diff options
Diffstat (limited to 'drivers/scsi')
| -rw-r--r-- | drivers/scsi/isci/core/scic_sds_controller.h | 20 | ||||
| -rw-r--r-- | drivers/scsi/isci/core/scic_sds_port.c | 2 | ||||
| -rw-r--r-- | drivers/scsi/isci/core/scic_sds_port.h | 4 | ||||
| -rw-r--r-- | drivers/scsi/isci/core/scic_sds_request.c | 24 | ||||
| -rw-r--r-- | drivers/scsi/isci/remote_device.c | 110 | ||||
| -rw-r--r-- | drivers/scsi/isci/remote_device.h | 34 | ||||
| -rw-r--r-- | drivers/scsi/isci/remote_node_context.c | 63 | ||||
| -rw-r--r-- | drivers/scsi/isci/request.c | 19 | ||||
| -rw-r--r-- | drivers/scsi/isci/task.c | 20 |
9 files changed, 118 insertions, 178 deletions
diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index e15c4e2fd76..ce81286e52f 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -74,9 +74,9 @@ #include "scic_sds_port.h" #include "scic_sds_phy.h" #include "remote_node_table.h" +#include "remote_device.h" #include "scu_registers.h" #include "scu_constants.h" -#include "scu_remote_node_context.h" #include "scu_task_context.h" #include "scu_unsolicited_frame.h" #include "scic_sds_unsolicited_frame_control.h" @@ -498,14 +498,16 @@ enum scic_sds_controller_states { #define scic_sds_io_sequence_increment(value) \ ((value) = (((value) + 1) & 0x000F)) -#define scic_sds_remote_device_node_count(device) \ - (\ - (\ - (device)->target_protocols.u.bits.attached_stp_target \ - && ((device)->is_direct_attached != true) \ - ) \ - ? SCU_STP_REMOTE_NODE_COUNT : SCU_SSP_REMOTE_NODE_COUNT \ - ) +/* expander attached sata devices require 3 rnc slots */ +static inline int scic_sds_remote_device_node_count(struct scic_sds_remote_device *sci_dev) +{ + struct domain_device *dev = sci_dev_to_domain(sci_dev); + + if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) && + !sci_dev->is_direct_attached) + return SCU_STP_REMOTE_NODE_COUNT; + return SCU_SSP_REMOTE_NODE_COUNT; +} /** * scic_sds_controller_set_invalid_phy() - diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index b07e48e2f18..057f95a79be 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -434,7 +434,7 @@ void scic_sds_port_get_attached_sas_address( * multi-protocol support. * */ -void scic_sds_port_get_attached_protocols( +static void scic_sds_port_get_attached_protocols( struct scic_sds_port *sci_port, struct sci_sas_identify_address_frame_protocols *protocols) { diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index 964e3885dbf..59c76cd3902 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -447,8 +447,4 @@ void scic_sds_port_get_attached_sas_address( struct scic_sds_port *sci_port, struct sci_sas_address *sas_address); -void scic_sds_port_get_attached_protocols( - struct scic_sds_port *sci_port, - struct sci_sas_identify_address_frame_protocols *protocols); - #endif /* _SCIC_SDS_PORT_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index dfb94121d44..a66e7b248b2 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -1758,8 +1758,8 @@ enum sci_status scic_io_request_construct(struct scic_sds_controller *scic, struct scic_sds_request *sci_req, struct scic_sds_request **new_scic_io_request_handle) { + struct domain_device *dev = sci_dev_to_domain(sci_dev); enum sci_status status = SCI_SUCCESS; - struct smp_discover_response_protocols device_protocol; /* Build the common part of the request */ scic_sds_general_request_construct(scic, sci_dev, io_tag, @@ -1768,19 +1768,16 @@ enum sci_status scic_io_request_construct(struct scic_sds_controller *scic, if (sci_dev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) return SCI_FAILURE_INVALID_REMOTE_DEVICE; - scic_remote_device_get_protocols(sci_dev, &device_protocol); - - if (device_protocol.u.bits.attached_ssp_target) { + if (dev->dev_type == SAS_END_DEV) { scic_sds_ssp_io_request_assign_buffers(sci_req); - } else if (device_protocol.u.bits.attached_stp_target) { + } else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { scic_sds_stp_request_assign_buffers(sci_req); memset(sci_req->command_buffer, 0, sizeof(struct sata_fis_reg_h2d)); - } else if (device_protocol.u.bits.attached_smp_target) { + } else if (dev_is_expander(dev)) { scic_sds_smp_request_assign_buffers(sci_req); memset(sci_req->command_buffer, 0, sizeof(struct smp_request)); - } else { + } else status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; - } if (status == SCI_SUCCESS) { memset(sci_req->task_context_buffer, 0, @@ -1798,17 +1795,15 @@ enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, struct scic_sds_request *sci_req, struct scic_sds_request **new_sci_req) { + struct domain_device *dev = sci_dev_to_domain(sci_dev); enum sci_status status = SCI_SUCCESS; - struct smp_discover_response_protocols device_protocol; /* Build the common part of the request */ scic_sds_general_request_construct(scic, sci_dev, io_tag, user_io_request_object, sci_req); - scic_remote_device_get_protocols(sci_dev, &device_protocol); - - if (device_protocol.u.bits.attached_ssp_target) { + if (dev->dev_type == SAS_END_DEV) { scic_sds_ssp_task_request_assign_buffers(sci_req); sci_req->has_started_substate_machine = true; @@ -1820,11 +1815,10 @@ enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, scic_sds_io_request_started_task_mgmt_substate_table, SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION ); - } else if (device_protocol.u.bits.attached_stp_target) { + } else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) scic_sds_stp_request_assign_buffers(sci_req); - } else { + else status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; - } if (status == SCI_SUCCESS) { sci_req->is_task_management_request = true; diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 70641818f60..fc79a5b47f7 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -100,13 +100,6 @@ enum sas_linkrate scic_remote_device_get_connection_rate( } -void scic_remote_device_get_protocols( - struct scic_sds_remote_device *sci_dev, - struct smp_discover_response_protocols *pr) -{ - pr->u.all = sci_dev->target_protocols.u.all; -} - #if !defined(DISABLE_ATAPI) bool scic_remote_device_is_atapi(struct scic_sds_remote_device *sci_dev) { @@ -1490,7 +1483,7 @@ static enum sci_status scic_remote_device_da_construct(struct scic_sds_port *sci { enum sci_status status; u16 remote_node_index; - struct sci_sas_identify_address_frame_protocols protocols; + struct domain_device *dev = sci_dev_to_domain(sci_dev); scic_remote_device_construct(sci_port, sci_dev); @@ -1498,53 +1491,46 @@ static enum sci_status scic_remote_device_da_construct(struct scic_sds_port *sci * This information is request to determine how many remote node context * entries will be needed to store the remote node. */ - scic_sds_port_get_attached_protocols(sci_dev->owning_port, &protocols); - sci_dev->target_protocols.u.all = protocols.u.all; sci_dev->is_direct_attached = true; -#if !defined(DISABLE_ATAPI) - sci_dev->is_atapi = scic_sds_remote_device_is_atapi(sci_dev); -#endif + status = scic_sds_controller_allocate_remote_node_context(sci_port->owning_controller, + sci_dev, + &remote_node_index); - status = scic_sds_controller_allocate_remote_node_context( - sci_dev->owning_port->owning_controller, - sci_dev, - &remote_node_index); + if (status != SCI_SUCCESS) + return status; - if (status == SCI_SUCCESS) { - sci_dev->rnc.remote_node_index = remote_node_index; + sci_dev->rnc.remote_node_index = remote_node_index; - scic_sds_port_get_attached_sas_address( - sci_dev->owning_port, &sci_dev->device_address); + scic_sds_port_get_attached_sas_address(sci_port, &sci_dev->device_address); - if (sci_dev->target_protocols.u.bits.attached_ssp_target) { - sci_dev->has_ready_substate_machine = false; - } else if (sci_dev->target_protocols.u.bits.attached_stp_target) { - sci_dev->has_ready_substate_machine = true; + if (dev->dev_type == SAS_END_DEV) + sci_dev->has_ready_substate_machine = false; + else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { + sci_dev->has_ready_substate_machine = true; - sci_base_state_machine_construct( + sci_base_state_machine_construct( &sci_dev->ready_substate_machine, &sci_dev->parent, scic_sds_stp_remote_device_ready_substate_table, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - } else if (sci_dev->target_protocols.u.bits.attached_smp_target) { - sci_dev->has_ready_substate_machine = true; + } else if (dev_is_expander(dev)) { + sci_dev->has_ready_substate_machine = true; - /* add the SMP ready substate machine construction here */ - sci_base_state_machine_construct( + /* add the SMP ready substate machine construction here */ + sci_base_state_machine_construct( &sci_dev->ready_substate_machine, &sci_dev->parent, scic_sds_smp_remote_device_ready_substate_table, SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - } + } else + return SCI_FAILURE_UNSUPPORTED_PROTOCOL; - sci_dev->connection_rate = scic_sds_port_get_max_allowed_speed( - sci_dev->owning_port); + sci_dev->connection_rate = scic_sds_port_get_max_allowed_speed(sci_port); - /* / @todo Should I assign the port width by reading