summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/isci/host.c47
-rw-r--r--drivers/scsi/isci/init.c3
-rw-r--r--drivers/scsi/isci/phy.c51
-rw-r--r--drivers/scsi/isci/probe_roms.h53
4 files changed, 148 insertions, 6 deletions
diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index 383bb691308..ed1441c8957 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -1759,7 +1759,7 @@ static enum sci_status sci_controller_construct(struct isci_host *ihost,
return sci_controller_reset(ihost);
}
-int sci_oem_parameters_validate(struct sci_oem_params *oem)
+int sci_oem_parameters_validate(struct sci_oem_params *oem, u8 version)
{
int i;
@@ -1791,18 +1791,61 @@ int sci_oem_parameters_validate(struct sci_oem_params *oem)
oem->controller.max_concurr_spin_up < 1)
return -EINVAL;
+ if (oem->controller.do_enable_ssc) {
+ if (version < ISCI_ROM_VER_1_1 && oem->controller.do_enable_ssc != 1)
+ return -EINVAL;
+
+ if (version >= ISCI_ROM_VER_1_1) {
+ u8 test = oem->controller.ssc_sata_tx_spread_level;
+
+ switch (test) {
+ case 0:
+ case 2:
+ case 3:
+ case 6:
+ case 7:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ test = oem->controller.ssc_sas_tx_spread_level;
+ if (oem->controller.ssc_sas_tx_type == 0) {
+ switch (test) {
+ case 0:
+ case 2:
+ case 3:
+ break;
+ default:
+ return -EINVAL;
+ }
+ } else if (oem->controller.ssc_sas_tx_type == 1) {
+ switch (test) {
+ case 0:
+ case 3:
+ case 6:
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+ }
+ }
+
return 0;
}
static enum sci_status sci_oem_parameters_set(struct isci_host *ihost)
{
u32 state = ihost->sm.current_state_id;
+ struct isci_pci_info *pci_info = to_pci_info(ihost->pdev);
if (state == SCIC_RESET ||
state == SCIC_INITIALIZING ||
state == SCIC_INITIALIZED) {
- if (sci_oem_parameters_validate(&ihost->oem_parameters))
+ if (sci_oem_parameters_validate(&ihost->oem_parameters,
+ pci_info->orom->hdr.version))
return SCI_FAILURE_INVALID_PARAMETER_VALUE;
return SCI_SUCCESS;
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index a97edabcb85..8a34fd92e42 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -466,7 +466,8 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic
orom = isci_request_oprom(pdev);
for (i = 0; orom && i < ARRAY_SIZE(orom->ctrl); i++) {
- if (sci_oem_parameters_validate(&orom->ctrl[i])) {
+ if (sci_oem_parameters_validate(&orom->ctrl[i],
+ orom->hdr.version)) {
dev_warn(&pdev->dev,
"[%d]: invalid oem parameters detected, falling back to firmware\n", i);
devm_kfree(&pdev->dev, orom);
diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c
index c650d3003c2..61000cde84c 100644
--- a/drivers/scsi/isci/phy.c
+++ b/drivers/scsi/isci/phy.c
@@ -144,10 +144,59 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy,
phy_cap.gen3_no_ssc = 1;
phy_cap.gen2_no_ssc = 1;
phy_cap.gen1_no_ssc = 1;
- if (ihost->oem_parameters.controller.do_enable_ssc == true) {
+ if (ihost->oem_parameters.controller.do_enable_ssc) {
+ struct scu_afe_registers __iomem *afe = &ihost->scu_registers->afe;
+ struct scu_afe_transceiver *xcvr = &afe->scu_afe_xcvr[phy_idx];
+ struct isci_pci_info *pci_info = to_pci_info(ihost->pdev);
+ bool en_sas = false;
+ bool en_sata = false;
+ u32 sas_type = 0;
+ u32 sata_spread = 0x2;
+ u32 sas_spread = 0x2;
+
phy_cap.gen3_ssc = 1;
phy_cap.gen2_ssc = 1;
phy_cap.gen1_ssc = 1;
+
+ if (pci_info->orom->hdr.version < ISCI_ROM_VER_1_1)
+ en_sas = en_sata = true;
+ else {
