diff options
Diffstat (limited to 'drivers/scsi')
261 files changed, 28159 insertions, 31373 deletions
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index b003baf8d40..5a9475e56d0 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -2122,7 +2122,7 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id TW_PARAM_PORTCOUNT, TW_PARAM_PORTCOUNT_LENGTH))); /* Now setup the interrupt handler */ - retval = request_irq(pdev->irq, twa_interrupt, SA_SHIRQ, "3w-9xxx", tw_dev); + retval = request_irq(pdev->irq, twa_interrupt, IRQF_SHARED, "3w-9xxx", tw_dev); if (retval) { TW_PRINTK(tw_dev->host, TW_DRIVER, 0x30, "Error requesting IRQ"); goto out_remove_host; diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c index 17dbd4ac869..f3a5f422a8e 100644 --- a/drivers/scsi/3w-xxxx.c +++ b/drivers/scsi/3w-xxxx.c @@ -2397,7 +2397,7 @@ static int __devinit tw_probe(struct pci_dev *pdev, const struct pci_device_id * printk(KERN_WARNING "3w-xxxx: scsi%d: Found a 3ware Storage Controller at 0x%x, IRQ: %d.\n", host->host_no, tw_dev->base_addr, pdev->irq); /* Now setup the interrupt handler */ - retval = request_irq(pdev->irq, tw_interrupt, SA_SHIRQ, "3w-xxxx", tw_dev); + retval = request_irq(pdev->irq, tw_interrupt, IRQF_SHARED, "3w-xxxx", tw_dev); if (retval) { printk(KERN_WARNING "3w-xxxx: Error requesting IRQ."); goto out_remove_host; diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c index 3c683dc2354..657a3ab7539 100644 --- a/drivers/scsi/53c700.c +++ b/drivers/scsi/53c700.c @@ -114,7 +114,6 @@ * */ #define NCR_700_VERSION "2.8" -#include <linux/config.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/string.h> @@ -174,6 +173,7 @@ STATIC int NCR_700_bus_reset(struct scsi_cmnd * SCpnt); STATIC int NCR_700_host_reset(struct scsi_cmnd * SCpnt); STATIC void NCR_700_chip_setup(struct Scsi_Host *host); STATIC void NCR_700_chip_reset(struct Scsi_Host *host); +STATIC int NCR_700_slave_alloc(struct scsi_device *SDpnt); STATIC int NCR_700_slave_configure(struct scsi_device *SDpnt); STATIC void NCR_700_slave_destroy(struct scsi_device *SDpnt); static int NCR_700_change_queue_depth(struct scsi_device *SDpnt, int depth); @@ -183,10 +183,6 @@ STATIC struct device_attribute *NCR_700_dev_attrs[]; STATIC struct scsi_transport_template *NCR_700_transport_template = NULL; -struct NCR_700_sense { - unsigned char cmnd[MAX_COMMAND_SIZE]; -}; - static char *NCR_700_phase[] = { "", "after selection", @@ -334,6 +330,7 @@ NCR_700_detect(struct scsi_host_template *tpnt, tpnt->use_clustering = ENABLE_CLUSTERING; tpnt->slave_configure = NCR_700_slave_configure; tpnt->slave_destroy = NCR_700_slave_destroy; + tpnt->slave_alloc = NCR_700_slave_alloc; tpnt->change_queue_depth = NCR_700_change_queue_depth; tpnt->change_queue_type = NCR_700_change_queue_type; @@ -612,9 +609,10 @@ NCR_700_scsi_done(struct NCR_700_Host_Parameters *hostdata, struct NCR_700_command_slot *slot = (struct NCR_700_command_slot *)SCp->host_scribble; - NCR_700_unmap(hostdata, SCp, slot); + dma_unmap_single(hostdata->dev, slot->pCmd, + sizeof(SCp->cmnd), DMA_TO_DEVICE); if (slot->flags == NCR_700_FLAG_AUTOSENSE) { - struct NCR_700_sense *sense = SCp->device->hostdata; + char *cmnd = NCR_700_get_sense_cmnd(SCp->device); #ifdef NCR_700_DEBUG printk(" ORIGINAL CMD %p RETURNED %d, new return is %d sense is\n", SCp, SCp->cmnd[7], result); @@ -625,10 +623,9 @@ NCR_700_scsi_done(struct NCR_700_Host_Parameters *hostdata, /* restore the old result if the request sense was * successful */ if(result == 0) - result = sense->cmnd[7]; + result = cmnd[7]; } else - dma_unmap_single(hostdata->dev, slot->pCmd, - sizeof(SCp->cmnd), DMA_TO_DEVICE); + NCR_700_unmap(hostdata, SCp, slot); free_slot(slot, hostdata); #ifdef NCR_700_DEBUG @@ -970,14 +967,15 @@ process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp, status_byte(hostdata->status[0]) == COMMAND_TERMINATED) { struct NCR_700_command_slot *slot = (struct NCR_700_command_slot *)SCp->host_scribble; - if(SCp->cmnd[0] == REQUEST_SENSE) { + if(slot->flags == NCR_700_FLAG_AUTOSENSE) { /* OOPS: bad device, returning another * contingent allegiance condition */ scmd_printk(KERN_ERR, SCp, "broken device is looping in contingent allegiance: ignoring\n"); NCR_700_scsi_done(hostdata, SCp, hostdata->status[0]); } else { - struct NCR_700_sense *sense = SCp->device->hostdata; + char *cmnd = + NCR_700_get_sense_cmnd(SCp->device); #ifdef NCR_DEBUG scsi_print_command(SCp); printk(" cmd %p has status %d, requesting sense\n", @@ -995,21 +993,21 @@ process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp, sizeof(SCp->cmnd), DMA_TO_DEVICE); - sense->cmnd[0] = REQUEST_SENSE; - sense->cmnd[1] = (SCp->device->lun & 0x7) << 5; - sense->cmnd[2] = 0; - sense->cmnd[3] = 0; - sense->cmnd[4] = sizeof(SCp->sense_buffer); - sense->cmnd[5] = 0; + cmnd[0] = REQUEST_SENSE; + cmnd[1] = (SCp->device->lun & 0x7) << 5; + cmnd[2] = 0; + cmnd[3] = 0; + cmnd[4] = sizeof(SCp->sense_buffer); + cmnd[5] = 0; /* Here's a quiet hack: the * REQUEST_SENSE command is six bytes, * so store a flag indicating that * this was an internal sense request * and the original status at the end * of the command */ - sense->cmnd[6] = NCR_700_INTERNAL_SENSE_MAGIC; - sense->cmnd[7] = hostdata->status[0]; - slot->pCmd = dma_map_single(hostdata->dev, sense->cmnd, sizeof(sense->cmnd), DMA_TO_DEVICE); + cmnd[6] = NCR_700_INTERNAL_SENSE_MAGIC; + cmnd[7] = hostdata->status[0]; + slot->pCmd = dma_map_single(hostdata->dev, cmnd, MAX_COMMAND_SIZE, DMA_TO_DEVICE); slot->dma_handle = dma_map_single(hostdata->dev, SCp->sense_buffer, sizeof(SCp->sense_buffer), DMA_FROM_DEVICE); slot->SG[0].ins = bS_to_host(SCRIPT_MOVE_DATA_IN | sizeof(SCp->sense_buffer)); slot->SG[0].pAddr = bS_to_host(slot->dma_handle); @@ -1531,7 +1529,7 @@ NCR_700_intr(int irq, void *dev_id, struct pt_regs *regs) /* clear all the negotiated parameters */ __shost_for_each_device(SDp, host) - SDp->hostdata = NULL; + NCR_700_clear_flag(SDp, ~0); /* clear all the slots and their pending commands */ for(i = 0; i < NCR_700_COMMAND_SLOTS_PER_HOST; i++) { @@ -2036,7 +2034,17 @@ NCR_700_set_offset(struct scsi_target *STp, int offset) spi_flags(STp) |= NCR_700_DEV_PRINT_SYNC_NEGOTIATION; } +STATIC int +NCR_700_slave_alloc(struct scsi_device *SDp) +{ + SDp->hostdata = kzalloc(sizeof(struct NCR_700_Device_Parameters), + GFP_KERNEL); + if (!SDp->hostdata) + return -ENOMEM; + + return 0; +} STATIC int NCR_700_slave_configure(struct scsi_device *SDp) @@ -2044,11 +2052,6 @@ NCR_700_slave_configure(struct scsi_device *SDp) struct NCR_700_Host_Parameters *hostdata = (struct NCR_700_Host_Parameters *)SDp->host->hostdata[0]; - SDp->hostdata = kmalloc(GFP_KERNEL, sizeof(struct NCR_700_sense)); - - if (!SDp->hostdata) - return -ENOMEM; - /* to do here: allocate memory; build a queue_full list */ if(SDp->tagged_supported) { scsi_set_tag_type(SDp, MSG_ORDERED_TAG); diff --git a/drivers/scsi/53c700.h b/drivers/scsi/53c700.h index 7f22a06fe5e..97ebe71b701 100644 --- a/drivers/scsi/53c700.h +++ b/drivers/scsi/53c700.h @@ -12,7 +12,7 @@ #include <asm/io.h> #include <scsi/scsi_device.h> - +#include <scsi/scsi_cmnd.h> /* Turn on for general debugging---too verbose for normal use */ #undef NCR_700_DEBUG @@ -76,11 +76,16 @@ struct NCR_700_SG_List { #define SCRIPT_RETURN 0x90080000 }; -/* We use device->hostdata to store negotiated parameters. This is - * supposed to be a pointer to a device private area, but we cannot - * really use it as such since it will never be freed, so just use the - * 32 bits to cram the information. The SYNC negotiation sequence looks - * like: +struct NCR_700_Device_Parameters { + /* space for creating a request sense command. Really, except + * for the annoying SCSI-2 requirement for LUN information in + * cmnd[1], this could be in static storage */ + unsigned char cmnd[MAX_COMMAND_SIZE]; + __u8 depth; +}; + + +/* The SYNC negotiation sequence looks like: * * If DEV_NEGOTIATED_SYNC not set, tack and SDTR message on to the * initial identify for the device and set DEV_BEGIN_SYNC_NEGOTATION @@ -98,19 +103,26 @@ struct NCR_700_SG_List { #define NCR_700_DEV_BEGIN_SYNC_NEGOTIATION (1<<17) #define NCR_700_DEV_PRINT_SYNC_NEGOTIATION (1<<19) +static inline char *NCR_700_get_sense_cmnd(struct scsi_device *SDp) +{ + struct NCR_700_Device_Parameters *hostdata = SDp->hostdata; + + return hostdata->cmnd; +} + static inline void NCR_700_set_depth(struct scsi_device *SDp, __u8 depth) { - long l = (long)SDp->hostdata; + struct NCR_700_Device_Parameters *hostdata = SDp->hostdata; - l &= 0xffff00ff; - l |= 0xff00 & (depth << 8); - SDp->hostdata = (void *)l; + hostdata->depth = depth; } static inline __u8 NCR_700_get_depth(struct scsi_device *SDp) { - return ((((unsigned long)SDp->hostdata) & 0xff00)>>8); + struct NCR_700_Device_Parameters *hostdata = SDp->hostdata; + + return hostdata->depth; } static inline int NCR_700_is_flag_set(struct scsi_device *SDp, __u32 flag) diff --git a/drivers/scsi/53c7xx.c b/drivers/scsi/53c7xx.c index 765769a629e..acf292736b4 100644 --- a/drivers/scsi/53c7xx.c +++ b/drivers/scsi/53c7xx.c @@ -232,7 +232,6 @@ #include <linux/module.h> -#include <linux/config.h> #include <linux/types.h> #include <asm/setup.h> @@ -1071,7 +1070,7 @@ NCR53c7x0_init (struct Scsi_Host *host) { NCR53c7x0_driver_init (host); - if (request_irq(host->irq, NCR53c7x0_intr, SA_SHIRQ, "53c7xx", host)) + if (request_irq(host->irq, NCR53c7x0_intr, IRQF_SHARED, "53c7xx", host)) { printk("scsi%d : IRQ%d not free, detaching\n", host->host_no, host->irq); @@ -3452,12 +3451,12 @@ create_cmd (Scsi_Cmnd *cmd) { for (i = 0; cmd->use_sg ? (i < cmd->use_sg) : !i; cmd_datain += 4, cmd_dataout += 4, ++i) { u32 vbuf = cmd->use_sg - ? (u32)page_address(((struct scatterlist *)cmd->buffer)[i].page)+ - ((struct scatterlist *)cmd->buffer)[i].offset + ? (u32)page_address(((struct scatterlist *)cmd->request_buffer)[i].page)+ + ((struct scatterlist *)cmd->request_buffer)[i].offset : (u32)(cmd->request_buffer); u32 bbuf = virt_to_bus((void *)vbuf); u32 count = cmd->use_sg ? - ((struct scatterlist *)cmd->buffer)[i].length : + ((struct scatterlist *)cmd->request_buffer)[i].length : cmd->request_bufflen; /* @@ -4233,7 +4232,7 @@ restart: * Purpose : handle NCR53c7x0 interrupts for all NCR devices sharing * the same IRQ line. * - * Inputs : Since we're using the SA_INTERRUPT interrupt handler + * Inputs : Since we're using the IRQF_DISABLED interrupt handler * semantics, irq indicates the interrupt which invoked * this handler. * @@ -5418,7 +5417,7 @@ insn_to_offset (Scsi_Cmnd *cmd, u32 *insn) { if ((buffers = cmd->use_sg)) { for (offset = 0, - segment = (struct scatterlist *) cmd->buffer; + segment = (struct scatterlist *) cmd->request_buffer; buffers && !((found = ((ptr >= (char *)page_address(segment->page)+segment->offset) && (ptr < ((char *)page_address(segment->page)+segment->offset+segment->length))))); --buffers, offset += segment->length, ++segment) diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c index bde3d5834ad..4ea49fd7965 100644 --- a/drivers/scsi/BusLogic.c +++ b/drivers/scsi/BusLogic.c @@ -29,7 +29,6 @@ #define BusLogic_DriverVersion "2.1.16" #define BusLogic_DriverDate "18 July 2002" -#include <linux/config.h> #include <linux/module.h> #include <linux/init.h> #include <linux/interrupt.h> @@ -663,7 +662,7 @@ static int __init BusLogic_InitializeMultiMasterProbeInfo(struct BusLogic_HostAd particular standard ISA I/O Address need not be probed. */ PrimaryProbeInfo->IO_Address = 0; - while ((PCI_Device = pci_find_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER, PCI_Device)) != NULL) { + while ((PCI_Device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER, PCI_Device)) != NULL) { struct BusLogic_HostAdapter *HostAdapter = PrototypeHostAdapter; struct BusLogic_PCIHostAdapterInformation PCIHostAdapterInformation; enum BusLogic_ISACompatibleIOPort ModifyIOAddressRequest; @@ -763,7 +762,7 @@ static int __init BusLogic_InitializeMultiMasterProbeInfo(struct BusLogic_HostAd PrimaryProbeInfo->Bus = Bus; PrimaryProbeInfo->Device = Device; PrimaryProbeInfo->IRQ_Channel = IRQ_Channel; - PrimaryProbeInfo->PCI_Device = PCI_Device; + PrimaryProbeInfo->PCI_Device = pci_dev_get(PCI_Device); PCIMultiMasterCount++; } else if (BusLogic_ProbeInfoCount < BusLogic_MaxHostAdapters) { struct BusLogic_ProbeInfo *ProbeInfo = &BusLogic_ProbeInfoList[BusLogic_ProbeInfoCount++]; @@ -774,7 +773,7 @@ static int __init BusLogic_InitializeMultiMasterProbeInfo(struct BusLogic_HostAd ProbeInfo->Bus = Bus; ProbeInfo->Device = Device; ProbeInfo->IRQ_Channel = IRQ_Channel; - ProbeInfo->PCI_Device = PCI_Device; + ProbeInfo->PCI_Device = pci_dev_get(PCI_Device); NonPrimaryPCIMultiMasterCount++; PCIMultiMasterCount++; } else @@ -824,7 +823,7 @@ static int __init BusLogic_InitializeMultiMasterProbeInfo(struct BusLogic_HostAd noting the PCI bus location and assigned IRQ Channel. */ PCI_Device = NULL; - while ((PCI_Device = pci_find_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC, PCI_Device)) != NULL) { + while ((PCI_Device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC, PCI_Device)) != NULL) { unsigned char Bus; unsigned char Device; unsigned int IRQ_Channel; @@ -851,7 +850,7 @@ static int __init BusLogic_InitializeMultiMasterProbeInfo(struct BusLogic_HostAd ProbeInfo->Bus = Bus; ProbeInfo->Device = Device; ProbeInfo->IRQ_Channel = IRQ_Channel; - ProbeInfo->PCI_Device = PCI_Device; + ProbeInfo->PCI_Device = pci_dev_get(PCI_Device); break; } } @@ -875,7 +874,7 @@ static int __init BusLogic_InitializeFlashPointProbeInfo(struct BusLogic_HostAda /* Interrogate PCI Configuration Space for any FlashPoint Host Adapters. */ - while ((PCI_Device = pci_find_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT, PCI_Device)) != NULL) { + while ((PCI_Device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT, PCI_Device)) != NULL) { unsigned char Bus; unsigned char Device; unsigned int IRQ_Channel; @@ -924,7 +923,7 @@ static int __init BusLogic_InitializeFlashPointProbeInfo(struct BusLogic_HostAda ProbeInfo->Bus = Bus; ProbeInfo->Device = Device; ProbeInfo->IRQ_Channel = IRQ_Channel; - ProbeInfo->PCI_Device = PCI_Device; + ProbeInfo->PCI_Device = pci_dev_get(PCI_Device); FlashPointCount++; } else BusLogic_Warning("BusLogic: Too many Host Adapters " "detected\n", NULL); @@ -1845,7 +1844,7 @@ static boolean __init BusLogic_AcquireResources(struct BusLogic_HostAdapter *Hos /* Acquire shared access to the IRQ Channel. */ - if (request_irq(HostAdapter->IRQ_Channel, BusLogic_InterruptHandler, SA_SHIRQ, HostAdapter->FullModelName, HostAdapter) < 0) { + if (request_irq(HostAdapter->IRQ_Channel, BusLogic_InterruptHandler, IRQF_SHARED, HostAdapter->FullModelName, HostAdapter) < 0) { BusLogic_Error("UNABLE TO ACQUIRE IRQ CHANNEL %d - DETACHING\n", HostAdapter, HostAdapter->IRQ_Channel); return false; } @@ -1891,6 +1890,7 @@ static void BusLogic_ReleaseResources(struct BusLogic_HostAdapter *HostAdapter) */ if (HostAdapter->MailboxSpace) pci_free_consistent(HostAdapter->PCI_Device, HostAdapter->MailboxSize, HostAdapter->MailboxSpace, HostAdapter->MailboxSpaceHandle); + pci_dev_put(HostAdapter->PCI_Device); HostAdapter->MailboxSpace = NULL; HostAdapter->MailboxSpaceHandle = 0; HostAdapter->MailboxSize = 0; @@ -2177,6 +2177,7 @@ static int __init BusLogic_init(void) { int BusLogicHostAdapterCount = 0, DriverOptionsIndex = 0, ProbeIndex; struct BusLogic_HostAdapter *PrototypeHostAdapter; + int ret = 0; #ifdef MODULE if (BusLogic) @@ -2283,25 +2284,49 @@ static int __init BusLogic_init(void) perform Target Device Inquiry. */ if (BusLogic_ReadHostAdapterConfiguration(HostAdapter) && - BusLogic_ReportHostAdapterConfiguration(HostAdapter) && BusLogic_AcquireResources(HostAdapter) && BusLogic_CreateInitialCCBs(HostAdapter) && BusLogic_InitializeHostAdapter(HostAdapter) && BusLogic_TargetDeviceInquiry(HostAdapter)) { + BusLogic_ReportHostAdapterConfiguration(HostAdapter) && + BusLogic_AcquireResources(HostAdapter) && + BusLogic_CreateInitialCCBs(HostAdapter) && + BusLogic_InitializeHostAdapter(HostAdapter) && + BusLogic_TargetDeviceInquiry(HostAdapter)) { /* Initialization has been completed successfully. Release and re-register usage of the I/O Address range so that the Model Name of the Host Adapter will appear, and initialize the SCSI Host structure. */ - release_region(HostAdapter->IO_Address, HostAdapter->AddressCount); - if (!request_region(HostAdapter->IO_Address, HostAdapter->AddressCount, HostAdapter->FullModelName)) { - printk(KERN_WARNING "BusLogic: Release and re-register of " "port 0x%04lx failed \n", (unsigned long) HostAdapter->IO_Address); + release_region(HostAdapter->IO_Address, + HostAdapter->AddressCount); + if (!request_region(HostAdapter->IO_Address, + HostAdapter->AddressCount, + HostAdapter->FullModelName)) { + printk(KERN_WARNING + "BusLogic: Release and re-register of " + "port 0x%04lx failed \n", + (unsigned long)HostAdapter->IO_Address); BusLogic_DestroyCCBs(HostAdapter); BusLogic_ReleaseResources(HostAdapter); list_del(&HostAdapter->host_list); scsi_host_put(Host); + ret = -ENOMEM; } else { - BusLogic_InitializeHostStructure(HostAdapter, Host); - scsi_add_host(Host, HostAdapter->PCI_Device ? &HostAdapter->PCI_Device->dev : NULL); - scsi_scan_host(Host); - BusLogicHostAdapterCount++; + BusLogic_InitializeHostStructure(HostAdapter, + Host); + if (scsi_add_host(Host, HostAdapter->PCI_Device + ? &HostAdapter->PCI_Device->dev + : NULL)) { + printk(KERN_WARNING + "BusLogic: scsi_add_host()" + "failed!\n"); + BusLogic_DestroyCCBs(HostAdapter); + BusLogic_ReleaseResources(HostAdapter); + list_del(&HostAdapter->host_list); + scsi_host_put(Host); + ret = -ENODEV; + } else { + scsi_scan_host(Host); + BusLogicHostAdapterCount++; + } } } else { /* @@ -2316,12 +2341,13 @@ static int __init BusLogic_init(void) BusLogic_ReleaseResources(HostAdapter); list_del(&HostAdapter->host_list); scsi_host_put(Host); + ret = -ENODEV; } } kfree(PrototypeHostAdapter); kfree(BusLogic_ProbeInfoList); BusLogic_ProbeInfoList = NULL; - return 0; + return ret; } @@ -2955,6 +2981,7 @@ static int BusLogic_QueueCommand(struct scsi_cmnd *Command, void (*CompletionRou } +#if 0 /* BusLogic_AbortCommand aborts Command if possible. */ @@ -3025,6 +3052,7 @@ static int BusLogic_AbortCommand(struct scsi_cmnd *Command) return SUCCESS; } +#endif /* BusLogic_ResetHostAdapter resets Host Adapter if possible, marking all currently executing SCSI Commands as having been Reset. diff --git a/drivers/scsi/BusLogic.h b/drivers/scsi/BusLogic.h index 1aaa6569eda..9792e5af525 100644 --- a/drivers/scsi/BusLogic.h +++ b/drivers/scsi/BusLogic.h @@ -28,7 +28,6 @@ #ifndef _BUSLOGIC_H #define _BUSLOGIC_H -#include <linux/config.h> #ifndef PACKED #define PACKED __attribute__((packed)) diff --git a/drivers/scsi/FlashPoint.c b/drivers/scsi/FlashPoint.c index 8e3d949b711..7c006804958 100644 --- a/drivers/scsi/FlashPoint.c +++ b/drivers/scsi/FlashPoint.c @@ -15,7 +15,6 @@ */ -#include <linux/config.h> #ifndef CONFIG_SCSI_OMIT_FLASHPOINT diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 44728ae3fe7..c4dfcc91ddd 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -27,6 +27,11 @@ config SCSI However, do not compile this as a module if your root file system (the one containing the directory /) is located on a SCSI device. +config SCSI_NETLINK + bool + default n + select NET + config SCSI_PROC_FS bool "legacy /proc/scsi/ support" depends on SCSI && PROC_FS @@ -209,7 +214,7 @@ config SCSI_LOGGING there should be no noticeable performance impact as long as you have logging turned off. -menu "SCSI Transport Attributes" +menu "SCSI Transports" depends on SCSI config SCSI_SPI_ATTRS @@ -222,6 +227,7 @@ config SCSI_SPI_ATTRS config SCSI_FC_ATTRS tristate "FiberChannel Transport Attributes" depends on SCSI + select SCSI_NETLINK help If you wish to export transport-specific information about each attached FiberChannel device to sysfs, say Y. @@ -242,6 +248,8 @@ config SCSI_SAS_ATTRS If you wish to export transport-specific information about each attached SAS device to sysfs, say Y. +source "drivers/scsi/libsas/Kconfig" + endmenu menu "SCSI low-level drivers" @@ -431,6 +439,7 @@ config SCSI_AIC7XXX_OLD module will be called aic7xxx_old. source "drivers/scsi/aic7xxx/Kconfig.aic79xx" +source "drivers/scsi/aic94xx/Kconfig" # All the I2O code and drivers do not seem to be 64bit safe. config SCSI_DPT_I2O @@ -469,68 +478,21 @@ config SCSI_IN2000 To compile this driver as a module, choose M here: the module will be called in2000. -source "drivers/scsi/megaraid/Kconfig.megaraid" - -config SCSI_SATA - tristate "Serial ATA (SATA) support" - depends on SCSI - help - This driver family supports Serial ATA host controllers - and devices. - - If unsure, say N. - -config SCSI_SATA_AHCI - tristate "AHCI SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for AHCI Serial ATA. - - If unsure, say N. - -config SCSI_SATA_SVW - tristate "ServerWorks Frodo / Apple K2 SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for Broadcom/Serverworks/Apple K2 - SATA support. - - If unsure, say N. - -config SCSI_ATA_PIIX - tristate "Intel PIIX/ICH SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for ICH5 Serial ATA. - If PATA support was enabled previously, this enables - support for select Intel PIIX/ICH PATA host controllers. - - If unsure, say N. - -config SCSI_SATA_MV - tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for the Marvell Serial ATA family. - Currently supports 88SX[56]0[48][01] chips. - - If unsure, say N. - -config SCSI_SATA_NV - tristate "NVIDIA SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL +config SCSI_ARCMSR + tristate "ARECA ARC11X0[PCI-X]/ARC12X0[PCI-EXPRESS] SATA-RAID support" + depends on PCI && SCSI help - This option enables support for NVIDIA Serial ATA. + This driver supports all of ARECA's SATA RAID controller cards. + This is an ARECA-maintained driver by Erich Chen. + If you have any problems, please mail to: < erich@areca.com.tw > + Areca supports Linux RAID config tools. - If unsure, say N. + < http://www.areca.com.tw > -config SCSI_PDC_ADMA - tristate "Pacific Digital ADMA support" - depends on SCSI_SATA && PCI - help - This option enables support for Pacific Digital ADMA controllers + To compile this driver as a module, choose M here: the + module will be called arcmsr (modprobe arcmsr). - If unsure, say N. +source "drivers/scsi/megaraid/Kconfig.megaraid" config SCSI_HPTIOP tristate "HighPoint RocketRAID 3xxx Controller support" @@ -542,83 +504,6 @@ config SCSI_HPTIOP To compile this driver as a module, choose M here; the module will be called hptiop. If unsure, say N. -config SCSI_SATA_QSTOR - tristate "Pacific Digital SATA QStor support" - depends on SCSI_SATA && PCI - help - This option enables support for Pacific Digital Serial ATA QStor. - - If unsure, say N. - -config SCSI_SATA_PROMISE - tristate "Promise SATA TX2/TX4 support" - depends on SCSI_SATA && PCI - help - This option enables support for Promise Serial ATA TX2/TX4. - - If unsure, say N. - -config SCSI_SATA_SX4 - tristate "Promise SATA SX4 support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for Promise Serial ATA SX4. - - If unsure, say N. - -config SCSI_SATA_SIL - tristate "Silicon Image SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for Silicon Image Serial ATA. - - If unsure, say N. - -config SCSI_SATA_SIL24 - tristate "Silicon Image 3124/3132 SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for Silicon Image 3124/3132 Serial ATA. - - If unsure, say N. - -config SCSI_SATA_SIS - tristate "SiS 964/180 SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for SiS Serial ATA 964/180. - - If unsure, say N. - -config SCSI_SATA_ULI - tristate "ULi Electronics SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for ULi Electronics SATA. - - If unsure, say N. - -config SCSI_SATA_VIA - tristate "VIA SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for VIA Serial ATA. - - If unsure, say N. - -config SCSI_SATA_VITESSE - tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. - - If unsure, say N. - -config SCSI_SATA_INTEL_COMBINED - bool - depends on IDE=y && !BLK_DEV_IDE_SATA && (SCSI_SATA_AHCI || SCSI_ATA_PIIX) - default y - config SCSI_BUSLOGIC tristate "BusLogic SCSI support" depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API @@ -1053,6 +938,13 @@ config 53C700_LE_ON_BE depends on SCSI_LASI700 default y +config SCSI_STEX + tristate "Promise SuperTrak EX Series support" + depends on PCI && SCSI + ---help--- + This driver supports Promise SuperTrak EX8350/8300/16350/16300 + Storage controllers. + config SCSI_SYM53C8XX_2 tristate "SYM53C8XX Version 2 SCSI support" depends on PCI && SCSI @@ -1169,7 +1061,7 @@ config SCSI_NCR_Q720 you do not have this SCSI card, so say N. config SCSI_NCR53C8XX_DEFAULT_TAGS - int " default tagged command queue depth" + int "default tagged command queue depth" depends on SCSI_ZALON || SCSI_NCR_Q720 default "8" ---help--- @@ -1195,7 +1087,7 @@ config SCSI_NCR53C8XX_DEFAULT_TAGS There is no safe option other than using good SCSI devices. config SCSI_NCR53C8XX_MAX_TAGS - int " maximum number of queued commands" + int "maximum number of queued commands" depends on SCSI_ZALON || SCSI_NCR_Q720 default "32" ---help--- @@ -1212,7 +1104,7 @@ config SCSI_NCR53C8XX_MAX_TAGS There is no safe option and the default answer is recommended. config SCSI_NCR53C8XX_SYNC - int " synchronous transfers frequency in MHz" + int "synchronous transfers frequency in MHz" depends on SCSI_ZALON || SCSI_NCR_Q720 default "20" ---help--- @@ -1246,7 +1138,7 @@ config SCSI_NCR53C8XX_SYNC terminations and SCSI conformant devices. config SCSI_NCR53C8XX_PROFILE - bool " enable profiling" + bool "enable profiling" depends on SCSI_ZALON || SCSI_NCR_Q720 help This option allows you to enable profiling information gathering. @@ -1257,7 +1149,7 @@ config SCSI_NCR53C8XX_PROFILE The normal answer therefore is N. config SCSI_NCR53C8XX_NO_DISCONNECT - bool " not allow targets to disconnect" + bool "not allow targets to disconnect" depends on (SCSI_ZALON || SCSI_NCR_Q720) && SCSI_NCR53C8XX_DEFAULT_TAGS=0 help This option is only provided for safety if you suspect some SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 84d546323dc..1ef951be7a5 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -32,8 +32,10 @@ obj-$(CONFIG_SCSI_SPI_ATTRS) += scsi_transport_spi.o obj-$(CONFIG_SCSI_FC_ATTRS) += scsi_transport_fc.o obj-$(CONFIG_SCSI_ISCSI_ATTRS) += scsi_transport_iscsi.o obj-$(CONFIG_SCSI_SAS_ATTRS) += scsi_transport_sas.o +obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas/ obj-$(CONFIG_ISCSI_TCP) += libiscsi.o iscsi_tcp.o +obj-$(CONFIG_INFINIBAND_ISER) += libiscsi.o obj-$(CONFIG_SCSI_AMIGA7XX) += amiga7xx.o 53c7xx.o obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o @@ -58,6 +60,7 @@ obj-$(CONFIG_SCSI_PSI240I) += psi240i.o obj-$(CONFIG_SCSI_BUSLOGIC) += BusLogic.o obj-$(CONFIG_SCSI_DPT_I2O) += dpt_i2o.o obj-$(CONFIG_SCSI_U14_34F) += u14-34f.o +obj-$(CONFIG_SCSI_ARCMSR) += arcmsr/ obj-$(CONFIG_SCSI_ULTRASTOR) += ultrastor.o obj-$(CONFIG_SCSI_AHA152X) += aha152x.o obj-$(CONFIG_SCSI_AHA1542) += aha1542.o @@ -66,6 +69,7 @@ obj-$(CONFIG_SCSI_AIC7XXX) += aic7xxx/ obj-$(CONFIG_SCSI_AIC79XX) += aic7xxx/ obj-$(CONFIG_SCSI_AACRAID) += aacraid/ obj-$(CONFIG_SCSI_AIC7XXX_OLD) += aic7xxx_old.o +obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/ obj-$(CONFIG_SCSI_IPS) += ips.o obj-$(CONFIG_SCSI_FD_MCS) += fd_mcs.o obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o @@ -121,22 +125,8 @@ obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o obj-$(CONFIG_SCSI_NSP32) += nsp32.o obj-$(CONFIG_SCSI_IPR) += ipr.o obj-$(CONFIG_SCSI_IBMVSCSI) += ibmvscsi/ -obj-$(CONFIG_SCSI_SATA_AHCI) += libata.o ahci.o -obj-$(CONFIG_SCSI_SATA_SVW) += libata.o sata_svw.o -obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o -obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o -obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o -obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o -obj-$(CONFIG_SCSI_SATA_SIL24) += libata.o sata_sil24.o -obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o -obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o -obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o -obj-$(CONFIG_SCSI_SATA_SX4) += libata.o sata_sx4.o -obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o -obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o -obj-$(CONFIG_SCSI_SATA_MV) += libata.o sata_mv.o -obj-$(CONFIG_SCSI_PDC_ADMA) += libata.o pdc_adma.o obj-$(CONFIG_SCSI_HPTIOP) += hptiop.o +obj-$(CONFIG_SCSI_STEX) += stex.o obj-$(CONFIG_ARM) += arm/ @@ -154,6 +144,7 @@ scsi_mod-y += scsi.o hosts.o scsi_ioctl.o constants.o \ scsicam.o scsi_error.o scsi_lib.o \ scsi_scan.o scsi_sysfs.o \ scsi_devinfo.o +scsi_mod-$(CONFIG_SCSI_NETLINK) += scsi_netlink.o scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o @@ -165,7 +156,6 @@ ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \ CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m) zalon7xx-objs := zalon.o ncr53c8xx.o NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o -libata-objs := libata-core.o libata-scsi.o libata-bmdma.o libata-eh.o oktagon_esp_mod-objs := oktagon_esp.o oktagon_io.o # Files generated that shall be removed upon make clean diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index fa57e0b4a5f..616810ad17d 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -500,7 +500,7 @@ static void NCR5380_print_phase(struct Scsi_Host *instance) /* * Function : int should_disconnect (unsigned char cmd) * - * Purpose : decide weather a command would normally disconnect or + * Purpose : decide whether a command would normally disconnect or * not, since if it won't disconnect we should go to sleep. * * Input : cmd - opcode of SCSI command @@ -585,7 +585,7 @@ static int __init NCR5380_probe_irq(struct Scsi_Host *instance, int possible) NCR5380_setup(instance); for (trying_irqs = i = 0, mask = 1; i < 16; ++i, mask <<= 1) - if ((mask & possible) && (request_irq(i, &probe_intr, SA_INTERRUPT, "NCR-probe", NULL) == 0)) + if ((mask & possible) && (request_irq(i, &probe_intr, IRQF_DISABLED, "NCR-probe", NULL) == 0)) trying_irqs |= mask; timeout = jiffies + (250 * HZ / 1000); diff --git a/drivers/scsi/NCR53C9x.c b/drivers/scsi/NCR53C9x.c index c7dd0154d01..bdc6bb262bc 100644 --- a/drivers/scsi/NCR53C9x.c +++ b/drivers/scsi/NCR53C9x.c @@ -23,7 +23,6 @@ #include <linux/module.h> -#include <linux/config.h> #include <linux/kernel.h> #include <linux/delay.h> #include <linux/types.h> @@ -912,7 +911,7 @@ static void esp_get_dmabufs(struct NCR_ESP *esp, Scsi_Cmnd *sp) sp->SCp.ptr = (char *) virt_to_phys(sp->request_buffer); } else { - sp->SCp.buffer = (struct scatterlist *) sp->buffer; + sp->SCp.buffer = (struct scatterlist *) sp->request_buffer; sp->SCp.buffers_residual = sp->use_sg - 1; sp->SCp.this_residual = sp->SCp.buffer->length; if (esp->dma_mmu_get_scsi_sgl) @@ -2153,29 +2152,23 @@ static int esp_do_data_finale(struct NCR_ESP *esp, */ static int esp_should_clear_sync(Scsi_Cmnd *sp) { - unchar cmd1 = sp->cmnd[0]; - unchar cmd2 = sp->data_cmnd[0]; + unchar cmd = sp->cmnd[0]; /* These cases are for spinning up a disk and * waiting for that spinup to complete. */ - if(cmd1 == START_STOP || - cmd2 == START_STOP) + if(cmd == START_STOP) return 0; - if(cmd1 == TEST_UNIT_READY || - cmd2 == TEST_UNIT_READY) + if(cmd == TEST_UNIT_READY) return 0; /* One more special case for SCSI tape drives, * this is what is used to probe the device for * completion of a rewind or tape load operation. */ - if(sp->device->type == TYPE_TAPE) { - if(cmd1 == MODE_SENSE || - cmd2 == MODE_SENSE) - return 0; - } + if(sp->device->type == TYPE_TAPE && cmd == MODE_SENSE) + return 0; return 1; } diff --git a/drivers/scsi/NCR53C9x.h b/drivers/scsi/NCR53C9x.h index 65a9b377a41..481653c977c 100644 --- a/drivers/scsi/NCR53C9x.h +++ b/drivers/scsi/NCR53C9x.h @@ -13,7 +13,6 @@ #ifndef NCR53C9X_H #define NCR53C9X_H -#include <linux/config.h> #include <linux/interrupt.h> /* djweis for mac driver */ diff --git a/drivers/scsi/NCR_D700.c b/drivers/scsi/NCR_D700.c index 577e6349977..d05681f9d81 100644 --- a/drivers/scsi/NCR_D700.c +++ b/drivers/scsi/NCR_D700.c @@ -114,7 +114,7 @@ MODULE_DESCRIPTION("NCR Dual700 SCSI Driver"); MODULE_LICENSE("GPL"); module_param(NCR_D700, charp, 0); -static __u8 __initdata id_array[2*(MCA_MAX_SLOT_NR + 1)] = +static __u8 __devinitdata id_array[2*(MCA_MAX_SLOT_NR + 1)] = { [0 ... 2*(MCA_MAX_SLOT_NR + 1)-1] = 7 }; #ifdef MODULE @@ -173,7 +173,7 @@ struct NCR_D700_private { char pad; }; -static int +static int __devinit NCR_D700_probe_one(struct NCR_D700_private *p, int siop, int irq, int slot, u32 region, int differential) { @@ -243,7 +243,7 @@ NCR_D700_intr(int irq, void *data, struct pt_regs *regs) * essentially connectecd to the MCA bus independently, it is easier * to set them up as two separate host adapters, rather than one * adapter with two channels */ -static int +static int __devinit NCR_D700_probe(struct device *dev) { struct NCR_D700_private *p; @@ -320,7 +320,7 @@ NCR_D700_probe(struct device *dev) memset(p, '\0', sizeof(*p)); p->dev = dev; snprintf(p->name, sizeof(p->name), "D700(%s)", dev->bus_id); - if (request_irq(irq, NCR_D700_intr, SA_SHIRQ, p->name, p)) { + if (request_irq(irq, NCR_D700_intr, IRQF_SHARED, p->name, p)) { printk(KERN_ERR "D700: request_irq failed\n"); kfree(p); return -EBUSY; @@ -329,7 +329,7 @@ NCR_D700_probe(struct device *dev) for (i = 0; i < 2; i++) { int err; - if ((err = NCR_D700_probe_one(p, i, slot, irq, + if ((err = NCR_D700_probe_one(p, i, irq, slot, offset_addr + (0x80 * i), differential)) != 0) printk("D700: SIOP%d: probe failed, error = %d\n", @@ -349,7 +349,7 @@ NCR_D700_probe(struct device *dev) return 0; } -static void +static void __devexit NCR_D700_remove_one(struct Scsi_Host *host) { scsi_remove_host(host); @@ -359,7 +359,7 @@ NCR_D700_remove_one(struct Scsi_Host *host) release_region(host->base, 64); } -static int +static int __devexit NCR_D700_remove(struct device *dev) { struct NCR_D700_private *p = dev_get_drvdata(dev); @@ -380,7 +380,7 @@ static struct mca_driver NCR_D700_driver = { .name = "NCR_D700", .bus = &mca_bus_type, .probe = NCR_D700_probe, - .remove = NCR_D700_remove, + .remove = __devexit_p(NCR_D700_remove), }, }; diff --git a/drivers/scsi/NCR_Q720.c b/drivers/scsi/NCR_Q720.c index 9d18ec90510..c39ffbb86e3 100644 --- a/drivers/scsi/NCR_Q720.c +++ b/drivers/scsi/NCR_Q720.c @@ -265,7 +265,7 @@ NCR_Q720_probe(struct device *dev) p->irq = irq; p->siops = siops; - if (request_irq(irq, NCR_Q720_intr, SA_SHIRQ, "NCR_Q720", p)) { + if (request_irq(irq, NCR_Q720_intr, IRQF_SHARED, "NCR_Q720", p)) { printk(KERN_ERR "NCR_Q720: request irq %d failed\n", irq); goto out_release; } diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c index 3dce21c7873..d7e9fab54c6 100644 --- a/drivers/scsi/a100u2w.c +++ b/drivers/scsi/a100u2w.c @@ -1120,7 +1120,7 @@ static int __devinit inia100_probe_one(struct pci_dev *pdev, shost->sg_tablesize = TOTAL_SG_ENTRY; /* Initial orc chip */ - error = request_irq(pdev->irq, inia100_intr, SA_SHIRQ, + error = request_irq(pdev->irq, inia100_intr, IRQF_SHARED, "inia100", shost); if (error < 0) { printk(KERN_WARNING "inia100: unable to get irq %d\n", diff --git a/drivers/scsi/a2091.c b/drivers/scsi/a2091.c index 54996eaae97..08540692860 100644 --- a/drivers/scsi/a2091.c +++ b/drivers/scsi/a2091.c @@ -40,7 +40,7 @@ static irqreturn_t a2091_intr (int irq, void *_instance, struct pt_regs *fp) return IRQ_HANDLED; } -static int dma_setup (Scsi_Cmnd *cmd, int dir_in) +static int dma_setup(struct scsi_cmnd *cmd, int dir_in) { unsigned short cntr = CNTR_PDMD | CNTR_INTEN; unsigned long addr = virt_to_bus(cmd->SCp.ptr); @@ -115,7 +115,7 @@ static int dma_setup (Scsi_Cmnd *cmd, int dir_in) return 0; } -static void dma_stop (struct Scsi_Host *instance, Scsi_Cmnd *SCpnt, +static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, int status) { /* disable SCSI interrupts */ @@ -208,7 +208,7 @@ int __init a2091_detect(struct scsi_host_template *tpnt) regs.SASR = &(DMA(instance)->SASR); regs.SCMD = &(DMA(instance)->SCMD); wd33c93_init(instance, regs, dma_setup, dma_stop, WD33C93_FS_8_10); - request_irq(IRQ_AMIGA_PORTS, a2091_intr, SA_SHIRQ, "A2091 SCSI", + request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED, "A2091 SCSI", instance); DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN; num_a2091++; @@ -217,7 +217,7 @@ int __init a2091_detect(struct scsi_host_template *tpnt) return num_a2091; } -static int a2091_bus_reset(Scsi_Cmnd *cmd) +static int a2091_bus_reset(struct scsi_cmnd *cmd) { /* FIXME perform bus-specific reset */ diff --git a/drivers/scsi/a2091.h b/drivers/scsi/a2091.h index 22d6a13dd8b..fe809bc88d7 100644 --- a/drivers/scsi/a2091.h +++ b/drivers/scsi/a2091.h @@ -13,10 +13,6 @@ int a2091_detect(struct scsi_host_template *); int a2091_release(struct Scsi_Host *); -const char *wd33c93_info(void); -int wd33c93_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *)); -int wd33c93_abort(Scsi_Cmnd *); -int wd33c93_reset(Scsi_Cmnd *, unsigned int); #ifndef CMD_PER_LUN #define CMD_PER_LUN 2 diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c index f425d424bf0..7bf46d40b56 100644 --- a/drivers/scsi/a3000.c +++ b/drivers/scsi/a3000.c @@ -44,7 +44,7 @@ static irqreturn_t a3000_intr (int irq, void *dummy, struct pt_regs *fp) return IRQ_NONE; } -static int dma_setup (Scsi_Cmnd *cmd, int dir_in) +static int dma_setup(struct scsi_cmnd *cmd, int dir_in) { unsigned short cntr = CNTR_PDMD | CNTR_INTEN; unsigned long addr = virt_to_bus(cmd->SCp.ptr); @@ -110,8 +110,8 @@ static int dma_setup (Scsi_Cmnd *cmd, int dir_in) return 0; } -static void dma_stop (struct Scsi_Host *instance, Scsi_Cmnd *SCpnt, - int status) +static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, + int status) { /* disable SCSI interrupts */ unsigned short cntr = CNTR_PDMD; @@ -190,7 +190,7 @@ int __init a3000_detect(struct scsi_host_template *tpnt) regs.SASR = &(DMA(a3000_host)->SASR); regs.SCMD = &(DMA(a3000_host)->SCMD); wd33c93_init(a3000_host, regs, dma_setup, dma_stop, WD33C93_FS_12_15); - if (request_irq(IRQ_AMIGA_PORTS, a3000_intr, SA_SHIRQ, "A3000 SCSI", + if (request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED, "A3000 SCSI", a3000_intr)) goto fail_irq; DMA(a3000_host)->CNTR = CNTR_PDMD | CNTR_INTEN; @@ -205,7 +205,7 @@ fail_register: return 0; } -static int a3000_bus_reset(Scsi_Cmnd *cmd) +static int a3000_bus_reset(struct scsi_cmnd *cmd) { /* FIXME perform bus-specific reset */ diff --git a/drivers/scsi/a3000.h b/drivers/scsi/a3000.h index 5535a65150a..44a4ec7b465 100644 --- a/drivers/scsi/a3000.h +++ b/drivers/scsi/a3000.h @@ -13,10 +13,6 @@ int a3000_detect(struct scsi_host_template *); int a3000_release(struct Scsi_Host *); -const char *wd33c93_info(void); -int wd33c93_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *)); -int wd33c93_abort(Scsi_Cmnd *); -int wd33c93_reset(Scsi_Cmnd *, unsigned int); #ifndef CMD_PER_LUN #define CMD_PER_LUN 2 diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 83b5c7d085f..ac108f9e267 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -169,13 +169,17 @@ MODULE_PARM_DESC(numacb, "Request a limit to the number of adapter control block int acbsize = -1; module_param(acbsize, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(acbsize, "Request a specific adapter control block (FIB) size. Valid values are 512, 2048, 4096 and 8192. Default is to use suggestion from Firmware."); + +int expose_physicals = 0; +module_param(expose_physicals, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(expose_physicals, "Expose physical components of the arrays. 0=off, 1=on"); /** * aac_get_config_status - check the adapter configuration * @common: adapter to query * * Query config status, and commit the configuration if needed. */ -int aac_get_config_status(struct aac_dev *dev) +int aac_get_config_status(struct aac_dev *dev, int commit_flag) { int status = 0; struct fib * fibptr; @@ -219,7 +223,7 @@ int aac_get_config_status(struct aac_dev *dev) aac_fib_complete(fibptr); /* Send a CT_COMMIT_CONFIG to enable discovery of devices */ if (status >= 0) { - if (commit == 1) { + if ((commit == 1) || commit_flag) { struct aac_commit_config * dinfo; aac_fib_init(fibptr); dinfo = (struct aac_commit_config *) fib_data(fibptr); @@ -489,6 +493,8 @@ int aac_probe_container(struct aac_dev *dev, int cid) unsigned instance; fsa_dev_ptr = dev->fsa_dev; + if (!fsa_dev_ptr) + return -ENOMEM; instance = dev->scsi_host_ptr->unique_id; if (!(fibptr = aac_fib_alloc(dev))) @@ -782,8 +788,9 @@ int aac_get_adapter_info(struct aac_dev* dev) dev->maximum_num_channels = le32_to_cpu(bus_info->BusCount); } - tmp = le32_to_cpu(dev->adapter_info.kernelrev); - printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d] %.*s\n", + if (!dev->in_reset) { + tmp = le32_to_cpu(dev->adapter_info.kernelrev); + printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d] %.*s\n", dev->name, dev->id, tmp>>24, @@ -792,20 +799,21 @@ int aac_get_adapter_info(struct aac_dev* dev) le32_to_cpu(dev->adapter_info.kernelbuild), (int)sizeof(dev->supplement_adapter_info.BuildDate), dev->supplement_adapter_info.BuildDate); - tmp = le32_to_cpu(dev->adapter_info.monitorrev); - printk(KERN_INFO "%s%d: monitor %d.%d-%d[%d]\n", + tmp = le32_to_cpu(dev->adapter_info.monitorrev); + printk(KERN_INFO "%s%d: monitor %d.%d-%d[%d]\n", dev->name, dev->id, tmp>>24,(tmp>>16)&0xff,tmp&0xff, le32_to_cpu(dev->adapter_info.monitorbuild)); - tmp = le32_to_cpu(dev->adapter_info.biosrev); - printk(KERN_INFO "%s%d: bios %d.%d-%d[%d]\n", + tmp = le32_to_cpu(dev->adapter_info.biosrev); + printk(KERN_INFO "%s%d: bios %d.%d-%d[%d]\n", dev->name, dev->id, tmp>>24,(tmp>>16)&0xff,tmp&0xff, le32_to_cpu(dev->adapter_info.biosbuild)); - if (le32_to_cpu(dev->adapter_info.serial[0]) != 0xBAD0) - printk(KERN_INFO "%s%d: serial %x\n", - dev->name, dev->id, - le32_to_cpu(dev->adapter_info.serial[0])); + if (le32_to_cpu(dev->adapter_info.serial[0]) != 0xBAD0) + printk(KERN_INFO "%s%d: serial %x\n", + dev->name, dev->id, + le32_to_cpu(dev->adapter_info.serial[0])); + } dev->nondasd_support = 0; dev->raid_scsi_mode = 0; @@ -1392,6 +1400,7 @@ static int aac_synchronize(struct scsi_cmnd *scsicmd, int cid) struct scsi_cmnd *cmd; struct scsi_device *sdev = scsicmd->device; int active = 0; + struct aac_dev *aac; unsigned long flags; /* @@ -1413,11 +1422,14 @@ static int aac_synchronize(struct scsi_cmnd *scsicmd, int cid) if (active) return SCSI_MLQUEUE_DEVICE_BUSY; + aac = (struct aac_dev *)scsicmd->device->host->hostdata; + if (aac->in_reset) + return SCSI_MLQUEUE_HOST_BUSY; + /* * Allocate and initialize a Fib */ - if (!(cmd_fibcontext = - aac_fib_alloc((struct aac_dev *)scsicmd->device->host->hostdata))) + if (!(cmd_fibcontext = aac_fib_alloc(aac))) return SCSI_MLQUEUE_HOST_BUSY; aac_fib_init(cmd_fibcontext); @@ -1470,6 +1482,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) struct aac_dev *dev = (struct aac_dev *)host->hostdata; struct fsa_dev_info *fsa_dev_ptr = dev->fsa_dev; + if (fsa_dev_ptr == NULL) + return -1; /* * If the bus, id or lun is out of range, return fail * Test does not apply to ID 16, the pseudo id for the controller @@ -1499,6 +1513,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) case INQUIRY: case READ_CAPACITY: case TEST_UNIT_READY: + if (dev->in_reset) + return -1; spin_unlock_irq(host->host_lock); aac_probe_container(dev, cid); if ((fsa_dev_ptr[cid].valid & 1) == 0) @@ -1523,7 +1539,9 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) return 0; } } else { /* check for physical non-dasd devices */ - if(dev->nondasd_support == 1){ + if ((dev->nondasd_support == 1) || expose_physicals) { + if (dev->in_reset) + return -1; return aac_send_srb_fib(scsicmd); } else { scsicmd->result = DID_NO_CONNECT << 16; @@ -1579,6 +1597,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) scsicmd->scsi_done(scsicmd); return 0; } + if (dev->in_reset) + return -1; setinqstr(dev, (void *) (inq_data.inqd_vid), fsa_dev_ptr[cid].type); inq_data.inqd_pdt = INQD_PDT_DA; /* Direct/random access device */ aac_internal_transfer(scsicmd, &inq_data, 0, sizeof(inq_data)); @@ -1734,6 +1754,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) case READ_10: case READ_12: case READ_16: + if (dev->in_reset) + return -1; /* * Hack to keep track of ordinal number of the device that * corresponds to a container. Needed to convert @@ -1752,6 +1774,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) case WRITE_10: case WRITE_12: case WRITE_16: + if (dev->in_reset) + return -1; return aac_write(scsicmd, cid); case SYNCHRONIZE_CACHE: @@ -1782,6 +1806,8 @@ static int query_disk(struct aac_dev *dev, void __user *arg) struct fsa_dev_info *fsa_dev_ptr; fsa_dev_ptr = dev->fsa_dev; + if (!fsa_dev_ptr) + return -EBUSY; if (copy_from_user(&qd, arg, sizeof (struct aac_query_disk))) return -EFAULT; if (qd.cnum == -1) @@ -1820,6 +1846,8 @@ static int force_delete_disk(struct aac_dev *dev, void __user *arg) struct fsa_dev_info *fsa_dev_ptr; fsa_dev_ptr = dev->fsa_dev; + if (!fsa_dev_ptr) + return -EBUSY; if (copy_from_user(&dd, arg, sizeof (struct aac_delete_disk))) return -EFAULT; @@ -1843,6 +1871,8 @@ static int delete_disk(struct aac_dev *dev, void __user *arg) struct fsa_dev_info *fsa_dev_ptr; fsa_dev_ptr = dev->fsa_dev; + if (!fsa_dev_ptr) + return -EBUSY; if (copy_from_user(&dd, arg, sizeof (struct aac_delete_disk))) return -EFAULT; diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index d0eecd4bec8..eb3ed91bac7 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -494,6 +494,7 @@ struct adapter_ops int (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4); int (*adapter_check_health)(struct aac_dev *dev); int (*adapter_send)(struct fib * fib); + int (*adapter_ioremap)(struct aac_dev * dev, u32 size); }; /* @@ -682,14 +683,6 @@ struct rx_inbound { __le32 Mailbox[8]; }; -#define InboundMailbox0 IndexRegs.Mailbox[0] -#define InboundMailbox1 IndexRegs.Mailbox[1] -#define InboundMailbox2 IndexRegs.Mailbox[2] -#define InboundMailbox3 IndexRegs.Mailbox[3] -#define InboundMailbox4 IndexRegs.Mailbox[4] -#define InboundMailbox5 IndexRegs.Mailbox[5] -#define InboundMailbox6 IndexRegs.Mailbox[6] - #define INBOUNDDOORBELL_0 0x00000001 #define INBOUNDDOORBELL_1 0x00000002 #define INBOUNDDOORBELL_2 0x00000004 @@ -1010,6 +1003,8 @@ struct aac_dev struct rx_registers __iomem *rx; struct rkt_registers __iomem *rkt; } regs; + volatile void __iomem *base; + volatile struct rx_inbound __iomem *IndexRegs; u32 OIMR; /* Mask Register Cache */ /* * AIF thread states @@ -1029,6 +1024,7 @@ struct aac_dev init->InitStructRevision==cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4) u8 raw_io_64; u8 printf_enabled; + u8 in_reset; }; #define aac_adapter_interrupt(dev) \ @@ -1049,6 +1045,9 @@ struct aac_dev #define aac_adapter_send(fib) \ ((fib)->dev)->a_ops.adapter_send(fib) +#define aac_adapter_ioremap(dev, size) \ + (dev)->a_ops.adapter_ioremap(dev, size) + #define FIB_CONTEXT_FLAG_TIMED_OUT (0x00000001) /* @@ -1524,7 +1523,6 @@ struct aac_get_name { __le32 count; /* sizeof(((struct aac_get_name_resp *)NULL)->data) */ }; -#define CT_OK 218 struct aac_get_name_resp { __le32 dummy0; __le32 dummy1; @@ -1670,6 +1668,7 @@ extern struct aac_common aac_config; #define RCV_TEMP_READINGS 0x00000025 #define GET_COMM_PREFERRED_SETTINGS 0x00000026 #define IOP_RESET 0x00001000 +#define IOP_RESET_ALWAYS 0x00001001 #define RE_INIT_ADAPTER 0x000000ee /* @@ -1788,7 +1787,7 @@ void aac_consumer_free(struct aac_dev * dev, struct aac_queue * q, u32 qnum); int aac_fib_complete(struct fib * context); #define fib_data(fibctx) ((void *)(fibctx)->hw_fib->data) struct aac_dev *aac_init_adapter(struct aac_dev *dev); -int aac_get_config_status(struct aac_dev *dev); +int aac_get_config_status(struct aac_dev *dev, int commit_flag); int aac_get_containers(struct aac_dev *dev); int aac_scsi_cmd(struct scsi_cmnd *cmd); int aac_dev_ioctl(struct aac_dev *dev, int cmd, void __user *arg); @@ -1799,6 +1798,7 @@ int aac_sa_init(struct aac_dev *dev); unsigned int aac_response_normal(struct aac_queue * q); unsigned int aac_command_normal(struct aac_queue * q); unsigned int aac_intr_normal(struct aac_dev * dev, u32 Index); +int aac_check_health(struct aac_dev * dev); int aac_command_thread(void *data); int aac_close_fib_context(struct aac_dev * dev, struct aac_fib_context *fibctx); int aac_fib_adapter_complete(struct fib * fibptr, unsigned short size); diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c index 255421de9d1..da1d3a9212f 100644 --- a/drivers/scsi/aacraid/commctrl.c +++ b/drivers/scsi/aacraid/commctrl.c @@ -38,7 +38,7 @@ #include <linux/completion.h> #include <linux/dma-mapping.h> #include <linux/blkdev.h> -#include <linux/delay.h> +#include <linux/delay.h> /* ssleep prototype */ #include <linux/kthread.h> #include <asm/semaphore.h> #include <asm/uaccess.h> @@ -140,7 +140,8 @@ cleanup: fibptr->hw_fib_pa = hw_fib_pa; fibptr->hw_fib = hw_fib; } - aac_fib_free(fibptr); + if (retval != -EINTR) + aac_fib_free(fibptr); return retval; } @@ -297,7 +298,7 @@ return_fib: spin_unlock_irqrestore(&dev->fib_lock, flags); /* If someone killed the AIF aacraid thread, restart it */ status = !dev->aif_thread; - if (status && dev->queues && dev->fsa_dev) { + if (status && !dev->in_reset && dev->queues && dev->fsa_dev) { /* Be paranoid, be very paranoid! */ kthread_stop(dev->thread); ssleep(1); @@ -621,7 +622,13 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) actual_fibsize = sizeof (struct aac_srb) + (((user_srbcmd->sg.count & 0xff) - 1) * sizeof (struct sgentry)); if(actual_fibsize != fibsize){ // User made a mistake - should not continue - dprintk((KERN_DEBUG"aacraid: Bad Size specified in Raw SRB command\n")); + dprintk((KERN_DEBUG"aacraid: Bad Size specified in " + "Raw SRB command calculated fibsize=%d " + "user_srbcmd->sg.count=%d aac_srb=%d sgentry=%d " + "issued fibsize=%d\n", + actual_fibsize, user_srbcmd->sg.count, + sizeof(struct aac_srb), sizeof(struct sgentry), + fibsize)); rcode = -EINVAL; goto cleanup; } @@ -663,6 +670,10 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) psg->count = cpu_to_le32(sg_indx+1); status = aac_fib_send(ScsiPortCommand, srbfib, actual_fibsize, FsaNormal, 1, 1, NULL, NULL); } + if (status == -EINTR) { + rcode = -EINTR; + goto cleanup; + } if (status != 0){ dprintk((KERN_DEBUG"aacraid: Could not send raw srb fib to hba\n")); @@ -696,8 +707,10 @@ cleanup: for(i=0; i <= sg_indx; i++){ kfree(sg_list[i]); } - aac_fib_complete(srbfib); - aac_fib_free(srbfib); + if (rcode != -EINTR) { + aac_fib_complete(srbfib); + aac_fib_free(srbfib); + } return rcode; } diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c index 35b0a6ebd3f..d5cf8b91a0e 100644 --- a/drivers/scsi/aacraid/comminit.c +++ b/drivers/scsi/aacraid/comminit.c @@ -92,28 +92,7 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co init->AdapterFibsPhysicalAddress = cpu_to_le32((u32)phys); init->AdapterFibsSize = cpu_to_le32(fibsize); init->AdapterFibAlign = cpu_to_le32(sizeof(struct hw_fib)); - /* - * number of 4k pages of host physical memory. The aacraid fw needs - * this number to be less than 4gb worth of pages. num_physpages is in - * system page units. New firmware doesn't have any issues with the - * mapping system, but older Firmware did, and had *troubles* dealing - * with the math overloading past 32 bits, thus we must limit this - * field. - * - * This assumes the memory is mapped zero->n, which isnt - * always true on real computers. It also has some slight problems - * with the GART on x86-64. I've btw never tried DMA from PCI space - * on this platform but don't be surprised if its problematic. - */ -#ifndef CONFIG_GART_IOMMU - if ((num_physpages << (PAGE_SHIFT - 12)) <= AAC_MAX_HOSTPHYSMEMPAGES) { - init->HostPhysMemPages = - cpu_to_le32(num_physpages << (PAGE_SHIFT-12)); - } else -#endif - { - init->HostPhysMemPages = cpu_to_le32(AAC_MAX_HOSTPHYSMEMPAGES); - } + init->HostPhysMemPages = cpu_to_le32(AAC_MAX_HOSTPHYSMEMPAGES); init->InitFlags = 0; if (dev->new_comm_interface) { @@ -201,7 +180,7 @@ int aac_send_shutdown(struct aac_dev * dev) -2 /* Timeout silently */, 1, NULL, NULL); - if (status == 0) + if (status >= 0) aac_fib_complete(fibctx); aac_fib_free(fibctx); return status; @@ -328,17 +307,12 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev) if (status[1] & AAC_OPT_NEW_COMM) dev->new_comm_interface = dev->a_ops.adapter_send != 0; if (dev->new_comm_interface && (status[2] > dev->base_size)) { - iounmap(dev->regs.sa); + aac_adapter_ioremap(dev, 0); dev->base_size = status[2]; - dprintk((KERN_DEBUG "ioremap(%lx,%d)\n", - host->base, status[2])); - dev->regs.sa = ioremap(host->base, status[2]); - if (dev->regs.sa == NULL) { + if (aac_adapter_ioremap(dev, status[2])) { /* remap failed, go back ... */ dev->new_comm_interface = 0; - dev->regs.sa = ioremap(host->base, - AAC_MIN_FOOTPRINT_SIZE); - if (dev->regs.sa == NULL) { + if (aac_adapter_ioremap(dev, AAC_MIN_FOOTPRINT_SIZE)) { printk(KERN_WARNING "aacraid: unable to map adapter.\n"); return NULL; diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index 3f27419c66a..19e42ac07cb 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -40,8 +40,11 @@ #include <linux/blkdev.h> #include <linux/delay.h> #include <linux/kthread.h> +#include <linux/interrupt.h> +#include <scsi/scsi.h> #include <scsi/scsi_host.h> #include <scsi/scsi_device.h> +#include <scsi/scsi_cmnd.h> #include <asm/semaphore.h> #include "aacraid.h" @@ -464,6 +467,8 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, dprintk((KERN_DEBUG " hw_fib pa being sent=%lx\n",(ulong)fibptr->hw_fib_pa)); dprintk((KERN_DEBUG " fib being sent=%p\n",fibptr)); + if (!dev->queues) + return -EBUSY; q = &dev->queues->queue[AdapNormCmdQueue]; if(wait) @@ -527,8 +532,15 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, } udelay(5); } - } else - down(&fibptr->event_wait); + } else if (down_interruptible(&fibptr->event_wait)) { + spin_lock_irqsave(&fibptr->event_lock, flags); + if (fibptr->done == 0) { + fibptr->done = 2; /* Tell interrupt we aborted */ + spin_unlock_irqrestore(&fibptr->event_lock, flags); + return -EINTR; + } + spin_unlock_irqrestore(&fibptr->event_lock, flags); + } BUG_ON(fibptr->done == 0); if((fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT)){ @@ -795,7 +807,7 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) /* Sniff for container changes */ - if (!dev) + if (!dev || !dev->fsa_dev) return; container = (u32)-1; @@ -1022,13 +1034,7 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) if (device) { switch (device_config_needed) { case DELETE: - scsi_remove_device(device); - break; case CHANGE: - if (!dev->fsa_dev[container].valid) { - scsi_remove_device(device); - break; - } scsi_rescan_device(&device->sdev_gendev); default: @@ -1045,6 +1051,262 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) } +static int _aac_reset_adapter(struct aac_dev *aac) +{ + int index, quirks; + u32 ret; + int retval; + struct Scsi_Host *host; + struct scsi_device *dev; + struct scsi_cmnd *command; + struct scsi_cmnd *command_list; + + /* + * Assumptions: + * - host is locked. + * - in_reset is asserted, so no new i/o is getting to the + * card. + * - The card is dead. + */ + host = aac->scsi_host_ptr; + scsi_block_requests(host); + aac_adapter_disable_int(aac); + spin_unlock_irq(host->host_lock); + kthread_stop(aac->thread); + + /* + * If a positive health, means in a known DEAD PANIC + * state and the adapter could be reset to `try again'. + */ + retval = aac_adapter_check_health(aac); + if (retval == 0) + retval = aac_adapter_sync_cmd(aac, IOP_RESET_ALWAYS, + 0, 0, 0, 0, 0, 0, &ret, NULL, NULL, NULL, NULL); + if (retval) + retval = aac_adapter_sync_cmd(aac, IOP_RESET, + 0, 0, 0, 0, 0, 0, &ret, NULL, NULL, NULL, NULL); + + if (retval) + goto out; + if (ret != 0x00000001) { + retval = -ENODEV; + goto out; + } + + index = aac->cardtype; + + /* + * Re-initialize the adapter, first free resources, then carefully + * apply the initialization sequence to come back again. Only risk + * is a change in Firmware dropping cache, it is assumed the caller + * will ensure that i/o is queisced and the card is flushed in that + * case. + */ + aac_fib_map_free(aac); + aac->hw_fib_va = NULL; + aac->hw_fib_pa = 0; + pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr, aac->comm_phys); + aac->comm_addr = NULL; + aac->comm_phys = 0; + kfree(aac->queues); + aac->queues = NULL; + free_irq(aac->pdev->irq, aac); + kfree(aac->fsa_dev); + aac->fsa_dev = NULL; + if (aac_get_driver_ident(index)->quirks & AAC_QUIRK_31BIT) { + if (((retval = pci_set_dma_mask(aac->pdev, DMA_32BIT_MASK))) || + ((retval = pci_set_consistent_dma_mask(aac->pdev, DMA_32BIT_MASK)))) + goto out; + } else { + if (((retval = pci_set_dma_mask(aac->pdev, 0x7FFFFFFFULL))) || + ((retval = pci_set_consistent_dma_mask(aac->pdev, 0x7FFFFFFFULL)))) + goto out; + } + if ((retval = (*(aac_get_driver_ident(index)->init))(aac))) + goto out; + if (aac_get_driver_ident(index)->quirks & AAC_QUIRK_31BIT) + if ((retval = pci_set_dma_mask(aac->pdev, DMA_32BIT_MASK))) + goto out; + aac->thread = kthread_run(aac_command_thread, aac, aac->name); + if (IS_ERR(aac->thread)) { + retval = PTR_ERR(aac->thread); + goto out; + } + (void)aac_get_adapter_info(aac); + quirks = aac_get_driver_ident(index)->quirks; + if ((quirks & AAC_QUIRK_34SG) && (host->sg_tablesize > 34)) { + host->sg_tablesize = 34; + host->max_sectors = (host->sg_tablesize * 8) + 112; + } + if ((quirks & AAC_QUIRK_17SG) && (host->sg_tablesize > 17)) { + host->sg_tablesize = 17; + host->max_sectors = (host->sg_tablesize * 8) + 112; + } + aac_get_config_status(aac, 1); + aac_get_containers(aac); + /* + * This is where the assumption that the Adapter is quiesced + * is important. + */ + command_list = NULL; + __shost_for_each_device(dev, host) { + unsigned long flags; + spin_lock_irqsave(&dev->list_lock, flags); + list_for_each_entry(command, &dev->cmd_list, list) + if (command->SCp.phase == AAC_OWNER_FIRMWARE) { + command->SCp.buffer = (struct scatterlist *)command_list; + command_list = command; + } + spin_unlock_irqrestore(&dev->list_lock, flags); + } + while ((command = command_list)) { + command_list = (struct scsi_cmnd *)command->SCp.buffer; + command->SCp.buffer = NULL; + command->result = DID_OK << 16 + | COMMAND_COMPLETE << 8 + | SAM_STAT_TASK_SET_FULL; + command->SCp.phase = AAC_OWNER_ERROR_HANDLER; + command->scsi_done(command); + } + retval = 0; + +out: + aac->in_reset = 0; + scsi_unblock_requests(host); + spin_lock_irq(host->host_lock); + return retval; +} + +int aac_check_health(struct aac_dev * aac) +{ + int BlinkLED; + unsigned long time_now, flagv = 0; + struct list_head * entry; + struct Scsi_Host * host; + + /* Extending the scope of fib_lock slightly to protect aac->in_reset */ + if (spin_trylock_irqsave(&aac->fib_lock, flagv) == 0) + return 0; + + if (aac->in_reset || !(BlinkLED = aac_adapter_check_health(aac))) { + spin_unlock_irqrestore(&aac->fib_lock, flagv); + return 0; /* OK */ + } + + aac->in_reset = 1; + + /* Fake up an AIF: + * aac_aifcmd.command = AifCmdEventNotify = 1 + * aac_aifcmd.seqnum = 0xFFFFFFFF + * aac_aifcmd.data[0] = AifEnExpEvent = 23 + * aac_aifcmd.data[1] = AifExeFirmwarePanic = 3 + * aac.aifcmd.data[2] = AifHighPriority = 3 + * aac.aifcmd.data[3] = BlinkLED + */ + + time_now = jiffies/HZ; + entry = aac->fib_list.next; + + /* + * For each Context that is on the + * fibctxList, make a copy of the + * fib, and then set the event to wake up the + * thread that is waiting for it. + */ + while (entry != &aac->fib_list) { + /* + * Extract the fibctx + */ + struct aac_fib_context *fibctx = list_entry(entry, struct aac_fib_context, next); + struct hw_fib * hw_fib; + struct fib * fib; + /* + * Check if the queue is getting + * backlogged + */ + if (fibctx->count > 20) { + /* + * It's *not* jiffies folks, + * but jiffies / HZ, so do not + * panic ... + */ + u32 time_last = fibctx->jiffies; + /* + * Has it been > 2 minutes + * since the last read off + * the queue? + */ + if ((time_now - time_last) > aif_timeout) { + entry = entry->next; + aac_close_fib_context(aac, fibctx); + continue; + } + } + /* + * Warning: no sleep allowed while + * holding spinlock + */ + hw_fib = kmalloc(sizeof(struct hw_fib), GFP_ATOMIC); + fib = kmalloc(sizeof(struct fib), GFP_ATOMIC); + if (fib && hw_fib) { + struct aac_aifcmd * aif; + + memset(hw_fib, 0, sizeof(struct hw_fib)); + memset(fib, 0, sizeof(struct fib)); + fib->hw_fib = hw_fib; + fib->dev = aac; + aac_fib_init(fib); + fib->type = FSAFS_NTC_FIB_CONTEXT; + fib->size = sizeof (struct fib); + fib->data = hw_fib->data; + aif = (struct aac_aifcmd *)hw_fib->data; + aif->command = cpu_to_le32(AifCmdEventNotify); + aif->seqnum = cpu_to_le32(0xFFFFFFFF); + aif->data[0] = cpu_to_le32(AifEnExpEvent); + aif->data[1] = cpu_to_le32(AifExeFirmwarePanic); + aif->data[2] = cpu_to_le32(AifHighPriority); + aif->data[3] = cpu_to_le32(BlinkLED); + + /* + * Put the FIB onto the + * fibctx's fibs + */ + list_add_tail(&fib->fiblink, &fibctx->fib_list); + fibctx->count++; + /* + * Set the event to wake up the + * thread that will waiting. + */ + up(&fibctx->wait_sem); + } else { + printk(KERN_WARNING "aifd: didn't allocate NewFib.\n"); + kfree(fib); + kfree(hw_fib); + } + entry = entry->next; + } + + spin_unlock_irqrestore(&aac->fib_lock, flagv); + + if (BlinkLED < 0) { + printk(KERN_ERR "%s: Host adapter dead %d\n", aac->name, BlinkLED); + goto out; + } + + printk(KERN_ERR "%s: Host adapter BLINK LED 0x%x\n", aac->name, BlinkLED); + + host = aac->scsi_host_ptr; + spin_lock_irqsave(host->host_lock, flagv); + BlinkLED = _aac_reset_adapter(aac); + spin_unlock_irqrestore(host->host_lock, flagv); + return BlinkLED; + +out: + aac->in_reset = 0; + return BlinkLED; +} + + /** * aac_command_thread - command processing thread * @dev: Adapter to monitor diff --git a/drivers/scsi/aacraid/dpcsup.c b/drivers/scsi/aacraid/dpcsup.c index b2a5c7262f3..8335f07b772 100644 --- a/drivers/scsi/aacraid/dpcsup.c +++ b/drivers/scsi/aacraid/dpcsup.c @@ -124,10 +124,15 @@ unsigned int aac_response_normal(struct aac_queue * q) } else { unsigned long flagv; spin_lock_irqsave(&fib->event_lock, flagv); - fib->done = 1; + if (!fib->done) + fib->done = 1; up(&fib->event_wait); spin_unlock_irqrestore(&fib->event_lock, flagv); FIB_COUNTER_INCREMENT(aac_config.NormalRecved); + if (fib->done == 2) { + aac_fib_complete(fib); + aac_fib_free(fib); + } } consumed++; spin_lock_irqsave(q->lock, flags); @@ -316,7 +321,8 @@ unsigned int aac_intr_normal(struct aac_dev * dev, u32 Index) unsigned long flagv; dprintk((KERN_INFO "event_wait up\n")); spin_lock_irqsave(&fib->event_lock, flagv); - fib->done = 1; + if (!fib->done) + fib->done = 1; up(&fib->event_wait); spin_unlock_irqrestore(&fib->event_lock, flagv); FIB_COUNTER_INCREMENT(aac_config.NormalRecved); diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index e42a479ce64..359e7ddfdb4 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -82,6 +82,8 @@ static LIST_HEAD(aac_devices); static int aac_cfg_major = -1; char aac_driver_version[] = AAC_DRIVER_FULL_VERSION; +extern int expose_physicals; + /* * Because of the way Linux names scsi devices, the order in this table has * become important. Check for on-board Raid first, add-in cards second. @@ -394,6 +396,7 @@ static int aac_slave_configure(struct scsi_device *sdev) sdev->skip_ms_page_3f = 1; } if ((sdev->type == TYPE_DISK) && + !expose_physicals && (sdev_channel(sdev) != CONTAINER_CHANNEL)) { struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata; if (!aac->raid_scsi_mode || (sdev_channel(sdev) != 2)) @@ -454,17 +457,17 @@ static int aac_eh_reset(struct scsi_cmnd* cmd) printk(KERN_ERR "%s: Host adapter reset request. SCSI hang ?\n", AAC_DRIVERNAME); aac = (struct aac_dev *)host->hostdata; - if (aac_adapter_check_health(aac)) { - printk(KERN_ERR "%s: Host adapter appears dead\n", - AAC_DRIVERNAME); - return -ENODEV; - } + + if ((count = aac_check_health(aac))) + return count; /* * Wait for all commands to complete to this specific * target (block maximum 60 seconds). */ for (count = 60; count; --count) { - int active = 0; + int active = aac->in_reset; + + if (active == 0) __shost_for_each_device(dev, host) { spin_lock_irqsave(&dev->list_lock, flags); list_for_each_entry(command, &dev->cmd_list, list) { @@ -864,13 +867,6 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, * Map in the registers from the adapter. */ aac->base_size = AAC_MIN_FOOTPRINT_SIZE; - if ((aac->regs.sa = ioremap( - (unsigned long)aac->scsi_host_ptr->base, AAC_MIN_FOOTPRINT_SIZE)) - == NULL) { - printk(KERN_WARNING "%s: unable to map adapter.\n", - AAC_DRIVERNAME); - goto out_free_fibs; - } if ((*aac_drivers[index].init)(aac)) goto out_unmap; @@ -928,12 +924,12 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, * all containers are on the virtual channel 0 (CONTAINER_CHANNEL) * physical channels are address by their actual physical number+1 */ - if (aac->nondasd_support == 1) + if ((aac->nondasd_support == 1) || expose_physicals) shost->max_channel = aac->maximum_num_channels; else shost->max_channel = 0; - aac_get_config_status(aac); + aac_get_config_status(aac, 0); aac_get_containers(aac); list_add(&aac->entry, insert); @@ -969,8 +965,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, aac_fib_map_free(aac); pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr, aac->comm_phys); kfree(aac->queues); - iounmap(aac->regs.sa); - out_free_fibs: + aac_adapter_ioremap(aac, 0); kfree(aac->fibs); kfree(aac->fsa_dev); out_free_host: @@ -1005,7 +1000,7 @@ static void __devexit aac_remove_one(struct pci_dev *pdev) kfree(aac->queues); free_irq(pdev->irq, aac); - iounmap(aac->regs.sa); + aac_adapter_ioremap(aac, 0); kfree(aac->fibs); kfree(aac->fsa_dev); @@ -1013,6 +1008,10 @@ static void __devexit aac_remove_one(struct pci_dev *pdev) list_del(&aac->entry); scsi_host_put(shost); pci_disable_device(pdev); + if (list_empty(&aac_devices)) { + unregister_chrdev(aac_cfg_major, "aac"); + aac_cfg_major = -1; + } } static struct pci_driver aac_pci_driver = { diff --git a/drivers/scsi/aacraid/rkt.c b/drivers/scsi/aacraid/rkt.c index 5b52966bbbf..643f23b5ded 100644 --- a/drivers/scsi/aacraid/rkt.c +++ b/drivers/scsi/aacraid/rkt.c @@ -28,370 +28,27 @@ * */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/sched.h> -#include <linux/pci.h> -#include <linux/spinlock.h> -#include <linux/slab.h> #include <linux/blkdev.h> -#include <linux/delay.h> -#include <linux/completion.h> -#include <linux/time.h> -#include <linux/interrupt.h> -#include <asm/semaphore.h> #include <scsi/scsi_host.h> #include "aacraid.h" -static irqreturn_t aac_rkt_intr(int irq, void *dev_id, struct pt_regs *regs) -{ - struct aac_dev *dev = dev_id; - - if (dev->new_comm_interface) { - u32 Index = rkt_readl(dev, MUnit.OutboundQueue); - if (Index == 0xFFFFFFFFL) - Index = rkt_readl(dev, MUnit.OutboundQueue); - if (Index != 0xFFFFFFFFL) { - do { - if (aac_intr_normal(dev, Index)) { - rkt_writel(dev, MUnit.OutboundQueue, Index); - rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormRespReady); - } - Index = rkt_readl(dev, MUnit.OutboundQueue); - } while (Index != 0xFFFFFFFFL); - return IRQ_HANDLED; - } - } else { - unsigned long bellbits; - u8 intstat; - intstat = rkt_readb(dev, MUnit.OISR); - /* - * Read mask and invert because drawbridge is reversed. - * This allows us to only service interrupts that have - * been enabled. - * Check to see if this is our interrupt. If it isn't just return - */ - if (intstat & ~(dev->OIMR)) - { - bellbits = rkt_readl(dev, OutboundDoorbellReg); - if (bellbits & DoorBellPrintfReady) { - aac_printf(dev, rkt_readl (dev, IndexRegs.Mailbox[5])); - rkt_writel(dev, MUnit.ODR,DoorBellPrintfReady); - rkt_writel(dev, InboundDoorbellReg,DoorBellPrintfDone); - } - else if (bellbits & DoorBellAdapterNormCmdReady) { - rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady); - aac_command_normal(&dev->queues->queue[HostNormCmdQueue]); -// rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady); - } - else if (bellbits & DoorBellAdapterNormRespReady) { - rkt_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady); - aac_response_normal(&dev->queues->queue[HostNormRespQueue]); - } - else if (bellbits & DoorBellAdapterNormCmdNotFull) { - rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull); - } - else if (bellbits & DoorBellAdapterNormRespNotFull) { - rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull); - rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull); - } - return IRQ_HANDLED; - } - } - return IRQ_NONE; -} - -/** - * aac_rkt_disable_interrupt - Disable interrupts - * @dev: Adapter - */ - -static void aac_rkt_disable_interrupt(struct aac_dev *dev) -{ - rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff); -} - /** - * rkt_sync_cmd - send a command and wait - * @dev: Adapter - * @command: Command to execute - * @p1: first parameter - * @ret: adapter status + * aac_rkt_ioremap + * @size: mapping resize request * - * This routine will send a synchronous command to the adapter and wait - * for its completion. */ - -static int rkt_sync_cmd(struct aac_dev *dev, u32 command, - u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, - u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4) +static int aac_rkt_ioremap(struct aac_dev * dev, u32 size) { - unsigned long start; - int ok; - /* - * Write the command into Mailbox 0 - */ - rkt_writel(dev, InboundMailbox0, command); - /* - * Write the parameters into Mailboxes 1 - 6 - */ - rkt_writel(dev, InboundMailbox1, p1); - rkt_writel(dev, InboundMailbox2, p2); - rkt_writel(dev, InboundMailbox3, p3); - rkt_writel(dev, InboundMailbox4, p4); - /* - * Clear the synch command doorbell to start on a clean slate. - */ - rkt_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0); - /* - * Disable doorbell interrupts - */ - rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff); - /* - * Force the completion of the mask register write before issuing - * the interrupt. - */ - rkt_readb (dev, MUnit.OIMR); - /* - * Signal that there is a new synch command - */ - rkt_writel(dev, InboundDoorbellReg, INBOUNDDOORBELL_0); - - ok = 0; - start = jiffies; - - /* - * Wait up to 30 seconds - */ - while (time_before(jiffies, start+30*HZ)) - { - udelay(5); /* Delay 5 microseconds to let Mon960 get info. */ - /* - * Mon960 will set doorbell0 bit when it has completed the command. - */ - if (rkt_readl(dev, OutboundDoorbellReg) & OUTBOUNDDOORBELL_0) { - /* - * Clear the doorbell. - */ - rkt_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0); - ok = 1; - break; - } - /* - * Yield the processor in case we are slow - */ - msleep(1); + if (!size) { + iounmap(dev->regs.rkt); + return 0; } - if (ok != 1) { - /* - * Restore interrupt mask even though we timed out - */ - if (dev->new_comm_interface) - rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7); - else - rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb); - return -ETIMEDOUT; - } - /* - * Pull the synch status from Mailbox 0. - */ - if (status) - *status = rkt_readl(dev, IndexRegs.Mailbox[0]); - if (r1) - *r1 = rkt_readl(dev, IndexRegs.Mailbox[1]); - if (r2) - *r2 = rkt_readl(dev, IndexRegs.Mailbox[2]); - if (r3) - *r3 = rkt_readl(dev, IndexRegs.Mailbox[3]); - if (r4) - *r4 = rkt_readl(dev, IndexRegs.Mailbox[4]); - /* - * Clear the synch command doorbell. - */ - rkt_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0); - /* - * Restore interrupt mask - */ - if (dev->new_comm_interface) - rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7); - else - rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb); - return 0; - -} - -/** - * aac_rkt_interrupt_adapter - interrupt adapter - * @dev: Adapter - * - * Send an interrupt to the i960 and breakpoint it. - */ - -static void aac_rkt_interrupt_adapter(struct aac_dev *dev) -{ - rkt_sync_cmd(dev, BREAKPOINT_REQUEST, 0, 0, 0, 0, 0, 0, - NULL, NULL, NULL, NULL, NULL); -} - -/** - * aac_rkt_notify_adapter - send an event to the adapter - * @dev: Adapter - * @event: Event to send - * - * Notify the i960 that something it probably cares about has - * happened. - */ - -static void aac_rkt_notify_adapter(struct aac_dev *dev, u32 event) -{ - switch (event) { - - case AdapNormCmdQue: - rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_1); - break; - case HostNormRespNotFull: - rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_4); - break; - case AdapNormRespQue: - rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_2); - break; - case HostNormCmdNotFull: - rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_3); - break; - case HostShutdown: -// rkt_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, 0, 0, -// NULL, NULL, NULL, NULL, NULL); - break; - case FastIo: - rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_6); - break; - case AdapPrintfDone: - rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_5); - break; - default: - BUG(); - break; - } -} - -/** - * aac_rkt_start_adapter - activate adapter - * @dev: Adapter - * - * Start up processing on an i960 based AAC adapter - */ - -static void aac_rkt_start_adapter(struct aac_dev *dev) -{ - struct aac_init *init; - - init = dev->init; - init->HostElapsedSeconds = cpu_to_le32(get_seconds()); - // We can only use a 32 bit address here - rkt_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, - 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL); -} - -/** - * aac_rkt_check_health - * @dev: device to check if healthy - * - * Will attempt to determine if the specified adapter is alive and - * capable of handling requests, returning 0 if alive. - */ -static int aac_rkt_check_health(struct aac_dev *dev) -{ - u32 status = rkt_readl(dev, MUnit.OMRx[0]); - - /* - * Check to see if the board failed any self tests. - */ - if (status & SELF_TEST_FAILED) + dev->base = dev->regs.rkt = ioremap(dev->scsi_host_ptr->base, size); + if (dev->base == NULL) return -1; - /* - * Check to see if the board panic'd. - */ - if (status & KERNEL_PANIC) { - char * buffer; - struct POSTSTATUS { - __le32 Post_Command; - __le32 Post_Address; - } * post; - dma_addr_t paddr, baddr; - int ret; - - if ((status & 0xFF000000L) == 0xBC000000L) - return (status >> 16) & 0xFF; - buffer = pci_alloc_consistent(dev->pdev, 512, &baddr); - ret = -2; - if (buffer == NULL) - return ret; - post = pci_alloc_consistent(dev->pdev, - sizeof(struct POSTSTATUS), &paddr); - if (post == NULL) { - pci_free_consistent(dev->pdev, 512, buffer, baddr); - return ret; - } - memset(buffer, 0, 512); - post->Post_Command = cpu_to_le32(COMMAND_POST_RESULTS); - post->Post_Address = cpu_to_le32(baddr); - rkt_writel(dev, MUnit.IMRx[0], paddr); - rkt_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, 0, 0, 0, 0, 0, - NULL, NULL, NULL, NULL, NULL); - pci_free_consistent(dev->pdev, sizeof(struct POSTSTATUS), - post, paddr); - if ((buffer[0] == '0') && ((buffer[1] == 'x') || (buffer[1] == 'X'))) { - ret = (buffer[2] <= '9') ? (buffer[2] - '0') : (buffer[2] - 'A' + 10); - ret <<= 4; - ret += (buffer[3] <= '9') ? (buffer[3] - '0') : (buffer[3] - 'A' + 10); - } - pci_free_consistent(dev->pdev, 512, buffer, baddr); - return ret; - } - /* - * Wait for the adapter to be up and running. - */ - if (!(status & KERNEL_UP_AND_RUNNING)) - return -3; - /* - * Everything is OK - */ - return 0; -} - -/** - * aac_rkt_send - * @fib: fib to issue - * - * Will send a fib, returning 0 if successful. - */ -static int aac_rkt_send(struct fib * fib) -{ - u64 addr = fib->hw_fib_pa; - struct aac_dev *dev = fib->dev; - volatile void __iomem *device = dev->regs.rkt; - u32 Index; - - dprintk((KERN_DEBUG "%p->aac_rkt_send(%p->%llx)\n", dev, fib, addr)); - Index = rkt_readl(dev, MUnit.InboundQueue); - if (Index == 0xFFFFFFFFL) - Index = rkt_readl(dev, MUnit.InboundQueue); - dprintk((KERN_DEBUG "Index = 0x%x\n", Index)); - if (Index == 0xFFFFFFFFL) - return Index; - device += Index; - dprintk((KERN_DEBUG "entry = %x %x %u\n", (u32)(addr & 0xffffffff), - (u32)(addr >> 32), (u32)le16_to_cpu(fib->hw_fib->header.Size))); - writel((u32)(addr & 0xffffffff), device); - device += sizeof(u32); - writel((u32)(addr >> 32), device); - device += sizeof(u32); - writel(le16_to_cpu(fib->hw_fib->header.Size), device); - rkt_writel(dev, MUnit.InboundQueue, Index); - dprintk((KERN_DEBUG "aac_rkt_send - return 0\n")); + dev->IndexRegs = &dev->regs.rkt->IndexRegs; return 0; } @@ -406,78 +63,18 @@ static int aac_rkt_send(struct fib * fib) int aac_rkt_init(struct aac_dev *dev) { - unsigned long start; - unsigned long status; - int instance; - const char * name; - - instance = dev->id; - name = dev->name; + int retval; + extern int _aac_rx_init(struct aac_dev *dev); + extern void aac_rx_start_adapter(struct aac_dev *dev); /* - * Check to see if the board panic'd while booting. - */ - /* - * Check to see if the board failed any self tests. - */ - if (rkt_readl(dev, MUnit.OMRx[0]) & SELF_TEST_FAILED) { - printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance); - goto error_iounmap; - } - /* - * Check to see if the monitor panic'd while booting. - */ - if (rkt_readl(dev, MUnit.OMRx[0]) & MONITOR_PANIC) { - printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance); - goto error_iounmap; - } - /* - * Check to see if the board panic'd while booting. - */ - if (rkt_readl(dev, MUnit.OMRx[0]) & KERNEL_PANIC) { - printk(KERN_ERR "%s%d: adapter kernel panic'd.\n", dev->name, instance); - goto error_iounmap; - } - start = jiffies; - /* - * Wait for the adapter to be up and running. Wait up to 3 minutes - */ - while (!(rkt_readl(dev, MUnit.OMRx[0]) & KERNEL_UP_AND_RUNNING)) - { - if(time_after(jiffies, start+startup_timeout*HZ)) - { - status = rkt_readl(dev, MUnit.OMRx[0]); - printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n", - dev->name, instance, status); - goto error_iounmap; - } - msleep(1); - } - if (request_irq(dev->scsi_host_ptr->irq, aac_rkt_intr, SA_SHIRQ|SA_INTERRUPT, "aacraid", (void *)dev)<0) - { - printk(KERN_ERR "%s%d: Interrupt unavailable.\n", name, instance); - goto error_iounmap; - } - /* * Fill in the function dispatch table. */ - dev->a_ops.adapter_interrupt = aac_rkt_interrupt_adapter; - dev->a_ops.adapter_disable_int = aac_rkt_disable_interrupt; - dev->a_ops.adapter_notify = aac_rkt_notify_adapter; - dev->a_ops.adapter_sync_cmd = rkt_sync_cmd; - dev->a_ops.adapter_check_health = aac_rkt_check_health; - dev->a_ops.adapter_send = aac_rkt_send; - - /* - * First clear out all interrupts. Then enable the one's that we - * can handle. - */ - rkt_writeb(dev, MUnit.OIMR, 0xff); - rkt_writel(dev, MUnit.ODR, 0xffffffff); - rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb); + dev->a_ops.adapter_ioremap = aac_rkt_ioremap; - if (aac_init_adapter(dev) == NULL) - goto error_irq; + retval = _aac_rx_init(dev); + if (retval) + return retval; if (dev->new_comm_interface) { /* * FIB Setup has already been done, but we can minimize the @@ -494,20 +91,11 @@ int aac_rkt_init(struct aac_dev *dev) dev->init->MaxIoCommands = cpu_to_le32(246); dev->scsi_host_ptr->can_queue = 246 - AAC_NUM_MGT_FIB; } - rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7); } /* * Tell the adapter that all is configured, and it can start * accepting requests */ - aac_rkt_start_adapter(dev); + aac_rx_start_adapter(dev); return 0; - -error_irq: - rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff); - free_irq(dev->scsi_host_ptr->irq, (void *)dev); - -error_iounmap: - - return -1; } diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c index 9dadfb28b3f..a1d214d770e 100644 --- a/drivers/scsi/aacraid/rx.c +++ b/drivers/scsi/aacraid/rx.c @@ -79,7 +79,7 @@ static irqreturn_t aac_rx_intr(int irq, void *dev_id, struct pt_regs *regs) { bellbits = rx_readl(dev, OutboundDoorbellReg); if (bellbits & DoorBellPrintfReady) { - aac_printf(dev, rx_readl (dev, IndexRegs.Mailbox[5])); + aac_printf(dev, readl (&dev->IndexRegs->Mailbox[5])); rx_writel(dev, MUnit.ODR,DoorBellPrintfReady); rx_writel(dev, InboundDoorbellReg,DoorBellPrintfDone); } @@ -134,14 +134,14 @@ static int rx_sync_cmd(struct aac_dev *dev, u32 command, /* * Write the command into Mailbox 0 */ - rx_writel(dev, InboundMailbox0, command); + writel(command, &dev->IndexRegs->Mailbox[0]); /* * Write the parameters into Mailboxes 1 - 6 */ - rx_writel(dev, InboundMailbox1, p1); - rx_writel(dev, InboundMailbox2, p2); - rx_writel(dev, InboundMailbox3, p3); - rx_writel(dev, InboundMailbox4, p4); + writel(p1, &dev->IndexRegs->Mailbox[1]); + writel(p2, &dev->IndexRegs->Mailbox[2]); + writel(p3, &dev->IndexRegs->Mailbox[3]); + writel(p4, &dev->IndexRegs->Mailbox[4]); /* * Clear the synch command doorbell to start on a clean slate. */ @@ -199,15 +199,15 @@ static int rx_sync_cmd(struct aac_dev *dev, u32 command, * Pull the synch status from Mailbox 0. */ if (status) - *status = rx_readl(dev, IndexRegs.Mailbox[0]); + *status = readl(&dev->IndexRegs->Mailbox[0]); if (r1) - *r1 = rx_readl(dev, IndexRegs.Mailbox[1]); + *r1 = readl(&dev->IndexRegs->Mailbox[1]); if (r2) - *r2 = rx_readl(dev, IndexRegs.Mailbox[2]); + *r2 = readl(&dev->IndexRegs->Mailbox[2]); if (r3) - *r3 = rx_readl(dev, IndexRegs.Mailbox[3]); + *r3 = readl(&dev->IndexRegs->Mailbox[3]); if (r4) - *r4 = rx_readl(dev, IndexRegs.Mailbox[4]); + *r4 = readl(&dev->IndexRegs->Mailbox[4]); /* * Clear the synch command doorbell. */ @@ -261,8 +261,6 @@ static void aac_rx_notify_adapter(struct aac_dev *dev, u32 event) rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_3); break; case HostShutdown: -// rx_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, 0, 0, -// NULL, NULL, NULL, NULL, NULL); break; case FastIo: rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_6); @@ -283,7 +281,7 @@ static void aac_rx_notify_adapter(struct aac_dev *dev, u32 event) * Start up processing on an i960 based AAC adapter */ -static void aac_rx_start_adapter(struct aac_dev *dev) +void aac_rx_start_adapter(struct aac_dev *dev) { struct aac_init *init; @@ -381,7 +379,7 @@ static int aac_rx_send(struct fib * fib) dprintk((KERN_DEBUG "Index = 0x%x\n", Index)); if (Index == 0xFFFFFFFFL) return Index; - device += Index; + device = dev->base + Index; dprintk((KERN_DEBUG "entry = %x %x %u\n", (u32)(addr & 0xffffffff), (u32)(addr >> 32), (u32)le16_to_cpu(fib->hw_fib->header.Size))); writel((u32)(addr & 0xffffffff), device); @@ -395,6 +393,43 @@ static int aac_rx_send(struct fib * fib) } /** + * aac_rx_ioremap + * @size: mapping resize request + * + */ +static int aac_rx_ioremap(struct aac_dev * dev, u32 size) +{ + if (!size) { + iounmap(dev->regs.rx); + return 0; + } + dev->base = dev->regs.rx = ioremap(dev->scsi_host_ptr->base, size); + if (dev->base == NULL) + return -1; + dev->IndexRegs = &dev->regs.rx->IndexRegs; + return 0; +} + +static int aac_rx_restart_adapter(struct aac_dev *dev) +{ + u32 var; + + printk(KERN_ERR "%s%d: adapter kernel panic'd.\n", + dev->name, dev->id); + + if (aac_rx_check_health(dev) <= 0) + return 1; + if (rx_sync_cmd(dev, IOP_RESET, 0, 0, 0, 0, 0, 0, + &var, NULL, NULL, NULL, NULL)) + return 1; + if (var != 0x00000001) + return 1; + if (rx_readl(dev, MUnit.OMRx[0]) & KERNEL_PANIC) + return 1; + return 0; +} + +/** * aac_rx_init - initialize an i960 based AAC card * @dev: device to configure * @@ -403,7 +438,7 @@ static int aac_rx_send(struct fib * fib) * to the comm region. */ -int aac_rx_init(struct aac_dev *dev) +int _aac_rx_init(struct aac_dev *dev) { unsigned long start; unsigned long status; @@ -413,27 +448,30 @@ int aac_rx_init(struct aac_dev *dev) instance = dev->id; name = dev->name; + if (aac_adapter_ioremap(dev, dev->base_size)) { + printk(KERN_WARNING "%s: unable to map adapter.\n", name); + goto error_iounmap; + } + /* * Check to see if the board panic'd while booting. */ + status = rx_readl(dev, MUnit.OMRx[0]); + if (status & KERNEL_PANIC) + if (aac_rx_restart_adapter(dev)) + goto error_iounmap; /* * Check to see if the board failed any self tests. */ - if (rx_readl(dev, MUnit.OMRx[0]) & SELF_TEST_FAILED) { + status = rx_readl(dev, MUnit.OMRx[0]); + if (status & SELF_TEST_FAILED) { printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance); goto error_iounmap; } /* - * Check to see if the board panic'd while booting. - */ - if (rx_readl(dev, MUnit.OMRx[0]) & KERNEL_PANIC) { - printk(KERN_ERR "%s%d: adapter kernel panic.\n", dev->name, instance); - goto error_iounmap; - } - /* * Check to see if the monitor panic'd while booting. */ - if (rx_readl(dev, MUnit.OMRx[0]) & MONITOR_PANIC) { + if (status & MONITOR_PANIC) { printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance); goto error_iounmap; } @@ -441,19 +479,17 @@ int aac_rx_init(struct aac_dev *dev) /* * Wait for the adapter to be up and running. Wait up to 3 minutes */ - while ((!(rx_readl(dev, IndexRegs.Mailbox[7]) & KERNEL_UP_AND_RUNNING)) - || (!(rx_readl(dev, MUnit.OMRx[0]) & KERNEL_UP_AND_RUNNING))) + while (!((status = rx_readl(dev, MUnit.OMRx[0])) & KERNEL_UP_AND_RUNNING)) { if(time_after(jiffies, start+startup_timeout*HZ)) { - status = rx_readl(dev, IndexRegs.Mailbox[7]); printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n", dev->name, instance, status); goto error_iounmap; } msleep(1); } - if (request_irq(dev->scsi_host_ptr->irq, aac_rx_intr, SA_SHIRQ|SA_INTERRUPT, "aacraid", (void *)dev)<0) + if (request_irq(dev->scsi_host_ptr->irq, aac_rx_intr, IRQF_SHARED|IRQF_DISABLED, "aacraid", (void *)dev)<0) { printk(KERN_ERR "%s%d: Interrupt unavailable.\n", name, instance); goto error_iounmap; @@ -481,11 +517,6 @@ int aac_rx_init(struct aac_dev *dev) if (dev->new_comm_interface) rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7); - /* - * Tell the adapter that all is configured, and it can start - * accepting requests - */ - aac_rx_start_adapter(dev); return 0; error_irq: @@ -496,3 +527,23 @@ error_iounmap: return -1; } + +int aac_rx_init(struct aac_dev *dev) +{ + int retval; + + /* + * Fill in the function dispatch table. + */ + dev->a_ops.adapter_ioremap = aac_rx_ioremap; + + retval = _aac_rx_init(dev); + if (!retval) { + /* + * Tell the adapter that all is configured, and it can + * start accepting requests + */ + aac_rx_start_adapter(dev); + } + return retval; +} diff --git a/drivers/scsi/aacraid/sa.c b/drivers/scsi/aacraid/sa.c index 88d400fccc9..f906ead239d 100644 --- a/drivers/scsi/aacraid/sa.c +++ b/drivers/scsi/aacraid/sa.c @@ -281,6 +281,21 @@ static int aac_sa_check_health(struct aac_dev *dev) } /** + * aac_sa_ioremap + * @size: mapping resize request + * + */ +static int aac_sa_ioremap(struct aac_dev * dev, u32 size) +{ + if (!size) { + iounmap(dev->regs.sa); + return 0; + } + dev->base = dev->regs.sa = ioremap(dev->scsi_host_ptr->base, size); + return (dev->base == NULL) ? -1 : 0; +} + +/** * aac_sa_init - initialize an ARM based AAC card * @dev: device to configure * @@ -299,6 +314,11 @@ int aac_sa_init(struct aac_dev *dev) instance = dev->id; name = dev->name; + if (aac_sa_ioremap(dev, dev->base_size)) { + printk(KERN_WARNING "%s: unable to map adapter.\n", name); + goto error_iounmap; + } + /* * Check to see if the board failed any self tests. */ @@ -327,7 +347,7 @@ int aac_sa_init(struct aac_dev *dev) msleep(1); } - if (request_irq(dev->scsi_host_ptr->irq, aac_sa_intr, SA_SHIRQ|SA_INTERRUPT, "aacraid", (void *)dev ) < 0) { + if (request_irq(dev->scsi_host_ptr->irq, aac_sa_intr, IRQF_SHARED|IRQF_DISABLED, "aacraid", (void *)dev ) < 0) { printk(KERN_WARNING "%s%d: Interrupt unavailable.\n", name, instance); goto error_iounmap; } @@ -341,6 +361,7 @@ int aac_sa_init(struct aac_dev *dev) dev->a_ops.adapter_notify = aac_sa_notify_adapter; dev->a_ops.adapter_sync_cmd = sa_sync_cmd; dev->a_ops.adapter_check_health = aac_sa_check_health; + dev->a_ops.adapter_ioremap = aac_sa_ioremap; /* * First clear out all interrupts. Then enable the one's that diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index 2a419634b25..773f02e3b10 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -371,7 +371,7 @@ 1.5 (8/8/96): 1. Add support for ABP-940U (PCI Ultra) adapter. - 2. Add support for IRQ sharing by setting the SA_SHIRQ flag for + 2. Add support for IRQ sharing by setting the IRQF_SHARED flag for request_irq and supplying a dev_id pointer to both request_irq() and free_irq(). 3. In AscSearchIOPortAddr11() restore a call to check_region() which @@ -504,9 +504,9 @@ 3. For v2.1.93 and newer kernels use CONFIG_PCI and new PCI BIOS access functions. 4. Update board serial number printing. - 5. Try allocating an IRQ both with and without the SA_INTERRUPT + 5. Try allocating an IRQ both with and without the IRQF_DISABLED flag set to allow IRQ sharing with drivers that do not set - the SA_INTERRUPT flag. Also display a more descriptive error + the IRQF_DISABLED flag. Also display a more descriptive error message if request_irq() fails. 6. Update to latest Asc and Adv Libraries. @@ -754,7 +754,6 @@ * --- Linux Include Files */ -#include <linux/config.h> #include <linux/module.h> #if defined(CONFIG_X86) && !defined(CONFIG_ISA) @@ -889,10 +888,6 @@ typedef unsigned char uchar; #define ASC_PCI_ID2DEV(id) (((id) >> 11) & 0x1F) #define ASC_PCI_ID2FUNC(id) (((id) >> 8) & 0x7) #define ASC_PCI_MKID(bus, dev, func) ((((dev) & 0x1F) << 11) | (((func) & 0x7) << 8) | ((bus) & 0xFF)) -#define ASC_PCI_VENDORID 0x10CD -#define ASC_PCI_DEVICEID_1200A 0x1100 -#define ASC_PCI_DEVICEID_1200B 0x1200 -#define ASC_PCI_DEVICEID_ULTRA 0x1300 #define ASC_PCI_REVISION_3150 0x02 #define ASC_PCI_REVISION_3050 0x03 @@ -900,6 +895,14 @@ typedef unsigned char uchar; #define ASC_DVCLIB_CALL_FAILED (0) #define ASC_DVCLIB_CALL_ERROR (-1) +#define PCI_VENDOR_ID_ASP 0x10cd +#define PCI_DEVICE_ID_ASP_1200A 0x1100 +#define PCI_DEVICE_ID_ASP_ABP940 0x1200 +#define PCI_DEVICE_ID_ASP_ABP940U 0x1300 +#define PCI_DEVICE_ID_ASP_ABP940UW 0x2300 +#define PCI_DEVICE_ID_38C0800_REV1 0x2500 +#define PCI_DEVICE_ID_38C1600_REV1 0x2700 + /* * Enable CC_VERY_LONG_SG_LIST to support up to 64K element SG lists. * The SRB structure will have to be changed and the ASC_SRB2SCSIQ() @@ -1493,8 +1496,6 @@ typedef struct asc_dvc_cfg { #define ASC_INIT_STATE_END_INQUIRY 0x0080 #define ASC_INIT_RESET_SCSI_DONE 0x0100 #define ASC_INIT_STATE_WITHOUT_EEP 0x8000 -#define ASC_PCI_DEVICE_ID_REV_A 0x1100 -#define ASC_PCI_DEVICE_ID_REV_B 0x1200 #define ASC_BUG_FIX_IF_NOT_DWB 0x0001 #define ASC_BUG_FIX_ASYN_USE_SYN 0x0002 #define ASYN_SDTR_DATA_FIX_PCI_REV_AB 0x41 @@ -2101,12 +2102,6 @@ STATIC ASC_DCNT AscGetMaxDmaCount(ushort); #define ADV_NUM_PAGE_CROSSING \ ((ADV_SG_TOTAL_MEM_SIZE + (ADV_PAGE_SIZE - 1))/ADV_PAGE_SIZE) -/* a_condor.h */ -#define ADV_PCI_VENDOR_ID 0x10CD -#define ADV_PCI_DEVICE_ID_REV_A 0x2300 -#define ADV_PCI_DEVID_38C0800_REV1 0x2500 -#define ADV_PCI_DEVID_38C1600_REV1 0x2700 - #define ADV_EEP_DVC_CFG_BEGIN (0x00) #define ADV_EEP_DVC_CFG_END (0x15) #define ADV_EEP_DVC_CTL_BEGIN (0x16) /* location of OEM name */ @@ -3570,14 +3565,7 @@ typedef struct scsi_cmnd REQ, *REQP; #define PCI_MAX_SLOT 0x1F #define PCI_MAX_BUS 0xFF #define PCI_IOADDRESS_MASK 0xFFFE -#define ASC_PCI_VENDORID 0x10CD #define ASC_PCI_DEVICE_ID_CNT 6 /* PCI Device ID count. */ -#define ASC_PCI_DEVICE_ID_1100 0x1100 -#define ASC_PCI_DEVICE_ID_1200 0x1200 -#define ASC_PCI_DEVICE_ID_1300 0x1300 -#define ASC_PCI_DEVICE_ID_2300 0x2300 /* ASC-3550 */ -#define ASC_PCI_DEVICE_ID_2500 0x2500 /* ASC-38C0800 */ -#define ASC_PCI_DEVICE_ID_2700 0x2700 /* ASC-38C1600 */ #ifndef ADVANSYS_STATS #define ASC_STATS(shp, counter) @@ -4331,12 +4319,12 @@ advansys_detect(struct scsi_host_template *tpnt) struct pci_dev *pci_devp = NULL; int pci_device_id_cnt = 0; unsigned int pci_device_id[ASC_PCI_DEVICE_ID_CNT] = { - ASC_PCI_DEVICE_ID_1100, - ASC_PCI_DEVICE_ID_1200, - ASC_PCI_DEVICE_ID_1300, - ASC_PCI_DEVICE_ID_2300, - ASC_PCI_DEVICE_ID_2500, - ASC_PCI_DEVICE_ID_2700 + PCI_DEVICE_ID_ASP_1200A, + PCI_DEVICE_ID_ASP_ABP940, + PCI_DEVICE_ID_ASP_ABP940U, + PCI_DEVICE_ID_ASP_ABP940UW, + PCI_DEVICE_ID_38C0800_REV1, + PCI_DEVICE_ID_38C1600_REV1 }; ADV_PADDR pci_memory_address; #endif /* CONFIG_PCI */ @@ -4472,7 +4460,7 @@ advansys_detect(struct scsi_host_template *tpnt) /* Find all PCI cards. */ while (pci_device_id_cnt < ASC_PCI_DEVICE_ID_CNT) { - if ((pci_devp = pci_find_device(ASC_PCI_VENDORID, + if ((pci_devp = pci_find_device(PCI_VENDOR_ID_ASP, pci_device_id[pci_device_id_cnt], pci_devp)) == NULL) { pci_device_id_cnt++; @@ -4576,9 +4564,9 @@ advansys_detect(struct scsi_host_template *tpnt) */ #ifdef CONFIG_PCI if (asc_bus[bus] == ASC_IS_PCI && - (pci_devp->device == ASC_PCI_DEVICE_ID_2300 || - pci_devp->device == ASC_PCI_DEVICE_ID_2500 || - pci_devp->device == ASC_PCI_DEVICE_ID_2700)) + (pci_devp->device == PCI_DEVICE_ID_ASP_ABP940UW || + pci_devp->device == PCI_DEVICE_ID_38C0800_REV1 || + pci_devp->device == PCI_DEVICE_ID_38C1600_REV1)) { boardp->flags |= ASC_IS_WIDE_BOARD; } @@ -4601,11 +4589,11 @@ advansys_detect(struct scsi_host_template *tpnt) adv_dvc_varp->isr_callback = adv_isr_callback; adv_dvc_varp->async_callback = adv_async_callback; #ifdef CONFIG_PCI - if (pci_devp->device == ASC_PCI_DEVICE_ID_2300) + if (pci_devp->device == PCI_DEVICE_ID_ASP_ABP940UW) { ASC_DBG(1, "advansys_detect: ASC-3550\n"); adv_dvc_varp->chip_type = ADV_CHIP_ASC3550; - } else if (pci_devp->device == ASC_PCI_DEVICE_ID_2500) + } else if (pci_devp->device == PCI_DEVICE_ID_38C0800_REV1) { ASC_DBG(1, "advansys_detect: ASC-38C0800\n"); adv_dvc_varp->chip_type = ADV_CHIP_ASC38C0800; @@ -5203,19 +5191,19 @@ advansys_detect(struct scsi_host_template *tpnt) /* Register IRQ Number. */ ASC_DBG1(2, "advansys_detect: request_irq() %d\n", shp->irq); /* - * If request_irq() fails with the SA_INTERRUPT flag set, - * then try again without the SA_INTERRUPT flag set. This + * If request_irq() fails with the IRQF_DISABLED flag set, + * then try again without the IRQF_DISABLED flag set. This * allows IRQ sharing to work even with other drivers that - * do not set the SA_INTERRUPT flag. + * do not set the IRQF_DISABLED flag. * - * If SA_INTERRUPT is not set, then interrupts are enabled + * If IRQF_DISABLED is not set, then interrupts are enabled * before the driver interrupt function is called. */ if (((ret = request_irq(shp->irq, advansys_interrupt, - SA_INTERRUPT | (share_irq == TRUE ? SA_SHIRQ : 0), + IRQF_DISABLED | (share_irq == TRUE ? IRQF_SHARED : 0), "advansys", boardp)) != 0) && ((ret = request_irq(shp->irq, advansys_interrupt, - (share_irq == TRUE ? SA_SHIRQ : 0), + (share_irq == TRUE ? IRQF_SHARED : 0), "advansys", boardp)) != 0)) { if (ret == -EBUSY) { @@ -11923,7 +11911,7 @@ AscInitGetConfig( PCIRevisionID = DvcReadPCIConfigByte(asc_dvc, AscPCIConfigRevisionIDRegister); - if (PCIVendorID != ASC_PCI_VENDORID) { + if (PCIVendorID != PCI_VENDOR_ID_ASP) { warn_code |= ASC_WARN_SET_PCI_CONFIG_SPACE; } prevCmdRegBits = DvcReadPCIConfigByte(asc_dvc, @@ -11943,15 +11931,15 @@ AscInitGetConfig( warn_code |= ASC_WARN_SET_PCI_CONFIG_SPACE; } } - if ((PCIDeviceID == ASC_PCI_DEVICEID_1200A) || - (PCIDeviceID == ASC_PCI_DEVICEID_1200B)) { + if ((PCIDeviceID == PCI_DEVICE_ID_ASP_1200A) || + (PCIDeviceID == PCI_DEVICE_ID_ASP_ABP940)) { DvcWritePCIConfigByte(asc_dvc, AscPCIConfigLatencyTimer, 0x00); if (DvcReadPCIConfigByte(asc_dvc, AscPCIConfigLatencyTimer) != 0x00) { warn_code |= ASC_WARN_SET_PCI_CONFIG_SPACE; } - } else if (PCIDeviceID == ASC_PCI_DEVICEID_ULTRA) { + } else if (PCIDeviceID == PCI_DEVICE_ID_ASP_ABP940U) { if (DvcReadPCIConfigByte(asc_dvc, AscPCIConfigLatencyTimer) < 0x20) { DvcWritePCIConfigByte(asc_dvc, @@ -12038,8 +12026,8 @@ AscInitFromAscDvcVar( AscSetChipCfgMsw(iop_base, cfg_msw); if ((asc_dvc->bus_type & ASC_IS_PCI_ULTRA) == ASC_IS_PCI_ULTRA) { } else { - if ((pci_device_id == ASC_PCI_DEVICE_ID_REV_A) || - (pci_device_id == ASC_PCI_DEVICE_ID_REV_B)) { + if ((pci_device_id == PCI_DEVICE_ID_ASP_1200A) || + (pci_device_id == PCI_DEVICE_ID_ASP_ABP940)) { asc_dvc->bug_fix_cntl |= ASC_BUG_FIX_IF_NOT_DWB; asc_dvc->bug_fix_cntl |= ASC_BUG_FIX_ASYN_USE_SYN; } @@ -12374,7 +12362,7 @@ AscInitFromEEP(ASC_DVC_VAR *asc_dvc) ASC_PRINT1( "AscInitFromEEP: Failed to re-write EEPROM with %d errors.\n", i); } else { - ASC_PRINT("AscInitFromEEP: Succesfully re-wrote EEPROM."); + ASC_PRINT("AscInitFromEEP: Successfully re-wrote EEPROM.\n"); } } return (warn_code); @@ -14276,8 +14264,8 @@ Default_38C0800_EEPROM_Config __initdata = { 0, /* 55 reserved */ 0, /* 56 cisptr_lsw */ 0, /* 57 cisprt_msw */ - ADV_PCI_VENDOR_ID, /* 58 subsysvid */ - ADV_PCI_DEVID_38C0800_REV1, /* 59 subsysid */ + PCI_VENDOR_ID_ASP, /* 58 subsysvid */ + PCI_DEVICE_ID_38C0800_REV1, /* 59 subsysid */ 0, /* 60 reserved */ 0, /* 61 reserved */ 0, /* 62 reserved */ @@ -14406,8 +14394,8 @@ Default_38C1600_EEPROM_Config __initdata = { 0, /* 55 reserved */ 0, /* 56 cisptr_lsw */ 0, /* 57 cisprt_msw */ - ADV_PCI_VENDOR_ID, /* 58 subsysvid */ - ADV_PCI_DEVID_38C1600_REV1, /* 59 subsysid */ + PCI_VENDOR_ID_ASP, /* 58 subsysvid */ + PCI_DEVICE_ID_38C1600_REV1, /* 59 subsysid */ 0, /* 60 reserved */ 0, /* 61 reserved */ 0, /* 62 reserved */ @@ -17316,7 +17304,7 @@ AdvWaitEEPCmd(AdvPortAddr iop_base) /* * Write the EEPROM from 'cfg_buf'. */ -void +void __init AdvSet3550EEPConfig(AdvPortAddr iop_base, ADVEEP_3550_CONFIG *cfg_buf) { ushort *wbuf; @@ -17383,7 +17371,7 @@ AdvSet3550EEPConfig(AdvPortAddr iop_base, ADVEEP_3550_CONFIG *cfg_buf) /* * Write the EEPROM from 'cfg_buf'. */ -void +void __init AdvSet38C0800EEPConfig(AdvPortAddr iop_base, ADVEEP_38C0800_CONFIG *cfg_buf) { @@ -17451,7 +17439,7 @@ AdvSet38C0800EEPConfig(AdvPortAddr iop_base, /* * Write the EEPROM from 'cfg_buf'. */ -void +void __init AdvSet38C1600EEPConfig(AdvPortAddr iop_base, ADVEEP_38C1600_CONFIG *cfg_buf) { @@ -18226,3 +18214,22 @@ AdvInquiryHandling( } } MODULE_LICENSE("Dual BSD/GPL"); + +/* PCI Devices supported by this driver */ +static struct pci_device_id advansys_pci_tbl[] __devinitdata = { + { PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_1200A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_ABP940, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_ABP940U, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_ABP940UW, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_38C0800_REV1, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_38C1600_REV1, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { } +}; +MODULE_DEVICE_TABLE(pci, advansys_pci_tbl); + diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c index de80cdfb5b9..fb6a476eb87 100644 --- a/drivers/scsi/aha152x.c +++ b/drivers/scsi/aha152x.c @@ -253,6 +253,7 @@ #include <linux/isapnp.h> #include <linux/spinlock.h> #include <linux/workqueue.h> +#include <linux/list.h> #include <asm/semaphore.h> #include <scsi/scsicam.h> @@ -262,6 +263,8 @@ #include <scsi/scsi_transport_spi.h> #include "aha152x.h" +static LIST_HEAD(aha152x_host_list); + /* DEFINES */ @@ -423,8 +426,6 @@ MODULE_DEVICE_TABLE(isapnp, id_table); #endif /* !PCMCIA */ -static int registered_count=0; -static struct Scsi_Host *aha152x_host[2]; static struct scsi_host_template aha152x_driver_template; /* @@ -541,6 +542,7 @@ struct aha152x_hostdata { #ifdef __ISAPNP__ struct pnp_dev *pnpdev; #endif + struct list_head host_list; }; @@ -551,6 +553,11 @@ struct aha152x_hostdata { struct aha152x_scdata { Scsi_Cmnd *next; /* next sc in queue */ struct semaphore *sem; /* semaphore to block on */ + unsigned char cmd_len; + unsigned char cmnd[MAX_COMMAND_SIZE]; + unsigned short use_sg; + unsigned request_bufflen; + void *request_buffer; }; @@ -750,20 +757,9 @@ static inline Scsi_Cmnd *remove_SC(Scsi_Cmnd **SC, Scsi_Cmnd *SCp) return ptr; } -static inline struct Scsi_Host *lookup_irq(int irqno) -{ - int i; - - for(i=0; i<ARRAY_SIZE(aha152x_host); i++) - if(aha152x_host[i] && aha152x_host[i]->irq==irqno) - return aha152x_host[i]; - - return NULL; -} - static irqreturn_t swintr(int irqno, void *dev_id, struct pt_regs *regs) { - struct Scsi_Host *shpnt = lookup_irq(irqno); + struct Scsi_Host *shpnt = (struct Scsi_Host *)dev_id; if (!shpnt) { printk(KERN_ERR "aha152x: catched software interrupt %d for unknown controller.\n", irqno); @@ -786,10 +782,11 @@ struct Scsi_Host *aha152x_probe_one(struct aha152x_setup *setup) return NULL; } - /* need to have host registered before triggering any interrupt */ - aha152x_host[registered_count] = shpnt; - memset(HOSTDATA(shpnt), 0, sizeof *HOSTDATA(shpnt)); + INIT_LIST_HEAD(&HOSTDATA(shpnt)->host_list); + + /* need to have host registered before triggering any interrupt */ + list_add_tail(&HOSTDATA(shpnt)->host_list, &aha152x_host_list); shpnt->io_port = setup->io_port; shpnt->n_io_port = IO_RANGE; @@ -855,7 +852,7 @@ struct Scsi_Host *aha152x_probe_one(struct aha152x_setup *setup) SETPORT(SIMODE0, 0); SETPORT(SIMODE1, 0); - if( request_irq(shpnt->irq, swintr, SA_INTERRUPT|SA_SHIRQ, "aha152x", shpnt) ) { + if( request_irq(shpnt->irq, swintr, IRQF_DISABLED|IRQF_SHARED, "aha152x", shpnt) ) { printk(KERN_ERR "aha152x%d: irq %d busy.\n", shpnt->host_no, shpnt->irq); goto out_host_put; } @@ -889,7 +886,7 @@ struct Scsi_Host *aha152x_probe_one(struct aha152x_setup *setup) SETPORT(SSTAT0, 0x7f); SETPORT(SSTAT1, 0xef); - if ( request_irq(shpnt->irq, intr, SA_INTERRUPT|SA_SHIRQ, "aha152x", shpnt) ) { + if ( request_irq(shpnt->irq, intr, IRQF_DISABLED|IRQF_SHARED, "aha152x", shpnt) ) { printk(KERN_ERR "aha152x%d: failed to reassign irq %d.\n", shpnt->host_no, shpnt->irq); goto out_host_put; } @@ -902,12 +899,10 @@ struct Scsi_Host *aha152x_probe_one(struct aha152x_setup *setup) scsi_scan_host(shpnt); - registered_count++; - return shpnt; out_host_put: - aha152x_host[registered_count]=NULL; + list_del(&HOSTDATA(shpnt)->host_list); scsi_host_put(shpnt); return NULL; @@ -932,6 +927,7 @@ void aha152x_release(struct Scsi_Host *shpnt) #endif scsi_remove_host(shpnt); + list_del(&HOSTDATA(shpnt)->host_list); scsi_host_put(shpnt); } @@ -1006,11 +1002,20 @@ static int aha152x_internal_queue(Scsi_Cmnd *SCpnt, struct semaphore *sem, int p return FAILED; } } else { + struct aha152x_scdata *sc; + SCpnt->host_scribble = kmalloc(sizeof(struct aha152x_scdata), GFP_ATOMIC); if(SCpnt->host_scribble==0) { printk(ERR_LEAD "allocation failed\n", CMDINFO(SCpnt)); return FAILED; } + + sc = SCDATA(SCpnt); + memcpy(sc->cmnd, SCpnt->cmnd, sizeof(sc->cmnd)); + sc->request_buffer = SCpnt->request_buffer; + sc->request_bufflen = SCpnt->request_bufflen; + sc->use_sg = SCpnt->use_sg; + sc->cmd_len = SCpnt->cmd_len; } SCNEXT(SCpnt) = NULL; @@ -1165,6 +1170,10 @@ static int aha152x_device_reset(Scsi_Cmnd * SCpnt) DECLARE_MUTEX_LOCKED(sem); struct timer_list timer; int ret, issued, disconnected; + unsigned char old_cmd_len = SCpnt->cmd_len; + unsigned short old_use_sg = SCpnt->use_sg; + void *old_buffer = SCpnt->request_buffer; + unsigned old_bufflen = SCpnt->request_bufflen; unsigned long flags; #if defined(AHA152X_DEBUG) @@ -1198,11 +1207,11 @@ static int aha152x_device_reset(Scsi_Cmnd * SCpnt) add_timer(&timer); down(&sem); del_timer(&timer); - - SCpnt->cmd_len = SCpnt->old_cmd_len; - SCpnt->use_sg = SCpnt->old_use_sg; - SCpnt->request_buffer = SCpnt->buffer; - SCpnt->request_bufflen = SCpnt->bufflen; + + SCpnt->cmd_len = old_cmd_len; + SCpnt->use_sg = old_use_sg; + SCpnt->request_buffer = old_buffer; + SCpnt->request_bufflen = old_bufflen; DO_LOCK(flags); @@ -1441,9 +1450,12 @@ static struct work_struct aha152x_tq; */ static void run(void) { - int i; - for (i = 0; i<ARRAY_SIZE(aha152x_host); i++) { - is_complete(aha152x_host[i]); + struct aha152x_hostdata *hd; + + list_for_each_entry(hd, &aha152x_host_list, host_list) { + struct Scsi_Host *shost = container_of((void *)hd, struct Scsi_Host, hostdata); + + is_complete(shost); } } @@ -1453,7 +1465,7 @@ static void run(void) */ static irqreturn_t intr(int irqno, void *dev_id, struct pt_regs *regs) { - struct Scsi_Host *shpnt = lookup_irq(irqno); + struct Scsi_Host *shpnt = (struct Scsi_Host *)dev_id; unsigned long flags; unsigned char rev, dmacntrl0; @@ -1565,6 +1577,9 @@ static void busfree_run(struct Scsi_Host *shpnt) #endif if(DONE_SC->SCp.phase & check_condition) { + struct scsi_cmnd *cmd = HOSTDATA(shpnt)->done_SC; + struct aha152x_scdata *sc = SCDATA(cmd); + #if 0 if(HOSTDATA(shpnt)->debug & debug_eh) { printk(ERR_LEAD "received sense: ", CMDINFO(DONE_SC)); @@ -1573,13 +1588,13 @@ static void busfree_run(struct Scsi_Host *shpnt) #endif /* restore old command */ - memcpy((void *) DONE_SC->cmnd, (void *) DONE_SC->data_cmnd, sizeof(DONE_SC->data_cmnd)); - DONE_SC->request_buffer = DONE_SC->buffer; - DONE_SC->request_bufflen = DONE_SC->bufflen; - DONE_SC->use_sg = DONE_SC->old_use_sg; - DONE_SC->cmd_len = DONE_SC->old_cmd_len; + memcpy(cmd->cmnd, sc->cmnd, sizeof(sc->cmnd)); + cmd->request_buffer = sc->request_buffer; + cmd->request_bufflen = sc->request_bufflen; + cmd->use_sg = sc->use_sg; + cmd->cmd_len = sc->cmd_len; - DONE_SC->SCp.Status = 0x02; + cmd->SCp.Status = 0x02; HOSTDATA(shpnt)->commands--; if (!HOSTDATA(shpnt)->commands) @@ -3932,16 +3947,17 @@ static int __init aha152x_init(void) #endif } - return registered_count>0; + return 1; } static void __exit aha152x_exit(void) { - int i; + struct aha152x_hostdata *hd; + + list_for_each_entry(hd, &aha152x_host_list, host_list) { + struct Scsi_Host *shost = container_of((void *)hd, struct Scsi_Host, hostdata); - for(i=0; i<ARRAY_SIZE(setup); i++) { - aha152x_release(aha152x_host[i]); - aha152x_host[i]=NULL; + aha152x_release(shost); } } diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c index 86c6bd23459..24f0f546179 100644 --- a/drivers/scsi/aha1542.c +++ b/drivers/scsi/aha1542.c @@ -25,7 +25,6 @@ * Added proper detection of the AHA-1640 (MCA version of AHA-1540) */ -#include <linux/config.h> #include <linux/module.h> #include <linux/interrupt.h> #include <linux/kernel.h> diff --git a/drivers/scsi/aha1740.c b/drivers/scsi/aha1740.c index 4b8c6a54392..6b35ed8301e 100644 --- a/drivers/scsi/aha1740.c +++ b/drivers/scsi/aha1740.c @@ -634,7 +634,7 @@ static int aha1740_probe (struct device *dev) } DEB(printk("aha1740_probe: enable interrupt channel %d\n",irq_level)); - if (request_irq(irq_level,aha1740_intr_handle,irq_type ? 0 : SA_SHIRQ, + if (request_irq(irq_level,aha1740_intr_handle,irq_type ? 0 : IRQF_SHARED, "aha1740",shpnt)) { printk(KERN_ERR "aha1740_probe: Unable to allocate IRQ %d.\n", irq_level); @@ -681,6 +681,7 @@ static struct eisa_device_id aha1740_ids[] = { { "ADP0400" }, /* 1744 */ { "" } }; +MODULE_DEVICE_TABLE(eisa, aha1740_ids); static struct eisa_driver aha1740_driver = { .id_table = aha1740_ids, diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c deleted file mode 100644 index 4bb77f62b3b..00000000000 --- a/drivers/scsi/ahci.c +++ /dev/null @@ -1,1472 +0,0 @@ -/* - * ahci.c - AHCI SATA support - * - * Maintained by: Jeff Garzik <jgarzik@pobox.com> - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2004-2005 Red Hat, Inc. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * AHCI hardware documentation: - * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf - * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/blkdev.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/sched.h> -#include <linux/dma-mapping.h> -#include <linux/device.h> -#include <scsi/scsi_host.h> -#include <scsi/scsi_cmnd.h> -#include <linux/libata.h> -#include <asm/io.h> - -#define DRV_NAME "ahci" -#define DRV_VERSION "1.3" - - -enum { - AHCI_PCI_BAR = 5, - AHCI_MAX_SG = 168, /* hardware max is 64K */ - AHCI_DMA_BOUNDARY = 0xffffffff, - AHCI_USE_CLUSTERING = 0, - AHCI_MAX_CMDS = 32, - AHCI_CMD_SZ = 32, - AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ, - AHCI_RX_FIS_SZ = 256, - AHCI_CMD_TBL_CDB = 0x40, - AHCI_CMD_TBL_HDR_SZ = 0x80, - AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16), - AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS, - AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + - AHCI_RX_FIS_SZ, - AHCI_IRQ_ON_SG = (1 << 31), - AHCI_CMD_ATAPI = (1 << 5), - AHCI_CMD_WRITE = (1 << 6), - AHCI_CMD_PREFETCH = (1 << 7), - AHCI_CMD_RESET = (1 << 8), - AHCI_CMD_CLR_BUSY = (1 << 10), - - RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */ - RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */ - - board_ahci = 0, - board_ahci_vt8251 = 1, - - /* global controller registers */ - HOST_CAP = 0x00, /* host capabilities */ - HOST_CTL = 0x04, /* global host control */ - HOST_IRQ_STAT = 0x08, /* interrupt status */ - HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */ - HOST_VERSION = 0x10, /* AHCI spec. version compliancy */ - - /* HOST_CTL bits */ - HOST_RESET = (1 << 0), /* reset controller; self-clear */ - HOST_IRQ_EN = (1 << 1), /* global IRQ enable */ - HOST_AHCI_EN = (1 << 31), /* AHCI enabled */ - - /* HOST_CAP bits */ - HOST_CAP_CLO = (1 << 24), /* Command List Override support */ - HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */ - HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ - - /* registers for each SATA port */ - PORT_LST_ADDR = 0x00, /* command list DMA addr */ - PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */ - PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */ - PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */ - PORT_IRQ_STAT = 0x10, /* interrupt status */ - PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */ - PORT_CMD = 0x18, /* port command */ - PORT_TFDATA = 0x20, /* taskfile data */ - PORT_SIG = 0x24, /* device TF signature */ - PORT_CMD_ISSUE = 0x38, /* command issue */ - PORT_SCR = 0x28, /* SATA phy register block */ - PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */ - PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */ - PORT_SCR_ERR = 0x30, /* SATA phy register: SError */ - PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */ - - /* PORT_IRQ_{STAT,MASK} bits */ - PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */ - PORT_IRQ_TF_ERR = (1 << 30), /* task file error */ - PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */ - PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */ - PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */ - PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */ - PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */ - PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */ - - PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */ - PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */ - PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */ - PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */ - PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */ - PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */ - PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */ - PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */ - PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */ - - PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR | - PORT_IRQ_IF_ERR | - PORT_IRQ_CONNECT | - PORT_IRQ_PHYRDY | - PORT_IRQ_UNK_FIS, - PORT_IRQ_ERROR = PORT_IRQ_FREEZE | - PORT_IRQ_TF_ERR | - PORT_IRQ_HBUS_DATA_ERR, - DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | - PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | - PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS, - - /* PORT_CMD bits */ - PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */ - PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */ - PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */ - PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */ - PORT_CMD_CLO = (1 << 3), /* Command list override */ - PORT_CMD_POWER_ON = (1 << 2), /* Power up device */ - PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */ - PORT_CMD_START = (1 << 0), /* Enable port DMA engine */ - - PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */ - PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ - PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ - - /* hpriv->flags bits */ - AHCI_FLAG_MSI = (1 << 0), - - /* ap->flags bits */ - AHCI_FLAG_RESET_NEEDS_CLO = (1 << 24), - AHCI_FLAG_NO_NCQ = (1 << 25), -}; - -struct ahci_cmd_hdr { - u32 opts; - u32 status; - u32 tbl_addr; - u32 tbl_addr_hi; - u32 reserved[4]; -}; - -struct ahci_sg { - u32 addr; - u32 addr_hi; - u32 reserved; - u32 flags_size; -}; - -struct ahci_host_priv { - unsigned long flags; - u32 cap; /* cache of HOST_CAP register */ - u32 port_map; /* cache of HOST_PORTS_IMPL reg */ -}; - -struct ahci_port_priv { - struct ahci_cmd_hdr *cmd_slot; - dma_addr_t cmd_slot_dma; - void *cmd_tbl; - dma_addr_t cmd_tbl_dma; - void *rx_fis; - dma_addr_t rx_fis_dma; -}; - -static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg); -static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); -static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); -static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs); -static void ahci_irq_clear(struct ata_port *ap); -static int ahci_port_start(struct ata_port *ap); -static void ahci_port_stop(struct ata_port *ap); -static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf); -static void ahci_qc_prep(struct ata_queued_cmd *qc); -static u8 ahci_check_status(struct ata_port *ap); -static void ahci_freeze(struct ata_port *ap); -static void ahci_thaw(struct ata_port *ap); -static void ahci_error_handler(struct ata_port *ap); -static void ahci_post_internal_cmd(struct ata_queued_cmd *qc); -static void ahci_remove_one (struct pci_dev *pdev); - -static struct scsi_host_template ahci_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .change_queue_depth = ata_scsi_change_queue_depth, - .can_queue = AHCI_MAX_CMDS - 1, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = AHCI_MAX_SG, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = AHCI_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = AHCI_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - -static const struct ata_port_operations ahci_ops = { - .port_disable = ata_port_disable, - - .check_status = ahci_check_status, - .check_altstatus = ahci_check_status, - .dev_select = ata_noop_dev_select, - - .tf_read = ahci_tf_read, - - .qc_prep = ahci_qc_prep, - .qc_issue = ahci_qc_issue, - - .irq_handler = ahci_interrupt, - .irq_clear = ahci_irq_clear, - - .scr_read = ahci_scr_read, - .scr_write = ahci_scr_write, - - .freeze = ahci_freeze, - .thaw = ahci_thaw, - - .error_handler = ahci_error_handler, - .post_internal_cmd = ahci_post_internal_cmd, - - .port_start = ahci_port_start, - .port_stop = ahci_port_stop, -}; - -static const struct ata_port_info ahci_port_info[] = { - /* board_ahci */ - { - .sht = &ahci_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - ATA_FLAG_SKIP_D2H_BSY, - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &ahci_ops, - }, - /* board_ahci_vt8251 */ - { - .sht = &ahci_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - ATA_FLAG_SKIP_D2H_BSY | - AHCI_FLAG_RESET_NEEDS_CLO | AHCI_FLAG_NO_NCQ, - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &ahci_ops, - }, -}; - -static const struct pci_device_id ahci_pci_tbl[] = { - /* Intel */ - { PCI_VENDOR_ID_INTEL, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ICH6 */ - { PCI_VENDOR_ID_INTEL, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ICH6M */ - { PCI_VENDOR_ID_INTEL, 0x27c1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ICH7 */ - { PCI_VENDOR_ID_INTEL, 0x27c5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ICH7M */ - { PCI_VENDOR_ID_INTEL, 0x27c3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ICH7R */ - { PCI_VENDOR_ID_AL, 0x5288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ULi M5288 */ - { PCI_VENDOR_ID_INTEL, 0x2681, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ESB2 */ - { PCI_VENDOR_ID_INTEL, 0x2682, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ESB2 */ - { PCI_VENDOR_ID_INTEL, 0x2683, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ESB2 */ - { PCI_VENDOR_ID_INTEL, 0x27c6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ICH7-M DH */ - { PCI_VENDOR_ID_INTEL, 0x2821, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ICH8 */ - { PCI_VENDOR_ID_INTEL, 0x2822, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ICH8 */ - { PCI_VENDOR_ID_INTEL, 0x2824, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ICH8 */ - { PCI_VENDOR_ID_INTEL, 0x2829, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ICH8M */ - { PCI_VENDOR_ID_INTEL, 0x282a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ICH8M */ - - /* JMicron */ - { 0x197b, 0x2360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* JMicron JMB360 */ - { 0x197b, 0x2361, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* JMicron JMB361 */ - { 0x197b, 0x2363, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* JMicron JMB363 */ - { 0x197b, 0x2365, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* JMicron JMB365 */ - { 0x197b, 0x2366, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* JMicron JMB366 */ - - /* ATI */ - { PCI_VENDOR_ID_ATI, 0x4380, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ATI SB600 non-raid */ - { PCI_VENDOR_ID_ATI, 0x4381, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* ATI SB600 raid */ - - /* VIA */ - { PCI_VENDOR_ID_VIA, 0x3349, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci_vt8251 }, /* VIA VT8251 */ - - /* NVIDIA */ - { PCI_VENDOR_ID_NVIDIA, 0x044c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* MCP65 */ - { PCI_VENDOR_ID_NVIDIA, 0x044d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* MCP65 */ - { PCI_VENDOR_ID_NVIDIA, 0x044e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* MCP65 */ - { PCI_VENDOR_ID_NVIDIA, 0x044f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_ahci }, /* MCP65 */ - - { } /* terminate list */ -}; - - -static struct pci_driver ahci_pci_driver = { - .name = DRV_NAME, - .id_table = ahci_pci_tbl, - .probe = ahci_init_one, - .remove = ahci_remove_one, -}; - - -static inline unsigned long ahci_port_base_ul (unsigned long base, unsigned int port) -{ - return base + 0x100 + (port * 0x80); -} - -static inline void __iomem *ahci_port_base (void __iomem *base, unsigned int port) -{ - return (void __iomem *) ahci_port_base_ul((unsigned long)base, port); -} - -static int ahci_port_start(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct ahci_host_priv *hpriv = ap->host_set->private_data; - struct ahci_port_priv *pp; - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - void *mem; - dma_addr_t mem_dma; - int rc; - - pp = kmalloc(sizeof(*pp), GFP_KERNEL); - if (!pp) - return -ENOMEM; - memset(pp, 0, sizeof(*pp)); - - rc = ata_pad_alloc(ap, dev); - if (rc) { - kfree(pp); - return rc; - } - - mem = dma_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma, GFP_KERNEL); - if (!mem) { - ata_pad_free(ap, dev); - kfree(pp); - return -ENOMEM; - } - memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ); - - /* - * First item in chunk of DMA memory: 32-slot command table, - * 32 bytes each in size - */ - pp->cmd_slot = mem; - pp->cmd_slot_dma = mem_dma; - - mem += AHCI_CMD_SLOT_SZ; - mem_dma += AHCI_CMD_SLOT_SZ; - - /* - * Second item: Received-FIS area - */ - pp->rx_fis = mem; - pp->rx_fis_dma = mem_dma; - - mem += AHCI_RX_FIS_SZ; - mem_dma += AHCI_RX_FIS_SZ; - - /* - * Third item: data area for storing a single command - * and its scatter-gather table - */ - pp->cmd_tbl = mem; - pp->cmd_tbl_dma = mem_dma; - - ap->private_data = pp; - - if (hpriv->cap & HOST_CAP_64) - writel((pp->cmd_slot_dma >> 16) >> 16, port_mmio + PORT_LST_ADDR_HI); - writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR); - readl(port_mmio + PORT_LST_ADDR); /* flush */ - - if (hpriv->cap & HOST_CAP_64) - writel((pp->rx_fis_dma >> 16) >> 16, port_mmio + PORT_FIS_ADDR_HI); - writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR); - readl(port_mmio + PORT_FIS_ADDR); /* flush */ - - writel(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX | - PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP | - PORT_CMD_START, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ - - return 0; -} - - -static void ahci_port_stop(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct ahci_port_priv *pp = ap->private_data; - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - u32 tmp; - - tmp = readl(port_mmio + PORT_CMD); - tmp &= ~(PORT_CMD_START | PORT_CMD_FIS_RX); - writel(tmp, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ - - /* spec says 500 msecs for each PORT_CMD_{START,FIS_RX} bit, so - * this is slightly incorrect. - */ - msleep(500); - - ap->private_data = NULL; - dma_free_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, - pp->cmd_slot, pp->cmd_slot_dma); - ata_pad_free(ap, dev); - kfree(pp); -} - -static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg_in) -{ - unsigned int sc_reg; - - switch (sc_reg_in) { - case SCR_STATUS: sc_reg = 0; break; - case SCR_CONTROL: sc_reg = 1; break; - case SCR_ERROR: sc_reg = 2; break; - case SCR_ACTIVE: sc_reg = 3; break; - default: - return 0xffffffffU; - } - - return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); -} - - -static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in, - u32 val) -{ - unsigned int sc_reg; - - switch (sc_reg_in) { - case SCR_STATUS: sc_reg = 0; break; - case SCR_CONTROL: sc_reg = 1; break; - case SCR_ERROR: sc_reg = 2; break; - case SCR_ACTIVE: sc_reg = 3; break; - default: - return; - } - - writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); -} - -static int ahci_stop_engine(struct ata_port *ap) -{ - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - int work; - u32 tmp; - - tmp = readl(port_mmio + PORT_CMD); - tmp &= ~PORT_CMD_START; - writel(tmp, port_mmio + PORT_CMD); - - /* wait for engine to stop. TODO: this could be - * as long as 500 msec - */ - work = 1000; - while (work-- > 0) { - tmp = readl(port_mmio + PORT_CMD); - if ((tmp & PORT_CMD_LIST_ON) == 0) - return 0; - udelay(10); - } - - return -EIO; -} - -static void ahci_start_engine(struct ata_port *ap) -{ - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - u32 tmp; - - tmp = readl(port_mmio + PORT_CMD); - tmp |= PORT_CMD_START; - writel(tmp, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ -} - -static unsigned int ahci_dev_classify(struct ata_port *ap) -{ - void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; - struct ata_taskfile tf; - u32 tmp; - - tmp = readl(port_mmio + PORT_SIG); - tf.lbah = (tmp >> 24) & 0xff; - tf.lbam = (tmp >> 16) & 0xff; - tf.lbal = (tmp >> 8) & 0xff; - tf.nsect = (tmp) & 0xff; - - return ata_dev_classify(&tf); -} - -static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, - u32 opts) -{ - dma_addr_t cmd_tbl_dma; - - cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ; - - pp->cmd_slot[tag].opts = cpu_to_le32(opts); - pp->cmd_slot[tag].status = 0; - pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff); - pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16); -} - -static int ahci_clo(struct ata_port *ap) -{ - void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; - struct ahci_host_priv *hpriv = ap->host_set->private_data; - u32 tmp; - - if (!(hpriv->cap & HOST_CAP_CLO)) - return -EOPNOTSUPP; - - tmp = readl(port_mmio + PORT_CMD); - tmp |= PORT_CMD_CLO; - writel(tmp, port_mmio + PORT_CMD); - - tmp = ata_wait_register(port_mmio + PORT_CMD, - PORT_CMD_CLO, PORT_CMD_CLO, 1, 500); - if (tmp & PORT_CMD_CLO) - return -EIO; - - return 0; -} - -static int ahci_prereset(struct ata_port *ap) -{ - if ((ap->flags & AHCI_FLAG_RESET_NEEDS_CLO) && - (ata_busy_wait(ap, ATA_BUSY, 1000) & ATA_BUSY)) { - /* ATA_BUSY hasn't cleared, so send a CLO */ - ahci_clo(ap); - } - - return ata_std_prereset(ap); -} - -static int ahci_softreset(struct ata_port *ap, unsigned int *class) -{ - struct ahci_port_priv *pp = ap->private_data; - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - const u32 cmd_fis_len = 5; /* five dwords */ - const char *reason = NULL; - struct ata_taskfile tf; - u32 tmp; - u8 *fis; - int rc; - - DPRINTK("ENTER\n"); - - if (ata_port_offline(ap)) { - DPRINTK("PHY reports no device\n"); - *class = ATA_DEV_NONE; - return 0; - } - - /* prepare for SRST (AHCI-1.1 10.4.1) */ - rc = ahci_stop_engine(ap); - if (rc) { - reason = "failed to stop engine"; - goto fail_restart; - } - - /* check BUSY/DRQ, perform Command List Override if necessary */ - ahci_tf_read(ap, &tf); - if (tf.command & (ATA_BUSY | ATA_DRQ)) { - rc = ahci_clo(ap); - - if (rc == -EOPNOTSUPP) { - reason = "port busy but CLO unavailable"; - goto fail_restart; - } else if (rc) { - reason = "port busy but CLO failed"; - goto fail_restart; - } - } - - /* restart engine */ - ahci_start_engine(ap); - - ata_tf_init(ap->device, &tf); - fis = pp->cmd_tbl; - - /* issue the first D2H Register FIS */ - ahci_fill_cmd_slot(pp, 0, - cmd_fis_len | AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY); - - tf.ctl |= ATA_SRST; - ata_tf_to_fis(&tf, fis, 0); - fis[1] &= ~(1 << 7); /* turn off Command FIS bit */ - - writel(1, port_mmio + PORT_CMD_ISSUE); - - tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1, 1, 500); - if (tmp & 0x1) { - rc = -EIO; - reason = "1st FIS failed"; - goto fail; - } - - /* spec says at least 5us, but be generous and sleep for 1ms */ - msleep(1); - - /* issue the second D2H Register FIS */ - ahci_fill_cmd_slot(pp, 0, cmd_fis_len); - - tf.ctl &= ~ATA_SRST; - ata_tf_to_fis(&tf, fis, 0); - fis[1] &= ~(1 << 7); /* turn off Command FIS bit */ - - writel(1, port_mmio + PORT_CMD_ISSUE); - readl(port_mmio + PORT_CMD_ISSUE); /* flush */ - - /* spec mandates ">= 2ms" before checking status. - * We wait 150ms, because that was the magic delay used for - * ATAPI devices in Hale Landis's ATADRVR, for the period of time - * between when the ATA command register is written, and then - * status is checked. Because waiting for "a while" before - * checking status is fine, post SRST, we perform this magic - * delay here as well. - */ - msleep(150); - - *class = ATA_DEV_NONE; - if (ata_port_online(ap)) { - if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { - rc = -EIO; - reason = "device not ready"; - goto fail; - } - *class = ahci_dev_classify(ap); - } - - DPRINTK("EXIT, class=%u\n", *class); - return 0; - - fail_restart: - ahci_start_engine(ap); - fail: - ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason); - return rc; -} - -static int ahci_hardreset(struct ata_port *ap, unsigned int *class) -{ - struct ahci_port_priv *pp = ap->private_data; - u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; - struct ata_taskfile tf; - int rc; - - DPRINTK("ENTER\n"); - - ahci_stop_engine(ap); - - /* clear D2H reception area to properly wait for D2H FIS */ - ata_tf_init(ap->device, &tf); - tf.command = 0xff; - ata_tf_to_fis(&tf, d2h_fis, 0); - - rc = sata_std_hardreset(ap, class); - - ahci_start_engine(ap); - - if (rc == 0 && ata_port_online(ap)) - *class = ahci_dev_classify(ap); - if (*class == ATA_DEV_UNKNOWN) - *class = ATA_DEV_NONE; - - DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); - return rc; -} - -static void ahci_postreset(struct ata_port *ap, unsigned int *class) -{ - void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; - u32 new_tmp, tmp; - - ata_std_postreset(ap, class); - - /* Make sure port's ATAPI bit is set appropriately */ - new_tmp = tmp = readl(port_mmio + PORT_CMD); - if (*class == ATA_DEV_ATAPI) - new_tmp |= PORT_CMD_ATAPI; - else - new_tmp &= ~PORT_CMD_ATAPI; - if (new_tmp != tmp) { - writel(new_tmp, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ - } -} - -static u8 ahci_check_status(struct ata_port *ap) -{ - void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr; - - return readl(mmio + PORT_TFDATA) & 0xFF; -} - -static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ahci_port_priv *pp = ap->private_data; - u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; - - ata_tf_from_fis(d2h_fis, tf); -} - -static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl) -{ - struct scatterlist *sg; - struct ahci_sg *ahci_sg; - unsigned int n_sg = 0; - - VPRINTK("ENTER\n"); - - /* - * Next, the S/G list. - */ - ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ; - ata_for_each_sg(sg, qc) { - dma_addr_t addr = sg_dma_address(sg); - u32 sg_len = sg_dma_len(sg); - - ahci_sg->addr = cpu_to_le32(addr & 0xffffffff); - ahci_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16); - ahci_sg->flags_size = cpu_to_le32(sg_len - 1); - - ahci_sg++; - n_sg++; - } - - return n_sg; -} - -static void ahci_qc_prep(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct ahci_port_priv *pp = ap->private_data; - int is_atapi = is_atapi_taskfile(&qc->tf); - void *cmd_tbl; - u32 opts; - const u32 cmd_fis_len = 5; /* five dwords */ - unsigned int n_elem; - - /* - * Fill in command table information. First, the header, - * a SATA Register - Host to Device command FIS. - */ - cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ; - - ata_tf_to_fis(&qc->tf, cmd_tbl, 0); - if (is_atapi) { - memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); - memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len); - } - - n_elem = 0; - if (qc->flags & ATA_QCFLAG_DMAMAP) - n_elem = ahci_fill_sg(qc, cmd_tbl); - - /* - * Fill in command slot information. - */ - opts = cmd_fis_len | n_elem << 16; - if (qc->tf.flags & ATA_TFLAG_WRITE) - opts |= AHCI_CMD_WRITE; - if (is_atapi) - opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH; - - ahci_fill_cmd_slot(pp, qc->tag, opts); -} - -static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) -{ - struct ahci_port_priv *pp = ap->private_data; - struct ata_eh_info *ehi = &ap->eh_info; - unsigned int err_mask = 0, action = 0; - struct ata_queued_cmd *qc; - u32 serror; - - ata_ehi_clear_desc(ehi); - - /* AHCI needs SError cleared; otherwise, it might lock up */ - serror = ahci_scr_read(ap, SCR_ERROR); - ahci_scr_write(ap, SCR_ERROR, serror); - - /* analyze @irq_stat */ - ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat); - - if (irq_stat & PORT_IRQ_TF_ERR) - err_mask |= AC_ERR_DEV; - - if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) { - err_mask |= AC_ERR_HOST_BUS; - action |= ATA_EH_SOFTRESET; - } - - if (irq_stat & PORT_IRQ_IF_ERR) { - err_mask |= AC_ERR_ATA_BUS; - action |= ATA_EH_SOFTRESET; - ata_ehi_push_desc(ehi, ", interface fatal error"); - } - - if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) { - ata_ehi_hotplugged(ehi); - ata_ehi_push_desc(ehi, ", %s", irq_stat & PORT_IRQ_CONNECT ? - "connection status changed" : "PHY RDY changed"); - } - - if (irq_stat & PORT_IRQ_UNK_FIS) { - u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK); - - err_mask |= AC_ERR_HSM; - action |= ATA_EH_SOFTRESET; - ata_ehi_push_desc(ehi, ", unknown FIS %08x %08x %08x %08x", - unk[0], unk[1], unk[2], unk[3]); - } - - /* okay, let's hand over to EH */ - ehi->serror |= serror; - ehi->action |= action; - - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc) - qc->err_mask |= err_mask; - else - ehi->err_mask |= err_mask; - - if (irq_stat & PORT_IRQ_FREEZE) - ata_port_freeze(ap); - else - ata_port_abort(ap); -} - -static void ahci_host_intr(struct ata_port *ap) -{ - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - struct ata_eh_info *ehi = &ap->eh_info; - u32 status, qc_active; - int rc; - - status = readl(port_mmio + PORT_IRQ_STAT); - writel(status, port_mmio + PORT_IRQ_STAT); - - if (unlikely(status & PORT_IRQ_ERROR)) { - ahci_error_intr(ap, status); - return; - } - - if (ap->sactive) - qc_active = readl(port_mmio + PORT_SCR_ACT); - else - qc_active = readl(port_mmio + PORT_CMD_ISSUE); - - rc = ata_qc_complete_multiple(ap, qc_active, NULL); - if (rc > 0) - return; - if (rc < 0) { - ehi->err_mask |= AC_ERR_HSM; - ehi->action |= ATA_EH_SOFTRESET; - ata_port_freeze(ap); - return; - } - - /* hmmm... a spurious interupt */ - - /* some devices send D2H reg with I bit set during NCQ command phase */ - if (ap->sactive && status & PORT_IRQ_D2H_REG_FIS) - return; - - /* ignore interim PIO setup fis interrupts */ - if (ata_tag_valid(ap->active_tag)) { - struct ata_queued_cmd *qc = - ata_qc_from_tag(ap, ap->active_tag); - - if (qc && qc->tf.protocol == ATA_PROT_PIO && - (status & PORT_IRQ_PIOS_FIS)) - return; - } - - if (ata_ratelimit()) - ata_port_printk(ap, KERN_INFO, "spurious interrupt " - "(irq_stat 0x%x active_tag %d sactive 0x%x)\n", - status, ap->active_tag, ap->sactive); -} - -static void ahci_irq_clear(struct ata_port *ap) -{ - /* TODO */ -} - -static irqreturn_t ahci_interrupt(int irq, void *dev_instance, struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - struct ahci_host_priv *hpriv; - unsigned int i, handled = 0; - void __iomem *mmio; - u32 irq_stat, irq_ack = 0; - - VPRINTK("ENTER\n"); - - hpriv = host_set->private_data; - mmio = host_set->mmio_base; - - /* sigh. 0xffffffff is a valid return from h/w */ - irq_stat = readl(mmio + HOST_IRQ_STAT); - irq_stat &= hpriv->port_map; - if (!irq_stat) - return IRQ_NONE; - - spin_lock(&host_set->lock); - - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap; - - if (!(irq_stat & (1 << i))) - continue; - - ap = host_set->ports[i]; - if (ap) { - ahci_host_intr(ap); - VPRINTK("port %u\n", i); - } else { - VPRINTK("port %u (no irq)\n", i); - if (ata_ratelimit()) - dev_printk(KERN_WARNING, host_set->dev, - "interrupt on disabled port %u\n", i); - } - - irq_ack |= (1 << i); - } - - if (irq_ack) { - writel(irq_ack, mmio + HOST_IRQ_STAT); - handled = 1; - } - - spin_unlock(&host_set->lock); - - VPRINTK("EXIT\n"); - - return IRQ_RETVAL(handled); -} - -static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; - - if (qc->tf.protocol == ATA_PROT_NCQ) - writel(1 << qc->tag, port_mmio + PORT_SCR_ACT); - writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE); - readl(port_mmio + PORT_CMD_ISSUE); /* flush */ - - return 0; -} - -static void ahci_freeze(struct ata_port *ap) -{ - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - - /* turn IRQ off */ - writel(0, port_mmio + PORT_IRQ_MASK); -} - -static void ahci_thaw(struct ata_port *ap) -{ - void __iomem *mmio = ap->host_set->mmio_base; - void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); - u32 tmp; - - /* clear IRQ */ - tmp = readl(port_mmio + PORT_IRQ_STAT); - writel(tmp, port_mmio + PORT_IRQ_STAT); - writel(1 << ap->id, mmio + HOST_IRQ_STAT); - - /* turn IRQ back on */ - writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK); -} - -static void ahci_error_handler(struct ata_port *ap) -{ - if (!(ap->flags & ATA_FLAG_FROZEN)) { - /* restart engine */ - ahci_stop_engine(ap); - ahci_start_engine(ap); - } - - /* perform recovery */ - ata_do_eh(ap, ahci_prereset, ahci_softreset, ahci_hardreset, - ahci_postreset); -} - -static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - if (qc->flags & ATA_QCFLAG_FAILED) - qc->err_mask |= AC_ERR_OTHER; - - if (qc->err_mask) { - /* make DMA engine forget about the failed command */ - ahci_stop_engine(ap); - ahci_start_engine(ap); - } -} - -static void ahci_setup_port(struct ata_ioports *port, unsigned long base, - unsigned int port_idx) -{ - VPRINTK("ENTER, base==0x%lx, port_idx %u\n", base, port_idx); - base = ahci_port_base_ul(base, port_idx); - VPRINTK("base now==0x%lx\n", base); - - port->cmd_addr = base; - port->scr_addr = base + PORT_SCR; - - VPRINTK("EXIT\n"); -} - -static int ahci_host_init(struct ata_probe_ent *probe_ent) -{ - struct ahci_host_priv *hpriv = probe_ent->private_data; - struct pci_dev *pdev = to_pci_dev(probe_ent->dev); - void __iomem *mmio = probe_ent->mmio_base; - u32 tmp, cap_save; - unsigned int i, j, using_dac; - int rc; - void __iomem *port_mmio; - - cap_save = readl(mmio + HOST_CAP); - cap_save &= ( (1<<28) | (1<<17) ); - cap_save |= (1 << 27); - - /* global controller reset */ - tmp = readl(mmio + HOST_CTL); - if ((tmp & HOST_RESET) == 0) { - writel(tmp | HOST_RESET, mmio + HOST_CTL); - readl(mmio + HOST_CTL); /* flush */ - } - - /* reset must complete within 1 second, or - * the hardware should be considered fried. - */ - ssleep(1); - - tmp = readl(mmio + HOST_CTL); - if (tmp & HOST_RESET) { - dev_printk(KERN_ERR, &pdev->dev, - "controller reset failed (0x%x)\n", tmp); - return -EIO; - } - - writel(HOST_AHCI_EN, mmio + HOST_CTL); - (void) readl(mmio + HOST_CTL); /* flush */ - writel(cap_save, mmio + HOST_CAP); - writel(0xf, mmio + HOST_PORTS_IMPL); - (void) readl(mmio + HOST_PORTS_IMPL); /* flush */ - - if (pdev->vendor == PCI_VENDOR_ID_INTEL) { - u16 tmp16; - - pci_read_config_word(pdev, 0x92, &tmp16); - tmp16 |= 0xf; - pci_write_config_word(pdev, 0x92, tmp16); - } - - hpriv->cap = readl(mmio + HOST_CAP); - hpriv->port_map = readl(mmio + HOST_PORTS_IMPL); - probe_ent->n_ports = (hpriv->cap & 0x1f) + 1; - - VPRINTK("cap 0x%x port_map 0x%x n_ports %d\n", - hpriv->cap, hpriv->port_map, probe_ent->n_ports); - - using_dac = hpriv->cap & HOST_CAP_64; - if (using_dac && - !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { - rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); - if (rc) { - rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "64-bit DMA enable failed\n"); - return rc; - } - } - } else { - rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit DMA enable failed\n"); - return rc; - } - rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit consistent DMA enable failed\n"); - return rc; - } - } - - for (i = 0; i < probe_ent->n_ports; i++) { -#if 0 /* BIOSen initialize this incorrectly */ - if (!(hpriv->port_map & (1 << i))) - continue; -#endif - - port_mmio = ahci_port_base(mmio, i); - VPRINTK("mmio %p port_mmio %p\n", mmio, port_mmio); - - ahci_setup_port(&probe_ent->port[i], - (unsigned long) mmio, i); - - /* make sure port is not active */ - tmp = readl(port_mmio + PORT_CMD); - VPRINTK("PORT_CMD 0x%x\n", tmp); - if (tmp & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON | - PORT_CMD_FIS_RX | PORT_CMD_START)) { - tmp &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON | - PORT_CMD_FIS_RX | PORT_CMD_START); - writel(tmp, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ - - /* spec says 500 msecs for each bit, so - * this is slightly incorrect. - */ - msleep(500); - } - - writel(PORT_CMD_SPIN_UP, port_mmio + PORT_CMD); - - j = 0; - while (j < 100) { - msleep(10); - tmp = readl(port_mmio + PORT_SCR_STAT); - if ((tmp & 0xf) == 0x3) - break; - j++; - } - - tmp = readl(port_mmio + PORT_SCR_ERR); - VPRINTK("PORT_SCR_ERR 0x%x\n", tmp); - writel(tmp, port_mmio + PORT_SCR_ERR); - - /* ack any pending irq events for this port */ - tmp = readl(port_mmio + PORT_IRQ_STAT); - VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); - if (tmp) - writel(tmp, port_mmio + PORT_IRQ_STAT); - - writel(1 << i, mmio + HOST_IRQ_STAT); - } - - tmp = readl(mmio + HOST_CTL); - VPRINTK("HOST_CTL 0x%x\n", tmp); - writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); - tmp = readl(mmio + HOST_CTL); - VPRINTK("HOST_CTL 0x%x\n", tmp); - - pci_set_master(pdev); - - return 0; -} - -static void ahci_print_info(struct ata_probe_ent *probe_ent) -{ - struct ahci_host_priv *hpriv = probe_ent->private_data; - struct pci_dev *pdev = to_pci_dev(probe_ent->dev); - void __iomem *mmio = probe_ent->mmio_base; - u32 vers, cap, impl, speed; - const char *speed_s; - u16 cc; - const char *scc_s; - - vers = readl(mmio + HOST_VERSION); - cap = hpriv->cap; - impl = hpriv->port_map; - - speed = (cap >> 20) & 0xf; - if (speed == 1) - speed_s = "1.5"; - else if (speed == 2) - speed_s = "3"; - else - speed_s = "?"; - - pci_read_config_word(pdev, 0x0a, &cc); - if (cc == 0x0101) - scc_s = "IDE"; - else if (cc == 0x0106) - scc_s = "SATA"; - else if (cc == 0x0104) - scc_s = "RAID"; - else - scc_s = "unknown"; - - dev_printk(KERN_INFO, &pdev->dev, - "AHCI %02x%02x.%02x%02x " - "%u slots %u ports %s Gbps 0x%x impl %s mode\n" - , - - (vers >> 24) & 0xff, - (vers >> 16) & 0xff, - (vers >> 8) & 0xff, - vers & 0xff, - - ((cap >> 8) & 0x1f) + 1, - (cap & 0x1f) + 1, - speed_s, - impl, - scc_s); - - dev_printk(KERN_INFO, &pdev->dev, - "flags: " - "%s%s%s%s%s%s" - "%s%s%s%s%s%s%s\n" - , - - cap & (1 << 31) ? "64bit " : "", - cap & (1 << 30) ? "ncq " : "", - cap & (1 << 28) ? "ilck " : "", - cap & (1 << 27) ? "stag " : "", - cap & (1 << 26) ? "pm " : "", - cap & (1 << 25) ? "led " : "", - - cap & (1 << 24) ? "clo " : "", - cap & (1 << 19) ? "nz " : "", - cap & (1 << 18) ? "only " : "", - cap & (1 << 17) ? "pmp " : "", - cap & (1 << 15) ? "pio " : "", - cap & (1 << 14) ? "slum " : "", - cap & (1 << 13) ? "part " : "" - ); -} - -static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version; - struct ata_probe_ent *probe_ent = NULL; - struct ahci_host_priv *hpriv; - unsigned long base; - void __iomem *mmio_base; - unsigned int board_idx = (unsigned int) ent->driver_data; - int have_msi, pci_dev_busy = 0; - int rc; - - VPRINTK("ENTER\n"); - - WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS); - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out; - } - - if (pci_enable_msi(pdev) == 0) - have_msi = 1; - else { - pci_intx(pdev, 1); - have_msi = 0; - } - - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) { - rc = -ENOMEM; - goto err_out_msi; - } - - memset(probe_ent, 0, sizeof(*probe_ent)); - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - mmio_base = pci_iomap(pdev, AHCI_PCI_BAR, 0); - if (mmio_base == NULL) { - rc = -ENOMEM; - goto err_out_free_ent; - } - base = (unsigned long) mmio_base; - - hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL); - if (!hpriv) { - rc = -ENOMEM; - goto err_out_iounmap; - } - memset(hpriv, 0, sizeof(*hpriv)); - - probe_ent->sht = ahci_port_info[board_idx].sht; - probe_ent->host_flags = ahci_port_info[board_idx].host_flags; - probe_ent->pio_mask = ahci_port_info[board_idx].pio_mask; - probe_ent->udma_mask = ahci_port_info[board_idx].udma_mask; - probe_ent->port_ops = ahci_port_info[board_idx].port_ops; - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = SA_SHIRQ; - probe_ent->mmio_base = mmio_base; - probe_ent->private_data = hpriv; - - if (have_msi) - hpriv->flags |= AHCI_FLAG_MSI; - - /* JMicron-specific fixup: make sure we're in AHCI mode */ - if (pdev->vendor == 0x197b) - pci_write_config_byte(pdev, 0x41, 0xa1); - - /* initialize adapter */ - rc = ahci_host_init(probe_ent); - if (rc) - goto err_out_hpriv; - - if (!(probe_ent->host_flags & AHCI_FLAG_NO_NCQ) && - (hpriv->cap & HOST_CAP_NCQ)) - probe_ent->host_flags |= ATA_FLAG_NCQ; - - ahci_print_info(probe_ent); - - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - kfree(probe_ent); - - return 0; - -err_out_hpriv: - kfree(hpriv); -err_out_iounmap: - pci_iounmap(pdev, mmio_base); -err_out_free_ent: - kfree(probe_ent); -err_out_msi: - if (have_msi) - pci_disable_msi(pdev); - else - pci_intx(pdev, 0); - pci_release_regions(pdev); -err_out: - if (!pci_dev_busy) - pci_disable_device(pdev); - return rc; -} - -static void ahci_remove_one (struct pci_dev *pdev) -{ - struct device *dev = pci_dev_to_dev(pdev); - struct ata_host_set *host_set = dev_get_drvdata(dev); - struct ahci_host_priv *hpriv = host_set->private_data; - unsigned int i; - int have_msi; - - for (i = 0; i < host_set->n_ports; i++) - ata_port_detach(host_set->ports[i]); - - have_msi = hpriv->flags & AHCI_FLAG_MSI; - free_irq(host_set->irq, host_set); - - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; - - ata_scsi_release(ap->host); - scsi_host_put(ap->host); - } - - kfree(hpriv); - pci_iounmap(pdev, host_set->mmio_base); - kfree(host_set); - - if (have_msi) - pci_disable_msi(pdev); - else - pci_intx(pdev, 0); - pci_release_regions(pdev); - pci_disable_device(pdev); - dev_set_drvdata(dev, NULL); -} - -static int __init ahci_init(void) -{ - return pci_module_init(&ahci_pci_driver); -} - -static void __exit ahci_exit(void) -{ - pci_unregister_driver(&ahci_pci_driver); -} - - -MODULE_AUTHOR("Jeff Garzik"); -MODULE_DESCRIPTION("AHCI SATA low-level driver"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, ahci_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -module_init(ahci_init); -module_exit(ahci_exit); diff --git a/drivers/scsi/aic7xxx/aic7770_osm.c b/drivers/scsi/aic7xxx/aic7770_osm.c index d754b326786..1ac119733ba 100644 --- a/drivers/scsi/aic7xxx/aic7770_osm.c +++ b/drivers/scsi/aic7xxx/aic7770_osm.c @@ -65,7 +65,7 @@ aic7770_map_int(struct ahc_softc *ahc, u_int irq) shared = 0; if ((ahc->flags & AHC_EDGE_INTERRUPT) == 0) - shared = SA_SHIRQ; + shared = IRQF_SHARED; error = request_irq(irq, ahc_linux_isr, shared, "aic7xxx", ahc); if (error == 0) @@ -132,7 +132,8 @@ static struct eisa_device_id aic7770_ids[] = { { "ADP7770", 5 }, /* AIC7770 generic */ { "" } }; - +MODULE_DEVICE_TABLE(eisa, aic7770_ids); + static struct eisa_driver aic7770_driver = { .id_table = aic7770_ids, .driver = { diff --git a/drivers/scsi/aic7xxx/aic79xx.h b/drivers/scsi/aic7xxx/aic79xx.h index eb774569268..df3346b5caf 100644 --- a/drivers/scsi/aic7xxx/aic79xx.h +++ b/drivers/scsi/aic7xxx/aic79xx.h @@ -1487,6 +1487,7 @@ typedef enum { } ahd_queue_alg; void ahd_set_tags(struct ahd_softc *ahd, + struct scsi_cmnd *cmd, struct ahd_devinfo *devinfo, ahd_queue_alg alg); diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c index 801fc81d0b2..653818d2f80 100644 --- a/drivers/scsi/aic7xxx/aic79xx_core.c +++ b/drivers/scsi/aic7xxx/aic79xx_core.c @@ -1090,7 +1090,7 @@ ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat) /* Notify XPT */ ahd_send_async(ahd, devinfo.channel, devinfo.target, - CAM_LUN_WILDCARD, AC_SENT_BDR, NULL); + CAM_LUN_WILDCARD, AC_SENT_BDR); /* * Allow the sequencer to continue with @@ -3062,7 +3062,7 @@ ahd_set_syncrate(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, tinfo->curr.ppr_options = ppr_options; ahd_send_async(ahd, devinfo->channel, devinfo->target, - CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL); + CAM_LUN_WILDCARD, AC_TRANSFER_NEG); if (bootverbose) { if (offset != 0) { int options; @@ -3184,7 +3184,7 @@ ahd_set_width(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, tinfo->curr.width = width; ahd_send_async(ahd, devinfo->channel, devinfo->target, - CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL); + CAM_LUN_WILDCARD, AC_TRANSFER_NEG); if (bootverbose) { printf("%s: target %d using %dbit transfers\n", ahd_name(ahd), devinfo->target, @@ -3211,12 +3211,14 @@ ahd_set_width(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, * Update the current state of tagged queuing for a given target. */ void -ahd_set_tags(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, - ahd_queue_alg alg) +ahd_set_tags(struct ahd_softc *ahd, struct scsi_cmnd *cmd, + struct ahd_devinfo *devinfo, ahd_queue_alg alg) { - ahd_platform_set_tags(ahd, devinfo, alg); + struct scsi_device *sdev = cmd->device; + + ahd_platform_set_tags(ahd, sdev, devinfo, alg); ahd_send_async(ahd, devinfo->channel, devinfo->target, - devinfo->lun, AC_TRANSFER_NEG, &alg); + devinfo->lun, AC_TRANSFER_NEG); } static void @@ -4746,7 +4748,7 @@ ahd_handle_msg_reject(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) printf("(%s:%c:%d:%d): refuses tagged commands. " "Performing non-tagged I/O\n", ahd_name(ahd), devinfo->channel, devinfo->target, devinfo->lun); - ahd_set_tags(ahd, devinfo, AHD_QUEUE_NONE); + ahd_set_tags(ahd, scb->io_ctx, devinfo, AHD_QUEUE_NONE); mask = ~0x23; } else { printf("(%s:%c:%d:%d): refuses %s tagged commands. " @@ -4754,7 +4756,7 @@ ahd_handle_msg_reject(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) ahd_name(ahd), devinfo->channel, devinfo->target, devinfo->lun, tag_type == MSG_ORDERED_TASK ? "ordered" : "head of queue"); - ahd_set_tags(ahd, devinfo, AHD_QUEUE_BASIC); + ahd_set_tags(ahd, scb->io_ctx, devinfo, AHD_QUEUE_BASIC); mask = ~0x03; } @@ -5098,7 +5100,7 @@ ahd_handle_devreset(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, if (status != CAM_SEL_TIMEOUT) ahd_send_async(ahd, devinfo->channel, devinfo->target, - CAM_LUN_WILDCARD, AC_SENT_BDR, NULL); + CAM_LUN_WILDCARD, AC_SENT_BDR); if (message != NULL && bootverbose) printf("%s: %s on %c:%d. %d SCBs aborted\n", ahd_name(ahd), @@ -7287,7 +7289,7 @@ ahd_reset_cmds_pending(struct ahd_softc *ahd) ahd->flags &= ~AHD_UPDATE_PEND_CMDS; } -void +static void ahd_done_with_status(struct ahd_softc *ahd, struct scb *scb, uint32_t status) { cam_status ostat; @@ -7952,7 +7954,7 @@ ahd_reset_channel(struct ahd_softc *ahd, char channel, int initiate_reset) #endif /* Notify the XPT that a bus reset occurred */ ahd_send_async(ahd, devinfo.channel, CAM_TARGET_WILDCARD, - CAM_LUN_WILDCARD, AC_BUS_RESET, NULL); + CAM_LUN_WILDCARD, AC_BUS_RESET); /* * Revert to async/narrow transfers until we renegotiate. diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c index e0ccdf36220..c7eeaced324 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm.c +++ b/drivers/scsi/aic7xxx/aic79xx_osm.c @@ -243,25 +243,6 @@ ahd_print_path(struct ahd_softc *ahd, struct scb *scb) static uint32_t aic79xx_no_reset; /* - * Certain PCI motherboards will scan PCI devices from highest to lowest, - * others scan from lowest to highest, and they tend to do all kinds of - * strange things when they come into contact with PCI bridge chips. The - * net result of all this is that the PCI card that is actually used to boot - * the machine is very hard to detect. Most motherboards go from lowest - * PCI slot number to highest, and the first SCSI controller found is the - * one you boot from. The only exceptions to this are when a controller - * has its BIOS disabled. So, we by default sort all of our SCSI controllers - * from lowest PCI slot number to highest PCI slot number. We also force - * all controllers with their BIOS disabled to the end of the list. This - * works on *almost* all computers. Where it doesn't work, we have this - * option. Setting this option to non-0 will reverse the order of the sort - * to highest first, then lowest, but will still leave cards with their BIOS - * disabled at the very end. That should fix everyone up unless there are - * really strange cirumstances. - */ -static uint32_t aic79xx_reverse_scan; - -/* * Should we force EXTENDED translation on a controller. * 0 == Use whatever is in the SEEPROM or default to off * 1 == Use whatever is in the SEEPROM or default to on @@ -340,7 +321,7 @@ MODULE_LICENSE("Dual BSD/GPL"); MODULE_VERSION(AIC79XX_DRIVER_VERSION); module_param(aic79xx, charp, 0444); MODULE_PARM_DESC(aic79xx, -"period delimited, options string.\n" +"period-delimited options string:\n" " verbose Enable verbose/diagnostic logging\n" " allow_memio Allow device registers to be memory mapped\n" " debug Bitmask of debug values to enable\n" @@ -350,7 +331,6 @@ MODULE_PARM_DESC(aic79xx, " periodically to prevent tag starvation.\n" " This may be required by some older disk\n" " or drives/RAID arrays.\n" -" reverse_scan Sort PCI devices highest Bus/Slot to lowest\n" " tag_info:<tag_str> Set per-target tag depth\n" " global_tag_depth:<int> Global tag depth for all targets on all buses\n" " slewrate:<slewrate_list>Set the signal slew rate (0-15).\n" @@ -366,7 +346,7 @@ MODULE_PARM_DESC(aic79xx, " Shorten the selection timeout to 128ms\n" "\n" " options aic79xx 'aic79xx=verbose.tag_info:{{}.{}.{..10}}.seltime:1'\n" -"\n"); +); static void ahd_linux_handle_scsi_status(struct ahd_softc *, struct scsi_device *, @@ -484,7 +464,6 @@ ahd_linux_target_alloc(struct scsi_target *starget) struct seeprom_config *sc = ahd->seep_config; unsigned long flags; struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget); - struct ahd_linux_target *targ = scsi_transport_target_data(starget); struct ahd_devinfo devinfo; struct ahd_initiator_tinfo *tinfo; struct ahd_tmode_tstate *tstate; @@ -495,7 +474,6 @@ ahd_linux_target_alloc(struct scsi_target *starget) BUG_ON(*ahd_targp != NULL); *ahd_targp = starget; - memset(targ, 0, sizeof(*targ)); if (sc) { int flags = sc->device_flags[starget->id]; @@ -551,15 +529,11 @@ ahd_linux_slave_alloc(struct scsi_device *sdev) { struct ahd_softc *ahd = *((struct ahd_softc **)sdev->host->hostdata); - struct scsi_target *starget = sdev->sdev_target; - struct ahd_linux_target *targ = scsi_transport_target_data(starget); struct ahd_linux_device *dev; if (bootverbose) printf("%s: Slave Alloc %d\n", ahd_name(ahd), sdev->id); - BUG_ON(targ->sdev[sdev->lun] != NULL); - dev = scsi_transport_device_data(sdev); memset(dev, 0, sizeof(*dev)); @@ -576,8 +550,6 @@ ahd_linux_slave_alloc(struct scsi_device *sdev) */ dev->maxtags = 0; - targ->sdev[sdev->lun] = sdev; - return (0); } @@ -599,23 +571,6 @@ ahd_linux_slave_configure(struct scsi_device *sdev) return 0; } -static void -ahd_linux_slave_destroy(struct scsi_device *sdev) -{ - struct ahd_softc *ahd; - struct ahd_linux_device *dev = scsi_transport_device_data(sdev); - struct ahd_linux_target *targ = scsi_transport_target_data(sdev->sdev_target); - - ahd = *((struct ahd_softc **)sdev->host->hostdata); - if (bootverbose) - printf("%s: Slave Destroy %d\n", ahd_name(ahd), sdev->id); - - BUG_ON(dev->active); - - targ->sdev[sdev->lun] = NULL; - -} - #if defined(__i386__) /* * Return the disk geometry for the given SCSI device. @@ -822,7 +777,6 @@ struct scsi_host_template aic79xx_driver_template = { .use_clustering = ENABLE_CLUSTERING, .slave_alloc = ahd_linux_slave_alloc, .slave_configure = ahd_linux_slave_configure, - .slave_destroy = ahd_linux_slave_destroy, .target_alloc = ahd_linux_target_alloc, .target_destroy = ahd_linux_target_destroy, }; @@ -1057,7 +1011,6 @@ aic79xx_setup(char *s) #ifdef AHD_DEBUG { "debug", &ahd_debug }, #endif - { "reverse_scan", &aic79xx_reverse_scan }, { "periodic_otag", &aic79xx_periodic_otag }, { "pci_parity", &aic79xx_pci_parity }, { "seltime", &aic79xx_seltime }, @@ -1249,20 +1202,13 @@ void ahd_platform_free(struct ahd_softc *ahd) { struct scsi_target *starget; - int i, j; + int i; if (ahd->platform_data != NULL) { /* destroy all of the device and target objects */ for (i = 0; i < AHD_NUM_TARGETS; i++) { starget = ahd->platform_data->starget[i]; if (starget != NULL) { - for (j = 0; j < AHD_NUM_LUNS; j++) { - struct ahd_linux_target *targ = - scsi_transport_target_data(starget); - if (targ->sdev[j] == NULL) - continue; - targ->sdev[j] = NULL; - } ahd->platform_data->starget[i] = NULL; } } @@ -1318,20 +1264,13 @@ ahd_platform_freeze_devq(struct ahd_softc *ahd, struct scb *scb) } void -ahd_platform_set_tags(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, - ahd_queue_alg alg) +ahd_platform_set_tags(struct ahd_softc *ahd, struct scsi_device *sdev, + struct ahd_devinfo *devinfo, ahd_queue_alg alg) { - struct scsi_target *starget; - struct ahd_linux_target *targ; struct ahd_linux_device *dev; - struct scsi_device *sdev; int was_queuing; int now_queuing; - starget = ahd->platform_data->starget[devinfo->target]; - targ = scsi_transport_target_data(starget); - BUG_ON(targ == NULL); - sdev = targ->sdev[devinfo->lun]; if (sdev == NULL) return; @@ -1467,11 +1406,15 @@ ahd_linux_device_queue_depth(struct scsi_device *sdev) tags = ahd_linux_user_tagdepth(ahd, &devinfo); if (tags != 0 && sdev->tagged_supported != 0) { - ahd_set_tags(ahd, &devinfo, AHD_QUEUE_TAGGED); + ahd_platform_set_tags(ahd, sdev, &devinfo, AHD_QUEUE_TAGGED); + ahd_send_async(ahd, devinfo.channel, devinfo.target, + devinfo.lun, AC_TRANSFER_NEG); ahd_print_devinfo(ahd, &devinfo); printf("Tagged Queuing enabled. Depth %d\n", tags); } else { - ahd_set_tags(ahd, &devinfo, AHD_QUEUE_NONE); + ahd_platform_set_tags(ahd, sdev, &devinfo, AHD_QUEUE_NONE); + ahd_send_async(ahd, devinfo.channel, devinfo.target, + devinfo.lun, AC_TRANSFER_NEG); } } @@ -1629,7 +1572,7 @@ ahd_linux_isr(int irq, void *dev_id, struct pt_regs * regs) void ahd_send_async(struct ahd_softc *ahd, char channel, - u_int target, u_int lun, ac_code code, void *arg) + u_int target, u_int lun, ac_code code) { switch (code) { case AC_TRANSFER_NEG: @@ -1956,7 +1899,7 @@ ahd_linux_handle_scsi_status(struct ahd_softc *ahd, } ahd_set_transaction_status(scb, CAM_REQUEUE_REQ); ahd_set_scsi_status(scb, SCSI_STATUS_OK); - ahd_platform_set_tags(ahd, &devinfo, + ahd_platform_set_tags(ahd, sdev, &devinfo, (dev->flags & AHD_DEV_Q_BASIC) ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED); break; @@ -1966,7 +1909,7 @@ ahd_linux_handle_scsi_status(struct ahd_softc *ahd, * as if the target returned BUSY SCSI status. */ dev->openings = 1; - ahd_platform_set_tags(ahd, &devinfo, + ahd_platform_set_tags(ahd, sdev, &devinfo, (dev->flags & AHD_DEV_Q_BASIC) ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED); ahd_set_scsi_status(scb, SCSI_STATUS_BUSY); @@ -2778,8 +2721,6 @@ ahd_linux_init(void) if (!ahd_linux_transport_template) return -ENODEV; - scsi_transport_reserve_target(ahd_linux_transport_template, - sizeof(struct ahd_linux_target)); scsi_transport_reserve_device(ahd_linux_transport_template, sizeof(struct ahd_linux_device)); diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.h b/drivers/scsi/aic7xxx/aic79xx_osm.h index 2b8331649ee..601340d8441 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm.h +++ b/drivers/scsi/aic7xxx/aic79xx_osm.h @@ -42,7 +42,6 @@ #ifndef _AIC79XX_LINUX_H_ #define _AIC79XX_LINUX_H_ -#include <linux/config.h> #include <linux/types.h> #include <linux/blkdev.h> #include <linux/delay.h> @@ -94,7 +93,6 @@ #endif /********************************** Misc Macros *******************************/ -#define roundup(x, y) ((((x)+((y)-1))/(y))*(y)) #define powerof2(x) ((((x)-1)&(x))==0) /************************* Forward Declarations *******************************/ @@ -263,7 +261,6 @@ typedef enum { AHD_DEV_PERIODIC_OTAG = 0x40, /* Send OTAG to prevent starvation */ } ahd_linux_dev_flags; -struct ahd_linux_target; struct ahd_linux_device { TAILQ_ENTRY(ahd_linux_device) links; @@ -343,12 +340,6 @@ struct ahd_linux_device { #define AHD_OTAG_THRESH 500 }; -struct ahd_linux_target { - struct scsi_device *sdev[AHD_NUM_LUNS]; - struct ahd_transinfo last_tinfo; - struct ahd_softc *ahd; -}; - /********************* Definitions Required by the Core ***********************/ /* * Number of SG segments we require. So long as the S/G segments for @@ -865,7 +856,7 @@ ahd_freeze_scb(struct scb *scb) } } -void ahd_platform_set_tags(struct ahd_softc *ahd, +void ahd_platform_set_tags(struct ahd_softc *ahd, struct scsi_device *sdev, struct ahd_devinfo *devinfo, ahd_queue_alg); int ahd_platform_abort_scbs(struct ahd_softc *ahd, int target, char channel, int lun, u_int tag, @@ -874,7 +865,7 @@ irqreturn_t ahd_linux_isr(int irq, void *dev_id, struct pt_regs * regs); void ahd_done(struct ahd_softc*, struct scb*); void ahd_send_async(struct ahd_softc *, char channel, - u_int target, u_int lun, ac_code, void *); + u_int target, u_int lun, ac_code); void ahd_print_path(struct ahd_softc *, struct scb *); #ifdef CONFIG_PCI diff --git a/drivers/scsi/aic7xxx/aic79xx_osm_pci.c b/drivers/scsi/aic7xxx/aic79xx_osm_pci.c index ebbf7e4ff4c..50a41eda580 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm_pci.c +++ b/drivers/scsi/aic7xxx/aic79xx_osm_pci.c @@ -342,7 +342,7 @@ ahd_pci_map_int(struct ahd_softc *ahd) int error; error = request_irq(ahd->dev_softc->irq, ahd_linux_isr, - SA_SHIRQ, "aic79xx", ahd); + IRQF_SHARED, "aic79xx", ahd); if (!error) ahd->platform_data->irq = ahd->dev_softc->irq; diff --git a/drivers/scsi/aic7xxx/aic79xx_proc.c b/drivers/scsi/aic7xxx/aic79xx_proc.c index 24fd59a230b..c5f0ee59150 100644 --- a/drivers/scsi/aic7xxx/aic79xx_proc.c +++ b/drivers/scsi/aic7xxx/aic79xx_proc.c @@ -47,7 +47,7 @@ static int copy_info(struct info_str *info, char *fmt, ...); static void ahd_dump_target_state(struct ahd_softc *ahd, struct info_str *info, u_int our_id, char channel, - u_int target_id, u_int target_offset); + u_int target_id); static void ahd_dump_device_state(struct info_str *info, struct scsi_device *sdev); static int ahd_proc_write_seeprom(struct ahd_softc *ahd, @@ -204,10 +204,8 @@ ahd_format_transinfo(struct info_str *info, struct ahd_transinfo *tinfo) static void ahd_dump_target_state(struct ahd_softc *ahd, struct info_str *info, - u_int our_id, char channel, u_int target_id, - u_int target_offset) + u_int our_id, char channel, u_int target_id) { - struct ahd_linux_target *targ; struct scsi_target *starget; struct ahd_initiator_tinfo *tinfo; struct ahd_tmode_tstate *tstate; @@ -218,10 +216,9 @@ ahd_dump_target_state(struct ahd_softc *ahd, struct info_str *info, copy_info(info, "Target %d Negotiation Settings\n", target_id); copy_info(info, "\tUser: "); ahd_format_transinfo(info, &tinfo->user); - starget = ahd->platform_data->starget[target_offset]; + starget = ahd->platform_data->starget[target_id]; if (starget == NULL) return; - targ = scsi_transport_target_data(starget); copy_info(info, "\tGoal: "); ahd_format_transinfo(info, &tinfo->goal); @@ -231,7 +228,7 @@ ahd_dump_target_state(struct ahd_softc *ahd, struct info_str *info, for (lun = 0; lun < AHD_NUM_LUNS; lun++) { struct scsi_device *dev; - dev = targ->sdev[lun]; + dev = scsi_device_lookup_by_target(starget, lun); if (dev == NULL) continue; @@ -355,7 +352,7 @@ ahd_linux_proc_info(struct Scsi_Host *shost, char *buffer, char **start, copy_info(&info, "Allocated SCBs: %d, SG List Length: %d\n\n", ahd->scb_data.numscbs, AHD_NSEG); - max_targ = 15; + max_targ = 16; if (ahd->seep_config == NULL) copy_info(&info, "No Serial EEPROM\n"); @@ -373,12 +370,12 @@ ahd_linux_proc_info(struct Scsi_Host *shost, char *buffer, char **start, copy_info(&info, "\n"); if ((ahd->features & AHD_WIDE) == 0) - max_targ = 7; + max_targ = 8; - for (i = 0; i <= max_targ; i++) { + for (i = 0; i < max_targ; i++) { ahd_dump_target_state(ahd, &info, ahd->our_id, 'A', - /*target_id*/i, /*target_offset*/i); + /*target_id*/i); } retval = info.pos > info.offset ? info.pos - info.offset : 0; done: diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c index debf3e2a079..64c8b88a429 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm.c +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c @@ -341,7 +341,7 @@ MODULE_LICENSE("Dual BSD/GPL"); MODULE_VERSION(AIC7XXX_DRIVER_VERSION); module_param(aic7xxx, charp, 0444); MODULE_PARM_DESC(aic7xxx, -"period delimited, options string.\n" +"period-delimited options string:\n" " verbose Enable verbose/diagnostic logging\n" " allow_memio Allow device registers to be memory mapped\n" " debug Bitmask of debug values to enable\n" @@ -353,7 +353,6 @@ MODULE_PARM_DESC(aic7xxx, " periodically to prevent tag starvation.\n" " This may be required by some older disk\n" " drives or RAID arrays.\n" -" reverse_scan Sort PCI devices highest Bus/Slot to lowest\n" " tag_info:<tag_str> Set per-target tag depth\n" " global_tag_depth:<int> Global tag depth for every target\n" " on every bus\n" @@ -2540,15 +2539,28 @@ static void ahc_linux_set_iu(struct scsi_target *starget, int iu) static void ahc_linux_get_signalling(struct Scsi_Host *shost) { struct ahc_softc *ahc = *(struct ahc_softc **)shost->hostdata; - u8 mode = ahc_inb(ahc, SBLKCTL); + unsigned long flags; + u8 mode; - if (mode & ENAB40) - spi_signalling(shost) = SPI_SIGNAL_LVD; - else if (mode & ENAB20) + if (!(ahc->features & AHC_ULTRA2)) { + /* non-LVD chipset, may not have SBLKCTL reg */ spi_signalling(shost) = ahc->features & AHC_HVD ? SPI_SIGNAL_HVD : SPI_SIGNAL_SE; + return; + } + + ahc_lock(ahc, &flags); + ahc_pause(ahc); + mode = ahc_inb(ahc, SBLKCTL); + ahc_unpause(ahc); + ahc_unlock(ahc, &flags); + + if (mode & ENAB40) + spi_signalling(shost) = SPI_SIGNAL_LVD; + else if (mode & ENAB20) + spi_signalling(shost) = SPI_SIGNAL_SE; else spi_signalling(shost) = SPI_SIGNAL_UNKNOWN; } diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.h b/drivers/scsi/aic7xxx/aic7xxx_osm.h index a20b08c9ff1..d42a71ee076 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm.h +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.h @@ -59,7 +59,6 @@ #ifndef _AIC7XXX_LINUX_H_ #define _AIC7XXX_LINUX_H_ -#include <linux/config.h> #include <linux/types.h> #include <linux/blkdev.h> #include <linux/delay.h> diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c index 0c9c2f400bf..7e42f07a27f 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c +++ b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c @@ -375,7 +375,7 @@ ahc_pci_map_int(struct ahc_softc *ahc) int error; error = request_irq(ahc->dev_softc->irq, ahc_linux_isr, - SA_SHIRQ, "aic7xxx", ahc); + IRQF_SHARED, "aic7xxx", ahc); if (error == 0) ahc->platform_data->irq = ahc->dev_softc->irq; diff --git a/drivers/scsi/aic7xxx/aicasm/Makefile b/drivers/scsi/aic7xxx/aicasm/Makefile index 8c91fda6482..b98c5c1056c 100644 --- a/drivers/scsi/aic7xxx/aicasm/Makefile +++ b/drivers/scsi/aic7xxx/aicasm/Makefile @@ -14,6 +14,8 @@ LIBS= -ldb clean-files:= ${GENSRCS} ${GENHDRS} $(YSRCS:.y=.output) $(PROG) # Override default kernel CFLAGS. This is a userland app. AICASM_CFLAGS:= -I/usr/include -I. +LEX= flex +YACC= bison YFLAGS= -d NOMAN= noman diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c index 5dba1c63122..5dcef48d414 100644 --- a/drivers/scsi/aic7xxx_old.c +++ b/drivers/scsi/aic7xxx_old.c @@ -249,8 +249,6 @@ #include <linux/stat.h> #include <linux/slab.h> /* for kmalloc() */ -#include <linux/config.h> /* for CONFIG_PCI */ - #define AIC7XXX_C_VERSION "5.2.6" #define ALL_TARGETS -1 @@ -8322,11 +8320,11 @@ aic7xxx_register(struct scsi_host_template *template, struct aic7xxx_host *p, } else { - result = (request_irq(p->irq, do_aic7xxx_isr, SA_SHIRQ, + result = (request_irq(p->irq, do_aic7xxx_isr, IRQF_SHARED, "aic7xxx", p)); if (result < 0) { - result = (request_irq(p->irq, do_aic7xxx_isr, SA_INTERRUPT | SA_SHIRQ, + result = (request_irq(p->irq, do_aic7xxx_isr, IRQF_DISABLED | IRQF_SHARED, "aic7xxx", p)); } } @@ -9196,7 +9194,7 @@ aic7xxx_detect(struct scsi_host_template *template) for (i = 0; i < ARRAY_SIZE(aic_pdevs); i++) { pdev = NULL; - while ((pdev = pci_find_device(aic_pdevs[i].vendor_id, + while ((pdev = pci_get_device(aic_pdevs[i].vendor_id, aic_pdevs[i].device_id, pdev))) { if (pci_enable_device(pdev)) @@ -9653,6 +9651,9 @@ aic7xxx_detect(struct scsi_host_template *template) */ aic7xxx_configure_bugs(temp_p); + /* Hold a pci device reference */ + pci_dev_get(temp_p->pdev); + if ( list_p == NULL ) { list_p = current_p = temp_p; @@ -10989,8 +10990,10 @@ aic7xxx_release(struct Scsi_Host *host) if(!p->pdev) release_region(p->base, MAXREG - MINREG); #ifdef CONFIG_PCI - else + else { pci_release_regions(p->pdev); + pci_dev_put(p->pdev); + } #endif prev = NULL; next = first_aic7xxx; diff --git a/drivers/scsi/aic7xxx_old/aic7xxx_proc.c b/drivers/scsi/aic7xxx_old/aic7xxx_proc.c index 3bf334931a8..b07e4f04fd0 100644 --- a/drivers/scsi/aic7xxx_old/aic7xxx_proc.c +++ b/drivers/scsi/aic7xxx_old/aic7xxx_proc.c @@ -29,7 +29,6 @@ * $Id: aic7xxx_proc.c,v 4.1 1997/06/97 08:23:42 deang Exp $ *-M*************************************************************************/ -#include <linux/config.h> #define BLS (&aic7xxx_buffer[size]) #define HDRB \ diff --git a/drivers/scsi/aic94xx/Kconfig b/drivers/scsi/aic94xx/Kconfig new file mode 100644 index 00000000000..0ed391d8ee8 --- /dev/null +++ b/drivers/scsi/aic94xx/Kconfig @@ -0,0 +1,41 @@ +# +# Kernel configuration file for aic94xx SAS/SATA driver. +# +# Copyright (c) 2005 Adaptec, Inc. All rights reserved. +# Copyright (c) 2005 Luben Tuikov <luben_tuikov@adaptec.com> +# +# This file is licensed under GPLv2. +# +# This file is part of the aic94xx driver. +# +# The aic94xx driver is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; version 2 of the +# License. +# +# The aic94xx driver is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with Aic94xx Driver; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +# + +config SCSI_AIC94XX + tristate "Adaptec AIC94xx SAS/SATA support" + depends on PCI + select SCSI_SAS_LIBSAS + help + This driver supports Adaptec's SAS/SATA 3Gb/s 64 bit PCI-X + AIC94xx chip based host adapters. + +config AIC94XX_DEBUG + bool "Compile in debug mode" + default y + depends on SCSI_AIC94XX + help + Compiles the aic94xx driver in debug mode. In debug mode, + the driver prints some messages to the console. diff --git a/drivers/scsi/aic94xx/Makefile b/drivers/scsi/aic94xx/Makefile new file mode 100644 index 00000000000..e6b70123940 --- /dev/null +++ b/drivers/scsi/aic94xx/Makefile @@ -0,0 +1,39 @@ +# +# Makefile for Adaptec aic94xx SAS/SATA driver. +# +# Copyright (C) 2005 Adaptec, Inc. All rights reserved. +# Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> +# +# This file is licensed under GPLv2. +# +# This file is part of the the aic94xx driver. +# +# The aic94xx driver is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; version 2 of the +# License. +# +# The aic94xx driver is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with the aic94xx driver; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +ifeq ($(CONFIG_AIC94XX_DEBUG),y) + EXTRA_CFLAGS += -DASD_DEBUG -DASD_ENTER_EXIT +endif + +obj-$(CONFIG_SCSI_AIC94XX) += aic94xx.o +aic94xx-y += aic94xx_init.o \ + aic94xx_hwi.o \ + aic94xx_reg.o \ + aic94xx_sds.o \ + aic94xx_seq.o \ + aic94xx_dump.o \ + aic94xx_scb.o \ + aic94xx_dev.o \ + aic94xx_tmf.o \ + aic94xx_task.o diff --git a/drivers/scsi/aic94xx/aic94xx.h b/drivers/scsi/aic94xx/aic94xx.h new file mode 100644 index 00000000000..71a031df7a3 --- /dev/null +++ b/drivers/scsi/aic94xx/aic94xx.h @@ -0,0 +1,114 @@ +/* + * Aic94xx SAS/SATA driver header file. + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This file is part of the aic94xx driver. + * + * The aic94xx driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * The aic94xx driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the aic94xx driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * $Id: //depot/aic94xx/aic94xx.h#31 $ + */ + +#ifndef _AIC94XX_H_ +#define _AIC94XX_H_ + +#include <linux/slab.h> +#include <linux/ctype.h> +#include <scsi/libsas.h> + +#define ASD_DRIVER_NAME "aic94xx" +#define ASD_DRIVER_DESCRIPTION "Adaptec aic94xx SAS/SATA driver" + +#define asd_printk(fmt, ...) printk(KERN_NOTICE ASD_DRIVER_NAME ": " fmt, ## __VA_ARGS__) + +#ifdef ASD_ENTER_EXIT +#define ENTER printk(KERN_NOTICE "%s: ENTER %s\n", ASD_DRIVER_NAME, \ + __FUNCTION__) +#define EXIT printk(KERN_NOTICE "%s: --EXIT %s\n", ASD_DRIVER_NAME, \ + __FUNCTION__) +#else +#define ENTER +#define EXIT +#endif + +#ifdef ASD_DEBUG +#define ASD_DPRINTK asd_printk +#else +#define ASD_DPRINTK(fmt, ...) +#endif + +/* 2*ITNL timeout + 1 second */ +#define AIC94XX_SCB_TIMEOUT (5*HZ) + +extern kmem_cache_t *asd_dma_token_cache; +extern kmem_cache_t *asd_ascb_cache; +extern char sas_addr_str[2*SAS_ADDR_SIZE + 1]; + +static inline void asd_stringify_sas_addr(char *p, const u8 *sas_addr) +{ + int i; + for (i = 0; i < SAS_ADDR_SIZE; i++, p += 2) + snprintf(p, 3, "%02X", sas_addr[i]); + *p = '\0'; +} + +static inline void asd_destringify_sas_addr(u8 *sas_addr, const char *p) +{ + int i; + for (i = 0; i < SAS_ADDR_SIZE; i++) { + u8 h, l; + if (!*p) + break; + h = isdigit(*p) ? *p-'0' : *p-'A'+10; + p++; + l = isdigit(*p) ? *p-'0' : *p-'A'+10; + p++; + sas_addr[i] = (h<<4) | l; + } +} + +struct asd_ha_struct; +struct asd_ascb; + +int asd_read_ocm(struct asd_ha_struct *asd_ha); +int asd_read_flash(struct asd_ha_struct *asd_ha); + +int asd_dev_found(struct domain_device *dev); +void asd_dev_gone(struct domain_device *dev); + +void asd_invalidate_edb(struct asd_ascb *ascb, int edb_id); + +int asd_execute_task(struct sas_task *, int num, gfp_t gfp_flags); + +/* ---------- TMFs ---------- */ +int asd_abort_task(struct sas_task *); +int asd_abort_task_set(struct domain_device *, u8 *lun); +int asd_clear_aca(struct domain_device *, u8 *lun); +int asd_clear_task_set(struct domain_device *, u8 *lun); +int asd_lu_reset(struct domain_device *, u8 *lun); +int asd_query_task(struct sas_task *); + +/* ---------- Adapter and Port management ---------- */ +int asd_clear_nexus_port(struct asd_sas_port *port); +int asd_clear_nexus_ha(struct sas_ha_struct *sas_ha); + +/* ---------- Phy Management ---------- */ +int asd_control_phy(struct asd_sas_phy *phy, enum phy_func func, void *arg); + +#endif diff --git a/drivers/scsi/aic94xx/aic94xx_dev.c b/drivers/scsi/aic94xx/aic94xx_dev.c new file mode 100644 index 00000000000..6f8901b748f --- /dev/null +++ b/drivers/scsi/aic94xx/aic94xx_dev.c @@ -0,0 +1,353 @@ +/* + * Aic94xx SAS/SATA DDB management + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This file is part of the aic94xx driver. + * + * The aic94xx driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * The aic94xx driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the aic94xx driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * $Id: //depot/aic94xx/aic94xx_dev.c#21 $ + */ + +#include "aic94xx.h" +#include "aic94xx_hwi.h" +#include "aic94xx_reg.h" +#include "aic94xx_sas.h" + +#define FIND_FREE_DDB(_ha) find_first_zero_bit((_ha)->hw_prof.ddb_bitmap, \ + (_ha)->hw_prof.max_ddbs) +#define SET_DDB(_ddb, _ha) set_bit(_ddb, (_ha)->hw_prof.ddb_bitmap) +#define CLEAR_DDB(_ddb, _ha) clear_bit(_ddb, (_ha)->hw_prof.ddb_bitmap) + +static inline int asd_get_ddb(struct asd_ha_struct *asd_ha) +{ + unsigned long flags; + int ddb, i; + + spin_lock_irqsave(&asd_ha->hw_prof.ddb_lock, flags); + ddb = FIND_FREE_DDB(asd_ha); + if (ddb >= asd_ha->hw_prof.max_ddbs) { + ddb = -ENOMEM; + spin_unlock_irqrestore(&asd_ha->hw_prof.ddb_lock, flags); + goto out; + } + SET_DDB(ddb, asd_ha); + spin_unlock_irqrestore(&asd_ha->hw_prof.ddb_lock, flags); + + for (i = 0; i < sizeof(struct asd_ddb_ssp_smp_target_port); i+= 4) + asd_ddbsite_write_dword(asd_ha, ddb, i, 0); +out: + return ddb; +} + +#define INIT_CONN_TAG offsetof(struct asd_ddb_ssp_smp_target_port, init_conn_tag) +#define DEST_SAS_ADDR offsetof(struct asd_ddb_ssp_smp_target_port, dest_sas_addr) +#define SEND_QUEUE_HEAD offsetof(struct asd_ddb_ssp_smp_target_port, send_queue_head) +#define DDB_TYPE offsetof(struct asd_ddb_ssp_smp_target_port, ddb_type) +#define CONN_MASK offsetof(struct asd_ddb_ssp_smp_target_port, conn_mask) +#define DDB_TARG_FLAGS offsetof(struct asd_ddb_ssp_smp_target_port, flags) +#define DDB_TARG_FLAGS2 offsetof(struct asd_ddb_stp_sata_target_port, flags2) +#define EXEC_QUEUE_TAIL offsetof(struct asd_ddb_ssp_smp_target_port, exec_queue_tail) +#define SEND_QUEUE_TAIL offsetof(struct asd_ddb_ssp_smp_target_port, send_queue_tail) +#define SISTER_DDB offsetof(struct asd_ddb_ssp_smp_target_port, sister_ddb) +#define MAX_CCONN offsetof(struct asd_ddb_ssp_smp_target_port, max_concurrent_conn) +#define NUM_CTX offsetof(struct asd_ddb_ssp_smp_target_port, num_contexts) +#define ATA_CMD_SCBPTR offsetof(struct asd_ddb_stp_sata_target_port, ata_cmd_scbptr) +#define SATA_TAG_ALLOC_MASK offsetof(struct asd_ddb_stp_sata_target_port, sata_tag_alloc_mask) +#define NUM_SATA_TAGS offsetof(struct asd_ddb_stp_sata_target_port, num_sata_tags) +#define SATA_STATUS offsetof(struct asd_ddb_stp_sata_target_port, sata_status) +#define NCQ_DATA_SCB_PTR offsetof(struct asd_ddb_stp_sata_target_port, ncq_data_scb_ptr) +#define ITNL_TIMEOUT offsetof(struct asd_ddb_ssp_smp_target_port, itnl_timeout) + +static inline void asd_free_ddb(struct asd_ha_struct *asd_ha, int ddb) +{ + unsigned long flags; + + if (!ddb || ddb >= 0xFFFF) + return; + asd_ddbsite_write_byte(asd_ha, ddb, DDB_TYPE, DDB_TYPE_UNUSED); + spin_lock_irqsave(&asd_ha->hw_prof.ddb_lock, flags); + CLEAR_DDB(ddb, asd_ha); + spin_unlock_irqrestore(&asd_ha->hw_prof.ddb_lock, flags); +} + +static inline void asd_set_ddb_type(struct domain_device *dev) +{ + struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha; + int ddb = (int) (unsigned long) dev->lldd_dev; + + if (dev->dev_type == SATA_PM_PORT) + asd_ddbsite_write_byte(asd_ha,ddb, DDB_TYPE, DDB_TYPE_PM_PORT); + else if (dev->tproto) + asd_ddbsite_write_byte(asd_ha,ddb, DDB_TYPE, DDB_TYPE_TARGET); + else + asd_ddbsite_write_byte(asd_ha,ddb,DDB_TYPE,DDB_TYPE_INITIATOR); +} + +static int asd_init_sata_tag_ddb(struct domain_device *dev) +{ + struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha; + int ddb, i; + + ddb = asd_get_ddb(asd_ha); + if (ddb < 0) + return ddb; + + for (i = 0; i < sizeof(struct asd_ddb_sata_tag); i += 2) + asd_ddbsite_write_word(asd_ha, ddb, i, 0xFFFF); + + asd_ddbsite_write_word(asd_ha, (int) (unsigned long) dev->lldd_dev, + SISTER_DDB, ddb); + return 0; +} + +static inline int asd_init_sata(struct domain_device *dev) +{ + struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha; + int ddb = (int) (unsigned long) dev->lldd_dev; + u32 qdepth = 0; + int res = 0; + + asd_ddbsite_write_word(asd_ha, ddb, ATA_CMD_SCBPTR, 0xFFFF); + if ((dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM_PORT) && + dev->sata_dev.identify_device && + dev->sata_dev.identify_device[10] != 0) { + u16 w75 = le16_to_cpu(dev->sata_dev.identify_device[75]); + u16 w76 = le16_to_cpu(dev->sata_dev.identify_device[76]); + + if (w76 & 0x100) /* NCQ? */ + qdepth = (w75 & 0x1F) + 1; + asd_ddbsite_write_dword(asd_ha, ddb, SATA_TAG_ALLOC_MASK, + (1<<qdepth)-1); + asd_ddbsite_write_byte(asd_ha, ddb, NUM_SATA_TAGS, qdepth); + } + if (dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM || + dev->dev_type == SATA_PM_PORT) { + struct dev_to_host_fis *fis = (struct dev_to_host_fis *) + dev->frame_rcvd; + asd_ddbsite_write_byte(asd_ha, ddb, SATA_STATUS, fis->status); + } + asd_ddbsite_write_word(asd_ha, ddb, NCQ_DATA_SCB_PTR, 0xFFFF); + if (qdepth > 0) + res = asd_init_sata_tag_ddb(dev); + return res; +} + +static int asd_init_target_ddb(struct domain_device *dev) +{ + int ddb, i; + struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha; + u8 flags = 0; + + ddb = asd_get_ddb(asd_ha); + if (ddb < 0) + return ddb; + + dev->lldd_dev = (void *) (unsigned long) ddb; + + asd_ddbsite_write_byte(asd_ha, ddb, 0, DDB_TP_CONN_TYPE); + asd_ddbsite_write_byte(asd_ha, ddb, 1, 0); + asd_ddbsite_write_word(asd_ha, ddb, INIT_CONN_TAG, 0xFFFF); + for (i = 0; i < SAS_ADDR_SIZE; i++) + asd_ddbsite_write_byte(asd_ha, ddb, DEST_SAS_ADDR+i, + dev->sas_addr[i]); + asd_ddbsite_write_word(asd_ha, ddb, SEND_QUEUE_HEAD, 0xFFFF); + asd_set_ddb_type(dev); + asd_ddbsite_write_byte(asd_ha, ddb, CONN_MASK, dev->port->phy_mask); + if (dev->port->oob_mode != SATA_OOB_MODE) { + flags |= OPEN_REQUIRED; + if ((dev->dev_type == SATA_DEV) || + (dev->tproto & SAS_PROTO_STP)) { + struct smp_resp *rps_resp = &dev->sata_dev.rps_resp; + if (rps_resp->frame_type == SMP_RESPONSE && + rps_resp->function == SMP_REPORT_PHY_SATA && + rps_resp->result == SMP_RESP_FUNC_ACC) { + if (rps_resp->rps.affil_valid) + flags |= STP_AFFIL_POL; + if (rps_resp->rps.affil_supp) + flags |= SUPPORTS_AFFIL; + } + } else { + flags |= CONCURRENT_CONN_SUPP; + if (!dev->parent && + (dev->dev_type == EDGE_DEV || + dev->dev_type == FANOUT_DEV)) + asd_ddbsite_write_byte(asd_ha, ddb, MAX_CCONN, + 4); + else + asd_ddbsite_write_byte(asd_ha, ddb, MAX_CCONN, + dev->pathways); + asd_ddbsite_write_byte(asd_ha, ddb, NUM_CTX, 1); + } + } + if (dev->dev_type == SATA_PM) + flags |= SATA_MULTIPORT; + asd_ddbsite_write_byte(asd_ha, ddb, DDB_TARG_FLAGS, flags); + + flags = 0; + if (dev->tproto & SAS_PROTO_STP) + flags |= STP_CL_POL_NO_TX; + asd_ddbsite_write_byte(asd_ha, ddb, DDB_TARG_FLAGS2, flags); + + asd_ddbsite_write_word(asd_ha, ddb, EXEC_QUEUE_TAIL, 0xFFFF); + asd_ddbsite_write_word(asd_ha, ddb, SEND_QUEUE_TAIL, 0xFFFF); + asd_ddbsite_write_word(asd_ha, ddb, SISTER_DDB, 0xFFFF); + + if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTO_STP)) { + i = asd_init_sata(dev); + if (i < 0) { + asd_free_ddb(asd_ha, ddb); + return i; + } + } + + if (dev->dev_type == SAS_END_DEV) { + struct sas_end_device *rdev = rphy_to_end_device(dev->rphy); + if (rdev->I_T_nexus_loss_timeout > 0) + asd_ddbsite_write_word(asd_ha, ddb, ITNL_TIMEOUT, + min(rdev->I_T_nexus_loss_timeout, + (u16)ITNL_TIMEOUT_CONST)); + else + asd_ddbsite_write_word(asd_ha, ddb, ITNL_TIMEOUT, + (u16)ITNL_TIMEOUT_CONST); + } + return 0; +} + +static int asd_init_sata_pm_table_ddb(struct domain_device *dev) +{ + struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha; + int ddb, i; + + ddb = asd_get_ddb(asd_ha); + if (ddb < 0) + return ddb; + + for (i = 0; i < 32; i += 2) + asd_ddbsite_write_word(asd_ha, ddb, i, 0xFFFF); + + asd_ddbsite_write_word(asd_ha, (int) (unsigned long) dev->lldd_dev, + SISTER_DDB, ddb); + + return 0; +} + +#define PM_PORT_FLAGS offsetof(struct asd_ddb_sata_pm_port, pm_port_flags) +#define PARENT_DDB offsetof(struct asd_ddb_sata_pm_port, parent_ddb) + +/** + * asd_init_sata_pm_port_ddb -- SATA Port Multiplier Port + * dev: pointer to domain device + * + * For SATA Port Multiplier Ports we need to allocate one SATA Port + * Multiplier Port DDB and depending on whether the target on it + * supports SATA II NCQ, one SATA Tag DDB. + */ +static int asd_init_sata_pm_port_ddb(struct domain_device *dev) +{ + int ddb, i, parent_ddb, pmtable_ddb; + struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha; + u8 flags; + + ddb = asd_get_ddb(asd_ha); + if (ddb < 0) + return ddb; + + asd_set_ddb_type(dev); + flags = (dev->sata_dev.port_no << 4) | PM_PORT_SET; + asd_ddbsite_write_byte(asd_ha, ddb, PM_PORT_FLAGS, flags); + asd_ddbsite_write_word(asd_ha, ddb, SISTER_DDB, 0xFFFF); + asd_ddbsite_write_word(asd_ha, ddb, ATA_CMD_SCBPTR, 0xFFFF); + asd_init_sata(dev); + + parent_ddb = (int) (unsigned long) dev->parent->lldd_dev; + asd_ddbsite_write_word(asd_ha, ddb, PARENT_DDB, parent_ddb); + pmtable_ddb = asd_ddbsite_read_word(asd_ha, parent_ddb, SISTER_DDB); + asd_ddbsite_write_word(asd_ha, pmtable_ddb, dev->sata_dev.port_no,ddb); + + if (asd_ddbsite_read_byte(asd_ha, ddb, NUM_SATA_TAGS) > 0) { + i = asd_init_sata_tag_ddb(dev); + if (i < 0) { + asd_free_ddb(asd_ha, ddb); + return i; + } + } + return 0; +} + +static int asd_init_initiator_ddb(struct domain_device *dev) +{ + return -ENODEV; +} + +/** + * asd_init_sata_pm_ddb -- SATA Port Multiplier + * dev: pointer to domain device + * + * For STP and direct-attached SATA Port Multipliers we need + * one target port DDB entry and one SATA PM table DDB entry. + */ +static int asd_init_sata_pm_ddb(struct domain_device *dev) +{ + int res = 0; + + res = asd_init_target_ddb(dev); + if (res) + goto out; + res = asd_init_sata_pm_table_ddb(dev); + if (res) + asd_free_ddb(dev->port->ha->lldd_ha, + (int) (unsigned long) dev->lldd_dev); +out: + return res; +} + +int asd_dev_found(struct domain_device *dev) +{ + int res = 0; + + switch (dev->dev_type) { + case SATA_PM: + res = asd_init_sata_pm_ddb(dev); + break; + case SATA_PM_PORT: + res = asd_init_sata_pm_port_ddb(dev); + break; + default: + if (dev->tproto) + res = asd_init_target_ddb(dev); + else + res = asd_init_initiator_ddb(dev); + } + return res; +} + +void asd_dev_gone(struct domain_device *dev) +{ + int ddb, sister_ddb; + struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha; + + ddb = (int) (unsigned long) dev->lldd_dev; + sister_ddb = asd_ddbsite_read_word(asd_ha, ddb, SISTER_DDB); + + if (sister_ddb != 0xFFFF) + asd_free_ddb(asd_ha, sister_ddb); + asd_free_ddb(asd_ha, ddb); + dev->lldd_dev = NULL; +} diff --git a/drivers/scsi/aic94xx/aic94xx_dump.c b/drivers/scsi/aic94xx/aic94xx_dump.c new file mode 100644 index 00000000000..e6ade5996d9 --- /dev/null +++ b/drivers/scsi/aic94xx/aic94xx_dump.c @@ -0,0 +1,959 @@ +/* + * Aic94xx SAS/SATA driver dump interface. + * + * Copyright (C) 2004 Adaptec, Inc. All rights reserved. + * Copyright (C) 2004 David Chaw <david_chaw@adaptec.com> + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This file is part of the aic94xx driver. + * + * The aic94xx driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * The aic94xx driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the aic94xx driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * 2005/07/14/LT Complete overhaul of this file. Update pages, register + * locations, names, etc. Make use of macros. Print more information. + * Print all cseq and lseq mip and mdp. + * + */ + +#include "linux/pci.h" +#include "aic94xx.h" +#include "aic94xx_reg.h" +#include "aic94xx_reg_def.h" +#include "aic94xx_sas.h" + +#include "aic94xx_dump.h" + +#ifdef ASD_DEBUG + +#define MD(x) (1 << (x)) +#define MODE_COMMON (1 << 31) +#define MODE_0_7 (0xFF) + +static const struct lseq_cio_regs { + char *name; + u32 offs; + u8 width; + u32 mode; +} LSEQmCIOREGS[] = { + {"LmMnSCBPTR", 0x20, 16, MD(0)|MD(1)|MD(2)|MD(3)|MD(4) }, + {"LmMnDDBPTR", 0x22, 16, MD(0)|MD(1)|MD(2)|MD(3)|MD(4) }, + {"LmREQMBX", 0x30, 32, MODE_COMMON }, + {"LmRSPMBX", 0x34, 32, MODE_COMMON }, + {"LmMnINT", 0x38, 32, MODE_0_7 }, + {"LmMnINTEN", 0x3C, 32, MODE_0_7 }, + {"LmXMTPRIMD", 0x40, 32, MODE_COMMON }, + {"LmXMTPRIMCS", 0x44, 8, MODE_COMMON }, + {"LmCONSTAT", 0x45, 8, MODE_COMMON }, + {"LmMnDMAERRS", 0x46, 8, MD(0)|MD(1) }, + {"LmMnSGDMAERRS", 0x47, 8, MD(0)|MD(1) }, + {"LmMnEXPHDRP", 0x48, 8, MD(0) }, + {"LmMnSASAALIGN", 0x48, 8, MD(1) }, + {"LmMnMSKHDRP", 0x49, 8, MD(0) }, + {"LmMnSTPALIGN", 0x49, 8, MD(1) }, + {"LmMnRCVHDRP", 0x4A, 8, MD(0) }, + {"LmMnXMTHDRP", 0x4A, 8, MD(1) }, + {"LmALIGNMODE", 0x4B, 8, MD(1) }, + {"LmMnEXPRCVCNT", 0x4C, 32, MD(0) }, + {"LmMnXMTCNT", 0x4C, 32, MD(1) }, + {"LmMnCURRTAG", 0x54, 16, MD(0) }, + {"LmMnPREVTAG", 0x56, 16, MD(0) }, + {"LmMnACKOFS", 0x58, 8, MD(1) }, + {"LmMnXFRLVL", 0x59, 8, MD(0)|MD(1) }, + {"LmMnSGDMACTL", 0x5A, 8, MD(0)|MD(1) }, + {"LmMnSGDMASTAT", 0x5B, 8, MD(0)|MD(1) }, + {"LmMnDDMACTL", 0x5C, 8, MD(0)|MD(1) }, + {"LmMnDDMASTAT", 0x5D, 8, MD(0)|MD(1) }, + {"LmMnDDMAMODE", 0x5E, 16, MD(0)|MD(1) }, + {"LmMnPIPECTL", 0x61, 8, MD(0)|MD(1) }, + {"LmMnACTSCB", 0x62, 16, MD(0)|MD(1) }, + {"LmMnSGBHADR", 0x64, 8, MD(0)|MD(1) }, + {"LmMnSGBADR", 0x65, 8, MD(0)|MD(1) }, + {"LmMnSGDCNT", 0x66, 8, MD(0)|MD(1) }, + {"LmMnSGDMADR", 0x68, 32, MD(0)|MD(1) }, + {"LmMnSGDMADR", 0x6C, 32, MD(0)|MD(1) }, + {"LmMnXFRCNT", 0x70, 32, MD(0)|MD(1) }, + {"LmMnXMTCRC", 0x74, 32, MD(1) }, + {"LmCURRTAG", 0x74, 16, MD(0) }, + {"LmPREVTAG", 0x76, 16, MD(0) }, + {"LmMnDPSEL", 0x7B, 8, MD(0)|MD(1) }, + {"LmDPTHSTAT", 0x7C, 8, MODE_COMMON }, + {"LmMnHOLDLVL", 0x7D, 8, MD(0) }, + {"LmMnSATAFS", 0x7E, 8, MD(1) }, + {"LmMnCMPLTSTAT", 0x7F, 8, MD(0)|MD(1) }, + {"LmPRMSTAT0", 0x80, 32, MODE_COMMON }, + {"LmPRMSTAT1", 0x84, 32, MODE_COMMON }, + {"LmGPRMINT", 0x88, 8, MODE_COMMON }, + {"LmMnCURRSCB", 0x8A, 16, MD(0) }, + {"LmPRMICODE", 0x8C, 32, MODE_COMMON }, + {"LmMnRCVCNT", 0x90, 16, MD(0) }, + {"LmMnBUFSTAT", 0x92, 16, MD(0) }, + {"LmMnXMTHDRSIZE",0x92, 8, MD(1) }, + {"LmMnXMTSIZE", 0x93, 8, MD(1) }, + {"LmMnTGTXFRCNT", 0x94, 32, MD(0) }, + {"LmMnEXPROFS", 0x98, 32, MD(0) }, + {"LmMnXMTROFS", 0x98, 32, MD(1) }, + {"LmMnRCVROFS", 0x9C, 32, MD(0) }, + {"LmCONCTL", 0xA0, 16, MODE_COMMON }, + {"LmBITLTIMER", 0xA2, 16, MODE_COMMON }, + {"LmWWNLOW", 0xA8, 32, MODE_COMMON }, + {"LmWWNHIGH", 0xAC, 32, MODE_COMMON }, + {"LmMnFRMERR", 0xB0, 32, MD(0) }, + {"LmMnFRMERREN", 0xB4, 32, MD(0) }, + {"LmAWTIMER", 0xB8, 16, MODE_COMMON }, + {"LmAWTCTL", 0xBA, 8, MODE_COMMON }, + {"LmMnHDRCMPS", 0xC0, 32, MD(0) }, + {"LmMnXMTSTAT", 0xC4, 8, MD(1) }, + {"LmHWTSTATEN", 0xC5, 8, MODE_COMMON }, + {"LmMnRRDYRC", 0xC6, 8, MD(0) }, + {"LmMnRRDYTC", 0xC6, 8, MD(1) }, + {"LmHWTSTAT", 0xC7, 8, MODE_COMMON }, + {"LmMnDATABUFADR",0xC8, 16, MD(0)|MD(1) }, + {"LmDWSSTATUS", 0xCB, 8, MODE_COMMON }, + {"LmMnACTSTAT", 0xCE, 16, MD(0)|MD(1) }, + {"LmMnREQSCB", 0xD2, 16, MD(0)|MD(1) }, + {"LmXXXPRIM", 0xD4, 32, MODE_COMMON }, + {"LmRCVASTAT", 0xD9, 8, MODE_COMMON }, + {"LmINTDIS1", 0xDA, 8, MODE_COMMON }, + {"LmPSTORESEL", 0xDB, 8, MODE_COMMON }, + {"LmPSTORE", 0xDC, 32, MODE_COMMON }, + {"LmPRIMSTAT0EN", 0xE0, 32, MODE_COMMON }, + {"LmPRIMSTAT1EN", 0xE4, 32, MODE_COMMON }, + {"LmDONETCTL", 0xF2, 16, MODE_COMMON }, + {NULL, 0, 0, 0 } +}; +/* +static struct lseq_cio_regs LSEQmOOBREGS[] = { + {"OOB_BFLTR" ,0x100, 8, MD(5)}, + {"OOB_INIT_MIN" ,0x102,16, MD(5)}, + {"OOB_INIT_MAX" ,0x104,16, MD(5)}, + {"OOB_INIT_NEG" ,0x106,16, MD(5)}, + {"OOB_SAS_MIN" ,0x108,16, MD(5)}, + {"OOB_SAS_MAX" ,0x10A,16, MD(5)}, + {"OOB_SAS_NEG" ,0x10C,16, MD(5)}, + {"OOB_WAKE_MIN" ,0x10E,16, MD(5)}, + {"OOB_WAKE_MAX" ,0x110,16, MD(5)}, + {"OOB_WAKE_NEG" ,0x112,16, MD(5)}, + {"OOB_IDLE_MAX" ,0x114,16, MD(5)}, + {"OOB_BURST_MAX" ,0x116,16, MD(5)}, + {"OOB_XMIT_BURST" ,0x118, 8, MD(5)}, + {"OOB_SEND_PAIRS" ,0x119, 8, MD(5)}, + {"OOB_INIT_IDLE" ,0x11A, 8, MD(5)}, + {"OOB_INIT_NEGO" ,0x11C, 8, MD(5)}, + {"OOB_SAS_IDLE" ,0x11E, 8, MD(5)}, + {"OOB_SAS_NEGO" ,0x120, 8, MD(5)}, + {"OOB_WAKE_IDLE" ,0x122, 8, MD(5)}, + {"OOB_WAKE_NEGO" ,0x124, 8, MD(5)}, + {"OOB_DATA_KBITS" ,0x126, 8, MD(5)}, + {"OOB_BURST_DATA" ,0x128,32, MD(5)}, + {"OOB_ALIGN_0_DATA" ,0x12C,32, MD(5)}, + {"OOB_ALIGN_1_DATA" ,0x130,32, MD(5)}, + {"OOB_SYNC_DATA" ,0x134,32, MD(5)}, + {"OOB_D10_2_DATA" ,0x138,32, MD(5)}, + {"OOB_PHY_RST_CNT" ,0x13C,32, MD(5)}, + {"OOB_SIG_GEN" ,0x140, 8, MD(5)}, + {"OOB_XMIT" ,0x141, 8, MD(5)}, + {"FUNCTION_MAKS" ,0x142, 8, MD(5)}, + {"OOB_MODE" ,0x143, 8, MD(5)}, + {"CURRENT_STATUS" ,0x144, 8, MD(5)}, + {"SPEED_MASK" ,0x145, 8, MD(5)}, + {"PRIM_COUNT" ,0x146, 8, MD(5)}, + {"OOB_SIGNALS" ,0x148, 8, MD(5)}, + {"OOB_DATA_DET" ,0x149, 8, MD(5)}, + {"OOB_TIME_OUT" ,0x14C, 8, MD(5)}, + {"OOB_TIMER_ENABLE" ,0x14D, 8, MD(5)}, + {"OOB_STATUS" ,0x14E, 8, MD(5)}, + {"HOT_PLUG_DELAY" ,0x150, 8, MD(5)}, + {"RCD_DELAY" ,0x151, 8, MD(5)}, + {"COMSAS_TIMER" ,0x152, 8, MD(5)}, + {"SNTT_DELAY" ,0x153, 8, MD(5)}, + {"SPD_CHNG_DELAY" ,0x154, 8, MD(5)}, + {"SNLT_DELAY" ,0x155, 8, MD(5)}, + {"SNWT_DELAY" ,0x156, 8, MD(5)}, + {"ALIGN_DELAY" ,0x157, 8, MD(5)}, + {"INT_ENABLE_0" ,0x158, 8, MD(5)}, + {"INT_ENABLE_1" ,0x159, 8, MD(5)}, + {"INT_ENABLE_2" ,0x15A, 8, MD(5)}, + {"INT_ENABLE_3" ,0x15B, 8, MD(5)}, + {"OOB_TEST_REG" ,0x15C, 8, MD(5)}, + {"PHY_CONTROL_0" ,0x160, 8, MD(5)}, + {"PHY_CONTROL_1" ,0x161, 8, MD(5)}, + {"PHY_CONTROL_2" ,0x162, 8, MD(5)}, + {"PHY_CONTROL_3" ,0x163, 8, MD(5)}, + {"PHY_OOB_CAL_TX" ,0x164, 8, MD(5)}, + {"PHY_OOB_CAL_RX" ,0x165, 8, MD(5)}, + {"OOB_PHY_CAL_TX" ,0x166, 8, MD(5)}, + {"OOB_PHY_CAL_RX" ,0x167, 8, MD(5)}, + {"PHY_CONTROL_4" ,0x168, 8, MD(5)}, + {"PHY_TEST" ,0x169, 8, MD(5)}, + {"PHY_PWR_CTL" ,0x16A, 8, MD(5)}, + {"PHY_PWR_DELAY" ,0x16B, 8, MD(5)}, + {"OOB_SM_CON" ,0x16C, 8, MD(5)}, + {"ADDR_TRAP_1" ,0x16D, 8, MD(5)}, + {"ADDR_NEXT_1" ,0x16E, 8, MD(5)}, + {"NEXT_ST_1" ,0x16F, 8, MD(5)}, + {"OOB_SM_STATE" ,0x170, 8, MD(5)}, + {"ADDR_TRAP_2" ,0x171, 8, MD(5)}, + {"ADDR_NEXT_2" ,0x172, 8, MD(5)}, + {"NEXT_ST_2" ,0x173, 8, MD(5)}, + {NULL, 0, 0, 0 } +}; +*/ +#define STR_8BIT " %30s[0x%04x]:0x%02x\n" +#define STR_16BIT " %30s[0x%04x]:0x%04x\n" +#define STR_32BIT " %30s[0x%04x]:0x%08x\n" +#define STR_64BIT " %30s[0x%04x]:0x%llx\n" + +#define PRINT_REG_8bit(_ha, _n, _r) asd_printk(STR_8BIT, #_n, _n, \ + asd_read_reg_byte(_ha, _r)) +#define PRINT_REG_16bit(_ha, _n, _r) asd_printk(STR_16BIT, #_n, _n, \ + asd_read_reg_word(_ha, _r)) +#define PRINT_REG_32bit(_ha, _n, _r) asd_printk(STR_32BIT, #_n, _n, \ + asd_read_reg_dword(_ha, _r)) + +#define PRINT_CREG_8bit(_ha, _n) asd_printk(STR_8BIT, #_n, _n, \ + asd_read_reg_byte(_ha, C##_n)) +#define PRINT_CREG_16bit(_ha, _n) asd_printk(STR_16BIT, #_n, _n, \ + asd_read_reg_word(_ha, C##_n)) +#define PRINT_CREG_32bit(_ha, _n) asd_printk(STR_32BIT, #_n, _n, \ + asd_read_reg_dword(_ha, C##_n)) + +#define MSTR_8BIT " Mode:%02d %30s[0x%04x]:0x%02x\n" +#define MSTR_16BIT " Mode:%02d %30s[0x%04x]:0x%04x\n" +#define MSTR_32BIT " Mode:%02d %30s[0x%04x]:0x%08x\n" + +#define PRINT_MREG_8bit(_ha, _m, _n, _r) asd_printk(MSTR_8BIT, _m, #_n, _n, \ + asd_read_reg_byte(_ha, _r)) +#define PRINT_MREG_16bit(_ha, _m, _n, _r) asd_printk(MSTR_16BIT, _m, #_n, _n, \ + asd_read_reg_word(_ha, _r)) +#define PRINT_MREG_32bit(_ha, _m, _n, _r) asd_printk(MSTR_32BIT, _m, #_n, _n, \ + asd_read_reg_dword(_ha, _r)) + +/* can also be used for MD when the register is mode aware already */ +#define PRINT_MIS_byte(_ha, _n) asd_printk(STR_8BIT, #_n,CSEQ_##_n-CMAPPEDSCR,\ + asd_read_reg_byte(_ha, CSEQ_##_n)) +#define PRINT_MIS_word(_ha, _n) asd_printk(STR_16BIT,#_n,CSEQ_##_n-CMAPPEDSCR,\ + asd_read_reg_word(_ha, CSEQ_##_n)) +#define PRINT_MIS_dword(_ha, _n) \ + asd_printk(STR_32BIT,#_n,CSEQ_##_n-CMAPPEDSCR,\ + asd_read_reg_dword(_ha, CSEQ_##_n)) +#define PRINT_MIS_qword(_ha, _n) \ + asd_printk(STR_64BIT, #_n,CSEQ_##_n-CMAPPEDSCR, \ + (unsigned long long)(((u64)asd_read_reg_dword(_ha, CSEQ_##_n)) \ + | (((u64)asd_read_reg_dword(_ha, (CSEQ_##_n)+4))<<32))) + +#define CMDP_REG(_n, _m) (_m*(CSEQ_PAGE_SIZE*2)+CSEQ_##_n) +#define PRINT_CMDP_word(_ha, _n) \ +asd_printk("%20s 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x\n", \ + #_n, \ + asd_read_reg_word(_ha, CMDP_REG(_n, 0)), \ + asd_read_reg_word(_ha, CMDP_REG(_n, 1)), \ + asd_read_reg_word(_ha, CMDP_REG(_n, 2)), \ + asd_read_reg_word(_ha, CMDP_REG(_n, 3)), \ + asd_read_reg_word(_ha, CMDP_REG(_n, 4)), \ + asd_read_reg_word(_ha, CMDP_REG(_n, 5)), \ + asd_read_reg_word(_ha, CMDP_REG(_n, 6)), \ + asd_read_reg_word(_ha, CMDP_REG(_n, 7))) + +#define PRINT_CMDP_byte(_ha, _n) \ +asd_printk("%20s 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x 0x%04x\n", \ + #_n, \ + asd_read_reg_byte(_ha, CMDP_REG(_n, 0)), \ + asd_read_reg_byte(_ha, CMDP_REG(_n, 1)), \ + asd_read_reg_byte(_ha, CMDP_REG(_n, 2)), \ + asd_read_reg_byte(_ha, CMDP_REG(_n, 3)), \ + asd_read_reg_byte(_ha, CMDP_REG(_n, 4)), \ + asd_read_reg_byte(_ha, CMDP_REG(_n, 5)), \ + asd_read_reg_byte(_ha, CMDP_REG(_n, 6)), \ + asd_read_reg_byte(_ha, CMDP_REG(_n, 7))) + +static void asd_dump_cseq_state(struct asd_ha_struct *asd_ha) +{ + int mode; + + asd_printk("CSEQ STATE\n"); + + asd_printk("ARP2 REGISTERS\n"); + + PRINT_CREG_32bit(asd_ha, ARP2CTL); + PRINT_CREG_32bit(asd_ha, ARP2INT); + PRINT_CREG_32bit(asd_ha, ARP2INTEN); + PRINT_CREG_8bit(asd_ha, MODEPTR); + PRINT_CREG_8bit(asd_ha, ALTMODE); + PRINT_CREG_8bit(asd_ha, FLAG); + PRINT_CREG_8bit(asd_ha, ARP2INTCTL); + PRINT_CREG_16bit(asd_ha, STACK); + PRINT_CREG_16bit(asd_ha, PRGMCNT); + PRINT_CREG_16bit(asd_ha, ACCUM); + PRINT_CREG_16bit(asd_ha, SINDEX); + PRINT_CREG_16bit(asd_ha, DINDEX); + PRINT_CREG_8bit(asd_ha, SINDIR); + PRINT_CREG_8bit(asd_ha, DINDIR); + PRINT_CREG_8bit(asd_ha, JUMLDIR); + PRINT_CREG_8bit(asd_ha, ARP2HALTCODE); + PRINT_CREG_16bit(asd_ha, CURRADDR); + PRINT_CREG_16bit(asd_ha, LASTADDR); + PRINT_CREG_16bit(asd_ha, NXTLADDR); + + asd_printk("IOP REGISTERS\n"); + + PRINT_REG_32bit(asd_ha, BISTCTL1, CBISTCTL); + PRINT_CREG_32bit(asd_ha, MAPPEDSCR); + + asd_printk("CIO REGISTERS\n"); + + for (mode = 0; mode < 9; mode++) + PRINT_MREG_16bit(asd_ha, mode, MnSCBPTR, CMnSCBPTR(mode)); + PRINT_MREG_16bit(asd_ha, 15, MnSCBPTR, CMnSCBPTR(15)); + + for (mode = 0; mode < 9; mode++) + PRINT_MREG_16bit(asd_ha, mode, MnDDBPTR, CMnDDBPTR(mode)); + PRINT_MREG_16bit(asd_ha, 15, MnDDBPTR, CMnDDBPTR(15)); + + for (mode = 0; mode < 8; mode++) + PRINT_MREG_32bit(asd_ha, mode, MnREQMBX, CMnREQMBX(mode)); + for (mode = 0; mode < 8; mode++) + PRINT_MREG_32bit(asd_ha, mode, MnRSPMBX, CMnRSPMBX(mode)); + for (mode = 0; mode < 8; mode++) + PRINT_MREG_32bit(asd_ha, mode, MnINT, CMnINT(mode)); + for (mode = 0; mode < 8; mode++) + PRINT_MREG_32bit(asd_ha, mode, MnINTEN, CMnINTEN(mode)); + + PRINT_CREG_8bit(asd_ha, SCRATCHPAGE); + for (mode = 0; mode < 8; mode++) + PRINT_MREG_8bit(asd_ha, mode, MnSCRATCHPAGE, + CMnSCRATCHPAGE(mode)); + + PRINT_REG_32bit(asd_ha, CLINKCON, CLINKCON); + PRINT_REG_8bit(asd_ha, CCONMSK, CCONMSK); + PRINT_REG_8bit(asd_ha, CCONEXIST, CCONEXIST); + PRINT_REG_16bit(asd_ha, CCONMODE, CCONMODE); + PRINT_REG_32bit(asd_ha, CTIMERCALC, CTIMERCALC); + PRINT_REG_8bit(asd_ha, CINTDIS, CINTDIS); + + asd_printk("SCRATCH MEMORY\n"); + + asd_printk("MIP 4 >>>>>\n"); + PRINT_MIS_word(asd_ha, Q_EXE_HEAD); + PRINT_MIS_word(asd_ha, Q_EXE_TAIL); + PRINT_MIS_word(asd_ha, Q_DONE_HEAD); + PRINT_MIS_word(asd_ha, Q_DONE_TAIL); + PRINT_MIS_word(asd_ha, Q_SEND_HEAD); + PRINT_MIS_word(asd_ha, Q_SEND_TAIL); + PRINT_MIS_word(asd_ha, Q_DMA2CHIM_HEAD); + PRINT_MIS_word(asd_ha, Q_DMA2CHIM_TAIL); + PRINT_MIS_word(asd_ha, Q_COPY_HEAD); + PRINT_MIS_word(asd_ha, Q_COPY_TAIL); + PRINT_MIS_word(asd_ha, REG0); + PRINT_MIS_word(asd_ha, REG1); + PRINT_MIS_dword(asd_ha, REG2); + PRINT_MIS_byte(asd_ha, LINK_CTL_Q_MAP); + PRINT_MIS_byte(asd_ha, MAX_CSEQ_MODE); + PRINT_MIS_byte(asd_ha, FREE_LIST_HACK_COUNT); + + asd_printk("MIP 5 >>>>\n"); + PRINT_MIS_qword(asd_ha, EST_NEXUS_REQ_QUEUE); + PRINT_MIS_qword(asd_ha, EST_NEXUS_REQ_COUNT); + PRINT_MIS_word(asd_ha, Q_EST_NEXUS_HEAD); + PRINT_MIS_word(asd_ha, Q_EST_NEXUS_TAIL); + PRINT_MIS_word(asd_ha, NEED_EST_NEXUS_SCB); + PRINT_MIS_byte(asd_ha, EST_NEXUS_REQ_HEAD); + PRINT_MIS_byte(asd_ha, EST_NEXUS_REQ_TAIL); + PRINT_MIS_byte(asd_ha, EST_NEXUS_SCB_OFFSET); + + asd_printk("MIP 6 >>>>\n"); + PRINT_MIS_word(asd_ha, INT_ROUT_RET_ADDR0); + PRINT_MIS_word(asd_ha, INT_ROUT_RET_ADDR1); + PRINT_MIS_word(asd_ha, INT_ROUT_SCBPTR); + PRINT_MIS_byte(asd_ha, INT_ROUT_MODE); + PRINT_MIS_byte(asd_ha, ISR_SCRATCH_FLAGS); + PRINT_MIS_word(asd_ha, ISR_SAVE_SINDEX); + PRINT_MIS_word(asd_ha, ISR_SAVE_DINDEX); + PRINT_MIS_word(asd_ha, Q_MONIRTT_HEAD); + PRINT_MIS_word(asd_ha, Q_MONIRTT_TAIL); + PRINT_MIS_byte(asd_ha, FREE_SCB_MASK); + PRINT_MIS_word(asd_ha, BUILTIN_FREE_SCB_HEAD); + PRINT_MIS_word(asd_ha, BUILTIN_FREE_SCB_TAIL); + PRINT_MIS_word(asd_ha, EXTENDED_FREE_SCB_HEAD); + PRINT_MIS_word(asd_ha, EXTENDED_FREE_SCB_TAIL); + + asd_printk("MIP 7 >>>>\n"); + PRINT_MIS_qword(asd_ha, EMPTY_REQ_QUEUE); + PRINT_MIS_qword(asd_ha, EMPTY_REQ_COUNT); + PRINT_MIS_word(asd_ha, Q_EMPTY_HEAD); + PRINT_MIS_word(asd_ha, Q_EMPTY_TAIL); + PRINT_MIS_word(asd_ha, NEED_EMPTY_SCB); + PRINT_MIS_byte(asd_ha, EMPTY_REQ_HEAD); + PRINT_MIS_byte(asd_ha, EMPTY_REQ_TAIL); + PRINT_MIS_byte(asd_ha, EMPTY_SCB_OFFSET); + PRINT_MIS_word(asd_ha, PRIMITIVE_DATA); + PRINT_MIS_dword(asd_ha, TIMEOUT_CONST); + + asd_printk("MDP 0 >>>>\n"); + asd_printk("%-20s %6s %6s %6s %6s %6s %6s %6s %6s\n", + "Mode: ", "0", "1", "2", "3", "4", "5", "6", "7"); + PRINT_CMDP_word(asd_ha, LRM_SAVE_SINDEX); + PRINT_CMDP_word(asd_ha, LRM_SAVE_SCBPTR); + PRINT_CMDP_word(asd_ha, Q_LINK_HEAD); + PRINT_CMDP_word(asd_ha, Q_LINK_TAIL); + PRINT_CMDP_byte(asd_ha, LRM_SAVE_SCRPAGE); + + asd_printk("MDP 0 Mode 8 >>>>\n"); + PRINT_MIS_word(asd_ha, RET_ADDR); + PRINT_MIS_word(asd_ha, RET_SCBPTR); + PRINT_MIS_word(asd_ha, SAVE_SCBPTR); + PRINT_MIS_word(asd_ha, EMPTY_TRANS_CTX); + PRINT_MIS_word(asd_ha, RESP_LEN); + PRINT_MIS_word(asd_ha, TMF_SCBPTR); + PRINT_MIS_word(asd_ha, GLOBAL_PREV_SCB); + PRINT_MIS_word(asd_ha, GLOBAL_HEAD); + PRINT_MIS_word(asd_ha, CLEAR_LU_HEAD); + PRINT_MIS_byte(asd_ha, TMF_OPCODE); + PRINT_MIS_byte(asd_ha, SCRATCH_FLAGS); + PRINT_MIS_word(asd_ha, HSB_SITE); + PRINT_MIS_word(asd_ha, FIRST_INV_SCB_SITE); + PRINT_MIS_word(asd_ha, FIRST_INV_DDB_SITE); + + asd_printk("MDP 1 Mode 8 >>>>\n"); + PRINT_MIS_qword(asd_ha, LUN_TO_CLEAR); + PRINT_MIS_qword(asd_ha, LUN_TO_CHECK); + + asd_printk("MDP 2 Mode 8 >>>>\n"); + PRINT_MIS_qword(asd_ha, HQ_NEW_POINTER); + PRINT_MIS_qword(asd_ha, HQ_DONE_BASE); + PRINT_MIS_dword(asd_ha, HQ_DONE_POINTER); + PRINT_MIS_byte(asd_ha, HQ_DONE_PASS); +} + +#define PRINT_LREG_8bit(_h, _lseq, _n) \ + asd_printk(STR_8BIT, #_n, _n, asd_read_reg_byte(_h, Lm##_n(_lseq))) +#define PRINT_LREG_16bit(_h, _lseq, _n) \ + asd_printk(STR_16BIT, #_n, _n, asd_read_reg_word(_h, Lm##_n(_lseq))) +#define PRINT_LREG_32bit(_h, _lseq, _n) \ + asd_printk(STR_32BIT, #_n, _n, asd_read_reg_dword(_h, Lm##_n(_lseq))) + +#define PRINT_LMIP_byte(_h, _lseq, _n) \ + asd_printk(STR_8BIT, #_n, LmSEQ_##_n(_lseq)-LmSCRATCH(_lseq), \ + asd_read_reg_byte(_h, LmSEQ_##_n(_lseq))) +#define PRINT_LMIP_word(_h, _lseq, _n) \ + asd_printk(STR_16BIT, #_n, LmSEQ_##_n(_lseq)-LmSCRATCH(_lseq), \ + asd_read_reg_word(_h, LmSEQ_##_n(_lseq))) +#define PRINT_LMIP_dword(_h, _lseq, _n) \ + asd_printk(STR_32BIT, #_n, LmSEQ_##_n(_lseq)-LmSCRATCH(_lseq), \ + asd_read_reg_dword(_h, LmSEQ_##_n(_lseq))) +#define PRINT_LMIP_qword(_h, _lseq, _n) \ + asd_printk(STR_64BIT, #_n, LmSEQ_##_n(_lseq)-LmSCRATCH(_lseq), \ + (unsigned long long)(((unsigned long long) \ + asd_read_reg_dword(_h, LmSEQ_##_n(_lseq))) \ + | (((unsigned long long) \ + asd_read_reg_dword(_h, LmSEQ_##_n(_lseq)+4))<<32))) + +static void asd_print_lseq_cio_reg(struct asd_ha_struct *asd_ha, + u32 lseq_cio_addr, int i) +{ + switch (LSEQmCIOREGS[i].width) { + case 8: + asd_printk("%20s[0x%x]: 0x%02x\n", LSEQmCIOREGS[i].name, + LSEQmCIOREGS[i].offs, + asd_read_reg_byte(asd_ha, lseq_cio_addr + + LSEQmCIOREGS[i].offs)); + + break; + case 16: + asd_printk("%20s[0x%x]: 0x%04x\n", LSEQmCIOREGS[i].name, + LSEQmCIOREGS[i].offs, + asd_read_reg_word(asd_ha, lseq_cio_addr + + LSEQmCIOREGS[i].offs)); + + break; + case 32: + asd_printk("%20s[0x%x]: 0x%08x\n", LSEQmCIOREGS[i].name, + LSEQmCIOREGS[i].offs, + asd_read_reg_dword(asd_ha, lseq_cio_addr + + LSEQmCIOREGS[i].offs)); + break; + } +} + +static void asd_dump_lseq_state(struct asd_ha_struct *asd_ha, int lseq) +{ + u32 moffs; + int mode; + + asd_printk("LSEQ %d STATE\n", lseq); + + asd_printk("LSEQ%d: ARP2 REGISTERS\n", lseq); + PRINT_LREG_32bit(asd_ha, lseq, ARP2CTL); + PRINT_LREG_32bit(asd_ha, lseq, ARP2INT); + PRINT_LREG_32bit(asd_ha, lseq, ARP2INTEN); + PRINT_LREG_8bit(asd_ha, lseq, MODEPTR); + PRINT_LREG_8bit(asd_ha, lseq, ALTMODE); + PRINT_LREG_8bit(asd_ha, lseq, FLAG); + PRINT_LREG_8bit(asd_ha, lseq, ARP2INTCTL); + PRINT_LREG_16bit(asd_ha, lseq, STACK); + PRINT_LREG_16bit(asd_ha, lseq, PRGMCNT); + PRINT_LREG_16bit(asd_ha, lseq, ACCUM); + PRINT_LREG_16bit(asd_ha, lseq, SINDEX); + PRINT_LREG_16bit(asd_ha, lseq, DINDEX); + PRINT_LREG_8bit(asd_ha, lseq, SINDIR); + PRINT_LREG_8bit(asd_ha, lseq, DINDIR); + PRINT_LREG_8bit(asd_ha, lseq, JUMLDIR); + PRINT_LREG_8bit(asd_ha, lseq, ARP2HALTCODE); + PRINT_LREG_16bit(asd_ha, lseq, CURRADDR); + PRINT_LREG_16bit(asd_ha, lseq, LASTADDR); + PRINT_LREG_16bit(asd_ha, lseq, NXTLADDR); + + asd_printk("LSEQ%d: IOP REGISTERS\n", lseq); + + PRINT_LREG_32bit(asd_ha, lseq, MODECTL); + PRINT_LREG_32bit(asd_ha, lseq, DBGMODE); + PRINT_LREG_32bit(asd_ha, lseq, CONTROL); + PRINT_REG_32bit(asd_ha, BISTCTL0, LmBISTCTL0(lseq)); + PRINT_REG_32bit(asd_ha, BISTCTL1, LmBISTCTL1(lseq)); + + asd_printk("LSEQ%d: CIO REGISTERS\n", lseq); + asd_printk("Mode common:\n"); + + for (mode = 0; mode < 8; mode++) { + u32 lseq_cio_addr = LmSEQ_PHY_BASE(mode, lseq); + int i; + + for (i = 0; LSEQmCIOREGS[i].name; i++) + if (LSEQmCIOREGS[i].mode == MODE_COMMON) + asd_print_lseq_cio_reg(asd_ha,lseq_cio_addr,i); + } + + asd_printk("Mode unique:\n"); + for (mode = 0; mode < 8; mode++) { + u32 lseq_cio_addr = LmSEQ_PHY_BASE(mode, lseq); + int i; + + asd_printk("Mode %d\n", mode); + for (i = 0; LSEQmCIOREGS[i].name; i++) { + if (!(LSEQmCIOREGS[i].mode & (1 << mode))) + continue; + asd_print_lseq_cio_reg(asd_ha, lseq_cio_addr, i); + } + } + + asd_printk("SCRATCH MEMORY\n"); + + asd_printk("LSEQ%d MIP 0 >>>>\n", lseq); + PRINT_LMIP_word(asd_ha, lseq, Q_TGTXFR_HEAD); + PRINT_LMIP_word(asd_ha, lseq, Q_TGTXFR_TAIL); + PRINT_LMIP_byte(asd_ha, lseq, LINK_NUMBER); + PRINT_LMIP_byte(asd_ha, lseq, SCRATCH_FLAGS); + PRINT_LMIP_qword(asd_ha, lseq, CONNECTION_STATE); + PRINT_LMIP_word(asd_ha, lseq, CONCTL); + PRINT_LMIP_byte(asd_ha, lseq, CONSTAT); + PRINT_LMIP_byte(asd_ha, lseq, CONNECTION_MODES); + PRINT_LMIP_word(asd_ha, lseq, REG1_ISR); + PRINT_LMIP_word(asd_ha, lseq, REG2_ISR); + PRINT_LMIP_word(asd_ha, lseq, REG3_ISR); + PRINT_LMIP_qword(asd_ha, lseq,REG0_ISR); + + asd_printk("LSEQ%d MIP 1 >>>>\n", lseq); + PRINT_LMIP_word(asd_ha, lseq, EST_NEXUS_SCBPTR0); + PRINT_LMIP_word(asd_ha, lseq, EST_NEXUS_SCBPTR1); + PRINT_LMIP_word(asd_ha, lseq, EST_NEXUS_SCBPTR2); + PRINT_LMIP_word(asd_ha, lseq, EST_NEXUS_SCBPTR3); + PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_OPCODE0); + PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_OPCODE1); + PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_OPCODE2); + PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_OPCODE3); + PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_HEAD); + PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_SCB_TAIL); + PRINT_LMIP_byte(asd_ha, lseq, EST_NEXUS_BUF_AVAIL); + PRINT_LMIP_dword(asd_ha, lseq, TIMEOUT_CONST); + PRINT_LMIP_word(asd_ha, lseq, ISR_SAVE_SINDEX); + PRINT_LMIP_word(asd_ha, lseq, ISR_SAVE_DINDEX); + + asd_printk("LSEQ%d MIP 2 >>>>\n", lseq); + PRINT_LMIP_word(asd_ha, lseq, EMPTY_SCB_PTR0); + PRINT_LMIP_word(asd_ha, lseq, EMPTY_SCB_PTR1); + PRINT_LMIP_word(asd_ha, lseq, EMPTY_SCB_PTR2); + PRINT_LMIP_word(asd_ha, lseq, EMPTY_SCB_PTR3); + PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_OPCD0); + PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_OPCD1); + PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_OPCD2); + PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_OPCD3); + PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_HEAD); + PRINT_LMIP_byte(asd_ha, lseq, EMPTY_SCB_TAIL); + PRINT_LMIP_byte(asd_ha, lseq, EMPTY_BUFS_AVAIL); + + asd_printk("LSEQ%d MIP 3 >>>>\n", lseq); + PRINT_LMIP_dword(asd_ha, lseq, DEV_PRES_TMR_TOUT_CONST); + PRINT_LMIP_dword(asd_ha, lseq, SATA_INTERLOCK_TIMEOUT); + PRINT_LMIP_dword(asd_ha, lseq, SRST_ASSERT_TIMEOUT); + PRINT_LMIP_dword(asd_ha, lseq, RCV_FIS_TIMEOUT); + PRINT_LMIP_dword(asd_ha, lseq, ONE_MILLISEC_TIMEOUT); + PRINT_LMIP_dword(asd_ha, lseq, TEN_MS_COMINIT_TIMEOUT); + PRINT_LMIP_dword(asd_ha, lseq, SMP_RCV_TIMEOUT); + + for (mode = 0; mode < 3; mode++) { + asd_printk("LSEQ%d MDP 0 MODE %d >>>>\n", lseq, mode); + moffs = mode * LSEQ_MODE_SCRATCH_SIZE; + + asd_printk(STR_16BIT, "RET_ADDR", 0, + asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR(lseq) + + moffs)); + asd_printk(STR_16BIT, "REG0_MODE", 2, + asd_read_reg_word(asd_ha, LmSEQ_REG0_MODE(lseq) + + moffs)); + asd_printk(STR_16BIT, "MODE_FLAGS", 4, + asd_read_reg_word(asd_ha, LmSEQ_MODE_FLAGS(lseq) + + moffs)); + asd_printk(STR_16BIT, "RET_ADDR2", 0x6, + asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR2(lseq) + + moffs)); + asd_printk(STR_16BIT, "RET_ADDR1", 0x8, + asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR1(lseq) + + moffs)); + asd_printk(STR_8BIT, "OPCODE_TO_CSEQ", 0xB, + asd_read_reg_byte(asd_ha, LmSEQ_OPCODE_TO_CSEQ(lseq) + + moffs)); + asd_printk(STR_16BIT, "DATA_TO_CSEQ", 0xC, + asd_read_reg_word(asd_ha, LmSEQ_DATA_TO_CSEQ(lseq) + + moffs)); + } + + asd_printk("LSEQ%d MDP 0 MODE 5 >>>>\n", lseq); + moffs = LSEQ_MODE5_PAGE0_OFFSET; + asd_printk(STR_16BIT, "RET_ADDR", 0, + asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR(lseq) + moffs)); + asd_printk(STR_16BIT, "REG0_MODE", 2, + asd_read_reg_word(asd_ha, LmSEQ_REG0_MODE(lseq) + moffs)); + asd_printk(STR_16BIT, "MODE_FLAGS", 4, + asd_read_reg_word(asd_ha, LmSEQ_MODE_FLAGS(lseq) + moffs)); + asd_printk(STR_16BIT, "RET_ADDR2", 0x6, + asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR2(lseq) + moffs)); + asd_printk(STR_16BIT, "RET_ADDR1", 0x8, + asd_read_reg_word(asd_ha, LmSEQ_RET_ADDR1(lseq) + moffs)); + asd_printk(STR_8BIT, "OPCODE_TO_CSEQ", 0xB, + asd_read_reg_byte(asd_ha, LmSEQ_OPCODE_TO_CSEQ(lseq) + moffs)); + asd_printk(STR_16BIT, "DATA_TO_CSEQ", 0xC, + asd_read_reg_word(asd_ha, LmSEQ_DATA_TO_CSEQ(lseq) + moffs)); + + asd_printk("LSEQ%d MDP 0 MODE 0 >>>>\n", lseq); + PRINT_LMIP_word(asd_ha, lseq, FIRST_INV_DDB_SITE); + PRINT_LMIP_word(asd_ha, lseq, EMPTY_TRANS_CTX); + PRINT_LMIP_word(asd_ha, lseq, RESP_LEN); + PRINT_LMIP_word(asd_ha, lseq, FIRST_INV_SCB_SITE); + PRINT_LMIP_dword(asd_ha, lseq, INTEN_SAVE); + PRINT_LMIP_byte(asd_ha, lseq, LINK_RST_FRM_LEN); + PRINT_LMIP_byte(asd_ha, lseq, LINK_RST_PROTOCOL); + PRINT_LMIP_byte(asd_ha, lseq, RESP_STATUS); + PRINT_LMIP_byte(asd_ha, lseq, LAST_LOADED_SGE); + PRINT_LMIP_byte(asd_ha, lseq, SAVE_SCBPTR); + + asd_printk("LSEQ%d MDP 0 MODE 1 >>>>\n", lseq); + PRINT_LMIP_word(asd_ha, lseq, Q_XMIT_HEAD); + PRINT_LMIP_word(asd_ha, lseq, M1_EMPTY_TRANS_CTX); + PRINT_LMIP_word(asd_ha, lseq, INI_CONN_TAG); + PRINT_LMIP_byte(asd_ha, lseq, FAILED_OPEN_STATUS); + PRINT_LMIP_byte(asd_ha, lseq, XMIT_REQUEST_TYPE); + PRINT_LMIP_byte(asd_ha, lseq, M1_RESP_STATUS); + PRINT_LMIP_byte(asd_ha, lseq, M1_LAST_LOADED_SGE); + PRINT_LMIP_word(asd_ha, lseq, M1_SAVE_SCBPTR); + + asd_printk("LSEQ%d MDP 0 MODE 2 >>>>\n", lseq); + PRINT_LMIP_word(asd_ha, lseq, PORT_COUNTER); + PRINT_LMIP_word(asd_ha, lseq, PM_TABLE_PTR); + PRINT_LMIP_word(asd_ha, lseq, SATA_INTERLOCK_TMR_SAVE); + PRINT_LMIP_word(asd_ha, lseq, IP_BITL); + PRINT_LMIP_word(asd_ha, lseq, COPY_SMP_CONN_TAG); + PRINT_LMIP_byte(asd_ha, lseq, P0M2_OFFS1AH); + + asd_printk("LSEQ%d MDP 0 MODE 4/5 >>>>\n", lseq); + PRINT_LMIP_byte(asd_ha, lseq, SAVED_OOB_STATUS); + PRINT_LMIP_byte(asd_ha, lseq, SAVED_OOB_MODE); + PRINT_LMIP_word(asd_ha, lseq, Q_LINK_HEAD); + PRINT_LMIP_byte(asd_ha, lseq, LINK_RST_ERR); + PRINT_LMIP_byte(asd_ha, lseq, SAVED_OOB_SIGNALS); + PRINT_LMIP_byte(asd_ha, lseq, SAS_RESET_MODE); + PRINT_LMIP_byte(asd_ha, lseq, LINK_RESET_RETRY_COUNT); + PRINT_LMIP_byte(asd_ha, lseq, NUM_LINK_RESET_RETRIES); + PRINT_LMIP_word(asd_ha, lseq, OOB_INT_ENABLES); + PRINT_LMIP_word(asd_ha, lseq, NOTIFY_TIMER_TIMEOUT); + PRINT_LMIP_word(asd_ha, lseq, NOTIFY_TIMER_DOWN_COUNT); + + asd_printk("LSEQ%d MDP 1 MODE 0 >>>>\n", lseq); + PRINT_LMIP_qword(asd_ha, lseq, SG_LIST_PTR_ADDR0); + PRINT_LMIP_qword(asd_ha, lseq, SG_LIST_PTR_ADDR1); + + asd_printk("LSEQ%d MDP 1 MODE 1 >>>>\n", lseq); + PRINT_LMIP_qword(asd_ha, lseq, M1_SG_LIST_PTR_ADDR0); + PRINT_LMIP_qword(asd_ha, lseq, M1_SG_LIST_PTR_ADDR1); + + asd_printk("LSEQ%d MDP 1 MODE 2 >>>>\n", lseq); + PRINT_LMIP_dword(asd_ha, lseq, INVALID_DWORD_COUNT); + PRINT_LMIP_dword(asd_ha, lseq, DISPARITY_ERROR_COUNT); + PRINT_LMIP_dword(asd_ha, lseq, LOSS_OF_SYNC_COUNT); + + asd_printk("LSEQ%d MDP 1 MODE 4/5 >>>>\n", lseq); + PRINT_LMIP_dword(asd_ha, lseq, FRAME_TYPE_MASK); + PRINT_LMIP_dword(asd_ha, lseq, HASHED_SRC_ADDR_MASK_PRINT); + PRINT_LMIP_byte(asd_ha, lseq, NUM_FILL_BYTES_MASK); + PRINT_LMIP_word(asd_ha, lseq, TAG_MASK); + PRINT_LMIP_word(asd_ha, lseq, TARGET_PORT_XFER_TAG); + PRINT_LMIP_dword(asd_ha, lseq, DATA_OFFSET); + + asd_printk("LSEQ%d MDP 2 MODE 0 >>>>\n", lseq); + PRINT_LMIP_dword(asd_ha, lseq, SMP_RCV_TIMER_TERM_TS); + PRINT_LMIP_byte(asd_ha, lseq, DEVICE_BITS); + PRINT_LMIP_word(asd_ha, lseq, SDB_DDB); + PRINT_LMIP_word(asd_ha, lseq, SDB_NUM_TAGS); + PRINT_LMIP_word(asd_ha, lseq, SDB_CURR_TAG); + + asd_printk("LSEQ%d MDP 2 MODE 1 >>>>\n", lseq); + PRINT_LMIP_qword(asd_ha, lseq, TX_ID_ADDR_FRAME); + PRINT_LMIP_dword(asd_ha, lseq, OPEN_TIMER_TERM_TS); + PRINT_LMIP_dword(asd_ha, lseq, SRST_AS_TIMER_TERM_TS); + PRINT_LMIP_dword(asd_ha, lseq, LAST_LOADED_SG_EL); + + asd_printk("LSEQ%d MDP 2 MODE 2 >>>>\n", lseq); + PRINT_LMIP_dword(asd_ha, lseq, CLOSE_TIMER_TERM_TS); + PRINT_LMIP_dword(asd_ha, lseq, BREAK_TIMER_TERM_TS); + PRINT_LMIP_dword(asd_ha, lseq, DWS_RESET_TIMER_TERM_TS); + PRINT_LMIP_dword(asd_ha, lseq, SATA_INTERLOCK_TIMER_TERM_TS); + PRINT_LMIP_dword(asd_ha, lseq, MCTL_TIMER_TERM_TS); + + asd_printk("LSEQ%d MDP 2 MODE 4/5 >>>>\n", lseq); + PRINT_LMIP_dword(asd_ha, lseq, COMINIT_TIMER_TERM_TS); + PRINT_LMIP_dword(asd_ha, lseq, RCV_ID_TIMER_TERM_TS); + PRINT_LMIP_dword(asd_ha, lseq, RCV_FIS_TIMER_TERM_TS); + PRINT_LMIP_dword(asd_ha, lseq, DEV_PRES_TIMER_TERM_TS); +} + +/** + * asd_dump_ddb_site -- dump a CSEQ DDB site + * @asd_ha: pointer to host adapter structure + * @site_no: site number of interest + */ +void asd_dump_target_ddb(struct asd_ha_struct *asd_ha, u16 site_no) +{ + if (site_no >= asd_ha->hw_prof.max_ddbs) + return; + +#define DDB_FIELDB(__name) \ + asd_ddbsite_read_byte(asd_ha, site_no, \ + offsetof(struct asd_ddb_ssp_smp_target_port, __name)) +#define DDB2_FIELDB(__name) \ + asd_ddbsite_read_byte(asd_ha, site_no, \ + offsetof(struct asd_ddb_stp_sata_target_port, __name)) +#define DDB_FIELDW(__name) \ + asd_ddbsite_read_word(asd_ha, site_no, \ + offsetof(struct asd_ddb_ssp_smp_target_port, __name)) + +#define DDB_FIELDD(__name) \ + asd_ddbsite_read_dword(asd_ha, site_no, \ + offsetof(struct asd_ddb_ssp_smp_target_port, __name)) + + asd_printk("DDB: 0x%02x\n", site_no); + asd_printk("conn_type: 0x%02x\n", DDB_FIELDB(conn_type)); + asd_printk("conn_rate: 0x%02x\n", DDB_FIELDB(conn_rate)); + asd_printk("init_conn_tag: 0x%04x\n", be16_to_cpu(DDB_FIELDW(init_conn_tag))); + asd_printk("send_queue_head: 0x%04x\n", be16_to_cpu(DDB_FIELDW(send_queue_head))); + asd_printk("sq_suspended: 0x%02x\n", DDB_FIELDB(sq_suspended)); + asd_printk("DDB Type: 0x%02x\n", DDB_FIELDB(ddb_type)); + asd_printk("AWT Default: 0x%04x\n", DDB_FIELDW(awt_def)); + asd_printk("compat_features: 0x%02x\n", DDB_FIELDB(compat_features)); + asd_printk("Pathway Blocked Count: 0x%02x\n", + DDB_FIELDB(pathway_blocked_count)); + asd_printk("arb_wait_time: 0x%04x\n", DDB_FIELDW(arb_wait_time)); + asd_printk("more_compat_features: 0x%08x\n", + DDB_FIELDD(more_compat_features)); + asd_printk("Conn Mask: 0x%02x\n", DDB_FIELDB(conn_mask)); + asd_printk("flags: 0x%02x\n", DDB_FIELDB(flags)); + asd_printk("flags2: 0x%02x\n", DDB2_FIELDB(flags2)); + asd_printk("ExecQ Tail: 0x%04x\n",DDB_FIELDW(exec_queue_tail)); + asd_printk("SendQ Tail: 0x%04x\n",DDB_FIELDW(send_queue_tail)); + asd_printk("Active Task Count: 0x%04x\n", + DDB_FIELDW(active_task_count)); + asd_printk("ITNL Reason: 0x%02x\n", DDB_FIELDB(itnl_reason)); + asd_printk("ITNL Timeout Const: 0x%04x\n", DDB_FIELDW(itnl_timeout)); + asd_printk("ITNL timestamp: 0x%08x\n", DDB_FIELDD(itnl_timestamp)); +} + +void asd_dump_ddb_0(struct asd_ha_struct *asd_ha) +{ +#define DDB0_FIELDB(__name) \ + asd_ddbsite_read_byte(asd_ha, 0, \ + offsetof(struct asd_ddb_seq_shared, __name)) +#define DDB0_FIELDW(__name) \ + asd_ddbsite_read_word(asd_ha, 0, \ + offsetof(struct asd_ddb_seq_shared, __name)) + +#define DDB0_FIELDD(__name) \ + asd_ddbsite_read_dword(asd_ha,0 , \ + offsetof(struct asd_ddb_seq_shared, __name)) + +#define DDB0_FIELDA(__name, _o) \ + asd_ddbsite_read_byte(asd_ha, 0, \ + offsetof(struct asd_ddb_seq_shared, __name)+_o) + + + asd_printk("DDB: 0\n"); + asd_printk("q_free_ddb_head:%04x\n", DDB0_FIELDW(q_free_ddb_head)); + asd_printk("q_free_ddb_tail:%04x\n", DDB0_FIELDW(q_free_ddb_tail)); + asd_printk("q_free_ddb_cnt:%04x\n", DDB0_FIELDW(q_free_ddb_cnt)); + asd_printk("q_used_ddb_head:%04x\n", DDB0_FIELDW(q_used_ddb_head)); + asd_printk("q_used_ddb_tail:%04x\n", DDB0_FIELDW(q_used_ddb_tail)); + asd_printk("shared_mem_lock:%04x\n", DDB0_FIELDW(shared_mem_lock)); + asd_printk("smp_conn_tag:%04x\n", DDB0_FIELDW(smp_conn_tag)); + asd_printk("est_nexus_buf_cnt:%04x\n", DDB0_FIELDW(est_nexus_buf_cnt)); + asd_printk("est_nexus_buf_thresh:%04x\n", + DDB0_FIELDW(est_nexus_buf_thresh)); + asd_printk("conn_not_active:%02x\n", DDB0_FIELDB(conn_not_active)); + asd_printk("phy_is_up:%02x\n", DDB0_FIELDB(phy_is_up)); + asd_printk("port_map_by_links:%02x %02x %02x %02x " + "%02x %02x %02x %02x\n", + DDB0_FIELDA(port_map_by_links, 0), + DDB0_FIELDA(port_map_by_links, 1), + DDB0_FIELDA(port_map_by_links, 2), + DDB0_FIELDA(port_map_by_links, 3), + DDB0_FIELDA(port_map_by_links, 4), + DDB0_FIELDA(port_map_by_links, 5), + DDB0_FIELDA(port_map_by_links, 6), + DDB0_FIELDA(port_map_by_links, 7)); +} + +static void asd_dump_scb_site(struct asd_ha_struct *asd_ha, u16 site_no) +{ + +#define SCB_FIELDB(__name) \ + asd_scbsite_read_byte(asd_ha, site_no, sizeof(struct scb_header) \ + + offsetof(struct initiate_ssp_task, __name)) +#define SCB_FIELDW(__name) \ + asd_scbsite_read_word(asd_ha, site_no, sizeof(struct scb_header) \ + + offsetof(struct initiate_ssp_task, __name)) +#define SCB_FIELDD(__name) \ + asd_scbsite_read_dword(asd_ha, site_no, sizeof(struct scb_header) \ + + offsetof(struct initiate_ssp_task, __name)) + + asd_printk("Total Xfer Len: 0x%08x.\n", SCB_FIELDD(total_xfer_len)); + asd_printk("Frame Type: 0x%02x.\n", SCB_FIELDB(ssp_frame.frame_type)); + asd_printk("Tag: 0x%04x.\n", SCB_FIELDW(ssp_frame.tag)); + asd_printk("Target Port Xfer Tag: 0x%04x.\n", + SCB_FIELDW(ssp_frame.tptt)); + asd_printk("Data Offset: 0x%08x.\n", SCB_FIELDW(ssp_frame.data_offs)); + asd_printk("Retry Count: 0x%02x.\n", SCB_FIELDB(retry_count)); +} + +/** + * asd_dump_scb_sites -- dump currently used CSEQ SCB sites + * @asd_ha: pointer to host adapter struct + */ +void asd_dump_scb_sites(struct asd_ha_struct *asd_ha) +{ + u16 site_no; + + for (site_no = 0; site_no < asd_ha->hw_prof.max_scbs; site_no++) { + u8 opcode; + + if (!SCB_SITE_VALID(site_no)) + continue; + + /* We are only interested in SCB sites currently used. + */ + opcode = asd_scbsite_read_byte(asd_ha, site_no, + offsetof(struct scb_header, + opcode)); + if (opcode == 0xFF) + continue; + + asd_printk("\nSCB: 0x%x\n", site_no); + asd_dump_scb_site(asd_ha, site_no); + } +} + +/** + * ads_dump_seq_state -- dump CSEQ and LSEQ states + * @asd_ha: pointer to host adapter structure + * @lseq_mask: mask of LSEQs of interest + */ +void asd_dump_seq_state(struct asd_ha_struct *asd_ha, u8 lseq_mask) +{ + int lseq; + + asd_dump_cseq_state(asd_ha); + + if (lseq_mask != 0) + for_each_sequencer(lseq_mask, lseq_mask, lseq) + asd_dump_lseq_state(asd_ha, lseq); +} + +void asd_dump_frame_rcvd(struct asd_phy *phy, + struct done_list_struct *dl) +{ + unsigned long flags; + int i; + + switch ((dl->status_block[1] & 0x70) >> 3) { + case SAS_PROTO_STP: + ASD_DPRINTK("STP proto device-to-host FIS:\n"); + break; + default: + case SAS_PROTO_SSP: + ASD_DPRINTK("SAS proto IDENTIFY:\n"); + break; + } + spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags); + for (i = 0; i < phy->sas_phy.frame_rcvd_size; i+=4) + ASD_DPRINTK("%02x: %02x %02x %02x %02x\n", + i, + phy->frame_rcvd[i], + phy->frame_rcvd[i+1], + phy->frame_rcvd[i+2], + phy->frame_rcvd[i+3]); + spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags); +} + +static inline void asd_dump_scb(struct asd_ascb *ascb, int ind) +{ + asd_printk("scb%d: vaddr: 0x%p, dma_handle: 0x%llx, next: 0x%llx, " + "index:%d, opcode:0x%02x\n", + ind, ascb->dma_scb.vaddr, + (unsigned long long)ascb->dma_scb.dma_handle, + (unsigned long long) + le64_to_cpu(ascb->scb->header.next_scb), + le16_to_cpu(ascb->scb->header.index), + ascb->scb->header.opcode); +} + +void asd_dump_scb_list(struct asd_ascb *ascb, int num) +{ + int i = 0; + + asd_printk("dumping %d scbs:\n", num); + + asd_dump_scb(ascb, i++); + --num; + + if (num > 0 && !list_empty(&ascb->list)) { + struct list_head *el; + + list_for_each(el, &ascb->list) { + struct asd_ascb *s = list_entry(el, struct asd_ascb, + list); + asd_dump_scb(s, i++); + if (--num <= 0) + break; + } + } +} + +#endif /* ASD_DEBUG */ diff --git a/drivers/scsi/aic94xx/aic94xx_dump.h b/drivers/scsi/aic94xx/aic94xx_dump.h new file mode 100644 index 00000000000..0c388e7da6b --- /dev/null +++ b/drivers/scsi/aic94xx/aic94xx_dump.h @@ -0,0 +1,52 @@ +/* + * Aic94xx SAS/SATA driver dump header file. + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This file is part of the aic94xx driver. + * + * The aic94xx driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * The aic94xx driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the aic94xx driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#ifndef _AIC94XX_DUMP_H_ +#define _AIC94XX_DUMP_H_ + +#ifdef ASD_DEBUG + +void asd_dump_ddb_0(struct asd_ha_struct *asd_ha); +void asd_dump_target_ddb(struct asd_ha_struct *asd_ha, u16 site_no); +void asd_dump_scb_sites(struct asd_ha_struct *asd_ha); +void asd_dump_seq_state(struct asd_ha_struct *asd_ha, u8 lseq_mask); +void asd_dump_frame_rcvd(struct asd_phy *phy, + struct done_list_struct *dl); +void asd_dump_scb_list(struct asd_ascb *ascb, int num); +#else /* ASD_DEBUG */ + +static inline void asd_dump_ddb_0(struct asd_ha_struct *asd_ha) { } +static inline void asd_dump_target_ddb(struct asd_ha_struct *asd_ha, + u16 site_no) { } +static inline void asd_dump_scb_sites(struct asd_ha_struct *asd_ha) { } +static inline void asd_dump_seq_state(struct asd_ha_struct *asd_ha, + u8 lseq_mask) { } +static inline void asd_dump_frame_rcvd(struct asd_phy *phy, + struct done_list_struct *dl) { } +static inline void asd_dump_scb_list(struct asd_ascb *ascb, int num) { } +#endif /* ASD_DEBUG */ + +#endif /* _AIC94XX_DUMP_H_ */ diff --git a/drivers/scsi/aic94xx/aic94xx_hwi.c b/drivers/scsi/aic94xx/aic94xx_hwi.c new file mode 100644 index 00000000000..1d8c5e5f442 --- /dev/null +++ b/drivers/scsi/aic94xx/aic94xx_hwi.c @@ -0,0 +1,1376 @@ +/* + * Aic94xx SAS/SATA driver hardware interface. + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This file is part of the aic94xx driver. + * + * The aic94xx driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * The aic94xx driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the aic94xx driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/module.h> + +#include "aic94xx.h" +#include "aic94xx_reg.h" +#include "aic94xx_hwi.h" +#include "aic94xx_seq.h" +#include "aic94xx_dump.h" + +u32 MBAR0_SWB_SIZE; + +/* ---------- Initialization ---------- */ + +static void asd_get_user_sas_addr(struct asd_ha_struct *asd_ha) +{ + extern char sas_addr_str[]; + /* If the user has specified a WWN it overrides other settings + */ + if (sas_addr_str[0] != '\0') + asd_destringify_sas_addr(asd_ha->hw_prof.sas_addr, + sas_addr_str); + else if (asd_ha->hw_prof.sas_addr[0] != 0) + asd_stringify_sas_addr(sas_addr_str, asd_ha->hw_prof.sas_addr); +} + +static void asd_propagate_sas_addr(struct asd_ha_struct *asd_ha) +{ + int i; + + for (i = 0; i < ASD_MAX_PHYS; i++) { + if (asd_ha->hw_prof.phy_desc[i].sas_addr[0] == 0) + continue; + /* Set a phy's address only if it has none. + */ + ASD_DPRINTK("setting phy%d addr to %llx\n", i, + SAS_ADDR(asd_ha->hw_prof.sas_addr)); + memcpy(asd_ha->hw_prof.phy_desc[i].sas_addr, + asd_ha->hw_prof.sas_addr, SAS_ADDR_SIZE); + } +} + +/* ---------- PHY initialization ---------- */ + +static void asd_init_phy_identify(struct asd_phy *phy) +{ + phy->identify_frame = phy->id_frm_tok->vaddr; + + memset(phy->identify_frame, 0, sizeof(*phy->identify_frame)); + + phy->identify_frame->dev_type = SAS_END_DEV; + if (phy->sas_phy.role & PHY_ROLE_INITIATOR) + phy->identify_frame->initiator_bits = phy->sas_phy.iproto; + if (phy->sas_phy.role & PHY_ROLE_TARGET) + phy->identify_frame->target_bits = phy->sas_phy.tproto; + memcpy(phy->identify_frame->sas_addr, phy->phy_desc->sas_addr, + SAS_ADDR_SIZE); + phy->identify_frame->phy_id = phy->sas_phy.id; +} + +static int asd_init_phy(struct asd_phy *phy) +{ + struct asd_ha_struct *asd_ha = phy->sas_phy.ha->lldd_ha; + struct asd_sas_phy *sas_phy = &phy->sas_phy; + + sas_phy->enabled = 1; + sas_phy->class = SAS; + sas_phy->iproto = SAS_PROTO_ALL; + sas_phy->tproto = 0; + sas_phy->type = PHY_TYPE_PHYSICAL; + sas_phy->role = PHY_ROLE_INITIATOR; + sas_phy->oob_mode = OOB_NOT_CONNECTED; + sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN; + + phy->id_frm_tok = asd_alloc_coherent(asd_ha, + sizeof(*phy->identify_frame), + GFP_KERNEL); + if (!phy->id_frm_tok) { + asd_printk("no mem for IDENTIFY for phy%d\n", sas_phy->id); + return -ENOMEM; + } else + asd_init_phy_identify(phy); + + memset(phy->frame_rcvd, 0, sizeof(phy->frame_rcvd)); + + return 0; +} + +static int asd_init_phys(struct asd_ha_struct *asd_ha) +{ + u8 i; + u8 phy_mask = asd_ha->hw_prof.enabled_phys; + + for (i = 0; i < ASD_MAX_PHYS; i++) { + struct asd_phy *phy = &asd_ha->phys[i]; + + phy->phy_desc = &asd_ha->hw_prof.phy_desc[i]; + + phy->sas_phy.enabled = 0; + phy->sas_phy.id = i; + phy->sas_phy.sas_addr = &phy->phy_desc->sas_addr[0]; + phy->sas_phy.frame_rcvd = &phy->frame_rcvd[0]; + phy->sas_phy.ha = &asd_ha->sas_ha; + phy->sas_phy.lldd_phy = phy; + } + + /* Now enable and initialize only the enabled phys. */ + for_each_phy(phy_mask, phy_mask, i) { + int err = asd_init_phy(&asd_ha->phys[i]); + if (err) + return err; + } + + return 0; +} + +/* ---------- Sliding windows ---------- */ + +static int asd_init_sw(struct asd_ha_struct *asd_ha) +{ + struct pci_dev *pcidev = asd_ha->pcidev; + int err; + u32 v; + + /* Unlock MBARs */ + err = pci_read_config_dword(pcidev, PCI_CONF_MBAR_KEY, &v); + if (err) { + asd_printk("couldn't access conf. space of %s\n", + pci_name(pcidev)); + goto Err; + } + if (v) + err = pci_write_config_dword(pcidev, PCI_CONF_MBAR_KEY, v); + if (err) { + asd_printk("couldn't write to MBAR_KEY of %s\n", + pci_name(pcidev)); + goto Err; + } + + /* Set sliding windows A, B and C to point to proper internal + * memory regions. + */ + pci_write_config_dword(pcidev, PCI_CONF_MBAR0_SWA, REG_BASE_ADDR); + pci_write_config_dword(pcidev, PCI_CONF_MBAR0_SWB, + REG_BASE_ADDR_CSEQCIO); + pci_write_config_dword(pcidev, PCI_CONF_MBAR0_SWC, REG_BASE_ADDR_EXSI); + asd_ha->io_handle[0].swa_base = REG_BASE_ADDR; + asd_ha->io_handle[0].swb_base = REG_BASE_ADDR_CSEQCIO; + asd_ha->io_handle[0].swc_base = REG_BASE_ADDR_EXSI; + MBAR0_SWB_SIZE = asd_ha->io_handle[0].len - 0x80; + if (!asd_ha->iospace) { + /* MBAR1 will point to OCM (On Chip Memory) */ + pci_write_config_dword(pcidev, PCI_CONF_MBAR1, OCM_BASE_ADDR); + asd_ha->io_handle[1].swa_base = OCM_BASE_ADDR; + } + spin_lock_init(&asd_ha->iolock); +Err: + return err; +} + +/* ---------- SCB initialization ---------- */ + +/** + * asd_init_scbs - manually allocate the first SCB. + * @asd_ha: pointer to host adapter structure + * + * This allocates the very first SCB which would be sent to the + * sequencer for execution. Its bus address is written to + * CSEQ_Q_NEW_POINTER, mode page 2, mode 8. Since the bus address of + * the _next_ scb to be DMA-ed to the host adapter is read from the last + * SCB DMA-ed to the host adapter, we have to always stay one step + * ahead of the sequencer and keep one SCB already allocated. + */ +static int asd_init_scbs(struct asd_ha_struct *asd_ha) +{ + struct asd_seq_data *seq = &asd_ha->seq; + int bitmap_bytes; + + /* allocate the index array and bitmap */ + asd_ha->seq.tc_index_bitmap_bits = asd_ha->hw_prof.max_scbs; + asd_ha->seq.tc_index_array = kzalloc(asd_ha->seq.tc_index_bitmap_bits* + sizeof(void *), GFP_KERNEL); + if (!asd_ha->seq.tc_index_array) + return -ENOMEM; + + bitmap_bytes = (asd_ha->seq.tc_index_bitmap_bits+7)/8; + bitmap_bytes = BITS_TO_LONGS(bitmap_bytes*8)*sizeof(unsigned long); + asd_ha->seq.tc_index_bitmap = kzalloc(bitmap_bytes, GFP_KERNEL); + if (!asd_ha->seq.tc_index_bitmap) + return -ENOMEM; + + spin_lock_init(&seq->tc_index_lock); + + seq->next_scb.size = sizeof(struct scb); + seq->next_scb.vaddr = dma_pool_alloc(asd_ha->scb_pool, GFP_KERNEL, + &seq->next_scb.dma_handle); + if (!seq->next_scb.vaddr) { + kfree(asd_ha->seq.tc_index_bitmap); + kfree(asd_ha->seq.tc_index_array); + asd_ha->seq.tc_index_bitmap = NULL; + asd_ha->seq.tc_index_array = NULL; + return -ENOMEM; + } + + seq->pending = 0; + spin_lock_init(&seq->pend_q_lock); + INIT_LIST_HEAD(&seq->pend_q); + + return 0; +} + +static inline void asd_get_max_scb_ddb(struct asd_ha_struct *asd_ha) +{ + asd_ha->hw_prof.max_scbs = asd_get_cmdctx_size(asd_ha)/ASD_SCB_SIZE; + asd_ha->hw_prof.max_ddbs = asd_get_devctx_size(asd_ha)/ASD_DDB_SIZE; + ASD_DPRINTK("max_scbs:%d, max_ddbs:%d\n", + asd_ha->hw_prof.max_scbs, + asd_ha->hw_prof.max_ddbs); +} + +/* ---------- Done List initialization ---------- */ + +static void asd_dl_tasklet_handler(unsigned long); + +static int asd_init_dl(struct asd_ha_struct *asd_ha) +{ + asd_ha->seq.actual_dl + = asd_alloc_coherent(asd_ha, + ASD_DL_SIZE * sizeof(struct done_list_struct), + GFP_KERNEL); + if (!asd_ha->seq.actual_dl) + return -ENOMEM; + asd_ha->seq.dl = asd_ha->seq.actual_dl->vaddr; + asd_ha->seq.dl_toggle = ASD_DEF_DL_TOGGLE; + asd_ha->seq.dl_next = 0; + tasklet_init(&asd_ha->seq.dl_tasklet, asd_dl_tasklet_handler, + (unsigned long) asd_ha); + + return 0; +} + +/* ---------- EDB and ESCB init ---------- */ + +static int asd_alloc_edbs(struct asd_ha_struct *asd_ha, gfp_t gfp_flags) +{ + struct asd_seq_data *seq = &asd_ha->seq; + int i; + + seq->edb_arr = kmalloc(seq->num_edbs*sizeof(*seq->edb_arr), gfp_flags); + if (!seq->edb_arr) + return -ENOMEM; + + for (i = 0; i < seq->num_edbs; i++) { + seq->edb_arr[i] = asd_alloc_coherent(asd_ha, ASD_EDB_SIZE, + gfp_flags); + if (!seq->edb_arr[i]) + goto Err_unroll; + memset(seq->edb_arr[i]->vaddr, 0, ASD_EDB_SIZE); + } + + ASD_DPRINTK("num_edbs:%d\n", seq->num_edbs); + + return 0; + +Err_unroll: + for (i-- ; i >= 0; i--) + asd_free_coherent(asd_ha, seq->edb_arr[i]); + kfree(seq->edb_arr); + seq->edb_arr = NULL; + + return -ENOMEM; +} + +static int asd_alloc_escbs(struct asd_ha_struct *asd_ha, + gfp_t gfp_flags) +{ + struct asd_seq_data *seq = &asd_ha->seq; + struct asd_ascb *escb; + int i, escbs; + + seq->escb_arr = kmalloc(seq->num_escbs*sizeof(*seq->escb_arr), + gfp_flags); + if (!seq->escb_arr) + return -ENOMEM; + + escbs = seq->num_escbs; + escb = asd_ascb_alloc_list(asd_ha, &escbs, gfp_flags); + if (!escb) { + asd_printk("couldn't allocate list of escbs\n"); + goto Err; + } + seq->num_escbs -= escbs; /* subtract what was not allocated */ + ASD_DPRINTK("num_escbs:%d\n", seq->num_escbs); + + for (i = 0; i < seq->num_escbs; i++, escb = list_entry(escb->list.next, + struct asd_ascb, + list)) { + seq->escb_arr[i] = escb; + escb->scb->header.opcode = EMPTY_SCB; + } + + return 0; +Err: + kfree(seq->escb_arr); + seq->escb_arr = NULL; + return -ENOMEM; + +} + +static void asd_assign_edbs2escbs(struct asd_ha_struct *asd_ha) +{ + struct asd_seq_data *seq = &asd_ha->seq; + int i, k, z = 0; + + for (i = 0; i < seq->num_escbs; i++) { + struct asd_ascb *ascb = seq->escb_arr[i]; + struct empty_scb *escb = &ascb->scb->escb; + + ascb->edb_index = z; + + escb->num_valid = ASD_EDBS_PER_SCB; + + for (k = 0; k < ASD_EDBS_PER_SCB; k++) { + struct sg_el *eb = &escb->eb[k]; + struct asd_dma_tok *edb = seq->edb_arr[z++]; + + memset(eb, 0, sizeof(*eb)); + eb->bus_addr = cpu_to_le64(((u64) edb->dma_handle)); + eb->size = cpu_to_le32(((u32) edb->size)); + } + } +} + +/** + * asd_init_escbs -- allocate and initialize empty scbs + * @asd_ha: pointer to host adapter structure + * + * An empty SCB has sg_elements of ASD_EDBS_PER_SCB (7) buffers. + * They transport sense data, etc. + */ +static int asd_init_escbs(struct asd_ha_struct *asd_ha) +{ + struct asd_seq_data *seq = &asd_ha->seq; + int err = 0; + + /* Allocate two empty data buffers (edb) per sequencer. */ + int edbs = 2*(1+asd_ha->hw_prof.num_phys); + + seq->num_escbs = (edbs+ASD_EDBS_PER_SCB-1)/ASD_EDBS_PER_SCB; + seq->num_edbs = seq->num_escbs * ASD_EDBS_PER_SCB; + + err = asd_alloc_edbs(asd_ha, GFP_KERNEL); + if (err) { + asd_printk("couldn't allocate edbs\n"); + return err; + } + + err = asd_alloc_escbs(asd_ha, GFP_KERNEL); + if (err) { + asd_printk("couldn't allocate escbs\n"); + return err; + } + + asd_assign_edbs2escbs(asd_ha); + /* In order to insure that normal SCBs do not overfill sequencer + * memory and leave no space for escbs (halting condition), + * we increment pending here by the number of escbs. However, + * escbs are never pending. + */ + seq->pending = seq->num_escbs; + seq->can_queue = 1 + (asd_ha->hw_prof.max_scbs - seq->pending)/2; + + return 0; +} + +/* ---------- HW initialization ---------- */ + +/** + * asd_chip_hardrst -- hard reset the chip + * @asd_ha: pointer to host adapter structure + * + * This takes 16 cycles and is synchronous to CFCLK, which runs + * at 200 MHz, so this should take at most 80 nanoseconds. + */ +int asd_chip_hardrst(struct asd_ha_struct *asd_ha) +{ + int i; + int count = 100; + u32 reg; + + for (i = 0 ; i < 4 ; i++) { + asd_write_reg_dword(asd_ha, COMBIST, HARDRST); + } + + do { + udelay(1); + reg = asd_read_reg_dword(asd_ha, CHIMINT); + if (reg & HARDRSTDET) { + asd_write_reg_dword(asd_ha, CHIMINT, + HARDRSTDET|PORRSTDET); + return 0; + } + } while (--count > 0); + + return -ENODEV; +} + +/** + * asd_init_chip -- initialize the chip + * @asd_ha: pointer to host adapter structure + * + * Hard resets the chip, disables HA interrupts, downloads the sequnecer + * microcode and starts the sequencers. The caller has to explicitly + * enable HA interrupts with asd_enable_ints(asd_ha). + */ +static int asd_init_chip(struct asd_ha_struct *asd_ha) +{ + int err; + + err = asd_chip_hardrst(asd_ha); + if (err) { + asd_printk("couldn't hard reset %s\n", + pci_name(asd_ha->pcidev)); + goto out; + } + + asd_disable_ints(asd_ha); + + err = asd_init_seqs(asd_ha); + if (err) { + asd_printk("couldn't init seqs for %s\n", + pci_name(asd_ha->pcidev)); + goto out; + } + + err = asd_start_seqs(asd_ha); + if (err) { + asd_printk("coudln't start seqs for %s\n", + pci_name(asd_ha->pcidev)); + goto out; + } +out: + return err; +} + +#define MAX_DEVS ((OCM_MAX_SIZE) / (ASD_DDB_SIZE)) + +static int max_devs = 0; +module_param_named(max_devs, max_devs, int, S_IRUGO); +MODULE_PARM_DESC(max_devs, "\n" + "\tMaximum number of SAS devices to support (not LUs).\n" + "\tDefault: 2176, Maximum: 65663.\n"); + +static int max_cmnds = 0; +module_param_named(max_cmnds, max_cmnds, int, S_IRUGO); +MODULE_PARM_DESC(max_cmnds, "\n" + "\tMaximum number of commands queuable.\n" + "\tDefault: 512, Maximum: 66047.\n"); + +static void asd_extend_devctx_ocm(struct asd_ha_struct *asd_ha) +{ + unsigned long dma_addr = OCM_BASE_ADDR; + u32 d; + + dma_addr -= asd_ha->hw_prof.max_ddbs * ASD_DDB_SIZE; + asd_write_reg_addr(asd_ha, DEVCTXBASE, (dma_addr_t) dma_addr); + d = asd_read_reg_dword(asd_ha, CTXDOMAIN); + d |= 4; + asd_write_reg_dword(asd_ha, CTXDOMAIN, d); + asd_ha->hw_prof.max_ddbs += MAX_DEVS; +} + +static int asd_extend_devctx(struct asd_ha_struct *asd_ha) +{ + dma_addr_t dma_handle; + unsigned long dma_addr; + u32 d; + int size; + + asd_extend_devctx_ocm(asd_ha); + + asd_ha->hw_prof.ddb_ext = NULL; + if (max_devs <= asd_ha->hw_prof.max_ddbs || max_devs > 0xFFFF) { + max_devs = asd_ha->hw_prof.max_ddbs; + return 0; + } + + size = (max_devs - asd_ha->hw_prof.max_ddbs + 1) * ASD_DDB_SIZE; + + asd_ha->hw_prof.ddb_ext = asd_alloc_coherent(asd_ha, size, GFP_KERNEL); + if (!asd_ha->hw_prof.ddb_ext) { + asd_printk("couldn't allocate memory for %d devices\n", + max_devs); + max_devs = asd_ha->hw_prof.max_ddbs; + return -ENOMEM; + } + dma_handle = asd_ha->hw_prof.ddb_ext->dma_handle; + dma_addr = ALIGN((unsigned long) dma_handle, ASD_DDB_SIZE); + dma_addr -= asd_ha->hw_prof.max_ddbs * ASD_DDB_SIZE; + dma_handle = (dma_addr_t) dma_addr; + asd_write_reg_addr(asd_ha, DEVCTXBASE, dma_handle); + d = asd_read_reg_dword(asd_ha, CTXDOMAIN); + d &= ~4; + asd_write_reg_dword(asd_ha, CTXDOMAIN, d); + + asd_ha->hw_prof.max_ddbs = max_devs; + + return 0; +} + +static int asd_extend_cmdctx(struct asd_ha_struct *asd_ha) +{ + dma_addr_t dma_handle; + unsigned long dma_addr; + u32 d; + int size; + + asd_ha->hw_prof.scb_ext = NULL; + if (max_cmnds <= asd_ha->hw_prof.max_scbs || max_cmnds > 0xFFFF) { + max_cmnds = asd_ha->hw_prof.max_scbs; + return 0; + } + + size = (max_cmnds - asd_ha->hw_prof.max_scbs + 1) * ASD_SCB_SIZE; + + asd_ha->hw_prof.scb_ext = asd_alloc_coherent(asd_ha, size, GFP_KERNEL); + if (!asd_ha->hw_prof.scb_ext) { + asd_printk("couldn't allocate memory for %d commands\n", + max_cmnds); + max_cmnds = asd_ha->hw_prof.max_scbs; + return -ENOMEM; + } + dma_handle = asd_ha->hw_prof.scb_ext->dma_handle; + dma_addr = ALIGN((unsigned long) dma_handle, ASD_SCB_SIZE); + dma_addr -= asd_ha->hw_prof.max_scbs * ASD_SCB_SIZE; + dma_handle = (dma_addr_t) dma_addr; + asd_write_reg_addr(asd_ha, CMDCTXBASE, dma_handle); + d = asd_read_reg_dword(asd_ha, CTXDOMAIN); + d &= ~1; + asd_write_reg_dword(asd_ha, CTXDOMAIN, d); + + asd_ha->hw_prof.max_scbs = max_cmnds; + + return 0; +} + +/** + * asd_init_ctxmem -- initialize context memory + * asd_ha: pointer to host adapter structure + * + * This function sets the maximum number of SCBs and + * DDBs which can be used by the sequencer. This is normally + * 512 and 128 respectively. If support for more SCBs or more DDBs + * is required then CMDCTXBASE, DEVCTXBASE and CTXDOMAIN are + * initialized here to extend context memory to point to host memory, + * thus allowing unlimited support for SCBs and DDBs -- only limited + * by host memory. + */ +static int asd_init_ctxmem(struct asd_ha_struct *asd_ha) +{ + int bitmap_bytes; + + asd_get_max_scb_ddb(asd_ha); + asd_extend_devctx(asd_ha); + asd_extend_cmdctx(asd_ha); + + /* The kernel wants bitmaps to be unsigned long sized. */ + bitmap_bytes = (asd_ha->hw_prof.max_ddbs+7)/8; + bitmap_bytes = BITS_TO_LONGS(bitmap_bytes*8)*sizeof(unsigned long); + asd_ha->hw_prof.ddb_bitmap = kzalloc(bitmap_bytes, GFP_KERNEL); + if (!asd_ha->hw_prof.ddb_bitmap) + return -ENOMEM; + spin_lock_init(&asd_ha->hw_prof.ddb_lock); + + return 0; +} + +int asd_init_hw(struct asd_ha_struct *asd_ha) +{ + int err; + u32 v; + + err = asd_init_sw(asd_ha); + if (err) + return err; + + err = pci_read_config_dword(asd_ha->pcidev, PCIC_HSTPCIX_CNTRL, &v); + if (err) { + asd_printk("couldn't read PCIC_HSTPCIX_CNTRL of %s\n", + pci_name(asd_ha->pcidev)); + return err; + } + pci_write_config_dword(asd_ha->pcidev, PCIC_HSTPCIX_CNTRL, + v | SC_TMR_DIS); + if (err) { + asd_printk("couldn't disable split completion timer of %s\n", + pci_name(asd_ha->pcidev)); + return err; + } + + err = asd_read_ocm(asd_ha); + if (err) { + asd_printk("couldn't read ocm(%d)\n", err); + /* While suspicios, it is not an error that we + * couldn't read the OCM. */ + } + + err = asd_read_flash(asd_ha); + if (err) { + asd_printk("couldn't read flash(%d)\n", err); + /* While suspicios, it is not an error that we + * couldn't read FLASH memory. + */ + } + + asd_init_ctxmem(asd_ha); + + asd_get_user_sas_addr(asd_ha); + if (!asd_ha->hw_prof.sas_addr[0]) { + asd_printk("No SAS Address provided for %s\n", + pci_name(asd_ha->pcidev)); + err = -ENODEV; + goto Out; + } + + asd_propagate_sas_addr(asd_ha); + + err = asd_init_phys(asd_ha); + if (err) { + asd_printk("couldn't initialize phys for %s\n", + pci_name(asd_ha->pcidev)); + goto Out; + } + + err = asd_init_scbs(asd_ha); + if (err) { + asd_printk("couldn't initialize scbs for %s\n", + pci_name(asd_ha->pcidev)); + goto Out; + } + + err = asd_init_dl(asd_ha); + if (err) { + asd_printk("couldn't initialize the done list:%d\n", + err); + goto Out; + } + + err = asd_init_escbs(asd_ha); + if (err) { + asd_printk("couldn't initialize escbs\n"); + goto Out; + } + + err = asd_init_chip(asd_ha); + if (err) { + asd_printk("couldn't init the chip\n"); + goto Out; + } +Out: + return err; +} + +/* ---------- Chip reset ---------- */ + +/** + * asd_chip_reset -- reset the host adapter, etc + * @asd_ha: pointer to host adapter structure of interest + * + * Called from the ISR. Hard reset the chip. Let everything + * timeout. This should be no different than hot-unplugging the + * host adapter. Once everything times out we'll init the chip with + * a call to asd_init_chip() and enable interrupts with asd_enable_ints(). + * XXX finish. + */ +static void asd_chip_reset(struct asd_ha_struct *asd_ha) +{ + struct sas_ha_struct *sas_ha = &asd_ha->sas_ha; + + ASD_DPRINTK("chip reset for %s\n", pci_name(asd_ha->pcidev)); + asd_chip_hardrst(asd_ha); + sas_ha->notify_ha_event(sas_ha, HAE_RESET); +} + +/* ---------- Done List Routines ---------- */ + +static void asd_dl_tasklet_handler(unsigned long data) +{ + struct asd_ha_struct *asd_ha = (struct asd_ha_struct *) data; + struct asd_seq_data *seq = &asd_ha->seq; + unsigned long flags; + + while (1) { + struct done_list_struct *dl = &seq->dl[seq->dl_next]; + struct asd_ascb *ascb; + + if ((dl->toggle & DL_TOGGLE_MASK) != seq->dl_toggle) + break; + + /* find the aSCB */ + spin_lock_irqsave(&seq->tc_index_lock, flags); + ascb = asd_tc_index_find(seq, (int)le16_to_cpu(dl->index)); + spin_unlock_irqrestore(&seq->tc_index_lock, flags); + if (unlikely(!ascb)) { + ASD_DPRINTK("BUG:sequencer:dl:no ascb?!\n"); + goto next_1; + } else if (ascb->scb->header.opcode == EMPTY_SCB) { + goto out; + } else if (!ascb->uldd_timer && !del_timer(&ascb->timer)) { + goto next_1; + } + spin_lock_irqsave(&seq->pend_q_lock, flags); + list_del_init(&ascb->list); + seq->pending--; + spin_unlock_irqrestore(&seq->pend_q_lock, flags); + out: + ascb->tasklet_complete(ascb, dl); + + next_1: + seq->dl_next = (seq->dl_next + 1) & (ASD_DL_SIZE-1); + if (!seq->dl_next) + seq->dl_toggle ^= DL_TOGGLE_MASK; + } +} + +/* ---------- Interrupt Service Routines ---------- */ + +/** + * asd_process_donelist_isr -- schedule processing of done list entries + * @asd_ha: pointer to host adapter structure + */ +static inline void asd_process_donelist_isr(struct asd_ha_struct *asd_ha) +{ + tasklet_schedule(&asd_ha->seq.dl_tasklet); +} + +/** + * asd_com_sas_isr -- process device communication interrupt (COMINT) + * @asd_ha: pointer to host adapter structure + */ +static inline void asd_com_sas_isr(struct asd_ha_struct *asd_ha) +{ + u32 comstat = asd_read_reg_dword(asd_ha, COMSTAT); + + /* clear COMSTAT int */ + asd_write_reg_dword(asd_ha, COMSTAT, 0xFFFFFFFF); + + if (comstat & CSBUFPERR) { + asd_printk("%s: command/status buffer dma parity error\n", + pci_name(asd_ha->pcidev)); + } else if (comstat & CSERR) { + int i; + u32 dmaerr = asd_read_reg_dword(asd_ha, DMAERR); + dmaerr &= 0xFF; + asd_printk("%s: command/status dma error, DMAERR: 0x%02x, " + "CSDMAADR: 0x%04x, CSDMAADR+4: 0x%04x\n", + pci_name(asd_ha->pcidev), + dmaerr, + asd_read_reg_dword(asd_ha, CSDMAADR), + asd_read_reg_dword(asd_ha, CSDMAADR+4)); + asd_printk("CSBUFFER:\n"); + for (i = 0; i < 8; i++) { + asd_printk("%08x %08x %08x %08x\n", + asd_read_reg_dword(asd_ha, CSBUFFER), + asd_read_reg_dword(asd_ha, CSBUFFER+4), + asd_read_reg_dword(asd_ha, CSBUFFER+8), + asd_read_reg_dword(asd_ha, CSBUFFER+12)); + } + asd_dump_seq_state(asd_ha, 0); + } else if (comstat & OVLYERR) { + u32 dmaerr = asd_read_reg_dword(asd_ha, DMAERR); + dmaerr = (dmaerr >> 8) & 0xFF; + asd_printk("%s: overlay dma error:0x%x\n", + pci_name(asd_ha->pcidev), + dmaerr); + } + asd_chip_reset(asd_ha); +} + +static inline void asd_arp2_err(struct asd_ha_struct *asd_ha, u32 dchstatus) +{ + static const char *halt_code[256] = { + "UNEXPECTED_INTERRUPT0", + "UNEXPECTED_INTERRUPT1", + "UNEXPECTED_INTERRUPT2", + "UNEXPECTED_INTERRUPT3", + "UNEXPECTED_INTERRUPT4", + "UNEXPECTED_INTERRUPT5", + "UNEXPECTED_INTERRUPT6", + "UNEXPECTED_INTERRUPT7", + "UNEXPECTED_INTERRUPT8", + "UNEXPECTED_INTERRUPT9", + "UNEXPECTED_INTERRUPT10", + [11 ... 19] = "unknown[11,19]", + "NO_FREE_SCB_AVAILABLE", + "INVALID_SCB_OPCODE", + "INVALID_MBX_OPCODE", + "INVALID_ATA_STATE", + "ATA_QUEUE_FULL", + "ATA_TAG_TABLE_FAULT", + "ATA_TAG_MASK_FAULT", + "BAD_LINK_QUEUE_STATE", + "DMA2CHIM_QUEUE_ERROR", + "EMPTY_SCB_LIST_FULL", + "unknown[30]", + "IN_USE_SCB_ON_FREE_LIST", + "BAD_OPEN_WAIT_STATE", + "INVALID_STP_AFFILIATION", + "unknown[34]", + "EXEC_QUEUE_ERROR", + "TOO_MANY_EMPTIES_NEEDED", + "EMPTY_REQ_QUEUE_ERROR", + "Q_MONIRTT_MGMT_ERROR", + "TARGET_MODE_FLOW_ERROR", + "DEVICE_QUEUE_NOT_FOUND", + "START_IRTT_TIMER_ERROR", + "ABORT_TASK_ILLEGAL_REQ", + [43 ... 255] = "unknown[43,255]" + }; + + if (dchstatus & CSEQINT) { + u32 arp2int = asd_read_reg_dword(asd_ha, CARP2INT); + + if (arp2int & (ARP2WAITTO|ARP2ILLOPC|ARP2PERR|ARP2CIOPERR)) { + asd_printk("%s: CSEQ arp2int:0x%x\n", + pci_name(asd_ha->pcidev), + arp2int); + } else if (arp2int & ARP2HALTC) + asd_printk("%s: CSEQ halted: %s\n", + pci_name(asd_ha->pcidev), + halt_code[(arp2int>>16)&0xFF]); + else + asd_printk("%s: CARP2INT:0x%x\n", + pci_name(asd_ha->pcidev), + arp2int); + } + if (dchstatus & LSEQINT_MASK) { + int lseq; + u8 lseq_mask = dchstatus & LSEQINT_MASK; + + for_each_sequencer(lseq_mask, lseq_mask, lseq) { + u32 arp2int = asd_read_reg_dword(asd_ha, + LmARP2INT(lseq)); + if (arp2int & (ARP2WAITTO | ARP2ILLOPC | ARP2PERR + | ARP2CIOPERR)) { + asd_printk("%s: LSEQ%d arp2int:0x%x\n", + pci_name(asd_ha->pcidev), + lseq, arp2int); + /* XXX we should only do lseq reset */ + } else if (arp2int & ARP2HALTC) + asd_printk("%s: LSEQ%d halted: %s\n", + pci_name(asd_ha->pcidev), + lseq,halt_code[(arp2int>>16)&0xFF]); + else + asd_printk("%s: LSEQ%d ARP2INT:0x%x\n", + pci_name(asd_ha->pcidev), lseq, + arp2int); + } + } + asd_chip_reset(asd_ha); +} + +/** + * asd_dch_sas_isr -- process device channel interrupt (DEVINT) + * @asd_ha: pointer to host adapter structure + */ +static inline void asd_dch_sas_isr(struct asd_ha_struct *asd_ha) +{ + u32 dchstatus = asd_read_reg_dword(asd_ha, DCHSTATUS); + + if (dchstatus & CFIFTOERR) { + asd_printk("%s: CFIFTOERR\n", pci_name(asd_ha->pcidev)); + asd_chip_reset(asd_ha); + } else + asd_arp2_err(asd_ha, dchstatus); +} + +/** + * ads_rbi_exsi_isr -- process external system interface interrupt (INITERR) + * @asd_ha: pointer to host adapter structure + */ +static inline void asd_rbi_exsi_isr(struct asd_ha_struct *asd_ha) +{ + u32 stat0r = asd_read_reg_dword(asd_ha, ASISTAT0R); + + if (!(stat0r & ASIERR)) { + asd_printk("hmm, EXSI interrupted but no error?\n"); + return; + } + + if (stat0r & ASIFMTERR) { + asd_printk("ASI SEEPROM format error for %s\n", + pci_name(asd_ha->pcidev)); + } else if (stat0r & ASISEECHKERR) { + u32 stat1r = asd_read_reg_dword(asd_ha, ASISTAT1R); + asd_printk("ASI SEEPROM checksum 0x%x error for %s\n", + stat1r & CHECKSUM_MASK, + pci_name(asd_ha->pcidev)); + } else { + u32 statr = asd_read_reg_dword(asd_ha, ASIERRSTATR); + + if (!(statr & CPI2ASIMSTERR_MASK)) { + ASD_DPRINTK("hmm, ASIERR?