summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/a100u2w.c2
-rw-r--r--drivers/scsi/aacraid/commsup.c2
-rw-r--r--drivers/scsi/aic7xxx_old/aic7xxx.seq2
-rw-r--r--drivers/scsi/aic94xx/aic94xx_reg_def.h4
-rw-r--r--drivers/scsi/aic94xx/aic94xx_seq.c6
-rw-r--r--drivers/scsi/bfa/bfa_fcpim.c2
-rw-r--r--drivers/scsi/bfa/bfa_fcs_lport.c2
-rw-r--r--drivers/scsi/dc395x.c8
-rw-r--r--drivers/scsi/libfc/fc_fcp.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_attr.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_hbadisc.c2
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c2
-rw-r--r--drivers/scsi/megaraid.h2
-rw-r--r--drivers/scsi/pm8001/pm8001_init.c2
-rw-r--r--drivers/scsi/scsi_netlink.c2
-rw-r--r--drivers/scsi/sym53c8xx_2/sym_glue.c2
16 files changed, 22 insertions, 22 deletions
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index dbbc601948e..7cb575654e4 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -416,7 +416,7 @@ static u8 orc_load_firmware(struct orc_host * host)
/* Go back and check they match */
outb(PRGMRST | DOWNLOAD, host->base + ORC_RISCCTL); /* Reset program count 0 */
- bios_addr -= 0x1000; /* Reset the BIOS adddress */
+ bios_addr -= 0x1000; /* Reset the BIOS address */
for (i = 0, data32_ptr = (u8 *) & data32; /* Check the code */
i < 0x1000; /* Firmware code size = 4K */
i++, bios_addr++) {
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index afc9aeba5ed..060ac4bd5a1 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -91,7 +91,7 @@ void aac_fib_map_free(struct aac_dev *dev)
* aac_fib_setup - setup the fibs
* @dev: Adapter to set up
*
- * Allocate the PCI space for the fibs, map it and then intialise the
+ * Allocate the PCI space for the fibs, map it and then initialise the
* fib area, the unmapped fib data and also the free list
*/
diff --git a/drivers/scsi/aic7xxx_old/aic7xxx.seq b/drivers/scsi/aic7xxx_old/aic7xxx.seq
index 5997e7c3a19..1565be9ebd4 100644
--- a/drivers/scsi/aic7xxx_old/aic7xxx.seq
+++ b/drivers/scsi/aic7xxx_old/aic7xxx.seq
@@ -1178,7 +1178,7 @@ notFound:
/*
* Retrieve an SCB by SCBID first searching the disconnected list falling
* back to DMA'ing the SCB down from the host. This routine assumes that
- * ARG_1 is the SCBID of interrest and that SINDEX is the position in the
+ * ARG_1 is the SCBID of interest and that SINDEX is the position in the
* disconnected list to start the search from. If SINDEX is SCB_LIST_NULL,
* we go directly to the host for the SCB.
*/
diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h
index 28aaf349c11..40273a747d2 100644
--- a/drivers/scsi/aic94xx/aic94xx_reg_def.h
+++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h
@@ -1689,7 +1689,7 @@
#define PHY_START_CAL 0x01
/*
- * HST_PCIX2 Registers, Addresss Range: (0x00-0xFC)
+ * HST_PCIX2 Registers, Address Range: (0x00-0xFC)
*/
#define PCIX_REG_BASE_ADR 0xB8040000
@@ -1802,7 +1802,7 @@
#define PCIC_TP_CTRL 0xFC
/*
- * EXSI Registers, Addresss Range: (0x00-0xFC)
+ * EXSI Registers, Address Range: (0x00-0xFC)
*/
#define EXSI_REG_BASE_ADR REG_BASE_ADDR_EXSI
diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c
index 74374618010..390168f62a1 100644
--- a/drivers/scsi/aic94xx/aic94xx_seq.c
+++ b/drivers/scsi/aic94xx/aic94xx_seq.c
@@ -797,7 +797,7 @@ static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha, int lseq)
int j;
/* Start from Page 1 of Mode 0 and 1. */
moffs = LSEQ_PAGE_SIZE + i*LSEQ_MODE_SCRATCH_SIZE;
- /* All the fields of page 1 can be intialized to 0. */
+ /* All the fields of page 1 can be initialized to 0. */
for (j = 0; j < LSEQ_PAGE_SIZE; j += 4)
asd_write_reg_dword(asd_ha, LmSCRATCH(lseq)+moffs+j,0);
}
@@ -938,7 +938,7 @@ static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha)
asd_write_reg_dword(asd_ha, SCBPRO, 0);
asd_write_reg_dword(asd_ha, CSEQCON, 0);
- /* Intialize CSEQ Mode 11 Interrupt Vectors.
