA(("(%d) ", i)); - - /* break if status phase !! */ - if(newphase == ESP_STATP) { - /* clear int. */ - esp->ireg = esp_read(eregs->esp_intrpt); - break; - } - - } - - /* clear int. */ - esp->ireg = esp_read(eregs->esp_intrpt); - - ESPDATA(("ir %x ... ", esp->ireg)); - - if (hmuch == 0) - ESPDATA(("done! \n")); - -#if 0 - local_irq_restore(flags); -#endif - - /* check new bus phase */ - if (newphase != oldphase && i < esp->current_transfer_size) { - /* something happened; disconnect ?? */ - ESPDATA(("phase change, dropped out with %d done ... ", i)); - break; - } - - /* check int. status */ - if (esp->ireg & ESP_INTR_DC) { - /* disconnect */ - ESPDATA(("disconnect; %d transferred ... ", i)); - break; - } else if (esp->ireg & ESP_INTR_FDONE) { - /* function done */ - ESPDATA(("function done; %d transferred ... ", i)); - break; - } - - /* XXX fixme: bail out on stall */ - if (fifo_stuck > 10) { - /* we're stuck */ - ESPDATA(("fifo stall; %d transferred ... ", i)); - break; - } - } - - ESPDATA(("\n")); - /* check successful completion ?? */ - - if (thisphase == in_dataout) - hmuch += fifocnt; /* stuck?? adjust data pointer ...*/ - - /* tell do_data_finale how much was transferred */ - esp->current_transfer_size -= hmuch; - - /* still not completely sure on this one ... */ - return /*do_intr_end*/ do_work_bus /*do_phase_determine*/ ; - - /* - * end PIO - */ - } - return do_intr_end; -} - -/* See how successful the data transfer was. */ -static int esp_do_data_finale(struct NCR_ESP *esp, - struct ESP_regs *eregs) -{ - Scsi_Cmnd *SCptr = esp->current_SC; - struct esp_device *esp_dev = SCptr->device->hostdata; - int bogus_data = 0, bytes_sent = 0, fifocnt, ecount = 0; - - if(esp->dma_led_off) - esp->dma_led_off(esp); - - ESPDATA(("esp_do_data_finale: ")); - - if(SCptr->SCp.phase == in_datain) { - if(esp->sreg & ESP_STAT_PERR) { - /* Yuck, parity error. The ESP asserts ATN - * so that we can go to message out phase - * immediately and inform the target that - * something bad happened. - */ - ESPLOG(("esp%d: data bad parity detected.\n", - esp->esp_id)); - esp->cur_msgout[0] = INITIATOR_ERROR; - esp->msgout_len = 1; - } - if(esp->dma_drain) - esp->dma_drain(esp); - } - if(esp->dma_invalidate) - esp->dma_invalidate(esp); - - /* This could happen for the above parity error case. */ - if(!(esp->ireg == ESP_INTR_BSERV)) { - /* Please go to msgout phase, please please please... */ - ESPLOG(("esp%d: !BSERV after data, probably to msgout\n", - esp->esp_id)); - return esp_do_phase_determine(esp, eregs); - } - - /* Check for partial transfers and other horrible events. */ - fifocnt = (esp_read(eregs->esp_fflags) & ESP_FF_FBYTES); - ecount = esp_getcount(eregs); - if(esp->fas_premature_intr_workaround) - ecount -= 0x40; - bytes_sent = esp->current_transfer_size; - - ESPDATA(("trans_sz=%d, ", bytes_sent)); - if(!(esp->sreg & ESP_STAT_TCNT)) - bytes_sent -= ecount; - if(SCptr->SCp.phase == in_dataout) - bytes_sent -= fifocnt; - - ESPDATA(("bytes_sent=%d (ecount=%d, fifocnt=%d), ", bytes_sent, - ecount, fifocnt)); - - /* If we were in synchronous mode, check for peculiarities. */ - if(esp_dev->sync_max_offset) - bogus_data = esp100_sync_hwbug(esp, eregs, SCptr, fifocnt); - else - esp_cmd(esp, eregs, ESP_CMD_FLUSH); - - /* Until we are sure of what has happened, we are certainly - * in the dark. - */ - esp_advance_phase(SCptr, in_the_dark); - - /* Check for premature interrupt condition. Can happen on FAS2x6 - * chips. QLogic recommends a workaround by overprogramming the - * transfer counters, but this makes doing scatter-gather impossible. - * Until there is a way to disable scatter-gather for a single target, - * and not only for the entire host adapter as it is now, the workaround - * is way to expensive performance wise. - * Instead, it turns out that when this happens the target has disconnected - * already but it doesn't show in the interrupt register. Compensate for - * that here to try and avoid a SCSI bus reset. - */ - if(!esp->fas_premature_intr_workaround && (fifocnt == 1) && - sreg_dataoutp(esp->sreg)) { - ESPLOG(("esp%d: Premature interrupt, enabling workaround\n", - esp->esp_id)); -#if 0 - /* Disable scatter-gather operations, they are not possible - * when using this workaround. - */ - esp->ehost->sg_tablesize = 0; - esp->ehost->use_clustering = ENABLE_CLUSTERING; - esp->fas_premature_intr_workaround = 1; - bytes_sent = 0; - if(SCptr->use_sg) { - ESPLOG(("esp%d: Aborting scatter-gather operation\n", - esp->esp_id)); - esp->cur_msgout[0] = ABORT; - esp->msgout_len = 1; - esp->msgout_ctr = 0; - esp_cmd(esp, eregs, ESP_CMD_SATN); - esp_setcount(eregs, 0xffff); - esp_cmd(esp, eregs, ESP_CMD_NULL); - esp_cmd(esp, eregs, ESP_CMD_TPAD | ESP_CMD_DMA); - return do_intr_end; - } -#else - /* Just set the disconnected bit. That's what appears to - * happen anyway. The state machine will pick it up when - * we return. - */ - esp->ireg |= ESP_INTR_DC; -#endif - } - - if(bytes_sent < 0) { - /* I've seen this happen due to lost state in this - * driver. No idea why it happened, but allowing - * this value to be negative caused things to - * lock up. This allows greater chance of recovery. - * In fact every time I've seen this, it has been - * a driver bug without question. - */ - ESPLOG(("esp%d: yieee, bytes_sent < 0!\n", esp->esp_id)); - ESPLOG(("esp%d: csz=%d fifocount=%d ecount=%d\n", - esp->esp_id, - esp->current_transfer_size, fifocnt, ecount)); - ESPLOG(("esp%d: use_sg=%d ptr=%p this_residual=%d\n", - esp->esp_id, - SCptr->use_sg, SCptr->SCp.ptr, SCptr->SCp.this_residual)); - ESPLOG(("esp%d: Forcing async for target %d\n", esp->esp_id, - SCptr->device->id)); - SCptr->device->borken = 1; - esp_dev->sync = 0; - bytes_sent = 0; - } - - /* Update the state of our transfer. */ - SCptr->SCp.ptr += bytes_sent; - SCptr->SCp.this_residual -= bytes_sent; - if(SCptr->SCp.this_residual < 0) { - /* shit */ - ESPLOG(("esp%d: Data transfer overrun.\n", esp->esp_id)); - SCptr->SCp.this_residual = 0; - } - - /* Maybe continue. */ - if(!bogus_data) { - ESPDATA(("!bogus_data, ")); - /* NO MATTER WHAT, we advance the scatterlist, - * if the target should decide to disconnect - * in between scatter chunks (which is common) - * we could die horribly! I used to have the sg - * advance occur only if we are going back into - * (or are staying in) a data phase, you can - * imagine the hell I went through trying to - * figure this out. - */ - if(!SCptr->SCp.this_residual && SCptr->SCp.buffers_residual) - advance_sg(esp, SCptr); -#ifdef DEBUG_ESP_DATA - if(sreg_datainp(esp->sreg) || sreg_dataoutp(esp->sreg)) { - ESPDATA(("to more data\n")); - } else { - ESPDATA(("to new phase\n")); - } -#endif - return esp_do_phase_determine(esp, eregs); - } - /* Bogus data, just wait for next interrupt. */ - ESPLOG(("esp%d: bogus_data during end of data phase\n", - esp->esp_id)); - return do_intr_end; -} - -/* We received a non-good status return at the end of - * running a SCSI command. This is used to decide if - * we should clear our synchronous transfer state for - * such a device when that happens. - * - * The idea is that when spinning up a disk or rewinding - * a tape, we don't want to go into a loop re-negotiating - * synchronous capabilities over and over. - */ -static int esp_should_clear_sync(Scsi_Cmnd *sp) -{ - unchar cmd = sp->cmnd[0]; - - /* These cases are for spinning up a disk and - * waiting for that spinup to complete. - */ - if(cmd == START_STOP) - return 0; - - if(cmd == TEST_UNIT_READY) - return 0; - - /* One more special case for SCSI tape drives, - * this is what is used to probe the device for - * completion of a rewind or tape load operation. - */ - if(sp->device->type == TYPE_TAPE && cmd == MODE_SENSE) - return 0; - - return 1; -} - -/* Either a command is completing or a target is dropping off the bus - * to continue the command in the background so we can do other work. - */ -static int esp_do_freebus(struct NCR_ESP *esp, struct ESP_regs *eregs) -{ - Scsi_Cmnd *SCptr = esp->current_SC; - int rval; - - rval = skipahead2(esp, eregs, SCptr, in_status, in_msgindone, in_freeing); - if(rval) - return rval; - - if(esp->ireg != ESP_INTR_DC) { - ESPLOG(("esp%d: Target will not disconnect\n", esp->esp_id)); - return do_reset_bus; /* target will not drop BSY... */ - } - esp->msgout_len = 0; - esp->prevmsgout = NOP; - if(esp->prevmsgin == COMMAND_COMPLETE) { - struct esp_device *esp_dev = SCptr->device->hostdata; - /* Normal end of nexus. */ - if(esp->disconnected_SC) - esp_cmd(esp, eregs, ESP_CMD_ESEL); - - if(SCptr->SCp.Status != GOOD && - SCptr->SCp.Status != CONDITION_GOOD && - ((1<<scmd_id(SCptr)) & esp->targets_present) && - esp_dev->sync && esp_dev->sync_max_offset) { - /* SCSI standard says that the synchronous capabilities - * should be renegotiated at this point. Most likely - * we are about to request sense from this target - * in which case we want to avoid using sync - * transfers until we are sure of the current target - * state. - */ - ESPMISC(("esp: Status <%d> for target %d lun %d\n", - SCptr->SCp.Status, SCptr->device->id, SCptr->device->lun)); - - /* But don't do this when spinning up a disk at - * boot time while we poll for completion as it - * fills up the console with messages. Also, tapes - * can report not ready many times right after - * loading up a tape. - */ - if(esp_should_clear_sync(SCptr) != 0) - esp_dev->sync = 0; - } - ESPDISC(("F<%02x,%02x>", SCptr->device->id, SCptr->device->lun)); - esp_done(esp, ((SCptr->SCp.Status & 0xff) | - ((SCptr->SCp.Message & 0xff)<<8) | - (DID_OK << 16))); - } else if(esp->prevmsgin == DISCONNECT) { - /* Normal disconnect. */ - esp_cmd(esp, eregs, ESP_CMD_ESEL); - ESPDISC(("D<%02x,%02x>", SCptr->device->id, SCptr->device->lun)); - append_SC(&esp->disconnected_SC, SCptr); - esp->current_SC = NULL; - if(esp->issue_SC) - esp_exec_cmd(esp); - } else { - /* Driver bug, we do not expect a disconnect here - * and should not have advanced the state engine - * to in_freeing. - */ - ESPLOG(("esp%d: last msg not disc and not cmd cmplt.\n", - esp->esp_id)); - return do_reset_bus; - } - return do_intr_end; -} - -/* When a reselect occurs, and we cannot find the command to - * reconnect to in our queues, we do this. - */ -static int esp_bad_reconnect(struct NCR_ESP *esp) -{ - Scsi_Cmnd *sp; - - ESPLOG(("esp%d: Eieeee, reconnecting unknown command!\n", - esp->esp_id)); - ESPLOG(("QUEUE DUMP\n")); - sp = esp->issue_SC; - ESPLOG(("esp%d: issue_SC[", esp->esp_id)); - while(sp) { - ESPLOG(("<%02x,%02x>", sp->device->id, sp->device->lun)); - sp = (Scsi_Cmnd *) sp->host_scribble; - } - ESPLOG(("]\n")); - sp = esp->current_SC; - ESPLOG(("esp%d: current_SC[", esp->esp_id)); - while(sp) { - ESPLOG(("<%02x,%02x>", sp->device->id, sp->device->lun)); - sp = (Scsi_Cmnd *) sp->host_scribble; - } - ESPLOG(("]\n")); - sp = esp->disconnected_SC; - ESPLOG(("esp%d: disconnected_SC[", esp->esp_id)); - while(sp) { - ESPLOG(("<%02x,%02x>", sp->device->id, sp->device->lun)); - sp = (Scsi_Cmnd *) sp->host_scribble; - } - ESPLOG(("]\n")); - return do_reset_bus; -} - -/* Do the needy when a target tries to reconnect to us. */ -static int esp_do_reconnect(struct NCR_ESP *esp, - struct ESP_regs *eregs) -{ - int lun, target; - Scsi_Cmnd *SCptr; - - /* Check for all bogus conditions first. */ - target = reconnect_target(esp, eregs); - if(target < 0) { - ESPDISC(("bad bus bits\n")); - return do_reset_bus; - } - lun = reconnect_lun(esp, eregs); - if(lun < 0) { - ESPDISC(("target=%2x, bad identify msg\n", target)); - return do_reset_bus; - } - - /* Things look ok... */ - ESPDISC(("R<%02x,%02x>", target, lun)); - - esp_cmd(esp, eregs, ESP_CMD_FLUSH); - if(esp100_reconnect_hwbug(esp, eregs)) - return do_reset_bus; - esp_cmd(esp, eregs, ESP_CMD_NULL); - - SCptr = remove_SC(&esp->disconnected_SC, (unchar) target, (unchar) lun); - if(!SCptr) - return esp_bad_reconnect(esp); - - esp_connect(esp, eregs, SCptr); - esp_cmd(esp, eregs, ESP_CMD_MOK); - - /* Reconnect implies a restore pointers operation. */ - esp_restore_pointers(esp, SCptr); - - esp->snip = 0; - esp_advance_phase(SCptr, in_the_dark); - return do_intr_end; -} - -/* End of NEXUS (hopefully), pick up status + message byte then leave if - * all goes well. - */ -static int esp_do_status(struct NCR_ESP *esp, struct ESP_regs *eregs) -{ - Scsi_Cmnd *SCptr = esp->current_SC; - int intr, rval; - - rval = skipahead1(esp, eregs, SCptr, in_the_dark, in_status); - if(rval) - return rval; - - intr = esp->ireg; - ESPSTAT(("esp_do_status: ")); - if(intr != ESP_INTR_DC) { - int message_out = 0; /* for parity problems */ - - /* Ack the message. */ - ESPSTAT(("ack msg, ")); - esp_cmd(esp, eregs, ESP_CMD_MOK); - - if(esp->dma_poll) - esp->dma_poll(esp, (unsigned char *) esp->esp_command); - - ESPSTAT(("got something, ")); - /* ESP chimes in with one of - * - * 1) function done interrupt: - * both status and message in bytes - * are available - * - * 2) bus service interrupt: - * only status byte was acquired - * - * 3) Anything else: - * can't happen, but we test for it - * anyways - * - * ALSO: If bad parity was detected on either - * the status _or_ the message byte then - * the ESP has asserted ATN on the bus - * and we must therefore wait for the - * next phase change. - */ - if(intr & ESP_INTR_FDONE) { - /* We got it all, hallejulia. */ - ESPSTAT(("got both, ")); - SCptr->SCp.Status = esp->esp_command[0]; - SCptr->SCp.Message = esp->esp_command[1]; - esp->prevmsgin = SCptr->SCp.Message; - esp->cur_msgin[0] = SCptr->SCp.Message; - if(esp->sreg & ESP_STAT_PERR) { - /* There was bad parity for the - * message byte, the status byte - * was ok. - */ - message_out = MSG_PARITY_ERROR; - } - } else if(intr == ESP_INTR_BSERV) { - /* Only got status byte. */ - ESPLOG(("esp%d: got status only, ", esp->esp_id)); - if(!(esp->sreg & ESP_STAT_PERR)) { - SCptr->SCp.Status = esp->esp_command[0]; - SCptr->SCp.Message = 0xff; - } else { - /* The status byte had bad parity. - * we leave the scsi_pointer Status - * field alone as we set it to a default - * of CHECK_CONDITION in esp_queue. - */ - message_out = INITIATOR_ERROR; - } - } else { - /* This shouldn't happen ever. */ - ESPSTAT(("got bolixed\n")); - esp_advance_phase(SCptr, in_the_dark); - return esp_do_phase_determine(esp, eregs); - } - - if(!message_out) { - ESPSTAT(("status=%2x msg=%2x, ", SCptr->SCp.Status, - SCptr->SCp.Message)); - if(SCptr->SCp.Message == COMMAND_COMPLETE) { - ESPSTAT(("and was COMMAND_COMPLETE\n")); - esp_advance_phase(SCptr, in_freeing); - return esp_do_freebus(esp, eregs); - } else { - ESPLOG(("esp%d: and _not_ COMMAND_COMPLETE\n", - esp->esp_id)); - esp->msgin_len = esp->msgin_ctr = 1; - esp_advance_phase(SCptr, in_msgindone); - return esp_do_msgindone(esp, eregs); - } - } else { - /* With luck we'll be able to let the target - * know that bad parity happened, it will know - * which byte caused the problems and send it - * again. For the case where the status byte - * receives bad parity, I do not believe most - * targets recover very well. We'll see. - */ - ESPLOG(("esp%d: bad parity somewhere mout=%2x\n", - esp->esp_id, message_out)); - esp->cur_msgout[0] = message_out; - esp->msgout_len = esp->msgout_ctr = 1; - esp_advance_phase(SCptr, in_the_dark); - return esp_do_phase_determine(esp, eregs); - } - } else { - /* If we disconnect now, all hell breaks loose. */ - ESPLOG(("esp%d: whoops, disconnect\n", esp->esp_id)); - esp_advance_phase(SCptr, in_the_dark); - return esp_do_phase_determine(esp, eregs); - } -} - -static int esp_enter_status(struct NCR_ESP *esp, - struct ESP_regs *eregs) -{ - unchar thecmd = ESP_CMD_ICCSEQ; - - esp_cmd(esp, eregs, ESP_CMD_FLUSH); - - if(esp->do_pio_cmds) { - esp_advance_phase(esp->current_SC, in_status); - esp_cmd(esp, eregs, thecmd); - while(!(esp_read(esp->eregs->esp_status) & ESP_STAT_INTR)); - esp->esp_command[0] = esp_read(eregs->esp_fdata); - while(!(esp_read(esp->eregs->esp_status) & ESP_STAT_INTR)); - esp->esp_command[1] = esp_read(eregs->esp_fdata); - } else { - esp->esp_command[0] = esp->esp_command[1] = 0xff; - esp_write(eregs->esp_tclow, 2); - esp_write(eregs->esp_tcmed, 0); - esp->dma_init_read(esp, esp->esp_command_dvma, 2); - thecmd |= ESP_CMD_DMA; - esp_cmd(esp, eregs, thecmd); - esp_advance_phase(esp->current_SC, in_status); - } - - return esp_do_status(esp, eregs); -} - -static int esp_disconnect_amidst_phases(struct NCR_ESP *esp, - struct ESP_regs *eregs) -{ - Scsi_Cmnd *sp = esp->current_SC; - struct esp_device *esp_dev = sp->device->hostdata; - - /* This means real problems if we see this - * here. Unless we were actually trying - * to force the device to abort/reset. - */ - ESPLOG(("esp%d: Disconnect amidst phases, ", esp->esp_id)); - ESPLOG(("pphase<%s> cphase<%s>, ", - phase_string(sp->SCp.phase), - phase_string(sp->SCp.sent_command))); - - if(esp->disconnected_SC) - esp_cmd(esp, eregs, ESP_CMD_ESEL); - - switch(esp->cur_msgout[0]) { - default: - /* We didn't expect this to happen at all. */ - ESPLOG(("device is bolixed\n")); - esp_advance_phase(sp, in_tgterror); - esp_done(esp, (DID_ERROR << 16)); - break; - - case BUS_DEVICE_RESET: - ESPLOG(("device reset successful\n")); - esp_dev->sync_max_offset = 0; - esp_dev->sync_min_period = 0; - esp_dev->sync = 0; - esp_advance_phase(sp, in_resetdev); - esp_done(esp, (DID_RESET << 16)); - break; - - case ABORT: - ESPLOG(("device abort successful\n")); - esp_advance_phase(sp, in_abortone); - esp_done(esp, (DID_ABORT << 16)); - break; - - }; - return do_intr_end; -} - -static int esp_enter_msgout(struct NCR_ESP *esp, - struct ESP_regs *eregs) -{ - esp_advance_phase(esp->current_SC, in_msgout); - return esp_do_msgout(esp, eregs); -} - -static int esp_enter_msgin(struct NCR_ESP *esp, - struct ESP_regs *eregs) -{ - esp_advance_phase(esp->current_SC, in_msgin); - return esp_do_msgin(esp, eregs); -} - -static int esp_enter_cmd(struct NCR_ESP *esp, - struct ESP_regs *eregs) -{ - esp_advance_phase(esp->current_SC, in_cmdbegin); - return esp_do_cmdbegin(esp, eregs); -} - -static int esp_enter_badphase(struct NCR_ESP *esp, - struct ESP_regs *eregs) -{ - ESPLOG(("esp%d: Bizarre bus phase %2x.\n", esp->esp_id, - esp->sreg & ESP_STAT_PMASK)); - return do_reset_bus; -} - -typedef int (*espfunc_t)(struct NCR_ESP *, - struct ESP_regs *); - -static espfunc_t phase_vector[] = { - esp_do_data, /* ESP_DOP */ - esp_do_data, /* ESP_DIP */ - esp_enter_cmd, /* ESP_CMDP */ - esp_enter_status, /* ESP_STATP */ - esp_enter_badphase, /* ESP_STAT_PMSG */ - esp_enter_badphase, /* ESP_STAT_PMSG | ESP_STAT_PIO */ - esp_enter_msgout, /* ESP_MOP */ - esp_enter_msgin, /* ESP_MIP */ -}; - -/* The target has control of the bus and we have to see where it has - * taken us. - */ -static int esp_do_phase_determine(struct NCR_ESP *esp, - struct ESP_regs *eregs) -{ - if ((esp->ireg & ESP_INTR_DC) != 0) - return esp_disconnect_amidst_phases(esp, eregs); - return phase_vector[esp->sreg & ESP_STAT_PMASK](esp, eregs); -} - -/* First interrupt after exec'ing a cmd comes here. */ -static int esp_select_complete(struct NCR_ESP *esp, struct ESP_regs *eregs) -{ - Scsi_Cmnd *SCptr = esp->current_SC; - struct esp_device *esp_dev = SCptr->device->hostdata; - int cmd_bytes_sent, fcnt; - - fcnt = (esp_read(eregs->esp_fflags) & ESP_FF_FBYTES); - cmd_bytes_sent = esp->dma_bytes_sent(esp, fcnt); - if(esp->dma_invalidate) - esp->dma_invalidate(esp); - - /* Let's check to see if a reselect happened - * while we we're trying to select. This must - * be checked first. - */ - if(esp->ireg == (ESP_INTR_RSEL | ESP_INTR_FDONE)) { - esp_reconnect(esp, SCptr); - return esp_do_reconnect(esp, eregs); - } - - /* Looks like things worked, we should see a bus service & - * a function complete interrupt at this point. Note we - * are doing a direct comparison because we don't want to - * be fooled into thinking selection was successful if - * ESP_INTR_DC is set, see below. - */ - if(esp->ireg == (ESP_INTR_FDONE | ESP_INTR_BSERV)) { - /* target speaks... */ - esp->targets_present |= (1<<scmd_id(SCptr)); - - /* What if the target ignores the sdtr? */ - if(esp->snip) - esp_dev->sync = 1; - - /* See how far, if at all, we got in getting - * the information out to the target. - */ - switch(esp->seqreg) { - default: - - case ESP_STEP_ASEL: - /* Arbitration won, target selected, but - * we are in some phase which is not command - * phase nor is it message out phase. - * - * XXX We've confused the target, obviously. - * XXX So clear it's state, but we also end - * XXX up clearing everyone elses. That isn't - * XXX so nice. I'd like to just reset this - * XXX target, but if I cannot even get it's - * XXX attention and finish selection to talk - * XXX to it, there is not much more I can do. - * XXX If we have a loaded bus we're going to - * XXX spend the next second or so renegotiating - * XXX for synchronous transfers. - */ - ESPLOG(("esp%d: STEP_ASEL for tgt %d\n", - esp->esp_id, SCptr->device->id)); - - case ESP_STEP_SID: - /* Arbitration won, target selected, went - * to message out phase, sent one message - * byte, then we stopped. ATN is asserted - * on the SCSI bus and the target is still - * there hanging on. This is a legal - * sequence step if we gave the ESP a select - * and stop command. - * - * XXX See above, I could set the borken flag - * XXX in the device struct and retry the - * XXX command. But would that help for - * XXX tagged capable targets? - */ - - case ESP_STEP_NCMD: - /* Arbitration won, target selected, maybe - * sent the one message byte in message out - * phase, but we did not go to command phase - * in the end. Actually, we could have sent - * only some of the message bytes if we tried - * to send out the entire identify and tag - * message using ESP_CMD_SA3. - */ - cmd_bytes_sent = 0; - break; - - case ESP_STEP_PPC: - /* No, not the powerPC pinhead. Arbitration - * won, all message bytes sent if we went to - * message out phase, went to command phase - * but only part of the command was sent. - * - * XXX I've seen this, but usually in conjunction - * XXX with a gross error which appears to have - * XXX occurred between the time I told the - * XXX ESP to arbitrate and when I got the - * XXX interrupt. Could I have misloaded the - * XXX command bytes into the fifo? Actually, - * XXX I most likely missed a phase, and therefore - * XXX went into never never land and didn't even - * XXX know it. That was the old driver though. - * XXX What is even more peculiar is that the ESP - * XXX showed the proper function complete and - * XXX bus service bits in the interrupt register. - */ - - case ESP_STEP_FINI4: - case ESP_STEP_FINI5: - case ESP_STEP_FINI6: - case ESP_STEP_FINI7: - /* Account for the identify message */ - if(SCptr->SCp.phase == in_slct_norm) - cmd_bytes_sent -= 1; - }; - esp_cmd(esp, eregs, ESP_CMD_NULL); - - /* Be careful, we could really get fucked during synchronous - * data transfers if we try to flush the fifo now. - */ - if(!fcnt && /* Fifo is empty and... */ - /* either we are not doing synchronous transfers or... */ - (!esp_dev->sync_max_offset || - /* We are not going into data in phase. */ - ((esp->sreg & ESP_STAT_PMASK) != ESP_DIP))) - esp_cmd(esp, eregs, ESP_CMD_FLUSH); /* flush is safe */ - - /* See how far we got if this is not a slow command. */ - if(!esp->esp_slowcmd) { - if(cmd_bytes_sent < 0) - cmd_bytes_sent = 0; - if(cmd_bytes_sent != SCptr->cmd_len) { - /* Crapola, mark it as a slowcmd - * so that we have some chance of - * keeping the command alive with - * good luck. - * - * XXX Actually, if we didn't send it all - * XXX this means either we didn't set things - * XXX up properly (driver bug) or the target - * XXX or the ESP detected parity on one of - * XXX the command bytes. This makes much - * XXX more sense, and therefore this code - * XXX should be changed to send out a - * XXX parity error message or if the status - * XXX register shows no parity error then - * XXX just expect the target to bring the - * XXX bus into message in phase so that it - * XXX can send us the parity error message. - * XXX SCSI sucks... - */ - esp->esp_slowcmd = 1; - esp->esp_scmdp = &(SCptr->cmnd[cmd_bytes_sent]); - esp->esp_scmdleft = (SCptr->cmd_len - cmd_bytes_sent); - } - } - - /* Now figure out where we went. */ - esp_advance_phase(SCptr, in_the_dark); - return esp_do_phase_determine(esp, eregs); - } - - /* Did the target even make it? */ - if(esp->ireg == ESP_INTR_DC) { - /* wheee... nobody there or they didn't like - * what we told it to do, clean up. - */ - - /* If anyone is off the bus, but working on - * a command in the background for us, tell - * the ESP to listen for them. - */ - if(esp->disconnected_SC) - esp_cmd(esp, eregs, ESP_CMD_ESEL); - - if(((1<<SCptr->device->id) & esp->targets_present) && - esp->seqreg && esp->cur_msgout[0] == EXTENDED_MESSAGE && - (SCptr->SCp.phase == in_slct_msg || - SCptr->SCp.phase == in_slct_stop)) { - /* shit */ - esp->snip = 0; - ESPLOG(("esp%d: Failed synchronous negotiation for target %d " - "lun %d\n", esp->esp_id, SCptr->device->id, SCptr->device->lun)); - esp_dev->sync_max_offset = 0; - esp_dev->sync_min_period = 0; - esp_dev->sync = 1; /* so we don't negotiate again */ - - /* Run the command again, this time though we - * won't try to negotiate for synchronous transfers. - * - * XXX I'd like to do something like send an - * XXX INITIATOR_ERROR or ABORT message to the - * XXX target to tell it, "Sorry I confused you, - * XXX please come back and I will be nicer next - * XXX time". But that requires having the target - * XXX on the bus, and it has dropped BSY on us. - */ - esp->current_SC = NULL; - esp_advance_phase(SCptr, not_issued); - prepend_SC(&esp->issue_SC, SCptr); - esp_exec_cmd(esp); - return do_intr_end; - } - - /* Ok, this is normal, this is what we see during boot - * or whenever when we are scanning the bus for targets. - * But first make sure that is really what is happening. - */ - if(((1<<SCptr->device->id) & esp->targets_present)) { - ESPLOG(("esp%d: Warning, live target %d not responding to " - "selection.\n", esp->esp_id, SCptr->device->id)); - - /* This _CAN_ happen. The SCSI standard states that - * the target is to _not_ respond to selection if - * _it_ detects bad parity on the bus for any reason. - * Therefore, we assume that if we've talked successfully - * to this target before, bad parity is the problem. - */ - esp_done(esp, (DID_PARITY << 16)); - } else { - /* Else, there really isn't anyone there. */ - ESPMISC(("esp: selection failure, maybe nobody there?\n")); - ESPMISC(("esp: target %d lun %d\n", - SCptr->device->id, SCptr->device->lun)); - esp_done(esp, (DID_BAD_TARGET << 16)); - } - return do_intr_end; - } - - - ESPLOG(("esp%d: Selection failure.\n", esp->esp_id)); - printk("esp%d: Currently -- ", esp->esp_id); - esp_print_ireg(esp->ireg); - printk(" "); - esp_print_statreg(esp->sreg); - printk(" "); - esp_print_seqreg(esp->seqreg); - printk("\n"); - printk("esp%d: New -- ", esp->esp_id); - esp->sreg = esp_read(eregs->esp_status); - esp->seqreg = esp_read(eregs->esp_sstep); - esp->ireg = esp_read(eregs->esp_intrpt); - esp_print_ireg(esp->ireg); - printk(" "); - esp_print_statreg(esp->sreg); - printk(" "); - esp_print_seqreg(esp->seqreg); - printk("\n"); - ESPLOG(("esp%d: resetting bus\n", esp->esp_id)); - return do_reset_bus; /* ugh... */ -} - -/* Continue reading bytes for msgin phase. */ -static int esp_do_msgincont(struct NCR_ESP *esp, struct ESP_regs *eregs) -{ - if(esp->ireg & ESP_INTR_BSERV) { - /* in the right phase too? */ - if((esp->sreg & ESP_STAT_PMASK) == ESP_MIP) { - /* phew... */ - esp_cmd(esp, eregs, ESP_CMD_TI); - esp_advance_phase(esp->current_SC, in_msgindone); - return do_intr_end; - } - - /* We changed phase but ESP shows bus service, - * in this case it is most likely that we, the - * hacker who has been up for 20hrs straight - * staring at the screen, drowned in coffee - * smelling like retched cigarette ashes - * have miscoded something..... so, try to - * recover as best we can. - */ - ESPLOG(("esp%d: message in mis-carriage.\n", esp->esp_id)); - } - esp_advance_phase(esp->current_SC, in_the_dark); - return do_phase_determine; -} - -static int check_singlebyte_msg(struct NCR_ESP *esp, - struct ESP_regs *eregs) -{ - esp->prevmsgin = esp->cur_msgin[0]; - if(esp->cur_msgin[0] & 0x80) { - /* wheee... */ - ESPLOG(("esp%d: target sends identify amidst phases\n", - esp->esp_id)); - esp_advance_phase(esp->current_SC, in_the_dark); - return 0; - } else if(((esp->cur_msgin[0] & 0xf0) == 0x20) || - (esp->cur_msgin[0] == EXTENDED_MESSAGE)) { - esp->msgin_len = 2; - esp_advance_phase(esp->current_SC, in_msgincont); - return 0; - } - esp_advance_phase(esp->current_SC, in_the_dark); - switch(esp->cur_msgin[0]) { - default: - /* We don't want to hear about it. */ - ESPLOG(("esp%d: msg %02x which we don't know about\n", esp->esp_id, - esp->cur_msgin[0])); - return MESSAGE_REJECT; - - case NOP: - ESPLOG(("esp%d: target %d sends a nop\n", esp->esp_id, - esp->current_SC->device->id)); - return 0; - - case RESTORE_POINTERS: - /* In this case we might also have to backup the - * "slow command" pointer. It is rare to get such - * a save/restore pointer sequence so early in the - * bus transition sequences, but cover it. - */ - if(esp->esp_slowcmd) { - esp->esp_scmdleft = esp->current_SC->cmd_len; - esp->esp_scmdp = &esp->current_SC->cmnd[0]; - } - esp_restore_pointers(esp, esp->current_SC); - return 0; - - case SAVE_POINTERS: - esp_save_pointers(esp, esp->current_SC); - return 0; - - case COMMAND_COMPLETE: - case DISCONNECT: - /* Freeing the bus, let it go. */ - esp->current_SC->SCp.phase = in_freeing; - return 0; - - case MESSAGE_REJECT: - ESPMISC(("msg reject, ")); - if(esp->prevmsgout == EXTENDED_MESSAGE) { - struct esp_device *esp_dev = esp->current_SC->device->hostdata; - - /* Doesn't look like this target can - * do synchronous or WIDE transfers. - */ - ESPSDTR(("got reject, was trying nego, clearing sync/WIDE\n")); - esp_dev->sync = 1; - esp_dev->wide = 1; - esp_dev->sync_min_period = 0; - esp_dev->sync_max_offset = 0; - return 0; - } else { - ESPMISC(("not sync nego, sending ABORT\n")); - return ABORT; - } - }; -} - -/* Target negotiates for synchronous transfers before we do, this - * is legal although very strange. What is even funnier is that - * the SCSI2 standard specifically recommends against targets doing - * this because so many initiators cannot cope with this occurring. - */ -static int target_with_ants_in_pants(struct NCR_ESP *esp, - Scsi_Cmnd *SCptr, - struct esp_device *esp_dev) -{ - if(esp_dev->sync || SCptr->device->borken) { - /* sorry, no can do */ - ESPSDTR(("forcing to async, ")); - build_sync_nego_msg(esp, 0, 0); - esp_dev->sync = 1; - esp->snip = 1; - ESPLOG(("esp%d: hoping for msgout\n", esp->esp_id)); - esp_advance_phase(SCptr, in_the_dark); - return EXTENDED_MESSAGE; - } - - /* Ok, we'll check them out... */ - return 0; -} - -static void sync_report(struct NCR_ESP *esp) -{ - int msg3, msg4; - char *type; - - msg3 = esp->cur_msgin[3]; - msg4 = esp->cur_msgin[4]; - if(msg4) { - int hz = 1000000000 / (msg3 * 4); - int integer = hz / 1000000; - int fraction = (hz - (integer * 1000000)) / 10000; - if((msg3 * 4) < 200) { - type = "FAST"; - } else { - type = "synchronous"; - } - - /* Do not transform this back into one big printk - * again, it triggers a bug in our sparc64-gcc272 - * sibling call optimization. -DaveM - */ - ESPLOG((KERN_INFO "esp%d: target %d ", - esp->esp_id, esp->current_SC->device->id)); - ESPLOG(("[period %dns offset %d %d.%02dMHz ", - (int) msg3 * 4, (int) msg4, - integer, fraction)); - ESPLOG(("%s SCSI%s]\n", type, - (((msg3 * 4) < 200) ? "-II" : ""))); - } else { - ESPLOG((KERN_INFO "esp%d: target %d asynchronous\n", - esp->esp_id, esp->current_SC->device->id)); - } -} - -static int check_multibyte_msg(struct NCR_ESP *esp, - struct ESP_regs *eregs) -{ - Scsi_Cmnd *SCptr = esp->current_SC; - struct esp_device *esp_dev = SCptr->device->hostdata; - unchar regval = 0; - int message_out = 0; - - ESPSDTR(("chk multibyte msg: ")); - if(esp->cur_msgin[2] == EXTENDED_SDTR) { - int period = esp->cur_msgin[3]; - int offset = esp->cur_msgin[4]; - - ESPSDTR(("is sync nego response, ")); - if(!esp->snip) { - int rval; - - /* Target negotiates first! */ - ESPSDTR(("target jumps the gun, ")); - message_out = EXTENDED_MESSAGE; /* we must respond */ - rval = target_with_ants_in_pants(esp, SCptr, esp_dev); - if(rval) - return rval; - } - - ESPSDTR(("examining sdtr, ")); - - /* Offset cannot be larger than ESP fifo size. */ - if(offset > 15) { - ESPSDTR(("offset too big %2x, ", offset)); - offset = 15; - ESPSDTR(("sending back new offset\n")); - build_sync_nego_msg(esp, period, offset); - return EXTENDED_MESSAGE; - } - - if(offset && period > esp->max_period) { - /* Yeee, async for this slow device. */ - ESPSDTR(("period too long %2x, ", period)); - build_sync_nego_msg(esp, 0, 0); - ESPSDTR(("hoping for msgout\n")); - esp_advance_phase(esp->current_SC, in_the_dark); - return EXTENDED_MESSAGE; - } else if (offset && period < esp->min_period) { - ESPSDTR(("period too short %2x, ", period)); - period = esp->min_period; - if(esp->erev > esp236) - regval = 4; - else - regval = 5; - } else if(offset) { - int tmp; - - ESPSDTR(("period is ok, ")); - tmp = esp->ccycle / 1000; - regval = (((period << 2) + tmp - 1) / tmp); - if(regval && (esp->erev > esp236)) { - if(period >= 50) - regval--; - } - } - - if(offset) { - unchar bit; - - esp_dev->sync_min_period = (regval & 0x1f); - esp_dev->sync_max_offset = (offset | esp->radelay); - if(esp->erev > esp236) { - if(esp->erev == fas100a) - bit = ESP_CONFIG3_FAST; - else - bit = ESP_CONFIG3_FSCSI; - if(period < 50) - esp->config3[SCptr->device->id] |= bit; - else - esp->config3[SCptr->device->id] &= ~bit; - esp->prev_cfg3 = esp->config3[SCptr->device->id]; - esp_write(eregs->esp_cfg3, esp->prev_cfg3); - } - esp->prev_soff = esp_dev->sync_min_period; - esp_write(eregs->esp_soff, esp->prev_soff); - esp->prev_stp = esp_dev->sync_max_offset; - esp_write(eregs->esp_stp, esp->prev_stp); - - ESPSDTR(("soff=%2x stp=%2x cfg3=%2x\n", - esp_dev->sync_max_offset, - esp_dev->sync_min_period, - esp->config3[scmd_id(SCptr)])); - - esp->snip = 0; - } else if(esp_dev->sync_max_offset) { - unchar bit; - - /* back to async mode */ - ESPSDTR(("unaccaptable sync nego, forcing async\n")); - esp_dev->sync_max_offset = 0; - esp_dev->sync_min_period = 0; - esp->prev_soff = 0; - esp_write(eregs->esp_soff, 0); - esp->prev_stp = 0; - esp_write(eregs->esp_stp, 0); - if(esp->erev > esp236) { - if(esp->erev == fas100a) - bit = ESP_CONFIG3_FAST; - else - bit = ESP_CONFIG3_FSCSI; - esp->config3[SCptr->device->id] &= ~bit; - esp->prev_cfg3 = esp->config3[SCptr->device->id]; - esp_write(eregs->esp_cfg3, esp->prev_cfg3); - } - } - - sync_report(esp); - - ESPSDTR(("chk multibyte msg: sync is known, ")); - esp_dev->sync = 1; - - if(message_out) { - ESPLOG(("esp%d: sending sdtr back, hoping for msgout\n", - esp->esp_id)); - build_sync_nego_msg(esp, period, offset); - esp_advance_phase(SCptr, in_the_dark); - return EXTENDED_MESSAGE; - } - - ESPSDTR(("returning zero\n")); - esp_advance_phase(SCptr, in_the_dark); /* ...or else! */ - return 0; - } else if(esp->cur_msgin[2] == EXTENDED_WDTR) { - ESPLOG(("esp%d: AIEEE wide msg received\n", esp->esp_id)); - message_out = MESSAGE_REJECT; - } else if(esp->cur_msgin[2] == EXTENDED_MODIFY_DATA_POINTER) { - ESPLOG(("esp%d: rejecting modify data ptr msg\n", esp->esp_id)); - message_out = MESSAGE_REJECT; - } - esp_advance_phase(SCptr, in_the_dark); - return message_out; -} - -static int esp_do_msgindone(struct NCR_ESP *esp, struct ESP_regs *eregs) -{ - Scsi_Cmnd *SCptr = esp->current_SC; - int message_out = 0, it = 0, rval; - - rval = skipahead1(esp, eregs, SCptr, in_msgin, in_msgindone); - if(rval) - return rval; - if(SCptr->SCp.sent_command != in_status) { - if(!(esp->ireg & ESP_INTR_DC)) { - if(esp->msgin_len && (esp->sreg & ESP_STAT_PERR)) { - message_out = MSG_PARITY_ERROR; - esp_cmd(esp, eregs, ESP_CMD_FLUSH); - } else if((it = (esp_read(eregs->esp_fflags) & ESP_FF_FBYTES))!=1) { - /* We certainly dropped the ball somewhere. */ - message_out = INITIATOR_ERROR; - esp_cmd(esp, eregs, ESP_CMD_FLUSH); - } else if(!esp->msgin_len) { - it = esp_read(eregs->esp_fdata); - esp_advance_phase(SCptr, in_msgincont); - } else { - /* it is ok and we want it */ - it = esp->cur_msgin[esp->msgin_ctr] = - esp_read(eregs->esp_fdata); - esp->msgin_ctr++; - } - } else { - esp_advance_phase(SCptr, in_the_dark); - return do_work_bus; - } - } else { - it = esp->cur_msgin[0]; - } - if(!message_out && esp->msgin_len) { - if(esp->msgin_ctr < esp->msgin_len) { - esp_advance_phase(SCptr, in_msgincont); - } else if(esp->msgin_len == 1) { - message_out = check_singlebyte_msg(esp, eregs); - } else if(esp->msgin_len == 2) { - if(esp->cur_msgin[0] == EXTENDED_MESSAGE) { - if((it+2) >= 15) { - message_out = MESSAGE_REJECT; - } else { - esp->msgin_len = (it + 2); - esp_advance_phase(SCptr, in_msgincont); - } - } else { - message_out = MESSAGE_REJECT; /* foo on you */ - } - } else { - message_out = check_multibyte_msg(esp, eregs); - } - } - if(message_out < 0) { - return -message_out; - } else if(message_out) { - if(((message_out != 1) && - ((message_out < 0x20) || (message_out & 0x80)))) - esp->msgout_len = 1; - esp->cur_msgout[0] = message_out; - esp_cmd(esp, eregs, ESP_CMD_SATN); - esp_advance_phase(SCptr, in_the_dark); - esp->msgin_len = 0; - } - esp->sreg = esp_read(eregs->esp_status); - esp->sreg &= ~(ESP_STAT_INTR); - if((esp->sreg & (ESP_STAT_PMSG|ESP_STAT_PCD)) == (ESP_STAT_PMSG|ESP_STAT_PCD)) - esp_cmd(esp, eregs, ESP_CMD_MOK); - if((SCptr->SCp.sent_command == in_msgindone) && - (SCptr->SCp.phase == in_freeing)) - return esp_do_freebus(esp, eregs); - return do_intr_end; -} - -static int esp_do_cmdbegin(struct NCR_ESP *esp, struct ESP_regs *eregs) -{ - unsigned char tmp; - Scsi_Cmnd *SCptr = esp->current_SC; - - esp_advance_phase(SCptr, in_cmdend); - esp_cmd(esp, eregs, ESP_CMD_FLUSH); - tmp = *esp->esp_scmdp++; - esp->esp_scmdleft--; - esp_write(eregs->esp_fdata, tmp); - esp_cmd(esp, eregs, ESP_CMD_TI); - return do_intr_end; -} - -static int esp_do_cmddone(struct NCR_ESP *esp, struct ESP_regs *eregs) -{ - esp_cmd(esp, eregs, ESP_CMD_NULL); - if(esp->ireg & ESP_INTR_BSERV) { - esp_advance_phase(esp->current_SC, in_the_dark); - return esp_do_phase_determine(esp, eregs); - } - ESPLOG(("esp%d: in do_cmddone() but didn't get BSERV interrupt.\n", - esp->esp_id)); - return do_reset_bus; -} - -static int esp_do_msgout(struct NCR_ESP *esp, struct ESP_regs *eregs) -{ - esp_cmd(esp, eregs, ESP_CMD_FLUSH); - switch(esp->msgout_len) { - case 1: - esp_write(eregs->esp_fdata, esp->cur_msgout[0]); - esp_cmd(esp, eregs, ESP_CMD_TI); - break; - - case 2: - if(esp->do_pio_cmds){ - esp_write(eregs->esp_fdata, esp->cur_msgout[0]); - esp_write(eregs->esp_fdata, esp->cur_msgout[1]); - esp_cmd(esp, eregs, ESP_CMD_TI); - } else { - esp->esp_command[0] = esp->cur_msgout[0]; - esp->esp_command[1] = esp->cur_msgout[1]; - esp->dma_setup(esp, esp->esp_command_dvma, 2, 0); - esp_setcount(eregs, 2); - esp_cmd(esp, eregs, ESP_CMD_DMA | ESP_CMD_TI); - } - break; - - case 4: - esp->snip = 1; - if(esp->do_pio_cmds){ - esp_write(eregs->esp_fdata, esp->cur_msgout[0]); - esp_write(eregs->esp_fdata, esp->cur_msgout[1]); - esp_write(eregs->esp_fdata, esp->cur_msgout[2]); - esp_write(eregs->esp_fdata, esp->cur_msgout[3]); - esp_cmd(esp, eregs, ESP_CMD_TI); - } else { - esp->esp_command[0] = esp->cur_msgout[0]; - esp->esp_command[1] = esp->cur_msgout[1]; - esp->esp_command[2] = esp->cur_msgout[2]; - esp->esp_command[3] = esp->cur_msgout[3]; - esp->dma_setup(esp, esp->esp_command_dvma, 4, 0); - esp_setcount(eregs, 4); - esp_cmd(esp, eregs, ESP_CMD_DMA | ESP_CMD_TI); - } - break; - - case 5: - esp->snip = 1; - if(esp->do_pio_cmds){ - esp_write(eregs->esp_fdata, esp->cur_msgout[0]); - esp_write(eregs->esp_fdata, esp->cur_msgout[1]); - esp_write(eregs->esp_fdata, esp->cur_msgout[2]); - esp_write(eregs->esp_fdata, esp->cur_msgout[3]); - esp_write(eregs->esp_fdata, esp->cur_msgout[4]); - esp_cmd(esp, eregs, ESP_CMD_TI); - } else { - esp->esp_command[0] = esp->cur_msgout[0]; - esp->esp_command[1] = esp->cur_msgout[1]; - esp->esp_command[2] = esp->cur_msgout[2]; - esp->esp_command[3] = esp->cur_msgout[3]; - esp->esp_command[4] = esp->cur_msgout[4]; - esp->dma_setup(esp, esp->esp_command_dvma, 5, 0); - esp_setcount(eregs, 5); - esp_cmd(esp, eregs, ESP_CMD_DMA | ESP_CMD_TI); - } - break; - - default: - /* whoops */ - ESPMISC(("bogus msgout sending NOP\n")); - esp->cur_msgout[0] = NOP; - esp_write(eregs->esp_fdata, esp->cur_msgout[0]); - esp->msgout_len = 1; - esp_cmd(esp, eregs, ESP_CMD_TI); - break; - } - esp_advance_phase(esp->current_SC, in_msgoutdone); - return do_intr_end; -} - -static int esp_do_msgoutdone(struct NCR_ESP *esp, - struct ESP_regs *eregs) -{ - if((esp->msgout_len > 1) && esp->dma_barrier) - esp->dma_barrier(esp); - - if(!