\n"); + return; + } else { + u32 addr = asd_read_reg_dword(asd_ha, ASIERRADDR); + u32 data = asd_read_reg_dword(asd_ha, ASIERRDATAR); + + asd_printk("%s: CPI2 xfer err: addr: 0x%x, wdata: 0x%x, " + "count: 0x%x, byteen: 0x%x, targerr: 0x%x " + "master id: 0x%x, master err: 0x%x\n", + pci_name(asd_ha->pcidev), + addr, data, + (statr & CPI2ASIBYTECNT_MASK) >> 16, + (statr & CPI2ASIBYTEEN_MASK) >> 12, + (statr & CPI2ASITARGERR_MASK) >> 8, + (statr & CPI2ASITARGMID_MASK) >> 4, + (statr & CPI2ASIMSTERR_MASK)); + } + } + asd_chip_reset(asd_ha); +} + +/** + * asd_hst_pcix_isr -- process host interface interrupts + * @asd_ha: pointer to host adapter structure + * + * Asserted on PCIX errors: target abort, etc. + */ +static inline void asd_hst_pcix_isr(struct asd_ha_struct *asd_ha) +{ + u16 status; + u32 pcix_status; + u32 ecc_status; + + pci_read_config_word(asd_ha->pcidev, PCI_STATUS, &status); + pci_read_config_dword(asd_ha->pcidev, PCIX_STATUS, &pcix_status); + pci_read_config_dword(asd_ha->pcidev, ECC_CTRL_STAT, &ecc_status); + + if (status & PCI_STATUS_DETECTED_PARITY) + asd_printk("parity error for %s\n", pci_name(asd_ha->pcidev)); + else if (status & PCI_STATUS_REC_MASTER_ABORT) + asd_printk("master abort for %s\n", pci_name(asd_ha->pcidev)); + else if (status & PCI_STATUS_REC_TARGET_ABORT) + asd_printk("target abort for %s\n", pci_name(asd_ha->pcidev)); + else if (status & PCI_STATUS_PARITY) + asd_printk("data parity for %s\n", pci_name(asd_ha->pcidev)); + else if (pcix_status & RCV_SCE) { + asd_printk("received split completion error for %s\n", + pci_name(asd_ha->pcidev)); + pci_write_config_dword(asd_ha->pcidev,PCIX_STATUS,pcix_status); + /* XXX: Abort task? */ + return; + } else if (pcix_status & UNEXP_SC) { + asd_printk("unexpected split completion for %s\n", + pci_name(asd_ha->pcidev)); + pci_write_config_dword(asd_ha->pcidev,PCIX_STATUS,pcix_status); + /* ignore */ + return; + } else if (pcix_status & SC_DISCARD) + asd_printk("split completion discarded for %s\n", + pci_name(asd_ha->pcidev)); + else if (ecc_status & UNCOR_ECCERR) + asd_printk("uncorrectable ECC error for %s\n", + pci_name(asd_ha->pcidev)); + asd_chip_reset(asd_ha); +} + +/** + * asd_hw_isr -- host adapter interrupt service routine + * @irq: ignored + * @dev_id: pointer to host adapter structure + * @regs: ignored + * + * The ISR processes done list entries and level 3 error handling. + */ +irqreturn_t asd_hw_isr(int irq, void *dev_id, struct pt_regs *regs) +{ + struct asd_ha_struct *asd_ha = dev_id; + u32 chimint = asd_read_reg_dword(asd_ha, CHIMINT); + + if (!chimint) + return IRQ_NONE; + + asd_write_reg_dword(asd_ha, CHIMINT, chimint); + (void) asd_read_reg_dword(asd_ha, CHIMINT); + + if (chimint & DLAVAIL) + asd_process_donelist_isr(asd_ha); + if (chimint & COMINT) + asd_com_sas_isr(asd_ha); + if (chimint & DEVINT) + asd_dch_sas_isr(asd_ha); + if (chimint & INITERR) + asd_rbi_exsi_isr(asd_ha); + if (chimint & HOSTERR) + asd_hst_pcix_isr(asd_ha); + + return IRQ_HANDLED; +} + +/* ---------- SCB handling ---------- */ + +static inline struct asd_ascb *asd_ascb_alloc(struct asd_ha_struct *asd_ha, + gfp_t gfp_flags) +{ + extern kmem_cache_t *asd_ascb_cache; + struct asd_seq_data *seq = &asd_ha->seq; + struct asd_ascb *ascb; + unsigned long flags; + + ascb = kmem_cache_alloc(asd_ascb_cache, gfp_flags); + + if (ascb) { + memset(ascb, 0, sizeof(*ascb)); + ascb->dma_scb.size = sizeof(struct scb); + ascb->dma_scb.vaddr = dma_pool_alloc(asd_ha->scb_pool, + gfp_flags, + &ascb->dma_scb.dma_handle); + if (!ascb->dma_scb.vaddr) { + kmem_cache_free(asd_ascb_cache, ascb); + return NULL; + } + memset(ascb->dma_scb.vaddr, 0, sizeof(struct scb)); + asd_init_ascb(asd_ha, ascb); + + spin_lock_irqsave(&seq->tc_index_lock, flags); + ascb->tc_index = asd_tc_index_get(seq, ascb); + spin_unlock_irqrestore(&seq->tc_index_lock, flags); + if (ascb->tc_index == -1) + goto undo; + + ascb->scb->header.index = cpu_to_le16((u16)ascb->tc_index); + } + + return ascb; +undo: + dma_pool_free(asd_ha->scb_pool, ascb->dma_scb.vaddr, + ascb->dma_scb.dma_handle); + kmem_cache_free(asd_ascb_cache, ascb); + ASD_DPRINTK("no index for ascb\n"); + return NULL; +} + +/** + * asd_ascb_alloc_list -- allocate a list of aSCBs + * @asd_ha: pointer to host adapter structure + * @num: pointer to integer number of aSCBs + * @gfp_flags: GFP_ flags. + * + * This is the only function which is used to allocate aSCBs. + * It can allocate one or many. If more than one, then they form + * a linked list in two ways: by their list field of the ascb struct + * and by the next_scb field of the scb_header. + * + * Returns NULL if no memory was available, else pointer to a list + * of ascbs. When this function returns, @num would be the number + * of SCBs which were not able to be allocated, 0 if all requested + * were able to be allocated. + */ +struct asd_ascb *asd_ascb_alloc_list(struct asd_ha_struct + *asd_ha, int *num, + gfp_t gfp_flags) +{ + struct asd_ascb *first = NULL; + + for ( ; *num > 0; --*num) { + struct asd_ascb *ascb = asd_ascb_alloc(asd_ha, gfp_flags); + + if (!ascb) + break; + else if (!first) + first = ascb; + else { + struct asd_ascb *last = list_entry(first->list.prev, + struct asd_ascb, + list); + list_add_tail(&ascb->list, &first->list); + last->scb->header.next_scb = + cpu_to_le64(((u64)ascb->dma_scb.dma_handle)); + } + } + + return first; +} + +/** + * asd_swap_head_scb -- swap the head scb + * @asd_ha: pointer to host adapter structure + * @ascb: pointer to the head of an ascb list + * + * The sequencer knows the DMA address of the next SCB to be DMAed to + * the host adapter, from initialization or from the last list DMAed. + * seq->next_scb keeps the address of this SCB. The sequencer will + * DMA to the host adapter this list of SCBs. But the head (first + * element) of this list is not known to the sequencer. Here we swap + * the head of the list with the known SCB (memcpy()). + * Only one memcpy() is required per list so it is in our interest + * to keep the list of SCB as long as possible so that the ratio + * of number of memcpy calls to the number of SCB DMA-ed is as small + * as possible. + * + * LOCKING: called with the pending list lock held. + */ +static inline void asd_swap_head_scb(struct asd_ha_struct *asd_ha, + struct asd_ascb *ascb) +{ + struct asd_seq_data *seq = &asd_ha->seq; + struct asd_ascb *last = list_entry(ascb->list.prev, + struct asd_ascb, + list); + struct asd_dma_tok t = ascb->dma_scb; + + memcpy(seq->next_scb.vaddr, ascb->scb, sizeof(*ascb->scb)); + ascb->dma_scb = seq->next_scb; + ascb->scb = ascb->dma_scb.vaddr; + seq->next_scb = t; + last->scb->header.next_scb = + cpu_to_le64(((u64)seq->next_scb.dma_handle)); +} + +/** + * asd_start_timers -- (add and) start timers of SCBs + * @list: pointer to struct list_head of the scbs + * @to: timeout in jiffies + * + * If an SCB in the @list has no timer function, assign the default + * one, then start the timer of the SCB. This function is + * intended to be called from asd_post_ascb_list(), just prior to + * posting the SCBs to the sequencer. + */ +static inline void asd_start_scb_timers(struct list_head *list) +{ + struct asd_ascb *ascb; + list_for_each_entry(ascb, list, list) { + if (!ascb->uldd_timer) { + ascb->timer.data = (unsigned long) ascb; + ascb->timer.function = asd_ascb_timedout; + ascb->timer.expires = jiffies + AIC94XX_SCB_TIMEOUT; + add_timer(&ascb->timer); + } + } +} + +/** + * asd_post_ascb_list -- post a list of 1 or more aSCBs to the host adapter + * @asd_ha: pointer to a host adapter structure + * @ascb: pointer to the first aSCB in the list + * @num: number of aSCBs in the list (to be posted) + * + * See queueing comment in asd_post_escb_list(). + * + * Additional note on queuing: In order to minimize the ratio of memcpy() + * to the number of ascbs sent, we try to batch-send as many ascbs as possible + * in one go. + * Two cases are possible: + * A) can_queue >= num, + * B) can_queue < num. + * Case A: we can send the whole batch at once. Increment "pending" + * in the beginning of this function, when it is checked, in order to + * eliminate races when this function is called by multiple processes. + * Case B: should never happen if the managing layer considers + * lldd_queue_size. + */ +int asd_post_ascb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb, + int num) +{ + unsigned long flags; + LIST_HEAD(list); + int can_queue; + + spin_lock_irqsave(&asd_ha->seq.pend_q_lock, flags); + can_queue = asd_ha->hw_prof.max_scbs - asd_ha->seq.pending; + if (can_queue >= num) + asd_ha->seq.pending += num; + else + can_queue = 0; + + if (!can_queue) { + spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags); + asd_printk("%s: scb queue full\n", pci_name(asd_ha->pcidev)); + return -SAS_QUEUE_FULL; + } + + asd_swap_head_scb(asd_ha, ascb); + + __list_add(&list, ascb->list.prev, &ascb->list); + + asd_start_scb_timers(&list); + + asd_ha->seq.scbpro += num; + list_splice_init(&list, asd_ha->seq.pend_q.prev); + asd_write_reg_dword(asd_ha, SCBPRO, (u32)asd_ha->seq.scbpro); + spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags); + + return 0; +} + +/** + * asd_post_escb_list -- post a list of 1 or more empty scb + * @asd_ha: pointer to a host adapter structure + * @ascb: pointer to the first empty SCB in the list + * @num: number of aSCBs in the list (to be posted) + * + * This is essentially the same as asd_post_ascb_list, but we do not + * increment pending, add those to the pending list or get indexes. + * See asd_init_escbs() and asd_init_post_escbs(). + * + * Since sending a list of ascbs is a superset of sending a single + * ascb, this function exists to generalize this. More specifically, + * when sending a list of those, we want to do only a _single_ + * memcpy() at swap head, as opposed to for each ascb sent (in the + * case of sending them one by one). That is, we want to minimize the + * ratio of memcpy() operations to the number of ascbs sent. The same + * logic applies to asd_post_ascb_list(). + */ +int asd_post_escb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb, + int num) +{ + unsigned long flags; + + spin_lock_irqsave(&asd_ha->seq.pend_q_lock, flags); + asd_swap_head_scb(asd_ha, ascb); + asd_ha->seq.scbpro += num; + asd_write_reg_dword(asd_ha, SCBPRO, (u32)asd_ha->seq.scbpro); + spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags); + + return 0; +} + +/* ---------- LED ---------- */ + +/** + * asd_turn_led -- turn on/off an LED + * @asd_ha: pointer to host adapter structure + * @phy_id: the PHY id whose LED we want to manupulate + * @op: 1 to turn on, 0 to turn off + */ +void asd_turn_led(struct asd_ha_struct *asd_ha, int phy_id, int op) +{ + if (phy_id < ASD_MAX_PHYS) { + u32 v = asd_read_reg_dword(asd_ha, LmCONTROL(phy_id)); + if (op) + v |= LEDPOL; + else + v &= ~LEDPOL; + asd_write_reg_dword(asd_ha, LmCONTROL(phy_id), v); + } +} + +/** + * asd_control_led -- enable/disable an LED on the board + * @asd_ha: pointer to host adapter structure + * @phy_id: integer, the phy id + * @op: integer, 1 to enable, 0 to disable the LED + * + * First we output enable the LED, then we set the source + * to be an external module. + */ +void asd_control_led(struct asd_ha_struct *asd_ha, int phy_id, int op) +{ + if (phy_id < ASD_MAX_PHYS) { + u32 v; + + v = asd_read_reg_dword(asd_ha, GPIOOER); + if (op) + v |= (1 << phy_id); + else + v &= ~(1 << phy_id); + asd_write_reg_dword(asd_ha, GPIOOER, v); + + v = asd_read_reg_dword(asd_ha, GPIOCNFGR); + if (op) + v |= (1 << phy_id); + else + v &= ~(1 << phy_id); + asd_write_reg_dword(asd_ha, GPIOCNFGR, v); + } +} + +/* ---------- PHY enable ---------- */ + +static int asd_enable_phy(struct asd_ha_struct *asd_ha, int phy_id) +{ + struct asd_phy *phy = &asd_ha->phys[phy_id]; + + asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, INT_ENABLE_2), 0); + asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, HOT_PLUG_DELAY), + HOTPLUG_DELAY_TIMEOUT); + + /* Get defaults from manuf. sector */ + /* XXX we need defaults for those in case MS is broken. */ + asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, PHY_CONTROL_0), + phy->phy_desc->phy_control_0); + asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, PHY_CONTROL_1), + phy->phy_desc->phy_control_1); + asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, PHY_CONTROL_2), + phy->phy_desc->phy_control_2); + asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, PHY_CONTROL_3), + phy->phy_desc->phy_control_3); + + asd_write_reg_dword(asd_ha, LmSEQ_TEN_MS_COMINIT_TIMEOUT(phy_id), + ASD_COMINIT_TIMEOUT); + + asd_write_reg_addr(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(phy_id), + phy->id_frm_tok->dma_handle); + + asd_control_led(asd_ha, phy_id, 1); + + return 0; +} + +int asd_enable_phys(struct asd_ha_struct *asd_ha, const u8 phy_mask) +{ + u8 phy_m; + u8 i; + int num = 0, k; + struct asd_ascb *ascb; + struct asd_ascb *ascb_list; + + if (!phy_mask) { + asd_printk("%s called with phy_mask of 0!?\n", __FUNCTION__); + return 0; + } + + for_each_phy(phy_mask, phy_m, i) { + num++; + asd_enable_phy(asd_ha, i); + } + + k = num; + ascb_list = asd_ascb_alloc_list(asd_ha, &k, GFP_KERNEL); + if (!ascb_list) { + asd_printk("no memory for control phy ascb list\n"); + return -ENOMEM; + } + num -= k; + + ascb = ascb_list; + for_each_phy(phy_mask, phy_m, i) { + asd_build_control_phy(ascb, i, ENABLE_PHY); + ascb = list_entry(ascb->list.next, struct asd_ascb, list); + } + ASD_DPRINTK("posting %d control phy scbs\n", num); + k = asd_post_ascb_list(asd_ha, ascb_list, num); + if (k) + asd_ascb_free_list(ascb_list); + + return k; +} diff --git a/drivers/scsi/aic94xx/aic94xx_hwi.h b/drivers/scsi/aic94xx/aic94xx_hwi.h new file mode 100644 index 00000000000..8498144aa5e --- /dev/null +++ b/drivers/scsi/aic94xx/aic94xx_hwi.h @@ -0,0 +1,397 @@ +/* + * Aic94xx SAS/SATA driver hardware interface header file. + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This file is part of the aic94xx driver. + * + * The aic94xx driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * The aic94xx driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the aic94xx driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#ifndef _AIC94XX_HWI_H_ +#define _AIC94XX_HWI_H_ + +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> + +#include <scsi/libsas.h> + +#include "aic94xx.h" +#include "aic94xx_sas.h" + +/* Define ASD_MAX_PHYS to the maximum phys ever. Currently 8. */ +#define ASD_MAX_PHYS 8 +#define ASD_PCBA_SN_SIZE 12 + +/* Those are to be further named properly, the "RAZORx" part, and + * subsequently included in include/linux/pci_ids.h. + */ +#define PCI_DEVICE_ID_ADAPTEC2_RAZOR10 0x410 +#define PCI_DEVICE_ID_ADAPTEC2_RAZOR12 0x412 +#define PCI_DEVICE_ID_ADAPTEC2_RAZOR1E 0x41E +#define PCI_DEVICE_ID_ADAPTEC2_RAZOR30 0x430 +#define PCI_DEVICE_ID_ADAPTEC2_RAZOR32 0x432 +#define PCI_DEVICE_ID_ADAPTEC2_RAZOR3E 0x43E +#define PCI_DEVICE_ID_ADAPTEC2_RAZOR3F 0x43F + +struct asd_ha_addrspace { + void __iomem *addr; + unsigned long start; /* pci resource start */ + unsigned long len; /* pci resource len */ + unsigned long flags; /* pci resource flags */ + + /* addresses internal to the host adapter */ + u32 swa_base; /* mmspace 1 (MBAR1) uses this only */ + u32 swb_base; + u32 swc_base; +}; + +struct bios_struct { + int present; + u8 maj; + u8 min; + u32 bld; +}; + +struct unit_element_struct { + u16 num; + u16 size; + void *area; +}; + +struct flash_struct { + u32 bar; + int present; + int wide; + u8 manuf; + u8 dev_id; + u8 sec_prot; + + u32 dir_offs; +}; + +struct asd_phy_desc { + /* From CTRL-A settings, then set to what is appropriate */ + u8 sas_addr[SAS_ADDR_SIZE]; + u8 max_sas_lrate; + u8 min_sas_lrate; + u8 max_sata_lrate; + u8 min_sata_lrate; + u8 flags; +#define ASD_CRC_DIS 1 +#define ASD_SATA_SPINUP_HOLD 2 + + u8 phy_control_0; /* mode 5 reg 0x160 */ + u8 phy_control_1; /* mode 5 reg 0x161 */ + u8 phy_control_2; /* mode 5 reg 0x162 */ + u8 phy_control_3; /* mode 5 reg 0x163 */ +}; + +struct asd_dma_tok { + void *vaddr; + dma_addr_t dma_handle; + size_t size; +}; + +struct hw_profile { + struct bios_struct bios; + struct unit_element_struct ue; + struct flash_struct flash; + + u8 sas_addr[SAS_ADDR_SIZE]; + char pcba_sn[ASD_PCBA_SN_SIZE+1]; + + u8 enabled_phys; /* mask of enabled phys */ + struct asd_phy_desc phy_desc[ASD_MAX_PHYS]; + u32 max_scbs; /* absolute sequencer scb queue size */ + struct asd_dma_tok *scb_ext; + u32 max_ddbs; + struct asd_dma_tok *ddb_ext; + + spinlock_t ddb_lock; + void *ddb_bitmap; + + int num_phys; /* ENABLEABLE */ + int max_phys; /* REPORTED + ENABLEABLE */ + + unsigned addr_range; /* max # of addrs; max # of possible ports */ + unsigned port_name_base; + unsigned dev_name_base; + unsigned sata_name_base; +}; + +struct asd_ascb { + struct list_head list; + struct asd_ha_struct *ha; + + struct scb *scb; /* equals dma_scb->vaddr */ + struct asd_dma_tok dma_scb; + struct asd_dma_tok *sg_arr; + + void (*tasklet_complete)(struct asd_ascb *, struct done_list_struct *); + u8 uldd_timer:1; + + /* internally generated command */ + struct timer_list timer; + struct completion completion; + u8 tag_valid:1; + __be16 tag; /* error recovery only */ + + /* If this is an Empty SCB, index of first edb in seq->edb_arr. */ + int edb_index; + + /* Used by the timer timeout function. */ + int tc_index; + + void *uldd_task; +}; + +#define ASD_DL_SIZE_BITS 0x8 +#define ASD_DL_SIZE (1<<(2+ASD_DL_SIZE_BITS)) +#define ASD_DEF_DL_TOGGLE 0x01 + +struct asd_seq_data { + spinlock_t pend_q_lock; + u16 scbpro; + int pending; + struct list_head pend_q; + int can_queue; /* per adapter */ + struct asd_dma_tok next_scb; /* next scb to be delivered to CSEQ */ + + spinlock_t tc_index_lock; + void **tc_index_array; + void *tc_index_bitmap; + int tc_index_bitmap_bits; + + struct tasklet_struct dl_tasklet; + struct done_list_struct *dl; /* array of done list entries, equals */ + struct asd_dma_tok *actual_dl; /* actual_dl->vaddr */ + int dl_toggle; + int dl_next; + + int num_edbs; + struct asd_dma_tok **edb_arr; + int num_escbs; + struct asd_ascb **escb_arr; /* array of pointers to escbs */ +}; + +/* This is the Host Adapter structure. It describes the hardware + * SAS adapter. + */ +struct asd_ha_struct { + struct pci_dev *pcidev; + const char *name; + + struct sas_ha_struct sas_ha; + + u8 revision_id; + + int iospace; + spinlock_t iolock; + struct asd_ha_addrspace io_handle[2]; + + struct hw_profile hw_prof; + + struct asd_phy phys[ASD_MAX_PHYS]; + struct asd_sas_port ports[ASD_MAX_PHYS]; + + struct dma_pool *scb_pool; + + struct asd_seq_data seq; /* sequencer related */ +}; + +/* ---------- Common macros ---------- */ + +#define ASD_BUSADDR_LO(__dma_handle) ((u32)(__dma_handle)) +#define ASD_BUSADDR_HI(__dma_handle) (((sizeof(dma_addr_t))==8) \ + ? ((u32)((__dma_handle) >> 32)) \ + : ((u32)0)) + +#define dev_to_asd_ha(__dev) pci_get_drvdata(to_pci_dev(__dev)) +#define SCB_SITE_VALID(__site_no) (((__site_no) & 0xF0FF) != 0x00FF \ + && ((__site_no) & 0xF0FF) > 0x001F) +/* For each bit set in __lseq_mask, set __lseq to equal the bit + * position of the set bit and execute the statement following. + * __mc is the temporary mask, used as a mask "counter". + */ +#define for_each_sequencer(__lseq_mask, __mc, __lseq) \ + for ((__mc)=(__lseq_mask),(__lseq)=0;(__mc)!=0;(__lseq++),(__mc)>>=1)\ + if (((__mc) & 1)) +#define for_each_phy(__lseq_mask, __mc, __lseq) \ + for ((__mc)=(__lseq_mask),(__lseq)=0;(__mc)!=0;(__lseq++),(__mc)>>=1)\ + if (((__mc) & 1)) + +#define PHY_ENABLED(_HA, _I) ((_HA)->hw_prof.enabled_phys & (1<<(_I))) + +/* ---------- DMA allocs ---------- */ + +static inline struct asd_dma_tok *asd_dmatok_alloc(gfp_t flags) +{ + return kmem_cache_alloc(asd_dma_token_cache, flags); +} + +static inline void asd_dmatok_free(struct asd_dma_tok *token) +{ + kmem_cache_free(asd_dma_token_cache, token); +} + +static inline struct asd_dma_tok *asd_alloc_coherent(struct asd_ha_struct * + asd_ha, size_t size, + gfp_t flags) +{ + struct asd_dma_tok *token = asd_dmatok_alloc(flags); + if (token) { + token->size = size; + token->vaddr = dma_alloc_coherent(&asd_ha->pcidev->dev, + token->size, + &token->dma_handle, + flags); + if (!token->vaddr) { + asd_dmatok_free(token); + token = NULL; + } + } + return token; +} + +static inline void asd_free_coherent(struct asd_ha_struct *asd_ha, + struct asd_dma_tok *token) +{ + if (token) { + dma_free_coherent(&asd_ha->pcidev->dev, token->size, + token->vaddr, token->dma_handle); + asd_dmatok_free(token); + } +} + +static inline void asd_init_ascb(struct asd_ha_struct *asd_ha, + struct asd_ascb *ascb) +{ + INIT_LIST_HEAD(&ascb->list); + ascb->scb = ascb->dma_scb.vaddr; + ascb->ha = asd_ha; + ascb->timer.function = NULL; + init_timer(&ascb->timer); + ascb->tc_index = -1; + init_completion(&ascb->completion); +} + +/* Must be called with the tc_index_lock held! + */ +static inline void asd_tc_index_release(struct asd_seq_data *seq, int index) +{ + seq->tc_index_array[index] = NULL; + clear_bit(index, seq->tc_index_bitmap); +} + +/* Must be called with the tc_index_lock held! + */ +static inline int asd_tc_index_get(struct asd_seq_data *seq, void *ptr) +{ + int index; + + index = find_first_zero_bit(seq->tc_index_bitmap, + seq->tc_index_bitmap_bits); + if (index == seq->tc_index_bitmap_bits) + return -1; + + seq->tc_index_array[index] = ptr; + set_bit(index, seq->tc_index_bitmap); + + return index; +} + +/* Must be called with the tc_index_lock held! + */ +static inline void *asd_tc_index_find(struct asd_seq_data *seq, int index) +{ + return seq->tc_index_array[index]; +} + +/** + * asd_ascb_free -- free a single aSCB after is has completed + * @ascb: pointer to the aSCB of interest + * + * This frees an aSCB after it has been executed/completed by + * the sequencer. + */ +static inline void asd_ascb_free(struct asd_ascb *ascb) +{ + if (ascb) { + struct asd_ha_struct *asd_ha = ascb->ha; + unsigned long flags; + + BUG_ON(!list_empty(&ascb->list)); + spin_lock_irqsave(&ascb->ha->seq.tc_index_lock, flags); + asd_tc_index_release(&ascb->ha->seq, ascb->tc_index); + spin_unlock_irqrestore(&ascb->ha->seq.tc_index_lock, flags); + dma_pool_free(asd_ha->scb_pool, ascb->dma_scb.vaddr, + ascb->dma_scb.dma_handle); + kmem_cache_free(asd_ascb_cache, ascb); + } +} + +/** + * asd_ascb_list_free -- free a list of ascbs + * @ascb_list: a list of ascbs + * + * This function will free a list of ascbs allocated by asd_ascb_alloc_list. + * It is used when say the scb queueing function returned QUEUE_FULL, + * and we do not need the ascbs any more. + */ +static inline void asd_ascb_free_list(struct asd_ascb *ascb_list) +{ + LIST_HEAD(list); + struct list_head *n, *pos; + + __list_add(&list, ascb_list->list.prev, &ascb_list->list); + list_for_each_safe(pos, n, &list) { + list_del_init(pos); + asd_ascb_free(list_entry(pos, struct asd_ascb, list)); + } +} + +/* ---------- Function declarations ---------- */ + +int asd_init_hw(struct asd_ha_struct *asd_ha); +irqreturn_t asd_hw_isr(int irq, void *dev_id, struct pt_regs *regs); + + +struct asd_ascb *asd_ascb_alloc_list(struct asd_ha_struct + *asd_ha, int *num, + gfp_t gfp_mask); + +int asd_post_ascb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb, + int num); +int asd_post_escb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb, + int num); + +int asd_init_post_escbs(struct asd_ha_struct *asd_ha); +void asd_build_control_phy(struct asd_ascb *ascb, int phy_id, u8 subfunc); +void asd_control_led(struct asd_ha_struct *asd_ha, int phy_id, int op); +void asd_turn_led(struct asd_ha_struct *asd_ha, int phy_id, int op); +int asd_enable_phys(struct asd_ha_struct *asd_ha, const u8 phy_mask); +void asd_build_initiate_link_adm_task(struct asd_ascb *ascb, int phy_id, + u8 subfunc); + +void asd_ascb_timedout(unsigned long data); +int asd_chip_hardrst(struct asd_ha_struct *asd_ha); + +#endif diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c new file mode 100644 index 00000000000..ee2ccad7048 --- /dev/null +++ b/drivers/scsi/aic94xx/aic94xx_init.c @@ -0,0 +1,866 @@ +/* + * Aic94xx SAS/SATA driver initialization. + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This file is part of the aic94xx driver. + * + * The aic94xx driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * The aic94xx driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the aic94xx driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> + +#include <scsi/scsi_host.h> + +#include "aic94xx.h" +#include "aic94xx_reg.h" +#include "aic94xx_hwi.h" +#include "aic94xx_seq.h" + +/* The format is "version.release.patchlevel" */ +#define ASD_DRIVER_VERSION "1.0.2" + +static int use_msi = 0; +module_param_named(use_msi, use_msi, int, S_IRUGO); +MODULE_PARM_DESC(use_msi, "\n" + "\tEnable(1) or disable(0) using PCI MSI.\n" + "\tDefault: 0"); + +static int lldd_max_execute_num = 0; +module_param_named(collector, lldd_max_execute_num, int, S_IRUGO); +MODULE_PARM_DESC(collector, "\n" + "\tIf greater than one, tells the SAS Layer to run in Task Collector\n" + "\tMode. If 1 or 0, tells the SAS Layer to run in Direct Mode.\n" + "\tThe aic94xx SAS LLDD supports both modes.\n" + "\tDefault: 0 (Direct Mode).\n"); + +char sas_addr_str[2*SAS_ADDR_SIZE + 1] = ""; + +static struct scsi_transport_template *aic94xx_transport_template; + +static struct scsi_host_template aic94xx_sht = { + .module = THIS_MODULE, + /* .name is initialized */ + .name = "aic94xx", + .queuecommand = sas_queuecommand, + .target_alloc = sas_target_alloc, + .slave_configure = sas_slave_configure, + .slave_destroy = sas_slave_destroy, + .change_queue_depth = sas_change_queue_depth, + .change_queue_type = sas_change_queue_type, + .bios_param = sas_bios_param, + .can_queue = 1, + .cmd_per_lun = 1, + .this_id = -1, + .sg_tablesize = SG_ALL, + .max_sectors = SCSI_DEFAULT_MAX_SECTORS, + .use_clustering = ENABLE_CLUSTERING, +}; + +static int __devinit asd_map_memio(struct asd_ha_struct *asd_ha) +{ + int err, i; + struct asd_ha_addrspace *io_handle; + + asd_ha->iospace = 0; + for (i = 0; i < 3; i += 2) { + io_handle = &asd_ha->io_handle[i==0?0:1]; + io_handle->start = pci_resource_start(asd_ha->pcidev, i); + io_handle->len = pci_resource_len(asd_ha->pcidev, i); + io_handle->flags = pci_resource_flags(asd_ha->pcidev, i); + err = -ENODEV; + if (!io_handle->start || !io_handle->len) { + asd_printk("MBAR%d start or length for %s is 0.\n", + i==0?0:1, pci_name(asd_ha->pcidev)); + goto Err; + } + err = pci_request_region(asd_ha->pcidev, i, ASD_DRIVER_NAME); + if (err) { + asd_printk("couldn't reserve memory region for %s\n", + pci_name(asd_ha->pcidev)); + goto Err; + } + if (io_handle->flags & IORESOURCE_CACHEABLE) + io_handle->addr = ioremap(io_handle->start, + io_handle->len); + else + io_handle->addr = ioremap_nocache(io_handle->start, + io_handle->len); + if (!io_handle->addr) { + asd_printk("couldn't map MBAR%d of %s\n", i==0?0:1, + pci_name(asd_ha->pcidev)); + goto Err_unreq; + } + } + + return 0; +Err_unreq: + pci_release_region(asd_ha->pcidev, i); +Err: + if (i > 0) { + io_handle = &asd_ha->io_handle[0]; + iounmap(io_handle->addr); + pci_release_region(asd_ha->pcidev, 0); + } + return err; +} + +static void __devexit asd_unmap_memio(struct asd_ha_struct *asd_ha) +{ + struct asd_ha_addrspace *io_handle; + + io_handle = &asd_ha->io_handle[1]; + iounmap(io_handle->addr); + pci_release_region(asd_ha->pcidev, 2); + + io_handle = &asd_ha->io_handle[0]; + iounmap(io_handle->addr); + pci_release_region(asd_ha->pcidev, 0); +} + +static int __devinit asd_map_ioport(struct asd_ha_struct *asd_ha) +{ + int i = PCI_IOBAR_OFFSET, err; + struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[0]; + + asd_ha->iospace = 1; + io_handle->start = pci_resource_start(asd_ha->pcidev, i); + io_handle->len = pci_resource_len(asd_ha->pcidev, i); + io_handle->flags = pci_resource_flags(asd_ha->pcidev, i); + io_handle->addr = (void __iomem *) io_handle->start; + if (!io_handle->start || !io_handle->len) { + asd_printk("couldn't get IO ports for %s\n", + pci_name(asd_ha->pcidev)); + return -ENODEV; + } + err = pci_request_region(asd_ha->pcidev, i, ASD_DRIVER_NAME); + if (err) { + asd_printk("couldn't reserve io space for %s\n", + pci_name(asd_ha->pcidev)); + } + + return err; +} + +static void __devexit asd_unmap_ioport(struct asd_ha_struct *asd_ha) +{ + pci_release_region(asd_ha->pcidev, PCI_IOBAR_OFFSET); +} + +static int __devinit asd_map_ha(struct asd_ha_struct *asd_ha) +{ + int err; + u16 cmd_reg; + + err = pci_read_config_word(asd_ha->pcidev, PCI_COMMAND, &cmd_reg); + if (err) { + asd_printk("couldn't read command register of %s\n", + pci_name(asd_ha->pcidev)); + goto Err; + } + + err = -ENODEV; + if (cmd_reg & PCI_COMMAND_MEMORY) { + if ((err = asd_map_memio(asd_ha))) + goto Err; + } else if (cmd_reg & PCI_COMMAND_IO) { + if ((err = asd_map_ioport(asd_ha))) + goto Err; + asd_printk("%s ioport mapped -- upgrade your hardware\n", + pci_name(asd_ha->pcidev)); + } else { + asd_printk("no proper device access to %s\n", + pci_name(asd_ha->pcidev)); + goto Err; + } + + return 0; +Err: + return err; +} + +static void __devexit asd_unmap_ha(struct asd_ha_struct *asd_ha) +{ + if (asd_ha->iospace) + asd_unmap_ioport(asd_ha); + else + asd_unmap_memio(asd_ha); +} + +static const char *asd_dev_rev[30] = { + [0] = "A0", + [1] = "A1", + [8] = "B0", +}; + +static int __devinit asd_common_setup(struct asd_ha_struct *asd_ha) +{ + int err, i; + + err = pci_read_config_byte(asd_ha->pcidev, PCI_REVISION_ID, + &asd_ha->revision_id); + if (err) { + asd_printk("couldn't read REVISION ID register of %s\n", + pci_name(asd_ha->pcidev)); + goto Err; + } + err = -ENODEV; + if (asd_ha->revision_id < AIC9410_DEV_REV_B0) { + asd_printk("%s is revision %s (%X), which is not supported\n", + pci_name(asd_ha->pcidev), + asd_dev_rev[asd_ha->revision_id], + asd_ha->revision_id); + goto Err; + } + /* Provide some sane default values. */ + asd_ha->hw_prof.max_scbs = 512; + asd_ha->hw_prof.max_ddbs = 128; + asd_ha->hw_prof.num_phys = ASD_MAX_PHYS; + /* All phys are enabled, by default. */ + asd_ha->hw_prof.enabled_phys = 0xFF; + for (i = 0; i < ASD_MAX_PHYS; i++) { + asd_ha->hw_prof.phy_desc[i].max_sas_lrate = + SAS_LINK_RATE_3_0_GBPS; + asd_ha->hw_prof.phy_desc[i].min_sas_lrate = + SAS_LINK_RATE_1_5_GBPS; + asd_ha->hw_prof.phy_desc[i].max_sata_lrate = + SAS_LINK_RATE_1_5_GBPS; + asd_ha->hw_prof.phy_desc[i].min_sata_lrate = + SAS_LINK_RATE_1_5_GBPS; + } + + return 0; +Err: + return err; +} + +static int __devinit asd_aic9410_setup(struct asd_ha_struct *asd_ha) +{ + int err = asd_common_setup(asd_ha); + + if (err) + return err; + + asd_ha->hw_prof.addr_range = 8; + asd_ha->hw_prof.port_name_base = 0; + asd_ha->hw_prof.dev_name_base = 8; + asd_ha->hw_prof.sata_name_base = 16; + + return 0; +} + +static int __devinit asd_aic9405_setup(struct asd_ha_struct *asd_ha) +{ + int err = asd_common_setup(asd_ha); + + if (err) + return err; + + asd_ha->hw_prof.addr_range = 4; + asd_ha->hw_prof.port_name_base = 0; + asd_ha->hw_prof.dev_name_base = 4; + asd_ha->hw_prof.sata_name_base = 8; + + return 0; +} + +static ssize_t asd_show_dev_rev(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct asd_ha_struct *asd_ha = dev_to_asd_ha(dev); + return snprintf(buf, PAGE_SIZE, "%s\n", + asd_dev_rev[asd_ha->revision_id]); +} +static DEVICE_ATTR(revision, S_IRUGO, asd_show_dev_rev, NULL); + +static ssize_t asd_show_dev_bios_build(struct device *dev, + struct device_attribute *attr,char *buf) +{ + struct asd_ha_struct *asd_ha = dev_to_asd_ha(dev); + return snprintf(buf, PAGE_SIZE, "%d\n", asd_ha->hw_prof.bios.bld); +} +static DEVICE_ATTR(bios_build, S_IRUGO, asd_show_dev_bios_build, NULL); + +static ssize_t asd_show_dev_pcba_sn(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct asd_ha_struct *asd_ha = dev_to_asd_ha(dev); + return snprintf(buf, PAGE_SIZE, "%s\n", asd_ha->hw_prof.pcba_sn); +} +static DEVICE_ATTR(pcba_sn, S_IRUGO, asd_show_dev_pcba_sn, NULL); + +static void asd_create_dev_attrs(struct asd_ha_struct *asd_ha) +{ + device_create_file(&asd_ha->pcidev->dev, &dev_attr_revision); + device_create_file(&asd_ha->pcidev->dev, &dev_attr_bios_build); + device_create_file(&asd_ha->pcidev->dev, &dev_attr_pcba_sn); +} + +static void asd_remove_dev_attrs(struct asd_ha_struct *asd_ha) +{ + device_remove_file(&asd_ha->pcidev->dev, &dev_attr_revision); + device_remove_file(&asd_ha->pcidev->dev, &dev_attr_bios_build); + device_remove_file(&asd_ha->pcidev->dev, &dev_attr_pcba_sn); +} + +/* The first entry, 0, is used for dynamic ids, the rest for devices + * we know about. + */ +static struct asd_pcidev_struct { + const char * name; + int (*setup)(struct asd_ha_struct *asd_ha); +} asd_pcidev_data[] = { + /* Id 0 is used for dynamic ids. */ + { .name = "Adaptec AIC-94xx SAS/SATA Host Adapter", + .setup = asd_aic9410_setup + }, + { .name = "Adaptec AIC-9410W SAS/SATA Host Adapter", + .setup = asd_aic9410_setup + }, + { .name = "Adaptec AIC-9405W SAS/SATA Host Adapter", + .setup = asd_aic9405_setup + }, +}; + +static inline int asd_create_ha_caches(struct asd_ha_struct *asd_ha) +{ + asd_ha->scb_pool = dma_pool_create(ASD_DRIVER_NAME "_scb_pool", + &asd_ha->pcidev->dev, + sizeof(struct scb), + 8, 0); + if (!asd_ha->scb_pool) { + asd_printk("couldn't create scb pool\n"); + return -ENOMEM; + } + + return 0; +} + +/** + * asd_free_edbs -- free empty data buffers + * asd_ha: pointer to host adapter structure + */ +static inline void asd_free_edbs(struct asd_ha_struct *asd_ha) +{ + struct asd_seq_data *seq = &asd_ha->seq; + int i; + + for (i = 0; i < seq->num_edbs; i++) + asd_free_coherent(asd_ha, seq->edb_arr[i]); + kfree(seq->edb_arr); + seq->edb_arr = NULL; +} + +static inline void asd_free_escbs(struct asd_ha_struct *asd_ha) +{ + struct asd_seq_data *seq = &asd_ha->seq; + int i; + + for (i = 0; i < seq->num_escbs; i++) { + if (!list_empty(&seq->escb_arr[i]->list)) + list_del_init(&seq->escb_arr[i]->list); + + asd_ascb_free(seq->escb_arr[i]); + } + kfree(seq->escb_arr); + seq->escb_arr = NULL; +} + +static inline void asd_destroy_ha_caches(struct asd_ha_struct *asd_ha) +{ + int i; + + if (asd_ha->hw_prof.ddb_ext) + asd_free_coherent(asd_ha, asd_ha->hw_prof.ddb_ext); + if (asd_ha->hw_prof.scb_ext) + asd_free_coherent(asd_ha, asd_ha->hw_prof.scb_ext); + + if (asd_ha->hw_prof.ddb_bitmap) + kfree(asd_ha->hw_prof.ddb_bitmap); + asd_ha->hw_prof.ddb_bitmap = NULL; + + for (i = 0; i < ASD_MAX_PHYS; i++) { + struct asd_phy *phy = &asd_ha->phys[i]; + + asd_free_coherent(asd_ha, phy->id_frm_tok); + } + if (asd_ha->seq.escb_arr) + asd_free_escbs(asd_ha); + if (asd_ha->seq.edb_arr) + asd_free_edbs(asd_ha); + if (asd_ha->hw_prof.ue.area) { + kfree(asd_ha->hw_prof.ue.area); + asd_ha->hw_prof.ue.area = NULL; + } + if (asd_ha->seq.tc_index_array) { + kfree(asd_ha->seq.tc_index_array); + kfree(asd_ha->seq.tc_index_bitmap); + asd_ha->seq.tc_index_array = NULL; + asd_ha->seq.tc_index_bitmap = NULL; + } + if (asd_ha->seq.actual_dl) { + asd_free_coherent(asd_ha, asd_ha->seq.actual_dl); + asd_ha->seq.actual_dl = NULL; + asd_ha->seq.dl = NULL; + } + if (asd_ha->seq.next_scb.vaddr) { + dma_pool_free(asd_ha->scb_pool, asd_ha->seq.next_scb.vaddr, + asd_ha->seq.next_scb.dma_handle); + asd_ha->seq.next_scb.vaddr = NULL; + } + dma_pool_destroy(asd_ha->scb_pool); + asd_ha->scb_pool = NULL; +} + +kmem_cache_t *asd_dma_token_cache; +kmem_cache_t *asd_ascb_cache; + +static int asd_create_global_caches(void) +{ + if (!asd_dma_token_cache) { + asd_dma_token_cache + = kmem_cache_create(ASD_DRIVER_NAME "_dma_token", + sizeof(struct asd_dma_tok), + 0, + SLAB_HWCACHE_ALIGN, + NULL, NULL); + if (!asd_dma_token_cache) { + asd_printk("couldn't create dma token cache\n"); + return -ENOMEM; + } + } + + if (!asd_ascb_cache) { + asd_ascb_cache = kmem_cache_create(ASD_DRIVER_NAME "_ascb", + sizeof(struct asd_ascb), + 0, + SLAB_HWCACHE_ALIGN, + NULL, NULL); + if (!asd_ascb_cache) { + asd_printk("couldn't create ascb cache\n"); + goto Err; + } + } + + return 0; +Err: + kmem_cache_destroy(asd_dma_token_cache); + asd_dma_token_cache = NULL; + return -ENOMEM; +} + +static void asd_destroy_global_caches(void) +{ + if (asd_dma_token_cache) + kmem_cache_destroy(asd_dma_token_cache); + asd_dma_token_cache = NULL; + + if (asd_ascb_cache) + kmem_cache_destroy(asd_ascb_cache); + asd_ascb_cache = NULL; +} + +static int asd_register_sas_ha(struct asd_ha_struct *asd_ha) +{ + int i; + struct asd_sas_phy **sas_phys = + kmalloc(ASD_MAX_PHYS * sizeof(struct asd_sas_phy), GFP_KERNEL); + struct asd_sas_port **sas_ports = + kmalloc(ASD_MAX_PHYS * sizeof(struct asd_sas_port), GFP_KERNEL); + + if (!sas_phys || !sas_ports) { + kfree(sas_phys); + kfree(sas_ports); + return -ENOMEM; + } + + asd_ha->sas_ha.sas_ha_name = (char *) asd_ha->name; + asd_ha->sas_ha.lldd_module = THIS_MODULE; + asd_ha->sas_ha.sas_addr = &asd_ha->hw_prof.sas_addr[0]; + + for (i = 0; i < ASD_MAX_PHYS; i++) { + sas_phys[i] = &asd_ha->phys[i].sas_phy; + sas_ports[i] = &asd_ha->ports[i]; + } + + asd_ha->sas_ha.sas_phy = sas_phys; + asd_ha->sas_ha.sas_port= sas_ports; + asd_ha->sas_ha.num_phys= ASD_MAX_PHYS; + + asd_ha->sas_ha.lldd_queue_size = asd_ha->seq.can_queue; + + return sas_register_ha(&asd_ha->sas_ha); +} + +static int asd_unregister_sas_ha(struct asd_ha_struct *asd_ha) +{ + int err; + + err = sas_unregister_ha(&asd_ha->sas_ha); + + sas_remove_host(asd_ha->sas_ha.core.shost); + scsi_remove_host(asd_ha->sas_ha.core.shost); + scsi_host_put(asd_ha->sas_ha.core.shost); + + kfree(asd_ha->sas_ha.sas_phy); + kfree(asd_ha->sas_ha.sas_port); + + return err; +} + +static int __devinit asd_pci_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + struct asd_pcidev_struct *asd_dev; + unsigned asd_id = (unsigned) id->driver_data; + struct asd_ha_struct *asd_ha; + struct Scsi_Host *shost; + int err; + + if (asd_id >= ARRAY_SIZE(asd_pcidev_data)) { + asd_printk("wrong driver_data in PCI table\n"); + return -ENODEV; + } + + if ((err = pci_enable_device(dev))) { + asd_printk("couldn't enable device %s\n", pci_name(dev)); + return err; + } + + pci_set_master(dev); + + err = -ENOMEM; + + shost = scsi_host_alloc(&aic94xx_sht, sizeof(void *)); + if (!shost) + goto Err; + + asd_dev = &asd_pcidev_data[asd_id]; + + asd_ha = kzalloc(sizeof(*asd_ha), GFP_KERNEL); + if (!asd_ha) { + asd_printk("out of memory\n"); + goto Err; + } + asd_ha->pcidev = dev; + asd_ha->sas_ha.pcidev = asd_ha->pcidev; + asd_ha->sas_ha.lldd_ha = asd_ha; + + asd_ha->name = asd_dev->name; + asd_printk("found %s, device %s\n", asd_ha->name, pci_name(dev)); + + SHOST_TO_SAS_HA(shost) = &asd_ha->sas_ha; + asd_ha->sas_ha.core.shost = shost; + shost->transportt = aic94xx_transport_template; + shost->max_id = ~0; + shost->max_lun = ~0; + shost->max_cmd_len = 16; + + err = scsi_add_host(shost, &dev->dev); + if (err) { + scsi_host_put(shost); + goto Err_free; + } + + + + err = asd_dev->setup(asd_ha); + if (err) + goto Err_free; + + err = -ENODEV; + if (!pci_set_dma_mask(dev, DMA_64BIT_MASK) + && !pci_set_consistent_dma_mask(dev, DMA_64BIT_MASK)) + ; + else if (!pci_set_dma_mask(dev, DMA_32BIT_MASK) + && !pci_set_consistent_dma_mask(dev, DMA_32BIT_MASK)) + ; + else { + asd_printk("no suitable DMA mask for %s\n", pci_name(dev)); + goto Err_free; + } + + pci_set_drvdata(dev, asd_ha); + + err = asd_map_ha(asd_ha); + if (err) + goto Err_free; + + err = asd_create_ha_caches(asd_ha); + if (err) + goto Err_unmap; + + err = asd_init_hw(asd_ha); + if (err) + goto Err_free_cache; + + asd_printk("device %s: SAS addr %llx, PCBA SN %s, %d phys, %d enabled " + "phys, flash %s, BIOS %s%d\n", + pci_name(dev), SAS_ADDR(asd_ha->hw_prof.sas_addr), + asd_ha->hw_prof.pcba_sn, asd_ha->hw_prof.max_phys, + asd_ha->hw_prof.num_phys, + asd_ha->hw_prof.flash.present ? "present" : "not present", + asd_ha->hw_prof.bios.present ? "build " : "not present", + asd_ha->hw_prof.bios.bld); + + shost->can_queue = asd_ha->seq.can_queue; + + if (use_msi) + pci_enable_msi(asd_ha->pcidev); + + err = request_irq(asd_ha->pcidev->irq, asd_hw_isr, SA_SHIRQ, + ASD_DRIVER_NAME, asd_ha); + if (err) { + asd_printk("couldn't get irq %d for %s\n", + asd_ha->pcidev->irq, pci_name(asd_ha->pcidev)); + goto Err_irq; + } + asd_enable_ints(asd_ha); + + err = asd_init_post_escbs(asd_ha); + if (err) { + asd_printk("couldn't post escbs for %s\n", + pci_name(asd_ha->pcidev)); + goto Err_escbs; + } + ASD_DPRINTK("escbs posted\n"); + + asd_create_dev_attrs(asd_ha); + + err = asd_register_sas_ha(asd_ha); + if (err) + goto Err_reg_sas; + + err = asd_enable_phys(asd_ha, asd_ha->hw_prof.enabled_phys); + if (err) { + asd_printk("coudln't enable phys, err:%d\n", err); + goto Err_en_phys; + } + ASD_DPRINTK("enabled phys\n"); + /* give the phy enabling interrupt event time to come in (1s + * is empirically about all it takes) */ + ssleep(1); + /* Wait for discovery to finish */ + scsi_flush_work(asd_ha->sas_ha.core.shost); + + return 0; +Err_en_phys: + asd_unregister_sas_ha(asd_ha); +Err_reg_sas: + asd_remove_dev_attrs(asd_ha); +Err_escbs: + asd_disable_ints(asd_ha); + free_irq(dev->irq, asd_ha); +Err_irq: + if (use_msi) + pci_disable_msi(dev); + asd_chip_hardrst(asd_ha); +Err_free_cache: + asd_destroy_ha_caches(asd_ha); +Err_unmap: + asd_unmap_ha(asd_ha); +Err_free: + kfree(asd_ha); + scsi_remove_host(shost); +Err: + pci_disable_device(dev); + return err; +} + +static void asd_free_queues(struct asd_ha_struct *asd_ha) +{ + unsigned long flags; + LIST_HEAD(pending); + struct list_head *n, *pos; + + spin_lock_irqsave(&asd_ha->seq.pend_q_lock, flags); + asd_ha->seq.pending = 0; + list_splice_init(&asd_ha->seq.pend_q, &pending); + spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags); + + if (!list_empty(&pending)) + ASD_DPRINTK("Uh-oh! Pending is not empty!\n"); + + list_for_each_safe(pos, n, &pending) { + struct asd_ascb *ascb = list_entry(pos, struct asd_ascb, list); + list_del_init(pos); + ASD_DPRINTK("freeing from pending\n"); + asd_ascb_free(ascb); + } +} + +static void asd_turn_off_leds(struct asd_ha_struct *asd_ha) +{ + u8 phy_mask = asd_ha->hw_prof.enabled_phys; + u8 i; + + for_each_phy(phy_mask, phy_mask, i) { + asd_turn_led(asd_ha, i, 0); + asd_control_led(asd_ha, i, 0); + } +} + +static void __devexit asd_pci_remove(struct pci_dev *dev) +{ + struct asd_ha_struct *asd_ha = pci_get_drvdata(dev); + + if (!asd_ha) + return; + + asd_unregister_sas_ha(asd_ha); + + asd_disable_ints(asd_ha); + + asd_remove_dev_attrs(asd_ha); + + /* XXX more here as needed */ + + free_irq(dev->irq, asd_ha); + if (use_msi) + pci_disable_msi(asd_ha->pcidev); + asd_turn_off_leds(asd_ha); + asd_chip_hardrst(asd_ha); + asd_free_queues(asd_ha); + asd_destroy_ha_caches(asd_ha); + asd_unmap_ha(asd_ha); + kfree(asd_ha); + pci_disable_device(dev); + return; +} + +static ssize_t asd_version_show(struct device_driver *driver, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%s\n", ASD_DRIVER_VERSION); +} +static DRIVER_ATTR(version, S_IRUGO, asd_version_show, NULL); + +static void asd_create_driver_attrs(struct device_driver *driver) +{ + driver_create_file(driver, &driver_attr_version); +} + +static void asd_remove_driver_attrs(struct device_driver *driver) +{ + driver_remove_file(driver, &driver_attr_version); +} + +static struct sas_domain_function_template aic94xx_transport_functions = { + .lldd_port_formed = asd_update_port_links, + + .lldd_dev_found = asd_dev_found, + .lldd_dev_gone = asd_dev_gone, + + .lldd_execute_task = asd_execute_task, + + .lldd_abort_task = asd_abort_task, + .lldd_abort_task_set = asd_abort_task_set, + .lldd_clear_aca = asd_clear_aca, + .lldd_clear_task_set = asd_clear_task_set, + .lldd_I_T_nexus_reset = NULL, + .lldd_lu_reset = asd_lu_reset, + .lldd_query_task = asd_query_task, + + .lldd_clear_nexus_port = asd_clear_nexus_port, + .lldd_clear_nexus_ha = asd_clear_nexus_ha, + + .lldd_control_phy = asd_control_phy, +}; + +static const struct pci_device_id aic94xx_pci_table[] __devinitdata = { + {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR10), + 0, 0, 1}, + {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR12), + 0, 0, 1}, + {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR1E), + 0, 0, 1}, + {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR30), + 0, 0, 2}, + {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR32), + 0, 0, 2}, + {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR3E), + 0, 0, 2}, + {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_RAZOR3F), + 0, 0, 2}, + {} +}; + +MODULE_DEVICE_TABLE(pci, aic94xx_pci_table); + +static struct pci_driver aic94xx_pci_driver = { + .name = ASD_DRIVER_NAME, + .id_table = aic94xx_pci_table, + .probe = asd_pci_probe, + .remove = __devexit_p(asd_pci_remove), +}; + +static int __init aic94xx_init(void) +{ + int err; + + + asd_printk("%s version %s loaded\n", ASD_DRIVER_DESCRIPTION, + ASD_DRIVER_VERSION); + + err = asd_create_global_caches(); + if (err) + return err; + + aic94xx_transport_template = + sas_domain_attach_transport(&aic94xx_transport_functions); + if (!aic94xx_transport_template) + goto out_destroy_caches; + + err = pci_register_driver(&aic94xx_pci_driver); + if (err) + goto out_release_transport; + + asd_create_driver_attrs(&aic94xx_pci_driver.driver); + + return err; + + out_release_transport: + sas_release_transport(aic94xx_transport_template); + out_destroy_caches: + asd_destroy_global_caches(); + + return err; +} + +static void __exit aic94xx_exit(void) +{ + asd_remove_driver_attrs(&aic94xx_pci_driver.driver); + pci_unregister_driver(&aic94xx_pci_driver); + sas_release_transport(aic94xx_transport_template); + asd_destroy_global_caches(); + asd_printk("%s version %s unloaded\n", ASD_DRIVER_DESCRIPTION, + ASD_DRIVER_VERSION); +} + +module_init(aic94xx_init); +module_exit(aic94xx_exit); + +MODULE_AUTHOR("Luben Tuikov <luben_tuikov@adaptec.com>"); +MODULE_DESCRIPTION(ASD_DRIVER_DESCRIPTION); +MODULE_LICENSE("GPL v2"); +MODULE_VERSION(ASD_DRIVER_VERSION); diff --git a/drivers/scsi/aic94xx/aic94xx_reg.c b/drivers/scsi/aic94xx/aic94xx_reg.c new file mode 100644 index 00000000000..f210dac3203 --- /dev/null +++ b/drivers/scsi/aic94xx/aic94xx_reg.c @@ -0,0 +1,332 @@ +/* + * Aic94xx SAS/SATA driver register access. + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This file is part of the aic94xx driver. + * + * The aic94xx driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * The aic94xx driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the aic94xx driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include <linux/pci.h> +#include "aic94xx_reg.h" +#include "aic94xx.h" + +/* Writing to device address space. + * Offset comes before value to remind that the operation of + * this function is *offs = val. + */ +static inline void asd_write_byte(struct asd_ha_struct *asd_ha, + unsigned long offs, u8 val) +{ + if (unlikely(asd_ha->iospace)) + outb(val, + (unsigned long)asd_ha->io_handle[0].addr + (offs & 0xFF)); + else + writeb(val, asd_ha->io_handle[0].addr + offs); + wmb(); +} + +static inline void asd_write_word(struct asd_ha_struct *asd_ha, + unsigned long offs, u16 val) +{ + if (unlikely(asd_ha->iospace)) + outw(val, + (unsigned long)asd_ha->io_handle[0].addr + (offs & 0xFF)); + else + writew(val, asd_ha->io_handle[0].addr + offs); + wmb(); +} + +static inline void asd_write_dword(struct asd_ha_struct *asd_ha, + unsigned long offs, u32 val) +{ + if (unlikely(asd_ha->iospace)) + outl(val, + (unsigned long)asd_ha->io_handle[0].addr + (offs & 0xFF)); + else + writel(val, asd_ha->io_handle[0].addr + offs); + wmb(); +} + +/* Reading from device address space. + */ +static inline u8 asd_read_byte(struct asd_ha_struct *asd_ha, + unsigned long offs) +{ + u8 val; + if (unlikely(asd_ha->iospace)) + val = inb((unsigned long) asd_ha->io_handle[0].addr + + (offs & 0xFF)); + else + val = readb(asd_ha->io_handle[0].addr + offs); + rmb(); + return val; +} + +static inline u16 asd_read_word(struct asd_ha_struct *asd_ha, + unsigned long offs) +{ + u16 val; + if (unlikely(asd_ha->iospace)) + val = inw((unsigned long)asd_ha->io_handle[0].addr + + (offs & 0xFF)); + else + val = readw(asd_ha->io_handle[0].addr + offs); + rmb(); + return val; +} + +static inline u32 asd_read_dword(struct asd_ha_struct *asd_ha, + unsigned long offs) +{ + u32 val; + if (unlikely(asd_ha->iospace)) + val = inl((unsigned long) asd_ha->io_handle[0].addr + + (offs & 0xFF)); + else + val = readl(asd_ha->io_handle[0].addr + offs); + rmb(); + return val; +} + +static inline u32 asd_mem_offs_swa(void) +{ + return 0; +} + +static inline u32 asd_mem_offs_swc(void) +{ + return asd_mem_offs_swa() + MBAR0_SWA_SIZE; +} + +static inline u32 asd_mem_offs_swb(void) +{ + return asd_mem_offs_swc() + MBAR0_SWC_SIZE + 0x20; +} + +/* We know that the register wanted is in the range + * of the sliding window. + */ +#define ASD_READ_SW(ww, type, ord) \ +static inline type asd_read_##ww##_##ord (struct asd_ha_struct *asd_ha,\ + u32 reg) \ +{ \ + struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[0]; \ + u32 map_offs=(reg - io_handle-> ww##_base )+asd_mem_offs_##ww ();\ + return asd_read_##ord (asd_ha, (unsigned long) map_offs); \ +} + +#define ASD_WRITE_SW(ww, type, ord) \ +static inline void asd_write_##ww##_##ord (struct asd_ha_struct *asd_ha,\ + u32 reg, type val) \ +{ \ + struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[0]; \ + u32 map_offs=(reg - io_handle-> ww##_base )+asd_mem_offs_##ww ();\ + asd_write_##ord (asd_ha, (unsigned long) map_offs, val); \ +} + +ASD_READ_SW(swa, u8, byte); +ASD_READ_SW(swa, u16, word); +ASD_READ_SW(swa, u32, dword); + +ASD_READ_SW(swb, u8, byte); +ASD_READ_SW(swb, u16, word); +ASD_READ_SW(swb, u32, dword); + +ASD_READ_SW(swc, u8, byte); +ASD_READ_SW(swc, u16, word); +ASD_READ_SW(swc, u32, dword); + +ASD_WRITE_SW(swa, u8, byte); +ASD_WRITE_SW(swa, u16, word); +ASD_WRITE_SW(swa, u32, dword); + +ASD_WRITE_SW(swb, u8, byte); +ASD_WRITE_SW(swb, u16, word); +ASD_WRITE_SW(swb, u32, dword); + +ASD_WRITE_SW(swc, u8, byte); +ASD_WRITE_SW(swc, u16, word); +ASD_WRITE_SW(swc, u32, dword); + +/* + * A word about sliding windows: + * MBAR0 is divided into sliding windows A, C and B, in that order. + * SWA starts at offset 0 of MBAR0, up to 0x57, with size 0x58 bytes. + * SWC starts at offset 0x58 of MBAR0, up to 0x60, with size 0x8 bytes. + * From 0x60 to 0x7F, we have a copy of PCI config space 0x60-0x7F. + * SWB starts at offset 0x80 of MBAR0 and extends to the end of MBAR0. + * See asd_init_sw() in aic94xx_hwi.c + * + * We map the most common registers we'd access of the internal 4GB + * host adapter memory space. If a register/internal memory location + * is wanted which is not mapped, we slide SWB, by paging it, + * see asd_move_swb() in aic94xx_reg.c. + */ + +/** + * asd_move_swb -- move sliding window B + * @asd_ha: pointer to host adapter structure + * @reg: register desired to be within range of the new window + */ +static inline void asd_move_swb(struct asd_ha_struct *asd_ha, u32 reg) +{ + u32 base = reg & ~(MBAR0_SWB_SIZE-1); + pci_write_config_dword(asd_ha->pcidev, PCI_CONF_MBAR0_SWB, base); + asd_ha->io_handle[0].swb_base = base; +} + +static void __asd_write_reg_byte(struct asd_ha_struct *asd_ha, u32 reg, u8 val) +{ + struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0]; + BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR); + if (io_handle->swa_base <= reg + && reg < io_handle->swa_base + MBAR0_SWA_SIZE) + asd_write_swa_byte (asd_ha, reg,val); + else if (io_handle->swb_base <= reg + && reg < io_handle->swb_base + MBAR0_SWB_SIZE) + asd_write_swb_byte (asd_ha, reg, val); + else if (io_handle->swc_base <= reg + && reg < io_handle->swc_base + MBAR0_SWC_SIZE) + asd_write_swc_byte (asd_ha, reg, val); + else { + /* Ok, we have to move SWB */ + asd_move_swb(asd_ha, reg); + asd_write_swb_byte (asd_ha, reg, val); + } +} + +#define ASD_WRITE_REG(type, ord) \ +void asd_write_reg_##ord (struct asd_ha_struct *asd_ha, u32 reg, type val)\ +{ \ + struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0]; \ + unsigned long flags; \ + BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR); \ + spin_lock_irqsave(&asd_ha->iolock, flags); \ + if (io_handle->swa_base <= reg \ + && reg < io_handle->swa_base + MBAR0_SWA_SIZE) \ + asd_write_swa_##ord (asd_ha, reg,val); \ + else if (io_handle->swb_base <= reg \ + && reg < io_handle->swb_base + MBAR0_SWB_SIZE) \ + asd_write_swb_##ord (asd_ha, reg, val); \ + else if (io_handle->swc_base <= reg \ + && reg < io_handle->swc_base + MBAR0_SWC_SIZE) \ + asd_write_swc_##ord (asd_ha, reg, val); \ + else { \ + /* Ok, we have to move SWB */ \ + asd_move_swb(asd_ha, reg); \ + asd_write_swb_##ord (asd_ha, reg, val); \ + } \ + spin_unlock_irqrestore(&asd_ha->iolock, flags); \ +} + +ASD_WRITE_REG(u8, byte); +ASD_WRITE_REG(u16,word); +ASD_WRITE_REG(u32,dword); + +static u8 __asd_read_reg_byte(struct asd_ha_struct *asd_ha, u32 reg) +{ + struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0]; + u8 val; + BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR); + if (io_handle->swa_base <= reg + && reg < io_handle->swa_base + MBAR0_SWA_SIZE) + val = asd_read_swa_byte (asd_ha, reg); + else if (io_handle->swb_base <= reg + && reg < io_handle->swb_base + MBAR0_SWB_SIZE) + val = asd_read_swb_byte (asd_ha, reg); + else if (io_handle->swc_base <= reg + && reg < io_handle->swc_base + MBAR0_SWC_SIZE) + val = asd_read_swc_byte (asd_ha, reg); + else { + /* Ok, we have to move SWB */ + asd_move_swb(asd_ha, reg); + val = asd_read_swb_byte (asd_ha, reg); + } + return val; +} + +#define ASD_READ_REG(type, ord) \ +type asd_read_reg_##ord (struct asd_ha_struct *asd_ha, u32 reg) \ +{ \ + struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0]; \ + type val; \ + unsigned long flags; \ + BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR); \ + spin_lock_irqsave(&asd_ha->iolock, flags); \ + if (io_handle->swa_base <= reg \ + && reg < io_handle->swa_base + MBAR0_SWA_SIZE) \ + val = asd_read_swa_##ord (asd_ha, reg); \ + else if (io_handle->swb_base <= reg \ + && reg < io_handle->swb_base + MBAR0_SWB_SIZE) \ + val = asd_read_swb_##ord (asd_ha, reg); \ + else if (io_handle->swc_base <= reg \ + && reg < io_handle->swc_base + MBAR0_SWC_SIZE) \ + val = asd_read_swc_##ord (asd_ha, reg); \ + else { \ + /* Ok, we have to move SWB */ \ + asd_move_swb(asd_ha, reg); \ + val = asd_read_swb_##ord (asd_ha, reg); \ + } \ + spin_unlock_irqrestore(&asd_ha->iolock, flags); \ + return val; \ +} + +ASD_READ_REG(u8, byte); +ASD_READ_REG(u16,word); +ASD_READ_REG(u32,dword); + +/** + * asd_read_reg_string -- read a string of bytes from io space memory + * @asd_ha: pointer to host adapter structure + * @dst: pointer to a destination buffer where data will be written to + * @offs: start offset (register) to read from + * @count: number of bytes to read + */ +void asd_read_reg_string(struct asd_ha_struct *asd_ha, void *dst, + u32 offs, int count) +{ + u8 *p = dst; + unsigned long flags; + + spin_lock_irqsave(&asd_ha->iolock, flags); + for ( ; count > 0; count--, offs++, p++) + *p = __asd_read_reg_byte(asd_ha, offs); + spin_unlock_irqrestore(&asd_ha->iolock, flags); +} + +/** + * asd_write_reg_string -- write a string of bytes to io space memory + * @asd_ha: pointer to host adapter structure + * @src: pointer to source buffer where data will be read from + * @offs: start offset (register) to write to + * @count: number of bytes to write + */ +void asd_write_reg_string(struct asd_ha_struct *asd_ha, void *src, + u32 offs, int count) +{ + u8 *p = src; + unsigned long flags; + + spin_lock_irqsave(&asd_ha->iolock, flags); + for ( ; count > 0; count--, offs++, p++) + __asd_write_reg_byte(asd_ha, offs, *p); + spin_unlock_irqrestore(&asd_ha->iolock, flags); +} diff --git a/drivers/scsi/aic94xx/aic94xx_reg.h b/drivers/scsi/aic94xx/aic94xx_reg.h new file mode 100644 index 00000000000..2279307fd27 --- /dev/null +++ b/drivers/scsi/aic94xx/aic94xx_reg.h @@ -0,0 +1,302 @@ +/* + * Aic94xx SAS/SATA driver hardware registers definitions. + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This file is part of the aic94xx driver. + * + * The aic94xx driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * The aic94xx driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the aic94xx driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#ifndef _AIC94XX_REG_H_ +#define _AIC94XX_REG_H_ + +#include <asm/io.h> +#include "aic94xx_hwi.h" + +/* Values */ +#define AIC9410_DEV_REV_B0 0x8 + +/* MBAR0, SWA, SWB, SWC, internal memory space addresses */ +#define REG_BASE_ADDR 0xB8000000 +#define REG_BASE_ADDR_CSEQCIO 0xB8002000 +#define REG_BASE_ADDR_EXSI 0xB8042800 + +#define MBAR0_SWA_SIZE 0x58 +extern u32 MBAR0_SWB_SIZE; +#define MBAR0_SWC_SIZE 0x8 + +/* MBAR1, points to On Chip Memory */ +#define OCM_BASE_ADDR 0xA0000000 +#define OCM_MAX_SIZE 0x20000 + +/* Smallest address possible to reference */ +#define ALL_BASE_ADDR OCM_BASE_ADDR + +/* PCI configuration space registers */ +#define PCI_IOBAR_OFFSET 4 + +#define PCI_CONF_MBAR1 0x6C +#define PCI_CONF_MBAR0_SWA 0x70 +#define PCI_CONF_MBAR0_SWB 0x74 +#define PCI_CONF_MBAR0_SWC 0x78 +#define PCI_CONF_MBAR_KEY 0x7C +#define PCI_CONF_FLSH_BAR 0xB8 + +#include "aic94xx_reg_def.h" + +u8 asd_read_reg_byte(struct asd_ha_struct *asd_ha, u32 reg); +u16 asd_read_reg_word(struct asd_ha_struct *asd_ha, u32 reg); +u32 asd_read_reg_dword(struct asd_ha_struct *asd_ha, u32 reg); + +void asd_write_reg_byte(struct asd_ha_struct *asd_ha, u32 reg, u8 val); +void asd_write_reg_word(struct asd_ha_struct *asd_ha, u32 reg, u16 val); +void asd_write_reg_dword(struct asd_ha_struct *asd_ha, u32 reg, u32 val); + +void asd_read_reg_string(struct asd_ha_struct *asd_ha, void *dst, + u32 offs, int count); +void asd_write_reg_string(struct asd_ha_struct *asd_ha, void *src, + u32 offs, int count); + +#define ASD_READ_OCM(type, ord, S) \ +static inline type asd_read_ocm_##ord (struct asd_ha_struct *asd_ha, \ + u32 offs) \ +{ \ + struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[1]; \ + type val = read##S (io_handle->addr + (unsigned long) offs); \ + rmb(); \ + return val; \ +} + +ASD_READ_OCM(u8, byte, b); +ASD_READ_OCM(u16,word, w); +ASD_READ_OCM(u32,dword,l); + +#define ASD_WRITE_OCM(type, ord, S) \ +static inline void asd_write_ocm_##ord (struct asd_ha_struct *asd_ha, \ + u32 offs, type val) \ +{ \ + struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[1]; \ + write##S (val, io_handle->addr + (unsigned long) offs); \ + return; \ +} + +ASD_WRITE_OCM(u8, byte, b); +ASD_WRITE_OCM(u16,word, w); +ASD_WRITE_OCM(u32,dword,l); + +#define ASD_DDBSITE_READ(type, ord) \ +static inline type asd_ddbsite_read_##ord (struct asd_ha_struct *asd_ha, \ + u16 ddb_site_no, \ + u16 offs) \ +{ \ + asd_write_reg_word(asd_ha, ALTCIOADR, MnDDB_SITE + offs); \ + asd_write_reg_word(asd_ha, ADDBPTR, ddb_site_no); \ + return asd_read_reg_##ord (asd_ha, CTXACCESS); \ +} + +ASD_DDBSITE_READ(u32, dword); +ASD_DDBSITE_READ(u16, word); + +static inline u8 asd_ddbsite_read_byte(struct asd_ha_struct *asd_ha, + u16 ddb_site_no, + u16 offs) +{ + if (offs & 1) + return asd_ddbsite_read_word(asd_ha, ddb_site_no, + offs & ~1) >> 8; + else + return asd_ddbsite_read_word(asd_ha, ddb_site_no, + offs) & 0xFF; +} + + +#define ASD_DDBSITE_WRITE(type, ord) \ +static inline void asd_ddbsite_write_##ord (struct asd_ha_struct *asd_ha, \ + u16 ddb_site_no, \ + u16 offs, type val) \ +{ \ + asd_write_reg_word(asd_ha, ALTCIOADR, MnDDB_SITE + offs); \ + asd_write_reg_word(asd_ha, ADDBPTR, ddb_site_no); \ + asd_write_reg_##ord (asd_ha, CTXACCESS, val); \ +} + +ASD_DDBSITE_WRITE(u32, dword); +ASD_DDBSITE_WRITE(u16, word); + +static inline void asd_ddbsite_write_byte(struct asd_ha_struct *asd_ha, + u16 ddb_site_no, + u16 offs, u8 val) +{ + u16 base = offs & ~1; + u16 rval = asd_ddbsite_read_word(asd_ha, ddb_site_no, base); + if (offs & 1) + rval = (val << 8) | (rval & 0xFF); + else + rval = (rval & 0xFF00) | val; + asd_ddbsite_write_word(asd_ha, ddb_site_no, base, rval); +} + + +#define ASD_SCBSITE_READ(type, ord) \ +static inline type asd_scbsite_read_##ord (struct asd_ha_struct *asd_ha, \ + u16 scb_site_no, \ + u16 offs) \ +{ \ + asd_write_reg_word(asd_ha, ALTCIOADR, MnSCB_SITE + offs); \ + asd_write_reg_word(asd_ha, ASCBPTR, scb_site_no); \ + return asd_read_reg_##ord (asd_ha, CTXACCESS); \ +} + +ASD_SCBSITE_READ(u32, dword); +ASD_SCBSITE_READ(u16, word); + +static inline u8 asd_scbsite_read_byte(struct asd_ha_struct *asd_ha, + u16 scb_site_no, + u16 offs) +{ + if (offs & 1) + return asd_scbsite_read_word(asd_ha, scb_site_no, + offs & ~1) >> 8; + else + return asd_scbsite_read_word(asd_ha, scb_site_no, + offs) & 0xFF; +} + + +#define ASD_SCBSITE_WRITE(type, ord) \ +static inline void asd_scbsite_write_##ord (struct asd_ha_struct *asd_ha, \ + u16 scb_site_no, \ + u16 offs, type val) \ +{ \ + asd_write_reg_word(asd_ha, ALTCIOADR, MnSCB_SITE + offs); \ + asd_write_reg_word(asd_ha, ASCBPTR, scb_site_no); \ + asd_write_reg_##ord (asd_ha, CTXACCESS, val); \ +} + +ASD_SCBSITE_WRITE(u32, dword); +ASD_SCBSITE_WRITE(u16, word); + +static inline void asd_scbsite_write_byte(struct asd_ha_struct *asd_ha, + u16 scb_site_no, + u16 offs, u8 val) +{ + u16 base = offs & ~1; + u16 rval = asd_scbsite_read_word(asd_ha, scb_site_no, base); + if (offs & 1) + rval = (val << 8) | (rval & 0xFF); + else + rval = (rval & 0xFF00) | val; + asd_scbsite_write_word(asd_ha, scb_site_no, base, rval); +} + +/** + * asd_ddbsite_update_word -- atomically update a word in a ddb site + * @asd_ha: pointer to host adapter structure + * @ddb_site_no: the DDB site number + * @offs: the offset into the DDB + * @oldval: old value found in that offset + * @newval: the new value to replace it + * + * This function is used when the sequencers are running and we need to + * update a DDB site atomically without expensive pausing and upausing + * of the sequencers and accessing the DDB site through the CIO bus. + * + * Return 0 on success; -EFAULT on parity error; -EAGAIN if the old value + * is different than the current value at that offset. + */ +static inline int asd_ddbsite_update_word(struct asd_ha_struct *asd_ha, + u16 ddb_site_no, u16 offs, + u16 oldval, u16 newval) +{ + u8 done; + u16 oval = asd_ddbsite_read_word(asd_ha, ddb_site_no, offs); + if (oval != oldval) + return -EAGAIN; + asd_write_reg_word(asd_ha, AOLDDATA, oldval); + asd_write_reg_word(asd_ha, ANEWDATA, newval); + do { + done = asd_read_reg_byte(asd_ha, ATOMICSTATCTL); + } while (!(done & ATOMICDONE)); + if (done & ATOMICERR) + return -EFAULT; /* parity error */ + else if (done & ATOMICWIN) + return 0; /* success */ + else + return -EAGAIN; /* oldval different than current value */ +} + +static inline int asd_ddbsite_update_byte(struct asd_ha_struct *asd_ha, + u16 ddb_site_no, u16 offs, + u8 _oldval, u8 _newval) +{ + u16 base = offs & ~1; + u16 oval; + u16 nval = asd_ddbsite_read_word(asd_ha, ddb_site_no, base); + if (offs & 1) { + if ((nval >> 8) != _oldval) + return -EAGAIN; + nval = (_newval << 8) | (nval & 0xFF); + oval = (_oldval << 8) | (nval & 0xFF); + } else { + if ((nval & 0xFF) != _oldval) + return -EAGAIN; + nval = (nval & 0xFF00) | _newval; + oval = (nval & 0xFF00) | _oldval; + } + return asd_ddbsite_update_word(asd_ha, ddb_site_no, base, oval, nval); +} + +static inline void asd_write_reg_addr(struct asd_ha_struct *asd_ha, u32 reg, + dma_addr_t dma_handle) +{ + asd_write_reg_dword(asd_ha, reg, ASD_BUSADDR_LO(dma_handle)); + asd_write_reg_dword(asd_ha, reg+4, ASD_BUSADDR_HI(dma_handle)); +} + +static inline u32 asd_get_cmdctx_size(struct asd_ha_struct *asd_ha) +{ + /* DCHREVISION returns 0, possibly broken */ + u32 ctxmemsize = asd_read_reg_dword(asd_ha, LmMnINT(0,0)) & CTXMEMSIZE; + return ctxmemsize ? 65536 : 32768; +} + +static inline u32 asd_get_devctx_size(struct asd_ha_struct *asd_ha) +{ + u32 ctxmemsize = asd_read_reg_dword(asd_ha, LmMnINT(0,0)) & CTXMEMSIZE; + return ctxmemsize ? 8192 : 4096; +} + +static inline void asd_disable_ints(struct asd_ha_struct *asd_ha) +{ + asd_write_reg_dword(asd_ha, CHIMINTEN, RST_CHIMINTEN); +} + +static inline void asd_enable_ints(struct asd_ha_struct *asd_ha) +{ + /* Enable COM SAS interrupt on errors, COMSTAT */ + asd_write_reg_dword(asd_ha, COMSTATEN, + EN_CSBUFPERR | EN_CSERR | EN_OVLYERR); + /* Enable DCH SAS CFIFTOERR */ + asd_write_reg_dword(asd_ha, DCHSTATUS, EN_CFIFTOERR); + /* Enable Host Device interrupts */ + asd_write_reg_dword(asd_ha, CHIMINTEN, SET_CHIMINTEN); +} + +#endif diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h new file mode 100644 index 00000000000..b79f45f3ad4 --- /dev/null +++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h @@ -0,0 +1,2398 @@ +/* + * Aic94xx SAS/SATA driver hardware registers defintions. + * + * Copyright (C) 2004 Adaptec, Inc. All rights reserved. + * Copyright (C) 2004 David Chaw <david_chaw@adaptec.com> + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * Luben Tuikov: Some register value updates to make it work with the window + * agnostic register r/w functions. Some register corrections, sizes, + * etc. + * + * This file is licensed under GPLv2. + * + * This file is part of the aic94xx driver. + * + * The aic94xx driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * The aic94xx driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the aic94xx driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * $Id: //depot/aic94xx/aic94xx_reg_def.h#27 $ + * + */ + +#ifndef _ADP94XX_REG_DEF_H_ +#define _ADP94XX_REG_DEF_H_ + +/* + * Common definitions. + */ +#define CSEQ_MODE_PAGE_SIZE 0x200 /* CSEQ mode page size */ +#define LmSEQ_MODE_PAGE_SIZE 0x200 /* LmSEQ mode page size */ +#define LmSEQ_HOST_REG_SIZE 0x4000 /* LmSEQ Host Register size */ + +/********************* COM_SAS registers definition *************************/ + +/* The base is REG_BASE_ADDR, defined in aic94xx_reg.h. + */ + +/* + * CHIM Registers, Address Range : (0x00-0xFF) + */ +#define COMBIST (REG_BASE_ADDR + 0x00) + +/* bits 31:24 */ +#define L7BLKRST 0x80000000 +#define L6BLKRST 0x40000000 +#define L5BLKRST 0x20000000 +#define L4BLKRST 0x10000000 +#define L3BLKRST 0x08000000 +#define L2BLKRST 0x04000000 +#define L1BLKRST 0x02000000 +#define L0BLKRST 0x01000000 +#define LmBLKRST 0xFF000000 +#define LmBLKRST_COMBIST(phyid) (1 << (24 + phyid)) + +#define OCMBLKRST 0x00400000 +#define CTXMEMBLKRST 0x00200000 +#define CSEQBLKRST 0x00100000 +#define EXSIBLKRST 0x00040000 +#define DPIBLKRST 0x00020000 +#define DFIFBLKRST 0x00010000 +#define HARDRST 0x00000200 +#define COMBLKRST 0x00000100 +#define FRCDFPERR 0x00000080 +#define FRCCIOPERR 0x00000020 +#define FRCBISTERR 0x00000010 +#define COMBISTEN 0x00000004 +#define COMBISTDONE 0x00000002 /* ro */ +#define COMBISTFAIL 0x00000001 /* ro */ + +#define COMSTAT (REG_BASE_ADDR + 0x04) + +#define REQMBXREAD 0x00000040 +#define RSPMBXAVAIL 0x00000020 +#define CSBUFPERR 0x00000008 +#define OVLYERR 0x00000004 +#define CSERR 0x00000002 +#define OVLYDMADONE 0x00000001 + +#define COMSTAT_MASK (REQMBXREAD | RSPMBXAVAIL | \ + CSBUFPERR | OVLYERR | CSERR |\ + OVLYDMADONE) + +#define COMSTATEN (REG_BASE_ADDR + 0x08) + +#define EN_REQMBXREAD 0x00000040 +#define EN_RSPMBXAVAIL 0x00000020 +#define EN_CSBUFPERR 0x00000008 +#define EN_OVLYERR 0x00000004 +#define EN_CSERR 0x00000002 +#define EN_OVLYDONE 0x00000001 + +#define SCBPRO (REG_BASE_ADDR + 0x0C) + +#define SCBCONS_MASK 0xFFFF0000 +#define SCBPRO_MASK 0x0000FFFF + +#define CHIMREQMBX (REG_BASE_ADDR + 0x10) + +#define CHIMRSPMBX (REG_BASE_ADDR + 0x14) + +#define CHIMINT (REG_BASE_ADDR + 0x18) + +#define EXT_INT0 0x00000800 +#define EXT_INT1 0x00000400 +#define PORRSTDET 0x00000200 +#define HARDRSTDET 0x00000100 +#define DLAVAILQ 0x00000080 /* ro */ +#define HOSTERR 0x00000040 +#define INITERR 0x00000020 +#define DEVINT 0x00000010 +#define COMINT 0x00000008 +#define DEVTIMER2 0x00000004 +#define DEVTIMER1 0x00000002 +#define DLAVAIL 0x00000001 + +#define CHIMINT_MASK (HOSTERR | INITERR | DEVINT | COMINT |\ + DEVTIMER2 | DEVTIMER1 | DLAVAIL) + +#define DEVEXCEPT_MASK (HOSTERR | INITERR | DEVINT | COMINT) + +#define CHIMINTEN (REG_BASE_ADDR + 0x1C) + +#define RST_EN_EXT_INT1 0x01000000 +#define RST_EN_EXT_INT0 0x00800000 +#define RST_EN_HOSTERR 0x00400000 +#define RST_EN_INITERR 0x00200000 +#define RST_EN_DEVINT 0x00100000 +#define RST_EN_COMINT 0x00080000 +#define RST_EN_DEVTIMER2 0x00040000 +#define RST_EN_DEVTIMER1 0x00020000 +#define RST_EN_DLAVAIL 0x00010000 +#define SET_EN_EXT_INT1 0x00000100 +#define SET_EN_EXT_INT0 0x00000080 +#define SET_EN_HOSTERR 0x00000040 +#define SET_EN_INITERR 0x00000020 +#define SET_EN_DEVINT 0x00000010 +#define SET_EN_COMINT 0x00000008 +#define SET_EN_DEVTIMER2 0x00000004 +#define SET_EN_DEVTIMER1 0x00000002 +#define SET_EN_DLAVAIL 0x00000001 + +#define RST_CHIMINTEN (RST_EN_HOSTERR | RST_EN_INITERR | \ + RST_EN_DEVINT | RST_EN_COMINT | \ + RST_EN_DEVTIMER2 | RST_EN_DEVTIMER1 |\ + RST_EN_DLAVAIL) + +#define SET_CHIMINTEN (SET_EN_HOSTERR | SET_EN_INITERR |\ + SET_EN_DEVINT | SET_EN_COMINT |\ + SET_EN_DLAVAIL) + +#define OVLYDMACTL (REG_BASE_ADDR + 0x20) + +#define OVLYADR_MASK 0x07FF0000 +#define OVLYLSEQ_MASK 0x0000FF00 +#define OVLYCSEQ 0x00000080 +#define OVLYHALTERR 0x00000040 +#define PIOCMODE 0x00000020 +#define RESETOVLYDMA 0x00000008 /* wo */ +#define STARTOVLYDMA 0x00000004 +#define STOPOVLYDMA 0x00000002 /* wo */ +#define OVLYDMAACT 0x00000001 /* ro */ + +#define OVLYDMACNT (REG_BASE_ADDR + 0x24) + +#define OVLYDOMAIN1 0x20000000 /* ro */ +#define OVLYDOMAIN0 0x10000000 +#define OVLYBUFADR_MASK 0x007F0000 +#define OVLYDMACNT_MASK 0x00003FFF + +#define OVLYDMAADR (REG_BASE_ADDR + 0x28) + +#define DMAERR (REG_BASE_ADDR + 0x30) + +#define OVLYERRSTAT_MASK 0x0000FF00 /* ro */ +#define CSERRSTAT_MASK 0x000000FF /* ro */ + +#define SPIODATA (REG_BASE_ADDR + 0x34) + +/* 0x38 - 0x3C are reserved */ + +#define T1CNTRLR (REG_BASE_ADDR + 0x40) + +#define T1DONE 0x00010000 /* ro */ +#define TIMER64 0x00000400 +#define T1ENABLE 0x00000200 +#define T1RELOAD 0x00000100 +#define T1PRESCALER_MASK 0x00000003 + +#define T1CMPR (REG_BASE_ADDR + 0x44) + +#define T1CNTR (REG_BASE_ADDR + 0x48) + +#define T2CNTRLR (REG_BASE_ADDR + 0x4C) + +#define T2DONE 0x00010000 /* ro */ +#define T2ENABLE 0x00000200 +#define T2RELOAD 0x00000100 +#define T2PRESCALER_MASK 0x00000003 + +#define T2CMPR (REG_BASE_ADDR + 0x50) + +#define T2CNTR (REG_BASE_ADDR + 0x54) + +/* 0x58h - 0xFCh are reserved */ + +/* + * DCH_SAS Registers, Address Range : (0x800-0xFFF) + */ +#define CMDCTXBASE (REG_BASE_ADDR + 0x800) + +#define DEVCTXBASE (REG_BASE_ADDR + 0x808) + +#define CTXDOMAIN (REG_BASE_ADDR + 0x810) + +#define DEVCTXDOMAIN1 0x00000008 /* ro */ +#define DEVCTXDOMAIN0 0x00000004 +#define CMDCTXDOMAIN1 0x00000002 /* ro */ +#define CMDCTXDOMAIN0 0x00000001 + +#define DCHCTL (REG_BASE_ADDR + 0x814) + +#define OCMBISTREPAIR 0x00080000 +#define OCMBISTEN 0x00040000 +#define OCMBISTDN 0x00020000 /* ro */ +#define OCMBISTFAIL 0x00010000 /* ro */ +#define DDBBISTEN 0x00004000 +#define DDBBISTDN 0x00002000 /* ro */ +#define DDBBISTFAIL 0x00001000 /* ro */ +#define SCBBISTEN 0x00000400 +#define SCBBISTDN 0x00000200 /* ro */ +#define SCBBISTFAIL 0x00000100 /* ro */ + +#define MEMSEL_MASK 0x000000E0 +#define MEMSEL_CCM_LSEQ 0x00000000 +#define MEMSEL_CCM_IOP 0x00000020 +#define MEMSEL_CCM_SASCTL 0x00000040 +#define MEMSEL_DCM_LSEQ 0x00000060 +#define MEMSEL_DCM_IOP 0x00000080 +#define MEMSEL_OCM 0x000000A0 + +#define FRCERR 0x00000010 +#define AUTORLS 0x00000001 + +#define DCHREVISION (REG_BASE_ADDR + 0x818) + +#define DCHREVISION_MASK 0x000000FF + +#define DCHSTATUS (REG_BASE_ADDR + 0x81C) + +#define EN_CFIFTOERR 0x00020000 +#define CFIFTOERR 0x00000200 +#define CSEQINT 0x00000100 /* ro */ +#define LSEQ7INT 0x00000080 /* ro */ +#define LSEQ6INT 0x00000040 /* ro */ +#define LSEQ5INT 0x00000020 /* ro */ +#define LSEQ4INT 0x00000010 /* ro */ +#define LSEQ3INT 0x00000008 /* ro */ +#define LSEQ2INT 0x00000004 /* ro */ +#define LSEQ1INT 0x00000002 /* ro */ +#define LSEQ0INT 0x00000001 /* ro */ + +#define LSEQINT_MASK (LSEQ7INT | LSEQ6INT | LSEQ5INT |\ + LSEQ4INT | LSEQ3INT | LSEQ2INT |\ + LSEQ1INT | LSEQ0INT) + +#define DCHDFIFDEBUG (REG_BASE_ADDR + 0x820) +#define ENFAIRMST 0x00FF0000 +#define DISWRMST9 0x00000200 +#define DISWRMST8 0x00000100 +#define DISRDMST 0x000000FF + +#define ATOMICSTATCTL (REG_BASE_ADDR + 0x824) +/* 8 bit wide */ +#define AUTOINC 0x80 +#define ATOMICERR 0x04 +#define ATOMICWIN 0x02 +#define ATOMICDONE 0x01 + + +#define ALTCIOADR (REG_BASE_ADDR + 0x828) +/* 16 bit; bits 8:0 define CIO addr space of CSEQ */ + +#define ASCBPTR (REG_BASE_ADDR + 0x82C) +/* 16 bit wide */ + +#define ADDBPTR (REG_BASE_ADDR + 0x82E) +/* 16 bit wide */ + +#define ANEWDATA (REG_BASE_ADDR + 0x830) +/* 16 bit */ + +#define AOLDDATA (REG_BASE_ADDR + 0x834) +/* 16 bit */ + +#define CTXACCESS (REG_BASE_ADDR + 0x838) +/* 32 bit */ + +/* 0x83Ch - 0xFFCh are reserved */ + +/* + * ARP2 External Processor Registers, Address Range : (0x00-0x1F) + */ +#define ARP2CTL 0x00 + +#define FRCSCRPERR 0x00040000 +#define FRCARP2PERR 0x00020000 +#define FRCARP2ILLOPC 0x00010000 +#define ENWAITTO 0x00008000 +#define PERRORDIS 0x00004000 +#define FAILDIS 0x00002000 +#define CIOPERRDIS 0x00001000 +#define BREAKEN3 0x00000800 +#define BREAKEN2 0x00000400 +#define BREAKEN1 0x00000200 +#define BREAKEN0 0x00000100 +#define EPAUSE 0x00000008 +#define PAUSED 0x00000004 /* ro */ +#define STEP 0x00000002 +#define ARP2RESET 0x00000001 /* wo */ + +#define ARP2INT 0x04 + +#define HALTCODE_MASK 0x00FF0000 /* ro */ +#define ARP2WAITTO 0x00000100 +#define ARP2HALTC 0x00000080 +#define ARP2ILLOPC 0x00000040 +#define ARP2PERR 0x00000020 +#define ARP2CIOPERR 0x00000010 +#define ARP2BREAK3 0x00000008 +#define ARP2BREAK2 0x00000004 +#define ARP2BREAK1 0x00000002 +#define ARP2BREAK0 0x00000001 + +#define ARP2INTEN 0x08 + +#define EN_ARP2WAITTO 0x00000100 +#define EN_ARP2HALTC 0x00000080 +#define EN_ARP2ILLOPC 0x00000040 +#define EN_ARP2PERR 0x00000020 +#define EN_ARP2CIOPERR 0x00000010 +#define EN_ARP2BREAK3 0x00000008 +#define EN_ARP2BREAK2 0x00000004 +#define EN_ARP2BREAK1 0x00000002 +#define EN_ARP2BREAK0 0x00000001 + +#define ARP2BREAKADR01 0x0C + +#define BREAKADR1_MASK 0x0FFF0000 +#define BREAKADR0_MASK 0x00000FFF + +#define ARP2BREAKADR23 0x10 + +#define BREAKADR3_MASK 0x0FFF0000 +#define BREAKADR2_MASK 0x00000FFF + +/* 0x14h - 0x1Ch are reserved */ + +/* + * ARP2 Registers, Address Range : (0x00-0x1F) + * The definitions have the same address offset for CSEQ and LmSEQ + * CIO Bus Registers. + */ +#define MODEPTR 0x00 + +#define DSTMODE 0xF0 +#define SRCMODE 0x0F + +#define ALTMODE 0x01 + +#define ALTDMODE 0xF0 +#define ALTSMODE 0x0F + +#define ATOMICXCHG 0x02 + +#define FLAG 0x04 + +#define INTCODE_MASK 0xF0 +#define ALTMODEV2 0x04 +#define CARRY_INT 0x02 +#define CARRY 0x01 + +#define ARP2INTCTL 0x05 + +#define PAUSEDIS 0x80 +#define RSTINTCTL 0x40 +#define POPALTMODE 0x08 +#define ALTMODEV 0x04 +#define INTMASK 0x02 +#define IRET 0x01 + +#define STACK 0x06 + +#define FUNCTION1 0x07 + +#define PRGMCNT 0x08 + +#define ACCUM 0x0A + +#define SINDEX 0x0C + +#define DINDEX 0x0E + +#define ALLONES 0x10 + +#define ALLZEROS 0x11 + +#define SINDIR 0x12 + +#define DINDIR 0x13 + +#define JUMLDIR 0x14 + +#define ARP2HALTCODE 0x15 + +#define CURRADDR 0x16 + +#define LASTADDR 0x18 + +#define NXTLADDR 0x1A + +#define DBGPORTPTR 0x1C + +#define DBGPORT 0x1D + +/* + * CIO Registers. + * The definitions have the same address offset for CSEQ and LmSEQ + * CIO Bus Registers. + */ +#define MnSCBPTR 0x20 + +#define MnDDBPTR 0x22 + +#define SCRATCHPAGE 0x24 + +#define MnSCRATCHPAGE 0x25 + +#define SCRATCHPAGESV 0x26 + +#define MnSCRATCHPAGESV 0x27 + +#define MnDMAERRS 0x46 + +#define MnSGDMAERRS 0x47 + +#define MnSGBUF 0x53 + +#define MnSGDMASTAT 0x5b + +#define MnDDMACTL 0x5c /* RAZOR.rspec.fm rev 1.5 is wrong */ + +#define MnDDMASTAT 0x5d /* RAZOR.rspec.fm rev 1.5 is wrong */ + +#define MnDDMAMODE 0x5e /* RAZOR.rspec.fm rev 1.5 is wrong */ + +#define MnDMAENG 0x60 + +#define MnPIPECTL 0x61 + +#define MnSGBADR 0x65 + +#define MnSCB_SITE 0x100 + +#define MnDDB_SITE 0x180 + +/* + * The common definitions below have the same address offset for both + * CSEQ and LmSEQ. + */ +#define BISTCTL0 0x4C + +#define BISTCTL1 0x50 + +#define MAPPEDSCR 0x800 + +/* + * CSEQ Host Register, Address Range : (0x000-0xFFC) + */ +#define CSEQ_HOST_REG_BASE_ADR 0xB8001000 + +#define CARP2CTL (CSEQ_HOST_REG_BASE_ADR + ARP2CTL) + +#define CARP2INT (CSEQ_HOST_REG_BASE_ADR + ARP2INT) + +#define CARP2INTEN (CSEQ_HOST_REG_BASE_ADR + ARP2INTEN) + +#define CARP2BREAKADR01 (CSEQ_HOST_REG_BASE_ADR+ARP2BREAKADR01) + +#define CARP2BREAKADR23 (CSEQ_HOST_REG_BASE_ADR+ARP2BREAKADR23) + +#define CBISTCTL (CSEQ_HOST_REG_BASE_ADR + BISTCTL1) + +#define CSEQRAMBISTEN 0x00000040 +#define CSEQRAMBISTDN 0x00000020 /* ro */ +#define CSEQRAMBISTFAIL 0x00000010 /* ro */ +#define CSEQSCRBISTEN 0x00000004 +#define CSEQSCRBISTDN 0x00000002 /* ro */ +#define CSEQSCRBISTFAIL 0x00000001 /* ro */ + +#define CMAPPEDSCR (CSEQ_HOST_REG_BASE_ADR + MAPPEDSCR) + +/* + * CSEQ CIO Bus Registers, Address Range : (0x0000-0x1FFC) + * 16 modes, each mode is 512 bytes. + * Unless specified, the register should valid for all modes. + */ +#define CSEQ_CIO_REG_BASE_ADR REG_BASE_ADDR_CSEQCIO + +#define CSEQm_CIO_REG(Mode, Reg) \ + (CSEQ_CIO_REG_BASE_ADR + \ + ((u32) (Mode) * CSEQ_MODE_PAGE_SIZE) + (u32) (Reg)) + +#define CMODEPTR (CSEQ_CIO_REG_BASE_ADR + MODEPTR) + +#define CALTMODE (CSEQ_CIO_REG_BASE_ADR + ALTMODE) + +#define CATOMICXCHG (CSEQ_CIO_REG_BASE_ADR + ATOMICXCHG) + +#define CFLAG (CSEQ_CIO_REG_BASE_ADR + FLAG) + +#define CARP2INTCTL (CSEQ_CIO_REG_BASE_ADR + ARP2INTCTL) + +#define CSTACK (CSEQ_CIO_REG_BASE_ADR + STACK) + +#define CFUNCTION1 (CSEQ_CIO_REG_BASE_ADR + FUNCTION1) + +#define CPRGMCNT (CSEQ_CIO_REG_BASE_ADR + PRGMCNT) + +#define CACCUM (CSEQ_CIO_REG_BASE_ADR + ACCUM) + +#define CSINDEX (CSEQ_CIO_REG_BASE_ADR + SINDEX) + +#define CDINDEX (CSEQ_CIO_REG_BASE_ADR + DINDEX) + +#define CALLONES (CSEQ_CIO_REG_BASE_ADR + ALLONES) + +#define CALLZEROS (CSEQ_CIO_REG_BASE_ADR + ALLZEROS) + +#define CSINDIR (CSEQ_CIO_REG_BASE_ADR + SINDIR) + +#define CDINDIR (CSEQ_CIO_REG_BASE_ADR + DINDIR) + +#define CJUMLDIR (CSEQ_CIO_REG_BASE_ADR + JUMLDIR) + +#define CARP2HALTCODE (CSEQ_CIO_REG_BASE_ADR + ARP2HALTCODE) + +#define CCURRADDR (CSEQ_CIO_REG_BASE_ADR + CURRADDR) + +#define CLASTADDR (CSEQ_CIO_REG_BASE_ADR + LASTADDR) + +#define CNXTLADDR (CSEQ_CIO_REG_BASE_ADR + NXTLADDR) + +#define CDBGPORTPTR (CSEQ_CIO_REG_BASE_ADR + DBGPORTPTR) + +#define CDBGPORT (CSEQ_CIO_REG_BASE_ADR + DBGPORT) + +#define CSCRATCHPAGE (CSEQ_CIO_REG_BASE_ADR + SCRATCHPAGE) + +#define CMnSCBPTR(Mode) CSEQm_CIO_REG(Mode, MnSCBPTR) + +#define CMnDDBPTR(Mode) CSEQm_CIO_REG(Mode, MnDDBPTR) + +#define CMnSCRATCHPAGE(Mode) CSEQm_CIO_REG(Mode, MnSCRATCHPAGE) + +#define CLINKCON (CSEQ_CIO_REG_BASE_ADR + 0x28) + +#define CCIOAACESS (CSEQ_CIO_REG_BASE_ADR + 0x2C) + +/* mode 0-7 */ +#define MnREQMBX 0x30 +#define CMnREQMBX(Mode) CSEQm_CIO_REG(Mode, 0x30) + +/* mode 8 */ +#define CSEQCON CSEQm_CIO_REG(8, 0x30) + +/* mode 0-7 */ +#define MnRSPMBX 0x34 +#define CMnRSPMBX(Mode) CSEQm_CIO_REG(Mode, 0x34) + +/* mode 8 */ +#define CSEQCOMCTL CSEQm_CIO_REG(8, 0x34) + +/* mode 8 */ +#define CSEQCOMSTAT CSEQm_CIO_REG(8, 0x35) + +/* mode 8 */ +#define CSEQCOMINTEN CSEQm_CIO_REG(8, 0x36) + +/* mode 8 */ +#define CSEQCOMDMACTL CSEQm_CIO_REG(8, 0x37) + +#define CSHALTERR 0x10 +#define RESETCSDMA 0x08 /* wo */ +#define STARTCSDMA 0x04 +#define STOPCSDMA 0x02 /* wo */ +#define CSDMAACT 0x01 /* ro */ + +/* mode 0-7 */ +#define MnINT 0x38 +#define CMnINT(Mode) CSEQm_CIO_REG(Mode, 0x38) + +#define CMnREQMBXE 0x02 +#define CMnRSPMBXF 0x01 +#define CMnINT_MASK 0x00000003 + +/* mode 8 */ +#define CSEQREQMBX CSEQm_CIO_REG(8, 0x38) + +/* mode 0-7 */ +#define MnINTEN 0x3C +#define CMnINTEN(Mode) CSEQm_CIO_REG(Mode, 0x3C) + +#define EN_CMnRSPMBXF 0x01 + +/* mode 8 */ +#define CSEQRSPMBX CSEQm_CIO_REG(8, 0x3C) + +/* mode 8 */ +#define CSDMAADR CSEQm_CIO_REG(8, 0x40) + +/* mode 8 */ +#define CSDMACNT CSEQm_CIO_REG(8, 0x48) + +/* mode 8 */ +#define CSEQDLCTL CSEQm_CIO_REG(8, 0x4D) + +#define DONELISTEND 0x10 +#define DONELISTSIZE_MASK 0x0F +#define DONELISTSIZE_8ELEM 0x01 +#define DONELISTSIZE_16ELEM 0x02 +#define DONELISTSIZE_32ELEM 0x03 +#define DONELISTSIZE_64ELEM 0x04 +#define DONELISTSIZE_128ELEM 0x05 +#define DONELISTSIZE_256ELEM 0x06 +#define DONELISTSIZE_512ELEM 0x07 +#define DONELISTSIZE_1024ELEM 0x08 +#define DONELISTSIZE_2048ELEM 0x09 +#define DONELISTSIZE_4096ELEM 0x0A +#define DONELISTSIZE_8192ELEM 0x0B +#define DONELISTSIZE_16384ELEM 0x0C + +/* mode 8 */ +#define CSEQDLOFFS CSEQm_CIO_REG(8, 0x4E) + +/* mode 11 */ +#define CM11INTVEC0 CSEQm_CIO_REG(11, 0x50) + +/* mode 11 */ +#define CM11INTVEC1 CSEQm_CIO_REG(11, 0x52) + +/* mode 11 */ +#define CM11INTVEC2 CSEQm_CIO_REG(11, 0x54) + +#define CCONMSK (CSEQ_CIO_REG_BASE_ADR + 0x60) + +#define CCONEXIST (CSEQ_CIO_REG_BASE_ADR + 0x61) + +#define CCONMODE (CSEQ_CIO_REG_BASE_ADR + 0x62) + +#define CTIMERCALC (CSEQ_CIO_REG_BASE_ADR + 0x64) + +#define CINTDIS (CSEQ_CIO_REG_BASE_ADR + 0x68) + +/* mode 8, 32x32 bits, 128 bytes of mapped buffer */ +#define CSBUFFER CSEQm_CIO_REG(8, 0x80) + +#define CSCRATCH (CSEQ_CIO_REG_BASE_ADR + 0x1C0) + +/* mode 0-8 */ +#define CMnSCRATCH(Mode) CSEQm_CIO_REG(Mode, 0x1E0) + +/* + * CSEQ Mapped Instruction RAM Page, Address Range : (0x0000-0x1FFC) + */ +#define CSEQ_RAM_REG_BASE_ADR 0xB8004000 + +/* + * The common definitions below have the same address offset for all the Link + * sequencers. + */ +#define MODECTL 0x40 + +#define DBGMODE 0x44 + +#define CONTROL 0x48 +#define LEDTIMER 0x00010000 +#define LEDTIMERS_10us 0x00000000 +#define LEDTIMERS_1ms 0x00000800 +#define LEDTIMERS_100ms 0x00001000 +#define LEDMODE_TXRX 0x00000000 +#define LEDMODE_CONNECTED 0x00000200 +#define LEDPOL 0x00000100 + +#define LSEQRAM 0x1000 + +/* + * LmSEQ Host Registers, Address Range : (0x0000-0x3FFC) + */ +#define LSEQ0_HOST_REG_BASE_ADR 0xB8020000 +#define LSEQ1_HOST_REG_BASE_ADR 0xB8024000 +#define LSEQ2_HOST_REG_BASE_ADR 0xB8028000 +#define LSEQ3_HOST_REG_BASE_ADR 0xB802C000 +#define LSEQ4_HOST_REG_BASE_ADR 0xB8030000 +#define LSEQ5_HOST_REG_BASE_ADR 0xB8034000 +#define LSEQ6_HOST_REG_BASE_ADR 0xB8038000 +#define LSEQ7_HOST_REG_BASE_ADR 0xB803C000 + +#define LmARP2CTL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ + ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \ + ARP2CTL) + +#define LmARP2INT(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ + ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \ + ARP2INT) + +#define LmARP2INTEN(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ + ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \ + ARP2INTEN) + +#define LmDBGMODE(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ + ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \ + DBGMODE) + +#define LmCONTROL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ + ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \ + CONTROL) + +#define LmARP2BREAKADR01(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ + ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \ + ARP2BREAKADR01) + +#define LmARP2BREAKADR23(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ + ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \ + ARP2BREAKADR23) + +#define LmMODECTL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ + ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \ + MODECTL) + +#define LmAUTODISCI 0x08000000 +#define LmDSBLBITLT 0x04000000 +#define LmDSBLANTT 0x02000000 +#define LmDSBLCRTT 0x01000000 +#define LmDSBLCONT 0x00000100 +#define LmPRIMODE 0x00000080 +#define LmDSBLHOLD 0x00000040 +#define LmDISACK 0x00000020 +#define LmBLIND48 0x00000010 +#define LmRCVMODE_MASK 0x0000000C +#define LmRCVMODE_PLD 0x00000000 +#define LmRCVMODE_HPC 0x00000004 + +#define LmDBGMODE(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ + ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \ + DBGMODE) + +#define LmFRCPERR 0x80000000 +#define LmMEMSEL_MASK 0x30000000 +#define LmFRCRBPERR 0x00000000 +#define LmFRCTBPERR 0x10000000 +#define LmFRCSGBPERR 0x20000000 +#define LmFRCARBPERR 0x30000000 +#define LmRCVIDW 0x00080000 +#define LmINVDWERR 0x00040000 +#define LmRCVDISP 0x00004000 +#define LmDISPERR 0x00002000 +#define LmDSBLDSCR 0x00000800 +#define LmDSBLSCR 0x00000400 +#define LmFRCNAK 0x00000200 +#define LmFRCROFS 0x00000100 +#define LmFRCCRC 0x00000080 +#define LmFRMTYPE_MASK 0x00000070 +#define LmSG_DATA 0x00000000 +#define LmSG_COMMAND 0x00000010 +#define LmSG_TASK 0x00000020 +#define LmSG_TGTXFER 0x00000030 +#define LmSG_RESPONSE 0x00000040 +#define LmSG_IDENADDR 0x00000050 +#define LmSG_OPENADDR 0x00000060 +#define LmDISCRCGEN 0x00000008 +#define LmDISCRCCHK 0x00000004 +#define LmSSXMTFRM 0x00000002 +#define LmSSRCVFRM 0x00000001 + +#define LmCONTROL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ + ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \ + CONTROL) + +#define LmSTEPXMTFRM 0x00000002 +#define LmSTEPRCVFRM 0x00000001 + +#define LmBISTCTL0(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ + ((LinkNum)*LmSEQ_HOST_REG_SIZE) + \ + BISTCTL0) + +#define ARBBISTEN 0x40000000 +#define ARBBISTDN 0x20000000 /* ro */ +#define ARBBISTFAIL 0x10000000 /* ro */ +#define TBBISTEN 0x00000400 +#define TBBISTDN 0x00000200 /* ro */ +#define TBBISTFAIL 0x00000100 /* ro */ +#define RBBISTEN 0x00000040 +#define RBBISTDN 0x00000020 /* ro */ +#define RBBISTFAIL 0x00000010 /* ro */ +#define SGBISTEN 0x00000004 +#define SGBISTDN 0x00000002 /* ro */ +#define SGBISTFAIL 0x00000001 /* ro */ + +#define LmBISTCTL1(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ + ((LinkNum)*LmSEQ_HOST_REG_SIZE) +\ + BISTCTL1) + +#define LmRAMPAGE1 0x00000200 +#define LmRAMPAGE0 0x00000100 +#define LmIMEMBISTEN 0x00000040 +#define LmIMEMBISTDN 0x00000020 /* ro */ +#define LmIMEMBISTFAIL 0x00000010 /* ro */ +#define LmSCRBISTEN 0x00000004 +#define LmSCRBISTDN 0x00000002 /* ro */ +#define LmSCRBISTFAIL 0x00000001 /* ro */ +#define LmRAMPAGE (LmRAMPAGE1 + LmRAMPAGE0) +#define LmRAMPAGE_LSHIFT 0x8 + +#define LmSCRATCH(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ + ((LinkNum) * LmSEQ_HOST_REG_SIZE) +\ + MAPPEDSCR) + +#define LmSEQRAM(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \ + ((LinkNum) * LmSEQ_HOST_REG_SIZE) +\ + LSEQRAM) + +/* + * LmSEQ CIO Bus Register, Address Range : (0x0000-0xFFC) + * 8 modes, each mode is 512 bytes. + * Unless specified, the register should valid for all modes. + */ +#define LmSEQ_CIOBUS_REG_BASE 0x2000 + +#define LmSEQ_PHY_BASE(Mode, LinkNum) \ + (LSEQ0_HOST_REG_BASE_ADR + \ + (LmSEQ_HOST_REG_SIZE * (u32) (LinkNum)) + \ + LmSEQ_CIOBUS_REG_BASE + \ + ((u32) (Mode) * LmSEQ_MODE_PAGE_SIZE)) + +#define LmSEQ_PHY_REG(Mode, LinkNum, Reg) \ + (LmSEQ_PHY_BASE(Mode, LinkNum) + (u32) (Reg)) + +#define LmMODEPTR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, MODEPTR) + +#define LmALTMODE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ALTMODE) + +#define LmATOMICXCHG(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ATOMICXCHG) + +#define LmFLAG(LinkNum) LmSEQ_PHY_REG(0, LinkNum, FLAG) + +#define LmARP2INTCTL(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ARP2INTCTL) + +#define LmSTACK(LinkNum) LmSEQ_PHY_REG(0, LinkNum, STACK) + +#define LmFUNCTION1(LinkNum) LmSEQ_PHY_REG(0, LinkNum, FUNCTION1) + +#define LmPRGMCNT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, PRGMCNT) + +#define LmACCUM(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ACCUM) + +#define LmSINDEX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, SINDEX) + +#define LmDINDEX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DINDEX) + +#define LmALLONES(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ALLONES) + +#define LmALLZEROS(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ALLZEROS) + +#define LmSINDIR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, SINDIR) + +#define LmDINDIR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DINDIR) + +#define LmJUMLDIR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, JUMLDIR) + +#define LmARP2HALTCODE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ARP2HALTCODE) + +#define LmCURRADDR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, CURRADDR) + +#define LmLASTADDR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, LASTADDR) + +#define LmNXTLADDR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, NXTLADDR) + +#define LmDBGPORTPTR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DBGPORTPTR) + +#define LmDBGPORT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DBGPORT) + +#define LmSCRATCHPAGE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, SCRATCHPAGE) + +#define LmMnSCRATCHPAGE(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, \ + MnSCRATCHPAGE) + +#define LmTIMERCALC(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x28) + +#define LmREQMBX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x30) + +#define LmRSPMBX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x34) + +#define LmMnINT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x38) + +#define CTXMEMSIZE 0x80000000 /* ro */ +#define LmACKREQ 0x08000000 +#define LmNAKREQ 0x04000000 +#define LmMnXMTERR 0x02000000 +#define LmM5OOBSVC 0x01000000 +#define LmHWTINT 0x00800000 +#define LmMnCTXDONE 0x00100000 +#define LmM2REQMBXF 0x00080000 +#define LmM2RSPMBXE 0x00040000 +#define LmMnDMAERR 0x00020000 +#define LmRCVPRIM 0x00010000 +#define LmRCVERR 0x00008000 +#define LmADDRRCV 0x00004000 +#define LmMnHDRMISS 0x00002000 +#define LmMnWAITSCB 0x00001000 +#define LmMnRLSSCB 0x00000800 +#define LmMnSAVECTX 0x00000400 +#define LmMnFETCHSG 0x00000200 +#define LmMnLOADCTX 0x00000100 +#define LmMnCFGICL 0x00000080 +#define LmMnCFGSATA 0x00000040 +#define LmMnCFGEXPSATA 0x00000020 +#define LmMnCFGCMPLT 0x00000010 +#define LmMnCFGRBUF 0x00000008 +#define LmMnSAVETTR 0x00000004 +#define LmMnCFGRDAT 0x00000002 +#define LmMnCFGHDR 0x00000001 + +#define LmMnINTEN(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x3C) + +#define EN_LmACKREQ 0x08000000 +#define EN_LmNAKREQ 0x04000000 +#define EN_LmMnXMTERR 0x02000000 +#define EN_LmM5OOBSVC 0x01000000 +#define EN_LmHWTINT 0x00800000 +#define EN_LmMnCTXDONE 0x00100000 +#define EN_LmM2REQMBXF 0x00080000 +#define EN_LmM2RSPMBXE 0x00040000 +#define EN_LmMnDMAERR 0x00020000 +#define EN_LmRCVPRIM 0x00010000 +#define EN_LmRCVERR 0x00008000 +#define EN_LmADDRRCV 0x00004000 +#define EN_LmMnHDRMISS 0x00002000 +#define EN_LmMnWAITSCB 0x00001000 +#define EN_LmMnRLSSCB 0x00000800 +#define EN_LmMnSAVECTX 0x00000400 +#define EN_LmMnFETCHSG 0x00000200 +#define EN_LmMnLOADCTX 0x00000100 +#define EN_LmMnCFGICL 0x00000080 +#define EN_LmMnCFGSATA 0x00000040 +#define EN_LmMnCFGEXPSATA 0x00000020 +#define EN_LmMnCFGCMPLT 0x00000010 +#define EN_LmMnCFGRBUF 0x00000008 +#define EN_LmMnSAVETTR 0x00000004 +#define EN_LmMnCFGRDAT 0x00000002 +#define EN_LmMnCFGHDR 0x00000001 + +#define LmM0INTEN_MASK (EN_LmMnCFGCMPLT | EN_LmMnCFGRBUF | \ + EN_LmMnSAVETTR | EN_LmMnCFGRDAT | \ + EN_LmMnCFGHDR | EN_LmRCVERR | \ + EN_LmADDRRCV | EN_LmMnHDRMISS | \ + EN_LmMnRLSSCB | EN_LmMnSAVECTX | \ + EN_LmMnFETCHSG | EN_LmMnLOADCTX | \ + EN_LmHWTINT | EN_LmMnCTXDONE | \ + EN_LmRCVPRIM | EN_LmMnCFGSATA | \ + EN_LmMnCFGEXPSATA | EN_LmMnDMAERR) + +#define LmM1INTEN_MASK (EN_LmMnCFGCMPLT | EN_LmADDRRCV | \ + EN_LmMnRLSSCB | EN_LmMnSAVECTX | \ + EN_LmMnFETCHSG | EN_LmMnLOADCTX | \ + EN_LmMnXMTERR | EN_LmHWTINT | \ + EN_LmMnCTXDONE | EN_LmRCVPRIM | \ + EN_LmRCVERR | EN_LmMnDMAERR) + +#define LmM2INTEN_MASK (EN_LmADDRRCV | EN_LmHWTINT | \ + EN_LmM2REQMBXF | EN_LmRCVPRIM | \ + EN_LmRCVERR) + +#define LmM5INTEN_MASK (EN_LmADDRRCV | EN_LmM5OOBSVC | \ + EN_LmHWTINT | EN_LmRCVPRIM | \ + EN_LmRCVERR) + +#define LmXMTPRIMD(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x40) + +#define LmXMTPRIMCS(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x44) + +#define LmCONSTAT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x45) + +#define LmMnDMAERRS(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x46) + +#define LmMnSGDMAERRS(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x47) + +#define LmM0EXPHDRP(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x48) + +#define LmM1SASALIGN(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x48) +#define SAS_ALIGN_DEFAULT 0xFF + +#define LmM0MSKHDRP(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x49) + +#define LmM1STPALIGN(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x49) +#define STP_ALIGN_DEFAULT 0x1F + +#define LmM0RCVHDRP(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x4A) + +#define LmM1XMTHDRP(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x4A) + +#define LmM0ICLADR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x4B) + +#define LmM1ALIGNMODE(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x4B) + +#define LmDISALIGN 0x20 +#define LmROTSTPALIGN 0x10 +#define LmSTPALIGN 0x08 +#define LmROTNOTIFY 0x04 +#define LmDUALALIGN 0x02 +#define LmROTALIGN 0x01 + +#define LmM0EXPRCVNT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x4C) + +#define LmM1XMTCNT(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x4C) + +#define LmMnBUFSTAT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x4E) + +#define LmMnBUFPERR 0x01 + +/* mode 0-1 */ +#define LmMnXFRLVL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x59) + +#define LmMnXFRLVL_128 0x05 +#define LmMnXFRLVL_256 0x04 +#define LmMnXFRLVL_512 0x03 +#define LmMnXFRLVL_1024 0x02 +#define LmMnXFRLVL_1536 0x01 +#define LmMnXFRLVL_2048 0x00 + + /* mode 0-1 */ +#define LmMnSGDMACTL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5A) + +#define LmMnRESETSG 0x04 +#define LmMnSTOPSG 0x02 +#define LmMnSTARTSG 0x01 + +/* mode 0-1 */ +#define LmMnSGDMASTAT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5B) + +/* mode 0-1 */ +#define LmMnDDMACTL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5C) + +#define LmMnFLUSH 0x40 /* wo */ +#define LmMnRLSRTRY 0x20 /* wo */ +#define LmMnDISCARD 0x10 /* wo */ +#define LmMnRESETDAT 0x08 /* wo */ +#define LmMnSUSDAT 0x04 /* wo */ +#define LmMnSTOPDAT 0x02 /* wo */ +#define LmMnSTARTDAT 0x01 /* wo */ + +/* mode 0-1 */ +#define LmMnDDMASTAT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5D) + +#define LmMnDPEMPTY 0x80 +#define LmMnFLUSHING 0x40 +#define LmMnDDMAREQ 0x20 +#define LmMnHDMAREQ 0x10 +#define LmMnDATFREE 0x08 +#define LmMnDATSUS 0x04 +#define LmMnDATACT 0x02 +#define LmMnDATEN 0x01 + +/* mode 0-1 */ +#define LmMnDDMAMODE(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5E) + +#define LmMnDMATYPE_NORMAL 0x0000 +#define LmMnDMATYPE_HOST_ONLY_TX 0x0001 +#define LmMnDMATYPE_DEVICE_ONLY_TX 0x0002 +#define LmMnDMATYPE_INVALID 0x0003 +#define LmMnDMATYPE_MASK 0x0003 + +#define LmMnDMAWRAP 0x0004 +#define LmMnBITBUCKET 0x0008 +#define LmMnDISHDR 0x0010 +#define LmMnSTPCRC 0x0020 +#define LmXTEST 0x0040 +#define LmMnDISCRC 0x0080 +#define LmMnENINTLK 0x0100 +#define LmMnADDRFRM 0x0400 +#define LmMnENXMTCRC 0x0800 + +/* mode 0-1 */ +#define LmMnXFRCNT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x70) + +/* mode 0-1 */ +#define LmMnDPSEL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x7B) +#define LmMnDPSEL_MASK 0x07 +#define LmMnEOLPRE 0x40 +#define LmMnEOSPRE 0x80 + +/* Registers used in conjunction with LmMnDPSEL and LmMnDPACC registers */ +/* Receive Mode n = 0 */ +#define LmMnHRADDR 0x00 +#define LmMnHBYTECNT 0x01 +#define LmMnHREWIND 0x02 +#define LmMnDWADDR 0x03 +#define LmMnDSPACECNT 0x04 +#define LmMnDFRMSIZE 0x05 + +/* Registers used in conjunction with LmMnDPSEL and LmMnDPACC registers */ +/* Transmit Mode n = 1 */ +#define LmMnHWADDR 0x00 +#define LmMnHSPACECNT 0x01 +/* #define LmMnHREWIND 0x02 */ +#define LmMnDRADDR 0x03 +#define LmMnDBYTECNT 0x04 +/* #define LmMnDFRMSIZE 0x05 */ + +/* mode 0-1 */ +#define LmMnDPACC(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x78) +#define LmMnDPACC_MASK 0x00FFFFFF + +/* mode 0-1 */ +#define LmMnHOLDLVL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x7D) + +#define LmPRMSTAT0(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x80) +#define LmPRMSTAT0BYTE0 0x80 +#define LmPRMSTAT0BYTE1 0x81 +#define LmPRMSTAT0BYTE2 0x82 +#define LmPRMSTAT0BYTE3 0x83 + +#define LmFRAMERCVD 0x80000000 +#define LmXFRRDYRCVD 0x40000000 +#define LmUNKNOWNP 0x20000000 +#define LmBREAK 0x10000000 +#define LmDONE 0x08000000 +#define LmOPENACPT 0x04000000 +#define LmOPENRJCT 0x02000000 +#define LmOPENRTRY 0x01000000 +#define LmCLOSERV1 0x00800000 +#define LmCLOSERV0 0x00400000 +#define LmCLOSENORM 0x00200000 +#define LmCLOSECLAF 0x00100000 +#define LmNOTIFYRV2 0x00080000 +#define LmNOTIFYRV1 0x00040000 +#define LmNOTIFYRV0 0x00020000 +#define LmNOTIFYSPIN 0x00010000 +#define LmBROADRV4 0x00008000 +#define LmBROADRV3 0x00004000 +#define LmBROADRV2 0x00002000 +#define LmBROADRV1 0x00001000 +#define LmBROADSES 0x00000800 +#define LmBROADRVCH1 0x00000400 +#define LmBROADRVCH0 0x00000200 +#define LmBROADCH 0x00000100 +#define LmAIPRVWP 0x00000080 +#define LmAIPWP 0x00000040 +#define LmAIPWD 0x00000020 +#define LmAIPWC 0x00000010 +#define LmAIPRV2 0x00000008 +#define LmAIPRV1 0x00000004 +#define LmAIPRV0 0x00000002 +#define LmAIPNRML 0x00000001 + +#define LmBROADCAST_MASK (LmBROADCH | LmBROADRVCH0 | \ + LmBROADRVCH1) + +#define LmPRMSTAT1(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x84) +#define LmPRMSTAT1BYTE0 0x84 +#define LmPRMSTAT1BYTE1 0x85 +#define LmPRMSTAT1BYTE2 0x86 +#define LmPRMSTAT1BYTE3 0x87 + +#define LmFRMRCVDSTAT 0x80000000 +#define LmBREAK_DET 0x04000000 +#define LmCLOSE_DET 0x02000000 +#define LmDONE_DET 0x01000000 +#define LmXRDY 0x00040000 +#define LmSYNCSRST 0x00020000 +#define LmSYNC 0x00010000 +#define LmXHOLD 0x00008000 +#define LmRRDY 0x00004000 +#define LmHOLD 0x00002000 +#define LmROK 0x00001000 +#define LmRIP 0x00000800 +#define LmCRBLK 0x00000400 +#define LmACK 0x00000200 +#define LmNAK 0x00000100 +#define LmHARDRST 0x00000080 +#define LmERROR 0x00000040 +#define LmRERR 0x00000020 +#define LmPMREQP 0x00000010 +#define LmPMREQS 0x00000008 +#define LmPMACK 0x00000004 +#define LmPMNAK 0x00000002 +#define LmDMAT 0x00000001 + +/* mode 1 */ +#define LmMnSATAFS(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x7E) +#define LmMnXMTSIZE(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x93) + +/* mode 0 */ +#define LmMnFRMERR(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0xB0) + +#define LmACRCERR 0x00000800 +#define LmPHYOVRN 0x00000400 +#define LmOBOVRN 0x00000200 +#define LmMnZERODATA 0x00000100 +#define LmSATAINTLK 0x00000080 +#define LmMnCRCERR 0x00000020 +#define LmRRDYOVRN 0x00000010 +#define LmMISSSOAF 0x00000008 +#define LmMISSSOF 0x00000004 +#define LmMISSEOAF 0x00000002 +#define LmMISSEOF 0x00000001 + +#define LmFRMERREN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xB4) + +#define EN_LmACRCERR 0x00000800 +#define EN_LmPHYOVRN 0x00000400 +#define EN_LmOBOVRN 0x00000200 +#define EN_LmMnZERODATA 0x00000100 +#define EN_LmSATAINTLK 0x00000080 +#define EN_LmFRMBAD 0x00000040 +#define EN_LmMnCRCERR 0x00000020 +#define EN_LmRRDYOVRN 0x00000010 +#define EN_LmMISSSOAF 0x00000008 +#define EN_LmMISSSOF 0x00000004 +#define EN_LmMISSEOAF 0x00000002 +#define EN_LmMISSEOF 0x00000001 + +#define LmFRMERREN_MASK (EN_LmSATAINTLK | EN_LmMnCRCERR | \ + EN_LmRRDYOVRN | EN_LmMISSSOF | \ + EN_LmMISSEOAF | EN_LmMISSEOF | \ + EN_LmACRCERR | LmPHYOVRN | \ + EN_LmOBOVRN | EN_LmMnZERODATA) + +#define LmHWTSTATEN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xC5) + +#define EN_LmDONETO 0x80 +#define EN_LmINVDISP 0x40 +#define EN_LmINVDW 0x20 +#define EN_LmDWSEVENT 0x08 +#define EN_LmCRTTTO 0x04 +#define EN_LmANTTTO 0x02 +#define EN_LmBITLTTO 0x01 + +#define LmHWTSTATEN_MASK (EN_LmINVDISP | EN_LmINVDW | \ + EN_LmDWSEVENT | EN_LmCRTTTO | \ + EN_LmANTTTO | EN_LmDONETO | \ + EN_LmBITLTTO) + +#define LmHWTSTAT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xC7) + +#define LmDONETO 0x80 +#define LmINVDISP 0x40 +#define LmINVDW 0x20 +#define LmDWSEVENT 0x08 +#define LmCRTTTO 0x04 +#define LmANTTTO 0x02 +#define LmBITLTTO 0x01 + +#define LmMnDATABUFADR(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0xC8) +#define LmDATABUFADR_MASK 0x0FFF + +#define LmMnDATABUF(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0xCA) + +#define LmPRIMSTAT0EN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xE0) + +#define EN_LmUNKNOWNP 0x20000000 +#define EN_LmBREAK 0x10000000 +#define EN_LmDONE 0x08000000 +#define EN_LmOPENACPT 0x04000000 +#define EN_LmOPENRJCT 0x02000000 +#define EN_LmOPENRTRY 0x01000000 +#define EN_LmCLOSERV1 0x00800000 +#define EN_LmCLOSERV0 0x00400000 +#define EN_LmCLOSENORM 0x00200000 +#define EN_LmCLOSECLAF 0x00100000 +#define EN_LmNOTIFYRV2 0x00080000 +#define EN_LmNOTIFYRV1 0x00040000 +#define EN_LmNOTIFYRV0 0x00020000 +#define EN_LmNOTIFYSPIN 0x00010000 +#define EN_LmBROADRV4 0x00008000 +#define EN_LmBROADRV3 0x00004000 +#define EN_LmBROADRV2 0x00002000 +#define EN_LmBROADRV1 0x00001000 +#define EN_LmBROADRV0 0x00000800 +#define EN_LmBROADRVCH1 0x00000400 +#define EN_LmBROADRVCH0 0x00000200 +#define EN_LmBROADCH 0x00000100 +#define EN_LmAIPRVWP 0x00000080 +#define EN_LmAIPWP 0x00000040 +#define EN_LmAIPWD 0x00000020 +#define EN_LmAIPWC 0x00000010 +#define EN_LmAIPRV2 0x00000008 +#define EN_LmAIPRV1 0x00000004 +#define EN_LmAIPRV0 0x00000002 +#define EN_LmAIPNRML 0x00000001 + +#define LmPRIMSTAT0EN_MASK (EN_LmBREAK | \ + EN_LmDONE | EN_LmOPENACPT | \ + EN_LmOPENRJCT | EN_LmOPENRTRY | \ + EN_LmCLOSERV1 | EN_LmCLOSERV0 | \ + EN_LmCLOSENORM | EN_LmCLOSECLAF | \ + EN_LmBROADRV4 | EN_LmBROADRV3 | \ + EN_LmBROADRV2 | EN_LmBROADRV1 | \ + EN_LmBROADRV0 | EN_LmBROADRVCH1 | \ + EN_LmBROADRVCH0 | EN_LmBROADCH | \ + EN_LmAIPRVWP | EN_LmAIPWP | \ + EN_LmAIPWD | EN_LmAIPWC | \ + EN_LmAIPRV2 | EN_LmAIPRV1 | \ + EN_LmAIPRV0 | EN_LmAIPNRML) + +#define LmPRIMSTAT1EN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xE4) + +#define EN_LmXRDY 0x00040000 +#define EN_LmSYNCSRST 0x00020000 +#define EN_LmSYNC 0x00010000 +#define EN_LmXHOLD 0x00008000 +#define EN_LmRRDY 0x00004000 +#define EN_LmHOLD 0x00002000 +#define EN_LmROK 0x00001000 +#define EN_LmRIP 0x00000800 +#define EN_LmCRBLK 0x00000400 +#define EN_LmACK 0x00000200 +#define EN_LmNAK 0x00000100 +#define EN_LmHARDRST 0x00000080 +#define EN_LmERROR 0x00000040 +#define EN_LmRERR 0x00000020 +#define EN_LmPMREQP 0x00000010 +#define EN_LmPMREQS 0x00000008 +#define EN_LmPMACK 0x00000004 +#define EN_LmPMNAK 0x00000002 +#define EN_LmDMAT 0x00000001 + +#define LmPRIMSTAT1EN_MASK (EN_LmHARDRST | \ + EN_LmSYNCSRST | \ + EN_LmPMREQP | EN_LmPMREQS | \ + EN_LmPMACK | EN_LmPMNAK) + +#define LmSMSTATE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xE8) + +#define LmSMSTATEBRK(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xEC) + +#define LmSMDBGCTL(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xF0) + + +/* + * LmSEQ CIO Bus Mode 3 Register. + * Mode 3: Configuration and Setup, IOP Context SCB. + */ +#define LmM3SATATIMER(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x48) + +#define LmM3INTVEC0(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x90) + +#define LmM3INTVEC1(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x92) + +#define LmM3INTVEC2(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x94) + +#define LmM3INTVEC3(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x96) + +#define LmM3INTVEC4(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x98) + +#define LmM3INTVEC5(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x9A) + +#define LmM3INTVEC6(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x9C) + +#define LmM3INTVEC7(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x9E) + +#define LmM3INTVEC8(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xA4) + +#define LmM3INTVEC9(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xA6) + +#define LmM3INTVEC10(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xB0) + +#define LmM3FRMGAP(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xB4) + +#define LmBITL_TIMER(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xA2) + +#define LmWWN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xA8) + + +/* + * LmSEQ CIO Bus Mode 5 Registers. + * Mode 5: Phy/OOB Control and Status. + */ +#define LmSEQ_OOB_REG(phy_id, reg) LmSEQ_PHY_REG(5, (phy_id), (reg)) + +#define OOB_BFLTR 0x100 + +#define BFLTR_THR_MASK 0xF0 +#define BFLTR_TC_MASK 0x0F + +#define OOB_INIT_MIN 0x102 + +#define OOB_INIT_MAX 0x104 + +#define OOB_INIT_NEG 0x106 + +#define OOB_SAS_MIN 0x108 + +#define OOB_SAS_MAX 0x10A + +#define OOB_SAS_NEG 0x10C + +#define OOB_WAKE_MIN 0x10E + +#define OOB_WAKE_MAX 0x110 + +#define OOB_WAKE_NEG 0x112 + +#define OOB_IDLE_MAX 0x114 + +#define OOB_BURST_MAX 0x116 + +#define OOB_DATA_KBITS 0x126 + +#define OOB_ALIGN_0_DATA 0x12C + +#define OOB_ALIGN_1_DATA 0x130 + +#define D10_2_DATA_k 0x00 +#define SYNC_DATA_k 0x02 +#define ALIGN_1_DATA_k 0x04 +#define ALIGN_0_DATA_k 0x08 +#define BURST_DATA_k 0x10 + +#define OOB_PHY_RESET_COUNT 0x13C + +#define OOB_SIG_GEN 0x140 + +#define START_OOB 0x80 +#define START_DWS 0x40 +#define ALIGN_CNT3 0x30 +#define ALIGN_CNT2 0x20 +#define ALIGN_CNT1 0x10 +#define ALIGN_CNT4 0x00 +#define STOP_DWS 0x08 +#define SEND_COMSAS 0x04 +#define SEND_COMINIT 0x02 +#define SEND_COMWAKE 0x01 + +#define OOB_XMIT 0x141 + +#define TX_ENABLE 0x80 +#define XMIT_OOB_BURST 0x10 +#define XMIT_D10_2 0x08 +#define XMIT_SYNC 0x04 +#define XMIT_ALIGN_1 0x02 +#define XMIT_ALIGN_0 0x01 + +#define FUNCTION_MASK 0x142 + +#define SAS_MODE_DIS 0x80 +#define SATA_MODE_DIS 0x40 +#define SPINUP_HOLD_DIS 0x20 +#define HOT_PLUG_DIS 0x10 +#define SATA_PS_DIS 0x08 +#define FUNCTION_MASK_DEFAULT (SPINUP_HOLD_DIS | SATA_PS_DIS) + +#define OOB_MODE 0x143 + +#define SAS_MODE 0x80 +#define SATA_MODE 0x40 +#define SLOW_CLK 0x20 +#define FORCE_XMIT_15 0x08 +#define PHY_SPEED_60 0x04 +#define PHY_SPEED_30 0x02 +#define PHY_SPEED_15 0x01 + +#define CURRENT_STATUS 0x144 + +#define CURRENT_OOB_DONE 0x80 +#define CURRENT_LOSS_OF_SIGNAL 0x40 +#define CURRENT_SPINUP_HOLD 0x20 +#define CURRENT_HOT_PLUG_CNCT 0x10 +#define CURRENT_GTO_TIMEOUT 0x08 +#define CURRENT_OOB_TIMEOUT 0x04 +#define CURRENT_DEVICE_PRESENT 0x02 +#define CURRENT_OOB_ERROR 0x01 + +#define CURRENT_OOB1_ERROR (CURRENT_HOT_PLUG_CNCT | \ + CURRENT_GTO_TIMEOUT) + +#define CURRENT_OOB2_ERROR (CURRENT_HOT_PLUG_CNCT | \ + CURRENT_OOB_ERROR) + +#define DEVICE_ADDED_W_CNT (CURRENT_OOB_DONE | \ + CURRENT_HOT_PLUG_CNCT | \ + CURRENT_DEVICE_PRESENT) + +#define DEVICE_ADDED_WO_CNT (CURRENT_OOB_DONE | \ + CURRENT_DEVICE_PRESENT) + +#define DEVICE_REMOVED CURRENT_LOSS_OF_SIGNAL + +#define CURRENT_PHY_MASK (CURRENT_OOB_DONE | \ + CURRENT_LOSS_OF_SIGNAL | \ + CURRENT_SPINUP_HOLD | \ + CURRENT_HOT_PLUG_CNCT | \ + CURRENT_GTO_TIMEOUT | \ + CURRENT_DEVICE_PRESENT | \ + CURRENT_OOB_ERROR ) + +#define CURRENT_ERR_MASK (CURRENT_LOSS_OF_SIGNAL | \ + CURRENT_GTO_TIMEOUT | \ + CURRENT_OOB_TIMEOUT | \ + CURRENT_OOB_ERROR ) + +#define SPEED_MASK 0x145 + +#define SATA_SPEED_30_DIS 0x10 +#define SATA_SPEED_15_DIS 0x08 +#define SAS_SPEED_60_DIS 0x04 +#define SAS_SPEED_30_DIS 0x02 +#define SAS_SPEED_15_DIS 0x01 +#define SAS_SPEED_MASK_DEFAULT 0x00 + +#define OOB_TIMER_ENABLE 0x14D + +#define HOT_PLUG_EN 0x80 +#define RCD_EN 0x40 +#define COMTIMER_EN 0x20 +#define SNTT_EN 0x10 +#define SNLT_EN 0x04 +#define SNWT_EN 0x02 +#define ALIGN_EN 0x01 + +#define OOB_STATUS 0x14E + +#define OOB_DONE 0x80 +#define LOSS_OF_SIGNAL 0x40 /* ro */ +#define SPINUP_HOLD 0x20 +#define HOT_PLUG_CNCT 0x10 /* ro */ +#define GTO_TIMEOUT 0x08 /* ro */ +#define OOB_TIMEOUT 0x04 /* ro */ +#define DEVICE_PRESENT 0x02 /* ro */ +#define OOB_ERROR 0x01 /* ro */ + +#define OOB_STATUS_ERROR_MASK (LOSS_OF_SIGNAL | GTO_TIMEOUT | \ + OOB_TIMEOUT | OOB_ERROR) + +#define OOB_STATUS_CLEAR 0x14F + +#define OOB_DONE_CLR 0x80 +#define LOSS_OF_SIGNAL_CLR 0x40 +#define SPINUP_HOLD_CLR 0x20 +#define HOT_PLUG_CNCT_CLR 0x10 +#define GTO_TIMEOUT_CLR 0x08 +#define OOB_TIMEOUT_CLR 0x04 +#define OOB_ERROR_CLR 0x01 + +#define HOT_PLUG_DELAY 0x150 +/* In 5 ms units. 20 = 100 ms. */ +#define HOTPLUG_DELAY_TIMEOUT 20 + + +#define INT_ENABLE_2 0x15A + +#define OOB_DONE_EN 0x80 +#define LOSS_OF_SIGNAL_EN 0x40 +#define SPINUP_HOLD_EN 0x20 +#define HOT_PLUG_CNCT_EN 0x10 +#define GTO_TIMEOUT_EN 0x08 +#define OOB_TIMEOUT_EN 0x04 +#define DEVICE_PRESENT_EN 0x02 +#define OOB_ERROR_EN 0x01 + +#define PHY_CONTROL_0 0x160 + +#define PHY_LOWPWREN_TX 0x80 +#define PHY_LOWPWREN_RX 0x40 +#define SPARE_REG_160_B5 0x20 +#define OFFSET_CANCEL_RX 0x10 + +/* bits 3:2 */ +#define PHY_RXCOMCENTER_60V 0x00 +#define PHY_RXCOMCENTER_70V 0x04 +#define PHY_RXCOMCENTER_80V 0x08 +#define PHY_RXCOMCENTER_90V 0x0C +#define PHY_RXCOMCENTER_MASK 0x0C + +#define PHY_RESET 0x02 +#define SAS_DEFAULT_SEL 0x01 + +#define PHY_CONTROL_1 0x161 + +/* bits 2:0 */ +#define SATA_PHY_DETLEVEL_50mv 0x00 +#define SATA_PHY_DETLEVEL_75mv 0x01 +#define SATA_PHY_DETLEVEL_100mv 0x02 +#define SATA_PHY_DETLEVEL_125mv 0x03 +#define SATA_PHY_DETLEVEL_150mv 0x04 +#define SATA_PHY_DETLEVEL_175mv 0x05 +#define SATA_PHY_DETLEVEL_200mv 0x06 +#define SATA_PHY_DETLEVEL_225mv 0x07 +#define SATA_PHY_DETLEVEL_MASK 0x07 + +/* bits 5:3 */ +#define SAS_PHY_DETLEVEL_50mv 0x00 +#define SAS_PHY_DETLEVEL_75mv 0x08 +#define SAS_PHY_DETLEVEL_100mv 0x10 +#define SAS_PHY_DETLEVEL_125mv 0x11 +#define SAS_PHY_DETLEVEL_150mv 0x20 +#define SAS_PHY_DETLEVEL_175mv 0x21 +#define SAS_PHY_DETLEVEL_200mv 0x30 +#define SAS_PHY_DETLEVEL_225mv 0x31 +#define SAS_PHY_DETLEVEL_MASK 0x38 + +#define PHY_CONTROL_2 0x162 + +/* bits 7:5 */ +#define SATA_PHY_DRV_400mv 0x00 +#define SATA_PHY_DRV_450mv 0x20 +#define SATA_PHY_DRV_500mv 0x40 +#define SATA_PHY_DRV_550mv 0x60 +#define SATA_PHY_DRV_600mv 0x80 +#define SATA_PHY_DRV_650mv 0xA0 +#define SATA_PHY_DRV_725mv 0xC0 +#define SATA_PHY_DRV_800mv 0xE0 +#define SATA_PHY_DRV_MASK 0xE0 + +/* bits 4:3 */ +#define SATA_PREEMP_0 0x00 +#define SATA_PREEMP_1 0x08 +#define SATA_PREEMP_2 0x10 +#define SATA_PREEMP_3 0x18 +#define SATA_PREEMP_MASK 0x18 + +#define SATA_CMSH1P5 0x04 + +/* bits 1:0 */ +#define SATA_SLEW_0 0x00 +#define SATA_SLEW_1 0x01 +#define SATA_SLEW_2 0x02 +#define SATA_SLEW_3 0x03 +#define SATA_SLEW_MASK 0x03 + +#define PHY_CONTROL_3 0x163 + +/* bits 7:5 */ +#define SAS_PHY_DRV_400mv 0x00 +#define SAS_PHY_DRV_450mv 0x20 +#define SAS_PHY_DRV_500mv 0x40 +#define SAS_PHY_DRV_550mv 0x60 +#define SAS_PHY_DRV_600mv 0x80 +#define SAS_PHY_DRV_650mv 0xA0 +#define SAS_PHY_DRV_725mv 0xC0 +#define SAS_PHY_DRV_800mv 0xE0 +#define SAS_PHY_DRV_MASK 0xE0 + +/* bits 4:3 */ +#define SAS_PREEMP_0 0x00 +#define SAS_PREEMP_1 0x08 +#define SAS_PREEMP_2 0x10 +#define SAS_PREEMP_3 0x18 +#define SAS_PREEMP_MASK 0x18 + +#define SAS_CMSH1P5 0x04 + +/* bits 1:0 */ +#define SAS_SLEW_0 0x00 +#define SAS_SLEW_1 0x01 +#define SAS_SLEW_2 0x02 +#define SAS_SLEW_3 0x03 +#define SAS_SLEW_MASK 0x03 + +#define PHY_CONTROL_4 0x168 + +#define PHY_DONE_CAL_TX 0x80 +#define PHY_DONE_CAL_RX 0x40 +#define RX_TERM_LOAD_DIS 0x20 +#define TX_TERM_LOAD_DIS 0x10 +#define AUTO_TERM_CAL_DIS 0x08 +#define PHY_SIGDET_FLTR_EN 0x04 +#define OSC_FREQ 0x02 +#define PHY_START_CAL 0x01 + +/* + * HST_PCIX2 Registers, Addresss Range: (0x00-0xFC) + */ +#define PCIX_REG_BASE_ADR 0xB8040000 + +#define PCIC_VENDOR_ID 0x00 + +#define PCIC_DEVICE_ID 0x02 + +#define PCIC_COMMAND 0x04 + +#define INT_DIS 0x0400 +#define FBB_EN 0x0200 /* ro */ +#define SERR_EN 0x0100 +#define STEP_EN 0x0080 /* ro */ +#define PERR_EN 0x0040 +#define VGA_EN 0x0020 /* ro */ +#define MWI_EN 0x0010 +#define SPC_EN 0x0008 +#define MST_EN 0x0004 +#define MEM_EN 0x0002 +#define IO_EN 0x0001 + +#define PCIC_STATUS 0x06 + +#define PERR_DET 0x8000 +#define SERR_GEN 0x4000 +#define MABT_DET 0x2000 +#define TABT_DET 0x1000 +#define TABT_GEN 0x0800 +#define DPERR_DET 0x0100 +#define CAP_LIST 0x0010 +#define INT_STAT 0x0008 + +#define PCIC_DEVREV_ID 0x08 + +#define PCIC_CLASS_CODE 0x09 + +#define PCIC_CACHELINE_SIZE 0x0C + +#define PCIC_MBAR0 0x10 + +#define PCIC_MBAR0_OFFSET 0 + +#define PCIC_MBAR1 0x18 + +#define PCIC_MBAR1_OFFSET 2 + +#define PCIC_IOBAR 0x20 + +#define PCIC_IOBAR_OFFSET 4 + +#define PCIC_SUBVENDOR_ID 0x2C + +#define PCIC_SUBSYTEM_ID 0x2E + +#define PCIX_STATUS 0x44 +#define RCV_SCE 0x20000000 +#define UNEXP_SC 0x00080000 +#define SC_DISCARD 0x00040000 + +#define ECC_CTRL_STAT 0x48 +#define UNCOR_ECCERR 0x00000008 + +#define PCIC_PM_CSR 0x5C + +#define PWR_STATE_D0 0 +#define PWR_STATE_D1 1 /* not supported */ +#define PWR_STATE_D2 2 /* not supported */ +#define PWR_STATE_D3 3 + +#define PCIC_BASE1 0x6C /* internal use only */ + +#define BASE1_RSVD 0xFFFFFFF8 + +#define PCIC_BASEA 0x70 /* internal use only */ + +#define BASEA_RSVD 0xFFFFFFC0 +#define BASEA_START 0 + +#define PCIC_BASEB 0x74 /* internal use only */ + +#define BASEB_RSVD 0xFFFFFF80 +#define BASEB_IOMAP_MASK 0x7F +#define BASEB_START 0x80 + +#define PCIC_BASEC 0x78 /* internal use only */ + +#define BASEC_RSVD 0xFFFFFFFC +#define BASEC_MASK 0x03 +#define BASEC_START 0x58 + +#define PCIC_MBAR_KEY 0x7C /* internal use only */ + +#define MBAR_KEY_MASK 0xFFFFFFFF + +#define PCIC_HSTPCIX_CNTRL 0xA0 + +#define REWIND_DIS 0x0800 +#define SC_TMR_DIS 0x04000000 + +#define PCIC_MBAR0_MASK 0xA8 +#define PCIC_MBAR0_SIZE_MASK 0x1FFFE000 +#define PCIC_MBAR0_SIZE_SHIFT 13 +#define PCIC_MBAR0_SIZE(val) \ + (((val) & PCIC_MBAR0_SIZE_MASK) >> PCIC_MBAR0_SIZE_SHIFT) + +#define PCIC_FLASH_MBAR 0xB8 + +#define PCIC_INTRPT_STAT 0xD4 + +#define PCIC_TP_CTRL 0xFC + +/* + * EXSI Registers, Addresss Range: (0x00-0xFC) + */ +#define EXSI_REG_BASE_ADR REG_BASE_ADDR_EXSI + +#define EXSICNFGR (EXSI_REG_BASE_ADR + 0x00) + +#define OCMINITIALIZED 0x80000000 +#define ASIEN 0x00400000 +#define HCMODE 0x00200000 +#define PCIDEF 0x00100000 +#define COMSTOCK 0x00080000 +#define SEEPROMEND 0x00040000 +#define MSTTIMEN 0x00020000 +#define XREGEX 0x00000200 +#define NVRAMW 0x00000100 +#define NVRAMEX 0x00000080 +#define SRAMW 0x00000040 +#define SRAMEX 0x00000020 +#define FLASHW 0x00000010 +#define FLASHEX 0x00000008 +#define SEEPROMCFG 0x00000004 +#define SEEPROMTYP 0x00000002 +#define SEEPROMEX 0x00000001 + + +#define EXSICNTRLR (EXSI_REG_BASE_ADR + 0x04) + +#define MODINT_EN 0x00000001 + + +#define PMSTATR (EXSI_REG_BASE_ADR + 0x10) + +#define FLASHRST 0x00000002 +#define FLASHRDY 0x00000001 + + +#define FLCNFGR (EXSI_REG_BASE_ADR + 0x14) + +#define FLWEH_MASK 0x30000000 +#define FLWESU_MASK 0x0C000000 +#define FLWEPW_MASK 0x03F00000 +#define FLOEH_MASK 0x000C0000 +#define FLOESU_MASK 0x00030000 +#define FLOEPW_MASK 0x0000FC00 +#define FLCSH_MASK 0x00000300 +#define FLCSSU_MASK 0x000000C0 +#define FLCSPW_MASK 0x0000003F + +#define SRCNFGR (EXSI_REG_BASE_ADR + 0x18) + +#define SRWEH_MASK 0x30000000 +#define SRWESU_MASK 0x0C000000 +#define SRWEPW_MASK 0x03F00000 + +#define SROEH_MASK 0x000C0000 +#define SROESU_MASK 0x00030000 +#define SROEPW_MASK 0x0000FC00 +#define SRCSH_MASK 0x00000300 +#define SRCSSU_MASK 0x000000C0 +#define SRCSPW_MASK 0x0000003F + +#define NVCNFGR (EXSI_REG_BASE_ADR + 0x1C) + +#define NVWEH_MASK 0x30000000 +#define NVWESU_MASK 0x0C000000 +#define NVWEPW_MASK 0x03F00000 +#define NVOEH_MASK 0x000C0000 +#define NVOESU_MASK 0x00030000 +#define NVOEPW_MASK 0x0000FC00 +#define NVCSH_MASK 0x00000300 +#define NVCSSU_MASK 0x000000C0 +#define NVCSPW_MASK 0x0000003F + +#define XRCNFGR (EXSI_REG_BASE_ADR + 0x20) + +#define XRWEH_MASK 0x30000000 +#define XRWESU_MASK 0x0C000000 +#define XRWEPW_MASK 0x03F00000 +#define XROEH_MASK 0x000C0000 +#define XROESU_MASK 0x00030000 +#define XROEPW_MASK 0x0000FC00 +#define XRCSH_MASK 0x00000300 +#define XRCSSU_MASK 0x000000C0 +#define XRCSPW_MASK 0x0000003F + +#define XREGADDR (EXSI_REG_BASE_ADR + 0x24) + +#define XRADDRINCEN 0x80000000 +#define XREGADD_MASK 0x007FFFFF + + +#define XREGDATAR (EXSI_REG_BASE_ADR + 0x28) + +#define XREGDATA_MASK 0x0000FFFF + +#define GPIOOER (EXSI_REG_BASE_ADR + 0x40) + +#define GPIOODENR (EXSI_REG_BASE_ADR + 0x44) + +#define GPIOINVR (EXSI_REG_BASE_ADR + 0x48) + +#define GPIODATAOR (EXSI_REG_BASE_ADR + 0x4C) + +#define GPIODATAIR (EXSI_REG_BASE_ADR + 0x50) + +#define GPIOCNFGR (EXSI_REG_BASE_ADR + 0x54) + +#define GPIO_EXTSRC 0x00000001 + +#define SCNTRLR (EXSI_REG_BASE_ADR + 0xA0) + +#define SXFERDONE 0x00000100 +#define SXFERCNT_MASK 0x000000E0 +#define SCMDTYP_MASK 0x0000001C +#define SXFERSTART 0x00000002 +#define SXFEREN 0x00000001 + +#define SRATER (EXSI_REG_BASE_ADR + 0xA4) + +#define SADDRR (EXSI_REG_BASE_ADR + 0xA8) + +#define SADDR_MASK 0x0000FFFF + +#define SDATAOR (EXSI_REG_BASE_ADR + 0xAC) + +#define SDATAOR0 (EXSI_REG_BASE_ADR + 0xAC) +#define SDATAOR1 (EXSI_REG_BASE_ADR + 0xAD) +#define SDATAOR2 (EXSI_REG_BASE_ADR + 0xAE) +#define SDATAOR3 (EXSI_REG_BASE_ADR + 0xAF) + +#define SDATAIR (EXSI_REG_BASE_ADR + 0xB0) + +#define SDATAIR0 (EXSI_REG_BASE_ADR + 0xB0) +#define SDATAIR1 (EXSI_REG_BASE_ADR + 0xB1) +#define SDATAIR2 (EXSI_REG_BASE_ADR + 0xB2) +#define SDATAIR3 (EXSI_REG_BASE_ADR + 0xB3) + +#define ASISTAT0R (EXSI_REG_BASE_ADR + 0xD0) +#define ASIFMTERR 0x00000400 +#define ASISEECHKERR 0x00000200 +#define ASIERR 0x00000100 + +#define ASISTAT1R (EXSI_REG_BASE_ADR + 0xD4) +#define CHECKSUM_MASK 0x0000FFFF + +#define ASIERRADDR (EXSI_REG_BASE_ADR + 0xD8) +#define ASIERRDATAR (EXSI_REG_BASE_ADR + 0xDC) +#define ASIERRSTATR (EXSI_REG_BASE_ADR + 0xE0) +#define CPI2ASIBYTECNT_MASK 0x00070000 +#define CPI2ASIBYTEEN_MASK 0x0000F000 +#define CPI2ASITARGERR_MASK 0x00000F00 +#define CPI2ASITARGMID_MASK 0x000000F0 +#define CPI2ASIMSTERR_MASK 0x0000000F + +/* + * XSRAM, External SRAM (DWord and any BE pattern accessible) + */ +#define XSRAM_REG_BASE_ADDR 0xB8100000 +#define XSRAM_SIZE 0x100000 + +/* + * NVRAM Registers, Address Range: (0x00000 - 0x3FFFF). + */ +#define NVRAM_REG_BASE_ADR 0xBF800000 +#define NVRAM_MAX_BASE_ADR 0x003FFFFF + +/* OCM base address */ +#define OCM_BASE_ADDR 0xA0000000 +#define OCM_MAX_SIZE 0x20000 + +/* + * Sequencers (Central and Link) Scratch RAM page definitions. + */ + +/* + * The Central Management Sequencer (CSEQ) Scratch Memory is a 1024 + * byte memory. It is dword accessible and has byte parity + * protection. The CSEQ accesses it in 32 byte windows, either as mode + * dependent or mode independent memory. Each mode has 96 bytes, + * (three 32 byte pages 0-2, not contiguous), leaving 128 bytes of + * Mode Independent memory (four 32 byte pages 3-7). Note that mode + * dependent scratch memory, Mode 8, page 0-3 overlaps mode + * independent scratch memory, pages 0-3. + * - 896 bytes of mode dependent scratch, 96 bytes per Modes 0-7, and + * 128 bytes in mode 8, + * - 259 bytes of mode independent scratch, common to modes 0-15. + * + * Sequencer scratch RAM is 1024 bytes. This scratch memory is + * divided into mode dependent and mode independent scratch with this + * memory further subdivided into pages of size 32 bytes. There are 5 + * pages (160 bytes) of mode independent scratch and 3 pages of + * dependent scratch memory for modes 0-7 (768 bytes). Mode 8 pages + * 0-2 dependent scratch overlap with pages 0-2 of mode independent + * scratch memory. + * + * The host accesses this scratch in a different manner from the + * central sequencer. The sequencer has to use CSEQ registers CSCRPAGE + * and CMnSCRPAGE to access the scratch memory. A flat mapping of the + * scratch memory is avaliable for software convenience and to prevent + * corruption while the sequencer is running. This memory is mapped + * onto addresses 800h - BFFh, total of 400h bytes. + * + * These addresses are mapped as follows: + * + * 800h-83Fh Mode Dependent Scratch Mode 0 Pages 0-1 + * 840h-87Fh Mode Dependent Scratch Mode 1 Pages 0-1 + * 880h-8BFh Mode Dependent Scratch Mode 2 Pages 0-1 + * 8C0h-8FFh Mode Dependent Scratch Mode 3 Pages 0-1 + * 900h-93Fh Mode Dependent Scratch Mode 4 Pages 0-1 + * 940h-97Fh Mode Dependent Scratch Mode 5 Pages 0-1 + * 980h-9BFh Mode Dependent Scratch Mode 6 Pages 0-1 + * 9C0h-9FFh Mode Dependent Scratch Mode 7 Pages 0-1 + * A00h-A5Fh Mode Dependent Scratch Mode 8 Pages 0-2 + * Mode Independent Scratch Pages 0-2 + * A60h-A7Fh Mode Dependent Scratch Mode 8 Page 3 + * Mode Independent Scratch Page 3 + * A80h-AFFh Mode Independent Scratch Pages 4-7 + * B00h-B1Fh Mode Dependent Scratch Mode 0 Page 2 + * B20h-B3Fh Mode Dependent Scratch Mode 1 Page 2 + * B40h-B5Fh Mode Dependent Scratch Mode 2 Page 2 + * B60h-B7Fh Mode Dependent Scratch Mode 3 Page 2 + * B80h-B9Fh Mode Dependent Scratch Mode 4 Page 2 + * BA0h-BBFh Mode Dependent Scratch Mode 5 Page 2 + * BC0h-BDFh Mode Dependent Scratch Mode 6 Page 2 + * BE0h-BFFh Mode Dependent Scratch Mode 7 Page 2 + */ + +/* General macros */ +#define CSEQ_PAGE_SIZE 32 /* Scratch page size (in bytes) */ + +/* All macros start with offsets from base + 0x800 (CMAPPEDSCR). + * Mode dependent scratch page 0, mode 0. + * For modes 1-7 you have to do arithmetic. */ +#define CSEQ_LRM_SAVE_SINDEX (CMAPPEDSCR + 0x0000) +#define CSEQ_LRM_SAVE_SCBPTR (CMAPPEDSCR + 0x0002) +#define CSEQ_Q_LINK_HEAD (CMAPPEDSCR + 0x0004) +#define CSEQ_Q_LINK_TAIL (CMAPPEDSCR + 0x0006) +#define CSEQ_LRM_SAVE_SCRPAGE (CMAPPEDSCR + 0x0008) + +/* Mode dependent scratch page 0 mode 8 macros. */ +#define CSEQ_RET_ADDR (CMAPPEDSCR + 0x0200) +#define CSEQ_RET_SCBPTR (CMAPPEDSCR + 0x0202) +#define CSEQ_SAVE_SCBPTR (CMAPPEDSCR + 0x0204) +#define CSEQ_EMPTY_TRANS_CTX (CMAPPEDSCR + 0x0206) +#define CSEQ_RESP_LEN (CMAPPEDSCR + 0x0208) +#define CSEQ_TMF_SCBPTR (CMAPPEDSCR + 0x020A) +#define CSEQ_GLOBAL_PREV_SCB (CMAPPEDSCR + 0x020C) +#define CSEQ_GLOBAL_HEAD (CMAPPEDSCR + 0x020E) +#define CSEQ_CLEAR_LU_HEAD (CMAPPEDSCR + 0x0210) +#define CSEQ_TMF_OPCODE (CMAPPEDSCR + 0x0212) +#define CSEQ_SCRATCH_FLAGS (CMAPPEDSCR + 0x0213) +#define CSEQ_HSB_SITE (CMAPPEDSCR + 0x021A) +#define CSEQ_FIRST_INV_SCB_SITE (CMAPPEDSCR + 0x021C) +#define CSEQ_FIRST_INV_DDB_SITE (CMAPPEDSCR + 0x021E) + +/* Mode dependent scratch page 1 mode 8 macros. */ +#define CSEQ_LUN_TO_CLEAR (CMAPPEDSCR + 0x0220) +#define CSEQ_LUN_TO_CHECK (CMAPPEDSCR + 0x0228) + +/* Mode dependent scratch page 2 mode 8 macros */ +#define CSEQ_HQ_NEW_POINTER (CMAPPEDSCR + 0x0240) +#define CSEQ_HQ_DONE_BASE (CMAPPEDSCR + 0x0248) +#define CSEQ_HQ_DONE_POINTER (CMAPPEDSCR + 0x0250) +#define CSEQ_HQ_DONE_PASS (CMAPPEDSCR + 0x0254) + +/* Mode independent scratch page 4 macros. */ +#define CSEQ_Q_EXE_HEAD (CMAPPEDSCR + 0x0280) +#define CSEQ_Q_EXE_TAIL (CMAPPEDSCR + 0x0282) +#define CSEQ_Q_DONE_HEAD (CMAPPEDSCR + 0x0284) +#define CSEQ_Q_DONE_TAIL (CMAPPEDSCR + 0x0286) +#define CSEQ_Q_SEND_HEAD (CMAPPEDSCR + 0x0288) +#define CSEQ_Q_SEND_TAIL (CMAPPEDSCR + 0x028A) +#define CSEQ_Q_DMA2CHIM_HEAD (CMAPPEDSCR + 0x028C) +#define CSEQ_Q_DMA2CHIM_TAIL (CMAPPEDSCR + 0x028E) +#define CSEQ_Q_COPY_HEAD (CMAPPEDSCR + 0x0290) +#define CSEQ_Q_COPY_TAIL (CMAPPEDSCR + 0x0292) +#define CSEQ_REG0 (CMAPPEDSCR + 0x0294) +#define CSEQ_REG1 (CMAPPEDSCR + 0x0296) +#define CSEQ_REG2 (CMAPPEDSCR + 0x0298) +#define CSEQ_LINK_CTL_Q_MAP (CMAPPEDSCR + 0x029C) +#define CSEQ_MAX_CSEQ_MODE (CMAPPEDSCR + 0x029D) +#define CSEQ_FREE_LIST_HACK_COUNT (CMAPPEDSCR + 0x029E) + +/* Mode independent scratch page 5 macros. */ +#define CSEQ_EST_NEXUS_REQ_QUEUE (CMAPPEDSCR + 0x02A0) +#define CSEQ_EST_NEXUS_REQ_COUNT (CMAPPEDSCR + 0x02A8) +#define CSEQ_Q_EST_NEXUS_HEAD (CMAPPEDSCR + 0x02B0) +#define CSEQ_Q_EST_NEXUS_TAIL (CMAPPEDSCR + 0x02B2) +#define CSEQ_NEED_EST_NEXUS_SCB (CMAPPEDSCR + 0x02B4) +#define CSEQ_EST_NEXUS_REQ_HEAD (CMAPPEDSCR + 0x02B6) +#define CSEQ_EST_NEXUS_REQ_TAIL (CMAPPEDSCR + 0x02B7) +#define CSEQ_EST_NEXUS_SCB_OFFSET (CMAPPEDSCR + 0x02B8) + +/* Mode independent scratch page 6 macros. */ +#define CSEQ_INT_ROUT_RET_ADDR0 (CMAPPEDSCR + 0x02C0) +#define CSEQ_INT_ROUT_RET_ADDR1 (CMAPPEDSCR + 0x02C2) +#define CSEQ_INT_ROUT_SCBPTR (CMAPPEDSCR + 0x02C4) +#define CSEQ_INT_ROUT_MODE (CMAPPEDSCR + 0x02C6) +#define CSEQ_ISR_SCRATCH_FLAGS (CMAPPEDSCR + 0x02C7) +#define CSEQ_ISR_SAVE_SINDEX (CMAPPEDSCR + 0x02C8) +#define CSEQ_ISR_SAVE_DINDEX (CMAPPEDSCR + 0x02CA) +#define CSEQ_Q_MONIRTT_HEAD (CMAPPEDSCR + 0x02D0) +#define CSEQ_Q_MONIRTT_TAIL (CMAPPEDSCR + 0x02D2) +#define CSEQ_FREE_SCB_MASK (CMAPPEDSCR + 0x02D5) +#define CSEQ_BUILTIN_FREE_SCB_HEAD (CMAPPEDSCR + 0x02D6) +#define CSEQ_BUILTIN_FREE_SCB_TAIL (CMAPPEDSCR + 0x02D8) +#define CSEQ_EXTENDED_FREE_SCB_HEAD (CMAPPEDSCR + 0x02DA) +#define CSEQ_EXTENDED_FREE_SCB_TAIL (CMAPPEDSCR + 0x02DC) + +/* Mode independent scratch page 7 macros. */ +#define CSEQ_EMPTY_REQ_QUEUE (CMAPPEDSCR + 0x02E0) +#define CSEQ_EMPTY_REQ_COUNT (CMAPPEDSCR + 0x02E8) +#define CSEQ_Q_EMPTY_HEAD (CMAPPEDSCR + 0x02F0) +#define CSEQ_Q_EMPTY_TAIL (CMAPPEDSCR + 0x02F2) +#define CSEQ_NEED_EMPTY_SCB (CMAPPEDSCR + 0x02F4) +#define CSEQ_EMPTY_REQ_HEAD (CMAPPEDSCR + 0x02F6) +#define CSEQ_EMPTY_REQ_TAIL (CMAPPEDSCR + 0x02F7) +#define CSEQ_EMPTY_SCB_OFFSET (CMAPPEDSCR + 0x02F8) +#define CSEQ_PRIMITIVE_DATA (CMAPPEDSCR + 0x02FA) +#define CSEQ_TIMEOUT_CONST (CMAPPEDSCR + 0x02FC) + +/*************************************************************************** +* Link m Sequencer scratch RAM is 512 bytes. +* This scratch memory is divided into mode dependent and mode +* independent scratch with this memory further subdivided into +* pages of size 32 bytes. There are 4 pages (128 bytes) of +* mode independent scratch and 4 pages of dependent scratch +* memory for modes 0-2 (384 bytes). +* +* The host accesses this scratch in a different manner from the +* link sequencer. The sequencer has to use LSEQ registers +* LmSCRPAGE and LmMnSCRPAGE to access the scratch memory. A flat +* mapping of the scratch memory is avaliable for software +* convenience and to prevent corruption while the sequencer is +* running. This memory is mapped onto addresses 800h - 9FFh. +* +* These addresses are mapped as follows: +* +* 800h-85Fh Mode Dependent Scratch Mode 0 Pages 0-2 +* 860h-87Fh Mode Dependent Scratch Mode 0 Page 3 +* Mode Dependent Scratch Mode 5 Page 0 +* 880h-8DFh Mode Dependent Scratch Mode 1 Pages 0-2 +* 8E0h-8FFh Mode Dependent Scratch Mode 1 Page 3 +* Mode Dependent Scratch Mode 5 Page 1 +* 900h-95Fh Mode Dependent Scratch Mode 2 Pages 0-2 +* 960h-97Fh Mode Dependent Scratch Mode 2 Page 3 +* Mode Dependent Scratch Mode 5 Page 2 +* 980h-9DFh Mode Independent Scratch Pages 0-3 +* 9E0h-9FFh Mode Independent Scratch Page 3 +* Mode Dependent Scratch Mode 5 Page 3 +* +****************************************************************************/ +/* General macros */ +#define LSEQ_MODE_SCRATCH_SIZE 0x80 /* Size of scratch RAM per mode */ +#define LSEQ_PAGE_SIZE 0x20 /* Scratch page size (in bytes) */ +#define LSEQ_MODE5_PAGE0_OFFSET 0x60 + +/* Common mode dependent scratch page 0 macros for modes 0,1,2, and 5 */ +/* Indexed using LSEQ_MODE_SCRATCH_SIZE * mode, for modes 0,1,2. */ +#define LmSEQ_RET_ADDR(LinkNum) (LmSCRATCH(LinkNum) + 0x0000) +#define LmSEQ_REG0_MODE(LinkNum) (LmSCRATCH(LinkNum) + 0x0002) +#define LmSEQ_MODE_FLAGS(LinkNum) (LmSCRATCH(LinkNum) + 0x0004) + +/* Mode flag macros (byte 0) */ +#define SAS_SAVECTX_OCCURRED 0x80 +#define SAS_OOBSVC_OCCURRED 0x40 +#define SAS_OOB_DEVICE_PRESENT 0x20 +#define SAS_CFGHDR_OCCURRED 0x10 +#define SAS_RCV_INTS_ARE_DISABLED 0x08 +#define SAS_OOB_HOT_PLUG_CNCT 0x04 +#define SAS_AWAIT_OPEN_CONNECTION 0x02 +#define SAS_CFGCMPLT_OCCURRED 0x01 + +/* Mode flag macros (byte 1) */ +#define SAS_RLSSCB_OCCURRED 0x80 +#define SAS_FORCED_HEADER_MISS 0x40 + +#define LmSEQ_RET_ADDR2(LinkNum) (LmSCRATCH(LinkNum) + 0x0006) +#define LmSEQ_RET_ADDR1(LinkNum) (LmSCRATCH(LinkNum) + 0x0008) +#define LmSEQ_OPCODE_TO_CSEQ(LinkNum) (LmSCRATCH(LinkNum) + 0x000B) +#define LmSEQ_DATA_TO_CSEQ(LinkNum) (LmSCRATCH(LinkNum) + 0x000C) + +/* Mode dependent scratch page 0 macros for mode 0 (non-common) */ +/* Absolute offsets */ +#define LmSEQ_FIRST_INV_DDB_SITE(LinkNum) (LmSCRATCH(LinkNum) + 0x000E) +#define LmSEQ_EMPTY_TRANS_CTX(LinkNum) (LmSCRATCH(LinkNum) + 0x0010) +#define LmSEQ_RESP_LEN(LinkNum) (LmSCRATCH(LinkNum) + 0x0012) +#define LmSEQ_FIRST_INV_SCB_SITE(LinkNum) (LmSCRATCH(LinkNum) + 0x0014) +#define LmSEQ_INTEN_SAVE(LinkNum) (LmSCRATCH(LinkNum) + 0x0016) +#define LmSEQ_LINK_RST_FRM_LEN(LinkNum) (LmSCRATCH(LinkNum) + 0x001A) +#define LmSEQ_LINK_RST_PROTOCOL(LinkNum) (LmSCRATCH(LinkNum) + 0x001B) +#define LmSEQ_RESP_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x001C) +#define LmSEQ_LAST_LOADED_SGE(LinkNum) (LmSCRATCH(LinkNum) + 0x001D) +#define LmSEQ_SAVE_SCBPTR(LinkNum) (LmSCRATCH(LinkNum) + 0x001E) + +/* Mode dependent scratch page 0 macros for mode 1 (non-common) */ +/* Absolute offsets */ +#define LmSEQ_Q_XMIT_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x008E) +#define LmSEQ_M1_EMPTY_TRANS_CTX(LinkNum) (LmSCRATCH(LinkNum) + 0x0090) +#define LmSEQ_INI_CONN_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x0092) +#define LmSEQ_FAILED_OPEN_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x009A) +#define LmSEQ_XMIT_REQUEST_TYPE(LinkNum) (LmSCRATCH(LinkNum) + 0x009B) +#define LmSEQ_M1_RESP_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x009C) +#define LmSEQ_M1_LAST_LOADED_SGE(LinkNum) (LmSCRATCH(LinkNum) + 0x009D) +#define LmSEQ_M1_SAVE_SCBPTR(LinkNum) (LmSCRATCH(LinkNum) + 0x009E) + +/* Mode dependent scratch page 0 macros for mode 2 (non-common) */ +#define LmSEQ_PORT_COUNTER(LinkNum) (LmSCRATCH(LinkNum) + 0x010E) +#define LmSEQ_PM_TABLE_PTR(LinkNum) (LmSCRATCH(LinkNum) + 0x0110) +#define LmSEQ_SATA_INTERLOCK_TMR_SAVE(LinkNum) (LmSCRATCH(LinkNum) + 0x0112) +#define LmSEQ_IP_BITL(LinkNum) (LmSCRATCH(LinkNum) + 0x0114) +#define LmSEQ_COPY_SMP_CONN_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x0116) +#define LmSEQ_P0M2_OFFS1AH(LinkNum) (LmSCRATCH(LinkNum) + 0x011A) + +/* Mode dependent scratch page 0 macros for modes 4/5 (non-common) */ +/* Absolute offsets */ +#define LmSEQ_SAVED_OOB_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x006E) +#define LmSEQ_SAVED_OOB_MODE(LinkNum) (LmSCRATCH(LinkNum) + 0x006F) +#define LmSEQ_Q_LINK_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x0070) +#define LmSEQ_LINK_RST_ERR(LinkNum) (LmSCRATCH(LinkNum) + 0x0072) +#define LmSEQ_SAVED_OOB_SIGNALS(LinkNum) (LmSCRATCH(LinkNum) + 0x0073) +#define LmSEQ_SAS_RESET_MODE(LinkNum) (LmSCRATCH(LinkNum) + 0x0074) +#define LmSEQ_LINK_RESET_RETRY_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0075) +#define LmSEQ_NUM_LINK_RESET_RETRIES(LinkNum) (LmSCRATCH(LinkNum) + 0x0076) +#define LmSEQ_OOB_INT_ENABLES(LinkNum) (LmSCRATCH(LinkNum) + 0x007A) +#define LmSEQ_NOTIFY_TIMER_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x007C) +#define LmSEQ_NOTIFY_TIMER_DOWN_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x007E) + +/* Mode dependent scratch page 1, mode 0 and mode 1 */ +#define LmSEQ_SG_LIST_PTR_ADDR0(LinkNum) (LmSCRATCH(LinkNum) + 0x0020) +#define LmSEQ_SG_LIST_PTR_ADDR1(LinkNum) (LmSCRATCH(LinkNum) + 0x0030) +#define LmSEQ_M1_SG_LIST_PTR_ADDR0(LinkNum) (LmSCRATCH(LinkNum) + 0x00A0) +#define LmSEQ_M1_SG_LIST_PTR_ADDR1(LinkNum) (LmSCRATCH(LinkNum) + 0x00B0) + +/* Mode dependent scratch page 1 macros for mode 2 */ +/* Absolute offsets */ +#define LmSEQ_INVALID_DWORD_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0120) +#define LmSEQ_DISPARITY_ERROR_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0124) +#define LmSEQ_LOSS_OF_SYNC_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0128) + +/* Mode dependent scratch page 1 macros for mode 4/5 */ +#define LmSEQ_FRAME_TYPE_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00E0) +#define LmSEQ_HASHED_DEST_ADDR_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00E1) +#define LmSEQ_HASHED_SRC_ADDR_MASK_PRINT(LinkNum) (LmSCRATCH(LinkNum) + 0x00E4) +#define LmSEQ_HASHED_SRC_ADDR_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00E5) +#define LmSEQ_NUM_FILL_BYTES_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00EB) +#define LmSEQ_TAG_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00F0) +#define LmSEQ_TARGET_PORT_XFER_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x00F2) +#define LmSEQ_DATA_OFFSET(LinkNum) (LmSCRATCH(LinkNum) + 0x00F4) + +/* Mode dependent scratch page 2 macros for mode 0 */ +/* Absolute offsets */ +#define LmSEQ_SMP_RCV_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0040) +#define LmSEQ_DEVICE_BITS(LinkNum) (LmSCRATCH(LinkNum) + 0x005B) +#define LmSEQ_SDB_DDB(LinkNum) (LmSCRATCH(LinkNum) + 0x005C) +#define LmSEQ_SDB_NUM_TAGS(LinkNum) (LmSCRATCH(LinkNum) + 0x005E) +#define LmSEQ_SDB_CURR_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x005F) + +/* Mode dependent scratch page 2 macros for mode 1 */ +/* Absolute offsets */ +/* byte 0 bits 1-0 are domain select. */ +#define LmSEQ_TX_ID_ADDR_FRAME(LinkNum) (LmSCRATCH(LinkNum) + 0x00C0) +#define LmSEQ_OPEN_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x00C8) +#define LmSEQ_SRST_AS_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x00CC) +#define LmSEQ_LAST_LOADED_SG_EL(LinkNum) (LmSCRATCH(LinkNum) + 0x00D4) + +/* Mode dependent scratch page 2 macros for mode 2 */ +/* Absolute offsets */ +#define LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0140) +#define LmSEQ_CLOSE_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0144) +#define LmSEQ_BREAK_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0148) +#define LmSEQ_DWS_RESET_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x014C) +#define LmSEQ_SATA_INTERLOCK_TIMER_TERM_TS(LinkNum) \ + (LmSCRATCH(LinkNum) + 0x0150) +#define LmSEQ_MCTL_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0154) + +/* Mode dependent scratch page 2 macros for mode 5 */ +#define LmSEQ_COMINIT_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0160) +#define LmSEQ_RCV_ID_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0164) +#define LmSEQ_RCV_FIS_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0168) +#define LmSEQ_DEV_PRES_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x016C) + +/* Mode dependent scratch page 3 macros for modes 0 and 1 */ +/* None defined */ + +/* Mode dependent scratch page 3 macros for modes 2 and 5 */ +/* None defined */ + +/* Mode Independent Scratch page 0 macros. */ +#define LmSEQ_Q_TGTXFR_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x0180) +#define LmSEQ_Q_TGTXFR_TAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x0182) +#define LmSEQ_LINK_NUMBER(LinkNum) (LmSCRATCH(LinkNum) + 0x0186) +#define LmSEQ_SCRATCH_FLAGS(LinkNum) (LmSCRATCH(LinkNum) + 0x0187) +/* + * Currently only bit 0, SAS_DWSAQD, is used. + */ +#define SAS_DWSAQD 0x01 /* + * DWSSTATUS: DWSAQD + * bit las read in ISR. + */ +#define LmSEQ_CONNECTION_STATE(LinkNum) (LmSCRATCH(LinkNum) + 0x0188) +/* Connection states (byte 0) */ +#define SAS_WE_OPENED_CS 0x01 +#define SAS_DEVICE_OPENED_CS 0x02 +#define SAS_WE_SENT_DONE_CS 0x04 +#define SAS_DEVICE_SENT_DONE_CS 0x08 +#define SAS_WE_SENT_CLOSE_CS 0x10 +#define SAS_DEVICE_SENT_CLOSE_CS 0x20 +#define SAS_WE_SENT_BREAK_CS 0x40 +#define SAS_DEVICE_SENT_BREAK_CS 0x80 +/* Connection states (byte 1) */ +#define SAS_OPN_TIMEOUT_OR_OPN_RJCT_CS 0x01 +#define SAS_AIP_RECEIVED_CS 0x02 +#define SAS_CREDIT_TIMEOUT_OCCURRED_CS 0x04 +#define SAS_ACKNAK_TIMEOUT_OCCURRED_CS 0x08 +#define SAS_SMPRSP_TIMEOUT_OCCURRED_CS 0x10 +#define SAS_DONE_TIMEOUT_OCCURRED_CS 0x20 +/* Connection states (byte 2) */ +#define SAS_SMP_RESPONSE_RECEIVED_CS 0x01 +#define SAS_INTLK_TIMEOUT_OCCURRED_CS 0x02 +#define SAS_DEVICE_SENT_DMAT_CS 0x04 +#define SAS_DEVICE_SENT_SYNCSRST_CS 0x08 +#define SAS_CLEARING_AFFILIATION_CS 0x20 +#define SAS_RXTASK_ACTIVE_CS 0x40 +#define SAS_TXTASK_ACTIVE_CS 0x80 +/* Connection states (byte 3) */ +#define SAS_PHY_LOSS_OF_SIGNAL_CS 0x01 +#define SAS_DWS_TIMER_EXPIRED_CS 0x02 +#define SAS_LINK_RESET_NOT_COMPLETE_CS 0x04 +#define SAS_PHY_DISABLED_CS 0x08 +#define SAS_LINK_CTL_TASK_ACTIVE_CS 0x10 +#define SAS_PHY_EVENT_TASK_ACTIVE_CS 0x20 +#define SAS_DEVICE_SENT_ID_FRAME_CS 0x40 +#define SAS_DEVICE_SENT_REG_FIS_CS 0x40 +#define SAS_DEVICE_SENT_HARD_RESET_CS 0x80 +#define SAS_PHY_IS_DOWN_FLAGS (SAS_PHY_LOSS_OF_SIGNAL_CS|\ + SAS_DWS_TIMER_EXPIRED_CS |\ + SAS_LINK_RESET_NOT_COMPLETE_CS|\ + SAS_PHY_DISABLED_CS) + +#define SAS_LINK_CTL_PHY_EVENT_FLAGS (SAS_LINK_CTL_TASK_ACTIVE_CS |\ + SAS_PHY_EVENT_TASK_ACTIVE_CS |\ + SAS_DEVICE_SENT_ID_FRAME_CS |\ + SAS_DEVICE_SENT_HARD_RESET_CS) + +#define LmSEQ_CONCTL(LinkNum) (LmSCRATCH(LinkNum) + 0x018C) +#define LmSEQ_CONSTAT(LinkNum) (LmSCRATCH(LinkNum) + 0x018E) +#define LmSEQ_CONNECTION_MODES(LinkNum) (LmSCRATCH(LinkNum) + 0x018F) +#define LmSEQ_REG1_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0192) +#define LmSEQ_REG2_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0194) +#define LmSEQ_REG3_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0196) +#define LmSEQ_REG0_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0198) + +/* Mode independent scratch page 1 macros. */ +#define LmSEQ_EST_NEXUS_SCBPTR0(LinkNum) (LmSCRATCH(LinkNum) + 0x01A0) +#define LmSEQ_EST_NEXUS_SCBPTR1(LinkNum) (LmSCRATCH(LinkNum) + 0x01A2) +#define LmSEQ_EST_NEXUS_SCBPTR2(LinkNum) (LmSCRATCH(LinkNum) + 0x01A4) +#define LmSEQ_EST_NEXUS_SCBPTR3(LinkNum) (LmSCRATCH(LinkNum) + 0x01A6) +#define LmSEQ_EST_NEXUS_SCB_OPCODE0(LinkNum) (LmSCRATCH(LinkNum) + 0x01A8) +#define LmSEQ_EST_NEXUS_SCB_OPCODE1(LinkNum) (LmSCRATCH(LinkNum) + 0x01A9) +#define LmSEQ_EST_NEXUS_SCB_OPCODE2(LinkNum) (LmSCRATCH(LinkNum) + 0x01AA) +#define LmSEQ_EST_NEXUS_SCB_OPCODE3(LinkNum) (LmSCRATCH(LinkNum) + 0x01AB) +#define LmSEQ_EST_NEXUS_SCB_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x01AC) +#define LmSEQ_EST_NEXUS_SCB_TAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01AD) +#define LmSEQ_EST_NEXUS_BUF_AVAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01AE) +#define LmSEQ_TIMEOUT_CONST(LinkNum) (LmSCRATCH(LinkNum) + 0x01B8) +#define LmSEQ_ISR_SAVE_SINDEX(LinkNum) (LmSCRATCH(LinkNum) + 0x01BC) +#define LmSEQ_ISR_SAVE_DINDEX(LinkNum) (LmSCRATCH(LinkNum) + 0x01BE) + +/* Mode independent scratch page 2 macros. */ +#define LmSEQ_EMPTY_SCB_PTR0(LinkNum) (LmSCRATCH(LinkNum) + 0x01C0) +#define LmSEQ_EMPTY_SCB_PTR1(LinkNum) (LmSCRATCH(LinkNum) + 0x01C2) +#define LmSEQ_EMPTY_SCB_PTR2(LinkNum) (LmSCRATCH(LinkNum) + 0x01C4) +#define LmSEQ_EMPTY_SCB_PTR3(LinkNum) (LmSCRATCH(LinkNum) + 0x01C6) +#define LmSEQ_EMPTY_SCB_OPCD0(LinkNum) (LmSCRATCH(LinkNum) + 0x01C8) +#define LmSEQ_EMPTY_SCB_OPCD1(LinkNum) (LmSCRATCH(LinkNum) + 0x01C9) +#define LmSEQ_EMPTY_SCB_OPCD2(LinkNum) (LmSCRATCH(LinkNum) + 0x01CA) +#define LmSEQ_EMPTY_SCB_OPCD3(LinkNum) (LmSCRATCH(LinkNum) + 0x01CB) +#define LmSEQ_EMPTY_SCB_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x01CC) +#define LmSEQ_EMPTY_SCB_TAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01CD) +#define LmSEQ_EMPTY_BUFS_AVAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01CE) +#define LmSEQ_ATA_SCR_REGS(LinkNum) (LmSCRATCH(LinkNum) + 0x01D4) + +/* Mode independent scratch page 3 macros. */ +#define LmSEQ_DEV_PRES_TMR_TOUT_CONST(LinkNum) (LmSCRATCH(LinkNum) + 0x01E0) +#define LmSEQ_SATA_INTERLOCK_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01E4) +#define LmSEQ_STP_SHUTDOWN_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01E8) +#define LmSEQ_SRST_ASSERT_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01EC) +#define LmSEQ_RCV_FIS_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01F0) +#define LmSEQ_ONE_MILLISEC_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01F4) +#define LmSEQ_TEN_MS_COMINIT_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01F8) +#define LmSEQ_SMP_RCV_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01FC) + +#endif diff --git a/drivers/scsi/aic94xx/aic94xx_sas.h b/drivers/scsi/aic94xx/aic94xx_sas.h new file mode 100644 index 00000000000..64d23171234 --- /dev/null +++ b/drivers/scsi/aic94xx/aic94xx_sas.h @@ -0,0 +1,785 @@ +/* + * Aic94xx SAS/SATA driver SAS definitions and hardware interface header file. + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This file is part of the aic94xx driver. + * + * The aic94xx driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * The aic94xx driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the aic94xx driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#ifndef _AIC94XX_SAS_H_ +#define _AIC94XX_SAS_H_ + +#include <scsi/libsas.h> + +/* ---------- DDBs ---------- */ +/* DDBs are device descriptor blocks which describe a device in the + * domain that this sequencer can maintain low-level connections for + * us. They are be 64 bytes. + */ + +struct asd_ddb_ssp_smp_target_port { + u8 conn_type; /* byte 0 */ +#define DDB_TP_CONN_TYPE 0x81 /* Initiator port and addr frame type 0x01 */ + + u8 conn_rate; + __be16 init_conn_tag; + u8 dest_sas_addr[8]; /* bytes 4-11 */ + + __le16 send_queue_head; + u8 sq_suspended; + u8 ddb_type; /* DDB_TYPE_TARGET */ +#define DDB_TYPE_UNUSED 0xFF +#define DDB_TYPE_TARGET 0xFE +#define DDB_TYPE_INITIATOR 0xFD +#define DDB_TYPE_PM_PORT 0xFC + + __le16 _r_a; + __be16 awt_def; + + u8 compat_features; /* byte 20 */ + u8 pathway_blocked_count; + __be16 arb_wait_time; + __be32 more_compat_features; /* byte 24 */ + + u8 conn_mask; + u8 flags; /* concurrent conn:2,2 and open:0(1) */ +#define CONCURRENT_CONN_SUPP 0x04 +#define OPEN_REQUIRED 0x01 + + u16 _r_b; + __le16 exec_queue_tail; + __le16 send_queue_tail; + __le16 sister_ddb; + + __le16 _r_c; + + u8 max_concurrent_conn; + u8 num_concurrent_conn; + u8 num_contexts; + + u8 _r_d; + + __le16 active_task_count; + + u8 _r_e[9]; + + u8 itnl_reason; /* I_T nexus loss reason */ + + __le16 _r_f; + + __le16 itnl_timeout; +#define ITNL_TIMEOUT_CONST 0x7D0 /* 2 seconds */ + + __le32 itnl_timestamp; +} __attribute__ ((packed)); + +struct asd_ddb_stp_sata_target_port { + u8 conn_type; /* byte 0 */ + u8 conn_rate; + __be16 init_conn_tag; + u8 dest_sas_addr[8]; /* bytes 4-11 */ + + __le16 send_queue_head; + u8 sq_suspended; + u8 ddb_type; /* DDB_TYPE_TARGET */ + + __le16 _r_a; + + __be16 awt_def; + u8 compat_features; /* byte 20 */ + u8 pathway_blocked_count; + __be16 arb_wait_time; + __be32 more_compat_features; /* byte 24 */ + + u8 conn_mask; + u8 flags; /* concurrent conn:2,2 and open:0(1) */ +#define SATA_MULTIPORT 0x80 +#define SUPPORTS_AFFIL 0x40 +#define STP_AFFIL_POL 0x20 + + u8 _r_b; + u8 flags2; /* STP close policy:0 */ +#define STP_CL_POL_NO_TX 0x00 +#define STP_CL_POL_BTW_CMDS 0x01 + + __le16 exec_queue_tail; + __le16 send_queue_tail; + __le16 sister_ddb; + __le16 ata_cmd_scbptr; + __le32 sata_tag_alloc_mask; + __le16 active_task_count; + __le16 _r_c; + __le32 sata_sactive; + u8 num_sata_tags; + u8 sata_status; + u8 sata_ending_status; + u8 itnl_reason; /* I_T nexus loss reason */ + __le16 ncq_data_scb_ptr; + __le16 itnl_timeout; + __le32 itnl_timestamp; +} __attribute__ ((packed)); + +/* This struct asd_ddb_init_port, describes the device descriptor block + * of an initiator port (when the sequencer is operating in target mode). + * Bytes [0,11] and [20,27] are from the OPEN address frame. + * The sequencer allocates an initiator port DDB entry. + */ +struct asd_ddb_init_port { + u8 conn_type; /* byte 0 */ + u8 conn_rate; + __be16 init_conn_tag; /* BE */ + u8 dest_sas_addr[8]; + __le16 send_queue_head; /* LE, byte 12 */ + u8 sq_suspended; + u8 ddb_type; /* DDB_TYPE_INITIATOR */ + __le16 _r_a; + __be16 awt_def; /* BE */ + u8 compat_features; + u8 pathway_blocked_count; + __be16 arb_wait_time; /* BE */ + __be32 more_compat_features; /* BE */ + u8 conn_mask; + u8 flags; /* == 5 */ + u16 _r_b; + __le16 exec_queue_tail; /* execution queue tail */ + __le16 send_queue_tail; + __le16 sister_ddb; + __le16 init_resp_timeout; /* initiator response timeout */ + __le32 _r_c; + __le16 active_tasks; /* active task count */ + __le16 init_list; /* initiator list link pointer */ + __le32 _r_d; + u8 max_conn_to[3]; /* from Conn-Disc mode page, in us, LE */ + u8 itnl_reason; /* I_T nexus loss reason */ + __le16 bus_inact_to; /* from Conn-Disc mode page, in 100 us, LE */ + __le16 itnl_to; /* from the Protocol Specific Port Ctrl MP */ + __le32 itnl_timestamp; +} __attribute__ ((packed)); + +/* This struct asd_ddb_sata_tag, describes a look-up table to be used + * by the sequencers. SATA II, IDENTIFY DEVICE data, word 76, bit 8: + * NCQ support. This table is used by the sequencers to find the + * corresponding SCB, given a SATA II tag value. + */ +struct asd_ddb_sata_tag { + __le16 scb_pointer[32]; +} __attribute__ ((packed)); + +/* This struct asd_ddb_sata_pm_table, describes a port number to + * connection handle look-up table. SATA targets attached to a port + * multiplier require a 4-bit port number value. There is one DDB + * entry of this type for each SATA port multiplier (sister DDB). + * Given a SATA PM port number, this table gives us the SATA PM Port + * DDB of the SATA port multiplier port (i.e. the SATA target + * discovered on the port). + */ +struct asd_ddb_sata_pm_table { + __le16 ddb_pointer[16]; + __le16 _r_a[16]; +} __attribute__ ((packed)); + +/* This struct asd_ddb_sata_pm_port, describes the SATA port multiplier + * port format DDB. + */ +struct asd_ddb_sata_pm_port { + u8 _r_a[15]; + u8 ddb_type; + u8 _r_b[13]; + u8 pm_port_flags; +#define PM_PORT_MASK 0xF0 +#define PM_PORT_SET 0x02 + u8 _r_c[6]; + __le16 sister_ddb; + __le16 ata_cmd_scbptr; + __le32 sata_tag_alloc_mask; + __le16 active_task_count; + __le16 parent_ddb; + __le32 sata_sactive; + u8 num_sata_tags; + u8 sata_status; + u8 sata_ending_status; + u8 _r_d[9]; +} __attribute__ ((packed)); + +/* This struct asd_ddb_seq_shared, describes a DDB shared by the + * central and link sequencers. port_map_by_links is indexed phy + * number [0,7]; each byte is a bit mask of all the phys that are in + * the same port as the indexed phy. + */ +struct asd_ddb_seq_shared { + __le16 q_free_ddb_head; + __le16 q_free_ddb_tail; + __le16 q_free_ddb_cnt; + __le16 q_used_ddb_head; + __le16 q_used_ddb_tail; + __le16 shared_mem_lock; + __le16 smp_conn_tag; + __le16 est_nexus_buf_cnt; + __le16 est_nexus_buf_thresh; + u32 _r_a; + u8 settable_max_contexts; + u8 _r_b[23]; + u8 conn_not_active; + u8 phy_is_up; + u8 _r_c[8]; + u8 port_map_by_links[8]; +} __attribute__ ((packed)); + +/* ---------- SG Element ---------- */ + +/* This struct sg_el, describes the hardware scatter gather buffer + * element. All entries are little endian. In an SCB, there are 2 of + * this, plus one more, called a link element of this indicating a + * sublist if needed. + * + * A link element has only the bus address set and the flags (DS) bit + * valid. The bus address points to the start of the sublist. + * + * If a sublist is needed, then that sublist should also include the 2 + * sg_el embedded in the SCB, in which case next_sg_offset is 32, + * since sizeof(sg_el) = 16; EOS should be 1 and EOL 0 in this case. + */ +struct sg_el { + __le64 bus_addr; + __le32 size; + __le16 _r; + u8 next_sg_offs; + u8 flags; +#define ASD_SG_EL_DS_MASK 0x30 +#define ASD_SG_EL_DS_OCM 0x10 +#define ASD_SG_EL_DS_HM 0x00 +#define ASD_SG_EL_LIST_MASK 0xC0 +#define ASD_SG_EL_LIST_EOL 0x40 +#define ASD_SG_EL_LIST_EOS 0x80 +} __attribute__ ((packed)); + +/* ---------- SCBs ---------- */ + +/* An SCB (sequencer control block) is comprised of a common header + * and a task part, for a total of 128 bytes. All fields are in LE + * order, unless otherwise noted. + */ + +/* This struct scb_header, defines the SCB header format. + */ +struct scb_header { + __le64 next_scb; + __le16 index; /* transaction context */ + u8 opcode; +} __attribute__ ((packed)); + +/* SCB opcodes: Execution queue + */ +#define INITIATE_SSP_TASK 0x00 +#define INITIATE_LONG_SSP_TASK 0x01 +#define INITIATE_BIDIR_SSP_TASK 0x02 +#define ABORT_TASK 0x03 +#define INITIATE_SSP_TMF 0x04 +#define SSP_TARG_GET_DATA 0x05 +#define SSP_TARG_GET_DATA_GOOD 0x06 +#define SSP_TARG_SEND_RESP 0x07 +#define QUERY_SSP_TASK 0x08 +#define INITIATE_ATA_TASK 0x09 +#define INITIATE_ATAPI_TASK 0x0a +#define CONTROL_ATA_DEV 0x0b +#define INITIATE_SMP_TASK 0x0c +#define SMP_TARG_SEND_RESP 0x0f + +/* SCB opcodes: Send Queue + */ +#define SSP_TARG_SEND_DATA 0x40 +#define SSP_TARG_SEND_DATA_GOOD 0x41 + +/* SCB opcodes: Link Queue + */ +#define CONTROL_PHY 0x80 +#define SEND_PRIMITIVE 0x81 +#define INITIATE_LINK_ADM_TASK 0x82 + +/* SCB opcodes: other + */ +#define EMPTY_SCB 0xc0 +#define INITIATE_SEQ_ADM_TASK 0xc1 +#define EST_ICL_TARG_WINDOW 0xc2 +#define COPY_MEM 0xc3 +#define CLEAR_NEXUS 0xc4 +#define INITIATE_DDB_ADM_TASK 0xc6 +#define ESTABLISH_NEXUS_ESCB 0xd0 + +#define LUN_SIZE 8 + +/* See SAS spec, task IU + */ +struct ssp_task_iu { + u8 lun[LUN_SIZE]; /* BE */ + u16 _r_a; + u8 tmf; + u8 _r_b; + __be16 tag; /* BE */ + u8 _r_c[14]; +} __attribute__ ((packed)); + +/* See SAS spec, command IU + */ +struct ssp_command_iu { + u8 lun[LUN_SIZE]; + u8 _r_a; + u8 efb_prio_attr; /* enable first burst, task prio & attr */ +#define EFB_MASK 0x80 +#define TASK_PRIO_MASK 0x78 +#define TASK_ATTR_MASK 0x07 + + u8 _r_b; + u8 add_cdb_len; /* in dwords, since bit 0,1 are reserved */ + union { + u8 cdb[16]; + struct { + __le64 long_cdb_addr; /* bus address, LE */ + __le32 long_cdb_size; /* LE */ + u8 _r_c[3]; + u8 eol_ds; /* eol:6,6, ds:5,4 */ + } long_cdb; /* sequencer extension */ + }; +} __attribute__ ((packed)); + +struct xfer_rdy_iu { + __be32 requested_offset; /* BE */ + __be32 write_data_len; /* BE */ + __be32 _r_a; +} __attribute__ ((packed)); + +/* ---------- SCB tasks ---------- */ + +/* This is both ssp_task and long_ssp_task + */ +struct initiate_ssp_task { + u8 proto_conn_rate; /* proto:6,4, conn_rate:3,0 */ + __le32 total_xfer_len; + struct ssp_frame_hdr ssp_frame; + struct ssp_command_iu ssp_cmd; + __le16 sister_scb; /* 0xFFFF */ + __le16 conn_handle; /* index to DDB for the intended target */ + u8 data_dir; /* :1,0 */ +#define DATA_DIR_NONE 0x00 +#define DATA_DIR_IN 0x01 +#define DATA_DIR_OUT 0x02 +#define DATA_DIR_BYRECIPIENT 0x03 + + u8 _r_a; + u8 retry_count; + u8 _r_b[5]; + struct sg_el sg_element[3]; /* 2 real and 1 link */ +} __attribute__ ((packed)); + +/* This defines both ata_task and atapi_task. + * ata: C bit of FIS should be 1, + * atapi: C bit of FIS should be 1, and command register should be 0xA0, + * to indicate a packet command. + */ +struct initiate_ata_task { + u8 proto_conn_rate; + __le32 total_xfer_len; + struct host_to_dev_fis fis; + __le32 data_offs; + u8 atapi_packet[16]; + u8 _r_a[12]; + __le16 sister_scb; + __le16 conn_handle; + u8 ata_flags; /* CSMI:6,6, DTM:4,4, QT:3,3, data dir:1,0 */ +#define CSMI_TASK 0x40 +#define DATA_XFER_MODE_DMA 0x10 +#define ATA_Q_TYPE_MASK 0x08 +#define ATA_Q_TYPE_UNTAGGED 0x00 +#define ATA_Q_TYPE_NCQ 0x08 + + u8 _r_b; + u8 retry_count; + u8 _r_c; + u8 flags; +#define STP_AFFIL_POLICY 0x20 +#define SET_AFFIL_POLICY 0x10 +#define RET_PARTIAL_SGLIST 0x02 + + u8 _r_d[3]; + struct sg_el sg_element[3]; +} __attribute__ ((packed)); + +struct initiate_smp_task { + u8 proto_conn_rate; + u8 _r_a[40]; + struct sg_el smp_req; + __le16 sister_scb; + __le16 conn_handle; + u8 _r_c[8]; + struct sg_el smp_resp; + u8 _r_d[32]; +} __attribute__ ((packed)); + +struct control_phy { + u8 phy_id; + u8 sub_func; +#define DISABLE_PHY 0x00 +#define ENABLE_PHY 0x01 +#define RELEASE_SPINUP_HOLD 0x02 +#define ENABLE_PHY_NO_SAS_OOB 0x03 +#define ENABLE_PHY_NO_SATA_OOB 0x04 +#define PHY_NO_OP 0x05 +#define EXECUTE_HARD_RESET 0x81 + + u8 func_mask; + u8 speed_mask; + u8 hot_plug_delay; + u8 port_type; + u8 flags; +#define DEV_PRES_TIMER_OVERRIDE_ENABLE 0x01 +#define DISABLE_PHY_IF_OOB_FAILS 0x02 + + __le32 timeout_override; + u8 link_reset_retries; + u8 _r_a[47]; + __le16 conn_handle; + u8 _r_b[56]; +} __attribute__ ((packed)); + +struct control_ata_dev { + u8 proto_conn_rate; + __le32 _r_a; + struct host_to_dev_fis fis; + u8 _r_b[32]; + __le16 sister_scb; + __le16 conn_handle; + u8 ata_flags; /* 0 */ + u8 _r_c[55]; +} __attribute__ ((packed)); + +struct empty_scb { + u8 num_valid; + __le32 _r_a; +#define ASD_EDBS_PER_SCB 7 +/* header+data+CRC+DMA suffix data */ +#define ASD_EDB_SIZE (24+1024+4+16) + struct sg_el eb[ASD_EDBS_PER_SCB]; +#define ELEMENT_NOT_VALID 0xC0 +} __attribute__ ((packed)); + +struct initiate_link_adm { + u8 phy_id; + u8 sub_func; +#define GET_LINK_ERROR_COUNT 0x00 +#define RESET_LINK_ERROR_COUNT 0x01 +#define ENABLE_NOTIFY_SPINUP_INTS 0x02 + + u8 _r_a[57]; + __le16 conn_handle; + u8 _r_b[56]; +} __attribute__ ((packed)); + +struct copy_memory { + u8 _r_a; + __le16 xfer_len; + __le16 _r_b; + __le64 src_busaddr; + u8 src_ds; /* See definition of sg_el */ + u8 _r_c[45]; + __le16 conn_handle; + __le64 _r_d; + __le64 dest_busaddr; + u8 dest_ds; /* See definition of sg_el */ + u8 _r_e[39]; +} __attribute__ ((packed)); + +struct abort_task { + u8 proto_conn_rate; + __le32 _r_a; + struct ssp_frame_hdr ssp_frame; + struct ssp_task_iu ssp_task; + __le16 sister_scb; + __le16 conn_handle; + u8 flags; /* ovrd_itnl_timer:3,3, suspend_data_trans:2,2 */ +#define SUSPEND_DATA_TRANS 0x04 + + u8 _r_b; + u8 retry_count; + u8 _r_c[5]; + __le16 index; /* Transaction context of task to be queried */ + __le16 itnl_to; + u8 _r_d[44]; +} __attribute__ ((packed)); + +struct clear_nexus { + u8 nexus; +#define NEXUS_ADAPTER 0x00 +#define NEXUS_PORT 0x01 +#define NEXUS_I_T 0x02 +#define NEXUS_I_T_L 0x03 +#define NEXUS_TAG 0x04 +#define NEXUS_TRANS_CX 0x05 +#define NEXUS_SATA_TAG 0x06 +#define NEXUS_T_L 0x07 +#define NEXUS_L 0x08 +#define NEXUS_T_TAG 0x09 + + __le32 _r_a; + u8 flags; +#define SUSPEND_TX 0x80 +#define RESUME_TX 0x40 +#define SEND_Q 0x04 +#define EXEC_Q 0x02 +#define NOTINQ 0x01 + + u8 _r_b[3]; + u8 conn_mask; + u8 _r_c[19]; + struct ssp_task_iu ssp_task; /* LUN and TAG */ + __le16 _r_d; + __le16 conn_handle; + __le64 _r_e; + __le16 index; /* Transaction context of task to be cleared */ + __le16 context; /* Clear nexus context */ + u8 _r_f[44]; +} __attribute__ ((packed)); + +struct initiate_ssp_tmf { + u8 proto_conn_rate; + __le32 _r_a; + struct ssp_frame_hdr ssp_frame; + struct ssp_task_iu ssp_task; + __le16 sister_scb; + __le16 conn_handle; + u8 flags; /* itnl override and suspend data tx */ +#define OVERRIDE_ITNL_TIMER 8 + + u8 _r_b; + u8 retry_count; + u8 _r_c[5]; + __le16 index; /* Transaction context of task to be queried */ + __le16 itnl_to; + u8 _r_d[44]; +} __attribute__ ((packed)); + +/* Transmits an arbitrary primitive on the link. + * Used for NOTIFY and BROADCAST. + */ +struct send_prim { + u8 phy_id; + u8 wait_transmit; /* :0,0 */ + u8 xmit_flags; +#define XMTPSIZE_MASK 0xF0 +#define XMTPSIZE_SINGLE 0x10 +#define XMTPSIZE_REPEATED 0x20 +#define XMTPSIZE_CONT 0x20 +#define XMTPSIZE_TRIPLE 0x30 +#define XMTPSIZE_REDUNDANT 0x60 +#define XMTPSIZE_INF 0 + +#define XMTCONTEN 0x04 +#define XMTPFRM 0x02 /* Transmit at the next frame boundary */ +#define XMTPIMM 0x01 /* Transmit immediately */ + + __le16 _r_a; + u8 prim[4]; /* K, D0, D1, D2 */ + u8 _r_b[50]; + __le16 conn_handle; + u8 _r_c[56]; +} __attribute__ ((packed)); + +/* This describes both SSP Target Get Data and SSP Target Get Data And + * Send Good Response SCBs. Used when the sequencer is operating in + * target mode... + */ +struct ssp_targ_get_data { + u8 proto_conn_rate; + __le32 total_xfer_len; + struct ssp_frame_hdr ssp_frame; + struct xfer_rdy_iu xfer_rdy; + u8 lun[LUN_SIZE]; + __le64 _r_a; + __le16 sister_scb; + __le16 conn_handle; + u8 data_dir; /* 01b */ + u8 _r_b; + u8 retry_count; + u8 _r_c[5]; + struct sg_el sg_element[3]; +} __attribute__ ((packed)); + +/* ---------- The actual SCB struct ---------- */ + +struct scb { + struct scb_header header; + union { + struct initiate_ssp_task ssp_task; + struct initiate_ata_task ata_task; + struct initiate_smp_task smp_task; + struct control_phy control_phy; + struct control_ata_dev control_ata_dev; + struct empty_scb escb; + struct initiate_link_adm link_adm; + struct copy_memory cp_mem; + struct abort_task abort_task; + struct clear_nexus clear_nexus; + struct initiate_ssp_tmf ssp_tmf; + }; +} __attribute__ ((packed)); + +/* ---------- Done List ---------- */ +/* The done list entry opcode field is defined below. + * The mnemonic encoding and meaning is as follows: + * TC - Task Complete, status was received and acknowledged + * TF - Task Failed, indicates an error prior to receiving acknowledgment + * for the command: + * - no conn, + * - NACK or R_ERR received in response to this command, + * - credit blocked or not available, or in the case of SMP request, + * - no SMP response was received. + * In these four cases it is known that the target didn't receive the + * command. + * TI - Task Interrupted, error after the command was acknowledged. It is + * known that the command was received by the target. + * TU - Task Unacked, command was transmitted but neither ACK (R_OK) nor NAK + * (R_ERR) was received due to loss of signal, broken connection, loss of + * dword sync or other reason. The application client should send the + * appropriate task query. + * TA - Task Aborted, see TF. + * _RESP - The completion includes an empty buffer containing status. + * TO - Timeout. + */ +#define TC_NO_ERROR 0x00 +#define TC_UNDERRUN 0x01 +#define TC_OVERRUN 0x02 +#define TF_OPEN_TO 0x03 +#define TF_OPEN_REJECT 0x04 +#define TI_BREAK 0x05 +#define TI_PROTO_ERR 0x06 +#define TC_SSP_RESP 0x07 +#define TI_PHY_DOWN 0x08 +#define TF_PHY_DOWN 0x09 +#define TC_LINK_ADM_RESP 0x0a +#define TC_CSMI 0x0b +#define TC_ATA_RESP 0x0c +#define TU_PHY_DOWN 0x0d +#define TU_BREAK 0x0e +#define TI_SATA_TO 0x0f +#define TI_NAK 0x10 +#define TC_CONTROL_PHY 0x11 +#define TF_BREAK 0x12 +#define TC_RESUME 0x13 +#define TI_ACK_NAK_TO 0x14 +#define TF_SMPRSP_TO 0x15 +#define TF_SMP_XMIT_RCV_ERR 0x16 +#define TC_PARTIAL_SG_LIST 0x17 +#define TU_ACK_NAK_TO 0x18 +#define TU_SATA_TO 0x19 +#define TF_NAK_RECV 0x1a +#define TA_I_T_NEXUS_LOSS 0x1b +#define TC_ATA_R_ERR_RECV 0x1c +#define TF_TMF_NO_CTX 0x1d +#define TA_ON_REQ 0x1e +#define TF_TMF_NO_TAG 0x1f +#define TF_TMF_TAG_FREE 0x20 +#define TF_TMF_TASK_DONE 0x21 +#define TF_TMF_NO_CONN_HANDLE 0x22 +#define TC_TASK_CLEARED 0x23 +#define TI_SYNCS_RECV 0x24 +#define TU_SYNCS_RECV 0x25 +#define TF_IRTT_TO 0x26 +#define TF_NO_SMP_CONN 0x27 +#define TF_IU_SHORT 0x28 +#define TF_DATA_OFFS_ERR 0x29 +#define TF_INV_CONN_HANDLE 0x2a +#define TF_REQUESTED_N_PENDING 0x2b + +/* 0xc1 - 0xc7: empty buffer received, + 0xd1 - 0xd7: establish nexus empty buffer received +*/ +/* This is the ESCB mask */ +#define ESCB_RECVD 0xC0 + + +/* This struct done_list_struct defines the done list entry. + * All fields are LE. + */ +struct done_list_struct { + __le16 index; /* aka transaction context */ + u8 opcode; + u8 status_block[4]; + u8 toggle; /* bit 0 */ +#define DL_TOGGLE_MASK 0x01 +} __attribute__ ((packed)); + +/* ---------- PHYS ---------- */ + +struct asd_phy { + struct asd_sas_phy sas_phy; + struct asd_phy_desc *phy_desc; /* hw profile */ + + struct sas_identify_frame *identify_frame; + struct asd_dma_tok *id_frm_tok; + + u8 frame_rcvd[ASD_EDB_SIZE]; +}; + + +#define ASD_SCB_SIZE sizeof(struct scb) +#define ASD_DDB_SIZE sizeof(struct asd_ddb_ssp_smp_target_port) + +/* Define this to 0 if you do not want NOTIFY (ENABLE SPINIP) sent. + * Default: 0x10 (it's a mask) + */ +#define ASD_NOTIFY_ENABLE_SPINUP 0x10 + +/* If enabled, set this to the interval between transmission + * of NOTIFY (ENABLE SPINUP). In units of 200 us. + */ +#define ASD_NOTIFY_TIMEOUT 2500 + +/* Initial delay after OOB, before we transmit NOTIFY (ENABLE SPINUP). + * If 0, transmit immediately. In milliseconds. + */ +#define ASD_NOTIFY_DOWN_COUNT 0 + +/* Device present timer timeout constant, 10 ms. */ +#define ASD_DEV_PRESENT_TIMEOUT 0x2710 + +#define ASD_SATA_INTERLOCK_TIMEOUT 0 + +/* How long to wait before shutting down an STP connection, unless + * an STP target sent frame(s). 50 usec. + * IGNORED by the sequencer (i.e. value 0 always). + */ +#define ASD_STP_SHUTDOWN_TIMEOUT 0x0 + +/* ATA soft reset timer timeout. 5 usec. */ +#define ASD_SRST_ASSERT_TIMEOUT 0x05 + +/* 31 sec */ +#define ASD_RCV_FIS_TIMEOUT 0x01D905C0 + +#define ASD_ONE_MILLISEC_TIMEOUT 0x03e8 + +/* COMINIT timer */ +#define ASD_TEN_MILLISEC_TIMEOUT 0x2710 +#define ASD_COMINIT_TIMEOUT ASD_TEN_MILLISEC_TIMEOUT + +/* 1 sec */ +#define ASD_SMP_RCV_TIMEOUT 0x000F4240 + +#endif diff --git a/drivers/scsi/aic94xx/aic94xx_scb.c b/drivers/scsi/aic94xx/aic94xx_scb.c new file mode 100644 index 00000000000..7ee49b51b72 --- /dev/null +++ b/drivers/scsi/aic94xx/aic94xx_scb.c @@ -0,0 +1,758 @@ +/* + * Aic94xx SAS/SATA driver SCB management. + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This file is part of the aic94xx driver. + * + * The aic94xx driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * The aic94xx driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the aic94xx driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include <linux/pci.h> + +#include "aic94xx.h" +#include "aic94xx_reg.h" +#include "aic94xx_hwi.h" +#include "aic94xx_seq.h" + +#include "aic94xx_dump.h" + +/* ---------- EMPTY SCB ---------- */ + +#define DL_PHY_MASK 7 +#define BYTES_DMAED 0 +#define PRIMITIVE_RECVD 0x08 +#define PHY_EVENT 0x10 +#define LINK_RESET_ERROR 0x18 +#define TIMER_EVENT 0x20 +#define REQ_TASK_ABORT 0xF0 +#define REQ_DEVICE_RESET 0xF1 +#define SIGNAL_NCQ_ERROR 0xF2 +#define CLEAR_NCQ_ERROR 0xF3 + +#define PHY_EVENTS_STATUS (CURRENT_LOSS_OF_SIGNAL | CURRENT_OOB_DONE \ + | CURRENT_SPINUP_HOLD | CURRENT_GTO_TIMEOUT \ + | CURRENT_OOB_ERROR) + +static inline void get_lrate_mode(struct asd_phy *phy, u8 oob_mode) +{ + struct sas_phy *sas_phy = phy->sas_phy.phy; + + switch (oob_mode & 7) { + case PHY_SPEED_60: + /* FIXME: sas transport class doesn't have this */ + phy->sas_phy.linkrate = SAS_LINK_RATE_6_0_GBPS; + phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS; + break; + case PHY_SPEED_30: + phy->sas_phy.linkrate = SAS_LINK_RATE_3_0_GBPS; + phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS; + break; + case PHY_SPEED_15: + phy->sas_phy.linkrate = SAS_LINK_RATE_1_5_GBPS; + phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS; + break; + } + sas_phy->negotiated_linkrate = phy->sas_phy.linkrate; + sas_phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS; + sas_phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS; + sas_phy->maximum_linkrate = phy->phy_desc->max_sas_lrate; + sas_phy->minimum_linkrate = phy->phy_desc->min_sas_lrate; + + if (oob_mode & SAS_MODE) + phy->sas_phy.oob_mode = SAS_OOB_MODE; + else if (oob_mode & SATA_MODE) + phy->sas_phy.oob_mode = SATA_OOB_MODE; +} + +static inline void asd_phy_event_tasklet(struct asd_ascb *ascb, + struct done_list_struct *dl) +{ + struct asd_ha_struct *asd_ha = ascb->ha; + struct sas_ha_struct *sas_ha = &asd_ha->sas_ha; + int phy_id = dl->status_block[0] & DL_PHY_MASK; + struct asd_phy *phy = &asd_ha->phys[phy_id]; + + u8 oob_status = dl->status_block[1] & PHY_EVENTS_STATUS; + u8 oob_mode = dl->status_block[2]; + + switch (oob_status) { + case CURRENT_LOSS_OF_SIGNAL: + /* directly attached device was removed */ + ASD_DPRINTK("phy%d: device unplugged\n", phy_id); + asd_turn_led(asd_ha, phy_id, 0); + sas_phy_disconnected(&phy->sas_phy); + sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL); + break; + case CURRENT_OOB_DONE: + /* hot plugged device */ + asd_turn_led(asd_ha, phy_id, 1); + get_lrate_mode(phy, oob_mode); + ASD_DPRINTK("phy%d device plugged: lrate:0x%x, proto:0x%x\n", + phy_id, phy->sas_phy.linkrate, phy->sas_phy.iproto); + sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE); + break; + case CURRENT_SPINUP_HOLD: + /* hot plug SATA, no COMWAKE sent */ + asd_turn_led(asd_ha, phy_id, 1); + sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD); + break; + case CURRENT_GTO_TIMEOUT: + case CURRENT_OOB_ERROR: + ASD_DPRINTK("phy%d error while OOB: oob status:0x%x\n", phy_id, + dl->status_block[1]); + asd_turn_led(asd_ha, phy_id, 0); + sas_phy_disconnected(&phy->sas_phy); + sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR); + break; + } +} + +/* If phys are enabled sparsely, this will do the right thing. */ +static inline unsigned ord_phy(struct asd_ha_struct *asd_ha, + struct asd_phy *phy) +{ + u8 enabled_mask = asd_ha->hw_prof.enabled_phys; + int i, k = 0; + + for_each_phy(enabled_mask, enabled_mask, i) { + if (&asd_ha->phys[i] == phy) + return k; + k++; + } + return 0; +} + +/** + * asd_get_attached_sas_addr -- extract/generate attached SAS address + * phy: pointer to asd_phy + * sas_addr: pointer to buffer where the SAS address is to be written + * + * This function extracts the SAS address from an IDENTIFY frame + * received. If OOB is SATA, then a SAS address is generated from the + * HA tables. + * + * LOCKING: the frame_rcvd_lock needs to be held since this parses the frame + * buffer. + */ +static inline void asd_get_attached_sas_addr(struct asd_phy *phy, u8 *sas_addr) +{ + if (phy->sas_phy.frame_rcvd[0] == 0x34 + && phy->sas_phy.oob_mode == SATA_OOB_MODE) { + struct asd_ha_struct *asd_ha = phy->sas_phy.ha->lldd_ha; + /* FIS device-to-host */ + u64 addr = be64_to_cpu(*(__be64 *)phy->phy_desc->sas_addr); + + addr += asd_ha->hw_prof.sata_name_base + ord_phy(asd_ha, phy); + *(__be64 *)sas_addr = cpu_to_be64(addr); + } else { + struct sas_identify_frame *idframe = + (void *) phy->sas_phy.frame_rcvd; + memcpy(sas_addr, idframe->sas_addr, SAS_ADDR_SIZE); + } +} + +static inline void asd_bytes_dmaed_tasklet(struct asd_ascb *ascb, + struct done_list_struct *dl, + int edb_id, int phy_id) +{ + unsigned long flags; + int edb_el = edb_id + ascb->edb_index; + struct asd_dma_tok *edb = ascb->ha->seq.edb_arr[edb_el]; + struct asd_phy *phy = &ascb->ha->phys[phy_id]; + struct sas_ha_struct *sas_ha = phy->sas_phy.ha; + u16 size = ((dl->status_block[3] & 7) << 8) | dl->status_block[2]; + + size = min(size, (u16) sizeof(phy->frame_rcvd)); + + spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags); + memcpy(phy->sas_phy.frame_rcvd, edb->vaddr, size); + phy->sas_phy.frame_rcvd_size = size; + asd_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr); + spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags); + asd_dump_frame_rcvd(phy, dl); + sas_ha->notify_port_event(&phy->sas_phy, PORTE_BYTES_DMAED); +} + +static inline void asd_link_reset_err_tasklet(struct asd_ascb *ascb, + struct done_list_struct *dl, + int phy_id) +{ + struct asd_ha_struct *asd_ha = ascb->ha; + struct sas_ha_struct *sas_ha = &asd_ha->sas_ha; + struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id]; + u8 lr_error = dl->status_block[1]; + u8 retries_left = dl->status_block[2]; + + switch (lr_error) { + case 0: + ASD_DPRINTK("phy%d: Receive ID timer expired\n", phy_id); + break; + case 1: + ASD_DPRINTK("phy%d: Loss of signal\n", phy_id); + break; + case 2: + ASD_DPRINTK("phy%d: Loss of dword sync\n", phy_id); + break; + case 3: + ASD_DPRINTK("phy%d: Receive FIS timeout\n", phy_id); + break; + default: + ASD_DPRINTK("phy%d: unknown link reset error code: 0x%x\n", + phy_id, lr_error); + break; + } + + asd_turn_led(asd_ha, phy_id, 0); + sas_phy_disconnected(sas_phy); + sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); + + if (retries_left == 0) { + int num = 1; + struct asd_ascb *cp = asd_ascb_alloc_list(ascb->ha, &num, + GFP_ATOMIC); + if (!cp) { + asd_printk("%s: out of memory\n", __FUNCTION__); + goto out; + } + ASD_DPRINTK("phy%d: retries:0 performing link reset seq\n", + phy_id); + asd_build_control_phy(cp, phy_id, ENABLE_PHY); + if (asd_post_ascb_list(ascb->ha, cp, 1) != 0) + asd_ascb_free(cp); + } +out: + ; +} + +static inline void asd_primitive_rcvd_tasklet(struct asd_ascb *ascb, + struct done_list_struct *dl, + int phy_id) +{ + unsigned long flags; + struct sas_ha_struct *sas_ha = &ascb->ha->sas_ha; + struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id]; + u8 reg = dl->status_block[1]; + u32 cont = dl->status_block[2] << ((reg & 3)*8); + + reg &= ~3; + switch (reg) { + case LmPRMSTAT0BYTE0: + switch (cont) { + case LmBROADCH: + case LmBROADRVCH0: + case LmBROADRVCH1: + case LmBROADSES: + ASD_DPRINTK("phy%d: BROADCAST change received:%d\n", + phy_id, cont); + spin_lock_irqsave(&sas_phy->sas_prim_lock, flags); + sas_phy->sas_prim = ffs(cont); + spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags); + sas_ha->notify_port_event(sas_phy,PORTE_BROADCAST_RCVD); + break; + + case LmUNKNOWNP: + ASD_DPRINTK("phy%d: unknown BREAK\n", phy_id); + break; + + default: + ASD_DPRINTK("phy%d: primitive reg:0x%x, cont:0x%04x\n", + phy_id, reg, cont); + break; + } + break; + case LmPRMSTAT1BYTE0: + switch (cont) { + case LmHARDRST: + ASD_DPRINTK("phy%d: HARD_RESET primitive rcvd\n", + phy_id); + /* The sequencer disables all phys on that port. + * We have to re-enable the phys ourselves. */ + sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET); + break; + + default: + ASD_DPRINTK("phy%d: primitive reg:0x%x, cont:0x%04x\n", + phy_id, reg, cont); + break; + } + break; + default: + ASD_DPRINTK("unknown primitive register:0x%x\n", + dl->status_block[1]); + break; + } +} + +/** + * asd_invalidate_edb -- invalidate an EDB and if necessary post the ESCB + * @ascb: pointer to Empty SCB + * @edb_id: index [0,6] to the empty data buffer which is to be invalidated + * + * After an EDB has been invalidated, if all EDBs in this ESCB have been + * invalidated, the ESCB is posted back to the sequencer. + * Context is tasklet/IRQ. + */ +void asd_invalidate_edb(struct asd_ascb *ascb, int edb_id) +{ + struct asd_seq_data *seq = &ascb->ha->seq; + struct empty_scb *escb = &ascb->scb->escb; + struct sg_el *eb = &escb->eb[edb_id]; + struct asd_dma_tok *edb = seq->edb_arr[ascb->edb_index + edb_id]; + + memset(edb->vaddr, 0, ASD_EDB_SIZE); + eb->flags |= ELEMENT_NOT_VALID; + escb->num_valid--; + + if (escb->num_valid == 0) { + int i; + /* ASD_DPRINTK("reposting escb: vaddr: 0x%p, " + "dma_handle: 0x%08llx, next: 0x%08llx, " + "index:%d, opcode:0x%02x\n", + ascb->dma_scb.vaddr, + (u64)ascb->dma_scb.dma_handle, + le64_to_cpu(ascb->scb->header.next_scb), + le16_to_cpu(ascb->scb->header.index), + ascb->scb->header.opcode); + */ + escb->num_valid = ASD_EDBS_PER_SCB; + for (i = 0; i < ASD_EDBS_PER_SCB; i++) + escb->eb[i].flags = 0; + if (!list_empty(&ascb->list)) + list_del_init(&ascb->list); + i = asd_post_escb_list(ascb->ha, ascb, 1); + if (i) + asd_printk("couldn't post escb, err:%d\n", i); + } +} + +static void escb_tasklet_complete(struct asd_ascb *ascb, + struct done_list_struct *dl) +{ + struct asd_ha_struct *asd_ha = ascb->ha; + struct sas_ha_struct *sas_ha = &asd_ha->sas_ha; + int edb = (dl->opcode & DL_PHY_MASK) - 1; /* [0xc1,0xc7] -> [0,6] */ + u8 sb_opcode = dl->status_block[0]; + int phy_id = sb_opcode & DL_PHY_MASK; + struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id]; + + if (edb > 6 || edb < 0) { + ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n", + edb, dl->opcode); + ASD_DPRINTK("sb_opcode : 0x%x, phy_id: 0x%x\n", + sb_opcode, phy_id); + ASD_DPRINTK("escb: vaddr: 0x%p, " + "dma_handle: 0x%llx, next: 0x%llx, " + "index:%d, opcode:0x%02x\n", + ascb->dma_scb.vaddr, + (unsigned long long)ascb->dma_scb.dma_handle, + (unsigned long long) + le64_to_cpu(ascb->scb->header.next_scb), + le16_to_cpu(ascb->scb->header.index), + ascb->scb->header.opcode); + } + + sb_opcode &= ~DL_PHY_MASK; + + switch (sb_opcode) { + case BYTES_DMAED: + ASD_DPRINTK("%s: phy%d: BYTES_DMAED\n", __FUNCTION__, phy_id); + asd_bytes_dmaed_tasklet(ascb, dl, edb, phy_id); + break; + case PRIMITIVE_RECVD: + ASD_DPRINTK("%s: phy%d: PRIMITIVE_RECVD\n", __FUNCTION__, + phy_id); + asd_primitive_rcvd_tasklet(ascb, dl, phy_id); + break; + case PHY_EVENT: + ASD_DPRINTK("%s: phy%d: PHY_EVENT\n", __FUNCTION__, phy_id); + asd_phy_event_tasklet(ascb, dl); + break; + case LINK_RESET_ERROR: + ASD_DPRINTK("%s: phy%d: LINK_RESET_ERROR\n", __FUNCTION__, + phy_id); + asd_link_reset_err_tasklet(ascb, dl, phy_id); + break; + case TIMER_EVENT: + ASD_DPRINTK("%s: phy%d: TIMER_EVENT, lost dw sync\n", + __FUNCTION__, phy_id); + asd_turn_led(asd_ha, phy_id, 0); + /* the device is gone */ + sas_phy_disconnected(sas_phy); + sas_ha->notify_port_event(sas_phy, PORTE_TIMER_EVENT); + break; + case REQ_TASK_ABORT: + ASD_DPRINTK("%s: phy%d: REQ_TASK_ABORT\n", __FUNCTION__, + phy_id); + break; + case REQ_DEVICE_RESET: + ASD_DPRINTK("%s: phy%d: REQ_DEVICE_RESET\n", __FUNCTION__, + phy_id); + break; + case SIGNAL_NCQ_ERROR: + ASD_DPRINTK("%s: phy%d: SIGNAL_NCQ_ERROR\n", __FUNCTION__, + phy_id); + break; + case CLEAR_NCQ_ERROR: + ASD_DPRINTK("%s: phy%d: CLEAR_NCQ_ERROR\n", __FUNCTION__, + phy_id); + break; + default: + ASD_DPRINTK("%s: phy%d: unknown event:0x%x\n", __FUNCTION__, + phy_id, sb_opcode); + ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n", + edb, dl->opcode); + ASD_DPRINTK("sb_opcode : 0x%x, phy_id: 0x%x\n", + sb_opcode, phy_id); + ASD_DPRINTK("escb: vaddr: 0x%p, " + "dma_handle: 0x%llx, next: 0x%llx, " + "index:%d, opcode:0x%02x\n", + ascb->dma_scb.vaddr, + (unsigned long long)ascb->dma_scb.dma_handle, + (unsigned long long) + le64_to_cpu(ascb->scb->header.next_scb), + le16_to_cpu(ascb->scb->header.index), + ascb->scb->header.opcode); + + break; + } + + asd_invalidate_edb(ascb, edb); +} + +int asd_init_post_escbs(struct asd_ha_struct *asd_ha) +{ + struct asd_seq_data *seq = &asd_ha->seq; + int i; + + for (i = 0; i < seq->num_escbs; i++) + seq->escb_arr[i]->tasklet_complete = escb_tasklet_complete; + + ASD_DPRINTK("posting %d escbs\n", i); + return asd_post_escb_list(asd_ha, seq->escb_arr[0], seq->num_escbs); +} + +/* ---------- CONTROL PHY ---------- */ + +#define CONTROL_PHY_STATUS (CURRENT_DEVICE_PRESENT | CURRENT_OOB_DONE \ + | CURRENT_SPINUP_HOLD | CURRENT_GTO_TIMEOUT \ + | CURRENT_OOB_ERROR) + +/** + * control_phy_tasklet_complete -- tasklet complete for CONTROL PHY ascb + * @ascb: pointer to an ascb + * @dl: pointer to the done list entry + * + * This function completes a CONTROL PHY scb and frees the ascb. + * A note on LEDs: + * - an LED blinks if there is IO though it, + * - if a device is connected to the LED, it is lit, + * - if no device is connected to the LED, is is dimmed (off). + */ +static void control_phy_tasklet_complete(struct asd_ascb *ascb, + struct done_list_struct *dl) +{ + struct asd_ha_struct *asd_ha = ascb->ha; + struct scb *scb = ascb->scb; + struct control_phy *control_phy = &scb->control_phy; + u8 phy_id = control_phy->phy_id; + struct asd_phy *phy = &ascb->ha->phys[phy_id]; + + u8 status = dl->status_block[0]; + u8 oob_status = dl->status_block[1]; + u8 oob_mode = dl->status_block[2]; + /* u8 oob_signals= dl->status_block[3]; */ + + if (status != 0) { + ASD_DPRINTK("%s: phy%d status block opcode:0x%x\n", + __FUNCTION__, phy_id, status); + goto out; + } + + switch (control_phy->sub_func) { + case DISABLE_PHY: + asd_ha->hw_prof.enabled_phys &= ~(1 << phy_id); + asd_turn_led(asd_ha, phy_id, 0); + asd_control_led(asd_ha, phy_id, 0); + ASD_DPRINTK("%s: disable phy%d\n", __FUNCTION__, phy_id); + break; + + case ENABLE_PHY: + asd_control_led(asd_ha, phy_id, 1); + if (oob_status & CURRENT_OOB_DONE) { + asd_ha->hw_prof.enabled_phys |= (1 << phy_id); + get_lrate_mode(phy, oob_mode); + asd_turn_led(asd_ha, phy_id, 1); + ASD_DPRINTK("%s: phy%d, lrate:0x%x, proto:0x%x\n", + __FUNCTION__, phy_id,phy->sas_phy.linkrate, + phy->sas_phy.iproto); + } else if (oob_status & CURRENT_SPINUP_HOLD) { + asd_ha->hw_prof.enabled_phys |= (1 << phy_id); + asd_turn_led(asd_ha, phy_id, 1); + ASD_DPRINTK("%s: phy%d, spinup hold\n", __FUNCTION__, + phy_id); + } else if (oob_status & CURRENT_ERR_MASK) { + asd_turn_led(asd_ha, phy_id, 0); + ASD_DPRINTK("%s: phy%d: error: oob status:0x%02x\n", + __FUNCTION__, phy_id, oob_status); + } else if (oob_status & (CURRENT_HOT_PLUG_CNCT + | CURRENT_DEVICE_PRESENT)) { + asd_ha->hw_prof.enabled_phys |= (1 << phy_id); + asd_turn_led(asd_ha, phy_id, 1); + ASD_DPRINTK("%s: phy%d: hot plug or device present\n", + __FUNCTION__, phy_id); + } else { + asd_ha->hw_prof.enabled_phys |= (1 << phy_id); + asd_turn_led(asd_ha, phy_id, 0); + ASD_DPRINTK("%s: phy%d: no device present: " + "oob_status:0x%x\n", + __FUNCTION__, phy_id, oob_status); + } + break; + case RELEASE_SPINUP_HOLD: + case PHY_NO_OP: + case EXECUTE_HARD_RESET: + ASD_DPRINTK("%s: phy%d: sub_func:0x%x\n", __FUNCTION__, + phy_id, control_phy->sub_func); + /* XXX finish */ + break; + default: + ASD_DPRINTK("%s: phy%d: sub_func:0x%x?\n", __FUNCTION__, + phy_id, control_phy->sub_func); + break; + } +out: + asd_ascb_free(ascb); +} + +static inline void set_speed_mask(u8 *speed_mask, struct asd_phy_desc *pd) +{ + /* disable all speeds, then enable defaults */ + *speed_mask = SAS_SPEED_60_DIS | SAS_SPEED_30_DIS | SAS_SPEED_15_DIS + | SATA_SPEED_30_DIS | SATA_SPEED_15_DIS; + + switch (pd->max_sas_lrate) { + case SAS_LINK_RATE_6_0_GBPS: + *speed_mask &= ~SAS_SPEED_60_DIS; + default: + case SAS_LINK_RATE_3_0_GBPS: + *speed_mask &= ~SAS_SPEED_30_DIS; + case SAS_LINK_RATE_1_5_GBPS: + *speed_mask &= ~SAS_SPEED_15_DIS; + } + + switch (pd->min_sas_lrate) { + case SAS_LINK_RATE_6_0_GBPS: + *speed_mask |= SAS_SPEED_30_DIS; + case SAS_LINK_RATE_3_0_GBPS: + *speed_mask |= SAS_SPEED_15_DIS; + default: + case SAS_LINK_RATE_1_5_GBPS: + /* nothing to do */ + ; + } + + switch (pd->max_sata_lrate) { + case SAS_LINK_RATE_3_0_GBPS: + *speed_mask &= ~SATA_SPEED_30_DIS; + default: + case SAS_LINK_RATE_1_5_GBPS: + *speed_mask &= ~SATA_SPEED_15_DIS; + } + + switch (pd->min_sata_lrate) { + case SAS_LINK_RATE_3_0_GBPS: + *speed_mask |= SATA_SPEED_15_DIS; + default: + case SAS_LINK_RATE_1_5_GBPS: + /* nothing to do */ + ; + } +} + +/** + * asd_build_control_phy -- build a CONTROL PHY SCB + * @ascb: pointer to an ascb + * @phy_id: phy id to control, integer + * @subfunc: subfunction, what to actually to do the phy + * + * This function builds a CONTROL PHY scb. No allocation of any kind + * is performed. @ascb is allocated with the list function. + * The caller can override the ascb->tasklet_complete to point + * to its own callback function. It must call asd_ascb_free() + * at its tasklet complete function. + * See the default implementation. + */ +void asd_build_control_phy(struct asd_ascb *ascb, int phy_id, u8 subfunc) +{ + struct asd_phy *phy = &ascb->ha->phys[phy_id]; + struct scb *scb = ascb->scb; + struct control_phy *control_phy = &scb->control_phy; + + scb->header.opcode = CONTROL_PHY; + control_phy->phy_id = (u8) phy_id; + control_phy->sub_func = subfunc; + + switch (subfunc) { + case EXECUTE_HARD_RESET: /* 0x81 */ + case ENABLE_PHY: /* 0x01 */ + /* decide hot plug delay */ + control_phy->hot_plug_delay = HOTPLUG_DELAY_TIMEOUT; + + /* decide speed mask */ + set_speed_mask(&control_phy->speed_mask, phy->phy_desc); + + /* initiator port settings are in the hi nibble */ + if (phy->sas_phy.role == PHY_ROLE_INITIATOR) + control_phy->port_type = SAS_PROTO_ALL << 4; + else if (phy->sas_phy.role == PHY_ROLE_TARGET) + control_phy->port_type = SAS_PROTO_ALL; + else + control_phy->port_type = + (SAS_PROTO_ALL << 4) | SAS_PROTO_ALL; + + /* link reset retries, this should be nominal */ + control_phy->link_reset_retries = 10; + + case RELEASE_SPINUP_HOLD: /* 0x02 */ + /* decide the func_mask */ + control_phy->func_mask = FUNCTION_MASK_DEFAULT; + if (phy->phy_desc->flags & ASD_SATA_SPINUP_HOLD) + control_phy->func_mask &= ~SPINUP_HOLD_DIS; + else + control_phy->func_mask |= SPINUP_HOLD_DIS; + } + + control_phy->conn_handle = cpu_to_le16(0xFFFF); + + ascb->tasklet_complete = control_phy_tasklet_complete; +} + +/* ---------- INITIATE LINK ADM TASK ---------- */ + +static void link_adm_tasklet_complete(struct asd_ascb *ascb, + struct done_list_struct *dl) +{ + u8 opcode = dl->opcode; + struct initiate_link_adm *link_adm = &ascb->scb->link_adm; + u8 phy_id = link_adm->phy_id; + + if (opcode != TC_NO_ERROR) { + asd_printk("phy%d: link adm task 0x%x completed with error " + "0x%x\n", phy_id, link_adm->sub_func, opcode); + } + ASD_DPRINTK("phy%d: link adm task 0x%x: 0x%x\n", + phy_id, link_adm->sub_func, opcode); + + asd_ascb_free(ascb); +} + +void asd_build_initiate_link_adm_task(struct asd_ascb *ascb, int phy_id, + u8 subfunc) +{ + struct scb *scb = ascb->scb; + struct initiate_link_adm *link_adm = &scb->link_adm; + + scb->header.opcode = INITIATE_LINK_ADM_TASK; + + link_adm->phy_id = phy_id; + link_adm->sub_func = subfunc; + link_adm->conn_handle = cpu_to_le16(0xFFFF); + + ascb->tasklet_complete = link_adm_tasklet_complete; +} + +/* ---------- SCB timer ---------- */ + +/** + * asd_ascb_timedout -- called when a pending SCB's timer has expired + * @data: unsigned long, a pointer to the ascb in question + * + * This is the default timeout function which does the most necessary. + * Upper layers can implement their own timeout function, say to free + * resources they have with this SCB, and then call this one at the + * end of their timeout function. To do this, one should initialize + * the ascb->timer.{function, data, expires} prior to calling the post + * funcion. The timer is started by the post function. + */ +void asd_ascb_timedout(unsigned long data) +{ + struct asd_ascb *ascb = (void *) data; + struct asd_seq_data *seq = &ascb->ha->seq; + unsigned long flags; + + ASD_DPRINTK("scb:0x%x timed out\n", ascb->scb->header.opcode); + + spin_lock_irqsave(&seq->pend_q_lock, flags); + seq->pending--; + list_del_init(&ascb->list); + spin_unlock_irqrestore(&seq->pend_q_lock, flags); + + asd_ascb_free(ascb); +} + +/* ---------- CONTROL PHY ---------- */ + +/* Given the spec value, return a driver value. */ +static const int phy_func_table[] = { + [PHY_FUNC_NOP] = PHY_NO_OP, + [PHY_FUNC_LINK_RESET] = ENABLE_PHY, + [PHY_FUNC_HARD_RESET] = EXECUTE_HARD_RESET, + [PHY_FUNC_DISABLE] = DISABLE_PHY, + [PHY_FUNC_RELEASE_SPINUP_HOLD] = RELEASE_SPINUP_HOLD, +}; + +int asd_control_phy(struct asd_sas_phy *phy, enum phy_func func, void *arg) +{ + struct asd_ha_struct *asd_ha = phy->ha->lldd_ha; + struct asd_phy_desc *pd = asd_ha->phys[phy->id].phy_desc; + struct asd_ascb *ascb; + struct sas_phy_linkrates *rates; + int res = 1; + + switch (func) { + case PHY_FUNC_CLEAR_ERROR_LOG: + return -ENOSYS; + case PHY_FUNC_SET_LINK_RATE: + rates = arg; + if (rates->minimum_linkrate) { + pd->min_sas_lrate = rates->minimum_linkrate; + pd->min_sata_lrate = rates->minimum_linkrate; + } + if (rates->maximum_linkrate) { + pd->max_sas_lrate = rates->maximum_linkrate; + pd->max_sata_lrate = rates->maximum_linkrate; + } + func = PHY_FUNC_LINK_RESET; + break; + default: + break; + } + + ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL); + if (!ascb) + return -ENOMEM; + + asd_build_control_phy(ascb, phy->id, phy_func_table[func]); + res = asd_post_ascb_list(asd_ha, ascb , 1); + if (res) + asd_ascb_free(ascb); + + return res; +} diff --git a/drivers/scsi/aic94xx/aic94xx_sds.c b/drivers/scsi/aic94xx/aic94xx_sds.c new file mode 100644 index 00000000000..83574b5b4e6 --- /dev/null +++ b/drivers/scsi/aic94xx/aic94xx_sds.c @@ -0,0 +1,1089 @@ +/* + * Aic94xx SAS/SATA driver access to shared data structures and memory + * maps. + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This file is part of the aic94xx driver. + * + * The aic94xx driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * The aic94xx driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the aic94xx driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include <linux/pci.h> +#include <linux/delay.h> + +#include "aic94xx.h" +#include "aic94xx_reg.h" + +/* ---------- OCM stuff ---------- */ + +struct asd_ocm_dir_ent { + u8 type; + u8 offs[3]; + u8 _r1; + u8 size[3]; +} __attribute__ ((packed)); + +struct asd_ocm_dir { + char sig[2]; + u8 _r1[2]; + u8 major; /* 0 */ + u8 minor; /* 0 */ + u8 _r2; + u8 num_de; + struct asd_ocm_dir_ent entry[15]; +} __attribute__ ((packed)); + +#define OCM_DE_OCM_DIR 0x00 +#define OCM_DE_WIN_DRVR 0x01 +#define OCM_DE_BIOS_CHIM 0x02 +#define OCM_DE_RAID_ENGN 0x03 +#define OCM_DE_BIOS_INTL 0x04 +#define OCM_DE_BIOS_CHIM_OSM 0x05 +#define OCM_DE_BIOS_CHIM_DYNAMIC 0x06 +#define OCM_DE_ADDC2C_RES0 0x07 +#define OCM_DE_ADDC2C_RES1 0x08 +#define OCM_DE_ADDC2C_RES2 0x09 +#define OCM_DE_ADDC2C_RES3 0x0A + +#define OCM_INIT_DIR_ENTRIES 5 +/*************************************************************************** +* OCM dircetory default +***************************************************************************/ +static struct asd_ocm_dir OCMDirInit = +{ + .sig = {0x4D, 0x4F}, /* signature */ + .num_de = OCM_INIT_DIR_ENTRIES, /* no. of directory entries */ +}; + +/*************************************************************************** +* OCM dircetory Entries default +***************************************************************************/ +static struct asd_ocm_dir_ent OCMDirEntriesInit[OCM_INIT_DIR_ENTRIES] = +{ + { + .type = (OCM_DE_ADDC2C_RES0), /* Entry type */ + .offs = {128}, /* Offset */ + .size = {0, 4}, /* size */ + }, + { + .type = (OCM_DE_ADDC2C_RES1), /* Entry type */ + .offs = {128, 4}, /* Offset */ + .size = {0, 4}, /* size */ + }, + { + .type = (OCM_DE_ADDC2C_RES2), /* Entry type */ + .offs = {128, 8}, /* Offset */ + .size = {0, 4}, /* size */ + }, + { + .type = (OCM_DE_ADDC2C_RES3), /* Entry type */ + .offs = {128, 12}, /* Offset */ + .size = {0, 4}, /* size */ + }, + { + .type = (OCM_DE_WIN_DRVR), /* Entry type */ + .offs = {128, 16}, /* Offset */ + .size = {128, 235, 1}, /* size */ + }, +}; + +struct asd_bios_chim_struct { + char sig[4]; + u8 major; /* 1 */ + u8 minor; /* 0 */ + u8 bios_major; + u8 bios_minor; + __le32 bios_build; + u8 flags; + u8 pci_slot; + __le16 ue_num; + __le16 ue_size; + u8 _r[14]; + /* The unit element array is right here. + */ +} __attribute__ ((packed)); + +/** + * asd_read_ocm_seg - read an on chip memory (OCM) segment + * @asd_ha: pointer to the host adapter structure + * @buffer: where to write the read data + * @offs: offset into OCM where to read from + * @size: how many bytes to read + * + * Return the number of bytes not read. Return 0 on success. + */ +static int asd_read_ocm_seg(struct asd_ha_struct *asd_ha, void *buffer, + u32 offs, int size) +{ + u8 *p = buffer; + if (unlikely(asd_ha->iospace)) + asd_read_reg_string(asd_ha, buffer, offs+OCM_BASE_ADDR, size); + else { + for ( ; size > 0; size--, offs++, p++) + *p = asd_read_ocm_byte(asd_ha, offs); + } + return size; +} + +static int asd_read_ocm_dir(struct asd_ha_struct *asd_ha, + struct asd_ocm_dir *dir, u32 offs) +{ + int err = asd_read_ocm_seg(asd_ha, dir, offs, sizeof(*dir)); + if (err) { + ASD_DPRINTK("couldn't read ocm segment\n"); + return err; + } + + if (dir->sig[0] != 'M' || dir->sig[1] != 'O') { + ASD_DPRINTK("no valid dir signature(%c%c) at start of OCM\n", + dir->sig[0], dir->sig[1]); + return -ENOENT; + } + if (dir->major != 0) { + asd_printk("unsupported major version of ocm dir:0x%x\n", + dir->major); + return -ENOENT; + } + dir->num_de &= 0xf; + return 0; +} + +/** + * asd_write_ocm_seg - write an on chip memory (OCM) segment + * @asd_ha: pointer to the host adapter structure + * @buffer: where to read the write data + * @offs: offset into OCM to write to + * @size: how many bytes to write + * + * Return the number of bytes not written. Return 0 on success. + */ +static void asd_write_ocm_seg(struct asd_ha_struct *asd_ha, void *buffer, + u32 offs, int size) +{ + u8 *p = buffer; + if (unlikely(asd_ha->iospace)) + asd_write_reg_string(asd_ha, buffer, offs+OCM_BASE_ADDR, size); + else { + for ( ; size > 0; size--, offs++, p++) + asd_write_ocm_byte(asd_ha, offs, *p); + } + return; +} + +#define THREE_TO_NUM(X) ((X)[0] | ((X)[1] << 8) | ((X)[2] << 16)) + +static int asd_find_dir_entry(struct asd_ocm_dir *dir, u8 type, + u32 *offs, u32 *size) +{ + int i; + struct asd_ocm_dir_ent *ent; + + for (i = 0; i < dir->num_de; i++) { + if (dir->entry[i].type == type) + break; + } + if (i >= dir->num_de) + return -ENOENT; + ent = &dir->entry[i]; + *offs = (u32) THREE_TO_NUM(ent->offs); + *size = (u32) THREE_TO_NUM(ent->size); + return 0; +} + +#define OCM_BIOS_CHIM_DE 2 +#define BC_BIOS_PRESENT 1 + +static int asd_get_bios_chim(struct asd_ha_struct *asd_ha, + struct asd_ocm_dir *dir) +{ + int err; + struct asd_bios_chim_struct *bc_struct; + u32 offs, size; + + err = asd_find_dir_entry(dir, OCM_BIOS_CHIM_DE, &offs, &size); + if (err) { + ASD_DPRINTK("couldn't find BIOS_CHIM dir ent\n"); + goto out; + } + err = -ENOMEM; + bc_struct = kmalloc(sizeof(*bc_struct), GFP_KERNEL); + if (!bc_struct) { + asd_printk("no memory for bios_chim struct\n"); + goto out; + } + err = asd_read_ocm_seg(asd_ha, (void *)bc_struct, offs, + sizeof(*bc_struct)); + if (err) { + ASD_DPRINTK("couldn't read ocm segment\n"); + goto out2; + } + if (strncmp(bc_struct->sig, "SOIB", 4) + && strncmp(bc_struct->sig, "IPSA", 4)) { + ASD_DPRINTK("BIOS_CHIM entry has no valid sig(%c%c%c%c)\n", + bc_struct->sig[0], bc_struct->sig[1], + bc_struct->sig[2], bc_struct->sig[3]); + err = -ENOENT; + goto out2; + } + if (bc_struct->major != 1) { + asd_printk("BIOS_CHIM unsupported major version:0x%x\n", + bc_struct->major); + err = -ENOENT; + goto out2; + } + if (bc_struct->flags & BC_BIOS_PRESENT) { + asd_ha->hw_prof.bios.present = 1; + asd_ha->hw_prof.bios.maj = bc_struct->bios_major; + asd_ha->hw_prof.bios.min = bc_struct->bios_minor; + asd_ha->hw_prof.bios.bld = le32_to_cpu(bc_struct->bios_build); + ASD_DPRINTK("BIOS present (%d,%d), %d\n", + asd_ha->hw_prof.bios.maj, + asd_ha->hw_prof.bios.min, + asd_ha->hw_prof.bios.bld); + } + asd_ha->hw_prof.ue.num = le16_to_cpu(bc_struct->ue_num); + asd_ha->hw_prof.ue.size= le16_to_cpu(bc_struct->ue_size); + ASD_DPRINTK("ue num:%d, ue size:%d\n", asd_ha->hw_prof.ue.num, + asd_ha->hw_prof.ue.size); + size = asd_ha->hw_prof.ue.num * asd_ha->hw_prof.ue.size; + if (size > 0) { + err = -ENOMEM; + asd_ha->hw_prof.ue.area = kmalloc(size, GFP_KERNEL); + if (!asd_ha->hw_prof.ue.area) + goto out2; + err = asd_read_ocm_seg(asd_ha, (void *)asd_ha->hw_prof.ue.area, + offs + sizeof(*bc_struct), size); + if (err) { + kfree(asd_ha->hw_prof.ue.area); + asd_ha->hw_prof.ue.area = NULL; + asd_ha->hw_prof.ue.num = 0; + asd_ha->hw_prof.ue.size = 0; + ASD_DPRINTK("couldn't read ue entries(%d)\n", err); + } + } +out2: + kfree(bc_struct); +out: + return err; +} + +static void +asd_hwi_initialize_ocm_dir (struct asd_ha_struct *asd_ha) +{ + int i; + + /* Zero OCM */ + for (i = 0; i < OCM_MAX_SIZE; i += 4) + asd_write_ocm_dword(asd_ha, i, 0); + + /* Write Dir */ + asd_write_ocm_seg(asd_ha, &OCMDirInit, 0, + sizeof(struct asd_ocm_dir)); + + /* Write Dir Entries */ + for (i = 0; i < OCM_INIT_DIR_ENTRIES; i++) + asd_write_ocm_seg(asd_ha, &OCMDirEntriesInit[i], + sizeof(struct asd_ocm_dir) + + (i * sizeof(struct asd_ocm_dir_ent)) + , sizeof(struct asd_ocm_dir_ent)); + +} + +static int +asd_hwi_check_ocm_access (struct asd_ha_struct *asd_ha) +{ + struct pci_dev *pcidev = asd_ha->pcidev; + u32 reg; + int err = 0; + u32 v; + + /* check if OCM has been initialized by BIOS */ + reg = asd_read_reg_dword(asd_ha, EXSICNFGR); + + if (!(reg & OCMINITIALIZED)) { + err = pci_read_config_dword(pcidev, PCIC_INTRPT_STAT, &v); + if (err) { + asd_printk("couldn't access PCIC_INTRPT_STAT of %s\n", + pci_name(pcidev)); + goto out; + } + + printk(KERN_INFO "OCM is not initialized by BIOS," + "reinitialize it and ignore it, current IntrptStatus" + "is 0x%x\n", v); + + if (v) + err = pci_write_config_dword(pcidev, + PCIC_INTRPT_STAT, v); + if (err) { + asd_printk("couldn't write PCIC_INTRPT_STAT of %s\n", + pci_name(pcidev)); + goto out; + } + + asd_hwi_initialize_ocm_dir(asd_ha); + + } +out: + return err; +} + +/** + * asd_read_ocm - read on chip memory (OCM) + * @asd_ha: pointer to the host adapter structure + */ +int asd_read_ocm(struct asd_ha_struct *asd_ha) +{ + int err; + struct asd_ocm_dir *dir; + + if (asd_hwi_check_ocm_access(asd_ha)) + return -1; + + dir = kmalloc(sizeof(*dir), GFP_KERNEL); + if (!dir) { + asd_printk("no memory for ocm dir\n"); + return -ENOMEM; + } + + err = asd_read_ocm_dir(asd_ha, dir, 0); + if (err) + goto out; + + err = asd_get_bios_chim(asd_ha, dir); +out: + kfree(dir); + return err; +} + +/* ---------- FLASH stuff ---------- */ + +#define FLASH_RESET 0xF0 + +#define FLASH_SIZE 0x200000 +#define FLASH_DIR_COOKIE "*** ADAPTEC FLASH DIRECTORY *** " +#define FLASH_NEXT_ENTRY_OFFS 0x2000 +#define FLASH_MAX_DIR_ENTRIES 32 + +#define FLASH_DE_TYPE_MASK 0x3FFFFFFF +#define FLASH_DE_MS 0x120 +#define FLASH_DE_CTRL_A_USER 0xE0 + +struct asd_flash_de { + __le32 type; + __le32 offs; + __le32 pad_size; + __le32 image_size; + __le32 chksum; + u8 _r[12]; + u8 version[32]; +} __attribute__ ((packed)); + +struct asd_flash_dir { + u8 cookie[32]; + __le32 rev; /* 2 */ + __le32 chksum; + __le32 chksum_antidote; + __le32 bld; + u8 bld_id[32]; /* build id data */ + u8 ver_data[32]; /* date and time of build */ + __le32 ae_mask; + __le32 v_mask; + __le32 oc_mask; + u8 _r[20]; + struct asd_flash_de dir_entry[FLASH_MAX_DIR_ENTRIES]; +} __attribute__ ((packed)); + +struct asd_manuf_sec { + char sig[2]; /* 'S', 'M' */ + u16 offs_next; + u8 maj; /* 0 */ + u8 min; /* 0 */ + u16 chksum; + u16 size; + u8 _r[6]; + u8 sas_addr[SAS_ADDR_SIZE]; + u8 pcba_sn[ASD_PCBA_SN_SIZE]; + /* Here start the other segments */ + u8 linked_list[0]; +} __attribute__ ((packed)); + +struct asd_manuf_phy_desc { + u8 state; /* low 4 bits */ +#define MS_PHY_STATE_ENABLEABLE 0 +#define MS_PHY_STATE_REPORTED 1 +#define MS_PHY_STATE_HIDDEN 2 + u8 phy_id; + u16 _r; + u8 phy_control_0; /* mode 5 reg 0x160 */ + u8 phy_control_1; /* mode 5 reg 0x161 */ + u8 phy_control_2; /* mode 5 reg 0x162 */ + u8 phy_control_3; /* mode 5 reg 0x163 */ +} __attribute__ ((packed)); + +struct asd_manuf_phy_param { + char sig[2]; /* 'P', 'M' */ + u16 next; + u8 maj; /* 0 */ + u8 min; /* 2 */ + u8 num_phy_desc; /* 8 */ + u8 phy_desc_size; /* 8 */ + u8 _r[3]; + u8 usage_model_id; + u32 _r2; + struct asd_manuf_phy_desc phy_desc[ASD_MAX_PHYS]; +} __attribute__ ((packed)); + +#if 0 +static const char *asd_sb_type[] = { + "unknown", + "SGPIO", + [2 ... 0x7F] = "unknown", + [0x80] = "ADPT_I2C", + [0x81 ... 0xFF] = "VENDOR_UNIQUExx" +}; +#endif + +struct asd_ms_sb_desc { + u8 type; + u8 node_desc_index; + u8 conn_desc_index; + u8 _recvd[0]; +} __attribute__ ((packed)); + +#if 0 +static const char *asd_conn_type[] = { + [0 ... 7] = "unknown", + "SFF8470", + "SFF8482", + "SFF8484", + [0x80] = "PCIX_DAUGHTER0", + [0x81] = "SAS_DAUGHTER0", + [0x82 ... 0xFF] = "VENDOR_UNIQUExx" +}; + +static const char *asd_conn_location[] = { + "unknown", + "internal", + "external", + "board_to_board", +}; +#endif + +struct asd_ms_conn_desc { + u8 type; + u8 location; + u8 num_sideband_desc; + u8 size_sideband_desc; + u32 _resvd; + u8 name[16]; + struct asd_ms_sb_desc sb_desc[0]; +} __attribute__ ((packed)); + +struct asd_nd_phy_desc { + u8 vp_attch_type; + u8 attch_specific[0]; +} __attribute__ ((packed)); + +#if 0 +static const char *asd_node_type[] = { + "IOP", + "IO_CONTROLLER", + "EXPANDER", + "PORT_MULTIPLIER", + "PORT_MULTIPLEXER", + "MULTI_DROP_I2C_BUS", +}; +#endif + +struct asd_ms_node_desc { + u8 type; + u8 num_phy_desc; + u8 size_phy_desc; + u8 _resvd; + u8 name[16]; + struct asd_nd_phy_desc phy_desc[0]; +} __attribute__ ((packed)); + +struct asd_ms_conn_map { + char sig[2]; /* 'M', 'C' */ + __le16 next; + u8 maj; /* 0 */ + u8 min; /* 0 */ + __le16 cm_size; /* size of this struct */ + u8 num_conn; + u8 conn_size; + u8 num_nodes; + u8 usage_model_id; + u32 _resvd; + struct asd_ms_conn_desc conn_desc[0]; + struct asd_ms_node_desc node_desc[0]; +} __attribute__ ((packed)); + +struct asd_ctrla_phy_entry { + u8 sas_addr[SAS_ADDR_SIZE]; + u8 sas_link_rates; /* max in hi bits, min in low bits */ + u8 flags; + u8 sata_link_rates; + u8 _r[5]; +} __attribute__ ((packed)); + +struct asd_ctrla_phy_settings { + u8 id0; /* P'h'y */ + u8 _r; + u16 next; + u8 num_phys; /* number of PHYs in the PCI function */ + u8 _r2[3]; + struct asd_ctrla_phy_entry phy_ent[ASD_MAX_PHYS]; +} __attribute__ ((packed)); + +struct asd_ll_el { + u8 id0; + u8 id1; + __le16 next; + u8 something_here[0]; +} __attribute__ ((packed)); + +static int asd_poll_flash(struct asd_ha_struct *asd_ha) +{ + int c; + u8 d; + + for (c = 5000; c > 0; c--) { + d = asd_read_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar); + d ^= asd_read_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar); + if (!d) + return 0; + udelay(5); + } + return -ENOENT; +} + +static int asd_reset_flash(struct asd_ha_struct *asd_ha) +{ + int err; + + err = asd_poll_flash(asd_ha); + if (err) + return err; + asd_write_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar, FLASH_RESET); + err = asd_poll_flash(asd_ha); + + return err; +} + +static inline int asd_read_flash_seg(struct asd_ha_struct *asd_ha, + void *buffer, u32 offs, int size) +{ + asd_read_reg_string(asd_ha, buffer, asd_ha->hw_prof.flash.bar+offs, + size); + return 0; +} + +/** + * asd_find_flash_dir - finds and reads the flash directory + * @asd_ha: pointer to the host adapter structure + * @flash_dir: pointer to flash directory structure + * + * If found, the flash directory segment will be copied to + * @flash_dir. Return 1 if found, 0 if not. + */ +static int asd_find_flash_dir(struct asd_ha_struct *asd_ha, + struct asd_flash_dir *flash_dir) +{ + u32 v; + for (v = 0; v < FLASH_SIZE; v += FLASH_NEXT_ENTRY_OFFS) { + asd_read_flash_seg(asd_ha, flash_dir, v, + sizeof(FLASH_DIR_COOKIE)-1); + if (memcmp(flash_dir->cookie, FLASH_DIR_COOKIE, + sizeof(FLASH_DIR_COOKIE)-1) == 0) { + asd_ha->hw_prof.flash.dir_offs = v; + asd_read_flash_seg(asd_ha, flash_dir, v, + sizeof(*flash_dir)); + return 1; + } + } + return 0; +} + +static int asd_flash_getid(struct asd_ha_struct *asd_ha) +{ + int err = 0; + u32 reg; + + reg = asd_read_reg_dword(asd_ha, EXSICNFGR); + + if (!(reg & FLASHEX)) { + ASD_DPRINTK("flash doesn't exist\n"); + return -ENOENT; + } + if (pci_read_config_dword(asd_ha->pcidev, PCI_CONF_FLSH_BAR, + &asd_ha->hw_prof.flash.bar)) { + asd_printk("couldn't read PCI_CONF_FLSH_BAR of %s\n", + pci_name(asd_ha->pcidev)); + return -ENOENT; + } + asd_ha->hw_prof.flash.present = 1; + asd_ha->hw_prof.flash.wide = reg & FLASHW ? 1 : 0; + err = asd_reset_flash(asd_ha); + if (err) { + ASD_DPRINTK("couldn't reset flash(%d)\n", err); + return err; + } + return 0; +} + +static u16 asd_calc_flash_chksum(u16 *p, int size) +{ + u16 chksum = 0; + + while (size-- > 0) + chksum += *p++; + + return chksum; +} + + +static int asd_find_flash_de(struct asd_flash_dir *flash_dir, u32 entry_type, + u32 *offs, u32 *size) +{ + int i; + struct asd_flash_de *de; + + for (i = 0; i < FLASH_MAX_DIR_ENTRIES; i++) { + u32 type = le32_to_cpu(flash_dir->dir_entry[i].type); + + type &= FLASH_DE_TYPE_MASK; + if (type == entry_type) + break; + } + if (i >= FLASH_MAX_DIR_ENTRIES) + return -ENOENT; + de = &flash_dir->dir_entry[i]; + *offs = le32_to_cpu(de->offs); + *size = le32_to_cpu(de->pad_size); + return 0; +} + +static int asd_validate_ms(struct asd_manuf_sec *ms) +{ + if (ms->sig[0] != 'S' || ms->sig[1] != 'M') { + ASD_DPRINTK("manuf sec: no valid sig(%c%c)\n", + ms->sig[0], ms->sig[1]); + return -ENOENT; + } + if (ms->maj != 0) { + asd_printk("unsupported manuf. sector. major version:%x\n", + ms->maj); + return -ENOENT; + } + ms->offs_next = le16_to_cpu((__force __le16) ms->offs_next); + ms->chksum = le16_to_cpu((__force __le16) ms->chksum); + ms->size = le16_to_cpu((__force __le16) ms->size); + + if (asd_calc_flash_chksum((u16 *)ms, ms->size/2)) { + asd_printk("failed manuf sector checksum\n"); + } + + return 0; +} + +static int asd_ms_get_sas_addr(struct asd_ha_struct *asd_ha, + struct asd_manuf_sec *ms) +{ + memcpy(asd_ha->hw_prof.sas_addr, ms->sas_addr, SAS_ADDR_SIZE); + return 0; +} + +static int asd_ms_get_pcba_sn(struct asd_ha_struct *asd_ha, + struct asd_manuf_sec *ms) +{ + memcpy(asd_ha->hw_prof.pcba_sn, ms->pcba_sn, ASD_PCBA_SN_SIZE); + asd_ha->hw_prof.pcba_sn[ASD_PCBA_SN_SIZE] = '\0'; + return 0; +} + +/** + * asd_find_ll_by_id - find a linked list entry by its id + * @start: void pointer to the first element in the linked list + * @id0: the first byte of the id (offs 0) + * @id1: the second byte of the id (offs 1) + * + * @start has to be the _base_ element start, since the + * linked list entries's offset is from this pointer. + * Some linked list entries use only the first id, in which case + * you can pass 0xFF for the second. + */ +static void *asd_find_ll_by_id(void * const start, const u8 id0, const u8 id1) +{ + struct asd_ll_el *el = start; + + do { + switch (id1) { + default: + if (el->id1 == id1) + case 0xFF: + if (el->id0 == id0) + return el; + } + el = start + le16_to_cpu(el->next); + } while (el != start); + + return NULL; +} + +/** + * asd_ms_get_phy_params - get phy parameters from the manufacturing sector + * @asd_ha: pointer to the host adapter structure + * @manuf_sec: pointer to the manufacturing sector + * + * The manufacturing sector contans also the linked list of sub-segments, + * since when it was read, its size was taken from the flash directory, + * not from the structure size. + * + * HIDDEN phys do not count in the total count. REPORTED phys cannot + * be enabled but are reported and counted towards the total. + * ENEBLEABLE phys are enabled by default and count towards the total. + * The absolute total phy number is ASD_MAX_PHYS. hw_prof->num_phys + * merely specifies the number of phys the host adapter decided to + * report. E.g., it is possible for phys 0, 1 and 2 to be HIDDEN, + * phys 3, 4 and 5 to be REPORTED and phys 6 and 7 to be ENEBLEABLE. + * In this case ASD_MAX_PHYS is 8, hw_prof->num_phys is 5, and only 2 + * are actually enabled (enabled by default, max number of phys + * enableable in this case). + */ +static int asd_ms_get_phy_params(struct asd_ha_struct *asd_ha, + struct asd_manuf_sec *manuf_sec) +{ + int i; + int en_phys = 0; + int rep_phys = 0; + struct asd_manuf_phy_param *phy_param; + struct asd_manuf_phy_param dflt_phy_param; + + phy_param = asd_find_ll_by_id(manuf_sec, 'P', 'M'); + if (!phy_param) { + ASD_DPRINTK("ms: no phy parameters found\n"); + ASD_DPRINTK("ms: Creating default phy parameters\n"); + dflt_phy_param.sig[0] = 'P'; + dflt_phy_param.sig[1] = 'M'; + dflt_phy_param.maj = 0; + dflt_phy_param.min = 2; + dflt_phy_param.num_phy_desc = 8; + dflt_phy_param.phy_desc_size = sizeof(struct asd_manuf_phy_desc); + for (i =0; i < ASD_MAX_PHYS; i++) { + dflt_phy_param.phy_desc[i].state = 0; + dflt_phy_param.phy_desc[i].phy_id = i; + dflt_phy_param.phy_desc[i].phy_control_0 = 0xf6; + dflt_phy_param.phy_desc[i].phy_control_1 = 0x10; + dflt_phy_param.phy_desc[i].phy_control_2 = 0x43; + dflt_phy_param.phy_desc[i].phy_control_3 = 0xeb; + } + + phy_param = &dflt_phy_param; + + } + + if (phy_param->maj != 0) { + asd_printk("unsupported manuf. phy param major version:0x%x\n", + phy_param->maj); + return -ENOENT; + } + + ASD_DPRINTK("ms: num_phy_desc: %d\n", phy_param->num_phy_desc); + asd_ha->hw_prof.enabled_phys = 0; + for (i = 0; i < phy_param->num_phy_desc; i++) { + struct asd_manuf_phy_desc *pd = &phy_param->phy_desc[i]; + switch (pd->state & 0xF) { + case MS_PHY_STATE_HIDDEN: + ASD_DPRINTK("ms: phy%d: HIDDEN\n", i); + continue; + case MS_PHY_STATE_REPORTED: + ASD_DPRINTK("ms: phy%d: REPORTED\n", i); + asd_ha->hw_prof.enabled_phys &= ~(1 << i); + rep_phys++; + continue; + case MS_PHY_STATE_ENABLEABLE: + ASD_DPRINTK("ms: phy%d: ENEBLEABLE\n", i); + asd_ha->hw_prof.enabled_phys |= (1 << i); + en_phys++; + break; + } + asd_ha->hw_prof.phy_desc[i].phy_control_0 = pd->phy_control_0; + asd_ha->hw_prof.phy_desc[i].phy_control_1 = pd->phy_control_1; + asd_ha->hw_prof.phy_desc[i].phy_control_2 = pd->phy_control_2; + asd_ha->hw_prof.phy_desc[i].phy_control_3 = pd->phy_control_3; + } + asd_ha->hw_prof.max_phys = rep_phys + en_phys; + asd_ha->hw_prof.num_phys = en_phys; + ASD_DPRINTK("ms: max_phys:0x%x, num_phys:0x%x\n", + asd_ha->hw_prof.max_phys, asd_ha->hw_prof.num_phys); + ASD_DPRINTK("ms: enabled_phys:0x%x\n", asd_ha->hw_prof.enabled_phys); + return 0; +} + +static int asd_ms_get_connector_map(struct asd_ha_struct *asd_ha, + struct asd_manuf_sec *manuf_sec) +{ + struct asd_ms_conn_map *cm; + + cm = asd_find_ll_by_id(manuf_sec, 'M', 'C'); + if (!cm) { + ASD_DPRINTK("ms: no connector map found\n"); + return 0; + } + + if (cm->maj != 0) { + ASD_DPRINTK("ms: unsupported: connector map major version 0x%x" + "\n", cm->maj); + return -ENOENT; + } + + /* XXX */ + + return 0; +} + + +/** + * asd_process_ms - find and extract information from the manufacturing sector + * @asd_ha: pointer to the host adapter structure + * @flash_dir: pointer to the flash directory + */ +static int asd_process_ms(struct asd_ha_struct *asd_ha, + struct asd_flash_dir *flash_dir) +{ + int err; + struct asd_manuf_sec *manuf_sec; + u32 offs, size; + + err = asd_find_flash_de(flash_dir, FLASH_DE_MS, &offs, &size); + if (err) { + ASD_DPRINTK("Couldn't find the manuf. sector\n"); + goto out; + } + + if (size == 0) + goto out; + + err = -ENOMEM; + manuf_sec = kmalloc(size, GFP_KERNEL); + if (!manuf_sec) { + ASD_DPRINTK("no mem for manuf sector\n"); + goto out; + } + + err = asd_read_flash_seg(asd_ha, (void *)manuf_sec, offs, size); + if (err) { + ASD_DPRINTK("couldn't read manuf sector at 0x%x, size 0x%x\n", + offs, size); + goto out2; + } + + err = asd_validate_ms(manuf_sec); + if (err) { + ASD_DPRINTK("couldn't validate manuf sector\n"); + goto out2; + } + + err = asd_ms_get_sas_addr(asd_ha, manuf_sec); + if (err) { + ASD_DPRINTK("couldn't read the SAS_ADDR\n"); + goto out2; + } + ASD_DPRINTK("manuf sect SAS_ADDR %llx\n", + SAS_ADDR(asd_ha->hw_prof.sas_addr)); + + err = asd_ms_get_pcba_sn(asd_ha, manuf_sec); + if (err) { + ASD_DPRINTK("couldn't read the PCBA SN\n"); + goto out2; + } + ASD_DPRINTK("manuf sect PCBA SN %s\n", asd_ha->hw_prof.pcba_sn); + + err = asd_ms_get_phy_params(asd_ha, manuf_sec); + if (err) { + ASD_DPRINTK("ms: couldn't get phy parameters\n"); + goto out2; + } + + err = asd_ms_get_connector_map(asd_ha, manuf_sec); + if (err) { + ASD_DPRINTK("ms: couldn't get connector map\n"); + goto out2; + } + +out2: + kfree(manuf_sec); +out: + return err; +} + +static int asd_process_ctrla_phy_settings(struct asd_ha_struct *asd_ha, + struct asd_ctrla_phy_settings *ps) +{ + int i; + for (i = 0; i < ps->num_phys; i++) { + struct asd_ctrla_phy_entry *pe = &ps->phy_ent[i]; + + if (!PHY_ENABLED(asd_ha, i)) + continue; + if (*(u64 *)pe->sas_addr == 0) { + asd_ha->hw_prof.enabled_phys &= ~(1 << i); + continue; + } + /* This is the SAS address which should be sent in IDENTIFY. */ + memcpy(asd_ha->hw_prof.phy_desc[i].sas_addr, pe->sas_addr, + SAS_ADDR_SIZE); + asd_ha->hw_prof.phy_desc[i].max_sas_lrate = + (pe->sas_link_rates & 0xF0) >> 4; + asd_ha->hw_prof.phy_desc[i].min_sas_lrate = + (pe->sas_link_rates & 0x0F); + asd_ha->hw_prof.phy_desc[i].max_sata_lrate = + (pe->sata_link_rates & 0xF0) >> 4; + asd_ha->hw_prof.phy_desc[i].min_sata_lrate = + (pe->sata_link_rates & 0x0F); + asd_ha->hw_prof.phy_desc[i].flags = pe->flags; + ASD_DPRINTK("ctrla: phy%d: sas_addr: %llx, sas rate:0x%x-0x%x," + " sata rate:0x%x-0x%x, flags:0x%x\n", + i, + SAS_ADDR(asd_ha->hw_prof.phy_desc[i].sas_addr), + asd_ha->hw_prof.phy_desc[i].max_sas_lrate, + asd_ha->hw_prof.phy_desc[i].min_sas_lrate, + asd_ha->hw_prof.phy_desc[i].max_sata_lrate, + asd_ha->hw_prof.phy_desc[i].min_sata_lrate, + asd_ha->hw_prof.phy_desc[i].flags); + } + + return 0; +} + +/** + * asd_process_ctrl_a_user - process CTRL-A user settings + * @asd_ha: pointer to the host adapter structure + * @flash_dir: pointer to the flash directory + */ +static int asd_process_ctrl_a_user(struct asd_ha_struct *asd_ha, + struct asd_flash_dir *flash_dir) +{ + int err, i; + u32 offs, size; + struct asd_ll_el *el; + struct asd_ctrla_phy_settings *ps; + struct asd_ctrla_phy_settings dflt_ps; + + err = asd_find_flash_de(flash_dir, FLASH_DE_CTRL_A_USER, &offs, &size); + if (err) { + ASD_DPRINTK("couldn't find CTRL-A user settings section\n"); + ASD_DPRINTK("Creating default CTRL-A user settings section\n"); + + dflt_ps.id0 = 'h'; + dflt_ps.num_phys = 8; + for (i =0; i < ASD_MAX_PHYS; i++) { + memcpy(dflt_ps.phy_ent[i].sas_addr, + asd_ha->hw_prof.sas_addr, SAS_ADDR_SIZE); + dflt_ps.phy_ent[i].sas_link_rates = 0x98; + dflt_ps.phy_ent[i].flags = 0x0; + dflt_ps.phy_ent[i].sata_link_rates = 0x0; + } + + size = sizeof(struct asd_ctrla_phy_settings); + ps = &dflt_ps; + } + + if (size == 0) + goto out; + + err = -ENOMEM; + el = kmalloc(size, GFP_KERNEL); + if (!el) { + ASD_DPRINTK("no mem for ctrla user settings section\n"); + goto out; + } + + err = asd_read_flash_seg(asd_ha, (void *)el, offs, size); + if (err) { + ASD_DPRINTK("couldn't read ctrla phy settings section\n"); + goto out2; + } + + err = -ENOENT; + ps = asd_find_ll_by_id(el, 'h', 0xFF); + if (!ps) { + ASD_DPRINTK("couldn't find ctrla phy settings struct\n"); + goto out2; + } + + err = asd_process_ctrla_phy_settings(asd_ha, ps); + if (err) { + ASD_DPRINTK("couldn't process ctrla phy settings\n"); + goto out2; + } +out2: + kfree(el); +out: + return err; +} + +/** + * asd_read_flash - read flash memory + * @asd_ha: pointer to the host adapter structure + */ +int asd_read_flash(struct asd_ha_struct *asd_ha) +{ + int err; + struct asd_flash_dir *flash_dir; + + err = asd_flash_getid(asd_ha); + if (err) + return err; + + flash_dir = kmalloc(sizeof(*flash_dir), GFP_KERNEL); + if (!flash_dir) + return -ENOMEM; + + err = -ENOENT; + if (!asd_find_flash_dir(asd_ha, flash_dir)) { + ASD_DPRINTK("couldn't find flash directory\n"); + goto out; + } + + if (le32_to_cpu(flash_dir->rev) != 2) { + asd_printk("unsupported flash dir version:0x%x\n", + le32_to_cpu(flash_dir->rev)); + goto out; + } + + err = asd_process_ms(asd_ha, flash_dir); + if (err) { + ASD_DPRINTK("couldn't process manuf sector settings\n"); + goto out; + } + + err = asd_process_ctrl_a_user(asd_ha, flash_dir); + if (err) { + ASD_DPRINTK("couldn't process CTRL-A user settings\n"); + goto out; + } + +out: + kfree(flash_dir); + return err; +} diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c new file mode 100644 index 00000000000..56e4b3ba6a0 --- /dev/null +++ b/drivers/scsi/aic94xx/aic94xx_seq.c @@ -0,0 +1,1404 @@ +/* + * Aic94xx SAS/SATA driver sequencer interface. + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * Parts of this code adapted from David Chaw's adp94xx_seq.c. + * + * This file is licensed under GPLv2. + * + * This file is part of the aic94xx driver. + * + * The aic94xx driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * The aic94xx driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the aic94xx driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/module.h> +#include <linux/firmware.h> +#include "aic94xx_reg.h" +#include "aic94xx_hwi.h" + +#include "aic94xx_seq.h" +#include "aic94xx_dump.h" + +/* It takes no more than 0.05 us for an instruction + * to complete. So waiting for 1 us should be more than + * plenty. + */ +#define PAUSE_DELAY 1 +#define PAUSE_TRIES 1000 + +static const struct firmware *sequencer_fw; +static const char *sequencer_version; +static u16 cseq_vecs[CSEQ_NUM_VECS], lseq_vecs[LSEQ_NUM_VECS], mode2_task, + cseq_idle_loop, lseq_idle_loop; +static u8 *cseq_code, *lseq_code; +static u32 cseq_code_size, lseq_code_size; + +static u16 first_scb_site_no = 0xFFFF; +static u16 last_scb_site_no; + +/* ---------- Pause/Unpause CSEQ/LSEQ ---------- */ + +/** + * asd_pause_cseq - pause the central sequencer + * @asd_ha: pointer to host adapter structure + * + * Return 0 on success, negative on failure. + */ +int asd_pause_cseq(struct asd_ha_struct *asd_ha) +{ + int count = PAUSE_TRIES; + u32 arp2ctl; + + arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL); + if (arp2ctl & PAUSED) + return 0; + + asd_write_reg_dword(asd_ha, CARP2CTL, arp2ctl | EPAUSE); + do { + arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL); + if (arp2ctl & PAUSED) + return 0; + udelay(PAUSE_DELAY); + } while (--count > 0); + + ASD_DPRINTK("couldn't pause CSEQ\n"); + return -1; +} + +/** + * asd_unpause_cseq - unpause the central sequencer. + * @asd_ha: pointer to host adapter structure. + * + * Return 0 on success, negative on error. + */ +int asd_unpause_cseq(struct asd_ha_struct *asd_ha) +{ + u32 arp2ctl; + int count = PAUSE_TRIES; + + arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL); + if (!(arp2ctl & PAUSED)) + return 0; + + asd_write_reg_dword(asd_ha, CARP2CTL, arp2ctl & ~EPAUSE); + do { + arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL); + if (!(arp2ctl & PAUSED)) + return 0; + udelay(PAUSE_DELAY); + } while (--count > 0); + + ASD_DPRINTK("couldn't unpause the CSEQ\n"); + return -1; +} + +/** + * asd_seq_pause_lseq - pause a link sequencer + * @asd_ha: pointer to a host adapter structure + * @lseq: link sequencer of interest + * + * Return 0 on success, negative on error. + */ +static inline int asd_seq_pause_lseq(struct asd_ha_struct *asd_ha, int lseq) +{ + u32 arp2ctl; + int count = PAUSE_TRIES; + + arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq)); + if (arp2ctl & PAUSED) + return 0; + + asd_write_reg_dword(asd_ha, LmARP2CTL(lseq), arp2ctl | EPAUSE); + do { + arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq)); + if (arp2ctl & PAUSED) + return 0; + udelay(PAUSE_DELAY); + } while (--count > 0); + + ASD_DPRINTK("couldn't pause LSEQ %d\n", lseq); + return -1; +} + +/** + * asd_pause_lseq - pause the link sequencer(s) + * @asd_ha: pointer to host adapter structure + * @lseq_mask: mask of link sequencers of interest + * + * Return 0 on success, negative on failure. + */ +int asd_pause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask) +{ + int lseq; + int err = 0; + + for_each_sequencer(lseq_mask, lseq_mask, lseq) { + err = asd_seq_pause_lseq(asd_ha, lseq); + if (err) + return err; + } + + return err; +} + +/** + * asd_seq_unpause_lseq - unpause a link sequencer + * @asd_ha: pointer to host adapter structure + * @lseq: link sequencer of interest + * + * Return 0 on success, negative on error. + */ +static inline int asd_seq_unpause_lseq(struct asd_ha_struct *asd_ha, int lseq) +{ + u32 arp2ctl; + int count = PAUSE_TRIES; + + arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq)); + if (!(arp2ctl & PAUSED)) + return 0; + + asd_write_reg_dword(asd_ha, LmARP2CTL(lseq), arp2ctl & ~EPAUSE); + do { + arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq)); + if (!(arp2ctl & PAUSED)) + return 0; + udelay(PAUSE_DELAY); + } while (--count > 0); + + ASD_DPRINTK("couldn't unpause LSEQ %d\n", lseq); + return 0; +} + + +/** + * asd_unpause_lseq - unpause the link sequencer(s) + * @asd_ha: pointer to host adapter structure + * @lseq_mask: mask of link sequencers of interest + * + * Return 0 on success, negative on failure. + */ +int asd_unpause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask) +{ + int lseq; + int err = 0; + + for_each_sequencer(lseq_mask, lseq_mask, lseq) { + err = asd_seq_unpause_lseq(asd_ha, lseq); + if (err) + return err; + } + + return err; +} + +/* ---------- Downloading CSEQ/LSEQ microcode ---------- */ + +static int asd_verify_cseq(struct asd_ha_struct *asd_ha, const u8 *_prog, + u32 size) +{ + u32 addr = CSEQ_RAM_REG_BASE_ADR; + const u32 *prog = (u32 *) _prog; + u32 i; + + for (i = 0; i < size; i += 4, prog++, addr += 4) { + u32 val = asd_read_reg_dword(asd_ha, addr); + + if (le32_to_cpu(*prog) != val) { + asd_printk("%s: cseq verify failed at %u " + "read:0x%x, wanted:0x%x\n", + pci_name(asd_ha->pcidev), + i, val, le32_to_cpu(*prog)); + return -1; + } + } + ASD_DPRINTK("verified %d bytes, passed\n", size); + return 0; +} + +/** + * asd_verify_lseq - verify the microcode of a link sequencer + * @asd_ha: pointer to host adapter structure + * @_prog: pointer to the microcode + * @size: size of the microcode in bytes + * @lseq: link sequencer of interest + * + * The link sequencer code is accessed in 4 KB pages, which are selected + * by setting LmRAMPAGE (bits 8 and 9) of the LmBISTCTL1 register. + * The 10 KB LSEQm instruction code is mapped, page at a time, at + * LmSEQRAM address. + */ +static int asd_verify_lseq(struct asd_ha_struct *asd_ha, const u8 *_prog, + u32 size, int lseq) +{ +#define LSEQ_CODEPAGE_SIZE 4096 + int pages = (size + LSEQ_CODEPAGE_SIZE - 1) / LSEQ_CODEPAGE_SIZE; + u32 page; + const u32 *prog = (u32 *) _prog; + + for (page = 0; page < pages; page++) { + u32 i; + + asd_write_reg_dword(asd_ha, LmBISTCTL1(lseq), + page << LmRAMPAGE_LSHIFT); + for (i = 0; size > 0 && i < LSEQ_CODEPAGE_SIZE; + i += 4, prog++, size-=4) { + + u32 val = asd_read_reg_dword(asd_ha, LmSEQRAM(lseq)+i); + + if (le32_to_cpu(*prog) != val) { + asd_printk("%s: LSEQ%d verify failed " + "page:%d, offs:%d\n", + pci_name(asd_ha->pcidev), + lseq, page, i); + return -1; + } + } + } + ASD_DPRINTK("LSEQ%d verified %d bytes, passed\n", lseq, + (int)((u8 *)prog-_prog)); + return 0; +} + +/** + * asd_verify_seq -- verify CSEQ/LSEQ microcode + * @asd_ha: pointer to host adapter structure + * @prog: pointer to microcode + * @size: size of the microcode + * @lseq_mask: if 0, verify CSEQ microcode, else mask of LSEQs of interest + * + * Return 0 if microcode is correct, negative on mismatch. + */ +static int asd_verify_seq(struct asd_ha_struct *asd_ha, const u8 *prog, + u32 size, u8 lseq_mask) +{ + if (lseq_mask == 0) + return asd_verify_cseq(asd_ha, prog, size); + else { + int lseq, err; + + for_each_sequencer(lseq_mask, lseq_mask, lseq) { + err = asd_verify_lseq(asd_ha, prog, size, lseq); + if (err) + return err; + } + } + + return 0; +} +#define ASD_DMA_MODE_DOWNLOAD +#ifdef ASD_DMA_MODE_DOWNLOAD +/* This is the size of the CSEQ Mapped instruction page */ +#define MAX_DMA_OVLY_COUNT ((1U << 14)-1) +static int asd_download_seq(struct asd_ha_struct *asd_ha, + const u8 * const prog, u32 size, u8 lseq_mask) +{ + u32 comstaten; + u32 reg; + int page; + const int pages = (size + MAX_DMA_OVLY_COUNT - 1) / MAX_DMA_OVLY_COUNT; + struct asd_dma_tok *token; + int err = 0; + + if (size % 4) { + asd_printk("sequencer program not multiple of 4\n"); + return -1; + } + + asd_pause_cseq(asd_ha); + asd_pause_lseq(asd_ha, 0xFF); + + /* save, disable and clear interrupts */ + comstaten = asd_read_reg_dword(asd_ha, COMSTATEN); + asd_write_reg_dword(asd_ha, COMSTATEN, 0); + asd_write_reg_dword(asd_ha, COMSTAT, COMSTAT_MASK); + + asd_write_reg_dword(asd_ha, CHIMINTEN, RST_CHIMINTEN); + asd_write_reg_dword(asd_ha, CHIMINT, CHIMINT_MASK); + + token = asd_alloc_coherent(asd_ha, MAX_DMA_OVLY_COUNT, GFP_KERNEL); + if (!token) { + asd_printk("out of memory for dma SEQ download\n"); + err = -ENOMEM; + goto out; + } + ASD_DPRINTK("dma-ing %d bytes\n", size); + + for (page = 0; page < pages; page++) { + int i; + u32 left = min(size-page*MAX_DMA_OVLY_COUNT, + (u32)MAX_DMA_OVLY_COUNT); + + memcpy(token->vaddr, prog + page*MAX_DMA_OVLY_COUNT, left); + asd_write_reg_addr(asd_ha, OVLYDMAADR, token->dma_handle); + asd_write_reg_dword(asd_ha, OVLYDMACNT, left); + reg = !page ? RESETOVLYDMA : 0; + reg |= (STARTOVLYDMA | OVLYHALTERR); + reg |= (lseq_mask ? (((u32)lseq_mask) << 8) : OVLYCSEQ); + /* Start DMA. */ + asd_write_reg_dword(asd_ha, OVLYDMACTL, reg); + + for (i = PAUSE_TRIES*100; i > 0; i--) { + u32 dmadone = asd_read_reg_dword(asd_ha, OVLYDMACTL); + if (!(dmadone & OVLYDMAACT)) + break; + udelay(PAUSE_DELAY); + } + } + + reg = asd_read_reg_dword(asd_ha, COMSTAT); + if (!(reg & OVLYDMADONE) || (reg & OVLYERR) + || (asd_read_reg_dword(asd_ha, CHIMINT) & DEVEXCEPT_MASK)){ + asd_printk("%s: error DMA-ing sequencer code\n", + pci_name(asd_ha->pcidev)); + err = -ENODEV; + } + + asd_free_coherent(asd_ha, token); + out: + asd_write_reg_dword(asd_ha, COMSTATEN, comstaten); + + return err ? : asd_verify_seq(asd_ha, prog, size, lseq_mask); +} +#else /* ASD_DMA_MODE_DOWNLOAD */ +static int asd_download_seq(struct asd_ha_struct *asd_ha, const u8 *_prog, + u32 size, u8 lseq_mask) +{ + int i; + u32 reg = 0; + const u32 *prog = (u32 *) _prog; + + if (size % 4) { + asd_printk("sequencer program not multiple of 4\n"); + return -1; + } + + asd_pause_cseq(asd_ha); + asd_pause_lseq(asd_ha, 0xFF); + + reg |= (lseq_mask ? (((u32)lseq_mask) << 8) : OVLYCSEQ); + reg |= PIOCMODE; + + asd_write_reg_dword(asd_ha, OVLYDMACNT, size); + asd_write_reg_dword(asd_ha, OVLYDMACTL, reg); + + ASD_DPRINTK("downloading %s sequencer%s in PIO mode...\n", + lseq_mask ? "LSEQ" : "CSEQ", lseq_mask ? "s" : ""); + + for (i = 0; i < size; i += 4, prog++) + asd_write_reg_dword(asd_ha, SPIODATA, *prog); + + reg = (reg & ~PIOCMODE) | OVLYHALTERR; + asd_write_reg_dword(asd_ha, OVLYDMACTL, reg); + + return asd_verify_seq(asd_ha, _prog, size, lseq_mask); +} +#endif /* ASD_DMA_MODE_DOWNLOAD */ + +/** + * asd_seq_download_seqs - download the sequencer microcode + * @asd_ha: pointer to host adapter structure + * + * Download the central and link sequencer microcode. + */ +static int asd_seq_download_seqs(struct asd_ha_struct *asd_ha) +{ + int err; + + if (!asd_ha->hw_prof.enabled_phys) { + asd_printk("%s: no enabled phys!\n", pci_name(asd_ha->pcidev)); + return -ENODEV; + } + + /* Download the CSEQ */ + ASD_DPRINTK("downloading CSEQ...\n"); + err = asd_download_seq(asd_ha, cseq_code, cseq_code_size, 0); + if (err) { + asd_printk("CSEQ download failed:%d\n", err); + return err; + } + + /* Download the Link Sequencers code. All of the Link Sequencers + * microcode can be downloaded at the same time. + */ + ASD_DPRINTK("downloading LSEQs...\n"); + err = asd_download_seq(asd_ha, lseq_code, lseq_code_size, + asd_ha->hw_prof.enabled_phys); + if (err) { + /* Try it one at a time */ + u8 lseq; + u8 lseq_mask = asd_ha->hw_prof.enabled_phys; + + for_each_sequencer(lseq_mask, lseq_mask, lseq) { + err = asd_download_seq(asd_ha, lseq_code, + lseq_code_size, 1<<lseq); + if (err) + break; + } + } + if (err) + asd_printk("LSEQs download failed:%d\n", err); + + return err; +} + +/* ---------- Initializing the chip, chip memory, etc. ---------- */ + +/** + * asd_init_cseq_mip - initialize CSEQ mode independent pages 4-7 + * @asd_ha: pointer to host adapter structure + */ +static void asd_init_cseq_mip(struct asd_ha_struct *asd_ha) +{ + /* CSEQ Mode Independent, page 4 setup. */ + asd_write_reg_word(asd_ha, CSEQ_Q_EXE_HEAD, 0xFFFF); + asd_write_reg_word(asd_ha, CSEQ_Q_EXE_TAIL, 0xFFFF); + asd_write_reg_word(asd_ha, CSEQ_Q_DONE_HEAD, 0xFFFF); + asd_write_reg_word(asd_ha, CSEQ_Q_DONE_TAIL, 0xFFFF); + asd_write_reg_word(asd_ha, CSEQ_Q_SEND_HEAD, 0xFFFF); + asd_write_reg_word(asd_ha, CSEQ_Q_SEND_TAIL, 0xFFFF); + asd_write_reg_word(asd_ha, CSEQ_Q_DMA2CHIM_HEAD, 0xFFFF); + asd_write_reg_word(asd_ha, CSEQ_Q_DMA2CHIM_TAIL, 0xFFFF); + asd_write_reg_word(asd_ha, CSEQ_Q_COPY_HEAD, 0xFFFF); + asd_write_reg_word(asd_ha, CSEQ_Q_COPY_TAIL, 0xFFFF); + asd_write_reg_word(asd_ha, CSEQ_REG0, 0); + asd_write_reg_word(asd_ha, CSEQ_REG1, 0); + asd_write_reg_dword(asd_ha, CSEQ_REG2, 0); + asd_write_reg_byte(asd_ha, CSEQ_LINK_CTL_Q_MAP, 0); + { + u8 con = asd_read_reg_byte(asd_ha, CCONEXIST); + u8 val = hweight8(con); + asd_write_reg_byte(asd_ha, CSEQ_MAX_CSEQ_MODE, (val<<4)|val); + } + asd_write_reg_word(asd_ha, CSEQ_FREE_LIST_HACK_COUNT, 0); + + /* CSEQ Mode independent, page 5 setup. */ + asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_QUEUE, 0); + asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_QUEUE+4, 0); + asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_COUNT, 0); + asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_COUNT+4, 0); + asd_write_reg_word(asd_ha, CSEQ_Q_EST_NEXUS_HEAD, 0xFFFF); + asd_write_reg_word(asd_ha, CSEQ_Q_EST_NEXUS_TAIL, 0xFFFF); + asd_write_reg_word(asd_ha, CSEQ_NEED_EST_NEXUS_SCB, 0); + asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_REQ_HEAD, 0); + asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_REQ_TAIL, 0); + asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_SCB_OFFSET, 0); + + /* CSEQ Mode independent, page 6 setup. */ + asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_RET_ADDR0, 0); + asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_RET_ADDR1, 0); + asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_SCBPTR, 0); + asd_write_reg_byte(asd_ha, CSEQ_INT_ROUT_MODE, 0); + asd_write_reg_byte(asd_ha, CSEQ_ISR_SCRATCH_FLAGS, 0); + asd_write_reg_word(asd_ha, CSEQ_ISR_SAVE_SINDEX, 0); + asd_write_reg_word(asd_ha, CSEQ_ISR_SAVE_DINDEX, 0); + asd_write_reg_word(asd_ha, CSEQ_Q_MONIRTT_HEAD, 0xFFFF); + asd_write_reg_word(asd_ha, CSEQ_Q_MONIRTT_TAIL, 0xFFFF); + /* Calculate the free scb mask. */ + { + u16 cmdctx = asd_get_cmdctx_size(asd_ha); + cmdctx = (~((cmdctx/128)-1)) >> 8; + asd_write_reg_byte(asd_ha, CSEQ_FREE_SCB_MASK, (u8)cmdctx); + } + asd_write_reg_word(asd_ha, CSEQ_BUILTIN_FREE_SCB_HEAD, + first_scb_site_no); + asd_write_reg_word(asd_ha, CSEQ_BUILTIN_FREE_SCB_TAIL, + last_scb_site_no); + asd_write_reg_word(asd_ha, CSEQ_EXTENDED_FREE_SCB_HEAD, 0xFFFF); + asd_write_reg_word(asd_ha, CSEQ_EXTENDED_FREE_SCB_TAIL, 0xFFFF); + + /* CSEQ Mode independent, page 7 setup. */ + asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_QUEUE, 0); + asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_QUEUE+4, 0); + asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_COUNT, 0); + asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_COUNT+4, 0); + asd_write_reg_word(asd_ha, CSEQ_Q_EMPTY_HEAD, 0xFFFF); + asd_write_reg_word(asd_ha, CSEQ_Q_EMPTY_TAIL, 0xFFFF); + asd_write_reg_word(asd_ha, CSEQ_NEED_EMPTY_SCB, 0); + asd_write_reg_byte(asd_ha, CSEQ_EMPTY_REQ_HEAD, 0); + asd_write_reg_byte(asd_ha, CSEQ_EMPTY_REQ_TAIL, 0); + asd_write_reg_byte(asd_ha, CSEQ_EMPTY_SCB_OFFSET, 0); + asd_write_reg_word(asd_ha, CSEQ_PRIMITIVE_DATA, 0); + asd_write_reg_dword(asd_ha, CSEQ_TIMEOUT_CONST, 0); +} + +/** + * asd_init_cseq_mdp - initialize CSEQ Mode dependent pages + * @asd_ha: pointer to host adapter structure + */ +static void asd_init_cseq_mdp(struct asd_ha_struct *asd_ha) +{ + int i; + int moffs; + + moffs = CSEQ_PAGE_SIZE * 2; + + /* CSEQ Mode dependent, modes 0-7, page 0 setup. */ + for (i = 0; i < 8; i++) { + asd_write_reg_word(asd_ha, i*moffs+CSEQ_LRM_SAVE_SINDEX, 0); + asd_write_reg_word(asd_ha, i*moffs+CSEQ_LRM_SAVE_SCBPTR, 0); + asd_write_reg_word(asd_ha, i*moffs+CSEQ_Q_LINK_HEAD, 0xFFFF); + asd_write_reg_word(asd_ha, i*moffs+CSEQ_Q_LINK_TAIL, 0xFFFF); + asd_write_reg_byte(asd_ha, i*moffs+CSEQ_LRM_SAVE_SCRPAGE, 0); + } + + /* CSEQ Mode dependent, mode 0-7, page 1 and 2 shall be ignored. */ + + /* CSEQ Mode dependent, mode 8, page 0 setup. */ + asd_write_reg_word(asd_ha, CSEQ_RET_ADDR, 0xFFFF); + asd_write_reg_word(asd_ha, CSEQ_RET_SCBPTR, 0); + asd_write_reg_word(asd_ha, CSEQ_SAVE_SCBPTR, 0); + asd_write_reg_word(asd_ha, CSEQ_EMPTY_TRANS_CTX, 0); + asd_write_reg_word(asd_ha, CSEQ_RESP_LEN, 0); + asd_write_reg_word(asd_ha, CSEQ_TMF_SCBPTR, 0); + asd_write_reg_word(asd_ha, CSEQ_GLOBAL_PREV_SCB, 0); + asd_write_reg_word(asd_ha, CSEQ_GLOBAL_HEAD, 0); + asd_write_reg_word(asd_ha, CSEQ_CLEAR_LU_HEAD, 0); + asd_write_reg_byte(asd_ha, CSEQ_TMF_OPCODE, 0); + asd_write_reg_byte(asd_ha, CSEQ_SCRATCH_FLAGS, 0); + asd_write_reg_word(asd_ha, CSEQ_HSB_SITE, 0); + asd_write_reg_word(asd_ha, CSEQ_FIRST_INV_SCB_SITE, + (u16)last_scb_site_no+1); + asd_write_reg_word(asd_ha, CSEQ_FIRST_INV_DDB_SITE, + (u16)asd_ha->hw_prof.max_ddbs); + + /* CSEQ Mode dependent, mode 8, page 1 setup. */ + asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CLEAR, 0); + asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CLEAR + 4, 0); + asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CHECK, 0); + asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CHECK + 4, 0); + + /* CSEQ Mode dependent, mode 8, page 2 setup. */ + /* Tell the sequencer the bus address of the first SCB. */ + asd_write_reg_addr(asd_ha, CSEQ_HQ_NEW_POINTER, + asd_ha->seq.next_scb.dma_handle); + ASD_DPRINTK("First SCB dma_handle: 0x%llx\n", + (unsigned long long)asd_ha->seq.next_scb.dma_handle); + + /* Tell the sequencer the first Done List entry address. */ + asd_write_reg_addr(asd_ha, CSEQ_HQ_DONE_BASE, + asd_ha->seq.actual_dl->dma_handle); + + /* Initialize the Q_DONE_POINTER with the least significant + * 4 bytes of the first Done List address. */ + asd_write_reg_dword(asd_ha, CSEQ_HQ_DONE_POINTER, + ASD_BUSADDR_LO(asd_ha->seq.actual_dl->dma_handle)); + + asd_write_reg_byte(asd_ha, CSEQ_HQ_DONE_PASS, ASD_DEF_DL_TOGGLE); + + /* CSEQ Mode dependent, mode 8, page 3 shall be ignored. */ +} + +/** + * asd_init_cseq_scratch -- setup and init CSEQ + * @asd_ha: pointer to host adapter structure + * + * Setup and initialize Central sequencers. Initialiaze the mode + * independent and dependent scratch page to the default settings. + */ +static void asd_init_cseq_scratch(struct asd_ha_struct *asd_ha) +{ + asd_init_cseq_mip(asd_ha); + asd_init_cseq_mdp(asd_ha); +} + +/** + * asd_init_lseq_mip -- initialize LSEQ Mode independent pages 0-3 + * @asd_ha: pointer to host adapter structure + */ +static void asd_init_lseq_mip(struct asd_ha_struct *asd_ha, u8 lseq) +{ + int i; + + /* LSEQ Mode independent page 0 setup. */ + asd_write_reg_word(asd_ha, LmSEQ_Q_TGTXFR_HEAD(lseq), 0xFFFF); + asd_write_reg_word(asd_ha, LmSEQ_Q_TGTXFR_TAIL(lseq), 0xFFFF); + asd_write_reg_byte(asd_ha, LmSEQ_LINK_NUMBER(lseq), lseq); + asd_write_reg_byte(asd_ha, LmSEQ_SCRATCH_FLAGS(lseq), + ASD_NOTIFY_ENABLE_SPINUP); + asd_write_reg_dword(asd_ha, LmSEQ_CONNECTION_STATE(lseq),0x08000000); + asd_write_reg_word(asd_ha, LmSEQ_CONCTL(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_CONSTAT(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_CONNECTION_MODES(lseq), 0); + asd_write_reg_word(asd_ha, LmSEQ_REG1_ISR(lseq), 0); + asd_write_reg_word(asd_ha, LmSEQ_REG2_ISR(lseq), 0); + asd_write_reg_word(asd_ha, LmSEQ_REG3_ISR(lseq), 0); + asd_write_reg_dword(asd_ha, LmSEQ_REG0_ISR(lseq), 0); + asd_write_reg_dword(asd_ha, LmSEQ_REG0_ISR(lseq)+4, 0); + + /* LSEQ Mode independent page 1 setup. */ + asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR0(lseq), 0xFFFF); + asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR1(lseq), 0xFFFF); + asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR2(lseq), 0xFFFF); + asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR3(lseq), 0xFFFF); + asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE0(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE1(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE2(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE3(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_HEAD(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_TAIL(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_BUF_AVAIL(lseq), 0); + asd_write_reg_dword(asd_ha, LmSEQ_TIMEOUT_CONST(lseq), 0); + asd_write_reg_word(asd_ha, LmSEQ_ISR_SAVE_SINDEX(lseq), 0); + asd_write_reg_word(asd_ha, LmSEQ_ISR_SAVE_DINDEX(lseq), 0); + + /* LSEQ Mode Independent page 2 setup. */ + asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR0(lseq), 0xFFFF); + asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR1(lseq), 0xFFFF); + asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR2(lseq), 0xFFFF); + asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR3(lseq), 0xFFFF); + asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD0(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD1(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD2(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD3(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_HEAD(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_TAIL(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_BUFS_AVAIL(lseq), 0); + for (i = 0; i < 12; i += 4) + asd_write_reg_dword(asd_ha, LmSEQ_ATA_SCR_REGS(lseq) + i, 0); + + /* LSEQ Mode Independent page 3 setup. */ + + /* Device present timer timeout */ + asd_write_reg_dword(asd_ha, LmSEQ_DEV_PRES_TMR_TOUT_CONST(lseq), + ASD_DEV_PRESENT_TIMEOUT); + + /* SATA interlock timer disabled */ + asd_write_reg_dword(asd_ha, LmSEQ_SATA_INTERLOCK_TIMEOUT(lseq), + ASD_SATA_INTERLOCK_TIMEOUT); + + /* STP shutdown timer timeout constant, IGNORED by the sequencer, + * always 0. */ + asd_write_reg_dword(asd_ha, LmSEQ_STP_SHUTDOWN_TIMEOUT(lseq), + ASD_STP_SHUTDOWN_TIMEOUT); + + asd_write_reg_dword(asd_ha, LmSEQ_SRST_ASSERT_TIMEOUT(lseq), + ASD_SRST_ASSERT_TIMEOUT); + + asd_write_reg_dword(asd_ha, LmSEQ_RCV_FIS_TIMEOUT(lseq), + ASD_RCV_FIS_TIMEOUT); + + asd_write_reg_dword(asd_ha, LmSEQ_ONE_MILLISEC_TIMEOUT(lseq), + ASD_ONE_MILLISEC_TIMEOUT); + + /* COM_INIT timer */ + asd_write_reg_dword(asd_ha, LmSEQ_TEN_MS_COMINIT_TIMEOUT(lseq), + ASD_TEN_MILLISEC_TIMEOUT); + + asd_write_reg_dword(asd_ha, LmSEQ_SMP_RCV_TIMEOUT(lseq), + ASD_SMP_RCV_TIMEOUT); +} + +/** + * asd_init_lseq_mdp -- initialize LSEQ mode dependent pages. + * @asd_ha: pointer to host adapter structure + */ +static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha, int lseq) +{ + int i; + u32 moffs; + u16 ret_addr[] = { + 0xFFFF, /* mode 0 */ + 0xFFFF, /* mode 1 */ + mode2_task, /* mode 2 */ + 0, + 0xFFFF, /* mode 4/5 */ + 0xFFFF, /* mode 4/5 */ + }; + + /* + * Mode 0,1,2 and 4/5 have common field on page 0 for the first + * 14 bytes. + */ + for (i = 0; i < 3; i++) { + moffs = i * LSEQ_MODE_SCRATCH_SIZE; + asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR(lseq)+moffs, + ret_addr[i]); + asd_write_reg_word(asd_ha, LmSEQ_REG0_MODE(lseq)+moffs, 0); + asd_write_reg_word(asd_ha, LmSEQ_MODE_FLAGS(lseq)+moffs, 0); + asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR2(lseq)+moffs,0xFFFF); + asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR1(lseq)+moffs,0xFFFF); + asd_write_reg_byte(asd_ha, LmSEQ_OPCODE_TO_CSEQ(lseq)+moffs,0); + asd_write_reg_word(asd_ha, LmSEQ_DATA_TO_CSEQ(lseq)+moffs,0); + } + /* + * Mode 5 page 0 overlaps the same scratch page with Mode 0 page 3. + */ + asd_write_reg_word(asd_ha, + LmSEQ_RET_ADDR(lseq)+LSEQ_MODE5_PAGE0_OFFSET, + ret_addr[5]); + asd_write_reg_word(asd_ha, + LmSEQ_REG0_MODE(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0); + asd_write_reg_word(asd_ha, + LmSEQ_MODE_FLAGS(lseq)+LSEQ_MODE5_PAGE0_OFFSET, 0); + asd_write_reg_word(asd_ha, + LmSEQ_RET_ADDR2(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0xFFFF); + asd_write_reg_word(asd_ha, + LmSEQ_RET_ADDR1(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0xFFFF); + asd_write_reg_byte(asd_ha, + LmSEQ_OPCODE_TO_CSEQ(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0); + asd_write_reg_word(asd_ha, + LmSEQ_DATA_TO_CSEQ(lseq)+LSEQ_MODE5_PAGE0_OFFSET, 0); + + /* LSEQ Mode dependent 0, page 0 setup. */ + asd_write_reg_word(asd_ha, LmSEQ_FIRST_INV_DDB_SITE(lseq), + (u16)asd_ha->hw_prof.max_ddbs); + asd_write_reg_word(asd_ha, LmSEQ_EMPTY_TRANS_CTX(lseq), 0); + asd_write_reg_word(asd_ha, LmSEQ_RESP_LEN(lseq), 0); + asd_write_reg_word(asd_ha, LmSEQ_FIRST_INV_SCB_SITE(lseq), + (u16)last_scb_site_no+1); + asd_write_reg_word(asd_ha, LmSEQ_INTEN_SAVE(lseq), + (u16) ((LmM0INTEN_MASK & 0xFFFF0000) >> 16)); + asd_write_reg_word(asd_ha, LmSEQ_INTEN_SAVE(lseq) + 2, + (u16) LmM0INTEN_MASK & 0xFFFF); + asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_FRM_LEN(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_PROTOCOL(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_RESP_STATUS(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_LAST_LOADED_SGE(lseq), 0); + asd_write_reg_word(asd_ha, LmSEQ_SAVE_SCBPTR(lseq), 0); + + /* LSEQ mode dependent, mode 1, page 0 setup. */ + asd_write_reg_word(asd_ha, LmSEQ_Q_XMIT_HEAD(lseq), 0xFFFF); + asd_write_reg_word(asd_ha, LmSEQ_M1_EMPTY_TRANS_CTX(lseq), 0); + asd_write_reg_word(asd_ha, LmSEQ_INI_CONN_TAG(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_FAILED_OPEN_STATUS(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_XMIT_REQUEST_TYPE(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_M1_RESP_STATUS(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_M1_LAST_LOADED_SGE(lseq), 0); + asd_write_reg_word(asd_ha, LmSEQ_M1_SAVE_SCBPTR(lseq), 0); + + /* LSEQ Mode dependent mode 2, page 0 setup */ + asd_write_reg_word(asd_ha, LmSEQ_PORT_COUNTER(lseq), 0); + asd_write_reg_word(asd_ha, LmSEQ_PM_TABLE_PTR(lseq), 0); + asd_write_reg_word(asd_ha, LmSEQ_SATA_INTERLOCK_TMR_SAVE(lseq), 0); + asd_write_reg_word(asd_ha, LmSEQ_IP_BITL(lseq), 0); + asd_write_reg_word(asd_ha, LmSEQ_COPY_SMP_CONN_TAG(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_P0M2_OFFS1AH(lseq), 0); + + /* LSEQ Mode dependent, mode 4/5, page 0 setup. */ + asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_STATUS(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_MODE(lseq), 0); + asd_write_reg_word(asd_ha, LmSEQ_Q_LINK_HEAD(lseq), 0xFFFF); + asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_ERR(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_SIGNALS(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_SAS_RESET_MODE(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_LINK_RESET_RETRY_COUNT(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_NUM_LINK_RESET_RETRIES(lseq), 0); + asd_write_reg_word(asd_ha, LmSEQ_OOB_INT_ENABLES(lseq), 0); + /* + * Set the desired interval between transmissions of the NOTIFY + * (ENABLE SPINUP) primitive. Must be initilized to val - 1. + */ + asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_TIMEOUT(lseq), + ASD_NOTIFY_TIMEOUT - 1); + /* No delay for the first NOTIFY to be sent to the attached target. */ + asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_DOWN_COUNT(lseq), + ASD_NOTIFY_DOWN_COUNT); + + /* LSEQ Mode dependent, mode 0 and 1, page 1 setup. */ + for (i = 0; i < 2; i++) { + int j; + /* Start from Page 1 of Mode 0 and 1. */ + moffs = LSEQ_PAGE_SIZE + i*LSEQ_MODE_SCRATCH_SIZE; + /* All the fields of page 1 can be intialized to 0. */ + for (j = 0; j < LSEQ_PAGE_SIZE; j += 4) + asd_write_reg_dword(asd_ha, LmSCRATCH(lseq)+moffs+j,0); + } + + /* LSEQ Mode dependent, mode 2, page 1 setup. */ + asd_write_reg_dword(asd_ha, LmSEQ_INVALID_DWORD_COUNT(lseq), 0); + asd_write_reg_dword(asd_ha, LmSEQ_DISPARITY_ERROR_COUNT(lseq), 0); + asd_write_reg_dword(asd_ha, LmSEQ_LOSS_OF_SYNC_COUNT(lseq), 0); + + /* LSEQ Mode dependent, mode 4/5, page 1. */ + for (i = 0; i < LSEQ_PAGE_SIZE; i+=4) + asd_write_reg_dword(asd_ha, LmSEQ_FRAME_TYPE_MASK(lseq)+i, 0); + asd_write_reg_byte(asd_ha, LmSEQ_FRAME_TYPE_MASK(lseq), 0xFF); + asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq), 0xFF); + asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq)+1,0xFF); + asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq)+2,0xFF); + asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq), 0xFF); + asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq)+1, 0xFF); + asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq)+2, 0xFF); + asd_write_reg_dword(asd_ha, LmSEQ_DATA_OFFSET(lseq), 0xFFFFFFFF); + + /* LSEQ Mode dependent, mode 0, page 2 setup. */ + asd_write_reg_dword(asd_ha, LmSEQ_SMP_RCV_TIMER_TERM_TS(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_DEVICE_BITS(lseq), 0); + asd_write_reg_word(asd_ha, LmSEQ_SDB_DDB(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_SDB_NUM_TAGS(lseq), 0); + asd_write_reg_byte(asd_ha, LmSEQ_SDB_CURR_TAG(lseq), 0); + + /* LSEQ Mode Dependent 1, page 2 setup. */ + asd_write_reg_dword(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(lseq), 0); + asd_write_reg_dword(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(lseq)+4, 0); + asd_write_reg_dword(asd_ha, LmSEQ_OPEN_TIMER_TERM_TS(lseq), 0); + asd_write_reg_dword(asd_ha, LmSEQ_SRST_AS_TIMER_TERM_TS(lseq), 0); + asd_write_reg_dword(asd_ha, LmSEQ_LAST_LOADED_SG_EL(lseq), 0); + + /* LSEQ Mode Dependent 2, page 2 setup. */ + /* The LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS is IGNORED by the sequencer, + * i.e. always 0. */ + asd_write_reg_dword(asd_ha, LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS(lseq),0); + asd_write_reg_dword(asd_ha, LmSEQ_CLOSE_TIMER_TERM_TS(lseq), 0); + asd_write_reg_dword(asd_ha, LmSEQ_BREAK_TIMER_TERM_TS(lseq), 0); + asd_write_reg_dword(asd_ha, LmSEQ_DWS_RESET_TIMER_TERM_TS(lseq), 0); + asd_write_reg_dword(asd_ha,LmSEQ_SATA_INTERLOCK_TIMER_TERM_TS(lseq),0); + asd_write_reg_dword(asd_ha, LmSEQ_MCTL_TIMER_TERM_TS(lseq), 0); + + /* LSEQ Mode Dependent 4/5, page 2 setup. */ + asd_write_reg_dword(asd_ha, LmSEQ_COMINIT_TIMER_TERM_TS(lseq), 0); + asd_write_reg_dword(asd_ha, LmSEQ_RCV_ID_TIMER_TERM_TS(lseq), 0); + asd_write_reg_dword(asd_ha, LmSEQ_RCV_FIS_TIMER_TERM_TS(lseq), 0); + asd_write_reg_dword(asd_ha, LmSEQ_DEV_PRES_TIMER_TERM_TS(lseq), 0); +} + +/** + * asd_init_lseq_scratch -- setup and init link sequencers + * @asd_ha: pointer to host adapter struct + */ +static void asd_init_lseq_scratch(struct asd_ha_struct *asd_ha) +{ + u8 lseq; + u8 lseq_mask; + + lseq_mask = asd_ha->hw_prof.enabled_phys; + for_each_sequencer(lseq_mask, lseq_mask, lseq) { + asd_init_lseq_mip(asd_ha, lseq); + asd_init_lseq_mdp(asd_ha, lseq); + } +} + +/** + * asd_init_scb_sites -- initialize sequencer SCB sites (memory). + * @asd_ha: pointer to host adapter structure + * + * This should be done before initializing common CSEQ and LSEQ + * scratch since those areas depend on some computed values here, + * last_scb_site_no, etc. + */ +static void asd_init_scb_sites(struct asd_ha_struct *asd_ha) +{ + u16 site_no; + u16 max_scbs = 0; + + for (site_no = asd_ha->hw_prof.max_scbs-1; + site_no != (u16) -1; + site_no--) { + u16 i; + + /* Initialize all fields in the SCB site to 0. */ + for (i = 0; i < ASD_SCB_SIZE; i += 4) + asd_scbsite_write_dword(asd_ha, site_no, i, 0); + + /* Workaround needed by SEQ to fix a SATA issue is to exclude + * certain SCB sites from the free list. */ + if (!SCB_SITE_VALID(site_no)) + continue; + + if (last_scb_site_no == 0) + last_scb_site_no = site_no; + + /* For every SCB site, we need to initialize the + * following fields: Q_NEXT, SCB_OPCODE, SCB_FLAGS, + * and SG Element Flag. */ + + /* Q_NEXT field of the last SCB is invalidated. */ + asd_scbsite_write_word(asd_ha, site_no, 0, first_scb_site_no); + + /* Initialize SCB Site Opcode field to invalid. */ + asd_scbsite_write_byte(asd_ha, site_no, + offsetof(struct scb_header, opcode), + 0xFF); + + /* Initialize SCB Site Flags field to mean a response + * frame has been received. This means inadvertent + * frames received to be dropped. */ + asd_scbsite_write_byte(asd_ha, site_no, 0x49, 0x01); + + first_scb_site_no = site_no; + max_scbs++; + } + asd_ha->hw_prof.max_scbs = max_scbs; + ASD_DPRINTK("max_scbs:%d\n", asd_ha->hw_prof.max_scbs); + ASD_DPRINTK("first_scb_site_no:0x%x\n", first_scb_site_no); + ASD_DPRINTK("last_scb_site_no:0x%x\n", last_scb_site_no); +} + +/** + * asd_init_cseq_cio - initialize CSEQ CIO registers + * @asd_ha: pointer to host adapter structure + */ +static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha) +{ + int i; + + asd_write_reg_byte(asd_ha, CSEQCOMINTEN, 0); + asd_write_reg_byte(asd_ha, CSEQDLCTL, ASD_DL_SIZE_BITS); + asd_write_reg_byte(asd_ha, CSEQDLOFFS, 0); + asd_write_reg_byte(asd_ha, CSEQDLOFFS+1, 0); + asd_ha->seq.scbpro = 0; + asd_write_reg_dword(asd_ha, SCBPRO, 0); + asd_write_reg_dword(asd_ha, CSEQCON, 0); + + /* Intialize CSEQ Mode 11 Interrupt Vectors. + * The addresses are 16 bit wide and in dword units. + * The values of their macros are in byte units. + * Thus we have to divide by 4. */ + asd_write_reg_word(asd_ha, CM11INTVEC0, cseq_vecs[0]); + asd_write_reg_word(asd_ha, CM11INTVEC1, cseq_vecs[1]); + asd_write_reg_word(asd_ha, CM11INTVEC2, cseq_vecs[2]); + + /* Enable ARP2HALTC (ARP2 Halted from Halt Code Write). */ + asd_write_reg_byte(asd_ha, CARP2INTEN, EN_ARP2HALTC); + + /* Initialize CSEQ Scratch Page to 0x04. */ + asd_write_reg_byte(asd_ha, CSCRATCHPAGE, 0x04); + + /* Initialize CSEQ Mode[0-8] Dependent registers. */ + /* Initialize Scratch Page to 0. */ + for (i = 0; i < 9; i++) + asd_write_reg_byte(asd_ha, CMnSCRATCHPAGE(i), 0); + + /* Reset the ARP2 Program Count. */ + asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop); + + for (i = 0; i < 8; i++) { + /* Intialize Mode n Link m Interrupt Enable. */ + asd_write_reg_dword(asd_ha, CMnINTEN(i), EN_CMnRSPMBXF); + /* Initialize Mode n Request Mailbox. */ + asd_write_reg_dword(asd_ha, CMnREQMBX(i), 0); + } +} + +/** + * asd_init_lseq_cio -- initialize LmSEQ CIO registers + * @asd_ha: pointer to host adapter structure + */ +static void asd_init_lseq_cio(struct asd_ha_struct *asd_ha, int lseq) +{ + u8 *sas_addr; + int i; + + /* Enable ARP2HALTC (ARP2 Halted from Halt Code Write). */ + asd_write_reg_dword(asd_ha, LmARP2INTEN(lseq), EN_ARP2HALTC); + + asd_write_reg_byte(asd_ha, LmSCRATCHPAGE(lseq), 0); + + /* Initialize Mode 0,1, and 2 SCRATCHPAGE to 0. */ + for (i = 0; i < 3; i++) + asd_write_reg_byte(asd_ha, LmMnSCRATCHPAGE(lseq, i), 0); + + /* Initialize Mode 5 SCRATCHPAGE to 0. */ + asd_write_reg_byte(asd_ha, LmMnSCRATCHPAGE(lseq, 5), 0); + + asd_write_reg_dword(asd_ha, LmRSPMBX(lseq), 0); + /* Initialize Mode 0,1,2 and 5 Interrupt Enable and + * Interrupt registers. */ + asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 0), LmM0INTEN_MASK); + asd_write_reg_dword(asd_ha, LmMnINT(lseq, 0), 0xFFFFFFFF); + /* Mode 1 */ + asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 1), LmM1INTEN_MASK); + asd_write_reg_dword(asd_ha, LmMnINT(lseq, 1), 0xFFFFFFFF); + /* Mode 2 */ + asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 2), LmM2INTEN_MASK); + asd_write_reg_dword(asd_ha, LmMnINT(lseq, 2), 0xFFFFFFFF); + /* Mode 5 */ + asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 5), LmM5INTEN_MASK); + asd_write_reg_dword(asd_ha, LmMnINT(lseq, 5), 0xFFFFFFFF); + + /* Enable HW Timer status. */ + asd_write_reg_byte(asd_ha, LmHWTSTATEN(lseq), LmHWTSTATEN_MASK); + + /* Enable Primitive Status 0 and 1. */ + asd_write_reg_dword(asd_ha, LmPRIMSTAT0EN(lseq), LmPRIMSTAT0EN_MASK); + asd_write_reg_dword(asd_ha, LmPRIMSTAT1EN(lseq), LmPRIMSTAT1EN_MASK); + + /* Enable Frame Error. */ + asd_write_reg_dword(asd_ha, LmFRMERREN(lseq), LmFRMERREN_MASK); + asd_write_reg_byte(asd_ha, LmMnHOLDLVL(lseq, 0), 0x50); + + /* Initialize Mode 0 Transfer Level to 512. */ + asd_write_reg_byte(asd_ha, LmMnXFRLVL(lseq, 0), LmMnXFRLVL_512); + /* Initialize Mode 1 Transfer Level to 256. */ + asd_write_reg_byte(asd_ha, LmMnXFRLVL(lseq, 1), LmMnXFRLVL_256); + + /* Initialize Program Count. */ + asd_write_reg_word(asd_ha, LmPRGMCNT(lseq), lseq_idle_loop); + + /* Enable Blind SG Move. */ + asd_write_reg_dword(asd_ha, LmMODECTL(lseq), LmBLIND48); + asd_write_reg_word(asd_ha, LmM3SATATIMER(lseq), + ASD_SATA_INTERLOCK_TIMEOUT); + + (void) asd_read_reg_dword(asd_ha, LmREQMBX(lseq)); + + /* Clear Primitive Status 0 and 1. */ + asd_write_reg_dword(asd_ha, LmPRMSTAT0(lseq), 0xFFFFFFFF); + asd_write_reg_dword(asd_ha, LmPRMSTAT1(lseq), 0xFFFFFFFF); + + /* Clear HW Timer status. */ + asd_write_reg_byte(asd_ha, LmHWTSTAT(lseq), 0xFF); + + /* Clear DMA Errors for Mode 0 and 1. */ + asd_write_reg_byte(asd_ha, LmMnDMAERRS(lseq, 0), 0xFF); + asd_write_reg_byte(asd_ha, LmMnDMAERRS(lseq, 1), 0xFF); + + /* Clear SG DMA Errors for Mode 0 and 1. */ + asd_write_reg_byte(asd_ha, LmMnSGDMAERRS(lseq, 0), 0xFF); + asd_write_reg_byte(asd_ha, LmMnSGDMAERRS(lseq, 1), 0xFF); + + /* Clear Mode 0 Buffer Parity Error. */ + asd_write_reg_byte(asd_ha, LmMnBUFSTAT(lseq, 0), LmMnBUFPERR); + + /* Clear Mode 0 Frame Error register. */ + asd_write_reg_dword(asd_ha, LmMnFRMERR(lseq, 0), 0xFFFFFFFF); + + /* Reset LSEQ external interrupt arbiter. */ + asd_write_reg_byte(asd_ha, LmARP2INTCTL(lseq), RSTINTCTL); + + /* Set the Phy SAS for the LmSEQ WWN. */ + sas_addr = asd_ha->phys[lseq].phy_desc->sas_addr; + for (i = 0; i < SAS_ADDR_SIZE; i++) + asd_write_reg_byte(asd_ha, LmWWN(lseq) + i, sas_addr[i]); + + /* Set the Transmit Size to 1024 bytes, 0 = 256 Dwords. */ + asd_write_reg_byte(asd_ha, LmMnXMTSIZE(lseq, 1), 0); + + /* Set the Bus Inactivity Time Limit Timer. */ + asd_write_reg_word(asd_ha, LmBITL_TIMER(lseq), 9); + + /* Enable SATA Port Multiplier. */ + asd_write_reg_byte(asd_ha, LmMnSATAFS(lseq, 1), 0x80); + + /* Initialize Interrupt Vector[0-10] address in Mode 3. + * See the comment on CSEQ_INT_* */ + asd_write_reg_word(asd_ha, LmM3INTVEC0(lseq), lseq_vecs[0]); + asd_write_reg_word(asd_ha, LmM3INTVEC1(lseq), lseq_vecs[1]); + asd_write_reg_word(asd_ha, LmM3INTVEC2(lseq), lseq_vecs[2]); + asd_write_reg_word(asd_ha, LmM3INTVEC3(lseq), lseq_vecs[3]); + asd_write_reg_word(asd_ha, LmM3INTVEC4(lseq), lseq_vecs[4]); + asd_write_reg_word(asd_ha, LmM3INTVEC5(lseq), lseq_vecs[5]); + asd_write_reg_word(asd_ha, LmM3INTVEC6(lseq), lseq_vecs[6]); + asd_write_reg_word(asd_ha, LmM3INTVEC7(lseq), lseq_vecs[7]); + asd_write_reg_word(asd_ha, LmM3INTVEC8(lseq), lseq_vecs[8]); + asd_write_reg_word(asd_ha, LmM3INTVEC9(lseq), lseq_vecs[9]); + asd_write_reg_word(asd_ha, LmM3INTVEC10(lseq), lseq_vecs[10]); + /* + * Program the Link LED control, applicable only for + * Chip Rev. B or later. + */ + asd_write_reg_dword(asd_ha, LmCONTROL(lseq), + (LEDTIMER | LEDMODE_TXRX | LEDTIMERS_100ms)); + + /* Set the Align Rate for SAS and STP mode. */ + asd_write_reg_byte(asd_ha, LmM1SASALIGN(lseq), SAS_ALIGN_DEFAULT); + asd_write_reg_byte(asd_ha, LmM1STPALIGN(lseq), STP_ALIGN_DEFAULT); +} + + +/** + * asd_post_init_cseq -- clear CSEQ Mode n Int. status and Response mailbox + * @asd_ha: pointer to host adapter struct + */ +static void asd_post_init_cseq(struct asd_ha_struct *asd_ha) +{ + int i; + + for (i = 0; i < 8; i++) + asd_write_reg_dword(asd_ha, CMnINT(i), 0xFFFFFFFF); + for (i = 0; i < 8; i++) + asd_read_reg_dword(asd_ha, CMnRSPMBX(i)); + /* Reset the external interrupt arbiter. */ + asd_write_reg_byte(asd_ha, CARP2INTCTL, RSTINTCTL); +} + +/** + * asd_init_ddb_0 -- initialize DDB 0 + * @asd_ha: pointer to host adapter structure + * + * Initialize DDB site 0 which is used internally by the sequencer. + */ +static void asd_init_ddb_0(struct asd_ha_struct *asd_ha) +{ + int i; + + /* Zero out the DDB explicitly */ + for (i = 0; i < sizeof(struct asd_ddb_seq_shared); i+=4) + asd_ddbsite_write_dword(asd_ha, 0, i, 0); + + asd_ddbsite_write_word(asd_ha, 0, + offsetof(struct asd_ddb_seq_shared, q_free_ddb_head), 0); + asd_ddbsite_write_word(asd_ha, 0, + offsetof(struct asd_ddb_seq_shared, q_free_ddb_tail), + asd_ha->hw_prof.max_ddbs-1); + asd_ddbsite_write_word(asd_ha, 0, + offsetof(struct asd_ddb_seq_shared, q_free_ddb_cnt), 0); + asd_ddbsite_write_word(asd_ha, 0, + offsetof(struct asd_ddb_seq_shared, q_used_ddb_head), 0xFFFF); + asd_ddbsite_write_word(asd_ha, 0, + offsetof(struct asd_ddb_seq_shared, q_used_ddb_tail), 0xFFFF); + asd_ddbsite_write_word(asd_ha, 0, + offsetof(struct asd_ddb_seq_shared, shared_mem_lock), 0); + asd_ddbsite_write_word(asd_ha, 0, + offsetof(struct asd_ddb_seq_shared, smp_conn_tag), 0); + asd_ddbsite_write_word(asd_ha, 0, + offsetof(struct asd_ddb_seq_shared, est_nexus_buf_cnt), 0); + asd_ddbsite_write_word(asd_ha, 0, + offsetof(struct asd_ddb_seq_shared, est_nexus_buf_thresh), + asd_ha->hw_prof.num_phys * 2); + asd_ddbsite_write_byte(asd_ha, 0, + offsetof(struct asd_ddb_seq_shared, settable_max_contexts),0); + asd_ddbsite_write_byte(asd_ha, 0, + offsetof(struct asd_ddb_seq_shared, conn_not_active), 0xFF); + asd_ddbsite_write_byte(asd_ha, 0, + offsetof(struct asd_ddb_seq_shared, phy_is_up), 0x00); + /* DDB 0 is reserved */ + set_bit(0, asd_ha->hw_prof.ddb_bitmap); +} + +/** + * asd_seq_setup_seqs -- setup and initialize central and link sequencers + * @asd_ha: pointer to host adapter structure + */ +static void asd_seq_setup_seqs(struct asd_ha_struct *asd_ha) +{ + int lseq; + u8 lseq_mask; + + /* Initialize SCB sites. Done first to compute some values which + * the rest of the init code depends on. */ + asd_init_scb_sites(asd_ha); + + /* Initialize CSEQ Scratch RAM registers. */ + asd_init_cseq_scratch(asd_ha); + + /* Initialize LmSEQ Scratch RAM registers. */ + asd_init_lseq_scratch(asd_ha); + + /* Initialize CSEQ CIO registers. */ + asd_init_cseq_cio(asd_ha); + + asd_init_ddb_0(asd_ha); + + /* Initialize LmSEQ CIO registers. */ + lseq_mask = asd_ha->hw_prof.enabled_phys; + for_each_sequencer(lseq_mask, lseq_mask, lseq) + asd_init_lseq_cio(asd_ha, lseq); + asd_post_init_cseq(asd_ha); +} + + +/** + * asd_seq_start_cseq -- start the central sequencer, CSEQ + * @asd_ha: pointer to host adapter structure + */ +static int asd_seq_start_cseq(struct asd_ha_struct *asd_ha) +{ + /* Reset the ARP2 instruction to location zero. */ + asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop); + + /* Unpause the CSEQ */ + return asd_unpause_cseq(asd_ha); +} + +/** + * asd_seq_start_lseq -- start a link sequencer + * @asd_ha: pointer to host adapter structure + * @lseq: the link sequencer of interest + */ +static int asd_seq_start_lseq(struct asd_ha_struct *asd_ha, int lseq) +{ + /* Reset the ARP2 instruction to location zero. */ + asd_write_reg_word(asd_ha, LmPRGMCNT(lseq), lseq_idle_loop); + + /* Unpause the LmSEQ */ + return asd_seq_unpause_lseq(asd_ha, lseq); +} + +static int asd_request_firmware(struct asd_ha_struct *asd_ha) +{ + int err, i; + struct sequencer_file_header header, *hdr_ptr; + u32 csum = 0; + u16 *ptr_cseq_vecs, *ptr_lseq_vecs; + + if (sequencer_fw) + /* already loaded */ + return 0; + + err = request_firmware(&sequencer_fw, + SAS_RAZOR_SEQUENCER_FW_FILE, + &asd_ha->pcidev->dev); + if (err) + return err; + + hdr_ptr = (struct sequencer_file_header *)sequencer_fw->data; + + header.csum = le32_to_cpu(hdr_ptr->csum); + header.major = le32_to_cpu(hdr_ptr->major); + header.minor = le32_to_cpu(hdr_ptr->minor); + sequencer_version = hdr_ptr->version; + header.cseq_table_offset = le32_to_cpu(hdr_ptr->cseq_table_offset); + header.cseq_table_size = le32_to_cpu(hdr_ptr->cseq_table_size); + header.lseq_table_offset = le32_to_cpu(hdr_ptr->lseq_table_offset); + header.lseq_table_size = le32_to_cpu(hdr_ptr->lseq_table_size); + header.cseq_code_offset = le32_to_cpu(hdr_ptr->cseq_code_offset); + header.cseq_code_size = le32_to_cpu(hdr_ptr->cseq_code_size); + header.lseq_code_offset = le32_to_cpu(hdr_ptr->lseq_code_offset); + header.lseq_code_size = le32_to_cpu(hdr_ptr->lseq_code_size); + header.mode2_task = le16_to_cpu(hdr_ptr->mode2_task); + header.cseq_idle_loop = le16_to_cpu(hdr_ptr->cseq_idle_loop); + header.lseq_idle_loop = le16_to_cpu(hdr_ptr->lseq_idle_loop); + + for (i = sizeof(header.csum); i < sequencer_fw->size; i++) + csum += sequencer_fw->data[i]; + + if (csum != header.csum) { + asd_printk("Firmware file checksum mismatch\n"); + return -EINVAL; + } + + if (header.cseq_table_size != CSEQ_NUM_VECS || + header.lseq_table_size != LSEQ_NUM_VECS) { + asd_printk("Firmware file table size mismatch\n"); + return -EINVAL; + } + + ptr_cseq_vecs = (u16 *)&sequencer_fw->data[header.cseq_table_offset]; + ptr_lseq_vecs = (u16 *)&sequencer_fw->data[header.lseq_table_offset]; + mode2_task = header.mode2_task; + cseq_idle_loop = header.cseq_idle_loop; + lseq_idle_loop = header.lseq_idle_loop; + + for (i = 0; i < CSEQ_NUM_VECS; i++) + cseq_vecs[i] = le16_to_cpu(ptr_cseq_vecs[i]); + + for (i = 0; i < LSEQ_NUM_VECS; i++) + lseq_vecs[i] = le16_to_cpu(ptr_lseq_vecs[i]); + + cseq_code = &sequencer_fw->data[header.cseq_code_offset]; + cseq_code_size = header.cseq_code_size; + lseq_code = &sequencer_fw->data[header.lseq_code_offset]; + lseq_code_size = header.lseq_code_size; + + return 0; +} + +int asd_init_seqs(struct asd_ha_struct *asd_ha) +{ + int err; + + err = asd_request_firmware(asd_ha); + + if (err) { + asd_printk("Failed to load sequencer firmware file %s, error %d\n", + SAS_RAZOR_SEQUENCER_FW_FILE, err); + return err; + } + + asd_printk("using sequencer %s\n", sequencer_version); + err = asd_seq_download_seqs(asd_ha); + if (err) { + asd_printk("couldn't download sequencers for %s\n", + pci_name(asd_ha->pcidev)); + return err; + } + + asd_seq_setup_seqs(asd_ha); + + return 0; +} + +int asd_start_seqs(struct asd_ha_struct *asd_ha) +{ + int err; + u8 lseq_mask; + int lseq; + + err = asd_seq_start_cseq(asd_ha); + if (err) { + asd_printk("couldn't start CSEQ for %s\n", + pci_name(asd_ha->pcidev)); + return err; + } + + lseq_mask = asd_ha->hw_prof.enabled_phys; + for_each_sequencer(lseq_mask, lseq_mask, lseq) { + err = asd_seq_start_lseq(asd_ha, lseq); + if (err) { + asd_printk("coudln't start LSEQ %d for %s\n", lseq, + pci_name(asd_ha->pcidev)); + return err; + } + } + + return 0; +} + +/** + * asd_update_port_links -- update port_map_by_links and phy_is_up + * @sas_phy: pointer to the phy which has been added to a port + * + * 1) When a link reset has completed and we got BYTES DMAED with a + * valid frame we call this function for that phy, to indicate that + * the phy is up, i.e. we update the phy_is_up in DDB 0. The + * sequencer checks phy_is_up when pending SCBs are to be sent, and + * when an open address frame has been received. + * + * 2) When we know of ports, we call this function to update the map + * of phys participaing in that port, i.e. we update the + * port_map_by_links in DDB 0. When a HARD_RESET primitive has been + * received, the sequencer disables all phys in that port. + * port_map_by_links is also used as the conn_mask byte in the + * initiator/target port DDB. + */ +void asd_update_port_links(struct asd_sas_phy *sas_phy) +{ + struct asd_ha_struct *asd_ha = sas_phy->ha->lldd_ha; + const u8 phy_mask = (u8) sas_phy->port->phy_mask; + u8 phy_is_up; + u8 mask; + int i, err; + + for_each_phy(phy_mask, mask, i) + asd_ddbsite_write_byte(asd_ha, 0, + offsetof(struct asd_ddb_seq_shared, + port_map_by_links)+i,phy_mask); + + for (i = 0; i < 12; i++) { + phy_is_up = asd_ddbsite_read_byte(asd_ha, 0, + offsetof(struct asd_ddb_seq_shared, phy_is_up)); + err = asd_ddbsite_update_byte(asd_ha, 0, + offsetof(struct asd_ddb_seq_shared, phy_is_up), + phy_is_up, + phy_is_up | phy_mask); + if (!err) + break; + else if (err == -EFAULT) { + asd_printk("phy_is_up: parity error in DDB 0\n"); + break; + } + } + + if (err) + asd_printk("couldn't update DDB 0:error:%d\n", err); +} + +MODULE_FIRMWARE(SAS_RAZOR_SEQUENCER_FW_FILE); diff --git a/drivers/scsi/aic94xx/aic94xx_seq.h b/drivers/scsi/aic94xx/aic94xx_seq.h new file mode 100644 index 00000000000..42281c36153 --- /dev/null +++ b/drivers/scsi/aic94xx/aic94xx_seq.h @@ -0,0 +1,70 @@ +/* + * Aic94xx SAS/SATA driver sequencer interface header file. + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This file is part of the aic94xx driver. + * + * The aic94xx driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * The aic94xx driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the aic94xx driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#ifndef _AIC94XX_SEQ_H_ +#define _AIC94XX_SEQ_H_ + +#define CSEQ_NUM_VECS 3 +#define LSEQ_NUM_VECS 11 + +#define SAS_RAZOR_SEQUENCER_FW_FILE "aic94xx-seq.fw" + +/* Note: All quantites in the sequencer file are little endian */ +struct sequencer_file_header { + /* Checksum of the entire contents of the sequencer excluding + * these four bytes */ + u32 csum; + /* numeric major version */ + u32 major; + /* numeric minor version */ + u32 minor; + /* version string printed by driver */ + char version[16]; + u32 cseq_table_offset; + u32 cseq_table_size; + u32 lseq_table_offset; + u32 lseq_table_size; + u32 cseq_code_offset; + u32 cseq_code_size; + u32 lseq_code_offset; + u32 lseq_code_size; + u16 mode2_task; + u16 cseq_idle_loop; + u16 lseq_idle_loop; +} __attribute__((packed)); + +#ifdef __KERNEL__ +int asd_pause_cseq(struct asd_ha_struct *asd_ha); +int asd_unpause_cseq(struct asd_ha_struct *asd_ha); +int asd_pause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask); +int asd_unpause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask); +int asd_init_seqs(struct asd_ha_struct *asd_ha); +int asd_start_seqs(struct asd_ha_struct *asd_ha); + +void asd_update_port_links(struct asd_sas_phy *phy); +#endif + +#endif diff --git a/drivers/scsi/aic94xx/aic94xx_task.c b/drivers/scsi/aic94xx/aic94xx_task.c new file mode 100644 index 00000000000..d202ed5a670 --- /dev/null +++ b/drivers/scsi/aic94xx/aic94xx_task.c @@ -0,0 +1,642 @@ +/* + * Aic94xx SAS/SATA Tasks + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This file is part of the aic94xx driver. + * + * The aic94xx driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * The aic94xx driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the aic94xx driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include <linux/spinlock.h> +#include "aic94xx.h" +#include "aic94xx_sas.h" +#include "aic94xx_hwi.h" + +static void asd_unbuild_ata_ascb(struct asd_ascb *a); +static void asd_unbuild_smp_ascb(struct asd_ascb *a); +static void asd_unbuild_ssp_ascb(struct asd_ascb *a); + +static inline void asd_can_dequeue(struct asd_ha_struct *asd_ha, int num) +{ + unsigned long flags; + + spin_lock_irqsave(&asd_ha->seq.pend_q_lock, flags); + asd_ha->seq.can_queue += num; + spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags); +} + +/* PCI_DMA_... to our direction translation. + */ +static const u8 data_dir_flags[] = { + [PCI_DMA_BIDIRECTIONAL] = DATA_DIR_BYRECIPIENT, /* UNSPECIFIED */ + [PCI_DMA_TODEVICE] = DATA_DIR_OUT, /* OUTBOUND */ + [PCI_DMA_FROMDEVICE] = DATA_DIR_IN, /* INBOUND */ + [PCI_DMA_NONE] = DATA_DIR_NONE, /* NO TRANSFER */ +}; + +static inline int asd_map_scatterlist(struct sas_task *task, + struct sg_el *sg_arr, + gfp_t gfp_flags) +{ + struct asd_ascb *ascb = task->lldd_task; + struct asd_ha_struct *asd_ha = ascb->ha; + struct scatterlist *sc; + int num_sg, res; + + if (task->data_dir == PCI_DMA_NONE) + return 0; + + if (task->num_scatter == 0) { + void *p = task->scatter; + dma_addr_t dma = pci_map_single(asd_ha->pcidev, p, + task->total_xfer_len, + task->data_dir); + sg_arr[0].bus_addr = cpu_to_le64((u64)dma); + sg_arr[0].size = cpu_to_le32(task->total_xfer_len); + sg_arr[0].flags |= ASD_SG_EL_LIST_EOL; + return 0; + } + + num_sg = pci_map_sg(asd_ha->pcidev, task->scatter, task->num_scatter, + task->data_dir); + if (num_sg == 0) + return -ENOMEM; + + if (num_sg > 3) { + int i; + + ascb->sg_arr = asd_alloc_coherent(asd_ha, + num_sg*sizeof(struct sg_el), + gfp_flags); + if (!ascb->sg_arr) { + res = -ENOMEM; + goto err_unmap; + } + for (sc = task->scatter, i = 0; i < num_sg; i++, sc++) { + struct sg_el *sg = + &((struct sg_el *)ascb->sg_arr->vaddr)[i]; + sg->bus_addr = cpu_to_le64((u64)sg_dma_address(sc)); + sg->size = cpu_to_le32((u32)sg_dma_len(sc)); + if (i == num_sg-1) + sg->flags |= ASD_SG_EL_LIST_EOL; + } + + for (sc = task->scatter, i = 0; i < 2; i++, sc++) { + sg_arr[i].bus_addr = + cpu_to_le64((u64)sg_dma_address(sc)); + sg_arr[i].size = cpu_to_le32((u32)sg_dma_len(sc)); + } + sg_arr[1].next_sg_offs = 2 * sizeof(*sg_arr); + sg_arr[1].flags |= ASD_SG_EL_LIST_EOS; + + memset(&sg_arr[2], 0, sizeof(*sg_arr)); + sg_arr[2].bus_addr=cpu_to_le64((u64)ascb->sg_arr->dma_handle); + } else { + int i; + for (sc = task->scatter, i = 0; i < num_sg; i++, sc++) { + sg_arr[i].bus_addr = + cpu_to_le64((u64)sg_dma_address(sc)); + sg_arr[i].size = cpu_to_le32((u32)sg_dma_len(sc)); + } + sg_arr[i-1].flags |= ASD_SG_EL_LIST_EOL; + } + + return 0; +err_unmap: + pci_unmap_sg(asd_ha->pcidev, task->scatter, task->num_scatter, + task->data_dir); + return res; +} + +static inline void asd_unmap_scatterlist(struct asd_ascb *ascb) +{ + struct asd_ha_struct *asd_ha = ascb->ha; + struct sas_task *task = ascb->uldd_task; + + if (task->data_dir == PCI_DMA_NONE) + return; + + if (task->num_scatter == 0) { + dma_addr_t dma = (dma_addr_t) + le64_to_cpu(ascb->scb->ssp_task.sg_element[0].bus_addr); + pci_unmap_single(ascb->ha->pcidev, dma, task->total_xfer_len, + task->data_dir); + return; + } + + asd_free_coherent(asd_ha, ascb->sg_arr); + pci_unmap_sg(asd_ha->pcidev, task->scatter, task->num_scatter, + task->data_dir); +} + +/* ---------- Task complete tasklet ---------- */ + +static void asd_get_response_tasklet(struct asd_ascb *ascb, + struct done_list_struct *dl) +{ + struct asd_ha_struct *asd_ha = ascb->ha; + struct sas_task *task = ascb->uldd_task; + struct task_status_struct *ts = &task->task_status; + unsigned long flags; + struct tc_resp_sb_struct { + __le16 index_escb; + u8 len_lsb; + u8 flags; + } __attribute__ ((packed)) *resp_sb = (void *) dl->status_block; + +/* int size = ((resp_sb->flags & 7) << 8) | resp_sb->len_lsb; */ + int edb_id = ((resp_sb->flags & 0x70) >> 4)-1; + struct asd_ascb *escb; + struct asd_dma_tok *edb; + void *r; + + spin_lock_irqsave(&asd_ha->seq.tc_index_lock, flags); + escb = asd_tc_index_find(&asd_ha->seq, + (int)le16_to_cpu(resp_sb->index_escb)); + spin_unlock_irqrestore(&asd_ha->seq.tc_index_lock, flags); + + if (!escb) { + ASD_DPRINTK("Uh-oh! No escb for this dl?!