+ /* Initialize CSEQ Mode 11 Interrupt Vectors.
* The addresses are 16 bit wide and in dword units.
* The values of their macros are in byte units.
* Thus we have to divide by 4. */
@@ -961,7 +961,7 @@ static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha)
asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop);
for (i = 0; i < 8; i++) {
- /* Intialize Mode n Link m Interrupt Enable. */
+ /* Initialize Mode n Link m Interrupt Enable. */
asd_write_reg_dword(asd_ha, CMnINTEN(i), EN_CMnRSPMBXF);
/* Initialize Mode n Request Mailbox. */
asd_write_reg_dword(asd_ha, CMnREQMBX(i), 0);
diff --git a/drivers/scsi/bfa/bfa_fcpim.c b/drivers/scsi/bfa/bfa_fcpim.c
index 33c8dd51f47..aabbf3d3b39 100644
--- a/drivers/scsi/bfa/bfa_fcpim.c
+++ b/drivers/scsi/bfa/bfa_fcpim.c
@@ -2092,7 +2092,7 @@ bfa_ioim_sm_cleanup_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
case BFA_IOIM_SM_ABORT:
/**
- * IO is alraedy being cleaned up implicitly
+ * IO is already being cleaned up implicitly
*/
ioim->io_cbfn = __bfa_cb_ioim_abort;
break;
diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c
index b522bf30247..b7aa23a3b1e 100644
--- a/drivers/scsi/bfa/bfa_fcs_lport.c
+++ b/drivers/scsi/bfa/bfa_fcs_lport.c
@@ -5742,7 +5742,7 @@ bfa_cb_lps_fdisc_comp(void *bfad, void *uarg, bfa_status_t status)
switch (status) {
case BFA_STATUS_OK:
/*
- * Initialiaze the V-Port fields
+ * Initialize the V-Port fields
*/
__vport_fcid(vport) = bfa_lps_get_pid(vport->lps);
vport->vport_stats.fdisc_accepts++;
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 54f50b07dac..31bbfb244bc 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -3795,7 +3795,7 @@ static struct DeviceCtlBlk *device_alloc(struct AdapterCtlBlk *acb,
* adapter_add_device - Adds the device instance to the adaptor instance.
*
* @acb: The adapter device to be updated
- * @dcb: A newly created and intialised device instance to add.
+ * @dcb: A newly created and initialised device instance to add.
**/
static void adapter_add_device(struct AdapterCtlBlk *acb,
struct DeviceCtlBlk *dcb)
@@ -4497,7 +4497,7 @@ static void __devinit adapter_init_chip(struct AdapterCtlBlk *acb)
* init_adapter - Grab the resource for the card, setup the adapter
* information, set the card into a known state, create the various
* tables etc etc. This basically gets all adapter information all up
- * to date, intialised and gets the chip in sync with it.
+ * to date, initialised and gets the chip in sync with it.
*
* @host: This hosts adapter structure
* @io_port: The base I/O port
@@ -4788,7 +4788,7 @@ static void banner_display(void)
* that it finds in the system. The pci_dev strcuture indicates which
* instance we are being called from.
