diff options
Diffstat (limited to 'drivers/serial/8250.c')
| -rw-r--r-- | drivers/serial/8250.c | 26 |
1 files changed, 13 insertions, 13 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 09a550860dc..ee74c934de8 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -653,13 +653,13 @@ static void serial8250_set_sleep(struct uart_8250_port *p, int sleep) { if (p->capabilities & UART_CAP_SLEEP) { if (p->capabilities & UART_CAP_EFR) { - serial_outp(p, UART_LCR, 0xBF); + serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_B); serial_outp(p, UART_EFR, UART_EFR_ECB); serial_outp(p, UART_LCR, 0); } serial_outp(p, UART_IER, sleep ? UART_IERX_SLEEP : 0); if (p->capabilities & UART_CAP_EFR) { - serial_outp(p, UART_LCR, 0xBF); + serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_B); serial_outp(p, UART_EFR, 0); serial_outp(p, UART_LCR, 0); } @@ -752,7 +752,7 @@ static int size_fifo(struct uart_8250_port *up) serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); serial_outp(up, UART_MCR, UART_MCR_LOOP); - serial_outp(up, UART_LCR, UART_LCR_DLAB); + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); old_dl = serial_dl_read(up); serial_dl_write(up, 0x0001); serial_outp(up, UART_LCR, 0x03); @@ -764,7 +764,7 @@ static int size_fifo(struct uart_8250_port *up) serial_inp(up, UART_RX); serial_outp(up, UART_FCR, old_fcr); serial_outp(up, UART_MCR, old_mcr); - serial_outp(up, UART_LCR, UART_LCR_DLAB); + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); serial_dl_write(up, old_dl); serial_outp(up, UART_LCR, old_lcr); @@ -782,7 +782,7 @@ static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p) unsigned int id; old_lcr = serial_inp(p, UART_LCR); - serial_outp(p, UART_LCR, UART_LCR_DLAB); + serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_A); old_dll = serial_inp(p, UART_DLL); old_dlm = serial_inp(p, UART_DLM); @@ -836,7 +836,7 @@ static void autoconfig_has_efr(struct uart_8250_port *up) * recommended for new designs). */ up->acr = 0; - serial_out(up, UART_LCR, 0xBF); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_out(up, UART_EFR, UART_EFR_ECB); serial_out(up, UART_LCR, 0x00); id1 = serial_icr_read(up, UART_ID1); @@ -945,7 +945,7 @@ static void autoconfig_16550a(struct uart_8250_port *up) * Check for presence of the EFR when DLAB is set. * Only ST16C650V1 UARTs pass this test. */ - serial_outp(up, UART_LCR, UART_LCR_DLAB); + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); if (serial_in(up, UART_EFR) == 0) { serial_outp(up, UART_EFR, 0xA8); if (serial_in(up, UART_EFR) != 0) { @@ -963,7 +963,7 @@ static void autoconfig_16550a(struct uart_8250_port *up) * Maybe it requires 0xbf to be written to the LCR. * (other ST16C650V2 UARTs, TI16C752A, etc) */ - serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) { DEBUG_AUTOCONF("EFRv2 "); autoconfig_has_efr(up); @@ -1024,7 +1024,7 @@ static void autoconfig_16550a(struct uart_8250_port *up) serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); status1 = serial_in(up, UART_IIR) >> 5; serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); - serial_outp(up, UART_LCR, UART_LCR_DLAB); + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); status2 = serial_in(up, UART_IIR) >> 5; serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); @@ -1183,7 +1183,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) * We also initialise the EFR (if any) to zero for later. The * EFR occupies the same register location as the FCR and IIR. */ - serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_outp(up, UART_EFR, 0); serial_outp(up, UART_LCR, 0); @@ -1952,7 +1952,7 @@ static int serial8250_startup(struct uart_port *port) if (up->port.type == PORT_16C950) { /* Wake up and initialize UART */ up->acr = 0; - serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_outp(up, UART_EFR, UART_EFR_ECB); serial_outp(up, UART_IER, 0); serial_outp(up, UART_LCR, 0); @@ -2002,7 +2002,7 @@ static int serial8250_startup(struct uart_port *port) if (up->port.type == PORT_16850) { unsigned char fctr; - serial_outp(up, UART_LCR, 0xbf); + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); fctr = serial_inp(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX); serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_RX); @@ -2363,7 +2363,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, if (termios->c_cflag & CRTSCTS) efr |= UART_EFR_CTS; - serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_outp(up, UART_EFR, efr); } |