\n"); + return; + } + + ts->buf_valid_size = 0; + edb = asd_ha->seq.edb_arr[edb_id + escb->edb_index]; + r = edb->vaddr; + if (task->task_proto == SAS_PROTO_SSP) { + struct ssp_response_iu *iu = + r + 16 + sizeof(struct ssp_frame_hdr); + + ts->residual = le32_to_cpu(*(__le32 *)r); + ts->resp = SAS_TASK_COMPLETE; + if (iu->datapres == 0) + ts->stat = iu->status; + else if (iu->datapres == 1) + ts->stat = iu->resp_data[3]; + else if (iu->datapres == 2) { + ts->stat = SAM_CHECK_COND; + ts->buf_valid_size = min((u32) SAS_STATUS_BUF_SIZE, + be32_to_cpu(iu->sense_data_len)); + memcpy(ts->buf, iu->sense_data, ts->buf_valid_size); + if (iu->status != SAM_CHECK_COND) { + ASD_DPRINTK("device %llx sent sense data, but " + "stat(0x%x) is not CHECK_CONDITION" + "\n", + SAS_ADDR(task->dev->sas_addr), + ts->stat); + } + } + } else { + struct ata_task_resp *resp = (void *) &ts->buf[0]; + + ts->residual = le32_to_cpu(*(__le32 *)r); + + if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) { + resp->frame_len = le16_to_cpu(*(__le16 *)(r+6)); + memcpy(&resp->ending_fis[0], r+16, 24); + ts->buf_valid_size = sizeof(*resp); + } + } + + asd_invalidate_edb(escb, edb_id); +} + +static void asd_task_tasklet_complete(struct asd_ascb *ascb, + struct done_list_struct *dl) +{ + struct sas_task *task = ascb->uldd_task; + struct task_status_struct *ts = &task->task_status; + unsigned long flags; + u8 opcode = dl->opcode; + + asd_can_dequeue(ascb->ha, 1); + +Again: + switch (opcode) { + case TC_NO_ERROR: + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAM_GOOD; + break; + case TC_UNDERRUN: + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DATA_UNDERRUN; + ts->residual = le32_to_cpu(*(__le32 *)dl->status_block); + break; + case TC_OVERRUN: + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DATA_OVERRUN; + ts->residual = 0; + break; + case TC_SSP_RESP: + case TC_ATA_RESP: + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_PROTO_RESPONSE; + asd_get_response_tasklet(ascb, dl); + break; + case TF_OPEN_REJECT: + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_OPEN_REJECT; + if (dl->status_block[1] & 2) + ts->open_rej_reason = 1 + dl->status_block[2]; + else if (dl->status_block[1] & 1) + ts->open_rej_reason = (dl->status_block[2] >> 4)+10; + else + ts->open_rej_reason = SAS_OREJ_UNKNOWN; + break; + case TF_OPEN_TO: + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_OPEN_TO; + break; + case TF_PHY_DOWN: + case TU_PHY_DOWN: + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_PHY_DOWN; + break; + case TI_PHY_DOWN: + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_PHY_DOWN; + break; + case TI_BREAK: + case TI_PROTO_ERR: + case TI_NAK: + case TI_ACK_NAK_TO: + case TF_SMP_XMIT_RCV_ERR: + case TC_ATA_R_ERR_RECV: + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_INTERRUPTED; + break; + case TF_BREAK: + case TU_BREAK: + case TU_ACK_NAK_TO: + case TF_SMPRSP_TO: + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_DEV_NO_RESPONSE; + break; + case TF_NAK_RECV: + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_NAK_R_ERR; + break; + case TA_I_T_NEXUS_LOSS: + opcode = dl->status_block[0]; + goto Again; + break; + case TF_INV_CONN_HANDLE: + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_DEVICE_UNKNOWN; + break; + case TF_REQUESTED_N_PENDING: + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_PENDING; + break; + case TC_TASK_CLEARED: + case TA_ON_REQ: + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_ABORTED_TASK; + break; + + case TF_NO_SMP_CONN: + case TF_TMF_NO_CTX: + case TF_TMF_NO_TAG: + case TF_TMF_TAG_FREE: + case TF_TMF_TASK_DONE: + case TF_TMF_NO_CONN_HANDLE: + case TF_IRTT_TO: + case TF_IU_SHORT: + case TF_DATA_OFFS_ERR: + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_DEV_NO_RESPONSE; + break; + + case TC_LINK_ADM_RESP: + case TC_CONTROL_PHY: + case TC_RESUME: + case TC_PARTIAL_SG_LIST: + default: + ASD_DPRINTK("%s: dl opcode: 0x%x?\n", __FUNCTION__, opcode); + break; + } + + switch (task->task_proto) { + case SATA_PROTO: + case SAS_PROTO_STP: + asd_unbuild_ata_ascb(ascb); + break; + case SAS_PROTO_SMP: + asd_unbuild_smp_ascb(ascb); + break; + case SAS_PROTO_SSP: + asd_unbuild_ssp_ascb(ascb); + default: + break; + } + + spin_lock_irqsave(&task->task_state_lock, flags); + task->task_state_flags &= ~SAS_TASK_STATE_PENDING; + task->task_state_flags |= SAS_TASK_STATE_DONE; + if (unlikely((task->task_state_flags & SAS_TASK_STATE_ABORTED))) { + spin_unlock_irqrestore(&task->task_state_lock, flags); + ASD_DPRINTK("task 0x%p done with opcode 0x%x resp 0x%x " + "stat 0x%x but aborted by upper layer!\n", + task, opcode, ts->resp, ts->stat); + complete(&ascb->completion); + } else { + spin_unlock_irqrestore(&task->task_state_lock, flags); + task->lldd_task = NULL; + asd_ascb_free(ascb); + mb(); + task->task_done(task); + } +} + +/* ---------- ATA ---------- */ + +static int asd_build_ata_ascb(struct asd_ascb *ascb, struct sas_task *task, + gfp_t gfp_flags) +{ + struct domain_device *dev = task->dev; + struct scb *scb; + u8 flags; + int res = 0; + + scb = ascb->scb; + + if (unlikely(task->ata_task.device_control_reg_update)) + scb->header.opcode = CONTROL_ATA_DEV; + else if (dev->sata_dev.command_set == ATA_COMMAND_SET) + scb->header.opcode = INITIATE_ATA_TASK; + else + scb->header.opcode = INITIATE_ATAPI_TASK; + + scb->ata_task.proto_conn_rate = (1 << 5); /* STP */ + if (dev->port->oob_mode == SAS_OOB_MODE) + scb->ata_task.proto_conn_rate |= dev->linkrate; + + scb->ata_task.total_xfer_len = cpu_to_le32(task->total_xfer_len); + scb->ata_task.fis = task->ata_task.fis; + scb->ata_task.fis.fis_type = 0x27; + if (likely(!task->ata_task.device_control_reg_update)) + scb->ata_task.fis.flags |= 0x80; /* C=1: update ATA cmd reg */ + scb->ata_task.fis.flags &= 0xF0; /* PM_PORT field shall be 0 */ + if (dev->sata_dev.command_set == ATAPI_COMMAND_SET) + memcpy(scb->ata_task.atapi_packet, task->ata_task.atapi_packet, + 16); + scb->ata_task.sister_scb = cpu_to_le16(0xFFFF); + scb->ata_task.conn_handle = cpu_to_le16( + (u16)(unsigned long)dev->lldd_dev); + + if (likely(!task->ata_task.device_control_reg_update)) { + flags = 0; + if (task->ata_task.dma_xfer) + flags |= DATA_XFER_MODE_DMA; + if (task->ata_task.use_ncq && + dev->sata_dev.command_set != ATAPI_COMMAND_SET) + flags |= ATA_Q_TYPE_NCQ; + flags |= data_dir_flags[task->data_dir]; + scb->ata_task.ata_flags = flags; + + scb->ata_task.retry_count = task->ata_task.retry_count; + + flags = 0; + if (task->ata_task.set_affil_pol) + flags |= SET_AFFIL_POLICY; + if (task->ata_task.stp_affil_pol) + flags |= STP_AFFIL_POLICY; + scb->ata_task.flags = flags; + } + ascb->tasklet_complete = asd_task_tasklet_complete; + + if (likely(!task->ata_task.device_control_reg_update)) + res = asd_map_scatterlist(task, scb->ata_task.sg_element, + gfp_flags); + + return res; +} + +static void asd_unbuild_ata_ascb(struct asd_ascb *a) +{ + asd_unmap_scatterlist(a); +} + +/* ---------- SMP ---------- */ + +static int asd_build_smp_ascb(struct asd_ascb *ascb, struct sas_task *task, + gfp_t gfp_flags) +{ + struct asd_ha_struct *asd_ha = ascb->ha; + struct domain_device *dev = task->dev; + struct scb *scb; + + pci_map_sg(asd_ha->pcidev, &task->smp_task.smp_req, 1, + PCI_DMA_FROMDEVICE); + pci_map_sg(asd_ha->pcidev, &task->smp_task.smp_resp, 1, + PCI_DMA_FROMDEVICE); + + scb = ascb->scb; + + scb->header.opcode = INITIATE_SMP_TASK; + + scb->smp_task.proto_conn_rate = dev->linkrate; + + scb->smp_task.smp_req.bus_addr = + cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_req)); + scb->smp_task.smp_req.size = + cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_req)-4); + + scb->smp_task.smp_resp.bus_addr = + cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_resp)); + scb->smp_task.smp_resp.size = + cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_resp)-4); + + scb->smp_task.sister_scb = cpu_to_le16(0xFFFF); + scb->smp_task.conn_handle = cpu_to_le16((u16) + (unsigned long)dev->lldd_dev); + + ascb->tasklet_complete = asd_task_tasklet_complete; + + return 0; +} + +static void asd_unbuild_smp_ascb(struct asd_ascb *a) +{ + struct sas_task *task = a->uldd_task; + + BUG_ON(!task); + pci_unmap_sg(a->ha->pcidev, &task->smp_task.smp_req, 1, + PCI_DMA_FROMDEVICE); + pci_unmap_sg(a->ha->pcidev, &task->smp_task.smp_resp, 1, + PCI_DMA_FROMDEVICE); +} + +/* ---------- SSP ---------- */ + +static int asd_build_ssp_ascb(struct asd_ascb *ascb, struct sas_task *task, + gfp_t gfp_flags) +{ + struct domain_device *dev = task->dev; + struct scb *scb; + int res = 0; + + scb = ascb->scb; + + scb->header.opcode = INITIATE_SSP_TASK; + + scb->ssp_task.proto_conn_rate = (1 << 4); /* SSP */ + scb->ssp_task.proto_conn_rate |= dev->linkrate; + scb->ssp_task.total_xfer_len = cpu_to_le32(task->total_xfer_len); + scb->ssp_task.ssp_frame.frame_type = SSP_DATA; + memcpy(scb->ssp_task.ssp_frame.hashed_dest_addr, dev->hashed_sas_addr, + HASHED_SAS_ADDR_SIZE); + memcpy(scb->ssp_task.ssp_frame.hashed_src_addr, + dev->port->ha->hashed_sas_addr, HASHED_SAS_ADDR_SIZE); + scb->ssp_task.ssp_frame.tptt = cpu_to_be16(0xFFFF); + + memcpy(scb->ssp_task.ssp_cmd.lun, task->ssp_task.LUN, 8); + if (task->ssp_task.enable_first_burst) + scb->ssp_task.ssp_cmd.efb_prio_attr |= EFB_MASK; + scb->ssp_task.ssp_cmd.efb_prio_attr |= (task->ssp_task.task_prio << 3); + scb->ssp_task.ssp_cmd.efb_prio_attr |= (task->ssp_task.task_attr & 7); + memcpy(scb->ssp_task.ssp_cmd.cdb, task->ssp_task.cdb, 16); + + scb->ssp_task.sister_scb = cpu_to_le16(0xFFFF); + scb->ssp_task.conn_handle = cpu_to_le16( + (u16)(unsigned long)dev->lldd_dev); + scb->ssp_task.data_dir = data_dir_flags[task->data_dir]; + scb->ssp_task.retry_count = scb->ssp_task.retry_count; + + ascb->tasklet_complete = asd_task_tasklet_complete; + + res = asd_map_scatterlist(task, scb->ssp_task.sg_element, gfp_flags); + + return res; +} + +static void asd_unbuild_ssp_ascb(struct asd_ascb *a) +{ + asd_unmap_scatterlist(a); +} + +/* ---------- Execute Task ---------- */ + +static inline int asd_can_queue(struct asd_ha_struct *asd_ha, int num) +{ + int res = 0; + unsigned long flags; + + spin_lock_irqsave(&asd_ha->seq.pend_q_lock, flags); + if ((asd_ha->seq.can_queue - num) < 0) + res = -SAS_QUEUE_FULL; + else + asd_ha->seq.can_queue -= num; + spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags); + + return res; +} + +int asd_execute_task(struct sas_task *task, const int num, + gfp_t gfp_flags) +{ + int res = 0; + LIST_HEAD(alist); + struct sas_task *t = task; + struct asd_ascb *ascb = NULL, *a; + struct asd_ha_struct *asd_ha = task->dev->port->ha->lldd_ha; + + res = asd_can_queue(asd_ha, num); + if (res) + return res; + + res = num; + ascb = asd_ascb_alloc_list(asd_ha, &res, gfp_flags); + if (res) { + res = -ENOMEM; + goto out_err; + } + + __list_add(&alist, ascb->list.prev, &ascb->list); + list_for_each_entry(a, &alist, list) { + a->uldd_task = t; + t->lldd_task = a; + t = list_entry(t->list.next, struct sas_task, list); + } + list_for_each_entry(a, &alist, list) { + t = a->uldd_task; + a->uldd_timer = 1; + if (t->task_proto & SAS_PROTO_STP) + t->task_proto = SAS_PROTO_STP; + switch (t->task_proto) { + case SATA_PROTO: + case SAS_PROTO_STP: + res = asd_build_ata_ascb(a, t, gfp_flags); + break; + case SAS_PROTO_SMP: + res = asd_build_smp_ascb(a, t, gfp_flags); + break; + case SAS_PROTO_SSP: + res = asd_build_ssp_ascb(a, t, gfp_flags); + break; + default: + asd_printk("unknown sas_task proto: 0x%x\n", + t->task_proto); + res = -ENOMEM; + break; + } + if (res) + goto out_err_unmap; + } + list_del_init(&alist); + + res = asd_post_ascb_list(asd_ha, ascb, num); + if (unlikely(res)) { + a = NULL; + __list_add(&alist, ascb->list.prev, &ascb->list); + goto out_err_unmap; + } + + return 0; +out_err_unmap: + { + struct asd_ascb *b = a; + list_for_each_entry(a, &alist, list) { + if (a == b) + break; + t = a->uldd_task; + switch (t->task_proto) { + case SATA_PROTO: + case SAS_PROTO_STP: + asd_unbuild_ata_ascb(a); + break; + case SAS_PROTO_SMP: + asd_unbuild_smp_ascb(a); + break; + case SAS_PROTO_SSP: + asd_unbuild_ssp_ascb(a); + default: + break; + } + t->lldd_task = NULL; + } + } + list_del_init(&alist); +out_err: + if (ascb) + asd_ascb_free_list(ascb); + asd_can_dequeue(asd_ha, num); + return res; +} diff --git a/drivers/scsi/aic94xx/aic94xx_tmf.c b/drivers/scsi/aic94xx/aic94xx_tmf.c new file mode 100644 index 00000000000..61234384503 --- /dev/null +++ b/drivers/scsi/aic94xx/aic94xx_tmf.c @@ -0,0 +1,636 @@ +/* + * Aic94xx Task Management Functions + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This file is part of the aic94xx driver. + * + * The aic94xx driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * The aic94xx driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the aic94xx driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include <linux/spinlock.h> +#include "aic94xx.h" +#include "aic94xx_sas.h" +#include "aic94xx_hwi.h" + +/* ---------- Internal enqueue ---------- */ + +static int asd_enqueue_internal(struct asd_ascb *ascb, + void (*tasklet_complete)(struct asd_ascb *, + struct done_list_struct *), + void (*timed_out)(unsigned long)) +{ + int res; + + ascb->tasklet_complete = tasklet_complete; + ascb->uldd_timer = 1; + + ascb->timer.data = (unsigned long) ascb; + ascb->timer.function = timed_out; + ascb->timer.expires = jiffies + AIC94XX_SCB_TIMEOUT; + + add_timer(&ascb->timer); + + res = asd_post_ascb_list(ascb->ha, ascb, 1); + if (unlikely(res)) + del_timer(&ascb->timer); + return res; +} + +static inline void asd_timedout_common(unsigned long data) +{ + struct asd_ascb *ascb = (void *) data; + struct asd_seq_data *seq = &ascb->ha->seq; + unsigned long flags; + + spin_lock_irqsave(&seq->pend_q_lock, flags); + seq->pending--; + list_del_init(&ascb->list); + spin_unlock_irqrestore(&seq->pend_q_lock, flags); +} + +/* ---------- CLEAR NEXUS ---------- */ + +static void asd_clear_nexus_tasklet_complete(struct asd_ascb *ascb, + struct done_list_struct *dl) +{ + ASD_DPRINTK("%s: here\n", __FUNCTION__); + if (!del_timer(&ascb->timer)) { + ASD_DPRINTK("%s: couldn't delete timer\n", __FUNCTION__); + return; + } + ASD_DPRINTK("%s: opcode: 0x%x\n", __FUNCTION__, dl->opcode); + ascb->uldd_task = (void *) (unsigned long) dl->opcode; + complete(&ascb->completion); +} + +static void asd_clear_nexus_timedout(unsigned long data) +{ + struct asd_ascb *ascb = (void *) data; + + ASD_DPRINTK("%s: here\n", __FUNCTION__); + asd_timedout_common(data); + ascb->uldd_task = (void *) TMF_RESP_FUNC_FAILED; + complete(&ascb->completion); +} + +#define CLEAR_NEXUS_PRE \ + ASD_DPRINTK("%s: PRE\n", __FUNCTION__); \ + res = 1; \ + ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL); \ + if (!ascb) \ + return -ENOMEM; \ + \ + scb = ascb->scb; \ + scb->header.opcode = CLEAR_NEXUS + +#define CLEAR_NEXUS_POST \ + ASD_DPRINTK("%s: POST\n", __FUNCTION__); \ + res = asd_enqueue_internal(ascb, asd_clear_nexus_tasklet_complete, \ + asd_clear_nexus_timedout); \ + if (res) \ + goto out_err; \ + ASD_DPRINTK("%s: clear nexus posted, waiting...\n", __FUNCTION__); \ + wait_for_completion(&ascb->completion); \ + res = (int) (unsigned long) ascb->uldd_task; \ + if (res == TC_NO_ERROR) \ + res = TMF_RESP_FUNC_COMPLETE; \ +out_err: \ + asd_ascb_free(ascb); \ + return res + +int asd_clear_nexus_ha(struct sas_ha_struct *sas_ha) +{ + struct asd_ha_struct *asd_ha = sas_ha->lldd_ha; + struct asd_ascb *ascb; + struct scb *scb; + int res; + + CLEAR_NEXUS_PRE; + scb->clear_nexus.nexus = NEXUS_ADAPTER; + CLEAR_NEXUS_POST; +} + +int asd_clear_nexus_port(struct asd_sas_port *port) +{ + struct asd_ha_struct *asd_ha = port->ha->lldd_ha; + struct asd_ascb *ascb; + struct scb *scb; + int res; + + CLEAR_NEXUS_PRE; + scb->clear_nexus.nexus = NEXUS_PORT; + scb->clear_nexus.conn_mask = port->phy_mask; + CLEAR_NEXUS_POST; +} + +#if 0 +static int asd_clear_nexus_I_T(struct domain_device *dev) +{ + struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha; + struct asd_ascb *ascb; + struct scb *scb; + int res; + + CLEAR_NEXUS_PRE; + scb->clear_nexus.nexus = NEXUS_I_T; + scb->clear_nexus.flags = SEND_Q | EXEC_Q | NOTINQ; + if (dev->tproto) + scb->clear_nexus.flags |= SUSPEND_TX; + scb->clear_nexus.conn_handle = cpu_to_le16((u16)(unsigned long) + dev->lldd_dev); + CLEAR_NEXUS_POST; +} +#endif + +static int asd_clear_nexus_I_T_L(struct domain_device *dev, u8 *lun) +{ + struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha; + struct asd_ascb *ascb; + struct scb *scb; + int res; + + CLEAR_NEXUS_PRE; + scb->clear_nexus.nexus = NEXUS_I_T_L; + scb->clear_nexus.flags = SEND_Q | EXEC_Q | NOTINQ; + if (dev->tproto) + scb->clear_nexus.flags |= SUSPEND_TX; + memcpy(scb->clear_nexus.ssp_task.lun, lun, 8); + scb->clear_nexus.conn_handle = cpu_to_le16((u16)(unsigned long) + dev->lldd_dev); + CLEAR_NEXUS_POST; +} + +static int asd_clear_nexus_tag(struct sas_task *task) +{ + struct asd_ha_struct *asd_ha = task->dev->port->ha->lldd_ha; + struct asd_ascb *tascb = task->lldd_task; + struct asd_ascb *ascb; + struct scb *scb; + int res; + + CLEAR_NEXUS_PRE; + scb->clear_nexus.nexus = NEXUS_TAG; + memcpy(scb->clear_nexus.ssp_task.lun, task->ssp_task.LUN, 8); + scb->clear_nexus.ssp_task.tag = tascb->tag; + if (task->dev->tproto) + scb->clear_nexus.conn_handle = cpu_to_le16((u16)(unsigned long) + task->dev->lldd_dev); + CLEAR_NEXUS_POST; +} + +static int asd_clear_nexus_index(struct sas_task *task) +{ + struct asd_ha_struct *asd_ha = task->dev->port->ha->lldd_ha; + struct asd_ascb *tascb = task->lldd_task; + struct asd_ascb *ascb; + struct scb *scb; + int res; + + CLEAR_NEXUS_PRE; + scb->clear_nexus.nexus = NEXUS_TRANS_CX; + if (task->dev->tproto) + scb->clear_nexus.conn_handle = cpu_to_le16((u16)(unsigned long) + task->dev->lldd_dev); + scb->clear_nexus.index = cpu_to_le16(tascb->tc_index); + CLEAR_NEXUS_POST; +} + +/* ---------- TMFs ---------- */ + +static void asd_tmf_timedout(unsigned long data) +{ + struct asd_ascb *ascb = (void *) data; + + ASD_DPRINTK("tmf timed out\n"); + asd_timedout_common(data); + ascb->uldd_task = (void *) TMF_RESP_FUNC_FAILED; + complete(&ascb->completion); +} + +static int asd_get_tmf_resp_tasklet(struct asd_ascb *ascb, + struct done_list_struct *dl) +{ + struct asd_ha_struct *asd_ha = ascb->ha; + unsigned long flags; + struct tc_resp_sb_struct { + __le16 index_escb; + u8 len_lsb; + u8 flags; + } __attribute__ ((packed)) *resp_sb = (void *) dl->status_block; + + int edb_id = ((resp_sb->flags & 0x70) >> 4)-1; + struct asd_ascb *escb; + struct asd_dma_tok *edb; + struct ssp_frame_hdr *fh; + struct ssp_response_iu *ru; + int res = TMF_RESP_FUNC_FAILED; + + ASD_DPRINTK("tmf resp tasklet\n"); + + spin_lock_irqsave(&asd_ha->seq.tc_index_lock, flags); + escb = asd_tc_index_find(&asd_ha->seq, + (int)le16_to_cpu(resp_sb->index_escb)); + spin_unlock_irqrestore(&asd_ha->seq.tc_index_lock, flags); + + if (!escb) { + ASD_DPRINTK("Uh-oh! No escb for this dl?!\n"); + return res; + } + + edb = asd_ha->seq.edb_arr[edb_id + escb->edb_index]; + ascb->tag = *(__be16 *)(edb->vaddr+4); + fh = edb->vaddr + 16; + ru = edb->vaddr + 16 + sizeof(*fh); + res = ru->status; + if (ru->datapres == 1) /* Response data present */ + res = ru->resp_data[3]; +#if 0 + ascb->tag = fh->tag; +#endif + ascb->tag_valid = 1; + + asd_invalidate_edb(escb, edb_id); + return res; +} + +static void asd_tmf_tasklet_complete(struct asd_ascb *ascb, + struct done_list_struct *dl) +{ + if (!del_timer(&ascb->timer)) + return; + + ASD_DPRINTK("tmf tasklet complete\n"); + + if (dl->opcode == TC_SSP_RESP) + ascb->uldd_task = (void *) (unsigned long) + asd_get_tmf_resp_tasklet(ascb, dl); + else + ascb->uldd_task = (void *) 0xFF00 + (unsigned long) dl->opcode; + + complete(&ascb->completion); +} + +static inline int asd_clear_nexus(struct sas_task *task) +{ + int res = TMF_RESP_FUNC_FAILED; + struct asd_ascb *tascb = task->lldd_task; + unsigned long flags; + + ASD_DPRINTK("task not done, clearing nexus\n"); + if (tascb->tag_valid) + res = asd_clear_nexus_tag(task); + else + res = asd_clear_nexus_index(task); + wait_for_completion_timeout(&tascb->completion, + AIC94XX_SCB_TIMEOUT); + ASD_DPRINTK("came back from clear nexus\n"); + spin_lock_irqsave(&task->task_state_lock, flags); + if (task->task_state_flags & SAS_TASK_STATE_DONE) + res = TMF_RESP_FUNC_COMPLETE; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + return res; +} + +/** + * asd_abort_task -- ABORT TASK TMF + * @task: the task to be aborted + * + * Before calling ABORT TASK the task state flags should be ORed with + * SAS_TASK_STATE_ABORTED (unless SAS_TASK_STATE_DONE is set) under + * the task_state_lock IRQ spinlock, then ABORT TASK *must* be called. + * + * Implements the ABORT TASK TMF, I_T_L_Q nexus. + * Returns: SAS TMF responses (see sas_task.h), + * -ENOMEM, + * -SAS_QUEUE_FULL. + * + * When ABORT TASK returns, the caller of ABORT TASK checks first the + * task->task_state_flags, and then the return value of ABORT TASK. + * + * If the task has task state bit SAS_TASK_STATE_DONE set, then the + * task was completed successfully prior to it being aborted. The + * caller of ABORT TASK has responsibility to call task->task_done() + * xor free the task, depending on their framework. The return code + * is TMF_RESP_FUNC_FAILED in this case. + * + * Else the SAS_TASK_STATE_DONE bit is not set, + * If the return code is TMF_RESP_FUNC_COMPLETE, then + * the task was aborted successfully. The caller of + * ABORT TASK has responsibility to call task->task_done() + * to finish the task, xor free the task depending on their + * framework. + * else + * the ABORT TASK returned some kind of error. The task + * was _not_ cancelled. Nothing can be assumed. + * The caller of ABORT TASK may wish to retry. + */ +int asd_abort_task(struct sas_task *task) +{ + struct asd_ascb *tascb = task->lldd_task; + struct asd_ha_struct *asd_ha = tascb->ha; + int res = 1; + unsigned long flags; + struct asd_ascb *ascb = NULL; + struct scb *scb; + + spin_lock_irqsave(&task->task_state_lock, flags); + if (task->task_state_flags & SAS_TASK_STATE_DONE) { + spin_unlock_irqrestore(&task->task_state_lock, flags); + res = TMF_RESP_FUNC_COMPLETE; + ASD_DPRINTK("%s: task 0x%p done\n", __FUNCTION__, task); + goto out_done; + } + spin_unlock_irqrestore(&task->task_state_lock, flags); + + ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL); + if (!ascb) + return -ENOMEM; + scb = ascb->scb; + + scb->header.opcode = ABORT_TASK; + + switch (task->task_proto) { + case SATA_PROTO: + case SAS_PROTO_STP: + scb->abort_task.proto_conn_rate = (1 << 5); /* STP */ + break; + case SAS_PROTO_SSP: + scb->abort_task.proto_conn_rate = (1 << 4); /* SSP */ + scb->abort_task.proto_conn_rate |= task->dev->linkrate; + break; + case SAS_PROTO_SMP: + break; + default: + break; + } + + if (task->task_proto == SAS_PROTO_SSP) { + scb->abort_task.ssp_frame.frame_type = SSP_TASK; + memcpy(scb->abort_task.ssp_frame.hashed_dest_addr, + task->dev->hashed_sas_addr, HASHED_SAS_ADDR_SIZE); + memcpy(scb->abort_task.ssp_frame.hashed_src_addr, + task->dev->port->ha->hashed_sas_addr, + HASHED_SAS_ADDR_SIZE); + scb->abort_task.ssp_frame.tptt = cpu_to_be16(0xFFFF); + + memcpy(scb->abort_task.ssp_task.lun, task->ssp_task.LUN, 8); + scb->abort_task.ssp_task.tmf = TMF_ABORT_TASK; + scb->abort_task.ssp_task.tag = cpu_to_be16(0xFFFF); + } + + scb->abort_task.sister_scb = cpu_to_le16(0xFFFF); + scb->abort_task.conn_handle = cpu_to_le16( + (u16)(unsigned long)task->dev->lldd_dev); + scb->abort_task.retry_count = 1; + scb->abort_task.index = cpu_to_le16((u16)tascb->tc_index); + scb->abort_task.itnl_to = cpu_to_le16(ITNL_TIMEOUT_CONST); + + res = asd_enqueue_internal(ascb, asd_tmf_tasklet_complete, + asd_tmf_timedout); + if (res) + goto out; + wait_for_completion(&ascb->completion); + ASD_DPRINTK("tmf came back\n"); + + res = (int) (unsigned long) ascb->uldd_task; + tascb->tag = ascb->tag; + tascb->tag_valid = ascb->tag_valid; + + spin_lock_irqsave(&task->task_state_lock, flags); + if (task->task_state_flags & SAS_TASK_STATE_DONE) { + spin_unlock_irqrestore(&task->task_state_lock, flags); + res = TMF_RESP_FUNC_COMPLETE; + ASD_DPRINTK("%s: task 0x%p done\n", __FUNCTION__, task); + goto out_done; + } + spin_unlock_irqrestore(&task->task_state_lock, flags); + + switch (res) { + /* The task to be aborted has been sent to the device. + * We got a Response IU for the ABORT TASK TMF. */ + case TC_NO_ERROR + 0xFF00: + case TMF_RESP_FUNC_COMPLETE: + case TMF_RESP_FUNC_FAILED: + res = asd_clear_nexus(task); + break; + case TMF_RESP_INVALID_FRAME: + case TMF_RESP_OVERLAPPED_TAG: + case TMF_RESP_FUNC_ESUPP: + case TMF_RESP_NO_LUN: + goto out_done; break; + } + /* In the following we assume that the managing layer + * will _never_ make a mistake, when issuing ABORT TASK. + */ + switch (res) { + default: + res = asd_clear_nexus(task); + /* fallthrough */ + case TC_NO_ERROR + 0xFF00: + case TMF_RESP_FUNC_COMPLETE: + break; + /* The task hasn't been sent to the device xor we never got + * a (sane) Response IU for the ABORT TASK TMF. + */ + case TF_NAK_RECV + 0xFF00: + res = TMF_RESP_INVALID_FRAME; + break; + case TF_TMF_TASK_DONE + 0xFF00: /* done but not reported yet */ + res = TMF_RESP_FUNC_FAILED; + wait_for_completion_timeout(&tascb->completion, + AIC94XX_SCB_TIMEOUT); + spin_lock_irqsave(&task->task_state_lock, flags); + if (task->task_state_flags & SAS_TASK_STATE_DONE) + res = TMF_RESP_FUNC_COMPLETE; + spin_unlock_irqrestore(&task->task_state_lock, flags); + goto out_done; + case TF_TMF_NO_TAG + 0xFF00: + case TF_TMF_TAG_FREE + 0xFF00: /* the tag is in the free list */ + case TF_TMF_NO_CONN_HANDLE + 0xFF00: /* no such device */ + res = TMF_RESP_FUNC_COMPLETE; + goto out_done; + case TF_TMF_NO_CTX + 0xFF00: /* not in seq, or proto != SSP */ + res = TMF_RESP_FUNC_ESUPP; + goto out; + } +out_done: + if (res == TMF_RESP_FUNC_COMPLETE) { + task->lldd_task = NULL; + mb(); + asd_ascb_free(tascb); + } +out: + asd_ascb_free(ascb); + ASD_DPRINTK("task 0x%p aborted, res: 0x%x\n", task, res); + return res; +} + +/** + * asd_initiate_ssp_tmf -- send a TMF to an I_T_L or I_T_L_Q nexus + * @dev: pointer to struct domain_device of interest + * @lun: pointer to u8[8] which is the LUN + * @tmf: the TMF to be performed (see sas_task.h or the SAS spec) + * @index: the transaction context of the task to be queried if QT TMF + * + * This function is used to send ABORT TASK SET, CLEAR ACA, + * CLEAR TASK SET, LU RESET and QUERY TASK TMFs. + * + * No SCBs should be queued to the I_T_L nexus when this SCB is + * pending. + * + * Returns: TMF response code (see sas_task.h or the SAS spec) + */ +static int asd_initiate_ssp_tmf(struct domain_device *dev, u8 *lun, + int tmf, int index) +{ + struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha; + struct asd_ascb *ascb; + int res = 1; + struct scb *scb; + + if (!(dev->tproto & SAS_PROTO_SSP)) + return TMF_RESP_FUNC_ESUPP; + + ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL); + if (!ascb) + return -ENOMEM; + scb = ascb->scb; + + if (tmf == TMF_QUERY_TASK) + scb->header.opcode = QUERY_SSP_TASK; + else + scb->header.opcode = INITIATE_SSP_TMF; + + scb->ssp_tmf.proto_conn_rate = (1 << 4); /* SSP */ + scb->ssp_tmf.proto_conn_rate |= dev->linkrate; + /* SSP frame header */ + scb->ssp_tmf.ssp_frame.frame_type = SSP_TASK; + memcpy(scb->ssp_tmf.ssp_frame.hashed_dest_addr, + dev->hashed_sas_addr, HASHED_SAS_ADDR_SIZE); + memcpy(scb->ssp_tmf.ssp_frame.hashed_src_addr, + dev->port->ha->hashed_sas_addr, HASHED_SAS_ADDR_SIZE); + scb->ssp_tmf.ssp_frame.tptt = cpu_to_be16(0xFFFF); + /* SSP Task IU */ + memcpy(scb->ssp_tmf.ssp_task.lun, lun, 8); + scb->ssp_tmf.ssp_task.tmf = tmf; + + scb->ssp_tmf.sister_scb = cpu_to_le16(0xFFFF); + scb->ssp_tmf.conn_handle= cpu_to_le16((u16)(unsigned long) + dev->lldd_dev); + scb->ssp_tmf.retry_count = 1; + scb->ssp_tmf.itnl_to = cpu_to_le16(ITNL_TIMEOUT_CONST); + if (tmf == TMF_QUERY_TASK) + scb->ssp_tmf.index = cpu_to_le16(index); + + res = asd_enqueue_internal(ascb, asd_tmf_tasklet_complete, + asd_tmf_timedout); + if (res) + goto out_err; + wait_for_completion(&ascb->completion); + res = (int) (unsigned long) ascb->uldd_task; + + switch (res) { + case TC_NO_ERROR + 0xFF00: + res = TMF_RESP_FUNC_COMPLETE; + break; + case TF_NAK_RECV + 0xFF00: + res = TMF_RESP_INVALID_FRAME; + break; + case TF_TMF_TASK_DONE + 0xFF00: + res = TMF_RESP_FUNC_FAILED; + break; + case TF_TMF_NO_TAG + 0xFF00: + case TF_TMF_TAG_FREE + 0xFF00: /* the tag is in the free list */ + case TF_TMF_NO_CONN_HANDLE + 0xFF00: /* no such device */ + res = TMF_RESP_FUNC_COMPLETE; + break; + case TF_TMF_NO_CTX + 0xFF00: /* not in seq, or proto != SSP */ + res = TMF_RESP_FUNC_ESUPP; + break; + default: + ASD_DPRINTK("%s: converting result 0x%x to TMF_RESP_FUNC_FAILED\n", + __FUNCTION__, res); + res = TMF_RESP_FUNC_FAILED; + break; + } +out_err: + asd_ascb_free(ascb); + return res; +} + +int asd_abort_task_set(struct domain_device *dev, u8 *lun) +{ + int res = asd_initiate_ssp_tmf(dev, lun, TMF_ABORT_TASK_SET, 0); + + if (res == TMF_RESP_FUNC_COMPLETE) + asd_clear_nexus_I_T_L(dev, lun); + return res; +} + +int asd_clear_aca(struct domain_device *dev, u8 *lun) +{ + int res = asd_initiate_ssp_tmf(dev, lun, TMF_CLEAR_ACA, 0); + + if (res == TMF_RESP_FUNC_COMPLETE) + asd_clear_nexus_I_T_L(dev, lun); + return res; +} + +int asd_clear_task_set(struct domain_device *dev, u8 *lun) +{ + int res = asd_initiate_ssp_tmf(dev, lun, TMF_CLEAR_TASK_SET, 0); + + if (res == TMF_RESP_FUNC_COMPLETE) + asd_clear_nexus_I_T_L(dev, lun); + return res; +} + +int asd_lu_reset(struct domain_device *dev, u8 *lun) +{ + int res = asd_initiate_ssp_tmf(dev, lun, TMF_LU_RESET, 0); + + if (res == TMF_RESP_FUNC_COMPLETE) + asd_clear_nexus_I_T_L(dev, lun); + return res; +} + +/** + * asd_query_task -- send a QUERY TASK TMF to an I_T_L_Q nexus + * task: pointer to sas_task struct of interest + * + * Returns: TMF_RESP_FUNC_COMPLETE if the task is not in the task set, + * or TMF_RESP_FUNC_SUCC if the task is in the task set. + * + * Normally the management layer sets the task to aborted state, + * and then calls query task and then abort task. + */ +int asd_query_task(struct sas_task *task) +{ + struct asd_ascb *ascb = task->lldd_task; + int index; + + if (ascb) { + index = ascb->tc_index; + return asd_initiate_ssp_tmf(task->dev, task->ssp_task.LUN, + TMF_QUERY_TASK, index); + } + return TMF_RESP_FUNC_COMPLETE; +} diff --git a/drivers/scsi/amiga7xx.c b/drivers/scsi/amiga7xx.c index c0844fa32c5..9099d531d5a 100644 --- a/drivers/scsi/amiga7xx.c +++ b/drivers/scsi/amiga7xx.c @@ -11,7 +11,6 @@ #include <linux/mm.h> #include <linux/blkdev.h> #include <linux/sched.h> -#include <linux/config.h> #include <linux/zorro.h> #include <linux/stat.h> diff --git a/drivers/scsi/arcmsr/Makefile b/drivers/scsi/arcmsr/Makefile new file mode 100644 index 00000000000..721aced3916 --- /dev/null +++ b/drivers/scsi/arcmsr/Makefile @@ -0,0 +1,6 @@ +# File: drivers/arcmsr/Makefile +# Makefile for the ARECA PCI-X PCI-EXPRESS SATA RAID controllers SCSI driver. + +arcmsr-objs := arcmsr_attr.o arcmsr_hba.o + +obj-$(CONFIG_SCSI_ARCMSR) := arcmsr.o diff --git a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h new file mode 100644 index 00000000000..aff96db9ccf --- /dev/null +++ b/drivers/scsi/arcmsr/arcmsr.h @@ -0,0 +1,472 @@ +/* +******************************************************************************* +** O.S : Linux +** FILE NAME : arcmsr.h +** BY : Erich Chen +** Description: SCSI RAID Device Driver for +** ARECA RAID Host adapter +******************************************************************************* +** Copyright (C) 2002 - 2005, Areca Technology Corporation All rights reserved. +** +** Web site: www.areca.com.tw +** E-mail: erich@areca.com.tw +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License version 2 as +** published by the Free Software Foundation. +** This program is distributed in the hope that it will be useful, +** but WITHOUT ANY WARRANTY; without even the implied warranty of +** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +** GNU General Public License for more details. +******************************************************************************* +** Redistribution and use in source and binary forms, with or without +** modification, are permitted provided that the following conditions +** are met: +** 1. Redistributions of source code must retain the above copyright +** notice, this list of conditions and the following disclaimer. +** 2. Redistributions in binary form must reproduce the above copyright +** notice, this list of conditions and the following disclaimer in the +** documentation and/or other materials provided with the distribution. +** 3. The name of the author may not be used to endorse or promote products +** derived from this software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR +** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES +** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, +** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT +** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +** DATA, OR PROFITS; OR BUSINESS INTERRUPTION)HOWEVER CAUSED AND ON ANY +** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +**(INCLUDING NEGLIGENCE OR OTHERWISE)ARISING IN ANY WAY OUT OF THE USE OF +** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +******************************************************************************* +*/ +#include <linux/interrupt.h> + +struct class_device_attribute; + +#define ARCMSR_MAX_OUTSTANDING_CMD 256 +#define ARCMSR_MAX_FREECCB_NUM 288 +#define ARCMSR_DRIVER_VERSION "Driver Version 1.20.00.13" +#define ARCMSR_SCSI_INITIATOR_ID 255 +#define ARCMSR_MAX_XFER_SECTORS 512 +#define ARCMSR_MAX_TARGETID 17 +#define ARCMSR_MAX_TARGETLUN 8 +#define ARCMSR_MAX_CMD_PERLUN ARCMSR_MAX_OUTSTANDING_CMD +#define ARCMSR_MAX_QBUFFER 4096 +#define ARCMSR_MAX_SG_ENTRIES 38 + +/* +******************************************************************************* +** split 64bits dma addressing +******************************************************************************* +*/ +#define dma_addr_hi32(addr) (uint32_t) ((addr>>16)>>16) +#define dma_addr_lo32(addr) (uint32_t) (addr & 0xffffffff) +/* +******************************************************************************* +** MESSAGE CONTROL CODE +******************************************************************************* +*/ +struct CMD_MESSAGE +{ + uint32_t HeaderLength; + uint8_t Signature[8]; + uint32_t Timeout; + uint32_t ControlCode; + uint32_t ReturnCode; + uint32_t Length; +}; +/* +******************************************************************************* +** IOP Message Transfer Data for user space +******************************************************************************* +*/ +struct CMD_MESSAGE_FIELD +{ + struct CMD_MESSAGE cmdmessage; + uint8_t messagedatabuffer[1032]; +}; +/* IOP message transfer */ +#define ARCMSR_MESSAGE_FAIL 0x0001 +/* DeviceType */ +#define ARECA_SATA_RAID 0x90000000 +/* FunctionCode */ +#define FUNCTION_READ_RQBUFFER 0x0801 +#define FUNCTION_WRITE_WQBUFFER 0x0802 +#define FUNCTION_CLEAR_RQBUFFER 0x0803 +#define FUNCTION_CLEAR_WQBUFFER 0x0804 +#define FUNCTION_CLEAR_ALLQBUFFER 0x0805 +#define FUNCTION_RETURN_CODE_3F 0x0806 +#define FUNCTION_SAY_HELLO 0x0807 +#define FUNCTION_SAY_GOODBYE 0x0808 +#define FUNCTION_FLUSH_ADAPTER_CACHE 0x0809 +/* ARECA IO CONTROL CODE*/ +#define ARCMSR_MESSAGE_READ_RQBUFFER \ + ARECA_SATA_RAID | FUNCTION_READ_RQBUFFER +#define ARCMSR_MESSAGE_WRITE_WQBUFFER \ + ARECA_SATA_RAID | FUNCTION_WRITE_WQBUFFER +#define ARCMSR_MESSAGE_CLEAR_RQBUFFER \ + ARECA_SATA_RAID | FUNCTION_CLEAR_RQBUFFER +#define ARCMSR_MESSAGE_CLEAR_WQBUFFER \ + ARECA_SATA_RAID | FUNCTION_CLEAR_WQBUFFER +#define ARCMSR_MESSAGE_CLEAR_ALLQBUFFER \ + ARECA_SATA_RAID | FUNCTION_CLEAR_ALLQBUFFER +#define ARCMSR_MESSAGE_RETURN_CODE_3F \ + ARECA_SATA_RAID | FUNCTION_RETURN_CODE_3F +#define ARCMSR_MESSAGE_SAY_HELLO \ + ARECA_SATA_RAID | FUNCTION_SAY_HELLO +#define ARCMSR_MESSAGE_SAY_GOODBYE \ + ARECA_SATA_RAID | FUNCTION_SAY_GOODBYE +#define ARCMSR_MESSAGE_FLUSH_ADAPTER_CACHE \ + ARECA_SATA_RAID | FUNCTION_FLUSH_ADAPTER_CACHE +/* ARECA IOCTL ReturnCode */ +#define ARCMSR_MESSAGE_RETURNCODE_OK 0x00000001 +#define ARCMSR_MESSAGE_RETURNCODE_ERROR 0x00000006 +#define ARCMSR_MESSAGE_RETURNCODE_3F 0x0000003F +/* +************************************************************* +** structure for holding DMA address data +************************************************************* +*/ +#define IS_SG64_ADDR 0x01000000 /* bit24 */ +struct SG32ENTRY +{ + uint32_t length; + uint32_t address; +}; +struct SG64ENTRY +{ + uint32_t length; + uint32_t address; + uint32_t addresshigh; +}; +struct SGENTRY_UNION +{ + union + { + struct SG32ENTRY sg32entry; + struct SG64ENTRY sg64entry; + }u; +}; +/* +******************************************************************** +** Q Buffer of IOP Message Transfer +******************************************************************** +*/ +struct QBUFFER +{ + uint32_t data_len; + uint8_t data[124]; +}; +/* +******************************************************************************* +** FIRMWARE INFO +******************************************************************************* +*/ +struct FIRMWARE_INFO +{ + uint32_t signature; /*0, 00-03*/ + uint32_t request_len; /*1, 04-07*/ + uint32_t numbers_queue; /*2, 08-11*/ + uint32_t sdram_size; /*3, 12-15*/ + uint32_t ide_channels; /*4, 16-19*/ + char vendor[40]; /*5, 20-59*/ + char model[8]; /*15, 60-67*/ + char firmware_ver[16]; /*17, 68-83*/ + char device_map[16]; /*21, 84-99*/ +}; +/* signature of set and get firmware config */ +#define ARCMSR_SIGNATURE_GET_CONFIG 0x87974060 +#define ARCMSR_SIGNATURE_SET_CONFIG 0x87974063 +/* message code of inbound message register */ +#define ARCMSR_INBOUND_MESG0_NOP 0x00000000 +#define ARCMSR_INBOUND_MESG0_GET_CONFIG 0x00000001 +#define ARCMSR_INBOUND_MESG0_SET_CONFIG 0x00000002 +#define ARCMSR_INBOUND_MESG0_ABORT_CMD 0x00000003 +#define ARCMSR_INBOUND_MESG0_STOP_BGRB 0x00000004 +#define ARCMSR_INBOUND_MESG0_FLUSH_CACHE 0x00000005 +#define ARCMSR_INBOUND_MESG0_START_BGRB 0x00000006 +#define ARCMSR_INBOUND_MESG0_CHK331PENDING 0x00000007 +#define ARCMSR_INBOUND_MESG0_SYNC_TIMER 0x00000008 +/* doorbell interrupt generator */ +#define ARCMSR_INBOUND_DRIVER_DATA_WRITE_OK 0x00000001 +#define ARCMSR_INBOUND_DRIVER_DATA_READ_OK 0x00000002 +#define ARCMSR_OUTBOUND_IOP331_DATA_WRITE_OK 0x00000001 +#define ARCMSR_OUTBOUND_IOP331_DATA_READ_OK 0x00000002 +/* ccb areca cdb flag */ +#define ARCMSR_CCBPOST_FLAG_SGL_BSIZE 0x80000000 +#define ARCMSR_CCBPOST_FLAG_IAM_BIOS 0x40000000 +#define ARCMSR_CCBREPLY_FLAG_IAM_BIOS 0x40000000 +#define ARCMSR_CCBREPLY_FLAG_ERROR 0x10000000 +/* outbound firmware ok */ +#define ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK 0x80000000 +/* +******************************************************************************* +** ARECA SCSI COMMAND DESCRIPTOR BLOCK size 0x1F8 (504) +******************************************************************************* +*/ +struct ARCMSR_CDB +{ + uint8_t Bus; + uint8_t TargetID; + uint8_t LUN; + uint8_t Function; + + uint8_t CdbLength; + uint8_t sgcount; + uint8_t Flags; +#define ARCMSR_CDB_FLAG_SGL_BSIZE 0x01 +#define ARCMSR_CDB_FLAG_BIOS 0x02 +#define ARCMSR_CDB_FLAG_WRITE 0x04 +#define ARCMSR_CDB_FLAG_SIMPLEQ 0x00 +#define ARCMSR_CDB_FLAG_HEADQ 0x08 +#define ARCMSR_CDB_FLAG_ORDEREDQ 0x10 + uint8_t Reserved1; + + uint32_t Context; + uint32_t DataLength; + + uint8_t Cdb[16]; + + uint8_t DeviceStatus; +#define ARCMSR_DEV_CHECK_CONDITION 0x02 +#define ARCMSR_DEV_SELECT_TIMEOUT 0xF0 +#define ARCMSR_DEV_ABORTED 0xF1 +#define ARCMSR_DEV_INIT_FAIL 0xF2 + uint8_t SenseData[15]; + + union + { + struct SG32ENTRY sg32entry[ARCMSR_MAX_SG_ENTRIES]; + struct SG64ENTRY sg64entry[ARCMSR_MAX_SG_ENTRIES]; + } u; +}; +/* +******************************************************************************* +** Messaging Unit (MU) of the Intel R 80331 I/O processor (80331) +******************************************************************************* +*/ +struct MessageUnit +{ + uint32_t resrved0[4]; /*0000 000F*/ + uint32_t inbound_msgaddr0; /*0010 0013*/ + uint32_t inbound_msgaddr1; /*0014 0017*/ + uint32_t outbound_msgaddr0; /*0018 001B*/ + uint32_t outbound_msgaddr1; /*001C 001F*/ + uint32_t inbound_doorbell; /*0020 0023*/ + uint32_t inbound_intstatus; /*0024 0027*/ + uint32_t inbound_intmask; /*0028 002B*/ + uint32_t outbound_doorbell; /*002C 002F*/ + uint32_t outbound_intstatus; /*0030 0033*/ + uint32_t outbound_intmask; /*0034 0037*/ + uint32_t reserved1[2]; /*0038 003F*/ + uint32_t inbound_queueport; /*0040 0043*/ + uint32_t outbound_queueport; /*0044 0047*/ + uint32_t reserved2[2]; /*0048 004F*/ + uint32_t reserved3[492]; /*0050 07FF 492*/ + uint32_t reserved4[128]; /*0800 09FF 128*/ + uint32_t message_rwbuffer[256]; /*0a00 0DFF 256*/ + uint32_t message_wbuffer[32]; /*0E00 0E7F 32*/ + uint32_t reserved5[32]; /*0E80 0EFF 32*/ + uint32_t message_rbuffer[32]; /*0F00 0F7F 32*/ + uint32_t reserved6[32]; /*0F80 0FFF 32*/ +}; +/* +******************************************************************************* +** Adapter Control Block +******************************************************************************* +*/ +struct AdapterControlBlock +{ + struct pci_dev * pdev; + struct Scsi_Host * host; + unsigned long vir2phy_offset; + /* Offset is used in making arc cdb physical to virtual calculations */ + uint32_t outbound_int_enable; + + struct MessageUnit __iomem * pmu; + /* message unit ATU inbound base address0 */ + + uint32_t acb_flags; +#define ACB_F_SCSISTOPADAPTER 0x0001 +#define ACB_F_MSG_STOP_BGRB 0x0002 + /* stop RAID background rebuild */ +#define ACB_F_MSG_START_BGRB 0x0004 + /* stop RAID background rebuild */ +#define ACB_F_IOPDATA_OVERFLOW 0x0008 + /* iop message data rqbuffer overflow */ +#define ACB_F_MESSAGE_WQBUFFER_CLEARED 0x0010 + /* message clear wqbuffer */ +#define ACB_F_MESSAGE_RQBUFFER_CLEARED 0x0020 + /* message clear rqbuffer */ +#define ACB_F_MESSAGE_WQBUFFER_READED 0x0040 +#define ACB_F_BUS_RESET 0x0080 +#define ACB_F_IOP_INITED 0x0100 + /* iop init */ + + struct CommandControlBlock * pccb_pool[ARCMSR_MAX_FREECCB_NUM]; + /* used for memory free */ + struct list_head ccb_free_list; + /* head of free ccb list */ + atomic_t ccboutstandingcount; + + void * dma_coherent; + /* dma_coherent used for memory free */ + dma_addr_t dma_coherent_handle; + /* dma_coherent_handle used for memory free */ + + uint8_t rqbuffer[ARCMSR_MAX_QBUFFER]; + /* data collection buffer for read from 80331 */ + int32_t rqbuf_firstindex; + /* first of read buffer */ + int32_t rqbuf_lastindex; + /* last of read buffer */ + uint8_t wqbuffer[ARCMSR_MAX_QBUFFER]; + /* data collection buffer for write to 80331 */ + int32_t wqbuf_firstindex; + /* first of write buffer */ + int32_t wqbuf_lastindex; + /* last of write buffer */ + uint8_t devstate[ARCMSR_MAX_TARGETID][ARCMSR_MAX_TARGETLUN]; + /* id0 ..... id15, lun0...lun7 */ +#define ARECA_RAID_GONE 0x55 +#define ARECA_RAID_GOOD 0xaa + uint32_t num_resets; + uint32_t num_aborts; + uint32_t firm_request_len; + uint32_t firm_numbers_queue; + uint32_t firm_sdram_size; + uint32_t firm_hd_channels; + char firm_model[12]; + char firm_version[20]; +};/* HW_DEVICE_EXTENSION */ +/* +******************************************************************************* +** Command Control Block +** this CCB length must be 32 bytes boundary +******************************************************************************* +*/ +struct CommandControlBlock +{ + struct ARCMSR_CDB arcmsr_cdb; + /* + ** 0-503 (size of CDB=504): + ** arcmsr messenger scsi command descriptor size 504 bytes + */ + uint32_t cdb_shifted_phyaddr; + /* 504-507 */ + uint32_t reserved1; + /* 508-511 */ +#if BITS_PER_LONG == 64 + /* ======================512+64 bytes======================== */ + struct list_head list; + /* 512-527 16 bytes next/prev ptrs for ccb lists */ + struct scsi_cmnd * pcmd; + /* 528-535 8 bytes pointer of linux scsi command */ + struct AdapterControlBlock * acb; + /* 536-543 8 bytes pointer of acb */ + + uint16_t ccb_flags; + /* 544-545 */ + #define CCB_FLAG_READ 0x0000 + #define CCB_FLAG_WRITE 0x0001 + #define CCB_FLAG_ERROR 0x0002 + #define CCB_FLAG_FLUSHCACHE 0x0004 + #define CCB_FLAG_MASTER_ABORTED 0x0008 + uint16_t startdone; + /* 546-547 */ + #define ARCMSR_CCB_DONE 0x0000 + #define ARCMSR_CCB_START 0x55AA + #define ARCMSR_CCB_ABORTED 0xAA55 + #define ARCMSR_CCB_ILLEGAL 0xFFFF + uint32_t reserved2[7]; + /* 548-551 552-555 556-559 560-563 564-567 568-571 572-575 */ +#else + /* ======================512+32 bytes======================== */ + struct list_head list; + /* 512-519 8 bytes next/prev ptrs for ccb lists */ + struct scsi_cmnd * pcmd; + /* 520-523 4 bytes pointer of linux scsi command */ + struct AdapterControlBlock * acb; + /* 524-527 4 bytes pointer of acb */ + + uint16_t ccb_flags; + /* 528-529 */ + #define CCB_FLAG_READ 0x0000 + #define CCB_FLAG_WRITE 0x0001 + #define CCB_FLAG_ERROR 0x0002 + #define CCB_FLAG_FLUSHCACHE 0x0004 + #define CCB_FLAG_MASTER_ABORTED 0x0008 + uint16_t startdone; + /* 530-531 */ + #define ARCMSR_CCB_DONE 0x0000 + #define ARCMSR_CCB_START 0x55AA + #define ARCMSR_CCB_ABORTED 0xAA55 + #define ARCMSR_CCB_ILLEGAL 0xFFFF + uint32_t reserved2[3]; + /* 532-535 536-539 540-543 */ +#endif + /* ========================================================== */ +}; +/* +******************************************************************************* +** ARECA SCSI sense data +******************************************************************************* +*/ +struct SENSE_DATA +{ + uint8_t ErrorCode:7; +#define SCSI_SENSE_CURRENT_ERRORS 0x70 +#define SCSI_SENSE_DEFERRED_ERRORS 0x71 + uint8_t Valid:1; + uint8_t SegmentNumber; + uint8_t SenseKey:4; + uint8_t Reserved:1; + uint8_t IncorrectLength:1; + uint8_t EndOfMedia:1; + uint8_t FileMark:1; + uint8_t Information[4]; + uint8_t AdditionalSenseLength; + uint8_t CommandSpecificInformation[4]; + uint8_t AdditionalSenseCode; + uint8_t AdditionalSenseCodeQualifier; + uint8_t FieldReplaceableUnitCode; + uint8_t SenseKeySpecific[3]; +}; +/* +******************************************************************************* +** Outbound Interrupt Status Register - OISR +******************************************************************************* +*/ +#define ARCMSR_MU_OUTBOUND_INTERRUPT_STATUS_REG 0x30 +#define ARCMSR_MU_OUTBOUND_PCI_INT 0x10 +#define ARCMSR_MU_OUTBOUND_POSTQUEUE_INT 0x08 +#define ARCMSR_MU_OUTBOUND_DOORBELL_INT 0x04 +#define ARCMSR_MU_OUTBOUND_MESSAGE1_INT 0x02 +#define ARCMSR_MU_OUTBOUND_MESSAGE0_INT 0x01 +#define ARCMSR_MU_OUTBOUND_HANDLE_INT \ + (ARCMSR_MU_OUTBOUND_MESSAGE0_INT \ + |ARCMSR_MU_OUTBOUND_MESSAGE1_INT \ + |ARCMSR_MU_OUTBOUND_DOORBELL_INT \ + |ARCMSR_MU_OUTBOUND_POSTQUEUE_INT \ + |ARCMSR_MU_OUTBOUND_PCI_INT) +/* +******************************************************************************* +** Outbound Interrupt Mask Register - OIMR +******************************************************************************* +*/ +#define ARCMSR_MU_OUTBOUND_INTERRUPT_MASK_REG 0x34 +#define ARCMSR_MU_OUTBOUND_PCI_INTMASKENABLE 0x10 +#define ARCMSR_MU_OUTBOUND_POSTQUEUE_INTMASKENABLE 0x08 +#define ARCMSR_MU_OUTBOUND_DOORBELL_INTMASKENABLE 0x04 +#define ARCMSR_MU_OUTBOUND_MESSAGE1_INTMASKENABLE 0x02 +#define ARCMSR_MU_OUTBOUND_MESSAGE0_INTMASKENABLE 0x01 +#define ARCMSR_MU_OUTBOUND_ALL_INTMASKENABLE 0x1F + +extern void arcmsr_post_Qbuffer(struct AdapterControlBlock *acb); +extern struct class_device_attribute *arcmsr_host_attrs[]; +extern int arcmsr_alloc_sysfs_attr(struct AdapterControlBlock *acb); +void arcmsr_free_sysfs_attr(struct AdapterControlBlock *acb); + diff --git a/drivers/scsi/arcmsr/arcmsr_attr.c b/drivers/scsi/arcmsr/arcmsr_attr.c new file mode 100644 index 00000000000..12497da5529 --- /dev/null +++ b/drivers/scsi/arcmsr/arcmsr_attr.c @@ -0,0 +1,381 @@ +/* +******************************************************************************* +** O.S : Linux +** FILE NAME : arcmsr_attr.c +** BY : Erich Chen +** Description: attributes exported to sysfs and device host +******************************************************************************* +** Copyright (C) 2002 - 2005, Areca Technology Corporation All rights reserved +** +** Web site: www.areca.com.tw +** E-mail: erich@areca.com.tw +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License version 2 as +** published by the Free Software Foundation. +** This program is distributed in the hope that it will be useful, +** but WITHOUT ANY WARRANTY; without even the implied warranty of +** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +** GNU General Public License for more details. +******************************************************************************* +** Redistribution and use in source and binary forms, with or without +** modification, are permitted provided that the following conditions +** are met: +** 1. Redistributions of source code must retain the above copyright +** notice, this list of conditions and the following disclaimer. +** 2. Redistributions in binary form must reproduce the above copyright +** notice, this list of conditions and the following disclaimer in the +** documentation and/or other materials provided with the distribution. +** 3. The name of the author may not be used to endorse or promote products +** derived from this software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR +** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES +** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, +** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,BUT +** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +** DATA, OR PROFITS; OR BUSINESS INTERRUPTION)HOWEVER CAUSED AND ON ANY +** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE)ARISING IN ANY WAY OUT OF THE USE OF +** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +******************************************************************************* +** For history of changes, see Documentation/scsi/ChangeLog.arcmsr +** Firmware Specification, see Documentation/scsi/arcmsr_spec.txt +******************************************************************************* +*/ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/pci.h> + +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_transport.h> +#include "arcmsr.h" + +struct class_device_attribute *arcmsr_host_attrs[]; + +static ssize_t +arcmsr_sysfs_iop_message_read(struct kobject *kobj, char *buf, loff_t off, + size_t count) +{ + struct class_device *cdev = container_of(kobj,struct class_device,kobj); + struct Scsi_Host *host = class_to_shost(cdev); + struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata; + struct MessageUnit __iomem *reg = acb->pmu; + uint8_t *pQbuffer,*ptmpQbuffer; + int32_t allxfer_len = 0; + + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + + /* do message unit read. */ + ptmpQbuffer = (uint8_t *)buf; + while ((acb->rqbuf_firstindex != acb->rqbuf_lastindex) + && (allxfer_len < 1031)) { + pQbuffer = &acb->rqbuffer[acb->rqbuf_firstindex]; + memcpy(ptmpQbuffer, pQbuffer, 1); + acb->rqbuf_firstindex++; + acb->rqbuf_firstindex %= ARCMSR_MAX_QBUFFER; + ptmpQbuffer++; + allxfer_len++; + } + if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) { + struct QBUFFER __iomem * prbuffer = (struct QBUFFER __iomem *) + ®->message_rbuffer; + uint8_t __iomem * iop_data = (uint8_t __iomem *)prbuffer->data; + int32_t iop_len; + + acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW; + iop_len = readl(&prbuffer->data_len); + while (iop_len > 0) { + acb->rqbuffer[acb->rqbuf_lastindex] = readb(iop_data); + acb->rqbuf_lastindex++; + acb->rqbuf_lastindex %= ARCMSR_MAX_QBUFFER; + iop_data++; + iop_len--; + } + writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK, + ®->inbound_doorbell); + } + return (allxfer_len); +} + +static ssize_t +arcmsr_sysfs_iop_message_write(struct kobject *kobj, char *buf, loff_t off, + size_t count) +{ + struct class_device *cdev = container_of(kobj,struct class_device,kobj); + struct Scsi_Host *host = class_to_shost(cdev); + struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata; + int32_t my_empty_len, user_len, wqbuf_firstindex, wqbuf_lastindex; + uint8_t *pQbuffer, *ptmpuserbuffer; + + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + if (count > 1032) + return -EINVAL; + /* do message unit write. */ + ptmpuserbuffer = (uint8_t *)buf; + user_len = (int32_t)count; + wqbuf_lastindex = acb->wqbuf_lastindex; + wqbuf_firstindex = acb->wqbuf_firstindex; + if (wqbuf_lastindex != wqbuf_firstindex) { + arcmsr_post_Qbuffer(acb); + return 0; /*need retry*/ + } else { + my_empty_len = (wqbuf_firstindex-wqbuf_lastindex - 1) + &(ARCMSR_MAX_QBUFFER - 1); + if (my_empty_len >= user_len) { + while (user_len > 0) { + pQbuffer = + &acb->wqbuffer[acb->wqbuf_lastindex]; + memcpy(pQbuffer, ptmpuserbuffer, 1); + acb->wqbuf_lastindex++; + acb->wqbuf_lastindex %= ARCMSR_MAX_QBUFFER; + ptmpuserbuffer++; + user_len--; + } + if (acb->acb_flags & ACB_F_MESSAGE_WQBUFFER_CLEARED) { + acb->acb_flags &= + ~ACB_F_MESSAGE_WQBUFFER_CLEARED; + arcmsr_post_Qbuffer(acb); + } + return count; + } else { + return 0; /*need retry*/ + } + } +} + +static ssize_t +arcmsr_sysfs_iop_message_clear(struct kobject *kobj, char *buf, loff_t off, + size_t count) +{ + struct class_device *cdev = container_of(kobj,struct class_device,kobj); + struct Scsi_Host *host = class_to_shost(cdev); + struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata; + struct MessageUnit __iomem *reg = acb->pmu; + uint8_t *pQbuffer; + + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + + if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) { + acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW; + writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK + , ®->inbound_doorbell); + } + acb->acb_flags |= + (ACB_F_MESSAGE_WQBUFFER_CLEARED + | ACB_F_MESSAGE_RQBUFFER_CLEARED + | ACB_F_MESSAGE_WQBUFFER_READED); + acb->rqbuf_firstindex = 0; + acb->rqbuf_lastindex = 0; + acb->wqbuf_firstindex = 0; + acb->wqbuf_lastindex = 0; + pQbuffer = acb->rqbuffer; + memset(pQbuffer, 0, sizeof (struct QBUFFER)); + pQbuffer = acb->wqbuffer; + memset(pQbuffer, 0, sizeof (struct QBUFFER)); + return 1; +} + +static struct bin_attribute arcmsr_sysfs_message_read_attr = { + .attr = { + .name = "mu_read", + .mode = S_IRUSR , + .owner = THIS_MODULE, + }, + .size = 1032, + .read = arcmsr_sysfs_iop_message_read, +}; + +static struct bin_attribute arcmsr_sysfs_message_write_attr = { + .attr = { + .name = "mu_write", + .mode = S_IWUSR, + .owner = THIS_MODULE, + }, + .size = 1032, + .write = arcmsr_sysfs_iop_message_write, +}; + +static struct bin_attribute arcmsr_sysfs_message_clear_attr = { + .attr = { + .name = "mu_clear", + .mode = S_IWUSR, + .owner = THIS_MODULE, + }, + .size = 1, + .write = arcmsr_sysfs_iop_message_clear, +}; + +int arcmsr_alloc_sysfs_attr(struct AdapterControlBlock *acb) +{ + struct Scsi_Host *host = acb->host; + int error; + + error = sysfs_create_bin_file(&host->shost_classdev.kobj, + &arcmsr_sysfs_message_read_attr); + if (error) { + printk(KERN_ERR "arcmsr: alloc sysfs mu_read failed\n"); + goto error_bin_file_message_read; + } + error = sysfs_create_bin_file(&host->shost_classdev.kobj, + &arcmsr_sysfs_message_write_attr); + if (error) { + printk(KERN_ERR "arcmsr: alloc sysfs mu_write failed\n"); + goto error_bin_file_message_write; + } + error = sysfs_create_bin_file(&host->shost_classdev.kobj, + &arcmsr_sysfs_message_clear_attr); + if (error) { + printk(KERN_ERR "arcmsr: alloc sysfs mu_clear failed\n"); + goto error_bin_file_message_clear; + } + return 0; +error_bin_file_message_clear: + sysfs_remove_bin_file(&host->shost_classdev.kobj, + &arcmsr_sysfs_message_write_attr); +error_bin_file_message_write: + sysfs_remove_bin_file(&host->shost_classdev.kobj, + &arcmsr_sysfs_message_read_attr); +error_bin_file_message_read: + return error; +} + +void +arcmsr_free_sysfs_attr(struct AdapterControlBlock *acb) { + struct Scsi_Host *host = acb->host; + + sysfs_remove_bin_file(&host->shost_classdev.kobj, + &arcmsr_sysfs_message_clear_attr); + sysfs_remove_bin_file(&host->shost_classdev.kobj, + &arcmsr_sysfs_message_write_attr); + sysfs_remove_bin_file(&host->shost_classdev.kobj, + &arcmsr_sysfs_message_read_attr); +} + + +static ssize_t +arcmsr_attr_host_driver_version(struct class_device *cdev, char *buf) { + return snprintf(buf, PAGE_SIZE, + "%s\n", + ARCMSR_DRIVER_VERSION); +} + +static ssize_t +arcmsr_attr_host_driver_posted_cmd(struct class_device *cdev, char *buf) { + struct Scsi_Host *host = class_to_shost(cdev); + struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata; + return snprintf(buf, PAGE_SIZE, + "%4d\n", + atomic_read(&acb->ccboutstandingcount)); +} + +static ssize_t +arcmsr_attr_host_driver_reset(struct class_device *cdev, char *buf) { + struct Scsi_Host *host = class_to_shost(cdev); + struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata; + return snprintf(buf, PAGE_SIZE, + "%4d\n", + acb->num_resets); +} + +static ssize_t +arcmsr_attr_host_driver_abort(struct class_device *cdev, char *buf) { + struct Scsi_Host *host = class_to_shost(cdev); + struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata; + return snprintf(buf, PAGE_SIZE, + "%4d\n", + acb->num_aborts); +} + +static ssize_t +arcmsr_attr_host_fw_model(struct class_device *cdev, char *buf) { + struct Scsi_Host *host = class_to_shost(cdev); + struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata; + return snprintf(buf, PAGE_SIZE, + "%s\n", + acb->firm_model); +} + +static ssize_t +arcmsr_attr_host_fw_version(struct class_device *cdev, char *buf) { + struct Scsi_Host *host = class_to_shost(cdev); + struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata; + + return snprintf(buf, PAGE_SIZE, + "%s\n", + acb->firm_version); +} + +static ssize_t +arcmsr_attr_host_fw_request_len(struct class_device *cdev, char *buf) { + struct Scsi_Host *host = class_to_shost(cdev); + struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata; + + return snprintf(buf, PAGE_SIZE, + "%4d\n", + acb->firm_request_len); +} + +static ssize_t +arcmsr_attr_host_fw_numbers_queue(struct class_device *cdev, char *buf) { + struct Scsi_Host *host = class_to_shost(cdev); + struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata; + + return snprintf(buf, PAGE_SIZE, + "%4d\n", + acb->firm_numbers_queue); +} + +static ssize_t +arcmsr_attr_host_fw_sdram_size(struct class_device *cdev, char *buf) { + struct Scsi_Host *host = class_to_shost(cdev); + struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata; + + return snprintf(buf, PAGE_SIZE, + "%4d\n", + acb->firm_sdram_size); +} + +static ssize_t +arcmsr_attr_host_fw_hd_channels(struct class_device *cdev, char *buf) { + struct Scsi_Host *host = class_to_shost(cdev); + struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata; + + return snprintf(buf, PAGE_SIZE, + "%4d\n", + acb->firm_hd_channels); +} + +static CLASS_DEVICE_ATTR(host_driver_version, S_IRUGO, arcmsr_attr_host_driver_version, NULL); +static CLASS_DEVICE_ATTR(host_driver_posted_cmd, S_IRUGO, arcmsr_attr_host_driver_posted_cmd, NULL); +static CLASS_DEVICE_ATTR(host_driver_reset, S_IRUGO, arcmsr_attr_host_driver_reset, NULL); +static CLASS_DEVICE_ATTR(host_driver_abort, S_IRUGO, arcmsr_attr_host_driver_abort, NULL); +static CLASS_DEVICE_ATTR(host_fw_model, S_IRUGO, arcmsr_attr_host_fw_model, NULL); +static CLASS_DEVICE_ATTR(host_fw_version, S_IRUGO, arcmsr_attr_host_fw_version, NULL); +static CLASS_DEVICE_ATTR(host_fw_request_len, S_IRUGO, arcmsr_attr_host_fw_request_len, NULL); +static CLASS_DEVICE_ATTR(host_fw_numbers_queue, S_IRUGO, arcmsr_attr_host_fw_numbers_queue, NULL); +static CLASS_DEVICE_ATTR(host_fw_sdram_size, S_IRUGO, arcmsr_attr_host_fw_sdram_size, NULL); +static CLASS_DEVICE_ATTR(host_fw_hd_channels, S_IRUGO, arcmsr_attr_host_fw_hd_channels, NULL); + +struct class_device_attribute *arcmsr_host_attrs[] = { + &class_device_attr_host_driver_version, + &class_device_attr_host_driver_posted_cmd, + &class_device_attr_host_driver_reset, + &class_device_attr_host_driver_abort, + &class_device_attr_host_fw_model, + &class_device_attr_host_fw_version, + &class_device_attr_host_fw_request_len, + &class_device_attr_host_fw_numbers_queue, + &class_device_attr_host_fw_sdram_size, + &class_device_attr_host_fw_hd_channels, + NULL, +}; diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c new file mode 100644 index 00000000000..475f978ff8f --- /dev/null +++ b/drivers/scsi/arcmsr/arcmsr_hba.c @@ -0,0 +1,1496 @@ +/* +******************************************************************************* +** O.S : Linux +** FILE NAME : arcmsr_hba.c +** BY : Erich Chen +** Description: SCSI RAID Device Driver for +** ARECA RAID Host adapter +******************************************************************************* +** Copyright (C) 2002 - 2005, Areca Technology Corporation All rights reserved +** +** Web site: www.areca.com.tw +** E-mail: erich@areca.com.tw +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License version 2 as +** published by the Free Software Foundation. +** This program is distributed in the hope that it will be useful, +** but WITHOUT ANY WARRANTY; without even the implied warranty of +** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +** GNU General Public License for more details. +******************************************************************************* +** Redistribution and use in source and binary forms, with or without +** modification, are permitted provided that the following conditions +** are met: +** 1. Redistributions of source code must retain the above copyright +** notice, this list of conditions and the following disclaimer. +** 2. Redistributions in binary form must reproduce the above copyright +** notice, this list of conditions and the following disclaimer in the +** documentation and/or other materials provided with the distribution. +** 3. The name of the author may not be used to endorse or promote products +** derived from this software without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR +** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES +** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, +** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,BUT +** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +** DATA, OR PROFITS; OR BUSINESS INTERRUPTION)HOWEVER CAUSED AND ON ANY +** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE)ARISING IN ANY WAY OUT OF THE USE OF +** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +******************************************************************************* +** For history of changes, see Documentation/scsi/ChangeLog.arcmsr +** Firmware Specification, see Documentation/scsi/arcmsr_spec.txt +******************************************************************************* +*/ +#include <linux/module.h> +#include <linux/reboot.h> +#include <linux/spinlock.h> +#include <linux/pci_ids.h> +#include <linux/interrupt.h> +#include <linux/moduleparam.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/timer.h> +#include <linux/pci.h> +#include <asm/dma.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/uaccess.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_tcq.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_transport.h> +#include <scsi/scsicam.h> +#include "arcmsr.h" + +MODULE_AUTHOR("Erich Chen <erich@areca.com.tw>"); +MODULE_DESCRIPTION("ARECA (ARC11xx/12xx) SATA RAID HOST Adapter"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_VERSION(ARCMSR_DRIVER_VERSION); + +static int arcmsr_iop_message_xfer(struct AdapterControlBlock *acb, struct scsi_cmnd *cmd); +static int arcmsr_abort(struct scsi_cmnd *); +static int arcmsr_bus_reset(struct scsi_cmnd *); +static int arcmsr_bios_param(struct scsi_device *sdev, + struct block_device *bdev, sector_t capacity, int *info); +static int arcmsr_queue_command(struct scsi_cmnd * cmd, + void (*done) (struct scsi_cmnd *)); +static int arcmsr_probe(struct pci_dev *pdev, + const struct pci_device_id *id); +static void arcmsr_remove(struct pci_dev *pdev); +static void arcmsr_shutdown(struct pci_dev *pdev); +static void arcmsr_iop_init(struct AdapterControlBlock *acb); +static void arcmsr_free_ccb_pool(struct AdapterControlBlock *acb); +static void arcmsr_stop_adapter_bgrb(struct AdapterControlBlock *acb); +static void arcmsr_flush_adapter_cache(struct AdapterControlBlock *acb); +static uint8_t arcmsr_wait_msgint_ready(struct AdapterControlBlock *acb); +static const char *arcmsr_info(struct Scsi_Host *); +static irqreturn_t arcmsr_interrupt(struct AdapterControlBlock *acb); + +static int arcmsr_adjust_disk_queue_depth(struct scsi_device *sdev, int queue_depth) +{ + if (queue_depth > ARCMSR_MAX_CMD_PERLUN) + queue_depth = ARCMSR_MAX_CMD_PERLUN; + scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, queue_depth); + return queue_depth; +} + +static struct scsi_host_template arcmsr_scsi_host_template = { + .module = THIS_MODULE, + .name = "ARCMSR ARECA SATA RAID HOST Adapter" ARCMSR_DRIVER_VERSION, + .info = arcmsr_info, + .queuecommand = arcmsr_queue_command, + .eh_abort_handler = arcmsr_abort, + .eh_bus_reset_handler = arcmsr_bus_reset, + .bios_param = arcmsr_bios_param, + .change_queue_depth = arcmsr_adjust_disk_queue_depth, + .can_queue = ARCMSR_MAX_OUTSTANDING_CMD, + .this_id = ARCMSR_SCSI_INITIATOR_ID, + .sg_tablesize = ARCMSR_MAX_SG_ENTRIES, + .max_sectors = ARCMSR_MAX_XFER_SECTORS, + .cmd_per_lun = ARCMSR_MAX_CMD_PERLUN, + .use_clustering = ENABLE_CLUSTERING, + .shost_attrs = arcmsr_host_attrs, +}; + +static struct pci_device_id arcmsr_device_id_table[] = { + {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1110)}, + {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1120)}, + {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1130)}, + {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1160)}, + {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1170)}, + {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1210)}, + {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1220)}, + {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1230)}, + {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1260)}, + {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1270)}, + {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1280)}, + {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1380)}, + {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1381)}, + {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1680)}, + {PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1681)}, + {0, 0}, /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(pci, arcmsr_device_id_table); +static struct pci_driver arcmsr_pci_driver = { + .name = "arcmsr", + .id_table = arcmsr_device_id_table, + .probe = arcmsr_probe, + .remove = arcmsr_remove, + .shutdown = arcmsr_shutdown +}; + +static irqreturn_t arcmsr_do_interrupt(int irq, void *dev_id, + struct pt_regs *regs) +{ + irqreturn_t handle_state; + struct AdapterControlBlock *acb; + unsigned long flags; + + acb = (struct AdapterControlBlock *)dev_id; + + spin_lock_irqsave(acb->host->host_lock, flags); + handle_state = arcmsr_interrupt(acb); + spin_unlock_irqrestore(acb->host->host_lock, flags); + return handle_state; +} + +static int arcmsr_bios_param(struct scsi_device *sdev, + struct block_device *bdev, sector_t capacity, int *geom) +{ + int ret, heads, sectors, cylinders, total_capacity; + unsigned char *buffer;/* return copy of block device's partition table */ + + buffer = scsi_bios_ptable(bdev); + if (buffer) { + ret = scsi_partsize(buffer, capacity, &geom[2], &geom[0], &geom[1]); + kfree(buffer); + if (ret != -1) + return ret; + } + total_capacity = capacity; + heads = 64; + sectors = 32; + cylinders = total_capacity / (heads * sectors); + if (cylinders > 1024) { + heads = 255; + sectors = 63; + cylinders = total_capacity / (heads * sectors); + } + geom[0] = heads; + geom[1] = sectors; + geom[2] = cylinders; + return 0; +} + +static int arcmsr_alloc_ccb_pool(struct AdapterControlBlock *acb) +{ + struct pci_dev *pdev = acb->pdev; + struct MessageUnit __iomem *reg = acb->pmu; + u32 ccb_phyaddr_hi32; + void *dma_coherent; + dma_addr_t dma_coherent_handle, dma_addr; + struct CommandControlBlock *ccb_tmp; + int i, j; + + dma_coherent = dma_alloc_coherent(&pdev->dev, + ARCMSR_MAX_FREECCB_NUM * + sizeof (struct CommandControlBlock) + 0x20, + &dma_coherent_handle, GFP_KERNEL); + if (!dma_coherent) + return -ENOMEM; + + acb->dma_coherent = dma_coherent; + acb->dma_coherent_handle = dma_coherent_handle; + + if (((unsigned long)dma_coherent & 0x1F)) { + dma_coherent = dma_coherent + + (0x20 - ((unsigned long)dma_coherent & 0x1F)); + dma_coherent_handle = dma_coherent_handle + + (0x20 - ((unsigned long)dma_coherent_handle & 0x1F)); + } + + dma_addr = dma_coherent_handle; + ccb_tmp = (struct CommandControlBlock *)dma_coherent; + for (i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++) { + ccb_tmp->cdb_shifted_phyaddr = dma_addr >> 5; + ccb_tmp->acb = acb; + acb->pccb_pool[i] = ccb_tmp; + list_add_tail(&ccb_tmp->list, &acb->ccb_free_list); + dma_addr = dma_addr + sizeof (struct CommandControlBlock); + ccb_tmp++; + } + + acb->vir2phy_offset = (unsigned long)ccb_tmp - + (unsigned long)dma_addr; + for (i = 0; i < ARCMSR_MAX_TARGETID; i++) + for (j = 0; j < ARCMSR_MAX_TARGETLUN; j++) + acb->devstate[i][j] = ARECA_RAID_GOOD; + + /* + ** here we need to tell iop 331 our ccb_tmp.HighPart + ** if ccb_tmp.HighPart is not zero + */ + ccb_phyaddr_hi32 = (uint32_t) ((dma_coherent_handle >> 16) >> 16); + if (ccb_phyaddr_hi32 != 0) { + writel(ARCMSR_SIGNATURE_SET_CONFIG, ®->message_rwbuffer[0]); + writel(ccb_phyaddr_hi32, ®->message_rwbuffer[1]); + writel(ARCMSR_INBOUND_MESG0_SET_CONFIG, ®->inbound_msgaddr0); + if (arcmsr_wait_msgint_ready(acb)) + printk(KERN_NOTICE "arcmsr%d: " + "'set ccb high part physical address' timeout\n", + acb->host->host_no); + } + + writel(readl(®->outbound_intmask) | + ARCMSR_MU_OUTBOUND_ALL_INTMASKENABLE, + ®->outbound_intmask); + return 0; +} + +static int arcmsr_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct Scsi_Host *host; + struct AdapterControlBlock *acb; + uint8_t bus, dev_fun; + int error; + + error = pci_enable_device(pdev); + if (error) + goto out; + pci_set_master(pdev); + + host = scsi_host_alloc(&arcmsr_scsi_host_template, + sizeof(struct AdapterControlBlock)); + if (!host) { + error = -ENOMEM; + goto out_disable_device; + } + acb = (struct AdapterControlBlock *)host->hostdata; + memset(acb, 0, sizeof (struct AdapterControlBlock)); + + error = pci_set_dma_mask(pdev, DMA_64BIT_MASK); + if (error) { + error = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (error) { + printk(KERN_WARNING + "scsi%d: No suitable DMA mask available\n", + host->host_no); + goto out_host_put; + } + } + bus = pdev->bus->number; + dev_fun = pdev->devfn; + acb->host = host; + acb->pdev = pdev; + host->max_sectors = ARCMSR_MAX_XFER_SECTORS; + host->max_lun = ARCMSR_MAX_TARGETLUN; + host->max_id = ARCMSR_MAX_TARGETID;/*16:8*/ + host->max_cmd_len = 16; /*this is issue of 64bit LBA, over 2T byte*/ + host->sg_tablesize = ARCMSR_MAX_SG_ENTRIES; + host->can_queue = ARCMSR_MAX_FREECCB_NUM; /* max simultaneous cmds */ + host->cmd_per_lun = ARCMSR_MAX_CMD_PERLUN; + host->this_id = ARCMSR_SCSI_INITIATOR_ID; + host->unique_id = (bus << 8) | dev_fun; + host->irq = pdev->irq; + error = pci_request_regions(pdev, "arcmsr"); + if (error) + goto out_host_put; + + acb->pmu = ioremap(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (!acb->pmu) { + printk(KERN_NOTICE "arcmsr%d: memory" + " mapping region fail \n", acb->host->host_no); + goto out_release_regions; + } + acb->acb_flags |= (ACB_F_MESSAGE_WQBUFFER_CLEARED | + ACB_F_MESSAGE_RQBUFFER_CLEARED | + ACB_F_MESSAGE_WQBUFFER_READED); + acb->acb_flags &= ~ACB_F_SCSISTOPADAPTER; + INIT_LIST_HEAD(&acb->ccb_free_list); + + error = arcmsr_alloc_ccb_pool(acb); + if (error) + goto out_iounmap; + + error = request_irq(pdev->irq, arcmsr_do_interrupt, + SA_INTERRUPT | SA_SHIRQ, "arcmsr", acb); + if (error) + goto out_free_ccb_pool; + + arcmsr_iop_init(acb); + pci_set_drvdata(pdev, host); + + error = scsi_add_host(host, &pdev->dev); + if (error) + goto out_free_irq; + + error = arcmsr_alloc_sysfs_attr(acb); + if (error) + goto out_free_sysfs; + + scsi_scan_host(host); + return 0; + out_free_sysfs: + out_free_irq: + free_irq(pdev->irq, acb); + out_free_ccb_pool: + arcmsr_free_ccb_pool(acb); + out_iounmap: + iounmap(acb->pmu); + out_release_regions: + pci_release_regions(pdev); + out_host_put: + scsi_host_put(host); + out_disable_device: + pci_disable_device(pdev); + out: + return error; +} + +static void arcmsr_abort_allcmd(struct AdapterControlBlock *acb) +{ + struct MessageUnit __iomem *reg = acb->pmu; + + writel(ARCMSR_INBOUND_MESG0_ABORT_CMD, ®->inbound_msgaddr0); + if (arcmsr_wait_msgint_ready(acb)) + printk(KERN_NOTICE + "arcmsr%d: wait 'abort all outstanding command' timeout \n" + , acb->host->host_no); +} + +static void arcmsr_pci_unmap_dma(struct CommandControlBlock *ccb) +{ + struct AdapterControlBlock *acb = ccb->acb; + struct scsi_cmnd *pcmd = ccb->pcmd; + + if (pcmd->use_sg != 0) { + struct scatterlist *sl; + + sl = (struct scatterlist *)pcmd->request_buffer; + pci_unmap_sg(acb->pdev, sl, pcmd->use_sg, pcmd->sc_data_direction); + } + else if (pcmd->request_bufflen != 0) + pci_unmap_single(acb->pdev, + pcmd->SCp.dma_handle, + pcmd->request_bufflen, pcmd->sc_data_direction); +} + +static void arcmsr_ccb_complete(struct CommandControlBlock *ccb, int stand_flag) +{ + struct AdapterControlBlock *acb = ccb->acb; + struct scsi_cmnd *pcmd = ccb->pcmd; + + arcmsr_pci_unmap_dma(ccb); + if (stand_flag == 1) + atomic_dec(&acb->ccboutstandingcount); + ccb->startdone = ARCMSR_CCB_DONE; + ccb->ccb_flags = 0; + list_add_tail(&ccb->list, &acb->ccb_free_list); + pcmd->scsi_done(pcmd); +} + +static void arcmsr_remove(struct pci_dev *pdev) +{ + struct Scsi_Host *host = pci_get_drvdata(pdev); + struct AdapterControlBlock *acb = + (struct AdapterControlBlock *) host->hostdata; + struct MessageUnit __iomem *reg = acb->pmu; + int poll_count = 0; + + arcmsr_free_sysfs_attr(acb); + scsi_remove_host(host); + arcmsr_stop_adapter_bgrb(acb); + arcmsr_flush_adapter_cache(acb); + writel(readl(®->outbound_intmask) | + ARCMSR_MU_OUTBOUND_ALL_INTMASKENABLE, + ®->outbound_intmask); + acb->acb_flags |= ACB_F_SCSISTOPADAPTER; + acb->acb_flags &= ~ACB_F_IOP_INITED; + + for (poll_count = 0; poll_count < 256; poll_count++) { + if (!atomic_read(&acb->ccboutstandingcount)) + break; + arcmsr_interrupt(acb); + msleep(25); + } + + if (atomic_read(&acb->ccboutstandingcount)) { + int i; + + arcmsr_abort_allcmd(acb); + for (i = 0; i < ARCMSR_MAX_OUTSTANDING_CMD; i++) + readl(®->outbound_queueport); + for (i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++) { + struct CommandControlBlock *ccb = acb->pccb_pool[i]; + if (ccb->startdone == ARCMSR_CCB_START) { + ccb->startdone = ARCMSR_CCB_ABORTED; + ccb->pcmd->result = DID_ABORT << 16; + arcmsr_ccb_complete(ccb, 1); + } + } + } + + free_irq(pdev->irq, acb); + iounmap(acb->pmu); + arcmsr_free_ccb_pool(acb); + pci_release_regions(pdev); + + scsi_host_put(host); + + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); +} + +static void arcmsr_shutdown(struct pci_dev *pdev) +{ + struct Scsi_Host *host = pci_get_drvdata(pdev); + struct AdapterControlBlock *acb = + (struct AdapterControlBlock *)host->hostdata; + + arcmsr_stop_adapter_bgrb(acb); + arcmsr_flush_adapter_cache(acb); +} + +static int arcmsr_module_init(void) +{ + int error = 0; + + error = pci_register_driver(&arcmsr_pci_driver); + return error; +} + +static void arcmsr_module_exit(void) +{ + pci_unregister_driver(&arcmsr_pci_driver); +} +module_init(arcmsr_module_init); +module_exit(arcmsr_module_exit); + +static u32 arcmsr_disable_outbound_ints(struct AdapterControlBlock *acb) +{ + struct MessageUnit __iomem *reg = acb->pmu; + u32 orig_mask = readl(®->outbound_intmask); + + writel(orig_mask | ARCMSR_MU_OUTBOUND_ALL_INTMASKENABLE, + ®->outbound_intmask); + return orig_mask; +} + +static void arcmsr_enable_outbound_ints(struct AdapterControlBlock *acb, + u32 orig_mask) +{ + struct MessageUnit __iomem *reg = acb->pmu; + u32 mask; + + mask = orig_mask & ~(ARCMSR_MU_OUTBOUND_POSTQUEUE_INTMASKENABLE | + ARCMSR_MU_OUTBOUND_DOORBELL_INTMASKENABLE); + writel(mask, ®->outbound_intmask); +} + +static void arcmsr_flush_adapter_cache(struct AdapterControlBlock *acb) +{ + struct MessageUnit __iomem *reg=acb->pmu; + + writel(ARCMSR_INBOUND_MESG0_FLUSH_CACHE, ®->inbound_msgaddr0); + if (arcmsr_wait_msgint_ready(acb)) + printk(KERN_NOTICE + "arcmsr%d: wait 'flush adapter cache' timeout \n" + , acb->host->host_no); +} + +static void arcmsr_report_sense_info(struct CommandControlBlock *ccb) +{ + struct scsi_cmnd *pcmd = ccb->pcmd; + struct SENSE_DATA *sensebuffer = (struct SENSE_DATA *)pcmd->sense_buffer; + + pcmd->result = DID_OK << 16; + if (sensebuffer) { + int sense_data_length = + sizeof (struct SENSE_DATA) < sizeof (pcmd->sense_buffer) + ? sizeof (struct SENSE_DATA) : sizeof (pcmd->sense_buffer); + memset(sensebuffer, 0, sizeof (pcmd->sense_buffer)); + memcpy(sensebuffer, ccb->arcmsr_cdb.SenseData, sense_data_length); + sensebuffer->ErrorCode = SCSI_SENSE_CURRENT_ERRORS; + sensebuffer->Valid = 1; + } +} + +static uint8_t arcmsr_wait_msgint_ready(struct AdapterControlBlock *acb) +{ + struct MessageUnit __iomem *reg = acb->pmu; + uint32_t Index; + uint8_t Retries = 0x00; + + do { + for (Index = 0; Index < 100; Index++) { + if (readl(®->outbound_intstatus) + & ARCMSR_MU_OUTBOUND_MESSAGE0_INT) { + writel(ARCMSR_MU_OUTBOUND_MESSAGE0_INT + , ®->outbound_intstatus); + return 0x00; + } + msleep_interruptible(10); + }/*max 1 seconds*/ + } while (Retries++ < 20);/*max 20 sec*/ + return 0xff; +} + +static void arcmsr_build_ccb(struct AdapterControlBlock *acb, + struct CommandControlBlock *ccb, struct scsi_cmnd *pcmd) +{ + struct ARCMSR_CDB *arcmsr_cdb = (struct ARCMSR_CDB *)&ccb->arcmsr_cdb; + int8_t *psge = (int8_t *)&arcmsr_cdb->u; + uint32_t address_lo, address_hi; + int arccdbsize = 0x30; + + ccb->pcmd = pcmd; + memset(arcmsr_cdb, 0, sizeof (struct ARCMSR_CDB)); + arcmsr_cdb->Bus = 0; + arcmsr_cdb->TargetID = pcmd->device->id; + arcmsr_cdb->LUN = pcmd->device->lun; + arcmsr_cdb->Function = 1; + arcmsr_cdb->CdbLength = (uint8_t)pcmd->cmd_len; + arcmsr_cdb->Context = (unsigned long)arcmsr_cdb; + memcpy(arcmsr_cdb->Cdb, pcmd->cmnd, pcmd->cmd_len); + if (pcmd->use_sg) { + int length, sgcount, i, cdb_sgcount = 0; + struct scatterlist *sl; + + /* Get Scatter Gather List from scsiport. */ + sl = (struct scatterlist *) pcmd->request_buffer; + sgcount = pci_map_sg(acb->pdev, sl, pcmd->use_sg, + pcmd->sc_data_direction); + /* map stor port SG list to our iop SG List. */ + for (i = 0; i < sgcount; i++) { + /* Get the physical address of the current data pointer */ + length = cpu_to_le32(sg_dma_len(sl)); + address_lo = cpu_to_le32(dma_addr_lo32(sg_dma_address(sl))); + address_hi = cpu_to_le32(dma_addr_hi32(sg_dma_address(sl))); + if (address_hi == 0) { + struct SG32ENTRY *pdma_sg = (struct SG32ENTRY *)psge; + + pdma_sg->address = address_lo; + pdma_sg->length = length; + psge += sizeof (struct SG32ENTRY); + arccdbsize += sizeof (struct SG32ENTRY); + } else { + struct SG64ENTRY *pdma_sg = (struct SG64ENTRY *)psge; + + pdma_sg->addresshigh = address_hi; + pdma_sg->address = address_lo; + pdma_sg->length = length|IS_SG64_ADDR; + psge += sizeof (struct SG64ENTRY); + arccdbsize += sizeof (struct SG64ENTRY); + } + sl++; + cdb_sgcount++; + } + arcmsr_cdb->sgcount = (uint8_t)cdb_sgcount; + arcmsr_cdb->DataLength = pcmd->request_bufflen; + if ( arccdbsize > 256) + arcmsr_cdb->Flags |= ARCMSR_CDB_FLAG_SGL_BSIZE; + } else if (pcmd->request_bufflen) { + dma_addr_t dma_addr; + dma_addr = pci_map_single(acb->pdev, pcmd->request_buffer, + pcmd->request_bufflen, pcmd->sc_data_direction); + pcmd->SCp.dma_handle = dma_addr; + address_lo = cpu_to_le32(dma_addr_lo32(dma_addr)); + address_hi = cpu_to_le32(dma_addr_hi32(dma_addr)); + if (address_hi == 0) { + struct SG32ENTRY *pdma_sg = (struct SG32ENTRY *)psge; + pdma_sg->address = address_lo; + pdma_sg->length = pcmd->request_bufflen; + } else { + struct SG64ENTRY *pdma_sg = (struct SG64ENTRY *)psge; + pdma_sg->addresshigh = address_hi; + pdma_sg->address = address_lo; + pdma_sg->length = pcmd->request_bufflen|IS_SG64_ADDR; + } + arcmsr_cdb->sgcount = 1; + arcmsr_cdb->DataLength = pcmd->request_bufflen; + } + if (pcmd->sc_data_direction == DMA_TO_DEVICE ) { + arcmsr_cdb->Flags |= ARCMSR_CDB_FLAG_WRITE; + ccb->ccb_flags |= CCB_FLAG_WRITE; + } +} + +static void arcmsr_post_ccb(struct AdapterControlBlock *acb, struct CommandControlBlock *ccb) +{ + struct MessageUnit __iomem *reg = acb->pmu; + uint32_t cdb_shifted_phyaddr = ccb->cdb_shifted_phyaddr; + struct ARCMSR_CDB *arcmsr_cdb = (struct ARCMSR_CDB *)&ccb->arcmsr_cdb; + + atomic_inc(&acb->ccboutstandingcount); + ccb->startdone = ARCMSR_CCB_START; + if (arcmsr_cdb->Flags & ARCMSR_CDB_FLAG_SGL_BSIZE) + writel(cdb_shifted_phyaddr | ARCMSR_CCBPOST_FLAG_SGL_BSIZE, + ®->inbound_queueport); + else + writel(cdb_shifted_phyaddr, ®->inbound_queueport); +} + +void arcmsr_post_Qbuffer(struct AdapterControlBlock *acb) +{ + struct MessageUnit __iomem *reg = acb->pmu; + struct QBUFFER __iomem *pwbuffer = (struct QBUFFER __iomem *) ®->message_wbuffer; + uint8_t __iomem *iop_data = (uint8_t __iomem *) pwbuffer->data; + int32_t allxfer_len = 0; + + if (acb->acb_flags & ACB_F_MESSAGE_WQBUFFER_READED) { + acb->acb_flags &= (~ACB_F_MESSAGE_WQBUFFER_READED); + while ((acb->wqbuf_firstindex != acb->wqbuf_lastindex) + && (allxfer_len < 124)) { + writeb(acb->wqbuffer[acb->wqbuf_firstindex], iop_data); + acb->wqbuf_firstindex++; + acb->wqbuf_firstindex %= ARCMSR_MAX_QBUFFER; + iop_data++; + allxfer_len++; + } + writel(allxfer_len, &pwbuffer->data_len); + writel(ARCMSR_INBOUND_DRIVER_DATA_WRITE_OK + , ®->inbound_doorbell); + } +} + +static void arcmsr_stop_adapter_bgrb(struct AdapterControlBlock *acb) +{ + struct MessageUnit __iomem *reg = acb->pmu; + + acb->acb_flags &= ~ACB_F_MSG_START_BGRB; + writel(ARCMSR_INBOUND_MESG0_STOP_BGRB, ®->inbound_msgaddr0); + if (arcmsr_wait_msgint_ready(acb)) + printk(KERN_NOTICE + "arcmsr%d: wait 'stop adapter background rebulid' timeout \n" + , acb->host->host_no); +} + +static void arcmsr_free_ccb_pool(struct AdapterControlBlock *acb) +{ + dma_free_coherent(&acb->pdev->dev, + ARCMSR_MAX_FREECCB_NUM * sizeof (struct CommandControlBlock) + 0x20, + acb->dma_coherent, + acb->dma_coherent_handle); +} + +static irqreturn_t arcmsr_interrupt(struct AdapterControlBlock *acb) +{ + struct MessageUnit __iomem *reg = acb->pmu; + struct CommandControlBlock *ccb; + uint32_t flag_ccb, outbound_intstatus, outbound_doorbell; + + outbound_intstatus = readl(®->outbound_intstatus) + & acb->outbound_int_enable; + writel(outbound_intstatus, ®->outbound_intstatus); + if (outbound_intstatus & ARCMSR_MU_OUTBOUND_DOORBELL_INT) { + outbound_doorbell = readl(®->outbound_doorbell); + writel(outbound_doorbell, ®->outbound_doorbell); + if (outbound_doorbell & ARCMSR_OUTBOUND_IOP331_DATA_WRITE_OK) { + struct QBUFFER __iomem * prbuffer = + (struct QBUFFER __iomem *) ®->message_rbuffer; + uint8_t __iomem * iop_data = (uint8_t __iomem *)prbuffer->data; + int32_t my_empty_len, iop_len, rqbuf_firstindex, rqbuf_lastindex; + + rqbuf_lastindex = acb->rqbuf_lastindex; + rqbuf_firstindex = acb->rqbuf_firstindex; + iop_len = readl(&prbuffer->data_len); + my_empty_len = (rqbuf_firstindex - rqbuf_lastindex - 1) + &(ARCMSR_MAX_QBUFFER - 1); + if (my_empty_len >= iop_len) { + while (iop_len > 0) { + acb->rqbuffer[acb->rqbuf_lastindex] = readb(iop_data); + acb->rqbuf_lastindex++; + acb->rqbuf_lastindex %= ARCMSR_MAX_QBUFFER; + iop_data++; + iop_len--; + } + writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK, + ®->inbound_doorbell); + } else + acb->acb_flags |= ACB_F_IOPDATA_OVERFLOW; + } + if (outbound_doorbell & ARCMSR_OUTBOUND_IOP331_DATA_READ_OK) { + acb->acb_flags |= ACB_F_MESSAGE_WQBUFFER_READED; + if (acb->wqbuf_firstindex != acb->wqbuf_lastindex) { + struct QBUFFER __iomem * pwbuffer = + (struct QBUFFER __iomem *) ®->message_wbuffer; + uint8_t __iomem * iop_data = (uint8_t __iomem *) pwbuffer->data; + int32_t allxfer_len = 0; + + acb->acb_flags &= (~ACB_F_MESSAGE_WQBUFFER_READED); + while ((acb->wqbuf_firstindex != acb->wqbuf_lastindex) + && (allxfer_len < 124)) { + writeb(acb->wqbuffer[acb->wqbuf_firstindex], iop_data); + acb->wqbuf_firstindex++; + acb->wqbuf_firstindex %= ARCMSR_MAX_QBUFFER; + iop_data++; + allxfer_len++; + } + writel(allxfer_len, &pwbuffer->data_len); + writel(ARCMSR_INBOUND_DRIVER_DATA_WRITE_OK, + ®->inbound_doorbell); + } + if (acb->wqbuf_firstindex == acb->wqbuf_lastindex) + acb->acb_flags |= ACB_F_MESSAGE_WQBUFFER_CLEARED; + } + } + if (outbound_intstatus & ARCMSR_MU_OUTBOUND_POSTQUEUE_INT) { + int id, lun; + /* + **************************************************************** + ** areca cdb command done + **************************************************************** + */ + while (1) { + if ((flag_ccb = readl(®->outbound_queueport)) == 0xFFFFFFFF) + break;/*chip FIFO no ccb for completion already*/ + /* check if command done with no error*/ + ccb = (struct CommandControlBlock *)(acb->vir2phy_offset + + (flag_ccb << 5)); + if ((ccb->acb != acb) || (ccb->startdone != ARCMSR_CCB_START)) { + if (ccb->startdone == ARCMSR_CCB_ABORTED) { + struct scsi_cmnd *abortcmd=ccb->pcmd; + if (abortcmd) { + abortcmd->result |= DID_ABORT >> 16; + arcmsr_ccb_complete(ccb, 1); + printk(KERN_NOTICE + "arcmsr%d: ccb='0x%p' isr got aborted command \n" + , acb->host->host_no, ccb); + } + continue; + } + printk(KERN_NOTICE + "arcmsr%d: isr get an illegal ccb command done acb='0x%p'" + "ccb='0x%p' ccbacb='0x%p' startdone = 0x%x" + " ccboutstandingcount=%d \n" + , acb->host->host_no + , acb + , ccb + , ccb->acb + , ccb->startdone + , atomic_read(&acb->ccboutstandingcount)); + continue; + } + id = ccb->pcmd->device->id; + lun = ccb->pcmd->device->lun; + if (!(flag_ccb & ARCMSR_CCBREPLY_FLAG_ERROR)) { + if (acb->devstate[id][lun] == ARECA_RAID_GONE) + acb->devstate[id][lun] = ARECA_RAID_GOOD; + ccb->pcmd->result = DID_OK << 16; + arcmsr_ccb_complete(ccb, 1); + } else { + switch(ccb->arcmsr_cdb.DeviceStatus) { + case ARCMSR_DEV_SELECT_TIMEOUT: { + acb->devstate[id][lun] = ARECA_RAID_GONE; + ccb->pcmd->result = DID_TIME_OUT << 16; + arcmsr_ccb_complete(ccb, 1); + } + break; + case ARCMSR_DEV_ABORTED: + case ARCMSR_DEV_INIT_FAIL: { + acb->devstate[id][lun] = ARECA_RAID_GONE; + ccb->pcmd->result = DID_BAD_TARGET << 16; + arcmsr_ccb_complete(ccb, 1); + } + break; + case ARCMSR_DEV_CHECK_CONDITION: { + acb->devstate[id][lun] = ARECA_RAID_GOOD; + arcmsr_report_sense_info(ccb); + arcmsr_ccb_complete(ccb, 1); + } + break; + default: + printk(KERN_NOTICE + "arcmsr%d: scsi id=%d lun=%d" + " isr get command error done," + "but got unknown DeviceStatus = 0x%x \n" + , acb->host->host_no + , id + , lun + , ccb->arcmsr_cdb.DeviceStatus); + acb->devstate[id][lun] = ARECA_RAID_GONE; + ccb->pcmd->result = DID_NO_CONNECT << 16; + arcmsr_ccb_complete(ccb, 1); + break; + } + } + }/*drain reply FIFO*/ + } + if (!(outbound_intstatus & ARCMSR_MU_OUTBOUND_HANDLE_INT)) + return IRQ_NONE; + return IRQ_HANDLED; +} + +static void arcmsr_iop_parking(struct AdapterControlBlock *acb) +{ + if (acb) { + /* stop adapter background rebuild */ + if (acb->acb_flags & ACB_F_MSG_START_BGRB) { + acb->acb_flags &= ~ACB_F_MSG_START_BGRB; + arcmsr_stop_adapter_bgrb(acb); + arcmsr_flush_adapter_cache(acb); + } + } +} + +static int arcmsr_iop_message_xfer(struct AdapterControlBlock *acb, struct scsi_cmnd *cmd) +{ + struct MessageUnit __iomem *reg = acb->pmu; + struct CMD_MESSAGE_FIELD *pcmdmessagefld; + int retvalue = 0, transfer_len = 0; + char *buffer; + uint32_t controlcode = (uint32_t ) cmd->cmnd[5] << 24 | + (uint32_t ) cmd->cmnd[6] << 16 | + (uint32_t ) cmd->cmnd[7] << 8 | + (uint32_t ) cmd->cmnd[8]; + /* 4 bytes: Areca io control code */ + if (cmd->use_sg) { + struct scatterlist *sg = (struct scatterlist *)cmd->request_buffer; + + buffer = kmap_atomic(sg->page, KM_IRQ0) + sg->offset; + if (cmd->use_sg > 1) { + retvalue = ARCMSR_MESSAGE_FAIL; + goto message_out; + } + transfer_len += sg->length; + } else { + buffer = cmd->request_buffer; + transfer_len = cmd->request_bufflen; + } + if (transfer_len > sizeof(struct CMD_MESSAGE_FIELD)) { + retvalue = ARCMSR_MESSAGE_FAIL; + goto message_out; + } + pcmdmessagefld = (struct CMD_MESSAGE_FIELD *) buffer; + switch(controlcode) { + case ARCMSR_MESSAGE_READ_RQBUFFER: { + unsigned long *ver_addr; + dma_addr_t buf_handle; + uint8_t *pQbuffer, *ptmpQbuffer; + int32_t allxfer_len = 0; + + ver_addr = pci_alloc_consistent(acb->pdev, 1032, &buf_handle); + if (!ver_addr) { + retvalue = ARCMSR_MESSAGE_FAIL; + goto message_out; + } + ptmpQbuffer = (uint8_t *) ver_addr; + while ((acb->rqbuf_firstindex != acb->rqbuf_lastindex) + && (allxfer_len < 1031)) { + pQbuffer = &acb->rqbuffer[acb->rqbuf_firstindex]; + memcpy(ptmpQbuffer, pQbuffer, 1); + acb->rqbuf_firstindex++; + acb->rqbuf_firstindex %= ARCMSR_MAX_QBUFFER; + ptmpQbuffer++; + allxfer_len++; + } + if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) { + struct QBUFFER __iomem * prbuffer = (struct QBUFFER __iomem *) + ®->message_rbuffer; + uint8_t __iomem * iop_data = (uint8_t __iomem *)prbuffer->data; + int32_t iop_len; + + acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW; + iop_len = readl(&prbuffer->data_len); + while (iop_len > 0) { + acb->rqbuffer[acb->rqbuf_lastindex] = readb(iop_data); + acb->rqbuf_lastindex++; + acb->rqbuf_lastindex %= ARCMSR_MAX_QBUFFER; + iop_data++; + iop_len--; + } + writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK, + ®->inbound_doorbell); + } + memcpy(pcmdmessagefld->messagedatabuffer, + (uint8_t *)ver_addr, allxfer_len); + pcmdmessagefld->cmdmessage.Length = allxfer_len; + pcmdmessagefld->cmdmessage.ReturnCode = ARCMSR_MESSAGE_RETURNCODE_OK; + pci_free_consistent(acb->pdev, 1032, ver_addr, buf_handle); + } + break; + case ARCMSR_MESSAGE_WRITE_WQBUFFER: { + unsigned long *ver_addr; + dma_addr_t buf_handle; + int32_t my_empty_len, user_len, wqbuf_firstindex, wqbuf_lastindex; + uint8_t *pQbuffer, *ptmpuserbuffer; + + ver_addr = pci_alloc_consistent(acb->pdev, 1032, &buf_handle); + if (!ver_addr) { + retvalue = ARCMSR_MESSAGE_FAIL; + goto message_out; + } + ptmpuserbuffer = (uint8_t *)ver_addr; + user_len = pcmdmessagefld->cmdmessage.Length; + memcpy(ptmpuserbuffer, pcmdmessagefld->messagedatabuffer, user_len); + wqbuf_lastindex = acb->wqbuf_lastindex; + wqbuf_firstindex = acb->wqbuf_firstindex; + if (wqbuf_lastindex != wqbuf_firstindex) { + struct SENSE_DATA *sensebuffer = + (struct SENSE_DATA *)cmd->sense_buffer; + arcmsr_post_Qbuffer(acb); + /* has error report sensedata */ + sensebuffer->ErrorCode = 0x70; + sensebuffer->SenseKey = ILLEGAL_REQUEST; + sensebuffer->AdditionalSenseLength = 0x0A; + sensebuffer->AdditionalSenseCode = 0x20; + sensebuffer->Valid = 1; + retvalue = ARCMSR_MESSAGE_FAIL; + } else { + my_empty_len = (wqbuf_firstindex-wqbuf_lastindex - 1) + &(ARCMSR_MAX_QBUFFER - 1); + if (my_empty_len >= user_len) { + while (user_len > 0) { + pQbuffer = + &acb->wqbuffer[acb->wqbuf_lastindex]; + memcpy(pQbuffer, ptmpuserbuffer, 1); + acb->wqbuf_lastindex++; + acb->wqbuf_lastindex %= ARCMSR_MAX_QBUFFER; + ptmpuserbuffer++; + user_len--; + } + if (acb->acb_flags & ACB_F_MESSAGE_WQBUFFER_CLEARED) { + acb->acb_flags &= + ~ACB_F_MESSAGE_WQBUFFER_CLEARED; + arcmsr_post_Qbuffer(acb); + } + } else { + /* has error report sensedata */ + struct SENSE_DATA *sensebuffer = + (struct SENSE_DATA *)cmd->sense_buffer; + sensebuffer->ErrorCode = 0x70; + sensebuffer->SenseKey = ILLEGAL_REQUEST; + sensebuffer->AdditionalSenseLength = 0x0A; + sensebuffer->AdditionalSenseCode = 0x20; + sensebuffer->Valid = 1; + retvalue = ARCMSR_MESSAGE_FAIL; + } + } + pci_free_consistent(acb->pdev, 1032, ver_addr, buf_handle); + } + break; + case ARCMSR_MESSAGE_CLEAR_RQBUFFER: { + uint8_t *pQbuffer = acb->rqbuffer; + + if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) { + acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW; + writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK, + ®->inbound_doorbell); + } + acb->acb_flags |= ACB_F_MESSAGE_RQBUFFER_CLEARED; + acb->rqbuf_firstindex = 0; + acb->rqbuf_lastindex = 0; + memset(pQbuffer, 0, ARCMSR_MAX_QBUFFER); + pcmdmessagefld->cmdmessage.ReturnCode = + ARCMSR_MESSAGE_RETURNCODE_OK; + } + break; + case ARCMSR_MESSAGE_CLEAR_WQBUFFER: { + uint8_t *pQbuffer = acb->wqbuffer; + + if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) { + acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW; + writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK + , ®->inbound_doorbell); + } + acb->acb_flags |= + (ACB_F_MESSAGE_WQBUFFER_CLEARED | + ACB_F_MESSAGE_WQBUFFER_READED); + acb->wqbuf_firstindex = 0; + acb->wqbuf_lastindex = 0; + memset(pQbuffer, 0, ARCMSR_MAX_QBUFFER); + pcmdmessagefld->cmdmessage.ReturnCode = + ARCMSR_MESSAGE_RETURNCODE_OK; + } + break; + case ARCMSR_MESSAGE_CLEAR_ALLQBUFFER: { + uint8_t *pQbuffer; + + if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) { + acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW; + writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK + , ®->inbound_doorbell); + } + acb->acb_flags |= + (ACB_F_MESSAGE_WQBUFFER_CLEARED + | ACB_F_MESSAGE_RQBUFFER_CLEARED + | ACB_F_MESSAGE_WQBUFFER_READED); + acb->rqbuf_firstindex = 0; + acb->rqbuf_lastindex = 0; + acb->wqbuf_firstindex = 0; + acb->wqbuf_lastindex = 0; + pQbuffer = acb->rqbuffer; + memset(pQbuffer, 0, sizeof (struct QBUFFER)); + pQbuffer = acb->wqbuffer; + memset(pQbuffer, 0, sizeof (struct QBUFFER)); + pcmdmessagefld->cmdmessage.ReturnCode = ARCMSR_MESSAGE_RETURNCODE_OK; + } + break; + case ARCMSR_MESSAGE_RETURN_CODE_3F: { + pcmdmessagefld->cmdmessage.ReturnCode = ARCMSR_MESSAGE_RETURNCODE_3F; + } + break; + case ARCMSR_MESSAGE_SAY_HELLO: { + int8_t * hello_string = "Hello! I am ARCMSR"; + + memcpy(pcmdmessagefld->messagedatabuffer, hello_string + , (int16_t)strlen(hello_string)); + pcmdmessagefld->cmdmessage.ReturnCode = ARCMSR_MESSAGE_RETURNCODE_OK; + } + break; + case ARCMSR_MESSAGE_SAY_GOODBYE: + arcmsr_iop_parking(acb); + break; + case ARCMSR_MESSAGE_FLUSH_ADAPTER_CACHE: + arcmsr_flush_adapter_cache(acb); + break; + default: + retvalue = ARCMSR_MESSAGE_FAIL; + } + message_out: + if (cmd->use_sg) { + struct scatterlist *sg; + + sg = (struct scatterlist *) cmd->request_buffer; + kunmap_atomic(buffer - sg->offset, KM_IRQ0); + } + return retvalue; +} + +static struct CommandControlBlock *arcmsr_get_freeccb(struct AdapterControlBlock *acb) +{ + struct list_head *head = &acb->ccb_free_list; + struct CommandControlBlock *ccb = NULL; + + if (!list_empty(head)) { + ccb = list_entry(head->next, struct CommandControlBlock, list); + list_del(head->next); + } + return ccb; +} + +static void arcmsr_handle_virtual_command(struct AdapterControlBlock *acb, + struct scsi_cmnd *cmd) +{ + switch (cmd->cmnd[0]) { + case INQUIRY: { + unsigned char inqdata[36]; + char *buffer; + + if (cmd->device->lun) { + cmd->result = (DID_TIME_OUT << 16); + cmd->scsi_done(cmd); + return; + } + inqdata[0] = TYPE_PROCESSOR; + /* Periph Qualifier & Periph Dev Type */ + inqdata[1] = 0; + /* rem media bit & Dev Type Modifier */ + inqdata[2] = 0; + /* ISO,ECMA,& ANSI versions */ + inqdata[4] = 31; + /* length of additional data */ + strncpy(&inqdata[8], "Areca ", 8); + /* Vendor Identification */ + strncpy(&inqdata[16], "RAID controller ", 16); + /* Product Identification */ + strncpy(&inqdata[32], "R001", 4); /* Product Revision */ + if (cmd->use_sg) { + struct scatterlist *sg; + + sg = (struct scatterlist *) cmd->request_buffer; + buffer = kmap_atomic(sg->page, KM_IRQ0) + sg->offset; + } else { + buffer = cmd->request_buffer; + } + memcpy(buffer, inqdata, sizeof(inqdata)); + if (cmd->use_sg) { + struct scatterlist *sg; + + sg = (struct scatterlist *) cmd->request_buffer; + kunmap_atomic(buffer - sg->offset, KM_IRQ0); + } + cmd->scsi_done(cmd); + } + break; + case WRITE_BUFFER: + case READ_BUFFER: { + if (arcmsr_iop_message_xfer(acb, cmd)) + cmd->result = (DID_ERROR << 16); + cmd->scsi_done(cmd); + } + break; + default: + cmd->scsi_done(cmd); + } +} + +static int arcmsr_queue_command(struct scsi_cmnd *cmd, + void (* done)(struct scsi_cmnd *)) +{ + struct Scsi_Host *host = cmd->device->host; + struct AdapterControlBlock *acb = + (struct AdapterControlBlock *) host->hostdata; + struct CommandControlBlock *ccb; + int target = cmd->device->id; + int lun = cmd->device->lun; + + cmd->scsi_done = done; + cmd->host_scribble = NULL; + cmd->result = 0; + if (acb->acb_flags & ACB_F_BUS_RESET) { + printk(KERN_NOTICE "arcmsr%d: bus reset" + " and return busy \n" + , acb->host->host_no); + return SCSI_MLQUEUE_HOST_BUSY; + } + if(target == 16) { + /* virtual device for iop message transfer */ + arcmsr_handle_virtual_command(acb, cmd); + return 0; + } + if (acb->devstate[target][lun] == ARECA_RAID_GONE) { + uint8_t block_cmd; + + block_cmd = cmd->cmnd[0] & 0x0f; + if (block_cmd == 0x08 || block_cmd == 0x0a) { + printk(KERN_NOTICE + "arcmsr%d: block 'read/write'" + "command with gone raid volume" + " Cmd=%2x, TargetId=%d, Lun=%d \n" + , acb->host->host_no + , cmd->cmnd[0] + , target, lun); + cmd->result = (DID_NO_CONNECT << 16); + cmd->scsi_done(cmd); + return 0; + } + } + if (atomic_read(&acb->ccboutstandingcount) >= + ARCMSR_MAX_OUTSTANDING_CMD) + return SCSI_MLQUEUE_HOST_BUSY; + + ccb = arcmsr_get_freeccb(acb); + if (!ccb) + return SCSI_MLQUEUE_HOST_BUSY; + arcmsr_build_ccb(acb, ccb, cmd); + arcmsr_post_ccb(acb, ccb); + return 0; +} + +static void arcmsr_get_firmware_spec(struct AdapterControlBlock *acb) +{ + struct MessageUnit __iomem *reg = acb->pmu; + char *acb_firm_model = acb->firm_model; + char *acb_firm_version = acb->firm_version; + char __iomem *iop_firm_model = (char __iomem *) ®->message_rwbuffer[15]; + char __iomem *iop_firm_version = (char __iomem *) ®->message_rwbuffer[17]; + int count; + + writel(ARCMSR_INBOUND_MESG0_GET_CONFIG, ®->inbound_msgaddr0); + if (arcmsr_wait_msgint_ready(acb)) + printk(KERN_NOTICE + "arcmsr%d: wait " + "'get adapter firmware miscellaneous data' timeout \n" + , acb->host->host_no); + count = 8; + while (count) { + *acb_firm_model = readb(iop_firm_model); + acb_firm_model++; + iop_firm_model++; + count--; + } + count = 16; + while (count) { + *acb_firm_version = readb(iop_firm_version); + acb_firm_version++; + iop_firm_version++; + count--; + } + printk(KERN_INFO + "ARECA RAID ADAPTER%d: FIRMWARE VERSION %s \n" + , acb->host->host_no + , acb->firm_version); + acb->firm_request_len = readl(®->message_rwbuffer[1]); + acb->firm_numbers_queue = readl(®->message_rwbuffer[2]); + acb->firm_sdram_size = readl(®->message_rwbuffer[3]); + acb->firm_hd_channels = readl(®->message_rwbuffer[4]); +} + +static void arcmsr_polling_ccbdone(struct AdapterControlBlock *acb, + struct CommandControlBlock *poll_ccb) +{ + struct MessageUnit __iomem *reg = acb->pmu; + struct CommandControlBlock *ccb; + uint32_t flag_ccb, outbound_intstatus, poll_ccb_done = 0, poll_count = 0; + int id, lun; + + polling_ccb_retry: + poll_count++; + outbound_intstatus = readl(®->outbound_intstatus) + & acb->outbound_int_enable; + writel(outbound_intstatus, ®->outbound_intstatus);/*clear interrupt*/ + while (1) { + if ((flag_ccb = readl(®->outbound_queueport)) == 0xFFFFFFFF) { + if (poll_ccb_done) + break; + else { + msleep(25); + if (poll_count > 100) + break; + goto polling_ccb_retry; + } + } + ccb = (struct CommandControlBlock *) + (acb->vir2phy_offset + (flag_ccb << 5)); + if ((ccb->acb != acb) || + (ccb->startdone != ARCMSR_CCB_START)) { + if ((ccb->startdone == ARCMSR_CCB_ABORTED) || + (ccb == poll_ccb)) { + printk(KERN_NOTICE + "arcmsr%d: scsi id=%d lun=%d ccb='0x%p'" + " poll command abort successfully \n" + , acb->host->host_no + , ccb->pcmd->device->id + , ccb->pcmd->device->lun + , ccb); + ccb->pcmd->result = DID_ABORT << 16; + arcmsr_ccb_complete(ccb, 1); + poll_ccb_done = 1; + continue; + } + printk(KERN_NOTICE + "arcmsr%d: polling get an illegal ccb" + " command done ccb='0x%p'" + "ccboutstandingcount=%d \n" + , acb->host->host_no + , ccb + , atomic_read(&acb->ccboutstandingcount)); + continue; + } + id = ccb->pcmd->device->id; + lun = ccb->pcmd->device->lun; + if (!(flag_ccb & ARCMSR_CCBREPLY_FLAG_ERROR)) { + if (acb->devstate[id][lun] == ARECA_RAID_GONE) + acb->devstate[id][lun] = ARECA_RAID_GOOD; + ccb->pcmd->result = DID_OK << 16; + arcmsr_ccb_complete(ccb, 1); + } else { + switch(ccb->arcmsr_cdb.DeviceStatus) { + case ARCMSR_DEV_SELECT_TIMEOUT: { + acb->devstate[id][lun] = ARECA_RAID_GONE; + ccb->pcmd->result = DID_TIME_OUT << 16; + arcmsr_ccb_complete(ccb, 1); + } + break; + case ARCMSR_DEV_ABORTED: + case ARCMSR_DEV_INIT_FAIL: { + acb->devstate[id][lun] = ARECA_RAID_GONE; + ccb->pcmd->result = DID_BAD_TARGET << 16; + arcmsr_ccb_complete(ccb, 1); + } + break; + case ARCMSR_DEV_CHECK_CONDITION: { + acb->devstate[id][lun] = ARECA_RAID_GOOD; + arcmsr_report_sense_info(ccb); + arcmsr_ccb_complete(ccb, 1); + } + break; + default: + printk(KERN_NOTICE + "arcmsr%d: scsi id=%d lun=%d" + " polling and getting command error done" + "but got unknown DeviceStatus = 0x%x \n" + , acb->host->host_no + , id + , lun + , ccb->arcmsr_cdb.DeviceStatus); + acb->devstate[id][lun] = ARECA_RAID_GONE; + ccb->pcmd->result = DID_BAD_TARGET << 16; + arcmsr_ccb_complete(ccb, 1); + break; + } + } + } +} + +static void arcmsr_iop_init(struct AdapterControlBlock *acb) +{ + struct MessageUnit __iomem *reg = acb->pmu; + uint32_t intmask_org, mask, outbound_doorbell, firmware_state = 0; + + do { + firmware_state = readl(®->outbound_msgaddr1); + } while (!(firmware_state & ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK)); + intmask_org = readl(®->outbound_intmask) + | ARCMSR_MU_OUTBOUND_MESSAGE0_INTMASKENABLE; + arcmsr_get_firmware_spec(acb); + + acb->acb_flags |= ACB_F_MSG_START_BGRB; + writel(ARCMSR_INBOUND_MESG0_START_BGRB, ®->inbound_msgaddr0); + if (arcmsr_wait_msgint_ready(acb)) { + printk(KERN_NOTICE "arcmsr%d: " + "wait 'start adapter background rebulid' timeout\n", + acb->host->host_no); + } + + outbound_doorbell = readl(®->outbound_doorbell); + writel(outbound_doorbell, ®->outbound_doorbell); + writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK, ®->inbound_doorbell); + mask = ~(ARCMSR_MU_OUTBOUND_POSTQUEUE_INTMASKENABLE + | ARCMSR_MU_OUTBOUND_DOORBELL_INTMASKENABLE); + writel(intmask_org & mask, ®->outbound_intmask); + acb->outbound_int_enable = ~(intmask_org & mask) & 0x000000ff; + acb->acb_flags |= ACB_F_IOP_INITED; +} + +static void arcmsr_iop_reset(struct AdapterControlBlock *acb) +{ + struct MessageUnit __iomem *reg = acb->pmu; + struct CommandControlBlock *ccb; + uint32_t intmask_org; + int i = 0; + + if (atomic_read(&acb->ccboutstandingcount) != 0) { + /* talk to iop 331 outstanding command aborted */ + arcmsr_abort_allcmd(acb); + /* wait for 3 sec for all command aborted*/ + msleep_interruptible(3000); + /* disable all outbound interrupt */ + intmask_org = arcmsr_disable_outbound_ints(acb); + /* clear all outbound posted Q */ + for (i = 0; i < ARCMSR_MAX_OUTSTANDING_CMD; i++) + readl(®->outbound_queueport); + for (i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++) { + ccb = acb->pccb_pool[i]; + if ((ccb->startdone == ARCMSR_CCB_START) || + (ccb->startdone == ARCMSR_CCB_ABORTED)) { + ccb->startdone = ARCMSR_CCB_ABORTED; + ccb->pcmd->result = DID_ABORT << 16; + arcmsr_ccb_complete(ccb, 1); + } + } + /* enable all outbound interrupt */ + arcmsr_enable_outbound_ints(acb, intmask_org); + } + atomic_set(&acb->ccboutstandingcount, 0); +} + +static int arcmsr_bus_reset(struct scsi_cmnd *cmd) +{ + struct AdapterControlBlock *acb = + (struct AdapterControlBlock *)cmd->device->host->hostdata; + int i; + + acb->num_resets++; + acb->acb_flags |= ACB_F_BUS_RESET; + for (i = 0; i < 400; i++) { + if (!atomic_read(&acb->ccboutstandingcount)) + break; + arcmsr_interrupt(acb); + msleep(25); + } + arcmsr_iop_reset(acb); + acb->acb_flags &= ~ACB_F_BUS_RESET; + return SUCCESS; +} + +static void arcmsr_abort_one_cmd(struct AdapterControlBlock *acb, + struct CommandControlBlock *ccb) +{ + u32 intmask; + + ccb->startdone = ARCMSR_CCB_ABORTED; + + /* + ** Wait for 3 sec for all command done. + */ + msleep_interruptible(3000); + + intmask = arcmsr_disable_outbound_ints(acb); + arcmsr_polling_ccbdone(acb, ccb); + arcmsr_enable_outbound_ints(acb, intmask); +} + +static int arcmsr_abort(struct scsi_cmnd *cmd) +{ + struct AdapterControlBlock *acb = + (struct AdapterControlBlock *)cmd->device->host->hostdata; + int i = 0; + + printk(KERN_NOTICE + "arcmsr%d: abort device command of scsi id=%d lun=%d \n", + acb->host->host_no, cmd->device->id, cmd->device->lun); + acb->num_aborts++; + + /* + ************************************************ + ** the all interrupt service routine is locked + ** we need to handle it as soon as possible and exit + ************************************************ + */ + if (!atomic_read(&acb->ccboutstandingcount)) + return SUCCESS; + + for (i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++) { + struct CommandControlBlock *ccb = acb->pccb_pool[i]; + if (ccb->startdone == ARCMSR_CCB_START && ccb->pcmd == cmd) { + arcmsr_abort_one_cmd(acb, ccb); + break; + } + } + + return SUCCESS; +} + +static const char *arcmsr_info(struct Scsi_Host *host) +{ + struct AdapterControlBlock *acb = + (struct AdapterControlBlock *) host->hostdata; + static char buf[256]; + char *type; + int raid6 = 1; + + switch (acb->pdev->device) { + case PCI_DEVICE_ID_ARECA_1110: + case PCI_DEVICE_ID_ARECA_1210: + raid6 = 0; + /*FALLTHRU*/ + case PCI_DEVICE_ID_ARECA_1120: + case PCI_DEVICE_ID_ARECA_1130: + case PCI_DEVICE_ID_ARECA_1160: + case PCI_DEVICE_ID_ARECA_1170: + case PCI_DEVICE_ID_ARECA_1220: + case PCI_DEVICE_ID_ARECA_1230: + case PCI_DEVICE_ID_ARECA_1260: + case PCI_DEVICE_ID_ARECA_1270: + case PCI_DEVICE_ID_ARECA_1280: + type = "SATA"; + break; + case PCI_DEVICE_ID_ARECA_1380: + case PCI_DEVICE_ID_ARECA_1381: + case PCI_DEVICE_ID_ARECA_1680: + case PCI_DEVICE_ID_ARECA_1681: + type = "SAS"; + break; + default: + type = "X-TYPE"; + break; + } + sprintf(buf, "Areca %s Host Adapter RAID Controller%s\n %s", + type, raid6 ? "( RAID6 capable)" : "", + ARCMSR_DRIVER_VERSION); + return buf; +} + + diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig index 06d7601cdf5..d006a8cb4a7 100644 --- a/drivers/scsi/arm/Kconfig +++ b/drivers/scsi/arm/Kconfig @@ -69,6 +69,7 @@ comment "The following drivers are not fully supported" config SCSI_CUMANA_1 tristate "CumanaSCSI I support (EXPERIMENTAL)" depends on ARCH_ACORN && EXPERIMENTAL && SCSI + select SCSI_SPI_ATTRS help This enables support for the Cumana SCSI I card. If you have an Acorn system with one of these, say Y. If unsure, say N. @@ -76,6 +77,7 @@ config SCSI_CUMANA_1 config SCSI_ECOSCSI tristate "EcoScsi support (EXPERIMENTAL)" depends on ARCH_ACORN && EXPERIMENTAL && (ARCH_ARC || ARCH_A5K) && SCSI + select SCSI_SPI_ATTRS help This enables support for the EcoSCSI card -- a small card that sits in the Econet socket. If you have an Acorn system with one of these, @@ -84,6 +86,7 @@ config SCSI_ECOSCSI config SCSI_OAK1 tristate "Oak SCSI support (EXPERIMENTAL)" depends on ARCH_ACORN && EXPERIMENTAL && SCSI + select SCSI_SPI_ATTRS help This enables support for the Oak SCSI card. If you have an Acorn system with one of these, say Y. If unsure, say N. diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c index dda5a5f79c5..7621e3fa37b 100644 --- a/drivers/scsi/arm/acornscsi.c +++ b/drivers/scsi/arm/acornscsi.c @@ -129,7 +129,6 @@ #define STRx(x) STRINGIFY(x) #define NO_WRITE_STR STRx(NO_WRITE) -#include <linux/config.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/sched.h> @@ -3031,7 +3030,7 @@ acornscsi_probe(struct expansion_card *ec, const struct ecard_id *id) if (!request_region(host->io_port, 2048, "acornscsi(ram)")) goto err_5; - ret = request_irq(host->irq, acornscsi_intr, SA_INTERRUPT, "acornscsi", ashost); + ret = request_irq(host->irq, acornscsi_intr, IRQF_DISABLED, "acornscsi", ashost); if (ret) { printk(KERN_CRIT "scsi%d: IRQ%d not free: %d\n", host->host_no, ashost->scsi.irq, ret); diff --git a/drivers/scsi/arm/cumana_1.c b/drivers/scsi/arm/cumana_1.c index e6c9491dc5c..3bdfc36481a 100644 --- a/drivers/scsi/arm/cumana_1.c +++ b/drivers/scsi/arm/cumana_1.c @@ -277,7 +277,7 @@ cumanascsi1_probe(struct expansion_card *ec, const struct ecard_id *id) ((struct NCR5380_hostdata *)host->hostdata)->ctrl = 0; outb(0x00, host->io_port - 577); - ret = request_irq(host->irq, cumanascsi_intr, SA_INTERRUPT, + ret = request_irq(host->irq, cumanascsi_intr, IRQF_DISABLED, "CumanaSCSI-1", host); if (ret) { printk("scsi%d: IRQ%d not free: %d\n", diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c index fad2109268b..719af0dcc0e 100644 --- a/drivers/scsi/arm/cumana_2.c +++ b/drivers/scsi/arm/cumana_2.c @@ -460,7 +460,7 @@ cumanascsi2_probe(struct expansion_card *ec, const struct ecard_id *id) goto out_free; ret = request_irq(ec->irq, cumanascsi_2_intr, - SA_INTERRUPT, "cumanascsi2", info); + IRQF_DISABLED, "cumanascsi2", info); if (ret) { printk("scsi%d: IRQ%d not free: %d\n", host->host_no, ec->irq, ret); diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c index 3e1053f111d..4cf7afc31cc 100644 --- a/drivers/scsi/arm/fas216.c +++ b/drivers/scsi/arm/fas216.c @@ -2427,7 +2427,7 @@ int fas216_eh_abort(Scsi_Cmnd *SCpnt) info->stats.aborts += 1; printk(KERN_WARNING "scsi%d: abort command ", info->host->host_no); - __scsi_print_command(SCpnt->data_cmnd); + __scsi_print_command(SCpnt->cmnd); print_debug_list(); fas216_dumpstate(info); diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c index 3d69f6c45a6..b2c346a4705 100644 --- a/drivers/scsi/arm/powertec.c +++ b/drivers/scsi/arm/powertec.c @@ -373,7 +373,7 @@ powertecscsi_probe(struct expansion_card *ec, const struct ecard_id *id) goto out_free; ret = request_irq(ec->irq, powertecscsi_intr, - SA_INTERRUPT, "powertec", info); + IRQF_DISABLED, "powertec", info); if (ret) { printk("scsi%d: IRQ%d not free: %d\n", host->host_no, ec->irq, ret); diff --git a/drivers/scsi/arm/scsi.h b/drivers/scsi/arm/scsi.h index 6dd544a5eb5..8c2600ffc6a 100644 --- a/drivers/scsi/arm/scsi.h +++ b/drivers/scsi/arm/scsi.h @@ -74,7 +74,7 @@ static inline void init_SCp(Scsi_Cmnd *SCpnt) unsigned long len = 0; int buf; - SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->buffer; + SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->request_buffer; SCpnt->SCp.buffers_residual = SCpnt->use_sg - 1; SCpnt->SCp.ptr = (char *) (page_address(SCpnt->SCp.buffer->page) + diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c deleted file mode 100644 index 521b718763f..00000000000 --- a/drivers/scsi/ata_piix.c +++ /dev/null @@ -1,904 +0,0 @@ -/* - * ata_piix.c - Intel PATA/SATA controllers - * - * Maintained by: Jeff Garzik <jgarzik@pobox.com> - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * - * Copyright 2003-2005 Red Hat Inc - * Copyright 2003-2005 Jeff Garzik - * - * - * Copyright header from piix.c: - * - * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer - * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat Inc <alan@redhat.com> - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available at http://developer.intel.com/ - * - * Documentation - * Publically available from Intel web site. Errata documentation - * is also publically available. As an aide to anyone hacking on this - * driver the list of errata that are relevant is below.going back to - * PIIX4. Older device documentation is now a bit tricky to find. - * - * The chipsets all follow very much the same design. The orginal Triton - * series chipsets do _not_ support independant device timings, but this - * is fixed in Triton II. With the odd mobile exception the chips then - * change little except in gaining more modes until SATA arrives. This - * driver supports only the chips with independant timing (that is those - * with SITRE and the 0x44 timing register). See pata_oldpiix and pata_mpiix - * for the early chip drivers. - * - * Errata of note: - * - * Unfixable - * PIIX4 errata #9 - Only on ultra obscure hw - * ICH3 errata #13 - Not observed to affect real hw - * by Intel - * - * Things we must deal with - * PIIX4 errata #10 - BM IDE hang with non UDMA - * (must stop/start dma to recover) - * 440MX errata #15 - As PIIX4 errata #10 - * PIIX4 errata #15 - Must not read control registers - * during a PIO transfer - * 440MX errata #13 - As PIIX4 errata #15 - * ICH2 errata #21 - DMA mode 0 doesn't work right - * ICH0/1 errata #55 - As ICH2 errata #21 - * ICH2 spec c #9 - Extra operations needed to handle - * drive hotswap [NOT YET SUPPORTED] - * ICH2 spec c #20 - IDE PRD must not cross a 64K boundary - * and must be dword aligned - * ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3 - * - * Should have been BIOS fixed: - * 450NX: errata #19 - DMA hangs on old 450NX - * 450NX: errata #20 - DMA hangs on old 450NX - * 450NX: errata #25 - Corruption with DMA on old 450NX - * ICH3 errata #15 - IDE deadlock under high load - * (BIOS must set dev 31 fn 0 bit 23) - * ICH3 errata #18 - Don't use native mode - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/blkdev.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <scsi/scsi_host.h> -#include <linux/libata.h> - -#define DRV_NAME "ata_piix" -#define DRV_VERSION "1.10" - -enum { - PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ - ICH5_PMR = 0x90, /* port mapping register */ - ICH5_PCS = 0x92, /* port control and status */ - PIIX_SCC = 0x0A, /* sub-class code register */ - - PIIX_FLAG_IGNORE_PCS = (1 << 25), /* ignore PCS present bits */ - PIIX_FLAG_SCR = (1 << 26), /* SCR available */ - PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */ - PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */ - PIIX_FLAG_COMBINED = (1 << 29), /* combined mode possible */ - /* ICH6/7 use different scheme for map value */ - PIIX_FLAG_COMBINED_ICH6 = PIIX_FLAG_COMBINED | (1 << 30), - - /* combined mode. if set, PATA is channel 0. - * if clear, PATA is channel 1. - */ - PIIX_PORT_ENABLED = (1 << 0), - PIIX_PORT_PRESENT = (1 << 4), - - PIIX_80C_PRI = (1 << 5) | (1 << 4), - PIIX_80C_SEC = (1 << 7) | (1 << 6), - - /* controller IDs */ - piix4_pata = 0, - ich5_pata = 1, - ich5_sata = 2, - esb_sata = 3, - ich6_sata = 4, - ich6_sata_ahci = 5, - ich6m_sata_ahci = 6, - - /* constants for mapping table */ - P0 = 0, /* port 0 */ - P1 = 1, /* port 1 */ - P2 = 2, /* port 2 */ - P3 = 3, /* port 3 */ - IDE = -1, /* IDE */ - NA = -2, /* not avaliable */ - RV = -3, /* reserved */ - - PIIX_AHCI_DEVICE = 6, -}; - -struct piix_map_db { - const u32 mask; - const int map[][4]; -}; - -static int piix_init_one (struct pci_dev *pdev, - const struct pci_device_id *ent); -static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); -static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); -static void piix_pata_error_handler(struct ata_port *ap); -static void piix_sata_error_handler(struct ata_port *ap); - -static unsigned int in_module_init = 1; - -static const struct pci_device_id piix_pci_tbl[] = { -#ifdef ATA_ENABLE_PATA - { 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix4_pata }, - { 0x8086, 0x24db, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, - { 0x8086, 0x25a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, - { 0x8086, 0x27df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, -#endif - - /* NOTE: The following PCI ids must be kept in sync with the - * list in drivers/pci/quirks.c. - */ - - /* 82801EB (ICH5) */ - { 0x8086, 0x24d1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, - /* 82801EB (ICH5) */ - { 0x8086, 0x24df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, - /* 6300ESB (ICH5 variant with broken PCS present bits) */ - { 0x8086, 0x25a3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, esb_sata }, - /* 6300ESB pretending RAID */ - { 0x8086, 0x25b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, esb_sata }, - /* 82801FB/FW (ICH6/ICH6W) */ - { 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata }, - /* 82801FR/FRW (ICH6R/ICH6RW) */ - { 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, - /* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented) */ - { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci }, - /* 82801GB/GR/GH (ICH7, identical to ICH6) */ - { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, - /* 2801GBM/GHM (ICH7M, identical to ICH6M) */ - { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci }, - /* Enterprise Southbridge 2 (where's the datasheet?) */ - { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, - /* SATA Controller 1 IDE (ICH8, no datasheet yet) */ - { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, - /* SATA Controller 2 IDE (ICH8, ditto) */ - { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, - /* Mobile SATA Controller IDE (ICH8M, ditto) */ - { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci }, - - { } /* terminate list */ -}; - -static struct pci_driver piix_pci_driver = { - .name = DRV_NAME, - .id_table = piix_pci_tbl, - .probe = piix_init_one, - .remove = ata_pci_remove_one, - .suspend = ata_pci_device_suspend, - .resume = ata_pci_device_resume, -}; - -static struct scsi_host_template piix_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -}; - -static const struct ata_port_operations piix_pata_ops = { - .port_disable = ata_port_disable, - .set_piomode = piix_set_piomode, - .set_dmamode = piix_set_dmamode, - .mode_filter = ata_pci_default_filter, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = piix_pata_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop, -}; - -static const struct ata_port_operations piix_sata_ops = { - .port_disable = ata_port_disable, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = piix_sata_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop, -}; - -static struct piix_map_db ich5_map_db = { - .mask = 0x7, - .map = { - /* PM PS SM SS MAP */ - { P0, NA, P1, NA }, /* 000b */ - { P1, NA, P0, NA }, /* 001b */ - { RV, RV, RV, RV }, - { RV, RV, RV, RV }, - { P0, P1, IDE, IDE }, /* 100b */ - { P1, P0, IDE, IDE }, /* 101b */ - { IDE, IDE, P0, P1 }, /* 110b */ - { IDE, IDE, P1, P0 }, /* 111b */ - }, -}; - -static struct piix_map_db ich6_map_db = { - .mask = 0x3, - .map = { - /* PM PS SM SS MAP */ - { P0, P2, P1, P3 }, /* 00b */ - { IDE, IDE, P1, P3 }, /* 01b */ - { P0, P2, IDE, IDE }, /* 10b */ - { RV, RV, RV, RV }, - }, -}; - -static struct piix_map_db ich6m_map_db = { - .mask = 0x3, - .map = { - /* PM PS SM SS MAP */ - { P0, P2, RV, RV }, /* 00b */ - { RV, RV, RV, RV }, - { P0, P2, IDE, IDE }, /* 10b */ - { RV, RV, RV, RV }, - }, -}; - -static struct ata_port_info piix_port_info[] = { - /* piix4_pata */ - { - .sht = &piix_sht, - .host_flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ -#if 0 - .mwdma_mask = 0x06, /* mwdma1-2 */ -#else - .mwdma_mask = 0x00, /* mwdma broken */ -#endif - .udma_mask = ATA_UDMA_MASK_40C, - .port_ops = &piix_pata_ops, - }, - - /* ich5_pata */ - { - .sht = &piix_sht, - .host_flags = ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR, - .pio_mask = 0x1f, /* pio0-4 */ -#if 0 - .mwdma_mask = 0x06, /* mwdma1-2 */ -#else - .mwdma_mask = 0x00, /* mwdma broken */ -#endif - .udma_mask = 0x3f, /* udma0-5 */ - .port_ops = &piix_pata_ops, - }, - - /* ich5_sata */ - { - .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED | - PIIX_FLAG_CHECKINTR, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &piix_sata_ops, - .private_data = &ich5_map_db, - }, - - /* i6300esb_sata */ - { - .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED | - PIIX_FLAG_CHECKINTR | PIIX_FLAG_IGNORE_PCS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &piix_sata_ops, - .private_data = &ich5_map_db, - }, - - /* ich6_sata */ - { - .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | - PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &piix_sata_ops, - .private_data = &ich6_map_db, - }, - - /* ich6_sata_ahci */ - { - .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | - PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | - PIIX_FLAG_AHCI, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &piix_sata_ops, - .private_data = &ich6_map_db, - }, - - /* ich6m_sata_ahci */ - { - .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | - PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | - PIIX_FLAG_AHCI, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &piix_sata_ops, - .private_data = &ich6m_map_db, - }, -}; - -static struct pci_bits piix_enable_bits[] = { - { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */ - { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */ -}; - -MODULE_AUTHOR("Andre Hedrick, Alan Cox, Andrzej Krzysztofowicz, Jeff Garzik"); -MODULE_DESCRIPTION("SCSI low-level driver for Intel PIIX/ICH ATA controllers"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, piix_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -/** - * piix_pata_cbl_detect - Probe host controller cable detect info - * @ap: Port for which cable detect info is desired - * - * Read 80c cable indicator from ATA PCI device's PCI config - * register. This register is normally set by firmware (BIOS). - * - * LOCKING: - * None (inherited from caller). - */ -static void piix_pata_cbl_detect(struct ata_port *ap) -{ - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - u8 tmp, mask; - - /* no 80c support in host controller? */ - if ((ap->udma_mask & ~ATA_UDMA_MASK_40C) == 0) - goto cbl40; - - /* check BIOS cable detect results */ - mask = ap->hard_port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC; - pci_read_config_byte(pdev, PIIX_IOCFG, &tmp); - if ((tmp & mask) == 0) - goto cbl40; - - ap->cbl = ATA_CBL_PATA80; - return; - -cbl40: - ap->cbl = ATA_CBL_PATA40; - ap->udma_mask &= ATA_UDMA_MASK_40C; -} - -/** - * piix_pata_prereset - prereset for PATA host controller - * @ap: Target port - * - * Prereset including cable detection. - * - * LOCKING: - * None (inherited from caller). - */ -static int piix_pata_prereset(struct ata_port *ap) -{ - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - - if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) { - ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n"); - ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; - return 0; - } - - piix_pata_cbl_detect(ap); - - return ata_std_prereset(ap); -} - -static void piix_pata_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, piix_pata_prereset, ata_std_softreset, NULL, - ata_std_postreset); -} - -/** - * piix_sata_prereset - prereset for SATA host controller - * @ap: Target port - * - * Reads and configures SATA PCI device's PCI config register - * Port Configuration and Status (PCS) to determine port and - * device availability. Return -ENODEV to skip reset if no - * device is present. - * - * LOCKING: - * None (inherited from caller). - * - * RETURNS: - * 0 if device is present, -ENODEV otherwise. - */ -static int piix_sata_prereset(struct ata_port *ap) -{ - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - const unsigned int *map = ap->host_set->private_data; - int base = 2 * ap->hard_port_no; - unsigned int present_mask = 0; - int port, i; - u8 pcs; - - pci_read_config_byte(pdev, ICH5_PCS, &pcs); - DPRINTK("ata%u: ENTER, pcs=0x%x base=%d\n", ap->id, pcs, base); - - /* enable all ports on this ap and wait for them to settle */ - for (i = 0; i < 2; i++) { - port = map[base + i]; - if (port >= 0) - pcs |= 1 << port; - } - - pci_write_config_byte(pdev, ICH5_PCS, pcs); - msleep(100); - - /* let's see which devices are present */ - pci_read_config_byte(pdev, ICH5_PCS, &pcs); - - for (i = 0; i < 2; i++) { - port = map[base + i]; - if (port < 0) - continue; - if (ap->flags & PIIX_FLAG_IGNORE_PCS || pcs & 1 << (4 + port)) - present_mask |= 1 << i; - else - pcs &= ~(1 << port); - } - - /* disable offline ports on non-AHCI controllers */ - if (!(ap->flags & PIIX_FLAG_AHCI)) - pci_write_config_byte(pdev, ICH5_PCS, pcs); - - DPRINTK("ata%u: LEAVE, pcs=0x%x present_mask=0x%x\n", - ap->id, pcs, present_mask); - - if (!present_mask) { - ata_port_printk(ap, KERN_INFO, "SATA port has no device.\n"); - ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; - return 0; - } - - return ata_std_prereset(ap); -} - -static void piix_sata_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, piix_sata_prereset, ata_std_softreset, NULL, - ata_std_postreset); -} - -/** - * piix_set_piomode - Initialize host controller PATA PIO timings - * @ap: Port whose timings we are configuring - * @adev: um - * - * Set PIO mode for device, in host controller PCI config space. - * - * LOCKING: - * None (inherited from caller). - */ - -static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev) -{ - unsigned int pio = adev->pio_mode - XFER_PIO_0; - struct pci_dev *dev = to_pci_dev(ap->host_set->dev); - unsigned int is_slave = (adev->devno != 0); - unsigned int master_port= ap->hard_port_no ? 0x42 : 0x40; - unsigned int slave_port = 0x44; - u16 master_data; - u8 slave_data; - - static const /* ISP RTC */ - u8 timings[][2] = { { 0, 0 }, - { 0, 0 }, - { 1, 0 }, - { 2, 1 }, - { 2, 3 }, }; - - pci_read_config_word(dev, master_port, &master_data); - if (is_slave) { - master_data |= 0x4000; - /* enable PPE, IE and TIME */ - master_data |= 0x0070; - pci_read_config_byte(dev, slave_port, &slave_data); - slave_data &= (ap->hard_port_no ? 0x0f : 0xf0); - slave_data |= - (timings[pio][0] << 2) | - (timings[pio][1] << (ap->hard_port_no ? 4 : 0)); - } else { - master_data &= 0xccf8; - /* enable PPE, IE and TIME */ - master_data |= 0x0007; - master_data |= - (timings[pio][0] << 12) | - (timings[pio][1] << 8); - } - pci_write_config_word(dev, master_port, master_data); - if (is_slave) - pci_write_config_byte(dev, slave_port, slave_data); -} - -/** - * piix_set_dmamode - Initialize host controller PATA PIO timings - * @ap: Port whose timings we are configuring - * @adev: um - * @udma: udma mode, 0 - 6 - * - * Set UDMA mode for device, in host controller PCI config space. - * - * LOCKING: - * None (inherited from caller). - */ - -static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev) -{ - unsigned int udma = adev->dma_mode; /* FIXME: MWDMA too */ - struct pci_dev *dev = to_pci_dev(ap->host_set->dev); - u8 maslave = ap->hard_port_no ? 0x42 : 0x40; - u8 speed = udma; - unsigned int drive_dn = (ap->hard_port_no ? 2 : 0) + adev->devno; - int a_speed = 3 << (drive_dn * 4); - int u_flag = 1 << drive_dn; - int v_flag = 0x01 << drive_dn; - int w_flag = 0x10 << drive_dn; - int u_speed = 0; - int sitre; - u16 reg4042, reg4a; - u8 reg48, reg54, reg55; - - pci_read_config_word(dev, maslave, ®4042); - DPRINTK("reg4042 = 0x%04x\n", reg4042); - sitre = (reg4042 & 0x4000) ? 1 : 0; - pci_read_config_byte(dev, 0x48, ®48); - pci_read_config_word(dev, 0x4a, ®4a); - pci_read_config_byte(dev, 0x54, ®54); - pci_read_config_byte(dev, 0x55, ®55); - - switch(speed) { - case XFER_UDMA_4: - case XFER_UDMA_2: u_speed = 2 << (drive_dn * 4); break; - case XFER_UDMA_6: - case XFER_UDMA_5: - case XFER_UDMA_3: - case XFER_UDMA_1: u_speed = 1 << (drive_dn * 4); break; - case XFER_UDMA_0: u_speed = 0 << (drive_dn * 4); break; - case XFER_MW_DMA_2: - case XFER_MW_DMA_1: break; - default: - BUG(); - return; - } - - if (speed >= XFER_UDMA_0) { - if (!(reg48 & u_flag)) - pci_write_config_byte(dev, 0x48, reg48 | u_flag); - if (speed == XFER_UDMA_5) { - pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag); - } else { - pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); - } - if ((reg4a & a_speed) != u_speed) - pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed); - if (speed > XFER_UDMA_2) { - if (!(reg54 & v_flag)) - pci_write_config_byte(dev, 0x54, reg54 | v_flag); - } else - pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); - } else { - if (reg48 & u_flag) - pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); - if (reg4a & a_speed) - pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); - if (reg54 & v_flag) - pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); - if (reg55 & w_flag) - pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); - } -} - -#define AHCI_PCI_BAR 5 -#define AHCI_GLOBAL_CTL 0x04 -#define AHCI_ENABLE (1 << 31) -static int piix_disable_ahci(struct pci_dev *pdev) -{ - void __iomem *mmio; - u32 tmp; - int rc = 0; - - /* BUG: pci_enable_device has not yet been called. This - * works because this device is usually set up by BIOS. - */ - - if (!pci_resource_start(pdev, AHCI_PCI_BAR) || - !pci_resource_len(pdev, AHCI_PCI_BAR)) - return 0; - - mmio = pci_iomap(pdev, AHCI_PCI_BAR, 64); - if (!mmio) - return -ENOMEM; - - tmp = readl(mmio + AHCI_GLOBAL_CTL); - if (tmp & AHCI_ENABLE) { - tmp &= ~AHCI_ENABLE; - writel(tmp, mmio + AHCI_GLOBAL_CTL); - - tmp = readl(mmio + AHCI_GLOBAL_CTL); - if (tmp & AHCI_ENABLE) - rc = -EIO; - } - - pci_iounmap(pdev, mmio); - return rc; -} - -/** - * piix_check_450nx_errata - Check for problem 450NX setup - * @ata_dev: the PCI device to check - * - * Check for the present of 450NX errata #19 and errata #25. If - * they are found return an error code so we can turn off DMA - */ - -static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev) -{ - struct pci_dev *pdev = NULL; - u16 cfg; - u8 rev; - int no_piix_dma = 0; - - while((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL) - { - /* Look for 450NX PXB. Check for problem configurations - A PCI quirk checks bit 6 already */ - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); - pci_read_config_word(pdev, 0x41, &cfg); - /* Only on the original revision: IDE DMA can hang */ - if (rev == 0x00) - no_piix_dma = 1; - /* On all revisions below 5 PXB bus lock must be disabled for IDE */ - else if (cfg & (1<<14) && rev < 5) - no_piix_dma = 2; - } - if (no_piix_dma) - dev_printk(KERN_WARNING, &ata_dev->dev, "450NX errata present, disabling IDE DMA.\n"); - if (no_piix_dma == 2) - dev_printk(KERN_WARNING, &ata_dev->dev, "A BIOS update may resolve this.\n"); - return no_piix_dma; -} - -static void __devinit piix_init_sata_map(struct pci_dev *pdev, - struct ata_port_info *pinfo) -{ - struct piix_map_db *map_db = pinfo[0].private_data; - const unsigned int *map; - int i, invalid_map = 0; - u8 map_value; - - pci_read_config_byte(pdev, ICH5_PMR, &map_value); - - map = map_db->map[map_value & map_db->mask]; - - dev_printk(KERN_INFO, &pdev->dev, "MAP ["); - for (i = 0; i < 4; i++) { - switch (map[i]) { - case RV: - invalid_map = 1; - printk(" XX"); - break; - - case NA: - printk(" --"); - break; - - case IDE: - WARN_ON((i & 1) || map[i + 1] != IDE); - pinfo[i / 2] = piix_port_info[ich5_pata]; - i++; - printk(" IDE IDE"); - break; - - default: - printk(" P%d", map[i]); - if (i & 1) - pinfo[i / 2].host_flags |= ATA_FLAG_SLAVE_POSS; - break; - } - } - printk(" ]\n"); - - if (invalid_map) - dev_printk(KERN_ERR, &pdev->dev, - "invalid MAP value %u\n", map_value); - - pinfo[0].private_data = (void *)map; - pinfo[1].private_data = (void *)map; -} - -/** - * piix_init_one - Register PIIX ATA PCI device with kernel services - * @pdev: PCI device to register - * @ent: Entry in piix_pci_tbl matching with @pdev - * - * Called from kernel PCI layer. We probe for combined mode (sigh), - * and then hand over control to libata, for it to do the rest. - * - * LOCKING: - * Inherited from PCI layer (may sleep). - * - * RETURNS: - * Zero on success, or -ERRNO value. - */ - -static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version; - struct ata_port_info port_info[2]; - struct ata_port_info *ppinfo[2] = { &port_info[0], &port_info[1] }; - unsigned long host_flags; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, - "version " DRV_VERSION "\n"); - - /* no hotplugging support (FIXME) */ - if (!in_module_init) - return -ENODEV; - - port_info[0] = piix_port_info[ent->driver_data]; - port_info[1] = piix_port_info[ent->driver_data]; - - host_flags = port_info[0].host_flags; - - if (host_flags & PIIX_FLAG_AHCI) { - u8 tmp; - pci_read_config_byte(pdev, PIIX_SCC, &tmp); - if (tmp == PIIX_AHCI_DEVICE) { - int rc = piix_disable_ahci(pdev); - if (rc) - return rc; - } - } - - /* Initialize SATA map */ - if (host_flags & ATA_FLAG_SATA) - piix_init_sata_map(pdev, port_info); - - /* On ICH5, some BIOSen disable the interrupt using the - * PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3. - * On ICH6, this bit has the same effect, but only when - * MSI is disabled (and it is disabled, as we don't use - * message-signalled interrupts currently). - */ - if (host_flags & PIIX_FLAG_CHECKINTR) - pci_intx(pdev, 1); - - if (piix_check_450nx_errata(pdev)) { - /* This writes into the master table but it does not - really matter for this errata as we will apply it to - all the PIIX devices on the board */ - port_info[0].mwdma_mask = 0; - port_info[0].udma_mask = 0; - port_info[1].mwdma_mask = 0; - port_info[1].udma_mask = 0; - } - return ata_pci_init_one(pdev, ppinfo, 2); -} - -static int __init piix_init(void) -{ - int rc; - - DPRINTK("pci_module_init\n"); - rc = pci_module_init(&piix_pci_driver); - if (rc) - return rc; - - in_module_init = 0; - - DPRINTK("done\n"); - return 0; -} - -static void __exit piix_exit(void) -{ - pci_unregister_driver(&piix_pci_driver); -} - -module_init(piix_init); -module_exit(piix_exit); - diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c index 57295bcea3e..e397129c90d 100644 --- a/drivers/scsi/atari_NCR5380.c +++ b/drivers/scsi/atari_NCR5380.c @@ -507,7 +507,7 @@ static __inline__ void initialize_SCp(Scsi_Cmnd *cmd) */ if (cmd->use_sg) { - cmd->SCp.buffer = (struct scatterlist *) cmd->buffer; + cmd->SCp.buffer = (struct scatterlist *) cmd->request_buffer; cmd->SCp.buffers_residual = cmd->use_sg - 1; cmd->SCp.ptr = (char *)page_address(cmd->SCp.buffer->page)+ cmd->SCp.buffer->offset; @@ -524,7 +524,6 @@ static __inline__ void initialize_SCp(Scsi_Cmnd *cmd) } } -#include <linux/config.h> #include <linux/delay.h> #if NDEBUG diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c index f677c5a32a6..e1be4a4387c 100644 --- a/drivers/scsi/atari_scsi.c +++ b/drivers/scsi/atari_scsi.c @@ -65,7 +65,6 @@ -#include <linux/config.h> #include <linux/module.h> #define NDEBUG (0) diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c index 3ee4d4d3f44..0ec41f34f46 100644 --- a/drivers/scsi/atp870u.c +++ b/drivers/scsi/atp870u.c @@ -2625,29 +2625,32 @@ static int atp870u_probe(struct pci_dev *pdev, const struct pci_device_id *ent) unsigned int base_io, tmport, error,n; unsigned char host_id; struct Scsi_Host *shpnt = NULL; - struct atp_unit atp_dev, *p; + struct atp_unit *atpdev, *p; unsigned char setupdata[2][16]; int count = 0; - + + atpdev = kzalloc(sizeof(*atpdev), GFP_KERNEL); + if (!atpdev) + return -ENOMEM; + if (pci_enable_device(pdev)) - return -EIO; + goto err_eio; if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { printk(KERN_INFO "atp870u: use 32bit DMA mask.\n"); } else { printk(KERN_ERR "atp870u: DMA mask required but not available.\n"); - return -EIO; + goto err_eio; } - memset(&atp_dev, 0, sizeof atp_dev); /* * It's probably easier to weed out some revisions like * this than via the PCI device table */ if (ent->device == PCI_DEVICE_ID_ARTOP_AEC7610) { - error = pci_read_config_byte(pdev, PCI_CLASS_REVISION, &atp_dev.chip_ver); - if (atp_dev.chip_ver < 2) - return -EIO; + error = pci_read_config_byte(pdev, PCI_CLASS_REVISION, &atpdev->chip_ver); + if (atpdev->chip_ver < 2) + goto err_eio; } switch (ent->device) { @@ -2656,15 +2659,15 @@ static int atp870u_probe(struct pci_dev *pdev, const struct pci_device_id *ent) case ATP880_DEVID1: case ATP880_DEVID2: case ATP885_DEVID: - atp_dev.chip_ver = 0x04; + atpdev->chip_ver = 0x04; default: break; } base_io = pci_resource_start(pdev, 0); base_io &= 0xfffffff8; - + if ((ent->device == ATP880_DEVID1)||(ent->device == ATP880_DEVID2)) { - error = pci_read_config_byte(pdev, PCI_CLASS_REVISION, &atp_dev.chip_ver); + error = pci_read_config_byte(pdev, PCI_CLASS_REVISION, &atpdev->chip_ver); pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80);//JCC082803 host_id = inb(base_io + 0x39); @@ -2672,17 +2675,17 @@ static int atp870u_probe(struct pci_dev *pdev, const struct pci_device_id *ent) printk(KERN_INFO " ACARD AEC-67160 PCI Ultra3 LVD Host Adapter: %d" " IO:%x, IRQ:%d.\n", count, base_io, pdev->irq); - atp_dev.ioport[0] = base_io + 0x40; - atp_dev.pciport[0] = base_io + 0x28; - atp_dev.dev_id = ent->device; - atp_dev.host_id[0] = host_id; + atpdev->ioport[0] = base_io + 0x40; + atpdev->pciport[0] = base_io + 0x28; + atpdev->dev_id = ent->device; + atpdev->host_id[0] = host_id; tmport = base_io + 0x22; - atp_dev.scam_on = inb(tmport); + atpdev->scam_on = inb(tmport); tmport += 0x13; - atp_dev.global_map[0] = inb(tmport); + atpdev->global_map[0] = inb(tmport); tmport += 0x07; - atp_dev.ultra_map[0] = inw(tmport); + atpdev->ultra_map[0] = inw(tmport); n = 0x3f09; next_fblk_880: @@ -2695,63 +2698,63 @@ next_fblk_880: if (inb(base_io + 0x30) == 0xff) goto flash_ok_880; - atp_dev.sp[0][m++] = inb(base_io + 0x30); - atp_dev.sp[0][m++] = inb(base_io + 0x31); - atp_dev.sp[0][m++] = inb(base_io + 0x32); - atp_dev.sp[0][m++] = inb(base_io + 0x33); + atpdev->sp[0][m++] = inb(base_io + 0x30); + atpdev->sp[0][m++] = inb(base_io + 0x31); + atpdev->sp[0][m++] = inb(base_io + 0x32); + atpdev->sp[0][m++] = inb(base_io + 0x33); outw(n, base_io + 0x34); n += 0x0002; - atp_dev.sp[0][m++] = inb(base_io + 0x30); - atp_dev.sp[0][m++] = inb(base_io + 0x31); - atp_dev.sp[0][m++] = inb(base_io + 0x32); - atp_dev.sp[0][m++] = inb(base_io + 0x33); + atpdev->sp[0][m++] = inb(base_io + 0x30); + atpdev->sp[0][m++] = inb(base_io + 0x31); + atpdev->sp[0][m++] = inb(base_io + 0x32); + atpdev->sp[0][m++] = inb(base_io + 0x33); outw(n, base_io + 0x34); n += 0x0002; - atp_dev.sp[0][m++] = inb(base_io + 0x30); - atp_dev.sp[0][m++] = inb(base_io + 0x31); - atp_dev.sp[0][m++] = inb(base_io + 0x32); - atp_dev.sp[0][m++] = inb(base_io + 0x33); + atpdev->sp[0][m++] = inb(base_io + 0x30); + atpdev->sp[0][m++] = inb(base_io + 0x31); + atpdev->sp[0][m++] = inb(base_io + 0x32); + atpdev->sp[0][m++] = inb(base_io + 0x33); outw(n, base_io + 0x34); n += 0x0002; - atp_dev.sp[0][m++] = inb(base_io + 0x30); - atp_dev.sp[0][m++] = inb(base_io + 0x31); - atp_dev.sp[0][m++] = inb(base_io + 0x32); - atp_dev.sp[0][m++] = inb(base_io + 0x33); + atpdev->sp[0][m++] = inb(base_io + 0x30); + atpdev->sp[0][m++] = inb(base_io + 0x31); + atpdev->sp[0][m++] = inb(base_io + 0x32); + atpdev->sp[0][m++] = inb(base_io + 0x33); n += 0x0018; goto next_fblk_880; flash_ok_880: outw(0, base_io + 0x34); - atp_dev.ultra_map[0] = 0; - atp_dev.async[0] = 0; + atpdev->ultra_map[0] = 0; + atpdev->async[0] = 0; for (k = 0; k < 16; k++) { n = 1; n = n << k; - if (atp_dev.sp[0][k] > 1) { - atp_dev.ultra_map[0] |= n; + if (atpdev->sp[0][k] > 1) { + atpdev->ultra_map[0] |= n; } else { - if (atp_dev.sp[0][k] == 0) - atp_dev.async[0] |= n; + if (atpdev->sp[0][k] == 0) + atpdev->async[0] |= n; } } - atp_dev.async[0] = ~(atp_dev.async[0]); - outb(atp_dev.global_map[0], base_io + 0x35); + atpdev->async[0] = ~(atpdev->async[0]); + outb(atpdev->global_map[0], base_io + 0x35); shpnt = scsi_host_alloc(&atp870u_template, sizeof(struct atp_unit)); if (!shpnt) - return -ENOMEM; + goto err_nomem; p = (struct atp_unit *)&shpnt->hostdata; - atp_dev.host = shpnt; - atp_dev.pdev = pdev; + atpdev->host = shpnt; + atpdev->pdev = pdev; pci_set_drvdata(pdev, p); - memcpy(p, &atp_dev, sizeof atp_dev); + memcpy(p, atpdev, sizeof(*atpdev)); if (atp870u_init_tables(shpnt) < 0) { printk(KERN_ERR "Unable to allocate tables for Acard controller\n"); goto unregister; } - if (request_irq(pdev->irq, atp870u_intr_handle, SA_SHIRQ, "atp880i", shpnt)) { + if (request_irq(pdev->irq, atp870u_intr_handle, IRQF_SHARED, "atp880i", shpnt)) { printk(KERN_ERR "Unable to allocate IRQ%d for Acard controller.\n", pdev->irq); goto free_tables; } @@ -2798,31 +2801,31 @@ flash_ok_880: printk(KERN_INFO " ACARD AEC-67162 PCI Ultra3 LVD Host Adapter: IO:%x, IRQ:%d.\n" , base_io, pdev->irq); - atp_dev.pdev = pdev; - atp_dev.dev_id = ent->device; - atp_dev.baseport = base_io; - atp_dev.ioport[0] = base_io + 0x80; - atp_dev.ioport[1] = base_io + 0xc0; - atp_dev.pciport[0] = base_io + 0x40; - atp_dev.pciport[1] = base_io + 0x50; + atpdev->pdev = pdev; + atpdev->dev_id = ent->device; + atpdev->baseport = base_io; + atpdev->ioport[0] = base_io + 0x80; + atpdev->ioport[1] = base_io + 0xc0; + atpdev->pciport[0] = base_io + 0x40; + atpdev->pciport[1] = base_io + 0x50; shpnt = scsi_host_alloc(&atp870u_template, sizeof(struct atp_unit)); if (!shpnt) - return -ENOMEM; + goto err_nomem; p = (struct atp_unit *)&shpnt->hostdata; - atp_dev.host = shpnt; - atp_dev.pdev = pdev; + atpdev->host = shpnt; + atpdev->pdev = pdev; pci_set_drvdata(pdev, p); - memcpy(p, &atp_dev, sizeof(struct atp_unit)); + memcpy(p, atpdev, sizeof(struct atp_unit)); if (atp870u_init_tables(shpnt) < 0) goto unregister; #ifdef ED_DBGP printk("request_irq() shpnt %p hostdata %p\n", shpnt, p); #endif - if (request_irq(pdev->irq, atp870u_intr_handle, SA_SHIRQ, "atp870u", shpnt)) { + if (request_irq(pdev->irq, atp870u_intr_handle, IRQF_SHARED, "atp870u", shpnt)) { printk(KERN_ERR "Unable to allocate IRQ for Acard controller.\n"); goto free_tables; } @@ -2974,43 +2977,43 @@ flash_ok_885: printk(KERN_INFO " ACARD AEC-671X PCI Ultra/W SCSI-2/3 Host Adapter: %d " "IO:%x, IRQ:%d.\n", count, base_io, pdev->irq); - atp_dev.ioport[0] = base_io; - atp_dev.pciport[0] = base_io + 0x20; - atp_dev.dev_id = ent->device; + atpdev->ioport[0] = base_io; + atpdev->pciport[0] = base_io + 0x20; + atpdev->dev_id = ent->device; host_id &= 0x07; - atp_dev.host_id[0] = host_id; + atpdev->host_id[0] = host_id; tmport = base_io + 0x22; - atp_dev.scam_on = inb(tmport); + atpdev->scam_on = inb(tmport); tmport += 0x0b; - atp_dev.global_map[0] = inb(tmport++); - atp_dev.ultra_map[0] = inw(tmport); + atpdev->global_map[0] = inb(tmport++); + atpdev->ultra_map[0] = inw(tmport); - if (atp_dev.ultra_map[0] == 0) { - atp_dev.scam_on = 0x00; - atp_dev.global_map[0] = 0x20; - atp_dev.ultra_map[0] = 0xffff; + if (atpdev->ultra_map[0] == 0) { + atpdev->scam_on = 0x00; + atpdev->global_map[0] = 0x20; + atpdev->ultra_map[0] = 0xffff; } shpnt = scsi_host_alloc(&atp870u_template, sizeof(struct atp_unit)); if (!shpnt) - return -ENOMEM; + goto err_nomem; p = (struct atp_unit *)&shpnt->hostdata; - atp_dev.host = shpnt; - atp_dev.pdev = pdev; + atpdev->host = shpnt; + atpdev->pdev = pdev; pci_set_drvdata(pdev, p); - memcpy(p, &atp_dev, sizeof atp_dev); + memcpy(p, atpdev, sizeof(*atpdev)); if (atp870u_init_tables(shpnt) < 0) goto unregister; - if (request_irq(pdev->irq, atp870u_intr_handle, SA_SHIRQ, "atp870i", shpnt)) { + if (request_irq(pdev->irq, atp870u_intr_handle, IRQF_SHARED, "atp870i", shpnt)) { printk(KERN_ERR "Unable to allocate IRQ%d for Acard controller.\n", pdev->irq); goto free_tables; } spin_lock_irqsave(shpnt->host_lock, flags); - if (atp_dev.chip_ver > 0x07) { /* check if atp876 chip then enable terminator */ + if (atpdev->chip_ver > 0x07) { /* check if atp876 chip then enable terminator */ tmport = base_io + 0x3e; outb(0x00, tmport); } @@ -3044,7 +3047,7 @@ flash_ok_885: outb((inb(tmport) & 0xef), tmport); tmport++; outb((inb(tmport) | 0x20), tmport); - if (atp_dev.chip_ver == 4) + if (atpdev->chip_ver == 4) shpnt->max_id = 16; else shpnt->max_id = 8; @@ -3093,6 +3096,12 @@ unregister: printk("atp870u_prob:unregister\n"); scsi_host_put(shpnt); return -1; +err_eio: + kfree(atpdev); + return -EIO; +err_nomem: + kfree(atpdev); + return -ENOMEM; } /* The abort command does not leave the device in a clean state where diff --git a/drivers/scsi/blz1230.c b/drivers/scsi/blz1230.c index 3867ac2de4c..329a8f297b3 100644 --- a/drivers/scsi/blz1230.c +++ b/drivers/scsi/blz1230.c @@ -172,7 +172,7 @@ int __init blz1230_esp_detect(struct scsi_host_template *tpnt) esp->irq = IRQ_AMIGA_PORTS; esp->slot = board+REAL_BLZ1230_ESP_ADDR; - if (request_irq(IRQ_AMIGA_PORTS, esp_intr, SA_SHIRQ, + if (request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED, "Blizzard 1230 SCSI IV", esp->ehost)) goto err_out; diff --git a/drivers/scsi/blz2060.c b/drivers/scsi/blz2060.c index 4ebe69e3275..b6c137b9735 100644 --- a/drivers/scsi/blz2060.c +++ b/drivers/scsi/blz2060.c @@ -146,7 +146,7 @@ int __init blz2060_esp_detect(struct scsi_host_template *tpnt) esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer); esp->irq = IRQ_AMIGA_PORTS; - request_irq(IRQ_AMIGA_PORTS, esp_intr, SA_SHIRQ, + request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED, "Blizzard 2060 SCSI", esp->ehost); /* Figure out our scsi ID on the bus */ diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c index d9abd1645d1..f6caa430776 100644 --- a/drivers/scsi/ch.c +++ b/drivers/scsi/ch.c @@ -7,7 +7,6 @@ #define VERSION "0.25" -#include <linux/config.h> #include <linux/module.h> #include <linux/init.h> #include <linux/fs.h> diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c index d92d5040a9f..61f6024b61b 100644 --- a/drivers/scsi/constants.c +++ b/drivers/scsi/constants.c @@ -5,9 +5,9 @@ * Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 07 3 May 2002) * by D. Gilbert and aeb (20020609) * Additions for SPC-3 T10/1416-D Rev 21 22 Sept 2004, D. Gilbert 20041025 + * Update to SPC-4 T10/1713-D Rev 5a, 14 June 2006, D. Gilbert 20060702 */ -#include <linux/config.h> #include <linux/blkdev.h> #include <linux/module.h> #include <linux/kernel.h> @@ -37,55 +37,56 @@ static const char * cdb_byte0_names[] = { /* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense", /* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL, "Reasssign Blocks", -/* 08-0d */ "Read (6)", NULL, "Write (6)", "Seek (6)", NULL, NULL, +/* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL, /* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry", -/* 13-16 */ "Verify (6)", "Recover Buffered Data", "Mode Select (6)", - "Reserve (6)", -/* 17-1a */ "Release (6)", "Copy", "Erase", "Mode Sense (6)", +/* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)", + "Reserve(6)", +/* 17-1a */ "Release(6)", "Copy", "Erase", "Mode Sense(6)", /* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic", /* 1e-1f */ "Prevent/Allow Medium Removal", NULL, /* 20-22 */ NULL, NULL, NULL, /* 23-28 */ "Read Format Capacities", "Set Window", - "Read Capacity (10)", NULL, NULL, "Read (10)", -/* 29-2d */ "Read Generation", "Write (10)", "Seek (10)", "Erase (10)", - "Read updated block", -/* 2e-31 */ "Write Verify (10)", "Verify (10)", "Search High", "Search Equal", + "Read Capacity(10)", NULL, NULL, "Read(10)", +/* 29-2d */ "Read Generation", "Write(10)", "Seek(10)", "Erase(10)", + "Read updated block", +/* 2e-31 */ "Write Verify(10)", "Verify(10)", "Search High", "Search Equal", /* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position", -/* 35-37 */ "Synchronize Cache (10)", "Lock/Unlock Cache (10)", +/* 35-37 */ "Synchronize Cache(10)", "Lock/Unlock Cache(10)", "Read Defect Data(10)", /* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer", "Read Buffer", -/* 3d-3f */ "Update Block", "Read Long (10)", "Write Long (10)", -/* 40-41 */ "Change Definition", "Write Same (10)", +/* 3d-3f */ "Update Block", "Read Long(10)", "Write Long(10)", +/* 40-41 */ "Change Definition", "Write Same(10)", /* 42-48 */ "Read sub-channel", "Read TOC/PMA/ATIP", "Read density support", - "Play audio (10)", "Get configuration", "Play audio msf", + "Play audio(10)", "Get configuration", "Play audio msf", "Play audio track/index", -/* 49-4f */ "Play track relative (10)", "Get event status notification", +/* 49-4f */ "Play track relative(10)", "Get event status notification", "Pause/resume", "Log Select", "Log Sense", "Stop play/scan", NULL, /* 50-55 */ "Xdwrite", "Xpwrite, Read disk info", "Xdread, Read track info", - "Reserve track", "Send OPC info", "Mode Select (10)", -/* 56-5b */ "Reserve (10)", "Release (10)", "Repair track", "Read master cue", - "Mode Sense (10)", "Close track/session", + "Reserve track", "Send OPC info", "Mode Select(10)", +/* 56-5b */ "Reserve(10)", "Release(10)", "Repair track", "Read master cue", + "Mode Sense(10)", "Close track/session", /* 5c-5f */ "Read buffer capacity", "Send cue sheet", "Persistent reserve in", "Persistent reserve out", /* 60-67 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* 68-6f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* 70-77 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* 78-7f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, "Variable length", -/* 80-84 */ "Xdwrite (16)", "Rebuild (16)", "Regenerate (16)", "Extended copy", +/* 80-84 */ "Xdwrite(16)", "Rebuild(16)", "Regenerate(16)", "Extended copy", "Receive copy results", -/* 85-89 */ "Memory Export In (16)", "Access control in", "Access control out", - "Read (16)", "Memory Export Out (16)", -/* 8a-8f */ "Write (16)", NULL, "Read attributes", "Write attributes", - "Write and verify (16)", "Verify (16)", -/* 90-94 */ "Pre-fetch (16)", "Synchronize cache (16)", - "Lock/unlock cache (16)", "Write same (16)", NULL, +/* 85-89 */ "ATA command pass through(16)", "Access control in", + "Access control out", "Read(16)", "Memory Export Out(16)", +/* 8a-8f */ "Write(16)", NULL, "Read attributes", "Write attributes", + "Write and verify(16)", "Verify(16)", +/* 90-94 */ "Pre-fetch(16)", "Synchronize cache(16)", + "Lock/unlock cache(16)", "Write same(16)", NULL, /* 95-99 */ NULL, NULL, NULL, NULL, NULL, -/* 9a-9f */ NULL, NULL, NULL, NULL, "Service action in (16)", - "Service action out (16)", -/* a0-a5 */ "Report luns", "Blank", "Send event", "Maintenance in", - "Maintenance out", "Move medium/play audio(12)", +/* 9a-9f */ NULL, NULL, NULL, NULL, "Service action in(16)", + "Service action out(16)", +/* a0-a5 */ "Report luns", "ATA command pass through(12)/Blank", + "Security protocol in", "Maintenance in", "Maintenance out", + "Move medium/play audio(12)", /* a6-a9 */ "Exchange medium", "Move medium attached", "Read(12)", "Play track relative(12)", /* aa-ae */ "Write(12)", NULL, "Erase(12), Get Performance", @@ -93,12 +94,12 @@ static const char * cdb_byte0_names[] = { /* af-b1 */ "Verify(12)", "Search data high(12)", "Search data equal(12)", /* b2-b4 */ "Search data low(12)", "Set limits(12)", "Read element status attached", -/* b5-b6 */ "Request volume element address", "Send volume tag, set streaming", +/* b5-b6 */ "Security protocol out", "Send volume tag, set streaming", /* b7-b9 */ "Read defect data(12)", "Read element status", "Read CD msf", /* ba-bc */ "Redundancy group (in), Scan", - "Redundancy group (out), Set cd-rom speed", "Spare in, Play cd", -/* bd-bf */ "Spare out, Mechanism status", "Volume set in, Read cd", - "Volume set out, Send DVD structure", + "Redundancy group (out), Set cd-rom speed", "Spare (in), Play cd", +/* bd-bf */ "Spare (out), Mechanism status", "Volume set (in), Read cd", + "Volume set (out), Send DVD structure", }; struct value_name_pair { @@ -113,6 +114,7 @@ static const struct value_name_pair maint_in_arr[] = { {0xc, "Report supported operation codes"}, {0xd, "Report supported task management functions"}, {0xe, "Report priority"}, + {0xf, "Report timestamp"}, }; #define MAINT_IN_SZ ARRAY_SIZE(maint_in_arr) @@ -121,6 +123,7 @@ static const struct value_name_pair maint_out_arr[] = { {0xa, "Set target port groups"}, {0xb, "Change aliases"}, {0xe, "Set priority"}, + {0xe, "Set timestamp"}, }; #define MAINT_OUT_SZ ARRAY_SIZE(maint_out_arr) @@ -428,6 +431,7 @@ static struct error_info additional[] = {0x001A, "Rewind operation in progress"}, {0x001B, "Set capacity operation in progress"}, {0x001C, "Verify operation in progress"}, + {0x001D, "ATA pass through information available"}, {0x0100, "No index/sector signal"}, @@ -439,7 +443,7 @@ static struct error_info additional[] = {0x0400, "Logical unit not ready, cause not reportable"}, {0x0401, "Logical unit is in process of becoming ready"}, - {0x0402, "Logical unit not ready, initializing cmd. required"}, + {0x0402, "Logical unit not ready, initializing command required"}, {0x0403, "Logical unit not ready, manual intervention required"}, {0x0404, "Logical unit not ready, format in progress"}, {0x0405, "Logical unit not ready, rebuild in progress"}, @@ -479,6 +483,9 @@ static struct error_info additional[] = {0x0B00, "Warning"}, {0x0B01, "Warning - specified temperature exceeded"}, {0x0B02, "Warning - enclosure degraded"}, + {0x0B03, "Warning - background self-test failed"}, + {0x0B04, "Warning - background pre-scan detected medium error"}, + {0x0B05, "Warning - background medium scan detected medium error"}, {0x0C00, "Write error"}, {0x0C01, "Write error - recovered with auto reallocation"}, @@ -494,6 +501,7 @@ static struct error_info additional[] = {0x0C0B, "Auxiliary memory write error"}, {0x0C0C, "Write error - unexpected unsolicited data"}, {0x0C0D, "Write error - not enough unsolicited data"}, + {0x0C0F, "Defects in error window"}, {0x0D00, "Error detected by third party temporary initiator"}, {0x0D01, "Third party device failure"}, @@ -505,11 +513,12 @@ static struct error_info additional[] = {0x0E00, "Invalid information unit"}, {0x0E01, "Information unit too short"}, {0x0E02, "Information unit too long"}, + {0x0E03, "Invalid field in command information unit"}, {0x1000, "Id CRC or ECC error"}, - {0x1001, "Data block guard check failed"}, - {0x1002, "Data block application tag check failed"}, - {0x1003, "Data block reference tag check failed"}, + {0x1001, "Logical block guard check failed"}, + {0x1002, "Logical block application tag check failed"}, + {0x1003, "Logical block reference tag check failed"}, {0x1100, "Unrecovered read error"}, {0x1101, "Read retries exhausted"}, @@ -531,6 +540,7 @@ static struct error_info additional[] = {0x1111, "Read error - loss of streaming"}, {0x1112, "Auxiliary memory read error"}, {0x1113, "Read error - failed retransmission request"}, + {0x1114, "Read error - lba marked bad by application client"}, {0x1200, "Address mark not found for id field"}, @@ -611,11 +621,14 @@ static struct error_info additional[] = {0x2100, "Logical block address out of range"}, {0x2101, "Invalid element address"}, {0x2102, "Invalid address for write"}, + {0x2103, "Invalid write crossing layer jump"}, {0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"}, {0x2400, "Invalid field in cdb"}, {0x2401, "CDB decryption error"}, + {0x2402, "Obsolete"}, + {0x2403, "Obsolete"}, {0x2404, "Security audit value frozen"}, {0x2405, "Security working key frozen"}, {0x2406, "Nonce not unique"}, @@ -638,7 +651,10 @@ static struct error_info additional[] = {0x260C, "Invalid operation for copy source or destination"}, {0x260D, "Copy segment granularity violation"}, {0x260E, "Invalid parameter while port is enabled"}, - {0x260F, "Invalid data-out buffer integrity"}, + {0x260F, "Invalid data-out buffer integrity check value"}, + {0x2610, "Data decryption key fail limit reached"}, + {0x2611, "Incomplete key-associated data set"}, + {0x2612, "Vendor specific key reference not found"}, {0x2700, "Write protected"}, {0x2701, "Hardware write protected"}, @@ -650,6 +666,7 @@ static struct error_info additional[] = {0x2800, "Not ready to ready change, medium may have changed"}, {0x2801, "Import or export element accessed"}, + {0x2802, "Format-layer may have changed"}, {0x2900, "Power on, reset, or bus device reset occurred"}, {0x2901, "Power on occurred"}, @@ -670,6 +687,11 @@ static struct error_info additional[] = {0x2A07, "Implicit asymmetric access state transition failed"}, {0x2A08, "Priority changed"}, {0x2A09, "Capacity data has changed"}, + {0x2A10, "Timestamp changed"}, + {0x2A11, "Data encryption parameters changed by another i_t nexus"}, + {0x2A12, "Data encryption parameters changed by vendor specific " + "event"}, + {0x2A13, "Data encryption key instance counter has changed"}, {0x2B00, "Copy cannot execute since host cannot disconnect"}, @@ -691,6 +713,7 @@ static struct error_info additional[] = {0x2E00, "Insufficient time for operation"}, {0x2F00, "Commands cleared by another initiator"}, + {0x2F01, "Commands cleared by power loss notification"}, {0x3000, "Incompatible medium installed"}, {0x3001, "Cannot read medium - unknown format"}, @@ -703,7 +726,8 @@ static struct error_info additional[] = {0x3008, "Cannot write - application code mismatch"}, {0x3009, "Current session not fixated for append"}, {0x300A, "Cleaning request rejected"}, - {0x300C, "WORM medium, overwrite attempted"}, + {0x300C, "WORM medium - overwrite attempted"}, + {0x300D, "WORM medium - integrity check"}, {0x3010, "Medium not formatted"}, {0x3100, "Medium format corrupted"}, @@ -791,6 +815,9 @@ static struct error_info additional[] = {0x3F0F, "Echo buffer overwritten"}, {0x3F10, "Medium loadable"}, {0x3F11, "Medium auxiliary memory accessible"}, + {0x3F12, "iSCSI IP address added"}, + {0x3F13, "iSCSI IP address removed"}, + {0x3F14, "iSCSI IP address changed"}, /* * {0x40NN, "Ram failure"}, * {0x40NN, "Diagnostic failure on component nn"}, @@ -800,6 +827,7 @@ static struct error_info additional[] = {0x4300, "Message error"}, {0x4400, "Internal target failure"}, + {0x4471, "ATA device failed set features"}, {0x4500, "Select or reselect failure"}, @@ -808,9 +836,10 @@ static struct error_info additional[] = {0x4700, "Scsi parity error"}, {0x4701, "Data phase CRC error detected"}, {0x4702, "Scsi parity error detected during st data phase"}, - {0x4703, "Information unit CRC error detected"}, + {0x4703, "Information unit iuCRC error detected"}, {0x4704, "Asynchronous information protection error detected"}, {0x4705, "Protocol service CRC error"}, + {0x4706, "Phy test function in progress"}, {0x477f, "Some commands cleared by iSCSI Protocol event"}, {0x4800, "Initiator detected error message received"}, @@ -845,6 +874,8 @@ static struct error_info additional[] = {0x5300, "Media load or eject failed"}, {0x5301, "Unload tape failure"}, {0x5302, "Medium removal prevented"}, + {0x5303, "Medium removal prevented by data transfer element"}, + {0x5304, "Medium thread or unthread failure"}, {0x5400, "Scsi to host system interface failure"}, @@ -856,6 +887,7 @@ static struct error_info additional[] = {0x5505, "Insufficient access control resources"}, {0x5506, "Auxiliary memory out of space"}, {0x5507, "Quota error"}, + {0x5508, "Maximum number of supplemental decryption keys exceeded"}, {0x5700, "Unable to recover table-of-contents"}, @@ -1005,6 +1037,7 @@ static struct error_info additional[] = {0x6708, "Assign failure occurred"}, {0x6709, "Multiply assigned logical unit"}, {0x670A, "Set target port groups command failed"}, + {0x670B, "ATA device feature not enabled"}, {0x6800, "Logical unit not configured"}, @@ -1031,6 +1064,8 @@ static struct error_info additional[] = {0x6F03, "Read of scrambled sector without authentication"}, {0x6F04, "Media region code is mismatched to logical unit region"}, {0x6F05, "Drive region must be permanent/region reset count error"}, + {0x6F06, "Insufficient block count for binding nonce recording"}, + {0x6F07, "Conflict in binding nonce recording"}, /* * {0x70NN, "Decompression exception short algorithm id of nn"}, */ @@ -1042,6 +1077,8 @@ static struct error_info additional[] = {0x7203, "Session fixation error - incomplete track in session"}, {0x7204, "Empty or partially written reserved track"}, {0x7205, "No more track reservations allowed"}, + {0x7206, "RMZ extension is not allowed"}, + {0x7207, "No more test zone extensions are allowed"}, {0x7300, "Cd control error"}, {0x7301, "Power calibration area almost full"}, @@ -1050,6 +1087,18 @@ static struct error_info additional[] = {0x7304, "Program memory area update failure"}, {0x7305, "Program memory area is full"}, {0x7306, "RMA/PMA is almost full"}, + {0x7310, "Current power calibration area almost full"}, + {0x7311, "Current power calibration area is full"}, + {0x7317, "RDZ is full"}, + + {0x7400, "Security error"}, + {0x7401, "Unable to decrypt data"}, + {0x7402, "Unencrypted data encountered while decrypting"}, + {0x7403, "Incorrect data encryption key"}, + {0x7404, "Cryptographic integrity validation failed"}, + {0x7405, "Error decrypting data"}, + {0x7471, "Logical unit access not authorized"}, + {0, NULL} }; diff --git a/drivers/scsi/cyberstorm.c b/drivers/scsi/cyberstorm.c index a4a4fac5c0a..7c7cfb54e89 100644 --- a/drivers/scsi/cyberstorm.c +++ b/drivers/scsi/cyberstorm.c @@ -172,7 +172,7 @@ int __init cyber_esp_detect(struct scsi_host_template *tpnt) esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer); esp->irq = IRQ_AMIGA_PORTS; - request_irq(IRQ_AMIGA_PORTS, esp_intr, SA_SHIRQ, + request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED, "CyberStorm SCSI", esp->ehost); /* Figure out our scsi ID on the bus */ /* The DMA cond flag contains a hardcoded jumper bit diff --git a/drivers/scsi/cyberstormII.c b/drivers/scsi/cyberstormII.c index 3a803d73bc5..d88cb9cf091 100644 --- a/drivers/scsi/cyberstormII.c +++ b/drivers/scsi/cyberstormII.c @@ -153,7 +153,7 @@ int __init cyberII_esp_detect(struct scsi_host_template *tpnt) esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer); esp->irq = IRQ_AMIGA_PORTS; - request_irq(IRQ_AMIGA_PORTS, esp_intr, SA_SHIRQ, + request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED, "CyberStorm SCSI Mk II", esp->ehost); /* Figure out our scsi ID on the bus */ diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c index 18324525493..ff2b1796fa3 100644 --- a/drivers/scsi/dc395x.c +++ b/drivers/scsi/dc395x.c @@ -3771,7 +3771,7 @@ static void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb, * @target: The target for the new device. * @lun: The lun for the new device. * - * Return the new device if succesfull or NULL on failure. + * Return the new device if successful or NULL on failure. **/ static struct DeviceCtlBlk *device_alloc(struct AdapterCtlBlk *acb, u8 target, u8 lun) @@ -4562,7 +4562,7 @@ static int __devinit adapter_init(struct AdapterCtlBlk *acb, acb->io_port_base = io_port; acb->io_port_len = io_port_len; - if (request_irq(irq, dc395x_interrupt, SA_SHIRQ, DC395X_NAME, acb)) { + if (request_irq(irq, dc395x_interrupt, IRQF_SHARED, DC395X_NAME, acb)) { /* release the region we just claimed */ dprintkl(KERN_INFO, "Failed to register IRQ\n"); goto failed; diff --git a/drivers/scsi/dec_esp.c b/drivers/scsi/dec_esp.c index a35ee43a48d..eb32062f7e6 100644 --- a/drivers/scsi/dec_esp.c +++ b/drivers/scsi/dec_esp.c @@ -202,19 +202,19 @@ static int dec_esp_detect(struct scsi_host_template * tpnt) esp_initialize(esp); - if (request_irq(esp->irq, esp_intr, SA_INTERRUPT, + if (request_irq(esp->irq, esp_intr, IRQF_DISABLED, "ncr53c94", esp->ehost)) goto err_dealloc; if (request_irq(dec_interrupt[DEC_IRQ_ASC_MERR], - scsi_dma_merr_int, SA_INTERRUPT, + scsi_dma_merr_int, IRQF_DISABLED, "ncr53c94 error", esp->ehost)) goto err_free_irq; if (request_irq(dec_interrupt[DEC_IRQ_ASC_ERR], - scsi_dma_err_int, SA_INTERRUPT, + scsi_dma_err_int, IRQF_DISABLED, "ncr53c94 overrun", esp->ehost)) goto err_free_irq_merr; if (request_irq(dec_interrupt[DEC_IRQ_ASC_DMA], - scsi_dma_int, SA_INTERRUPT, + scsi_dma_int, IRQF_DISABLED, "ncr53c94 dma", esp->ehost)) goto err_free_irq_err; @@ -276,7 +276,7 @@ static int dec_esp_detect(struct scsi_host_template * tpnt) esp->dma_mmu_release_scsi_sgl = 0; esp->dma_advance_sg = 0; - if (request_irq(esp->irq, esp_intr, SA_INTERRUPT, + if (request_irq(esp->irq, esp_intr, IRQF_DISABLED, "PMAZ_AA", esp->ehost)) { esp_deallocate(esp); release_tc_card(slot); diff --git a/drivers/scsi/dmx3191d.c b/drivers/scsi/dmx3191d.c index 38e4010eff9..879a2665767 100644 --- a/drivers/scsi/dmx3191d.c +++ b/drivers/scsi/dmx3191d.c @@ -94,7 +94,7 @@ static int __devinit dmx3191d_probe_one(struct pci_dev *pdev, NCR5380_init(shost, FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E); - if (request_irq(pdev->irq, NCR5380_intr, SA_SHIRQ, + if (request_irq(pdev->irq, NCR5380_intr, IRQF_SHARED, DMX3191D_DRIVER_NAME, shost)) { /* * Steam powered scsi controllers run without an IRQ anyway diff --git a/drivers/scsi/dpt/dpti_i2o.h b/drivers/scsi/dpt/dpti_i2o.h index a9585f5235d..d84a281ad94 100644 --- a/drivers/scsi/dpt/dpti_i2o.h +++ b/drivers/scsi/dpt/dpti_i2o.h @@ -23,7 +23,6 @@ #include <asm/semaphore.h> /* Needed for MUTEX init macros */ #include <linux/version.h> -#include <linux/config.h> #include <linux/notifier.h> #include <asm/atomic.h> diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index b1b704a42ef..7b3bd34faf4 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -46,7 +46,6 @@ MODULE_DESCRIPTION("Adaptec I2O RAID Driver"); #include <linux/stat.h> #include <linux/slab.h> /* for kmalloc() */ -#include <linux/config.h> /* for CONFIG_PCI */ #include <linux/pci.h> /* for PCI support */ #include <linux/proc_fs.h> #include <linux/blkdev.h> @@ -185,7 +184,7 @@ static int adpt_detect(struct scsi_host_template* sht) PINFO("Detecting Adaptec I2O RAID controllers...\n"); /* search for all Adatpec I2O RAID cards */ - while ((pDev = pci_find_device( PCI_DPT_VENDOR_ID, PCI_ANY_ID, pDev))) { + while ((pDev = pci_get_device( PCI_DPT_VENDOR_ID, PCI_ANY_ID, pDev))) { if(pDev->device == PCI_DPT_DEVICE_ID || pDev->device == PCI_DPT_RAPTOR_DEVICE_ID){ if(adpt_install_hba(sht, pDev) ){ @@ -193,8 +192,11 @@ static int adpt_detect(struct scsi_host_template* sht) PERROR("Will not try to detect others.\n"); return hba_count-1; } + pci_dev_get(pDev); } } + if (pDev) + pci_dev_put(pDev); /* In INIT state, Activate IOPs */ for (pHba = hba_chain; pHba; pHba = pHba->next) { @@ -1009,7 +1011,7 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev printk(KERN_INFO" BAR1 %p - size= %x\n",msg_addr_virt,hba_map1_area_size); } - if (request_irq (pDev->irq, adpt_isr, SA_SHIRQ, pHba->name, pHba)) { + if (request_irq (pDev->irq, adpt_isr, IRQF_SHARED, pHba->name, pHba)) { printk(KERN_ERR"%s: Couldn't register IRQ %d\n", pHba->name, pDev->irq); adpt_i2o_delete_hba(pHba); return -EINVAL; @@ -1076,6 +1078,7 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba) } } } + pci_dev_put(pHba->pDev); kfree(pHba); if(hba_count <= 0){ diff --git a/drivers/scsi/dtc.c b/drivers/scsi/dtc.c index c5108c8c887..0d5713dfa20 100644 --- a/drivers/scsi/dtc.c +++ b/drivers/scsi/dtc.c @@ -280,7 +280,7 @@ found: /* With interrupts enabled, it will sometimes hang when doing heavy * reads. So better not enable them until I finger it out. */ if (instance->irq != SCSI_IRQ_NONE) - if (request_irq(instance->irq, dtc_intr, SA_INTERRUPT, "dtc", instance)) { + if (request_irq(instance->irq, dtc_intr, IRQF_DISABLED, "dtc", instance)) { printk(KERN_ERR "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq); instance->irq = SCSI_IRQ_NONE; } diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c index 059eeee4b55..a5ff43b1b26 100644 --- a/drivers/scsi/eata.c +++ b/drivers/scsi/eata.c @@ -477,7 +477,6 @@ * the driver sets host->wish_block = 1 for all ISA boards. */ -#include <linux/config.h> #include <linux/string.h> #include <linux/kernel.h> #include <linux/ioport.h> @@ -1222,7 +1221,7 @@ static int port_detect(unsigned long port_base, unsigned int j, /* Board detected, allocate its IRQ */ if (request_irq(irq, do_interrupt_handler, - SA_INTERRUPT | ((subversion == ESA) ? SA_SHIRQ : 0), + IRQF_DISABLED | ((subversion == ESA) ? IRQF_SHARED : 0), driver_name, (void *)&sha[j])) { printk("%s: unable to allocate IRQ %u, detaching.\n", name, irq); diff --git a/drivers/scsi/eata_generic.h b/drivers/scsi/eata_generic.h index 34bce2c9e92..635c14861f8 100644 --- a/drivers/scsi/eata_generic.h +++ b/drivers/scsi/eata_generic.h @@ -364,6 +364,7 @@ typedef struct hstd { __u8 moresupport; /* HBA supports MORE flag */ struct Scsi_Host *next; struct Scsi_Host *prev; + struct pci_dev *pdev; /* PCI device or NULL for non PCI */ struct eata_sp sp; /* status packet */ struct eata_ccb ccb[0]; /* ccb array begins here */ }hostdata; diff --git a/drivers/scsi/eata_pio.c b/drivers/scsi/eata_pio.c index 23beb48c79c..d312633db92 100644 --- a/drivers/scsi/eata_pio.c +++ b/drivers/scsi/eata_pio.c @@ -46,7 +46,6 @@ * last change: 2002/11/02 OS: Linux 2.5.45 * ************************************************************/ -#include <linux/config.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/sched.h> @@ -72,11 +71,11 @@ #include "eata_pio.h" -static uint ISAbases[MAXISA] = { +static unsigned int ISAbases[MAXISA] = { 0x1F0, 0x170, 0x330, 0x230 }; -static uint ISAirqs[MAXISA] = { +static unsigned int ISAirqs[MAXISA] = { 14, 12, 15, 11 }; @@ -85,7 +84,7 @@ static unsigned char EISAbases[] = { 1, 1, 1, 1, 1, 1, 1, 1 }; -static uint registered_HBAs; +static unsigned int registered_HBAs; static struct Scsi_Host *last_HBA; static struct Scsi_Host *first_HBA; static unsigned char reg_IRQ[16]; @@ -166,6 +165,7 @@ static int eata_pio_proc_info(struct Scsi_Host *shost, char *buffer, char **star static int eata_pio_release(struct Scsi_Host *sh) { + hostdata *hd = SD(sh); if (sh->irq && reg_IRQ[sh->irq] == 1) free_irq(sh->irq, NULL); else @@ -174,10 +174,13 @@ static int eata_pio_release(struct Scsi_Host *sh) if (sh->io_port && sh->n_io_port) release_region(sh->io_port, sh->n_io_port); } + /* At this point the PCI reference can go */ + if (hd->pdev) + pci_dev_put(hd->pdev); return 1; } -static void IncStat(struct scsi_pointer *SCp, uint Increment) +static void IncStat(struct scsi_pointer *SCp, unsigned int Increment) { SCp->ptr += Increment; if ((SCp->this_residual -= Increment) == 0) { @@ -191,46 +194,49 @@ static void IncStat(struct scsi_pointer *SCp, uint Increment) } } -static void eata_pio_int_handler(int irq, void *dev_id, struct pt_regs *regs); +static irqreturn_t eata_pio_int_handler(int irq, void *dev_id, struct pt_regs *regs); static irqreturn_t do_eata_pio_int_handler(int irq, void *dev_id, struct pt_regs *regs) { unsigned long flags; struct Scsi_Host *dev = dev_id; + irqreturn_t ret; spin_lock_irqsave(dev->host_lock, flags); - eata_pio_int_handler(irq, dev_id, regs); + ret = eata_pio_int_handler(irq, dev_id, regs); spin_unlock_irqrestore(dev->host_lock, flags); - return IRQ_HANDLED; + return ret; } -static void eata_pio_int_handler(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t eata_pio_int_handler(int irq, void *dev_id, struct pt_regs *regs) { - uint eata_stat = 0xfffff; + unsigned int eata_stat = 0xfffff; struct scsi_cmnd *cmd; hostdata *hd; struct eata_ccb *cp; - uint base; - uint x, z; + unsigned long base; + unsigned int x, z; struct Scsi_Host *sh; unsigned short zwickel = 0; unsigned char stat, odd; + irqreturn_t ret = IRQ_NONE; for (x = 1, sh = first_HBA; x <= registered_HBAs; x++, sh = SD(sh)->prev) { if (sh->irq != irq) continue; - if (inb((uint) sh->base + HA_RSTATUS) & HA_SBUSY) + if (inb(sh->base + HA_RSTATUS) & HA_SBUSY) continue; int_counter++; + ret = IRQ_HANDLED; hd = SD(sh); cp = &hd->ccb[0]; cmd = cp->cmd; - base = (uint) cmd->device->host->base; + base = cmd->device->host->base; do { stat = inb(base + HA_RSTATUS); @@ -305,7 +311,7 @@ static void eata_pio_int_handler(int irq, void *dev_id, struct pt_regs *regs) if (!(inb(base + HA_RSTATUS) & HA_SERROR)) { cmd->result = (DID_OK << 16); hd->devflags |= (1 << cp->cp_id); - } else if (hd->devflags & 1 << cp->cp_id) + } else if (hd->devflags & (1 << cp->cp_id)) cmd->result = (DID_OK << 16) + 0x02; else cmd->result = (DID_NO_CONNECT << 16); @@ -314,7 +320,7 @@ static void eata_pio_int_handler(int irq, void *dev_id, struct pt_regs *regs) cp->status = FREE; eata_stat = inb(base + HA_RSTATUS); printk(KERN_CRIT "eata_pio: int_handler, freeing locked " "queueslot\n"); - return; + return ret; } #if DBG_INTR2 if (stat != 0x50) @@ -326,12 +332,12 @@ static void eata_pio_int_handler(int irq, void *dev_id, struct pt_regs *regs) cmd->scsi_done(cmd); } - return; + return ret; } -static inline uint eata_pio_send_command(uint base, unsigned char command) +static inline unsigned int eata_pio_send_command(unsigned long base, unsigned char command) { - uint loop = HZ / 2; + unsigned int loop = 50; while (inb(base + HA_RSTATUS) & HA_SBUSY) if (--loop == 0) @@ -350,8 +356,8 @@ static inline uint eata_pio_send_command(uint base, unsigned char command) static int eata_pio_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) { - uint x, y; - uint base; + unsigned int x, y; + unsigned long base; hostdata *hd; struct Scsi_Host *sh; @@ -361,7 +367,7 @@ static int eata_pio_queue(struct scsi_cmnd *cmd, hd = HD(cmd); sh = cmd->device->host; - base = (uint) sh->base; + base = sh->base; /* use only slot 0, as 2001 can handle only one cmd at a time */ @@ -396,9 +402,9 @@ static int eata_pio_queue(struct scsi_cmnd *cmd, cp->DataIn = 0; /* Input mode */ cp->Interpret = (cmd->device->id == hd->hostid); - cp->cp_datalen = htonl((unsigned long) cmd->request_bufflen); + cp->cp_datalen = cpu_to_be32(cmd->request_bufflen); cp->Auto_Req_Sen = 0; - cp->cp_reqDMA = htonl(0); + cp->cp_reqDMA = 0; cp->reqlen = 0; cp->cp_id = cmd->device->id; @@ -407,7 +413,7 @@ static int eata_pio_queue(struct scsi_cmnd *cmd, cp->cp_identify = 1; memcpy(cp->cp_cdb, cmd->cmnd, COMMAND_SIZE(*cmd->cmnd)); - cp->cp_statDMA = htonl(0); + cp->cp_statDMA = 0; cp->cp_viraddr = cp; cp->cmd = cmd; @@ -446,14 +452,14 @@ static int eata_pio_queue(struct scsi_cmnd *cmd, DBG(DBG_QUEUE, scmd_printk(KERN_DEBUG, cmd, "Queued base %#.4lx pid: %ld " - "slot %d irq %d\n", (long) sh->base, cmd->pid, y, sh->irq)); + "slot %d irq %d\n", sh->base, cmd->pid, y, sh->irq)); return (0); } static int eata_pio_abort(struct scsi_cmnd *cmd) { - uint loop = HZ; + unsigned int loop = 100; DBG(DBG_ABNORM, scmd_printk(KERN_WARNING, cmd, "eata_pio_abort called pid: %ld\n", @@ -486,7 +492,7 @@ static int eata_pio_abort(struct scsi_cmnd *cmd) static int eata_pio_host_reset(struct scsi_cmnd *cmd) { - uint x, limit = 0; + unsigned int x, limit = 0; unsigned char success = 0; struct scsi_cmnd *sp; struct Scsi_Host *host = cmd->device->host; @@ -519,7 +525,7 @@ static int eata_pio_host_reset(struct scsi_cmnd *cmd) } /* hard reset the HBA */ - outb(EATA_CMD_RESET, (uint) cmd->device->host->base + HA_WCOMMAND); + outb(EATA_CMD_RESET, cmd->device->host->base + HA_WCOMMAND); DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: board reset done.\n")); HD(cmd)->state = RESET; @@ -559,7 +565,7 @@ static int eata_pio_host_reset(struct scsi_cmnd *cmd) } } -static char *get_pio_board_data(unsigned long base, uint irq, uint id, unsigned long cplen, unsigned short cppadlen) +static char *get_pio_board_data(unsigned long base, unsigned int irq, unsigned int id, unsigned long cplen, unsigned short cppadlen) { struct eata_ccb cp; static char buff[256]; @@ -571,8 +577,8 @@ static char *get_pio_board_data(unsigned long base, uint irq, uint id, unsigned cp.DataIn = 1; cp.Interpret = 1; /* Interpret command */ - cp.cp_datalen = htonl(254); - cp.cp_dataDMA = htonl(0); + cp.cp_datalen = cpu_to_be32(254); + cp.cp_dataDMA = cpu_to_be32(0); cp.cp_id = id; cp.cp_lun = 0; @@ -584,7 +590,7 @@ static char *get_pio_board_data(unsigned long base, uint irq, uint id, unsigned cp.cp_cdb[4] = 254; cp.cp_cdb[5] = 0; - if (eata_pio_send_command((uint) base, EATA_CMD_PIO_SEND_CP)) + if (eata_pio_send_command(base, EATA_CMD_PIO_SEND_CP)) return (NULL); while (!(inb(base + HA_RSTATUS) & HA_SDRQ)); outsw(base + HA_RDATA, &cp, cplen); @@ -605,7 +611,7 @@ static char *get_pio_board_data(unsigned long base, uint irq, uint id, unsigned } } -static int get_pio_conf_PIO(u32 base, struct get_conf *buf) +static int get_pio_conf_PIO(unsigned long base, struct get_conf *buf) { unsigned long loop = HZ / 2; int z; @@ -620,30 +626,30 @@ static int get_pio_conf_PIO(u32 base, struct get_conf *buf) if (--loop == 0) goto fail; - DBG(DBG_PIO && DBG_PROBE, printk(KERN_DEBUG "Issuing PIO READ CONFIG to HBA at %#x\n", base)); + DBG(DBG_PIO && DBG_PROBE, printk(KERN_DEBUG "Issuing PIO READ CONFIG to HBA at %#lx\n", base)); eata_pio_send_command(base, EATA_CMD_PIO_READ_CONFIG); - loop = HZ / 2; + loop = 50; for (p = (unsigned short *) buf; (long) p <= ((long) buf + (sizeof(struct get_conf) / 2)); p++) { while (!(inb(base + HA_RSTATUS) & HA_SDRQ)) if (--loop == 0) goto fail; - loop = HZ / 2; + loop = 50; *p = inw(base + HA_RDATA); } if (inb(base + HA_RSTATUS) & HA_SERROR) { DBG(DBG_PROBE, printk("eata_dma: get_conf_PIO, error during " - "transfer for HBA at %x\n", base)); + "transfer for HBA at %lx\n", base)); goto fail; } - if (htonl(EATA_SIGNATURE) != buf->signature) + if (cpu_to_be32(EATA_SIGNATURE) != buf->signature) goto fail; DBG(DBG_PIO && DBG_PROBE, printk(KERN_NOTICE "EATA Controller found " - "at %#4x EATA Level: %x\n", - base, (uint) (buf->version))); + "at %#4lx EATA Level: %x\n", + base, (unsigned int) (buf->version))); while (inb(base + HA_RSTATUS) & HA_SDRQ) inw(base + HA_RDATA); @@ -666,12 +672,12 @@ static int get_pio_conf_PIO(u32 base, struct get_conf *buf) static void print_pio_config(struct get_conf *gc) { printk("Please check values: (read config data)\n"); - printk("LEN: %d ver:%d OCS:%d TAR:%d TRNXFR:%d MORES:%d\n", (uint) ntohl(gc->len), gc->version, gc->OCS_enabled, gc->TAR_support, gc->TRNXFR, gc->MORE_support); - printk("HAAV:%d SCSIID0:%d ID1:%d ID2:%d QUEUE:%d SG:%d SEC:%d\n", gc->HAA_valid, gc->scsi_id[3], gc->scsi_id[2], gc->scsi_id[1], ntohs(gc->queuesiz), ntohs(gc->SGsiz), gc->SECOND); + printk("LEN: %d ver:%d OCS:%d TAR:%d TRNXFR:%d MORES:%d\n", be32_to_cpu(gc->len), gc->version, gc->OCS_enabled, gc->TAR_support, gc->TRNXFR, gc->MORE_support); + printk("HAAV:%d SCSIID0:%d ID1:%d ID2:%d QUEUE:%d SG:%d SEC:%d\n", gc->HAA_valid, gc->scsi_id[3], gc->scsi_id[2], gc->scsi_id[1], be16_to_cpu(gc->queuesiz), be16_to_cpu(gc->SGsiz), gc->SECOND); printk("IRQ:%d IRQT:%d FORCADR:%d MCH:%d RIDQ:%d\n", gc->IRQ, gc->IRQ_TR, gc->FORCADR, gc->MAX_CHAN, gc->ID_qest); } -static uint print_selftest(uint base) +static unsigned int print_selftest(unsigned int base) { unsigned char buffer[512]; #ifdef VERBOSE_SETUP @@ -698,7 +704,7 @@ static uint print_selftest(uint base) return (!(inb(base + HA_RSTATUS) & HA_SERROR)); } -static int register_pio_HBA(long base, struct get_conf *gc) +static int register_pio_HBA(long base, struct get_conf *gc, struct pci_dev *pdev) { unsigned long size = 0; char *buff; @@ -715,24 +721,24 @@ static int register_pio_HBA(long base, struct get_conf *gc) return 0; } - if ((buff = get_pio_board_data((uint) base, gc->IRQ, gc->scsi_id[3], cplen = (htonl(gc->cplen) + 1) / 2, cppadlen = (htons(gc->cppadlen) + 1) / 2)) == NULL) { - printk("HBA at %#lx didn't react on INQUIRY. Sorry.\n", (unsigned long) base); + if ((buff = get_pio_board_data(base, gc->IRQ, gc->scsi_id[3], cplen = (cpu_to_be32(gc->cplen) + 1) / 2, cppadlen = (cpu_to_be16(gc->cppadlen) + 1) / 2)) == NULL) { + printk("HBA at %#lx didn't react on INQUIRY. Sorry.\n", base); return 0; } if (!print_selftest(base) && !ALLOW_DMA_BOARDS) { - printk("HBA at %#lx failed while performing self test & setup.\n", (unsigned long) base); + printk("HBA at %#lx failed while performing self test & setup.\n", base); return 0; } - size = sizeof(hostdata) + (sizeof(struct eata_ccb) * ntohs(gc->queuesiz)); + size = sizeof(hostdata) + (sizeof(struct eata_ccb) * be16_to_cpu(gc->queuesiz)); sh = scsi_register(&driver_template, size); if (sh == NULL) return 0; if (!reg_IRQ[gc->IRQ]) { /* Interrupt already registered ? */ - if (!request_irq(gc->IRQ, do_eata_pio_int_handler, SA_INTERRUPT, "EATA-PIO", sh)) { + if (!request_irq(gc->IRQ, do_eata_pio_int_handler, IRQF_DISABLED, "EATA-PIO", sh)) { reg_IRQ[gc->IRQ]++; if (!gc->IRQ_TR) reg_IRQL[gc->IRQ] = 1; /* IRQ is edge triggered */ @@ -750,8 +756,8 @@ static int register_pio_HBA(long base, struct get_conf *gc) hd = SD(sh); - memset(hd->ccb, 0, (sizeof(struct eata_ccb) * ntohs(gc->queuesiz))); - memset(hd->reads, 0, sizeof(unsigned long) * 26); + memset(hd->ccb, 0, (sizeof(struct eata_ccb) * be16_to_cpu(gc->queuesiz))); + memset(hd->reads, 0, sizeof(hd->reads)); strlcpy(SD(sh)->vendor, &buff[8], sizeof(SD(sh)->vendor)); strlcpy(SD(sh)->name, &buff[16], sizeof(SD(sh)->name)); @@ -762,7 +768,7 @@ static int register_pio_HBA(long base, struct get_conf *gc) SD(sh)->revision[4] = buff[35]; SD(sh)->revision[5] = 0; - switch (ntohl(gc->len)) { + switch (be32_to_cpu(gc->len)) { case 0x1c: SD(sh)->EATA_revision = 'a'; break; @@ -778,7 +784,7 @@ static int register_pio_HBA(long base, struct get_conf *gc) SD(sh)->EATA_revision = '?'; } - if (ntohl(gc->len) >= 0x22) { + if (be32_to_cpu(gc->len) >= 0x22) { if (gc->is_PCI) hd->bustype = IS_PCI; else if (gc->is_EISA) @@ -812,6 +818,8 @@ static int register_pio_HBA(long base, struct get_conf *gc) hd->channel = 0; + hd->pdev = pci_dev_get(pdev); /* Keep a PCI reference */ + sh->max_id = 8; sh->max_lun = 8; @@ -842,7 +850,7 @@ static void find_pio_ISA(struct get_conf *buf) continue; if (!get_pio_conf_PIO(ISAbases[i], buf)) continue; - if (!register_pio_HBA(ISAbases[i], buf)) + if (!register_pio_HBA(ISAbases[i], buf, NULL)) release_region(ISAbases[i], 9); else ISAbases[i] = 0; @@ -874,7 +882,7 @@ static void find_pio_EISA(struct get_conf *buf) if (get_pio_conf_PIO(base, buf)) { DBG(DBG_PROBE && DBG_EISA, print_pio_config(buf)); if (buf->IRQ) { - if (!register_pio_HBA(base, buf)) + if (!register_pio_HBA(base, buf, NULL)) release_region(base, 9); } else { printk(KERN_NOTICE "eata_dma: No valid IRQ. HBA " "removed from list\n"); @@ -897,9 +905,9 @@ static void find_pio_PCI(struct get_conf *buf) printk("eata_dma: kernel PCI support not enabled. Skipping scan for PCI HBAs.\n"); #else struct pci_dev *dev = NULL; - u32 base, x; + unsigned long base, x; - while ((dev = pci_find_device(PCI_VENDOR_ID_DPT, PCI_DEVICE_ID_DPT, dev)) != NULL) { + while ((dev = pci_get_device(PCI_VENDOR_ID_DPT, PCI_DEVICE_ID_DPT, dev)) != NULL) { DBG(DBG_PROBE && DBG_PCI, printk("eata_pio: find_PCI, HBA at %s\n", pci_name(dev))); if (pci_enable_device(dev)) continue; @@ -927,7 +935,7 @@ static void find_pio_PCI(struct get_conf *buf) * eventually remove it from the EISA and ISA list */ - if (!register_pio_HBA(base, buf)) { + if (!register_pio_HBA(base, buf, dev)) { release_region(base, 9); continue; } @@ -966,7 +974,7 @@ static int eata_pio_detect(struct scsi_host_template *tpnt) for (i = 0; i <= MAXIRQ; i++) if (reg_IRQ[i]) - request_irq(i, do_eata_pio_int_handler, SA_INTERRUPT, "EATA-PIO", NULL); + request_irq(i, do_eata_pio_int_handler, IRQF_DISABLED, "EATA-PIO", NULL); HBA_ptr = first_HBA; @@ -977,12 +985,12 @@ static int eata_pio_detect(struct scsi_host_template *tpnt) printk("Registered HBAs:\n"); printk("HBA no. Boardtype: Revis: EATA: Bus: BaseIO: IRQ: Ch: ID: Pr:" " QS: SG: CPL:\n"); for (i = 1; i <= registered_HBAs; i++) { - printk("scsi%-2d: %.10s v%s 2.0%c %s %#.4x %2d %d %d %c" + printk("scsi%-2d: %.10s v%s 2.0%c %s %#.4lx %2d %d %d %c" " %2d %2d %2d\n", HBA_ptr->host_no, SD(HBA_ptr)->name, SD(HBA_ptr)->revision, SD(HBA_ptr)->EATA_revision, (SD(HBA_ptr)->bustype == 'P') ? "PCI " : (SD(HBA_ptr)->bustype == 'E') ? "EISA" : "ISA ", - (uint) HBA_ptr->base, HBA_ptr->irq, SD(HBA_ptr)->channel, HBA_ptr->this_id, + HBA_ptr->base, HBA_ptr->irq, SD(HBA_ptr)->channel, HBA_ptr->this_id, SD(HBA_ptr)->primary ? 'Y' : 'N', HBA_ptr->can_queue, HBA_ptr->sg_tablesize, HBA_ptr->cmd_per_lun); HBA_ptr = SD(HBA_ptr)->next; diff --git a/drivers/scsi/esp.c b/drivers/scsi/esp.c index 0a3e45d7a97..5630868c1b2 100644 --- a/drivers/scsi/esp.c +++ b/drivers/scsi/esp.c @@ -1,7 +1,6 @@ -/* $Id: esp.c,v 1.101 2002/01/15 06:48:55 davem Exp $ - * esp.c: EnhancedScsiProcessor Sun SCSI driver code. +/* esp.c: ESP Sun SCSI driver. * - * Copyright (C) 1995, 1998 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1995, 1998, 2006 David S. Miller (davem@davemloft.net) */ /* TODO: @@ -13,7 +12,6 @@ * 3) Add tagged queueing. */ -#include <linux/config.h> #include <linux/kernel.h> #include <linux/delay.h> #include <linux/types.h> @@ -185,11 +183,6 @@ enum { /*5*/ do_intr_end }; -/* The master ring of all esp hosts we are managing in this driver. */ -static struct esp *espchain; -static DEFINE_SPINLOCK(espchain_lock); -static int esps_running = 0; - /* Forward declarations. */ static irqreturn_t esp_intr(int irq, void *dev_id, struct pt_regs *pregs); @@ -694,36 +687,6 @@ static void __init esp_bootup_reset(struct esp *esp) sbus_readb(esp->eregs + ESP_INTRPT); } -static void esp_chain_add(struct esp *esp) -{ - spin_lock_irq(&espchain_lock); - if (espchain) { - struct esp *elink = espchain; - while (elink->next) - elink = elink->next; - elink->next = esp; - } else { - espchain = esp; - } - esp->next = NULL; - spin_unlock_irq(&espchain_lock); -} - -static void esp_chain_del(struct esp *esp) -{ - spin_lock_irq(&espchain_lock); - if (espchain == esp) { - espchain = esp->next; - } else { - struct esp *elink = espchain; - while (elink->next != esp) - elink = elink->next; - elink->next = esp->next; - } - esp->next = NULL; - spin_unlock_irq(&espchain_lock); -} - static int __init esp_find_dvma(struct esp *esp, struct sbus_dev *dma_sdev) { struct sbus_dev *sdev = esp->sdev; @@ -815,7 +778,7 @@ static int __init esp_register_irq(struct esp *esp) * sanely maintain. */ if (request_irq(esp->ehost->irq, esp_intr, - SA_SHIRQ, "ESP SCSI", esp)) { + IRQF_SHARED, "ESP SCSI", esp)) { printk("esp%d: Cannot acquire irq line\n", esp->esp_id); return -1; @@ -830,19 +793,20 @@ static int __init esp_register_irq(struct esp *esp) static void __init esp_get_scsi_id(struct esp *esp) { struct sbus_dev *sdev = esp->sdev; + struct device_node *dp = sdev->ofdev.node; - esp->scsi_id = prom_getintdefault(esp->prom_node, - "initiator-id", - -1); + esp->scsi_id = of_getintprop_default(dp, + "initiator-id", + -1); if (esp->scsi_id == -1) - esp->scsi_id = prom_getintdefault(esp->prom_node, - "scsi-initiator-id", - -1); + esp->scsi_id = of_getintprop_default(dp, + "scsi-initiator-id", + -1); if (esp->scsi_id == -1) esp->scsi_id = (sdev->bus == NULL) ? 7 : - prom_getintdefault(sdev->bus->prom_node, - "scsi-initiator-id", - 7); + of_getintprop_default(sdev->bus->ofdev.node, + "scsi-initiator-id", + 7); esp->ehost->this_id = esp->scsi_id; esp->scsi_id_mask = (1 << esp->scsi_id); @@ -1067,28 +1031,30 @@ static void __init esp_init_swstate(struct esp *esp) esp->prev_hme_dmacsr = 0xffffffff; } -static int __init detect_one_esp(struct scsi_host_template *tpnt, struct sbus_dev *esp_dev, - struct sbus_dev *espdma, struct sbus_bus *sbus, - int id, int hme) +static int __init detect_one_esp(struct scsi_host_template *tpnt, + struct device *dev, + struct sbus_dev *esp_dev, + struct sbus_dev *espdma, + struct sbus_bus *sbus, + int hme) { - struct Scsi_Host *esp_host = scsi_register(tpnt, sizeof(struct esp)); + static int instance; + struct Scsi_Host *esp_host = scsi_host_alloc(tpnt, sizeof(struct esp)); struct esp *esp; - if (!esp_host) { - printk("ESP: Cannot register SCSI host\n"); - return -1; - } + if (!esp_host) + return -ENOMEM; + if (hme) esp_host->max_id = 16; esp = (struct esp *) esp_host->hostdata; esp->ehost = esp_host; esp->sdev = esp_dev; - esp->esp_id = id; + esp->esp_id = instance; esp->prom_node = esp_dev->prom_node; prom_getstring(esp->prom_node, "name", esp->prom_name, sizeof(esp->prom_name)); - esp_chain_add(esp); if (esp_find_dvma(esp, espdma) < 0) goto fail_unlink; if (esp_map_regs(esp, hme) < 0) { @@ -1115,8 +1081,19 @@ static int __init detect_one_esp(struct scsi_host_template *tpnt, struct sbus_de esp_bootup_reset(esp); + if (scsi_add_host(esp_host, dev)) + goto fail_free_irq; + + dev_set_drvdata(&esp_dev->ofdev.dev, esp); + + scsi_scan_host(esp_host); + instance++; + return 0; +fail_free_irq: + free_irq(esp->ehost->irq, esp); + fail_unmap_cmdarea: sbus_free_consistent(esp->sdev, 16, (void *) esp->esp_command, @@ -1129,119 +1106,99 @@ fail_dvma_release: esp->dma->allocated = 0; fail_unlink: - esp_chain_del(esp); - scsi_unregister(esp_host); + scsi_host_put(esp_host); return -1; } /* Detecting ESP chips on the machine. This is the simple and easy * version. */ +static int __devexit esp_remove_common(struct esp *esp) +{ + unsigned int irq = esp->ehost->irq; + + scsi_remove_host(esp->ehost); + + ESP_INTSOFF(esp->dregs); +#if 0 + esp_reset_dma(esp); + esp_reset_esp(esp); +#endif + + free_irq(irq, esp); + sbus_free_consistent(esp->sdev, 16, + (void *) esp->esp_command, esp->esp_command_dvma); + sbus_iounmap(esp->eregs, ESP_REG_SIZE); + esp->dma->allocated = 0; + + scsi_host_put(esp->ehost); + + return 0; +} + #ifdef CONFIG_SUN4 #include <asm/sun4paddr.h> -static int __init esp_detect(struct scsi_host_template *tpnt) -{ - static struct sbus_dev esp_dev; - int esps_in_use = 0; - - espchain = NULL; +static struct sbus_dev sun4_esp_dev; +static int __init esp_sun4_probe(struct scsi_host_template *tpnt) +{ if (sun4_esp_physaddr) { - memset (&esp_dev, 0, sizeof(esp_dev)); - esp_dev.reg_addrs[0].phys_addr = sun4_esp_physaddr; - esp_dev.irqs[0] = 4; - esp_dev.resource[0].start = sun4_esp_physaddr; - esp_dev.resource[0].end = sun4_esp_physaddr + ESP_REG_SIZE - 1; - esp_dev.resource[0].flags = IORESOURCE_IO; - - if (!detect_one_esp(tpnt, &esp_dev, NULL, NULL, 0, 0)) - esps_in_use++; - printk("ESP: Total of 1 ESP hosts found, %d actually in use.\n", esps_in_use); - esps_running = esps_in_use; + memset(&sun4_esp_dev, 0, sizeof(sun4_esp_dev)); + sun4_esp_dev.reg_addrs[0].phys_addr = sun4_esp_physaddr; + sun4_esp_dev.irqs[0] = 4; + sun4_esp_dev.resource[0].start = sun4_esp_physaddr; + sun4_esp_dev.resource[0].end = + sun4_esp_physaddr + ESP_REG_SIZE - 1; + sun4_esp_dev.resource[0].flags = IORESOURCE_IO; + + return detect_one_esp(tpnt, NULL, + &sun4_esp_dev, NULL, NULL, 0); } - return esps_in_use; + return 0; } -#else /* !CONFIG_SUN4 */ - -static int __init esp_detect(struct scsi_host_template *tpnt) +static int __devexit esp_sun4_remove(void) { - struct sbus_bus *sbus; - struct sbus_dev *esp_dev, *sbdev_iter; - int nesps = 0, esps_in_use = 0; + struct of_device *dev = &sun4_esp_dev.ofdev; + struct esp *esp = dev_get_drvdata(&dev->dev); - espchain = 0; - if (!sbus_root) { -#ifdef CONFIG_PCI - return 0; -#else - panic("No SBUS in esp_detect()"); -#endif - } - for_each_sbus(sbus) { - for_each_sbusdev(sbdev_iter, sbus) { - struct sbus_dev *espdma = NULL; - int hme = 0; - - /* Is it an esp sbus device? */ - esp_dev = sbdev_iter; - if (strcmp(esp_dev->prom_name, "esp") && - strcmp(esp_dev->prom_name, "SUNW,esp")) { - if (!strcmp(esp_dev->prom_name, "SUNW,fas")) { - hme = 1; - espdma = esp_dev; - } else { - if (!esp_dev->child || - (strcmp(esp_dev->prom_name, "espdma") && - strcmp(esp_dev->prom_name, "dma"))) - continue; /* nope... */ - espdma = esp_dev; - esp_dev = esp_dev->child; - if (strcmp(esp_dev->prom_name, "esp") && - strcmp(esp_dev->prom_name, "SUNW,esp")) - continue; /* how can this happen? */ - } - } - - if (detect_one_esp(tpnt, esp_dev, espdma, sbus, nesps++, hme) < 0) - continue; - - esps_in_use++; - } /* for each sbusdev */ - } /* for each sbus */ - printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, - esps_in_use); - esps_running = esps_in_use; - return esps_in_use; + return esp_remove_common(esp); } -#endif /* !CONFIG_SUN4 */ +#else /* !CONFIG_SUN4 */ -/* - */ -static int esp_release(struct Scsi_Host *host) +static int __devinit esp_sbus_probe(struct of_device *dev, const struct of_device_id *match) { - struct esp *esp = (struct esp *) host->hostdata; + struct sbus_dev *sdev = to_sbus_device(&dev->dev); + struct device_node *dp = dev->node; + struct sbus_dev *dma_sdev = NULL; + int hme = 0; + + if (dp->parent && + (!strcmp(dp->parent->name, "espdma") || + !strcmp(dp->parent->name, "dma"))) + dma_sdev = sdev->parent; + else if (!strcmp(dp->name, "SUNW,fas")) { + dma_sdev = sdev; + hme = 1; + } - ESP_INTSOFF(esp->dregs); -#if 0 - esp_reset_dma(esp); - esp_reset_esp(esp); -#endif + return detect_one_esp(match->data, &dev->dev, + sdev, dma_sdev, sdev->bus, hme); +} - free_irq(esp->ehost->irq, esp); - sbus_free_consistent(esp->sdev, 16, - (void *) esp->esp_command, esp->esp_command_dvma); - sbus_iounmap(esp->eregs, ESP_REG_SIZE); - esp->dma->allocated = 0; - esp_chain_del(esp); +static int __devexit esp_sbus_remove(struct of_device *dev) +{ + struct esp *esp = dev_get_drvdata(&dev->dev); - return 0; + return esp_remove_common(esp); } +#endif /* !CONFIG_SUN4 */ + /* The info function will return whatever useful * information the developer sees fit. If not provided, then * the name field will be used instead. @@ -1415,18 +1372,11 @@ static int esp_host_info(struct esp *esp, char *ptr, off_t offset, int len) static int esp_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length, int inout) { - struct esp *esp; + struct esp *esp = (struct esp *) host->hostdata; if (inout) return -EINVAL; /* not yet */ - for_each_esp(esp) { - if (esp->ehost == host) - break; - } - if (!esp) - return -EINVAL; - if (start) *start = buffer; @@ -1448,7 +1398,7 @@ static void esp_get_dmabufs(struct esp *esp, struct scsi_cmnd *sp) sp->SCp.ptr = NULL; } } else { - sp->SCp.buffer = (struct scatterlist *) sp->buffer; + sp->SCp.buffer = (struct scatterlist *) sp->request_buffer; sp->SCp.buffers_residual = sbus_map_sg(esp->sdev, sp->SCp.buffer, sp->use_sg, @@ -1461,7 +1411,7 @@ static void esp_get_dmabufs(struct esp *esp, struct scsi_cmnd *sp) static void esp_release_dmabufs(struct esp *esp, struct scsi_cmnd *sp) { if (sp->use_sg) { - sbus_unmap_sg(esp->sdev, sp->buffer, sp->use_sg, + sbus_unmap_sg(esp->sdev, sp->request_buffer, sp->use_sg, sp->sc_data_direction); } else if (sp->request_bufflen) { sbus_unmap_single(esp->sdev, @@ -2805,18 +2755,15 @@ static int esp_do_data_finale(struct esp *esp) */ static int esp_should_clear_sync(struct scsi_cmnd *sp) { - u8 cmd1 = sp->cmnd[0]; - u8 cmd2 = sp->data_cmnd[0]; + u8 cmd = sp->cmnd[0]; /* These cases are for spinning up a disk and * waiting for that spinup to complete. */ - if (cmd1 == START_STOP || - cmd2 == START_STOP) + if (cmd == START_STOP) return 0; - if (cmd1 == TEST_UNIT_READY || - cmd2 == TEST_UNIT_READY) + if (cmd == TEST_UNIT_READY) return 0; /* One more special case for SCSI tape drives, @@ -2824,8 +2771,7 @@ static int esp_should_clear_sync(struct scsi_cmnd *sp) * completion of a rewind or tape load operation. */ if (sp->device->type == TYPE_TAPE) { - if (cmd1 == MODE_SENSE || - cmd2 == MODE_SENSE) + if (cmd == MODE_SENSE) return 0; } @@ -4377,15 +4323,12 @@ static void esp_slave_destroy(struct scsi_device *SDptr) SDptr->hostdata = NULL; } -static struct scsi_host_template driver_template = { - .proc_name = "esp", - .proc_info = esp_proc_info, - .name = "Sun ESP 100/100a/200", - .detect = esp_detect, +static struct scsi_host_template esp_template = { + .module = THIS_MODULE, + .name = "esp", + .info = esp_info, .slave_alloc = esp_slave_alloc, .slave_destroy = esp_slave_destroy, - .release = esp_release, - .info = esp_info, .queuecommand = esp_queue, .eh_abort_handler = esp_abort, .eh_bus_reset_handler = esp_reset, @@ -4394,12 +4337,58 @@ static struct scsi_host_template driver_template = { .sg_tablesize = SG_ALL, .cmd_per_lun = 1, .use_clustering = ENABLE_CLUSTERING, + .proc_name = "esp", + .proc_info = esp_proc_info, +}; + +#ifndef CONFIG_SUN4 +static struct of_device_id esp_match[] = { + { + .name = "SUNW,esp", + .data = &esp_template, + }, + { + .name = "SUNW,fas", + .data = &esp_template, + }, + { + .name = "esp", + .data = &esp_template, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, esp_match); + +static struct of_platform_driver esp_sbus_driver = { + .name = "esp", + .match_table = esp_match, + .probe = esp_sbus_probe, + .remove = __devexit_p(esp_sbus_remove), }; +#endif + +static int __init esp_init(void) +{ +#ifdef CONFIG_SUN4 + return esp_sun4_probe(&esp_template); +#else + return of_register_driver(&esp_sbus_driver, &sbus_bus_type); +#endif +} -#include "scsi_module.c" +static void __exit esp_exit(void) +{ +#ifdef CONFIG_SUN4 + esp_sun4_remove(); +#else + of_unregister_driver(&esp_sbus_driver); +#endif +} -MODULE_DESCRIPTION("EnhancedScsiProcessor Sun SCSI driver"); -MODULE_AUTHOR("David S. Miller (davem@redhat.com)"); +MODULE_DESCRIPTION("ESP Sun SCSI driver"); +MODULE_AUTHOR("David S. Miller (davem@davemloft.net)"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); +module_init(esp_init); +module_exit(esp_exit); diff --git a/drivers/scsi/esp.h b/drivers/scsi/esp.h index 73f7d6968ab..a98cda9121f 100644 --- a/drivers/scsi/esp.h +++ b/drivers/scsi/esp.h @@ -403,8 +403,4 @@ struct esp { #define ESP_MHZ_TO_CYCLE(mhertz) ((1000000000) / ((mhertz) / 1000)) #define ESP_TICK(ccf, cycle) ((7682 * (ccf) * (cycle) / 1000)) -/* For our interrupt engine. */ -#define for_each_esp(esp) \ - for((esp) = espchain; (esp); (esp) = (esp)->next) - #endif /* !(_SPARC_ESP_H) */ diff --git a/drivers/scsi/fastlane.c b/drivers/scsi/fastlane.c index 8ae9c406a83..2a1c5c22b9e 100644 --- a/drivers/scsi/fastlane.c +++ b/drivers/scsi/fastlane.c @@ -210,7 +210,7 @@ int __init fastlane_esp_detect(struct scsi_host_template *tpnt) esp->irq = IRQ_AMIGA_PORTS; esp->slot = board+FASTLANE_ESP_ADDR; - if (request_irq(IRQ_AMIGA_PORTS, esp_intr, SA_SHIRQ, + if (request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED, "Fastlane SCSI", esp->ehost)) { printk(KERN_WARNING "Fastlane: Could not get IRQ%d, aborting.\n", IRQ_AMIGA_PORTS); goto err_unmap; diff --git a/drivers/scsi/fcal.c b/drivers/scsi/fcal.c index 03416548f20..c4e16c0775d 100644 --- a/drivers/scsi/fcal.c +++ b/drivers/scsi/fcal.c @@ -13,7 +13,6 @@ #include <linux/proc_fs.h> #include <linux/stat.h> #include <linux/init.h> -#include <linux/config.h> #ifdef CONFIG_KMOD #include <linux/kmod.h> #endif @@ -249,8 +248,7 @@ int fcal_proc_info (struct Scsi_Host *host, char *buffer, char **start, off_t of if (scd->id == target) { SPRINTF (" [AL-PA: %02x, Id: %02d, Port WWN: %08x%08x, Node WWN: %08x%08x] ", alpa, target, u1[0], u1[1], u2[0], u2[1]); - SPRINTF ("%s ", (scd->type < MAX_SCSI_DEVICE_CODE) ? - scsi_device_types[(short) scd->type] : "Unknown device"); + SPRINTF ("%s ", scsi_device_type(scd->type)); for (j = 0; (j < 8) && (scd->vendor[j] >= 0x20); j++) SPRINTF ("%c", scd->vendor[j]); diff --git a/drivers/scsi/fd_mcs.c b/drivers/scsi/fd_mcs.c index 70a1606bd58..dde3edf35c0 100644 --- a/drivers/scsi/fd_mcs.c +++ b/drivers/scsi/fd_mcs.c @@ -400,7 +400,7 @@ static int fd_mcs_detect(struct scsi_host_template * tpnt) mca_set_adapter_name(slot - 1, fd_mcs_adapters[loop].name); /* check irq/region */ - if (request_irq(irq, fd_mcs_intr, SA_SHIRQ, "fd_mcs", hosts)) { + if (request_irq(irq, fd_mcs_intr, IRQF_SHARED, "fd_mcs", hosts)) { printk(KERN_ERR "fd_mcs: interrupt is not available, skipping...\n"); continue; } diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c index e16013f0ad6..b0694dcce24 100644 --- a/drivers/scsi/fdomain.c +++ b/drivers/scsi/fdomain.c @@ -266,7 +266,6 @@ **************************************************************************/ -#include <linux/config.h> #include <linux/module.h> #include <linux/init.h> #include <linux/interrupt.h> @@ -950,7 +949,7 @@ struct Scsi_Host *__fdomain_16x0_detect(struct scsi_host_template *tpnt ) /* Register the IRQ with the kernel */ retcode = request_irq( interrupt_level, - do_fdomain_16x0_intr, pdev?SA_SHIRQ:0, "fdomain", shpnt); + do_fdomain_16x0_intr, pdev?IRQF_SHARED:0, "fdomain", shpnt); if (retcode < 0) { if (retcode == -EINVAL) { diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c index 5f313c93b7a..cdd893bb4e2 100644 --- a/drivers/scsi/g_NCR5380.c +++ b/drivers/scsi/g_NCR5380.c @@ -91,7 +91,6 @@ #define AUTOPROBE_IRQ #define AUTOSENSE -#include <linux/config.h> #ifdef CONFIG_SCSI_GENERIC_NCR53C400 #define NCR53C400_PSEUDO_DMA 1 @@ -462,7 +461,7 @@ int __init generic_NCR5380_detect(struct scsi_host_template * tpnt) instance->irq = NCR5380_probe_irq(instance, 0xffff); if (instance->irq != SCSI_IRQ_NONE) - if (request_irq(instance->irq, generic_NCR5380_intr, SA_INTERRUPT, "NCR5380", instance)) { + if (request_irq(instance->irq, generic_NCR5380_intr, IRQF_DISABLED, "NCR5380", instance)) { printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq); instance->irq = SCSI_IRQ_NONE; } @@ -812,7 +811,6 @@ static int generic_NCR5380_proc_info(struct Scsi_Host *scsi_ptr, char *buffer, c struct NCR5380_hostdata *hostdata; #ifdef NCR5380_STATS struct scsi_device *dev; - extern const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE]; #endif NCR5380_setup(scsi_ptr); @@ -852,7 +850,7 @@ static int generic_NCR5380_proc_info(struct Scsi_Host *scsi_ptr, char *buffer, c long tr = hostdata->time_read[dev->id] / HZ; long tw = hostdata->time_write[dev->id] / HZ; - PRINTP(" T:%d %s " ANDP dev->id ANDP(dev->type < MAX_SCSI_DEVICE_CODE) ? scsi_device_types[(int) dev->type] : "Unknown"); + PRINTP(" T:%d %s " ANDP dev->id ANDP scsi_device_type(dev->type)); for (i = 0; i < 8; i++) if (dev->vendor[i] >= 0x20) *(buffer + (len++)) = dev->vendor[i]; diff --git a/drivers/scsi/g_NCR5380.h b/drivers/scsi/g_NCR5380.h index d60a89cb805..df0b3f69ef6 100644 --- a/drivers/scsi/g_NCR5380.h +++ b/drivers/scsi/g_NCR5380.h @@ -32,7 +32,6 @@ #ifndef GENERIC_NCR5380_H #define GENERIC_NCR5380_H -#include <linux/config.h> #define GENERIC_NCR5380_PUBLIC_RELEASE 1 diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index 76071a15830..43afd476e60 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -4350,7 +4350,7 @@ static int __init gdth_detect(Scsi_Host_Template *shtp) printk("Configuring GDT-ISA HA at BIOS 0x%05X IRQ %u DRQ %u\n", isa_bios,ha->irq,ha->drq); - if (request_irq(ha->irq,gdth_interrupt,SA_INTERRUPT,"gdth",ha)) { + if (request_irq(ha->irq,gdth_interrupt,IRQF_DISABLED,"gdth",ha)) { printk("GDT-ISA: Unable to allocate IRQ\n"); scsi_unregister(shp); continue; @@ -4476,7 +4476,7 @@ static int __init gdth_detect(Scsi_Host_Template *shtp) printk("Configuring GDT-EISA HA at Slot %d IRQ %u\n", eisa_slot>>12,ha->irq); - if (request_irq(ha->irq,gdth_interrupt,SA_INTERRUPT,"gdth",ha)) { + if (request_irq(ha->irq,gdth_interrupt,IRQF_DISABLED,"gdth",ha)) { printk("GDT-EISA: Unable to allocate IRQ\n"); scsi_unregister(shp); continue; @@ -4603,7 +4603,7 @@ static int __init gdth_detect(Scsi_Host_Template *shtp) pcistr[ctr].bus,PCI_SLOT(pcistr[ctr].device_fn),ha->irq); if (request_irq(ha->irq, gdth_interrupt, - SA_INTERRUPT|SA_SHIRQ, "gdth", ha)) + IRQF_DISABLED|IRQF_SHARED, "gdth", ha)) { printk("GDT-PCI: Unable to allocate IRQ\n"); scsi_unregister(shp); diff --git a/drivers/scsi/gvp11.c b/drivers/scsi/gvp11.c index 5b154498056..18dbe5c27da 100644 --- a/drivers/scsi/gvp11.c +++ b/drivers/scsi/gvp11.c @@ -47,7 +47,7 @@ void gvp11_setup (char *str, int *ints) gvp11_xfer_mask = ints[1]; } -static int dma_setup (Scsi_Cmnd *cmd, int dir_in) +static int dma_setup(struct scsi_cmnd *cmd, int dir_in) { unsigned short cntr = GVP11_DMAC_INT_ENABLE; unsigned long addr = virt_to_bus(cmd->SCp.ptr); @@ -142,8 +142,8 @@ static int dma_setup (Scsi_Cmnd *cmd, int dir_in) return 0; } -static void dma_stop (struct Scsi_Host *instance, Scsi_Cmnd *SCpnt, - int status) +static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, + int status) { /* stop DMA */ DMA(instance)->SP_DMA = 1; @@ -328,7 +328,7 @@ int __init gvp11_detect(struct scsi_host_template *tpnt) (epc & GVP_SCSICLKMASK) ? WD33C93_FS_8_10 : WD33C93_FS_12_15); - request_irq(IRQ_AMIGA_PORTS, gvp11_intr, SA_SHIRQ, "GVP11 SCSI", + request_irq(IRQ_AMIGA_PORTS, gvp11_intr, IRQF_SHARED, "GVP11 SCSI", instance); DMA(instance)->CNTR = GVP11_DMAC_INT_ENABLE; num_gvp11++; @@ -341,7 +341,7 @@ release: return num_gvp11; } -static int gvp11_bus_reset(Scsi_Cmnd *cmd) +static int gvp11_bus_reset(struct scsi_cmnd *cmd) { /* FIXME perform bus-specific reset */ diff --git a/drivers/scsi/gvp11.h b/drivers/scsi/gvp11.h index 575d219d14b..bf22859a503 100644 --- a/drivers/scsi/gvp11.h +++ b/drivers/scsi/gvp11.h @@ -13,10 +13,6 @@ int gvp11_detect(struct scsi_host_template *); int gvp11_release(struct Scsi_Host *); -const char *wd33c93_info(void); -int wd33c93_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *)); -int wd33c93_abort(Scsi_Cmnd *); -int wd33c93_reset(Scsi_Cmnd *, unsigned int); #ifndef CMD_PER_LUN #define CMD_PER_LUN 2 diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index dfcb96f3e60..68ef1636678 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -265,6 +265,9 @@ static void scsi_host_dev_release(struct device *dev) destroy_workqueue(shost->work_q); scsi_destroy_command_freelist(shost); + if (shost->bqt) + blk_free_tags(shost->bqt); + kfree(shost->shost_data); if (parent) @@ -487,7 +490,9 @@ EXPORT_SYMBOL(scsi_is_host_device); * @work: Work to queue for execution. * * Return value: - * 0 on success / != 0 for error + * 1 - work queued for execution + * 0 - work is already queued + * -EINVAL - work queue doesn't exist **/ int scsi_queue_work(struct Scsi_Host *shost, struct work_struct *work) { diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c index f77808329e7..28bfb8f9f81 100644 --- a/drivers/scsi/hptiop.c +++ b/drivers/scsi/hptiop.c @@ -15,7 +15,6 @@ * * For more information, visit http://www.highpoint-tech.com */ -#include <linux/config.h> #include <linux/module.h> #include <linux/types.h> #include <linux/string.h> @@ -45,10 +44,6 @@ static char driver_name[] = "hptiop"; static const char driver_name_long[] = "RocketRAID 3xxx SATA Controller driver"; static const char driver_ver[] = "v1.0 (060426)"; -static DEFINE_SPINLOCK(hptiop_hba_list_lock); -static LIST_HEAD(hptiop_hba_list); -static int hptiop_cdev_major = -1; - static void hptiop_host_request_callback(struct hptiop_hba *hba, u32 tag); static void hptiop_iop_request_callback(struct hptiop_hba *hba, u32 tag); static void hptiop_message_callback(struct hptiop_hba *hba, u32 msg); @@ -577,7 +572,7 @@ static int hptiop_reset_hba(struct hptiop_hba *hba) if (atomic_xchg(&hba->resetting, 1) == 0) { atomic_inc(&hba->reset_count); writel(IOPMU_INBOUND_MSG0_RESET, - &hba->iop->outbound_msgaddr0); + &hba->iop->inbound_msgaddr0); hptiop_pci_posting_flush(hba->iop); } @@ -620,532 +615,11 @@ static int hptiop_adjust_disk_queue_depth(struct scsi_device *sdev, return queue_depth; } -struct hptiop_getinfo { - char __user *buffer; - loff_t buflength; - loff_t bufoffset; - loff_t buffillen; - loff_t filpos; -}; - -static void hptiop_copy_mem_info(struct hptiop_getinfo *pinfo, - char *data, int datalen) -{ - if (pinfo->filpos < pinfo->bufoffset) { - if (pinfo->filpos + datalen <= pinfo->bufoffset) { - pinfo->filpos += datalen; - return; - } else { - data += (pinfo->bufoffset - pinfo->filpos); - datalen -= (pinfo->bufoffset - pinfo->filpos); - pinfo->filpos = pinfo->bufoffset; - } - } - - pinfo->filpos += datalen; - if (pinfo->buffillen == pinfo->buflength) - return; - - if (pinfo->buflength - pinfo->buffillen < datalen) - datalen = pinfo->buflength - pinfo->buffillen; - - if (copy_to_user(pinfo->buffer + pinfo->buffillen, data, datalen)) - return; - - pinfo->buffillen += datalen; -} - -static int hptiop_copy_info(struct hptiop_getinfo *pinfo, char *fmt, ...) -{ - va_list args; - char buf[128]; - int len; - - va_start(args, fmt); - len = vsnprintf(buf, sizeof(buf), fmt, args); - va_end(args); - hptiop_copy_mem_info(pinfo, buf, len); - return len; -} - -static void hptiop_ioctl_done(struct hpt_ioctl_k *arg) -{ - arg->done = NULL; - wake_up(&arg->hba->ioctl_wq); -} - -static void hptiop_do_ioctl(struct hpt_ioctl_k *arg) -{ - struct hptiop_hba *hba = arg->hba; - u32 val; - struct hpt_iop_request_ioctl_command __iomem *req; - int ioctl_retry = 0; - - dprintk("scsi%d: hptiop_do_ioctl\n", hba->host->host_no); - - /* - * check (in + out) buff size from application. - * outbuf must be dword aligned. - */ - if (((arg->inbuf_size + 3) & ~3) + arg->outbuf_size > - hba->max_request_size - - sizeof(struct hpt_iop_request_header) - - 4 * sizeof(u32)) { - dprintk("scsi%d: ioctl buf size (%d/%d) is too large\n", - hba->host->host_no, - arg->inbuf_size, arg->outbuf_size); - arg->result = HPT_IOCTL_RESULT_FAILED; - return; - } - -retry: - spin_lock_irq(hba->host->host_lock); - - val = readl(&hba->iop->inbound_queue); - if (val == IOPMU_QUEUE_EMPTY) { - spin_unlock_irq(hba->host->host_lock); - dprintk("scsi%d: no free req for ioctl\n", hba->host->host_no); - arg->result = -1; - return; - } - - req = (struct hpt_iop_request_ioctl_command __iomem *) - ((unsigned long)hba->iop + val); - - writel(HPT_CTL_CODE_LINUX_TO_IOP(arg->ioctl_code), - &req->ioctl_code); - writel(arg->inbuf_size, &req->inbuf_size); - writel(arg->outbuf_size, &req->outbuf_size); - - /* - * use the buffer on the IOP local memory first, then copy it - * back to host. - * the caller's request buffer shoudl be little-endian. - */ - if (arg->inbuf_size) - memcpy_toio(req->buf, arg->inbuf, arg->inbuf_size); - - /* correct the controller ID for IOP */ - if ((arg->ioctl_code == HPT_IOCTL_GET_CHANNEL_INFO || - arg->ioctl_code == HPT_IOCTL_GET_CONTROLLER_INFO_V2 || - arg->ioctl_code == HPT_IOCTL_GET_CONTROLLER_INFO) - && arg->inbuf_size >= sizeof(u32)) - writel(0, req->buf); - - writel(IOP_REQUEST_TYPE_IOCTL_COMMAND, &req->header.type); - writel(0, &req->header.flags); - writel(offsetof(struct hpt_iop_request_ioctl_command, buf) - + arg->inbuf_size, &req->header.size); - writel((u32)(unsigned long)arg, &req->header.context); - writel(BITS_PER_LONG > 32 ? (u32)((unsigned long)arg>>32) : 0, - &req->header.context_hi32); - writel(IOP_RESULT_PENDING, &req->header.result); - - arg->result = HPT_IOCTL_RESULT_FAILED; - arg->done = hptiop_ioctl_done; - - writel(val, &hba->iop->inbound_queue); - hptiop_pci_posting_flush(hba->iop); - - spin_unlock_irq(hba->host->host_lock); - - wait_event_timeout(hba->ioctl_wq, arg->done == NULL, 60 * HZ); - - if (arg->done != NULL) { - hptiop_reset_hba(hba); - if (ioctl_retry++ < 3) - goto retry; - } - - dprintk("hpt_iop_ioctl %x result %d\n", - arg->ioctl_code, arg->result); -} - -static int __hpt_do_ioctl(struct hptiop_hba *hba, u32 code, void *inbuf, - u32 insize, void *outbuf, u32 outsize) -{ - struct hpt_ioctl_k arg; - arg.hba = hba; - arg.ioctl_code = code; - arg.inbuf = inbuf; - arg.outbuf = outbuf; - arg.inbuf_size = insize; - arg.outbuf_size = outsize; - arg.bytes_returned = NULL; - hptiop_do_ioctl(&arg); - return arg.result; -} - -static inline int hpt_id_valid(__le32 id) -{ - return id != 0 && id != cpu_to_le32(0xffffffff); -} - -static int hptiop_get_controller_info(struct hptiop_hba *hba, - struct hpt_controller_info *pinfo) -{ - int id = 0; - - return __hpt_do_ioctl(hba, HPT_IOCTL_GET_CONTROLLER_INFO, - &id, sizeof(int), pinfo, sizeof(*pinfo)); -} - - -static int hptiop_get_channel_info(struct hptiop_hba *hba, int bus, - struct hpt_channel_info *pinfo) -{ - u32 ids[2]; - - ids[0] = 0; - ids[1] = bus; - return __hpt_do_ioctl(hba, HPT_IOCTL_GET_CHANNEL_INFO, - ids, sizeof(ids), pinfo, sizeof(*pinfo)); - -} - -static int hptiop_get_logical_devices(struct hptiop_hba *hba, - __le32 *pids, int maxcount) -{ - int i; - u32 count = maxcount - 1; - - if (__hpt_do_ioctl(hba, HPT_IOCTL_GET_LOGICAL_DEVICES, - &count, sizeof(u32), - pids, sizeof(u32) * maxcount)) - return -1; - - maxcount = le32_to_cpu(pids[0]); - for (i = 0; i < maxcount; i++) - pids[i] = pids[i+1]; - - return maxcount; -} - -static int hptiop_get_device_info_v3(struct hptiop_hba *hba, __le32 id, - struct hpt_logical_device_info_v3 *pinfo) -{ - return __hpt_do_ioctl(hba, HPT_IOCTL_GET_DEVICE_INFO_V3, - &id, sizeof(u32), - pinfo, sizeof(*pinfo)); -} - -static const char *get_array_status(struct hpt_logical_device_info_v3 *devinfo) -{ - static char s[64]; - u32 flags = le32_to_cpu(devinfo->u.array.flags); - u32 trans_prog = le32_to_cpu(devinfo->u.array.transforming_progress); - u32 reb_prog = le32_to_cpu(devinfo->u.array.rebuilding_progress); - - if (flags & ARRAY_FLAG_DISABLED) - return "Disabled"; - else if (flags & ARRAY_FLAG_TRANSFORMING) - sprintf(s, "Expanding/Migrating %d.%d%%%s%s", - trans_prog / 100, - trans_prog % 100, - (flags & (ARRAY_FLAG_NEEDBUILDING|ARRAY_FLAG_BROKEN))? - ", Critical" : "", - ((flags & ARRAY_FLAG_NEEDINITIALIZING) && - !(flags & ARRAY_FLAG_REBUILDING) && - !(flags & ARRAY_FLAG_INITIALIZING))? - ", Unintialized" : ""); - else if ((flags & ARRAY_FLAG_BROKEN) && - devinfo->u.array.array_type != AT_RAID6) - return "Critical"; - else if (flags & ARRAY_FLAG_REBUILDING) - sprintf(s, - (flags & ARRAY_FLAG_NEEDINITIALIZING)? - "%sBackground initializing %d.%d%%" : - "%sRebuilding %d.%d%%", - (flags & ARRAY_FLAG_BROKEN)? "Critical, " : "", - reb_prog / 100, - reb_prog % 100); - else if (flags & ARRAY_FLAG_VERIFYING) - sprintf(s, "%sVerifying %d.%d%%", - (flags & ARRAY_FLAG_BROKEN)? "Critical, " : "", - reb_prog / 100, - reb_prog % 100); - else if (flags & ARRAY_FLAG_INITIALIZING) - sprintf(s, "%sForground initializing %d.%d%%", - (flags & ARRAY_FLAG_BROKEN)? "Critical, " : "", - reb_prog / 100, - reb_prog % 100); - else if (flags & ARRAY_FLAG_NEEDTRANSFORM) - sprintf(s,"%s%s%s", "Need Expanding/Migrating", - (flags & ARRAY_FLAG_BROKEN)? "Critical, " : "", - ((flags & ARRAY_FLAG_NEEDINITIALIZING) && - !(flags & ARRAY_FLAG_REBUILDING) && - !(flags & ARRAY_FLAG_INITIALIZING))? - ", Unintialized" : ""); - else if (flags & ARRAY_FLAG_NEEDINITIALIZING && - !(flags & ARRAY_FLAG_REBUILDING) && - !(flags & ARRAY_FLAG_INITIALIZING)) - sprintf(s,"%sUninitialized", - (flags & ARRAY_FLAG_BROKEN)? "Critical, " : ""); - else if ((flags & ARRAY_FLAG_NEEDBUILDING) || - (flags & ARRAY_FLAG_BROKEN)) - return "Critical"; - else - return "Normal"; - return s; -} - -static void hptiop_dump_devinfo(struct hptiop_hba *hba, - struct hptiop_getinfo *pinfo, __le32 id, int indent) -{ - struct hpt_logical_device_info_v3 devinfo; - int i; - u64 capacity; - - for (i = 0; i < indent; i++) - hptiop_copy_info(pinfo, "\t"); - - if (hptiop_get_device_info_v3(hba, id, &devinfo)) { - hptiop_copy_info(pinfo, "unknown\n"); - return; - } - - switch (devinfo.type) { - - case LDT_DEVICE: { - struct hd_driveid *driveid; - u32 flags = le32_to_cpu(devinfo.u.device.flags); - - driveid = (struct hd_driveid *)devinfo.u.device.ident; - /* model[] is 40 chars long, but we just want 20 chars here */ - driveid->model[20] = 0; - - if (indent) - if (flags & DEVICE_FLAG_DISABLED) - hptiop_copy_info(pinfo,"Missing\n"); - else - hptiop_copy_info(pinfo, "CH%d %s\n", - devinfo.u.device.path_id + 1, - driveid->model); - else { - capacity = le64_to_cpu(devinfo.capacity) * 512; - do_div(capacity, 1000000); - hptiop_copy_info(pinfo, - "CH%d %s, %lluMB, %s %s%s%s%s\n", - devinfo.u.device.path_id + 1, - driveid->model, - capacity, - (flags & DEVICE_FLAG_DISABLED)? - "Disabled" : "Normal", - devinfo.u.device.read_ahead_enabled? - "[RA]" : "", - devinfo.u.device.write_cache_enabled? - "[WC]" : "", - devinfo.u.device.TCQ_enabled? - "[TCQ]" : "", - devinfo.u.device.NCQ_enabled? - "[NCQ]" : "" - ); - } - break; - } - - case LDT_ARRAY: - if (devinfo.target_id != INVALID_TARGET_ID) - hptiop_copy_info(pinfo, "[DISK %d_%d] ", - devinfo.vbus_id, devinfo.target_id); - - capacity = le64_to_cpu(devinfo.capacity) * 512; - do_div(capacity, 1000000); - hptiop_copy_info(pinfo, "%s (%s), %lluMB, %s\n", - devinfo.u.array.name, - devinfo.u.array.array_type==AT_RAID0? "RAID0" : - devinfo.u.array.array_type==AT_RAID1? "RAID1" : - devinfo.u.array.array_type==AT_RAID5? "RAID5" : - devinfo.u.array.array_type==AT_RAID6? "RAID6" : - devinfo.u.array.array_type==AT_JBOD? "JBOD" : - "unknown", - capacity, - get_array_status(&devinfo)); - for (i = 0; i < devinfo.u.array.ndisk; i++) { - if (hpt_id_valid(devinfo.u.array.members[i])) { - if (cpu_to_le16(1<<i) & - devinfo.u.array.critical_members) - hptiop_copy_info(pinfo, "\t*"); - hptiop_dump_devinfo(hba, pinfo, - devinfo.u.array.members[i], indent+1); - } - else - hptiop_copy_info(pinfo, "\tMissing\n"); - } - if (id == devinfo.u.array.transform_source) { - hptiop_copy_info(pinfo, "\tExpanding/Migrating to:\n"); - hptiop_dump_devinfo(hba, pinfo, - devinfo.u.array.transform_target, indent+1); - } - break; - } -} - static ssize_t hptiop_show_version(struct class_device *class_dev, char *buf) { return snprintf(buf, PAGE_SIZE, "%s\n", driver_ver); } -static ssize_t hptiop_cdev_read(struct file *filp, char __user *buf, - size_t count, loff_t *ppos) -{ - struct hptiop_hba *hba = filp->private_data; - struct hptiop_getinfo info; - int i, j, ndev; - struct hpt_controller_info con_info; - struct hpt_channel_info chan_info; - __le32 ids[32]; - - info.buffer = buf; - info.buflength = count; - info.bufoffset = ppos ? *ppos : 0; - info.filpos = 0; - info.buffillen = 0; - - if (hptiop_get_controller_info(hba, &con_info)) - return -EIO; - - for (i = 0; i < con_info.num_buses; i++) { - if (hptiop_get_channel_info(hba, i, &chan_info) == 0) { - if (hpt_id_valid(chan_info.devices[0])) - hptiop_dump_devinfo(hba, &info, - chan_info.devices[0], 0); - if (hpt_id_valid(chan_info.devices[1])) - hptiop_dump_devinfo(hba, &info, - chan_info.devices[1], 0); - } - } - - ndev = hptiop_get_logical_devices(hba, ids, - sizeof(ids) / sizeof(ids[0])); - - /* - * if hptiop_get_logical_devices fails, ndev==-1 and it just - * output nothing here - */ - for (j = 0; j < ndev; j++) - hptiop_dump_devinfo(hba, &info, ids[j], 0); - - if (ppos) - *ppos += info.buffillen; - - return info.buffillen; -} - -static int hptiop_cdev_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct hptiop_hba *hba = file->private_data; - struct hpt_ioctl_u ioctl_u; - struct hpt_ioctl_k ioctl_k; - u32 bytes_returned; - int err = -EINVAL; - - if (copy_from_user(&ioctl_u, - (void __user *)arg, sizeof(struct hpt_ioctl_u))) - return -EINVAL; - - if (ioctl_u.magic != HPT_IOCTL_MAGIC) - return -EINVAL; - - ioctl_k.ioctl_code = ioctl_u.ioctl_code; - ioctl_k.inbuf = NULL; - ioctl_k.inbuf_size = ioctl_u.inbuf_size; - ioctl_k.outbuf = NULL; - ioctl_k.outbuf_size = ioctl_u.outbuf_size; - ioctl_k.hba = hba; - ioctl_k.bytes_returned = &bytes_returned; - - /* verify user buffer */ - if ((ioctl_k.inbuf_size && !access_ok(VERIFY_READ, - ioctl_u.inbuf, ioctl_k.inbuf_size)) || - (ioctl_k.outbuf_size && !access_ok(VERIFY_WRITE, - ioctl_u.outbuf, ioctl_k.outbuf_size)) || - (ioctl_u.bytes_returned && !access_ok(VERIFY_WRITE, - ioctl_u.bytes_returned, sizeof(u32))) || - ioctl_k.inbuf_size + ioctl_k.outbuf_size > 0x10000) { - - dprintk("scsi%d: got bad user address\n", hba->host->host_no); - return -EINVAL; - } - - /* map buffer to kernel. */ - if (ioctl_k.inbuf_size) { - ioctl_k.inbuf = kmalloc(ioctl_k.inbuf_size, GFP_KERNEL); - if (!ioctl_k.inbuf) { - dprintk("scsi%d: fail to alloc inbuf\n", - hba->host->host_no); - err = -ENOMEM; - goto err_exit; - } - - if (copy_from_user(ioctl_k.inbuf, - ioctl_u.inbuf, ioctl_k.inbuf_size)) { - goto err_exit; - } - } - - if (ioctl_k.outbuf_size) { - ioctl_k.outbuf = kmalloc(ioctl_k.outbuf_size, GFP_KERNEL); - if (!ioctl_k.outbuf) { - dprintk("scsi%d: fail to alloc outbuf\n", - hba->host->host_no); - err = -ENOMEM; - goto err_exit; - } - } - - hptiop_do_ioctl(&ioctl_k); - - if (ioctl_k.result == HPT_IOCTL_RESULT_OK) { - if (ioctl_k.outbuf_size && - copy_to_user(ioctl_u.outbuf, - ioctl_k.outbuf, ioctl_k.outbuf_size)) - goto err_exit; - - if (ioctl_u.bytes_returned && - copy_to_user(ioctl_u.bytes_returned, - &bytes_returned, sizeof(u32))) - goto err_exit; - - err = 0; - } - -err_exit: - kfree(ioctl_k.inbuf); - kfree(ioctl_k.outbuf); - - return err; -} - -static int hptiop_cdev_open(struct inode *inode, struct file *file) -{ - struct hptiop_hba *hba; - unsigned i = 0, minor = iminor(inode); - int ret = -ENODEV; - - spin_lock(&hptiop_hba_list_lock); - list_for_each_entry(hba, &hptiop_hba_list, link) { - if (i == minor) { - file->private_data = hba; - ret = 0; - goto out; - } - i++; - } - -out: - spin_unlock(&hptiop_hba_list_lock); - return ret; -} - -static struct file_operations hptiop_cdev_fops = { - .owner = THIS_MODULE, - .read = hptiop_cdev_read, - .ioctl = hptiop_cdev_ioctl, - .open = hptiop_cdev_open, -}; - static ssize_t hptiop_show_fw_version(struct class_device *class_dev, char *buf) { struct Scsi_Host *host = class_to_shost(class_dev); @@ -1296,19 +770,13 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev, goto unmap_pci_bar; } - if (scsi_add_host(host, &pcidev->dev)) { - printk(KERN_ERR "scsi%d: scsi_add_host failed\n", - hba->host->host_no); - goto unmap_pci_bar; - } - pci_set_drvdata(pcidev, host); - if (request_irq(pcidev->irq, hptiop_intr, SA_SHIRQ, + if (request_irq(pcidev->irq, hptiop_intr, IRQF_SHARED, driver_name, hba)) { printk(KERN_ERR "scsi%d: request irq %d failed\n", hba->host->host_no, pcidev->irq); - goto remove_scsi_host; + goto unmap_pci_bar; } /* Allocate request mem */ @@ -1355,9 +823,12 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev, if (hptiop_initialize_iop(hba)) goto free_request_mem; - spin_lock(&hptiop_hba_list_lock); - list_add_tail(&hba->link, &hptiop_hba_list); - spin_unlock(&hptiop_hba_list_lock); + if (scsi_add_host(host, &pcidev->dev)) { + printk(KERN_ERR "scsi%d: scsi_add_host failed\n", + hba->host->host_no); + goto free_request_mem; + } + scsi_scan_host(host); @@ -1372,9 +843,6 @@ free_request_mem: free_request_irq: free_irq(hba->pcidev->irq, hba); -remove_scsi_host: - scsi_remove_host(host); - unmap_pci_bar: iounmap(hba->iop); @@ -1422,10 +890,6 @@ static void hptiop_remove(struct pci_dev *pcidev) scsi_remove_host(host); - spin_lock(&hptiop_hba_list_lock); - list_del_init(&hba->link); - spin_unlock(&hptiop_hba_list_lock); - hptiop_shutdown(pcidev); free_irq(hba->pcidev->irq, hba); @@ -1462,27 +926,12 @@ static struct pci_driver hptiop_pci_driver = { static int __init hptiop_module_init(void) { - int error; - printk(KERN_INFO "%s %s\n", driver_name_long, driver_ver); - - error = pci_register_driver(&hptiop_pci_driver); - if (error < 0) - return error; - - hptiop_cdev_major = register_chrdev(0, "hptiop", &hptiop_cdev_fops); - if (hptiop_cdev_major < 0) { - printk(KERN_WARNING "unable to register hptiop device.\n"); - return hptiop_cdev_major; - } - - return 0; + return pci_register_driver(&hptiop_pci_driver); } static void __exit hptiop_module_exit(void) { - dprintk("hptiop_module_exit\n"); - unregister_chrdev(hptiop_cdev_major, "hptiop"); pci_unregister_driver(&hptiop_pci_driver); } diff --git a/drivers/scsi/ibmmca.c b/drivers/scsi/ibmmca.c index 115f55471ed..2be1dc5d852 100644 --- a/drivers/scsi/ibmmca.c +++ b/drivers/scsi/ibmmca.c @@ -17,7 +17,6 @@ */ -#include <linux/config.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/types.h> @@ -760,7 +759,7 @@ static int device_inquiry(int host_index, int ldn) while (!got_interrupt(host_index)) barrier(); - /*if command succesful, break */ + /*if command successful, break */ if ((stat_result(host_index) == IM_SCB_CMD_COMPLETED) || (stat_result(host_index) == IM_SCB_CMD_COMPLETED_WITH_RETRIES)) return 1; } @@ -885,7 +884,7 @@ static int immediate_assign(int host_index, unsigned int pun, unsigned int lun, while (!got_interrupt(host_index)) barrier(); - /*if command succesful, break */ + /*if command successful, break */ if (stat_result(host_index) == IM_IMMEDIATE_CMD_COMPLETED) return 1; } @@ -921,7 +920,7 @@ static int immediate_feature(int host_index, unsigned int speed, unsigned int ti return 2; } else global_command_error_excuse = 0; - /*if command succesful, break */ + /*if command successful, break */ if (stat_result(host_index) == IM_IMMEDIATE_CMD_COMPLETED) return 1; } @@ -959,7 +958,7 @@ static int immediate_reset(int host_index, unsigned int ldn) /* did not work, finish */ return 1; } - /*if command succesful, break */ + /*if command successful, break */ if (stat_result(host_index) == IM_IMMEDIATE_CMD_COMPLETED) return 1; } @@ -1511,7 +1510,7 @@ int ibmmca_detect(struct scsi_host_template * scsi_template) #endif /* get interrupt request level */ - if (request_irq(IM_IRQ, interrupt_handler, SA_SHIRQ, "ibmmcascsi", hosts)) { + if (request_irq(IM_IRQ, interrupt_handler, IRQF_SHARED, "ibmmcascsi", hosts)) { printk(KERN_ERR "IBM MCA SCSI: Unable to get shared IRQ %d.\n", IM_IRQ); return 0; } else @@ -1636,7 +1635,7 @@ int ibmmca_detect(struct scsi_host_template * scsi_template) /* IRQ11 is used by SCSI-2 F/W Adapter/A */ printk(KERN_DEBUG "IBM MCA SCSI: SCSI-2 F/W adapter needs IRQ 11.\n"); /* get interrupt request level */ - if (request_irq(IM_IRQ_FW, interrupt_handler, SA_SHIRQ, "ibmmcascsi", hosts)) { + if (request_irq(IM_IRQ_FW, interrupt_handler, IRQF_SHARED, "ibmmcascsi", hosts)) { printk(KERN_ERR "IBM MCA SCSI: Unable to get shared IRQ %d.\n", IM_IRQ_FW); } else IRQ11_registered++; @@ -1697,7 +1696,7 @@ int ibmmca_detect(struct scsi_host_template * scsi_template) /* IRQ11 is used by SCSI-2 F/W Adapter/A */ printk(KERN_DEBUG "IBM MCA SCSI: SCSI-2 F/W adapter needs IRQ 11.\n"); /* get interrupt request level */ - if (request_irq(IM_IRQ_FW, interrupt_handler, SA_SHIRQ, "ibmmcascsi", hosts)) + if (request_irq(IM_IRQ_FW, interrupt_handler, IRQF_SHARED, "ibmmcascsi", hosts)) printk(KERN_ERR "IBM MCA SCSI: Unable to get shared IRQ %d.\n", IM_IRQ_FW); else IRQ11_registered++; diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index 944fc1203eb..669ea4fff16 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -535,6 +535,7 @@ static int ibmvscsi_send_srp_event(struct srp_event_struct *evt_struct, struct ibmvscsi_host_data *hostdata) { u64 *crq_as_u64 = (u64 *) &evt_struct->crq; + int request_status; int rc; /* If we have exhausted our request limit, just fail this request. @@ -542,9 +543,18 @@ static int ibmvscsi_send_srp_event(struct srp_event_struct *evt_struct, * (such as task management requests) that the mid layer may think we * can handle more requests (can_queue) when we actually can't */ - if ((evt_struct->crq.format == VIOSRP_SRP_FORMAT) && - (atomic_dec_if_positive(&hostdata->request_limit) < 0)) - goto send_error; + if (evt_struct->crq.format == VIOSRP_SRP_FORMAT) { + request_status = + atomic_dec_if_positive(&hostdata->request_limit); + /* If request limit was -1 when we started, it is now even + * less than that + */ + if (request_status < -1) + goto send_error; + /* Otherwise, if we have run out of requests */ + else if (request_status < 0) + goto send_busy; + } /* Copy the IU into the transfer area */ *evt_struct->xfer_iu = evt_struct->iu; @@ -567,11 +577,23 @@ static int ibmvscsi_send_srp_event(struct srp_event_struct *evt_struct, return 0; - send_error: + send_busy: unmap_cmd_data(&evt_struct->iu.srp.cmd, evt_struct, hostdata->dev); free_event_struct(&hostdata->pool, evt_struct); return SCSI_MLQUEUE_HOST_BUSY; + + send_error: + unmap_cmd_data(&evt_struct->iu.srp.cmd, evt_struct, hostdata->dev); + + if (evt_struct->cmnd != NULL) { + evt_struct->cmnd->result = DID_ERROR << 16; + evt_struct->cmnd_done(evt_struct->cmnd); + } else if (evt_struct->done) + evt_struct->done(evt_struct); + + free_event_struct(&hostdata->pool, evt_struct); + return 0; } /** @@ -1184,27 +1206,37 @@ void ibmvscsi_handle_crq(struct viosrp_crq *crq, return; case 0xFF: /* Hypervisor telling us the connection is closed */ scsi_block_requests(hostdata->host); + atomic_set(&hostdata->request_limit, 0); if (crq->format == 0x06) { /* We need to re-setup the interpartition connection */ printk(KERN_INFO "ibmvscsi: Re-enabling adapter!\n"); - atomic_set(&hostdata->request_limit, -1); purge_requests(hostdata, DID_REQUEUE); - if (ibmvscsi_reenable_crq_queue(&hostdata->queue, - hostdata) == 0) - if (ibmvscsi_send_crq(hostdata, - 0xC001000000000000LL, 0)) + if ((ibmvscsi_reenable_crq_queue(&hostdata->queue, + hostdata) == 0) || + (ibmvscsi_send_crq(hostdata, + 0xC001000000000000LL, 0))) { + atomic_set(&hostdata->request_limit, + -1); printk(KERN_ERR - "ibmvscsi: transmit error after" + "ibmvscsi: error after" " enable\n"); + } } else { printk(KERN_INFO "ibmvscsi: Virtual adapter failed rc %d!\n", crq->format); - atomic_set(&hostdata->request_limit, -1); purge_requests(hostdata, DID_ERROR); - ibmvscsi_reset_crq_queue(&hostdata->queue, hostdata); + if ((ibmvscsi_reset_crq_queue(&hostdata->queue, + hostdata)) || + (ibmvscsi_send_crq(hostdata, + 0xC001000000000000LL, 0))) { + atomic_set(&hostdata->request_limit, + -1); + printk(KERN_ERR + "ibmvscsi: error after reset\n"); + } } scsi_unblock_requests(hostdata->host); return; @@ -1467,6 +1499,7 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id) struct Scsi_Host *host; struct device *dev = &vdev->dev; unsigned long wait_switch = 0; + int rc; vdev->dev.driver_data = NULL; @@ -1484,8 +1517,8 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id) atomic_set(&hostdata->request_limit, -1); hostdata->host->max_sectors = 32 * 8; /* default max I/O 32 pages */ - if (ibmvscsi_init_crq_queue(&hostdata->queue, hostdata, - max_requests) != 0) { + rc = ibmvscsi_init_crq_queue(&hostdata->queue, hostdata, max_requests); + if (rc != 0 && rc != H_RESOURCE) { printk(KERN_ERR "ibmvscsi: couldn't initialize crq\n"); goto init_crq_failed; } @@ -1505,7 +1538,8 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id) * to fail if the other end is not acive. In that case we don't * want to scan */ - if (ibmvscsi_send_crq(hostdata, 0xC001000000000000LL, 0) == 0) { + if (ibmvscsi_send_crq(hostdata, 0xC001000000000000LL, 0) == 0 + || rc == H_RESOURCE) { /* * Wait around max init_timeout secs for the adapter to finish * initializing. When we are done initializing, we will have a diff --git a/drivers/scsi/ibmvscsi/iseries_vscsi.c b/drivers/scsi/ibmvscsi/iseries_vscsi.c index 7eed0b09817..6aeb5f003c3 100644 --- a/drivers/scsi/ibmvscsi/iseries_vscsi.c +++ b/drivers/scsi/ibmvscsi/iseries_vscsi.c @@ -81,7 +81,7 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue, int rc; single_host_data = hostdata; - rc = viopath_open(viopath_hostLp, viomajorsubtype_scsi, 0); + rc = viopath_open(viopath_hostLp, viomajorsubtype_scsi, max_requests); if (rc < 0) { printk("viopath_open failed with rc %d in open_event_path\n", rc); diff --git a/drivers/scsi/ibmvscsi/rpa_vscsi.c b/drivers/scsi/ibmvscsi/rpa_vscsi.c index 1a9992bdfef..01b8ac641eb 100644 --- a/drivers/scsi/ibmvscsi/rpa_vscsi.c +++ b/drivers/scsi/ibmvscsi/rpa_vscsi.c @@ -156,8 +156,8 @@ static void gather_partition_info(void) { struct device_node *rootdn; - char *ppartition_name; - unsigned int *p_number_ptr; + const char *ppartition_name; + const unsigned int *p_number_ptr; /* Retrieve information about this partition */ rootdn = find_path_device("/"); @@ -165,14 +165,11 @@ static void gather_partition_info(void) return; } - ppartition_name = - get_property(rootdn, "ibm,partition-name", NULL); + ppartition_name = get_property(rootdn, "ibm,partition-name", NULL); if (ppartition_name) strncpy(partition_name, ppartition_name, sizeof(partition_name)); - p_number_ptr = - (unsigned int *)get_property(rootdn, "ibm,partition-no", - NULL); + p_number_ptr = get_property(rootdn, "ibm,partition-no", NULL); if (p_number_ptr) partition_number = *p_number_ptr; } @@ -208,6 +205,7 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue, int max_requests) { int rc; + int retrc; struct vio_dev *vdev = to_vio_dev(hostdata->dev); queue->msgs = (struct viosrp_crq *)get_zeroed_page(GFP_KERNEL); @@ -226,7 +224,7 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue, gather_partition_info(); set_adapter_info(hostdata); - rc = plpar_hcall_norets(H_REG_CRQ, + retrc = rc = plpar_hcall_norets(H_REG_CRQ, vdev->unit_address, queue->msg_token, PAGE_SIZE); if (rc == H_RESOURCE) @@ -237,6 +235,7 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue, if (rc == 2) { /* Adapter is good, but other end is not ready */ printk(KERN_WARNING "ibmvscsi: Partner adapter not ready\n"); + retrc = 0; } else if (rc != 0) { printk(KERN_WARNING "ibmvscsi: Error %d opening adapter\n", rc); goto reg_crq_failed; @@ -263,7 +262,7 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue, tasklet_init(&hostdata->srp_task, (void *)ibmvscsi_task, (unsigned long)hostdata); - return 0; + return retrc; req_irq_failed: do { diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 988e6f7af01..94d1de55607 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -34,7 +34,6 @@ #define IDESCSI_VERSION "0.92" #include <linux/module.h> -#include <linux/config.h> #include <linux/types.h> #include <linux/string.h> #include <linux/kernel.h> @@ -518,7 +517,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) /* No more interrupts */ if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) printk (KERN_INFO "Packet command completed, %d bytes transferred\n", pc->actually_transferred); - local_irq_enable(); + local_irq_enable_in_hardirq(); if (status.b.check) rq->errors++; idescsi_end_request (drive, 1, 0); diff --git a/drivers/scsi/imm.c b/drivers/scsi/imm.c index cd2dffdab77..2d95ac9c32c 100644 --- a/drivers/scsi/imm.c +++ b/drivers/scsi/imm.c @@ -3,15 +3,11 @@ * * (The IMM is the embedded controller in the ZIP Plus drive.) * - * Current Maintainer: David Campbell (Perth, Western Australia) - * campbell@torque.net - * * My unoffical company acronym list is 21 pages long: * FLA: Four letter acronym with built in facility for * future expansion to five letters. */ -#include <linux/config.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> diff --git a/drivers/scsi/imm.h b/drivers/scsi/imm.h index dc3aebf0e36..ece936ac29c 100644 --- a/drivers/scsi/imm.h +++ b/drivers/scsi/imm.h @@ -2,7 +2,7 @@ /* Driver for the Iomega MatchMaker parallel port SCSI HBA embedded in * the Iomega ZIP Plus drive * - * (c) 1998 David Campbell campbell@torque.net + * (c) 1998 David Campbell * * Please note that I live in Perth, Western Australia. GMT+0800 */ diff --git a/drivers/scsi/in2000.c b/drivers/scsi/in2000.c index 883bc92b4d9..59a4097f125 100644 --- a/drivers/scsi/in2000.c +++ b/drivers/scsi/in2000.c @@ -2015,7 +2015,7 @@ static int __init in2000_detect(struct scsi_host_template * tpnt) write1_io(0, IO_FIFO_READ); /* start fifo out in read mode */ write1_io(0, IO_INTR_MASK); /* allow all ints */ x = int_tab[(switches & (SW_INT0 | SW_INT1)) >> SW_INT_SHIFT]; - if (request_irq(x, in2000_intr, SA_INTERRUPT, "in2000", instance)) { + if (request_irq(x, in2000_intr, IRQF_DISABLED, "in2000", instance)) { printk("in2000_detect: Unable to allocate IRQ.