diff options
Diffstat (limited to 'drivers/serial/8250.c')
| -rw-r--r-- | drivers/serial/8250.c | 39 |
1 files changed, 24 insertions, 15 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 0ae9ced00ed..cc2a205d423 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -320,8 +320,8 @@ static unsigned int serial_in(struct uart_8250_port *up, int offset) case UPIO_TSI: if (offset == UART_IIR) { - tmp = readl((u32 *)(up->port.membase + UART_RX)); - return (cpu_to_le32(tmp) >> 8) & 0xff; + tmp = readl(up->port.membase + (UART_IIR & ~3)); + return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */ } else return readb(up->port.membase + offset); @@ -1896,6 +1896,17 @@ serial8250_set_termios(struct uart_port *port, struct termios *termios, serial_outp(up, UART_EFR, efr); } +#ifdef CONFIG_ARCH_OMAP15XX + /* Workaround to enable 115200 baud on OMAP1510 internal ports */ + if (cpu_is_omap1510() && is_omap_port((unsigned int)up->port.membase)) { + if (baud == 115200) { + quot = 1; + serial_out(up, UART_OMAP_OSC_12M_SEL, 1); + } else + serial_out(up, UART_OMAP_OSC_12M_SEL, 0); + } +#endif + if (up->capabilities & UART_NATSEMI) { /* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */ serial_outp(up, UART_LCR, 0xe0); @@ -1949,6 +1960,8 @@ static int serial8250_request_std_resource(struct uart_8250_port *up) case UPIO_AU: size = 0x100000; /* fall thru */ + case UPIO_TSI: + case UPIO_MEM32: case UPIO_MEM: if (!up->port.mapbase) break; @@ -1984,6 +1997,8 @@ static void serial8250_release_std_resource(struct uart_8250_port *up) case UPIO_AU: size = 0x100000; /* fall thru */ + case UPIO_TSI: + case UPIO_MEM32: case UPIO_MEM: if (!up->port.mapbase) break; @@ -2007,17 +2022,15 @@ static int serial8250_request_rsa_resource(struct uart_8250_port *up) { unsigned long start = UART_RSA_BASE << up->port.regshift; unsigned int size = 8 << up->port.regshift; - int ret = 0; + int ret = -EINVAL; switch (up->port.iotype) { - case UPIO_MEM: - ret = -EINVAL; - break; - case UPIO_HUB6: case UPIO_PORT: start += up->port.iobase; - if (!request_region(start, size, "serial-rsa")) + if (request_region(start, size, "serial-rsa")) + ret = 0; + else ret = -EBUSY; break; } @@ -2031,9 +2044,6 @@ static void serial8250_release_rsa_resource(struct uart_8250_port *up) unsigned int size = 8 << up->port.regshift; switch (up->port.iotype) { - case UPIO_MEM: - break; - case UPIO_HUB6: case UPIO_PORT: release_region(up->port.iobase + offset, size); @@ -2222,9 +2232,10 @@ static inline void wait_for_xmitr(struct uart_8250_port *up, int bits) /* Wait up to 1s for flow control if necessary */ if (up->port.flags & UPF_CONS_FLOW) { tmout = 1000000; - while (--tmout && - ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) + while (!(serial_in(up, UART_MSR) & UART_MSR_CTS) && --tmout) { udelay(1); + touch_nmi_watchdog(); + } } } @@ -2397,7 +2408,6 @@ int __init early_serial_setup(struct uart_port *port) /** * serial8250_suspend_port - suspend one serial port * @line: serial line number - * @level: the level of port suspension, as per uart_suspend_port * * Suspend one serial port. */ @@ -2409,7 +2419,6 @@ void serial8250_suspend_port(int line) /** * serial8250_resume_port - resume one serial port * @line: serial line number - * @level: the level of port resumption, as per uart_resume_port * * Resume one serial port. */ |