(esp->ireg & ESP_INTR_DC)) { - esp_cmd(esp, eregs, ESP_CMD_NULL); - switch(esp->sreg & ESP_STAT_PMASK) { - case ESP_MOP: - /* whoops, parity error */ - ESPLOG(("esp%d: still in msgout, parity error assumed\n", - esp->esp_id)); - if(esp->msgout_len > 1) - esp_cmd(esp, eregs, ESP_CMD_SATN); - esp_advance_phase(esp->current_SC, in_msgout); - return do_work_bus; - - case ESP_DIP: - break; - - default: - if(!fcount(esp, eregs) && - !(((struct esp_device *)esp->current_SC->device->hostdata)->sync_max_offset)) - esp_cmd(esp, eregs, ESP_CMD_FLUSH); - break; - - }; - } - - /* If we sent out a synchronous negotiation message, update - * our state. - */ - if(esp->cur_msgout[2] == EXTENDED_MESSAGE && - esp->cur_msgout[4] == EXTENDED_SDTR) { - esp->snip = 1; /* anal retentiveness... */ - } - - esp->prevmsgout = esp->cur_msgout[0]; - esp->msgout_len = 0; - esp_advance_phase(esp->current_SC, in_the_dark); - return esp_do_phase_determine(esp, eregs); -} - -static int esp_bus_unexpected(struct NCR_ESP *esp, struct ESP_regs *eregs) -{ - ESPLOG(("esp%d: command in weird state %2x\n", - esp->esp_id, esp->current_SC->SCp.phase)); - return do_reset_bus; -} - -static espfunc_t bus_vector[] = { - esp_do_data_finale, - esp_do_data_finale, - esp_bus_unexpected, - esp_do_msgin, - esp_do_msgincont, - esp_do_msgindone, - esp_do_msgout, - esp_do_msgoutdone, - esp_do_cmdbegin, - esp_do_cmddone, - esp_do_status, - esp_do_freebus, - esp_do_phase_determine, - esp_bus_unexpected, - esp_bus_unexpected, - esp_bus_unexpected, -}; - -/* This is the second tier in our dual-level SCSI state machine. */ -static int esp_work_bus(struct NCR_ESP *esp, struct ESP_regs *eregs) -{ - Scsi_Cmnd *SCptr = esp->current_SC; - unsigned int phase; - - ESPBUS(("esp_work_bus: ")); - if(!SCptr) { - ESPBUS(("reconnect\n")); - return esp_do_reconnect(esp, eregs); - } - phase = SCptr->SCp.phase; - if ((phase & 0xf0) == in_phases_mask) - return bus_vector[(phase & 0x0f)](esp, eregs); - else if((phase & 0xf0) == in_slct_mask) - return esp_select_complete(esp, eregs); - else - return esp_bus_unexpected(esp, eregs); -} - -static espfunc_t isvc_vector[] = { - NULL, - esp_do_phase_determine, - esp_do_resetbus, - esp_finish_reset, - esp_work_bus -}; - -/* Main interrupt handler for an esp adapter. */ -void esp_handle(struct NCR_ESP *esp) -{ - struct ESP_regs *eregs; - Scsi_Cmnd *SCptr; - int what_next = do_intr_end; - eregs = esp->eregs; - SCptr = esp->current_SC; - - if(esp->dma_irq_entry) - esp->dma_irq_entry(esp); - - /* Check for errors. */ - esp->sreg = esp_read(eregs->esp_status); - esp->sreg &= (~ESP_STAT_INTR); - esp->seqreg = (esp_read(eregs->esp_sstep) & ESP_STEP_VBITS); - esp->ireg = esp_read(eregs->esp_intrpt); /* Unlatch intr and stat regs */ - ESPIRQ(("handle_irq: [sreg<%02x> sstep<%02x> ireg<%02x>]\n", - esp->sreg, esp->seqreg, esp->ireg)); - if(esp->sreg & (ESP_STAT_SPAM)) { - /* Gross error, could be due to one of: - * - * - top of fifo overwritten, could be because - * we tried to do a synchronous transfer with - * an offset greater than ESP fifo size - * - * - top of command register overwritten - * - * - DMA setup to go in one direction, SCSI - * bus points in the other, whoops - * - * - weird phase change during asynchronous - * data phase while we are initiator - */ - ESPLOG(("esp%d: Gross error sreg=%2x\n", esp->esp_id, esp->sreg)); - - /* If a command is live on the bus we cannot safely - * reset the bus, so we'll just let the pieces fall - * where they may. Here we are hoping that the - * target will be able to cleanly go away soon - * so we can safely reset things. - */ - if(!SCptr) { - ESPLOG(("esp%d: No current cmd during gross error, " - "resetting bus\n", esp->esp_id)); - what_next = do_reset_bus; - goto state_machine; - } - } - - /* No current cmd is only valid at this point when there are - * commands off the bus or we are trying a reset. - */ - if(!SCptr && !esp->disconnected_SC && !(esp->ireg & ESP_INTR_SR)) { - /* Panic is safe, since current_SC is null. */ - ESPLOG(("esp%d: no command in esp_handle()\n", esp->esp_id)); - panic("esp_handle: current_SC == penguin within interrupt!"); - } - - if(esp->ireg & (ESP_INTR_IC)) { - /* Illegal command fed to ESP. Outside of obvious - * software bugs that could cause this, there is - * a condition with ESP100 where we can confuse the - * ESP into an erroneous illegal command interrupt - * because it does not scrape the FIFO properly - * for reselection. See esp100_reconnect_hwbug() - * to see how we try very hard to avoid this. - */ - ESPLOG(("esp%d: invalid command\n", esp->esp_id)); - - esp_dump_state(esp, eregs); - - if(SCptr) { - /* Devices with very buggy firmware can drop BSY - * during a scatter list interrupt when using sync - * mode transfers. We continue the transfer as - * expected, the target drops the bus, the ESP - * gets confused, and we get a illegal command - * interrupt because the bus is in the disconnected - * state now and ESP_CMD_TI is only allowed when - * a nexus is alive on the bus. - */ - ESPLOG(("esp%d: Forcing async and disabling disconnect for " - "target %d\n", esp->esp_id, SCptr->device->id)); - SCptr->device->borken = 1; /* foo on you */ - } - - what_next = do_reset_bus; - } else if(!(esp->ireg & ~(ESP_INTR_FDONE | ESP_INTR_BSERV | ESP_INTR_DC))) { - int phase; - - if(SCptr) { - phase = SCptr->SCp.phase; - if(phase & in_phases_mask) { - what_next = esp_work_bus(esp, eregs); - } else if(phase & in_slct_mask) { - what_next = esp_select_complete(esp, eregs); - } else { - ESPLOG(("esp%d: interrupt for no good reason...\n", - esp->esp_id)); - what_next = do_intr_end; - } - } else { - ESPLOG(("esp%d: BSERV or FDONE or DC while SCptr==NULL\n", - esp->esp_id)); - what_next = do_reset_bus; - } - } else if(esp->ireg & ESP_INTR_SR) { - ESPLOG(("esp%d: SCSI bus reset interrupt\n", esp->esp_id)); - what_next = do_reset_complete; - } else if(esp->ireg & (ESP_INTR_S | ESP_INTR_SATN)) { - ESPLOG(("esp%d: AIEEE we have been selected by another initiator!\n", - esp->esp_id)); - what_next = do_reset_bus; - } else if(esp->ireg & ESP_INTR_RSEL) { - if(!SCptr) { - /* This is ok. */ - what_next = esp_do_reconnect(esp, eregs); - } else if(SCptr->SCp.phase & in_slct_mask) { - /* Only selection code knows how to clean - * up properly. - */ - ESPDISC(("Reselected during selection attempt\n")); - what_next = esp_select_complete(esp, eregs); - } else { - ESPLOG(("esp%d: Reselected while bus is busy\n", - esp->esp_id)); - what_next = do_reset_bus; - } - } - - /* This is tier-one in our dual level SCSI state machine. */ -state_machine: - while(what_next != do_intr_end) { - if (what_next >= do_phase_determine && - what_next < do_intr_end) - what_next = isvc_vector[what_next](esp, eregs); - else { - /* state is completely lost ;-( */ - ESPLOG(("esp%d: interrupt engine loses state, resetting bus\n", - esp->esp_id)); - what_next = do_reset_bus; - } - } - if(esp->dma_irq_exit) - esp->dma_irq_exit(esp); -} -EXPORT_SYMBOL(esp_handle); - -#ifndef CONFIG_SMP -irqreturn_t esp_intr(int irq, void *dev_id) -{ - struct NCR_ESP *esp; - unsigned long flags; - int again; - struct Scsi_Host *dev = dev_id; - - /* Handle all ESP interrupts showing at this IRQ level. */ - spin_lock_irqsave(dev->host_lock, flags); -repeat: - again = 0; - for_each_esp(esp) { -#ifndef __mips__ - if(((esp)->irq & 0xff) == irq) { -#endif - if(esp->dma_irq_p(esp)) { - again = 1; - - esp->dma_ints_off(esp); - - ESPIRQ(("I%d(", esp->esp_id)); - esp_handle(esp); - ESPIRQ((")")); - - esp->dma_ints_on(esp); - } -#ifndef __mips__ - } -#endif - } - if(again) - goto repeat; - spin_unlock_irqrestore(dev->host_lock, flags); - return IRQ_HANDLED; -} -#else -/* For SMP we only service one ESP on the list list at our IRQ level! */ -irqreturn_t esp_intr(int irq, void *dev_id) -{ - struct NCR_ESP *esp; - unsigned long flags; - struct Scsi_Host *dev = dev_id; - - /* Handle all ESP interrupts showing at this IRQ level. */ - spin_lock_irqsave(dev->host_lock, flags); - for_each_esp(esp) { - if(((esp)->irq & 0xf) == irq) { - if(esp->dma_irq_p(esp)) { - esp->dma_ints_off(esp); - - ESPIRQ(("I[%d:%d](", - smp_processor_id(), esp->esp_id)); - esp_handle(esp); - ESPIRQ((")")); - - esp->dma_ints_on(esp); - goto out; - } - } - } -out: - spin_unlock_irqrestore(dev->host_lock, flags); - return IRQ_HANDLED; -} -#endif - -int esp_slave_alloc(struct scsi_device *SDptr) -{ - struct esp_device *esp_dev = - kzalloc(sizeof(struct esp_device), GFP_ATOMIC); - - if (!esp_dev) - return -ENOMEM; - SDptr->hostdata = esp_dev; - return 0; -} - -void esp_slave_destroy(struct scsi_device *SDptr) -{ - struct NCR_ESP *esp = (struct NCR_ESP *) SDptr->host->hostdata; - - esp->targets_present &= ~(1 << sdev_id(SDptr)); - kfree(SDptr->hostdata); - SDptr->hostdata = NULL; -} - -#ifdef MODULE -int init_module(void) { return 0; } -void cleanup_module(void) {} -void esp_release(void) -{ - esps_in_use--; - esps_running = esps_in_use; -} -EXPORT_SYMBOL(esp_release); -#endif - -EXPORT_SYMBOL(esp_abort); -EXPORT_SYMBOL(esp_allocate); -EXPORT_SYMBOL(esp_deallocate); -EXPORT_SYMBOL(esp_initialize); -EXPORT_SYMBOL(esp_intr); -EXPORT_SYMBOL(esp_queue); -EXPORT_SYMBOL(esp_reset); -EXPORT_SYMBOL(esp_slave_alloc); -EXPORT_SYMBOL(esp_slave_destroy); -EXPORT_SYMBOL(esps_in_use); - -MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/NCR53C9x.h b/drivers/scsi/NCR53C9x.h deleted file mode 100644 index 00a0ba040db..00000000000 --- a/drivers/scsi/NCR53C9x.h +++ /dev/null @@ -1,668 +0,0 @@ -/* NCR53C9x.c: Defines and structures for the NCR53C9x generic driver. - * - * Originally esp.h: Defines and structures for the Sparc ESP - * (Enhanced SCSI Processor) driver under Linux. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * - * Generalization by Jesper Skov (jskov@cygnus.co.uk) - * - * More generalization (for i386 stuff) by Tymm Twillman (tymm@computer.org) - */ - -#ifndef NCR53C9X_H -#define NCR53C9X_H - -#include <linux/interrupt.h> - -/* djweis for mac driver */ -#if defined(CONFIG_MAC) -#define PAD_SIZE 15 -#else -#define PAD_SIZE 3 -#endif - -/* Handle multiple hostadapters on Amiga - * generally PAD_SIZE = 3 - * but there is one exception: Oktagon (PAD_SIZE = 1) */ -#if defined(CONFIG_OKTAGON_SCSI) || defined(CONFIG_OKTAGON_SCSI_MODULE) -#undef PAD_SIZE -#if defined(CONFIG_BLZ1230_SCSI) || defined(CONFIG_BLZ1230_SCSI_MODULE) || \ - defined(CONFIG_BLZ2060_SCSI) || defined(CONFIG_BLZ2060_SCSI_MODULE) || \ - defined(CONFIG_CYBERSTORM_SCSI) || defined(CONFIG_CYBERSTORM_SCSI_MODULE) || \ - defined(CONFIG_CYBERSTORMII_SCSI) || defined(CONFIG_CYBERSTORMII_SCSI_MODULE) || \ - defined(CONFIG_FASTLANE_SCSI) || defined(CONFIG_FASTLANE_SCSI_MODULE) -#define MULTIPLE_PAD_SIZES -#else -#define PAD_SIZE 1 -#endif -#endif - -/* Macros for debugging messages */ - -#define DEBUG_ESP -/* #define DEBUG_ESP_DATA */ -/* #define DEBUG_ESP_QUEUE */ -/* #define DEBUG_ESP_DISCONNECT */ -/* #define DEBUG_ESP_STATUS */ -/* #define DEBUG_ESP_PHASES */ -/* #define DEBUG_ESP_WORKBUS */ -/* #define DEBUG_STATE_MACHINE */ -/* #define DEBUG_ESP_CMDS */ -/* #define DEBUG_ESP_IRQS */ -/* #define DEBUG_SDTR */ -/* #define DEBUG_ESP_SG */ - -/* Use the following to sprinkle debugging messages in a way which - * suits you if combinations of the above become too verbose when - * trying to track down a specific problem. - */ -/* #define DEBUG_ESP_MISC */ - -#if defined(DEBUG_ESP) -#define ESPLOG(foo) printk foo -#else -#define ESPLOG(foo) -#endif /* (DEBUG_ESP) */ - -#if defined(DEBUG_ESP_DATA) -#define ESPDATA(foo) printk foo -#else -#define ESPDATA(foo) -#endif - -#if defined(DEBUG_ESP_QUEUE) -#define ESPQUEUE(foo) printk foo -#else -#define ESPQUEUE(foo) -#endif - -#if defined(DEBUG_ESP_DISCONNECT) -#define ESPDISC(foo) printk foo -#else -#define ESPDISC(foo) -#endif - -#if defined(DEBUG_ESP_STATUS) -#define ESPSTAT(foo) printk foo -#else -#define ESPSTAT(foo) -#endif - -#if defined(DEBUG_ESP_PHASES) -#define ESPPHASE(foo) printk foo -#else -#define ESPPHASE(foo) -#endif - -#if defined(DEBUG_ESP_WORKBUS) -#define ESPBUS(foo) printk foo -#else -#define ESPBUS(foo) -#endif - -#if defined(DEBUG_ESP_IRQS) -#define ESPIRQ(foo) printk foo -#else -#define ESPIRQ(foo) -#endif - -#if defined(DEBUG_SDTR) -#define ESPSDTR(foo) printk foo -#else -#define ESPSDTR(foo) -#endif - -#if defined(DEBUG_ESP_MISC) -#define ESPMISC(foo) printk foo -#else -#define ESPMISC(foo) -#endif - -/* - * padding for register structure - */ -#ifdef CONFIG_JAZZ_ESP -#define EREGS_PAD(n) -#else -#ifndef MULTIPLE_PAD_SIZES -#define EREGS_PAD(n) unchar n[PAD_SIZE]; -#endif -#endif - -/* The ESP SCSI controllers have their register sets in three - * "classes": - * - * 1) Registers which are both read and write. - * 2) Registers which are read only. - * 3) Registers which are write only. - * - * Yet, they all live within the same IO space. - */ - -#if !defined(__i386__) && !defined(__x86_64__) - -#ifndef MULTIPLE_PAD_SIZES - -#ifdef CONFIG_CPU_HAS_WB -#include <asm/wbflush.h> -#define esp_write(__reg, __val) do{(__reg) = (__val); wbflush();} while(0) -#else -#define esp_write(__reg, __val) ((__reg) = (__val)) -#endif -#define esp_read(__reg) (__reg) - -struct ESP_regs { - /* Access Description Offset */ - volatile unchar esp_tclow; /* rw Low bits of the transfer count 0x00 */ - EREGS_PAD(tlpad1); - volatile unchar esp_tcmed; /* rw Mid bits of the transfer count 0x04 */ - EREGS_PAD(fdpad); - volatile unchar esp_fdata; /* rw FIFO data bits 0x08 */ - EREGS_PAD(cbpad); - volatile unchar esp_cmnd; /* rw SCSI command bits 0x0c */ - EREGS_PAD(stpad); - volatile unchar esp_status; /* ro ESP status register 0x10 */ -#define esp_busid esp_status /* wo Bus ID for select/reselect 0x10 */ - EREGS_PAD(irqpd); - volatile unchar esp_intrpt; /* ro Kind of interrupt 0x14 */ -#define esp_timeo esp_intrpt /* wo Timeout value for select/resel 0x14 */ - EREGS_PAD(sspad); - volatile unchar esp_sstep; /* ro Sequence step register 0x18 */ -#define esp_stp esp_sstep /* wo Transfer period per sync 0x18 */ - EREGS_PAD(ffpad); - volatile unchar esp_fflags; /* ro Bits of current FIFO info 0x1c */ -#define esp_soff esp_fflags /* wo Sync offset 0x1c */ - EREGS_PAD(cf1pd); - volatile unchar esp_cfg1; /* rw First configuration register 0x20 */ - EREGS_PAD(cfpad); - volatile unchar esp_cfact; /* wo Clock conversion factor 0x24 */ - EREGS_PAD(ctpad); - volatile unchar esp_ctest; /* wo Chip test register 0x28 */ - EREGS_PAD(cf2pd); - volatile unchar esp_cfg2; /* rw Second configuration register 0x2c */ - EREGS_PAD(cf3pd); - - /* The following is only found on the 53C9X series SCSI chips */ - volatile unchar esp_cfg3; /* rw Third configuration register 0x30 */ - EREGS_PAD(cf4pd); - volatile unchar esp_cfg4; /* rw Fourth configuration register 0x34 */ - EREGS_PAD(thpd); - /* The following is found on all chips except the NCR53C90 (ESP100) */ - volatile unchar esp_tchi; /* rw High bits of transfer count 0x38 */ -#define esp_uid esp_tchi /* ro Unique ID code 0x38 */ - EREGS_PAD(fgpad); - volatile unchar esp_fgrnd; /* rw Data base for fifo 0x3c */ -}; - -#else /* MULTIPLE_PAD_SIZES */ - -#define esp_write(__reg, __val) (*(__reg) = (__val)) -#define esp_read(__reg) (*(__reg)) - -struct ESP_regs { - unsigned char io_addr[64]; /* dummy */ - /* Access Description Offset */ -#define esp_tclow io_addr /* rw Low bits of the transfer count 0x00 */ -#define esp_tcmed io_addr + (1<<(esp->shift)) /* rw Mid bits of the transfer count 0x04 */ -#define esp_fdata io_addr + (2<<(esp->shift)) /* rw FIFO data bits 0x08 */ -#define esp_cmnd io_addr + (3<<(esp->shift)) /* rw SCSI command bits 0x0c */ -#define esp_status io_addr + (4<<(esp->shift)) /* ro ESP status register 0x10 */ -#define esp_busid esp_status /* wo Bus ID for select/reselect 0x10 */ -#define esp_intrpt io_addr + (5<<(esp->shift)) /* ro Kind of interrupt 0x14 */ -#define esp_timeo esp_intrpt /* wo Timeout value for select/resel 0x14 */ -#define esp_sstep io_addr + (6<<(esp->shift)) /* ro Sequence step register 0x18 */ -#define esp_stp esp_sstep /* wo Transfer period per sync 0x18 */ -#define esp_fflags io_addr + (7<<(esp->shift)) /* ro Bits of current FIFO info 0x1c */ -#define esp_soff esp_fflags /* wo Sync offset 0x1c */ -#define esp_cfg1 io_addr + (8<<(esp->shift)) /* rw First configuration register 0x20 */ -#define esp_cfact io_addr + (9<<(esp->shift)) /* wo Clock conversion factor 0x24 */ -#define esp_ctest io_addr + (10<<(esp->shift)) /* wo Chip test register 0x28 */ -#define esp_cfg2 io_addr + (11<<(esp->shift)) /* rw Second configuration register 0x2c */ - - /* The following is only found on the 53C9X series SCSI chips */ -#define esp_cfg3 io_addr + (12<<(esp->shift)) /* rw Third configuration register 0x30 */ -#define esp_cfg4 io_addr + (13<<(esp->shift)) /* rw Fourth configuration register 0x34 */ - - /* The following is found on all chips except the NCR53C90 (ESP100) */ -#define esp_tchi io_addr + (14<<(esp->shift)) /* rw High bits of transfer count 0x38 */ -#define esp_uid esp_tchi /* ro Unique ID code 0x38 */ -#define esp_fgrnd io_addr + (15<<(esp->shift)) /* rw Data base for fifo 0x3c */ -}; - -#endif - -#else /* !defined(__i386__) && !defined(__x86_64__) */ - -#define esp_write(__reg, __val) outb((__val), (__reg)) -#define esp_read(__reg) inb((__reg)) - -struct ESP_regs { - unsigned int io_addr; - /* Access Description Offset */ -#define esp_tclow io_addr /* rw Low bits of the transfer count 0x00 */ -#define esp_tcmed io_addr + 1 /* rw Mid bits of the transfer count 0x04 */ -#define esp_fdata io_addr + 2 /* rw FIFO data bits 0x08 */ -#define esp_cmnd io_addr + 3 /* rw SCSI command bits 0x0c */ -#define esp_status io_addr + 4 /* ro ESP status register 0x10 */ -#define esp_busid esp_status /* wo Bus ID for select/reselect 0x10 */ -#define esp_intrpt io_addr + 5 /* ro Kind of interrupt 0x14 */ -#define esp_timeo esp_intrpt /* wo Timeout value for select/resel 0x14 */ -#define esp_sstep io_addr + 6 /* ro Sequence step register 0x18 */ -#define esp_stp esp_sstep /* wo Transfer period per sync 0x18 */ -#define esp_fflags io_addr + 7 /* ro Bits of current FIFO info 0x1c */ -#define esp_soff esp_fflags /* wo Sync offset 0x1c */ -#define esp_cfg1 io_addr + 8 /* rw First configuration register 0x20 */ -#define esp_cfact io_addr + 9 /* wo Clock conversion factor 0x24 */ -#define esp_ctest io_addr + 10 /* wo Chip test register 0x28 */ -#define esp_cfg2 io_addr + 11 /* rw Second configuration register 0x2c */ - - /* The following is only found on the 53C9X series SCSI chips */ -#define esp_cfg3 io_addr + 12 /* rw Third configuration register 0x30 */ -#define esp_cfg4 io_addr + 13 /* rw Fourth configuration register 0x34 */ - - /* The following is found on all chips except the NCR53C90 (ESP100) */ -#define esp_tchi io_addr + 14 /* rw High bits of transfer count 0x38 */ -#define esp_uid esp_tchi /* ro Unique ID code 0x38 */ -#define esp_fgrnd io_addr + 15 /* rw Data base for fifo 0x3c */ -}; - -#endif /* !defined(__i386__) && !defined(__x86_64__) */ - -/* Various revisions of the ESP board. */ -enum esp_rev { - esp100 = 0x00, /* NCR53C90 - very broken */ - esp100a = 0x01, /* NCR53C90A */ - esp236 = 0x02, - fas236 = 0x03, - fas100a = 0x04, - fast = 0x05, - fas366 = 0x06, - fas216 = 0x07, - fsc = 0x08, /* SYM53C94-2 */ - espunknown = 0x09 -}; - -/* We allocate one of these for each scsi device and attach it to - * SDptr->hostdata for use in the driver - */ -struct esp_device { - unsigned char sync_min_period; - unsigned char sync_max_offset; - unsigned sync:1; - unsigned wide:1; - unsigned disconnect:1; -}; - -/* We get one of these for each ESP probed. */ -struct NCR_ESP { - struct NCR_ESP *next; /* Next ESP on probed or NULL */ - struct ESP_regs *eregs; /* All esp registers */ - int dma; /* Who I do transfers with. */ - void *dregs; /* And his registers. */ - struct Scsi_Host *ehost; /* Backpointer to SCSI Host */ - - void *edev; /* Pointer to controller base/SBus */ - int esp_id; /* Unique per-ESP ID number */ - - /* ESP Configuration Registers */ - unsigned char config1; /* Copy of the 1st config register */ - unsigned char config2; /* Copy of the 2nd config register */ - unsigned char config3[16]; /* Copy of the 3rd config register */ - - /* The current command we are sending to the ESP chip. This esp_command - * ptr needs to be mapped in DVMA area so we can send commands and read - * from the ESP fifo without burning precious CPU cycles. Programmed I/O - * sucks when we have the DVMA to do it for us. The ESP is stupid and will - * only send out 6, 10, and 12 byte SCSI commands, others we need to send - * one byte at a time. esp_slowcmd being set says that we are doing one - * of the command types ESP doesn't understand, esp_scmdp keeps track of - * which byte we are sending, esp_scmdleft says how many bytes to go. - */ - volatile unchar *esp_command; /* Location of command (CPU view) */ - __u32 esp_command_dvma; /* Location of command (DVMA view) */ - unsigned char esp_clen; /* Length of this command */ - unsigned char esp_slowcmd; - unsigned char *esp_scmdp; - unsigned char esp_scmdleft; - - /* The following are used to determine the cause of an IRQ. Upon every - * IRQ entry we synchronize these with the hardware registers. - */ - unchar ireg; /* Copy of ESP interrupt register */ - unchar sreg; /* Same for ESP status register */ - unchar seqreg; /* The ESP sequence register */ - - /* The following is set when a premature interrupt condition is detected - * in some FAS revisions. - */ - unchar fas_premature_intr_workaround; - - /* To save register writes to the ESP, which can be expensive, we - * keep track of the previous value that various registers had for - * the last target we connected to. If they are the same for the - * current target, we skip the register writes as they are not needed. - */ - unchar prev_soff, prev_stp, prev_cfg3; - - /* For each target we keep track of save/restore data - * pointer information. This needs to be updated majorly - * when we add support for tagged queueing. -DaveM - */ - struct esp_pointers { - char *saved_ptr; - struct scatterlist *saved_buffer; - int saved_this_residual; - int saved_buffers_residual; - } data_pointers[16] /*XXX [MAX_TAGS_PER_TARGET]*/; - - /* Clock periods, frequencies, synchronization, etc. */ - unsigned int cfreq; /* Clock frequency in HZ */ - unsigned int cfact; /* Clock conversion factor */ - unsigned int ccycle; /* One ESP clock cycle */ - unsigned int ctick; /* One ESP clock time */ - unsigned int radelay; /* FAST chip req/ack delay */ - unsigned int neg_defp; /* Default negotiation period */ - unsigned int sync_defp; /* Default sync transfer period */ - unsigned int max_period; /* longest our period can be */ - unsigned int min_period; /* shortest period we can withstand */ - /* For slow to medium speed input clock rates we shoot for 5mb/s, - * but for high input clock rates we try to do 10mb/s although I - * don't think a transfer can even run that fast with an ESP even - * with DMA2 scatter gather pipelining. - */ -#define SYNC_DEFP_SLOW 0x32 /* 5mb/s */ -#define SYNC_DEFP_FAST 0x19 /* 10mb/s */ - - unsigned int snip; /* Sync. negotiation in progress */ - unsigned int wnip; /* WIDE negotiation in progress */ - unsigned int targets_present; /* targets spoken to before */ - - int current_transfer_size; /* Set at beginning of data dma */ - - unchar espcmdlog[32]; /* Log of current esp cmds sent. */ - unchar espcmdent; /* Current entry in esp cmd log. */ - - /* Misc. info about this ESP */ - enum esp_rev erev; /* ESP revision */ - int irq; /* IRQ for this ESP */ - int scsi_id; /* Who am I as initiator? */ - int scsi_id_mask; /* Bitmask of 'me'. */ - int diff; /* Differential SCSI bus? */ - int slot; /* Slot the adapter occupies */ - - /* Our command queues, only one cmd lives in the current_SC queue. */ - Scsi_Cmnd *issue_SC; /* Commands to be issued */ - Scsi_Cmnd *current_SC; /* Who is currently working the bus */ - Scsi_Cmnd *disconnected_SC; /* Commands disconnected from the bus */ - - /* Message goo */ - unchar cur_msgout[16]; - unchar cur_msgin[16]; - unchar prevmsgout, prevmsgin; - unchar msgout_len, msgin_len; - unchar msgout_ctr, msgin_ctr; - - /* States that we cannot keep in the per cmd structure because they - * cannot be assosciated with any specific command. - */ - unchar resetting_bus; - wait_queue_head_t reset_queue; - - unchar do_pio_cmds; /* Do command transfer with pio */ - - /* How much bits do we have to shift the registers */ - unsigned char shift; - - /* Functions handling DMA - */ - /* Required functions */ - int (*dma_bytes_sent)(struct NCR_ESP *, int); - int (*dma_can_transfer)(struct NCR_ESP *, Scsi_Cmnd *); - void (*dma_dump_state)(struct NCR_ESP *); - void (*dma_init_read)(struct NCR_ESP *, __u32, int); - void (*dma_init_write)(struct NCR_ESP *, __u32, int); - void (*dma_ints_off)(struct NCR_ESP *); - void (*dma_ints_on)(struct NCR_ESP *); - int (*dma_irq_p)(struct NCR_ESP *); - int (*dma_ports_p)(struct NCR_ESP *); - void (*dma_setup)(struct NCR_ESP *, __u32, int, int); - - /* Optional functions (i.e. may be initialized to 0) */ - void (*dma_barrier)(struct NCR_ESP *); - void (*dma_drain)(struct NCR_ESP *); - void (*dma_invalidate)(struct NCR_ESP *); - void (*dma_irq_entry)(struct NCR_ESP *); - void (*dma_irq_exit)(struct NCR_ESP *); - void (*dma_led_off)(struct NCR_ESP *); - void (*dma_led_on)(struct NCR_ESP *); - void (*dma_poll)(struct NCR_ESP *, unsigned char *); - void (*dma_reset)(struct NCR_ESP *); - - /* Optional virtual DMA functions */ - void (*dma_mmu_get_scsi_one)(struct NCR_ESP *, Scsi_Cmnd *); - void (*dma_mmu_get_scsi_sgl)(struct NCR_ESP *, Scsi_Cmnd *); - void (*dma_mmu_release_scsi_one)(struct NCR_ESP *, Scsi_Cmnd *); - void (*dma_mmu_release_scsi_sgl)(struct NCR_ESP *, Scsi_Cmnd *); - void (*dma_advance_sg)(Scsi_Cmnd *); -}; - -/* Bitfield meanings for the above registers. */ - -/* ESP config reg 1, read-write, found on all ESP chips */ -#define ESP_CONFIG1_ID 0x07 /* My BUS ID bits */ -#define ESP_CONFIG1_CHTEST 0x08 /* Enable ESP chip tests */ -#define ESP_CONFIG1_PENABLE 0x10 /* Enable parity checks */ -#define ESP_CONFIG1_PARTEST 0x20 /* Parity test mode enabled? */ -#define ESP_CONFIG1_SRRDISAB 0x40 /* Disable SCSI reset reports */ -#define ESP_CONFIG1_SLCABLE 0x80 /* Enable slow cable mode */ - -/* ESP config reg 2, read-write, found only on esp100a+esp200+esp236+fsc chips */ -#define ESP_CONFIG2_DMAPARITY 0x01 /* enable DMA Parity (200,236,fsc) */ -#define ESP_CONFIG2_REGPARITY 0x02 /* enable reg Parity (200,236,fsc) */ -#define ESP_CONFIG2_BADPARITY 0x04 /* Bad parity target abort */ -#define ESP_CONFIG2_SCSI2ENAB 0x08 /* Enable SCSI-2 features (tmode only) */ -#define ESP_CONFIG2_HI 0x10 /* High Impedance DREQ ??? */ -#define ESP_CONFIG2_HMEFENAB 0x10 /* HME features enable */ -#define ESP_CONFIG2_BCM 0x20 /* Enable byte-ctrl (236,fsc) */ -#define ESP_CONFIG2_FENAB 0x40 /* Enable features (fas100,esp216,fsc) */ -#define ESP_CONFIG2_SPL 0x40 /* Enable status-phase latch (esp236) */ -#define ESP_CONFIG2_RFB 0x80 /* Reserve FIFO byte (fsc) */ -#define ESP_CONFIG2_MAGIC 0xe0 /* Invalid bits... */ - -/* ESP config register 3 read-write, found only esp236+fas236+fas100a+fsc chips */ -#define ESP_CONFIG3_FCLOCK 0x01 /* FAST SCSI clock rate (esp100a/fas366) */ -#define ESP_CONFIG3_TEM 0x01 /* Enable thresh-8 mode (esp/fas236/fsc) */ -#define ESP_CONFIG3_FAST 0x02 /* Enable FAST SCSI (esp100a) */ -#define ESP_CONFIG3_ADMA 0x02 /* Enable alternate-dma (esp/fas236/fsc) */ -#define ESP_CONFIG3_TENB 0x04 /* group2 SCSI2 support (esp100a) */ -#define ESP_CONFIG3_SRB 0x04 /* Save residual byte (esp/fas236/fsc) */ -#define ESP_CONFIG3_TMS 0x08 /* Three-byte msg's ok (esp100a) */ -#define ESP_CONFIG3_FCLK 0x08 /* Fast SCSI clock rate (esp/fas236/fsc) */ -#define ESP_CONFIG3_IDMSG 0x10 /* ID message checking (esp100a) */ -#define ESP_CONFIG3_FSCSI 0x10 /* Enable FAST SCSI (esp/fas236/fsc) */ -#define ESP_CONFIG3_GTM 0x20 /* group2 SCSI2 support (esp/fas236/fsc) */ -#define ESP_CONFIG3_TBMS 0x40 /* Three-byte msg's ok (esp/fas236/fsc) */ -#define ESP_CONFIG3_IMS 0x80 /* ID msg chk'ng (esp/fas236/fsc) */ - -/* ESP config register 4 read-write, found only on fsc chips */ -#define ESP_CONFIG4_BBTE 0x01 /* Back-to-Back transfer enable */ -#define ESP_CONFIG4_TEST 0x02 /* Transfer counter test mode */ -#define ESP_CONFIG4_EAN 0x04 /* Enable Active Negotiation */ - -/* ESP command register read-write */ -/* Group 1 commands: These may be sent at any point in time to the ESP - * chip. None of them can generate interrupts 'cept - * the "SCSI bus reset" command if you have not disabled - * SCSI reset interrupts in the config1 ESP register. - */ -#define ESP_CMD_NULL 0x00 /* Null command, ie. a nop */ -#define ESP_CMD_FLUSH 0x01 /* FIFO Flush */ -#define ESP_CMD_RC 0x02 /* Chip reset */ -#define ESP_CMD_RS 0x03 /* SCSI bus reset */ - -/* Group 2 commands: ESP must be an initiator and connected to a target - * for these commands to work. - */ -#define ESP_CMD_TI 0x10 /* Transfer Information */ -#define ESP_CMD_ICCSEQ 0x11 /* Initiator cmd complete sequence */ -#define ESP_CMD_MOK 0x12 /* Message okie-dokie */ -#define ESP_CMD_TPAD 0x18 /* Transfer Pad */ -#define ESP_CMD_SATN 0x1a /* Set ATN */ -#define ESP_CMD_RATN 0x1b /* De-assert ATN */ - -/* Group 3 commands: ESP must be in the MSGOUT or MSGIN state and be connected - * to a target as the initiator for these commands to work. - */ -#define ESP_CMD_SMSG 0x20 /* Send message */ -#define ESP_CMD_SSTAT 0x21 /* Send status */ -#define ESP_CMD_SDATA 0x22 /* Send data */ -#define ESP_CMD_DSEQ 0x23 /* Discontinue Sequence */ -#define ESP_CMD_TSEQ 0x24 /* Terminate Sequence */ -#define ESP_CMD_TCCSEQ 0x25 /* Target cmd cmplt sequence */ -#define ESP_CMD_DCNCT 0x27 /* Disconnect */ -#define ESP_CMD_RMSG 0x28 /* Receive Message */ -#define ESP_CMD_RCMD 0x29 /* Receive Command */ -#define ESP_CMD_RDATA 0x2a /* Receive Data */ -#define ESP_CMD_RCSEQ 0x2b /* Receive cmd sequence */ - -/* Group 4 commands: The ESP must be in the disconnected state and must - * not be connected to any targets as initiator for - * these commands to work. - */ -#define ESP_CMD_RSEL 0x40 /* Reselect */ -#define ESP_CMD_SEL 0x41 /* Select w/o ATN */ -#define ESP_CMD_SELA 0x42 /* Select w/ATN */ -#define ESP_CMD_SELAS 0x43 /* Select w/ATN & STOP */ -#define ESP_CMD_ESEL 0x44 /* Enable selection */ -#define ESP_CMD_DSEL 0x45 /* Disable selections */ -#define ESP_CMD_SA3 0x46 /* Select w/ATN3 */ -#define ESP_CMD_RSEL3 0x47 /* Reselect3 */ - -/* This bit enables the ESP's DMA */ -#define ESP_CMD_DMA 0x80 /* Do DMA? */ - -/* ESP status register read-only */ -#define ESP_STAT_PIO 0x01 /* IO phase bit */ -#define ESP_STAT_PCD 0x02 /* CD phase bit */ -#define ESP_STAT_PMSG 0x04 /* MSG phase bit */ -#define ESP_STAT_PMASK 0x07 /* Mask of phase bits */ -#define ESP_STAT_TDONE 0x08 /* Transfer Completed */ -#define ESP_STAT_TCNT 0x10 /* Transfer Counter Is Zero */ -#define ESP_STAT_PERR 0x20 /* Parity error */ -#define ESP_STAT_SPAM 0x40 /* Real bad error */ -/* This indicates the 'interrupt pending' condition, it is a reserved - * bit on old revs of the ESP (ESP100, ESP100A, FAS100A). - */ -#define ESP_STAT_INTR 0x80 /* Interrupt */ - -/* The status register can be masked with ESP_STAT_PMASK and compared - * with the following values to determine the current phase the ESP - * (at least thinks it) is in. For our purposes we also add our own - * software 'done' bit for our phase management engine. - */ -#define ESP_DOP (0) /* Data Out */ -#define ESP_DIP (ESP_STAT_PIO) /* Data In */ -#define ESP_CMDP (ESP_STAT_PCD) /* Command */ -#define ESP_STATP (ESP_STAT_PCD|ESP_STAT_PIO) /* Status */ -#define ESP_MOP (ESP_STAT_PMSG|ESP_STAT_PCD) /* Message Out */ -#define ESP_MIP (ESP_STAT_PMSG|ESP_STAT_PCD|ESP_STAT_PIO) /* Message In */ - -/* ESP interrupt register read-only */ -#define ESP_INTR_S 0x01 /* Select w/o ATN */ -#define ESP_INTR_SATN 0x02 /* Select w/ATN */ -#define ESP_INTR_RSEL 0x04 /* Reselected */ -#define ESP_INTR_FDONE 0x08 /* Function done */ -#define ESP_INTR_BSERV 0x10 /* Bus service */ -#define ESP_INTR_DC 0x20 /* Disconnect */ -#define ESP_INTR_IC 0x40 /* Illegal command given */ -#define ESP_INTR_SR 0x80 /* SCSI bus reset detected */ - -/* Interrupt status macros */ -#define ESP_SRESET_IRQ(esp) ((esp)->intreg & (ESP_INTR_SR)) -#define ESP_ILLCMD_IRQ(esp) ((esp)->intreg & (ESP_INTR_IC)) -#define ESP_SELECT_WITH_ATN_IRQ(esp) ((esp)->intreg & (ESP_INTR_SATN)) -#define ESP_SELECT_WITHOUT_ATN_IRQ(esp) ((esp)->intreg & (ESP_INTR_S)) -#define ESP_SELECTION_IRQ(esp) ((ESP_SELECT_WITH_ATN_IRQ(esp)) || \ - (ESP_SELECT_WITHOUT_ATN_IRQ(esp))) -#define ESP_RESELECTION_IRQ(esp) ((esp)->intreg & (ESP_INTR_RSEL)) - -/* ESP sequence step register read-only */ -#define ESP_STEP_VBITS 0x07 /* Valid bits */ -#define ESP_STEP_ASEL 0x00 /* Selection&Arbitrate cmplt */ -#define ESP_STEP_SID 0x01 /* One msg byte sent */ -#define ESP_STEP_NCMD 0x02 /* Was not in command phase */ -#define ESP_STEP_PPC 0x03 /* Early phase chg caused cmnd - * bytes to be lost - */ -#define ESP_STEP_FINI4 0x04 /* Command was sent ok */ - -/* Ho hum, some ESP's set the step register to this as well... */ -#define ESP_STEP_FINI5 0x05 -#define ESP_STEP_FINI6 0x06 -#define ESP_STEP_FINI7 0x07 -#define ESP_STEP_SOM 0x08 /* Synchronous Offset Max */ - -/* ESP chip-test register read-write */ -#define ESP_TEST_TARG 0x01 /* Target test mode */ -#define ESP_TEST_INI 0x02 /* Initiator test mode */ -#define ESP_TEST_TS 0x04 /* Tristate test mode */ - -/* ESP unique ID register read-only, found on fas236+fas100a+fsc only */ -#define ESP_UID_F100A 0x00 /* FAS100A */ -#define ESP_UID_F236 0x02 /* FAS236 */ -#define ESP_UID_FSC 0xa2 /* NCR53CF9x-2 */ -#define ESP_UID_REV 0x07 /* ESP revision */ -#define ESP_UID_FAM 0xf8 /* ESP family */ - -/* ESP fifo flags register read-only */ -/* Note that the following implies a 16 byte FIFO on the ESP. */ -#define ESP_FF_FBYTES 0x1f /* Num bytes in FIFO */ -#define ESP_FF_ONOTZERO 0x20 /* offset ctr not zero (esp100,fsc) */ -#define ESP_FF_SSTEP 0xe0 /* Sequence step */ - -/* ESP clock conversion factor register write-only */ -#define ESP_CCF_F0 0x00 /* 35.01MHz - 40MHz */ -#define ESP_CCF_NEVER 0x01 /* Set it to this and die */ -#define ESP_CCF_F2 0x02 /* 10MHz */ -#define ESP_CCF_F3 0x03 /* 10.01MHz - 15MHz */ -#define ESP_CCF_F4 0x04 /* 15.01MHz - 20MHz */ -#define ESP_CCF_F5 0x05 /* 20.01MHz - 25MHz */ -#define ESP_CCF_F6 0x06 /* 25.01MHz - 30MHz */ -#define ESP_CCF_F7 0x07 /* 30.01MHz - 35MHz */ - -#define ESP_BUS_TIMEOUT 275 /* In milli-seconds */ -#define ESP_TIMEO_CONST 8192 -#define FSC_TIMEO_CONST 7668 -#define ESP_NEG_DEFP(mhz, cfact) \ - ((ESP_BUS_TIMEOUT * ((mhz) / 1000)) / (8192 * (cfact))) -#define FSC_NEG_DEFP(mhz, cfact) \ - ((ESP_BUS_TIMEOUT * ((mhz) / 1000)) / (7668 * (cfact))) -#define ESP_MHZ_TO_CYCLE(mhertz) ((1000000000) / ((mhertz) / 1000)) -#define ESP_TICK(ccf, cycle) ((7682 * (ccf) * (cycle) / 1000)) - - -/* UGLY, UGLY, UGLY! */ -extern int nesps, esps_in_use, esps_running; - -/* For our interrupt engine. */ -#define for_each_esp(esp) \ - for((esp) = espchain; (esp); (esp) = (esp)->next) - - -/* External functions */ -extern void esp_bootup_reset(struct NCR_ESP *esp, struct ESP_regs *eregs); -extern struct NCR_ESP *esp_allocate(struct scsi_host_template *, void *, int); -extern void esp_deallocate(struct NCR_ESP *); -extern void esp_release(void); -extern void esp_initialize(struct NCR_ESP *); -extern irqreturn_t esp_intr(int, void *); -extern const char *esp_info(struct Scsi_Host *); -extern int esp_queue(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *)); -extern int esp_abort(Scsi_Cmnd *); -extern int esp_reset(Scsi_Cmnd *); -extern int esp_proc_info(struct Scsi_Host *shost, char *buffer, char **start, off_t offset, int length, - int inout); -extern int esp_slave_alloc(struct scsi_device *); -extern void esp_slave_destroy(struct scsi_device *); -#endif /* !(NCR53C9X_H) */ diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index d7235f42cf5..bfd0e64964a 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -859,44 +859,31 @@ static int setinqserial(struct aac_dev *dev, void *data, int cid) le32_to_cpu(dev->adapter_info.serial[0]), cid); } -static void set_sense(u8 *sense_buf, u8 sense_key, u8 sense_code, - u8 a_sense_code, u8 incorrect_length, - u8 bit_pointer, u16 field_pointer, - u32 residue) +static inline void set_sense(struct sense_data *sense_data, u8 sense_key, + u8 sense_code, u8 a_sense_code, u8 bit_pointer, u16 field_pointer) { - sense_buf[0] = 0xF0; /* Sense data valid, err code 70h (current error) */ + u8 *sense_buf = (u8 *)sense_data; + /* Sense data valid, err code 70h */ + sense_buf[0] = 0x70; /* No info field */ sense_buf[1] = 0; /* Segment number, always zero */ - if (incorrect_length) { - sense_buf[2] = sense_key | 0x20;/* Set ILI bit | sense key */ - sense_buf[3] = BYTE3(residue); - sense_buf[4] = BYTE2(residue); - sense_buf[5] = BYTE1(residue); - sense_buf[6] = BYTE0(residue); - } else - sense_buf[2] = sense_key; /* Sense key */ - - if (sense_key == ILLEGAL_REQUEST) - sense_buf[7] = 10; /* Additional sense length */ - else - sense_buf[7] = 6; /* Additional sense length */ + sense_buf[2] = sense_key; /* Sense key */ sense_buf[12] = sense_code; /* Additional sense code */ sense_buf[13] = a_sense_code; /* Additional sense code qualifier */ + if (sense_key == ILLEGAL_REQUEST) { - sense_buf[15] = 0; + sense_buf[7] = 10; /* Additional sense length */ - if (sense_code == SENCODE_INVALID_PARAM_FIELD) - sense_buf[15] = 0x80;/* Std sense key specific field */ + sense_buf[15] = bit_pointer; /* Illegal parameter is in the parameter block */ - if (sense_code == SENCODE_INVALID_CDB_FIELD) - sense_buf[15] = 0xc0;/* Std sense key specific field */ + sense_buf[15] |= 0xc0;/* Std sense key specific field */ /* Illegal parameter is in the CDB block */ - sense_buf[15] |= bit_pointer; sense_buf[16] = field_pointer >> 8; /* MSB */ sense_buf[17] = field_pointer; /* LSB */ - } + } else + sense_buf[7] = 6; /* Additional sense length */ } static int aac_bounds_32(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba) @@ -906,11 +893,9 @@ static int aac_bounds_32(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba) dprintk((KERN_DEBUG "aacraid: Illegal lba\n")); cmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; - set_sense((u8 *) &dev->fsa_dev[cid].sense_data, - HARDWARE_ERROR, - SENCODE_INTERNAL_TARGET_FAILURE, - ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0, - 0, 0); + set_sense(&dev->fsa_dev[cid].sense_data, + HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE, + ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0); memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data, min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data), SCSI_SENSE_BUFFERSIZE)); @@ -1520,11 +1505,9 @@ static void io_callback(void *context, struct fib * fibptr) le32_to_cpu(readreply->status)); #endif scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; - set_sense((u8 *) &dev->fsa_dev[cid].sense_data, - HARDWARE_ERROR, - SENCODE_INTERNAL_TARGET_FAILURE, - ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0, - 0, 0); + set_sense(&dev->fsa_dev[cid].sense_data, + HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE, + ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0); memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data), SCSI_SENSE_BUFFERSIZE)); @@ -1733,11 +1716,9 @@ static void synchronize_callback(void *context, struct fib *fibptr) le32_to_cpu(synchronizereply->status)); cmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; - set_sense((u8 *)&dev->fsa_dev[cid].sense_data, - HARDWARE_ERROR, - SENCODE_INTERNAL_TARGET_FAILURE, - ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0, - 0, 0); + set_sense(&dev->fsa_dev[cid].sense_data, + HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE, + ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0); memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data, min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data), SCSI_SENSE_BUFFERSIZE)); @@ -1945,10 +1926,9 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) { dprintk((KERN_WARNING "Only INQUIRY & TUR command supported for controller, rcvd = 0x%x.