\n"); detect_count--; continue; diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c index 913ba95f85b..9e10dac61cf 100644 --- a/drivers/scsi/initio.c +++ b/drivers/scsi/initio.c @@ -118,7 +118,6 @@ #include <linux/blkdev.h> #include <linux/spinlock.h> #include <linux/stat.h> -#include <linux/config.h> #include <linux/kernel.h> #include <linux/proc_fs.h> #include <linux/string.h> @@ -2868,7 +2867,7 @@ static int i91u_detect(struct scsi_host_template * tpnt) hreg->sg_tablesize = TOTAL_SG_ENTRY; /* Maximun support is 32 */ /* Initial tulip chip */ - ok = request_irq(pHCB->HCS_Intr, i91u_intr, SA_INTERRUPT | SA_SHIRQ, "i91u", hreg); + ok = request_irq(pHCB->HCS_Intr, i91u_intr, IRQF_DISABLED | IRQF_SHARED, "i91u", hreg); if (ok < 0) { printk(KERN_WARNING "i91u: unable to request IRQ %d\n\n", pHCB->HCS_Intr); return 0; diff --git a/drivers/scsi/initio.h b/drivers/scsi/initio.h index 3efb1184fc3..acb67a4af2c 100644 --- a/drivers/scsi/initio.h +++ b/drivers/scsi/initio.h @@ -54,7 +54,6 @@ **************************************************************************/ -#include <linux/config.h> #include <linux/types.h> #define ULONG unsigned long @@ -193,13 +192,13 @@ typedef struct { #define TSC_SEL_ATN_DIRECT_OUT 0x15 /* Select With ATN Sequence */ #define TSC_SEL_ATN3_DIRECT_IN 0xB5 /* Select With ATN3 Sequence */ #define TSC_SEL_ATN3_DIRECT_OUT 0x35 /* Select With ATN3 Sequence */ -#define TSC_XF_DMA_OUT_DIRECT 0x06 /* DMA Xfer Infomation out */ -#define TSC_XF_DMA_IN_DIRECT 0x86 /* DMA Xfer Infomation in */ +#define TSC_XF_DMA_OUT_DIRECT 0x06 /* DMA Xfer Information out */ +#define TSC_XF_DMA_IN_DIRECT 0x86 /* DMA Xfer Information in */ -#define TSC_XF_DMA_OUT 0x43 /* DMA Xfer Infomation out */ -#define TSC_XF_DMA_IN 0xC3 /* DMA Xfer Infomation in */ -#define TSC_XF_FIFO_OUT 0x03 /* FIFO Xfer Infomation out */ -#define TSC_XF_FIFO_IN 0x83 /* FIFO Xfer Infomation in */ +#define TSC_XF_DMA_OUT 0x43 /* DMA Xfer Information out */ +#define TSC_XF_DMA_IN 0xC3 /* DMA Xfer Information in */ +#define TSC_XF_FIFO_OUT 0x03 /* FIFO Xfer Information out */ +#define TSC_XF_FIFO_IN 0x83 /* FIFO Xfer Information in */ #define TSC_MSG_ACCEPT 0x0F /* Message Accept */ diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 96b65b307dd..7ed4eef8347 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -54,7 +54,6 @@ * */ -#include <linux/config.h> #include <linux/fs.h> #include <linux/init.h> #include <linux/types.h> @@ -176,6 +175,8 @@ struct ipr_error_table_t ipr_error_table[] = { "Qualified success"}, {0x01080000, 1, 1, "FFFE: Soft device bus error recovered by the IOA"}, + {0x01088100, 0, 1, + "4101: Soft device bus fabric error"}, {0x01170600, 0, 1, "FFF9: Device sector reassign successful"}, {0x01170900, 0, 1, @@ -226,6 +227,8 @@ struct ipr_error_table_t ipr_error_table[] = { "3109: IOA timed out a device command"}, {0x04088000, 0, 0, "3120: SCSI bus is not operational"}, + {0x04088100, 0, 1, + "4100: Hard device bus fabric error"}, {0x04118000, 0, 1, "9000: IOA reserved area data check"}, {0x04118100, 0, 1, @@ -274,6 +277,14 @@ struct ipr_error_table_t ipr_error_table[] = { "9091: Incorrect hardware configuration change has been detected"}, {0x04678000, 0, 1, "9073: Invalid multi-adapter configuration"}, + {0x04678100, 0, 1, + "4010: Incorrect connection between cascaded expanders"}, + {0x04678200, 0, 1, + "4020: Connections exceed IOA design limits"}, + {0x04678300, 0, 1, + "4030: Incorrect multipath connection"}, + {0x04679000, 0, 1, + "4110: Unsupported enclosure function"}, {0x046E0000, 0, 1, "FFF4: Command to logical unit failed"}, {0x05240000, 1, 0, @@ -298,6 +309,8 @@ struct ipr_error_table_t ipr_error_table[] = { "9031: Array protection temporarily suspended, protection resuming"}, {0x06040600, 0, 1, "9040: Array protection temporarily suspended, protection resuming"}, + {0x06288000, 0, 1, + "3140: Device bus not ready to ready transition"}, {0x06290000, 0, 1, "FFFB: SCSI bus was reset"}, {0x06290500, 0, 0, @@ -320,6 +333,16 @@ struct ipr_error_table_t ipr_error_table[] = { "3150: SCSI bus configuration error"}, {0x06678100, 0, 1, "9074: Asymmetric advanced function disk configuration"}, + {0x06678300, 0, 1, + "4040: Incomplete multipath connection between IOA and enclosure"}, + {0x06678400, 0, 1, + "4041: Incomplete multipath connection between enclosure and device"}, + {0x06678500, 0, 1, + "9075: Incomplete multipath connection between IOA and remote IOA"}, + {0x06678600, 0, 1, + "9076: Configuration error, missing remote IOA"}, + {0x06679100, 0, 1, + "4050: Enclosure does not support a required multipath function"}, {0x06690200, 0, 1, "9041: Array protection temporarily suspended"}, {0x06698200, 0, 1, @@ -332,6 +355,10 @@ struct ipr_error_table_t ipr_error_table[] = { "9072: Link not operational transition"}, {0x066B8200, 0, 1, "9032: Array exposed but still protected"}, + {0x066B9100, 0, 1, + "4061: Multipath redundancy level got better"}, + {0x066B9200, 0, 1, + "4060: Multipath redundancy level got worse"}, {0x07270000, 0, 0, "Failure due to other device"}, {0x07278000, 0, 1, @@ -4100,8 +4127,7 @@ static int ipr_get_autosense(struct ipr_cmnd *ipr_cmd) { struct ipr_ioasa *ioasa = &ipr_cmd->ioasa; - if ((be32_to_cpu(ioasa->ioasc_specific) & - (IPR_ADDITIONAL_STATUS_FMT | IPR_AUTOSENSE_VALID)) == 0) + if ((be32_to_cpu(ioasa->ioasc_specific) & IPR_AUTOSENSE_VALID) == 0) return 0; memcpy(ipr_cmd->scsi_cmd->sense_buffer, ioasa->auto_sense.data, @@ -4191,7 +4217,8 @@ static void ipr_erp_start(struct ipr_ioa_cfg *ioa_cfg, case IPR_IOASC_NR_INIT_CMD_REQUIRED: break; default: - scsi_cmd->result |= (DID_ERROR << 16); + if (IPR_IOASC_SENSE_KEY(ioasc) > RECOVERED_ERROR) + scsi_cmd->result |= (DID_ERROR << 16); if (!ipr_is_vset_device(res) && !ipr_is_naca_model(res)) res->needs_sync_complete = 1; break; @@ -6429,7 +6456,7 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev, ioa_cfg->needs_hard_reset = 1; ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER); - rc = request_irq(pdev->irq, ipr_isr, SA_SHIRQ, IPR_NAME, ioa_cfg); + rc = request_irq(pdev->irq, ipr_isr, IRQF_SHARED, IPR_NAME, ioa_cfg); if (rc) { dev_err(&pdev->dev, "Couldn't register IRQ %d! rc=%d\n", diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h index 1ad24df69d7..11eaff52432 100644 --- a/drivers/scsi/ipr.h +++ b/drivers/scsi/ipr.h @@ -36,8 +36,8 @@ /* * Literals */ -#define IPR_DRIVER_VERSION "2.1.3" -#define IPR_DRIVER_DATE "(March 29, 2006)" +#define IPR_DRIVER_VERSION "2.1.4" +#define IPR_DRIVER_DATE "(August 2, 2006)" /* * IPR_MAX_CMD_PER_LUN: This defines the maximum number of outstanding @@ -45,6 +45,7 @@ * This can be adjusted at runtime through sysfs device attributes. */ #define IPR_MAX_CMD_PER_LUN 6 +#define IPR_MAX_CMD_PER_ATA_LUN 1 /* * IPR_NUM_BASE_CMD_BLKS: This defines the maximum number of @@ -106,7 +107,7 @@ #define IPR_IOA_BUS 0xff #define IPR_IOA_TARGET 0xff #define IPR_IOA_LUN 0xff -#define IPR_MAX_NUM_BUSES 8 +#define IPR_MAX_NUM_BUSES 16 #define IPR_MAX_BUS_TO_SCAN IPR_MAX_NUM_BUSES #define IPR_NUM_RESET_RELOAD_RETRIES 3 @@ -145,6 +146,7 @@ #define IPR_LUN_RESET 0x40 #define IPR_TARGET_RESET 0x20 #define IPR_BUS_RESET 0x10 +#define IPR_ATA_PHY_RESET 0x80 #define IPR_ID_HOST_RR_Q 0xC4 #define IPR_QUERY_IOA_CONFIG 0xC5 #define IPR_CANCEL_ALL_REQUESTS 0xCE @@ -295,7 +297,11 @@ struct ipr_std_inq_data { }__attribute__ ((packed)); struct ipr_config_table_entry { - u8 service_level; + u8 proto; +#define IPR_PROTO_SATA 0x02 +#define IPR_PROTO_SATA_ATAPI 0x03 +#define IPR_PROTO_SAS_STP 0x06 +#define IPR_PROTO_SAS_STP_ATAPI 0x07 u8 array_id; u8 flags; #define IPR_IS_IOA_RESOURCE 0x80 @@ -307,6 +313,7 @@ struct ipr_config_table_entry { #define IPR_SUBTYPE_AF_DASD 0 #define IPR_SUBTYPE_GENERIC_SCSI 1 #define IPR_SUBTYPE_VOLUME_SET 2 +#define IPR_SUBTYPE_GENERIC_ATA 4 #define IPR_QUEUEING_MODEL(res) ((((res)->cfgte.flags) & 0x70) >> 4) #define IPR_QUEUE_FROZEN_MODEL 0 @@ -350,6 +357,7 @@ struct ipr_cmd_pkt { #define IPR_RQTYPE_SCSICDB 0x00 #define IPR_RQTYPE_IOACMD 0x01 #define IPR_RQTYPE_HCAM 0x02 +#define IPR_RQTYPE_ATA_PASSTHRU 0x04 u8 luntar_luntrn; @@ -373,6 +381,37 @@ struct ipr_cmd_pkt { __be16 timeout; }__attribute__ ((packed, aligned(4))); +struct ipr_ioarcb_ata_regs { + u8 flags; +#define IPR_ATA_FLAG_PACKET_CMD 0x80 +#define IPR_ATA_FLAG_XFER_TYPE_DMA 0x40 +#define IPR_ATA_FLAG_STATUS_ON_GOOD_COMPLETION 0x20 + u8 reserved[3]; + + __be16 data; + u8 feature; + u8 nsect; + u8 lbal; + u8 lbam; + u8 lbah; + u8 device; + u8 command; + u8 reserved2[3]; + u8 hob_feature; + u8 hob_nsect; + u8 hob_lbal; + u8 hob_lbam; + u8 hob_lbah; + u8 ctl; +}__attribute__ ((packed, aligned(4))); + +struct ipr_ioarcb_add_data { + union { + struct ipr_ioarcb_ata_regs regs; + __be32 add_cmd_parms[10]; + }u; +}__attribute__ ((packed, aligned(4))); + /* IOA Request Control Block 128 bytes */ struct ipr_ioarcb { __be32 ioarcb_host_pci_addr; @@ -397,7 +436,7 @@ struct ipr_ioarcb { struct ipr_cmd_pkt cmd_pkt; __be32 add_cmd_parms_len; - __be32 add_cmd_parms[10]; + struct ipr_ioarcb_add_data add_data; }__attribute__((packed, aligned (4))); struct ipr_ioadl_desc { @@ -433,6 +472,21 @@ struct ipr_ioasa_gpdd { __be32 ioa_data[2]; }__attribute__((packed, aligned (4))); +struct ipr_ioasa_gata { + u8 error; + u8 nsect; /* Interrupt reason */ + u8 lbal; + u8 lbam; + u8 lbah; + u8 device; + u8 status; + u8 alt_status; /* ATA CTL */ + u8 hob_nsect; + u8 hob_lbal; + u8 hob_lbam; + u8 hob_lbah; +}__attribute__((packed, aligned (4))); + struct ipr_auto_sense { __be16 auto_sense_len; __be16 ioa_data_len; @@ -466,6 +520,7 @@ struct ipr_ioasa { __be32 ioasc_specific; /* status code specific field */ #define IPR_ADDITIONAL_STATUS_FMT 0x80000000 #define IPR_AUTOSENSE_VALID 0x40000000 +#define IPR_ATA_DEVICE_WAS_RESET 0x20000000 #define IPR_IOASC_SPECIFIC_MASK 0x00ffffff #define IPR_FIELD_POINTER_VALID (0x80000000 >> 8) #define IPR_FIELD_POINTER_MASK 0x0000ffff @@ -474,6 +529,7 @@ struct ipr_ioasa { struct ipr_ioasa_vset vset; struct ipr_ioasa_af_dasd dasd; struct ipr_ioasa_gpdd gpdd; + struct ipr_ioasa_gata gata; } u; struct ipr_auto_sense auto_sense; @@ -1308,6 +1364,22 @@ static inline int ipr_is_scsi_disk(struct ipr_resource_entry *res) } /** + * ipr_is_gata - Determine if a resource is a generic ATA resource + * @res: resource entry struct + * + * Return value: + * 1 if GATA / 0 if not GATA + **/ +static inline int ipr_is_gata(struct ipr_resource_entry *res) +{ + if (!ipr_is_ioa_resource(res) && + IPR_RES_SUBTYPE(res) == IPR_SUBTYPE_GENERIC_ATA) + return 1; + else + return 0; +} + +/** * ipr_is_naca_model - Determine if a resource is using NACA queueing model * @res: resource entry struct * diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index 5353b28b293..3c639286ec1 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -196,7 +196,6 @@ #include <linux/module.h> #include <linux/stat.h> -#include <linux/config.h> #include <linux/spinlock.h> #include <linux/init.h> @@ -6438,7 +6437,7 @@ ips_erase_bios(ips_ha_t * ha) /* VPP failure */ return (1); - /* check for succesful flash */ + /* check for successful flash */ if (status & 0x30) /* sequence error */ return (1); @@ -6550,7 +6549,7 @@ ips_erase_bios_memio(ips_ha_t * ha) /* VPP failure */ return (1); - /* check for succesful flash */ + /* check for successful flash */ if (status & 0x30) /* sequence error */ return (1); @@ -7008,7 +7007,7 @@ ips_register_scsi(int index) memcpy(ha, oldha, sizeof (ips_ha_t)); free_irq(oldha->irq, oldha); /* Install the interrupt handler with the new ha */ - if (request_irq(ha->irq, do_ipsintr, SA_SHIRQ, ips_name, ha)) { + if (request_irq(ha->irq, do_ipsintr, IRQF_SHARED, ips_name, ha)) { IPS_PRINTK(KERN_WARNING, ha->pcidev, "Unable to install interrupt handler\n"); scsi_host_put(sh); @@ -7420,7 +7419,7 @@ ips_init_phase2(int index) } /* Install the interrupt handler */ - if (request_irq(ha->irq, do_ipsintr, SA_SHIRQ, ips_name, ha)) { + if (request_irq(ha->irq, do_ipsintr, IRQF_SHARED, ips_name, ha)) { IPS_PRINTK(KERN_WARNING, ha->pcidev, "Unable to install interrupt handler\n"); return ips_abort_init(ha, index); diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index b4743a9ecc8..0a9dbc59663 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -43,13 +43,10 @@ #include "iscsi_tcp.h" -#define ISCSI_TCP_VERSION "1.0-595" - MODULE_AUTHOR("Dmitry Yusupov <dmitry_yus@yahoo.com>, " "Alex Aizman <itn780@yahoo.com>"); MODULE_DESCRIPTION("iSCSI/TCP data-path"); MODULE_LICENSE("GPL"); -MODULE_VERSION(ISCSI_TCP_VERSION); /* #define DEBUG_TCP */ #define DEBUG_ASSERT @@ -111,8 +108,8 @@ iscsi_hdr_digest(struct iscsi_conn *conn, struct iscsi_buf *buf, { struct iscsi_tcp_conn *tcp_conn = conn->dd_data; - crypto_digest_digest(tcp_conn->tx_tfm, &buf->sg, 1, crc); - buf->sg.length += sizeof(uint32_t); + crypto_hash_digest(&tcp_conn->tx_hash, &buf->sg, buf->sg.length, crc); + buf->sg.length = tcp_conn->hdr_size; } static inline int @@ -185,11 +182,19 @@ iscsi_hdr_extract(struct iscsi_tcp_conn *tcp_conn) * must be called with session lock */ static void -__iscsi_ctask_cleanup(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) +iscsi_tcp_cleanup_ctask(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) { struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; + struct iscsi_r2t_info *r2t; struct scsi_cmnd *sc; + /* flush ctask's r2t queues */ + while (__kfifo_get(tcp_ctask->r2tqueue, (void*)&r2t, sizeof(void*))) { + __kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t, + sizeof(void*)); + debug_scsi("iscsi_tcp_cleanup_ctask pending r2t dropped\n"); + } + sc = ctask->sc; if (unlikely(!sc)) return; @@ -276,7 +281,6 @@ iscsi_solicit_data_init(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, { struct iscsi_data *hdr; struct scsi_cmnd *sc = ctask->sc; - struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; hdr = &r2t->dtask.hdr; memset(hdr, 0, sizeof(struct iscsi_data)); @@ -331,10 +335,12 @@ iscsi_solicit_data_init(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, sg_count += sg->length; } BUG_ON(r2t->sg == NULL); - } else - iscsi_buf_init_iov(&tcp_ctask->sendbuf, + } else { + iscsi_buf_init_iov(&r2t->sendbuf, (char*)sc->request_buffer + r2t->data_offset, r2t->data_count); + r2t->sg = NULL; + } } /** @@ -353,8 +359,11 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) int r2tsn = be32_to_cpu(rhdr->r2tsn); int rc; - if (tcp_conn->in.datalen) + if (tcp_conn->in.datalen) { + printk(KERN_ERR "iscsi_tcp: invalid R2t with datalen %d\n", + tcp_conn->in.datalen); return ISCSI_ERR_DATALEN; + } if (tcp_ctask->exp_r2tsn && tcp_ctask->exp_r2tsn != r2tsn) return ISCSI_ERR_R2TSN; @@ -374,20 +383,29 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) spin_unlock(&session->lock); return 0; } + rc = __kfifo_get(tcp_ctask->r2tpool.queue, (void*)&r2t, sizeof(void*)); BUG_ON(!rc); r2t->exp_statsn = rhdr->statsn; r2t->data_length = be32_to_cpu(rhdr->data_length); - if (r2t->data_length == 0 || - r2t->data_length > session->max_burst) { + if (r2t->data_length == 0) { + printk(KERN_ERR "iscsi_tcp: invalid R2T with zero data len\n"); spin_unlock(&session->lock); return ISCSI_ERR_DATALEN; } + if (r2t->data_length > session->max_burst) + debug_scsi("invalid R2T with data len %u and max burst %u." + "Attempting to execute request.\n", + r2t->data_length, session->max_burst); + r2t->data_offset = be32_to_cpu(rhdr->data_offset); if (r2t->data_offset + r2t->data_length > ctask->total_length) { spin_unlock(&session->lock); + printk(KERN_ERR "iscsi_tcp: invalid R2T with data len %u at " + "offset %u and total length %d\n", r2t->data_length, + r2t->data_offset, ctask->total_length); return ISCSI_ERR_DATALEN; } @@ -399,7 +417,7 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) tcp_ctask->exp_r2tsn = r2tsn + 1; tcp_ctask->xmstate |= XMSTATE_SOL_HDR; __kfifo_put(tcp_ctask->r2tqueue, (void*)&r2t, sizeof(void*)); - __kfifo_put(conn->xmitqueue, (void*)&ctask, sizeof(void*)); + list_move_tail(&ctask->running, &conn->xmitqueue); scsi_queue_work(session->host, &conn->xmitwork); conn->r2t_pdus_cnt++; @@ -450,7 +468,8 @@ iscsi_tcp_hdr_recv(struct iscsi_conn *conn) sg_init_one(&sg, (u8 *)hdr, sizeof(struct iscsi_hdr) + ahslen); - crypto_digest_digest(tcp_conn->rx_tfm, &sg, 1, (u8 *)&cdgst); + crypto_hash_digest(&tcp_conn->rx_hash, &sg, sg.length, + (u8 *)&cdgst); rdgst = *(uint32_t*)((char*)hdr + sizeof(struct iscsi_hdr) + ahslen); if (cdgst != rdgst) { @@ -477,6 +496,8 @@ iscsi_tcp_hdr_recv(struct iscsi_conn *conn) case ISCSI_OP_SCSI_DATA_IN: tcp_conn->in.ctask = session->cmds[itt]; rc = iscsi_data_rsp(conn, tcp_conn->in.ctask); + if (rc) + return rc; /* fall through */ case ISCSI_OP_SCSI_CMD_RSP: tcp_conn->in.ctask = session->cmds[itt]; @@ -484,7 +505,6 @@ iscsi_tcp_hdr_recv(struct iscsi_conn *conn) goto copy_hdr; spin_lock(&session->lock); - __iscsi_ctask_cleanup(conn, tcp_conn->in.ctask); rc = __iscsi_complete_pdu(conn, hdr, NULL, 0); spin_unlock(&session->lock); break; @@ -500,13 +520,28 @@ iscsi_tcp_hdr_recv(struct iscsi_conn *conn) break; case ISCSI_OP_LOGIN_RSP: case ISCSI_OP_TEXT_RSP: - case ISCSI_OP_LOGOUT_RSP: - case ISCSI_OP_NOOP_IN: case ISCSI_OP_REJECT: case ISCSI_OP_ASYNC_EVENT: + /* + * It is possible that we could get a PDU with a buffer larger + * than 8K, but there are no targets that currently do this. + * For now we fail until we find a vendor that needs it + */ + if (DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH < + tcp_conn->in.datalen) { + printk(KERN_ERR "iscsi_tcp: received buffer of len %u " + "but conn buffer is only %u (opcode %0x)\n", + tcp_conn->in.datalen, + DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH, opcode); + rc = ISCSI_ERR_PROTO; + break; + } + if (tcp_conn->in.datalen) goto copy_hdr; /* fall through */ + case ISCSI_OP_LOGOUT_RSP: + case ISCSI_OP_NOOP_IN: case ISCSI_OP_SCSI_TMFUNC_RSP: rc = iscsi_complete_pdu(conn, hdr, NULL, 0); break; @@ -523,7 +558,7 @@ copy_hdr: * skbs to complete the command then we have to copy the header * for later use */ - if (tcp_conn->in.zero_copy_hdr && tcp_conn->in.copy < + if (tcp_conn->in.zero_copy_hdr && tcp_conn->in.copy <= (tcp_conn->in.datalen + tcp_conn->in.padding + (conn->datadgst_en ? 4 : 0))) { debug_tcp("Copying header for later use. in.copy %d in.datalen" @@ -614,10 +649,9 @@ iscsi_ctask_copy(struct iscsi_tcp_conn *tcp_conn, struct iscsi_cmd_task *ctask, * byte counters. **/ static inline int -iscsi_tcp_copy(struct iscsi_tcp_conn *tcp_conn) +iscsi_tcp_copy(struct iscsi_conn *conn, int buf_size) { - void *buf = tcp_conn->data; - int buf_size = tcp_conn->in.datalen; + struct iscsi_tcp_conn *tcp_conn = conn->dd_data; int buf_left = buf_size - tcp_conn->data_copied; int size = min(tcp_conn->in.copy, buf_left); int rc; @@ -627,7 +661,7 @@ iscsi_tcp_copy(struct iscsi_tcp_conn *tcp_conn) BUG_ON(size <= 0); rc = skb_copy_bits(tcp_conn->in.skb, tcp_conn->in.offset, - (char*)buf + tcp_conn->data_copied, size); + (char*)conn->data + tcp_conn->data_copied, size); BUG_ON(rc); tcp_conn->in.offset += size; @@ -642,15 +676,15 @@ iscsi_tcp_copy(struct iscsi_tcp_conn *tcp_conn) } static inline void -partial_sg_digest_update(struct iscsi_tcp_conn *tcp_conn, - struct scatterlist *sg, int offset, int length) +partial_sg_digest_update(struct hash_desc *desc, struct scatterlist *sg, + int offset, int length) { struct scatterlist temp; memcpy(&temp, sg, sizeof(struct scatterlist)); temp.offset = offset; temp.length = length; - crypto_digest_update(tcp_conn->data_rx_tfm, &temp, 1); + crypto_hash_update(desc, &temp, length); } static void @@ -659,7 +693,7 @@ iscsi_recv_digest_update(struct iscsi_tcp_conn *tcp_conn, char* buf, int len) struct scatterlist tmp; sg_init_one(&tmp, buf, len); - crypto_digest_update(tcp_conn->data_rx_tfm, &tmp, 1); + crypto_hash_update(&tcp_conn->rx_hash, &tmp, len); } static int iscsi_scsi_data_in(struct iscsi_conn *conn) @@ -713,11 +747,12 @@ static int iscsi_scsi_data_in(struct iscsi_conn *conn) if (!rc) { if (conn->datadgst_en) { if (!offset) - crypto_digest_update( - tcp_conn->data_rx_tfm, + crypto_hash_update( + &tcp_conn->rx_hash, &sg[i], 1); else - partial_sg_digest_update(tcp_conn, + partial_sg_digest_update( + &tcp_conn->rx_hash, &sg[i], sg[i].offset + offset, sg[i].length - offset); @@ -731,8 +766,10 @@ static int iscsi_scsi_data_in(struct iscsi_conn *conn) /* * data-in is complete, but buffer not... */ - partial_sg_digest_update(tcp_conn, &sg[i], - sg[i].offset, sg[i].length-rc); + partial_sg_digest_update(&tcp_conn->rx_hash, + &sg[i], + sg[i].offset, + sg[i].length-rc); rc = 0; break; } @@ -745,10 +782,10 @@ static int iscsi_scsi_data_in(struct iscsi_conn *conn) done: /* check for non-exceptional status */ if (tcp_conn->in.hdr->flags & ISCSI_FLAG_DATA_STATUS) { - debug_scsi("done [sc %lx res %d itt 0x%x]\n", - (long)sc, sc->result, ctask->itt); + debug_scsi("done [sc %lx res %d itt 0x%x flags 0x%x]\n", + (long)sc, sc->result, ctask->itt, + tcp_conn->in.hdr->flags); spin_lock(&conn->session->lock); - __iscsi_ctask_cleanup(conn, ctask); __iscsi_complete_pdu(conn, tcp_conn->in.hdr, NULL, 0); spin_unlock(&conn->session->lock); } @@ -768,27 +805,23 @@ iscsi_data_recv(struct iscsi_conn *conn) rc = iscsi_scsi_data_in(conn); break; case ISCSI_OP_SCSI_CMD_RSP: - spin_lock(&conn->session->lock); - __iscsi_ctask_cleanup(conn, tcp_conn->in.ctask); - spin_unlock(&conn->session->lock); case ISCSI_OP_TEXT_RSP: case ISCSI_OP_LOGIN_RSP: - case ISCSI_OP_NOOP_IN: case ISCSI_OP_ASYNC_EVENT: case ISCSI_OP_REJECT: /* * Collect data segment to the connection's data * placeholder */ - if (iscsi_tcp_copy(tcp_conn)) { + if (iscsi_tcp_copy(conn, tcp_conn->in.datalen)) { rc = -EAGAIN; goto exit; } - rc = iscsi_complete_pdu(conn, tcp_conn->in.hdr, tcp_conn->data, + rc = iscsi_complete_pdu(conn, tcp_conn->in.hdr, conn->data, tcp_conn->in.datalen); if (!rc && conn->datadgst_en && opcode != ISCSI_OP_LOGIN_RSP) - iscsi_recv_digest_update(tcp_conn, tcp_conn->data, + iscsi_recv_digest_update(tcp_conn, conn->data, tcp_conn->in.datalen); break; default: @@ -843,7 +876,7 @@ more: if (rc == -EAGAIN) goto nomore; else { - iscsi_conn_failure(conn, rc); + iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); return 0; } } @@ -853,10 +886,8 @@ more: */ rc = iscsi_tcp_hdr_recv(conn); if (!rc && tcp_conn->in.datalen) { - if (conn->datadgst_en) { - BUG_ON(!tcp_conn->data_rx_tfm); - crypto_digest_init(tcp_conn->data_rx_tfm); - } + if (conn->datadgst_en) + crypto_hash_init(&tcp_conn->rx_hash); tcp_conn->in_progress = IN_PROGRESS_DATA_RECV; } else if (rc) { iscsi_conn_failure(conn, rc); @@ -869,10 +900,15 @@ more: debug_tcp("extra data_recv offset %d copy %d\n", tcp_conn->in.offset, tcp_conn->in.copy); - skb_copy_bits(tcp_conn->in.skb, tcp_conn->in.offset, - &recv_digest, 4); - tcp_conn->in.offset += 4; - tcp_conn->in.copy -= 4; + rc = iscsi_tcp_copy(conn, sizeof(uint32_t)); + if (rc) { + if (rc == -EAGAIN) + goto again; + iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); + return 0; + } + + memcpy(&recv_digest, conn->data, sizeof(uint32_t)); if (recv_digest != tcp_conn->in.datadgst) { debug_tcp("iscsi_tcp: data digest error!" "0x%x != 0x%x\n", recv_digest, @@ -897,7 +933,7 @@ more: if (rc) { if (rc == -EAGAIN) goto again; - iscsi_conn_failure(conn, rc); + iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); return 0; } tcp_conn->in.copy -= tcp_conn->in.padding; @@ -908,13 +944,14 @@ more: tcp_conn->in.padding); memset(pad, 0, tcp_conn->in.padding); sg_init_one(&sg, pad, tcp_conn->in.padding); - crypto_digest_update(tcp_conn->data_rx_tfm, - &sg, 1); + crypto_hash_update(&tcp_conn->rx_hash, + &sg, sg.length); } - crypto_digest_final(tcp_conn->data_rx_tfm, - (u8 *) & tcp_conn->in.datadgst); + crypto_hash_final(&tcp_conn->rx_hash, + (u8 *) &tcp_conn->in.datadgst); debug_tcp("rx digest 0x%x\n", tcp_conn->in.datadgst); tcp_conn->in_progress = IN_PROGRESS_DDIGEST_RECV; + tcp_conn->data_copied = 0; } else tcp_conn->in_progress = IN_PROGRESS_WAIT_HEADER; } @@ -1028,9 +1065,8 @@ iscsi_conn_set_callbacks(struct iscsi_conn *conn) } static void -iscsi_conn_restore_callbacks(struct iscsi_conn *conn) +iscsi_conn_restore_callbacks(struct iscsi_tcp_conn *tcp_conn) { - struct iscsi_tcp_conn *tcp_conn = conn->dd_data; struct sock *sk = tcp_conn->sock->sk; /* restore socket callbacks, see also: iscsi_conn_set_callbacks() */ @@ -1155,37 +1191,12 @@ iscsi_sendpage(struct iscsi_conn *conn, struct iscsi_buf *buf, static inline void iscsi_data_digest_init(struct iscsi_tcp_conn *tcp_conn, - struct iscsi_cmd_task *ctask) + struct iscsi_tcp_cmd_task *tcp_ctask) { - struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; - - BUG_ON(!tcp_conn->data_tx_tfm); - crypto_digest_init(tcp_conn->data_tx_tfm); + crypto_hash_init(&tcp_conn->tx_hash); tcp_ctask->digest_count = 4; } -static int -iscsi_digest_final_send(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, - struct iscsi_buf *buf, uint32_t *digest, int final) -{ - struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; - struct iscsi_tcp_conn *tcp_conn = conn->dd_data; - int rc = 0; - int sent = 0; - - if (final) - crypto_digest_final(tcp_conn->data_tx_tfm, (u8*)digest); - - iscsi_buf_init_iov(buf, (char*)digest, 4); - rc = iscsi_sendpage(conn, buf, &tcp_ctask->digest_count, &sent); - if (rc) { - tcp_ctask->datadigest = *digest; - tcp_ctask->xmstate |= XMSTATE_DATA_DIGEST; - } else - tcp_ctask->digest_count = 4; - return rc; -} - /** * iscsi_solicit_data_cont - initialize next Data-Out * @conn: iscsi connection @@ -1203,7 +1214,6 @@ static void iscsi_solicit_data_cont(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, struct iscsi_r2t_info *r2t, int left) { - struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; struct iscsi_data *hdr; struct scsi_cmnd *sc = ctask->sc; int new_offset; @@ -1232,27 +1242,30 @@ iscsi_solicit_data_cont(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, iscsi_buf_init_iov(&r2t->headbuf, (char*)hdr, sizeof(struct iscsi_hdr)); - if (sc->use_sg && !iscsi_buf_left(&r2t->sendbuf)) { - BUG_ON(tcp_ctask->bad_sg == r2t->sg); + if (iscsi_buf_left(&r2t->sendbuf)) + return; + + if (sc->use_sg) { iscsi_buf_init_sg(&r2t->sendbuf, r2t->sg); r2t->sg += 1; - } else - iscsi_buf_init_iov(&tcp_ctask->sendbuf, + } else { + iscsi_buf_init_iov(&r2t->sendbuf, (char*)sc->request_buffer + new_offset, r2t->data_count); + r2t->sg = NULL; + } } -static void -iscsi_unsolicit_data_init(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) +static void iscsi_set_padding(struct iscsi_tcp_cmd_task *tcp_ctask, + unsigned long len) { - struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; - struct iscsi_data_task *dtask; + tcp_ctask->pad_count = len & (ISCSI_PAD_LEN - 1); + if (!tcp_ctask->pad_count) + return; - dtask = tcp_ctask->dtask = &tcp_ctask->unsol_dtask; - iscsi_prep_unsolicit_data_pdu(ctask, &dtask->hdr, - tcp_ctask->r2t_data_count); - iscsi_buf_init_iov(&tcp_ctask->headbuf, (char*)&dtask->hdr, - sizeof(struct iscsi_hdr)); + tcp_ctask->pad_count = ISCSI_PAD_LEN - tcp_ctask->pad_count; + debug_scsi("write padding %d bytes\n", tcp_ctask->pad_count); + tcp_ctask->xmstate |= XMSTATE_W_PAD; } /** @@ -1280,38 +1293,20 @@ iscsi_tcp_cmd_init(struct iscsi_cmd_task *ctask) if (sc->use_sg) { struct scatterlist *sg = sc->request_buffer; - iscsi_buf_init_sg(&tcp_ctask->sendbuf, - &sg[tcp_ctask->sg_count++]); - tcp_ctask->sg = sg; + iscsi_buf_init_sg(&tcp_ctask->sendbuf, sg); + tcp_ctask->sg = sg + 1; tcp_ctask->bad_sg = sg + sc->use_sg; - } else + } else { iscsi_buf_init_iov(&tcp_ctask->sendbuf, sc->request_buffer, sc->request_bufflen); - - if (ctask->imm_count) - tcp_ctask->xmstate |= XMSTATE_IMM_DATA; - - tcp_ctask->pad_count = ctask->total_length & (ISCSI_PAD_LEN-1); - if (tcp_ctask->pad_count) { - tcp_ctask->pad_count = ISCSI_PAD_LEN - - tcp_ctask->pad_count; - debug_scsi("write padding %d bytes\n", - tcp_ctask->pad_count); - tcp_ctask->xmstate |= XMSTATE_W_PAD; + tcp_ctask->sg = NULL; + tcp_ctask->bad_sg = NULL; } - - if (ctask->unsol_count) - tcp_ctask->xmstate |= XMSTATE_UNS_HDR | - XMSTATE_UNS_INIT; - tcp_ctask->r2t_data_count = ctask->total_length - - ctask->imm_count - - ctask->unsol_count; - - debug_scsi("cmd [itt %x total %d imm %d imm_data %d " - "r2t_data %d]\n", + debug_scsi("cmd [itt 0x%x total %d imm_data %d " + "unsol count %d, unsol offset %d]\n", ctask->itt, ctask->total_length, ctask->imm_count, - ctask->unsol_count, tcp_ctask->r2t_data_count); + ctask->unsol_count, ctask->unsol_offset); } else tcp_ctask->xmstate = XMSTATE_R_HDR; @@ -1393,8 +1388,8 @@ iscsi_tcp_mtask_xmit(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask) } static inline int -handle_xmstate_r_hdr(struct iscsi_conn *conn, - struct iscsi_tcp_cmd_task *tcp_ctask) +iscsi_send_read_hdr(struct iscsi_conn *conn, + struct iscsi_tcp_cmd_task *tcp_ctask) { int rc; @@ -1412,7 +1407,7 @@ handle_xmstate_r_hdr(struct iscsi_conn *conn, } static inline int -handle_xmstate_w_hdr(struct iscsi_conn *conn, +iscsi_send_write_hdr(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) { struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; @@ -1423,85 +1418,126 @@ handle_xmstate_w_hdr(struct iscsi_conn *conn, iscsi_hdr_digest(conn, &tcp_ctask->headbuf, (u8*)tcp_ctask->hdrext); rc = iscsi_sendhdr(conn, &tcp_ctask->headbuf, ctask->imm_count); - if (rc) + if (rc) { tcp_ctask->xmstate |= XMSTATE_W_HDR; - return rc; + return rc; + } + + if (ctask->imm_count) { + tcp_ctask->xmstate |= XMSTATE_IMM_DATA; + iscsi_set_padding(tcp_ctask, ctask->imm_count); + + if (ctask->conn->datadgst_en) { + iscsi_data_digest_init(ctask->conn->dd_data, tcp_ctask); + tcp_ctask->immdigest = 0; + } + } + + if (ctask->unsol_count) + tcp_ctask->xmstate |= XMSTATE_UNS_HDR | XMSTATE_UNS_INIT; + return 0; } -static inline int -handle_xmstate_data_digest(struct iscsi_conn *conn, - struct iscsi_cmd_task *ctask) +static int +iscsi_send_padding(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) { struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; - int rc; + struct iscsi_tcp_conn *tcp_conn = conn->dd_data; + int sent = 0, rc; - tcp_ctask->xmstate &= ~XMSTATE_DATA_DIGEST; - debug_tcp("resent data digest 0x%x\n", tcp_ctask->datadigest); - rc = iscsi_digest_final_send(conn, ctask, &tcp_ctask->immbuf, - &tcp_ctask->datadigest, 0); + if (tcp_ctask->xmstate & XMSTATE_W_PAD) { + iscsi_buf_init_iov(&tcp_ctask->sendbuf, (char*)&tcp_ctask->pad, + tcp_ctask->pad_count); + if (conn->datadgst_en) + crypto_hash_update(&tcp_conn->tx_hash, + &tcp_ctask->sendbuf.sg, + tcp_ctask->sendbuf.sg.length); + } else if (!(tcp_ctask->xmstate & XMSTATE_W_RESEND_PAD)) + return 0; + + tcp_ctask->xmstate &= ~XMSTATE_W_PAD; + tcp_ctask->xmstate &= ~XMSTATE_W_RESEND_PAD; + debug_scsi("sending %d pad bytes for itt 0x%x\n", + tcp_ctask->pad_count, ctask->itt); + rc = iscsi_sendpage(conn, &tcp_ctask->sendbuf, &tcp_ctask->pad_count, + &sent); if (rc) { - tcp_ctask->xmstate |= XMSTATE_DATA_DIGEST; - debug_tcp("resent data digest 0x%x fail!\n", - tcp_ctask->datadigest); + debug_scsi("padding send failed %d\n", rc); + tcp_ctask->xmstate |= XMSTATE_W_RESEND_PAD; } - return rc; } -static inline int -handle_xmstate_imm_data(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) +static int +iscsi_send_digest(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, + struct iscsi_buf *buf, uint32_t *digest) { - struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; - struct iscsi_tcp_conn *tcp_conn = conn->dd_data; - int rc; + struct iscsi_tcp_cmd_task *tcp_ctask; + struct iscsi_tcp_conn *tcp_conn; + int rc, sent = 0; - BUG_ON(!ctask->imm_count); - tcp_ctask->xmstate &= ~XMSTATE_IMM_DATA; + if (!conn->datadgst_en) + return 0; - if (conn->datadgst_en) { - iscsi_data_digest_init(tcp_conn, ctask); - tcp_ctask->immdigest = 0; - } + tcp_ctask = ctask->dd_data; + tcp_conn = conn->dd_data; - for (;;) { - rc = iscsi_sendpage(conn, &tcp_ctask->sendbuf, - &ctask->imm_count, &tcp_ctask->sent); - if (rc) { - tcp_ctask->xmstate |= XMSTATE_IMM_DATA; - if (conn->datadgst_en) { - crypto_digest_final(tcp_conn->data_tx_tfm, - (u8*)&tcp_ctask->immdigest); - debug_tcp("tx imm sendpage fail 0x%x\n", - tcp_ctask->datadigest); - } - return rc; - } - if (conn->datadgst_en) - crypto_digest_update(tcp_conn->data_tx_tfm, - &tcp_ctask->sendbuf.sg, 1); + if (!(tcp_ctask->xmstate & XMSTATE_W_RESEND_DATA_DIGEST)) { + crypto_hash_final(&tcp_conn->tx_hash, (u8*)digest); + iscsi_buf_init_iov(buf, (char*)digest, 4); + } + tcp_ctask->xmstate &= ~XMSTATE_W_RESEND_DATA_DIGEST; - if (!ctask->imm_count) - break; - iscsi_buf_init_sg(&tcp_ctask->sendbuf, - &tcp_ctask->sg[tcp_ctask->sg_count++]); + rc = iscsi_sendpage(conn, buf, &tcp_ctask->digest_count, &sent); + if (!rc) + debug_scsi("sent digest 0x%x for itt 0x%x\n", *digest, + ctask->itt); + else { + debug_scsi("sending digest 0x%x failed for itt 0x%x!\n", + *digest, ctask->itt); + tcp_ctask->xmstate |= XMSTATE_W_RESEND_DATA_DIGEST; } + return rc; +} - if (conn->datadgst_en && !(tcp_ctask->xmstate & XMSTATE_W_PAD)) { - rc = iscsi_digest_final_send(conn, ctask, &tcp_ctask->immbuf, - &tcp_ctask->immdigest, 1); - if (rc) { - debug_tcp("sending imm digest 0x%x fail!\n", - tcp_ctask->immdigest); - return rc; +static int +iscsi_send_data(struct iscsi_cmd_task *ctask, struct iscsi_buf *sendbuf, + struct scatterlist **sg, int *sent, int *count, + struct iscsi_buf *digestbuf, uint32_t *digest) +{ + struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; + struct iscsi_conn *conn = ctask->conn; + struct iscsi_tcp_conn *tcp_conn = conn->dd_data; + int rc, buf_sent, offset; + + while (*count) { + buf_sent = 0; + offset = sendbuf->sent; + + rc = iscsi_sendpage(conn, sendbuf, count, &buf_sent); + *sent = *sent + buf_sent; + if (buf_sent && conn->datadgst_en) + partial_sg_digest_update(&tcp_conn->tx_hash, + &sendbuf->sg, sendbuf->sg.offset + offset, + buf_sent); + if (!iscsi_buf_left(sendbuf) && *sg != tcp_ctask->bad_sg) { + iscsi_buf_init_sg(sendbuf, *sg); + *sg = *sg + 1; } - debug_tcp("sending imm digest 0x%x\n", tcp_ctask->immdigest); + + if (rc) + return rc; } - return 0; + rc = iscsi_send_padding(conn, ctask); + if (rc) + return rc; + + return iscsi_send_digest(conn, ctask, digestbuf, digest); } -static inline int -handle_xmstate_uns_hdr(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) +static int +iscsi_send_unsol_hdr(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) { struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; struct iscsi_data_task *dtask; @@ -1509,12 +1545,17 @@ handle_xmstate_uns_hdr(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) tcp_ctask->xmstate |= XMSTATE_UNS_DATA; if (tcp_ctask->xmstate & XMSTATE_UNS_INIT) { - iscsi_unsolicit_data_init(conn, ctask); - dtask = tcp_ctask->dtask; + dtask = &tcp_ctask->unsol_dtask; + + iscsi_prep_unsolicit_data_pdu(ctask, &dtask->hdr); + iscsi_buf_init_iov(&tcp_ctask->headbuf, (char*)&dtask->hdr, + sizeof(struct iscsi_hdr)); if (conn->hdrdgst_en) iscsi_hdr_digest(conn, &tcp_ctask->headbuf, (u8*)dtask->hdrext); + tcp_ctask->xmstate &= ~XMSTATE_UNS_INIT; + iscsi_set_padding(tcp_ctask, ctask->data_count); } rc = iscsi_sendhdr(conn, &tcp_ctask->headbuf, ctask->data_count); @@ -1524,254 +1565,138 @@ handle_xmstate_uns_hdr(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) return rc; } + if (conn->datadgst_en) { + dtask = &tcp_ctask->unsol_dtask; + iscsi_data_digest_init(ctask->conn->dd_data, tcp_ctask); + dtask->digest = 0; + } + debug_scsi("uns dout [itt 0x%x dlen %d sent %d]\n", ctask->itt, ctask->unsol_count, tcp_ctask->sent); return 0; } -static inline int -handle_xmstate_uns_data(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) +static int +iscsi_send_unsol_pdu(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) { struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; - struct iscsi_data_task *dtask = tcp_ctask->dtask; - struct iscsi_tcp_conn *tcp_conn = conn->dd_data; int rc; - BUG_ON(!ctask->data_count); - tcp_ctask->xmstate &= ~XMSTATE_UNS_DATA; - - if (conn->datadgst_en) { - iscsi_data_digest_init(tcp_conn, ctask); - dtask->digest = 0; + if (tcp_ctask->xmstate & XMSTATE_UNS_HDR) { + BUG_ON(!ctask->unsol_count); + tcp_ctask->xmstate &= ~XMSTATE_UNS_HDR; +send_hdr: + rc = iscsi_send_unsol_hdr(conn, ctask); + if (rc) + return rc; } - for (;;) { + if (tcp_ctask->xmstate & XMSTATE_UNS_DATA) { + struct iscsi_data_task *dtask = &tcp_ctask->unsol_dtask; int start = tcp_ctask->sent; - rc = iscsi_sendpage(conn, &tcp_ctask->sendbuf, - &ctask->data_count, &tcp_ctask->sent); - if (rc) { - ctask->unsol_count -= tcp_ctask->sent - start; - tcp_ctask->xmstate |= XMSTATE_UNS_DATA; - /* will continue with this ctask later.. */ - if (conn->datadgst_en) { - crypto_digest_final(tcp_conn->data_tx_tfm, - (u8 *)&dtask->digest); - debug_tcp("tx uns data fail 0x%x\n", - dtask->digest); - } - return rc; - } - - BUG_ON(tcp_ctask->sent > ctask->total_length); + rc = iscsi_send_data(ctask, &tcp_ctask->sendbuf, &tcp_ctask->sg, + &tcp_ctask->sent, &ctask->data_count, + &dtask->digestbuf, &dtask->digest); ctask->unsol_count -= tcp_ctask->sent - start; - + if (rc) + return rc; + tcp_ctask->xmstate &= ~XMSTATE_UNS_DATA; /* - * XXX:we may run here with un-initial sendbuf. - * so pass it + * Done with the Data-Out. Next, check if we need + * to send another unsolicited Data-Out. */ - if (conn->datadgst_en && tcp_ctask->sent - start > 0) - crypto_digest_update(tcp_conn->data_tx_tfm, - &tcp_ctask->sendbuf.sg, 1); - - if (!ctask->data_count) - break; - iscsi_buf_init_sg(&tcp_ctask->sendbuf, - &tcp_ctask->sg[tcp_ctask->sg_count++]); - } - BUG_ON(ctask->unsol_count < 0); - - /* - * Done with the Data-Out. Next, check if we need - * to send another unsolicited Data-Out. - */ - if (ctask->unsol_count) { - if (conn->datadgst_en) { - rc = iscsi_digest_final_send(conn, ctask, - &dtask->digestbuf, - &dtask->digest, 1); - if (rc) { - debug_tcp("send uns digest 0x%x fail\n", - dtask->digest); - return rc; - } - debug_tcp("sending uns digest 0x%x, more uns\n", - dtask->digest); + if (ctask->unsol_count) { + debug_scsi("sending more uns\n"); + tcp_ctask->xmstate |= XMSTATE_UNS_INIT; + goto send_hdr; } - tcp_ctask->xmstate |= XMSTATE_UNS_INIT; - return 1; } - - if (conn->datadgst_en && !(tcp_ctask->xmstate & XMSTATE_W_PAD)) { - rc = iscsi_digest_final_send(conn, ctask, - &dtask->digestbuf, - &dtask->digest, 1); - if (rc) { - debug_tcp("send last uns digest 0x%x fail\n", - dtask->digest); - return rc; - } - debug_tcp("sending uns digest 0x%x\n",dtask->digest); - } - return 0; } -static inline int -handle_xmstate_sol_data(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) +static int iscsi_send_sol_pdu(struct iscsi_conn *conn, + struct iscsi_cmd_task *ctask) { - struct iscsi_session *session = conn->session; - struct iscsi_tcp_conn *tcp_conn = conn->dd_data; struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; - struct iscsi_r2t_info *r2t = tcp_ctask->r2t; - struct iscsi_data_task *dtask = &r2t->dtask; + struct iscsi_session *session = conn->session; + struct iscsi_r2t_info *r2t; + struct iscsi_data_task *dtask; int left, rc; - tcp_ctask->xmstate &= ~XMSTATE_SOL_DATA; - tcp_ctask->dtask = dtask; - - if (conn->datadgst_en) { - iscsi_data_digest_init(tcp_conn, ctask); - dtask->digest = 0; - } -solicit_again: - /* - * send Data-Out whitnin this R2T sequence. - */ - if (!r2t->data_count) - goto data_out_done; - - rc = iscsi_sendpage(conn, &r2t->sendbuf, &r2t->data_count, &r2t->sent); - if (rc) { + if (tcp_ctask->xmstate & XMSTATE_SOL_HDR) { + tcp_ctask->xmstate &= ~XMSTATE_SOL_HDR; tcp_ctask->xmstate |= XMSTATE_SOL_DATA; - /* will continue with this ctask later.. */ - if (conn->datadgst_en) { - crypto_digest_final(tcp_conn->data_tx_tfm, - (u8 *)&dtask->digest); - debug_tcp("r2t data send fail 0x%x\n", dtask->digest); - } - return rc; - } + if (!tcp_ctask->r2t) + __kfifo_get(tcp_ctask->r2tqueue, (void*)&tcp_ctask->r2t, + sizeof(void*)); +send_hdr: + r2t = tcp_ctask->r2t; + dtask = &r2t->dtask; - BUG_ON(r2t->data_count < 0); - if (conn->datadgst_en) - crypto_digest_update(tcp_conn->data_tx_tfm, &r2t->sendbuf.sg, - 1); - - if (r2t->data_count) { - BUG_ON(ctask->sc->use_sg == 0); - if (!iscsi_buf_left(&r2t->sendbuf)) { - BUG_ON(tcp_ctask->bad_sg == r2t->sg); - iscsi_buf_init_sg(&r2t->sendbuf, r2t->sg); - r2t->sg += 1; + if (conn->hdrdgst_en) + iscsi_hdr_digest(conn, &r2t->headbuf, + (u8*)dtask->hdrext); + rc = iscsi_sendhdr(conn, &r2t->headbuf, r2t->data_count); + if (rc) { + tcp_ctask->xmstate &= ~XMSTATE_SOL_DATA; + tcp_ctask->xmstate |= XMSTATE_SOL_HDR; + return rc; } - goto solicit_again; - } -data_out_done: - /* - * Done with this Data-Out. Next, check if we have - * to send another Data-Out for this R2T. - */ - BUG_ON(r2t->data_length - r2t->sent < 0); - left = r2t->data_length - r2t->sent; - if (left) { if (conn->datadgst_en) { - rc = iscsi_digest_final_send(conn, ctask, - &dtask->digestbuf, - &dtask->digest, 1); - if (rc) { - debug_tcp("send r2t data digest 0x%x" - "fail\n", dtask->digest); - return rc; - } - debug_tcp("r2t data send digest 0x%x\n", - dtask->digest); + iscsi_data_digest_init(conn->dd_data, tcp_ctask); + dtask->digest = 0; } - iscsi_solicit_data_cont(conn, ctask, r2t, left); - tcp_ctask->xmstate |= XMSTATE_SOL_DATA; - tcp_ctask->xmstate &= ~XMSTATE_SOL_HDR; - return 1; - } - - /* - * Done with this R2T. Check if there are more - * outstanding R2Ts ready to be processed. - */ - BUG_ON(tcp_ctask->r2t_data_count - r2t->data_length < 0); - if (conn->datadgst_en) { - rc = iscsi_digest_final_send(conn, ctask, &dtask->digestbuf, - &dtask->digest, 1); - if (rc) { - debug_tcp("send last r2t data digest 0x%x" - "fail\n", dtask->digest); - return rc; - } - debug_tcp("r2t done dout digest 0x%x\n", dtask->digest); - } - tcp_ctask->r2t_data_count -= r2t->data_length; - tcp_ctask->r2t = NULL; - spin_lock_bh(&session->lock); - __kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t, sizeof(void*)); - spin_unlock_bh(&session->lock); - if (__kfifo_get(tcp_ctask->r2tqueue, (void*)&r2t, sizeof(void*))) { - tcp_ctask->r2t = r2t; - tcp_ctask->xmstate |= XMSTATE_SOL_DATA; - tcp_ctask->xmstate &= ~XMSTATE_SOL_HDR; - return 1; + iscsi_set_padding(tcp_ctask, r2t->data_count); + debug_scsi("sol dout [dsn %d itt 0x%x dlen %d sent %d]\n", + r2t->solicit_datasn - 1, ctask->itt, r2t->data_count, + r2t->sent); } - return 0; -} + if (tcp_ctask->xmstate & XMSTATE_SOL_DATA) { + r2t = tcp_ctask->r2t; + dtask = &r2t->dtask; -static inline int -handle_xmstate_w_pad(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) -{ - struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; - struct iscsi_tcp_conn *tcp_conn = conn->dd_data; - struct iscsi_data_task *dtask = tcp_ctask->dtask; - int sent, rc; + rc = iscsi_send_data(ctask, &r2t->sendbuf, &r2t->sg, + &r2t->sent, &r2t->data_count, + &dtask->digestbuf, &dtask->digest); + if (rc) + return rc; + tcp_ctask->xmstate &= ~XMSTATE_SOL_DATA; - tcp_ctask->xmstate &= ~XMSTATE_W_PAD; - iscsi_buf_init_iov(&tcp_ctask->sendbuf, (char*)&tcp_ctask->pad, - tcp_ctask->pad_count); - rc = iscsi_sendpage(conn, &tcp_ctask->sendbuf, &tcp_ctask->pad_count, - &sent); - if (rc) { - tcp_ctask->xmstate |= XMSTATE_W_PAD; - return rc; - } + /* + * Done with this Data-Out. Next, check if we have + * to send another Data-Out for this R2T. + */ + BUG_ON(r2t->data_length - r2t->sent < 0); + left = r2t->data_length - r2t->sent; + if (left) { + iscsi_solicit_data_cont(conn, ctask, r2t, left); + tcp_ctask->xmstate |= XMSTATE_SOL_DATA; + tcp_ctask->xmstate &= ~XMSTATE_SOL_HDR; + goto send_hdr; + } - if (conn->datadgst_en) { - crypto_digest_update(tcp_conn->data_tx_tfm, - &tcp_ctask->sendbuf.sg, 1); - /* imm data? */ - if (!dtask) { - rc = iscsi_digest_final_send(conn, ctask, - &tcp_ctask->immbuf, - &tcp_ctask->immdigest, 1); - if (rc) { - debug_tcp("send padding digest 0x%x" - "fail!\n", tcp_ctask->immdigest); - return rc; - } - debug_tcp("done with padding, digest 0x%x\n", - tcp_ctask->datadigest); - } else { - rc = iscsi_digest_final_send(conn, ctask, - &dtask->digestbuf, - &dtask->digest, 1); - if (rc) { - debug_tcp("send padding digest 0x%x" - "fail\n", dtask->digest); - return rc; - } - debug_tcp("done with padding, digest 0x%x\n", - dtask->digest); + /* + * Done with this R2T. Check if there are more + * outstanding R2Ts ready to be processed. + */ + spin_lock_bh(&session->lock); + tcp_ctask->r2t = NULL; + __kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t, + sizeof(void*)); + if (__kfifo_get(tcp_ctask->r2tqueue, (void*)&r2t, + sizeof(void*))) { + tcp_ctask->r2t = r2t; + tcp_ctask->xmstate |= XMSTATE_SOL_DATA; + tcp_ctask->xmstate &= ~XMSTATE_SOL_HDR; + spin_unlock_bh(&session->lock); + goto send_hdr; } + spin_unlock_bh(&session->lock); } - return 0; } @@ -1791,85 +1716,30 @@ iscsi_tcp_ctask_xmit(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) return rc; if (tcp_ctask->xmstate & XMSTATE_R_HDR) - return handle_xmstate_r_hdr(conn, tcp_ctask); + return iscsi_send_read_hdr(conn, tcp_ctask); if (tcp_ctask->xmstate & XMSTATE_W_HDR) { - rc = handle_xmstate_w_hdr(conn, ctask); - if (rc) - return rc; - } - - /* XXX: for data digest xmit recover */ - if (tcp_ctask->xmstate & XMSTATE_DATA_DIGEST) { - rc = handle_xmstate_data_digest(conn, ctask); + rc = iscsi_send_write_hdr(conn, ctask); if (rc) return rc; } if (tcp_ctask->xmstate & XMSTATE_IMM_DATA) { - rc = handle_xmstate_imm_data(conn, ctask); + rc = iscsi_send_data(ctask, &tcp_ctask->sendbuf, &tcp_ctask->sg, + &tcp_ctask->sent, &ctask->imm_count, + &tcp_ctask->immbuf, &tcp_ctask->immdigest); if (rc) return rc; + tcp_ctask->xmstate &= ~XMSTATE_IMM_DATA; } - if (tcp_ctask->xmstate & XMSTATE_UNS_HDR) { - BUG_ON(!ctask->unsol_count); - tcp_ctask->xmstate &= ~XMSTATE_UNS_HDR; -unsolicit_head_again: - rc = handle_xmstate_uns_hdr(conn, ctask); - if (rc) - return rc; - } - - if (tcp_ctask->xmstate & XMSTATE_UNS_DATA) { - rc = handle_xmstate_uns_data(conn, ctask); - if (rc == 1) - goto unsolicit_head_again; - else if (rc) - return rc; - goto done; - } - - if (tcp_ctask->xmstate & XMSTATE_SOL_HDR) { - struct iscsi_r2t_info *r2t; - - tcp_ctask->xmstate &= ~XMSTATE_SOL_HDR; - tcp_ctask->xmstate |= XMSTATE_SOL_DATA; - if (!tcp_ctask->r2t) - __kfifo_get(tcp_ctask->r2tqueue, (void*)&tcp_ctask->r2t, - sizeof(void*)); -solicit_head_again: - r2t = tcp_ctask->r2t; - if (conn->hdrdgst_en) - iscsi_hdr_digest(conn, &r2t->headbuf, - (u8*)r2t->dtask.hdrext); - rc = iscsi_sendhdr(conn, &r2t->headbuf, r2t->data_count); - if (rc) { - tcp_ctask->xmstate &= ~XMSTATE_SOL_DATA; - tcp_ctask->xmstate |= XMSTATE_SOL_HDR; - return rc; - } - - debug_scsi("sol dout [dsn %d itt 0x%x dlen %d sent %d]\n", - r2t->solicit_datasn - 1, ctask->itt, r2t->data_count, - r2t->sent); - } - - if (tcp_ctask->xmstate & XMSTATE_SOL_DATA) { - rc = handle_xmstate_sol_data(conn, ctask); - if (rc == 1) - goto solicit_head_again; - if (rc) - return rc; - } + rc = iscsi_send_unsol_pdu(conn, ctask); + if (rc) + return rc; -done: - /* - * Last thing to check is whether we need to send write - * padding. Note that we check for xmstate equality, not just the bit. - */ - if (tcp_ctask->xmstate == XMSTATE_W_PAD) - rc = handle_xmstate_w_pad(conn, ctask); + rc = iscsi_send_sol_pdu(conn, ctask); + if (rc) + return rc; return rc; } @@ -1900,20 +1770,24 @@ iscsi_tcp_conn_create(struct iscsi_cls_session *cls_session, uint32_t conn_idx) tcp_conn->in_progress = IN_PROGRESS_WAIT_HEADER; /* initial operational parameters */ tcp_conn->hdr_size = sizeof(struct iscsi_hdr); - tcp_conn->data_size = DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH; - /* allocate initial PDU receive place holder */ - if (tcp_conn->data_size <= PAGE_SIZE) - tcp_conn->data = kmalloc(tcp_conn->data_size, GFP_KERNEL); - else - tcp_conn->data = (void*)__get_free_pages(GFP_KERNEL, - get_order(tcp_conn->data_size)); - if (!tcp_conn->data) - goto max_recv_dlenght_alloc_fail; + tcp_conn->tx_hash.tfm = crypto_alloc_hash("crc32c", 0, + CRYPTO_ALG_ASYNC); + tcp_conn->tx_hash.flags = 0; + if (!tcp_conn->tx_hash.tfm) + goto free_tcp_conn; + + tcp_conn->rx_hash.tfm = crypto_alloc_hash("crc32c", 0, + CRYPTO_ALG_ASYNC); + tcp_conn->rx_hash.flags = 0; + if (!tcp_conn->rx_hash.tfm) + goto free_tx_tfm; return cls_conn; -max_recv_dlenght_alloc_fail: +free_tx_tfm: + crypto_free_hash(tcp_conn->tx_hash.tfm); +free_tcp_conn: kfree(tcp_conn); tcp_conn_alloc_fail: iscsi_conn_teardown(cls_conn); @@ -1921,6 +1795,23 @@ tcp_conn_alloc_fail: } static void +iscsi_tcp_release_conn(struct iscsi_conn *conn) +{ + struct iscsi_tcp_conn *tcp_conn = conn->dd_data; + + if (!tcp_conn->sock) + return; + + sock_hold(tcp_conn->sock->sk); + iscsi_conn_restore_callbacks(tcp_conn); + sock_put(tcp_conn->sock->sk); + + sock_release(tcp_conn->sock); + tcp_conn->sock = NULL; + conn->recv_lock = NULL; +} + +static void iscsi_tcp_conn_destroy(struct iscsi_cls_conn *cls_conn) { struct iscsi_conn *conn = cls_conn->dd_data; @@ -1930,29 +1821,31 @@ iscsi_tcp_conn_destroy(struct iscsi_cls_conn *cls_conn) if (conn->hdrdgst_en || conn->datadgst_en) digest = 1; + iscsi_tcp_release_conn(conn); iscsi_conn_teardown(cls_conn); /* now free tcp_conn */ if (digest) { - if (tcp_conn->tx_tfm) - crypto_free_tfm(tcp_conn->tx_tfm); - if (tcp_conn->rx_tfm) - crypto_free_tfm(tcp_conn->rx_tfm); - if (tcp_conn->data_tx_tfm) - crypto_free_tfm(tcp_conn->data_tx_tfm); - if (tcp_conn->data_rx_tfm) - crypto_free_tfm(tcp_conn->data_rx_tfm); + if (tcp_conn->tx_hash.tfm) + crypto_free_hash(tcp_conn->tx_hash.tfm); + if (tcp_conn->rx_hash.tfm) + crypto_free_hash(tcp_conn->rx_hash.tfm); } - /* free conn->data, size = MaxRecvDataSegmentLength */ - if (tcp_conn->data_size <= PAGE_SIZE) - kfree(tcp_conn->data); - else - free_pages((unsigned long)tcp_conn->data, - get_order(tcp_conn->data_size)); kfree(tcp_conn); } +static void +iscsi_tcp_conn_stop(struct iscsi_cls_conn *cls_conn, int flag) +{ + struct iscsi_conn *conn = cls_conn->dd_data; + struct iscsi_tcp_conn *tcp_conn = conn->dd_data; + + iscsi_conn_stop(cls_conn, flag); + iscsi_tcp_release_conn(conn); + tcp_conn->hdr_size = sizeof(struct iscsi_hdr); +} + static int iscsi_tcp_conn_bind(struct iscsi_cls_session *cls_session, struct iscsi_cls_conn *cls_conn, uint64_t transport_eph, @@ -2001,52 +1894,6 @@ iscsi_tcp_conn_bind(struct iscsi_cls_session *cls_session, return 0; } -static void -iscsi_tcp_cleanup_ctask(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) -{ - struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; - struct iscsi_r2t_info *r2t; - - /* flush ctask's r2t queues */ - while (__kfifo_get(tcp_ctask->r2tqueue, (void*)&r2t, sizeof(void*))) - __kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t, - sizeof(void*)); - - __iscsi_ctask_cleanup(conn, ctask); -} - -static void -iscsi_tcp_suspend_conn_rx(struct iscsi_conn *conn) -{ - struct iscsi_tcp_conn *tcp_conn = conn->dd_data; - struct sock *sk; - - if (!tcp_conn->sock) - return; - - sk = tcp_conn->sock->sk; - write_lock_bh(&sk->sk_callback_lock); - set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx); - write_unlock_bh(&sk->sk_callback_lock); -} - -static void -iscsi_tcp_terminate_conn(struct iscsi_conn *conn) -{ - struct iscsi_tcp_conn *tcp_conn = conn->dd_data; - - if (!tcp_conn->sock) - return; - - sock_hold(tcp_conn->sock->sk); - iscsi_conn_restore_callbacks(conn); - sock_put(tcp_conn->sock->sk); - - sock_release(tcp_conn->sock); - tcp_conn->sock = NULL; - conn->recv_lock = NULL; -} - /* called with host lock */ static void iscsi_tcp_mgmt_init(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask, @@ -2057,6 +1904,7 @@ iscsi_tcp_mgmt_init(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask, iscsi_buf_init_iov(&tcp_mtask->headbuf, (char*)mtask->hdr, sizeof(struct iscsi_hdr)); tcp_mtask->xmstate = XMSTATE_IMM_HDR; + tcp_mtask->sent = 0; if (mtask->data_count) iscsi_buf_init_iov(&tcp_mtask->sendbuf, (char*)mtask->data, @@ -2130,211 +1978,55 @@ iscsi_r2tpool_free(struct iscsi_session *session) static int iscsi_conn_set_param(struct iscsi_cls_conn *cls_conn, enum iscsi_param param, - uint32_t value) + char *buf, int buflen) { struct iscsi_conn *conn = cls_conn->dd_data; struct iscsi_session *session = conn->session; struct iscsi_tcp_conn *tcp_conn = conn->dd_data; + int value; switch(param) { - case ISCSI_PARAM_MAX_RECV_DLENGTH: { - char *saveptr = tcp_conn->data; - gfp_t flags = GFP_KERNEL; - - if (tcp_conn->data_size >= value) { - conn->max_recv_dlength = value; - break; - } - - spin_lock_bh(&session->lock); - if (conn->stop_stage == STOP_CONN_RECOVER) - flags = GFP_ATOMIC; - spin_unlock_bh(&session->lock); - - if (value <= PAGE_SIZE) - tcp_conn->data = kmalloc(value, flags); - else - tcp_conn->data = (void*)__get_free_pages(flags, - get_order(value)); - if (tcp_conn->data == NULL) { - tcp_conn->data = saveptr; - return -ENOMEM; - } - if (tcp_conn->data_size <= PAGE_SIZE) - kfree(saveptr); - else - free_pages((unsigned long)saveptr, - get_order(tcp_conn->data_size)); - conn->max_recv_dlength = value; - tcp_conn->data_size = value; - } - break; - case ISCSI_PARAM_MAX_XMIT_DLENGTH: - conn->max_xmit_dlength = value; - break; case ISCSI_PARAM_HDRDGST_EN: - conn->hdrdgst_en = value; + iscsi_set_param(cls_conn, param, buf, buflen); tcp_conn->hdr_size = sizeof(struct iscsi_hdr); - if (conn->hdrdgst_en) { + if (conn->hdrdgst_en) tcp_conn->hdr_size += sizeof(__u32); - if (!tcp_conn->tx_tfm) - tcp_conn->tx_tfm = crypto_alloc_tfm("crc32c", - 0); - if (!tcp_conn->tx_tfm) - return -ENOMEM; - if (!tcp_conn->rx_tfm) - tcp_conn->rx_tfm = crypto_alloc_tfm("crc32c", - 0); - if (!tcp_conn->rx_tfm) { - crypto_free_tfm(tcp_conn->tx_tfm); - return -ENOMEM; - } - } else { - if (tcp_conn->tx_tfm) - crypto_free_tfm(tcp_conn->tx_tfm); - if (tcp_conn->rx_tfm) - crypto_free_tfm(tcp_conn->rx_tfm); - } break; case ISCSI_PARAM_DATADGST_EN: - conn->datadgst_en = value; - if (conn->datadgst_en) { - if (!tcp_conn->data_tx_tfm) - tcp_conn->data_tx_tfm = - crypto_alloc_tfm("crc32c", 0); - if (!tcp_conn->data_tx_tfm) - return -ENOMEM; - if (!tcp_conn->data_rx_tfm) - tcp_conn->data_rx_tfm = - crypto_alloc_tfm("crc32c", 0); - if (!tcp_conn->data_rx_tfm) { - crypto_free_tfm(tcp_conn->data_tx_tfm); - return -ENOMEM; - } - } else { - if (tcp_conn->data_tx_tfm) - crypto_free_tfm(tcp_conn->data_tx_tfm); - if (tcp_conn->data_rx_tfm) - crypto_free_tfm(tcp_conn->data_rx_tfm); - } + iscsi_set_param(cls_conn, param, buf, buflen); tcp_conn->sendpage = conn->datadgst_en ? sock_no_sendpage : tcp_conn->sock->ops->sendpage; break; - case ISCSI_PARAM_INITIAL_R2T_EN: - session->initial_r2t_en = value; - break; case ISCSI_PARAM_MAX_R2T: + sscanf(buf, "%d", &value); if (session->max_r2t == roundup_pow_of_two(value)) break; iscsi_r2tpool_free(session); - session->max_r2t = value; + iscsi_set_param(cls_conn, param, buf, buflen); if (session->max_r2t & (session->max_r2t - 1)) session->max_r2t = roundup_pow_of_two(session->max_r2t); if (iscsi_r2tpool_alloc(session)) return -ENOMEM; break; - case ISCSI_PARAM_IMM_DATA_EN: - session->imm_data_en = value; - break; - case ISCSI_PARAM_FIRST_BURST: - session->first_burst = value; - break; - case ISCSI_PARAM_MAX_BURST: - session->max_burst = value; - break; - case ISCSI_PARAM_PDU_INORDER_EN: - session->pdu_inorder_en = value; - break; - case ISCSI_PARAM_DATASEQ_INORDER_EN: - session->dataseq_inorder_en = value; - break; - case ISCSI_PARAM_ERL: - session->erl = value; - break; - case ISCSI_PARAM_IFMARKER_EN: - BUG_ON(value); - session->ifmarker_en = value; - break; - case ISCSI_PARAM_OFMARKER_EN: - BUG_ON(value); - session->ofmarker_en = value; - break; - case ISCSI_PARAM_EXP_STATSN: - conn->exp_statsn = value; - break; - default: - break; - } - - return 0; -} - -static int -iscsi_session_get_param(struct iscsi_cls_session *cls_session, - enum iscsi_param param, uint32_t *value) -{ - struct Scsi_Host *shost = iscsi_session_to_shost(cls_session); - struct iscsi_session *session = iscsi_hostdata(shost->hostdata); - - switch(param) { - case ISCSI_PARAM_INITIAL_R2T_EN: - *value = session->initial_r2t_en; - break; - case ISCSI_PARAM_MAX_R2T: - *value = session->max_r2t; - break; - case ISCSI_PARAM_IMM_DATA_EN: - *value = session->imm_data_en; - break; - case ISCSI_PARAM_FIRST_BURST: - *value = session->first_burst; - break; - case ISCSI_PARAM_MAX_BURST: - *value = session->max_burst; - break; - case ISCSI_PARAM_PDU_INORDER_EN: - *value = session->pdu_inorder_en; - break; - case ISCSI_PARAM_DATASEQ_INORDER_EN: - *value = session->dataseq_inorder_en; - break; - case ISCSI_PARAM_ERL: - *value = session->erl; - break; - case ISCSI_PARAM_IFMARKER_EN: - *value = session->ifmarker_en; - break; - case ISCSI_PARAM_OFMARKER_EN: - *value = session->ofmarker_en; - break; default: - return -EINVAL; + return iscsi_set_param(cls_conn, param, buf, buflen); } return 0; } static int -iscsi_conn_get_param(struct iscsi_cls_conn *cls_conn, - enum iscsi_param param, uint32_t *value) +iscsi_tcp_conn_get_param(struct iscsi_cls_conn *cls_conn, + enum iscsi_param param, char *buf) { struct iscsi_conn *conn = cls_conn->dd_data; struct iscsi_tcp_conn *tcp_conn = conn->dd_data; struct inet_sock *inet; + struct ipv6_pinfo *np; + struct sock *sk; + int len; switch(param) { - case ISCSI_PARAM_MAX_RECV_DLENGTH: - *value = conn->max_recv_dlength; - break; - case ISCSI_PARAM_MAX_XMIT_DLENGTH: - *value = conn->max_xmit_dlength; - break; - case ISCSI_PARAM_HDRDGST_EN: - *value = conn->hdrdgst_en; - break; - case ISCSI_PARAM_DATADGST_EN: - *value = conn->datadgst_en; - break; case ISCSI_PARAM_CONN_PORT: mutex_lock(&conn->xmitmutex); if (!tcp_conn->sock) { @@ -2343,30 +2035,9 @@ iscsi_conn_get_param(struct iscsi_cls_conn *cls_conn, } inet = inet_sk(tcp_conn->sock->sk); - *value = be16_to_cpu(inet->dport); + len = sprintf(buf, "%hu\n", be16_to_cpu(inet->dport)); mutex_unlock(&conn->xmitmutex); - case ISCSI_PARAM_EXP_STATSN: - *value = conn->exp_statsn; break; - default: - return -EINVAL; - } - - return 0; -} - -static int -iscsi_conn_get_str_param(struct iscsi_cls_conn *cls_conn, - enum iscsi_param param, char *buf) -{ - struct iscsi_conn *conn = cls_conn->dd_data; - struct iscsi_tcp_conn *tcp_conn = conn->dd_data; - struct sock *sk; - struct inet_sock *inet; - struct ipv6_pinfo *np; - int len = 0; - - switch (param) { case ISCSI_PARAM_CONN_ADDRESS: mutex_lock(&conn->xmitmutex); if (!tcp_conn->sock) { @@ -2388,7 +2059,7 @@ iscsi_conn_get_str_param(struct iscsi_cls_conn *cls_conn, mutex_unlock(&conn->xmitmutex); break; default: - return -EINVAL; + return iscsi_conn_get_param(cls_conn, param, buf); } return len; @@ -2468,8 +2139,7 @@ static void iscsi_tcp_session_destroy(struct iscsi_cls_session *cls_session) } static struct scsi_host_template iscsi_sht = { - .name = "iSCSI Initiator over TCP/IP, v" - ISCSI_TCP_VERSION, + .name = "iSCSI Initiator over TCP/IP", .queuecommand = iscsi_queuecommand, .change_queue_depth = iscsi_change_queue_depth, .can_queue = ISCSI_XMIT_CMDS_MAX - 1, @@ -2501,7 +2171,11 @@ static struct iscsi_transport iscsi_tcp_transport = { ISCSI_ERL | ISCSI_CONN_PORT | ISCSI_CONN_ADDRESS | - ISCSI_EXP_STATSN, + ISCSI_EXP_STATSN | + ISCSI_PERSISTENT_PORT | + ISCSI_PERSISTENT_ADDRESS | + ISCSI_TARGET_NAME | + ISCSI_TPGT, .host_template = &iscsi_sht, .conndata_size = sizeof(struct iscsi_conn), .max_conn = 1, @@ -2514,14 +2188,10 @@ static struct iscsi_transport iscsi_tcp_transport = { .bind_conn = iscsi_tcp_conn_bind, .destroy_conn = iscsi_tcp_conn_destroy, .set_param = iscsi_conn_set_param, - .get_conn_param = iscsi_conn_get_param, - .get_conn_str_param = iscsi_conn_get_str_param, + .get_conn_param = iscsi_tcp_conn_get_param, .get_session_param = iscsi_session_get_param, .start_conn = iscsi_conn_start, - .stop_conn = iscsi_conn_stop, - /* these are called as part of conn recovery */ - .suspend_conn_recv = iscsi_tcp_suspend_conn_rx, - .terminate_conn = iscsi_tcp_terminate_conn, + .stop_conn = iscsi_tcp_conn_stop, /* IO */ .send_pdu = iscsi_conn_send_pdu, .get_stats = iscsi_conn_get_stats, diff --git a/drivers/scsi/iscsi_tcp.h b/drivers/scsi/iscsi_tcp.h index 808302832e6..32736831790 100644 --- a/drivers/scsi/iscsi_tcp.h +++ b/drivers/scsi/iscsi_tcp.h @@ -31,26 +31,25 @@ #define IN_PROGRESS_DDIGEST_RECV 0x3 /* xmit state machine */ -#define XMSTATE_IDLE 0x0 -#define XMSTATE_R_HDR 0x1 -#define XMSTATE_W_HDR 0x2 -#define XMSTATE_IMM_HDR 0x4 -#define XMSTATE_IMM_DATA 0x8 -#define XMSTATE_UNS_INIT 0x10 -#define XMSTATE_UNS_HDR 0x20 -#define XMSTATE_UNS_DATA 0x40 -#define XMSTATE_SOL_HDR 0x80 -#define XMSTATE_SOL_DATA 0x100 -#define XMSTATE_W_PAD 0x200 -#define XMSTATE_DATA_DIGEST 0x400 - -#define ISCSI_CONN_RCVBUF_MIN 262144 -#define ISCSI_CONN_SNDBUF_MIN 262144 +#define XMSTATE_IDLE 0x0 +#define XMSTATE_R_HDR 0x1 +#define XMSTATE_W_HDR 0x2 +#define XMSTATE_IMM_HDR 0x4 +#define XMSTATE_IMM_DATA 0x8 +#define XMSTATE_UNS_INIT 0x10 +#define XMSTATE_UNS_HDR 0x20 +#define XMSTATE_UNS_DATA 0x40 +#define XMSTATE_SOL_HDR 0x80 +#define XMSTATE_SOL_DATA 0x100 +#define XMSTATE_W_PAD 0x200 +#define XMSTATE_W_RESEND_PAD 0x400 +#define XMSTATE_W_RESEND_DATA_DIGEST 0x800 + #define ISCSI_PAD_LEN 4 -#define ISCSI_R2T_MAX 16 #define ISCSI_SG_TABLESIZE SG_ALL #define ISCSI_TCP_MAX_CMD_LEN 16 +struct crypto_hash; struct socket; /* Socket connection recieve helper */ @@ -78,17 +77,12 @@ struct iscsi_tcp_conn { char hdrext[4*sizeof(__u16) + sizeof(__u32)]; int data_copied; - char *data; /* data placeholder */ - int data_size; /* actual recv_dlength */ int stop_stage; /* conn_stop() flag: * * stop to recover, * * stop to terminate */ /* iSCSI connection-wide sequencing */ int hdr_size; /* PDU header size */ - struct crypto_tfm *rx_tfm; /* CRC32C (Rx) */ - struct crypto_tfm *data_rx_tfm; /* CRC32C (Rx) for data */ - /* control data */ struct iscsi_tcp_recv in; /* TCP receive context */ int in_progress; /* connection state machine */ @@ -98,9 +92,9 @@ struct iscsi_tcp_conn { void (*old_state_change)(struct sock *); void (*old_write_space)(struct sock *); - /* xmit */ - struct crypto_tfm *tx_tfm; /* CRC32C (Tx) */ - struct crypto_tfm *data_tx_tfm; /* CRC32C (Tx) for data */ + /* data and header digests */ + struct hash_desc tx_hash; /* CRC32C (Tx) */ + struct hash_desc rx_hash; /* CRC32C (Rx) */ /* MIB custom statistics */ uint32_t sendpage_failures_cnt; @@ -159,19 +153,15 @@ struct iscsi_tcp_cmd_task { struct scatterlist *bad_sg; /* assert statement */ int sg_count; /* SG's to process */ uint32_t exp_r2tsn; - int r2t_data_count; /* R2T Data-Out bytes */ int data_offset; struct iscsi_r2t_info *r2t; /* in progress R2T */ struct iscsi_queue r2tpool; struct kfifo *r2tqueue; struct iscsi_r2t_info **r2ts; - uint32_t datadigest; /* for recover digest */ int digest_count; uint32_t immdigest; /* for imm data */ struct iscsi_buf immbuf; /* for imm data digest */ - struct iscsi_data_task *dtask; /* data task in progress*/ struct iscsi_data_task unsol_dtask; /* unsol data task */ - int digest_offset; /* for partial buff digest */ }; #endif /* ISCSI_H */ diff --git a/drivers/scsi/jazz_esp.c b/drivers/scsi/jazz_esp.c index fc031c76dad..bfac4441d89 100644 --- a/drivers/scsi/jazz_esp.c +++ b/drivers/scsi/jazz_esp.c @@ -131,7 +131,7 @@ static int jazz_esp_detect(struct scsi_host_template *tpnt) esp->esp_command_dvma = vdma_alloc(CPHYSADDR(cmd_buffer), sizeof (cmd_buffer)); esp->irq = JAZZ_SCSI_IRQ; - request_irq(JAZZ_SCSI_IRQ, esp_intr, SA_INTERRUPT, "JAZZ SCSI", + request_irq(JAZZ_SCSI_IRQ, esp_intr, IRQF_DISABLED, "JAZZ SCSI", esp->ehost); /* @@ -257,7 +257,7 @@ static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, struct scsi_cmnd *sp) static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, struct scsi_cmnd *sp) { int sz = sp->use_sg - 1; - struct scatterlist *sg = (struct scatterlist *)sp->buffer; + struct scatterlist *sg = (struct scatterlist *)sp->request_buffer; while(sz >= 0) { vdma_free(sg[sz].dma_address); diff --git a/drivers/scsi/lasi700.c b/drivers/scsi/lasi700.c index eb7bd310cc8..f0871c3ac3d 100644 --- a/drivers/scsi/lasi700.c +++ b/drivers/scsi/lasi700.c @@ -131,7 +131,7 @@ lasi700_probe(struct parisc_device *dev) host->this_id = 7; host->base = base; host->irq = dev->irq; - if(request_irq(dev->irq, NCR_700_intr, SA_SHIRQ, "lasi700", host)) { + if(request_irq(dev->irq, NCR_700_intr, IRQF_SHARED, "lasi700", host)) { printk(KERN_ERR "lasi700: request_irq failed!\n"); goto out_put_host; } diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c deleted file mode 100644 index 004e1a0d8b7..00000000000 --- a/drivers/scsi/libata-bmdma.c +++ /dev/null @@ -1,1150 +0,0 @@ -/* - * libata-bmdma.c - helper library for PCI IDE BMDMA - * - * Maintained by: Jeff Garzik <jgarzik@pobox.com> - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2003-2006 Red Hat, Inc. All rights reserved. - * Copyright 2003-2006 Jeff Garzik - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available from http://www.t13.org/ and - * http://www.sata-io.org/ - * - */ - -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/libata.h> - -#include "libata.h" - -/** - * ata_tf_load_pio - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Outputs ATA taskfile to standard ATA host controller. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - if (tf->ctl != ap->last_ctl) { - outb(tf->ctl, ioaddr->ctl_addr); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); - } - - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - outb(tf->hob_feature, ioaddr->feature_addr); - outb(tf->hob_nsect, ioaddr->nsect_addr); - outb(tf->hob_lbal, ioaddr->lbal_addr); - outb(tf->hob_lbam, ioaddr->lbam_addr); - outb(tf->hob_lbah, ioaddr->lbah_addr); - VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", - tf->hob_feature, - tf->hob_nsect, - tf->hob_lbal, - tf->hob_lbam, - tf->hob_lbah); - } - - if (is_addr) { - outb(tf->feature, ioaddr->feature_addr); - outb(tf->nsect, ioaddr->nsect_addr); - outb(tf->lbal, ioaddr->lbal_addr); - outb(tf->lbam, ioaddr->lbam_addr); - outb(tf->lbah, ioaddr->lbah_addr); - VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", - tf->feature, - tf->nsect, - tf->lbal, - tf->lbam, - tf->lbah); - } - - if (tf->flags & ATA_TFLAG_DEVICE) { - outb(tf->device, ioaddr->device_addr); - VPRINTK("device 0x%X\n", tf->device); - } - - ata_wait_idle(ap); -} - -/** - * ata_tf_load_mmio - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Outputs ATA taskfile to standard ATA host controller using MMIO. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - if (tf->ctl != ap->last_ctl) { - writeb(tf->ctl, (void __iomem *) ap->ioaddr.ctl_addr); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); - } - - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - writeb(tf->hob_feature, (void __iomem *) ioaddr->feature_addr); - writeb(tf->hob_nsect, (void __iomem *) ioaddr->nsect_addr); - writeb(tf->hob_lbal, (void __iomem *) ioaddr->lbal_addr); - writeb(tf->hob_lbam, (void __iomem *) ioaddr->lbam_addr); - writeb(tf->hob_lbah, (void __iomem *) ioaddr->lbah_addr); - VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", - tf->hob_feature, - tf->hob_nsect, - tf->hob_lbal, - tf->hob_lbam, - tf->hob_lbah); - } - - if (is_addr) { - writeb(tf->feature, (void __iomem *) ioaddr->feature_addr); - writeb(tf->nsect, (void __iomem *) ioaddr->nsect_addr); - writeb(tf->lbal, (void __iomem *) ioaddr->lbal_addr); - writeb(tf->lbam, (void __iomem *) ioaddr->lbam_addr); - writeb(tf->lbah, (void __iomem *) ioaddr->lbah_addr); - VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", - tf->feature, - tf->nsect, - tf->lbal, - tf->lbam, - tf->lbah); - } - - if (tf->flags & ATA_TFLAG_DEVICE) { - writeb(tf->device, (void __iomem *) ioaddr->device_addr); - VPRINTK("device 0x%X\n", tf->device); - } - - ata_wait_idle(ap); -} - - -/** - * ata_tf_load - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Outputs ATA taskfile to standard ATA host controller using MMIO - * or PIO as indicated by the ATA_FLAG_MMIO flag. - * Writes the control, feature, nsect, lbal, lbam, and lbah registers. - * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect, - * hob_lbal, hob_lbam, and hob_lbah. - * - * This function waits for idle (!BUSY and !DRQ) after writing - * registers. If the control register has a new value, this - * function also waits for idle after writing control and before - * writing the remaining registers. - * - * May be used as the tf_load() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) -{ - if (ap->flags & ATA_FLAG_MMIO) - ata_tf_load_mmio(ap, tf); - else - ata_tf_load_pio(ap, tf); -} - -/** - * ata_exec_command_pio - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues PIO write to ATA command register, with proper - * synchronization with interrupt handler / other threads. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); - - outb(tf->command, ap->ioaddr.command_addr); - ata_pause(ap); -} - - -/** - * ata_exec_command_mmio - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues MMIO write to ATA command register, with proper - * synchronization with interrupt handler / other threads. - * - * FIXME: missing write posting for 400nS delay enforcement - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); - - writeb(tf->command, (void __iomem *) ap->ioaddr.command_addr); - ata_pause(ap); -} - - -/** - * ata_exec_command - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues PIO/MMIO write to ATA command register, with proper - * synchronization with interrupt handler / other threads. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) -{ - if (ap->flags & ATA_FLAG_MMIO) - ata_exec_command_mmio(ap, tf); - else - ata_exec_command_pio(ap, tf); -} - -/** - * ata_tf_read_pio - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Reads ATA taskfile registers for currently-selected device - * into @tf. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - tf->command = ata_check_status(ap); - tf->feature = inb(ioaddr->error_addr); - tf->nsect = inb(ioaddr->nsect_addr); - tf->lbal = inb(ioaddr->lbal_addr); - tf->lbam = inb(ioaddr->lbam_addr); - tf->lbah = inb(ioaddr->lbah_addr); - tf->device = inb(ioaddr->device_addr); - - if (tf->flags & ATA_TFLAG_LBA48) { - outb(tf->ctl | ATA_HOB, ioaddr->ctl_addr); - tf->hob_feature = inb(ioaddr->error_addr); - tf->hob_nsect = inb(ioaddr->nsect_addr); - tf->hob_lbal = inb(ioaddr->lbal_addr); - tf->hob_lbam = inb(ioaddr->lbam_addr); - tf->hob_lbah = inb(ioaddr->lbah_addr); - } -} - -/** - * ata_tf_read_mmio - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Reads ATA taskfile registers for currently-selected device - * into @tf via MMIO. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - tf->command = ata_check_status(ap); - tf->feature = readb((void __iomem *)ioaddr->error_addr); - tf->nsect = readb((void __iomem *)ioaddr->nsect_addr); - tf->lbal = readb((void __iomem *)ioaddr->lbal_addr); - tf->lbam = readb((void __iomem *)ioaddr->lbam_addr); - tf->lbah = readb((void __iomem *)ioaddr->lbah_addr); - tf->device = readb((void __iomem *)ioaddr->device_addr); - - if (tf->flags & ATA_TFLAG_LBA48) { - writeb(tf->ctl | ATA_HOB, (void __iomem *) ap->ioaddr.ctl_addr); - tf->hob_feature = readb((void __iomem *)ioaddr->error_addr); - tf->hob_nsect = readb((void __iomem *)ioaddr->nsect_addr); - tf->hob_lbal = readb((void __iomem *)ioaddr->lbal_addr); - tf->hob_lbam = readb((void __iomem *)ioaddr->lbam_addr); - tf->hob_lbah = readb((void __iomem *)ioaddr->lbah_addr); - } -} - - -/** - * ata_tf_read - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Reads ATA taskfile registers for currently-selected device - * into @tf. - * - * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48 - * is set, also reads the hob registers. - * - * May be used as the tf_read() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) -{ - if (ap->flags & ATA_FLAG_MMIO) - ata_tf_read_mmio(ap, tf); - else - ata_tf_read_pio(ap, tf); -} - -/** - * ata_check_status_pio - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Reads ATA taskfile status register for currently-selected device - * and return its value. This also clears pending interrupts - * from this device - * - * LOCKING: - * Inherited from caller. - */ -static u8 ata_check_status_pio(struct ata_port *ap) -{ - return inb(ap->ioaddr.status_addr); -} - -/** - * ata_check_status_mmio - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Reads ATA taskfile status register for currently-selected device - * via MMIO and return its value. This also clears pending interrupts - * from this device - * - * LOCKING: - * Inherited from caller. - */ -static u8 ata_check_status_mmio(struct ata_port *ap) -{ - return readb((void __iomem *) ap->ioaddr.status_addr); -} - - -/** - * ata_check_status - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Reads ATA taskfile status register for currently-selected device - * and return its value. This also clears pending interrupts - * from this device - * - * May be used as the check_status() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -u8 ata_check_status(struct ata_port *ap) -{ - if (ap->flags & ATA_FLAG_MMIO) - return ata_check_status_mmio(ap); - return ata_check_status_pio(ap); -} - - -/** - * ata_altstatus - Read device alternate status reg - * @ap: port where the device is - * - * Reads ATA taskfile alternate status register for - * currently-selected device and return its value. - * - * Note: may NOT be used as the check_altstatus() entry in - * ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -u8 ata_altstatus(struct ata_port *ap) -{ - if (ap->ops->check_altstatus) - return ap->ops->check_altstatus(ap); - - if (ap->flags & ATA_FLAG_MMIO) - return readb((void __iomem *)ap->ioaddr.altstatus_addr); - return inb(ap->ioaddr.altstatus_addr); -} - -/** - * ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_bmdma_setup_mmio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); - u8 dmactl; - void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; - - /* load PRD table addr. */ - mb(); /* make sure PRD table writes are visible to controller */ - writel(ap->prd_dma, mmio + ATA_DMA_TABLE_OFS); - - /* specify data direction, triple-check start bit is clear */ - dmactl = readb(mmio + ATA_DMA_CMD); - dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); - if (!rw) - dmactl |= ATA_DMA_WR; - writeb(dmactl, mmio + ATA_DMA_CMD); - - /* issue r/w command */ - ap->ops->exec_command(ap, &qc->tf); -} - -/** - * ata_bmdma_start_mmio - Start a PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_bmdma_start_mmio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; - u8 dmactl; - - /* start host DMA transaction */ - dmactl = readb(mmio + ATA_DMA_CMD); - writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD); - - /* Strictly, one may wish to issue a readb() here, to - * flush the mmio write. However, control also passes - * to the hardware at this point, and it will interrupt - * us when we are to resume control. So, in effect, - * we don't care when the mmio write flushes. - * Further, a read of the DMA status register _immediately_ - * following the write may not be what certain flaky hardware - * is expected, so I think it is best to not add a readb() - * without first all the MMIO ATA cards/mobos. - * Or maybe I'm just being paranoid. - */ -} - -/** - * ata_bmdma_setup_pio - Set up PCI IDE BMDMA transaction (PIO) - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_bmdma_setup_pio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); - u8 dmactl; - - /* load PRD table addr. */ - outl(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS); - - /* specify data direction, triple-check start bit is clear */ - dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); - if (!rw) - dmactl |= ATA_DMA_WR; - outb(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - - /* issue r/w command */ - ap->ops->exec_command(ap, &qc->tf); -} - -/** - * ata_bmdma_start_pio - Start a PCI IDE BMDMA transaction (PIO) - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_bmdma_start_pio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - u8 dmactl; - - /* start host DMA transaction */ - dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - outb(dmactl | ATA_DMA_START, - ap->ioaddr.bmdma_addr + ATA_DMA_CMD); -} - - -/** - * ata_bmdma_start - Start a PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * Writes the ATA_DMA_START flag to the DMA command register. - * - * May be used as the bmdma_start() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_bmdma_start(struct ata_queued_cmd *qc) -{ - if (qc->ap->flags & ATA_FLAG_MMIO) - ata_bmdma_start_mmio(qc); - else - ata_bmdma_start_pio(qc); -} - - -/** - * ata_bmdma_setup - Set up PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * Writes address of PRD table to device's PRD Table Address - * register, sets the DMA control register, and calls - * ops->exec_command() to start the transfer. - * - * May be used as the bmdma_setup() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_bmdma_setup(struct ata_queued_cmd *qc) -{ - if (qc->ap->flags & ATA_FLAG_MMIO) - ata_bmdma_setup_mmio(qc); - else - ata_bmdma_setup_pio(qc); -} - - -/** - * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt. - * @ap: Port associated with this ATA transaction. - * - * Clear interrupt and error flags in DMA status register. - * - * May be used as the irq_clear() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -void ata_bmdma_irq_clear(struct ata_port *ap) -{ - if (!ap->ioaddr.bmdma_addr) - return; - - if (ap->flags & ATA_FLAG_MMIO) { - void __iomem *mmio = - ((void __iomem *) ap->ioaddr.bmdma_addr) + ATA_DMA_STATUS; - writeb(readb(mmio), mmio); - } else { - unsigned long addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS; - outb(inb(addr), addr); - } -} - - -/** - * ata_bmdma_status - Read PCI IDE BMDMA status - * @ap: Port associated with this ATA transaction. - * - * Read and return BMDMA status register. - * - * May be used as the bmdma_status() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -u8 ata_bmdma_status(struct ata_port *ap) -{ - u8 host_stat; - if (ap->flags & ATA_FLAG_MMIO) { - void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; - host_stat = readb(mmio + ATA_DMA_STATUS); - } else - host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); - return host_stat; -} - - -/** - * ata_bmdma_stop - Stop PCI IDE BMDMA transfer - * @qc: Command we are ending DMA for - * - * Clears the ATA_DMA_START flag in the dma control register - * - * May be used as the bmdma_stop() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -void ata_bmdma_stop(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - if (ap->flags & ATA_FLAG_MMIO) { - void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; - - /* clear start/stop bit */ - writeb(readb(mmio + ATA_DMA_CMD) & ~ATA_DMA_START, - mmio + ATA_DMA_CMD); - } else { - /* clear start/stop bit */ - outb(inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD) & ~ATA_DMA_START, - ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - } - - /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ - ata_altstatus(ap); /* dummy read */ -} - -/** - * ata_bmdma_freeze - Freeze BMDMA controller port - * @ap: port to freeze - * - * Freeze BMDMA controller port. - * - * LOCKING: - * Inherited from caller. - */ -void ata_bmdma_freeze(struct ata_port *ap) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - ap->ctl |= ATA_NIEN; - ap->last_ctl = ap->ctl; - - if (ap->flags & ATA_FLAG_MMIO) - writeb(ap->ctl, (void __iomem *)ioaddr->ctl_addr); - else - outb(ap->ctl, ioaddr->ctl_addr); -} - -/** - * ata_bmdma_thaw - Thaw BMDMA controller port - * @ap: port to thaw - * - * Thaw BMDMA controller port. - * - * LOCKING: - * Inherited from caller. - */ -void ata_bmdma_thaw(struct ata_port *ap) -{ - /* clear & re-enable interrupts */ - ata_chk_status(ap); - ap->ops->irq_clear(ap); - if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ - ata_irq_on(ap); -} - -/** - * ata_bmdma_drive_eh - Perform EH with given methods for BMDMA controller - * @ap: port to handle error for - * @prereset: prereset method (can be NULL) - * @softreset: softreset method (can be NULL) - * @hardreset: hardreset method (can be NULL) - * @postreset: postreset method (can be NULL) - * - * Handle error for ATA BMDMA controller. It can handle both - * PATA and SATA controllers. Many controllers should be able to - * use this EH as-is or with some added handling before and - * after. - * - * This function is intended to be used for constructing - * ->error_handler callback by low level drivers. - * - * LOCKING: - * Kernel thread context (may sleep) - */ -void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset, - ata_reset_fn_t softreset, ata_reset_fn_t hardreset, - ata_postreset_fn_t postreset) -{ - struct ata_eh_context *ehc = &ap->eh_context; - struct ata_queued_cmd *qc; - unsigned long flags; - int thaw = 0; - - qc = __ata_qc_from_tag(ap, ap->active_tag); - if (qc && !(qc->flags & ATA_QCFLAG_FAILED)) - qc = NULL; - - /* reset PIO HSM and stop DMA engine */ - spin_lock_irqsave(ap->lock, flags); - - ap->hsm_task_state = HSM_ST_IDLE; - - if (qc && (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_DMA)) { - u8 host_stat; - - host_stat = ata_bmdma_status(ap); - - ata_ehi_push_desc(&ehc->i, "BMDMA stat 0x%x", host_stat); - - /* BMDMA controllers indicate host bus error by - * setting DMA_ERR bit and timing out. As it wasn't - * really a timeout event, adjust error mask and - * cancel frozen state. - */ - if (qc->err_mask == AC_ERR_TIMEOUT && host_stat & ATA_DMA_ERR) { - qc->err_mask = AC_ERR_HOST_BUS; - thaw = 1; - } - - ap->ops->bmdma_stop(qc); - } - - ata_altstatus(ap); - ata_chk_status(ap); - ap->ops->irq_clear(ap); - - spin_unlock_irqrestore(ap->lock, flags); - - if (thaw) - ata_eh_thaw_port(ap); - - /* PIO and DMA engines have been stopped, perform recovery */ - ata_do_eh(ap, prereset, softreset, hardreset, postreset); -} - -/** - * ata_bmdma_error_handler - Stock error handler for BMDMA controller - * @ap: port to handle error for - * - * Stock error handler for BMDMA controller. - * - * LOCKING: - * Kernel thread context (may sleep) - */ -void ata_bmdma_error_handler(struct ata_port *ap) -{ - ata_reset_fn_t hardreset; - - hardreset = NULL; - if (sata_scr_valid(ap)) - hardreset = sata_std_hardreset; - - ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, hardreset, - ata_std_postreset); -} - -/** - * ata_bmdma_post_internal_cmd - Stock post_internal_cmd for - * BMDMA controller - * @qc: internal command to clean up - * - * LOCKING: - * Kernel thread context (may sleep) - */ -void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc) -{ - ata_bmdma_stop(qc); -} - -#ifdef CONFIG_PCI -static struct ata_probe_ent * -ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) -{ - struct ata_probe_ent *probe_ent; - - probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); - if (!probe_ent) { - printk(KERN_ERR DRV_NAME "(%s): out of memory\n", - kobject_name(&(dev->kobj))); - return NULL; - } - - INIT_LIST_HEAD(&probe_ent->node); - probe_ent->dev = dev; - - probe_ent->sht = port->sht; - probe_ent->host_flags = port->host_flags; - probe_ent->pio_mask = port->pio_mask; - probe_ent->mwdma_mask = port->mwdma_mask; - probe_ent->udma_mask = port->udma_mask; - probe_ent->port_ops = port->port_ops; - - return probe_ent; -} - - -/** - * ata_pci_init_native_mode - Initialize native-mode driver - * @pdev: pci device to be initialized - * @port: array[2] of pointers to port info structures. - * @ports: bitmap of ports present - * - * Utility function which allocates and initializes an - * ata_probe_ent structure for a standard dual-port - * PIO-based IDE controller. The returned ata_probe_ent - * structure can be passed to ata_device_add(). The returned - * ata_probe_ent structure should then be freed with kfree(). - * - * The caller need only pass the address of the primary port, the - * secondary will be deduced automatically. If the device has non - * standard secondary port mappings this function can be called twice, - * once for each interface. - */ - -struct ata_probe_ent * -ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports) -{ - struct ata_probe_ent *probe_ent = - ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); - int p = 0; - unsigned long bmdma; - - if (!probe_ent) - return NULL; - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = SA_SHIRQ; - probe_ent->private_data = port[0]->private_data; - - if (ports & ATA_PORT_PRIMARY) { - probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0); - probe_ent->port[p].altstatus_addr = - probe_ent->port[p].ctl_addr = - pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS; - bmdma = pci_resource_start(pdev, 4); - if (bmdma) { - if (inb(bmdma + 2) & 0x80) - probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; - probe_ent->port[p].bmdma_addr = bmdma; - } - ata_std_ports(&probe_ent->port[p]); - p++; - } - - if (ports & ATA_PORT_SECONDARY) { - probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2); - probe_ent->port[p].altstatus_addr = - probe_ent->port[p].ctl_addr = - pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS; - bmdma = pci_resource_start(pdev, 4); - if (bmdma) { - bmdma += 8; - if(inb(bmdma + 2) & 0x80) - probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; - probe_ent->port[p].bmdma_addr = bmdma; - } - ata_std_ports(&probe_ent->port[p]); - p++; - } - - probe_ent->n_ports = p; - return probe_ent; -} - - -static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, - struct ata_port_info *port, int port_num) -{ - struct ata_probe_ent *probe_ent; - unsigned long bmdma; - - probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port); - if (!probe_ent) - return NULL; - - probe_ent->legacy_mode = 1; - probe_ent->n_ports = 1; - probe_ent->hard_port_no = port_num; - probe_ent->private_data = port->private_data; - - switch(port_num) - { - case 0: - probe_ent->irq = 14; - probe_ent->port[0].cmd_addr = 0x1f0; - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = 0x3f6; - break; - case 1: - probe_ent->irq = 15; - probe_ent->port[0].cmd_addr = 0x170; - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = 0x376; - break; - } - - bmdma = pci_resource_start(pdev, 4); - if (bmdma != 0) { - bmdma += 8 * port_num; - probe_ent->port[0].bmdma_addr = bmdma; - if (inb(bmdma + 2) & 0x80) - probe_ent->host_set_flags |= ATA_HOST_SIMPLEX; - } - ata_std_ports(&probe_ent->port[0]); - - return probe_ent; -} - - -/** - * ata_pci_init_one - Initialize/register PCI IDE host controller - * @pdev: Controller to be initialized - * @port_info: Information from low-level host driver - * @n_ports: Number of ports attached to host controller - * - * This is a helper function which can be called from a driver's - * xxx_init_one() probe function if the hardware uses traditional - * IDE taskfile registers. - * - * This function calls pci_enable_device(), reserves its register - * regions, sets the dma mask, enables bus master mode, and calls - * ata_device_add() - * - * LOCKING: - * Inherited from PCI layer (may sleep). - * - * RETURNS: - * Zero on success, negative on errno-based value on error. - */ - -int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, - unsigned int n_ports) -{ - struct ata_probe_ent *probe_ent = NULL, *probe_ent2 = NULL; - struct ata_port_info *port[2]; - u8 tmp8, mask; - unsigned int legacy_mode = 0; - int disable_dev_on_err = 1; - int rc; - - DPRINTK("ENTER\n"); - - port[0] = port_info[0]; - if (n_ports > 1) - port[1] = port_info[1]; - else - port[1] = port[0]; - - if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0 - && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { - /* TODO: What if one channel is in native mode ... */ - pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); - mask = (1 << 2) | (1 << 0); - if ((tmp8 & mask) != mask) - legacy_mode = (1 << 3); - } - - /* FIXME... */ - if ((!legacy_mode) && (n_ports > 2)) { - printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n"); - n_ports = 2; - /* For now */ - } - - /* FIXME: Really for ATA it isn't safe because the device may be - multi-purpose and we want to leave it alone if it was already - enabled. Secondly for shared use as Arjan says we want refcounting - - Checking dev->is_enabled is insufficient as this is not set at - boot for the primary video which is BIOS enabled - */ - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - disable_dev_on_err = 0; - goto err_out; - } - - /* FIXME: Should use platform specific mappers for legacy port ranges */ - if (legacy_mode) { - if (!request_region(0x1f0, 8, "libata")) { - struct resource *conflict, res; - res.start = 0x1f0; - res.end = 0x1f0 + 8 - 1; - conflict = ____request_resource(&ioport_resource, &res); - if (!strcmp(conflict->name, "libata")) - legacy_mode |= (1 << 0); - else { - disable_dev_on_err = 0; - printk(KERN_WARNING "ata: 0x1f0 IDE port busy\n"); - } - } else - legacy_mode |= (1 << 0); - - if (!request_region(0x170, 8, "libata")) { - struct resource *conflict, res; - res.start = 0x170; - res.end = 0x170 + 8 - 1; - conflict = ____request_resource(&ioport_resource, &res); - if (!strcmp(conflict->name, "libata")) - legacy_mode |= (1 << 1); - else { - disable_dev_on_err = 0; - printk(KERN_WARNING "ata: 0x170 IDE port busy\n"); - } - } else - legacy_mode |= (1 << 1); - } - - /* we have legacy mode, but all ports are unavailable */ - if (legacy_mode == (1 << 3)) { - rc = -EBUSY; - goto err_out_regions; - } - - /* FIXME: If we get no DMA mask we should fall back to PIO */ - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - if (legacy_mode) { - if (legacy_mode & (1 << 0)) - probe_ent = ata_pci_init_legacy_port(pdev, port[0], 0); - if (legacy_mode & (1 << 1)) - probe_ent2 = ata_pci_init_legacy_port(pdev, port[1], 1); - } else { - if (n_ports == 2) - probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); - else - probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY); - } - if (!probe_ent && !probe_ent2) { - rc = -ENOMEM; - goto err_out_regions; - } - - pci_set_master(pdev); - - /* FIXME: check ata_device_add return */ - if (legacy_mode) { - struct device *dev = &pdev->dev; - struct ata_host_set *host_set = NULL; - - if (legacy_mode & (1 << 0)) { - ata_device_add(probe_ent); - host_set = dev_get_drvdata(dev); - } - - if (legacy_mode & (1 << 1)) { - ata_device_add(probe_ent2); - if (host_set) { - host_set->next = dev_get_drvdata(dev); - dev_set_drvdata(dev, host_set); - } - } - } else - ata_device_add(probe_ent); - - kfree(probe_ent); - kfree(probe_ent2); - - return 0; - -err_out_regions: - if (legacy_mode & (1 << 0)) - release_region(0x1f0, 8); - if (legacy_mode & (1 << 1)) - release_region(0x170, 8); - pci_release_regions(pdev); -err_out: - if (disable_dev_on_err) - pci_disable_device(pdev); - return rc; -} - -/** - * ata_pci_clear_simplex - attempt to kick device out of simplex - * @pdev: PCI device - * - * Some PCI ATA devices report simplex mode but in fact can be told to - * enter non simplex mode. This implements the neccessary logic to - * perform the task on such devices. Calling it on other devices will - * have -undefined- behaviour. - */ - -int ata_pci_clear_simplex(struct pci_dev *pdev) -{ - unsigned long bmdma = pci_resource_start(pdev, 4); - u8 simplex; - - if (bmdma == 0) - return -ENOENT; - - simplex = inb(bmdma + 0x02); - outb(simplex & 0x60, bmdma + 0x02); - simplex = inb(bmdma + 0x02); - if (simplex & 0x80) - return -EOPNOTSUPP; - return 0; -} - -unsigned long ata_pci_default_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long xfer_mask) -{ - /* Filter out DMA modes if the device has been configured by - the BIOS as PIO only */ - - if (ap->ioaddr.bmdma_addr == 0) - xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); - return xfer_mask; -} - -#endif /* CONFIG_PCI */ - diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c deleted file mode 100644 index 6c66877be2b..00000000000 --- a/drivers/scsi/libata-core.c +++ /dev/null @@ -1,5916 +0,0 @@ -/* - * libata-core.c - helper library for ATA - * - * Maintained by: Jeff Garzik <jgarzik@pobox.com> - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2003-2004 Red Hat, Inc. All rights reserved. - * Copyright 2003-2004 Jeff Garzik - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available from http://www.t13.org/ and - * http://www.sata-io.org/ - * - */ - -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/list.h> -#include <linux/mm.h> -#include <linux/highmem.h> -#include <linux/spinlock.h> -#include <linux/blkdev.h> -#include <linux/delay.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/completion.h> -#include <linux/suspend.h> -#include <linux/workqueue.h> -#include <linux/jiffies.h> -#include <linux/scatterlist.h> -#include <scsi/scsi.h> -#include "scsi_priv.h" -#include <scsi/scsi_cmnd.h> -#include <scsi/scsi_host.h> -#include <linux/libata.h> -#include <asm/io.h> -#include <asm/semaphore.h> -#include <asm/byteorder.h> - -#include "libata.h" - -/* debounce timing parameters in msecs { interval, duration, timeout } */ -const unsigned long sata_deb_timing_boot[] = { 5, 100, 2000 }; -const unsigned long sata_deb_timing_eh[] = { 25, 500, 2000 }; -const unsigned long sata_deb_timing_before_fsrst[] = { 100, 2000, 5000 }; - -static unsigned int ata_dev_init_params(struct ata_device *dev, - u16 heads, u16 sectors); -static unsigned int ata_dev_set_xfermode(struct ata_device *dev); -static void ata_dev_xfermask(struct ata_device *dev); - -static unsigned int ata_unique_id = 1; -static struct workqueue_struct *ata_wq; - -struct workqueue_struct *ata_aux_wq; - -int atapi_enabled = 1; -module_param(atapi_enabled, int, 0444); -MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)"); - -int atapi_dmadir = 0; -module_param(atapi_dmadir, int, 0444); -MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)"); - -int libata_fua = 0; -module_param_named(fua, libata_fua, int, 0444); -MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)"); - -MODULE_AUTHOR("Jeff Garzik"); -MODULE_DESCRIPTION("Library module for ATA devices"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_VERSION); - - -/** - * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure - * @tf: Taskfile to convert - * @fis: Buffer into which data will output - * @pmp: Port multiplier port - * - * Converts a standard ATA taskfile to a Serial ATA - * FIS structure (Register - Host to Device). - * - * LOCKING: - * Inherited from caller. - */ - -void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp) -{ - fis[0] = 0x27; /* Register - Host to Device FIS */ - fis[1] = (pmp & 0xf) | (1 << 7); /* Port multiplier number, - bit 7 indicates Command FIS */ - fis[2] = tf->command; - fis[3] = tf->feature; - - fis[4] = tf->lbal; - fis[5] = tf->lbam; - fis[6] = tf->lbah; - fis[7] = tf->device; - - fis[8] = tf->hob_lbal; - fis[9] = tf->hob_lbam; - fis[10] = tf->hob_lbah; - fis[11] = tf->hob_feature; - - fis[12] = tf->nsect; - fis[13] = tf->hob_nsect; - fis[14] = 0; - fis[15] = tf->ctl; - - fis[16] = 0; - fis[17] = 0; - fis[18] = 0; - fis[19] = 0; -} - -/** - * ata_tf_from_fis - Convert SATA FIS to ATA taskfile - * @fis: Buffer from which data will be input - * @tf: Taskfile to output - * - * Converts a serial ATA FIS structure to a standard ATA taskfile. - * - * LOCKING: - * Inherited from caller. - */ - -void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf) -{ - tf->command = fis[2]; /* status */ - tf->feature = fis[3]; /* error */ - - tf->lbal = fis[4]; - tf->lbam = fis[5]; - tf->lbah = fis[6]; - tf->device = fis[7]; - - tf->hob_lbal = fis[8]; - tf->hob_lbam = fis[9]; - tf->hob_lbah = fis[10]; - - tf->nsect = fis[12]; - tf->hob_nsect = fis[13]; -} - -static const u8 ata_rw_cmds[] = { - /* pio multi */ - ATA_CMD_READ_MULTI, - ATA_CMD_WRITE_MULTI, - ATA_CMD_READ_MULTI_EXT, - ATA_CMD_WRITE_MULTI_EXT, - 0, - 0, - 0, - ATA_CMD_WRITE_MULTI_FUA_EXT, - /* pio */ - ATA_CMD_PIO_READ, - ATA_CMD_PIO_WRITE, - ATA_CMD_PIO_READ_EXT, - ATA_CMD_PIO_WRITE_EXT, - 0, - 0, - 0, - 0, - /* dma */ - ATA_CMD_READ, - ATA_CMD_WRITE, - ATA_CMD_READ_EXT, - ATA_CMD_WRITE_EXT, - 0, - 0, - 0, - ATA_CMD_WRITE_FUA_EXT -}; - -/** - * ata_rwcmd_protocol - set taskfile r/w commands and protocol - * @qc: command to examine and configure - * - * Examine the device configuration and tf->flags to calculate - * the proper read/write commands and protocol to use. - * - * LOCKING: - * caller. - */ -int ata_rwcmd_protocol(struct ata_queued_cmd *qc) -{ - struct ata_taskfile *tf = &qc->tf; - struct ata_device *dev = qc->dev; - u8 cmd; - - int index, fua, lba48, write; - - fua = (tf->flags & ATA_TFLAG_FUA) ? 4 : 0; - lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0; - write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0; - - if (dev->flags & ATA_DFLAG_PIO) { - tf->protocol = ATA_PROT_PIO; - index = dev->multi_count ? 0 : 8; - } else if (lba48 && (qc->ap->flags & ATA_FLAG_PIO_LBA48)) { - /* Unable to use DMA due to host limitation */ - tf->protocol = ATA_PROT_PIO; - index = dev->multi_count ? 0 : 8; - } else { - tf->protocol = ATA_PROT_DMA; - index = 16; - } - - cmd = ata_rw_cmds[index + fua + lba48 + write]; - if (cmd) { - tf->command = cmd; - return 0; - } - return -1; -} - -/** - * ata_pack_xfermask - Pack pio, mwdma and udma masks into xfer_mask - * @pio_mask: pio_mask - * @mwdma_mask: mwdma_mask - * @udma_mask: udma_mask - * - * Pack @pio_mask, @mwdma_mask and @udma_mask into a single - * unsigned int xfer_mask. - * - * LOCKING: - * None. - * - * RETURNS: - * Packed xfer_mask. - */ -static unsigned int ata_pack_xfermask(unsigned int pio_mask, - unsigned int mwdma_mask, - unsigned int udma_mask) -{ - return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) | - ((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) | - ((udma_mask << ATA_SHIFT_UDMA) & ATA_MASK_UDMA); -} - -/** - * ata_unpack_xfermask - Unpack xfer_mask into pio, mwdma and udma masks - * @xfer_mask: xfer_mask to unpack - * @pio_mask: resulting pio_mask - * @mwdma_mask: resulting mwdma_mask - * @udma_mask: resulting udma_mask - * - * Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask. - * Any NULL distination masks will be ignored. - */ -static void ata_unpack_xfermask(unsigned int xfer_mask, - unsigned int *pio_mask, - unsigned int *mwdma_mask, - unsigned int *udma_mask) -{ - if (pio_mask) - *pio_mask = (xfer_mask & ATA_MASK_PIO) >> ATA_SHIFT_PIO; - if (mwdma_mask) - *mwdma_mask = (xfer_mask & ATA_MASK_MWDMA) >> ATA_SHIFT_MWDMA; - if (udma_mask) - *udma_mask = (xfer_mask & ATA_MASK_UDMA) >> ATA_SHIFT_UDMA; -} - -static const struct ata_xfer_ent { - int shift, bits; - u8 base; -} ata_xfer_tbl[] = { - { ATA_SHIFT_PIO, ATA_BITS_PIO, XFER_PIO_0 }, - { ATA_SHIFT_MWDMA, ATA_BITS_MWDMA, XFER_MW_DMA_0 }, - { ATA_SHIFT_UDMA, ATA_BITS_UDMA, XFER_UDMA_0 }, - { -1, }, -}; - -/** - * ata_xfer_mask2mode - Find matching XFER_* for the given xfer_mask - * @xfer_mask: xfer_mask of interest - * - * Return matching XFER_* value for @xfer_mask. Only the highest - * bit of @xfer_mask is considered. - * - * LOCKING: - * None. - * - * RETURNS: - * Matching XFER_* value, 0 if no match found. - */ -static u8 ata_xfer_mask2mode(unsigned int xfer_mask) -{ - int highbit = fls(xfer_mask) - 1; - const struct ata_xfer_ent *ent; - - for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) - if (highbit >= ent->shift && highbit < ent->shift + ent->bits) - return ent->base + highbit - ent->shift; - return 0; -} - -/** - * ata_xfer_mode2mask - Find matching xfer_mask for XFER_* - * @xfer_mode: XFER_* of interest - * - * Return matching xfer_mask for @xfer_mode. - * - * LOCKING: - * None. - * - * RETURNS: - * Matching xfer_mask, 0 if no match found. - */ -static unsigned int ata_xfer_mode2mask(u8 xfer_mode) -{ - const struct ata_xfer_ent *ent; - - for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) - if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) - return 1 << (ent->shift + xfer_mode - ent->base); - return 0; -} - -/** - * ata_xfer_mode2shift - Find matching xfer_shift for XFER_* - * @xfer_mode: XFER_* of interest - * - * Return matching xfer_shift for @xfer_mode. - * - * LOCKING: - * None. - * - * RETURNS: - * Matching xfer_shift, -1 if no match found. - */ -static int ata_xfer_mode2shift(unsigned int xfer_mode) -{ - const struct ata_xfer_ent *ent; - - for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) - if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) - return ent->shift; - return -1; -} - -/** - * ata_mode_string - convert xfer_mask to string - * @xfer_mask: mask of bits supported; only highest bit counts. - * - * Determine string which represents the highest speed - * (highest bit in @modemask). - * - * LOCKING: - * None. - * - * RETURNS: - * Constant C string representing highest speed listed in - * @mode_mask, or the constant C string "<n/a>". - */ -static const char *ata_mode_string(unsigned int xfer_mask) -{ - static const char * const xfer_mode_str[] = { - "PIO0", - "PIO1", - "PIO2", - "PIO3", - "PIO4", - "MWDMA0", - "MWDMA1", - "MWDMA2", - "UDMA/16", - "UDMA/25", - "UDMA/33", - "UDMA/44", - "UDMA/66", - "UDMA/100", - "UDMA/133", - "UDMA7", - }; - int highbit; - - highbit = fls(xfer_mask) - 1; - if (highbit >= 0 && highbit < ARRAY_SIZE(xfer_mode_str)) - return xfer_mode_str[highbit]; - return "<n/a>"; -} - -static const char *sata_spd_string(unsigned int spd) -{ - static const char * const spd_str[] = { - "1.5 Gbps", - "3.0 Gbps", - }; - - if (spd == 0 || (spd - 1) >= ARRAY_SIZE(spd_str)) - return "<unknown>"; - return spd_str[spd - 1]; -} - -void ata_dev_disable(struct ata_device *dev) -{ - if (ata_dev_enabled(dev) && ata_msg_drv(dev->ap)) { - ata_dev_printk(dev, KERN_WARNING, "disabled\n"); - dev->class++; - } -} - -/** - * ata_pio_devchk - PATA device presence detection - * @ap: ATA channel to examine - * @device: Device to examine (starting at zero) - * - * This technique was originally described in - * Hale Landis's ATADRVR (www.ata-atapi.com), and - * later found its way into the ATA/ATAPI spec. - * - * Write a pattern to the ATA shadow registers, - * and if a device is present, it will respond by - * correctly storing and echoing back the - * ATA shadow register contents. - * - * LOCKING: - * caller. - */ - -static unsigned int ata_pio_devchk(struct ata_port *ap, - unsigned int device) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - u8 nsect, lbal; - - ap->ops->dev_select(ap, device); - - outb(0x55, ioaddr->nsect_addr); - outb(0xaa, ioaddr->lbal_addr); - - outb(0xaa, ioaddr->nsect_addr); - outb(0x55, ioaddr->lbal_addr); - - outb(0x55, ioaddr->nsect_addr); - outb(0xaa, ioaddr->lbal_addr); - - nsect = inb(ioaddr->nsect_addr); - lbal = inb(ioaddr->lbal_addr); - - if ((nsect == 0x55) && (lbal == 0xaa)) - return 1; /* we found a device */ - - return 0; /* nothing found */ -} - -/** - * ata_mmio_devchk - PATA device presence detection - * @ap: ATA channel to examine - * @device: Device to examine (starting at zero) - * - * This technique was originally described in - * Hale Landis's ATADRVR (www.ata-atapi.com), and - * later found its way into the ATA/ATAPI spec. - * - * Write a pattern to the ATA shadow registers, - * and if a device is present, it will respond by - * correctly storing and echoing back the - * ATA shadow register contents. - * - * LOCKING: - * caller. - */ - -static unsigned int ata_mmio_devchk(struct ata_port *ap, - unsigned int device) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - u8 nsect, lbal; - - ap->ops->dev_select(ap, device); - - writeb(0x55, (void __iomem *) ioaddr->nsect_addr); - writeb(0xaa, (void __iomem *) ioaddr->lbal_addr); - - writeb(0xaa, (void __iomem *) ioaddr->nsect_addr); - writeb(0x55, (void __iomem *) ioaddr->lbal_addr); - - writeb(0x55, (void __iomem *) ioaddr->nsect_addr); - writeb(0xaa, (void __iomem *) ioaddr->lbal_addr); - - nsect = readb((void __iomem *) ioaddr->nsect_addr); - lbal = readb((void __iomem *) ioaddr->lbal_addr); - - if ((nsect == 0x55) && (lbal == 0xaa)) - return 1; /* we found a device */ - - return 0; /* nothing found */ -} - -/** - * ata_devchk - PATA device presence detection - * @ap: ATA channel to examine - * @device: Device to examine (starting at zero) - * - * Dispatch ATA device presence detection, depending - * on whether we are using PIO or MMIO to talk to the - * ATA shadow registers. - * - * LOCKING: - * caller. - */ - -static unsigned int ata_devchk(struct ata_port *ap, - unsigned int device) -{ - if (ap->flags & ATA_FLAG_MMIO) - return ata_mmio_devchk(ap, device); - return ata_pio_devchk(ap, device); -} - -/** - * ata_dev_classify - determine device type based on ATA-spec signature - * @tf: ATA taskfile register set for device to be identified - * - * Determine from taskfile register contents whether a device is - * ATA or ATAPI, as per "Signature and persistence" section - * of ATA/PI spec (volume 1, sect 5.14). - * - * LOCKING: - * None. - * - * RETURNS: - * Device type, %ATA_DEV_ATA, %ATA_DEV_ATAPI, or %ATA_DEV_UNKNOWN - * the event of failure. - */ - -unsigned int ata_dev_classify(const struct ata_taskfile *tf) -{ - /* Apple's open source Darwin code hints that some devices only - * put a proper signature into the LBA mid/high registers, - * So, we only check those. It's sufficient for uniqueness. - */ - - if (((tf->lbam == 0) && (tf->lbah == 0)) || - ((tf->lbam == 0x3c) && (tf->lbah == 0xc3))) { - DPRINTK("found ATA device by sig\n"); - return ATA_DEV_ATA; - } - - if (((tf->lbam == 0x14) && (tf->lbah == 0xeb)) || - ((tf->lbam == 0x69) && (tf->lbah == 0x96))) { - DPRINTK("found ATAPI device by sig\n"); - return ATA_DEV_ATAPI; - } - - DPRINTK("unknown device\n"); - return ATA_DEV_UNKNOWN; -} - -/** - * ata_dev_try_classify - Parse returned ATA device signature - * @ap: ATA channel to examine - * @device: Device to examine (starting at zero) - * @r_err: Value of error register on completion - * - * After an event -- SRST, E.D.D., or SATA COMRESET -- occurs, - * an ATA/ATAPI-defined set of values is placed in the ATA - * shadow registers, indicating the results of device detection - * and diagnostics. - * - * Select the ATA device, and read the values from the ATA shadow - * registers. Then parse according to the Error register value, - * and the spec-defined values examined by ata_dev_classify(). - * - * LOCKING: - * caller. - * - * RETURNS: - * Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE. - */ - -static unsigned int -ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err) -{ - struct ata_taskfile tf; - unsigned int class; - u8 err; - - ap->ops->dev_select(ap, device); - - memset(&tf, 0, sizeof(tf)); - - ap->ops->tf_read(ap, &tf); - err = tf.feature; - if (r_err) - *r_err = err; - - /* see if device passed diags */ - if (err == 1) - /* do nothing */ ; - else if ((device == 0) && (err == 0x81)) - /* do nothing */ ; - else - return ATA_DEV_NONE; - - /* determine if device is ATA or ATAPI */ - class = ata_dev_classify(&tf); - - if (class == ATA_DEV_UNKNOWN) - return ATA_DEV_NONE; - if ((class == ATA_DEV_ATA) && (ata_chk_status(ap) == 0)) - return ATA_DEV_NONE; - return class; -} - -/** - * ata_id_string - Convert IDENTIFY DEVICE page into string - * @id: IDENTIFY DEVICE results we will examine - * @s: string into which data is output - * @ofs: offset into identify device page - * @len: length of string to return. must be an even number. - * - * The strings in the IDENTIFY DEVICE page are broken up into - * 16-bit chunks. Run through the string, and output each - * 8-bit chunk linearly, regardless of platform. - * - * LOCKING: - * caller. - */ - -void ata_id_string(const u16 *id, unsigned char *s, - unsigned int ofs, unsigned int len) -{ - unsigned int c; - - while (len > 0) { - c = id[ofs] >> 8; - *s = c; - s++; - - c = id[ofs] & 0xff; - *s = c; - s++; - - ofs++; - len -= 2; - } -} - -/** - * ata_id_c_string - Convert IDENTIFY DEVICE page into C string - * @id: IDENTIFY DEVICE results we will examine - * @s: string into which data is output - * @ofs: offset into identify device page - * @len: length of string to return. must be an odd number. - * - * This function is identical to ata_id_string except that it - * trims trailing spaces and terminates the resulting string with - * null. @len must be actual maximum length (even number) + 1. - * - * LOCKING: - * caller. - */ -void ata_id_c_string(const u16 *id, unsigned char *s, - unsigned int ofs, unsigned int len) -{ - unsigned char *p; - - WARN_ON(!(len & 1)); - - ata_id_string(id, s, ofs, len - 1); - - p = s + strnlen(s, len - 1); - while (p > s && p[-1] == ' ') - p--; - *p = '\0'; -} - -static u64 ata_id_n_sectors(const u16 *id) -{ - if (ata_id_has_lba(id)) { - if (ata_id_has_lba48(id)) - return ata_id_u64(id, 100); - else - return ata_id_u32(id, 60); - } else { - if (ata_id_current_chs_valid(id)) - return ata_id_u32(id, 57); - else - return id[1] * id[3] * id[6]; - } -} - -/** - * ata_noop_dev_select - Select device 0/1 on ATA bus - * @ap: ATA channel to manipulate - * @device: ATA device (numbered from zero) to select - * - * This function performs no actual function. - * - * May be used as the dev_select() entry in ata_port_operations. - * - * LOCKING: - * caller. - */ -void ata_noop_dev_select (struct ata_port *ap, unsigned int device) -{ -} - - -/** - * ata_std_dev_select - Select device 0/1 on ATA bus - * @ap: ATA channel to manipulate - * @device: ATA device (numbered from zero) to select - * - * Use the method defined in the ATA specification to - * make either device 0, or device 1, active on the - * ATA channel. Works with both PIO and MMIO. - * - * May be used as the dev_select() entry in ata_port_operations. - * - * LOCKING: - * caller. - */ - -void ata_std_dev_select (struct ata_port *ap, unsigned int device) -{ - u8 tmp; - - if (device == 0) - tmp = ATA_DEVICE_OBS; - else - tmp = ATA_DEVICE_OBS | ATA_DEV1; - - if (ap->flags & ATA_FLAG_MMIO) { - writeb(tmp, (void __iomem *) ap->ioaddr.device_addr); - } else { - outb(tmp, ap->ioaddr.device_addr); - } - ata_pause(ap); /* needed; also flushes, for mmio */ -} - -/** - * ata_dev_select - Select device 0/1 on ATA bus - * @ap: ATA channel to manipulate - * @device: ATA device (numbered from zero) to select - * @wait: non-zero to wait for Status register BSY bit to clear - * @can_sleep: non-zero if context allows sleeping - * - * Use the method defined in the ATA specification to - * make either device 0, or device 1, active on the - * ATA channel. - * - * This is a high-level version of ata_std_dev_select(), - * which additionally provides the services of inserting - * the proper pauses and status polling, where needed. - * - * LOCKING: - * caller. - */ - -void ata_dev_select(struct ata_port *ap, unsigned int device, - unsigned int wait, unsigned int can_sleep) -{ - if (ata_msg_probe(ap)) { - ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, ata%u: " - "device %u, wait %u\n", - ap->id, device, wait); - } - - if (wait) - ata_wait_idle(ap); - - ap->ops->dev_select(ap, device); - - if (wait) { - if (can_sleep && ap->device[device].class == ATA_DEV_ATAPI) - msleep(150); - ata_wait_idle(ap); - } -} - -/** - * ata_dump_id - IDENTIFY DEVICE info debugging output - * @id: IDENTIFY DEVICE page to dump - * - * Dump selected 16-bit words from the given IDENTIFY DEVICE - * page. - * - * LOCKING: - * caller. - */ - -static inline void ata_dump_id(const u16 *id) -{ - DPRINTK("49==0x%04x " - "53==0x%04x " - "63==0x%04x " - "64==0x%04x " - "75==0x%04x \n", - id[49], - id[53], - id[63], - id[64], - id[75]); - DPRINTK("80==0x%04x " - "81==0x%04x " - "82==0x%04x " - "83==0x%04x " - "84==0x%04x \n", - id[80], - id[81], - id[82], - id[83], - id[84]); - DPRINTK("88==0x%04x " - "93==0x%04x\n", - id[88], - id[93]); -} - -/** - * ata_id_xfermask - Compute xfermask from the given IDENTIFY data - * @id: IDENTIFY data to compute xfer mask from - * - * Compute the xfermask for this device. This is not as trivial - * as it seems if we must consider early devices correctly. - * - * FIXME: pre IDE drive timing (do we care ?). - * - * LOCKING: - * None. - * - * RETURNS: - * Computed xfermask - */ -static unsigned int ata_id_xfermask(const u16 *id) -{ - unsigned int pio_mask, mwdma_mask, udma_mask; - - /* Usual case. Word 53 indicates word 64 is valid */ - if (id[ATA_ID_FIELD_VALID] & (1 << 1)) { - pio_mask = id[ATA_ID_PIO_MODES] & 0x03; - pio_mask <<= 3; - pio_mask |= 0x7; - } else { - /* If word 64 isn't valid then Word 51 high byte holds - * the PIO timing number for the maximum. Turn it into - * a mask. - */ - pio_mask = (2 << (id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ; - - /* But wait.. there's more. Design your standards by - * committee and you too can get a free iordy field to - * process. However its the speeds not the modes that - * are supported... Note drivers using the timing API - * will get this right anyway - */ - } - - mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07; - - udma_mask = 0; - if (id[ATA_ID_FIELD_VALID] & (1 << 2)) - udma_mask = id[ATA_ID_UDMA_MODES] & 0xff; - - return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask); -} - -/** - * ata_port_queue_task - Queue port_task - * @ap: The ata_port to queue port_task for - * @fn: workqueue function to be scheduled - * @data: data value to pass to workqueue function - * @delay: delay time for workqueue function - * - * Schedule @fn(@data) for execution after @delay jiffies using - * port_task. There is one port_task per port and it's the - * user(low level driver)'s responsibility to make sure that only - * one task is active at any given time. - * - * libata core layer takes care of synchronization between - * port_task and EH. ata_port_queue_task() may be ignored for EH - * synchronization. - * - * LOCKING: - * Inherited from caller. - */ -void ata_port_queue_task(struct ata_port *ap, void (*fn)(void *), void *data, - unsigned long delay) -{ - int rc; - - if (ap->flags & ATA_FLAG_FLUSH_PORT_TASK) - return; - - PREPARE_WORK(&ap->port_task, fn, data); - - if (!delay) - rc = queue_work(ata_wq, &ap->port_task); - else - rc = queue_delayed_work(ata_wq, &ap->port_task, delay); - - /* rc == 0 means that another user is using port task */ - WARN_ON(rc == 0); -} - -/** - * ata_port_flush_task - Flush port_task - * @ap: The ata_port to flush port_task for - * - * After this function completes, port_task is guranteed not to - * be running or scheduled. - * - * LOCKING: - * Kernel thread context (may sleep) - */ -void ata_port_flush_task(struct ata_port *ap) -{ - unsigned long flags; - - DPRINTK("ENTER\n"); - - spin_lock_irqsave(ap->lock, flags); - ap->flags |= ATA_FLAG_FLUSH_PORT_TASK; - spin_unlock_irqrestore(ap->lock, flags); - - DPRINTK("flush #1\n"); - flush_workqueue(ata_wq); - - /* - * At this point, if a task is running, it's guaranteed to see - * the FLUSH flag; thus, it will never queue pio tasks again. - * Cancel and flush. - */ - if (!cancel_delayed_work(&ap->port_task)) { - if (ata_msg_ctl(ap)) - ata_port_printk(ap, KERN_DEBUG, "%s: flush #2\n", __FUNCTION__); - flush_workqueue(ata_wq); - } - - spin_lock_irqsave(ap->lock, flags); - ap->flags &= ~ATA_FLAG_FLUSH_PORT_TASK; - spin_unlock_irqrestore(ap->lock, flags); - - if (ata_msg_ctl(ap)) - ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __FUNCTION__); -} - -void ata_qc_complete_internal(struct ata_queued_cmd *qc) -{ - struct completion *waiting = qc->private_data; - - complete(waiting); -} - -/** - * ata_exec_internal - execute libata internal command - * @dev: Device to which the command is sent - * @tf: Taskfile registers for the command and the result - * @cdb: CDB for packet command - * @dma_dir: Data tranfer direction of the command - * @buf: Data buffer of the command - * @buflen: Length of data buffer - * - * Executes libata internal command with timeout. @tf contains - * command on entry and result on return. Timeout and error - * conditions are reported via return value. No recovery action - * is taken after a command times out. It's caller's duty to - * clean up after timeout. - * - * LOCKING: - * None. Should be called with kernel context, might sleep. - * - * RETURNS: - * Zero on success, AC_ERR_* mask on failure - */ -unsigned ata_exec_internal(struct ata_device *dev, - struct ata_taskfile *tf, const u8 *cdb, - int dma_dir, void *buf, unsigned int buflen) -{ - struct ata_port *ap = dev->ap; - u8 command = tf->command; - struct ata_queued_cmd *qc; - unsigned int tag, preempted_tag; - u32 preempted_sactive, preempted_qc_active; - DECLARE_COMPLETION(wait); - unsigned long flags; - unsigned int err_mask; - int rc; - - spin_lock_irqsave(ap->lock, flags); - - /* no internal command while frozen */ - if (ap->flags & ATA_FLAG_FROZEN) { - spin_unlock_irqrestore(ap->lock, flags); - return AC_ERR_SYSTEM; - } - - /* initialize internal qc */ - - /* XXX: Tag 0 is used for drivers with legacy EH as some - * drivers choke if any other tag is given. This breaks - * ata_tag_internal() test for those drivers. Don't use new - * EH stuff without converting to it. - */ - if (ap->ops->error_handler) - tag = ATA_TAG_INTERNAL; - else - tag = 0; - - if (test_and_set_bit(tag, &ap->qc_allocated)) - BUG(); - qc = __ata_qc_from_tag(ap, tag); - - qc->tag = tag; - qc->scsicmd = NULL; - qc->ap = ap; - qc->dev = dev; - ata_qc_reinit(qc); - - preempted_tag = ap->active_tag; - preempted_sactive = ap->sactive; - preempted_qc_active = ap->qc_active; - ap->active_tag = ATA_TAG_POISON; - ap->sactive = 0; - ap->qc_active = 0; - - /* prepare & issue qc */ - qc->tf = *tf; - if (cdb) - memcpy(qc->cdb, cdb, ATAPI_CDB_LEN); - qc->flags |= ATA_QCFLAG_RESULT_TF; - qc->dma_dir = dma_dir; - if (dma_dir != DMA_NONE) { - ata_sg_init_one(qc, buf, buflen); - qc->nsect = buflen / ATA_SECT_SIZE; - } - - qc->private_data = &wait; - qc->complete_fn = ata_qc_complete_internal; - - ata_qc_issue(qc); - - spin_unlock_irqrestore(ap->lock, flags); - - rc = wait_for_completion_timeout(&wait, ATA_TMOUT_INTERNAL); - - ata_port_flush_task(ap); - - if (!rc) { - spin_lock_irqsave(ap->lock, flags); - - /* We're racing with irq here. If we lose, the - * following test prevents us from completing the qc - * twice. If we win, the port is frozen and will be - * cleaned up by ->post_internal_cmd(). - */ - if (qc->flags & ATA_QCFLAG_ACTIVE) { - qc->err_mask |= AC_ERR_TIMEOUT; - - if (ap->ops->error_handler) - ata_port_freeze(ap); - else - ata_qc_complete(qc); - - if (ata_msg_warn(ap)) - ata_dev_printk(dev, KERN_WARNING, - "qc timeout (cmd 0x%x)\n", command); - } - - spin_unlock_irqrestore(ap->lock, flags); - } - - /* do post_internal_cmd */ - if (ap->ops->post_internal_cmd) - ap->ops->post_internal_cmd(qc); - - if (qc->flags & ATA_QCFLAG_FAILED && !qc->err_mask) { - if (ata_msg_warn(ap)) - ata_dev_printk(dev, KERN_WARNING, - "zero err_mask for failed " - "internal command, assuming AC_ERR_OTHER\n"); - qc->err_mask |= AC_ERR_OTHER; - } - - /* finish up */ - spin_lock_irqsave(ap->lock, flags); - - *tf = qc->result_tf; - err_mask = qc->err_mask; - - ata_qc_free(qc); - ap->active_tag = preempted_tag; - ap->sactive = preempted_sactive; - ap->qc_active = preempted_qc_active; - - /* XXX - Some LLDDs (sata_mv) disable port on command failure. - * Until those drivers are fixed, we detect the condition - * here, fail the command with AC_ERR_SYSTEM and reenable the - * port. - * - * Note that this doesn't change any behavior as internal - * command failure results in disabling the device in the - * higher layer for LLDDs without new reset/EH callbacks. - * - * Kill the following code as soon as those drivers are fixed. - */ - if (ap->flags & ATA_FLAG_DISABLED) { - err_mask |= AC_ERR_SYSTEM; - ata_port_probe(ap); - } - - spin_unlock_irqrestore(ap->lock, flags); - - return err_mask; -} - -/** - * ata_pio_need_iordy - check if iordy needed - * @adev: ATA device - * - * Check if the current speed of the device requires IORDY. Used - * by various controllers for chip configuration. - */ - -unsigned int ata_pio_need_iordy(const struct ata_device *adev) -{ - int pio; - int speed = adev->pio_mode - XFER_PIO_0; - - if (speed < 2) - return 0; - if (speed > 2) - return 1; - - /* If we have no drive specific rule, then PIO 2 is non IORDY */ - - if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE */ - pio = adev->id[ATA_ID_EIDE_PIO]; - /* Is the speed faster than the drive allows non IORDY ? */ - if (pio) { - /* This is cycle times not frequency - watch the logic! */ - if (pio > 240) /* PIO2 is 240nS per cycle */ - return 1; - return 0; - } - } - return 0; -} - -/** - * ata_dev_read_id - Read ID data from the specified device - * @dev: target device - * @p_class: pointer to class of the target device (may be changed) - * @post_reset: is this read ID post-reset? - * @id: buffer to read IDENTIFY data into - * - * Read ID data from the specified device. ATA_CMD_ID_ATA is - * performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI - * devices. This function also issues ATA_CMD_INIT_DEV_PARAMS - * for pre-ATA4 drives. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, - int post_reset, u16 *id) -{ - struct ata_port *ap = dev->ap; - unsigned int class = *p_class; - struct ata_taskfile tf; - unsigned int err_mask = 0; - const char *reason; - int rc; - - if (ata_msg_ctl(ap)) - ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n", - __FUNCTION__, ap->id, dev->devno); - - ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */ - - retry: - ata_tf_init(dev, &tf); - - switch (class) { - case ATA_DEV_ATA: - tf.command = ATA_CMD_ID_ATA; - break; - case ATA_DEV_ATAPI: - tf.command = ATA_CMD_ID_ATAPI; - break; - default: - rc = -ENODEV; - reason = "unsupported class"; - goto err_out; - } - - tf.protocol = ATA_PROT_PIO; - - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, - id, sizeof(id[0]) * ATA_ID_WORDS); - if (err_mask) { - rc = -EIO; - reason = "I/O error"; - goto err_out; - } - - swap_buf_le16(id, ATA_ID_WORDS); - - /* sanity check */ - if ((class == ATA_DEV_ATA) != (ata_id_is_ata(id) | ata_id_is_cfa(id))) { - rc = -EINVAL; - reason = "device reports illegal type"; - goto err_out; - } - - if (post_reset && class == ATA_DEV_ATA) { - /* - * The exact sequence expected by certain pre-ATA4 drives is: - * SRST RESET - * IDENTIFY - * INITIALIZE DEVICE PARAMETERS - * anything else.. - * Some drives were very specific about that exact sequence. - */ - if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) { - err_mask = ata_dev_init_params(dev, id[3], id[6]); - if (err_mask) { - rc = -EIO; - reason = "INIT_DEV_PARAMS failed"; - goto err_out; - } - - /* current CHS translation info (id[53-58]) might be - * changed. reread the identify device info. - */ - post_reset = 0; - goto retry; - } - } - - *p_class = class; - - return 0; - - err_out: - if (ata_msg_warn(ap)) - ata_dev_printk(dev, KERN_WARNING, "failed to IDENTIFY " - "(%s, err_mask=0x%x)\n", reason, err_mask); - return rc; -} - -static inline u8 ata_dev_knobble(struct ata_device *dev) -{ - return ((dev->ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); -} - -static void ata_dev_config_ncq(struct ata_device *dev, - char *desc, size_t desc_sz) -{ - struct ata_port *ap = dev->ap; - int hdepth = 0, ddepth = ata_id_queue_depth(dev->id); - - if (!ata_id_has_ncq(dev->id)) { - desc[0] = '\0'; - return; - } - - if (ap->flags & ATA_FLAG_NCQ) { - hdepth = min(ap->host->can_queue, ATA_MAX_QUEUE - 1); - dev->flags |= ATA_DFLAG_NCQ; - } - - if (hdepth >= ddepth) - snprintf(desc, desc_sz, "NCQ (depth %d)", ddepth); - else - snprintf(desc, desc_sz, "NCQ (depth %d/%d)", hdepth, ddepth); -} - -/** - * ata_dev_configure - Configure the specified ATA/ATAPI device - * @dev: Target device to configure - * @print_info: Enable device info printout - * - * Configure @dev according to @dev->id. Generic and low-level - * driver specific fixups are also applied. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno otherwise - */ -int ata_dev_configure(struct ata_device *dev, int print_info) -{ - struct ata_port *ap = dev->ap; - const u16 *id = dev->id; - unsigned int xfer_mask; - int i, rc; - - if (!ata_dev_enabled(dev) && ata_msg_info(ap)) { - ata_dev_printk(dev, KERN_INFO, "%s: ENTER/EXIT (host %u, dev %u) -- nodev\n", - __FUNCTION__, ap->id, dev->devno); - return 0; - } - - if (ata_msg_probe(ap)) - ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n", - __FUNCTION__, ap->id, dev->devno); - - /* print device capabilities */ - if (ata_msg_probe(ap)) - ata_dev_printk(dev, KERN_DEBUG, "%s: cfg 49:%04x 82:%04x 83:%04x " - "84:%04x 85:%04x 86:%04x 87:%04x 88:%04x\n", - __FUNCTION__, - id[49], id[82], id[83], id[84], - id[85], id[86], id[87], id[88]); - - /* initialize to-be-configured parameters */ - dev->flags &= ~ATA_DFLAG_CFG_MASK; - dev->max_sectors = 0; - dev->cdb_len = 0; - dev->n_sectors = 0; - dev->cylinders = 0; - dev->heads = 0; - dev->sectors = 0; - - /* - * common ATA, ATAPI feature tests - */ - - /* find max transfer mode; for printk only */ - xfer_mask = ata_id_xfermask(id); - - if (ata_msg_probe(ap)) - ata_dump_id(id); - - /* ATA-specific feature tests */ - if (dev->class == ATA_DEV_ATA) { - dev->n_sectors = ata_id_n_sectors(id); - - if (ata_id_has_lba(id)) { - const char *lba_desc; - char ncq_desc[20]; - - lba_desc = "LBA"; - dev->flags |= ATA_DFLAG_LBA; - if (ata_id_has_lba48(id)) { - dev->flags |= ATA_DFLAG_LBA48; - lba_desc = "LBA48"; - } - - /* config NCQ */ - ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc)); - - /* print device info to dmesg */ - if (ata_msg_info(ap)) - ata_dev_printk(dev, KERN_INFO, "ATA-%d, " - "max %s, %Lu sectors: %s %s\n", - ata_id_major_version(id), - ata_mode_string(xfer_mask), - (unsigned long long)dev->n_sectors, - lba_desc, ncq_desc); - } else { - /* CHS */ - - /* Default translation */ - dev->cylinders = id[1]; - dev->heads = id[3]; - dev->sectors = id[6]; - - if (ata_id_current_chs_valid(id)) { - /* Current CHS translation is valid. */ - dev->cylinders = id[54]; - dev->heads = id[55]; - dev->sectors = id[56]; - } - - /* print device info to dmesg */ - if (ata_msg_info(ap)) - ata_dev_printk(dev, KERN_INFO, "ATA-%d, " - "max %s, %Lu sectors: CHS %u/%u/%u\n", - ata_id_major_version(id), - ata_mode_string(xfer_mask), - (unsigned long long)dev->n_sectors, - dev->cylinders, dev->heads, dev->sectors); - } - - if (dev->id[59] & 0x100) { - dev->multi_count = dev->id[59] & 0xff; - if (ata_msg_info(ap)) - ata_dev_printk(dev, KERN_INFO, "ata%u: dev %u multi count %u\n", - ap->id, dev->devno, dev->multi_count); - } - - dev->cdb_len = 16; - } - - /* ATAPI-specific feature tests */ - else if (dev->class == ATA_DEV_ATAPI) { - char *cdb_intr_string = ""; - - rc = atapi_cdb_len(id); - if ((rc < 12) || (rc > ATAPI_CDB_LEN)) { - if (ata_msg_warn(ap)) - ata_dev_printk(dev, KERN_WARNING, - "unsupported CDB len\n"); - rc = -EINVAL; - goto err_out_nosup; - } - dev->cdb_len = (unsigned int) rc; - - if (ata_id_cdb_intr(dev->id)) { - dev->flags |= ATA_DFLAG_CDB_INTR; - cdb_intr_string = ", CDB intr"; - } - - /* print device info to dmesg */ - if (ata_msg_info(ap)) - ata_dev_printk(dev, KERN_INFO, "ATAPI, max %s%s\n", - ata_mode_string(xfer_mask), - cdb_intr_string); - } - - ap->host->max_cmd_len = 0; - for (i = 0; i < ATA_MAX_DEVICES; i++) - ap->host->max_cmd_len = max_t(unsigned int, - ap->host->max_cmd_len, - ap->device[i].cdb_len); - - /* limit bridge transfers to udma5, 200 sectors */ - if (ata_dev_knobble(dev)) { - if (ata_msg_info(ap)) - ata_dev_printk(dev, KERN_INFO, - "applying bridge limits\n"); - dev->udma_mask &= ATA_UDMA5; - dev->max_sectors = ATA_MAX_SECTORS; - } - - if (ap->ops->dev_config) - ap->ops->dev_config(ap, dev); - - if (ata_msg_probe(ap)) - ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n", - __FUNCTION__, ata_chk_status(ap)); - return 0; - -err_out_nosup: - if (ata_msg_probe(ap)) - ata_dev_printk(dev, KERN_DEBUG, - "%s: EXIT, err\n", __FUNCTION__); - return rc; -} - -/** - * ata_bus_probe - Reset and probe ATA bus - * @ap: Bus to probe - * - * Master ATA bus probing function. Initiates a hardware-dependent - * bus reset, then attempts to identify any devices found on - * the bus. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * Zero on success, negative errno otherwise. - */ - -static int ata_bus_probe(struct ata_port *ap) -{ - unsigned int classes[ATA_MAX_DEVICES]; - int tries[ATA_MAX_DEVICES]; - int i, rc, down_xfermask; - struct ata_device *dev; - - ata_port_probe(ap); - - for (i = 0; i < ATA_MAX_DEVICES; i++) - tries[i] = ATA_PROBE_MAX_TRIES; - - retry: - down_xfermask = 0; - - /* reset and determine device classes */ - ap->ops->phy_reset(ap); - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - - if (!(ap->flags & ATA_FLAG_DISABLED) && - dev->class != ATA_DEV_UNKNOWN) - classes[dev->devno] = dev->class; - else - classes[dev->devno] = ATA_DEV_NONE; - - dev->class = ATA_DEV_UNKNOWN; - } - - ata_port_probe(ap); - - /* after the reset the device state is PIO 0 and the controller - state is undefined. Record the mode */ - - for (i = 0; i < ATA_MAX_DEVICES; i++) - ap->device[i].pio_mode = XFER_PIO_0; - - /* read IDENTIFY page and configure devices */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - - if (tries[i]) - dev->class = classes[i]; - - if (!ata_dev_enabled(dev)) - continue; - - rc = ata_dev_read_id(dev, &dev->class, 1, dev->id); - if (rc) - goto fail; - - rc = ata_dev_configure(dev, 1); - if (rc) - goto fail; - } - - /* configure transfer mode */ - rc = ata_set_mode(ap, &dev); - if (rc) { - down_xfermask = 1; - goto fail; - } - - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (ata_dev_enabled(&ap->device[i])) - return 0; - - /* no device present, disable port */ - ata_port_disable(ap); - ap->ops->port_disable(ap); - return -ENODEV; - - fail: - switch (rc) { - case -EINVAL: - case -ENODEV: - tries[dev->devno] = 0; - break; - case -EIO: - sata_down_spd_limit(ap); - /* fall through */ - default: - tries[dev->devno]--; - if (down_xfermask && - ata_down_xfermask_limit(dev, tries[dev->devno] == 1)) - tries[dev->devno] = 0; - } - - if (!tries[dev->devno]) { - ata_down_xfermask_limit(dev, 1); - ata_dev_disable(dev); - } - - goto retry; -} - -/** - * ata_port_probe - Mark port as enabled - * @ap: Port for which we indicate enablement - * - * Modify @ap data structure such that the system - * thinks that the entire port is enabled. - * - * LOCKING: host_set lock, or some other form of - * serialization. - */ - -void ata_port_probe(struct ata_port *ap) -{ - ap->flags &= ~ATA_FLAG_DISABLED; -} - -/** - * sata_print_link_status - Print SATA link status - * @ap: SATA port to printk link status about - * - * This function prints link speed and status of a SATA link. - * - * LOCKING: - * None. - */ -static void sata_print_link_status(struct ata_port *ap) -{ - u32 sstatus, scontrol, tmp; - - if (sata_scr_read(ap, SCR_STATUS, &sstatus)) - return; - sata_scr_read(ap, SCR_CONTROL, &scontrol); - - if (ata_port_online(ap)) { - tmp = (sstatus >> 4) & 0xf; - ata_port_printk(ap, KERN_INFO, - "SATA link up %s (SStatus %X SControl %X)\n", - sata_spd_string(tmp), sstatus, scontrol); - } else { - ata_port_printk(ap, KERN_INFO, - "SATA link down (SStatus %X SControl %X)\n", - sstatus, scontrol); - } -} - -/** - * __sata_phy_reset - Wake/reset a low-level SATA PHY - * @ap: SATA port associated with target SATA PHY. - * - * This function issues commands to standard SATA Sxxx - * PHY registers, to wake up the phy (and device), and - * clear any reset condition. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - */ -void __sata_phy_reset(struct ata_port *ap) -{ - u32 sstatus; - unsigned long timeout = jiffies + (HZ * 5); - - if (ap->flags & ATA_FLAG_SATA_RESET) { - /* issue phy wake/reset */ - sata_scr_write_flush(ap, SCR_CONTROL, 0x301); - /* Couldn't find anything in SATA I/II specs, but - * AHCI-1.1 10.4.2 says at least 1 ms. */ - mdelay(1); - } - /* phy wake/clear reset */ - sata_scr_write_flush(ap, SCR_CONTROL, 0x300); - - /* wait for phy to become ready, if necessary */ - do { - msleep(200); - sata_scr_read(ap, SCR_STATUS, &sstatus); - if ((sstatus & 0xf) != 1) - break; - } while (time_before(jiffies, timeout)); - - /* print link status */ - sata_print_link_status(ap); - - /* TODO: phy layer with polling, timeouts, etc. */ - if (!ata_port_offline(ap)) - ata_port_probe(ap); - else - ata_port_disable(ap); - - if (ap->flags & ATA_FLAG_DISABLED) - return; - - if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { - ata_port_disable(ap); - return; - } - - ap->cbl = ATA_CBL_SATA; -} - -/** - * sata_phy_reset - Reset SATA bus. - * @ap: SATA port associated with target SATA PHY. - * - * This function resets the SATA bus, and then probes - * the bus for devices. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - */ -void sata_phy_reset(struct ata_port *ap) -{ - __sata_phy_reset(ap); - if (ap->flags & ATA_FLAG_DISABLED) - return; - ata_bus_reset(ap); -} - -/** - * ata_dev_pair - return other device on cable - * @adev: device - * - * Obtain the other device on the same cable, or if none is - * present NULL is returned - */ - -struct ata_device *ata_dev_pair(struct ata_device *adev) -{ - struct ata_port *ap = adev->ap; - struct ata_device *pair = &ap->device[1 - adev->devno]; - if (!ata_dev_enabled(pair)) - return NULL; - return pair; -} - -/** - * ata_port_disable - Disable port. - * @ap: Port to be disabled. - * - * Modify @ap data structure such that the system - * thinks that the entire port is disabled, and should - * never attempt to probe or communicate with devices - * on this port. - * - * LOCKING: host_set lock, or some other form of - * serialization. - */ - -void ata_port_disable(struct ata_port *ap) -{ - ap->device[0].class = ATA_DEV_NONE; - ap->device[1].class = ATA_DEV_NONE; - ap->flags |= ATA_FLAG_DISABLED; -} - -/** - * sata_down_spd_limit - adjust SATA spd limit downward - * @ap: Port to adjust SATA spd limit for - * - * Adjust SATA spd limit of @ap downward. Note that this - * function only adjusts the limit. The change must be applied - * using sata_set_spd(). - * - * LOCKING: - * Inherited from caller. - * - * RETURNS: - * 0 on success, negative errno on failure - */ -int sata_down_spd_limit(struct ata_port *ap) -{ - u32 sstatus, spd, mask; - int rc, highbit; - - rc = sata_scr_read(ap, SCR_STATUS, &sstatus); - if (rc) - return rc; - - mask = ap->sata_spd_limit; - if (mask <= 1) - return -EINVAL; - highbit = fls(mask) - 1; - mask &= ~(1 << highbit); - - spd = (sstatus >> 4) & 0xf; - if (spd <= 1) - return -EINVAL; - spd--; - mask &= (1 << spd) - 1; - if (!mask) - return -EINVAL; - - ap->sata_spd_limit = mask; - - ata_port_printk(ap, KERN_WARNING, "limiting SATA link speed to %s\n", - sata_spd_string(fls(mask))); - - return 0; -} - -static int __sata_set_spd_needed(struct ata_port *ap, u32 *scontrol) -{ - u32 spd, limit; - - if (ap->sata_spd_limit == UINT_MAX) - limit = 0; - else - limit = fls(ap->sata_spd_limit); - - spd = (*scontrol >> 4) & 0xf; - *scontrol = (*scontrol & ~0xf0) | ((limit & 0xf) << 4); - - return spd != limit; -} - -/** - * sata_set_spd_needed - is SATA spd configuration needed - * @ap: Port in question - * - * Test whether the spd limit in SControl matches - * @ap->sata_spd_limit. This function is used to determine - * whether hardreset is necessary to apply SATA spd - * configuration. - * - * LOCKING: - * Inherited from caller. - * - * RETURNS: - * 1 if SATA spd configuration is needed, 0 otherwise. - */ -int sata_set_spd_needed(struct ata_port *ap) -{ - u32 scontrol; - - if (sata_scr_read(ap, SCR_CONTROL, &scontrol)) - return 0; - - return __sata_set_spd_needed(ap, &scontrol); -} - -/** - * sata_set_spd - set SATA spd according to spd limit - * @ap: Port to set SATA spd for - * - * Set SATA spd of @ap according to sata_spd_limit. - * - * LOCKING: - * Inherited from caller. - * - * RETURNS: - * 0 if spd doesn't need to be changed, 1 if spd has been - * changed. Negative errno if SCR registers are inaccessible. - */ -int sata_set_spd(struct ata_port *ap) -{ - u32 scontrol; - int rc; - - if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) - return rc; - - if (!__sata_set_spd_needed(ap, &scontrol)) - return 0; - - if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) - return rc; - - return 1; -} - -/* - * This mode timing computation functionality is ported over from - * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik - */ -/* - * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). - * These were taken from ATA/ATAPI-6 standard, rev 0a, except - * for PIO 5, which is a nonstandard extension and UDMA6, which - * is currently supported only by Maxtor drives. - */ - -static const struct ata_timing ata_timing[] = { - - { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, - { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, - { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, - { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, - - { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, - { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, - { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, - -/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */ - - { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, - { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, - { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, - - { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, - { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, - { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, - -/* { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, */ - { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, - { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, - - { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, - { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, - { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, - -/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */ - - { 0xFF } -}; - -#define ENOUGH(v,unit) (((v)-1)/(unit)+1) -#define EZ(v,unit) ((v)?ENOUGH(v,unit):0) - -static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT) -{ - q->setup = EZ(t->setup * 1000, T); - q->act8b = EZ(t->act8b * 1000, T); - q->rec8b = EZ(t->rec8b * 1000, T); - q->cyc8b = EZ(t->cyc8b * 1000, T); - q->active = EZ(t->active * 1000, T); - q->recover = EZ(t->recover * 1000, T); - q->cycle = EZ(t->cycle * 1000, T); - q->udma = EZ(t->udma * 1000, UT); -} - -void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b, - struct ata_timing *m, unsigned int what) -{ - if (what & ATA_TIMING_SETUP ) m->setup = max(a->setup, b->setup); - if (what & ATA_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b); - if (what & ATA_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b); - if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b); - if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active); - if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover); - if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle); - if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma); -} - -static const struct ata_timing* ata_timing_find_mode(unsigned short speed) -{ - const struct ata_timing *t; - - for (t = ata_timing; t->mode != speed; t++) - if (t->mode == 0xFF) - return NULL; - return t; -} - -int ata_timing_compute(struct ata_device *adev, unsigned short speed, - struct ata_timing *t, int T, int UT) -{ - const struct ata_timing *s; - struct ata_timing p; - - /* - * Find the mode. - */ - - if (!(s = ata_timing_find_mode(speed))) - return -EINVAL; - - memcpy(t, s, sizeof(*s)); - - /* - * If the drive is an EIDE drive, it can tell us it needs extended - * PIO/MW_DMA cycle timing. - */ - - if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ - memset(&p, 0, sizeof(p)); - if(speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) { - if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO]; - else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY]; - } else if(speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) { - p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN]; - } - ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); - } - - /* - * Convert the timing to bus clock counts. - */ - - ata_timing_quantize(t, t, T, UT); - - /* - * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, - * S.M.A.R.T * and some other commands. We have to ensure that the - * DMA cycle timing is slower/equal than the fastest PIO timing. - */ - - if (speed > XFER_PIO_4) { - ata_timing_compute(adev, adev->pio_mode, &p, T, UT); - ata_timing_merge(&p, t, t, ATA_TIMING_ALL); - } - - /* - * Lengthen active & recovery time so that cycle time is correct. - */ - - if (t->act8b + t->rec8b < t->cyc8b) { - t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; - t->rec8b = t->cyc8b - t->act8b; - } - - if (t->active + t->recover < t->cycle) { - t->active += (t->cycle - (t->active + t->recover)) / 2; - t->recover = t->cycle - t->active; - } - - return 0; -} - -/** - * ata_down_xfermask_limit - adjust dev xfer masks downward - * @dev: Device to adjust xfer masks - * @force_pio0: Force PIO0 - * - * Adjust xfer masks of @dev downward. Note that this function - * does not apply the change. Invoking ata_set_mode() afterwards - * will apply the limit. - * - * LOCKING: - * Inherited from caller. - * - * RETURNS: - * 0 on success, negative errno on failure - */ -int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0) -{ - unsigned long xfer_mask; - int highbit; - - xfer_mask = ata_pack_xfermask(dev->pio_mask, dev->mwdma_mask, - dev->udma_mask); - - if (!xfer_mask) - goto fail; - /* don't gear down to MWDMA from UDMA, go directly to PIO */ - if (xfer_mask & ATA_MASK_UDMA) - xfer_mask &= ~ATA_MASK_MWDMA; - - highbit = fls(xfer_mask) - 1; - xfer_mask &= ~(1 << highbit); - if (force_pio0) - xfer_mask &= 1 << ATA_SHIFT_PIO; - if (!xfer_mask) - goto fail; - - ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask, - &dev->udma_mask); - - ata_dev_printk(dev, KERN_WARNING, "limiting speed to %s\n", - ata_mode_string(xfer_mask)); - - return 0; - - fail: - return -EINVAL; -} - -static int ata_dev_set_mode(struct ata_device *dev) -{ - unsigned int err_mask; - int rc; - - dev->flags &= ~ATA_DFLAG_PIO; - if (dev->xfer_shift == ATA_SHIFT_PIO) - dev->flags |= ATA_DFLAG_PIO; - - err_mask = ata_dev_set_xfermode(dev); - if (err_mask) { - ata_dev_printk(dev, KERN_ERR, "failed to set xfermode " - "(err_mask=0x%x)\n", err_mask); - return -EIO; - } - - rc = ata_dev_revalidate(dev, 0); - if (rc) - return rc; - - DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n", - dev->xfer_shift, (int)dev->xfer_mode); - - ata_dev_printk(dev, KERN_INFO, "configured for %s\n", - ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode))); - return 0; -} - -/** - * ata_set_mode - Program timings and issue SET FEATURES - XFER - * @ap: port on which timings will be programmed - * @r_failed_dev: out paramter for failed device - * - * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If - * ata_set_mode() fails, pointer to the failing device is - * returned in @r_failed_dev. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * 0 on success, negative errno otherwise - */ -int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) -{ - struct ata_device *dev; - int i, rc = 0, used_dma = 0, found = 0; - - /* has private set_mode? */ - if (ap->ops->set_mode) { - /* FIXME: make ->set_mode handle no device case and - * return error code and failing device on failure. - */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - if (ata_dev_enabled(&ap->device[i])) { - ap->ops->set_mode(ap); - break; - } - } - return 0; - } - - /* step 1: calculate xfer_mask */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - unsigned int pio_mask, dma_mask; - - dev = &ap->device[i]; - - if (!ata_dev_enabled(dev)) - continue; - - ata_dev_xfermask(dev); - - pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0); - dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask); - dev->pio_mode = ata_xfer_mask2mode(pio_mask); - dev->dma_mode = ata_xfer_mask2mode(dma_mask); - - found = 1; - if (dev->dma_mode) - used_dma = 1; - } - if (!found) - goto out; - - /* step 2: always set host PIO timings */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - if (!ata_dev_enabled(dev)) - continue; - - if (!dev->pio_mode) { - ata_dev_printk(dev, KERN_WARNING, "no PIO support\n"); - rc = -EINVAL; - goto out; - } - - dev->xfer_mode = dev->pio_mode; - dev->xfer_shift = ATA_SHIFT_PIO; - if (ap->ops->set_piomode) - ap->ops->set_piomode(ap, dev); - } - - /* step 3: set host DMA timings */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - - if (!ata_dev_enabled(dev) || !dev->dma_mode) - continue; - - dev->xfer_mode = dev->dma_mode; - dev->xfer_shift = ata_xfer_mode2shift(dev->dma_mode); - if (ap->ops->set_dmamode) - ap->ops->set_dmamode(ap, dev); - } - - /* step 4: update devices' xfer mode */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - - if (!ata_dev_enabled(dev)) - continue; - - rc = ata_dev_set_mode(dev); - if (rc) - goto out; - } - - /* Record simplex status. If we selected DMA then the other - * host channels are not permitted to do so. - */ - if (used_dma && (ap->host_set->flags & ATA_HOST_SIMPLEX)) - ap->host_set->simplex_claimed = 1; - - /* step5: chip specific finalisation */ - if (ap->ops->post_set_mode) - ap->ops->post_set_mode(ap); - - out: - if (rc) - *r_failed_dev = dev; - return rc; -} - -/** - * ata_tf_to_host - issue ATA taskfile to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues ATA taskfile register set to ATA host controller, - * with proper synchronization with interrupt handler and - * other threads. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static inline void ata_tf_to_host(struct ata_port *ap, - const struct ata_taskfile *tf) -{ - ap->ops->tf_load(ap, tf); - ap->ops->exec_command(ap, tf); -} - -/** - * ata_busy_sleep - sleep until BSY clears, or timeout - * @ap: port containing status register to be polled - * @tmout_pat: impatience timeout - * @tmout: overall timeout - * - * Sleep until ATA Status register bit BSY clears, - * or a timeout occurs. - * - * LOCKING: None. - */ - -unsigned int ata_busy_sleep (struct ata_port *ap, - unsigned long tmout_pat, unsigned long tmout) -{ - unsigned long timer_start, timeout; - u8 status; - - status = ata_busy_wait(ap, ATA_BUSY, 300); - timer_start = jiffies; - timeout = timer_start + tmout_pat; - while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) { - msleep(50); - status = ata_busy_wait(ap, ATA_BUSY, 3); - } - - if (status & ATA_BUSY) - ata_port_printk(ap, KERN_WARNING, - "port is slow to respond, please be patient\n"); - - timeout = timer_start + tmout; - while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) { - msleep(50); - status = ata_chk_status(ap); - } - - if (status & ATA_BUSY) { - ata_port_printk(ap, KERN_ERR, "port failed to respond " - "(%lu secs)\n", tmout / HZ); - return 1; - } - - return 0; -} - -static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int dev0 = devmask & (1 << 0); - unsigned int dev1 = devmask & (1 << 1); - unsigned long timeout; - - /* if device 0 was found in ata_devchk, wait for its - * BSY bit to clear - */ - if (dev0) - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); - - /* if device 1 was found in ata_devchk, wait for - * register access, then wait for BSY to clear - */ - timeout = jiffies + ATA_TMOUT_BOOT; - while (dev1) { - u8 nsect, lbal; - - ap->ops->dev_select(ap, 1); - if (ap->flags & ATA_FLAG_MMIO) { - nsect = readb((void __iomem *) ioaddr->nsect_addr); - lbal = readb((void __iomem *) ioaddr->lbal_addr); - } else { - nsect = inb(ioaddr->nsect_addr); - lbal = inb(ioaddr->lbal_addr); - } - if ((nsect == 1) && (lbal == 1)) - break; - if (time_after(jiffies, timeout)) { - dev1 = 0; - break; - } - msleep(50); /* give drive a breather */ - } - if (dev1) - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); - - /* is all this really necessary? */ - ap->ops->dev_select(ap, 0); - if (dev1) - ap->ops->dev_select(ap, 1); - if (dev0) - ap->ops->dev_select(ap, 0); -} - -static unsigned int ata_bus_softreset(struct ata_port *ap, - unsigned int devmask) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - DPRINTK("ata%u: bus reset via SRST\n", ap->id); - - /* software reset. causes dev0 to be selected */ - if (ap->flags & ATA_FLAG_MMIO) { - writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr); - udelay(20); /* FIXME: flush */ - writeb(ap->ctl | ATA_SRST, (void __iomem *) ioaddr->ctl_addr); - udelay(20); /* FIXME: flush */ - writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr); - } else { - outb(ap->ctl, ioaddr->ctl_addr); - udelay(10); - outb(ap->ctl | ATA_SRST, ioaddr->ctl_addr); - udelay(10); - outb(ap->ctl, ioaddr->ctl_addr); - } - - /* spec mandates ">= 2ms" before checking status. - * We wait 150ms, because that was the magic delay used for - * ATAPI devices in Hale Landis's ATADRVR, for the period of time - * between when the ATA command register is written, and then - * status is checked. Because waiting for "a while" before - * checking status is fine, post SRST, we perform this magic - * delay here as well. - * - * Old drivers/ide uses the 2mS rule and then waits for ready - */ - msleep(150); - - /* Before we perform post reset processing we want to see if - * the bus shows 0xFF because the odd clown forgets the D7 - * pulldown resistor. - */ - if (ata_check_status(ap) == 0xFF) { - ata_port_printk(ap, KERN_ERR, "SRST failed (status 0xFF)\n"); - return AC_ERR_OTHER; - } - - ata_bus_post_reset(ap, devmask); - - return 0; -} - -/** - * ata_bus_reset - reset host port and associated ATA channel - * @ap: port to reset - * - * This is typically the first time we actually start issuing - * commands to the ATA channel. We wait for BSY to clear, then - * issue EXECUTE DEVICE DIAGNOSTIC command, polling for its - * result. Determine what devices, if any, are on the channel - * by looking at the device 0/1 error register. Look at the signature - * stored in each device's taskfile registers, to determine if - * the device is ATA or ATAPI. - * - * LOCKING: - * PCI/etc. bus probe sem. - * Obtains host_set lock. - * - * SIDE EFFECTS: - * Sets ATA_FLAG_DISABLED if bus reset fails. - */ - -void ata_bus_reset(struct ata_port *ap) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; - u8 err; - unsigned int dev0, dev1 = 0, devmask = 0; - - DPRINTK("ENTER, host %u, port %u\n", ap->id, ap->port_no); - - /* determine if device 0/1 are present */ - if (ap->flags & ATA_FLAG_SATA_RESET) - dev0 = 1; - else { - dev0 = ata_devchk(ap, 0); - if (slave_possible) - dev1 = ata_devchk(ap, 1); - } - - if (dev0) - devmask |= (1 << 0); - if (dev1) - devmask |= (1 << 1); - - /* select device 0 again */ - ap->ops->dev_select(ap, 0); - - /* issue bus reset */ - if (ap->flags & ATA_FLAG_SRST) - if (ata_bus_softreset(ap, devmask)) - goto err_out; - - /* - * determine by signature whether we have ATA or ATAPI devices - */ - ap->device[0].class = ata_dev_try_classify(ap, 0, &err); - if ((slave_possible) && (err != 0x81)) - ap->device[1].class = ata_dev_try_classify(ap, 1, &err); - - /* re-enable interrupts */ - if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ - ata_irq_on(ap); - - /* is double-select really necessary? */ - if (ap->device[1].class != ATA_DEV_NONE) - ap->ops->dev_select(ap, 1); - if (ap->device[0].class != ATA_DEV_NONE) - ap->ops->dev_select(ap, 0); - - /* if no devices were detected, disable this port */ - if ((ap->device[0].class == ATA_DEV_NONE) && - (ap->device[1].class == ATA_DEV_NONE)) - goto err_out; - - if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) { - /* set up device control for ATA_FLAG_SATA_RESET */ - if (ap->flags & ATA_FLAG_MMIO) - writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr); - else - outb(ap->ctl, ioaddr->ctl_addr); - } - - DPRINTK("EXIT\n"); - return; - -err_out: - ata_port_printk(ap, KERN_ERR, "disabling port\n"); - ap->ops->port_disable(ap); - - DPRINTK("EXIT\n"); -} - -/** - * sata_phy_debounce - debounce SATA phy status - * @ap: ATA port to debounce SATA phy status for - * @params: timing parameters { interval, duratinon, timeout } in msec - * - * Make sure SStatus of @ap reaches stable state, determined by - * holding the same value where DET is not 1 for @duration polled - * every @interval, before @timeout. Timeout constraints the - * beginning of the stable state. Because, after hot unplugging, - * DET gets stuck at 1 on some controllers, this functions waits - * until timeout then returns 0 if DET is stable at 1. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno on failure. - */ -int sata_phy_debounce(struct ata_port *ap, const unsigned long *params) -{ - unsigned long interval_msec = params[0]; - unsigned long duration = params[1] * HZ / 1000; - unsigned long timeout = jiffies + params[2] * HZ / 1000; - unsigned long last_jiffies; - u32 last, cur; - int rc; - - if ((rc = sata_scr_read(ap, SCR_STATUS, &cur))) - return rc; - cur &= 0xf; - - last = cur; - last_jiffies = jiffies; - - while (1) { - msleep(interval_msec); - if ((rc = sata_scr_read(ap, SCR_STATUS, &cur))) - return rc; - cur &= 0xf; - - /* DET stable? */ - if (cur == last) { - if (cur == 1 && time_before(jiffies, timeout)) - continue; - if (time_after(jiffies, last_jiffies + duration)) - return 0; - continue; - } - - /* unstable, start over */ - last = cur; - last_jiffies = jiffies; - - /* check timeout */ - if (time_after(jiffies, timeout)) - return -EBUSY; - } -} - -/** - * sata_phy_resume - resume SATA phy - * @ap: ATA port to resume SATA phy for - * @params: timing parameters { interval, duratinon, timeout } in msec - * - * Resume SATA phy of @ap and debounce it. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno on failure. - */ -int sata_phy_resume(struct ata_port *ap, const unsigned long *params) -{ - u32 scontrol; - int rc; - - if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) - return rc; - - scontrol = (scontrol & 0x0f0) | 0x300; - - if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) - return rc; - - /* Some PHYs react badly if SStatus is pounded immediately - * after resuming. Delay 200ms before debouncing. - */ - msleep(200); - - return sata_phy_debounce(ap, params); -} - -static void ata_wait_spinup(struct ata_port *ap) -{ - struct ata_eh_context *ehc = &ap->eh_context; - unsigned long end, secs; - int rc; - - /* first, debounce phy if SATA */ - if (ap->cbl == ATA_CBL_SATA) { - rc = sata_phy_debounce(ap, sata_deb_timing_eh); - - /* if debounced successfully and offline, no need to wait */ - if ((rc == 0 || rc == -EOPNOTSUPP) && ata_port_offline(ap)) - return; - } - - /* okay, let's give the drive time to spin up */ - end = ehc->i.hotplug_timestamp + ATA_SPINUP_WAIT * HZ / 1000; - secs = ((end - jiffies) + HZ - 1) / HZ; - - if (time_after(jiffies, end)) - return; - - if (secs > 5) - ata_port_printk(ap, KERN_INFO, "waiting for device to spin up " - "(%lu secs)\n", secs); - - schedule_timeout_uninterruptible(end - jiffies); -} - -/** - * ata_std_prereset - prepare for reset - * @ap: ATA port to be reset - * - * @ap is about to be reset. Initialize it. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int ata_std_prereset(struct ata_port *ap) -{ - struct ata_eh_context *ehc = &ap->eh_context; - const unsigned long *timing; - int rc; - - /* hotplug? */ - if (ehc->i.flags & ATA_EHI_HOTPLUGGED) { - if (ap->flags & ATA_FLAG_HRST_TO_RESUME) - ehc->i.action |= ATA_EH_HARDRESET; - if (ap->flags & ATA_FLAG_SKIP_D2H_BSY) - ata_wait_spinup(ap); - } - - /* if we're about to do hardreset, nothing more to do */ - if (ehc->i.action & ATA_EH_HARDRESET) - return 0; - - /* if SATA, resume phy */ - if (ap->cbl == ATA_CBL_SATA) { - if (ap->flags & ATA_FLAG_LOADING) - timing = sata_deb_timing_boot; - else - timing = sata_deb_timing_eh; - - rc = sata_phy_resume(ap, timing); - if (rc && rc != -EOPNOTSUPP) { - /* phy resume failed */ - ata_port_printk(ap, KERN_WARNING, "failed to resume " - "link for reset (errno=%d)\n", rc); - return rc; - } - } - - /* Wait for !BSY if the controller can wait for the first D2H - * Reg FIS and we don't know that no device is attached. - */ - if (!(ap->flags & ATA_FLAG_SKIP_D2H_BSY) && !ata_port_offline(ap)) - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); - - return 0; -} - -/** - * ata_std_softreset - reset host port via ATA SRST - * @ap: port to reset - * @classes: resulting classes of attached devices - * - * Reset host port using ATA SRST. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int ata_std_softreset(struct ata_port *ap, unsigned int *classes) -{ - unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; - unsigned int devmask = 0, err_mask; - u8 err; - - DPRINTK("ENTER\n"); - - if (ata_port_offline(ap)) { - classes[0] = ATA_DEV_NONE; - goto out; - } - - /* determine if device 0/1 are present */ - if (ata_devchk(ap, 0)) - devmask |= (1 << 0); - if (slave_possible && ata_devchk(ap, 1)) - devmask |= (1 << 1); - - /* select device 0 again */ - ap->ops->dev_select(ap, 0); - - /* issue bus reset */ - DPRINTK("about to softreset, devmask=%x\n", devmask); - err_mask = ata_bus_softreset(ap, devmask); - if (err_mask) { - ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n", - err_mask); - return -EIO; - } - - /* determine by signature whether we have ATA or ATAPI devices */ - classes[0] = ata_dev_try_classify(ap, 0, &err); - if (slave_possible && err != 0x81) - classes[1] = ata_dev_try_classify(ap, 1, &err); - - out: - DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]); - return 0; -} - -/** - * sata_std_hardreset - reset host port via SATA phy reset - * @ap: port to reset - * @class: resulting class of attached device - * - * SATA phy-reset host port using DET bits of SControl register. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int sata_std_hardreset(struct ata_port *ap, unsigned int *class) -{ - u32 scontrol; - int rc; - - DPRINTK("ENTER\n"); - - if (sata_set_spd_needed(ap)) { - /* SATA spec says nothing about how to reconfigure - * spd. To be on the safe side, turn off phy during - * reconfiguration. This works for at least ICH7 AHCI - * and Sil3124. - */ - if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) - return rc; - - scontrol = (scontrol & 0x0f0) | 0x302; - - if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) - return rc; - - sata_set_spd(ap); - } - - /* issue phy wake/reset */ - if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) - return rc; - - scontrol = (scontrol & 0x0f0) | 0x301; - - if ((rc = sata_scr_write_flush(ap, SCR_CONTROL, scontrol))) - return rc; - - /* Couldn't find anything in SATA I/II specs, but AHCI-1.1 - * 10.4.2 says at least 1 ms. - */ - msleep(1); - - /* bring phy back */ - sata_phy_resume(ap, sata_deb_timing_eh); - - /* TODO: phy layer with polling, timeouts, etc. */ - if (ata_port_offline(ap)) { - *class = ATA_DEV_NONE; - DPRINTK("EXIT, link offline\n"); - return 0; - } - - if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { - ata_port_printk(ap, KERN_ERR, - "COMRESET failed (device not ready)\n"); - return -EIO; - } - - ap->ops->dev_select(ap, 0); /* probably unnecessary */ - - *class = ata_dev_try_classify(ap, 0, NULL); - - DPRINTK("EXIT, class=%u\n", *class); - return 0; -} - -/** - * ata_std_postreset - standard postreset callback - * @ap: the target ata_port - * @classes: classes of attached devices - * - * This function is invoked after a successful reset. Note that - * the device might have been reset more than once using - * different reset methods before postreset is invoked. - * - * LOCKING: - * Kernel thread context (may sleep) - */ -void ata_std_postreset(struct ata_port *ap, unsigned int *classes) -{ - u32 serror; - - DPRINTK("ENTER\n"); - - /* print link status */ - sata_print_link_status(ap); - - /* clear SError */ - if (sata_scr_read(ap, SCR_ERROR, &serror) == 0) - sata_scr_write(ap, SCR_ERROR, serror); - - /* re-enable interrupts */ - if (!ap->ops->error_handler) { - /* FIXME: hack. create a hook instead */ - if (ap->ioaddr.ctl_addr) - ata_irq_on(ap); - } - - /* is double-select really necessary? */ - if (classes[0] != ATA_DEV_NONE) - ap->ops->dev_select(ap, 1); - if (classes[1] != ATA_DEV_NONE) - ap->ops->dev_select(ap, 0); - - /* bail out if no device is present */ - if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { - DPRINTK("EXIT, no device\n"); - return; - } - - /* set up device control */ - if (ap->ioaddr.ctl_addr) { - if (ap->flags & ATA_FLAG_MMIO) - writeb(ap->ctl, (void __iomem *) ap->ioaddr.ctl_addr); - else - outb(ap->ctl, ap->ioaddr.ctl_addr); - } - - DPRINTK("EXIT\n"); -} - -/** - * ata_dev_same_device - Determine whether new ID matches configured device - * @dev: device to compare against - * @new_class: class of the new device - * @new_id: IDENTIFY page of the new device - * - * Compare @new_class and @new_id against @dev and determine - * whether @dev is the device indicated by @new_class and - * @new_id. - * - * LOCKING: - * None. - * - * RETURNS: - * 1 if @dev matches @new_class and @new_id, 0 otherwise. - */ -static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class, - const u16 *new_id) -{ - const u16 *old_id = dev->id; - unsigned char model[2][41], serial[2][21]; - u64 new_n_sectors; - - if (dev->class != new_class) { - ata_dev_printk(dev, KERN_INFO, "class mismatch %d != %d\n", - dev->class, new_class); - return 0; - } - - ata_id_c_string(old_id, model[0], ATA_ID_PROD_OFS, sizeof(model[0])); - ata_id_c_string(new_id, model[1], ATA_ID_PROD_OFS, sizeof(model[1])); - ata_id_c_string(old_id, serial[0], ATA_ID_SERNO_OFS, sizeof(serial[0])); - ata_id_c_string(new_id, serial[1], ATA_ID_SERNO_OFS, sizeof(serial[1])); - new_n_sectors = ata_id_n_sectors(new_id); - - if (strcmp(model[0], model[1])) { - ata_dev_printk(dev, KERN_INFO, "model number mismatch " - "'%s' != '%s'\n", model[0], model[1]); - return 0; - } - - if (strcmp(serial[0], serial[1])) { - ata_dev_printk(dev, KERN_INFO, "serial number mismatch " - "'%s' != '%s'\n", serial[0], serial[1]); - return 0; - } - - if (dev->class == ATA_DEV_ATA && dev->n_sectors != new_n_sectors) { - ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch " - "%llu != %llu\n", - (unsigned long long)dev->n_sectors, - (unsigned long long)new_n_sectors); - return 0; - } - - return 1; -} - -/** - * ata_dev_revalidate - Revalidate ATA device - * @dev: device to revalidate - * @post_reset: is this revalidation after reset? - * - * Re-read IDENTIFY page and make sure @dev is still attached to - * the port. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, negative errno otherwise - */ -int ata_dev_revalidate(struct ata_device *dev, int post_reset) -{ - unsigned int class = dev->class; - u16 *id = (void *)dev->ap->sector_buf; - int rc; - - if (!ata_dev_enabled(dev)) { - rc = -ENODEV; - goto fail; - } - - /* read ID data */ - rc = ata_dev_read_id(dev, &class, post_reset, id); - if (rc) - goto fail; - - /* is the device still there? */ - if (!ata_dev_same_device(dev, class, id)) { - rc = -ENODEV; - goto fail; - } - - memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS); - - /* configure device according to the new ID */ - rc = ata_dev_configure(dev, 0); - if (rc == 0) - return 0; - - fail: - ata_dev_printk(dev, KERN_ERR, "revalidation failed (errno=%d)\n", rc); - return rc; -} - -static const char * const ata_dma_blacklist [] = { - "WDC AC11000H", NULL, - "WDC AC22100H", NULL, - "WDC AC32500H", NULL, - "WDC AC33100H", NULL, - "WDC AC31600H", NULL, - "WDC AC32100H", "24.09P07", - "WDC AC23200L", "21.10N21", - "Compaq CRD-8241B", NULL, - "CRD-8400B", NULL, - "CRD-8480B", NULL, - "CRD-8482B", NULL, - "CRD-84", NULL, - "SanDisk SDP3B", NULL, - "SanDisk SDP3B-64", NULL, - "SANYO CD-ROM CRD", NULL, - "HITACHI CDR-8", NULL, - "HITACHI CDR-8335", NULL, - "HITACHI CDR-8435", NULL, - "Toshiba CD-ROM XM-6202B", NULL, - "TOSHIBA CD-ROM XM-1702BC", NULL, - "CD-532E-A", NULL, - "E-IDE CD-ROM CR-840", NULL, - "CD-ROM Drive/F5A", NULL, - "WPI CDD-820", NULL, - "SAMSUNG CD-ROM SC-148C", NULL, - "SAMSUNG CD-ROM SC", NULL, - "SanDisk SDP3B-64", NULL, - "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL, - "_NEC DV5800A", NULL, - "SAMSUNG CD-ROM SN-124", "N001" -}; - -static int ata_strim(char *s, size_t len) -{ - len = strnlen(s, len); - - /* ATAPI specifies that empty space is blank-filled; remove blanks */ - while ((len > 0) && (s[len - 1] == ' ')) { - len--; - s[len] = 0; - } - return len; -} - -static int ata_dma_blacklisted(const struct ata_device *dev) -{ - unsigned char model_num[40]; - unsigned char model_rev[16]; - unsigned int nlen, rlen; - int i; - - /* We don't support polling DMA. - * DMA blacklist those ATAPI devices with CDB-intr (and use PIO) - * if the LLDD handles only interrupts in the HSM_ST_LAST state. - */ - if ((dev->ap->flags & ATA_FLAG_PIO_POLLING) && - (dev->flags & ATA_DFLAG_CDB_INTR)) - return 1; - - ata_id_string(dev->id, model_num, ATA_ID_PROD_OFS, - sizeof(model_num)); - ata_id_string(dev->id, model_rev, ATA_ID_FW_REV_OFS, - sizeof(model_rev)); - nlen = ata_strim(model_num, sizeof(model_num)); - rlen = ata_strim(model_rev, sizeof(model_rev)); - - for (i = 0; i < ARRAY_SIZE(ata_dma_blacklist); i += 2) { - if (!strncmp(ata_dma_blacklist[i], model_num, nlen)) { - if (ata_dma_blacklist[i+1] == NULL) - return 1; - if (!strncmp(ata_dma_blacklist[i], model_rev, rlen)) - return 1; - } - } - return 0; -} - -/** - * ata_dev_xfermask - Compute supported xfermask of the given device - * @dev: Device to compute xfermask for - * - * Compute supported xfermask of @dev and store it in - * dev->*_mask. This function is responsible for applying all - * known limits including host controller limits, device - * blacklist, etc... - * - * FIXME: The current implementation limits all transfer modes to - * the fastest of the lowested device on the port. This is not - * required on most controllers. - * - * LOCKING: - * None. - */ -static void ata_dev_xfermask(struct ata_device *dev) -{ - struct ata_port *ap = dev->ap; - struct ata_host_set *hs = ap->host_set; - unsigned long xfer_mask; - int i; - - xfer_mask = ata_pack_xfermask(ap->pio_mask, - ap->mwdma_mask, ap->udma_mask); - - /* Apply cable rule here. Don't apply it early because when - * we handle hot plug the cable type can itself change. - */ - if (ap->cbl == ATA_CBL_PATA40) - xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); - - /* FIXME: Use port-wide xfermask for now */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *d = &ap->device[i]; - - if (ata_dev_absent(d)) - continue; - - if (ata_dev_disabled(d)) { - /* to avoid violating device selection timing */ - xfer_mask &= ata_pack_xfermask(d->pio_mask, - UINT_MAX, UINT_MAX); - continue; - } - - xfer_mask &= ata_pack_xfermask(d->pio_mask, - d->mwdma_mask, d->udma_mask); - xfer_mask &= ata_id_xfermask(d->id); - if (ata_dma_blacklisted(d)) - xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); - } - - if (ata_dma_blacklisted(dev)) - ata_dev_printk(dev, KERN_WARNING, - "device is on DMA blacklist, disabling DMA\n"); - - if (hs->flags & ATA_HOST_SIMPLEX) { - if (hs->simplex_claimed) - xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); - } - - if (ap->ops->mode_filter) - xfer_mask = ap->ops->mode_filter(ap, dev, xfer_mask); - - ata_unpack_xfermask(xfer_mask, &dev->pio_mask, - &dev->mwdma_mask, &dev->udma_mask); -} - -/** - * ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command - * @dev: Device to which command will be sent - * - * Issue SET FEATURES - XFER MODE command to device @dev - * on port @ap. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * 0 on success, AC_ERR_* mask otherwise. - */ - -static unsigned int ata_dev_set_xfermode(struct ata_device *dev) -{ - struct ata_taskfile tf; - unsigned int err_mask; - - /* set up set-features taskfile */ - DPRINTK("set features - xfer mode\n"); - - ata_tf_init(dev, &tf); - tf.command = ATA_CMD_SET_FEATURES; - tf.feature = SETFEATURES_XFER; - tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - tf.protocol = ATA_PROT_NODATA; - tf.nsect = dev->xfer_mode; - - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); - - DPRINTK("EXIT, err_mask=%x\n", err_mask); - return err_mask; -} - -/** - * ata_dev_init_params - Issue INIT DEV PARAMS command - * @dev: Device to which command will be sent - * @heads: Number of heads (taskfile parameter) - * @sectors: Number of sectors (taskfile parameter) - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, AC_ERR_* mask otherwise. - */ -static unsigned int ata_dev_init_params(struct ata_device *dev, - u16 heads, u16 sectors) -{ - struct ata_taskfile tf; - unsigned int err_mask; - - /* Number of sectors per track 1-255. Number of heads 1-16 */ - if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16) - return AC_ERR_INVALID; - - /* set up init dev params taskfile */ - DPRINTK("init dev params \n"); - - ata_tf_init(dev, &tf); - tf.command = ATA_CMD_INIT_DEV_PARAMS; - tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - tf.protocol = ATA_PROT_NODATA; - tf.nsect = sectors; - tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ - - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); - - DPRINTK("EXIT, err_mask=%x\n", err_mask); - return err_mask; -} - -/** - * ata_sg_clean - Unmap DMA memory associated with command - * @qc: Command containing DMA memory to be released - * - * Unmap all mapped DMA memory associated with this command. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_sg_clean(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct scatterlist *sg = qc->__sg; - int dir = qc->dma_dir; - void *pad_buf = NULL; - - WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); - WARN_ON(sg == NULL); - - if (qc->flags & ATA_QCFLAG_SINGLE) - WARN_ON(qc->n_elem > 1); - - VPRINTK("unmapping %u sg elements\n", qc->n_elem); - - /* if we padded the buffer out to 32-bit bound, and data - * xfer direction is from-device, we must copy from the - * pad buffer back into the supplied buffer - */ - if (qc->pad_len && !(qc->tf.flags & ATA_TFLAG_WRITE)) - pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); - - if (qc->flags & ATA_QCFLAG_SG) { - if (qc->n_elem) - dma_unmap_sg(ap->dev, sg, qc->n_elem, dir); - /* restore last sg */ - sg[qc->orig_n_elem - 1].length += qc->pad_len; - if (pad_buf) { - struct scatterlist *psg = &qc->pad_sgent; - void *addr = kmap_atomic(psg->page, KM_IRQ0); - memcpy(addr + psg->offset, pad_buf, qc->pad_len); - kunmap_atomic(addr, KM_IRQ0); - } - } else { - if (qc->n_elem) - dma_unmap_single(ap->dev, - sg_dma_address(&sg[0]), sg_dma_len(&sg[0]), - dir); - /* restore sg */ - sg->length += qc->pad_len; - if (pad_buf) - memcpy(qc->buf_virt + sg->length - qc->pad_len, - pad_buf, qc->pad_len); - } - - qc->flags &= ~ATA_QCFLAG_DMAMAP; - qc->__sg = NULL; -} - -/** - * ata_fill_sg - Fill PCI IDE PRD table - * @qc: Metadata associated with taskfile to be transferred - * - * Fill PCI IDE PRD (scatter-gather) table with segments - * associated with the current disk command. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - */ -static void ata_fill_sg(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct scatterlist *sg; - unsigned int idx; - - WARN_ON(qc->__sg == NULL); - WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); - - idx = 0; - ata_for_each_sg(sg, qc) { - u32 addr, offset; - u32 sg_len, len; - - /* determine if physical DMA addr spans 64K boundary. - * Note h/w doesn't support 64-bit, so we unconditionally - * truncate dma_addr_t to u32. - */ - addr = (u32) sg_dma_address(sg); - sg_len = sg_dma_len(sg); - - while (sg_len) { - offset = addr & 0xffff; - len = sg_len; - if ((offset + sg_len) > 0x10000) - len = 0x10000 - offset; - - ap->prd[idx].addr = cpu_to_le32(addr); - ap->prd[idx].flags_len = cpu_to_le32(len & 0xffff); - VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len); - - idx++; - sg_len -= len; - addr += len; - } - } - - if (idx) - ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); -} -/** - * ata_check_atapi_dma - Check whether ATAPI DMA can be supported - * @qc: Metadata associated with taskfile to check - * - * Allow low-level driver to filter ATA PACKET commands, returning - * a status indicating whether or not it is OK to use DMA for the - * supplied PACKET command. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: 0 when ATAPI DMA can be used - * nonzero otherwise - */ -int ata_check_atapi_dma(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - int rc = 0; /* Assume ATAPI DMA is OK by default */ - - if (ap->ops->check_atapi_dma) - rc = ap->ops->check_atapi_dma(qc); - - return rc; -} -/** - * ata_qc_prep - Prepare taskfile for submission - * @qc: Metadata associated with taskfile to be prepared - * - * Prepare ATA taskfile for submission. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_qc_prep(struct ata_queued_cmd *qc) -{ - if (!(qc->flags & ATA_QCFLAG_DMAMAP)) - return; - - ata_fill_sg(qc); -} - -void ata_noop_qc_prep(struct ata_queued_cmd *qc) { } - -/** - * ata_sg_init_one - Associate command with memory buffer - * @qc: Command to be associated - * @buf: Memory buffer - * @buflen: Length of memory buffer, in bytes. - * - * Initialize the data-related elements of queued_cmd @qc - * to point to a single memory buffer, @buf of byte length @buflen. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) -{ - struct scatterlist *sg; - - qc->flags |= ATA_QCFLAG_SINGLE; - - memset(&qc->sgent, 0, sizeof(qc->sgent)); - qc->__sg = &qc->sgent; - qc->n_elem = 1; - qc->orig_n_elem = 1; - qc->buf_virt = buf; - qc->nbytes = buflen; - - sg = qc->__sg; - sg_init_one(sg, buf, buflen); -} - -/** - * ata_sg_init - Associate command with scatter-gather table. - * @qc: Command to be associated - * @sg: Scatter-gather table. - * @n_elem: Number of elements in s/g table. - * - * Initialize the data-related elements of queued_cmd @qc - * to point to a scatter-gather table @sg, containing @n_elem - * elements. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, - unsigned int n_elem) -{ - qc->flags |= ATA_QCFLAG_SG; - qc->__sg = sg; - qc->n_elem = n_elem; - qc->orig_n_elem = n_elem; -} - -/** - * ata_sg_setup_one - DMA-map the memory buffer associated with a command. - * @qc: Command with memory buffer to be mapped. - * - * DMA-map the memory buffer associated with queued_cmd @qc. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Zero on success, negative on error. - */ - -static int ata_sg_setup_one(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - int dir = qc->dma_dir; - struct scatterlist *sg = qc->__sg; - dma_addr_t dma_address; - int trim_sg = 0; - - /* we must lengthen transfers to end on a 32-bit boundary */ - qc->pad_len = sg->length & 3; - if (qc->pad_len) { - void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); - struct scatterlist *psg = &qc->pad_sgent; - - WARN_ON(qc->dev->class != ATA_DEV_ATAPI); - - memset(pad_buf, 0, ATA_DMA_PAD_SZ); - - if (qc->tf.flags & ATA_TFLAG_WRITE) - memcpy(pad_buf, qc->buf_virt + sg->length - qc->pad_len, - qc->pad_len); - - sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ); - sg_dma_len(psg) = ATA_DMA_PAD_SZ; - /* trim sg */ - sg->length -= qc->pad_len; - if (sg->length == 0) - trim_sg = 1; - - DPRINTK("padding done, sg->length=%u pad_len=%u\n", - sg->length, qc->pad_len); - } - - if (trim_sg) { - qc->n_elem--; - goto skip_map; - } - - dma_address = dma_map_single(ap->dev, qc->buf_virt, - sg->length, dir); - if (dma_mapping_error(dma_address)) { - /* restore sg */ - sg->length += qc->pad_len; - return -1; - } - - sg_dma_address(sg) = dma_address; - sg_dma_len(sg) = sg->length; - -skip_map: - DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg), - qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - - return 0; -} - -/** - * ata_sg_setup - DMA-map the scatter-gather table associated with a command. - * @qc: Command with scatter-gather table to be mapped. - * - * DMA-map the scatter-gather table associated with queued_cmd @qc. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Zero on success, negative on error. - * - */ - -static int ata_sg_setup(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct scatterlist *sg = qc->__sg; - struct scatterlist *lsg = &sg[qc->n_elem - 1]; - int n_elem, pre_n_elem, dir, trim_sg = 0; - - VPRINTK("ENTER, ata%u\n", ap->id); - WARN_ON(!(qc->flags & ATA_QCFLAG_SG)); - - /* we must lengthen transfers to end on a 32-bit boundary */ - qc->pad_len = lsg->length & 3; - if (qc->pad_len) { - void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); - struct scatterlist *psg = &qc->pad_sgent; - unsigned int offset; - - WARN_ON(qc->dev->class != ATA_DEV_ATAPI); - - memset(pad_buf, 0, ATA_DMA_PAD_SZ); - - /* - * psg->page/offset are used to copy to-be-written - * data in this function or read data in ata_sg_clean. - */ - offset = lsg->offset + lsg->length - qc->pad_len; - psg->page = nth_page(lsg->page, offset >> PAGE_SHIFT); - psg->offset = offset_in_page(offset); - - if (qc->tf.flags & ATA_TFLAG_WRITE) { - void *addr = kmap_atomic(psg->page, KM_IRQ0); - memcpy(pad_buf, addr + psg->offset, qc->pad_len); - kunmap_atomic(addr, KM_IRQ0); - } - - sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ); - sg_dma_len(psg) = ATA_DMA_PAD_SZ; - /* trim last sg */ - lsg->length -= qc->pad_len; - if (lsg->length == 0) - trim_sg = 1; - - DPRINTK("padding done, sg[%d].length=%u pad_len=%u\n", - qc->n_elem - 1, lsg->length, qc->pad_len); - } - - pre_n_elem = qc->n_elem; - if (trim_sg && pre_n_elem) - pre_n_elem--; - - if (!pre_n_elem) { - n_elem = 0; - goto skip_map; - } - - dir = qc->dma_dir; - n_elem = dma_map_sg(ap->dev, sg, pre_n_elem, dir); - if (n_elem < 1) { - /* restore last sg */ - lsg->length += qc->pad_len; - return -1; - } - - DPRINTK("%d sg elements mapped\n", n_elem); - -skip_map: - qc->n_elem = n_elem; - - return 0; -} - -/** - * swap_buf_le16 - swap halves of 16-bit words in place - * @buf: Buffer to swap - * @buf_words: Number of 16-bit words in buffer. - * - * Swap halves of 16-bit words if needed to convert from - * little-endian byte order to native cpu byte order, or - * vice-versa. - * - * LOCKING: - * Inherited from caller. - */ -void swap_buf_le16(u16 *buf, unsigned int buf_words) -{ -#ifdef __BIG_ENDIAN - unsigned int i; - - for (i = 0; i < buf_words; i++) - buf[i] = le16_to_cpu(buf[i]); -#endif /* __BIG_ENDIAN */ -} - -/** - * ata_mmio_data_xfer - Transfer data by MMIO - * @adev: device for this I/O - * @buf: data buffer - * @buflen: buffer length - * @write_data: read/write - * - * Transfer data from/to the device data register by MMIO. - * - * LOCKING: - * Inherited from caller. - */ - -void ata_mmio_data_xfer(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) -{ - struct ata_port *ap = adev->ap; - unsigned int i; - unsigned int words = buflen >> 1; - u16 *buf16 = (u16 *) buf; - void __iomem *mmio = (void __iomem *)ap->ioaddr.data_addr; - - /* Transfer multiple of 2 bytes */ - if (write_data) { - for (i = 0; i < words; i++) - writew(le16_to_cpu(buf16[i]), mmio); - } else { - for (i = 0; i < words; i++) - buf16[i] = cpu_to_le16(readw(mmio)); - } - - /* Transfer trailing 1 byte, if any. */ - if (unlikely(buflen & 0x01)) { - u16 align_buf[1] = { 0 }; - unsigned char *trailing_buf = buf + buflen - 1; - - if (write_data) { - memcpy(align_buf, trailing_buf, 1); - writew(le16_to_cpu(align_buf[0]), mmio); - } else { - align_buf[0] = cpu_to_le16(readw(mmio)); - memcpy(trailing_buf, align_buf, 1); - } - } -} - -/** - * ata_pio_data_xfer - Transfer data by PIO - * @adev: device to target - * @buf: data buffer - * @buflen: buffer length - * @write_data: read/write - * - * Transfer data from/to the device data register by PIO. - * - * LOCKING: - * Inherited from caller. - */ - -void ata_pio_data_xfer(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) -{ - struct ata_port *ap = adev->ap; - unsigned int words = buflen >> 1; - - /* Transfer multiple of 2 bytes */ - if (write_data) - outsw(ap->ioaddr.data_addr, buf, words); - else - insw(ap->ioaddr.data_addr, buf, words); - - /* Transfer trailing 1 byte, if any. */ - if (unlikely(buflen & 0x01)) { - u16 align_buf[1] = { 0 }; - unsigned char *trailing_buf = buf + buflen - 1; - - if (write_data) { - memcpy(align_buf, trailing_buf, 1); - outw(le16_to_cpu(align_buf[0]), ap->ioaddr.data_addr); - } else { - align_buf[0] = cpu_to_le16(inw(ap->ioaddr.data_addr)); - memcpy(trailing_buf, align_buf, 1); - } - } -} - -/** - * ata_pio_data_xfer_noirq - Transfer data by PIO - * @adev: device to target - * @buf: data buffer - * @buflen: buffer length - * @write_data: read/write - * - * Transfer data from/to the device data register by PIO. Do the - * transfer with interrupts disabled. - * - * LOCKING: - * Inherited from caller. - */ - -void ata_pio_data_xfer_noirq(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) -{ - unsigned long flags; - local_irq_save(flags); - ata_pio_data_xfer(adev, buf, buflen, write_data); - local_irq_restore(flags); -} - - -/** - * ata_pio_sector - Transfer ATA_SECT_SIZE (512 bytes) of data. - * @qc: Command on going - * - * Transfer ATA_SECT_SIZE of data from/to the ATA device. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_pio_sector(struct ata_queued_cmd *qc) -{ - int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); - struct scatterlist *sg = qc->__sg; - struct ata_port *ap = qc->ap; - struct page *page; - unsigned int offset; - unsigned char *buf; - - if (qc->cursect == (qc->nsect - 1)) - ap->hsm_task_state = HSM_ST_LAST; - - page = sg[qc->cursg].page; - offset = sg[qc->cursg].offset + qc->cursg_ofs * ATA_SECT_SIZE; - - /* get the current page and offset */ - page = nth_page(page, (offset >> PAGE_SHIFT)); - offset %= PAGE_SIZE; - - DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - - if (PageHighMem(page)) { - unsigned long flags; - - /* FIXME: use a bounce buffer */ - local_irq_save(flags); - buf = kmap_atomic(page, KM_IRQ0); - - /* do the actual data transfer */ - ap->ops->data_xfer(qc->dev, buf + offset, ATA_SECT_SIZE, do_write); - - kunmap_atomic(buf, KM_IRQ0); - local_irq_restore(flags); - } else { - buf = page_address(page); - ap->ops->data_xfer(qc->dev, buf + offset, ATA_SECT_SIZE, do_write); - } - - qc->cursect++; - qc->cursg_ofs++; - - if ((qc->cursg_ofs * ATA_SECT_SIZE) == (&sg[qc->cursg])->length) { - qc->cursg++; - qc->cursg_ofs = 0; - } -} - -/** - * ata_pio_sectors - Transfer one or many 512-byte sectors. - * @qc: Command on going - * - * Transfer one or many ATA_SECT_SIZE of data from/to the - * ATA device for the DRQ request. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_pio_sectors(struct ata_queued_cmd *qc) -{ - if (is_multi_taskfile(&qc->tf)) { - /* READ/WRITE MULTIPLE */ - unsigned int nsect; - - WARN_ON(qc->dev->multi_count == 0); - - nsect = min(qc->nsect - qc->cursect, qc->dev->multi_count); - while (nsect--) - ata_pio_sector(qc); - } else - ata_pio_sector(qc); -} - -/** - * atapi_send_cdb - Write CDB bytes to hardware - * @ap: Port to which ATAPI device is attached. - * @qc: Taskfile currently active - * - * When device has indicated its readiness to accept - * a CDB, this function is called. Send the CDB. - * - * LOCKING: - * caller. - */ - -static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) -{ - /* send SCSI cdb */ - DPRINTK("send cdb\n"); - WARN_ON(qc->dev->cdb_len < 12); - - ap->ops->data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1); - ata_altstatus(ap); /* flush */ - - switch (qc->tf.protocol) { - case ATA_PROT_ATAPI: - ap->hsm_task_state = HSM_ST; - break; - case ATA_PROT_ATAPI_NODATA: - ap->hsm_task_state = HSM_ST_LAST; - break; - case ATA_PROT_ATAPI_DMA: - ap->hsm_task_state = HSM_ST_LAST; - /* initiate bmdma */ - ap->ops->bmdma_start(qc); - break; - } -} - -/** - * __atapi_pio_bytes - Transfer data from/to the ATAPI device. - * @qc: Command on going - * @bytes: number of bytes - * - * Transfer Transfer data from/to the ATAPI device. - * - * LOCKING: - * Inherited from caller. - * - */ - -static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) -{ - int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); - struct scatterlist *sg = qc->__sg; - struct ata_port *ap = qc->ap; - struct page *page; - unsigned char *buf; - unsigned int offset, count; - - if (qc->curbytes + bytes >= qc->nbytes) - ap->hsm_task_state = HSM_ST_LAST; - -next_sg: - if (unlikely(qc->cursg >= qc->n_elem)) { - /* - * The end of qc->sg is reached and the device expects - * more data to transfer. In order not to overrun qc->sg - * and fulfill length specified in the byte count register, - * - for read case, discard trailing data from the device - * - for write case, padding zero data to the device - */ - u16 pad_buf[1] = { 0 }; - unsigned int words = bytes >> 1; - unsigned int i; - - if (words) /* warning if bytes > 1 */ - ata_dev_printk(qc->dev, KERN_WARNING, - "%u bytes trailing data\n", bytes); - - for (i = 0; i < words; i++) - ap->ops->data_xfer(qc->dev, (unsigned char*)pad_buf, 2, do_write); - - ap->hsm_task_state = HSM_ST_LAST; - return; - } - - sg = &qc->__sg[qc->cursg]; - - page = sg->page; - offset = sg->offset + qc->cursg_ofs; - - /* get the current page and offset */ - page = nth_page(page, (offset >> PAGE_SHIFT)); - offset %= PAGE_SIZE; - - /* don't overrun current sg */ - count = min(sg->length - qc->cursg_ofs, bytes); - - /* don't cross page boundaries */ - count = min(count, (unsigned int)PAGE_SIZE - offset); - - DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - - if (PageHighMem(page)) { - unsigned long flags; - - /* FIXME: use bounce buffer */ - local_irq_save(flags); - buf = kmap_atomic(page, KM_IRQ0); - - /* do the actual data transfer */ - ap->ops->data_xfer(qc->dev, buf + offset, count, do_write); - - kunmap_atomic(buf, KM_IRQ0); - local_irq_restore(flags); - } else { - buf = page_address(page); - ap->ops->data_xfer(qc->dev, buf + offset, count, do_write); - } - - bytes -= count; - qc->curbytes += count; - qc->cursg_ofs += count; - - if (qc->cursg_ofs == sg->length) { - qc->cursg++; - qc->cursg_ofs = 0; - } - - if (bytes) - goto next_sg; -} - -/** - * atapi_pio_bytes - Transfer data from/to the ATAPI device. - * @qc: Command on going - * - * Transfer Transfer data from/to the ATAPI device. - * - * LOCKING: - * Inherited from caller. - */ - -static void atapi_pio_bytes(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct ata_device *dev = qc->dev; - unsigned int ireason, bc_lo, bc_hi, bytes; - int i_write, do_write = (qc->tf.flags & ATA_TFLAG_WRITE) ? 1 : 0; - - /* Abuse qc->result_tf for temp storage of intermediate TF - * here to save some kernel stack usage. - * For normal completion, qc->result_tf is not relevant. For - * error, qc->result_tf is later overwritten by ata_qc_complete(). - * So, the correctness of qc->result_tf is not affected. - */ - ap->ops->tf_read(ap, &qc->result_tf); - ireason = qc->result_tf.nsect; - bc_lo = qc->result_tf.lbam; - bc_hi = qc->result_tf.lbah; - bytes = (bc_hi << 8) | bc_lo; - - /* shall be cleared to zero, indicating xfer of data */ - if (ireason & (1 << 0)) - goto err_out; - - /* make sure transfer direction matches expected */ - i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0; - if (do_write != i_write) - goto err_out; - - VPRINTK("ata%u: xfering %d bytes\n", ap->id, bytes); - - __atapi_pio_bytes(qc, bytes); - - return; - -err_out: - ata_dev_printk(dev, KERN_INFO, "ATAPI check failed\n"); - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; -} - -/** - * ata_hsm_ok_in_wq - Check if the qc can be handled in the workqueue. - * @ap: the target ata_port - * @qc: qc on going - * - * RETURNS: - * 1 if ok in workqueue, 0 otherwise. - */ - -static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *qc) -{ - if (qc->tf.flags & ATA_TFLAG_POLLING) - return 1; - - if (ap->hsm_task_state == HSM_ST_FIRST) { - if (qc->tf.protocol == ATA_PROT_PIO && - (qc->tf.flags & ATA_TFLAG_WRITE)) - return 1; - - if (is_atapi_taskfile(&qc->tf) && - !(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - return 1; - } - - return 0; -} - -/** - * ata_hsm_qc_complete - finish a qc running on standard HSM - * @qc: Command to complete - * @in_wq: 1 if called from workqueue, 0 otherwise - * - * Finish @qc which is running on standard HSM. - * - * LOCKING: - * If @in_wq is zero, spin_lock_irqsave(host_set lock). - * Otherwise, none on entry and grabs host lock. - */ -static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) -{ - struct ata_port *ap = qc->ap; - unsigned long flags; - - if (ap->ops->error_handler) { - if (in_wq) { - spin_lock_irqsave(ap->lock, flags); - - /* EH might have kicked in while host_set lock - * is released. - */ - qc = ata_qc_from_tag(ap, qc->tag); - if (qc) { - if (likely(!(qc->err_mask & AC_ERR_HSM))) { - ata_irq_on(ap); - ata_qc_complete(qc); - } else - ata_port_freeze(ap); - } - - spin_unlock_irqrestore(ap->lock, flags); - } else { - if (likely(!(qc->err_mask & AC_ERR_HSM))) - ata_qc_complete(qc); - else - ata_port_freeze(ap); - } - } else { - if (in_wq) { - spin_lock_irqsave(ap->lock, flags); - ata_irq_on(ap); - ata_qc_complete(qc); - spin_unlock_irqrestore(ap->lock, flags); - } else - ata_qc_complete(qc); - } - - ata_altstatus(ap); /* flush */ -} - -/** - * ata_hsm_move - move the HSM to the next state. - * @ap: the target ata_port - * @qc: qc on going - * @status: current device status - * @in_wq: 1 if called from workqueue, 0 otherwise - * - * RETURNS: - * 1 when poll next status needed, 0 otherwise. - */ -int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, - u8 status, int in_wq) -{ - unsigned long flags = 0; - int poll_next; - - WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0); - - /* Make sure ata_qc_issue_prot() does not throw things - * like DMA polling into the workqueue. Notice that - * in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING). - */ - WARN_ON(in_wq != ata_hsm_ok_in_wq(ap, qc)); - -fsm_start: - DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n", - ap->id, qc->tf.protocol, ap->hsm_task_state, status); - - switch (ap->hsm_task_state) { - case HSM_ST_FIRST: - /* Send first data block or PACKET CDB */ - - /* If polling, we will stay in the work queue after - * sending the data. Otherwise, interrupt handler - * takes over after sending the data. - */ - poll_next = (qc->tf.flags & ATA_TFLAG_POLLING); - - /* check device status */ - if (unlikely((status & ATA_DRQ) == 0)) { - /* handle BSY=0, DRQ=0 as error */ - if (likely(status & (ATA_ERR | ATA_DF))) - /* device stops HSM for abort/error */ - qc->err_mask |= AC_ERR_DEV; - else - /* HSM violation. Let EH handle this */ - qc->err_mask |= AC_ERR_HSM; - - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - /* Device should not ask for data transfer (DRQ=1) - * when it finds something wrong. - * We ignore DRQ here and stop the HSM by - * changing hsm_task_state to HSM_ST_ERR and - * let the EH abort the command or reset the device. - */ - if (unlikely(status & (ATA_ERR | ATA_DF))) { - printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n", - ap->id, status); - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - /* Send the CDB (atapi) or the first data block (ata pio out). - * During the state transition, interrupt handler shouldn't - * be invoked before the data transfer is complete and - * hsm_task_state is changed. Hence, the following locking. - */ - if (in_wq) - spin_lock_irqsave(ap->lock, flags); - - if (qc->tf.protocol == ATA_PROT_PIO) { - /* PIO data out protocol. - * send first data block. - */ - - /* ata_pio_sectors() might change the state - * to HSM_ST_LAST. so, the state is changed here - * before ata_pio_sectors(). - */ - ap->hsm_task_state = HSM_ST; - ata_pio_sectors(qc); - ata_altstatus(ap); /* flush */ - } else - /* send CDB */ - atapi_send_cdb(ap, qc); - - if (in_wq) - spin_unlock_irqrestore(ap->lock, flags); - - /* if polling, ata_pio_task() handles the rest. - * otherwise, interrupt handler takes over from here. - */ - break; - - case HSM_ST: - /* complete command or read/write the data register */ - if (qc->tf.protocol == ATA_PROT_ATAPI) { - /* ATAPI PIO protocol */ - if ((status & ATA_DRQ) == 0) { - /* No more data to transfer or device error. - * Device error will be tagged in HSM_ST_LAST. - */ - ap->hsm_task_state = HSM_ST_LAST; - goto fsm_start; - } - - /* Device should not ask for data transfer (DRQ=1) - * when it finds something wrong. - * We ignore DRQ here and stop the HSM by - * changing hsm_task_state to HSM_ST_ERR and - * let the EH abort the command or reset the device. - */ - if (unlikely(status & (ATA_ERR | ATA_DF))) { - printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n", - ap->id, status); - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - atapi_pio_bytes(qc); - - if (unlikely(ap->hsm_task_state == HSM_ST_ERR)) - /* bad ireason reported by device */ - goto fsm_start; - - } else { - /* ATA PIO protocol */ - if (unlikely((status & ATA_DRQ) == 0)) { - /* handle BSY=0, DRQ=0 as error */ - if (likely(status & (ATA_ERR | ATA_DF))) - /* device stops HSM for abort/error */ - qc->err_mask |= AC_ERR_DEV; - else - /* HSM violation. Let EH handle this */ - qc->err_mask |= AC_ERR_HSM; - - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - /* For PIO reads, some devices may ask for - * data transfer (DRQ=1) alone with ERR=1. - * We respect DRQ here and transfer one - * block of junk data before changing the - * hsm_task_state to HSM_ST_ERR. - * - * For PIO writes, ERR=1 DRQ=1 doesn't make - * sense since the data block has been - * transferred to the device. - */ - if (unlikely(status & (ATA_ERR | ATA_DF))) { - /* data might be corrputed */ - qc->err_mask |= AC_ERR_DEV; - - if (!(qc->tf.flags & ATA_TFLAG_WRITE)) { - ata_pio_sectors(qc); - ata_altstatus(ap); - status = ata_wait_idle(ap); - } - - if (status & (ATA_BUSY | ATA_DRQ)) - qc->err_mask |= AC_ERR_HSM; - - /* ata_pio_sectors() might change the - * state to HSM_ST_LAST. so, the state - * is changed after ata_pio_sectors(). - */ - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - ata_pio_sectors(qc); - - if (ap->hsm_task_state == HSM_ST_LAST && - (!(qc->tf.flags & ATA_TFLAG_WRITE))) { - /* all data read */ - ata_altstatus(ap); - status = ata_wait_idle(ap); - goto fsm_start; - } - } - - ata_altstatus(ap); /* flush */ - poll_next = 1; - break; - - case HSM_ST_LAST: - if (unlikely(!ata_ok(status))) { - qc->err_mask |= __ac_err_mask(status); - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; - } - - /* no more data to transfer */ - DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n", - ap->id, qc->dev->devno, status); - - WARN_ON(qc->err_mask); - - ap->hsm_task_state = HSM_ST_IDLE; - - /* complete taskfile transaction */ - ata_hsm_qc_complete(qc, in_wq); - - poll_next = 0; - break; - - case HSM_ST_ERR: - /* make sure qc->err_mask is available to - * know what's wrong and recover - */ - WARN_ON(qc->err_mask == 0); - - ap->hsm_task_state = HSM_ST_IDLE; - - /* complete taskfile transaction */ - ata_hsm_qc_complete(qc, in_wq); - - poll_next = 0; - break; - default: - poll_next = 0; - BUG(); - } - - return poll_next; -} - -static void ata_pio_task(void *_data) -{ - struct ata_queued_cmd *qc = _data; - struct ata_port *ap = qc->ap; - u8 status; - int poll_next; - -fsm_start: - WARN_ON(ap->hsm_task_state == HSM_ST_IDLE); - - /* - * This is purely heuristic. This is a fast path. - * Sometimes when we enter, BSY will be cleared in - * a chk-status or two. If not, the drive is probably seeking - * or something. Snooze for a couple msecs, then - * chk-status again. If still busy, queue delayed work. - */ - status = ata_busy_wait(ap, ATA_BUSY, 5); - if (status & ATA_BUSY) { - msleep(2); - status = ata_busy_wait(ap, ATA_BUSY, 10); - if (status & ATA_BUSY) { - ata_port_queue_task(ap, ata_pio_task, qc, ATA_SHORT_PAUSE); - return; - } - } - - /* move the HSM */ - poll_next = ata_hsm_move(ap, qc, status, 1); - - /* another command or interrupt handler - * may be running at this point. - */ - if (poll_next) - goto fsm_start; -} - -/** - * ata_qc_new - Request an available ATA command, for queueing - * @ap: Port associated with device @dev - * @dev: Device from whom we request an available command structure - * - * LOCKING: - * None. - */ - -static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) -{ - struct ata_queued_cmd *qc = NULL; - unsigned int i; - - /* no command while frozen */ - if (unlikely(ap->flags & ATA_FLAG_FROZEN)) - return NULL; - - /* the last tag is reserved for internal command. */ - for (i = 0; i < ATA_MAX_QUEUE - 1; i++) - if (!test_and_set_bit(i, &ap->qc_allocated)) { - qc = __ata_qc_from_tag(ap, i); - break; - } - - if (qc) - qc->tag = i; - - return qc; -} - -/** - * ata_qc_new_init - Request an available ATA command, and initialize it - * @dev: Device from whom we request an available command structure - * - * LOCKING: - * None. - */ - -struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) -{ - struct ata_port *ap = dev->ap; - struct ata_queued_cmd *qc; - - qc = ata_qc_new(ap); - if (qc) { - qc->scsicmd = NULL; - qc->ap = ap; - qc->dev = dev; - - ata_qc_reinit(qc); - } - - return qc; -} - -/** - * ata_qc_free - free unused ata_queued_cmd - * @qc: Command to complete - * - * Designed to free unused ata_queued_cmd object - * in case something prevents using it. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_qc_free(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int tag; - - WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ - - qc->flags = 0; - tag = qc->tag; - if (likely(ata_tag_valid(tag))) { - qc->tag = ATA_TAG_POISON; - clear_bit(tag, &ap->qc_allocated); - } -} - -void __ata_qc_complete(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ - WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); - - if (likely(qc->flags & ATA_QCFLAG_DMAMAP)) - ata_sg_clean(qc); - - /* command should be marked inactive atomically with qc completion */ - if (qc->tf.protocol == ATA_PROT_NCQ) - ap->sactive &= ~(1 << qc->tag); - else - ap->active_tag = ATA_TAG_POISON; - - /* atapi: mark qc as inactive to prevent the interrupt handler - * from completing the command twice later, before the error handler - * is called. (when rc != 0 and atapi request sense is needed) - */ - qc->flags &= ~ATA_QCFLAG_ACTIVE; - ap->qc_active &= ~(1 << qc->tag); - - /* call completion callback */ - qc->complete_fn(qc); -} - -/** - * ata_qc_complete - Complete an active ATA command - * @qc: Command to complete - * @err_mask: ATA Status register contents - * - * Indicate to the mid and upper layers that an ATA - * command has completed, with either an ok or not-ok status. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_qc_complete(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - /* XXX: New EH and old EH use different mechanisms to - * synchronize EH with regular execution path. - * - * In new EH, a failed qc is marked with ATA_QCFLAG_FAILED. - * Normal execution path is responsible for not accessing a - * failed qc. libata core enforces the rule by returning NULL - * from ata_qc_from_tag() for failed qcs. - * - * Old EH depends on ata_qc_complete() nullifying completion - * requests if ATA_QCFLAG_EH_SCHEDULED is set. Old EH does - * not synchronize with interrupt handler. Only PIO task is - * taken care of. - */ - if (ap->ops->error_handler) { - WARN_ON(ap->flags & ATA_FLAG_FROZEN); - - if (unlikely(qc->err_mask)) - qc->flags |= ATA_QCFLAG_FAILED; - - if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) { - if (!ata_tag_internal(qc->tag)) { - /* always fill result TF for failed qc */ - ap->ops->tf_read(ap, &qc->result_tf); - ata_qc_schedule_eh(qc); - return; - } - } - - /* read result TF if requested */ - if (qc->flags & ATA_QCFLAG_RESULT_TF) - ap->ops->tf_read(ap, &qc->result_tf); - - __ata_qc_complete(qc); - } else { - if (qc->flags & ATA_QCFLAG_EH_SCHEDULED) - return; - - /* read result TF if failed or requested */ - if (qc->err_mask || qc->flags & ATA_QCFLAG_RESULT_TF) - ap->ops->tf_read(ap, &qc->result_tf); - - __ata_qc_complete(qc); - } -} - -/** - * ata_qc_complete_multiple - Complete multiple qcs successfully - * @ap: port in question - * @qc_active: new qc_active mask - * @finish_qc: LLDD callback invoked before completing a qc - * - * Complete in-flight commands. This functions is meant to be - * called from low-level driver's interrupt routine to complete - * requests normally. ap->qc_active and @qc_active is compared - * and commands are completed accordingly. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Number of completed commands on success, -errno otherwise. - */ -int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active, - void (*finish_qc)(struct ata_queued_cmd *)) -{ - int nr_done = 0; - u32 done_mask; - int i; - - done_mask = ap->qc_active ^ qc_active; - - if (unlikely(done_mask & qc_active)) { - ata_port_printk(ap, KERN_ERR, "illegal qc_active transition " - "(%08x->%08x)\n", ap->qc_active, qc_active); - return -EINVAL; - } - - for (i = 0; i < ATA_MAX_QUEUE; i++) { - struct ata_queued_cmd *qc; - - if (!(done_mask & (1 << i))) - continue; - - if ((qc = ata_qc_from_tag(ap, i))) { - if (finish_qc) - finish_qc(qc); - ata_qc_complete(qc); - nr_done++; - } - } - - return nr_done; -} - -static inline int ata_should_dma_map(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - switch (qc->tf.protocol) { - case ATA_PROT_NCQ: - case ATA_PROT_DMA: - case ATA_PROT_ATAPI_DMA: - return 1; - - case ATA_PROT_ATAPI: - case ATA_PROT_PIO: - if (ap->flags & ATA_FLAG_PIO_DMA) - return 1; - - /* fall through */ - - default: - return 0; - } - - /* never reached */ -} - -/** - * ata_qc_issue - issue taskfile to device - * @qc: command to issue to device - * - * Prepare an ATA command to submission to device. - * This includes mapping the data into a DMA-able - * area, filling in the S/G table, and finally - * writing the taskfile to hardware, starting the command. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_qc_issue(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - /* Make sure only one non-NCQ command is outstanding. The - * check is skipped for old EH because it reuses active qc to - * request ATAPI sense. - */ - WARN_ON(ap->ops->error_handler && ata_tag_valid(ap->active_tag)); - - if (qc->tf.protocol == ATA_PROT_NCQ) { - WARN_ON(ap->sactive & (1 << qc->tag)); - ap->sactive |= 1 << qc->tag; - } else { - WARN_ON(ap->sactive); - ap->active_tag = qc->tag; - } - - qc->flags |= ATA_QCFLAG_ACTIVE; - ap->qc_active |= 1 << qc->tag; - - if (ata_should_dma_map(qc)) { - if (qc->flags & ATA_QCFLAG_SG) { - if (ata_sg_setup(qc)) - goto sg_err; - } else if (qc->flags & ATA_QCFLAG_SINGLE) { - if (ata_sg_setup_one(qc)) - goto sg_err; - } - } else { - qc->flags &= ~ATA_QCFLAG_DMAMAP; - } - - ap->ops->qc_prep(qc); - - qc->err_mask |= ap->ops->qc_issue(qc); - if (unlikely(qc->err_mask)) - goto err; - return; - -sg_err: - qc->flags &= ~ATA_QCFLAG_DMAMAP; - qc->err_mask |= AC_ERR_SYSTEM; -err: - ata_qc_complete(qc); -} - -/** - * ata_qc_issue_prot - issue taskfile to device in proto-dependent manner - * @qc: command to issue to device - * - * Using various libata functions and hooks, this function - * starts an ATA command. ATA commands are grouped into - * classes called "protocols", and issuing each type of protocol - * is slightly different. - * - * May be used as the qc_issue() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Zero on success, AC_ERR_* mask on failure - */ - -unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - /* Use polling pio if the LLD doesn't handle - * interrupt driven pio and atapi CDB interrupt. - */ - if (ap->flags & ATA_FLAG_PIO_POLLING) { - switch (qc->tf.protocol) { - case ATA_PROT_PIO: - case ATA_PROT_ATAPI: - case ATA_PROT_ATAPI_NODATA: - qc->tf.flags |= ATA_TFLAG_POLLING; - break; - case ATA_PROT_ATAPI_DMA: - if (qc->dev->flags & ATA_DFLAG_CDB_INTR) - /* see ata_dma_blacklisted() */ - BUG(); - break; - default: - break; - } - } - - /* select the device */ - ata_dev_select(ap, qc->dev->devno, 1, 0); - - /* start the command */ - switch (qc->tf.protocol) { - case ATA_PROT_NODATA: - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_qc_set_polling(qc); - - ata_tf_to_host(ap, &qc->tf); - ap->hsm_task_state = HSM_ST_LAST; - - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_port_queue_task(ap, ata_pio_task, qc, 0); - - break; - - case ATA_PROT_DMA: - WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); - - ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ - ap->ops->bmdma_setup(qc); /* set up bmdma */ - ap->ops->bmdma_start(qc); /* initiate bmdma */ - ap->hsm_task_state = HSM_ST_LAST; - break; - - case ATA_PROT_PIO: - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_qc_set_polling(qc); - - ata_tf_to_host(ap, &qc->tf); - - if (qc->tf.flags & ATA_TFLAG_WRITE) { - /* PIO data out protocol */ - ap->hsm_task_state = HSM_ST_FIRST; - ata_port_queue_task(ap, ata_pio_task, qc, 0); - - /* always send first data block using - * the ata_pio_task() codepath. - */ - } else { - /* PIO data in protocol */ - ap->hsm_task_state = HSM_ST; - - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_port_queue_task(ap, ata_pio_task, qc, 0); - - /* if polling, ata_pio_task() handles the rest. - * otherwise, interrupt handler takes over from here. - */ - } - - break; - - case ATA_PROT_ATAPI: - case ATA_PROT_ATAPI_NODATA: - if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_qc_set_polling(qc); - - ata_tf_to_host(ap, &qc->tf); - - ap->hsm_task_state = HSM_ST_FIRST; - - /* send cdb by polling if no cdb interrupt */ - if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || - (qc->tf.flags & ATA_TFLAG_POLLING)) - ata_port_queue_task(ap, ata_pio_task, qc, 0); - break; - - case ATA_PROT_ATAPI_DMA: - WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); - - ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ - ap->ops->bmdma_setup(qc); /* set up bmdma */ - ap->hsm_task_state = HSM_ST_FIRST; - - /* send cdb by polling if no cdb interrupt */ - if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - ata_port_queue_task(ap, ata_pio_task, qc, 0); - break; - - default: - WARN_ON(1); - return AC_ERR_SYSTEM; - } - - return 0; -} - -/** - * ata_host_intr - Handle host interrupt for given (port, task) - * @ap: Port on which interrupt arrived (possibly...) - * @qc: Taskfile currently active in engine - * - * Handle host interrupt for given queued command. Currently, - * only DMA interrupts are handled. All other commands are - * handled via polling with interrupts disabled (nIEN bit). - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * One if interrupt was handled, zero if not (shared irq). - */ - -inline unsigned int ata_host_intr (struct ata_port *ap, - struct ata_queued_cmd *qc) -{ - u8 status, host_stat = 0; - - VPRINTK("ata%u: protocol %d task_state %d\n", - ap->id, qc->tf.protocol, ap->hsm_task_state); - - /* Check whether we are expecting interrupt in this state */ - switch (ap->hsm_task_state) { - case HSM_ST_FIRST: - /* Some pre-ATAPI-4 devices assert INTRQ - * at this state when ready to receive CDB. - */ - - /* Check the ATA_DFLAG_CDB_INTR flag is enough here. - * The flag was turned on only for atapi devices. - * No need to check is_atapi_taskfile(&qc->tf) again. - */ - if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - goto idle_irq; - break; - case HSM_ST_LAST: - if (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_DMA) { - /* check status of DMA engine */ - host_stat = ap->ops->bmdma_status(ap); - VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat); - - /* if it's not our irq... */ - if (!(host_stat & ATA_DMA_INTR)) - goto idle_irq; - - /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(qc); - - if (unlikely(host_stat & ATA_DMA_ERR)) { - /* error when transfering data to/from memory */ - qc->err_mask |= AC_ERR_HOST_BUS; - ap->hsm_task_state = HSM_ST_ERR; - } - } - break; - case HSM_ST: - break; - default: - goto idle_irq; - } - - /* check altstatus */ - status = ata_altstatus(ap); - if (status & ATA_BUSY) - goto idle_irq; - - /* check main status, clearing INTRQ */ - status = ata_chk_status(ap); - if (unlikely(status & ATA_BUSY)) - goto idle_irq; - - /* ack bmdma irq events */ - ap->ops->irq_clear(ap); - - ata_hsm_move(ap, qc, status, 0); - return 1; /* irq handled */ - -idle_irq: - ap->stats.idle_irq++; - -#ifdef ATA_IRQ_TRAP - if ((ap->stats.idle_irq % 1000) == 0) { - ata_irq_ack(ap, 0); /* debug trap */ - ata_port_printk(ap, KERN_WARNING, "irq trap\n"); - return 1; - } -#endif - return 0; /* irq not handled */ -} - -/** - * ata_interrupt - Default ATA host interrupt handler - * @irq: irq line (unused) - * @dev_instance: pointer to our ata_host_set information structure - * @regs: unused - * - * Default interrupt handler for PCI IDE devices. Calls - * ata_host_intr() for each port that is not disabled. - * - * LOCKING: - * Obtains host_set lock during operation. - * - * RETURNS: - * IRQ_NONE or IRQ_HANDLED. - */ - -irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - unsigned int i; - unsigned int handled = 0; - unsigned long flags; - - /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */ - spin_lock_irqsave(&host_set->lock, flags); - - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap; - - ap = host_set->ports[i]; - if (ap && - !(ap->flags & ATA_FLAG_DISABLED)) { - struct ata_queued_cmd *qc; - - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) && - (qc->flags & ATA_QCFLAG_ACTIVE)) - handled |= ata_host_intr(ap, qc); - } - } - - spin_unlock_irqrestore(&host_set->lock, flags); - - return IRQ_RETVAL(handled); -} - -/** - * sata_scr_valid - test whether SCRs are accessible - * @ap: ATA port to test SCR accessibility for - * - * Test whether SCRs are accessible for @ap. - * - * LOCKING: - * None. - * - * RETURNS: - * 1 if SCRs are accessible, 0 otherwise. - */ -int sata_scr_valid(struct ata_port *ap) -{ - return ap->cbl == ATA_CBL_SATA && ap->ops->scr_read; -} - -/** - * sata_scr_read - read SCR register of the specified port - * @ap: ATA port to read SCR for - * @reg: SCR to read - * @val: Place to store read value - * - * Read SCR register @reg of @ap into *@val. This function is - * guaranteed to succeed if the cable type of the port is SATA - * and the port implements ->scr_read. - * - * LOCKING: - * None. - * - * RETURNS: - * 0 on success, negative errno on failure. - */ -int sata_scr_read(struct ata_port *ap, int reg, u32 *val) -{ - if (sata_scr_valid(ap)) { - *val = ap->ops->scr_read(ap, reg); - return 0; - } - return -EOPNOTSUPP; -} - -/** - * sata_scr_write - write SCR register of the specified port - * @ap: ATA port to write SCR for - * @reg: SCR to write - * @val: value to write - * - * Write @val to SCR register @reg of @ap. This function is - * guaranteed to succeed if the cable type of the port is SATA - * and the port implements ->scr_read. - * - * LOCKING: - * None. - * - * RETURNS: - * 0 on success, negative errno on failure. - */ -int sata_scr_write(struct ata_port *ap, int reg, u32 val) -{ - if (sata_scr_valid(ap)) { - ap->ops->scr_write(ap, reg, val); - return 0; - } - return -EOPNOTSUPP; -} - -/** - * sata_scr_write_flush - write SCR register of the specified port and flush - * @ap: ATA port to write SCR for - * @reg: SCR to write - * @val: value to write - * - * This function is identical to sata_scr_write() except that this - * function performs flush after writing to the register. - * - * LOCKING: - * None. - * - * RETURNS: - * 0 on success, negative errno on failure. - */ -int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val) -{ - if (sata_scr_valid(ap)) { - ap->ops->scr_write(ap, reg, val); - ap->ops->scr_read(ap, reg); - return 0; - } - return -EOPNOTSUPP; -} - -/** - * ata_port_online - test whether the given port is online - * @ap: ATA port to test - * - * Test whether @ap is online. Note that this function returns 0 - * if online status of @ap cannot be obtained, so - * ata_port_online(ap) != !ata_port_offline(ap). - * - * LOCKING: - * None. - * - * RETURNS: - * 1 if the port online status is available and online. - */ -int ata_port_online(struct ata_port *ap) -{ - u32 sstatus; - - if (!sata_scr_read(ap, SCR_STATUS, &sstatus) && (sstatus & 0xf) == 0x3) - return 1; - return 0; -} - -/** - * ata_port_offline - test whether the given port is offline - * @ap: ATA port to test - * - * Test whether @ap is offline. Note that this function returns - * 0 if offline status of @ap cannot be obtained, so - * ata_port_online(ap) != !ata_port_offline(ap). - * - * LOCKING: - * None. - * - * RETURNS: - * 1 if the port offline status is available and offline. - */ -int ata_port_offline(struct ata_port *ap) -{ - u32 sstatus; - - if (!sata_scr_read(ap, SCR_STATUS, &sstatus) && (sstatus & 0xf) != 0x3) - return 1; - return 0; -} - -/* - * Execute a 'simple' command, that only consists of the opcode 'cmd' itself, - * without filling any other registers - */ -static int ata_do_simple_cmd(struct ata_device *dev, u8 cmd) -{ - struct ata_taskfile tf; - int err; - - ata_tf_init(dev, &tf); - - tf.command = cmd; - tf.flags |= ATA_TFLAG_DEVICE; - tf.protocol = ATA_PROT_NODATA; - - err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); - if (err) - ata_dev_printk(dev, KERN_ERR, "%s: ata command failed: %d\n", - __FUNCTION__, err); - - return err; -} - -static int ata_flush_cache(struct ata_device *dev) -{ - u8 cmd; - - if (!ata_try_flush_cache(dev)) - return 0; - - if (ata_id_has_flush_ext(dev->id)) - cmd = ATA_CMD_FLUSH_EXT; - else - cmd = ATA_CMD_FLUSH; - - return ata_do_simple_cmd(dev, cmd); -} - -static int ata_standby_drive(struct ata_device *dev) -{ - return ata_do_simple_cmd(dev, ATA_CMD_STANDBYNOW1); -} - -static int ata_start_drive(struct ata_device *dev) -{ - return ata_do_simple_cmd(dev, ATA_CMD_IDLEIMMEDIATE); -} - -/** - * ata_device_resume - wakeup a previously suspended devices - * @dev: the device to resume - * - * Kick the drive back into action, by sending it an idle immediate - * command and making sure its transfer mode matches between drive - * and host. - * - */ -int ata_device_resume(struct ata_device *dev) -{ - struct ata_port *ap = dev->ap; - - if (ap->flags & ATA_FLAG_SUSPENDED) { - struct ata_device *failed_dev; - - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); - ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 200000); - - ap->flags &= ~ATA_FLAG_SUSPENDED; - while (ata_set_mode(ap, &failed_dev)) - ata_dev_disable(failed_dev); - } - if (!ata_dev_enabled(dev)) - return 0; - if (dev->class == ATA_DEV_ATA) - ata_start_drive(dev); - - return 0; -} - -/** - * ata_device_suspend - prepare a device for suspend - * @dev: the device to suspend - * @state: target power management state - * - * Flush the cache on the drive, if appropriate, then issue a - * standbynow command. - */ -int ata_device_suspend(struct ata_device *dev, pm_message_t state) -{ - struct ata_port *ap = dev->ap; - - if (!ata_dev_enabled(dev)) - return 0; - if (dev->class == ATA_DEV_ATA) - ata_flush_cache(dev); - - if (state.event != PM_EVENT_FREEZE) - ata_standby_drive(dev); - ap->flags |= ATA_FLAG_SUSPENDED; - return 0; -} - -/** - * ata_port_start - Set port up for dma. - * @ap: Port to initialize - * - * Called just after data structures for each port are - * initialized. Allocates space for PRD table. - * - * May be used as the port_start() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ - -int ata_port_start (struct ata_port *ap) -{ - struct device *dev = ap->dev; - int rc; - - ap->prd = dma_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma, GFP_KERNEL); - if (!ap->prd) - return -ENOMEM; - - rc = ata_pad_alloc(ap, dev); - if (rc) { - dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma); - return rc; - } - - DPRINTK("prd alloc, virt %p, dma %llx\n", ap->prd, (unsigned long long) ap->prd_dma); - - return 0; -} - - -/** - * ata_port_stop - Undo ata_port_start() - * @ap: Port to shut down - * - * Frees the PRD table. - * - * May be used as the port_stop() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ - -void ata_port_stop (struct ata_port *ap) -{ - struct device *dev = ap->dev; - - dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma); - ata_pad_free(ap, dev); -} - -void ata_host_stop (struct ata_host_set *host_set) -{ - if (host_set->mmio_base) - iounmap(host_set->mmio_base); -} - - -/** - * ata_host_remove - Unregister SCSI host structure with upper layers - * @ap: Port to unregister - * @do_unregister: 1 if we fully unregister, 0 to just stop the port - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) -{ - struct Scsi_Host *sh = ap->host; - - DPRINTK("ENTER\n"); - - if (do_unregister) - scsi_remove_host(sh); - - ap->ops->port_stop(ap); -} - -/** - * ata_dev_init - Initialize an ata_device structure - * @dev: Device structure to initialize - * - * Initialize @dev in preparation for probing. - * - * LOCKING: - * Inherited from caller. - */ -void ata_dev_init(struct ata_device *dev) -{ - struct ata_port *ap = dev->ap; - unsigned long flags; - - /* SATA spd limit is bound to the first device */ - ap->sata_spd_limit = ap->hw_sata_spd_limit; - - /* High bits of dev->flags are used to record warm plug - * requests which occur asynchronously. Synchronize using - * host_set lock. - */ - spin_lock_irqsave(ap->lock, flags); - dev->flags &= ~ATA_DFLAG_INIT_MASK; - spin_unlock_irqrestore(ap->lock, flags); - - memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0, - sizeof(*dev) - ATA_DEVICE_CLEAR_OFFSET); - dev->pio_mask = UINT_MAX; - dev->mwdma_mask = UINT_MAX; - dev->udma_mask = UINT_MAX; -} - -/** - * ata_host_init - Initialize an ata_port structure - * @ap: Structure to initialize - * @host: associated SCSI mid-layer structure - * @host_set: Collection of hosts to which @ap belongs - * @ent: Probe information provided by low-level driver - * @port_no: Port number associated with this ata_port - * - * Initialize a new ata_port structure, and its associated - * scsi_host. - * - * LOCKING: - * Inherited from caller. - */ -static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, - struct ata_host_set *host_set, - const struct ata_probe_ent *ent, unsigned int port_no) -{ - unsigned int i; - - host->max_id = 16; - host->max_lun = 1; - host->max_channel = 1; - host->unique_id = ata_unique_id++; - host->max_cmd_len = 12; - - ap->lock = &host_set->lock; - ap->flags = ATA_FLAG_DISABLED; - ap->id = host->unique_id; - ap->host = host; - ap->ctl = ATA_DEVCTL_OBS; - ap->host_set = host_set; - ap->dev = ent->dev; - ap->port_no = port_no; - ap->hard_port_no = - ent->legacy_mode ? ent->hard_port_no : port_no; - ap->pio_mask = ent->pio_mask; - ap->mwdma_mask = ent->mwdma_mask; - ap->udma_mask = ent->udma_mask; - ap->flags |= ent->host_flags; - ap->ops = ent->port_ops; - ap->hw_sata_spd_limit = UINT_MAX; - ap->active_tag = ATA_TAG_POISON; - ap->last_ctl = 0xFF; - -#if defined(ATA_VERBOSE_DEBUG) - /* turn on all debugging levels */ - ap->msg_enable = 0x00FF; -#elif defined(ATA_DEBUG) - ap->msg_enable = ATA_MSG_DRV | ATA_MSG_INFO | ATA_MSG_CTL | ATA_MSG_WARN | ATA_MSG_ERR; -#else - ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN; -#endif - - INIT_WORK(&ap->port_task, NULL, NULL); - INIT_WORK(&ap->hotplug_task, ata_scsi_hotplug, ap); - INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan, ap); - INIT_LIST_HEAD(&ap->eh_done_q); - init_waitqueue_head(&ap->eh_wait_q); - - /* set cable type */ - ap->cbl = ATA_CBL_NONE; - if (ap->flags & ATA_FLAG_SATA) - ap->cbl = ATA_CBL_SATA; - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; - dev->ap = ap; - dev->devno = i; - ata_dev_init(dev); - } - -#ifdef ATA_IRQ_TRAP - ap->stats.unhandled_irq = 1; - ap->stats.idle_irq = 1; -#endif - - memcpy(&ap->ioaddr, &ent->port[port_no], sizeof(struct ata_ioports)); -} - -/** - * ata_host_add - Attach low-level ATA driver to system - * @ent: Information provided by low-level driver - * @host_set: Collections of ports to which we add - * @port_no: Port number associated with this host - * - * Attach low-level ATA driver to system. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * New ata_port on success, for NULL on error. - */ - -static struct ata_port * ata_host_add(const struct ata_probe_ent *ent, - struct ata_host_set *host_set, - unsigned int port_no) -{ - struct Scsi_Host *host; - struct ata_port *ap; - int rc; - - DPRINTK("ENTER\n"); - - if (!ent->port_ops->error_handler && - !(ent->host_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) { - printk(KERN_ERR "ata%u: no reset mechanism available\n", - port_no); - return NULL; - } - - host = scsi_host_alloc(ent->sht, sizeof(struct ata_port)); - if (!host) - return NULL; - - host->transportt = &ata_scsi_transport_template; - - ap = ata_shost_to_port(host); - - ata_host_init(ap, host, host_set, ent, port_no); - - rc = ap->ops->port_start(ap); - if (rc) - goto err_out; - - return ap; - -err_out: - scsi_host_put(host); - return NULL; -} - -/** - * ata_device_add - Register hardware device with ATA and SCSI layers - * @ent: Probe information describing hardware device to be registered - * - * This function processes the information provided in the probe - * information struct @ent, allocates the necessary ATA and SCSI - * host information structures, initializes them, and registers - * everything with requisite kernel subsystems. - * - * This function requests irqs, probes the ATA bus, and probes - * the SCSI bus. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * Number of ports registered. Zero on error (no ports registered). - */ -int ata_device_add(const struct ata_probe_ent *ent) -{ - unsigned int count = 0, i; - struct device *dev = ent->dev; - struct ata_host_set *host_set; - int rc; - - DPRINTK("ENTER\n"); - /* alloc a container for our list of ATA ports (buses) */ - host_set = kzalloc(sizeof(struct ata_host_set) + - (ent->n_ports * sizeof(void *)), GFP_KERNEL); - if (!host_set) - return 0; - spin_lock_init(&host_set->lock); - - host_set->dev = dev; - host_set->n_ports = ent->n_ports; - host_set->irq = ent->irq; - host_set->mmio_base = ent->mmio_base; - host_set->private_data = ent->private_data; - host_set->ops = ent->port_ops; - host_set->flags = ent->host_set_flags; - - /* register each port bound to this device */ - for (i = 0; i < ent->n_ports; i++) { - struct ata_port *ap; - unsigned long xfer_mode_mask; - - ap = ata_host_add(ent, host_set, i); - if (!ap) - goto err_out; - - host_set->ports[i] = ap; - xfer_mode_mask =(ap->udma_mask << ATA_SHIFT_UDMA) | - (ap->mwdma_mask << ATA_SHIFT_MWDMA) | - (ap->pio_mask << ATA_SHIFT_PIO); - - /* print per-port info to dmesg */ - ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%lX " - "ctl 0x%lX bmdma 0x%lX irq %lu\n", - ap->flags & ATA_FLAG_SATA ? 'S' : 'P', - ata_mode_string(xfer_mode_mask), - ap->ioaddr.cmd_addr, - ap->ioaddr.ctl_addr, - ap->ioaddr.bmdma_addr, - ent->irq); - - ata_chk_status(ap); - host_set->ops->irq_clear(ap); - ata_eh_freeze_port(ap); /* freeze port before requesting IRQ */ - count++; - } - - if (!count) - goto err_free_ret; - - /* obtain irq, that is shared between channels */ - rc = request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags, - DRV_NAME, host_set); - if (rc) { - dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n", - ent->irq, rc); - goto err_out; - } - - /* perform each probe synchronously */ - DPRINTK("probe begin\n"); - for (i = 0; i < count; i++) { - struct ata_port *ap; - u32 scontrol; - int rc; - - ap = host_set->ports[i]; - - /* init sata_spd_limit to the current value */ - if (sata_scr_read(ap, SCR_CONTROL, &scontrol) == 0) { - int spd = (scontrol >> 4) & 0xf; - ap->hw_sata_spd_limit &= (1 << spd) - 1; - } - ap->sata_spd_limit = ap->hw_sata_spd_limit; - - rc = scsi_add_host(ap->host, dev); - if (rc) { - ata_port_printk(ap, KERN_ERR, "scsi_add_host failed\n"); - /* FIXME: do something useful here */ - /* FIXME: handle unconditional calls to - * scsi_scan_host and ata_host_remove, below, - * at the very least - */ - } - - if (ap->ops->error_handler) { - unsigned long flags; - - ata_port_probe(ap); - - /* kick EH for boot probing */ - spin_lock_irqsave(ap->lock, flags); - - ap->eh_info.probe_mask = (1 << ATA_MAX_DEVICES) - 1; - ap->eh_info.action |= ATA_EH_SOFTRESET; - - ap->flags |= ATA_FLAG_LOADING; - ata_port_schedule_eh(ap); - - spin_unlock_irqrestore(ap->lock, flags); - - /* wait for EH to finish */ - ata_port_wait_eh(ap); - } else { - DPRINTK("ata%u: bus probe begin\n", ap->id); - rc = ata_bus_probe(ap); - DPRINTK("ata%u: bus probe end\n", ap->id); - - if (rc) { - /* FIXME: do something useful here? - * Current libata behavior will - * tear down everything when - * the module is removed - * or the h/w is unplugged. - */ - } - } - } - - /* probes are done, now scan each port's disk(s) */ - DPRINTK("host probe begin\n"); - for (i = 0; i < count; i++) { - struct ata_port *ap = host_set->ports[i]; - - ata_scsi_scan_host(ap); - } - - dev_set_drvdata(dev, host_set); - - VPRINTK("EXIT, returning %u\n", ent->n_ports); - return ent->n_ports; /* success */ - -err_out: - for (i = 0; i < count; i++) { - ata_host_remove(host_set->ports[i], 1); - scsi_host_put(host_set->ports[i]->host); - } -err_free_ret: - kfree(host_set); - VPRINTK("EXIT, returning 0\n"); - return 0; -} - -/** - * ata_port_detach - Detach ATA port in prepration of device removal - * @ap: ATA port to be detached - * - * Detach all ATA devices and the associated SCSI devices of @ap; - * then, remove the associated SCSI host. @ap is guaranteed to - * be quiescent on return from this function. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -void ata_port_detach(struct ata_port *ap) -{ - unsigned long flags; - int i; - - if (!ap->ops->error_handler) - return; - - /* tell EH we're leaving & flush EH */ - spin_lock_irqsave(ap->lock, flags); - ap->flags |= ATA_FLAG_UNLOADING; - spin_unlock_irqrestore(ap->lock, flags); - - ata_port_wait_eh(ap); - - /* EH is now guaranteed to see UNLOADING, so no new device - * will be attached. Disable all existing devices. - */ - spin_lock_irqsave(ap->lock, flags); - - for (i = 0; i < ATA_MAX_DEVICES; i++) - ata_dev_disable(&ap->device[i]); - - spin_unlock_irqrestore(ap->lock, flags); - - /* Final freeze & EH. All in-flight commands are aborted. EH - * will be skipped and retrials will be terminated with bad - * target. - */ - spin_lock_irqsave(ap->lock, flags); - ata_port_freeze(ap); /* won't be thawed */ - spin_unlock_irqrestore(ap->lock, flags); - - ata_port_wait_eh(ap); - - /* Flush hotplug task. The sequence is similar to - * ata_port_flush_task(). - */ - flush_workqueue(ata_aux_wq); - cancel_delayed_work(&ap->hotplug_task); - flush_workqueue(ata_aux_wq); - - /* remove the associated SCSI host */ - scsi_remove_host(ap->host); -} - -/** - * ata_host_set_remove - PCI layer callback for device removal - * @host_set: ATA host set that was removed - * - * Unregister all objects associated with this host set. Free those - * objects. - * - * LOCKING: - * Inherited from calling layer (may sleep). - */ - -void ata_host_set_remove(struct ata_host_set *host_set) -{ - unsigned int i; - - for (i = 0; i < host_set->n_ports; i++) - ata_port_detach(host_set->ports[i]); - - free_irq(host_set->irq, host_set); - - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; - - ata_scsi_release(ap->host); - - if ((ap->flags & ATA_FLAG_NO_LEGACY) == 0) { - struct ata_ioports *ioaddr = &ap->ioaddr; - - if (ioaddr->cmd_addr == 0x1f0) - release_region(0x1f0, 8); - else if (ioaddr->cmd_addr == 0x170) - release_region(0x170, 8); - } - - scsi_host_put(ap->host); - } - - if (host_set->ops->host_stop) - host_set->ops->host_stop(host_set); - - kfree(host_set); -} - -/** - * ata_scsi_release - SCSI layer callback hook for host unload - * @host: libata host to be unloaded - * - * Performs all duties necessary to shut down a libata port... - * Kill port kthread, disable port, and release resources. - * - * LOCKING: - * Inherited from SCSI layer. - * - * RETURNS: - * One. - */ - -int ata_scsi_release(struct Scsi_Host *host) -{ - struct ata_port *ap = ata_shost_to_port(host); - - DPRINTK("ENTER\n"); - - ap->ops->port_disable(ap); - ata_host_remove(ap, 0); - - DPRINTK("EXIT\n"); - return 1; -} - -/** - * ata_std_ports - initialize ioaddr with standard port offsets. - * @ioaddr: IO address structure to be initialized - * - * Utility function which initializes data_addr, error_addr, - * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr, - * device_addr, status_addr, and command_addr to standard offsets - * relative to cmd_addr. - * - * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr. - */ - -void ata_std_ports(struct ata_ioports *ioaddr) -{ - ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA; - ioaddr->error_addr = ioaddr->cmd_addr + ATA_REG_ERR; - ioaddr->feature_addr = ioaddr->cmd_addr + ATA_REG_FEATURE; - ioaddr->nsect_addr = ioaddr->cmd_addr + ATA_REG_NSECT; - ioaddr->lbal_addr = ioaddr->cmd_addr + ATA_REG_LBAL; - ioaddr->lbam_addr = ioaddr->cmd_addr + ATA_REG_LBAM; - ioaddr->lbah_addr = ioaddr->cmd_addr + ATA_REG_LBAH; - ioaddr->device_addr = ioaddr->cmd_addr + ATA_REG_DEVICE; - ioaddr->status_addr = ioaddr->cmd_addr + ATA_REG_STATUS; - ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD; -} - - -#ifdef CONFIG_PCI - -void ata_pci_host_stop (struct ata_host_set *host_set) -{ - struct pci_dev *pdev = to_pci_dev(host_set->dev); - - pci_iounmap(pdev, host_set->mmio_base); -} - -/** - * ata_pci_remove_one - PCI layer callback for device removal - * @pdev: PCI device that was removed - * - * PCI layer indicates to libata via this hook that - * hot-unplug or module unload event has occurred. - * Handle this by unregistering all objects associated - * with this PCI device. Free those objects. Then finally - * release PCI resources and disable device. - * - * LOCKING: - * Inherited from PCI layer (may sleep). - */ - -void ata_pci_remove_one (struct pci_dev *pdev) -{ - struct device *dev = pci_dev_to_dev(pdev); - struct ata_host_set *host_set = dev_get_drvdata(dev); - struct ata_host_set *host_set2 = host_set->next; - - ata_host_set_remove(host_set); - if (host_set2) - ata_host_set_remove(host_set2); - - pci_release_regions(pdev); - pci_disable_device(pdev); - dev_set_drvdata(dev, NULL); -} - -/* move to PCI subsystem */ -int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits) -{ - unsigned long tmp = 0; - - switch (bits->width) { - case 1: { - u8 tmp8 = 0; - pci_read_config_byte(pdev, bits->reg, &tmp8); - tmp = tmp8; - break; - } - case 2: { - u16 tmp16 = 0; - pci_read_config_word(pdev, bits->reg, &tmp16); - tmp = tmp16; - break; - } - case 4: { - u32 tmp32 = 0; - pci_read_config_dword(pdev, bits->reg, &tmp32); - tmp = tmp32; - break; - } - - default: - return -EINVAL; - } - - tmp &= bits->mask; - - return (tmp == bits->val) ? 1 : 0; -} - -int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state) -{ - pci_save_state(pdev); - pci_disable_device(pdev); - pci_set_power_state(pdev, PCI_D3hot); - return 0; -} - -int ata_pci_device_resume(struct pci_dev *pdev) -{ - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - pci_enable_device(pdev); - pci_set_master(pdev); - return 0; -} -#endif /* CONFIG_PCI */ - - -static int __init ata_init(void) -{ - ata_wq = create_workqueue("ata"); - if (!ata_wq) - return -ENOMEM; - - ata_aux_wq = create_singlethread_workqueue("ata_aux"); - if (!ata_aux_wq) { - destroy_workqueue(ata_wq); - return -ENOMEM; - } - - printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n"); - return 0; -} - -static void __exit ata_exit(void) -{ - destroy_workqueue(ata_wq); - destroy_workqueue(ata_aux_wq); -} - -module_init(ata_init); -module_exit(ata_exit); - -static unsigned long ratelimit_time; -static spinlock_t ata_ratelimit_lock = SPIN_LOCK_UNLOCKED; - -int ata_ratelimit(void) -{ - int rc; - unsigned long flags; - - spin_lock_irqsave(&ata_ratelimit_lock, flags); - - if (time_after(jiffies, ratelimit_time)) { - rc = 1; - ratelimit_time = jiffies + (HZ/5); - } else - rc = 0; - - spin_unlock_irqrestore(&ata_ratelimit_lock, flags); - - return rc; -} - -/** - * ata_wait_register - wait until register value changes - * @reg: IO-mapped register - * @mask: Mask to apply to read register value - * @val: Wait condition - * @interval_msec: polling interval in milliseconds - * @timeout_msec: timeout in milliseconds - * - * Waiting for some bits of register to change is a common - * operation for ATA controllers. This function reads 32bit LE - * IO-mapped register @reg and tests for the following condition. - * - * (*@reg & mask) != val - * - * If the condition is met, it returns; otherwise, the process is - * repeated after @interval_msec until timeout. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * The final register value. - */ -u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, - unsigned long interval_msec, - unsigned long timeout_msec) -{ - unsigned long timeout; - u32 tmp; - - tmp = ioread32(reg); - - /* Calculate timeout _after_ the first read to make sure - * preceding writes reach the controller before starting to - * eat away the timeout. - */ - timeout = jiffies + (timeout_msec * HZ) / 1000; - - while ((tmp & mask) == val && time_before(jiffies, timeout)) { - msleep(interval_msec); - tmp = ioread32(reg); - } - - return tmp; -} - -/* - * libata is essentially a library of internal helper functions for - * low-level ATA host controller drivers. As such, the API/ABI is - * likely to change as new drivers are added and updated. - * Do not depend on ABI/API stability. - */ - -EXPORT_SYMBOL_GPL(sata_deb_timing_boot); -EXPORT_SYMBOL_GPL(sata_deb_timing_eh); -EXPORT_SYMBOL_GPL(sata_deb_timing_before_fsrst); -EXPORT_SYMBOL_GPL(ata_std_bios_param); -EXPORT_SYMBOL_GPL(ata_std_ports); -EXPORT_SYMBOL_GPL(ata_device_add); -EXPORT_SYMBOL_GPL(ata_port_detach); -EXPORT_SYMBOL_GPL(ata_host_set_remove); -EXPORT_SYMBOL_GPL(ata_sg_init); -EXPORT_SYMBOL_GPL(ata_sg_init_one); -EXPORT_SYMBOL_GPL(ata_hsm_move); -EXPORT_SYMBOL_GPL(ata_qc_complete); -EXPORT_SYMBOL_GPL(ata_qc_complete_multiple); -EXPORT_SYMBOL_GPL(ata_qc_issue_prot); -EXPORT_SYMBOL_GPL(ata_tf_load); -EXPORT_SYMBOL_GPL(ata_tf_read); -EXPORT_SYMBOL_GPL(ata_noop_dev_select); -EXPORT_SYMBOL_GPL(ata_std_dev_select); -EXPORT_SYMBOL_GPL(ata_tf_to_fis); -EXPORT_SYMBOL_GPL(ata_tf_from_fis); -EXPORT_SYMBOL_GPL(ata_check_status); -EXPORT_SYMBOL_GPL(ata_altstatus); -EXPORT_SYMBOL_GPL(ata_exec_command); -EXPORT_SYMBOL_GPL(ata_port_start); -EXPORT_SYMBOL_GPL(ata_port_stop); -EXPORT_SYMBOL_GPL(ata_host_stop); -EXPORT_SYMBOL_GPL(ata_interrupt); -EXPORT_SYMBOL_GPL(ata_mmio_data_xfer); -EXPORT_SYMBOL_GPL(ata_pio_data_xfer); -EXPORT_SYMBOL_GPL(ata_pio_data_xfer_noirq); -EXPORT_SYMBOL_GPL(ata_qc_prep); -EXPORT_SYMBOL_GPL(ata_noop_qc_prep); -EXPORT_SYMBOL_GPL(ata_bmdma_setup); -EXPORT_SYMBOL_GPL(ata_bmdma_start); -EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear); -EXPORT_SYMBOL_GPL(ata_bmdma_status); -EXPORT_SYMBOL_GPL(ata_bmdma_stop); -EXPORT_SYMBOL_GPL(ata_bmdma_freeze); -EXPORT_SYMBOL_GPL(ata_bmdma_thaw); -EXPORT_SYMBOL_GPL(ata_bmdma_drive_eh); -EXPORT_SYMBOL_GPL(ata_bmdma_error_handler); -EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd); -EXPORT_SYMBOL_GPL(ata_port_probe); -EXPORT_SYMBOL_GPL(sata_set_spd); -EXPORT_SYMBOL_GPL(sata_phy_debounce); -EXPORT_SYMBOL_GPL(sata_phy_resume); -EXPORT_SYMBOL_GPL(sata_phy_reset); -EXPORT_SYMBOL_GPL(__sata_phy_reset); -EXPORT_SYMBOL_GPL(ata_bus_reset); -EXPORT_SYMBOL_GPL(ata_std_prereset); -EXPORT_SYMBOL_GPL(ata_std_softreset); -EXPORT_SYMBOL_GPL(sata_std_hardreset); -EXPORT_SYMBOL_GPL(ata_std_postreset); -EXPORT_SYMBOL_GPL(ata_dev_revalidate); -EXPORT_SYMBOL_GPL(ata_dev_classify); -EXPORT_SYMBOL_GPL(ata_dev_pair); -EXPORT_SYMBOL_GPL(ata_port_disable); -EXPORT_SYMBOL_GPL(ata_ratelimit); -EXPORT_SYMBOL_GPL(ata_wait_register); -EXPORT_SYMBOL_GPL(ata_busy_sleep); -EXPORT_SYMBOL_GPL(ata_port_queue_task); -EXPORT_SYMBOL_GPL(ata_scsi_ioctl); -EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); -EXPORT_SYMBOL_GPL(ata_scsi_slave_config); -EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy); -EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth); -EXPORT_SYMBOL_GPL(ata_scsi_release); -EXPORT_SYMBOL_GPL(ata_host_intr); -EXPORT_SYMBOL_GPL(sata_scr_valid); -EXPORT_SYMBOL_GPL(sata_scr_read); -EXPORT_SYMBOL_GPL(sata_scr_write); -EXPORT_SYMBOL_GPL(sata_scr_write_flush); -EXPORT_SYMBOL_GPL(ata_port_online); -EXPORT_SYMBOL_GPL(ata_port_offline); -EXPORT_SYMBOL_GPL(ata_id_string); -EXPORT_SYMBOL_GPL(ata_id_c_string); -EXPORT_SYMBOL_GPL(ata_scsi_simulate); - -EXPORT_SYMBOL_GPL(ata_pio_need_iordy); -EXPORT_SYMBOL_GPL(ata_timing_compute); -EXPORT_SYMBOL_GPL(ata_timing_merge); - -#ifdef CONFIG_PCI -EXPORT_SYMBOL_GPL(pci_test_config_bits); -EXPORT_SYMBOL_GPL(ata_pci_host_stop); -EXPORT_SYMBOL_GPL(ata_pci_init_native_mode); -EXPORT_SYMBOL_GPL(ata_pci_init_one); -EXPORT_SYMBOL_GPL(ata_pci_remove_one); -EXPORT_SYMBOL_GPL(ata_pci_device_suspend); -EXPORT_SYMBOL_GPL(ata_pci_device_resume); -EXPORT_SYMBOL_GPL(ata_pci_default_filter); -EXPORT_SYMBOL_GPL(ata_pci_clear_simplex); -#endif /* CONFIG_PCI */ - -EXPORT_SYMBOL_GPL(ata_device_suspend); -EXPORT_SYMBOL_GPL(ata_device_resume); -EXPORT_SYMBOL_GPL(ata_scsi_device_suspend); -EXPORT_SYMBOL_GPL(ata_scsi_device_resume); - -EXPORT_SYMBOL_GPL(ata_eng_timeout); -EXPORT_SYMBOL_GPL(ata_port_schedule_eh); -EXPORT_SYMBOL_GPL(ata_port_abort); -EXPORT_SYMBOL_GPL(ata_port_freeze); -EXPORT_SYMBOL_GPL(ata_eh_freeze_port); -EXPORT_SYMBOL_GPL(ata_eh_thaw_port); -EXPORT_SYMBOL_GPL(ata_eh_qc_complete); -EXPORT_SYMBOL_GPL(ata_eh_qc_retry); -EXPORT_SYMBOL_GPL(ata_do_eh); diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c deleted file mode 100644 index 823385981a7..00000000000 --- a/drivers/scsi/libata-eh.c +++ /dev/null @@ -1,1907 +0,0 @@ -/* - * libata-eh.c - libata error handling - * - * Maintained by: Jeff Garzik <jgarzik@pobox.com> - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2006 Tejun Heo <htejun@gmail.com> - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, - * USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available from http://www.t13.org/ and - * http://www.sata-io.org/ - * - */ - -#include <linux/config.h> -#include <linux/kernel.h> -#include <scsi/scsi.h> -#include <scsi/scsi_host.h> -#include <scsi/scsi_eh.h> -#include <scsi/scsi_device.h> -#include <scsi/scsi_cmnd.h> -#include "scsi_transport_api.h" - -#include <linux/libata.h> - -#include "libata.h" - -static void __ata_port_freeze(struct ata_port *ap); -static void ata_eh_finish(struct ata_port *ap); - -static void ata_ering_record(struct ata_ering *ering, int is_io, - unsigned int err_mask) -{ - struct ata_ering_entry *ent; - - WARN_ON(!err_mask); - - ering->cursor++; - ering->cursor %= ATA_ERING_SIZE; - - ent = &ering->ring[ering->cursor]; - ent->is_io = is_io; - ent->err_mask = err_mask; - ent->timestamp = get_jiffies_64(); -} - -static struct ata_ering_entry * ata_ering_top(struct ata_ering *ering) -{ - struct ata_ering_entry *ent = &ering->ring[ering->cursor]; - if (!ent->err_mask) - return NULL; - return ent; -} - -static int ata_ering_map(struct ata_ering *ering, - int (*map_fn)(struct ata_ering_entry *, void *), - void *arg) -{ - int idx, rc = 0; - struct ata_ering_entry *ent; - - idx = ering->cursor; - do { - ent = &ering->ring[idx]; - if (!ent->err_mask) - break; - rc = map_fn(ent, arg); - if (rc) - break; - idx = (idx - 1 + ATA_ERING_SIZE) % ATA_ERING_SIZE; - } while (idx != ering->cursor); - - return rc; -} - -/** - * ata_scsi_timed_out - SCSI layer time out callback - * @cmd: timed out SCSI command - * - * Handles SCSI layer timeout. We race with normal completion of - * the qc for @cmd. If the qc is already gone, we lose and let - * the scsi command finish (EH_HANDLED). Otherwise, the qc has - * timed out and EH should be invoked. Prevent ata_qc_complete() - * from finishing it by setting EH_SCHEDULED and return - * EH_NOT_HANDLED. - * - * TODO: kill this function once old EH is gone. - * - * LOCKING: - * Called from timer context - * - * RETURNS: - * EH_HANDLED or EH_NOT_HANDLED - */ -enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) -{ - struct Scsi_Host *host = cmd->device->host; - struct ata_port *ap = ata_shost_to_port(host); - unsigned long flags; - struct ata_queued_cmd *qc; - enum scsi_eh_timer_return ret; - - DPRINTK("ENTER\n"); - - if (ap->ops->error_handler) { - ret = EH_NOT_HANDLED; - goto out; - } - - ret = EH_HANDLED; - spin_lock_irqsave(ap->lock, flags); - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc) { - WARN_ON(qc->scsicmd != cmd); - qc->flags |= ATA_QCFLAG_EH_SCHEDULED; - qc->err_mask |= AC_ERR_TIMEOUT; - ret = EH_NOT_HANDLED; - } - spin_unlock_irqrestore(ap->lock, flags); - - out: - DPRINTK("EXIT, ret=%d\n", ret); - return ret; -} - -/** - * ata_scsi_error - SCSI layer error handler callback - * @host: SCSI host on which error occurred - * - * Handles SCSI-layer-thrown error events. - * - * LOCKING: - * Inherited from SCSI layer (none, can sleep) - * - * RETURNS: - * Zero. - */ -void ata_scsi_error(struct Scsi_Host *host) -{ - struct ata_port *ap = ata_shost_to_port(host); - spinlock_t *ap_lock = ap->lock; - int i, repeat_cnt = ATA_EH_MAX_REPEAT; - unsigned long flags; - - DPRINTK("ENTER\n"); - - /* synchronize with port task */ - ata_port_flush_task(ap); - - /* synchronize with host_set lock and sort out timeouts */ - - /* For new EH, all qcs are finished in one of three ways - - * normal completion, error completion, and SCSI timeout. - * Both cmpletions can race against SCSI timeout. When normal - * completion wins, the qc never reaches EH. When error - * completion wins, the qc has ATA_QCFLAG_FAILED set. - * - * When SCSI timeout wins, things are a bit more complex. - * Normal or error completion can occur after the timeout but - * before this point. In such cases, both types of - * completions are honored. A scmd is determined to have - * timed out iff its associated qc is active and not failed. - */ - if (ap->ops->error_handler) { - struct scsi_cmnd *scmd, *tmp; - int nr_timedout = 0; - - spin_lock_irqsave(ap_lock, flags); - - list_for_each_entry_safe(scmd, tmp, &host->eh_cmd_q, eh_entry) { - struct ata_queued_cmd *qc; - - for (i = 0; i < ATA_MAX_QUEUE; i++) { - qc = __ata_qc_from_tag(ap, i); - if (qc->flags & ATA_QCFLAG_ACTIVE && - qc->scsicmd == scmd) - break; - } - - if (i < ATA_MAX_QUEUE) { - /* the scmd has an associated qc */ - if (!(qc->flags & ATA_QCFLAG_FAILED)) { - /* which hasn't failed yet, timeout */ - qc->err_mask |= AC_ERR_TIMEOUT; - qc->flags |= ATA_QCFLAG_FAILED; - nr_timedout++; - } - } else { - /* Normal completion occurred after - * SCSI timeout but before this point. - * Successfully complete it. - */ - scmd->retries = scmd->allowed; - scsi_eh_finish_cmd(scmd, &ap->eh_done_q); - } - } - - /* If we have timed out qcs. They belong to EH from - * this point but the state of the controller is - * unknown. Freeze the port to make sure the IRQ - * handler doesn't diddle with those qcs. This must - * be done atomically w.r.t. setting QCFLAG_FAILED. - */ - if (nr_timedout) - __ata_port_freeze(ap); - - spin_unlock_irqrestore(ap_lock, flags); - } else - spin_unlock_wait(ap_lock); - - repeat: - /* invoke error handler */ - if (ap->ops->error_handler) { - /* fetch & clear EH info */ - spin_lock_irqsave(ap_lock, flags); - - memset(&ap->eh_context, 0, sizeof(ap->eh_context)); - ap->eh_context.i = ap->eh_info; - memset(&ap->eh_info, 0, sizeof(ap->eh_info)); - - ap->flags |= ATA_FLAG_EH_IN_PROGRESS; - ap->flags &= ~ATA_FLAG_EH_PENDING; - - spin_unlock_irqrestore(ap_lock, flags); - - /* invoke EH. if unloading, just finish failed qcs */ - if (!(ap->flags & ATA_FLAG_UNLOADING)) - ap->ops->error_handler(ap); - else - ata_eh_finish(ap); - - /* Exception might have happend after ->error_handler - * recovered the port but before this point. Repeat - * EH in such case. - */ - spin_lock_irqsave(ap_lock, flags); - - if (ap->flags & ATA_FLAG_EH_PENDING) { - if (--repeat_cnt) { - ata_port_printk(ap, KERN_INFO, - "EH pending after completion, " - "repeating EH (cnt=%d)\n", repeat_cnt); - spin_unlock_irqrestore(ap_lock, flags); - goto repeat; - } - ata_port_printk(ap, KERN_ERR, "EH pending after %d " - "tries, giving up\n", ATA_EH_MAX_REPEAT); - } - - /* this run is complete, make sure EH info is clear */ - memset(&ap->eh_info, 0, sizeof(ap->eh_info)); - - /* Clear host_eh_scheduled while holding ap_lock such - * that if exception occurs after this point but - * before EH completion, SCSI midlayer will - * re-initiate EH. - */ - host->host_eh_scheduled = 0; - - spin_unlock_irqrestore(ap_lock, flags); - } else { - WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL); - ap->ops->eng_timeout(ap); - } - - /* finish or retry handled scmd's and clean up */ - WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q)); - - scsi_eh_flush_done_q(&ap->eh_done_q); - - /* clean up */ - spin_lock_irqsave(ap_lock, flags); - - if (ap->flags & ATA_FLAG_LOADING) { - ap->flags &= ~ATA_FLAG_LOADING; - } else { - if (ap->flags & ATA_FLAG_SCSI_HOTPLUG) - queue_work(ata_aux_wq, &ap->hotplug_task); - if (ap->flags & ATA_FLAG_RECOVERED) - ata_port_printk(ap, KERN_INFO, "EH complete\n"); - } - - ap->flags &= ~(ATA_FLAG_SCSI_HOTPLUG | ATA_FLAG_RECOVERED); - - /* tell wait_eh that we're done */ - ap->flags &= ~ATA_FLAG_EH_IN_PROGRESS; - wake_up_all(&ap->eh_wait_q); - - spin_unlock_irqrestore(ap_lock, flags); - - DPRINTK("EXIT\n"); -} - -/** - * ata_port_wait_eh - Wait for the currently pending EH to complete - * @ap: Port to wait EH for - * - * Wait until the currently pending EH is complete. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -void ata_port_wait_eh(struct ata_port *ap) -{ - unsigned long flags; - DEFINE_WAIT(wait); - - retry: - spin_lock_irqsave(ap->lock, flags); - - while (ap->flags & (ATA_FLAG_EH_PENDING | ATA_FLAG_EH_IN_PROGRESS)) { - prepare_to_wait(&ap->eh_wait_q, &wait, TASK_UNINTERRUPTIBLE); - spin_unlock_irqrestore(ap->lock, flags); - schedule(); - spin_lock_irqsave(ap->lock, flags); - } - finish_wait(&ap->eh_wait_q, &wait); - - spin_unlock_irqrestore(ap->lock, flags); - - /* make sure SCSI EH is complete */ - if (scsi_host_in_recovery(ap->host)) { - msleep(10); - goto retry; - } -} - -/** - * ata_qc_timeout - Handle timeout of queued command - * @qc: Command that timed out - * - * Some part of the kernel (currently, only the SCSI layer) - * has noticed that the active command on port @ap has not - * completed after a specified length of time. Handle this - * condition by disabling DMA (if necessary) and completing - * transactions, with error if necessary. - * - * This also handles the case of the "lost interrupt", where - * for some reason (possibly hardware bug, possibly driver bug) - * an interrupt was not delivered to the driver, even though the - * transaction completed successfully. - * - * TODO: kill this function once old EH is gone. - * - * LOCKING: - * Inherited from SCSI layer (none, can sleep) - */ -static void ata_qc_timeout(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - u8 host_stat = 0, drv_stat; - unsigned long flags; - - DPRINTK("ENTER\n"); - - ap->hsm_task_state = HSM_ST_IDLE; - - spin_lock_irqsave(ap->lock, flags); - - switch (qc->tf.protocol) { - - case ATA_PROT_DMA: - case ATA_PROT_ATAPI_DMA: - host_stat = ap->ops->bmdma_status(ap); - - /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(qc); - - /* fall through */ - - default: - ata_altstatus(ap); - drv_stat = ata_chk_status(ap); - - /* ack bmdma irq events */ - ap->ops->irq_clear(ap); - - ata_dev_printk(qc->dev, KERN_ERR, "command 0x%x timeout, " - "stat 0x%x host_stat 0x%x\n", - qc->tf.command, drv_stat, host_stat); - - /* complete taskfile transaction */ - qc->err_mask |= AC_ERR_TIMEOUT; - break; - } - - spin_unlock_irqrestore(ap->lock, flags); - - ata_eh_qc_complete(qc); - - DPRINTK("EXIT\n"); -} - -/** - * ata_eng_timeout - Handle timeout of queued command - * @ap: Port on which timed-out command is active - * - * Some part of the kernel (currently, only the SCSI layer) - * has noticed that the active command on port @ap has not - * completed after a specified length of time. Handle this - * condition by disabling DMA (if necessary) and completing - * transactions, with error if necessary. - * - * This also handles the case of the "lost interrupt", where - * for some reason (possibly hardware bug, possibly driver bug) - * an interrupt was not delivered to the driver, even though the - * transaction completed successfully. - * - * TODO: kill this function once old EH is gone. - * - * LOCKING: - * Inherited from SCSI layer (none, can sleep) - */ -void ata_eng_timeout(struct ata_port *ap) -{ - DPRINTK("ENTER\n"); - - ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag)); - - DPRINTK("EXIT\n"); -} - -/** - * ata_qc_schedule_eh - schedule qc for error handling - * @qc: command to schedule error handling for - * - * Schedule error handling for @qc. EH will kick in as soon as - * other commands are drained. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_qc_schedule_eh(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - WARN_ON(!ap->ops->error_handler); - - qc->flags |= ATA_QCFLAG_FAILED; - qc->ap->flags |= ATA_FLAG_EH_PENDING; - - /* The following will fail if timeout has already expired. - * ata_scsi_error() takes care of such scmds on EH entry. - * Note that ATA_QCFLAG_FAILED is unconditionally set after - * this function completes. - */ - scsi_req_abort_cmd(qc->scsicmd); -} - -/** - * ata_port_schedule_eh - schedule error handling without a qc - * @ap: ATA port to schedule EH for - * - * Schedule error handling for @ap. EH will kick in as soon as - * all commands are drained. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_port_schedule_eh(struct ata_port *ap) -{ - WARN_ON(!ap->ops->error_handler); - - ap->flags |= ATA_FLAG_EH_PENDING; - scsi_schedule_eh(ap->host); - - DPRINTK("port EH scheduled\n"); -} - -/** - * ata_port_abort - abort all qc's on the port - * @ap: ATA port to abort qc's for - * - * Abort all active qc's of @ap and schedule EH. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Number of aborted qc's. - */ -int ata_port_abort(struct ata_port *ap) -{ - int tag, nr_aborted = 0; - - WARN_ON(!ap->ops->error_handler); - - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag); - - if (qc) { - qc->flags |= ATA_QCFLAG_FAILED; - ata_qc_complete(qc); - nr_aborted++; - } - } - - if (!nr_aborted) - ata_port_schedule_eh(ap); - - return nr_aborted; -} - -/** - * __ata_port_freeze - freeze port - * @ap: ATA port to freeze - * - * This function is called when HSM violation or some other - * condition disrupts normal operation of the port. Frozen port - * is not allowed to perform any operation until the port is - * thawed, which usually follows a successful reset. - * - * ap->ops->freeze() callback can be used for freezing the port - * hardware-wise (e.g. mask interrupt and stop DMA engine). If a - * port cannot be frozen hardware-wise, the interrupt handler - * must ack and clear interrupts unconditionally while the port - * is frozen. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -static void __ata_port_freeze(struct ata_port *ap) -{ - WARN_ON(!ap->ops->error_handler); - - if (ap->ops->freeze) - ap->ops->freeze(ap); - - ap->flags |= ATA_FLAG_FROZEN; - - DPRINTK("ata%u port frozen\n", ap->id); -} - -/** - * ata_port_freeze - abort & freeze port - * @ap: ATA port to freeze - * - * Abort and freeze @ap. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Number of aborted commands. - */ -int ata_port_freeze(struct ata_port *ap) -{ - int nr_aborted; - - WARN_ON(!ap->ops->error_handler); - - nr_aborted = ata_port_abort(ap); - __ata_port_freeze(ap); - - return nr_aborted; -} - -/** - * ata_eh_freeze_port - EH helper to freeze port - * @ap: ATA port to freeze - * - * Freeze @ap. - * - * LOCKING: - * None. - */ -void ata_eh_freeze_port(struct ata_port *ap) -{ - unsigned long flags; - - if (!ap->ops->error_handler) - return; - - spin_lock_irqsave(ap->lock, flags); - __ata_port_freeze(ap); - spin_unlock_irqrestore(ap->lock, flags); -} - -/** - * ata_port_thaw_port - EH helper to thaw port - * @ap: ATA port to thaw - * - * Thaw frozen port @ap. - * - * LOCKING: - * None. - */ -void ata_eh_thaw_port(struct ata_port *ap) -{ - unsigned long flags; - - if (!ap->ops->error_handler) - return; - - spin_lock_irqsave(ap->lock, flags); - - ap->flags &= ~ATA_FLAG_FROZEN; - - if (ap->ops->thaw) - ap->ops->thaw(ap); - - spin_unlock_irqrestore(ap->lock, flags); - - DPRINTK("ata%u port thawed\n", ap->id); -} - -static void ata_eh_scsidone(struct scsi_cmnd *scmd) -{ - /* nada */ -} - -static void __ata_eh_qc_complete(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct scsi_cmnd *scmd = qc->scsicmd; - unsigned long flags; - - spin_lock_irqsave(ap->lock, flags); - qc->scsidone = ata_eh_scsidone; - __ata_qc_complete(qc); - WARN_ON(ata_tag_valid(qc->tag)); - spin_unlock_irqrestore(ap->lock, flags); - - scsi_eh_finish_cmd(scmd, &ap->eh_done_q); -} - -/** - * ata_eh_qc_complete - Complete an active ATA command from EH - * @qc: Command to complete - * - * Indicate to the mid and upper layers that an ATA command has - * completed. To be used from EH. - */ -void ata_eh_qc_complete(struct ata_queued_cmd *qc) -{ - struct scsi_cmnd *scmd = qc->scsicmd; - scmd->retries = scmd->allowed; - __ata_eh_qc_complete(qc); -} - -/** - * ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH - * @qc: Command to retry - * - * Indicate to the mid and upper layers that an ATA command - * should be retried. To be used from EH. - * - * SCSI midlayer limits the number of retries to scmd->allowed. - * scmd->retries is decremented for commands which get retried - * due to unrelated failures (qc->err_mask is zero). - */ -void ata_eh_qc_retry(struct ata_queued_cmd *qc) -{ - struct scsi_cmnd *scmd = qc->scsicmd; - if (!qc->err_mask && scmd->retries) - scmd->retries--; - __ata_eh_qc_complete(qc); -} - -/** - * ata_eh_detach_dev - detach ATA device - * @dev: ATA device to detach - * - * Detach @dev. - * - * LOCKING: - * None. - */ -static void ata_eh_detach_dev(struct ata_device *dev) -{ - struct ata_port *ap = dev->ap; - unsigned long flags; - - ata_dev_disable(dev); - - spin_lock_irqsave(ap->lock, flags); - - dev->flags &= ~ATA_DFLAG_DETACH; - - if (ata_scsi_offline_dev(dev)) { - dev->flags |= ATA_DFLAG_DETACHED; - ap->flags |= ATA_FLAG_SCSI_HOTPLUG; - } - - spin_unlock_irqrestore(ap->lock, flags); -} - -static void ata_eh_clear_action(struct ata_device *dev, - struct ata_eh_info *ehi, unsigned int action) -{ - int i; - - if (!dev) { - ehi->action &= ~action; - for (i = 0; i < ATA_MAX_DEVICES; i++) - ehi->dev_action[i] &= ~action; - } else { - /* doesn't make sense for port-wide EH actions */ - WARN_ON(!