summaryrefslogtreecommitdiffstats
path: root/drivers/serial/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial/Kconfig')
-rw-r--r--drivers/serial/Kconfig87
1 files changed, 58 insertions, 29 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 0b71e7d1890..2978c09860e 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -151,32 +151,6 @@ config SERIAL_8250_MANY_PORTS
say N here to save some memory. You can also say Y if you have an
"intelligent" multiport card such as Cyclades, Digiboards, etc.
-config SERIAL_8250_SHARE_IRQ
- bool "Support for sharing serial interrupts"
- depends on SERIAL_8250_EXTENDED
- help
- Some serial boards have hardware support which allows multiple dumb
- serial ports on the same board to share a single IRQ. To enable
- support for this in the serial driver, say Y here.
-
-config SERIAL_8250_DETECT_IRQ
- bool "Autodetect IRQ on standard ports (unsafe)"
- depends on SERIAL_8250_EXTENDED
- help
- Say Y here if you want the kernel to try to guess which IRQ
- to use for your serial port.
-
- This is considered unsafe; it is far better to configure the IRQ in
- a boot script using the setserial command.
-
- If unsure, say N.
-
-config SERIAL_8250_RSA
- bool "Support RSA serial ports"
- depends on SERIAL_8250_EXTENDED
- help
- ::: To be written :::
-
#
# Multi-port serial cards
#
@@ -199,7 +173,6 @@ config SERIAL_8250_ACCENT
To compile this driver as a module, choose M here: the module
will be called 8250_accent.
-
config SERIAL_8250_BOCA
tristate "Support Boca cards"
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
@@ -210,6 +183,17 @@ config SERIAL_8250_BOCA
To compile this driver as a module, choose M here: the module
will be called 8250_boca.
+config SERIAL_8250_EXAR_ST16C554
+ tristate "Support Exar ST16C554/554D Quad UART"
+ depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+ help
+ The Uplogix Envoy TU301 uses this Exar Quad UART. If you are
+ tinkering with your Envoy TU301, or have a machine with this UART,
+ say Y here.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8250_exar_st16c554.
+
config SERIAL_8250_HUB6
tristate "Support Hub6 cards"
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
@@ -219,6 +203,32 @@ config SERIAL_8250_HUB6
To compile this driver as a module, choose M here: the module
will be called 8250_hub6.
+config SERIAL_8250_SHARE_IRQ
+ bool "Support for sharing serial interrupts"
+ depends on SERIAL_8250_EXTENDED
+ help
+ Some serial boards have hardware support which allows multiple dumb
+ serial ports on the same board to share a single IRQ. To enable
+ support for this in the serial driver, say Y here.
+
+config SERIAL_8250_DETECT_IRQ
+ bool "Autodetect IRQ on standard ports (unsafe)"
+ depends on SERIAL_8250_EXTENDED
+ help
+ Say Y here if you want the kernel to try to guess which IRQ
+ to use for your serial port.
+
+ This is considered unsafe; it is far better to configure the IRQ in
+ a boot script using the setserial command.
+
+ If unsure, say N.
+
+config SERIAL_8250_RSA
+ bool "Support RSA serial ports"
+ depends on SERIAL_8250_EXTENDED
+ help
+ ::: To be written :::
+
config SERIAL_8250_MCA
tristate "Support 8250-type ports on MCA buses"
depends on SERIAL_8250 != n && MCA
@@ -511,6 +521,25 @@ config SERIAL_IMX_CONSOLE
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
+config SERIAL_UARTLITE
+ tristate "Xilinx uartlite serial port support"
+ depends on PPC32
+ select SERIAL_CORE
+ help
+ Say Y here if you want to use the Xilinx uartlite serial controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called uartlite.ko.
+
+config SERIAL_UARTLITE_CONSOLE
+ bool "Support for console on Xilinx uartlite serial port"
+ depends on SERIAL_UARTLITE=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Say Y here if you wish to use a Xilinx uartlite as the system
+ console (the system console is the device which receives all kernel
+ messages and warnings and which allows logins in single user mode).
+
config SERIAL_SUNCORE
bool
depends on SPARC
@@ -634,7 +663,7 @@ config V850E_UART
config V850E_UARTB
bool
- depends V850E_UART && V850E_ME2
+ depends on V850E_UART && V850E_ME2
default y
config V850E_UART_CONSOLE
@@ -880,7 +909,7 @@ config SERIAL_M32R_PLDSIO
config SERIAL_TXX9
bool "TMPTX39XX/49XX SIO support"
- depends HAS_TXX9_SERIAL
+ depends on HAS_TXX9_SERIAL
select SERIAL_CORE
default y