diff options
Diffstat (limited to 'drivers/serial/Kconfig')
| -rw-r--r-- | drivers/serial/Kconfig | 53 |
1 files changed, 37 insertions, 16 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 131901bfd5d..343e3a35b6a 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -533,6 +533,13 @@ config SERIAL_S3C6400 Serial port support for the Samsung S3C6400 and S3C6410 SoCs +config SERIAL_MAX3100 + tristate "MAX3100 support" + depends on SPI + select SERIAL_CORE + help + MAX3100 chip support + config SERIAL_DZ bool "DECstation DZ serial driver" depends on MACH_DECSTATION && 32BIT @@ -628,7 +635,7 @@ config SERIAL_MPSC_CONSOLE config SERIAL_PXA bool "PXA serial port support" - depends on ARM && ARCH_PXA + depends on ARCH_PXA || ARCH_MMP select SERIAL_CORE help If you have a machine based on an Intel XScale PXA2xx CPU you @@ -700,7 +707,7 @@ choice config SERIAL_BFIN_DMA bool "DMA mode" - depends on !DMA_UNCACHED_NONE && !KGDB_UART + depends on !DMA_UNCACHED_NONE && KGDB_SERIAL_CONSOLE=n help This driver works under DMA mode. If this option is selected, the blackfin simple dma driver is also enabled. @@ -727,19 +734,19 @@ config BFIN_UART0_CTSRTS config UART0_CTS_PIN int "UART0 CTS pin" - depends on BFIN_UART0_CTSRTS + depends on BFIN_UART0_CTSRTS && !BF548 default 23 help The default pin is GPIO_GP7. - Refer to ./include/asm-blackfin/gpio.h to see the GPIO map. + Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map. config UART0_RTS_PIN int "UART0 RTS pin" - depends on BFIN_UART0_CTSRTS + depends on BFIN_UART0_CTSRTS && !BF548 default 22 help The default pin is GPIO_GP6. - Refer to ./include/asm-blackfin/gpio.h to see the GPIO map. + Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map. config SERIAL_BFIN_UART1 bool "Enable UART1" @@ -756,21 +763,21 @@ config BFIN_UART1_CTSRTS config UART1_CTS_PIN int "UART1 CTS pin" - depends on BFIN_UART1_CTSRTS && !BF54x + depends on BFIN_UART1_CTSRTS && !BF548 default -1 help - Refer to ./include/asm-blackfin/gpio.h to see the GPIO map. + Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map. config UART1_RTS_PIN int "UART1 RTS pin" - depends on BFIN_UART1_CTSRTS && !BF54x + depends on BFIN_UART1_CTSRTS && !BF548 default -1 help - Refer to ./include/asm-blackfin/gpio.h to see the GPIO map. + Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map. config SERIAL_BFIN_UART2 bool "Enable UART2" - depends on SERIAL_BFIN && (BF54x) + depends on SERIAL_BFIN && (BF54x || BF538 || BF539) help Enable UART2 @@ -783,17 +790,17 @@ config BFIN_UART2_CTSRTS config UART2_CTS_PIN int "UART2 CTS pin" - depends on BFIN_UART2_CTSRTS + depends on BFIN_UART2_CTSRTS && !BF548 default -1 help - Refer to ./include/asm-blackfin/gpio.h to see the GPIO map. + Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map. config UART2_RTS_PIN int "UART2 RTS pin" - depends on BFIN_UART2_CTSRTS + depends on BFIN_UART2_CTSRTS && !BF548 default -1 help - Refer to ./include/asm-blackfin/gpio.h to see the GPIO map. + Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map. config SERIAL_BFIN_UART3 bool "Enable UART3" @@ -808,6 +815,20 @@ config BFIN_UART3_CTSRTS Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS signal. +config UART3_CTS_PIN + int "UART3 CTS pin" + depends on BFIN_UART3_CTSRTS && !BF548 + default -1 + help + Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map. + +config UART3_RTS_PIN + int "UART3 RTS pin" + depends on BFIN_UART3_CTSRTS && !BF548 + default -1 + help + Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map. + config SERIAL_IMX bool "IMX serial port support" depends on ARM && (ARCH_IMX || ARCH_MXC) @@ -1374,7 +1395,7 @@ config SERIAL_BFIN_SPORT depends on BLACKFIN && EXPERIMENTAL select SERIAL_CORE help - Enble support SPORT emulate UART on Blackfin series. + Enable SPORT emulate UART on Blackfin series. To compile this driver as a module, choose M here: the module will be called bfin_sport_uart. |