(action & ATA_EH_PERDEV_MASK)); - - /* break ehi->action into ehi->dev_action */ - if (ehi->action & action) { - for (i = 0; i < ATA_MAX_DEVICES; i++) - ehi->dev_action[i] |= ehi->action & action; - ehi->action &= ~action; - } - - /* turn off the specified per-dev action */ - ehi->dev_action[dev->devno] &= ~action; - } -} - -/** - * ata_eh_about_to_do - about to perform eh_action - * @ap: target ATA port - * @dev: target ATA dev for per-dev action (can be NULL) - * @action: action about to be performed - * - * Called just before performing EH actions to clear related bits - * in @ap->eh_info such that eh actions are not unnecessarily - * repeated. - * - * LOCKING: - * None. - */ -static void ata_eh_about_to_do(struct ata_port *ap, struct ata_device *dev, - unsigned int action) -{ - unsigned long flags; - - spin_lock_irqsave(ap->lock, flags); - ata_eh_clear_action(dev, &ap->eh_info, action); - ap->flags |= ATA_FLAG_RECOVERED; - spin_unlock_irqrestore(ap->lock, flags); -} - -/** - * ata_eh_done - EH action complete - * @ap: target ATA port - * @dev: target ATA dev for per-dev action (can be NULL) - * @action: action just completed - * - * Called right after performing EH actions to clear related bits - * in @ap->eh_context. - * - * LOCKING: - * None. - */ -static void ata_eh_done(struct ata_port *ap, struct ata_device *dev, - unsigned int action) -{ - ata_eh_clear_action(dev, &ap->eh_context.i, action); -} - -/** - * ata_err_string - convert err_mask to descriptive string - * @err_mask: error mask to convert to string - * - * Convert @err_mask to descriptive string. Errors are - * prioritized according to severity and only the most severe - * error is reported. - * - * LOCKING: - * None. - * - * RETURNS: - * Descriptive string for @err_mask - */ -static const char * ata_err_string(unsigned int err_mask) -{ - if (err_mask & AC_ERR_HOST_BUS) - return "host bus error"; - if (err_mask & AC_ERR_ATA_BUS) - return "ATA bus error"; - if (err_mask & AC_ERR_TIMEOUT) - return "timeout"; - if (err_mask & AC_ERR_HSM) - return "HSM violation"; - if (err_mask & AC_ERR_SYSTEM) - return "internal error"; - if (err_mask & AC_ERR_MEDIA) - return "media error"; - if (err_mask & AC_ERR_INVALID) - return "invalid argument"; - if (err_mask & AC_ERR_DEV) - return "device error"; - return "unknown error"; -} - -/** - * ata_read_log_page - read a specific log page - * @dev: target device - * @page: page to read - * @buf: buffer to store read page - * @sectors: number of sectors to read - * - * Read log page using READ_LOG_EXT command. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, AC_ERR_* mask otherwise. - */ -static unsigned int ata_read_log_page(struct ata_device *dev, - u8 page, void *buf, unsigned int sectors) -{ - struct ata_taskfile tf; - unsigned int err_mask; - - DPRINTK("read log page - page %d\n", page); - - ata_tf_init(dev, &tf); - tf.command = ATA_CMD_READ_LOG_EXT; - tf.lbal = page; - tf.nsect = sectors; - tf.hob_nsect = sectors >> 8; - tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE; - tf.protocol = ATA_PROT_PIO; - - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, - buf, sectors * ATA_SECT_SIZE); - - DPRINTK("EXIT, err_mask=%x\n", err_mask); - return err_mask; -} - -/** - * ata_eh_read_log_10h - Read log page 10h for NCQ error details - * @dev: Device to read log page 10h from - * @tag: Resulting tag of the failed command - * @tf: Resulting taskfile registers of the failed command - * - * Read log page 10h to obtain NCQ error details and clear error - * condition. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -static int ata_eh_read_log_10h(struct ata_device *dev, - int *tag, struct ata_taskfile *tf) -{ - u8 *buf = dev->ap->sector_buf; - unsigned int err_mask; - u8 csum; - int i; - - err_mask = ata_read_log_page(dev, ATA_LOG_SATA_NCQ, buf, 1); - if (err_mask) - return -EIO; - - csum = 0; - for (i = 0; i < ATA_SECT_SIZE; i++) - csum += buf[i]; - if (csum) - ata_dev_printk(dev, KERN_WARNING, - "invalid checksum 0x%x on log page 10h\n", csum); - - if (buf[0] & 0x80) - return -ENOENT; - - *tag = buf[0] & 0x1f; - - tf->command = buf[2]; - tf->feature = buf[3]; - tf->lbal = buf[4]; - tf->lbam = buf[5]; - tf->lbah = buf[6]; - tf->device = buf[7]; - tf->hob_lbal = buf[8]; - tf->hob_lbam = buf[9]; - tf->hob_lbah = buf[10]; - tf->nsect = buf[12]; - tf->hob_nsect = buf[13]; - - return 0; -} - -/** - * atapi_eh_request_sense - perform ATAPI REQUEST_SENSE - * @dev: device to perform REQUEST_SENSE to - * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long) - * - * Perform ATAPI REQUEST_SENSE after the device reported CHECK - * SENSE. This function is EH helper. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, AC_ERR_* mask on failure - */ -static unsigned int atapi_eh_request_sense(struct ata_device *dev, - unsigned char *sense_buf) -{ - struct ata_port *ap = dev->ap; - struct ata_taskfile tf; - u8 cdb[ATAPI_CDB_LEN]; - - DPRINTK("ATAPI request sense\n"); - - ata_tf_init(dev, &tf); - - /* FIXME: is this needed? */ - memset(sense_buf, 0, SCSI_SENSE_BUFFERSIZE); - - /* XXX: why tf_read here? */ - ap->ops->tf_read(ap, &tf); - - /* fill these in, for the case where they are -not- overwritten */ - sense_buf[0] = 0x70; - sense_buf[2] = tf.feature >> 4; - - memset(cdb, 0, ATAPI_CDB_LEN); - cdb[0] = REQUEST_SENSE; - cdb[4] = SCSI_SENSE_BUFFERSIZE; - - tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - tf.command = ATA_CMD_PACKET; - - /* is it pointless to prefer PIO for "safety reasons"? */ - if (ap->flags & ATA_FLAG_PIO_DMA) { - tf.protocol = ATA_PROT_ATAPI_DMA; - tf.feature |= ATAPI_PKT_DMA; - } else { - tf.protocol = ATA_PROT_ATAPI; - tf.lbam = (8 * 1024) & 0xff; - tf.lbah = (8 * 1024) >> 8; - } - - return ata_exec_internal(dev, &tf, cdb, DMA_FROM_DEVICE, - sense_buf, SCSI_SENSE_BUFFERSIZE); -} - -/** - * ata_eh_analyze_serror - analyze SError for a failed port - * @ap: ATA port to analyze SError for - * - * Analyze SError if available and further determine cause of - * failure. - * - * LOCKING: - * None. - */ -static void ata_eh_analyze_serror(struct ata_port *ap) -{ - struct ata_eh_context *ehc = &ap->eh_context; - u32 serror = ehc->i.serror; - unsigned int err_mask = 0, action = 0; - - if (serror & SERR_PERSISTENT) { - err_mask |= AC_ERR_ATA_BUS; - action |= ATA_EH_HARDRESET; - } - if (serror & - (SERR_DATA_RECOVERED | SERR_COMM_RECOVERED | SERR_DATA)) { - err_mask |= AC_ERR_ATA_BUS; - action |= ATA_EH_SOFTRESET; - } - if (serror & SERR_PROTOCOL) { - err_mask |= AC_ERR_HSM; - action |= ATA_EH_SOFTRESET; - } - if (serror & SERR_INTERNAL) { - err_mask |= AC_ERR_SYSTEM; - action |= ATA_EH_SOFTRESET; - } - if (serror & (SERR_PHYRDY_CHG | SERR_DEV_XCHG)) - ata_ehi_hotplugged(&ehc->i); - - ehc->i.err_mask |= err_mask; - ehc->i.action |= action; -} - -/** - * ata_eh_analyze_ncq_error - analyze NCQ error - * @ap: ATA port to analyze NCQ error for - * - * Read log page 10h, determine the offending qc and acquire - * error status TF. For NCQ device errors, all LLDDs have to do - * is setting AC_ERR_DEV in ehi->err_mask. This function takes - * care of the rest. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -static void ata_eh_analyze_ncq_error(struct ata_port *ap) -{ - struct ata_eh_context *ehc = &ap->eh_context; - struct ata_device *dev = ap->device; - struct ata_queued_cmd *qc; - struct ata_taskfile tf; - int tag, rc; - - /* if frozen, we can't do much */ - if (ap->flags & ATA_FLAG_FROZEN) - return; - - /* is it NCQ device error? */ - if (!ap->sactive || !(ehc->i.err_mask & AC_ERR_DEV)) - return; - - /* has LLDD analyzed already? */ - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - qc = __ata_qc_from_tag(ap, tag); - - if (!(qc->flags & ATA_QCFLAG_FAILED)) - continue; - - if (qc->err_mask) - return; - } - - /* okay, this error is ours */ - rc = ata_eh_read_log_10h(dev, &tag, &tf); - if (rc) { - ata_port_printk(ap, KERN_ERR, "failed to read log page 10h " - "(errno=%d)\n", rc); - return; - } - - if (!(ap->sactive & (1 << tag))) { - ata_port_printk(ap, KERN_ERR, "log page 10h reported " - "inactive tag %d\n", tag); - return; - } - - /* we've got the perpetrator, condemn it */ - qc = __ata_qc_from_tag(ap, tag); - memcpy(&qc->result_tf, &tf, sizeof(tf)); - qc->err_mask |= AC_ERR_DEV; - ehc->i.err_mask &= ~AC_ERR_DEV; -} - -/** - * ata_eh_analyze_tf - analyze taskfile of a failed qc - * @qc: qc to analyze - * @tf: Taskfile registers to analyze - * - * Analyze taskfile of @qc and further determine cause of - * failure. This function also requests ATAPI sense data if - * avaliable. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * Determined recovery action - */ -static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc, - const struct ata_taskfile *tf) -{ - unsigned int tmp, action = 0; - u8 stat = tf->command, err = tf->feature; - - if ((stat & (ATA_BUSY | ATA_DRQ | ATA_DRDY)) != ATA_DRDY) { - qc->err_mask |= AC_ERR_HSM; - return ATA_EH_SOFTRESET; - } - - if (!(qc->err_mask & AC_ERR_DEV)) - return 0; - - switch (qc->dev->class) { - case ATA_DEV_ATA: - if (err & ATA_ICRC) - qc->err_mask |= AC_ERR_ATA_BUS; - if (err & ATA_UNC) - qc->err_mask |= AC_ERR_MEDIA; - if (err & ATA_IDNF) - qc->err_mask |= AC_ERR_INVALID; - break; - - case ATA_DEV_ATAPI: - tmp = atapi_eh_request_sense(qc->dev, - qc->scsicmd->sense_buffer); - if (!tmp) { - /* ATA_QCFLAG_SENSE_VALID is used to tell - * atapi_qc_complete() that sense data is - * already valid. - * - * TODO: interpret sense data and set - * appropriate err_mask. - */ - qc->flags |= ATA_QCFLAG_SENSE_VALID; - } else - qc->err_mask |= tmp; - } - - if (qc->err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT | AC_ERR_ATA_BUS)) - action |= ATA_EH_SOFTRESET; - - return action; -} - -static int ata_eh_categorize_ering_entry(struct ata_ering_entry *ent) -{ - if (ent->err_mask & (AC_ERR_ATA_BUS | AC_ERR_TIMEOUT)) - return 1; - - if (ent->is_io) { - if (ent->err_mask & AC_ERR_HSM) - return 1; - if ((ent->err_mask & - (AC_ERR_DEV|AC_ERR_MEDIA|AC_ERR_INVALID)) == AC_ERR_DEV) - return 2; - } - - return 0; -} - -struct speed_down_needed_arg { - u64 since; - int nr_errors[3]; -}; - -static int speed_down_needed_cb(struct ata_ering_entry *ent, void *void_arg) -{ - struct speed_down_needed_arg *arg = void_arg; - - if (ent->timestamp < arg->since) - return -1; - - arg->nr_errors[ata_eh_categorize_ering_entry(ent)]++; - return 0; -} - -/** - * ata_eh_speed_down_needed - Determine wheter speed down is necessary - * @dev: Device of interest - * - * This function examines error ring of @dev and determines - * whether speed down is necessary. Speed down is necessary if - * there have been more than 3 of Cat-1 errors or 10 of Cat-2 - * errors during last 15 minutes. - * - * Cat-1 errors are ATA_BUS, TIMEOUT for any command and HSM - * violation for known supported commands. - * - * Cat-2 errors are unclassified DEV error for known supported - * command. - * - * LOCKING: - * Inherited from caller. - * - * RETURNS: - * 1 if speed down is necessary, 0 otherwise - */ -static int ata_eh_speed_down_needed(struct ata_device *dev) -{ - const u64 interval = 15LLU * 60 * HZ; - static const int err_limits[3] = { -1, 3, 10 }; - struct speed_down_needed_arg arg; - struct ata_ering_entry *ent; - int err_cat; - u64 j64; - - ent = ata_ering_top(&dev->ering); - if (!ent) - return 0; - - err_cat = ata_eh_categorize_ering_entry(ent); - if (err_cat == 0) - return 0; - - memset(&arg, 0, sizeof(arg)); - - j64 = get_jiffies_64(); - if (j64 >= interval) - arg.since = j64 - interval; - else - arg.since = 0; - - ata_ering_map(&dev->ering, speed_down_needed_cb, &arg); - - return arg.nr_errors[err_cat] > err_limits[err_cat]; -} - -/** - * ata_eh_speed_down - record error and speed down if necessary - * @dev: Failed device - * @is_io: Did the device fail during normal IO? - * @err_mask: err_mask of the error - * - * Record error and examine error history to determine whether - * adjusting transmission speed is necessary. It also sets - * transmission limits appropriately if such adjustment is - * necessary. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, -errno otherwise - */ -static int ata_eh_speed_down(struct ata_device *dev, int is_io, - unsigned int err_mask) -{ - if (!err_mask) - return 0; - - /* record error and determine whether speed down is necessary */ - ata_ering_record(&dev->ering, is_io, err_mask); - - if (!ata_eh_speed_down_needed(dev)) - return 0; - - /* speed down SATA link speed if possible */ - if (sata_down_spd_limit(dev->ap) == 0) - return ATA_EH_HARDRESET; - - /* lower transfer mode */ - if (ata_down_xfermask_limit(dev, 0) == 0) - return ATA_EH_SOFTRESET; - - ata_dev_printk(dev, KERN_ERR, - "speed down requested but no transfer mode left\n"); - return 0; -} - -/** - * ata_eh_autopsy - analyze error and determine recovery action - * @ap: ATA port to perform autopsy on - * - * Analyze why @ap failed and determine which recovery action is - * needed. This function also sets more detailed AC_ERR_* values - * and fills sense data for ATAPI CHECK SENSE. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -static void ata_eh_autopsy(struct ata_port *ap) -{ - struct ata_eh_context *ehc = &ap->eh_context; - unsigned int action = ehc->i.action; - struct ata_device *failed_dev = NULL; - unsigned int all_err_mask = 0; - int tag, is_io = 0; - u32 serror; - int rc; - - DPRINTK("ENTER\n"); - - /* obtain and analyze SError */ - rc = sata_scr_read(ap, SCR_ERROR, &serror); - if (rc == 0) { - ehc->i.serror |= serror; - ata_eh_analyze_serror(ap); - } else if (rc != -EOPNOTSUPP) - action |= ATA_EH_HARDRESET; - - /* analyze NCQ failure */ - ata_eh_analyze_ncq_error(ap); - - /* any real error trumps AC_ERR_OTHER */ - if (ehc->i.err_mask & ~AC_ERR_OTHER) - ehc->i.err_mask &= ~AC_ERR_OTHER; - - all_err_mask |= ehc->i.err_mask; - - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); - - if (!(qc->flags & ATA_QCFLAG_FAILED)) - continue; - - /* inherit upper level err_mask */ - qc->err_mask |= ehc->i.err_mask; - - /* analyze TF */ - action |= ata_eh_analyze_tf(qc, &qc->result_tf); - - /* DEV errors are probably spurious in case of ATA_BUS error */ - if (qc->err_mask & AC_ERR_ATA_BUS) - qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_MEDIA | - AC_ERR_INVALID); - - /* any real error trumps unknown error */ - if (qc->err_mask & ~AC_ERR_OTHER) - qc->err_mask &= ~AC_ERR_OTHER; - - /* SENSE_VALID trumps dev/unknown error and revalidation */ - if (qc->flags & ATA_QCFLAG_SENSE_VALID) { - qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER); - action &= ~ATA_EH_REVALIDATE; - } - - /* accumulate error info */ - failed_dev = qc->dev; - all_err_mask |= qc->err_mask; - if (qc->flags & ATA_QCFLAG_IO) - is_io = 1; - } - - /* enforce default EH actions */ - if (ap->flags & ATA_FLAG_FROZEN || - all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT)) - action |= ATA_EH_SOFTRESET; - else if (all_err_mask) - action |= ATA_EH_REVALIDATE; - - /* if we have offending qcs and the associated failed device */ - if (failed_dev) { - /* speed down */ - action |= ata_eh_speed_down(failed_dev, is_io, all_err_mask); - - /* perform per-dev EH action only on the offending device */ - ehc->i.dev_action[failed_dev->devno] |= - action & ATA_EH_PERDEV_MASK; - action &= ~ATA_EH_PERDEV_MASK; - } - - /* record autopsy result */ - ehc->i.dev = failed_dev; - ehc->i.action = action; - - DPRINTK("EXIT\n"); -} - -/** - * ata_eh_report - report error handling to user - * @ap: ATA port EH is going on - * - * Report EH to user. - * - * LOCKING: - * None. - */ -static void ata_eh_report(struct ata_port *ap) -{ - struct ata_eh_context *ehc = &ap->eh_context; - const char *frozen, *desc; - int tag, nr_failed = 0; - - desc = NULL; - if (ehc->i.desc[0] != '\0') - desc = ehc->i.desc; - - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); - - if (!(qc->flags & ATA_QCFLAG_FAILED)) - continue; - if (qc->flags & ATA_QCFLAG_SENSE_VALID && !qc->err_mask) - continue; - - nr_failed++; - } - - if (!nr_failed && !ehc->i.err_mask) - return; - - frozen = ""; - if (ap->flags & ATA_FLAG_FROZEN) - frozen = " frozen"; - - if (ehc->i.dev) { - ata_dev_printk(ehc->i.dev, KERN_ERR, "exception Emask 0x%x " - "SAct 0x%x SErr 0x%x action 0x%x%s\n", - ehc->i.err_mask, ap->sactive, ehc->i.serror, - ehc->i.action, frozen); - if (desc) - ata_dev_printk(ehc->i.dev, KERN_ERR, "(%s)\n", desc); - } else { - ata_port_printk(ap, KERN_ERR, "exception Emask 0x%x " - "SAct 0x%x SErr 0x%x action 0x%x%s\n", - ehc->i.err_mask, ap->sactive, ehc->i.serror, - ehc->i.action, frozen); - if (desc) - ata_port_printk(ap, KERN_ERR, "(%s)\n", desc); - } - - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); - - if (!(qc->flags & ATA_QCFLAG_FAILED) || !qc->err_mask) - continue; - - ata_dev_printk(qc->dev, KERN_ERR, "tag %d cmd 0x%x " - "Emask 0x%x stat 0x%x err 0x%x (%s)\n", - qc->tag, qc->tf.command, qc->err_mask, - qc->result_tf.command, qc->result_tf.feature, - ata_err_string(qc->err_mask)); - } -} - -static int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset, - unsigned int *classes) -{ - int i, rc; - - for (i = 0; i < ATA_MAX_DEVICES; i++) - classes[i] = ATA_DEV_UNKNOWN; - - rc = reset(ap, classes); - if (rc) - return rc; - - /* If any class isn't ATA_DEV_UNKNOWN, consider classification - * is complete and convert all ATA_DEV_UNKNOWN to - * ATA_DEV_NONE. - */ - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (classes[i] != ATA_DEV_UNKNOWN) - break; - - if (i < ATA_MAX_DEVICES) - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (classes[i] == ATA_DEV_UNKNOWN) - classes[i] = ATA_DEV_NONE; - - return 0; -} - -static int ata_eh_followup_srst_needed(int rc, int classify, - const unsigned int *classes) -{ - if (rc == -EAGAIN) - return 1; - if (rc != 0) - return 0; - if (classify && classes[0] == ATA_DEV_UNKNOWN) - return 1; - return 0; -} - -static int ata_eh_reset(struct ata_port *ap, int classify, - ata_prereset_fn_t prereset, ata_reset_fn_t softreset, - ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) -{ - struct ata_eh_context *ehc = &ap->eh_context; - unsigned int *classes = ehc->classes; - int tries = ATA_EH_RESET_TRIES; - int verbose = !(ap->flags & ATA_FLAG_LOADING); - unsigned int action; - ata_reset_fn_t reset; - int i, did_followup_srst, rc; - - /* Determine which reset to use and record in ehc->i.action. - * prereset() may examine and modify it. - */ - action = ehc->i.action; - ehc->i.action &= ~ATA_EH_RESET_MASK; - if (softreset && (!hardreset || (!sata_set_spd_needed(ap) && - !(action & ATA_EH_HARDRESET)))) - ehc->i.action |= ATA_EH_SOFTRESET; - else - ehc->i.action |= ATA_EH_HARDRESET; - - if (prereset) { - rc = prereset(ap); - if (rc) { - ata_port_printk(ap, KERN_ERR, - "prereset failed (errno=%d)\n", rc); - return rc; - } - } - - /* prereset() might have modified ehc->i.action */ - if (ehc->i.action & ATA_EH_HARDRESET) - reset = hardreset; - else if (ehc->i.action & ATA_EH_SOFTRESET) - reset = softreset; - else { - /* prereset told us not to reset, bang classes and return */ - for (i = 0; i < ATA_MAX_DEVICES; i++) - classes[i] = ATA_DEV_NONE; - return 0; - } - - /* did prereset() screw up? if so, fix up to avoid oopsing */ - if (!reset) { - ata_port_printk(ap, KERN_ERR, "BUG: prereset() requested " - "invalid reset type\n"); - if (softreset) - reset = softreset; - else - reset = hardreset; - } - - retry: - /* shut up during boot probing */ - if (verbose) - ata_port_printk(ap, KERN_INFO, "%s resetting port\n", - reset == softreset ? "soft" : "hard"); - - /* reset */ - ata_eh_about_to_do(ap, NULL, ATA_EH_RESET_MASK); - ehc->i.flags |= ATA_EHI_DID_RESET; - - rc = ata_do_reset(ap, reset, classes); - - did_followup_srst = 0; - if (reset == hardreset && - ata_eh_followup_srst_needed(rc, classify, classes)) { - /* okay, let's do follow-up softreset */ - did_followup_srst = 1; - reset = softreset; - - if (!reset) { - ata_port_printk(ap, KERN_ERR, - "follow-up softreset required " - "but no softreset avaliable\n"); - return -EINVAL; - } - - ata_eh_about_to_do(ap, NULL, ATA_EH_RESET_MASK); - rc = ata_do_reset(ap, reset, classes); - - if (rc == 0 && classify && - classes[0] == ATA_DEV_UNKNOWN) { - ata_port_printk(ap, KERN_ERR, - "classification failed\n"); - return -EINVAL; - } - } - - if (rc && --tries) { - const char *type; - - if (reset == softreset) { - if (did_followup_srst) - type = "follow-up soft"; - else - type = "soft"; - } else - type = "hard"; - - ata_port_printk(ap, KERN_WARNING, - "%sreset failed, retrying in 5 secs\n", type); - ssleep(5); - - if (reset == hardreset) - sata_down_spd_limit(ap); - if (hardreset) - reset = hardreset; - goto retry; - } - - if (rc == 0) { - /* After the reset, the device state is PIO 0 and the - * controller state is undefined. Record the mode. - */ - for (i = 0; i < ATA_MAX_DEVICES; i++) - ap->device[i].pio_mode = XFER_PIO_0; - - if (postreset) - postreset(ap, classes); - - /* reset successful, schedule revalidation */ - ata_eh_done(ap, NULL, ATA_EH_RESET_MASK); - ehc->i.action |= ATA_EH_REVALIDATE; - } - - return rc; -} - -static int ata_eh_revalidate_and_attach(struct ata_port *ap, - struct ata_device **r_failed_dev) -{ - struct ata_eh_context *ehc = &ap->eh_context; - struct ata_device *dev; - unsigned long flags; - int i, rc = 0; - - DPRINTK("ENTER\n"); - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - unsigned int action; - - dev = &ap->device[i]; - action = ehc->i.action | ehc->i.dev_action[dev->devno]; - - if (action & ATA_EH_REVALIDATE && ata_dev_enabled(dev)) { - if (ata_port_offline(ap)) { - rc = -EIO; - break; - } - - ata_eh_about_to_do(ap, dev, ATA_EH_REVALIDATE); - rc = ata_dev_revalidate(dev, - ehc->i.flags & ATA_EHI_DID_RESET); - if (rc) - break; - - ata_eh_done(ap, dev, ATA_EH_REVALIDATE); - - /* schedule the scsi_rescan_device() here */ - queue_work(ata_aux_wq, &(ap->scsi_rescan_task)); - } else if (dev->class == ATA_DEV_UNKNOWN && - ehc->tries[dev->devno] && - ata_class_enabled(ehc->classes[dev->devno])) { - dev->class = ehc->classes[dev->devno]; - - rc = ata_dev_read_id(dev, &dev->class, 1, dev->id); - if (rc == 0) - rc = ata_dev_configure(dev, 1); - - if (rc) { - dev->class = ATA_DEV_UNKNOWN; - break; - } - - spin_lock_irqsave(ap->lock, flags); - ap->flags |= ATA_FLAG_SCSI_HOTPLUG; - spin_unlock_irqrestore(ap->lock, flags); - } - } - - if (rc) - *r_failed_dev = dev; - - DPRINTK("EXIT\n"); - return rc; -} - -static int ata_port_nr_enabled(struct ata_port *ap) -{ - int i, cnt = 0; - - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (ata_dev_enabled(&ap->device[i])) - cnt++; - return cnt; -} - -static int ata_port_nr_vacant(struct ata_port *ap) -{ - int i, cnt = 0; - - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (ap->device[i].class == ATA_DEV_UNKNOWN) - cnt++; - return cnt; -} - -static int ata_eh_skip_recovery(struct ata_port *ap) -{ - struct ata_eh_context *ehc = &ap->eh_context; - int i; - - if (ap->flags & ATA_FLAG_FROZEN || ata_port_nr_enabled(ap)) - return 0; - - /* skip if class codes for all vacant slots are ATA_DEV_NONE */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; - - if (dev->class == ATA_DEV_UNKNOWN && - ehc->classes[dev->devno] != ATA_DEV_NONE) - return 0; - } - - return 1; -} - -/** - * ata_eh_recover - recover host port after error - * @ap: host port to recover - * @prereset: prereset method (can be NULL) - * @softreset: softreset method (can be NULL) - * @hardreset: hardreset method (can be NULL) - * @postreset: postreset method (can be NULL) - * - * This is the alpha and omega, eum and yang, heart and soul of - * libata exception handling. On entry, actions required to - * recover the port and hotplug requests are recorded in - * eh_context. This function executes all the operations with - * appropriate retrials and fallbacks to resurrect failed - * devices, detach goners and greet newcomers. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, -errno on failure. - */ -static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, - ata_reset_fn_t softreset, ata_reset_fn_t hardreset, - ata_postreset_fn_t postreset) -{ - struct ata_eh_context *ehc = &ap->eh_context; - struct ata_device *dev; - int down_xfermask, i, rc; - - DPRINTK("ENTER\n"); - - /* prep for recovery */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - - ehc->tries[dev->devno] = ATA_EH_DEV_TRIES; - - /* process hotplug request */ - if (dev->flags & ATA_DFLAG_DETACH) - ata_eh_detach_dev(dev); - - if (!ata_dev_enabled(dev) && - ((ehc->i.probe_mask & (1 << dev->devno)) && - !(ehc->did_probe_mask & (1 << dev->devno)))) { - ata_eh_detach_dev(dev); - ata_dev_init(dev); - ehc->did_probe_mask |= (1 << dev->devno); - ehc->i.action |= ATA_EH_SOFTRESET; - } - } - - retry: - down_xfermask = 0; - rc = 0; - - /* if UNLOADING, finish immediately */ - if (ap->flags & ATA_FLAG_UNLOADING) - goto out; - - /* skip EH if possible. */ - if (ata_eh_skip_recovery(ap)) - ehc->i.action = 0; - - for (i = 0; i < ATA_MAX_DEVICES; i++) - ehc->classes[i] = ATA_DEV_UNKNOWN; - - /* reset */ - if (ehc->i.action & ATA_EH_RESET_MASK) { - ata_eh_freeze_port(ap); - - rc = ata_eh_reset(ap, ata_port_nr_vacant(ap), prereset, - softreset, hardreset, postreset); - if (rc) { - ata_port_printk(ap, KERN_ERR, - "reset failed, giving up\n"); - goto out; - } - - ata_eh_thaw_port(ap); - } - - /* revalidate existing devices and attach new ones */ - rc = ata_eh_revalidate_and_attach(ap, &dev); - if (rc) - goto dev_fail; - - /* configure transfer mode if the port has been reset */ - if (ehc->i.flags & ATA_EHI_DID_RESET) { - rc = ata_set_mode(ap, &dev); - if (rc) { - down_xfermask = 1; - goto dev_fail; - } - } - - goto out; - - dev_fail: - switch (rc) { - case -ENODEV: - /* device missing, schedule probing */ - ehc->i.probe_mask |= (1 << dev->devno); - case -EINVAL: - ehc->tries[dev->devno] = 0; - break; - case -EIO: - sata_down_spd_limit(ap); - default: - ehc->tries[dev->devno]--; - if (down_xfermask && - ata_down_xfermask_limit(dev, ehc->tries[dev->devno] == 1)) - ehc->tries[dev->devno] = 0; - } - - if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) { - /* disable device if it has used up all its chances */ - ata_dev_disable(dev); - - /* detach if offline */ - if (ata_port_offline(ap)) - ata_eh_detach_dev(dev); - - /* probe if requested */ - if ((ehc->i.probe_mask & (1 << dev->devno)) && - !(ehc->did_probe_mask & (1 << dev->devno))) { - ata_eh_detach_dev(dev); - ata_dev_init(dev); - - ehc->tries[dev->devno] = ATA_EH_DEV_TRIES; - ehc->did_probe_mask |= (1 << dev->devno); - ehc->i.action |= ATA_EH_SOFTRESET; - } - } else { - /* soft didn't work? be haaaaard */ - if (ehc->i.flags & ATA_EHI_DID_RESET) - ehc->i.action |= ATA_EH_HARDRESET; - else - ehc->i.action |= ATA_EH_SOFTRESET; - } - - if (ata_port_nr_enabled(ap)) { - ata_port_printk(ap, KERN_WARNING, "failed to recover some " - "devices, retrying in 5 secs\n"); - ssleep(5); - } else { - /* no device left, repeat fast */ - msleep(500); - } - - goto retry; - - out: - if (rc) { - for (i = 0; i < ATA_MAX_DEVICES; i++) - ata_dev_disable(&ap->device[i]); - } - - DPRINTK("EXIT, rc=%d\n", rc); - return rc; -} - -/** - * ata_eh_finish - finish up EH - * @ap: host port to finish EH for - * - * Recovery is complete. Clean up EH states and retry or finish - * failed qcs. - * - * LOCKING: - * None. - */ -static void ata_eh_finish(struct ata_port *ap) -{ - int tag; - - /* retry or finish qcs */ - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); - - if (!(qc->flags & ATA_QCFLAG_FAILED)) - continue; - - if (qc->err_mask) { - /* FIXME: Once EH migration is complete, - * generate sense data in this function, - * considering both err_mask and tf. - */ - if (qc->err_mask & AC_ERR_INVALID) - ata_eh_qc_complete(qc); - else - ata_eh_qc_retry(qc); - } else { - if (qc->flags & ATA_QCFLAG_SENSE_VALID) { - ata_eh_qc_complete(qc); - } else { - /* feed zero TF to sense generation */ - memset(&qc->result_tf, 0, sizeof(qc->result_tf)); - ata_eh_qc_retry(qc); - } - } - } -} - -/** - * ata_do_eh - do standard error handling - * @ap: host port to handle error for - * @prereset: prereset method (can be NULL) - * @softreset: softreset method (can be NULL) - * @hardreset: hardreset method (can be NULL) - * @postreset: postreset method (can be NULL) - * - * Perform standard error handling sequence. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, - ata_reset_fn_t softreset, ata_reset_fn_t hardreset, - ata_postreset_fn_t postreset) -{ - if (!(ap->flags & ATA_FLAG_LOADING)) { - ata_eh_autopsy(ap); - ata_eh_report(ap); - } - - ata_eh_recover(ap, prereset, softreset, hardreset, postreset); - ata_eh_finish(ap); -} diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c deleted file mode 100644 index 93d18a74c40..00000000000 --- a/drivers/scsi/libata-scsi.c +++ /dev/null @@ -1,3052 +0,0 @@ -/* - * libata-scsi.c - helper library for ATA - * - * Maintained by: Jeff Garzik <jgarzik@pobox.com> - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2003-2004 Red Hat, Inc. All rights reserved. - * Copyright 2003-2004 Jeff Garzik - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available from - * - http://www.t10.org/ - * - http://www.t13.org/ - * - */ - -#include <linux/kernel.h> -#include <linux/blkdev.h> -#include <linux/spinlock.h> -#include <scsi/scsi.h> -#include <scsi/scsi_host.h> -#include <scsi/scsi_cmnd.h> -#include <scsi/scsi_eh.h> -#include <scsi/scsi_device.h> -#include <scsi/scsi_tcq.h> -#include <scsi/scsi_transport.h> -#include <linux/libata.h> -#include <linux/hdreg.h> -#include <asm/uaccess.h> - -#include "libata.h" - -#define SECTOR_SIZE 512 - -typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd); - -static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap, - const struct scsi_device *scsidev); -static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, - const struct scsi_device *scsidev); -static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, - unsigned int id, unsigned int lun); - - -#define RW_RECOVERY_MPAGE 0x1 -#define RW_RECOVERY_MPAGE_LEN 12 -#define CACHE_MPAGE 0x8 -#define CACHE_MPAGE_LEN 20 -#define CONTROL_MPAGE 0xa -#define CONTROL_MPAGE_LEN 12 -#define ALL_MPAGES 0x3f -#define ALL_SUB_MPAGES 0xff - - -static const u8 def_rw_recovery_mpage[] = { - RW_RECOVERY_MPAGE, - RW_RECOVERY_MPAGE_LEN - 2, - (1 << 7) | /* AWRE, sat-r06 say it shall be 0 */ - (1 << 6), /* ARRE (auto read reallocation) */ - 0, /* read retry count */ - 0, 0, 0, 0, - 0, /* write retry count */ - 0, 0, 0 -}; - -static const u8 def_cache_mpage[CACHE_MPAGE_LEN] = { - CACHE_MPAGE, - CACHE_MPAGE_LEN - 2, - 0, /* contains WCE, needs to be 0 for logic */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, /* contains DRA, needs to be 0 for logic */ - 0, 0, 0, 0, 0, 0, 0 -}; - -static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = { - CONTROL_MPAGE, - CONTROL_MPAGE_LEN - 2, - 2, /* DSENSE=0, GLTSD=1 */ - 0, /* [QAM+QERR may be 1, see 05-359r1] */ - 0, 0, 0, 0, 0xff, 0xff, - 0, 30 /* extended self test time, see 05-359r1 */ -}; - -/* - * libata transport template. libata doesn't do real transport stuff. - * It just needs the eh_timed_out hook. - */ -struct scsi_transport_template ata_scsi_transport_template = { - .eh_strategy_handler = ata_scsi_error, - .eh_timed_out = ata_scsi_timed_out, - .user_scan = ata_scsi_user_scan, -}; - - -static void ata_scsi_invalid_field(struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *)) -{ - ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0); - /* "Invalid field in cbd" */ - done(cmd); -} - -/** - * ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd. - * @sdev: SCSI device for which BIOS geometry is to be determined - * @bdev: block device associated with @sdev - * @capacity: capacity of SCSI device - * @geom: location to which geometry will be output - * - * Generic bios head/sector/cylinder calculator - * used by sd. Most BIOSes nowadays expect a XXX/255/16 (CHS) - * mapping. Some situations may arise where the disk is not - * bootable if this is not used. - * - * LOCKING: - * Defined by the SCSI layer. We don't really care. - * - * RETURNS: - * Zero. - */ -int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev, - sector_t capacity, int geom[]) -{ - geom[0] = 255; - geom[1] = 63; - sector_div(capacity, 255*63); - geom[2] = capacity; - - return 0; -} - -/** - * ata_cmd_ioctl - Handler for HDIO_DRIVE_CMD ioctl - * @scsidev: Device to which we are issuing command - * @arg: User provided data for issuing command - * - * LOCKING: - * Defined by the SCSI layer. We don't really care. - * - * RETURNS: - * Zero on success, negative errno on error. - */ - -int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) -{ - int rc = 0; - u8 scsi_cmd[MAX_COMMAND_SIZE]; - u8 args[4], *argbuf = NULL; - int argsize = 0; - struct scsi_sense_hdr sshdr; - enum dma_data_direction data_dir; - - if (arg == NULL) - return -EINVAL; - - if (copy_from_user(args, arg, sizeof(args))) - return -EFAULT; - - memset(scsi_cmd, 0, sizeof(scsi_cmd)); - - if (args[3]) { - argsize = SECTOR_SIZE * args[3]; - argbuf = kmalloc(argsize, GFP_KERNEL); - if (argbuf == NULL) { - rc = -ENOMEM; - goto error; - } - - scsi_cmd[1] = (4 << 1); /* PIO Data-in */ - scsi_cmd[2] = 0x0e; /* no off.line or cc, read from dev, - block count in sector count field */ - data_dir = DMA_FROM_DEVICE; - } else { - scsi_cmd[1] = (3 << 1); /* Non-data */ - /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */ - data_dir = DMA_NONE; - } - - scsi_cmd[0] = ATA_16; - - scsi_cmd[4] = args[2]; - if (args[0] == WIN_SMART) { /* hack -- ide driver does this too... */ - scsi_cmd[6] = args[3]; - scsi_cmd[8] = args[1]; - scsi_cmd[10] = 0x4f; - scsi_cmd[12] = 0xc2; - } else { - scsi_cmd[6] = args[1]; - } - scsi_cmd[14] = args[0]; - - /* Good values for timeout and retries? Values below - from scsi_ioctl_send_command() for default case... */ - if (scsi_execute_req(scsidev, scsi_cmd, data_dir, argbuf, argsize, - &sshdr, (10*HZ), 5)) { - rc = -EIO; - goto error; - } - - /* Need code to retrieve data from check condition? */ - - if ((argbuf) - && copy_to_user(arg + sizeof(args), argbuf, argsize)) - rc = -EFAULT; -error: - if (argbuf) - kfree(argbuf); - - return rc; -} - -/** - * ata_task_ioctl - Handler for HDIO_DRIVE_TASK ioctl - * @scsidev: Device to which we are issuing command - * @arg: User provided data for issuing command - * - * LOCKING: - * Defined by the SCSI layer. We don't really care. - * - * RETURNS: - * Zero on success, negative errno on error. - */ -int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) -{ - int rc = 0; - u8 scsi_cmd[MAX_COMMAND_SIZE]; - u8 args[7]; - struct scsi_sense_hdr sshdr; - - if (arg == NULL) - return -EINVAL; - - if (copy_from_user(args, arg, sizeof(args))) - return -EFAULT; - - memset(scsi_cmd, 0, sizeof(scsi_cmd)); - scsi_cmd[0] = ATA_16; - scsi_cmd[1] = (3 << 1); /* Non-data */ - /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */ - scsi_cmd[4] = args[1]; - scsi_cmd[6] = args[2]; - scsi_cmd[8] = args[3]; - scsi_cmd[10] = args[4]; - scsi_cmd[12] = args[5]; - scsi_cmd[14] = args[0]; - - /* Good values for timeout and retries? Values below - from scsi_ioctl_send_command() for default case... */ - if (scsi_execute_req(scsidev, scsi_cmd, DMA_NONE, NULL, 0, &sshdr, - (10*HZ), 5)) - rc = -EIO; - - /* Need code to retrieve data from check condition? */ - return rc; -} - -int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg) -{ - int val = -EINVAL, rc = -EINVAL; - - switch (cmd) { - case ATA_IOC_GET_IO32: - val = 0; - if (copy_to_user(arg, &val, 1)) - return -EFAULT; - return 0; - - case ATA_IOC_SET_IO32: - val = (unsigned long) arg; - if (val != 0) - return -EINVAL; - return 0; - - case HDIO_DRIVE_CMD: - if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) - return -EACCES; - return ata_cmd_ioctl(scsidev, arg); - - case HDIO_DRIVE_TASK: - if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) - return -EACCES; - return ata_task_ioctl(scsidev, arg); - - default: - rc = -ENOTTY; - break; - } - - return rc; -} - -/** - * ata_scsi_qc_new - acquire new ata_queued_cmd reference - * @dev: ATA device to which the new command is attached - * @cmd: SCSI command that originated this ATA command - * @done: SCSI command completion function - * - * Obtain a reference to an unused ata_queued_cmd structure, - * which is the basic libata structure representing a single - * ATA command sent to the hardware. - * - * If a command was available, fill in the SCSI-specific - * portions of the structure with information on the - * current command. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Command allocated, or %NULL if none available. - */ -struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev, - struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *)) -{ - struct ata_queued_cmd *qc; - - qc = ata_qc_new_init(dev); - if (qc) { - qc->scsicmd = cmd; - qc->scsidone = done; - - if (cmd->use_sg) { - qc->__sg = (struct scatterlist *) cmd->request_buffer; - qc->n_elem = cmd->use_sg; - } else { - qc->__sg = &qc->sgent; - qc->n_elem = 1; - } - } else { - cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1); - done(cmd); - } - - return qc; -} - -/** - * ata_dump_status - user friendly display of error info - * @id: id of the port in question - * @tf: ptr to filled out taskfile - * - * Decode and dump the ATA error/status registers for the user so - * that they have some idea what really happened at the non - * make-believe layer. - * - * LOCKING: - * inherited from caller - */ -void ata_dump_status(unsigned id, struct ata_taskfile *tf) -{ - u8 stat = tf->command, err = tf->feature; - - printk(KERN_WARNING "ata%u: status=0x%02x { ", id, stat); - if (stat & ATA_BUSY) { - printk("Busy }\n"); /* Data is not valid in this case */ - } else { - if (stat & 0x40) printk("DriveReady "); - if (stat & 0x20) printk("DeviceFault "); - if (stat & 0x10) printk("SeekComplete "); - if (stat & 0x08) printk("DataRequest "); - if (stat & 0x04) printk("CorrectedError "); - if (stat & 0x02) printk("Index "); - if (stat & 0x01) printk("Error "); - printk("}\n"); - - if (err) { - printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err); - if (err & 0x04) printk("DriveStatusError "); - if (err & 0x80) { - if (err & 0x04) printk("BadCRC "); - else printk("Sector "); - } - if (err & 0x40) printk("UncorrectableError "); - if (err & 0x10) printk("SectorIdNotFound "); - if (err & 0x02) printk("TrackZeroNotFound "); - if (err & 0x01) printk("AddrMarkNotFound "); - printk("}\n"); - } - } -} - -int ata_scsi_device_resume(struct scsi_device *sdev) -{ - struct ata_port *ap = ata_shost_to_port(sdev->host); - struct ata_device *dev = __ata_scsi_find_dev(ap, sdev); - - return ata_device_resume(dev); -} - -int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) -{ - struct ata_port *ap = ata_shost_to_port(sdev->host); - struct ata_device *dev = __ata_scsi_find_dev(ap, sdev); - - return ata_device_suspend(dev, state); -} - -/** - * ata_to_sense_error - convert ATA error to SCSI error - * @id: ATA device number - * @drv_stat: value contained in ATA status register - * @drv_err: value contained in ATA error register - * @sk: the sense key we'll fill out - * @asc: the additional sense code we'll fill out - * @ascq: the additional sense code qualifier we'll fill out - * @verbose: be verbose - * - * Converts an ATA error into a SCSI error. Fill out pointers to - * SK, ASC, and ASCQ bytes for later use in fixed or descriptor - * format sense blocks. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, - u8 *ascq, int verbose) -{ - int i; - - /* Based on the 3ware driver translation table */ - static const unsigned char sense_table[][4] = { - /* BBD|ECC|ID|MAR */ - {0xd1, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command - /* BBD|ECC|ID */ - {0xd0, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command - /* ECC|MC|MARK */ - {0x61, HARDWARE_ERROR, 0x00, 0x00}, // Device fault Hardware error - /* ICRC|ABRT */ /* NB: ICRC & !ABRT is BBD */ - {0x84, ABORTED_COMMAND, 0x47, 0x00}, // Data CRC error SCSI parity error - /* MC|ID|ABRT|TRK0|MARK */ - {0x37, NOT_READY, 0x04, 0x00}, // Unit offline Not ready - /* MCR|MARK */ - {0x09, NOT_READY, 0x04, 0x00}, // Unrecovered disk error Not ready - /* Bad address mark */ - {0x01, MEDIUM_ERROR, 0x13, 0x00}, // Address mark not found Address mark not found for data field - /* TRK0 */ - {0x02, HARDWARE_ERROR, 0x00, 0x00}, // Track 0 not found Hardware error - /* Abort & !ICRC */ - {0x04, ABORTED_COMMAND, 0x00, 0x00}, // Aborted command Aborted command - /* Media change request */ - {0x08, NOT_READY, 0x04, 0x00}, // Media change request FIXME: faking offline - /* SRV */ - {0x10, ABORTED_COMMAND, 0x14, 0x00}, // ID not found Recorded entity not found - /* Media change */ - {0x08, NOT_READY, 0x04, 0x00}, // Media change FIXME: faking offline - /* ECC */ - {0x40, MEDIUM_ERROR, 0x11, 0x04}, // Uncorrectable ECC error Unrecovered read error - /* BBD - block marked bad */ - {0x80, MEDIUM_ERROR, 0x11, 0x04}, // Block marked bad Medium error, unrecovered read error - {0xFF, 0xFF, 0xFF, 0xFF}, // END mark - }; - static const unsigned char stat_table[][4] = { - /* Must be first because BUSY means no other bits valid */ - {0x80, ABORTED_COMMAND, 0x47, 0x00}, // Busy, fake parity for now - {0x20, HARDWARE_ERROR, 0x00, 0x00}, // Device fault - {0x08, ABORTED_COMMAND, 0x47, 0x00}, // Timed out in xfer, fake parity for now - {0x04, RECOVERED_ERROR, 0x11, 0x00}, // Recovered ECC error Medium error, recovered - {0xFF, 0xFF, 0xFF, 0xFF}, // END mark - }; - - /* - * Is this an error we can process/parse - */ - if (drv_stat & ATA_BUSY) { - drv_err = 0; /* Ignore the err bits, they're invalid */ - } - - if (drv_err) { - /* Look for drv_err */ - for (i = 0; sense_table[i][0] != 0xFF; i++) { - /* Look for best matches first */ - if ((sense_table[i][0] & drv_err) == - sense_table[i][0]) { - *sk = sense_table[i][1]; - *asc = sense_table[i][2]; - *ascq = sense_table[i][3]; - goto translate_done; - } - } - /* No immediate match */ - if (verbose) - printk(KERN_WARNING "ata%u: no sense translation for " - "error 0x%02x\n", id, drv_err); - } - - /* Fall back to interpreting status bits */ - for (i = 0; stat_table[i][0] != 0xFF; i++) { - if (stat_table[i][0] & drv_stat) { - *sk = stat_table[i][1]; - *asc = stat_table[i][2]; - *ascq = stat_table[i][3]; - goto translate_done; - } - } - /* No error? Undecoded? */ - if (verbose) - printk(KERN_WARNING "ata%u: no sense translation for " - "status: 0x%02x\n", id, drv_stat); - - /* We need a sensible error return here, which is tricky, and one - that won't cause people to do things like return a disk wrongly */ - *sk = ABORTED_COMMAND; - *asc = 0x00; - *ascq = 0x00; - - translate_done: - if (verbose) - printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x " - "to SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", - id, drv_stat, drv_err, *sk, *asc, *ascq); - return; -} - -/* - * ata_gen_ata_desc_sense - Generate check condition sense block. - * @qc: Command that completed. - * - * This function is specific to the ATA descriptor format sense - * block specified for the ATA pass through commands. Regardless - * of whether the command errored or not, return a sense - * block. Copy all controller registers into the sense - * block. Clear sense key, ASC & ASCQ if there is no error. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) -{ - struct scsi_cmnd *cmd = qc->scsicmd; - struct ata_taskfile *tf = &qc->result_tf; - unsigned char *sb = cmd->sense_buffer; - unsigned char *desc = sb + 8; - int verbose = qc->ap->ops->error_handler == NULL; - - memset(sb, 0, SCSI_SENSE_BUFFERSIZE); - - cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; - - /* - * Use ata_to_sense_error() to map status register bits - * onto sense key, asc & ascq. - */ - if (qc->err_mask || - tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { - ata_to_sense_error(qc->ap->id, tf->command, tf->feature, - &sb[1], &sb[2], &sb[3], verbose); - sb[1] &= 0x0f; - } - - /* - * Sense data is current and format is descriptor. - */ - sb[0] = 0x72; - - desc[0] = 0x09; - - /* - * Set length of additional sense data. - * Since we only populate descriptor 0, the total - * length is the same (fixed) length as descriptor 0. - */ - desc[1] = sb[7] = 14; - - /* - * Copy registers into sense buffer. - */ - desc[2] = 0x00; - desc[3] = tf->feature; /* == error reg */ - desc[5] = tf->nsect; - desc[7] = tf->lbal; - desc[9] = tf->lbam; - desc[11] = tf->lbah; - desc[12] = tf->device; - desc[13] = tf->command; /* == status reg */ - - /* - * Fill in Extend bit, and the high order bytes - * if applicable. - */ - if (tf->flags & ATA_TFLAG_LBA48) { - desc[2] |= 0x01; - desc[4] = tf->hob_nsect; - desc[6] = tf->hob_lbal; - desc[8] = tf->hob_lbam; - desc[10] = tf->hob_lbah; - } -} - -/** - * ata_gen_fixed_sense - generate a SCSI fixed sense block - * @qc: Command that we are erroring out - * - * Leverage ata_to_sense_error() to give us the codes. Fit our - * LBA in here if there's room. - * - * LOCKING: - * inherited from caller - */ -void ata_gen_fixed_sense(struct ata_queued_cmd *qc) -{ - struct scsi_cmnd *cmd = qc->scsicmd; - struct ata_taskfile *tf = &qc->result_tf; - unsigned char *sb = cmd->sense_buffer; - int verbose = qc->ap->ops->error_handler == NULL; - - memset(sb, 0, SCSI_SENSE_BUFFERSIZE); - - cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; - - /* - * Use ata_to_sense_error() to map status register bits - * onto sense key, asc & ascq. - */ - if (qc->err_mask || - tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { - ata_to_sense_error(qc->ap->id, tf->command, tf->feature, - &sb[2], &sb[12], &sb[13], verbose); - sb[2] &= 0x0f; - } - - sb[0] = 0x70; - sb[7] = 0x0a; - - if (tf->flags & ATA_TFLAG_LBA48) { - /* TODO: find solution for LBA48 descriptors */ - } - - else if (tf->flags & ATA_TFLAG_LBA) { - /* A small (28b) LBA will fit in the 32b info field */ - sb[0] |= 0x80; /* set valid bit */ - sb[3] = tf->device & 0x0f; - sb[4] = tf->lbah; - sb[5] = tf->lbam; - sb[6] = tf->lbal; - } - - else { - /* TODO: C/H/S */ - } -} - -static void ata_scsi_sdev_config(struct scsi_device *sdev) -{ - sdev->use_10_for_rw = 1; - sdev->use_10_for_ms = 1; -} - -static void ata_scsi_dev_config(struct scsi_device *sdev, - struct ata_device *dev) -{ - unsigned int max_sectors; - - /* TODO: 2048 is an arbitrary number, not the - * hardware maximum. This should be increased to - * 65534 when Jens Axboe's patch for dynamically - * determining max_sectors is merged. - */ - max_sectors = ATA_MAX_SECTORS; - if (dev->flags & ATA_DFLAG_LBA48) - max_sectors = ATA_MAX_SECTORS_LBA48; - if (dev->max_sectors) - max_sectors = dev->max_sectors; - - blk_queue_max_sectors(sdev->request_queue, max_sectors); - - /* - * SATA DMA transfers must be multiples of 4 byte, so - * we need to pad ATAPI transfers using an extra sg. - * Decrement max hw segments accordingly. - */ - if (dev->class == ATA_DEV_ATAPI) { - request_queue_t *q = sdev->request_queue; - blk_queue_max_hw_segments(q, q->max_hw_segments - 1); - } - - if (dev->flags & ATA_DFLAG_NCQ) { - int depth; - - depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); - depth = min(ATA_MAX_QUEUE - 1, depth); - scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth); - } -} - -/** - * ata_scsi_slave_config - Set SCSI device attributes - * @sdev: SCSI device to examine - * - * This is called before we actually start reading - * and writing to the device, to configure certain - * SCSI mid-layer behaviors. - * - * LOCKING: - * Defined by SCSI layer. We don't really care. - */ - -int ata_scsi_slave_config(struct scsi_device *sdev) -{ - struct ata_port *ap = ata_shost_to_port(sdev->host); - struct ata_device *dev = __ata_scsi_find_dev(ap, sdev); - - ata_scsi_sdev_config(sdev); - - blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD); - - if (dev) - ata_scsi_dev_config(sdev, dev); - - return 0; /* scsi layer doesn't check return value, sigh */ -} - -/** - * ata_scsi_slave_destroy - SCSI device is about to be destroyed - * @sdev: SCSI device to be destroyed - * - * @sdev is about to be destroyed for hot/warm unplugging. If - * this unplugging was initiated by libata as indicated by NULL - * dev->sdev, this function doesn't have to do anything. - * Otherwise, SCSI layer initiated warm-unplug is in progress. - * Clear dev->sdev, schedule the device for ATA detach and invoke - * EH. - * - * LOCKING: - * Defined by SCSI layer. We don't really care. - */ -void ata_scsi_slave_destroy(struct scsi_device *sdev) -{ - struct ata_port *ap = ata_shost_to_port(sdev->host); - unsigned long flags; - struct ata_device *dev; - - if (!ap->ops->error_handler) - return; - - spin_lock_irqsave(ap->lock, flags); - dev = __ata_scsi_find_dev(ap, sdev); - if (dev && dev->sdev) { - /* SCSI device already in CANCEL state, no need to offline it */ - dev->sdev = NULL; - dev->flags |= ATA_DFLAG_DETACH; - ata_port_schedule_eh(ap); - } - spin_unlock_irqrestore(ap->lock, flags); -} - -/** - * ata_scsi_change_queue_depth - SCSI callback for queue depth config - * @sdev: SCSI device to configure queue depth for - * @queue_depth: new queue depth - * - * This is libata standard hostt->change_queue_depth callback. - * SCSI will call into this callback when user tries to set queue - * depth via sysfs. - * - * LOCKING: - * SCSI layer (we don't care) - * - * RETURNS: - * Newly configured queue depth. - */ -int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth) -{ - struct ata_port *ap = ata_shost_to_port(sdev->host); - struct ata_device *dev; - int max_depth; - - if (queue_depth < 1) - return sdev->queue_depth; - - dev = ata_scsi_find_dev(ap, sdev); - if (!dev || !ata_dev_enabled(dev)) - return sdev->queue_depth; - - max_depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); - max_depth = min(ATA_MAX_QUEUE - 1, max_depth); - if (queue_depth > max_depth) - queue_depth = max_depth; - - scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, queue_depth); - return queue_depth; -} - -/** - * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command - * @qc: Storage for translated ATA taskfile - * @scsicmd: SCSI command to translate - * - * Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY - * (to start). Perhaps these commands should be preceded by - * CHECK POWER MODE to see what power mode the device is already in. - * [See SAT revision 5 at www.t10.org] - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Zero on success, non-zero on error. - */ - -static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, - const u8 *scsicmd) -{ - struct ata_taskfile *tf = &qc->tf; - - tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; - tf->protocol = ATA_PROT_NODATA; - if (scsicmd[1] & 0x1) { - ; /* ignore IMMED bit, violates sat-r05 */ - } - if (scsicmd[4] & 0x2) - goto invalid_fld; /* LOEJ bit set not supported */ - if (((scsicmd[4] >> 4) & 0xf) != 0) - goto invalid_fld; /* power conditions not supported */ - if (scsicmd[4] & 0x1) { - tf->nsect = 1; /* 1 sector, lba=0 */ - - if (qc->dev->flags & ATA_DFLAG_LBA) { - tf->flags |= ATA_TFLAG_LBA; - - tf->lbah = 0x0; - tf->lbam = 0x0; - tf->lbal = 0x0; - tf->device |= ATA_LBA; - } else { - /* CHS */ - tf->lbal = 0x1; /* sect */ - tf->lbam = 0x0; /* cyl low */ - tf->lbah = 0x0; /* cyl high */ - } - - tf->command = ATA_CMD_VERIFY; /* READ VERIFY */ - } else { - tf->nsect = 0; /* time period value (0 implies now) */ - tf->command = ATA_CMD_STANDBY; - /* Consider: ATA STANDBY IMMEDIATE command */ - } - /* - * Standby and Idle condition timers could be implemented but that - * would require libata to implement the Power condition mode page - * and allow the user to change it. Changing mode pages requires - * MODE SELECT to be implemented. - */ - - return 0; - -invalid_fld: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); - /* "Invalid field in cbd" */ - return 1; -} - - -/** - * ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command - * @qc: Storage for translated ATA taskfile - * @scsicmd: SCSI command to translate (ignored) - * - * Sets up an ATA taskfile to issue FLUSH CACHE or - * FLUSH CACHE EXT. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Zero on success, non-zero on error. - */ - -static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) -{ - struct ata_taskfile *tf = &qc->tf; - - tf->flags |= ATA_TFLAG_DEVICE; - tf->protocol = ATA_PROT_NODATA; - - if ((qc->dev->flags & ATA_DFLAG_LBA48) && - (ata_id_has_flush_ext(qc->dev->id))) - tf->command = ATA_CMD_FLUSH_EXT; - else - tf->command = ATA_CMD_FLUSH; - - return 0; -} - -/** - * scsi_6_lba_len - Get LBA and transfer length - * @scsicmd: SCSI command to translate - * - * Calculate LBA and transfer length for 6-byte commands. - * - * RETURNS: - * @plba: the LBA - * @plen: the transfer length - */ - -static void scsi_6_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) -{ - u64 lba = 0; - u32 len = 0; - - VPRINTK("six-byte command\n"); - - lba |= ((u64)scsicmd[2]) << 8; - lba |= ((u64)scsicmd[3]); - - len |= ((u32)scsicmd[4]); - - *plba = lba; - *plen = len; -} - -/** - * scsi_10_lba_len - Get LBA and transfer length - * @scsicmd: SCSI command to translate - * - * Calculate LBA and transfer length for 10-byte commands. - * - * RETURNS: - * @plba: the LBA - * @plen: the transfer length - */ - -static void scsi_10_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) -{ - u64 lba = 0; - u32 len = 0; - - VPRINTK("ten-byte command\n"); - - lba |= ((u64)scsicmd[2]) << 24; - lba |= ((u64)scsicmd[3]) << 16; - lba |= ((u64)scsicmd[4]) << 8; - lba |= ((u64)scsicmd[5]); - - len |= ((u32)scsicmd[7]) << 8; - len |= ((u32)scsicmd[8]); - - *plba = lba; - *plen = len; -} - -/** - * scsi_16_lba_len - Get LBA and transfer length - * @scsicmd: SCSI command to translate - * - * Calculate LBA and transfer length for 16-byte commands. - * - * RETURNS: - * @plba: the LBA - * @plen: the transfer length - */ - -static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) -{ - u64 lba = 0; - u32 len = 0; - - VPRINTK("sixteen-byte command\n"); - - lba |= ((u64)scsicmd[2]) << 56; - lba |= ((u64)scsicmd[3]) << 48; - lba |= ((u64)scsicmd[4]) << 40; - lba |= ((u64)scsicmd[5]) << 32; - lba |= ((u64)scsicmd[6]) << 24; - lba |= ((u64)scsicmd[7]) << 16; - lba |= ((u64)scsicmd[8]) << 8; - lba |= ((u64)scsicmd[9]); - - len |= ((u32)scsicmd[10]) << 24; - len |= ((u32)scsicmd[11]) << 16; - len |= ((u32)scsicmd[12]) << 8; - len |= ((u32)scsicmd[13]); - - *plba = lba; - *plen = len; -} - -/** - * ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one - * @qc: Storage for translated ATA taskfile - * @scsicmd: SCSI command to translate - * - * Converts SCSI VERIFY command to an ATA READ VERIFY command. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Zero on success, non-zero on error. - */ - -static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) -{ - struct ata_taskfile *tf = &qc->tf; - struct ata_device *dev = qc->dev; - u64 dev_sectors = qc->dev->n_sectors; - u64 block; - u32 n_block; - - tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - tf->protocol = ATA_PROT_NODATA; - - if (scsicmd[0] == VERIFY) - scsi_10_lba_len(scsicmd, &block, &n_block); - else if (scsicmd[0] == VERIFY_16) - scsi_16_lba_len(scsicmd, &block, &n_block); - else - goto invalid_fld; - - if (!n_block) - goto nothing_to_do; - if (block >= dev_sectors) - goto out_of_range; - if ((block + n_block) > dev_sectors) - goto out_of_range; - - if (dev->flags & ATA_DFLAG_LBA) { - tf->flags |= ATA_TFLAG_LBA; - - if (lba_28_ok(block, n_block)) { - /* use LBA28 */ - tf->command = ATA_CMD_VERIFY; - tf->device |= (block >> 24) & 0xf; - } else if (lba_48_ok(block, n_block)) { - if (!(dev->flags & ATA_DFLAG_LBA48)) - goto out_of_range; - - /* use LBA48 */ - tf->flags |= ATA_TFLAG_LBA48; - tf->command = ATA_CMD_VERIFY_EXT; - - tf->hob_nsect = (n_block >> 8) & 0xff; - - tf->hob_lbah = (block >> 40) & 0xff; - tf->hob_lbam = (block >> 32) & 0xff; - tf->hob_lbal = (block >> 24) & 0xff; - } else - /* request too large even for LBA48 */ - goto out_of_range; - - tf->nsect = n_block & 0xff; - - tf->lbah = (block >> 16) & 0xff; - tf->lbam = (block >> 8) & 0xff; - tf->lbal = block & 0xff; - - tf->device |= ATA_LBA; - } else { - /* CHS */ - u32 sect, head, cyl, track; - - if (!lba_28_ok(block, n_block)) - goto out_of_range; - - /* Convert LBA to CHS */ - track = (u32)block / dev->sectors; - cyl = track / dev->heads; - head = track % dev->heads; - sect = (u32)block % dev->sectors + 1; - - DPRINTK("block %u track %u cyl %u head %u sect %u\n", - (u32)block, track, cyl, head, sect); - - /* Check whether the converted CHS can fit. - Cylinder: 0-65535 - Head: 0-15 - Sector: 1-255*/ - if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) - goto out_of_range; - - tf->command = ATA_CMD_VERIFY; - tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ - tf->lbal = sect; - tf->lbam = cyl; - tf->lbah = cyl >> 8; - tf->device |= head; - } - - return 0; - -invalid_fld: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); - /* "Invalid field in cbd" */ - return 1; - -out_of_range: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0); - /* "Logical Block Address out of range" */ - return 1; - -nothing_to_do: - qc->scsicmd->result = SAM_STAT_GOOD; - return 1; -} - -/** - * ata_scsi_rw_xlat - Translate SCSI r/w command into an ATA one - * @qc: Storage for translated ATA taskfile - * @scsicmd: SCSI command to translate - * - * Converts any of six SCSI read/write commands into the - * ATA counterpart, including starting sector (LBA), - * sector count, and taking into account the device's LBA48 - * support. - * - * Commands %READ_6, %READ_10, %READ_16, %WRITE_6, %WRITE_10, and - * %WRITE_16 are currently supported. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Zero on success, non-zero on error. - */ - -static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) -{ - struct ata_taskfile *tf = &qc->tf; - struct ata_device *dev = qc->dev; - u64 block; - u32 n_block; - - qc->flags |= ATA_QCFLAG_IO; - tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - - if (scsicmd[0] == WRITE_10 || scsicmd[0] == WRITE_6 || - scsicmd[0] == WRITE_16) - tf->flags |= ATA_TFLAG_WRITE; - - /* Calculate the SCSI LBA, transfer length and FUA. */ - switch (scsicmd[0]) { - case READ_10: - case WRITE_10: - scsi_10_lba_len(scsicmd, &block, &n_block); - if (unlikely(scsicmd[1] & (1 << 3))) - tf->flags |= ATA_TFLAG_FUA; - break; - case READ_6: - case WRITE_6: - scsi_6_lba_len(scsicmd, &block, &n_block); - - /* for 6-byte r/w commands, transfer length 0 - * means 256 blocks of data, not 0 block. - */ - if (!n_block) - n_block = 256; - break; - case READ_16: - case WRITE_16: - scsi_16_lba_len(scsicmd, &block, &n_block); - if (unlikely(scsicmd[1] & (1 << 3))) - tf->flags |= ATA_TFLAG_FUA; - break; - default: - DPRINTK("no-byte command\n"); - goto invalid_fld; - } - - /* Check and compose ATA command */ - if (!n_block) - /* For 10-byte and 16-byte SCSI R/W commands, transfer - * length 0 means transfer 0 block of data. - * However, for ATA R/W commands, sector count 0 means - * 256 or 65536 sectors, not 0 sectors as in SCSI. - * - * WARNING: one or two older ATA drives treat 0 as 0... - */ - goto nothing_to_do; - - if ((dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ) { - /* yay, NCQ */ - if (!lba_48_ok(block, n_block)) - goto out_of_range; - - tf->protocol = ATA_PROT_NCQ; - tf->flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48; - - if (tf->flags & ATA_TFLAG_WRITE) - tf->command = ATA_CMD_FPDMA_WRITE; - else - tf->command = ATA_CMD_FPDMA_READ; - - qc->nsect = n_block; - - tf->nsect = qc->tag << 3; - tf->hob_feature = (n_block >> 8) & 0xff; - tf->feature = n_block & 0xff; - - tf->hob_lbah = (block >> 40) & 0xff; - tf->hob_lbam = (block >> 32) & 0xff; - tf->hob_lbal = (block >> 24) & 0xff; - tf->lbah = (block >> 16) & 0xff; - tf->lbam = (block >> 8) & 0xff; - tf->lbal = block & 0xff; - - tf->device = 1 << 6; - if (tf->flags & ATA_TFLAG_FUA) - tf->device |= 1 << 7; - } else if (dev->flags & ATA_DFLAG_LBA) { - tf->flags |= ATA_TFLAG_LBA; - - if (lba_28_ok(block, n_block)) { - /* use LBA28 */ - tf->device |= (block >> 24) & 0xf; - } else if (lba_48_ok(block, n_block)) { - if (!(dev->flags & ATA_DFLAG_LBA48)) - goto out_of_range; - - /* use LBA48 */ - tf->flags |= ATA_TFLAG_LBA48; - - tf->hob_nsect = (n_block >> 8) & 0xff; - - tf->hob_lbah = (block >> 40) & 0xff; - tf->hob_lbam = (block >> 32) & 0xff; - tf->hob_lbal = (block >> 24) & 0xff; - } else - /* request too large even for LBA48 */ - goto out_of_range; - - if (unlikely(ata_rwcmd_protocol(qc) < 0)) - goto invalid_fld; - - qc->nsect = n_block; - tf->nsect = n_block & 0xff; - - tf->lbah = (block >> 16) & 0xff; - tf->lbam = (block >> 8) & 0xff; - tf->lbal = block & 0xff; - - tf->device |= ATA_LBA; - } else { - /* CHS */ - u32 sect, head, cyl, track; - - /* The request -may- be too large for CHS addressing. */ - if (!lba_28_ok(block, n_block)) - goto out_of_range; - - if (unlikely(ata_rwcmd_protocol(qc) < 0)) - goto invalid_fld; - - /* Convert LBA to CHS */ - track = (u32)block / dev->sectors; - cyl = track / dev->heads; - head = track % dev->heads; - sect = (u32)block % dev->sectors + 1; - - DPRINTK("block %u track %u cyl %u head %u sect %u\n", - (u32)block, track, cyl, head, sect); - - /* Check whether the converted CHS can fit. - Cylinder: 0-65535 - Head: 0-15 - Sector: 1-255*/ - if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) - goto out_of_range; - - qc->nsect = n_block; - tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ - tf->lbal = sect; - tf->lbam = cyl; - tf->lbah = cyl >> 8; - tf->device |= head; - } - - return 0; - -invalid_fld: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); - /* "Invalid field in cbd" */ - return 1; - -out_of_range: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0); - /* "Logical Block Address out of range" */ - return 1; - -nothing_to_do: - qc->scsicmd->result = SAM_STAT_GOOD; - return 1; -} - -static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) -{ - struct scsi_cmnd *cmd = qc->scsicmd; - u8 *cdb = cmd->cmnd; - int need_sense = (qc->err_mask != 0); - - /* We snoop the SET_FEATURES - Write Cache ON/OFF command, and - * schedule EH_REVALIDATE operation to update the IDENTIFY DEVICE - * cache - */ - if (!need_sense && (qc->tf.command == ATA_CMD_SET_FEATURES) && - ((qc->tf.feature == SETFEATURES_WC_ON) || - (qc->tf.feature == SETFEATURES_WC_OFF))) { - qc->ap->eh_info.action |= ATA_EH_REVALIDATE; - ata_port_schedule_eh(qc->ap); - } - - /* For ATA pass thru (SAT) commands, generate a sense block if - * user mandated it or if there's an error. Note that if we - * generate because the user forced us to, a check condition - * is generated and the ATA register values are returned - * whether the command completed successfully or not. If there - * was no error, SK, ASC and ASCQ will all be zero. - */ - if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) && - ((cdb[2] & 0x20) || need_sense)) { - ata_gen_ata_desc_sense(qc); - } else { - if (!need_sense) { - cmd->result = SAM_STAT_GOOD; - } else { - /* TODO: decide which descriptor format to use - * for 48b LBA devices and call that here - * instead of the fixed desc, which is only - * good for smaller LBA (and maybe CHS?) - * devices. - */ - ata_gen_fixed_sense(qc); - } - } - - if (need_sense && !qc->ap->ops->error_handler) - ata_dump_status(qc->ap->id, &qc->result_tf); - - qc->scsidone(cmd); - - ata_qc_free(qc); -} - -/** - * ata_scmd_need_defer - Check whether we need to defer scmd - * @dev: ATA device to which the command is addressed - * @is_io: Is the command IO (and thus possibly NCQ)? - * - * NCQ and non-NCQ commands cannot run together. As upper layer - * only knows the queue depth, we are responsible for maintaining - * exclusion. This function checks whether a new command can be - * issued to @dev. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * 1 if deferring is needed, 0 otherwise. - */ -static int ata_scmd_need_defer(struct ata_device *dev, int is_io) -{ - struct ata_port *ap = dev->ap; - - if (!(dev->flags & ATA_DFLAG_NCQ)) - return 0; - - if (is_io) { - if (!ata_tag_valid(ap->active_tag)) - return 0; - } else { - if (!ata_tag_valid(ap->active_tag) && !ap->sactive) - return 0; - } - return 1; -} - -/** - * ata_scsi_translate - Translate then issue SCSI command to ATA device - * @dev: ATA device to which the command is addressed - * @cmd: SCSI command to execute - * @done: SCSI command completion function - * @xlat_func: Actor which translates @cmd to an ATA taskfile - * - * Our ->queuecommand() function has decided that the SCSI - * command issued can be directly translated into an ATA - * command, rather than handled internally. - * - * This function sets up an ata_queued_cmd structure for the - * SCSI command, and sends that ata_queued_cmd to the hardware. - * - * The xlat_func argument (actor) returns 0 if ready to execute - * ATA command, else 1 to finish translation. If 1 is returned - * then cmd->result (and possibly cmd->sense_buffer) are assumed - * to be set reflecting an error condition or clean (early) - * termination. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * 0 on success, SCSI_ML_QUEUE_DEVICE_BUSY if the command - * needs to be deferred. - */ -static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *), - ata_xlat_func_t xlat_func) -{ - struct ata_queued_cmd *qc; - u8 *scsicmd = cmd->cmnd; - int is_io = xlat_func == ata_scsi_rw_xlat; - - VPRINTK("ENTER\n"); - - if (unlikely(ata_scmd_need_defer(dev, is_io))) - goto defer; - - qc = ata_scsi_qc_new(dev, cmd, done); - if (!qc) - goto err_mem; - - /* data is present; dma-map it */ - if (cmd->sc_data_direction == DMA_FROM_DEVICE || - cmd->sc_data_direction == DMA_TO_DEVICE) { - if (unlikely(cmd->request_bufflen < 1)) { - ata_dev_printk(dev, KERN_WARNING, - "WARNING: zero len r/w req\n"); - goto err_did; - } - - if (cmd->use_sg) - ata_sg_init(qc, cmd->request_buffer, cmd->use_sg); - else - ata_sg_init_one(qc, cmd->request_buffer, - cmd->request_bufflen); - - qc->dma_dir = cmd->sc_data_direction; - } - - qc->complete_fn = ata_scsi_qc_complete; - - if (xlat_func(qc, scsicmd)) - goto early_finish; - - /* select device, send command to hardware */ - ata_qc_issue(qc); - - VPRINTK("EXIT\n"); - return 0; - -early_finish: - ata_qc_free(qc); - done(cmd); - DPRINTK("EXIT - early finish (good or error)\n"); - return 0; - -err_did: - ata_qc_free(qc); -err_mem: - cmd->result = (DID_ERROR << 16); - done(cmd); - DPRINTK("EXIT - internal\n"); - return 0; - -defer: - DPRINTK("EXIT - defer\n"); - return SCSI_MLQUEUE_DEVICE_BUSY; -} - -/** - * ata_scsi_rbuf_get - Map response buffer. - * @cmd: SCSI command containing buffer to be mapped. - * @buf_out: Pointer to mapped area. - * - * Maps buffer contained within SCSI command @cmd. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Length of response buffer. - */ - -static unsigned int ata_scsi_rbuf_get(struct scsi_cmnd *cmd, u8 **buf_out) -{ - u8 *buf; - unsigned int buflen; - - if (cmd->use_sg) { - struct scatterlist *sg; - - sg = (struct scatterlist *) cmd->request_buffer; - buf = kmap_atomic(sg->page, KM_USER0) + sg->offset; - buflen = sg->length; - } else { - buf = cmd->request_buffer; - buflen = cmd->request_bufflen; - } - - *buf_out = buf; - return buflen; -} - -/** - * ata_scsi_rbuf_put - Unmap response buffer. - * @cmd: SCSI command containing buffer to be unmapped. - * @buf: buffer to unmap - * - * Unmaps response buffer contained within @cmd. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, u8 *buf) -{ - if (cmd->use_sg) { - struct scatterlist *sg; - - sg = (struct scatterlist *) cmd->request_buffer; - kunmap_atomic(buf - sg->offset, KM_USER0); - } -} - -/** - * ata_scsi_rbuf_fill - wrapper for SCSI command simulators - * @args: device IDENTIFY data / SCSI command of interest. - * @actor: Callback hook for desired SCSI command simulator - * - * Takes care of the hard work of simulating a SCSI command... - * Mapping the response buffer, calling the command's handler, - * and handling the handler's return value. This return value - * indicates whether the handler wishes the SCSI command to be - * completed successfully (0), or not (in which case cmd->result - * and sense buffer are assumed to be set). - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -void ata_scsi_rbuf_fill(struct ata_scsi_args *args, - unsigned int (*actor) (struct ata_scsi_args *args, - u8 *rbuf, unsigned int buflen)) -{ - u8 *rbuf; - unsigned int buflen, rc; - struct scsi_cmnd *cmd = args->cmd; - - buflen = ata_scsi_rbuf_get(cmd, &rbuf); - memset(rbuf, 0, buflen); - rc = actor(args, rbuf, buflen); - ata_scsi_rbuf_put(cmd, rbuf); - - if (rc == 0) - cmd->result = SAM_STAT_GOOD; - args->done(cmd); -} - -/** - * ata_scsiop_inq_std - Simulate INQUIRY command - * @args: device IDENTIFY data / SCSI command of interest. - * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. - * @buflen: Response buffer length. - * - * Returns standard device identification data associated - * with non-VPD INQUIRY command output. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen) -{ - u8 hdr[] = { - TYPE_DISK, - 0, - 0x5, /* claim SPC-3 version compatibility */ - 2, - 95 - 4 - }; - - /* set scsi removeable (RMB) bit per ata bit */ - if (ata_id_removeable(args->id)) - hdr[1] |= (1 << 7); - - VPRINTK("ENTER\n"); - - memcpy(rbuf, hdr, sizeof(hdr)); - - if (buflen > 35) { - memcpy(&rbuf[8], "ATA ", 8); - ata_id_string(args->id, &rbuf[16], ATA_ID_PROD_OFS, 16); - ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV_OFS, 4); - if (rbuf[32] == 0 || rbuf[32] == ' ') - memcpy(&rbuf[32], "n/a ", 4); - } - - if (buflen > 63) { - const u8 versions[] = { - 0x60, /* SAM-3 (no version claimed) */ - - 0x03, - 0x20, /* SBC-2 (no version claimed) */ - - 0x02, - 0x60 /* SPC-3 (no version claimed) */ - }; - - memcpy(rbuf + 59, versions, sizeof(versions)); - } - - return 0; -} - -/** - * ata_scsiop_inq_00 - Simulate INQUIRY VPD page 0, list of pages - * @args: device IDENTIFY data / SCSI command of interest. - * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. - * @buflen: Response buffer length. - * - * Returns list of inquiry VPD pages available. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen) -{ - const u8 pages[] = { - 0x00, /* page 0x00, this page */ - 0x80, /* page 0x80, unit serial no page */ - 0x83 /* page 0x83, device ident page */ - }; - rbuf[3] = sizeof(pages); /* number of supported VPD pages */ - - if (buflen > 6) - memcpy(rbuf + 4, pages, sizeof(pages)); - - return 0; -} - -/** - * ata_scsiop_inq_80 - Simulate INQUIRY VPD page 80, device serial number - * @args: device IDENTIFY data / SCSI command of interest. - * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. - * @buflen: Response buffer length. - * - * Returns ATA device serial number. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen) -{ - const u8 hdr[] = { - 0, - 0x80, /* this page code */ - 0, - ATA_SERNO_LEN, /* page len */ - }; - memcpy(rbuf, hdr, sizeof(hdr)); - - if (buflen > (ATA_SERNO_LEN + 4 - 1)) - ata_id_string(args->id, (unsigned char *) &rbuf[4], - ATA_ID_SERNO_OFS, ATA_SERNO_LEN); - - return 0; -} - -/** - * ata_scsiop_inq_83 - Simulate INQUIRY VPD page 83, device identity - * @args: device IDENTIFY data / SCSI command of interest. - * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. - * @buflen: Response buffer length. - * - * Yields two logical unit device identification designators: - * - vendor specific ASCII containing the ATA serial number - * - SAT defined "t10 vendor id based" containing ASCII vendor - * name ("ATA "), model and serial numbers. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen) -{ - int num; - const int sat_model_serial_desc_len = 68; - const int ata_model_byte_len = 40; - - rbuf[1] = 0x83; /* this page code */ - num = 4; - - if (buflen > (ATA_SERNO_LEN + num + 3)) { - /* piv=0, assoc=lu, code_set=ACSII, designator=vendor */ - rbuf[num + 0] = 2; - rbuf[num + 3] = ATA_SERNO_LEN; - num += 4; - ata_id_string(args->id, (unsigned char *) rbuf + num, - ATA_ID_SERNO_OFS, ATA_SERNO_LEN); - num += ATA_SERNO_LEN; - } - if (buflen > (sat_model_serial_desc_len + num + 3)) { - /* SAT defined lu model and serial numbers descriptor */ - /* piv=0, assoc=lu, code_set=ACSII, designator=t10 vendor id */ - rbuf[num + 0] = 2; - rbuf[num + 1] = 1; - rbuf[num + 3] = sat_model_serial_desc_len; - num += 4; - memcpy(rbuf + num, "ATA ", 8); - num += 8; - ata_id_string(args->id, (unsigned char *) rbuf + num, - ATA_ID_PROD_OFS, ata_model_byte_len); - num += ata_model_byte_len; - ata_id_string(args->id, (unsigned char *) rbuf + num, - ATA_ID_SERNO_OFS, ATA_SERNO_LEN); - num += ATA_SERNO_LEN; - } - rbuf[3] = num - 4; /* page len (assume less than 256 bytes) */ - return 0; -} - -/** - * ata_scsiop_noop - Command handler that simply returns success. - * @args: device IDENTIFY data / SCSI command of interest. - * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. - * @buflen: Response buffer length. - * - * No operation. Simply returns success to caller, to indicate - * that the caller should successfully complete this SCSI command. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen) -{ - VPRINTK("ENTER\n"); - return 0; -} - -/** - * ata_msense_push - Push data onto MODE SENSE data output buffer - * @ptr_io: (input/output) Location to store more output data - * @last: End of output data buffer - * @buf: Pointer to BLOB being added to output buffer - * @buflen: Length of BLOB - * - * Store MODE SENSE data on an output buffer. - * - * LOCKING: - * None. - */ - -static void ata_msense_push(u8 **ptr_io, const u8 *last, - const u8 *buf, unsigned int buflen) -{ - u8 *ptr = *ptr_io; - - if ((ptr + buflen - 1) > last) - return; - - memcpy(ptr, buf, buflen); - - ptr += buflen; - - *ptr_io = ptr; -} - -/** - * ata_msense_caching - Simulate MODE SENSE caching info page - * @id: device IDENTIFY data - * @ptr_io: (input/output) Location to store more output data - * @last: End of output data buffer - * - * Generate a caching info page, which conditionally indicates - * write caching to the SCSI layer, depending on device - * capabilities. - * - * LOCKING: - * None. - */ - -static unsigned int ata_msense_caching(u16 *id, u8 **ptr_io, - const u8 *last) -{ - u8 page[CACHE_MPAGE_LEN]; - - memcpy(page, def_cache_mpage, sizeof(page)); - if (ata_id_wcache_enabled(id)) - page[2] |= (1 << 2); /* write cache enable */ - if (!ata_id_rahead_enabled(id)) - page[12] |= (1 << 5); /* disable read ahead */ - - ata_msense_push(ptr_io, last, page, sizeof(page)); - return sizeof(page); -} - -/** - * ata_msense_ctl_mode - Simulate MODE SENSE control mode page - * @dev: Device associated with this MODE SENSE command - * @ptr_io: (input/output) Location to store more output data - * @last: End of output data buffer - * - * Generate a generic MODE SENSE control mode page. - * - * LOCKING: - * None. - */ - -static unsigned int ata_msense_ctl_mode(u8 **ptr_io, const u8 *last) -{ - ata_msense_push(ptr_io, last, def_control_mpage, - sizeof(def_control_mpage)); - return sizeof(def_control_mpage); -} - -/** - * ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page - * @dev: Device associated with this MODE SENSE command - * @ptr_io: (input/output) Location to store more output data - * @last: End of output data buffer - * - * Generate a generic MODE SENSE r/w error recovery page. - * - * LOCKING: - * None. - */ - -static unsigned int ata_msense_rw_recovery(u8 **ptr_io, const u8 *last) -{ - - ata_msense_push(ptr_io, last, def_rw_recovery_mpage, - sizeof(def_rw_recovery_mpage)); - return sizeof(def_rw_recovery_mpage); -} - -/* - * We can turn this into a real blacklist if it's needed, for now just - * blacklist any Maxtor BANC1G10 revision firmware - */ -static int ata_dev_supports_fua(u16 *id) -{ - unsigned char model[41], fw[9]; - - if (!libata_fua) - return 0; - if (!ata_id_has_fua(id)) - return 0; - - ata_id_c_string(id, model, ATA_ID_PROD_OFS, sizeof(model)); - ata_id_c_string(id, fw, ATA_ID_FW_REV_OFS, sizeof(fw)); - - if (strcmp(model, "Maxtor")) - return 1; - if (strcmp(fw, "BANC1G10")) - return 1; - - return 0; /* blacklisted */ -} - -/** - * ata_scsiop_mode_sense - Simulate MODE SENSE 6, 10 commands - * @args: device IDENTIFY data / SCSI command of interest. - * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. - * @buflen: Response buffer length. - * - * Simulate MODE SENSE commands. Assume this is invoked for direct - * access devices (e.g. disks) only. There should be no block - * descriptor for other device types. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen) -{ - struct ata_device *dev = args->dev; - u8 *scsicmd = args->cmd->cmnd, *p, *last; - const u8 sat_blk_desc[] = { - 0, 0, 0, 0, /* number of blocks: sat unspecified */ - 0, - 0, 0x2, 0x0 /* block length: 512 bytes */ - }; - u8 pg, spg; - unsigned int ebd, page_control, six_byte, output_len, alloc_len, minlen; - u8 dpofua; - - VPRINTK("ENTER\n"); - - six_byte = (scsicmd[0] == MODE_SENSE); - ebd = !(scsicmd[1] & 0x8); /* dbd bit inverted == edb */ - /* - * LLBA bit in msense(10) ignored (compliant) - */ - - page_control = scsicmd[2] >> 6; - switch (page_control) { - case 0: /* current */ - break; /* supported */ - case 3: /* saved */ - goto saving_not_supp; - case 1: /* changeable */ - case 2: /* defaults */ - default: - goto invalid_fld; - } - - if (six_byte) { - output_len = 4 + (ebd ? 8 : 0); - alloc_len = scsicmd[4]; - } else { - output_len = 8 + (ebd ? 8 : 0); - alloc_len = (scsicmd[7] << 8) + scsicmd[8]; - } - minlen = (alloc_len < buflen) ? alloc_len : buflen; - - p = rbuf + output_len; - last = rbuf + minlen - 1; - - pg = scsicmd[2] & 0x3f; - spg = scsicmd[3]; - /* - * No mode subpages supported (yet) but asking for _all_ - * subpages may be valid - */ - if (spg && (spg != ALL_SUB_MPAGES)) - goto invalid_fld; - - switch(pg) { - case RW_RECOVERY_MPAGE: - output_len += ata_msense_rw_recovery(&p, last); - break; - - case CACHE_MPAGE: - output_len += ata_msense_caching(args->id, &p, last); - break; - - case CONTROL_MPAGE: { - output_len += ata_msense_ctl_mode(&p, last); - break; - } - - case ALL_MPAGES: - output_len += ata_msense_rw_recovery(&p, last); - output_len += ata_msense_caching(args->id, &p, last); - output_len += ata_msense_ctl_mode(&p, last); - break; - - default: /* invalid page code */ - goto invalid_fld; - } - - if (minlen < 1) - return 0; - - dpofua = 0; - if (ata_dev_supports_fua(args->id) && (dev->flags & ATA_DFLAG_LBA48) && - (!(dev->flags & ATA_DFLAG_PIO) || dev->multi_count)) - dpofua = 1 << 4; - - if (six_byte) { - output_len--; - rbuf[0] = output_len; - if (minlen > 2) - rbuf[2] |= dpofua; - if (ebd) { - if (minlen > 3) - rbuf[3] = sizeof(sat_blk_desc); - if (minlen > 11) - memcpy(rbuf + 4, sat_blk_desc, - sizeof(sat_blk_desc)); - } - } else { - output_len -= 2; - rbuf[0] = output_len >> 8; - if (minlen > 1) - rbuf[1] = output_len; - if (minlen > 3) - rbuf[3] |= dpofua; - if (ebd) { - if (minlen > 7) - rbuf[7] = sizeof(sat_blk_desc); - if (minlen > 15) - memcpy(rbuf + 8, sat_blk_desc, - sizeof(sat_blk_desc)); - } - } - return 0; - -invalid_fld: - ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x24, 0x0); - /* "Invalid field in cbd" */ - return 1; - -saving_not_supp: - ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x39, 0x0); - /* "Saving parameters not supported" */ - return 1; -} - -/** - * ata_scsiop_read_cap - Simulate READ CAPACITY[ 16] commands - * @args: device IDENTIFY data / SCSI command of interest. - * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. - * @buflen: Response buffer length. - * - * Simulate READ CAPACITY commands. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen) -{ - u64 n_sectors; - u32 tmp; - - VPRINTK("ENTER\n"); - - if (ata_id_has_lba(args->id)) { - if (ata_id_has_lba48(args->id)) - n_sectors = ata_id_u64(args->id, 100); - else - n_sectors = ata_id_u32(args->id, 60); - } else { - /* CHS default translation */ - n_sectors = args->id[1] * args->id[3] * args->id[6]; - - if (ata_id_current_chs_valid(args->id)) - /* CHS current translation */ - n_sectors = ata_id_u32(args->id, 57); - } - - n_sectors--; /* ATA TotalUserSectors - 1 */ - - if (args->cmd->cmnd[0] == READ_CAPACITY) { - if( n_sectors >= 0xffffffffULL ) - tmp = 0xffffffff ; /* Return max count on overflow */ - else - tmp = n_sectors ; - - /* sector count, 32-bit */ - rbuf[0] = tmp >> (8 * 3); - rbuf[1] = tmp >> (8 * 2); - rbuf[2] = tmp >> (8 * 1); - rbuf[3] = tmp; - - /* sector size */ - tmp = ATA_SECT_SIZE; - rbuf[6] = tmp >> 8; - rbuf[7] = tmp; - - } else { - /* sector count, 64-bit */ - tmp = n_sectors >> (8 * 4); - rbuf[2] = tmp >> (8 * 3); - rbuf[3] = tmp >> (8 * 2); - rbuf[4] = tmp >> (8 * 1); - rbuf[5] = tmp; - tmp = n_sectors; - rbuf[6] = tmp >> (8 * 3); - rbuf[7] = tmp >> (8 * 2); - rbuf[8] = tmp >> (8 * 1); - rbuf[9] = tmp; - - /* sector size */ - tmp = ATA_SECT_SIZE; - rbuf[12] = tmp >> 8; - rbuf[13] = tmp; - } - - return 0; -} - -/** - * ata_scsiop_report_luns - Simulate REPORT LUNS command - * @args: device IDENTIFY data / SCSI command of interest. - * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. - * @buflen: Response buffer length. - * - * Simulate REPORT LUNS command. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen) -{ - VPRINTK("ENTER\n"); - rbuf[3] = 8; /* just one lun, LUN 0, size 8 bytes */ - - return 0; -} - -/** - * ata_scsi_set_sense - Set SCSI sense data and status - * @cmd: SCSI request to be handled - * @sk: SCSI-defined sense key - * @asc: SCSI-defined additional sense code - * @ascq: SCSI-defined additional sense code qualifier - * - * Helper function that builds a valid fixed format, current - * response code and the given sense key (sk), additional sense - * code (asc) and additional sense code qualifier (ascq) with - * a SCSI command status of %SAM_STAT_CHECK_CONDITION and - * DRIVER_SENSE set in the upper bits of scsi_cmnd::result . - * - * LOCKING: - * Not required - */ - -void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq) -{ - cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; - - cmd->sense_buffer[0] = 0x70; /* fixed format, current */ - cmd->sense_buffer[2] = sk; - cmd->sense_buffer[7] = 18 - 8; /* additional sense length */ - cmd->sense_buffer[12] = asc; - cmd->sense_buffer[13] = ascq; -} - -/** - * ata_scsi_badcmd - End a SCSI request with an error - * @cmd: SCSI request to be handled - * @done: SCSI command completion function - * @asc: SCSI-defined additional sense code - * @ascq: SCSI-defined additional sense code qualifier - * - * Helper function that completes a SCSI command with - * %SAM_STAT_CHECK_CONDITION, with a sense key %ILLEGAL_REQUEST - * and the specified additional sense codes. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq) -{ - DPRINTK("ENTER\n"); - ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, asc, ascq); - - done(cmd); -} - -static void atapi_sense_complete(struct ata_queued_cmd *qc) -{ - if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0)) { - /* FIXME: not quite right; we don't want the - * translation of taskfile registers into - * a sense descriptors, since that's only - * correct for ATA, not ATAPI - */ - ata_gen_ata_desc_sense(qc); - } - - qc->scsidone(qc->scsicmd); - ata_qc_free(qc); -} - -/* is it pointless to prefer PIO for "safety reasons"? */ -static inline int ata_pio_use_silly(struct ata_port *ap) -{ - return (ap->flags & ATA_FLAG_PIO_DMA); -} - -static void atapi_request_sense(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct scsi_cmnd *cmd = qc->scsicmd; - - DPRINTK("ATAPI request sense\n"); - - /* FIXME: is this needed? */ - memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); - - ap->ops->tf_read(ap, &qc->tf); - - /* fill these in, for the case where they are -not- overwritten */ - cmd->sense_buffer[0] = 0x70; - cmd->sense_buffer[2] = qc->tf.feature >> 4; - - ata_qc_reinit(qc); - - ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer)); - qc->dma_dir = DMA_FROM_DEVICE; - - memset(&qc->cdb, 0, qc->dev->cdb_len); - qc->cdb[0] = REQUEST_SENSE; - qc->cdb[4] = SCSI_SENSE_BUFFERSIZE; - - qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - qc->tf.command = ATA_CMD_PACKET; - - if (ata_pio_use_silly(ap)) { - qc->tf.protocol = ATA_PROT_ATAPI_DMA; - qc->tf.feature |= ATAPI_PKT_DMA; - } else { - qc->tf.protocol = ATA_PROT_ATAPI; - qc->tf.lbam = (8 * 1024) & 0xff; - qc->tf.lbah = (8 * 1024) >> 8; - } - qc->nbytes = SCSI_SENSE_BUFFERSIZE; - - qc->complete_fn = atapi_sense_complete; - - ata_qc_issue(qc); - - DPRINTK("EXIT\n"); -} - -static void atapi_qc_complete(struct ata_queued_cmd *qc) -{ - struct scsi_cmnd *cmd = qc->scsicmd; - unsigned int err_mask = qc->err_mask; - - VPRINTK("ENTER, err_mask 0x%X\n", err_mask); - - /* handle completion from new EH */ - if (unlikely(qc->ap->ops->error_handler && - (err_mask || qc->flags & ATA_QCFLAG_SENSE_VALID))) { - - if (!(qc->flags & ATA_QCFLAG_SENSE_VALID)) { - /* FIXME: not quite right; we don't want the - * translation of taskfile registers into a - * sense descriptors, since that's only - * correct for ATA, not ATAPI - */ - ata_gen_ata_desc_sense(qc); - } - - qc->scsicmd->result = SAM_STAT_CHECK_CONDITION; - qc->scsidone(cmd); - ata_qc_free(qc); - return; - } - - /* successful completion or old EH failure path */ - if (unlikely(err_mask & AC_ERR_DEV)) { - cmd->result = SAM_STAT_CHECK_CONDITION; - atapi_request_sense(qc); - return; - } else if (unlikely(err_mask)) { - /* FIXME: not quite right; we don't want the - * translation of taskfile registers into - * a sense descriptors, since that's only - * correct for ATA, not ATAPI - */ - ata_gen_ata_desc_sense(qc); - } else { - u8 *scsicmd = cmd->cmnd; - - if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) { - u8 *buf = NULL; - unsigned int buflen; - - buflen = ata_scsi_rbuf_get(cmd, &buf); - - /* ATAPI devices typically report zero for their SCSI version, - * and sometimes deviate from the spec WRT response data - * format. If SCSI version is reported as zero like normal, - * then we make the following fixups: 1) Fake MMC-5 version, - * to indicate to the Linux scsi midlayer this is a modern - * device. 2) Ensure response data format / ATAPI information - * are always correct. - */ - if (buf[2] == 0) { - buf[2] = 0x5; - buf[3] = 0x32; - } - - ata_scsi_rbuf_put(cmd, buf); - } - - cmd->result = SAM_STAT_GOOD; - } - - qc->scsidone(cmd); - ata_qc_free(qc); -} -/** - * atapi_xlat - Initialize PACKET taskfile - * @qc: command structure to be initialized - * @scsicmd: SCSI CDB associated with this PACKET command - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Zero on success, non-zero on failure. - */ - -static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) -{ - struct scsi_cmnd *cmd = qc->scsicmd; - struct ata_device *dev = qc->dev; - int using_pio = (dev->flags & ATA_DFLAG_PIO); - int nodata = (cmd->sc_data_direction == DMA_NONE); - - if (!using_pio) - /* Check whether ATAPI DMA is safe */ - if (ata_check_atapi_dma(qc)) - using_pio = 1; - - memcpy(&qc->cdb, scsicmd, dev->cdb_len); - - qc->complete_fn = atapi_qc_complete; - - qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - if (cmd->sc_data_direction == DMA_TO_DEVICE) { - qc->tf.flags |= ATA_TFLAG_WRITE; - DPRINTK("direction: write\n"); - } - - qc->tf.command = ATA_CMD_PACKET; - - /* no data, or PIO data xfer */ - if (using_pio || nodata) { - if (nodata) - qc->tf.protocol = ATA_PROT_ATAPI_NODATA; - else - qc->tf.protocol = ATA_PROT_ATAPI; - qc->tf.lbam = (8 * 1024) & 0xff; - qc->tf.lbah = (8 * 1024) >> 8; - } - - /* DMA data xfer */ - else { - qc->tf.protocol = ATA_PROT_ATAPI_DMA; - qc->tf.feature |= ATAPI_PKT_DMA; - - if (atapi_dmadir && (cmd->sc_data_direction != DMA_TO_DEVICE)) - /* some SATA bridges need us to indicate data xfer direction */ - qc->tf.feature |= ATAPI_DMADIR; - } - - qc->nbytes = cmd->request_bufflen; - - return 0; -} - -static struct ata_device * ata_find_dev(struct ata_port *ap, int id) -{ - if (likely(id < ATA_MAX_DEVICES)) - return &ap->device[id]; - return NULL; -} - -static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap, - const struct scsi_device *scsidev) -{ - /* skip commands not addressed to targets we simulate */ - if (unlikely(scsidev->channel || scsidev->lun)) - return NULL; - - return ata_find_dev(ap, scsidev->id); -} - -/** - * ata_scsi_dev_enabled - determine if device is enabled - * @dev: ATA device - * - * Determine if commands should be sent to the specified device. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * 0 if commands are not allowed / 1 if commands are allowed - */ - -static int ata_scsi_dev_enabled(struct ata_device *dev) -{ - if (unlikely(!ata_dev_enabled(dev))) - return 0; - - if (!atapi_enabled || (dev->ap->flags & ATA_FLAG_NO_ATAPI)) { - if (unlikely(dev->class == ATA_DEV_ATAPI)) { - ata_dev_printk(dev, KERN_WARNING, - "WARNING: ATAPI is %s, device ignored.\n", - atapi_enabled ? "not supported with this driver" : "disabled"); - return 0; - } - } - - return 1; -} - -/** - * ata_scsi_find_dev - lookup ata_device from scsi_cmnd - * @ap: ATA port to which the device is attached - * @scsidev: SCSI device from which we derive the ATA device - * - * Given various information provided in struct scsi_cmnd, - * map that onto an ATA bus, and using that mapping - * determine which ata_device is associated with the - * SCSI command to be sent. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * Associated ATA device, or %NULL if not found. - */ -static struct ata_device * -ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev) -{ - struct ata_device *dev = __ata_scsi_find_dev(ap, scsidev); - - if (unlikely(!dev || !ata_scsi_dev_enabled(dev))) - return NULL; - - return dev; -} - -/* - * ata_scsi_map_proto - Map pass-thru protocol value to taskfile value. - * @byte1: Byte 1 from pass-thru CDB. - * - * RETURNS: - * ATA_PROT_UNKNOWN if mapping failed/unimplemented, protocol otherwise. - */ -static u8 -ata_scsi_map_proto(u8 byte1) -{ - switch((byte1 & 0x1e) >> 1) { - case 3: /* Non-data */ - return ATA_PROT_NODATA; - - case 6: /* DMA */ - return ATA_PROT_DMA; - - case 4: /* PIO Data-in */ - case 5: /* PIO Data-out */ - return ATA_PROT_PIO; - - case 10: /* Device Reset */ - case 0: /* Hard Reset */ - case 1: /* SRST */ - case 2: /* Bus Idle */ - case 7: /* Packet */ - case 8: /* DMA Queued */ - case 9: /* Device Diagnostic */ - case 11: /* UDMA Data-in */ - case 12: /* UDMA Data-Out */ - case 13: /* FPDMA */ - default: /* Reserved */ - break; - } - - return ATA_PROT_UNKNOWN; -} - -/** - * ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile - * @qc: command structure to be initialized - * @scsicmd: SCSI command to convert - * - * Handles either 12 or 16-byte versions of the CDB. - * - * RETURNS: - * Zero on success, non-zero on failure. - */ -static unsigned int -ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) -{ - struct ata_taskfile *tf = &(qc->tf); - struct scsi_cmnd *cmd = qc->scsicmd; - struct ata_device *dev = qc->dev; - - if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN) - goto invalid_fld; - - /* We may not issue DMA commands if no DMA mode is set */ - if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0) - goto invalid_fld; - - if (scsicmd[1] & 0xe0) - /* PIO multi not supported yet */ - goto invalid_fld; - - /* - * 12 and 16 byte CDBs use different offsets to - * provide the various register values. - */ - if (scsicmd[0] == ATA_16) { - /* - * 16-byte CDB - may contain extended commands. - * - * If that is the case, copy the upper byte register values. - */ - if (scsicmd[1] & 0x01) { - tf->hob_feature = scsicmd[3]; - tf->hob_nsect = scsicmd[5]; - tf->hob_lbal = scsicmd[7]; - tf->hob_lbam = scsicmd[9]; - tf->hob_lbah = scsicmd[11]; - tf->flags |= ATA_TFLAG_LBA48; - } else - tf->flags &= ~ATA_TFLAG_LBA48; - - /* - * Always copy low byte, device and command registers. - */ - tf->feature = scsicmd[4]; - tf->nsect = scsicmd[6]; - tf->lbal = scsicmd[8]; - tf->lbam = scsicmd[10]; - tf->lbah = scsicmd[12]; - tf->device = scsicmd[13]; - tf->command = scsicmd[14]; - } else { - /* - * 12-byte CDB - incapable of extended commands. - */ - tf->flags &= ~ATA_TFLAG_LBA48; - - tf->feature = scsicmd[3]; - tf->nsect = scsicmd[4]; - tf->lbal = scsicmd[5]; - tf->lbam = scsicmd[6]; - tf->lbah = scsicmd[7]; - tf->device = scsicmd[8]; - tf->command = scsicmd[9]; - } - /* - * If slave is possible, enforce correct master/slave bit - */ - if (qc->ap->flags & ATA_FLAG_SLAVE_POSS) - tf->device = qc->dev->devno ? - tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1; - - /* - * Filter SET_FEATURES - XFER MODE command -- otherwise, - * SET_FEATURES - XFER MODE must be preceded/succeeded - * by an update to hardware-specific registers for each - * controller (i.e. the reason for ->set_piomode(), - * ->set_dmamode(), and ->post_set_mode() hooks). - */ - if ((tf->command == ATA_CMD_SET_FEATURES) - && (tf->feature == SETFEATURES_XFER)) - goto invalid_fld; - - /* - * Set flags so that all registers will be written, - * and pass on write indication (used for PIO/DMA - * setup.) - */ - tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE); - - if (cmd->sc_data_direction == DMA_TO_DEVICE) - tf->flags |= ATA_TFLAG_WRITE; - - /* - * Set transfer length. - * - * TODO: find out if we need to do more here to - * cover scatter/gather case. - */ - qc->nsect = cmd->request_bufflen / ATA_SECT_SIZE; - - /* request result TF */ - qc->flags |= ATA_QCFLAG_RESULT_TF; - - return 0; - - invalid_fld: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x00); - /* "Invalid field in cdb" */ - return 1; -} - -/** - * ata_get_xlat_func - check if SCSI to ATA translation is possible - * @dev: ATA device - * @cmd: SCSI command opcode to consider - * - * Look up the SCSI command given, and determine whether the - * SCSI command is to be translated or simulated. - * - * RETURNS: - * Pointer to translation function if possible, %NULL if not. - */ - -static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) -{ - switch (cmd) { - case READ_6: - case READ_10: - case READ_16: - - case WRITE_6: - case WRITE_10: - case WRITE_16: - return ata_scsi_rw_xlat; - - case SYNCHRONIZE_CACHE: - if (ata_try_flush_cache(dev)) - return ata_scsi_flush_xlat; - break; - - case VERIFY: - case VERIFY_16: - return ata_scsi_verify_xlat; - - case ATA_12: - case ATA_16: - return ata_scsi_pass_thru; - - case START_STOP: - return ata_scsi_start_stop_xlat; - } - - return NULL; -} - -/** - * ata_scsi_dump_cdb - dump SCSI command contents to dmesg - * @ap: ATA port to which the command was being sent - * @cmd: SCSI command to dump - * - * Prints the contents of a SCSI command via printk(). - */ - -static inline void ata_scsi_dump_cdb(struct ata_port *ap, - struct scsi_cmnd *cmd) -{ -#ifdef ATA_DEBUG - struct scsi_device *scsidev = cmd->device; - u8 *scsicmd = cmd->cmnd; - - DPRINTK("CDB (%u:%d,%d,%d) %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", - ap->id, - scsidev->channel, scsidev->id, scsidev->lun, - scsicmd[0], scsicmd[1], scsicmd[2], scsicmd[3], - scsicmd[4], scsicmd[5], scsicmd[6], scsicmd[7], - scsicmd[8]); -#endif -} - -static inline int __ata_scsi_queuecmd(struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *), - struct ata_device *dev) -{ - int rc = 0; - - if (dev->class == ATA_DEV_ATA) { - ata_xlat_func_t xlat_func = ata_get_xlat_func(dev, - cmd->cmnd[0]); - - if (xlat_func) - rc = ata_scsi_translate(dev, cmd, done, xlat_func); - else - ata_scsi_simulate(dev, cmd, done); - } else - rc = ata_scsi_translate(dev, cmd, done, atapi_xlat); - - return rc; -} - -/** - * ata_scsi_queuecmd - Issue SCSI cdb to libata-managed device - * @cmd: SCSI command to be sent - * @done: Completion function, called when command is complete - * - * In some cases, this function translates SCSI commands into - * ATA taskfiles, and queues the taskfiles to be sent to - * hardware. In other cases, this function simulates a - * SCSI device by evaluating and responding to certain - * SCSI commands. This creates the overall effect of - * ATA and ATAPI devices appearing as SCSI devices. - * - * LOCKING: - * Releases scsi-layer-held lock, and obtains host_set lock. - * - * RETURNS: - * Return value from __ata_scsi_queuecmd() if @cmd can be queued, - * 0 otherwise. - */ -int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) -{ - struct ata_port *ap; - struct ata_device *dev; - struct scsi_device *scsidev = cmd->device; - struct Scsi_Host *shost = scsidev->host; - int rc = 0; - - ap = ata_shost_to_port(shost); - - spin_unlock(shost->host_lock); - spin_lock(ap->lock); - - ata_scsi_dump_cdb(ap, cmd); - - dev = ata_scsi_find_dev(ap, scsidev); - if (likely(dev)) - rc = __ata_scsi_queuecmd(cmd, done, dev); - else { - cmd->result = (DID_BAD_TARGET << 16); - done(cmd); - } - - spin_unlock(ap->lock); - spin_lock(shost->host_lock); - return rc; -} - -/** - * ata_scsi_simulate - simulate SCSI command on ATA device - * @dev: the target device - * @cmd: SCSI command being sent to device. - * @done: SCSI command completion function. - * - * Interprets and directly executes a select list of SCSI commands - * that can be handled internally. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *)) -{ - struct ata_scsi_args args; - const u8 *scsicmd = cmd->cmnd; - - args.dev = dev; - args.id = dev->id; - args.cmd = cmd; - args.done = done; - - switch(scsicmd[0]) { - /* no-op's, complete with success */ - case SYNCHRONIZE_CACHE: - case REZERO_UNIT: - case SEEK_6: - case SEEK_10: - case TEST_UNIT_READY: - case FORMAT_UNIT: /* FIXME: correct? */ - case SEND_DIAGNOSTIC: /* FIXME: correct? */ - ata_scsi_rbuf_fill(&args, ata_scsiop_noop); - break; - - case INQUIRY: - if (scsicmd[1] & 2) /* is CmdDt set? */ - ata_scsi_invalid_field(cmd, done); - else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */ - ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std); - else if (scsicmd[2] == 0x00) - ata_scsi_rbuf_fill(&args, ata_scsiop_inq_00); - else if (scsicmd[2] == 0x80) - ata_scsi_rbuf_fill(&args, ata_scsiop_inq_80); - else if (scsicmd[2] == 0x83) - ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83); - else - ata_scsi_invalid_field(cmd, done); - break; - - case MODE_SENSE: - case MODE_SENSE_10: - ata_scsi_rbuf_fill(&args, ata_scsiop_mode_sense); - break; - - case MODE_SELECT: /* unconditionally return */ - case MODE_SELECT_10: /* bad-field-in-cdb */ - ata_scsi_invalid_field(cmd, done); - break; - - case READ_CAPACITY: - ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); - break; - - case SERVICE_ACTION_IN: - if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16) - ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); - else - ata_scsi_invalid_field(cmd, done); - break; - - case REPORT_LUNS: - ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns); - break; - - /* mandatory commands we haven't implemented yet */ - case REQUEST_SENSE: - - /* all other commands */ - default: - ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0); - /* "Invalid command operation code" */ - done(cmd); - break; - } -} - -void ata_scsi_scan_host(struct ata_port *ap) -{ - unsigned int i; - - if (ap->flags & ATA_FLAG_DISABLED) - return; - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; - struct scsi_device *sdev; - - if (!ata_dev_enabled(dev) || dev->sdev) - continue; - - sdev = __scsi_add_device(ap->host, 0, i, 0, NULL); - if (!IS_ERR(sdev)) { - dev->sdev = sdev; - scsi_device_put(sdev); - } - } -} - -/** - * ata_scsi_offline_dev - offline attached SCSI device - * @dev: ATA device to offline attached SCSI device for - * - * This function is called from ata_eh_hotplug() and responsible - * for taking the SCSI device attached to @dev offline. This - * function is called with host_set lock which protects dev->sdev - * against clearing. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - * - * RETURNS: - * 1 if attached SCSI device exists, 0 otherwise. - */ -int ata_scsi_offline_dev(struct ata_device *dev) -{ - if (dev->sdev) { - scsi_device_set_state(dev->sdev, SDEV_OFFLINE); - return 1; - } - return 0; -} - -/** - * ata_scsi_remove_dev - remove attached SCSI device - * @dev: ATA device to remove attached SCSI device for - * - * This function is called from ata_eh_scsi_hotplug() and - * responsible for removing the SCSI device attached to @dev. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -static void ata_scsi_remove_dev(struct ata_device *dev) -{ - struct ata_port *ap = dev->ap; - struct scsi_device *sdev; - unsigned long flags; - - /* Alas, we need to grab scan_mutex to ensure SCSI device - * state doesn't change underneath us and thus - * scsi_device_get() always succeeds. The mutex locking can - * be removed if there is __scsi_device_get() interface which - * increments reference counts regardless of device state. - */ - mutex_lock(&ap->host->scan_mutex); - spin_lock_irqsave(ap->lock, flags); - - /* clearing dev->sdev is protected by host_set lock */ - sdev = dev->sdev; - dev->sdev = NULL; - - if (sdev) { - /* If user initiated unplug races with us, sdev can go - * away underneath us after the host_set lock and - * scan_mutex are released. Hold onto it. - */ - if (scsi_device_get(sdev) == 0) { - /* The following ensures the attached sdev is - * offline on return from ata_scsi_offline_dev() - * regardless it wins or loses the race - * against this function. - */ - scsi_device_set_state(sdev, SDEV_OFFLINE); - } else { - WARN_ON(1); - sdev = NULL; - } - } - - spin_unlock_irqrestore(ap->lock, flags); - mutex_unlock(&ap->host->scan_mutex); - - if (sdev) { - ata_dev_printk(dev, KERN_INFO, "detaching (SCSI %s)\n", - sdev->sdev_gendev.bus_id); - - scsi_remove_device(sdev); - scsi_device_put(sdev); - } -} - -/** - * ata_scsi_hotplug - SCSI part of hotplug - * @data: Pointer to ATA port to perform SCSI hotplug on - * - * Perform SCSI part of hotplug. It's executed from a separate - * workqueue after EH completes. This is necessary because SCSI - * hot plugging requires working EH and hot unplugging is - * synchronized with hot plugging with a mutex. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -void ata_scsi_hotplug(void *data) -{ - struct ata_port *ap = data; - int i; - - if (ap->flags & ATA_FLAG_UNLOADING) { - DPRINTK("ENTER/EXIT - unloading\n"); - return; - } - - DPRINTK("ENTER\n"); - - /* unplug detached devices */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; - unsigned long flags; - - if (!(dev->flags & ATA_DFLAG_DETACHED)) - continue; - - spin_lock_irqsave(ap->lock, flags); - dev->flags &= ~ATA_DFLAG_DETACHED; - spin_unlock_irqrestore(ap->lock, flags); - - ata_scsi_remove_dev(dev); - } - - /* scan for new ones */ - ata_scsi_scan_host(ap); - - /* If we scanned while EH was in progress, scan would have - * failed silently. Requeue if there are enabled but - * unattached devices. - */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; - if (ata_dev_enabled(dev) && !dev->sdev) { - queue_delayed_work(ata_aux_wq, &ap->hotplug_task, HZ); - break; - } - } - - DPRINTK("EXIT\n"); -} - -/** - * ata_scsi_user_scan - indication for user-initiated bus scan - * @shost: SCSI host to scan - * @channel: Channel to scan - * @id: ID to scan - * @lun: LUN to scan - * - * This function is called when user explicitly requests bus - * scan. Set probe pending flag and invoke EH. - * - * LOCKING: - * SCSI layer (we don't care) - * - * RETURNS: - * Zero. - */ -static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, - unsigned int id, unsigned int lun) -{ - struct ata_port *ap = ata_shost_to_port(shost); - unsigned long flags; - int rc = 0; - - if (!ap->ops->error_handler) - return -EOPNOTSUPP; - - if ((channel != SCAN_WILD_CARD && channel != 0) || - (lun != SCAN_WILD_CARD && lun != 0)) - return -EINVAL; - - spin_lock_irqsave(ap->lock, flags); - - if (id == SCAN_WILD_CARD) { - ap->eh_info.probe_mask |= (1 << ATA_MAX_DEVICES) - 1; - ap->eh_info.action |= ATA_EH_SOFTRESET; - } else { - struct ata_device *dev = ata_find_dev(ap, id); - - if (dev) { - ap->eh_info.probe_mask |= 1 << dev->devno; - ap->eh_info.action |= ATA_EH_SOFTRESET; - } else - rc = -EINVAL; - } - - if (rc == 0) - ata_port_schedule_eh(ap); - - spin_unlock_irqrestore(ap->lock, flags); - - return rc; -} - -/** - * ata_scsi_dev_rescan - initiate scsi_rescan_device() - * @data: Pointer to ATA port to perform scsi_rescan_device() - * - * After ATA pass thru (SAT) commands are executed successfully, - * libata need to propagate the changes to SCSI layer. This - * function must be executed from ata_aux_wq such that sdev - * attach/detach don't race with rescan. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -void ata_scsi_dev_rescan(void *data) -{ - struct ata_port *ap = data; - struct ata_device *dev; - unsigned int i; - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - dev = &ap->device[i]; - - if (ata_dev_enabled(dev) && dev->sdev) - scsi_rescan_device(&(dev->sdev->sdev_gendev)); - } -} diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h deleted file mode 100644 index bdd48889709..00000000000 --- a/drivers/scsi/libata.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * libata.h - helper library for ATA - * - * Copyright 2003-2004 Red Hat, Inc. All rights reserved. - * Copyright 2003-2004 Jeff Garzik - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - */ - -#ifndef __LIBATA_H__ -#define __LIBATA_H__ - -#define DRV_NAME "libata" -#define DRV_VERSION "1.30" /* must be exactly four chars */ - -struct ata_scsi_args { - struct ata_device *dev; - u16 *id; - struct scsi_cmnd *cmd; - void (*done)(struct scsi_cmnd *); -}; - -/* libata-core.c */ -extern struct workqueue_struct *ata_aux_wq; -extern int atapi_enabled; -extern int atapi_dmadir; -extern int libata_fua; -extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev); -extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc); -extern void ata_dev_disable(struct ata_device *dev); -extern void ata_port_flush_task(struct ata_port *ap); -extern unsigned ata_exec_internal(struct ata_device *dev, - struct ata_taskfile *tf, const u8 *cdb, - int dma_dir, void *buf, unsigned int buflen); -extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, - int post_reset, u16 *id); -extern int ata_dev_configure(struct ata_device *dev, int print_info); -extern int sata_down_spd_limit(struct ata_port *ap); -extern int sata_set_spd_needed(struct ata_port *ap); -extern int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0); -extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev); -extern void ata_qc_free(struct ata_queued_cmd *qc); -extern void ata_qc_issue(struct ata_queued_cmd *qc); -extern void __ata_qc_complete(struct ata_queued_cmd *qc); -extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); -extern void ata_dev_select(struct ata_port *ap, unsigned int device, - unsigned int wait, unsigned int can_sleep); -extern void swap_buf_le16(u16 *buf, unsigned int buf_words); -extern void ata_dev_init(struct ata_device *dev); -extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg); -extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); - - -/* libata-scsi.c */ -extern struct scsi_transport_template ata_scsi_transport_template; - -extern void ata_scsi_scan_host(struct ata_port *ap); -extern int ata_scsi_offline_dev(struct ata_device *dev); -extern void ata_scsi_hotplug(void *data); -extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen); - -extern unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen); - -extern unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen); -extern unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen); -extern unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen); -extern unsigned int ata_scsiop_sync_cache(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen); -extern unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen); -extern unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen); -extern unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, - unsigned int buflen); -extern void ata_scsi_badcmd(struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *), - u8 asc, u8 ascq); -extern void ata_scsi_set_sense(struct scsi_cmnd *cmd, - u8 sk, u8 asc, u8 ascq); -extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, - unsigned int (*actor) (struct ata_scsi_args *args, - u8 *rbuf, unsigned int buflen)); -extern void ata_schedule_scsi_eh(struct Scsi_Host *shost); -extern void ata_scsi_dev_rescan(void *data); - -/* libata-eh.c */ -extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); -extern void ata_scsi_error(struct Scsi_Host *host); -extern void ata_port_wait_eh(struct ata_port *ap); -extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc); - -#endif /* __LIBATA_H__ */ diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 2673a11a949..c542d0e95e6 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -68,8 +68,7 @@ iscsi_check_assign_cmdsn(struct iscsi_session *session, struct iscsi_nopin *hdr) EXPORT_SYMBOL_GPL(iscsi_check_assign_cmdsn); void iscsi_prep_unsolicit_data_pdu(struct iscsi_cmd_task *ctask, - struct iscsi_data *hdr, - int transport_data_cnt) + struct iscsi_data *hdr) { struct iscsi_conn *conn = ctask->conn; @@ -82,14 +81,12 @@ void iscsi_prep_unsolicit_data_pdu(struct iscsi_cmd_task *ctask, hdr->itt = ctask->hdr->itt; hdr->exp_statsn = cpu_to_be32(conn->exp_statsn); - - hdr->offset = cpu_to_be32(ctask->total_length - - transport_data_cnt - - ctask->unsol_count); + hdr->offset = cpu_to_be32(ctask->unsol_offset); if (ctask->unsol_count > conn->max_xmit_dlength) { hton24(hdr->dlength, conn->max_xmit_dlength); ctask->data_count = conn->max_xmit_dlength; + ctask->unsol_offset += ctask->data_count; hdr->flags = 0; } else { hton24(hdr->dlength, ctask->unsol_count); @@ -125,6 +122,7 @@ static void iscsi_prep_scsi_cmd_pdu(struct iscsi_cmd_task *ctask) memcpy(hdr->cdb, sc->cmnd, sc->cmd_len); memset(&hdr->cdb[sc->cmd_len], 0, MAX_COMMAND_SIZE - sc->cmd_len); + ctask->data_count = 0; if (sc->sc_data_direction == DMA_TO_DEVICE) { hdr->flags |= ISCSI_FLAG_CMD_WRITE; /* @@ -143,6 +141,7 @@ static void iscsi_prep_scsi_cmd_pdu(struct iscsi_cmd_task *ctask) */ ctask->imm_count = 0; ctask->unsol_count = 0; + ctask->unsol_offset = 0; ctask->unsol_datasn = 0; if (session->imm_data_en) { @@ -156,9 +155,12 @@ static void iscsi_prep_scsi_cmd_pdu(struct iscsi_cmd_task *ctask) } else zero_data(ctask->hdr->dlength); - if (!session->initial_r2t_en) + if (!session->initial_r2t_en) { ctask->unsol_count = min(session->first_burst, ctask->total_length) - ctask->imm_count; + ctask->unsol_offset = ctask->imm_count; + } + if (!ctask->unsol_count) /* No unsolicit Data-Out's */ ctask->hdr->flags |= ISCSI_FLAG_CMD_FINAL; @@ -177,24 +179,51 @@ EXPORT_SYMBOL_GPL(iscsi_prep_scsi_cmd_pdu); /** * iscsi_complete_command - return command back to scsi-ml - * @session: iscsi session * @ctask: iscsi cmd task * * Must be called with session lock. * This function returns the scsi command to scsi-ml and returns * the cmd task to the pool of available cmd tasks. */ -static void iscsi_complete_command(struct iscsi_session *session, - struct iscsi_cmd_task *ctask) +static void iscsi_complete_command(struct iscsi_cmd_task *ctask) { + struct iscsi_session *session = ctask->conn->session; struct scsi_cmnd *sc = ctask->sc; + ctask->state = ISCSI_TASK_COMPLETED; ctask->sc = NULL; + /* SCSI eh reuses commands to verify us */ + sc->SCp.ptr = NULL; list_del_init(&ctask->running); __kfifo_put(session->cmdpool.queue, (void*)&ctask, sizeof(void*)); sc->scsi_done(sc); } +static void __iscsi_get_ctask(struct iscsi_cmd_task *ctask) +{ + atomic_inc(&ctask->refcount); +} + +static void iscsi_get_ctask(struct iscsi_cmd_task *ctask) +{ + spin_lock_bh(&ctask->conn->session->lock); + __iscsi_get_ctask(ctask); + spin_unlock_bh(&ctask->conn->session->lock); +} + +static void __iscsi_put_ctask(struct iscsi_cmd_task *ctask) +{ + if (atomic_dec_and_test(&ctask->refcount)) + iscsi_complete_command(ctask); +} + +static void iscsi_put_ctask(struct iscsi_cmd_task *ctask) +{ + spin_lock_bh(&ctask->conn->session->lock); + __iscsi_put_ctask(ctask); + spin_unlock_bh(&ctask->conn->session->lock); +} + /** * iscsi_cmd_rsp - SCSI Command Response processing * @conn: iscsi connection @@ -271,10 +300,53 @@ out: (long)sc, sc->result, ctask->itt); conn->scsirsp_pdus_cnt++; - iscsi_complete_command(conn->session, ctask); + __iscsi_put_ctask(ctask); return rc; } +static void iscsi_tmf_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr) +{ + struct iscsi_tm_rsp *tmf = (struct iscsi_tm_rsp *)hdr; + + conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1; + conn->tmfrsp_pdus_cnt++; + + if (conn->tmabort_state != TMABORT_INITIAL) + return; + + if (tmf->response == ISCSI_TMF_RSP_COMPLETE) + conn->tmabort_state = TMABORT_SUCCESS; + else if (tmf->response == ISCSI_TMF_RSP_NO_TASK) + conn->tmabort_state = TMABORT_NOT_FOUND; + else + conn->tmabort_state = TMABORT_FAILED; + wake_up(&conn->ehwait); +} + +static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr, + char *data, int datalen) +{ + struct iscsi_reject *reject = (struct iscsi_reject *)hdr; + struct iscsi_hdr rejected_pdu; + uint32_t itt; + + conn->exp_statsn = be32_to_cpu(reject->statsn) + 1; + + if (reject->reason == ISCSI_REASON_DATA_DIGEST_ERROR) { + if (ntoh24(reject->dlength) > datalen) + return ISCSI_ERR_PROTO; + + if (ntoh24(reject->dlength) >= sizeof(struct iscsi_hdr)) { + memcpy(&rejected_pdu, data, sizeof(struct iscsi_hdr)); + itt = rejected_pdu.itt & ISCSI_ITT_MASK; + printk(KERN_ERR "itt 0x%x had pdu (op 0x%x) rejected " + "due to DataDigest error.\n", itt, + rejected_pdu.opcode); + } + } + return 0; +} + /** * __iscsi_complete_pdu - complete pdu * @conn: iscsi conn @@ -316,7 +388,7 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, BUG_ON((void*)ctask != ctask->sc->SCp.ptr); if (hdr->flags & ISCSI_FLAG_DATA_STATUS) { conn->scsirsp_pdus_cnt++; - iscsi_complete_command(session, ctask); + __iscsi_put_ctask(ctask); } break; case ISCSI_OP_R2T: @@ -340,6 +412,10 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, switch(opcode) { case ISCSI_OP_LOGOUT_RSP: + if (datalen) { + rc = ISCSI_ERR_PROTO; + break; + } conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1; /* fall through */ case ISCSI_OP_LOGIN_RSP: @@ -348,7 +424,8 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, * login related PDU's exp_statsn is handled in * userspace */ - rc = iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen); + if (iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen)) + rc = ISCSI_ERR_CONN_FAILED; list_del(&mtask->running); if (conn->login_mtask != mtask) __kfifo_put(session->mgmtpool.queue, @@ -360,25 +437,17 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, break; } - conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1; - conn->tmfrsp_pdus_cnt++; - if (conn->tmabort_state == TMABORT_INITIAL) { - conn->tmabort_state = - ((struct iscsi_tm_rsp *)hdr)-> - response == ISCSI_TMF_RSP_COMPLETE ? - TMABORT_SUCCESS:TMABORT_FAILED; - /* unblock eh_abort() */ - wake_up(&conn->ehwait); - } + iscsi_tmf_rsp(conn, hdr); break; case ISCSI_OP_NOOP_IN: - if (hdr->ttt != ISCSI_RESERVED_TAG) { + if (hdr->ttt != ISCSI_RESERVED_TAG || datalen) { rc = ISCSI_ERR_PROTO; break; } conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1; - rc = iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen); + if (iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen)) + rc = ISCSI_ERR_CONN_FAILED; list_del(&mtask->running); if (conn->login_mtask != mtask) __kfifo_put(session->mgmtpool.queue, @@ -389,19 +458,27 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, break; } } else if (itt == ISCSI_RESERVED_TAG) { + rc = iscsi_check_assign_cmdsn(session, + (struct iscsi_nopin*)hdr); + if (rc) + goto done; + switch(opcode) { case ISCSI_OP_NOOP_IN: - if (!datalen) { - rc = iscsi_check_assign_cmdsn(session, - (struct iscsi_nopin*)hdr); - if (!rc && hdr->ttt != ISCSI_RESERVED_TAG) - rc = iscsi_recv_pdu(conn->cls_conn, - hdr, NULL, 0); - } else + if (datalen) { rc = ISCSI_ERR_PROTO; + break; + } + + if (hdr->ttt == ISCSI_RESERVED_TAG) + break; + + if (iscsi_recv_pdu(conn->cls_conn, hdr, NULL, 0)) + rc = ISCSI_ERR_CONN_FAILED; break; case ISCSI_OP_REJECT: - /* we need sth like iscsi_reject_rsp()*/ + rc = iscsi_handle_reject(conn, hdr, data, datalen); + break; case ISCSI_OP_ASYNC_EVENT: conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1; /* we need sth like iscsi_async_event_rsp() */ @@ -537,7 +614,9 @@ static int iscsi_data_xmit(struct iscsi_conn *conn) BUG_ON(conn->ctask && conn->mtask); if (conn->ctask) { + iscsi_get_ctask(conn->ctask); rc = tt->xmit_cmd_task(conn, conn->ctask); + iscsi_put_ctask(conn->ctask); if (rc) goto again; /* done with this in-progress ctask */ @@ -568,20 +647,31 @@ static int iscsi_data_xmit(struct iscsi_conn *conn) } /* process command queue */ - while (__kfifo_get(conn->xmitqueue, (void*)&conn->ctask, - sizeof(void*))) { + spin_lock_bh(&conn->session->lock); + while (!list_empty(&conn->xmitqueue)) { /* * iscsi tcp may readd the task to the xmitqueue to send * write data */ - spin_lock_bh(&conn->session->lock); - if (list_empty(&conn->ctask->running)) - list_add_tail(&conn->ctask->running, &conn->run_list); + conn->ctask = list_entry(conn->xmitqueue.next, + struct iscsi_cmd_task, running); + conn->ctask->state = ISCSI_TASK_RUNNING; + list_move_tail(conn->xmitqueue.next, &conn->run_list); + __iscsi_get_ctask(conn->ctask); spin_unlock_bh(&conn->session->lock); + rc = tt->xmit_cmd_task(conn, conn->ctask); if (rc) goto again; + + spin_lock_bh(&conn->session->lock); + __iscsi_put_ctask(conn->ctask); + if (rc) { + spin_unlock_bh(&conn->session->lock); + goto again; + } } + spin_unlock_bh(&conn->session->lock); /* done with this ctask */ conn->ctask = NULL; @@ -629,6 +719,7 @@ enum { FAILURE_SESSION_FAILED, FAILURE_SESSION_FREED, FAILURE_WINDOW_CLOSED, + FAILURE_OOM, FAILURE_SESSION_TERMINATE, FAILURE_SESSION_IN_RECOVERY, FAILURE_SESSION_RECOVERY_TIMEOUT, @@ -644,6 +735,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) sc->scsi_done = done; sc->result = 0; + sc->SCp.ptr = NULL; host = sc->device->host; session = iscsi_hostdata(host->hostdata); @@ -687,10 +779,16 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) conn = session->leadconn; - __kfifo_get(session->cmdpool.queue, (void*)&ctask, sizeof(void*)); + if (!__kfifo_get(session->cmdpool.queue, (void*)&ctask, + sizeof(void*))) { + reason = FAILURE_OOM; + goto reject; + } sc->SCp.phase = session->age; sc->SCp.ptr = (char *)ctask; + atomic_set(&ctask->refcount, 1); + ctask->state = ISCSI_TASK_PENDING; ctask->mtask = NULL; ctask->conn = conn; ctask->sc = sc; @@ -700,11 +798,12 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) session->tt->init_cmd_task(ctask); - __kfifo_put(conn->xmitqueue, (void*)&ctask, sizeof(void*)); + list_add_tail(&ctask->running, &conn->xmitqueue); debug_scsi( - "ctask enq [%s cid %d sc %lx itt 0x%x len %d cmdsn %d win %d]\n", + "ctask enq [%s cid %d sc %p cdb 0x%x itt 0x%x len %d cmdsn %d " + "win %d]\n", sc->sc_data_direction == DMA_TO_DEVICE ? "write" : "read", - conn->id, (long)sc, ctask->itt, sc->request_bufflen, + conn->id, sc, sc->cmnd[0], ctask->itt, sc->request_bufflen, session->cmdsn, session->max_cmdsn - session->exp_cmdsn + 1); spin_unlock(&session->lock); @@ -977,31 +1076,27 @@ static int iscsi_exec_abort_task(struct scsi_cmnd *sc, /* * xmit mutex and session lock must be held */ -#define iscsi_remove_task(tasktype) \ -static struct iscsi_##tasktype * \ -iscsi_remove_##tasktype(struct kfifo *fifo, uint32_t itt) \ -{ \ - int i, nr_tasks = __kfifo_len(fifo) / sizeof(void*); \ - struct iscsi_##tasktype *task; \ - \ - debug_scsi("searching %d tasks\n", nr_tasks); \ - \ - for (i = 0; i < nr_tasks; i++) { \ - __kfifo_get(fifo, (void*)&task, sizeof(void*)); \ - debug_scsi("check task %u\n", task->itt); \ - \ - if (task->itt == itt) { \ - debug_scsi("matched task\n"); \ - return task; \ - } \ - \ - __kfifo_put(fifo, (void*)&task, sizeof(void*)); \ - } \ - return NULL; \ -} +static struct iscsi_mgmt_task * +iscsi_remove_mgmt_task(struct kfifo *fifo, uint32_t itt) +{ + int i, nr_tasks = __kfifo_len(fifo) / sizeof(void*); + struct iscsi_mgmt_task *task; + + debug_scsi("searching %d tasks\n", nr_tasks); + + for (i = 0; i < nr_tasks; i++) { + __kfifo_get(fifo, (void*)&task, sizeof(void*)); + debug_scsi("check task %u\n", task->itt); + + if (task->itt == itt) { + debug_scsi("matched task\n"); + return task; + } -iscsi_remove_task(mgmt_task); -iscsi_remove_task(cmd_task); + __kfifo_put(fifo, (void*)&task, sizeof(void*)); + } + return NULL; +} static int iscsi_ctask_mtask_cleanup(struct iscsi_cmd_task *ctask) { @@ -1027,25 +1122,39 @@ static void fail_command(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, { struct scsi_cmnd *sc; - conn->session->tt->cleanup_cmd_task(conn, ctask); - iscsi_ctask_mtask_cleanup(ctask); - sc = ctask->sc; if (!sc) return; + + conn->session->tt->cleanup_cmd_task(conn, ctask); + iscsi_ctask_mtask_cleanup(ctask); + sc->result = err; sc->resid = sc->request_bufflen; - iscsi_complete_command(conn->session, ctask); + /* release ref from queuecommand */ + __iscsi_put_ctask(ctask); } int iscsi_eh_abort(struct scsi_cmnd *sc) { - struct iscsi_cmd_task *ctask = (struct iscsi_cmd_task *)sc->SCp.ptr; - struct iscsi_conn *conn = ctask->conn; - struct iscsi_session *session = conn->session; - struct iscsi_cmd_task *pending_ctask; + struct iscsi_cmd_task *ctask; + struct iscsi_conn *conn; + struct iscsi_session *session; int rc; + /* + * if session was ISCSI_STATE_IN_RECOVERY then we may not have + * got the command. + */ + if (!sc->SCp.ptr) { + debug_scsi("sc never reached iscsi layer or it completed.\n"); + return SUCCESS; + } + + ctask = (struct iscsi_cmd_task *)sc->SCp.ptr; + conn = ctask->conn; + session = conn->session; + conn->eh_abort_cnt++; debug_scsi("aborting [sc %p itt 0x%x]\n", sc, ctask->itt); @@ -1061,8 +1170,11 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) goto failed; /* ctask completed before time out */ - if (!ctask->sc) - goto success; + if (!ctask->sc) { + spin_unlock_bh(&session->lock); + debug_scsi("sc completed while abort in progress\n"); + goto success_rel_mutex; + } /* what should we do here ? */ if (conn->ctask == ctask) { @@ -1071,17 +1183,8 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) goto failed; } - /* check for the easy pending cmd abort */ - pending_ctask = iscsi_remove_cmd_task(conn->xmitqueue, ctask->itt); - if (pending_ctask) { - /* iscsi_tcp queues write transfers on the xmitqueue */ - if (list_empty(&pending_ctask->running)) { - debug_scsi("found pending task\n"); - goto success; - } else - __kfifo_put(conn->xmitqueue, (void*)&pending_ctask, - sizeof(void*)); - } + if (ctask->state == ISCSI_TASK_PENDING) + goto success_cleanup; conn->tmabort_state = TMABORT_INITIAL; @@ -1089,25 +1192,31 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) rc = iscsi_exec_abort_task(sc, ctask); spin_lock_bh(&session->lock); - iscsi_ctask_mtask_cleanup(ctask); if (rc || sc->SCp.phase != session->age || session->state != ISCSI_STATE_LOGGED_IN) goto failed; + iscsi_ctask_mtask_cleanup(ctask); - /* ctask completed before tmf abort response */ - if (!ctask->sc) { - debug_scsi("sc completed while abort in progress\n"); - goto success; - } - - if (conn->tmabort_state != TMABORT_SUCCESS) { + switch (conn->tmabort_state) { + case TMABORT_SUCCESS: + goto success_cleanup; + case TMABORT_NOT_FOUND: + if (!ctask->sc) { + /* ctask completed before tmf abort response */ + spin_unlock_bh(&session->lock); + debug_scsi("sc completed while abort in progress\n"); + goto success_rel_mutex; + } + /* fall through */ + default: + /* timedout or failed */ spin_unlock_bh(&session->lock); iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); spin_lock_bh(&session->lock); goto failed; } -success: +success_cleanup: debug_scsi("abort success [sc %lx itt 0x%x]\n", (long)sc, ctask->itt); spin_unlock_bh(&session->lock); @@ -1121,6 +1230,7 @@ success: spin_unlock(&session->lock); write_unlock_bh(conn->recv_lock); +success_rel_mutex: mutex_unlock(&conn->xmitmutex); return SUCCESS; @@ -1263,6 +1373,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit, if (cmd_task_size) ctask->dd_data = &ctask[1]; ctask->itt = cmd_i; + INIT_LIST_HEAD(&ctask->running); } spin_lock_init(&session->lock); @@ -1282,18 +1393,24 @@ iscsi_session_setup(struct iscsi_transport *iscsit, if (mgmt_task_size) mtask->dd_data = &mtask[1]; mtask->itt = ISCSI_MGMT_ITT_OFFSET + cmd_i; + INIT_LIST_HEAD(&mtask->running); } if (scsi_add_host(shost, NULL)) goto add_host_fail; + if (!try_module_get(iscsit->owner)) + goto cls_session_fail; + cls_session = iscsi_create_session(shost, iscsit, 0); if (!cls_session) - goto cls_session_fail; + goto module_put; *(unsigned long*)shost->hostdata = (unsigned long)cls_session; return cls_session; +module_put: + module_put(iscsit->owner); cls_session_fail: scsi_remove_host(shost); add_host_fail: @@ -1317,14 +1434,18 @@ void iscsi_session_teardown(struct iscsi_cls_session *cls_session) { struct Scsi_Host *shost = iscsi_session_to_shost(cls_session); struct iscsi_session *session = iscsi_hostdata(shost->hostdata); + struct module *owner = cls_session->transport->owner; scsi_remove_host(shost); iscsi_pool_free(&session->mgmtpool, (void**)session->mgmt_cmds); iscsi_pool_free(&session->cmdpool, (void**)session->cmds); + kfree(session->targetname); + iscsi_destroy_session(cls_session); scsi_host_put(shost); + module_put(owner); } EXPORT_SYMBOL_GPL(iscsi_session_teardown); @@ -1355,12 +1476,7 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, uint32_t conn_idx) conn->tmabort_state = TMABORT_INITIAL; INIT_LIST_HEAD(&conn->run_list); INIT_LIST_HEAD(&conn->mgmt_run_list); - - /* initialize general xmit PDU commands queue */ - conn->xmitqueue = kfifo_alloc(session->cmds_max * sizeof(void*), - GFP_KERNEL, NULL); - if (conn->xmitqueue == ERR_PTR(-ENOMEM)) - goto xmitqueue_alloc_fail; + INIT_LIST_HEAD(&conn->xmitqueue); /* initialize general immediate & non-immediate PDU commands queue */ conn->immqueue = kfifo_alloc(session->mgmtpool_max * sizeof(void*), @@ -1388,7 +1504,7 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, uint32_t conn_idx) data = kmalloc(DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH, GFP_KERNEL); if (!data) goto login_mtask_data_alloc_fail; - conn->login_mtask->data = data; + conn->login_mtask->data = conn->data = data; init_timer(&conn->tmabort_timer); mutex_init(&conn->xmitmutex); @@ -1404,8 +1520,6 @@ login_mtask_alloc_fail: mgmtqueue_alloc_fail: kfifo_free(conn->immqueue); immqueue_alloc_fail: - kfifo_free(conn->xmitqueue); -xmitqueue_alloc_fail: iscsi_destroy_conn(cls_conn); return NULL; } @@ -1426,12 +1540,6 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); mutex_lock(&conn->xmitmutex); - if (conn->c_stage == ISCSI_CONN_INITIAL_STAGE) { - if (session->tt->suspend_conn_recv) - session->tt->suspend_conn_recv(conn); - - session->tt->terminate_conn(conn); - } spin_lock_bh(&session->lock); conn->c_stage = ISCSI_CONN_CLEANUP_WAIT; @@ -1468,7 +1576,8 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) } spin_lock_bh(&session->lock); - kfree(conn->login_mtask->data); + kfree(conn->data); + kfree(conn->persistent_address); __kfifo_put(session->mgmtpool.queue, (void*)&conn->login_mtask, sizeof(void*)); list_del(&conn->item); @@ -1483,7 +1592,6 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) session->cmdsn = session->max_cmdsn = session->exp_cmdsn = 1; spin_unlock_bh(&session->lock); - kfifo_free(conn->xmitqueue); kfifo_free(conn->immqueue); kfifo_free(conn->mgmtqueue); @@ -1496,11 +1604,19 @@ int iscsi_conn_start(struct iscsi_cls_conn *cls_conn) struct iscsi_conn *conn = cls_conn->dd_data; struct iscsi_session *session = conn->session; - if (session == NULL) { + if (!session) { printk(KERN_ERR "iscsi: can't start unbound connection\n"); return -EPERM; } + if ((session->imm_data_en || !session->initial_r2t_en) && + session->first_burst > session->max_burst) { + printk("iscsi: invalid burst lengths: " + "first_burst %d max_burst %d\n", + session->first_burst, session->max_burst); + return -EINVAL; + } + spin_lock_bh(&session->lock); conn->c_stage = ISCSI_CONN_STARTED; session->state = ISCSI_STATE_LOGGED_IN; @@ -1566,7 +1682,7 @@ static void fail_all_commands(struct iscsi_conn *conn) struct iscsi_cmd_task *ctask, *tmp; /* flush pending */ - while (__kfifo_get(conn->xmitqueue, (void*)&ctask, sizeof(void*))) { + list_for_each_entry_safe(ctask, tmp, &conn->xmitqueue, running) { debug_scsi("failing pending sc %p itt 0x%x\n", ctask->sc, ctask->itt); fail_command(conn, ctask, DID_BUS_BUSY << 16); @@ -1609,8 +1725,9 @@ static void iscsi_start_session_recovery(struct iscsi_session *session, set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); spin_unlock_bh(&session->lock); - if (session->tt->suspend_conn_recv) - session->tt->suspend_conn_recv(conn); + write_lock_bh(conn->recv_lock); + set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx); + write_unlock_bh(conn->recv_lock); mutex_lock(&conn->xmitmutex); /* @@ -1629,7 +1746,6 @@ static void iscsi_start_session_recovery(struct iscsi_session *session, } } - session->tt->terminate_conn(conn); /* * flush queues. */ @@ -1697,6 +1813,185 @@ int iscsi_conn_bind(struct iscsi_cls_session *cls_session, } EXPORT_SYMBOL_GPL(iscsi_conn_bind); + +int iscsi_set_param(struct iscsi_cls_conn *cls_conn, + enum iscsi_param param, char *buf, int buflen) +{ + struct iscsi_conn *conn = cls_conn->dd_data; + struct iscsi_session *session = conn->session; + uint32_t value; + + switch(param) { + case ISCSI_PARAM_MAX_RECV_DLENGTH: + sscanf(buf, "%d", &conn->max_recv_dlength); + break; + case ISCSI_PARAM_MAX_XMIT_DLENGTH: + sscanf(buf, "%d", &conn->max_xmit_dlength); + break; + case ISCSI_PARAM_HDRDGST_EN: + sscanf(buf, "%d", &conn->hdrdgst_en); + break; + case ISCSI_PARAM_DATADGST_EN: + sscanf(buf, "%d", &conn->datadgst_en); + break; + case ISCSI_PARAM_INITIAL_R2T_EN: + sscanf(buf, "%d", &session->initial_r2t_en); + break; + case ISCSI_PARAM_MAX_R2T: + sscanf(buf, "%d", &session->max_r2t); + break; + case ISCSI_PARAM_IMM_DATA_EN: + sscanf(buf, "%d", &session->imm_data_en); + break; + case ISCSI_PARAM_FIRST_BURST: + sscanf(buf, "%d", &session->first_burst); + break; + case ISCSI_PARAM_MAX_BURST: + sscanf(buf, "%d", &session->max_burst); + break; + case ISCSI_PARAM_PDU_INORDER_EN: + sscanf(buf, "%d", &session->pdu_inorder_en); + break; + case ISCSI_PARAM_DATASEQ_INORDER_EN: + sscanf(buf, "%d", &session->dataseq_inorder_en); + break; + case ISCSI_PARAM_ERL: + sscanf(buf, "%d", &session->erl); + break; + case ISCSI_PARAM_IFMARKER_EN: + sscanf(buf, "%d", &value); + BUG_ON(value); + break; + case ISCSI_PARAM_OFMARKER_EN: + sscanf(buf, "%d", &value); + BUG_ON(value); + break; + case ISCSI_PARAM_EXP_STATSN: + sscanf(buf, "%u", &conn->exp_statsn); + break; + case ISCSI_PARAM_TARGET_NAME: + /* this should not change between logins */ + if (session->targetname) + break; + + session->targetname = kstrdup(buf, GFP_KERNEL); + if (!session->targetname) + return -ENOMEM; + break; + case ISCSI_PARAM_TPGT: + sscanf(buf, "%d", &session->tpgt); + break; + case ISCSI_PARAM_PERSISTENT_PORT: + sscanf(buf, "%d", &conn->persistent_port); + break; + case ISCSI_PARAM_PERSISTENT_ADDRESS: + /* + * this is the address returned in discovery so it should + * not change between logins. + */ + if (conn->persistent_address) + break; + + conn->persistent_address = kstrdup(buf, GFP_KERNEL); + if (!conn->persistent_address) + return -ENOMEM; + break; + default: + return -ENOSYS; + } + + return 0; +} +EXPORT_SYMBOL_GPL(iscsi_set_param); + +int iscsi_session_get_param(struct iscsi_cls_session *cls_session, + enum iscsi_param param, char *buf) +{ + struct Scsi_Host *shost = iscsi_session_to_shost(cls_session); + struct iscsi_session *session = iscsi_hostdata(shost->hostdata); + int len; + + switch(param) { + case ISCSI_PARAM_INITIAL_R2T_EN: + len = sprintf(buf, "%d\n", session->initial_r2t_en); + break; + case ISCSI_PARAM_MAX_R2T: + len = sprintf(buf, "%hu\n", session->max_r2t); + break; + case ISCSI_PARAM_IMM_DATA_EN: + len = sprintf(buf, "%d\n", session->imm_data_en); + break; + case ISCSI_PARAM_FIRST_BURST: + len = sprintf(buf, "%u\n", session->first_burst); + break; + case ISCSI_PARAM_MAX_BURST: + len = sprintf(buf, "%u\n", session->max_burst); + break; + case ISCSI_PARAM_PDU_INORDER_EN: + len = sprintf(buf, "%d\n", session->pdu_inorder_en); + break; + case ISCSI_PARAM_DATASEQ_INORDER_EN: + len = sprintf(buf, "%d\n", session->dataseq_inorder_en); + break; + case ISCSI_PARAM_ERL: + len = sprintf(buf, "%d\n", session->erl); + break; + case ISCSI_PARAM_TARGET_NAME: + len = sprintf(buf, "%s\n", session->targetname); + break; + case ISCSI_PARAM_TPGT: + len = sprintf(buf, "%d\n", session->tpgt); + break; + default: + return -ENOSYS; + } + + return len; +} +EXPORT_SYMBOL_GPL(iscsi_session_get_param); + +int iscsi_conn_get_param(struct iscsi_cls_conn *cls_conn, + enum iscsi_param param, char *buf) +{ + struct iscsi_conn *conn = cls_conn->dd_data; + int len; + + switch(param) { + case ISCSI_PARAM_MAX_RECV_DLENGTH: + len = sprintf(buf, "%u\n", conn->max_recv_dlength); + break; + case ISCSI_PARAM_MAX_XMIT_DLENGTH: + len = sprintf(buf, "%u\n", conn->max_xmit_dlength); + break; + case ISCSI_PARAM_HDRDGST_EN: + len = sprintf(buf, "%d\n", conn->hdrdgst_en); + break; + case ISCSI_PARAM_DATADGST_EN: + len = sprintf(buf, "%d\n", conn->datadgst_en); + break; + case ISCSI_PARAM_IFMARKER_EN: + len = sprintf(buf, "%d\n", conn->ifmarker_en); + break; + case ISCSI_PARAM_OFMARKER_EN: + len = sprintf(buf, "%d\n", conn->ofmarker_en); + break; + case ISCSI_PARAM_EXP_STATSN: + len = sprintf(buf, "%u\n", conn->exp_statsn); + break; + case ISCSI_PARAM_PERSISTENT_PORT: + len = sprintf(buf, "%d\n", conn->persistent_port); + break; + case ISCSI_PARAM_PERSISTENT_ADDRESS: + len = sprintf(buf, "%s\n", conn->persistent_address); + break; + default: + return -ENOSYS; + } + + return len; +} +EXPORT_SYMBOL_GPL(iscsi_conn_get_param); + MODULE_AUTHOR("Mike Christie"); MODULE_DESCRIPTION("iSCSI library functions"); MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/libsas/Kconfig b/drivers/scsi/libsas/Kconfig new file mode 100644 index 00000000000..aafdc92f831 --- /dev/null +++ b/drivers/scsi/libsas/Kconfig @@ -0,0 +1,39 @@ +# +# Kernel configuration file for the SAS Class +# +# Copyright (C) 2005 Adaptec, Inc. All rights reserved. +# Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> +# +# This file is licensed under GPLv2. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; version 2 of the +# License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 +# USA +# + +config SCSI_SAS_LIBSAS + tristate "SAS Domain Transport Attributes" + depends on SCSI + select SCSI_SAS_ATTRS + help + This provides transport specific helpers for SAS drivers which + use the domain device construct (like the aic94xxx). + +config SCSI_SAS_LIBSAS_DEBUG + bool "Compile the SAS Domain Transport Attributes in debug mode" + default y + depends on SCSI_SAS_LIBSAS + help + Compiles the SAS Layer in debug mode. In debug mode, the + SAS Layer prints diagnostic and debug messages. diff --git a/drivers/scsi/libsas/Makefile b/drivers/scsi/libsas/Makefile new file mode 100644 index 00000000000..44d972a3b4b --- /dev/null +++ b/drivers/scsi/libsas/Makefile @@ -0,0 +1,36 @@ +# +# Kernel Makefile for the libsas helpers +# +# Copyright (C) 2005 Adaptec, Inc. All rights reserved. +# Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> +# +# This file is licensed under GPLv2. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; version 2 of the +# License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 +# USA + +ifeq ($(CONFIG_SCSI_SAS_LIBSAS_DEBUG),y) + EXTRA_CFLAGS += -DSAS_DEBUG +endif + +obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas.o +libsas-y += sas_init.o \ + sas_phy.o \ + sas_port.o \ + sas_event.o \ + sas_dump.o \ + sas_discover.o \ + sas_expander.o \ + sas_scsi_host.o diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c new file mode 100644 index 00000000000..d977bd492d8 --- /dev/null +++ b/drivers/scsi/libsas/sas_discover.c @@ -0,0 +1,749 @@ +/* + * Serial Attached SCSI (SAS) Discover process + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include <linux/pci.h> +#include <linux/scatterlist.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_eh.h> +#include "sas_internal.h" + +#include <scsi/scsi_transport.h> +#include <scsi/scsi_transport_sas.h> +#include "../scsi_sas_internal.h" + +/* ---------- Basic task processing for discovery purposes ---------- */ + +void sas_init_dev(struct domain_device *dev) +{ + INIT_LIST_HEAD(&dev->siblings); + INIT_LIST_HEAD(&dev->dev_list_node); + switch (dev->dev_type) { + case SAS_END_DEV: + break; + case EDGE_DEV: + case FANOUT_DEV: + INIT_LIST_HEAD(&dev->ex_dev.children); + break; + case SATA_DEV: + case SATA_PM: + case SATA_PM_PORT: + INIT_LIST_HEAD(&dev->sata_dev.children); + break; + default: + break; + } +} + +static void sas_task_timedout(unsigned long _task) +{ + struct sas_task *task = (void *) _task; + unsigned long flags; + + spin_lock_irqsave(&task->task_state_lock, flags); + if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) + task->task_state_flags |= SAS_TASK_STATE_ABORTED; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + complete(&task->completion); +} + +static void sas_disc_task_done(struct sas_task *task) +{ + if (!del_timer(&task->timer)) + return; + complete(&task->completion); +} + +#define SAS_DEV_TIMEOUT 10 + +/** + * sas_execute_task -- Basic task processing for discovery + * @task: the task to be executed + * @buffer: pointer to buffer to do I/O + * @size: size of @buffer + * @pci_dma_dir: PCI_DMA_... + */ +static int sas_execute_task(struct sas_task *task, void *buffer, int size, + int pci_dma_dir) +{ + int res = 0; + struct scatterlist *scatter = NULL; + struct task_status_struct *ts = &task->task_status; + int num_scatter = 0; + int retries = 0; + struct sas_internal *i = + to_sas_internal(task->dev->port->ha->core.shost->transportt); + + if (pci_dma_dir != PCI_DMA_NONE) { + scatter = kzalloc(sizeof(*scatter), GFP_KERNEL); + if (!scatter) + goto out; + + sg_init_one(scatter, buffer, size); + num_scatter = 1; + } + + task->task_proto = task->dev->tproto; + task->scatter = scatter; + task->num_scatter = num_scatter; + task->total_xfer_len = size; + task->data_dir = pci_dma_dir; + task->task_done = sas_disc_task_done; + + for (retries = 0; retries < 5; retries++) { + task->task_state_flags = SAS_TASK_STATE_PENDING; + init_completion(&task->completion); + + task->timer.data = (unsigned long) task; + task->timer.function = sas_task_timedout; + task->timer.expires = jiffies + SAS_DEV_TIMEOUT*HZ; + add_timer(&task->timer); + + res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL); + if (res) { + del_timer(&task->timer); + SAS_DPRINTK("executing SAS discovery task failed:%d\n", + res); + goto ex_err; + } + wait_for_completion(&task->completion); + res = -ETASK; + if (task->task_state_flags & SAS_TASK_STATE_ABORTED) { + int res2; + SAS_DPRINTK("task aborted, flags:0x%x\n", + task->task_state_flags); + res2 = i->dft->lldd_abort_task(task); + SAS_DPRINTK("came back from abort task\n"); + if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { + if (res2 == TMF_RESP_FUNC_COMPLETE) + continue; /* Retry the task */ + else + goto ex_err; + } + } + if (task->task_status.stat == SAM_BUSY || + task->task_status.stat == SAM_TASK_SET_FULL || + task->task_status.stat == SAS_QUEUE_FULL) { + SAS_DPRINTK("task: q busy, sleeping...\n"); + schedule_timeout_interruptible(HZ); + } else if (task->task_status.stat == SAM_CHECK_COND) { + struct scsi_sense_hdr shdr; + + if (!scsi_normalize_sense(ts->buf, ts->buf_valid_size, + &shdr)) { + SAS_DPRINTK("couldn't normalize sense\n"); + continue; + } + if ((shdr.sense_key == 6 && shdr.asc == 0x29) || + (shdr.sense_key == 2 && shdr.asc == 4 && + shdr.ascq == 1)) { + SAS_DPRINTK("device %016llx LUN: %016llx " + "powering up or not ready yet, " + "sleeping...\n", + SAS_ADDR(task->dev->sas_addr), + SAS_ADDR(task->ssp_task.LUN)); + + schedule_timeout_interruptible(5*HZ); + } else if (shdr.sense_key == 1) { + res = 0; + break; + } else if (shdr.sense_key == 5) { + break; + } else { + SAS_DPRINTK("dev %016llx LUN: %016llx " + "sense key:0x%x ASC:0x%x ASCQ:0x%x" + "\n", + SAS_ADDR(task->dev->sas_addr), + SAS_ADDR(task->ssp_task.LUN), + shdr.sense_key, + shdr.asc, shdr.ascq); + } + } else if (task->task_status.resp != SAS_TASK_COMPLETE || + task->task_status.stat != SAM_GOOD) { + SAS_DPRINTK("task finished with resp:0x%x, " + "stat:0x%x\n", + task->task_status.resp, + task->task_status.stat); + goto ex_err; + } else { + res = 0; + break; + } + } +ex_err: + if (pci_dma_dir != PCI_DMA_NONE) + kfree(scatter); +out: + return res; +} + +/* ---------- Domain device discovery ---------- */ + +/** + * sas_get_port_device -- Discover devices which caused port creation + * @port: pointer to struct sas_port of interest + * + * Devices directly attached to a HA port, have no parent. This is + * how we know they are (domain) "root" devices. All other devices + * do, and should have their "parent" pointer set appropriately as + * soon as a child device is discovered. + */ +static int sas_get_port_device(struct asd_sas_port *port) +{ + unsigned long flags; + struct asd_sas_phy *phy; + struct sas_rphy *rphy; + struct domain_device *dev; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + + spin_lock_irqsave(&port->phy_list_lock, flags); + if (list_empty(&port->phy_list)) { + spin_unlock_irqrestore(&port->phy_list_lock, flags); + kfree(dev); + return -ENODEV; + } + phy = container_of(port->phy_list.next, struct asd_sas_phy, port_phy_el); + spin_lock(&phy->frame_rcvd_lock); + memcpy(dev->frame_rcvd, phy->frame_rcvd, min(sizeof(dev->frame_rcvd), + (size_t)phy->frame_rcvd_size)); + spin_unlock(&phy->frame_rcvd_lock); + spin_unlock_irqrestore(&port->phy_list_lock, flags); + + if (dev->frame_rcvd[0] == 0x34 && port->oob_mode == SATA_OOB_MODE) { + struct dev_to_host_fis *fis = + (struct dev_to_host_fis *) dev->frame_rcvd; + if (fis->interrupt_reason == 1 && fis->lbal == 1 && + fis->byte_count_low==0x69 && fis->byte_count_high == 0x96 + && (fis->device & ~0x10) == 0) + dev->dev_type = SATA_PM; + else + dev->dev_type = SATA_DEV; + dev->tproto = SATA_PROTO; + } else { + struct sas_identify_frame *id = + (struct sas_identify_frame *) dev->frame_rcvd; + dev->dev_type = id->dev_type; + dev->iproto = id->initiator_bits; + dev->tproto = id->target_bits; + } + + sas_init_dev(dev); + + switch (dev->dev_type) { + case SAS_END_DEV: + rphy = sas_end_device_alloc(port->port); + break; + case EDGE_DEV: + rphy = sas_expander_alloc(port->port, + SAS_EDGE_EXPANDER_DEVICE); + break; + case FANOUT_DEV: + rphy = sas_expander_alloc(port->port, + SAS_FANOUT_EXPANDER_DEVICE); + break; + case SATA_DEV: + default: + printk("ERROR: Unidentified device type %d\n", dev->dev_type); + rphy = NULL; + break; + } + + if (!rphy) { + kfree(dev); + return -ENODEV; + } + rphy->identify.phy_identifier = phy->phy->identify.phy_identifier; + memcpy(dev->sas_addr, port->attached_sas_addr, SAS_ADDR_SIZE); + sas_fill_in_rphy(dev, rphy); + sas_hash_addr(dev->hashed_sas_addr, dev->sas_addr); + port->port_dev = dev; + dev->port = port; + dev->linkrate = port->linkrate; + dev->min_linkrate = port->linkrate; + dev->max_linkrate = port->linkrate; + dev->pathways = port->num_phys; + memset(port->disc.fanout_sas_addr, 0, SAS_ADDR_SIZE); + memset(port->disc.eeds_a, 0, SAS_ADDR_SIZE); + memset(port->disc.eeds_b, 0, SAS_ADDR_SIZE); + port->disc.max_level = 0; + + dev->rphy = rphy; + spin_lock(&port->dev_list_lock); + list_add_tail(&dev->dev_list_node, &port->dev_list); + spin_unlock(&port->dev_list_lock); + + return 0; +} + +/* ---------- Discover and Revalidate ---------- */ + +/* ---------- SATA ---------- */ + +static void sas_get_ata_command_set(struct domain_device *dev) +{ + struct dev_to_host_fis *fis = + (struct dev_to_host_fis *) dev->frame_rcvd; + + if ((fis->sector_count == 1 && /* ATA */ + fis->lbal == 1 && + fis->lbam == 0 && + fis->lbah == 0 && + fis->device == 0) + || + (fis->sector_count == 0 && /* CE-ATA (mATA) */ + fis->lbal == 0 && + fis->lbam == 0xCE && + fis->lbah == 0xAA && + (fis->device & ~0x10) == 0)) + + dev->sata_dev.command_set = ATA_COMMAND_SET; + + else if ((fis->interrupt_reason == 1 && /* ATAPI */ + fis->lbal == 1 && + fis->byte_count_low == 0x14 && + fis->byte_count_high == 0xEB && + (fis->device & ~0x10) == 0)) + + dev->sata_dev.command_set = ATAPI_COMMAND_SET; + + else if ((fis->sector_count == 1 && /* SEMB */ + fis->lbal == 1 && + fis->lbam == 0x3C && + fis->lbah == 0xC3 && + fis->device == 0) + || + (fis->interrupt_reason == 1 && /* SATA PM */ + fis->lbal == 1 && + fis->byte_count_low == 0x69 && + fis->byte_count_high == 0x96 && + (fis->device & ~0x10) == 0)) + + /* Treat it as a superset? */ + dev->sata_dev.command_set = ATAPI_COMMAND_SET; +} + +/** + * sas_issue_ata_cmd -- Basic SATA command processing for discovery + * @dev: the device to send the command to + * @command: the command register + * @features: the features register + * @buffer: pointer to buffer to do I/O + * @size: size of @buffer + * @pci_dma_dir: PCI_DMA_... + */ +static int sas_issue_ata_cmd(struct domain_device *dev, u8 command, + u8 features, void *buffer, int size, + int pci_dma_dir) +{ + int res = 0; + struct sas_task *task; + struct dev_to_host_fis *d2h_fis = (struct dev_to_host_fis *) + &dev->frame_rcvd[0]; + + res = -ENOMEM; + task = sas_alloc_task(GFP_KERNEL); + if (!task) + goto out; + + task->dev = dev; + + task->ata_task.fis.command = command; + task->ata_task.fis.features = features; + task->ata_task.fis.device = d2h_fis->device; + task->ata_task.retry_count = 1; + + res = sas_execute_task(task, buffer, size, pci_dma_dir); + + sas_free_task(task); +out: + return res; +} + +static void sas_sata_propagate_sas_addr(struct domain_device *dev) +{ + unsigned long flags; + struct asd_sas_port *port = dev->port; + struct asd_sas_phy *phy; + + BUG_ON(dev->parent); + + memcpy(port->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE); + spin_lock_irqsave(&port->phy_list_lock, flags); + list_for_each_entry(phy, &port->phy_list, port_phy_el) + memcpy(phy->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE); + spin_unlock_irqrestore(&port->phy_list_lock, flags); +} + +#define ATA_IDENTIFY_DEV 0xEC +#define ATA_IDENTIFY_PACKET_DEV 0xA1 +#define ATA_SET_FEATURES 0xEF +#define ATA_FEATURE_PUP_STBY_SPIN_UP 0x07 + +/** + * sas_discover_sata_dev -- discover a STP/SATA device (SATA_DEV) + * @dev: STP/SATA device of interest (ATA/ATAPI) + * + * The LLDD has already been notified of this device, so that we can + * send FISes to it. Here we try to get IDENTIFY DEVICE or IDENTIFY + * PACKET DEVICE, if ATAPI device, so that the LLDD can fine-tune its + * performance for this device. + */ +static int sas_discover_sata_dev(struct domain_device *dev) +{ + int res; + __le16 *identify_x; + u8 command; + + identify_x = kzalloc(512, GFP_KERNEL); + if (!identify_x) + return -ENOMEM; + + if (dev->sata_dev.command_set == ATA_COMMAND_SET) { + dev->sata_dev.identify_device = identify_x; + command = ATA_IDENTIFY_DEV; + } else { + dev->sata_dev.identify_packet_device = identify_x; + command = ATA_IDENTIFY_PACKET_DEV; + } + + res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512, + PCI_DMA_FROMDEVICE); + if (res) + goto out_err; + + /* lives on the media? */ + if (le16_to_cpu(identify_x[0]) & 4) { + /* incomplete response */ + SAS_DPRINTK("sending SET FEATURE/PUP_STBY_SPIN_UP to " + "dev %llx\n", SAS_ADDR(dev->sas_addr)); + if (!le16_to_cpu(identify_x[83] & (1<<6))) + goto cont1; + res = sas_issue_ata_cmd(dev, ATA_SET_FEATURES, + ATA_FEATURE_PUP_STBY_SPIN_UP, + NULL, 0, PCI_DMA_NONE); + if (res) + goto cont1; + + schedule_timeout_interruptible(5*HZ); /* More time? */ + res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512, + PCI_DMA_FROMDEVICE); + if (res) + goto out_err; + } +cont1: + /* Get WWN */ + if (dev->port->oob_mode != SATA_OOB_MODE) { + memcpy(dev->sas_addr, dev->sata_dev.rps_resp.rps.stp_sas_addr, + SAS_ADDR_SIZE); + } else if (dev->sata_dev.command_set == ATA_COMMAND_SET && + (le16_to_cpu(dev->sata_dev.identify_device[108]) & 0xF000) + == 0x5000) { + int i; + + for (i = 0; i < 4; i++) { + dev->sas_addr[2*i] = + (le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0xFF00) >> 8; + dev->sas_addr[2*i+1] = + le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0x00FF; + } + } + sas_hash_addr(dev->hashed_sas_addr, dev->sas_addr); + if (!dev->parent) + sas_sata_propagate_sas_addr(dev); + + /* XXX Hint: register this SATA device with SATL. + When this returns, dev->sata_dev->lu is alive and + present. + sas_satl_register_dev(dev); + */ + return 0; +out_err: + dev->sata_dev.identify_packet_device = NULL; + dev->sata_dev.identify_device = NULL; + kfree(identify_x); + return res; +} + +static int sas_discover_sata_pm(struct domain_device *dev) +{ + return -ENODEV; +} + +int sas_notify_lldd_dev_found(struct domain_device *dev) +{ + int res = 0; + struct sas_ha_struct *sas_ha = dev->port->ha; + struct Scsi_Host *shost = sas_ha->core.shost; + struct sas_internal *i = to_sas_internal(shost->transportt); + + if (i->dft->lldd_dev_found) { + res = i->dft->lldd_dev_found(dev); + if (res) { + printk("sas: driver on pcidev %s cannot handle " + "device %llx, error:%d\n", + pci_name(sas_ha->pcidev), + SAS_ADDR(dev->sas_addr), res); + } + } + return res; +} + + +void sas_notify_lldd_dev_gone(struct domain_device *dev) +{ + struct sas_ha_struct *sas_ha = dev->port->ha; + struct Scsi_Host *shost = sas_ha->core.shost; + struct sas_internal *i = to_sas_internal(shost->transportt); + + if (i->dft->lldd_dev_gone) + i->dft->lldd_dev_gone(dev); +} + +/* ---------- Common/dispatchers ---------- */ + +/** + * sas_discover_sata -- discover an STP/SATA domain device + * @dev: pointer to struct domain_device of interest + * + * First we notify the LLDD of this device, so we can send frames to + * it. Then depending on the type of device we call the appropriate + * discover functions. Once device discover is done, we notify the + * LLDD so that it can fine-tune its parameters for the device, by + * removing it and then adding it. That is, the second time around, + * the driver would have certain fields, that it is looking at, set. + * Finally we initialize the kobj so that the device can be added to + * the system at registration time. Devices directly attached to a HA + * port, have no parents. All other devices do, and should have their + * "parent" pointer set appropriately before calling this function. + */ +int sas_discover_sata(struct domain_device *dev) +{ + int res; + + sas_get_ata_command_set(dev); + + res = sas_notify_lldd_dev_found(dev); + if (res) + return res; + + switch (dev->dev_type) { + case SATA_DEV: + res = sas_discover_sata_dev(dev); + break; + case SATA_PM: + res = sas_discover_sata_pm(dev); + break; + default: + break; + } + + sas_notify_lldd_dev_gone(dev); + if (!res) { + sas_notify_lldd_dev_found(dev); + } + return res; +} + +/** + * sas_discover_end_dev -- discover an end device (SSP, etc) + * @end: pointer to domain device of interest + * + * See comment in sas_discover_sata(). + */ +int sas_discover_end_dev(struct domain_device *dev) +{ + int res; + + res = sas_notify_lldd_dev_found(dev); + if (res) + return res; + + res = sas_rphy_add(dev->rphy); + if (res) + goto out_err; + + /* do this to get the end device port attributes which will have + * been scanned in sas_rphy_add */ + sas_notify_lldd_dev_gone(dev); + sas_notify_lldd_dev_found(dev); + + return 0; + +out_err: + sas_notify_lldd_dev_gone(dev); + return res; +} + +/* ---------- Device registration and unregistration ---------- */ + +static inline void sas_unregister_common_dev(struct domain_device *dev) +{ + sas_notify_lldd_dev_gone(dev); + if (!dev->parent) + dev->port->port_dev = NULL; + else + list_del_init(&dev->siblings); + list_del_init(&dev->dev_list_node); +} + +void sas_unregister_dev(struct domain_device *dev) +{ + if (dev->rphy) { + sas_remove_children(&dev->rphy->dev); + sas_rphy_delete(dev->rphy); + dev->rphy = NULL; + } + if (dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV) { + /* remove the phys and ports, everything else should be gone */ + kfree(dev->ex_dev.ex_phy); + dev->ex_dev.ex_phy = NULL; + } + sas_unregister_common_dev(dev); +} + +void sas_unregister_domain_devices(struct asd_sas_port *port) +{ + struct domain_device *dev, *n; + + list_for_each_entry_safe_reverse(dev,n,&port->dev_list,dev_list_node) + sas_unregister_dev(dev); + + port->port->rphy = NULL; + +} + +/* ---------- Discovery and Revalidation ---------- */ + +/** + * sas_discover_domain -- discover the domain + * @port: port to the domain of interest + * + * NOTE: this process _must_ quit (return) as soon as any connection + * errors are encountered. Connection recovery is done elsewhere. + * Discover process only interrogates devices in order to discover the + * domain. + */ +static void sas_discover_domain(void *data) +{ + int error = 0; + struct asd_sas_port *port = data; + + sas_begin_event(DISCE_DISCOVER_DOMAIN, &port->disc.disc_event_lock, + &port->disc.pending); + + if (port->port_dev) + return ; + else { + error = sas_get_port_device(port); + if (error) + return; + } + + SAS_DPRINTK("DOING DISCOVERY on port %d, pid:%d\n", port->id, + current->pid); + + switch (port->port_dev->dev_type) { + case SAS_END_DEV: + error = sas_discover_end_dev(port->port_dev); + break; + case EDGE_DEV: + case FANOUT_DEV: + error = sas_discover_root_expander(port->port_dev); + break; + case SATA_DEV: + case SATA_PM: + error = sas_discover_sata(port->port_dev); + break; + default: + SAS_DPRINTK("unhandled device %d\n", port->port_dev->dev_type); + break; + } + + if (error) { + kfree(port->port_dev); /* not kobject_register-ed yet */ + port->port_dev = NULL; + } + + SAS_DPRINTK("DONE DISCOVERY on port %d, pid:%d, result:%d\n", port->id, + current->pid, error); +} + +static void sas_revalidate_domain(void *data) +{ + int res = 0; + struct asd_sas_port *port = data; + + sas_begin_event(DISCE_REVALIDATE_DOMAIN, &port->disc.disc_event_lock, + &port->disc.pending); + + SAS_DPRINTK("REVALIDATING DOMAIN on port %d, pid:%d\n", port->id, + current->pid); + if (port->port_dev) + res = sas_ex_revalidate_domain(port->port_dev); + + SAS_DPRINTK("done REVALIDATING DOMAIN on port %d, pid:%d, res 0x%x\n", + port->id, current->pid, res); +} + +/* ---------- Events ---------- */ + +int sas_discover_event(struct asd_sas_port *port, enum discover_event ev) +{ + struct sas_discovery *disc; + + if (!port) + return 0; + disc = &port->disc; + + BUG_ON(ev >= DISC_NUM_EVENTS); + + sas_queue_event(ev, &disc->disc_event_lock, &disc->pending, + &disc->disc_work[ev], port->ha->core.shost); + + return 0; +} + +/** + * sas_init_disc -- initialize the discovery struct in the port + * @port: pointer to struct port + * + * Called when the ports are being initialized. + */ +void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *port) +{ + int i; + + static void (*sas_event_fns[DISC_NUM_EVENTS])(void *) = { + [DISCE_DISCOVER_DOMAIN] = sas_discover_domain, + [DISCE_REVALIDATE_DOMAIN] = sas_revalidate_domain, + }; + + spin_lock_init(&disc->disc_event_lock); + disc->pending = 0; + for (i = 0; i < DISC_NUM_EVENTS; i++) + INIT_WORK(&disc->disc_work[i], sas_event_fns[i], port); +} diff --git a/drivers/scsi/libsas/sas_dump.c b/drivers/scsi/libsas/sas_dump.c new file mode 100644 index 00000000000..f1246d2c9be --- /dev/null +++ b/drivers/scsi/libsas/sas_dump.c @@ -0,0 +1,76 @@ +/* + * Serial Attached SCSI (SAS) Dump/Debugging routines + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include "sas_dump.h" + +#ifdef SAS_DEBUG + +static const char *sas_hae_str[] = { + [0] = "HAE_RESET", +}; + +static const char *sas_porte_str[] = { + [0] = "PORTE_BYTES_DMAED", + [1] = "PORTE_BROADCAST_RCVD", + [2] = "PORTE_LINK_RESET_ERR", + [3] = "PORTE_TIMER_EVENT", + [4] = "PORTE_HARD_RESET", +}; + +static const char *sas_phye_str[] = { + [0] = "PHYE_LOSS_OF_SIGNAL", + [1] = "PHYE_OOB_DONE", + [2] = "PHYE_OOB_ERROR", + [3] = "PHYE_SPINUP_HOLD", +}; + +void sas_dprint_porte(int phyid, enum port_event pe) +{ + SAS_DPRINTK("phy%d: port event: %s\n", phyid, sas_porte_str[pe]); +} +void sas_dprint_phye(int phyid, enum phy_event pe) +{ + SAS_DPRINTK("phy%d: phy event: %s\n", phyid, sas_phye_str[pe]); +} + +void sas_dprint_hae(struct sas_ha_struct *sas_ha, enum ha_event he) +{ + SAS_DPRINTK("ha %s: %s event\n", pci_name(sas_ha->pcidev), + sas_hae_str[he]); +} + +void sas_dump_port(struct asd_sas_port *port) +{ + SAS_DPRINTK("port%d: class:0x%x\n", port->id, port->class); + SAS_DPRINTK("port%d: sas_addr:%llx\n", port->id, + SAS_ADDR(port->sas_addr)); + SAS_DPRINTK("port%d: attached_sas_addr:%llx\n", port->id, + SAS_ADDR(port->attached_sas_addr)); + SAS_DPRINTK("port%d: iproto:0x%x\n", port->id, port->iproto); + SAS_DPRINTK("port%d: tproto:0x%x\n", port->id, port->tproto); + SAS_DPRINTK("port%d: oob_mode:0x%x\n", port->id, port->oob_mode); + SAS_DPRINTK("port%d: num_phys:%d\n", port->id, port->num_phys); +} + +#endif /* SAS_DEBUG */ diff --git a/drivers/scsi/libsas/sas_dump.h b/drivers/scsi/libsas/sas_dump.h new file mode 100644 index 00000000000..47b45d4f525 --- /dev/null +++ b/drivers/scsi/libsas/sas_dump.h @@ -0,0 +1,42 @@ +/* + * Serial Attached SCSI (SAS) Dump/Debugging routines header file + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include "sas_internal.h" + +#ifdef SAS_DEBUG + +void sas_dprint_porte(int phyid, enum port_event pe); +void sas_dprint_phye(int phyid, enum phy_event pe); +void sas_dprint_hae(struct sas_ha_struct *sas_ha, enum ha_event he); +void sas_dump_port(struct asd_sas_port *port); + +#else /* SAS_DEBUG */ + +static inline void sas_dprint_porte(int phyid, enum port_event pe) { } +static inline void sas_dprint_phye(int phyid, enum phy_event pe) { } +static inline void sas_dprint_hae(struct sas_ha_struct *sas_ha, + enum ha_event he) { } +static inline void sas_dump_port(struct asd_sas_port *port) { } + +#endif /* SAS_DEBUG */ diff --git a/drivers/scsi/libsas/sas_event.c b/drivers/scsi/libsas/sas_event.c new file mode 100644 index 00000000000..19110ed1c89 --- /dev/null +++ b/drivers/scsi/libsas/sas_event.c @@ -0,0 +1,75 @@ +/* + * Serial Attached SCSI (SAS) Event processing + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include <scsi/scsi_host.h> +#include "sas_internal.h" +#include "sas_dump.h" + +static void notify_ha_event(struct sas_ha_struct *sas_ha, enum ha_event event) +{ + BUG_ON(event >= HA_NUM_EVENTS); + + sas_queue_event(event, &sas_ha->event_lock, &sas_ha->pending, + &sas_ha->ha_events[event], sas_ha->core.shost); +} + +static void notify_port_event(struct asd_sas_phy *phy, enum port_event event) +{ + struct sas_ha_struct *ha = phy->ha; + + BUG_ON(event >= PORT_NUM_EVENTS); + + sas_queue_event(event, &ha->event_lock, &phy->port_events_pending, + &phy->port_events[event], ha->core.shost); +} + +static void notify_phy_event(struct asd_sas_phy *phy, enum phy_event event) +{ + struct sas_ha_struct *ha = phy->ha; + + BUG_ON(event >= PHY_NUM_EVENTS); + + sas_queue_event(event, &ha->event_lock, &phy->phy_events_pending, + &phy->phy_events[event], ha->core.shost); +} + +int sas_init_events(struct sas_ha_struct *sas_ha) +{ + static void (*sas_ha_event_fns[HA_NUM_EVENTS])(void *) = { + [HAE_RESET] = sas_hae_reset, + }; + + int i; + + spin_lock_init(&sas_ha->event_lock); + + for (i = 0; i < HA_NUM_EVENTS; i++) + INIT_WORK(&sas_ha->ha_events[i], sas_ha_event_fns[i], sas_ha); + + sas_ha->notify_ha_event = notify_ha_event; + sas_ha->notify_port_event = notify_port_event; + sas_ha->notify_phy_event = notify_phy_event; + + return 0; +} diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c new file mode 100644 index 00000000000..30b8014bcc7 --- /dev/null +++ b/drivers/scsi/libsas/sas_expander.c @@ -0,0 +1,1855 @@ +/* + * Serial Attached SCSI (SAS) Expander discovery and configuration + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include <linux/pci.h> +#include <linux/scatterlist.h> + +#include "sas_internal.h" + +#include <scsi/scsi_transport.h> +#include <scsi/scsi_transport_sas.h> +#include "../scsi_sas_internal.h" + +static int sas_discover_expander(struct domain_device *dev); +static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr); +static int sas_configure_phy(struct domain_device *dev, int phy_id, + u8 *sas_addr, int include); +static int sas_disable_routing(struct domain_device *dev, u8 *sas_addr); + +#if 0 +/* FIXME: smp needs to migrate into the sas class */ +static ssize_t smp_portal_read(struct kobject *, char *, loff_t, size_t); +static ssize_t smp_portal_write(struct kobject *, char *, loff_t, size_t); +#endif + +/* ---------- SMP task management ---------- */ + +static void smp_task_timedout(unsigned long _task) +{ + struct sas_task *task = (void *) _task; + unsigned long flags; + + spin_lock_irqsave(&task->task_state_lock, flags); + if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) + task->task_state_flags |= SAS_TASK_STATE_ABORTED; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + complete(&task->completion); +} + +static void smp_task_done(struct sas_task *task) +{ + if (!del_timer(&task->timer)) + return; + complete(&task->completion); +} + +/* Give it some long enough timeout. In seconds. */ +#define SMP_TIMEOUT 10 + +static int smp_execute_task(struct domain_device *dev, void *req, int req_size, + void *resp, int resp_size) +{ + int res; + struct sas_task *task = sas_alloc_task(GFP_KERNEL); + struct sas_internal *i = + to_sas_internal(dev->port->ha->core.shost->transportt); + + if (!task) + return -ENOMEM; + + task->dev = dev; + task->task_proto = dev->tproto; + sg_init_one(&task->smp_task.smp_req, req, req_size); + sg_init_one(&task->smp_task.smp_resp, resp, resp_size); + + task->task_done = smp_task_done; + + task->timer.data = (unsigned long) task; + task->timer.function = smp_task_timedout; + task->timer.expires = jiffies + SMP_TIMEOUT*HZ; + add_timer(&task->timer); + + res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL); + + if (res) { + del_timer(&task->timer); + SAS_DPRINTK("executing SMP task failed:%d\n", res); + goto ex_err; + } + + wait_for_completion(&task->completion); + res = -ETASK; + if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) { + SAS_DPRINTK("smp task timed out or aborted\n"); + i->dft->lldd_abort_task(task); + if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { + SAS_DPRINTK("SMP task aborted and not done\n"); + goto ex_err; + } + } + if (task->task_status.resp == SAS_TASK_COMPLETE && + task->task_status.stat == SAM_GOOD) + res = 0; + else + SAS_DPRINTK("%s: task to dev %016llx response: 0x%x " + "status 0x%x\n", __FUNCTION__, + SAS_ADDR(dev->sas_addr), + task->task_status.resp, + task->task_status.stat); +ex_err: + sas_free_task(task); + return res; +} + +/* ---------- Allocations ---------- */ + +static inline void *alloc_smp_req(int size) +{ + u8 *p = kzalloc(size, GFP_KERNEL); + if (p) + p[0] = SMP_REQUEST; + return p; +} + +static inline void *alloc_smp_resp(int size) +{ + return kzalloc(size, GFP_KERNEL); +} + +/* ---------- Expander configuration ---------- */ + +static void sas_set_ex_phy(struct domain_device *dev, int phy_id, + void *disc_resp) +{ + struct expander_device *ex = &dev->ex_dev; + struct ex_phy *phy = &ex->ex_phy[phy_id]; + struct smp_resp *resp = disc_resp; + struct discover_resp *dr = &resp->disc; + struct sas_rphy *rphy = dev->rphy; + int rediscover = (phy->phy != NULL); + + if (!rediscover) { + phy->phy = sas_phy_alloc(&rphy->dev, phy_id); + + /* FIXME: error_handling */ + BUG_ON(!phy->phy); + } + + switch (resp->result) { + case SMP_RESP_PHY_VACANT: + phy->phy_state = PHY_VACANT; + return; + default: + phy->phy_state = PHY_NOT_PRESENT; + return; + case SMP_RESP_FUNC_ACC: + phy->phy_state = PHY_EMPTY; /* do not know yet */ + break; + } + + phy->phy_id = phy_id; + phy->attached_dev_type = dr->attached_dev_type; + phy->linkrate = dr->linkrate; + phy->attached_sata_host = dr->attached_sata_host; + phy->attached_sata_dev = dr->attached_sata_dev; + phy->attached_sata_ps = dr->attached_sata_ps; + phy->attached_iproto = dr->iproto << 1; + phy->attached_tproto = dr->tproto << 1; + memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE); + phy->attached_phy_id = dr->attached_phy_id; + phy->phy_change_count = dr->change_count; + phy->routing_attr = dr->routing_attr; + phy->virtual = dr->virtual; + phy->last_da_index = -1; + + phy->phy->identify.initiator_port_protocols = phy->attached_iproto; + phy->phy->identify.target_port_protocols = phy->attached_tproto; + phy->phy->identify.phy_identifier = phy_id; + phy->phy->minimum_linkrate_hw = dr->hmin_linkrate; + phy->phy->maximum_linkrate_hw = dr->hmax_linkrate; + phy->phy->minimum_linkrate = dr->pmin_linkrate; + phy->phy->maximum_linkrate = dr->pmax_linkrate; + phy->phy->negotiated_linkrate = phy->linkrate; + + if (!rediscover) + sas_phy_add(phy->phy); + + SAS_DPRINTK("ex %016llx phy%02d:%c attached: %016llx\n", + SAS_ADDR(dev->sas_addr), phy->phy_id, + phy->routing_attr == TABLE_ROUTING ? 'T' : + phy->routing_attr == DIRECT_ROUTING ? 'D' : + phy->routing_attr == SUBTRACTIVE_ROUTING ? 'S' : '?', + SAS_ADDR(phy->attached_sas_addr)); + + return; +} + +#define DISCOVER_REQ_SIZE 16 +#define DISCOVER_RESP_SIZE 56 + +static int sas_ex_phy_discover(struct domain_device *dev, int single) +{ + struct expander_device *ex = &dev->ex_dev; + int res = 0; + u8 *disc_req; + u8 *disc_resp; + + disc_req = alloc_smp_req(DISCOVER_REQ_SIZE); + if (!disc_req) + return -ENOMEM; + + disc_resp = alloc_smp_req(DISCOVER_RESP_SIZE); + if (!disc_resp) { + kfree(disc_req); + return -ENOMEM; + } + + disc_req[1] = SMP_DISCOVER; + + if (0 <= single && single < ex->num_phys) { + disc_req[9] = single; + res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE, + disc_resp, DISCOVER_RESP_SIZE); + if (res) + goto out_err; + sas_set_ex_phy(dev, single, disc_resp); + } else { + int i; + + for (i = 0; i < ex->num_phys; i++) { + disc_req[9] = i; + res = smp_execute_task(dev, disc_req, + DISCOVER_REQ_SIZE, disc_resp, + DISCOVER_RESP_SIZE); + if (res) + goto out_err; + sas_set_ex_phy(dev, i, disc_resp); + } + } +out_err: + kfree(disc_resp); + kfree(disc_req); + return res; +} + +static int sas_expander_discover(struct domain_device *dev) +{ + struct expander_device *ex = &dev->ex_dev; + int res = -ENOMEM; + + ex->ex_phy = kzalloc(sizeof(*ex->ex_phy)*ex->num_phys, GFP_KERNEL); + if (!ex->ex_phy) + return -ENOMEM; + + res = sas_ex_phy_discover(dev, -1); + if (res) + goto out_err; + + return 0; + out_err: + kfree(ex->ex_phy); + ex->ex_phy = NULL; + return res; +} + +#define MAX_EXPANDER_PHYS 128 + +static void ex_assign_report_general(struct domain_device *dev, + struct smp_resp *resp) +{ + struct report_general_resp *rg = &resp->rg; + + dev->ex_dev.ex_change_count = be16_to_cpu(rg->change_count); + dev->ex_dev.max_route_indexes = be16_to_cpu(rg->route_indexes); + dev->ex_dev.num_phys = min(rg->num_phys, (u8)MAX_EXPANDER_PHYS); + dev->ex_dev.conf_route_table = rg->conf_route_table; + dev->ex_dev.configuring = rg->configuring; + memcpy(dev->ex_dev.enclosure_logical_id, rg->enclosure_logical_id, 8); +} + +#define RG_REQ_SIZE 8 +#define RG_RESP_SIZE 32 + +static int sas_ex_general(struct domain_device *dev) +{ + u8 *rg_req; + struct smp_resp *rg_resp; + int res; + int i; + + rg_req = alloc_smp_req(RG_REQ_SIZE); + if (!rg_req) + return -ENOMEM; + + rg_resp = alloc_smp_resp(RG_RESP_SIZE); + if (!rg_resp) { + kfree(rg_req); + return -ENOMEM; + } + + rg_req[1] = SMP_REPORT_GENERAL; + + for (i = 0; i < 5; i++) { + res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp, + RG_RESP_SIZE); + + if (res) { + SAS_DPRINTK("RG to ex %016llx failed:0x%x\n", + SAS_ADDR(dev->sas_addr), res); + goto out; + } else if (rg_resp->result != SMP_RESP_FUNC_ACC) { + SAS_DPRINTK("RG:ex %016llx returned SMP result:0x%x\n", + SAS_ADDR(dev->sas_addr), rg_resp->result); + res = rg_resp->result; + goto out; + } + + ex_assign_report_general(dev, rg_resp); + + if (dev->ex_dev.configuring) { + SAS_DPRINTK("RG: ex %llx self-configuring...\n", + SAS_ADDR(dev->sas_addr)); + schedule_timeout_interruptible(5*HZ); + } else + break; + } +out: + kfree(rg_req); + kfree(rg_resp); + return res; +} + +static void ex_assign_manuf_info(struct domain_device *dev, void + *_mi_resp) +{ + u8 *mi_resp = _mi_resp; + struct sas_rphy *rphy = dev->rphy; + struct sas_expander_device *edev = rphy_to_expander_device(rphy); + + memcpy(edev->vendor_id, mi_resp + 12, SAS_EXPANDER_VENDOR_ID_LEN); + memcpy(edev->product_id, mi_resp + 20, SAS_EXPANDER_PRODUCT_ID_LEN); + memcpy(edev->product_rev, mi_resp + 36, + SAS_EXPANDER_PRODUCT_REV_LEN); + + if (mi_resp[8] & 1) { + memcpy(edev->component_vendor_id, mi_resp + 40, + SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN); + edev->component_id = mi_resp[48] << 8 | mi_resp[49]; + edev->component_revision_id = mi_resp[50]; + } +} + +#define MI_REQ_SIZE 8 +#define MI_RESP_SIZE 64 + +static int sas_ex_manuf_info(struct domain_device *dev) +{ + u8 *mi_req; + u8 *mi_resp; + int res; + + mi_req = alloc_smp_req(MI_REQ_SIZE); + if (!mi_req) + return -ENOMEM; + + mi_resp = alloc_smp_resp(MI_RESP_SIZE); + if (!mi_resp) { + kfree(mi_req); + return -ENOMEM; + } + + mi_req[1] = SMP_REPORT_MANUF_INFO; + + res = smp_execute_task(dev, mi_req, MI_REQ_SIZE, mi_resp,MI_RESP_SIZE); + if (res) { + SAS_DPRINTK("MI: ex %016llx failed:0x%x\n", + SAS_ADDR(dev->sas_addr), res); + goto out; + } else if (mi_resp[2] != SMP_RESP_FUNC_ACC) { + SAS_DPRINTK("MI ex %016llx returned SMP result:0x%x\n", + SAS_ADDR(dev->sas_addr), mi_resp[2]); + goto out; + } + + ex_assign_manuf_info(dev, mi_resp); +out: + kfree(mi_req); + kfree(mi_resp); + return res; +} + +#define PC_REQ_SIZE 44 +#define PC_RESP_SIZE 8 + +int sas_smp_phy_control(struct domain_device *dev, int phy_id, + enum phy_func phy_func, + struct sas_phy_linkrates *rates) +{ + u8 *pc_req; + u8 *pc_resp; + int res; + + pc_req = alloc_smp_req(PC_REQ_SIZE); + if (!pc_req) + return -ENOMEM; + + pc_resp = alloc_smp_resp(PC_RESP_SIZE); + if (!pc_resp) { + kfree(pc_req); + return -ENOMEM; + } + + pc_req[1] = SMP_PHY_CONTROL; + pc_req[9] = phy_id; + pc_req[10]= phy_func; + if (rates) { + pc_req[32] = rates->minimum_linkrate << 4; + pc_req[33] = rates->maximum_linkrate << 4; + } + + res = smp_execute_task(dev, pc_req, PC_REQ_SIZE, pc_resp,PC_RESP_SIZE); + + kfree(pc_resp); + kfree(pc_req); + return res; +} + +static void sas_ex_disable_phy(struct domain_device *dev, int phy_id) +{ + struct expander_device *ex = &dev->ex_dev; + struct ex_phy *phy = &ex->ex_phy[phy_id]; + + sas_smp_phy_control(dev, phy_id, PHY_FUNC_DISABLE, NULL); + phy->linkrate = SAS_PHY_DISABLED; +} + +static void sas_ex_disable_port(struct domain_device *dev, u8 *sas_addr) +{ + struct expander_device *ex = &dev->ex_dev; + int i; + + for (i = 0; i < ex->num_phys; i++) { + struct ex_phy *phy = &ex->ex_phy[i]; + + if (phy->phy_state == PHY_VACANT || + phy->phy_state == PHY_NOT_PRESENT) + continue; + + if (SAS_ADDR(phy->attached_sas_addr) == SAS_ADDR(sas_addr)) + sas_ex_disable_phy(dev, i); + } +} + +static int sas_dev_present_in_domain(struct asd_sas_port *port, + u8 *sas_addr) +{ + struct domain_device *dev; + + if (SAS_ADDR(port->sas_addr) == SAS_ADDR(sas_addr)) + return 1; + list_for_each_entry(dev, &port->dev_list, dev_list_node) { + if (SAS_ADDR(dev->sas_addr) == SAS_ADDR(sas_addr)) + return 1; + } + return 0; +} + +#define RPEL_REQ_SIZE 16 +#define RPEL_RESP_SIZE 32 +int sas_smp_get_phy_events(struct sas_phy *phy) +{ + int res; + struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent); + struct domain_device *dev = sas_find_dev_by_rphy(rphy); + u8 *req = alloc_smp_req(RPEL_REQ_SIZE); + u8 *resp = kzalloc(RPEL_RESP_SIZE, GFP_KERNEL); + + if (!resp) + return -ENOMEM; + + req[1] = SMP_REPORT_PHY_ERR_LOG; + req[9] = phy->number; + + res = smp_execute_task(dev, req, RPEL_REQ_SIZE, + resp, RPEL_RESP_SIZE); + + if (!res) + goto out; + + phy->invalid_dword_count = scsi_to_u32(&resp[12]); + phy->running_disparity_error_count = scsi_to_u32(&resp[16]); + phy->loss_of_dword_sync_count = scsi_to_u32(&resp[20]); + phy->phy_reset_problem_count = scsi_to_u32(&resp[24]); + + out: + kfree(resp); + return res; + +} + +#define RPS_REQ_SIZE 16 +#define RPS_RESP_SIZE 60 + +static int sas_get_report_phy_sata(struct domain_device *dev, + int phy_id, + struct smp_resp *rps_resp) +{ + int res; + u8 *rps_req = alloc_smp_req(RPS_REQ_SIZE); + + if (!rps_req) + return -ENOMEM; + + rps_req[1] = SMP_REPORT_PHY_SATA; + rps_req[9] = phy_id; + + res = smp_execute_task(dev, rps_req, RPS_REQ_SIZE, + rps_resp, RPS_RESP_SIZE); + + kfree(rps_req); + return 0; +} + +static void sas_ex_get_linkrate(struct domain_device *parent, + struct domain_device *child, + struct ex_phy *parent_phy) +{ + struct expander_device *parent_ex = &parent->ex_dev; + struct sas_port *port; + int i; + + child->pathways = 0; + + port = parent_phy->port; + + for (i = 0; i < parent_ex->num_phys; i++) { + struct ex_phy *phy = &parent_ex->ex_phy[i]; + + if (phy->phy_state == PHY_VACANT || + phy->phy_state == PHY_NOT_PRESENT) + continue; + + if (SAS_ADDR(phy->attached_sas_addr) == + SAS_ADDR(child->sas_addr)) { + + child->min_linkrate = min(parent->min_linkrate, + phy->linkrate); + child->max_linkrate = max(parent->max_linkrate, + phy->linkrate); + child->pathways++; + sas_port_add_phy(port, phy->phy); + } + } + child->linkrate = min(parent_phy->linkrate, child->max_linkrate); + child->pathways = min(child->pathways, parent->pathways); +} + +static struct domain_device *sas_ex_discover_end_dev( + struct domain_device *parent, int phy_id) +{ + struct expander_device *parent_ex = &parent->ex_dev; + struct ex_phy *phy = &parent_ex->ex_phy[phy_id]; + struct domain_device *child = NULL; + struct sas_rphy *rphy; + int res; + + if (phy->attached_sata_host || phy->attached_sata_ps) + return NULL; + + child = kzalloc(sizeof(*child), GFP_KERNEL); + if (!child) + return NULL; + + child->parent = parent; + child->port = parent->port; + child->iproto = phy->attached_iproto; + memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE); + sas_hash_addr(child->hashed_sas_addr, child->sas_addr); + phy->port = sas_port_alloc(&parent->rphy->dev, phy_id); + BUG_ON(!phy->port); + /* FIXME: better error handling*/ + BUG_ON(sas_port_add(phy->port) != 0); + sas_ex_get_linkrate(parent, child, phy); + + if ((phy->attached_tproto & SAS_PROTO_STP) || phy->attached_sata_dev) { + child->dev_type = SATA_DEV; + if (phy->attached_tproto & SAS_PROTO_STP) + child->tproto = phy->attached_tproto; + if (phy->attached_sata_dev) + child->tproto |= SATA_DEV; + res = sas_get_report_phy_sata(parent, phy_id, + &child->sata_dev.rps_resp); + if (res) { + SAS_DPRINTK("report phy sata to %016llx:0x%x returned " + "0x%x\n", SAS_ADDR(parent->sas_addr), + phy_id, res); + kfree(child); + return NULL; + } + memcpy(child->frame_rcvd, &child->sata_dev.rps_resp.rps.fis, + sizeof(struct dev_to_host_fis)); + sas_init_dev(child); + res = sas_discover_sata(child); + if (res) { + SAS_DPRINTK("sas_discover_sata() for device %16llx at " + "%016llx:0x%x returned 0x%x\n", + SAS_ADDR(child->sas_addr), + SAS_ADDR(parent->sas_addr), phy_id, res); + kfree(child); + return NULL; + } + } else if (phy->attached_tproto & SAS_PROTO_SSP) { + child->dev_type = SAS_END_DEV; + rphy = sas_end_device_alloc(phy->port); + /* FIXME: error handling */ + BUG_ON(!rphy); + child->tproto = phy->attached_tproto; + sas_init_dev(child); + + child->rphy = rphy; + sas_fill_in_rphy(child, rphy); + + spin_lock(&parent->port->dev_list_lock); + list_add_tail(&child->dev_list_node, &parent->port->dev_list); + spin_unlock(&parent->port->dev_list_lock); + + res = sas_discover_end_dev(child); + if (res) { + SAS_DPRINTK("sas_discover_end_dev() for device %16llx " + "at %016llx:0x%x returned 0x%x\n", + SAS_ADDR(child->sas_addr), + SAS_ADDR(parent->sas_addr), phy_id, res); + /* FIXME: this kfrees list elements without removing them */ + //kfree(child); + return NULL; + } + } else { + SAS_DPRINTK("target proto 0x%x at %016llx:0x%x not handled\n", + phy->attached_tproto, SAS_ADDR(parent->sas_addr), + phy_id); + } + + list_add_tail(&child->siblings, &parent_ex->children); + return child; +} + +static struct domain_device *sas_ex_discover_expander( + struct domain_device *parent, int phy_id) +{ + struct sas_expander_device *parent_ex = rphy_to_expander_device(parent->rphy); + struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id]; + struct domain_device *child = NULL; + struct sas_rphy *rphy; + struct sas_expander_device *edev; + struct asd_sas_port *port; + int res; + + if (phy->routing_attr == DIRECT_ROUTING) { + SAS_DPRINTK("ex %016llx:0x%x:D <--> ex %016llx:0x%x is not " + "allowed\n", + SAS_ADDR(parent->sas_addr), phy_id, + SAS_ADDR(phy->attached_sas_addr), + phy->attached_phy_id); + return NULL; + } + child = kzalloc(sizeof(*child), GFP_KERNEL); + if (!child) + return NULL; + + phy->port = sas_port_alloc(&parent->rphy->dev, phy_id); + /* FIXME: better error handling */ + BUG_ON(sas_port_add(phy->port) != 0); + + + switch (phy->attached_dev_type) { + case EDGE_DEV: + rphy = sas_expander_alloc(phy->port, + SAS_EDGE_EXPANDER_DEVICE); + break; + case FANOUT_DEV: + rphy = sas_expander_alloc(phy->port, + SAS_FANOUT_EXPANDER_DEVICE); + break; + default: + rphy = NULL; /* shut gcc up */ + BUG(); + } + port = parent->port; + child->rphy = rphy; + edev = rphy_to_expander_device(rphy); + child->dev_type = phy->attached_dev_type; + child->parent = parent; + child->port = port; + child->iproto = phy->attached_iproto; + child->tproto = phy->attached_tproto; + memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE); + sas_hash_addr(child->hashed_sas_addr, child->sas_addr); + sas_ex_get_linkrate(parent, child, phy); + edev->level = parent_ex->level + 1; + parent->port->disc.max_level = max(parent->port->disc.max_level, + edev->level); + sas_init_dev(child); + sas_fill_in_rphy(child, rphy); + sas_rphy_add(rphy); + + spin_lock(&parent->port->dev_list_lock); + list_add_tail(&child->dev_list_node, &parent->port->dev_list); + spin_unlock(&parent->port->dev_list_lock); + + res = sas_discover_expander(child); + if (res) { + kfree(child); + return NULL; + } + list_add_tail(&child->siblings, &parent->ex_dev.children); + return child; +} + +static int sas_ex_discover_dev(struct domain_device *dev, int phy_id) +{ + struct expander_device *ex = &dev->ex_dev; + struct ex_phy *ex_phy = &ex->ex_phy[phy_id]; + struct domain_device *child = NULL; + int res = 0; + + /* Phy state */ + if (ex_phy->linkrate == SAS_SATA_SPINUP_HOLD) { + if (!sas_smp_phy_control(dev, phy_id, PHY_FUNC_LINK_RESET, NULL)) + res = sas_ex_phy_discover(dev, phy_id); + if (res) + return res; + } + + /* Parent and domain coherency */ + if (!dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) == + SAS_ADDR(dev->port->sas_addr))) { + sas_add_parent_port(dev, phy_id); + return 0; + } + if (dev->parent && (SAS_ADDR(ex_phy->attached_sas_addr) == + SAS_ADDR(dev->parent->sas_addr))) { + sas_add_parent_port(dev, phy_id); + if (ex_phy->routing_attr == TABLE_ROUTING) + sas_configure_phy(dev, phy_id, dev->port->sas_addr, 1); + return 0; + } + + if (sas_dev_present_in_domain(dev->port, ex_phy->attached_sas_addr)) + sas_ex_disable_port(dev, ex_phy->attached_sas_addr); + + if (ex_phy->attached_dev_type == NO_DEVICE) { + if (ex_phy->routing_attr == DIRECT_ROUTING) { + memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE); + sas_configure_routing(dev, ex_phy->attached_sas_addr); + } + return 0; + } else if (ex_phy->linkrate == SAS_LINK_RATE_UNKNOWN) + return 0; + + if (ex_phy->attached_dev_type != SAS_END_DEV && + ex_phy->attached_dev_type != FANOUT_DEV && + ex_phy->attached_dev_type != EDGE_DEV) { + SAS_DPRINTK("unknown device type(0x%x) attached to ex %016llx " + "phy 0x%x\n", ex_phy->attached_dev_type, + SAS_ADDR(dev->sas_addr), + phy_id); + return 0; + } + + res = sas_configure_routing(dev, ex_phy->attached_sas_addr); + if (res) { + SAS_DPRINTK("configure routing for dev %016llx " + "reported 0x%x. Forgotten\n", + SAS_ADDR(ex_phy->attached_sas_addr), res); + sas_disable_routing(dev, ex_phy->attached_sas_addr); + return res; + } + + switch (ex_phy->attached_dev_type) { + case SAS_END_DEV: + child = sas_ex_discover_end_dev(dev, phy_id); + break; + case FANOUT_DEV: + if (SAS_ADDR(dev->port->disc.fanout_sas_addr)) { + SAS_DPRINTK("second fanout expander %016llx phy 0x%x " + "attached to ex %016llx phy 0x%x\n", + SAS_ADDR(ex_phy->attached_sas_addr), + ex_phy->attached_phy_id, + SAS_ADDR(dev->sas_addr), + phy_id); + sas_ex_disable_phy(dev, phy_id); + break; + } else + memcpy(dev->port->disc.fanout_sas_addr, + ex_phy->attached_sas_addr, SAS_ADDR_SIZE); + /* fallthrough */ + case EDGE_DEV: + child = sas_ex_discover_expander(dev, phy_id); + break; + default: + break; + } + + if (child) { + int i; + + for (i = 0; i < ex->num_phys; i++) { + if (ex->ex_phy[i].phy_state == PHY_VACANT || + ex->ex_phy[i].phy_state == PHY_NOT_PRESENT) + continue; + + if (SAS_ADDR(ex->ex_phy[i].attached_sas_addr) == + SAS_ADDR(child->sas_addr)) + ex->ex_phy[i].phy_state= PHY_DEVICE_DISCOVERED; + } + } + + return res; +} + +static int sas_find_sub_addr(struct domain_device *dev, u8 *sub_addr) +{ + struct expander_device *ex = &dev->ex_dev; + int i; + + for (i = 0; i < ex->num_phys; i++) { + struct ex_phy *phy = &ex->ex_phy[i]; + + if (phy->phy_state == PHY_VACANT || + phy->phy_state == PHY_NOT_PRESENT) + continue; + + if ((phy->attached_dev_type == EDGE_DEV || + phy->attached_dev_type == FANOUT_DEV) && + phy->routing_attr == SUBTRACTIVE_ROUTING) { + + memcpy(sub_addr, phy->attached_sas_addr,SAS_ADDR_SIZE); + + return 1; + } + } + return 0; +} + +static int sas_check_level_subtractive_boundary(struct domain_device *dev) +{ + struct expander_device *ex = &dev->ex_dev; + struct domain_device *child; + u8 sub_addr[8] = {0, }; + + list_for_each_entry(child, &ex->children, siblings) { + if (child->dev_type != EDGE_DEV && + child->dev_type != FANOUT_DEV) + continue; + if (sub_addr[0] == 0) { + sas_find_sub_addr(child, sub_addr); + continue; + } else { + u8 s2[8]; + + if (sas_find_sub_addr(child, s2) && + (SAS_ADDR(sub_addr) != SAS_ADDR(s2))) { + + SAS_DPRINTK("ex %016llx->%016llx-?->%016llx " + "diverges from subtractive " + "boundary %016llx\n", + SAS_ADDR(dev->sas_addr), + SAS_ADDR(child->sas_addr), + SAS_ADDR(s2), + SAS_ADDR(sub_addr)); + + sas_ex_disable_port(child, s2); + } + } + } + return 0; +} +/** + * sas_ex_discover_devices -- discover devices attached to this expander + * dev: pointer to the expander domain device + * single: if you want to do a single phy, else set to -1; + * + * Configure this expander for use with its devices and register the + * devices of this expander. + */ +static int sas_ex_discover_devices(struct domain_device *dev, int single) +{ + struct expander_device *ex = &dev->ex_dev; + int i = 0, end = ex->num_phys; + int res = 0; + + if (0 <= single && single < end) { + i = single; + end = i+1; + } + + for ( ; i < end; i++) { + struct ex_phy *ex_phy = &ex->ex_phy[i]; + + if (ex_phy->phy_state == PHY_VACANT || + ex_phy->phy_state == PHY_NOT_PRESENT || + ex_phy->phy_state == PHY_DEVICE_DISCOVERED) + continue; + + switch (ex_phy->linkrate) { + case SAS_PHY_DISABLED: + case SAS_PHY_RESET_PROBLEM: + case SAS_SATA_PORT_SELECTOR: + continue; + default: + res = sas_ex_discover_dev(dev, i); + if (res) + break; + continue; + } + } + + if (!res) + sas_check_level_subtractive_boundary(dev); + + return res; +} + +static int sas_check_ex_subtractive_boundary(struct domain_device *dev) +{ + struct expander_device *ex = &dev->ex_dev; + int i; + u8 *sub_sas_addr = NULL; + + if (dev->dev_type != EDGE_DEV) + return 0; + + for (i = 0; i < ex->num_phys; i++) { + struct ex_phy *phy = &ex->ex_phy[i]; + + if (phy->phy_state == PHY_VACANT || + phy->phy_state == PHY_NOT_PRESENT) + continue; + + if ((phy->attached_dev_type == FANOUT_DEV || + phy->attached_dev_type == EDGE_DEV) && + phy->routing_attr == SUBTRACTIVE_ROUTING) { + + if (!sub_sas_addr) + sub_sas_addr = &phy->attached_sas_addr[0]; + else if (SAS_ADDR(sub_sas_addr) != + SAS_ADDR(phy->attached_sas_addr)) { + + SAS_DPRINTK("ex %016llx phy 0x%x " + "diverges(%016llx) on subtractive " + "boundary(%016llx). Disabled\n", + SAS_ADDR(dev->sas_addr), i, + SAS_ADDR(phy->attached_sas_addr), + SAS_ADDR(sub_sas_addr)); + sas_ex_disable_phy(dev, i); + } + } + } + return 0; +} + +static void sas_print_parent_topology_bug(struct domain_device *child, + struct ex_phy *parent_phy, + struct ex_phy *child_phy) +{ + static const char ra_char[] = { + [DIRECT_ROUTING] = 'D', + [SUBTRACTIVE_ROUTING] = 'S', + [TABLE_ROUTING] = 'T', + }; + static const char *ex_type[] = { + [EDGE_DEV] = "edge", + [FANOUT_DEV] = "fanout", + }; + struct domain_device *parent = child->parent; + + sas_printk("%s ex %016llx phy 0x%x <--> %s ex %016llx phy 0x%x " + "has %c:%c routing link!\n", + + ex_type[parent->dev_type], + SAS_ADDR(parent->sas_addr), + parent_phy->phy_id, + + ex_type[child->dev_type], + SAS_ADDR(child->sas_addr), + child_phy->phy_id, + + ra_char[parent_phy->routing_attr], + ra_char[child_phy->routing_attr]); +} + +static int sas_check_eeds(struct domain_device *child, + struct ex_phy *parent_phy, + struct ex_phy *child_phy) +{ + int res = 0; + struct domain_device *parent = child->parent; + + if (SAS_ADDR(parent->port->disc.fanout_sas_addr) != 0) { + res = -ENODEV; + SAS_DPRINTK("edge ex %016llx phy S:0x%x <--> edge ex %016llx " + "phy S:0x%x, while there is a fanout ex %016llx\n", + SAS_ADDR(parent->sas_addr), + parent_phy->phy_id, + SAS_ADDR(child->sas_addr), + child_phy->phy_id, + SAS_ADDR(parent->port->disc.fanout_sas_addr)); + } else if (SAS_ADDR(parent->port->disc.eeds_a) == 0) { + memcpy(parent->port->disc.eeds_a, parent->sas_addr, + SAS_ADDR_SIZE); + memcpy(parent->port->disc.eeds_b, child->sas_addr, + SAS_ADDR_SIZE); + } else if (((SAS_ADDR(parent->port->disc.eeds_a) == + SAS_ADDR(parent->sas_addr)) || + (SAS_ADDR(parent->port->disc.eeds_a) == + SAS_ADDR(child->sas_addr))) + && + ((SAS_ADDR(parent->port->disc.eeds_b) == + SAS_ADDR(parent->sas_addr)) || + (SAS_ADDR(parent->port->disc.eeds_b) == + SAS_ADDR(child->sas_addr)))) + ; + else { + res = -ENODEV; + SAS_DPRINTK("edge ex %016llx phy 0x%x <--> edge ex %016llx " + "phy 0x%x link forms a third EEDS!\n", + SAS_ADDR(parent->sas_addr), + parent_phy->phy_id, + SAS_ADDR(child->sas_addr), + child_phy->phy_id); + } + + return res; +} + +/* Here we spill over 80 columns. It is intentional. + */ +static int sas_check_parent_topology(struct domain_device *child) +{ + struct expander_device *child_ex = &child->ex_dev; + struct expander_device *parent_ex; + int i; + int res = 0; + + if (!child->parent) + return 0; + + if (child->parent->dev_type != EDGE_DEV && + child->parent->dev_type != FANOUT_DEV) + return 0; + + parent_ex = &child->parent->ex_dev; + + for (i = 0; i < parent_ex->num_phys; i++) { + struct ex_phy *parent_phy = &parent_ex->ex_phy[i]; + struct ex_phy *child_phy; + + if (parent_phy->phy_state == PHY_VACANT || + parent_phy->phy_state == PHY_NOT_PRESENT) + continue; + + if (SAS_ADDR(parent_phy->attached_sas_addr) != SAS_ADDR(child->sas_addr)) + continue; + + child_phy = &child_ex->ex_phy[parent_phy->attached_phy_id]; + + switch (child->parent->dev_type) { + case EDGE_DEV: + if (child->dev_type == FANOUT_DEV) { + if (parent_phy->routing_attr != SUBTRACTIVE_ROUTING || + child_phy->routing_attr != TABLE_ROUTING) { + sas_print_parent_topology_bug(child, parent_phy, child_phy); + res = -ENODEV; + } + } else if (parent_phy->routing_attr == SUBTRACTIVE_ROUTING) { + if (child_phy->routing_attr == SUBTRACTIVE_ROUTING) { + res = sas_check_eeds(child, parent_phy, child_phy); + } else if (child_phy->routing_attr != TABLE_ROUTING) { + sas_print_parent_topology_bug(child, parent_phy, child_phy); + res = -ENODEV; + } + } else if (parent_phy->routing_attr == TABLE_ROUTING && + child_phy->routing_attr != SUBTRACTIVE_ROUTING) { + sas_print_parent_topology_bug(child, parent_phy, child_phy); + res = -ENODEV; + } + break; + case FANOUT_DEV: + if (parent_phy->routing_attr != TABLE_ROUTING || + child_phy->routing_attr != SUBTRACTIVE_ROUTING) { + sas_print_parent_topology_bug(child, parent_phy, child_phy); + res = -ENODEV; + } + break; + default: + break; + } + } + + return res; +} + +#define RRI_REQ_SIZE 16 +#define RRI_RESP_SIZE 44 + +static int sas_configure_present(struct domain_device *dev, int phy_id, + u8 *sas_addr, int *index, int *present) +{ + int i, res = 0; + struct expander_device *ex = &dev->ex_dev; + struct ex_phy *phy = &ex->ex_phy[phy_id]; + u8 *rri_req; + u8 *rri_resp; + + *present = 0; + *index = 0; + + rri_req = alloc_smp_req(RRI_REQ_SIZE); + if (!rri_req) + return -ENOMEM; + + rri_resp = alloc_smp_resp(RRI_RESP_SIZE); + if (!rri_resp) { + kfree(rri_req); + return -ENOMEM; + } + + rri_req[1] = SMP_REPORT_ROUTE_INFO; + rri_req[9] = phy_id; + + for (i = 0; i < ex->max_route_indexes ; i++) { + *(__be16 *)(rri_req+6) = cpu_to_be16(i); + res = smp_execute_task(dev, rri_req, RRI_REQ_SIZE, rri_resp, + RRI_RESP_SIZE); + if (res) + goto out; + res = rri_resp[2]; + if (res == SMP_RESP_NO_INDEX) { + SAS_DPRINTK("overflow of indexes: dev %016llx " + "phy 0x%x index 0x%x\n", + SAS_ADDR(dev->sas_addr), phy_id, i); + goto out; + } else if (res != SMP_RESP_FUNC_ACC) { + SAS_DPRINTK("%s: dev %016llx phy 0x%x index 0x%x " + "result 0x%x\n", __FUNCTION__, + SAS_ADDR(dev->sas_addr), phy_id, i, res); + goto out; + } + if (SAS_ADDR(sas_addr) != 0) { + if (SAS_ADDR(rri_resp+16) == SAS_ADDR(sas_addr)) { + *index = i; + if ((rri_resp[12] & 0x80) == 0x80) + *present = 0; + else + *present = 1; + goto out; + } else if (SAS_ADDR(rri_resp+16) == 0) { + *index = i; + *present = 0; + goto out; + } + } else if (SAS_ADDR(rri_resp+16) == 0 && + phy->last_da_index < i) { + phy->last_da_index = i; + *index = i; + *present = 0; + goto out; + } + } + res = -1; +out: + kfree(rri_req); + kfree(rri_resp); + return res; +} + +#define CRI_REQ_SIZE 44 +#define CRI_RESP_SIZE 8 + +static int sas_configure_set(struct domain_device *dev, int phy_id, + u8 *sas_addr, int index, int include) +{ + int res; + u8 *cri_req; + u8 *cri_resp; + + cri_req = alloc_smp_req(CRI_REQ_SIZE); + if (!cri_req) + return -ENOMEM; + + cri_resp = alloc_smp_resp(CRI_RESP_SIZE); + if (!cri_resp) { + kfree(cri_req); + return -ENOMEM; + } + + cri_req[1] = SMP_CONF_ROUTE_INFO; + *(__be16 *)(cri_req+6) = cpu_to_be16(index); + cri_req[9] = phy_id; + if (SAS_ADDR(sas_addr) == 0 || !include) + cri_req[12] |= 0x80; + memcpy(cri_req+16, sas_addr, SAS_ADDR_SIZE); + + res = smp_execute_task(dev, cri_req, CRI_REQ_SIZE, cri_resp, + CRI_RESP_SIZE); + if (res) + goto out; + res = cri_resp[2]; + if (res == SMP_RESP_NO_INDEX) { + SAS_DPRINTK("overflow of indexes: dev %016llx phy 0x%x " + "index 0x%x\n", + SAS_ADDR(dev->sas_addr), phy_id, index); + } +out: + kfree(cri_req); + kfree(cri_resp); + return res; +} + +static int sas_configure_phy(struct domain_device *dev, int phy_id, + u8 *sas_addr, int include) +{ + int index; + int present; + int res; + + res = sas_configure_present(dev, phy_id, sas_addr, &index, &present); + if (res) + return res; + if (include ^ present) + return sas_configure_set(dev, phy_id, sas_addr, index,include); + + return res; +} + +/** + * sas_configure_parent -- configure routing table of parent + * parent: parent expander + * child: child expander + * sas_addr: SAS port identifier of device directly attached to child + */ +static int sas_configure_parent(struct domain_device *parent, + struct domain_device *child, + u8 *sas_addr, int include) +{ + struct expander_device *ex_parent = &parent->ex_dev; + int res = 0; + int i; + + if (parent->parent) { + res = sas_configure_parent(parent->parent, parent, sas_addr, + include); + if (res) + return res; + } + + if (ex_parent->conf_route_table == 0) { + SAS_DPRINTK("ex %016llx has self-configuring routing table\n", + SAS_ADDR(parent->sas_addr)); + return 0; + } + + for (i = 0; i < ex_parent->num_phys; i++) { + struct ex_phy *phy = &ex_parent->ex_phy[i]; + + if ((phy->routing_attr == TABLE_ROUTING) && + (SAS_ADDR(phy->attached_sas_addr) == + SAS_ADDR(child->sas_addr))) { + res = sas_configure_phy(parent, i, sas_addr, include); + if (res) + return res; + } + } + + return res; +} + +/** + * sas_configure_routing -- configure routing + * dev: expander device + * sas_addr: port identifier of device directly attached to the expander device + */ +static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr) +{ + if (dev->parent) + return sas_configure_parent(dev->parent, dev, sas_addr, 1); + return 0; +} + +static int sas_disable_routing(struct domain_device *dev, u8 *sas_addr) +{ + if (dev->parent) + return sas_configure_parent(dev->parent, dev, sas_addr, 0); + return 0; +} + +#if 0 +#define SMP_BIN_ATTR_NAME "smp_portal" + +static void sas_ex_smp_hook(struct domain_device *dev) +{ + struct expander_device *ex_dev = &dev->ex_dev; + struct bin_attribute *bin_attr = &ex_dev->smp_bin_attr; + + memset(bin_attr, 0, sizeof(*bin_attr)); + + bin_attr->attr.name = SMP_BIN_ATTR_NAME; + bin_attr->attr.owner = THIS_MODULE; + bin_attr->attr.mode = 0600; + + bin_attr->size = 0; + bin_attr->private = NULL; + bin_attr->read = smp_portal_read; + bin_attr->write= smp_portal_write; + bin_attr->mmap = NULL; + + ex_dev->smp_portal_pid = -1; + init_MUTEX(&ex_dev->smp_sema); +} +#endif + +/** + * sas_discover_expander -- expander discovery + * @ex: pointer to expander domain device + * + * See comment in sas_discover_sata(). + */ +static int sas_discover_expander(struct domain_device *dev) +{ + int res; + + res = sas_notify_lldd_dev_found(dev); + if (res) + return res; + + res = sas_ex_general(dev); + if (res) + goto out_err; + res = sas_ex_manuf_info(dev); + if (res) + goto out_err; + + res = sas_expander_discover(dev); + if (res) { + SAS_DPRINTK("expander %016llx discovery failed(0x%x)\n", + SAS_ADDR(dev->sas_addr), res); + goto out_err; + } + + sas_check_ex_subtractive_boundary(dev); + res = sas_check_parent_topology(dev); + if (res) + goto out_err; + return 0; +out_err: + sas_notify_lldd_dev_gone(dev); + return res; +} + +static int sas_ex_level_discovery(struct asd_sas_port *port, const int level) +{ + int res = 0; + struct domain_device *dev; + + list_for_each_entry(dev, &port->dev_list, dev_list_node) { + if (dev->dev_type == EDGE_DEV || + dev->dev_type == FANOUT_DEV) { + struct sas_expander_device *ex = + rphy_to_expander_device(dev->rphy); + + if (level == ex->level) + res = sas_ex_discover_devices(dev, -1); + else if (level > 0) + res = sas_ex_discover_devices(port->port_dev, -1); + + } + } + + return res; +} + +static int sas_ex_bfs_disc(struct asd_sas_port *port) +{ + int res; + int level; + + do { + level = port->disc.max_level; + res = sas_ex_level_discovery(port, level); + mb(); + } while (level < port->disc.max_level); + + return res; +} + +int sas_discover_root_expander(struct domain_device *dev) +{ + int res; + struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy); + + sas_rphy_add(dev->rphy); + + ex->level = dev->port->disc.max_level; /* 0 */ + res = sas_discover_expander(dev); + if (!res) + sas_ex_bfs_disc(dev->port); + + return res; +} + +/* ---------- Domain revalidation ---------- */ + +static int sas_get_phy_discover(struct domain_device *dev, + int phy_id, struct smp_resp *disc_resp) +{ + int res; + u8 *disc_req; + + disc_req = alloc_smp_req(DISCOVER_REQ_SIZE); + if (!disc_req) + return -ENOMEM; + + disc_req[1] = SMP_DISCOVER; + disc_req[9] = phy_id; + + res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE, + disc_resp, DISCOVER_RESP_SIZE); + if (res) + goto out; + else if (disc_resp->result != SMP_RESP_FUNC_ACC) { + res = disc_resp->result; + goto out; + } +out: + kfree(disc_req); + return res; +} + +static int sas_get_phy_change_count(struct domain_device *dev, + int phy_id, int *pcc) +{ + int res; + struct smp_resp *disc_resp; + + disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE); + if (!disc_resp) + return -ENOMEM; + + res = sas_get_phy_discover(dev, phy_id, disc_resp); + if (!res) + *pcc = disc_resp->disc.change_count; + + kfree(disc_resp); + return res; +} + +static int sas_get_phy_attached_sas_addr(struct domain_device *dev, + int phy_id, u8 *attached_sas_addr) +{ + int res; + struct smp_resp *disc_resp; + struct discover_resp *dr; + + disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE); + if (!disc_resp) + return -ENOMEM; + dr = &disc_resp->disc; + + res = sas_get_phy_discover(dev, phy_id, disc_resp); + if (!res) { + memcpy(attached_sas_addr,disc_resp->disc.attached_sas_addr,8); + if (dr->attached_dev_type == 0) + memset(attached_sas_addr, 0, 8); + } + kfree(disc_resp); + return res; +} + +static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id, + int from_phy) +{ + struct expander_device *ex = &dev->ex_dev; + int res = 0; + int i; + + for (i = from_phy; i < ex->num_phys; i++) { + int phy_change_count = 0; + + res = sas_get_phy_change_count(dev, i, &phy_change_count); + if (res) + goto out; + else if (phy_change_count != ex->ex_phy[i].phy_change_count) { + ex->ex_phy[i].phy_change_count = phy_change_count; + *phy_id = i; + return 0; + } + } +out: + return res; +} + +static int sas_get_ex_change_count(struct domain_device *dev, int *ecc) +{ + int res; + u8 *rg_req; + struct smp_resp *rg_resp; + + rg_req = alloc_smp_req(RG_REQ_SIZE); + if (!rg_req) + return -ENOMEM; + + rg_resp = alloc_smp_resp(RG_RESP_SIZE); + if (!rg_resp) { + kfree(rg_req); + return -ENOMEM; + } + + rg_req[1] = SMP_REPORT_GENERAL; + + res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp, + RG_RESP_SIZE); + if (res) + goto out; + if (rg_resp->result != SMP_RESP_FUNC_ACC) { + res = rg_resp->result; + goto out; + } + + *ecc = be16_to_cpu(rg_resp->rg.change_count); +out: + kfree(rg_resp); + kfree(rg_req); + return res; +} + +static int sas_find_bcast_dev(struct domain_device *dev, + struct domain_device **src_dev) +{ + struct expander_device *ex = &dev->ex_dev; + int ex_change_count = -1; + int res; + + res = sas_get_ex_change_count(dev, &ex_change_count); + if (res) + goto out; + if (ex_change_count != -1 && + ex_change_count != ex->ex_change_count) { + *src_dev = dev; + ex->ex_change_count = ex_change_count; + } else { + struct domain_device *ch; + + list_for_each_entry(ch, &ex->children, siblings) { + if (ch->dev_type == EDGE_DEV || + ch->dev_type == FANOUT_DEV) { + res = sas_find_bcast_dev(ch, src_dev); + if (src_dev) + return res; + } + } + } +out: + return res; +} + +static void sas_unregister_ex_tree(struct domain_device *dev) +{ + struct expander_device *ex = &dev->ex_dev; + struct domain_device *child, *n; + + list_for_each_entry_safe(child, n, &ex->children, siblings) { + if (child->dev_type == EDGE_DEV || + child->dev_type == FANOUT_DEV) + sas_unregister_ex_tree(child); + else + sas_unregister_dev(child); + } + sas_unregister_dev(dev); +} + +static void sas_unregister_devs_sas_addr(struct domain_device *parent, + int phy_id) +{ + struct expander_device *ex_dev = &parent->ex_dev; + struct ex_phy *phy = &ex_dev->ex_phy[phy_id]; + struct domain_device *child, *n; + + list_for_each_entry_safe(child, n, &ex_dev->children, siblings) { + if (SAS_ADDR(child->sas_addr) == + SAS_ADDR(phy->attached_sas_addr)) { + if (child->dev_type == EDGE_DEV || + child->dev_type == FANOUT_DEV) + sas_unregister_ex_tree(child); + else + sas_unregister_dev(child); + break; + } + } + sas_disable_routing(parent, phy->attached_sas_addr); + memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE); + sas_port_delete_phy(phy->port, phy->phy); + if (phy->port->num_phys == 0) + sas_port_delete(phy->port); + phy->port = NULL; +} + +static int sas_discover_bfs_by_root_level(struct domain_device *root, + const int level) +{ + struct expander_device *ex_root = &root->ex_dev; + struct domain_device *child; + int res = 0; + + list_for_each_entry(child, &ex_root->children, siblings) { + if (child->dev_type == EDGE_DEV || + child->dev_type == FANOUT_DEV) { + struct sas_expander_device *ex = + rphy_to_expander_device(child->rphy); + + if (level > ex->level) + res = sas_discover_bfs_by_root_level(child, + level); + else if (level == ex->level) + res = sas_ex_discover_devices(child, -1); + } + } + return res; +} + +static int sas_discover_bfs_by_root(struct domain_device *dev) +{ + int res; + struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy); + int level = ex->level+1; + + res = sas_ex_discover_devices(dev, -1); + if (res) + goto out; + do { + res = sas_discover_bfs_by_root_level(dev, level); + mb(); + level += 1; + } while (level <= dev->port->disc.max_level); +out: + return res; +} + +static int sas_discover_new(struct domain_device *dev, int phy_id) +{ + struct ex_phy *ex_phy = &dev->ex_dev.ex_phy[phy_id]; + struct domain_device *child; + int res; + + SAS_DPRINTK("ex %016llx phy%d new device attached\n", + SAS_ADDR(dev->sas_addr), phy_id); + res = sas_ex_phy_discover(dev, phy_id); + if (res) + goto out; + res = sas_ex_discover_devices(dev, phy_id); + if (res) + goto out; + list_for_each_entry(child, &dev->ex_dev.children, siblings) { + if (SAS_ADDR(child->sas_addr) == + SAS_ADDR(ex_phy->attached_sas_addr)) { + if (child->dev_type == EDGE_DEV || + child->dev_type == FANOUT_DEV) + res = sas_discover_bfs_by_root(child); + break; + } + } +out: + return res; +} + +static int sas_rediscover_dev(struct domain_device *dev, int phy_id) +{ + struct expander_device *ex = &dev->ex_dev; + struct ex_phy *phy = &ex->ex_phy[phy_id]; + u8 attached_sas_addr[8]; + int res; + + res = sas_get_phy_attached_sas_addr(dev, phy_id, attached_sas_addr); + switch (res) { + case SMP_RESP_NO_PHY: + phy->phy_state = PHY_NOT_PRESENT; + sas_unregister_devs_sas_addr(dev, phy_id); + goto out; break; + case SMP_RESP_PHY_VACANT: + phy->phy_state = PHY_VACANT; + sas_unregister_devs_sas_addr(dev, phy_id); + goto out; break; + case SMP_RESP_FUNC_ACC: + break; + } + + if (SAS_ADDR(attached_sas_addr) == 0) { + phy->phy_state = PHY_EMPTY; + sas_unregister_devs_sas_addr(dev, phy_id); + } else if (SAS_ADDR(attached_sas_addr) == + SAS_ADDR(phy->attached_sas_addr)) { + SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter\n", + SAS_ADDR(dev->sas_addr), phy_id); + sas_ex_phy_discover(dev, phy_id); + } else + res = sas_discover_new(dev, phy_id); +out: + return res; +} + +static int sas_rediscover(struct domain_device *dev, const int phy_id) +{ + struct expander_device *ex = &dev->ex_dev; + struct ex_phy *changed_phy = &ex->ex_phy[phy_id]; + int res = 0; + int i; + + SAS_DPRINTK("ex %016llx phy%d originated BROADCAST(CHANGE)\n", + SAS_ADDR(dev->sas_addr), phy_id); + + if (SAS_ADDR(changed_phy->attached_sas_addr) != 0) { + for (i = 0; i < ex->num_phys; i++) { + struct ex_phy *phy = &ex->ex_phy[i]; + + if (i == phy_id) + continue; + if (SAS_ADDR(phy->attached_sas_addr) == + SAS_ADDR(changed_phy->attached_sas_addr)) { + SAS_DPRINTK("phy%d part of wide port with " + "phy%d\n", phy_id, i); + goto out; + } + } + res = sas_rediscover_dev(dev, phy_id); + } else + res = sas_discover_new(dev, phy_id); +out: + return res; +} + +/** + * sas_revalidate_domain -- revalidate the domain + * @port: port to the domain of interest + * + * NOTE: this process _must_ quit (return) as soon as any connection + * errors are encountered. Connection recovery is done elsewhere. + * Discover process only interrogates devices in order to discover the + * domain. + */ +int sas_ex_revalidate_domain(struct domain_device *port_dev) +{ + int res; + struct domain_device *dev = NULL; + + res = sas_find_bcast_dev(port_dev, &dev); + if (res) + goto out; + if (dev) { + struct expander_device *ex = &dev->ex_dev; + int i = 0, phy_id; + + do { + phy_id = -1; + res = sas_find_bcast_phy(dev, &phy_id, i); + if (phy_id == -1) + break; + res = sas_rediscover(dev, phy_id); + i = phy_id + 1; + } while (i < ex->num_phys); + } +out: + return res; +} + +#if 0 +/* ---------- SMP portal ---------- */ + +static ssize_t smp_portal_write(struct kobject *kobj, char *buf, loff_t offs, + size_t size) +{ + struct domain_device *dev = to_dom_device(kobj); + struct expander_device *ex = &dev->ex_dev; + + if (offs != 0) + return -EFBIG; + else if (size == 0) + return 0; + + down_interruptible(&ex->smp_sema); + if (ex->smp_req) + kfree(ex->smp_req); + ex->smp_req = kzalloc(size, GFP_USER); + if (!ex->smp_req) { + up(&ex->smp_sema); + return -ENOMEM; + } + memcpy(ex->smp_req, buf, size); + ex->smp_req_size = size; + ex->smp_portal_pid = current->pid; + up(&ex->smp_sema); + + return size; +} + +static ssize_t smp_portal_read(struct kobject *kobj, char *buf, loff_t offs, + size_t size) +{ + struct domain_device *dev = to_dom_device(kobj); + struct expander_device *ex = &dev->ex_dev; + u8 *smp_resp; + int res = -EINVAL; + + /* XXX: sysfs gives us an offset of 0x10 or 0x8 while in fact + * it should be 0. + */ + + down_interruptible(&ex->smp_sema); + if (!ex->smp_req || ex->smp_portal_pid != current->pid) + goto out; + + res = 0; + if (size == 0) + goto out; + + res = -ENOMEM; + smp_resp = alloc_smp_resp(size); + if (!smp_resp) + goto out; + res = smp_execute_task(dev, ex->smp_req, ex->smp_req_size, + smp_resp, size); + if (!res) { + memcpy(buf, smp_resp, size); + res = size; + } + + kfree(smp_resp); +out: + kfree(ex->smp_req); + ex->smp_req = NULL; + ex->smp_req_size = 0; + ex->smp_portal_pid = -1; + up(&ex->smp_sema); + return res; +} +#endif diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c new file mode 100644 index 00000000000..c836a237fb7 --- /dev/null +++ b/drivers/scsi/libsas/sas_init.c @@ -0,0 +1,267 @@ +/* + * Serial Attached SCSI (SAS) Transport Layer initialization + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/spinlock.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_transport.h> +#include <scsi/scsi_transport_sas.h> + +#include "sas_internal.h" + +#include "../scsi_sas_internal.h" + +kmem_cache_t *sas_task_cache; + +/*------------ SAS addr hash -----------*/ +void sas_hash_addr(u8 *hashed, const u8 *sas_addr) +{ + const u32 poly = 0x00DB2777; + u32 r = 0; + int i; + + for (i = 0; i < 8; i++) { + int b; + for (b = 7; b >= 0; b--) { + r <<= 1; + if ((1 << b) & sas_addr[i]) { + if (!(r & 0x01000000)) + r ^= poly; + } else if (r & 0x01000000) + r ^= poly; + } + } + + hashed[0] = (r >> 16) & 0xFF; + hashed[1] = (r >> 8) & 0xFF ; + hashed[2] = r & 0xFF; +} + + +/* ---------- HA events ---------- */ + +void sas_hae_reset(void *data) +{ + struct sas_ha_struct *ha = data; + + sas_begin_event(HAE_RESET, &ha->event_lock, + &ha->pending); +} + +int sas_register_ha(struct sas_ha_struct *sas_ha) +{ + int error = 0; + + spin_lock_init(&sas_ha->phy_port_lock); + sas_hash_addr(sas_ha->hashed_sas_addr, sas_ha->sas_addr); + + if (sas_ha->lldd_queue_size == 0) + sas_ha->lldd_queue_size = 1; + else if (sas_ha->lldd_queue_size == -1) + sas_ha->lldd_queue_size = 128; /* Sanity */ + + error = sas_register_phys(sas_ha); + if (error) { + printk(KERN_NOTICE "couldn't register sas phys:%d\n", error); + return error; + } + + error = sas_register_ports(sas_ha); + if (error) { + printk(KERN_NOTICE "couldn't register sas ports:%d\n", error); + goto Undo_phys; + } + + error = sas_init_events(sas_ha); + if (error) { + printk(KERN_NOTICE "couldn't start event thread:%d\n", error); + goto Undo_ports; + } + + if (sas_ha->lldd_max_execute_num > 1) { + error = sas_init_queue(sas_ha); + if (error) { + printk(KERN_NOTICE "couldn't start queue thread:%d, " + "running in direct mode\n", error); + sas_ha->lldd_max_execute_num = 1; + } + } + + return 0; + +Undo_ports: + sas_unregister_ports(sas_ha); +Undo_phys: + + return error; +} + +int sas_unregister_ha(struct sas_ha_struct *sas_ha) +{ + if (sas_ha->lldd_max_execute_num > 1) { + sas_shutdown_queue(sas_ha); + } + + sas_unregister_ports(sas_ha); + + return 0; +} + +static int sas_get_linkerrors(struct sas_phy *phy) +{ + if (scsi_is_sas_phy_local(phy)) + /* FIXME: we have no local phy stats + * gathering at this time */ + return -EINVAL; + + return sas_smp_get_phy_events(phy); +} + +static int sas_phy_reset(struct sas_phy *phy, int hard_reset) +{ + int ret; + enum phy_func reset_type; + + if (hard_reset) + reset_type = PHY_FUNC_HARD_RESET; + else + reset_type = PHY_FUNC_LINK_RESET; + + if (scsi_is_sas_phy_local(phy)) { + struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); + struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); + struct asd_sas_phy *asd_phy = sas_ha->sas_phy[phy->number]; + struct sas_internal *i = + to_sas_internal(sas_ha->core.shost->transportt); + + ret = i->dft->lldd_control_phy(asd_phy, reset_type, NULL); + } else { + struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent); + struct domain_device *ddev = sas_find_dev_by_rphy(rphy); + ret = sas_smp_phy_control(ddev, phy->number, reset_type, NULL); + } + return ret; +} + +static int sas_set_phy_speed(struct sas_phy *phy, + struct sas_phy_linkrates *rates) +{ + int ret; + + if ((rates->minimum_linkrate && + rates->minimum_linkrate > phy->maximum_linkrate) || + (rates->maximum_linkrate && + rates->maximum_linkrate < phy->minimum_linkrate)) + return -EINVAL; + + if (rates->minimum_linkrate && + rates->minimum_linkrate < phy->minimum_linkrate_hw) + rates->minimum_linkrate = phy->minimum_linkrate_hw; + + if (rates->maximum_linkrate && + rates->maximum_linkrate > phy->maximum_linkrate_hw) + rates->maximum_linkrate = phy->maximum_linkrate_hw; + + if (scsi_is_sas_phy_local(phy)) { + struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); + struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); + struct asd_sas_phy *asd_phy = sas_ha->sas_phy[phy->number]; + struct sas_internal *i = + to_sas_internal(sas_ha->core.shost->transportt); + + ret = i->dft->lldd_control_phy(asd_phy, PHY_FUNC_SET_LINK_RATE, + rates); + } else { + struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent); + struct domain_device *ddev = sas_find_dev_by_rphy(rphy); + ret = sas_smp_phy_control(ddev, phy->number, + PHY_FUNC_LINK_RESET, rates); + + } + + return ret; +} + +static struct sas_function_template sft = { + .phy_reset = sas_phy_reset, + .set_phy_speed = sas_set_phy_speed, + .get_linkerrors = sas_get_linkerrors, +}; + +struct scsi_transport_template * +sas_domain_attach_transport(struct sas_domain_function_template *dft) +{ + struct scsi_transport_template *stt = sas_attach_transport(&sft); + struct sas_internal *i; + + if (!stt) + return stt; + + i = to_sas_internal(stt); + i->dft = dft; + stt->create_work_queue = 1; + stt->eh_timed_out = sas_scsi_timed_out; + stt->eh_strategy_handler = sas_scsi_recover_host; + + return stt; +} +EXPORT_SYMBOL_GPL(sas_domain_attach_transport); + + +void sas_domain_release_transport(struct scsi_transport_template *stt) +{ + sas_release_transport(stt); +} +EXPORT_SYMBOL_GPL(sas_domain_release_transport); + +/* ---------- SAS Class register/unregister ---------- */ + +static int __init sas_class_init(void) +{ + sas_task_cache = kmem_cache_create("sas_task", sizeof(struct sas_task), + 0, SLAB_HWCACHE_ALIGN, NULL, NULL); + if (!sas_task_cache) + return -ENOMEM; + + return 0; +} + +static void __exit sas_class_exit(void) +{ + kmem_cache_destroy(sas_task_cache); +} + +MODULE_AUTHOR("Luben Tuikov <luben_tuikov@adaptec.com>"); +MODULE_DESCRIPTION("SAS Transport Layer"); +MODULE_LICENSE("GPL v2"); + +module_init(sas_class_init); +module_exit(sas_class_exit); + +EXPORT_SYMBOL_GPL(sas_register_ha); +EXPORT_SYMBOL_GPL(sas_unregister_ha); diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h new file mode 100644 index 00000000000..bffcee47492 --- /dev/null +++ b/drivers/scsi/libsas/sas_internal.h @@ -0,0 +1,146 @@ +/* + * Serial Attached SCSI (SAS) class internal header file + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + * + */ + +#ifndef _SAS_INTERNAL_H_ +#define _SAS_INTERNAL_H_ + +#include <scsi/scsi.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_transport_sas.h> +#include <scsi/libsas.h> + +#define sas_printk(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__) + +#ifdef SAS_DEBUG +#define SAS_DPRINTK(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__) +#else +#define SAS_DPRINTK(fmt, ...) +#endif + +void sas_scsi_recover_host(struct Scsi_Host *shost); + +int sas_show_class(enum sas_class class, char *buf); +int sas_show_proto(enum sas_proto proto, char *buf); +int sas_show_linkrate(enum sas_linkrate linkrate, char *buf); +int sas_show_oob_mode(enum sas_oob_mode oob_mode, char *buf); + +int sas_register_phys(struct sas_ha_struct *sas_ha); +void sas_unregister_phys(struct sas_ha_struct *sas_ha); + +int sas_register_ports(struct sas_ha_struct *sas_ha); +void sas_unregister_ports(struct sas_ha_struct *sas_ha); + +enum scsi_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *); + +int sas_init_queue(struct sas_ha_struct *sas_ha); +int sas_init_events(struct sas_ha_struct *sas_ha); +void sas_shutdown_queue(struct sas_ha_struct *sas_ha); + +void sas_deform_port(struct asd_sas_phy *phy); + +void sas_porte_bytes_dmaed(void *); +void sas_porte_broadcast_rcvd(void *); +void sas_porte_link_reset_err(void *); +void sas_porte_timer_event(void *); +void sas_porte_hard_reset(void *); + +int sas_notify_lldd_dev_found(struct domain_device *); +void sas_notify_lldd_dev_gone(struct domain_device *); + +int sas_smp_phy_control(struct domain_device *dev, int phy_id, + enum phy_func phy_func, struct sas_phy_linkrates *); +int sas_smp_get_phy_events(struct sas_phy *phy); + +struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy); + +void sas_hae_reset(void *); + +static inline void sas_queue_event(int event, spinlock_t *lock, + unsigned long *pending, + struct work_struct *work, + struct Scsi_Host *shost) +{ + unsigned long flags; + + spin_lock_irqsave(lock, flags); + if (test_bit(event, pending)) { + spin_unlock_irqrestore(lock, flags); + return; + } + __set_bit(event, pending); + spin_unlock_irqrestore(lock, flags); + scsi_queue_work(shost, work); +} + +static inline void sas_begin_event(int event, spinlock_t *lock, + unsigned long *pending) +{ + unsigned long flags; + + spin_lock_irqsave(lock, flags); + __clear_bit(event, pending); + spin_unlock_irqrestore(lock, flags); +} + +static inline void sas_fill_in_rphy(struct domain_device *dev, + struct sas_rphy *rphy) +{ + rphy->identify.sas_address = SAS_ADDR(dev->sas_addr); + rphy->identify.initiator_port_protocols = dev->iproto; + rphy->identify.target_port_protocols = dev->tproto; + switch (dev->dev_type) { + case SATA_DEV: + /* FIXME: need sata device type */ + case SAS_END_DEV: + rphy->identify.device_type = SAS_END_DEVICE; + break; + case EDGE_DEV: + rphy->identify.device_type = SAS_EDGE_EXPANDER_DEVICE; + break; + case FANOUT_DEV: + rphy->identify.device_type = SAS_FANOUT_EXPANDER_DEVICE; + break; + default: + rphy->identify.device_type = SAS_PHY_UNUSED; + break; + } +} + +static inline void sas_add_parent_port(struct domain_device *dev, int phy_id) +{ + struct expander_device *ex = &dev->ex_dev; + struct ex_phy *ex_phy = &ex->ex_phy[phy_id]; + + if (!ex->parent_port) { + ex->parent_port = sas_port_alloc(&dev->rphy->dev, phy_id); + /* FIXME: error handling */ + BUG_ON(!ex->parent_port); + BUG_ON(sas_port_add(ex->parent_port)); + sas_port_mark_backlink(ex->parent_port); + } + sas_port_add_phy(ex->parent_port, ex_phy->phy); +} + +#endif /* _SAS_INTERNAL_H_ */ diff --git a/drivers/scsi/libsas/sas_phy.c b/drivers/scsi/libsas/sas_phy.c new file mode 100644 index 00000000000..9340cdbae4a --- /dev/null +++ b/drivers/scsi/libsas/sas_phy.c @@ -0,0 +1,158 @@ +/* + * Serial Attached SCSI (SAS) Phy class + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include "sas_internal.h" +#include <scsi/scsi_host.h> +#include <scsi/scsi_transport.h> +#include <scsi/scsi_transport_sas.h> +#include "../scsi_sas_internal.h" + +/* ---------- Phy events ---------- */ + +static void sas_phye_loss_of_signal(void *data) +{ + struct asd_sas_phy *phy = data; + + sas_begin_event(PHYE_LOSS_OF_SIGNAL, &phy->ha->event_lock, + &phy->phy_events_pending); + phy->error = 0; + sas_deform_port(phy); +} + +static void sas_phye_oob_done(void *data) +{ + struct asd_sas_phy *phy = data; + + sas_begin_event(PHYE_OOB_DONE, &phy->ha->event_lock, + &phy->phy_events_pending); + phy->error = 0; +} + +static void sas_phye_oob_error(void *data) +{ + struct asd_sas_phy *phy = data; + struct sas_ha_struct *sas_ha = phy->ha; + struct asd_sas_port *port = phy->port; + struct sas_internal *i = + to_sas_internal(sas_ha->core.shost->transportt); + + sas_begin_event(PHYE_OOB_ERROR, &phy->ha->event_lock, + &phy->phy_events_pending); + + sas_deform_port(phy); + + if (!port && phy->enabled && i->dft->lldd_control_phy) { + phy->error++; + switch (phy->error) { + case 1: + case 2: + i->dft->lldd_control_phy(phy, PHY_FUNC_HARD_RESET, + NULL); + break; + case 3: + default: + phy->error = 0; + phy->enabled = 0; + i->dft->lldd_control_phy(phy, PHY_FUNC_DISABLE, NULL); + break; + } + } +} + +static void sas_phye_spinup_hold(void *data) +{ + struct asd_sas_phy *phy = data; + struct sas_ha_struct *sas_ha = phy->ha; + struct sas_internal *i = + to_sas_internal(sas_ha->core.shost->transportt); + + sas_begin_event(PHYE_SPINUP_HOLD, &phy->ha->event_lock, + &phy->phy_events_pending); + + phy->error = 0; + i->dft->lldd_control_phy(phy, PHY_FUNC_RELEASE_SPINUP_HOLD, NULL); +} + +/* ---------- Phy class registration ---------- */ + +int sas_register_phys(struct sas_ha_struct *sas_ha) +{ + int i; + + static void (*sas_phy_event_fns[PHY_NUM_EVENTS])(void *) = { + [PHYE_LOSS_OF_SIGNAL] = sas_phye_loss_of_signal, + [PHYE_OOB_DONE] = sas_phye_oob_done, + [PHYE_OOB_ERROR] = sas_phye_oob_error, + [PHYE_SPINUP_HOLD] = sas_phye_spinup_hold, + }; + + static void (*sas_port_event_fns[PORT_NUM_EVENTS])(void *) = { + [PORTE_BYTES_DMAED] = sas_porte_bytes_dmaed, + [PORTE_BROADCAST_RCVD] = sas_porte_broadcast_rcvd, + [PORTE_LINK_RESET_ERR] = sas_porte_link_reset_err, + [PORTE_TIMER_EVENT] = sas_porte_timer_event, + [PORTE_HARD_RESET] = sas_porte_hard_reset, + }; + + /* Now register the phys. */ + for (i = 0; i < sas_ha->num_phys; i++) { + int k; + struct asd_sas_phy *phy = sas_ha->sas_phy[i]; + + phy->error = 0; + INIT_LIST_HEAD(&phy->port_phy_el); + for (k = 0; k < PORT_NUM_EVENTS; k++) + INIT_WORK(&phy->port_events[k], sas_port_event_fns[k], + phy); + + for (k = 0; k < PHY_NUM_EVENTS; k++) + INIT_WORK(&phy->phy_events[k], sas_phy_event_fns[k], + phy); + phy->port = NULL; + phy->ha = sas_ha; + spin_lock_init(&phy->frame_rcvd_lock); + spin_lock_init(&phy->sas_prim_lock); + phy->frame_rcvd_size = 0; + + phy->phy = sas_phy_alloc(&sas_ha->core.shost->shost_gendev, + i); + if (!phy->phy) + return -ENOMEM; + + phy->phy->identify.initiator_port_protocols = + phy->iproto; + phy->phy->identify.target_port_protocols = phy->tproto; + phy->phy->identify.sas_address = SAS_ADDR(sas_ha->sas_addr); + phy->phy->identify.phy_identifier = i; + phy->phy->minimum_linkrate_hw = SAS_LINK_RATE_UNKNOWN; + phy->phy->maximum_linkrate_hw = SAS_LINK_RATE_UNKNOWN; + phy->phy->minimum_linkrate = SAS_LINK_RATE_UNKNOWN; + phy->phy->maximum_linkrate = SAS_LINK_RATE_UNKNOWN; + phy->phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN; + + sas_phy_add(phy->phy); + } + + return 0; +} diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c new file mode 100644 index 00000000000..253cdcf306a --- /dev/null +++ b/drivers/scsi/libsas/sas_port.c @@ -0,0 +1,279 @@ +/* + * Serial Attached SCSI (SAS) Port class + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include "sas_internal.h" + +#include <scsi/scsi_transport.h> +#include <scsi/scsi_transport_sas.h> +#include "../scsi_sas_internal.h" + +/** + * sas_form_port -- add this phy to a port + * @phy: the phy of interest + * + * This function adds this phy to an existing port, thus creating a wide + * port, or it creates a port and adds the phy to the port. + */ +static void sas_form_port(struct asd_sas_phy *phy) +{ + int i; + struct sas_ha_struct *sas_ha = phy->ha; + struct asd_sas_port *port = phy->port; + struct sas_internal *si = + to_sas_internal(sas_ha->core.shost->transportt); + + if (port) { + if (memcmp(port->attached_sas_addr, phy->attached_sas_addr, + SAS_ADDR_SIZE) == 0) + sas_deform_port(phy); + else { + SAS_DPRINTK("%s: phy%d belongs to port%d already(%d)!\n", + __FUNCTION__, phy->id, phy->port->id, + phy->port->num_phys); + return; + } + } + + /* find a port */ + spin_lock(&sas_ha->phy_port_lock); + for (i = 0; i < sas_ha->num_phys; i++) { + port = sas_ha->sas_port[i]; + spin_lock(&port->phy_list_lock); + if (*(u64 *) port->sas_addr && + memcmp(port->attached_sas_addr, + phy->attached_sas_addr, SAS_ADDR_SIZE) == 0 && + port->num_phys > 0) { + /* wide port */ + SAS_DPRINTK("phy%d matched wide port%d\n", phy->id, + port->id); + break; + } else if (*(u64 *) port->sas_addr == 0 && port->num_phys==0) { + memcpy(port->sas_addr, phy->sas_addr, SAS_ADDR_SIZE); + break; + } + spin_unlock(&port->phy_list_lock); + } + + if (i >= sas_ha->num_phys) { + printk(KERN_NOTICE "%s: couldn't find a free port, bug?\n", + __FUNCTION__); + spin_unlock(&sas_ha->phy_port_lock); + return; + } + + /* add the phy to the port */ + list_add_tail(&phy->port_phy_el, &port->phy_list); + phy->port = port; + port->num_phys++; + port->phy_mask |= (1U << phy->id); + + if (!port->phy) + port->phy = phy->phy; + + SAS_DPRINTK("phy%d added to port%d, phy_mask:0x%x\n", phy->id, + port->id, port->phy_mask); + + if (*(u64 *)port->attached_sas_addr == 0) { + port->class = phy->class; + memcpy(port->attached_sas_addr, phy->attached_sas_addr, + SAS_ADDR_SIZE); + port->iproto = phy->iproto; + port->tproto = phy->tproto; + port->oob_mode = phy->oob_mode; + port->linkrate = phy->linkrate; + } else + port->linkrate = max(port->linkrate, phy->linkrate); + spin_unlock(&port->phy_list_lock); + spin_unlock(&sas_ha->phy_port_lock); + + if (!port->port) { + port->port = sas_port_alloc(phy->phy->dev.parent, port->id); + BUG_ON(!port->port); + sas_port_add(port->port); + } + sas_port_add_phy(port->port, phy->phy); + + if (port->port_dev) + port->port_dev->pathways = port->num_phys; + + /* Tell the LLDD about this port formation. */ + if (si->dft->lldd_port_formed) + si->dft->lldd_port_formed(phy); + + sas_discover_event(phy->port, DISCE_DISCOVER_DOMAIN); +} + +/** + * sas_deform_port -- remove this phy from the port it belongs to + * @phy: the phy of interest + * + * This is called when the physical link to the other phy has been + * lost (on this phy), in Event thread context. We cannot delay here. + */ +void sas_deform_port(struct asd_sas_phy *phy) +{ + struct sas_ha_struct *sas_ha = phy->ha; + struct asd_sas_port *port = phy->port; + struct sas_internal *si = + to_sas_internal(sas_ha->core.shost->transportt); + + if (!port) + return; /* done by a phy event */ + + if (port->port_dev) + port->port_dev->pathways--; + + if (port->num_phys == 1) { + sas_unregister_domain_devices(port); + sas_port_delete(port->port); + port->port = NULL; + } else + sas_port_delete_phy(port->port, phy->phy); + + + if (si->dft->lldd_port_deformed) + si->dft->lldd_port_deformed(phy); + + spin_lock(&sas_ha->phy_port_lock); + spin_lock(&port->phy_list_lock); + + list_del_init(&phy->port_phy_el); + phy->port = NULL; + port->num_phys--; + port->phy_mask &= ~(1U << phy->id); + + if (port->num_phys == 0) { + INIT_LIST_HEAD(&port->phy_list); + memset(port->sas_addr, 0, SAS_ADDR_SIZE); + memset(port->attached_sas_addr, 0, SAS_ADDR_SIZE); + port->class = 0; + port->iproto = 0; + port->tproto = 0; + port->oob_mode = 0; + port->phy_mask = 0; + } + spin_unlock(&port->phy_list_lock); + spin_unlock(&sas_ha->phy_port_lock); + + return; +} + +/* ---------- SAS port events ---------- */ + +void sas_porte_bytes_dmaed(void *data) +{ + struct asd_sas_phy *phy = data; + + sas_begin_event(PORTE_BYTES_DMAED, &phy->ha->event_lock, + &phy->port_events_pending); + + sas_form_port(phy); +} + +void sas_porte_broadcast_rcvd(void *data) +{ + unsigned long flags; + u32 prim; + struct asd_sas_phy *phy = data; + + sas_begin_event(PORTE_BROADCAST_RCVD, &phy->ha->event_lock, + &phy->port_events_pending); + + spin_lock_irqsave(&phy->sas_prim_lock, flags); + prim = phy->sas_prim; + spin_unlock_irqrestore(&phy->sas_prim_lock, flags); + + SAS_DPRINTK("broadcast received: %d\n", prim); + sas_discover_event(phy->port, DISCE_REVALIDATE_DOMAIN); +} + +void sas_porte_link_reset_err(void *data) +{ + struct asd_sas_phy *phy = data; + + sas_begin_event(PORTE_LINK_RESET_ERR, &phy->ha->event_lock, + &phy->port_events_pending); + + sas_deform_port(phy); +} + +void sas_porte_timer_event(void *data) +{ + struct asd_sas_phy *phy = data; + + sas_begin_event(PORTE_TIMER_EVENT, &phy->ha->event_lock, + &phy->port_events_pending); + + sas_deform_port(phy); +} + +void sas_porte_hard_reset(void *data) +{ + struct asd_sas_phy *phy = data; + + sas_begin_event(PORTE_HARD_RESET, &phy->ha->event_lock, + &phy->port_events_pending); + + sas_deform_port(phy); +} + +/* ---------- SAS port registration ---------- */ + +static void sas_init_port(struct asd_sas_port *port, + struct sas_ha_struct *sas_ha, int i) +{ + port->id = i; + INIT_LIST_HEAD(&port->dev_list); + spin_lock_init(&port->phy_list_lock); + INIT_LIST_HEAD(&port->phy_list); + port->num_phys = 0; + port->phy_mask = 0; + port->ha = sas_ha; + + spin_lock_init(&port->dev_list_lock); +} + +int sas_register_ports(struct sas_ha_struct *sas_ha) +{ + int i; + + /* initialize the ports and discovery */ + for (i = 0; i < sas_ha->num_phys; i++) { + struct asd_sas_port *port = sas_ha->sas_port[i]; + + sas_init_port(port, sas_ha, i); + sas_init_disc(&port->disc, port); + } + return 0; +} + +void sas_unregister_ports(struct sas_ha_struct *sas_ha) +{ + int i; + + for (i = 0; i < sas_ha->num_phys; i++) + if (sas_ha->sas_phy[i]->port) + sas_deform_port(sas_ha->sas_phy[i]); + +} diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c new file mode 100644 index 00000000000..7f9e89bcac7 --- /dev/null +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -0,0 +1,786 @@ +/* + * Serial Attached SCSI (SAS) class SCSI Host glue. + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> + * + * This file is licensed under GPLv2. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + * + */ + +#include "sas_internal.h" + +#include <scsi/scsi_host.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_tcq.h> +#include <scsi/scsi.h> +#include <scsi/scsi_transport.h> +#include <scsi/scsi_transport_sas.h> +#include "../scsi_sas_internal.h" + +#include <linux/err.h> +#include <linux/blkdev.h> +#include <linux/scatterlist.h> + +/* ---------- SCSI Host glue ---------- */ + +#define TO_SAS_TASK(_scsi_cmd) ((void *)(_scsi_cmd)->host_scribble) +#define ASSIGN_SAS_TASK(_sc, _t) do { (_sc)->host_scribble = (void *) _t; } while (0) + +static void sas_scsi_task_done(struct sas_task *task) +{ + struct task_status_struct *ts = &task->task_status; + struct scsi_cmnd *sc = task->uldd_task; + unsigned ts_flags = task->task_state_flags; + int hs = 0, stat = 0; + + if (unlikely(!sc)) { + SAS_DPRINTK("task_done called with non existing SCSI cmnd!\n"); + list_del_init(&task->list); + sas_free_task(task); + return; + } + + if (ts->resp == SAS_TASK_UNDELIVERED) { + /* transport error */ + hs = DID_NO_CONNECT; + } else { /* ts->resp == SAS_TASK_COMPLETE */ + /* task delivered, what happened afterwards? */ + switch (ts->stat) { + case SAS_DEV_NO_RESPONSE: + case SAS_INTERRUPTED: + case SAS_PHY_DOWN: + case SAS_NAK_R_ERR: + case SAS_OPEN_TO: + hs = DID_NO_CONNECT; + break; + case SAS_DATA_UNDERRUN: + sc->resid = ts->residual; + if (sc->request_bufflen - sc->resid < sc->underflow) + hs = DID_ERROR; + break; + case SAS_DATA_OVERRUN: + hs = DID_ERROR; + break; + case SAS_QUEUE_FULL: + hs = DID_SOFT_ERROR; /* retry */ + break; + case SAS_DEVICE_UNKNOWN: + hs = DID_BAD_TARGET; + break; + case SAS_SG_ERR: + hs = DID_PARITY; + break; + case SAS_OPEN_REJECT: + if (ts->open_rej_reason == SAS_OREJ_RSVD_RETRY) + hs = DID_SOFT_ERROR; /* retry */ + else + hs = DID_ERROR; + break; + case SAS_PROTO_RESPONSE: + SAS_DPRINTK("LLDD:%s sent SAS_PROTO_RESP for an SSP " + "task; please report this\n", + task->dev->port->ha->sas_ha_name); + break; + case SAS_ABORTED_TASK: + hs = DID_ABORT; + break; + case SAM_CHECK_COND: + memcpy(sc->sense_buffer, ts->buf, + max(SCSI_SENSE_BUFFERSIZE, ts->buf_valid_size)); + stat = SAM_CHECK_COND; + break; + default: + stat = ts->stat; + break; + } + } + ASSIGN_SAS_TASK(sc, NULL); + sc->result = (hs << 16) | stat; + list_del_init(&task->list); + sas_free_task(task); + /* This is very ugly but this is how SCSI Core works. */ + if (ts_flags & SAS_TASK_STATE_ABORTED) + scsi_finish_command(sc); + else + sc->scsi_done(sc); +} + +static enum task_attribute sas_scsi_get_task_attr(struct scsi_cmnd *cmd) +{ + enum task_attribute ta = TASK_ATTR_SIMPLE; + if (cmd->request && blk_rq_tagged(cmd->request)) { + if (cmd->device->ordered_tags && + (cmd->request->flags & REQ_HARDBARRIER)) + ta = TASK_ATTR_HOQ; + } + return ta; +} + +static struct sas_task *sas_create_task(struct scsi_cmnd *cmd, + struct domain_device *dev, + gfp_t gfp_flags) +{ + struct sas_task *task = sas_alloc_task(gfp_flags); + struct scsi_lun lun; + + if (!task) + return NULL; + + *(u32 *)cmd->sense_buffer = 0; + task->uldd_task = cmd; + ASSIGN_SAS_TASK(cmd, task); + + task->dev = dev; + task->task_proto = task->dev->tproto; /* BUG_ON(!SSP) */ + + task->ssp_task.retry_count = 1; + int_to_scsilun(cmd->device->lun, &lun); + memcpy(task->ssp_task.LUN, &lun.scsi_lun, 8); + task->ssp_task.task_attr = sas_scsi_get_task_attr(cmd); + memcpy(task->ssp_task.cdb, cmd->cmnd, 16); + + task->scatter = cmd->request_buffer; + task->num_scatter = cmd->use_sg; + task->total_xfer_len = cmd->request_bufflen; + task->data_dir = cmd->sc_data_direction; + + task->task_done = sas_scsi_task_done; + + return task; +} + +static int sas_queue_up(struct sas_task *task) +{ + struct sas_ha_struct *sas_ha = task->dev->port->ha; + struct scsi_core *core = &sas_ha->core; + unsigned long flags; + LIST_HEAD(list); + + spin_lock_irqsave(&core->task_queue_lock, flags); + if (sas_ha->lldd_queue_size < core->task_queue_size + 1) { + spin_unlock_irqrestore(&core->task_queue_lock, flags); + return -SAS_QUEUE_FULL; + } + list_add_tail(&task->list, &core->task_queue); + core->task_queue_size += 1; + spin_unlock_irqrestore(&core->task_queue_lock, flags); + up(&core->queue_thread_sema); + + return 0; +} + +/** + * sas_queuecommand -- Enqueue a command for processing + * @parameters: See SCSI Core documentation + * + * Note: XXX: Remove the host unlock/lock pair when SCSI Core can + * call us without holding an IRQ spinlock... + */ +int sas_queuecommand(struct scsi_cmnd *cmd, + void (*scsi_done)(struct scsi_cmnd *)) +{ + int res = 0; + struct domain_device *dev = cmd_to_domain_dev(cmd); + struct Scsi_Host *host = cmd->device->host; + struct sas_internal *i = to_sas_internal(host->transportt); + + spin_unlock_irq(host->host_lock); + + { + struct sas_ha_struct *sas_ha = dev->port->ha; + struct sas_task *task; + + res = -ENOMEM; + task = sas_create_task(cmd, dev, GFP_ATOMIC); + if (!task) + goto out; + + cmd->scsi_done = scsi_done; + /* Queue up, Direct Mode or Task Collector Mode. */ + if (sas_ha->lldd_max_execute_num < 2) + res = i->dft->lldd_execute_task(task, 1, GFP_ATOMIC); + else + res = sas_queue_up(task); + + /* Examine */ + if (res) { + SAS_DPRINTK("lldd_execute_task returned: %d\n", res); + ASSIGN_SAS_TASK(cmd, NULL); + sas_free_task(task); + if (res == -SAS_QUEUE_FULL) { + cmd->result = DID_SOFT_ERROR << 16; /* retry */ + res = 0; + scsi_done(cmd); + } + goto out; + } + } +out: + spin_lock_irq(host->host_lock); + return res; +} + +static void sas_scsi_clear_queue_lu(struct list_head *error_q, struct scsi_cmnd *my_cmd) +{ + struct scsi_cmnd *cmd, *n; + + list_for_each_entry_safe(cmd, n, error_q, eh_entry) { + if (cmd == my_cmd) + list_del_init(&cmd->eh_entry); + } +} + +static void sas_scsi_clear_queue_I_T(struct list_head *error_q, + struct domain_device *dev) +{ + struct scsi_cmnd *cmd, *n; + + list_for_each_entry_safe(cmd, n, error_q, eh_entry) { + struct domain_device *x = cmd_to_domain_dev(cmd); + + if (x == dev) + list_del_init(&cmd->eh_entry); + } +} + +static void sas_scsi_clear_queue_port(struct list_head *error_q, + struct asd_sas_port *port) +{ + struct scsi_cmnd *cmd, *n; + + list_for_each_entry_safe(cmd, n, error_q, eh_entry) { + struct domain_device *dev = cmd_to_domain_dev(cmd); + struct asd_sas_port *x = dev->port; + + if (x == port) + list_del_init(&cmd->eh_entry); + } +} + +enum task_disposition { + TASK_IS_DONE, + TASK_IS_ABORTED, + TASK_IS_AT_LU, + TASK_IS_NOT_AT_LU, +}; + +static enum task_disposition sas_scsi_find_task(struct sas_task *task) +{ + struct sas_ha_struct *ha = task->dev->port->ha; + unsigned long flags; + int i, res; + struct sas_internal *si = + to_sas_internal(task->dev->port->ha->core.shost->transportt); + + if (ha->lldd_max_execute_num > 1) { + struct scsi_core *core = &ha->core; + struct sas_task *t, *n; + + spin_lock_irqsave(&core->task_queue_lock, flags); + list_for_each_entry_safe(t, n, &core->task_queue, list) { + if (task == t) { + list_del_init(&t->list); + spin_unlock_irqrestore(&core->task_queue_lock, + flags); + SAS_DPRINTK("%s: task 0x%p aborted from " + "task_queue\n", + __FUNCTION__, task); + return TASK_IS_ABORTED; + } + } + spin_unlock_irqrestore(&core->task_queue_lock, flags); + } + + for (i = 0; i < 5; i++) { + SAS_DPRINTK("%s: aborting task 0x%p\n", __FUNCTION__, task); + res = si->dft->lldd_abort_task(task); + + spin_lock_irqsave(&task->task_state_lock, flags); + if (task->task_state_flags & SAS_TASK_STATE_DONE) { + spin_unlock_irqrestore(&task->task_state_lock, flags); + SAS_DPRINTK("%s: task 0x%p is done\n", __FUNCTION__, + task); + return TASK_IS_DONE; + } + spin_unlock_irqrestore(&task->task_state_lock, flags); + + if (res == TMF_RESP_FUNC_COMPLETE) { + SAS_DPRINTK("%s: task 0x%p is aborted\n", + __FUNCTION__, task); + return TASK_IS_ABORTED; + } else if (si->dft->lldd_query_task) { + SAS_DPRINTK("%s: querying task 0x%p\n", + __FUNCTION__, task); + res = si->dft->lldd_query_task(task); + if (res == TMF_RESP_FUNC_SUCC) { + SAS_DPRINTK("%s: task 0x%p at LU\n", + __FUNCTION__, task); + return TASK_IS_AT_LU; + } else if (res == TMF_RESP_FUNC_COMPLETE) { + SAS_DPRINTK("%s: task 0x%p not at LU\n", + __FUNCTION__, task); + return TASK_IS_NOT_AT_LU; + } + } + } + return res; +} + +static int sas_recover_lu(struct domain_device *dev, struct scsi_cmnd *cmd) +{ + int res = TMF_RESP_FUNC_FAILED; + struct scsi_lun lun; + struct sas_internal *i = + to_sas_internal(dev->port->ha->core.shost->transportt); + + int_to_scsilun(cmd->device->lun, &lun); + + SAS_DPRINTK("eh: device %llx LUN %x has the task\n", + SAS_ADDR(dev->sas_addr), + cmd->device->lun); + + if (i->dft->lldd_abort_task_set) + res = i->dft->lldd_abort_task_set(dev, lun.scsi_lun); + + if (res == TMF_RESP_FUNC_FAILED) { + if (i->dft->lldd_clear_task_set) + res = i->dft->lldd_clear_task_set(dev, lun.scsi_lun); + } + + if (res == TMF_RESP_FUNC_FAILED) { + if (i->dft->lldd_lu_reset) + res = i->dft->lldd_lu_reset(dev, lun.scsi_lun); + } + + return res; +} + +static int sas_recover_I_T(struct domain_device *dev) +{ + int res = TMF_RESP_FUNC_FAILED; + struct sas_internal *i = + to_sas_internal(dev->port->ha->core.shost->transportt); + + SAS_DPRINTK("I_T nexus reset for dev %016llx\n", + SAS_ADDR(dev->sas_addr)); + + if (i->dft->lldd_I_T_nexus_reset) + res = i->dft->lldd_I_T_nexus_reset(dev); + + return res; +} + +void sas_scsi_recover_host(struct Scsi_Host *shost) +{ + struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost); + unsigned long flags; + LIST_HEAD(error_q); + struct scsi_cmnd *cmd, *n; + enum task_disposition res = TASK_IS_DONE; + int tmf_resp; + struct sas_internal *i = to_sas_internal(shost->transportt); + + spin_lock_irqsave(shost->host_lock, flags); + list_splice_init(&shost->eh_cmd_q, &error_q); + spin_unlock_irqrestore(shost->host_lock, flags); + + SAS_DPRINTK("Enter %s\n", __FUNCTION__); + + /* All tasks on this list were marked SAS_TASK_STATE_ABORTED + * by sas_scsi_timed_out() callback. + */ +Again: + SAS_DPRINTK("going over list...\n"); + list_for_each_entry_safe(cmd, n, &error_q, eh_entry) { + struct sas_task *task = TO_SAS_TASK(cmd); + + SAS_DPRINTK("trying to find task 0x%p\n", task); + list_del_init(&cmd->eh_entry); + res = sas_scsi_find_task(task); + + cmd->eh_eflags = 0; + shost->host_failed--; + + switch (res) { + case TASK_IS_DONE: + SAS_DPRINTK("%s: task 0x%p is done\n", __FUNCTION__, + task); + task->task_done(task); + continue; + case TASK_IS_ABORTED: + SAS_DPRINTK("%s: task 0x%p is aborted\n", + __FUNCTION__, task); + task->task_done(task); + continue; + case TASK_IS_AT_LU: + SAS_DPRINTK("task 0x%p is at LU: lu recover\n", task); + tmf_resp = sas_recover_lu(task->dev, cmd); + if (tmf_resp == TMF_RESP_FUNC_COMPLETE) { + SAS_DPRINTK("dev %016llx LU %x is " + "recovered\n", + SAS_ADDR(task->dev), + cmd->device->lun); + task->task_done(task); + sas_scsi_clear_queue_lu(&error_q, cmd); + goto Again; + } + /* fallthrough */ + case TASK_IS_NOT_AT_LU: + SAS_DPRINTK("task 0x%p is not at LU: I_T recover\n", + task); + tmf_resp = sas_recover_I_T(task->dev); + if (tmf_resp == TMF_RESP_FUNC_COMPLETE) { + SAS_DPRINTK("I_T %016llx recovered\n", + SAS_ADDR(task->dev->sas_addr)); + task->task_done(task); + sas_scsi_clear_queue_I_T(&error_q, task->dev); + goto Again; + } + /* Hammer time :-) */ + if (i->dft->lldd_clear_nexus_port) { + struct asd_sas_port *port = task->dev->port; + SAS_DPRINTK("clearing nexus for port:%d\n", + port->id); + res = i->dft->lldd_clear_nexus_port(port); + if (res == TMF_RESP_FUNC_COMPLETE) { + SAS_DPRINTK("clear nexus port:%d " + "succeeded\n", port->id); + task->task_done(task); + sas_scsi_clear_queue_port(&error_q, + port); + goto Again; + } + } + if (i->dft->lldd_clear_nexus_ha) { + SAS_DPRINTK("clear nexus ha\n"); + res = i->dft->lldd_clear_nexus_ha(ha); + if (res == TMF_RESP_FUNC_COMPLETE) { + SAS_DPRINTK("clear nexus ha " + "succeeded\n"); + task->task_done(task); + goto out; + } + } + /* If we are here -- this means that no amount + * of effort could recover from errors. Quite + * possibly the HA just disappeared. + */ + SAS_DPRINTK("error from device %llx, LUN %x " + "couldn't be recovered in any way\n", + SAS_ADDR(task->dev->sas_addr), + cmd->device->lun); + + task->task_done(task); + goto clear_q; + } + } +out: + SAS_DPRINTK("--- Exit %s\n", __FUNCTION__); + return; +clear_q: + SAS_DPRINTK("--- Exit %s -- clear_q\n", __FUNCTION__); + list_for_each_entry_safe(cmd, n, &error_q, eh_entry) { + struct sas_task *task = TO_SAS_TASK(cmd); + list_del_init(&cmd->eh_entry); + task->task_done(task); + } +} + +enum scsi_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *cmd) +{ + struct sas_task *task = TO_SAS_TASK(cmd); + unsigned long flags; + + if (!task) { + SAS_DPRINTK("command 0x%p, task 0x%p, timed out: EH_HANDLED\n", + cmd, task); + return EH_HANDLED; + } + + spin_lock_irqsave(&task->task_state_lock, flags); + if (task->task_state_flags & SAS_TASK_STATE_DONE) { + spin_unlock_irqrestore(&task->task_state_lock, flags); + SAS_DPRINTK("command 0x%p, task 0x%p, timed out: EH_HANDLED\n", + cmd, task); + return EH_HANDLED; + } + task->task_state_flags |= SAS_TASK_STATE_ABORTED; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + SAS_DPRINTK("command 0x%p, task 0x%p, timed out: EH_NOT_HANDLED\n", + cmd, task); + + return EH_NOT_HANDLED; +} + +struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy) +{ + struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent); + struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost); + struct domain_device *found_dev = NULL; + int i; + + spin_lock(&ha->phy_port_lock); + for (i = 0; i < ha->num_phys; i++) { + struct asd_sas_port *port = ha->sas_port[i]; + struct domain_device *dev; + + spin_lock(&port->dev_list_lock); + list_for_each_entry(dev, &port->dev_list, dev_list_node) { + if (rphy == dev->rphy) { + found_dev = dev; + spin_unlock(&port->dev_list_lock); + goto found; + } + } + spin_unlock(&port->dev_list_lock); + } + found: + spin_unlock(&ha->phy_port_lock); + + return found_dev; +} + +static inline struct domain_device *sas_find_target(struct scsi_target *starget) +{ + struct sas_rphy *rphy = dev_to_rphy(starget->dev.parent); + + return sas_find_dev_by_rphy(rphy); +} + +int sas_target_alloc(struct scsi_target *starget) +{ + struct domain_device *found_dev = sas_find_target(starget); + + if (!found_dev) + return -ENODEV; + + starget->hostdata = found_dev; + return 0; +} + +#define SAS_DEF_QD 32 +#define SAS_MAX_QD 64 + +int sas_slave_configure(struct scsi_device *scsi_dev) +{ + struct domain_device *dev = sdev_to_domain_dev(scsi_dev); + struct sas_ha_struct *sas_ha; + + BUG_ON(dev->rphy->identify.device_type != SAS_END_DEVICE); + + sas_ha = dev->port->ha; + + sas_read_port_mode_page(scsi_dev); + + if (scsi_dev->tagged_supported) { + scsi_set_tag_type(scsi_dev, MSG_SIMPLE_TAG); + scsi_activate_tcq(scsi_dev, SAS_DEF_QD); + } else { + SAS_DPRINTK("device %llx, LUN %x doesn't support " + "TCQ\n", SAS_ADDR(dev->sas_addr), + scsi_dev->lun); + scsi_dev->tagged_supported = 0; + scsi_set_tag_type(scsi_dev, 0); + scsi_deactivate_tcq(scsi_dev, 1); + } + + return 0; +} + +void sas_slave_destroy(struct scsi_device *scsi_dev) +{ +} + +int sas_change_queue_depth(struct scsi_device *scsi_dev, int new_depth) +{ + int res = min(new_depth, SAS_MAX_QD); + + if (scsi_dev->tagged_supported) + scsi_adjust_queue_depth(scsi_dev, scsi_get_tag_type(scsi_dev), + res); + else { + struct domain_device *dev = sdev_to_domain_dev(scsi_dev); + sas_printk("device %llx LUN %x queue depth changed to 1\n", + SAS_ADDR(dev->sas_addr), + scsi_dev->lun); + scsi_adjust_queue_depth(scsi_dev, 0, 1); + res = 1; + } + + return res; +} + +int sas_change_queue_type(struct scsi_device *scsi_dev, int qt) +{ + if (!scsi_dev->tagged_supported) + return 0; + + scsi_deactivate_tcq(scsi_dev, 1); + + scsi_set_tag_type(scsi_dev, qt); + scsi_activate_tcq(scsi_dev, scsi_dev->queue_depth); + + return qt; +} + +int sas_bios_param(struct scsi_device *scsi_dev, + struct block_device *bdev, + sector_t capacity, int *hsc) +{ + hsc[0] = 255; + hsc[1] = 63; + sector_div(capacity, 255*63); + hsc[2] = capacity; + + return 0; +} + +/* ---------- Task Collector Thread implementation ---------- */ + +static void sas_queue(struct sas_ha_struct *sas_ha) +{ + struct scsi_core *core = &sas_ha->core; + unsigned long flags; + LIST_HEAD(q); + int can_queue; + int res; + struct sas_internal *i = to_sas_internal(core->shost->transportt); + + spin_lock_irqsave(&core->task_queue_lock, flags); + while (!core->queue_thread_kill && + !list_empty(&core->task_queue)) { + + can_queue = sas_ha->lldd_queue_size - core->task_queue_size; + if (can_queue >= 0) { + can_queue = core->task_queue_size; + list_splice_init(&core->task_queue, &q); + } else { + struct list_head *a, *n; + + can_queue = sas_ha->lldd_queue_size; + list_for_each_safe(a, n, &core->task_queue) { + list_move_tail(a, &q); + if (--can_queue == 0) + break; + } + can_queue = sas_ha->lldd_queue_size; + } + core->task_queue_size -= can_queue; + spin_unlock_irqrestore(&core->task_queue_lock, flags); + { + struct sas_task *task = list_entry(q.next, + struct sas_task, + list); + list_del_init(&q); + res = i->dft->lldd_execute_task(task, can_queue, + GFP_KERNEL); + if (unlikely(res)) + __list_add(&q, task->list.prev, &task->list); + } + spin_lock_irqsave(&core->task_queue_lock, flags); + if (res) { + list_splice_init(&q, &core->task_queue); /*at head*/ + core->task_queue_size += can_queue; + } + } + spin_unlock_irqrestore(&core->task_queue_lock, flags); +} + +static DECLARE_COMPLETION(queue_th_comp); + +/** + * sas_queue_thread -- The Task Collector thread + * @_sas_ha: pointer to struct sas_ha + */ +static int sas_queue_thread(void *_sas_ha) +{ + struct sas_ha_struct *sas_ha = _sas_ha; + struct scsi_core *core = &sas_ha->core; + + daemonize("sas_queue_%d", core->shost->host_no); + current->flags |= PF_NOFREEZE; + + complete(&queue_th_comp); + + while (1) { + down_interruptible(&core->queue_thread_sema); + sas_queue(sas_ha); + if (core->queue_thread_kill) + break; + } + + complete(&queue_th_comp); + + return 0; +} + +int sas_init_queue(struct sas_ha_struct *sas_ha) +{ + int res; + struct scsi_core *core = &sas_ha->core; + + spin_lock_init(&core->task_queue_lock); + core->task_queue_size = 0; + INIT_LIST_HEAD(&core->task_queue); + init_MUTEX_LOCKED(&core->queue_thread_sema); + + res = kernel_thread(sas_queue_thread, sas_ha, 0); + if (res >= 0) + wait_for_completion(&queue_th_comp); + + return res < 0 ? res : 0; +} + +void sas_shutdown_queue(struct sas_ha_struct *sas_ha) +{ + unsigned long flags; + struct scsi_core *core = &sas_ha->core; + struct sas_task *task, *n; + + init_completion(&queue_th_comp); + core->queue_thread_kill = 1; + up(&core->queue_thread_sema); + wait_for_completion(&queue_th_comp); + + if (!list_empty(&core->task_queue)) + SAS_DPRINTK("HA: %llx: scsi core task queue is NOT empty!?