\n", scsicmd->cmnd[0])); scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; - set_sense((u8 *) &dev->fsa_dev[cid].sense_data, - ILLEGAL_REQUEST, - SENCODE_INVALID_COMMAND, - ASENCODE_INVALID_COMMAND, 0, 0, 0, 0); + set_sense(&dev->fsa_dev[cid].sense_data, + ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND, + ASENCODE_INVALID_COMMAND, 0, 0); memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data), SCSI_SENSE_BUFFERSIZE)); @@ -1995,10 +1975,9 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; - set_sense((u8 *) &dev->fsa_dev[cid].sense_data, - ILLEGAL_REQUEST, - SENCODE_INVALID_CDB_FIELD, - ASENCODE_NO_SENSE, 0, 7, 2, 0); + set_sense(&dev->fsa_dev[cid].sense_data, + ILLEGAL_REQUEST, SENCODE_INVALID_CDB_FIELD, + ASENCODE_NO_SENSE, 7, 2); memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, min_t(size_t, @@ -2254,9 +2233,9 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) */ dprintk((KERN_WARNING "Unhandled SCSI Command: 0x%x.\n", scsicmd->cmnd[0])); scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; - set_sense((u8 *) &dev->fsa_dev[cid].sense_data, - ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND, - ASENCODE_INVALID_COMMAND, 0, 0, 0, 0); + set_sense(&dev->fsa_dev[cid].sense_data, + ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND, + ASENCODE_INVALID_COMMAND, 0, 0); memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data), diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c index f8afa358b6b..abef05146d7 100644 --- a/drivers/scsi/aacraid/commctrl.c +++ b/drivers/scsi/aacraid/commctrl.c @@ -243,6 +243,7 @@ static int next_getadapter_fib(struct aac_dev * dev, void __user *arg) * Search the list of AdapterFibContext addresses on the adapter * to be sure this is a valid address */ + spin_lock_irqsave(&dev->fib_lock, flags); entry = dev->fib_list.next; fibctx = NULL; @@ -251,24 +252,25 @@ static int next_getadapter_fib(struct aac_dev * dev, void __user *arg) /* * Extract the AdapterFibContext from the Input parameters. */ - if (fibctx->unique == f.fibctx) { /* We found a winner */ + if (fibctx->unique == f.fibctx) { /* We found a winner */ break; } entry = entry->next; fibctx = NULL; } if (!fibctx) { + spin_unlock_irqrestore(&dev->fib_lock, flags); dprintk ((KERN_INFO "Fib Context not found\n")); return -EINVAL; } if((fibctx->type != FSAFS_NTC_GET_ADAPTER_FIB_CONTEXT) || (fibctx->size != sizeof(struct aac_fib_context))) { + spin_unlock_irqrestore(&dev->fib_lock, flags); dprintk ((KERN_INFO "Fib Context corrupt?\n")); return -EINVAL; } status = 0; - spin_lock_irqsave(&dev->fib_lock, flags); /* * If there are no fibs to send back, then either wait or return * -EAGAIN @@ -414,8 +416,8 @@ static int close_getadapter_fib(struct aac_dev * dev, void __user *arg) * @arg: ioctl arguments * * This routine returns the driver version. - * Under Linux, there have been no version incompatibilities, so this is - * simple! + * Under Linux, there have been no version incompatibilities, so this is + * simple! */ static int check_revision(struct aac_dev *dev, void __user *arg) @@ -463,7 +465,7 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) u32 data_dir; void __user *sg_user[32]; void *sg_list[32]; - u32 sg_indx = 0; + u32 sg_indx = 0; u32 byte_count = 0; u32 actual_fibsize64, actual_fibsize = 0; int i; @@ -517,11 +519,11 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) // Fix up srb for endian and force some values srbcmd->function = cpu_to_le32(SRBF_ExecuteScsi); // Force this - srbcmd->channel = cpu_to_le32(user_srbcmd->channel); + srbcmd->channel = cpu_to_le32(user_srbcmd->channel); srbcmd->id = cpu_to_le32(user_srbcmd->id); - srbcmd->lun = cpu_to_le32(user_srbcmd->lun); - srbcmd->timeout = cpu_to_le32(user_srbcmd->timeout); - srbcmd->flags = cpu_to_le32(flags); + srbcmd->lun = cpu_to_le32(user_srbcmd->lun); + srbcmd->timeout = cpu_to_le32(user_srbcmd->timeout); + srbcmd->flags = cpu_to_le32(flags); srbcmd->retry_limit = 0; // Obsolete parameter srbcmd->cdb_size = cpu_to_le32(user_srbcmd->cdb_size); memcpy(srbcmd->cdb, user_srbcmd->cdb, sizeof(srbcmd->cdb)); @@ -786,9 +788,9 @@ static int aac_get_pci_info(struct aac_dev* dev, void __user *arg) pci_info.bus = dev->pdev->bus->number; pci_info.slot = PCI_SLOT(dev->pdev->devfn); - if (copy_to_user(arg, &pci_info, sizeof(struct aac_pci_info))) { - dprintk((KERN_DEBUG "aacraid: Could not copy pci info\n")); - return -EFAULT; + if (copy_to_user(arg, &pci_info, sizeof(struct aac_pci_info))) { + dprintk((KERN_DEBUG "aacraid: Could not copy pci info\n")); + return -EFAULT; } return 0; } diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index fb0886140dd..e80d2a0c46a 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -1130,31 +1130,29 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, if (error < 0) goto out_deinit; - if (!(aac->adapter_info.options & AAC_OPT_NEW_COMM)) { - error = pci_set_dma_max_seg_size(pdev, 65536); - if (error) - goto out_deinit; - } - /* * Lets override negotiations and drop the maximum SG limit to 34 */ if ((aac_drivers[index].quirks & AAC_QUIRK_34SG) && - (aac->scsi_host_ptr->sg_tablesize > 34)) { - aac->scsi_host_ptr->sg_tablesize = 34; - aac->scsi_host_ptr->max_sectors - = (aac->scsi_host_ptr->sg_tablesize * 8) + 112; + (shost->sg_tablesize > 34)) { + shost->sg_tablesize = 34; + shost->max_sectors = (shost->sg_tablesize * 8) + 112; } if ((aac_drivers[index].quirks & AAC_QUIRK_17SG) && - (aac->scsi_host_ptr->sg_tablesize > 17)) { - aac->scsi_host_ptr->sg_tablesize = 17; - aac->scsi_host_ptr->max_sectors - = (aac->scsi_host_ptr->sg_tablesize * 8) + 112; + (shost->sg_tablesize > 17)) { + shost->sg_tablesize = 17; + shost->max_sectors = (shost->sg_tablesize * 8) + 112; } + error = pci_set_dma_max_seg_size(pdev, + (aac->adapter_info.options & AAC_OPT_NEW_COMM) ? + (shost->max_sectors << 9) : 65536); + if (error) + goto out_deinit; + /* - * Firware printf works only with older firmware. + * Firmware printf works only with older firmware. */ if (aac_drivers[index].quirks & AAC_QUIRK_34SG) aac->printf_enabled = 1; diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index 374ed025dc5..ccef891d642 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -12261,7 +12261,7 @@ static ushort __devinit AdvReadEEPWord(AdvPortAddr iop_base, int eep_word_addr) /* * Write the EEPROM from 'cfg_buf'. */ -void __devinit +static void __devinit AdvSet3550EEPConfig(AdvPortAddr iop_base, ADVEEP_3550_CONFIG *cfg_buf) { ushort *wbuf; @@ -12328,7 +12328,7 @@ AdvSet3550EEPConfig(AdvPortAddr iop_base, ADVEEP_3550_CONFIG *cfg_buf) /* * Write the EEPROM from 'cfg_buf'. */ -void __devinit +static void __devinit AdvSet38C0800EEPConfig(AdvPortAddr iop_base, ADVEEP_38C0800_CONFIG *cfg_buf) { ushort *wbuf; @@ -12395,7 +12395,7 @@ AdvSet38C0800EEPConfig(AdvPortAddr iop_base, ADVEEP_38C0800_CONFIG *cfg_buf) /* * Write the EEPROM from 'cfg_buf'. */ -void __devinit +static void __devinit AdvSet38C1600EEPConfig(AdvPortAddr iop_base, ADVEEP_38C1600_CONFIG *cfg_buf) { ushort *wbuf; diff --git a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h index a67e29f83ae..57786502e3e 100644 --- a/drivers/scsi/arcmsr/arcmsr.h +++ b/drivers/scsi/arcmsr/arcmsr.h @@ -48,7 +48,7 @@ struct class_device_attribute; /*The limit of outstanding scsi command that firmware can handle*/ #define ARCMSR_MAX_OUTSTANDING_CMD 256 #define ARCMSR_MAX_FREECCB_NUM 320 -#define ARCMSR_DRIVER_VERSION "Driver Version 1.20.00.15 2007/08/30" +#define ARCMSR_DRIVER_VERSION "Driver Version 1.20.00.15 2007/12/24" #define ARCMSR_SCSI_INITIATOR_ID 255 #define ARCMSR_MAX_XFER_SECTORS 512 #define ARCMSR_MAX_XFER_SECTORS_B 4096 @@ -248,6 +248,7 @@ struct FIRMWARE_INFO #define ARCMSR_MESSAGE_START_BGRB 0x00060008 #define ARCMSR_MESSAGE_START_DRIVER_MODE 0x000E0008 #define ARCMSR_MESSAGE_SET_POST_WINDOW 0x000F0008 +#define ARCMSR_MESSAGE_ACTIVE_EOI_MODE 0x00100008 /* ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK */ #define ARCMSR_MESSAGE_FIRMWARE_OK 0x80000000 /* ioctl transfer */ @@ -256,6 +257,7 @@ struct FIRMWARE_INFO #define ARCMSR_DRV2IOP_DATA_READ_OK 0x00000002 #define ARCMSR_DRV2IOP_CDB_POSTED 0x00000004 #define ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED 0x00000008 +#define ARCMSR_DRV2IOP_END_OF_INTERRUPT 0x00000010 /* data tunnel buffer between user space program and its firmware */ /* user space data to iop 128bytes */ diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c index f4a202e8df2..4f9ff32cfed 100644 --- a/drivers/scsi/arcmsr/arcmsr_hba.c +++ b/drivers/scsi/arcmsr/arcmsr_hba.c @@ -315,9 +315,6 @@ static int arcmsr_alloc_ccb_pool(struct AdapterControlBlock *acb) (0x20 - ((unsigned long)dma_coherent_handle & 0x1F)); } - reg = (struct MessageUnit_B *)(dma_coherent + - ARCMSR_MAX_FREECCB_NUM * sizeof(struct CommandControlBlock)); - dma_addr = dma_coherent_handle; ccb_tmp = (struct CommandControlBlock *)dma_coherent; for (i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++) { @@ -371,8 +368,8 @@ static int arcmsr_alloc_ccb_pool(struct AdapterControlBlock *acb) out: dma_free_coherent(&acb->pdev->dev, - ARCMSR_MAX_FREECCB_NUM * sizeof(struct CommandControlBlock) + 0x20, - acb->dma_coherent, acb->dma_coherent_handle); + (ARCMSR_MAX_FREECCB_NUM * sizeof(struct CommandControlBlock) + 0x20 + + sizeof(struct MessageUnit_B)), acb->dma_coherent, acb->dma_coherent_handle); return -ENOMEM; } @@ -509,6 +506,7 @@ static uint8_t arcmsr_hbb_wait_msgint_ready(struct AdapterControlBlock *acb) & ARCMSR_IOP2DRV_MESSAGE_CMD_DONE) { writel(ARCMSR_MESSAGE_INT_CLEAR_PATTERN , reg->iop2drv_doorbell_reg); + writel(ARCMSR_DRV2IOP_END_OF_INTERRUPT, reg->drv2iop_doorbell_reg); return 0x00; } msleep(10); @@ -748,6 +746,7 @@ static void arcmsr_drain_donequeue(struct AdapterControlBlock *acb, uint32_t fla , ccb->startdone , atomic_read(&acb->ccboutstandingcount)); } + else arcmsr_report_ccb_state(acb, ccb, flag_ccb); } @@ -886,7 +885,7 @@ static void arcmsr_enable_outbound_ints(struct AdapterControlBlock *acb, \ } } -static void arcmsr_build_ccb(struct AdapterControlBlock *acb, +static int arcmsr_build_ccb(struct AdapterControlBlock *acb, struct CommandControlBlock *ccb, struct scsi_cmnd *pcmd) { struct ARCMSR_CDB *arcmsr_cdb = (struct ARCMSR_CDB *)&ccb->arcmsr_cdb; @@ -906,6 +905,8 @@ static void arcmsr_build_ccb(struct AdapterControlBlock *acb, memcpy(arcmsr_cdb->Cdb, pcmd->cmnd, pcmd->cmd_len); nseg = scsi_dma_map(pcmd); + if (nseg > ARCMSR_MAX_SG_ENTRIES) + return FAILED; BUG_ON(nseg < 0); if (nseg) { @@ -946,6 +947,7 @@ static void arcmsr_build_ccb(struct AdapterControlBlock *acb, arcmsr_cdb->Flags |= ARCMSR_CDB_FLAG_WRITE; ccb->ccb_flags |= CCB_FLAG_WRITE; } + return SUCCESS; } static void arcmsr_post_ccb(struct AdapterControlBlock *acb, struct CommandControlBlock *ccb) @@ -1036,18 +1038,22 @@ static void arcmsr_free_ccb_pool(struct AdapterControlBlock *acb) switch (acb->adapter_type) { case ACB_ADAPTER_TYPE_A: { iounmap(acb->pmuA); + dma_free_coherent(&acb->pdev->dev, + ARCMSR_MAX_FREECCB_NUM * sizeof (struct CommandControlBlock) + 0x20, + acb->dma_coherent, + acb->dma_coherent_handle); break; } case ACB_ADAPTER_TYPE_B: { struct MessageUnit_B *reg = acb->pmuB; iounmap(reg->drv2iop_doorbell_reg - ARCMSR_DRV2IOP_DOORBELL); iounmap(reg->ioctl_wbuffer_reg - ARCMSR_IOCTL_WBUFFER); + dma_free_coherent(&acb->pdev->dev, + (ARCMSR_MAX_FREECCB_NUM * sizeof(struct CommandControlBlock) + 0x20 + + sizeof(struct MessageUnit_B)), acb->dma_coherent, acb->dma_coherent_handle); } } - dma_free_coherent(&acb->pdev->dev, - ARCMSR_MAX_FREECCB_NUM * sizeof (struct CommandControlBlock) + 0x20, - acb->dma_coherent, - acb->dma_coherent_handle); + } void arcmsr_iop_message_read(struct AdapterControlBlock *acb) @@ -1273,7 +1279,9 @@ static int arcmsr_handle_hbb_isr(struct AdapterControlBlock *acb) return 1; writel(~outbound_doorbell, reg->iop2drv_doorbell_reg); - + /*in case the last action of doorbell interrupt clearance is cached, this action can push HW to write down the clear bit*/ + readl(reg->iop2drv_doorbell_reg); + writel(ARCMSR_DRV2IOP_END_OF_INTERRUPT, reg->drv2iop_doorbell_reg); if (outbound_doorbell & ARCMSR_IOP2DRV_DATA_WRITE_OK) { arcmsr_iop2drv_data_wrote_handle(acb); } @@ -1380,12 +1388,13 @@ static int arcmsr_iop_message_xfer(struct AdapterControlBlock *acb, \ case ARCMSR_MESSAGE_READ_RQBUFFER: { unsigned long *ver_addr; - dma_addr_t buf_handle; uint8_t *pQbuffer, *ptmpQbuffer; int32_t allxfer_len = 0; + void *tmp; - ver_addr = pci_alloc_consistent(acb->pdev, 1032, &buf_handle); - if (!ver_addr) { + tmp = kmalloc(1032, GFP_KERNEL|GFP_DMA); + ver_addr = (unsigned long *)tmp; + if (!tmp) { retvalue = ARCMSR_MESSAGE_FAIL; goto message_out; } @@ -1421,18 +1430,19 @@ static int arcmsr_iop_message_xfer(struct AdapterControlBlock *acb, \ memcpy(pcmdmessagefld->messagedatabuffer, (uint8_t *)ver_addr, allxfer_len); pcmdmessagefld->cmdmessage.Length = allxfer_len; pcmdmessagefld->cmdmessage.ReturnCode = ARCMSR_MESSAGE_RETURNCODE_OK; - pci_free_consistent(acb->pdev, 1032, ver_addr, buf_handle); + kfree(tmp); } break; case ARCMSR_MESSAGE_WRITE_WQBUFFER: { unsigned long *ver_addr; - dma_addr_t buf_handle; int32_t my_empty_len, user_len, wqbuf_firstindex, wqbuf_lastindex; uint8_t *pQbuffer, *ptmpuserbuffer; + void *tmp; - ver_addr = pci_alloc_consistent(acb->pdev, 1032, &buf_handle); - if (!ver_addr) { + tmp = kmalloc(1032, GFP_KERNEL|GFP_DMA); + ver_addr = (unsigned long *)tmp; + if (!tmp) { retvalue = ARCMSR_MESSAGE_FAIL; goto message_out; } @@ -1482,7 +1492,7 @@ static int arcmsr_iop_message_xfer(struct AdapterControlBlock *acb, \ retvalue = ARCMSR_MESSAGE_FAIL; } } - pci_free_consistent(acb->pdev, 1032, ver_addr, buf_handle); + kfree(tmp); } break; @@ -1682,8 +1692,11 @@ static int arcmsr_queue_command(struct scsi_cmnd *cmd, ccb = arcmsr_get_freeccb(acb); if (!ccb) return SCSI_MLQUEUE_HOST_BUSY; - - arcmsr_build_ccb(acb, ccb, cmd); + if ( arcmsr_build_ccb( acb, ccb, cmd ) == FAILED ) { + cmd->result = (DID_ERROR << 16) | (RESERVATION_CONFLICT << 1); + cmd->scsi_done(cmd); + return 0; + } arcmsr_post_ccb(acb, ccb); return 0; } @@ -1844,7 +1857,7 @@ static void arcmsr_polling_hba_ccbdone(struct AdapterControlBlock *acb, } } -static void arcmsr_polling_hbb_ccbdone(struct AdapterControlBlock *acb, \ +static void arcmsr_polling_hbb_ccbdone(struct AdapterControlBlock *acb, struct CommandControlBlock *poll_ccb) { struct MessageUnit_B *reg = acb->pmuB; @@ -1878,7 +1891,7 @@ static void arcmsr_polling_hbb_ccbdone(struct AdapterControlBlock *acb, \ (acb->vir2phy_offset + (flag_ccb << 5));/*frame must be 32 bytes aligned*/ poll_ccb_done = (ccb == poll_ccb) ? 1:0; if ((ccb->acb != acb) || (ccb->startdone != ARCMSR_CCB_START)) { - if (ccb->startdone == ARCMSR_CCB_ABORTED) { + if ((ccb->startdone == ARCMSR_CCB_ABORTED) || (ccb == poll_ccb)) { printk(KERN_NOTICE "arcmsr%d: \ scsi id = %d lun = %d ccb = '0x%p' poll command abort successfully \n" ,acb->host->host_no @@ -1901,7 +1914,7 @@ static void arcmsr_polling_hbb_ccbdone(struct AdapterControlBlock *acb, \ } /*drain reply FIFO*/ } -static void arcmsr_polling_ccbdone(struct AdapterControlBlock *acb, \ +static void arcmsr_polling_ccbdone(struct AdapterControlBlock *acb, struct CommandControlBlock *poll_ccb) { switch (acb->adapter_type) { @@ -2026,6 +2039,7 @@ static void arcmsr_wait_firmware_ready(struct AdapterControlBlock *acb) do { firmware_state = readl(reg->iop2drv_doorbell_reg); } while ((firmware_state & ARCMSR_MESSAGE_FIRMWARE_OK) == 0); + writel(ARCMSR_DRV2IOP_END_OF_INTERRUPT, reg->drv2iop_doorbell_reg); } break; } @@ -2090,19 +2104,39 @@ static void arcmsr_clear_doorbell_queue_buffer(struct AdapterControlBlock *acb) } } +static void arcmsr_enable_eoi_mode(struct AdapterControlBlock *acb) +{ + switch (acb->adapter_type) { + case ACB_ADAPTER_TYPE_A: + return; + case ACB_ADAPTER_TYPE_B: + { + struct MessageUnit_B *reg = acb->pmuB; + writel(ARCMSR_MESSAGE_ACTIVE_EOI_MODE, reg->drv2iop_doorbell_reg); + if(arcmsr_hbb_wait_msgint_ready(acb)) { + printk(KERN_NOTICE "ARCMSR IOP enables EOI_MODE TIMEOUT"); + return; + } + } + break; + } + return; +} + static void arcmsr_iop_init(struct AdapterControlBlock *acb) { uint32_t intmask_org; - arcmsr_wait_firmware_ready(acb); - arcmsr_iop_confirm(acb); /* disable all outbound interrupt */ intmask_org = arcmsr_disable_outbound_ints(acb); + arcmsr_wait_firmware_ready(acb); + arcmsr_iop_confirm(acb); arcmsr_get_firmware_spec(acb); /*start background rebuild*/ arcmsr_start_adapter_bgrb(acb); /* empty doorbell Qbuffer if door bell ringed */ arcmsr_clear_doorbell_queue_buffer(acb); + arcmsr_enable_eoi_mode(acb); /* enable outbound Post Queue,outbound doorbell Interrupt */ arcmsr_enable_outbound_ints(acb, intmask_org); acb->acb_flags |= ACB_F_IOP_INITED; @@ -2275,6 +2309,7 @@ static pci_ers_result_t arcmsr_pci_slot_reset(struct pci_dev *pdev) arcmsr_start_adapter_bgrb(acb); /* empty doorbell Qbuffer if door bell ringed */ arcmsr_clear_doorbell_queue_buffer(acb); + arcmsr_enable_eoi_mode(acb); /* enable outbound Post Queue,outbound doorbell Interrupt */ arcmsr_enable_outbound_ints(acb, intmask_org); acb->acb_flags |= ACB_F_IOP_INITED; diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c index eceacf6d49e..3bedf2466bd 100644 --- a/drivers/scsi/arm/acornscsi.c +++ b/drivers/scsi/arm/acornscsi.c @@ -1790,7 +1790,7 @@ int acornscsi_starttransfer(AS_Host *host) return 0; } - residual = host->SCpnt->request_bufflen - host->scsi.SCp.scsi_xferred; + residual = scsi_bufflen(host->SCpnt) - host->scsi.SCp.scsi_xferred; sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer); sbic_arm_writenext(host->scsi.io_port, residual >> 16); @@ -2270,7 +2270,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq) case 0x4b: /* -> PHASE_STATUSIN */ case 0x8b: /* -> PHASE_STATUSIN */ /* DATA IN -> STATUS */ - host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen - + host->scsi.SCp.scsi_xferred = scsi_bufflen(host->SCpnt) - acornscsi_sbic_xfcount(host); acornscsi_dma_stop(host); acornscsi_readstatusbyte(host); @@ -2281,7 +2281,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq) case 0x4e: /* -> PHASE_MSGOUT */ case 0x8e: /* -> PHASE_MSGOUT */ /* DATA IN -> MESSAGE OUT */ - host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen - + host->scsi.SCp.scsi_xferred = scsi_bufflen(host->SCpnt) - acornscsi_sbic_xfcount(host); acornscsi_dma_stop(host); acornscsi_sendmessage(host); @@ -2291,7 +2291,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq) case 0x4f: /* message in */ case 0x8f: /* message in */ /* DATA IN -> MESSAGE IN */ - host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen - + host->scsi.SCp.scsi_xferred = scsi_bufflen(host->SCpnt) - acornscsi_sbic_xfcount(host); acornscsi_dma_stop(host); acornscsi_message(host); /* -> PHASE_MSGIN, PHASE_DISCONNECT */ @@ -2319,7 +2319,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq) case 0x4b: /* -> PHASE_STATUSIN */ case 0x8b: /* -> PHASE_STATUSIN */ /* DATA OUT -> STATUS */ - host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen - + host->scsi.SCp.scsi_xferred = scsi_bufflen(host->SCpnt) - acornscsi_sbic_xfcount(host); acornscsi_dma_stop(host); acornscsi_dma_adjust(host); @@ -2331,7 +2331,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq) case 0x4e: /* -> PHASE_MSGOUT */ case 0x8e: /* -> PHASE_MSGOUT */ /* DATA OUT -> MESSAGE OUT */ - host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen - + host->scsi.SCp.scsi_xferred = scsi_bufflen(host->SCpnt) - acornscsi_sbic_xfcount(host); acornscsi_dma_stop(host); acornscsi_dma_adjust(host); @@ -2342,7 +2342,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq) case 0x4f: /* message in */ case 0x8f: /* message in */ /* DATA OUT -> MESSAGE IN */ - host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen - + host->scsi.SCp.scsi_xferred = scsi_bufflen(host->SCpnt) - acornscsi_sbic_xfcount(host); acornscsi_dma_stop(host); acornscsi_dma_adjust(host); diff --git a/drivers/scsi/arm/scsi.h b/drivers/scsi/arm/scsi.h index bb6550e3192..138a521ba1a 100644 --- a/drivers/scsi/arm/scsi.h +++ b/drivers/scsi/arm/scsi.h @@ -18,17 +18,32 @@ * The scatter-gather list handling. This contains all * the yucky stuff that needs to be fixed properly. */ + +/* + * copy_SCp_to_sg() Assumes contiguous allocation at @sg of at-most @max + * entries of uninitialized memory. SCp is from scsi-ml and has a valid + * (possibly chained) sg-list + */ static inline int copy_SCp_to_sg(struct scatterlist *sg, struct scsi_pointer *SCp, int max) { int bufs = SCp->buffers_residual; + /* FIXME: It should be easy for drivers to loop on copy_SCp_to_sg(). + * and to remove this BUG_ON. Use min() in-its-place + */ BUG_ON(bufs + 1 > max); sg_set_buf(sg, SCp->ptr, SCp->this_residual); - if (bufs) - memcpy(sg + 1, SCp->buffer + 1, - sizeof(struct scatterlist) * bufs); + if (bufs) { + struct scatterlist *src_sg; + unsigned i; + + for_each_sg(sg_next(SCp->buffer), src_sg, bufs, i) + *(++sg) = *src_sg; + sg_mark_end(sg); + } + return bufs + 1; } @@ -36,7 +51,7 @@ static inline int next_SCp(struct scsi_pointer *SCp) { int ret = SCp->buffers_residual; if (ret) { - SCp->buffer++; + SCp->buffer = sg_next(SCp->buffer); SCp->buffers_residual--; SCp->ptr = sg_virt(SCp->buffer); SCp->this_residual = SCp->buffer->length; @@ -68,46 +83,46 @@ static inline void init_SCp(struct scsi_cmnd *SCpnt) { memset(&SCpnt->SCp, 0, sizeof(struct scsi_pointer)); - if (SCpnt->use_sg) { + if (scsi_bufflen(SCpnt)) { unsigned long len = 0; - int buf; - SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->request_buffer; - SCpnt->SCp.buffers_residual = SCpnt->use_sg - 1; + SCpnt->SCp.buffer = scsi_sglist(SCpnt); + SCpnt->SCp.buffers_residual = scsi_sg_count(SCpnt) - 1; SCpnt->SCp.ptr = sg_virt(SCpnt->SCp.buffer); SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length; - SCpnt->SCp.phase = SCpnt->request_bufflen; + SCpnt->SCp.phase = scsi_bufflen(SCpnt); #ifdef BELT_AND_BRACES - /* - * Calculate correct buffer length. Some commands - * come in with the wrong request_bufflen. - */ - for (buf = 0; buf <= SCpnt->SCp.buffers_residual; buf++) - len += SCpnt->SCp.buffer[buf].length; - - if (SCpnt->request_bufflen != len) - printk(KERN_WARNING "scsi%d.%c: bad request buffer " - "length %d, should be %ld\n", SCpnt->device->host->host_no, - '0' + SCpnt->device->id, SCpnt->request_bufflen, len); - SCpnt->request_bufflen = len; + { /* + * Calculate correct buffer length. Some commands + * come in with the wrong scsi_bufflen. + */ + struct scatterlist *sg; + unsigned i, sg_count = scsi_sg_count(SCpnt); + + scsi_for_each_sg(SCpnt, sg, sg_count, i) + len += sg->length; + + if (scsi_bufflen(SCpnt) != len) { + printk(KERN_WARNING + "scsi%d.%c: bad request buffer " + "length %d, should be %ld\n", + SCpnt->device->host->host_no, + '0' + SCpnt->device->id, + scsi_bufflen(SCpnt), len); + /* + * FIXME: Totaly naive fixup. We should abort + * with error + */ + SCpnt->SCp.phase = + min_t(unsigned long, len, + scsi_bufflen(SCpnt)); + } + } #endif } else { - SCpnt->SCp.ptr = (unsigned char *)SCpnt->request_buffer; - SCpnt->SCp.this_residual = SCpnt->request_bufflen; - SCpnt->SCp.phase = SCpnt->request_bufflen; - } - - /* - * If the upper SCSI layers pass a buffer, but zero length, - * we aren't interested in the buffer pointer. - */ - if (SCpnt->SCp.this_residual == 0 && SCpnt->SCp.ptr) { -#if 0 //def BELT_AND_BRACES - printk(KERN_WARNING "scsi%d.%c: zero length buffer passed for " - "command ", SCpnt->host->host_no, '0' + SCpnt->target); - __scsi_print_command(SCpnt->cmnd); -#endif SCpnt->SCp.ptr = NULL; + SCpnt->SCp.this_residual = 0; + SCpnt->SCp.phase = 0; } } diff --git a/drivers/scsi/blz1230.c b/drivers/scsi/blz1230.c deleted file mode 100644 index 23f7c24ab80..00000000000 --- a/drivers/scsi/blz1230.c +++ /dev/null @@ -1,353 +0,0 @@ -/* blz1230.c: Driver for Blizzard 1230 SCSI IV Controller. - * - * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk) - * - * This driver is based on the CyberStorm driver, hence the occasional - * reference to CyberStorm. - */ - -/* TODO: - * - * 1) Figure out how to make a cleaner merge with the sparc driver with regard - * to the caches and the Sparc MMU mapping. - * 2) Make as few routines required outside the generic driver. A lot of the - * routines in this file used to be inline! - */ - -#include <linux/module.h> - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/blkdev.h> -#include <linux/proc_fs.h> -#include <linux/stat.h> -#include <linux/interrupt.h> - -#include "scsi.h" -#include <scsi/scsi_host.h> -#include "NCR53C9x.h" - -#include <linux/zorro.h> -#include <asm/irq.h> -#include <asm/amigaints.h> -#include <asm/amigahw.h> - -#include <asm/pgtable.h> - -#define MKIV 1 - -/* The controller registers can be found in the Z2 config area at these - * offsets: - */ -#define BLZ1230_ESP_ADDR 0x8000 -#define BLZ1230_DMA_ADDR 0x10000 -#define BLZ1230II_ESP_ADDR 0x10000 -#define BLZ1230II_DMA_ADDR 0x10021 - - -/* The Blizzard 1230 DMA interface - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * Only two things can be programmed in the Blizzard DMA: - * 1) The data direction is controlled by the status of bit 31 (1 = write) - * 2) The source/dest address (word aligned, shifted one right) in bits 30-0 - * - * Program DMA by first latching the highest byte of the address/direction - * (i.e. bits 31-24 of the long word constructed as described in steps 1+2 - * above). Then write each byte of the address/direction (starting with the - * top byte, working down) to the DMA address register. - * - * Figure out interrupt status by reading the ESP status byte. - */ -struct blz1230_dma_registers { - volatile unsigned char dma_addr; /* DMA address [0x0000] */ - unsigned char dmapad2[0x7fff]; - volatile unsigned char dma_latch; /* DMA latch [0x8000] */ -}; - -struct blz1230II_dma_registers { - volatile unsigned char dma_addr; /* DMA address [0x0000] */ - unsigned char dmapad2[0xf]; - volatile unsigned char dma_latch; /* DMA latch [0x0010] */ -}; - -#define BLZ1230_DMA_WRITE 0x80000000 - -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count); -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp); -static void dma_dump_state(struct NCR_ESP *esp); -static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length); -static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length); -static void dma_ints_off(struct NCR_ESP *esp); -static void dma_ints_on(struct NCR_ESP *esp); -static int dma_irq_p(struct NCR_ESP *esp); -static int dma_ports_p(struct NCR_ESP *esp); -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write); - -static volatile unsigned char cmd_buffer[16]; - /* This is where all commands are put - * before they are transferred to the ESP chip - * via PIO. - */ - -/***************************************************************** Detection */ -int __init blz1230_esp_detect(struct scsi_host_template *tpnt) -{ - struct NCR_ESP *esp; - struct zorro_dev *z = NULL; - unsigned long address; - struct ESP_regs *eregs; - unsigned long board; - -#if MKIV -#define REAL_BLZ1230_ID ZORRO_PROD_PHASE5_BLIZZARD_1230_IV_1260 -#define REAL_BLZ1230_ESP_ADDR BLZ1230_ESP_ADDR -#define REAL_BLZ1230_DMA_ADDR BLZ1230_DMA_ADDR -#else -#define REAL_BLZ1230_ID ZORRO_PROD_PHASE5_BLIZZARD_1230_II_FASTLANE_Z3_CYBERSCSI_CYBERSTORM060 -#define REAL_BLZ1230_ESP_ADDR BLZ1230II_ESP_ADDR -#define REAL_BLZ1230_DMA_ADDR BLZ1230II_DMA_ADDR -#endif - - if ((z = zorro_find_device(REAL_BLZ1230_ID, z))) { - board = z->resource.start; - if (request_mem_region(board+REAL_BLZ1230_ESP_ADDR, - sizeof(struct ESP_regs), "NCR53C9x")) { - /* Do some magic to figure out if the blizzard is - * equipped with a SCSI controller - */ - address = ZTWO_VADDR(board); - eregs = (struct ESP_regs *)(address + REAL_BLZ1230_ESP_ADDR); - esp = esp_allocate(tpnt, (void *)board + REAL_BLZ1230_ESP_ADDR, - 0); - - esp_write(eregs->esp_cfg1, (ESP_CONFIG1_PENABLE | 7)); - udelay(5); - if(esp_read(eregs->esp_cfg1) != (ESP_CONFIG1_PENABLE | 7)) - goto err_out; - - /* Do command transfer with programmed I/O */ - esp->do_pio_cmds = 1; - - /* Required functions */ - esp->dma_bytes_sent = &dma_bytes_sent; - esp->dma_can_transfer = &dma_can_transfer; - esp->dma_dump_state = &dma_dump_state; - esp->dma_init_read = &dma_init_read; - esp->dma_init_write = &dma_init_write; - esp->dma_ints_off = &dma_ints_off; - esp->dma_ints_on = &dma_ints_on; - esp->dma_irq_p = &dma_irq_p; - esp->dma_ports_p = &dma_ports_p; - esp->dma_setup = &dma_setup; - - /* Optional functions */ - esp->dma_barrier = 0; - esp->dma_drain = 0; - esp->dma_invalidate = 0; - esp->dma_irq_entry = 0; - esp->dma_irq_exit = 0; - esp->dma_led_on = 0; - esp->dma_led_off = 0; - esp->dma_poll = 0; - esp->dma_reset = 0; - - /* SCSI chip speed */ - esp->cfreq = 40000000; - - /* The DMA registers on the Blizzard are mapped - * relative to the device (i.e. in the same Zorro - * I/O block). - */ - esp->dregs = (void *)(address + REAL_BLZ1230_DMA_ADDR); - - /* ESP register base */ - esp->eregs = eregs; - - /* Set the command buffer */ - esp->esp_command = cmd_buffer; - esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer); - - esp->irq = IRQ_AMIGA_PORTS; - esp->slot = board+REAL_BLZ1230_ESP_ADDR; - if (request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED, - "Blizzard 1230 SCSI IV", esp->ehost)) - goto err_out; - - /* Figure out our scsi ID on the bus */ - esp->scsi_id = 7; - - /* We don't have a differential SCSI-bus. */ - esp->diff = 0; - - esp_initialize(esp); - - printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use); - esps_running = esps_in_use; - return esps_in_use; - } - } - return 0; - - err_out: - scsi_unregister(esp->ehost); - esp_deallocate(esp); - release_mem_region(board+REAL_BLZ1230_ESP_ADDR, - sizeof(struct ESP_regs)); - return 0; -} - -/************************************************************* DMA Functions */ -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count) -{ - /* Since the Blizzard DMA is fully dedicated to the ESP chip, - * the number of bytes sent (to the ESP chip) equals the number - * of bytes in the FIFO - there is no buffering in the DMA controller. - * XXXX Do I read this right? It is from host to ESP, right? - */ - return fifo_count; -} - -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - /* I don't think there's any limit on the Blizzard DMA. So we use what - * the ESP chip can handle (24 bit). - */ - unsigned long sz = sp->SCp.this_residual; - if(sz > 0x1000000) - sz = 0x1000000; - return sz; -} - -static void dma_dump_state(struct NCR_ESP *esp) -{ - ESPLOG(("intreq:<%04x>, intena:<%04x>\n", - amiga_custom.intreqr, amiga_custom.intenar)); -} - -void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length) -{ -#if MKIV - struct blz1230_dma_registers *dregs = - (struct blz1230_dma_registers *) (esp->dregs); -#else - struct blz1230II_dma_registers *dregs = - (struct blz1230II_dma_registers *) (esp->dregs); -#endif - - cache_clear(addr, length); - - addr >>= 1; - addr &= ~(BLZ1230_DMA_WRITE); - - /* First set latch */ - dregs->dma_latch = (addr >> 24) & 0xff; - - /* Then pump the address to the DMA address register */ -#if MKIV - dregs->dma_addr = (addr >> 24) & 0xff; -#endif - dregs->dma_addr = (addr >> 16) & 0xff; - dregs->dma_addr = (addr >> 8) & 0xff; - dregs->dma_addr = (addr ) & 0xff; -} - -void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length) -{ -#if MKIV - struct blz1230_dma_registers *dregs = - (struct blz1230_dma_registers *) (esp->dregs); -#else - struct blz1230II_dma_registers *dregs = - (struct blz1230II_dma_registers *) (esp->dregs); -#endif - - cache_push(addr, length); - - addr >>= 1; - addr |= BLZ1230_DMA_WRITE; - - /* First set latch */ - dregs->dma_latch = (addr >> 24) & 0xff; - - /* Then pump the address to the DMA address register */ -#if MKIV - dregs->dma_addr = (addr >> 24) & 0xff; -#endif - dregs->dma_addr = (addr >> 16) & 0xff; - dregs->dma_addr = (addr >> 8) & 0xff; - dregs->dma_addr = (addr ) & 0xff; -} - -static void dma_ints_off(struct NCR_ESP *esp) -{ - disable_irq(esp->irq); -} - -static void dma_ints_on(struct NCR_ESP *esp) -{ - enable_irq(esp->irq); -} - -static int dma_irq_p(struct NCR_ESP *esp) -{ - return (esp_read(esp->eregs->esp_status) & ESP_STAT_INTR); -} - -static int dma_ports_p(struct NCR_ESP *esp) -{ - return ((amiga_custom.intenar) & IF_PORTS); -} - -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write) -{ - /* On the Sparc, DMA_ST_WRITE means "move data from device to memory" - * so when (write) is true, it actually means READ! - */ - if(write){ - dma_init_read(esp, addr, count); - } else { - dma_init_write(esp, addr, count); - } -} - -#define HOSTS_C - -int blz1230_esp_release(struct Scsi_Host *instance) -{ -#ifdef MODULE - unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev; - esp_deallocate((struct NCR_ESP *)instance->hostdata); - esp_release(); - release_mem_region(address, sizeof(struct ESP_regs)); - free_irq(IRQ_AMIGA_PORTS, esp_intr); -#endif - return 1; -} - - -static struct scsi_host_template driver_template = { - .proc_name = "esp-blz1230", - .proc_info = esp_proc_info, - .name = "Blizzard1230 SCSI IV", - .detect = blz1230_esp_detect, - .slave_alloc = esp_slave_alloc, - .slave_destroy = esp_slave_destroy, - .release = blz1230_esp_release, - .queuecommand = esp_queue, - .eh_abort_handler = esp_abort, - .eh_bus_reset_handler = esp_reset, - .can_queue = 7, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = ENABLE_CLUSTERING -}; - - -#include "scsi_module.c" - -MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/blz2060.c b/drivers/scsi/blz2060.c deleted file mode 100644 index b6203ec0096..00000000000 --- a/drivers/scsi/blz2060.c +++ /dev/null @@ -1,306 +0,0 @@ -/* blz2060.c: Driver for Blizzard 2060 SCSI Controller. - * - * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk) - * - * This driver is based on the CyberStorm driver, hence the occasional - * reference to CyberStorm. - */ - -/* TODO: - * - * 1) Figure out how to make a cleaner merge with the sparc driver with regard - * to the caches and the Sparc MMU mapping. - * 2) Make as few routines required outside the generic driver. A lot of the - * routines in this file used to be inline! - */ - -#include <linux/module.h> - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/blkdev.h> -#include <linux/proc_fs.h> -#include <linux/stat.h> -#include <linux/interrupt.h> - -#include "scsi.h" -#include <scsi/scsi_host.h> -#include "NCR53C9x.h" - -#include <linux/zorro.h> -#include <asm/irq.h> -#include <asm/amigaints.h> -#include <asm/amigahw.h> - -#include <asm/pgtable.h> - -/* The controller registers can be found in the Z2 config area at these - * offsets: - */ -#define BLZ2060_ESP_ADDR 0x1ff00 -#define BLZ2060_DMA_ADDR 0x1ffe0 - - -/* The Blizzard 2060 DMA interface - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * Only two things can be programmed in the Blizzard DMA: - * 1) The data direction is controlled by the status of bit 31 (1 = write) - * 2) The source/dest address (word aligned, shifted one right) in bits 30-0 - * - * Figure out interrupt status by reading the ESP status byte. - */ -struct blz2060_dma_registers { - volatile unsigned char dma_led_ctrl; /* DMA led control [0x000] */ - unsigned char dmapad1[0x0f]; - volatile unsigned char dma_addr0; /* DMA address (MSB) [0x010] */ - unsigned char dmapad2[0x03]; - volatile unsigned char dma_addr1; /* DMA address [0x014] */ - unsigned char dmapad3[0x03]; - volatile unsigned char dma_addr2; /* DMA address [0x018] */ - unsigned char dmapad4[0x03]; - volatile unsigned char dma_addr3; /* DMA address (LSB) [0x01c] */ -}; - -#define BLZ2060_DMA_WRITE 0x80000000 - -/* DMA control bits */ -#define BLZ2060_DMA_LED 0x02 /* HD led control 1 = off */ - -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count); -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp); -static void dma_dump_state(struct NCR_ESP *esp); -static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length); -static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length); -static void dma_ints_off(struct NCR_ESP *esp); -static void dma_ints_on(struct NCR_ESP *esp); -static int dma_irq_p(struct NCR_ESP *esp); -static void dma_led_off(struct NCR_ESP *esp); -static void dma_led_on(struct NCR_ESP *esp); -static int dma_ports_p(struct NCR_ESP *esp); -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write); - -static volatile unsigned char cmd_buffer[16]; - /* This is where all commands are put - * before they are transferred to the ESP chip - * via PIO. - */ - -/***************************************************************** Detection */ -int __init blz2060_esp_detect(struct scsi_host_template *tpnt) -{ - struct NCR_ESP *esp; - struct zorro_dev *z = NULL; - unsigned long address; - - if ((z = zorro_find_device(ZORRO_PROD_PHASE5_BLIZZARD_2060, z))) { - unsigned long board = z->resource.start; - if (request_mem_region(board+BLZ2060_ESP_ADDR, - sizeof(struct ESP_regs), "NCR53C9x")) { - esp = esp_allocate(tpnt, (void *)board + BLZ2060_ESP_ADDR, 0); - - /* Do command transfer with programmed I/O */ - esp->do_pio_cmds = 1; - - /* Required functions */ - esp->dma_bytes_sent = &dma_bytes_sent; - esp->dma_can_transfer = &dma_can_transfer; - esp->dma_dump_state = &dma_dump_state; - esp->dma_init_read = &dma_init_read; - esp->dma_init_write = &dma_init_write; - esp->dma_ints_off = &dma_ints_off; - esp->dma_ints_on = &dma_ints_on; - esp->dma_irq_p = &dma_irq_p; - esp->dma_ports_p = &dma_ports_p; - esp->dma_setup = &dma_setup; - - /* Optional functions */ - esp->dma_barrier = 0; - esp->dma_drain = 0; - esp->dma_invalidate = 0; - esp->dma_irq_entry = 0; - esp->dma_irq_exit = 0; - esp->dma_led_on = &dma_led_on; - esp->dma_led_off = &dma_led_off; - esp->dma_poll = 0; - esp->dma_reset = 0; - - /* SCSI chip speed */ - esp->cfreq = 40000000; - - /* The DMA registers on the Blizzard are mapped - * relative to the device (i.e. in the same Zorro - * I/O block). - */ - address = (unsigned long)ZTWO_VADDR(board); - esp->dregs = (void *)(address + BLZ2060_DMA_ADDR); - - /* ESP register base */ - esp->eregs = (struct ESP_regs *)(address + BLZ2060_ESP_ADDR); - - /* Set the command buffer */ - esp->esp_command = cmd_buffer; - esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer); - - esp->irq = IRQ_AMIGA_PORTS; - request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED, - "Blizzard 2060 SCSI", esp->ehost); - - /* Figure out our scsi ID on the bus */ - esp->scsi_id = 7; - - /* We don't have a differential SCSI-bus. */ - esp->diff = 0; - - esp_initialize(esp); - - printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use); - esps_running = esps_in_use; - return esps_in_use; - } - } - return 0; -} - -/************************************************************* DMA Functions */ -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count) -{ - /* Since the Blizzard DMA is fully dedicated to the ESP chip, - * the number of bytes sent (to the ESP chip) equals the number - * of bytes in the FIFO - there is no buffering in the DMA controller. - * XXXX Do I read this right? It is from host to ESP, right? - */ - return fifo_count; -} - -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - /* I don't think there's any limit on the Blizzard DMA. So we use what - * the ESP chip can handle (24 bit). - */ - unsigned long sz = sp->SCp.this_residual; - if(sz > 0x1000000) - sz = 0x1000000; - return sz; -} - -static void dma_dump_state(struct NCR_ESP *esp) -{ - ESPLOG(("intreq:<%04x>, intena:<%04x>\n", - amiga_custom.intreqr, amiga_custom.intenar)); -} - -static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length) -{ - struct blz2060_dma_registers *dregs = - (struct blz2060_dma_registers *) (esp->dregs); - - cache_clear(addr, length); - - addr >>= 1; - addr &= ~(BLZ2060_DMA_WRITE); - dregs->dma_addr3 = (addr ) & 0xff; - dregs->dma_addr2 = (addr >> 8) & 0xff; - dregs->dma_addr1 = (addr >> 16) & 0xff; - dregs->dma_addr0 = (addr >> 24) & 0xff; -} - -static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length) -{ - struct blz2060_dma_registers *dregs = - (struct blz2060_dma_registers *) (esp->dregs); - - cache_push(addr, length); - - addr >>= 1; - addr |= BLZ2060_DMA_WRITE; - dregs->dma_addr3 = (addr ) & 0xff; - dregs->dma_addr2 = (addr >> 8) & 0xff; - dregs->dma_addr1 = (addr >> 16) & 0xff; - dregs->dma_addr0 = (addr >> 24) & 0xff; -} - -static void dma_ints_off(struct NCR_ESP *esp) -{ - disable_irq(esp->irq); -} - -static void dma_ints_on(struct NCR_ESP *esp) -{ - enable_irq(esp->irq); -} - -static int dma_irq_p(struct NCR_ESP *esp) -{ - return (esp_read(esp->eregs->esp_status) & ESP_STAT_INTR); -} - -static void dma_led_off(struct NCR_ESP *esp) -{ - ((struct blz2060_dma_registers *) (esp->dregs))->dma_led_ctrl = - BLZ2060_DMA_LED; -} - -static void dma_led_on(struct NCR_ESP *esp) -{ - ((struct blz2060_dma_registers *) (esp->dregs))->dma_led_ctrl = 0; -} - -static int dma_ports_p(struct NCR_ESP *esp) -{ - return ((amiga_custom.intenar) & IF_PORTS); -} - -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write) -{ - /* On the Sparc, DMA_ST_WRITE means "move data from device to memory" - * so when (write) is true, it actually means READ! - */ - if(write){ - dma_init_read(esp, addr, count); - } else { - dma_init_write(esp, addr, count); - } -} - -#define HOSTS_C - -int blz2060_esp_release(struct Scsi_Host *instance) -{ -#ifdef MODULE - unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev; - - esp_deallocate((struct NCR_ESP *)instance->hostdata); - esp_release(); - release_mem_region(address, sizeof(struct ESP_regs)); - free_irq(IRQ_AMIGA_PORTS, esp_intr); -#endif - return 1; -} - - -static struct scsi_host_template driver_template = { - .proc_name = "esp-blz2060", - .proc_info = esp_proc_info, - .name = "Blizzard2060 SCSI", - .detect = blz2060_esp_detect, - .slave_alloc = esp_slave_alloc, - .slave_destroy = esp_slave_destroy, - .release = blz2060_esp_release, - .queuecommand = esp_queue, - .eh_abort_handler = esp_abort, - .eh_bus_reset_handler = esp_reset, - .can_queue = 7, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = ENABLE_CLUSTERING -}; - - -#include "scsi_module.c" - -MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/cyberstorm.c b/drivers/scsi/cyberstorm.c deleted file mode 100644 index c6b98a42e89..00000000000 --- a/drivers/scsi/cyberstorm.c +++ /dev/null @@ -1,377 +0,0 @@ -/* cyberstorm.c: Driver for CyberStorm SCSI Controller. - * - * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk) - * - * The CyberStorm SCSI driver is based on David S. Miller's ESP driver - * for the Sparc computers. - * - * This work was made possible by Phase5 who willingly (and most generously) - * supported me with hardware and all the information I needed. - */ - -/* TODO: - * - * 1) Figure out how to make a cleaner merge with the sparc driver with regard - * to the caches and the Sparc MMU mapping. - * 2) Make as few routines required outside the generic driver. A lot of the - * routines in this file used to be inline! - */ - -#include <linux/module.h> - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/blkdev.h> -#include <linux/proc_fs.h> -#include <linux/stat.h> -#include <linux/interrupt.h> - -#include "scsi.h" -#include <scsi/scsi_host.h> -#include "NCR53C9x.h" - -#include <linux/zorro.h> -#include <asm/irq.h> -#include <asm/amigaints.h> -#include <asm/amigahw.h> - -#include <asm/pgtable.h> - -/* The controller registers can be found in the Z2 config area at these - * offsets: - */ -#define CYBER_ESP_ADDR 0xf400 -#define CYBER_DMA_ADDR 0xf800 - - -/* The CyberStorm DMA interface */ -struct cyber_dma_registers { - volatile unsigned char dma_addr0; /* DMA address (MSB) [0x000] */ - unsigned char dmapad1[1]; - volatile unsigned char dma_addr1; /* DMA address [0x002] */ - unsigned char dmapad2[1]; - volatile unsigned char dma_addr2; /* DMA address [0x004] */ - unsigned char dmapad3[1]; - volatile unsigned char dma_addr3; /* DMA address (LSB) [0x006] */ - unsigned char dmapad4[0x3fb]; - volatile unsigned char cond_reg; /* DMA cond (ro) [0x402] */ -#define ctrl_reg cond_reg /* DMA control (wo) [0x402] */ -}; - -/* DMA control bits */ -#define CYBER_DMA_LED 0x80 /* HD led control 1 = on */ -#define CYBER_DMA_WRITE 0x40 /* DMA direction. 