all of the phys on the port? */ - sci_dev->device_port_width = 1; - } + /* / @todo Should I assign the port width by reading all of the phys on the port? */ + sci_dev->device_port_width = 1; - return status; + return SCI_SUCCESS; } static void scic_sds_remote_device_get_info_from_smp_discover_response( @@ -1557,8 +1543,6 @@ static void scic_sds_remote_device_get_info_from_smp_discover_response( sci_dev->device_address.low = discover_response->attached_sas_address.low; - - sci_dev->target_protocols.u.all = discover_response->protocols.u.all; } /** @@ -1579,6 +1563,7 @@ static enum sci_status scic_remote_device_ea_construct(struct scic_sds_port *sci struct smp_response_discover *discover_response) { struct scic_sds_controller *scic = sci_port->owning_controller; + struct domain_device *dev = sci_dev_to_domain(sci_dev); enum sci_status status; scic_remote_device_construct(sci_port, sci_dev); @@ -1588,43 +1573,42 @@ static enum sci_status scic_remote_device_ea_construct(struct scic_sds_port *sci status = scic_sds_controller_allocate_remote_node_context( scic, sci_dev, &sci_dev->rnc.remote_node_index); + if (status != SCI_SUCCESS) + return status; - if (status == SCI_SUCCESS) { - if (sci_dev->target_protocols.u.bits.attached_ssp_target) { - sci_dev->has_ready_substate_machine = false; - } else if (sci_dev->target_protocols.u.bits.attached_smp_target) { - sci_dev->has_ready_substate_machine = true; + if (dev->dev_type == SAS_END_DEV) + sci_dev->has_ready_substate_machine = false; + else if (dev_is_expander(dev)) { + sci_dev->has_ready_substate_machine = true; - /* add the SMP ready substate machine construction here */ - sci_base_state_machine_construct( + /* add the SMP ready substate machine construction here */ + sci_base_state_machine_construct( &sci_dev->ready_substate_machine, &sci_dev->parent, scic_sds_smp_remote_device_ready_substate_table, SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - } else if (sci_dev->target_protocols.u.bits.attached_stp_target) { - sci_dev->has_ready_substate_machine = true; + } else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { + sci_dev->has_ready_substate_machine = true; - sci_base_state_machine_construct( + sci_base_state_machine_construct( &sci_dev->ready_substate_machine, &sci_dev->parent, scic_sds_stp_remote_device_ready_substate_table, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - } + } - /* - * For SAS-2 the physical link rate is actually a logical link - * rate that incorporates multiplexing. The SCU doesn't - * incorporate multiplexing and for the purposes of the - * connection the logical link rate is that same as the - * physical. Furthermore, the SAS-2 and SAS-1.1 fields overlay - * one another, so this code works for both situations. */ - sci_dev->connection_rate = min_t(u16, - scic_sds_port_get_max_allowed_speed(sci_port), + /* + * For SAS-2 the physical link rate is actually a logical link + * rate that incorporates multiplexing. The SCU doesn't + * incorporate multiplexing and for the purposes of the + * connection the logical link rate is that same as the + * physical. Furthermore, the SAS-2 and SAS-1.1 fields overlay + * one another, so this code works for both situations. */ + sci_dev->connection_rate = min_t(u16, scic_sds_port_get_max_allowed_speed(sci_port), discover_response->u2.sas1_1.negotiated_physical_link_rate); - /* / @todo Should I assign the port width by reading all of the phys on the port? */ - sci_dev->device_port_width = 1; - } + /* / @todo Should I assign the port width by reading all of the phys on the port? */ + sci_dev->device_port_width = 1; return status; } @@ -1665,7 +1649,7 @@ static enum sci_status isci_remote_device_construct( enum sci_status status = SCI_SUCCESS; if (isci_device->domain_dev->parent && - (isci_device->domain_dev->parent->dev_type == EDGE_DEV)) { + dev_is_expander(isci_device->domain_dev->parent)) { int i; /* struct smp_response_discover discover_response; */ diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 9d8fcbf72de..39821601022 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -100,11 +100,6 @@ struct scic_sds_remote_device { enum sas_linkrate connection_rate; /** - * This field contains the allowed target protocols for this remote device. - */ - struct smp_discover_response_protocols target_protocols; - - /** * This field contains the device SAS address. */ struct sci_sas_address device_address; @@ -264,23 +259,6 @@ enum sci_status scic_remote_device_reset_complete( enum sas_linkrate