\n", + SAS_ADDR(sas_ha->sas_addr)); + + spin_lock_irqsave(&core->task_queue_lock, flags); + list_for_each_entry_safe(task, n, &core->task_queue, list) { + struct scsi_cmnd *cmd = task->uldd_task; + + list_del_init(&task->list); + + ASSIGN_SAS_TASK(cmd, NULL); + sas_free_task(task); + cmd->result = DID_ABORT << 16; + cmd->scsi_done(cmd); + } + spin_unlock_irqrestore(&core->task_queue_lock, flags); +} + +EXPORT_SYMBOL_GPL(sas_queuecommand); +EXPORT_SYMBOL_GPL(sas_target_alloc); +EXPORT_SYMBOL_GPL(sas_slave_configure); +EXPORT_SYMBOL_GPL(sas_slave_destroy); +EXPORT_SYMBOL_GPL(sas_change_queue_depth); +EXPORT_SYMBOL_GPL(sas_change_queue_type); +EXPORT_SYMBOL_GPL(sas_bios_param); diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 087c44539a1..3f7f5f8abd7 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -21,10 +21,12 @@ struct lpfc_sli2_slim; -#define LPFC_MAX_TARGET 256 /* max targets supported */ -#define LPFC_MAX_DISC_THREADS 64 /* max outstanding discovery els req */ -#define LPFC_MAX_NS_RETRY 3 /* max NameServer retries */ +#define LPFC_MAX_TARGET 256 /* max number of targets supported */ +#define LPFC_MAX_DISC_THREADS 64 /* max outstanding discovery els + requests */ +#define LPFC_MAX_NS_RETRY 3 /* Number of retry attempts to contact + the NameServer before giving up. */ #define LPFC_DFT_HBA_Q_DEPTH 2048 /* max cmds per hba */ #define LPFC_LC_HBA_Q_DEPTH 1024 /* max cmds per low cost hba */ #define LPFC_LP101_HBA_Q_DEPTH 128 /* max cmds per low cost hba */ @@ -41,7 +43,6 @@ struct lpfc_sli2_slim; (( (u64)(high)<<16 ) << 16)|( (u64)(low)))) /* Provide maximum configuration definitions. */ #define LPFC_DRVR_TIMEOUT 16 /* driver iocb timeout value in sec */ -#define MAX_FCP_TARGET 256 /* max num of FCP targets supported */ #define FC_MAX_ADPTMSG 64 #define MAX_HBAEVT 32 @@ -174,7 +175,6 @@ struct lpfc_hba { dma_addr_t slim2p_mapping; uint16_t pci_cfg_value; - struct semaphore hba_can_block; int32_t hba_state; #define LPFC_STATE_UNKNOWN 0 /* HBA state is unknown */ @@ -285,6 +285,7 @@ struct lpfc_hba { uint32_t cfg_log_verbose; uint32_t cfg_lun_queue_depth; uint32_t cfg_nodev_tmo; + uint32_t cfg_devloss_tmo; uint32_t cfg_hba_queue_depth; uint32_t cfg_fcp_class; uint32_t cfg_use_adisc; @@ -302,6 +303,9 @@ struct lpfc_hba { uint32_t cfg_poll_tmo; uint32_t cfg_sg_seg_cnt; uint32_t cfg_sg_dma_buf_size; + uint64_t cfg_soft_wwpn; + + uint32_t dev_loss_tmo_changed; lpfc_vpd_t vpd; /* vital product data */ @@ -351,6 +355,8 @@ struct lpfc_hba { #define VPD_PORT 0x8 /* valid vpd port data */ #define VPD_MASK 0xf /* mask for any vpd data */ + uint8_t soft_wwpn_enable; + struct timer_list fcp_poll_timer; struct timer_list els_tmofunc; @@ -391,3 +397,5 @@ struct rnidrsp { struct list_head list; uint32_t data; }; + +#define FC_REG_DUMP_EVENT 0x10 /* Register for Dump events */ diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index b62a72dfab2..9496e87c135 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -39,6 +39,9 @@ #include "lpfc_compat.h" #include "lpfc_crtn.h" +#define LPFC_DEF_DEVLOSS_TMO 30 +#define LPFC_MIN_DEVLOSS_TMO 1 +#define LPFC_MAX_DEVLOSS_TMO 255 static void lpfc_jedec_to_ascii(int incr, char hdw[]) @@ -219,8 +222,18 @@ lpfc_issue_lip(struct Scsi_Host *host) return -ENOMEM; memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t)); - lpfc_init_link(phba, pmboxq, phba->cfg_topology, phba->cfg_link_speed); - mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); + pmboxq->mb.mbxCommand = MBX_DOWN_LINK; + pmboxq->mb.mbxOwner = OWN_HOST; + + mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO * 2); + + if ((mbxstatus == MBX_SUCCESS) && (pmboxq->mb.mbxStatus == 0)) { + memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t)); + lpfc_init_link(phba, pmboxq, phba->cfg_topology, + phba->cfg_link_speed); + mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, + phba->fc_ratov * 2); + } if (mbxstatus == MBX_TIMEOUT) pmboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl; @@ -233,51 +246,53 @@ lpfc_issue_lip(struct Scsi_Host *host) return 0; } -static ssize_t -lpfc_nport_evt_cnt_show(struct class_device *cdev, char *buf) +static int +lpfc_selective_reset(struct lpfc_hba *phba) { - struct Scsi_Host *host = class_to_shost(cdev); - struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata; - return snprintf(buf, PAGE_SIZE, "%d\n", phba->nport_event_cnt); + struct completion online_compl; + int status = 0; + + init_completion(&online_compl); + lpfc_workq_post_event(phba, &status, &online_compl, + LPFC_EVT_OFFLINE); + wait_for_completion(&online_compl); + + if (status != 0) + return -EIO; + + init_completion(&online_compl); + lpfc_workq_post_event(phba, &status, &online_compl, + LPFC_EVT_ONLINE); + wait_for_completion(&online_compl); + + if (status != 0) + return -EIO; + + return 0; } static ssize_t -lpfc_board_online_show(struct class_device *cdev, char *buf) +lpfc_issue_reset(struct class_device *cdev, const char *buf, size_t count) { struct Scsi_Host *host = class_to_shost(cdev); struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata; + int status = -EINVAL; - if (phba->fc_flag & FC_OFFLINE_MODE) - return snprintf(buf, PAGE_SIZE, "0\n"); + if (strncmp(buf, "selective", sizeof("selective") - 1) == 0) + status = lpfc_selective_reset(phba); + + if (status == 0) + return strlen(buf); else - return snprintf(buf, PAGE_SIZE, "1\n"); + return status; } static ssize_t -lpfc_board_online_store(struct class_device *cdev, const char *buf, - size_t count) +lpfc_nport_evt_cnt_show(struct class_device *cdev, char *buf) { struct Scsi_Host *host = class_to_shost(cdev); struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata; - struct completion online_compl; - int val=0, status=0; - - if (sscanf(buf, "%d", &val) != 1) - return -EINVAL; - - init_completion(&online_compl); - - if (val) - lpfc_workq_post_event(phba, &status, &online_compl, - LPFC_EVT_ONLINE); - else - lpfc_workq_post_event(phba, &status, &online_compl, - LPFC_EVT_OFFLINE); - wait_for_completion(&online_compl); - if (!status) - return strlen(buf); - else - return -EIO; + return snprintf(buf, PAGE_SIZE, "%d\n", phba->nport_event_cnt); } static ssize_t @@ -532,10 +547,122 @@ static CLASS_DEVICE_ATTR(lpfc_drvr_version, S_IRUGO, lpfc_drvr_version_show, NULL); static CLASS_DEVICE_ATTR(management_version, S_IRUGO, management_version_show, NULL); -static CLASS_DEVICE_ATTR(board_online, S_IRUGO | S_IWUSR, - lpfc_board_online_show, lpfc_board_online_store); static CLASS_DEVICE_ATTR(board_mode, S_IRUGO | S_IWUSR, lpfc_board_mode_show, lpfc_board_mode_store); +static CLASS_DEVICE_ATTR(issue_reset, S_IWUSR, NULL, lpfc_issue_reset); + + +static char *lpfc_soft_wwpn_key = "C99G71SL8032A"; + +static ssize_t +lpfc_soft_wwpn_enable_store(struct class_device *cdev, const char *buf, + size_t count) +{ + struct Scsi_Host *host = class_to_shost(cdev); + struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata; + unsigned int cnt = count; + + /* + * We're doing a simple sanity check for soft_wwpn setting. + * We require that the user write a specific key to enable + * the soft_wwpn attribute to be settable. Once the attribute + * is written, the enable key resets. If further updates are + * desired, the key must be written again to re-enable the + * attribute. + * + * The "key" is not secret - it is a hardcoded string shown + * here. The intent is to protect against the random user or + * application that is just writing attributes. + */ + + /* count may include a LF at end of string */ + if (buf[cnt-1] == '\n') + cnt--; + + if ((cnt != strlen(lpfc_soft_wwpn_key)) || + (strncmp(buf, lpfc_soft_wwpn_key, strlen(lpfc_soft_wwpn_key)) != 0)) + return -EINVAL; + + phba->soft_wwpn_enable = 1; + return count; +} +static CLASS_DEVICE_ATTR(lpfc_soft_wwpn_enable, S_IWUSR, NULL, + lpfc_soft_wwpn_enable_store); + +static ssize_t +lpfc_soft_wwpn_show(struct class_device *cdev, char *buf) +{ + struct Scsi_Host *host = class_to_shost(cdev); + struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata; + return snprintf(buf, PAGE_SIZE, "0x%llx\n", phba->cfg_soft_wwpn); +} + + +static ssize_t +lpfc_soft_wwpn_store(struct class_device *cdev, const char *buf, size_t count) +{ + struct Scsi_Host *host = class_to_shost(cdev); + struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata; + struct completion online_compl; + int stat1=0, stat2=0; + unsigned int i, j, cnt=count; + u8 wwpn[8]; + + /* count may include a LF at end of string */ + if (buf[cnt-1] == '\n') + cnt--; + + if (!phba->soft_wwpn_enable || (cnt < 16) || (cnt > 18) || + ((cnt == 17) && (*buf++ != 'x')) || + ((cnt == 18) && ((*buf++ != '0') || (*buf++ != 'x')))) + return -EINVAL; + + phba->soft_wwpn_enable = 0; + + memset(wwpn, 0, sizeof(wwpn)); + + /* Validate and store the new name */ + for (i=0, j=0; i < 16; i++) { + if ((*buf >= 'a') && (*buf <= 'f')) + j = ((j << 4) | ((*buf++ -'a') + 10)); + else if ((*buf >= 'A') && (*buf <= 'F')) + j = ((j << 4) | ((*buf++ -'A') + 10)); + else if ((*buf >= '0') && (*buf <= '9')) + j = ((j << 4) | (*buf++ -'0')); + else + return -EINVAL; + if (i % 2) { + wwpn[i/2] = j & 0xff; + j = 0; + } + } + phba->cfg_soft_wwpn = wwn_to_u64(wwpn); + fc_host_port_name(host) = phba->cfg_soft_wwpn; + + dev_printk(KERN_NOTICE, &phba->pcidev->dev, + "lpfc%d: Reinitializing to use soft_wwpn\n", phba->brd_no); + + init_completion(&online_compl); + lpfc_workq_post_event(phba, &stat1, &online_compl, LPFC_EVT_OFFLINE); + wait_for_completion(&online_compl); + if (stat1) + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "%d:0463 lpfc_soft_wwpn attribute set failed to reinit " + "adapter - %d\n", phba->brd_no, stat1); + + init_completion(&online_compl); + lpfc_workq_post_event(phba, &stat2, &online_compl, LPFC_EVT_ONLINE); + wait_for_completion(&online_compl); + if (stat2) + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "%d:0464 lpfc_soft_wwpn attribute set failed to reinit " + "adapter - %d\n", phba->brd_no, stat2); + + return (stat1 || stat2) ? -EIO : count; +} +static CLASS_DEVICE_ATTR(lpfc_soft_wwpn, S_IRUGO | S_IWUSR,\ + lpfc_soft_wwpn_show, lpfc_soft_wwpn_store); + static int lpfc_poll = 0; module_param(lpfc_poll, int, 0); @@ -548,6 +675,123 @@ static CLASS_DEVICE_ATTR(lpfc_poll, S_IRUGO | S_IWUSR, lpfc_poll_show, lpfc_poll_store); /* +# lpfc_nodev_tmo: If set, it will hold all I/O errors on devices that disappear +# until the timer expires. Value range is [0,255]. Default value is 30. +*/ +static int lpfc_nodev_tmo = LPFC_DEF_DEVLOSS_TMO; +static int lpfc_devloss_tmo = LPFC_DEF_DEVLOSS_TMO; +module_param(lpfc_nodev_tmo, int, 0); +MODULE_PARM_DESC(lpfc_nodev_tmo, + "Seconds driver will hold I/O waiting " + "for a device to come back"); +static ssize_t +lpfc_nodev_tmo_show(struct class_device *cdev, char *buf) +{ + struct Scsi_Host *host = class_to_shost(cdev); + struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata; + int val = 0; + val = phba->cfg_devloss_tmo; + return snprintf(buf, PAGE_SIZE, "%d\n", + phba->cfg_devloss_tmo); +} + +static int +lpfc_nodev_tmo_init(struct lpfc_hba *phba, int val) +{ + static int warned; + if (phba->cfg_devloss_tmo != LPFC_DEF_DEVLOSS_TMO) { + phba->cfg_nodev_tmo = phba->cfg_devloss_tmo; + if (!warned && val != LPFC_DEF_DEVLOSS_TMO) { + warned = 1; + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "%d:0402 Ignoring nodev_tmo module " + "parameter because devloss_tmo is" + " set.\n", + phba->brd_no); + } + return 0; + } + + if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) { + phba->cfg_nodev_tmo = val; + phba->cfg_devloss_tmo = val; + return 0; + } + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "%d:0400 lpfc_nodev_tmo attribute cannot be set to %d, " + "allowed range is [%d, %d]\n", + phba->brd_no, val, + LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO); + phba->cfg_nodev_tmo = LPFC_DEF_DEVLOSS_TMO; + return -EINVAL; +} + +static int +lpfc_nodev_tmo_set(struct lpfc_hba *phba, int val) +{ + if (phba->dev_loss_tmo_changed || + (lpfc_devloss_tmo != LPFC_DEF_DEVLOSS_TMO)) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "%d:0401 Ignoring change to nodev_tmo " + "because devloss_tmo is set.\n", + phba->brd_no); + return 0; + } + + if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) { + phba->cfg_nodev_tmo = val; + phba->cfg_devloss_tmo = val; + return 0; + } + + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "%d:0403 lpfc_nodev_tmo attribute cannot be set to %d, " + "allowed range is [%d, %d]\n", + phba->brd_no, val, LPFC_MIN_DEVLOSS_TMO, + LPFC_MAX_DEVLOSS_TMO); + return -EINVAL; +} + +lpfc_param_store(nodev_tmo) + +static CLASS_DEVICE_ATTR(lpfc_nodev_tmo, S_IRUGO | S_IWUSR, + lpfc_nodev_tmo_show, lpfc_nodev_tmo_store); + +/* +# lpfc_devloss_tmo: If set, it will hold all I/O errors on devices that +# disappear until the timer expires. Value range is [0,255]. Default +# value is 30. +*/ +module_param(lpfc_devloss_tmo, int, 0); +MODULE_PARM_DESC(lpfc_devloss_tmo, + "Seconds driver will hold I/O waiting " + "for a device to come back"); +lpfc_param_init(devloss_tmo, LPFC_DEF_DEVLOSS_TMO, + LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO) +lpfc_param_show(devloss_tmo) +static int +lpfc_devloss_tmo_set(struct lpfc_hba *phba, int val) +{ + if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) { + phba->cfg_nodev_tmo = val; + phba->cfg_devloss_tmo = val; + phba->dev_loss_tmo_changed = 1; + return 0; + } + + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "%d:0404 lpfc_devloss_tmo attribute cannot be set to" + " %d, allowed range is [%d, %d]\n", + phba->brd_no, val, LPFC_MIN_DEVLOSS_TMO, + LPFC_MAX_DEVLOSS_TMO); + return -EINVAL; +} + +lpfc_param_store(devloss_tmo) +static CLASS_DEVICE_ATTR(lpfc_devloss_tmo, S_IRUGO | S_IWUSR, + lpfc_devloss_tmo_show, lpfc_devloss_tmo_store); + +/* # lpfc_log_verbose: Only turn this flag on if you are willing to risk being # deluged with LOTS of information. # You can set a bit mask to record specific types of verbose messages: @@ -606,14 +850,6 @@ LPFC_ATTR_R(scan_down, 1, 0, 1, "Start scanning for devices from highest ALPA to lowest"); /* -# lpfc_nodev_tmo: If set, it will hold all I/O errors on devices that disappear -# until the timer expires. Value range is [0,255]. Default value is 30. -# NOTE: this MUST be less then the SCSI Layer command timeout - 1. -*/ -LPFC_ATTR_RW(nodev_tmo, 30, 0, 255, - "Seconds driver will hold I/O waiting for a device to come back"); - -/* # lpfc_topology: link topology for init link # 0x0 = attempt loop mode then point-to-point # 0x01 = internal loopback mode @@ -695,12 +931,12 @@ LPFC_ATTR(discovery_threads, 32, 1, 64, "Maximum number of ELS commands " "during discovery"); /* -# lpfc_max_luns: maximum number of LUNs per target driver will support -# Value range is [1,32768]. Default value is 256. -# NOTE: The SCSI layer will scan each target for this many luns +# lpfc_max_luns: maximum allowed LUN. +# Value range is [0,65535]. Default value is 255. +# NOTE: The SCSI layer might probe all allowed LUN on some old targets. */ -LPFC_ATTR_R(max_luns, 256, 1, 32768, - "Maximum number of LUNs per target driver will support"); +LPFC_ATTR_R(max_luns, 255, 0, 65535, + "Maximum allowed LUN"); /* # lpfc_poll_tmo: .Milliseconds driver will wait between polling FCP ring. @@ -709,6 +945,7 @@ LPFC_ATTR_R(max_luns, 256, 1, 32768, LPFC_ATTR_RW(poll_tmo, 10, 1, 255, "Milliseconds driver will wait between polling FCP ring"); + struct class_device_attribute *lpfc_host_attrs[] = { &class_device_attr_info, &class_device_attr_serialnum, @@ -726,6 +963,7 @@ struct class_device_attribute *lpfc_host_attrs[] = { &class_device_attr_lpfc_lun_queue_depth, &class_device_attr_lpfc_hba_queue_depth, &class_device_attr_lpfc_nodev_tmo, + &class_device_attr_lpfc_devloss_tmo, &class_device_attr_lpfc_fcp_class, &class_device_attr_lpfc_use_adisc, &class_device_attr_lpfc_ack0, @@ -739,10 +977,12 @@ struct class_device_attribute *lpfc_host_attrs[] = { &class_device_attr_lpfc_max_luns, &class_device_attr_nport_evt_cnt, &class_device_attr_management_version, - &class_device_attr_board_online, &class_device_attr_board_mode, + &class_device_attr_issue_reset, &class_device_attr_lpfc_poll, &class_device_attr_lpfc_poll_tmo, + &class_device_attr_lpfc_soft_wwpn, + &class_device_attr_lpfc_soft_wwpn_enable, NULL, }; @@ -873,7 +1113,7 @@ sysfs_mbox_write(struct kobject *kobj, char *buf, loff_t off, size_t count) phba->sysfs_mbox.mbox == NULL ) { sysfs_mbox_idle(phba); spin_unlock_irq(host->host_lock); - return -EINVAL; + return -EAGAIN; } } @@ -989,14 +1229,15 @@ sysfs_mbox_read(struct kobject *kobj, char *buf, loff_t off, size_t count) spin_unlock_irq(phba->host->host_lock); rc = lpfc_sli_issue_mbox_wait (phba, phba->sysfs_mbox.mbox, - phba->fc_ratov * 2); + lpfc_mbox_tmo_val(phba, + phba->sysfs_mbox.mbox->mb.mbxCommand) * HZ); spin_lock_irq(phba->host->host_lock); } if (rc != MBX_SUCCESS) { sysfs_mbox_idle(phba); spin_unlock_irq(host->host_lock); - return -ENODEV; + return (rc == MBX_TIMEOUT) ? -ETIME : -ENODEV; } phba->sysfs_mbox.state = SMBOX_READING; } @@ -1005,7 +1246,7 @@ sysfs_mbox_read(struct kobject *kobj, char *buf, loff_t off, size_t count) printk(KERN_WARNING "mbox_read: Bad State\n"); sysfs_mbox_idle(phba); spin_unlock_irq(host->host_lock); - return -EINVAL; + return -EAGAIN; } memcpy(buf, (uint8_t *) & phba->sysfs_mbox.mbox->mb + off, count); @@ -1192,6 +1433,15 @@ lpfc_get_host_fabric_name (struct Scsi_Host *shost) fc_host_fabric_name(shost) = node_name; } +static void +lpfc_get_host_symbolic_name (struct Scsi_Host *shost) +{ + struct lpfc_hba *phba = (struct lpfc_hba*)shost->hostdata; + + spin_lock_irq(shost->host_lock); + lpfc_get_hba_sym_node_name(phba, fc_host_symbolic_name(shost)); + spin_unlock_irq(shost->host_lock); +} static struct fc_host_statistics * lpfc_get_stats(struct Scsi_Host *shost) @@ -1199,8 +1449,10 @@ lpfc_get_stats(struct Scsi_Host *shost) struct lpfc_hba *phba = (struct lpfc_hba *)shost->hostdata; struct lpfc_sli *psli = &phba->sli; struct fc_host_statistics *hs = &phba->link_stats; + struct lpfc_lnk_stat * lso = &psli->lnk_stat_offsets; LPFC_MBOXQ_t *pmboxq; MAILBOX_t *pmb; + unsigned long seconds; int rc = 0; pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); @@ -1261,22 +1513,103 @@ lpfc_get_stats(struct Scsi_Host *shost) hs->invalid_crc_count = pmb->un.varRdLnk.crcCnt; hs->error_frames = pmb->un.varRdLnk.crcCnt; + hs->link_failure_count -= lso->link_failure_count; + hs->loss_of_sync_count -= lso->loss_of_sync_count; + hs->loss_of_signal_count -= lso->loss_of_signal_count; + hs->prim_seq_protocol_err_count -= lso->prim_seq_protocol_err_count; + hs->invalid_tx_word_count -= lso->invalid_tx_word_count; + hs->invalid_crc_count -= lso->invalid_crc_count; + hs->error_frames -= lso->error_frames; + if (phba->fc_topology == TOPOLOGY_LOOP) { hs->lip_count = (phba->fc_eventTag >> 1); + hs->lip_count -= lso->link_events; hs->nos_count = -1; } else { hs->lip_count = -1; hs->nos_count = (phba->fc_eventTag >> 1); + hs->nos_count -= lso->link_events; } hs->dumped_frames = -1; -/* FIX ME */ - /*hs->SecondsSinceLastReset = (jiffies - lpfc_loadtime) / HZ;*/ + seconds = get_seconds(); + if (seconds < psli->stats_start) + hs->seconds_since_last_reset = seconds + + ((unsigned long)-1 - psli->stats_start); + else + hs->seconds_since_last_reset = seconds - psli->stats_start; return hs; } +static void +lpfc_reset_stats(struct Scsi_Host *shost) +{ + struct lpfc_hba *phba = (struct lpfc_hba *)shost->hostdata; + struct lpfc_sli *psli = &phba->sli; + struct lpfc_lnk_stat * lso = &psli->lnk_stat_offsets; + LPFC_MBOXQ_t *pmboxq; + MAILBOX_t *pmb; + int rc = 0; + + pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!pmboxq) + return; + memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); + + pmb = &pmboxq->mb; + pmb->mbxCommand = MBX_READ_STATUS; + pmb->mbxOwner = OWN_HOST; + pmb->un.varWords[0] = 0x1; /* reset request */ + pmboxq->context1 = NULL; + + if ((phba->fc_flag & FC_OFFLINE_MODE) || + (!(psli->sli_flag & LPFC_SLI2_ACTIVE))) + rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL); + else + rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); + + if (rc != MBX_SUCCESS) { + if (rc == MBX_TIMEOUT) + pmboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl; + else + mempool_free(pmboxq, phba->mbox_mem_pool); + return; + } + + memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); + pmb->mbxCommand = MBX_READ_LNK_STAT; + pmb->mbxOwner = OWN_HOST; + pmboxq->context1 = NULL; + + if ((phba->fc_flag & FC_OFFLINE_MODE) || + (!(psli->sli_flag & LPFC_SLI2_ACTIVE))) + rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL); + else + rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); + + if (rc != MBX_SUCCESS) { + if (rc == MBX_TIMEOUT) + pmboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl; + else + mempool_free( pmboxq, phba->mbox_mem_pool); + return; + } + + lso->link_failure_count = pmb->un.varRdLnk.linkFailureCnt; + lso->loss_of_sync_count = pmb->un.varRdLnk.lossSyncCnt; + lso->loss_of_signal_count = pmb->un.varRdLnk.lossSignalCnt; + lso->prim_seq_protocol_err_count = pmb->un.varRdLnk.primSeqErrCnt; + lso->invalid_tx_word_count = pmb->un.varRdLnk.invalidXmitWord; + lso->invalid_crc_count = pmb->un.varRdLnk.crcCnt; + lso->error_frames = pmb->un.varRdLnk.crcCnt; + lso->link_events = (phba->fc_eventTag >> 1); + + psli->stats_start = get_seconds(); + + return; +} /* * The LPFC driver treats linkdown handling as target loss events so there @@ -1346,27 +1679,12 @@ lpfc_get_starget_port_name(struct scsi_target *starget) } static void -lpfc_get_rport_loss_tmo(struct fc_rport *rport) -{ - /* - * Return the driver's global value for device loss timeout plus - * five seconds to allow the driver's nodev timer to run. - */ - rport->dev_loss_tmo = lpfc_nodev_tmo + 5; -} - -static void lpfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout) { - /* - * The driver doesn't have a per-target timeout setting. Set - * this value globally. lpfc_nodev_tmo should be greater then 0. - */ if (timeout) - lpfc_nodev_tmo = timeout; + rport->dev_loss_tmo = timeout; else - lpfc_nodev_tmo = 1; - rport->dev_loss_tmo = lpfc_nodev_tmo + 5; + rport->dev_loss_tmo = 1; } @@ -1391,7 +1709,6 @@ struct fc_function_template lpfc_transport_functions = { .show_host_port_name = 1, .show_host_supported_classes = 1, .show_host_supported_fc4s = 1, - .show_host_symbolic_name = 1, .show_host_supported_speeds = 1, .show_host_maxframe_size = 1, @@ -1414,20 +1731,21 @@ struct fc_function_template lpfc_transport_functions = { .get_host_fabric_name = lpfc_get_host_fabric_name, .show_host_fabric_name = 1, + .get_host_symbolic_name = lpfc_get_host_symbolic_name, + .show_host_symbolic_name = 1, + /* * The LPFC driver treats linkdown handling as target loss events * so there are no sysfs handlers for link_down_tmo. */ .get_fc_host_stats = lpfc_get_stats, - - /* the LPFC driver doesn't support resetting stats yet */ + .reset_fc_host_stats = lpfc_reset_stats, .dd_fcrport_size = sizeof(struct lpfc_rport_data), .show_rport_maxframe_size = 1, .show_rport_supported_classes = 1, - .get_rport_dev_loss_tmo = lpfc_get_rport_loss_tmo, .set_rport_dev_loss_tmo = lpfc_set_rport_loss_tmo, .show_rport_dev_loss_tmo = 1, @@ -1441,6 +1759,8 @@ struct fc_function_template lpfc_transport_functions = { .show_starget_port_name = 1, .issue_fc_host_lip = lpfc_issue_lip, + .dev_loss_tmo_callbk = lpfc_dev_loss_tmo_callbk, + .terminate_rport_io = lpfc_terminate_rport_io, }; void @@ -1456,14 +1776,15 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) lpfc_ack0_init(phba, lpfc_ack0); lpfc_topology_init(phba, lpfc_topology); lpfc_scan_down_init(phba, lpfc_scan_down); - lpfc_nodev_tmo_init(phba, lpfc_nodev_tmo); lpfc_link_speed_init(phba, lpfc_link_speed); lpfc_fdmi_on_init(phba, lpfc_fdmi_on); lpfc_discovery_threads_init(phba, lpfc_discovery_threads); lpfc_max_luns_init(phba, lpfc_max_luns); lpfc_poll_tmo_init(phba, lpfc_poll_tmo); - + lpfc_devloss_tmo_init(phba, lpfc_devloss_tmo); + lpfc_nodev_tmo_init(phba, lpfc_nodev_tmo); phba->cfg_poll = lpfc_poll; + phba->cfg_soft_wwpn = 0L; /* * The total number of segments is the configuration value plus 2 diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index ee22173fce4..3d684496acd 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -18,6 +18,7 @@ * included with this package. * *******************************************************************/ +struct fc_rport; void lpfc_dump_mem(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t); void lpfc_read_nv(struct lpfc_hba *, LPFC_MBOXQ_t *); int lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, @@ -127,6 +128,7 @@ void lpfc_config_port(struct lpfc_hba *, LPFC_MBOXQ_t *); void lpfc_kill_board(struct lpfc_hba *, LPFC_MBOXQ_t *); void lpfc_mbox_put(struct lpfc_hba *, LPFC_MBOXQ_t *); LPFC_MBOXQ_t *lpfc_mbox_get(struct lpfc_hba *); +int lpfc_mbox_tmo_val(struct lpfc_hba *, int); int lpfc_mem_alloc(struct lpfc_hba *); void lpfc_mem_free(struct lpfc_hba *); @@ -147,6 +149,7 @@ int lpfc_sli_hba_setup(struct lpfc_hba *); int lpfc_sli_hba_down(struct lpfc_hba *); int lpfc_sli_issue_mbox(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t); int lpfc_sli_handle_mb_event(struct lpfc_hba *); +int lpfc_sli_flush_mbox_queue(struct lpfc_hba *); int lpfc_sli_handle_slow_ring_event(struct lpfc_hba *, struct lpfc_sli_ring *, uint32_t); void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *); @@ -198,6 +201,8 @@ extern struct scsi_host_template lpfc_template; extern struct fc_function_template lpfc_transport_functions; void lpfc_get_hba_sym_node_name(struct lpfc_hba * phba, uint8_t * symbp); +void lpfc_terminate_rport_io(struct fc_rport *); +void lpfc_dev_loss_tmo_callbk(struct fc_rport *rport); #define ScsiResult(host_code, scsi_code) (((host_code) << 16) | scsi_code) #define HBA_EVENT_RSCN 5 diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index b65ee57af53..ae410645899 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -131,6 +131,7 @@ lpfc_ct_unsol_event(struct lpfc_hba * phba, } ct_unsol_event_exit_piocbq: + list_del(&head); if (pmbuf) { list_for_each_entry_safe(matp, next_matp, &pmbuf->list, list) { lpfc_mbuf_free(phba, matp->virt, matp->phys); @@ -323,7 +324,6 @@ lpfc_ns_rsp(struct lpfc_hba * phba, struct lpfc_dmabuf * mp, uint32_t Size) struct lpfc_sli_ct_request *Response = (struct lpfc_sli_ct_request *) mp->virt; struct lpfc_nodelist *ndlp = NULL; - struct lpfc_nodelist *next_ndlp; struct lpfc_dmabuf *mlast, *next_mp; uint32_t *ctptr = (uint32_t *) & Response->un.gid.PortType; uint32_t Did; @@ -398,30 +398,6 @@ nsout1: * current driver state. */ if (phba->hba_state == LPFC_HBA_READY) { - - /* - * Switch ports that connect a loop of multiple targets need - * special consideration. The driver wants to unregister the - * rpi only on the target that was pulled from the loop. On - * RSCN, the driver wants to rediscover an NPort only if the - * driver flagged it as NLP_NPR_2B_DISC. Provided adisc is - * not enabled and the NPort is not capable of retransmissions - * (FC Tape) prevent timing races with the scsi error handler by - * unregistering the Nport's RPI. This action causes all - * outstanding IO to flush back to the midlayer. - */ - list_for_each_entry_safe(ndlp, next_ndlp, &phba->fc_npr_list, - nlp_listp) { - if (!(ndlp->nlp_flag & NLP_NPR_2B_DISC) && - (lpfc_rscn_payload_check(phba, ndlp->nlp_DID))) { - if ((phba->cfg_use_adisc == 0) && - !(ndlp->nlp_fcp_info & - NLP_FCP_2_DEVICE)) { - lpfc_unreg_rpi(phba, ndlp); - ndlp->nlp_flag &= ~NLP_NPR_ADISC; - } - } - } lpfc_els_flush_rscn(phba); spin_lock_irq(phba->host->host_lock); phba->fc_flag |= FC_RSCN_MODE; /* we are still in RSCN mode */ @@ -481,7 +457,7 @@ lpfc_cmpl_ct_cmd_gid_ft(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, if (CTrsp->CommandResponse.bits.CmdRsp == be16_to_cpu(SLI_CT_RESPONSE_FS_ACC)) { lpfc_printf_log(phba, KERN_INFO, LOG_DISCOVERY, - "%d:0239 NameServer Rsp " + "%d:0208 NameServer Rsp " "Data: x%x\n", phba->brd_no, phba->fc_flag); @@ -588,13 +564,9 @@ lpfc_get_hba_sym_node_name(struct lpfc_hba * phba, uint8_t * symbp) lpfc_decode_firmware_rev(phba, fwrev, 0); - if (phba->Port[0]) { - sprintf(symbp, "Emulex %s Port %s FV%s DV%s", phba->ModelName, - phba->Port, fwrev, lpfc_release_version); - } else { - sprintf(symbp, "Emulex %s FV%s DV%s", phba->ModelName, - fwrev, lpfc_release_version); - } + sprintf(symbp, "Emulex %s FV%s DV%s", phba->ModelName, + fwrev, lpfc_release_version); + return; } /* diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h index 41cf5d3ea6c..9766f909c9c 100644 --- a/drivers/scsi/lpfc/lpfc_disc.h +++ b/drivers/scsi/lpfc/lpfc_disc.h @@ -30,7 +30,6 @@ /* worker thread events */ enum lpfc_work_type { - LPFC_EVT_NODEV_TMO, LPFC_EVT_ONLINE, LPFC_EVT_OFFLINE, LPFC_EVT_WARM_START, @@ -74,11 +73,9 @@ struct lpfc_nodelist { #define NLP_FCP_2_DEVICE 0x10 /* FCP-2 device */ struct timer_list nlp_delayfunc; /* Used for delayed ELS cmds */ - struct timer_list nlp_tmofunc; /* Used for nodev tmo */ struct fc_rport *rport; /* Corresponding FC transport port structure */ struct lpfc_hba *nlp_phba; - struct lpfc_work_evt nodev_timeout_evt; struct lpfc_work_evt els_retry_evt; unsigned long last_ramp_up_time; /* jiffy of last ramp up */ unsigned long last_q_full_time; /* jiffy of last queue full */ @@ -102,7 +99,6 @@ struct lpfc_nodelist { #define NLP_LOGO_SND 0x100 /* sent LOGO request for this entry */ #define NLP_RNID_SND 0x400 /* sent RNID request for this entry */ #define NLP_ELS_SND_MASK 0x7e0 /* sent ELS request for this entry */ -#define NLP_NODEV_TMO 0x10000 /* nodev timeout is running for node */ #define NLP_DELAY_TMO 0x20000 /* delay timeout is running for node */ #define NLP_NPR_2B_DISC 0x40000 /* node is included in num_disc_nodes */ #define NLP_RCV_PLOGI 0x80000 /* Rcv'ed PLOGI from remote system */ @@ -169,7 +165,7 @@ struct lpfc_nodelist { */ /* * For a Link Down, all nodes on the ADISC, PLOGI, unmapped or mapped - * lists will receive a DEVICE_RECOVERY event. If the linkdown or nodev timers + * lists will receive a DEVICE_RECOVERY event. If the linkdown or devloss timers * expire, all effected nodes will receive a DEVICE_RM event. */ /* diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 283b7d824c3..71864cdc6c7 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -648,33 +648,32 @@ lpfc_more_plogi(struct lpfc_hba * phba) } static struct lpfc_nodelist * -lpfc_plogi_confirm_nport(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, +lpfc_plogi_confirm_nport(struct lpfc_hba * phba, struct lpfc_dmabuf *prsp, struct lpfc_nodelist *ndlp) { struct lpfc_nodelist *new_ndlp; - struct lpfc_dmabuf *pcmd, *prsp; uint32_t *lp; struct serv_parm *sp; uint8_t name[sizeof (struct lpfc_name)]; uint32_t rc; - pcmd = (struct lpfc_dmabuf *) cmdiocb->context2; - prsp = (struct lpfc_dmabuf *) pcmd->list.next; lp = (uint32_t *) prsp->virt; sp = (struct serv_parm *) ((uint8_t *) lp + sizeof (uint32_t)); + memset(name, 0, sizeof (struct lpfc_name)); /* Now we to find out if the NPort we are logging into, matches the WWPN * we have for that ndlp. If not, we have some work to do. */ new_ndlp = lpfc_findnode_wwpn(phba, NLP_SEARCH_ALL, &sp->portName); - memset(name, 0, sizeof (struct lpfc_name)); - rc = memcmp(&ndlp->nlp_portname, name, sizeof(struct lpfc_name)); - if (!rc || (new_ndlp == ndlp)) { + if (new_ndlp == ndlp) return ndlp; - } if (!new_ndlp) { + rc = + memcmp(&ndlp->nlp_portname, name, sizeof(struct lpfc_name)); + if (!rc) + return ndlp; new_ndlp = mempool_alloc(phba->nlp_mem_pool, GFP_ATOMIC); if (!new_ndlp) return ndlp; @@ -683,17 +682,21 @@ lpfc_plogi_confirm_nport(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, } lpfc_unreg_rpi(phba, new_ndlp); - new_ndlp->nlp_prev_state = ndlp->nlp_state; new_ndlp->nlp_DID = ndlp->nlp_DID; - new_ndlp->nlp_state = NLP_STE_PLOGI_ISSUE; - lpfc_nlp_list(phba, new_ndlp, NLP_PLOGI_LIST); + new_ndlp->nlp_prev_state = ndlp->nlp_prev_state; + new_ndlp->nlp_state = ndlp->nlp_state; + lpfc_nlp_list(phba, new_ndlp, ndlp->nlp_flag & NLP_LIST_MASK); /* Move this back to NPR list */ - lpfc_unreg_rpi(phba, ndlp); - ndlp->nlp_DID = 0; /* Two ndlps cannot have the same did */ - ndlp->nlp_state = NLP_STE_NPR_NODE; - lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST); - + if (memcmp(&ndlp->nlp_portname, name, sizeof(struct lpfc_name)) == 0) { + lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); + } + else { + lpfc_unreg_rpi(phba, ndlp); + ndlp->nlp_DID = 0; /* Two ndlps cannot have the same did */ + ndlp->nlp_state = NLP_STE_NPR_NODE; + lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST); + } return new_ndlp; } @@ -703,6 +706,7 @@ lpfc_cmpl_els_plogi(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, { IOCB_t *irsp; struct lpfc_nodelist *ndlp; + struct lpfc_dmabuf *prsp; int disc, rc, did, type; @@ -769,7 +773,10 @@ lpfc_cmpl_els_plogi(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, } } else { /* Good status, call state machine */ - ndlp = lpfc_plogi_confirm_nport(phba, cmdiocb, ndlp); + prsp = list_entry(((struct lpfc_dmabuf *) + cmdiocb->context2)->list.next, + struct lpfc_dmabuf, list); + ndlp = lpfc_plogi_confirm_nport(phba, prsp, ndlp); rc = lpfc_disc_state_machine(phba, ndlp, cmdiocb, NLP_EVT_CMPL_PLOGI); } @@ -821,7 +828,7 @@ lpfc_issue_els_plogi(struct lpfc_hba * phba, uint32_t did, uint8_t retry) pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */ cmdsize = (sizeof (uint32_t) + sizeof (struct serv_parm)); - elsiocb = lpfc_prep_els_iocb(phba, 1, cmdsize, retry, 0, did, + elsiocb = lpfc_prep_els_iocb(phba, 1, cmdsize, retry, NULL, did, ELS_CMD_PLOGI); if (!elsiocb) return 1; @@ -1841,9 +1848,12 @@ static void lpfc_cmpl_els_acc(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, struct lpfc_iocbq * rspiocb) { + IOCB_t *irsp; struct lpfc_nodelist *ndlp; LPFC_MBOXQ_t *mbox = NULL; + irsp = &rspiocb->iocb; + ndlp = (struct lpfc_nodelist *) cmdiocb->context1; if (cmdiocb->context_un.mbox) mbox = cmdiocb->context_un.mbox; @@ -1886,9 +1896,15 @@ lpfc_cmpl_els_acc(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, mempool_free( mbox, phba->mbox_mem_pool); } else { mempool_free( mbox, phba->mbox_mem_pool); - if (ndlp->nlp_flag & NLP_ACC_REGLOGIN) { - lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); - ndlp = NULL; + /* Do not call NO_LIST for lpfc_els_abort'ed ELS cmds */ + if (!((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) && + ((irsp->un.ulpWord[4] == IOERR_SLI_ABORTED) || + (irsp->un.ulpWord[4] == IOERR_LINK_DOWN) || + (irsp->un.ulpWord[4] == IOERR_SLI_DOWN)))) { + if (ndlp->nlp_flag & NLP_ACC_REGLOGIN) { + lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); + ndlp = NULL; + } } } } @@ -2490,6 +2506,7 @@ lpfc_els_rcv_rscn(struct lpfc_hba * phba, uint32_t *lp; IOCB_t *icmd; uint32_t payload_len, cmd; + int i; icmd = &cmdiocb->iocb; pcmd = (struct lpfc_dmabuf *) cmdiocb->context2; @@ -2508,6 +2525,10 @@ lpfc_els_rcv_rscn(struct lpfc_hba * phba, phba->brd_no, phba->fc_flag, payload_len, *lp, phba->fc_rscn_id_cnt); + for (i = 0; i < payload_len/sizeof(uint32_t); i++) + fc_host_post_event(phba->host, fc_get_event_number(), + FCH_EVT_RSCN, lp[i]); + /* If we are about to begin discovery, just ACC the RSCN. * Discovery processing will satisfy it. */ @@ -2791,8 +2812,8 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) ndlp = (struct lpfc_nodelist *) pmb->context2; xri = (uint16_t) ((unsigned long)(pmb->context1)); - pmb->context1 = 0; - pmb->context2 = 0; + pmb->context1 = NULL; + pmb->context2 = NULL; if (mb->mbxStatus) { mempool_free( pmb, phba->mbox_mem_pool); @@ -2832,7 +2853,7 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) /* Xmit ELS RPS ACC response tag <ulpIoTag> */ lpfc_printf_log(phba, KERN_INFO, LOG_ELS, - "%d:0128 Xmit ELS RPS ACC response tag x%x " + "%d:0118 Xmit ELS RPS ACC response tag x%x " "Data: x%x x%x x%x x%x x%x\n", phba->brd_no, elsiocb->iocb.ulpIoTag, @@ -2941,7 +2962,7 @@ lpfc_els_rsp_rpl_acc(struct lpfc_hba * phba, uint16_t cmdsize, /* Xmit ELS RPL ACC response tag <ulpIoTag> */ lpfc_printf_log(phba, KERN_INFO, LOG_ELS, - "%d:0128 Xmit ELS RPL ACC response tag x%x " + "%d:0120 Xmit ELS RPL ACC response tag x%x " "Data: x%x x%x x%x x%x x%x\n", phba->brd_no, elsiocb->iocb.ulpIoTag, @@ -3102,7 +3123,7 @@ lpfc_els_rcv_fan(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, struct lpfc_nodelist *ndlp, *next_ndlp; /* FAN received */ - lpfc_printf_log(phba, KERN_INFO, LOG_ELS, "%d:265 FAN received\n", + lpfc_printf_log(phba, KERN_INFO, LOG_ELS, "%d:0265 FAN received\n", phba->brd_no); icmd = &cmdiocb->iocb; @@ -3282,10 +3303,9 @@ lpfc_els_timeout_handler(struct lpfc_hba *phba) } else lpfc_sli_release_iocbq(phba, piocb); } - if (phba->sli.ring[LPFC_ELS_RING].txcmplq_cnt) { - phba->els_tmofunc.expires = jiffies + HZ * timeout; - add_timer(&phba->els_tmofunc); - } + if (phba->sli.ring[LPFC_ELS_RING].txcmplq_cnt) + mod_timer(&phba->els_tmofunc, jiffies + HZ * timeout); + spin_unlock_irq(phba->host->host_lock); } @@ -3442,6 +3462,8 @@ lpfc_els_unsol_event(struct lpfc_hba * phba, if ((did & Fabric_DID_MASK) == Fabric_DID_MASK) { ndlp->nlp_type |= NLP_FABRIC; } + ndlp->nlp_state = NLP_STE_UNUSED_NODE; + lpfc_nlp_list(phba, ndlp, NLP_UNUSED_LIST); } phba->fc_stat.elsRcvFrame++; @@ -3463,13 +3485,14 @@ lpfc_els_unsol_event(struct lpfc_hba * phba, rjt_err = 1; break; } + ndlp = lpfc_plogi_confirm_nport(phba, mp, ndlp); lpfc_disc_state_machine(phba, ndlp, elsiocb, NLP_EVT_RCV_PLOGI); break; case ELS_CMD_FLOGI: phba->fc_stat.elsRcvFLOGI++; lpfc_els_rcv_flogi(phba, elsiocb, ndlp, newnode); if (newnode) { - mempool_free( ndlp, phba->nlp_mem_pool); + lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); } break; case ELS_CMD_LOGO: @@ -3492,7 +3515,7 @@ lpfc_els_unsol_event(struct lpfc_hba * phba, phba->fc_stat.elsRcvRSCN++; lpfc_els_rcv_rscn(phba, elsiocb, ndlp, newnode); if (newnode) { - mempool_free( ndlp, phba->nlp_mem_pool); + lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); } break; case ELS_CMD_ADISC: @@ -3535,28 +3558,28 @@ lpfc_els_unsol_event(struct lpfc_hba * phba, phba->fc_stat.elsRcvLIRR++; lpfc_els_rcv_lirr(phba, elsiocb, ndlp); if (newnode) { - mempool_free( ndlp, phba->nlp_mem_pool); + lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); } break; case ELS_CMD_RPS: phba->fc_stat.elsRcvRPS++; lpfc_els_rcv_rps(phba, elsiocb, ndlp); if (newnode) { - mempool_free( ndlp, phba->nlp_mem_pool); + lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); } break; case ELS_CMD_RPL: phba->fc_stat.elsRcvRPL++; lpfc_els_rcv_rpl(phba, elsiocb, ndlp); if (newnode) { - mempool_free( ndlp, phba->nlp_mem_pool); + lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); } break; case ELS_CMD_RNID: phba->fc_stat.elsRcvRNID++; lpfc_els_rcv_rnid(phba, elsiocb, ndlp); if (newnode) { - mempool_free( ndlp, phba->nlp_mem_pool); + lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); } break; default: @@ -3568,7 +3591,7 @@ lpfc_els_unsol_event(struct lpfc_hba * phba, "%d:0115 Unknown ELS command x%x received from " "NPORT x%x\n", phba->brd_no, cmd, did); if (newnode) { - mempool_free( ndlp, phba->nlp_mem_pool); + lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); } break; } diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index adb086009ae..d586c3d3b0d 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -56,28 +56,63 @@ static uint8_t lpfcAlpaArray[] = { static void lpfc_disc_timeout_handler(struct lpfc_hba *); -static void -lpfc_process_nodev_timeout(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) +void +lpfc_terminate_rport_io(struct fc_rport *rport) { - uint8_t *name = (uint8_t *)&ndlp->nlp_portname; - int warn_on = 0; + struct lpfc_rport_data *rdata; + struct lpfc_nodelist * ndlp; + struct lpfc_hba *phba; - spin_lock_irq(phba->host->host_lock); - if (!(ndlp->nlp_flag & NLP_NODEV_TMO)) { - spin_unlock_irq(phba->host->host_lock); + rdata = rport->dd_data; + ndlp = rdata->pnode; + + if (!ndlp) { + if (rport->roles & FC_RPORT_ROLE_FCP_TARGET) + printk(KERN_ERR "Cannot find remote node" + " to terminate I/O Data x%x\n", + rport->port_id); return; } - /* - * If a discovery event readded nodev_timer after timer - * firing and before processing the timer, cancel the - * nlp_tmofunc. - */ - spin_unlock_irq(phba->host->host_lock); - del_timer_sync(&ndlp->nlp_tmofunc); + phba = ndlp->nlp_phba; + spin_lock_irq(phba->host->host_lock); + if (ndlp->nlp_sid != NLP_NO_SID) { + lpfc_sli_abort_iocb(phba, &phba->sli.ring[phba->sli.fcp_ring], + ndlp->nlp_sid, 0, 0, LPFC_CTX_TGT); + } + spin_unlock_irq(phba->host->host_lock); - ndlp->nlp_flag &= ~NLP_NODEV_TMO; + return; +} + +/* + * This function will be called when dev_loss_tmo fire. + */ +void +lpfc_dev_loss_tmo_callbk(struct fc_rport *rport) +{ + struct lpfc_rport_data *rdata; + struct lpfc_nodelist * ndlp; + uint8_t *name; + int warn_on = 0; + struct lpfc_hba *phba; + + rdata = rport->dd_data; + ndlp = rdata->pnode; + + if (!ndlp) { + if (rport->roles & FC_RPORT_ROLE_FCP_TARGET) + printk(KERN_ERR "Cannot find remote node" + " for rport in dev_loss_tmo_callbk x%x\n", + rport->port_id); + return; + } + + name = (uint8_t *)&ndlp->nlp_portname; + phba = ndlp->nlp_phba; + + spin_lock_irq(phba->host->host_lock); if (ndlp->nlp_sid != NLP_NO_SID) { warn_on = 1; @@ -85,11 +120,14 @@ lpfc_process_nodev_timeout(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) lpfc_sli_abort_iocb(phba, &phba->sli.ring[phba->sli.fcp_ring], ndlp->nlp_sid, 0, 0, LPFC_CTX_TGT); } + if (phba->fc_flag & FC_UNLOADING) + warn_on = 0; + spin_unlock_irq(phba->host->host_lock); if (warn_on) { lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY, - "%d:0203 Nodev timeout on " + "%d:0203 Devloss timeout on " "WWPN %x:%x:%x:%x:%x:%x:%x:%x " "NPort x%x Data: x%x x%x x%x\n", phba->brd_no, @@ -99,7 +137,7 @@ lpfc_process_nodev_timeout(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) ndlp->nlp_state, ndlp->nlp_rpi); } else { lpfc_printf_log(phba, KERN_INFO, LOG_DISCOVERY, - "%d:0204 Nodev timeout on " + "%d:0204 Devloss timeout on " "WWPN %x:%x:%x:%x:%x:%x:%x:%x " "NPort x%x Data: x%x x%x x%x\n", phba->brd_no, @@ -109,7 +147,12 @@ lpfc_process_nodev_timeout(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) ndlp->nlp_state, ndlp->nlp_rpi); } - lpfc_disc_state_machine(phba, ndlp, NULL, NLP_EVT_DEVICE_RM); + ndlp->rport = NULL; + rdata->pnode = NULL; + + if (!(phba->fc_flag & FC_UNLOADING)) + lpfc_disc_state_machine(phba, ndlp, NULL, NLP_EVT_DEVICE_RM); + return; } @@ -127,11 +170,6 @@ lpfc_work_list_done(struct lpfc_hba * phba) spin_unlock_irq(phba->host->host_lock); free_evt = 1; switch (evtp->evt) { - case LPFC_EVT_NODEV_TMO: - ndlp = (struct lpfc_nodelist *)(evtp->evt_arg1); - lpfc_process_nodev_timeout(phba, ndlp); - free_evt = 0; - break; case LPFC_EVT_ELS_RETRY: ndlp = (struct lpfc_nodelist *)(evtp->evt_arg1); lpfc_els_retry_delay_handler(ndlp); @@ -340,6 +378,9 @@ lpfc_linkdown(struct lpfc_hba * phba) spin_unlock_irq(phba->host->host_lock); } + fc_host_post_event(phba->host, fc_get_event_number(), + FCH_EVT_LINKDOWN, 0); + /* Clean up any firmware default rpi's */ if ((mb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL))) { lpfc_unreg_did(phba, 0xffffffff, mb); @@ -374,16 +415,6 @@ lpfc_linkdown(struct lpfc_hba * phba) rc = lpfc_disc_state_machine(phba, ndlp, NULL, NLP_EVT_DEVICE_RECOVERY); - /* Check config parameter use-adisc or FCP-2 */ - if ((rc != NLP_STE_FREED_NODE) && - (phba->cfg_use_adisc == 0) && - !(ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE)) { - /* We know we will have to relogin, so - * unreglogin the rpi right now to fail - * any outstanding I/Os quickly. - */ - lpfc_unreg_rpi(phba, ndlp); - } } } @@ -427,6 +458,9 @@ lpfc_linkup(struct lpfc_hba * phba) struct list_head *listp, *node_list[7]; int i; + fc_host_post_event(phba->host, fc_get_event_number(), + FCH_EVT_LINKUP, 0); + spin_lock_irq(phba->host->host_lock); phba->hba_state = LPFC_LINK_UP; phba->fc_flag &= ~(FC_PT2PT | FC_PT2PT_PLOGI | FC_ABORT_DISCOVERY | @@ -638,6 +672,8 @@ lpfc_mbx_cmpl_read_sparam(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) memcpy((uint8_t *) & phba->fc_sparam, (uint8_t *) mp->virt, sizeof (struct serv_parm)); + if (phba->cfg_soft_wwpn) + u64_to_wwn(phba->cfg_soft_wwpn, phba->fc_sparam.portName.u.wwn); memcpy((uint8_t *) & phba->fc_nodename, (uint8_t *) & phba->fc_sparam.nodeName, sizeof (struct lpfc_name)); @@ -1084,7 +1120,7 @@ lpfc_register_remote_port(struct lpfc_hba * phba, fc_remote_port_rolechg(rport, rport_ids.roles); if ((rport->scsi_target_id != -1) && - (rport->scsi_target_id < MAX_FCP_TARGET)) { + (rport->scsi_target_id < LPFC_MAX_TARGET)) { ndlp->nlp_sid = rport->scsi_target_id; } @@ -1098,8 +1134,11 @@ lpfc_unregister_remote_port(struct lpfc_hba * phba, struct fc_rport *rport = ndlp->rport; struct lpfc_rport_data *rdata = rport->dd_data; - ndlp->rport = NULL; - rdata->pnode = NULL; + if (rport->scsi_target_id == -1) { + ndlp->rport = NULL; + rdata->pnode = NULL; + } + fc_remote_port_delete(rport); return; @@ -1227,17 +1266,6 @@ lpfc_nlp_list(struct lpfc_hba * phba, struct lpfc_nodelist * nlp, int list) list_add_tail(&nlp->nlp_listp, &phba->fc_nlpunmap_list); phba->fc_unmap_cnt++; phba->nport_event_cnt++; - /* stop nodev tmo if running */ - if (nlp->nlp_flag & NLP_NODEV_TMO) { - nlp->nlp_flag &= ~NLP_NODEV_TMO; - spin_unlock_irq(phba->host->host_lock); - del_timer_sync(&nlp->nlp_tmofunc); - spin_lock_irq(phba->host->host_lock); - if (!list_empty(&nlp->nodev_timeout_evt.evt_listp)) - list_del_init(&nlp->nodev_timeout_evt. - evt_listp); - - } nlp->nlp_flag &= ~NLP_NODEV_REMOVE; nlp->nlp_type |= NLP_FC_NODE; break; @@ -1248,17 +1276,6 @@ lpfc_nlp_list(struct lpfc_hba * phba, struct lpfc_nodelist * nlp, int list) list_add_tail(&nlp->nlp_listp, &phba->fc_nlpmap_list); phba->fc_map_cnt++; phba->nport_event_cnt++; - /* stop nodev tmo if running */ - if (nlp->nlp_flag & NLP_NODEV_TMO) { - nlp->nlp_flag &= ~NLP_NODEV_TMO; - spin_unlock_irq(phba->host->host_lock); - del_timer_sync(&nlp->nlp_tmofunc); - spin_lock_irq(phba->host->host_lock); - if (!list_empty(&nlp->nodev_timeout_evt.evt_listp)) - list_del_init(&nlp->nodev_timeout_evt. - evt_listp); - - } nlp->nlp_flag &= ~NLP_NODEV_REMOVE; break; case NLP_NPR_LIST: @@ -1267,11 +1284,6 @@ lpfc_nlp_list(struct lpfc_hba * phba, struct lpfc_nodelist * nlp, int list) list_add_tail(&nlp->nlp_listp, &phba->fc_npr_list); phba->fc_npr_cnt++; - if (!(nlp->nlp_flag & NLP_NODEV_TMO)) - mod_timer(&nlp->nlp_tmofunc, - jiffies + HZ * phba->cfg_nodev_tmo); - - nlp->nlp_flag |= NLP_NODEV_TMO; nlp->nlp_flag &= ~NLP_RCV_PLOGI; break; case NLP_JUST_DQ: @@ -1301,7 +1313,8 @@ lpfc_nlp_list(struct lpfc_hba * phba, struct lpfc_nodelist * nlp, int list) * already. If we have, and it's a scsi entity, be * sure to unblock any attached scsi devices */ - if (!nlp->rport) + if ((!nlp->rport) || (nlp->rport->port_state == + FC_PORTSTATE_BLOCKED)) lpfc_register_remote_port(phba, nlp); /* @@ -1313,7 +1326,7 @@ lpfc_nlp_list(struct lpfc_hba * phba, struct lpfc_nodelist * nlp, int list) if ((rport_add == mapped) && ((!nlp->rport) || (nlp->rport->scsi_target_id == -1) || - (nlp->rport->scsi_target_id >= MAX_FCP_TARGET))) { + (nlp->rport->scsi_target_id >= LPFC_MAX_TARGET))) { nlp->nlp_state = NLP_STE_UNMAPPED_NODE; spin_lock_irq(phba->host->host_lock); nlp->nlp_flag |= NLP_TGT_NO_SCSIID; @@ -1557,6 +1570,8 @@ lpfc_freenode(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp) mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; } } + + spin_lock_irq(phba->host->host_lock); list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) { if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) && (ndlp == (struct lpfc_nodelist *) mb->context2)) { @@ -1569,18 +1584,16 @@ lpfc_freenode(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp) mempool_free(mb, phba->mbox_mem_pool); } } + spin_unlock_irq(phba->host->host_lock); lpfc_els_abort(phba,ndlp,0); spin_lock_irq(phba->host->host_lock); - ndlp->nlp_flag &= ~(NLP_NODEV_TMO|NLP_DELAY_TMO); + ndlp->nlp_flag &= ~NLP_DELAY_TMO; spin_unlock_irq(phba->host->host_lock); - del_timer_sync(&ndlp->nlp_tmofunc); ndlp->nlp_last_elscmd = 0; del_timer_sync(&ndlp->nlp_delayfunc); - if (!list_empty(&ndlp->nodev_timeout_evt.evt_listp)) - list_del_init(&ndlp->nodev_timeout_evt.evt_listp); if (!list_empty(&ndlp->els_retry_evt.evt_listp)) list_del_init(&ndlp->els_retry_evt.evt_listp); @@ -1597,16 +1610,6 @@ lpfc_freenode(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp) int lpfc_nlp_remove(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp) { - if (ndlp->nlp_flag & NLP_NODEV_TMO) { - spin_lock_irq(phba->host->host_lock); - ndlp->nlp_flag &= ~NLP_NODEV_TMO; - spin_unlock_irq(phba->host->host_lock); - del_timer_sync(&ndlp->nlp_tmofunc); - if (!list_empty(&ndlp->nodev_timeout_evt.evt_listp)) - list_del_init(&ndlp->nodev_timeout_evt.evt_listp); - - } - if (ndlp->nlp_flag & NLP_DELAY_TMO) { lpfc_cancel_retry_delay_tmo(phba, ndlp); @@ -1782,7 +1785,7 @@ lpfc_findnode_did(struct lpfc_hba * phba, uint32_t order, uint32_t did) /* LOG change to REGLOGIN */ /* FIND node DID reglogin */ lpfc_printf_log(phba, KERN_INFO, LOG_NODE, - "%d:0931 FIND node DID reglogin" + "%d:0901 FIND node DID reglogin" " Data: x%p x%x x%x x%x\n", phba->brd_no, ndlp, ndlp->nlp_DID, @@ -1805,7 +1808,7 @@ lpfc_findnode_did(struct lpfc_hba * phba, uint32_t order, uint32_t did) /* LOG change to PRLI */ /* FIND node DID prli */ lpfc_printf_log(phba, KERN_INFO, LOG_NODE, - "%d:0931 FIND node DID prli " + "%d:0902 FIND node DID prli " "Data: x%p x%x x%x x%x\n", phba->brd_no, ndlp, ndlp->nlp_DID, @@ -1828,7 +1831,7 @@ lpfc_findnode_did(struct lpfc_hba * phba, uint32_t order, uint32_t did) /* LOG change to NPR */ /* FIND node DID npr */ lpfc_printf_log(phba, KERN_INFO, LOG_NODE, - "%d:0931 FIND node DID npr " + "%d:0903 FIND node DID npr " "Data: x%p x%x x%x x%x\n", phba->brd_no, ndlp, ndlp->nlp_DID, @@ -1851,7 +1854,7 @@ lpfc_findnode_did(struct lpfc_hba * phba, uint32_t order, uint32_t did) /* LOG change to UNUSED */ /* FIND node DID unused */ lpfc_printf_log(phba, KERN_INFO, LOG_NODE, - "%d:0931 FIND node DID unused " + "%d:0905 FIND node DID unused " "Data: x%p x%x x%x x%x\n", phba->brd_no, ndlp, ndlp->nlp_DID, @@ -2335,7 +2338,7 @@ lpfc_disc_timeout_handler(struct lpfc_hba *phba) initlinkmbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!initlinkmbox) { lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY, - "%d:0226 Device Discovery " + "%d:0206 Device Discovery " "completion error\n", phba->brd_no); phba->hba_state = LPFC_HBA_ERROR; @@ -2365,7 +2368,7 @@ lpfc_disc_timeout_handler(struct lpfc_hba *phba) if (!clearlambox) { clrlaerr = 1; lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY, - "%d:0226 Device Discovery " + "%d:0207 Device Discovery " "completion error\n", phba->brd_no); phba->hba_state = LPFC_HBA_ERROR; @@ -2421,34 +2424,6 @@ lpfc_disc_timeout_handler(struct lpfc_hba *phba) return; } -static void -lpfc_nodev_timeout(unsigned long ptr) -{ - struct lpfc_hba *phba; - struct lpfc_nodelist *ndlp; - unsigned long iflag; - struct lpfc_work_evt *evtp; - - ndlp = (struct lpfc_nodelist *)ptr; - phba = ndlp->nlp_phba; - evtp = &ndlp->nodev_timeout_evt; - spin_lock_irqsave(phba->host->host_lock, iflag); - - if (!list_empty(&evtp->evt_listp)) { - spin_unlock_irqrestore(phba->host->host_lock, iflag); - return; - } - evtp->evt_arg1 = ndlp; - evtp->evt = LPFC_EVT_NODEV_TMO; - list_add_tail(&evtp->evt_listp, &phba->work_list); - if (phba->work_wait) - wake_up(phba->work_wait); - - spin_unlock_irqrestore(phba->host->host_lock, iflag); - return; -} - - /* * This routine handles processing a NameServer REG_LOGIN mailbox * command upon completion. It is setup in the LPFC_MBOXQ @@ -2572,11 +2547,7 @@ lpfc_nlp_init(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp, uint32_t did) { memset(ndlp, 0, sizeof (struct lpfc_nodelist)); - INIT_LIST_HEAD(&ndlp->nodev_timeout_evt.evt_listp); INIT_LIST_HEAD(&ndlp->els_retry_evt.evt_listp); - init_timer(&ndlp->nlp_tmofunc); - ndlp->nlp_tmofunc.function = lpfc_nodev_timeout; - ndlp->nlp_tmofunc.data = (unsigned long)ndlp; init_timer(&ndlp->nlp_delayfunc); ndlp->nlp_delayfunc.function = lpfc_els_retry_delay; ndlp->nlp_delayfunc.data = (unsigned long)ndlp; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 908d0f27706..4cdf3464267 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -71,6 +71,7 @@ lpfc_config_port_prep(struct lpfc_hba * phba) uint16_t offset = 0; static char licensed[56] = "key unlock for use with gnu public licensed code only\0"; + static int init_key = 1; pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!pmb) { @@ -82,10 +83,13 @@ lpfc_config_port_prep(struct lpfc_hba * phba) phba->hba_state = LPFC_INIT_MBX_CMDS; if (lpfc_is_LC_HBA(phba->pcidev->device)) { - uint32_t *ptext = (uint32_t *) licensed; + if (init_key) { + uint32_t *ptext = (uint32_t *) licensed; - for (i = 0; i < 56; i += sizeof (uint32_t), ptext++) - *ptext = cpu_to_be32(*ptext); + for (i = 0; i < 56; i += sizeof (uint32_t), ptext++) + *ptext = cpu_to_be32(*ptext); + init_key = 0; + } lpfc_read_nv(phba, pmb); memset((char*)mb->un.varRDnvp.rsvd3, 0, @@ -264,6 +268,8 @@ lpfc_config_port_post(struct lpfc_hba * phba) kfree(mp); pmb->context1 = NULL; + if (phba->cfg_soft_wwpn) + u64_to_wwn(phba->cfg_soft_wwpn, phba->fc_sparam.portName.u.wwn); memcpy(&phba->fc_nodename, &phba->fc_sparam.nodeName, sizeof (struct lpfc_name)); memcpy(&phba->fc_portname, &phba->fc_sparam.portName, @@ -405,19 +411,26 @@ lpfc_config_port_post(struct lpfc_hba * phba) } /* MBOX buffer will be freed in mbox compl */ - i = 0; + return (0); +} + +static int +lpfc_discovery_wait(struct lpfc_hba *phba) +{ + int i = 0; + while ((phba->hba_state != LPFC_HBA_READY) || (phba->num_disc_nodes) || (phba->fc_prli_sent) || ((phba->fc_map_cnt == 0) && (i<2)) || - (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE)) { + (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE)) { /* Check every second for 30 retries. */ i++; if (i > 30) { - break; + return -ETIMEDOUT; } if ((i >= 15) && (phba->hba_state <= LPFC_LINK_DOWN)) { /* The link is down. Set linkdown timeout */ - break; + return -ETIMEDOUT; } /* Delay for 1 second to give discovery time to complete. */ @@ -425,12 +438,7 @@ lpfc_config_port_post(struct lpfc_hba * phba) } - /* Since num_disc_nodes keys off of PLOGI, delay a bit to let - * any potential PRLIs to flush thru the SLI sub-system. - */ - msleep(50); - - return (0); + return 0; } /************************************************************************/ @@ -505,6 +513,7 @@ lpfc_handle_eratt(struct lpfc_hba * phba) { struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; + uint32_t event_data; if (phba->work_hs & HS_FFER6) { /* Re-establishing Link */ @@ -549,6 +558,11 @@ lpfc_handle_eratt(struct lpfc_hba * phba) phba->brd_no, phba->work_hs, phba->work_status[0], phba->work_status[1]); + event_data = FC_REG_DUMP_EVENT; + fc_host_post_vendor_event(phba->host, fc_get_event_number(), + sizeof(event_data), (char *) &event_data, + SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); + psli->sli_flag &= ~LPFC_SLI2_ACTIVE; lpfc_offline(phba); phba->hba_state = LPFC_HBA_ERROR; @@ -939,12 +953,12 @@ lpfc_get_hba_model_desc(struct lpfc_hba * phba, uint8_t * mdp, uint8_t * descp) "10-port ", "PCIe"}; break; default: - m = (typeof(m)){ 0 }; + m = (typeof(m)){ NULL }; break; } break; default: - m = (typeof(m)){ 0 }; + m = (typeof(m)){ NULL }; break; } @@ -1339,7 +1353,8 @@ lpfc_offline(struct lpfc_hba * phba) struct lpfc_sli_ring *pring; struct lpfc_sli *psli; unsigned long iflag; - int i = 0; + int i; + int cnt = 0; if (!phba) return 0; @@ -1348,20 +1363,31 @@ lpfc_offline(struct lpfc_hba * phba) return 0; psli = &phba->sli; - pring = &psli->ring[psli->fcp_ring]; lpfc_linkdown(phba); + lpfc_sli_flush_mbox_queue(phba); - /* The linkdown event takes 30 seconds to timeout. */ - while (pring->txcmplq_cnt) { - mdelay(10); - if (i++ > 3000) - break; + for (i = 0; i < psli->num_rings; i++) { + pring = &psli->ring[i]; + /* The linkdown event takes 30 seconds to timeout. */ + while (pring->txcmplq_cnt) { + mdelay(10); + if (cnt++ > 3000) { + lpfc_printf_log(phba, + KERN_WARNING, LOG_INIT, + "%d:0466 Outstanding IO when " + "bringing Adapter offline\n", + phba->brd_no); + break; + } + } } + /* stop all timers associated with this hba */ lpfc_stop_timer(phba); phba->work_hba_events = 0; + phba->work_ha = 0; lpfc_printf_log(phba, KERN_WARNING, @@ -1451,7 +1477,6 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) goto out_put_host; host->unique_id = phba->brd_no; - init_MUTEX(&phba->hba_can_block); INIT_LIST_HEAD(&phba->ctrspbuflist); INIT_LIST_HEAD(&phba->rnidrspbuflist); INIT_LIST_HEAD(&phba->freebufList); @@ -1600,7 +1625,11 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) goto out_free_iocbq; } - /* We can rely on a queue depth attribute only after SLI HBA setup */ + /* + * Set initial can_queue value since 0 is no longer supported and + * scsi_add_host will fail. This will be adjusted later based on the + * max xri value determined in hba setup. + */ host->can_queue = phba->cfg_hba_queue_depth - 10; /* Tell the midlayer we support 16 byte commands */ @@ -1620,7 +1649,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) if (error) goto out_remove_host; - error = request_irq(phba->pcidev->irq, lpfc_intr_handler, SA_SHIRQ, + error = request_irq(phba->pcidev->irq, lpfc_intr_handler, IRQF_SHARED, LPFC_DRIVER_NAME, phba); if (error) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, @@ -1640,6 +1669,14 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) goto out_free_irq; } + /* + * hba setup may have changed the hba_queue_depth so we need to adjust + * the value of can_queue. + */ + host->can_queue = phba->cfg_hba_queue_depth - 10; + + lpfc_discovery_wait(phba); + if (phba->cfg_poll & DISABLE_FCP_RING_INT) { spin_lock_irq(phba->host->host_lock); lpfc_poll_start_timer(phba); diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index e42f22aaf71..4d016c2a1b2 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -651,3 +651,19 @@ lpfc_mbox_get(struct lpfc_hba * phba) return mbq; } + +int +lpfc_mbox_tmo_val(struct lpfc_hba *phba, int cmd) +{ + switch (cmd) { + case MBX_WRITE_NV: /* 0x03 */ + case MBX_UPDATE_CFG: /* 0x1B */ + case MBX_DOWN_LOAD: /* 0x1C */ + case MBX_DEL_LD_ENTRY: /* 0x1D */ + case MBX_LOAD_AREA: /* 0x81 */ + case MBX_FLASH_WR_ULA: /* 0x98 */ + case MBX_LOAD_EXP_ROM: /* 0x9C */ + return LPFC_MBOX_TMO_FLASH_CMD; + } + return LPFC_MBOX_TMO; +} diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c index 07017658ac5..066292d3995 100644 --- a/drivers/scsi/lpfc/lpfc_mem.c +++ b/drivers/scsi/lpfc/lpfc_mem.c @@ -133,6 +133,11 @@ lpfc_mem_free(struct lpfc_hba * phba) pci_pool_destroy(phba->lpfc_scsi_dma_buf_pool); pci_pool_destroy(phba->lpfc_mbuf_pool); + + /* Free the iocb lookup array */ + kfree(psli->iocbq_lookup); + psli->iocbq_lookup = NULL; + } void * diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 27d60ad897c..d5f415007db 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -179,7 +179,7 @@ lpfc_els_abort(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp, /* Abort outstanding I/O on NPort <nlp_DID> */ lpfc_printf_log(phba, KERN_INFO, LOG_DISCOVERY, - "%d:0201 Abort outstanding I/O on NPort x%x " + "%d:0205 Abort outstanding I/O on NPort x%x " "Data: x%x x%x x%x\n", phba->brd_no, ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_state, ndlp->nlp_rpi); @@ -393,6 +393,20 @@ lpfc_rcv_plogi(struct lpfc_hba * phba, mbox->context2 = ndlp; ndlp->nlp_flag |= (NLP_ACC_REGLOGIN | NLP_RCV_PLOGI); + /* + * If there is an outstanding PLOGI issued, abort it before + * sending ACC rsp for received PLOGI. If pending plogi + * is not canceled here, the plogi will be rejected by + * remote port and will be retried. On a configuration with + * single discovery thread, this will cause a huge delay in + * discovery. Also this will cause multiple state machines + * running in parallel for this node. + */ + if (ndlp->nlp_state == NLP_STE_PLOGI_ISSUE) { + /* software abort outstanding PLOGI */ + lpfc_els_abort(phba, ndlp, 1); + } + lpfc_els_rsp_acc(phba, ELS_CMD_PLOGI, cmdiocb, ndlp, mbox, 0); return 1; @@ -1110,6 +1124,17 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_hba * phba, phba->brd_no, did, mb->mbxStatus, phba->hba_state); + /* + * If RegLogin failed due to lack of HBA resources do not + * retry discovery. + */ + if (mb->mbxStatus == MBXERR_RPI_FULL) { + ndlp->nlp_prev_state = NLP_STE_UNUSED_NODE; + ndlp->nlp_state = NLP_STE_UNUSED_NODE; + lpfc_nlp_list(phba, ndlp, NLP_UNUSED_LIST); + return ndlp->nlp_state; + } + /* Put ndlp in npr list set plogi timer for 1 sec */ mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ * 1); spin_lock_irq(phba->host->host_lock); @@ -1590,7 +1615,13 @@ lpfc_rcv_padisc_npr_node(struct lpfc_hba * phba, lpfc_rcv_padisc(phba, ndlp, cmdiocb); - if (!(ndlp->nlp_flag & NLP_DELAY_TMO)) { + /* + * Do not start discovery if discovery is about to start + * or discovery in progress for this node. Starting discovery + * here will affect the counting of discovery threads. + */ + if ((!(ndlp->nlp_flag & NLP_DELAY_TMO)) && + (ndlp->nlp_flag & NLP_NPR_2B_DISC)){ if (ndlp->nlp_flag & NLP_NPR_ADISC) { ndlp->nlp_prev_state = NLP_STE_NPR_NODE; ndlp->nlp_state = NLP_STE_ADISC_ISSUE; @@ -1782,7 +1813,7 @@ lpfc_device_recov_npr_node(struct lpfc_hba * phba, */ /* * For a Link Down, all nodes on the ADISC, PLOGI, unmapped or mapped - * lists will receive a DEVICE_RECOVERY event. If the linkdown or nodev timers + * lists will receive a DEVICE_RECOVERY event. If the linkdown or devloss timers * expire, all effected nodes will receive a DEVICE_RM event. */ /* diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 7dc4c2e6bed..97ae98dc95d 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -21,6 +21,7 @@ #include <linux/pci.h> #include <linux/interrupt.h> +#include <linux/delay.h> #include <scsi/scsi.h> #include <scsi/scsi_device.h> @@ -41,20 +42,6 @@ #define LPFC_ABORT_WAIT 2 -static inline void -lpfc_block_requests(struct lpfc_hba * phba) -{ - down(&phba->hba_can_block); - scsi_block_requests(phba->host); -} - -static inline void -lpfc_unblock_requests(struct lpfc_hba * phba) -{ - scsi_unblock_requests(phba->host); - up(&phba->hba_can_block); -} - /* * This routine allocates a scsi buffer, which contains all the necessary * information needed to initiate a SCSI I/O. The non-DMAable buffer region @@ -167,22 +154,6 @@ static void lpfc_release_scsi_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb) { unsigned long iflag = 0; - /* - * There are only two special cases to consider. (1) the scsi command - * requested scatter-gather usage or (2) the scsi command allocated - * a request buffer, but did not request use_sg. There is a third - * case, but it does not require resource deallocation. - */ - if ((psb->seg_cnt > 0) && (psb->pCmd->use_sg)) { - dma_unmap_sg(&phba->pcidev->dev, psb->pCmd->request_buffer, - psb->seg_cnt, psb->pCmd->sc_data_direction); - } else { - if ((psb->nonsg_phys) && (psb->pCmd->request_bufflen)) { - dma_unmap_single(&phba->pcidev->dev, psb->nonsg_phys, - psb->pCmd->request_bufflen, - psb->pCmd->sc_data_direction); - } - } spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag); psb->pCmd = NULL; @@ -296,6 +267,27 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * lpfc_cmd) } static void +lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb) +{ + /* + * There are only two special cases to consider. (1) the scsi command + * requested scatter-gather usage or (2) the scsi command allocated + * a request buffer, but did not request use_sg. There is a third + * case, but it does not require resource deallocation. + */ + if ((psb->seg_cnt > 0) && (psb->pCmd->use_sg)) { + dma_unmap_sg(&phba->pcidev->dev, psb->pCmd->request_buffer, + psb->seg_cnt, psb->pCmd->sc_data_direction); + } else { + if ((psb->nonsg_phys) && (psb->pCmd->request_bufflen)) { + dma_unmap_single(&phba->pcidev->dev, psb->nonsg_phys, + psb->pCmd->request_bufflen, + psb->pCmd->sc_data_direction); + } + } +} + +static void lpfc_handle_fcp_err(struct lpfc_scsi_buf *lpfc_cmd) { struct scsi_cmnd *cmnd = lpfc_cmd->pCmd; @@ -468,6 +460,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, cmd->scsi_done(cmd); if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) { + lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd); lpfc_release_scsi_buf(phba, lpfc_cmd); return; } @@ -525,6 +518,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, } } + lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd); lpfc_release_scsi_buf(phba, lpfc_cmd); } @@ -623,6 +617,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_hba * phba, struct lpfc_scsi_buf * lpfc_cmd, static int lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, + unsigned int lun, uint8_t task_mgmt_cmd) { struct lpfc_sli *psli; @@ -641,8 +636,7 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_hba *phba, piocb = &piocbq->iocb; fcp_cmnd = lpfc_cmd->fcp_cmnd; - int_to_scsilun(lpfc_cmd->pCmd->device->lun, - &lpfc_cmd->fcp_cmnd->fcp_lun); + int_to_scsilun(lun, &lpfc_cmd->fcp_cmnd->fcp_lun); fcp_cmnd->fcpCntl2 = task_mgmt_cmd; piocb->ulpCommand = CMD_FCP_ICMND64_CR; @@ -669,14 +663,16 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_hba *phba, static int lpfc_scsi_tgt_reset(struct lpfc_scsi_buf * lpfc_cmd, struct lpfc_hba * phba, - unsigned tgt_id, struct lpfc_rport_data *rdata) + unsigned tgt_id, unsigned int lun, + struct lpfc_rport_data *rdata) { struct lpfc_iocbq *iocbq; struct lpfc_iocbq *iocbqrsp; int ret; lpfc_cmd->rdata = rdata; - ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, FCP_TARGET_RESET); + ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, lun, + FCP_TARGET_RESET); if (!ret) return FAILED; @@ -836,6 +832,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) return 0; out_host_busy_free_buf: + lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd); lpfc_release_scsi_buf(phba, lpfc_cmd); out_host_busy: return SCSI_MLQUEUE_HOST_BUSY; @@ -845,6 +842,21 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) return 0; } +static void +lpfc_block_error_handler(struct scsi_cmnd *cmnd) +{ + struct Scsi_Host *shost = cmnd->device->host; + struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device)); + + spin_lock_irq(shost->host_lock); + while (rport->port_state == FC_PORTSTATE_BLOCKED) { + spin_unlock_irq(shost->host_lock); + msleep(1000); + spin_lock_irq(shost->host_lock); + } + spin_unlock_irq(shost->host_lock); + return; +} static int lpfc_abort_handler(struct scsi_cmnd *cmnd) @@ -859,7 +871,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) unsigned int loop_count = 0; int ret = SUCCESS; - lpfc_block_requests(phba); + lpfc_block_error_handler(cmnd); spin_lock_irq(shost->host_lock); lpfc_cmd = (struct lpfc_scsi_buf *)cmnd->host_scribble; @@ -923,7 +935,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) schedule_timeout_uninterruptible(LPFC_ABORT_WAIT*HZ); spin_lock_irq(phba->host->host_lock); if (++loop_count - > (2 * phba->cfg_nodev_tmo)/LPFC_ABORT_WAIT) + > (2 * phba->cfg_devloss_tmo)/LPFC_ABORT_WAIT) break; } @@ -945,7 +957,6 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) cmnd->device->lun, cmnd->serial_number); spin_unlock_irq(shost->host_lock); - lpfc_unblock_requests(phba); return ret; } @@ -963,11 +974,11 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd) int ret = FAILED; int cnt, loopcnt; - lpfc_block_requests(phba); + lpfc_block_error_handler(cmnd); spin_lock_irq(shost->host_lock); /* * If target is not in a MAPPED state, delay the reset until - * target is rediscovered or nodev timeout expires. + * target is rediscovered or devloss timeout expires. */ while ( 1 ) { if (!pnode) @@ -986,12 +997,12 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd) if (lpfc_cmd == NULL) goto out; - lpfc_cmd->pCmd = cmnd; lpfc_cmd->timeout = 60; lpfc_cmd->scsi_hba = phba; lpfc_cmd->rdata = rdata; - ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, FCP_LUN_RESET); + ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, cmnd->device->lun, + FCP_LUN_RESET); if (!ret) goto out_free_scsi_buf; @@ -1018,7 +1029,6 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd) cmd_status = iocbqrsp->iocb.ulpStatus; lpfc_sli_release_iocbq(phba, iocbqrsp); - lpfc_release_scsi_buf(phba, lpfc_cmd); /* * All outstanding txcmplq I/Os should have been aborted by the device. @@ -1040,7 +1050,7 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd) spin_lock_irq(phba->host->host_lock); if (++loopcnt - > (2 * phba->cfg_nodev_tmo)/LPFC_RESET_WAIT) + > (2 * phba->cfg_devloss_tmo)/LPFC_RESET_WAIT) break; cnt = lpfc_sli_sum_iocb(phba, @@ -1057,6 +1067,8 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd) } out_free_scsi_buf: + lpfc_release_scsi_buf(phba, lpfc_cmd); + lpfc_printf_log(phba, KERN_ERR, LOG_FCP, "%d:0713 SCSI layer issued LUN reset (%d, %d) " "Data: x%x x%x x%x\n", @@ -1065,7 +1077,6 @@ out_free_scsi_buf: out: spin_unlock_irq(shost->host_lock); - lpfc_unblock_requests(phba); return ret; } @@ -1080,7 +1091,7 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) int cnt, loopcnt; struct lpfc_scsi_buf * lpfc_cmd; - lpfc_block_requests(phba); + lpfc_block_error_handler(cmnd); spin_lock_irq(shost->host_lock); lpfc_cmd = lpfc_get_scsi_buf(phba); @@ -1089,7 +1100,6 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) /* The lpfc_cmd storage is reused. Set all loop invariants. */ lpfc_cmd->timeout = 60; - lpfc_cmd->pCmd = cmnd; lpfc_cmd->scsi_hba = phba; /* @@ -1097,7 +1107,7 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) * targets known to the driver. Should any target reset * fail, this routine returns failure to the midlayer. */ - for (i = 0; i < MAX_FCP_TARGET; i++) { + for (i = 0; i < LPFC_MAX_TARGET; i++) { /* Search the mapped list for this target ID */ match = 0; list_for_each_entry(ndlp, &phba->fc_nlpmap_list, nlp_listp) { @@ -1109,11 +1119,11 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) if (!match) continue; - ret = lpfc_scsi_tgt_reset(lpfc_cmd, phba, - i, ndlp->rport->dd_data); + ret = lpfc_scsi_tgt_reset(lpfc_cmd, phba, i, cmnd->device->lun, + ndlp->rport->dd_data); if (ret != SUCCESS) { lpfc_printf_log(phba, KERN_ERR, LOG_FCP, - "%d:0713 Bus Reset on target %d failed\n", + "%d:0700 Bus Reset on target %d failed\n", phba->brd_no, i); err_count++; } @@ -1141,7 +1151,7 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) spin_lock_irq(phba->host->host_lock); if (++loopcnt - > (2 * phba->cfg_nodev_tmo)/LPFC_RESET_WAIT) + > (2 * phba->cfg_devloss_tmo)/LPFC_RESET_WAIT) break; cnt = lpfc_sli_sum_iocb(phba, @@ -1163,7 +1173,6 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) phba->brd_no, ret); out: spin_unlock_irq(shost->host_lock); - lpfc_unblock_requests(phba); return ret; } @@ -1240,7 +1249,7 @@ lpfc_slave_configure(struct scsi_device *sdev) * target pointer is stored in the starget_data for the * driver's sysfs entry point functions. */ - rport->dev_loss_tmo = phba->cfg_nodev_tmo + 5; + rport->dev_loss_tmo = phba->cfg_devloss_tmo; if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) { lpfc_sli_poll_fcp_ring(phba); diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index bb69a7a1ec5..70f4d5a1348 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -191,35 +191,12 @@ static int lpfc_sli_ringtxcmpl_put(struct lpfc_hba * phba, struct lpfc_sli_ring * pring, struct lpfc_iocbq * piocb) { - uint16_t iotag; - list_add_tail(&piocb->list, &pring->txcmplq); pring->txcmplq_cnt++; if (unlikely(pring->ringno == LPFC_ELS_RING)) mod_timer(&phba->els_tmofunc, jiffies + HZ * (phba->fc_ratov << 1)); - if (pring->fast_lookup) { - /* Setup fast lookup based on iotag for completion */ - iotag = piocb->iocb.ulpIoTag; - if (iotag && (iotag < pring->fast_iotag)) - *(pring->fast_lookup + iotag) = piocb; - else { - - /* Cmd ring <ringno> put: iotag <iotag> greater then - configured max <fast_iotag> wd0 <icmd> */ - lpfc_printf_log(phba, - KERN_ERR, - LOG_SLI, - "%d:0316 Cmd ring %d put: iotag x%x " - "greater then configured max x%x " - "wd0 x%x\n", - phba->brd_no, - pring->ringno, iotag, - pring->fast_iotag, - *(((uint32_t *)(&piocb->iocb)) + 7)); - } - } return (0); } @@ -343,7 +320,8 @@ lpfc_sli_next_iotag(struct lpfc_hba * phba, struct lpfc_iocbq * iocbq) kfree(old_arr); return iotag; } - } + } else + spin_unlock_irq(phba->host->host_lock); lpfc_printf_log(phba, KERN_ERR,LOG_SLI, "%d:0318 Failed to allocate IOTAG.last IOTAG is %d\n", @@ -601,7 +579,7 @@ lpfc_sli_handle_mb_event(struct lpfc_hba * phba) /* Stray Mailbox Interrupt, mbxCommand <cmd> mbxStatus <status> */ lpfc_printf_log(phba, - KERN_ERR, + KERN_WARNING, LOG_MBOX | LOG_SLI, "%d:0304 Stray Mailbox Interrupt " "mbxCommand x%x mbxStatus x%x\n", @@ -992,9 +970,11 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba * phba) * resources need to be recovered. */ if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) { - printk(KERN_INFO "%s: IOCB cmd 0x%x processed." - " Skipping completion\n", __FUNCTION__, - irsp->ulpCommand); + lpfc_printf_log(phba, KERN_INFO, LOG_SLI, + "%d:0314 IOCB cmd 0x%x" + " processed. Skipping" + " completion", phba->brd_no, + irsp->ulpCommand); break; } @@ -1127,7 +1107,7 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba, if (unlikely(irsp->ulpStatus)) { /* Rsp ring <ringno> error: IOCB */ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, - "%d:0326 Rsp Ring %d error: IOCB Data: " + "%d:0336 Rsp Ring %d error: IOCB Data: " "x%x x%x x%x x%x x%x x%x x%x x%x\n", phba->brd_no, pring->ringno, irsp->un.ulpWord[0], irsp->un.ulpWord[1], @@ -1145,9 +1125,11 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba, * resources need to be recovered. */ if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) { - printk(KERN_INFO "%s: IOCB cmd 0x%x processed. " - "Skipping completion\n", __FUNCTION__, - irsp->ulpCommand); + lpfc_printf_log(phba, KERN_INFO, LOG_SLI, + "%d:0333 IOCB cmd 0x%x" + " processed. Skipping" + " completion\n", phba->brd_no, + irsp->ulpCommand); break; } @@ -1178,7 +1160,7 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba, } else { /* Unknown IOCB command */ lpfc_printf_log(phba, KERN_ERR, LOG_SLI, - "%d:0321 Unknown IOCB command " + "%d:0334 Unknown IOCB command " "Data: x%x, x%x x%x x%x x%x\n", phba->brd_no, type, irsp->ulpCommand, irsp->ulpStatus, irsp->ulpIoTag, @@ -1261,7 +1243,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba * phba, lpfc_printf_log(phba, KERN_ERR, LOG_SLI, - "%d:0312 Ring %d handler: portRspPut %d " + "%d:0303 Ring %d handler: portRspPut %d " "is bigger then rsp ring %d\n", phba->brd_no, pring->ringno, portRspPut, portRspMax); @@ -1406,7 +1388,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba * phba, lpfc_printf_log(phba, KERN_ERR, LOG_SLI, - "%d:0321 Unknown IOCB command " + "%d:0335 Unknown IOCB command " "Data: x%x x%x x%x x%x\n", phba->brd_no, irsp->ulpCommand, @@ -1422,11 +1404,11 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba * phba, next_iocb, &saveq->list, list) { + list_del(&rspiocbp->list); lpfc_sli_release_iocbq(phba, rspiocbp); } } - lpfc_sli_release_iocbq(phba, saveq); } } @@ -1570,8 +1552,8 @@ lpfc_sli_brdready(struct lpfc_hba * phba, uint32_t mask) void lpfc_reset_barrier(struct lpfc_hba * phba) { - uint32_t * resp_buf; - uint32_t * mbox_buf; + uint32_t __iomem *resp_buf; + uint32_t __iomem *mbox_buf; volatile uint32_t mbox; uint32_t hc_copy; int i; @@ -1587,7 +1569,7 @@ void lpfc_reset_barrier(struct lpfc_hba * phba) * Tell the other part of the chip to suspend temporarily all * its DMA activity. */ - resp_buf = (uint32_t *)phba->MBslimaddr; + resp_buf = phba->MBslimaddr; /* Disable the error attention */ hc_copy = readl(phba->HCregaddr); @@ -1605,7 +1587,7 @@ void lpfc_reset_barrier(struct lpfc_hba * phba) ((MAILBOX_t *)&mbox)->mbxOwner = OWN_CHIP; writel(BARRIER_TEST_PATTERN, (resp_buf + 1)); - mbox_buf = (uint32_t *)phba->MBslimaddr; + mbox_buf = phba->MBslimaddr; writel(mbox, mbox_buf); for (i = 0; @@ -1734,15 +1716,13 @@ lpfc_sli_brdreset(struct lpfc_hba * phba) phba->fc_myDID = 0; phba->fc_prevDID = 0; - psli->sli_flag = 0; - /* Turn off parity checking and serr during the physical reset */ pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value); pci_write_config_word(phba->pcidev, PCI_COMMAND, (cfg_value & ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR))); - psli->sli_flag &= ~LPFC_SLI2_ACTIVE; + psli->sli_flag &= ~(LPFC_SLI2_ACTIVE | LPFC_PROCESS_LA); /* Now toggle INITFF bit in the Host Control Register */ writel(HC_INITFF, phba->HCregaddr); mdelay(1); @@ -1783,7 +1763,7 @@ lpfc_sli_brdrestart(struct lpfc_hba * phba) /* Restart HBA */ lpfc_printf_log(phba, KERN_INFO, LOG_SLI, - "%d:0328 Restart HBA Data: x%x x%x\n", phba->brd_no, + "%d:0337 Restart HBA Data: x%x x%x\n", phba->brd_no, phba->hba_state, psli->sli_flag); word0 = 0; @@ -1805,7 +1785,7 @@ lpfc_sli_brdrestart(struct lpfc_hba * phba) skip_post = 0; word0 = 0; /* This is really setting up word1 */ } - to_slim = (uint8_t *) phba->MBslimaddr + sizeof (uint32_t); + to_slim = phba->MBslimaddr + sizeof (uint32_t); writel(*(uint32_t *) mb, to_slim); readl(to_slim); /* flush */ @@ -1815,6 +1795,9 @@ lpfc_sli_brdrestart(struct lpfc_hba * phba) spin_unlock_irq(phba->host->host_lock); + memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets)); + psli->stats_start = get_seconds(); + if (skip_post) mdelay(100); else @@ -1925,6 +1908,9 @@ lpfc_sli_hba_setup(struct lpfc_hba * phba) } while (resetcount < 2 && !done) { + spin_lock_irq(phba->host->host_lock); + phba->sli.sli_flag |= LPFC_SLI_MBOX_ACTIVE; + spin_unlock_irq(phba->host->host_lock); phba->hba_state = LPFC_STATE_UNKNOWN; lpfc_sli_brdrestart(phba); msleep(2500); @@ -1932,6 +1918,9 @@ lpfc_sli_hba_setup(struct lpfc_hba * phba) if (rc) break; + spin_lock_irq(phba->host->host_lock); + phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; + spin_unlock_irq(phba->host->host_lock); resetcount++; /* Call pre CONFIG_PORT mailbox command initialization. A value of 0 @@ -2217,7 +2206,8 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag) return (MBX_NOT_FINISHED); } /* timeout active mbox command */ - mod_timer(&psli->mbox_tmo, jiffies + HZ * LPFC_MBOX_TMO); + mod_timer(&psli->mbox_tmo, (jiffies + + (HZ * lpfc_mbox_tmo_val(phba, mb->mbxCommand)))); } /* Mailbox cmd <cmd> issue */ @@ -2277,7 +2267,6 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag) break; case MBX_POLL: - i = 0; psli->mbox_active = NULL; if (psli->sli_flag & LPFC_SLI2_ACTIVE) { /* First read mbox status word */ @@ -2291,11 +2280,14 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag) /* Read the HBA Host Attention Register */ ha_copy = readl(phba->HAregaddr); + i = lpfc_mbox_tmo_val(phba, mb->mbxCommand); + i *= 1000; /* Convert to ms */ + /* Wait for command to complete */ while (((word0 & OWN_CHIP) == OWN_CHIP) || (!(ha_copy & HA_MBATT) && (phba->hba_state > LPFC_WARM_START))) { - if (i++ >= 100) { + if (i-- <= 0) { psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; spin_unlock_irqrestore(phba->host->host_lock, drvr_flag); @@ -2313,7 +2305,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag) /* Can be in interrupt context, do not sleep */ /* (or might be called with interrupts disabled) */ - mdelay(i); + mdelay(1); spin_lock_irqsave(phba->host->host_lock, drvr_flag); @@ -2659,8 +2651,6 @@ lpfc_sli_hba_down(struct lpfc_hba * phba) INIT_LIST_HEAD(&(pring->txq)); - kfree(pring->fast_lookup); - pring->fast_lookup = NULL; } spin_unlock_irqrestore(phba->host->host_lock, flags); @@ -3030,7 +3020,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba * phba, if (timeleft == 0) { lpfc_printf_log(phba, KERN_ERR, LOG_SLI, - "%d:0329 IOCB wait timeout error - no " + "%d:0338 IOCB wait timeout error - no " "wake response Data x%x\n", phba->brd_no, timeout); retval = IOCB_TIMEDOUT; @@ -3110,6 +3100,24 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq, return retval; } +int +lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba) +{ + int i = 0; + + while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE && !phba->stopped) { + if (i++ > LPFC_MBOX_TMO * 1000) + return 1; + + if (lpfc_sli_handle_mb_event(phba) == 0) + i = 0; + + msleep(1); + } + + return (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) ? 1 : 0; +} + irqreturn_t lpfc_intr_handler(int irq, void *dev_id, struct pt_regs * regs) { diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h index a52d6c6cf08..e26de680935 100644 --- a/drivers/scsi/lpfc/lpfc_sli.h +++ b/drivers/scsi/lpfc/lpfc_sli.h @@ -135,8 +135,6 @@ struct lpfc_sli_ring { uint32_t fast_iotag; /* max fastlookup based iotag */ uint32_t iotag_ctr; /* keeps track of the next iotag to use */ uint32_t iotag_max; /* max iotag value to use */ - struct lpfc_iocbq ** fast_lookup; /* array of IOCB ptrs indexed by - iotag */ struct list_head txq; uint16_t txq_cnt; /* current length of queue */ uint16_t txq_max; /* max length */ @@ -174,6 +172,18 @@ struct lpfc_sli_stat { uint32_t mbox_busy; /* Mailbox cmd busy */ }; +/* Structure to store link status values when port stats are reset */ +struct lpfc_lnk_stat { + uint32_t link_failure_count; + uint32_t loss_of_sync_count; + uint32_t loss_of_signal_count; + uint32_t prim_seq_protocol_err_count; + uint32_t invalid_tx_word_count; + uint32_t invalid_crc_count; + uint32_t error_frames; + uint32_t link_events; +}; + /* Structure used to hold SLI information */ struct lpfc_sli { uint32_t num_rings; @@ -203,6 +213,8 @@ struct lpfc_sli { struct lpfc_iocbq ** iocbq_lookup; /* array to lookup IOCB by IOTAG */ size_t iocbq_lookup_len; /* current lengs of the array */ uint16_t last_iotag; /* last allocated IOTAG */ + unsigned long stats_start; /* in seconds */ + struct lpfc_lnk_stat lnk_stat_offsets; }; /* Given a pointer to the start of the ring, and the slot number of @@ -213,3 +225,9 @@ struct lpfc_sli { #define LPFC_MBOX_TMO 30 /* Sec tmo for outstanding mbox command */ +#define LPFC_MBOX_TMO_FLASH_CMD 300 /* Sec tmo for outstanding FLASH write + * or erase cmds. This is especially + * long because of the potential of + * multiple flash erases that can be + * spawned. + */ diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index 6b737568b83..ac417908b40 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.1.6" +#define LPFC_DRIVER_VERSION "8.1.10" #define LPFC_DRIVER_NAME "lpfc" diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c index 93edaa8696c..6422de72bf4 100644 --- a/drivers/scsi/mac53c94.c +++ b/drivers/scsi/mac53c94.c @@ -378,7 +378,7 @@ static void set_dma_cmds(struct fsc_state *state, struct scsi_cmnd *cmd) int nseg; total = 0; - scl = (struct scatterlist *) cmd->buffer; + scl = (struct scatterlist *) cmd->request_buffer; nseg = pci_map_sg(state->pdev, scl, cmd->use_sg, cmd->sc_data_direction); for (i = 0; i < nseg; ++i) { @@ -431,7 +431,7 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat struct fsc_state *state; struct Scsi_Host *host; void *dma_cmd_space; - unsigned char *clkprop; + const unsigned char *clkprop; int proplen, rc = -ENODEV; if (macio_resource_count(mdev) != 2 || macio_irq_count(mdev) != 2) { diff --git a/drivers/scsi/mac_esp.c b/drivers/scsi/mac_esp.c index e31fadd6190..118206d68c6 100644 --- a/drivers/scsi/mac_esp.c +++ b/drivers/scsi/mac_esp.c @@ -43,9 +43,6 @@ /* #define DEBUG_MAC_ESP */ -#define mac_turnon_irq(x) mac_enable_irq(x) -#define mac_turnoff_irq(x) mac_disable_irq(x) - extern void esp_handle(struct NCR_ESP *esp); extern void mac_esp_intr(int irq, void *dev_id, struct pt_regs *pregs); @@ -639,13 +636,13 @@ static void dma_init_write(struct NCR_ESP * esp, char * vaddress, int length) static void dma_ints_off(struct NCR_ESP * esp) { - mac_turnoff_irq(esp->irq); + disable_irq(esp->irq); } static void dma_ints_on(struct NCR_ESP * esp) { - mac_turnon_irq(esp->irq); + enable_irq(esp->irq); } /* diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c index 777f9bcd117..a942a21dd87 100644 --- a/drivers/scsi/mac_scsi.c +++ b/drivers/scsi/mac_scsi.c @@ -65,9 +65,6 @@ #define RESET_BOOT #define DRIVER_SETUP -#define ENABLE_IRQ() mac_enable_irq( IRQ_MAC_SCSI ); -#define DISABLE_IRQ() mac_disable_irq( IRQ_MAC_SCSI ); - extern void via_scsi_clear(void); #ifdef RESET_BOOT @@ -351,7 +348,7 @@ static void mac_scsi_reset_boot(struct Scsi_Host *instance) printk(KERN_INFO "Macintosh SCSI: resetting the SCSI bus..." ); /* switch off SCSI IRQ - catch an interrupt without IRQ bit set else */ - mac_disable_irq(IRQ_MAC_SCSI); + disable_irq(IRQ_MAC_SCSI); /* get in phase */ NCR5380_write( TARGET_COMMAND_REG, @@ -369,7 +366,7 @@ static void mac_scsi_reset_boot(struct Scsi_Host *instance) barrier(); /* switch on SCSI IRQ again */ - mac_enable_irq(IRQ_MAC_SCSI); + enable_irq(IRQ_MAC_SCSI); printk(KERN_INFO " done\n" ); } diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 5d2cefb5e52..b87bef69ba0 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -2822,9 +2822,7 @@ mega_print_inquiry(char *page, char *scsi_inq) i = scsi_inq[0] & 0x1f; - len += sprintf(page+len, " Type: %s ", - i < MAX_SCSI_DEVICE_CODE ? scsi_device_types[i] : - "Unknown "); + len += sprintf(page+len, " Type: %s ", scsi_device_type(i)); len += sprintf(page+len, " ANSI SCSI revision: %02x", scsi_inq[2] & 0x07); @@ -3658,8 +3656,9 @@ megadev_ioctl(struct inode *inode, struct file *filep, unsigned int cmd, * Send the request sense data also, irrespective of * whether the user has asked for it or not. */ - copy_to_user(upthru->reqsensearea, - pthru->reqsensearea, 14); + if (copy_to_user(upthru->reqsensearea, + pthru->reqsensearea, 14)) + rval = -EFAULT; freemem_and_return: if( pthru->dataxferlen ) { @@ -4714,7 +4713,7 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) if (request_irq(irq, (adapter->flag & BOARD_MEMMAP) ? megaraid_isr_memmapped : megaraid_isr_iomapped, - SA_SHIRQ, "megaraid", adapter)) { + IRQF_SHARED, "megaraid", adapter)) { printk(KERN_WARNING "megaraid: Couldn't register IRQ %d!\n", irq); goto out_free_scb_list; diff --git a/drivers/scsi/megaraid/mega_common.h b/drivers/scsi/megaraid/mega_common.h index 4675343228a..8cd0bd1d0f7 100644 --- a/drivers/scsi/megaraid/mega_common.h +++ b/drivers/scsi/megaraid/mega_common.h @@ -37,6 +37,12 @@ #define LSI_MAX_CHANNELS 16 #define LSI_MAX_LOGICAL_DRIVES_64LD (64+1) +#define HBA_SIGNATURE_64_BIT 0x299 +#define PCI_CONF_AMISIG64 0xa4 + +#define MEGA_SCSI_INQ_EVPD 1 +#define MEGA_INVALID_FIELD_IN_CDB 0x24 + /** * scb_t - scsi command control block diff --git a/drivers/scsi/megaraid/megaraid_ioctl.h b/drivers/scsi/megaraid/megaraid_ioctl.h index bdaee144a1c..b8aa34202ec 100644 --- a/drivers/scsi/megaraid/megaraid_ioctl.h +++ b/drivers/scsi/megaraid/megaraid_ioctl.h @@ -132,6 +132,10 @@ typedef struct uioc { /* Driver Data: */ void __user * user_data; uint32_t user_data_len; + + /* 64bit alignment */ + uint32_t pad_for_64bit_align; + mraid_passthru_t __user *user_pthru; mraid_passthru_t *pthru32; diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index bec1424eda8..266b3910846 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -10,7 +10,7 @@ * 2 of the License, or (at your option) any later version. * * FILE : megaraid_mbox.c - * Version : v2.20.4.8 (Apr 11 2006) + * Version : v2.20.4.9 (Jul 16 2006) * * Authors: * Atul Mukker <Atul.Mukker@lsil.com> @@ -330,6 +330,21 @@ static struct device_attribute *megaraid_sdev_attrs[] = { NULL, }; +/** + * megaraid_change_queue_depth - Change the device's queue depth + * @sdev: scsi device struct + * @qdepth: depth to set + * + * Return value: + * actual depth set + **/ +static int megaraid_change_queue_depth(struct scsi_device *sdev, int qdepth) +{ + if (qdepth > MBOX_MAX_SCSI_CMDS) + qdepth = MBOX_MAX_SCSI_CMDS; + scsi_adjust_queue_depth(sdev, 0, qdepth); + return sdev->queue_depth; +} /* * Scsi host template for megaraid unified driver @@ -343,6 +358,7 @@ static struct scsi_host_template megaraid_template_g = { .eh_device_reset_handler = megaraid_reset_handler, .eh_bus_reset_handler = megaraid_reset_handler, .eh_host_reset_handler = megaraid_reset_handler, + .change_queue_depth = megaraid_change_queue_depth, .use_clustering = ENABLE_CLUSTERING, .sdev_attrs = megaraid_sdev_attrs, .shost_attrs = megaraid_shost_attrs, @@ -714,12 +730,13 @@ megaraid_io_detach(adapter_t *adapter) * . Allocate memory required for all the commands * . Use internal library of FW routines, build up complete soft state */ -static int __init +static int __devinit megaraid_init_mbox(adapter_t *adapter) { struct pci_dev *pdev; mraid_device_t *raid_dev; int i; + uint32_t magic64; adapter->ito = MBOX_TIMEOUT; @@ -767,7 +784,7 @@ megaraid_init_mbox(adapter_t *adapter) // // request IRQ and register the interrupt service routine - if (request_irq(adapter->irq, megaraid_isr, SA_SHIRQ, "megaraid", + if (request_irq(adapter->irq, megaraid_isr, IRQF_SHARED, "megaraid", adapter)) { con_log(CL_ANN, (KERN_WARNING @@ -863,12 +880,33 @@ megaraid_init_mbox(adapter_t *adapter) // Set the DMA mask to 64-bit. All supported controllers as capable of // DMA in this range - if (pci_set_dma_mask(adapter->pdev, DMA_64BIT_MASK) != 0) { - - con_log(CL_ANN, (KERN_WARNING - "megaraid: could not set DMA mask for 64-bit.\n")); + pci_read_config_dword(adapter->pdev, PCI_CONF_AMISIG64, &magic64); + + if (((magic64 == HBA_SIGNATURE_64_BIT) && + ((adapter->pdev->subsystem_device != + PCI_SUBSYS_ID_MEGARAID_SATA_150_6) || + (adapter->pdev->subsystem_device != + PCI_SUBSYS_ID_MEGARAID_SATA_150_4))) || + (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC && + adapter->pdev->device == PCI_DEVICE_ID_VERDE) || + (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC && + adapter->pdev->device == PCI_DEVICE_ID_DOBSON) || + (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC && + adapter->pdev->device == PCI_DEVICE_ID_LINDSAY) || + (adapter->pdev->vendor == PCI_VENDOR_ID_DELL && + adapter->pdev->device == PCI_DEVICE_ID_PERC4_DI_EVERGLADES) || + (adapter->pdev->vendor == PCI_VENDOR_ID_DELL && + adapter->pdev->device == PCI_DEVICE_ID_PERC4E_DI_KOBUK)) { + if (pci_set_dma_mask(adapter->pdev, DMA_64BIT_MASK)) { + con_log(CL_ANN, (KERN_WARNING + "megaraid: DMA mask for 64-bit failed\n")); - goto out_free_sysfs_res; + if (pci_set_dma_mask (adapter->pdev, DMA_32BIT_MASK)) { + con_log(CL_ANN, (KERN_WARNING + "megaraid: 32-bit DMA mask failed\n")); + goto out_free_sysfs_res; + } + } } // setup tasklet for DPC @@ -1622,6 +1660,14 @@ megaraid_mbox_build_cmd(adapter_t *adapter, struct scsi_cmnd *scp, int *busy) rdev->last_disp |= (1L << SCP2CHANNEL(scp)); } + if (scp->cmnd[1] & MEGA_SCSI_INQ_EVPD) { + scp->sense_buffer[0] = 0x70; + scp->sense_buffer[2] = ILLEGAL_REQUEST; + scp->sense_buffer[12] = MEGA_INVALID_FIELD_IN_CDB; + scp->result = CHECK_CONDITION << 1; + return NULL; + } + /* Fall through */ case READ_CAPACITY: diff --git a/drivers/scsi/megaraid/megaraid_mbox.h b/drivers/scsi/megaraid/megaraid_mbox.h index 868fb0ec93e..2b5a3285f79 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.h +++ b/drivers/scsi/megaraid/megaraid_mbox.h @@ -21,8 +21,8 @@ #include "megaraid_ioctl.h" -#define MEGARAID_VERSION "2.20.4.8" -#define MEGARAID_EXT_VERSION "(Release Date: Mon Apr 11 12:27:22 EST 2006)" +#define MEGARAID_VERSION "2.20.4.9" +#define MEGARAID_EXT_VERSION "(Release Date: Sun Jul 16 12:27:22 EST 2006)" /* diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c index e8f534fb336..d85b9a8f1b8 100644 --- a/drivers/scsi/megaraid/megaraid_mm.c +++ b/drivers/scsi/megaraid/megaraid_mm.c @@ -10,7 +10,7 @@ * 2 of the License, or (at your option) any later version. * * FILE : megaraid_mm.c - * Version : v2.20.2.6 (Mar 7 2005) + * Version : v2.20.2.7 (Jul 16 2006) * * Common management module */ diff --git a/drivers/scsi/megaraid/megaraid_mm.h b/drivers/scsi/megaraid/megaraid_mm.h index 3d9e67d6849..c8762b2b8ed 100644 --- a/drivers/scsi/megaraid/megaraid_mm.h +++ b/drivers/scsi/megaraid/megaraid_mm.h @@ -27,9 +27,9 @@ #include "megaraid_ioctl.h" -#define LSI_COMMON_MOD_VERSION "2.20.2.6" +#define LSI_COMMON_MOD_VERSION "2.20.2.7" #define LSI_COMMON_MOD_EXT_VERSION \ - "(Release Date: Mon Mar 7 00:01:03 EST 2005)" + "(Release Date: Sun Jul 16 00:01:03 EST 2006)" #define LSI_DBGLVL dbglevel diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 0c9516ff636..4cab5b534b2 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -10,7 +10,7 @@ * 2 of the License, or (at your option) any later version. * * FILE : megaraid_sas.c - * Version : v00.00.02.04 + * Version : v00.00.03.01 * * Authors: * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com> @@ -53,25 +53,15 @@ MODULE_DESCRIPTION("LSI Logic MegaRAID SAS Driver"); */ static struct pci_device_id megasas_pci_table[] = { - { - PCI_VENDOR_ID_LSI_LOGIC, - PCI_DEVICE_ID_LSI_SAS1064R, // xscale IOP - PCI_ANY_ID, - PCI_ANY_ID, - }, - { - PCI_VENDOR_ID_LSI_LOGIC, - PCI_DEVICE_ID_LSI_SAS1078R, // ppc IOP - PCI_ANY_ID, - PCI_ANY_ID, - }, - { - PCI_VENDOR_ID_DELL, - PCI_DEVICE_ID_DELL_PERC5, // xscale IOP - PCI_ANY_ID, - PCI_ANY_ID, - }, - {0} /* Terminating entry */ + {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1064R)}, + /* xscale IOP */ + {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078R)}, + /* ppc IOP */ + {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_VERDE_ZCR)}, + /* xscale IOP, vega */ + {PCI_DEVICE(PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_PERC5)}, + /* xscale IOP */ + {} }; MODULE_DEVICE_TABLE(pci, megasas_pci_table); @@ -289,9 +279,14 @@ static struct megasas_instance_template megasas_instance_template_ppc = { * @regs: MFI register set */ static inline void -megasas_disable_intr(struct megasas_register_set __iomem * regs) +megasas_disable_intr(struct megasas_instance *instance) { u32 mask = 0x1f; + struct megasas_register_set __iomem *regs = instance->reg_set; + + if(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1078R) + mask = 0xffffffff; + writel(mask, ®s->outbound_intr_mask); /* Dummy readl to force pci flush */ @@ -1260,7 +1255,7 @@ megasas_transition_to_ready(struct megasas_instance* instance) /* * Bring it to READY state; assuming max wait 2 secs */ - megasas_disable_intr(instance->reg_set); + megasas_disable_intr(instance); writel(MFI_INIT_READY, &instance->reg_set->inbound_doorbell); max_wait = 10; @@ -1757,6 +1752,11 @@ static int megasas_init_mfi(struct megasas_instance *instance) init_frame->data_xfer_len = sizeof(struct megasas_init_queue_info); /* + * disable the intr before firing the init frame to FW + */ + megasas_disable_intr(instance); + + /* * Issue the init frame in polled mode */ if (megasas_issue_polled(instance, cmd)) { @@ -2191,7 +2191,7 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) /* * Register IRQ */ - if (request_irq(pdev->irq, megasas_isr, SA_SHIRQ, "megasas", instance)) { + if (request_irq(pdev->irq, megasas_isr, IRQF_SHARED, "megasas", instance)) { printk(KERN_DEBUG "megasas: Failed to register IRQ\n"); goto fail_irq; } @@ -2234,7 +2234,7 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) megasas_mgmt_info.max_index--; pci_set_drvdata(pdev, NULL); - megasas_disable_intr(instance->reg_set); + megasas_disable_intr(instance); free_irq(instance->pdev->irq, instance); megasas_release_mfi(instance); @@ -2364,7 +2364,7 @@ static void megasas_detach_one(struct pci_dev *pdev) pci_set_drvdata(instance->pdev, NULL); - megasas_disable_intr(instance->reg_set); + megasas_disable_intr(instance); free_irq(instance->pdev->irq, instance); @@ -2838,7 +2838,7 @@ static int __init megasas_init(void) /* * Register ourselves as PCI hotplug module */ - rval = pci_module_init(&megasas_pci_driver); + rval = pci_register_driver(&megasas_pci_driver); if (rval) { printk(KERN_DEBUG "megasas: PCI hotplug regisration failed \n"); diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index 927d6ffef05..3531a14222a 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -18,9 +18,16 @@ /** * MegaRAID SAS Driver meta data */ -#define MEGASAS_VERSION "00.00.02.04" -#define MEGASAS_RELDATE "Feb 03, 2006" -#define MEGASAS_EXT_VERSION "Fri Feb 03 14:31:44 PST 2006" +#define MEGASAS_VERSION "00.00.03.01" +#define MEGASAS_RELDATE "May 14, 2006" +#define MEGASAS_EXT_VERSION "Sun May 14 22:49:52 PDT 2006" + +/* + * Device IDs + */ +#define PCI_DEVICE_ID_LSI_SAS1078R 0x0060 +#define PCI_DEVICE_ID_LSI_VERDE_ZCR 0x0413 + /* * ===================================== * MegaRAID SAS MFI firmware definitions @@ -554,7 +561,11 @@ struct megasas_ctrl_info { #define MFI_POLL_TIMEOUT_SECS 10 #define MFI_REPLY_1078_MESSAGE_INTERRUPT 0x80000000 -#define PCI_DEVICE_ID_LSI_SAS1078R 0x00000060 + +/* +* register set for both 1068 and 1078 controllers +* structure extended for 1078 registers +*/ struct megasas_register_set { u32 reserved_0[4]; /*0000h*/ @@ -1150,10 +1161,10 @@ struct compat_megasas_iocpacket { struct compat_iovec sgl[MAX_IOCTL_SGE]; } __attribute__ ((packed)); +#define MEGASAS_IOC_FIRMWARE32 _IOWR('M', 1, struct compat_megasas_iocpacket) #endif #define MEGASAS_IOC_FIRMWARE _IOWR('M', 1, struct megasas_iocpacket) -#define MEGASAS_IOC_FIRMWARE32 _IOWR('M', 1, struct compat_megasas_iocpacket) #define MEGASAS_IOC_GET_AEN _IOW('M', 3, struct megasas_aen) struct megasas_mgmt_info { diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c index f852421002e..683fc7ae4b8 100644 --- a/drivers/scsi/mesh.c +++ b/drivers/scsi/mesh.c @@ -18,7 +18,6 @@ * - retry arbitration if lost (unless higher levels do this for us) * - power down the chip when no device is detected */ -#include <linux/config.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/delay.h> @@ -1269,7 +1268,7 @@ static void set_dma_cmds(struct mesh_state *ms, struct scsi_cmnd *cmd) if (cmd->use_sg > 0) { int nseg; total = 0; - scl = (struct scatterlist *) cmd->buffer; + scl = (struct scatterlist *) cmd->request_buffer; off = ms->data_ptr; nseg = pci_map_sg(ms->pdev, scl, cmd->use_sg, cmd->sc_data_direction); @@ -1757,16 +1756,23 @@ static void set_mesh_power(struct mesh_state *ms, int state) pmac_call_feature(PMAC_FTR_MESH_ENABLE, macio_get_of_node(ms->mdev), 0, 0); msleep(10); } -} +} #ifdef CONFIG_PM -static int mesh_suspend(struct macio_dev *mdev, pm_message_t state) +static int mesh_suspend(struct macio_dev *mdev, pm_message_t mesg) { struct mesh_state *ms = (struct mesh_state *)macio_get_drvdata(mdev); unsigned long flags; - if (state.event == mdev->ofdev.dev.power.power_state.event || state.event < 2) + switch (mesg.event) { + case PM_EVENT_SUSPEND: + case PM_EVENT_FREEZE: + break; + default: + return 0; + } + if (mesg.event == mdev->ofdev.dev.power.power_state.event) return 0; scsi_block_requests(ms->host); @@ -1781,7 +1787,7 @@ static int mesh_suspend(struct macio_dev *mdev, pm_message_t state) disable_irq(ms->meshintr); set_mesh_power(ms, 0); - mdev->ofdev.dev.power.power_state = state; + mdev->ofdev.dev.power.power_state = mesg; return 0; } @@ -1851,7 +1857,8 @@ static int mesh_probe(struct macio_dev *mdev, const struct of_device_id *match) { struct device_node *mesh = macio_get_of_node(mdev); struct pci_dev* pdev = macio_get_pci_dev(mdev); - int tgt, *cfp, minper; + int tgt, minper; + const int *cfp; struct mesh_state *ms; struct Scsi_Host *mesh_host; void *dma_cmd_space; @@ -1940,7 +1947,7 @@ static int mesh_probe(struct macio_dev *mdev, const struct of_device_id *match) ms->tgts[tgt].current_req = NULL; } - if ((cfp = (int *) get_property(mesh, "clock-frequency", NULL))) + if ((cfp = get_property(mesh, "clock-frequency", NULL))) ms->clk_freq = *cfp; else { printk(KERN_INFO "mesh: assuming 50MHz clock frequency\n"); diff --git a/drivers/scsi/mvme147.c b/drivers/scsi/mvme147.c index cb367c2c5c7..9b991b746d1 100644 --- a/drivers/scsi/mvme147.c +++ b/drivers/scsi/mvme147.c @@ -29,7 +29,7 @@ static irqreturn_t mvme147_intr (int irq, void *dummy, struct pt_regs *fp) return IRQ_HANDLED; } -static int dma_setup (Scsi_Cmnd *cmd, int dir_in) +static int dma_setup(struct scsi_cmnd *cmd, int dir_in) { unsigned char flags = 0x01; unsigned long addr = virt_to_bus(cmd->SCp.ptr); @@ -57,7 +57,7 @@ static int dma_setup (Scsi_Cmnd *cmd, int dir_in) return 0; } -static void dma_stop (struct Scsi_Host *instance, Scsi_Cmnd *SCpnt, +static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, int status) { m147_pcc->dma_cntrl = 0; @@ -112,7 +112,7 @@ int mvme147_detect(struct scsi_host_template *tpnt) return 0; } -static int mvme147_bus_reset(Scsi_Cmnd *cmd) +static int mvme147_bus_reset(struct scsi_cmnd *cmd) { /* FIXME perform bus-specific reset */ diff --git a/drivers/scsi/mvme147.h b/drivers/scsi/mvme147.h index 2f56d69bd18..32aee85434d 100644 --- a/drivers/scsi/mvme147.h +++ b/drivers/scsi/mvme147.h @@ -12,10 +12,6 @@ int mvme147_detect(struct scsi_host_template *); int mvme147_release(struct Scsi_Host *); -const char *wd33c93_info(void); -int wd33c93_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *)); -int wd33c93_abort(Scsi_Cmnd *); -int wd33c93_reset(Scsi_Cmnd *, unsigned int); #ifndef CMD_PER_LUN #define CMD_PER_LUN 2 diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c index 6ab035590ee..b28712df0b7 100644 --- a/drivers/scsi/ncr53c8xx.c +++ b/drivers/scsi/ncr53c8xx.c @@ -5118,8 +5118,7 @@ static void ncr_ccb_skipped(struct ncb *np, struct ccb *cp) cp->host_status &= ~HS_SKIPMASK; cp->start.schedule.l_paddr = cpu_to_scr(NCB_SCRIPT_PHYS (np, select)); - list_del(&cp->link_ccbq); - list_add_tail(&cp->link_ccbq, &lp->skip_ccbq); + list_move_tail(&cp->link_ccbq, &lp->skip_ccbq); if (cp->queued) { --lp->queuedccbs; } diff --git a/drivers/scsi/ncr53c8xx.h b/drivers/scsi/ncr53c8xx.h index 0e4e46a0133..78818b6684f 100644 --- a/drivers/scsi/ncr53c8xx.h +++ b/drivers/scsi/ncr53c8xx.h @@ -53,10 +53,8 @@ #ifndef NCR53C8XX_H #define NCR53C8XX_H -#include <linux/config.h> #include <scsi/scsi_host.h> -#include <linux/config.h> /* ** If you want a driver as small as possible, donnot define the diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c index 5c55e152e71..bfb4f49e125 100644 --- a/drivers/scsi/nsp32.c +++ b/drivers/scsi/nsp32.c @@ -2866,8 +2866,7 @@ static int nsp32_detect(struct scsi_host_template *sht) */ nsp32_do_bus_reset(data); - ret = request_irq(host->irq, do_nsp32_isr, - SA_SHIRQ | SA_SAMPLE_RANDOM, "nsp32", data); + ret = request_irq(host->irq, do_nsp32_isr, IRQF_SHARED, "nsp32", data); if (ret < 0) { nsp32_msg(KERN_ERR, "Unable to allocate IRQ for NinjaSCSI32 " "SCSI PCI controller. Interrupt: %d", host->irq); @@ -2886,12 +2885,19 @@ static int nsp32_detect(struct scsi_host_template *sht) } #if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73)) - scsi_add_host (host, &PCIDEV->dev); + ret = scsi_add_host(host, &PCIDEV->dev); + if (ret) { + nsp32_msg(KERN_ERR, "failed to add scsi host"); + goto free_region; + } scsi_scan_host(host); #endif pci_set_drvdata(PCIDEV, host); return DETECT_OK; + free_region: + release_region(host->io_port, host->n_io_port); + free_irq: free_irq(host->irq, data); diff --git a/drivers/scsi/oktagon_esp.c b/drivers/scsi/oktagon_esp.c index dee426f8c07..dd67a68c5c2 100644 --- a/drivers/scsi/oktagon_esp.c +++ b/drivers/scsi/oktagon_esp.c @@ -6,7 +6,6 @@ * Based on cyber_esp.c */ -#include <linux/config.h> #if defined(CONFIG_AMIGA) || defined(CONFIG_APUS) #define USE_BOTTOM_HALF @@ -198,7 +197,7 @@ int oktagon_esp_detect(struct scsi_host_template *tpnt) esp->esp_command_dvma = (__u32) cmd_buffer; esp->irq = IRQ_AMIGA_PORTS; - request_irq(IRQ_AMIGA_PORTS, esp_intr, SA_SHIRQ, + request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED, "BSC Oktagon SCSI", esp->ehost); /* Figure out our scsi ID on the bus */ diff --git a/drivers/scsi/oktagon_io.S b/drivers/scsi/oktagon_io.S index 08ce8d80d8f..8a7340b0270 100644 --- a/drivers/scsi/oktagon_io.S +++ b/drivers/scsi/oktagon_io.S @@ -23,7 +23,6 @@ int oktag_from_io(long *addr,long *paddr,long len) * is moved to/from the IO register. */ -#include <linux/config.h> #ifdef CONFIG_APUS diff --git a/drivers/scsi/osst.h b/drivers/scsi/osst.h index 011d4d6ca9f..1e426f5d0ed 100644 --- a/drivers/scsi/osst.h +++ b/drivers/scsi/osst.h @@ -3,7 +3,6 @@ */ #include <asm/byteorder.h> -#include <linux/config.h> #include <linux/completion.h> /* FIXME - rename and use the following two types or delete them! diff --git a/drivers/scsi/pas16.c b/drivers/scsi/pas16.c index 1bf96ed8f93..1434209a8ac 100644 --- a/drivers/scsi/pas16.c +++ b/drivers/scsi/pas16.c @@ -454,7 +454,7 @@ int __init pas16_detect(struct scsi_host_template * tpnt) instance->irq = NCR5380_probe_irq(instance, PAS16_IRQS); if (instance->irq != SCSI_IRQ_NONE) - if (request_irq(instance->irq, pas16_intr, SA_INTERRUPT, "pas16", instance)) { + if (request_irq(instance->irq, pas16_intr, IRQF_DISABLED, "pas16", instance)) { printk("scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq); instance->irq = SCSI_IRQ_NONE; diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index 231f9c311c6..0d4c04e1f3d 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -1623,7 +1623,7 @@ static int nsp_cs_probe(struct pcmcia_device *link) /* Interrupt handler */ link->irq.Handler = &nspintr; link->irq.Instance = info; - link->irq.Attributes |= (SA_SHIRQ | SA_SAMPLE_RANDOM); + link->irq.Attributes |= IRQF_SHARED; /* General socket configuration */ link->conf.Attributes = CONF_ENABLE_IRQ; diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c index 9f59827707f..0b65099acb1 100644 --- a/drivers/scsi/pcmcia/sym53c500_cs.c +++ b/drivers/scsi/pcmcia/sym53c500_cs.c @@ -799,7 +799,7 @@ next_entry: data = (struct sym53c500_data *)host->hostdata; if (irq_level > 0) { - if (request_irq(irq_level, SYM53C500_intr, SA_SHIRQ, "SYM53C500", host)) { + if (request_irq(irq_level, SYM53C500_intr, IRQF_SHARED, "SYM53C500", host)) { printk("SYM53C500: unable to allocate IRQ %d\n", irq_level); goto err_free_scsi; } diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c deleted file mode 100644 index 7ebe8e03aa9..00000000000 --- a/drivers/scsi/pdc_adma.c +++ /dev/null @@ -1,739 +0,0 @@ -/* - * pdc_adma.c - Pacific Digital Corporation ADMA - * - * Maintained by: Mark Lord <mlord@pobox.com> - * - * Copyright 2005 Mark Lord - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * - * Supports ATA disks in single-packet ADMA mode. - * Uses PIO for everything else. - * - * TODO: Use ADMA transfers for ATAPI devices, when possible. - * This requires careful attention to a number of quirks of the chip. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/blkdev.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/sched.h> -#include <linux/device.h> -#include <scsi/scsi_host.h> -#include <asm/io.h> -#include <linux/libata.h> - -#define DRV_NAME "pdc_adma" -#define DRV_VERSION "0.04" - -/* macro to calculate base address for ATA regs */ -#define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40)) - -/* macro to calculate base address for ADMA regs */ -#define ADMA_REGS(base,port_no) ((base) + 0x80 + ((port_no) * 0x20)) - -enum { - ADMA_PORTS = 2, - ADMA_CPB_BYTES = 40, - ADMA_PRD_BYTES = LIBATA_MAX_PRD * 16, - ADMA_PKT_BYTES = ADMA_CPB_BYTES + ADMA_PRD_BYTES, - - ADMA_DMA_BOUNDARY = 0xffffffff, - - /* global register offsets */ - ADMA_MODE_LOCK = 0x00c7, - - /* per-channel register offsets */ - ADMA_CONTROL = 0x0000, /* ADMA control */ - ADMA_STATUS = 0x0002, /* ADMA status */ - ADMA_CPB_COUNT = 0x0004, /* CPB count */ - ADMA_CPB_CURRENT = 0x000c, /* current CPB address */ - ADMA_CPB_NEXT = 0x000c, /* next CPB address */ - ADMA_CPB_LOOKUP = 0x0010, /* CPB lookup table */ - ADMA_FIFO_IN = 0x0014, /* input FIFO threshold */ - ADMA_FIFO_OUT = 0x0016, /* output FIFO threshold */ - - /* ADMA_CONTROL register bits */ - aNIEN = (1 << 8), /* irq mask: 1==masked */ - aGO = (1 << 7), /* packet trigger ("Go!") */ - aRSTADM = (1 << 5), /* ADMA logic reset */ - aPIOMD4 = 0x0003, /* PIO mode 4 */ - - /* ADMA_STATUS register bits */ - aPSD = (1 << 6), - aUIRQ = (1 << 4), - aPERR = (1 << 0), - - /* CPB bits */ - cDONE = (1 << 0), - cVLD = (1 << 0), - cDAT = (1 << 2), - cIEN = (1 << 3), - - /* PRD bits */ - pORD = (1 << 4), - pDIRO = (1 << 5), - pEND = (1 << 7), - - /* ATA register flags */ - rIGN = (1 << 5), - rEND = (1 << 7), - - /* ATA register addresses */ - ADMA_REGS_CONTROL = 0x0e, - ADMA_REGS_SECTOR_COUNT = 0x12, - ADMA_REGS_LBA_LOW = 0x13, - ADMA_REGS_LBA_MID = 0x14, - ADMA_REGS_LBA_HIGH = 0x15, - ADMA_REGS_DEVICE = 0x16, - ADMA_REGS_COMMAND = 0x17, - - /* PCI device IDs */ - board_1841_idx = 0, /* ADMA 2-port controller */ -}; - -typedef enum { adma_state_idle, adma_state_pkt, adma_state_mmio } adma_state_t; - -struct adma_port_priv { - u8 *pkt; - dma_addr_t pkt_dma; - adma_state_t state; -}; - -static int adma_ata_init_one (struct pci_dev *pdev, - const struct pci_device_id *ent); -static irqreturn_t adma_intr (int irq, void *dev_instance, - struct pt_regs *regs); -static int adma_port_start(struct ata_port *ap); -static void adma_host_stop(struct ata_host_set *host_set); -static void adma_port_stop(struct ata_port *ap); -static void adma_phy_reset(struct ata_port *ap); -static void adma_qc_prep(struct ata_queued_cmd *qc); -static unsigned int adma_qc_issue(struct ata_queued_cmd *qc); -static int adma_check_atapi_dma(struct ata_queued_cmd *qc); -static void adma_bmdma_stop(struct ata_queued_cmd *qc); -static u8 adma_bmdma_status(struct ata_port *ap); -static void adma_irq_clear(struct ata_port *ap); -static void adma_eng_timeout(struct ata_port *ap); - -static struct scsi_host_template adma_ata_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ENABLE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ADMA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - -static const struct ata_port_operations adma_ata_ops = { - .port_disable = ata_port_disable, - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .check_atapi_dma = adma_check_atapi_dma, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - .phy_reset = adma_phy_reset, - .qc_prep = adma_qc_prep, - .qc_issue = adma_qc_issue, - .eng_timeout = adma_eng_timeout, - .data_xfer = ata_mmio_data_xfer, - .irq_handler = adma_intr, - .irq_clear = adma_irq_clear, - .port_start = adma_port_start, - .port_stop = adma_port_stop, - .host_stop = adma_host_stop, - .bmdma_stop = adma_bmdma_stop, - .bmdma_status = adma_bmdma_status, -}; - -static struct ata_port_info adma_port_info[] = { - /* board_1841_idx */ - { - .sht = &adma_ata_sht, - .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | - ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO, - .pio_mask = 0x10, /* pio4 */ - .udma_mask = 0x1f, /* udma0-4 */ - .port_ops = &adma_ata_ops, - }, -}; - -static const struct pci_device_id adma_ata_pci_tbl[] = { - { PCI_VENDOR_ID_PDC, 0x1841, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_1841_idx }, - - { } /* terminate list */ -}; - -static struct pci_driver adma_ata_pci_driver = { - .name = DRV_NAME, - .id_table = adma_ata_pci_tbl, - .probe = adma_ata_init_one, - .remove = ata_pci_remove_one, -}; - -static int adma_check_atapi_dma(struct ata_queued_cmd *qc) -{ - return 1; /* ATAPI DMA not yet supported */ -} - -static void adma_bmdma_stop(struct ata_queued_cmd *qc) -{ - /* nothing */ -} - -static u8 adma_bmdma_status(struct ata_port *ap) -{ - return 0; -} - -static void adma_irq_clear(struct ata_port *ap) -{ - /* nothing */ -} - -static void adma_reset_engine(void __iomem *chan) -{ - /* reset ADMA to idle state */ - writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL); - udelay(2); - writew(aPIOMD4, chan + ADMA_CONTROL); - udelay(2); -} - -static void adma_reinit_engine(struct ata_port *ap) -{ - struct adma_port_priv *pp = ap->private_data; - void __iomem *mmio_base = ap->host_set->mmio_base; - void __iomem *chan = ADMA_REGS(mmio_base, ap->port_no); - - /* mask/clear ATA interrupts */ - writeb(ATA_NIEN, (void __iomem *)ap->ioaddr.ctl_addr); - ata_check_status(ap); - - /* reset the ADMA engine */ - adma_reset_engine(chan); - - /* set in-FIFO threshold to 0x100 */ - writew(0x100, chan + ADMA_FIFO_IN); - - /* set CPB pointer */ - writel((u32)pp->pkt_dma, chan + ADMA_CPB_NEXT); - - /* set out-FIFO threshold to 0x100 */ - writew(0x100, chan + ADMA_FIFO_OUT); - - /* set CPB count */ - writew(1, chan + ADMA_CPB_COUNT); - - /* read/discard ADMA status */ - readb(chan + ADMA_STATUS); -} - -static inline void adma_enter_reg_mode(struct ata_port *ap) -{ - void __iomem *chan = ADMA_REGS(ap->host_set->mmio_base, ap->port_no); - - writew(aPIOMD4, chan + ADMA_CONTROL); - readb(chan + ADMA_STATUS); /* flush */ -} - -static void adma_phy_reset(struct ata_port *ap) -{ - struct adma_port_priv *pp = ap->private_data; - - pp->state = adma_state_idle; - adma_reinit_engine(ap); - ata_port_probe(ap); - ata_bus_reset(ap); -} - -static void adma_eng_timeout(struct ata_port *ap) -{ - struct adma_port_priv *pp = ap->private_data; - - if (pp->state != adma_state_idle) /* healthy paranoia */ - pp->state = adma_state_mmio; - adma_reinit_engine(ap); - ata_eng_timeout(ap); -} - -static int adma_fill_sg(struct ata_queued_cmd *qc) -{ - struct scatterlist *sg; - struct ata_port *ap = qc->ap; - struct adma_port_priv *pp = ap->private_data; - u8 *buf = pp->pkt; - int i = (2 + buf[3]) * 8; - u8 pFLAGS = pORD | ((qc->tf.flags & ATA_TFLAG_WRITE) ? pDIRO : 0); - - ata_for_each_sg(sg, qc) { - u32 addr; - u32 len; - - addr = (u32)sg_dma_address(sg); - *(__le32 *)(buf + i) = cpu_to_le32(addr); - i += 4; - - len = sg_dma_len(sg) >> 3; - *(__le32 *)(buf + i) = cpu_to_le32(len); - i += 4; - - if (ata_sg_is_last(sg, qc)) - pFLAGS |= pEND; - buf[i++] = pFLAGS; - buf[i++] = qc->dev->dma_mode & 0xf; - buf[i++] = 0; /* pPKLW */ - buf[i++] = 0; /* reserved */ - - *(__le32 *)(buf + i) - = (pFLAGS & pEND) ? 0 : cpu_to_le32(pp->pkt_dma + i + 4); - i += 4; - - VPRINTK("PRD[%u] = (0x%lX, 0x%X)\n", i/4, - (unsigned long)addr, len); - } - return i; -} - -static void adma_qc_prep(struct ata_queued_cmd *qc) -{ - struct adma_port_priv *pp = qc->ap->private_data; - u8 *buf = pp->pkt; - u32 pkt_dma = (u32)pp->pkt_dma; - int i = 0; - - VPRINTK("ENTER\n"); - - adma_enter_reg_mode(qc->ap); - if (qc->tf.protocol != ATA_PROT_DMA) { - ata_qc_prep(qc); - return; - } - - buf[i++] = 0; /* Response flags */ - buf[i++] = 0; /* reserved */ - buf[i++] = cVLD | cDAT | cIEN; - i++; /* cLEN, gets filled in below */ - - *(__le32 *)(buf+i) = cpu_to_le32(pkt_dma); /* cNCPB */ - i += 4; /* cNCPB */ - i += 4; /* cPRD, gets filled in below */ - - buf[i++] = 0; /* reserved */ - buf[i++] = 0; /* reserved */ - buf[i++] = 0; /* reserved */ - buf[i++] = 0; /* reserved */ - - /* ATA registers; must be a multiple of 4 */ - buf[i++] = qc->tf.device; - buf[i++] = ADMA_REGS_DEVICE; - if ((qc->tf.flags & ATA_TFLAG_LBA48)) { - buf[i++] = qc->tf.hob_nsect; - buf[i++] = ADMA_REGS_SECTOR_COUNT; - buf[i++] = qc->tf.hob_lbal; - buf[i++] = ADMA_REGS_LBA_LOW; - buf[i++] = qc->tf.hob_lbam; - buf[i++] = ADMA_REGS_LBA_MID; - buf[i++] = qc->tf.hob_lbah; - buf[i++] = ADMA_REGS_LBA_HIGH; - } - buf[i++] = qc->tf.nsect; - buf[i++] = ADMA_REGS_SECTOR_COUNT; - buf[i++] = qc->tf.lbal; - buf[i++] = ADMA_REGS_LBA_LOW; - buf[i++] = qc->tf.lbam; - buf[i++] = ADMA_REGS_LBA_MID; - buf[i++] = qc->tf.lbah; - buf[i++] = ADMA_REGS_LBA_HIGH; - buf[i++] = 0; - buf[i++] = ADMA_REGS_CONTROL; - buf[i++] = rIGN; - buf[i++] = 0; - buf[i++] = qc->tf.command; - buf[i++] = ADMA_REGS_COMMAND | rEND; - - buf[3] = (i >> 3) - 2; /* cLEN */ - *(__le32 *)(buf+8) = cpu_to_le32(pkt_dma + i); /* cPRD */ - - i = adma_fill_sg(qc); - wmb(); /* flush PRDs and pkt to memory */ -#if 0 - /* dump out CPB + PRDs for debug */ - { - int j, len = 0; - static char obuf[2048]; - for (j = 0; j < i; ++j) { - len += sprintf(obuf+len, "%02x ", buf[j]); - if ((j & 7) == 7) { - printk("%s\n", obuf); - len = 0; - } - } - if (len) - printk("%s\n", obuf); - } -#endif -} - -static inline void adma_packet_start(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - void __iomem *chan = ADMA_REGS(ap->host_set->mmio_base, ap->port_no); - - VPRINTK("ENTER, ap %p\n", ap); - - /* fire up the ADMA engine */ - writew(aPIOMD4 | aGO, chan + ADMA_CONTROL); -} - -static unsigned int adma_qc_issue(struct ata_queued_cmd *qc) -{ - struct adma_port_priv *pp = qc->ap->private_data; - - switch (qc->tf.protocol) { - case ATA_PROT_DMA: - pp->state = adma_state_pkt; - adma_packet_start(qc); - return 0; - - case ATA_PROT_ATAPI_DMA: - BUG(); - break; - - default: - break; - } - - pp->state = adma_state_mmio; - return ata_qc_issue_prot(qc); -} - -static inline unsigned int adma_intr_pkt(struct ata_host_set *host_set) -{ - unsigned int handled = 0, port_no; - u8 __iomem *mmio_base = host_set->mmio_base; - - for (port_no = 0; port_no < host_set->n_ports; ++port_no) { - struct ata_port *ap = host_set->ports[port_no]; - struct adma_port_priv *pp; - struct ata_queued_cmd *qc; - void __iomem *chan = ADMA_REGS(mmio_base, port_no); - u8 status = readb(chan + ADMA_STATUS); - - if (status == 0) - continue; - handled = 1; - adma_enter_reg_mode(ap); - if (ap->flags & ATA_FLAG_DISABLED) - continue; - pp = ap->private_data; - if (!pp || pp->state != adma_state_pkt) - continue; - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { - if ((status & (aPERR | aPSD | aUIRQ))) - qc->err_mask |= AC_ERR_OTHER; - else if (pp->pkt[0] != cDONE) - qc->err_mask |= AC_ERR_OTHER; - - ata_qc_complete(qc); - } - } - return handled; -} - -static inline unsigned int adma_intr_mmio(struct ata_host_set *host_set) -{ - unsigned int handled = 0, port_no; - - for (port_no = 0; port_no < host_set->n_ports; ++port_no) { - struct ata_port *ap; - ap = host_set->ports[port_no]; - if (ap && (!(ap->flags & ATA_FLAG_DISABLED))) { - struct ata_queued_cmd *qc; - struct adma_port_priv *pp = ap->private_data; - if (!pp || pp->state != adma_state_mmio) - continue; - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { - - /* check main status, clearing INTRQ */ - u8 status = ata_check_status(ap); - if ((status & ATA_BUSY)) - continue; - DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", - ap->id, qc->tf.protocol, status); - - /* complete taskfile transaction */ - pp->state = adma_state_idle; - qc->err_mask |= ac_err_mask(status); - ata_qc_complete(qc); - handled = 1; - } - } - } - return handled; -} - -static irqreturn_t adma_intr(int irq, void *dev_instance, struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - unsigned int handled = 0; - - VPRINTK("ENTER\n"); - - spin_lock(&host_set->lock); - handled = adma_intr_pkt(host_set) | adma_intr_mmio(host_set); - spin_unlock(&host_set->lock); - - VPRINTK("EXIT\n"); - - return IRQ_RETVAL(handled); -} - -static void adma_ata_setup_port(struct ata_ioports *port, unsigned long base) -{ - port->cmd_addr = - port->data_addr = base + 0x000; - port->error_addr = - port->feature_addr = base + 0x004; - port->nsect_addr = base + 0x008; - port->lbal_addr = base + 0x00c; - port->lbam_addr = base + 0x010; - port->lbah_addr = base + 0x014; - port->device_addr = base + 0x018; - port->status_addr = - port->command_addr = base + 0x01c; - port->altstatus_addr = - port->ctl_addr = base + 0x038; -} - -static int adma_port_start(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct adma_port_priv *pp; - int rc; - - rc = ata_port_start(ap); - if (rc) - return rc; - adma_enter_reg_mode(ap); - rc = -ENOMEM; - pp = kcalloc(1, sizeof(*pp), GFP_KERNEL); - if (!pp) - goto err_out; - pp->pkt = dma_alloc_coherent(dev, ADMA_PKT_BYTES, &pp->pkt_dma, - GFP_KERNEL); - if (!pp->pkt) - goto err_out_kfree; - /* paranoia? */ - if ((pp->pkt_dma & 7) != 0) { - printk("bad alignment for pp->pkt_dma: %08x\n", - (u32)pp->pkt_dma); - dma_free_coherent(dev, ADMA_PKT_BYTES, - pp->pkt, pp->pkt_dma); - goto err_out_kfree; - } - memset(pp->pkt, 0, ADMA_PKT_BYTES); - ap->private_data = pp; - adma_reinit_engine(ap); - return 0; - -err_out_kfree: - kfree(pp); -err_out: - ata_port_stop(ap); - return rc; -} - -static void adma_port_stop(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct adma_port_priv *pp = ap->private_data; - - adma_reset_engine(ADMA_REGS(ap->host_set->mmio_base, ap->port_no)); - if (pp != NULL) { - ap->private_data = NULL; - if (pp->pkt != NULL) - dma_free_coherent(dev, ADMA_PKT_BYTES, - pp->pkt, pp->pkt_dma); - kfree(pp); - } - ata_port_stop(ap); -} - -static void adma_host_stop(struct ata_host_set *host_set) -{ - unsigned int port_no; - - for (port_no = 0; port_no < ADMA_PORTS; ++port_no) - adma_reset_engine(ADMA_REGS(host_set->mmio_base, port_no)); - - ata_pci_host_stop(host_set); -} - -static void adma_host_init(unsigned int chip_id, - struct ata_probe_ent *probe_ent) -{ - unsigned int port_no; - void __iomem *mmio_base = probe_ent->mmio_base; - - /* enable/lock aGO operation */ - writeb(7, mmio_base + ADMA_MODE_LOCK); - - /* reset the ADMA logic */ - for (port_no = 0; port_no < ADMA_PORTS; ++port_no) - adma_reset_engine(ADMA_REGS(mmio_base, port_no)); -} - -static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base) -{ - int rc; - - rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit DMA enable failed\n"); - return rc; - } - rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit consistent DMA enable failed\n"); - return rc; - } - return 0; -} - -static int adma_ata_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - static int printed_version; - struct ata_probe_ent *probe_ent = NULL; - void __iomem *mmio_base; - unsigned int board_idx = (unsigned int) ent->driver_data; - int rc, port_no; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) - goto err_out; - - if ((pci_resource_flags(pdev, 4) & IORESOURCE_MEM) == 0) { - rc = -ENODEV; - goto err_out_regions; - } - - mmio_base = pci_iomap(pdev, 4, 0); - if (mmio_base == NULL) { - rc = -ENOMEM; - goto err_out_regions; - } - - rc = adma_set_dma_masks(pdev, mmio_base); - if (rc) - goto err_out_iounmap; - - probe_ent = kcalloc(1, sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) { - rc = -ENOMEM; - goto err_out_iounmap; - } - - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - probe_ent->sht = adma_port_info[board_idx].sht; - probe_ent->host_flags = adma_port_info[board_idx].host_flags; - probe_ent->pio_mask = adma_port_info[board_idx].pio_mask; - probe_ent->mwdma_mask = adma_port_info[board_idx].mwdma_mask; - probe_ent->udma_mask = adma_port_info[board_idx].udma_mask; - probe_ent->port_ops = adma_port_info[board_idx].port_ops; - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = SA_SHIRQ; - probe_ent->mmio_base = mmio_base; - probe_ent->n_ports = ADMA_PORTS; - - for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) { - adma_ata_setup_port(&probe_ent->port[port_no], - ADMA_ATA_REGS((unsigned long)mmio_base, port_no)); - } - - pci_set_master(pdev); - - /* initialize adapter */ - adma_host_init(board_idx, probe_ent); - - rc = ata_device_add(probe_ent); - kfree(probe_ent); - if (rc != ADMA_PORTS) - goto err_out_iounmap; - return 0; - -err_out_iounmap: - pci_iounmap(pdev, mmio_base); -err_out_regions: - pci_release_regions(pdev); -err_out: - pci_disable_device(pdev); - return rc; -} - -static int __init adma_ata_init(void) -{ - return pci_module_init(&adma_ata_pci_driver); -} - -static void __exit adma_ata_exit(void) -{ - pci_unregister_driver(&adma_ata_pci_driver); -} - -MODULE_AUTHOR("Mark Lord"); -MODULE_DESCRIPTION("Pacific Digital Corporation ADMA low-level driver"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, adma_ata_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -module_init(adma_ata_init); -module_exit(adma_ata_exit); diff --git a/drivers/scsi/pluto.c b/drivers/scsi/pluto.c index 83a67179993..0bd9c60e645 100644 --- a/drivers/scsi/pluto.c +++ b/drivers/scsi/pluto.c @@ -13,7 +13,6 @@ #include <linux/proc_fs.h> #include <linux/stat.h> #include <linux/init.h> -#include <linux/config.h> #ifdef CONFIG_KMOD #include <linux/kmod.h> #endif @@ -170,8 +169,6 @@ int __init pluto_detect(struct scsi_host_template *tpnt) SCpnt->request->rq_status = RQ_SCSI_BUSY; SCpnt->done = pluto_detect_done; - SCpnt->bufflen = 256; - SCpnt->buffer = fcs[i].inquiry; SCpnt->request_bufflen = 256; SCpnt->request_buffer = fcs[i].inquiry; PLD(("set up %d %08lx\n", i, (long)SCpnt)) diff --git a/drivers/scsi/ppa.c b/drivers/scsi/ppa.c index 108910f512e..b0eba39f208 100644 --- a/drivers/scsi/ppa.c +++ b/drivers/scsi/ppa.c @@ -6,11 +6,8 @@ * (c) 1995,1996 Grant R. Guenther, grant@torque.net, * under the terms of the GNU General Public License. * - * Current Maintainer: David Campbell (Perth, Western Australia, GMT+0800) - * campbell@torque.net */ -#include <linux/config.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> diff --git a/drivers/scsi/ppa.h b/drivers/scsi/ppa.h index f6e1a1574bb..7511df3588e 100644 --- a/drivers/scsi/ppa.h +++ b/drivers/scsi/ppa.h @@ -2,7 +2,7 @@ * the Iomega ZIP drive * * (c) 1996 Grant R. Guenther grant@torque.net - * David Campbell campbell@torque.net + * David Campbell * * All comments to David. */ diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index 680f6063954..8953991462d 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -192,7 +192,7 @@ - Don't walk the entire list in qla1280_putq_t() just to directly grab the pointer to the last element afterwards Rev 3.23.5 Beta August 9, 2001, Jes Sorensen - - Don't use SA_INTERRUPT, it's use is deprecated for this kinda driver + - Don't use IRQF_DISABLED, it's use is deprecated for this kinda driver Rev 3.23.4 Beta August 8, 2001, Jes Sorensen - Set dev->max_sectors to 1024 Rev 3.23.3 Beta August 6, 2001, Jes Sorensen @@ -331,7 +331,6 @@ *****************************************************************************/ -#include <linux/config.h> #include <linux/module.h> #include <linux/version.h> @@ -4210,7 +4209,7 @@ qla1280_setup(char *s) } -static int +static int __init qla1280_get_token(char *str) { char *sep; @@ -4370,7 +4369,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) /* Disable ISP interrupts. */ qla1280_disable_intrs(ha); - if (request_irq(pdev->irq, qla1280_intr_handler, SA_SHIRQ, + if (request_irq(pdev->irq, qla1280_intr_handler, IRQF_SHARED, "qla1280", ha)) { printk("qla1280 : Failed to reserve interrupt %d already " "in use\n", pdev->irq); diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index e96d58ded57..87f90c4f08e 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -16,15 +16,16 @@ qla2x00_sysfs_read_fw_dump(struct kobject *kobj, char *buf, loff_t off, { struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj, struct device, kobj))); + char *rbuf = (char *)ha->fw_dump; if (ha->fw_dump_reading == 0) return 0; - if (off > ha->fw_dump_buffer_len) - return 0; - if (off + count > ha->fw_dump_buffer_len) - count = ha->fw_dump_buffer_len - off; + if (off > ha->fw_dump_len) + return 0; + if (off + count > ha->fw_dump_len) + count = ha->fw_dump_len - off; - memcpy(buf, &ha->fw_dump_buffer[off], count); + memcpy(buf, &rbuf[off], count); return (count); } @@ -36,7 +37,6 @@ qla2x00_sysfs_write_fw_dump(struct kobject *kobj, char *buf, loff_t off, struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj, struct device, kobj))); int reading; - uint32_t dump_size; if (off != 0) return (0); @@ -44,46 +44,27 @@ qla2x00_sysfs_write_fw_dump(struct kobject *kobj, char *buf, loff_t off, reading = simple_strtol(buf, NULL, 10); switch (reading) { case 0: - if (ha->fw_dump_reading == 1) { - qla_printk(KERN_INFO, ha, - "Firmware dump cleared on (%ld).\n", ha->host_no); + if (!ha->fw_dump_reading) + break; - vfree(ha->fw_dump_buffer); - ha->fw_dump_buffer = NULL; - ha->fw_dump_reading = 0; - ha->fw_dumped = 0; - } + qla_printk(KERN_INFO, ha, + "Firmware dump cleared on (%ld).\n", ha->host_no); + + ha->fw_dump_reading = 0; + ha->fw_dumped = 0; break; case 1: if (ha->fw_dumped && !ha->fw_dump_reading) { ha->fw_dump_reading = 1; - if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) - dump_size = FW_DUMP_SIZE_24XX; - else { - dump_size = FW_DUMP_SIZE_1M; - if (ha->fw_memory_size < 0x20000) - dump_size = FW_DUMP_SIZE_128K; - else if (ha->fw_memory_size < 0x80000) - dump_size = FW_DUMP_SIZE_512K; - } - ha->fw_dump_buffer = (char *)vmalloc(dump_size); - if (ha->fw_dump_buffer == NULL) { - qla_printk(KERN_WARNING, ha, - "Unable to allocate memory for firmware " - "dump buffer (%d).\n", dump_size); - - ha->fw_dump_reading = 0; - return (count); - } qla_printk(KERN_INFO, ha, - "Firmware dump ready for read on (%ld).\n", + "Raw firmware dump ready for read on (%ld).\n", ha->host_no); - memset(ha->fw_dump_buffer, 0, dump_size); - ha->isp_ops.ascii_fw_dump(ha); - ha->fw_dump_buffer_len = strlen(ha->fw_dump_buffer); } break; + case 2: + qla2x00_alloc_fw_dump(ha); + break; } return (count); } @@ -313,9 +294,6 @@ qla2x00_sysfs_read_vpd(struct kobject *kobj, char *buf, loff_t off, if (!capable(CAP_SYS_ADMIN) || off != 0) return 0; - if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha)) - return -ENOTSUPP; - /* Read NVRAM. */ spin_lock_irqsave(&ha->hardware_lock, flags); ha->isp_ops.read_nvram(ha, (uint8_t *)buf, ha->vpd_base, ha->vpd_size); @@ -335,9 +313,6 @@ qla2x00_sysfs_write_vpd(struct kobject *kobj, char *buf, loff_t off, if (!capable(CAP_SYS_ADMIN) || off != 0 || count != ha->vpd_size) return 0; - if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha)) - return -ENOTSUPP; - /* Write NVRAM. */ spin_lock_irqsave(&ha->hardware_lock, flags); ha->isp_ops.write_nvram(ha, (uint8_t *)buf, ha->vpd_base, count); @@ -357,6 +332,53 @@ static struct bin_attribute sysfs_vpd_attr = { .write = qla2x00_sysfs_write_vpd, }; +static ssize_t +qla2x00_sysfs_read_sfp(struct kobject *kobj, char *buf, loff_t off, + size_t count) +{ + struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj, + struct device, kobj))); + uint16_t iter, addr, offset; + int rval; + + if (!capable(CAP_SYS_ADMIN) || off != 0 || count != SFP_DEV_SIZE * 2) + return 0; + + addr = 0xa0; + for (iter = 0, offset = 0; iter < (SFP_DEV_SIZE * 2) / SFP_BLOCK_SIZE; + iter++, offset += SFP_BLOCK_SIZE) { + if (iter == 4) { + /* Skip to next device address. */ + addr = 0xa2; + offset = 0; + } + + rval = qla2x00_read_sfp(ha, ha->sfp_data_dma, addr, offset, + SFP_BLOCK_SIZE); + if (rval != QLA_SUCCESS) { + qla_printk(KERN_WARNING, ha, + "Unable to read SFP data (%x/%x/%x).\n", rval, + addr, offset); + count = 0; + break; + } + memcpy(buf, ha->sfp_data, SFP_BLOCK_SIZE); + buf += SFP_BLOCK_SIZE; + } + + return count; +} + +static struct bin_attribute sysfs_sfp_attr = { + .attr = { + .name = "sfp", + .mode = S_IRUSR | S_IWUSR, + .owner = THIS_MODULE, + }, + .size = SFP_DEV_SIZE * 2, + .read = qla2x00_sysfs_read_sfp, +}; + void qla2x00_alloc_sysfs_attr(scsi_qla_host_t *ha) { @@ -367,7 +389,12 @@ qla2x00_alloc_sysfs_attr(scsi_qla_host_t *ha) sysfs_create_bin_file(&host->shost_gendev.kobj, &sysfs_optrom_attr); sysfs_create_bin_file(&host->shost_gendev.kobj, &sysfs_optrom_ctl_attr); - sysfs_create_bin_file(&host->shost_gendev.kobj, &sysfs_vpd_attr); + if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) { + sysfs_create_bin_file(&host->shost_gendev.kobj, + &sysfs_vpd_attr); + sysfs_create_bin_file(&host->shost_gendev.kobj, + &sysfs_sfp_attr); + } } void @@ -380,7 +407,12 @@ qla2x00_free_sysfs_attr(scsi_qla_host_t *ha) sysfs_remove_bin_file(&host->shost_gendev.kobj, &sysfs_optrom_attr); sysfs_remove_bin_file(&host->shost_gendev.kobj, &sysfs_optrom_ctl_attr); - sysfs_remove_bin_file(&host->shost_gendev.kobj, &sysfs_vpd_attr); + if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) { + sysfs_remove_bin_file(&host->shost_gendev.kobj, + &sysfs_vpd_attr); + sysfs_remove_bin_file(&host->shost_gendev.kobj, + &sysfs_sfp_attr); + } if (ha->beacon_blink_led == 1) ha->isp_ops.beacon_off(ha); diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 74e54713aa7..f6ed6962bc2 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -8,7 +8,34 @@ #include <linux/delay.h> -static int qla_uprintf(char **, char *, ...); +static inline void +qla2xxx_prep_dump(scsi_qla_host_t *ha, struct qla2xxx_fw_dump *fw_dump) +{ + fw_dump->fw_major_version = htonl(ha->fw_major_version); + fw_dump->fw_minor_version = htonl(ha->fw_minor_version); + fw_dump->fw_subminor_version = htonl(ha->fw_subminor_version); + fw_dump->fw_attributes = htonl(ha->fw_attributes); + + fw_dump->vendor = htonl(ha->pdev->vendor); + fw_dump->device = htonl(ha->pdev->device); + fw_dump->subsystem_vendor = htonl(ha->pdev->subsystem_vendor); + fw_dump->subsystem_device = htonl(ha->pdev->subsystem_device); +} + +static inline void * +qla2xxx_copy_queues(scsi_qla_host_t *ha, void *ptr) +{ + /* Request queue. */ + memcpy(ptr, ha->request_ring, ha->request_q_length * + sizeof(request_t)); + + /* Response queue. */ + ptr += ha->request_q_length * sizeof(request_t); + memcpy(ptr, ha->response_ring, ha->response_q_length * + sizeof(response_t)); + + return ptr + (ha->response_q_length * sizeof(response_t)); +} /** * qla2300_fw_dump() - Dumps binary data from the 2300 firmware. @@ -49,10 +76,11 @@ qla2300_fw_dump(scsi_qla_host_t *ha, int hardware_locked) "request...\n", ha->fw_dump); goto qla2300_fw_dump_failed; } - fw = ha->fw_dump; + fw = &ha->fw_dump->isp.isp23; + qla2xxx_prep_dump(ha, ha->fw_dump); rval = QLA_SUCCESS; - fw->hccr = RD_REG_WORD(®->hccr); + fw->hccr = htons(RD_REG_WORD(®->hccr)); /* Pause RISC. */ WRT_REG_WORD(®->hccr, HCCR_PAUSE_RISC); @@ -73,85 +101,86 @@ qla2300_fw_dump(scsi_qla_host_t *ha, int hardware_locked) if (rval == QLA_SUCCESS) { dmp_reg = (uint16_t __iomem *)(reg + 0); for (cnt = 0; cnt < sizeof(fw->pbiu_reg) / 2; cnt++) - fw->pbiu_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->pbiu_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x10); for (cnt = 0; cnt < sizeof(fw->risc_host_reg) / 2; cnt++) - fw->risc_host_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->risc_host_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x40); for (cnt = 0; cnt < sizeof(fw->mailbox_reg) / 2; cnt++) - fw->mailbox_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->mailbox_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->ctrl_status, 0x40); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->resp_dma_reg) / 2; cnt++) - fw->resp_dma_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->resp_dma_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->ctrl_status, 0x50); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->dma_reg) / 2; cnt++) - fw->dma_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->dma_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->ctrl_status, 0x00); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0xA0); for (cnt = 0; cnt < sizeof(fw->risc_hdw_reg) / 2; cnt++) - fw->risc_hdw_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->risc_hdw_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->pcr, 0x2000); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->risc_gp0_reg) / 2; cnt++) - fw->risc_gp0_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->risc_gp0_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->pcr, 0x2200); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->risc_gp1_reg) / 2; cnt++) - fw->risc_gp1_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->risc_gp1_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->pcr, 0x2400); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->risc_gp2_reg) / 2; cnt++) - fw->risc_gp2_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->risc_gp2_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->pcr, 0x2600); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->risc_gp3_reg) / 2; cnt++) - fw->risc_gp3_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->risc_gp3_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->pcr, 0x2800); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->risc_gp4_reg) / 2; cnt++) - fw->risc_gp4_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->risc_gp4_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->pcr, 0x2A00); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->risc_gp5_reg) / 2; cnt++) - fw->risc_gp5_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->risc_gp5_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->pcr, 0x2C00); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->risc_gp6_reg) / 2; cnt++) - fw->risc_gp6_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->risc_gp6_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->pcr, 0x2E00); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->risc_gp7_reg) / 2; cnt++) - fw->risc_gp7_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->risc_gp7_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->ctrl_status, 0x10); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->frame_buf_hdw_reg) / 2; cnt++) - fw->frame_buf_hdw_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->frame_buf_hdw_reg[cnt] = + htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->ctrl_status, 0x20); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->fpm_b0_reg) / 2; cnt++) - fw->fpm_b0_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->fpm_b0_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->ctrl_status, 0x30); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->fpm_b1_reg) / 2; cnt++) - fw->fpm_b1_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->fpm_b1_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); /* Reset RISC. */ WRT_REG_WORD(®->ctrl_status, CSR_ISP_SOFT_RESET); @@ -226,7 +255,7 @@ qla2300_fw_dump(scsi_qla_host_t *ha, int hardware_locked) if (test_and_clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags)) { rval = mb0 & MBS_MASK; - fw->risc_ram[cnt] = mb2; + fw->risc_ram[cnt] = htons(mb2); } else { rval = QLA_FUNCTION_FAILED; } @@ -285,7 +314,7 @@ qla2300_fw_dump(scsi_qla_host_t *ha, int hardware_locked) if (test_and_clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags)) { rval = mb0 & MBS_MASK; - fw->stack_ram[cnt] = mb2; + fw->stack_ram[cnt] = htons(mb2); } else { rval = QLA_FUNCTION_FAILED; } @@ -345,12 +374,15 @@ qla2300_fw_dump(scsi_qla_host_t *ha, int hardware_locked) if (test_and_clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags)) { rval = mb0 & MBS_MASK; - fw->data_ram[cnt] = mb2; + fw->data_ram[cnt] = htons(mb2); } else { rval = QLA_FUNCTION_FAILED; } } + if (rval == QLA_SUCCESS) + qla2xxx_copy_queues(ha, &fw->data_ram[cnt]); + if (rval != QLA_SUCCESS) { qla_printk(KERN_WARNING, ha, "Failed to dump firmware (%x)!!!\n", rval); @@ -369,193 +401,6 @@ qla2300_fw_dump_failed: } /** - * qla2300_ascii_fw_dump() - Converts a binary firmware dump to ASCII. - * @ha: HA context - */ -void -qla2300_ascii_fw_dump(scsi_qla_host_t *ha) -{ - uint32_t cnt; - char *uiter; - char fw_info[30]; - struct qla2300_fw_dump *fw; - uint32_t data_ram_cnt; - - uiter = ha->fw_dump_buffer; - fw = ha->fw_dump; - - qla_uprintf(&uiter, "%s Firmware Version %s\n", ha->model_number, - ha->isp_ops.fw_version_str(ha, fw_info)); - - qla_uprintf(&uiter, "\n[==>BEG]\n"); - - qla_uprintf(&uiter, "HCCR Register:\n%04x\n\n", fw->hccr); - - qla_uprintf(&uiter, "PBIU Registers:"); - for (cnt = 0; cnt < sizeof (fw->pbiu_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->pbiu_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nReqQ-RspQ-Risc2Host Status registers:"); - for (cnt = 0; cnt < sizeof (fw->risc_host_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->risc_host_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nMailbox Registers:"); - for (cnt = 0; cnt < sizeof (fw->mailbox_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->mailbox_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nAuto Request Response DMA Registers:"); - for (cnt = 0; cnt < sizeof (fw->resp_dma_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->resp_dma_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nDMA Registers:"); - for (cnt = 0; cnt < sizeof (fw->dma_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->dma_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRISC Hardware Registers:"); - for (cnt = 0; cnt < sizeof (fw->risc_hdw_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->risc_hdw_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRISC GP0 Registers:"); - for (cnt = 0; cnt < sizeof (fw->risc_gp0_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->risc_gp0_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRISC GP1 Registers:"); - for (cnt = 0; cnt < sizeof (fw->risc_gp1_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->risc_gp1_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRISC GP2 Registers:"); - for (cnt = 0; cnt < sizeof (fw->risc_gp2_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->risc_gp2_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRISC GP3 Registers:"); - for (cnt = 0; cnt < sizeof (fw->risc_gp3_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->risc_gp3_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRISC GP4 Registers:"); - for (cnt = 0; cnt < sizeof (fw->risc_gp4_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->risc_gp4_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRISC GP5 Registers:"); - for (cnt = 0; cnt < sizeof (fw->risc_gp5_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->risc_gp5_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRISC GP6 Registers:"); - for (cnt = 0; cnt < sizeof (fw->risc_gp6_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->risc_gp6_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRISC GP7 Registers:"); - for (cnt = 0; cnt < sizeof (fw->risc_gp7_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->risc_gp7_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nFrame Buffer Hardware Registers:"); - for (cnt = 0; cnt < sizeof (fw->frame_buf_hdw_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->frame_buf_hdw_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nFPM B0 Registers:"); - for (cnt = 0; cnt < sizeof (fw->fpm_b0_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->fpm_b0_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nFPM B1 Registers:"); - for (cnt = 0; cnt < sizeof (fw->fpm_b1_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->fpm_b1_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nCode RAM Dump:"); - for (cnt = 0; cnt < sizeof (fw->risc_ram) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n%04x: ", cnt + 0x0800); - } - qla_uprintf(&uiter, "%04x ", fw->risc_ram[cnt]); - } - - qla_uprintf(&uiter, "\n\nStack RAM Dump:"); - for (cnt = 0; cnt < sizeof (fw->stack_ram) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n%05x: ", cnt + 0x10000); - } - qla_uprintf(&uiter, "%04x ", fw->stack_ram[cnt]); - } - - qla_uprintf(&uiter, "\n\nData RAM Dump:"); - data_ram_cnt = ha->fw_memory_size - 0x11000 + 1; - for (cnt = 0; cnt < data_ram_cnt; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n%05x: ", cnt + 0x11000); - } - qla_uprintf(&uiter, "%04x ", fw->data_ram[cnt]); - } - - qla_uprintf(&uiter, "\n\n[<==END] ISP Debug Dump."); -} - -/** * qla2100_fw_dump() - Dumps binary data from the 2100/2200 firmware. * @ha: HA context * @hardware_locked: Called with the hardware_lock @@ -591,10 +436,11 @@ qla2100_fw_dump(scsi_qla_host_t *ha, int hardware_locked) "request...\n", ha->fw_dump); goto qla2100_fw_dump_failed; } - fw = ha->fw_dump; + fw = &ha->fw_dump->isp.isp21; + qla2xxx_prep_dump(ha, ha->fw_dump); rval = QLA_SUCCESS; - fw->hccr = RD_REG_WORD(®->hccr); + fw->hccr = htons(RD_REG_WORD(®->hccr)); /* Pause RISC. */ WRT_REG_WORD(®->hccr, HCCR_PAUSE_RISC); @@ -608,79 +454,81 @@ qla2100_fw_dump(scsi_qla_host_t *ha, int hardware_locked) if (rval == QLA_SUCCESS) { dmp_reg = (uint16_t __iomem *)(reg + 0); for (cnt = 0; cnt < sizeof(fw->pbiu_reg) / 2; cnt++) - fw->pbiu_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->pbiu_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x10); for (cnt = 0; cnt < ha->mbx_count; cnt++) { if (cnt == 8) { - dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0xe0); + dmp_reg = (uint16_t __iomem *) + ((uint8_t __iomem *)reg + 0xe0); } - fw->mailbox_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->mailbox_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); } dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x20); for (cnt = 0; cnt < sizeof(fw->dma_reg) / 2; cnt++) - fw->dma_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->dma_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->ctrl_status, 0x00); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0xA0); for (cnt = 0; cnt < sizeof(fw->risc_hdw_reg) / 2; cnt++) - fw->risc_hdw_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->risc_hdw_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->pcr, 0x2000); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->risc_gp0_reg) / 2; cnt++) - fw->risc_gp0_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->risc_gp0_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->pcr, 0x2100); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->risc_gp1_reg) / 2; cnt++) - fw->risc_gp1_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->risc_gp1_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->pcr, 0x2200); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->risc_gp2_reg) / 2; cnt++) - fw->risc_gp2_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->risc_gp2_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->pcr, 0x2300); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->risc_gp3_reg) / 2; cnt++) - fw->risc_gp3_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->risc_gp3_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->pcr, 0x2400); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->risc_gp4_reg) / 2; cnt++) - fw->risc_gp4_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->risc_gp4_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->pcr, 0x2500); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->risc_gp5_reg) / 2; cnt++) - fw->risc_gp5_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->risc_gp5_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->pcr, 0x2600); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->risc_gp6_reg) / 2; cnt++) - fw->risc_gp6_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->risc_gp6_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->pcr, 0x2700); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->risc_gp7_reg) / 2; cnt++) - fw->risc_gp7_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->risc_gp7_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->ctrl_status, 0x10); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->frame_buf_hdw_reg) / 2; cnt++) - fw->frame_buf_hdw_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->frame_buf_hdw_reg[cnt] = + htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->ctrl_status, 0x20); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->fpm_b0_reg) / 2; cnt++) - fw->fpm_b0_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->fpm_b0_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); WRT_REG_WORD(®->ctrl_status, 0x30); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->fpm_b1_reg) / 2; cnt++) - fw->fpm_b1_reg[cnt] = RD_REG_WORD(dmp_reg++); + fw->fpm_b1_reg[cnt] = htons(RD_REG_WORD(dmp_reg++)); /* Reset the ISP. */ WRT_REG_WORD(®->ctrl_status, CSR_ISP_SOFT_RESET); @@ -755,12 +603,15 @@ qla2100_fw_dump(scsi_qla_host_t *ha, int hardware_locked) if (test_and_clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags)) { rval = mb0 & MBS_MASK; - fw->risc_ram[cnt] = mb2; + fw->risc_ram[cnt] = htons(mb2); } else { rval = QLA_FUNCTION_FAILED; } } + if (rval == QLA_SUCCESS) + qla2xxx_copy_queues(ha, &fw->risc_ram[cnt]); + if (rval != QLA_SUCCESS) { qla_printk(KERN_WARNING, ha, "Failed to dump firmware (%x)!!!\n", rval); @@ -778,179 +629,6 @@ qla2100_fw_dump_failed: spin_unlock_irqrestore(&ha->hardware_lock, flags); } -/** - * qla2100_ascii_fw_dump() - Converts a binary firmware dump to ASCII. - * @ha: HA context - */ -void -qla2100_ascii_fw_dump(scsi_qla_host_t *ha) -{ - uint32_t cnt; - char *uiter; - char fw_info[30]; - struct qla2100_fw_dump *fw; - - uiter = ha->fw_dump_buffer; - fw = ha->fw_dump; - - qla_uprintf(&uiter, "%s Firmware Version %s\n", ha->model_number, - ha->isp_ops.fw_version_str(ha, fw_info)); - - qla_uprintf(&uiter, "\n[==>BEG]\n"); - - qla_uprintf(&uiter, "HCCR Register:\n%04x\n\n", fw->hccr); - - qla_uprintf(&uiter, "PBIU Registers:"); - for (cnt = 0; cnt < sizeof (fw->pbiu_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->pbiu_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nMailbox Registers:"); - for (cnt = 0; cnt < sizeof (fw->mailbox_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->mailbox_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nDMA Registers:"); - for (cnt = 0; cnt < sizeof (fw->dma_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->dma_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRISC Hardware Registers:"); - for (cnt = 0; cnt < sizeof (fw->risc_hdw_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->risc_hdw_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRISC GP0 Registers:"); - for (cnt = 0; cnt < sizeof (fw->risc_gp0_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->risc_gp0_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRISC GP1 Registers:"); - for (cnt = 0; cnt < sizeof (fw->risc_gp1_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->risc_gp1_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRISC GP2 Registers:"); - for (cnt = 0; cnt < sizeof (fw->risc_gp2_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->risc_gp2_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRISC GP3 Registers:"); - for (cnt = 0; cnt < sizeof (fw->risc_gp3_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->risc_gp3_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRISC GP4 Registers:"); - for (cnt = 0; cnt < sizeof (fw->risc_gp4_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->risc_gp4_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRISC GP5 Registers:"); - for (cnt = 0; cnt < sizeof (fw->risc_gp5_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->risc_gp5_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRISC GP6 Registers:"); - for (cnt = 0; cnt < sizeof (fw->risc_gp6_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->risc_gp6_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRISC GP7 Registers:"); - for (cnt = 0; cnt < sizeof (fw->risc_gp7_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->risc_gp7_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nFrame Buffer Hardware Registers:"); - for (cnt = 0; cnt < sizeof (fw->frame_buf_hdw_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->frame_buf_hdw_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nFPM B0 Registers:"); - for (cnt = 0; cnt < sizeof (fw->fpm_b0_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->fpm_b0_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nFPM B1 Registers:"); - for (cnt = 0; cnt < sizeof (fw->fpm_b1_reg) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n"); - } - qla_uprintf(&uiter, "%04x ", fw->fpm_b1_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRISC SRAM:"); - for (cnt = 0; cnt < sizeof (fw->risc_ram) / 2; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n%04x: ", cnt + 0x1000); - } - qla_uprintf(&uiter, "%04x ", fw->risc_ram[cnt]); - } - - qla_uprintf(&uiter, "\n\n[<==END] ISP Debug Dump."); - - return; -} - -static int -qla_uprintf(char **uiter, char *fmt, ...) -{ - int iter, len; - char buf[128]; - va_list args; - - va_start(args, fmt); - len = vsprintf(buf, fmt, args); - va_end(args); - - for (iter = 0; iter < len; iter++, *uiter += 1) - *uiter[0] = buf[iter]; - - return (len); -} - - void qla24xx_fw_dump(scsi_qla_host_t *ha, int hardware_locked) { @@ -967,6 +645,7 @@ qla24xx_fw_dump(scsi_qla_host_t *ha, int hardware_locked) unsigned long flags; struct qla24xx_fw_dump *fw; uint32_t ext_mem_cnt; + void *eft; risc_address = ext_mem_cnt = 0; memset(mb, 0, sizeof(mb)); @@ -987,10 +666,11 @@ qla24xx_fw_dump(scsi_qla_host_t *ha, int hardware_locked) "request...\n", ha->fw_dump); goto qla24xx_fw_dump_failed; } - fw = ha->fw_dump; + fw = &ha->fw_dump->isp.isp24; + qla2xxx_prep_dump(ha, ha->fw_dump); rval = QLA_SUCCESS; - fw->host_status = RD_REG_DWORD(®->host_status); + fw->host_status = htonl(RD_REG_DWORD(®->host_status)); /* Pause RISC. */ if ((RD_REG_DWORD(®->hccr) & HCCRX_RISC_PAUSE) == 0) { @@ -1012,7 +692,7 @@ qla24xx_fw_dump(scsi_qla_host_t *ha, int hardware_locked) /* Host interface registers. */ dmp_reg = (uint32_t __iomem *)(reg + 0); for (cnt = 0; cnt < sizeof(fw->host_reg) / 4; cnt++) - fw->host_reg[cnt] = RD_REG_DWORD(dmp_reg++); + fw->host_reg[cnt] = htonl(RD_REG_DWORD(dmp_reg++)); /* Disable interrupts. */ WRT_REG_DWORD(®->ictrl, 0); @@ -1024,470 +704,471 @@ qla24xx_fw_dump(scsi_qla_host_t *ha, int hardware_locked) dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xF0); WRT_REG_DWORD(dmp_reg, 0xB0000000); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xFC); - fw->shadow_reg[0] = RD_REG_DWORD(dmp_reg); + fw->shadow_reg[0] = htonl(RD_REG_DWORD(dmp_reg)); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xF0); WRT_REG_DWORD(dmp_reg, 0xB0100000); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xFC); - fw->shadow_reg[1] = RD_REG_DWORD(dmp_reg); + fw->shadow_reg[1] = htonl(RD_REG_DWORD(dmp_reg)); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xF0); WRT_REG_DWORD(dmp_reg, 0xB0200000); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xFC); - fw->shadow_reg[2] = RD_REG_DWORD(dmp_reg); + fw->shadow_reg[2] = htonl(RD_REG_DWORD(dmp_reg)); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xF0); WRT_REG_DWORD(dmp_reg, 0xB0300000); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xFC); - fw->shadow_reg[3] = RD_REG_DWORD(dmp_reg); + fw->shadow_reg[3] = htonl(RD_REG_DWORD(dmp_reg)); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xF0); WRT_REG_DWORD(dmp_reg, 0xB0400000); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xFC); - fw->shadow_reg[4] = RD_REG_DWORD(dmp_reg); + fw->shadow_reg[4] = htonl(RD_REG_DWORD(dmp_reg)); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xF0); WRT_REG_DWORD(dmp_reg, 0xB0500000); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xFC); - fw->shadow_reg[5] = RD_REG_DWORD(dmp_reg); + fw->shadow_reg[5] = htonl(RD_REG_DWORD(dmp_reg)); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xF0); WRT_REG_DWORD(dmp_reg, 0xB0600000); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xFC); - fw->shadow_reg[6] = RD_REG_DWORD(dmp_reg); + fw->shadow_reg[6] = htonl(RD_REG_DWORD(dmp_reg)); /* Mailbox registers. */ mbx_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); for (cnt = 0; cnt < sizeof(fw->mailbox_reg) / 2; cnt++) - fw->mailbox_reg[cnt] = RD_REG_WORD(mbx_reg++); + fw->mailbox_reg[cnt] = htons(RD_REG_WORD(mbx_reg++)); /* Transfer sequence registers. */ iter_reg = fw->xseq_gp_reg; WRT_REG_DWORD(®->iobase_addr, 0xBF00); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0xBF10); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0xBF20); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0xBF30); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0xBF40); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0xBF50); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0xBF60); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0xBF70); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0xBFE0); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < sizeof(fw->xseq_0_reg) / 4; cnt++) - fw->xseq_0_reg[cnt] = RD_REG_DWORD(dmp_reg++); + fw->xseq_0_reg[cnt] = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0xBFF0); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < sizeof(fw->xseq_1_reg) / 4; cnt++) - fw->xseq_1_reg[cnt] = RD_REG_DWORD(dmp_reg++); + fw->xseq_1_reg[cnt] = htonl(RD_REG_DWORD(dmp_reg++)); /* Receive sequence registers. */ iter_reg = fw->rseq_gp_reg; WRT_REG_DWORD(®->iobase_addr, 0xFF00); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0xFF10); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0xFF20); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0xFF30); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0xFF40); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0xFF50); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0xFF60); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0xFF70); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0xFFD0); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < sizeof(fw->rseq_0_reg) / 4; cnt++) - fw->rseq_0_reg[cnt] = RD_REG_DWORD(dmp_reg++); + fw->rseq_0_reg[cnt] = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0xFFE0); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < sizeof(fw->rseq_1_reg) / 4; cnt++) - fw->rseq_1_reg[cnt] = RD_REG_DWORD(dmp_reg++); + fw->rseq_1_reg[cnt] = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0xFFF0); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < sizeof(fw->rseq_2_reg) / 4; cnt++) - fw->rseq_2_reg[cnt] = RD_REG_DWORD(dmp_reg++); + fw->rseq_2_reg[cnt] = htonl(RD_REG_DWORD(dmp_reg++)); /* Command DMA registers. */ WRT_REG_DWORD(®->iobase_addr, 0x7100); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < sizeof(fw->cmd_dma_reg) / 4; cnt++) - fw->cmd_dma_reg[cnt] = RD_REG_DWORD(dmp_reg++); + fw->cmd_dma_reg[cnt] = htonl(RD_REG_DWORD(dmp_reg++)); /* Queues. */ iter_reg = fw->req0_dma_reg; WRT_REG_DWORD(®->iobase_addr, 0x7200); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 8; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xE4); for (cnt = 0; cnt < 7; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); iter_reg = fw->resp0_dma_reg; WRT_REG_DWORD(®->iobase_addr, 0x7300); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 8; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xE4); for (cnt = 0; cnt < 7; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); iter_reg = fw->req1_dma_reg; WRT_REG_DWORD(®->iobase_addr, 0x7400); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 8; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xE4); for (cnt = 0; cnt < 7; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); /* Transmit DMA registers. */ iter_reg = fw->xmt0_dma_reg; WRT_REG_DWORD(®->iobase_addr, 0x7600); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x7610); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); iter_reg = fw->xmt1_dma_reg; WRT_REG_DWORD(®->iobase_addr, 0x7620); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x7630); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); iter_reg = fw->xmt2_dma_reg; WRT_REG_DWORD(®->iobase_addr, 0x7640); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x7650); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); iter_reg = fw->xmt3_dma_reg; WRT_REG_DWORD(®->iobase_addr, 0x7660); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x7670); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); iter_reg = fw->xmt4_dma_reg; WRT_REG_DWORD(®->iobase_addr, 0x7680); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x7690); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x76A0); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < sizeof(fw->xmt_data_dma_reg) / 4; cnt++) - fw->xmt_data_dma_reg[cnt] = RD_REG_DWORD(dmp_reg++); + fw->xmt_data_dma_reg[cnt] = + htonl(RD_REG_DWORD(dmp_reg++)); /* Receive DMA registers. */ iter_reg = fw->rcvt0_data_dma_reg; WRT_REG_DWORD(®->iobase_addr, 0x7700); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x7710); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); iter_reg = fw->rcvt1_data_dma_reg; WRT_REG_DWORD(®->iobase_addr, 0x7720); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x7730); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); /* RISC registers. */ iter_reg = fw->risc_gp_reg; WRT_REG_DWORD(®->iobase_addr, 0x0F00); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x0F10); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x0F20); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x0F30); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x0F40); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x0F50); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x0F60); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x0F70); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); /* Local memory controller registers. */ iter_reg = fw->lmc_reg; WRT_REG_DWORD(®->iobase_addr, 0x3000); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x3010); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x3020); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x3030); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x3040); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x3050); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x3060); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); /* Fibre Protocol Module registers. */ iter_reg = fw->fpm_hdw_reg; WRT_REG_DWORD(®->iobase_addr, 0x4000); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x4010); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x4020); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x4030); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x4040); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x4050); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x4060); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x4070); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x4080); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x4090); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x40A0); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x40B0); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); /* Frame Buffer registers. */ iter_reg = fw->fb_hdw_reg; WRT_REG_DWORD(®->iobase_addr, 0x6000); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x6010); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x6020); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x6030); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x6040); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x6100); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x6130); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x6150); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x6170); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x6190); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); WRT_REG_DWORD(®->iobase_addr, 0x61B0); dmp_reg = (uint32_t __iomem *)((uint8_t __iomem *)reg + 0xC0); for (cnt = 0; cnt < 16; cnt++) - *iter_reg++ = RD_REG_DWORD(dmp_reg++); + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); /* Reset RISC. */ WRT_REG_DWORD(®->ctrl_status, @@ -1577,7 +1258,7 @@ qla24xx_fw_dump(scsi_qla_host_t *ha, int hardware_locked) if (test_and_clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags)) { rval = mb[0] & MBS_MASK; - fw->code_ram[cnt] = (mb[3] << 16) | mb[2]; + fw->code_ram[cnt] = htonl((mb[3] << 16) | mb[2]); } else { rval = QLA_FUNCTION_FAILED; } @@ -1627,12 +1308,18 @@ qla24xx_fw_dump(scsi_qla_host_t *ha, int hardware_locked) if (test_and_clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags)) { rval = mb[0] & MBS_MASK; - fw->ext_mem[cnt] = (mb[3] << 16) | mb[2]; + fw->ext_mem[cnt] = htonl((mb[3] << 16) | mb[2]); } else { rval = QLA_FUNCTION_FAILED; } } + if (rval == QLA_SUCCESS) { + eft = qla2xxx_copy_queues(ha, &fw->ext_mem[cnt]); + if (ha->eft) + memcpy(eft, ha->eft, ntohl(ha->fw_dump->eft_size)); + } + if (rval != QLA_SUCCESS) { qla_printk(KERN_WARNING, ha, "Failed to dump firmware (%x)!!!\n", rval); @@ -1650,252 +1337,6 @@ qla24xx_fw_dump_failed: spin_unlock_irqrestore(&ha->hardware_lock, flags); } -void -qla24xx_ascii_fw_dump(scsi_qla_host_t *ha) -{ - uint32_t cnt; - char *uiter; - struct qla24xx_fw_dump *fw; - uint32_t ext_mem_cnt; - - uiter = ha->fw_dump_buffer; - fw = ha->fw_dump; - - qla_uprintf(&uiter, "ISP FW Version %d.%02d.%02d Attributes %04x\n", - ha->fw_major_version, ha->fw_minor_version, - ha->fw_subminor_version, ha->fw_attributes); - - qla_uprintf(&uiter, "\nR2H Status Register\n%04x\n", fw->host_status); - - qla_uprintf(&uiter, "\nHost Interface Registers"); - for (cnt = 0; cnt < sizeof(fw->host_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->host_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nShadow Registers"); - for (cnt = 0; cnt < sizeof(fw->shadow_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->shadow_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nMailbox Registers"); - for (cnt = 0; cnt < sizeof(fw->mailbox_reg) / 2; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->mailbox_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nXSEQ GP Registers"); - for (cnt = 0; cnt < sizeof(fw->xseq_gp_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->xseq_gp_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nXSEQ-0 Registers"); - for (cnt = 0; cnt < sizeof(fw->xseq_0_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->xseq_0_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nXSEQ-1 Registers"); - for (cnt = 0; cnt < sizeof(fw->xseq_1_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->xseq_1_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRSEQ GP Registers"); - for (cnt = 0; cnt < sizeof(fw->rseq_gp_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->rseq_gp_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRSEQ-0 Registers"); - for (cnt = 0; cnt < sizeof(fw->rseq_0_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->rseq_0_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRSEQ-1 Registers"); - for (cnt = 0; cnt < sizeof(fw->rseq_1_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->rseq_1_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRSEQ-2 Registers"); - for (cnt = 0; cnt < sizeof(fw->rseq_2_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->rseq_2_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nCommand DMA Registers"); - for (cnt = 0; cnt < sizeof(fw->cmd_dma_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->cmd_dma_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRequest0 Queue DMA Channel Registers"); - for (cnt = 0; cnt < sizeof(fw->req0_dma_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->req0_dma_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nResponse0 Queue DMA Channel Registers"); - for (cnt = 0; cnt < sizeof(fw->resp0_dma_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->resp0_dma_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRequest1 Queue DMA Channel Registers"); - for (cnt = 0; cnt < sizeof(fw->req1_dma_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->req1_dma_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nXMT0 Data DMA Registers"); - for (cnt = 0; cnt < sizeof(fw->xmt0_dma_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->xmt0_dma_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nXMT1 Data DMA Registers"); - for (cnt = 0; cnt < sizeof(fw->xmt1_dma_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->xmt1_dma_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nXMT2 Data DMA Registers"); - for (cnt = 0; cnt < sizeof(fw->xmt2_dma_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->xmt2_dma_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nXMT3 Data DMA Registers"); - for (cnt = 0; cnt < sizeof(fw->xmt3_dma_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->xmt3_dma_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nXMT4 Data DMA Registers"); - for (cnt = 0; cnt < sizeof(fw->xmt4_dma_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->xmt4_dma_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nXMT Data DMA Common Registers"); - for (cnt = 0; cnt < sizeof(fw->xmt_data_dma_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->xmt_data_dma_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRCV Thread 0 Data DMA Registers"); - for (cnt = 0; cnt < sizeof(fw->rcvt0_data_dma_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->rcvt0_data_dma_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRCV Thread 1 Data DMA Registers"); - for (cnt = 0; cnt < sizeof(fw->rcvt1_data_dma_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->rcvt1_data_dma_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nRISC GP Registers"); - for (cnt = 0; cnt < sizeof(fw->risc_gp_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->risc_gp_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nLMC Registers"); - for (cnt = 0; cnt < sizeof(fw->lmc_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->lmc_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nFPM Hardware Registers"); - for (cnt = 0; cnt < sizeof(fw->fpm_hdw_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->fpm_hdw_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nFB Hardware Registers"); - for (cnt = 0; cnt < sizeof(fw->fb_hdw_reg) / 4; cnt++) { - if (cnt % 8 == 0) - qla_uprintf(&uiter, "\n"); - - qla_uprintf(&uiter, "%08x ", fw->fb_hdw_reg[cnt]); - } - - qla_uprintf(&uiter, "\n\nCode RAM"); - for (cnt = 0; cnt < sizeof (fw->code_ram) / 4; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n%08x: ", cnt + 0x20000); - } - qla_uprintf(&uiter, "%08x ", fw->code_ram[cnt]); - } - - qla_uprintf(&uiter, "\n\nExternal Memory"); - ext_mem_cnt = ha->fw_memory_size - 0x100000 + 1; - for (cnt = 0; cnt < ext_mem_cnt; cnt++) { - if (cnt % 8 == 0) { - qla_uprintf(&uiter, "\n%08x: ", cnt + 0x100000); - } - qla_uprintf(&uiter, "%08x ", fw->ext_mem[cnt]); - } - - qla_uprintf(&uiter, "\n[<==END] ISP Debug Dump"); -} - - /****************************************************************************/ /* Driver Debug Functions. */ /****************************************************************************/ diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h index ab6afeaa2f2..533425338e0 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.h +++ b/drivers/scsi/qla2xxx/qla_dbg.h @@ -37,134 +37,86 @@ /* * Macros use for debugging the driver. */ -#undef ENTER_TRACE -#if defined(ENTER_TRACE) -#define ENTER(x) do { printk("qla2100 : Entering %s()\n", x); } while (0) -#define LEAVE(x) do { printk("qla2100 : Leaving %s()\n", x); } while (0) -#define ENTER_INTR(x) do { printk("qla2100 : Entering %s()\n", x); } while (0) -#define LEAVE_INTR(x) do { printk("qla2100 : Leaving %s()\n", x); } while (0) -#else -#define ENTER(x) do {} while (0) -#define LEAVE(x) do {} while (0) -#define ENTER_INTR(x) do {} while (0) -#define LEAVE_INTR(x) do {} while (0) -#endif -#if DEBUG_QLA2100 -#define DEBUG(x) do {x;} while (0); -#else -#define DEBUG(x) do {} while (0); -#endif +#define DEBUG(x) do { if (extended_error_logging) { x; } } while (0) #if defined(QL_DEBUG_LEVEL_1) -#define DEBUG1(x) do {x;} while (0); +#define DEBUG1(x) do {x;} while (0) #else -#define DEBUG1(x) do {} while (0); +#define DEBUG1(x) do {} while (0) #endif -#if defined(QL_DEBUG_LEVEL_2) -#define DEBUG2(x) do {x;} while (0); -#define DEBUG2_3(x) do {x;} while (0); -#define DEBUG2_3_11(x) do {x;} while (0); -#define DEBUG2_9_10(x) do {x;} while (0); -#define DEBUG2_11(x) do {x;} while (0); -#define DEBUG2_13(x) do {x;} while (0); -#else -#define DEBUG2(x) do {} while (0); -#endif +#define DEBUG2(x) do { if (extended_error_logging) { x; } } while (0) +#define DEBUG2_3(x) do { if (extended_error_logging) { x; } } while (0) +#define DEBUG2_3_11(x) do { if (extended_error_logging) { x; } } while (0) +#define DEBUG2_9_10(x) do { if (extended_error_logging) { x; } } while (0) +#define DEBUG2_11(x) do { if (extended_error_logging) { x; } } while (0) +#define DEBUG2_13(x) do { if (extended_error_logging) { x; } } while (0) #if defined(QL_DEBUG_LEVEL_3) -#define DEBUG3(x) do {x;} while (0); -#define DEBUG2_3(x) do {x;} while (0); -#define DEBUG2_3_11(x) do {x;} while (0); -#define DEBUG3_11(x) do {x;} while (0); +#define DEBUG3(x) do {x;} while (0) +#define DEBUG3_11(x) do {x;} while (0) #else -#define DEBUG3(x) do {} while (0); - #if !defined(QL_DEBUG_LEVEL_2) - #define DEBUG2_3(x) do {} while (0); - #endif +#define DEBUG3(x) do {} while (0) #endif #if defined(QL_DEBUG_LEVEL_4) -#define DEBUG4(x) do {x;} while (0); +#define DEBUG4(x) do {x;} while (0) #else -#define DEBUG4(x) do {} while (0); +#define DEBUG4(x) do {} while (0) #endif #if defined(QL_DEBUG_LEVEL_5) -#define DEBUG5(x) do {x;} while (0); +#define DEBUG5(x) do {x;} while (0) #else -#define DEBUG5(x) do {} while (0); +#define DEBUG5(x) do {} while (0) #endif #if defined(QL_DEBUG_LEVEL_7) -#define DEBUG7(x) do {x;} while (0); +#define DEBUG7(x) do {x;} while (0) #else -#define DEBUG7(x) do {} while (0); +#define DEBUG7(x) do {} while (0) #endif #if defined(QL_DEBUG_LEVEL_9) -#define DEBUG9(x) do {x;} while (0); -#define DEBUG9_10(x) do {x;} while (0); -#define DEBUG2_9_10(x) do {x;} while (0); +#define DEBUG9(x) do {x;} while (0) +#define DEBUG9_10(x) do {x;} while (0) #else -#define DEBUG9(x) do {} while (0); +#define DEBUG9(x) do {} while (0) #endif #if defined(QL_DEBUG_LEVEL_10) -#define DEBUG10(x) do {x;} while (0); -#define DEBUG2_9_10(x) do {x;} while (0); -#define DEBUG9_10(x) do {x;} while (0); +#define DEBUG10(x) do {x;} while (0) +#define DEBUG9_10(x) do {x;} while (0) #else -#define DEBUG10(x) do {} while (0); - #if !defined(DEBUG2_9_10) - #define DEBUG2_9_10(x) do {} while (0); - #endif +#define DEBUG10(x) do {} while (0) #if !defined(DEBUG9_10) - #define DEBUG9_10(x) do {} while (0); + #define DEBUG9_10(x) do {} while (0) #endif #endif #if defined(QL_DEBUG_LEVEL_11) -#define DEBUG11(x) do{x;} while(0); -#if !defined(DEBUG2_11) -#define DEBUG2_11(x) do{x;} while(0); -#endif -#if !defined(DEBUG2_3_11) -#define DEBUG2_3_11(x) do{x;} while(0); -#endif +#define DEBUG11(x) do{x;} while(0) #if !defined(DEBUG3_11) -#define DEBUG3_11(x) do{x;} while(0); +#define DEBUG3_11(x) do{x;} while(0) #endif #else -#define DEBUG11(x) do{} while(0); - #if !defined(QL_DEBUG_LEVEL_2) - #define DEBUG2_11(x) do{} while(0); - #if !defined(QL_DEBUG_LEVEL_3) - #define DEBUG2_3_11(x) do{} while(0); - #endif - #endif +#define DEBUG11(x) do{} while(0) #if !defined(QL_DEBUG_LEVEL_3) - #define DEBUG3_11(x) do{} while(0); + #define DEBUG3_11(x) do{} while(0) #endif #endif #if defined(QL_DEBUG_LEVEL_12) -#define DEBUG12(x) do {x;} while (0); +#define DEBUG12(x) do {x;} while (0) #else -#define DEBUG12(x) do {} while (0); +#define DEBUG12(x) do {} while (0) #endif #if defined(QL_DEBUG_LEVEL_13) #define DEBUG13(x) do {x;} while (0) -#if !defined(DEBUG2_13) -#define DEBUG2_13(x) do {x;} while(0) -#endif #else #define DEBUG13(x) do {} while (0) -#if !defined(QL_DEBUG_LEVEL_2) -#define DEBUG2_13(x) do {} while(0) -#endif #endif #if defined(QL_DEBUG_LEVEL_14) @@ -176,9 +128,6 @@ /* * Firmware Dump structure definition */ -#define FW_DUMP_SIZE_128K 0xBC000 -#define FW_DUMP_SIZE_512K 0x2FC000 -#define FW_DUMP_SIZE_1M 0x5FC000 struct qla2300_fw_dump { uint16_t hccr; @@ -224,8 +173,6 @@ struct qla2100_fw_dump { uint16_t risc_ram[0xf000]; }; -#define FW_DUMP_SIZE_24XX 0x2B0000 - struct qla24xx_fw_dump { uint32_t host_status; uint32_t host_reg[32]; @@ -257,3 +204,39 @@ struct qla24xx_fw_dump { uint32_t code_ram[0x2000]; uint32_t ext_mem[1]; }; + +#define EFT_NUM_BUFFERS 4 +#define EFT_BYTES_PER_BUFFER 0x4000 +#define EFT_SIZE ((EFT_BYTES_PER_BUFFER) * (EFT_NUM_BUFFERS)) + +struct qla2xxx_fw_dump { + uint8_t signature[4]; + uint32_t version; + + uint32_t fw_major_version; + uint32_t fw_minor_version; + uint32_t fw_subminor_version; + uint32_t fw_attributes; + + uint32_t vendor; + uint32_t device; + uint32_t subsystem_vendor; + uint32_t subsystem_device; + + uint32_t fixed_size; + uint32_t mem_size; + uint32_t req_q_size; + uint32_t rsp_q_size; + + uint32_t eft_size; + uint32_t eft_addr_l; + uint32_t eft_addr_h; + + uint32_t header_size; + + union { + struct qla2100_fw_dump isp21; + struct qla2300_fw_dump isp23; + struct qla24xx_fw_dump isp24; + } isp; +}; diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index d6f6579cfd2..0930260aec2 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -487,6 +487,7 @@ typedef struct { #define MBA_IP_RCV_BUFFER_EMPTY 0x8026 /* IP receive buffer queue empty. */ #define MBA_IP_HDR_DATA_SPLIT 0x8027 /* IP header/data splitting feature */ /* used. */ +#define MBA_TRACE_NOTIFICATION 0x8028 /* Trace/Diagnostic notification. */ #define MBA_POINT_TO_POINT 0x8030 /* Point to point mode. */ #define MBA_CMPLT_1_16BIT 0x8031 /* Completion 1 16bit IOSB. */ #define MBA_CMPLT_2_16BIT 0x8032 /* Completion 2 16bit IOSB. */ @@ -608,7 +609,9 @@ typedef struct { #define MBC_SERDES_PARAMS 0x10 /* Serdes Tx Parameters. */ #define MBC_GET_IOCB_STATUS 0x12 /* Get IOCB status command. */ #define MBC_GET_TIMEOUT_PARAMS 0x22 /* Get FW timeouts. */ +#define MBC_TRACE_CONTROL 0x27 /* Trace control command. */ #define MBC_GEN_SYSTEM_ERROR 0x2a /* Generate System Error. */ +#define MBC_READ_SFP 0x31 /* Read SFP Data. */ #define MBC_SET_TIMEOUT_PARAMS 0x32 /* Set FW timeouts. */ #define MBC_MID_INITIALIZE_FIRMWARE 0x48 /* MID Initialize firmware. */ #define MBC_MID_GET_VP_DATABASE 0x49 /* MID Get VP Database. */ @@ -618,6 +621,9 @@ typedef struct { #define MBC_GET_LINK_PRIV_STATS 0x6d /* Get link & private data. */ #define MBC_SET_VENDOR_ID 0x76 /* Set Vendor ID. */ +#define TC_ENABLE 4 +#define TC_DISABLE 5 + /* Firmware return data sizes */ #define FCAL_MAP_SIZE 128 @@ -1997,7 +2003,6 @@ struct isp_operations { uint32_t); void (*fw_dump) (struct scsi_qla_host *, int); - void (*ascii_fw_dump) (struct scsi_qla_host *); int (*beacon_on) (struct scsi_qla_host *); int (*beacon_off) (struct scsi_qla_host *); @@ -2041,6 +2046,7 @@ typedef struct scsi_qla_host { uint32_t enable_led_scheme :1; uint32_t msi_enabled :1; uint32_t msix_enabled :1; + uint32_t disable_serdes :1; } flags; atomic_t loop_state; @@ -2134,7 +2140,7 @@ typedef struct scsi_qla_host { mempool_t *srb_mempool; /* This spinlock is used to protect "io transactions", you must - * aquire it before doing any IO to the card, eg with RD_REG*() and + * acquire it before doing any IO to the card, eg with RD_REG*() and * WRT_REG*() for the duration of your entire commandtransaction. * * This spinlock is of lower priority than the io request lock. @@ -2238,6 +2244,11 @@ typedef struct scsi_qla_host { struct sns_cmd_pkt *sns_cmd; dma_addr_t sns_cmd_dma; +#define SFP_DEV_SIZE 256 +#define SFP_BLOCK_SIZE 64 + void *sfp_data; + dma_addr_t sfp_data_dma; + struct task_struct *dpc_thread; uint8_t dpc_active; /* DPC routine is active */ @@ -2303,11 +2314,12 @@ typedef struct scsi_qla_host { uint16_t fw_seriallink_options24[4]; /* Firmware dump information. */ - void *fw_dump; + struct qla2xxx_fw_dump *fw_dump; + uint32_t fw_dump_len; int fw_dumped; int fw_dump_reading; - char *fw_dump_buffer; - int fw_dump_buffer_len; + dma_addr_t eft_dma; + void *eft; uint8_t host_str[16]; uint32_t pci_attr; diff --git a/drivers/scsi/qla2xxx/qla_devtbl.h b/drivers/scsi/qla2xxx/qla_devtbl.h index a8fc0ffc7fc..dd435410dfa 100644 --- a/drivers/scsi/qla2xxx/qla_devtbl.h +++ b/drivers/scsi/qla2xxx/qla_devtbl.h @@ -1,4 +1,4 @@ -#define QLA_MODEL_NAMES 0x4A +#define QLA_MODEL_NAMES 0x57 /* * Adapter model names and descriptions. @@ -76,6 +76,19 @@ static char *qla2x00_model_name[QLA_MODEL_NAMES*2] = { "QLE2440", "PCI-Express to 4Gb FC, Single Channel", /* 0x145 */ "QLE2464", "PCI-Express to 4Gb FC, Quad Channel", /* 0x146 */ "QLA2440", "PCI-X 2.0 to 4Gb FC, Single Channel", /* 0x147 */ - " ", " ", /* 0x148 */ + "HP AE369A", "PCI-X 2.0 to 4Gb FC, Dual Channel", /* 0x148 */ "QLA2340", "Sun 133MHz PCI-X to 2Gb FC, Single Channel", /* 0x149 */ + " ", " ", /* 0x14a */ + " ", " ", /* 0x14b */ + "QMC2432M", "IBM eServer BC 4Gb FC Expansion Card CFFE", /* 0x14c */ + "QMC2422M", "IBM eServer BC 4Gb FC Expansion Card CFFX", /* 0x14d */ + "QLE220", "Sun PCI-Express to 4Gb FC, Single Channel", /* 0x14e */ + " ", " ", /* 0x14f */ + " ", " ", /* 0x150 */ + " ", " ", /* 0x151 */ + "QME2462", "PCI-Express to 4Gb FC, Dual Channel Mezz HBA", /* 0x152 */ + "QMH2462", "PCI-Express to 4Gb FC, Dual Channel Mezz HBA", /* 0x153 */ + " ", " ", /* 0x154 */ + "QLE220", "PCI-Express to 4Gb FC, Single Channel", /* 0x155 */ + "QLE220", "PCI-Express to 4Gb FC, Single Channel", /* 0x156 */ }; diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index 3af478663be..a0a722cf423 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -141,7 +141,7 @@ struct nvram_24xx { * BIT 2 = Enable Memory Map BIOS * BIT 3 = Enable Selectable Boot * BIT 4 = Disable RISC code load - * BIT 5 = + * BIT 5 = Disable Serdes * BIT 6 = * BIT 7 = * @@ -278,7 +278,7 @@ struct init_cb_24xx { uint16_t response_q_length; uint16_t request_q_length; - uint16_t link_down_timeout; /* Milliseconds. */ + uint16_t link_down_on_nos; /* Milliseconds. */ uint16_t prio_request_q_length; diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 164d53ccbfd..8311ac2b93a 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -31,13 +31,9 @@ extern void qla2x00_update_fw_options(struct scsi_qla_host *); extern void qla24xx_update_fw_options(scsi_qla_host_t *); extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *); extern int qla24xx_load_risc(scsi_qla_host_t *, uint32_t *); -extern int qla24xx_load_risc_flash(scsi_qla_host_t *, uint32_t *); - -extern fc_port_t *qla2x00_alloc_fcport(scsi_qla_host_t *, gfp_t); extern int qla2x00_loop_resync(scsi_qla_host_t *); -extern int qla2x00_find_new_loop_id(scsi_qla_host_t *, fc_port_t *); extern int qla2x00_fabric_login(scsi_qla_host_t *, fc_port_t *, uint16_t *); extern int qla2x00_local_device_login(scsi_qla_host_t *, fc_port_t *); @@ -51,6 +47,8 @@ extern int qla2x00_abort_isp(scsi_qla_host_t *); extern void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *); extern void qla2x00_reg_remote_port(scsi_qla_host_t *, fc_port_t *); +extern void qla2x00_alloc_fw_dump(scsi_qla_host_t *); + /* * Global Data in qla_os.c source file. */ @@ -61,6 +59,8 @@ extern int qlport_down_retry; extern int ql2xplogiabsentdevice; extern int ql2xloginretrycount; extern int ql2xfdmienable; +extern int ql2xallocfwdump; +extern int extended_error_logging; extern void qla2x00_sp_compl(scsi_qla_host_t *, srb_t *); @@ -80,8 +80,6 @@ extern void qla2xxx_wake_dpc(scsi_qla_host_t *); /* * Global Function Prototypes in qla_iocb.c source file. */ -extern void qla2x00_isp_cmd(scsi_qla_host_t *); - extern uint16_t qla2x00_calc_iocbs_32(uint16_t); extern uint16_t qla2x00_calc_iocbs_64(uint16_t); extern void qla2x00_build_scsi_iocbs_32(srb_t *, cmd_entry_t *, uint16_t); @@ -204,6 +202,12 @@ qla2x00_set_serdes_params(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t); extern int qla2x00_stop_firmware(scsi_qla_host_t *); +extern int +qla2x00_trace_control(scsi_qla_host_t *, uint16_t, dma_addr_t, uint16_t); + +extern int +qla2x00_read_sfp(scsi_qla_host_t *, dma_addr_t, uint16_t, uint16_t, uint16_t); + /* * Global Function Prototypes in qla_isr.c source file. */ @@ -254,9 +258,6 @@ extern int qla24xx_write_optrom_data(struct scsi_qla_host *, uint8_t *, extern void qla2100_fw_dump(scsi_qla_host_t *, int); extern void qla2300_fw_dump(scsi_qla_host_t *, int); extern void qla24xx_fw_dump(scsi_qla_host_t *, int); -extern void qla2100_ascii_fw_dump(scsi_qla_host_t *); -extern void qla2300_ascii_fw_dump(scsi_qla_host_t *); -extern void qla24xx_ascii_fw_dump(scsi_qla_host_t *); extern void qla2x00_dump_regs(scsi_qla_host_t *); extern void qla2x00_dump_buffer(uint8_t *, uint32_t); extern void qla2x00_print_scsi_cmd(struct scsi_cmnd *); @@ -280,13 +281,6 @@ extern void *qla24xx_prep_ms_fdmi_iocb(scsi_qla_host_t *, uint32_t, uint32_t); extern int qla2x00_fdmi_register(scsi_qla_host_t *); /* - * Global Function Prototypes in qla_xioctl.c source file. - */ -#define qla2x00_enqueue_aen(ha, cmd, mode) do { } while (0) -#define qla2x00_alloc_ioctl_mem(ha) (0) -#define qla2x00_free_ioctl_mem(ha) do { } while (0) - -/* * Global Function Prototypes in qla_attr.c source file. */ struct class_device_attribute; diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index aef093db597..859649160ca 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -39,6 +39,8 @@ static int qla2x00_fabric_dev_login(scsi_qla_host_t *, fc_port_t *, static int qla2x00_restart_isp(scsi_qla_host_t *); +static int qla2x00_find_new_loop_id(scsi_qla_host_t *ha, fc_port_t *dev); + /****************************************************************************/ /* QLogic ISP2x00 Hardware Support Functions. */ /****************************************************************************/ @@ -89,6 +91,17 @@ qla2x00_initialize_adapter(scsi_qla_host_t *ha) ha->isp_ops.nvram_config(ha); + if (ha->flags.disable_serdes) { + /* Mask HBA via NVRAM settings? */ + qla_printk(KERN_INFO, ha, "Masking HBA WWPN " + "%02x%02x%02x%02x%02x%02x%02x%02x (via NVRAM).\n", + ha->port_name[0], ha->port_name[1], + ha->port_name[2], ha->port_name[3], + ha->port_name[4], ha->port_name[5], + ha->port_name[6], ha->port_name[7]); + return QLA_FUNCTION_FAILED; + } + qla_printk(KERN_INFO, ha, "Verifying loaded RISC code...\n"); retry = 10; @@ -770,29 +783,104 @@ qla24xx_chip_diag(scsi_qla_host_t *ha) return rval; } -static void +void qla2x00_alloc_fw_dump(scsi_qla_host_t *ha) { - uint32_t dump_size = 0; + int rval; + uint32_t dump_size, fixed_size, mem_size, req_q_size, rsp_q_size, + eft_size; + dma_addr_t eft_dma; + void *eft; + + if (ha->fw_dump) { + qla_printk(KERN_WARNING, ha, + "Firmware dump previously allocated.\n"); + return; + } ha->fw_dumped = 0; + fixed_size = mem_size = eft_size = 0; if (IS_QLA2100(ha) || IS_QLA2200(ha)) { - dump_size = sizeof(struct qla2100_fw_dump); + fixed_size = sizeof(struct qla2100_fw_dump); } else if (IS_QLA23XX(ha)) { - dump_size = sizeof(struct qla2300_fw_dump); - dump_size += (ha->fw_memory_size - 0x11000) * sizeof(uint16_t); - } else if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) { - dump_size = sizeof(struct qla24xx_fw_dump); - dump_size += (ha->fw_memory_size - 0x100000) * sizeof(uint32_t); + fixed_size = offsetof(struct qla2300_fw_dump, data_ram); + mem_size = (ha->fw_memory_size - 0x11000 + 1) * + sizeof(uint16_t); + } else if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) { + fixed_size = offsetof(struct qla24xx_fw_dump, ext_mem); + mem_size = (ha->fw_memory_size - 0x100000 + 1) * + sizeof(uint32_t); + + /* Allocate memory for Extended Trace Buffer. */ + eft = dma_alloc_coherent(&ha->pdev->dev, EFT_SIZE, &eft_dma, + GFP_KERNEL); + if (!eft) { + qla_printk(KERN_WARNING, ha, "Unable to allocate " + "(%d KB) for EFT.\n", EFT_SIZE / 1024); + goto cont_alloc; + } + + rval = qla2x00_trace_control(ha, TC_ENABLE, eft_dma, + EFT_NUM_BUFFERS); + if (rval) { + qla_printk(KERN_WARNING, ha, "Unable to initialize " + "EFT (%d).\n", rval); + dma_free_coherent(&ha->pdev->dev, EFT_SIZE, eft, + eft_dma); + goto cont_alloc; + } + + qla_printk(KERN_INFO, ha, "Allocated (%d KB) for EFT...\n", + EFT_SIZE / 1024); + + eft_size = EFT_SIZE; + memset(eft, 0, eft_size); + ha->eft_dma = eft_dma; + ha->eft = eft; } +cont_alloc: + req_q_size = ha->request_q_length * sizeof(request_t); + rsp_q_size = ha->response_q_length * sizeof(response_t); + + dump_size = offsetof(struct qla2xxx_fw_dump, isp); + dump_size += fixed_size + mem_size + req_q_size + rsp_q_size + + eft_size; ha->fw_dump = vmalloc(dump_size); - if (ha->fw_dump) - qla_printk(KERN_INFO, ha, "Allocated (%d KB) for firmware " - "dump...\n", dump_size / 1024); - else + if (!ha->fw_dump) { qla_printk(KERN_WARNING, ha, "Unable to allocate (%d KB) for " "firmware dump!!!\n", dump_size / 1024); + + if (ha->eft) { + dma_free_coherent(&ha->pdev->dev, eft_size, ha->eft, + ha->eft_dma); + ha->eft = NULL; + ha->eft_dma = 0; + } + return; + } + + qla_printk(KERN_INFO, ha, "Allocated (%d KB) for firmware dump...\n", + dump_size / 1024); + + ha->fw_dump_len = dump_size; + ha->fw_dump->signature[0] = 'Q'; + ha->fw_dump->signature[1] = 'L'; + ha->fw_dump->signature[2] = 'G'; + ha->fw_dump->signature[3] = 'C'; + ha->fw_dump->version = __constant_htonl(1); + + ha->fw_dump->fixed_size = htonl(fixed_size); + ha->fw_dump->mem_size = htonl(mem_size); + ha->fw_dump->req_q_size = htonl(req_q_size); + ha->fw_dump->rsp_q_size = htonl(rsp_q_size); + + ha->fw_dump->eft_size = htonl(eft_size); + ha->fw_dump->eft_addr_l = htonl(LSD(ha->eft_dma)); + ha->fw_dump->eft_addr_h = htonl(MSD(ha->eft_dma)); + + ha->fw_dump->header_size = + htonl(offsetof(struct qla2xxx_fw_dump, isp)); } /** @@ -810,8 +898,6 @@ qla2x00_resize_request_q(scsi_qla_host_t *ha) dma_addr_t request_dma; request_t *request_ring; - qla2x00_alloc_fw_dump(ha); - /* Valid only on recent ISPs. */ if (IS_QLA2100(ha) || IS_QLA2200(ha)) return; @@ -883,6 +969,9 @@ qla2x00_setup_chip(scsi_qla_host_t *ha) &ha->fw_subminor_version, &ha->fw_attributes, &ha->fw_memory_size); qla2x00_resize_request_q(ha); + + if (ql2xallocfwdump) + qla2x00_alloc_fw_dump(ha); } } else { DEBUG2(printk(KERN_INFO @@ -1186,8 +1275,7 @@ qla2x00_fw_ready(scsi_qla_host_t *ha) rval = QLA_FUNCTION_FAILED; if (atomic_read(&ha->loop_down_timer) && - (fw_state >= FSTATE_LOSS_OF_SYNC || - fw_state == FSTATE_WAIT_AL_PA)) { + fw_state != FSTATE_READY) { /* Loop down. Timeout on min_wait for states * other than Wait for Login. */ @@ -1555,6 +1643,8 @@ qla2x00_nvram_config(scsi_qla_host_t *ha) /* * Set host adapter parameters. */ + if (nv->host_p[0] & BIT_7) + extended_error_logging = 1; ha->flags.disable_risc_code_load = ((nv->host_p[0] & BIT_4) ? 1 : 0); /* Always load RISC code on non ISP2[12]00 chips. */ if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) @@ -1563,6 +1653,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha) ha->flags.enable_lip_full_login = ((nv->host_p[1] & BIT_2) ? 1 : 0); ha->flags.enable_target_reset = ((nv->host_p[1] & BIT_3) ? 1 : 0); ha->flags.enable_led_scheme = (nv->special_options[1] & BIT_4) ? 1 : 0; + ha->flags.disable_serdes = 0; ha->operating_mode = (icb->add_firmware_options[0] & (BIT_6 | BIT_5 | BIT_4)) >> 4; @@ -1701,7 +1792,7 @@ qla2x00_rport_del(void *data) * * Returns a pointer to the allocated fcport, or NULL, if none available. */ -fc_port_t * +static fc_port_t * qla2x00_alloc_fcport(scsi_qla_host_t *ha, gfp_t flags) { fc_port_t *fcport; @@ -2258,8 +2349,7 @@ qla2x00_configure_fabric(scsi_qla_host_t *ha) } /* Remove device from the new list and add it to DB */ - list_del(&fcport->list); - list_add_tail(&fcport->list, &ha->fcports); + list_move_tail(&fcport->list, &ha->fcports); /* Login and update database */ qla2x00_fabric_dev_login(ha, fcport, &next_loopid); @@ -2498,7 +2588,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports) * Context: * Kernel context. */ -int +static int qla2x00_find_new_loop_id(scsi_qla_host_t *ha, fc_port_t *dev) { int rval; @@ -2973,6 +3063,7 @@ qla2x00_update_fcports(scsi_qla_host_t *ha) int qla2x00_abort_isp(scsi_qla_host_t *ha) { + int rval; unsigned long flags = 0; uint16_t cnt; srb_t *sp; @@ -3029,6 +3120,16 @@ qla2x00_abort_isp(scsi_qla_host_t *ha) ha->isp_abort_cnt = 0; clear_bit(ISP_ABORT_RETRY, &ha->dpc_flags); + + if (ha->eft) { + rval = qla2x00_trace_control(ha, TC_ENABLE, + ha->eft_dma, EFT_NUM_BUFFERS); + if (rval) { + qla_printk(KERN_WARNING, ha, + "Unable to reinitialize EFT " + "(%d).\n", rval); + } + } } else { /* failed the ISP abort */ ha->flags.online = 1; if (test_bit(ISP_ABORT_RETRY, &ha->dpc_flags)) { @@ -3049,14 +3150,14 @@ qla2x00_abort_isp(scsi_qla_host_t *ha) ha->isp_abort_cnt--; DEBUG(printk("qla%ld: ISP abort - " "retry remaining %d\n", - ha->host_no, ha->isp_abort_cnt);) + ha->host_no, ha->isp_abort_cnt)); status = 1; } } else { ha->isp_abort_cnt = MAX_RETRIES_OF_ISP_ABORT; DEBUG(printk("qla2x00(%ld): ISP error recovery " "- retrying (%d) more times\n", - ha->host_no, ha->isp_abort_cnt);) + ha->host_no, ha->isp_abort_cnt)); set_bit(ISP_ABORT_RETRY, &ha->dpc_flags); status = 1; } @@ -3070,7 +3171,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha) } else { DEBUG(printk(KERN_INFO "qla2x00_abort_isp(%ld): exiting.\n", - ha->host_no);) + ha->host_no)); } return(status); @@ -3146,7 +3247,7 @@ qla2x00_restart_isp(scsi_qla_host_t *ha) clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags); if (!(status = qla2x00_fw_ready(ha))) { DEBUG(printk("%s(): Start configure loop, " - "status = %d\n", __func__, status);) + "status = %d\n", __func__, status)); /* Issue a marker after FW becomes ready. */ qla2x00_marker(ha, 0, 0, MK_SYNC_ALL); @@ -3170,7 +3271,7 @@ qla2x00_restart_isp(scsi_qla_host_t *ha) DEBUG(printk("%s(): Configure loop done, status = 0x%x\n", __func__, - status);) + status)); } return (status); } @@ -3290,7 +3391,6 @@ qla24xx_nvram_config(scsi_qla_host_t *ha) nv->node_name[6] = 0x55; nv->node_name[7] = 0x86; nv->login_retry_count = __constant_cpu_to_le16(8); - nv->link_down_timeout = __constant_cpu_to_le16(200); nv->interrupt_delay_timer = __constant_cpu_to_le16(0); nv->login_timeout = __constant_cpu_to_le16(0); nv->firmware_options_1 = @@ -3319,7 +3419,7 @@ qla24xx_nvram_config(scsi_qla_host_t *ha) *dptr1++ = *dptr2++; icb->login_retry_count = nv->login_retry_count; - icb->link_down_timeout = nv->link_down_timeout; + icb->link_down_on_nos = nv->link_down_on_nos; /* Copy 2nd segment. */ dptr1 = (uint8_t *)&icb->interrupt_delay_timer; @@ -3374,6 +3474,7 @@ qla24xx_nvram_config(scsi_qla_host_t *ha) ha->flags.enable_lip_full_login = 1; ha->flags.enable_target_reset = 1; ha->flags.enable_led_scheme = 0; + ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0; ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) & (BIT_6 | BIT_5 | BIT_4)) >> 4; @@ -3473,7 +3574,7 @@ qla24xx_nvram_config(scsi_qla_host_t *ha) return (rval); } -int +static int qla24xx_load_risc_flash(scsi_qla_host_t *ha, uint32_t *srisc_addr) { int rval; diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index 8c769cfaa14..c5b3c610a32 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -15,6 +15,7 @@ static inline uint16_t qla2x00_get_cmd_direction(struct scsi_cmnd *cmd); static inline cont_entry_t *qla2x00_prep_cont_type0_iocb(scsi_qla_host_t *); static inline cont_a64_entry_t *qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *); static request_t *qla2x00_req_pkt(scsi_qla_host_t *ha); +static void qla2x00_isp_cmd(scsi_qla_host_t *ha); /** * qla2x00_get_cmd_direction() - Determine control_flag data direction. @@ -470,6 +471,7 @@ __qla2x00_marker(scsi_qla_host_t *ha, uint16_t loop_id, uint16_t lun, mrk24->nport_handle = cpu_to_le16(loop_id); mrk24->lun[1] = LSB(lun); mrk24->lun[2] = MSB(lun); + host_to_fcp_swap(mrk24->lun, sizeof(mrk24->lun)); } else { SET_TARGET_ID(ha, mrk->target, loop_id); mrk->lun = cpu_to_le16(lun); @@ -574,7 +576,7 @@ qla2x00_req_pkt(scsi_qla_host_t *ha) * * Note: The caller must hold the hardware lock before calling this routine. */ -void +static void qla2x00_isp_cmd(scsi_qla_host_t *ha) { device_reg_t __iomem *reg = ha->iobase; diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index b28ac0a27e2..de0613135f7 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -395,10 +395,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags); ha->flags.management_server_logged_in = 0; - - /* Update AEN queue. */ - qla2x00_enqueue_aen(ha, MBA_LIP_OCCURRED, NULL); - break; case MBA_LOOP_UP: /* Loop Up Event */ @@ -418,9 +414,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) link_speed); ha->flags.management_server_logged_in = 0; - - /* Update AEN queue. */ - qla2x00_enqueue_aen(ha, MBA_LOOP_UP, NULL); break; case MBA_LOOP_DOWN: /* Loop Down Event */ @@ -439,9 +432,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) ha->link_data_rate = LDR_UNKNOWN; if (ql2xfdmienable) set_bit(REGISTER_FDMI_NEEDED, &ha->dpc_flags); - - /* Update AEN queue. */ - qla2x00_enqueue_aen(ha, MBA_LOOP_DOWN, NULL); break; case MBA_LIP_RESET: /* LIP reset occurred */ @@ -460,10 +450,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) ha->operating_mode = LOOP; ha->flags.management_server_logged_in = 0; - - /* Update AEN queue. */ - qla2x00_enqueue_aen(ha, MBA_LIP_RESET, NULL); - break; case MBA_POINT_TO_POINT: /* Point-to-Point */ @@ -545,9 +531,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags); set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags); - - /* Update AEN queue. */ - qla2x00_enqueue_aen(ha, MBA_PORT_UPDATE, NULL); break; case MBA_RSCN_UPDATE: /* State Change Registration */ @@ -584,9 +567,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags); set_bit(RSCN_UPDATE, &ha->dpc_flags); - - /* Update AEN queue. */ - qla2x00_enqueue_aen(ha, MBA_RSCN_UPDATE, &mb[0]); break; /* case MBA_RIO_RESPONSE: */ @@ -607,6 +587,11 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) DEBUG2(printk("scsi(%ld): Discard RND Frame -- %04x %04x " "%04x.\n", ha->host_no, mb[1], mb[2], mb[3])); break; + + case MBA_TRACE_NOTIFICATION: + DEBUG2(printk("scsi(%ld): Trace Notification -- %04x %04x.\n", + ha->host_no, mb[1], mb[2])); + break; } } @@ -1452,8 +1437,8 @@ qla24xx_ms_entry(scsi_qla_host_t *ha, struct ct_entry_24xx *pkt) DEBUG3(printk("%s(%ld): pkt=%p pkthandle=%d.\n", __func__, ha->host_no, pkt, pkt->handle)); - DEBUG9(printk("%s: ct pkt dump:\n", __func__);) - DEBUG9(qla2x00_dump_buffer((void *)pkt, sizeof(struct ct_entry_24xx));) + DEBUG9(printk("%s: ct pkt dump:\n", __func__)); + DEBUG9(qla2x00_dump_buffer((void *)pkt, sizeof(struct ct_entry_24xx))); /* Validate handle. */ if (pkt->handle < MAX_OUTSTANDING_COMMANDS) diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index d6cb3bd1a29..879f281e2ea 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -13,13 +13,13 @@ qla2x00_mbx_sem_timeout(unsigned long data) { struct semaphore *sem_ptr = (struct semaphore *)data; - DEBUG11(printk("qla2x00_sem_timeout: entered.\n");) + DEBUG11(printk("qla2x00_sem_timeout: entered.\n")); if (sem_ptr != NULL) { up(sem_ptr); } - DEBUG11(printk("qla2x00_mbx_sem_timeout: exiting.\n");) + DEBUG11(printk("qla2x00_mbx_sem_timeout: exiting.\n")); } /* @@ -61,7 +61,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp) rval = QLA_SUCCESS; abort_active = test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags); - DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);) + DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); /* * Wait for active mailbox commands to finish by waiting at most tov @@ -72,7 +72,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp) if (qla2x00_down_timeout(&ha->mbx_cmd_sem, mcp->tov * HZ)) { /* Timeout occurred. Return error. */ DEBUG2_3_11(printk("%s(%ld): cmd access timeout. " - "Exiting.\n", __func__, ha->host_no);) + "Exiting.\n", __func__, ha->host_no)); return QLA_FUNCTION_TIMEOUT; } } @@ -86,7 +86,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp) spin_lock_irqsave(&ha->mbx_reg_lock, mbx_flags); DEBUG11(printk("scsi(%ld): prepare to issue mbox cmd=0x%x.\n", - ha->host_no, mcp->mb[0]);) + ha->host_no, mcp->mb[0])); spin_lock_irqsave(&ha->hardware_lock, flags); @@ -131,14 +131,14 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp) /* Unlock mbx registers and wait for interrupt */ DEBUG11(printk("%s(%ld): going to unlock irq & waiting for interrupt. " - "jiffies=%lx.\n", __func__, ha->host_no, jiffies);) + "jiffies=%lx.\n", __func__, ha->host_no, jiffies)); /* Wait for mbx cmd completion until timeout */ if (!abort_active && io_lock_on) { /* sleep on completion semaphore */ DEBUG11(printk("%s(%ld): INTERRUPT MODE. Initializing timer.\n", - __func__, ha->host_no);) + __func__, ha->host_no)); init_timer(&tmp_intr_timer); tmp_intr_timer.data = (unsigned long)&ha->mbx_intr_sem; @@ -147,11 +147,11 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp) (void (*)(unsigned long))qla2x00_mbx_sem_timeout; DEBUG11(printk("%s(%ld): Adding timer.\n", __func__, - ha->host_no);) + ha->host_no)); add_timer(&tmp_intr_timer); DEBUG11(printk("%s(%ld): going to unlock & sleep. " - "time=0x%lx.\n", __func__, ha->host_no, jiffies);) + "time=0x%lx.\n", __func__, ha->host_no, jiffies)); set_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags); @@ -170,14 +170,14 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp) down(&ha->mbx_intr_sem); DEBUG11(printk("%s(%ld): waking up. time=0x%lx\n", __func__, - ha->host_no, jiffies);) + ha->host_no, jiffies)); clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags); /* delete the timer */ del_timer(&tmp_intr_timer); } else { DEBUG3_11(printk("%s(%ld): cmd=%x POLLING MODE.\n", __func__, - ha->host_no, command);) + ha->host_no, command)); if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) WRT_REG_DWORD(®->isp24.hccr, HCCRX_SET_HOST_INT); @@ -209,7 +209,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp) uint16_t *iptr2; DEBUG3_11(printk("%s(%ld): cmd %x completed.\n", __func__, - ha->host_no, command);) + ha->host_no, command)); /* Got interrupt. Clear the flag. */ ha->flags.mbox_int = 0; @@ -266,7 +266,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp) if (!abort_active) { DEBUG11(printk("%s(%ld): checking for additional resp " - "interrupt.\n", __func__, ha->host_no);) + "interrupt.\n", __func__, ha->host_no)); /* polling mode for non isp_abort commands. */ qla2x00_poll(ha); @@ -277,9 +277,9 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp) if (!io_lock_on || (mcp->flags & IOCTL_CMD)) { /* not in dpc. schedule it for dpc to take over. */ DEBUG(printk("%s(%ld): timeout schedule " - "isp_abort_needed.\n", __func__, ha->host_no);) + "isp_abort_needed.\n", __func__, ha->host_no)); DEBUG2_3_11(printk("%s(%ld): timeout schedule " - "isp_abort_needed.\n", __func__, ha->host_no);) + "isp_abort_needed.\n", __func__, ha->host_no)); qla_printk(KERN_WARNING, ha, "Mailbox command timeout occured. Scheduling ISP " "abort.\n"); @@ -288,9 +288,9 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp) } else if (!abort_active) { /* call abort directly since we are in the DPC thread */ DEBUG(printk("%s(%ld): timeout calling abort_isp\n", - __func__, ha->host_no);) + __func__, ha->host_no)); DEBUG2_3_11(printk("%s(%ld): timeout calling " - "abort_isp\n", __func__, ha->host_no);) + "abort_isp\n", __func__, ha->host_no)); qla_printk(KERN_WARNING, ha, "Mailbox command timeout occured. Issuing ISP " "abort.\n"); @@ -303,9 +303,9 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp) } clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags); DEBUG(printk("%s(%ld): finished abort_isp\n", __func__, - ha->host_no);) + ha->host_no)); DEBUG2_3_11(printk("%s(%ld): finished abort_isp\n", - __func__, ha->host_no);) + __func__, ha->host_no)); } } @@ -316,9 +316,9 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp) if (rval) { DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, " "mbx2=%x, cmd=%x ****\n", __func__, ha->host_no, - mcp->mb[0], mcp->mb[1], mcp->mb[2], command);) + mcp->mb[0], mcp->mb[1], mcp->mb[2], command)); } else { - DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no);) + DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); } return rval; @@ -394,7 +394,7 @@ qla2x00_execute_fw(scsi_qla_host_t *ha, uint32_t risc_addr) mbx_cmd_t mc; mbx_cmd_t *mcp = &mc; - DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);) + DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); mcp->mb[0] = MBC_EXECUTE_FIRMWARE; mcp->out_mb = MBX_0; @@ -424,10 +424,10 @@ qla2x00_execute_fw(scsi_qla_host_t *ha, uint32_t risc_addr) } else { if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) { DEBUG11(printk("%s(%ld): done exchanges=%x.\n", - __func__, ha->host_no, mcp->mb[1]);) + __func__, ha->host_no, mcp->mb[1])); } else { DEBUG11(printk("%s(%ld): done.\n", __func__, - ha->host_no);) + ha->host_no)); } } @@ -611,7 +611,7 @@ qla2x00_mbx_reg_test(scsi_qla_host_t *ha) mbx_cmd_t mc; mbx_cmd_t *mcp = &mc; - DEBUG11(printk("qla2x00_mbx_reg_test(%ld): entered.\n", ha->host_no);) + DEBUG11(printk("qla2x00_mbx_reg_test(%ld): entered.\n", ha->host_no)); mcp->mb[0] = MBC_MAILBOX_REGISTER_TEST; mcp->mb[1] = 0xAAAA; @@ -639,11 +639,11 @@ qla2x00_mbx_reg_test(scsi_qla_host_t *ha) if (rval != QLA_SUCCESS) { /*EMPTY*/ DEBUG2_3_11(printk("qla2x00_mbx_reg_test(%ld): failed=%x.\n", - ha->host_no, rval);) + ha->host_no, rval)); } else { /*EMPTY*/ DEBUG11(printk("qla2x00_mbx_reg_test(%ld): done.\n", - ha->host_no);) + ha->host_no)); } return rval; @@ -671,7 +671,7 @@ qla2x00_verify_checksum(scsi_qla_host_t *ha, uint32_t risc_addr) mbx_cmd_t mc; mbx_cmd_t *mcp = &mc; - DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);) + DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); mcp->mb[0] = MBC_VERIFY_CHECKSUM; mcp->out_mb = MBX_0; @@ -694,9 +694,9 @@ qla2x00_verify_checksum(scsi_qla_host_t *ha, uint32_t risc_addr) if (rval != QLA_SUCCESS) { DEBUG2_3_11(printk("%s(%ld): failed=%x chk sum=%x.\n", __func__, ha->host_no, rval, (IS_QLA24XX(ha) || IS_QLA54XX(ha) ? - (mcp->mb[2] << 16) | mcp->mb[1]: mcp->mb[1]));) + (mcp->mb[2] << 16) | mcp->mb[1]: mcp->mb[1]))); } else { - DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no);) + DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); } return rval; @@ -743,9 +743,9 @@ qla2x00_issue_iocb(scsi_qla_host_t *ha, void* buffer, dma_addr_t phys_addr, if (rval != QLA_SUCCESS) { /*EMPTY*/ DEBUG(printk("qla2x00_issue_iocb(%ld): failed rval 0x%x\n", - ha->host_no, rval);) + ha->host_no, rval)); DEBUG2(printk("qla2x00_issue_iocb(%ld): failed rval 0x%x\n", - ha->host_no, rval);) + ha->host_no, rval)); } else { sts_entry_t *sts_entry = (sts_entry_t *) buffer; @@ -781,7 +781,7 @@ qla2x00_abort_command(scsi_qla_host_t *ha, srb_t *sp) mbx_cmd_t mc; mbx_cmd_t *mcp = &mc; - DEBUG11(printk("qla2x00_abort_command(%ld): entered.\n", ha->host_no);) + DEBUG11(printk("qla2x00_abort_command(%ld): entered.\n", ha->host_no)); fcport = sp->fcport; @@ -813,11 +813,11 @@ qla2x00_abort_command(scsi_qla_host_t *ha, srb_t *sp) if (rval != QLA_SUCCESS) { DEBUG2_3_11(printk("qla2x00_abort_command(%ld): failed=%x.\n", - ha->host_no, rval);) + ha->host_no, rval)); } else { sp->flags |= SRB_ABORT_PENDING; DEBUG11(printk("qla2x00_abort_command(%ld): done.\n", - ha->host_no);) + ha->host_no)); } return rval; @@ -848,7 +848,7 @@ qla2x00_abort_target(fc_port_t *fcport) if (fcport == NULL) return 0; - DEBUG11(printk("%s(%ld): entered.\n", __func__, fcport->ha->host_no);) + DEBUG11(printk("%s(%ld): entered.\n", __func__, fcport->ha->host_no)); ha = fcport->ha; mcp->mb[0] = MBC_ABORT_TARGET; @@ -872,11 +872,11 @@ qla2x00_abort_target(fc_port_t *fcport) if (rval != QLA_SUCCESS) { DEBUG2_3_11(printk("qla2x00_abort_target(%ld): failed=%x.\n", - ha->host_no, rval);) + ha->host_no, rval)); } else { /*EMPTY*/ DEBUG11(printk("qla2x00_abort_target(%ld): done.\n", - ha->host_no);) + ha->host_no)); } return rval; @@ -912,7 +912,7 @@ qla2x00_get_adapter_id(scsi_qla_host_t *ha, uint16_t *id, uint8_t *al_pa, mbx_cmd_t *mcp = &mc; DEBUG11(printk("qla2x00_get_adapter_id(%ld): entered.\n", - ha->host_no);) + ha->host_no)); mcp->mb[0] = MBC_GET_ADAPTER_LOOP_ID; mcp->out_mb = MBX_0; @@ -933,11 +933,11 @@ qla2x00_get_adapter_id(scsi_qla_host_t *ha, uint16_t *id, uint8_t *al_pa, if (rval != QLA_SUCCESS) { /*EMPTY*/ DEBUG2_3_11(printk("qla2x00_get_adapter_id(%ld): failed=%x.\n", - ha->host_no, rval);) + ha->host_no, rval)); } else { /*EMPTY*/ DEBUG11(printk("qla2x00_get_adapter_id(%ld): done.\n", - ha->host_no);) + ha->host_no)); } return rval; @@ -968,7 +968,7 @@ qla2x00_get_retry_cnt(scsi_qla_host_t *ha, uint8_t *retry_cnt, uint8_t *tov, mbx_cmd_t *mcp = &mc; DEBUG11(printk("qla2x00_get_retry_cnt(%ld): entered.\n", - ha->host_no);) + ha->host_no)); mcp->mb[0] = MBC_GET_RETRY_COUNT; mcp->out_mb = MBX_0; @@ -980,7 +980,7 @@ qla2x00_get_retry_cnt(scsi_qla_host_t *ha, uint8_t *retry_cnt, uint8_t *tov, if (rval != QLA_SUCCESS) { /*EMPTY*/ DEBUG2_3_11(printk("qla2x00_get_retry_cnt(%ld): failed = %x.\n", - ha->host_no, mcp->mb[0]);) + ha->host_no, mcp->mb[0])); } else { /* Convert returned data and check our values. */ *r_a_tov = mcp->mb[3] / 2; @@ -992,7 +992,7 @@ qla2x00_get_retry_cnt(scsi_qla_host_t *ha, uint8_t *retry_cnt, uint8_t *tov, } DEBUG11(printk("qla2x00_get_retry_cnt(%ld): done. mb3=%d " - "ratov=%d.\n", ha->host_no, mcp->mb[3], ratov);) + "ratov=%d.\n", ha->host_no, mcp->mb[3], ratov)); } return rval; @@ -1023,7 +1023,7 @@ qla2x00_init_firmware(scsi_qla_host_t *ha, uint16_t size) mbx_cmd_t *mcp = &mc; DEBUG11(printk("qla2x00_init_firmware(%ld): entered.\n", - ha->host_no);) + ha->host_no)); mcp->mb[0] = MBC_INITIALIZE_FIRMWARE; mcp->mb[2] = MSW(ha->init_cb_dma); @@ -1043,11 +1043,11 @@ qla2x00_init_firmware(scsi_qla_host_t *ha, uint16_t size) /*EMPTY*/ DEBUG2_3_11(printk("qla2x00_init_firmware(%ld): failed=%x " "mb0=%x.\n", - ha->host_no, rval, mcp->mb[0]);) + ha->host_no, rval, mcp->mb[0])); } else { /*EMPTY*/ DEBUG11(printk("qla2x00_init_firmware(%ld): done.\n", - ha->host_no);) + ha->host_no)); } return rval; @@ -1079,7 +1079,7 @@ qla2x00_get_port_database(scsi_qla_host_t *ha, fc_port_t *fcport, uint8_t opt) struct port_database_24xx *pd24; dma_addr_t pd_dma; - DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);) + DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); pd24 = NULL; pd = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &pd_dma); @@ -1220,7 +1220,7 @@ qla2x00_get_firmware_state(scsi_qla_host_t *ha, uint16_t *dptr) mbx_cmd_t *mcp = &mc; DEBUG11(printk("qla2x00_get_firmware_state(%ld): entered.\n", - ha->host_no);) + ha->host_no)); mcp->mb[0] = MBC_GET_FIRMWARE_STATE; mcp->out_mb = MBX_0; @@ -1235,11 +1235,11 @@ qla2x00_get_firmware_state(scsi_qla_host_t *ha, uint16_t *dptr) if (rval != QLA_SUCCESS) { /*EMPTY*/ DEBUG2_3_11(printk("qla2x00_get_firmware_state(%ld): " - "failed=%x.\n", ha->host_no, rval);) + "failed=%x.\n", ha->host_no, rval)); } else { /*EMPTY*/ DEBUG11(printk("qla2x00_get_firmware_state(%ld): done.\n", - ha->host_no);) + ha->host_no)); } return rval; @@ -1272,7 +1272,7 @@ qla2x00_get_port_name(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t *name, mbx_cmd_t *mcp = &mc; DEBUG11(printk("qla2x00_get_port_name(%ld): entered.\n", - ha->host_no);) + ha->host_no)); mcp->mb[0] = MBC_GET_PORT_NAME; mcp->out_mb = MBX_1|MBX_0; @@ -1292,7 +1292,7 @@ qla2x00_get_port_name(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t *name, if (rval != QLA_SUCCESS) { /*EMPTY*/ DEBUG2_3_11(printk("qla2x00_get_port_name(%ld): failed=%x.\n", - ha->host_no, rval);) + ha->host_no, rval)); } else { if (name != NULL) { /* This function returns name in big endian. */ @@ -1307,7 +1307,7 @@ qla2x00_get_port_name(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t *name, } DEBUG11(printk("qla2x00_get_port_name(%ld): done.\n", - ha->host_no);) + ha->host_no)); } return rval; @@ -1335,7 +1335,7 @@ qla2x00_lip_reset(scsi_qla_host_t *ha) mbx_cmd_t mc; mbx_cmd_t *mcp = &mc; - DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);) + DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) { mcp->mb[0] = MBC_LIP_FULL_LOGIN; @@ -1364,10 +1364,10 @@ qla2x00_lip_reset(scsi_qla_host_t *ha) if (rval != QLA_SUCCESS) { /*EMPTY*/ DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", - __func__, ha->host_no, rval);) + __func__, ha->host_no, rval)); } else { /*EMPTY*/ - DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no);) + DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); } return rval; @@ -1400,10 +1400,10 @@ qla2x00_send_sns(scsi_qla_host_t *ha, dma_addr_t sns_phys_address, mbx_cmd_t *mcp = &mc; DEBUG11(printk("qla2x00_send_sns(%ld): entered.\n", - ha->host_no);) + ha->host_no)); DEBUG11(printk("qla2x00_send_sns: retry cnt=%d ratov=%d total " - "tov=%d.\n", ha->retry_count, ha->login_timeout, mcp->tov);) + "tov=%d.\n", ha->retry_count, ha->login_timeout, mcp->tov)); mcp->mb[0] = MBC_SEND_SNS_COMMAND; mcp->mb[1] = cmd_size; @@ -1421,12 +1421,12 @@ qla2x00_send_sns(scsi_qla_host_t *ha, dma_addr_t sns_phys_address, if (rval != QLA_SUCCESS) { /*EMPTY*/ DEBUG(printk("qla2x00_send_sns(%ld): failed=%x mb[0]=%x " - "mb[1]=%x.\n", ha->host_no, rval, mcp->mb[0], mcp->mb[1]);) + "mb[1]=%x.\n", ha->host_no, rval, mcp->mb[0], mcp->mb[1])); DEBUG2_3_11(printk("qla2x00_send_sns(%ld): failed=%x mb[0]=%x " - "mb[1]=%x.\n", ha->host_no, rval, mcp->mb[0], mcp->mb[1]);) + "mb[1]=%x.\n", ha->host_no, rval, mcp->mb[0], mcp->mb[1])); } else { /*EMPTY*/ - DEBUG11(printk("qla2x00_send_sns(%ld): done.\n", ha->host_no);) + DEBUG11(printk("qla2x00_send_sns(%ld): done.\n", ha->host_no)); } return rval; @@ -1442,7 +1442,7 @@ qla24xx_login_fabric(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain, dma_addr_t lg_dma; uint32_t iop[2]; - DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);) + DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); lg = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &lg_dma); if (lg == NULL) { @@ -1458,13 +1458,15 @@ qla24xx_login_fabric(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain, lg->control_flags = __constant_cpu_to_le16(LCF_COMMAND_PLOGI); if (opt & BIT_0) lg->control_flags |= __constant_cpu_to_le16(LCF_COND_PLOGI); + if (opt & BIT_1) + lg->control_flags |= __constant_cpu_to_le16(LCF_SKIP_PRLI); lg->port_id[0] = al_pa; lg->port_id[1] = area; lg->port_id[2] = domain; rval = qla2x00_issue_iocb(ha, lg, lg_dma, 0); if (rval != QLA_SUCCESS) { DEBUG2_3_11(printk("%s(%ld): failed to issue Login IOCB " - "(%x).\n", __func__, ha->host_no, rval);) + "(%x).\n", __func__, ha->host_no, rval)); } else if (lg->entry_status != 0) { DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " "-- error status (%x).\n", __func__, ha->host_no, @@ -1505,7 +1507,7 @@ qla24xx_login_fabric(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain, break; } } else { - DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no);) + DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); iop[0] = le32_to_cpu(lg->io_parameter[0]); @@ -1559,7 +1561,7 @@ qla2x00_login_fabric(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain, mbx_cmd_t mc; mbx_cmd_t *mcp = &mc; - DEBUG11(printk("qla2x00_login_fabric(%ld): entered.\n", ha->host_no);) + DEBUG11(printk("qla2x00_login_fabric(%ld): entered.\n", ha->host_no)); mcp->mb[0] = MBC_LOGIN_FABRIC_PORT; mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0; @@ -1604,11 +1606,11 @@ qla2x00_login_fabric(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain, /*EMPTY*/ DEBUG2_3_11(printk("qla2x00_login_fabric(%ld): failed=%x " "mb[0]=%x mb[1]=%x mb[2]=%x.\n", ha->host_no, rval, - mcp->mb[0], mcp->mb[1], mcp->mb[2]);) + mcp->mb[0], mcp->mb[1], mcp->mb[2])); } else { /*EMPTY*/ DEBUG11(printk("qla2x00_login_fabric(%ld): done.\n", - ha->host_no);) + ha->host_no)); } return rval; @@ -1643,7 +1645,7 @@ qla2x00_login_local_device(scsi_qla_host_t *ha, fc_port_t *fcport, fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa, mb_ret, opt); - DEBUG3(printk("%s(%ld): entered.\n", __func__, ha->host_no);) + DEBUG3(printk("%s(%ld): entered.\n", __func__, ha->host_no)); mcp->mb[0] = MBC_LOGIN_LOOP_PORT; if (HAS_EXTENDED_IDS(ha)) @@ -1677,13 +1679,13 @@ qla2x00_login_local_device(scsi_qla_host_t *ha, fc_port_t *fcport, DEBUG(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x " "mb[6]=%x mb[7]=%x.\n", __func__, ha->host_no, rval, - mcp->mb[0], mcp->mb[1], mcp->mb[6], mcp->mb[7]);) + mcp->mb[0], mcp->mb[1], mcp->mb[6], mcp->mb[7])); DEBUG2_3(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x " "mb[6]=%x mb[7]=%x.\n", __func__, ha->host_no, rval, - mcp->mb[0], mcp->mb[1], mcp->mb[6], mcp->mb[7]);) + mcp->mb[0], mcp->mb[1], mcp->mb[6], mcp->mb[7])); } else { /*EMPTY*/ - DEBUG3(printk("%s(%ld): done.\n", __func__, ha->host_no);) + DEBUG3(printk("%s(%ld): done.\n", __func__, ha->host_no)); } return (rval); @@ -1697,7 +1699,7 @@ qla24xx_fabric_logout(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain, struct logio_entry_24xx *lg; dma_addr_t lg_dma; - DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);) + DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); lg = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &lg_dma); if (lg == NULL) { @@ -1718,7 +1720,7 @@ qla24xx_fabric_logout(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain, rval = qla2x00_issue_iocb(ha, lg, lg_dma, 0); if (rval != QLA_SUCCESS) { DEBUG2_3_11(printk("%s(%ld): failed to issue Logout IOCB " - "(%x).\n", __func__, ha->host_no, rval);) + "(%x).\n", __func__, ha->host_no, rval)); } else if (lg->entry_status != 0) { DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " "-- error status (%x).\n", __func__, ha->host_no, @@ -1729,10 +1731,10 @@ qla24xx_fabric_logout(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain, "-- completion status (%x) ioparam=%x/%x.\n", __func__, ha->host_no, le16_to_cpu(lg->comp_status), le32_to_cpu(lg->io_parameter[0]), - le32_to_cpu(lg->io_parameter[1]));) + le32_to_cpu(lg->io_parameter[1]))); } else { /*EMPTY*/ - DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no);) + DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); } dma_pool_free(ha->s_dma_pool, lg, lg_dma); @@ -1765,7 +1767,7 @@ qla2x00_fabric_logout(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain, mbx_cmd_t *mcp = &mc; DEBUG11(printk("qla2x00_fabric_logout(%ld): entered.\n", - ha->host_no);) + ha->host_no)); mcp->mb[0] = MBC_LOGOUT_FABRIC_PORT; mcp->out_mb = MBX_1|MBX_0; @@ -1785,11 +1787,11 @@ qla2x00_fabric_logout(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain, if (rval != QLA_SUCCESS) { /*EMPTY*/ DEBUG2_3_11(printk("qla2x00_fabric_logout(%ld): failed=%x " - "mbx1=%x.\n", ha->host_no, rval, mcp->mb[1]);) + "mbx1=%x.\n", ha->host_no, rval, mcp->mb[1])); } else { /*EMPTY*/ DEBUG11(printk("qla2x00_fabric_logout(%ld): done.\n", - ha->host_no);) + ha->host_no)); } return rval; @@ -1818,7 +1820,7 @@ qla2x00_full_login_lip(scsi_qla_host_t *ha) mbx_cmd_t *mcp = &mc; DEBUG11(printk("qla2x00_full_login_lip(%ld): entered.\n", - ha->host_no);) + ha->host_no)); mcp->mb[0] = MBC_LIP_FULL_LOGIN; mcp->mb[1] = 0; @@ -1833,11 +1835,11 @@ qla2x00_full_login_lip(scsi_qla_host_t *ha) if (rval != QLA_SUCCESS) { /*EMPTY*/ DEBUG2_3_11(printk("qla2x00_full_login_lip(%ld): failed=%x.\n", - ha->host_no, rval);) + ha->host_no, rval)); } else { /*EMPTY*/ DEBUG11(printk("qla2x00_full_login_lip(%ld): done.\n", - ha->host_no);) + ha->host_no)); } return rval; @@ -1864,7 +1866,7 @@ qla2x00_get_id_list(scsi_qla_host_t *ha, void *id_list, dma_addr_t id_list_dma, mbx_cmd_t *mcp = &mc; DEBUG11(printk("qla2x00_get_id_list(%ld): entered.\n", - ha->host_no);) + ha->host_no)); if (id_list == NULL) return QLA_FUNCTION_FAILED; @@ -1893,11 +1895,11 @@ qla2x00_get_id_list(scsi_qla_host_t *ha, void *id_list, dma_addr_t id_list_dma, if (rval != QLA_SUCCESS) { /*EMPTY*/ DEBUG2_3_11(printk("qla2x00_get_id_list(%ld): failed=%x.\n", - ha->host_no, rval);) + ha->host_no, rval)); } else { *entries = mcp->mb[1]; DEBUG11(printk("qla2x00_get_id_list(%ld): done.\n", - ha->host_no);) + ha->host_no)); } return rval; @@ -1936,7 +1938,7 @@ qla2x00_get_resource_cnts(scsi_qla_host_t *ha, uint16_t *cur_xchg_cnt, if (rval != QLA_SUCCESS) { /*EMPTY*/ DEBUG2_3_11(printk("%s(%ld): failed = %x.\n", __func__, - ha->host_no, mcp->mb[0]);) + ha->host_no, mcp->mb[0])); } else { DEBUG11(printk("%s(%ld): done. mb1=%x mb2=%x mb3=%x mb6=%x " "mb7=%x mb10=%x.\n", __func__, ha->host_no, @@ -2045,7 +2047,7 @@ qla2x00_get_link_status(scsi_qla_host_t *ha, uint16_t loop_id, link_stat_t *stat_buf; dma_addr_t stat_buf_dma; - DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);) + DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); stat_buf = dma_pool_alloc(ha->s_dma_pool, GFP_ATOMIC, &stat_buf_dma); if (stat_buf == NULL) { @@ -2083,7 +2085,7 @@ qla2x00_get_link_status(scsi_qla_host_t *ha, uint16_t loop_id, if (rval == QLA_SUCCESS) { if (mcp->mb[0] != MBS_COMMAND_COMPLETE) { DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n", - __func__, ha->host_no, mcp->mb[0]);) + __func__, ha->host_no, mcp->mb[0])); status[0] = mcp->mb[0]; rval = BIT_1; } else { @@ -2108,12 +2110,12 @@ qla2x00_get_link_status(scsi_qla_host_t *ha, uint16_t loop_id, stat_buf->loss_sync_cnt, stat_buf->loss_sig_cnt, stat_buf->prim_seq_err_cnt, stat_buf->inval_xmit_word_cnt, - stat_buf->inval_crc_cnt);) + stat_buf->inval_crc_cnt)); } } else { /* Failed. */ DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, - ha->host_no, rval);) + ha->host_no, rval)); rval = BIT_1; } @@ -2132,7 +2134,7 @@ qla24xx_get_isp_stats(scsi_qla_host_t *ha, uint32_t *dwbuf, uint32_t dwords, uint32_t *sbuf, *siter; dma_addr_t sbuf_dma; - DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);) + DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); if (dwords > (DMA_POOL_SIZE / 4)) { DEBUG2_3_11(printk("%s(%ld): Unabled to retrieve %d DWORDs " @@ -2196,7 +2198,7 @@ qla24xx_abort_command(scsi_qla_host_t *ha, srb_t *sp) dma_addr_t abt_dma; uint32_t handle; - DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);) + DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); fcport = sp->fcport; @@ -2229,7 +2231,7 @@ qla24xx_abort_command(scsi_qla_host_t *ha, srb_t *sp) rval = qla2x00_issue_iocb(ha, abt, abt_dma, 0); if (rval != QLA_SUCCESS) { DEBUG2_3_11(printk("%s(%ld): failed to issue IOCB (%x).\n", - __func__, ha->host_no, rval);) + __func__, ha->host_no, rval)); } else if (abt->entry_status != 0) { DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " "-- error status (%x).\n", __func__, ha->host_no, @@ -2238,10 +2240,10 @@ qla24xx_abort_command(scsi_qla_host_t *ha, srb_t *sp) } else if (abt->nport_handle != __constant_cpu_to_le16(0)) { DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " "-- completion status (%x).\n", __func__, ha->host_no, - le16_to_cpu(abt->nport_handle));) + le16_to_cpu(abt->nport_handle))); rval = QLA_FUNCTION_FAILED; } else { - DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no);) + DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); sp->flags |= SRB_ABORT_PENDING; } @@ -2268,7 +2270,7 @@ qla24xx_abort_target(fc_port_t *fcport) if (fcport == NULL) return 0; - DEBUG11(printk("%s(%ld): entered.\n", __func__, fcport->ha->host_no);) + DEBUG11(printk("%s(%ld): entered.\n", __func__, fcport->ha->host_no)); ha = fcport->ha; tsk = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &tsk_dma); @@ -2290,7 +2292,7 @@ qla24xx_abort_target(fc_port_t *fcport) rval = qla2x00_issue_iocb(ha, tsk, tsk_dma, 0); if (rval != QLA_SUCCESS) { DEBUG2_3_11(printk("%s(%ld): failed to issue Target Reset IOCB " - "(%x).\n", __func__, ha->host_no, rval);) + "(%x).\n", __func__, ha->host_no, rval)); goto atarget_done; } else if (tsk->p.sts.entry_status != 0) { DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " @@ -2302,7 +2304,7 @@ qla24xx_abort_target(fc_port_t *fcport) __constant_cpu_to_le16(CS_COMPLETE)) { DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " "-- completion status (%x).\n", __func__, - ha->host_no, le16_to_cpu(tsk->p.sts.comp_status));) + ha->host_no, le16_to_cpu(tsk->p.sts.comp_status))); rval = QLA_FUNCTION_FAILED; goto atarget_done; } @@ -2311,9 +2313,9 @@ qla24xx_abort_target(fc_port_t *fcport) rval = qla2x00_marker(ha, fcport->loop_id, 0, MK_SYNC_ID); if (rval != QLA_SUCCESS) { DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB " - "(%x).\n", __func__, ha->host_no, rval);) + "(%x).\n", __func__, ha->host_no, rval)); } else { - DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no);) + DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); } atarget_done: @@ -2460,3 +2462,81 @@ qla2x00_stop_firmware(scsi_qla_host_t *ha) return rval; } + +int +qla2x00_trace_control(scsi_qla_host_t *ha, uint16_t ctrl, dma_addr_t eft_dma, + uint16_t buffers) +{ + int rval; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + + if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha)) + return QLA_FUNCTION_FAILED; + + DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); + + mcp->mb[0] = MBC_TRACE_CONTROL; + mcp->mb[1] = ctrl; + mcp->out_mb = MBX_1|MBX_0; + mcp->in_mb = MBX_1|MBX_0; + if (ctrl == TC_ENABLE) { + mcp->mb[2] = LSW(eft_dma); + mcp->mb[3] = MSW(eft_dma); + mcp->mb[4] = LSW(MSD(eft_dma)); + mcp->mb[5] = MSW(MSD(eft_dma)); + mcp->mb[6] = buffers; + mcp->mb[7] = buffers; + mcp->out_mb |= MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2; + } + mcp->tov = 30; + mcp->flags = 0; + rval = qla2x00_mailbox_command(ha, mcp); + + if (rval != QLA_SUCCESS) { + DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n", + __func__, ha->host_no, rval, mcp->mb[0], mcp->mb[1])); + } else { + DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); + } + + return rval; +} + +int +qla2x00_read_sfp(scsi_qla_host_t *ha, dma_addr_t sfp_dma, uint16_t addr, + uint16_t off, uint16_t count) +{ + int rval; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + + if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha)) + return QLA_FUNCTION_FAILED; + + DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); + + mcp->mb[0] = MBC_READ_SFP; + mcp->mb[1] = addr; + mcp->mb[2] = MSW(sfp_dma); + mcp->mb[3] = LSW(sfp_dma); + mcp->mb[6] = MSW(MSD(sfp_dma)); + mcp->mb[7] = LSW(MSD(sfp_dma)); + mcp->mb[8] = count; + mcp->mb[9] = off; + mcp->mb[10] = 0; + mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; + mcp->in_mb = MBX_0; + mcp->tov = 30; + mcp->flags = 0; + rval = qla2x00_mailbox_command(ha, mcp); + + if (rval != QLA_SUCCESS) { + DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__, + ha->host_no, rval, mcp->mb[0])); + } else { + DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); + } + + return rval; +} diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index ccaad0b08d3..65cbe2f5eea 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -39,14 +39,14 @@ MODULE_PARM_DESC(ql2xlogintimeout, int qlport_down_retry = 30; module_param(qlport_down_retry, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(qlport_down_retry, - "Maximum number of command retries to a port that returns" + "Maximum number of command retries to a port that returns " "a PORT-DOWN status."); int ql2xplogiabsentdevice; module_param(ql2xplogiabsentdevice, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xplogiabsentdevice, "Option to enable PLOGI to devices that are not present after " - "a Fabric scan. This is needed for several broken switches." + "a Fabric scan. This is needed for several broken switches. " "Default is 0 - no PLOGI. 1 - perfom PLOGI."); int ql2xloginretrycount = 0; @@ -54,6 +54,19 @@ module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xloginretrycount, "Specify an alternate value for the NVRAM login retry count."); +int ql2xallocfwdump = 1; +module_param(ql2xallocfwdump, int, S_IRUGO|S_IRUSR); +MODULE_PARM_DESC(ql2xallocfwdump, + "Option to enable allocation of memory for a firmware dump " + "during HBA initialization. Memory allocation requirements " + "vary by ISP type. Default is 1 - allocate memory."); + +int extended_error_logging; +module_param(extended_error_logging, int, S_IRUGO|S_IRUSR); +MODULE_PARM_DESC(extended_error_logging, + "Option to enable extended error logging, " + "Default is 0 - no logging. 1 - log errors."); + static void qla2x00_free_device(scsi_qla_host_t *); static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha); @@ -624,7 +637,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) DEBUG2(printk("%s(%ld): aborting sp %p from RISC. pid=%ld.\n", __func__, ha->host_no, sp, serial)); - DEBUG3(qla2x00_print_scsi_cmd(cmd);) + DEBUG3(qla2x00_print_scsi_cmd(cmd)); spin_unlock_irqrestore(&ha->hardware_lock, flags); if (ha->isp_ops.abort_command(ha, sp)) { @@ -731,7 +744,6 @@ qla2xxx_eh_device_reset(struct scsi_cmnd *cmd) { scsi_qla_host_t *ha = to_qla_host(cmd->device->host); fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata; - srb_t *sp; int ret; unsigned int id, lun; unsigned long serial; @@ -742,8 +754,7 @@ qla2xxx_eh_device_reset(struct scsi_cmnd *cmd) lun = cmd->device->lun; serial = cmd->serial_number; - sp = (srb_t *) CMD_SP(cmd); - if (!sp || !fcport) + if (!fcport) return ret; qla_printk(KERN_INFO, ha, @@ -766,7 +777,7 @@ qla2xxx_eh_device_reset(struct scsi_cmnd *cmd) #endif } else { DEBUG2(printk(KERN_INFO - "%s failed: loop not ready\n",__func__);) + "%s failed: loop not ready\n",__func__)); } if (ret == FAILED) { @@ -862,7 +873,6 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd) { scsi_qla_host_t *ha = to_qla_host(cmd->device->host); fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata; - srb_t *sp; int ret; unsigned int id, lun; unsigned long serial; @@ -873,8 +883,7 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd) lun = cmd->device->lun; serial = cmd->serial_number; - sp = (srb_t *) CMD_SP(cmd); - if (!sp || !fcport) + if (!fcport) return ret; qla_printk(KERN_INFO, ha, @@ -923,7 +932,6 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) { scsi_qla_host_t *ha = to_qla_host(cmd->device->host); fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata; - srb_t *sp; int ret; unsigned int id, lun; unsigned long serial; @@ -934,8 +942,7 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) lun = cmd->device->lun; serial = cmd->serial_number; - sp = (srb_t *) CMD_SP(cmd); - if (!sp || !fcport) + if (!fcport) return ret; qla_printk(KERN_INFO, ha, @@ -1021,12 +1028,12 @@ qla2x00_loop_reset(scsi_qla_host_t *ha) /* Empty */ DEBUG2_3(printk("%s(%ld): **** FAILED ****\n", __func__, - ha->host_no);) + ha->host_no)); } else { /* Empty */ DEBUG3(printk("%s(%ld): exiting normally.\n", __func__, - ha->host_no);) + ha->host_no)); } return(status); @@ -1324,7 +1331,8 @@ qla24xx_disable_intrs(scsi_qla_host_t *ha) /* * PCI driver interface */ -static int qla2x00_probe_one(struct pci_dev *pdev) +static int __devinit +qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) { int ret = -ENODEV; device_reg_t __iomem *reg; @@ -1405,7 +1413,6 @@ static int qla2x00_probe_one(struct pci_dev *pdev) ha->isp_ops.read_nvram = qla2x00_read_nvram_data; ha->isp_ops.write_nvram = qla2x00_write_nvram_data; ha->isp_ops.fw_dump = qla2100_fw_dump; - ha->isp_ops.ascii_fw_dump = qla2100_ascii_fw_dump; ha->isp_ops.read_optrom = qla2x00_read_optrom_data; ha->isp_ops.write_optrom = qla2x00_write_optrom_data; if (IS_QLA2100(ha)) { @@ -1432,7 +1439,6 @@ static int qla2x00_probe_one(struct pci_dev *pdev) ha->isp_ops.pci_config = qla2300_pci_config; ha->isp_ops.intr_handler = qla2300_intr_handler; ha->isp_ops.fw_dump = qla2300_fw_dump; - ha->isp_ops.ascii_fw_dump = qla2300_ascii_fw_dump; ha->isp_ops.beacon_on = qla2x00_beacon_on; ha->isp_ops.beacon_off = qla2x00_beacon_off; ha->isp_ops.beacon_blink = qla2x00_beacon_blink; @@ -1469,7 +1475,6 @@ static int qla2x00_probe_one(struct pci_dev *pdev) ha->isp_ops.read_nvram = qla24xx_read_nvram_data; ha->isp_ops.write_nvram = qla24xx_write_nvram_data; ha->isp_ops.fw_dump = qla24xx_fw_dump; - ha->isp_ops.ascii_fw_dump = qla24xx_ascii_fw_dump; ha->isp_ops.read_optrom = qla24xx_read_optrom_data; ha->isp_ops.write_optrom = qla24xx_write_optrom_data; ha->isp_ops.beacon_on = qla24xx_beacon_on; @@ -1541,7 +1546,7 @@ static int qla2x00_probe_one(struct pci_dev *pdev) host->transportt = qla2xxx_transport_template; ret = request_irq(pdev->irq, ha->isp_ops.intr_handler, - SA_INTERRUPT|SA_SHIRQ, QLA2XXX_DRIVER_NAME, ha); + IRQF_DISABLED|IRQF_SHARED, QLA2XXX_DRIVER_NAME, ha); if (ret) { qla_printk(KERN_WARNING, ha, "Failed to reserve interrupt %d already in use.\n", @@ -1640,7 +1645,8 @@ probe_out: return ret; } -static void qla2x00_remove_one(struct pci_dev *pdev) +static void __devexit +qla2x00_remove_one(struct pci_dev *pdev) { scsi_qla_host_t *ha; @@ -1678,6 +1684,9 @@ qla2x00_free_device(scsi_qla_host_t *ha) kthread_stop(t); } + if (ha->eft) + qla2x00_trace_control(ha, TC_DISABLE, 0, 0); + /* Stop currently executing firmware. */ qla2x00_stop_firmware(ha); @@ -1899,17 +1908,6 @@ qla2x00_mem_alloc(scsi_qla_host_t *ha) } memset(ha->init_cb, 0, ha->init_cb_size); - /* Allocate ioctl related memory. */ - if (qla2x00_alloc_ioctl_mem(ha)) { - qla_printk(KERN_WARNING, ha, - "Memory Allocation failed - ioctl_mem\n"); - - qla2x00_mem_free(ha); - msleep(100); - - continue; - } - if (qla2x00_allocate_sp_pool(ha)) { qla_printk(KERN_WARNING, ha, "Memory Allocation failed - " @@ -1972,6 +1970,26 @@ qla2x00_mem_alloc(scsi_qla_host_t *ha) continue; } memset(ha->ct_sns, 0, sizeof(struct ct_sns_pkt)); + + if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) { + /* + * Get consistent memory allocated for SFP + * block. + */ + ha->sfp_data = dma_pool_alloc(ha->s_dma_pool, + GFP_KERNEL, &ha->sfp_data_dma); + if (ha->sfp_data == NULL) { + qla_printk(KERN_WARNING, ha, + "Memory Allocation failed - " + "sfp_data\n"); + + qla2x00_mem_free(ha); + msleep(100); + + continue; + } + memset(ha->sfp_data, 0, SFP_BLOCK_SIZE); + } } /* Done all allocations without any error. */ @@ -2006,12 +2024,16 @@ qla2x00_mem_free(scsi_qla_host_t *ha) return; } - /* free ioctl memory */ - qla2x00_free_ioctl_mem(ha); - /* free sp pool */ qla2x00_free_sp_pool(ha); + if (ha->fw_dump) { + if (ha->eft) + dma_free_coherent(&ha->pdev->dev, + ntohl(ha->fw_dump->eft_size), ha->eft, ha->eft_dma); + vfree(ha->fw_dump); + } + if (ha->sns_cmd) dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt), ha->sns_cmd, ha->sns_cmd_dma); @@ -2020,6 +2042,9 @@ qla2x00_mem_free(scsi_qla_host_t *ha) dma_free_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt), ha->ct_sns, ha->ct_sns_dma); + if (ha->sfp_data) + dma_pool_free(ha->s_dma_pool, ha->sfp_data, ha->sfp_data_dma); + if (ha->ms_iocb) dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma); @@ -2043,6 +2068,8 @@ qla2x00_mem_free(scsi_qla_host_t *ha) (ha->request_q_length + 1) * sizeof(request_t), ha->request_ring, ha->request_dma); + ha->eft = NULL; + ha->eft_dma = 0; ha->sns_cmd = NULL; ha->sns_cmd_dma = 0; ha->ct_sns = NULL; @@ -2071,13 +2098,9 @@ qla2x00_mem_free(scsi_qla_host_t *ha) } INIT_LIST_HEAD(&ha->fcports); - vfree(ha->fw_dump); - vfree(ha->fw_dump_buffer); - ha->fw_dump = NULL; ha->fw_dumped = 0; ha->fw_dump_reading = 0; - ha->fw_dump_buffer = NULL; vfree(ha->optrom_buffer); } @@ -2215,9 +2238,6 @@ qla2x00_do_dpc(void *data) next_loopid = 0; list_for_each_entry(fcport, &ha->fcports, list) { - if (fcport->port_type != FCT_TARGET) - continue; - /* * If the port is not ONLINE then try to login * to it if we haven't run out of retries. @@ -2617,40 +2637,16 @@ static struct pci_device_id qla2xxx_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl); -static int __devinit -qla2xxx_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) -{ - return qla2x00_probe_one(pdev); -} - -static void __devexit -qla2xxx_remove_one(struct pci_dev *pdev) -{ - qla2x00_remove_one(pdev); -} - static struct pci_driver qla2xxx_pci_driver = { .name = QLA2XXX_DRIVER_NAME, .driver = { .owner = THIS_MODULE, }, .id_table = qla2xxx_pci_tbl, - .probe = qla2xxx_probe_one, - .remove = __devexit_p(qla2xxx_remove_one), + .probe = qla2x00_probe_one, + .remove = __devexit_p(qla2x00_remove_one), }; -static inline int -qla2x00_pci_module_init(void) -{ - return pci_module_init(&qla2xxx_pci_driver); -} - -static inline void -qla2x00_pci_module_exit(void) -{ - pci_unregister_driver(&qla2xxx_pci_driver); -} - /** * qla2x00_module_init - Module initialization. **/ @@ -2670,16 +2666,16 @@ qla2x00_module_init(void) /* Derive version string. */ strcpy(qla2x00_version_str, QLA2XXX_VERSION); -#if DEBUG_QLA2100 - strcat(qla2x00_version_str, "-debug"); -#endif + if (extended_error_logging) + strcat(qla2x00_version_str, "-debug"); + qla2xxx_transport_template = fc_attach_transport(&qla2xxx_transport_functions); if (!qla2xxx_transport_template) return -ENODEV; printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n"); - ret = qla2x00_pci_module_init(); + ret = pci_register_driver(&qla2xxx_pci_driver); if (ret) { kmem_cache_destroy(srb_cachep); fc_release_transport(qla2xxx_transport_template); @@ -2693,7 +2689,7 @@ qla2x00_module_init(void) static void __exit qla2x00_module_exit(void) { - qla2x00_pci_module_exit(); + pci_unregister_driver(&qla2xxx_pci_driver); qla2x00_release_firmware(); kmem_cache_destroy(srb_cachep); fc_release_transport(qla2xxx_transport_template); diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 6b315521bd8..971259032ef 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,9 +7,9 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.01.05-k2" +#define QLA2XXX_VERSION "8.01.07-k1" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 1 -#define QLA_DRIVER_PATCH_VER 5 +#define QLA_DRIVER_PATCH_VER 7 #define QLA_DRIVER_BETA_VER 0 diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c index 2203103adce..5b2f0741a55 100644 --- a/drivers/scsi/qlogicpti.c +++ b/drivers/scsi/qlogicpti.c @@ -1,6 +1,6 @@ /* qlogicpti.c: Performance Technologies QlogicISP sbus card driver. * - * Copyright (C) 1996 David S. Miller (davem@caipfs.rutgers.edu) + * Copyright (C) 1996, 2006 David S. Miller (davem@davemloft.net) * * A lot of this driver was directly stolen from Erik H. Moe's PCI * Qlogic ISP driver. Mucho kudos to him for this code. @@ -46,8 +46,6 @@ #include <scsi/scsi_tcq.h> #include <scsi/scsi_host.h> - - #define MAX_TARGETS 16 #define MAX_LUNS 8 /* 32 for 1.31 F/W */ @@ -57,7 +55,6 @@ static struct qlogicpti *qptichain = NULL; static DEFINE_SPINLOCK(qptichain_lock); -static int qptis_running = 0; #define PACKB(a, b) (((a)<<4)|(b)) @@ -721,7 +718,7 @@ static int __init qpti_register_irq(struct qlogicpti *qpti) * sanely maintain. */ if (request_irq(qpti->irq, qpti_intr, - SA_SHIRQ, "Qlogic/PTI", qpti)) + IRQF_SHARED, "Qlogic/PTI", qpti)) goto fail; printk("qpti%d: IRQ %d ", qpti->qpti_id, qpti->irq); @@ -815,173 +812,6 @@ static int __init qpti_map_queues(struct qlogicpti *qpti) return 0; } -/* Detect all PTI Qlogic ISP's in the machine. */ -static int __init qlogicpti_detect(struct scsi_host_template *tpnt) -{ - struct qlogicpti *qpti; - struct Scsi_Host *qpti_host; - struct sbus_bus *sbus; - struct sbus_dev *sdev; - int nqptis = 0, nqptis_in_use = 0; - - tpnt->proc_name = "qlogicpti"; - for_each_sbus(sbus) { - for_each_sbusdev(sdev, sbus) { - /* Is this a red snapper? */ - if (strcmp(sdev->prom_name, "ptisp") && - strcmp(sdev->prom_name, "PTI,ptisp") && - strcmp(sdev->prom_name, "QLGC,isp") && - strcmp(sdev->prom_name, "SUNW,isp")) - continue; - - /* Sometimes Antares cards come up not completely - * setup, and we get a report of a zero IRQ. - * Skip over them in such cases so we survive. - */ - if (sdev->irqs[0] == 0) { - printk("qpti%d: Adapter reports no interrupt, " - "skipping over this card.", nqptis); - continue; - } - - /* Yep, register and allocate software state. */ - qpti_host = scsi_register(tpnt, sizeof(struct qlogicpti)); - if (!qpti_host) { - printk("QPTI: Cannot register PTI Qlogic ISP SCSI host"); - continue; - } - qpti = (struct qlogicpti *) qpti_host->hostdata; - - /* We are wide capable, 16 targets. */ - qpti_host->max_id = MAX_TARGETS; - - /* Setup back pointers and misc. state. */ - qpti->qhost = qpti_host; - qpti->sdev = sdev; - qpti->qpti_id = nqptis++; - qpti->prom_node = sdev->prom_node; - prom_getstring(qpti->prom_node, "name", - qpti->prom_name, - sizeof(qpti->prom_name)); - - /* This is not correct, actually. There's a switch - * on the PTI cards that put them into "emulation" - * mode- i.e., report themselves as QLGC,isp - * instead of PTI,ptisp. The only real substantive - * difference between non-pti and pti cards is - * the tmon register. Which is possibly even - * there for Qlogic cards, but non-functional. - */ - qpti->is_pti = (strcmp (qpti->prom_name, "QLGC,isp") != 0); - - qpti_chain_add(qpti); - if (qpti_map_regs(qpti) < 0) - goto fail_unlink; - - if (qpti_register_irq(qpti) < 0) - goto fail_unmap_regs; - - qpti_get_scsi_id(qpti); - qpti_get_bursts(qpti); - qpti_get_clock(qpti); - - /* Clear out scsi_cmnd array. */ - memset(qpti->cmd_slots, 0, sizeof(qpti->cmd_slots)); - - if (qpti_map_queues(qpti) < 0) - goto fail_free_irq; - - /* Load the firmware. */ - if (qlogicpti_load_firmware(qpti)) - goto fail_unmap_queues; - if (qpti->is_pti) { - /* Check the PTI status reg. */ - if (qlogicpti_verify_tmon(qpti)) - goto fail_unmap_queues; - } - - /* Reset the ISP and init res/req queues. */ - if (qlogicpti_reset_hardware(qpti_host)) - goto fail_unmap_queues; - - printk("(Firmware v%d.%d.%d)", qpti->fware_majrev, - qpti->fware_minrev, qpti->fware_micrev); - { - char buffer[60]; - - prom_getstring (qpti->prom_node, - "isp-fcode", buffer, 60); - if (buffer[0]) - printk("(Firmware %s)", buffer); - if (prom_getbool(qpti->prom_node, "differential")) - qpti->differential = 1; - } - - printk (" [%s Wide, using %s interface]\n", - (qpti->ultra ? "Ultra" : "Fast"), - (qpti->differential ? "differential" : "single ended")); - - nqptis_in_use++; - continue; - - fail_unmap_queues: -#define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN) - sbus_free_consistent(qpti->sdev, - QSIZE(RES_QUEUE_LEN), - qpti->res_cpu, qpti->res_dvma); - sbus_free_consistent(qpti->sdev, - QSIZE(QLOGICPTI_REQ_QUEUE_LEN), - qpti->req_cpu, qpti->req_dvma); -#undef QSIZE - fail_free_irq: - free_irq(qpti->irq, qpti); - - fail_unmap_regs: - sbus_iounmap(qpti->qregs, - qpti->sdev->reg_addrs[0].reg_size); - if (qpti->is_pti) - sbus_iounmap(qpti->sreg, sizeof(unsigned char)); - fail_unlink: - qpti_chain_del(qpti); - scsi_unregister(qpti->qhost); - } - } - if (nqptis) - printk("QPTI: Total of %d PTI Qlogic/ISP hosts found, %d actually in use.\n", - nqptis, nqptis_in_use); - qptis_running = nqptis_in_use; - return nqptis; -} - -static int qlogicpti_release(struct Scsi_Host *host) -{ - struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata; - - /* Remove visibility from IRQ handlers. */ - qpti_chain_del(qpti); - - /* Shut up the card. */ - sbus_writew(0, qpti->qregs + SBUS_CTRL); - - /* Free IRQ handler and unmap Qlogic,ISP and PTI status regs. */ - free_irq(qpti->irq, qpti); - -#define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN) - sbus_free_consistent(qpti->sdev, - QSIZE(RES_QUEUE_LEN), - qpti->res_cpu, qpti->res_dvma); - sbus_free_consistent(qpti->sdev, - QSIZE(QLOGICPTI_REQ_QUEUE_LEN), - qpti->req_cpu, qpti->req_dvma); -#undef QSIZE - - sbus_iounmap(qpti->qregs, qpti->sdev->reg_addrs[0].reg_size); - if (qpti->is_pti) - sbus_iounmap(qpti->sreg, sizeof(unsigned char)); - - return 0; -} - const char *qlogicpti_info(struct Scsi_Host *host) { static char buf[80]; @@ -1044,7 +874,7 @@ static inline int load_cmd(struct scsi_cmnd *Cmnd, struct Command_Entry *cmd, if (Cmnd->use_sg) { int sg_count; - sg = (struct scatterlist *) Cmnd->buffer; + sg = (struct scatterlist *) Cmnd->request_buffer; sg_count = sbus_map_sg(qpti->sdev, sg, Cmnd->use_sg, Cmnd->sc_data_direction); ds = cmd->dataseg; @@ -1448,7 +1278,7 @@ static struct scsi_cmnd *qlogicpti_intr_handler(struct qlogicpti *qpti) if (Cmnd->use_sg) { sbus_unmap_sg(qpti->sdev, - (struct scatterlist *)Cmnd->buffer, + (struct scatterlist *)Cmnd->request_buffer, Cmnd->use_sg, Cmnd->sc_data_direction); } else { @@ -1551,9 +1381,9 @@ static int qlogicpti_reset(struct scsi_cmnd *Cmnd) return return_status; } -static struct scsi_host_template driver_template = { - .detect = qlogicpti_detect, - .release = qlogicpti_release, +static struct scsi_host_template qpti_template = { + .module = THIS_MODULE, + .name = "qlogicpti", .info = qlogicpti_info, .queuecommand = qlogicpti_queuecommand_slow, .eh_abort_handler = qlogicpti_abort, @@ -1565,8 +1395,189 @@ static struct scsi_host_template driver_template = { .use_clustering = ENABLE_CLUSTERING, }; +static int __devinit qpti_sbus_probe(struct of_device *dev, const struct of_device_id *match) +{ + static int nqptis; + struct sbus_dev *sdev = to_sbus_device(&dev->dev); + struct device_node *dp = dev->node; + struct scsi_host_template *tpnt = match->data; + struct Scsi_Host *host; + struct qlogicpti *qpti; + char *fcode; + + /* Sometimes Antares cards come up not completely + * setup, and we get a report of a zero IRQ. + */ + if (sdev->irqs[0] == 0) + return -ENODEV; + + host = scsi_host_alloc(tpnt, sizeof(struct qlogicpti)); + if (!host) + return -ENOMEM; + + qpti = (struct qlogicpti *) host->hostdata; + + host->max_id = MAX_TARGETS; + qpti->qhost = host; + qpti->sdev = sdev; + qpti->qpti_id = nqptis; + qpti->prom_node = sdev->prom_node; + strcpy(qpti->prom_name, sdev->ofdev.node->name); + qpti->is_pti = strcmp(qpti->prom_name, "QLGC,isp"); + + if (qpti_map_regs(qpti) < 0) + goto fail_unlink; + + if (qpti_register_irq(qpti) < 0) + goto fail_unmap_regs; + + qpti_get_scsi_id(qpti); + qpti_get_bursts(qpti); + qpti_get_clock(qpti); + + /* Clear out scsi_cmnd array. */ + memset(qpti->cmd_slots, 0, sizeof(qpti->cmd_slots)); + + if (qpti_map_queues(qpti) < 0) + goto fail_free_irq; + + /* Load the firmware. */ + if (qlogicpti_load_firmware(qpti)) + goto fail_unmap_queues; + if (qpti->is_pti) { + /* Check the PTI status reg. */ + if (qlogicpti_verify_tmon(qpti)) + goto fail_unmap_queues; + } + + /* Reset the ISP and init res/req queues. */ + if (qlogicpti_reset_hardware(host)) + goto fail_unmap_queues; + + if (scsi_add_host(host, &dev->dev)) + goto fail_unmap_queues; + + printk("(Firmware v%d.%d.%d)", qpti->fware_majrev, + qpti->fware_minrev, qpti->fware_micrev); + + fcode = of_get_property(dp, "isp-fcode", NULL); + if (fcode && fcode[0]) + printk("(Firmware %s)", fcode); + if (of_find_property(dp, "differential", NULL) != NULL) + qpti->differential = 1; + + printk (" [%s Wide, using %s interface]\n", + (qpti->ultra ? "Ultra" : "Fast"), + (qpti->differential ? "differential" : "single ended")); + + dev_set_drvdata(&sdev->ofdev.dev, qpti); + + qpti_chain_add(qpti); + + scsi_scan_host(host); + nqptis++; + + return 0; + +fail_unmap_queues: +#define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN) + sbus_free_consistent(qpti->sdev, + QSIZE(RES_QUEUE_LEN), + qpti->res_cpu, qpti->res_dvma); + sbus_free_consistent(qpti->sdev, + QSIZE(QLOGICPTI_REQ_QUEUE_LEN), + qpti->req_cpu, qpti->req_dvma); +#undef QSIZE + +fail_unmap_regs: + sbus_iounmap(qpti->qregs, + qpti->sdev->reg_addrs[0].reg_size); + if (qpti->is_pti) + sbus_iounmap(qpti->sreg, sizeof(unsigned char)); + +fail_free_irq: + free_irq(qpti->irq, qpti); + +fail_unlink: + scsi_host_put(host); + + return -ENODEV; +} + +static int __devexit qpti_sbus_remove(struct of_device *dev) +{ + struct qlogicpti *qpti = dev_get_drvdata(&dev->dev); + + qpti_chain_del(qpti); + + scsi_remove_host(qpti->qhost); + + /* Shut up the card. */ + sbus_writew(0, qpti->qregs + SBUS_CTRL); + + /* Free IRQ handler and unmap Qlogic,ISP and PTI status regs. */ + free_irq(qpti->irq, qpti); + +#define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN) + sbus_free_consistent(qpti->sdev, + QSIZE(RES_QUEUE_LEN), + qpti->res_cpu, qpti->res_dvma); + sbus_free_consistent(qpti->sdev, + QSIZE(QLOGICPTI_REQ_QUEUE_LEN), + qpti->req_cpu, qpti->req_dvma); +#undef QSIZE + + sbus_iounmap(qpti->qregs, qpti->sdev->reg_addrs[0].reg_size); + if (qpti->is_pti) + sbus_iounmap(qpti->sreg, sizeof(unsigned char)); + + scsi_host_put(qpti->qhost); + + return 0; +} + +static struct of_device_id qpti_match[] = { + { + .name = "ptisp", + .data = &qpti_template, + }, + { + .name = "PTI,ptisp", + .data = &qpti_template, + }, + { + .name = "QLGC,isp", + .data = &qpti_template, + }, + { + .name = "SUNW,isp", + .data = &qpti_template, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, qpti_match); + +static struct of_platform_driver qpti_sbus_driver = { + .name = "qpti", + .match_table = qpti_match, + .probe = qpti_sbus_probe, + .remove = __devexit_p(qpti_sbus_remove), +}; -#include "scsi_module.c" +static int __init qpti_init(void) +{ + return of_register_driver(&qpti_sbus_driver, &sbus_bus_type); +} + +static void __exit qpti_exit(void) +{ + of_unregister_driver(&qpti_sbus_driver); +} +MODULE_DESCRIPTION("QlogicISP SBUS driver"); +MODULE_AUTHOR("David S. Miller (davem@davemloft.net)"); MODULE_LICENSE("GPL"); +MODULE_VERSION("2.0"); +module_init(qpti_init); +module_exit(qpti_exit); diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c deleted file mode 100644 index 4a71578df3c..00000000000 --- a/drivers/scsi/sata_mv.c +++ /dev/null @@ -1,2468 +0,0 @@ -/* - * sata_mv.c - Marvell SATA support - * - * Copyright 2005: EMC Corporation, all rights reserved. - * Copyright 2005 Red Hat, Inc. All rights reserved. - * - * Please ALWAYS copy linux-ide@vger.kernel.org on emails. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/blkdev.