1 = write */ -#define CYBER_DMA_Z3 0x20 /* 16 (Z2) or 32 (CHIP/Z3) bit DMA transfer */ - -/* DMA status bits */ -#define CYBER_DMA_HNDL_INTR 0x80 /* DMA IRQ pending? */ - -/* The bits below appears to be Phase5 Debug bits only; they were not - * described by Phase5 so using them may seem a bit stupid... - */ -#define CYBER_HOST_ID 0x02 /* If set, host ID should be 7, otherwise - * it should be 6. - */ -#define CYBER_SLOW_CABLE 0x08 /* If *not* set, assume SLOW_CABLE */ - -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count); -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp); -static void dma_dump_state(struct NCR_ESP *esp); -static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length); -static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length); -static void dma_ints_off(struct NCR_ESP *esp); -static void dma_ints_on(struct NCR_ESP *esp); -static int dma_irq_p(struct NCR_ESP *esp); -static void dma_led_off(struct NCR_ESP *esp); -static void dma_led_on(struct NCR_ESP *esp); -static int dma_ports_p(struct NCR_ESP *esp); -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write); - -static unsigned char ctrl_data = 0; /* Keep backup of the stuff written - * to ctrl_reg. Always write a copy - * to this register when writing to - * the hardware register! - */ - -static volatile unsigned char cmd_buffer[16]; - /* This is where all commands are put - * before they are transferred to the ESP chip - * via PIO. - */ - -/***************************************************************** Detection */ -int __init cyber_esp_detect(struct scsi_host_template *tpnt) -{ - struct NCR_ESP *esp; - struct zorro_dev *z = NULL; - unsigned long address; - - while ((z = zorro_find_device(ZORRO_WILDCARD, z))) { - unsigned long board = z->resource.start; - if ((z->id == ZORRO_PROD_PHASE5_BLIZZARD_1220_CYBERSTORM || - z->id == ZORRO_PROD_PHASE5_BLIZZARD_1230_II_FASTLANE_Z3_CYBERSCSI_CYBERSTORM060) && - request_mem_region(board+CYBER_ESP_ADDR, - sizeof(struct ESP_regs), "NCR53C9x")) { - /* Figure out if this is a CyberStorm or really a - * Fastlane/Blizzard Mk II by looking at the board size. - * CyberStorm maps 64kB - * (ZORRO_PROD_PHASE5_BLIZZARD_1220_CYBERSTORM does anyway) - */ - if(z->resource.end-board != 0xffff) { - release_mem_region(board+CYBER_ESP_ADDR, - sizeof(struct ESP_regs)); - return 0; - } - esp = esp_allocate(tpnt, (void *)board + CYBER_ESP_ADDR, 0); - - /* Do command transfer with programmed I/O */ - esp->do_pio_cmds = 1; - - /* Required functions */ - esp->dma_bytes_sent = &dma_bytes_sent; - esp->dma_can_transfer = &dma_can_transfer; - esp->dma_dump_state = &dma_dump_state; - esp->dma_init_read = &dma_init_read; - esp->dma_init_write = &dma_init_write; - esp->dma_ints_off = &dma_ints_off; - esp->dma_ints_on = &dma_ints_on; - esp->dma_irq_p = &dma_irq_p; - esp->dma_ports_p = &dma_ports_p; - esp->dma_setup = &dma_setup; - - /* Optional functions */ - esp->dma_barrier = 0; - esp->dma_drain = 0; - esp->dma_invalidate = 0; - esp->dma_irq_entry = 0; - esp->dma_irq_exit = 0; - esp->dma_led_on = &dma_led_on; - esp->dma_led_off = &dma_led_off; - esp->dma_poll = 0; - esp->dma_reset = 0; - - /* SCSI chip speed */ - esp->cfreq = 40000000; - - /* The DMA registers on the CyberStorm are mapped - * relative to the device (i.e. in the same Zorro - * I/O block). - */ - address = (unsigned long)ZTWO_VADDR(board); - esp->dregs = (void *)(address + CYBER_DMA_ADDR); - - /* ESP register base */ - esp->eregs = (struct ESP_regs *)(address + CYBER_ESP_ADDR); - - /* Set the command buffer */ - esp->esp_command = cmd_buffer; - esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer); - - esp->irq = IRQ_AMIGA_PORTS; - request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED, - "CyberStorm SCSI", esp->ehost); - /* Figure out our scsi ID on the bus */ - /* The DMA cond flag contains a hardcoded jumper bit - * which can be used to select host number 6 or 7. - * However, even though it may change, we use a hardcoded - * value of 7. - */ - esp->scsi_id = 7; - - /* We don't have a differential SCSI-bus. */ - esp->diff = 0; - - esp_initialize(esp); - - printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use); - esps_running = esps_in_use; - return esps_in_use; - } - } - return 0; -} - -/************************************************************* DMA Functions */ -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count) -{ - /* Since the CyberStorm DMA is fully dedicated to the ESP chip, - * the number of bytes sent (to the ESP chip) equals the number - * of bytes in the FIFO - there is no buffering in the DMA controller. - * XXXX Do I read this right? It is from host to ESP, right? - */ - return fifo_count; -} - -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - /* I don't think there's any limit on the CyberDMA. So we use what - * the ESP chip can handle (24 bit). - */ - unsigned long sz = sp->SCp.this_residual; - if(sz > 0x1000000) - sz = 0x1000000; - return sz; -} - -static void dma_dump_state(struct NCR_ESP *esp) -{ - ESPLOG(("esp%d: dma -- cond_reg<%02x>\n", - esp->esp_id, ((struct cyber_dma_registers *) - (esp->dregs))->cond_reg)); - ESPLOG(("intreq:<%04x>, intena:<%04x>\n", - amiga_custom.intreqr, amiga_custom.intenar)); -} - -static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length) -{ - struct cyber_dma_registers *dregs = - (struct cyber_dma_registers *) esp->dregs; - - cache_clear(addr, length); - - addr &= ~(1); - dregs->dma_addr0 = (addr >> 24) & 0xff; - dregs->dma_addr1 = (addr >> 16) & 0xff; - dregs->dma_addr2 = (addr >> 8) & 0xff; - dregs->dma_addr3 = (addr ) & 0xff; - ctrl_data &= ~(CYBER_DMA_WRITE); - - /* Check if physical address is outside Z2 space and of - * block length/block aligned in memory. If this is the - * case, enable 32 bit transfer. In all other cases, fall back - * to 16 bit transfer. - * Obviously 32 bit transfer should be enabled if the DMA address - * and length are 32 bit aligned. However, this leads to some - * strange behavior. Even 64 bit aligned addr/length fails. - * Until I've found a reason for this, 32 bit transfer is only - * used for full-block transfers (1kB). - * -jskov - */ -#if 0 - if((addr & 0x3fc) || length & 0x3ff || ((addr > 0x200000) && - (addr < 0xff0000))) - ctrl_data &= ~(CYBER_DMA_Z3); /* Z2, do 16 bit DMA */ - else - ctrl_data |= CYBER_DMA_Z3; /* CHIP/Z3, do 32 bit DMA */ -#else - ctrl_data &= ~(CYBER_DMA_Z3); /* Z2, do 16 bit DMA */ -#endif - dregs->ctrl_reg = ctrl_data; -} - -static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length) -{ - struct cyber_dma_registers *dregs = - (struct cyber_dma_registers *) esp->dregs; - - cache_push(addr, length); - - addr |= 1; - dregs->dma_addr0 = (addr >> 24) & 0xff; - dregs->dma_addr1 = (addr >> 16) & 0xff; - dregs->dma_addr2 = (addr >> 8) & 0xff; - dregs->dma_addr3 = (addr ) & 0xff; - ctrl_data |= CYBER_DMA_WRITE; - - /* See comment above */ -#if 0 - if((addr & 0x3fc) || length & 0x3ff || ((addr > 0x200000) && - (addr < 0xff0000))) - ctrl_data &= ~(CYBER_DMA_Z3); /* Z2, do 16 bit DMA */ - else - ctrl_data |= CYBER_DMA_Z3; /* CHIP/Z3, do 32 bit DMA */ -#else - ctrl_data &= ~(CYBER_DMA_Z3); /* Z2, do 16 bit DMA */ -#endif - dregs->ctrl_reg = ctrl_data; -} - -static void dma_ints_off(struct NCR_ESP *esp) -{ - disable_irq(esp->irq); -} - -static void dma_ints_on(struct NCR_ESP *esp) -{ - enable_irq(esp->irq); -} - -static int dma_irq_p(struct NCR_ESP *esp) -{ - /* It's important to check the DMA IRQ bit in the correct way! */ - return ((esp_read(esp->eregs->esp_status) & ESP_STAT_INTR) && - ((((struct cyber_dma_registers *)(esp->dregs))->cond_reg) & - CYBER_DMA_HNDL_INTR)); -} - -static void dma_led_off(struct NCR_ESP *esp) -{ - ctrl_data &= ~CYBER_DMA_LED; - ((struct cyber_dma_registers *)(esp->dregs))->ctrl_reg = ctrl_data; -} - -static void dma_led_on(struct NCR_ESP *esp) -{ - ctrl_data |= CYBER_DMA_LED; - ((struct cyber_dma_registers *)(esp->dregs))->ctrl_reg = ctrl_data; -} - -static int dma_ports_p(struct NCR_ESP *esp) -{ - return ((amiga_custom.intenar) & IF_PORTS); -} - -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write) -{ - /* On the Sparc, DMA_ST_WRITE means "move data from device to memory" - * so when (write) is true, it actually means READ! - */ - if(write){ - dma_init_read(esp, addr, count); - } else { - dma_init_write(esp, addr, count); - } -} - -#define HOSTS_C - -int cyber_esp_release(struct Scsi_Host *instance) -{ -#ifdef MODULE - unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev; - - esp_deallocate((struct NCR_ESP *)instance->hostdata); - esp_release(); - release_mem_region(address, sizeof(struct ESP_regs)); - free_irq(IRQ_AMIGA_PORTS, esp_intr); -#endif - return 1; -} - - -static struct scsi_host_template driver_template = { - .proc_name = "esp-cyberstorm", - .proc_info = esp_proc_info, - .name = "CyberStorm SCSI", - .detect = cyber_esp_detect, - .slave_alloc = esp_slave_alloc, - .slave_destroy = esp_slave_destroy, - .release = cyber_esp_release, - .queuecommand = esp_queue, - .eh_abort_handler = esp_abort, - .eh_bus_reset_handler = esp_reset, - .can_queue = 7, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = ENABLE_CLUSTERING -}; - - -#include "scsi_module.c" - -MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/cyberstormII.c b/drivers/scsi/cyberstormII.c deleted file mode 100644 index e336e853e66..00000000000 --- a/drivers/scsi/cyberstormII.c +++ /dev/null @@ -1,314 +0,0 @@ -/* cyberstormII.c: Driver for CyberStorm SCSI Mk II - * - * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk) - * - * This driver is based on cyberstorm.c - */ - -/* TODO: - * - * 1) Figure out how to make a cleaner merge with the sparc driver with regard - * to the caches and the Sparc MMU mapping. - * 2) Make as few routines required outside the generic driver. A lot of the - * routines in this file used to be inline! - */ - -#include <linux/module.h> - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/blkdev.h> -#include <linux/proc_fs.h> -#include <linux/stat.h> -#include <linux/interrupt.h> - -#include "scsi.h" -#include <scsi/scsi_host.h> -#include "NCR53C9x.h" - -#include <linux/zorro.h> -#include <asm/irq.h> -#include <asm/amigaints.h> -#include <asm/amigahw.h> - -#include <asm/pgtable.h> - -/* The controller registers can be found in the Z2 config area at these - * offsets: - */ -#define CYBERII_ESP_ADDR 0x1ff03 -#define CYBERII_DMA_ADDR 0x1ff43 - - -/* The CyberStorm II DMA interface */ -struct cyberII_dma_registers { - volatile unsigned char cond_reg; /* DMA cond (ro) [0x000] */ -#define ctrl_reg cond_reg /* DMA control (wo) [0x000] */ - unsigned char dmapad4[0x3f]; - volatile unsigned char dma_addr0; /* DMA address (MSB) [0x040] */ - unsigned char dmapad1[3]; - volatile unsigned char dma_addr1; /* DMA address [0x044] */ - unsigned char dmapad2[3]; - volatile unsigned char dma_addr2; /* DMA address [0x048] */ - unsigned char dmapad3[3]; - volatile unsigned char dma_addr3; /* DMA address (LSB) [0x04c] */ -}; - -/* DMA control bits */ -#define CYBERII_DMA_LED 0x02 /* HD led control 1 = on */ - -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count); -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp); -static void dma_dump_state(struct NCR_ESP *esp); -static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length); -static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length); -static void dma_ints_off(struct NCR_ESP *esp); -static void dma_ints_on(struct NCR_ESP *esp); -static int dma_irq_p(struct NCR_ESP *esp); -static void dma_led_off(struct NCR_ESP *esp); -static void dma_led_on(struct NCR_ESP *esp); -static int dma_ports_p(struct NCR_ESP *esp); -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write); - -static volatile unsigned char cmd_buffer[16]; - /* This is where all commands are put - * before they are transferred to the ESP chip - * via PIO. - */ - -/***************************************************************** Detection */ -int __init cyberII_esp_detect(struct scsi_host_template *tpnt) -{ - struct NCR_ESP *esp; - struct zorro_dev *z = NULL; - unsigned long address; - struct ESP_regs *eregs; - - if ((z = zorro_find_device(ZORRO_PROD_PHASE5_CYBERSTORM_MK_II, z))) { - unsigned long board = z->resource.start; - if (request_mem_region(board+CYBERII_ESP_ADDR, - sizeof(struct ESP_regs), "NCR53C9x")) { - /* Do some magic to figure out if the CyberStorm Mk II - * is equipped with a SCSI controller - */ - address = (unsigned long)ZTWO_VADDR(board); - eregs = (struct ESP_regs *)(address + CYBERII_ESP_ADDR); - - esp = esp_allocate(tpnt, (void *)board + CYBERII_ESP_ADDR, 0); - - esp_write(eregs->esp_cfg1, (ESP_CONFIG1_PENABLE | 7)); - udelay(5); - if(esp_read(eregs->esp_cfg1) != (ESP_CONFIG1_PENABLE | 7)) { - esp_deallocate(esp); - scsi_unregister(esp->ehost); - release_mem_region(board+CYBERII_ESP_ADDR, - sizeof(struct ESP_regs)); - return 0; /* Bail out if address did not hold data */ - } - - /* Do command transfer with programmed I/O */ - esp->do_pio_cmds = 1; - - /* Required functions */ - esp->dma_bytes_sent = &dma_bytes_sent; - esp->dma_can_transfer = &dma_can_transfer; - esp->dma_dump_state = &dma_dump_state; - esp->dma_init_read = &dma_init_read; - esp->dma_init_write = &dma_init_write; - esp->dma_ints_off = &dma_ints_off; - esp->dma_ints_on = &dma_ints_on; - esp->dma_irq_p = &dma_irq_p; - esp->dma_ports_p = &dma_ports_p; - esp->dma_setup = &dma_setup; - - /* Optional functions */ - esp->dma_barrier = 0; - esp->dma_drain = 0; - esp->dma_invalidate = 0; - esp->dma_irq_entry = 0; - esp->dma_irq_exit = 0; - esp->dma_led_on = &dma_led_on; - esp->dma_led_off = &dma_led_off; - esp->dma_poll = 0; - esp->dma_reset = 0; - - /* SCSI chip speed */ - esp->cfreq = 40000000; - - /* The DMA registers on the CyberStorm are mapped - * relative to the device (i.e. in the same Zorro - * I/O block). - */ - esp->dregs = (void *)(address + CYBERII_DMA_ADDR); - - /* ESP register base */ - esp->eregs = eregs; - - /* Set the command buffer */ - esp->esp_command = cmd_buffer; - esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer); - - esp->irq = IRQ_AMIGA_PORTS; - request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED, - "CyberStorm SCSI Mk II", esp->ehost); - - /* Figure out our scsi ID on the bus */ - esp->scsi_id = 7; - - /* We don't have a differential SCSI-bus. */ - esp->diff = 0; - - esp_initialize(esp); - - printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use); - esps_running = esps_in_use; - return esps_in_use; - } - } - return 0; -} - -/************************************************************* DMA Functions */ -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count) -{ - /* Since the CyberStorm DMA is fully dedicated to the ESP chip, - * the number of bytes sent (to the ESP chip) equals the number - * of bytes in the FIFO - there is no buffering in the DMA controller. - * XXXX Do I read this right? It is from host to ESP, right? - */ - return fifo_count; -} - -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - /* I don't think there's any limit on the CyberDMA. So we use what - * the ESP chip can handle (24 bit). - */ - unsigned long sz = sp->SCp.this_residual; - if(sz > 0x1000000) - sz = 0x1000000; - return sz; -} - -static void dma_dump_state(struct NCR_ESP *esp) -{ - ESPLOG(("esp%d: dma -- cond_reg<%02x>\n", - esp->esp_id, ((struct cyberII_dma_registers *) - (esp->dregs))->cond_reg)); - ESPLOG(("intreq:<%04x>, intena:<%04x>\n", - amiga_custom.intreqr, amiga_custom.intenar)); -} - -static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length) -{ - struct cyberII_dma_registers *dregs = - (struct cyberII_dma_registers *) esp->dregs; - - cache_clear(addr, length); - - addr &= ~(1); - dregs->dma_addr0 = (addr >> 24) & 0xff; - dregs->dma_addr1 = (addr >> 16) & 0xff; - dregs->dma_addr2 = (addr >> 8) & 0xff; - dregs->dma_addr3 = (addr ) & 0xff; -} - -static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length) -{ - struct cyberII_dma_registers *dregs = - (struct cyberII_dma_registers *) esp->dregs; - - cache_push(addr, length); - - addr |= 1; - dregs->dma_addr0 = (addr >> 24) & 0xff; - dregs->dma_addr1 = (addr >> 16) & 0xff; - dregs->dma_addr2 = (addr >> 8) & 0xff; - dregs->dma_addr3 = (addr ) & 0xff; -} - -static void dma_ints_off(struct NCR_ESP *esp) -{ - disable_irq(esp->irq); -} - -static void dma_ints_on(struct NCR_ESP *esp) -{ - enable_irq(esp->irq); -} - -static int dma_irq_p(struct NCR_ESP *esp) -{ - /* It's important to check the DMA IRQ bit in the correct way! */ - return (esp_read(esp->eregs->esp_status) & ESP_STAT_INTR); -} - -static void dma_led_off(struct NCR_ESP *esp) -{ - ((struct cyberII_dma_registers *)(esp->dregs))->ctrl_reg &= ~CYBERII_DMA_LED; -} - -static void dma_led_on(struct NCR_ESP *esp) -{ - ((struct cyberII_dma_registers *)(esp->dregs))->ctrl_reg |= CYBERII_DMA_LED; -} - -static int dma_ports_p(struct NCR_ESP *esp) -{ - return ((amiga_custom.intenar) & IF_PORTS); -} - -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write) -{ - /* On the Sparc, DMA_ST_WRITE means "move data from device to memory" - * so when (write) is true, it actually means READ! - */ - if(write){ - dma_init_read(esp, addr, count); - } else { - dma_init_write(esp, addr, count); - } -} - -#define HOSTS_C - -int cyberII_esp_release(struct Scsi_Host *instance) -{ -#ifdef MODULE - unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev; - - esp_deallocate((struct NCR_ESP *)instance->hostdata); - esp_release(); - release_mem_region(address, sizeof(struct ESP_regs)); - free_irq(IRQ_AMIGA_PORTS, esp_intr); -#endif - return 1; -} - - -static struct scsi_host_template driver_template = { - .proc_name = "esp-cyberstormII", - .proc_info = esp_proc_info, - .name = "CyberStorm Mk II SCSI", - .detect = cyberII_esp_detect, - .slave_alloc = esp_slave_alloc, - .slave_destroy = esp_slave_destroy, - .release = cyberII_esp_release, - .queuecommand = esp_queue, - .eh_abort_handler = esp_abort, - .eh_bus_reset_handler = esp_reset, - .can_queue = 7, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = ENABLE_CLUSTERING -}; - - -#include "scsi_module.c" - -MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c index 22ef3716e78..e351db6c007 100644 --- a/drivers/scsi/dc395x.c +++ b/drivers/scsi/dc395x.c @@ -4267,7 +4267,7 @@ static int __devinit adapter_sg_tables_alloc(struct AdapterCtlBlk *acb) const unsigned srbs_per_page = PAGE_SIZE/SEGMENTX_LEN; int srb_idx = 0; unsigned i = 0; - struct SGentry *ptr; + struct SGentry *uninitialized_var(ptr); for (i = 0; i < DC395x_MAX_SRB_CNT; i++) acb->srb_array[i].segment_x = NULL; diff --git a/drivers/scsi/dec_esp.c b/drivers/scsi/dec_esp.c deleted file mode 100644 index d42ad663ffe..00000000000 --- a/drivers/scsi/dec_esp.c +++ /dev/null @@ -1,687 +0,0 @@ -/* - * dec_esp.c: Driver for SCSI chips on IOASIC based TURBOchannel DECstations - * and TURBOchannel PMAZ-A cards - * - * TURBOchannel changes by Harald Koerfgen - * PMAZ-A support by David Airlie - * - * based on jazz_esp.c: - * Copyright (C) 1997 Thomas Bogendoerfer (tsbogend@alpha.franken.de) - * - * jazz_esp is based on David S. Miller's ESP driver and cyber_esp - * - * 20000819 - Small PMAZ-AA fixes by Florian Lohoff <flo@rfc822.org> - * Be warned the PMAZ-AA works currently as a single card. - * Dont try to put multiple cards in one machine - They are - * both detected but it may crash under high load garbling your - * data. - * 20001005 - Initialization fixes for 2.4.0-test9 - * Florian Lohoff <flo@rfc822.org> - * - * Copyright (C) 2002, 2003, 2005, 2006 Maciej W. Rozycki - */ - -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/blkdev.h> -#include <linux/proc_fs.h> -#include <linux/spinlock.h> -#include <linux/stat.h> -#include <linux/tc.h> - -#include <asm/dma.h> -#include <asm/irq.h> -#include <asm/pgtable.h> -#include <asm/system.h> - -#include <asm/dec/interrupts.h> -#include <asm/dec/ioasic.h> -#include <asm/dec/ioasic_addrs.h> -#include <asm/dec/ioasic_ints.h> -#include <asm/dec/machtype.h> -#include <asm/dec/system.h> - -#define DEC_SCSI_SREG 0 -#define DEC_SCSI_DMAREG 0x40000 -#define DEC_SCSI_SRAM 0x80000 -#define DEC_SCSI_DIAG 0xC0000 - -#include "scsi.h" -#include <scsi/scsi_host.h> -#include "NCR53C9x.h" - -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count); -static void dma_drain(struct NCR_ESP *esp); -static int dma_can_transfer(struct NCR_ESP *esp, struct scsi_cmnd *sp); -static void dma_dump_state(struct NCR_ESP *esp); -static void dma_init_read(struct NCR_ESP *esp, u32 vaddress, int length); -static void dma_init_write(struct NCR_ESP *esp, u32 vaddress, int length); -static void dma_ints_off(struct NCR_ESP *esp); -static void dma_ints_on(struct NCR_ESP *esp); -static int dma_irq_p(struct NCR_ESP *esp); -static int dma_ports_p(struct NCR_ESP *esp); -static void dma_setup(struct NCR_ESP *esp, u32 addr, int count, int write); -static void dma_mmu_get_scsi_one(struct NCR_ESP *esp, struct scsi_cmnd * sp); -static void dma_mmu_get_scsi_sgl(struct NCR_ESP *esp, struct scsi_cmnd * sp); -static void dma_advance_sg(struct scsi_cmnd * sp); - -static void pmaz_dma_drain(struct NCR_ESP *esp); -static void pmaz_dma_init_read(struct NCR_ESP *esp, u32 vaddress, int length); -static void pmaz_dma_init_write(struct NCR_ESP *esp, u32 vaddress, int length); -static void pmaz_dma_ints_off(struct NCR_ESP *esp); -static void pmaz_dma_ints_on(struct NCR_ESP *esp); -static void pmaz_dma_setup(struct NCR_ESP *esp, u32 addr, int count, int write); -static void pmaz_dma_mmu_get_scsi_one(struct NCR_ESP *esp, struct scsi_cmnd * sp); - -#define TC_ESP_RAM_SIZE 0x20000 -#define ESP_TGT_DMA_SIZE ((TC_ESP_RAM_SIZE/7) & ~(sizeof(int)-1)) -#define ESP_NCMD 7 - -#define TC_ESP_DMAR_MASK 0x1ffff -#define TC_ESP_DMAR_WRITE 0x80000000 -#define TC_ESP_DMA_ADDR(x) ((unsigned)(x) & TC_ESP_DMAR_MASK) - -u32 esp_virt_buffer; -int scsi_current_length; - -volatile unsigned char cmd_buffer[16]; -volatile unsigned char pmaz_cmd_buffer[16]; - /* This is where all commands are put - * before they are trasfered to the ESP chip - * via PIO. - */ - -static irqreturn_t scsi_dma_merr_int(int, void *); -static irqreturn_t scsi_dma_err_int(int, void *); -static irqreturn_t scsi_dma_int(int, void *); - -static struct scsi_host_template dec_esp_template = { - .module = THIS_MODULE, - .name = "NCR53C94", - .info = esp_info, - .queuecommand = esp_queue, - .eh_abort_handler = esp_abort, - .eh_bus_reset_handler = esp_reset, - .slave_alloc = esp_slave_alloc, - .slave_destroy = esp_slave_destroy, - .proc_info = esp_proc_info, - .proc_name = "dec_esp", - .can_queue = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = DISABLE_CLUSTERING, -}; - -static struct NCR_ESP *dec_esp_platform; - -/***************************************************************** Detection */ -static int dec_esp_platform_probe(void) -{ - struct NCR_ESP *esp; - int err = 0; - - if (IOASIC) { - esp = esp_allocate(&dec_esp_template, NULL, 1); - - /* Do command transfer with programmed I/O */ - esp->do_pio_cmds = 1; - - /* Required functions */ - esp->dma_bytes_sent = &dma_bytes_sent; - esp->dma_can_transfer = &dma_can_transfer; - esp->dma_dump_state = &dma_dump_state; - esp->dma_init_read = &dma_init_read; - esp->dma_init_write = &dma_init_write; - esp->dma_ints_off = &dma_ints_off; - esp->dma_ints_on = &dma_ints_on; - esp->dma_irq_p = &dma_irq_p; - esp->dma_ports_p = &dma_ports_p; - esp->dma_setup = &dma_setup; - - /* Optional functions */ - esp->dma_barrier = 0; - esp->dma_drain = &dma_drain; - esp->dma_invalidate = 0; - esp->dma_irq_entry = 0; - esp->dma_irq_exit = 0; - esp->dma_poll = 0; - esp->dma_reset = 0; - esp->dma_led_off = 0; - esp->dma_led_on = 0; - - /* virtual DMA functions */ - esp->dma_mmu_get_scsi_one = &dma_mmu_get_scsi_one; - esp->dma_mmu_get_scsi_sgl = &dma_mmu_get_scsi_sgl; - esp->dma_mmu_release_scsi_one = 0; - esp->dma_mmu_release_scsi_sgl = 0; - esp->dma_advance_sg = &dma_advance_sg; - - - /* SCSI chip speed */ - esp->cfreq = 25000000; - - esp->dregs = 0; - - /* ESP register base */ - esp->eregs = (void *)CKSEG1ADDR(dec_kn_slot_base + - IOASIC_SCSI); - - /* Set the command buffer */ - esp->esp_command = (volatile unsigned char *) cmd_buffer; - - /* get virtual dma address for command buffer */ - esp->esp_command_dvma = virt_to_phys(cmd_buffer); - - esp->irq = dec_interrupt[DEC_IRQ_ASC]; - - esp->scsi_id = 7; - - /* Check for differential SCSI-bus */ - esp->diff = 0; - - err = request_irq(esp->irq, esp_intr, IRQF_DISABLED, - "ncr53c94", esp->ehost); - if (err) - goto err_alloc; - err = request_irq(dec_interrupt[DEC_IRQ_ASC_MERR], - scsi_dma_merr_int, IRQF_DISABLED, - "ncr53c94 error", esp->ehost); - if (err) - goto err_irq; - err = request_irq(dec_interrupt[DEC_IRQ_ASC_ERR], - scsi_dma_err_int, IRQF_DISABLED, - "ncr53c94 overrun", esp->ehost); - if (err) - goto err_irq_merr; - err = request_irq(dec_interrupt[DEC_IRQ_ASC_DMA], scsi_dma_int, - IRQF_DISABLED, "ncr53c94 dma", esp->ehost); - if (err) - goto err_irq_err; - - esp_initialize(esp); - - err = scsi_add_host(esp->ehost, NULL); - if (err) { - printk(KERN_ERR "ESP: Unable to register adapter\n"); - goto err_irq_dma; - } - - scsi_scan_host(esp->ehost); - - dec_esp_platform = esp; - } - - return 0; - -err_irq_dma: - free_irq(dec_interrupt[DEC_IRQ_ASC_DMA], esp->ehost); -err_irq_err: - free_irq(dec_interrupt[DEC_IRQ_ASC_ERR], esp->ehost); -err_irq_merr: - free_irq(dec_interrupt[DEC_IRQ_ASC_MERR], esp->ehost); -err_irq: - free_irq(esp->irq, esp->ehost); -err_alloc: - esp_deallocate(esp); - scsi_host_put(esp->ehost); - return err; -} - -static int __init dec_esp_probe(struct device *dev) -{ - struct NCR_ESP *esp; - resource_size_t start, len; - int err; - - esp = esp_allocate(&dec_esp_template, NULL, 1); - - dev_set_drvdata(dev, esp); - - start = to_tc_dev(dev)->resource.start; - len = to_tc_dev(dev)->resource.end - start + 1; - - if (!request_mem_region(start, len, dev->bus_id)) { - printk(KERN_ERR "%s: Unable to reserve MMIO resource\n", - dev->bus_id); - err = -EBUSY; - goto err_alloc; - } - - /* Store base addr into esp struct. */ - esp->slot = start; - - esp->dregs = 0; - esp->eregs = (void *)CKSEG1ADDR(start + DEC_SCSI_SREG); - esp->do_pio_cmds = 1; - - /* Set the command buffer. */ - esp->esp_command = (volatile unsigned char *)pmaz_cmd_buffer; - - /* Get virtual dma address for command buffer. */ - esp->esp_command_dvma = virt_to_phys(pmaz_cmd_buffer); - - esp->cfreq = tc_get_speed(to_tc_dev(dev)->bus); - - esp->irq = to_tc_dev(dev)->interrupt; - - /* Required functions. */ - esp->dma_bytes_sent = &dma_bytes_sent; - esp->dma_can_transfer = &dma_can_transfer; - esp->dma_dump_state = &dma_dump_state; - esp->dma_init_read = &pmaz_dma_init_read; - esp->dma_init_write = &pmaz_dma_init_write; - esp->dma_ints_off = &pmaz_dma_ints_off; - esp->dma_ints_on = &pmaz_dma_ints_on; - esp->dma_irq_p = &dma_irq_p; - esp->dma_ports_p = &dma_ports_p; - esp->dma_setup = &pmaz_dma_setup; - - /* Optional functions. */ - esp->dma_barrier = 0; - esp->dma_drain = &pmaz_dma_drain; - esp->dma_invalidate = 0; - esp->dma_irq_entry = 0; - esp->dma_irq_exit = 0; - esp->dma_poll = 0; - esp->dma_reset = 0; - esp->dma_led_off = 0; - esp->dma_led_on = 0; - - esp->dma_mmu_get_scsi_one = pmaz_dma_mmu_get_scsi_one; - esp->dma_mmu_get_scsi_sgl = 0; - esp->dma_mmu_release_scsi_one = 0; - esp->dma_mmu_release_scsi_sgl = 0; - esp->dma_advance_sg = 0; - - err = request_irq(esp->irq, esp_intr, IRQF_DISABLED, "PMAZ_AA", - esp->ehost); - if (err) { - printk(KERN_ERR "%s: Unable to get IRQ %d\n", - dev->bus_id, esp->irq); - goto err_resource; - } - - esp->scsi_id = 7; - esp->diff = 0; - esp_initialize(esp); - - err = scsi_add_host(esp->ehost, dev); - if (err) { - printk(KERN_ERR "%s: Unable to register adapter\n", - dev->bus_id); - goto err_irq; - } - - scsi_scan_host(esp->ehost); - - return 0; - -err_irq: - free_irq(esp->irq, esp->ehost); - -err_resource: - release_mem_region(start, len); - -err_alloc: - esp_deallocate(esp); - scsi_host_put(esp->ehost); - return err; -} - -static void __exit dec_esp_platform_remove(void) -{ - struct NCR_ESP *esp = dec_esp_platform; - - free_irq(esp->irq, esp->ehost); - esp_deallocate(esp); - scsi_host_put(esp->ehost); - dec_esp_platform = NULL; -} - -static void __exit dec_esp_remove(struct device *dev) -{ - struct NCR_ESP *esp = dev_get_drvdata(dev); - - free_irq(esp->irq, esp->ehost); - esp_deallocate(esp); - scsi_host_put(esp->ehost); -} - - -/************************************************************* DMA Functions */ -static irqreturn_t scsi_dma_merr_int(int irq, void *dev_id) -{ - printk("Got unexpected SCSI DMA Interrupt! < "); - printk("SCSI_DMA_MEMRDERR "); - printk(">\n"); - - return IRQ_HANDLED; -} - -static irqreturn_t scsi_dma_err_int(int irq, void *dev_id) -{ - /* empty */ - - return IRQ_HANDLED; -} - -static irqreturn_t scsi_dma_int(int irq, void *dev_id) -{ - u32 scsi_next_ptr; - - scsi_next_ptr = ioasic_read(IO_REG_SCSI_DMA_P); - - /* next page */ - scsi_next_ptr = (((scsi_next_ptr >> 3) + PAGE_SIZE) & PAGE_MASK) << 3; - ioasic_write(IO_REG_SCSI_DMA_BP, scsi_next_ptr); - fast_iob(); - - return IRQ_HANDLED; -} - -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count) -{ - return fifo_count; -} - -static void dma_drain(struct NCR_ESP *esp) -{ - u32 nw, data0, data1, scsi_data_ptr; - u16 *p; - - nw = ioasic_read(IO_REG_SCSI_SCR); - - /* - * Is there something in the dma buffers left? - */ - if (nw) { - scsi_data_ptr = ioasic_read(IO_REG_SCSI_DMA_P) >> 3; - p = phys_to_virt(scsi_data_ptr); - switch (nw) { - case 1: - data0 = ioasic_read(IO_REG_SCSI_SDR0); - p[0] = data0 & 0xffff; - break; - case 2: - data0 = ioasic_read(IO_REG_SCSI_SDR0); - p[0] = data0 & 0xffff; - p[1] = (data0 >> 16) & 0xffff; - break; - case 3: - data0 = ioasic_read(IO_REG_SCSI_SDR0); - data1 = ioasic_read(IO_REG_SCSI_SDR1); - p[0] = data0 & 0xffff; - p[1] = (data0 >> 16) & 0xffff; - p[2] = data1 & 0xffff; - break; - default: - printk("Strange: %d words in dma buffer left\n", nw); - break; - } - } -} - -static int dma_can_transfer(struct NCR_ESP *esp, struct scsi_cmnd * sp) -{ - return sp->SCp.this_residual; -} - -static void dma_dump_state(struct NCR_ESP *esp) -{ -} - -static void dma_init_read(struct NCR_ESP *esp, u32 vaddress, int length) -{ - u32 scsi_next_ptr, ioasic_ssr; - unsigned long flags; - - if (vaddress & 3) - panic("dec_esp.c: unable to handle partial word transfers, yet..."); - - dma_cache_wback_inv((unsigned long) phys_to_virt(vaddress), length); - - spin_lock_irqsave(&ioasic_ssr_lock, flags); - - fast_mb(); - ioasic_ssr = ioasic_read(IO_REG_SSR); - - ioasic_ssr &= ~IO_SSR_SCSI_DMA_EN; - ioasic_write(IO_REG_SSR, ioasic_ssr); - - fast_wmb(); - ioasic_write(IO_REG_SCSI_SCR, 0); - ioasic_write(IO_REG_SCSI_DMA_P, vaddress << 3); - - /* prepare for next page */ - scsi_next_ptr = ((vaddress + PAGE_SIZE) & PAGE_MASK) << 3; - ioasic_write(IO_REG_SCSI_DMA_BP, scsi_next_ptr); - - ioasic_ssr |= (IO_SSR_SCSI_DMA_DIR | IO_SSR_SCSI_DMA_EN); - fast_wmb(); - ioasic_write(IO_REG_SSR, ioasic_ssr); - - fast_iob(); - spin_unlock_irqrestore(&ioasic_ssr_lock, flags); -} - -static void dma_init_write(struct NCR_ESP *esp, u32 vaddress, int length) -{ - u32 scsi_next_ptr, ioasic_ssr; - unsigned long flags; - - if (vaddress & 3) - panic("dec_esp.c: unable to handle partial word transfers, yet..."); - - dma_cache_wback_inv((unsigned long) phys_to_virt(vaddress), length); - - spin_lock_irqsave(&ioasic_ssr_lock, flags); - - fast_mb(); - ioasic_ssr = ioasic_read(IO_REG_SSR); - - ioasic_ssr &= ~(IO_SSR_SCSI_DMA_DIR | IO_SSR_SCSI_DMA_EN); - ioasic_write(IO_REG_SSR, ioasic_ssr); - - fast_wmb(); - ioasic_write(IO_REG_SCSI_SCR, 0); - ioasic_write(IO_REG_SCSI_DMA_P, vaddress << 3); - - /* prepare for next page */ - scsi_next_ptr = ((vaddress + PAGE_SIZE) & PAGE_MASK) << 3; - ioasic_write(IO_REG_SCSI_DMA_BP, scsi_next_ptr); - - ioasic_ssr |= IO_SSR_SCSI_DMA_EN; - fast_wmb(); - ioasic_write(IO_REG_SSR, ioasic_ssr); - - fast_iob(); - spin_unlock_irqrestore(&ioasic_ssr_lock, flags); -} - -static void dma_ints_off(struct NCR_ESP *esp) -{ - disable_irq(dec_interrupt[DEC_IRQ_ASC_DMA]); -} - -static void dma_ints_on(struct NCR_ESP *esp) -{ - enable_irq(dec_interrupt[DEC_IRQ_ASC_DMA]); -} - -static int dma_irq_p(struct NCR_ESP *esp) -{ - return (esp->eregs->esp_status & ESP_STAT_INTR); -} - -static int dma_ports_p(struct NCR_ESP *esp) -{ - /* - * FIXME: what's this good for? - */ - return 1; -} - -static void dma_setup(struct NCR_ESP *esp, u32 addr, int count, int write) -{ - /* - * DMA_ST_WRITE means "move data from device to memory" - * so when (write) is true, it actually means READ! - */ - if (write) - dma_init_read(esp, addr, count); - else - dma_init_write(esp, addr, count); -} - -static void dma_mmu_get_scsi_one(struct NCR_ESP *esp, struct scsi_cmnd * sp) -{ - sp->SCp.ptr = (char *)virt_to_phys(sp->request_buffer); -} - -static void dma_mmu_get_scsi_sgl(struct NCR_ESP *esp, struct scsi_cmnd * sp) -{ - int sz = sp->SCp.buffers_residual; - struct scatterlist *sg = sp->SCp.buffer; - - while (sz >= 0) { - sg[sz].dma_address = page_to_phys(sg[sz].page) + sg[sz].offset; - sz--; - } - sp->SCp.ptr = (char *)(sp->SCp.buffer->dma_address); -} - -static void dma_advance_sg(struct scsi_cmnd * sp) -{ - sp->SCp.ptr = (char *)(sp->SCp.buffer->dma_address); -} - -static void pmaz_dma_drain(struct NCR_ESP *esp) -{ - memcpy(phys_to_virt(esp_virt_buffer), - (void *)CKSEG1ADDR(esp->slot + DEC_SCSI_SRAM + - ESP_TGT_DMA_SIZE), - scsi_current_length); -} - -static void pmaz_dma_init_read(struct NCR_ESP *esp, u32 vaddress, int length) -{ - volatile u32 *dmareg = - (volatile u32 *)CKSEG1ADDR(esp->slot + DEC_SCSI_DMAREG); - - if (length > ESP_TGT_DMA_SIZE) - length = ESP_TGT_DMA_SIZE; - - *dmareg = TC_ESP_DMA_ADDR(ESP_TGT_DMA_SIZE); - - iob(); - - esp_virt_buffer = vaddress; - scsi_current_length = length; -} - -static void pmaz_dma_init_write(struct NCR_ESP *esp, u32 vaddress, int length) -{ - volatile u32 *dmareg = - (volatile u32 *)CKSEG1ADDR(esp->slot + DEC_SCSI_DMAREG); - - memcpy((void *)CKSEG1ADDR(esp->slot + DEC_SCSI_SRAM + - ESP_TGT_DMA_SIZE), - phys_to_virt(vaddress), length); - - wmb(); - *dmareg = TC_ESP_DMAR_WRITE | TC_ESP_DMA_ADDR(ESP_TGT_DMA_SIZE); - - iob(); -} - -static void pmaz_dma_ints_off(struct NCR_ESP *esp) -{ -} - -static void pmaz_dma_ints_on(struct NCR_ESP *esp) -{ -} - -static void pmaz_dma_setup(struct NCR_ESP *esp, u32 addr, int count, int write) -{ - /* - * DMA_ST_WRITE means "move data from device to memory" - * so when (write) is true, it actually means READ! - */ - if (write) - pmaz_dma_init_read(esp, addr, count); - else - pmaz_dma_init_write(esp, addr, count); -} - -static void pmaz_dma_mmu_get_scsi_one(struct NCR_ESP *esp, struct scsi_cmnd * sp) -{ - sp->SCp.ptr = (char *)virt_to_phys(sp->request_buffer); -} - - -#ifdef CONFIG_TC -static int __init dec_esp_tc_probe(struct device *dev); -static int __exit dec_esp_tc_remove(struct device *dev); - -static const struct tc_device_id dec_esp_tc_table[] = { - { "DEC ", "PMAZ-AA " }, - { } -}; -MODULE_DEVICE_TABLE(tc, dec_esp_tc_table); - -static struct tc_driver dec_esp_tc_driver = { - .id_table = dec_esp_tc_table, - .driver = { - .name = "dec_esp", - .bus = &tc_bus_type, - .probe = dec_esp_tc_probe, - .remove = __exit_p(dec_esp_tc_remove), - }, -}; - -static int __init dec_esp_tc_probe(struct device *dev) -{ - int status = dec_esp_probe(dev); - if (!status) - get_device(dev); - return status; -} - -static int __exit dec_esp_tc_remove(struct device *dev) -{ - put_device(dev); - dec_esp_remove(dev); - return 0; -} -#endif - -static int __init dec_esp_init(void) -{ - int status; - - status = tc_register_driver(&dec_esp_tc_driver); - if (!status) - dec_esp_platform_probe(); - - if (nesps) { - pr_info("ESP: Total of %d ESP hosts found, " - "%d actually in use.