scic_remote_device_get_connection_rate( struct scic_sds_remote_device *remote_device); -/** - * scic_remote_device_get_protocols() - This method will indicate which - * protocols are supported by this remote device. - * @remote_device: This parameter specifies the device for which to return the - * protocol. - * @protocols: This parameter specifies the output values, from the remote - * device object, which indicate the protocols supported by the supplied - * remote_device. - * - * The type of protocols supported by this device. The values are returned as - * part of a bit mask in order to allow for multi-protocol support. - */ -void scic_remote_device_get_protocols( - struct scic_sds_remote_device *remote_device, - struct smp_discover_response_protocols *protocols); - - #if !defined(DISABLE_ATAPI) /** * scic_remote_device_is_atapi() - @@ -477,6 +455,18 @@ static inline struct scic_sds_remote_device *rnc_to_dev(struct scic_sds_remote_n return sci_dev; } +static inline struct domain_device *sci_dev_to_domain(struct scic_sds_remote_device *sci_dev) +{ + struct isci_remote_device *idev = container_of(sci_dev, typeof(*idev), sci); + + return idev->domain_dev; +} + +static inline bool dev_is_expander(struct domain_device *dev) +{ + return dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV; +} + typedef enum sci_status (*scic_sds_remote_device_request_handler_t)( struct scic_sds_remote_device *device, struct scic_sds_request *request); diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index bdf0b5101cf..285232fd5e6 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -106,8 +106,9 @@ bool scic_sds_remote_node_context_is_ready( static void scic_sds_remote_node_context_construct_buffer( struct scic_sds_remote_node_context *sci_rnc) { - union scu_remote_node_context *rnc; struct scic_sds_remote_device *sci_dev = rnc_to_dev(sci_rnc); + struct domain_device *dev = sci_dev_to_domain(sci_dev); + union scu_remote_node_context *rnc; struct scic_sds_controller *scic; scic = scic_sds_remote_device_get_controller(sci_dev); @@ -134,11 +135,7 @@ static void scic_sds_remote_node_context_construct_buffer( rnc->ssp.arbitration_wait_time = 0; - - if ( - sci_dev->target_protocols.u.bits.attached_sata_device - || sci_dev->target_protocols.u.bits.attached_stp_target - ) { + if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { rnc->ssp.connection_occupancy_timeout = scic->user_parameters.sds1.stp_max_occupancy_timeout; rnc->ssp.connection_inactivity_timeout = @@ -639,45 +636,30 @@ static enum sci_status scic_sds_remote_node_context_tx_suspended_state_resume_ha scics_sds_remote_node_context_callback callback, void *callback_parameter) { - enum sci_status status; - struct smp_discover_response_protocols protocols; + struct scic_sds_remote_device *sci_dev = rnc_to_dev(sci_rnc); + struct domain_device *dev = sci_dev_to_domain(sci_dev); + enum sci_status status = SCI_SUCCESS; - scic_sds_remote_node_context_setup_to_resume( - sci_rnc, callback, callback_parameter - ); + scic_sds_remote_node_context_setup_to_resume(sci_rnc, callback, + callback_parameter); /* TODO: consider adding a resume action of NONE, INVALIDATE, WRITE_TLCR */ - - scic_remote_device_get_protocols(rnc_to_dev(sci_rnc), &protocols); - - if ( - (protocols.u.bits.attached_ssp_target == 1) - || (protocols.u.bits.attached_smp_target == 1) - ) { - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE - ); - - status = SCI_SUCCESS; - } else if (protocols.u.bits.attached_stp_target == 1) { - if (rnc_to_dev(sci_rnc)->is_direct_attached) { + if (dev->dev_type == SAS_END_DEV || dev_is_expander(dev)) + sci_base_state_machine_change_state(&sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE); + else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { + if (sci_dev->is_direct_attached) { /* @todo Fix this since I am being silly in writing to the STPTLDARNI register. */ sci_base_state_machine_change_state( &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE - ); + SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE); } else { sci_base_state_machine_change_state( &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE - ); + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE); } - - status = SCI_SUCCESS; - } else { + } else status = SCI_FAILURE; - } return status; } @@ -932,6 +914,7 @@ static void scic_sds_remote_node_context_validate_context_buffer( struct scic_sds_remote_node_context *sci_rnc) { struct scic_sds_remote_device *sci_dev = rnc_to_dev(sci_rnc); + struct