*
- * @dev: The PCI device to intialize.
+ * @dev: The PCI device to initialize.
* @id: Looks like a pointer to the entry in our pci device table
* that was actually matched by the PCI subsystem.
*
@@ -4859,7 +4859,7 @@ fail:
* dc395x_remove_one - Called to remove a single instance of the
* adapter.
*
- * @dev: The PCI device to intialize.
+ * @dev: The PCI device to initialize.
**/
static void __devexit dc395x_remove_one(struct pci_dev *dev)
{
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index c797f6b48f0..54a6ec8e131 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -1212,7 +1212,7 @@ static void fc_lun_reset_send(unsigned long data)
/**
* fc_lun_reset() - Send a LUN RESET command to a device
* and wait for the reply
- * @lport: The local port to sent the comand on
+ * @lport: The local port to sent the command on
* @fsp: The FCP packet that identifies the LUN to be reset
* @id: The SCSI command ID
* @lun: The LUN ID to be reset
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index f681eea5773..0e4abb96d68 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1339,7 +1339,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
}
/**
- * lpfc_param_init - Intializes a cfg attribute
+ * lpfc_param_init - Initializes a cfg attribute
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index a345dde16c8..2a6866e63aa 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2614,7 +2614,7 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
if (unlikely(!fcf_record)) {
lpfc_printf_log(phba, KERN_ERR,
LOG_MBOX | LOG_SLI,
- "2554 Could not allocate memmory for "
+ "2554 Could not allocate memory for "
"fcf record\n");
rc = -ENODEV;
goto out;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 0d1e187b005..c5614cfcc6e 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -9619,7 +9619,7 @@ lpfc_sli4_intr_handler(int irq, void *dev_id)
* lpfc_sli4_queue_free - free a queue structure and associated memory
* @queue: The queue structure to free.
*
- * This function frees a queue structure and the DMAable memeory used for
+ * This function frees a queue structure and the DMAable memory used for
* the host resident queue. This function must be called after destroying the
* queue on the HBA.
**/
diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h
index 2b4a048cadf..deb24ad1b8d 100644
--- a/drivers/scsi/megaraid.h
+++ b/drivers/scsi/megaraid.h
@@ -13,7 +13,7 @@
*/
/*
- * Comand coalescing - This feature allows the driver to be able to combine
+ * Command coalescing - This feature allows the driver to be able to combine
* two or more commands and issue as one command in order to boost I/O
* performance. Useful if the nature of the I/O is sequential. It is not very
* useful for random natured I/Os.
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index f8c86b28f03..b95285f3383 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -603,7 +603,7 @@ static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
#endif
intx:
- /* intialize the INT-X interrupt */
+ /* initialize the INT-X interrupt */
rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED, DRV_NAME,
SHOST_TO_SAS_HA(pm8001_ha->shost));
return rc;
diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c
index d53e6503c6d..a2ed201885a 100644
--- a/drivers/scsi/scsi_netlink.c
+++ b/drivers/scsi/scsi_netlink.c
@@ -477,7 +477,7 @@ EXPORT_SYMBOL_GPL(scsi_nl_remove_driver);
/**
- * scsi_netlink_init - Called by SCSI subsystem to intialize
+ * scsi_netlink_init - Called by SCSI subsystem to initialize
* the SCSI transport netlink interface
*
**/
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 8b955b534a3..4afa81ad2ca 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -1864,7 +1864,7 @@ static pci_ers_result_t sym2_io_slot_dump(struct pci_dev *pdev)
*
* This routine is similar to sym_set_workarounds(), except
* that, at this point, we already know that the device was
- * successfully intialized at least once before, and so most
+ * successfully initialized at least once before, and so most
* of the steps taken there are un-needed here.
*/
static void sym2_reset_workarounds(struct pci_dev *pdev)
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-11 12:51:09 +0000