\n", nesps, esps_in_use); - esps_running = esps_in_use; - } - - return status; -} - -static void __exit dec_esp_exit(void) -{ - dec_esp_platform_remove(); - tc_unregister_driver(&dec_esp_tc_driver); -} - - -module_init(dec_esp_init); -module_exit(dec_esp_exit); diff --git a/drivers/scsi/fastlane.c b/drivers/scsi/fastlane.c deleted file mode 100644 index 4266a2139b5..00000000000 --- a/drivers/scsi/fastlane.c +++ /dev/null @@ -1,421 +0,0 @@ -/* fastlane.c: Driver for Phase5's Fastlane SCSI Controller. - * - * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk) - * - * This driver is based on the CyberStorm driver, hence the occasional - * reference to CyberStorm. - * - * Betatesting & crucial adjustments by - * Patrik Rak (prak3264@ss1000.ms.mff.cuni.cz) - * - */ - -/* TODO: - * - * o According to the doc from laire, it is required to reset the DMA when - * the transfer is done. ATM we reset DMA just before every new - * dma_init_(read|write). - * - * 1) Figure out how to make a cleaner merge with the sparc driver with regard - * to the caches and the Sparc MMU mapping. - * 2) Make as few routines required outside the generic driver. A lot of the - * routines in this file used to be inline! - */ - -#include <linux/module.h> - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/blkdev.h> -#include <linux/proc_fs.h> -#include <linux/stat.h> -#include <linux/interrupt.h> - -#include "scsi.h" -#include <scsi/scsi_host.h> -#include "NCR53C9x.h" - -#include <linux/zorro.h> -#include <asm/irq.h> - -#include <asm/amigaints.h> -#include <asm/amigahw.h> - -#include <asm/pgtable.h> - -/* Such day has just come... */ -#if 0 -/* Let this defined unless you really need to enable DMA IRQ one day */ -#define NODMAIRQ -#endif - -/* The controller registers can be found in the Z2 config area at these - * offsets: - */ -#define FASTLANE_ESP_ADDR 0x1000001 -#define FASTLANE_DMA_ADDR 0x1000041 - - -/* The Fastlane DMA interface */ -struct fastlane_dma_registers { - volatile unsigned char cond_reg; /* DMA status (ro) [0x0000] */ -#define ctrl_reg cond_reg /* DMA control (wo) [0x0000] */ - unsigned char dmapad1[0x3f]; - volatile unsigned char clear_strobe; /* DMA clear (wo) [0x0040] */ -}; - - -/* DMA status bits */ -#define FASTLANE_DMA_MINT 0x80 -#define FASTLANE_DMA_IACT 0x40 -#define FASTLANE_DMA_CREQ 0x20 - -/* DMA control bits */ -#define FASTLANE_DMA_FCODE 0xa0 -#define FASTLANE_DMA_MASK 0xf3 -#define FASTLANE_DMA_LED 0x10 /* HD led control 1 = on */ -#define FASTLANE_DMA_WRITE 0x08 /* 1 = write */ -#define FASTLANE_DMA_ENABLE 0x04 /* Enable DMA */ -#define FASTLANE_DMA_EDI 0x02 /* Enable DMA IRQ ? */ -#define FASTLANE_DMA_ESI 0x01 /* Enable SCSI IRQ */ - -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count); -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp); -static void dma_dump_state(struct NCR_ESP *esp); -static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length); -static void dma_init_write(struct NCR_ESP *esp, __u32 vaddr, int length); -static void dma_ints_off(struct NCR_ESP *esp); -static void dma_ints_on(struct NCR_ESP *esp); -static int dma_irq_p(struct NCR_ESP *esp); -static void dma_irq_exit(struct NCR_ESP *esp); -static void dma_led_off(struct NCR_ESP *esp); -static void dma_led_on(struct NCR_ESP *esp); -static int dma_ports_p(struct NCR_ESP *esp); -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write); - -static unsigned char ctrl_data = 0; /* Keep backup of the stuff written - * to ctrl_reg. Always write a copy - * to this register when writing to - * the hardware register! - */ - -static volatile unsigned char cmd_buffer[16]; - /* This is where all commands are put - * before they are transferred to the ESP chip - * via PIO. - */ - -static inline void dma_clear(struct NCR_ESP *esp) -{ - struct fastlane_dma_registers *dregs = - (struct fastlane_dma_registers *) (esp->dregs); - unsigned long *t; - - ctrl_data = (ctrl_data & FASTLANE_DMA_MASK); - dregs->ctrl_reg = ctrl_data; - - t = (unsigned long *)(esp->edev); - - dregs->clear_strobe = 0; - *t = 0 ; -} - -/***************************************************************** Detection */ -int __init fastlane_esp_detect(struct scsi_host_template *tpnt) -{ - struct NCR_ESP *esp; - struct zorro_dev *z = NULL; - unsigned long address; - - if ((z = zorro_find_device(ZORRO_PROD_PHASE5_BLIZZARD_1230_II_FASTLANE_Z3_CYBERSCSI_CYBERSTORM060, z))) { - unsigned long board = z->resource.start; - if (request_mem_region(board+FASTLANE_ESP_ADDR, - sizeof(struct ESP_regs), "NCR53C9x")) { - /* Check if this is really a fastlane controller. The problem - * is that also the cyberstorm and blizzard controllers use - * this ID value. Fortunately only Fastlane maps in Z3 space - */ - if (board < 0x1000000) { - goto err_release; - } - esp = esp_allocate(tpnt, (void *)board + FASTLANE_ESP_ADDR, 0); - - /* Do command transfer with programmed I/O */ - esp->do_pio_cmds = 1; - - /* Required functions */ - esp->dma_bytes_sent = &dma_bytes_sent; - esp->dma_can_transfer = &dma_can_transfer; - esp->dma_dump_state = &dma_dump_state; - esp->dma_init_read = &dma_init_read; - esp->dma_init_write = &dma_init_write; - esp->dma_ints_off = &dma_ints_off; - esp->dma_ints_on = &dma_ints_on; - esp->dma_irq_p = &dma_irq_p; - esp->dma_ports_p = &dma_ports_p; - esp->dma_setup = &dma_setup; - - /* Optional functions */ - esp->dma_barrier = 0; - esp->dma_drain = 0; - esp->dma_invalidate = 0; - esp->dma_irq_entry = 0; - esp->dma_irq_exit = &dma_irq_exit; - esp->dma_led_on = &dma_led_on; - esp->dma_led_off = &dma_led_off; - esp->dma_poll = 0; - esp->dma_reset = 0; - - /* Initialize the portBits (enable IRQs) */ - ctrl_data = (FASTLANE_DMA_FCODE | -#ifndef NODMAIRQ - FASTLANE_DMA_EDI | -#endif - FASTLANE_DMA_ESI); - - - /* SCSI chip clock */ - esp->cfreq = 40000000; - - - /* Map the physical address space into virtual kernel space */ - address = (unsigned long) - z_ioremap(board, z->resource.end-board+1); - - if(!address){ - printk("Could not remap Fastlane controller memory!"); - goto err_unregister; - } - - - /* The DMA registers on the Fastlane are mapped - * relative to the device (i.e. in the same Zorro - * I/O block). - */ - esp->dregs = (void *)(address + FASTLANE_DMA_ADDR); - - /* ESP register base */ - esp->eregs = (struct ESP_regs *)(address + FASTLANE_ESP_ADDR); - - /* Board base */ - esp->edev = (void *) address; - - /* Set the command buffer */ - esp->esp_command = cmd_buffer; - esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer); - - esp->irq = IRQ_AMIGA_PORTS; - esp->slot = board+FASTLANE_ESP_ADDR; - if (request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED, - "Fastlane SCSI", esp->ehost)) { - printk(KERN_WARNING "Fastlane: Could not get IRQ%d, aborting.\n", IRQ_AMIGA_PORTS); - goto err_unmap; - } - - /* Controller ID */ - esp->scsi_id = 7; - - /* We don't have a differential SCSI-bus. */ - esp->diff = 0; - - dma_clear(esp); - esp_initialize(esp); - - printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use); - esps_running = esps_in_use; - return esps_in_use; - } - } - return 0; - - err_unmap: - z_iounmap((void *)address); - err_unregister: - scsi_unregister (esp->ehost); - err_release: - release_mem_region(z->resource.start+FASTLANE_ESP_ADDR, - sizeof(struct ESP_regs)); - return 0; -} - - -/************************************************************* DMA Functions */ -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count) -{ - /* Since the Fastlane DMA is fully dedicated to the ESP chip, - * the number of bytes sent (to the ESP chip) equals the number - * of bytes in the FIFO - there is no buffering in the DMA controller. - * XXXX Do I read this right? It is from host to ESP, right? - */ - return fifo_count; -} - -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - unsigned long sz = sp->SCp.this_residual; - if(sz > 0xfffc) - sz = 0xfffc; - return sz; -} - -static void dma_dump_state(struct NCR_ESP *esp) -{ - ESPLOG(("esp%d: dma -- cond_reg<%02x>\n", - esp->esp_id, ((struct fastlane_dma_registers *) - (esp->dregs))->cond_reg)); - ESPLOG(("intreq:<%04x>, intena:<%04x>\n", - amiga_custom.intreqr, amiga_custom.intenar)); -} - -static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length) -{ - struct fastlane_dma_registers *dregs = - (struct fastlane_dma_registers *) (esp->dregs); - unsigned long *t; - - cache_clear(addr, length); - - dma_clear(esp); - - t = (unsigned long *)((addr & 0x00ffffff) + esp->edev); - - dregs->clear_strobe = 0; - *t = addr; - - ctrl_data = (ctrl_data & FASTLANE_DMA_MASK) | FASTLANE_DMA_ENABLE; - dregs->ctrl_reg = ctrl_data; -} - -static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length) -{ - struct fastlane_dma_registers *dregs = - (struct fastlane_dma_registers *) (esp->dregs); - unsigned long *t; - - cache_push(addr, length); - - dma_clear(esp); - - t = (unsigned long *)((addr & 0x00ffffff) + (esp->edev)); - - dregs->clear_strobe = 0; - *t = addr; - - ctrl_data = ((ctrl_data & FASTLANE_DMA_MASK) | - FASTLANE_DMA_ENABLE | - FASTLANE_DMA_WRITE); - dregs->ctrl_reg = ctrl_data; -} - - -static void dma_ints_off(struct NCR_ESP *esp) -{ - disable_irq(esp->irq); -} - -static void dma_ints_on(struct NCR_ESP *esp) -{ - enable_irq(esp->irq); -} - -static void dma_irq_exit(struct NCR_ESP *esp) -{ - struct fastlane_dma_registers *dregs = - (struct fastlane_dma_registers *) (esp->dregs); - - dregs->ctrl_reg = ctrl_data & ~(FASTLANE_DMA_EDI|FASTLANE_DMA_ESI); -#ifdef __mc68000__ - nop(); -#endif - dregs->ctrl_reg = ctrl_data; -} - -static int dma_irq_p(struct NCR_ESP *esp) -{ - struct fastlane_dma_registers *dregs = - (struct fastlane_dma_registers *) (esp->dregs); - unsigned char dma_status; - - dma_status = dregs->cond_reg; - - if(dma_status & FASTLANE_DMA_IACT) - return 0; /* not our IRQ */ - - /* Return non-zero if ESP requested IRQ */ - return ( -#ifndef NODMAIRQ - (dma_status & FASTLANE_DMA_CREQ) && -#endif - (!(dma_status & FASTLANE_DMA_MINT)) && - (esp_read(((struct ESP_regs *) (esp->eregs))->esp_status) & ESP_STAT_INTR)); -} - -static void dma_led_off(struct NCR_ESP *esp) -{ - ctrl_data &= ~FASTLANE_DMA_LED; - ((struct fastlane_dma_registers *)(esp->dregs))->ctrl_reg = ctrl_data; -} - -static void dma_led_on(struct NCR_ESP *esp) -{ - ctrl_data |= FASTLANE_DMA_LED; - ((struct fastlane_dma_registers *)(esp->dregs))->ctrl_reg = ctrl_data; -} - -static int dma_ports_p(struct NCR_ESP *esp) -{ - return ((amiga_custom.intenar) & IF_PORTS); -} - -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write) -{ - /* On the Sparc, DMA_ST_WRITE means "move data from device to memory" - * so when (write) is true, it actually means READ! - */ - if(write){ - dma_init_read(esp, addr, count); - } else { - dma_init_write(esp, addr, count); - } -} - -#define HOSTS_C - -int fastlane_esp_release(struct Scsi_Host *instance) -{ -#ifdef MODULE - unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev; - esp_deallocate((struct NCR_ESP *)instance->hostdata); - esp_release(); - release_mem_region(address, sizeof(struct ESP_regs)); - free_irq(IRQ_AMIGA_PORTS, esp_intr); -#endif - return 1; -} - - -static struct scsi_host_template driver_template = { - .proc_name = "esp-fastlane", - .proc_info = esp_proc_info, - .name = "Fastlane SCSI", - .detect = fastlane_esp_detect, - .slave_alloc = esp_slave_alloc, - .slave_destroy = esp_slave_destroy, - .release = fastlane_esp_release, - .queuecommand = esp_queue, - .eh_abort_handler = esp_abort, - .eh_bus_reset_handler = esp_reset, - .can_queue = 7, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = ENABLE_CLUSTERING -}; - -#include "scsi_module.c" - -MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index b6f99dfbb03..8a178674cb1 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -629,8 +629,9 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) int rc; if (tcp_conn->in.datalen) { - printk(KERN_ERR "iscsi_tcp: invalid R2t with datalen %d\n", - tcp_conn->in.datalen); + iscsi_conn_printk(KERN_ERR, conn, + "invalid R2t with datalen %d\n", + tcp_conn->in.datalen); return ISCSI_ERR_DATALEN; } @@ -644,8 +645,9 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) iscsi_update_cmdsn(session, (struct iscsi_nopin*)rhdr); if (!ctask->sc || session->state != ISCSI_STATE_LOGGED_IN) { - printk(KERN_INFO "iscsi_tcp: dropping R2T itt %d in " - "recovery...\n", ctask->itt); + iscsi_conn_printk(KERN_INFO, conn, + "dropping R2T itt %d in recovery.\n", + ctask->itt); return 0; } @@ -655,7 +657,8 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) r2t->exp_statsn = rhdr->statsn; r2t->data_length = be32_to_cpu(rhdr->data_length); if (r2t->data_length == 0) { - printk(KERN_ERR "iscsi_tcp: invalid R2T with zero data len\n"); + iscsi_conn_printk(KERN_ERR, conn, + "invalid R2T with zero data len\n"); __kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t, sizeof(void*)); return ISCSI_ERR_DATALEN; @@ -668,9 +671,10 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) r2t->data_offset = be32_to_cpu(rhdr->data_offset); if (r2t->data_offset + r2t->data_length > scsi_bufflen(ctask->sc)) { - printk(KERN_ERR "iscsi_tcp: invalid R2T with data len %u at " - "offset %u and total length %d\n", r2t->data_length, - r2t->data_offset, scsi_bufflen(ctask->sc)); + iscsi_conn_printk(KERN_ERR, conn, + "invalid R2T with data len %u at offset %u " + "and total length %d\n", r2t->data_length, + r2t->data_offset, scsi_bufflen(ctask->sc)); __kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t, sizeof(void*)); return ISCSI_ERR_DATALEN; @@ -736,8 +740,9 @@ iscsi_tcp_hdr_dissect(struct iscsi_conn *conn, struct iscsi_hdr *hdr) /* verify PDU length */ tcp_conn->in.datalen = ntoh24(hdr->dlength); if (tcp_conn->in.datalen > conn->max_recv_dlength) { - printk(KERN_ERR "iscsi_tcp: datalen %d > %d\n", - tcp_conn->in.datalen, conn->max_recv_dlength); + iscsi_conn_printk(KERN_ERR, conn, + "iscsi_tcp: datalen %d > %d\n", + tcp_conn->in.datalen, conn->max_recv_dlength); return ISCSI_ERR_DATALEN; } @@ -819,10 +824,12 @@ iscsi_tcp_hdr_dissect(struct iscsi_conn *conn, struct iscsi_hdr *hdr) * For now we fail until we find a vendor that needs it */ if (ISCSI_DEF_MAX_RECV_SEG_LEN < tcp_conn->in.datalen) { - printk(KERN_ERR "iscsi_tcp: received buffer of len %u " - "but conn buffer is only %u (opcode %0x)\n", - tcp_conn->in.datalen, - ISCSI_DEF_MAX_RECV_SEG_LEN, opcode); + iscsi_conn_printk(KERN_ERR, conn, + "iscsi_tcp: received buffer of " + "len %u but conn buffer is only %u " + "(opcode %0x)\n", + tcp_conn->in.datalen, + ISCSI_DEF_MAX_RECV_SEG_LEN, opcode); rc = ISCSI_ERR_PROTO; break; } @@ -1496,30 +1503,25 @@ iscsi_tcp_conn_create(struct iscsi_cls_session *cls_session, uint32_t conn_idx) tcp_conn->tx_hash.tfm = crypto_alloc_hash("crc32c", 0, CRYPTO_ALG_ASYNC); tcp_conn->tx_hash.flags = 0; - if (IS_ERR(tcp_conn->tx_hash.tfm)) { - printk(KERN_ERR "Could not create connection due to crc32c " - "loading error %ld. Make sure the crc32c module is " - "built as a module or into the kernel\n", - PTR_ERR(tcp_conn->tx_hash.tfm)); + if (IS_ERR(tcp_conn->tx_hash.tfm)) goto free_tcp_conn; - } tcp_conn->rx_hash.tfm = crypto_alloc_hash("crc32c", 0, CRYPTO_ALG_ASYNC); tcp_conn->rx_hash.flags = 0; - if (IS_ERR(tcp_conn->rx_hash.tfm)) { - printk(KERN_ERR "Could not create connection due to crc32c " - "loading error %ld. Make sure the crc32c module is " - "built as a module or into the kernel\n", - PTR_ERR(tcp_conn->rx_hash.tfm)); + if (IS_ERR(tcp_conn->rx_hash.tfm)) goto free_tx_tfm; - } return cls_conn; free_tx_tfm: crypto_free_hash(tcp_conn->tx_hash.tfm); free_tcp_conn: + iscsi_conn_printk(KERN_ERR, conn, + "Could not create connection due to crc32c " + "loading error. Make sure the crc32c " + "module is built as a module or into the " + "kernel\n"); kfree(tcp_conn); tcp_conn_alloc_fail: iscsi_conn_teardown(cls_conn); @@ -1627,7 +1629,8 @@ iscsi_tcp_conn_bind(struct iscsi_cls_session *cls_session, /* lookup for existing socket */ sock = sockfd_lookup((int)transport_eph, &err); if (!sock) { - printk(KERN_ERR "iscsi_tcp: sockfd_lookup failed %d\n", err); + iscsi_conn_printk(KERN_ERR, conn, + "sockfd_lookup failed %d\n", err); return -EEXIST; } /* diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 553168ae44f..59f8445eab0 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -160,7 +160,7 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_cmd_task *ctask) hdr->opcode = ISCSI_OP_SCSI_CMD; hdr->flags = ISCSI_ATTR_SIMPLE; int_to_scsilun(sc->device->lun, (struct scsi_lun *)hdr->lun); - hdr->itt = build_itt(ctask->itt, conn->id, session->age); + hdr->itt = build_itt(ctask->itt, session->age); hdr->data_length = cpu_to_be32(scsi_bufflen(sc)); hdr->cmdsn = cpu_to_be32(session->cmdsn); session->cmdsn++; @@ -416,8 +416,9 @@ static void iscsi_scsi_cmd_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr, if (datalen < 2) { invalid_datalen: - printk(KERN_ERR "iscsi: Got CHECK_CONDITION but " - "invalid data buffer size of %d\n", datalen); + iscsi_conn_printk(KERN_ERR, conn, + "Got CHECK_CONDITION but invalid data " + "buffer size of %d\n", datalen); sc->result = DID_BAD_TARGET << 16; goto out; } @@ -494,7 +495,7 @@ static void iscsi_send_nopout(struct iscsi_conn *conn, struct iscsi_nopin *rhdr) mtask = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)&hdr, NULL, 0); if (!mtask) { - printk(KERN_ERR "Could not send nopout\n"); + iscsi_conn_printk(KERN_ERR, conn, "Could not send nopout\n"); return; } @@ -522,9 +523,10 @@ static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr, if (ntoh24(reject->dlength) >= sizeof(struct iscsi_hdr)) { memcpy(&rejected_pdu, data, sizeof(struct iscsi_hdr)); itt = get_itt(rejected_pdu.itt); - printk(KERN_ERR "itt 0x%x had pdu (op 0x%x) rejected " - "due to DataDigest error.\n", itt, - rejected_pdu.opcode); + iscsi_conn_printk(KERN_ERR, conn, + "itt 0x%x had pdu (op 0x%x) rejected " + "due to DataDigest error.\n", itt, + rejected_pdu.opcode); } } return 0; @@ -541,8 +543,8 @@ static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr, * queuecommand or send generic. session lock must be held and verify * itt must have been called. */ -int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, - char *data, int datalen) +static int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, + char *data, int datalen) { struct iscsi_session *session = conn->session; int opcode = hdr->opcode & ISCSI_OPCODE_MASK, rc = 0; @@ -672,7 +674,6 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, return rc; } -EXPORT_SYMBOL_GPL(__iscsi_complete_pdu); int iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, char *data, int datalen) @@ -697,18 +698,13 @@ int iscsi_verify_itt(struct iscsi_conn *conn, struct iscsi_hdr *hdr, if (hdr->itt != RESERVED_ITT) { if (((__force u32)hdr->itt & ISCSI_AGE_MASK) != (session->age << ISCSI_AGE_SHIFT)) { - printk(KERN_ERR "iscsi: received itt %x expected " - "session age (%x)\n", (__force u32)hdr->itt, - session->age & ISCSI_AGE_MASK); + iscsi_conn_printk(KERN_ERR, conn, + "received itt %x expected session " + "age (%x)\n", (__force u32)hdr->itt, + session->age & ISCSI_AGE_MASK); return ISCSI_ERR_BAD_ITT; } - if (((__force u32)hdr->itt & ISCSI_CID_MASK) != - (conn->id << ISCSI_CID_SHIFT)) { - printk(KERN_ERR "iscsi: received itt %x, expected " - "CID (%x)\n", (__force u32)hdr->itt, conn->id); - return ISCSI_ERR_BAD_ITT; - } itt = get_itt(hdr->itt); } else itt = ~0U; @@ -717,16 +713,17 @@ int iscsi_verify_itt(struct iscsi_conn *conn, struct iscsi_hdr *hdr, ctask = session->cmds[itt]; if (!ctask->sc) { - printk(KERN_INFO "iscsi: dropping ctask with " - "itt 0x%x\n", ctask->itt); + iscsi_conn_printk(KERN_INFO, conn, "dropping ctask " + "with itt 0x%x\n", ctask->itt); /* force drop */ return ISCSI_ERR_NO_SCSI_CMD; } if (ctask->sc->SCp.phase != session->age) { - printk(KERN_ERR "iscsi: ctask's session age %d, " - "expected %d\n", ctask->sc->SCp.phase, - session->age); + iscsi_conn_printk(KERN_ERR, conn, + "iscsi: ctask's session age %d, " + "expected %d\n", ctask->sc->SCp.phase, + session->age); return ISCSI_ERR_SESSION_FAILED; } } @@ -771,7 +768,7 @@ static void iscsi_prep_mtask(struct iscsi_conn *conn, */ nop->cmdsn = cpu_to_be32(session->cmdsn); if (hdr->itt != RESERVED_ITT) { - hdr->itt = build_itt(mtask->itt, conn->id, session->age); + hdr->itt = build_itt(mtask->itt, session->age); /* * TODO: We always use immediate, so we never hit this. * If we start to send tmfs or nops as non-immediate then @@ -997,6 +994,7 @@ enum { FAILURE_SESSION_IN_RECOVERY, FAILURE_SESSION_RECOVERY_TIMEOUT, FAILURE_SESSION_LOGGING_OUT, + FAILURE_SESSION_NOT_READY, }; int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) @@ -1017,6 +1015,12 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) session = iscsi_hostdata(host->hostdata); spin_lock(&session->lock); + reason = iscsi_session_chkready(session_to_cls(session)); + if (reason) { + sc->result = reason; + goto fault; + } + /* * ISCSI_STATE_FAILED is a temp. state. The recovery * code will decide what is best to do with command queued @@ -1033,18 +1037,23 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) switch (session->state) { case ISCSI_STATE_IN_RECOVERY: reason = FAILURE_SESSION_IN_RECOVERY; - goto reject; + sc->result = DID_IMM_RETRY << 16; + break; case ISCSI_STATE_LOGGING_OUT: reason = FAILURE_SESSION_LOGGING_OUT; - goto reject; + sc->result = DID_IMM_RETRY << 16; + break; case ISCSI_STATE_RECOVERY_FAILED: reason = FAILURE_SESSION_RECOVERY_TIMEOUT; + sc->result = DID_NO_CONNECT << 16; break; case ISCSI_STATE_TERMINATE: reason = FAILURE_SESSION_TERMINATE; + sc->result = DID_NO_CONNECT << 16; break; default: reason = FAILURE_SESSION_FREED; + sc->result = DID_NO_CONNECT << 16; } goto fault; } @@ -1052,6 +1061,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) conn = session->leadconn; if (!conn) { reason = FAILURE_SESSION_FREED; + sc->result = DID_NO_CONNECT << 16; goto fault; } @@ -1091,9 +1101,7 @@ reject: fault: spin_unlock(&session->lock); - printk(KERN_ERR "iscsi: cmd 0x%x is not queued (%d)\n", - sc->cmnd[0], reason); - sc->result = (DID_NO_CONNECT << 16); + debug_scsi("iscsi: cmd 0x%x is not queued (%d)\n", sc->cmnd[0], reason); scsi_set_resid(sc, scsi_bufflen(sc)); sc->scsi_done(sc); spin_lock(host->host_lock); @@ -1160,7 +1168,8 @@ failed: mutex_lock(&session->eh_mutex); spin_lock_bh(&session->lock); if (session->state == ISCSI_STATE_LOGGED_IN) - printk(KERN_INFO "iscsi: host reset succeeded\n"); + iscsi_session_printk(KERN_INFO, session, + "host reset succeeded\n"); else goto failed; spin_unlock_bh(&session->lock); @@ -1239,7 +1248,8 @@ static int iscsi_exec_task_mgmt_fn(struct iscsi_conn *conn, * Fail commands. session lock held and recv side suspended and xmit * thread flushed */ -static void fail_all_commands(struct iscsi_conn *conn, unsigned lun) +static void fail_all_commands(struct iscsi_conn *conn, unsigned lun, + int error) { struct iscsi_cmd_task *ctask, *tmp; @@ -1251,7 +1261,7 @@ static void fail_all_commands(struct iscsi_conn *conn, unsigned lun) if (lun == ctask->sc->device->lun || lun == -1) { debug_scsi("failing pending sc %p itt 0x%x\n", ctask->sc, ctask->itt); - fail_command(conn, ctask, DID_BUS_BUSY << 16); + fail_command(conn, ctask, error << 16); } } @@ -1259,7 +1269,7 @@ static void fail_all_commands(struct iscsi_conn *conn, unsigned lun) if (lun == ctask->sc->device->lun || lun == -1) { debug_scsi("failing requeued sc %p itt 0x%x\n", ctask->sc, ctask->itt); - fail_command(conn, ctask, DID_BUS_BUSY << 16); + fail_command(conn, ctask, error << 16); } } @@ -1357,10 +1367,10 @@ static void iscsi_check_transport_timeouts(unsigned long data) last_recv = conn->last_recv; if (time_before_eq(last_recv + timeout + (conn->ping_timeout * HZ), jiffies)) { - printk(KERN_ERR "ping timeout of %d secs expired, " - "last rx %lu, last ping %lu, now %lu\n", - conn->ping_timeout, last_recv, - conn->last_ping, jiffies); + iscsi_conn_printk(KERN_ERR, conn, "ping timeout of %d secs " + "expired, last rx %lu, last ping %lu, " + "now %lu\n", conn->ping_timeout, last_recv, + conn->last_ping, jiffies); spin_unlock(&session->lock); iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); return; @@ -1373,14 +1383,11 @@ static void iscsi_check_transport_timeouts(unsigned long data) iscsi_send_nopout(conn, NULL); } next_timeout = last_recv + timeout + (conn->ping_timeout * HZ); - } else { + } else next_timeout = last_recv + timeout; - } - if (next_timeout) { - debug_scsi("Setting next tmo %lu\n", next_timeout); - mod_timer(&conn->transport_timer, next_timeout); - } + debug_scsi("Setting next tmo %lu\n", next_timeout); + mod_timer(&conn->transport_timer, next_timeout); done: spin_unlock(&session->lock); } @@ -1573,7 +1580,7 @@ int iscsi_eh_device_reset(struct scsi_cmnd *sc) /* need to grab the recv lock then session lock */ write_lock_bh(conn->recv_lock); spin_lock(&session->lock); - fail_all_commands(conn, sc->device->lun); + fail_all_commands(conn, sc->device->lun, DID_ERROR); conn->tmf_state = TMF_INITIAL; spin_unlock(&session->lock); write_unlock_bh(conn->recv_lock); @@ -1944,9 +1951,10 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) } spin_unlock_irqrestore(session->host->host_lock, flags); msleep_interruptible(500); - printk(KERN_INFO "iscsi: scsi conn_destroy(): host_busy %d " - "host_failed %d\n", session->host->host_busy, - session->host->host_failed); + iscsi_conn_printk(KERN_INFO, conn, "iscsi conn_destroy(): " + "host_busy %d host_failed %d\n", + session->host->host_busy, + session->host->host_failed); /* * force eh_abort() to unblock */ @@ -1975,27 +1983,28 @@ int iscsi_conn_start(struct iscsi_cls_conn *cls_conn) struct iscsi_session *session = conn->session; if (!session) { - printk(KERN_ERR "iscsi: can't start unbound connection\n"); + iscsi_conn_printk(KERN_ERR, conn, + "can't start unbound connection\n"); return -EPERM; } if ((session->imm_data_en || !session->initial_r2t_en) && session->first_burst > session->max_burst) { - printk("iscsi: invalid burst lengths: " - "first_burst %d max_burst %d\n", - session->first_burst, session->max_burst); + iscsi_conn_printk(KERN_INFO, conn, "invalid burst lengths: " + "first_burst %d max_burst %d\n", + session->first_burst, session->max_burst); return -EINVAL; } if (conn->ping_timeout && !conn->recv_timeout) { - printk(KERN_ERR "iscsi: invalid recv timeout of zero " - "Using 5 seconds\n."); + iscsi_conn_printk(KERN_ERR, conn, "invalid recv timeout of " + "zero. Using 5 seconds\n."); conn->recv_timeout = 5; } if (conn->recv_timeout && !conn->ping_timeout) { - printk(KERN_ERR "iscsi: invalid ping timeout of zero " - "Using 5 seconds.\n"); + iscsi_conn_printk(KERN_ERR, conn, "invalid ping timeout of " + "zero. Using 5 seconds.\n"); conn->ping_timeout = 5; } @@ -2019,11 +2028,9 @@ int iscsi_conn_start(struct iscsi_cls_conn *cls_conn) conn->stop_stage = 0; conn->tmf_state = TMF_INITIAL; session->age++; - spin_unlock_bh(&session->lock); - - iscsi_unblock_session(session_to_cls(session)); - wake_up(&conn->ehwait); - return 0; + if (session->age == 16) + session->age = 0; + break; case STOP_CONN_TERM: conn->stop_stage = 0; break; @@ -2032,6 +2039,8 @@ int iscsi_conn_start(struct iscsi_cls_conn *cls_conn) } spin_unlock_bh(&session->lock); + iscsi_unblock_session(session_to_cls(session)); + wake_up(&conn->ehwait); return 0; } EXPORT_SYMBOL_GPL(iscsi_conn_start); @@ -2123,7 +2132,8 @@ static void iscsi_start_session_recovery(struct iscsi_session *session, * flush queues. */ spin_lock_bh(&session->lock); - fail_all_commands(conn, -1); + fail_all_commands(conn, -1, + STOP_CONN_RECOVER ? DID_BUS_BUSY : DID_ERROR); flush_control_queues(session, conn); spin_unlock_bh(&session->lock); mutex_unlock(&session->eh_mutex); @@ -2140,7 +2150,8 @@ void iscsi_conn_stop(struct iscsi_cls_conn *cls_conn, int flag) iscsi_start_session_recovery(session, conn, flag); break; default: - printk(KERN_ERR "iscsi: invalid stop flag %d\n", flag); + iscsi_conn_printk(KERN_ERR, conn, + "invalid stop flag %d\n", flag); } } EXPORT_SYMBOL_GPL(iscsi_conn_stop); diff --git a/drivers/scsi/mac_esp.c b/drivers/scsi/mac_esp.c deleted file mode 100644 index bcb49021b7e..00000000000 --- a/drivers/scsi/mac_esp.c +++ /dev/null @@ -1,751 +0,0 @@ -/* - * 68k mac 53c9[46] scsi driver - * - * copyright (c) 1998, David Weis weisd3458@uni.edu - * - * debugging on Quadra 800 and 660AV Michael Schmitz, Dave Kilzer 7/98 - * - * based loosely on cyber_esp.c - */ - -/* these are unused for now */ -#define myreadl(addr) (*(volatile unsigned int *) (addr)) -#define mywritel(b, addr) ((*(volatile unsigned int *) (addr)) = (b)) - - -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/types.h> -#include <linux/ctype.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/blkdev.h> -#include <linux/proc_fs.h> -#include <linux/stat.h> -#include <linux/init.h> -#include <linux/interrupt.h> - -#include "scsi.h" -#include <scsi/scsi_host.h> -#include "NCR53C9x.h" - -#include <asm/io.h> - -#include <asm/setup.h> -#include <asm/irq.h> -#include <asm/macints.h> -#include <asm/machw.h> -#include <asm/mac_via.h> - -#include <asm/pgtable.h> - -#include <asm/macintosh.h> - -/* #define DEBUG_MAC_ESP */ - -extern void esp_handle(struct NCR_ESP *esp); -extern void mac_esp_intr(int irq, void *dev_id); - -static int dma_bytes_sent(struct NCR_ESP * esp, int fifo_count); -static int dma_can_transfer(struct NCR_ESP * esp, Scsi_Cmnd *sp); -static void dma_dump_state(struct NCR_ESP * esp); -static void dma_init_read(struct NCR_ESP * esp, char * vaddress, int length); -static void dma_init_write(struct NCR_ESP * esp, char * vaddress, int length); -static void dma_ints_off(struct NCR_ESP * esp); -static void dma_ints_on(struct NCR_ESP * esp); -static int dma_irq_p(struct NCR_ESP * esp); -static int dma_irq_p_quick(struct NCR_ESP * esp); -static void dma_led_off(struct NCR_ESP * esp); -static void dma_led_on(struct NCR_ESP *esp); -static int dma_ports_p(struct NCR_ESP *esp); -static void dma_setup(struct NCR_ESP * esp, __u32 addr, int count, int write); -static void dma_setup_quick(struct NCR_ESP * esp, __u32 addr, int count, int write); - -static int esp_dafb_dma_irq_p(struct NCR_ESP * espdev); -static int esp_iosb_dma_irq_p(struct NCR_ESP * espdev); - -static volatile unsigned char cmd_buffer[16]; - /* This is where all commands are put - * before they are transferred to the ESP chip - * via PIO. - */ - -static int esp_initialized = 0; - -static int setup_num_esps = -1; -static int setup_disconnect = -1; -static int setup_nosync = -1; -static int setup_can_queue = -1; -static int setup_cmd_per_lun = -1; -static int setup_sg_tablesize = -1; -#ifdef SUPPORT_TAGS -static int setup_use_tagged_queuing = -1; -#endif -static int setup_hostid = -1; - -/* - * Experimental ESP inthandler; check macints.c to make sure dev_id is - * set up properly! - */ - -void mac_esp_intr(int irq, void *dev_id) -{ - struct NCR_ESP *esp = (struct NCR_ESP *) dev_id; - int irq_p = 0; - - /* Handle the one ESP interrupt showing at this IRQ level. */ - if(((esp)->irq & 0xff) == irq) { - /* - * Debug .. - */ - irq_p = esp->dma_irq_p(esp); - printk("mac_esp: irq_p %x current %p disconnected %p\n", - irq_p, esp->current_SC, esp->disconnected_SC); - - /* - * Mac: if we're here, it's an ESP interrupt for sure! - */ - if((esp->current_SC || esp->disconnected_SC)) { - esp->dma_ints_off(esp); - - ESPIRQ(("I%d(", esp->esp_id)); - esp_handle(esp); - ESPIRQ((")")); - - esp->dma_ints_on(esp); - } - } -} - -/* - * Debug hooks; use for playing with the interrupt flag testing and interrupt - * acknowledge on the various machines - */ - -void scsi_esp_polled(int irq, void *dev_id) -{ - if (esp_initialized == 0) - return; - - mac_esp_intr(irq, dev_id); -} - -void fake_intr(int irq, void *dev_id) -{ -#ifdef DEBUG_MAC_ESP - printk("mac_esp: got irq\n"); -#endif - - mac_esp_intr(irq, dev_id); -} - -irqreturn_t fake_drq(int irq, void *dev_id) -{ - printk("mac_esp: got drq\n"); - return IRQ_HANDLED; -} - -#define DRIVER_SETUP - -/* - * Function : mac_esp_setup(char *str) - * - * Purpose : booter command line initialization of the overrides array, - * - * Inputs : str - parameters, separated by commas. - * - * Currently unused in the new driver; need to add settable parameters to the - * detect function. - * - */ - -static int __init mac_esp_setup(char *str) { -#ifdef DRIVER_SETUP - /* Format of mac53c9x parameter is: - * mac53c9x=<num_esps>,<disconnect>,<nosync>,<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags> - * Negative values mean don't change. - */ - - char *this_opt; - long opt; - - this_opt = strsep (&str, ","); - if(this_opt) { - opt = simple_strtol( this_opt, NULL, 0 ); - - if (opt >= 0 && opt <= 2) - setup_num_esps = opt; - else if (opt > 2) - printk( "mac_esp_setup: invalid number of hosts %ld !\n", opt ); - - this_opt = strsep (&str, ","); - } - if(this_opt) { - opt = simple_strtol( this_opt, NULL, 0 ); - - if (opt > 0) - setup_disconnect = opt; - - this_opt = strsep (&str, ","); - } - if(this_opt) { - opt = simple_strtol( this_opt, NULL, 0 ); - - if (opt >= 0) - setup_nosync = opt; - - this_opt = strsep (&str, ","); - } - if(this_opt) { - opt = simple_strtol( this_opt, NULL, 0 ); - - if (opt > 0) - setup_can_queue = opt; - - this_opt = strsep (&str, ","); - } - if(this_opt) { - opt = simple_strtol( this_opt, NULL, 0 ); - - if (opt > 0) - setup_cmd_per_lun = opt; - - this_opt = strsep (&str, ","); - } - if(this_opt) { - opt = simple_strtol( this_opt, NULL, 0 ); - - if (opt >= 0) { - setup_sg_tablesize = opt; - /* Must be <= SG_ALL (255) */ - if (setup_sg_tablesize > SG_ALL) - setup_sg_tablesize = SG_ALL; - } - - this_opt = strsep (&str, ","); - } - if(this_opt) { - opt = simple_strtol( this_opt, NULL, 0 ); - - /* Must be between 0 and 7 */ - if (opt >= 0 && opt <= 7) - setup_hostid = opt; - else if (opt > 7) - printk( "mac_esp_setup: invalid host ID %ld !\n", opt); - - this_opt = strsep (&str, ","); - } -#ifdef SUPPORT_TAGS - if(this_opt) { - opt = simple_strtol( this_opt, NULL, 0 ); - if (opt >= 0) - setup_use_tagged_queuing = !!opt; - } -#endif -#endif - return 1; -} - -__setup("mac53c9x=", mac_esp_setup); - - -/* - * ESP address 'detection' - */ - -unsigned long get_base(int chip_num) -{ - /* - * using the chip_num and mac model, figure out where the - * chips are mapped - */ - - unsigned long io_base = 0x50f00000; - unsigned int second_offset = 0x402; - unsigned long scsi_loc = 0; - - switch (macintosh_config->scsi_type) { - - /* 950, 900, 700 */ - case MAC_SCSI_QUADRA2: - scsi_loc = io_base + 0xf000 + ((chip_num == 0) ? 0 : second_offset); - break; - - /* av's */ - case MAC_SCSI_QUADRA3: - scsi_loc = io_base + 0x18000 + ((chip_num == 0) ? 0 : second_offset); - break; - - /* most quadra/centris models are like this */ - case MAC_SCSI_QUADRA: - scsi_loc = io_base + 0x10000; - break; - - default: - printk("mac_esp: get_base: hit default!\n"); - scsi_loc = io_base + 0x10000; - break; - - } /* switch */ - - printk("mac_esp: io base at 0x%lx\n", scsi_loc); - - return scsi_loc; -} - -/* - * Model dependent ESP setup - */ - -int mac_esp_detect(struct scsi_host_template * tpnt) -{ - int quick = 0; - int chipnum, chipspresent = 0; -#if 0 - unsigned long timeout; -#endif - - if (esp_initialized > 0) - return -ENODEV; - - /* what do we have in this machine... */ - if (MACHW_PRESENT(MAC_SCSI_96)) { - chipspresent ++; - } - - if (MACHW_PRESENT(MAC_SCSI_96_2)) { - chipspresent ++; - } - - /* number of ESPs present ? */ - if (setup_num_esps >= 0) { - if (chipspresent >= setup_num_esps) - chipspresent = setup_num_esps; - else - printk("mac_esp_detect: num_hosts detected %d setup %d \n", - chipspresent, setup_num_esps); - } - - /* TODO: add disconnect / nosync flags */ - - /* setup variables */ - tpnt->can_queue = - (setup_can_queue > 0) ? setup_can_queue : 7; - tpnt->cmd_per_lun = - (setup_cmd_per_lun > 0) ? setup_cmd_per_lun : 1; - tpnt->sg_tablesize = - (setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_ALL; - - if (setup_hostid >= 0) - tpnt->this_id = setup_hostid; - else { - /* use 7 as default */ - tpnt->this_id = 7; - } - -#ifdef SUPPORT_TAGS - if (setup_use_tagged_queuing < 0) - setup_use_tagged_queuing = DEFAULT_USE_TAGGED_QUEUING; -#endif - - for (chipnum = 0; chipnum < chipspresent; chipnum ++) { - struct NCR_ESP * esp; - - esp = esp_allocate(tpnt, NULL, 0); - esp->eregs = (struct ESP_regs *) get_base(chipnum); - - esp->dma_irq_p = &esp_dafb_dma_irq_p; - if (chipnum == 0) { - - if (macintosh_config->scsi_type == MAC_SCSI_QUADRA) { - /* most machines except those below :-) */ - quick = 1; - esp->dma_irq_p = &esp_iosb_dma_irq_p; - } else if (macintosh_config->scsi_type == MAC_SCSI_QUADRA3) { - /* mostly av's */ - quick = 0; - } else { - /* q950, 900, 700 */ - quick = 1; - out_be32(0xf9800024, 0x1d1); - esp->dregs = (void *) 0xf9800024; - } - - } else { /* chipnum */ - - quick = 1; - out_be32(0xf9800028, 0x1d1); - esp->dregs = (void *) 0xf9800028; - - } /* chipnum == 0 */ - - /* use pio for command bytes; pio for message/data: TBI */ - esp->do_pio_cmds = 1; - - /* Set the command buffer */ - esp->esp_command = (volatile unsigned char*) cmd_buffer; - esp->esp_command_dvma = (__u32) cmd_buffer; - - /* various functions */ - esp->dma_bytes_sent = &dma_bytes_sent; - esp->dma_can_transfer = &dma_can_transfer; - esp->dma_dump_state = &dma_dump_state; - esp->dma_init_read = NULL; - esp->dma_init_write = NULL; - esp->dma_ints_off = &dma_ints_off; - esp->dma_ints_on = &dma_ints_on; - - esp->dma_ports_p = &dma_ports_p; - - - /* Optional functions */ - esp->dma_barrier = NULL; - esp->dma_drain = NULL; - esp->dma_invalidate = NULL; - esp->dma_irq_entry = NULL; - esp->dma_irq_exit = NULL; - esp->dma_led_on = NULL; - esp->dma_led_off = NULL; - esp->dma_poll = NULL; - esp->dma_reset = NULL; - - /* SCSI chip speed */ - /* below esp->cfreq = 40000000; */ - - - if (quick) { - /* 'quick' means there's handshake glue logic like in the 5380 case */ - esp->dma_setup = &dma_setup_quick; - } else { - esp->dma_setup = &dma_setup; - } - - if (chipnum == 0) { - - esp->irq = IRQ_MAC_SCSI; - - request_irq(IRQ_MAC_SCSI, esp_intr, 0, "Mac ESP SCSI", esp->ehost); -#if 0 /* conflicts with IOP ADB */ - request_irq(IRQ_MAC_SCSIDRQ, fake_drq, 0, "Mac ESP DRQ", esp->ehost); -#endif - - if (macintosh_config->scsi_type == MAC_SCSI_QUADRA) { - esp->cfreq = 16500000; - } else { - esp->cfreq = 25000000; - } - - - } else { /* chipnum == 1 */ - - esp->irq = IRQ_MAC_SCSIDRQ; -#if 0 /* conflicts with IOP ADB */ - request_irq(IRQ_MAC_SCSIDRQ, esp_intr, 0, "Mac ESP SCSI 2", esp->ehost); -#endif - - esp->cfreq = 25000000; - - } - - if (quick) { - printk("esp: using quick version\n"); - } - - printk("esp: addr at 0x%p\n", esp->eregs); - - esp->scsi_id = 7; - esp->diff = 0; - - esp_initialize(esp); - - } /* for chipnum */ - - if (chipspresent) - printk("\nmac_esp: %d esp controllers found\n", chipspresent); - - esp_initialized = chipspresent; - - return chipspresent; -} - -static int mac_esp_release(struct Scsi_Host *shost) -{ - if (shost->irq) - free_irq(shost->irq, NULL); - if (shost->io_port && shost->n_io_port) - release_region(shost->io_port, shost->n_io_port); - scsi_unregister(shost); - return 0; -} - -/* - * I've been wondering what this is supposed to do, for some time. Talking - * to Allen Briggs: These machines have an extra register someplace where the - * DRQ pin of the ESP can be monitored. That isn't useful for determining - * anything else (such as reselect interrupt or other magic) though. - * Maybe make the semantics should be changed like - * if (esp->current_SC) - * ... check DRQ flag ... - * else - * ... disconnected, check pending VIA interrupt ... - * - * There's a problem with using the dabf flag or mac_irq_pending() here: both - * seem to return 1 even though no interrupt is currently pending, resulting - * in esp_exec_cmd() holding off the next command, and possibly infinite loops - * in esp_intr(). - * Short term fix: just use esp_status & ESP_STAT_INTR here, as long as we - * use simple PIO. The DRQ status will be important when implementing pseudo - * DMA mode (set up ESP transfer count, return, do a batch of bytes in PIO or - * 'hardware handshake' mode upon DRQ). - * If you plan on changing this (i.e. to save the esp_status register access in - * favor of a VIA register access or a shadow register for the IFR), make sure - * to try a debug version of this first to monitor what registers would be a good - * indicator of the ESP interrupt. - */ - -static int esp_dafb_dma_irq_p(struct NCR_ESP * esp) -{ - unsigned int ret; - int sreg = esp_read(esp->eregs->esp_status); - -#ifdef DEBUG_MAC_ESP - printk("mac_esp: esp_dafb_dma_irq_p dafb %d irq %d\n", - readl(esp->dregs), mac_irq_pending(IRQ_MAC_SCSI)); -#endif - - sreg &= ESP_STAT_INTR; - - /* - * maybe working; this is essentially what's used for iosb_dma_irq_p - */ - if (sreg) - return 1; - else - return 0; - - /* - * didn't work ... - */ -#if 0 - if (esp->current_SC) - ret = readl(esp->dregs) & 0x200; - else if (esp->disconnected_SC) - ret = 1; /* sreg ?? */ - else - ret = mac_irq_pending(IRQ_MAC_SCSI); - - return(ret); -#endif - -} - -/* - * See above: testing mac_irq_pending always returned 8 (SCSI IRQ) regardless - * of the actual ESP status. - */ - -static int esp_iosb_dma_irq_p(struct NCR_ESP * esp) -{ - int ret = mac_irq_pending(IRQ_MAC_SCSI) || mac_irq_pending(IRQ_MAC_SCSIDRQ); - int sreg = esp_read(esp->eregs->esp_status); - -#ifdef DEBUG_MAC_ESP - printk("mac_esp: dma_irq_p drq %d irq %d sreg %x curr %p disc %p\n", - mac_irq_pending(IRQ_MAC_SCSIDRQ), mac_irq_pending(IRQ_MAC_SCSI), - sreg, esp->current_SC, esp->disconnected_SC); -#endif - - sreg &= ESP_STAT_INTR; - - if (sreg) - return (sreg); - else - return 0; -} - -/* - * This seems to be OK for PIO at least ... usually 0 after PIO. - */ - -static int dma_bytes_sent(struct NCR_ESP * esp, int fifo_count) -{ - -#ifdef DEBUG_MAC_ESP - printk("mac_esp: dma bytes sent = %x\n", fifo_count); -#endif - - return fifo_count; -} - -/* - * dma_can_transfer is used to switch between DMA and PIO, if DMA (pseudo) - * is ever implemented. Returning 0 here will use PIO. - */ - -static int dma_can_transfer(struct NCR_ESP * esp, Scsi_Cmnd * sp) -{ - unsigned long sz = sp->SCp.this_residual; -#if 0 /* no DMA yet; make conditional */ - if (sz > 0x10000000) { - sz = 0x10000000; - } - printk("mac_esp: dma can transfer = 0lx%x\n", sz); -#else - -#ifdef DEBUG_MAC_ESP - printk("mac_esp: pio to transfer = %ld\n", sz); -#endif - - sz = 0; -#endif - return sz; -} - -/* - * Not yet ... - */ - -static void dma_dump_state(struct NCR_ESP * esp) -{ -#ifdef DEBUG_MAC_ESP - printk("mac_esp: dma_dump_state: called\n"); -#endif -#if 0 - ESPLOG(("esp%d: dma -- cond_reg<%02x>\n", - esp->esp_id, ((struct mac_dma_registers *) - (esp->dregs))->cond_reg)); -#endif -} - -/* - * DMA setup: should be used to set up the ESP transfer count for pseudo - * DMA transfers; need a DRQ transfer function to do the actual transfer - */ - -static void dma_init_read(struct NCR_ESP * esp, char * vaddress, int length) -{ - printk("mac_esp: dma_init_read\n"); -} - - -static void dma_init_write(struct NCR_ESP * esp, char * vaddress, int length) -{ - printk("mac_esp: dma_init_write\n"); -} - - -static void dma_ints_off(struct NCR_ESP * esp) -{ - disable_irq(esp->irq); -} - - -static void dma_ints_on(struct NCR_ESP * esp) -{ - enable_irq(esp->irq); -} - -/* - * generic dma_irq_p(), unused - */ - -static int dma_irq_p(struct NCR_ESP * esp) -{ - int i = esp_read(esp->eregs->esp_status); - -#ifdef DEBUG_MAC_ESP - printk("mac_esp: dma_irq_p status %d\n", i); -#endif - - return (i & ESP_STAT_INTR); -} - -static int dma_irq_p_quick(struct NCR_ESP * esp) -{ - /* - * Copied from iosb_dma_irq_p() - */ - int ret = mac_irq_pending(IRQ_MAC_SCSI) || mac_irq_pending(IRQ_MAC_SCSIDRQ); - int sreg = esp_read(esp->eregs->esp_status); - -#ifdef DEBUG_MAC_ESP - printk("mac_esp: dma_irq_p drq %d irq %d sreg %x curr %p disc %p\n", - mac_irq_pending(IRQ_MAC_SCSIDRQ), mac_irq_pending(IRQ_MAC_SCSI), - sreg, esp->current_SC, esp->disconnected_SC); -#endif - - sreg &= ESP_STAT_INTR; - - if (sreg) - return (sreg); - else - return 0; - -} - -static void dma_led_off(struct NCR_ESP * esp) -{ -#ifdef DEBUG_MAC_ESP - printk("mac_esp: dma_led_off: called\n"); -#endif -} - - -static void dma_led_on(struct NCR_ESP * esp) -{ -#ifdef DEBUG_MAC_ESP - printk("mac_esp: dma_led_on: called\n"); -#endif -} - - -static int dma_ports_p(struct NCR_ESP * esp) -{ - return 0; -} - - -static void dma_setup(struct NCR_ESP * esp, __u32 addr, int count, int write) -{ - -#ifdef DEBUG_MAC_ESP - printk("mac_esp: dma_setup\n"); -#endif - - if (write) { - dma_init_read(esp, (char *) addr, count); - } else { - dma_init_write(esp, (char *) addr, count); - } -} - - -static void dma_setup_quick(struct NCR_ESP * esp, __u32 addr, int count, int write) -{ -#ifdef DEBUG_MAC_ESP - printk("mac_esp: dma_setup_quick\n"); -#endif -} - -static struct scsi_host_template driver_template = { - .proc_name = "mac_esp", - .name = "Mac 53C9x SCSI", - .detect = mac_esp_detect, - .slave_alloc = esp_slave_alloc, - .slave_destroy = esp_slave_destroy, - .release = mac_esp_release, - .info = esp_info, - .queuecommand = esp_queue, - .eh_abort_handler = esp_abort, - .eh_bus_reset_handler = esp_reset, - .can_queue = 7, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = DISABLE_CLUSTERING -}; - - -#include "scsi_module.c" - -MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/mca_53c9x.c b/drivers/scsi/mca_53c9x.c deleted file mode 100644 index d693d0f2139..00000000000 --- a/drivers/scsi/mca_53c9x.c +++ /dev/null @@ -1,520 +0,0 @@ -/* mca_53c9x.c: Driver for the SCSI adapter found on NCR 35xx - * (and maybe some other) Microchannel machines - * - * Code taken mostly from Cyberstorm SCSI drivers - * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk) - * - * Hacked to work with the NCR MCA stuff by Tymm Twillman (tymm@computer.org) - * - * The CyberStorm SCSI driver (and this driver) is based on David S. Miller's - * ESP driver * for the Sparc computers. - * - * Special thanks to Ken Stewart at Symbios (LSI) for helping with info on - * the 86C01. I was on the brink of going ga-ga... - * - * Also thanks to Jesper Skov for helping me with info on how the Amiga - * does things... - */ - -/* - * This is currently only set up to use one 53c9x card at a time; it could be - * changed fairly easily to detect/use more than one, but I'm not too sure how - * many cards that use the 53c9x on MCA systems there are (if, in fact, there - * are cards that use them, other than the one built into some NCR systems)... - * If anyone requests this, I'll throw it in, otherwise it's not worth the - * effort. - */ - -/* - * Info on the 86C01 MCA interface chip at the bottom, if you care enough to - * look. - */ - -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/mca.