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/sched.h> -#include <linux/dma-mapping.h> -#include <linux/device.h> -#include <scsi/scsi_host.h> -#include <scsi/scsi_cmnd.h> -#include <linux/libata.h> -#include <asm/io.h> - -#define DRV_NAME "sata_mv" -#define DRV_VERSION "0.7" - -enum { - /* BAR's are enumerated in terms of pci_resource_start() terms */ - MV_PRIMARY_BAR = 0, /* offset 0x10: memory space */ - MV_IO_BAR = 2, /* offset 0x18: IO space */ - MV_MISC_BAR = 3, /* offset 0x1c: FLASH, NVRAM, SRAM */ - - MV_MAJOR_REG_AREA_SZ = 0x10000, /* 64KB */ - MV_MINOR_REG_AREA_SZ = 0x2000, /* 8KB */ - - MV_PCI_REG_BASE = 0, - MV_IRQ_COAL_REG_BASE = 0x18000, /* 6xxx part only */ - MV_IRQ_COAL_CAUSE = (MV_IRQ_COAL_REG_BASE + 0x08), - MV_IRQ_COAL_CAUSE_LO = (MV_IRQ_COAL_REG_BASE + 0x88), - MV_IRQ_COAL_CAUSE_HI = (MV_IRQ_COAL_REG_BASE + 0x8c), - MV_IRQ_COAL_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xcc), - MV_IRQ_COAL_TIME_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xd0), - - MV_SATAHC0_REG_BASE = 0x20000, - MV_FLASH_CTL = 0x1046c, - MV_GPIO_PORT_CTL = 0x104f0, - MV_RESET_CFG = 0x180d8, - - MV_PCI_REG_SZ = MV_MAJOR_REG_AREA_SZ, - MV_SATAHC_REG_SZ = MV_MAJOR_REG_AREA_SZ, - MV_SATAHC_ARBTR_REG_SZ = MV_MINOR_REG_AREA_SZ, /* arbiter */ - MV_PORT_REG_SZ = MV_MINOR_REG_AREA_SZ, - - MV_USE_Q_DEPTH = ATA_DEF_QUEUE, - - MV_MAX_Q_DEPTH = 32, - MV_MAX_Q_DEPTH_MASK = MV_MAX_Q_DEPTH - 1, - - /* CRQB needs alignment on a 1KB boundary. Size == 1KB - * CRPB needs alignment on a 256B boundary. Size == 256B - * SG count of 176 leads to MV_PORT_PRIV_DMA_SZ == 4KB - * ePRD (SG) entries need alignment on a 16B boundary. Size == 16B - */ - MV_CRQB_Q_SZ = (32 * MV_MAX_Q_DEPTH), - MV_CRPB_Q_SZ = (8 * MV_MAX_Q_DEPTH), - MV_MAX_SG_CT = 176, - MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT), - MV_PORT_PRIV_DMA_SZ = (MV_CRQB_Q_SZ + MV_CRPB_Q_SZ + MV_SG_TBL_SZ), - - MV_PORTS_PER_HC = 4, - /* == (port / MV_PORTS_PER_HC) to determine HC from 0-7 port */ - MV_PORT_HC_SHIFT = 2, - /* == (port % MV_PORTS_PER_HC) to determine hard port from 0-7 port */ - MV_PORT_MASK = 3, - - /* Host Flags */ - MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ - MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ - MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING), - MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE, - - CRQB_FLAG_READ = (1 << 0), - CRQB_TAG_SHIFT = 1, - CRQB_CMD_ADDR_SHIFT = 8, - CRQB_CMD_CS = (0x2 << 11), - CRQB_CMD_LAST = (1 << 15), - - CRPB_FLAG_STATUS_SHIFT = 8, - - EPRD_FLAG_END_OF_TBL = (1 << 31), - - /* PCI interface registers */ - - PCI_COMMAND_OFS = 0xc00, - - PCI_MAIN_CMD_STS_OFS = 0xd30, - STOP_PCI_MASTER = (1 << 2), - PCI_MASTER_EMPTY = (1 << 3), - GLOB_SFT_RST = (1 << 4), - - MV_PCI_MODE = 0xd00, - MV_PCI_EXP_ROM_BAR_CTL = 0xd2c, - MV_PCI_DISC_TIMER = 0xd04, - MV_PCI_MSI_TRIGGER = 0xc38, - MV_PCI_SERR_MASK = 0xc28, - MV_PCI_XBAR_TMOUT = 0x1d04, - MV_PCI_ERR_LOW_ADDRESS = 0x1d40, - MV_PCI_ERR_HIGH_ADDRESS = 0x1d44, - MV_PCI_ERR_ATTRIBUTE = 0x1d48, - MV_PCI_ERR_COMMAND = 0x1d50, - - PCI_IRQ_CAUSE_OFS = 0x1d58, - PCI_IRQ_MASK_OFS = 0x1d5c, - PCI_UNMASK_ALL_IRQS = 0x7fffff, /* bits 22-0 */ - - HC_MAIN_IRQ_CAUSE_OFS = 0x1d60, - HC_MAIN_IRQ_MASK_OFS = 0x1d64, - PORT0_ERR = (1 << 0), /* shift by port # */ - PORT0_DONE = (1 << 1), /* shift by port # */ - HC0_IRQ_PEND = 0x1ff, /* bits 0-8 = HC0's ports */ - HC_SHIFT = 9, /* bits 9-17 = HC1's ports */ - PCI_ERR = (1 << 18), - TRAN_LO_DONE = (1 << 19), /* 6xxx: IRQ coalescing */ - TRAN_HI_DONE = (1 << 20), /* 6xxx: IRQ coalescing */ - PORTS_0_7_COAL_DONE = (1 << 21), /* 6xxx: IRQ coalescing */ - GPIO_INT = (1 << 22), - SELF_INT = (1 << 23), - TWSI_INT = (1 << 24), - HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */ - HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE | - PORTS_0_7_COAL_DONE | GPIO_INT | TWSI_INT | - HC_MAIN_RSVD), - - /* SATAHC registers */ - HC_CFG_OFS = 0, - - HC_IRQ_CAUSE_OFS = 0x14, - CRPB_DMA_DONE = (1 << 0), /* shift by port # */ - HC_IRQ_COAL = (1 << 4), /* IRQ coalescing */ - DEV_IRQ = (1 << 8), /* shift by port # */ - - /* Shadow block registers */ - SHD_BLK_OFS = 0x100, - SHD_CTL_AST_OFS = 0x20, /* ofs from SHD_BLK_OFS */ - - /* SATA registers */ - SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */ - SATA_ACTIVE_OFS = 0x350, - PHY_MODE3 = 0x310, - PHY_MODE4 = 0x314, - PHY_MODE2 = 0x330, - MV5_PHY_MODE = 0x74, - MV5_LT_MODE = 0x30, - MV5_PHY_CTL = 0x0C, - SATA_INTERFACE_CTL = 0x050, - - MV_M2_PREAMP_MASK = 0x7e0, - - /* Port registers */ - EDMA_CFG_OFS = 0, - EDMA_CFG_Q_DEPTH = 0, /* queueing disabled */ - EDMA_CFG_NCQ = (1 << 5), - EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */ - EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */ - EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */ - - EDMA_ERR_IRQ_CAUSE_OFS = 0x8, - EDMA_ERR_IRQ_MASK_OFS = 0xc, - EDMA_ERR_D_PAR = (1 << 0), - EDMA_ERR_PRD_PAR = (1 << 1), - EDMA_ERR_DEV = (1 << 2), - EDMA_ERR_DEV_DCON = (1 << 3), - EDMA_ERR_DEV_CON = (1 << 4), - EDMA_ERR_SERR = (1 << 5), - EDMA_ERR_SELF_DIS = (1 << 7), - EDMA_ERR_BIST_ASYNC = (1 << 8), - EDMA_ERR_CRBQ_PAR = (1 << 9), - EDMA_ERR_CRPB_PAR = (1 << 10), - EDMA_ERR_INTRL_PAR = (1 << 11), - EDMA_ERR_IORDY = (1 << 12), - EDMA_ERR_LNK_CTRL_RX = (0xf << 13), - EDMA_ERR_LNK_CTRL_RX_2 = (1 << 15), - EDMA_ERR_LNK_DATA_RX = (0xf << 17), - EDMA_ERR_LNK_CTRL_TX = (0x1f << 21), - EDMA_ERR_LNK_DATA_TX = (0x1f << 26), - EDMA_ERR_TRANS_PROTO = (1 << 31), - EDMA_ERR_FATAL = (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR | - EDMA_ERR_DEV_DCON | EDMA_ERR_CRBQ_PAR | - EDMA_ERR_CRPB_PAR | EDMA_ERR_INTRL_PAR | - EDMA_ERR_IORDY | EDMA_ERR_LNK_CTRL_RX_2 | - EDMA_ERR_LNK_DATA_RX | - EDMA_ERR_LNK_DATA_TX | - EDMA_ERR_TRANS_PROTO), - - EDMA_REQ_Q_BASE_HI_OFS = 0x10, - EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */ - - EDMA_REQ_Q_OUT_PTR_OFS = 0x18, - EDMA_REQ_Q_PTR_SHIFT = 5, - - EDMA_RSP_Q_BASE_HI_OFS = 0x1c, - EDMA_RSP_Q_IN_PTR_OFS = 0x20, - EDMA_RSP_Q_OUT_PTR_OFS = 0x24, /* also contains BASE_LO */ - EDMA_RSP_Q_PTR_SHIFT = 3, - - EDMA_CMD_OFS = 0x28, - EDMA_EN = (1 << 0), - EDMA_DS = (1 << 1), - ATA_RST = (1 << 2), - - EDMA_IORDY_TMOUT = 0x34, - EDMA_ARB_CFG = 0x38, - - /* Host private flags (hp_flags) */ - MV_HP_FLAG_MSI = (1 << 0), - MV_HP_ERRATA_50XXB0 = (1 << 1), - MV_HP_ERRATA_50XXB2 = (1 << 2), - MV_HP_ERRATA_60X1B2 = (1 << 3), - MV_HP_ERRATA_60X1C0 = (1 << 4), - MV_HP_ERRATA_XX42A0 = (1 << 5), - MV_HP_50XX = (1 << 6), - MV_HP_GEN_IIE = (1 << 7), - - /* Port private flags (pp_flags) */ - MV_PP_FLAG_EDMA_EN = (1 << 0), - MV_PP_FLAG_EDMA_DS_ACT = (1 << 1), -}; - -#define IS_50XX(hpriv) ((hpriv)->hp_flags & MV_HP_50XX) -#define IS_60XX(hpriv) (((hpriv)->hp_flags & MV_HP_50XX) == 0) -#define IS_GEN_I(hpriv) IS_50XX(hpriv) -#define IS_GEN_II(hpriv) IS_60XX(hpriv) -#define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE) - -enum { - /* Our DMA boundary is determined by an ePRD being unable to handle - * anything larger than 64KB - */ - MV_DMA_BOUNDARY = 0xffffU, - - EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U, - - EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U, -}; - -enum chip_type { - chip_504x, - chip_508x, - chip_5080, - chip_604x, - chip_608x, - chip_6042, - chip_7042, -}; - -/* Command ReQuest Block: 32B */ -struct mv_crqb { - __le32 sg_addr; - __le32 sg_addr_hi; - __le16 ctrl_flags; - __le16 ata_cmd[11]; -}; - -struct mv_crqb_iie { - __le32 addr; - __le32 addr_hi; - __le32 flags; - __le32 len; - __le32 ata_cmd[4]; -}; - -/* Command ResPonse Block: 8B */ -struct mv_crpb { - __le16 id; - __le16 flags; - __le32 tmstmp; -}; - -/* EDMA Physical Region Descriptor (ePRD); A.K.A. SG */ -struct mv_sg { - __le32 addr; - __le32 flags_size; - __le32 addr_hi; - __le32 reserved; -}; - -struct mv_port_priv { - struct mv_crqb *crqb; - dma_addr_t crqb_dma; - struct mv_crpb *crpb; - dma_addr_t crpb_dma; - struct mv_sg *sg_tbl; - dma_addr_t sg_tbl_dma; - u32 pp_flags; -}; - -struct mv_port_signal { - u32 amps; - u32 pre; -}; - -struct mv_host_priv; -struct mv_hw_ops { - void (*phy_errata)(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int port); - void (*enable_leds)(struct mv_host_priv *hpriv, void __iomem *mmio); - void (*read_preamp)(struct mv_host_priv *hpriv, int idx, - void __iomem *mmio); - int (*reset_hc)(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int n_hc); - void (*reset_flash)(struct mv_host_priv *hpriv, void __iomem *mmio); - void (*reset_bus)(struct pci_dev *pdev, void __iomem *mmio); -}; - -struct mv_host_priv { - u32 hp_flags; - struct mv_port_signal signal[8]; - const struct mv_hw_ops *ops; -}; - -static void mv_irq_clear(struct ata_port *ap); -static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in); -static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); -static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in); -static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); -static void mv_phy_reset(struct ata_port *ap); -static void __mv_phy_reset(struct ata_port *ap, int can_sleep); -static void mv_host_stop(struct ata_host_set *host_set); -static int mv_port_start(struct ata_port *ap); -static void mv_port_stop(struct ata_port *ap); -static void mv_qc_prep(struct ata_queued_cmd *qc); -static void mv_qc_prep_iie(struct ata_queued_cmd *qc); -static unsigned int mv_qc_issue(struct ata_queued_cmd *qc); -static irqreturn_t mv_interrupt(int irq, void *dev_instance, - struct pt_regs *regs); -static void mv_eng_timeout(struct ata_port *ap); -static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); - -static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int port); -static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio); -static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx, - void __iomem *mmio); -static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int n_hc); -static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); -static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio); - -static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int port); -static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio); -static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, - void __iomem *mmio); -static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int n_hc); -static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); -static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio); -static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int port_no); -static void mv_stop_and_reset(struct ata_port *ap); - -static struct scsi_host_template mv_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = MV_USE_Q_DEPTH, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = MV_MAX_SG_CT / 2, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = MV_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - -static const struct ata_port_operations mv5_ops = { - .port_disable = ata_port_disable, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .phy_reset = mv_phy_reset, - - .qc_prep = mv_qc_prep, - .qc_issue = mv_qc_issue, - .data_xfer = ata_mmio_data_xfer, - - .eng_timeout = mv_eng_timeout, - - .irq_handler = mv_interrupt, - .irq_clear = mv_irq_clear, - - .scr_read = mv5_scr_read, - .scr_write = mv5_scr_write, - - .port_start = mv_port_start, - .port_stop = mv_port_stop, - .host_stop = mv_host_stop, -}; - -static const struct ata_port_operations mv6_ops = { - .port_disable = ata_port_disable, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .phy_reset = mv_phy_reset, - - .qc_prep = mv_qc_prep, - .qc_issue = mv_qc_issue, - .data_xfer = ata_mmio_data_xfer, - - .eng_timeout = mv_eng_timeout, - - .irq_handler = mv_interrupt, - .irq_clear = mv_irq_clear, - - .scr_read = mv_scr_read, - .scr_write = mv_scr_write, - - .port_start = mv_port_start, - .port_stop = mv_port_stop, - .host_stop = mv_host_stop, -}; - -static const struct ata_port_operations mv_iie_ops = { - .port_disable = ata_port_disable, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .phy_reset = mv_phy_reset, - - .qc_prep = mv_qc_prep_iie, - .qc_issue = mv_qc_issue, - - .eng_timeout = mv_eng_timeout, - - .irq_handler = mv_interrupt, - .irq_clear = mv_irq_clear, - - .scr_read = mv_scr_read, - .scr_write = mv_scr_write, - - .port_start = mv_port_start, - .port_stop = mv_port_stop, - .host_stop = mv_host_stop, -}; - -static const struct ata_port_info mv_port_info[] = { - { /* chip_504x */ - .sht = &mv_sht, - .host_flags = MV_COMMON_FLAGS, - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &mv5_ops, - }, - { /* chip_508x */ - .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &mv5_ops, - }, - { /* chip_5080 */ - .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &mv5_ops, - }, - { /* chip_604x */ - .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &mv6_ops, - }, - { /* chip_608x */ - .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | - MV_FLAG_DUAL_HC), - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &mv6_ops, - }, - { /* chip_6042 */ - .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &mv_iie_ops, - }, - { /* chip_7042 */ - .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | - MV_FLAG_DUAL_HC), - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &mv_iie_ops, - }, -}; - -static const struct pci_device_id mv_pci_tbl[] = { - {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5040), 0, 0, chip_504x}, - {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5041), 0, 0, chip_504x}, - {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5080), 0, 0, chip_5080}, - {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5081), 0, 0, chip_508x}, - - {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6040), 0, 0, chip_604x}, - {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6041), 0, 0, chip_604x}, - {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6042), 0, 0, chip_6042}, - {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6080), 0, 0, chip_608x}, - {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6081), 0, 0, chip_608x}, - - {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, 0x0241), 0, 0, chip_604x}, - {} /* terminate list */ -}; - -static struct pci_driver mv_pci_driver = { - .name = DRV_NAME, - .id_table = mv_pci_tbl, - .probe = mv_init_one, - .remove = ata_pci_remove_one, -}; - -static const struct mv_hw_ops mv5xxx_ops = { - .phy_errata = mv5_phy_errata, - .enable_leds = mv5_enable_leds, - .read_preamp = mv5_read_preamp, - .reset_hc = mv5_reset_hc, - .reset_flash = mv5_reset_flash, - .reset_bus = mv5_reset_bus, -}; - -static const struct mv_hw_ops mv6xxx_ops = { - .phy_errata = mv6_phy_errata, - .enable_leds = mv6_enable_leds, - .read_preamp = mv6_read_preamp, - .reset_hc = mv6_reset_hc, - .reset_flash = mv6_reset_flash, - .reset_bus = mv_reset_pci_bus, -}; - -/* - * module options - */ -static int msi; /* Use PCI msi; either zero (off, default) or non-zero */ - - -/* - * Functions - */ - -static inline void writelfl(unsigned long data, void __iomem *addr) -{ - writel(data, addr); - (void) readl(addr); /* flush to avoid PCI posted write */ -} - -static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc) -{ - return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ)); -} - -static inline unsigned int mv_hc_from_port(unsigned int port) -{ - return port >> MV_PORT_HC_SHIFT; -} - -static inline unsigned int mv_hardport_from_port(unsigned int port) -{ - return port & MV_PORT_MASK; -} - -static inline void __iomem *mv_hc_base_from_port(void __iomem *base, - unsigned int port) -{ - return mv_hc_base(base, mv_hc_from_port(port)); -} - -static inline void __iomem *mv_port_base(void __iomem *base, unsigned int port) -{ - return mv_hc_base_from_port(base, port) + - MV_SATAHC_ARBTR_REG_SZ + - (mv_hardport_from_port(port) * MV_PORT_REG_SZ); -} - -static inline void __iomem *mv_ap_base(struct ata_port *ap) -{ - return mv_port_base(ap->host_set->mmio_base, ap->port_no); -} - -static inline int mv_get_hc_count(unsigned long host_flags) -{ - return ((host_flags & MV_FLAG_DUAL_HC) ? 2 : 1); -} - -static void mv_irq_clear(struct ata_port *ap) -{ -} - -/** - * mv_start_dma - Enable eDMA engine - * @base: port base address - * @pp: port private data - * - * Verify the local cache of the eDMA state is accurate with a - * WARN_ON. - * - * LOCKING: - * Inherited from caller. - */ -static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp) -{ - if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) { - writelfl(EDMA_EN, base + EDMA_CMD_OFS); - pp->pp_flags |= MV_PP_FLAG_EDMA_EN; - } - WARN_ON(!(EDMA_EN & readl(base + EDMA_CMD_OFS))); -} - -/** - * mv_stop_dma - Disable eDMA engine - * @ap: ATA channel to manipulate - * - * Verify the local cache of the eDMA state is accurate with a - * WARN_ON. - * - * LOCKING: - * Inherited from caller. - */ -static void mv_stop_dma(struct ata_port *ap) -{ - void __iomem *port_mmio = mv_ap_base(ap); - struct mv_port_priv *pp = ap->private_data; - u32 reg; - int i; - - if (MV_PP_FLAG_EDMA_EN & pp->pp_flags) { - /* Disable EDMA if active. The disable bit auto clears. - */ - writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); - pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; - } else { - WARN_ON(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)); - } - - /* now properly wait for the eDMA to stop */ - for (i = 1000; i > 0; i--) { - reg = readl(port_mmio + EDMA_CMD_OFS); - if (!(EDMA_EN & reg)) { - break; - } - udelay(100); - } - - if (EDMA_EN & reg) { - ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n"); - /* FIXME: Consider doing a reset here to recover */ - } -} - -#ifdef ATA_DEBUG -static void mv_dump_mem(void __iomem *start, unsigned bytes) -{ - int b, w; - for (b = 0; b < bytes; ) { - DPRINTK("%p: ", start + b); - for (w = 0; b < bytes && w < 4; w++) { - printk("%08x ",readl(start + b)); - b += sizeof(u32); - } - printk("\n"); - } -} -#endif - -static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes) -{ -#ifdef ATA_DEBUG - int b, w; - u32 dw; - for (b = 0; b < bytes; ) { - DPRINTK("%02x: ", b); - for (w = 0; b < bytes && w < 4; w++) { - (void) pci_read_config_dword(pdev,b,&dw); - printk("%08x ",dw); - b += sizeof(u32); - } - printk("\n"); - } -#endif -} -static void mv_dump_all_regs(void __iomem *mmio_base, int port, - struct pci_dev *pdev) -{ -#ifdef ATA_DEBUG - void __iomem *hc_base = mv_hc_base(mmio_base, - port >> MV_PORT_HC_SHIFT); - void __iomem *port_base; - int start_port, num_ports, p, start_hc, num_hcs, hc; - - if (0 > port) { - start_hc = start_port = 0; - num_ports = 8; /* shld be benign for 4 port devs */ - num_hcs = 2; - } else { - start_hc = port >> MV_PORT_HC_SHIFT; - start_port = port; - num_ports = num_hcs = 1; - } - DPRINTK("All registers for port(s) %u-%u:\n", start_port, - num_ports > 1 ? num_ports - 1 : start_port); - - if (NULL != pdev) { - DPRINTK("PCI config space regs:\n"); - mv_dump_pci_cfg(pdev, 0x68); - } - DPRINTK("PCI regs:\n"); - mv_dump_mem(mmio_base+0xc00, 0x3c); - mv_dump_mem(mmio_base+0xd00, 0x34); - mv_dump_mem(mmio_base+0xf00, 0x4); - mv_dump_mem(mmio_base+0x1d00, 0x6c); - for (hc = start_hc; hc < start_hc + num_hcs; hc++) { - hc_base = mv_hc_base(mmio_base, hc); - DPRINTK("HC regs (HC %i):\n", hc); - mv_dump_mem(hc_base, 0x1c); - } - for (p = start_port; p < start_port + num_ports; p++) { - port_base = mv_port_base(mmio_base, p); - DPRINTK("EDMA regs (port %i):\n",p); - mv_dump_mem(port_base, 0x54); - DPRINTK("SATA regs (port %i):\n",p); - mv_dump_mem(port_base+0x300, 0x60); - } -#endif -} - -static unsigned int mv_scr_offset(unsigned int sc_reg_in) -{ - unsigned int ofs; - - switch (sc_reg_in) { - case SCR_STATUS: - case SCR_CONTROL: - case SCR_ERROR: - ofs = SATA_STATUS_OFS + (sc_reg_in * sizeof(u32)); - break; - case SCR_ACTIVE: - ofs = SATA_ACTIVE_OFS; /* active is not with the others */ - break; - default: - ofs = 0xffffffffU; - break; - } - return ofs; -} - -static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in) -{ - unsigned int ofs = mv_scr_offset(sc_reg_in); - - if (0xffffffffU != ofs) { - return readl(mv_ap_base(ap) + ofs); - } else { - return (u32) ofs; - } -} - -static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) -{ - unsigned int ofs = mv_scr_offset(sc_reg_in); - - if (0xffffffffU != ofs) { - writelfl(val, mv_ap_base(ap) + ofs); - } -} - -/** - * mv_host_stop - Host specific cleanup/stop routine. - * @host_set: host data structure - * - * Disable ints, cleanup host memory, call general purpose - * host_stop. - * - * LOCKING: - * Inherited from caller. - */ -static void mv_host_stop(struct ata_host_set *host_set) -{ - struct mv_host_priv *hpriv = host_set->private_data; - struct pci_dev *pdev = to_pci_dev(host_set->dev); - - if (hpriv->hp_flags & MV_HP_FLAG_MSI) { - pci_disable_msi(pdev); - } else { - pci_intx(pdev, 0); - } - kfree(hpriv); - ata_host_stop(host_set); -} - -static inline void mv_priv_free(struct mv_port_priv *pp, struct device *dev) -{ - dma_free_coherent(dev, MV_PORT_PRIV_DMA_SZ, pp->crpb, pp->crpb_dma); -} - -static void mv_edma_cfg(struct mv_host_priv *hpriv, void __iomem *port_mmio) -{ - u32 cfg = readl(port_mmio + EDMA_CFG_OFS); - - /* set up non-NCQ EDMA configuration */ - cfg &= ~0x1f; /* clear queue depth */ - cfg &= ~EDMA_CFG_NCQ; /* clear NCQ mode */ - cfg &= ~(1 << 9); /* disable equeue */ - - if (IS_GEN_I(hpriv)) - cfg |= (1 << 8); /* enab config burst size mask */ - - else if (IS_GEN_II(hpriv)) - cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN; - - else if (IS_GEN_IIE(hpriv)) { - cfg |= (1 << 23); /* dis RX PM port mask */ - cfg &= ~(1 << 16); /* dis FIS-based switching (for now) */ - cfg &= ~(1 << 19); /* dis 128-entry queue (for now?) */ - cfg |= (1 << 18); /* enab early completion */ - cfg |= (1 << 17); /* enab host q cache */ - cfg |= (1 << 22); /* enab cutthrough */ - } - - writelfl(cfg, port_mmio + EDMA_CFG_OFS); -} - -/** - * mv_port_start - Port specific init/start routine. - * @ap: ATA channel to manipulate - * - * Allocate and point to DMA memory, init port private memory, - * zero indices. - * - * LOCKING: - * Inherited from caller. - */ -static int mv_port_start(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct mv_host_priv *hpriv = ap->host_set->private_data; - struct mv_port_priv *pp; - void __iomem *port_mmio = mv_ap_base(ap); - void *mem; - dma_addr_t mem_dma; - int rc = -ENOMEM; - - pp = kmalloc(sizeof(*pp), GFP_KERNEL); - if (!pp) - goto err_out; - memset(pp, 0, sizeof(*pp)); - - mem = dma_alloc_coherent(dev, MV_PORT_PRIV_DMA_SZ, &mem_dma, - GFP_KERNEL); - if (!mem) - goto err_out_pp; - memset(mem, 0, MV_PORT_PRIV_DMA_SZ); - - rc = ata_pad_alloc(ap, dev); - if (rc) - goto err_out_priv; - - /* First item in chunk of DMA memory: - * 32-slot command request table (CRQB), 32 bytes each in size - */ - pp->crqb = mem; - pp->crqb_dma = mem_dma; - mem += MV_CRQB_Q_SZ; - mem_dma += MV_CRQB_Q_SZ; - - /* Second item: - * 32-slot command response table (CRPB), 8 bytes each in size - */ - pp->crpb = mem; - pp->crpb_dma = mem_dma; - mem += MV_CRPB_Q_SZ; - mem_dma += MV_CRPB_Q_SZ; - - /* Third item: - * Table of scatter-gather descriptors (ePRD), 16 bytes each - */ - pp->sg_tbl = mem; - pp->sg_tbl_dma = mem_dma; - - mv_edma_cfg(hpriv, port_mmio); - - writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS); - writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK, - port_mmio + EDMA_REQ_Q_IN_PTR_OFS); - - if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0) - writelfl(pp->crqb_dma & 0xffffffff, - port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); - else - writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); - - writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS); - - if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0) - writelfl(pp->crpb_dma & 0xffffffff, - port_mmio + EDMA_RSP_Q_IN_PTR_OFS); - else - writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); - - writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK, - port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); - - /* Don't turn on EDMA here...do it before DMA commands only. Else - * we'll be unable to send non-data, PIO, etc due to restricted access - * to shadow regs. - */ - ap->private_data = pp; - return 0; - -err_out_priv: - mv_priv_free(pp, dev); -err_out_pp: - kfree(pp); -err_out: - return rc; -} - -/** - * mv_port_stop - Port specific cleanup/stop routine. - * @ap: ATA channel to manipulate - * - * Stop DMA, cleanup port memory. - * - * LOCKING: - * This routine uses the host_set lock to protect the DMA stop. - */ -static void mv_port_stop(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct mv_port_priv *pp = ap->private_data; - unsigned long flags; - - spin_lock_irqsave(&ap->host_set->lock, flags); - mv_stop_dma(ap); - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - ap->private_data = NULL; - ata_pad_free(ap, dev); - mv_priv_free(pp, dev); - kfree(pp); -} - -/** - * mv_fill_sg - Fill out the Marvell ePRD (scatter gather) entries - * @qc: queued command whose SG list to source from - * - * Populate the SG list and mark the last entry. - * - * LOCKING: - * Inherited from caller. - */ -static void mv_fill_sg(struct ata_queued_cmd *qc) -{ - struct mv_port_priv *pp = qc->ap->private_data; - unsigned int i = 0; - struct scatterlist *sg; - - ata_for_each_sg(sg, qc) { - dma_addr_t addr; - u32 sg_len, len, offset; - - addr = sg_dma_address(sg); - sg_len = sg_dma_len(sg); - - while (sg_len) { - offset = addr & MV_DMA_BOUNDARY; - len = sg_len; - if ((offset + sg_len) > 0x10000) - len = 0x10000 - offset; - - pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff); - pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16); - pp->sg_tbl[i].flags_size = cpu_to_le32(len & 0xffff); - - sg_len -= len; - addr += len; - - if (!sg_len && ata_sg_is_last(sg, qc)) - pp->sg_tbl[i].flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL); - - i++; - } - } -} - -static inline unsigned mv_inc_q_index(unsigned index) -{ - return (index + 1) & MV_MAX_Q_DEPTH_MASK; -} - -static inline void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last) -{ - u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS | - (last ? CRQB_CMD_LAST : 0); - *cmdw = cpu_to_le16(tmp); -} - -/** - * mv_qc_prep - Host specific command preparation. - * @qc: queued command to prepare - * - * This routine simply redirects to the general purpose routine - * if command is not DMA. Else, it handles prep of the CRQB - * (command request block), does some sanity checking, and calls - * the SG load routine. - * - * LOCKING: - * Inherited from caller. - */ -static void mv_qc_prep(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct mv_port_priv *pp = ap->private_data; - __le16 *cw; - struct ata_taskfile *tf; - u16 flags = 0; - unsigned in_index; - - if (ATA_PROT_DMA != qc->tf.protocol) - return; - - /* Fill in command request block - */ - if (!(qc->tf.flags & ATA_TFLAG_WRITE)) - flags |= CRQB_FLAG_READ; - WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); - flags |= qc->tag << CRQB_TAG_SHIFT; - - /* get current queue index from hardware */ - in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS) - >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; - - pp->crqb[in_index].sg_addr = - cpu_to_le32(pp->sg_tbl_dma & 0xffffffff); - pp->crqb[in_index].sg_addr_hi = - cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16); - pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags); - - cw = &pp->crqb[in_index].ata_cmd[0]; - tf = &qc->tf; - - /* Sadly, the CRQB cannot accomodate all registers--there are - * only 11 bytes...so we must pick and choose required - * registers based on the command. So, we drop feature and - * hob_feature for [RW] DMA commands, but they are needed for - * NCQ. NCQ will drop hob_nsect. - */ - switch (tf->command) { - case ATA_CMD_READ: - case ATA_CMD_READ_EXT: - case ATA_CMD_WRITE: - case ATA_CMD_WRITE_EXT: - case ATA_CMD_WRITE_FUA_EXT: - mv_crqb_pack_cmd(cw++, tf->hob_nsect, ATA_REG_NSECT, 0); - break; -#ifdef LIBATA_NCQ /* FIXME: remove this line when NCQ added */ - case ATA_CMD_FPDMA_READ: - case ATA_CMD_FPDMA_WRITE: - mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0); - mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0); - break; -#endif /* FIXME: remove this line when NCQ added */ - default: - /* The only other commands EDMA supports in non-queued and - * non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none - * of which are defined/used by Linux. If we get here, this - * driver needs work. - * - * FIXME: modify libata to give qc_prep a return value and - * return error here. - */ - BUG_ON(tf->command); - break; - } - mv_crqb_pack_cmd(cw++, tf->nsect, ATA_REG_NSECT, 0); - mv_crqb_pack_cmd(cw++, tf->hob_lbal, ATA_REG_LBAL, 0); - mv_crqb_pack_cmd(cw++, tf->lbal, ATA_REG_LBAL, 0); - mv_crqb_pack_cmd(cw++, tf->hob_lbam, ATA_REG_LBAM, 0); - mv_crqb_pack_cmd(cw++, tf->lbam, ATA_REG_LBAM, 0); - mv_crqb_pack_cmd(cw++, tf->hob_lbah, ATA_REG_LBAH, 0); - mv_crqb_pack_cmd(cw++, tf->lbah, ATA_REG_LBAH, 0); - mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0); - mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */ - - if (!(qc->flags & ATA_QCFLAG_DMAMAP)) - return; - mv_fill_sg(qc); -} - -/** - * mv_qc_prep_iie - Host specific command preparation. - * @qc: queued command to prepare - * - * This routine simply redirects to the general purpose routine - * if command is not DMA. Else, it handles prep of the CRQB - * (command request block), does some sanity checking, and calls - * the SG load routine. - * - * LOCKING: - * Inherited from caller. - */ -static void mv_qc_prep_iie(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct mv_port_priv *pp = ap->private_data; - struct mv_crqb_iie *crqb; - struct ata_taskfile *tf; - unsigned in_index; - u32 flags = 0; - - if (ATA_PROT_DMA != qc->tf.protocol) - return; - - /* Fill in Gen IIE command request block - */ - if (!(qc->tf.flags & ATA_TFLAG_WRITE)) - flags |= CRQB_FLAG_READ; - - WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); - flags |= qc->tag << CRQB_TAG_SHIFT; - - /* get current queue index from hardware */ - in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS) - >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; - - crqb = (struct mv_crqb_iie *) &pp->crqb[in_index]; - crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff); - crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16); - crqb->flags = cpu_to_le32(flags); - - tf = &qc->tf; - crqb->ata_cmd[0] = cpu_to_le32( - (tf->command << 16) | - (tf->feature << 24) - ); - crqb->ata_cmd[1] = cpu_to_le32( - (tf->lbal << 0) | - (tf->lbam << 8) | - (tf->lbah << 16) | - (tf->device << 24) - ); - crqb->ata_cmd[2] = cpu_to_le32( - (tf->hob_lbal << 0) | - (tf->hob_lbam << 8) | - (tf->hob_lbah << 16) | - (tf->hob_feature << 24) - ); - crqb->ata_cmd[3] = cpu_to_le32( - (tf->nsect << 0) | - (tf->hob_nsect << 8) - ); - - if (!(qc->flags & ATA_QCFLAG_DMAMAP)) - return; - mv_fill_sg(qc); -} - -/** - * mv_qc_issue - Initiate a command to the host - * @qc: queued command to start - * - * This routine simply redirects to the general purpose routine - * if command is not DMA. Else, it sanity checks our local - * caches of the request producer/consumer indices then enables - * DMA and bumps the request producer index. - * - * LOCKING: - * Inherited from caller. - */ -static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) -{ - void __iomem *port_mmio = mv_ap_base(qc->ap); - struct mv_port_priv *pp = qc->ap->private_data; - unsigned in_index; - u32 in_ptr; - - if (ATA_PROT_DMA != qc->tf.protocol) { - /* We're about to send a non-EDMA capable command to the - * port. Turn off EDMA so there won't be problems accessing - * shadow block, etc registers. - */ - mv_stop_dma(qc->ap); - return ata_qc_issue_prot(qc); - } - - in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS); - in_index = (in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; - - /* until we do queuing, the queue should be empty at this point */ - WARN_ON(in_index != ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) - >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK)); - - in_index = mv_inc_q_index(in_index); /* now incr producer index */ - - mv_start_dma(port_mmio, pp); - - /* and write the request in pointer to kick the EDMA to life */ - in_ptr &= EDMA_REQ_Q_BASE_LO_MASK; - in_ptr |= in_index << EDMA_REQ_Q_PTR_SHIFT; - writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS); - - return 0; -} - -/** - * mv_get_crpb_status - get status from most recently completed cmd - * @ap: ATA channel to manipulate - * - * This routine is for use when the port is in DMA mode, when it - * will be using the CRPB (command response block) method of - * returning command completion information. We check indices - * are good, grab status, and bump the response consumer index to - * prove that we're up to date. - * - * LOCKING: - * Inherited from caller. - */ -static u8 mv_get_crpb_status(struct ata_port *ap) -{ - void __iomem *port_mmio = mv_ap_base(ap); - struct mv_port_priv *pp = ap->private_data; - unsigned out_index; - u32 out_ptr; - u8 ata_status; - - out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); - out_index = (out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; - - ata_status = le16_to_cpu(pp->crpb[out_index].flags) - >> CRPB_FLAG_STATUS_SHIFT; - - /* increment our consumer index... */ - out_index = mv_inc_q_index(out_index); - - /* and, until we do NCQ, there should only be 1 CRPB waiting */ - WARN_ON(out_index != ((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) - >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK)); - - /* write out our inc'd consumer index so EDMA knows we're caught up */ - out_ptr &= EDMA_RSP_Q_BASE_LO_MASK; - out_ptr |= out_index << EDMA_RSP_Q_PTR_SHIFT; - writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); - - /* Return ATA status register for completed CRPB */ - return ata_status; -} - -/** - * mv_err_intr - Handle error interrupts on the port - * @ap: ATA channel to manipulate - * @reset_allowed: bool: 0 == don't trigger from reset here - * - * In most cases, just clear the interrupt and move on. However, - * some cases require an eDMA reset, which is done right before - * the COMRESET in mv_phy_reset(). The SERR case requires a - * clear of pending errors in the SATA SERROR register. Finally, - * if the port disabled DMA, update our cached copy to match. - * - * LOCKING: - * Inherited from caller. - */ -static void mv_err_intr(struct ata_port *ap, int reset_allowed) -{ - void __iomem *port_mmio = mv_ap_base(ap); - u32 edma_err_cause, serr = 0; - - edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); - - if (EDMA_ERR_SERR & edma_err_cause) { - sata_scr_read(ap, SCR_ERROR, &serr); - sata_scr_write_flush(ap, SCR_ERROR, serr); - } - if (EDMA_ERR_SELF_DIS & edma_err_cause) { - struct mv_port_priv *pp = ap->private_data; - pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; - } - DPRINTK(KERN_ERR "ata%u: port error; EDMA err cause: 0x%08x " - "SERR: 0x%08x\n", ap->id, edma_err_cause, serr); - - /* Clear EDMA now that SERR cleanup done */ - writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); - - /* check for fatal here and recover if needed */ - if (reset_allowed && (EDMA_ERR_FATAL & edma_err_cause)) - mv_stop_and_reset(ap); -} - -/** - * mv_host_intr - Handle all interrupts on the given host controller - * @host_set: host specific structure - * @relevant: port error bits relevant to this host controller - * @hc: which host controller we're to look at - * - * Read then write clear the HC interrupt status then walk each - * port connected to the HC and see if it needs servicing. Port - * success ints are reported in the HC interrupt status reg, the - * port error ints are reported in the higher level main - * interrupt status register and thus are passed in via the - * 'relevant' argument. - * - * LOCKING: - * Inherited from caller. - */ -static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, - unsigned int hc) -{ - void __iomem *mmio = host_set->mmio_base; - void __iomem *hc_mmio = mv_hc_base(mmio, hc); - struct ata_queued_cmd *qc; - u32 hc_irq_cause; - int shift, port, port0, hard_port, handled; - unsigned int err_mask; - - if (hc == 0) { - port0 = 0; - } else { - port0 = MV_PORTS_PER_HC; - } - - /* we'll need the HC success int register in most cases */ - hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); - if (hc_irq_cause) { - writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); - } - - VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n", - hc,relevant,hc_irq_cause); - - for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) { - u8 ata_status = 0; - struct ata_port *ap = host_set->ports[port]; - struct mv_port_priv *pp = ap->private_data; - - hard_port = mv_hardport_from_port(port); /* range 0..3 */ - handled = 0; /* ensure ata_status is set if handled++ */ - - /* Note that DEV_IRQ might happen spuriously during EDMA, - * and should be ignored in such cases. - * The cause of this is still under investigation. - */ - if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) { - /* EDMA: check for response queue interrupt */ - if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) { - ata_status = mv_get_crpb_status(ap); - handled = 1; - } - } else { - /* PIO: check for device (drive) interrupt */ - if ((DEV_IRQ << hard_port) & hc_irq_cause) { - ata_status = readb((void __iomem *) - ap->ioaddr.status_addr); - handled = 1; - /* ignore spurious intr if drive still BUSY */ - if (ata_status & ATA_BUSY) { - ata_status = 0; - handled = 0; - } - } - } - - if (ap && (ap->flags & ATA_FLAG_DISABLED)) - continue; - - err_mask = ac_err_mask(ata_status); - - shift = port << 1; /* (port * 2) */ - if (port >= MV_PORTS_PER_HC) { - shift++; /* skip bit 8 in the HC Main IRQ reg */ - } - if ((PORT0_ERR << shift) & relevant) { - mv_err_intr(ap, 1); - err_mask |= AC_ERR_OTHER; - handled = 1; - } - - if (handled) { - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (qc->flags & ATA_QCFLAG_ACTIVE)) { - VPRINTK("port %u IRQ found for qc, " - "ata_status 0x%x\n", port,ata_status); - /* mark qc status appropriately */ - if (!(qc->tf.flags & ATA_TFLAG_POLLING)) { - qc->err_mask |= err_mask; - ata_qc_complete(qc); - } - } - } - } - VPRINTK("EXIT\n"); -} - -/** - * mv_interrupt - - * @irq: unused - * @dev_instance: private data; in this case the host structure - * @regs: unused - * - * Read the read only register to determine if any host - * controllers have pending interrupts. If so, call lower level - * routine to handle. Also check for PCI errors which are only - * reported here. - * - * LOCKING: - * This routine holds the host_set lock while processing pending - * interrupts. - */ -static irqreturn_t mv_interrupt(int irq, void *dev_instance, - struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - unsigned int hc, handled = 0, n_hcs; - void __iomem *mmio = host_set->mmio_base; - struct mv_host_priv *hpriv; - u32 irq_stat; - - irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS); - - /* check the cases where we either have nothing pending or have read - * a bogus register value which can indicate HW removal or PCI fault - */ - if (!irq_stat || (0xffffffffU == irq_stat)) { - return IRQ_NONE; - } - - n_hcs = mv_get_hc_count(host_set->ports[0]->flags); - spin_lock(&host_set->lock); - - for (hc = 0; hc < n_hcs; hc++) { - u32 relevant = irq_stat & (HC0_IRQ_PEND << (hc * HC_SHIFT)); - if (relevant) { - mv_host_intr(host_set, relevant, hc); - handled++; - } - } - - hpriv = host_set->private_data; - if (IS_60XX(hpriv)) { - /* deal with the interrupt coalescing bits */ - if (irq_stat & (TRAN_LO_DONE | TRAN_HI_DONE | PORTS_0_7_COAL_DONE)) { - writelfl(0, mmio + MV_IRQ_COAL_CAUSE_LO); - writelfl(0, mmio + MV_IRQ_COAL_CAUSE_HI); - writelfl(0, mmio + MV_IRQ_COAL_CAUSE); - } - } - - if (PCI_ERR & irq_stat) { - printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n", - readl(mmio + PCI_IRQ_CAUSE_OFS)); - - DPRINTK("All regs @ PCI error\n"); - mv_dump_all_regs(mmio, -1, to_pci_dev(host_set->dev)); - - writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); - handled++; - } - spin_unlock(&host_set->lock); - - return IRQ_RETVAL(handled); -} - -static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port) -{ - void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port); - unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL; - - return hc_mmio + ofs; -} - -static unsigned int mv5_scr_offset(unsigned int sc_reg_in) -{ - unsigned int ofs; - - switch (sc_reg_in) { - case SCR_STATUS: - case SCR_ERROR: - case SCR_CONTROL: - ofs = sc_reg_in * sizeof(u32); - break; - default: - ofs = 0xffffffffU; - break; - } - return ofs; -} - -static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in) -{ - void __iomem *mmio = mv5_phy_base(ap->host_set->mmio_base, ap->port_no); - unsigned int ofs = mv5_scr_offset(sc_reg_in); - - if (ofs != 0xffffffffU) - return readl(mmio + ofs); - else - return (u32) ofs; -} - -static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) -{ - void __iomem *mmio = mv5_phy_base(ap->host_set->mmio_base, ap->port_no); - unsigned int ofs = mv5_scr_offset(sc_reg_in); - - if (ofs != 0xffffffffU) - writelfl(val, mmio + ofs); -} - -static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio) -{ - u8 rev_id; - int early_5080; - - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); - - early_5080 = (pdev->device == 0x5080) && (rev_id == 0); - - if (!early_5080) { - u32 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL); - tmp |= (1 << 0); - writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL); - } - - mv_reset_pci_bus(pdev, mmio); -} - -static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio) -{ - writel(0x0fcfffff, mmio + MV_FLASH_CTL); -} - -static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx, - void __iomem *mmio) -{ - void __iomem *phy_mmio = mv5_phy_base(mmio, idx); - u32 tmp; - - tmp = readl(phy_mmio + MV5_PHY_MODE); - - hpriv->signal[idx].pre = tmp & 0x1800; /* bits 12:11 */ - hpriv->signal[idx].amps = tmp & 0xe0; /* bits 7:5 */ -} - -static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) -{ - u32 tmp; - - writel(0, mmio + MV_GPIO_PORT_CTL); - - /* FIXME: handle MV_HP_ERRATA_50XXB2 errata */ - - tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL); - tmp |= ~(1 << 0); - writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL); -} - -static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int port) -{ - void __iomem *phy_mmio = mv5_phy_base(mmio, port); - const u32 mask = (1<<12) | (1<<11) | (1<<7) | (1<<6) | (1<<5); - u32 tmp; - int fix_apm_sq = (hpriv->hp_flags & MV_HP_ERRATA_50XXB0); - - if (fix_apm_sq) { - tmp = readl(phy_mmio + MV5_LT_MODE); - tmp |= (1 << 19); - writel(tmp, phy_mmio + MV5_LT_MODE); - - tmp = readl(phy_mmio + MV5_PHY_CTL); - tmp &= ~0x3; - tmp |= 0x1; - writel(tmp, phy_mmio + MV5_PHY_CTL); - } - - tmp = readl(phy_mmio + MV5_PHY_MODE); - tmp &= ~mask; - tmp |= hpriv->signal[port].pre; - tmp |= hpriv->signal[port].amps; - writel(tmp, phy_mmio + MV5_PHY_MODE); -} - - -#undef ZERO -#define ZERO(reg) writel(0, port_mmio + (reg)) -static void mv5_reset_hc_port(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int port) -{ - void __iomem *port_mmio = mv_port_base(mmio, port); - - writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); - - mv_channel_reset(hpriv, mmio, port); - - ZERO(0x028); /* command */ - writel(0x11f, port_mmio + EDMA_CFG_OFS); - ZERO(0x004); /* timer */ - ZERO(0x008); /* irq err cause */ - ZERO(0x00c); /* irq err mask */ - ZERO(0x010); /* rq bah */ - ZERO(0x014); /* rq inp */ - ZERO(0x018); /* rq outp */ - ZERO(0x01c); /* respq bah */ - ZERO(0x024); /* respq outp */ - ZERO(0x020); /* respq inp */ - ZERO(0x02c); /* test control */ - writel(0xbc, port_mmio + EDMA_IORDY_TMOUT); -} -#undef ZERO - -#define ZERO(reg) writel(0, hc_mmio + (reg)) -static void mv5_reset_one_hc(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int hc) -{ - void __iomem *hc_mmio = mv_hc_base(mmio, hc); - u32 tmp; - - ZERO(0x00c); - ZERO(0x010); - ZERO(0x014); - ZERO(0x018); - - tmp = readl(hc_mmio + 0x20); - tmp &= 0x1c1c1c1c; - tmp |= 0x03030303; - writel(tmp, hc_mmio + 0x20); -} -#undef ZERO - -static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int n_hc) -{ - unsigned int hc, port; - - for (hc = 0; hc < n_hc; hc++) { - for (port = 0; port < MV_PORTS_PER_HC; port++) - mv5_reset_hc_port(hpriv, mmio, - (hc * MV_PORTS_PER_HC) + port); - - mv5_reset_one_hc(hpriv, mmio, hc); - } - - return 0; -} - -#undef ZERO -#define ZERO(reg) writel(0, mmio + (reg)) -static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio) -{ - u32 tmp; - - tmp = readl(mmio + MV_PCI_MODE); - tmp &= 0xff00ffff; - writel(tmp, mmio + MV_PCI_MODE); - - ZERO(MV_PCI_DISC_TIMER); - ZERO(MV_PCI_MSI_TRIGGER); - writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT); - ZERO(HC_MAIN_IRQ_MASK_OFS); - ZERO(MV_PCI_SERR_MASK); - ZERO(PCI_IRQ_CAUSE_OFS); - ZERO(PCI_IRQ_MASK_OFS); - ZERO(MV_PCI_ERR_LOW_ADDRESS); - ZERO(MV_PCI_ERR_HIGH_ADDRESS); - ZERO(MV_PCI_ERR_ATTRIBUTE); - ZERO(MV_PCI_ERR_COMMAND); -} -#undef ZERO - -static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio) -{ - u32 tmp; - - mv5_reset_flash(hpriv, mmio); - - tmp = readl(mmio + MV_GPIO_PORT_CTL); - tmp &= 0x3; - tmp |= (1 << 5) | (1 << 6); - writel(tmp, mmio + MV_GPIO_PORT_CTL); -} - -/** - * mv6_reset_hc - Perform the 6xxx global soft reset - * @mmio: base address of the HBA - * - * This routine only applies to 6xxx parts. - * - * LOCKING: - * Inherited from caller. - */ -static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int n_hc) -{ - void __iomem *reg = mmio + PCI_MAIN_CMD_STS_OFS; - int i, rc = 0; - u32 t; - - /* Following procedure defined in PCI "main command and status - * register" table. - */ - t = readl(reg); - writel(t | STOP_PCI_MASTER, reg); - - for (i = 0; i < 1000; i++) { - udelay(1); - t = readl(reg); - if (PCI_MASTER_EMPTY & t) { - break; - } - } - if (!(PCI_MASTER_EMPTY & t)) { - printk(KERN_ERR DRV_NAME ": PCI master won't flush\n"); - rc = 1; - goto done; - } - - /* set reset */ - i = 5; - do { - writel(t | GLOB_SFT_RST, reg); - t = readl(reg); - udelay(1); - } while (!(GLOB_SFT_RST & t) && (i-- > 0)); - - if (!(GLOB_SFT_RST & t)) { - printk(KERN_ERR DRV_NAME ": can't set global reset\n"); - rc = 1; - goto done; - } - - /* clear reset and *reenable the PCI master* (not mentioned in spec) */ - i = 5; - do { - writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg); - t = readl(reg); - udelay(1); - } while ((GLOB_SFT_RST & t) && (i-- > 0)); - - if (GLOB_SFT_RST & t) { - printk(KERN_ERR DRV_NAME ": can't clear global reset\n"); - rc = 1; - } -done: - return rc; -} - -static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, - void __iomem *mmio) -{ - void __iomem *port_mmio; - u32 tmp; - - tmp = readl(mmio + MV_RESET_CFG); - if ((tmp & (1 << 0)) == 0) { - hpriv->signal[idx].amps = 0x7 << 8; - hpriv->signal[idx].pre = 0x1 << 5; - return; - } - - port_mmio = mv_port_base(mmio, idx); - tmp = readl(port_mmio + PHY_MODE2); - - hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */ - hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */ -} - -static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) -{ - writel(0x00000060, mmio + MV_GPIO_PORT_CTL); -} - -static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int port) -{ - void __iomem *port_mmio = mv_port_base(mmio, port); - - u32 hp_flags = hpriv->hp_flags; - int fix_phy_mode2 = - hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); - int fix_phy_mode4 = - hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); - u32 m2, tmp; - - if (fix_phy_mode2) { - m2 = readl(port_mmio + PHY_MODE2); - m2 &= ~(1 << 16); - m2 |= (1 << 31); - writel(m2, port_mmio + PHY_MODE2); - - udelay(200); - - m2 = readl(port_mmio + PHY_MODE2); - m2 &= ~((1 << 16) | (1 << 31)); - writel(m2, port_mmio + PHY_MODE2); - - udelay(200); - } - - /* who knows what this magic does */ - tmp = readl(port_mmio + PHY_MODE3); - tmp &= ~0x7F800000; - tmp |= 0x2A800000; - writel(tmp, port_mmio + PHY_MODE3); - - if (fix_phy_mode4) { - u32 m4; - - m4 = readl(port_mmio + PHY_MODE4); - - if (hp_flags & MV_HP_ERRATA_60X1B2) - tmp = readl(port_mmio + 0x310); - - m4 = (m4 & ~(1 << 1)) | (1 << 0); - - writel(m4, port_mmio + PHY_MODE4); - - if (hp_flags & MV_HP_ERRATA_60X1B2) - writel(tmp, port_mmio + 0x310); - } - - /* Revert values of pre-emphasis and signal amps to the saved ones */ - m2 = readl(port_mmio + PHY_MODE2); - - m2 &= ~MV_M2_PREAMP_MASK; - m2 |= hpriv->signal[port].amps; - m2 |= hpriv->signal[port].pre; - m2 &= ~(1 << 16); - - /* according to mvSata 3.6.1, some IIE values are fixed */ - if (IS_GEN_IIE(hpriv)) { - m2 &= ~0xC30FF01F; - m2 |= 0x0000900F; - } - - writel(m2, port_mmio + PHY_MODE2); -} - -static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio, - unsigned int port_no) -{ - void __iomem *port_mmio = mv_port_base(mmio, port_no); - - writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS); - - if (IS_60XX(hpriv)) { - u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL); - ifctl |= (1 << 7); /* enable gen2i speed */ - ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */ - writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL); - } - - udelay(25); /* allow reset propagation */ - - /* Spec never mentions clearing the bit. Marvell's driver does - * clear the bit, however. - */ - writelfl(0, port_mmio + EDMA_CMD_OFS); - - hpriv->ops->phy_errata(hpriv, mmio, port_no); - - if (IS_50XX(hpriv)) - mdelay(1); -} - -static void mv_stop_and_reset(struct ata_port *ap) -{ - struct mv_host_priv *hpriv = ap->host_set->private_data; - void __iomem *mmio = ap->host_set->mmio_base; - - mv_stop_dma(ap); - - mv_channel_reset(hpriv, mmio, ap->port_no); - - __mv_phy_reset(ap, 0); -} - -static inline void __msleep(unsigned int msec, int can_sleep) -{ - if (can_sleep) - msleep(msec); - else - mdelay(msec); -} - -/** - * __mv_phy_reset - Perform eDMA reset followed by COMRESET - * @ap: ATA channel to manipulate - * - * Part of this is taken from __sata_phy_reset and modified to - * not sleep since this routine gets called from interrupt level. - * - * LOCKING: - * Inherited from caller. This is coded to safe to call at - * interrupt level, i.e. it does not sleep. - */ -static void __mv_phy_reset(struct ata_port *ap, int can_sleep) -{ - struct mv_port_priv *pp = ap->private_data; - struct mv_host_priv *hpriv = ap->host_set->private_data; - void __iomem *port_mmio = mv_ap_base(ap); - struct ata_taskfile tf; - struct ata_device *dev = &ap->device[0]; - unsigned long timeout; - int retry = 5; - u32 sstatus; - - VPRINTK("ENTER, port %u, mmio 0x%p\n", ap->port_no, port_mmio); - - DPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x " - "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), - mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); - - /* Issue COMRESET via SControl */ -comreset_retry: - sata_scr_write_flush(ap, SCR_CONTROL, 0x301); - __msleep(1, can_sleep); - - sata_scr_write_flush(ap, SCR_CONTROL, 0x300); - __msleep(20, can_sleep); - - timeout = jiffies + msecs_to_jiffies(200); - do { - sata_scr_read(ap, SCR_STATUS, &sstatus); - sstatus &= 0x3; - if ((sstatus == 3) || (sstatus == 0)) - break; - - __msleep(1, can_sleep); - } while (time_before(jiffies, timeout)); - - /* work around errata */ - if (IS_60XX(hpriv) && - (sstatus != 0x0) && (sstatus != 0x113) && (sstatus != 0x123) && - (retry-- > 0)) - goto comreset_retry; - - DPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x " - "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), - mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); - - if (ata_port_online(ap)) { - ata_port_probe(ap); - } else { - sata_scr_read(ap, SCR_STATUS, &sstatus); - ata_port_printk(ap, KERN_INFO, - "no device found (phy stat %08x)\n", sstatus); - ata_port_disable(ap); - return; - } - ap->cbl = ATA_CBL_SATA; - - /* even after SStatus reflects that device is ready, - * it seems to take a while for link to be fully - * established (and thus Status no longer 0x80/0x7F), - * so we poll a bit for that, here. - */ - retry = 20; - while (1) { - u8 drv_stat = ata_check_status(ap); - if ((drv_stat != 0x80) && (drv_stat != 0x7f)) - break; - __msleep(500, can_sleep); - if (retry-- <= 0) - break; - } - - tf.lbah = readb((void __iomem *) ap->ioaddr.lbah_addr); - tf.lbam = readb((void __iomem *) ap->ioaddr.lbam_addr); - tf.lbal = readb((void __iomem *) ap->ioaddr.lbal_addr); - tf.nsect = readb((void __iomem *) ap->ioaddr.nsect_addr); - - dev->class = ata_dev_classify(&tf); - if (!ata_dev_enabled(dev)) { - VPRINTK("Port disabled post-sig: No device present.\n"); - ata_port_disable(ap); - } - - writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); - - pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; - - VPRINTK("EXIT\n"); -} - -static void mv_phy_reset(struct ata_port *ap) -{ - __mv_phy_reset(ap, 1); -} - -/** - * mv_eng_timeout - Routine called by libata when SCSI times out I/O - * @ap: ATA channel to manipulate - * - * Intent is to clear all pending error conditions, reset the - * chip/bus, fail the command, and move on. - * - * LOCKING: - * This routine holds the host_set lock while failing the command. - */ -static void mv_eng_timeout(struct ata_port *ap) -{ - struct ata_queued_cmd *qc; - unsigned long flags; - - ata_port_printk(ap, KERN_ERR, "Entering mv_eng_timeout\n"); - DPRINTK("All regs @ start of eng_timeout\n"); - mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no, - to_pci_dev(ap->host_set->dev)); - - qc = ata_qc_from_tag(ap, ap->active_tag); - printk(KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n", - ap->host_set->mmio_base, ap, qc, qc->scsicmd, - &qc->scsicmd->cmnd); - - spin_lock_irqsave(&ap->host_set->lock, flags); - mv_err_intr(ap, 0); - mv_stop_and_reset(ap); - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); - if (qc->flags & ATA_QCFLAG_ACTIVE) { - qc->err_mask |= AC_ERR_TIMEOUT; - ata_eh_qc_complete(qc); - } -} - -/** - * mv_port_init - Perform some early initialization on a single port. - * @port: libata data structure storing shadow register addresses - * @port_mmio: base address of the port - * - * Initialize shadow register mmio addresses, clear outstanding - * interrupts on the port, and unmask interrupts for the future - * start of the port. - * - * LOCKING: - * Inherited from caller. - */ -static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) -{ - unsigned long shd_base = (unsigned long) port_mmio + SHD_BLK_OFS; - unsigned serr_ofs; - - /* PIO related setup - */ - port->data_addr = shd_base + (sizeof(u32) * ATA_REG_DATA); - port->error_addr = - port->feature_addr = shd_base + (sizeof(u32) * ATA_REG_ERR); - port->nsect_addr = shd_base + (sizeof(u32) * ATA_REG_NSECT); - port->lbal_addr = shd_base + (sizeof(u32) * ATA_REG_LBAL); - port->lbam_addr = shd_base + (sizeof(u32) * ATA_REG_LBAM); - port->lbah_addr = shd_base + (sizeof(u32) * ATA_REG_LBAH); - port->device_addr = shd_base + (sizeof(u32) * ATA_REG_DEVICE); - port->status_addr = - port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS); - /* special case: control/altstatus doesn't have ATA_REG_ address */ - port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS; - - /* unused: */ - port->cmd_addr = port->bmdma_addr = port->scr_addr = 0; - - /* Clear any currently outstanding port interrupt conditions */ - serr_ofs = mv_scr_offset(SCR_ERROR); - writelfl(readl(port_mmio + serr_ofs), port_mmio + serr_ofs); - writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); - - /* unmask all EDMA error interrupts */ - writelfl(~0, port_mmio + EDMA_ERR_IRQ_MASK_OFS); - - VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n", - readl(port_mmio + EDMA_CFG_OFS), - readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS), - readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS)); -} - -static int mv_chip_id(struct pci_dev *pdev, struct mv_host_priv *hpriv, - unsigned int board_idx) -{ - u8 rev_id; - u32 hp_flags = hpriv->hp_flags; - - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); - - switch(board_idx) { - case chip_5080: - hpriv->ops = &mv5xxx_ops; - hp_flags |= MV_HP_50XX; - - switch (rev_id) { - case 0x1: - hp_flags |= MV_HP_ERRATA_50XXB0; - break; - case 0x3: - hp_flags |= MV_HP_ERRATA_50XXB2; - break; - default: - dev_printk(KERN_WARNING, &pdev->dev, - "Applying 50XXB2 workarounds to unknown rev\n"); - hp_flags |= MV_HP_ERRATA_50XXB2; - break; - } - break; - - case chip_504x: - case chip_508x: - hpriv->ops = &mv5xxx_ops; - hp_flags |= MV_HP_50XX; - - switch (rev_id) { - case 0x0: - hp_flags |= MV_HP_ERRATA_50XXB0; - break; - case 0x3: - hp_flags |= MV_HP_ERRATA_50XXB2; - break; - default: - dev_printk(KERN_WARNING, &pdev->dev, - "Applying B2 workarounds to unknown rev\n"); - hp_flags |= MV_HP_ERRATA_50XXB2; - break; - } - break; - - case chip_604x: - case chip_608x: - hpriv->ops = &mv6xxx_ops; - - switch (rev_id) { - case 0x7: - hp_flags |= MV_HP_ERRATA_60X1B2; - break; - case 0x9: - hp_flags |= MV_HP_ERRATA_60X1C0; - break; - default: - dev_printk(KERN_WARNING, &pdev->dev, - "Applying B2 workarounds to unknown rev\n"); - hp_flags |= MV_HP_ERRATA_60X1B2; - break; - } - break; - - case chip_7042: - case chip_6042: - hpriv->ops = &mv6xxx_ops; - - hp_flags |= MV_HP_GEN_IIE; - - switch (rev_id) { - case 0x0: - hp_flags |= MV_HP_ERRATA_XX42A0; - break; - case 0x1: - hp_flags |= MV_HP_ERRATA_60X1C0; - break; - default: - dev_printk(KERN_WARNING, &pdev->dev, - "Applying 60X1C0 workarounds to unknown rev\n"); - hp_flags |= MV_HP_ERRATA_60X1C0; - break; - } - break; - - default: - printk(KERN_ERR DRV_NAME ": BUG: invalid board index %u\n", board_idx); - return 1; - } - - hpriv->hp_flags = hp_flags; - - return 0; -} - -/** - * mv_init_host - Perform some early initialization of the host. - * @pdev: host PCI device - * @probe_ent: early data struct representing the host - * - * If possible, do an early global reset of the host. Then do - * our port init and clear/unmask all/relevant host interrupts. - * - * LOCKING: - * Inherited from caller. - */ -static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent, - unsigned int board_idx) -{ - int rc = 0, n_hc, port, hc; - void __iomem *mmio = probe_ent->mmio_base; - struct mv_host_priv *hpriv = probe_ent->private_data; - - /* global interrupt mask */ - writel(0, mmio + HC_MAIN_IRQ_MASK_OFS); - - rc = mv_chip_id(pdev, hpriv, board_idx); - if (rc) - goto done; - - n_hc = mv_get_hc_count(probe_ent->host_flags); - probe_ent->n_ports = MV_PORTS_PER_HC * n_hc; - - for (port = 0; port < probe_ent->n_ports; port++) - hpriv->ops->read_preamp(hpriv, port, mmio); - - rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc); - if (rc) - goto done; - - hpriv->ops->reset_flash(hpriv, mmio); - hpriv->ops->reset_bus(pdev, mmio); - hpriv->ops->enable_leds(hpriv, mmio); - - for (port = 0; port < probe_ent->n_ports; port++) { - if (IS_60XX(hpriv)) { - void __iomem *port_mmio = mv_port_base(mmio, port); - - u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL); - ifctl |= (1 << 7); /* enable gen2i speed */ - ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */ - writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL); - } - - hpriv->ops->phy_errata(hpriv, mmio, port); - } - - for (port = 0; port < probe_ent->n_ports; port++) { - void __iomem *port_mmio = mv_port_base(mmio, port); - mv_port_init(&probe_ent->port[port], port_mmio); - } - - for (hc = 0; hc < n_hc; hc++) { - void __iomem *hc_mmio = mv_hc_base(mmio, hc); - - VPRINTK("HC%i: HC config=0x%08x HC IRQ cause " - "(before clear)=0x%08x\n", hc, - readl(hc_mmio + HC_CFG_OFS), - readl(hc_mmio + HC_IRQ_CAUSE_OFS)); - - /* Clear any currently outstanding hc interrupt conditions */ - writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); - } - - /* Clear any currently outstanding host interrupt conditions */ - writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); - - /* and unmask interrupt generation for host regs */ - writelfl(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS); - writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS); - - VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x " - "PCI int cause/mask=0x%08x/0x%08x\n", - readl(mmio + HC_MAIN_IRQ_CAUSE_OFS), - readl(mmio + HC_MAIN_IRQ_MASK_OFS), - readl(mmio + PCI_IRQ_CAUSE_OFS), - readl(mmio + PCI_IRQ_MASK_OFS)); - -done: - return rc; -} - -/** - * mv_print_info - Dump key info to kernel log for perusal. - * @probe_ent: early data struct representing the host - * - * FIXME: complete this. - * - * LOCKING: - * Inherited from caller. - */ -static void mv_print_info(struct ata_probe_ent *probe_ent) -{ - struct pci_dev *pdev = to_pci_dev(probe_ent->dev); - struct mv_host_priv *hpriv = probe_ent->private_data; - u8 rev_id, scc; - const char *scc_s; - - /* Use this to determine the HW stepping of the chip so we know - * what errata to workaround - */ - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); - - pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc); - if (scc == 0) - scc_s = "SCSI"; - else if (scc == 0x01) - scc_s = "RAID"; - else - scc_s = "unknown"; - - dev_printk(KERN_INFO, &pdev->dev, - "%u slots %u ports %s mode IRQ via %s\n", - (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports, - scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx"); -} - -/** - * mv_init_one - handle a positive probe of a Marvell host - * @pdev: PCI device found - * @ent: PCI device ID entry for the matched host - * - * LOCKING: - * Inherited from caller. - */ -static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version = 0; - struct ata_probe_ent *probe_ent = NULL; - struct mv_host_priv *hpriv; - unsigned int board_idx = (unsigned int)ent->driver_data; - void __iomem *mmio_base; - int pci_dev_busy = 0, rc; - - if (!printed_version++) - dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) { - return rc; - } - pci_set_master(pdev); - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out; - } - - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) { - rc = -ENOMEM; - goto err_out_regions; - } - - memset(probe_ent, 0, sizeof(*probe_ent)); - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - mmio_base = pci_iomap(pdev, MV_PRIMARY_BAR, 0); - if (mmio_base == NULL) { - rc = -ENOMEM; - goto err_out_free_ent; - } - - hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL); - if (!hpriv) { - rc = -ENOMEM; - goto err_out_iounmap; - } - memset(hpriv, 0, sizeof(*hpriv)); - - probe_ent->sht = mv_port_info[board_idx].sht; - probe_ent->host_flags = mv_port_info[board_idx].host_flags; - probe_ent->pio_mask = mv_port_info[board_idx].pio_mask; - probe_ent->udma_mask = mv_port_info[board_idx].udma_mask; - probe_ent->port_ops = mv_port_info[board_idx].port_ops; - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = SA_SHIRQ; - probe_ent->mmio_base = mmio_base; - probe_ent->private_data = hpriv; - - /* initialize adapter */ - rc = mv_init_host(pdev, probe_ent, board_idx); - if (rc) { - goto err_out_hpriv; - } - - /* Enable interrupts */ - if (msi && pci_enable_msi(pdev) == 0) { - hpriv->hp_flags |= MV_HP_FLAG_MSI; - } else { - pci_intx(pdev, 1); - } - - mv_dump_pci_cfg(pdev, 0x68); - mv_print_info(probe_ent); - - if (ata_device_add(probe_ent) == 0) { - rc = -ENODEV; /* No devices discovered */ - goto err_out_dev_add; - } - - kfree(probe_ent); - return 0; - -err_out_dev_add: - if (MV_HP_FLAG_MSI & hpriv->hp_flags) { - pci_disable_msi(pdev); - } else { - pci_intx(pdev, 0); - } -err_out_hpriv: - kfree(hpriv); -err_out_iounmap: - pci_iounmap(pdev, mmio_base); -err_out_free_ent: - kfree(probe_ent); -err_out_regions: - pci_release_regions(pdev); -err_out: - if (!pci_dev_busy) { - pci_disable_device(pdev); - } - - return rc; -} - -static int __init mv_init(void) -{ - return pci_module_init(&mv_pci_driver); -} - -static void __exit mv_exit(void) -{ - pci_unregister_driver(&mv_pci_driver); -} - -MODULE_AUTHOR("Brett Russ"); -MODULE_DESCRIPTION("SCSI low-level driver for Marvell SATA controllers"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, mv_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -module_param(msi, int, 0444); -MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)"); - -module_init(mv_init); -module_exit(mv_exit); diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c deleted file mode 100644 index d18e7e0932e..00000000000 --- a/drivers/scsi/sata_nv.c +++ /dev/null @@ -1,596 +0,0 @@ -/* - * sata_nv.c - NVIDIA nForce SATA - * - * Copyright 2004 NVIDIA Corp. All rights reserved. - * Copyright 2004 Andrew Chew - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * No hardware documentation available outside of NVIDIA. - * This driver programs the NVIDIA SATA controller in a similar - * fashion as with other PCI IDE BMDMA controllers, with a few - * NV-specific details such as register offsets, SATA phy location, - * hotplug info, etc. - * - */ - -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/blkdev.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <scsi/scsi_host.h> -#include <linux/libata.h> - -#define DRV_NAME "sata_nv" -#define DRV_VERSION "0.9" - -enum { - NV_PORTS = 2, - NV_PIO_MASK = 0x1f, - NV_MWDMA_MASK = 0x07, - NV_UDMA_MASK = 0x7f, - NV_PORT0_SCR_REG_OFFSET = 0x00, - NV_PORT1_SCR_REG_OFFSET = 0x40, - - /* INT_STATUS/ENABLE */ - NV_INT_STATUS = 0x10, - NV_INT_ENABLE = 0x11, - NV_INT_STATUS_CK804 = 0x440, - NV_INT_ENABLE_CK804 = 0x441, - - /* INT_STATUS/ENABLE bits */ - NV_INT_DEV = 0x01, - NV_INT_PM = 0x02, - NV_INT_ADDED = 0x04, - NV_INT_REMOVED = 0x08, - - NV_INT_PORT_SHIFT = 4, /* each port occupies 4 bits */ - - NV_INT_ALL = 0x0f, - NV_INT_MASK = NV_INT_DEV | - NV_INT_ADDED | NV_INT_REMOVED, - - /* INT_CONFIG */ - NV_INT_CONFIG = 0x12, - NV_INT_CONFIG_METHD = 0x01, // 0 = INT, 1 = SMI - - // For PCI config register 20 - NV_MCP_SATA_CFG_20 = 0x50, - NV_MCP_SATA_CFG_20_SATA_SPACE_EN = 0x04, -}; - -static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static void nv_ck804_host_stop(struct ata_host_set *host_set); -static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance, - struct pt_regs *regs); -static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance, - struct pt_regs *regs); -static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance, - struct pt_regs *regs); -static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg); -static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); - -static void nv_nf2_freeze(struct ata_port *ap); -static void nv_nf2_thaw(struct ata_port *ap); -static void nv_ck804_freeze(struct ata_port *ap); -static void nv_ck804_thaw(struct ata_port *ap); -static void nv_error_handler(struct ata_port *ap); - -enum nv_host_type -{ - GENERIC, - NFORCE2, - NFORCE3 = NFORCE2, /* NF2 == NF3 as far as sata_nv is concerned */ - CK804 -}; - -static const struct pci_device_id nv_pci_tbl[] = { - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE2 }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE3 }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE3 }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, 0x045c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, 0x045d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, 0x045e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, 0x045f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, - PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, - PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_STORAGE_RAID<<8, 0xffff00, GENERIC }, - { 0, } /* terminate list */ -}; - -static struct pci_driver nv_pci_driver = { - .name = DRV_NAME, - .id_table = nv_pci_tbl, - .probe = nv_init_one, - .remove = ata_pci_remove_one, -}; - -static struct scsi_host_template nv_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - -static const struct ata_port_operations nv_generic_ops = { - .port_disable = ata_port_disable, - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .exec_command = ata_exec_command, - .check_status = ata_check_status, - .dev_select = ata_std_dev_select, - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = nv_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .data_xfer = ata_pio_data_xfer, - .irq_handler = nv_generic_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .scr_read = nv_scr_read, - .scr_write = nv_scr_write, - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_pci_host_stop, -}; - -static const struct ata_port_operations nv_nf2_ops = { - .port_disable = ata_port_disable, - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .exec_command = ata_exec_command, - .check_status = ata_check_status, - .dev_select = ata_std_dev_select, - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .freeze = nv_nf2_freeze, - .thaw = nv_nf2_thaw, - .error_handler = nv_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .data_xfer = ata_pio_data_xfer, - .irq_handler = nv_nf2_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .scr_read = nv_scr_read, - .scr_write = nv_scr_write, - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_pci_host_stop, -}; - -static const struct ata_port_operations nv_ck804_ops = { - .port_disable = ata_port_disable, - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .exec_command = ata_exec_command, - .check_status = ata_check_status, - .dev_select = ata_std_dev_select, - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .freeze = nv_ck804_freeze, - .thaw = nv_ck804_thaw, - .error_handler = nv_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .data_xfer = ata_pio_data_xfer, - .irq_handler = nv_ck804_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .scr_read = nv_scr_read, - .scr_write = nv_scr_write, - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = nv_ck804_host_stop, -}; - -static struct ata_port_info nv_port_info[] = { - /* generic */ - { - .sht = &nv_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, - .pio_mask = NV_PIO_MASK, - .mwdma_mask = NV_MWDMA_MASK, - .udma_mask = NV_UDMA_MASK, - .port_ops = &nv_generic_ops, - }, - /* nforce2/3 */ - { - .sht = &nv_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, - .pio_mask = NV_PIO_MASK, - .mwdma_mask = NV_MWDMA_MASK, - .udma_mask = NV_UDMA_MASK, - .port_ops = &nv_nf2_ops, - }, - /* ck804 */ - { - .sht = &nv_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, - .pio_mask = NV_PIO_MASK, - .mwdma_mask = NV_MWDMA_MASK, - .udma_mask = NV_UDMA_MASK, - .port_ops = &nv_ck804_ops, - }, -}; - -MODULE_AUTHOR("NVIDIA"); -MODULE_DESCRIPTION("low-level driver for NVIDIA nForce SATA controller"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, nv_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance, - struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - unsigned int i; - unsigned int handled = 0; - unsigned long flags; - - spin_lock_irqsave(&host_set->lock, flags); - - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap; - - ap = host_set->ports[i]; - if (ap && - !(ap->flags & ATA_FLAG_DISABLED)) { - struct ata_queued_cmd *qc; - - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) - handled += ata_host_intr(ap, qc); - else - // No request pending? Clear interrupt status - // anyway, in case there's one pending. - ap->ops->check_status(ap); - } - - } - - spin_unlock_irqrestore(&host_set->lock, flags); - - return IRQ_RETVAL(handled); -} - -static int nv_host_intr(struct ata_port *ap, u8 irq_stat) -{ - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); - int handled; - - /* freeze if hotplugged */ - if (unlikely(irq_stat & (NV_INT_ADDED | NV_INT_REMOVED))) { - ata_port_freeze(ap); - return 1; - } - - /* bail out if not our interrupt */ - if (!(irq_stat & NV_INT_DEV)) - return 0; - - /* DEV interrupt w/ no active qc? */ - if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) { - ata_check_status(ap); - return 1; - } - - /* handle interrupt */ - handled = ata_host_intr(ap, qc); - if (unlikely(!handled)) { - /* spurious, clear it */ - ata_check_status(ap); - } - - return 1; -} - -static irqreturn_t nv_do_interrupt(struct ata_host_set *host_set, u8 irq_stat) -{ - int i, handled = 0; - - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; - - if (ap && !(ap->flags & ATA_FLAG_DISABLED)) - handled += nv_host_intr(ap, irq_stat); - - irq_stat >>= NV_INT_PORT_SHIFT; - } - - return IRQ_RETVAL(handled); -} - -static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance, - struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - u8 irq_stat; - irqreturn_t ret; - - spin_lock(&host_set->lock); - irq_stat = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS); - ret = nv_do_interrupt(host_set, irq_stat); - spin_unlock(&host_set->lock); - - return ret; -} - -static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance, - struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - u8 irq_stat; - irqreturn_t ret; - - spin_lock(&host_set->lock); - irq_stat = readb(host_set->mmio_base + NV_INT_STATUS_CK804); - ret = nv_do_interrupt(host_set, irq_stat); - spin_unlock(&host_set->lock); - - return ret; -} - -static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg) -{ - if (sc_reg > SCR_CONTROL) - return 0xffffffffU; - - return ioread32((void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4)); -} - -static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) -{ - if (sc_reg > SCR_CONTROL) - return; - - iowrite32(val, (void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4)); -} - -static void nv_nf2_freeze(struct ata_port *ap) -{ - unsigned long scr_addr = ap->host_set->ports[0]->ioaddr.scr_addr; - int shift = ap->port_no * NV_INT_PORT_SHIFT; - u8 mask; - - mask = inb(scr_addr + NV_INT_ENABLE); - mask &= ~(NV_INT_ALL << shift); - outb(mask, scr_addr + NV_INT_ENABLE); -} - -static void nv_nf2_thaw(struct ata_port *ap) -{ - unsigned long scr_addr = ap->host_set->ports[0]->ioaddr.scr_addr; - int shift = ap->port_no * NV_INT_PORT_SHIFT; - u8 mask; - - outb(NV_INT_ALL << shift, scr_addr + NV_INT_STATUS); - - mask = inb(scr_addr + NV_INT_ENABLE); - mask |= (NV_INT_MASK << shift); - outb(mask, scr_addr + NV_INT_ENABLE); -} - -static void nv_ck804_freeze(struct ata_port *ap) -{ - void __iomem *mmio_base = ap->host_set->mmio_base; - int shift = ap->port_no * NV_INT_PORT_SHIFT; - u8 mask; - - mask = readb(mmio_base + NV_INT_ENABLE_CK804); - mask &= ~(NV_INT_ALL << shift); - writeb(mask, mmio_base + NV_INT_ENABLE_CK804); -} - -static void nv_ck804_thaw(struct ata_port *ap) -{ - void __iomem *mmio_base = ap->host_set->mmio_base; - int shift = ap->port_no * NV_INT_PORT_SHIFT; - u8 mask; - - writeb(NV_INT_ALL << shift, mmio_base + NV_INT_STATUS_CK804); - - mask = readb(mmio_base + NV_INT_ENABLE_CK804); - mask |= (NV_INT_MASK << shift); - writeb(mask, mmio_base + NV_INT_ENABLE_CK804); -} - -static int nv_hardreset(struct ata_port *ap, unsigned int *class) -{ - unsigned int dummy; - - /* SATA hardreset fails to retrieve proper device signature on - * some controllers. Don't classify on hardreset. For more - * info, see http://bugme.osdl.org/show_bug.cgi?id=3352 - */ - return sata_std_hardreset(ap, &dummy); -} - -static void nv_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, - nv_hardreset, ata_std_postreset); -} - -static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version = 0; - struct ata_port_info *ppi; - struct ata_probe_ent *probe_ent; - int pci_dev_busy = 0; - int rc; - u32 bar; - unsigned long base; - - // Make sure this is a SATA controller by counting the number of bars - // (NVIDIA SATA controllers will always have six bars). Otherwise, - // it's an IDE controller and we ignore it. - for (bar=0; bar<6; bar++) - if (pci_resource_start(pdev, bar) == 0) - return -ENODEV; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - goto err_out; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out_disable; - } - - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - rc = -ENOMEM; - - ppi = &nv_port_info[ent->driver_data]; - probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); - if (!probe_ent) - goto err_out_regions; - - probe_ent->mmio_base = pci_iomap(pdev, 5, 0); - if (!probe_ent->mmio_base) { - rc = -EIO; - goto err_out_free_ent; - } - - base = (unsigned long)probe_ent->mmio_base; - - probe_ent->port[0].scr_addr = base + NV_PORT0_SCR_REG_OFFSET; - probe_ent->port[1].scr_addr = base + NV_PORT1_SCR_REG_OFFSET; - - /* enable SATA space for CK804 */ - if (ent->driver_data == CK804) { - u8 regval; - - pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val); - regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN; - pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval); - } - - pci_set_master(pdev); - - rc = ata_device_add(probe_ent); - if (rc != NV_PORTS) - goto err_out_iounmap; - - kfree(probe_ent); - - return 0; - -err_out_iounmap: - pci_iounmap(pdev, probe_ent->mmio_base); -err_out_free_ent: - kfree(probe_ent); -err_out_regions: - pci_release_regions(pdev); -err_out_disable: - if (!pci_dev_busy) - pci_disable_device(pdev); -err_out: - return rc; -} - -static void nv_ck804_host_stop(struct ata_host_set *host_set) -{ - struct pci_dev *pdev = to_pci_dev(host_set->dev); - u8 regval; - - /* disable SATA space for CK804 */ - pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val); - regval &= ~NV_MCP_SATA_CFG_20_SATA_SPACE_EN; - pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval); - - ata_pci_host_stop(host_set); -} - -static int __init nv_init(void) -{ - return pci_module_init(&nv_pci_driver); -} - -static void __exit nv_exit(void) -{ - pci_unregister_driver(&nv_pci_driver); -} - -module_init(nv_init); -module_exit(nv_exit); diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c deleted file mode 100644 index b2b6ed5216e..00000000000 --- a/drivers/scsi/sata_promise.c +++ /dev/null @@ -1,837 +0,0 @@ -/* - * sata_promise.c - Promise SATA - * - * Maintained by: Jeff Garzik <jgarzik@pobox.com> - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2003-2004 Red Hat, Inc. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware information only available under NDA. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/blkdev.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/sched.h> -#include <linux/device.h> -#include <scsi/scsi_host.h> -#include <scsi/scsi_cmnd.h> -#include <linux/libata.h> -#include <asm/io.h> -#include "sata_promise.h" - -#define DRV_NAME "sata_promise" -#define DRV_VERSION "1.04" - - -enum { - PDC_PKT_SUBMIT = 0x40, /* Command packet pointer addr */ - PDC_INT_SEQMASK = 0x40, /* Mask of asserted SEQ INTs */ - PDC_TBG_MODE = 0x41, /* TBG mode */ - PDC_FLASH_CTL = 0x44, /* Flash control register */ - PDC_PCI_CTL = 0x48, /* PCI control and status register */ - PDC_GLOBAL_CTL = 0x48, /* Global control/status (per port) */ - PDC_CTLSTAT = 0x60, /* IDE control and status (per port) */ - PDC_SATA_PLUG_CSR = 0x6C, /* SATA Plug control/status reg */ - PDC2_SATA_PLUG_CSR = 0x60, /* SATAII Plug control/status reg */ - PDC_SLEW_CTL = 0x470, /* slew rate control reg */ - - PDC_ERR_MASK = (1<<19) | (1<<20) | (1<<21) | (1<<22) | - (1<<8) | (1<<9) | (1<<10), - - board_2037x = 0, /* FastTrak S150 TX2plus */ - board_20319 = 1, /* FastTrak S150 TX4 */ - board_20619 = 2, /* FastTrak TX4000 */ - board_20771 = 3, /* FastTrak TX2300 */ - board_2057x = 4, /* SATAII150 Tx2plus */ - board_40518 = 5, /* SATAII150 Tx4 */ - - PDC_HAS_PATA = (1 << 1), /* PDC20375/20575 has PATA */ - - PDC_RESET = (1 << 11), /* HDMA reset */ - - PDC_COMMON_FLAGS = ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST | - ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI | - ATA_FLAG_PIO_POLLING, -}; - - -struct pdc_port_priv { - u8 *pkt; - dma_addr_t pkt_dma; -}; - -struct pdc_host_priv { - int hotplug_offset; -}; - -static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg); -static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); -static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *regs); -static void pdc_eng_timeout(struct ata_port *ap); -static int pdc_port_start(struct ata_port *ap); -static void pdc_port_stop(struct ata_port *ap); -static void pdc_pata_phy_reset(struct ata_port *ap); -static void pdc_sata_phy_reset(struct ata_port *ap); -static void pdc_qc_prep(struct ata_queued_cmd *qc); -static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); -static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); -static void pdc_irq_clear(struct ata_port *ap); -static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc); -static void pdc_host_stop(struct ata_host_set *host_set); - - -static struct scsi_host_template pdc_ata_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - -static const struct ata_port_operations pdc_sata_ops = { - .port_disable = ata_port_disable, - .tf_load = pdc_tf_load_mmio, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = pdc_exec_command_mmio, - .dev_select = ata_std_dev_select, - - .phy_reset = pdc_sata_phy_reset, - - .qc_prep = pdc_qc_prep, - .qc_issue = pdc_qc_issue_prot, - .eng_timeout = pdc_eng_timeout, - .data_xfer = ata_mmio_data_xfer, - .irq_handler = pdc_interrupt, - .irq_clear = pdc_irq_clear, - - .scr_read = pdc_sata_scr_read, - .scr_write = pdc_sata_scr_write, - .port_start = pdc_port_start, - .port_stop = pdc_port_stop, - .host_stop = pdc_host_stop, -}; - -static const struct ata_port_operations pdc_pata_ops = { - .port_disable = ata_port_disable, - .tf_load = pdc_tf_load_mmio, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = pdc_exec_command_mmio, - .dev_select = ata_std_dev_select, - - .phy_reset = pdc_pata_phy_reset, - - .qc_prep = pdc_qc_prep, - .qc_issue = pdc_qc_issue_prot, - .data_xfer = ata_mmio_data_xfer, - .eng_timeout = pdc_eng_timeout, - .irq_handler = pdc_interrupt, - .irq_clear = pdc_irq_clear, - - .port_start = pdc_port_start, - .port_stop = pdc_port_stop, - .host_stop = pdc_host_stop, -}; - -static const struct ata_port_info pdc_port_info[] = { - /* board_2037x */ - { - .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &pdc_sata_ops, - }, - - /* board_20319 */ - { - .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &pdc_sata_ops, - }, - - /* board_20619 */ - { - .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &pdc_pata_ops, - }, - - /* board_20771 */ - { - .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &pdc_sata_ops, - }, - - /* board_2057x */ - { - .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &pdc_sata_ops, - }, - - /* board_40518 */ - { - .sht = &pdc_ata_sht, - .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &pdc_sata_ops, - }, -}; - -static const struct pci_device_id pdc_ata_pci_tbl[] = { - { PCI_VENDOR_ID_PROMISE, 0x3371, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2037x }, - { PCI_VENDOR_ID_PROMISE, 0x3570, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2037x }, - { PCI_VENDOR_ID_PROMISE, 0x3571, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2037x }, - { PCI_VENDOR_ID_PROMISE, 0x3373, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2037x }, - { PCI_VENDOR_ID_PROMISE, 0x3375, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2037x }, - { PCI_VENDOR_ID_PROMISE, 0x3376, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2037x }, - { PCI_VENDOR_ID_PROMISE, 0x3574, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2057x }, - { PCI_VENDOR_ID_PROMISE, 0x3d75, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2057x }, - { PCI_VENDOR_ID_PROMISE, 0x3d73, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2037x }, - - { PCI_VENDOR_ID_PROMISE, 0x3318, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_20319 }, - { PCI_VENDOR_ID_PROMISE, 0x3319, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_20319 }, - { PCI_VENDOR_ID_PROMISE, 0x3515, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_20319 }, - { PCI_VENDOR_ID_PROMISE, 0x3519, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_20319 }, - { PCI_VENDOR_ID_PROMISE, 0x3d17, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_20319 }, - { PCI_VENDOR_ID_PROMISE, 0x3d18, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_40518 }, - - { PCI_VENDOR_ID_PROMISE, 0x6629, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_20619 }, - - { PCI_VENDOR_ID_PROMISE, 0x3570, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_20771 }, - { } /* terminate list */ -}; - - -static struct pci_driver pdc_ata_pci_driver = { - .name = DRV_NAME, - .id_table = pdc_ata_pci_tbl, - .probe = pdc_ata_init_one, - .remove = ata_pci_remove_one, -}; - - -static int pdc_port_start(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct pdc_port_priv *pp; - int rc; - - rc = ata_port_start(ap); - if (rc) - return rc; - - pp = kzalloc(sizeof(*pp), GFP_KERNEL); - if (!pp) { - rc = -ENOMEM; - goto err_out; - } - - pp->pkt = dma_alloc_coherent(dev, 128, &pp->pkt_dma, GFP_KERNEL); - if (!pp->pkt) { - rc = -ENOMEM; - goto err_out_kfree; - } - - ap->private_data = pp; - - return 0; - -err_out_kfree: - kfree(pp); -err_out: - ata_port_stop(ap); - return rc; -} - - -static void pdc_port_stop(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct pdc_port_priv *pp = ap->private_data; - - ap->private_data = NULL; - dma_free_coherent(dev, 128, pp->pkt, pp->pkt_dma); - kfree(pp); - ata_port_stop(ap); -} - - -static void pdc_host_stop(struct ata_host_set *host_set) -{ - struct pdc_host_priv *hp = host_set->private_data; - - ata_pci_host_stop(host_set); - - kfree(hp); -} - - -static void pdc_reset_port(struct ata_port *ap) -{ - void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_CTLSTAT; - unsigned int i; - u32 tmp; - - for (i = 11; i > 0; i--) { - tmp = readl(mmio); - if (tmp & PDC_RESET) - break; - - udelay(100); - - tmp |= PDC_RESET; - writel(tmp, mmio); - } - - tmp &= ~PDC_RESET; - writel(tmp, mmio); - readl(mmio); /* flush */ -} - -static void pdc_sata_phy_reset(struct ata_port *ap) -{ - pdc_reset_port(ap); - sata_phy_reset(ap); -} - -static void pdc_pata_cbl_detect(struct ata_port *ap) -{ - u8 tmp; - void __iomem *mmio = (void *) ap->ioaddr.cmd_addr + PDC_CTLSTAT + 0x03; - - tmp = readb(mmio); - - if (tmp & 0x01) { - ap->cbl = ATA_CBL_PATA40; - ap->udma_mask &= ATA_UDMA_MASK_40C; - } else - ap->cbl = ATA_CBL_PATA80; -} - -static void pdc_pata_phy_reset(struct ata_port *ap) -{ - pdc_pata_cbl_detect(ap); - pdc_reset_port(ap); - ata_port_probe(ap); - ata_bus_reset(ap); -} - -static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) -{ - if (sc_reg > SCR_CONTROL) - return 0xffffffffU; - return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); -} - - -static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, - u32 val) -{ - if (sc_reg > SCR_CONTROL) - return; - writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); -} - -static void pdc_qc_prep(struct ata_queued_cmd *qc) -{ - struct pdc_port_priv *pp = qc->ap->private_data; - unsigned int i; - - VPRINTK("ENTER\n"); - - switch (qc->tf.protocol) { - case ATA_PROT_DMA: - ata_qc_prep(qc); - /* fall through */ - - case ATA_PROT_NODATA: - i = pdc_pkt_header(&qc->tf, qc->ap->prd_dma, - qc->dev->devno, pp->pkt); - - if (qc->tf.flags & ATA_TFLAG_LBA48) - i = pdc_prep_lba48(&qc->tf, pp->pkt, i); - else - i = pdc_prep_lba28(&qc->tf, pp->pkt, i); - - pdc_pkt_footer(&qc->tf, pp->pkt, i); - break; - - default: - break; - } -} - -static void pdc_eng_timeout(struct ata_port *ap) -{ - struct ata_host_set *host_set = ap->host_set; - u8 drv_stat; - struct ata_queued_cmd *qc; - unsigned long flags; - - DPRINTK("ENTER\n"); - - spin_lock_irqsave(&host_set->lock, flags); - - qc = ata_qc_from_tag(ap, ap->active_tag); - - switch (qc->tf.protocol) { - case ATA_PROT_DMA: - case ATA_PROT_NODATA: - ata_port_printk(ap, KERN_ERR, "command timeout\n"); - drv_stat = ata_wait_idle(ap); - qc->err_mask |= __ac_err_mask(drv_stat); - break; - - default: - drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); - - ata_port_printk(ap, KERN_ERR, - "unknown timeout, cmd 0x%x stat 0x%x\n", - qc->tf.command, drv_stat); - - qc->err_mask |= ac_err_mask(drv_stat); - break; - } - - spin_unlock_irqrestore(&host_set->lock, flags); - ata_eh_qc_complete(qc); - DPRINTK("EXIT\n"); -} - -static inline unsigned int pdc_host_intr( struct ata_port *ap, - struct ata_queued_cmd *qc) -{ - unsigned int handled = 0; - u32 tmp; - void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_GLOBAL_CTL; - - tmp = readl(mmio); - if (tmp & PDC_ERR_MASK) { - qc->err_mask |= AC_ERR_DEV; - pdc_reset_port(ap); - } - - switch (qc->tf.protocol) { - case ATA_PROT_DMA: - case ATA_PROT_NODATA: - qc->err_mask |= ac_err_mask(ata_wait_idle(ap)); - ata_qc_complete(qc); - handled = 1; - break; - - default: - ap->stats.idle_irq++; - break; - } - - return handled; -} - -static void pdc_irq_clear(struct ata_port *ap) -{ - struct ata_host_set *host_set = ap->host_set; - void __iomem *mmio = host_set->mmio_base; - - readl(mmio + PDC_INT_SEQMASK); -} - -static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - struct ata_port *ap; - u32 mask = 0; - unsigned int i, tmp; - unsigned int handled = 0; - void __iomem *mmio_base; - - VPRINTK("ENTER\n"); - - if (!host_set || !host_set->mmio_base) { - VPRINTK("QUICK EXIT\n"); - return IRQ_NONE; - } - - mmio_base = host_set->mmio_base; - - /* reading should also clear interrupts */ - mask = readl(mmio_base + PDC_INT_SEQMASK); - - if (mask == 0xffffffff) { - VPRINTK("QUICK EXIT 2\n"); - return IRQ_NONE; - } - - spin_lock(&host_set->lock); - - mask &= 0xffff; /* only 16 tags possible */ - if (!mask) { - VPRINTK("QUICK EXIT 3\n"); - goto done_irq; - } - - writel(mask, mmio_base + PDC_INT_SEQMASK); - - for (i = 0; i < host_set->n_ports; i++) { - VPRINTK("port %u\n", i); - ap = host_set->ports[i]; - tmp = mask & (1 << (i + 1)); - if (tmp && ap && - !(ap->flags & ATA_FLAG_DISABLED)) { - struct ata_queued_cmd *qc; - - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) - handled += pdc_host_intr(ap, qc); - } - } - - VPRINTK("EXIT\n"); - -done_irq: - spin_unlock(&host_set->lock); - return IRQ_RETVAL(handled); -} - -static inline void pdc_packet_start(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct pdc_port_priv *pp = ap->private_data; - unsigned int port_no = ap->port_no; - u8 seq = (u8) (port_no + 1); - - VPRINTK("ENTER, ap %p\n", ap); - - writel(0x00000001, ap->host_set->mmio_base + (seq * 4)); - readl(ap->host_set->mmio_base + (seq * 4)); /* flush */ - - pp->pkt[2] = seq; - wmb(); /* flush PRD, pkt writes */ - writel(pp->pkt_dma, (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); - readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */ -} - -static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc) -{ - switch (qc->tf.protocol) { - case ATA_PROT_DMA: - case ATA_PROT_NODATA: - pdc_packet_start(qc); - return 0; - - case ATA_PROT_ATAPI_DMA: - BUG(); - break; - - default: - break; - } - - return ata_qc_issue_prot(qc); -} - -static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - WARN_ON (tf->protocol == ATA_PROT_DMA || - tf->protocol == ATA_PROT_NODATA); - ata_tf_load(ap, tf); -} - - -static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - WARN_ON (tf->protocol == ATA_PROT_DMA || - tf->protocol == ATA_PROT_NODATA); - ata_exec_command(ap, tf); -} - - -static void pdc_ata_setup_port(struct ata_ioports *port, unsigned long base) -{ - port->cmd_addr = base; - port->data_addr = base; - port->feature_addr = - port->error_addr = base + 0x4; - port->nsect_addr = base + 0x8; - port->lbal_addr = base + 0xc; - port->lbam_addr = base + 0x10; - port->lbah_addr = base + 0x14; - port->device_addr = base + 0x18; - port->command_addr = - port->status_addr = base + 0x1c; - port->altstatus_addr = - port->ctl_addr = base + 0x38; -} - - -static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe) -{ - void __iomem *mmio = pe->mmio_base; - struct pdc_host_priv *hp = pe->private_data; - int hotplug_offset = hp->hotplug_offset; - u32 tmp; - - /* - * Except for the hotplug stuff, this is voodoo from the - * Promise driver. Label this entire section - * "TODO: figure out why we do this" - */ - - /* change FIFO_SHD to 8 dwords, enable BMR_BURST */ - tmp = readl(mmio + PDC_FLASH_CTL); - tmp |= 0x12000; /* bit 16 (fifo 8 dw) and 13 (bmr burst?) */ - writel(tmp, mmio + PDC_FLASH_CTL); - - /* clear plug/unplug flags for all ports */ - tmp = readl(mmio + hotplug_offset); - writel(tmp | 0xff, mmio + hotplug_offset); - - /* mask plug/unplug ints */ - tmp = readl(mmio + hotplug_offset); - writel(tmp | 0xff0000, mmio + hotplug_offset); - - /* reduce TBG clock to 133 Mhz. */ - tmp = readl(mmio + PDC_TBG_MODE); - tmp &= ~0x30000; /* clear bit 17, 16*/ - tmp |= 0x10000; /* set bit 17:16 = 0:1 */ - writel(tmp, mmio + PDC_TBG_MODE); - - readl(mmio + PDC_TBG_MODE); /* flush */ - msleep(10); - - /* adjust slew rate control register. */ - tmp = readl(mmio + PDC_SLEW_CTL); - tmp &= 0xFFFFF03F; /* clear bit 11 ~ 6 */ - tmp |= 0x00000900; /* set bit 11-9 = 100b , bit 8-6 = 100 */ - writel(tmp, mmio + PDC_SLEW_CTL); -} - -static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version; - struct ata_probe_ent *probe_ent = NULL; - struct pdc_host_priv *hp; - unsigned long base; - void __iomem *mmio_base; - unsigned int board_idx = (unsigned int) ent->driver_data; - int pci_dev_busy = 0; - int rc; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out; - } - - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) { - rc = -ENOMEM; - goto err_out_regions; - } - - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - mmio_base = pci_iomap(pdev, 3, 0); - if (mmio_base == NULL) { - rc = -ENOMEM; - goto err_out_free_ent; - } - base = (unsigned long) mmio_base; - - hp = kzalloc(sizeof(*hp), GFP_KERNEL); - if (hp == NULL) { - rc = -ENOMEM; - goto err_out_free_ent; - } - - /* Set default hotplug offset */ - hp->hotplug_offset = PDC_SATA_PLUG_CSR; - probe_ent->private_data = hp; - - probe_ent->sht = pdc_port_info[board_idx].sht; - probe_ent->host_flags = pdc_port_info[board_idx].host_flags; - probe_ent->pio_mask = pdc_port_info[board_idx].pio_mask; - probe_ent->mwdma_mask = pdc_port_info[board_idx].mwdma_mask; - probe_ent->udma_mask = pdc_port_info[board_idx].udma_mask; - probe_ent->port_ops = pdc_port_info[board_idx].port_ops; - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = SA_SHIRQ; - probe_ent->mmio_base = mmio_base; - - pdc_ata_setup_port(&probe_ent->port[0], base + 0x200); - pdc_ata_setup_port(&probe_ent->port[1], base + 0x280); - - probe_ent->port[0].scr_addr = base + 0x400; - probe_ent->port[1].scr_addr = base + 0x500; - - /* notice 4-port boards */ - switch (board_idx) { - case board_40518: - /* Override hotplug offset for SATAII150 */ - hp->hotplug_offset = PDC2_SATA_PLUG_CSR; - /* Fall through */ - case board_20319: - probe_ent->n_ports = 4; - - pdc_ata_setup_port(&probe_ent->port[2], base + 0x300); - pdc_ata_setup_port(&probe_ent->port[3], base + 0x380); - - probe_ent->port[2].scr_addr = base + 0x600; - probe_ent->port[3].scr_addr = base + 0x700; - break; - case board_2057x: - /* Override hotplug offset for SATAII150 */ - hp->hotplug_offset = PDC2_SATA_PLUG_CSR; - /* Fall through */ - case board_2037x: - probe_ent->n_ports = 2; - break; - case board_20771: - probe_ent->n_ports = 2; - break; - case board_20619: - probe_ent->n_ports = 4; - - pdc_ata_setup_port(&probe_ent->port[2], base + 0x300); - pdc_ata_setup_port(&probe_ent->port[3], base + 0x380); - - probe_ent->port[2].scr_addr = base + 0x600; - probe_ent->port[3].scr_addr = base + 0x700; - break; - default: - BUG(); - break; - } - - pci_set_master(pdev); - - /* initialize adapter */ - pdc_host_init(board_idx, probe_ent); - - /* FIXME: Need any other frees than hp? */ - if (!ata_device_add(probe_ent)) - kfree(hp); - - kfree(probe_ent); - - return 0; - -err_out_free_ent: - kfree(probe_ent); -err_out_regions: - pci_release_regions(pdev); -err_out: - if (!pci_dev_busy) - pci_disable_device(pdev); - return rc; -} - - -static int __init pdc_ata_init(void) -{ - return pci_module_init(&pdc_ata_pci_driver); -} - - -static void __exit pdc_ata_exit(void) -{ - pci_unregister_driver(&pdc_ata_pci_driver); -} - - -MODULE_AUTHOR("Jeff Garzik"); -MODULE_DESCRIPTION("Promise ATA TX2/TX4/TX4000 low-level driver"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, pdc_ata_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -module_init(pdc_ata_init); -module_exit(pdc_ata_exit); diff --git a/drivers/scsi/sata_promise.h b/drivers/scsi/sata_promise.h deleted file mode 100644 index 6ee5e190262..00000000000 --- a/drivers/scsi/sata_promise.h +++ /dev/null @@ -1,157 +0,0 @@ -/* - * sata_promise.h - Promise SATA common definitions and inline funcs - * - * Copyright 2003-2004 Red Hat, Inc. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - */ - -#ifndef __SATA_PROMISE_H__ -#define __SATA_PROMISE_H__ - -#include <linux/ata.h> - -enum pdc_packet_bits { - PDC_PKT_READ = (1 << 2), - PDC_PKT_NODATA = (1 << 3), - - PDC_PKT_SIZEMASK = (1 << 7) | (1 << 6) | (1 << 5), - PDC_PKT_CLEAR_BSY = (1 << 4), - PDC_PKT_WAIT_DRDY = (1 << 3) | (1 << 4), - PDC_LAST_REG = (1 << 3), - - PDC_REG_DEVCTL = (1 << 3) | (1 << 2) | (1 << 1), -}; - -static inline unsigned int pdc_pkt_header(struct ata_taskfile *tf, - dma_addr_t sg_table, - unsigned int devno, u8 *buf) -{ - u8 dev_reg; - u32 *buf32 = (u32 *) buf; - - /* set control bits (byte 0), zero delay seq id (byte 3), - * and seq id (byte 2) - */ - switch (tf->protocol) { - case ATA_PROT_DMA: - if (!(tf->flags & ATA_TFLAG_WRITE)) - buf32[0] = cpu_to_le32(PDC_PKT_READ); - else - buf32[0] = 0; - break; - - case ATA_PROT_NODATA: - buf32[0] = cpu_to_le32(PDC_PKT_NODATA); - break; - - default: - BUG(); - break; - } - - buf32[1] = cpu_to_le32(sg_table); /* S/G table addr */ - buf32[2] = 0; /* no next-packet */ - - if (devno == 0) - dev_reg = ATA_DEVICE_OBS; - else - dev_reg = ATA_DEVICE_OBS | ATA_DEV1; - - /* select device */ - buf[12] = (1 << 5) | PDC_PKT_CLEAR_BSY | ATA_REG_DEVICE; - buf[13] = dev_reg; - - /* device control register */ - buf[14] = (1 << 5) | PDC_REG_DEVCTL; - buf[15] = tf->ctl; - - return 16; /* offset of next byte */ -} - -static inline unsigned int pdc_pkt_footer(struct ata_taskfile *tf, u8 *buf, - unsigned int i) -{ - if (tf->flags & ATA_TFLAG_DEVICE) { - buf[i++] = (1 << 5) | ATA_REG_DEVICE; - buf[i++] = tf->device; - } - - /* and finally the command itself; also includes end-of-pkt marker */ - buf[i++] = (1 << 5) | PDC_LAST_REG | ATA_REG_CMD; - buf[i++] = tf->command; - - return i; -} - -static inline unsigned int pdc_prep_lba28(struct ata_taskfile *tf, u8 *buf, unsigned int i) -{ - /* the "(1 << 5)" should be read "(count << 5)" */ - - /* ATA command block registers */ - buf[i++] = (1 << 5) | ATA_REG_FEATURE; - buf[i++] = tf->feature; - - buf[i++] = (1 << 5) | ATA_REG_NSECT; - buf[i++] = tf->nsect; - - buf[i++] = (1 << 5) | ATA_REG_LBAL; - buf[i++] = tf->lbal; - - buf[i++] = (1 << 5) | ATA_REG_LBAM; - buf[i++] = tf->lbam; - - buf[i++] = (1 << 5) | ATA_REG_LBAH; - buf[i++] = tf->lbah; - - return i; -} - -static inline unsigned int pdc_prep_lba48(struct ata_taskfile *tf, u8 *buf, unsigned int i) -{ - /* the "(2 << 5)" should be read "(count << 5)" */ - - /* ATA command block registers */ - buf[i++] = (2 << 5) | ATA_REG_FEATURE; - buf[i++] = tf->hob_feature; - buf[i++] = tf->feature; - - buf[i++] = (2 << 5) | ATA_REG_NSECT; - buf[i++] = tf->hob_nsect; - buf[i++] = tf->nsect; - - buf[i++] = (2 << 5) | ATA_REG_LBAL; - buf[i++] = tf->hob_lbal; - buf[i++] = tf->lbal; - - buf[i++] = (2 << 5) | ATA_REG_LBAM; - buf[i++] = tf->hob_lbam; - buf[i++] = tf->lbam; - - buf[i++] = (2 << 5) | ATA_REG_LBAH; - buf[i++] = tf->hob_lbah; - buf[i++] = tf->lbah; - - return i; -} - - -#endif /* __SATA_PROMISE_H__ */ diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c deleted file mode 100644 index 98ddc25655f..00000000000 --- a/drivers/scsi/sata_qstor.c +++ /dev/null @@ -1,730 +0,0 @@ -/* - * sata_qstor.c - Pacific Digital Corporation QStor SATA - * - * Maintained by: Mark Lord <mlord@pobox.com> - * - * Copyright 2005 Pacific Digital Corporation. - * (OSL/GPL code release authorized by Jalil Fadavi). - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/blkdev.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/sched.h> -#include <linux/device.h> -#include <scsi/scsi_host.h> -#include <asm/io.h> -#include <linux/libata.h> - -#define DRV_NAME "sata_qstor" -#define DRV_VERSION "0.06" - -enum { - QS_PORTS = 4, - QS_MAX_PRD = LIBATA_MAX_PRD, - QS_CPB_ORDER = 6, - QS_CPB_BYTES = (1 << QS_CPB_ORDER), - QS_PRD_BYTES = QS_MAX_PRD * 16, - QS_PKT_BYTES = QS_CPB_BYTES + QS_PRD_BYTES, - - /* global register offsets */ - QS_HCF_CNFG3 = 0x0003, /* host configuration offset */ - QS_HID_HPHY = 0x0004, /* host physical interface info */ - QS_HCT_CTRL = 0x00e4, /* global interrupt mask offset */ - QS_HST_SFF = 0x0100, /* host status fifo offset */ - QS_HVS_SERD3 = 0x0393, /* PHY enable offset */ - - /* global control bits */ - QS_HPHY_64BIT = (1 << 1), /* 64-bit bus detected */ - QS_CNFG3_GSRST = 0x01, /* global chip reset */ - QS_SERD3_PHY_ENA = 0xf0, /* PHY detection ENAble*/ - - /* per-channel register offsets */ - QS_CCF_CPBA = 0x0710, /* chan CPB base address */ - QS_CCF_CSEP = 0x0718, /* chan CPB separation factor */ - QS_CFC_HUFT = 0x0800, /* host upstream fifo threshold */ - QS_CFC_HDFT = 0x0804, /* host downstream fifo threshold */ - QS_CFC_DUFT = 0x0808, /* dev upstream fifo threshold */ - QS_CFC_DDFT = 0x080c, /* dev downstream fifo threshold */ - QS_CCT_CTR0 = 0x0900, /* chan control-0 offset */ - QS_CCT_CTR1 = 0x0901, /* chan control-1 offset */ - QS_CCT_CFF = 0x0a00, /* chan command fifo offset */ - - /* channel control bits */ - QS_CTR0_REG = (1 << 1), /* register mode (vs. pkt mode) */ - QS_CTR0_CLER = (1 << 2), /* clear channel errors */ - QS_CTR1_RDEV = (1 << 1), /* sata phy/comms reset */ - QS_CTR1_RCHN = (1 << 4), /* reset channel logic */ - QS_CCF_RUN_PKT = 0x107, /* RUN a new dma PKT */ - - /* pkt sub-field headers */ - QS_HCB_HDR = 0x01, /* Host Control Block header */ - QS_DCB_HDR = 0x02, /* Device Control Block header */ - - /* pkt HCB flag bits */ - QS_HF_DIRO = (1 << 0), /* data DIRection Out */ - QS_HF_DAT = (1 << 3), /* DATa pkt */ - QS_HF_IEN = (1 << 4), /* Interrupt ENable */ - QS_HF_VLD = (1 << 5), /* VaLiD pkt */ - - /* pkt DCB flag bits */ - QS_DF_PORD = (1 << 2), /* Pio OR Dma */ - QS_DF_ELBA = (1 << 3), /* Extended LBA (lba48) */ - - /* PCI device IDs */ - board_2068_idx = 0, /* QStor 4-port SATA/RAID */ -}; - -enum { - QS_DMA_BOUNDARY = ~0UL -}; - -typedef enum { qs_state_idle, qs_state_pkt, qs_state_mmio } qs_state_t; - -struct qs_port_priv { - u8 *pkt; - dma_addr_t pkt_dma; - qs_state_t state; -}; - -static u32 qs_scr_read (struct ata_port *ap, unsigned int sc_reg); -static void qs_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); -static int qs_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static irqreturn_t qs_intr (int irq, void *dev_instance, struct pt_regs *regs); -static int qs_port_start(struct ata_port *ap); -static void qs_host_stop(struct ata_host_set *host_set); -static void qs_port_stop(struct ata_port *ap); -static void qs_phy_reset(struct ata_port *ap); -static void qs_qc_prep(struct ata_queued_cmd *qc); -static unsigned int qs_qc_issue(struct ata_queued_cmd *qc); -static int qs_check_atapi_dma(struct ata_queued_cmd *qc); -static void qs_bmdma_stop(struct ata_queued_cmd *qc); -static u8 qs_bmdma_status(struct ata_port *ap); -static void qs_irq_clear(struct ata_port *ap); -static void qs_eng_timeout(struct ata_port *ap); - -static struct scsi_host_template qs_ata_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = QS_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - //FIXME .use_clustering = ATA_SHT_USE_CLUSTERING, - .use_clustering = ENABLE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = QS_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - -static const struct ata_port_operations qs_ata_ops = { - .port_disable = ata_port_disable, - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .check_atapi_dma = qs_check_atapi_dma, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - .phy_reset = qs_phy_reset, - .qc_prep = qs_qc_prep, - .qc_issue = qs_qc_issue, - .data_xfer = ata_mmio_data_xfer, - .eng_timeout = qs_eng_timeout, - .irq_handler = qs_intr, - .irq_clear = qs_irq_clear, - .scr_read = qs_scr_read, - .scr_write = qs_scr_write, - .port_start = qs_port_start, - .port_stop = qs_port_stop, - .host_stop = qs_host_stop, - .bmdma_stop = qs_bmdma_stop, - .bmdma_status = qs_bmdma_status, -}; - -static const struct ata_port_info qs_port_info[] = { - /* board_2068_idx */ - { - .sht = &qs_ata_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | - //FIXME ATA_FLAG_SRST | - ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING, - .pio_mask = 0x10, /* pio4 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &qs_ata_ops, - }, -}; - -static const struct pci_device_id qs_ata_pci_tbl[] = { - { PCI_VENDOR_ID_PDC, 0x2068, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_2068_idx }, - - { } /* terminate list */ -}; - -static struct pci_driver qs_ata_pci_driver = { - .name = DRV_NAME, - .id_table = qs_ata_pci_tbl, - .probe = qs_ata_init_one, - .remove = ata_pci_remove_one, -}; - -static int qs_check_atapi_dma(struct ata_queued_cmd *qc) -{ - return 1; /* ATAPI DMA not supported */ -} - -static void qs_bmdma_stop(struct ata_queued_cmd *qc) -{ - /* nothing */ -} - -static u8 qs_bmdma_status(struct ata_port *ap) -{ - return 0; -} - -static void qs_irq_clear(struct ata_port *ap) -{ - /* nothing */ -} - -static inline void qs_enter_reg_mode(struct ata_port *ap) -{ - u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000); - - writeb(QS_CTR0_REG, chan + QS_CCT_CTR0); - readb(chan + QS_CCT_CTR0); /* flush */ -} - -static inline void qs_reset_channel_logic(struct ata_port *ap) -{ - u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000); - - writeb(QS_CTR1_RCHN, chan + QS_CCT_CTR1); - readb(chan + QS_CCT_CTR0); /* flush */ - qs_enter_reg_mode(ap); -} - -static void qs_phy_reset(struct ata_port *ap) -{ - struct qs_port_priv *pp = ap->private_data; - - pp->state = qs_state_idle; - qs_reset_channel_logic(ap); - sata_phy_reset(ap); -} - -static void qs_eng_timeout(struct ata_port *ap) -{ - struct qs_port_priv *pp = ap->private_data; - - if (pp->state != qs_state_idle) /* healthy paranoia */ - pp->state = qs_state_mmio; - qs_reset_channel_logic(ap); - ata_eng_timeout(ap); -} - -static u32 qs_scr_read (struct ata_port *ap, unsigned int sc_reg) -{ - if (sc_reg > SCR_CONTROL) - return ~0U; - return readl((void __iomem *)(ap->ioaddr.scr_addr + (sc_reg * 8))); -} - -static void qs_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) -{ - if (sc_reg > SCR_CONTROL) - return; - writel(val, (void __iomem *)(ap->ioaddr.scr_addr + (sc_reg * 8))); -} - -static unsigned int qs_fill_sg(struct ata_queued_cmd *qc) -{ - struct scatterlist *sg; - struct ata_port *ap = qc->ap; - struct qs_port_priv *pp = ap->private_data; - unsigned int nelem; - u8 *prd = pp->pkt + QS_CPB_BYTES; - - WARN_ON(qc->__sg == NULL); - WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); - - nelem = 0; - ata_for_each_sg(sg, qc) { - u64 addr; - u32 len; - - addr = sg_dma_address(sg); - *(__le64 *)prd = cpu_to_le64(addr); - prd += sizeof(u64); - - len = sg_dma_len(sg); - *(__le32 *)prd = cpu_to_le32(len); - prd += sizeof(u64); - - VPRINTK("PRD[%u] = (0x%llX, 0x%X)\n", nelem, - (unsigned long long)addr, len); - nelem++; - } - - return nelem; -} - -static void qs_qc_prep(struct ata_queued_cmd *qc) -{ - struct qs_port_priv *pp = qc->ap->private_data; - u8 dflags = QS_DF_PORD, *buf = pp->pkt; - u8 hflags = QS_HF_DAT | QS_HF_IEN | QS_HF_VLD; - u64 addr; - unsigned int nelem; - - VPRINTK("ENTER\n"); - - qs_enter_reg_mode(qc->ap); - if (qc->tf.protocol != ATA_PROT_DMA) { - ata_qc_prep(qc); - return; - } - - nelem = qs_fill_sg(qc); - - if ((qc->tf.flags & ATA_TFLAG_WRITE)) - hflags |= QS_HF_DIRO; - if ((qc->tf.flags & ATA_TFLAG_LBA48)) - dflags |= QS_DF_ELBA; - - /* host control block (HCB) */ - buf[ 0] = QS_HCB_HDR; - buf[ 1] = hflags; - *(__le32 *)(&buf[ 4]) = cpu_to_le32(qc->nsect * ATA_SECT_SIZE); - *(__le32 *)(&buf[ 8]) = cpu_to_le32(nelem); - addr = ((u64)pp->pkt_dma) + QS_CPB_BYTES; - *(__le64 *)(&buf[16]) = cpu_to_le64(addr); - - /* device control block (DCB) */ - buf[24] = QS_DCB_HDR; - buf[28] = dflags; - - /* frame information structure (FIS) */ - ata_tf_to_fis(&qc->tf, &buf[32], 0); -} - -static inline void qs_packet_start(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000); - - VPRINTK("ENTER, ap %p\n", ap); - - writeb(QS_CTR0_CLER, chan + QS_CCT_CTR0); - wmb(); /* flush PRDs and pkt to memory */ - writel(QS_CCF_RUN_PKT, chan + QS_CCT_CFF); - readl(chan + QS_CCT_CFF); /* flush */ -} - -static unsigned int qs_qc_issue(struct ata_queued_cmd *qc) -{ - struct qs_port_priv *pp = qc->ap->private_data; - - switch (qc->tf.protocol) { - case ATA_PROT_DMA: - - pp->state = qs_state_pkt; - qs_packet_start(qc); - return 0; - - case ATA_PROT_ATAPI_DMA: - BUG(); - break; - - default: - break; - } - - pp->state = qs_state_mmio; - return ata_qc_issue_prot(qc); -} - -static inline unsigned int qs_intr_pkt(struct ata_host_set *host_set) -{ - unsigned int handled = 0; - u8 sFFE; - u8 __iomem *mmio_base = host_set->mmio_base; - - do { - u32 sff0 = readl(mmio_base + QS_HST_SFF); - u32 sff1 = readl(mmio_base + QS_HST_SFF + 4); - u8 sEVLD = (sff1 >> 30) & 0x01; /* valid flag */ - sFFE = sff1 >> 31; /* empty flag */ - - if (sEVLD) { - u8 sDST = sff0 >> 16; /* dev status */ - u8 sHST = sff1 & 0x3f; /* host status */ - unsigned int port_no = (sff1 >> 8) & 0x03; - struct ata_port *ap = host_set->ports[port_no]; - - DPRINTK("SFF=%08x%08x: sCHAN=%u sHST=%d sDST=%02x\n", - sff1, sff0, port_no, sHST, sDST); - handled = 1; - if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { - struct ata_queued_cmd *qc; - struct qs_port_priv *pp = ap->private_data; - if (!pp || pp->state != qs_state_pkt) - continue; - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { - switch (sHST) { - case 0: /* successful CPB */ - case 3: /* device error */ - pp->state = qs_state_idle; - qs_enter_reg_mode(qc->ap); - qc->err_mask |= ac_err_mask(sDST); - ata_qc_complete(qc); - break; - default: - break; - } - } - } - } - } while (!sFFE); - return handled; -} - -static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set) -{ - unsigned int handled = 0, port_no; - - for (port_no = 0; port_no < host_set->n_ports; ++port_no) { - struct ata_port *ap; - ap = host_set->ports[port_no]; - if (ap && - !(ap->flags & ATA_FLAG_DISABLED)) { - struct ata_queued_cmd *qc; - struct qs_port_priv *pp = ap->private_data; - if (!pp || pp->state != qs_state_mmio) - continue; - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) { - - /* check main status, clearing INTRQ */ - u8 status = ata_check_status(ap); - if ((status & ATA_BUSY)) - continue; - DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", - ap->id, qc->tf.protocol, status); - - /* complete taskfile transaction */ - pp->state = qs_state_idle; - qc->err_mask |= ac_err_mask(status); - ata_qc_complete(qc); - handled = 1; - } - } - } - return handled; -} - -static irqreturn_t qs_intr(int irq, void *dev_instance, struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - unsigned int handled = 0; - - VPRINTK("ENTER\n"); - - spin_lock(&host_set->lock); - handled = qs_intr_pkt(host_set) | qs_intr_mmio(host_set); - spin_unlock(&host_set->lock); - - VPRINTK("EXIT\n"); - - return IRQ_RETVAL(handled); -} - -static void qs_ata_setup_port(struct ata_ioports *port, unsigned long base) -{ - port->cmd_addr = - port->data_addr = base + 0x400; - port->error_addr = - port->feature_addr = base + 0x408; /* hob_feature = 0x409 */ - port->nsect_addr = base + 0x410; /* hob_nsect = 0x411 */ - port->lbal_addr = base + 0x418; /* hob_lbal = 0x419 */ - port->lbam_addr = base + 0x420; /* hob_lbam = 0x421 */ - port->lbah_addr = base + 0x428; /* hob_lbah = 0x429 */ - port->device_addr = base + 0x430; - port->status_addr = - port->command_addr = base + 0x438; - port->altstatus_addr = - port->ctl_addr = base + 0x440; - port->scr_addr = base + 0xc00; -} - -static int qs_port_start(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct qs_port_priv *pp; - void __iomem *mmio_base = ap->host_set->mmio_base; - void __iomem *chan = mmio_base + (ap->port_no * 0x4000); - u64 addr; - int rc; - - rc = ata_port_start(ap); - if (rc) - return rc; - qs_enter_reg_mode(ap); - pp = kzalloc(sizeof(*pp), GFP_KERNEL); - if (!pp) { - rc = -ENOMEM; - goto err_out; - } - pp->pkt = dma_alloc_coherent(dev, QS_PKT_BYTES, &pp->pkt_dma, - GFP_KERNEL); - if (!pp->pkt) { - rc = -ENOMEM; - goto err_out_kfree; - } - memset(pp->pkt, 0, QS_PKT_BYTES); - ap->private_data = pp; - - addr = (u64)pp->pkt_dma; - writel((u32) addr, chan + QS_CCF_CPBA); - writel((u32)(addr >> 32), chan + QS_CCF_CPBA + 4); - return 0; - -err_out_kfree: - kfree(pp); -err_out: - ata_port_stop(ap); - return rc; -} - -static void qs_port_stop(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct qs_port_priv *pp = ap->private_data; - - if (pp != NULL) { - ap->private_data = NULL; - if (pp->pkt != NULL) - dma_free_coherent(dev, QS_PKT_BYTES, pp->pkt, - pp->pkt_dma); - kfree(pp); - } - ata_port_stop(ap); -} - -static void qs_host_stop(struct ata_host_set *host_set) -{ - void __iomem *mmio_base = host_set->mmio_base; - struct pci_dev *pdev = to_pci_dev(host_set->dev); - - writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */ - writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */ - - pci_iounmap(pdev, mmio_base); -} - -static void qs_host_init(unsigned int chip_id, struct ata_probe_ent *pe) -{ - void __iomem *mmio_base = pe->mmio_base; - unsigned int port_no; - - writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */ - writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */ - - /* reset each channel in turn */ - for (port_no = 0; port_no < pe->n_ports; ++port_no) { - u8 __iomem *chan = mmio_base + (port_no * 0x4000); - writeb(QS_CTR1_RDEV|QS_CTR1_RCHN, chan + QS_CCT_CTR1); - writeb(QS_CTR0_REG, chan + QS_CCT_CTR0); - readb(chan + QS_CCT_CTR0); /* flush */ - } - writeb(QS_SERD3_PHY_ENA, mmio_base + QS_HVS_SERD3); /* enable phy */ - - for (port_no = 0; port_no < pe->n_ports; ++port_no) { - u8 __iomem *chan = mmio_base + (port_no * 0x4000); - /* set FIFO depths to same settings as Windows driver */ - writew(32, chan + QS_CFC_HUFT); - writew(32, chan + QS_CFC_HDFT); - writew(10, chan + QS_CFC_DUFT); - writew( 8, chan + QS_CFC_DDFT); - /* set CPB size in bytes, as a power of two */ - writeb(QS_CPB_ORDER, chan + QS_CCF_CSEP); - } - writeb(1, mmio_base + QS_HCT_CTRL); /* enable host interrupts */ -} - -/* - * The QStor understands 64-bit buses, and uses 64-bit fields - * for DMA pointers regardless of bus width. We just have to - * make sure our DMA masks are set appropriately for whatever - * bridge lies between us and the QStor, and then the DMA mapping - * code will ensure we only ever "see" appropriate buffer addresses. - * If we're 32-bit limited somewhere, then our 64-bit fields will - * just end up with zeros in the upper 32-bits, without any special - * logic required outside of this routine (below). - */ -static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base) -{ - u32 bus_info = readl(mmio_base + QS_HID_HPHY); - int rc, have_64bit_bus = (bus_info & QS_HPHY_64BIT); - - if (have_64bit_bus && - !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { - rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); - if (rc) { - rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "64-bit DMA enable failed\n"); - return rc; - } - } - } else { - rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit DMA enable failed\n"); - return rc; - } - rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit consistent DMA enable failed\n"); - return rc; - } - } - return 0; -} - -static int qs_ata_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - static int printed_version; - struct ata_probe_ent *probe_ent = NULL; - void __iomem *mmio_base; - unsigned int board_idx = (unsigned int) ent->driver_data; - int rc, port_no; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) - goto err_out; - - if ((pci_resource_flags(pdev, 4) & IORESOURCE_MEM) == 0) { - rc = -ENODEV; - goto err_out_regions; - } - - mmio_base = pci_iomap(pdev, 4, 0); - if (mmio_base == NULL) { - rc = -ENOMEM; - goto err_out_regions; - } - - rc = qs_set_dma_masks(pdev, mmio_base); - if (rc) - goto err_out_iounmap; - - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) { - rc = -ENOMEM; - goto err_out_iounmap; - } - - memset(probe_ent, 0, sizeof(*probe_ent)); - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - probe_ent->sht = qs_port_info[board_idx].sht; - probe_ent->host_flags = qs_port_info[board_idx].host_flags; - probe_ent->pio_mask = qs_port_info[board_idx].pio_mask; - probe_ent->mwdma_mask = qs_port_info[board_idx].mwdma_mask; - probe_ent->udma_mask = qs_port_info[board_idx].udma_mask; - probe_ent->port_ops = qs_port_info[board_idx].port_ops; - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = SA_SHIRQ; - probe_ent->mmio_base = mmio_base; - probe_ent->n_ports = QS_PORTS; - - for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) { - unsigned long chan = (unsigned long)mmio_base + - (port_no * 0x4000); - qs_ata_setup_port(&probe_ent->port[port_no], chan); - } - - pci_set_master(pdev); - - /* initialize adapter */ - qs_host_init(board_idx, probe_ent); - - rc = ata_device_add(probe_ent); - kfree(probe_ent); - if (rc != QS_PORTS) - goto err_out_iounmap; - return 0; - -err_out_iounmap: - pci_iounmap(pdev, mmio_base); -err_out_regions: - pci_release_regions(pdev); -err_out: - pci_disable_device(pdev); - return rc; -} - -static int __init qs_ata_init(void) -{ - return pci_module_init(&qs_ata_pci_driver); -} - -static void __exit qs_ata_exit(void) -{ - pci_unregister_driver(&qs_ata_pci_driver); -} - -MODULE_AUTHOR("Mark Lord"); -MODULE_DESCRIPTION("Pacific Digital Corporation QStor SATA low-level driver"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, qs_ata_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -module_init(qs_ata_init); -module_exit(qs_ata_exit); diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c deleted file mode 100644 index bc9f918a7f2..00000000000 --- a/drivers/scsi/sata_sil.c +++ /dev/null @@ -1,683 +0,0 @@ -/* - * sata_sil.c - Silicon Image SATA - * - * Maintained by: Jeff Garzik <jgarzik@pobox.com> - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2003-2005 Red Hat, Inc. - * Copyright 2003 Benjamin Herrenschmidt - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Documentation for SiI 3112: - * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2 - * - * Other errata and documentation available under NDA. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/blkdev.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <scsi/scsi_host.h> -#include <linux/libata.h> - -#define DRV_NAME "sata_sil" -#define DRV_VERSION "1.0" - -enum { - /* - * host flags - */ - SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29), - SIL_FLAG_MOD15WRITE = (1 << 30), - - SIL_DFL_HOST_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_HRST_TO_RESUME, - - /* - * Controller IDs - */ - sil_3112 = 0, - sil_3512 = 1, - sil_3114 = 2, - - /* - * Register offsets - */ - SIL_SYSCFG = 0x48, - - /* - * Register bits - */ - /* SYSCFG */ - SIL_MASK_IDE0_INT = (1 << 22), - SIL_MASK_IDE1_INT = (1 << 23), - SIL_MASK_IDE2_INT = (1 << 24), - SIL_MASK_IDE3_INT = (1 << 25), - SIL_MASK_2PORT = SIL_MASK_IDE0_INT | SIL_MASK_IDE1_INT, - SIL_MASK_4PORT = SIL_MASK_2PORT | - SIL_MASK_IDE2_INT | SIL_MASK_IDE3_INT, - - /* BMDMA/BMDMA2 */ - SIL_INTR_STEERING = (1 << 1), - - SIL_DMA_ENABLE = (1 << 0), /* DMA run switch */ - SIL_DMA_RDWR = (1 << 3), /* DMA Rd-Wr */ - SIL_DMA_SATA_IRQ = (1 << 4), /* OR of all SATA IRQs */ - SIL_DMA_ACTIVE = (1 << 16), /* DMA running */ - SIL_DMA_ERROR = (1 << 17), /* PCI bus error */ - SIL_DMA_COMPLETE = (1 << 18), /* cmd complete / IRQ pending */ - SIL_DMA_N_SATA_IRQ = (1 << 6), /* SATA_IRQ for the next channel */ - SIL_DMA_N_ACTIVE = (1 << 24), /* ACTIVE for the next channel */ - SIL_DMA_N_ERROR = (1 << 25), /* ERROR for the next channel */ - SIL_DMA_N_COMPLETE = (1 << 26), /* COMPLETE for the next channel */ - - /* SIEN */ - SIL_SIEN_N = (1 << 16), /* triggered by SError.N */ - - /* - * Others - */ - SIL_QUIRK_MOD15WRITE = (1 << 0), - SIL_QUIRK_UDMA5MAX = (1 << 1), -}; - -static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static void sil_dev_config(struct ata_port *ap, struct ata_device *dev); -static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg); -static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); -static void sil_post_set_mode (struct ata_port *ap); -static irqreturn_t sil_interrupt(int irq, void *dev_instance, - struct pt_regs *regs); -static void sil_freeze(struct ata_port *ap); -static void sil_thaw(struct ata_port *ap); - - -static const struct pci_device_id sil_pci_tbl[] = { - { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, - { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, - { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3512 }, - { 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 }, - { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, - { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, - { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, - { } /* terminate list */ -}; - - -/* TODO firmware versions should be added - eric */ -static const struct sil_drivelist { - const char * product; - unsigned int quirk; -} sil_blacklist [] = { - { "ST320012AS", SIL_QUIRK_MOD15WRITE }, - { "ST330013AS", SIL_QUIRK_MOD15WRITE }, - { "ST340017AS", SIL_QUIRK_MOD15WRITE }, - { "ST360015AS", SIL_QUIRK_MOD15WRITE }, - { "ST380013AS", SIL_QUIRK_MOD15WRITE }, - { "ST380023AS", SIL_QUIRK_MOD15WRITE }, - { "ST3120023AS", SIL_QUIRK_MOD15WRITE }, - { "ST3160023AS", SIL_QUIRK_MOD15WRITE }, - { "ST3120026AS", SIL_QUIRK_MOD15WRITE }, - { "ST3200822AS", SIL_QUIRK_MOD15WRITE }, - { "ST340014ASL", SIL_QUIRK_MOD15WRITE }, - { "ST360014ASL", SIL_QUIRK_MOD15WRITE }, - { "ST380011ASL", SIL_QUIRK_MOD15WRITE }, - { "ST3120022ASL", SIL_QUIRK_MOD15WRITE }, - { "ST3160021ASL", SIL_QUIRK_MOD15WRITE }, - { "Maxtor 4D060H3", SIL_QUIRK_UDMA5MAX }, - { } -}; - -static struct pci_driver sil_pci_driver = { - .name = DRV_NAME, - .id_table = sil_pci_tbl, - .probe = sil_init_one, - .remove = ata_pci_remove_one, -}; - -static struct scsi_host_template sil_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - -static const struct ata_port_operations sil_ops = { - .port_disable = ata_port_disable, - .dev_config = sil_dev_config, - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - .post_set_mode = sil_post_set_mode, - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_mmio_data_xfer, - .freeze = sil_freeze, - .thaw = sil_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .irq_handler = sil_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .scr_read = sil_scr_read, - .scr_write = sil_scr_write, - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_pci_host_stop, -}; - -static const struct ata_port_info sil_port_info[] = { - /* sil_3112 */ - { - .sht = &sil_sht, - .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_MOD15WRITE, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x3f, /* udma0-5 */ - .port_ops = &sil_ops, - }, - /* sil_3512 */ - { - .sht = &sil_sht, - .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x3f, /* udma0-5 */ - .port_ops = &sil_ops, - }, - /* sil_3114 */ - { - .sht = &sil_sht, - .host_flags = SIL_DFL_HOST_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x3f, /* udma0-5 */ - .port_ops = &sil_ops, - }, -}; - -/* per-port register offsets */ -/* TODO: we can probably calculate rather than use a table */ -static const struct { - unsigned long tf; /* ATA taskfile register block */ - unsigned long ctl; /* ATA control/altstatus register block */ - unsigned long bmdma; /* DMA register block */ - unsigned long bmdma2; /* DMA register block #2 */ - unsigned long fifo_cfg; /* FIFO Valid Byte Count and Control */ - unsigned long scr; /* SATA control register block */ - unsigned long sien; /* SATA Interrupt Enable register */ - unsigned long xfer_mode;/* data transfer mode register */ - unsigned long sfis_cfg; /* SATA FIS reception config register */ -} sil_port[] = { - /* port 0 ... */ - { 0x80, 0x8A, 0x00, 0x10, 0x40, 0x100, 0x148, 0xb4, 0x14c }, - { 0xC0, 0xCA, 0x08, 0x18, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc }, - { 0x280, 0x28A, 0x200, 0x210, 0x240, 0x300, 0x348, 0x2b4, 0x34c }, - { 0x2C0, 0x2CA, 0x208, 0x218, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc }, - /* ... port 3 */ -}; - -MODULE_AUTHOR("Jeff Garzik"); -MODULE_DESCRIPTION("low-level driver for Silicon Image SATA controller"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, sil_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -static int slow_down = 0; -module_param(slow_down, int, 0444); -MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)"); - - -static unsigned char sil_get_device_cache_line(struct pci_dev *pdev) -{ - u8 cache_line = 0; - pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_line); - return cache_line; -} - -static void sil_post_set_mode (struct ata_port *ap) -{ - struct ata_host_set *host_set = ap->host_set; - struct ata_device *dev; - void __iomem *addr = - host_set->mmio_base + sil_port[ap->port_no].xfer_mode; - u32 tmp, dev_mode[2]; - unsigned int i; - - for (i = 0; i < 2; i++) { - dev = &ap->device[i]; - if (!ata_dev_enabled(dev)) - dev_mode[i] = 0; /* PIO0/1/2 */ - else if (dev->flags & ATA_DFLAG_PIO) - dev_mode[i] = 1; /* PIO3/4 */ - else - dev_mode[i] = 3; /* UDMA */ - /* value 2 indicates MDMA */ - } - - tmp = readl(addr); - tmp &= ~((1<<5) | (1<<4) | (1<<1) | (1<<0)); - tmp |= dev_mode[0]; - tmp |= (dev_mode[1] << 4); - writel(tmp, addr); - readl(addr); /* flush */ -} - -static inline unsigned long sil_scr_addr(struct ata_port *ap, unsigned int sc_reg) -{ - unsigned long offset = ap->ioaddr.scr_addr; - - switch (sc_reg) { - case SCR_STATUS: - return offset + 4; - case SCR_ERROR: - return offset + 8; - case SCR_CONTROL: - return offset; - default: - /* do nothing */ - break; - } - - return 0; -} - -static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg) -{ - void __iomem *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg); - if (mmio) - return readl(mmio); - return 0xffffffffU; -} - -static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) -{ - void *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg); - if (mmio) - writel(val, mmio); -} - -static void sil_host_intr(struct ata_port *ap, u32 bmdma2) -{ - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); - u8 status; - - if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) { - u32 serror; - - /* SIEN doesn't mask SATA IRQs on some 3112s. Those - * controllers continue to assert IRQ as long as - * SError bits are pending. Clear SError immediately. - */ - serror = sil_scr_read(ap, SCR_ERROR); - sil_scr_write(ap, SCR_ERROR, serror); - - /* Trigger hotplug and accumulate SError only if the - * port isn't already frozen. Otherwise, PHY events - * during hardreset makes controllers with broken SIEN - * repeat probing needlessly. - */ - if (!(ap->flags & ATA_FLAG_FROZEN)) { - ata_ehi_hotplugged(&ap->eh_info); - ap->eh_info.serror |= serror; - } - - goto freeze; - } - - if (unlikely(!qc || qc->tf.ctl & ATA_NIEN)) - goto freeze; - - /* Check whether we are expecting interrupt in this state */ - switch (ap->hsm_task_state) { - case HSM_ST_FIRST: - /* Some pre-ATAPI-4 devices assert INTRQ - * at this state when ready to receive CDB. - */ - - /* Check the ATA_DFLAG_CDB_INTR flag is enough here. - * The flag was turned on only for atapi devices. - * No need to check is_atapi_taskfile(&qc->tf) again. - */ - if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - goto err_hsm; - break; - case HSM_ST_LAST: - if (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_DMA) { - /* clear DMA-Start bit */ - ap->ops->bmdma_stop(qc); - - if (bmdma2 & SIL_DMA_ERROR) { - qc->err_mask |= AC_ERR_HOST_BUS; - ap->hsm_task_state = HSM_ST_ERR; - } - } - break; - case HSM_ST: - break; - default: - goto err_hsm; - } - - /* check main status, clearing INTRQ */ - status = ata_chk_status(ap); - if (unlikely(status & ATA_BUSY)) - goto err_hsm; - - /* ack bmdma irq events */ - ata_bmdma_irq_clear(ap); - - /* kick HSM in the ass */ - ata_hsm_move(ap, qc, status, 0); - - return; - - err_hsm: - qc->err_mask |= AC_ERR_HSM; - freeze: - ata_port_freeze(ap); -} - -static irqreturn_t sil_interrupt(int irq, void *dev_instance, - struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - void __iomem *mmio_base = host_set->mmio_base; - int handled = 0; - int i; - - spin_lock(&host_set->lock); - - for (i = 0; i < host_set->n_ports; i++) { - struct ata_port *ap = host_set->ports[i]; - u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2); - - if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED)) - continue; - - if (bmdma2 == 0xffffffff || - !(bmdma2 & (SIL_DMA_COMPLETE | SIL_DMA_SATA_IRQ))) - continue; - - sil_host_intr(ap, bmdma2); - handled = 1; - } - - spin_unlock(&host_set->lock); - - return IRQ_RETVAL(handled); -} - -static void sil_freeze(struct ata_port *ap) -{ - void __iomem *mmio_base = ap->host_set->mmio_base; - u32 tmp; - - /* global IRQ mask doesn't block SATA IRQ, turn off explicitly */ - writel(0, mmio_base + sil_port[ap->port_no].sien); - - /* plug IRQ */ - tmp = readl(mmio_base + SIL_SYSCFG); - tmp |= SIL_MASK_IDE0_INT << ap->port_no; - writel(tmp, mmio_base + SIL_SYSCFG); - readl(mmio_base + SIL_SYSCFG); /* flush */ -} - -static void sil_thaw(struct ata_port *ap) -{ - void __iomem *mmio_base = ap->host_set->mmio_base; - u32 tmp; - - /* clear IRQ */ - ata_chk_status(ap); - ata_bmdma_irq_clear(ap); - - /* turn on SATA IRQ */ - writel(SIL_SIEN_N, mmio_base + sil_port[ap->port_no].sien); - - /* turn on IRQ */ - tmp = readl(mmio_base + SIL_SYSCFG); - tmp &= ~(SIL_MASK_IDE0_INT << ap->port_no); - writel(tmp, mmio_base + SIL_SYSCFG); -} - -/** - * sil_dev_config - Apply device/host-specific errata fixups - * @ap: Port containing device to be examined - * @dev: Device to be examined - * - * After the IDENTIFY [PACKET] DEVICE step is complete, and a - * device is known to be present, this function is called. - * We apply two errata fixups which are specific to Silicon Image, - * a Seagate and a Maxtor fixup. - * - * For certain Seagate devices, we must limit the maximum sectors - * to under 8K. - * - * For certain Maxtor devices, we must not program the drive - * beyond udma5. - * - * Both fixups are unfairly pessimistic. As soon as I get more - * information on these errata, I will create a more exhaustive - * list, and apply the fixups to only the specific - * devices/hosts/firmwares that need it. - * - * 20040111 - Seagate drives affected by the Mod15Write bug are blacklisted - * The Maxtor quirk is in the blacklist, but I'm keeping the original - * pessimistic fix for the following reasons... - * - There seems to be less info on it, only one device gleaned off the - * Windows driver, maybe only one is affected. More info would be greatly - * appreciated. - * - But then again UDMA5 is hardly anything to complain about - */ -static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) -{ - unsigned int n, quirks = 0; - unsigned char model_num[41]; - - ata_id_c_string(dev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num)); - - for (n = 0; sil_blacklist[n].product; n++) - if (!strcmp(sil_blacklist[n].product, model_num)) { - quirks = sil_blacklist[n].quirk; - break; - } - - /* limit requests to 15 sectors */ - if (slow_down || - ((ap->flags & SIL_FLAG_MOD15WRITE) && - (quirks & SIL_QUIRK_MOD15WRITE))) { - ata_dev_printk(dev, KERN_INFO, "applying Seagate errata fix " - "(mod15write workaround)\n"); - dev->max_sectors = 15; - return; - } - - /* limit to udma5 */ - if (quirks & SIL_QUIRK_UDMA5MAX) { - ata_dev_printk(dev, KERN_INFO, - "applying Maxtor errata fix %s\n", model_num); - dev->udma_mask &= ATA_UDMA5; - return; - } -} - -static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version; - struct ata_probe_ent *probe_ent = NULL; - unsigned long base; - void __iomem *mmio_base; - int rc; - unsigned int i; - int pci_dev_busy = 0; - u32 tmp; - u8 cls; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out; - } - - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) { - rc = -ENOMEM; - goto err_out_regions; - } - - INIT_LIST_HEAD(&probe_ent->node); - probe_ent->dev = pci_dev_to_dev(pdev); - probe_ent->port_ops = sil_port_info[ent->driver_data].port_ops; - probe_ent->sht = sil_port_info[ent->driver_data].sht; - probe_ent->n_ports = (ent->driver_data == sil_3114) ? 4 : 2; - probe_ent->pio_mask = sil_port_info[ent->driver_data].pio_mask; - probe_ent->mwdma_mask = sil_port_info[ent->driver_data].mwdma_mask; - probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask; - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = SA_SHIRQ; - probe_ent->host_flags = sil_port_info[ent->driver_data].host_flags; - - mmio_base = pci_iomap(pdev, 5, 0); - if (mmio_base == NULL) { - rc = -ENOMEM; - goto err_out_free_ent; - } - - probe_ent->mmio_base = mmio_base; - - base = (unsigned long) mmio_base; - - for (i = 0; i < probe_ent->n_ports; i++) { - probe_ent->port[i].cmd_addr = base + sil_port[i].tf; - probe_ent->port[i].altstatus_addr = - probe_ent->port[i].ctl_addr = base + sil_port[i].ctl; - probe_ent->port[i].bmdma_addr = base + sil_port[i].bmdma; - probe_ent->port[i].scr_addr = base + sil_port[i].scr; - ata_std_ports(&probe_ent->port[i]); - } - - /* Initialize FIFO PCI bus arbitration */ - cls = sil_get_device_cache_line(pdev); - if (cls) { - cls >>= 3; - cls++; /* cls = (line_size/8)+1 */ - for (i = 0; i < probe_ent->n_ports; i++) - writew(cls << 8 | cls, - mmio_base + sil_port[i].fifo_cfg); - } else - dev_printk(KERN_WARNING, &pdev->dev, - "cache line size not set. Driver may not function\n"); - - /* Apply R_ERR on DMA activate FIS errata workaround */ - if (probe_ent->host_flags & SIL_FLAG_RERR_ON_DMA_ACT) { - int cnt; - - for (i = 0, cnt = 0; i < probe_ent->n_ports; i++) { - tmp = readl(mmio_base + sil_port[i].sfis_cfg); - if ((tmp & 0x3) != 0x01) - continue; - if (!cnt) - dev_printk(KERN_INFO, &pdev->dev, - "Applying R_ERR on DMA activate " - "FIS errata fix\n"); - writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg); - cnt++; - } - } - - if (ent->driver_data == sil_3114) { - /* flip the magic "make 4 ports work" bit */ - tmp = readl(mmio_base + sil_port[2].bmdma); - if ((tmp & SIL_INTR_STEERING) == 0) - writel(tmp | SIL_INTR_STEERING, - mmio_base + sil_port[2].bmdma); - } - - pci_set_master(pdev); - - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - kfree(probe_ent); - - return 0; - -err_out_free_ent: - kfree(probe_ent); -err_out_regions: - pci_release_regions(pdev); -err_out: - if (!pci_dev_busy) - pci_disable_device(pdev); - return rc; -} - -static int __init sil_init(void) -{ - return pci_module_init(&sil_pci_driver); -} - -static void __exit sil_exit(void) -{ - pci_unregister_driver(&sil_pci_driver); -} - - -module_init(sil_init); -module_exit(sil_exit); diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c deleted file mode 100644 index c8b477c6724..00000000000 --- a/drivers/scsi/sata_sil24.c +++ /dev/null @@ -1,1181 +0,0 @@ -/* - * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers - * - * Copyright 2005 Tejun Heo - * - * Based on preview driver from Silicon Image. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/blkdev.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/dma-mapping.h> -#include <linux/device.h> -#include <scsi/scsi_host.h> -#include <scsi/scsi_cmnd.h> -#include <linux/libata.h> -#include <asm/io.h> - -#define DRV_NAME "sata_sil24" -#define DRV_VERSION "0.24" - -/* - * Port request block (PRB) 32 bytes - */ -struct sil24_prb { - __le16 ctrl; - __le16 prot; - __le32 rx_cnt; - u8 fis[6 * 4]; -}; - -/* - * Scatter gather entry (SGE) 16 bytes - */ -struct sil24_sge { - __le64 addr; - __le32 cnt; - __le32 flags; -}; - -/* - * Port multiplier - */ -struct sil24_port_multiplier { - __le32 diag; - __le32 sactive; -}; - -enum { - /* - * Global controller registers (128 bytes @ BAR0) - */ - /* 32 bit regs */ - HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */ - HOST_CTRL = 0x40, - HOST_IRQ_STAT = 0x44, - HOST_PHY_CFG = 0x48, - HOST_BIST_CTRL = 0x50, - HOST_BIST_PTRN = 0x54, - HOST_BIST_STAT = 0x58, - HOST_MEM_BIST_STAT = 0x5c, - HOST_FLASH_CMD = 0x70, - /* 8 bit regs */ - HOST_FLASH_DATA = 0x74, - HOST_TRANSITION_DETECT = 0x75, - HOST_GPIO_CTRL = 0x76, - HOST_I2C_ADDR = 0x78, /* 32 bit */ - HOST_I2C_DATA = 0x7c, - HOST_I2C_XFER_CNT = 0x7e, - HOST_I2C_CTRL = 0x7f, - - /* HOST_SLOT_STAT bits */ - HOST_SSTAT_ATTN = (1 << 31), - - /* HOST_CTRL bits */ - HOST_CTRL_M66EN = (1 << 16), /* M66EN PCI bus signal */ - HOST_CTRL_TRDY = (1 << 17), /* latched PCI TRDY */ - HOST_CTRL_STOP = (1 << 18), /* latched PCI STOP */ - HOST_CTRL_DEVSEL = (1 << 19), /* latched PCI DEVSEL */ - HOST_CTRL_REQ64 = (1 << 20), /* latched PCI REQ64 */ - - /* - * Port registers - * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2) - */ - PORT_REGS_SIZE = 0x2000, - - PORT_LRAM = 0x0000, /* 31 LRAM slots and PM regs */ - PORT_LRAM_SLOT_SZ = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */ - - PORT_PM = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */ - /* 32 bit regs */ - PORT_CTRL_STAT = 0x1000, /* write: ctrl-set, read: stat */ - PORT_CTRL_CLR = 0x1004, /* write: ctrl-clear */ - PORT_IRQ_STAT = 0x1008, /* high: status, low: interrupt */ - PORT_IRQ_ENABLE_SET = 0x1010, /* write: enable-set */ - PORT_IRQ_ENABLE_CLR = 0x1014, /* write: enable-clear */ - PORT_ACTIVATE_UPPER_ADDR= 0x101c, - PORT_EXEC_FIFO = 0x1020, /* command execution fifo */ - PORT_CMD_ERR = 0x1024, /* command error number */ - PORT_FIS_CFG = 0x1028, - PORT_FIFO_THRES = 0x102c, - /* 16 bit regs */ - PORT_DECODE_ERR_CNT = 0x1040, - PORT_DECODE_ERR_THRESH = 0x1042, - PORT_CRC_ERR_CNT = 0x1044, - PORT_CRC_ERR_THRESH = 0x1046, - PORT_HSHK_ERR_CNT = 0x1048, - PORT_HSHK_ERR_THRESH = 0x104a, - /* 32 bit regs */ - PORT_PHY_CFG = 0x1050, - PORT_SLOT_STAT = 0x1800, - PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */ - PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */ - PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */ - PORT_SCONTROL = 0x1f00, - PORT_SSTATUS = 0x1f04, - PORT_SERROR = 0x1f08, - PORT_SACTIVE = 0x1f0c, - - /* PORT_CTRL_STAT bits */ - PORT_CS_PORT_RST = (1 << 0), /* port reset */ - PORT_CS_DEV_RST = (1 << 1), /* device reset */ - PORT_CS_INIT = (1 << 2), /* port initialize */ - PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */ - PORT_CS_CDB16 = (1 << 5), /* 0=12b cdb, 1=16b cdb */ - PORT_CS_RESUME = (1 << 6), /* port resume */ - PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */ - PORT_CS_PM_EN = (1 << 13), /* port multiplier enable */ - PORT_CS_RDY = (1 << 31), /* port ready to accept commands */ - - /* PORT_IRQ_STAT/ENABLE_SET/CLR */ - /* bits[11:0] are masked */ - PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */ - PORT_IRQ_ERROR = (1 << 1), /* command execution error */ - PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */ - PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */ - PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */ - PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */ - PORT_IRQ_UNK_FIS = (1 << 6), /* unknown FIS received */ - PORT_IRQ_DEV_XCHG = (1 << 7), /* device exchanged */ - PORT_IRQ_8B10B = (1 << 8), /* 8b/10b decode error threshold */ - PORT_IRQ_CRC = (1 << 9), /* CRC error threshold */ - PORT_IRQ_HANDSHAKE = (1 << 10), /* handshake error threshold */ - PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */ - - DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | - PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG | - PORT_IRQ_UNK_FIS, - - /* bits[27:16] are unmasked (raw) */ - PORT_IRQ_RAW_SHIFT = 16, - PORT_IRQ_MASKED_MASK = 0x7ff, - PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT), - - /* ENABLE_SET/CLR specific, intr steering - 2 bit field */ - PORT_IRQ_STEER_SHIFT = 30, - PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT), - - /* PORT_CMD_ERR constants */ - PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */ - PORT_CERR_SDB = 2, /* Error bit in SDB FIS */ - PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */ - PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */ - PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */ - PORT_CERR_DIRECTION = 6, /* Data direction mismatch */ - PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */ - PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */ - PORT_CERR_PKT_PROT = 11, /* DIR invalid in 1st PIO setup of ATAPI */ - PORT_CERR_SGT_BOUNDARY = 16, /* PLD ecode 00 - SGT not on qword boundary */ - PORT_CERR_SGT_TGTABRT = 17, /* PLD ecode 01 - target abort */ - PORT_CERR_SGT_MSTABRT = 18, /* PLD ecode 10 - master abort */ - PORT_CERR_SGT_PCIPERR = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */ - PORT_CERR_CMD_BOUNDARY = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */ - PORT_CERR_CMD_TGTABRT = 25, /* ctrl[15:13] 010 - target abort */ - PORT_CERR_CMD_MSTABRT = 26, /* ctrl[15:13] 100 - master abort */ - PORT_CERR_CMD_PCIPERR = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */ - PORT_CERR_XFR_UNDEF = 32, /* PSD ecode 00 - undefined */ - PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */ - PORT_CERR_XFR_MSTABRT = 34, /* PSD ecode 10 - master abort */ - PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */ - PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */ - - /* bits of PRB control field */ - PRB_CTRL_PROTOCOL = (1 << 0), /* override def. ATA protocol */ - PRB_CTRL_PACKET_READ = (1 << 4), /* PACKET cmd read */ - PRB_CTRL_PACKET_WRITE = (1 << 5), /* PACKET cmd write */ - PRB_CTRL_NIEN = (1 << 6), /* Mask completion irq */ - PRB_CTRL_SRST = (1 << 7), /* Soft reset request (ign BSY?) */ - - /* PRB protocol field */ - PRB_PROT_PACKET = (1 << 0), - PRB_PROT_TCQ = (1 << 1), - PRB_PROT_NCQ = (1 << 2), - PRB_PROT_READ = (1 << 3), - PRB_PROT_WRITE = (1 << 4), - PRB_PROT_TRANSPARENT = (1 << 5), - - /* - * Other constants - */ - SGE_TRM = (1 << 31), /* Last SGE in chain */ - SGE_LNK = (1 << 30), /* linked list - Points to SGT, not SGE */ - SGE_DRD = (1 << 29), /* discard data read (/dev/null) - data address ignored */ - - SIL24_MAX_CMDS = 31, - - /* board id */ - BID_SIL3124 = 0, - BID_SIL3132 = 1, - BID_SIL3131 = 2, - - /* host flags */ - SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY, - SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */ - - IRQ_STAT_4PORTS = 0xf, -}; - -struct sil24_ata_block { - struct sil24_prb prb; - struct sil24_sge sge[LIBATA_MAX_PRD]; -}; - -struct sil24_atapi_block { - struct sil24_prb prb; - u8 cdb[16]; - struct sil24_sge sge[LIBATA_MAX_PRD - 1]; -}; - -union sil24_cmd_block { - struct sil24_ata_block ata; - struct sil24_atapi_block atapi; -}; - -static struct sil24_cerr_info { - unsigned int err_mask, action; - const char *desc; -} sil24_cerr_db[] = { - [0] = { AC_ERR_DEV, ATA_EH_REVALIDATE, - "device error" }, - [PORT_CERR_DEV] = { AC_ERR_DEV, ATA_EH_REVALIDATE, - "device error via D2H FIS" }, - [PORT_CERR_SDB] = { AC_ERR_DEV, ATA_EH_REVALIDATE, - "device error via SDB FIS" }, - [PORT_CERR_DATA] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET, - "error in data FIS" }, - [PORT_CERR_SEND] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET, - "failed to transmit command FIS" }, - [PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_SOFTRESET, - "protocol mismatch" }, - [PORT_CERR_DIRECTION] = { AC_ERR_HSM, ATA_EH_SOFTRESET, - "data directon mismatch" }, - [PORT_CERR_UNDERRUN] = { AC_ERR_HSM, ATA_EH_SOFTRESET, - "ran out of SGEs while writing" }, - [PORT_CERR_OVERRUN] = { AC_ERR_HSM, ATA_EH_SOFTRESET, - "ran out of SGEs while reading" }, - [PORT_CERR_PKT_PROT] = { AC_ERR_HSM, ATA_EH_SOFTRESET, - "invalid data directon for ATAPI CDB" }, - [PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET, - "SGT no on qword boundary" }, - [PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, - "PCI target abort while fetching SGT" }, - [PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, - "PCI master abort while fetching SGT" }, - [PORT_CERR_SGT_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, - "PCI parity error while fetching SGT" }, - [PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET, - "PRB not on qword boundary" }, - [PORT_CERR_CMD_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, - "PCI target abort while fetching PRB" }, - [PORT_CERR_CMD_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, - "PCI master abort while fetching PRB" }, - [PORT_CERR_CMD_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, - "PCI parity error while fetching PRB" }, - [PORT_CERR_XFR_UNDEF] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, - "undefined error while transferring data" }, - [PORT_CERR_XFR_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, - "PCI target abort while transferring data" }, - [PORT_CERR_XFR_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, - "PCI master abort while transferring data" }, - [PORT_CERR_XFR_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET, - "PCI parity error while transferring data" }, - [PORT_CERR_SENDSERVICE] = { AC_ERR_HSM, ATA_EH_SOFTRESET, - "FIS received while sending service FIS" }, -}; - -/* - * ap->private_data - * - * The preview driver always returned 0 for status. We emulate it - * here from the previous interrupt. - */ -struct sil24_port_priv { - union sil24_cmd_block *cmd_block; /* 32 cmd blocks */ - dma_addr_t cmd_block_dma; /* DMA base addr for them */ - struct ata_taskfile tf; /* Cached taskfile registers */ -}; - -/* ap->host_set->private_data */ -struct sil24_host_priv { - void __iomem *host_base; /* global controller control (128 bytes @BAR0) */ - void __iomem *port_base; /* port registers (4 * 8192 bytes @BAR2) */ -}; - -static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev); -static u8 sil24_check_status(struct ata_port *ap); -static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg); -static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val); -static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf); -static void sil24_qc_prep(struct ata_queued_cmd *qc); -static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc); -static void sil24_irq_clear(struct ata_port *ap); -static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs); -static void sil24_freeze(struct ata_port *ap); -static void sil24_thaw(struct ata_port *ap); -static void sil24_error_handler(struct ata_port *ap); -static void sil24_post_internal_cmd(struct ata_queued_cmd *qc); -static int sil24_port_start(struct ata_port *ap); -static void sil24_port_stop(struct ata_port *ap); -static void sil24_host_stop(struct ata_host_set *host_set); -static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); - -static const struct pci_device_id sil24_pci_tbl[] = { - { 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, - { 0x8086, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, - { 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 }, - { 0x1095, 0x3131, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 }, - { 0x1095, 0x3531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 }, - { } /* terminate list */ -}; - -static struct pci_driver sil24_pci_driver = { - .name = DRV_NAME, - .id_table = sil24_pci_tbl, - .probe = sil24_init_one, - .remove = ata_pci_remove_one, /* safe? */ -}; - -static struct scsi_host_template sil24_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .change_queue_depth = ata_scsi_change_queue_depth, - .can_queue = SIL24_MAX_CMDS, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - -static const struct ata_port_operations sil24_ops = { - .port_disable = ata_port_disable, - - .dev_config = sil24_dev_config, - - .check_status = sil24_check_status, - .check_altstatus = sil24_check_status, - .dev_select = ata_noop_dev_select, - - .tf_read = sil24_tf_read, - - .qc_prep = sil24_qc_prep, - .qc_issue = sil24_qc_issue, - - .irq_handler = sil24_interrupt, - .irq_clear = sil24_irq_clear, - - .scr_read = sil24_scr_read, - .scr_write = sil24_scr_write, - - .freeze = sil24_freeze, - .thaw = sil24_thaw, - .error_handler = sil24_error_handler, - .post_internal_cmd = sil24_post_internal_cmd, - - .port_start = sil24_port_start, - .port_stop = sil24_port_stop, - .host_stop = sil24_host_stop, -}; - -/* - * Use bits 30-31 of host_flags to encode available port numbers. - * Current maxium is 4. - */ -#define SIL24_NPORTS2FLAG(nports) ((((unsigned)(nports) - 1) & 0x3) << 30) -#define SIL24_FLAG2NPORTS(flag) ((((flag) >> 30) & 0x3) + 1) - -static struct ata_port_info sil24_port_info[] = { - /* sil_3124 */ - { - .sht = &sil24_sht, - .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) | - SIL24_FLAG_PCIX_IRQ_WOC, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x3f, /* udma0-5 */ - .port_ops = &sil24_ops, - }, - /* sil_3132 */ - { - .sht = &sil24_sht, - .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2), - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x3f, /* udma0-5 */ - .port_ops = &sil24_ops, - }, - /* sil_3131/sil_3531 */ - { - .sht = &sil24_sht, - .host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1), - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x3f, /* udma0-5 */ - .port_ops = &sil24_ops, - }, -}; - -static int sil24_tag(int tag) -{ - if (unlikely(ata_tag_internal(tag))) - return 0; - return tag; -} - -static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev) -{ - void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - - if (dev->cdb_len == 16) - writel(PORT_CS_CDB16, port + PORT_CTRL_STAT); - else - writel(PORT_CS_CDB16, port + PORT_CTRL_CLR); -} - -static inline void sil24_update_tf(struct ata_port *ap) -{ - struct sil24_port_priv *pp = ap->private_data; - void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - struct sil24_prb __iomem *prb = port; - u8 fis[6 * 4]; - - memcpy_fromio(fis, prb->fis, 6 * 4); - ata_tf_from_fis(fis, &pp->tf); -} - -static u8 sil24_check_status(struct ata_port *ap) -{ - struct sil24_port_priv *pp = ap->private_data; - return pp->tf.command; -} - -static int sil24_scr_map[] = { - [SCR_CONTROL] = 0, - [SCR_STATUS] = 1, - [SCR_ERROR] = 2, - [SCR_ACTIVE] = 3, -}; - -static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg) -{ - void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr; - if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { - void __iomem *addr; - addr = scr_addr + sil24_scr_map[sc_reg] * 4; - return readl(scr_addr + sil24_scr_map[sc_reg] * 4); - } - return 0xffffffffU; -} - -static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val) -{ - void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr; - if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { - void __iomem *addr; - addr = scr_addr + sil24_scr_map[sc_reg] * 4; - writel(val, scr_addr + sil24_scr_map[sc_reg] * 4); - } -} - -static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct sil24_port_priv *pp = ap->private_data; - *tf = pp->tf; -} - -static int sil24_init_port(struct ata_port *ap) -{ - void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - u32 tmp; - - writel(PORT_CS_INIT, port + PORT_CTRL_STAT); - ata_wait_register(port + PORT_CTRL_STAT, - PORT_CS_INIT, PORT_CS_INIT, 10, 100); - tmp = ata_wait_register(port + PORT_CTRL_STAT, - PORT_CS_RDY, 0, 10, 100); - - if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) - return -EIO; - return 0; -} - -static int sil24_softreset(struct ata_port *ap, unsigned int *class) -{ - void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - struct sil24_port_priv *pp = ap->private_data; - struct sil24_prb *prb = &pp->cmd_block[0].ata.prb; - dma_addr_t paddr = pp->cmd_block_dma; - u32 mask, irq_stat; - const char *reason; - - DPRINTK("ENTER\n"); - - if (ata_port_offline(ap)) { - DPRINTK("PHY reports no device\n"); - *class = ATA_DEV_NONE; - goto out; - } - - /* put the port into known state */ - if (sil24_init_port(ap)) { - reason ="port not ready"; - goto err; - } - - /* do SRST */ - prb->ctrl = cpu_to_le16(PRB_CTRL_SRST); - prb->fis[1] = 0; /* no PM yet */ - - writel((u32)paddr, port + PORT_CMD_ACTIVATE); - writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4); - - mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT; - irq_stat = ata_wait_register(port + PORT_IRQ_STAT, mask, 0x0, - 100, ATA_TMOUT_BOOT / HZ * 1000); - - writel(irq_stat, port + PORT_IRQ_STAT); /* clear IRQs */ - irq_stat >>= PORT_IRQ_RAW_SHIFT; - - if (!(irq_stat & PORT_IRQ_COMPLETE)) { - if (irq_stat & PORT_IRQ_ERROR) - reason = "SRST command error"; - else - reason = "timeout"; - goto err; - } - - sil24_update_tf(ap); - *class = ata_dev_classify(&pp->tf); - - if (*class == ATA_DEV_UNKNOWN) - *class = ATA_DEV_NONE; - - out: - DPRINTK("EXIT, class=%u\n", *class); - return 0; - - err: - ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason); - return -EIO; -} - -static int sil24_hardreset(struct ata_port *ap, unsigned int *class) -{ - void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - const char *reason; - int tout_msec, rc; - u32 tmp; - - /* sil24 does the right thing(tm) without any protection */ - sata_set_spd(ap); - - tout_msec = 100; - if (ata_port_online(ap)) - tout_msec = 5000; - - writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); - tmp = ata_wait_register(port + PORT_CTRL_STAT, - PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10, tout_msec); - - /* SStatus oscillates between zero and valid status after - * DEV_RST, debounce it. - */ - rc = sata_phy_debounce(ap, sata_deb_timing_before_fsrst); - if (rc) { - reason = "PHY debouncing failed"; - goto err; - } - - if (tmp & PORT_CS_DEV_RST) { - if (ata_port_offline(ap)) - return 0; - reason = "link not ready"; - goto err; - } - - /* Sil24 doesn't store signature FIS after hardreset, so we - * can't wait for BSY to clear. Some devices take a long time - * to get ready and those devices will choke if we don't wait - * for BSY clearance here. Tell libata to perform follow-up - * softreset. - */ - return -EAGAIN; - - err: - ata_port_printk(ap, KERN_ERR, "hardreset failed (%s)\n", reason); - return -EIO; -} - -static inline void sil24_fill_sg(struct ata_queued_cmd *qc, - struct sil24_sge *sge) -{ - struct scatterlist *sg; - unsigned int idx = 0; - - ata_for_each_sg(sg, qc) { - sge->addr = cpu_to_le64(sg_dma_address(sg)); - sge->cnt = cpu_to_le32(sg_dma_len(sg)); - if (ata_sg_is_last(sg, qc)) - sge->flags = cpu_to_le32(SGE_TRM); - else - sge->flags = 0; - - sge++; - idx++; - } -} - -static void sil24_qc_prep(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct sil24_port_priv *pp = ap->private_data; - union sil24_cmd_block *cb; - struct sil24_prb *prb; - struct sil24_sge *sge; - u16 ctrl = 0; - - cb = &pp->cmd_block[sil24_tag(qc->tag)]; - - switch (qc->tf.protocol) { - case ATA_PROT_PIO: - case ATA_PROT_DMA: - case ATA_PROT_NCQ: - case ATA_PROT_NODATA: - prb = &cb->ata.prb; - sge = cb->ata.sge; - break; - - case ATA_PROT_ATAPI: - case ATA_PROT_ATAPI_DMA: - case ATA_PROT_ATAPI_NODATA: - prb = &cb->atapi.prb; - sge = cb->atapi.sge; - memset(cb->atapi.cdb, 0, 32); - memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len); - - if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) { - if (qc->tf.flags & ATA_TFLAG_WRITE) - ctrl = PRB_CTRL_PACKET_WRITE; - else - ctrl = PRB_CTRL_PACKET_READ; - } - break; - - default: - prb = NULL; /* shut up, gcc */ - sge = NULL; - BUG(); - } - - prb->ctrl = cpu_to_le16(ctrl); - ata_tf_to_fis(&qc->tf, prb->fis, 0); - - if (qc->flags & ATA_QCFLAG_DMAMAP) - sil24_fill_sg(qc, sge); -} - -static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct sil24_port_priv *pp = ap->private_data; - void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - unsigned int tag = sil24_tag(qc->tag); - dma_addr_t paddr; - void __iomem *activate; - - paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block); - activate = port + PORT_CMD_ACTIVATE + tag * 8; - - writel((u32)paddr, activate); - writel((u64)paddr >> 32, activate + 4); - - return 0; -} - -static void sil24_irq_clear(struct ata_port *ap) -{ - /* unused */ -} - -static void sil24_freeze(struct ata_port *ap) -{ - void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - - /* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear - * PORT_IRQ_ENABLE instead. - */ - writel(0xffff, port + PORT_IRQ_ENABLE_CLR); -} - -static void sil24_thaw(struct ata_port *ap) -{ - void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - u32 tmp; - - /* clear IRQ */ - tmp = readl(port + PORT_IRQ_STAT); - writel(tmp, port + PORT_IRQ_STAT); - - /* turn IRQ back on */ - writel(DEF_PORT_IRQ, port + PORT_IRQ_ENABLE_SET); -} - -static void sil24_error_intr(struct ata_port *ap) -{ - void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - struct ata_eh_info *ehi = &ap->eh_info; - int freeze = 0; - u32 irq_stat; - - /* on error, we need to clear IRQ explicitly */ - irq_stat = readl(port + PORT_IRQ_STAT); - writel(irq_stat, port + PORT_IRQ_STAT); - - /* first, analyze and record host port events */ - ata_ehi_clear_desc(ehi); - - ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat); - - if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) { - ata_ehi_hotplugged(ehi); - ata_ehi_push_desc(ehi, ", %s", - irq_stat & PORT_IRQ_PHYRDY_CHG ? - "PHY RDY changed" : "device exchanged"); - freeze = 1; - } - - if (irq_stat & PORT_IRQ_UNK_FIS) { - ehi->err_mask |= AC_ERR_HSM; - ehi->action |= ATA_EH_SOFTRESET; - ata_ehi_push_desc(ehi , ", unknown FIS"); - freeze = 1; - } - - /* deal with command error */ - if (irq_stat & PORT_IRQ_ERROR) { - struct sil24_cerr_info *ci = NULL; - unsigned int err_mask = 0, action = 0; - struct ata_queued_cmd *qc; - u32 cerr; - - /* analyze CMD_ERR */ - cerr = readl(port + PORT_CMD_ERR); - if (cerr < ARRAY_SIZE(sil24_cerr_db)) - ci = &sil24_cerr_db[cerr]; - - if (ci && ci->desc) { - err_mask |= ci->err_mask; - action |= ci->action; - ata_ehi_push_desc(ehi, ", %s", ci->desc); - } else { - err_mask |= AC_ERR_OTHER; - action |= ATA_EH_SOFTRESET; - ata_ehi_push_desc(ehi, ", unknown command error %d", - cerr); - } - - /* record error info */ - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc) { - sil24_update_tf(ap); - qc->err_mask |= err_mask; - } else - ehi->err_mask |= err_mask; - - ehi->action |= action; - } - - /* freeze or abort */ - if (freeze) - ata_port_freeze(ap); - else - ata_port_abort(ap); -} - -static void sil24_finish_qc(struct ata_queued_cmd *qc) -{ - if (qc->flags & ATA_QCFLAG_RESULT_TF) - sil24_update_tf(qc->ap); -} - -static inline void sil24_host_intr(struct ata_port *ap) -{ - void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; - u32 slot_stat, qc_active; - int rc; - - slot_stat = readl(port + PORT_SLOT_STAT); - - if (unlikely(slot_stat & HOST_SSTAT_ATTN)) { - sil24_error_intr(ap); - return; - } - - if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) - writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT); - - qc_active = slot_stat & ~HOST_SSTAT_ATTN; - rc = ata_qc_complete_multiple(ap, qc_active, sil24_finish_qc); - if (rc > 0) - return; - if (rc < 0) { - struct ata_eh_info *ehi = &ap->eh_info; - ehi->err_mask |= AC_ERR_HSM; - ehi->action |= ATA_EH_SOFTRESET; - ata_port_freeze(ap); - return; - } - - if (ata_ratelimit()) - ata_port_printk(ap, KERN_INFO, "spurious interrupt " - "(slot_stat 0x%x active_tag %d sactive 0x%x)\n", - slot_stat, ap->active_tag, ap->sactive); -} - -static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - struct sil24_host_priv *hpriv = host_set->private_data; - unsigned handled = 0; - u32 status; - int i; - - status = readl(hpriv->host_base + HOST_IRQ_STAT); - - if (status == 0xffffffff) { - printk(KERN_ERR DRV_NAME ": IRQ status == 0xffffffff, " - "PCI fault or device removal?\n"); - goto out; - } - - if (!(status & IRQ_STAT_4PORTS)) - goto out; - - spin_lock(&host_set->lock); - - for (i = 0; i < host_set->n_ports; i++) - if (status & (1 << i)) { - struct ata_port *ap = host_set->ports[i]; - if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { - sil24_host_intr(host_set->ports[i]); - handled++; - } else - printk(KERN_ERR DRV_NAME - ": interrupt from disabled port %d\n", i); - } - - spin_unlock(&host_set->lock); - out: - return IRQ_RETVAL(handled); -} - -static void sil24_error_handler(struct ata_port *ap) -{ - struct ata_eh_context *ehc = &ap->eh_context; - - if (sil24_init_port(ap)) { - ata_eh_freeze_port(ap); - ehc->i.action |= ATA_EH_HARDRESET; - } - - /* perform recovery */ - ata_do_eh(ap, ata_std_prereset, sil24_softreset, sil24_hardreset, - ata_std_postreset); -} - -static void sil24_post_internal_cmd(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - if (qc->flags & ATA_QCFLAG_FAILED) - qc->err_mask |= AC_ERR_OTHER; - - /* make DMA engine forget about the failed command */ - if (qc->err_mask) - sil24_init_port(ap); -} - -static inline void sil24_cblk_free(struct sil24_port_priv *pp, struct device *dev) -{ - const size_t cb_size = sizeof(*pp->cmd_block) * SIL24_MAX_CMDS; - - dma_free_coherent(dev, cb_size, pp->cmd_block, pp->cmd_block_dma); -} - -static int sil24_port_start(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct sil24_port_priv *pp; - union sil24_cmd_block *cb; - size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS; - dma_addr_t cb_dma; - int rc = -ENOMEM; - - pp = kzalloc(sizeof(*pp), GFP_KERNEL); - if (!pp) - goto err_out; - - pp->tf.command = ATA_DRDY; - - cb = dma_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL); - if (!cb) - goto err_out_pp; - memset(cb, 0, cb_size); - - rc = ata_pad_alloc(ap, dev); - if (rc) - goto err_out_pad; - - pp->cmd_block = cb; - pp->cmd_block_dma = cb_dma; - - ap->private_data = pp; - - return 0; - -err_out_pad: - sil24_cblk_free(pp, dev); -err_out_pp: - kfree(pp); -err_out: - return rc; -} - -static void sil24_port_stop(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct sil24_port_priv *pp = ap->private_data; - - sil24_cblk_free(pp, dev); - ata_pad_free(ap, dev); - kfree(pp); -} - -static void sil24_host_stop(struct ata_host_set *host_set) -{ - struct sil24_host_priv *hpriv = host_set->private_data; - struct pci_dev *pdev = to_pci_dev(host_set->dev); - - pci_iounmap(pdev, hpriv->host_base); - pci_iounmap(pdev, hpriv->port_base); - kfree(hpriv); -} - -static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version = 0; - unsigned int board_id = (unsigned int)ent->driver_data; - struct ata_port_info *pinfo = &sil24_port_info[board_id]; - struct ata_probe_ent *probe_ent = NULL; - struct sil24_host_priv *hpriv = NULL; - void __iomem *host_base = NULL; - void __iomem *port_base = NULL; - int i, rc; - u32 tmp; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) - goto out_disable; - - rc = -ENOMEM; - /* map mmio registers */ - host_base = pci_iomap(pdev, 0, 0); - if (!host_base) - goto out_free; - port_base = pci_iomap(pdev, 2, 0); - if (!port_base) - goto out_free; - - /* allocate & init probe_ent and hpriv */ - probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); - if (!probe_ent) - goto out_free; - - hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL); - if (!hpriv) - goto out_free; - - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - probe_ent->sht = pinfo->sht; - probe_ent->host_flags = pinfo->host_flags; - probe_ent->pio_mask = pinfo->pio_mask; - probe_ent->mwdma_mask = pinfo->mwdma_mask; - probe_ent->udma_mask = pinfo->udma_mask; - probe_ent->port_ops = pinfo->port_ops; - probe_ent->n_ports = SIL24_FLAG2NPORTS(pinfo->host_flags); - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = SA_SHIRQ; - probe_ent->mmio_base = port_base; - probe_ent->private_data = hpriv; - - hpriv->host_base = host_base; - hpriv->port_base = port_base; - - /* - * Configure the device - */ - if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { - rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); - if (rc) { - rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "64-bit DMA enable failed\n"); - goto out_free; - } - } - } else { - rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit DMA enable failed\n"); - goto out_free; - } - rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit consistent DMA enable failed\n"); - goto out_free; - } - } - - /* GPIO off */ - writel(0, host_base + HOST_FLASH_CMD); - - /* Apply workaround for completion IRQ loss on PCI-X errata */ - if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC) { - tmp = readl(host_base + HOST_CTRL); - if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL)) - dev_printk(KERN_INFO, &pdev->dev, - "Applying completion IRQ loss on PCI-X " - "errata fix\n"); - else - probe_ent->host_flags &= ~SIL24_FLAG_PCIX_IRQ_WOC; - } - - /* clear global reset & mask interrupts during initialization */ - writel(0, host_base + HOST_CTRL); - - for (i = 0; i < probe_ent->n_ports; i++) { - void __iomem *port = port_base + i * PORT_REGS_SIZE; - unsigned long portu = (unsigned long)port; - - probe_ent->port[i].cmd_addr = portu; - probe_ent->port[i].scr_addr = portu + PORT_SCONTROL; - - ata_std_ports(&probe_ent->port[i]); - - /* Initial PHY setting */ - writel(0x20c, port + PORT_PHY_CFG); - - /* Clear port RST */ - tmp = readl(port + PORT_CTRL_STAT); - if (tmp & PORT_CS_PORT_RST) { - writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); - tmp = ata_wait_register(port + PORT_CTRL_STAT, - PORT_CS_PORT_RST, - PORT_CS_PORT_RST, 10, 100); - if (tmp & PORT_CS_PORT_RST) - dev_printk(KERN_ERR, &pdev->dev, - "failed to clear port RST\n"); - } - - /* Configure IRQ WoC */ - if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC) - writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT); - else - writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); - - /* Zero error counters. */ - writel(0x8000, port + PORT_DECODE_ERR_THRESH); - writel(0x8000, port + PORT_CRC_ERR_THRESH); - writel(0x8000, port + PORT_HSHK_ERR_THRESH); - writel(0x0000, port + PORT_DECODE_ERR_CNT); - writel(0x0000, port + PORT_CRC_ERR_CNT); - writel(0x0000, port + PORT_HSHK_ERR_CNT); - - /* Always use 64bit activation */ - writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR); - - /* Clear port multiplier enable and resume bits */ - writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR); - } - - /* Turn on interrupts */ - writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL); - - pci_set_master(pdev); - - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - - kfree(probe_ent); - return 0; - - out_free: - if (host_base) - pci_iounmap(pdev, host_base); - if (port_base) - pci_iounmap(pdev, port_base); - kfree(probe_ent); - kfree(hpriv); - pci_release_regions(pdev); - out_disable: - pci_disable_device(pdev); - return rc; -} - -static int __init sil24_init(void) -{ - return pci_module_init(&sil24_pci_driver); -} - -static void __exit sil24_exit(void) -{ - pci_unregister_driver(&sil24_pci_driver); -} - -MODULE_AUTHOR("Tejun Heo"); -MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, sil24_pci_tbl); - -module_init(sil24_init); -module_exit(sil24_exit); diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c deleted file mode 100644 index 809d337ed64..00000000000 --- a/drivers/scsi/sata_sis.c +++ /dev/null @@ -1,348 +0,0 @@ -/* - * sata_sis.c - Silicon Integrated Systems SATA - * - * Maintained by: Uwe Koziolek - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2004 Uwe Koziolek - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available under NDA. - * - */ - -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/blkdev.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <scsi/scsi_host.h> -#include <linux/libata.h> - -#define DRV_NAME "sata_sis" -#define DRV_VERSION "0.6" - -enum { - sis_180 = 0, - SIS_SCR_PCI_BAR = 5, - - /* PCI configuration registers */ - SIS_GENCTL = 0x54, /* IDE General Control register */ - SIS_SCR_BASE = 0xc0, /* sata0 phy SCR registers */ - SIS180_SATA1_OFS = 0x10, /* offset from sata0->sata1 phy regs */ - SIS182_SATA1_OFS = 0x20, /* offset from sata0->sata1 phy regs */ - SIS_PMR = 0x90, /* port mapping register */ - SIS_PMR_COMBINED = 0x30, - - /* random bits */ - SIS_FLAG_CFGSCR = (1 << 30), /* host flag: SCRs via PCI cfg */ - - GENCTL_IOMAPPED_SCR = (1 << 26), /* if set, SCRs are in IO space */ -}; - -static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg); -static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); - -static const struct pci_device_id sis_pci_tbl[] = { - { PCI_VENDOR_ID_SI, 0x180, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 }, - { PCI_VENDOR_ID_SI, 0x181, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 }, - { PCI_VENDOR_ID_SI, 0x182, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 }, - { } /* terminate list */ -}; - - -static struct pci_driver sis_pci_driver = { - .name = DRV_NAME, - .id_table = sis_pci_tbl, - .probe = sis_init_one, - .remove = ata_pci_remove_one, -}; - -static struct scsi_host_template sis_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = ATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - -static const struct ata_port_operations sis_ops = { - .port_disable = ata_port_disable, - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .scr_read = sis_scr_read, - .scr_write = sis_scr_write, - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop, -}; - -static struct ata_port_info sis_port_info = { - .sht = &sis_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, - .mwdma_mask = 0x7, - .udma_mask = 0x7f, - .port_ops = &sis_ops, -}; - - -MODULE_AUTHOR("Uwe Koziolek"); -MODULE_DESCRIPTION("low-level driver for Silicon Integratad Systems SATA controller"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, sis_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg, int device) -{ - unsigned int addr = SIS_SCR_BASE + (4 * sc_reg); - - if (port_no) { - if (device == 0x182) - addr += SIS182_SATA1_OFS; - else - addr += SIS180_SATA1_OFS; - } - - return addr; -} - -static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) -{ - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg, pdev->device); - u32 val, val2 = 0; - u8 pmr; - - if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */ - return 0xffffffff; - - pci_read_config_byte(pdev, SIS_PMR, &pmr); - - pci_read_config_dword(pdev, cfg_addr, &val); - - if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) - pci_read_config_dword(pdev, cfg_addr+0x10, &val2); - - return val|val2; -} - -static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val) -{ - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr, pdev->device); - u8 pmr; - - if (scr == SCR_ERROR) /* doesn't exist in PCI cfg space */ - return; - - pci_read_config_byte(pdev, SIS_PMR, &pmr); - - pci_write_config_dword(pdev, cfg_addr, val); - - if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) - pci_write_config_dword(pdev, cfg_addr+0x10, val); -} - -static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg) -{ - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - u32 val, val2 = 0; - u8 pmr; - - if (sc_reg > SCR_CONTROL) - return 0xffffffffU; - - if (ap->flags & SIS_FLAG_CFGSCR) - return sis_scr_cfg_read(ap, sc_reg); - - pci_read_config_byte(pdev, SIS_PMR, &pmr); - - val = inl(ap->ioaddr.scr_addr + (sc_reg * 4)); - - if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) - val2 = inl(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10); - - return val | val2; -} - -static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) -{ - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - u8 pmr; - - if (sc_reg > SCR_CONTROL) - return; - - pci_read_config_byte(pdev, SIS_PMR, &pmr); - - if (ap->flags & SIS_FLAG_CFGSCR) - sis_scr_cfg_write(ap, sc_reg, val); - else { - outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)); - if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) - outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)+0x10); - } -} - -static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version; - struct ata_probe_ent *probe_ent = NULL; - int rc; - u32 genctl; - struct ata_port_info *ppi; - int pci_dev_busy = 0; - u8 pmr; - u8 port2_start; - - if (!printed_version++) - dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out; - } - - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - ppi = &sis_port_info; - probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); - if (!probe_ent) { - rc = -ENOMEM; - goto err_out_regions; - } - - /* check and see if the SCRs are in IO space or PCI cfg space */ - pci_read_config_dword(pdev, SIS_GENCTL, &genctl); - if ((genctl & GENCTL_IOMAPPED_SCR) == 0) - probe_ent->host_flags |= SIS_FLAG_CFGSCR; - - /* if hardware thinks SCRs are in IO space, but there are - * no IO resources assigned, change to PCI cfg space. - */ - if ((!(probe_ent->host_flags & SIS_FLAG_CFGSCR)) && - ((pci_resource_start(pdev, SIS_SCR_PCI_BAR) == 0) || - (pci_resource_len(pdev, SIS_SCR_PCI_BAR) < 128))) { - genctl &= ~GENCTL_IOMAPPED_SCR; - pci_write_config_dword(pdev, SIS_GENCTL, genctl); - probe_ent->host_flags |= SIS_FLAG_CFGSCR; - } - - pci_read_config_byte(pdev, SIS_PMR, &pmr); - if (ent->device != 0x182) { - if ((pmr & SIS_PMR_COMBINED) == 0) { - dev_printk(KERN_INFO, &pdev->dev, - "Detected SiS 180/181 chipset in SATA mode\n"); - port2_start = 64; - } - else { - dev_printk(KERN_INFO, &pdev->dev, - "Detected SiS 180/181 chipset in combined mode\n"); - port2_start=0; - } - } - else { - dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182 chipset\n"); - port2_start = 0x20; - } - - if (!(probe_ent->host_flags & SIS_FLAG_CFGSCR)) { - probe_ent->port[0].scr_addr = - pci_resource_start(pdev, SIS_SCR_PCI_BAR); - probe_ent->port[1].scr_addr = - pci_resource_start(pdev, SIS_SCR_PCI_BAR) + port2_start; - } - - pci_set_master(pdev); - pci_intx(pdev, 1); - - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - kfree(probe_ent); - - return 0; - -err_out_regions: - pci_release_regions(pdev); - -err_out: - if (!pci_dev_busy) - pci_disable_device(pdev); - return rc; - -} - -static int __init sis_init(void) -{ - return pci_module_init(&sis_pci_driver); -} - -static void __exit sis_exit(void) -{ - pci_unregister_driver(&sis_pci_driver); -} - -module_init(sis_init); -module_exit(sis_exit); - diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c deleted file mode 100644 index c94b870cf37..00000000000 --- a/drivers/scsi/sata_svw.c +++ /dev/null @@ -1,509 +0,0 @@ -/* - * sata_svw.c - ServerWorks / Apple K2 SATA - * - * Maintained by: Benjamin Herrenschmidt <benh@kernel.crashing.org> and - * Jeff Garzik <jgarzik@pobox.com> - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org> - * - * Bits from Jeff Garzik, Copyright RedHat, Inc. - * - * This driver probably works with non-Apple versions of the - * Broadcom chipset... - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available under NDA. - * - */ - -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/blkdev.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <scsi/scsi_host.h> -#include <linux/libata.h> - -#ifdef CONFIG_PPC_OF -#include <asm/prom.h> -#include <asm/pci-bridge.h> -#endif /* CONFIG_PPC_OF */ - -#define DRV_NAME "sata_svw" -#define DRV_VERSION "1.8" - -enum { - /* Taskfile registers offsets */ - K2_SATA_TF_CMD_OFFSET = 0x00, - K2_SATA_TF_DATA_OFFSET = 0x00, - K2_SATA_TF_ERROR_OFFSET = 0x04, - K2_SATA_TF_NSECT_OFFSET = 0x08, - K2_SATA_TF_LBAL_OFFSET = 0x0c, - K2_SATA_TF_LBAM_OFFSET = 0x10, - K2_SATA_TF_LBAH_OFFSET = 0x14, - K2_SATA_TF_DEVICE_OFFSET = 0x18, - K2_SATA_TF_CMDSTAT_OFFSET = 0x1c, - K2_SATA_TF_CTL_OFFSET = 0x20, - - /* DMA base */ - K2_SATA_DMA_CMD_OFFSET = 0x30, - - /* SCRs base */ - K2_SATA_SCR_STATUS_OFFSET = 0x40, - K2_SATA_SCR_ERROR_OFFSET = 0x44, - K2_SATA_SCR_CONTROL_OFFSET = 0x48, - - /* Others */ - K2_SATA_SICR1_OFFSET = 0x80, - K2_SATA_SICR2_OFFSET = 0x84, - K2_SATA_SIM_OFFSET = 0x88, - - /* Port stride */ - K2_SATA_PORT_OFFSET = 0x100, -}; - -static u8 k2_stat_check_status(struct ata_port *ap); - - -static u32 k2_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) -{ - if (sc_reg > SCR_CONTROL) - return 0xffffffffU; - return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4)); -} - - -static void k2_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, - u32 val) -{ - if (sc_reg > SCR_CONTROL) - return; - writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4)); -} - - -static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - if (tf->ctl != ap->last_ctl) { - writeb(tf->ctl, ioaddr->ctl_addr); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); - } - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->feature_addr); - writew(tf->nsect | (((u16)tf->hob_nsect) << 8), ioaddr->nsect_addr); - writew(tf->lbal | (((u16)tf->hob_lbal) << 8), ioaddr->lbal_addr); - writew(tf->lbam | (((u16)tf->hob_lbam) << 8), ioaddr->lbam_addr); - writew(tf->lbah | (((u16)tf->hob_lbah) << 8), ioaddr->lbah_addr); - } else if (is_addr) { - writew(tf->feature, ioaddr->feature_addr); - writew(tf->nsect, ioaddr->nsect_addr); - writew(tf->lbal, ioaddr->lbal_addr); - writew(tf->lbam, ioaddr->lbam_addr); - writew(tf->lbah, ioaddr->lbah_addr); - } - - if (tf->flags & ATA_TFLAG_DEVICE) - writeb(tf->device, ioaddr->device_addr); - - ata_wait_idle(ap); -} - - -static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - u16 nsect, lbal, lbam, lbah, feature; - - tf->command = k2_stat_check_status(ap); - tf->device = readw(ioaddr->device_addr); - feature = readw(ioaddr->error_addr); - nsect = readw(ioaddr->nsect_addr); - lbal = readw(ioaddr->lbal_addr); - lbam = readw(ioaddr->lbam_addr); - lbah = readw(ioaddr->lbah_addr); - - tf->feature = feature; - tf->nsect = nsect; - tf->lbal = lbal; - tf->lbam = lbam; - tf->lbah = lbah; - - if (tf->flags & ATA_TFLAG_LBA48) { - tf->hob_feature = feature >> 8; - tf->hob_nsect = nsect >> 8; - tf->hob_lbal = lbal >> 8; - tf->hob_lbam = lbam >> 8; - tf->hob_lbah = lbah >> 8; - } -} - -/** - * k2_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction (MMIO) - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void k2_bmdma_setup_mmio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); - u8 dmactl; - void *mmio = (void *) ap->ioaddr.bmdma_addr; - /* load PRD table addr. */ - mb(); /* make sure PRD table writes are visible to controller */ - writel(ap->prd_dma, mmio + ATA_DMA_TABLE_OFS); - - /* specify data direction, triple-check start bit is clear */ - dmactl = readb(mmio + ATA_DMA_CMD); - dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); - if (!rw) - dmactl |= ATA_DMA_WR; - writeb(dmactl, mmio + ATA_DMA_CMD); - - /* issue r/w command if this is not a ATA DMA command*/ - if (qc->tf.protocol != ATA_PROT_DMA) - ap->ops->exec_command(ap, &qc->tf); -} - -/** - * k2_bmdma_start_mmio - Start a PCI IDE BMDMA transaction (MMIO) - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void k2_bmdma_start_mmio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - void *mmio = (void *) ap->ioaddr.bmdma_addr; - u8 dmactl; - - /* start host DMA transaction */ - dmactl = readb(mmio + ATA_DMA_CMD); - writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD); - /* There is a race condition in certain SATA controllers that can - be seen when the r/w command is given to the controller before the - host DMA is started. On a Read command, the controller would initiate - the command to the drive even before it sees the DMA start. When there - are very fast drives connected to the controller, or when the data request - hits in the drive cache, there is the possibility that the drive returns a part - or all of the requested data to the controller before the DMA start is issued. - In this case, the controller would become confused as to what to do with the data. - In the worst case when all the data is returned back to the controller, the - controller could hang. In other cases it could return partial data returning - in data corruption. This problem has been seen in PPC systems and can also appear - on an system with very fast disks, where the SATA controller is sitting behind a - number of bridges, and hence there is significant latency between the r/w command - and the start command. */ - /* issue r/w command if the access is to ATA*/ - if (qc->tf.protocol == ATA_PROT_DMA) - ap->ops->exec_command(ap, &qc->tf); -} - - -static u8 k2_stat_check_status(struct ata_port *ap) -{ - return readl((void *) ap->ioaddr.status_addr); -} - -#ifdef CONFIG_PPC_OF -/* - * k2_sata_proc_info - * inout : decides on the direction of the dataflow and the meaning of the - * variables - * buffer: If inout==FALSE data is being written to it else read from it - * *start: If inout==FALSE start of the valid data in the buffer - * offset: If inout==FALSE offset from the beginning of the imaginary file - * from which we start writing into the buffer - * length: If inout==FALSE max number of bytes to be written into the buffer - * else number of bytes in the buffer - */ -static int k2_sata_proc_info(struct Scsi_Host *shost, char *page, char **start, - off_t offset, int count, int inout) -{ - struct ata_port *ap; - struct device_node *np; - int len, index; - - /* Find the ata_port */ - ap = ata_shost_to_port(shost); - if (ap == NULL) - return 0; - - /* Find the OF node for the PCI device proper */ - np = pci_device_to_OF_node(to_pci_dev(ap->host_set->dev)); - if (np == NULL) - return 0; - - /* Match it to a port node */ - index = (ap == ap->host_set->ports[0]) ? 0 : 1; - for (np = np->child; np != NULL; np = np->sibling) { - u32 *reg = (u32 *)get_property(np, "reg", NULL); - if (!reg) - continue; - if (index == *reg) - break; - } - if (np == NULL) - return 0; - - len = sprintf(page, "devspec: %s\n", np->full_name); - - return len; -} -#endif /* CONFIG_PPC_OF */ - - -static struct scsi_host_template k2_sata_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, -#ifdef CONFIG_PPC_OF - .proc_info = k2_sata_proc_info, -#endif - .bios_param = ata_std_bios_param, -}; - - -static const struct ata_port_operations k2_sata_ops = { - .port_disable = ata_port_disable, - .tf_load = k2_sata_tf_load, - .tf_read = k2_sata_tf_read, - .check_status = k2_stat_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - .bmdma_setup = k2_bmdma_setup_mmio, - .bmdma_start = k2_bmdma_start_mmio, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_mmio_data_xfer, - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .scr_read = k2_sata_scr_read, - .scr_write = k2_sata_scr_write, - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_pci_host_stop, -}; - -static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base) -{ - port->cmd_addr = base + K2_SATA_TF_CMD_OFFSET; - port->data_addr = base + K2_SATA_TF_DATA_OFFSET; - port->feature_addr = - port->error_addr = base + K2_SATA_TF_ERROR_OFFSET; - port->nsect_addr = base + K2_SATA_TF_NSECT_OFFSET; - port->lbal_addr = base + K2_SATA_TF_LBAL_OFFSET; - port->lbam_addr = base + K2_SATA_TF_LBAM_OFFSET; - port->lbah_addr = base + K2_SATA_TF_LBAH_OFFSET; - port->device_addr = base + K2_SATA_TF_DEVICE_OFFSET; - port->command_addr = - port->status_addr = base + K2_SATA_TF_CMDSTAT_OFFSET; - port->altstatus_addr = - port->ctl_addr = base + K2_SATA_TF_CTL_OFFSET; - port->bmdma_addr = base + K2_SATA_DMA_CMD_OFFSET; - port->scr_addr = base + K2_SATA_SCR_STATUS_OFFSET; -} - - -static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version; - struct ata_probe_ent *probe_ent = NULL; - unsigned long base; - void __iomem *mmio_base; - int pci_dev_busy = 0; - int rc; - int i; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - - /* - * If this driver happens to only be useful on Apple's K2, then - * we should check that here as it has a normal Serverworks ID - */ - rc = pci_enable_device(pdev); - if (rc) - return rc; - /* - * Check if we have resources mapped at all (second function may - * have been disabled by firmware) - */ - if (pci_resource_len(pdev, 5) == 0) - return -ENODEV; - - /* Request PCI regions */ - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out; - } - - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) { - rc = -ENOMEM; - goto err_out_regions; - } - - memset(probe_ent, 0, sizeof(*probe_ent)); - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - mmio_base = pci_iomap(pdev, 5, 0); - if (mmio_base == NULL) { - rc = -ENOMEM; - goto err_out_free_ent; - } - base = (unsigned long) mmio_base; - - /* Clear a magic bit in SCR1 according to Darwin, those help - * some funky seagate drives (though so far, those were already - * set by the firmware on the machines I had access to) - */ - writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000, - mmio_base + K2_SATA_SICR1_OFFSET); - - /* Clear SATA error & interrupts we don't use */ - writel(0xffffffff, mmio_base + K2_SATA_SCR_ERROR_OFFSET); - writel(0x0, mmio_base + K2_SATA_SIM_OFFSET); - - probe_ent->sht = &k2_sata_sht; - probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO; - probe_ent->port_ops = &k2_sata_ops; - probe_ent->n_ports = 4; - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = SA_SHIRQ; - probe_ent->mmio_base = mmio_base; - - /* We don't care much about the PIO/UDMA masks, but the core won't like us - * if we don't fill these - */ - probe_ent->pio_mask = 0x1f; - probe_ent->mwdma_mask = 0x7; - probe_ent->udma_mask = 0x7f; - - /* different controllers have different number of ports - currently 4 or 8 */ - /* All ports are on the same function. Multi-function device is no - * longer available. This should not be seen in any system. */ - for (i = 0; i < ent->driver_data; i++) - k2_sata_setup_port(&probe_ent->port[i], base + i * K2_SATA_PORT_OFFSET); - - pci_set_master(pdev); - - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - kfree(probe_ent); - - return 0; - -err_out_free_ent: - kfree(probe_ent); -err_out_regions: - pci_release_regions(pdev); -err_out: - if (!pci_dev_busy) - pci_disable_device(pdev); - return rc; -} - -/* 0x240 is device ID for Apple K2 device - * 0x241 is device ID for Serverworks Frodo4 - * 0x242 is device ID for Serverworks Frodo8 - * 0x24a is device ID for BCM5785 (aka HT1000) HT southbridge integrated SATA - * controller - * */ -static const struct pci_device_id k2_sata_pci_tbl[] = { - { 0x1166, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, - { 0x1166, 0x0241, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, - { 0x1166, 0x0242, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, - { 0x1166, 0x024a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, - { 0x1166, 0x024b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, - { } -}; - - -static struct pci_driver k2_sata_pci_driver = { - .name = DRV_NAME, - .id_table = k2_sata_pci_tbl, - .probe = k2_sata_init_one, - .remove = ata_pci_remove_one, -}; - - -static int __init k2_sata_init(void) -{ - return pci_module_init(&k2_sata_pci_driver); -} - - -static void __exit k2_sata_exit(void) -{ - pci_unregister_driver(&k2_sata_pci_driver); -} - - -MODULE_AUTHOR("Benjamin Herrenschmidt"); -MODULE_DESCRIPTION("low-level driver for K2 SATA controller"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, k2_sata_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -module_init(k2_sata_init); -module_exit(k2_sata_exit); diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c deleted file mode 100644 index 7f864410f7c..00000000000 --- a/drivers/scsi/sata_sx4.c +++ /dev/null @@ -1,1502 +0,0 @@ -/* - * sata_sx4.c - Promise SATA - * - * Maintained by: Jeff Garzik <jgarzik@pobox.com> - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2003-2004 Red Hat, Inc. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available under NDA. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/blkdev.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/sched.h> -#include <linux/device.h> -#include <scsi/scsi_host.h> -#include <scsi/scsi_cmnd.h> -#include <linux/libata.h> -#include <asm/io.h> -#include "sata_promise.h" - -#define DRV_NAME "sata_sx4" -#define DRV_VERSION "0.9" - - -enum { - PDC_PRD_TBL = 0x44, /* Direct command DMA table addr */ - - PDC_PKT_SUBMIT = 0x40, /* Command packet pointer addr */ - PDC_HDMA_PKT_SUBMIT = 0x100, /* Host DMA packet pointer addr */ - PDC_INT_SEQMASK = 0x40, /* Mask of asserted SEQ INTs */ - PDC_HDMA_CTLSTAT = 0x12C, /* Host DMA control / status */ - - PDC_20621_SEQCTL = 0x400, - PDC_20621_SEQMASK = 0x480, - PDC_20621_GENERAL_CTL = 0x484, - PDC_20621_PAGE_SIZE = (32 * 1024), - - /* chosen, not constant, values; we design our own DIMM mem map */ - PDC_20621_DIMM_WINDOW = 0x0C, /* page# for 32K DIMM window */ - PDC_20621_DIMM_BASE = 0x00200000, - PDC_20621_DIMM_DATA = (64 * 1024), - PDC_DIMM_DATA_STEP = (256 * 1024), - PDC_DIMM_WINDOW_STEP = (8 * 1024), - PDC_DIMM_HOST_PRD = (6 * 1024), - PDC_DIMM_HOST_PKT = (128 * 0), - PDC_DIMM_HPKT_PRD = (128 * 1), - PDC_DIMM_ATA_PKT = (128 * 2), - PDC_DIMM_APKT_PRD = (128 * 3), - PDC_DIMM_HEADER_SZ = PDC_DIMM_APKT_PRD + 128, - PDC_PAGE_WINDOW = 0x40, - PDC_PAGE_DATA = PDC_PAGE_WINDOW + - (PDC_20621_DIMM_DATA / PDC_20621_PAGE_SIZE), - PDC_PAGE_SET = PDC_DIMM_DATA_STEP / PDC_20621_PAGE_SIZE, - - PDC_CHIP0_OFS = 0xC0000, /* offset of chip #0 */ - - PDC_20621_ERR_MASK = (1<<19) | (1<<20) | (1<<21) | (1<<22) | - (1<<23), - - board_20621 = 0, /* FastTrak S150 SX4 */ - - PDC_RESET = (1 << 11), /* HDMA reset */ - - PDC_MAX_HDMA = 32, - PDC_HDMA_Q_MASK = (PDC_MAX_HDMA - 1), - - PDC_DIMM0_SPD_DEV_ADDRESS = 0x50, - PDC_DIMM1_SPD_DEV_ADDRESS = 0x51, - PDC_MAX_DIMM_MODULE = 0x02, - PDC_I2C_CONTROL_OFFSET = 0x48, - PDC_I2C_ADDR_DATA_OFFSET = 0x4C, - PDC_DIMM0_CONTROL_OFFSET = 0x80, - PDC_DIMM1_CONTROL_OFFSET = 0x84, - PDC_SDRAM_CONTROL_OFFSET = 0x88, - PDC_I2C_WRITE = 0x00000000, - PDC_I2C_READ = 0x00000040, - PDC_I2C_START = 0x00000080, - PDC_I2C_MASK_INT = 0x00000020, - PDC_I2C_COMPLETE = 0x00010000, - PDC_I2C_NO_ACK = 0x00100000, - PDC_DIMM_SPD_SUBADDRESS_START = 0x00, - PDC_DIMM_SPD_SUBADDRESS_END = 0x7F, - PDC_DIMM_SPD_ROW_NUM = 3, - PDC_DIMM_SPD_COLUMN_NUM = 4, - PDC_DIMM_SPD_MODULE_ROW = 5, - PDC_DIMM_SPD_TYPE = 11, - PDC_DIMM_SPD_FRESH_RATE = 12, - PDC_DIMM_SPD_BANK_NUM = 17, - PDC_DIMM_SPD_CAS_LATENCY = 18, - PDC_DIMM_SPD_ATTRIBUTE = 21, - PDC_DIMM_SPD_ROW_PRE_CHARGE = 27, - PDC_DIMM_SPD_ROW_ACTIVE_DELAY = 28, - PDC_DIMM_SPD_RAS_CAS_DELAY = 29, - PDC_DIMM_SPD_ACTIVE_PRECHARGE = 30, - PDC_DIMM_SPD_SYSTEM_FREQ = 126, - PDC_CTL_STATUS = 0x08, - PDC_DIMM_WINDOW_CTLR = 0x0C, - PDC_TIME_CONTROL = 0x3C, - PDC_TIME_PERIOD = 0x40, - PDC_TIME_COUNTER = 0x44, - PDC_GENERAL_CTLR = 0x484, - PCI_PLL_INIT = 0x8A531824, - PCI_X_TCOUNT = 0xEE1E5CFF -}; - - -struct pdc_port_priv { - u8 dimm_buf[(ATA_PRD_SZ * ATA_MAX_PRD) + 512]; - u8 *pkt; - dma_addr_t pkt_dma; -}; - -struct pdc_host_priv { - void __iomem *dimm_mmio; - - unsigned int doing_hdma; - unsigned int hdma_prod; - unsigned int hdma_cons; - struct { - struct ata_queued_cmd *qc; - unsigned int seq; - unsigned long pkt_ofs; - } hdma[32]; -}; - - -static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_regs *regs); -static void pdc_eng_timeout(struct ata_port *ap); -static void pdc_20621_phy_reset (struct ata_port *ap); -static int pdc_port_start(struct ata_port *ap); -static void pdc_port_stop(struct ata_port *ap); -static void pdc20621_qc_prep(struct ata_queued_cmd *qc); -static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); -static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); -static void pdc20621_host_stop(struct ata_host_set *host_set); -static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe); -static int pdc20621_detect_dimm(struct ata_probe_ent *pe); -static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, - u32 device, u32 subaddr, u32 *pdata); -static int pdc20621_prog_dimm0(struct ata_probe_ent *pe); -static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe); -#ifdef ATA_VERBOSE_DEBUG -static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, - void *psource, u32 offset, u32 size); -#endif -static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, - void *psource, u32 offset, u32 size); -static void pdc20621_irq_clear(struct ata_port *ap); -static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc); - - -static struct scsi_host_template pdc_sata_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - -static const struct ata_port_operations pdc_20621_ops = { - .port_disable = ata_port_disable, - .tf_load = pdc_tf_load_mmio, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = pdc_exec_command_mmio, - .dev_select = ata_std_dev_select, - .phy_reset = pdc_20621_phy_reset, - .qc_prep = pdc20621_qc_prep, - .qc_issue = pdc20621_qc_issue_prot, - .data_xfer = ata_mmio_data_xfer, - .eng_timeout = pdc_eng_timeout, - .irq_handler = pdc20621_interrupt, - .irq_clear = pdc20621_irq_clear, - .port_start = pdc_port_start, - .port_stop = pdc_port_stop, - .host_stop = pdc20621_host_stop, -}; - -static const struct ata_port_info pdc_port_info[] = { - /* board_20621 */ - { - .sht = &pdc_sata_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SRST | ATA_FLAG_MMIO | - ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 ; FIXME */ - .port_ops = &pdc_20621_ops, - }, - -}; - -static const struct pci_device_id pdc_sata_pci_tbl[] = { - { PCI_VENDOR_ID_PROMISE, 0x6622, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - board_20621 }, - { } /* terminate list */ -}; - - -static struct pci_driver pdc_sata_pci_driver = { - .name = DRV_NAME, - .id_table = pdc_sata_pci_tbl, - .probe = pdc_sata_init_one, - .remove = ata_pci_remove_one, -}; - - -static void pdc20621_host_stop(struct ata_host_set *host_set) -{ - struct pci_dev *pdev = to_pci_dev(host_set->dev); - struct pdc_host_priv *hpriv = host_set->private_data; - void __iomem *dimm_mmio = hpriv->dimm_mmio; - - pci_iounmap(pdev, dimm_mmio); - kfree(hpriv); - - pci_iounmap(pdev, host_set->mmio_base); -} - -static int pdc_port_start(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct pdc_port_priv *pp; - int rc; - - rc = ata_port_start(ap); - if (rc) - return rc; - - pp = kmalloc(sizeof(*pp), GFP_KERNEL); - if (!pp) { - rc = -ENOMEM; - goto err_out; - } - memset(pp, 0, sizeof(*pp)); - - pp->pkt = dma_alloc_coherent(dev, 128, &pp->pkt_dma, GFP_KERNEL); - if (!pp->pkt) { - rc = -ENOMEM; - goto err_out_kfree; - } - - ap->private_data = pp; - - return 0; - -err_out_kfree: - kfree(pp); -err_out: - ata_port_stop(ap); - return rc; -} - - -static void pdc_port_stop(struct ata_port *ap) -{ - struct device *dev = ap->host_set->dev; - struct pdc_port_priv *pp = ap->private_data; - - ap->private_data = NULL; - dma_free_coherent(dev, 128, pp->pkt, pp->pkt_dma); - kfree(pp); - ata_port_stop(ap); -} - - -static void pdc_20621_phy_reset (struct ata_port *ap) -{ - VPRINTK("ENTER\n"); - ap->cbl = ATA_CBL_SATA; - ata_port_probe(ap); - ata_bus_reset(ap); -} - -static inline void pdc20621_ata_sg(struct ata_taskfile *tf, u8 *buf, - unsigned int portno, - unsigned int total_len) -{ - u32 addr; - unsigned int dw = PDC_DIMM_APKT_PRD >> 2; - u32 *buf32 = (u32 *) buf; - - /* output ATA packet S/G table */ - addr = PDC_20621_DIMM_BASE + PDC_20621_DIMM_DATA + - (PDC_DIMM_DATA_STEP * portno); - VPRINTK("ATA sg addr 0x%x, %d\n", addr, addr); - buf32[dw] = cpu_to_le32(addr); - buf32[dw + 1] = cpu_to_le32(total_len | ATA_PRD_EOT); - - VPRINTK("ATA PSG @ %x == (0x%x, 0x%x)\n", - PDC_20621_DIMM_BASE + - (PDC_DIMM_WINDOW_STEP * portno) + - PDC_DIMM_APKT_PRD, - buf32[dw], buf32[dw + 1]); -} - -static inline void pdc20621_host_sg(struct ata_taskfile *tf, u8 *buf, - unsigned int portno, - unsigned int total_len) -{ - u32 addr; - unsigned int dw = PDC_DIMM_HPKT_PRD >> 2; - u32 *buf32 = (u32 *) buf; - - /* output Host DMA packet S/G table */ - addr = PDC_20621_DIMM_BASE + PDC_20621_DIMM_DATA + - (PDC_DIMM_DATA_STEP * portno); - - buf32[dw] = cpu_to_le32(addr); - buf32[dw + 1] = cpu_to_le32(total_len | ATA_PRD_EOT); - - VPRINTK("HOST PSG @ %x == (0x%x, 0x%x)\n", - PDC_20621_DIMM_BASE + - (PDC_DIMM_WINDOW_STEP * portno) + - PDC_DIMM_HPKT_PRD, - buf32[dw], buf32[dw + 1]); -} - -static inline unsigned int pdc20621_ata_pkt(struct ata_taskfile *tf, - unsigned int devno, u8 *buf, - unsigned int portno) -{ - unsigned int i, dw; - u32 *buf32 = (u32 *) buf; - u8 dev_reg; - - unsigned int dimm_sg = PDC_20621_DIMM_BASE + - (PDC_DIMM_WINDOW_STEP * portno) + - PDC_DIMM_APKT_PRD; - VPRINTK("ENTER, dimm_sg == 0x%x, %d\n", dimm_sg, dimm_sg); - - i = PDC_DIMM_ATA_PKT; - - /* - * Set up ATA packet - */ - if ((tf->protocol == ATA_PROT_DMA) && (!(tf->flags & ATA_TFLAG_WRITE))) - buf[i++] = PDC_PKT_READ; - else if (tf->protocol == ATA_PROT_NODATA) - buf[i++] = PDC_PKT_NODATA; - else - buf[i++] = 0; - buf[i++] = 0; /* reserved */ - buf[i++] = portno + 1; /* seq. id */ - buf[i++] = 0xff; /* delay seq. id */ - - /* dimm dma S/G, and next-pkt */ - dw = i >> 2; - if (tf->protocol == ATA_PROT_NODATA) - buf32[dw] = 0; - else - buf32[dw] = cpu_to_le32(dimm_sg); - buf32[dw + 1] = 0; - i += 8; - - if (devno == 0) - dev_reg = ATA_DEVICE_OBS; - else - dev_reg = ATA_DEVICE_OBS | ATA_DEV1; - - /* select device */ - buf[i++] = (1 << 5) | PDC_PKT_CLEAR_BSY | ATA_REG_DEVICE; - buf[i++] = dev_reg; - - /* device control register */ - buf[i++] = (1 << 5) | PDC_REG_DEVCTL; - buf[i++] = tf->ctl; - - return i; -} - -static inline void pdc20621_host_pkt(struct ata_taskfile *tf, u8 *buf, - unsigned int portno) -{ - unsigned int dw; - u32 tmp, *buf32 = (u32 *) buf; - - unsigned int host_sg = PDC_20621_DIMM_BASE + - (PDC_DIMM_WINDOW_STEP * portno) + - PDC_DIMM_HOST_PRD; - unsigned int dimm_sg = PDC_20621_DIMM_BASE + - (PDC_DIMM_WINDOW_STEP * portno) + - PDC_DIMM_HPKT_PRD; - VPRINTK("ENTER, dimm_sg == 0x%x, %d\n", dimm_sg, dimm_sg); - VPRINTK("host_sg == 0x%x, %d\n", host_sg, host_sg); - - dw = PDC_DIMM_HOST_PKT >> 2; - - /* - * Set up Host DMA packet - */ - if ((tf->protocol == ATA_PROT_DMA) && (!(tf->flags & ATA_TFLAG_WRITE))) - tmp = PDC_PKT_READ; - else - tmp = 0; - tmp |= ((portno + 1 + 4) << 16); /* seq. id */ - tmp |= (0xff << 24); /* delay seq. id */ - buf32[dw + 0] = cpu_to_le32(tmp); - buf32[dw + 1] = cpu_to_le32(host_sg); - buf32[dw + 2] = cpu_to_le32(dimm_sg); - buf32[dw + 3] = 0; - - VPRINTK("HOST PKT @ %x == (0x%x 0x%x 0x%x 0x%x)\n", - PDC_20621_DIMM_BASE + (PDC_DIMM_WINDOW_STEP * portno) + - PDC_DIMM_HOST_PKT, - buf32[dw + 0], - buf32[dw + 1], - buf32[dw + 2], - buf32[dw + 3]); -} - -static void pdc20621_dma_prep(struct ata_queued_cmd *qc) -{ - struct scatterlist *sg; - struct ata_port *ap = qc->ap; - struct pdc_port_priv *pp = ap->private_data; - void __iomem *mmio = ap->host_set->mmio_base; - struct pdc_host_priv *hpriv = ap->host_set->private_data; - void __iomem *dimm_mmio = hpriv->dimm_mmio; - unsigned int portno = ap->port_no; - unsigned int i, idx, total_len = 0, sgt_len; - u32 *buf = (u32 *) &pp->dimm_buf[PDC_DIMM_HEADER_SZ]; - - WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); - - VPRINTK("ata%u: ENTER\n", ap->id); - - /* hard-code chip #0 */ - mmio += PDC_CHIP0_OFS; - - /* - * Build S/G table - */ - idx = 0; - ata_for_each_sg(sg, qc) { - buf[idx++] = cpu_to_le32(sg_dma_address(sg)); - buf[idx++] = cpu_to_le32(sg_dma_len(sg)); - total_len += sg_dma_len(sg); - } - buf[idx - 1] |= cpu_to_le32(ATA_PRD_EOT); - sgt_len = idx * 4; - - /* - * Build ATA, host DMA packets - */ - pdc20621_host_sg(&qc->tf, &pp->dimm_buf[0], portno, total_len); - pdc20621_host_pkt(&qc->tf, &pp->dimm_buf[0], portno); - - pdc20621_ata_sg(&qc->tf, &pp->dimm_buf[0], portno, total_len); - i = pdc20621_ata_pkt(&qc->tf, qc->dev->devno, &pp->dimm_buf[0], portno); - - if (qc->tf.flags & ATA_TFLAG_LBA48) - i = pdc_prep_lba48(&qc->tf, &pp->dimm_buf[0], i); - else - i = pdc_prep_lba28(&qc->tf, &pp->dimm_buf[0], i); - - pdc_pkt_footer(&qc->tf, &pp->dimm_buf[0], i); - - /* copy three S/G tables and two packets to DIMM MMIO window */ - memcpy_toio(dimm_mmio + (portno * PDC_DIMM_WINDOW_STEP), - &pp->dimm_buf, PDC_DIMM_HEADER_SZ); - memcpy_toio(dimm_mmio + (portno * PDC_DIMM_WINDOW_STEP) + - PDC_DIMM_HOST_PRD, - &pp->dimm_buf[PDC_DIMM_HEADER_SZ], sgt_len); - - /* force host FIFO dump */ - writel(0x00000001, mmio + PDC_20621_GENERAL_CTL); - - readl(dimm_mmio); /* MMIO PCI posting flush */ - - VPRINTK("ata pkt buf ofs %u, prd size %u, mmio copied\n", i, sgt_len); -} - -static void pdc20621_nodata_prep(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct pdc_port_priv *pp = ap->private_data; - void __iomem *mmio = ap->host_set->mmio_base; - struct pdc_host_priv *hpriv = ap->host_set->private_data; - void __iomem *dimm_mmio = hpriv->dimm_mmio; - unsigned int portno = ap->port_no; - unsigned int i; - - VPRINTK("ata%u: ENTER\n", ap->id); - - /* hard-code chip #0 */ - mmio += PDC_CHIP0_OFS; - - i = pdc20621_ata_pkt(&qc->tf, qc->dev->devno, &pp->dimm_buf[0], portno); - - if (qc->tf.flags & ATA_TFLAG_LBA48) - i = pdc_prep_lba48(&qc->tf, &pp->dimm_buf[0], i); - else - i = pdc_prep_lba28(&qc->tf, &pp->dimm_buf[0], i); - - pdc_pkt_footer(&qc->tf, &pp->dimm_buf[0], i); - - /* copy three S/G tables and two packets to DIMM MMIO window */ - memcpy_toio(dimm_mmio + (portno * PDC_DIMM_WINDOW_STEP), - &pp->dimm_buf, PDC_DIMM_HEADER_SZ); - - /* force host FIFO dump */ - writel(0x00000001, mmio + PDC_20621_GENERAL_CTL); - - readl(dimm_mmio); /* MMIO PCI posting flush */ - - VPRINTK("ata pkt buf ofs %u, mmio copied\n", i); -} - -static void pdc20621_qc_prep(struct ata_queued_cmd *qc) -{ - switch (qc->tf.protocol) { - case ATA_PROT_DMA: - pdc20621_dma_prep(qc); - break; - case ATA_PROT_NODATA: - pdc20621_nodata_prep(qc); - break; - default: - break; - } -} - -static void __pdc20621_push_hdma(struct ata_queued_cmd *qc, - unsigned int seq, - u32 pkt_ofs) -{ - struct ata_port *ap = qc->ap; - struct ata_host_set *host_set = ap->host_set; - void __iomem *mmio = host_set->mmio_base; - - /* hard-code chip #0 */ - mmio += PDC_CHIP0_OFS; - - writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4)); - readl(mmio + PDC_20621_SEQCTL + (seq * 4)); /* flush */ - - writel(pkt_ofs, mmio + PDC_HDMA_PKT_SUBMIT); - readl(mmio + PDC_HDMA_PKT_SUBMIT); /* flush */ -} - -static void pdc20621_push_hdma(struct ata_queued_cmd *qc, - unsigned int seq, - u32 pkt_ofs) -{ - struct ata_port *ap = qc->ap; - struct pdc_host_priv *pp = ap->host_set->private_data; - unsigned int idx = pp->hdma_prod & PDC_HDMA_Q_MASK; - - if (!pp->doing_hdma) { - __pdc20621_push_hdma(qc, seq, pkt_ofs); - pp->doing_hdma = 1; - return; - } - - pp->hdma[idx].qc = qc; - pp->hdma[idx].seq = seq; - pp->hdma[idx].pkt_ofs = pkt_ofs; - pp->hdma_prod++; -} - -static void pdc20621_pop_hdma(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct pdc_host_priv *pp = ap->host_set->private_data; - unsigned int idx = pp->hdma_cons & PDC_HDMA_Q_MASK; - - /* if nothing on queue, we're done */ - if (pp->hdma_prod == pp->hdma_cons) { - pp->doing_hdma = 0; - return; - } - - __pdc20621_push_hdma(pp->hdma[idx].qc, pp->hdma[idx].seq, - pp->hdma[idx].pkt_ofs); - pp->hdma_cons++; -} - -#ifdef ATA_VERBOSE_DEBUG -static void pdc20621_dump_hdma(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int port_no = ap->port_no; - struct pdc_host_priv *hpriv = ap->host_set->private_data; - void *dimm_mmio = hpriv->dimm_mmio; - - dimm_mmio += (port_no * PDC_DIMM_WINDOW_STEP); - dimm_mmio += PDC_DIMM_HOST_PKT; - - printk(KERN_ERR "HDMA[0] == 0x%08X\n", readl(dimm_mmio)); - printk(KERN_ERR "HDMA[1] == 0x%08X\n", readl(dimm_mmio + 4)); - printk(KERN_ERR "HDMA[2] == 0x%08X\n", readl(dimm_mmio + 8)); - printk(KERN_ERR "HDMA[3] == 0x%08X\n", readl(dimm_mmio + 12)); -} -#else -static inline void pdc20621_dump_hdma(struct ata_queued_cmd *qc) { } -#endif /* ATA_VERBOSE_DEBUG */ - -static void pdc20621_packet_start(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct ata_host_set *host_set = ap->host_set; - unsigned int port_no = ap->port_no; - void __iomem *mmio = host_set->mmio_base; - unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); - u8 seq = (u8) (port_no + 1); - unsigned int port_ofs; - - /* hard-code chip #0 */ - mmio += PDC_CHIP0_OFS; - - VPRINTK("ata%u: ENTER\n", ap->id); - - wmb(); /* flush PRD, pkt writes */ - - port_ofs = PDC_20621_DIMM_BASE + (PDC_DIMM_WINDOW_STEP * port_no); - - /* if writing, we (1) DMA to DIMM, then (2) do ATA command */ - if (rw && qc->tf.protocol == ATA_PROT_DMA) { - seq += 4; - - pdc20621_dump_hdma(qc); - pdc20621_push_hdma(qc, seq, port_ofs + PDC_DIMM_HOST_PKT); - VPRINTK("queued ofs 0x%x (%u), seq %u\n", - port_ofs + PDC_DIMM_HOST_PKT, - port_ofs + PDC_DIMM_HOST_PKT, - seq); - } else { - writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4)); - readl(mmio + PDC_20621_SEQCTL + (seq * 4)); /* flush */ - - writel(port_ofs + PDC_DIMM_ATA_PKT, - (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); - readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); - VPRINTK("submitted ofs 0x%x (%u), seq %u\n", - port_ofs + PDC_DIMM_ATA_PKT, - port_ofs + PDC_DIMM_ATA_PKT, - seq); - } -} - -static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc) -{ - switch (qc->tf.protocol) { - case ATA_PROT_DMA: - case ATA_PROT_NODATA: - pdc20621_packet_start(qc); - return 0; - - case ATA_PROT_ATAPI_DMA: - BUG(); - break; - - default: - break; - } - - return ata_qc_issue_prot(qc); -} - -static inline unsigned int pdc20621_host_intr( struct ata_port *ap, - struct ata_queued_cmd *qc, - unsigned int doing_hdma, - void __iomem *mmio) -{ - unsigned int port_no = ap->port_no; - unsigned int port_ofs = - PDC_20621_DIMM_BASE + (PDC_DIMM_WINDOW_STEP * port_no); - u8 status; - unsigned int handled = 0; - - VPRINTK("ENTER\n"); - - if ((qc->tf.protocol == ATA_PROT_DMA) && /* read */ - (!(qc->tf.flags & ATA_TFLAG_WRITE))) { - - /* step two - DMA from DIMM to host */ - if (doing_hdma) { - VPRINTK("ata%u: read hdma, 0x%x 0x%x\n", ap->id, - readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT)); - /* get drive status; clear intr; complete txn */ - qc->err_mask |= ac_err_mask(ata_wait_idle(ap)); - ata_qc_complete(qc); - pdc20621_pop_hdma(qc); - } - - /* step one - exec ATA command */ - else { - u8 seq = (u8) (port_no + 1 + 4); - VPRINTK("ata%u: read ata, 0x%x 0x%x\n", ap->id, - readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT)); - - /* submit hdma pkt */ - pdc20621_dump_hdma(qc); - pdc20621_push_hdma(qc, seq, - port_ofs + PDC_DIMM_HOST_PKT); - } - handled = 1; - - } else if (qc->tf.protocol == ATA_PROT_DMA) { /* write */ - - /* step one - DMA from host to DIMM */ - if (doing_hdma) { - u8 seq = (u8) (port_no + 1); - VPRINTK("ata%u: write hdma, 0x%x 0x%x\n", ap->id, - readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT)); - - /* submit ata pkt */ - writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4)); - readl(mmio + PDC_20621_SEQCTL + (seq * 4)); - writel(port_ofs + PDC_DIMM_ATA_PKT, - (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); - readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); - } - - /* step two - execute ATA command */ - else { - VPRINTK("ata%u: write ata, 0x%x 0x%x\n", ap->id, - readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT)); - /* get drive status; clear intr; complete txn */ - qc->err_mask |= ac_err_mask(ata_wait_idle(ap)); - ata_qc_complete(qc); - pdc20621_pop_hdma(qc); - } - handled = 1; - - /* command completion, but no data xfer */ - } else if (qc->tf.protocol == ATA_PROT_NODATA) { - - status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); - DPRINTK("BUS_NODATA (drv_stat 0x%X)\n", status); - qc->err_mask |= ac_err_mask(status); - ata_qc_complete(qc); - handled = 1; - - } else { - ap->stats.idle_irq++; - } - - return handled; -} - -static void pdc20621_irq_clear(struct ata_port *ap) -{ - struct ata_host_set *host_set = ap->host_set; - void __iomem *mmio = host_set->mmio_base; - - mmio += PDC_CHIP0_OFS; - - readl(mmio + PDC_20621_SEQMASK); -} - -static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - struct ata_port *ap; - u32 mask = 0; - unsigned int i, tmp, port_no; - unsigned int handled = 0; - void __iomem *mmio_base; - - VPRINTK("ENTER\n"); - - if (!host_set || !host_set->mmio_base) { - VPRINTK("QUICK EXIT\n"); - return IRQ_NONE; - } - - mmio_base = host_set->mmio_base; - - /* reading should also clear interrupts */ - mmio_base += PDC_CHIP0_OFS; - mask = readl(mmio_base + PDC_20621_SEQMASK); - VPRINTK("mask == 0x%x\n", mask); - - if (mask == 0xffffffff) { - VPRINTK("QUICK EXIT 2\n"); - return IRQ_NONE; - } - mask &= 0xffff; /* only 16 tags possible */ - if (!mask) { - VPRINTK("QUICK EXIT 3\n"); - return IRQ_NONE; - } - - spin_lock(&host_set->lock); - - for (i = 1; i < 9; i++) { - port_no = i - 1; - if (port_no > 3) - port_no -= 4; - if (port_no >= host_set->n_ports) - ap = NULL; - else - ap = host_set->ports[port_no]; - tmp = mask & (1 << i); - VPRINTK("seq %u, port_no %u, ap %p, tmp %x\n", i, port_no, ap, tmp); - if (tmp && ap && - !(ap->flags & ATA_FLAG_DISABLED)) { - struct ata_queued_cmd *qc; - - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) - handled += pdc20621_host_intr(ap, qc, (i > 4), - mmio_base); - } - } - - spin_unlock(&host_set->lock); - - VPRINTK("mask == 0x%x\n", mask); - - VPRINTK("EXIT\n"); - - return IRQ_RETVAL(handled); -} - -static void pdc_eng_timeout(struct ata_port *ap) -{ - u8 drv_stat; - struct ata_host_set *host_set = ap->host_set; - struct ata_queued_cmd *qc; - unsigned long flags; - - DPRINTK("ENTER\n"); - - spin_lock_irqsave(&host_set->lock, flags); - - qc = ata_qc_from_tag(ap, ap->active_tag); - - switch (qc->tf.protocol) { - case ATA_PROT_DMA: - case ATA_PROT_NODATA: - ata_port_printk(ap, KERN_ERR, "command timeout\n"); - qc->err_mask |= __ac_err_mask(ata_wait_idle(ap)); - break; - - default: - drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); - - ata_port_printk(ap, KERN_ERR, - "unknown timeout, cmd 0x%x stat 0x%x\n", - qc->tf.command, drv_stat); - - qc->err_mask |= ac_err_mask(drv_stat); - break; - } - - spin_unlock_irqrestore(&host_set->lock, flags); - ata_eh_qc_complete(qc); - DPRINTK("EXIT\n"); -} - -static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - WARN_ON (tf->protocol == ATA_PROT_DMA || - tf->protocol == ATA_PROT_NODATA); - ata_tf_load(ap, tf); -} - - -static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - WARN_ON (tf->protocol == ATA_PROT_DMA || - tf->protocol == ATA_PROT_NODATA); - ata_exec_command(ap, tf); -} - - -static void pdc_sata_setup_port(struct ata_ioports *port, unsigned long base) -{ - port->cmd_addr = base; - port->data_addr = base; - port->feature_addr = - port->error_addr = base + 0x4; - port->nsect_addr = base + 0x8; - port->lbal_addr = base + 0xc; - port->lbam_addr = base + 0x10; - port->lbah_addr = base + 0x14; - port->device_addr = base + 0x18; - port->command_addr = - port->status_addr = base + 0x1c; - port->altstatus_addr = - port->ctl_addr = base + 0x38; -} - - -#ifdef ATA_VERBOSE_DEBUG -static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource, - u32 offset, u32 size) -{ - u32 window_size; - u16 idx; - u8 page_mask; - long dist; - void __iomem *mmio = pe->mmio_base; - struct pdc_host_priv *hpriv = pe->private_data; - void __iomem *dimm_mmio = hpriv->dimm_mmio; - - /* hard-code chip #0 */ - mmio += PDC_CHIP0_OFS; - - page_mask = 0x00; - window_size = 0x2000 * 4; /* 32K byte uchar size */ - idx = (u16) (offset / window_size); - - writel(0x01, mmio + PDC_GENERAL_CTLR); - readl(mmio + PDC_GENERAL_CTLR); - writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); - readl(mmio + PDC_DIMM_WINDOW_CTLR); - - offset -= (idx * window_size); - idx++; - dist = ((long) (window_size - (offset + size))) >= 0 ? size : - (long) (window_size - offset); - memcpy_fromio((char *) psource, (char *) (dimm_mmio + offset / 4), - dist); - - psource += dist; - size -= dist; - for (; (long) size >= (long) window_size ;) { - writel(0x01, mmio + PDC_GENERAL_CTLR); - readl(mmio + PDC_GENERAL_CTLR); - writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); - readl(mmio + PDC_DIMM_WINDOW_CTLR); - memcpy_fromio((char *) psource, (char *) (dimm_mmio), - window_size / 4); - psource += window_size; - size -= window_size; - idx ++; - } - - if (size) { - writel(0x01, mmio + PDC_GENERAL_CTLR); - readl(mmio + PDC_GENERAL_CTLR); - writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); - readl(mmio + PDC_DIMM_WINDOW_CTLR); - memcpy_fromio((char *) psource, (char *) (dimm_mmio), - size / 4); - } -} -#endif - - -static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, - u32 offset, u32 size) -{ - u32 window_size; - u16 idx; - u8 page_mask; - long dist; - void __iomem *mmio = pe->mmio_base; - struct pdc_host_priv *hpriv = pe->private_data; - void __iomem *dimm_mmio = hpriv->dimm_mmio; - - /* hard-code chip #0 */ - mmio += PDC_CHIP0_OFS; - - page_mask = 0x00; - window_size = 0x2000 * 4; /* 32K byte uchar size */ - idx = (u16) (offset / window_size); - - writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); - readl(mmio + PDC_DIMM_WINDOW_CTLR); - offset -= (idx * window_size); - idx++; - dist = ((long)(s32)(window_size - (offset + size))) >= 0 ? size : - (long) (window_size - offset); - memcpy_toio(dimm_mmio + offset / 4, psource, dist); - writel(0x01, mmio + PDC_GENERAL_CTLR); - readl(mmio + PDC_GENERAL_CTLR); - - psource += dist; - size -= dist; - for (; (long) size >= (long) window_size ;) { - writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); - readl(mmio + PDC_DIMM_WINDOW_CTLR); - memcpy_toio(dimm_mmio, psource, window_size / 4); - writel(0x01, mmio + PDC_GENERAL_CTLR); - readl(mmio + PDC_GENERAL_CTLR); - psource += window_size; - size -= window_size; - idx ++; - } - - if (size) { - writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); - readl(mmio + PDC_DIMM_WINDOW_CTLR); - memcpy_toio(dimm_mmio, psource, size / 4); - writel(0x01, mmio + PDC_GENERAL_CTLR); - readl(mmio + PDC_GENERAL_CTLR); - } -} - - -static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, u32 device, - u32 subaddr, u32 *pdata) -{ - void __iomem *mmio = pe->mmio_base; - u32 i2creg = 0; - u32 status; - u32 count =0; - - /* hard-code chip #0 */ - mmio += PDC_CHIP0_OFS; - - i2creg |= device << 24; - i2creg |= subaddr << 16; - - /* Set the device and subaddress */ - writel(i2creg, mmio + PDC_I2C_ADDR_DATA_OFFSET); - readl(mmio + PDC_I2C_ADDR_DATA_OFFSET); - - /* Write Control to perform read operation, mask int */ - writel(PDC_I2C_READ | PDC_I2C_START | PDC_I2C_MASK_INT, - mmio + PDC_I2C_CONTROL_OFFSET); - - for (count = 0; count <= 1000; count ++) { - status = readl(mmio + PDC_I2C_CONTROL_OFFSET); - if (status & PDC_I2C_COMPLETE) { - status = readl(mmio + PDC_I2C_ADDR_DATA_OFFSET); - break; - } else if (count == 1000) - return 0; - } - - *pdata = (status >> 8) & 0x000000ff; - return 1; -} - - -static int pdc20621_detect_dimm(struct ata_probe_ent *pe) -{ - u32 data=0 ; - if (pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, - PDC_DIMM_SPD_SYSTEM_FREQ, &data)) { - if (data == 100) - return 100; - } else - return 0; - - if (pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, 9, &data)) { - if(data <= 0x75) - return 133; - } else - return 0; - - return 0; -} - - -static int pdc20621_prog_dimm0(struct ata_probe_ent *pe) -{ - u32 spd0[50]; - u32 data = 0; - int size, i; - u8 bdimmsize; - void __iomem *mmio = pe->mmio_base; - static const struct { - unsigned int reg; - unsigned int ofs; - } pdc_i2c_read_data [] = { - { PDC_DIMM_SPD_TYPE, 11 }, - { PDC_DIMM_SPD_FRESH_RATE, 12 }, - { PDC_DIMM_SPD_COLUMN_NUM, 4 }, - { PDC_DIMM_SPD_ATTRIBUTE, 21 }, - { PDC_DIMM_SPD_ROW_NUM, 3 }, - { PDC_DIMM_SPD_BANK_NUM, 17 }, - { PDC_DIMM_SPD_MODULE_ROW, 5 }, - { PDC_DIMM_SPD_ROW_PRE_CHARGE, 27 }, - { PDC_DIMM_SPD_ROW_ACTIVE_DELAY, 28 }, - { PDC_DIMM_SPD_RAS_CAS_DELAY, 29 }, - { PDC_DIMM_SPD_ACTIVE_PRECHARGE, 30 }, - { PDC_DIMM_SPD_CAS_LATENCY, 18 }, - }; - - /* hard-code chip #0 */ - mmio += PDC_CHIP0_OFS; - - for(i=0; i<ARRAY_SIZE(pdc_i2c_read_data); i++) - pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, - pdc_i2c_read_data[i].reg, - &spd0[pdc_i2c_read_data[i].ofs]); - - data |= (spd0[4] - 8) | ((spd0[21] != 0) << 3) | ((spd0[3]-11) << 4); - data |= ((spd0[17] / 4) << 6) | ((spd0[5] / 2) << 7) | - ((((spd0[27] + 9) / 10) - 1) << 8) ; - data |= (((((spd0[29] > spd0[28]) - ? spd0[29] : spd0[28]) + 9) / 10) - 1) << 10; - data |= ((spd0[30] - spd0[29] + 9) / 10 - 2) << 12; - - if (spd0[18] & 0x08) - data |= ((0x03) << 14); - else if (spd0[18] & 0x04) - data |= ((0x02) << 14); - else if (spd0[18] & 0x01) - data |= ((0x01) << 14); - else - data |= (0 << 14); - - /* - Calculate the size of bDIMMSize (power of 2) and - merge the DIMM size by program start/end address. - */ - - bdimmsize = spd0[4] + (spd0[5] / 2) + spd0[3] + (spd0[17] / 2) + 3; - size = (1 << bdimmsize) >> 20; /* size = xxx(MB) */ - data |= (((size / 16) - 1) << 16); - data |= (0 << 23); - data |= 8; - writel(data, mmio + PDC_DIMM0_CONTROL_OFFSET); - readl(mmio + PDC_DIMM0_CONTROL_OFFSET); - return size; -} - - -static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe) -{ - u32 data, spd0; - int error, i; - void __iomem *mmio = pe->mmio_base; - - /* hard-code chip #0 */ - mmio += PDC_CHIP0_OFS; - - /* - Set To Default : DIMM Module Global Control Register (0x022259F1) - DIMM Arbitration Disable (bit 20) - DIMM Data/Control Output Driving Selection (bit12 - bit15) - Refresh Enable (bit 17) - */ - - data = 0x022259F1; - writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET); - readl(mmio + PDC_SDRAM_CONTROL_OFFSET); - - /* Turn on for ECC */ - pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, - PDC_DIMM_SPD_TYPE, &spd0); - if (spd0 == 0x02) { - data |= (0x01 << 16); - writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET); - readl(mmio + PDC_SDRAM_CONTROL_OFFSET); - printk(KERN_ERR "Local DIMM ECC Enabled\n"); - } - - /* DIMM Initialization Select/Enable (bit 18/19) */ - data &= (~(1<<18)); - data |= (1<<19); - writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET); - - error = 1; - for (i = 1; i <= 10; i++) { /* polling ~5 secs */ - data = readl(mmio + PDC_SDRAM_CONTROL_OFFSET); - if (!(data & (1<<19))) { - error = 0; - break; - } - msleep(i*100); - } - return error; -} - - -static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe) -{ - int speed, size, length; - u32 addr,spd0,pci_status; - u32 tmp=0; - u32 time_period=0; - u32 tcount=0; - u32 ticks=0; - u32 clock=0; - u32 fparam=0; - void __iomem *mmio = pe->mmio_base; - - /* hard-code chip #0 */ - mmio += PDC_CHIP0_OFS; - - /* Initialize PLL based upon PCI Bus Frequency */ - - /* Initialize Time Period Register */ - writel(0xffffffff, mmio + PDC_TIME_PERIOD); - time_period = readl(mmio + PDC_TIME_PERIOD); - VPRINTK("Time Period Register (0x40): 0x%x\n", time_period); - - /* Enable timer */ - writel(0x00001a0, mmio + PDC_TIME_CONTROL); - readl(mmio + PDC_TIME_CONTROL); - - /* Wait 3 seconds */ - msleep(3000); - - /* - When timer is enabled, counter is decreased every internal - clock cycle. - */ - - tcount = readl(mmio + PDC_TIME_COUNTER); - VPRINTK("Time Counter Register (0x44): 0x%x\n", tcount); - - /* - If SX4 is on PCI-X bus, after 3 seconds, the timer counter - register should be >= (0xffffffff - 3x10^8). - */ - if(tcount >= PCI_X_TCOUNT) { - ticks = (time_period - tcount); - VPRINTK("Num counters 0x%x (%d)\n", ticks, ticks); - - clock = (ticks / 300000); - VPRINTK("10 * Internal clk = 0x%x (%d)\n", clock, clock); - - clock = (clock * 33); - VPRINTK("10 * Internal clk * 33 = 0x%x (%d)\n", clock, clock); - - /* PLL F Param (bit 22:16) */ - fparam = (1400000 / clock) - 2; - VPRINTK("PLL F Param: 0x%x (%d)\n", fparam, fparam); - - /* OD param = 0x2 (bit 31:30), R param = 0x5 (bit 29:25) */ - pci_status = (0x8a001824 | (fparam << 16)); - } else - pci_status = PCI_PLL_INIT; - - /* Initialize PLL. */ - VPRINTK("pci_status: 0x%x\n", pci_status); - writel(pci_status, mmio + PDC_CTL_STATUS); - readl(mmio + PDC_CTL_STATUS); - - /* - Read SPD of DIMM by I2C interface, - and program the DIMM Module Controller. - */ - if (!(speed = pdc20621_detect_dimm(pe))) { - printk(KERN_ERR "Detect Local DIMM Fail\n"); - return 1; /* DIMM error */ - } - VPRINTK("Local DIMM Speed = %d\n", speed); - - /* Programming DIMM0 Module Control Register (index_CID0:80h) */ - size = pdc20621_prog_dimm0(pe); - VPRINTK("Local DIMM Size = %dMB\n",size); - - /* Programming DIMM Module Global Control Register (index_CID0:88h) */ - if (pdc20621_prog_dimm_global(pe)) { - printk(KERN_ERR "Programming DIMM Module Global Control Register Fail\n"); - return 1; - } - -#ifdef ATA_VERBOSE_DEBUG - { - u8 test_parttern1[40] = {0x55,0xAA,'P','r','o','m','i','s','e',' ', - 'N','o','t',' ','Y','e','t',' ','D','e','f','i','n','e','d',' ', - '1','.','1','0', - '9','8','0','3','1','6','1','2',0,0}; - u8 test_parttern2[40] = {0}; - - pdc20621_put_to_dimm(pe, (void *) test_parttern2, 0x10040, 40); - pdc20621_put_to_dimm(pe, (void *) test_parttern2, 0x40, 40); - - pdc20621_put_to_dimm(pe, (void *) test_parttern1, 0x10040, 40); - pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x40, 40); - printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], - test_parttern2[1], &(test_parttern2[2])); - pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x10040, - 40); - printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], - test_parttern2[1], &(test_parttern2[2])); - - pdc20621_put_to_dimm(pe, (void *) test_parttern1, 0x40, 40); - pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x40, 40); - printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0], - test_parttern2[1], &(test_parttern2[2])); - } -#endif - - /* ECC initiliazation. */ - - pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, - PDC_DIMM_SPD_TYPE, &spd0); - if (spd0 == 0x02) { - VPRINTK("Start ECC initialization\n"); - addr = 0; - length = size * 1024 * 1024; - while (addr < length) { - pdc20621_put_to_dimm(pe, (void *) &tmp, addr, - sizeof(u32)); - addr += sizeof(u32); - } - VPRINTK("Finish ECC initialization\n"); - } - return 0; -} - - -static void pdc_20621_init(struct ata_probe_ent *pe) -{ - u32 tmp; - void __iomem *mmio = pe->mmio_base; - - /* hard-code chip #0 */ - mmio += PDC_CHIP0_OFS; - - /* - * Select page 0x40 for our 32k DIMM window - */ - tmp = readl(mmio + PDC_20621_DIMM_WINDOW) & 0xffff0000; - tmp |= PDC_PAGE_WINDOW; /* page 40h; arbitrarily selected */ - writel(tmp, mmio + PDC_20621_DIMM_WINDOW); - - /* - * Reset Host DMA - */ - tmp = readl(mmio + PDC_HDMA_CTLSTAT); - tmp |= PDC_RESET; - writel(tmp, mmio + PDC_HDMA_CTLSTAT); - readl(mmio + PDC_HDMA_CTLSTAT); /* flush */ - - udelay(10); - - tmp = readl(mmio + PDC_HDMA_CTLSTAT); - tmp &= ~PDC_RESET; - writel(tmp, mmio + PDC_HDMA_CTLSTAT); - readl(mmio + PDC_HDMA_CTLSTAT); /* flush */ -} - -static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version; - struct ata_probe_ent *probe_ent = NULL; - unsigned long base; - void __iomem *mmio_base; - void __iomem *dimm_mmio = NULL; - struct pdc_host_priv *hpriv = NULL; - unsigned int board_idx = (unsigned int) ent->driver_data; - int pci_dev_busy = 0; - int rc; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out; - } - - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) { - rc = -ENOMEM; - goto err_out_regions; - } - - memset(probe_ent, 0, sizeof(*probe_ent)); - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - mmio_base = pci_iomap(pdev, 3, 0); - if (mmio_base == NULL) { - rc = -ENOMEM; - goto err_out_free_ent; - } - base = (unsigned long) mmio_base; - - hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL); - if (!hpriv) { - rc = -ENOMEM; - goto err_out_iounmap; - } - memset(hpriv, 0, sizeof(*hpriv)); - - dimm_mmio = pci_iomap(pdev, 4, 0); - if (!dimm_mmio) { - kfree(hpriv); - rc = -ENOMEM; - goto err_out_iounmap; - } - - hpriv->dimm_mmio = dimm_mmio; - - probe_ent->sht = pdc_port_info[board_idx].sht; - probe_ent->host_flags = pdc_port_info[board_idx].host_flags; - probe_ent->pio_mask = pdc_port_info[board_idx].pio_mask; - probe_ent->mwdma_mask = pdc_port_info[board_idx].mwdma_mask; - probe_ent->udma_mask = pdc_port_info[board_idx].udma_mask; - probe_ent->port_ops = pdc_port_info[board_idx].port_ops; - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = SA_SHIRQ; - probe_ent->mmio_base = mmio_base; - - probe_ent->private_data = hpriv; - base += PDC_CHIP0_OFS; - - probe_ent->n_ports = 4; - pdc_sata_setup_port(&probe_ent->port[0], base + 0x200); - pdc_sata_setup_port(&probe_ent->port[1], base + 0x280); - pdc_sata_setup_port(&probe_ent->port[2], base + 0x300); - pdc_sata_setup_port(&probe_ent->port[3], base + 0x380); - - pci_set_master(pdev); - - /* initialize adapter */ - /* initialize local dimm */ - if (pdc20621_dimm_init(probe_ent)) { - rc = -ENOMEM; - goto err_out_iounmap_dimm; - } - pdc_20621_init(probe_ent); - - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - kfree(probe_ent); - - return 0; - -err_out_iounmap_dimm: /* only get to this label if 20621 */ - kfree(hpriv); - pci_iounmap(pdev, dimm_mmio); -err_out_iounmap: - pci_iounmap(pdev, mmio_base); -err_out_free_ent: - kfree(probe_ent); -err_out_regions: - pci_release_regions(pdev); -err_out: - if (!pci_dev_busy) - pci_disable_device(pdev); - return rc; -} - - -static int __init pdc_sata_init(void) -{ - return pci_module_init(&pdc_sata_pci_driver); -} - - -static void __exit pdc_sata_exit(void) -{ - pci_unregister_driver(&pdc_sata_pci_driver); -} - - -MODULE_AUTHOR("Jeff Garzik"); -MODULE_DESCRIPTION("Promise SATA low-level driver"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, pdc_sata_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -module_init(pdc_sata_init); -module_exit(pdc_sata_exit); diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c deleted file mode 100644 index f668c997e9a..00000000000 --- a/drivers/scsi/sata_uli.c +++ /dev/null @@ -1,301 +0,0 @@ -/* - * sata_uli.c - ULi Electronics SATA - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available under NDA. - * - */ - -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/blkdev.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <scsi/scsi_host.h> -#include <linux/libata.h> - -#define DRV_NAME "sata_uli" -#define DRV_VERSION "0.6" - -enum { - uli_5289 = 0, - uli_5287 = 1, - uli_5281 = 2, - - uli_max_ports = 4, - - /* PCI configuration registers */ - ULI5287_BASE = 0x90, /* sata0 phy SCR registers */ - ULI5287_OFFS = 0x10, /* offset from sata0->sata1 phy regs */ - ULI5281_BASE = 0x60, /* sata0 phy SCR registers */ - ULI5281_OFFS = 0x60, /* offset from sata0->sata1 phy regs */ -}; - -struct uli_priv { - unsigned int scr_cfg_addr[uli_max_ports]; -}; - -static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static u32 uli_scr_read (struct ata_port *ap, unsigned int sc_reg); -static void uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); - -static const struct pci_device_id uli_pci_tbl[] = { - { PCI_VENDOR_ID_AL, 0x5289, PCI_ANY_ID, PCI_ANY_ID, 0, 0, uli_5289 }, - { PCI_VENDOR_ID_AL, 0x5287, PCI_ANY_ID, PCI_ANY_ID, 0, 0, uli_5287 }, - { PCI_VENDOR_ID_AL, 0x5281, PCI_ANY_ID, PCI_ANY_ID, 0, 0, uli_5281 }, - { } /* terminate list */ -}; - - -static struct pci_driver uli_pci_driver = { - .name = DRV_NAME, - .id_table = uli_pci_tbl, - .probe = uli_init_one, - .remove = ata_pci_remove_one, -}; - -static struct scsi_host_template uli_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - -static const struct ata_port_operations uli_ops = { - .port_disable = ata_port_disable, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - - .scr_read = uli_scr_read, - .scr_write = uli_scr_write, - - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop, -}; - -static struct ata_port_info uli_port_info = { - .sht = &uli_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &uli_ops, -}; - - -MODULE_AUTHOR("Peer Chen"); -MODULE_DESCRIPTION("low-level driver for ULi Electronics SATA controller"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, uli_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg) -{ - struct uli_priv *hpriv = ap->host_set->private_data; - return hpriv->scr_cfg_addr[ap->port_no] + (4 * sc_reg); -} - -static u32 uli_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) -{ - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - unsigned int cfg_addr = get_scr_cfg_addr(ap, sc_reg); - u32 val; - - pci_read_config_dword(pdev, cfg_addr, &val); - return val; -} - -static void uli_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val) -{ - struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - unsigned int cfg_addr = get_scr_cfg_addr(ap, scr); - - pci_write_config_dword(pdev, cfg_addr, val); -} - -static u32 uli_scr_read (struct ata_port *ap, unsigned int sc_reg) -{ - if (sc_reg > SCR_CONTROL) - return 0xffffffffU; - - return uli_scr_cfg_read(ap, sc_reg); -} - -static void uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) -{ - if (sc_reg > SCR_CONTROL) //SCR_CONTROL=2, SCR_ERROR=1, SCR_STATUS=0 - return; - - uli_scr_cfg_write(ap, sc_reg, val); -} - -static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version; - struct ata_probe_ent *probe_ent; - struct ata_port_info *ppi; - int rc; - unsigned int board_idx = (unsigned int) ent->driver_data; - int pci_dev_busy = 0; - struct uli_priv *hpriv; - - if (!printed_version++) - dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out; - } - - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - ppi = &uli_port_info; - probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); - if (!probe_ent) { - rc = -ENOMEM; - goto err_out_regions; - } - - hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL); - if (!hpriv) { - rc = -ENOMEM; - goto err_out_probe_ent; - } - - probe_ent->private_data = hpriv; - - switch (board_idx) { - case uli_5287: - hpriv->scr_cfg_addr[0] = ULI5287_BASE; - hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS; - probe_ent->n_ports = 4; - - probe_ent->port[2].cmd_addr = pci_resource_start(pdev, 0) + 8; - probe_ent->port[2].altstatus_addr = - probe_ent->port[2].ctl_addr = - (pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS) + 4; - probe_ent->port[2].bmdma_addr = pci_resource_start(pdev, 4) + 16; - hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4; - - probe_ent->port[3].cmd_addr = pci_resource_start(pdev, 2) + 8; - probe_ent->port[3].altstatus_addr = - probe_ent->port[3].ctl_addr = - (pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS) + 4; - probe_ent->port[3].bmdma_addr = pci_resource_start(pdev, 4) + 24; - hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5; - - ata_std_ports(&probe_ent->port[2]); - ata_std_ports(&probe_ent->port[3]); - break; - - case uli_5289: - hpriv->scr_cfg_addr[0] = ULI5287_BASE; - hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS; - break; - - case uli_5281: - hpriv->scr_cfg_addr[0] = ULI5281_BASE; - hpriv->scr_cfg_addr[1] = ULI5281_BASE + ULI5281_OFFS; - break; - - default: - BUG(); - break; - } - - pci_set_master(pdev); - pci_intx(pdev, 1); - - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - kfree(probe_ent); - - return 0; - -err_out_probe_ent: - kfree(probe_ent); -err_out_regions: - pci_release_regions(pdev); -err_out: - if (!pci_dev_busy) - pci_disable_device(pdev); - return rc; - -} - -static int __init uli_init(void) -{ - return pci_module_init(&uli_pci_driver); -} - -static void __exit uli_exit(void) -{ - pci_unregister_driver(&uli_pci_driver); -} - - -module_init(uli_init); -module_exit(uli_exit); diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c deleted file mode 100644 index 322890b400a..00000000000 --- a/drivers/scsi/sata_via.c +++ /dev/null @@ -1,394 +0,0 @@ -/* - * sata_via.c - VIA Serial ATA controllers - * - * Maintained by: Jeff Garzik <jgarzik@pobox.com> - * Please ALWAYS copy linux-ide@vger.kernel.org - on emails. - * - * Copyright 2003-2004 Red Hat, Inc. All rights reserved. - * Copyright 2003-2004 Jeff Garzik - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Hardware documentation available under NDA. - * - * - * To-do list: - * - VT6421 PATA support - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/blkdev.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <scsi/scsi_host.h> -#include <linux/libata.h> -#include <asm/io.h> - -#define DRV_NAME "sata_via" -#define DRV_VERSION "1.2" - -enum board_ids_enum { - vt6420, - vt6421, -}; - -enum { - SATA_CHAN_ENAB = 0x40, /* SATA channel enable */ - SATA_INT_GATE = 0x41, /* SATA interrupt gating */ - SATA_NATIVE_MODE = 0x42, /* Native mode enable */ - SATA_PATA_SHARING = 0x49, /* PATA/SATA sharing func ctrl */ - - PORT0 = (1 << 1), - PORT1 = (1 << 0), - ALL_PORTS = PORT0 | PORT1, - N_PORTS = 2, - - NATIVE_MODE_ALL = (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4), - - SATA_EXT_PHY = (1 << 6), /* 0==use PATA, 1==ext phy */ - SATA_2DEV = (1 << 5), /* SATA is master/slave */ -}; - -static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg); -static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); - -static const struct pci_device_id svia_pci_tbl[] = { - { 0x1106, 0x3149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 }, - { 0x1106, 0x3249, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6421 }, - - { } /* terminate list */ -}; - -static struct pci_driver svia_pci_driver = { - .name = DRV_NAME, - .id_table = svia_pci_tbl, - .probe = svia_init_one, - .remove = ata_pci_remove_one, -}; - -static struct scsi_host_template svia_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - -static const struct ata_port_operations svia_sata_ops = { - .port_disable = ata_port_disable, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - - .scr_read = svia_scr_read, - .scr_write = svia_scr_write, - - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop, -}; - -static struct ata_port_info svia_port_info = { - .sht = &svia_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x7f, - .port_ops = &svia_sata_ops, -}; - -MODULE_AUTHOR("Jeff Garzik"); -MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, svia_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg) -{ - if (sc_reg > SCR_CONTROL) - return 0xffffffffU; - return inl(ap->ioaddr.scr_addr + (4 * sc_reg)); -} - -static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) -{ - if (sc_reg > SCR_CONTROL) - return; - outl(val, ap->ioaddr.scr_addr + (4 * sc_reg)); -} - -static const unsigned int svia_bar_sizes[] = { - 8, 4, 8, 4, 16, 256 -}; - -static const unsigned int vt6421_bar_sizes[] = { - 16, 16, 16, 16, 32, 128 -}; - -static unsigned long svia_scr_addr(unsigned long addr, unsigned int port) -{ - return addr + (port * 128); -} - -static unsigned long vt6421_scr_addr(unsigned long addr, unsigned int port) -{ - return addr + (port * 64); -} - -static void vt6421_init_addrs(struct ata_probe_ent *probe_ent, - struct pci_dev *pdev, - unsigned int port) -{ - unsigned long reg_addr = pci_resource_start(pdev, port); - unsigned long bmdma_addr = pci_resource_start(pdev, 4) + (port * 8); - unsigned long scr_addr; - - probe_ent->port[port].cmd_addr = reg_addr; - probe_ent->port[port].altstatus_addr = - probe_ent->port[port].ctl_addr = (reg_addr + 8) | ATA_PCI_CTL_OFS; - probe_ent->port[port].bmdma_addr = bmdma_addr; - - scr_addr = vt6421_scr_addr(pci_resource_start(pdev, 5), port); - probe_ent->port[port].scr_addr = scr_addr; - - ata_std_ports(&probe_ent->port[port]); -} - -static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev) -{ - struct ata_probe_ent *probe_ent; - struct ata_port_info *ppi = &svia_port_info; - - probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); - if (!probe_ent) - return NULL; - - probe_ent->port[0].scr_addr = - svia_scr_addr(pci_resource_start(pdev, 5), 0); - probe_ent->port[1].scr_addr = - svia_scr_addr(pci_resource_start(pdev, 5), 1); - - return probe_ent; -} - -static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev) -{ - struct ata_probe_ent *probe_ent; - unsigned int i; - - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); - if (!probe_ent) - return NULL; - - memset(probe_ent, 0, sizeof(*probe_ent)); - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - probe_ent->sht = &svia_sht; - probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY; - probe_ent->port_ops = &svia_sata_ops; - probe_ent->n_ports = N_PORTS; - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = SA_SHIRQ; - probe_ent->pio_mask = 0x1f; - probe_ent->mwdma_mask = 0x07; - probe_ent->udma_mask = 0x7f; - - for (i = 0; i < N_PORTS; i++) - vt6421_init_addrs(probe_ent, pdev, i); - - return probe_ent; -} - -static void svia_configure(struct pci_dev *pdev) -{ - u8 tmp8; - - pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8); - dev_printk(KERN_INFO, &pdev->dev, "routed to hard irq line %d\n", - (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f); - - /* make sure SATA channels are enabled */ - pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8); - if ((tmp8 & ALL_PORTS) != ALL_PORTS) { - dev_printk(KERN_DEBUG, &pdev->dev, - "enabling SATA channels (0x%x)\n", - (int) tmp8); - tmp8 |= ALL_PORTS; - pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8); - } - - /* make sure interrupts for each channel sent to us */ - pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8); - if ((tmp8 & ALL_PORTS) != ALL_PORTS) { - dev_printk(KERN_DEBUG, &pdev->dev, - "enabling SATA channel interrupts (0x%x)\n", - (int) tmp8); - tmp8 |= ALL_PORTS; - pci_write_config_byte(pdev, SATA_INT_GATE, tmp8); - } - - /* make sure native mode is enabled */ - pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8); - if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) { - dev_printk(KERN_DEBUG, &pdev->dev, - "enabling SATA channel native mode (0x%x)\n", - (int) tmp8); - tmp8 |= NATIVE_MODE_ALL; - pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8); - } -} - -static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version; - unsigned int i; - int rc; - struct ata_probe_ent *probe_ent; - int board_id = (int) ent->driver_data; - const int *bar_sizes; - int pci_dev_busy = 0; - u8 tmp8; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out; - } - - if (board_id == vt6420) { - pci_read_config_byte(pdev, SATA_PATA_SHARING, &tmp8); - if (tmp8 & SATA_2DEV) { - dev_printk(KERN_ERR, &pdev->dev, - "SATA master/slave not supported (0x%x)\n", - (int) tmp8); - rc = -EIO; - goto err_out_regions; - } - - bar_sizes = &svia_bar_sizes[0]; - } else { - bar_sizes = &vt6421_bar_sizes[0]; - } - - for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++) - if ((pci_resource_start(pdev, i) == 0) || - (pci_resource_len(pdev, i) < bar_sizes[i])) { - dev_printk(KERN_ERR, &pdev->dev, - "invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n", - i, - pci_resource_start(pdev, i), - pci_resource_len(pdev, i)); - rc = -ENODEV; - goto err_out_regions; - } - - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - if (board_id == vt6420) - probe_ent = vt6420_init_probe_ent(pdev); - else - probe_ent = vt6421_init_probe_ent(pdev); - - if (!probe_ent) { - dev_printk(KERN_ERR, &pdev->dev, "out of memory\n"); - rc = -ENOMEM; - goto err_out_regions; - } - - svia_configure(pdev); - - pci_set_master(pdev); - - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - kfree(probe_ent); - - return 0; - -err_out_regions: - pci_release_regions(pdev); -err_out: - if (!pci_dev_busy) - pci_disable_device(pdev); - return rc; -} - -static int __init svia_init(void) -{ - return pci_module_init(&svia_pci_driver); -} - -static void __exit svia_exit(void) -{ - pci_unregister_driver(&svia_pci_driver); -} - -module_init(svia_init); -module_exit(svia_exit); - diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c deleted file mode 100644 index 6d0c4f18e65..00000000000 --- a/drivers/scsi/sata_vsc.c +++ /dev/null @@ -1,486 +0,0 @@ -/* - * sata_vsc.c - Vitesse VSC7174 4 port DPA SATA - * - * Maintained by: Jeremy Higdon @ SGI - * Please ALWAYS copy linux-ide@vger.kernel.org - * on emails. - * - * Copyright 2004 SGI - * - * Bits from Jeff Garzik, Copyright RedHat, Inc. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * libata documentation is available via 'make {ps|pdf}docs', - * as Documentation/DocBook/libata.* - * - * Vitesse hardware documentation presumably available under NDA. - * Intel 31244 (same hardware interface) documentation presumably - * available from http://developer.intel.com/ - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/blkdev.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/dma-mapping.h> -#include <linux/device.h> -#include <scsi/scsi_host.h> -#include <linux/libata.h> - -#define DRV_NAME "sata_vsc" -#define DRV_VERSION "1.2" - -enum { - /* Interrupt register offsets (from chip base address) */ - VSC_SATA_INT_STAT_OFFSET = 0x00, - VSC_SATA_INT_MASK_OFFSET = 0x04, - - /* Taskfile registers offsets */ - VSC_SATA_TF_CMD_OFFSET = 0x00, - VSC_SATA_TF_DATA_OFFSET = 0x00, - VSC_SATA_TF_ERROR_OFFSET = 0x04, - VSC_SATA_TF_FEATURE_OFFSET = 0x06, - VSC_SATA_TF_NSECT_OFFSET = 0x08, - VSC_SATA_TF_LBAL_OFFSET = 0x0c, - VSC_SATA_TF_LBAM_OFFSET = 0x10, - VSC_SATA_TF_LBAH_OFFSET = 0x14, - VSC_SATA_TF_DEVICE_OFFSET = 0x18, - VSC_SATA_TF_STATUS_OFFSET = 0x1c, - VSC_SATA_TF_COMMAND_OFFSET = 0x1d, - VSC_SATA_TF_ALTSTATUS_OFFSET = 0x28, - VSC_SATA_TF_CTL_OFFSET = 0x29, - - /* DMA base */ - VSC_SATA_UP_DESCRIPTOR_OFFSET = 0x64, - VSC_SATA_UP_DATA_BUFFER_OFFSET = 0x6C, - VSC_SATA_DMA_CMD_OFFSET = 0x70, - - /* SCRs base */ - VSC_SATA_SCR_STATUS_OFFSET = 0x100, - VSC_SATA_SCR_ERROR_OFFSET = 0x104, - VSC_SATA_SCR_CONTROL_OFFSET = 0x108, - - /* Port stride */ - VSC_SATA_PORT_OFFSET = 0x200, - - /* Error interrupt status bit offsets */ - VSC_SATA_INT_ERROR_CRC = 0x40, - VSC_SATA_INT_ERROR_T = 0x20, - VSC_SATA_INT_ERROR_P = 0x10, - VSC_SATA_INT_ERROR_R = 0x8, - VSC_SATA_INT_ERROR_E = 0x4, - VSC_SATA_INT_ERROR_M = 0x2, - VSC_SATA_INT_PHY_CHANGE = 0x1, - VSC_SATA_INT_ERROR = (VSC_SATA_INT_ERROR_CRC | VSC_SATA_INT_ERROR_T | \ - VSC_SATA_INT_ERROR_P | VSC_SATA_INT_ERROR_R | \ - VSC_SATA_INT_ERROR_E | VSC_SATA_INT_ERROR_M | \ - VSC_SATA_INT_PHY_CHANGE), -}; - - -#define is_vsc_sata_int_err(port_idx, int_status) \ - (int_status & (VSC_SATA_INT_ERROR << (8 * port_idx))) - - -static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) -{ - if (sc_reg > SCR_CONTROL) - return 0xffffffffU; - return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); -} - - -static void vsc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, - u32 val) -{ - if (sc_reg > SCR_CONTROL) - return; - writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); -} - - -static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl) -{ - void __iomem *mask_addr; - u8 mask; - - mask_addr = ap->host_set->mmio_base + - VSC_SATA_INT_MASK_OFFSET + ap->port_no; - mask = readb(mask_addr); - if (ctl & ATA_NIEN) - mask |= 0x80; - else - mask &= 0x7F; - writeb(mask, mask_addr); -} - - -static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - /* - * The only thing the ctl register is used for is SRST. - * That is not enabled or disabled via tf_load. - * However, if ATA_NIEN is changed, then we need to change the interrupt register. - */ - if ((tf->ctl & ATA_NIEN) != (ap->last_ctl & ATA_NIEN)) { - ap->last_ctl = tf->ctl; - vsc_intr_mask_update(ap, tf->ctl & ATA_NIEN); - } - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->feature_addr); - writew(tf->nsect | (((u16)tf->hob_nsect) << 8), ioaddr->nsect_addr); - writew(tf->lbal | (((u16)tf->hob_lbal) << 8), ioaddr->lbal_addr); - writew(tf->lbam | (((u16)tf->hob_lbam) << 8), ioaddr->lbam_addr); - writew(tf->lbah | (((u16)tf->hob_lbah) << 8), ioaddr->lbah_addr); - } else if (is_addr) { - writew(tf->feature, ioaddr->feature_addr); - writew(tf->nsect, ioaddr->nsect_addr); - writew(tf->lbal, ioaddr->lbal_addr); - writew(tf->lbam, ioaddr->lbam_addr); - writew(tf->lbah, ioaddr->lbah_addr); - } - - if (tf->flags & ATA_TFLAG_DEVICE) - writeb(tf->device, ioaddr->device_addr); - - ata_wait_idle(ap); -} - - -static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - u16 nsect, lbal, lbam, lbah, feature; - - tf->command = ata_check_status(ap); - tf->device = readw(ioaddr->device_addr); - feature = readw(ioaddr->error_addr); - nsect = readw(ioaddr->nsect_addr); - lbal = readw(ioaddr->lbal_addr); - lbam = readw(ioaddr->lbam_addr); - lbah = readw(ioaddr->lbah_addr); - - tf->feature = feature; - tf->nsect = nsect; - tf->lbal = lbal; - tf->lbam = lbam; - tf->lbah = lbah; - - if (tf->flags & ATA_TFLAG_LBA48) { - tf->hob_feature = feature >> 8; - tf->hob_nsect = nsect >> 8; - tf->hob_lbal = lbal >> 8; - tf->hob_lbam = lbam >> 8; - tf->hob_lbah = lbah >> 8; - } -} - - -/* - * vsc_sata_interrupt - * - * Read the interrupt register and process for the devices that have them pending. - */ -static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance, - struct pt_regs *regs) -{ - struct ata_host_set *host_set = dev_instance; - unsigned int i; - unsigned int handled = 0; - u32 int_status; - - spin_lock(&host_set->lock); - - int_status = readl(host_set->mmio_base + VSC_SATA_INT_STAT_OFFSET); - - for (i = 0; i < host_set->n_ports; i++) { - if (int_status & ((u32) 0xFF << (8 * i))) { - struct ata_port *ap; - - ap = host_set->ports[i]; - - if (is_vsc_sata_int_err(i, int_status)) { - u32 err_status; - printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__); - err_status = ap ? vsc_sata_scr_read(ap, SCR_ERROR) : 0; - vsc_sata_scr_write(ap, SCR_ERROR, err_status); - handled++; - } - - if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { - struct ata_queued_cmd *qc; - - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) - handled += ata_host_intr(ap, qc); - else if (is_vsc_sata_int_err(i, int_status)) { - /* - * On some chips (i.e. Intel 31244), an error - * interrupt will sneak in at initialization - * time (phy state changes). Clearing the SCR - * error register is not required, but it prevents - * the phy state change interrupts from recurring - * later. - */ - u32 err_status; - err_status = vsc_sata_scr_read(ap, SCR_ERROR); - printk(KERN_DEBUG "%s: clearing interrupt, " - "status %x; sata err status %x\n", - __FUNCTION__, - int_status, err_status); - vsc_sata_scr_write(ap, SCR_ERROR, err_status); - /* Clear interrupt status */ - ata_chk_status(ap); - handled++; - } - } - } - } - - spin_unlock(&host_set->lock); - - return IRQ_RETVAL(handled); -} - - -static struct scsi_host_template vsc_sata_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, -}; - - -static const struct ata_port_operations vsc_sata_ops = { - .port_disable = ata_port_disable, - .tf_load = vsc_sata_tf_load, - .tf_read = vsc_sata_tf_read, - .exec_command = ata_exec_command, - .check_status = ata_check_status, - .dev_select = ata_std_dev_select, - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .irq_handler = vsc_sata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .scr_read = vsc_sata_scr_read, - .scr_write = vsc_sata_scr_write, - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_pci_host_stop, -}; - -static void __devinit vsc_sata_setup_port(struct ata_ioports *port, unsigned long base) -{ - port->cmd_addr = base + VSC_SATA_TF_CMD_OFFSET; - port->data_addr = base + VSC_SATA_TF_DATA_OFFSET; - port->error_addr = base + VSC_SATA_TF_ERROR_OFFSET; - port->feature_addr = base + VSC_SATA_TF_FEATURE_OFFSET; - port->nsect_addr = base + VSC_SATA_TF_NSECT_OFFSET; - port->lbal_addr = base + VSC_SATA_TF_LBAL_OFFSET; - port->lbam_addr = base + VSC_SATA_TF_LBAM_OFFSET; - port->lbah_addr = base + VSC_SATA_TF_LBAH_OFFSET; - port->device_addr = base + VSC_SATA_TF_DEVICE_OFFSET; - port->status_addr = base + VSC_SATA_TF_STATUS_OFFSET; - port->command_addr = base + VSC_SATA_TF_COMMAND_OFFSET; - port->altstatus_addr = base + VSC_SATA_TF_ALTSTATUS_OFFSET; - port->ctl_addr = base + VSC_SATA_TF_CTL_OFFSET; - port->bmdma_addr = base + VSC_SATA_DMA_CMD_OFFSET; - port->scr_addr = base + VSC_SATA_SCR_STATUS_OFFSET; - writel(0, base + VSC_SATA_UP_DESCRIPTOR_OFFSET); - writel(0, base + VSC_SATA_UP_DATA_BUFFER_OFFSET); -} - - -static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int printed_version; - struct ata_probe_ent *probe_ent = NULL; - unsigned long base; - int pci_dev_busy = 0; - void __iomem *mmio_base; - int rc; - - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - /* - * Check if we have needed resource mapped. - */ - if (pci_resource_len(pdev, 0) == 0) { - rc = -ENODEV; - goto err_out; - } - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out; - } - - /* - * Use 32 bit DMA mask, because 64 bit address support is poor. - */ - rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) - goto err_out_regions; - - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) { - rc = -ENOMEM; - goto err_out_regions; - } - memset(probe_ent, 0, sizeof(*probe_ent)); - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - mmio_base = pci_iomap(pdev, 0, 0); - if (mmio_base == NULL) { - rc = -ENOMEM; - goto err_out_free_ent; - } - base = (unsigned long) mmio_base; - - /* - * Due to a bug in the chip, the default cache line size can't be used - */ - pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80); - - probe_ent->sht = &vsc_sata_sht; - probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO; - probe_ent->port_ops = &vsc_sata_ops; - probe_ent->n_ports = 4; - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = SA_SHIRQ; - probe_ent->mmio_base = mmio_base; - - /* We don't care much about the PIO/UDMA masks, but the core won't like us - * if we don't fill these - */ - probe_ent->pio_mask = 0x1f; - probe_ent->mwdma_mask = 0x07; - probe_ent->udma_mask = 0x7f; - - /* We have 4 ports per PCI function */ - vsc_sata_setup_port(&probe_ent->port[0], base + 1 * VSC_SATA_PORT_OFFSET); - vsc_sata_setup_port(&probe_ent->port[1], base + 2 * VSC_SATA_PORT_OFFSET); - vsc_sata_setup_port(&probe_ent->port[2], base + 3 * VSC_SATA_PORT_OFFSET); - vsc_sata_setup_port(&probe_ent->port[3], base + 4 * VSC_SATA_PORT_OFFSET); - - pci_set_master(pdev); - - /* - * Config offset 0x98 is "Extended Control and Status Register 0" - * Default value is (1 << 28). All bits except bit 28 are reserved in - * DPA mode. If bit 28 is set, LED 0 reflects all ports' activity. - * If bit 28 is clear, each port has its own LED. - */ - pci_write_config_dword(pdev, 0x98, 0); - - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - kfree(probe_ent); - - return 0; - -err_out_free_ent: - kfree(probe_ent); -err_out_regions: - pci_release_regions(pdev); -err_out: - if (!pci_dev_busy) - pci_disable_device(pdev); - return rc; -} - - -/* - * Intel 31244 is supposed to be identical. - * Compatibility is untested as of yet. - */ -static const struct pci_device_id vsc_sata_pci_tbl[] = { - { PCI_VENDOR_ID_VITESSE, PCI_DEVICE_ID_VITESSE_VSC7174, - PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 }, - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GD31244, - PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 }, - { } -}; - - -static struct pci_driver vsc_sata_pci_driver = { - .name = DRV_NAME, - .id_table = vsc_sata_pci_tbl, - .probe = vsc_sata_init_one, - .remove = ata_pci_remove_one, -}; - - -static int __init vsc_sata_init(void) -{ - return pci_module_init(&vsc_sata_pci_driver); -} - - -static void __exit vsc_sata_exit(void) -{ - pci_unregister_driver(&vsc_sata_pci_driver); -} - - -MODULE_AUTHOR("Jeremy Higdon"); -MODULE_DESCRIPTION("low-level driver for Vitesse VSC7174 SATA controller"); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, vsc_sata_pci_tbl); -MODULE_VERSION(DRV_VERSION); - -module_init(vsc_sata_init); -module_exit(vsc_sata_exit); diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 2ab7df0dcfe..7a054f9d1ee 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -96,7 +96,11 @@ unsigned int scsi_logging_level; EXPORT_SYMBOL(scsi_logging_level); #endif -const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE] = { +/* NB: These are exposed through /proc/scsi/scsi and form part of the ABI. + * You may not alter any existing entry (although adding new ones is + * encouraged once assigned by ANSI/INCITS T10 + */ +static const char *const scsi_device_types[] = { "Direct-Access ", "Sequential-Access", "Printer ", @@ -107,13 +111,29 @@ const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE] = { "Optical Device ", "Medium Changer ", "Communications ", - "Unknown ", - "Unknown ", + "ASC IT8 ", + "ASC IT8 ", "RAID ", "Enclosure ", "Direct-Access-RBC", + "Optical card ", + "Bridge controller", + "Object storage ", + "Automation/Drive ", }; -EXPORT_SYMBOL(scsi_device_types); + +const char * scsi_device_type(unsigned type) +{ + if (type == 0x1e) + return "Well-known LUN "; + if (type == 0x1f) + return "No Device "; + if (type > ARRAY_SIZE(scsi_device_types)) + return "Unknown "; + return scsi_device_types[type]; +} + +EXPORT_SYMBOL(scsi_device_type); struct scsi_host_cmd_pool { kmem_cache_t *slab; @@ -346,7 +366,7 @@ void scsi_log_send(struct scsi_cmnd *cmd) if (level > 3) { printk(KERN_INFO "buffer = 0x%p, bufflen = %d," " done = 0x%p, queuecommand 0x%p\n", - cmd->buffer, cmd->bufflen, + cmd->request_buffer, cmd->request_bufflen, cmd->done, sdev->host->hostt->queuecommand); @@ -661,11 +681,6 @@ void __scsi_done(struct scsi_cmnd *cmd) */ int scsi_retry_command(struct scsi_cmnd *cmd) { - /* - * Restore the SCSI command state. - */ - scsi_setup_cmd_retry(cmd); - /* * Zero the sense information from the last time we tried * this command. @@ -711,10 +726,6 @@ void scsi_finish_command(struct scsi_cmnd *cmd) "Notifying upper driver of completion " "(result %x)\n", cmd->result)); - /* - * We can get here with use_sg=0, causing a panic in the upper level - */ - cmd->use_sg = cmd->old_use_sg; cmd->done(cmd); } EXPORT_SYMBOL(scsi_finish_command); @@ -844,14 +855,14 @@ EXPORT_SYMBOL(scsi_track_queue_full); */ int scsi_device_get(struct scsi_device *sdev) { - if (sdev->sdev_state == SDEV_DEL || sdev->sdev_state == SDEV_CANCEL) + if (sdev->sdev_state == SDEV_DEL) return -ENXIO; if (!get_device(&sdev->sdev_gendev)) return -ENXIO; - if (!try_module_get(sdev->host->hostt->module)) { - put_device(&sdev->sdev_gendev); - return -ENXIO; - } + /* We can fail this if we're doing SCSI operations + * from module exit (like cache flush) */ + try_module_get(sdev->host->hostt->module); + return 0; } EXPORT_SYMBOL(scsi_device_get); @@ -866,7 +877,14 @@ EXPORT_SYMBOL(scsi_device_get); */ void scsi_device_put(struct scsi_device *sdev) { - module_put(sdev->host->hostt->module); + struct module *module = sdev->host->hostt->module; + +#ifdef CONFIG_MODULE_UNLOAD + /* The module refcount will be zero if scsi_device_get() + * was called from a module removal routine */ + if (module && module_refcount(module) != 0) + module_put(module); +#endif put_device(&sdev->sdev_gendev); } EXPORT_SYMBOL(scsi_device_put); @@ -1108,6 +1126,8 @@ static int __init init_scsi(void) for_each_possible_cpu(i) INIT_LIST_HEAD(&per_cpu(scsi_done_q, i)); + scsi_netlink_init(); + printk(KERN_NOTICE "SCSI subsystem initialized\n"); return 0; @@ -1128,6 +1148,7 @@ cleanup_queue: static void __exit exit_scsi(void) { + scsi_netlink_exit(); scsi_sysfs_unregister(); scsi_exit_sysctl(); scsi_exit_hosts(); diff --git a/drivers/scsi/scsi.h b/drivers/scsi/scsi.h index f51e466893e..d5a55fae60e 100644 --- a/drivers/scsi/scsi.h +++ b/drivers/scsi/scsi.h @@ -20,8 +20,6 @@ #ifndef _SCSI_H #define _SCSI_H -#include <linux/config.h> /* for CONFIG_SCSI_LOGGING */ - #include <scsi/scsi_cmnd.h> #include <scsi/scsi_device.h> #include <scsi/scsi_eh.h> diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 5a5d2af8ee4..9c0f35820e3 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -1,5 +1,4 @@ /* - * linux/kernel/scsi_debug.c * vvvvvvvvvvvvvvvvvvvvvvv Original vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv * Copyright (C) 1992 Eric Youngdale * Simulate a host adapter with 2 disks attached. Do a lot of checking @@ -8,7 +7,9 @@ * ^^^^^^^^^^^^^^^^^^^^^^^ Original ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ * * This version is more generic, simulating a variable number of disk - * (or disk like devices) sharing a common amount of RAM + * (or disk like devices) sharing a common amount of RAM. To be more + * realistic, the simulated devices have the transport attributes of + * SAS disks. * * * For documentation see http://www.torque.net/sg/sdebug26.html @@ -24,7 +25,6 @@ * module options to "modprobe scsi_debug num_tgts=2" [20021221] */ -#include <linux/config.h> #include <linux/module.h> #include <linux/kernel.h> @@ -51,18 +51,22 @@ #include "scsi_logging.h" #include "scsi_debug.h" -#define SCSI_DEBUG_VERSION "1.75" -static const char * scsi_debug_version_date = "20050113"; +#define SCSI_DEBUG_VERSION "1.80" +static const char * scsi_debug_version_date = "20060914"; /* Additional Sense Code (ASC) used */ -#define NO_ADDED_SENSE 0x0 +#define NO_ADDITIONAL_SENSE 0x0 +#define LOGICAL_UNIT_NOT_READY 0x4 #define UNRECOVERED_READ_ERR 0x11 +#define PARAMETER_LIST_LENGTH_ERR 0x1a #define INVALID_OPCODE 0x20 #define ADDR_OUT_OF_RANGE 0x21 #define INVALID_FIELD_IN_CDB 0x24 +#define INVALID_FIELD_IN_PARAM_LIST 0x26 #define POWERON_RESET 0x29 #define SAVING_PARAMS_UNSUP 0x39 -#define THRESHHOLD_EXCEEDED 0x5d +#define THRESHOLD_EXCEEDED 0x5d +#define LOW_POWER_COND_ON 0x5e #define SDEBUG_TAGGED_QUEUING 0 /* 0 | MSG_SIMPLE_TAG | MSG_ORDERED_TAG */ @@ -81,6 +85,10 @@ static const char * scsi_debug_version_date = "20050113"; #define DEF_SCSI_LEVEL 5 /* INQUIRY, byte2 [5->SPC-3] */ #define DEF_PTYPE 0 #define DEF_D_SENSE 0 +#define DEF_NO_LUN_0 0 +#define DEF_VIRTUAL_GB 0 +#define DEF_FAKE_RW 0 +#define DEF_VPD_USE_HOSTNO 1 /* bit mask values for scsi_debug_opts */ #define SCSI_DEBUG_OPT_NOISE 1 @@ -107,6 +115,7 @@ static const char * scsi_debug_version_date = "20050113"; /* If REPORT LUNS has luns >= 256 it can choose "flat space" (value 1) * or "peripheral device" addressing (value 0) */ #define SAM2_LUN_ADDRESS_METHOD 0 +#define SAM2_WLUN_REPORT_LUNS 0xc101 static int scsi_debug_add_host = DEF_NUM_HOST; static int scsi_debug_delay = DEF_DELAY; @@ -119,13 +128,18 @@ static int scsi_debug_opts = DEF_OPTS; static int scsi_debug_scsi_level = DEF_SCSI_LEVEL; static int scsi_debug_ptype = DEF_PTYPE; /* SCSI peripheral type (0==disk) */ static int scsi_debug_dsense = DEF_D_SENSE; +static int scsi_debug_no_lun_0 = DEF_NO_LUN_0; +static int scsi_debug_virtual_gb = DEF_VIRTUAL_GB; +static int scsi_debug_fake_rw = DEF_FAKE_RW; +static int scsi_debug_vpd_use_hostno = DEF_VPD_USE_HOSTNO; static int scsi_debug_cmnd_count = 0; #define DEV_READONLY(TGT) (0) #define DEV_REMOVEABLE(TGT) (0) -static unsigned long sdebug_store_size; /* in bytes */ +static unsigned int sdebug_store_size; /* in bytes */ +static unsigned int sdebug_store_sectors; static sector_t sdebug_capacity; /* in sectors */ /* old BIOS stuff, kernel may get rid of them but some mode sense pages @@ -150,7 +164,9 @@ struct sdebug_dev_info { unsigned int target; unsigned int lun; struct sdebug_host_info *sdbg_host; + unsigned int wlun; char reset; + char stopped; char used; }; @@ -194,11 +210,11 @@ static struct scsi_host_template sdebug_driver_template = { .bios_param = scsi_debug_biosparam, .can_queue = SCSI_DEBUG_CANQUEUE, .this_id = 7, - .sg_tablesize = 64, - .cmd_per_lun = 3, - .max_sectors = 4096, + .sg_tablesize = 256, + .cmd_per_lun = 16, + .max_sectors = 0xffff, .unchecked_isa_dma = 0, - .use_clustering = DISABLE_CLUSTERING, + .use_clustering = ENABLE_CLUSTERING, .module = THIS_MODULE, }; @@ -226,19 +242,32 @@ static struct device_driver sdebug_driverfs_driver = { static const int check_condition_result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; +static unsigned char ctrl_m_pg[] = {0xa, 10, 2, 0, 0, 0, 0, 0, + 0, 0, 0x2, 0x4b}; +static unsigned char iec_m_pg[] = {0x1c, 0xa, 0x08, 0, 0, 0, 0, 0, + 0, 0, 0x0, 0x0}; + /* function declarations */ static int resp_inquiry(struct scsi_cmnd * SCpnt, int target, struct sdebug_dev_info * devip); static int resp_requests(struct scsi_cmnd * SCpnt, struct sdebug_dev_info * devip); +static int resp_start_stop(struct scsi_cmnd * scp, + struct sdebug_dev_info * devip); static int resp_readcap(struct scsi_cmnd * SCpnt, struct sdebug_dev_info * devip); -static int resp_mode_sense(struct scsi_cmnd * SCpnt, int target, +static int resp_readcap16(struct scsi_cmnd * SCpnt, + struct sdebug_dev_info * devip); +static int resp_mode_sense(struct scsi_cmnd * scp, int target, struct sdebug_dev_info * devip); -static int resp_read(struct scsi_cmnd * SCpnt, int upper_blk, int block, - int num, struct sdebug_dev_info * devip); -static int resp_write(struct scsi_cmnd * SCpnt, int upper_blk, int block, - int num, struct sdebug_dev_info * devip); +static int resp_mode_select(struct scsi_cmnd * scp, int mselect6, + struct sdebug_dev_info * devip); +static int resp_log_sense(struct scsi_cmnd * scp, + struct sdebug_dev_info * devip); +static int resp_read(struct scsi_cmnd * SCpnt, unsigned long long lba, + unsigned int num, struct sdebug_dev_info * devip); +static int resp_write(struct scsi_cmnd * SCpnt, unsigned long long lba, + unsigned int num, struct sdebug_dev_info * devip); static int resp_report_luns(struct scsi_cmnd * SCpnt, struct sdebug_dev_info * devip); static int fill_from_dev_buffer(struct scsi_cmnd * scp, unsigned char * arr, @@ -249,8 +278,8 @@ static void timer_intr_handler(unsigned long); static struct sdebug_dev_info * devInfoReg(struct scsi_device * sdev); static void mk_sense_buffer(struct sdebug_dev_info * devip, int key, int asc, int asq); -static int check_reset(struct scsi_cmnd * SCpnt, - struct sdebug_dev_info * devip); +static int check_readiness(struct scsi_cmnd * SCpnt, int reset_only, + struct sdebug_dev_info * devip); static int schedule_resp(struct scsi_cmnd * cmnd, struct sdebug_dev_info * devip, done_funct_t done, int scsi_result, int delta_jiff); @@ -258,9 +287,11 @@ static void __init sdebug_build_parts(unsigned char * ramp); static void __init init_all_queued(void); static void stop_all_queued(void); static int stop_queued_cmnd(struct scsi_cmnd * cmnd); -static int inquiry_evpd_83(unsigned char * arr, int dev_id_num, - const char * dev_id_str, int dev_id_str_len); -static void do_create_driverfs_files(void); +static int inquiry_evpd_83(unsigned char * arr, int target_dev_id, + int dev_id_num, const char * dev_id_str, + int dev_id_str_len); +static int inquiry_evpd_88(unsigned char * arr, int target_dev_id); +static int do_create_driverfs_files(void); static void do_remove_driverfs_files(void); static int sdebug_add_adapter(void); @@ -275,18 +306,22 @@ static int scsi_debug_queuecommand(struct scsi_cmnd * SCpnt, done_funct_t done) { unsigned char *cmd = (unsigned char *) SCpnt->cmnd; - int block, upper_blk, num, k; + int len, k, j; + unsigned int num; + unsigned long long lba; int errsts = 0; - int target = scmd_id(SCpnt); + int target = SCpnt->device->id; struct sdebug_dev_info * devip = NULL; int inj_recovered = 0; + int delay_override = 0; if (done == NULL) return 0; /* assume mid level reprocessing command */ + SCpnt->resid = 0; if ((SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) && cmd) { printk(KERN_INFO "scsi_debug: cmd "); - for (k = 0, num = SCpnt->cmd_len; k < num; ++k) + for (k = 0, len = SCpnt->cmd_len; k < len; ++k) printk("%02x ", (int)cmd[k]); printk("\n"); } @@ -297,7 +332,8 @@ int scsi_debug_queuecommand(struct scsi_cmnd * SCpnt, done_funct_t done) DID_NO_CONNECT << 16, 0); } - if (SCpnt->device->lun >= scsi_debug_max_luns) + if ((SCpnt->device->lun >= scsi_debug_max_luns) && + (SCpnt->device->lun != SAM2_WLUN_REPORT_LUNS)) return schedule_resp(SCpnt, NULL, done, DID_NO_CONNECT << 16, 0); devip = devInfoReg(SCpnt->device); @@ -316,118 +352,154 @@ int scsi_debug_queuecommand(struct scsi_cmnd * SCpnt, done_funct_t done) inj_recovered = 1; /* to reads and writes below */ } + if (devip->wlun) { + switch (*cmd) { + case INQUIRY: + case REQUEST_SENSE: + case TEST_UNIT_READY: + case REPORT_LUNS: + break; /* only allowable wlun commands */ + default: + if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) + printk(KERN_INFO "scsi_debug: Opcode: 0x%x " + "not supported for wlun\n", *cmd); + mk_sense_buffer(devip, ILLEGAL_REQUEST, + INVALID_OPCODE, 0); + errsts = check_condition_result; + return schedule_resp(SCpnt, devip, done, errsts, + 0); + } + } + switch (*cmd) { case INQUIRY: /* mandatory, ignore unit attention */ + delay_override = 1; errsts = resp_inquiry(SCpnt, target, devip); break; case REQUEST_SENSE: /* mandatory, ignore unit attention */ + delay_override = 1; errsts = resp_requests(SCpnt, devip); break; case REZERO_UNIT: /* actually this is REWIND for SSC */ case START_STOP: - errsts = check_reset(SCpnt, devip); + errsts = resp_start_stop(SCpnt, devip); break; case ALLOW_MEDIUM_REMOVAL: - if ((errsts = check_reset(SCpnt, devip))) + if ((errsts = check_readiness(SCpnt, 1, devip))) break; if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) printk(KERN_INFO "scsi_debug: Medium removal %s\n", cmd[4] ? "inhibited" : "enabled"); break; case SEND_DIAGNOSTIC: /* mandatory */ - errsts = check_reset(SCpnt, devip); + errsts = check_readiness(SCpnt, 1, devip); break; case TEST_UNIT_READY: /* mandatory */ - errsts = check_reset(SCpnt, devip); + delay_override = 1; + errsts = check_readiness(SCpnt, 0, devip); break; case RESERVE: - errsts = check_reset(SCpnt, devip); + errsts = check_readiness(SCpnt, 1, devip); break; case RESERVE_10: - errsts = check_reset(SCpnt, devip); + errsts = check_readiness(SCpnt, 1, devip); break; case RELEASE: - errsts = check_reset(SCpnt, devip); + errsts = check_readiness(SCpnt, 1, devip); break; case RELEASE_10: - errsts = check_reset(SCpnt, devip); + errsts = check_readiness(SCpnt, 1, devip); break; case READ_CAPACITY: errsts = resp_readcap(SCpnt, devip); break; + case SERVICE_ACTION_IN: + if (SAI_READ_CAPACITY_16 != cmd[1]) { + mk_sense_buffer(devip, ILLEGAL_REQUEST, + INVALID_OPCODE, 0); + errsts = check_condition_result; + break; + } + errsts = resp_readcap16(SCpnt, devip); + break; case READ_16: case READ_12: case READ_10: case READ_6: - if ((errsts = check_reset(SCpnt, devip))) + if ((errsts = check_readiness(SCpnt, 0, devip))) + break; + if (scsi_debug_fake_rw) break; - upper_blk = 0; if ((*cmd) == READ_16) { - upper_blk = cmd[5] + (cmd[4] << 8) + - (cmd[3] << 16) + (cmd[2] << 24); - block = cmd[9] + (cmd[8] << 8) + - (cmd[7] << 16) + (cmd[6] << 24); + for (lba = 0, j = 0; j < 8; ++j) { + if (j > 0) + lba <<= 8; + lba += cmd[2 + j]; + } num = cmd[13] + (cmd[12] << 8) + (cmd[11] << 16) + (cmd[10] << 24); } else if ((*cmd) == READ_12) { - block = cmd[5] + (cmd[4] << 8) + + lba = cmd[5] + (cmd[4] << 8) + (cmd[3] << 16) + (cmd[2] << 24); num = cmd[9] + (cmd[8] << 8) + (cmd[7] << 16) + (cmd[6] << 24); } else if ((*cmd) == READ_10) { - block = cmd[5] + (cmd[4] << 8) + + lba = cmd[5] + (cmd[4] << 8) + (cmd[3] << 16) + (cmd[2] << 24); num = cmd[8] + (cmd[7] << 8); - } else { - block = cmd[3] + (cmd[2] << 8) + + } else { /* READ (6) */ + lba = cmd[3] + (cmd[2] << 8) + ((cmd[1] & 0x1f) << 16); - num = cmd[4]; + num = (0 == cmd[4]) ? 