domain_device *dev = sci_dev_to_domain(sci_dev); union scu_remote_node_context *rnc_buffer; rnc_buffer = scic_sds_controller_get_remote_node_context_buffer( @@ -942,7 +925,7 @@ static void scic_sds_remote_node_context_validate_context_buffer( rnc_buffer->ssp.is_valid = true; if (!sci_dev->is_direct_attached && - sci_dev->target_protocols.u.bits.attached_stp_target) { + (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP))) { scic_sds_remote_device_post_request(sci_dev, SCU_CONTEXT_COMMAND_POST_RNC_96); } else { @@ -1063,11 +1046,12 @@ static void scic_sds_remote_node_context_resuming_state_enter( struct sci_base_object *object) { struct scic_sds_remote_node_context *rnc; - struct smp_discover_response_protocols protocols; struct scic_sds_remote_device *sci_dev; + struct domain_device *dev; rnc = (struct scic_sds_remote_node_context *)object; sci_dev = rnc_to_dev(rnc); + dev = sci_dev_to_domain(sci_dev); SET_STATE_HANDLER( rnc, @@ -1081,13 +1065,10 @@ static void scic_sds_remote_node_context_resuming_state_enter( * resume because of a target reset we also need to update * the STPTLDARNI register with the RNi of the device */ - scic_remote_device_get_protocols(sci_dev, &protocols); - - if (protocols.u.bits.attached_stp_target == 1 && - sci_dev->is_direct_attached) { + if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) && + sci_dev->is_direct_attached) scic_sds_port_setup_transports(sci_dev->owning_port, rnc->remote_node_index); - } scic_sds_remote_device_post_request(sci_dev, SCU_CONTEXT_COMMAND_POST_RNC_RESUME); } diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index ff5c05a1954..281a556f5ee 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -175,7 +175,6 @@ static enum sci_status isci_io_request_build( struct isci_request *request, struct isci_remote_device *isci_device) { - struct smp_discover_response_protocols dev_protocols; enum sci_status status = SCI_SUCCESS; struct sas_task *task = isci_request_access_task(request); struct scic_sds_remote_device *sci_device = &isci_device->sci; @@ -228,15 +227,19 @@ static enum sci_status isci_io_request_build( sci_object_set_association(request->sci_request_handle, request); - /* Determine protocol and call the appropriate basic constructor */ - scic_remote_device_get_protocols(sci_device, &dev_protocols); - if (dev_protocols.u.bits.attached_ssp_target) + switch (task->task_proto) { + case SAS_PROTOCOL_SMP: + status = isci_smp_request_build(request); + break; + case SAS_PROTOCOL_SSP: status = isci_request_ssp_request_construct(request); - else if (dev_protocols.u.bits.attached_stp_target) + break; + case SAS_PROTOCOL_SATA: + case SAS_PROTOCOL_STP: + case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: status = isci_request_stp_request_construct(request); - else if (dev_protocols.u.bits.attached_smp_target) - status = isci_smp_request_build(request); - else { + break; + default: dev_warn(&isci_host->pdev->dev, "%s: unknown protocol\n", __func__); return SCI_FAILURE; diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index e011d668949..c6f1ffd713a 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -273,15 +273,14 @@ static enum sci_status isci_task_request_build( enum sci_status status = SCI_FAILURE; struct isci_request *request = NULL; struct isci_remote_device *isci_device; -/* struct sci_sas_identify_address_frame_protocols dev_protocols; */ - struct smp_discover_response_protocols dev_protocols; - + struct domain_device *dev; dev_dbg(&isci_host->pdev->dev, "%s: isci_tmf = %p\n", __func__, isci_tmf); isci_device = isci_tmf->device; sci_device = &isci_device->sci; + dev = isci_device->domain_dev; /* do common allocation and init of request object. */ status = isci_request_alloc_tmf( @@ -319,16 +318,8 @@ static enum sci_status isci_task_request_build( request ); - scic_remote_device_get_protocols( - sci_device, - &dev_protocols - ); - - /* let the core do it's protocol - * specific construction. - */ - if (dev_protocols.u.bits.attached_ssp_target) { - + /* XXX convert to get this from task->tproto like other drivers */ + if (dev->dev_type == SAS_END_DEV) { isci_tmf->proto = SAS_PROTOCOL_SSP; status = scic_task_request_construct_ssp( request->sci_request_handle @@ -337,8 +328,7 @@ static enum sci_status isci_task_request_build( goto errout; } - if (dev_protocols.u.bits.attached_stp_target) { - + if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { isci_tmf->proto = SAS_PROTOCOL_SATA; status = isci_sata_management_task_request_build(request); |