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/blkdev.h> -#include <linux/proc_fs.h> -#include <linux/stat.h> -#include <linux/mca-legacy.h> - -#include "scsi.h" -#include <scsi/scsi_host.h> -#include "NCR53C9x.h" - -#include <asm/dma.h> -#include <asm/irq.h> -#include <asm/mca_dma.h> -#include <asm/pgtable.h> - -/* - * From ibmmca.c (IBM scsi controller card driver) -- used for turning PS2 disk - * activity LED on and off - */ - -#define PS2_SYS_CTR 0x92 - -/* Ports the ncr's 53c94 can be put at; indexed by pos register value */ - -#define MCA_53C9X_IO_PORTS { \ - 0x0000, 0x0240, 0x0340, 0x0400, \ - 0x0420, 0x3240, 0x8240, 0xA240, \ - } - -/* - * Supposedly there were some cards put together with the 'c9x and 86c01. If - * they have different ID's from the ones on the 3500 series machines, - * you can add them here and hopefully things will work out. - */ - -#define MCA_53C9X_IDS { \ - 0x7F4C, \ - 0x0000, \ - } - -static int dma_bytes_sent(struct NCR_ESP *, int); -static int dma_can_transfer(struct NCR_ESP *, Scsi_Cmnd *); -static void dma_dump_state(struct NCR_ESP *); -static void dma_init_read(struct NCR_ESP *, __u32, int); -static void dma_init_write(struct NCR_ESP *, __u32, int); -static void dma_ints_off(struct NCR_ESP *); -static void dma_ints_on(struct NCR_ESP *); -static int dma_irq_p(struct NCR_ESP *); -static int dma_ports_p(struct NCR_ESP *); -static void dma_setup(struct NCR_ESP *, __u32, int, int); -static void dma_led_on(struct NCR_ESP *); -static void dma_led_off(struct NCR_ESP *); - -/* This is where all commands are put before they are trasfered to the - * 53c9x via PIO. - */ - -static volatile unsigned char cmd_buffer[16]; - -/* - * We keep the structure that is used to access the registers on the 53c9x - * here. - */ - -static struct ESP_regs eregs; - -/***************************************************************** Detection */ -static int mca_esp_detect(struct scsi_host_template *tpnt) -{ - struct NCR_ESP *esp; - static int io_port_by_pos[] = MCA_53C9X_IO_PORTS; - int mca_53c9x_ids[] = MCA_53C9X_IDS; - int *id_to_check = mca_53c9x_ids; - int slot; - int pos[3]; - unsigned int tmp_io_addr; - unsigned char tmp_byte; - - - if (!MCA_bus) - return 0; - - while (*id_to_check) { - if ((slot = mca_find_adapter(*id_to_check, 0)) != - MCA_NOTFOUND) - { - esp = esp_allocate(tpnt, NULL, 0); - - pos[0] = mca_read_stored_pos(slot, 2); - pos[1] = mca_read_stored_pos(slot, 3); - pos[2] = mca_read_stored_pos(slot, 4); - - esp->eregs = &eregs; - - /* - * IO port base is given in the first (non-ID) pos - * register, like so: - * - * Bits 3 2 1 IO base - * ---------------------------- - * 0 0 0 <disabled> - * 0 0 1 0x0240 - * 0 1 0 0x0340 - * 0 1 1 0x0400 - * 1 0 0 0x0420 - * 1 0 1 0x3240 - * 1 1 0 0x8240 - * 1 1 1 0xA240 - */ - - tmp_io_addr = - io_port_by_pos[(pos[0] & 0x0E) >> 1]; - - esp->eregs->io_addr = tmp_io_addr + 0x10; - - if (esp->eregs->io_addr == 0x0000) { - printk("Adapter is disabled.\n"); - break; - } - - /* - * IRQ is specified in bits 4 and 5: - * - * Bits 4 5 IRQ - * ----------------------- - * 0 0 3 - * 0 1 5 - * 1 0 7 - * 1 1 9 - */ - - esp->irq = ((pos[0] & 0x30) >> 3) + 3; - - /* - * DMA channel is in the low 3 bits of the second - * POS register - */ - - esp->dma = pos[1] & 7; - esp->slot = slot; - - if (request_irq(esp->irq, esp_intr, 0, - "NCR 53c9x SCSI", esp->ehost)) - { - printk("Unable to request IRQ %d.\n", esp->irq); - esp_deallocate(esp); - scsi_unregister(esp->ehost); - return 0; - } - - if (request_dma(esp->dma, "NCR 53c9x SCSI")) { - printk("Unable to request DMA channel %d.\n", - esp->dma); - free_irq(esp->irq, esp_intr); - esp_deallocate(esp); - scsi_unregister(esp->ehost); - return 0; - } - - request_region(tmp_io_addr, 32, "NCR 53c9x SCSI"); - - /* - * 86C01 handles DMA, IO mode, from address - * (base + 0x0a) - */ - - mca_disable_dma(esp->dma); - mca_set_dma_io(esp->dma, tmp_io_addr + 0x0a); - mca_enable_dma(esp->dma); - - /* Tell the 86C01 to give us interrupts */ - - tmp_byte = inb(tmp_io_addr + 0x02) | 0x40; - outb(tmp_byte, tmp_io_addr + 0x02); - - /* - * Scsi ID -- general purpose register, hi - * 2 bits; add 4 to this number to get the - * ID - */ - - esp->scsi_id = ((pos[2] & 0xC0) >> 6) + 4; - - /* Do command transfer with programmed I/O */ - - esp->do_pio_cmds = 1; - - /* Required functions */ - - esp->dma_bytes_sent = &dma_bytes_sent; - esp->dma_can_transfer = &dma_can_transfer; - esp->dma_dump_state = &dma_dump_state; - esp->dma_init_read = &dma_init_read; - esp->dma_init_write = &dma_init_write; - esp->dma_ints_off = &dma_ints_off; - esp->dma_ints_on = &dma_ints_on; - esp->dma_irq_p = &dma_irq_p; - esp->dma_ports_p = &dma_ports_p; - esp->dma_setup = &dma_setup; - - /* Optional functions */ - - esp->dma_barrier = NULL; - esp->dma_drain = NULL; - esp->dma_invalidate = NULL; - esp->dma_irq_entry = NULL; - esp->dma_irq_exit = NULL; - esp->dma_led_on = dma_led_on; - esp->dma_led_off = dma_led_off; - esp->dma_poll = NULL; - esp->dma_reset = NULL; - - /* Set the command buffer */ - - esp->esp_command = (volatile unsigned char*) - cmd_buffer; - esp->esp_command_dvma = isa_virt_to_bus(cmd_buffer); - - /* SCSI chip speed */ - - esp->cfreq = 25000000; - - /* Differential SCSI? I think not. */ - - esp->diff = 0; - - esp_initialize(esp); - - printk(" Adapter found in slot %2d: io port 0x%x " - "irq %d dma channel %d\n", slot + 1, tmp_io_addr, - esp->irq, esp->dma); - - mca_set_adapter_name(slot, "NCR 53C9X SCSI Adapter"); - mca_mark_as_used(slot); - - break; - } - - id_to_check++; - } - - return esps_in_use; -} - - -/******************************************************************* Release */ - -static int mca_esp_release(struct Scsi_Host *host) -{ - struct NCR_ESP *esp = (struct NCR_ESP *)host->hostdata; - unsigned char tmp_byte; - - esp_deallocate(esp); - /* - * Tell the 86C01 to stop sending interrupts - */ - - tmp_byte = inb(esp->eregs->io_addr - 0x0E); - tmp_byte &= ~0x40; - outb(tmp_byte, esp->eregs->io_addr - 0x0E); - - free_irq(esp->irq, esp_intr); - free_dma(esp->dma); - - mca_mark_as_unused(esp->slot); - - return 0; -} - -/************************************************************* DMA Functions */ -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count) -{ - /* Ask the 53c9x. It knows. */ - - return fifo_count; -} - -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - /* - * The MCA dma channels can only do up to 128K bytes at a time. - * (16 bit mode) - */ - - unsigned long sz = sp->SCp.this_residual; - if(sz > 0x20000) - sz = 0x20000; - return sz; -} - -static void dma_dump_state(struct NCR_ESP *esp) -{ - /* - * Doesn't quite match up to the other drivers, but we do what we - * can. - */ - - ESPLOG(("esp%d: dma channel <%d>\n", esp->esp_id, esp->dma)); - ESPLOG(("bytes left to dma: %d\n", mca_get_dma_residue(esp->dma))); -} - -static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length) -{ - unsigned long flags; - - - save_flags(flags); - cli(); - - mca_disable_dma(esp->dma); - mca_set_dma_mode(esp->dma, MCA_DMA_MODE_XFER | MCA_DMA_MODE_16 | - MCA_DMA_MODE_IO); - mca_set_dma_addr(esp->dma, addr); - mca_set_dma_count(esp->dma, length / 2); /* !!! */ - mca_enable_dma(esp->dma); - - restore_flags(flags); -} - -static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length) -{ - unsigned long flags; - - - save_flags(flags); - cli(); - - mca_disable_dma(esp->dma); - mca_set_dma_mode(esp->dma, MCA_DMA_MODE_XFER | MCA_DMA_MODE_WRITE | - MCA_DMA_MODE_16 | MCA_DMA_MODE_IO); - mca_set_dma_addr(esp->dma, addr); - mca_set_dma_count(esp->dma, length / 2); /* !!! */ - mca_enable_dma(esp->dma); - - restore_flags(flags); -} - -static void dma_ints_off(struct NCR_ESP *esp) -{ - /* - * Tell the 'C01 to shut up. All interrupts are routed through it. - */ - - outb(inb(esp->eregs->io_addr - 0x0E) & ~0x40, - esp->eregs->io_addr - 0x0E); -} - -static void dma_ints_on(struct NCR_ESP *esp) -{ - /* - * Ok. You can speak again. - */ - - outb(inb(esp->eregs->io_addr - 0x0E) | 0x40, - esp->eregs->io_addr - 0x0E); -} - -static int dma_irq_p(struct NCR_ESP *esp) -{ - /* - * DaveM says that this should return a "yes" if there is an interrupt - * or a DMA error occurred. I copied the Amiga driver's semantics, - * though, because it seems to work and we can't really tell if - * a DMA error happened. This gives the "yes" if the scsi chip - * is sending an interrupt and no DMA activity is taking place - */ - - return (!(inb(esp->eregs->io_addr - 0x04) & 1) && - !(inb(esp->eregs->io_addr - 0x04) & 2) ); -} - -static int dma_ports_p(struct NCR_ESP *esp) -{ - /* - * Check to see if interrupts are enabled on the 'C01 (in case abort - * is entered multiple times, so we only do the abort once) - */ - - return (inb(esp->eregs->io_addr - 0x0E) & 0x40) ? 1:0; -} - -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write) -{ - if(write){ - dma_init_write(esp, addr, count); - } else { - dma_init_read(esp, addr, count); - } -} - -/* - * These will not play nicely with other disk controllers that try to use the - * disk active LED... but what can you do? Don't answer that. - * - * Stolen shamelessly from ibmmca.c -- IBM Microchannel SCSI adapter driver - * - */ - -static void dma_led_on(struct NCR_ESP *esp) -{ - outb(inb(PS2_SYS_CTR) | 0xc0, PS2_SYS_CTR); -} - -static void dma_led_off(struct NCR_ESP *esp) -{ - outb(inb(PS2_SYS_CTR) & 0x3f, PS2_SYS_CTR); -} - -static struct scsi_host_template driver_template = { - .proc_name = "mca_53c9x", - .name = "NCR 53c9x SCSI", - .detect = mca_esp_detect, - .slave_alloc = esp_slave_alloc, - .slave_destroy = esp_slave_destroy, - .release = mca_esp_release, - .queuecommand = esp_queue, - .eh_abort_handler = esp_abort, - .eh_bus_reset_handler = esp_reset, - .can_queue = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .unchecked_isa_dma = 1, - .use_clustering = DISABLE_CLUSTERING -}; - - -#include "scsi_module.c" - -/* - * OK, here's the goods I promised. The NCR 86C01 is an MCA interface chip - * that handles enabling/diabling IRQ, dma interfacing, IO port selection - * and other fun stuff. It takes up 16 addresses, and the chip it is - * connnected to gets the following 16. Registers are as follows: - * - * Offsets 0-1 : Card ID - * - * Offset 2 : Mode enable register -- - * Bit 7 : Data Word width (1 = 16, 0 = 8) - * Bit 6 : IRQ enable (1 = enabled) - * Bits 5,4 : IRQ select - * 0 0 : IRQ 3 - * 0 1 : IRQ 5 - * 1 0 : IRQ 7 - * 1 1 : IRQ 9 - * Bits 3-1 : Base Address - * 0 0 0 : <disabled> - * 0 0 1 : 0x0240 - * 0 1 0 : 0x0340 - * 0 1 1 : 0x0400 - * 1 0 0 : 0x0420 - * 1 0 1 : 0x3240 - * 1 1 0 : 0x8240 - * 1 1 1 : 0xA240 - * Bit 0 : Card enable (1 = enabled) - * - * Offset 3 : DMA control register -- - * Bit 7 : DMA enable (1 = enabled) - * Bits 6,5 : Preemt Count Select (transfers to complete after - * 'C01 has been preempted on MCA bus) - * 0 0 : 0 - * 0 1 : 1 - * 1 0 : 3 - * 1 1 : 7 - * (all these wacky numbers; I'm sure there's a reason somewhere) - * Bit 4 : Fairness enable (1 = fair bus priority) - * Bits 3-0 : Arbitration level (0-15 consecutive) - * - * Offset 4 : General purpose register - * Bits 7-3 : User definable (here, 7,6 are SCSI ID) - * Bits 2-0 : reserved - * - * Offset 10 : DMA decode register (used for IO based DMA; also can do - * PIO through this port) - * - * Offset 12 : Status - * Bits 7-2 : reserved - * Bit 1 : DMA pending (1 = pending) - * Bit 0 : IRQ pending (0 = pending) - * - * Exciting, huh? - * - */ diff --git a/drivers/scsi/oktagon_esp.c b/drivers/scsi/oktagon_esp.c deleted file mode 100644 index 8e5eadbd5c5..00000000000 --- a/drivers/scsi/oktagon_esp.c +++ /dev/null @@ -1,606 +0,0 @@ -/* - * Oktagon_esp.c -- Driver for bsc Oktagon - * - * Written by Carsten Pluntke 1998 - * - * Based on cyber_esp.c - */ - - -#if defined(CONFIG_AMIGA) || defined(CONFIG_APUS) -#define USE_BOTTOM_HALF -#endif - -#include <linux/module.h> - -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/blkdev.h> -#include <linux/proc_fs.h> -#include <linux/stat.h> -#include <linux/reboot.h> -#include <asm/system.h> -#include <asm/ptrace.h> -#include <asm/pgtable.h> - - -#include "scsi.h" -#include <scsi/scsi_host.h> -#include "NCR53C9x.h" - -#include <linux/zorro.h> -#include <asm/irq.h> -#include <asm/amigaints.h> -#include <asm/amigahw.h> - -#ifdef USE_BOTTOM_HALF -#include <linux/workqueue.h> -#include <linux/interrupt.h> -#endif - -/* The controller registers can be found in the Z2 config area at these - * offsets: - */ -#define OKTAGON_ESP_ADDR 0x03000 -#define OKTAGON_DMA_ADDR 0x01000 - - -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count); -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp); -static void dma_dump_state(struct NCR_ESP *esp); -static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length); -static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length); -static void dma_ints_off(struct NCR_ESP *esp); -static void dma_ints_on(struct NCR_ESP *esp); -static int dma_irq_p(struct NCR_ESP *esp); -static void dma_led_off(struct NCR_ESP *esp); -static void dma_led_on(struct NCR_ESP *esp); -static int dma_ports_p(struct NCR_ESP *esp); -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write); - -static void dma_irq_exit(struct NCR_ESP *esp); -static void dma_invalidate(struct NCR_ESP *esp); - -static void dma_mmu_get_scsi_one(struct NCR_ESP *,Scsi_Cmnd *); -static void dma_mmu_get_scsi_sgl(struct NCR_ESP *,Scsi_Cmnd *); -static void dma_mmu_release_scsi_one(struct NCR_ESP *,Scsi_Cmnd *); -static void dma_mmu_release_scsi_sgl(struct NCR_ESP *,Scsi_Cmnd *); -static void dma_advance_sg(Scsi_Cmnd *); -static int oktagon_notify_reboot(struct notifier_block *this, unsigned long code, void *x); - -#ifdef USE_BOTTOM_HALF -static void dma_commit(struct work_struct *unused); - -long oktag_to_io(long *paddr, long *addr, long len); -long oktag_from_io(long *addr, long *paddr, long len); - -static DECLARE_WORK(tq_fake_dma, dma_commit); - -#define DMA_MAXTRANSFER 0x8000 - -#else - -/* - * No bottom half. Use transfer directly from IRQ. Find a narrow path - * between too much IRQ overhead and clogging the IRQ for too long. - */ - -#define DMA_MAXTRANSFER 0x1000 - -#endif - -static struct notifier_block oktagon_notifier = { - oktagon_notify_reboot, - NULL, - 0 -}; - -static long *paddress; -static long *address; -static long len; -static long dma_on; -static int direction; -static struct NCR_ESP *current_esp; - - -static volatile unsigned char cmd_buffer[16]; - /* This is where all commands are put - * before they are trasfered to the ESP chip - * via PIO. - */ - -/***************************************************************** Detection */ -int oktagon_esp_detect(struct scsi_host_template *tpnt) -{ - struct NCR_ESP *esp; - struct zorro_dev *z = NULL; - unsigned long address; - struct ESP_regs *eregs; - - while ((z = zorro_find_device(ZORRO_PROD_BSC_OKTAGON_2008, z))) { - unsigned long board = z->resource.start; - if (request_mem_region(board+OKTAGON_ESP_ADDR, - sizeof(struct ESP_regs), "NCR53C9x")) { - /* - * It is a SCSI controller. - * Hardwire Host adapter to SCSI ID 7 - */ - - address = (unsigned long)ZTWO_VADDR(board); - eregs = (struct ESP_regs *)(address + OKTAGON_ESP_ADDR); - - /* This line was 5 lines lower */ - esp = esp_allocate(tpnt, (void *)board + OKTAGON_ESP_ADDR, 0); - - /* we have to shift the registers only one bit for oktagon */ - esp->shift = 1; - - esp_write(eregs->esp_cfg1, (ESP_CONFIG1_PENABLE | 7)); - udelay(5); - if (esp_read(eregs->esp_cfg1) != (ESP_CONFIG1_PENABLE | 7)) - return 0; /* Bail out if address did not hold data */ - - /* Do command transfer with programmed I/O */ - esp->do_pio_cmds = 1; - - /* Required functions */ - esp->dma_bytes_sent = &dma_bytes_sent; - esp->dma_can_transfer = &dma_can_transfer; - esp->dma_dump_state = &dma_dump_state; - esp->dma_init_read = &dma_init_read; - esp->dma_init_write = &dma_init_write; - esp->dma_ints_off = &dma_ints_off; - esp->dma_ints_on = &dma_ints_on; - esp->dma_irq_p = &dma_irq_p; - esp->dma_ports_p = &dma_ports_p; - esp->dma_setup = &dma_setup; - - /* Optional functions */ - esp->dma_barrier = 0; - esp->dma_drain = 0; - esp->dma_invalidate = &dma_invalidate; - esp->dma_irq_entry = 0; - esp->dma_irq_exit = &dma_irq_exit; - esp->dma_led_on = &dma_led_on; - esp->dma_led_off = &dma_led_off; - esp->dma_poll = 0; - esp->dma_reset = 0; - - esp->dma_mmu_get_scsi_one = &dma_mmu_get_scsi_one; - esp->dma_mmu_get_scsi_sgl = &dma_mmu_get_scsi_sgl; - esp->dma_mmu_release_scsi_one = &dma_mmu_release_scsi_one; - esp->dma_mmu_release_scsi_sgl = &dma_mmu_release_scsi_sgl; - esp->dma_advance_sg = &dma_advance_sg; - - /* SCSI chip speed */ - /* Looking at the quartz of the SCSI board... */ - esp->cfreq = 25000000; - - /* The DMA registers on the CyberStorm are mapped - * relative to the device (i.e. in the same Zorro - * I/O block). - */ - esp->dregs = (void *)(address + OKTAGON_DMA_ADDR); - - paddress = (long *) esp->dregs; - - /* ESP register base */ - esp->eregs = eregs; - - /* Set the command buffer */ - esp->esp_command = (volatile unsigned char*) cmd_buffer; - - /* Yes, the virtual address. See below. */ - esp->esp_command_dvma = (__u32) cmd_buffer; - - esp->irq = IRQ_AMIGA_PORTS; - request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED, - "BSC Oktagon SCSI", esp->ehost); - - /* Figure out our scsi ID on the bus */ - esp->scsi_id = 7; - - /* We don't have a differential SCSI-bus. */ - esp->diff = 0; - - esp_initialize(esp); - - printk("ESP_Oktagon Driver 1.1" -#ifdef USE_BOTTOM_HALF - " [BOTTOM_HALF]" -#else - " [IRQ]" -#endif - " registered.\n"); - printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps,esps_in_use); - esps_running = esps_in_use; - current_esp = esp; - register_reboot_notifier(&oktagon_notifier); - return esps_in_use; - } - } - return 0; -} - - -/* - * On certain configurations the SCSI equipment gets confused on reboot, - * so we have to reset it then. - */ - -static int -oktagon_notify_reboot(struct notifier_block *this, unsigned long code, void *x) -{ - struct NCR_ESP *esp; - - if((code == SYS_DOWN || code == SYS_HALT) && (esp = current_esp)) - { - esp_bootup_reset(esp,esp->eregs); - udelay(500); /* Settle time. Maybe unnecessary. */ - } - return NOTIFY_DONE; -} - - - -#ifdef USE_BOTTOM_HALF - - -/* - * The bsc Oktagon controller has no real DMA, so we have to do the 'DMA - * transfer' in the interrupt (Yikes!) or use a bottom half to not to clutter - * IRQ's for longer-than-good. - * - * FIXME - * BIG PROBLEM: 'len' is usually the buffer length, not the expected length - * of the data. So DMA may finish prematurely, further reads lead to - * 'machine check' on APUS systems (don't know about m68k systems, AmigaOS - * deliberately ignores the bus faults) and a normal copy-loop can't - * be exited prematurely just at the right moment by the dma_invalidate IRQ. - * So do it the hard way, write an own copier in assembler and - * catch the exception. - * -- Carsten - */ - - -static void dma_commit(struct work_struct *unused) -{ - long wait,len2,pos; - struct NCR_ESP *esp; - - ESPDATA(("Transfer: %ld bytes, Address 0x%08lX, Direction: %d\n", - len,(long) address,direction)); - dma_ints_off(current_esp); - - pos = 0; - wait = 1; - if(direction) /* write? (memory to device) */ - { - while(len > 0) - { - len2 = oktag_to_io(paddress, address+pos, len); - if(!len2) - { - if(wait > 1000) - { - printk("Expedited DMA exit (writing) %ld\n",len); - break; - } - mdelay(wait); - wait *= 2; - } - pos += len2; - len -= len2*sizeof(long); - } - } else { - while(len > 0) - { - len2 = oktag_from_io(address+pos, paddress, len); - if(!len2) - { - if(wait > 1000) - { - printk("Expedited DMA exit (reading) %ld\n",len); - break; - } - mdelay(wait); - wait *= 2; - } - pos += len2; - len -= len2*sizeof(long); - } - } - - /* to make esp->shift work */ - esp=current_esp; - -#if 0 - len2 = (esp_read(current_esp->eregs->esp_tclow) & 0xff) | - ((esp_read(current_esp->eregs->esp_tcmed) & 0xff) << 8); - - /* - * Uh uh. If you see this, len and transfer count registers were out of - * sync. That means really serious trouble. - */ - - if(len2) - printk("Eeeek!! Transfer count still %ld!\n",len2); -#endif - - /* - * Normally we just need to exit and wait for the interrupt to come. - * But at least one device (my Microtek ScanMaker 630) regularly mis- - * calculates the bytes it should send which is really ugly because - * it locks up the SCSI bus if not accounted for. - */ - - if(!(esp_read(current_esp->eregs->esp_status) & ESP_STAT_INTR)) - { - long len = 100; - long trash[10]; - - /* - * Interrupt bit was not set. Either the device is just plain lazy - * so we give it a 10 ms chance or... - */ - while(len-- && (!(esp_read(current_esp->eregs->esp_status) & ESP_STAT_INTR))) - udelay(100); - - - if(!(esp_read(current_esp->eregs->esp_status) & ESP_STAT_INTR)) - { - /* - * So we think that the transfer count is out of sync. Since we - * have all we want we are happy and can ditch the trash. - */ - - len = DMA_MAXTRANSFER; - - while(len-- && (!(esp_read(current_esp->eregs->esp_status) & ESP_STAT_INTR))) - oktag_from_io(trash,paddress,2); - - if(!(esp_read(current_esp->eregs->esp_status) & ESP_STAT_INTR)) - { - /* - * Things really have gone wrong. If we leave the system in that - * state, the SCSI bus is locked forever. I hope that this will - * turn the system in a more or less running state. - */ - printk("Device is bolixed, trying bus reset...\n"); - esp_bootup_reset(current_esp,current_esp->eregs); - } - } - } - - ESPDATA(("Transfer_finale: do_data_finale should come\n")); - - len = 0; - dma_on = 0; - dma_ints_on(current_esp); -} - -#endif - -/************************************************************* DMA Functions */ -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count) -{ - /* Since the CyberStorm DMA is fully dedicated to the ESP chip, - * the number of bytes sent (to the ESP chip) equals the number - * of bytes in the FIFO - there is no buffering in the DMA controller. - * XXXX Do I read this right? It is from host to ESP, right? - */ - return fifo_count; -} - -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - unsigned long sz = sp->SCp.this_residual; - if(sz > DMA_MAXTRANSFER) - sz = DMA_MAXTRANSFER; - return sz; -} - -static void dma_dump_state(struct NCR_ESP *esp) -{ -} - -/* - * What the f$@& is this? - * - * Some SCSI devices (like my Microtek ScanMaker 630 scanner) want to transfer - * more data than requested. How much? Dunno. So ditch the bogus data into - * the sink, hoping the device will advance to the next phase sooner or later. - * - * -- Carsten - */ - -static long oktag_eva_buffer[16]; /* The data sink */ - -static void oktag_check_dma(void) -{ - struct NCR_ESP *esp; - - esp=current_esp; - if(!len) - { - address = oktag_eva_buffer; - len = 2; - /* esp_do_data sets them to zero like len */ - esp_write(current_esp->eregs->esp_tclow,2); - esp_write(current_esp->eregs->esp_tcmed,0); - } -} - -static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length) -{ - /* Zorro is noncached, everything else done using processor. */ - /* cache_clear(addr, length); */ - - if(dma_on) - panic("dma_init_read while dma process is initialized/running!\n"); - direction = 0; - address = (long *) vaddress; - current_esp = esp; - len = length; - oktag_check_dma(); - dma_on = 1; -} - -static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length) -{ - /* cache_push(addr, length); */ - - if(dma_on) - panic("dma_init_write while dma process is initialized/running!\n"); - direction = 1; - address = (long *) vaddress; - current_esp = esp; - len = length; - oktag_check_dma(); - dma_on = 1; -} - -static void dma_ints_off(struct NCR_ESP *esp) -{ - disable_irq(esp->irq); -} - -static void dma_ints_on(struct NCR_ESP *esp) -{ - enable_irq(esp->irq); -} - -static int dma_irq_p(struct NCR_ESP *esp) -{ - /* It's important to check the DMA IRQ bit in the correct way! */ - return (esp_read(esp->eregs->esp_status) & ESP_STAT_INTR); -} - -static void dma_led_off(struct NCR_ESP *esp) -{ -} - -static void dma_led_on(struct NCR_ESP *esp) -{ -} - -static int dma_ports_p(struct NCR_ESP *esp) -{ - return ((amiga_custom.intenar) & IF_PORTS); -} - -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write) -{ - /* On the Sparc, DMA_ST_WRITE means "move data from device to memory" - * so when (write) is true, it actually means READ! - */ - if(write){ - dma_init_read(esp, addr, count); - } else { - dma_init_write(esp, addr, count); - } -} - -/* - * IRQ entry when DMA transfer is ready to be started - */ - -static void dma_irq_exit(struct NCR_ESP *esp) -{ -#ifdef USE_BOTTOM_HALF - if(dma_on) - { - schedule_work(&tq_fake_dma); - } -#else - while(len && !dma_irq_p(esp)) - { - if(direction) - *paddress = *address++; - else - *address++ = *paddress; - len -= (sizeof(long)); - } - len = 0; - dma_on = 0; -#endif -} - -/* - * IRQ entry when DMA has just finished - */ - -static void dma_invalidate(struct NCR_ESP *esp) -{ -} - -/* - * Since the processor does the data transfer we have to use the custom - * mmu interface to pass the virtual address, not the physical. - */ - -void dma_mmu_get_scsi_one(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - sp->SCp.ptr = - sp->request_buffer; -} - -void dma_mmu_get_scsi_sgl(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - sp->SCp.ptr = sg_virt(sp->SCp.buffer); -} - -void dma_mmu_release_scsi_one(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ -} - -void dma_mmu_release_scsi_sgl(struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ -} - -void dma_advance_sg(Scsi_Cmnd *sp) -{ - sp->SCp.ptr = sg_virt(sp->SCp.buffer); -} - - -#define HOSTS_C - -int oktagon_esp_release(struct Scsi_Host *instance) -{ -#ifdef MODULE - unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev; - esp_release(); - release_mem_region(address, sizeof(struct ESP_regs)); - free_irq(IRQ_AMIGA_PORTS, esp_intr); - unregister_reboot_notifier(&oktagon_notifier); -#endif - return 1; -} - - -static struct scsi_host_template driver_template = { - .proc_name = "esp-oktagon", - .proc_info = &esp_proc_info, - .name = "BSC Oktagon SCSI", - .detect = oktagon_esp_detect, - .slave_alloc = esp_slave_alloc, - .slave_destroy = esp_slave_destroy, - .release = oktagon_esp_release, - .queuecommand = esp_queue, - .eh_abort_handler = esp_abort, - .eh_bus_reset_handler = esp_reset, - .can_queue = 7, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = ENABLE_CLUSTERING -}; - - -#include "scsi_module.c" - -MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/oktagon_io.S b/drivers/scsi/oktagon_io.S deleted file mode 100644 index 8a7340b0270..00000000000 --- a/drivers/scsi/oktagon_io.S +++ /dev/null @@ -1,194 +0,0 @@ -/* -*- mode: asm -*- - * Due to problems while transferring data I've put these routines as assembly - * code. - * Since I'm no PPC assembler guru, the code is just the assembler version of - -int oktag_to_io(long *paddr,long *addr,long len) -{ - long *addr2 = addr; - for(len=(len+sizeof(long)-1)/sizeof(long);len--;) - *paddr = *addr2++; - return addr2 - addr; -} - -int oktag_from_io(long *addr,long *paddr,long len) -{ - long *addr2 = addr; - for(len=(len+sizeof(long)-1)/sizeof(long);len--;) - *addr2++ = *paddr; - return addr2 - addr; -} - - * assembled using gcc -O2 -S, with two exception catch points where data - * is moved to/from the IO register. - */ - - -#ifdef CONFIG_APUS - - .file "oktagon_io.c" - -gcc2_compiled.: -/* - .section ".text" -*/ - .align 2 - .globl oktag_to_io - .type oktag_to_io,@function -oktag_to_io: - addi 5,5,3 - srwi 5,5,2 - cmpwi 1,5,0 - mr 9,3 - mr 3,4 - addi 5,5,-1 - bc 12,6,.L3 -.L5: - cmpwi 1,5,0 - lwz 0,0(3) - addi 3,3,4 - addi 5,5,-1 -exp1: stw 0,0(9) - bc 4,6,.L5 -.L3: -ret1: subf 3,4,3 - srawi 3,3,2 - blr -.Lfe1: - .size oktag_to_io,.Lfe1-oktag_to_io - .align 2 - .globl oktag_from_io - .type oktag_from_io,@function -oktag_from_io: - addi 5,5,3 - srwi 5,5,2 - cmpwi 1,5,0 - mr 9,3 - addi 5,5,-1 - bc 12,6,.L9 -.L11: - cmpwi 1,5,0 -exp2: lwz 0,0(4) - addi 5,5,-1 - stw 0,0(3) - addi 3,3,4 - bc 4,6,.L11 -.L9: -ret2: subf 3,9,3 - srawi 3,3,2 - blr -.Lfe2: - .size oktag_from_io,.Lfe2-oktag_from_io - .ident "GCC: (GNU) egcs-2.90.29 980515 (egcs-1.0.3 release)" - -/* - * Exception table. - * Second longword shows where to jump when an exception at the addr the first - * longword is pointing to is caught. - */ - -.section __ex_table,"a" - .align 2 -oktagon_except: - .long exp1,ret1 - .long exp2,ret2 - -#else - -/* -The code which follows is for 680x0 based assembler and is meant for -Linux/m68k. It was created by cross compiling the code using the -instructions given above. I then added the four labels used in the -exception handler table at the bottom of this file. -- Kevin <kcozens@interlog.com> -*/ - -#ifdef CONFIG_AMIGA - - .file "oktagon_io.c" - .version "01.01" -gcc2_compiled.: -.text - .align 2 -.globl oktag_to_io - .type oktag_to_io,@function -oktag_to_io: - link.w %a6,#0 - move.l %d2,-(%sp) - move.l 8(%a6),%a1 - move.l 12(%a6),%d1 - move.l %d1,%a0 - move.l 16(%a6),%d0 - addq.l #3,%d0 - lsr.l #2,%d0 - subq.l #1,%d0 - moveq.l #-1,%d2 - cmp.l %d0,%d2 - jbeq .L3 -.L5: -exp1: - move.l (%a0)+,(%a1) - dbra %d0,.L5 - clr.w %d0 - subq.l #1,%d0 - jbcc .L5 -.L3: -ret1: - move.l %a0,%d0 - sub.l %d1,%d0 - asr.l #2,%d0 - move.l -4(%a6),%d2 - unlk %a6 - rts - -.Lfe1: - .size oktag_to_io,.Lfe1-oktag_to_io - .align 2 -.globl oktag_from_io - .type oktag_from_io,@function -oktag_from_io: - link.w %a6,#0 - move.l %d2,-(%sp) - move.l 8(%a6),%d1 - move.l 12(%a6),%a1 - move.l %d1,%a0 - move.l 16(%a6),%d0 - addq.l #3,%d0 - lsr.l #2,%d0 - subq.l #1,%d0 - moveq.l #-1,%d2 - cmp.l %d0,%d2 - jbeq .L9 -.L11: -exp2: - move.l (%a1),(%a0)+ - dbra %d0,.L11 - clr.w %d0 - subq.l #1,%d0 - jbcc .L11 -.L9: -ret2: - move.l %a0,%d0 - sub.l %d1,%d0 - asr.l #2,%d0 - move.l -4(%a6),%d2 - unlk %a6 - rts -.Lfe2: - .size oktag_from_io,.Lfe2-oktag_from_io - .ident "GCC: (GNU) 2.7.2.1" - -/* - * Exception table. - * Second longword shows where to jump when an exception at the addr the first - * longword is pointing to is caught. - */ - -.section __ex_table,"a" - .align 2 -oktagon_except: - .long exp1,ret1 - .long exp2,ret2 - -#endif -#endif diff --git a/drivers/scsi/ps3rom.c b/drivers/scsi/ps3rom.c index 17b4a7c4618..0cd614a0fa7 100644 --- a/drivers/scsi/ps3rom.c +++ b/drivers/scsi/ps3rom.c @@ -35,7 +35,7 @@ #define BOUNCE_SIZE (64*1024) -#define PS3ROM_MAX_SECTORS (BOUNCE_SIZE / CD_FRAMESIZE) +#define PS3ROM_MAX_SECTORS (BOUNCE_SIZE >> 9) struct ps3rom_private { diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index adf97320574..4894dc886b6 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -428,6 +428,19 @@ qla2x00_sysfs_read_sfp(struct kobject *kobj, if (!capable(CAP_SYS_ADMIN) || off != 0 || count != SFP_DEV_SIZE * 2) return 0; + if (ha->sfp_data) + goto do_read; + + ha->sfp_data = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, + &ha->sfp_data_dma); + if (!ha->sfp_data) { + qla_printk(KERN_WARNING, ha, + "Unable to allocate memory for SFP read-data.\n"); + return 0; + } + +do_read: + memset(ha->sfp_data, 0, SFP_BLOCK_SIZE); addr = 0xa0; for (iter = 0, offset = 0; iter < (SFP_DEV_SIZE * 2) / SFP_BLOCK_SIZE; iter++, offset += SFP_BLOCK_SIZE) { @@ -835,7 +848,7 @@ qla2x00_get_host_port_id(struct Scsi_Host *shost) static void qla2x00_get_host_speed(struct Scsi_Host *shost) { - scsi_qla_host_t *ha = shost_priv(shost); + scsi_qla_host_t *ha = to_qla_parent(shost_priv(shost)); uint32_t speed = 0; switch (ha->link_data_rate) { @@ -848,6 +861,9 @@ qla2x00_get_host_speed(struct Scsi_Host *shost) case PORT_SPEED_4GB: speed = 4; break; + case PORT_SPEED_8GB: + speed = 8; + break; } fc_host_speed(shost) = speed; } @@ -855,7 +871,7 @@ qla2x00_get_host_speed(struct Scsi_Host *shost) static void qla2x00_get_host_port_type(struct Scsi_Host *shost) { - scsi_qla_host_t *ha = shost_priv(shost); + scsi_qla_host_t *ha = to_qla_parent(shost_priv(shost)); uint32_t port_type = FC_PORTTYPE_UNKNOWN; switch (ha->current_topology) { @@ -965,7 +981,7 @@ qla2x00_issue_lip(struct Scsi_Host *shost) static struct fc_host_statistics * qla2x00_get_fc_host_stats(struct Scsi_Host *shost) { - scsi_qla_host_t *ha = shost_priv(shost); + scsi_qla_host_t *ha = to_qla_parent(shost_priv(shost)); int rval; struct link_statistics *stats; dma_addr_t stats_dma; @@ -1049,7 +1065,7 @@ qla2x00_get_host_fabric_name(struct Scsi_Host *shost) static void qla2x00_get_host_port_state(struct Scsi_Host *shost) { - scsi_qla_host_t *ha = shost_priv(shost); + scsi_qla_host_t *ha = to_qla_parent(shost_priv(shost)); if (!ha->flags.online) fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE; diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index b72c7f17085..3750319f496 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2041,8 +2041,6 @@ typedef struct vport_params { #define VP_RET_CODE_NO_MEM 5 #define VP_RET_CODE_NOT_FOUND 6 -#define to_qla_parent(x) (((x)->parent) ? (x)->parent : (x)) - /* * ISP operations */ diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index ba35fc26ce6..193f688ec3d 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -66,6 +66,7 @@ extern int ql2xqfullrampup; extern int num_hosts; extern int qla2x00_loop_reset(scsi_qla_host_t *); +extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int); /* * Global Functions in qla_mid.c source file. diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index d0633ca894b..d5c7853e7eb 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -925,6 +925,16 @@ qla2x00_setup_chip(scsi_qla_host_t *ha) { int rval; uint32_t srisc_address = 0; + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + unsigned long flags; + + if (!IS_FWI2_CAPABLE(ha) && !IS_QLA2100(ha) && !IS_QLA2200(ha)) { + /* Disable SRAM, Instruction RAM and GP RAM parity. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + WRT_REG_WORD(®->hccr, (HCCR_ENABLE_PARITY + 0x0)); + RD_REG_WORD(®->hccr); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + } /* Load firmware sequences */ rval = ha->isp_ops->load_risc(ha, &srisc_address); @@ -968,6 +978,19 @@ qla2x00_setup_chip(scsi_qla_host_t *ha) } } + if (!IS_FWI2_CAPABLE(ha) && !IS_QLA2100(ha) && !IS_QLA2200(ha)) { + /* Enable proper parity. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + if (IS_QLA2300(ha)) + /* SRAM parity */ + WRT_REG_WORD(®->hccr, HCCR_ENABLE_PARITY + 0x1); + else + /* SRAM, Instruction RAM and GP RAM parity */ + WRT_REG_WORD(®->hccr, HCCR_ENABLE_PARITY + 0x7); + RD_REG_WORD(®->hccr); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + } + if (rval) { DEBUG2_3(printk("scsi(%ld): Setup chip **** FAILED ****.\n", ha->host_no)); @@ -3213,9 +3236,6 @@ int qla2x00_abort_isp(scsi_qla_host_t *ha) { int rval; - unsigned long flags = 0; - uint16_t cnt; - srb_t *sp; uint8_t status = 0; if (ha->flags.online) { @@ -3236,19 +3256,8 @@ qla2x00_abort_isp(scsi_qla_host_t *ha) LOOP_DOWN_TIME); } - spin_lock_irqsave(&ha->hardware_lock, flags); /* Requeue all commands in outstanding command list. */ - for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { - sp = ha->outstanding_cmds[cnt]; - if (sp) { - ha->outstanding_cmds[cnt] = NULL; - sp->flags = 0; - sp->cmd->result = DID_RESET << 16; - sp->cmd->host_scribble = (unsigned char *)NULL; - qla2x00_sp_compl(ha, sp); - } - } - spin_unlock_irqrestore(&ha->hardware_lock, flags); + qla2x00_abort_all_cmds(ha, DID_RESET << 16); ha->isp_ops->get_flash_version(ha, ha->request_ring); @@ -3273,6 +3282,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha) clear_bit(ISP_ABORT_RETRY, &ha->dpc_flags); if (ha->eft) { + memset(ha->eft, 0, EFT_SIZE); rval = qla2x00_enable_eft_trace(ha, ha->eft_dma, EFT_NUM_BUFFERS); if (rval) { @@ -3357,60 +3367,15 @@ static int qla2x00_restart_isp(scsi_qla_host_t *ha) { uint8_t status = 0; - struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; - unsigned long flags = 0; uint32_t wait_time; /* If firmware needs to be loaded */ if (qla2x00_isp_firmware(ha)) { ha->flags.online = 0; - if (!(status = ha->isp_ops->chip_diag(ha))) { - if (IS_QLA2100(ha) || IS_QLA2200(ha)) { - status = qla2x00_setup_chip(ha); - goto done; - } - - spin_lock_irqsave(&ha->hardware_lock, flags); - - if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha) && - !IS_QLA25XX(ha)) { - /* - * Disable SRAM, Instruction RAM and GP RAM - * parity. - */ - WRT_REG_WORD(®->hccr, - (HCCR_ENABLE_PARITY + 0x0)); - RD_REG_WORD(®->hccr); - } - - spin_unlock_irqrestore(&ha->hardware_lock, flags); - + if (!