diff options
Diffstat (limited to 'drivers/serial/8250.c')
| -rw-r--r-- | drivers/serial/8250.c | 28 |
1 files changed, 14 insertions, 14 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index bc36edff205..7aca22c9976 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -31,7 +31,6 @@ #include <linux/init.h> #include <linux/console.h> #include <linux/sysrq.h> -#include <linux/mca.h> #include <linux/delay.h> #include <linux/platform_device.h> #include <linux/tty.h> @@ -2027,12 +2026,6 @@ static void serial8250_config_port(struct uart_port *port, int flags) int ret; /* - * Don't probe for MCA ports on non-MCA machines. - */ - if (up->port.flags & UPF_BOOT_ONLYMCA && !MCA_bus) - return; - - /* * Find the region that we can probe for. This in turn * tells us whether we can probe for the type of port. */ @@ -2164,7 +2157,7 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev) /* * Wait for transmitter & holding register to empty */ -static inline void wait_for_xmitr(struct uart_8250_port *up) +static inline void wait_for_xmitr(struct uart_8250_port *up, int bits) { unsigned int status, tmout = 10000; @@ -2178,7 +2171,7 @@ static inline void wait_for_xmitr(struct uart_8250_port *up) if (--tmout == 0) break; udelay(1); - } while ((status & BOTH_EMPTY) != BOTH_EMPTY); + } while ((status & bits) != bits); /* Wait up to 1s for flow control if necessary */ if (up->port.flags & UPF_CONS_FLOW) { @@ -2205,7 +2198,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) touch_nmi_watchdog(); /* - * First save the UER then disable the interrupts + * First save the IER then disable the interrupts */ ier = serial_in(up, UART_IER); @@ -2218,7 +2211,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) * Now, do each character */ for (i = 0; i < count; i++, s++) { - wait_for_xmitr(up); + wait_for_xmitr(up, UART_LSR_THRE); /* * Send the character out. @@ -2226,7 +2219,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) */ serial_out(up, UART_TX, *s); if (*s == 10) { - wait_for_xmitr(up); + wait_for_xmitr(up, UART_LSR_THRE); serial_out(up, UART_TX, 13); } } @@ -2235,8 +2228,9 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) * Finally, wait for transmitter to become empty * and restore the IER */ - wait_for_xmitr(up); - serial_out(up, UART_IER, ier); + wait_for_xmitr(up, BOTH_EMPTY); + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, ier | UART_IER_THRI); } static int serial8250_console_setup(struct console *co, char *options) @@ -2332,6 +2326,12 @@ static struct uart_driver serial8250_reg = { .cons = SERIAL8250_CONSOLE, }; +/* + * early_serial_setup - early registration for 8250 ports + * + * Setup an 8250 port structure prior to console initialisation. Use + * after console initialisation will cause undefined behaviour. + */ int __init early_serial_setup(struct uart_port *port) { if (port->line >= ARRAY_SIZE(serial8250_ports)) |