summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/hpsa.c25
-rw-r--r--drivers/scsi/hpsa_cmd.h2
2 files changed, 22 insertions, 5 deletions
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index ca92141b773..c096cda3a6f 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3128,7 +3128,7 @@ static __devinit int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
#define hpsa_noop(p) hpsa_message(p, 3, 0)
static int hpsa_controller_hard_reset(struct pci_dev *pdev,
- void * __iomem vaddr, bool use_doorbell)
+ void * __iomem vaddr, u32 use_doorbell)
{
u16 pmcsr;
int pos;
@@ -3139,7 +3139,7 @@ static int hpsa_controller_hard_reset(struct pci_dev *pdev,
* other way using the doorbell register.
*/
dev_info(&pdev->dev, "using doorbell to reset controller\n");
- writel(DOORBELL_CTLR_RESET, vaddr + SA5_DOORBELL);
+ writel(use_doorbell, vaddr + SA5_DOORBELL);
msleep(1000);
} else { /* Try to do it the PCI power state way */
@@ -3243,7 +3243,7 @@ static __devinit int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
u32 misc_fw_support;
int rc;
struct CfgTable __iomem *cfgtable;
- bool use_doorbell;
+ u32 use_doorbell;
u32 board_id;
u16 command_register;
@@ -3306,9 +3306,24 @@ static __devinit int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
if (rc)
goto unmap_vaddr;
- /* If reset via doorbell register is supported, use that. */
+ /* If reset via doorbell register is supported, use that.
+ * There are two such methods. Favor the newest method.
+ */
misc_fw_support = readl(&cfgtable->misc_fw_support);
- use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET;
+ use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET2;
+ if (use_doorbell) {
+ use_doorbell = DOORBELL_CTLR_RESET2;
+ } else {
+ use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET;
+ if (use_doorbell) {
+ dev_warn(&pdev->dev, "Controller claims that "
+ "'Bit 2 doorbell reset' is "
+ "supported, but not 'bit 5 doorbell reset'. "
+ "Firmware update is recommended.\n");
+ rc = -ENODEV;
+ goto unmap_cfgtable;
+ }
+ }
rc = hpsa_controller_hard_reset(pdev, vaddr, use_doorbell);
if (rc)
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index 8fd35a7abcd..55d741b019d 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -101,6 +101,7 @@
#define CFGTBL_ChangeReq 0x00000001l
#define CFGTBL_AccCmds 0x00000001l
#define DOORBELL_CTLR_RESET 0x00000004l
+#define DOORBELL_CTLR_RESET2 0x00000020l
#define CFGTBL_Trans_Simple 0x00000002l
#define CFGTBL_Trans_Performant 0x00000004l
@@ -337,6 +338,7 @@ struct CfgTable {
u8 reserved[0x78 - 0x58];
u32 misc_fw_support; /* offset 0x78 */
#define MISC_FW_DOORBELL_RESET (0x02)
+#define MISC_FW_DOORBELL_RESET2 (0x010)
u8 driver_version[32];
};