(status = ha->isp_ops->chip_diag(ha))) status = qla2x00_setup_chip(ha); - - spin_lock_irqsave(&ha->hardware_lock, flags); - - if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha) && - !IS_QLA25XX(ha)) { - /* Enable proper parity */ - if (IS_QLA2300(ha)) - /* SRAM parity */ - WRT_REG_WORD(®->hccr, - (HCCR_ENABLE_PARITY + 0x1)); - else - /* - * SRAM, Instruction RAM and GP RAM - * parity. - */ - WRT_REG_WORD(®->hccr, - (HCCR_ENABLE_PARITY + 0x7)); - RD_REG_WORD(®->hccr); - } - - spin_unlock_irqrestore(&ha->hardware_lock, flags); - } } - done: if (!status && !(status = qla2x00_init_rings(ha))) { clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags); if (!(status = qla2x00_fw_ready(ha))) { diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index 8e3b04464cf..5d1a3f7c408 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -119,6 +119,13 @@ static __inline__ void qla2x00_check_fabric_devices(scsi_qla_host_t *ha) qla2x00_get_firmware_state(ha, &fw_state); } +static __inline__ scsi_qla_host_t * to_qla_parent(scsi_qla_host_t *); +static __inline__ scsi_qla_host_t * +to_qla_parent(scsi_qla_host_t *ha) +{ + return ha->parent ? ha->parent : ha; +} + /** * qla2x00_issue_marker() - Issue a Marker IOCB if necessary. * @ha: HA context diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 642a0c3f09c..14e6f22944b 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1815,6 +1815,8 @@ int qla2x00_request_irqs(scsi_qla_host_t *ha) { int ret; + device_reg_t __iomem *reg = ha->iobase; + unsigned long flags; /* If possible, enable MSI-X. */ if (!IS_QLA2432(ha) && !IS_QLA2532(ha)) @@ -1846,7 +1848,7 @@ qla2x00_request_irqs(scsi_qla_host_t *ha) DEBUG2(qla_printk(KERN_INFO, ha, "MSI-X: Enabled (0x%X, 0x%X).\n", ha->chip_revision, ha->fw_attributes)); - return ret; + goto clear_risc_ints; } qla_printk(KERN_WARNING, ha, "MSI-X: Falling back-to INTa mode -- %d.\n", ret); @@ -1864,15 +1866,30 @@ skip_msi: ret = request_irq(ha->pdev->irq, ha->isp_ops->intr_handler, IRQF_DISABLED|IRQF_SHARED, QLA2XXX_DRIVER_NAME, ha); - if (!ret) { - ha->flags.inta_enabled = 1; - ha->host->irq = ha->pdev->irq; - } else { + if (ret) { qla_printk(KERN_WARNING, ha, "Failed to reserve interrupt %d already in use.\n", ha->pdev->irq); + goto fail; + } + ha->flags.inta_enabled = 1; + ha->host->irq = ha->pdev->irq; +clear_risc_ints: + + ha->isp_ops->disable_intrs(ha); + spin_lock_irqsave(&ha->hardware_lock, flags); + if (IS_FWI2_CAPABLE(ha)) { + WRT_REG_DWORD(®->isp24.hccr, HCCRX_CLR_HOST_INT); + WRT_REG_DWORD(®->isp24.hccr, HCCRX_CLR_RISC_INT); + } else { + WRT_REG_WORD(®->isp.semaphore, 0); + WRT_REG_WORD(®->isp.hccr, HCCR_CLR_RISC_INT); + WRT_REG_WORD(®->isp.hccr, HCCR_CLR_HOST_INT); } + spin_unlock_irqrestore(&ha->hardware_lock, flags); + ha->isp_ops->enable_intrs(ha); +fail: return ret; } diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 0c10c0b0fb7..99d29fff836 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -980,7 +980,7 @@ qla2x00_init_firmware(scsi_qla_host_t *ha, uint16_t size) DEBUG11(printk("qla2x00_init_firmware(%ld): entered.\n", ha->host_no)); - if (ha->fw_attributes & BIT_2) + if (ha->flags.npiv_supported) mcp->mb[0] = MBC_MID_INITIALIZE_FIRMWARE; else mcp->mb[0] = MBC_INITIALIZE_FIRMWARE; diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 8f69caf8327..3c1b43356ad 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -204,10 +204,8 @@ static int qla2x00_do_dpc(void *data); static void qla2x00_rst_aen(scsi_qla_host_t *); -static uint8_t qla2x00_mem_alloc(scsi_qla_host_t *); +static int qla2x00_mem_alloc(scsi_qla_host_t *); static void qla2x00_mem_free(scsi_qla_host_t *ha); -static int qla2x00_allocate_sp_pool( scsi_qla_host_t *ha); -static void qla2x00_free_sp_pool(scsi_qla_host_t *ha); static void qla2x00_sp_free_dma(scsi_qla_host_t *, srb_t *); /* -------------------------------------------------------------------------- */ @@ -1117,6 +1115,27 @@ qla2x00_device_reset(scsi_qla_host_t *ha, fc_port_t *reset_fcport) return ha->isp_ops->abort_target(reset_fcport); } +void +qla2x00_abort_all_cmds(scsi_qla_host_t *ha, int res) +{ + int cnt; + unsigned long flags; + srb_t *sp; + + spin_lock_irqsave(&ha->hardware_lock, flags); + for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { + sp = ha->outstanding_cmds[cnt]; + if (sp) { + ha->outstanding_cmds[cnt] = NULL; + sp->flags = 0; + sp->cmd->result = res; + sp->cmd->host_scribble = (unsigned char *)NULL; + qla2x00_sp_compl(ha, sp); + } + } + spin_unlock_irqrestore(&ha->hardware_lock, flags); +} + static int qla2xxx_slave_alloc(struct scsi_device *sdev) { @@ -1557,10 +1576,8 @@ static int __devinit qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) { int ret = -ENODEV; - device_reg_t __iomem *reg; struct Scsi_Host *host; scsi_qla_host_t *ha; - unsigned long flags = 0; char pci_info[30]; char fw_str[30]; struct scsi_host_template *sht; @@ -1608,6 +1625,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->parent = NULL; ha->bars = bars; ha->mem_only = mem_only; + spin_lock_init(&ha->hardware_lock); /* Set ISP-type information. */ qla2x00_set_isp_flags(ha); @@ -1621,8 +1639,6 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) "Found an ISP%04X, irq %d, iobase 0x%p\n", pdev->device, pdev->irq, ha->iobase); - spin_lock_init(&ha->hardware_lock); - ha->prev_topology = 0; ha->init_cb_size = sizeof(init_cb_t); ha->mgmt_svr_loop_id = MANAGEMENT_SERVER + ha->vp_idx; @@ -1751,34 +1767,6 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n", ha->host_no, ha)); - ha->isp_ops->disable_intrs(ha); - - spin_lock_irqsave(&ha->hardware_lock, flags); - reg = ha->iobase; - if (IS_FWI2_CAPABLE(ha)) { - WRT_REG_DWORD(®->isp24.hccr, HCCRX_CLR_HOST_INT); - WRT_REG_DWORD(®->isp24.hccr, HCCRX_CLR_RISC_INT); - } else { - WRT_REG_WORD(®->isp.semaphore, 0); - WRT_REG_WORD(®->isp.hccr, HCCR_CLR_RISC_INT); - WRT_REG_WORD(®->isp.hccr, HCCR_CLR_HOST_INT); - - /* Enable proper parity */ - if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) { - if (IS_QLA2300(ha)) - /* SRAM parity */ - WRT_REG_WORD(®->isp.hccr, - (HCCR_ENABLE_PARITY + 0x1)); - else - /* SRAM, Instruction RAM and GP RAM parity */ - WRT_REG_WORD(®->isp.hccr, - (HCCR_ENABLE_PARITY + 0x7)); - } - } - spin_unlock_irqrestore(&ha->hardware_lock, flags); - - ha->isp_ops->enable_intrs(ha); - pci_set_drvdata(pdev, ha); ha->flags.init_done = 1; @@ -1848,10 +1836,14 @@ qla2x00_remove_one(struct pci_dev *pdev) static void qla2x00_free_device(scsi_qla_host_t *ha) { + qla2x00_abort_all_cmds(ha, DID_NO_CONNECT << 16); + /* Disable timer */ if (ha->timer_active) qla2x00_stop_timer(ha); + ha->flags.online = 0; + /* Kill the kernel thread for this host */ if (ha->dpc_thread) { struct task_struct *t = ha->dpc_thread; @@ -1870,8 +1862,6 @@ qla2x00_free_device(scsi_qla_host_t *ha) if (ha->eft) qla2x00_disable_eft_trace(ha); - ha->flags.online = 0; - /* Stop currently executing firmware. */ qla2x00_try_to_stop_firmware(ha); @@ -2010,196 +2000,109 @@ qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha, int defer) * * Returns: * 0 = success. -* 1 = failure. +* !0 = failure. */ -static uint8_t +static int qla2x00_mem_alloc(scsi_qla_host_t *ha) { char name[16]; - uint8_t status = 1; - int retry= 10; - - do { - /* - * This will loop only once if everything goes well, else some - * number of retries will be performed to get around a kernel - * bug where available mem is not allocated until after a - * little delay and a retry. - */ - ha->request_ring = dma_alloc_coherent(&ha->pdev->dev, - (ha->request_q_length + 1) * sizeof(request_t), - &ha->request_dma, GFP_KERNEL); - if (ha->request_ring == NULL) { - qla_printk(KERN_WARNING, ha, - "Memory Allocation failed - request_ring\n"); - - qla2x00_mem_free(ha); - msleep(100); - - continue; - } - - ha->response_ring = dma_alloc_coherent(&ha->pdev->dev, - (ha->response_q_length + 1) * sizeof(response_t), - &ha->response_dma, GFP_KERNEL); - if (ha->response_ring == NULL) { - qla_printk(KERN_WARNING, ha, - "Memory Allocation failed - response_ring\n"); - - qla2x00_mem_free(ha); - msleep(100); - - continue; - } - - ha->gid_list = dma_alloc_coherent(&ha->pdev->dev, GID_LIST_SIZE, - &ha->gid_list_dma, GFP_KERNEL); - if (ha->gid_list == NULL) { - qla_printk(KERN_WARNING, ha, - "Memory Allocation failed - gid_list\n"); - - qla2x00_mem_free(ha); - msleep(100); - - continue; - } - - /* get consistent memory allocated for init control block */ - ha->init_cb = dma_alloc_coherent(&ha->pdev->dev, - ha->init_cb_size, &ha->init_cb_dma, GFP_KERNEL); - if (ha->init_cb == NULL) { - qla_printk(KERN_WARNING, ha, - "Memory Allocation failed - init_cb\n"); - - qla2x00_mem_free(ha); - msleep(100); - - continue; - } - memset(ha->init_cb, 0, ha->init_cb_size); - - snprintf(name, sizeof(name), "%s_%ld", QLA2XXX_DRIVER_NAME, - ha->host_no); - ha->s_dma_pool = dma_pool_create(name, &ha->pdev->dev, - DMA_POOL_SIZE, 8, 0); - if (ha->s_dma_pool == NULL) { - qla_printk(KERN_WARNING, ha, - "Memory Allocation failed - s_dma_pool\n"); - - qla2x00_mem_free(ha); - msleep(100); - - continue; - } - - if (qla2x00_allocate_sp_pool(ha)) { - qla_printk(KERN_WARNING, ha, - "Memory Allocation failed - " - "qla2x00_allocate_sp_pool()\n"); - - qla2x00_mem_free(ha); - msleep(100); - - continue; - } - - /* Allocate memory for SNS commands */ - if (IS_QLA2100(ha) || IS_QLA2200(ha)) { - /* Get consistent memory allocated for SNS commands */ - ha->sns_cmd = dma_alloc_coherent(&ha->pdev->dev, - sizeof(struct sns_cmd_pkt), &ha->sns_cmd_dma, - GFP_KERNEL); - if (ha->sns_cmd == NULL) { - /* error */ - qla_printk(KERN_WARNING, ha, - "Memory Allocation failed - sns_cmd\n"); - - qla2x00_mem_free(ha); - msleep(100); - - continue; - } - memset(ha->sns_cmd, 0, sizeof(struct sns_cmd_pkt)); - } else { - /* Get consistent memory allocated for MS IOCB */ - ha->ms_iocb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, - &ha->ms_iocb_dma); - if (ha->ms_iocb == NULL) { - /* error */ - qla_printk(KERN_WARNING, ha, - "Memory Allocation failed - ms_iocb\n"); - - qla2x00_mem_free(ha); - msleep(100); - - continue; - } - memset(ha->ms_iocb, 0, sizeof(ms_iocb_entry_t)); - - /* - * Get consistent memory allocated for CT SNS - * commands - */ - ha->ct_sns = dma_alloc_coherent(&ha->pdev->dev, - sizeof(struct ct_sns_pkt), &ha->ct_sns_dma, - GFP_KERNEL); - if (ha->ct_sns == NULL) { - /* error */ - qla_printk(KERN_WARNING, ha, - "Memory Allocation failed - ct_sns\n"); - qla2x00_mem_free(ha); - msleep(100); + ha->request_ring = dma_alloc_coherent(&ha->pdev->dev, + (ha->request_q_length + 1) * sizeof(request_t), &ha->request_dma, + GFP_KERNEL); + if (!ha->request_ring) + goto fail; + + ha->response_ring = dma_alloc_coherent(&ha->pdev->dev, + (ha->response_q_length + 1) * sizeof(response_t), + &ha->response_dma, GFP_KERNEL); + if (!ha->response_ring) + goto fail_free_request_ring; + + ha->gid_list = dma_alloc_coherent(&ha->pdev->dev, GID_LIST_SIZE, + &ha->gid_list_dma, GFP_KERNEL); + if (!ha->gid_list) + goto fail_free_response_ring; + + ha->init_cb = dma_alloc_coherent(&ha->pdev->dev, ha->init_cb_size, + &ha->init_cb_dma, GFP_KERNEL); + if (!ha->init_cb) + goto fail_free_gid_list; + + snprintf(name, sizeof(name), "%s_%ld", QLA2XXX_DRIVER_NAME, + ha->host_no); + ha->s_dma_pool = dma_pool_create(name, &ha->pdev->dev, + DMA_POOL_SIZE, 8, 0); + if (!ha->s_dma_pool) + goto fail_free_init_cb; - continue; - } - memset(ha->ct_sns, 0, sizeof(struct ct_sns_pkt)); - - if (IS_FWI2_CAPABLE(ha)) { - /* - * Get consistent memory allocated for SFP - * block. - */ - ha->sfp_data = dma_pool_alloc(ha->s_dma_pool, - GFP_KERNEL, &ha->sfp_data_dma); - if (ha->sfp_data == NULL) { - qla_printk(KERN_WARNING, ha, - "Memory Allocation failed - " - "sfp_data\n"); - - qla2x00_mem_free(ha); - msleep(100); - - continue; - } - memset(ha->sfp_data, 0, SFP_BLOCK_SIZE); - } - } - - /* Get memory for cached NVRAM */ - ha->nvram = kzalloc(MAX_NVRAM_SIZE, GFP_KERNEL); - if (ha->nvram == NULL) { - /* error */ - qla_printk(KERN_WARNING, ha, - "Memory Allocation failed - nvram cache\n"); - - qla2x00_mem_free(ha); - msleep(100); - - continue; - } - - /* Done all allocations without any error. */ - status = 0; - - } while (retry-- && status != 0); + ha->srb_mempool = mempool_create_slab_pool(SRB_MIN_REQ, srb_cachep); + if (!ha->srb_mempool) + goto fail_free_s_dma_pool; + + /* Get memory for cached NVRAM */ + ha->nvram = kzalloc(MAX_NVRAM_SIZE, GFP_KERNEL); + if (!ha->nvram) + goto fail_free_srb_mempool; + + /* Allocate memory for SNS commands */ + if (IS_QLA2100(ha) || IS_QLA2200(ha)) { + /* Get consistent memory allocated for SNS commands */ + ha->sns_cmd = dma_alloc_coherent(&ha->pdev->dev, + sizeof(struct sns_cmd_pkt), &ha->sns_cmd_dma, GFP_KERNEL); + if (!ha->sns_cmd) + goto fail_free_nvram; + } else { + /* Get consistent memory allocated for MS IOCB */ + ha->ms_iocb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, + &ha->ms_iocb_dma); + if (!ha->ms_iocb) + goto fail_free_nvram; - if (status) { - printk(KERN_WARNING - "%s(): **** FAILED ****\n", __func__); + /* Get consistent memory allocated for CT SNS commands */ + ha->ct_sns = dma_alloc_coherent(&ha->pdev->dev, + sizeof(struct ct_sns_pkt), &ha->ct_sns_dma, GFP_KERNEL); + if (!ha->ct_sns) + goto fail_free_ms_iocb; } - return(status); + return 0; + +fail_free_ms_iocb: + dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma); + ha->ms_iocb = NULL; + ha->ms_iocb_dma = 0; +fail_free_nvram: + kfree(ha->nvram); + ha->nvram = NULL; +fail_free_srb_mempool: + mempool_destroy(ha->srb_mempool); + ha->srb_mempool = NULL; +fail_free_s_dma_pool: + dma_pool_destroy(ha->s_dma_pool); + ha->s_dma_pool = NULL; +fail_free_init_cb: + dma_free_coherent(&ha->pdev->dev, ha->init_cb_size, ha->init_cb, + ha->init_cb_dma); + ha->init_cb = NULL; + ha->init_cb_dma = 0; +fail_free_gid_list: + dma_free_coherent(&ha->pdev->dev, GID_LIST_SIZE, ha->gid_list, + ha->gid_list_dma); + ha->gid_list = NULL; + ha->gid_list_dma = 0; +fail_free_response_ring: + dma_free_coherent(&ha->pdev->dev, (ha->response_q_length + 1) * + sizeof(response_t), ha->response_ring, ha->response_dma); + ha->response_ring = NULL; + ha->response_dma = 0; +fail_free_request_ring: + dma_free_coherent(&ha->pdev->dev, (ha->request_q_length + 1) * + sizeof(request_t), ha->request_ring, ha->request_dma); + ha->request_ring = NULL; + ha->request_dma = 0; +fail: + return -ENOMEM; } /* @@ -2215,14 +2118,8 @@ qla2x00_mem_free(scsi_qla_host_t *ha) struct list_head *fcpl, *fcptemp; fc_port_t *fcport; - if (ha == NULL) { - /* error */ - DEBUG2(printk("%s(): ERROR invalid ha pointer.\n", __func__)); - return; - } - - /* free sp pool */ - qla2x00_free_sp_pool(ha); + if (ha->srb_mempool) + mempool_destroy(ha->srb_mempool); if (ha->fce) dma_free_coherent(&ha->pdev->dev, FCE_SIZE, ha->fce, @@ -2270,6 +2167,7 @@ qla2x00_mem_free(scsi_qla_host_t *ha) (ha->request_q_length + 1) * sizeof(request_t), ha->request_ring, ha->request_dma); + ha->srb_mempool = NULL; ha->eft = NULL; ha->eft_dma = 0; ha->sns_cmd = NULL; @@ -2308,44 +2206,6 @@ qla2x00_mem_free(scsi_qla_host_t *ha) kfree(ha->nvram); } -/* - * qla2x00_allocate_sp_pool - * This routine is called during initialization to allocate - * memory for local srb_t. - * - * Input: - * ha = adapter block pointer. - * - * Context: - * Kernel context. - */ -static int -qla2x00_allocate_sp_pool(scsi_qla_host_t *ha) -{ - int rval; - - rval = QLA_SUCCESS; - ha->srb_mempool = mempool_create_slab_pool(SRB_MIN_REQ, srb_cachep); - if (ha->srb_mempool == NULL) { - qla_printk(KERN_INFO, ha, "Unable to allocate SRB mempool.\n"); - rval = QLA_FUNCTION_FAILED; - } - return (rval); -} - -/* - * This routine frees all adapter allocated memory. - * - */ -static void -qla2x00_free_sp_pool( scsi_qla_host_t *ha) -{ - if (ha->srb_mempool) { - mempool_destroy(ha->srb_mempool); - ha->srb_mempool = NULL; - } -} - /************************************************************************** * qla2x00_do_dpc * This kernel thread is a task that is schedule by the interrupt handler @@ -2367,6 +2227,9 @@ qla2x00_do_dpc(void *data) fc_port_t *fcport; uint8_t status; uint16_t next_loopid; + struct scsi_qla_host *vha; + int i; + ha = (scsi_qla_host_t *)data; @@ -2409,6 +2272,18 @@ qla2x00_do_dpc(void *data) } clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags); } + + for_each_mapped_vp_idx(ha, i) { + list_for_each_entry(vha, &ha->vp_list, + vp_list) { + if (i == vha->vp_idx) { + set_bit(ISP_ABORT_NEEDED, + &vha->dpc_flags); + break; + } + } + } + DEBUG(printk("scsi(%ld): dpc: qla2x00_abort_isp end\n", ha->host_no)); } @@ -3029,3 +2904,4 @@ MODULE_FIRMWARE(FW_FILE_ISP22XX); MODULE_FIRMWARE(FW_FILE_ISP2300); MODULE_FIRMWARE(FW_FILE_ISP2322); MODULE_FIRMWARE(FW_FILE_ISP24XX); +MODULE_FIRMWARE(FW_FILE_ISP25XX); diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index b68fb73613e..26822c8807e 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -893,6 +893,8 @@ qla2x00_flip_colors(scsi_qla_host_t *ha, uint16_t *pflags) } } +#define PIO_REG(h, r) ((h)->pio_address + offsetof(struct device_reg_2xxx, r)) + void qla2x00_beacon_blink(struct scsi_qla_host *ha) { @@ -902,15 +904,12 @@ qla2x00_beacon_blink(struct scsi_qla_host *ha) unsigned long flags; struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; - if (ha->pio_address) - reg = (struct device_reg_2xxx __iomem *)ha->pio_address; - spin_lock_irqsave(&ha->hardware_lock, flags); /* Save the Original GPIOE. */ if (ha->pio_address) { - gpio_enable = RD_REG_WORD_PIO(®->gpioe); - gpio_data = RD_REG_WORD_PIO(®->gpiod); + gpio_enable = RD_REG_WORD_PIO(PIO_REG(ha, gpioe)); + gpio_data = RD_REG_WORD_PIO(PIO_REG(ha, gpiod)); } else { gpio_enable = RD_REG_WORD(®->gpioe); gpio_data = RD_REG_WORD(®->gpiod); @@ -920,7 +919,7 @@ qla2x00_beacon_blink(struct scsi_qla_host *ha) gpio_enable |= GPIO_LED_MASK; if (ha->pio_address) { - WRT_REG_WORD_PIO(®->gpioe, gpio_enable); + WRT_REG_WORD_PIO(PIO_REG(ha, gpioe), gpio_enable); } else { WRT_REG_WORD(®->gpioe, gpio_enable); RD_REG_WORD(®->gpioe); @@ -936,7 +935,7 @@ qla2x00_beacon_blink(struct scsi_qla_host *ha) /* Set the modified gpio_data values */ if (ha->pio_address) { - WRT_REG_WORD_PIO(®->gpiod, gpio_data); + WRT_REG_WORD_PIO(PIO_REG(ha, gpiod), gpio_data); } else { WRT_REG_WORD(®->gpiod, gpio_data); RD_REG_WORD(®->gpiod); @@ -962,14 +961,11 @@ qla2x00_beacon_on(struct scsi_qla_host *ha) return QLA_FUNCTION_FAILED; } - if (ha->pio_address) - reg = (struct device_reg_2xxx __iomem *)ha->pio_address; - /* Turn off LEDs. */ spin_lock_irqsave(&ha->hardware_lock, flags); if (ha->pio_address) { - gpio_enable = RD_REG_WORD_PIO(®->gpioe); - gpio_data = RD_REG_WORD_PIO(®->gpiod); + gpio_enable = RD_REG_WORD_PIO(PIO_REG(ha, gpioe)); + gpio_data = RD_REG_WORD_PIO(PIO_REG(ha, gpiod)); } else { gpio_enable = RD_REG_WORD(®->gpioe); gpio_data = RD_REG_WORD(®->gpiod); @@ -978,7 +974,7 @@ qla2x00_beacon_on(struct scsi_qla_host *ha) /* Set the modified gpio_enable values. */ if (ha->pio_address) { - WRT_REG_WORD_PIO(®->gpioe, gpio_enable); + WRT_REG_WORD_PIO(PIO_REG(ha, gpioe), gpio_enable); } else { WRT_REG_WORD(®->gpioe, gpio_enable); RD_REG_WORD(®->gpioe); @@ -987,7 +983,7 @@ qla2x00_beacon_on(struct scsi_qla_host *ha) /* Clear out previously set LED colour. */ gpio_data &= ~GPIO_LED_MASK; if (ha->pio_address) { - WRT_REG_WORD_PIO(®->gpiod, gpio_data); + WRT_REG_WORD_PIO(PIO_REG(ha, gpiod), gpio_data); } else { WRT_REG_WORD(®->gpiod, gpio_data); RD_REG_WORD(®->gpiod); @@ -1244,13 +1240,12 @@ qla2x00_read_flash_byte(scsi_qla_host_t *ha, uint32_t addr) if (ha->pio_address) { uint16_t data2; - reg = (struct device_reg_2xxx __iomem *)ha->pio_address; - WRT_REG_WORD_PIO(®->flash_address, (uint16_t)addr); + WRT_REG_WORD_PIO(PIO_REG(ha, flash_address), (uint16_t)addr); do { - data = RD_REG_WORD_PIO(®->flash_data); + data = RD_REG_WORD_PIO(PIO_REG(ha, flash_data)); barrier(); cpu_relax(); - data2 = RD_REG_WORD_PIO(®->flash_data); + data2 = RD_REG_WORD_PIO(PIO_REG(ha, flash_data)); } while (data != data2); } else { WRT_REG_WORD(®->flash_address, (uint16_t)addr); @@ -1304,9 +1299,8 @@ qla2x00_write_flash_byte(scsi_qla_host_t *ha, uint32_t addr, uint8_t data) /* Always perform IO mapped accesses to the FLASH registers. */ if (ha->pio_address) { - reg = (struct device_reg_2xxx __iomem *)ha->pio_address; - WRT_REG_WORD_PIO(®->flash_address, (uint16_t)addr); - WRT_REG_WORD_PIO(®->flash_data, (uint16_t)data); + WRT_REG_WORD_PIO(PIO_REG(ha, flash_address), (uint16_t)addr); + WRT_REG_WORD_PIO(PIO_REG(ha, flash_data), (uint16_t)data); } else { WRT_REG_WORD(®->flash_address, (uint16_t)addr); RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 2c2f6b4697c..c5742cc15ab 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.02.00-k7" +#define QLA2XXX_VERSION "8.02.00-k8" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 2 diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 49925f92555..10b3b9a620f 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -1306,6 +1306,7 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, atomic_set(&ddb_entry->relogin_timer, 0); clear_bit(DF_RELOGIN, &ddb_entry->flags); clear_bit(DF_NO_RELOGIN, &ddb_entry->flags); + iscsi_unblock_session(ddb_entry->sess); iscsi_session_event(ddb_entry->sess, ISCSI_KEVENT_CREATE_SESSION); /* diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 2e2b9fedffc..c3c59d76303 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -63,8 +63,6 @@ static int qla4xxx_sess_get_param(struct iscsi_cls_session *sess, enum iscsi_param param, char *buf); static int qla4xxx_host_get_param(struct Scsi_Host *shost, enum iscsi_host_param param, char *buf); -static void qla4xxx_conn_stop(struct iscsi_cls_conn *conn, int flag); -static int qla4xxx_conn_start(struct iscsi_cls_conn *conn); static void qla4xxx_recovery_timedout(struct iscsi_cls_session *session); /* @@ -91,6 +89,8 @@ static struct scsi_host_template qla4xxx_driver_template = { .slave_alloc = qla4xxx_slave_alloc, .slave_destroy = qla4xxx_slave_destroy, + .scan_finished = iscsi_scan_finished, + .this_id = -1, .cmd_per_lun = 3, .use_clustering = ENABLE_CLUSTERING, @@ -116,8 +116,6 @@ static struct iscsi_transport qla4xxx_iscsi_transport = { .get_conn_param = qla4xxx_conn_get_param, .get_session_param = qla4xxx_sess_get_param, .get_host_param = qla4xxx_host_get_param, - .start_conn = qla4xxx_conn_start, - .stop_conn = qla4xxx_conn_stop, .session_recovery_timedout = qla4xxx_recovery_timedout, }; @@ -128,48 +126,19 @@ static void qla4xxx_recovery_timedout(struct iscsi_cls_session *session) struct ddb_entry *ddb_entry = session->dd_data; struct scsi_qla_host *ha = ddb_entry->ha; - DEBUG2(printk("scsi%ld: %s: index [%d] port down retry count of (%d) " - "secs exhausted, marking device DEAD.\n", ha->host_no, - __func__, ddb_entry->fw_ddb_index, - ha->port_down_retry_count)); - - atomic_set(&ddb_entry->state, DDB_STATE_DEAD); - - DEBUG2(printk("scsi%ld: %s: scheduling dpc routine - dpc flags = " - "0x%lx\n", ha->host_no, __func__, ha->dpc_flags)); - queue_work(ha->dpc_thread, &ha->dpc_work); -} - -static int qla4xxx_conn_start(struct iscsi_cls_conn *conn) -{ - struct iscsi_cls_session *session; - struct ddb_entry *ddb_entry; - - session = iscsi_dev_to_session(conn->dev.parent); - ddb_entry = session->dd_data; - - DEBUG2(printk("scsi%ld: %s: index [%d] starting conn\n", - ddb_entry->ha->host_no, __func__, - ddb_entry->fw_ddb_index)); - iscsi_unblock_session(session); - return 0; -} - -static void qla4xxx_conn_stop(struct iscsi_cls_conn *conn, int flag) -{ - struct iscsi_cls_session *session; - struct ddb_entry *ddb_entry; + if (atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE) { + atomic_set(&ddb_entry->state, DDB_STATE_DEAD); - session = iscsi_dev_to_session(conn->dev.parent); - ddb_entry = session->dd_data; + DEBUG2(printk("scsi%ld: %s: index [%d] port down retry count " + "of (%d) secs exhausted, marking device DEAD.\n", + ha->host_no, __func__, ddb_entry->fw_ddb_index, + ha->port_down_retry_count)); - DEBUG2(printk("scsi%ld: %s: index [%d] stopping conn\n", - ddb_entry->ha->host_no, __func__, - ddb_entry->fw_ddb_index)); - if (flag == STOP_CONN_RECOVER) - iscsi_block_session(session); - else - printk(KERN_ERR "iscsi: invalid stop flag %d\n", flag); + DEBUG2(printk("scsi%ld: %s: scheduling dpc routine - dpc " + "flags = 0x%lx\n", + ha->host_no, __func__, ha->dpc_flags)); + queue_work(ha->dpc_thread, &ha->dpc_work); + } } static int qla4xxx_host_get_param(struct Scsi_Host *shost, @@ -308,6 +277,9 @@ int qla4xxx_add_sess(struct ddb_entry *ddb_entry) DEBUG2(printk(KERN_ERR "Could not add connection.\n")); return -ENOMEM; } + + /* finally ready to go */ + iscsi_unblock_session(ddb_entry->sess); return 0; } @@ -364,6 +336,7 @@ void qla4xxx_mark_device_missing(struct scsi_qla_host *ha, DEBUG3(printk("scsi%d:%d:%d: index [%d] marked MISSING\n", ha->host_no, ddb_entry->bus, ddb_entry->target, ddb_entry->fw_ddb_index)); + iscsi_block_session(ddb_entry->sess); iscsi_conn_error(ddb_entry->conn, ISCSI_ERR_CONN_FAILED); } @@ -430,9 +403,21 @@ static int qla4xxx_queuecommand(struct scsi_cmnd *cmd, { struct scsi_qla_host *ha = to_qla_host(cmd->device->host); struct ddb_entry *ddb_entry = cmd->device->hostdata; + struct iscsi_cls_session *sess = ddb_entry->sess; struct srb *srb; int rval; + if (!sess) { + cmd->result = DID_IMM_RETRY << 16; + goto qc_fail_command; + } + + rval = iscsi_session_chkready(sess); + if (rval) { + cmd->result = rval; + goto qc_fail_command; + } + if (atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE) { if (atomic_read(&ddb_entry->state) == DDB_STATE_DEAD) { cmd->result = DID_NO_CONNECT << 16; @@ -1323,7 +1308,7 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev, qla4xxx_version_str, ha->pdev->device, pci_name(ha->pdev), ha->host_no, ha->firmware_version[0], ha->firmware_version[1], ha->patch_number, ha->build_number); - + scsi_scan_host(host); return 0; remove_host: diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index b35d19472ca..fecba05b4e7 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -969,9 +969,10 @@ void starget_for_each_device(struct scsi_target *starget, void *data, EXPORT_SYMBOL(starget_for_each_device); /** - * __starget_for_each_device - helper to walk all devices of a target - * (UNLOCKED) + * __starget_for_each_device - helper to walk all devices of a target (UNLOCKED) * @starget: target whose devices we want to iterate over. + * @data: parameter for callback @fn() + * @fn: callback function that is invoked for each device * * This traverses over each device of @starget. It does _not_ * take a reference on the scsi_device, so the whole loop must be diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index f243fc30c90..135c1d05470 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -301,7 +301,6 @@ static int scsi_req_map_sg(struct request *rq, struct scatterlist *sgl, page = sg_page(sg); off = sg->offset; len = sg->length; - data_len += len; while (len > 0 && data_len > 0) { /* diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 0d7b4e79415..fac7534f3ec 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -30,10 +30,10 @@ #include <scsi/scsi_transport_iscsi.h> #include <scsi/iscsi_if.h> -#define ISCSI_SESSION_ATTRS 18 -#define ISCSI_CONN_ATTRS 11 +#define ISCSI_SESSION_ATTRS 19 +#define ISCSI_CONN_ATTRS 13 #define ISCSI_HOST_ATTRS 4 -#define ISCSI_TRANSPORT_VERSION "2.0-867" +#define ISCSI_TRANSPORT_VERSION "2.0-868" struct iscsi_internal { int daemon_pid; @@ -127,12 +127,13 @@ static int iscsi_setup_host(struct transport_container *tc, struct device *dev, memset(ihost, 0, sizeof(*ihost)); INIT_LIST_HEAD(&ihost->sessions); mutex_init(&ihost->mutex); + atomic_set(&ihost->nr_scans, 0); - snprintf(ihost->unbind_workq_name, KOBJ_NAME_LEN, "iscsi_unbind_%d", + snprintf(ihost->scan_workq_name, KOBJ_NAME_LEN, "iscsi_scan_%d", shost->host_no); - ihost->unbind_workq = create_singlethread_workqueue( - ihost->unbind_workq_name); - if (!ihost->unbind_workq) + ihost->scan_workq = create_singlethread_workqueue( + ihost->scan_workq_name); + if (!ihost->scan_workq) return -ENOMEM; return 0; } @@ -143,7 +144,7 @@ static int iscsi_remove_host(struct transport_container *tc, struct device *dev, struct Scsi_Host *shost = dev_to_shost(dev); struct iscsi_host *ihost = shost->shost_data; - destroy_workqueue(ihost->unbind_workq); + destroy_workqueue(ihost->scan_workq); return 0; } @@ -221,6 +222,54 @@ static struct iscsi_cls_conn *iscsi_conn_lookup(uint32_t sid, uint32_t cid) * The following functions can be used by LLDs that allocate * their own scsi_hosts or by software iscsi LLDs */ +static struct { + int value; + char *name; +} iscsi_session_state_names[] = { + { ISCSI_SESSION_LOGGED_IN, "LOGGED_IN" }, + { ISCSI_SESSION_FAILED, "FAILED" }, + { ISCSI_SESSION_FREE, "FREE" }, +}; + +const char *iscsi_session_state_name(int state) +{ + int i; + char *name = NULL; + + for (i = 0; i < ARRAY_SIZE(iscsi_session_state_names); i++) { + if (iscsi_session_state_names[i].value == state) { + name = iscsi_session_state_names[i].name; + break; + } + } + return name; +} + +int iscsi_session_chkready(struct iscsi_cls_session *session) +{ + unsigned long flags; + int err; + + spin_lock_irqsave(&session->lock, flags); + switch (session->state) { + case ISCSI_SESSION_LOGGED_IN: + err = 0; + break; + case ISCSI_SESSION_FAILED: + err = DID_IMM_RETRY << 16; + break; + case ISCSI_SESSION_FREE: + err = DID_NO_CONNECT << 16; + break; + default: + err = DID_NO_CONNECT << 16; + break; + } + spin_unlock_irqrestore(&session->lock, flags); + return err; +} +EXPORT_SYMBOL_GPL(iscsi_session_chkready); + static void iscsi_session_release(struct device *dev) { struct iscsi_cls_session *session = iscsi_dev_to_session(dev); @@ -236,6 +285,25 @@ static int iscsi_is_session_dev(const struct device *dev) return dev->release == iscsi_session_release; } +/** + * iscsi_scan_finished - helper to report when running scans are done + * @shost: scsi host + * @time: scan run time + * + * This function can be used by drives like qla4xxx to report to the scsi + * layer when the scans it kicked off at module load time are done. + */ +int iscsi_scan_finished(struct Scsi_Host *shost, unsigned long time) +{ + struct iscsi_host *ihost = shost->shost_data; + /* + * qla4xxx will have kicked off some session unblocks before calling + * scsi_scan_host, so just wait for them to complete. + */ + return !atomic_read(&ihost->nr_scans); +} +EXPORT_SYMBOL_GPL(iscsi_scan_finished); + static int iscsi_user_scan(struct Scsi_Host *shost, uint channel, uint id, uint lun) { @@ -254,14 +322,50 @@ static int iscsi_user_scan(struct Scsi_Host *shost, uint channel, return 0; } +static void iscsi_scan_session(struct work_struct *work) +{ + struct iscsi_cls_session *session = + container_of(work, struct iscsi_cls_session, scan_work); + struct Scsi_Host *shost = iscsi_session_to_shost(session); + struct iscsi_host *ihost = shost->shost_data; + unsigned long flags; + + spin_lock_irqsave(&session->lock, flags); + if (session->state != ISCSI_SESSION_LOGGED_IN) { + spin_unlock_irqrestore(&session->lock, flags); + goto done; + } + spin_unlock_irqrestore(&session->lock, flags); + + scsi_scan_target(&session->dev, 0, session->target_id, + SCAN_WILD_CARD, 1); +done: + atomic_dec(&ihost->nr_scans); +} + static void session_recovery_timedout(struct work_struct *work) { struct iscsi_cls_session *session = container_of(work, struct iscsi_cls_session, recovery_work.work); + unsigned long flags; + + iscsi_cls_session_printk(KERN_INFO, session, + "session recovery timed out after %d secs\n", + session->recovery_tmo); - dev_printk(KERN_INFO, &session->dev, "iscsi: session recovery timed " - "out after %d secs\n", session->recovery_tmo); + spin_lock_irqsave(&session->lock, flags); + switch (session->state) { + case ISCSI_SESSION_FAILED: + session->state = ISCSI_SESSION_FREE; + break; + case ISCSI_SESSION_LOGGED_IN: + case ISCSI_SESSION_FREE: + /* we raced with the unblock's flush */ + spin_unlock_irqrestore(&session->lock, flags); + return; + } + spin_unlock_irqrestore(&session->lock, flags); if (session->transport->session_recovery_timedout) session->transport->session_recovery_timedout(session); @@ -269,16 +373,44 @@ static void session_recovery_timedout(struct work_struct *work) scsi_target_unblock(&session->dev); } -void iscsi_unblock_session(struct iscsi_cls_session *session) +void __iscsi_unblock_session(struct iscsi_cls_session *session) { if (!cancel_delayed_work(&session->recovery_work)) flush_workqueue(iscsi_eh_timer_workq); scsi_target_unblock(&session->dev); } + +void iscsi_unblock_session(struct iscsi_cls_session *session) +{ + struct Scsi_Host *shost = iscsi_session_to_shost(session); + struct iscsi_host *ihost = shost->shost_data; + unsigned long flags; + + spin_lock_irqsave(&session->lock, flags); + session->state = ISCSI_SESSION_LOGGED_IN; + spin_unlock_irqrestore(&session->lock, flags); + + __iscsi_unblock_session(session); + /* + * Only do kernel scanning if the driver is properly hooked into + * the async scanning code (drivers like iscsi_tcp do login and + * scanning from userspace). + */ + if (shost->hostt->scan_finished) { + if (queue_work(ihost->scan_workq, &session->scan_work)) + atomic_inc(&ihost->nr_scans); + } +} EXPORT_SYMBOL_GPL(iscsi_unblock_session); void iscsi_block_session(struct iscsi_cls_session *session) { + unsigned long flags; + + spin_lock_irqsave(&session->lock, flags); + session->state = ISCSI_SESSION_FAILED; + spin_unlock_irqrestore(&session->lock, flags); + scsi_target_block(&session->dev); queue_delayed_work(iscsi_eh_timer_workq, &session->recovery_work, session->recovery_tmo * HZ); @@ -311,7 +443,7 @@ static int iscsi_unbind_session(struct iscsi_cls_session *session) struct Scsi_Host *shost = iscsi_session_to_shost(session); struct iscsi_host *ihost = shost->shost_data; - return queue_work(ihost->unbind_workq, &session->unbind_work); + return queue_work(ihost->scan_workq, &session->unbind_work); } struct iscsi_cls_session * @@ -327,10 +459,13 @@ iscsi_alloc_session(struct Scsi_Host *shost, session->transport = transport; session->recovery_tmo = 120; + session->state = ISCSI_SESSION_FREE; INIT_DELAYED_WORK(&session->recovery_work, session_recovery_timedout); INIT_LIST_HEAD(&session->host_list); INIT_LIST_HEAD(&session->sess_list); INIT_WORK(&session->unbind_work, __iscsi_unbind_session); + INIT_WORK(&session->scan_work, iscsi_scan_session); + spin_lock_init(&session->lock); /* this is released in the dev's release function */ scsi_host_get(shost); @@ -358,8 +493,8 @@ int iscsi_add_session(struct iscsi_cls_session *session, unsigned int target_id) session->sid); err = device_add(&session->dev); if (err) { - dev_printk(KERN_ERR, &session->dev, "iscsi: could not " - "register session's dev\n"); + iscsi_cls_session_printk(KERN_ERR, session, + "could not register session's dev\n"); goto release_host; } transport_register_device(&session->dev); @@ -444,22 +579,28 @@ void iscsi_remove_session(struct iscsi_cls_session *session) * If we are blocked let commands flow again. The lld or iscsi * layer should set up the queuecommand to fail commands. */ - iscsi_unblock_session(session); - iscsi_unbind_session(session); + spin_lock_irqsave(&session->lock, flags); + session->state = ISCSI_SESSION_FREE; + spin_unlock_irqrestore(&session->lock, flags); + __iscsi_unblock_session(session); + __iscsi_unbind_session(&session->unbind_work); + + /* flush running scans */ + flush_workqueue(ihost->scan_workq); /* * If the session dropped while removing devices then we need to make * sure it is not blocked */ if (!cancel_delayed_work(&session->recovery_work)) flush_workqueue(iscsi_eh_timer_workq); - flush_workqueue(ihost->unbind_workq); /* hw iscsi may not have removed all connections from session */ err = device_for_each_child(&session->dev, NULL, iscsi_iter_destroy_conn_fn); if (err) - dev_printk(KERN_ERR, &session->dev, "iscsi: Could not delete " - "all connections for session. Error %d.\n", err); + iscsi_cls_session_printk(KERN_ERR, session, + "Could not delete all connections " + "for session. Error %d.\n", err); transport_unregister_device(&session->dev); device_del(&session->dev); @@ -531,8 +672,8 @@ iscsi_create_conn(struct iscsi_cls_session *session, uint32_t cid) conn->dev.release = iscsi_conn_release; err = device_register(&conn->dev); if (err) { - dev_printk(KERN_ERR, &conn->dev, "iscsi: could not register " - "connection's dev\n"); + iscsi_cls_session_printk(KERN_ERR, session, "could not " + "register connection's dev\n"); goto release_parent_ref; } transport_register_device(&conn->dev); @@ -639,8 +780,8 @@ int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr, skb = alloc_skb(len, GFP_ATOMIC); if (!skb) { iscsi_conn_error(conn, ISCSI_ERR_CONN_FAILED); - dev_printk(KERN_ERR, &conn->dev, "iscsi: can not deliver " - "control PDU: OOM\n"); + iscsi_cls_conn_printk(KERN_ERR, conn, "can not deliver " + "control PDU: OOM\n"); return -ENOMEM; } @@ -661,20 +802,27 @@ EXPORT_SYMBOL_GPL(iscsi_recv_pdu); void iscsi_conn_error(struct iscsi_cls_conn *conn, enum iscsi_err error) { + struct iscsi_cls_session *session = iscsi_conn_to_session(conn); struct nlmsghdr *nlh; struct sk_buff *skb; struct iscsi_uevent *ev; struct iscsi_internal *priv; int len = NLMSG_SPACE(sizeof(*ev)); + unsigned long flags; priv = iscsi_if_transport_lookup(conn->transport); if (!priv) return; + spin_lock_irqsave(&session->lock, flags); + if (session->state == ISCSI_SESSION_LOGGED_IN) + session->state = ISCSI_SESSION_FAILED; + spin_unlock_irqrestore(&session->lock, flags); + skb = alloc_skb(len, GFP_ATOMIC); if (!skb) { - dev_printk(KERN_ERR, &conn->dev, "iscsi: gracefully ignored " - "conn error (%d)\n", error); + iscsi_cls_conn_printk(KERN_ERR, conn, "gracefully ignored " + "conn error (%d)\n", error); return; } @@ -688,8 +836,8 @@ void iscsi_conn_error(struct iscsi_cls_conn *conn, enum iscsi_err error) iscsi_broadcast_skb(skb, GFP_ATOMIC); - dev_printk(KERN_INFO, &conn->dev, "iscsi: detected conn error (%d)\n", - error); + iscsi_cls_conn_printk(KERN_INFO, conn, "detected conn error (%d)\n", + error); } EXPORT_SYMBOL_GPL(iscsi_conn_error); @@ -744,8 +892,8 @@ iscsi_if_get_stats(struct iscsi_transport *transport, struct nlmsghdr *nlh) skbstat = alloc_skb(len, GFP_ATOMIC); if (!skbstat) { - dev_printk(KERN_ERR, &conn->dev, "iscsi: can not " - "deliver stats: OOM\n"); + iscsi_cls_conn_printk(KERN_ERR, conn, "can not " + "deliver stats: OOM\n"); return -ENOMEM; } @@ -801,8 +949,9 @@ int iscsi_session_event(struct iscsi_cls_session *session, skb = alloc_skb(len, GFP_KERNEL); if (!skb) { - dev_printk(KERN_ERR, &session->dev, "Cannot notify userspace " - "of session event %u\n", event); + iscsi_cls_session_printk(KERN_ERR, session, + "Cannot notify userspace of session " + "event %u\n", event); return -ENOMEM; } @@ -825,8 +974,8 @@ int iscsi_session_event(struct iscsi_cls_session *session, ev->r.unbind_session.sid = session->sid; break; default: - dev_printk(KERN_ERR, &session->dev, "Invalid event %u.\n", - event); + iscsi_cls_session_printk(KERN_ERR, session, "Invalid event " + "%u.\n", event); kfree_skb(skb); return -EINVAL; } @@ -837,8 +986,10 @@ int iscsi_session_event(struct iscsi_cls_session *session, */ rc = iscsi_broadcast_skb(skb, GFP_KERNEL); if (rc < 0) - dev_printk(KERN_ERR, &session->dev, "Cannot notify userspace " - "of session event %u. Check iscsi daemon\n", event); + iscsi_cls_session_printk(KERN_ERR, session, + "Cannot notify userspace of session " + "event %u. Check iscsi daemon\n", + event); return rc; } EXPORT_SYMBOL_GPL(iscsi_session_event); @@ -871,16 +1022,15 @@ iscsi_if_create_conn(struct iscsi_transport *transport, struct iscsi_uevent *ev) session = iscsi_session_lookup(ev->u.c_conn.sid); if (!session) { - printk(KERN_ERR "iscsi: invalid session %d\n", + printk(KERN_ERR "iscsi: invalid session %d.\n", ev->u.c_conn.sid); return -EINVAL; } conn = transport->create_conn(session, ev->u.c_conn.cid); if (!conn) { - printk(KERN_ERR "iscsi: couldn't create a new " - "connection for session %d\n", - session->sid); + iscsi_cls_session_printk(KERN_ERR, session, + "couldn't create a new connection."); return -ENOMEM; } @@ -1246,6 +1396,15 @@ iscsi_session_attr(fast_abort, ISCSI_PARAM_FAST_ABORT, 0); iscsi_session_attr(abort_tmo, ISCSI_PARAM_ABORT_TMO, 0); iscsi_session_attr(lu_reset_tmo, ISCSI_PARAM_LU_RESET_TMO, 0); +static ssize_t +show_priv_session_state(struct class_device *cdev, char *buf) +{ + struct iscsi_cls_session *session = iscsi_cdev_to_session(cdev); + return sprintf(buf, "%s\n", iscsi_session_state_name(session->state)); +} +static ISCSI_CLASS_ATTR(priv_sess, state, S_IRUGO, show_priv_session_state, + NULL); + #define iscsi_priv_session_attr_show(field, format) \ static ssize_t \ show_priv_session_##field(struct class_device *cdev, char *buf) \ @@ -1472,6 +1631,7 @@ iscsi_register_transport(struct iscsi_transport *tt) SETUP_SESSION_RD_ATTR(abort_tmo, ISCSI_ABORT_TMO); SETUP_SESSION_RD_ATTR(lu_reset_tmo,ISCSI_LU_RESET_TMO); SETUP_PRIV_SESSION_RD_ATTR(recovery_tmo); + SETUP_PRIV_SESSION_RD_ATTR(state); BUG_ON(count > ISCSI_SESSION_ATTRS); priv->session_attrs[count] = NULL; diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 51a5557f42d..37df8bbe7f4 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -929,6 +929,7 @@ static int sd_done(struct scsi_cmnd *SCpnt) unsigned int xfer_size = scsi_bufflen(SCpnt); unsigned int good_bytes = result ? 