summaryrefslogtreecommitdiffstats
path: root/drivers/serial/8250.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial/8250.c')
-rw-r--r--drivers/serial/8250.c122
1 files changed, 95 insertions, 27 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 4d75cdfa0a0..d2bcd1f87cd 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -33,13 +33,14 @@
#include <linux/sysrq.h>
#include <linux/mca.h>
#include <linux/delay.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial_reg.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
+#include <linux/nmi.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -101,7 +102,7 @@ static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
#define SERIAL_PORT_DFNS
#endif
-static struct old_serial_port old_serial_port[] = {
+static const struct old_serial_port old_serial_port[] = {
SERIAL_PORT_DFNS /* defined in asm/serial.h */
};
@@ -251,9 +252,53 @@ static const struct serial8250_config uart_config[] = {
},
};
+#ifdef CONFIG_SERIAL_8250_AU1X00
+
+/* Au1x00 UART hardware has a weird register layout */
+static const u8 au_io_in_map[] = {
+ [UART_RX] = 0,
+ [UART_IER] = 2,
+ [UART_IIR] = 3,
+ [UART_LCR] = 5,
+ [UART_MCR] = 6,
+ [UART_LSR] = 7,
+ [UART_MSR] = 8,
+};
+
+static const u8 au_io_out_map[] = {
+ [UART_TX] = 1,
+ [UART_IER] = 2,
+ [UART_FCR] = 4,
+ [UART_LCR] = 5,
+ [UART_MCR] = 6,
+};
+
+/* sane hardware needs no mapping */
+static inline int map_8250_in_reg(struct uart_8250_port *up, int offset)
+{
+ if (up->port.iotype != UPIO_AU)
+ return offset;
+ return au_io_in_map[offset];
+}
+
+static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
+{
+ if (up->port.iotype != UPIO_AU)
+ return offset;
+ return au_io_out_map[offset];
+}
+
+#else
+
+/* sane hardware needs no mapping */
+#define map_8250_in_reg(up, offset) (offset)
+#define map_8250_out_reg(up, offset) (offset)
+
+#endif
+
static _INLINE_ unsigned int serial_in(struct uart_8250_port *up, int offset)
{
- offset <<= up->port.regshift;
+ offset = map_8250_in_reg(up, offset) << up->port.regshift;
switch (up->port.iotype) {
case UPIO_HUB6:
@@ -266,6 +311,11 @@ static _INLINE_ unsigned int serial_in(struct uart_8250_port *up, int offset)
case UPIO_MEM32:
return readl(up->port.membase + offset);
+#ifdef CONFIG_SERIAL_8250_AU1X00
+ case UPIO_AU:
+ return __raw_readl(up->port.membase + offset);
+#endif
+
default:
return inb(up->port.iobase + offset);
}
@@ -274,7 +324,7 @@ static _INLINE_ unsigned int serial_in(struct uart_8250_port *up, int offset)
static _INLINE_ void
serial_out(struct uart_8250_port *up, int offset, int value)
{
- offset <<= up->port.regshift;
+ offset = map_8250_out_reg(up, offset) << up->port.regshift;
switch (up->port.iotype) {
case UPIO_HUB6:
@@ -290,6 +340,12 @@ serial_out(struct uart_8250_port *up, int offset, int value)
writel(value, up->port.membase + offset);
break;
+#ifdef CONFIG_SERIAL_8250_AU1X00
+ case UPIO_AU:
+ __raw_writel(value, up->port.membase + offset);
+ break;
+#endif
+
default:
outb(value, up->port.iobase + offset);
}
@@ -910,6 +966,13 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
}
}
#endif
+
+#ifdef CONFIG_SERIAL_8250_AU1X00
+ /* if access method is AU, it is a 16550 with a quirk */
+ if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
+ up->bugs |= UART_BUG_NOMSR;
+#endif
+
serial_outp(up, UART_LCR, save_lcr);
if (up->capabilities != uart_config[up->port.type].flags) {
@@ -936,7 +999,10 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
serial_outp(up, UART_MCR, save_mcr);
serial8250_clear_fifos(up);
(void)serial_in(up, UART_RX);
- serial_outp(up, UART_IER, 0);
+ if (up->capabilities & UART_CAP_UUE)
+ serial_outp(up, UART_IER, UART_IER_UUE);
+ else
+ serial_outp(up, UART_IER, 0);
out:
spin_unlock_irqrestore(&up->port.lock, flags);
@@ -1057,6 +1123,10 @@ static void serial8250_enable_ms(struct uart_port *port)
{
struct uart_8250_port *up = (struct uart_8250_port *)port;
+ /* no MSR capabilities */
+ if (up->bugs & UART_BUG_NOMSR)
+ return;
+
up->ier |= UART_IER_MSI;
serial_out(up, UART_IER, up->ier);
}
@@ -1774,7 +1844,8 @@ serial8250_set_termios(struct uart_port *port, struct termios *termios,
* CTS flow control flag and modem status interrupts
*/
up->ier &= ~UART_IER_MSI;
- if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+ if (!(up->bugs & UART_BUG_NOMSR) &&
+ UART_ENABLE_MS(&up->port, termios->c_cflag))
up->ier |= UART_IER_MSI;
if (up->capabilities & UART_CAP_UUE)
up->ier |= UART_IER_UUE | UART_IER_RTOIE;
@@ -2141,6 +2212,8 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
unsigned int ier;
int i;
+ touch_nmi_watchdog();
+
/*
* First save the UER then disable the interrupts
*/
@@ -2311,9 +2384,9 @@ void serial8250_resume_port(int line)
* list is terminated with a zero flags entry, which means we expect
* all entries to have at least UPF_BOOT_AUTOCONF set.