+ sata_spread = ihost->oem_parameters.controller.ssc_sata_tx_spread_level;
+ sas_spread = ihost->oem_parameters.controller.ssc_sas_tx_spread_level;
+
+ if (sata_spread)
+ en_sata = true;
+
+ if (sas_spread) {
+ en_sas = true;
+ sas_type = ihost->oem_parameters.controller.ssc_sas_tx_type;
+ }
+
+ }
+
+ if (en_sas) {
+ u32 reg;
+
+ reg = readl(&xcvr->afe_xcvr_control0);
+ reg |= (0x00100000 | (sas_type << 19));
+ writel(reg, &xcvr->afe_xcvr_control0);
+
+ reg = readl(&xcvr->afe_tx_ssc_control);
+ reg |= sas_spread << 8;
+ writel(reg, &xcvr->afe_tx_ssc_control);
+ }
+
+ if (en_sata) {
+ u32 reg;
+
+ reg = readl(&xcvr->afe_tx_ssc_control);
+ reg |= sata_spread;
+ writel(reg, &xcvr->afe_tx_ssc_control);
+
+ reg = readl(&llr->stp_control);
+ reg |= 1 << 12;
+ writel(reg, &llr->stp_control);
+ }
}
/* The SAS specification indicates that the phy_capabilities that
diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h
index 2c75248ca32..42dd05414f3 100644
--- a/drivers/scsi/isci/probe_roms.h
+++ b/drivers/scsi/isci/probe_roms.h
@@ -152,7 +152,7 @@ struct sci_user_parameters {
#define MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT 4
struct sci_oem_params;
-int sci_oem_parameters_validate(struct sci_oem_params *oem);
+int sci_oem_parameters_validate(struct sci_oem_params *oem, u8 version);
struct isci_orom;
struct isci_orom *isci_request_oprom(struct pci_dev *pdev);
@@ -191,6 +191,10 @@ struct isci_oem_hdr {
0x1a, 0x04, 0xc6)
#define ISCI_EFI_VAR_NAME "RstScuO"
+#define ISCI_ROM_VER_1_0 0x10
+#define ISCI_ROM_VER_1_1 0x11
+#define ISCI_ROM_VER_LATEST ISCI_ROM_VER_1_1
+
/* Allowed PORT configuration modes APC Automatic PORT configuration mode is
* defined by the OEM configuration parameters providing no PHY_MASK parameters
* for any PORT. i.e. There are no phys assigned to any of the ports at start.
@@ -220,7 +224,52 @@ struct sci_oem_params {
struct {
uint8_t mode_type;
uint8_t max_concurr_spin_up;
- uint8_t do_enable_ssc;
+ /*
+ * This bitfield indicates the OEM's desired default Tx
+ * Spread Spectrum Clocking (SSC) settings for SATA and SAS.
+ * NOTE: Default SSC Modulation Frequency is 31.5KHz.
+ */
+ union {
+ struct {
+ /*
+ * NOTE: Max spread for SATA is +0 / -5000 PPM.
+ * Down-spreading SSC (only method allowed for SATA):
+ * SATA SSC Tx Disabled = 0x0
+ * SATA SSC Tx at +0 / -1419 PPM Spread = 0x2
+ * SATA SSC Tx at +0 / -2129 PPM Spread = 0x3
+ * SATA SSC Tx at +0 / -4257 PPM Spread = 0x6
+ * SATA SSC Tx at +0 / -4967 PPM Spread = 0x7
+ */
+ uint8_t ssc_sata_tx_spread_level:4;
+ /*
+ * SAS SSC Tx Disabled = 0x0
+ *
+ * NOTE: Max spread for SAS down-spreading +0 /
+ * -2300 PPM
+ * Down-spreading SSC:
+ * SAS SSC Tx at +0 / -1419 PPM Spread = 0x2
+ * SAS SSC Tx at +0 / -2129 PPM Spread = 0x3
+ *
+ * NOTE: Max spread for SAS center-spreading +2300 /
+ * -2300 PPM
+ * Center-spreading SSC:
+ * SAS SSC Tx at +1064 / -1064 PPM Spread = 0x3
+ * SAS SSC Tx at +2129 / -2129 PPM Spread = 0x6
+ */
+ uint8_t ssc_sas_tx_spread_level:3;
+ /*
+ * NOTE: Refer to the SSC section of the SAS 2.x
+ * Specification for proper setting of this field.
+ * For standard SAS Initiator SAS PHY operation it
+ * should be 0 for Down-spreading.
+ * SAS SSC Tx spread type:
+ * Down-spreading SSC = 0
+ * Center-spreading SSC = 1
+ */
+ uint8_t ssc_sas_tx_type:1;
+ };
+ uint8_t do_enable_ssc;
+ };
uint8_t reserved;
} controller;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-21 15:18:10 +0000