0 : xfer_size; u64 start_lba = SCpnt->request->sector; + u64 end_lba = SCpnt->request->sector + (xfer_size / 512); u64 bad_lba; struct scsi_sense_hdr sshdr; int sense_valid = 0; @@ -967,26 +968,23 @@ static int sd_done(struct scsi_cmnd *SCpnt) goto out; if (xfer_size <= SCpnt->device->sector_size) goto out; - switch (SCpnt->device->sector_size) { - case 256: + if (SCpnt->device->sector_size < 512) { + /* only legitimate sector_size here is 256 */ start_lba <<= 1; - break; - case 512: - break; - case 1024: - start_lba >>= 1; - break; - case 2048: - start_lba >>= 2; - break; - case 4096: - start_lba >>= 3; - break; - default: - /* Print something here with limiting frequency. */ - goto out; - break; + end_lba <<= 1; + } else { + /* be careful ... don't want any overflows */ + u64 factor = SCpnt->device->sector_size / 512; + do_div(start_lba, factor); + do_div(end_lba, factor); } + + if (bad_lba < start_lba || bad_lba >= end_lba) + /* the bad lba was reported incorrectly, we have + * no idea where the error is + */ + goto out; + /* This computation should always be done in terms of * the resolution of the device's medium. */ diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c new file mode 100644 index 00000000000..2a6e4f472ea --- /dev/null +++ b/drivers/scsi/ses.c @@ -0,0 +1,689 @@ +/* + * SCSI Enclosure Services + * + * Copyright (C) 2008 James Bottomley <James.Bottomley@HansenPartnership.com> + * +**----------------------------------------------------------------------------- +** +** This program is free software; you can redistribute it and/or +** modify it under the terms of the GNU General Public License +** version 2 as published by the Free Software Foundation. +** +** This program is distributed in the hope that it will be useful, +** but WITHOUT ANY WARRANTY; without even the implied warranty of +** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +** GNU General Public License for more details. +** +** You should have received a copy of the GNU General Public License +** along with this program; if not, write to the Free Software +** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +**----------------------------------------------------------------------------- +*/ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/enclosure.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_dbg.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_driver.h> +#include <scsi/scsi_host.h> + +struct ses_device { + char *page1; + char *page2; + char *page10; + short page1_len; + short page2_len; + short page10_len; +}; + +struct ses_component { + u64 addr; + unsigned char *desc; +}; + +static int ses_probe(struct device *dev) +{ + struct scsi_device *sdev = to_scsi_device(dev); + int err = -ENODEV; + + if (sdev->type != TYPE_ENCLOSURE) + goto out; + + err = 0; + sdev_printk(KERN_NOTICE, sdev, "Attached Enclosure device\n"); + + out: + return err; +} + +#define SES_TIMEOUT 30 +#define SES_RETRIES 3 + +static int ses_recv_diag(struct scsi_device *sdev, int page_code, + void *buf, int bufflen) +{ + char cmd[] = { + RECEIVE_DIAGNOSTIC, + 1, /* Set PCV bit */ + page_code, + bufflen >> 8, + bufflen & 0xff, + 0 + }; + + return scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen, + NULL, SES_TIMEOUT, SES_RETRIES); +} + +static int ses_send_diag(struct scsi_device *sdev, int page_code, + void *buf, int bufflen) +{ + u32 result; + + char cmd[] = { + SEND_DIAGNOSTIC, + 0x10, /* Set PF bit */ + 0, + bufflen >> 8, + bufflen & 0xff, + 0 + }; + + result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, buf, bufflen, + NULL, SES_TIMEOUT, SES_RETRIES); + if (result) + sdev_printk(KERN_ERR, sdev, "SEND DIAGNOSTIC result: %8x\n", + result); + return result; +} + +static int ses_set_page2_descriptor(struct enclosure_device *edev, + struct enclosure_component *ecomp, + char *desc) +{ + int i, j, count = 0, descriptor = ecomp->number; + struct scsi_device *sdev = to_scsi_device(edev->cdev.dev); + struct ses_device *ses_dev = edev->scratch; + char *type_ptr = ses_dev->page1 + 12 + ses_dev->page1[11]; + char *desc_ptr = ses_dev->page2 + 8; + + /* Clear everything */ + memset(desc_ptr, 0, ses_dev->page2_len - 8); + for (i = 0; i < ses_dev->page1[10]; i++, type_ptr += 4) { + for (j = 0; j < type_ptr[1]; j++) { + desc_ptr += 4; + if (type_ptr[0] != ENCLOSURE_COMPONENT_DEVICE && + type_ptr[0] != ENCLOSURE_COMPONENT_ARRAY_DEVICE) + continue; + if (count++ == descriptor) { + memcpy(desc_ptr, desc, 4); + /* set select */ + desc_ptr[0] |= 0x80; + /* clear reserved, just in case */ + desc_ptr[0] &= 0xf0; + } + } + } + + return ses_send_diag(sdev, 2, ses_dev->page2, ses_dev->page2_len); +} + +static char *ses_get_page2_descriptor(struct enclosure_device *edev, + struct enclosure_component *ecomp) +{ + int i, j, count = 0, descriptor = ecomp->number; + struct scsi_device *sdev = to_scsi_device(edev->cdev.dev); + struct ses_device *ses_dev = edev->scratch; + char *type_ptr = ses_dev->page1 + 12 + ses_dev->page1[11]; + char *desc_ptr = ses_dev->page2 + 8; + + ses_recv_diag(sdev, 2, ses_dev->page2, ses_dev->page2_len); + + for (i = 0; i < ses_dev->page1[10]; i++, type_ptr += 4) { + for (j = 0; j < type_ptr[1]; j++) { + desc_ptr += 4; + if (type_ptr[0] != ENCLOSURE_COMPONENT_DEVICE && + type_ptr[0] != ENCLOSURE_COMPONENT_ARRAY_DEVICE) + continue; + if (count++ == descriptor) + return desc_ptr; + } + } + return NULL; +} + +static void ses_get_fault(struct enclosure_device *edev, + struct enclosure_component *ecomp) +{ + char *desc; + + desc = ses_get_page2_descriptor(edev, ecomp); + ecomp->fault = (desc[3] & 0x60) >> 4; +} + +static int ses_set_fault(struct enclosure_device *edev, + struct enclosure_component *ecomp, + enum enclosure_component_setting val) +{ + char desc[4] = {0 }; + + switch (val) { + case ENCLOSURE_SETTING_DISABLED: + /* zero is disabled */ + break; + case ENCLOSURE_SETTING_ENABLED: + desc[2] = 0x02; + break; + default: + /* SES doesn't do the SGPIO blink settings */ + return -EINVAL; + } + + return ses_set_page2_descriptor(edev, ecomp, desc); +} + +static void ses_get_status(struct enclosure_device *edev, + struct enclosure_component *ecomp) +{ + char *desc; + + desc = ses_get_page2_descriptor(edev, ecomp); + ecomp->status = (desc[0] & 0x0f); +} + +static void ses_get_locate(struct enclosure_device *edev, + struct enclosure_component *ecomp) +{ + char *desc; + + desc = ses_get_page2_descriptor(edev, ecomp); + ecomp->locate = (desc[2] & 0x02) ? 1 : 0; +} + +static int ses_set_locate(struct enclosure_device *edev, + struct enclosure_component *ecomp, + enum enclosure_component_setting val) +{ + char desc[4] = {0 }; + + switch (val) { + case ENCLOSURE_SETTING_DISABLED: + /* zero is disabled */ + break; + case ENCLOSURE_SETTING_ENABLED: + desc[2] = 0x02; + break; + default: + /* SES doesn't do the SGPIO blink settings */ + return -EINVAL; + } + return ses_set_page2_descriptor(edev, ecomp, desc); +} + +static int ses_set_active(struct enclosure_device *edev, + struct enclosure_component *ecomp, + enum enclosure_component_setting val) +{ + char desc[4] = {0 }; + + switch (val) { + case ENCLOSURE_SETTING_DISABLED: + /* zero is disabled */ + ecomp->active = 0; + break; + case ENCLOSURE_SETTING_ENABLED: + desc[2] = 0x80; + ecomp->active = 1; + break; + default: + /* SES doesn't do the SGPIO blink settings */ + return -EINVAL; + } + return ses_set_page2_descriptor(edev, ecomp, desc); +} + +static struct enclosure_component_callbacks ses_enclosure_callbacks = { + .get_fault = ses_get_fault, + .set_fault = ses_set_fault, + .get_status = ses_get_status, + .get_locate = ses_get_locate, + .set_locate = ses_set_locate, + .set_active = ses_set_active, +}; + +struct ses_host_edev { + struct Scsi_Host *shost; + struct enclosure_device *edev; +}; + +int ses_match_host(struct enclosure_device *edev, void *data) +{ + struct ses_host_edev *sed = data; + struct scsi_device *sdev; + + if (!scsi_is_sdev_device(edev->cdev.dev)) + return 0; + + sdev = to_scsi_device(edev->cdev.dev); + + if (sdev->host != sed->shost) + return 0; + + sed->edev = edev; + return 1; +} + +static void ses_process_descriptor(struct enclosure_component *ecomp, + unsigned char *desc) +{ + int eip = desc[0] & 0x10; + int invalid = desc[0] & 0x80; + enum scsi_protocol proto = desc[0] & 0x0f; + u64 addr = 0; + struct ses_component *scomp = ecomp->scratch; + unsigned char *d; + + scomp->desc = desc; + + if (invalid) + return; + + switch (proto) { + case SCSI_PROTOCOL_SAS: + if (eip) + d = desc + 8; + else + d = desc + 4; + /* only take the phy0 addr */ + addr = (u64)d[12] << 56 | + (u64)d[13] << 48 | + (u64)d[14] << 40 | + (u64)d[15] << 32 | + (u64)d[16] << 24 | + (u64)d[17] << 16 | + (u64)d[18] << 8 | + (u64)d[19]; + break; + default: + /* FIXME: Need to add more protocols than just SAS */ + break; + } + scomp->addr = addr; +} + +struct efd { + u64 addr; + struct device *dev; +}; + +static int ses_enclosure_find_by_addr(struct enclosure_device *edev, + void *data) +{ + struct efd *efd = data; + int i; + struct ses_component *scomp; + + if (!edev->component[0].scratch) + return 0; + + for (i = 0; i < edev->components; i++) { + scomp = edev->component[i].scratch; + if (scomp->addr != efd->addr) + continue; + + enclosure_add_device(edev, i, efd->dev); + return 1; + } + return 0; +} + +#define VPD_INQUIRY_SIZE 512 + +static void ses_match_to_enclosure(struct enclosure_device *edev, + struct scsi_device *sdev) +{ + unsigned char *buf = kmalloc(VPD_INQUIRY_SIZE, GFP_KERNEL); + unsigned char *desc; + int len; + struct efd efd = { + .addr = 0, + }; + unsigned char cmd[] = { + INQUIRY, + 1, + 0x83, + VPD_INQUIRY_SIZE >> 8, + VPD_INQUIRY_SIZE & 0xff, + 0 + }; + + if (!buf) + return; + + if (scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, + VPD_INQUIRY_SIZE, NULL, SES_TIMEOUT, SES_RETRIES)) + goto free; + + len = (buf[2] << 8) + buf[3]; + desc = buf + 4; + while (desc < buf + len) { + enum scsi_protocol proto = desc[0] >> 4; + u8 code_set = desc[0] & 0x0f; + u8 piv = desc[1] & 0x80; + u8 assoc = (desc[1] & 0x30) >> 4; + u8 type = desc[1] & 0x0f; + u8 len = desc[3]; + + if (piv && code_set == 1 && assoc == 1 && code_set == 1 + && proto == SCSI_PROTOCOL_SAS && type == 3 && len == 8) + efd.addr = (u64)desc[4] << 56 | + (u64)desc[5] << 48 | + (u64)desc[6] << 40 | + (u64)desc[7] << 32 | + (u64)desc[8] << 24 | + (u64)desc[9] << 16 | + (u64)desc[10] << 8 | + (u64)desc[11]; + + desc += len + 4; + } + if (!efd.addr) + goto free; + + efd.dev = &sdev->sdev_gendev; + + enclosure_for_each_device(ses_enclosure_find_by_addr, &efd); + free: + kfree(buf); +} + +#define INIT_ALLOC_SIZE 32 + +static int ses_intf_add(struct class_device *cdev, + struct class_interface *intf) +{ + struct scsi_device *sdev = to_scsi_device(cdev->dev); + struct scsi_device *tmp_sdev; + unsigned char *buf = NULL, *hdr_buf, *type_ptr, *desc_ptr, + *addl_desc_ptr; + struct ses_device *ses_dev; + u32 result; + int i, j, types, len, components = 0; + int err = -ENOMEM; + struct enclosure_device *edev; + struct ses_component *scomp; + + if (!scsi_device_enclosure(sdev)) { + /* not an enclosure, but might be in one */ + edev = enclosure_find(&sdev->host->shost_gendev); + if (edev) { + ses_match_to_enclosure(edev, sdev); + class_device_put(&edev->cdev); + } + return -ENODEV; + } + + /* TYPE_ENCLOSURE prints a message in probe */ + if (sdev->type != TYPE_ENCLOSURE) + sdev_printk(KERN_NOTICE, sdev, "Embedded Enclosure Device\n"); + + ses_dev = kzalloc(sizeof(*ses_dev), GFP_KERNEL); + hdr_buf = kzalloc(INIT_ALLOC_SIZE, GFP_KERNEL); + if (!hdr_buf || !ses_dev) + goto err_init_free; + + result = ses_recv_diag(sdev, 1, hdr_buf, INIT_ALLOC_SIZE); + if (result) + goto recv_failed; + + if (hdr_buf[1] != 0) { + /* FIXME: need subenclosure support; I've just never + * seen a device with subenclosures and it makes the + * traversal routines more complex */ + sdev_printk(KERN_ERR, sdev, + "FIXME driver has no support for subenclosures (%d)\n", + buf[1]); + goto err_free; + } + + len = (hdr_buf[2] << 8) + hdr_buf[3] + 4; + buf = kzalloc(len, GFP_KERNEL); + if (!buf) + goto err_free; + + ses_dev->page1 = buf; + ses_dev->page1_len = len; + + result = ses_recv_diag(sdev, 1, buf, len); + if (result) + goto recv_failed; + + types = buf[10]; + len = buf[11]; + + type_ptr = buf + 12 + len; + + for (i = 0; i < types; i++, type_ptr += 4) { + if (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE || + type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE) + components += type_ptr[1]; + } + + result = ses_recv_diag(sdev, 2, hdr_buf, INIT_ALLOC_SIZE); + if (result) + goto recv_failed; + + len = (hdr_buf[2] << 8) + hdr_buf[3] + 4; + buf = kzalloc(len, GFP_KERNEL); + if (!buf) + goto err_free; + + /* make sure getting page 2 actually works */ + result = ses_recv_diag(sdev, 2, buf, len); + if (result) + goto recv_failed; + ses_dev->page2 = buf; + ses_dev->page2_len = len; + + /* The additional information page --- allows us + * to match up the devices */ + result = ses_recv_diag(sdev, 10, hdr_buf, INIT_ALLOC_SIZE); + if (result) + goto no_page10; + + len = (hdr_buf[2] << 8) + hdr_buf[3] + 4; + buf = kzalloc(len, GFP_KERNEL); + if (!buf) + goto err_free; + + result = ses_recv_diag(sdev, 10, buf, len); + if (result) + goto recv_failed; + ses_dev->page10 = buf; + ses_dev->page10_len = len; + + no_page10: + scomp = kmalloc(sizeof(struct ses_component) * components, GFP_KERNEL); + if (!scomp) + goto err_free; + + edev = enclosure_register(cdev->dev, sdev->sdev_gendev.bus_id, + components, &ses_enclosure_callbacks); + if (IS_ERR(edev)) { + err = PTR_ERR(edev); + goto err_free; + } + + edev->scratch = ses_dev; + for (i = 0; i < components; i++) + edev->component[i].scratch = scomp++; + + /* Page 7 for the descriptors is optional */ + buf = NULL; + result = ses_recv_diag(sdev, 7, hdr_buf, INIT_ALLOC_SIZE); + if (result) + goto simple_populate; + + len = (hdr_buf[2] << 8) + hdr_buf[3] + 4; + /* add 1 for trailing '\0' we'll use */ + buf = kzalloc(len + 1, GFP_KERNEL); + result = ses_recv_diag(sdev, 7, buf, len); + if (result) { + simple_populate: + kfree(buf); + buf = NULL; + desc_ptr = NULL; + addl_desc_ptr = NULL; + } else { + desc_ptr = buf + 8; + len = (desc_ptr[2] << 8) + desc_ptr[3]; + /* skip past overall descriptor */ + desc_ptr += len + 4; + addl_desc_ptr = ses_dev->page10 + 8; + } + type_ptr = ses_dev->page1 + 12 + ses_dev->page1[11]; + components = 0; + for (i = 0; i < types; i++, type_ptr += 4) { + for (j = 0; j < type_ptr[1]; j++) { + char *name = NULL; + struct enclosure_component *ecomp; + + if (desc_ptr) { + len = (desc_ptr[2] << 8) + desc_ptr[3]; + desc_ptr += 4; + /* Add trailing zero - pushes into + * reserved space */ + desc_ptr[len] = '\0'; + name = desc_ptr; + } + if (type_ptr[0] != ENCLOSURE_COMPONENT_DEVICE && + type_ptr[0] != ENCLOSURE_COMPONENT_ARRAY_DEVICE) + continue; + ecomp = enclosure_component_register(edev, + components++, + type_ptr[0], + name); + if (desc_ptr) { + desc_ptr += len; + if (!IS_ERR(ecomp)) + ses_process_descriptor(ecomp, + addl_desc_ptr); + + if (addl_desc_ptr) + addl_desc_ptr += addl_desc_ptr[1] + 2; + } + } + } + kfree(buf); + kfree(hdr_buf); + + /* see if there are any devices matching before + * we found the enclosure */ + shost_for_each_device(tmp_sdev, sdev->host) { + if (tmp_sdev->lun != 0 || scsi_device_enclosure(tmp_sdev)) + continue; + ses_match_to_enclosure(edev, tmp_sdev); + } + + return 0; + + recv_failed: + sdev_printk(KERN_ERR, sdev, "Failed to get diagnostic page 0x%x\n", + result); + err = -ENODEV; + err_free: + kfree(buf); + kfree(ses_dev->page10); + kfree(ses_dev->page2); + kfree(ses_dev->page1); + err_init_free: + kfree(ses_dev); + kfree(hdr_buf); + sdev_printk(KERN_ERR, sdev, "Failed to bind enclosure %d\n", err); + return err; +} + +static int ses_remove(struct device *dev) +{ + return 0; +} + +static void ses_intf_remove(struct class_device *cdev, + struct class_interface *intf) +{ + struct scsi_device *sdev = to_scsi_device(cdev->dev); + struct enclosure_device *edev; + struct ses_device *ses_dev; + + if (!scsi_device_enclosure(sdev)) + return; + + edev = enclosure_find(cdev->dev); + if (!edev) + return; + + ses_dev = edev->scratch; + edev->scratch = NULL; + + kfree(ses_dev->page1); + kfree(ses_dev->page2); + kfree(ses_dev); + + kfree(edev->component[0].scratch); + + class_device_put(&edev->cdev); + enclosure_unregister(edev); +} + +static struct class_interface ses_interface = { + .add = ses_intf_add, + .remove = ses_intf_remove, +}; + +static struct scsi_driver ses_template = { + .owner = THIS_MODULE, + .gendrv = { + .name = "ses", + .probe = ses_probe, + .remove = ses_remove, + }, +}; + +static int __init ses_init(void) +{ + int err; + + err = scsi_register_interface(&ses_interface); + if (err) + return err; + + err = scsi_register_driver(&ses_template.gendrv); + if (err) + goto out_unreg; + + return 0; + + out_unreg: + scsi_unregister_interface(&ses_interface); + return err; +} + +static void __exit ses_exit(void) +{ + scsi_unregister_driver(&ses_template.gendrv); + scsi_unregister_interface(&ses_interface); +} + +module_init(ses_init); +module_exit(ses_exit); + +MODULE_ALIAS_SCSI_DEVICE(TYPE_ENCLOSURE); + +MODULE_AUTHOR("James Bottomley"); +MODULE_DESCRIPTION("SCSI Enclosure Services (ses) driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index aba28f335b8..e5156aa6dd2 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -1160,23 +1160,22 @@ sg_fasync(int fd, struct file *filp, int mode) return (retval < 0) ? retval : 0; } -static struct page * -sg_vma_nopage(struct vm_area_struct *vma, unsigned long addr, int *type) +static int +sg_vma_fault(struct vm_area_struct *vma, struct vm_fault *vmf) { Sg_fd *sfp; - struct page *page = NOPAGE_SIGBUS; unsigned long offset, len, sa; Sg_scatter_hold *rsv_schp; struct scatterlist *sg; int k; if ((NULL == vma) || (!(sfp = (Sg_fd *) vma->vm_private_data))) - return page; + return VM_FAULT_SIGBUS; rsv_schp = &sfp->reserve; - offset = addr - vma->vm_start; + offset = vmf->pgoff << PAGE_SHIFT; if (offset >= rsv_schp->bufflen) - return page; - SCSI_LOG_TIMEOUT(3, printk("sg_vma_nopage: offset=%lu, scatg=%d\n", + return VM_FAULT_SIGBUS; + SCSI_LOG_TIMEOUT(3, printk("sg_vma_fault: offset=%lu, scatg=%d\n", offset, rsv_schp->k_use_sg)); sg = rsv_schp->buffer; sa = vma->vm_start; @@ -1185,21 +1184,21 @@ sg_vma_nopage(struct vm_area_struct *vma, unsigned long addr, int *type) len = vma->vm_end - sa; len = (len < sg->length) ? len : sg->length; if (offset < len) { + struct page *page; page = virt_to_page(page_address(sg_page(sg)) + offset); get_page(page); /* increment page count */ - break; + vmf->page = page; + return 0; /* success */ } sa += len; offset -= len; } - if (type) - *type = VM_FAULT_MINOR; - return page; + return VM_FAULT_SIGBUS; } static struct vm_operations_struct sg_mmap_vm_ops = { - .nopage = sg_vma_nopage, + .fault = sg_vma_fault, }; static int diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 50ba4925020..208565bdbe8 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -163,6 +163,29 @@ static void scsi_cd_put(struct scsi_cd *cd) mutex_unlock(&sr_ref_mutex); } +/* identical to scsi_test_unit_ready except that it doesn't + * eat the NOT_READY returns for removable media */ +int sr_test_unit_ready(struct scsi_device *sdev, struct scsi_sense_hdr *sshdr) +{ + int retries = MAX_RETRIES; + int the_result; + u8 cmd[] = {TEST_UNIT_READY, 0, 0, 0, 0, 0 }; + + /* issue TEST_UNIT_READY until the initial startup UNIT_ATTENTION + * conditions are gone, or a timeout happens + */ + do { + the_result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, + 0, sshdr, SR_TIMEOUT, + retries--); + + } while (retries > 0 && + (!scsi_status_is_good(the_result) || + (scsi_sense_valid(sshdr) && + sshdr->sense_key == UNIT_ATTENTION))); + return the_result; +} + /* * This function checks to see if the media has been changed in the * CDROM drive. It is possible that we have already sensed a change, @@ -185,8 +208,7 @@ static int sr_media_change(struct cdrom_device_info *cdi, int slot) } sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL); - retval = scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES, - sshdr); + retval = sr_test_unit_ready(cd->device, sshdr); if (retval || (scsi_sense_valid(sshdr) && /* 0x3a is medium not present */ sshdr->asc == 0x3a)) { @@ -733,10 +755,8 @@ static void get_capabilities(struct scsi_cd *cd) { unsigned char *buffer; struct scsi_mode_data data; - unsigned char cmd[MAX_COMMAND_SIZE]; struct scsi_sense_hdr sshdr; - unsigned int the_result; - int retries, rc, n; + int rc, n; static const char *loadmech[] = { @@ -758,23 +778,8 @@ static void get_capabilities(struct scsi_cd *cd) return; } - /* issue TEST_UNIT_READY until the initial startup UNIT_ATTENTION - * conditions are gone, or a timeout happens - */ - retries = 0; - do { - memset((void *)cmd, 0, MAX_COMMAND_SIZE); - cmd[0] = TEST_UNIT_READY; - - the_result = scsi_execute_req (cd->device, cmd, DMA_NONE, NULL, - 0, &sshdr, SR_TIMEOUT, - MAX_RETRIES); - - retries++; - } while (retries < 5 && - (!scsi_status_is_good(the_result) || - (scsi_sense_valid(&sshdr) && - sshdr.sense_key == UNIT_ATTENTION))); + /* eat unit attentions */ + sr_test_unit_ready(cd->device, &sshdr); /* ask for mode page 0x2a */ rc = scsi_mode_sense(cd->device, 0, 0x2a, buffer, 128, diff --git a/drivers/scsi/sr.h b/drivers/scsi/sr.h index 81fbc0b78a5..1e144dfdbd4 100644 --- a/drivers/scsi/sr.h +++ b/drivers/scsi/sr.h @@ -61,6 +61,7 @@ int sr_select_speed(struct cdrom_device_info *cdi, int speed); int sr_audio_ioctl(struct cdrom_device_info *, unsigned int, void *); int sr_is_xa(Scsi_CD *); +int sr_test_unit_ready(struct scsi_device *sdev, struct scsi_sense_hdr *sshdr); /* sr_vendor.c */ void sr_vendor_init(Scsi_CD *); diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c index d5cebff1d64..ae87d08df58 100644 --- a/drivers/scsi/sr_ioctl.c +++ b/drivers/scsi/sr_ioctl.c @@ -306,8 +306,7 @@ int sr_drive_status(struct cdrom_device_info *cdi, int slot) /* we have no changer support */ return -EINVAL; } - if (0 == scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES, - &sshdr)) + if (0 == sr_test_unit_ready(cd->device, &sshdr)) return CDS_DISC_OK; if (!cdrom_get_media_event(cdi, &med)) { diff --git a/drivers/scsi/sun3x_esp.c b/drivers/scsi/sun3x_esp.c index 1bc41907a03..06152c7fa68 100644 --- a/drivers/scsi/sun3x_esp.c +++ b/drivers/scsi/sun3x_esp.c @@ -1,392 +1,316 @@ -/* sun3x_esp.c: EnhancedScsiProcessor Sun3x SCSI driver code. +/* sun3x_esp.c: ESP front-end for Sun3x systems. * - * (C) 1999 Thomas Bogendoerfer (tsbogend@alpha.franken.de) - * - * Based on David S. Miller's esp driver + * Copyright (C) 2007,2008 Thomas Bogendoerfer (tsbogend@alpha.franken.de) */ #include <linux/kernel.h> #include <linux/types.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/blkdev.h> -#include <linux/proc_fs.h> -#include <linux/stat.h> #include <linux/delay.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> #include <linux/interrupt.h> -#include "scsi.h" -#include <scsi/scsi_host.h> -#include "NCR53C9x.h" - #include <asm/sun3x.h> +#include <asm/io.h> +#include <asm/dma.h> #include <asm/dvma.h> -#include <asm/irq.h> - -static void dma_barrier(struct NCR_ESP *esp); -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count); -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp); -static void dma_drain(struct NCR_ESP *esp); -static void dma_invalidate(struct NCR_ESP *esp); -static void dma_dump_state(struct NCR_ESP *esp); -static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length); -static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length); -static void dma_ints_off(struct NCR_ESP *esp); -static void dma_ints_on(struct NCR_ESP *esp); -static int dma_irq_p(struct NCR_ESP *esp); -static void dma_poll(struct NCR_ESP *esp, unsigned char *vaddr); -static int dma_ports_p(struct NCR_ESP *esp); -static void dma_reset(struct NCR_ESP *esp); -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write); -static void dma_mmu_get_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp); -static void dma_mmu_get_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp); -static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp); -static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp); -static void dma_advance_sg (Scsi_Cmnd *sp); - -/* Detecting ESP chips on the machine. This is the simple and easy - * version. - */ -int sun3x_esp_detect(struct scsi_host_template *tpnt) -{ - struct NCR_ESP *esp; - struct ConfigDev *esp_dev; - - esp_dev = 0; - esp = esp_allocate(tpnt, esp_dev, 0); - - /* Do command transfer with DMA */ - esp->do_pio_cmds = 0; - - /* Required functions */ - esp->dma_bytes_sent = &dma_bytes_sent; - esp->dma_can_transfer = &dma_can_transfer; - esp->dma_dump_state = &dma_dump_state; - esp->dma_init_read = &dma_init_read; - esp->dma_init_write = &dma_init_write; - esp->dma_ints_off = &dma_ints_off; - esp->dma_ints_on = &dma_ints_on; - esp->dma_irq_p = &dma_irq_p; - esp->dma_ports_p = &dma_ports_p; - esp->dma_setup = &dma_setup; - - /* Optional functions */ - esp->dma_barrier = &dma_barrier; - esp->dma_invalidate = &dma_invalidate; - esp->dma_drain = &dma_drain; - esp->dma_irq_entry = 0; - esp->dma_irq_exit = 0; - esp->dma_led_on = 0; - esp->dma_led_off = 0; - esp->dma_poll = &dma_poll; - esp->dma_reset = &dma_reset; - - /* virtual DMA functions */ - esp->dma_mmu_get_scsi_one = &dma_mmu_get_scsi_one; - esp->dma_mmu_get_scsi_sgl = &dma_mmu_get_scsi_sgl; - esp->dma_mmu_release_scsi_one = &dma_mmu_release_scsi_one; - esp->dma_mmu_release_scsi_sgl = &dma_mmu_release_scsi_sgl; - esp->dma_advance_sg = &dma_advance_sg; - - /* SCSI chip speed */ - esp->cfreq = 20000000; - esp->eregs = (struct ESP_regs *)(SUN3X_ESP_BASE); - esp->dregs = (void *)SUN3X_ESP_DMA; - esp->esp_command = (volatile unsigned char *)dvma_malloc(DVMA_PAGE_SIZE); - esp->esp_command_dvma = dvma_vtob((unsigned long)esp->esp_command); - - esp->irq = 2; - if (request_irq(esp->irq, esp_intr, IRQF_DISABLED, - "SUN3X SCSI", esp->ehost)) { - esp_deallocate(esp); - return 0; - } +/* DMA controller reg offsets */ +#define DMA_CSR 0x00UL /* rw DMA control/status register 0x00 */ +#define DMA_ADDR 0x04UL /* rw DMA transfer address register 0x04 */ +#define DMA_COUNT 0x08UL /* rw DMA transfer count register 0x08 */ +#define DMA_TEST 0x0cUL /* rw DMA test/debug register 0x0c */ - esp->scsi_id = 7; - esp->diff = 0; +#include <scsi/scsi_host.h> - esp_initialize(esp); +#include "esp_scsi.h" - /* for reasons beyond my knowledge (and which should likely be fixed) - sync mode doesn't work on a 3/80 at 5mhz. but it does at 4. */ - esp->sync_defp = 0x3f; +#define DRV_MODULE_NAME "sun3x_esp" +#define PFX DRV_MODULE_NAME ": " +#define DRV_VERSION "1.000" +#define DRV_MODULE_RELDATE "Nov 1, 2007" - printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, - esps_in_use); - esps_running = esps_in_use; - return esps_in_use; +/* + * m68k always assumes readl/writel operate on little endian + * mmio space; this is wrong at least for Sun3x, so we + * need to workaround this until a proper way is found + */ +#if 0 +#define dma_read32(REG) \ + readl(esp->dma_regs + (REG)) +#define dma_write32(VAL, REG) \ + writel((VAL), esp->dma_regs + (REG)) +#else +#define dma_read32(REG) \ + *(volatile u32 *)(esp->dma_regs + (REG)) +#define dma_write32(VAL, REG) \ + do { *(volatile u32 *)(esp->dma_regs + (REG)) = (VAL); } while (0) +#endif + +static void sun3x_esp_write8(struct esp *esp, u8 val, unsigned long reg) +{ + writeb(val, esp->regs + (reg * 4UL)); } -static void dma_do_drain(struct NCR_ESP *esp) +static u8 sun3x_esp_read8(struct esp *esp, unsigned long reg) { - struct sparc_dma_registers *dregs = - (struct sparc_dma_registers *) esp->dregs; - - int count = 500000; - - while((dregs->cond_reg & DMA_PEND_READ) && (--count > 0)) - udelay(1); - - if(!count) { - printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg); - } - - dregs->cond_reg |= DMA_FIFO_STDRAIN; - - count = 500000; - - while((dregs->cond_reg & DMA_FIFO_ISDRAIN) && (--count > 0)) - udelay(1); - - if(!count) { - printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg); - } - + return readb(esp->regs + (reg * 4UL)); } - -static void dma_barrier(struct NCR_ESP *esp) + +static dma_addr_t sun3x_esp_map_single(struct esp *esp, void *buf, + size_t sz, int dir) { - struct sparc_dma_registers *dregs = - (struct sparc_dma_registers *) esp->dregs; - int count = 500000; - - while((dregs->cond_reg & DMA_PEND_READ) && (--count > 0)) - udelay(1); - - if(!count) { - printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg); - } - - dregs->cond_reg &= ~(DMA_ENABLE); + return dma_map_single(esp->dev, buf, sz, dir); } -/* This uses various DMA csr fields and the fifo flags count value to - * determine how many bytes were successfully sent/received by the ESP. - */ -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count) +static int sun3x_esp_map_sg(struct esp *esp, struct scatterlist *sg, + int num_sg, int dir) { - struct sparc_dma_registers *dregs = - (struct sparc_dma_registers *) esp->dregs; - - int rval = dregs->st_addr - esp->esp_command_dvma; - - return rval - fifo_count; + return dma_map_sg(esp->dev, sg, num_sg, dir); } -static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp) +static void sun3x_esp_unmap_single(struct esp *esp, dma_addr_t addr, + size_t sz, int dir) { - return sp->SCp.this_residual; + dma_unmap_single(esp->dev, addr, sz, dir); } -static void dma_drain(struct NCR_ESP *esp) +static void sun3x_esp_unmap_sg(struct esp *esp, struct scatterlist *sg, + int num_sg, int dir) { - struct sparc_dma_registers *dregs = - (struct sparc_dma_registers *) esp->dregs; - int count = 500000; - - if(dregs->cond_reg & DMA_FIFO_ISDRAIN) { - dregs->cond_reg |= DMA_FIFO_STDRAIN; - while((dregs->cond_reg & DMA_FIFO_ISDRAIN) && (--count > 0)) - udelay(1); - if(!count) { - printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg); - } - - } + dma_unmap_sg(esp->dev, sg, num_sg, dir); } -static void dma_invalidate(struct NCR_ESP *esp) +static int sun3x_esp_irq_pending(struct esp *esp) { - struct sparc_dma_registers *dregs = - (struct sparc_dma_registers *) esp->dregs; - - __u32 tmp; - int count = 500000; - - while(((tmp = dregs->cond_reg) & DMA_PEND_READ) && (--count > 0)) - udelay(1); + if (dma_read32(DMA_CSR) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)) + return 1; + return 0; +} - if(!count) { - printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg); - } +static void sun3x_esp_reset_dma(struct esp *esp) +{ + u32 val; - dregs->cond_reg = tmp | DMA_FIFO_INV; - dregs->cond_reg &= ~DMA_FIFO_INV; + val = dma_read32(DMA_CSR); + dma_write32(val | DMA_RST_SCSI, DMA_CSR); + dma_write32(val & ~DMA_RST_SCSI, DMA_CSR); + /* Enable interrupts. */ + val = dma_read32(DMA_CSR); + dma_write32(val | DMA_INT_ENAB, DMA_CSR); } -static void dma_dump_state(struct NCR_ESP *esp) +static void sun3x_esp_dma_drain(struct esp *esp) { - struct sparc_dma_registers *dregs = - (struct sparc_dma_registers *) esp->dregs; + u32 csr; + int lim; - ESPLOG(("esp%d: dma -- cond_reg<%08lx> addr<%08lx>\n", - esp->esp_id, dregs->cond_reg, dregs->st_addr)); -} + csr = dma_read32(DMA_CSR); + if (!(csr & DMA_FIFO_ISDRAIN)) + return; -static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length) -{ - struct sparc_dma_registers *dregs = - (struct sparc_dma_registers *) esp->dregs; + dma_write32(csr | DMA_FIFO_STDRAIN, DMA_CSR); - dregs->st_addr = vaddress; - dregs->cond_reg |= (DMA_ST_WRITE | DMA_ENABLE); + lim = 1000; + while (dma_read32(DMA_CSR) & DMA_FIFO_ISDRAIN) { + if (--lim == 0) { + printk(KERN_ALERT PFX "esp%d: DMA will not drain!\n", + esp->host->unique_id); + break; + } + udelay(1); + } } -static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length) +static void sun3x_esp_dma_invalidate(struct esp *esp) { - struct sparc_dma_registers *dregs = - (struct sparc_dma_registers *) esp->dregs; - - /* Set up the DMA counters */ + u32 val; + int lim; + + lim = 1000; + while ((val = dma_read32(DMA_CSR)) & DMA_PEND_READ) { + if (--lim == 0) { + printk(KERN_ALERT PFX "esp%d: DMA will not " + "invalidate!\n", esp->host->unique_id); + break; + } + udelay(1); + } - dregs->st_addr = vaddress; - dregs->cond_reg = ((dregs->cond_reg & ~(DMA_ST_WRITE)) | DMA_ENABLE); + val &= ~(DMA_ENABLE | DMA_ST_WRITE | DMA_BCNT_ENAB); + val |= DMA_FIFO_INV; + dma_write32(val, DMA_CSR); + val &= ~DMA_FIFO_INV; + dma_write32(val, DMA_CSR); } -static void dma_ints_off(struct NCR_ESP *esp) +static void sun3x_esp_send_dma_cmd(struct esp *esp, u32 addr, u32 esp_count, + u32 dma_count, int write, u8 cmd) { - DMA_INTSOFF((struct sparc_dma_registers *) esp->dregs); + u32 csr; + + BUG_ON(!(cmd & ESP_CMD_DMA)); + + sun3x_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW); + sun3x_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED); + csr = dma_read32(DMA_CSR); + csr |= DMA_ENABLE; + if (write) + csr |= DMA_ST_WRITE; + else + csr &= ~DMA_ST_WRITE; + dma_write32(csr, DMA_CSR); + dma_write32(addr, DMA_ADDR); + + scsi_esp_cmd(esp, cmd); } -static void dma_ints_on(struct NCR_ESP *esp) +static int sun3x_esp_dma_error(struct esp *esp) { - DMA_INTSON((struct sparc_dma_registers *) esp->dregs); -} + u32 csr = dma_read32(DMA_CSR); -static int dma_irq_p(struct NCR_ESP *esp) -{ - return DMA_IRQ_P((struct sparc_dma_registers *) esp->dregs); + if (csr & DMA_HNDL_ERROR) + return 1; + + return 0; } -static void dma_poll(struct NCR_ESP *esp, unsigned char *vaddr) +static const struct esp_driver_ops sun3x_esp_ops = { + .esp_write8 = sun3x_esp_write8, + .esp_read8 = sun3x_esp_read8, + .map_single = sun3x_esp_map_single, + .map_sg = sun3x_esp_map_sg, + .unmap_single = sun3x_esp_unmap_single, + .unmap_sg = sun3x_esp_unmap_sg, + .irq_pending = sun3x_esp_irq_pending, + .reset_dma = sun3x_esp_reset_dma, + .dma_drain = sun3x_esp_dma_drain, + .dma_invalidate = sun3x_esp_dma_invalidate, + .send_dma_cmd = sun3x_esp_send_dma_cmd, + .dma_error = sun3x_esp_dma_error, +}; + +static int __devinit esp_sun3x_probe(struct platform_device *dev) { - int count = 50; - dma_do_drain(esp); + struct scsi_host_template *tpnt = &scsi_esp_template; + struct Scsi_Host *host; + struct esp *esp; + struct resource *res; + int err = -ENOMEM; - /* Wait till the first bits settle. */ - while((*(volatile unsigned char *)vaddr == 0xff) && (--count > 0)) - udelay(1); + host = scsi_host_alloc(tpnt, sizeof(struct esp)); + if (!host) + goto fail; - if(!count) { -// printk("%s:%d timeout expire (data %02x)\n", __FILE__, __LINE__, -// esp_read(esp->eregs->esp_fdata)); - //mach_halt(); - vaddr[0] = esp_read(esp->eregs->esp_fdata); - vaddr[1] = esp_read(esp->eregs->esp_fdata); - } + host->max_id = 8; + esp = shost_priv(host); -} + esp->host = host; + esp->dev = dev; + esp->ops = &sun3x_esp_ops; -static int dma_ports_p(struct NCR_ESP *esp) -{ - return (((struct sparc_dma_registers *) esp->dregs)->cond_reg - & DMA_INT_ENAB); -} + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res && !res->start) + goto fail_unlink; -/* Resetting various pieces of the ESP scsi driver chipset/buses. */ -static void dma_reset(struct NCR_ESP *esp) -{ - struct sparc_dma_registers *dregs = - (struct sparc_dma_registers *)esp->dregs; + esp->regs = ioremap_nocache(res->start, 0x20); + if (!esp->regs) + goto fail_unmap_regs; - /* Punt the DVMA into a known state. */ - dregs->cond_reg |= DMA_RST_SCSI; - dregs->cond_reg &= ~(DMA_RST_SCSI); - DMA_INTSON(dregs); -} + res = platform_get_resource(dev, IORESOURCE_MEM, 1); + if (!res && !res->start) + goto fail_unmap_regs; -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write) -{ - struct sparc_dma_registers *dregs = - (struct sparc_dma_registers *) esp->dregs; - unsigned long nreg = dregs->cond_reg; + esp->dma_regs = ioremap_nocache(res->start, 0x10); -// printk("dma_setup %c addr %08x cnt %08x\n", -// write ? 'W' : 'R', addr, count); + esp->command_block = dma_alloc_coherent(esp->dev, 16, + &esp->command_block_dma, + GFP_KERNEL); + if (!esp->command_block) + goto fail_unmap_regs_dma; - dma_do_drain(esp); + host->irq = platform_get_irq(dev, 0); + err = request_irq(host->irq, scsi_esp_intr, IRQF_SHARED, + "SUN3X ESP", esp); + if (err < 0) + goto fail_unmap_command_block; - if(write) - nreg |= DMA_ST_WRITE; - else { - nreg &= ~(DMA_ST_WRITE); - } - - nreg |= DMA_ENABLE; - dregs->cond_reg = nreg; - dregs->st_addr = addr; -} + esp->scsi_id = 7; + esp->host->this_id = esp->scsi_id; + esp->scsi_id_mask = (1 << esp->scsi_id); + esp->cfreq = 20000000; -static void dma_mmu_get_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - sp->SCp.have_data_in = dvma_map((unsigned long)sp->SCp.buffer, - sp->SCp.this_residual); - sp->SCp.ptr = (char *)((unsigned long)sp->SCp.have_data_in); + dev_set_drvdata(&dev->dev, esp); + + err = scsi_esp_register(esp, &dev->dev); + if (err) + goto fail_free_irq; + + return 0; + +fail_free_irq: + free_irq(host->irq, esp); +fail_unmap_command_block: + dma_free_coherent(esp->dev, 16, + esp->command_block, + esp->command_block_dma); +fail_unmap_regs_dma: + iounmap(esp->dma_regs); +fail_unmap_regs: + iounmap(esp->regs); +fail_unlink: + scsi_host_put(host); +fail: + return err; } -static void dma_mmu_get_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp) +static int __devexit esp_sun3x_remove(struct platform_device *dev) { - int sz = sp->SCp.buffers_residual; - struct scatterlist *sg = sp->SCp.buffer; - - while (sz >= 0) { - sg[sz].dma_address = dvma_map((unsigned long)sg_virt(&sg[sz]), - sg[sz].length); - sz--; - } - sp->SCp.ptr=(char *)((unsigned long)sp->SCp.buffer->dma_address); -} + struct esp *esp = dev_get_drvdata(&dev->dev); + unsigned int irq = esp->host->irq; + u32 val; -static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - dvma_unmap((char *)sp->SCp.have_data_in); -} + scsi_esp_unregister(esp); -static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp) -{ - int sz = sp->use_sg - 1; - struct scatterlist *sg = (struct scatterlist *)sp->request_buffer; - - while(sz >= 0) { - dvma_unmap((char *)sg[sz].dma_address); - sz--; - } -} + /* Disable interrupts. */ + val = dma_read32(DMA_CSR); + dma_write32(val & ~DMA_INT_ENAB, DMA_CSR); -static void dma_advance_sg (Scsi_Cmnd *sp) -{ - sp->SCp.ptr = (char *)((unsigned long)sp->SCp.buffer->dma_address); -} + free_irq(irq, esp); + dma_free_coherent(esp->dev, 16, + esp->command_block, + esp->command_block_dma); -static int sun3x_esp_release(struct Scsi_Host *instance) -{ - /* this code does not support being compiled as a module */ - return 1; + scsi_host_put(esp->host); + return 0; } -static struct scsi_host_template driver_template = { - .proc_name = "sun3x_esp", - .proc_info = &esp_proc_info, - .name = "Sun ESP 100/100a/200", - .detect = sun3x_esp_detect, - .release = sun3x_esp_release, - .slave_alloc = esp_slave_alloc, - .slave_destroy = esp_slave_destroy, - .info = esp_info, - .queuecommand = esp_queue, - .eh_abort_handler = esp_abort, - .eh_bus_reset_handler = esp_reset, - .can_queue = 7, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = DISABLE_CLUSTERING, +static struct platform_driver esp_sun3x_driver = { + .probe = esp_sun3x_probe, + .remove = __devexit_p(esp_sun3x_remove), + .driver = { + .name = "sun3x_esp", + }, }; +static int __init sun3x_esp_init(void) +{ + return platform_driver_register(&esp_sun3x_driver); +} -#include "scsi_module.c" +static void __exit sun3x_esp_exit(void) +{ + platform_driver_unregister(&esp_sun3x_driver); +} +MODULE_DESCRIPTION("Sun3x ESP SCSI driver"); +MODULE_AUTHOR("Thomas Bogendoerfer (tsbogend@alpha.franken.de)"); MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_init(sun3x_esp_init); +module_exit(sun3x_esp_exit); diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index 254bdaeb35f..35142b5341b 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -3842,7 +3842,7 @@ int sym_compute_residual(struct sym_hcb *np, struct sym_ccb *cp) if (cp->startp == cp->phys.head.lastp || sym_evaluate_dp(np, cp, scr_to_cpu(cp->phys.head.lastp), &dp_ofs) < 0) { - return cp->data_len; + return cp->data_len - cp->odd_byte_adjustment; } /* diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c index 662c00451be..58d7eee4fe8 100644 --- a/drivers/scsi/u14-34f.c +++ b/drivers/scsi/u14-34f.c @@ -1216,7 +1216,7 @@ static void scsi_to_dev_dir(unsigned int i, unsigned int j) { cpp->xdir = DTD_IN; return; } - else if (SCpnt->sc_data_direction == DMA_FROM_DEVICE) { + else if (SCpnt->sc_data_direction == DMA_TO_DEVICE) { cpp->xdir = DTD_OUT; return; } |