256 : cmd[4]; } - errsts = resp_read(SCpnt, upper_blk, block, num, devip); + errsts = resp_read(SCpnt, lba, num, devip); if (inj_recovered && (0 == errsts)) { mk_sense_buffer(devip, RECOVERED_ERROR, - THRESHHOLD_EXCEEDED, 0); + THRESHOLD_EXCEEDED, 0); errsts = check_condition_result; } break; case REPORT_LUNS: /* mandatory, ignore unit attention */ + delay_override = 1; errsts = resp_report_luns(SCpnt, devip); break; case VERIFY: /* 10 byte SBC-2 command */ - errsts = check_reset(SCpnt, devip); + errsts = check_readiness(SCpnt, 0, devip); break; case WRITE_16: case WRITE_12: case WRITE_10: case WRITE_6: - if ((errsts = check_reset(SCpnt, devip))) + if ((errsts = check_readiness(SCpnt, 0, devip))) + break; + if (scsi_debug_fake_rw) break; - upper_blk = 0; if ((*cmd) == WRITE_16) { - upper_blk = cmd[5] + (cmd[4] << 8) + - (cmd[3] << 16) + (cmd[2] << 24); - block = cmd[9] + (cmd[8] << 8) + - (cmd[7] << 16) + (cmd[6] << 24); + for (lba = 0, j = 0; j < 8; ++j) { + if (j > 0) + lba <<= 8; + lba += cmd[2 + j]; + } num = cmd[13] + (cmd[12] << 8) + (cmd[11] << 16) + (cmd[10] << 24); } else if ((*cmd) == WRITE_12) { - block = cmd[5] + (cmd[4] << 8) + + lba = cmd[5] + (cmd[4] << 8) + (cmd[3] << 16) + (cmd[2] << 24); num = cmd[9] + (cmd[8] << 8) + (cmd[7] << 16) + (cmd[6] << 24); } else if ((*cmd) == WRITE_10) { - block = cmd[5] + (cmd[4] << 8) + + lba = cmd[5] + (cmd[4] << 8) + (cmd[3] << 16) + (cmd[2] << 24); num = cmd[8] + (cmd[7] << 8); - } else { - block = cmd[3] + (cmd[2] << 8) + + } else { /* WRITE (6) */ + lba = cmd[3] + (cmd[2] << 8) + ((cmd[1] & 0x1f) << 16); - num = cmd[4]; + num = (0 == cmd[4]) ? 256 : cmd[4]; } - errsts = resp_write(SCpnt, upper_blk, block, num, devip); + errsts = resp_write(SCpnt, lba, num, devip); if (inj_recovered && (0 == errsts)) { mk_sense_buffer(devip, RECOVERED_ERROR, - THRESHHOLD_EXCEEDED, 0); + THRESHOLD_EXCEEDED, 0); errsts = check_condition_result; } break; @@ -435,20 +507,31 @@ int scsi_debug_queuecommand(struct scsi_cmnd * SCpnt, done_funct_t done) case MODE_SENSE_10: errsts = resp_mode_sense(SCpnt, target, devip); break; + case MODE_SELECT: + errsts = resp_mode_select(SCpnt, 1, devip); + break; + case MODE_SELECT_10: + errsts = resp_mode_select(SCpnt, 0, devip); + break; + case LOG_SENSE: + errsts = resp_log_sense(SCpnt, devip); + break; case SYNCHRONIZE_CACHE: - errsts = check_reset(SCpnt, devip); + delay_override = 1; + errsts = check_readiness(SCpnt, 0, devip); break; default: if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) printk(KERN_INFO "scsi_debug: Opcode: 0x%x not " "supported\n", *cmd); - if ((errsts = check_reset(SCpnt, devip))) + if ((errsts = check_readiness(SCpnt, 1, devip))) break; /* Unit attention takes precedence */ mk_sense_buffer(devip, ILLEGAL_REQUEST, INVALID_OPCODE, 0); errsts = check_condition_result; break; } - return schedule_resp(SCpnt, devip, done, errsts, scsi_debug_delay); + return schedule_resp(SCpnt, devip, done, errsts, + (delay_override ? 0 : scsi_debug_delay)); } static int scsi_debug_ioctl(struct scsi_device *dev, int cmd, void __user *arg) @@ -460,7 +543,8 @@ static int scsi_debug_ioctl(struct scsi_device *dev, int cmd, void __user *arg) /* return -ENOTTY; // correct return but upsets fdisk */ } -static int check_reset(struct scsi_cmnd * SCpnt, struct sdebug_dev_info * devip) +static int check_readiness(struct scsi_cmnd * SCpnt, int reset_only, + struct sdebug_dev_info * devip) { if (devip->reset) { if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) @@ -470,6 +554,14 @@ static int check_reset(struct scsi_cmnd * SCpnt, struct sdebug_dev_info * devip) mk_sense_buffer(devip, UNIT_ATTENTION, POWERON_RESET, 0); return check_condition_result; } + if ((0 == reset_only) && devip->stopped) { + if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) + printk(KERN_INFO "scsi_debug: Reporting Not " + "ready: initializing command required\n"); + mk_sense_buffer(devip, NOT_READY, LOGICAL_UNIT_NOT_READY, + 0x2); + return check_condition_result; + } return 0; } @@ -493,7 +585,10 @@ static int fill_from_dev_buffer(struct scsi_cmnd * scp, unsigned char * arr, req_len = scp->request_bufflen; act_len = (req_len < arr_len) ? req_len : arr_len; memcpy(scp->request_buffer, arr, act_len); - scp->resid = req_len - act_len; + if (scp->resid) + scp->resid -= act_len; + else + scp->resid = req_len - act_len; return 0; } sgpnt = (struct scatterlist *)scp->request_buffer; @@ -516,7 +611,10 @@ static int fill_from_dev_buffer(struct scsi_cmnd * scp, unsigned char * arr, } req_len += sgpnt->length; } - scp->resid = req_len - act_len; + if (scp->resid) + scp->resid -= act_len; + else + scp->resid = req_len - act_len; return 0; } @@ -567,12 +665,14 @@ static const char * inq_vendor_id = "Linux "; static const char * inq_product_id = "scsi_debug "; static const char * inq_product_rev = "0004"; -static int inquiry_evpd_83(unsigned char * arr, int dev_id_num, - const char * dev_id_str, int dev_id_str_len) +static int inquiry_evpd_83(unsigned char * arr, int target_dev_id, + int dev_id_num, const char * dev_id_str, + int dev_id_str_len) { - int num; + int num, port_a; + char b[32]; - /* Two identification descriptors: */ + port_a = target_dev_id + 1; /* T10 vendor identifier field format (faked) */ arr[0] = 0x2; /* ASCII */ arr[1] = 0x1; @@ -583,25 +683,246 @@ static int inquiry_evpd_83(unsigned char * arr, int dev_id_num, num = 8 + 16 + dev_id_str_len; arr[3] = num; num += 4; - /* NAA IEEE registered identifier (faked) */ - arr[num] = 0x1; /* binary */ - arr[num + 1] = 0x3; - arr[num + 2] = 0x0; - arr[num + 3] = 0x8; - arr[num + 4] = 0x51; /* ieee company id=0x123456 (faked) */ - arr[num + 5] = 0x23; - arr[num + 6] = 0x45; - arr[num + 7] = 0x60; - arr[num + 8] = (dev_id_num >> 24); - arr[num + 9] = (dev_id_num >> 16) & 0xff; - arr[num + 10] = (dev_id_num >> 8) & 0xff; - arr[num + 11] = dev_id_num & 0xff; - return num + 12; + if (dev_id_num >= 0) { + /* NAA-5, Logical unit identifier (binary) */ + arr[num++] = 0x1; /* binary (not necessarily sas) */ + arr[num++] = 0x3; /* PIV=0, lu, naa */ + arr[num++] = 0x0; + arr[num++] = 0x8; + arr[num++] = 0x53; /* naa-5 ieee company id=0x333333 (fake) */ + arr[num++] = 0x33; + arr[num++] = 0x33; + arr[num++] = 0x30; + arr[num++] = (dev_id_num >> 24); + arr[num++] = (dev_id_num >> 16) & 0xff; + arr[num++] = (dev_id_num >> 8) & 0xff; + arr[num++] = dev_id_num & 0xff; + /* Target relative port number */ + arr[num++] = 0x61; /* proto=sas, binary */ + arr[num++] = 0x94; /* PIV=1, target port, rel port */ + arr[num++] = 0x0; /* reserved */ + arr[num++] = 0x4; /* length */ + arr[num++] = 0x0; /* reserved */ + arr[num++] = 0x0; /* reserved */ + arr[num++] = 0x0; + arr[num++] = 0x1; /* relative port A */ + } + /* NAA-5, Target port identifier */ + arr[num++] = 0x61; /* proto=sas, binary */ + arr[num++] = 0x93; /* piv=1, target port, naa */ + arr[num++] = 0x0; + arr[num++] = 0x8; + arr[num++] = 0x52; /* naa-5, company id=0x222222 (fake) */ + arr[num++] = 0x22; + arr[num++] = 0x22; + arr[num++] = 0x20; + arr[num++] = (port_a >> 24); + arr[num++] = (port_a >> 16) & 0xff; + arr[num++] = (port_a >> 8) & 0xff; + arr[num++] = port_a & 0xff; + /* NAA-5, Target device identifier */ + arr[num++] = 0x61; /* proto=sas, binary */ + arr[num++] = 0xa3; /* piv=1, target device, naa */ + arr[num++] = 0x0; + arr[num++] = 0x8; + arr[num++] = 0x52; /* naa-5, company id=0x222222 (fake) */ + arr[num++] = 0x22; + arr[num++] = 0x22; + arr[num++] = 0x20; + arr[num++] = (target_dev_id >> 24); + arr[num++] = (target_dev_id >> 16) & 0xff; + arr[num++] = (target_dev_id >> 8) & 0xff; + arr[num++] = target_dev_id & 0xff; + /* SCSI name string: Target device identifier */ + arr[num++] = 0x63; /* proto=sas, UTF-8 */ + arr[num++] = 0xa8; /* piv=1, target device, SCSI name string */ + arr[num++] = 0x0; + arr[num++] = 24; + memcpy(arr + num, "naa.52222220", 12); + num += 12; + snprintf(b, sizeof(b), "%08X", target_dev_id); + memcpy(arr + num, b, 8); + num += 8; + memset(arr + num, 0, 4); + num += 4; + return num; +} + + +static unsigned char vpd84_data[] = { +/* from 4th byte */ 0x22,0x22,0x22,0x0,0xbb,0x0, + 0x22,0x22,0x22,0x0,0xbb,0x1, + 0x22,0x22,0x22,0x0,0xbb,0x2, +}; + +static int inquiry_evpd_84(unsigned char * arr) +{ + memcpy(arr, vpd84_data, sizeof(vpd84_data)); + return sizeof(vpd84_data); +} + +static int inquiry_evpd_85(unsigned char * arr) +{ + int num = 0; + const char * na1 = "https://www.kernel.org/config"; + const char * na2 = "http://www.kernel.org/log"; + int plen, olen; + + arr[num++] = 0x1; /* lu, storage config */ + arr[num++] = 0x0; /* reserved */ + arr[num++] = 0x0; + olen = strlen(na1); + plen = olen + 1; + if (plen % 4) + plen = ((plen / 4) + 1) * 4; + arr[num++] = plen; /* length, null termianted, padded */ + memcpy(arr + num, na1, olen); + memset(arr + num + olen, 0, plen - olen); + num += plen; + + arr[num++] = 0x4; /* lu, logging */ + arr[num++] = 0x0; /* reserved */ + arr[num++] = 0x0; + olen = strlen(na2); + plen = olen + 1; + if (plen % 4) + plen = ((plen / 4) + 1) * 4; + arr[num++] = plen; /* length, null terminated, padded */ + memcpy(arr + num, na2, olen); + memset(arr + num + olen, 0, plen - olen); + num += plen; + + return num; +} + +/* SCSI ports VPD page */ +static int inquiry_evpd_88(unsigned char * arr, int target_dev_id) +{ + int num = 0; + int port_a, port_b; + + port_a = target_dev_id + 1; + port_b = port_a + 1; + arr[num++] = 0x0; /* reserved */ + arr[num++] = 0x0; /* reserved */ + arr[num++] = 0x0; + arr[num++] = 0x1; /* relative port 1 (primary) */ + memset(arr + num, 0, 6); + num += 6; + arr[num++] = 0x0; + arr[num++] = 12; /* length tp descriptor */ + /* naa-5 target port identifier (A) */ + arr[num++] = 0x61; /* proto=sas, binary */ + arr[num++] = 0x93; /* PIV=1, target port, NAA */ + arr[num++] = 0x0; /* reserved */ + arr[num++] = 0x8; /* length */ + arr[num++] = 0x52; /* NAA-5, company_id=0x222222 (fake) */ + arr[num++] = 0x22; + arr[num++] = 0x22; + arr[num++] = 0x20; + arr[num++] = (port_a >> 24); + arr[num++] = (port_a >> 16) & 0xff; + arr[num++] = (port_a >> 8) & 0xff; + arr[num++] = port_a & 0xff; + + arr[num++] = 0x0; /* reserved */ + arr[num++] = 0x0; /* reserved */ + arr[num++] = 0x0; + arr[num++] = 0x2; /* relative port 2 (secondary) */ + memset(arr + num, 0, 6); + num += 6; + arr[num++] = 0x0; + arr[num++] = 12; /* length tp descriptor */ + /* naa-5 target port identifier (B) */ + arr[num++] = 0x61; /* proto=sas, binary */ + arr[num++] = 0x93; /* PIV=1, target port, NAA */ + arr[num++] = 0x0; /* reserved */ + arr[num++] = 0x8; /* length */ + arr[num++] = 0x52; /* NAA-5, company_id=0x222222 (fake) */ + arr[num++] = 0x22; + arr[num++] = 0x22; + arr[num++] = 0x20; + arr[num++] = (port_b >> 24); + arr[num++] = (port_b >> 16) & 0xff; + arr[num++] = (port_b >> 8) & 0xff; + arr[num++] = port_b & 0xff; + + return num; +} + + +static unsigned char vpd89_data[] = { +/* from 4th byte */ 0,0,0,0, +'l','i','n','u','x',' ',' ',' ', +'S','A','T',' ','s','c','s','i','_','d','e','b','u','g',' ',' ', +'1','2','3','4', +0x34,0,0,0,1,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0, +0xec,0,0,0, +0x5a,0xc,0xff,0x3f,0x37,0xc8,0x10,0,0,0,0,0,0x3f,0,0,0, +0,0,0,0,0x58,0x58,0x58,0x58,0x58,0x58,0x58,0x58,0x20,0x20,0x20,0x20, +0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0,0,0,0x40,0x4,0,0x2e,0x33, +0x38,0x31,0x20,0x20,0x20,0x20,0x54,0x53,0x38,0x33,0x30,0x30,0x33,0x31, +0x53,0x41, +0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20, +0x20,0x20, +0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20, +0x10,0x80, +0,0,0,0x2f,0,0,0,0x2,0,0x2,0x7,0,0xff,0xff,0x1,0, +0x3f,0,0xc1,0xff,0x3e,0,0x10,0x1,0xb0,0xf8,0x50,0x9,0,0,0x7,0, +0x3,0,0x78,0,0x78,0,0xf0,0,0x78,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0x2,0,0,0,0,0,0,0, +0x7e,0,0x1b,0,0x6b,0x34,0x1,0x7d,0x3,0x40,0x69,0x34,0x1,0x3c,0x3,0x40, +0x7f,0x40,0,0,0,0,0xfe,0xfe,0,0,0,0,0,0xfe,0,0, +0,0,0,0,0,0,0,0,0xb0,0xf8,0x50,0x9,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0x1,0,0xb0,0xf8,0x50,0x9,0xb0,0xf8,0x50,0x9,0x20,0x20,0x2,0,0xb6,0x42, +0,0x80,0x8a,0,0x6,0x3c,0xa,0x3c,0xff,0xff,0xc6,0x7,0,0x1,0,0x8, +0xf0,0xf,0,0x10,0x2,0,0x30,0,0,0,0,0,0,0,0x6,0xfe, +0,0,0x2,0,0x50,0,0x8a,0,0x4f,0x95,0,0,0x21,0,0xb,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, +0,0,0,0,0,0,0,0,0,0,0,0,0,0,0xa5,0x51, +}; + +static int inquiry_evpd_89(unsigned char * arr) +{ + memcpy(arr, vpd89_data, sizeof(vpd89_data)); + return sizeof(vpd89_data); +} + + +static unsigned char vpdb0_data[] = { + /* from 4th byte */ 0,0,0,4, + 0,0,0x4,0, + 0,0,0,64, +}; + +static int inquiry_evpd_b0(unsigned char * arr) +{ + memcpy(arr, vpdb0_data, sizeof(vpdb0_data)); + if (sdebug_store_sectors > 0x400) { + arr[4] = (sdebug_store_sectors >> 24) & 0xff; + arr[5] = (sdebug_store_sectors >> 16) & 0xff; + arr[6] = (sdebug_store_sectors >> 8) & 0xff; + arr[7] = sdebug_store_sectors & 0xff; + } + return sizeof(vpdb0_data); } #define SDEBUG_LONG_INQ_SZ 96 -#define SDEBUG_MAX_INQ_ARR_SZ 128 +#define SDEBUG_MAX_INQ_ARR_SZ 584 static int resp_inquiry(struct scsi_cmnd * scp, int target, struct sdebug_dev_info * devip) @@ -609,64 +930,115 @@ static int resp_inquiry(struct scsi_cmnd * scp, int target, unsigned char pq_pdt; unsigned char arr[SDEBUG_MAX_INQ_ARR_SZ]; unsigned char *cmd = (unsigned char *)scp->cmnd; - int alloc_len; + int alloc_len, n; alloc_len = (cmd[3] << 8) + cmd[4]; memset(arr, 0, SDEBUG_MAX_INQ_ARR_SZ); - pq_pdt = (scsi_debug_ptype & 0x1f); + if (devip->wlun) + pq_pdt = 0x1e; /* present, wlun */ + else if (scsi_debug_no_lun_0 && (0 == devip->lun)) + pq_pdt = 0x7f; /* not present, no device type */ + else + pq_pdt = (scsi_debug_ptype & 0x1f); arr[0] = pq_pdt; if (0x2 & cmd[1]) { /* CMDDT bit set */ mk_sense_buffer(devip, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB, 0); return check_condition_result; } else if (0x1 & cmd[1]) { /* EVPD bit set */ - int dev_id_num, len; - char dev_id_str[6]; + int lu_id_num, target_dev_id, len; + char lu_id_str[6]; + int host_no = devip->sdbg_host->shost->host_no; - dev_id_num = ((devip->sdbg_host->shost->host_no + 1) * 2000) + - (devip->target * 1000) + devip->lun; - len = scnprintf(dev_id_str, 6, "%d", dev_id_num); + if (0 == scsi_debug_vpd_use_hostno) + host_no = 0; + lu_id_num = devip->wlun ? -1 : (((host_no + 1) * 2000) + + (devip->target * 1000) + devip->lun); + target_dev_id = ((host_no + 1) * 2000) + + (devip->target * 1000) - 3; + len = scnprintf(lu_id_str, 6, "%d", lu_id_num); if (0 == cmd[2]) { /* supported vital product data pages */ - arr[3] = 3; - arr[4] = 0x0; /* this page */ - arr[5] = 0x80; /* unit serial number */ - arr[6] = 0x83; /* device identification */ + arr[1] = cmd[2]; /*sanity */ + n = 4; + arr[n++] = 0x0; /* this page */ + arr[n++] = 0x80; /* unit serial number */ + arr[n++] = 0x83; /* device identification */ + arr[n++] = 0x84; /* software interface ident. */ + arr[n++] = 0x85; /* management network addresses */ + arr[n++] = 0x86; /* extended inquiry */ + arr[n++] = 0x87; /* mode page policy */ + arr[n++] = 0x88; /* SCSI ports */ + arr[n++] = 0x89; /* ATA information */ + arr[n++] = 0xb0; /* Block limits (SBC) */ + arr[3] = n - 4; /* number of supported VPD pages */ } else if (0x80 == cmd[2]) { /* unit serial number */ - arr[1] = 0x80; + arr[1] = cmd[2]; /*sanity */ arr[3] = len; - memcpy(&arr[4], dev_id_str, len); + memcpy(&arr[4], lu_id_str, len); } else if (0x83 == cmd[2]) { /* device identification */ - arr[1] = 0x83; - arr[3] = inquiry_evpd_83(&arr[4], dev_id_num, - dev_id_str, len); + arr[1] = cmd[2]; /*sanity */ + arr[3] = inquiry_evpd_83(&arr[4], target_dev_id, + lu_id_num, lu_id_str, len); + } else if (0x84 == cmd[2]) { /* Software interface ident. */ + arr[1] = cmd[2]; /*sanity */ + arr[3] = inquiry_evpd_84(&arr[4]); + } else if (0x85 == cmd[2]) { /* Management network addresses */ + arr[1] = cmd[2]; /*sanity */ + arr[3] = inquiry_evpd_85(&arr[4]); + } else if (0x86 == cmd[2]) { /* extended inquiry */ + arr[1] = cmd[2]; /*sanity */ + arr[3] = 0x3c; /* number of following entries */ + arr[4] = 0x0; /* no protection stuff */ + arr[5] = 0x7; /* head of q, ordered + simple q's */ + } else if (0x87 == cmd[2]) { /* mode page policy */ + arr[1] = cmd[2]; /*sanity */ + arr[3] = 0x8; /* number of following entries */ + arr[4] = 0x2; /* disconnect-reconnect mp */ + arr[6] = 0x80; /* mlus, shared */ + arr[8] = 0x18; /* protocol specific lu */ + arr[10] = 0x82; /* mlus, per initiator port */ + } else if (0x88 == cmd[2]) { /* SCSI Ports */ + arr[1] = cmd[2]; /*sanity */ + arr[3] = inquiry_evpd_88(&arr[4], target_dev_id); + } else if (0x89 == cmd[2]) { /* ATA information */ + arr[1] = cmd[2]; /*sanity */ + n = inquiry_evpd_89(&arr[4]); + arr[2] = (n >> 8); + arr[3] = (n & 0xff); + } else if (0xb0 == cmd[2]) { /* Block limits (SBC) */ + arr[1] = cmd[2]; /*sanity */ + arr[3] = inquiry_evpd_b0(&arr[4]); } else { /* Illegal request, invalid field in cdb */ mk_sense_buffer(devip, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB, 0); return check_condition_result; } + len = min(((arr[2] << 8) + arr[3]) + 4, alloc_len); return fill_from_dev_buffer(scp, arr, - min(alloc_len, SDEBUG_MAX_INQ_ARR_SZ)); + min(len, SDEBUG_MAX_INQ_ARR_SZ)); } /* drops through here for a standard inquiry */ arr[1] = DEV_REMOVEABLE(target) ? 0x80 : 0; /* Removable disk */ arr[2] = scsi_debug_scsi_level; arr[3] = 2; /* response_data_format==2 */ arr[4] = SDEBUG_LONG_INQ_SZ - 5; - arr[6] = 0x1; /* claim: ADDR16 */ + arr[6] = 0x10; /* claim: MultiP */ /* arr[6] |= 0x40; ... claim: EncServ (enclosure services) */ - arr[7] = 0x3a; /* claim: WBUS16, SYNC, LINKED + CMDQUE */ + arr[7] = 0xa; /* claim: LINKED + CMDQUE */ memcpy(&arr[8], inq_vendor_id, 8); memcpy(&arr[16], inq_product_id, 16); memcpy(&arr[32], inq_product_rev, 4); /* version descriptors (2 bytes each) follow */ - arr[58] = 0x0; arr[59] = 0x40; /* SAM-2 */ - arr[60] = 0x3; arr[61] = 0x0; /* SPC-3 */ + arr[58] = 0x0; arr[59] = 0x77; /* SAM-3 ANSI */ + arr[60] = 0x3; arr[61] = 0x14; /* SPC-3 ANSI */ + n = 62; if (scsi_debug_ptype == 0) { - arr[62] = 0x1; arr[63] = 0x80; /* SBC */ + arr[n++] = 0x3; arr[n++] = 0x3d; /* SBC-2 ANSI */ } else if (scsi_debug_ptype == 1) { - arr[62] = 0x2; arr[63] = 0x00; /* SSC */ + arr[n++] = 0x3; arr[n++] = 0x60; /* SSC-2 no version */ } + arr[n++] = 0xc; arr[n++] = 0xf; /* SAS-1.1 rev 10 */ return fill_from_dev_buffer(scp, arr, min(alloc_len, SDEBUG_LONG_INQ_SZ)); } @@ -677,46 +1049,128 @@ static int resp_requests(struct scsi_cmnd * scp, unsigned char * sbuff; unsigned char *cmd = (unsigned char *)scp->cmnd; unsigned char arr[SDEBUG_SENSE_LEN]; + int want_dsense; int len = 18; - memset(arr, 0, SDEBUG_SENSE_LEN); + memset(arr, 0, sizeof(arr)); if (devip->reset == 1) - mk_sense_buffer(devip, 0, NO_ADDED_SENSE, 0); + mk_sense_buffer(devip, 0, NO_ADDITIONAL_SENSE, 0); + want_dsense = !!(cmd[1] & 1) || scsi_debug_dsense; sbuff = devip->sense_buff; - if ((cmd[1] & 1) && (! scsi_debug_dsense)) { - /* DESC bit set and sense_buff in fixed format */ - arr[0] = 0x72; - arr[1] = sbuff[2]; /* sense key */ - arr[2] = sbuff[12]; /* asc */ - arr[3] = sbuff[13]; /* ascq */ - len = 8; - } else + if ((iec_m_pg[2] & 0x4) && (6 == (iec_m_pg[3] & 0xf))) { + if (want_dsense) { + arr[0] = 0x72; + arr[1] = 0x0; /* NO_SENSE in sense_key */ + arr[2] = THRESHOLD_EXCEEDED; + arr[3] = 0xff; /* TEST set and MRIE==6 */ + } else { + arr[0] = 0x70; + arr[2] = 0x0; /* NO_SENSE in sense_key */ + arr[7] = 0xa; /* 18 byte sense buffer */ + arr[12] = THRESHOLD_EXCEEDED; + arr[13] = 0xff; /* TEST set and MRIE==6 */ + } + } else { memcpy(arr, sbuff, SDEBUG_SENSE_LEN); - mk_sense_buffer(devip, 0, NO_ADDED_SENSE, 0); + if ((cmd[1] & 1) && (! scsi_debug_dsense)) { + /* DESC bit set and sense_buff in fixed format */ + memset(arr, 0, sizeof(arr)); + arr[0] = 0x72; + arr[1] = sbuff[2]; /* sense key */ + arr[2] = sbuff[12]; /* asc */ + arr[3] = sbuff[13]; /* ascq */ + len = 8; + } + } + mk_sense_buffer(devip, 0, NO_ADDITIONAL_SENSE, 0); return fill_from_dev_buffer(scp, arr, len); } +static int resp_start_stop(struct scsi_cmnd * scp, + struct sdebug_dev_info * devip) +{ + unsigned char *cmd = (unsigned char *)scp->cmnd; + int power_cond, errsts, start; + + if ((errsts = check_readiness(scp, 1, devip))) + return errsts; + power_cond = (cmd[4] & 0xf0) >> 4; + if (power_cond) { + mk_sense_buffer(devip, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB, + 0); + return check_condition_result; + } + start = cmd[4] & 1; + if (start == devip->stopped) + devip->stopped = !start; + return 0; +} + #define SDEBUG_READCAP_ARR_SZ 8 static int resp_readcap(struct scsi_cmnd * scp, struct sdebug_dev_info * devip) { unsigned char arr[SDEBUG_READCAP_ARR_SZ]; - unsigned long capac; + unsigned int capac; int errsts; - if ((errsts = check_reset(scp, devip))) + if ((errsts = check_readiness(scp, 1, devip))) return errsts; + /* following just in case virtual_gb changed */ + if (scsi_debug_virtual_gb > 0) { + sdebug_capacity = 2048 * 1024; + sdebug_capacity *= scsi_debug_virtual_gb; + } else + sdebug_capacity = sdebug_store_sectors; memset(arr, 0, SDEBUG_READCAP_ARR_SZ); - capac = (unsigned long)sdebug_capacity - 1; - arr[0] = (capac >> 24); - arr[1] = (capac >> 16) & 0xff; - arr[2] = (capac >> 8) & 0xff; - arr[3] = capac & 0xff; + if (sdebug_capacity < 0xffffffff) { + capac = (unsigned int)sdebug_capacity - 1; + arr[0] = (capac >> 24); + arr[1] = (capac >> 16) & 0xff; + arr[2] = (capac >> 8) & 0xff; + arr[3] = capac & 0xff; + } else { + arr[0] = 0xff; + arr[1] = 0xff; + arr[2] = 0xff; + arr[3] = 0xff; + } arr[6] = (SECT_SIZE_PER(target) >> 8) & 0xff; arr[7] = SECT_SIZE_PER(target) & 0xff; return fill_from_dev_buffer(scp, arr, SDEBUG_READCAP_ARR_SZ); } +#define SDEBUG_READCAP16_ARR_SZ 32 +static int resp_readcap16(struct scsi_cmnd * scp, + struct sdebug_dev_info * devip) +{ + unsigned char *cmd = (unsigned char *)scp->cmnd; + unsigned char arr[SDEBUG_READCAP16_ARR_SZ]; + unsigned long long capac; + int errsts, k, alloc_len; + + if ((errsts = check_readiness(scp, 1, devip))) + return errsts; + alloc_len = ((cmd[10] << 24) + (cmd[11] << 16) + (cmd[12] << 8) + + cmd[13]); + /* following just in case virtual_gb changed */ + if (scsi_debug_virtual_gb > 0) { + sdebug_capacity = 2048 * 1024; + sdebug_capacity *= scsi_debug_virtual_gb; + } else + sdebug_capacity = sdebug_store_sectors; + memset(arr, 0, SDEBUG_READCAP16_ARR_SZ); + capac = sdebug_capacity - 1; + for (k = 0; k < 8; ++k, capac >>= 8) + arr[7 - k] = capac & 0xff; + arr[8] = (SECT_SIZE_PER(target) >> 24) & 0xff; + arr[9] = (SECT_SIZE_PER(target) >> 16) & 0xff; + arr[10] = (SECT_SIZE_PER(target) >> 8) & 0xff; + arr[11] = SECT_SIZE_PER(target) & 0xff; + return fill_from_dev_buffer(scp, arr, + min(alloc_len, SDEBUG_READCAP16_ARR_SZ)); +} + /* <<Following mode page info copied from ST318451LW>> */ static int resp_err_recov_pg(unsigned char * p, int pcontrol, int target) @@ -772,47 +1226,123 @@ static int resp_caching_pg(unsigned char * p, int pcontrol, int target) static int resp_ctrl_m_pg(unsigned char * p, int pcontrol, int target) { /* Control mode page for mode_sense */ - unsigned char ctrl_m_pg[] = {0xa, 10, 2, 0, 0, 0, 0, 0, + unsigned char ch_ctrl_m_pg[] = {/* 0xa, 10, */ 0x6, 0, 0, 0, 0, 0, + 0, 0, 0, 0}; + unsigned char d_ctrl_m_pg[] = {0xa, 10, 2, 0, 0, 0, 0, 0, 0, 0, 0x2, 0x4b}; if (scsi_debug_dsense) ctrl_m_pg[2] |= 0x4; + else + ctrl_m_pg[2] &= ~0x4; memcpy(p, ctrl_m_pg, sizeof(ctrl_m_pg)); if (1 == pcontrol) - memset(p + 2, 0, sizeof(ctrl_m_pg) - 2); + memcpy(p + 2, ch_ctrl_m_pg, sizeof(ch_ctrl_m_pg)); + else if (2 == pcontrol) + memcpy(p, d_ctrl_m_pg, sizeof(d_ctrl_m_pg)); return sizeof(ctrl_m_pg); } + static int resp_iec_m_pg(unsigned char * p, int pcontrol, int target) { /* Informational Exceptions control mode page for mode_sense */ - unsigned char iec_m_pg[] = {0x1c, 0xa, 0x08, 0, 0, 0, 0, 0, - 0, 0, 0x0, 0x0}; + unsigned char ch_iec_m_pg[] = {/* 0x1c, 0xa, */ 0x4, 0xf, 0, 0, 0, 0, + 0, 0, 0x0, 0x0}; + unsigned char d_iec_m_pg[] = {0x1c, 0xa, 0x08, 0, 0, 0, 0, 0, + 0, 0, 0x0, 0x0}; + memcpy(p, iec_m_pg, sizeof(iec_m_pg)); if (1 == pcontrol) - memset(p + 2, 0, sizeof(iec_m_pg) - 2); + memcpy(p + 2, ch_iec_m_pg, sizeof(ch_iec_m_pg)); + else if (2 == pcontrol) + memcpy(p, d_iec_m_pg, sizeof(d_iec_m_pg)); return sizeof(iec_m_pg); } +static int resp_sas_sf_m_pg(unsigned char * p, int pcontrol, int target) +{ /* SAS SSP mode page - short format for mode_sense */ + unsigned char sas_sf_m_pg[] = {0x19, 0x6, + 0x6, 0x0, 0x7, 0xd0, 0x0, 0x0}; + + memcpy(p, sas_sf_m_pg, sizeof(sas_sf_m_pg)); + if (1 == pcontrol) + memset(p + 2, 0, sizeof(sas_sf_m_pg) - 2); + return sizeof(sas_sf_m_pg); +} + + +static int resp_sas_pcd_m_spg(unsigned char * p, int pcontrol, int target, + int target_dev_id) +{ /* SAS phy control and discover mode page for mode_sense */ + unsigned char sas_pcd_m_pg[] = {0x59, 0x1, 0, 0x64, 0, 0x6, 0, 2, + 0, 0, 0, 0, 0x10, 0x9, 0x8, 0x0, + 0x52, 0x22, 0x22, 0x20, 0x0, 0x0, 0x0, 0x0, + 0x51, 0x11, 0x11, 0x10, 0x0, 0x0, 0x0, 0x1, + 0x2, 0, 0, 0, 0, 0, 0, 0, + 0x88, 0x99, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 1, 0, 0, 0x10, 0x9, 0x8, 0x0, + 0x52, 0x22, 0x22, 0x20, 0x0, 0x0, 0x0, 0x0, + 0x51, 0x11, 0x11, 0x10, 0x0, 0x0, 0x0, 0x1, + 0x3, 0, 0, 0, 0, 0, 0, 0, + 0x88, 0x99, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + }; + int port_a, port_b; + + port_a = target_dev_id + 1; + port_b = port_a + 1; + memcpy(p, sas_pcd_m_pg, sizeof(sas_pcd_m_pg)); + p[20] = (port_a >> 24); + p[21] = (port_a >> 16) & 0xff; + p[22] = (port_a >> 8) & 0xff; + p[23] = port_a & 0xff; + p[48 + 20] = (port_b >> 24); + p[48 + 21] = (port_b >> 16) & 0xff; + p[48 + 22] = (port_b >> 8) & 0xff; + p[48 + 23] = port_b & 0xff; + if (1 == pcontrol) + memset(p + 4, 0, sizeof(sas_pcd_m_pg) - 4); + return sizeof(sas_pcd_m_pg); +} + +static int resp_sas_sha_m_spg(unsigned char * p, int pcontrol) +{ /* SAS SSP shared protocol specific port mode subpage */ + unsigned char sas_sha_m_pg[] = {0x59, 0x2, 0, 0xc, 0, 0x6, 0x10, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + }; + + memcpy(p, sas_sha_m_pg, sizeof(sas_sha_m_pg)); + if (1 == pcontrol) + memset(p + 4, 0, sizeof(sas_sha_m_pg) - 4); + return sizeof(sas_sha_m_pg); +} + #define SDEBUG_MAX_MSENSE_SZ 256 static int resp_mode_sense(struct scsi_cmnd * scp, int target, struct sdebug_dev_info * devip) { - unsigned char dbd; - int pcontrol, pcode, subpcode; + unsigned char dbd, llbaa; + int pcontrol, pcode, subpcode, bd_len; unsigned char dev_spec; - int alloc_len, msense_6, offset, len, errsts; + int k, alloc_len, msense_6, offset, len, errsts, target_dev_id; unsigned char * ap; unsigned char arr[SDEBUG_MAX_MSENSE_SZ]; unsigned char *cmd = (unsigned char *)scp->cmnd; - if ((errsts = check_reset(scp, devip))) + if ((errsts = check_readiness(scp, 1, devip))) return errsts; - dbd = cmd[1] & 0x8; + dbd = !!(cmd[1] & 0x8); pcontrol = (cmd[2] & 0xc0) >> 6; pcode = cmd[2] & 0x3f; subpcode = cmd[3]; msense_6 = (MODE_SENSE == cmd[0]); + llbaa = msense_6 ? 0 : !!(cmd[1] & 0x10); + if ((0 == scsi_debug_ptype) && (0 == dbd)) + bd_len = llbaa ? 16 : 8; + else + bd_len = 0; alloc_len = msense_6 ? cmd[4] : ((cmd[7] << 8) | cmd[8]); memset(arr, 0, SDEBUG_MAX_MSENSE_SZ); if (0x3 == pcontrol) { /* Saving values not supported */ @@ -820,17 +1350,63 @@ static int resp_mode_sense(struct scsi_cmnd * scp, int target, 0); return check_condition_result; } - dev_spec = DEV_READONLY(target) ? 0x80 : 0x0; + target_dev_id = ((devip->sdbg_host->shost->host_no + 1) * 2000) + + (devip->target * 1000) - 3; + /* set DPOFUA bit for disks */ + if (0 == scsi_debug_ptype) + dev_spec = (DEV_READONLY(target) ? 0x80 : 0x0) | 0x10; + else + dev_spec = 0x0; if (msense_6) { arr[2] = dev_spec; + arr[3] = bd_len; offset = 4; } else { arr[3] = dev_spec; + if (16 == bd_len) + arr[4] = 0x1; /* set LONGLBA bit */ + arr[7] = bd_len; /* assume 255 or less */ offset = 8; } ap = arr + offset; + if ((bd_len > 0) && (0 == sdebug_capacity)) { + if (scsi_debug_virtual_gb > 0) { + sdebug_capacity = 2048 * 1024; + sdebug_capacity *= scsi_debug_virtual_gb; + } else + sdebug_capacity = sdebug_store_sectors; + } + if (8 == bd_len) { + if (sdebug_capacity > 0xfffffffe) { + ap[0] = 0xff; + ap[1] = 0xff; + ap[2] = 0xff; + ap[3] = 0xff; + } else { + ap[0] = (sdebug_capacity >> 24) & 0xff; + ap[1] = (sdebug_capacity >> 16) & 0xff; + ap[2] = (sdebug_capacity >> 8) & 0xff; + ap[3] = sdebug_capacity & 0xff; + } + ap[6] = (SECT_SIZE_PER(target) >> 8) & 0xff; + ap[7] = SECT_SIZE_PER(target) & 0xff; + offset += bd_len; + ap = arr + offset; + } else if (16 == bd_len) { + unsigned long long capac = sdebug_capacity; + + for (k = 0; k < 8; ++k, capac >>= 8) + ap[7 - k] = capac & 0xff; + ap[12] = (SECT_SIZE_PER(target) >> 24) & 0xff; + ap[13] = (SECT_SIZE_PER(target) >> 16) & 0xff; + ap[14] = (SECT_SIZE_PER(target) >> 8) & 0xff; + ap[15] = SECT_SIZE_PER(target) & 0xff; + offset += bd_len; + ap = arr + offset; + } - if (0 != subpcode) { /* TODO: Control Extension page */ + if ((subpcode > 0x0) && (subpcode < 0xff) && (0x19 != pcode)) { + /* TODO: Control Extension page */ mk_sense_buffer(devip, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB, 0); return check_condition_result; @@ -856,17 +1432,45 @@ static int resp_mode_sense(struct scsi_cmnd * scp, int target, len = resp_ctrl_m_pg(ap, pcontrol, target); offset += len; break; + case 0x19: /* if spc==1 then sas phy, control+discover */ + if ((subpcode > 0x2) && (subpcode < 0xff)) { + mk_sense_buffer(devip, ILLEGAL_REQUEST, + INVALID_FIELD_IN_CDB, 0); + return check_condition_result; + } + len = 0; + if ((0x0 == subpcode) || (0xff == subpcode)) + len += resp_sas_sf_m_pg(ap + len, pcontrol, target); + if ((0x1 == subpcode) || (0xff == subpcode)) + len += resp_sas_pcd_m_spg(ap + len, pcontrol, target, + target_dev_id); + if ((0x2 == subpcode) || (0xff == subpcode)) + len += resp_sas_sha_m_spg(ap + len, pcontrol); + offset += len; + break; case 0x1c: /* Informational Exceptions Mode page, all devices */ len = resp_iec_m_pg(ap, pcontrol, target); offset += len; break; case 0x3f: /* Read all Mode pages */ - len = resp_err_recov_pg(ap, pcontrol, target); - len += resp_disconnect_pg(ap + len, pcontrol, target); - len += resp_format_pg(ap + len, pcontrol, target); - len += resp_caching_pg(ap + len, pcontrol, target); - len += resp_ctrl_m_pg(ap + len, pcontrol, target); - len += resp_iec_m_pg(ap + len, pcontrol, target); + if ((0 == subpcode) || (0xff == subpcode)) { + len = resp_err_recov_pg(ap, pcontrol, target); + len += resp_disconnect_pg(ap + len, pcontrol, target); + len += resp_format_pg(ap + len, pcontrol, target); + len += resp_caching_pg(ap + len, pcontrol, target); + len += resp_ctrl_m_pg(ap + len, pcontrol, target); + len += resp_sas_sf_m_pg(ap + len, pcontrol, target); + if (0xff == subpcode) { + len += resp_sas_pcd_m_spg(ap + len, pcontrol, + target, target_dev_id); + len += resp_sas_sha_m_spg(ap + len, pcontrol); + } + len += resp_iec_m_pg(ap + len, pcontrol, target); + } else { + mk_sense_buffer(devip, ILLEGAL_REQUEST, + INVALID_FIELD_IN_CDB, 0); + return check_condition_result; + } offset += len; break; default: @@ -883,71 +1487,314 @@ static int resp_mode_sense(struct scsi_cmnd * scp, int target, return fill_from_dev_buffer(scp, arr, min(alloc_len, offset)); } -static int resp_read(struct scsi_cmnd * SCpnt, int upper_blk, int block, - int num, struct sdebug_dev_info * devip) +#define SDEBUG_MAX_MSELECT_SZ 512 + +static int resp_mode_select(struct scsi_cmnd * scp, int mselect6, + struct sdebug_dev_info * devip) +{ + int pf, sp, ps, md_len, bd_len, off, spf, pg_len; + int param_len, res, errsts, mpage; + unsigned char arr[SDEBUG_MAX_MSELECT_SZ]; + unsigned char *cmd = (unsigned char *)scp->cmnd; + + if ((errsts = check_readiness(scp, 1, devip))) + return errsts; + memset(arr, 0, sizeof(arr)); + pf = cmd[1] & 0x10; + sp = cmd[1] & 0x1; + param_len = mselect6 ? cmd[4] : ((cmd[7] << 8) + cmd[8]); + if ((0 == pf) || sp || (param_len > SDEBUG_MAX_MSELECT_SZ)) { + mk_sense_buffer(devip, ILLEGAL_REQUEST, + INVALID_FIELD_IN_CDB, 0); + return check_condition_result; + } + res = fetch_to_dev_buffer(scp, arr, param_len); + if (-1 == res) + return (DID_ERROR << 16); + else if ((res < param_len) && + (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)) + printk(KERN_INFO "scsi_debug: mode_select: cdb indicated=%d, " + " IO sent=%d bytes\n", param_len, res); + md_len = mselect6 ? (arr[0] + 1) : ((arr[0] << 8) + arr[1] + 2); + bd_len = mselect6 ? arr[3] : ((arr[6] << 8) + arr[7]); + if (md_len > 2) { + mk_sense_buffer(devip, ILLEGAL_REQUEST, + INVALID_FIELD_IN_PARAM_LIST, 0); + return check_condition_result; + } + off = bd_len + (mselect6 ? 4 : 8); + mpage = arr[off] & 0x3f; + ps = !!(arr[off] & 0x80); + if (ps) { + mk_sense_buffer(devip, ILLEGAL_REQUEST, + INVALID_FIELD_IN_PARAM_LIST, 0); + return check_condition_result; + } + spf = !!(arr[off] & 0x40); + pg_len = spf ? ((arr[off + 2] << 8) + arr[off + 3] + 4) : + (arr[off + 1] + 2); + if ((pg_len + off) > param_len) { + mk_sense_buffer(devip, ILLEGAL_REQUEST, + PARAMETER_LIST_LENGTH_ERR, 0); + return check_condition_result; + } + switch (mpage) { + case 0xa: /* Control Mode page */ + if (ctrl_m_pg[1] == arr[off + 1]) { + memcpy(ctrl_m_pg + 2, arr + off + 2, + sizeof(ctrl_m_pg) - 2); + scsi_debug_dsense = !!(ctrl_m_pg[2] & 0x4); + return 0; + } + break; + case 0x1c: /* Informational Exceptions Mode page */ + if (iec_m_pg[1] == arr[off + 1]) { + memcpy(iec_m_pg + 2, arr + off + 2, + sizeof(iec_m_pg) - 2); + return 0; + } + break; + default: + break; + } + mk_sense_buffer(devip, ILLEGAL_REQUEST, + INVALID_FIELD_IN_PARAM_LIST, 0); + return check_condition_result; +} + +static int resp_temp_l_pg(unsigned char * arr) +{ + unsigned char temp_l_pg[] = {0x0, 0x0, 0x3, 0x2, 0x0, 38, + 0x0, 0x1, 0x3, 0x2, 0x0, 65, + }; + + memcpy(arr, temp_l_pg, sizeof(temp_l_pg)); + return sizeof(temp_l_pg); +} + +static int resp_ie_l_pg(unsigned char * arr) +{ + unsigned char ie_l_pg[] = {0x0, 0x0, 0x3, 0x3, 0x0, 0x0, 38, + }; + + memcpy(arr, ie_l_pg, sizeof(ie_l_pg)); + if (iec_m_pg[2] & 0x4) { /* TEST bit set */ + arr[4] = THRESHOLD_EXCEEDED; + arr[5] = 0xff; + } + return sizeof(ie_l_pg); +} + +#define SDEBUG_MAX_LSENSE_SZ 512 + +static int resp_log_sense(struct scsi_cmnd * scp, + struct sdebug_dev_info * devip) +{ + int ppc, sp, pcontrol, pcode, subpcode, alloc_len, errsts, len, n; + unsigned char arr[SDEBUG_MAX_LSENSE_SZ]; + unsigned char *cmd = (unsigned char *)scp->cmnd; + + if ((errsts = check_readiness(scp, 1, devip))) + return errsts; + memset(arr, 0, sizeof(arr)); + ppc = cmd[1] & 0x2; + sp = cmd[1] & 0x1; + if (ppc || sp) { + mk_sense_buffer(devip, ILLEGAL_REQUEST, + INVALID_FIELD_IN_CDB, 0); + return check_condition_result; + } + pcontrol = (cmd[2] & 0xc0) >> 6; + pcode = cmd[2] & 0x3f; + subpcode = cmd[3] & 0xff; + alloc_len = (cmd[7] << 8) + cmd[8]; + arr[0] = pcode; + if (0 == subpcode) { + switch (pcode) { + case 0x0: /* Supported log pages log page */ + n = 4; + arr[n++] = 0x0; /* this page */ + arr[n++] = 0xd; /* Temperature */ + arr[n++] = 0x2f; /* Informational exceptions */ + arr[3] = n - 4; + break; + case 0xd: /* Temperature log page */ + arr[3] = resp_temp_l_pg(arr + 4); + break; + case 0x2f: /* Informational exceptions log page */ + arr[3] = resp_ie_l_pg(arr + 4); + break; + default: + mk_sense_buffer(devip, ILLEGAL_REQUEST, + INVALID_FIELD_IN_CDB, 0); + return check_condition_result; + } + } else if (0xff == subpcode) { + arr[0] |= 0x40; + arr[1] = subpcode; + switch (pcode) { + case 0x0: /* Supported log pages and subpages log page */ + n = 4; + arr[n++] = 0x0; + arr[n++] = 0x0; /* 0,0 page */ + arr[n++] = 0x0; + arr[n++] = 0xff; /* this page */ + arr[n++] = 0xd; + arr[n++] = 0x0; /* Temperature */ + arr[n++] = 0x2f; + arr[n++] = 0x0; /* Informational exceptions */ + arr[3] = n - 4; + break; + case 0xd: /* Temperature subpages */ + n = 4; + arr[n++] = 0xd; + arr[n++] = 0x0; /* Temperature */ + arr[3] = n - 4; + break; + case 0x2f: /* Informational exceptions subpages */ + n = 4; + arr[n++] = 0x2f; + arr[n++] = 0x0; /* Informational exceptions */ + arr[3] = n - 4; + break; + default: + mk_sense_buffer(devip, ILLEGAL_REQUEST, + INVALID_FIELD_IN_CDB, 0); + return check_condition_result; + } + } else { + mk_sense_buffer(devip, ILLEGAL_REQUEST, + INVALID_FIELD_IN_CDB, 0); + return check_condition_result; + } + len = min(((arr[2] << 8) + arr[3]) + 4, alloc_len); + return fill_from_dev_buffer(scp, arr, + min(len, SDEBUG_MAX_INQ_ARR_SZ)); +} + +static int resp_read(struct scsi_cmnd * SCpnt, unsigned long long lba, + unsigned int num, struct sdebug_dev_info * devip) { unsigned long iflags; + unsigned int block, from_bottom; + unsigned long long u; int ret; - if (upper_blk || (block + num > sdebug_capacity)) { + if (lba + num > sdebug_capacity) { mk_sense_buffer(devip, ILLEGAL_REQUEST, ADDR_OUT_OF_RANGE, 0); return check_condition_result; } + /* transfer length excessive (tie in to block limits VPD page) */ + if (num > sdebug_store_sectors) { + mk_sense_buffer(devip, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB, + 0); + return check_condition_result; + } if ((SCSI_DEBUG_OPT_MEDIUM_ERR & scsi_debug_opts) && - (block <= OPT_MEDIUM_ERR_ADDR) && - ((block + num) > OPT_MEDIUM_ERR_ADDR)) { + (lba <= OPT_MEDIUM_ERR_ADDR) && + ((lba + num) > OPT_MEDIUM_ERR_ADDR)) { + /* claim unrecoverable read error */ mk_sense_buffer(devip, MEDIUM_ERROR, UNRECOVERED_READ_ERR, 0); - /* claim unrecoverable read error */ + /* set info field and valid bit for fixed descriptor */ + if (0x70 == (devip->sense_buff[0] & 0x7f)) { + devip->sense_buff[0] |= 0x80; /* Valid bit */ + ret = OPT_MEDIUM_ERR_ADDR; + devip->sense_buff[3] = (ret >> 24) & 0xff; + devip->sense_buff[4] = (ret >> 16) & 0xff; + devip->sense_buff[5] = (ret >> 8) & 0xff; + devip->sense_buff[6] = ret & 0xff; + } return check_condition_result; } read_lock_irqsave(&atomic_rw, iflags); - ret = fill_from_dev_buffer(SCpnt, fake_storep + (block * SECT_SIZE), - num * SECT_SIZE); + if ((lba + num) <= sdebug_store_sectors) + ret = fill_from_dev_buffer(SCpnt, + fake_storep + (lba * SECT_SIZE), + num * SECT_SIZE); + else { + /* modulo when one arg is 64 bits needs do_div() */ + u = lba; + block = do_div(u, sdebug_store_sectors); + from_bottom = 0; + if ((block + num) > sdebug_store_sectors) + from_bottom = (block + num) - sdebug_store_sectors; + ret = fill_from_dev_buffer(SCpnt, + fake_storep + (block * SECT_SIZE), + (num - from_bottom) * SECT_SIZE); + if ((0 == ret) && (from_bottom > 0)) + ret = fill_from_dev_buffer(SCpnt, fake_storep, + from_bottom * SECT_SIZE); + } read_unlock_irqrestore(&atomic_rw, iflags); return ret; } -static int resp_write(struct scsi_cmnd * SCpnt, int upper_blk, int block, - int num, struct sdebug_dev_info * devip) +static int resp_write(struct scsi_cmnd * SCpnt, unsigned long long lba, + unsigned int num, struct sdebug_dev_info * devip) { unsigned long iflags; + unsigned int block, to_bottom; + unsigned long long u; int res; - if (upper_blk || (block + num > sdebug_capacity)) { + if (lba + num > sdebug_capacity) { mk_sense_buffer(devip, ILLEGAL_REQUEST, ADDR_OUT_OF_RANGE, 0); return check_condition_result; } + /* transfer length excessive (tie in to block limits VPD page) */ + if (num > sdebug_store_sectors) { + mk_sense_buffer(devip, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB, + 0); + return check_condition_result; + } write_lock_irqsave(&atomic_rw, iflags); - res = fetch_to_dev_buffer(SCpnt, fake_storep + (block * SECT_SIZE), - num * SECT_SIZE); + if ((lba + num) <= sdebug_store_sectors) + res = fetch_to_dev_buffer(SCpnt, + fake_storep + (lba * SECT_SIZE), + num * SECT_SIZE); + else { + /* modulo when one arg is 64 bits needs do_div() */ + u = lba; + block = do_div(u, sdebug_store_sectors); + to_bottom = 0; + if ((block + num) > sdebug_store_sectors) + to_bottom = (block + num) - sdebug_store_sectors; + res = fetch_to_dev_buffer(SCpnt, + fake_storep + (block * SECT_SIZE), + (num - to_bottom) * SECT_SIZE); + if ((0 == res) && (to_bottom > 0)) + res = fetch_to_dev_buffer(SCpnt, fake_storep, + to_bottom * SECT_SIZE); + } write_unlock_irqrestore(&atomic_rw, iflags); if (-1 == res) return (DID_ERROR << 16); else if ((res < (num * SECT_SIZE)) && (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)) - printk(KERN_INFO "scsi_debug: write: cdb indicated=%d, " + printk(KERN_INFO "scsi_debug: write: cdb indicated=%u, " " IO sent=%d bytes\n", num * SECT_SIZE, res); return 0; } -#define SDEBUG_RLUN_ARR_SZ 128 +#define SDEBUG_RLUN_ARR_SZ 256 static int resp_report_luns(struct scsi_cmnd * scp, struct sdebug_dev_info * devip) { unsigned int alloc_len; - int lun_cnt, i, upper; + int lun_cnt, i, upper, num, n, wlun, lun; unsigned char *cmd = (unsigned char *)scp->cmnd; int select_report = (int)cmd[2]; struct scsi_lun *one_lun; unsigned char arr[SDEBUG_RLUN_ARR_SZ]; + unsigned char * max_addr; alloc_len = cmd[9] + (cmd[8] << 8) + (cmd[7] << 16) + (cmd[6] << 24); - if ((alloc_len < 16) || (select_report > 2)) { + if ((alloc_len < 4) || (select_report > 2)) { mk_sense_buffer(devip, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB, 0); return check_condition_result; @@ -955,18 +1802,37 @@ static int resp_report_luns(struct scsi_cmnd * scp, /* can produce response with up to 16k luns (lun 0 to lun 16383) */ memset(arr, 0, SDEBUG_RLUN_ARR_SZ); lun_cnt = scsi_debug_max_luns; - arr[2] = ((sizeof(struct scsi_lun) * lun_cnt) >> 8) & 0xff; - arr[3] = (sizeof(struct scsi_lun) * lun_cnt) & 0xff; - lun_cnt = min((int)((SDEBUG_RLUN_ARR_SZ - 8) / - sizeof(struct scsi_lun)), lun_cnt); + if (1 == select_report) + lun_cnt = 0; + else if (scsi_debug_no_lun_0 && (lun_cnt > 0)) + --lun_cnt; + wlun = (select_report > 0) ? 1 : 0; + num = lun_cnt + wlun; + arr[2] = ((sizeof(struct scsi_lun) * num) >> 8) & 0xff; + arr[3] = (sizeof(struct scsi_lun) * num) & 0xff; + n = min((int)((SDEBUG_RLUN_ARR_SZ - 8) / + sizeof(struct scsi_lun)), num); + if (n < num) { + wlun = 0; + lun_cnt = n; + } one_lun = (struct scsi_lun *) &arr[8]; - for (i = 0; i < lun_cnt; i++) { - upper = (i >> 8) & 0x3f; + max_addr = arr + SDEBUG_RLUN_ARR_SZ; + for (i = 0, lun = (scsi_debug_no_lun_0 ? 1 : 0); + ((i < lun_cnt) && ((unsigned char *)(one_lun + i) < max_addr)); + i++, lun++) { + upper = (lun >> 8) & 0x3f; if (upper) one_lun[i].scsi_lun[0] = (upper | (SAM2_LUN_ADDRESS_METHOD << 6)); - one_lun[i].scsi_lun[1] = i & 0xff; + one_lun[i].scsi_lun[1] = lun & 0xff; } + if (wlun) { + one_lun[i].scsi_lun[0] = (SAM2_WLUN_REPORT_LUNS >> 8) & 0xff; + one_lun[i].scsi_lun[1] = SAM2_WLUN_REPORT_LUNS & 0xff; + i++; + } + alloc_len = (unsigned char *)(one_lun + i) - arr; return fill_from_dev_buffer(scp, arr, min((int)alloc_len, SDEBUG_RLUN_ARR_SZ)); } @@ -1002,7 +1868,8 @@ static void timer_intr_handler(unsigned long indx) static int scsi_debug_slave_alloc(struct scsi_device * sdp) { if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) - sdev_printk(KERN_INFO, sdp, "scsi_debug: slave_alloc\n"); + printk(KERN_INFO "scsi_debug: slave_alloc <%u %u %u %u>\n", + sdp->host->host_no, sdp->channel, sdp->id, sdp->lun); return 0; } @@ -1011,7 +1878,8 @@ static int scsi_debug_slave_configure(struct scsi_device * sdp) struct sdebug_dev_info * devip; if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) - sdev_printk(KERN_INFO, sdp, "scsi_debug: slave_configure\n"); + printk(KERN_INFO "scsi_debug: slave_configure <%u %u %u %u>\n", + sdp->host->host_no, sdp->channel, sdp->id, sdp->lun); if (sdp->host->max_cmd_len != SCSI_DEBUG_MAX_CMD_LEN) sdp->host->max_cmd_len = SCSI_DEBUG_MAX_CMD_LEN; devip = devInfoReg(sdp); @@ -1019,6 +1887,7 @@ static int scsi_debug_slave_configure(struct scsi_device * sdp) if (sdp->host->cmd_per_lun) scsi_adjust_queue_depth(sdp, SDEBUG_TAGGED_QUEUING, sdp->host->cmd_per_lun); + blk_queue_max_segment_size(sdp->request_queue, 256 * 1024); return 0; } @@ -1028,7 +1897,8 @@ static void scsi_debug_slave_destroy(struct scsi_device * sdp) (struct sdebug_dev_info *)sdp->hostdata; if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) - sdev_printk(KERN_INFO, sdp, "scsi_debug: slave_destroy\n"); + printk(KERN_INFO "scsi_debug: slave_destroy <%u %u %u %u>\n", + sdp->host->host_no, sdp->channel, sdp->id, sdp->lun); if (devip) { /* make this slot avaliable for re-use */ devip->used = 0; @@ -1085,6 +1955,8 @@ static struct sdebug_dev_info * devInfoReg(struct scsi_device * sdev) open_devip->sense_buff[0] = 0x70; open_devip->sense_buff[7] = 0xa; } + if (sdev->lun == SAM2_WLUN_REPORT_LUNS) + open_devip->wlun = SAM2_WLUN_REPORT_LUNS & 0xff; return open_devip; } return NULL; @@ -1273,7 +2145,7 @@ static void __init sdebug_build_parts(unsigned char * ramp) printk(KERN_WARNING "scsi_debug:build_parts: reducing " "partitions to %d\n", SDEBUG_MAX_PARTS); } - num_sectors = (int)(sdebug_store_size / SECT_SIZE); + num_sectors = (int)sdebug_store_sectors; sectors_per_part = (num_sectors - sdebug_sectors_per) / scsi_debug_num_parts; heads_by_sects = sdebug_heads * sdebug_sectors_per; @@ -1316,9 +2188,9 @@ static int schedule_resp(struct scsi_cmnd * cmnd, if (scsi_result) { struct scsi_device * sdp = cmnd->device; - sdev_printk(KERN_INFO, sdp, - "non-zero result=0x%x\n", - scsi_result); + printk(KERN_INFO "scsi_debug: <%u %u %u %u> " + "non-zero result=0x%x\n", sdp->host->host_no, + sdp->channel, sdp->id, sdp->lun, scsi_result); } } if (cmnd && devip) { @@ -1365,21 +2237,28 @@ static int schedule_resp(struct scsi_cmnd * cmnd, } } -/* Set 'perm' (4th argument) to 0 to disable module_param's definition - * of sysfs parameters (which module_param doesn't yet support). - * Sysfs parameters defined explicitly below. +/* Note: The following macros create attribute files in the + /sys/module/scsi_debug/parameters directory. Unfortunately this + driver is unaware of a change and cannot trigger auxiliary actions + as it can when the corresponding attribute in the + /sys/bus/pseudo/drivers/scsi_debug directory is changed. */ -module_param_named(add_host, scsi_debug_add_host, int, 0); /* perm=0644 */ -module_param_named(delay, scsi_debug_delay, int, 0); /* perm=0644 */ -module_param_named(dev_size_mb, scsi_debug_dev_size_mb, int, 0); -module_param_named(dsense, scsi_debug_dsense, int, 0); -module_param_named(every_nth, scsi_debug_every_nth, int, 0); -module_param_named(max_luns, scsi_debug_max_luns, int, 0); -module_param_named(num_parts, scsi_debug_num_parts, int, 0); -module_param_named(num_tgts, scsi_debug_num_tgts, int, 0); -module_param_named(opts, scsi_debug_opts, int, 0); /* perm=0644 */ -module_param_named(ptype, scsi_debug_ptype, int, 0); -module_param_named(scsi_level, scsi_debug_scsi_level, int, 0); +module_param_named(add_host, scsi_debug_add_host, int, S_IRUGO | S_IWUSR); +module_param_named(delay, scsi_debug_delay, int, S_IRUGO | S_IWUSR); +module_param_named(dev_size_mb, scsi_debug_dev_size_mb, int, S_IRUGO); +module_param_named(dsense, scsi_debug_dsense, int, S_IRUGO | S_IWUSR); +module_param_named(every_nth, scsi_debug_every_nth, int, S_IRUGO | S_IWUSR); +module_param_named(fake_rw, scsi_debug_fake_rw, int, S_IRUGO | S_IWUSR); +module_param_named(max_luns, scsi_debug_max_luns, int, S_IRUGO | S_IWUSR); +module_param_named(no_lun_0, scsi_debug_no_lun_0, int, S_IRUGO | S_IWUSR); +module_param_named(num_parts, scsi_debug_num_parts, int, S_IRUGO); +module_param_named(num_tgts, scsi_debug_num_tgts, int, S_IRUGO | S_IWUSR); +module_param_named(opts, scsi_debug_opts, int, S_IRUGO | S_IWUSR); +module_param_named(ptype, scsi_debug_ptype, int, S_IRUGO | S_IWUSR); +module_param_named(scsi_level, scsi_debug_scsi_level, int, S_IRUGO); +module_param_named(virtual_gb, scsi_debug_virtual_gb, int, S_IRUGO | S_IWUSR); +module_param_named(vpd_use_hostno, scsi_debug_vpd_use_hostno, int, + S_IRUGO | S_IWUSR); MODULE_AUTHOR("Eric Youngdale + Douglas Gilbert"); MODULE_DESCRIPTION("SCSI debug adapter driver"); @@ -1388,15 +2267,19 @@ MODULE_VERSION(SCSI_DEBUG_VERSION); MODULE_PARM_DESC(add_host, "0..127 hosts allowed(def=1)"); MODULE_PARM_DESC(delay, "# of jiffies to delay response(def=1)"); -MODULE_PARM_DESC(dev_size_mb, "size in MB of ram shared by devs"); -MODULE_PARM_DESC(dsense, "use descriptor sense format(def: fixed)"); +MODULE_PARM_DESC(dev_size_mb, "size in MB of ram shared by devs(def=8)"); +MODULE_PARM_DESC(dsense, "use descriptor sense format(def=0 -> fixed)"); MODULE_PARM_DESC(every_nth, "timeout every nth command(def=100)"); -MODULE_PARM_DESC(max_luns, "number of SCSI LUNs per target to simulate"); +MODULE_PARM_DESC(fake_rw, "fake reads/writes instead of copying (def=0)"); +MODULE_PARM_DESC(max_luns, "number of LUNs per target to simulate(def=1)"); +MODULE_PARM_DESC(no_lun_0, "no LU number 0 (def=0 -> have lun 0)"); MODULE_PARM_DESC(num_parts, "number of partitions(def=0)"); -MODULE_PARM_DESC(num_tgts, "number of SCSI targets per host to simulate"); -MODULE_PARM_DESC(opts, "1->noise, 2->medium_error, 4->..."); +MODULE_PARM_DESC(num_tgts, "number of targets per host to simulate(def=1)"); +MODULE_PARM_DESC(opts, "1->noise, 2->medium_error, 4->... (def=0)"); MODULE_PARM_DESC(ptype, "SCSI peripheral type(def=0[disk])"); MODULE_PARM_DESC(scsi_level, "SCSI level to simulate(def=5[SPC-3])"); +MODULE_PARM_DESC(virtual_gb, "virtual gigabyte size (def=0 -> use dev_size_mb)"); +MODULE_PARM_DESC(vpd_use_hostno, "0 -> dev ids ignore hostno (def=1 -> unique dev ids)"); static char sdebug_info[256]; @@ -1548,6 +2431,42 @@ static ssize_t sdebug_dsense_store(struct device_driver * ddp, DRIVER_ATTR(dsense, S_IRUGO | S_IWUSR, sdebug_dsense_show, sdebug_dsense_store); +static ssize_t sdebug_fake_rw_show(struct device_driver * ddp, char * buf) +{ + return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_fake_rw); +} +static ssize_t sdebug_fake_rw_store(struct device_driver * ddp, + const char * buf, size_t count) +{ + int n; + + if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) { + scsi_debug_fake_rw = n; + return count; + } + return -EINVAL; +} +DRIVER_ATTR(fake_rw, S_IRUGO | S_IWUSR, sdebug_fake_rw_show, + sdebug_fake_rw_store); + +static ssize_t sdebug_no_lun_0_show(struct device_driver * ddp, char * buf) +{ + return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_no_lun_0); +} +static ssize_t sdebug_no_lun_0_store(struct device_driver * ddp, + const char * buf, size_t count) +{ + int n; + + if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) { + scsi_debug_no_lun_0 = n; + return count; + } + return -EINVAL; +} +DRIVER_ATTR(no_lun_0, S_IRUGO | S_IWUSR, sdebug_no_lun_0_show, + sdebug_no_lun_0_store); + static ssize_t sdebug_num_tgts_show(struct device_driver * ddp, char * buf) { return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_num_tgts); @@ -1623,6 +2542,29 @@ static ssize_t sdebug_scsi_level_show(struct device_driver * ddp, char * buf) } DRIVER_ATTR(scsi_level, S_IRUGO, sdebug_scsi_level_show, NULL); +static ssize_t sdebug_virtual_gb_show(struct device_driver * ddp, char * buf) +{ + return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_virtual_gb); +} +static ssize_t sdebug_virtual_gb_store(struct device_driver * ddp, + const char * buf, size_t count) +{ + int n; + + if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) { + scsi_debug_virtual_gb = n; + if (scsi_debug_virtual_gb > 0) { + sdebug_capacity = 2048 * 1024; + sdebug_capacity *= scsi_debug_virtual_gb; + } else + sdebug_capacity = sdebug_store_sectors; + return count; + } + return -EINVAL; +} +DRIVER_ATTR(virtual_gb, S_IRUGO | S_IWUSR, sdebug_virtual_gb_show, + sdebug_virtual_gb_store); + static ssize_t sdebug_add_host_show(struct device_driver * ddp, char * buf) { return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_add_host); @@ -1660,29 +2602,65 @@ static ssize_t sdebug_add_host_store(struct device_driver * ddp, DRIVER_ATTR(add_host, S_IRUGO | S_IWUSR, sdebug_add_host_show, sdebug_add_host_store); -static void do_create_driverfs_files(void) +static ssize_t sdebug_vpd_use_hostno_show(struct device_driver * ddp, + char * buf) { - driver_create_file(&sdebug_driverfs_driver, &driver_attr_add_host); - driver_create_file(&sdebug_driverfs_driver, &driver_attr_delay); - driver_create_file(&sdebug_driverfs_driver, &driver_attr_dev_size_mb); - driver_create_file(&sdebug_driverfs_driver, &driver_attr_dsense); - driver_create_file(&sdebug_driverfs_driver, &driver_attr_every_nth); - driver_create_file(&sdebug_driverfs_driver, &driver_attr_max_luns); - driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_tgts); - driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_parts); - driver_create_file(&sdebug_driverfs_driver, &driver_attr_ptype); - driver_create_file(&sdebug_driverfs_driver, &driver_attr_opts); - driver_create_file(&sdebug_driverfs_driver, &driver_attr_scsi_level); + return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_vpd_use_hostno); +} +static ssize_t sdebug_vpd_use_hostno_store(struct device_driver * ddp, + const char * buf, size_t count) +{ + int n; + + if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) { + scsi_debug_vpd_use_hostno = n; + return count; + } + return -EINVAL; +} +DRIVER_ATTR(vpd_use_hostno, S_IRUGO | S_IWUSR, sdebug_vpd_use_hostno_show, + sdebug_vpd_use_hostno_store); + +/* Note: The following function creates attribute files in the + /sys/bus/pseudo/drivers/scsi_debug directory. The advantage of these + files (over those found in the /sys/module/scsi_debug/parameters + directory) is that auxiliary actions can be triggered when an attribute + is changed. For example see: sdebug_add_host_store() above. + */ +static int do_create_driverfs_files(void) +{ + int ret; + + ret = driver_create_file(&sdebug_driverfs_driver, &driver_attr_add_host); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_delay); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_dev_size_mb); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_dsense); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_every_nth); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_fake_rw); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_max_luns); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_no_lun_0); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_parts); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_tgts); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_ptype); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_opts); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_scsi_level); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_virtual_gb); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_vpd_use_hostno); + return ret; } static void do_remove_driverfs_files(void) { + driver_remove_file(&sdebug_driverfs_driver, &driver_attr_vpd_use_hostno); + driver_remove_file(&sdebug_driverfs_driver, &driver_attr_virtual_gb); driver_remove_file(&sdebug_driverfs_driver, &driver_attr_scsi_level); driver_remove_file(&sdebug_driverfs_driver, &driver_attr_opts); driver_remove_file(&sdebug_driverfs_driver, &driver_attr_ptype); - driver_remove_file(&sdebug_driverfs_driver, &driver_attr_num_parts); driver_remove_file(&sdebug_driverfs_driver, &driver_attr_num_tgts); + driver_remove_file(&sdebug_driverfs_driver, &driver_attr_num_parts); + driver_remove_file(&sdebug_driverfs_driver, &driver_attr_no_lun_0); driver_remove_file(&sdebug_driverfs_driver, &driver_attr_max_luns); + driver_remove_file(&sdebug_driverfs_driver, &driver_attr_fake_rw); driver_remove_file(&sdebug_driverfs_driver, &driver_attr_every_nth); driver_remove_file(&sdebug_driverfs_driver, &driver_attr_dsense); driver_remove_file(&sdebug_driverfs_driver, &driver_attr_dev_size_mb); @@ -1692,14 +2670,20 @@ static void do_remove_driverfs_files(void) static int __init scsi_debug_init(void) { - unsigned long sz; + unsigned int sz; int host_to_add; int k; + int ret; if (scsi_debug_dev_size_mb < 1) scsi_debug_dev_size_mb = 1; /* force minimum 1 MB ramdisk */ - sdebug_store_size = (unsigned long)scsi_debug_dev_size_mb * 1048576; - sdebug_capacity = sdebug_store_size / SECT_SIZE; + sdebug_store_size = (unsigned int)scsi_debug_dev_size_mb * 1048576; + sdebug_store_sectors = sdebug_store_size / SECT_SIZE; + if (scsi_debug_virtual_gb > 0) { + sdebug_capacity = 2048 * 1024; + sdebug_capacity *= scsi_debug_virtual_gb; + } else + sdebug_capacity = sdebug_store_sectors; /* play around with geometry, don't waste too much on track 0 */ sdebug_heads = 8; @@ -1728,12 +2712,32 @@ static int __init scsi_debug_init(void) if (scsi_debug_num_parts > 0) sdebug_build_parts(fake_storep); - init_all_queued(); + ret = device_register(&pseudo_primary); + if (ret < 0) { + printk(KERN_WARNING "scsi_debug: device_register error: %d\n", + ret); + goto free_vm; + } + ret = bus_register(&pseudo_lld_bus); + if (ret < 0) { + printk(KERN_WARNING "scsi_debug: bus_register error: %d\n", + ret); + goto dev_unreg; + } + ret = driver_register(&sdebug_driverfs_driver); + if (ret < 0) { + printk(KERN_WARNING "scsi_debug: driver_register error: %d\n", + ret); + goto bus_unreg; + } + ret = do_create_driverfs_files(); + if (ret < 0) { + printk(KERN_WARNING "scsi_debug: driver_create_file error: %d\n", + ret); + goto del_files; + } - device_register(&pseudo_primary); - bus_register(&pseudo_lld_bus); - driver_register(&sdebug_driverfs_driver); - do_create_driverfs_files(); + init_all_queued(); sdebug_driver_template.proc_name = (char *)sdebug_proc_name; @@ -1753,6 +2757,18 @@ static int __init scsi_debug_init(void) scsi_debug_add_host); } return 0; + +del_files: + do_remove_driverfs_files(); + driver_unregister(&sdebug_driverfs_driver); +bus_unreg: + bus_unregister(&pseudo_lld_bus); +dev_unreg: + device_unregister(&pseudo_primary); +free_vm: + vfree(fake_storep); + + return ret; } static void __exit scsi_debug_exit(void) @@ -1813,7 +2829,7 @@ static int sdebug_add_adapter(void) struct sdebug_dev_info *sdbg_devinfo; struct list_head *lh, *lh_sf; - sdbg_host = kzalloc(sizeof(*sdbg_host), GFP_KERNEL); + sdbg_host = kzalloc(sizeof(*sdbg_host),GFP_KERNEL); if (NULL == sdbg_host) { printk(KERN_ERR "%s: out of memory at line %d\n", @@ -1825,7 +2841,7 @@ static int sdebug_add_adapter(void) devs_per_host = scsi_debug_num_tgts * scsi_debug_max_luns; for (k = 0; k < devs_per_host; k++) { - sdbg_devinfo = kzalloc(sizeof(*sdbg_devinfo), GFP_KERNEL); + sdbg_devinfo = kzalloc(sizeof(*sdbg_devinfo),GFP_KERNEL); if (NULL == sdbg_devinfo) { printk(KERN_ERR "%s: out of memory at line %d\n", __FUNCTION__, __LINE__); @@ -1906,7 +2922,7 @@ static int sdebug_driver_probe(struct device * dev) hpnt->max_id = scsi_debug_num_tgts + 1; else hpnt->max_id = scsi_debug_num_tgts; - hpnt->max_lun = scsi_debug_max_luns; + hpnt->max_lun = SAM2_WLUN_REPORT_LUNS; /* = scsi_debug_max_luns; */ error = scsi_add_host(hpnt, &sdbg_host->dev); if (error) { @@ -1960,7 +2976,7 @@ static void sdebug_max_tgts_luns(void) hpnt->max_id = scsi_debug_num_tgts + 1; else hpnt->max_id = scsi_debug_num_tgts; - hpnt->max_lun = scsi_debug_max_luns; + hpnt->max_lun = SAM2_WLUN_REPORT_LUNS; /* scsi_debug_max_luns; */ } spin_unlock(&sdebug_host_list_lock); } diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index fb5cb4c9ac6..3d0429bc14a 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -162,7 +162,7 @@ static struct { {"HITACHI", "DISK-SUBSYSTEM", "*", BLIST_ATTACH_PQ3 | BLIST_SPARSELUN | BLIST_LARGELUN}, {"HITACHI", "OPEN-E", "*", BLIST_ATTACH_PQ3 | BLIST_SPARSELUN | BLIST_LARGELUN}, {"HP", "A6189A", NULL, BLIST_SPARSELUN | BLIST_LARGELUN}, /* HP VA7400 */ - {"HP", "OPEN-", "*", BLIST_SPARSELUN | BLIST_LARGELUN}, /* HP XP Arrays */ + {"HP", "OPEN-", "*", BLIST_REPORTLUN2}, /* HP XP Arrays */ {"HP", "NetRAID-4M", NULL, BLIST_FORCELUN}, {"HP", "HSV100", NULL, BLIST_REPORTLUN2 | BLIST_NOSTARTONADD}, {"HP", "C1557A", NULL, BLIST_FORCELUN}, diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 6a7a60fc0a4..3d355d05461 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -460,19 +460,71 @@ static void scsi_eh_done(struct scsi_cmnd *scmd) * Return value: * SUCCESS or FAILED or NEEDS_RETRY **/ -static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout) +static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, + int cmnd_size, int timeout, int copy_sense) { struct scsi_device *sdev = scmd->device; struct Scsi_Host *shost = sdev->host; - DECLARE_COMPLETION(done); + int old_result = scmd->result; + DECLARE_COMPLETION_ONSTACK(done); unsigned long timeleft; unsigned long flags; + unsigned char old_cmnd[MAX_COMMAND_SIZE]; + enum dma_data_direction old_data_direction; + unsigned short old_use_sg; + unsigned char old_cmd_len; + unsigned old_bufflen; + void *old_buffer; int rtn; + /* + * We need saved copies of a number of fields - this is because + * error handling may need to overwrite these with different values + * to run different commands, and once error handling is complete, + * we will need to restore these values prior to running the actual + * command. + */ + old_buffer = scmd->request_buffer; + old_bufflen = scmd->request_bufflen; + memcpy(old_cmnd, scmd->cmnd, sizeof(scmd->cmnd)); + old_data_direction = scmd->sc_data_direction; + old_cmd_len = scmd->cmd_len; + old_use_sg = scmd->use_sg; + + memset(scmd->cmnd, 0, sizeof(scmd->cmnd)); + memcpy(scmd->cmnd, cmnd, cmnd_size); + + if (copy_sense) { + int gfp_mask = GFP_ATOMIC; + + if (shost->hostt->unchecked_isa_dma) + gfp_mask |= __GFP_DMA; + + scmd->sc_data_direction = DMA_FROM_DEVICE; + scmd->request_bufflen = 252; + scmd->request_buffer = kzalloc(scmd->request_bufflen, gfp_mask); + if (!scmd->request_buffer) + return FAILED; + } else { + scmd->request_buffer = NULL; + scmd->request_bufflen = 0; + scmd->sc_data_direction = DMA_NONE; + } + + scmd->underflow = 0; + scmd->use_sg = 0; + scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]); + if (sdev->scsi_level <= SCSI_2) scmd->cmnd[1] = (scmd->cmnd[1] & 0x1f) | (sdev->lun << 5 & 0xe0); + /* + * Zero the sense buffer. The scsi spec mandates that any + * untransferred sense data should be interpreted as being zero. + */ + memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer)); + shost->eh_action = &done; spin_lock_irqsave(shost->host_lock, flags); @@ -522,6 +574,29 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout) rtn = FAILED; } + + /* + * Last chance to have valid sense data. + */ + if (copy_sense) { + if (!SCSI_SENSE_VALID(scmd)) { + memcpy(scmd->sense_buffer, scmd->request_buffer, + sizeof(scmd->sense_buffer)); + } + kfree(scmd->request_buffer); + } + + + /* + * Restore original data + */ + scmd->request_buffer = old_buffer; + scmd->request_bufflen = old_bufflen; + memcpy(scmd->cmnd, old_cmnd, sizeof(scmd->cmnd)); + scmd->sc_data_direction = old_data_direction; + scmd->cmd_len = old_cmd_len; + scmd->use_sg = old_use_sg; + scmd->result = old_result; return rtn; } @@ -537,56 +612,9 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout) static int scsi_request_sense(struct scsi_cmnd *scmd) { static unsigned char generic_sense[6] = - {REQUEST_SENSE, 0, 0, 0, 252, 0}; - unsigned char *scsi_result; - int saved_result; - int rtn; - - memcpy(scmd->cmnd, generic_sense, sizeof(generic_sense)); - - scsi_result = kmalloc(252, GFP_ATOMIC | ((scmd->device->host->hostt->unchecked_isa_dma) ? __GFP_DMA : 0)); + {REQUEST_SENSE, 0, 0, 0, 252, 0}; - - if (unlikely(!scsi_result)) { - printk(KERN_ERR "%s: cannot allocate scsi_result.\n", - __FUNCTION__); - return FAILED; - } - - /* - * zero the sense buffer. some host adapters automatically always - * request sense, so it is not a good idea that - * scmd->request_buffer and scmd->sense_buffer point to the same - * address (db). 0 is not a valid sense code. - */ - memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer)); - memset(scsi_result, 0, 252); - - saved_result = scmd->result; - scmd->request_buffer = scsi_result; - scmd->request_bufflen = 252; - scmd->use_sg = 0; - scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]); - scmd->sc_data_direction = DMA_FROM_DEVICE; - scmd->underflow = 0; - - rtn = scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT); - - /* last chance to have valid sense data */ - if(!SCSI_SENSE_VALID(scmd)) { - memcpy(scmd->sense_buffer, scmd->request_buffer, - sizeof(scmd->sense_buffer)); - } - - kfree(scsi_result); - - /* - * when we eventually call scsi_finish, we really wish to complete - * the original request, so let's restore the original data. (db) - */ - scsi_setup_cmd_retry(scmd); - scmd->result = saved_result; - return rtn; + return scsi_send_eh_cmnd(scmd, generic_sense, 6, SENSE_TIMEOUT, 1); } /** @@ -605,12 +633,6 @@ void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q) { scmd->device->host->host_failed--; scmd->eh_eflags = 0; - - /* - * set this back so that the upper level can correctly free up - * things. - */ - scsi_setup_cmd_retry(scmd); list_move_tail(&scmd->eh_entry, done_q); } EXPORT_SYMBOL(scsi_eh_finish_cmd); @@ -715,47 +737,23 @@ static int scsi_eh_tur(struct scsi_cmnd *scmd) { static unsigned char tur_command[6] = {TEST_UNIT_READY, 0, 0, 0, 0, 0}; int retry_cnt = 1, rtn; - int saved_result; retry_tur: - memcpy(scmd->cmnd, tur_command, sizeof(tur_command)); - - /* - * zero the sense buffer. the scsi spec mandates that any - * untransferred sense data should be interpreted as being zero. - */ - memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer)); + rtn = scsi_send_eh_cmnd(scmd, tur_command, 6, SENSE_TIMEOUT, 0); - saved_result = scmd->result; - scmd->request_buffer = NULL; - scmd->request_bufflen = 0; - scmd->use_sg = 0; - scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]); - scmd->underflow = 0; - scmd->sc_data_direction = DMA_NONE; - - rtn = scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT); - - /* - * when we eventually call scsi_finish, we really wish to complete - * the original request, so let's restore the original data. (db) - */ - scsi_setup_cmd_retry(scmd); - scmd->result = saved_result; - - /* - * hey, we are done. let's look to see what happened. - */ SCSI_LOG_ERROR_RECOVERY(3, printk("%s: scmd %p rtn %x\n", __FUNCTION__, scmd, rtn)); - if (rtn == SUCCESS) - return 0; - else if (rtn == NEEDS_RETRY) { + + switch (rtn) { + case NEEDS_RETRY: if (retry_cnt--) goto retry_tur; + /*FALLTHRU*/ + case SUCCESS: return 0; + default: + return 1; } - return 1; } /** @@ -837,44 +835,16 @@ static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd) static int scsi_eh_try_stu(struct scsi_cmnd *scmd) { static unsigned char stu_command[6] = {START_STOP, 0, 0, 0, 1, 0}; - int rtn; - int saved_result; - - if (!scmd->device->allow_restart) - return 1; - memcpy(scmd->cmnd, stu_command, sizeof(stu_command)); - - /* - * zero the sense buffer. the scsi spec mandates that any - * untransferred sense data should be interpreted as being zero. - */ - memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer)); - - saved_result = scmd->result; - scmd->request_buffer = NULL; - scmd->request_bufflen = 0; - scmd->use_sg = 0; - scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]); - scmd->underflow = 0; - scmd->sc_data_direction = DMA_NONE; + if (scmd->device->allow_restart) { + int rtn; - rtn = scsi_send_eh_cmnd(scmd, START_UNIT_TIMEOUT); - - /* - * when we eventually call scsi_finish, we really wish to complete - * the original request, so let's restore the original data. (db) - */ - scsi_setup_cmd_retry(scmd); - scmd->result = saved_result; + rtn = scsi_send_eh_cmnd(scmd, stu_command, 6, + START_UNIT_TIMEOUT, 0); + if (rtn == SUCCESS) + return 0; + } - /* - * hey, we are done. let's look to see what happened. - */ - SCSI_LOG_ERROR_RECOVERY(3, printk("%s: scmd %p rtn %x\n", - __FUNCTION__, scmd, rtn)); - if (rtn == SUCCESS) - return 0; return 1; } @@ -1672,7 +1642,9 @@ int scsi_reset_provider(struct scsi_device *dev, int flag) { struct scsi_cmnd *scmd = scsi_get_command(dev, GFP_KERNEL); + struct Scsi_Host *shost = dev->host; struct request req; + unsigned long flags; int rtn; scmd->request = &req; @@ -1682,8 +1654,6 @@ scsi_reset_provider(struct scsi_device *dev, int flag) scmd->scsi_done = scsi_reset_provider_done_command; scmd->done = NULL; - scmd->buffer = NULL; - scmd->bufflen = 0; scmd->request_buffer = NULL; scmd->request_bufflen = 0; @@ -1699,6 +1669,10 @@ scsi_reset_provider(struct scsi_device *dev, int flag) */ scmd->pid = 0; + spin_lock_irqsave(shost->host_lock, flags); + shost->tmf_in_progress = 1; + spin_unlock_irqrestore(shost->host_lock, flags); + switch (flag) { case SCSI_TRY_RESET_DEVICE: rtn = scsi_try_bus_device_reset(scmd); @@ -1717,6 +1691,22 @@ scsi_reset_provider(struct scsi_device *dev, int flag) rtn = FAILED; } + spin_lock_irqsave(shost->host_lock, flags); + shost->tmf_in_progress = 0; + spin_unlock_irqrestore(shost->host_lock, flags); + + /* + * be sure to wake up anyone who was sleeping or had their queue + * suspended while we performed the TMF. + */ + SCSI_LOG_ERROR_RECOVERY(3, + printk("%s: waking up host to restart after TMF\n", + __FUNCTION__)); + + wake_up(&shost->host_wait); + + scsi_run_host_queues(shost); + scsi_next_command(scmd); return rtn; } diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c index a89c4115cfb..32293f45166 100644 --- a/drivers/scsi/scsi_ioctl.c +++ b/drivers/scsi/scsi_ioctl.c @@ -110,11 +110,8 @@ static int ioctl_internal_command(struct scsi_device *sdev, char *cmd, sshdr.asc, sshdr.ascq); break; case NOT_READY: /* This happens if there is no disc in drive */ - if (sdev->removable && (cmd[0] != TEST_UNIT_READY)) { - printk(KERN_INFO "Device not ready. Make sure" - " there is a disc in the drive.\n"); + if (sdev->removable) break; - } case UNIT_ATTENTION: if (sdev->removable) { sdev->changed = 1; diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 3d04a9f386a..d6743b959a7 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -436,60 +436,16 @@ EXPORT_SYMBOL_GPL(scsi_execute_async); * * Arguments: cmd - command that is ready to be queued. * - * Returns: Nothing - * * Notes: This function has the job of initializing a number of * fields related to error handling. Typically this will * be called once for each command, as required. */ -static int scsi_init_cmd_errh(struct scsi_cmnd *cmd) +static void scsi_init_cmd_errh(struct scsi_cmnd *cmd) { cmd->serial_number = 0; - memset(cmd->sense_buffer, 0, sizeof cmd->sense_buffer); - if (cmd->cmd_len == 0) cmd->cmd_len = COMMAND_SIZE(cmd->cmnd[0]); - - /* - * We need saved copies of a number of fields - this is because - * error handling may need to overwrite these with different values - * to run different commands, and once error handling is complete, - * we will need to restore these values prior to running the actual - * command. - */ - cmd->old_use_sg = cmd->use_sg; - cmd->old_cmd_len = cmd->cmd_len; - cmd->sc_old_data_direction = cmd->sc_data_direction; - cmd->old_underflow = cmd->underflow; - memcpy(cmd->data_cmnd, cmd->cmnd, sizeof(cmd->cmnd)); - cmd->buffer = cmd->request_buffer; - cmd->bufflen = cmd->request_bufflen; - - return 1; -} - -/* - * Function: scsi_setup_cmd_retry() - * - * Purpose: Restore the command state for a retry - * - * Arguments: cmd - command to be restored - * - * Returns: Nothing - * - * Notes: Immediately prior to retrying a command, we need - * to restore certain fields that we saved above. - */ -void scsi_setup_cmd_retry(struct scsi_cmnd *cmd) -{ - memcpy(cmd->cmnd, cmd->data_cmnd, sizeof(cmd->data_cmnd)); - cmd->request_buffer = cmd->buffer; - cmd->request_bufflen = cmd->bufflen; - cmd->use_sg = cmd->old_use_sg; - cmd->cmd_len = cmd->old_cmd_len; - cmd->sc_data_direction = cmd->sc_old_data_direction; - cmd->underflow = cmd->old_underflow; } void scsi_device_unbusy(struct scsi_device *sdev) @@ -595,7 +551,15 @@ static void scsi_run_queue(struct request_queue *q) list_del_init(&sdev->starved_entry); spin_unlock_irqrestore(shost->host_lock, flags); - blk_run_queue(sdev->request_queue); + + if (test_bit(QUEUE_FLAG_REENTER, &q->queue_flags) && + !test_and_set_bit(QUEUE_FLAG_REENTER, + &sdev->request_queue->queue_flags)) { + blk_run_queue(sdev->request_queue); + clear_bit(QUEUE_FLAG_REENTER, + &sdev->request_queue->queue_flags); + } else + blk_run_queue(sdev->request_queue); spin_lock_irqsave(shost->host_lock, flags); if (unlikely(!list_empty(&sdev->starved_entry))) @@ -807,22 +771,13 @@ static void scsi_free_sgtable(struct scatterlist *sgl, int index) */ static void scsi_release_buffers(struct scsi_cmnd *cmd) { - struct request *req = cmd->request; - - /* - * Free up any indirection buffers we allocated for DMA purposes. - */ if (cmd->use_sg) scsi_free_sgtable(cmd->request_buffer, cmd->sglist_len); - else if (cmd->request_buffer != req->buffer) - kfree(cmd->request_buffer); /* * Zero these out. They now point to freed memory, and it is * dangerous to hang onto the pointers. */ - cmd->buffer = NULL; - cmd->bufflen = 0; cmd->request_buffer = NULL; cmd->request_bufflen = 0; } @@ -855,11 +810,10 @@ static void scsi_release_buffers(struct scsi_cmnd *cmd) * b) We can just use scsi_requeue_command() here. This would * be used if we just wanted to retry, for example. */ -void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes, - unsigned int block_bytes) +void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) { int result = cmd->result; - int this_count = cmd->bufflen; + int this_count = cmd->request_bufflen; request_queue_t *q = cmd->device->request_queue; struct request *req = cmd->request; int clear_errors = 1; @@ -867,28 +821,14 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes, int sense_valid = 0; int sense_deferred = 0; - /* - * Free up any indirection buffers we allocated for DMA purposes. - * For the case of a READ, we need to copy the data out of the - * bounce buffer and into the real buffer. - */ - if (cmd->use_sg) - scsi_free_sgtable(cmd->buffer, cmd->sglist_len); - else if (cmd->buffer != req->buffer) { - if (rq_data_dir(req) == READ) { - unsigned long flags; - char *to = bio_kmap_irq(req->bio, &flags); - memcpy(to, cmd->buffer, cmd->bufflen); - bio_kunmap_irq(to, &flags); - } - kfree(cmd->buffer); - } + scsi_release_buffers(cmd); if (result) { sense_valid = scsi_command_normalize_sense(cmd, &sshdr); if (sense_valid) sense_deferred = scsi_sense_is_deferred(&sshdr); } + if (blk_pc_request(req)) { /* SG_IO ioctl from block level */ req->errors = result; if (result) { @@ -909,99 +849,73 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes, } /* - * Zero these out. They now point to freed memory, and it is - * dangerous to hang onto the pointers. - */ - cmd->buffer = NULL; - cmd->bufflen = 0; - cmd->request_buffer = NULL; - cmd->request_bufflen = 0; - - /* * Next deal with any sectors which we were able to correctly * handle. */ - if (good_bytes >= 0) { - SCSI_LOG_HLCOMPLETE(1, printk("%ld sectors total, %d bytes done.\n", - req->nr_sectors, good_bytes)); - SCSI_LOG_HLCOMPLETE(1, printk("use_sg is %d\n", cmd->use_sg)); + SCSI_LOG_HLCOMPLETE(1, printk("%ld sectors total, " + "%d bytes done.\n", + req->nr_sectors, good_bytes)); + SCSI_LOG_HLCOMPLETE(1, printk("use_sg is %d\n", cmd->use_sg)); - if (clear_errors) - req->errors = 0; - /* - * If multiple sectors are requested in one buffer, then - * they will have been finished off by the first command. - * If not, then we have a multi-buffer command. - * - * If block_bytes != 0, it means we had a medium error - * of some sort, and that we want to mark some number of - * sectors as not uptodate. Thus we want to inhibit - * requeueing right here - we will requeue down below - * when we handle the bad sectors. - */ + if (clear_errors) + req->errors = 0; - /* - * If the command completed without error, then either - * finish off the rest of the command, or start a new one. - */ - if (scsi_end_request(cmd, 1, good_bytes, result == 0) == NULL) - return; - } - /* - * Now, if we were good little boys and girls, Santa left us a request - * sense buffer. We can extract information from this, so we - * can choose a block to remap, etc. + /* A number of bytes were successfully read. If there + * are leftovers and there is some kind of error + * (result != 0), retry the rest. + */ + if (scsi_end_request(cmd, 1, good_bytes, result == 0) == NULL) + return; + + /* good_bytes = 0, or (inclusive) there were leftovers and + * result = 0, so scsi_end_request couldn't retry. */ if (sense_valid && !sense_deferred) { switch (sshdr.sense_key) { case UNIT_ATTENTION: if (cmd->device->removable) { - /* detected disc change. set a bit + /* Detected disc change. Set a bit * and quietly refuse further access. */ cmd->device->changed = 1; - scsi_end_request(cmd, 0, - this_count, 1); + scsi_end_request(cmd, 0, this_count, 1); return; } else { - /* - * Must have been a power glitch, or a - * bus reset. Could not have been a - * media change, so we just retry the - * request and see what happens. - */ + /* Must have been a power glitch, or a + * bus reset. Could not have been a + * media change, so we just retry the + * request and see what happens. + */ scsi_requeue_command(q, cmd); return; } break; case ILLEGAL_REQUEST: - /* - * If we had an ILLEGAL REQUEST returned, then we may - * have performed an unsupported command. The only - * thing this should be would be a ten byte read where - * only a six byte read was supported. Also, on a - * system where READ CAPACITY failed, we may have read - * past the end of the disk. - */ + /* If we had an ILLEGAL REQUEST returned, then + * we may have performed an unsupported + * command. The only thing this should be + * would be a ten byte read where only a six + * byte read was supported. Also, on a system + * where READ CAPACITY failed, we may have + * read past the end of the disk. + */ if ((cmd->device->use_10_for_rw && sshdr.asc == 0x20 && sshdr.ascq == 0x00) && (cmd->cmnd[0] == READ_10 || cmd->cmnd[0] == WRITE_10)) { cmd->device->use_10_for_rw = 0; - /* - * This will cause a retry with a 6-byte - * command. + /* This will cause a retry with a + * 6-byte command. */ scsi_requeue_command(q, cmd); - result = 0; + return; } else { scsi_end_request(cmd, 0, this_count, 1); return; } break; case NOT_READY: - /* - * If the device is in the process of becoming + /* If the device is in the process of becoming * ready, or has a temporary blockage, retry. */ if (sshdr.asc == 0x04) { @@ -1021,7 +935,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes, } if (!(req->flags & REQ_QUIET)) { scmd_printk(KERN_INFO, cmd, - "Device not ready: "); + "Device not ready: "); scsi_print_sense_hdr("", &sshdr); } scsi_end_request(cmd, 0, this_count, 1); @@ -1029,21 +943,21 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes, case VOLUME_OVERFLOW: if (!(req->flags & REQ_QUIET)) { scmd_printk(KERN_INFO, cmd, - "Volume overflow, CDB: "); - __scsi_print_command(cmd->data_cmnd); + "Volume overflow, CDB: "); + __scsi_print_command(cmd->cmnd); scsi_print_sense("", cmd); } - scsi_end_request(cmd, 0, block_bytes, 1); + /* See SSC3rXX or current. */ + scsi_end_request(cmd, 0, this_count, 1); return; default: break; } - } /* driver byte != 0 */ + } if (host_byte(result) == DID_RESET) { - /* - * Third party bus reset or reset for error - * recovery reasons. Just retry the request - * and see what happens. + /* Third party bus reset or reset for error recovery + * reasons. Just retry the request and see what + * happens. */ scsi_requeue_command(q, cmd); return; @@ -1051,21 +965,13 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes, if (result) { if (!(req->flags & REQ_QUIET)) { scmd_printk(KERN_INFO, cmd, - "SCSI error: return code = 0x%x\n", result); - + "SCSI error: return code = 0x%08x\n", + result); if (driver_byte(result) & DRIVER_SENSE) scsi_print_sense("", cmd); } - /* - * Mark a single buffer as not uptodate. Queue the remainder. - * We sometimes get this cruft in the event that a medium error - * isn't properly reported. - */ - block_bytes = req->hard_cur_sectors << 9; - if (!block_bytes) - block_bytes = req->data_len; - scsi_end_request(cmd, 0, block_bytes, 1); } + scsi_end_request(cmd, 0, this_count, !result); } EXPORT_SYMBOL(scsi_io_completion); @@ -1169,7 +1075,7 @@ static void scsi_blk_pc_done(struct scsi_cmnd *cmd) * successfully. Since this is a REQ_BLOCK_PC command the * caller should check the request's errors value */ - scsi_io_completion(cmd, cmd->bufflen, 0); + scsi_io_completion(cmd, cmd->request_bufflen); } static void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd) @@ -2050,6 +1956,7 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state) switch (oldstate) { case SDEV_CREATED: case SDEV_RUNNING: + case SDEV_QUIESCE: case SDEV_OFFLINE: case SDEV_BLOCK: break; @@ -2060,6 +1967,9 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state) case SDEV_DEL: switch (oldstate) { + case SDEV_CREATED: + case SDEV_RUNNING: + case SDEV_OFFLINE: case SDEV_CANCEL: break; default: diff --git a/drivers/scsi/scsi_logging.h b/drivers/scsi/scsi_logging.h index a3e2af6a846..1f65139e14f 100644 --- a/drivers/scsi/scsi_logging.h +++ b/drivers/scsi/scsi_logging.h @@ -1,7 +1,6 @@ #ifndef _SCSI_LOGGING_H #define _SCSI_LOGGING_H -#include <linux/config.h> /* * This defines the scsi logging feature. It is a means by which the user diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c new file mode 100644 index 00000000000..1b59b27e887 --- /dev/null +++ b/drivers/scsi/scsi_netlink.c @@ -0,0 +1,199 @@ +/* + * scsi_netlink.c - SCSI Transport Netlink Interface + * + * Copyright (C) 2006 James Smart, Emulex Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#include <linux/time.h> +#include <linux/jiffies.h> +#include <linux/security.h> +#include <net/sock.h> +#include <net/netlink.h> + +#include <scsi/scsi_netlink.h> +#include "scsi_priv.h" + +struct sock *scsi_nl_sock = NULL; +EXPORT_SYMBOL_GPL(scsi_nl_sock); + + +/** + * scsi_nl_rcv_msg - + * Receive message handler. Extracts message from a receive buffer. + * Validates message header and calls appropriate transport message handler + * + * @skb: socket receive buffer + * + **/ +static void +scsi_nl_rcv_msg(struct sk_buff *skb) +{ + struct nlmsghdr *nlh; + struct scsi_nl_hdr *hdr; + uint32_t rlen; + int err; + + while (skb->len >= NLMSG_SPACE(0)) { + err = 0; + + nlh = (struct nlmsghdr *) skb->data; + if ((nlh->nlmsg_len < (sizeof(*nlh) + sizeof(*hdr))) || + (skb->len < nlh->nlmsg_len)) { + printk(KERN_WARNING "%s: discarding partial skb\n", + __FUNCTION__); + return; + } + + rlen = NLMSG_ALIGN(nlh->nlmsg_len); + if (rlen > skb->len) + rlen = skb->len; + + if (nlh->nlmsg_type != SCSI_TRANSPORT_MSG) { + err = -EBADMSG; + goto next_msg; + } + + hdr = NLMSG_DATA(nlh); + if ((hdr->version != SCSI_NL_VERSION) || + (hdr->magic != SCSI_NL_MAGIC)) { + err = -EPROTOTYPE; + goto next_msg; + } + + if (security_netlink_recv(skb, CAP_SYS_ADMIN)) { + err = -EPERM; + goto next_msg; + } + + if (nlh->nlmsg_len < (sizeof(*nlh) + hdr->msglen)) { + printk(KERN_WARNING "%s: discarding partial message\n", + __FUNCTION__); + return; + } + + /* + * We currently don't support anyone sending us a message + */ + +next_msg: + if ((err) || (nlh->nlmsg_flags & NLM_F_ACK)) + netlink_ack(skb, nlh, err); + + skb_pull(skb, rlen); + } +} + + +/** + * scsi_nl_rcv_msg - + * Receive handler for a socket. Extracts a received message buffer from + * the socket, and starts message processing. + * + * @sk: socket + * @len: unused + * + **/ +static void +scsi_nl_rcv(struct sock *sk, int len) +{ + struct sk_buff *skb; + + while ((skb = skb_dequeue(&sk->sk_receive_queue))) { + scsi_nl_rcv_msg(skb); + kfree_skb(skb); + } +} + + +/** + * scsi_nl_rcv_event - + * Event handler for a netlink socket. + * + * @this: event notifier block + * @event: event type + * @ptr: event payload + * + **/ +static int +scsi_nl_rcv_event(struct notifier_block *this, unsigned long event, void *ptr) +{ + struct netlink_notify *n = ptr; + + if (n->protocol != NETLINK_SCSITRANSPORT) + return NOTIFY_DONE; + + /* + * Currently, we are not tracking PID's, etc. There is nothing + * to handle. + */ + + return NOTIFY_DONE; +} + +static struct notifier_block scsi_netlink_notifier = { + .notifier_call = scsi_nl_rcv_event, +}; + + +/** + * scsi_netlink_init - + * Called by SCSI subsystem to intialize the SCSI transport netlink + * interface + * + **/ +void +scsi_netlink_init(void) +{ + int error; + + error = netlink_register_notifier(&scsi_netlink_notifier); + if (error) { + printk(KERN_ERR "%s: register of event handler failed - %d\n", + __FUNCTION__, error); + return; + } + + scsi_nl_sock = netlink_kernel_create(NETLINK_SCSITRANSPORT, + SCSI_NL_GRP_CNT, scsi_nl_rcv, THIS_MODULE); + if (!scsi_nl_sock) { + printk(KERN_ERR "%s: register of recieve handler failed\n", + __FUNCTION__); + netlink_unregister_notifier(&scsi_netlink_notifier); + } + + return; +} + + +/** + * scsi_netlink_exit - + * Called by SCSI subsystem to disable the SCSI transport netlink + * interface + * + **/ +void +scsi_netlink_exit(void) +{ + if (scsi_nl_sock) { + sock_release(scsi_nl_sock->sk_socket); + netlink_unregister_notifier(&scsi_netlink_notifier); + } + + return; +} + + diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h index a1727a0e1bd..5d023d44e5e 100644 --- a/drivers/scsi/scsi_priv.h +++ b/drivers/scsi/scsi_priv.h @@ -1,7 +1,6 @@ #ifndef _SCSI_PRIV_H #define _SCSI_PRIV_H -#include <linux/config.h> #include <linux/device.h> struct request_queue; @@ -9,6 +8,7 @@ struct scsi_cmnd; struct scsi_device; struct scsi_host_template; struct Scsi_Host; +struct scsi_nl_hdr; /* @@ -58,7 +58,6 @@ extern int scsi_eh_scmd_add(struct scsi_cmnd *, int); /* scsi_lib.c */ extern int scsi_maybe_unblock_host(struct scsi_device *sdev); -extern void scsi_setup_cmd_retry(struct scsi_cmnd *cmd); extern void scsi_device_unbusy(struct scsi_device *sdev); extern int scsi_queue_insert(struct scsi_cmnd *cmd, int reason); extern void scsi_next_command(struct scsi_cmnd *cmd); @@ -112,12 +111,22 @@ extern void __scsi_remove_device(struct scsi_device *); extern struct bus_type scsi_bus_type; +/* scsi_netlink.c */ +#ifdef CONFIG_SCSI_NETLINK +extern void scsi_netlink_init(void); +extern void scsi_netlink_exit(void); +extern struct sock *scsi_nl_sock; +#else +static inline void scsi_netlink_init(void) {} +static inline void scsi_netlink_exit(void) {} +#endif + /* * internal scsi timeout functions: for use by mid-layer and transport * classes. */ -#define SCSI_DEVICE_BLOCK_MAX_TIMEOUT (HZ*60) +#define SCSI_DEVICE_BLOCK_MAX_TIMEOUT 600 /* units in seconds */ extern int scsi_internal_device_block(struct scsi_device *sdev); extern int scsi_internal_device_unblock(struct scsi_device *sdev); diff --git a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c index 55200e4fdf1..524a5f7a519 100644 --- a/drivers/scsi/scsi_proc.c +++ b/drivers/scsi/scsi_proc.c @@ -178,9 +178,7 @@ static int proc_print_scsidevice(struct device *dev, void *data) seq_printf(s, "\n"); - seq_printf(s, " Type: %s ", - sdev->type < MAX_SCSI_DEVICE_CODE ? - scsi_device_types[(int) sdev->type] : "Unknown "); + seq_printf(s, " Type: %s ", scsi_device_type(sdev->type)); seq_printf(s, " ANSI" " SCSI revision: %02x", (sdev->scsi_level - 1) ? sdev->scsi_level - 1 : 1); diff --git a/drivers/scsi/scsi_sas_internal.h b/drivers/scsi/scsi_sas_internal.h index d76e6e3d8ca..e1edab45a37 100644 --- a/drivers/scsi/scsi_sas_internal.h +++ b/drivers/scsi/scsi_sas_internal.h @@ -2,7 +2,8 @@ #define _SCSI_SAS_INTERNAL_H #define SAS_HOST_ATTRS 0 -#define SAS_PORT_ATTRS 17 +#define SAS_PHY_ATTRS 17 +#define SAS_PORT_ATTRS 1 #define SAS_RPORT_ATTRS 7 #define SAS_END_DEV_ATTRS 3 #define SAS_EXPANDER_ATTRS 7 @@ -13,12 +14,14 @@ struct sas_internal { struct sas_domain_function_template *dft; struct class_device_attribute private_host_attrs[SAS_HOST_ATTRS]; - struct class_device_attribute private_phy_attrs[SAS_PORT_ATTRS]; + struct class_device_attribute private_phy_attrs[SAS_PHY_ATTRS]; + struct class_device_attribute private_port_attrs[SAS_PORT_ATTRS]; struct class_device_attribute private_rphy_attrs[SAS_RPORT_ATTRS]; struct class_device_attribute private_end_dev_attrs[SAS_END_DEV_ATTRS]; struct class_device_attribute private_expander_attrs[SAS_EXPANDER_ATTRS]; struct transport_container phy_attr_cont; + struct transport_container port_attr_cont; struct transport_container rphy_attr_cont; struct transport_container end_dev_attr_cont; struct transport_container expander_attr_cont; @@ -28,7 +31,8 @@ struct sas_internal { * needed by scsi_sysfs.c */ struct class_device_attribute *host_attrs[SAS_HOST_ATTRS + 1]; - struct class_device_attribute *phy_attrs[SAS_PORT_ATTRS + 1]; + struct class_device_attribute *phy_attrs[SAS_PHY_ATTRS + 1]; + struct class_device_attribute *port_attrs[SAS_PORT_ATTRS + 1]; struct class_device_attribute *rphy_attrs[SAS_RPORT_ATTRS + 1]; struct class_device_attribute *end_dev_attrs[SAS_END_DEV_ATTRS + 1]; struct class_device_attribute *expander_attrs[SAS_EXPANDER_ATTRS + 1]; diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 0f7e6f94d66..fd9e281c3bf 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -25,7 +25,6 @@ * or a LUN is seen that cannot have a device attached to it. */ -#include <linux/config.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> @@ -135,59 +134,6 @@ static void scsi_unlock_floptical(struct scsi_device *sdev, } /** - * print_inquiry - printk the inquiry information - * @inq_result: printk this SCSI INQUIRY - * - * Description: - * printk the vendor, model, and other information found in the - * INQUIRY data in @inq_result. - * - * Notes: - * Remove this, and replace with a hotplug event that logs any - * relevant information. - **/ -static void print_inquiry(unsigned char *inq_result) -{ - int i; - - printk(KERN_NOTICE " Vendor: "); - for (i = 8; i < 16; i++) - if (inq_result[i] >= 0x20 && i < inq_result[4] + 5) - printk("%c", inq_result[i]); - else - printk(" "); - - printk(" Model: "); - for (i = 16; i < 32; i++) - if (inq_result[i] >= 0x20 && i < inq_result[4] + 5) - printk("%c", inq_result[i]); - else - printk(" "); - - printk(" Rev: "); - for (i = 32; i < 36; i++) - if (inq_result[i] >= 0x20 && i < inq_result[4] + 5) - printk("%c", inq_result[i]); - else - printk(" "); - - printk("\n"); - - i = inq_result[0] & 0x1f; - - printk(KERN_NOTICE " Type: %s ", - i < - MAX_SCSI_DEVICE_CODE ? scsi_device_types[i] : - "Unknown "); - printk(" ANSI SCSI revision: %02x", - inq_result[2] & 0x07); - if ((inq_result[2] & 0x07) == 1 && (inq_result[3] & 0x0f) == 1) - printk(" CCS\n"); - else - printk("\n"); -} - -/** * scsi_alloc_sdev - allocate and setup a scsi_Device * * Description: @@ -320,6 +266,18 @@ static struct scsi_target *__scsi_find_target(struct device *parent, return found_starget; } +/** + * scsi_alloc_target - allocate a new or find an existing target + * @parent: parent of the target (need not be a scsi host) + * @channel: target channel number (zero if no channels) + * @id: target id number + * + * Return an existing target if one exists, provided it hasn't already + * gone into STARGET_DEL state, otherwise allocate a new target. + * + * The target is returned with an incremented reference, so the caller + * is responsible for both reaping and doing a last put + */ static struct scsi_target *scsi_alloc_target(struct device *parent, int channel, uint id) { @@ -385,14 +343,15 @@ static struct scsi_target *scsi_alloc_target(struct device *parent, return NULL; } } + get_device(dev); return starget; found: found_target->reap_ref++; spin_unlock_irqrestore(shost->host_lock, flags); - put_device(parent); if (found_target->state != STARGET_DEL) { + put_device(parent); kfree(starget); return found_target; } @@ -451,6 +410,32 @@ void scsi_target_reap(struct scsi_target *starget) } /** + * sanitize_inquiry_string - remove non-graphical chars from an INQUIRY result string + * @s: INQUIRY result string to sanitize + * @len: length of the string + * + * Description: + * The SCSI spec says that INQUIRY vendor, product, and revision + * strings must consist entirely of graphic ASCII characters, + * padded on the right with spaces. Since not all devices obey + * this rule, we will replace non-graphic or non-ASCII characters + * with spaces. Exception: a NUL character is interpreted as a + * string terminator, so all the following characters are set to + * spaces. + **/ +static void sanitize_inquiry_string(unsigned char *s, int len) +{ + int terminated = 0; + + for (; len > 0; (--len, ++s)) { + if (*s == 0) + terminated = 1; + if (terminated || *s < 0x20 || *s > 0x7e) + *s = ' '; + } +} + +/** * scsi_probe_lun - probe a single LUN using a SCSI INQUIRY * @sdev: scsi_device to probe * @inq_result: area to store the INQUIRY result @@ -464,7 +449,7 @@ void scsi_target_reap(struct scsi_target *starget) * INQUIRY data is in @inq_result; the scsi_level and INQUIRY length * are copied to the scsi_device any flags value is stored in *@bflags. **/ -static int scsi_probe_lun(struct scsi_device *sdev, char *inq_result, +static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result, int result_len, int *bflags) { unsigned char scsi_cmd[MAX_COMMAND_SIZE]; @@ -523,7 +508,11 @@ static int scsi_probe_lun(struct scsi_device *sdev, char *inq_result, } if (result == 0) { - response_len = (unsigned char) inq_result[4] + 5; + sanitize_inquiry_string(&inq_result[8], 8); + sanitize_inquiry_string(&inq_result[16], 16); + sanitize_inquiry_string(&inq_result[32], 4); + + response_len = inq_result[4] + 5; if (response_len > 255) response_len = first_inquiry_len; /* sanity */ @@ -629,7 +618,8 @@ static int scsi_probe_lun(struct scsi_device *sdev, char *inq_result, * SCSI_SCAN_NO_RESPONSE: could not allocate or setup a scsi_device * SCSI_SCAN_LUN_PRESENT: a new scsi_device was allocated and initialized **/ -static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags) +static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, + int *bflags) { /* * XXX do not save the inquiry, since it can change underneath us, @@ -654,9 +644,8 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags) if (*bflags & BLIST_ISROM) { /* * It would be better to modify sdev->type, and set - * sdev->removable, but then the print_inquiry() output - * would not show TYPE_ROM; if print_inquiry() is removed - * the issue goes away. + * sdev->removable; this can now be done since + * print_inquiry has gone away. */ inq_result[0] = TYPE_ROM; inq_result[1] |= 0x80; /* removable */ @@ -685,8 +674,6 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags) printk(KERN_INFO "scsi: unknown device type %d\n", sdev->type); } - print_inquiry(inq_result); - /* * For a peripheral qualifier (PQ) value of 1 (001b), the SCSI * spec says: The device server is capable of supporting the @@ -716,6 +703,12 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags) if (inq_result[7] & 0x10) sdev->sdtr = 1; + sdev_printk(KERN_NOTICE, sdev, "%s %.8s %.16s %.4s PQ: %d " + "ANSI: %d%s\n", scsi_device_type(sdev->type), + sdev->vendor, sdev->model, sdev->rev, + sdev->inq_periph_qual, inq_result[2] & 0x07, + (inq_result[3] & 0x0f) == 1 ? " CCS" : ""); + /* * End sysfs code. */ @@ -810,6 +803,7 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags) static inline void scsi_destroy_sdev(struct scsi_device *sdev) { + scsi_device_set_state(sdev, SDEV_DEL); if (sdev->host->hostt->slave_destroy) sdev->host->hostt->slave_destroy(sdev); transport_destroy_device(&sdev->sdev_gendev); @@ -943,11 +937,26 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, } /* - * Non-standard SCSI targets may set the PDT to 0x1f (unknown or - * no device type) instead of using the Peripheral Qualifier to - * indicate that no LUN is present. For example, USB UFI does this. + * Some targets may set slight variations of PQ and PDT to signal + * that no LUN is present, so don't add sdev in these cases. + * Two specific examples are: + * 1) NetApp targets: return PQ=1, PDT=0x1f + * 2) USB UFI: returns PDT=0x1f, with the PQ bits being "reserved" + * in the UFI 1.0 spec (we cannot rely on reserved bits). + * + * References: + * 1) SCSI SPC-3, pp. 145-146 + * PQ=1: "A peripheral device having the specified peripheral + * device type is not connected to this logical unit. However, the + * device server is capable of supporting the specified peripheral + * device type on this logical unit." + * PDT=0x1f: "Unknown or no device type" + * 2) USB UFI 1.0, p. 20 + * PDT=00h Direct-access device (floppy) + * PDT=1Fh none (no FDD connected to the requested logical unit) */ - if (starget->pdt_1f_for_no_lun && (result[0] & 0x1f) == 0x1f) { + if (((result[0] >> 5) == 1 || starget->pdt_1f_for_no_lun) && + (result[0] & 0x1f) == 0x1f) { SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: peripheral device type" " of 31, no device added\n")); @@ -1345,7 +1354,6 @@ struct scsi_device *__scsi_add_device(struct Scsi_Host *shost, uint channel, if (!starget) return ERR_PTR(-ENOMEM); - get_device(&starget->dev); mutex_lock(&shost->scan_mutex); if (scsi_host_scan_allowed(shost)) scsi_probe_and_add_lun(starget, lun, NULL, &sdev, 1, hostdata); @@ -1404,7 +1412,6 @@ static void __scsi_scan_target(struct device *parent, unsigned int channel, if (!starget) return; - get_device(&starget->dev); if (lun != SCAN_WILD_CARD) { /* * Scan for a specific host/chan/id/lun. @@ -1586,7 +1593,8 @@ struct scsi_device *scsi_get_host_dev(struct Scsi_Host *shost) if (sdev) { sdev->sdev_gendev.parent = get_device(&starget->dev); sdev->borken = 0; - } + } else + scsi_target_reap(starget); put_device(&starget->dev); out: mutex_unlock(&shost->scan_mutex); diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index 5ec7a4fb014..e7fe565b96d 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -6,7 +6,6 @@ * Created to pull SCSI mid layer sysfs routines into one file. */ -#include <linux/config.h> #include <linux/module.h> #include <linux/init.h> #include <linux/blkdev.h> diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index f2db7a41cf1..38c215a78f6 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -32,6 +32,9 @@ #include <scsi/scsi_transport.h> #include <scsi/scsi_transport_fc.h> #include <scsi/scsi_cmnd.h> +#include <linux/netlink.h> +#include <net/netlink.h> +#include <scsi/scsi_netlink_fc.h> #include "scsi_priv.h" static int fc_queue_work(struct Scsi_Host *, struct work_struct *); @@ -93,6 +96,29 @@ fc_enum_name_search(port_type, fc_port_type, fc_port_type_names) #define FC_PORTTYPE_MAX_NAMELEN 50 +/* Convert fc_host_event_code values to ascii string name */ +static const struct { + enum fc_host_event_code value; + char *name; +} fc_host_event_code_names[] = { + { FCH_EVT_LIP, "lip" }, + { FCH_EVT_LINKUP, "link_up" }, + { FCH_EVT_LINKDOWN, "link_down" }, + { FCH_EVT_LIPRESET, "lip_reset" }, + { FCH_EVT_RSCN, "rscn" }, + { FCH_EVT_ADAPTER_CHANGE, "adapter_chg" }, + { FCH_EVT_PORT_UNKNOWN, "port_unknown" }, + { FCH_EVT_PORT_ONLINE, "port_online" }, + { FCH_EVT_PORT_OFFLINE, "port_offline" }, + { FCH_EVT_PORT_FABRIC, "port_fabric" }, + { FCH_EVT_LINK_UNKNOWN, "link_unknown" }, + { FCH_EVT_VENDOR_UNIQUE, "vendor_unique" }, +}; +fc_enum_name_search(host_event_code, fc_host_event_code, + fc_host_event_code_names) +#define FC_HOST_EVENT_CODE_MAX_NAMELEN 30 + + /* Convert fc_port_state values to ascii string name */ static struct { enum fc_port_state value; @@ -216,6 +242,7 @@ fc_bitfield_name_search(remote_port_roles, fc_remote_port_role_names) static void fc_timeout_deleted_rport(void *data); +static void fc_timeout_fail_rport_io(void *data); static void fc_scsi_scan_rport(void *data); /* @@ -223,7 +250,7 @@ static void fc_scsi_scan_rport(void *data); * Increase these values if you add attributes */ #define FC_STARGET_NUM_ATTRS 3 -#define FC_RPORT_NUM_ATTRS 9 +#define FC_RPORT_NUM_ATTRS 10 #define FC_HOST_NUM_ATTRS 17 struct fc_internal { @@ -301,8 +328,6 @@ static int fc_host_setup(struct transport_container *tc, struct device *dev, fc_host->supported_classes = FC_COS_UNSPECIFIED; memset(fc_host->supported_fc4s, 0, sizeof(fc_host->supported_fc4s)); - memset(fc_host->symbolic_name, 0, - sizeof(fc_host->symbolic_name)); fc_host->supported_speeds = FC_PORTSPEED_UNKNOWN; fc_host->maxframe_size = -1; memset(fc_host->serial_number, 0, @@ -315,6 +340,8 @@ static int fc_host_setup(struct transport_container *tc, struct device *dev, sizeof(fc_host->active_fc4s)); fc_host->speed = FC_PORTSPEED_UNKNOWN; fc_host->fabric_name = -1; + memset(fc_host->symbolic_name, 0, sizeof(fc_host->symbolic_name)); + memset(fc_host->system_hostname, 0, sizeof(fc_host->system_hostname)); fc_host->tgtid_bind_type = FC_TGTID_BIND_BY_WWPN; @@ -368,7 +395,7 @@ static DECLARE_TRANSPORT_CLASS(fc_rport_class, * should insulate the loss of a remote port. * The maximum will be capped by the value of SCSI_DEVICE_BLOCK_MAX_TIMEOUT. */ -static unsigned int fc_dev_loss_tmo = SCSI_DEVICE_BLOCK_MAX_TIMEOUT; +static unsigned int fc_dev_loss_tmo = 60; /* seconds */ module_param_named(dev_loss_tmo, fc_dev_loss_tmo, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(dev_loss_tmo, @@ -377,10 +404,184 @@ MODULE_PARM_DESC(dev_loss_tmo, " exceeded, the scsi target is removed. Value should be" " between 1 and SCSI_DEVICE_BLOCK_MAX_TIMEOUT."); +/** + * Netlink Infrastructure + **/ + +static atomic_t fc_event_seq; + +/** + * fc_get_event_number - Obtain the next sequential FC event number + * + * Notes: + * We could have inline'd this, but it would have required fc_event_seq to + * be exposed. For now, live with the subroutine call. + * Atomic used to avoid lock/unlock... + **/ +u32 +fc_get_event_number(void) +{ + return atomic_add_return(1, &fc_event_seq); +} +EXPORT_SYMBOL(fc_get_event_number); + + +/** + * fc_host_post_event - called to post an even on an fc_host. + * + * @shost: host the event occurred on + * @event_number: fc event number obtained from get_fc_event_number() + * @event_code: fc_host event being posted + * @event_data: 32bits of data for the event being posted + * + * Notes: + * This routine assumes no locks are held on entry. + **/ +void +fc_host_post_event(struct Scsi_Host *shost, u32 event_number, + enum fc_host_event_code event_code, u32 event_data) +{ + struct sk_buff *skb; + struct nlmsghdr *nlh; + struct fc_nl_event *event; + const char *name; + u32 len, skblen; + int err; + + if (!scsi_nl_sock) { + err = -ENOENT; + goto send_fail; + } + + len = FC_NL_MSGALIGN(sizeof(*event)); + skblen = NLMSG_SPACE(len); + + skb = alloc_skb(skblen, GFP_KERNEL); + if (!skb) { + err = -ENOBUFS; + goto send_fail; + } + + nlh = nlmsg_put(skb, 0, 0, SCSI_TRANSPORT_MSG, + skblen - sizeof(*nlh), 0); + if (!nlh) { + err = -ENOBUFS; + goto send_fail_skb; + } + event = NLMSG_DATA(nlh); + + INIT_SCSI_NL_HDR(&event->snlh, SCSI_NL_TRANSPORT_FC, + FC_NL_ASYNC_EVENT, len); + event->seconds = get_seconds(); + event->vendor_id = 0; + event->host_no = shost->host_no; + event->event_datalen = sizeof(u32); /* bytes */ + event->event_num = event_number; + event->event_code = event_code; + event->event_data = event_data; + + err = nlmsg_multicast(scsi_nl_sock, skb, 0, SCSI_NL_GRP_FC_EVENTS, + GFP_KERNEL); + if (err && (err != -ESRCH)) /* filter no recipient errors */ + /* nlmsg_multicast already kfree_skb'd */ + goto send_fail; + + return; + +send_fail_skb: + kfree_skb(skb); +send_fail: + name = get_fc_host_event_code_name(event_code); + printk(KERN_WARNING + "%s: Dropped Event : host %d %s data 0x%08x - err %d\n", + __FUNCTION__, shost->host_no, + (name) ? name : "<unknown>", event_data, err); + return; +} +EXPORT_SYMBOL(fc_host_post_event); + + +/** + * fc_host_post_vendor_event - called to post a vendor unique event on + * a fc_host + * + * @shost: host the event occurred on + * @event_number: fc event number obtained from get_fc_event_number() + * @data_len: amount, in bytes, of vendor unique data + * @data_buf: pointer to vendor unique data + * + * Notes: + * This routine assumes no locks are held on entry. + **/ +void +fc_host_post_vendor_event(struct Scsi_Host *shost, u32 event_number, + u32 data_len, char * data_buf, u64 vendor_id) +{ + struct sk_buff *skb; + struct nlmsghdr *nlh; + struct fc_nl_event *event; + u32 len, skblen; + int err; + + if (!scsi_nl_sock) { + err = -ENOENT; + goto send_vendor_fail; + } + + len = FC_NL_MSGALIGN(sizeof(*event) + data_len); + skblen = NLMSG_SPACE(len); + + skb = alloc_skb(skblen, GFP_KERNEL); + if (!skb) { + err = -ENOBUFS; + goto send_vendor_fail; + } + + nlh = nlmsg_put(skb, 0, 0, SCSI_TRANSPORT_MSG, + skblen - sizeof(*nlh), 0); + if (!nlh) { + err = -ENOBUFS; + goto send_vendor_fail_skb; + } + event = NLMSG_DATA(nlh); + + INIT_SCSI_NL_HDR(&event->snlh, SCSI_NL_TRANSPORT_FC, + FC_NL_ASYNC_EVENT, len); + event->seconds = get_seconds(); + event->vendor_id = vendor_id; + event->host_no = shost->host_no; + event->event_datalen = data_len; /* bytes */ + event->event_num = event_number; + event->event_code = FCH_EVT_VENDOR_UNIQUE; + memcpy(&event->event_data, data_buf, data_len); + + err = nlmsg_multicast(scsi_nl_sock, skb, 0, SCSI_NL_GRP_FC_EVENTS, + GFP_KERNEL); + if (err && (err != -ESRCH)) /* filter no recipient errors */ + /* nlmsg_multicast already kfree_skb'd */ + goto send_vendor_fail; + + return; + +send_vendor_fail_skb: + kfree_skb(skb); +send_vendor_fail: + printk(KERN_WARNING + "%s: Dropped Event : host %d vendor_unique - err %d\n", + __FUNCTION__, shost->host_no, err); + return; +} +EXPORT_SYMBOL(fc_host_post_vendor_event); + + static __init int fc_transport_init(void) { - int error = transport_class_register(&fc_host_class); + int error; + + atomic_set(&fc_event_seq, 0); + + error = transport_class_register(&fc_host_class); if (error) return error; error = transport_class_register(&fc_rport_class); @@ -424,11 +625,14 @@ store_fc_rport_##field(struct class_device *cdev, const char *buf, \ struct fc_rport *rport = transport_class_to_rport(cdev); \ struct Scsi_Host *shost = rport_to_shost(rport); \ struct fc_internal *i = to_fc_internal(shost->transportt); \ + char *cp; \ if ((rport->port_state == FC_PORTSTATE_BLOCKED) || \ (rport->port_state == FC_PORTSTATE_DELETED) || \ (rport->port_state == FC_PORTSTATE_NOTPRESENT)) \ return -EBUSY; \ - val = simple_strtoul(buf, NULL, 0); \ + val = simple_strtoul(buf, &cp, 0); \ + if (*cp && (*cp != '\n')) \ + return -EINVAL; \ i->f->set_rport_##field(rport, val); \ return count; \ } @@ -510,6 +714,13 @@ static FC_CLASS_DEVICE_ATTR(rport, title, S_IRUGO, \ if (i->f->show_rport_##field) \ count++ +#define SETUP_PRIVATE_RPORT_ATTRIBUTE_RW(field) \ +{ \ + i->private_rport_attrs[count] = class_device_attr_rport_##field; \ + i->rport_attrs[count] = &i->private_rport_attrs[count]; \ + count++; \ +} + /* The FC Transport Remote Port Attributes: */ @@ -542,12 +753,14 @@ store_fc_rport_dev_loss_tmo(struct class_device *cdev, const char *buf, struct fc_rport *rport = transport_class_to_rport(cdev); struct Scsi_Host *shost = rport_to_shost(rport); struct fc_internal *i = to_fc_internal(shost->transportt); + char *cp; if ((rport->port_state == FC_PORTSTATE_BLOCKED) || (rport->port_state == FC_PORTSTATE_DELETED) || (rport->port_state == FC_PORTSTATE_NOTPRESENT)) return -EBUSY; - val = simple_strtoul(buf, NULL, 0); - if ((val < 0) || (val > SCSI_DEVICE_BLOCK_MAX_TIMEOUT)) + val = simple_strtoul(buf, &cp, 0); + if ((*cp && (*cp != '\n')) || + (val < 0) || (val > SCSI_DEVICE_BLOCK_MAX_TIMEOUT)) return -EINVAL; i->f->set_rport_dev_loss_tmo(rport, val); return count; @@ -597,6 +810,44 @@ static FC_CLASS_DEVICE_ATTR(rport, roles, S_IRUGO, fc_private_rport_rd_enum_attr(port_state, FC_PORTSTATE_MAX_NAMELEN); fc_private_rport_rd_attr(scsi_target_id, "%d\n", 20); +/* + * fast_io_fail_tmo attribute + */ +static ssize_t +show_fc_rport_fast_io_fail_tmo (struct class_device *cdev, char *buf) +{ + struct fc_rport *rport = transport_class_to_rport(cdev); + + if (rport->fast_io_fail_tmo == -1) + return snprintf(buf, 5, "off\n"); + return snprintf(buf, 20, "%d\n", rport->fast_io_fail_tmo); +} + +static ssize_t +store_fc_rport_fast_io_fail_tmo(struct class_device *cdev, const char *buf, + size_t count) +{ + int val; + char *cp; + struct fc_rport *rport = transport_class_to_rport(cdev); + + if ((rport->port_state == FC_PORTSTATE_BLOCKED) || + (rport->port_state == FC_PORTSTATE_DELETED) || + (rport->port_state == FC_PORTSTATE_NOTPRESENT)) + return -EBUSY; + if (strncmp(buf, "off", 3) == 0) + rport->fast_io_fail_tmo = -1; + else { + val = simple_strtoul(buf, &cp, 0); + if ((*cp && (*cp != '\n')) || + (val < 0) || (val >= rport->dev_loss_tmo)) + return -EINVAL; + rport->fast_io_fail_tmo = val; + } + return count; +} +static FC_CLASS_DEVICE_ATTR(rport, fast_io_fail_tmo, S_IRUGO | S_IWUSR, + show_fc_rport_fast_io_fail_tmo, store_fc_rport_fast_io_fail_tmo); /* @@ -682,12 +933,34 @@ store_fc_host_##field(struct class_device *cdev, const char *buf, \ int val; \ struct Scsi_Host *shost = transport_class_to_shost(cdev); \ struct fc_internal *i = to_fc_internal(shost->transportt); \ + char *cp; \ \ - val = simple_strtoul(buf, NULL, 0); \ + val = simple_strtoul(buf, &cp, 0); \ + if (*cp && (*cp != '\n')) \ + return -EINVAL; \ i->f->set_host_##field(shost, val); \ return count; \ } +#define fc_host_store_str_function(field, slen) \ +static ssize_t \ +store_fc_host_##field(struct class_device *cdev, const char *buf, \ + size_t count) \ +{ \ + struct Scsi_Host *shost = transport_class_to_shost(cdev); \ + struct fc_internal *i = to_fc_internal(shost->transportt); \ + unsigned int cnt=count; \ + \ + /* count may include a LF at end of string */ \ + if (buf[cnt-1] == '\n') \ + cnt--; \ + if (cnt > ((slen) - 1)) \ + return -EINVAL; \ + memcpy(fc_host_##field(shost), buf, cnt); \ + i->f->set_host_##field(shost); \ + return count; \ +} + #define fc_host_rd_attr(field, format_string, sz) \ fc_host_show_function(field, format_string, sz, ) \ static FC_CLASS_DEVICE_ATTR(host, field, S_IRUGO, \ @@ -815,7 +1088,6 @@ fc_private_host_rd_attr_cast(node_name, "0x%llx\n", 20, unsigned long long); fc_private_host_rd_attr_cast(port_name, "0x%llx\n", 20, unsigned long long); fc_private_host_rd_attr_cast(permanent_port_name, "0x%llx\n", 20, unsigned long long); -fc_private_host_rd_attr(symbolic_name, "%s\n", (FC_SYMBOLIC_NAME_SIZE +1)); fc_private_host_rd_attr(maxframe_size, "%u bytes\n", 20); fc_private_host_rd_attr(serial_number, "%s\n", (FC_SERIAL_NUMBER_SIZE +1)); @@ -858,6 +1130,13 @@ fc_host_rd_attr(port_id, "0x%06x\n", 20); fc_host_rd_enum_attr(port_type, FC_PORTTYPE_MAX_NAMELEN); fc_host_rd_enum_attr(port_state, FC_PORTSTATE_MAX_NAMELEN); fc_host_rd_attr_cast(fabric_name, "0x%llx\n", 20, unsigned long long); +fc_host_rd_attr(symbolic_name, "%s\n", FC_SYMBOLIC_NAME_SIZE + 1); + +fc_private_host_show_function(system_hostname, "%s\n", + FC_SYMBOLIC_NAME_SIZE + 1, ) +fc_host_store_str_function(system_hostname, FC_SYMBOLIC_NAME_SIZE) +static FC_CLASS_DEVICE_ATTR(host, system_hostname, S_IRUGO | S_IWUSR, + show_fc_host_system_hostname, store_fc_host_system_hostname); /* Private Host Attributes */ @@ -1223,7 +1502,6 @@ fc_attach_transport(struct fc_function_template *ft) SETUP_HOST_ATTRIBUTE_RD(permanent_port_name); SETUP_HOST_ATTRIBUTE_RD(supported_classes); SETUP_HOST_ATTRIBUTE_RD(supported_fc4s); - SETUP_HOST_ATTRIBUTE_RD(symbolic_name); SETUP_HOST_ATTRIBUTE_RD(supported_speeds); SETUP_HOST_ATTRIBUTE_RD(maxframe_size); SETUP_HOST_ATTRIBUTE_RD(serial_number); @@ -1234,6 +1512,8 @@ fc_attach_transport(struct fc_function_template *ft) SETUP_HOST_ATTRIBUTE_RD(active_fc4s); SETUP_HOST_ATTRIBUTE_RD(speed); SETUP_HOST_ATTRIBUTE_RD(fabric_name); + SETUP_HOST_ATTRIBUTE_RD(symbolic_name); + SETUP_HOST_ATTRIBUTE_RW(system_hostname); /* Transport-managed attributes */ SETUP_PRIVATE_HOST_ATTRIBUTE_RW(tgtid_bind_type); @@ -1257,6 +1537,8 @@ fc_attach_transport(struct fc_function_template *ft) SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(roles); SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(port_state); SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(scsi_target_id); + if (ft->terminate_rport_io) + SETUP_PRIVATE_RPORT_ATTRIBUTE_RW(fast_io_fail_tmo); BUG_ON(count > FC_RPORT_NUM_ATTRS); @@ -1284,7 +1566,9 @@ EXPORT_SYMBOL(fc_release_transport); * @work: Work to queue for execution. * * Return value: - * 0 on success / != 0 for error + * 1 - work queued for execution + * 0 - work is already queued + * -EINVAL - work queue doesn't exist **/ static int fc_queue_work(struct Scsi_Host *shost, struct work_struct *work) @@ -1326,7 +1610,7 @@ fc_flush_work(struct Scsi_Host *shost) * @delay: jiffies to delay the work queuing * * Return value: - * 0 on success / != 0 for error + * 1 on success / 0 already queued / < 0 for error **/ static int fc_queue_devloss_work(struct Scsi_Host *shost, struct work_struct *work, @@ -1341,6 +1625,9 @@ fc_queue_devloss_work(struct Scsi_Host *shost, struct work_struct *work, return -EINVAL; } + if (delay == 0) + return queue_work(fc_host_devloss_work_q(shost), work); + return queue_delayed_work(fc_host_devloss_work_q(shost), work, delay); } @@ -1433,12 +1720,23 @@ fc_starget_delete(void *data) struct fc_rport *rport = (struct fc_rport *)data; struct Scsi_Host *shost = rport_to_shost(rport); unsigned long flags; + struct fc_internal *i = to_fc_internal(shost->transportt); - scsi_target_unblock(&rport->dev); + /* + * Involve the LLDD if possible. All io on the rport is to + * be terminated, either as part of the dev_loss_tmo callback + * processing, or via the terminate_rport_io function. + */ + if (i->f->dev_loss_tmo_callbk) + i->f->dev_loss_tmo_callbk(rport); + else if (i->f->terminate_rport_io) + i->f->terminate_rport_io(rport); spin_lock_irqsave(shost->host_lock, flags); if (rport->flags & FC_RPORT_DEVLOSS_PENDING) { spin_unlock_irqrestore(shost->host_lock, flags); + if (!cancel_delayed_work(&rport->fail_io_work)) + fc_flush_devloss(shost); if (!cancel_delayed_work(&rport->dev_loss_work)) fc_flush_devloss(shost); spin_lock_irqsave(shost->host_lock, flags); @@ -1461,10 +1759,7 @@ fc_rport_final_delete(void *data) struct fc_rport *rport = (struct fc_rport *)data; struct device *dev = &rport->dev; struct Scsi_Host *shost = rport_to_shost(rport); - - /* Delete SCSI target and sdevs */ - if (rport->scsi_target_id != -1) - fc_starget_delete(data); + struct fc_internal *i = to_fc_internal(shost->transportt); /* * if a scan is pending, flush the SCSI Host work_q so that @@ -1473,10 +1768,19 @@ fc_rport_final_delete(void *data) if (rport->flags & FC_RPORT_SCAN_PENDING) scsi_flush_work(shost); + /* Delete SCSI target and sdevs */ + if (rport->scsi_target_id != -1) + fc_starget_delete(data); + else if (i->f->dev_loss_tmo_callbk) + i->f->dev_loss_tmo_callbk(rport); + else if (i->f->terminate_rport_io) + i->f->terminate_rport_io(rport); + transport_remove_device(dev); device_del(dev); transport_destroy_device(dev); - put_device(&shost->shost_gendev); + put_device(&shost->shost_gendev); /* for fc_host->rport list */ + put_device(dev); /* for self-reference */ } @@ -1523,8 +1827,10 @@ fc_rport_create(struct Scsi_Host *shost, int channel, if (fci->f->dd_fcrport_size) rport->dd_data = &rport[1]; rport->channel = channel; + rport->fast_io_fail_tmo = -1; INIT_WORK(&rport->dev_loss_work, fc_timeout_deleted_rport, rport); + INIT_WORK(&rport->fail_io_work, fc_timeout_fail_rport_io, rport); INIT_WORK(&rport->scan_work, fc_scsi_scan_rport, rport); INIT_WORK(&rport->stgt_delete_work, fc_starget_delete, rport); INIT_WORK(&rport->rport_delete_work, fc_rport_final_delete, rport); @@ -1537,13 +1843,13 @@ fc_rport_create(struct Scsi_Host *shost, int channel, else rport->scsi_target_id = -1; list_add_tail(&rport->peers, &fc_host->rports); - get_device(&shost->shost_gendev); + get_device(&shost->shost_gendev); /* for fc_host->rport list */ spin_unlock_irqrestore(shost->host_lock, flags); dev = &rport->dev; - device_initialize(dev); - dev->parent = get_device(&shost->shost_gendev); + device_initialize(dev); /* takes self reference */ + dev->parent = get_device(&shost->shost_gendev); /* parent reference */ dev->release = fc_rport_dev_release; sprintf(dev->bus_id, "rport-%d:%d-%d", shost->host_no, channel, rport->number); @@ -1567,10 +1873,9 @@ fc_rport_create(struct Scsi_Host *shost, int channel, delete_rport: transport_destroy_device(dev); - put_device(dev->parent); spin_lock_irqsave(shost->host_lock, flags); list_del(&rport->peers); - put_device(&shost->shost_gendev); + put_device(&shost->shost_gendev); /* for fc_host->rport list */ spin_unlock_irqrestore(shost->host_lock, flags); put_device(dev->parent); kfree(rport); @@ -1689,11 +1994,13 @@ fc_remote_port_add(struct Scsi_Host *shost, int channel, /* restart the target */ /* - * Stop the target timer first. Take no action + * Stop the target timers first. Take no action * on the del_timer failure as the state * machine state change will validate the * transaction. */ + if (!cancel_delayed_work(&rport->fail_io_work)) + fc_flush_devloss(shost); if (!cancel_delayed_work(work)) fc_flush_devloss(shost); @@ -1707,6 +2014,8 @@ fc_remote_port_add(struct Scsi_Host *shost, int channel, spin_unlock_irqrestore(shost->host_lock, flags); + scsi_target_unblock(&rport->dev); + return rport; } } @@ -1762,9 +2071,10 @@ fc_remote_port_add(struct Scsi_Host *shost, int channel, /* initiate a scan of the target */ rport->flags |= FC_RPORT_SCAN_PENDING; scsi_queue_work(shost, &rport->scan_work); - } - - spin_unlock_irqrestore(shost->host_lock, flags); + spin_unlock_irqrestore(shost->host_lock, flags); + scsi_target_unblock(&rport->dev); + } else + spin_unlock_irqrestore(shost->host_lock, flags); return rport; } @@ -1834,6 +2144,7 @@ void fc_remote_port_delete(struct fc_rport *rport) { struct Scsi_Host *shost = rport_to_shost(rport); + struct fc_internal *i = to_fc_internal(shost->transportt); int timeout = rport->dev_loss_tmo; unsigned long flags; @@ -1864,6 +2175,12 @@ fc_remote_port_delete(struct fc_rport *rport) scsi_target_block(&rport->dev); + /* see if we need to kill io faster than waiting for device loss */ + if ((rport->fast_io_fail_tmo != -1) && + (rport->fast_io_fail_tmo < timeout) && (i->f->terminate_rport_io)) + fc_queue_devloss_work(shost, &rport->fail_io_work, + rport->fast_io_fail_tmo * HZ); + /* cap the length the devices can be blocked until they are deleted */ fc_queue_devloss_work(shost, &rport->dev_loss_work, timeout * HZ); } @@ -1923,6 +2240,8 @@ fc_remote_port_rolechg(struct fc_rport *rport, u32 roles) * machine state change will validate the * transaction. */ + if (!cancel_delayed_work(&rport->fail_io_work)) + fc_flush_devloss(shost); if (!cancel_delayed_work(&rport->dev_loss_work)) fc_flush_devloss(shost); @@ -1938,6 +2257,7 @@ fc_remote_port_rolechg(struct fc_rport *rport, u32 roles) rport->flags |= FC_RPORT_SCAN_PENDING; scsi_queue_work(shost, &rport->scan_work); spin_unlock_irqrestore(shost->host_lock, flags); + scsi_target_unblock(&rport->dev); } } EXPORT_SYMBOL(fc_remote_port_rolechg); @@ -1970,8 +2290,9 @@ fc_timeout_deleted_rport(void *data) dev_printk(KERN_ERR, &rport->dev, "blocked FC remote port time out: no longer" " a FCP target, removing starget\n"); - fc_queue_work(shost, &rport->stgt_delete_work); spin_unlock_irqrestore(shost->host_lock, flags); + scsi_target_unblock(&rport->dev); + fc_queue_work(shost, &rport->stgt_delete_work); return; } @@ -2035,17 +2356,37 @@ fc_timeout_deleted_rport(void *data) * went away and didn't come back - we'll remove * all attached scsi devices. */ + spin_unlock_irqrestore(shost->host_lock, flags); + + scsi_target_unblock(&rport->dev); fc_queue_work(shost, &rport->stgt_delete_work); +} - spin_unlock_irqrestore(shost->host_lock, flags); +/** + * fc_timeout_fail_rport_io - Timeout handler for a fast io failing on a + * disconnected SCSI target. + * + * @data: rport to terminate io on. + * + * Notes: Only requests the failure of the io, not that all are flushed + * prior to returning. + **/ +static void +fc_timeout_fail_rport_io(void *data) +{ + struct fc_rport *rport = (struct fc_rport *)data; + struct Scsi_Host *shost = rport_to_shost(rport); + struct fc_internal *i = to_fc_internal(shost->transportt); + + if (rport->port_state != FC_PORTSTATE_BLOCKED) + return; + + i->f->terminate_rport_io(rport); } /** * fc_scsi_scan_rport - called to perform a scsi scan on a remote port. * - * Will unblock the target (in case it went away and has now come back), - * then invoke a scan. - * * @data: remote port to be scanned. **/ static void @@ -2057,7 +2398,6 @@ fc_scsi_scan_rport(void *data) if ((rport->port_state == FC_PORTSTATE_ONLINE) && (rport->roles & FC_RPORT_ROLE_FCP_TARGET)) { - scsi_target_unblock(&rport->dev); scsi_scan_target(&rport->dev, rport->channel, rport->scsi_target_id, SCAN_WILD_CARD, 1); } diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 5569fdcfd62..7b0019cccce 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -34,6 +34,7 @@ #define ISCSI_SESSION_ATTRS 11 #define ISCSI_CONN_ATTRS 11 #define ISCSI_HOST_ATTRS 0 +#define ISCSI_TRANSPORT_VERSION "2.0-685" struct iscsi_internal { int daemon_pid; @@ -228,14 +229,11 @@ static struct iscsi_cls_conn *iscsi_conn_lookup(uint32_t sid, uint32_t cid) static void iscsi_session_release(struct device *dev) { struct iscsi_cls_session *session = iscsi_dev_to_session(dev); - struct iscsi_transport *transport = session->transport; struct Scsi_Host *shost; shost = iscsi_session_to_shost(session); scsi_host_put(shost); - kfree(session->targetname); kfree(session); - module_put(transport->owner); } static int iscsi_is_session_dev(const struct device *dev) @@ -251,10 +249,9 @@ static int iscsi_user_scan(struct Scsi_Host *shost, uint channel, mutex_lock(&ihost->mutex); list_for_each_entry(session, &ihost->sessions, host_list) { - if ((channel == SCAN_WILD_CARD || - channel == session->channel) && + if ((channel == SCAN_WILD_CARD || channel == 0) && (id == SCAN_WILD_CARD || id == session->target_id)) - scsi_scan_target(&session->dev, session->channel, + scsi_scan_target(&session->dev, 0, session->target_id, lun, 1); } mutex_unlock(&ihost->mutex); @@ -291,80 +288,92 @@ void iscsi_block_session(struct iscsi_cls_session *session) } EXPORT_SYMBOL_GPL(iscsi_block_session); -/** - * iscsi_create_session - create iscsi class session - * @shost: scsi host - * @transport: iscsi transport - * - * This can be called from a LLD or iscsi_transport. - **/ struct iscsi_cls_session * -iscsi_create_session(struct Scsi_Host *shost, - struct iscsi_transport *transport, int channel) +iscsi_alloc_session(struct Scsi_Host *shost, + struct iscsi_transport *transport) { - struct iscsi_host *ihost; struct iscsi_cls_session *session; - int err; - - if (!try_module_get(transport->owner)) - return NULL; session = kzalloc(sizeof(*session) + transport->sessiondata_size, GFP_KERNEL); if (!session) - goto module_put; + return NULL; + session->transport = transport; session->recovery_tmo = 120; INIT_WORK(&session->recovery_work, session_recovery_timedout, session); INIT_LIST_HEAD(&session->host_list); INIT_LIST_HEAD(&session->sess_list); + /* this is released in the dev's release function */ + scsi_host_get(shost); + session->dev.parent = &shost->shost_gendev; + session->dev.release = iscsi_session_release; + device_initialize(&session->dev); if (transport->sessiondata_size) session->dd_data = &session[1]; + return session; +} +EXPORT_SYMBOL_GPL(iscsi_alloc_session); - /* this is released in the dev's release function */ - scsi_host_get(shost); - ihost = shost->shost_data; +int iscsi_add_session(struct iscsi_cls_session *session, unsigned int target_id) +{ + struct Scsi_Host *shost = iscsi_session_to_shost(session); + struct iscsi_host *ihost; + int err; + ihost = shost->shost_data; session->sid = iscsi_session_nr++; - session->channel = channel; - session->target_id = ihost->next_target_id++; + session->target_id = target_id; snprintf(session->dev.bus_id, BUS_ID_SIZE, "session%u", session->sid); - session->dev.parent = &shost->shost_gendev; - session->dev.release = iscsi_session_release; - err = device_register(&session->dev); + err = device_add(&session->dev); if (err) { dev_printk(KERN_ERR, &session->dev, "iscsi: could not " "register session's dev\n"); - goto free_session; + goto release_host; } transport_register_device(&session->dev); mutex_lock(&ihost->mutex); list_add(&session->host_list, &ihost->sessions); mutex_unlock(&ihost->mutex); + return 0; - return session; - -free_session: - kfree(session); -module_put: - module_put(transport->owner); - return NULL; +release_host: + scsi_host_put(shost); + return err; } - -EXPORT_SYMBOL_GPL(iscsi_create_session); +EXPORT_SYMBOL_GPL(iscsi_add_session); /** - * iscsi_destroy_session - destroy iscsi session - * @session: iscsi_session + * iscsi_create_session - create iscsi class session + * @shost: scsi host + * @transport: iscsi transport * - * Can be called by a LLD or iscsi_transport. There must not be - * any running connections. + * This can be called from a LLD or iscsi_transport. **/ -int iscsi_destroy_session(struct iscsi_cls_session *session) +struct iscsi_cls_session * +iscsi_create_session(struct Scsi_Host *shost, + struct iscsi_transport *transport, + unsigned int target_id) +{ + struct iscsi_cls_session *session; + + session = iscsi_alloc_session(shost, transport); + if (!session) + return NULL; + + if (iscsi_add_session(session, target_id)) { + iscsi_free_session(session); + return NULL; + } + return session; +} +EXPORT_SYMBOL_GPL(iscsi_create_session); + +void iscsi_remove_session(struct iscsi_cls_session *session) { struct Scsi_Host *shost = iscsi_session_to_shost(session); struct iscsi_host *ihost = shost->shost_data; @@ -376,19 +385,88 @@ int iscsi_destroy_session(struct iscsi_cls_session *session) list_del(&session->host_list); mutex_unlock(&ihost->mutex); + scsi_remove_target(&session->dev); + transport_unregister_device(&session->dev); - device_unregister(&session->dev); - return 0; + device_del(&session->dev); +} +EXPORT_SYMBOL_GPL(iscsi_remove_session); + +void iscsi_free_session(struct iscsi_cls_session *session) +{ + put_device(&session->dev); } +EXPORT_SYMBOL_GPL(iscsi_free_session); + +/** + * iscsi_destroy_session - destroy iscsi session + * @session: iscsi_session + * + * Can be called by a LLD or iscsi_transport. There must not be + * any running connections. + **/ +int iscsi_destroy_session(struct iscsi_cls_session *session) +{ + iscsi_remove_session(session); + iscsi_free_session(session); + return 0; +} EXPORT_SYMBOL_GPL(iscsi_destroy_session); +static void mempool_zone_destroy(struct mempool_zone *zp) +{ + mempool_destroy(zp->pool); + kfree(zp); +} + +static void* +mempool_zone_alloc_skb(gfp_t gfp_mask, void *pool_data) +{ + struct mempool_zone *zone = pool_data; + + return alloc_skb(zone->size, gfp_mask); +} + +static void +mempool_zone_free_skb(void *element, void *pool_data) +{ + kfree_skb(element); +} + +static struct mempool_zone * +mempool_zone_init(unsigned max, unsigned size, unsigned hiwat) +{ + struct mempool_zone *zp; + + zp = kzalloc(sizeof(*zp), GFP_KERNEL); + if (!zp) + return NULL; + + zp->size = size; + zp->hiwat = hiwat; + INIT_LIST_HEAD(&zp->freequeue); + spin_lock_init(&zp->freelock); + atomic_set(&zp->allocated, 0); + + zp->pool = mempool_create(max, mempool_zone_alloc_skb, + mempool_zone_free_skb, zp); + if (!zp->pool) { + kfree(zp); + return NULL; + } + + return zp; +} + static void iscsi_conn_release(struct device *dev) { struct iscsi_cls_conn *conn = iscsi_dev_to_conn(dev); struct device *parent = conn->dev.parent; - kfree(conn->persistent_address); + mempool_zone_destroy(conn->z_pdu); + mempool_zone_destroy(conn->z_error); + kfree(conn); put_device(parent); } @@ -398,6 +476,31 @@ static int iscsi_is_conn_dev(const struct device *dev) return dev->release == iscsi_conn_release; } +static int iscsi_create_event_pools(struct iscsi_cls_conn *conn) +{ + conn->z_pdu = mempool_zone_init(Z_MAX_PDU, + NLMSG_SPACE(sizeof(struct iscsi_uevent) + + sizeof(struct iscsi_hdr) + + DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH), + Z_HIWAT_PDU); + if (!conn->z_pdu) { + dev_printk(KERN_ERR, &conn->dev, "iscsi: can not allocate " + "pdu zone for new conn\n"); + return -ENOMEM; + } + + conn->z_error = mempool_zone_init(Z_MAX_ERROR, + NLMSG_SPACE(sizeof(struct iscsi_uevent)), + Z_HIWAT_ERROR); + if (!conn->z_error) { + dev_printk(KERN_ERR, &conn->dev, "iscsi: can not allocate " + "error zone for new conn\n"); + mempool_zone_destroy(conn->z_pdu); + return -ENOMEM; + } + return 0; +} + /** * iscsi_create_conn - create iscsi class connection * @session: iscsi cls session @@ -430,9 +533,12 @@ iscsi_create_conn(struct iscsi_cls_session *session, uint32_t cid) conn->transport = transport; conn->cid = cid; + if (iscsi_create_event_pools(conn)) + goto free_conn; + /* this is released in the dev's release function */ if (!get_device(&session->dev)) - goto free_conn; + goto free_conn_pools; snprintf(conn->dev.bus_id, BUS_ID_SIZE, "connection%d:%u", session->sid, cid); @@ -449,6 +555,8 @@ iscsi_create_conn(struct iscsi_cls_session *session, uint32_t cid) release_parent_ref: put_device(&session->dev); +free_conn_pools: + free_conn: kfree(conn); return NULL; @@ -496,20 +604,6 @@ static inline struct list_head *skb_to_lh(struct sk_buff *skb) return (struct list_head *)&skb->cb; } -static void* -mempool_zone_alloc_skb(gfp_t gfp_mask, void *pool_data) -{ - struct mempool_zone *zone = pool_data; - - return alloc_skb(zone->size, gfp_mask); -} - -static void -mempool_zone_free_skb(void *element, void *pool_data) -{ - kfree_skb(element); -} - static void mempool_zone_complete(struct mempool_zone *zone) { @@ -529,37 +623,6 @@ mempool_zone_complete(struct mempool_zone *zone) spin_unlock_irqrestore(&zone->freelock, flags); } -static struct mempool_zone * -mempool_zone_init(unsigned max, unsigned size, unsigned hiwat) -{ - struct mempool_zone *zp; - - zp = kzalloc(sizeof(*zp), GFP_KERNEL); - if (!zp) - return NULL; - - zp->size = size; - zp->hiwat = hiwat; - INIT_LIST_HEAD(&zp->freequeue); - spin_lock_init(&zp->freelock); - atomic_set(&zp->allocated, 0); - - zp->pool = mempool_create(max, mempool_zone_alloc_skb, - mempool_zone_free_skb, zp); - if (!zp->pool) { - kfree(zp); - return NULL; - } - - return zp; -} - -static void mempool_zone_destroy(struct mempool_zone *zp) -{ - mempool_destroy(zp->pool); - kfree(zp); -} - static struct sk_buff* mempool_zone_get_skb(struct mempool_zone *zone) { @@ -572,6 +635,27 @@ mempool_zone_get_skb(struct mempool_zone *zone) } static int +iscsi_broadcast_skb(struct mempool_zone *zone, struct sk_buff *skb, gfp_t gfp) +{ + unsigned long flags; + int rc; + + skb_get(skb); + rc = netlink_broadcast(nls, skb, 0, 1, gfp); + if (rc < 0) { + mempool_free(skb, zone->pool); + printk(KERN_ERR "iscsi: can not broadcast skb (%d)\n", rc); + return rc; + } + + spin_lock_irqsave(&zone->freelock, flags); + INIT_LIST_HEAD(skb_to_lh(skb)); + list_add(skb_to_lh(skb), &zone->freequeue); + spin_unlock_irqrestore(&zone->freelock, flags); + return 0; +} + +static int iscsi_unicast_skb(struct mempool_zone *zone, struct sk_buff *skb, int pid) { unsigned long flags; @@ -666,7 +750,7 @@ void iscsi_conn_error(struct iscsi_cls_conn *conn, enum iscsi_err error) ev->r.connerror.cid = conn->cid; ev->r.connerror.sid = iscsi_conn_get_sid(conn); - iscsi_unicast_skb(conn->z_error, skb, priv->daemon_pid); + iscsi_broadcast_skb(conn->z_error, skb, GFP_ATOMIC); dev_printk(KERN_INFO, &conn->dev, "iscsi: detected conn error (%d)\n", error); @@ -767,6 +851,131 @@ iscsi_if_get_stats(struct iscsi_transport *transport, struct nlmsghdr *nlh) return err; } +/** + * iscsi_if_destroy_session_done - send session destr. completion event + * @conn: last connection for session + * + * This is called by HW iscsi LLDs to notify userpsace that its HW has + * removed a session. + **/ +int iscsi_if_destroy_session_done(struct iscsi_cls_conn *conn) +{ + struct iscsi_internal *priv; + struct iscsi_cls_session *session; + struct Scsi_Host *shost; + struct iscsi_uevent *ev; + struct sk_buff *skb; + struct nlmsghdr *nlh; + unsigned long flags; + int rc, len = NLMSG_SPACE(sizeof(*ev)); + + priv = iscsi_if_transport_lookup(conn->transport); + if (!priv) + return -EINVAL; + + session = iscsi_dev_to_session(conn->dev.parent); + shost = iscsi_session_to_shost(session); + + mempool_zone_complete(conn->z_pdu); + + skb = mempool_zone_get_skb(conn->z_pdu); + if (!skb) { + dev_printk(KERN_ERR, &conn->dev, "Cannot notify userspace of " + "session creation event\n"); + return -ENOMEM; + } + + nlh = __nlmsg_put(skb, priv->daemon_pid, 0, 0, (len - sizeof(*nlh)), 0); + ev = NLMSG_DATA(nlh); + ev->transport_handle = iscsi_handle(conn->transport); + ev->type = ISCSI_KEVENT_DESTROY_SESSION; + ev->r.d_session.host_no = shost->host_no; + ev->r.d_session.sid = session->sid; + + /* + * this will occur if the daemon is not up, so we just warn + * the user and when the daemon is restarted it will handle it + */ + rc = iscsi_broadcast_skb(conn->z_pdu, skb, GFP_KERNEL); + if (rc < 0) + dev_printk(KERN_ERR, &conn->dev, "Cannot notify userspace of " + "session destruction event. Check iscsi daemon\n"); + + spin_lock_irqsave(&sesslock, flags); + list_del(&session->sess_list); + spin_unlock_irqrestore(&sesslock, flags); + + spin_lock_irqsave(&connlock, flags); + conn->active = 0; + list_del(&conn->conn_list); + spin_unlock_irqrestore(&connlock, flags); + + return rc; +} +EXPORT_SYMBOL_GPL(iscsi_if_destroy_session_done); + +/** + * iscsi_if_create_session_done - send session creation completion event + * @conn: leading connection for session + * + * This is called by HW iscsi LLDs to notify userpsace that its HW has + * created a session or a existing session is back in the logged in state. + **/ +int iscsi_if_create_session_done(struct iscsi_cls_conn *conn) +{ + struct iscsi_internal *priv; + struct iscsi_cls_session *session; + struct Scsi_Host *shost; + struct iscsi_uevent *ev; + struct sk_buff *skb; + struct nlmsghdr *nlh; + unsigned long flags; + int rc, len = NLMSG_SPACE(sizeof(*ev)); + + priv = iscsi_if_transport_lookup(conn->transport); + if (!priv) + return -EINVAL; + + session = iscsi_dev_to_session(conn->dev.parent); + shost = iscsi_session_to_shost(session); + + mempool_zone_complete(conn->z_pdu); + + skb = mempool_zone_get_skb(conn->z_pdu); + if (!skb) { + dev_printk(KERN_ERR, &conn->dev, "Cannot notify userspace of " + "session creation event\n"); + return -ENOMEM; + } + + nlh = __nlmsg_put(skb, priv->daemon_pid, 0, 0, (len - sizeof(*nlh)), 0); + ev = NLMSG_DATA(nlh); + ev->transport_handle = iscsi_handle(conn->transport); + ev->type = ISCSI_UEVENT_CREATE_SESSION; + ev->r.c_session_ret.host_no = shost->host_no; + ev->r.c_session_ret.sid = session->sid; + + /* + * this will occur if the daemon is not up, so we just warn + * the user and when the daemon is restarted it will handle it + */ + rc = iscsi_broadcast_skb(conn->z_pdu, skb, GFP_KERNEL); + if (rc < 0) + dev_printk(KERN_ERR, &conn->dev, "Cannot notify userspace of " + "session creation event. Check iscsi daemon\n"); + + spin_lock_irqsave(&sesslock, flags); + list_add(&session->sess_list, &sesslist); + spin_unlock_irqrestore(&sesslock, flags); + + spin_lock_irqsave(&connlock, flags); + list_add(&conn->conn_list, &connlist); + conn->active = 1; + spin_unlock_irqrestore(&connlock, flags); + return rc; +} +EXPORT_SYMBOL_GPL(iscsi_if_create_session_done); + static int iscsi_if_create_session(struct iscsi_internal *priv, struct iscsi_uevent *ev) { @@ -812,26 +1021,6 @@ iscsi_if_create_conn(struct iscsi_transport *transport, struct iscsi_uevent *ev) return -ENOMEM; } - conn->z_pdu = mempool_zone_init(Z_MAX_PDU, - NLMSG_SPACE(sizeof(struct iscsi_uevent) + - sizeof(struct iscsi_hdr) + - DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH), - Z_HIWAT_PDU); - if (!conn->z_pdu) { - dev_printk(KERN_ERR, &conn->dev, "iscsi: can not allocate " - "pdu zone for new conn\n"); - goto destroy_conn; - } - - conn->z_error = mempool_zone_init(Z_MAX_ERROR, - NLMSG_SPACE(sizeof(struct iscsi_uevent)), - Z_HIWAT_ERROR); - if (!conn->z_error) { - dev_printk(KERN_ERR, &conn->dev, "iscsi: can not allocate " - "error zone for new conn\n"); - goto free_pdu_pool; - } - ev->r.c_conn_ret.sid = session->sid; ev->r.c_conn_ret.cid = conn->cid; @@ -841,13 +1030,6 @@ iscsi_if_create_conn(struct iscsi_transport *transport, struct iscsi_uevent *ev) spin_unlock_irqrestore(&connlock, flags); return 0; - -free_pdu_pool: - mempool_zone_destroy(conn->z_pdu); -destroy_conn: - if (transport->destroy_conn) - transport->destroy_conn(conn->dd_data); - return -ENOMEM; } static int @@ -855,7 +1037,6 @@ iscsi_if_destroy_conn(struct iscsi_transport *transport, struct iscsi_uevent *ev { unsigned long flags; struct iscsi_cls_conn *conn; - struct mempool_zone *z_error, *z_pdu; conn = iscsi_conn_lookup(ev->u.d_conn.sid, ev->u.d_conn.cid); if (!conn) @@ -865,35 +1046,18 @@ iscsi_if_destroy_conn(struct iscsi_transport *transport, struct iscsi_uevent *ev list_del(&conn->conn_list); spin_unlock_irqrestore(&connlock, flags); - z_pdu = conn->z_pdu; - z_error = conn->z_error; - if (transport->destroy_conn) transport->destroy_conn(conn); - - mempool_zone_destroy(z_pdu); - mempool_zone_destroy(z_error); - return 0; } -static void -iscsi_copy_param(struct iscsi_uevent *ev, uint32_t *value, char *data) -{ - if (ev->u.set_param.len != sizeof(uint32_t)) - BUG(); - memcpy(value, data, min_t(uint32_t, sizeof(uint32_t), - ev->u.set_param.len)); -} - static int iscsi_set_param(struct iscsi_transport *transport, struct iscsi_uevent *ev) { char *data = (char*)ev + sizeof(*ev); struct iscsi_cls_conn *conn; struct iscsi_cls_session *session; - int err = 0; - uint32_t value = 0; + int err = 0, value = 0; session = iscsi_session_lookup(ev->u.set_param.sid); conn = iscsi_conn_lookup(ev->u.set_param.sid, ev->u.set_param.cid); @@ -902,42 +1066,13 @@ iscsi_set_param(struct iscsi_transport *transport, struct iscsi_uevent *ev) switch (ev->u.set_param.param) { case ISCSI_PARAM_SESS_RECOVERY_TMO: - iscsi_copy_param(ev, &value, data); + sscanf(data, "%d", &value); if (value != 0) session->recovery_tmo = value; break; - case ISCSI_PARAM_TARGET_NAME: - /* this should not change between logins */ - if (session->targetname) - return 0; - - session->targetname = kstrdup(data, GFP_KERNEL); - if (!session->targetname) - return -ENOMEM; - break; - case ISCSI_PARAM_TPGT: - iscsi_copy_param(ev, &value, data); - session->tpgt = value; - break; - case ISCSI_PARAM_PERSISTENT_PORT: - iscsi_copy_param(ev, &value, data); - conn->persistent_port = value; - break; - case ISCSI_PARAM_PERSISTENT_ADDRESS: - /* - * this is the address returned in discovery so it should - * not change between logins. - */ - if (conn->persistent_address) - return 0; - - conn->persistent_address = kstrdup(data, GFP_KERNEL); - if (!conn->persistent_address) - return -ENOMEM; - break; default: - iscsi_copy_param(ev, &value, data); - err = transport->set_param(conn, ev->u.set_param.param, value); + err = transport->set_param(conn, ev->u.set_param.param, + data, ev->u.set_param.len); } return err; @@ -978,6 +1113,21 @@ iscsi_if_transport_ep(struct iscsi_transport *transport, } static int +iscsi_tgt_dscvr(struct iscsi_transport *transport, + struct iscsi_uevent *ev) +{ + struct sockaddr *dst_addr; + + if (!transport->tgt_dscvr) + return -EINVAL; + + dst_addr = (struct sockaddr *)((char*)ev + sizeof(*ev)); + return transport->tgt_dscvr(ev->u.tgt_dscvr.type, + ev->u.tgt_dscvr.host_no, + ev->u.tgt_dscvr.enable, dst_addr); +} + +static int iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh) { int err = 0; @@ -1065,6 +1215,9 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh) case ISCSI_UEVENT_TRANSPORT_EP_DISCONNECT: err = iscsi_if_transport_ep(transport, ev, nlh->nlmsg_type); break; + case ISCSI_UEVENT_TGT_DSCVR: + err = iscsi_tgt_dscvr(transport, ev); + break; default: err = -EINVAL; break; @@ -1147,49 +1300,31 @@ struct class_device_attribute class_device_attr_##_prefix##_##_name = \ /* * iSCSI connection attrs */ -#define iscsi_conn_int_attr_show(param, format) \ -static ssize_t \ -show_conn_int_param_##param(struct class_device *cdev, char *buf) \ -{ \ - uint32_t value = 0; \ - struct iscsi_cls_conn *conn = iscsi_cdev_to_conn(cdev); \ - struct iscsi_transport *t = conn->transport; \ - \ - t->get_conn_param(conn, param, &value); \ - return snprintf(buf, 20, format"\n", value); \ -} - -#define iscsi_conn_int_attr(field, param, format) \ - iscsi_conn_int_attr_show(param, format) \ -static ISCSI_CLASS_ATTR(conn, field, S_IRUGO, show_conn_int_param_##param, \ - NULL); - -iscsi_conn_int_attr(max_recv_dlength, ISCSI_PARAM_MAX_RECV_DLENGTH, "%u"); -iscsi_conn_int_attr(max_xmit_dlength, ISCSI_PARAM_MAX_XMIT_DLENGTH, "%u"); -iscsi_conn_int_attr(header_digest, ISCSI_PARAM_HDRDGST_EN, "%d"); -iscsi_conn_int_attr(data_digest, ISCSI_PARAM_DATADGST_EN, "%d"); -iscsi_conn_int_attr(ifmarker, ISCSI_PARAM_IFMARKER_EN, "%d"); -iscsi_conn_int_attr(ofmarker, ISCSI_PARAM_OFMARKER_EN, "%d"); -iscsi_conn_int_attr(persistent_port, ISCSI_PARAM_PERSISTENT_PORT, "%d"); -iscsi_conn_int_attr(port, ISCSI_PARAM_CONN_PORT, "%d"); -iscsi_conn_int_attr(exp_statsn, ISCSI_PARAM_EXP_STATSN, "%u"); - -#define iscsi_conn_str_attr_show(param) \ +#define iscsi_conn_attr_show(param) \ static ssize_t \ -show_conn_str_param_##param(struct class_device *cdev, char *buf) \ +show_conn_param_##param(struct class_device *cdev, char *buf) \ { \ struct iscsi_cls_conn *conn = iscsi_cdev_to_conn(cdev); \ struct iscsi_transport *t = conn->transport; \ - return t->get_conn_str_param(conn, param, buf); \ + return t->get_conn_param(conn, param, buf); \ } -#define iscsi_conn_str_attr(field, param) \ - iscsi_conn_str_attr_show(param) \ -static ISCSI_CLASS_ATTR(conn, field, S_IRUGO, show_conn_str_param_##param, \ +#define iscsi_conn_attr(field, param) \ + iscsi_conn_attr_show(param) \ +static ISCSI_CLASS_ATTR(conn, field, S_IRUGO, show_conn_param_##param, \ NULL); -iscsi_conn_str_attr(persistent_address, ISCSI_PARAM_PERSISTENT_ADDRESS); -iscsi_conn_str_attr(address, ISCSI_PARAM_CONN_ADDRESS); +iscsi_conn_attr(max_recv_dlength, ISCSI_PARAM_MAX_RECV_DLENGTH); +iscsi_conn_attr(max_xmit_dlength, ISCSI_PARAM_MAX_XMIT_DLENGTH); +iscsi_conn_attr(header_digest, ISCSI_PARAM_HDRDGST_EN); +iscsi_conn_attr(data_digest, ISCSI_PARAM_DATADGST_EN); +iscsi_conn_attr(ifmarker, ISCSI_PARAM_IFMARKER_EN); +iscsi_conn_attr(ofmarker, ISCSI_PARAM_OFMARKER_EN); +iscsi_conn_attr(persistent_port, ISCSI_PARAM_PERSISTENT_PORT); +iscsi_conn_attr(port, ISCSI_PARAM_CONN_PORT); +iscsi_conn_attr(exp_statsn, ISCSI_PARAM_EXP_STATSN); +iscsi_conn_attr(persistent_address, ISCSI_PARAM_PERSISTENT_ADDRESS); +iscsi_conn_attr(address, ISCSI_PARAM_CONN_ADDRESS); #define iscsi_cdev_to_session(_cdev) \ iscsi_dev_to_session(_cdev->dev) @@ -1197,61 +1332,36 @@ iscsi_conn_str_attr(address, ISCSI_PARAM_CONN_ADDRESS); /* * iSCSI session attrs */ -#define iscsi_session_int_attr_show(param, format) \ -static ssize_t \ -show_session_int_param_##param(struct class_device *cdev, char *buf) \ -{ \ - uint32_t value = 0; \ - struct iscsi_cls_session *session = iscsi_cdev_to_session(cdev); \ - struct iscsi_transport *t = session->transport; \ - \ - t->get_session_param(session, param, &value); \ - return snprintf(buf, 20, format"\n", value); \ -} - -#define iscsi_session_int_attr(field, param, format) \ - iscsi_session_int_attr_show(param, format) \ -static ISCSI_CLASS_ATTR(sess, field, S_IRUGO, show_session_int_param_##param, \ - NULL); - -iscsi_session_int_attr(initial_r2t, ISCSI_PARAM_INITIAL_R2T_EN, "%d"); -iscsi_session_int_attr(max_outstanding_r2t, ISCSI_PARAM_MAX_R2T, "%hu"); -iscsi_session_int_attr(immediate_data, ISCSI_PARAM_IMM_DATA_EN, "%d"); -iscsi_session_int_attr(first_burst_len, ISCSI_PARAM_FIRST_BURST, "%u"); -iscsi_session_int_attr(max_burst_len, ISCSI_PARAM_MAX_BURST, "%u"); -iscsi_session_int_attr(data_pdu_in_order, ISCSI_PARAM_PDU_INORDER_EN, "%d"); -iscsi_session_int_attr(data_seq_in_order, ISCSI_PARAM_DATASEQ_INORDER_EN, "%d"); -iscsi_session_int_attr(erl, ISCSI_PARAM_ERL, "%d"); -iscsi_session_int_attr(tpgt, ISCSI_PARAM_TPGT, "%d"); - -#define iscsi_session_str_attr_show(param) \ +#define iscsi_session_attr_show(param) \ static ssize_t \ -show_session_str_param_##param(struct class_device *cdev, char *buf) \ +show_session_param_##param(struct class_device *cdev, char *buf) \ { \ struct iscsi_cls_session *session = iscsi_cdev_to_session(cdev); \ struct iscsi_transport *t = session->transport; \ - return t->get_session_str_param(session, param, buf); \ + return t->get_session_param(session, param, buf); \ } -#define iscsi_session_str_attr(field, param) \ - iscsi_session_str_attr_show(param) \ -static ISCSI_CLASS_ATTR(sess, field, S_IRUGO, show_session_str_param_##param, \ +#define iscsi_session_attr(field, param) \ + iscsi_session_attr_show(param) \ +static ISCSI_CLASS_ATTR(sess, field, S_IRUGO, show_session_param_##param, \ NULL); -iscsi_session_str_attr(targetname, ISCSI_PARAM_TARGET_NAME); +iscsi_session_attr(targetname, ISCSI_PARAM_TARGET_NAME); +iscsi_session_attr(initial_r2t, ISCSI_PARAM_INITIAL_R2T_EN); +iscsi_session_attr(max_outstanding_r2t, ISCSI_PARAM_MAX_R2T); +iscsi_session_attr(immediate_data, ISCSI_PARAM_IMM_DATA_EN); +iscsi_session_attr(first_burst_len, ISCSI_PARAM_FIRST_BURST); +iscsi_session_attr(max_burst_len, ISCSI_PARAM_MAX_BURST); +iscsi_session_attr(data_pdu_in_order, ISCSI_PARAM_PDU_INORDER_EN); +iscsi_session_attr(data_seq_in_order, ISCSI_PARAM_DATASEQ_INORDER_EN); +iscsi_session_attr(erl, ISCSI_PARAM_ERL); +iscsi_session_attr(tpgt, ISCSI_PARAM_TPGT); -/* - * Private session and conn attrs. userspace uses several iscsi values - * to identify each session between reboots. Some of these values may not - * be present in the iscsi_transport/LLD driver becuase userspace handles - * login (and failback for login redirect) so for these type of drivers - * the class manages the attrs and values for the iscsi_transport/LLD - */ #define iscsi_priv_session_attr_show(field, format) \ static ssize_t \ -show_priv_session_##field(struct class_device *cdev, char *buf) \ +show_priv_session_##field(struct class_device *cdev, char *buf) \ { \ - struct iscsi_cls_session *session = iscsi_cdev_to_session(cdev); \ + struct iscsi_cls_session *session = iscsi_cdev_to_session(cdev);\ return sprintf(buf, format"\n", session->field); \ } @@ -1259,31 +1369,15 @@ show_priv_session_##field(struct class_device *cdev, char *buf) \ iscsi_priv_session_attr_show(field, format) \ static ISCSI_CLASS_ATTR(priv_sess, field, S_IRUGO, show_priv_session_##field, \ NULL) -iscsi_priv_session_attr(targetname, "%s"); -iscsi_priv_session_attr(tpgt, "%d"); iscsi_priv_session_attr(recovery_tmo, "%d"); -#define iscsi_priv_conn_attr_show(field, format) \ -static ssize_t \ -show_priv_conn_##field(struct class_device *cdev, char *buf) \ -{ \ - struct iscsi_cls_conn *conn = iscsi_cdev_to_conn(cdev); \ - return sprintf(buf, format"\n", conn->field); \ -} - -#define iscsi_priv_conn_attr(field, format) \ - iscsi_priv_conn_attr_show(field, format) \ -static ISCSI_CLASS_ATTR(priv_conn, field, S_IRUGO, show_priv_conn_##field, \ - NULL) -iscsi_priv_conn_attr(persistent_address, "%s"); -iscsi_priv_conn_attr(persistent_port, "%d"); - #define SETUP_PRIV_SESSION_RD_ATTR(field) \ do { \ priv->session_attrs[count] = &class_device_attr_priv_sess_##field; \ count++; \ } while (0) + #define SETUP_SESSION_RD_ATTR(field, param_flag) \ do { \ if (tt->param_mask & param_flag) { \ @@ -1292,12 +1386,6 @@ do { \ } \ } while (0) -#define SETUP_PRIV_CONN_RD_ATTR(field) \ -do { \ - priv->conn_attrs[count] = &class_device_attr_priv_conn_##field; \ - count++; \ -} while (0) - #define SETUP_CONN_RD_ATTR(field, param_flag) \ do { \ if (tt->param_mask & param_flag) { \ @@ -1388,6 +1476,7 @@ iscsi_register_transport(struct iscsi_transport *tt) if (!priv) return NULL; INIT_LIST_HEAD(&priv->list); + priv->daemon_pid = -1; priv->iscsi_transport = tt; priv->t.user_scan = iscsi_user_scan; @@ -1424,16 +1513,8 @@ iscsi_register_transport(struct iscsi_transport *tt) SETUP_CONN_RD_ATTR(address, ISCSI_CONN_ADDRESS); SETUP_CONN_RD_ATTR(port, ISCSI_CONN_PORT); SETUP_CONN_RD_ATTR(exp_statsn, ISCSI_EXP_STATSN); - - if (tt->param_mask & ISCSI_PERSISTENT_ADDRESS) - SETUP_CONN_RD_ATTR(persistent_address, ISCSI_PERSISTENT_ADDRESS); - else - SETUP_PRIV_CONN_RD_ATTR(persistent_address); - - if (tt->param_mask & ISCSI_PERSISTENT_PORT) - SETUP_CONN_RD_ATTR(persistent_port, ISCSI_PERSISTENT_PORT); - else - SETUP_PRIV_CONN_RD_ATTR(persistent_port); + SETUP_CONN_RD_ATTR(persistent_address, ISCSI_PERSISTENT_ADDRESS); + SETUP_CONN_RD_ATTR(persistent_port, ISCSI_PERSISTENT_PORT); BUG_ON(count > ISCSI_CONN_ATTRS); priv->conn_attrs[count] = NULL; @@ -1453,18 +1534,10 @@ iscsi_register_transport(struct iscsi_transport *tt) SETUP_SESSION_RD_ATTR(data_pdu_in_order, ISCSI_PDU_INORDER_EN); SETUP_SESSION_RD_ATTR(data_seq_in_order, ISCSI_DATASEQ_INORDER_EN); SETUP_SESSION_RD_ATTR(erl, ISCSI_ERL); + SETUP_SESSION_RD_ATTR(targetname, ISCSI_TARGET_NAME); + SETUP_SESSION_RD_ATTR(tpgt, ISCSI_TPGT); SETUP_PRIV_SESSION_RD_ATTR(recovery_tmo); - if (tt->param_mask & ISCSI_TARGET_NAME) - SETUP_SESSION_RD_ATTR(targetname, ISCSI_TARGET_NAME); - else - SETUP_PRIV_SESSION_RD_ATTR(targetname); - - if (tt->param_mask & ISCSI_TPGT) - SETUP_SESSION_RD_ATTR(tpgt, ISCSI_TPGT); - else - SETUP_PRIV_SESSION_RD_ATTR(tpgt); - BUG_ON(count > ISCSI_SESSION_ATTRS); priv->session_attrs[count] = NULL; @@ -1541,6 +1614,9 @@ static __init int iscsi_transport_init(void) { int err; + printk(KERN_INFO "Loading iSCSI transport class v%s.", + ISCSI_TRANSPORT_VERSION); + err = class_register(&iscsi_transport_class); if (err) return err; @@ -1606,3 +1682,4 @@ MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu>, " "Alex Aizman <itn780@yahoo.com>"); MODULE_DESCRIPTION("iSCSI Transport Interface"); MODULE_LICENSE("GPL"); +MODULE_VERSION(ISCSI_TRANSPORT_VERSION); diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index 1fe6b2d0185..b5b0c2cba96 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -41,6 +41,7 @@ struct sas_host_attrs { struct mutex lock; u32 next_target_id; u32 next_expander_id; + int next_port_id; }; #define to_sas_host_attrs(host) ((struct sas_host_attrs *)(host)->shost_data) @@ -76,6 +77,24 @@ get_sas_##title##_names(u32 table_key, char *buf) \ return len; \ } +#define sas_bitfield_name_set(title, table) \ +static ssize_t \ +set_sas_##title##_names(u32 *table_key, const char *buf) \ +{ \ + ssize_t len = 0; \ + int i; \ + \ + for (i = 0; i < ARRAY_SIZE(table); i++) { \ + len = strlen(table[i].name); \ + if (strncmp(buf, table[i].name, len) == 0 && \ + (buf[len] == '\n' || buf[len] == '\0')) { \ + *table_key = table[i].value; \ + return 0; \ + } \ + } \ + return -EINVAL; \ +} + #define sas_bitfield_name_search(title, table) \ static ssize_t \ get_sas_##title##_names(u32 table_key, char *buf) \ @@ -130,7 +149,7 @@ static struct { { SAS_LINK_RATE_6_0_GBPS, "6.0 Gbit" }, }; sas_bitfield_name_search(linkspeed, sas_linkspeed_names) - +sas_bitfield_name_set(linkspeed, sas_linkspeed_names) /* * SAS host attributes @@ -146,6 +165,7 @@ static int sas_host_setup(struct transport_container *tc, struct device *dev, mutex_init(&sas_host->lock); sas_host->next_target_id = 0; sas_host->next_expander_id = 0; + sas_host->next_port_id = 0; return 0; } @@ -174,12 +194,29 @@ static int sas_host_match(struct attribute_container *cont, static int do_sas_phy_delete(struct device *dev, void *data) { - if (scsi_is_sas_phy(dev)) + int pass = (int)(unsigned long)data; + + if (pass == 0 && scsi_is_sas_port(dev)) + sas_port_delete(dev_to_sas_port(dev)); + else if (pass == 1 && scsi_is_sas_phy(dev)) sas_phy_delete(dev_to_phy(dev)); return 0; } /** + * sas_remove_children -- tear down a devices SAS data structures + * @dev: device belonging to the sas object + * + * Removes all SAS PHYs and remote PHYs for a given object + */ +void sas_remove_children(struct device *dev) +{ + device_for_each_child(dev, (void *)0, do_sas_phy_delete); + device_for_each_child(dev, (void *)1, do_sas_phy_delete); +} +EXPORT_SYMBOL(sas_remove_children); + +/** * sas_remove_host -- tear down a Scsi_Host's SAS data structures * @shost: Scsi Host that is torn down * @@ -188,13 +225,13 @@ static int do_sas_phy_delete(struct device *dev, void *data) */ void sas_remove_host(struct Scsi_Host *shost) { - device_for_each_child(&shost->shost_gendev, NULL, do_sas_phy_delete); + sas_remove_children(&shost->shost_gendev); } EXPORT_SYMBOL(sas_remove_host); /* - * SAS Port attributes + * SAS Phy attributes */ #define sas_phy_show_simple(field, name, format_string, cast) \ @@ -234,10 +271,39 @@ show_sas_phy_##field(struct class_device *cdev, char *buf) \ return get_sas_linkspeed_names(phy->field, buf); \ } +/* Fudge to tell if we're minimum or maximum */ +#define sas_phy_store_linkspeed(field) \ +static ssize_t \ +store_sas_phy_##field(struct class_device *cdev, const char *buf, \ + size_t count) \ +{ \ + struct sas_phy *phy = transport_class_to_phy(cdev); \ + struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); \ + struct sas_internal *i = to_sas_internal(shost->transportt); \ + u32 value; \ + struct sas_phy_linkrates rates = {0}; \ + int error; \ + \ + error = set_sas_linkspeed_names(&value, buf); \ + if (error) \ + return error; \ + rates.field = value; \ + error = i->f->set_phy_speed(phy, &rates); \ + \ + return error ? error : count; \ +} + +#define sas_phy_linkspeed_rw_attr(field) \ + sas_phy_show_linkspeed(field) \ + sas_phy_store_linkspeed(field) \ +static CLASS_DEVICE_ATTR(field, S_IRUGO, show_sas_phy_##field, \ + store_sas_phy_##field) + #define sas_phy_linkspeed_attr(field) \ sas_phy_show_linkspeed(field) \ static CLASS_DEVICE_ATTR(field, S_IRUGO, show_sas_phy_##field, NULL) + #define sas_phy_show_linkerror(field) \ static ssize_t \ show_sas_phy_##field(struct class_device *cdev, char *buf) \ @@ -247,9 +313,6 @@ show_sas_phy_##field(struct class_device *cdev, char *buf) \ struct sas_internal *i = to_sas_internal(shost->transportt); \ int error; \ \ - if (!phy->local_attached) \ - return -EINVAL; \ - \ error = i->f->get_linkerrors ? i->f->get_linkerrors(phy) : 0; \ if (error) \ return error; \ @@ -280,9 +343,6 @@ static ssize_t do_sas_phy_reset(struct class_device *cdev, struct sas_internal *i = to_sas_internal(shost->transportt); int error; - if (!phy->local_attached) - return -EINVAL; - error = i->f->phy_reset(phy, hard_reset); if (error) return error; @@ -310,12 +370,12 @@ sas_phy_protocol_attr(identify.target_port_protocols, sas_phy_simple_attr(identify.sas_address, sas_address, "0x%016llx\n", unsigned long long); sas_phy_simple_attr(identify.phy_identifier, phy_identifier, "%d\n", u8); -sas_phy_simple_attr(port_identifier, port_identifier, "%d\n", u8); +//sas_phy_simple_attr(port_identifier, port_identifier, "%d\n", int); sas_phy_linkspeed_attr(negotiated_linkrate); sas_phy_linkspeed_attr(minimum_linkrate_hw); -sas_phy_linkspeed_attr(minimum_linkrate); +sas_phy_linkspeed_rw_attr(minimum_linkrate); sas_phy_linkspeed_attr(maximum_linkrate_hw); -sas_phy_linkspeed_attr(maximum_linkrate); +sas_phy_linkspeed_rw_attr(maximum_linkrate); sas_phy_linkerror_attr(invalid_dword_count); sas_phy_linkerror_attr(running_disparity_error_count); sas_phy_linkerror_attr(loss_of_dword_sync_count); @@ -378,9 +438,10 @@ struct sas_phy *sas_phy_alloc(struct device *parent, int number) device_initialize(&phy->dev); phy->dev.parent = get_device(parent); phy->dev.release = sas_phy_release; + INIT_LIST_HEAD(&phy->port_siblings); if (scsi_is_sas_expander_device(parent)) { struct sas_rphy *rphy = dev_to_rphy(parent); - sprintf(phy->dev.bus_id, "phy-%d-%d:%d", shost->host_no, + sprintf(phy->dev.bus_id, "phy-%d:%d:%d", shost->host_no, rphy->scsi_target_id, number); } else sprintf(phy->dev.bus_id, "phy-%d:%d", shost->host_no, number); @@ -440,8 +501,8 @@ sas_phy_delete(struct sas_phy *phy) { struct device *dev = &phy->dev; - if (phy->rphy) - sas_rphy_delete(phy->rphy); + /* this happens if the phy is still part of a port when deleted */ + BUG_ON(!list_empty(&phy->port_siblings)); transport_remove_device(dev); device_del(dev); @@ -464,6 +525,310 @@ int scsi_is_sas_phy(const struct device *dev) EXPORT_SYMBOL(scsi_is_sas_phy); /* + * SAS Port attributes + */ +#define sas_port_show_simple(field, name, format_string, cast) \ +static ssize_t \ +show_sas_port_##name(struct class_device *cdev, char *buf) \ +{ \ + struct sas_port *port = transport_class_to_sas_port(cdev); \ + \ + return snprintf(buf, 20, format_string, cast port->field); \ +} + +#define sas_port_simple_attr(field, name, format_string, type) \ + sas_port_show_simple(field, name, format_string, (type)) \ +static CLASS_DEVICE_ATTR(name, S_IRUGO, show_sas_port_##name, NULL) + +sas_port_simple_attr(num_phys, num_phys, "%d\n", int); + +static DECLARE_TRANSPORT_CLASS(sas_port_class, + "sas_port", NULL, NULL, NULL); + +static int sas_port_match(struct attribute_container *cont, struct device *dev) +{ + struct Scsi_Host *shost; + struct sas_internal *i; + + if (!scsi_is_sas_port(dev)) + return 0; + shost = dev_to_shost(dev->parent); + + if (!shost->transportt) + return 0; + if (shost->transportt->host_attrs.ac.class != + &sas_host_class.class) + return 0; + + i = to_sas_internal(shost->transportt); + return &i->port_attr_cont.ac == cont; +} + + +static void sas_port_release(struct device *dev) +{ + struct sas_port *port = dev_to_sas_port(dev); + + BUG_ON(!list_empty(&port->phy_list)); + + put_device(dev->parent); + kfree(port); +} + +static void sas_port_create_link(struct sas_port *port, + struct sas_phy *phy) +{ + sysfs_create_link(&port->dev.kobj, &phy->dev.kobj, phy->dev.bus_id); + sysfs_create_link(&phy->dev.kobj, &port->dev.kobj, "port"); +} + +static void sas_port_delete_link(struct sas_port *port, + struct sas_phy *phy) +{ + sysfs_remove_link(&port->dev.kobj, phy->dev.bus_id); + sysfs_remove_link(&phy->dev.kobj, "port"); +} + +/** sas_port_alloc - allocate and initialize a SAS port structure + * + * @parent: parent device + * @port_id: port number + * + * Allocates a SAS port structure. It will be added to the device tree + * below the device specified by @parent which must be either a Scsi_Host + * or a sas_expander_device. + * + * Returns %NULL on error + */ +struct sas_port *sas_port_alloc(struct device *parent, int port_id) +{ + struct Scsi_Host *shost = dev_to_shost(parent); + struct sas_port *port; + + port = kzalloc(sizeof(*port), GFP_KERNEL); + if (!port) + return NULL; + + port->port_identifier = port_id; + + device_initialize(&port->dev); + + port->dev.parent = get_device(parent); + port->dev.release = sas_port_release; + + mutex_init(&port->phy_list_mutex); + INIT_LIST_HEAD(&port->phy_list); + + if (scsi_is_sas_expander_device(parent)) { + struct sas_rphy *rphy = dev_to_rphy(parent); + sprintf(port->dev.bus_id, "port-%d:%d:%d", shost->host_no, + rphy->scsi_target_id, port->port_identifier); + } else + sprintf(port->dev.bus_id, "port-%d:%d", shost->host_no, + port->port_identifier); + + transport_setup_device(&port->dev); + + return port; +} +EXPORT_SYMBOL(sas_port_alloc); + +/** sas_port_alloc_num - allocate and initialize a SAS port structure + * + * @parent: parent device + * + * Allocates a SAS port structure and a number to go with it. This + * interface is really for adapters where the port number has no + * meansing, so the sas class should manage them. It will be added to + * the device tree below the device specified by @parent which must be + * either a Scsi_Host or a sas_expander_device. + * + * Returns %NULL on error + */ +struct sas_port *sas_port_alloc_num(struct device *parent) +{ + int index; + struct Scsi_Host *shost = dev_to_shost(parent); + struct sas_host_attrs *sas_host = to_sas_host_attrs(shost); + + /* FIXME: use idr for this eventually */ + mutex_lock(&sas_host->lock); + if (scsi_is_sas_expander_device(parent)) { + struct sas_rphy *rphy = dev_to_rphy(parent); + struct sas_expander_device *exp = rphy_to_expander_device(rphy); + + index = exp->next_port_id++; + } else + index = sas_host->next_port_id++; + mutex_unlock(&sas_host->lock); + return sas_port_alloc(parent, index); +} +EXPORT_SYMBOL(sas_port_alloc_num); + +/** + * sas_port_add - add a SAS port to the device hierarchy + * + * @port: port to be added + * + * publishes a port to the rest of the system + */ +int sas_port_add(struct sas_port *port) +{ + int error; + + /* No phys should be added until this is made visible */ + BUG_ON(!list_empty(&port->phy_list)); + + error = device_add(&port->dev); + + if (error) + return error; + + transport_add_device(&port->dev); + transport_configure_device(&port->dev); + + return 0; +} +EXPORT_SYMBOL(sas_port_add); + +/** + * sas_port_free -- free a SAS PORT + * @port: SAS PORT to free + * + * Frees the specified SAS PORT. + * + * Note: + * This function must only be called on a PORT that has not + * sucessfully been added using sas_port_add(). + */ +void sas_port_free(struct sas_port *port) +{ + transport_destroy_device(&port->dev); + put_device(&port->dev); +} +EXPORT_SYMBOL(sas_port_free); + +/** + * sas_port_delete -- remove SAS PORT + * @port: SAS PORT to remove + * + * Removes the specified SAS PORT. If the SAS PORT has an + * associated phys, unlink them from the port as well. + */ +void sas_port_delete(struct sas_port *port) +{ + struct device *dev = &port->dev; + struct sas_phy *phy, *tmp_phy; + + if (port->rphy) { + sas_rphy_delete(port->rphy); + port->rphy = NULL; + } + + mutex_lock(&port->phy_list_mutex); + list_for_each_entry_safe(phy, tmp_phy, &port->phy_list, + port_siblings) { + sas_port_delete_link(port, phy); + list_del_init(&phy->port_siblings); + } + mutex_unlock(&port->phy_list_mutex); + + if (port->is_backlink) { + struct device *parent = port->dev.parent; + + sysfs_remove_link(&port->dev.kobj, parent->bus_id); + port->is_backlink = 0; + } + + transport_remove_device(dev); + device_del(dev); + transport_destroy_device(dev); + put_device(dev); +} +EXPORT_SYMBOL(sas_port_delete); + +/** + * scsi_is_sas_port -- check if a struct device represents a SAS port + * @dev: device to check + * + * Returns: + * %1 if the device represents a SAS Port, %0 else + */ +int scsi_is_sas_port(const struct device *dev) +{ + return dev->release == sas_port_release; +} +EXPORT_SYMBOL(scsi_is_sas_port); + +/** + * sas_port_add_phy - add another phy to a port to form a wide port + * @port: port to add the phy to + * @phy: phy to add + * + * When a port is initially created, it is empty (has no phys). All + * ports must have at least one phy to operated, and all wide ports + * must have at least two. The current code makes no difference + * between ports and wide ports, but the only object that can be + * connected to a remote device is a port, so ports must be formed on + * all devices with phys if they're connected to anything. + */ +void sas_port_add_phy(struct sas_port *port, struct sas_phy *phy) +{ + mutex_lock(&port->phy_list_mutex); + if (unlikely(!list_empty(&phy->port_siblings))) { + /* make sure we're already on this port */ + struct sas_phy *tmp; + + list_for_each_entry(tmp, &port->phy_list, port_siblings) + if (tmp == phy) + break; + /* If this trips, you added a phy that was already + * part of a different port */ + if (unlikely(tmp != phy)) { + dev_printk(KERN_ERR, &port->dev, "trying to add phy %s fails: it's already part of another port\n", phy->dev.bus_id); + BUG(); + } + } else { + sas_port_create_link(port, phy); + list_add_tail(&phy->port_siblings, &port->phy_list); + port->num_phys++; + } + mutex_unlock(&port->phy_list_mutex); +} +EXPORT_SYMBOL(sas_port_add_phy); + +/** + * sas_port_delete_phy - remove a phy from a port or wide port + * @port: port to remove the phy from + * @phy: phy to remove + * + * This operation is used for tearing down ports again. It must be + * done to every port or wide port before calling sas_port_delete. + */ +void sas_port_delete_phy(struct sas_port *port, struct sas_phy *phy) +{ + mutex_lock(&port->phy_list_mutex); + sas_port_delete_link(port, phy); + list_del_init(&phy->port_siblings); + port->num_phys--; + mutex_unlock(&port->phy_list_mutex); +} +EXPORT_SYMBOL(sas_port_delete_phy); + +void sas_port_mark_backlink(struct sas_port *port) +{ + struct device *parent = port->dev.parent->parent->parent; + + if (port->is_backlink) + return; + port->is_backlink = 1; + sysfs_create_link(&port->dev.kobj, &parent->kobj, + parent->bus_id); + +} +EXPORT_SYMBOL(sas_port_mark_backlink); + +/* * SAS remote PHY attributes. */ @@ -525,7 +890,7 @@ show_sas_rphy_enclosure_identifier(struct class_device *cdev, char *buf) * Only devices behind an expander are supported, because the * enclosure identifier is a SMP feature. */ - if (phy->local_attached) + if (scsi_is_sas_phy_local(phy)) return -EINVAL; error = i->f->get_enclosure_identifier(rphy, &identifier); @@ -546,7 +911,7 @@ show_sas_rphy_bay_identifier(struct class_device *cdev, char *buf) struct sas_internal *i = to_sas_internal(shost->transportt); int val; - if (phy->local_attached) + if (scsi_is_sas_phy_local(phy)) return -EINVAL; val = i->f->get_bay_identifier(rphy); @@ -767,7 +1132,7 @@ static void sas_rphy_initialize(struct sas_rphy *rphy) * Returns: * SAS PHY allocated or %NULL if the allocation failed. */ -struct sas_rphy *sas_end_device_alloc(struct sas_phy *parent) +struct sas_rphy *sas_end_device_alloc(struct sas_port *parent) { struct Scsi_Host *shost = dev_to_shost(&parent->dev); struct sas_end_device *rdev; @@ -780,8 +1145,13 @@ struct sas_rphy *sas_end_device_alloc(struct sas_phy *parent) device_initialize(&rdev->rphy.dev); rdev->rphy.dev.parent = get_device(&parent->dev); rdev->rphy.dev.release = sas_end_device_release; - sprintf(rdev->rphy.dev.bus_id, "end_device-%d:%d-%d", - shost->host_no, parent->port_identifier, parent->number); + if (scsi_is_sas_expander_device(parent->dev.parent)) { + struct sas_rphy *rphy = dev_to_rphy(parent->dev.parent); + sprintf(rdev->rphy.dev.bus_id, "end_device-%d:%d:%d", + shost->host_no, rphy->scsi_target_id, parent->port_identifier); + } else + sprintf(rdev->rphy.dev.bus_id, "end_device-%d:%d", + shost->host_no, parent->port_identifier); rdev->rphy.identify.device_type = SAS_END_DEVICE; sas_rphy_initialize(&rdev->rphy); transport_setup_device(&rdev->rphy.dev); @@ -798,7 +1168,7 @@ EXPORT_SYMBOL(sas_end_device_alloc); * Returns: * SAS PHY allocated or %NULL if the allocation failed. */ -struct sas_rphy *sas_expander_alloc(struct sas_phy *parent, +struct sas_rphy *sas_expander_alloc(struct sas_port *parent, enum sas_device_type type) { struct Scsi_Host *shost = dev_to_shost(&parent->dev); @@ -837,7 +1207,7 @@ EXPORT_SYMBOL(sas_expander_alloc); */ int sas_rphy_add(struct sas_rphy *rphy) { - struct sas_phy *parent = dev_to_phy(rphy->dev.parent); + struct sas_port *parent = dev_to_sas_port(rphy->dev.parent); struct Scsi_Host *shost = dev_to_shost(parent->dev.parent); struct sas_host_attrs *sas_host = to_sas_host_attrs(shost); struct sas_identify *identify = &rphy->identify; @@ -865,7 +1235,7 @@ int sas_rphy_add(struct sas_rphy *rphy) if (identify->device_type == SAS_END_DEVICE && rphy->scsi_target_id != -1) { - scsi_scan_target(&rphy->dev, parent->port_identifier, + scsi_scan_target(&rphy->dev, 0, rphy->scsi_target_id, ~0, 0); } @@ -910,7 +1280,7 @@ void sas_rphy_delete(struct sas_rphy *rphy) { struct device *dev = &rphy->dev; - struct sas_phy *parent = dev_to_phy(dev->parent); + struct sas_port *parent = dev_to_sas_port(dev->parent); struct Scsi_Host *shost = dev_to_shost(parent->dev.parent); struct sas_host_attrs *sas_host = to_sas_host_attrs(shost); @@ -920,7 +1290,7 @@ sas_rphy_delete(struct sas_rphy *rphy) break; case SAS_EDGE_EXPANDER_DEVICE: case SAS_FANOUT_EXPANDER_DEVICE: - device_for_each_child(dev, NULL, do_sas_phy_delete); + sas_remove_children(dev); break; default: break; @@ -967,15 +1337,13 @@ static int sas_user_scan(struct Scsi_Host *shost, uint channel, mutex_lock(&sas_host->lock); list_for_each_entry(rphy, &sas_host->rphy_list, list) { - struct sas_phy *parent = dev_to_phy(rphy->dev.parent); - if (rphy->identify.device_type != SAS_END_DEVICE || rphy->scsi_target_id == -1) continue; - if ((channel == SCAN_WILD_CARD || channel == parent->port_identifier) && + if ((channel == SCAN_WILD_CARD || channel == 0) && (id == SCAN_WILD_CARD || id == rphy->scsi_target_id)) { - scsi_scan_target(&rphy->dev, parent->port_identifier, + scsi_scan_target(&rphy->dev, 0, rphy->scsi_target_id, lun, 1); } } @@ -989,13 +1357,23 @@ static int sas_user_scan(struct Scsi_Host *shost, uint channel, * Setup / Teardown code */ -#define SETUP_TEMPLATE(attrb, field, perm, test) \ +#define SETUP_TEMPLATE(attrb, field, perm, test) \ i->private_##attrb[count] = class_device_attr_##field; \ i->private_##attrb[count].attr.mode = perm; \ i->attrb[count] = &i->private_##attrb[count]; \ if (test) \ count++ +#define SETUP_TEMPLATE_RW(attrb, field, perm, test, ro_test, ro_perm) \ + i->private_##attrb[count] = class_device_attr_##field; \ + i->private_##attrb[count].attr.mode = perm; \ + if (ro_test) { \ + i->private_##attrb[count].attr.mode = ro_perm; \ + i->private_##attrb[count].store = NULL; \ + } \ + i->attrb[count] = &i->private_##attrb[count]; \ + if (test) \ + count++ #define SETUP_RPORT_ATTRIBUTE(field) \ SETUP_TEMPLATE(rphy_attrs, field, S_IRUGO, 1) @@ -1003,16 +1381,23 @@ static int sas_user_scan(struct Scsi_Host *shost, uint channel, #define SETUP_OPTIONAL_RPORT_ATTRIBUTE(field, func) \ SETUP_TEMPLATE(rphy_attrs, field, S_IRUGO, i->f->func) -#define SETUP_PORT_ATTRIBUTE(field) \ +#define SETUP_PHY_ATTRIBUTE(field) \ SETUP_TEMPLATE(phy_attrs, field, S_IRUGO, 1) -#define SETUP_OPTIONAL_PORT_ATTRIBUTE(field, func) \ +#define SETUP_PHY_ATTRIBUTE_RW(field) \ + SETUP_TEMPLATE_RW(phy_attrs, field, S_IRUGO | S_IWUSR, 1, \ + !i->f->set_phy_speed, S_IRUGO) + +#define SETUP_PORT_ATTRIBUTE(field) \ + SETUP_TEMPLATE(port_attrs, field, S_IRUGO, 1) + +#define SETUP_OPTIONAL_PHY_ATTRIBUTE(field, func) \ SETUP_TEMPLATE(phy_attrs, field, S_IRUGO, i->f->func) -#define SETUP_PORT_ATTRIBUTE_WRONLY(field) \ +#define SETUP_PHY_ATTRIBUTE_WRONLY(field) \ SETUP_TEMPLATE(phy_attrs, field, S_IWUGO, 1) -#define SETUP_OPTIONAL_PORT_ATTRIBUTE_WRONLY(field, func) \ +#define SETUP_OPTIONAL_PHY_ATTRIBUTE_WRONLY(field, func) \ SETUP_TEMPLATE(phy_attrs, field, S_IWUGO, i->f->func) #define SETUP_END_DEV_ATTRIBUTE(field) \ @@ -1048,6 +1433,11 @@ sas_attach_transport(struct sas_function_template *ft) i->phy_attr_cont.ac.match = sas_phy_match; transport_container_register(&i->phy_attr_cont); + i->port_attr_cont.ac.class = &sas_port_class.class; + i->port_attr_cont.ac.attrs = &i->port_attrs[0]; + i->port_attr_cont.ac.match = sas_port_match; + transport_container_register(&i->port_attr_cont); + i->rphy_attr_cont.ac.class = &sas_rphy_class.class; i->rphy_attr_cont.ac.attrs = &i->rphy_attrs[0]; i->rphy_attr_cont.ac.match = sas_rphy_match; @@ -1066,30 +1456,35 @@ sas_attach_transport(struct sas_function_template *ft) i->f = ft; count = 0; + SETUP_PORT_ATTRIBUTE(num_phys); i->host_attrs[count] = NULL; count = 0; - SETUP_PORT_ATTRIBUTE(initiator_port_protocols); - SETUP_PORT_ATTRIBUTE(target_port_protocols); - SETUP_PORT_ATTRIBUTE(device_type); - SETUP_PORT_ATTRIBUTE(sas_address); - SETUP_PORT_ATTRIBUTE(phy_identifier); - SETUP_PORT_ATTRIBUTE(port_identifier); - SETUP_PORT_ATTRIBUTE(negotiated_linkrate); - SETUP_PORT_ATTRIBUTE(minimum_linkrate_hw); - SETUP_PORT_ATTRIBUTE(minimum_linkrate); - SETUP_PORT_ATTRIBUTE(maximum_linkrate_hw); - SETUP_PORT_ATTRIBUTE(maximum_linkrate); - - SETUP_PORT_ATTRIBUTE(invalid_dword_count); - SETUP_PORT_ATTRIBUTE(running_disparity_error_count); - SETUP_PORT_ATTRIBUTE(loss_of_dword_sync_count); - SETUP_PORT_ATTRIBUTE(phy_reset_problem_count); - SETUP_OPTIONAL_PORT_ATTRIBUTE_WRONLY(link_reset, phy_reset); - SETUP_OPTIONAL_PORT_ATTRIBUTE_WRONLY(hard_reset, phy_reset); + SETUP_PHY_ATTRIBUTE(initiator_port_protocols); + SETUP_PHY_ATTRIBUTE(target_port_protocols); + SETUP_PHY_ATTRIBUTE(device_type); + SETUP_PHY_ATTRIBUTE(sas_address); + SETUP_PHY_ATTRIBUTE(phy_identifier); + //SETUP_PHY_ATTRIBUTE(port_identifier); + SETUP_PHY_ATTRIBUTE(negotiated_linkrate); + SETUP_PHY_ATTRIBUTE(minimum_linkrate_hw); + SETUP_PHY_ATTRIBUTE_RW(minimum_linkrate); + SETUP_PHY_ATTRIBUTE(maximum_linkrate_hw); + SETUP_PHY_ATTRIBUTE_RW(maximum_linkrate); + + SETUP_PHY_ATTRIBUTE(invalid_dword_count); + SETUP_PHY_ATTRIBUTE(running_disparity_error_count); + SETUP_PHY_ATTRIBUTE(loss_of_dword_sync_count); + SETUP_PHY_ATTRIBUTE(phy_reset_problem_count); + SETUP_OPTIONAL_PHY_ATTRIBUTE_WRONLY(link_reset, phy_reset); + SETUP_OPTIONAL_PHY_ATTRIBUTE_WRONLY(hard_reset, phy_reset); i->phy_attrs[count] = NULL; count = 0; + SETUP_PORT_ATTRIBUTE(num_phys); + i->port_attrs[count] = NULL; + + count = 0; SETUP_RPORT_ATTRIBUTE(rphy_initiator_port_protocols); SETUP_RPORT_ATTRIBUTE(rphy_target_port_protocols); SETUP_RPORT_ATTRIBUTE(rphy_device_type); @@ -1131,6 +1526,7 @@ void sas_release_transport(struct scsi_transport_template *t) transport_container_unregister(&i->t.host_attrs); transport_container_unregister(&i->phy_attr_cont); + transport_container_unregister(&i->port_attr_cont); transport_container_unregister(&i->rphy_attr_cont); transport_container_unregister(&i->end_dev_attr_cont); transport_container_unregister(&i->expander_attr_cont); @@ -1149,9 +1545,12 @@ static __init int sas_transport_init(void) error = transport_class_register(&sas_phy_class); if (error) goto out_unregister_transport; - error = transport_class_register(&sas_rphy_class); + error = transport_class_register(&sas_port_class); if (error) goto out_unregister_phy; + error = transport_class_register(&sas_rphy_class); + if (error) + goto out_unregister_port; error = transport_class_register(&sas_end_dev_class); if (error) goto out_unregister_rphy; @@ -1165,6 +1564,8 @@ static __init int sas_transport_init(void) transport_class_unregister(&sas_end_dev_class); out_unregister_rphy: transport_class_unregister(&sas_rphy_class); + out_unregister_port: + transport_class_unregister(&sas_port_class); out_unregister_phy: transport_class_unregister(&sas_phy_class); out_unregister_transport: @@ -1178,6 +1579,7 @@ static void __exit sas_transport_exit(void) { transport_class_unregister(&sas_host_class); transport_class_unregister(&sas_phy_class); + transport_class_unregister(&sas_port_class); transport_class_unregister(&sas_rphy_class); transport_class_unregister(&sas_end_dev_class); transport_class_unregister(&sas_expander_class); diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index ace49d5bd9c..9f070f0d0f2 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -18,7 +18,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/config.h> #include <linux/ctype.h> #include <linux/init.h> #include <linux/module.h> @@ -48,6 +47,7 @@ /* Private data accessors (keep these out of the header file) */ #define spi_dv_pending(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_pending) +#define spi_dv_in_progress(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_in_progress) #define spi_dv_mutex(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_mutex) struct spi_internal { @@ -241,6 +241,7 @@ static int spi_setup_transport_attrs(struct transport_container *tc, spi_pcomp_en(starget) = 0; spi_hold_mcs(starget) = 0; spi_dv_pending(starget) = 0; + spi_dv_in_progress(starget) = 0; spi_initial_dv(starget) = 0; mutex_init(&spi_dv_mutex(starget)); @@ -831,28 +832,37 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer) DV_SET(period, spi_min_period(starget)); /* try QAS requests; this should be harmless to set if the * target supports it */ - if (scsi_device_qas(sdev)) + if (scsi_device_qas(sdev)) { DV_SET(qas, 1); - /* Also try IU transfers */ - if (scsi_device_ius(sdev)) + } else { + DV_SET(qas, 0); + } + + if (scsi_device_ius(sdev) && spi_min_period(starget) < 9) { + /* This u320 (or u640). Set IU transfers */ DV_SET(iu, 1); - if (spi_min_period(starget) < 9) { - /* This u320 (or u640). Ignore the coupled parameters - * like DT and IU, but set the optional ones */ + /* Then set the optional parameters */ DV_SET(rd_strm, 1); DV_SET(wr_flow, 1); DV_SET(rti, 1); if (spi_min_period(starget) == 8) DV_SET(pcomp_en, 1); + } else { + DV_SET(iu, 0); } + /* now that we've done all this, actually check the bus * signal type (if known). Some devices are stupid on * a SE bus and still claim they can try LVD only settings */ if (i->f->get_signalling) i->f->get_signalling(shost); if (spi_signalling(shost) == SPI_SIGNAL_SE || - spi_signalling(shost) == SPI_SIGNAL_HVD) + spi_signalling(shost) == SPI_SIGNAL_HVD || + !scsi_device_dt(sdev)) { DV_SET(dt, 0); + } else { + DV_SET(dt, 1); + } /* Do the read only INQUIRY tests */ spi_dv_retrain(sdev, buffer, buffer + sdev->inquiry_len, spi_dv_device_compare_inquiry); @@ -908,6 +918,10 @@ spi_dv_device(struct scsi_device *sdev) if (unlikely(scsi_device_get(sdev))) return; + if (unlikely(spi_dv_in_progress(starget))) + return; + spi_dv_in_progress(starget) = 1; + buffer = kzalloc(len, GFP_KERNEL); if (unlikely(!buffer)) @@ -939,6 +953,7 @@ spi_dv_device(struct scsi_device *sdev) out_free: kfree(buffer); out_put: + spi_dv_in_progress(starget) = 0; scsi_device_put(sdev); } EXPORT_SYMBOL(spi_dv_device); diff --git a/drivers/scsi/scsicam.c b/drivers/scsi/scsicam.c index b78354fc4b1..cd68a66c7bb 100644 --- a/drivers/scsi/scsicam.c +++ b/drivers/scsi/scsicam.c @@ -57,6 +57,7 @@ EXPORT_SYMBOL(scsi_bios_ptable); int scsicam_bios_param(struct block_device *bdev, sector_t capacity, int *ip) { unsigned char *p; + u64 capacity64 = capacity; /* Suppress gcc warning */ int ret; p = scsi_bios_ptable(bdev); @@ -68,7 +69,7 @@ int scsicam_bios_param(struct block_device *bdev, sector_t capacity, int *ip) (unsigned int *)ip + 0, (unsigned int *)ip + 1); kfree(p); - if (ret == -1) { + if (ret == -1 && capacity64 < (1ULL << 32)) { /* pick some standard mapping with at most 1024 cylinders, and at most 62 sectors per track - this works up to 7905 MB */ diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 35419901124..638cff41d43 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -32,7 +32,6 @@ * than the level indicated above to trigger output. */ -#include <linux/config.h> #include <linux/module.h> #include <linux/fs.h> #include <linux/kernel.h> @@ -208,6 +207,23 @@ static ssize_t sd_store_cache_type(struct class_device *cdev, const char *buf, return count; } +static ssize_t sd_store_allow_restart(struct class_device *cdev, const char *buf, + size_t count) +{ + struct scsi_disk *sdkp = to_scsi_disk(cdev); + struct scsi_device *sdp = sdkp->device; + + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + + if (sdp->type != TYPE_DISK) + return -EINVAL; + + sdp->allow_restart = simple_strtoul(buf, NULL, 10); + + return count; +} + static ssize_t sd_show_cache_type(struct class_device *cdev, char *buf) { struct scsi_disk *sdkp = to_scsi_disk(cdev); @@ -223,10 +239,19 @@ static ssize_t sd_show_fua(struct class_device *cdev, char *buf) return snprintf(buf, 20, "%u\n", sdkp->DPOFUA); } +static ssize_t sd_show_allow_restart(struct class_device *cdev, char *buf) +{ + struct scsi_disk *sdkp = to_scsi_disk(cdev); + + return snprintf(buf, 40, "%d\n", sdkp->device->allow_restart); +} + static struct class_device_attribute sd_disk_attrs[] = { __ATTR(cache_type, S_IRUGO|S_IWUSR, sd_show_cache_type, sd_store_cache_type), __ATTR(FUA, S_IRUGO, sd_show_fua, NULL), + __ATTR(allow_restart, S_IRUGO|S_IWUSR, sd_show_allow_restart, + sd_store_allow_restart), __ATTR_NULL, }; @@ -477,8 +502,7 @@ static int sd_init_command(struct scsi_cmnd * SCpnt) SCpnt->cmnd[4] = (unsigned char) this_count; SCpnt->cmnd[5] = 0; } - SCpnt->request_bufflen = SCpnt->bufflen = - this_count * sdp->sector_size; + SCpnt->request_bufflen = this_count * sdp->sector_size; /* * We shouldn't disconnect in the middle of a sector, so with a dumb @@ -891,11 +915,10 @@ static struct block_device_operations sd_fops = { static void sd_rw_intr(struct scsi_cmnd * SCpnt) { int result = SCpnt->result; - int this_count = SCpnt->request_bufflen; - int good_bytes = (result == 0 ? this_count : 0); - sector_t block_sectors = 1; - u64 first_err_block; - sector_t error_sector; + unsigned int xfer_size = SCpnt->request_bufflen; + unsigned int good_bytes = result ? 0 : xfer_size; + u64 start_lba = SCpnt->request->sector; + u64 bad_lba; struct scsi_sense_hdr sshdr; int sense_valid = 0; int sense_deferred = 0; @@ -906,7 +929,6 @@ static void sd_rw_intr(struct scsi_cmnd * SCpnt) if (sense_valid) sense_deferred = scsi_sense_is_deferred(&sshdr); } - #ifdef CONFIG_SCSI_LOGGING SCSI_LOG_HLCOMPLETE(1, printk("sd_rw_intr: %s: res=0x%x\n", SCpnt->request->rq_disk->disk_name, result)); @@ -916,89 +938,72 @@ static void sd_rw_intr(struct scsi_cmnd * SCpnt) sshdr.sense_key, sshdr.asc, sshdr.ascq)); } #endif - /* - Handle MEDIUM ERRORs that indicate partial success. Since this is a - relatively rare error condition, no care is taken to avoid - unnecessary additional work such as memcpy's that could be avoided. - */ - if (driver_byte(result) != 0 && - sense_valid && !sense_deferred) { - switch (sshdr.sense_key) { - case MEDIUM_ERROR: - if (!blk_fs_request(SCpnt->request)) - break; - info_valid = scsi_get_sense_info_fld( - SCpnt->sense_buffer, SCSI_SENSE_BUFFERSIZE, - &first_err_block); - /* - * May want to warn and skip if following cast results - * in actual truncation (if sector_t < 64 bits) - */ - error_sector = (sector_t)first_err_block; - if (SCpnt->request->bio != NULL) - block_sectors = bio_sectors(SCpnt->request->bio); - switch (SCpnt->device->sector_size) { - case 1024: - error_sector <<= 1; - if (block_sectors < 2) - block_sectors = 2; - break; - case 2048: - error_sector <<= 2; - if (block_sectors < 4) - block_sectors = 4; - break; - case 4096: - error_sector <<=3; - if (block_sectors < 8) - block_sectors = 8; - break; - case 256: - error_sector >>= 1; - break; - default: - break; - } + if (driver_byte(result) != DRIVER_SENSE && + (!sense_valid || sense_deferred)) + goto out; - error_sector &= ~(block_sectors - 1); - good_bytes = (error_sector - SCpnt->request->sector) << 9; - if (good_bytes < 0 || good_bytes >= this_count) - good_bytes = 0; + switch (sshdr.sense_key) { + case HARDWARE_ERROR: + case MEDIUM_ERROR: + if (!blk_fs_request(SCpnt->request)) + goto out; + info_valid = scsi_get_sense_info_fld(SCpnt->sense_buffer, + SCSI_SENSE_BUFFERSIZE, + &bad_lba); + if (!info_valid) + goto out; + if (xfer_size <= SCpnt->device->sector_size) + goto out; + switch (SCpnt->device->sector_size) { + case 256: + start_lba <<= 1; break; - - case RECOVERED_ERROR: /* an error occurred, but it recovered */ - case NO_SENSE: /* LLDD got sense data */ - /* - * Inform the user, but make sure that it's not treated - * as a hard error. - */ - scsi_print_sense("sd", SCpnt); - SCpnt->result = 0; - memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); - good_bytes = this_count; + case 512: break; - - case ILLEGAL_REQUEST: - if (SCpnt->device->use_10_for_rw && - (SCpnt->cmnd[0] == READ_10 || - SCpnt->cmnd[0] == WRITE_10)) - SCpnt->device->use_10_for_rw = 0; - if (SCpnt->device->use_10_for_ms && - (SCpnt->cmnd[0] == MODE_SENSE_10 || - SCpnt->cmnd[0] == MODE_SELECT_10)) - SCpnt->device->use_10_for_ms = 0; + case 1024: + start_lba >>= 1; + break; + case 2048: + start_lba >>= 2; + break; + case 4096: + start_lba >>= 3; break; - default: + /* Print something here with limiting frequency. */ + goto out; break; } + /* This computation should always be done in terms of + * the resolution of the device's medium. + */ + good_bytes = (bad_lba - start_lba)*SCpnt->device->sector_size; + break; + case RECOVERED_ERROR: + case NO_SENSE: + /* Inform the user, but make sure that it's not treated + * as a hard error. + */ + scsi_print_sense("sd", SCpnt); + SCpnt->result = 0; + memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); + good_bytes = xfer_size; + break; + case ILLEGAL_REQUEST: + if (SCpnt->device->use_10_for_rw && + (SCpnt->cmnd[0] == READ_10 || + SCpnt->cmnd[0] == WRITE_10)) + SCpnt->device->use_10_for_rw = 0; + if (SCpnt->device->use_10_for_ms && + (SCpnt->cmnd[0] == MODE_SENSE_10 || + SCpnt->cmnd[0] == MODE_SELECT_10)) + SCpnt->device->use_10_for_ms = 0; + break; + default: + break; } - /* - * This calls the generic completion function, now that we know - * how many actual sectors finished, and how many sectors we need - * to say have failed. - */ - scsi_io_completion(SCpnt, good_bytes, block_sectors << 9); + out: + scsi_io_completion(SCpnt, good_bytes); } static int media_not_present(struct scsi_disk *sdkp, @@ -1210,7 +1215,7 @@ repeat: /* Either no media are present but the drive didn't tell us, or they are present but the read capacity command fails */ /* sdkp->media_present = 0; -- not always correct */ - sdkp->capacity = 0x200000; /* 1 GB - random */ + sdkp->capacity = 0; /* unknown mapped to zero - as usual */ return; } else if (the_result && longrc) { diff --git a/drivers/scsi/seagate.c b/drivers/scsi/seagate.c index 7fa4da4ea64..2679ea8bff1 100644 --- a/drivers/scsi/seagate.c +++ b/drivers/scsi/seagate.c @@ -497,7 +497,7 @@ int __init seagate_st0x_detect (struct scsi_host_template * tpnt) return 0; hostno = instance->host_no; - if (request_irq (irq, do_seagate_reconnect_intr, SA_INTERRUPT, (controller_type == SEAGATE) ? "seagate" : "tmc-8xx", instance)) { + if (request_irq (irq, do_seagate_reconnect_intr, IRQF_DISABLED, (controller_type == SEAGATE) ? "seagate" : "tmc-8xx", instance)) { printk(KERN_ERR "scsi%d : unable to allocate IRQ%d\n", hostno, irq); return 0; } @@ -1002,7 +1002,7 @@ connect_loop: } #endif - buffer = (struct scatterlist *) SCint->buffer; + buffer = (struct scatterlist *) SCint->request_buffer; len = buffer->length; data = page_address(buffer->page) + buffer->offset; } else { diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 98b9312ba8d..34f9343ed0a 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -18,8 +18,8 @@ * */ -static int sg_version_num = 30533; /* 2 digits for each component */ -#define SG_VERSION_STR "3.5.33" +static int sg_version_num = 30534; /* 2 digits for each component */ +#define SG_VERSION_STR "3.5.34" /* * D. P. Gilbert (dgilbert@interlog.com, dougg@triode.net.au), notes: @@ -28,7 +28,6 @@ static int sg_version_num = 30533; /* 2 digits for each component */ * (otherwise the macros compile to empty statements). * */ -#include <linux/config.h> #include <linux/module.h> #include <linux/fs.h> @@ -61,7 +60,7 @@ static int sg_version_num = 30533; /* 2 digits for each component */ #ifdef CONFIG_SCSI_PROC_FS #include <linux/proc_fs.h> -static char *sg_version_date = "20050908"; +static char *sg_version_date = "20060818"; static int sg_proc_init(void); static void sg_proc_cleanup(void); @@ -1165,7 +1164,7 @@ sg_vma_nopage(struct vm_area_struct *vma, unsigned long addr, int *type) len = vma->vm_end - sa; len = (len < sg->length) ? len : sg->length; if (offset < len) { - page = sg->page; + page = virt_to_page(page_address(sg->page) + offset); get_page(page); /* increment page count */ break; } @@ -1402,6 +1401,7 @@ sg_add(struct class_device *cl_dev, struct class_interface *cl_intf) Sg_device *sdp = NULL; struct cdev * cdev = NULL; int error, k; + unsigned long iflags; disk = alloc_disk(1); if (!disk) { @@ -1429,7 +1429,7 @@ sg_add(struct class_device *cl_dev, struct class_interface *cl_intf) error = cdev_add(cdev, MKDEV(SCSI_GENERIC_MAJOR, k), 1); if (error) - goto out; + goto cdev_add_err; sdp->cdev = cdev; if (sg_sysfs_valid) { @@ -1456,6 +1456,13 @@ sg_add(struct class_device *cl_dev, struct class_interface *cl_intf) return 0; +cdev_add_err: + write_lock_irqsave(&sg_dev_arr_lock, iflags); + kfree(sg_dev_arr[k]); + sg_dev_arr[k] = NULL; + sg_nr_dev--; + write_unlock_irqrestore(&sg_dev_arr_lock, iflags); + out: put_disk(disk); if (cdev) diff --git a/drivers/scsi/sgiwd93.c b/drivers/scsi/sgiwd93.c index 7cd366fcc57..4f1db6f2aae 100644 --- a/drivers/scsi/sgiwd93.c +++ b/drivers/scsi/sgiwd93.c @@ -97,7 +97,7 @@ static irqreturn_t sgiwd93_intr(int irq, void *dev_id, struct pt_regs *regs) } static inline -void fill_hpc_entries(struct hpc_chunk *hcp, Scsi_Cmnd *cmd, int datainp) +void fill_hpc_entries(struct hpc_chunk *hcp, struct scsi_cmnd *cmd, int datainp) { unsigned long len = cmd->SCp.this_residual; void *addr = cmd->SCp.ptr; @@ -129,7 +129,7 @@ void fill_hpc_entries(struct hpc_chunk *hcp, Scsi_Cmnd *cmd, int datainp) hcp->desc.cntinfo = HPCDMA_EOX; } -static int dma_setup(Scsi_Cmnd *cmd, int datainp) +static int dma_setup(struct scsi_cmnd *cmd, int datainp) { struct ip22_hostdata *hdata = HDATA(cmd->device->host); struct hpc3_scsiregs *hregs = @@ -163,7 +163,7 @@ static int dma_setup(Scsi_Cmnd *cmd, int datainp) return 0; } -static void dma_stop(struct Scsi_Host *instance, Scsi_Cmnd *SCpnt, +static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, int status) { struct ip22_hostdata *hdata = HDATA(instance); @@ -305,7 +305,7 @@ static int sgiwd93_release(struct Scsi_Host *instance) return 1; } -static int sgiwd93_bus_reset(Scsi_Cmnd *cmd) +static int sgiwd93_bus_reset(struct scsi_cmnd *cmd) { /* FIXME perform bus-specific reset */ diff --git a/drivers/scsi/sim710.c b/drivers/scsi/sim710.c index 255886a9ac5..551baccec52 100644 --- a/drivers/scsi/sim710.c +++ b/drivers/scsi/sim710.c @@ -26,7 +26,6 @@ * */ -#include <linux/config.h> #include <linux/module.h> #include <linux/blkdev.h> @@ -134,7 +133,7 @@ sim710_probe_common(struct device *dev, unsigned long base_addr, host->this_id = scsi_id; host->base = base_addr; host->irq = irq; - if (request_irq(irq, NCR_700_intr, SA_SHIRQ, "sim710", host)) { + if (request_irq(irq, NCR_700_intr, IRQF_SHARED, "sim710", host)) { printk(KERN_ERR "sim710: request_irq failed\n"); goto out_put_host; } @@ -283,6 +282,7 @@ static struct eisa_device_id sim710_eisa_ids[] = { { "HWP0C80" }, { "" } }; +MODULE_DEVICE_TABLE(eisa, sim710_eisa_ids); static __init int sim710_eisa_probe(struct device *dev) diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index ebf6579ed69..fae6e95a629 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -292,7 +292,7 @@ static void rw_intr(struct scsi_cmnd * SCpnt) * how many actual sectors finished, and how many sectors we need * to say have failed. */ - scsi_io_completion(SCpnt, good_bytes, block_sectors << 9); + scsi_io_completion(SCpnt, good_bytes); } static int sr_init_command(struct scsi_cmnd * SCpnt) @@ -360,7 +360,7 @@ static int sr_init_command(struct scsi_cmnd * SCpnt) "mismatch count %d, bytes %d\n", size, SCpnt->request_bufflen); if (SCpnt->request_bufflen > size) - SCpnt->request_bufflen = SCpnt->bufflen = size; + SCpnt->request_bufflen = size; } } @@ -387,8 +387,7 @@ static int sr_init_command(struct scsi_cmnd * SCpnt) if (this_count > 0xffff) { this_count = 0xffff; - SCpnt->request_bufflen = SCpnt->bufflen = - this_count * s_size; + SCpnt->request_bufflen = this_count * s_size; } SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff; diff --git a/drivers/scsi/sr_vendor.c b/drivers/scsi/sr_vendor.c index 9dde8df2f5c..a3e9d0f2eb5 100644 --- a/drivers/scsi/sr_vendor.c +++ b/drivers/scsi/sr_vendor.c @@ -34,7 +34,6 @@ * HP 6020 writers now supported. */ -#include <linux/config.h> #include <linux/cdrom.h> #include <linux/errno.h> #include <linux/string.h> diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 1272dd249af..7f669b60067 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -368,7 +368,7 @@ static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt) SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2], SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]); if (cmdstatp->have_sense) - __scsi_print_sense("st", SRpnt->sense, SCSI_SENSE_BUFFERSIZE); + __scsi_print_sense(name, SRpnt->sense, SCSI_SENSE_BUFFERSIZE); } ) /* end DEB */ if (!debugging) { /* Abnormal conditions for tape */ if (!cmdstatp->have_sense) @@ -384,9 +384,8 @@ static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt) scode != VOLUME_OVERFLOW && SRpnt->cmd[0] != MODE_SENSE && SRpnt->cmd[0] != TEST_UNIT_READY) { - printk(KERN_WARNING "%s: Error with sense data: ", name); - __scsi_print_sense("st", SRpnt->sense, - SCSI_SENSE_BUFFERSIZE); + + __scsi_print_sense(name, SRpnt->sense, SCSI_SENSE_BUFFERSIZE); } } @@ -2818,7 +2817,7 @@ static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned lon (cmdstatp->sense_hdr.sense_key == NO_SENSE || cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) && undone == 0) { - ioctl_result = 0; /* EOF written succesfully at EOM */ + ioctl_result = 0; /* EOF written successfully at EOM */ if (fileno >= 0) fileno++; STps->drv_file = fileno; @@ -3599,7 +3598,6 @@ static struct st_buffer * tb->use_sg = max_sg; tb->frp = (struct st_buf_fragment *)(&(tb->sg[0]) + max_sg); - tb->in_use = 1; tb->dma = need_dma; tb->buffer_size = got; diff --git a/drivers/scsi/st.h b/drivers/scsi/st.h index 411209048d7..05a5cae126e 100644 --- a/drivers/scsi/st.h +++ b/drivers/scsi/st.h @@ -31,7 +31,6 @@ struct st_request { /* The tape buffer descriptor. */ struct st_buffer { - unsigned char in_use; unsigned char dma; /* DMA-able buffer */ unsigned char do_dio; /* direct i/o set up? */ int buffer_size; diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c new file mode 100644 index 00000000000..3cf3106a29b --- /dev/null +++ b/drivers/scsi/stex.c @@ -0,0 +1,1252 @@ +/* + * SuperTrak EX Series Storage Controller driver for Linux + * + * Copyright (C) 2005, 2006 Promise Technology Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Written By: + * Ed Lin <promise_linux@promise.com> + * + * Version: 2.9.0.13 + * + */ + +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/time.h> +#include <linux/pci.h> +#include <linux/blkdev.h> +#include <linux/interrupt.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/byteorder.h> +#include <scsi/scsi.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_tcq.h> + +#define DRV_NAME "stex" +#define ST_DRIVER_VERSION "2.9.0.13" +#define ST_VER_MAJOR 2 +#define ST_VER_MINOR 9 +#define ST_OEM 0 +#define ST_BUILD_VER 13 + +enum { + /* MU register offset */ + IMR0 = 0x10, /* MU_INBOUND_MESSAGE_REG0 */ + IMR1 = 0x14, /* MU_INBOUND_MESSAGE_REG1 */ + OMR0 = 0x18, /* MU_OUTBOUND_MESSAGE_REG0 */ + OMR1 = 0x1c, /* MU_OUTBOUND_MESSAGE_REG1 */ + IDBL = 0x20, /* MU_INBOUND_DOORBELL */ + IIS = 0x24, /* MU_INBOUND_INTERRUPT_STATUS */ + IIM = 0x28, /* MU_INBOUND_INTERRUPT_MASK */ + ODBL = 0x2c, /* MU_OUTBOUND_DOORBELL */ + OIS = 0x30, /* MU_OUTBOUND_INTERRUPT_STATUS */ + OIM = 0x3c, /* MU_OUTBOUND_INTERRUPT_MASK */ + + /* MU register value */ + MU_INBOUND_DOORBELL_HANDSHAKE = 1, + MU_INBOUND_DOORBELL_REQHEADCHANGED = 2, + MU_INBOUND_DOORBELL_STATUSTAILCHANGED = 4, + MU_INBOUND_DOORBELL_HMUSTOPPED = 8, + MU_INBOUND_DOORBELL_RESET = 16, + + MU_OUTBOUND_DOORBELL_HANDSHAKE = 1, + MU_OUTBOUND_DOORBELL_REQUESTTAILCHANGED = 2, + MU_OUTBOUND_DOORBELL_STATUSHEADCHANGED = 4, + MU_OUTBOUND_DOORBELL_BUSCHANGE = 8, + MU_OUTBOUND_DOORBELL_HASEVENT = 16, + + /* MU status code */ + MU_STATE_STARTING = 1, + MU_STATE_FMU_READY_FOR_HANDSHAKE = 2, + MU_STATE_SEND_HANDSHAKE_FRAME = 3, + MU_STATE_STARTED = 4, + MU_STATE_RESETTING = 5, + + MU_MAX_DELAY_TIME = 240000, + MU_HANDSHAKE_SIGNATURE = 0x55aaaa55, + HMU_PARTNER_TYPE = 2, + + /* firmware returned values */ + SRB_STATUS_SUCCESS = 0x01, + SRB_STATUS_ERROR = 0x04, + SRB_STATUS_BUSY = 0x05, + SRB_STATUS_INVALID_REQUEST = 0x06, + SRB_STATUS_SELECTION_TIMEOUT = 0x0A, + SRB_SEE_SENSE = 0x80, + + /* task attribute */ + TASK_ATTRIBUTE_SIMPLE = 0x0, + TASK_ATTRIBUTE_HEADOFQUEUE = 0x1, + TASK_ATTRIBUTE_ORDERED = 0x2, + TASK_ATTRIBUTE_ACA = 0x4, + + /* request count, etc. */ + MU_MAX_REQUEST = 32, + + /* one message wasted, use MU_MAX_REQUEST+1 + to handle MU_MAX_REQUEST messages */ + MU_REQ_COUNT = (MU_MAX_REQUEST + 1), + MU_STATUS_COUNT = (MU_MAX_REQUEST + 1), + + STEX_CDB_LENGTH = MAX_COMMAND_SIZE, + REQ_VARIABLE_LEN = 1024, + STATUS_VAR_LEN = 128, + ST_CAN_QUEUE = MU_MAX_REQUEST, + ST_CMD_PER_LUN = MU_MAX_REQUEST, + ST_MAX_SG = 32, + + /* sg flags */ + SG_CF_EOT = 0x80, /* end of table */ + SG_CF_64B = 0x40, /* 64 bit item */ + SG_CF_HOST = 0x20, /* sg in host memory */ + + ST_MAX_ARRAY_SUPPORTED = 16, + ST_MAX_TARGET_NUM = (ST_MAX_ARRAY_SUPPORTED+1), + ST_MAX_LUN_PER_TARGET = 16, + + st_shasta = 0, + st_vsc = 1, + + PASSTHRU_REQ_TYPE = 0x00000001, + PASSTHRU_REQ_NO_WAKEUP = 0x00000100, + ST_INTERNAL_TIMEOUT = 30, + + /* vendor specific commands of Promise */ + ARRAY_CMD = 0xe0, + CONTROLLER_CMD = 0xe1, + DEBUGGING_CMD = 0xe2, + PASSTHRU_CMD = 0xe3, + + PASSTHRU_GET_ADAPTER = 0x05, + PASSTHRU_GET_DRVVER = 0x10, + CTLR_POWER_STATE_CHANGE = 0x0e, + CTLR_POWER_SAVING = 0x01, + + PASSTHRU_SIGNATURE = 0x4e415041, + + INQUIRY_EVPD = 0x01, +}; + +struct st_sgitem { + u8 ctrl; /* SG_CF_xxx */ + u8 reserved[3]; + __le32 count; + __le32 addr; + __le32 addr_hi; +}; + +struct st_sgtable { + __le16 sg_count; + __le16 max_sg_count; + __le32 sz_in_byte; + struct st_sgitem table[ST_MAX_SG]; +}; + +struct handshake_frame { + __le32 rb_phy; /* request payload queue physical address */ + __le32 rb_phy_hi; + __le16 req_sz; /* size of each request payload */ + __le16 req_cnt; /* count of reqs the buffer can hold */ + __le16 status_sz; /* size of each status payload */ + __le16 status_cnt; /* count of status the buffer can hold */ + __le32 hosttime; /* seconds from Jan 1, 1970 (GMT) */ + __le32 hosttime_hi; + u8 partner_type; /* who sends this frame */ + u8 reserved0[7]; + __le32 partner_ver_major; + __le32 partner_ver_minor; + __le32 partner_ver_oem; + __le32 partner_ver_build; + u32 reserved1[4]; +}; + +struct req_msg { + __le16 tag; + u8 lun; + u8 target; + u8 task_attr; + u8 task_manage; + u8 prd_entry; + u8 payload_sz; /* payload size in 4-byte */ + u8 cdb[STEX_CDB_LENGTH]; + u8 variable[REQ_VARIABLE_LEN]; +}; + +struct status_msg { + __le16 tag; + u8 lun; + u8 target; + u8 srb_status; + u8 scsi_status; + u8 reserved; + u8 payload_sz; /* payload size in 4-byte */ + u8 variable[STATUS_VAR_LEN]; +}; + +struct ver_info { + u32 major; + u32 minor; + u32 oem; + u32 build; + u32 reserved[2]; +}; + +struct st_frame { + u32 base[6]; + u32 rom_addr; + + struct ver_info drv_ver; + struct ver_info bios_ver; + + u32 bus; + u32 slot; + u32 irq_level; + u32 irq_vec; + u32 id; + u32 subid; + + u32 dimm_size; + u8 dimm_type; + u8 reserved[3]; + + u32 channel; + u32 reserved1; +}; + +struct st_drvver { + u32 major; + u32 minor; + u32 oem; + u32 build; + u32 signature[2]; + u8 console_id; + u8 host_no; + u8 reserved0[2]; + u32 reserved[3]; +}; + +#define MU_REQ_BUFFER_SIZE (MU_REQ_COUNT * sizeof(struct req_msg)) +#define MU_STATUS_BUFFER_SIZE (MU_STATUS_COUNT * sizeof(struct status_msg)) +#define MU_BUFFER_SIZE (MU_REQ_BUFFER_SIZE + MU_STATUS_BUFFER_SIZE) +#define STEX_BUFFER_SIZE (MU_BUFFER_SIZE + sizeof(struct st_frame)) + +struct st_ccb { + struct req_msg *req; + struct scsi_cmnd *cmd; + + void *sense_buffer; + unsigned int sense_bufflen; + int sg_count; + + u32 req_type; + u8 srb_status; + u8 scsi_status; +}; + +struct st_hba { + void __iomem *mmio_base; /* iomapped PCI memory space */ + void *dma_mem; + dma_addr_t dma_handle; + + struct Scsi_Host *host; + struct pci_dev *pdev; + + u32 req_head; + u32 req_tail; + u32 status_head; + u32 status_tail; + + struct status_msg *status_buffer; + void *copy_buffer; /* temp buffer for driver-handled commands */ + struct st_ccb ccb[MU_MAX_REQUEST]; + struct st_ccb *wait_ccb; + wait_queue_head_t waitq; + + unsigned int mu_status; + int out_req_cnt; + + unsigned int cardtype; +}; + +static const char console_inq_page[] = +{ + 0x03,0x00,0x03,0x03,0xFA,0x00,0x00,0x30, + 0x50,0x72,0x6F,0x6D,0x69,0x73,0x65,0x20, /* "Promise " */ + 0x52,0x41,0x49,0x44,0x20,0x43,0x6F,0x6E, /* "RAID Con" */ + 0x73,0x6F,0x6C,0x65,0x20,0x20,0x20,0x20, /* "sole " */ + 0x31,0x2E,0x30,0x30,0x20,0x20,0x20,0x20, /* "1.00 " */ + 0x53,0x58,0x2F,0x52,0x53,0x41,0x46,0x2D, /* "SX/RSAF-" */ + 0x54,0x45,0x31,0x2E,0x30,0x30,0x20,0x20, /* "TE1.00 " */ + 0x0C,0x20,0x20,0x20,0x20,0x20,0x20,0x20 +}; + +MODULE_AUTHOR("Ed Lin"); +MODULE_DESCRIPTION("Promise Technology SuperTrak EX Controllers"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(ST_DRIVER_VERSION); + +static void stex_gettime(__le32 *time) +{ + struct timeval tv; + do_gettimeofday(&tv); + + *time = cpu_to_le32(tv.tv_sec & 0xffffffff); + *(time + 1) = cpu_to_le32((tv.tv_sec >> 16) >> 16); +} + +static struct status_msg *stex_get_status(struct st_hba *hba) +{ + struct status_msg *status = + hba->status_buffer + hba->status_tail; + + ++hba->status_tail; + hba->status_tail %= MU_STATUS_COUNT; + + return status; +} + +static void stex_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq) +{ + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; + + cmd->sense_buffer[0] = 0x70; /* fixed format, current */ + cmd->sense_buffer[2] = sk; + cmd->sense_buffer[7] = 18 - 8; /* additional sense length */ + cmd->sense_buffer[12] = asc; + cmd->sense_buffer[13] = ascq; +} + +static void stex_invalid_field(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *)) +{ + /* "Invalid field in cbd" */ + stex_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0); + done(cmd); +} + +static struct req_msg *stex_alloc_req(struct st_hba *hba) +{ + struct req_msg *req = ((struct req_msg *)hba->dma_mem) + + hba->req_head; + + ++hba->req_head; + hba->req_head %= MU_REQ_COUNT; + + return req; +} + +static int stex_map_sg(struct st_hba *hba, + struct req_msg *req, struct st_ccb *ccb) +{ + struct pci_dev *pdev = hba->pdev; + struct scsi_cmnd *cmd; + dma_addr_t dma_handle; + struct scatterlist *src; + struct st_sgtable *dst; + int i; + + cmd = ccb->cmd; + dst = (struct st_sgtable *)req->variable; + dst->max_sg_count = cpu_to_le16(ST_MAX_SG); + dst->sz_in_byte = cpu_to_le32(cmd->request_bufflen); + + if (cmd->use_sg) { + int n_elem; + + src = (struct scatterlist *) cmd->request_buffer; + n_elem = pci_map_sg(pdev, src, + cmd->use_sg, cmd->sc_data_direction); + if (n_elem <= 0) + return -EIO; + + ccb->sg_count = n_elem; + dst->sg_count = cpu_to_le16((u16)n_elem); + + for (i = 0; i < n_elem; i++, src++) { + dst->table[i].count = cpu_to_le32((u32)sg_dma_len(src)); + dst->table[i].addr = + cpu_to_le32(sg_dma_address(src) & 0xffffffff); + dst->table[i].addr_hi = + cpu_to_le32((sg_dma_address(src) >> 16) >> 16); + dst->table[i].ctrl = SG_CF_64B | SG_CF_HOST; + } + dst->table[--i].ctrl |= SG_CF_EOT; + return 0; + } + + dma_handle = pci_map_single(pdev, cmd->request_buffer, + cmd->request_bufflen, cmd->sc_data_direction); + cmd->SCp.dma_handle = dma_handle; + + ccb->sg_count = 1; + dst->sg_count = cpu_to_le16(1); + dst->table[0].addr = cpu_to_le32(dma_handle & 0xffffffff); + dst->table[0].addr_hi = cpu_to_le32((dma_handle >> 16) >> 16); + dst->table[0].count = cpu_to_le32((u32)cmd->request_bufflen); + dst->table[0].ctrl = SG_CF_EOT | SG_CF_64B | SG_CF_HOST; + + return 0; +} + +static void stex_internal_copy(struct scsi_cmnd *cmd, + const void *src, size_t *count, int sg_count) +{ + size_t lcount; + size_t len; + void *s, *d, *base = NULL; + if (*count > cmd->request_bufflen) + *count = cmd->request_bufflen; + lcount = *count; + while (lcount) { + len = lcount; + s = (void *)src; + if (cmd->use_sg) { + size_t offset = *count - lcount; + s += offset; + base = scsi_kmap_atomic_sg(cmd->request_buffer, + sg_count, &offset, &len); + if (base == NULL) { + *count -= lcount; + return; + } + d = base + offset; + } else + d = cmd->request_buffer; + + memcpy(d, s, len); + + lcount -= len; + if (cmd->use_sg) + scsi_kunmap_atomic_sg(base); + } +} + +static int stex_direct_copy(struct scsi_cmnd *cmd, + const void *src, size_t count) +{ + struct st_hba *hba = (struct st_hba *) &cmd->device->host->hostdata[0]; + size_t cp_len = count; + int n_elem = 0; + + if (cmd->use_sg) { + n_elem = pci_map_sg(hba->pdev, cmd->request_buffer, + cmd->use_sg, cmd->sc_data_direction); + if (n_elem <= 0) + return 0; + } + + stex_internal_copy(cmd, src, &cp_len, n_elem); + + if (cmd->use_sg) + pci_unmap_sg(hba->pdev, cmd->request_buffer, + cmd->use_sg, cmd->sc_data_direction); + return cp_len == count; +} + +static void stex_controller_info(struct st_hba *hba, struct st_ccb *ccb) +{ + struct st_frame *p; + size_t count = sizeof(struct st_frame); + + p = hba->copy_buffer; + memset(p->base, 0, sizeof(u32)*6); + *(unsigned long *)(p->base) = pci_resource_start(hba->pdev, 0); + p->rom_addr = 0; + + p->drv_ver.major = ST_VER_MAJOR; + p->drv_ver.minor = ST_VER_MINOR; + p->drv_ver.oem = ST_OEM; + p->drv_ver.build = ST_BUILD_VER; + + p->bus = hba->pdev->bus->number; + p->slot = hba->pdev->devfn; + p->irq_level = 0; + p->irq_vec = hba->pdev->irq; + p->id = hba->pdev->vendor << 16 | hba->pdev->device; + p->subid = + hba->pdev->subsystem_vendor << 16 | hba->pdev->subsystem_device; + + stex_internal_copy(ccb->cmd, p, &count, ccb->sg_count); +} + +static void +stex_send_cmd(struct st_hba *hba, struct req_msg *req, u16 tag) +{ + req->tag = cpu_to_le16(tag); + req->task_attr = TASK_ATTRIBUTE_SIMPLE; + req->task_manage = 0; /* not supported yet */ + req->payload_sz = (u8)(sizeof(struct req_msg)/sizeof(u32)); + + hba->ccb[tag].req = req; + hba->out_req_cnt++; + + writel(hba->req_head, hba->mmio_base + IMR0); + writel(MU_INBOUND_DOORBELL_REQHEADCHANGED, hba->mmio_base + IDBL); + readl(hba->mmio_base + IDBL); /* flush */ +} + +static int +stex_slave_alloc(struct scsi_device *sdev) +{ + /* Cheat: usually extracted from Inquiry data */ + sdev->tagged_supported = 1; + + scsi_activate_tcq(sdev, sdev->host->can_queue); + + return 0; +} + +static int +stex_slave_config(struct scsi_device *sdev) +{ + sdev->use_10_for_rw = 1; + sdev->use_10_for_ms = 1; + sdev->timeout = 60 * HZ; + sdev->tagged_supported = 1; + + return 0; +} + +static void +stex_slave_destroy(struct scsi_device *sdev) +{ + scsi_deactivate_tcq(sdev, 1); +} + +static int +stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *)) +{ + struct st_hba *hba; + struct Scsi_Host *host; + unsigned int id,lun; + struct req_msg *req; + u16 tag; + host = cmd->device->host; + id = cmd->device->id; + lun = cmd->device->channel; /* firmware lun issue work around */ + hba = (struct st_hba *) &host->hostdata[0]; + + switch (cmd->cmnd[0]) { + case MODE_SENSE_10: + { + static char ms10_caching_page[12] = + { 0, 0x12, 0, 0, 0, 0, 0, 0, 0x8, 0xa, 0x4, 0 }; + unsigned char page; + page = cmd->cmnd[2] & 0x3f; + if (page == 0x8 || page == 0x3f) { + stex_direct_copy(cmd, ms10_caching_page, + sizeof(ms10_caching_page)); + cmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8; + done(cmd); + } else + stex_invalid_field(cmd, done); + return 0; + } + case INQUIRY: + if (id != ST_MAX_ARRAY_SUPPORTED) + break; + if (lun == 0 && (cmd->cmnd[1] & INQUIRY_EVPD) == 0) { + stex_direct_copy(cmd, console_inq_page, + sizeof(console_inq_page)); + cmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8; + done(cmd); + } else + stex_invalid_field(cmd, done); + return 0; + case PASSTHRU_CMD: + if (cmd->cmnd[1] == PASSTHRU_GET_DRVVER) { + struct st_drvver ver; + ver.major = ST_VER_MAJOR; + ver.minor = ST_VER_MINOR; + ver.oem = ST_OEM; + ver.build = ST_BUILD_VER; + ver.signature[0] = PASSTHRU_SIGNATURE; + ver.console_id = ST_MAX_ARRAY_SUPPORTED; + ver.host_no = hba->host->host_no; + cmd->result = stex_direct_copy(cmd, &ver, sizeof(ver)) ? + DID_OK << 16 | COMMAND_COMPLETE << 8 : + DID_ERROR << 16 | COMMAND_COMPLETE << 8; + done(cmd); + return 0; + } + default: + break; + } + + cmd->scsi_done = done; + + tag = cmd->request->tag; + + if (unlikely(tag >= host->can_queue)) + return SCSI_MLQUEUE_HOST_BUSY; + + req = stex_alloc_req(hba); + req->lun = lun; + req->target = id; + + /* cdb */ + memcpy(req->cdb, cmd->cmnd, STEX_CDB_LENGTH); + + hba->ccb[tag].cmd = cmd; + hba->ccb[tag].sense_bufflen = SCSI_SENSE_BUFFERSIZE; + hba->ccb[tag].sense_buffer = cmd->sense_buffer; + hba->ccb[tag].req_type = 0; + + if (cmd->sc_data_direction != DMA_NONE) + stex_map_sg(hba, req, &hba->ccb[tag]); + + stex_send_cmd(hba, req, tag); + return 0; +} + +static void stex_unmap_sg(struct st_hba *hba, struct scsi_cmnd *cmd) +{ + if (cmd->sc_data_direction != DMA_NONE) { + if (cmd->use_sg) + pci_unmap_sg(hba->pdev, cmd->request_buffer, + cmd->use_sg, cmd->sc_data_direction); + else + pci_unmap_single(hba->pdev, cmd->SCp.dma_handle, + cmd->request_bufflen, cmd->sc_data_direction); + } +} + +static void stex_scsi_done(struct st_ccb *ccb) +{ + struct scsi_cmnd *cmd = ccb->cmd; + int result; + + if (ccb->srb_status == SRB_STATUS_SUCCESS || ccb->srb_status == 0) { + result = ccb->scsi_status; + switch (ccb->scsi_status) { + case SAM_STAT_GOOD: + result |= DID_OK << 16 | COMMAND_COMPLETE << 8; + break; + case SAM_STAT_CHECK_CONDITION: + result |= DRIVER_SENSE << 24; + break; + case SAM_STAT_BUSY: + result |= DID_BUS_BUSY << 16 | COMMAND_COMPLETE << 8; + break; + default: + result |= DID_ERROR << 16 | COMMAND_COMPLETE << 8; + break; + } + } + else if (ccb->srb_status & SRB_SEE_SENSE) + result = DRIVER_SENSE << 24 | SAM_STAT_CHECK_CONDITION; + else switch (ccb->srb_status) { + case SRB_STATUS_SELECTION_TIMEOUT: + result = DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8; + break; + case SRB_STATUS_BUSY: + result = DID_BUS_BUSY << 16 | COMMAND_COMPLETE << 8; + break; + case SRB_STATUS_INVALID_REQUEST: + case SRB_STATUS_ERROR: + default: + result = DID_ERROR << 16 | COMMAND_COMPLETE << 8; + break; + } + + cmd->result = result; + cmd->scsi_done(cmd); +} + +static void stex_copy_data(struct st_ccb *ccb, + struct status_msg *resp, unsigned int variable) +{ + size_t count = variable; + if (resp->scsi_status != SAM_STAT_GOOD) { + if (ccb->sense_buffer != NULL) + memcpy(ccb->sense_buffer, resp->variable, + min(variable, ccb->sense_bufflen)); + return; + } + + if (ccb->cmd == NULL) + return; + stex_internal_copy(ccb->cmd, resp->variable, &count, ccb->sg_count); +} + +static void stex_mu_intr(struct st_hba *hba, u32 doorbell) +{ + void __iomem *base = hba->mmio_base; + struct status_msg *resp; + struct st_ccb *ccb; + unsigned int size; + u16 tag; + + if (!(doorbell & MU_OUTBOUND_DOORBELL_STATUSHEADCHANGED)) + return; + + /* status payloads */ + hba->status_head = readl(base + OMR1); + if (unlikely(hba->status_head >= MU_STATUS_COUNT)) { + printk(KERN_WARNING DRV_NAME "(%s): invalid status head\n", + pci_name(hba->pdev)); + return; + } + + if (unlikely(hba->mu_status != MU_STATE_STARTED || + hba->out_req_cnt <= 0)) { + hba->status_tail = hba->status_head; + goto update_status; + } + + while (hba->status_tail != hba->status_head) { + resp = stex_get_status(hba); + tag = le16_to_cpu(resp->tag); + if (unlikely(tag >= hba->host->can_queue)) { + printk(KERN_WARNING DRV_NAME + "(%s): invalid tag\n", pci_name(hba->pdev)); + continue; + } + + ccb = &hba->ccb[tag]; + if (hba->wait_ccb == ccb) + hba->wait_ccb = NULL; + if (unlikely(ccb->req == NULL)) { + printk(KERN_WARNING DRV_NAME + "(%s): lagging req\n", pci_name(hba->pdev)); + continue; + } + + size = resp->payload_sz * sizeof(u32); /* payload size */ + if (unlikely(size < sizeof(*resp) - STATUS_VAR_LEN || + size > sizeof(*resp))) { + printk(KERN_WARNING DRV_NAME "(%s): bad status size\n", + pci_name(hba->pdev)); + } else { + size -= sizeof(*resp) - STATUS_VAR_LEN; /* copy size */ + if (size) + stex_copy_data(ccb, resp, size); + } + + ccb->srb_status = resp->srb_status; + ccb->scsi_status = resp->scsi_status; + + if (likely(ccb->cmd != NULL)) { + if (unlikely(ccb->cmd->cmnd[0] == PASSTHRU_CMD && + ccb->cmd->cmnd[1] == PASSTHRU_GET_ADAPTER)) + stex_controller_info(hba, ccb); + stex_unmap_sg(hba, ccb->cmd); + stex_scsi_done(ccb); + hba->out_req_cnt--; + } else if (ccb->req_type & PASSTHRU_REQ_TYPE) { + hba->out_req_cnt--; + if (ccb->req_type & PASSTHRU_REQ_NO_WAKEUP) { + ccb->req_type = 0; + continue; + } + ccb->req_type = 0; + if (waitqueue_active(&hba->waitq)) + wake_up(&hba->waitq); + } + } + +update_status: + writel(hba->status_head, base + IMR1); + readl(base + IMR1); /* flush */ +} + +static irqreturn_t stex_intr(int irq, void *__hba, struct pt_regs *regs) +{ + struct st_hba *hba = __hba; + void __iomem *base = hba->mmio_base; + u32 data; + unsigned long flags; + int handled = 0; + + spin_lock_irqsave(hba->host->host_lock, flags); + + data = readl(base + ODBL); + + if (data && data != 0xffffffff) { + /* clear the interrupt */ + writel(data, base + ODBL); + readl(base + ODBL); /* flush */ + stex_mu_intr(hba, data); + handled = 1; + } + + spin_unlock_irqrestore(hba->host->host_lock, flags); + + return IRQ_RETVAL(handled); +} + +static int stex_handshake(struct st_hba *hba) +{ + void __iomem *base = hba->mmio_base; + struct handshake_frame *h; + dma_addr_t status_phys; + int i; + + if (readl(base + OMR0) != MU_HANDSHAKE_SIGNATURE) { + writel(MU_INBOUND_DOORBELL_HANDSHAKE, base + IDBL); + readl(base + IDBL); + for (i = 0; readl(base + OMR0) != MU_HANDSHAKE_SIGNATURE + && i < MU_MAX_DELAY_TIME; i++) { + rmb(); + msleep(1); + } + + if (i == MU_MAX_DELAY_TIME) { + printk(KERN_ERR DRV_NAME + "(%s): no handshake signature\n", + pci_name(hba->pdev)); + return -1; + } + } + + udelay(10); + + h = (struct handshake_frame *)(hba->dma_mem + MU_REQ_BUFFER_SIZE); + h->rb_phy = cpu_to_le32(hba->dma_handle); + h->rb_phy_hi = cpu_to_le32((hba->dma_handle >> 16) >> 16); + h->req_sz = cpu_to_le16(sizeof(struct req_msg)); + h->req_cnt = cpu_to_le16(MU_REQ_COUNT); + h->status_sz = cpu_to_le16(sizeof(struct status_msg)); + h->status_cnt = cpu_to_le16(MU_STATUS_COUNT); + stex_gettime(&h->hosttime); + h->partner_type = HMU_PARTNER_TYPE; + + status_phys = hba->dma_handle + MU_REQ_BUFFER_SIZE; + writel(status_phys, base + IMR0); + readl(base + IMR0); + writel((status_phys >> 16) >> 16, base + IMR1); + readl(base + IMR1); + + writel((status_phys >> 16) >> 16, base + OMR0); /* old fw compatible */ + readl(base + OMR0); + writel(MU_INBOUND_DOORBELL_HANDSHAKE, base + IDBL); + readl(base + IDBL); /* flush */ + + udelay(10); + for (i = 0; readl(base + OMR0) != MU_HANDSHAKE_SIGNATURE + && i < MU_MAX_DELAY_TIME; i++) { + rmb(); + msleep(1); + } + + if (i == MU_MAX_DELAY_TIME) { + printk(KERN_ERR DRV_NAME + "(%s): no signature after handshake frame\n", + pci_name(hba->pdev)); + return -1; + } + + writel(0, base + IMR0); + readl(base + IMR0); + writel(0, base + OMR0); + readl(base + OMR0); + writel(0, base + IMR1); + readl(base + IMR1); + writel(0, base + OMR1); + readl(base + OMR1); /* flush */ + hba->mu_status = MU_STATE_STARTED; + return 0; +} + +static int stex_abort(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *host = cmd->device->host; + struct st_hba *hba = (struct st_hba *)host->hostdata; + u16 tag = cmd->request->tag; + void __iomem *base; + u32 data; + int result = SUCCESS; + unsigned long flags; + base = hba->mmio_base; + spin_lock_irqsave(host->host_lock, flags); + if (tag < host->can_queue && hba->ccb[tag].cmd == cmd) + hba->wait_ccb = &hba->ccb[tag]; + else { + for (tag = 0; tag < host->can_queue; tag++) + if (hba->ccb[tag].cmd == cmd) { + hba->wait_ccb = &hba->ccb[tag]; + break; + } + if (tag >= host->can_queue) + goto out; + } + + data = readl(base + ODBL); + if (data == 0 || data == 0xffffffff) + goto fail_out; + + writel(data, base + ODBL); + readl(base + ODBL); /* flush */ + + stex_mu_intr(hba, data); + + if (hba->wait_ccb == NULL) { + printk(KERN_WARNING DRV_NAME + "(%s): lost interrupt\n", pci_name(hba->pdev)); + goto out; + } + +fail_out: + stex_unmap_sg(hba, cmd); + hba->wait_ccb->req = NULL; /* nullify the req's future return */ + hba->wait_ccb = NULL; + result = FAILED; +out: + spin_unlock_irqrestore(host->host_lock, flags); + return result; +} + +static void stex_hard_reset(struct st_hba *hba) +{ + struct pci_bus *bus; + int i; + u16 pci_cmd; + u8 pci_bctl; + + for (i = 0; i < 16; i++) + pci_read_config_dword(hba->pdev, i * 4, + &hba->pdev->saved_config_space[i]); + + /* Reset secondary bus. Our controller(MU/ATU) is the only device on + secondary bus. Consult Intel 80331/3 developer's manual for detail */ + bus = hba->pdev->bus; + pci_read_config_byte(bus->self, PCI_BRIDGE_CONTROL, &pci_bctl); + pci_bctl |= PCI_BRIDGE_CTL_BUS_RESET; + pci_write_config_byte(bus->self, PCI_BRIDGE_CONTROL, pci_bctl); + msleep(1); + pci_bctl &= ~PCI_BRIDGE_CTL_BUS_RESET; + pci_write_config_byte(bus->self, PCI_BRIDGE_CONTROL, pci_bctl); + + for (i = 0; i < MU_MAX_DELAY_TIME; i++) { + pci_read_config_word(hba->pdev, PCI_COMMAND, &pci_cmd); + if (pci_cmd & PCI_COMMAND_MASTER) + break; + msleep(1); + } + + ssleep(5); + for (i = 0; i < 16; i++) + pci_write_config_dword(hba->pdev, i * 4, + hba->pdev->saved_config_space[i]); +} + +static int stex_reset(struct scsi_cmnd *cmd) +{ + struct st_hba *hba; + unsigned long flags; + hba = (struct st_hba *) &cmd->device->host->hostdata[0]; + + hba->mu_status = MU_STATE_RESETTING; + + if (hba->cardtype == st_shasta) + stex_hard_reset(hba); + + if (stex_handshake(hba)) { + printk(KERN_WARNING DRV_NAME + "(%s): resetting: handshake failed\n", + pci_name(hba->pdev)); + return FAILED; + } + spin_lock_irqsave(hba->host->host_lock, flags); + hba->req_head = 0; + hba->req_tail = 0; + hba->status_head = 0; + hba->status_tail = 0; + hba->out_req_cnt = 0; + spin_unlock_irqrestore(hba->host->host_lock, flags); + + return SUCCESS; +} + +static int stex_biosparam(struct scsi_device *sdev, + struct block_device *bdev, sector_t capacity, int geom[]) +{ + int heads = 255, sectors = 63, cylinders; + + if (capacity < 0x200000) { + heads = 64; + sectors = 32; + } + + cylinders = sector_div(capacity, heads * sectors); + + geom[0] = heads; + geom[1] = sectors; + geom[2] = cylinders; + + return 0; +} + +static struct scsi_host_template driver_template = { + .module = THIS_MODULE, + .name = DRV_NAME, + .proc_name = DRV_NAME, + .bios_param = stex_biosparam, + .queuecommand = stex_queuecommand, + .slave_alloc = stex_slave_alloc, + .slave_configure = stex_slave_config, + .slave_destroy = stex_slave_destroy, + .eh_abort_handler = stex_abort, + .eh_host_reset_handler = stex_reset, + .can_queue = ST_CAN_QUEUE, + .this_id = -1, + .sg_tablesize = ST_MAX_SG, + .cmd_per_lun = ST_CMD_PER_LUN, +}; + +static int stex_set_dma_mask(struct pci_dev * pdev) +{ + int ret; + if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK) + && !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) + return 0; + ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (!ret) + ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + return ret; +} + +static int __devinit +stex_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct st_hba *hba; + struct Scsi_Host *host; + int err; + + err = pci_enable_device(pdev); + if (err) + return err; + + pci_set_master(pdev); + + host = scsi_host_alloc(&driver_template, sizeof(struct st_hba)); + + if (!host) { + printk(KERN_ERR DRV_NAME "(%s): scsi_host_alloc failed\n", + pci_name(pdev)); + err = -ENOMEM; + goto out_disable; + } + + hba = (struct st_hba *)host->hostdata; + memset(hba, 0, sizeof(struct st_hba)); + + err = pci_request_regions(pdev, DRV_NAME); + if (err < 0) { + printk(KERN_ERR DRV_NAME "(%s): request regions failed\n", + pci_name(pdev)); + goto out_scsi_host_put; + } + + hba->mmio_base = ioremap(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if ( !hba->mmio_base) { + printk(KERN_ERR DRV_NAME "(%s): memory map failed\n", + pci_name(pdev)); + err = -ENOMEM; + goto out_release_regions; + } + + err = stex_set_dma_mask(pdev); + if (err) { + printk(KERN_ERR DRV_NAME "(%s): set dma mask failed\n", + pci_name(pdev)); + goto out_iounmap; + } + + hba->dma_mem = dma_alloc_coherent(&pdev->dev, + STEX_BUFFER_SIZE, &hba->dma_handle, GFP_KERNEL); + if (!hba->dma_mem) { + err = -ENOMEM; + printk(KERN_ERR DRV_NAME "(%s): dma mem alloc failed\n", + pci_name(pdev)); + goto out_iounmap; + } + + hba->status_buffer = + (struct status_msg *)(hba->dma_mem + MU_REQ_BUFFER_SIZE); + hba->copy_buffer = hba->dma_mem + MU_BUFFER_SIZE; + hba->mu_status = MU_STATE_STARTING; + + hba->cardtype = (unsigned int) id->driver_data; + + /* firmware uses id/lun pair for a logical drive, but lun would be + always 0 if CONFIG_SCSI_MULTI_LUN not configured, so we use + channel to map lun here */ + host->max_channel = ST_MAX_LUN_PER_TARGET - 1; + host->max_id = ST_MAX_TARGET_NUM; + host->max_lun = 1; + host->unique_id = host->host_no; + host->max_cmd_len = STEX_CDB_LENGTH; + + hba->host = host; + hba->pdev = pdev; + init_waitqueue_head(&hba->waitq); + + err = request_irq(pdev->irq, stex_intr, IRQF_SHARED, DRV_NAME, hba); + if (err) { + printk(KERN_ERR DRV_NAME "(%s): request irq failed\n", + pci_name(pdev)); + goto out_pci_free; + } + + err = stex_handshake(hba); + if (err) + goto out_free_irq; + + err = scsi_init_shared_tag_map(host, ST_CAN_QUEUE); + if (err) { + printk(KERN_ERR DRV_NAME "(%s): init shared queue failed\n", + pci_name(pdev)); + goto out_free_irq; + } + + pci_set_drvdata(pdev, hba); + + err = scsi_add_host(host, &pdev->dev); + if (err) { + printk(KERN_ERR DRV_NAME "(%s): scsi_add_host failed\n", + pci_name(pdev)); + goto out_free_irq; + } + + scsi_scan_host(host); + + return 0; + +out_free_irq: + free_irq(pdev->irq, hba); +out_pci_free: + dma_free_coherent(&pdev->dev, STEX_BUFFER_SIZE, + hba->dma_mem, hba->dma_handle); +out_iounmap: + iounmap(hba->mmio_base); +out_release_regions: + pci_release_regions(pdev); +out_scsi_host_put: + scsi_host_put(host); +out_disable: + pci_disable_device(pdev); + + return err; +} + +static void stex_hba_stop(struct st_hba *hba) +{ + struct req_msg *req; + unsigned long flags; + unsigned long before; + u16 tag = 0; + + spin_lock_irqsave(hba->host->host_lock, flags); + req = stex_alloc_req(hba); + memset(req->cdb, 0, STEX_CDB_LENGTH); + + req->cdb[0] = CONTROLLER_CMD; + req->cdb[1] = CTLR_POWER_STATE_CHANGE; + req->cdb[2] = CTLR_POWER_SAVING; + + hba->ccb[tag].cmd = NULL; + hba->ccb[tag].sg_count = 0; + hba->ccb[tag].sense_bufflen = 0; + hba->ccb[tag].sense_buffer = NULL; + hba->ccb[tag].req_type |= PASSTHRU_REQ_TYPE; + + stex_send_cmd(hba, req, tag); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + before = jiffies; + while (hba->ccb[tag].req_type & PASSTHRU_REQ_TYPE) { + if (time_after(jiffies, before + ST_INTERNAL_TIMEOUT * HZ)) + return; + msleep(10); + } +} + +static void stex_hba_free(struct st_hba *hba) +{ + free_irq(hba->pdev->irq, hba); + + iounmap(hba->mmio_base); + + pci_release_regions(hba->pdev); + + dma_free_coherent(&hba->pdev->dev, STEX_BUFFER_SIZE, + hba->dma_mem, hba->dma_handle); +} + +static void stex_remove(struct pci_dev *pdev) +{ + struct st_hba *hba = pci_get_drvdata(pdev); + + scsi_remove_host(hba->host); + + pci_set_drvdata(pdev, NULL); + + stex_hba_stop(hba); + + stex_hba_free(hba); + + scsi_host_put(hba->host); + + pci_disable_device(pdev); +} + +static void stex_shutdown(struct pci_dev *pdev) +{ + struct st_hba *hba = pci_get_drvdata(pdev); + + stex_hba_stop(hba); +} + +static struct pci_device_id stex_pci_tbl[] = { + { 0x105a, 0x8350, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta }, + { 0x105a, 0xc350, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta }, + { 0x105a, 0xf350, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta }, + { 0x105a, 0x4301, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta }, + { 0x105a, 0x4302, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta }, + { 0x105a, 0x8301, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta }, + { 0x105a, 0x8302, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta }, + { 0x1725, 0x7250, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_vsc }, + { } /* terminate list */ +}; +MODULE_DEVICE_TABLE(pci, stex_pci_tbl); + +static struct pci_driver stex_pci_driver = { + .name = DRV_NAME, + .id_table = stex_pci_tbl, + .probe = stex_probe, + .remove = __devexit_p(stex_remove), + .shutdown = stex_shutdown, +}; + +static int __init stex_init(void) +{ + printk(KERN_INFO DRV_NAME + ": Promise SuperTrak EX Driver version: %s\n", + ST_DRIVER_VERSION); + + return pci_register_driver(&stex_pci_driver); +} + +static void __exit stex_exit(void) +{ + pci_unregister_driver(&stex_pci_driver); +} + +module_init(stex_init); +module_exit(stex_exit); diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c index 25cced91c8a..2f8073b73bf 100644 --- a/drivers/scsi/sun3_NCR5380.c +++ b/drivers/scsi/sun3_NCR5380.c @@ -517,7 +517,7 @@ static __inline__ void initialize_SCp(Scsi_Cmnd *cmd) */ if (cmd->use_sg) { - cmd->SCp.buffer = (struct scatterlist *) cmd->buffer; + cmd->SCp.buffer = (struct scatterlist *) cmd->request_buffer; cmd->SCp.buffers_residual = cmd->use_sg - 1; cmd->SCp.ptr = (char *) SGADDR(cmd->SCp.buffer); cmd->SCp.this_residual = cmd->SCp.buffer->length; @@ -535,7 +535,6 @@ static __inline__ void initialize_SCp(Scsi_Cmnd *cmd) } -#include <linux/config.h> #include <linux/delay.h> #if 1 diff --git a/drivers/scsi/sun3x_esp.c b/drivers/scsi/sun3x_esp.c index cc990bed968..6b60536ac92 100644 --- a/drivers/scsi/sun3x_esp.c +++ b/drivers/scsi/sun3x_esp.c @@ -97,7 +97,7 @@ int sun3x_esp_detect(struct scsi_host_template *tpnt) esp->esp_command_dvma = dvma_vtob((unsigned long)esp->esp_command); esp->irq = 2; - if (request_irq(esp->irq, esp_intr, SA_INTERRUPT, + if (request_irq(esp->irq, esp_intr, IRQF_DISABLED, "SUN3X SCSI", esp->ehost)) { esp_deallocate(esp); return 0; @@ -332,11 +332,11 @@ static void dma_mmu_get_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp) struct scatterlist *sg = sp->SCp.buffer; while (sz >= 0) { - sg[sz].dvma_address = dvma_map((unsigned long)page_address(sg[sz].page) + + sg[sz].dma_address = dvma_map((unsigned long)page_address(sg[sz].page) + sg[sz].offset, sg[sz].length); sz--; } - sp->SCp.ptr=(char *)((unsigned long)sp->SCp.buffer->dvma_address); + sp->SCp.ptr=(char *)((unsigned long)sp->SCp.buffer->dma_address); } static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp) @@ -347,17 +347,17 @@ static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp) static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp) { int sz = sp->use_sg - 1; - struct scatterlist *sg = (struct scatterlist *)sp->buffer; + struct scatterlist *sg = (struct scatterlist *)sp->request_buffer; while(sz >= 0) { - dvma_unmap((char *)sg[sz].dvma_address); + dvma_unmap((char *)sg[sz].dma_address); sz--; } } static void dma_advance_sg (Scsi_Cmnd *sp) { - sp->SCp.ptr = (char *)((unsigned long)sp->SCp.buffer->dvma_address); + sp->SCp.ptr = (char *)((unsigned long)sp->SCp.buffer->dma_address); } static int sun3x_esp_release(struct Scsi_Host *instance) diff --git a/drivers/scsi/sym53c8xx_2/sym53c8xx.h b/drivers/scsi/sym53c8xx_2/sym53c8xx.h index 48110376972..7519728dfc3 100644 --- a/drivers/scsi/sym53c8xx_2/sym53c8xx.h +++ b/drivers/scsi/sym53c8xx_2/sym53c8xx.h @@ -40,7 +40,6 @@ #ifndef SYM53C8XX_H #define SYM53C8XX_H -#include <linux/config.h> /* * DMA addressing mode. diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index ea82d3df63a..739d3ef46a4 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -1547,7 +1547,7 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, * If we synchonize the C code with SCRIPTS on interrupt, * we do not want to share the INTR line at all. */ - if (request_irq(pdev->irq, sym53c8xx_intr, SA_SHIRQ, NAME53C8XX, np)) { + if (request_irq(pdev->irq, sym53c8xx_intr, IRQF_SHARED, NAME53C8XX, np)) { printf_err("%s: request irq %d failure\n", sym_name(np), pdev->irq); goto attach_failed; @@ -2084,7 +2084,7 @@ static struct pci_device_id sym2_id_table[] __devinitdata = { { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C860, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1510, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, + PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SCSI<<8, 0xffff00, 0UL }, { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C896, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C895, diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.h b/drivers/scsi/sym53c8xx_2/sym_glue.h index a446cda3f64..e022d3c71b5 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.h +++ b/drivers/scsi/sym53c8xx_2/sym_glue.h @@ -40,7 +40,6 @@ #ifndef SYM_GLUE_H #define SYM_GLUE_H -#include <linux/config.h> #include <linux/delay.h> #include <linux/ioport.h> #include <linux/pci.h> diff --git a/drivers/scsi/t128.c b/drivers/scsi/t128.c index a24f661b027..2df6747cb76 100644 --- a/drivers/scsi/t128.c +++ b/drivers/scsi/t128.c @@ -260,7 +260,7 @@ found: instance->irq = NCR5380_probe_irq(instance, T128_IRQS); if (instance->irq != SCSI_IRQ_NONE) - if (request_irq(instance->irq, t128_intr, SA_INTERRUPT, "t128", instance)) { + if (request_irq(instance->irq, t128_intr, IRQF_DISABLED, "t128", instance)) { printk("scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq); instance->irq = SCSI_IRQ_NONE; diff --git a/drivers/scsi/tmscsim.c b/drivers/scsi/tmscsim.c index 91322aff241..9404ff3d4c7 100644 --- a/drivers/scsi/tmscsim.c +++ b/drivers/scsi/tmscsim.c @@ -218,7 +218,6 @@ #endif #define DCBDEBUG1(x) C_NOP -#include <linux/config.h> #include <linux/module.h> #include <linux/delay.h> #include <linux/signal.h> @@ -2585,7 +2584,7 @@ static int __devinit dc390_probe_one(struct pci_dev *pdev, /* Reset Pending INT */ DC390_read8_(INT_Status, io_port); - if (request_irq(pdev->irq, do_DC390_Interrupt, SA_SHIRQ, + if (request_irq(pdev->irq, do_DC390_Interrupt, IRQF_SHARED, "tmscsim", pACB)) { printk(KERN_ERR "DC390: register IRQ error!\n"); goto out_release_region; diff --git a/drivers/scsi/tmscsim.h b/drivers/scsi/tmscsim.h index d4495272fb4..9b66fa8d38d 100644 --- a/drivers/scsi/tmscsim.h +++ b/drivers/scsi/tmscsim.h @@ -9,7 +9,6 @@ #define _TMSCSIM_H #include <linux/types.h> -#include <linux/config.h> #define SCSI_IRQ_NONE 255 diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c index 33cd90fc657..57449611e71 100644 --- a/drivers/scsi/u14-34f.c +++ b/drivers/scsi/u14-34f.c @@ -405,7 +405,6 @@ * the driver sets host->wish_block = TRUE for all ISA boards. */ -#include <linux/config.h> #include <linux/string.h> #include <linux/kernel.h> #include <linux/ioport.h> @@ -873,7 +872,7 @@ static int port_detect \ /* Board detected, allocate its IRQ */ if (request_irq(irq, do_interrupt_handler, - SA_INTERRUPT | ((subversion == ESA) ? SA_SHIRQ : 0), + IRQF_DISABLED | ((subversion == ESA) ? IRQF_SHARED : 0), driver_name, (void *) &sha[j])) { printk("%s: unable to allocate IRQ %u, detaching.\n", name, irq); goto freelock; diff --git a/drivers/scsi/ultrastor.c b/drivers/scsi/ultrastor.c index e681681ab7a..0372aa9fa19 100644 --- a/drivers/scsi/ultrastor.c +++ b/drivers/scsi/ultrastor.c @@ -196,8 +196,8 @@ struct mscp { u32 sense_data PACKED; /* The following fields are for software only. They are included in the MSCP structure because they are associated with SCSI requests. */ - void (*done)(Scsi_Cmnd *); - Scsi_Cmnd *SCint; + void (*done) (struct scsi_cmnd *); + struct scsi_cmnd *SCint; ultrastor_sg_list sglist[ULTRASTOR_24F_MAX_SG]; /* use larger size for 24F */ }; @@ -289,7 +289,7 @@ static const unsigned short ultrastor_ports_14f[] = { static void ultrastor_interrupt(int, void *, struct pt_regs *); static irqreturn_t do_ultrastor_interrupt(int, void *, struct pt_regs *); -static inline void build_sg_list(struct mscp *, Scsi_Cmnd *SCpnt); +static inline void build_sg_list(struct mscp *, struct scsi_cmnd *SCpnt); /* Always called with host lock held */ @@ -673,7 +673,7 @@ static const char *ultrastor_info(struct Scsi_Host * shpnt) return buf; } -static inline void build_sg_list(struct mscp *mscp, Scsi_Cmnd *SCpnt) +static inline void build_sg_list(struct mscp *mscp, struct scsi_cmnd *SCpnt) { struct scatterlist *sl; long transfer_length = 0; @@ -694,7 +694,8 @@ static inline void build_sg_list(struct mscp *mscp, Scsi_Cmnd *SCpnt) mscp->transfer_data_length = transfer_length; } -static int ultrastor_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *)) +static int ultrastor_queuecommand(struct scsi_cmnd *SCpnt, + void (*done) (struct scsi_cmnd *)) { struct mscp *my_mscp; #if ULTRASTOR_MAX_CMDS > 1 @@ -833,7 +834,7 @@ retry: */ -static int ultrastor_abort(Scsi_Cmnd *SCpnt) +static int ultrastor_abort(struct scsi_cmnd *SCpnt) { #if ULTRASTOR_DEBUG & UD_ABORT char out[108]; @@ -843,7 +844,7 @@ static int ultrastor_abort(Scsi_Cmnd *SCpnt) unsigned int mscp_index; unsigned char old_aborted; unsigned long flags; - void (*done)(Scsi_Cmnd *); + void (*done)(struct scsi_cmnd *); struct Scsi_Host *host = SCpnt->device->host; if(config.slot) @@ -960,7 +961,7 @@ static int ultrastor_abort(Scsi_Cmnd *SCpnt) return SUCCESS; } -static int ultrastor_host_reset(Scsi_Cmnd * SCpnt) +static int ultrastor_host_reset(struct scsi_cmnd * SCpnt) { unsigned long flags; int i; @@ -1045,8 +1046,8 @@ static void ultrastor_interrupt(int irq, void *dev_id, struct pt_regs *regs) unsigned int mscp_index; #endif struct mscp *mscp; - void (*done)(Scsi_Cmnd *); - Scsi_Cmnd *SCtmp; + void (*done) (struct scsi_cmnd *); + struct scsi_cmnd *SCtmp; #if ULTRASTOR_MAX_CMDS == 1 mscp = &config.mscp[0]; @@ -1079,7 +1080,7 @@ static void ultrastor_interrupt(int irq, void *dev_id, struct pt_regs *regs) return; } if (icm_status == 3) { - void (*done)(Scsi_Cmnd *) = mscp->done; + void (*done)(struct scsi_cmnd *) = mscp->done; if (done) { mscp->done = NULL; mscp->SCint->result = DID_ABORT << 16; diff --git a/drivers/scsi/ultrastor.h b/drivers/scsi/ultrastor.h index da759a11def..a692905f95f 100644 --- a/drivers/scsi/ultrastor.h +++ b/drivers/scsi/ultrastor.h @@ -14,11 +14,13 @@ #define _ULTRASTOR_H static int ultrastor_detect(struct scsi_host_template *); -static const char *ultrastor_info(struct Scsi_Host * shpnt); -static int ultrastor_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *)); -static int ultrastor_abort(Scsi_Cmnd *); -static int ultrastor_host_reset(Scsi_Cmnd *); -static int ultrastor_biosparam(struct scsi_device *, struct block_device *, sector_t, int *); +static const char *ultrastor_info(struct Scsi_Host *shpnt); +static int ultrastor_queuecommand(struct scsi_cmnd *, + void (*done)(struct scsi_cmnd *)); +static int ultrastor_abort(struct scsi_cmnd *); +static int ultrastor_host_reset(struct scsi_cmnd *); +static int ultrastor_biosparam(struct scsi_device *, struct block_device *, + sector_t, int *); #define ULTRASTOR_14F_MAX_SG 16 diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c index 27307fe5a4c..2083454db51 100644 --- a/drivers/scsi/wd33c93.c +++ b/drivers/scsi/wd33c93.c @@ -71,7 +71,6 @@ * Richard Hirst <richard@sleepie.demon.co.uk> August 2000 */ -#include <linux/config.h> #include <linux/module.h> #include <linux/sched.h> @@ -374,7 +373,7 @@ wd33c93_queuecommand(struct scsi_cmnd *cmd, */ if (cmd->use_sg) { - cmd->SCp.buffer = (struct scatterlist *) cmd->buffer; + cmd->SCp.buffer = (struct scatterlist *) cmd->request_buffer; cmd->SCp.buffers_residual = cmd->use_sg - 1; cmd->SCp.ptr = page_address(cmd->SCp.buffer->page) + cmd->SCp.buffer->offset; diff --git a/drivers/scsi/wd33c93.h b/drivers/scsi/wd33c93.h index 193ec517d25..edcb0365cf0 100644 --- a/drivers/scsi/wd33c93.h +++ b/drivers/scsi/wd33c93.h @@ -22,7 +22,6 @@ #ifndef WD33C93_H #define WD33C93_H -#include <linux/config.h> #define PROC_INTERFACE /* add code for /proc/scsi/wd33c93/xxx interface */ #ifdef PROC_INTERFACE diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c index e55f0ee7e7e..a0b61af48f1 100644 --- a/drivers/scsi/wd7000.c +++ b/drivers/scsi/wd7000.c @@ -1250,7 +1250,7 @@ static int wd7000_init(Adapter * host) return 0; - if (request_irq(host->irq, wd7000_intr, SA_INTERRUPT, "wd7000", host)) { + if (request_irq(host->irq, wd7000_intr, IRQF_DISABLED, "wd7000", host)) { printk("wd7000_init: can't get IRQ %d.\n", host->irq); return (0); } @@ -1391,7 +1391,7 @@ static int wd7000_proc_info(struct Scsi_Host *host, char *buffer, char **start, * */ -static int wd7000_detect(struct scsi_host_template *tpnt) +static __init int wd7000_detect(struct scsi_host_template *tpnt) { short present = 0, biosaddr_ptr, sig_ptr, i, pass; short biosptr[NUM_CONFIGS]; diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c index a6cfbb3b361..4b5f908d35c 100644 --- a/drivers/scsi/zalon.c +++ b/drivers/scsi/zalon.c @@ -136,7 +136,7 @@ zalon_probe(struct parisc_device *dev) if (!host) goto fail; - if (request_irq(dev->irq, ncr53c8xx_intr, SA_SHIRQ, "zalon", host)) { + if (request_irq(dev->irq, ncr53c8xx_intr, IRQF_SHARED, "zalon", host)) { printk(KERN_ERR "%s: irq problem with %d, detaching\n ", dev->dev.bus_id, dev->irq); goto fail; |