*/
-static int __devinit serial8250_probe(struct device *dev)
+static int __devinit serial8250_probe(struct platform_device *dev)
{
- struct plat_serial8250_port *p = dev->platform_data;
+ struct plat_serial8250_port *p = dev->dev.platform_data;
struct uart_port port;
int ret, i;
@@ -2329,12 +2402,12 @@ static int __devinit serial8250_probe(struct device *dev)
port.flags = p->flags;
port.mapbase = p->mapbase;
port.hub6 = p->hub6;
- port.dev = dev;
+ port.dev = &dev->dev;
if (share_irqs)
port.flags |= UPF_SHARE_IRQ;
ret = serial8250_register_port(&port);
if (ret < 0) {
- dev_err(dev, "unable to register port at index %d "
+ dev_err(&dev->dev, "unable to register port at index %d "
"(IO%lx MEM%lx IRQ%d): %d\n", i,
p->iobase, p->mapbase, p->irq, ret);
}
@@ -2345,60 +2418,55 @@ static int __devinit serial8250_probe(struct device *dev)
/*
* Remove serial ports registered against a platform device.
*/
-static int __devexit serial8250_remove(struct device *dev)
+static int __devexit serial8250_remove(struct platform_device *dev)
{
int i;
for (i = 0; i < UART_NR; i++) {
struct uart_8250_port *up = &serial8250_ports[i];
- if (up->port.dev == dev)
+ if (up->port.dev == &dev->dev)
serial8250_unregister_port(i);
}
return 0;
}
-static int serial8250_suspend(struct device *dev, pm_message_t state, u32 level)
+static int serial8250_suspend(struct platform_device *dev, pm_message_t state)
{
int i;
- if (level != SUSPEND_DISABLE)
- return 0;
-
for (i = 0; i < UART_NR; i++) {
struct uart_8250_port *up = &serial8250_ports[i];
- if (up->port.type != PORT_UNKNOWN && up->port.dev == dev)
+ if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
uart_suspend_port(&serial8250_reg, &up->port);
}
return 0;
}
-static int serial8250_resume(struct device *dev, u32 level)
+static int serial8250_resume(struct platform_device *dev)
{
int i;
- if (level != RESUME_ENABLE)
- return 0;
-
for (i = 0; i < UART_NR; i++) {
struct uart_8250_port *up = &serial8250_ports[i];
- if (up->port.type != PORT_UNKNOWN && up->port.dev == dev)
+ if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
uart_resume_port(&serial8250_reg, &up->port);
}
return 0;
}
-static struct device_driver serial8250_isa_driver = {
- .name = "serial8250",
- .bus = &platform_bus_type,
+static struct platform_driver serial8250_isa_driver = {
.probe = serial8250_probe,
.remove = __devexit_p(serial8250_remove),
.suspend = serial8250_suspend,
.resume = serial8250_resume,
+ .driver = {
+ .name = "serial8250",
+ },
};
/*
@@ -2544,7 +2612,7 @@ static int __init serial8250_init(void)
serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev);
- ret = driver_register(&serial8250_isa_driver);
+ ret = platform_driver_register(&serial8250_isa_driver);
if (ret == 0)
goto out;
@@ -2566,7 +2634,7 @@ static void __exit serial8250_exit(void)
*/
serial8250_isa_devs = NULL;
- driver_unregister(&serial8250_isa_driver);
+ platform_driver_unregister(&serial8250_isa_driver);
platform_device_unregister(isa_dev);
uart_unregister_driver(&serial8250_reg);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-05 09:26:29 +0000